Seagate ST68022CF User Manual

Installing your ST1.2 Series CompactFlash model disc drive  
Each product, which utilizes CompactFlash storage devices, has its own  
unique removable media compartment. Refer to the product’s user manual  
to locate the media compartment and for instructions on removing and  
installing media devices.  
ST1.2 Series Installation Guide  
ST68022CF, ST68022FX, ST66022CF, ST66022FX, ST64022CF,  
and ST64022FX  
Warning. It may be necessary to turn off the product. Refer to your prod-  
uct’s operator manual for cautions, warnings and recommenda-  
tions on the installation and removal of media devices.  
CompactFlash/Flex Interface Disc Drives  
Note. This drive is designed for a product that supplies interface signals  
and +3.3V power through the CompactFlash connector. Refer to  
your consumer products manual to determine if your Seagate ST1.2  
Series disc drive is compatible. See Figure 2 for drive dimensions.  
Publication Number: 100375653, Rev. A, May 2005  
The easiest way to install your ST1.2 Series drive  
Recommended case  
Many of today’s consumer products, like cameras, notebook computers,  
MP3 players, printers and more have been designed to make it possible for  
the end user to use CompactFlash interface devices. Your Seagate® ST1.2  
Series drive is designed for such use. Refer to your product’s user manual  
for the location of the CompactFlash media compartment and the specific  
instructions regarding insertion and removal of removable media devices  
like the ST68022CF, ST66022CF and ST64022CF models. Your product  
manufacturer’s support Web site will have the most up-to-date information.  
Read and follow all instructions regarding the proper steps to be taken  
when using your Seagate ST1.2 Series disc drive.  
temp. measurement location  
G
FINGER GRIP  
F
Breather Hole  
Do not cover  
E
B
The Seagate ST1.2 Series Flex interface disc drive models, ST68022FX,  
ST66022FX and ST64022FX, are designed for embedded installation or as  
a fixed storage solution. Follow the installation instructions provided on this  
instruction sheet. Your product manufacturer’s support Web site will have  
the most up-to-date information on installing and removing storage devices.  
Read and follow all instructions regarding the proper steps to be taken  
when using your Seagate ST1.2 Series disc drive. It is important to follow  
the handling precautions and electrostatic discharge protection information  
below when handling any electronic device. It is always a good idea to back  
up all your data before installing any new hardware in your computer.  
D
Bottom View  
C
A
N
Bottom  
J
K
H
Top  
L
M
Handling precautions/electrostatic discharge protection  
• ST1.2 Series disc drives are fragile. Do not drop or jar the drive. Handle  
the drive only by the edges or by the finger grip area shown in Figure 1.  
Keep the device in the packaging until you are ready to install it and  
between uses to minimize handling damage.  
• It may be necessary to turn off the power to the host product during  
installation. Refer to your product’s user manual for details regarding  
installation and removal of media devices.  
• Do not disassemble the drive. Doing so voids the warranty.  
See the warranty information on page 2.  
• Do not expose the drive to extreme temperatures or humidity conditions.  
• Do not apply pressure, write on, or attach labels to the top or bottom of  
the drive.  
Pin 50  
Pin 1  
CF Dimension Table  
Inches  
Millimeters  
A
B
C
D
E
F
G
H
J
K
L
M
N
0.197 .004  
1.433 .006  
1.685 .004  
5.00 .10  
36.40 .15  
42.80 .10  
1.015 .003 2x 25.78 .07  
1.152 .010  
0.299 .010  
0.394 min  
29.25 .25  
7.61 .25  
10.00 min  
1.60 .05  
0.063 .002  
0.040 .003 2x 1.01 .07  
0.039 .002 1.00 .05  
0.039 .004 2x 1.00 min  
0.065 .004 1.65 .10  
0.243 .004 2x 6.16 .10  
• Do not cover or otherwise obstruct the breather hole on the top of the  
• Keep the drive away from strong magnetic fields to avoid data loss.  
Figure 2  
ST1.2 Series, CF+ dimensions—end, top, and side views  
Installing your ST1.2 Series Flex interface model disc drive  
Follow installation instructions for media devices provided in your product’s  
user manual to determine if your Seagate ST1.2 Series disc drive is com-  
patible. See Figure 3 for drive dimensions. Follow all handling precautions/  
electrostatic discharge protection suggestions when installing any drive.  
Finger  
Grip Area  
Follow the precaution when installing and removing your ST1.2 Series Flex  
interface disc drive:  
• Drive electronics are extremely sensitive to static electricity. Caution  
should be exercised when handling any electronic device. Wear an Elec-  
trostatic Discharge (ESD) ground strap when integrating the flex cable  
into host systems. Improper handling may cause ESD damage to the  
ST1.2 Series disc drive’s electronics.  
• Do not bend the cable sharply as this may cause the electrical traces to  
• When the drive is powered on, do not physically remove the flex cable  
from the host connector. Power down the system first before removing  
the drive  
S1.2 CF interface drive  
S1.2 FX interface drive  
Figure 1  
ST1.2 Series—Finger grip areas  
Drive characteristics  
ST68022CF  
ST66022CF  
ST64022CF  
4.0 Gbytes  
7,999,488  
2 Mbytes  
Formatted capacity  
8.0 Gbytes  
Total number of sectors* 15,625,008  
6.0 Gbytes  
11,719,008  
2 Mbytes  
Cache size  
2 Mbytes  
ST68022FX  
8.0 Gbytes  
ST66022FX  
6.0 Gbytes  
11,719,008  
2 Mbytes  
ST64022FX  
4.0 Gbytes  
7,999,488  
2 Mbytes  
Formatted capacity  
Total number of sectors* 15,625,008  
Cache size 2 Mbytes  
*One sector equals 512 bytes.  
Note. The Seagate ST1.2 Series CompactFlash disc drive is compatible  
with the CF+ and CompactFlash Specification 2.0.  
Note. The Seagate ST1.2 Series Flex interface disc drive is compatible  
with the ATA version 7.  
   

Transcend Information JetFlash TS1GJFT3 User Manual
Sony CDX F7750 User Manual
SanDisk SDUFD2AK 1024 User Manual
SanDisk SDUFD2AH 0512 User Manual
Samsung SGH D500 User Manual
Samsung Internal Hd Ssd Sata3 MZ7PD512Z User Manual
Pioneer DEH 1650 User Manual
Philips AJ7010 User Manual
Panasonic SL PD9 User Manual
Nutrimill smart_juicer User Manual