Sanyo MIRRO PLS 3810 User Manual

User Guide  
MirroTM PLS-3810  
“SANYO” is a registered trademark of SANYO Electric Co., Ltd. and is used under  
license. KYOCERA is a registered trademark of Kyocera Corporation. Kyocera  
manufactures and markets the SANYO wireless line of products. All other  
trademarks are the property of their respective owners.  
Table of Contents  
Looking for something? If you don’t see it in the headings  
listed here, try the Index on page 114.  
Tip  
Introduction  
Your Phone’s Menu  
This User Guide introduces you to wireless service and all the  
features of your new phone. It’s divided into four sections:  
The following table outlines your phone’s main menu structure.  
For more information about using your phone’s menus, see  
Missed Alerts  
History  
Bluetooth  
1: On/Off  
Please refer to the Important Safety Information  
WARNING  
section on page 104 to learn about information that  
will help you safely use your phone. Failure to read  
and follow the Important Safety Information in this  
phone guide may result in serious bodily injury,  
death, or property damage.  
2: Visibility  
3: Add New  
4: Trusted Devices  
5: My Bluetooth Info  
Web  
Some features may depend on services from your carrier or  
require an additional purchase.  
Note  
Messages  
1: Voicemail  
1: Call Voicemail  
3: Reset Indicator  
2: Details  
i
       
2: Send Message  
1: Text Message  
4: Settings & Info  
2: Picture Messaging  
1: Location  
2: Status Bar  
3: Slideshow Interval  
5: Help  
4: Account Info  
3: Text Messages  
4: Picture Messaging  
5: Settings  
My Stuff  
1: Games  
1: Notification  
3: Signature  
2: Callback Number  
4: Preset Messages  
2: Ringers  
3: Screen Savers  
4: Applications  
Contacts  
Photos  
5: (Dynamic – if applicable)  
6: (Others – if applicable)  
1: Camera  
Press the right softkey to view the following options:  
1: Picture Mode  
3: Self-Timer  
2: Zoom  
4: Fun Tools  
Shopping  
5: Image Controls  
7: Review Media  
9: User Settings  
6: CameraSettings  
8: Key Guidance  
Calendar  
Tools  
2: Picture Messaging  
1: Alarm  
3: My Albums  
2: Activate/Self-Service*  
* availability dependent on your service provider  
1: In Phone  
2: Online Albums  
ii  
3: Update Phone*  
2: Volume  
* availability dependent on your service provider  
1: Incoming Ringer  
3: Power Up/Down  
2: Playback Volume  
4: Key Beeps  
4: Voice Services  
3: Ringers  
1: Voice Recognition  
5: Assigned Media  
6: Calculator  
2: Voice Memo  
1: Incoming Calls  
3: Messages  
5: Power Up/Down  
2: Voicemail  
4: Calendar  
4: Keyguard  
5: Text Entry  
7: Countdown  
8: Stopwatch  
1: Input Language  
3: Word Prediction  
5: Word Scan  
2: My Words  
9: World Clock  
4: Word Completion  
6: Word Choice List  
8: Help  
Settings  
7: Auto-Complete  
1: Display  
1: Screensaver  
6: Phone Info  
1: Phone#/User ID  
3: Icon Glossary  
5: Advanced  
2: Memory Status  
4: Version  
2: Brightness  
3: Backlight  
7: Lock Phone  
4: Picture ID  
1: Lock Now  
2: Change Lock Code  
3: Lock Code Hint  
5: Power Save Mode  
6: Clock/Calendar  
7: Greeting  
8: Parental Controls  
iii  
7: Language  
1: English  
9: Reset/Delete  
2: Español  
1: Reset Settings  
2: Reset Phone  
3: Reset Picture Messaging 4: Delete Stuff  
5: Change Lock Code  
8: Location  
9: Roaming  
0: Others  
1: Set Mode  
3: Data Roam Guard  
2: Call Guard  
1: Accessibility  
1: Voice Services  
3: Font Size  
2: TTY  
4: Vibrate Type  
0: Navigation Keys  
5: Hearing Aid  
1: Left Navigation  
(Calendar)  
3: Up Navigation  
(Text Message)  
2: Right Navigation  
(Web)  
4: Down Navigation  
2: Airplane Mode  
3: Alerts  
(My Stuff)  
In Use Menu  
1: Beep Each Minute 2: Out of Service  
3: Connect  
Press OPTIONS (right softkey) to display the following  
options:  
4: Call Setup  
1: Abbrev. Dial  
3: Auto-Answer  
2: Call Answer  
1: Save/Contact Details 2: Main Menu  
3: 3-Way Call  
4: Contacts  
5: Voice Memo  
6: Phone Info  
5: Web  
1: Web On/Web Off  
2: Net Guard  
3: Update Data Profile*  
*availability dependent on your service provider  
6: Headset Mode  
1: Normal  
2: Headset Only  
iv  
Section 1  
Getting Started  
   
1A. Setting Up Service  
2. Press  
to turn the phone on.  
If your phone is activated, it will turn on, search for service,  
and enter standby mode.  
If your phone is not yet activated, see “Activating Your  
3. Make your first call.  
Use your keypad to enter a phone number.  
Setting Up Your Phone  
Press  
.
1. Install the battery.  
Insert the battery into the opening on the back of the  
phone, making sure the connectors align ( ), and gently  
press it down ( ).  
Your phone’s battery should have enough charge for your  
phone to turn on and find a signal, set up your voicemail,  
and make a call. You should fully charge your battery as  
for details.  
Note  
Position the battery cover and slide it upward until it snaps  
into place ( ).  
2
       
Activating Your Phone  
Setting Up Your Voicemail  
If you purchased your phone at a store, it is probably activated  
and ready to use.  
Your phone automatically transfers all unanswered calls to your  
voicemail, even if your phone is in use or turned off. You should  
set up your voicemail and personal greeting as soon as your  
phone is activated.  
If you received your phone in the mail, your phone is designed  
to activate automatically when you first turn it on. To confirm  
your activation, make a phone call.  
1. From standby mode, press and hold  
.
If you received your phone in the mail and you are switching  
numbers from a previous phone to the new phone, you need  
to contact your service provider to activate the number on your  
new phone. When you have finished, make a phone call to  
confirm your activation.  
2. Follow the system prompts to:  
Create your passcode.  
Record your name announcement.  
Record your greeting.  
Do not press END while the phone is being activated.  
Pressing END cancels the activation process.  
Tip  
Voicemail Passcode  
Note  
It is strongly recommended that you create a passcode  
when setting up your voicemail to protect against  
unauthorized access. Without a passcode, anyone who has  
access to your handset is able to access your voicemail  
messages.  
If you are having difficulty with activation, contact your  
wireless service provider.  
Note  
For more information about using your voicemail, see “Voicemail”  
3
       
Getting Help  
Directory Assistance  
Call Directory Assistance from your phone and you’ll have access  
to a variety of services and information including residential,  
business, and government listings. There is a per-call charge to  
use Directory Assistance, and you will be billed for airtime.  
Press  
.
Operator Services  
Operator Services provide assistance when placing collect calls or  
when placing calls billed to a local telephone calling card or third  
party.  
Press  
.
For more information, please contact your wireless service  
provider.  
4
     
Section 2  
Your Phone  
   
Your Phone  
2A. Phone Basics  
1. Earpiece  
2. Main Screen  
13. Softkeys  
12. Headset Jack  
11. Navigation Key  
3. MENU/OK Key  
4. Camera Key  
10. BACK Key  
9. SPEAKER Key  
8. END/POWER Key  
MENU  
OK  
5. TALK Key  
ABC  
DEF  
MNO  
WXYZ  
1
4
7
2
5
8
0
3
6
9
GHI  
JKL  
15. Outer Screen  
14. LED Indicator  
PQRS  
TUV  
7. Keypad  
6. Microphone  
16. Speaker  
19. Micro-USB Connector  
17. Camera Lens  
18. Battery  
Release Slot  
20. Volume Button  
21. Side Camera Button  
22. Internal Antenna  
6
     
9. SPEAKER Key lets you place or receive voice calls and  
activate ASR in speakerphone mode, or turn the  
speakerphone mode on or off during a call.  
Key Functions  
1. Earpiece lets you hear the caller and automated prompts.  
2. Main Screen displays all the information needed to operate  
your phone, such as the call status, the Contacts list, the  
date and time, and the signal and battery strength.  
10. BACK Key deletes characters from the display in text input  
mode. When in a menu, pressing it returns you to the  
previous menu. This key also allows you to return to the  
previous screen in a Web session.  
3. MENU/OK Key lets you access the phone’s menus and select  
the highlighted choice when navigating through a menu.  
11. Navigation Key scrolls through the phone’s menu options  
and acts as a shortcut key from standby mode. These keys  
can be reassigned to create customized shortcuts. (See  
4. Camera Key lets you access the Photos menu. Press and  
hold to activate the camera mode and take pictures.  
5. TALK Key allows you to place or receive calls, answer Call  
Waiting, use 3-Way Calling, or activate Automatic Speech  
Recognition (ASR).  
12. Headset Jack allows you to plug in an optional headset for  
convenient, hands-free conversations. CAUTION! Inserting  
an accessory into the incorrect jack may damage the phone.  
6. Microphone allows other callers to hear you clearly when  
you are speaking to them.  
13. Softkeys let you select softkey actions or menu items  
corresponding to the bottom left and right lines on the main  
screen.  
7. Keypad lets you enter numbers, letters and characters and  
navigate within menus. You can use the numeric keypad for  
speed dialing. (See “Speed Dialing” on page 20.)  
14. LED Indicator shows the status of your phone and charging  
at a glance.  
8. END/POWER Key lets you turn the phone on or off, end a  
call, or cancel your input and return to idle mode (standby  
mode or service search mode).  
15. Outer Screen lets you monitor the phone’s status and see  
who is calling without opening the phone.  
7
16. Speaker lets you hear the different ringers and sounds. You  
Viewing the Display Screen  
can mute the ringer when receiving incoming calls by  
pressing  
or the side camera button.  
The status bar at the top of your phone’s display screen provides  
information about your phone’s status and options. These tables  
identify the major symbols you’ll see on the status bar or other  
positions of your phone’s display screen.  
17. Camera Lens, as part of the built-in camera, lets you take  
pictures.  
18. Battery Release Slot lets you open the battery cover to  
replace the battery.  
To view a list of your phone’s icons and descriptions, press  
MENU/OK > Settings > Phone Info > Icon Glossary.  
Tip  
19. Micro-USB Connector allows you to connect a compatible  
charging cable or USB data cable (not included). CAUTION!  
Inserting an accessory into the incorrect jack may damage  
the phone.  
Service Icons  
Signal Strength – Your phone’s current signal strength.   
(More bars = stronger signal.)  
20. Volume Button allows you to adjust the ringer volume  
whenever your phone is turned on or adjust the voice volume  
during a call.  
No Service – Your phone cannot find a usable signal.  
21. Side Camera Button lets you open the Photos menu when  
the phone is open. This button also allows you to mute the  
ringer when receiving incoming calls.  
Roaming – Your phone is “roaming” off the home network.  
Web Service – 1xRTT Web service is available. When active, the  
icon is animated.  
22. Internal Antenna facilitates reception and transmission. To  
maximize performance, do not obstruct the internal antenna  
Web Service Dormant – Web service is currently dormant.  
Web Service Unavailable – Web service is currently unavailable.  
8
   
Status Icons  
Messaging Icons  
Battery – Your phone’s current battery charge level. (The icon to the  
left shows the battery is fully charged.) The icon is animated while the  
battery is charging.  
Multiple Messages – You have two or more different types of new  
messages waiting.  
Picture Messages – You have one or more new picture messages  
waiting.  
Location On – Your phone’s location feature is on and available for  
location-based services such as GPS Navigation.  
Text Messages – You have one or more new text messages waiting.  
Location Off – Your phone’s location feature is off. Your location is  
available only for 911.  
Voicemail – You have one or more new voicemail messages waiting.  
Silence All – Your phone’s sound is turned off.  
Urgent Messages – You have one or more new urgent messages  
waiting.  
Vibrate All – Your phone’s sound is turned off but vibrate is turned  
on.  
Ringer Off – Your phone’s ringer is turned off.  
Bluetooth Icons  
1 Beep – A beep sounds when you receive an incoming call, a  
message, etc.  
Visible – Your phone is discoverable by (visible to) other Bluetooth  
devices.  
1 Beep and Vibrate – 1 Beep and vibrate are set.  
Connected – Your phone is connected to a Bluetooth device.  
Ringer and Vibrate – The volume level is set to between 1 and 8  
and vibrate is turned on.  
Enable – Your phone’s Bluetooth feature is enabled.  
Speaker Mode – Your phone is in speaker mode.  
*
The above icons will blink while your phone is communicating with a  
Bluetooth device.  
9
Turning Your Phone On and Off  
Voice Call Icons  
Missed Call – You have one or more missed voice calls.  
Turning Your Phone On  
Press and hold  
.
Bluetooth Device – A call is in progress using a Bluetooth device.  
Headset – A call is in progress using an optional wired headset.  
Car Kit – A call is in progress using an optional car kit device.  
Once your phone is on and finds a signal, it automatically enters  
standby mode – the phone’s idle state. At this point, you are  
ready to begin making and receiving calls.  
If your phone is unable to find a signal after 15 minutes of  
searching, a Power Save feature is automatically activated. When  
a signal is found, your phone automatically returns to standby  
mode.  
Others  
In Power Save mode, your phone searches for a signal  
periodically without your intervention. You can also initiate a  
search for service by pressing any key except numbered keys.  
TTY – Your phone is connected to a TTY device.  
Alarm – An alarm or countdown is set.  
The Power Save feature conserves your battery power  
when you are in an area where there is no signal.  
Tip  
Notification – You have events, alarms, or countdown notifications.  
HAC Enabled – Your phone’s HAC setting is enabled.  
10  
   
For a quick check of your battery level, glance at the battery  
charge indicator located in the upper right corner of your phone’s  
display screen. When there are approximately five minutes of talk  
time left, the battery icon ( ) turns red and the phone sounds a  
warning tone.  
Turning Your Phone Off  
Press and hold  
for two seconds until you see the  
powering-down animation on the display screen.  
Your screen remains blank while your phone is off unless the  
battery is charging.  
After an additional five minutes or so, the phone sounds a  
warning tone three times and then turns off.  
Battery and Charger  
Long backlight settings, searching for service, vibrate  
mode, browser use, and other variables may reduce the  
battery’s talk and standby times.  
Note  
Use only Kyocera-approved batteries and chargers  
with your phone. The failure to use a Kyocera-  
approved battery and charger may increase the risk  
that your phone will overheat, catch fire, or explode,  
resulting in serious bodily injury, death, or property  
damage.  
WARNING  
Watch your phone’s battery level indicator and charge the  
battery before it runs out of power.  
Tip  
Installing the Battery  
Battery Capacity  
Your phone is equipped with a Lithium Ion (Li-Ion) battery. It  
allows you to recharge your battery before it is fully drained. The  
battery provides up to 5.8 hours of continuous digital talk time.  
11  
   
Removing the Battery  
Charging the Battery  
Keeping track of your battery’s charge is important. If your battery  
level becomes too low, your phone automatically turns off, and  
you will lose any information you were just working on.  
1. Make sure the power is off so that you don’t lose any stored  
numbers or messages.  
2. To open, insert a fingernail into the slot ( ), and apply light  
pressure while sliding the cover down ( ).  
Always use a Kyocera-approved desktop charger, travel charger,  
or vehicle power adapter to charge your battery.  
3. Lift the battery up and remove it from the phone ( ).  
1. Plug the phone charger into an electrical outlet.  
Do not handle a damaged or leaking Li-Ion battery  
as you can be burned.  
WARNING  
2. Plug the other end of the phone charger into the micro-USB  
connector located on the upper left side of your phone.  
With the Kyocera-approved Li-Ion battery, you can recharge the  
battery before it becomes completely run down.  
Navigating Through the Menus  
The navigation key on your phone lets you scroll through menus  
quickly and easily. Many menus feature a scroll bar on the right to  
help you keep track of your position in the menu.  
To navigate through a menu, press the navigation key up or down.  
For a diagram of your phone’s menu, please see “Your Phone’s  
12  
         
Selecting Menu Items  
Displaying Your Phone Number  
As you navigate through the menu, menu options are highlighted.  
Select any option by highlighting it and pressing  
is numbered, you can select it by pressing the corresponding  
number on the phone’s keypad.  
. If the option  
Press  
> Settings > Phone Info > Phone#/User ID.  
Your phone number and other information about your phone and  
account will be displayed.  
For example, to open the alarm setting screen:  
1. Press  
to access the main menu.  
Setting the Keyguard  
2. Select Tools by highlighting it and pressing  
.
To avoid accidentally pressing a side button, this feature enables  
you to lock side buttons while the phone is closed.  
3. Select Alarm by highlighting it and pressing  
.
For the purposes of this guide, the above steps condense into:  
Press > Tools > Alarm.  
1. Press  
2. Select On or Off.  
You can deactivate this feature temporarily by opening the  
> Settings > Keyguard.  
Backing Up Within a Menu  
Tip  
phone, or by pressing and holding the side camera button  
while the phone is closed.  
Press  
Press  
to go to the previous menu.  
to return to standby mode.  
Side buttons will be temporarily unlocked, for example, when:  
Receiving a call.  
Talking on a call.  
Receiving voicemail, messages, or calendar or alarm  
notifications.  
13  
       
JAVA or Camera is activated.  
Making Calls  
Making an emergency call or in emergency mode.  
1. Make sure your phone is on.  
If you select Icon Only under Messages > Settings >  
Notification, notifications will not unlock side buttons. (See  
Note  
2. Enter a phone number from standby mode. If you make a  
mistake while dialing, press  
3. Press  
to erase the numbers.  
. (To make a call when you are roaming and Call  
Making and Answering Calls  
4. Press  
or close the phone when you are finished.  
Holding Your Phone  
To maximize performance, do not obstruct the internal antenna  
area.  
If the Parental Controls feature is on and Voice Calls are  
restricted, you can only place calls to or receive calls from a  
limited set of phone numbers. (See page 39.)  
Note  
To redial your last outgoing call, press TALK, highlight the  
call, and then press TALK again.  
Tip  
Correct  
Incorrect  
When making calls off the home network, always dial using  
11 digits (1 + area code + phone number).  
You can also place calls from your phone by speed dialing  
by using your History listings (page 45).  
Internal Antenna  
14  
         
phone or pressing other keys. See “Call Answer Mode” on  
Dialing Options  
When you enter numbers in standby mode, you can see available  
dialing options by pressing OPTIONS (right softkey). To select an  
option, highlight it and press  
Your phone notifies you of incoming calls in the following ways:  
The phone rings or vibrates.  
.
The indicator light flashes.  
Save to save a phone number in your Contacts. (See “Saving a  
The backlight illuminates.  
Contact Details to view the detailed information of a Contacts  
entry when the number you have entered is already saved in  
your Contacts.  
The screen displays an incoming call message.  
If the incoming call is from a number stored in your Contacts, the  
entry’s name is displayed. The caller’s phone number may also be  
displayed, if available.  
Hard Pause to insert a hard pause. (See “Dialing and Saving  
For other actions when receiving a call, you can select an  
onscreen menu or press a key:  
Press  
to answer the call in speaker mode.  
You can also send a text message or picture message  
when the left softkey displays SEND MESSAGE.  
Tip  
Answer to answer the call.  
When connecting via Bluetooth, select Answer with  
<Bluetooth device name> or Answer with Phone to answer a  
call with your selected device.  
Answering Calls  
1. Make sure your phone is on. (If your phone is off, incoming  
calls go to voicemail.)  
Silence to mute the ringer and stop the vibration. Pressing  
or the side camera button has the same effect.  
2. Press  
to answer an incoming call. (Depending on your  
settings, you may also answer incoming calls by opening the  
Send to Voicemail to ignore the call and transfer it to your  
voicemail.  
15  
     
Ignore with Text to ignore the call and send a text message to  
the caller.  
To display a Missed Alerts entry from standby mode:  
1. Press > Missed Alerts.  
Press  
to ignore the call.  
2. Highlight the entry you wish to view and press  
Calling Emergency Numbers  
You can always place calls to 911 (dial  
.
Ignore with Text may not be displayed when calls are from  
entries identified as No Caller ID, Private (Restricted ID), or  
Unavailable ID.  
Note  
),  
even if your phone is locked or your account is restricted.  
Answering a Roam Call With Call Guard Enabled  
During an emergency call, press OPTIONS (right softkey) to  
Call Guard is an option that helps you manage your roaming  
charges when making or receiving calls while outside the home  
about roaming.  
display your options. Highlight an option and press  
.
Transfer Audio to switch the call to a Bluetooth device (if  
applicable).  
Contacts to display your Contacts list.  
Press  
, and then press  
to answer the call. (See  
“Call Guard” on page 92 for additional information.)  
Voice Memo to record the other party’s voice.  
Phone Info to display your Phone Info menu.  
Ending a Call  
Press MY PHONE# (left softkey) to display your phone  
Tip  
Press  
.
number during an emergency call.  
Missed Call Notification  
When an incoming call is not answered, your screen displays the  
Exiting Emergency Mode  
If you end the emergency call by pressing  
Emergency mode. Press  
, your phone enters  
to exit Emergency mode.  
Missed Call log. Press  
to dial the phone number.  
16  
     
Contact Details to display information about the caller stored in  
your Contacts.  
Enhanced 911 (E911) Information  
This phone features an embedded Global Positioning System  
(GPS) chip necessary for utilizing E911 emergency location  
services where available.  
Main Menu to display the phone’s main menu.  
3-Way Call to open a call with two other parties.  
Contacts to display your Contacts list.  
When you place an emergency 911 call, the GPS feature of your  
phone seeks information to calculate your approximate location.  
Depending on several variables, including availability and access  
to satellite signals, it may take up to 30 seconds or more to  
determine and report your approximate location.  
Voice Memo to record the other party’s voice.  
Phone Info to display information about your phone.  
Additional in-call options can be accessed by pressing the  
following keys or buttons during a call.  
Always report your location to the 911 operator  
when placing an emergency call. Some  
designated emergency call takers, known as Public  
Safety Answering Points (PSAPs) may not be  
equipped to receive GPS location information from  
your phone.  
Important  
Press the volume button to adjust the receiver volume.  
Press MUTE or UNMUTE (left softkey) to switch between the  
mute or unmute mode. (Muting applies to your voice, not the  
other party’s.)  
Press  
to turn the speaker on. Press again to turn it off.  
In-Call Options  
Pressing OPTIONS (right softkey) during a call displays a list of  
Because of higher volume levels, do not place the  
phone near your ear during speakerphone use.  
WARNING  
available in-call features.  
Transfer Audio to switch the call to a Bluetooth device (if  
applicable).  
Save to save the current call’s phone number in your Contacts.  
17  
 
End-of-Call Options  
Saving a Phone Number  
After you have finished your call, the phone will display an end-of-  
call message. “Call ended” and the duration of the call will  
alternately flash beneath the caller’s name (if already in your  
Contacts) or the caller’s number (if available). Press any key below  
to select an option; press any other key to stop the end-of-call  
display.  
Your phone can store up to 300 Contacts entries and each entry  
can contain up to seven phone numbers. (See section 2D,  
1. From standby mode, enter a phone number and press  
OPTIONS (right softkey) > Save. (If this is the first time you  
are saving an entry to Contacts, skip to step 3.)  
Press  
to call a highlighted entry.  
2. Select New Entry or Existing Entry.  
Press  
to display all history for a highlighted entry.  
3. If you chose New Entry, select a number type, and then  
enter the new entry name.  
Press OPTIONS (right softkey) to display the Recent History  
– or –  
Press SEND MESSAGE (left softkey) to send a text or picture  
If you chose Existing Entry, select an entry to which you  
message.  
want to save the number, and then highlight a number type  
Press  
to return to standby mode.  
and press  
.
Press  
or simply wait 10 seconds to return to where you  
4. Press DONE (left softkey) to save the entry.  
were before the call (if applicable).  
If you press a key other than one of those above, the Recent  
History screen is displayed. (See “Viewing History” on page 43.)  
18  
   
Finding a Phone Number  
You can search Contacts entries for phone numbers that contain a  
specific string of numbers.  
You can have multiple pauses in a phone number and  
combine two-second and hard pauses.  
Note  
To dial or save phone numbers with pauses:  
1. Enter four or more digits of the number in standby mode.  
(The more numbers you enter, the more specific the search  
becomes.)  
1. Enter all or part of a number.  
2. Press OPTIONS (right softkey) > Hard Pause or   
2-Sec. Pause.  
2. All Contacts entries matching the entered numbers will be  
3. Enter additional numbers.  
displayed. Highlight an entry and press  
number.  
to dial the  
4. Press OPTIONS (right softkey) > Save > New Entry or  
Existing Entry to save the number in your Contacts. (See  
Dialing and Saving Phone Numbers With  
Pauses  
– or –  
You can dial or save phone numbers with pauses for use with  
automated systems, such as voicemail or credit card billing  
numbers.  
Press  
to dial the number.  
5. Press  
Hard Pause in step 2.  
to send the additional number if you selected  
There are two types of pauses available on your phone:  
Hard Pause sends the next set of numbers when you   
press  
.
2-Sec. Pause automatically sends the next set of numbers after  
two seconds.  
19  
       
Dialing From the Contacts List  
Speed Dialing  
You can store up to 98 numbers in your phone’s speed dial  
memory to make contacting friends and family easier.  
1. From standby mode, press CONTACTS (right softkey).  
2. Highlight the entry you want to call.  
You must assign a speed dial number to the existing phone  
3. Press  
to dial the entry’s default phone number.  
– or –  
Press the navigation key left or right to show another number  
To use speed dial for locations 2-9:  
for the entry and press  
.
From standby mode, press and hold the appropriate key for  
approximately two seconds.  
Plus (+) Code Dialing  
To use speed dial for locations 10-99:  
From standby mode, press appropriate keys, and then   
When placing international calls, use Plus Code Dialing to  
automatically enter the international access code for your  
location. (This feature is subject to network availability.)  
press  
.
1. Press and hold  
2. Dial the country code and phone number you’re calling, and  
press . The access code for international dialing will  
automatically be dialed, followed by the country code and  
phone number.  
to display “+” on your phone screen.  
The display confirms that the number has been dialed when it  
shows “Connecting...”.  
Speed dialing may not be available when you are roaming;  
when you are roaming off the home network, you must  
always dial using 11 digits (1+ area code + number).  
Note  
20  
             
Abbreviated Dialing  
Abbreviated Dialing is similar to speed dialing. You can use either  
of the following abbreviated dialing features.  
Contacts Match will not retrieve numbers if you enter 911  
or reserved three-digit service numbers such as 411 or  
711.  
Note  
2. Press  
to call the displayed number.  
Contacts Match – Retrieve any number saved in your Contacts  
by entering the four or more digits of any part of the number.  
If there are two or more matched numbers in your Contacts,  
a list is displayed. Highlight the name or the phone number  
Prepend – Prepend the first five or six digits (for example, the  
area code and prefix) to any four or five digits you enter.  
you want to call, and then press  
to place a call.  
To activate the Prepend feature:  
Entering Text  
1. Press  
> Settings > Others > Call Setup >  
Abbrev. Dial.  
Selecting a Text Input Mode  
2. Select Prepend > On.  
Your phone provides convenient ways to enter words or symbols  
whenever you are prompted to enter text.  
3. Enter a five- or six-digit number and press  
To place a call using Abbreviated Dialing:  
.
1. Press OPTIONS (right softkey) > Text Mode on the message  
entry screen.  
1. Enter the four or more digits of any part of a Contacts entry’s  
phone number to use the Contacts Match feature.  
– or –  
– or –  
Press TEXT MODE... (right softkey) from other text input  
Enter the last four or five digits of the number to use the  
Prepend feature.  
screens, such as Contacts or Signature.  
21  
         
2. Select one of the following options:  
Delete All to delete all text (if applicable).  
Select Text to select text for copying or cutting (if  
applicable).  
If you see a triangle to the right of a menu option, you can  
switch between related menus by pressing the navigation  
key right or left.  
Tip  
Add Word to store words that you frequently use.  
Text Settings to display the Text Entry settings menu.  
ABC to use multi-tap entry – press  
once for “a,” twice  
for “b,” or three times for “c.” (See page 23.)  
When entering text, press * (Shift) to change the  
capitalization style as Predictive > PREDICTIVE >  
predictive (Predictive mode), or as Abc > ABC > abc (ABC  
mode). The selected style is displayed in the bottom-right  
corner of the screen, above the right softkey label (if  
applicable).  
Tip  
Predictive to enter text using a predictive text input system  
that reduces the number of keypresses required while  
entering a word. (See page 24.)  
Number to enter numbers.  
Symbols to enter symbols.  
Smileys to enter smile icons.  
Text Entry Settings  
Emoticons to enter “emoticons.” (This is available, for  
example, when composing a message, or when editing a  
Schedule or To Do description in Calendar.)  
1. Press OPTIONS (right softkey) > Text Mode > Text Settings  
on the message entry screen.  
– or –  
Web Shortcut to enter Web shortcuts (for example, www.,  
http://, or .com).  
Press TEXT MODE... (right softkey) > Text Settings from  
other text input screens.  
Paste List to paste copied or cut text (if applicable).  
– or –  
Select Language to select the language (English or  
Spanish).  
From standby mode, press  
> Settings > Text Entry.  
22  
2. Highlight an option and press  
Input Language to select the language (English or Spanish).  
.
ABC Input Mode  
In the ABC input mode, also known as multi-tap entry, you press  
keys one, two, three, or four times to enter the letters you see on  
the keypad. For example, press  
or three times for “c”; or press  
My Words to edit or delete custom words you have added  
to the predictive text database.  
once for “a,” twice for “b,”  
once for “p,” twice for “q,”  
Add Word to store words that you frequently use.  
three times for “r,” or four times for “s.”  
Word Prediction to automatically display the word that may  
follow the current text input.  
1. Select the ABC input mode. (See page 21.)  
Word Completion to suggest possible words based on  
letters you have entered when the Predictive Text input  
mode is turned on (see page 21).  
2. Press the corresponding keys repeatedly until the correct  
letter appears. (For example, to enter the word “Bill,” press  
twice,  
three times again.) (If you make a mistake, press  
a single character. Press and hold to erase an entire word.)  
three times,  
three times, and  
Word Scan to allow the predictive text input system to suggest  
words it finds in Contacts and messages.  
to erase  
Word Choice List to display the word choice list.  
By default, the first letter of an entry is capitalized and the  
following letters are lowercased. After a character is entered, the  
cursor automatically advances to the next space after two  
seconds or when you enter a character on a different key.  
Auto-Complete to show completed words or phrases that  
match partial words or phrases you have entered  
regardless of whether the ABC input mode or the Predictive  
Text input mode is turned on.  
Help to view the Predictive Text instructions.  
23  
 
Adding a Word to the Predictive Text Database  
Predictive Text Input  
If a word you want to enter is not displayed as an option while you  
are in the Predictive Text input mode, add it to the database.  
Predictive Text input, also known as T9 Text Input, lets you enter  
text by pressing keys just once per letter. (To select the Predictive  
Text input mode when entering text, see page 21.)  
1. While you are in the Predictive Text input mode, select   
<Add Word> in a word choice list.  
Predictive Text input uses an intuitive word database to analyze  
the letters you enter and create a suitable word. (The word may  
change as you type.)  
– or –  
Press OPTIONS (right softkey) > Text Mode > Add Word on  
1. Select the Predictive Text input mode.  
the message entry screen.  
– or –  
2. Press the corresponding keys once per letter to enter a  
word. A word choice list opens and shows words starting  
with the letters you have entered thus far. (For example, to  
Press TEXT MODE... (right softkey) > Add Word from other  
text input screens.  
enter the word “Bill,” press  
make a mistake, press  
.) (If you  
to erase a single character.  
2. Enter a word and press SAVE (left softkey). The word will  
appear as an option the next time you scroll through options  
during the Predictive Text input mode.  
Press and hold  
to erase an entire word.)  
If the word you want is not displayed after you have entered all the  
letters, press the navigation key down to scroll through additional  
word selections. To accept a word and insert a space, press  
or  
.
24  
 
To edit or delete the words you have added:  
Simple Data Exchange  
1. Press OPTIONS (right softkey) > Text Mode > Text Settings >  
My Words on the message entry screen.  
This feature makes it easy to select certain information from a text  
or picture message and automatically save it or use it in a related  
application.  
– or –  
Press TEXT MODE... (right softkey) > Text Settings >   
My Words from other text input screens.  
Simple Data Exchange works with these types of information:  
Email addresses  
– or –  
From standby mode, press  
> Settings > Text Entry >  
Street addresses  
My Words.  
Phone numbers  
2. Highlight a word and press OPTIONS (right softkey).  
3. Highlight an option and press  
Edit to edit a word in My Words. When finished, press SAVE  
(left softkey) to save your changes.  
Web addresses (URLs)  
.
Email Address Options  
Highlight an email address (or a saved Contacts entry name  
in the From/To field in the message details screen), press  
, and select an option:  
Delete to delete a word in My Words. Press YES (left  
softkey) to confirm the deletion.  
Send Message to select Text Message or Picture Messaging.  
The selected messaging application will open and the email  
address will appear as the message’s recipient.  
For more information about Predictive Text (T9), visit the Nuance  
website at http://www.nuance.com/t9/textinput/.  
Share to select Text Message. The selected application will  
open and the email address will appear in the message  
body.  
25  
   
Save to Contacts to save the email address in Contacts.  
Save to Contacts to save the phone number in Contacts.  
Contact Details to display the Contacts entry if the email  
address is already saved in Contacts.  
Contact Details to display the Contacts entry if the phone  
number is already saved in Contacts.  
Street Address Options  
Web Address (URL) Options  
Highlight a street address, press  
, and select an option:  
Highlight a Web address (URL), press  
option:  
, and select an  
Share to select Text Message. The selected application will  
open and the address will appear in the message body.  
Browse to open the browser to the Web page.  
Save to Contacts to save the address in Contacts.  
Share to select Text Message. The selected application will  
open and the Web address will appear in the message  
body.  
Phone Number Options  
Save to Contacts to save the Web address in Contacts.  
Highlight a phone number (or a saved Contacts entry name  
in the From/To field in the message details screen), press  
, and select an option:  
Call to call the phone number.  
Prepend to prepend a number to the phone number.  
Send Message to select Text Message or Picture Messaging.  
The selected messaging application will open and the  
phone number will appear in the To: field.  
Share to select Text Message. The selected application will  
open and the phone number will appear in the message  
body.  
26  
Display Settings  
2B. Settings  
Changing the Screen Saver  
You can set a screen saver to display while in standby mode.  
1. Press  
> Settings > Display > Screensaver.  
2. Select a screen saver option by pressing the navigation key  
up or down, and select a screen saver.  
3. Press  
.
Changing the Brightness  
You can adjust the brightness on the main screen. When the  
Power Save Mode is on, and when the Backlight Dim setting is  
Always Dim, you cannot change this setting.  
1. Press  
> Settings > Display > Brightness.  
2. Highlight a brightness level and press  
.
27  
       
If you select Contacts, select All Contacts, or select   
Changing the Backlight Time Length  
Select how long the main screen and keypad remain backlit after  
any keypress is made.  
One Contact and then select an entry.  
3. Select a picture ID option by pressing the navigation key up  
or down, and then select an image.  
Press  
> Settings > Display > Backlight > Backlight Dim  
If you select Take New Picture, press  
4. If you are satisfied with the image on the preview screen,  
press  
to take a picture.  
or Backlight Off.  
If you select Backlight Dim, select Always Bright,   
Always Dim, or a preset length of time to elapse before   
the screen backlight dims.  
.
Power Save Mode  
This feature helps conserve your battery power by automatically  
adjusting settings for certain phone features.  
If you select Backlight Off, select a preset length of time to  
elapse before the screen and keypad backlights turn off.  
(When you select Always Bright for the Backlight Dim  
setting above, the keypad backlight will turn off after about  
one minute.)  
1. Press  
> Settings > Display > Power Save Mode.  
2. Select On. (Select Off to deactivate this feature.)  
Long backlight settings reduce the battery’s talk and  
standby times.  
Note  
3. Read the message and press CONTINUE (left softkey).  
Changing the Clock/Calendar Display  
Choose which design of clock or calendar you want to display in  
standby mode.  
Selecting a Picture ID  
You can select an image as a picture ID.  
1. Press  
> Settings > Display > Clock/Calendar.  
1. Press  
> Settings > Display > Picture ID.  
2. Highlight a display option and press  
.
2. Select Contacts, Unsaved Numbers, or Private / Unknown.  
28  
         
1. Press  
Font Size.  
> Settings > Others > Accessibility >   
Changing the Text Greeting  
The screen displays a text greeting in standby mode. Choose the  
phone’s default greeting (“Sanyo”), or enter your own custom  
greeting.  
2. Highlight Normal Font or Large Font. You can see the  
highlighted font size in the New Size window.  
3. If you are satisfied with the font size, press SAVE (left  
1. Press  
> Settings > Display > Greeting.  
softkey).  
2. Select Default or Custom.  
If you select Custom, enter a custom greeting and press  
Display Language  
You can choose to display your phone’s onscreen menus in  
English or in Spanish.  
Changing the Phone’s Menu Style  
Choose the layout of your phone’s menu.  
1. Press  
> Settings > Others > Language.  
2. Select English or Español.  
1. Press  
to display the main menu.  
2. Press OPTIONS (right softkey) > List View or Grid View.  
Volume Settings  
Changing the Font Size  
Adjust the display and text input font size. This setting does not  
affect all screens.  
Adjusting the Phone’s Volume Settings  
Adjust your phone’s volume settings to suit your needs and your  
environment.  
From the main menu, press OPTIONS (right softkey) >   
Large Font or Normal Font to change the font size.  
1. Press  
> Settings > Volume.  
– or –  
29  
           
2. Select Incoming Ringer, Playback Volume, Power Up/Down,  
or Key Beeps.  
Silence All  
The Silence All option allows you to mute all sounds without  
turning your phone off.  
If you select Power Up/Down, select On or Off.  
If you select Key Beeps, select Tone Volume or Tone Type.  
To activate Silence All:  
3. Select a volume level or type and press  
.
Press and hold the volume button down in standby mode.  
(The screen will display “Silence All.”)  
To change the incoming ringer or playback volume:  
1. Press the volume button up or down for most applications,  
including playing sounds. A volume setting screen is  
displayed.  
To deactivate Silence All:  
Press the volume button up repeatedly to select a volume  
level.  
2. Press the volume button up or down to select the volume  
level, and then press  
or close the phone. (When the  
Ringer Settings  
Ringer and Playback tabs are both displayed, you can switch  
between tabs by pressing the navigation key left or right.  
Ringer Types  
Ringer types help you identify incoming calls and messages. You  
can assign ringer types to individual Contacts entries, types of  
calls, and types of messages.  
You can make the incoming ringer vibrate at any volume  
level by pressing VIBRATE (left softkey) on the volume  
setting screen.  
Tip  
Selecting Ringer Types for Incoming Calls  
1. Press  
> Settings > Ringers > Incoming Calls.  
30  
         
2. Select Contacts, Unsaved Numbers, or Private / Unknown.  
If you select Contacts, select All Contacts, or select   
One Contact and then select an entry.  
Selecting Ringers for Voicemail, Calendar, and  
Power Up/Down  
1. Press  
> Settings > Ringers.  
3. Select a ringer option by pressing the navigation key up or  
down, and then select a ringer. (See “Getting New Ringers”  
on this page if you selected Downloaded > Get New.)  
2. Select Voicemail, Calendar, or Power Up/Down.  
3. Select a ringer option by pressing the navigation key up or  
down, and then select a ringer.  
Selecting Ringers for Messages  
Getting New Ringers  
1. Press  
> Settings > Ringers > Messages.  
A wide variety of new ringers is available from the download  
menus, and you can access them right from your phone.  
(Additional charges may apply, but some are free.)  
2. Select Text Message or Picture Messaging.  
3. Select Contacts, Unsaved Numbers, or Private / Unknown.  
If you select Contacts, select All Contacts, or select   
One Contact and then select an entry.  
1. Press  
> Settings > Ringers.  
2. Select a ringer type category (Incoming Calls, Voicemail,  
Messages, etc.) and any applicable subcategories until you  
arrive at the “Assign?” screen.  
4. Select a ringer option by pressing the navigation key up or  
down, and then select a ringer.  
Ringer types can be assigned from the Contacts menu. See  
Tip  
3. Select Downloaded > Get New. (The Digital Lounge will  
launch and display the Ringers menu.)  
4. Use the navigation key and keypad to search through  
available ringers. When you find one you want, highlight it  
and press  
.
31  
   
5. To purchase the ringer, highlight Buy and press  
(The ringer will download automatically.)  
.   
When the ringer volume is set to Silence All or Vibrate All,  
Voice Guide does not work.  
Note  
6. When the download is finished, select an option to continue:  
Listen to listen to the ringer.  
The voice guide language depends on the language  
selected in MENU/OK > Settings > Others > Language >  
English or Español.  
Set as to assign the ringer to a call or message type or to a  
specific contact.  
Shop to browse for other items to download.  
Selecting Vibration Patterns  
Setting Up Voice Guide  
With this feature, you can select vibration patterns for incoming  
calls, messages, alarms, and scheduled events.  
Voice Guide allows you to hear voice prompts and spoken  
numbers or key names as you press a key, and also to hear  
menus and options, and Contacts names, email addresses,   
URLs, etc., as you highlight each item onscreen. (The default  
setting is Off.)  
1. Press  
> Settings > Others > Accessibility >   
Vibrate Type.  
2. Select Incoming Calls, Voicemail, Messages,   
Alarm/Calendar, or Power Up/Down.  
1. Press  
> Settings > Others > Accessibility >   
Voice Services > Voice Guide.  
3. If you select Messages, select the message type. Otherwise  
skip to step 4.  
2. Select On or Off.  
4. Highlight a vibration pattern and press  
.
32  
   
2. Select My Phone Number, Other, or None. If you select  
Messaging Settings  
Other, enter a callback number and press  
.
Adding a Customized Signature  
Your phone’s advanced messaging capabilities let you send   
and receive many different kinds of messages without placing a  
voice call.  
Add a customized signature to each message you send.  
1. Press > Messages > Settings > Signature.  
Messaging settings allow you to decide how your phone notifies  
you of new messages, create a signature with each sent  
message, and create your own preset messages.  
2. Select On. (If you do not wish to attach a signature to your  
outgoing messages, select Off.)  
3. Enter a signature and press  
.
Setting Message Notification  
When you receive a message, your phone notifies you by  
displaying an icon on your display screen. You can also choose to  
be notified with a message notification on your display screen.  
Press OPTIONS (right softkey) > Add Signature to insert  
your signature on the message entry screen.  
Tip  
Managing Preset Messages  
1. Press  
> Messages > Settings > Notification.  
Your phone is loaded with 20 preset messages to help make  
sending text messages easier. Customize or delete these  
messages, such as “Where are you?,” “Let’s get lunch,” and  
“Meet me at” to suit your needs, or add your own messages to  
the list.  
2. Select Msgs and Icon or Icon Only.  
Text Messaging Settings  
Setting a Callback Number  
To edit or delete a preset message:  
With this feature, you can specify the callback number which your  
recipients see when you send text messages.  
1. Press  
> Messages > Settings > Preset Messages.   
(The list of preset messages will be displayed.)  
1. Press  
> Messages > Settings > Callback Number.  
33  
             
2. To edit or delete a message, highlight it and press OPTIONS  
Turning Location on will allow the network to detect your  
position using GPS technology, making some applications  
and services easier to use. Turning Location off will disable  
the GPS location function for all purposes except 911, but  
will not hide your general location based on the cell site  
serving your call. No application or service may use your  
location without your request or permission. GPS-enhanced  
911 is not available in all areas.  
Note  
(right softkey).  
3. Select Edit, edit the message, and press  
.
– or –  
Select Delete > YES (left softkey) to delete the message.  
(You can also reset all messages by selecting   
Reset all messages > YES [left softkey].)  
To enable your phone’s Location feature:  
1. Press > Settings > Others > Location. (You will see the  
To change the language of the preset message:  
1. Press  
> Messages > Settings > Preset Messages.  
Location disclaimer.)  
2. Press OPTIONS (right softkey) > Select Language.  
2. Read the disclaimer and press  
.
3. Select English or Spanish.  
3. Select On.  
When the Location feature is on, your phone’s standby screen will  
Location Settings  
display the  
icon. When Location is turned off, the  
icon will  
be displayed.  
Your phone is equipped with a Location feature for use in  
connection with location-based services.  
The Location feature allows the network to detect your position.  
Turning Location off will hide your location from everyone   
except 911.  
34  
     
Airplane Mode  
TTY Use  
Airplane Mode allows you to use many of your phone’s features,  
such as games and voice memos, when you are in an airplane or  
in any other area where making or receiving calls or Web  
connections is prohibited. When you set your phone to Airplane  
Mode, it cannot send or receive any calls or access online  
information.  
A TTY (also known as a TDD or Text Telephone) is a  
telecommunications device that allows people who are deaf, hard  
of hearing, or who have speech or language disabilities, to  
communicate by telephone.  
Your phone is compatible with select TTY devices. Please check  
with the manufacturer of your TTY device to ensure that it  
supports digital wireless transmission. Your phone and TTY device  
will connect via a special cable that plugs into your phone’s  
headset jack. If this cable was not provided with your TTY device,  
contact your TTY device manufacturer to purchase the connector  
cable.  
1. Press  
> Settings > Others > Airplane Mode.  
2. Read the disclaimer and press  
.
3. Select an option:  
On to activate Airplane Mode when you select this option.  
Airplane Mode will be deactivated again when you turn the  
phone off.  
When establishing your wireless service, please call your service  
provider via the state Telecommunications Relay Service (TRS) by  
first dialing  
.
Off to deactivate Airplane Mode.  
On Power-up to activate Airplane Mode when you turn the  
phone on. Airplane Mode will remain activated even if you  
turn the phone off and on again.  
To turn TTY Mode on or off:  
1. Press  
> Settings > Others > Accessibility > TTY.   
(You will see an informational message.)  
While in Airplane Mode, your phone’s screen will display   
“Phone Off.”  
2. Press  
.
35  
       
3. Select On to turn TTY mode on.  
– or –  
Using the Hearing Aid Device  
Compatibility Function  
Select Off to turn TTY mode off.  
In TTY Mode, your phone will display the TTY icon if a TTY  
device or an optional headset is connected to your phone.  
Note  
Your phone has been tested for hearing aid device compatibility  
and rated. To use this function effectively, set the hearing aid  
setting to on.  
When enabled, TTY mode may impair the audio quality of  
non-TTY devices connected to the headset jack.  
1. Press  
> Settings > Others > Accessibility >   
Hearing Aid.  
911 Emergency Calling  
WARNING  
2. Read the disclaimer and press  
.
It is recommended that TTY users make emergency  
calls by other means, including Telecommunications  
Relay Services (TRS), analog cellular, and landline  
communications. Wireless TTY calls to 911 may be  
corrupted when received by public safety answering  
points (PSAPs), rendering some communications  
unintelligible. The problem encountered appears  
related to software used by PSAPs. This matter has  
been brought to the attention of the FCC, and the  
wireless industry and the PSAP community are  
currently working to resolve this.  
3. Select On or Off.  
On to use a hearing aid device with your phone.  
Off to use your phone without a hearing aid device.  
For more information about hearing aid device compatibility, see  
36  
     
2. Select Beep Each Minute, Out of Service, or Connect.  
Phone Setup Options  
3. Select On or Off.  
Navigation Key Shortcuts  
My Favorites  
You can use the navigation keys as shortcuts to access specific  
menu items directly from standby mode. You can reassign the  
default shortcuts to the menu items you choose.  
Your phone offers you the option of assigning a shortcut to a  
favorite or often-used function. Pressing FAVORITES (left softkey)  
in standby mode will launch your personally designated shortcut.  
1. Press  
2. Highlight the navigation key you wish to reassign and   
press  
> Settings > Others > Navigation Keys.  
1. Press FAVORITES (left softkey) to display the My Favorites  
list.  
.
2. Select <Add Favorite>.  
3. Using the navigation key or your keypad, select a function.  
3. Using the navigation key or your keypad, select functions to  
be assigned to the My Favorites list.  
4. Press ASSIGN (left softkey) to save. (For options with  
submenu levels, such as Settings, you can assign submenu  
options by navigating to the desired option before pressing  
ASSIGN.)  
4. Press ASSIGN (left softkey) to save.  
While the My Favorites list is displayed, press OPTIONS  
(right softkey) to customize the list or to remove assigned  
functions according to your needs.  
Tip  
Alert Notification  
Set your phone to alert you with an audible tone when you change  
service areas, once a minute during a voice call, or when a call  
has been connected.  
1. Press  
> Settings > Others > Alerts.  
37  
       
Call Answer Mode  
Headset Mode  
Select how to answer incoming calls on your phone whether by  
Set the sound output destination of incoming ringer on your  
phone.  
pressing  
and  
or any key (except softkeys, side buttons,  
), or by opening the phone.  
,   
1. Press  
> Settings > Others > Headset Mode.  
1. Press  
> Settings > Others > Call Setup > Call Answer.  
2. Highlight an option and press  
.
2. Select Talk Key, Any Key, or Flip Open.  
Normal to output incoming ringer sound through headset  
and speaker.  
Auto-Answer Mode  
Set your phone to automatically pick up incoming calls.  
Remember, your phone will answer calls in auto-answer mode  
even if you are not present.  
Headset Only to output the incoming ringer sound only  
through headset.  
Security Settings  
1. Press  
> Settings > Others > Call Setup > Auto-Answer.  
2. Highlight an option and press  
Hands-free to answer calls automatically when the phone  
.
Accessing the Lock Phone Menu  
You must enter your lock code to view the Lock Phone menu.  
is connected to an optional headset or hands-free device.  
1. Press  
> Settings > Lock Phone.  
Speakerphone to answer calls automatically in  
speakerphone mode.  
2. Enter your lock code and press CONTINUE (left softkey).  
3. Highlight the time you would like your phone to wait before  
The first time you access the Lock Phone menu, you will be  
advised to change the default lock code by pressing  
CHANGE (left softkey). Follow steps 4 and 5 in “Changing  
Note  
answering and press  
.
38  
             
3. Select Change Lock Code.  
If you can’t recall your lock code, try using the last four  
digits of your wireless phone number or check your lock  
code hint. (See “Changing the Lock Code,” below.) If this  
doesn’t work, contact your service provider.  
Tip  
4. Enter your new lock code, and then press CONTINUE (left  
softkey).  
5. Re-enter your new lock code, and then press SAVE (left  
softkey).  
Your Phone’s Lock Feature  
Each time you change the lock code, you will be prompted to  
create a lock code hint. Press YES (left softkey) or NO (right  
softkey) when prompted.  
Locking Your Phone  
When your phone is locked, you can only receive incoming calls  
or make calls to 911.  
To display or edit the lock code hint:  
Press  
> Settings > Lock Phone > Lock Code Hint.  
1. Press  
> Settings > Lock Phone.  
Parental Controls  
2. Enter your lock code and press CONTINUE (left softkey).  
This feature allows parents to prevent children from using certain  
functions on the phone.  
3. Select Lock Now.  
Unlocking Your Phone  
Activating Parental Controls  
1. From standby mode, press UNLOCK (left softkey).  
2. Enter your lock code and press CONTINUE (left softkey).  
1. Press  
> Settings > Parental Controls > On/Off > On.  
2. Enter your new code, and then press CONTINUE (left  
softkey).  
Changing the Lock Code  
1. Press  
> Settings > Lock Phone or Reset/Delete.  
3. Re-enter your new code, and then press SAVE (left softkey).  
2. Enter your lock code and press CONTINUE (left softkey).  
39  
             
Repeat the procedure above with each change from Off to On.  
Also, while set to On, a user will be required to enter the current  
code to access the Parental Controls menu.  
5. Select Allowed Contacts > All Contacts or Choose Contacts  
to allow voice calls and text messages to and from all  
Contacts entries or selected Contacts entries.  
If you select Choose Contacts, select <Add Contact>, and  
then choose a member from the list. If you want to remove  
a member from the list, highlight the member and press  
REMOVE (left softkey).  
Changing the Parental Control Code  
1. Press  
> Settings > Parental Controls >   
Change Parental Control Code.  
If you selected On in step 4, you cannot add, edit, and  
delete any Contacts or Group entries.  
Note  
2. Enter your new code, and then press CONTINUE (left  
softkey).  
3. Re-enter your new code, and then press SAVE (left softkey).  
Restricting Web, Camera, and Location Mode  
Restricting Voice Calls and Text Messages  
1. Press  
> Settings > Parental Controls > Restriction.  
1. Press  
> Settings > Parental Controls > Restriction.  
2. Read the message and press CONTINUE (left softkey).  
2. Read the message and press CONTINUE (left softkey).  
3. Select an option:  
Web to prevent using the browser.  
Camera to prevent using the camera.  
3. Select an option:  
Voice Calls to restrict incoming and outgoing voice calls  
except those placed to 911.  
Force Location On to prevent changing the Location setting  
Text Messaging to restrict sending text messages except to  
designated recipients.  
4. Select On.  
4. Select On/Off > On. If you selected Voice Calls in step 3,  
read the message and press OK (left softkey).  
40  
Deleting Phone Content  
Resetting Your Phone and Phone Content  
You can quickly and easily delete all the content that you have  
created or stored in your phone.  
This option lets you clear different types of personal information  
stored on your phone, reset your phone to factory settings, or  
both.  
1. Press  
> Settings > Reset/Delete.  
1. Press  
2. Enter your lock code and press CONTINUE (left softkey).  
3. Highlight an option and press  
> Settings > Reset/Delete.  
2. Enter your lock code and press CONTINUE (left softkey).  
3. Select Delete Stuff.  
.
4. Highlight an option and press  
.
Reset Settings to restore all the factory defaults, including  
ringer types and display settings. Contacts, History,  
Calendar, and Messages are not affected.  
Text Messages to delete all text messages.  
Call Logs to delete all call history from the phone.  
Browser Cookies and Cache to delete all Web cookies and  
all Web cache memory saved in the phone.  
Reset Phone to reset all settings and erase all data on your  
phone.  
Downloaded Content to delete all data downloaded to your  
phone.  
Reset Picture Messaging to reset your authentication ID for  
your picture messaging account.  
Contacts to delete all of your Contacts including speed dial  
numbers saved in your Contacts.  
4. Read the message and press the left softkey   
(RESET SETTINGS, RESET PHONE, or RESET PIC. MSG).  
Voice Memo to delete all voice data and call memos saved  
in the phone.  
My Albums to delete all pictures stored in My Albums.  
All Stuff to delete everything in all the above categories.  
5. Read the message and press DELETE (left softkey).  
41  
   
Security Features for Web Services  
Net Guard  
When you first connect to the Web, the Net Guard will be  
displayed to confirm that you want to connect. The Net Guard  
helps you avoid accidental connections. You can disable the Net  
Guard in the future by selecting Auto-Connect when you see Net  
Guard displayed.  
Enabling Web Services  
Although Web services are disabled on your phone by default, you  
may enable them at any time.  
To enable Web services:  
To change your Net Guard settings:  
1. Press  
> Settings > Others > Web > Web Off.  
Press  
> Settings > Others > Web > Net Guard.  
2. Read the message and press the left softkey to sign in.  
On to activate the Net Guard.  
Disabling Web Services  
Off to deactivate the Net Guard.  
You can disable Web services again without turning off your  
phone; however, you will not have access to all Web services,  
including Web browsing and messaging. Disabling Web services  
will avoid any charges associated with these services. While  
signed out, you can still place or receive phone calls, check  
voicemail, and use other voice services.  
When enabled, Net Guard appears only once as long as you  
have not turned the phone off and on.  
Note  
To disable Web services:  
1. Press  
> Settings > Others > Web > Web On.  
2. Read the disclaimer and press DISABLE (right softkey) to  
sign out.  
42  
       
Each entry contains the phone number (if available) and Contacts  
entry name (if the number is in your Contacts). Duplicate calls  
(calls from the same number) may appear only once on the list.  
2C. History  
1. Press  
> History.  
2. Highlight an entry and press  
.
You can also press TALK from standby mode to  
display your recent calls.  
Shortcut  
Note  
History records only calls that occur while the phone is  
turned on. If a call is received while your phone is turned  
off, it will not be included in history.  
If you return a call from the voicemail menu, it will not be  
included in your phone’s history.  
History Icons  
You can determine if an entry was an incoming, outgoing, or  
missed call from the icons shown below.  
Viewing History  
History is a list of the last 60 phone numbers (or Contacts entries)  
for voice calls you placed, accepted, or missed. History makes  
redialing fast and easy. It is continually updated as new numbers  
or entries are added to the beginning of the list and the oldest  
entries are removed from the bottom of the list.  
– Incoming Call  
– Outgoing Call  
– Missed Call  
43  
         
is also displayed according to the type of call. (See “History  
Options” below.)  
History Thread  
To make a call from the History details screen, press  
.
The History thread screen shows all history for a selected entry.  
To display a History thread:  
History Options  
1. Press  
> History.  
You may see several menu items on the onscreen menu. Press  
OPTIONS (right softkey) for additional options.  
2. Highlight an entry and press  
.
Text messages are included in the History thread.  
Tip  
Call to call the selected entry.  
Send Message to send a message to the selected entry.  
New Group to create a new Group entry.  
History Details  
Contact Details to display information about the entry if it has  
already been saved in your Contacts.  
To display History details:  
1. Press  
> History.  
Save Contact to save a phone number. (See “Saving a Number  
2. Highlight an entry from the list and press  
thread is displayed.  
. The History  
Delete to delete the entry.  
Delete All to delete all History entries. (See “Deleting History”  
3. Highlight an entry and press  
.
The History details screen shows the number type (Mobile, Home,  
etc.), phone number, the caller’s name (if the number is already in  
your Contacts), and date and time of the call. An onscreen menu  
Prepend to add numbers to the beginning of the selected  
number.  
44  
       
4. If New Entry was selected, select a number type, and then  
If the Parental Controls feature is on and Voice Calls or Text  
Messaging is restricted, you cannot use the New Group or  
Save Contact menu. (See page 39.)  
Note  
enter the new entry name.  
– or –  
If Existing Entry was selected, select an existing entry to  
which you want to save the number, and then highlight a  
Making a Call From History  
number type and press  
.
5. Press DONE (left softkey) to save the entry.  
1. Press  
> History.  
2. Highlight an entry and press  
.
Making a New Group Entry From  
History  
You cannot make calls from History entries identified as  
Note  
No Caller ID, Private (Restricted ID), or Unavailable ID.  
You can make and save a new group entry from History.  
Saving a Number From History  
1. Press  
> History > OPTIONS (right softkey) > New Group.  
2. Read the message and press START (left softkey).  
Your phone can store up to 300 Contacts entries, and each  
Contacts entry can store up to a total of seven phone numbers.  
3. Select the check box for each member you wish to add and  
press CONTINUE (left softkey).  
1. Press  
> History.  
Press OPTIONS (right softkey ) > Enter New Address or  
Contacts to enter a new address or a phone number or to  
select an entry from your Contacts.  
Tip  
2. Highlight a History entry and press OPTIONS (right softkey) >  
Save Contact.  
3. Select New Entry or Existing Entry.  
4. Enter a group name and press  
> SAVE (left softkey).  
45  
               
Deleting History  
You can delete individual or all entries in your History.  
1. Press  
> History.  
2. Highlight an entry you wish to delete and press OPTIONS  
(right softkey) > Delete.  
Select Delete All to delete all entries.  
Tip  
3. If you are certain you want to delete one or all entries from  
History, press DELETE (left softkey).  
46  
   
About Contacts  
2D. Contacts  
Your phone can store up to 300 Contacts entries. Each entry can  
contain up to seven phone numbers, three email addresses, and  
one Web address. You can also add Contacts entries to a Group,  
allowing you to send the same text or picture message to up to 25  
Contacts entries at one time.  
If the Parental Controls feature is on and Voice Calls or Text  
Messaging is restricted, you cannot add, edit, or delete  
Contacts entries. (See page 39.)  
Note  
Displaying Contacts Entries  
1. From standby mode, press CONTACTS (right softkey).  
2. Highlight a name to show that entry’s main phone number,  
or highlight a group to show how many members it has.  
Viewing History From Contacts  
You can view the history of a selected Contacts entry from the  
Contacts list.  
Highlight an entry and press OPTIONS (right softkey) >  
Contact History.  
47  
           
After you have saved the number, the new Contacts entry is  
displayed.  
Displaying Contacts Details  
ICE – In Case of Emergency  
Tip  
1. From the Contacts list, highlight an entry and press  
.
To make it easier for emergency personnel to identify  
important contacts, you can list your local emergency  
contacts under “ICE” in your phone’s Contacts list. For  
example, if your mother is your primary emergency contact,  
list her as “ICE–Mom” in your Contacts list. To list more  
than one emergency contact, use “ICE1–___,” “ICE2–  
___,” etc.  
2. Highlight any data field and press  
. Menu options for that  
field will appear, if applicable.  
If you select a group in step 1, entries or phone numbers  
belonging to the group are displayed.  
Note  
Adding a New Contacts Entry  
Editing a Contacts Entry  
1. From standby mode, press CONTACTS (right softkey) >   
Add New... > New Contact.  
1. From the Contacts list, highlight the entry you want to edit  
and press OPTIONS (right softkey) > Edit Contact.  
2. Enter a name for the new entry and press the navigation key  
down.  
2. Select the field you wish to edit, and then add or edit the  
information and press  
.
3. Enter the phone number for the entry and press  
4. Highlight a number type for the entry (Mobile, Home, Work,  
Pager, Fax, or Other) and press  
.
3. Press DONE (left softkey).  
.
5. Add other information (email address, URL, street address,  
etc.).  
6. Press DONE (left softkey).  
48  
         
Creating a Group  
Editing Groups  
You can create a group by assigning Contacts entries as members  
and then naming the new group.  
1. From the Contacts list, highlight the group you want to edit.  
2. Press OPTIONS (right softkey) > Edit Group.  
1. From standby mode, press CONTACTS (right softkey) >   
Add New... > New Group.  
3. Change the group name or the group icon and press  
.
4. Press SAVE (left softkey).  
2. Read the message and press START (left softkey).  
Adding Members to a Group  
3. Highlight an entry you want to add to a group and press  
A check mark will appear in the box next to the selected  
entry.  
.
1. From the Contacts list, highlight the group to which you want  
to add members.  
4. When you have selected all the entries you want to add,  
press CONTINUE (left softkey).  
2. Press OPTIONS (right softkey) > Edit Group >   
Add More.  
Press OPTIONS (right softkey) > Enter New Address or  
Recent History to enter a new phone number or address or  
to select an entry from your history.  
Tip  
3. Read the message and press START (left softkey).  
4. Highlight an entry you want to add and press  
.
5. Repeat step 4 to add additional members.  
5. Enter a name for the new group and press  
.
To change the input text mode, press TEXT MODE... (right  
softkey) with the group name field highlighted.  
6. Press CONTINUE (left softkey) > SAVE (left softkey).  
6. Press SAVE (left softkey).  
49  
       
– or –  
Removing Members From a Group  
Enter the first few letters of an entry’s name. Contacts with  
matching letters are listed. (The more letters you enter, the  
more your search narrows.)  
1. From the Contacts list, highlight the group from which you  
want to remove members.  
2. Press OPTIONS (right softkey) > Edit Group.  
3. To display an entry, highlight it and press  
.
3. Highlight a member and press OPTIONS (right softkey) >  
Remove from Group > YES (left softkey).  
Press the navigation key left or right to display other listed  
entries.  
4. Repeat step 3 to remove additional members.  
4. To dial the entry, highlight the phone number and press  
.
5. Press SAVE (left softkey).  
You can also find a group the same way as above. Press  
MENU/OK to display the members of the group.  
Tip  
Deleting a Contacts Entry or Group  
1. From the Contacts list, highlight an entry or a group you  
Using Contacts Information in Other  
Applications  
want to delete.  
2. Press OPTIONS (right softkey) > Delete Contact or   
Delete Group.  
You can use saved Contacts information in other applications.  
3. Press DELETE (left softkey) or YES (left softkey).  
To copy information into a message:  
1. From the Contacts list, highlight an entry and press  
.
Finding Contacts Entries  
2. Highlight the information you want to copy, such as phone  
numbers, email addresses, URLs, or street addresses, and  
1. From standby mode, press CONTACTS (right softkey).  
press  
.
2. Scroll through all the entries.  
50  
             
3. Select Share.  
To assign a speed dial number to an existing phone number:  
1. From the Contacts list, highlight an entry and press  
4. Select Text Message.  
.
After you select one or more recipients, the text entry screen for  
the type of message specified will open, and the selected text will  
appear in the body of the message.  
2. Highlight a number and press OPTIONS (right softkey) >   
Set Speed Dial.  
3. Highlight an available speed dial location and press  
.
For more information about messaging, see “Text  
Note  
To replace a current assignment, select a location and  
press REPLACE (left softkey).  
Tip  
To check speed dial assignments:  
Assigning Speed Dial Numbers  
From the Contacts list, press OPTIONS (right softkey) >  
Settings > Speed Numbers.  
Your phone can store up to 98 phone numbers in speed dial  
Selecting a Ringer Type for an Entry  
To assign a speed dial number to a new phone number:  
1. Add a phone number to a new or to an existing Contacts  
Assign a ringer type to a Contacts entry so that you can identify  
the caller by the ringer type. (See “Ringer Types” on page 30.)  
2. Highlight the phone number and press OPTIONS (right  
softkey) > Set Speed Dial.  
1. From the Contacts list, highlight an entry and press  
.
2. Select Set Ringers.  
3. Highlight an available speed dial location and press  
4. Press to return to the Contacts menu.  
.
3. Select Incoming Calls, Text Message, or Picture Messaging.  
4. Select Change.  
51  
           
5. Highlight a ringer category and press  
6. Highlight a ringer and press  
.
Secret Contacts Entries  
.
When you make an entry secret and hide it, that entry is not  
displayed in your Contacts. In History, a telephone number is  
displayed but the Contacts entry’s name is not.  
If you select Downloaded > Get New in step 5, you can  
purchase and download new ringers right from your phone.  
Tip  
To make an entry secret:  
From the Contacts list, highlight an entry and press   
OPTIONS (right softkey) > Set as Secret > On.  
Assigning a Picture to an Entry  
To hide or show secret entries:  
Assign a picture to display each time a certain contact calls you.  
1. From the Contacts list, press OPTIONS (right softkey) >  
Settings > Hide Secret or Show Secret.  
1. From the Contacts list, highlight an entry and press  
2. Highlight the icon and press  
3. Select Choose Photo.  
.
2. Enter the four-digit lock code, and then press CONTINUE (left  
softkey).  
.
If you can’t recall your lock code, try using the last four  
digits of your wireless phone number or check your lock  
this doesn’t work, contact your service provider.  
Tip  
4. Select a photo category, and then select an image.  
5. Confirm the image on the preview screen, and then   
press  
.
52  
       
My Name Card  
In My Name Card, you can edit your contact information to display  
when you need, as well as send or exchange it via Bluetooth.  
To display your name card:  
From standby mode, press CONTACTS (right softkey) >  
OPTIONS (right softkey) > Settings > My Name Card.  
To edit your name card:  
1. From the My Name Card screen, press OPTIONS (right  
softkey) > Edit.  
2. Highlight each field you want to edit and press  
.
3. Edit the information. When finished, press DONE (left  
softkey).  
To send or exchange your name card via Bluetooth:  
1. Make the Bluetooth connection with the other device.   
(See section 2H, “Bluetooth,” on page 76.)  
2. From the My Name Card screen, select OPTIONS (right  
softkey) > Send Name Card or Exchange Name Cards.  
3. Highlight a device and press  
.
53  
     
3. Enter a description and press  
4. Select a category for the event (Appointment, Meeting, etc.)  
by highlighting the category field and pressing  
5. Select a priority for the event by highlighting the priority field  
and pressing  
6. Select a start and end time for the event by highlighting the  
time field and pressing  
.
2E. Calendar and Tools  
.
.
.
7. Enter a location for the event by selecting the location field  
and pressing EDIT (left softkey). Press  
when you have  
finished.  
8. Select a ringer type for the alarm by highlighting the ringer  
field and pressing  
.
Calendar  
To download ringers, select Downloaded > Get New.  
9. Select an alarm time by highlighting the alarm time field and  
pressing  
.
Adding an Event to the Calendar  
10. Select a repeat status for the alarm by highlighting the  
repeat field and pressing  
If you chose Specific Period, set a start and end date for  
the repeat and press  
Your Calendar helps organize your time and reminds you of up to  
100 important events.  
.
1. Press  
> Calendar.  
.
2. Highlight a day to which you would like to add a schedule  
event and press OPTIONS (right softkey) > Add Schedule.  
If you chose Weekly, select the check box for each day of  
week you wish to set and press DONE (left softkey).  
54  
     
11. Press SAVE (left softkey).  
7. Select a time and date for the item by highlighting the time  
and date field and pressing  
.
To change the calendar display views, press the left softkey  
repeatedly to toggle between MONTHLY and WEEKLY  
Tip  
8. Select a status for the item by highlighting the status   
views.  
field and pressing  
to Needs Action.  
. When you add an item, set it   
On the weekly view, press the navigation key up or down to  
display the previous week or the next week, respectively.  
9. Press SAVE (left softkey).  
Press OPTIONS (right softkey) > Settings >   
Holiday/Weekday to enter holidays and weekdays.  
To Do List items cannot be set to recur.  
Note  
Calendar Alerts  
Adding a To Do List Item to the Calendar  
Your phone can store and manage up to 40 To Do list items.  
If you have scheduled events on the Calendar, your phone alerts  
you by a ringing or vibrating alarm and displays a summary of the  
scheduled events.  
1. Press  
> Calendar.  
To respond to the alarm:  
2. Highlight a day to which you would like to add a To Do list  
item and press OPTIONS (right softkey).  
Press SNOOZE (left softkey) to stop the alarm and start  
snooze mode.  
3. Press the navigation key right and select Add To Do.  
– or –  
4. Enter a description and press  
5. Select a category for the item (Appointment, Meeting, etc.)  
by highlighting the category field and pressing  
6. Select a priority for the item by highlighting the priority field  
and pressing  
.
Press DISMISS (right softkey) to clear the alarm.  
– or –  
.
On the notification screen, the description you have entered  
for that event is displayed. If certain information (such as an  
email address, street address, phone number, or URL) is  
.
55  
   
highlighted in the description, press  
related option menus. (See page 25.)  
to display the  
Deleting Events  
1. Press  
> Calendar.  
If the description includes multiple items of information as  
described above, press the navigation key up or down to  
highlight a specific item.  
2. Highlight the day from which you would like to delete an  
event and press  
.
To change the alarm settings, press  
OPTIONS (right softkey) > Settings > Alarm to set the  
> Calendar >  
– or –  
Tip  
Press OPTIONS (right softkey) > Schedule List or To Do List.  
ringer length and snooze options.  
3. Highlight an event and press OPTIONS (right softkey) >  
Delete.  
Viewing Events  
4. Highlight an option and press  
This to delete the highlighted event.  
.
Days with scheduled events are indicated by small colored  
rectangles just below the date. A rectangle’s color depends  
on the repeat status for an event.  
Tip  
Select to delete multiple events.  
1. Press  
> Calendar.  
All on This List to delete all events on the list.  
Completed To Do to delete completed To Do List items.  
2. Highlight the day for which you would like to view events and  
press  
. The day’s event list is displayed.  
5. Press YES (left softkey).  
– or –  
To delete old or all events:  
Press OPTIONS (right softkey) > Schedule List or To Do List.  
Press  
> Calendar > OPTIONS (right softkey) >   
3. Highlight an event and press  
displayed. You can edit the event on this screen.  
. The event’s details are  
Delete Memory > Delete Old or Delete All > YES   
(left softkey).  
56  
 
8. Select a volume level for the alarm by highlighting the  
volume field and pressing  
Alarm  
.
9. Select a ringer length for the alarm by highlighting the ringer  
length field and pressing  
Your phone comes with a built-in alarm that has multiple alarm  
capabilities.  
.
10. Select a snooze interval minutes for the alarm by highlighting  
the snooze interval field and pressing  
1. Press  
2. Highlight an alarm number and press  
3. Enter a description for the alarm by highlighting the  
description field and pressing  
4. Select a time for the alarm by highlighting the time field and  
pressing  
5. Select a repeat status for the alarm by highlighting the  
repeat field and pressing  
6. Turn the alarm on or off by highlighting the alarm field and  
pressing  
Highlight On or Off and press  
> Tools > Alarm.  
.
.
11. Select a snooze time for the alarm by highlighting the snooze  
time field and pressing  
.
.
12. Press SAVE (left softkey).  
Press ON or OFF (left softkey) to toggle the alarm on   
and off.  
Tip  
.
In steps 4 and 9, use your keypad or navigation key (up or  
down to change value, left or right to move underscore) to  
set the alarm time.  
.
.
responding to the alarm.  
.
7. Select a ringer option for the alarm between Downloaded,  
Preloaded Ringers, and No Ringer by highlighting the ringer  
field and pressing  
If you select Downloaded or Preloaded Ringers, highlight a  
ringer type and press  
.
.
57  
   
Calculator  
Countdown Timer  
Your phone comes with a built-in calculator.  
This feature allows you to use your phone as a countdown timer  
to alert you when a specified period of time has elapsed. You can  
set up to five timers.  
1. Press  
> Tools > Calculator.  
2. Enter numbers using your keypad.  
Press the appropriate key for an arithmetic option  
1. Press  
2. Highlight a countdown timer number and press  
3. Highlight a setting and press  
> Tools > Countdown.  
.
(
).  
.
Press the left softkey to enter a decimal point.  
Description to enter a description of the countdown.  
Press the right softkey to clear all numbers.  
Time to enter the length of the countdown with four digits.  
(For example, to set the timer to 20 minutes, enter “0020”  
using your keypad.)  
3. Press  
for the total.  
World Clock  
Alarm to set the countdown alarm to on or off.  
4. Press SAVE (left softkey).  
To view the time in different locations:  
1. Press > Tools > World Clock.  
Press ON or OFF (left softkey) to toggle the countdown  
Tip  
alarm on and off.  
2. Press the navigation key left or right to scroll through  
different time zones.  
Press SETTINGS (right softkey) to set ringer length and  
snooze options.  
Press SUMMER (left softkey) or STANDARD (right softkey)  
to change between daylight saving and standard time.  
Note  
responding to the alarm.  
58  
             
Stopwatch  
1. Press  
> Tools > Stopwatch.  
2. Press MODE (left softkey) to select split timing or lap timing.  
3. Press START (right softkey) to start the stopwatch.  
4. Press SPLIT or LAP (left softkey) to record the time.  
5. Press STOP (right softkey) to stop timing.  
6. Press RESET (left softkey) to reset the stopwatch to zero.  
59  
   
Available ASR commands include:  
Call <Name or #> to call an entry in your Contacts list or a  
spoken phone number. (See “Making a Voice Call Using ASR”  
below for details.)  
2F. Voice Services  
Send Text <Name or #> to send a text message to an entry in  
your Contacts list or to a spoken phone number. (See page 61  
for details.)  
Lookup <Name> to display the detail screen of an entry in your  
Automatic Speech Recognition (ASR)  
Go To <Menu> to jump directly to menu items or applications.  
You can use your phone’s built-in automatic speech recognition  
(ASR) software to dial a phone number or to launch phone  
functions. All you have to do is to talk into the phone, and ASR will  
recognize your voice and complete tasks by itself.  
Check <Item> to check your phone’s status. (See page 62 for  
details.)  
Use ASR in a quiet environment so it can accurately  
recognize your commands.  
Tip  
Activating ASR  
During ASR operation, press HELP (left softkey) to get  
instructions for using the software.  
Press and hold  
or  
.
The screen displays “Say a command” and the phone prompts  
you to say the name of the command you want to use. To  
complete your task, simply follow the voice prompts.  
Making a Voice Call Using ASR  
1. Press and hold  
or  
.
2. When you hear “Say a command,” say “Call.”  
60  
         
3. When you hear “Say the name or number,” say a name or a  
Displaying a Contacts Entry’s Information  
Using ASR  
phone number.  
4. When you hear “Which location?,” say a number type (for  
example, “Mobile”).  
1. Press and hold  
or  
.
2. When you hear “Say a command,” say “Lookup.”  
You can skip steps 3 and 4 by saying a name and location  
after “Call” without pausing (for example, “Call John Jones  
mobile”).  
Tip  
3. When you hear “Say the name,” say a Contact entry’s name.  
The phone displays the detail screen for that Contacts entry.  
If ASR does not recognize the name or number, it will find  
the most likely matches and display a list of up to three  
names or numbers. You will hear “Did you say Call…”  
followed by the name or number. You can confirm by saying  
Yes.” Say “No” to change the selection.  
Note  
Opening Menus Using ASR  
You can jump directly to many menu items or applications by  
saying “Go to” followed by a menu option.  
1. Press and hold  
or  
.
Sending a Text Message Using ASR  
2. When you hear “Say a command,” say “Go To.”  
1. Press and hold  
or  
.
3. When you hear “Which shortcut?,” say an application name  
(for example, “Messages”).  
2. When you hear “Say a command,” say “Send Text.”  
4. The phone opens the selected menu.  
3. When you hear “Say the name or number,” say a name or a  
phone number.  
Say “More options” to display additional application  
Tip  
names.  
4. When you hear “Which location?,” say a number type (for  
example, “Mobile”). The phone displays the text entry  
screen. (See page 87 for how to compose a message.)  
61  
     
Always Confirm to always ask for confirmation.  
Checking Phone Status Using ASR  
You can use ASR to obtain information about your phone.  
Never Confirm to never ask for confirmation.  
To adapt the system to your voice:  
1. Press and hold  
or  
.
1. Press and hold  
or  
.
2. When you hear “Say a command,” say “Check.”  
2. Press SETTINGS (right softkey) > Adaptation > Adapt Voice.  
3. When you hear “Which status item?,” say a command.  
Status (all of the following except My Phone Number)  
Time  
3. Press START (left softkey) and repeat each word, phrase, or  
telephone number you hear.  
To reset the adaptation:  
Signal Strength  
Network  
1. Press and hold  
or  
.
Battery  
2. Press SETTINGS (right softkey) > Adaptation > Reset Voice >  
YES (left softkey).  
My Phone Number  
To change the ASR mode:  
ASR Settings  
1. Press and hold  
2. Press SETTINGS (right softkey) > Audio Modes.  
3. Highlight an option and press  
or  
.
To change ASR confirmation:  
1. Press and hold  
2. Press SETTINGS (right softkey) > Confirmation.  
3. Highlight an option and press  
Automatic to ask for confirmation only when the system is  
not sure what you said.  
or  
.
.
Expert Mode to sound a beep only.  
.
Prompt Mode to prompt for required information.  
Readout Mode to prompt for required information and to  
read the text displayed on the main screen.  
62  
 
To change the ASR dialing region:  
1. Press and hold or  
2. Press SETTINGS (right softkey) > Dialing Region.  
3. Highlight an option and press  
Recording Memos  
.
To record an audio memo:  
1. Press  
Record.  
> Tools > Voice Services > Voice Memo >  
.
North America to recognize only numbers valid in North  
America.  
2. Start recording after the beep.  
To stop recording:  
Other to recognize any number regardless of location.  
Press  
,
,
, or STOP (left softkey).  
To display the ASR software version:  
To record a call memo:  
1. Press and hold  
or  
.
1. During a call, press OPTIONS (right softkey) > Voice Memo.  
2. Start recording after the beep.  
2. Press SETTINGS (right softkey) > About.  
Managing Voice Services  
To stop recording:  
Press  
,
, or STOP (left softkey). (Recording will also  
Use your phone’s Voice Services to record audio memos to  
remind you of important events, phone numbers, or grocery list  
items, and to record call memos of the other party’s voice during  
a phone call.  
stop when the other party disconnects.)  
You can store up to 1900 memos on your phone. Each  
memo can be up to three minutes long.  
Note  
63  
     
3. Highlight an option and press  
Edit Title to edit the title of a memo.  
.
Playing Recorded Memos  
1. Press  
> Tools > Voice Services > Voice Memo > List.  
Properties to display information about a memo.  
2. Highlight the memo you want to play and press  
.
Type Filter to list memos by the type order as audio memo,  
call memo, or all memos.  
– or –  
Press OPTIONS (right softkey) > Play > All to play all memos  
continuously.  
Sort by to sort memos by the recorded time, file name or  
size in ascending or descending order.  
To play multiple memos:  
Deleting Recorded Memos  
1. Press  
> Tools > Voice Services > Voice Memo > List.  
1. Press  
> Tools > Voice Services > Voice Memo > List.  
2. Press OPTIONS (right softkey) > Play > Multiple and select  
memos you want to play.  
2. Highlight the memo you want to delete and press OPTIONS  
(right softkey) > Delete > This or All > YES (left softkey).  
3. Press PLAY (left softkey).  
To delete multiple memos:  
Press SLOW (left softkey) or FAST (right softkey) to change  
the playing speed. Press the navigation key left or right to  
play the previous or next memo.  
Note  
1. Press  
> Tools > Voice Services > Voice Memo > List.  
2. Press OPTIONS (right softkey) > Delete > Multiple and select  
memos you want to delete.  
Managing Recorded Memos  
3. Press DELETE (left softkey) > YES (left softkey).  
1. Press  
> Tools > Voice Services > Voice Memo > List.  
2. Highlight a memo and press OPTIONS (right softkey).  
64  
 
To activate camera mode, you can also press  
Photos > Camera.  
>
Tip  
2G. Camera  
2. Using the phone’s main screen as a viewfinder, aim the  
camera lens at your subject.  
3. Press  
,
, CAPTURE (left softkey), or the side camera  
button until the shutter sounds. The picture will automatically  
be saved in the In Phone folder. (See “Storing Pictures” on  
To return to camera mode to take another picture, press  
,
, or the side camera button.  
4. Press OPTIONS (right softkey) for more options.  
Take Picture to return to camera mode to take another  
Taking Pictures  
picture.  
Taking pictures with your phone’s built-in camera is as simple as  
choosing a subject, pointing the lens, and pressing a button.  
Send Media to send your picture in a message. (See  
Print to print the picture using a Bluetooth-enabled printer.  
1. To activate camera mode, press and hold  
or the camera  
button located on the left side of your phone. (Additional  
camera options are available. See “Camera Mode Options”  
on page 66 for more information.)  
Upload to upload the picture to the picture messaging  
website (www.plspictures.com). (See “Uploading Pictures”  
If the Parental Controls feature is on and the Camera is  
restricted, you cannot activate camera mode. (See page 39.)  
Review Media to go to the In Phone folder to review your  
saved pictures.  
Note  
65  
       
Set as to assign the picture. (See “Assigning Pictures”  
below.)  
Camera Mode Options  
Press OPTIONS (right softkey) in camera mode to display  
additional camera options:  
Delete to delete the picture you just took.  
Details/Edit to edit your picture or display details relating to  
your pictures.  
Picture Mode to select a picture mode from Normal,   
Beach/Snow, Scenery, Mirror Image, or Night/Dark.  
Assigning Pictures  
Zoom to zoom in and out on a subject. (See “Zoom” on  
Assign a picture as a screen saver or as a picture ID.  
Self-Timer to activate the camera’s timer. (See “Self-timer” on  
2. With the picture displayed, press OPTIONS (right softkey) >  
Set as and select an option.  
Fun Tools to select an option from the following:  
Multiple Shots to take multiple shots. (See “Multiple Shots”  
Picture ID to assign the picture to one or all of Contacts  
entries as well as to unsaved phone numbers, or to private  
Fun Frames to select your favorite fun picture frame to  
decorate your picture.  
You cannot use Fun Frames feature when resolution is set  
Note  
Screensaver to assign the picture as a screen saver. Press  
to assign the picture.  
You can also assign pictures from the My Albums menu.  
Color Tone to select from a wide variety of color tones for  
the picture.  
Tip  
Image Controls to select an option from Brightness,   
White Balance, Sharpness, or Contrast.  
You can view pictures assigned as picture IDs or screen  
savers by pressing MENU/OK > Tools > Assigned Media.  
66  
     
CameraSettings to select Resolution, Quality, and other  
Multiple Shots  
This feature allows you to take three, six, or nine shots in a  
continuous sequence. When you take multiple shots,  
displayed in the viewfinder.  
Review Media to go to the In Phone folder to review your saved  
pictures.  
will be  
Key Guidance to show keypad shortcuts in camera mode.  
1. From camera mode, press OPTIONS (right softkey) >   
Fun Tools > Multiple Shots.  
User Settings to provide convenient access to your favorite  
When taking multiple shots, the resolution is temporarily  
set to Low-240x320.  
Note  
Self-timer  
1. From camera mode, press OPTIONS (right softkey) >   
Self-Timer.  
2. Highlight an option (3 Shots, 6 Shots, or 9 Shots) and press  
.
2. Highlight a delay time (10 Seconds or 5 Seconds) and press  
3. Highlight the duration of the interval between shots (Normal  
.
or Fast) and press  
.
3. Press  
the timer. (You will see  
phone will beep during the countdown.)  
or START (left softkey) when you are ready to start  
4. Press  
,
, CAPTURE (left softkey), or the side camera  
at the top of the screen and your  
button to take the pictures. (The MULTIPLE SHOTS folder will  
display up to nine miniature thumbnail pictures per screen.)  
4. Get ready for the picture. (When the timer is down to three  
seconds, the self-timer icon will turn red and the beep sound  
will change.)  
To cancel the self-timer after it has started:  
Press CANCEL (right softkey) or  
.
67  
       
Zoom  
Saving Your Settings  
This feature allows you to zoom in on an object when you take a  
picture. You can adjust the zoom from 1x to 12x.  
You can save your favorite camera mode options as your  
preferred settings.  
1. From camera mode, press the navigation key right to zoom  
in or left to zoom out.  
1. Set your favorite camera mode options and press OPTIONS  
(right softkey) > User Settings.  
2. Press  
,
, CAPTURE (left softkey), or the side camera  
2. Highlight an unassigned number and press  
> YES (left  
button to take a picture.  
softkey). (The Default keeps the original settings.)  
3. Enter a title and press  
.
Camera Settings  
4. Confirm the settings and press  
.
1. From camera mode, press OPTIONS (right softkey) >  
CameraSettings.  
To retrieve your settings:  
2. Highlight an option and press  
Resolution to select a picture’s file size   
(1.3M-960x1280, Med-480x640, or Low-240x320).  
.
1. From camera mode, press OPTIONS (right softkey) >   
User Settings.  
2. Highlight a customized settings group and press  
YES (left softkey).  
>   
Quality to select the picture quality setting (Fine, Normal, or  
Economy).  
To replace settings, highlight a customized settings group  
and press OPTIONS (right softkey) > Overwrite > YES (left  
softkey).  
Note  
Shutter Sound to select a shutter sound (Default,   
Say Cheese,” “Ready,” or Off).  
Status Bar to display or hide status indicators and softkeys.  
These can be displayed or hidden by pressing the  
navigation key up or down.  
Save Setting to select Auto or Manual saving of pictures.  
68  
       
Camera Icons  
Storing Pictures  
Function  
Icon  
Details  
Beach/Snow  
Use this setting in bright light.  
Your phone’s picture storage area is called My Albums. There are  
two types of folders in My Albums:  
Scenery  
Mirror Image  
Night/Dark  
Sunny  
Use this setting for scenery at a distance.  
Use this setting to take a mirror image.  
Use this setting in low light.  
Picture  
Mode  
In Phone (see “In Phone Folder” below)  
Online Albums (see page 74)  
Use this setting for sunny weather.  
Use this setting for cloudy weather.  
Use this setting for incandescent lighting.  
Use this setting for fluorescent lighting.  
In Phone Folder  
Cloudy  
White  
Balance  
Tungsten  
Fluorescent  
Manual  
Your phone’s internal storage area is called the In Phone folder.  
From the In Phone folder, you can view all the pictures you have  
stored there, send items to the picture messaging website  
(www.plspictures.com), delete files, and access additional  
options.  
To set the white balance manually.  
To set brightness manually.  
Brightness  
Sharpness  
Contrast  
Manual  
Manual  
To set sharpness manually.  
To set contrast manually.  
To review your stored pictures in the In Phone folder:  
Manual  
For 1.3-megapixel picture resolution.  
For medium picture resolution.  
For low picture resolution.  
Press  
> My Albums > In Phone.  
1.3M  
Medium  
Low  
Resolution  
In Phone Folder Options  
Numeric countdown will appear when the  
self-timer has been started.  
When you are viewing the In Phone folder, press OPTIONS (right  
softkey) to display the following options:  
Self-Timer  
Multiple Shots  
Use this setting for multiple shots.  
Send Media to send your picture in a message. (See “Sending  
69  
         
Upload to upload pictures from the In Phone folder to the  
picture messaging website (www.plspictures.com).  
(Depending on your settings, the system may prompt you to  
accept a Web connection.) Choose from the following options:  
Delete to delete pictures. Select This, Selected, or All.  
Deleting pictures will free up memory space in your phone  
to enable you to take more pictures. Once deleted, you  
cannot upload pictures to your online picture messaging  
account.  
Note  
This to upload the item currently highlighted.  
Selected to upload the selected item(s). Press  
select an item. (The box on the lower right corner will be  
checked.)  
to  
Details/Edit to edit or display details relating to your pictures.  
Text Caption to edit the selected picture’s caption.  
Special Effects to select from Fun Frames, Color Tone,   
Fun Stamps, or Rotate.  
All to upload all items in the In Phone folder.  
If this is the first time you have accessed picture  
messaging, the system will prompt you to register your  
picture messaging account. See “Registering Your Picture  
Note  
Resize to resize the selected picture. Select Med-480x640  
or Low-240x320.  
Trimming to crop the selected picture.  
Picture Info to display information such as the picture’s  
caption, time/date, and size.  
Print to print items using a Bluetooth-enabled printer.  
Set as to select from these options:  
Full Screen to display the selected picture in full screen  
view.  
Picture ID to assign the currently highlighted picture to one  
or all of Contacts entries as well as to unsaved phone  
numbers, or to private and unknown phone numbers. See  
Slideshow to view your pictures in slideshow mode (only  
available when you save two or more pictures to the folder).  
Album List to display the album list.  
Screensaver to assign the currently highlighted picture as a  
Camera Mode to activate camera mode.  
screen saver. Press  
to assign the picture.  
70  
register your picture messaging account and establish a  
password through your phone. This password will also allow you  
to sign in to the picture messaging website at  
www.plspictures.com to access and manage your uploaded  
pictures and albums.  
Reviewing Pictures in Assigned Media  
Folder  
The Assigned Media folder automatically stores copies of pictures  
assigned as a picture ID or as a screen saver on your phone. (See  
1. Press  
> My Albums > Online Albums. (Follow the  
prompts to register your picture messaging account.)  
1. Press  
> Tools > Assigned Media.  
If your service plan does not include picture messaging,  
you will first be prompted to subscribe to the service for an  
additional monthly charge.  
Note  
2. Use your navigation key to view and scroll through the  
pictures. Press the left softkey to switch the view between  
EXPAND and THUMBNAIL display.  
2. Enter a password for your picture messaging account and  
press . (You will be prompted to confirm your password.)  
Sending Pictures  
3. Please wait while the system creates your account.  
Once you have taken a picture, you can use the messaging  
capabilities of your phone to instantly share it with family and  
friends. You can send pictures to up to 25 people at a time using  
their email addresses or their phone numbers.  
Write down your picture messaging password in a secure  
place.  
Tip  
Once you have received confirmation that your account has been  
successfully registered, you may upload and share pictures and  
access the picture messaging website.  
Registering Your Picture Messaging  
Account  
The first time you use any of the picture management options  
involving the picture messaging website, follow the prompts to  
71  
     
6. If you wish to include an audio message, scroll to the Audio  
field, and then press RECORD (right softkey) > to  
record. (Maximum recording time is 10 seconds. If you close  
the phone, the recording will stop and the data recorded  
until then will be attached.)  
Sending Pictures From the In Phone Folder  
1. Press  
> My Albums > In Phone.  
2. Highlight a picture to send and press  
. (You can select  
multiple pictures by highlighting each in turn and pressing  
to check the picture’s box.)  
7. To set the priority, scroll to the Priority field, and then select  
High, Normal, or Low.  
3. Press OPTIONS (right softkey) > Send Media.  
8. Confirm the recipients, message, audio memo, and pictures.  
(You may also select additional options by pressing the right  
softkey. Follow the onscreen instructions to add available  
options.)  
4. Select the recipient from the list or from the following  
options.  
Go to Contacts to select a recipient from your Contacts.  
(Qualifying Contacts entries must contain a wireless phone  
number or an email address.)  
9. Press SEND (left softkey) to send the pictures.  
MULTIPLE (left softkey) to select multiple recipients. Press  
CONTINUE (left softkey) when you have finished selecting  
recipients. (You may include up to 25 recipients per  
message.)  
Sending Pictures From the Messages Menu  
You can also send picture messaging from your phone’s  
Messages menu.  
NEW ADDRESS (right softkey) to enter a recipient’s wireless  
phone number or email address directly. Press CONTINUE  
(left softkey) to proceed.  
1. Press  
> Messages > Send Message > Picture Messaging.  
2. Select the recipient from the list or from the following  
options.  
5. If you wish to include a text message, scroll to the Text field,  
and then enter your message.  
Go to Contacts to select a recipient from your Contacts.  
(Qualifying Contacts entries must contain a wireless phone  
number or an email address.)  
72  
 
MULTIPLE (left softkey) to select multiple recipients. Press  
CONTINUE (left softkey) when you have finished selecting  
recipients. (You may include up to 25 recipients per  
message.)  
8. Press SEND (left softkey) to send the pictures.  
Viewing Picture Messages  
NEW ADDRESS (right softkey) to enter a recipient’s wireless  
phone number or email address directly. Press CONTINUE  
(left softkey) to proceed.  
When you receive a picture message, a notification will  
automatically be displayed on your phone’s screen. Use your  
softkeys to view picture messages.  
3. Select a picture from In Phone or Online Albums and press  
> NEXT (left softkey). (You can also choose to take a  
new picture.)  
– or –  
1. Press  
> Photos or Messages > Picture Messaging.  
4. If you wish to include a text message, scroll to the Text field,  
2. Select Inbox.  
and then enter your message.  
3. Highlight a message and press  
message options, press OPTIONS [right softkey].)  
. (To display the  
5. If you wish to include an audio message, scroll to the Audio  
field, and then press RECORD (right softkey) >  
to  
To reply to picture messages:  
record. (Maximum recording time is 10 seconds. If you close  
the phone, the recording will stop and the data recorded  
until then will be attached.)  
1. While the message is displayed, press OPTIONS (right  
softkey) > Reply with > Text Message.  
6. To set the priority, scroll to the Priority field, and then select  
High, Normal, or Low.  
2. Compose a message and press SEND (left softkey).  
– or –  
7. Confirm the recipients, message, audio memo, and pictures.  
(You may also select additional options by pressing the right  
softkey. Follow the onscreen instructions to add available  
options.)  
1. Press  
> Photos or Messages > Picture Messaging.  
2. Select Inbox.  
73  
 
3. Highlight a message to which you want to reply and press  
Uploading Pictures  
OPTIONS (right softkey) > Reply with > Text Message.  
1. Press  
> My Albums > In Phone.  
4. Compose a message and press SEND (left softkey).  
2. Select the check box for each picture you wish to upload and  
press OPTIONS (right softkey) > Upload.  
Managing Pictures  
3. Select Selected or All.  
4. Select “Uploads”Area or Other Albums.  
Picture Messaging Website  
Managing Online Pictures From Your Phone  
Use your phone to manage, edit, or share pictures you have  
uploaded to the picture messaging website.  
Once you have uploaded pictures to your online picture  
messaging account (see “Uploading Pictures” on this page), you  
can use your computer to manage your pictures. From the picture  
messaging website, you can share pictures, edit album titles, add  
captions, and organize images.  
1. Press  
> My Albums > Online Albums. The Uploads  
folder and your albums are displayed.  
You will also have access to picture management tools to improve  
and customize your pictures. You’ll be able to lighten, darken,  
crop, add antique effects, add comic bubbles and cartoon effects,  
and use other features to transform your pictures.  
2. Highlight Uploads or an available album title and press  
Miniature thumbnail pictures, up to nine per screen, are  
displayed.  
.
To access the picture messaging website:  
To expand a selected picture from miniature thumbnail to  
full-screen, press EXPAND (left softkey).  
Tip  
1. From your computer, go to www.plspictures.com.  
2. Enter your phone number and picture messaging password  
74  
     
3. Highlight a picture and press OPTIONS (right softkey) to  
Managing Online Albums  
display your online picture options.  
1. Press  
> My Albums > Online Albums.  
Send Media to send your picture.  
2. Highlight an album (or the Uploads folder) and press  
OPTIONS (right softkey).  
Set as to assign the picture.  
Save to Phone to download the pictures to the In Phone  
folder.  
3. Highlight an option and press  
.
Edit/Delete to select an option from the following:  
Delete to delete pictures/videos saved in the current album  
(or the Uploads folder).  
Delete Album to delete the selected album.  
Copy/Move to copy or move pictures/videos to a selected  
album.  
Rename Album to rename the selected album.  
Album Info to display detailed information about the  
album.  
Details/Edit to edit or display details relating to your  
pictures/videos.  
Create Album to create a new album. Enter a new album  
name and press > SAVE (left softkey).  
Media Filter to filter only pictures, only videos, or to display  
all media files.  
The Uploads folder cannot be deleted or renamed.  
Note  
Album List to display the album list.  
75  
 
Turning Bluetooth On and Off  
2H. Bluetooth  
By default, your phone’s Bluetooth feature is turned off. Turning  
Bluetooth on enables your phone’s Bluetooth functions.  
1. Press  
> Bluetooth > On/Off.  
2. Press ON (left softkey) to enable Bluetooth. Press OFF (left  
softkey) to disable Bluetooth.  
Making Your Phone Discoverable  
To make your phone discoverable (allowing other Bluetooth  
devices to detect it), you must set your phone’s visibility to other  
than Hidden.  
1. Press  
> Bluetooth > Visibility.  
The first time you access the Visibility menu, you will be  
advised to enable Bluetooth by pressing ON (left softkey).  
On the next screen, you can customize the device name by  
overwriting it and pressing SAVE (left softkey).  
Note  
About Bluetooth  
®
Bluetooth is a short-range communications technology that  
allows you to connect wirelessly to a number of Bluetooth  
devices, such as headsets and hands-free car kits, and  
Bluetooth-enabled handhelds, computers, printers, and wireless  
phones. The Bluetooth communication range is usually up to  
approximately 30 feet.  
2. Select Visible for 3 min or Always visible. If you select  
Always visible, your phone will be discoverable by all   
in-range Bluetooth devices until you change the setting.   
If you select Visible for 3 min, your phone will return to  
hidden mode after three minutes.  
76  
           
Press  
> Bluetooth to select from the following options.  
Bluetooth Status Indicators  
On/Off to turn Bluetooth functions on or off. When On is  
selected, your phone can receive requests from other Bluetooth  
devices. (See page 76.)  
The following icons show your Bluetooth connection status at a  
glance:  
– Bluetooth feature is on.  
Visibility to set your phone’s visibility (or “discoverability”)  
– Your phone is visible to other Bluetooth devices.  
– Your phone is connected to a Bluetooth device.  
for other Bluetooth devices.  
Add New to add a new Bluetooth device.  
You can choose the device you wish to add to the  
the desired device into visible (or “discoverable”) mode.  
If asked for a PIN code, you must enter the same PIN  
code as the desired device. (See “Pairing Bluetooth  
The above icons will blink while your phone is communicating  
with a Bluetooth device.  
Bluetooth Menu  
Trusted Devices to display a list of your trusted Bluetooth  
devices. Select Add New and follow steps 2-4 in “Pairing  
Bluetooth Devices” to add a new Bluetooth device. Up to 20  
devices can be listed. (See page 78.)  
The Bluetooth menu allows you to set up many of the  
characteristics of your phone’s Bluetooth service, including:  
Setting your phone’s visibility (or “discoverability”) for other  
Bluetooth devices.  
My Bluetooth Info to display the name, address, class, and  
supported profiles of your phone. You can edit the  
Bluetooth name (device name) of your phone that will  
appear on other in-range Bluetooth devices, depending on  
your visibility settings.  
Adding a new Bluetooth device to your phone.  
Displaying your Bluetooth trusted devices list.  
Displaying your phone’s Bluetooth information.  
77  
   
Pairing Bluetooth Devices  
Viewing the Trusted Devices List  
The Bluetooth pairing process allows you to establish trusted  
connections between your phone and another Bluetooth device.  
When devices are paired, a passkey (PIN) is shared between  
devices, allowing for fast, secure connections while bypassing the  
discovery and authentication process.  
This list displays a list of devices which are paired with your  
device and set as trusted devices.  
From the Bluetooth menu, select Trusted Devices.  
Trusted Devices List Menu  
Once you have created trusted devices, several options are  
available from the Trusted Devices list.  
1. From the Bluetooth menu, select Add New. (See “Bluetooth  
2. Highlight the device you wish to pair with and press  
.
Left Softkey Menus  
3. Enter the passkey of your device or the other’s and   
From the Trusted Devices list, highlight a device, and press  
the left soft key menu item which appears depending on the  
type of device highlighted.  
press  
.
4. (Optional) Edit the device name and press SAVE (left softkey).  
Due to different specifications and features of other  
Bluetooth compatible devices, display and operations may  
be different, and functions such as transfer or exchange  
may not be possible.  
Note  
CONNECT to connect to the selected Bluetooth device, if  
not connected (for headsets, hands-free and other devices,  
excluding computers, PDAs, phones, or printers).  
TRANSFER... to send data saved on your phone to the  
selected Bluetooth device (for computers, PDAs, or  
PRINT to print data using the selected Bluetooth-enabled  
78  
   
ON to allow other Bluetooth devices to initiate a connection  
without any confirmation.  
Options Menu  
From the Trusted Devices list, highlight a device and press  
OFF to display a confirmation screen from which you can  
accept or deny a connection.  
OPTIONS (right softkey) to display the following options.  
Add New to add a new Bluetooth device. See the  
description for Add New item on “Bluetooth Menu” on  
Sending Data via Bluetooth  
Delete to delete the selected device from the list.  
You can send Contacts data and Name Cards to or exchange  
Name Cards with another Bluetooth device, such as a computer,  
PDA, or phone.  
Delete All to delete all devices from the list.  
Auto-Accept to configure your phone’s accessibility to other  
Bluetooth devices. (See “Setting Auto-Accept” below.)  
Sending Contacts  
View/Edit Info to view or edit the information of the  
selected device.  
1. From the Bluetooth menu, select Trusted Devices, and  
select a device (computer, PDA, or phone) from the list.  
Help to display the Trusted Devices list help.  
2. Press TRANSFER... (left softkey) > Send Contacts.  
Setting Auto-Accept  
3. Select an option:  
Send All Contacts to send all the entries in your Contacts.  
You can configure your phone’s accessibility to other Bluetooth  
devices.  
Select Contacts to send selected entries. After you have  
selected entries by checking the box next to each entry,  
press CONTINUE (left softkey).  
1. From the Trusted Devices list, highlight a device and press  
OPTIONS (right softkey) > Auto-Accept.  
2. A message will appear asking whether to turn Auto-Accept  
on or off. Press ON or OFF (left softkey).  
4. Read the message and press SEND (left softkey).  
79  
   
4. To set the print settings, highlight each element and select a  
Sending or Exchanging Name Cards  
setting using your navigation key right or left.  
(For more information about Name Cards, please see page 53.)  
Type: You can select the print mode from Prints or Index.  
1. From the Bluetooth menu, select Trusted Devices, and  
select a device (computer, PDA, or phone) from the list.  
Copies: You can set the number of copies from Single,  
Doubles, or Manual. When you select Manual, set the  
number (up to 99 per picture) by pressing your navigation  
key right or left. The number of copies will be displayed in  
the field below.  
2. Press TRANSFER... (left softkey) > Send Name Card or  
Exchange Name Cards.  
3. Press SEND (left softkey).  
Below the Copies element, you can view the miniature  
thumbnails of the selected picture(s) in step 3 and the  
number of copies you have selected in the Copies element  
(if other than the Index print mode is selected). To confirm  
the selected pictures, highlight the thumbnail field and  
press the navigation key right or left.  
Printing Pictures via Bluetooth  
You can print out your pictures stored on your phone. (Some  
Bluetooth-enabled printers may not support this feature.)  
Size: You can set the print size from 4"x6", 5"x7", or  
Letter. (Print sizes may vary according to the type of printer  
you have.)  
1. From the Bluetooth menu, select Trusted Devices, and  
select a printer from the list.  
2. Press PRINT (left softkey).  
Date: You can imprint the date on your pictures. Select On or  
Off. (Date stamping may not be available depending on the type  
of printer you have.)  
3. Select the check box for each picture you wish to print and  
press CONTINUE (left softkey).  
Border: You can choose whether to print the pictures with  
or without border. Select On or Off.  
You may not be able to print pictures that you cannot  
display on your phone.  
Note  
80  
   
Caption: You can choose whether to print the pictures with  
or without text captions such as the date captured (if  
available) and serial numbers. Select On or Off.  
5. When you have finished selecting the print settings, press  
PRINT (left softkey), and wait for the Bluetooth connection  
and printing.  
6. When printing is finished, press  
, and then press  
.
Before using the Bluetooth printing feature, make sure your  
phone’s battery is fully charged.  
Note  
81  
 
82  
Section 3  
Wireless Service  
   
1. From standby mode, press and hold  
.
2. Follow the system prompts to:  
Create your passcode.  
3A. Wireless Service:  
The Basics  
Record your name announcement.  
Record your greeting.  
Voicemail Passcode  
Note  
It is strongly recommended that you create a passcode  
when setting up your voicemail to protect against  
unauthorized access. Without a passcode, anyone who has  
access to your handset is able to access your voicemail  
messages.  
If the Parental Controls feature is on and Voice Calls are  
restricted, you cannot call voicemail unless you have  
established your own number as an allowed Contacts entry.  
Voicemail  
Voicemail Notification  
Setting Up Your Voicemail  
There are several ways your phone alerts you to a new message:  
By displaying a message on the screen.  
Your phone automatically transfers all unanswered calls to your  
voicemail, even if your phone is in use or turned off. You should  
set up your voicemail and personal greeting as soon as your  
phone is activated.  
By sounding the assigned ringer type.  
By displaying  
at the top of the screen.  
84  
       
Using One-Touch Message Access  
New Voicemail Message Alerts  
Press and hold  
box.)  
. (Your phone will dial your voicemail  
When you receive a new voicemail, your phone alerts you and  
prompts you to call your voicemail.  
To call your voicemail from the notification screen:  
Using the Menu Keys on Your Phone to Access Your  
Messages  
Press  
.
1. Press  
2. Press  
Note  
> Messages > Voicemail.  
When you are roaming off the home network, you may not  
receive notification of new voicemail messages. It is  
recommended that you periodically check your voicemail by  
dialing 1 + area code + your wireless phone number. When  
your voicemail answers, press (*) and enter your passcode.  
You may be charged roaming rates when you access  
voicemail while roaming off the home network.  
Note  
to listen to your messages.  
You are charged for airtime minutes when you are  
accessing your voicemail from your wireless phone.  
Using Another Phone to Access Messages  
1. Dial your wireless phone number.  
Your phone accepts messages even when it is turned off,  
but you can receive voicemail message alerts only when  
your phone is turned on and you are in a wireless service  
area.  
2. When your voicemail answers, press the star key (*).  
3. Enter your passcode.  
Retrieving Your Voicemail Messages  
When you call into voicemail, you first hear the header  
information (date, time, and sender information) for the  
message. To skip directly to the message, press 4 during  
the header.  
Tip  
You can review your messages directly from your wireless phone  
or from any other touch-tone phone. To dial from your wireless  
phone, either speed dial your voicemail (use one-touch message  
access) or use the menu keys.  
85  
Clearing the Message Icon  
Normally, the message icon will go away after you have called  
your voicemail and listened to your message(s). You can also clear  
the message icon manually without calling in to your voicemail.  
Text Messaging (SMS)  
With text messaging (SMS), you can send and receive text  
messages between your phone and another messaging-ready  
phone. When you receive a new message, it will automatically  
display on your phone’s screen.  
Press  
> Messages > Voicemail > Reset Indicator >  
YES (left softkey).  
In addition, text messaging includes a variety of preset messages,  
such as “The meeting has been cancelled,” that make composing  
messages fast and easy. Use your phone to customize your own  
preset messages (up to 50 characters).  
Voicemail Key Guide  
Here’s a quick guide to your keypad functions while listening to  
voicemail messages.  
Text messages can be composed of up to six segments of 160  
characters each, for a total of 960 characters per text message.  
The current segment and total segment count is displayed at the  
top of each segment. For example, (5/6) at the top of a segment  
would indicate you are viewing segment five of a six-segment  
message.  
Date/Time  
Replay  
Erase  
Send Reply  
Rewind  
Advance  
Forward  
See your service plan for applicable charges for text  
messaging.  
Note  
Return Call  
Help  
Save  
Cancel  
Skip  
86  
     
Composing Text Messages  
Accessing Text Messages  
1. Press  
> Messages > Send Message > Text Message.  
To read a text message:  
2. Select a recipient from the list or from the following options.  
When you receive a text message, your phone will display a  
notification message. Use your navigation key to scroll down  
and view the entire message.  
Go to Contacts to select a recipient from your Contacts.  
(Qualifying Contacts entries must contain a phone number  
or an email address.)  
To reply to a text message:  
MULTIPLE (left softkey) to select multiple recipients. Press  
CONTINUE (left softkey) when you have finished selecting  
recipients. (You may include up to 25 recipients per  
message.)  
1. While the message is displayed, press REPLY (left softkey).  
2. Compose a reply and press SEND (left softkey).  
NEW ADDRESS (right softkey) to enter a recipient’s phone  
number or email address directly. Press CONTINUE (left  
softkey) to proceed.  
3. Compose a message.  
Press OPTIONS (right softkey) to select additional options.  
4. Review your message and press SEND (left softkey).  
If the Parental Controls feature is on and Text Messaging is  
restricted, text messaging may be disabled; or text  
messages may only be sent to allowed recipients. (See  
Note  
87  
 
Viewing Messages  
Threaded Messaging  
Highlight a thread and press  
and received from a particular number, in reverse chronological  
order. Failed, pending, and draft messages are also listed.  
to display the messages sent to  
Threaded messaging lets you follow a chain of text messages to  
and from a particular contact.  
To display the thread list:  
Highlight a message to see details for that message.  
Press  
> Messages > Text Messages.  
Entrys name, phone  
You will see a thread list. Each thread has an entry’s name (if  
saved in Contacts), a phone number, or an email address. You will  
also see the number of unread messages, if any, for each thread.  
number, or email address.  
Message you received.  
Me – Message you sent.  
When you highlight a thread, you will see the first few words of  
the most recent message in that thread.  
You may see one of the following headings:  
Me (Failed) – Message you did not send successfully.  
Me (Pending) – Message you have not sent yet because your  
phone has no network connection. The message will be sent  
automatically when your phone reconnects to the network.  
Me (Draft) – Message you saved as a draft. Only one draft can  
be saved in each thread, and that draft appears at the top of  
the thread.  
88  
 
Unlock to unlock the selected message.  
Message Details  
Text messages are automatically deleted starting with the  
oldest. To save messages, lock them.  
Note  
Highlight a message and press  
details and view the entire message.  
to display the message  
You can select certain information from a text message or email  
message and automatically save it or use it in a related  
Delete to delete the selected message.  
Delete All to delete all messages.  
Call to dial the phone number appearing in the selected  
message.  
Threaded Messaging Options  
Go/Open Browser to open the URL appearing in the  
selected message.  
When you are viewing a messaging thread list, a message thread,  
or a message details screen, you can choose from among the  
following options. (Options will vary according to screen.)  
Open to dial the phone number or to open the URL  
appearing in the selected message.  
Press  
or  
to make a call to the entry.  
Save Number to save the phone number appearing in the  
selected message.  
Press SEND MESSAGE (left softkey) to send a message to the  
entry.  
Save Email to save the email address appearing in the  
selected message.  
Press REPLY (left softkey) to reply to a message.  
Press SEND (left softkey) to send a draft message.  
Press RESEND (left softkey) to resend a failed message.  
Settings to display the Messaging Settings menu.  
Select a message, press OPTIONS (right softkey), and select an  
option.  
Forward to forward the selected message.  
Lock to lock the selected message.  
89  
To switch back to the first caller:  
Caller ID  
Press  
again.  
Caller ID allows people to identify a caller before answering the  
phone by displaying the number of the incoming call. If you do not  
want your number displayed when you make a call, follow these  
steps.  
For those calls where you don’t want to be interrupted, you  
can temporarily disable Call Waiting by pressing * 7 0  
before placing your call. Call Waiting is automatically  
reactivated once you end the call.  
Tip  
1. Press  
2. Enter the number you want to call.  
3. Press  
.
Making a 3-Way Call  
.
With 3-Way Calling, you can talk to two people at the same time.  
When using this feature, the normal airtime rates will be charged  
for each of the two calls.  
To permanently block your number, contact your service provider.  
Call Waiting  
1. Enter a number and press  
.
2. Once you have established the connection, press  
.   
When you are on a call, Call Waiting alerts you to incoming calls  
by sounding two beeps. Your phone’s screen informs you that  
another call is coming in and displays the caller’s phone number  
(if available).  
(This puts the first caller on hold.)  
3. Select Contacts, Recent History, or Enter Phone#.  
4. Select a number from your Contacts or Recent History, or  
enter a number directly, and then press  
.
To respond to an incoming call while you’re on a call:  
5. When you’re connected to the second party, press  
again or JOIN (right softkey) to begin your 3-way call.  
Press  
second call.)  
. (This puts the first caller on hold and answers the  
90  
           
If one of the people you called hangs up during your call, you and  
the remaining caller stay connected. If you initiated the call and  
are the first to hang up, all callers are disconnected.  
Roaming  
Roaming Icon  
Call Forwarding  
Your phone’s display screen always lets you know when you’re off  
the home network. Anytime you are roaming, the phone displays  
the roaming icon (  
).  
Call Forwarding lets you forward all your incoming calls to another  
phone number – even when your phone is turned off. You can  
continue to make calls from your phone when you have activated  
Call Forwarding.  
Remember, when you are using your phone off the home  
network, always dial numbers using 11 digits (1 + area  
code + number).  
Tip  
To activate Call Forwarding:  
Roaming on Other Networks  
1. Press  
.
When you’re roaming on other networks, your call quality and  
security will be similar to the quality you receive when making  
calls on the home network. However, you may not be able to  
access certain features, such as Web services, depending on the  
available network.  
2. Enter the area code and phone number to which you want  
your calls forwarded.  
3. Press  
. (You will hear a tone to confirm the activation of  
Call Forwarding.)  
To deactivate Call Forwarding:  
If you’re on a call when you leave the home network, your  
call is dropped. If your call is dropped in an area where you  
think wireless service is available, turn your phone off and  
on again to reconnect to the network.  
Note  
1. Press  
.
2. Press  
. (You will hear a tone to confirm the deactivation.)  
You are charged a higher rate for calls you have forwarded.  
Note  
91  
         
2. Select an option:  
Checking for Voicemail Messages While Roaming  
Home Only to access only the home network and prevent  
roaming on other networks.  
When you are roaming off the home network, you may not receive  
on-phone notification of new voicemail messages. Callers can still  
leave messages, but you will need to periodically check your  
voicemail for new messages if you are in a roaming service area  
for an extended period of time.  
Automatic to seek service on the home network. When  
network service is unavailable, the phone searches for an  
alternate service.  
1. Dial 1 + area code + your phone number.  
Call Guard  
2. When you hear your voicemail greeting, press  
.
Your phone has two ways of alerting you when you are roaming  
off the home network: the onscreen roaming icon and Call Guard.  
Call Guard makes it easy to manage your roaming by requiring an  
extra step before you can place or answer a roaming call. (This  
additional step is not required when you make or receive calls  
while on the home network.)  
3. Enter your passcode at the prompt and follow the voice  
prompts.  
When you return to the home network, voicemail notification will  
resume as normal.  
Setting Roam Mode  
To turn Call Guard on or off:  
Your phone allows you to control your roaming capabilities. By  
using the Roaming menu option, you can determine which signals  
your phone accepts.  
1. Press  
2. Select On or Off.  
Call Guard is turned on by default on your phone.  
> Settings > Others > Roaming > Call Guard.  
Note  
Choose from two different settings on your phone to control your  
roaming experience.  
Voice dialing and speed dialing are not available when you  
are roaming with Call Guard enabled.  
1. Press  
> Settings > Others > Roaming > Set Mode.  
92  
   
To place roaming calls with Call Guard on:  
Data Roam Guard  
1. From standby mode, dial 1 + area code + the seven-digit  
Depending on service availability and roaming agreements, your  
phone may be able to access Web services while roaming on  
certain other networks. You can set your phone to alert you when  
you are roaming off the home network and try to use Web  
services such as messaging.  
number and press  
2. Read the message and press  
To answer incoming roaming calls with Call Guard on:  
1. Press  
2. Read the message and press  
.
.
.
To set your Data Roam Guard notification:  
.
1. Press  
> Settings > Others > Roaming >   
Data Roam Guard.  
If the Call Guard feature is set to On, you need to take extra  
steps to make and receive roaming calls.  
Note  
2. Select On or Off.  
On (default mode) turns your phone’s Data Roam Guard  
feature on. You will see a prompt that will require you to  
respond anytime you access Web services while roaming.  
Off turns your phone’s Data Roam Guard feature off. Your  
phone will not notify you of your roaming status when you  
access Web services.  
To use Web services when Data Roam Guard is active:  
When a notification appears informing you that data roam  
charges may apply, press ROAM (left softkey) to connect.  
93  
When you use data services, your user name is submitted to  
identify you to the home network. Your user name will be  
automatically programmed into your phone. You don’t have to  
enter it.  
3B. Web and Data Services  
Finding Your User Name  
If you are not sure what your user name is, you can easily find it  
on your phone.  
Press  
> Settings > Phone Info > Phone#/User ID.  
Launching a Web Connection  
Press  
the home page.)  
> Web. (Your Web connection starts and you see  
Getting Started With Data Services  
If Net Guard is enabled and displayed (see page 42), press  
YES (left softkey) to continue and launch the Web.  
Note  
With your wireless phone and data services, you are ready to start  
enjoying the advantages of data services. This section will help  
you learn the basics of using your data services, including  
managing your user name, launching a Web connection, and  
navigating the Web with your phone.  
If the Parental Controls feature is on and the Web is restricted,  
you cannot launch a Web connection. (See page 39.)  
While connecting, you may see an animation before the home  
page appears.  
Your User Name  
To change the default launch page to the last page you  
viewed, press TOOLBAR (right softkey) and select OPTIONS>  
Advanced > Startup page > The last page I viewed >  
DONE (left softkey).  
Tip  
When you buy your phone and sign up for service, you’re  
automatically assigned a user name, which is typically based on  
your 10-digit wireless phone number.  
94  
             
Softkeys  
Data Connection Status and Indicators  
During a data session, the bottom line of your phone’s display  
screen contains one or more softkeys. These keys are shortcut  
controls for navigating around the Web, and they correspond to  
the softkeys directly below the phone’s display screen.  
Your phone displays the current status of your data connection  
through indicators at the top of the screen. The following symbols  
are used:  
You are connected to the 1xRTT data network. Data is  
being transferred (for example, when you are opening a  
Web page) and you cannot receive calls.  
Depending on which websites you visit, the labels on the  
softkeys may change to indicate their function.  
Tip  
To use softkeys:  
Press a softkey. (If an additional pop-up menu is displayed  
You are connected to the network but data is not currently  
being transferred (for example, when you are viewing a Web  
page that is completely open), and you can receive calls.  
when you press the softkey, select the menu items using  
your keypad [if they’re numbered], or by highlighting the  
If you do not see an indicator, your phone does not have a current  
data connection. To launch a connection, see “Launching a Web  
option and pressing  
.)  
Scrolling  
Navigating the Web  
Navigating through menus and websites during a data session is  
easy once you’ve learned a few basics. Here are some tips for  
getting around.  
As with other parts of your phone’s menu, you’ll have to scroll up  
and down to see everything on some websites.  
To scroll line by line through websites:  
Press the navigation key up or down.  
95  
 
Selecting  
You can also use the BACK key for deleting text (like a  
BACKSPACE key) when you are entering text.  
Note  
Once you’ve learned how to use softkeys and scroll, you can start  
navigating the Web.  
Going Home  
To select onscreen items:  
To return to the home page from any other page:  
Use the navigation key to highlight an item, and then press  
the left softkey (or press ).  
Press and hold  
– or –  
.
You’ll find that the left softkey is used primarily for selecting  
items. This softkey is often labeled “GO.”  
Tip  
Press TOOLBAR (right softkey) > MY HOMEPAGE.  
If the items on a page are numbered, you can use your  
keypad (number keys) to select an item.  
Accessing Messages  
Links, which are displayed as underlined text, allow you to jump  
to Web pages, select special functions, or even place phone calls.  
You can send and receive email messages or instant messages  
right from your phone. Messaging allows you to stay connected  
24 hours a day anywhere on the home network.  
To select links:  
Highlight the link and press the appropriate softkey.  
Email  
Going Back  
With data services, you can use popular email services such as  
Yahoo!® Mail to keep in touch, even while you’re on the go.  
To go back one page:  
1. From the home page, select Messaging > Email.  
Press  
on your phone.  
2. Select an email provider.  
96  
   
3. Use your keypad to enter the required sign-in information for  
the selected provider, such as user name, email address, or  
password, and select Sign In. (Your mailbox for the selected  
provider will be displayed.)  
4. Follow the onscreen instructions to read, reply to, compose,  
and send messages and manage your IM account.  
Downloading Content  
The information required to sign in will vary depending on  
the email provider you are accessing.  
Note  
You have access to a dynamic variety of downloadable content,  
such as Games, Screen Savers, and other applications.  
(Additional charges may apply.) Follow the basic steps below to  
access and download these items.  
4. Follow the onscreen instructions to read, reply to, compose,  
send, and manage your email account.  
Instant Messaging  
Data services also provide you with access to popular instant  
messaging (IM) clients, including Yahoo!® Messenger.  
Accessing the Download Menus  
1. Press  
> My Stuff.  
2. Select a download category (Games, Ringers, Screen Savers,  
or Applications), and then select Get New. (The browser will  
start and take you to the corresponding download menu.)  
1. From the home page, select Messaging >   
Instant Messaging.  
2. Highlight an IM provider.  
To access the download menus from the Web browser:  
3. Use your keypad to enter the required sign-in information for  
the selected provider, such as user name or password, and  
select Sign In. (You will see Your IM screen for the selected  
provider.)  
1. From the home page, select Downloads.  
2. Select Games, Ringers, Screen Savers, or Applications to  
go to the corresponding download menu. (For more  
information on navigating the Web, see “Navigating the  
The information required to sign in will vary depending on  
the instant messaging provider you are accessing.  
Note  
97  
     
To download a selected item:  
Selecting an Item to Download  
1. From the information page, select Buy. (The item will  
download automatically. When you see the New Download  
screen you have successfully downloaded the item to your  
phone.)  
You can search for available items to download in a number of  
ways:  
Featured displays a selection of featured items.  
Categories allows you to narrow your search to a general  
category, such as Country or Pop/Rock for Ringers or For the  
Ladies for Screen Savers. (There may be several pages of  
available content in a list. Select Next 9 to view additional  
items.)  
If you have not previously purchased an item, you will be  
prompted to create your purchasing profile.  
Note  
2. Select an option to continue:  
Select a menu such as Run/Open/Listen/View/Play to start  
the downloaded item. Your data session will end, and your  
phone will redirect you to the appropriate phone menu  
screen.  
Search allows you to use your keypad to enter search criteria to  
locate an item. You may enter an entire word or title or perform  
a partial-word search.  
Select Set as to assign a ringer or screen saver to a phone  
function.  
Downloading an Item  
Once you’ve selected an item you wish to download, highlight it  
Select Settings to configure downloaded games or  
applications.  
and press  
, or press GO (left softkey). You will see a summary  
page for the item including its title, the vendor, the download  
details, the file size, and the cost. Links allow you to view the  
License Info page, which outlines the price, license type, and  
length of license for the download, and the Terms of Use page,  
which details the Premium Services Terms of Use and your  
responsibility for payment.  
Select Shop to browse for other items to download.  
Press  
to quit the browser and return to standby mode.  
98  
OPTIONS to display additional options:  
Browser Menu  
Set as Homepage to set the current page as your home  
page.  
Although the home page offers a broad and convenient array of  
sites and services for you to browse, not all sites are represented,  
and certain functions, such as going directly to specific websites,  
are not available. For these and other functions, you will need to  
use the browser menu. The browser menu offers additional  
options to expand your use of the Web on your phone.  
Font size to change the font size for the browser.  
Send this page to... to send a Web address (URL) via text  
messaging.  
Clear private data to delete the browser’s cache, cookies,  
etc.  
Help to show more detailed information about using the  
browser.  
Opening the Browser Menu  
You may open the browser menu anytime you have an active data  
session, from any page you are viewing.  
Advanced  
Icon Row to display the icon row, the top area on the  
screen that displays the status icons, time, battery  
charge level, etc.  
To open the browser menu:  
Press TOOLBAR (right softkey). (You will see the browser  
menu.)  
Startup page to change the default launch page.  
Options available under the browser menu include:  
MY HOMEPAGE to return the browser to the home page.  
MY PAGES to access and manage your favorites (bookmarks).  
WEB SEARCH to launch a Web search.  
Page info to display information about the current  
page.  
Images on/off to display images on the Web page.  
Reset browser to reset the browser to its default state.  
Turn on/off error logging to set whether to save error  
logs (text files useful for debugging browser errors).  
View error log to display the error log.  
99  
 
Send referrer to send HTTP URL referrer information.  
Creating a Favorite  
Redirect prompt to display a prompt when your data is  
being redirected.  
Favorites (bookmarks) allow you to store the addresses of your  
favorite websites for easy access at a later time.  
Reset browser settings to reset all browser settings.  
1. From the Web page you wish to add, press TOOLBAR (right  
softkey) to open the browser menu.  
About browser to display information about your  
browser.  
2. Select MY PAGES.  
Java Scripting to enable or disable Java scripting.  
3. Confirm that Add this page to favorites is highlighted and  
Going to a Specific Website  
press  
4. Press ADD (left softkey).  
Saving a page as a favorite does not store the page  
.
To go to a particular website by entering a URL (Web  
address):  
Note  
contents, just its address.  
1. From any Web page, press the navigation key up to highlight  
the address bar.  
Some pages cannot be saved as favorites, depending on  
how a particular page was created.  
2. Use your keypad to enter the URL of the website you wish to  
go to and press  
.
Accessing a Favorite  
Not all websites are viewable on your phone.  
Note  
1. Press TOOLBAR (right softkey) to open the browser menu.  
2. Select MY PAGES.  
3. Highlight a favorite and press  
.
100  
 
Deleting a Favorite  
1. Press TOOLBAR (right softkey) to open the browser menu.  
2. Select MY PAGES.  
3. Highlight a favorite and press OPTIONS (right softkey).  
4. Select Delete this Favorite. (A confirmation will be  
displayed.)  
5. Press REMOVE (left softkey) to remove the favorite.  
Reloading a Web Page  
Press  
while the Refresh icon ( ) at the upper right  
corner of the browser is highlighted.  
101  
 
102  
Section 4  
Safety and Warranty Information  
   
General Precautions  
4A. Important Safety  
Information  
There are several simple guidelines to operating your phone properly and  
maintaining safe, satisfactory service.  
To maximize performance, do not touch the bottom portion of your  
phone where the internal antenna is located while using the phone.  
Speak directly into the mouthpiece.  
Avoid exposing your phone and accessories to rain or liquid spills. If your  
phone does get wet, immediately turn the power off and remove the  
battery.  
Do not expose your phone to direct sunlight for extended periods of time  
(such as on the dashboard of a car).  
Although your phone is quite sturdy, it is a complex piece of equipment  
and can be broken. Avoid dropping, hitting, bending, or sitting on it.  
Any changes or modifications to your phone not expressly approved in  
this document could void your warranty for this equipment and void your  
authority to operate this equipment.  
For the best care of your phone, only authorized personnel should  
service your phone and accessories. Failure to do so may be  
dangerous and void your warranty.  
Note  
This phone guide contains important operational and safety  
information that will help you safely use your phone. Failure to  
read and follow the information provided in this phone guide may  
result in serious bodily injury, death, or property damage.  
104  
     
systems are adequately shielded from external RF signals. Also check with  
the manufacturer regarding any equipment that has been added to your  
vehicle.  
Maintaining Safe Use of and Access  
to Your Phone  
Consult the manufacturer of any personal medical devices, such as  
pacemakers and hearing aids, to determine if they are adequately shielded  
from external RF signals.  
Do Not Rely on Your Phone for Emergency Calls  
Mobile phones operate using radio signals, which cannot guarantee  
connection in all conditions. Therefore you should never rely solely upon  
any mobile phone for essential communication (e.g., medical  
emergencies). Emergency calls may not be possible on all cellular networks  
or when certain network services or mobile phone features are in use.  
Check with your local service provider for details.  
Always turn off the phone in healthcare facilities, and request  
permission before using the phone near medical equipment.  
Note  
Turning Off Your Phone Before Flying  
Turn off your phone before boarding any aircraft. To prevent possible  
interference with aircraft systems, the U.S. Federal Aviation Administration  
(FAA) regulations require you to have permission from a crew member to  
use your phone while the plane is on the ground. To prevent any risk of  
interference, FCC regulations prohibit using your phone while the plane is  
in the air.  
Using Your Phone While Driving  
Talking on your phone while driving (or operating the phone without a  
hands-free device) is prohibited in some jurisdictions. Laws vary as to  
specific restrictions. Remember that safety always comes first.  
Following Safety Guidelines  
Turning Off Your Phone in Dangerous Areas  
To avoid interfering with blasting operations, turn your phone off when in a  
blasting area or in other areas with signs indicating two-way radios should  
be turned off. Construction crews often use remote-control RF devices to  
set off explosives.  
To operate your phone safely and efficiently, always follow any special  
regulations in a given area. Turn your phone off in areas where use is  
forbidden or when it may cause interference or danger.  
Using Your Phone Near Other Electronic Devices  
Most modern electronic equipment is shielded from radio frequency (RF)  
signals. However, RF signals from wireless phones may affect inadequately  
shielded electronic equipment.  
Turn your phone off when you’re in any area that has a potentially explosive  
atmosphere. Although it’s rare, your phone and accessories could generate  
sparks. Sparks can cause an explosion or fire, resulting in bodily injury or  
even death. These areas are often, but not always, clearly marked. They  
include:  
RF signals may affect improperly installed or inadequately shielded  
electronic operating systems or entertainment systems in motor vehicles.  
Check with the manufacturer or their representative to determine if these  
Fueling areas such as gas stations.  
105  
 
Below deck on boats.  
Fuel or chemical transfer or storage facilities.  
means of measuring both wireless phone and hearing devices to determine  
usability rating categories for both.  
Areas where the air contains chemicals or particles such as grain,  
Ratings have been developed for mobile phones to assist hearing device  
users find phones that may be compatible with their hearing device. Not all  
phones have been rated for compatibility with hearing devices. Phones that  
have been rated have a label located on the box. Your MirroTM PLS-3810  
has an M4 and a T4 rating.  
dust, or metal powders.  
Any other area where you would normally be advised to turn off your  
vehicle’s engine.  
Never transport or store flammable gas, flammable liquids, or  
explosives in the compartment of your vehicle that contains your  
phone or accessories.  
Note  
These ratings are not guarantees. Results will vary depending on the user’s  
hearing device and individual type and degree of hearing loss. If a hearing  
device is particularly vulnerable to interference noise; even a phone with a  
higher rating may still cause unacceptable noise levels in the hearing  
device. Trying out the phone with your hearing device is the best way to  
evaluate it for your personal needs.  
Restricting Children’s Access to Your Phone  
Your phone is not a toy. Do not allow children to play with it as they could  
hurt themselves and others, damage the phone or make calls that increase  
your invoice.  
M-Ratings: Phones rated M3 or M4 meet FCC requirements for hearing aid  
compatibility and are likely to generate less interference to hearing devices  
than unrated phones. (M4 is the better/higher of the two ratings.)  
Using Your Phone With a Hearing Aid  
Device  
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to  
be more usable with a hearing device’s telecoil (“T Switch”or “Telephone  
Switch”) than unrated phones. (T4 is the better/higher of the two ratings.  
Note that not all hearing devices have telecoils in them.)  
A number of wireless phones have been tested for hearing aid device  
compatibility. When some wireless phones are used with certain hearing  
devices (including hearing aids and cochlear implants), users may detect a  
noise which can interfere with the effectiveness of the hearing device.  
Hearing aid devices may also be measured for immunity to interference  
noise from wireless phones and should have ratings similar to phones. Ask  
your hearing healthcare professional for the rating of your hearing aid. Add  
the rating of your hearing aid and your phone to determine probable  
usability:  
Some hearing devices are more immune than others to this interference  
noise, and phones also vary in the amount of interference noise they may  
generate. ANSI standard C63.19 was developed to provide a standardized  
Any combined rating equal to or greater than six offers excellent use.  
106  
   
Any combined rating equal to five is considered normal use.  
Any combined rating equal to four is considered usable.  
Caring for the Battery  
Thus, if you pair an M3 hearing aid with an M3 phone, you will have a  
combined rating of six for “excellent use.” This is synonymous for T ratings.  
Protecting Your Battery  
The guidelines listed below help you get the most out of your battery’s  
performance.  
It is further suggested you experiment with multiple phones (even those not  
labeled M3/T3 or M4/T4) while in the store to find the one that works best  
with your hearing aid device. Should you experience interference or find the  
quality of service unsatisfactory after purchasing your phone, promptly  
return it to the store where purchased for exchange or refund. More  
information about hearing aid compatibility may be found at: www.fcc.gov,  
www.fda.gov, and www.accesswireless.org.  
Recently there have been some public reports of wireless phone  
batteries overheating, catching fire or exploding. It appears that many, if  
not all, of these reports involve counterfeit or inexpensive, aftermarket-  
brand batteries with unknown or questionable manufacturing standards.  
The manufacturer is not aware of similar problems with manufacturer  
phones resulting from the proper use of batteries and accessories  
approved by the manufacturer of your phone. Use only manufacturer-  
approved batteries and accessories found through your phone’s  
manufacturer. Buying the right batteries and accessories is the best way  
to ensure they’re genuine and safe.  
Getting the Best Hearing Device Experience  
With Your Phone  
Do not disassemble or open crush, bend or deform, puncture or shred  
the battery.  
Do not modify or remanufacture, attempt to insert foreign objects into  
the battery, immerse or expose to water or other liquids, expose to fire,  
explosion or other hazard.  
To further minimize interference:  
Set the phone’s display and keypad backlight settings to ensure the  
minimum time interval (see also page 28):  
1. Press  
> Settings > Display > Backlight > Backlight Dim or  
Avoid dropping the phone or battery. If the phone or battery is dropped,  
especially on a hard surface, and the user suspects damage, take it to a  
service center for inspection.  
Backlight Off.  
2. Highlight the minimum time interval setting and press  
.
Improper battery use may result in a fire, explosion or other hazard.  
Do not short circuit a battery or allow metallic conductive objects to  
contact battery terminals.  
Position the phone so the internal antenna is farthest from your   
hearing aid.  
Move the phone around to find the point with least interference.  
Keep the metal contacts on top of the battery clean.  
Battery usage by children should be supervised.  
107  
 
Charging  
Radio Frequency (RF) Energy  
In order to avoid damage, charge the battery only in temperatures that  
range from 32° F to 113° F (0° C to 45° C).  
Understanding How Your Phone Operates  
Don’t use the battery charger in direct sunlight or in high humidity areas,  
such as the bathroom.  
The battery may need recharging if it has not been used for a long  
period of time.  
It’s best to replace the battery when it no longer provides acceptable  
performance. It can be recharged hundreds of times before it needs  
replacing.  
Your phone is basically a radio transmitter and receiver. When it’s turned  
on, it receives and transmits radio frequency (RF) signals. When you use  
your phone, the system handling your call controls the power level. This  
power can range from 0.006 watt to 0.2 watt in digital mode.  
Knowing Radio Frequency Safety  
The design of your phone complies with updated NCRP standards  
described below.  
Storing  
In 1991–92, the Institute of Electrical and Electronics Engineers (IEEE) and  
the American National Standards Institute (ANSI) joined in updating ANSI’s  
1982 standard for safety levels with respect to human exposure to RF  
signals. More than 120 scientists, engineers and physicians from  
Don’t store the battery in high temperature areas for long periods of  
time. It’s best to follow these storage rules:  
Less than one month:  
-4° F to 140° F (-20° C to 60° C)  
universities, government health agencies and industries developed this  
updated standard after reviewing the available body of research. In 1993,  
the Federal Communications Commission (FCC) adopted this updated  
standard in a regulation. In August 1996, the FCC adopted hybrid standard  
consisting of the existing ANSI/IEEE standard and the guidelines published  
by the National Council of Radiation Protection and Measurements (NCRP).  
More than one month:  
-4° F to 113° F (-20° C to 45° C)  
Disposal of Lithium Ion (Li-Ion) Batteries  
Promptly dispose of used batteries in accordance with local regulations.  
Never dispose of the battery by incineration.  
Do not handle a damaged or leaking Li-Ion battery as you can be  
burned.  
For safe disposal options of your Li-Ion batteries, contact your nearest  
authorized service center.  
Body-Worn Operation  
To maintain compliance with FCC RF exposure guidelines, if you wear a  
handset on your body, use the supplied or approved carrying case, holster  
or other body-worn accessory. If you do not use a body-worn accessory,  
ensure the antenna is at least 0.866 inches (2.2 centimeters) from your  
body when transmitting. Use of non-approved accessories may violate   
FCC RF exposure guidelines. Other accessories used with this device for  
Special Note: Be sure to dispose of your battery properly. In some areas,  
the disposal of batteries in household or business trash may be prohibited.  
108  
 
body-worn operations must not contain any metallic components and must  
provide at least 0.866 inches (2.2 centimeters) separation distance  
including the antenna and the user’s body.  
The highest reported SAR values of the MirroTM PLS-3810are:  
Cellular CDMA mode (Part 22):  
Head: 0.32 W/kg; Body-worn: 0.46 W/kg  
For more information about RF exposure, visit the FCC website at  
www.fcc.gov.  
PCS mode (Part 24):  
Head: 0.87 W/kg; Body-worn: 0.38 W/kg  
Specific Absorption Rates (SAR) for Wireless  
Phones  
FCC Radio Frequency Emission  
This phone meets the FCC Radio Frequency Emission Guidelines.  
The SAR is a value that corresponds to the relative amount of RF energy  
absorbed in the head of a user of a wireless handset.  
FCC ID number: V65SCP-3810.  
More information on the phone’s SAR can be found from the following FCC  
website: http://www.fcc.gov/oet/ea/.  
The SAR value of a phone is the result of an extensive testing, measuring  
and calculation process. It does not represent how much RF the phone  
emits. All phone models are tested at their highest value in strict laboratory  
settings. But when in operation, the SAR of a phone can be substantially  
less than the level reported to the FCC. This is because of a variety of  
factors including its proximity to a base station antenna, phone design and  
other factors. What is important to remember is that each phone meets  
strict federal guidelines. Variations in SARs do not represent a variation in  
safety.  
FCC Notice  
This device complies with Part 15 of the FCC Rules. Operation is subject to  
the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
Changes or modifications not expressly approved by the party responsible  
for compliance could void the user’s authority to operate the equipment.  
All phones must meet the federal standard, which incorporates a  
substantial margin of safety. As stated above, variations in SAR values  
between different model phones do not mean variations in safety. SAR  
values at or below the federal standard of 1.6 W/kg are considered safe for  
use by the public.  
This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the FCC  
Rules.  
Note  
109  
These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses  
and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio  
communications.  
Owner’s Record  
The model number, regulatory number, and serial number are located on a  
nameplate inside the battery compartment. Record the serial number in the  
space provided below. This will be helpful if you need to contact us about  
your phone in the future.  
However, there is no guarantee that interference will not occur in a  
particular installation.  
Model: MirroTM PLS-3810  
If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on,  
the user is encouraged to try to correct the interference by one or more of  
the following measures:  
Serial No.:  
User Guide Proprietary Notice  
Reorient the direction of the internal antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
T9 Text Input is licensed by Nuance Communications, Inc. and is covered  
by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and  
other patents pending.  
Consult the dealer or an experienced radio/TV technician for help.  
Industry Canada Notice  
Operation is subject to the following two conditions: (1) this device may not  
cause interference, and (2) this device must accept any interference,  
including interference that may cause undesired operation of the device.  
The term “IC” before the radio certification number only signifies that the  
Industry Canada technical specifications were met.  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003  
du Canada.  
110  
   
A. ONE (1) YEAR LIMITED WARRANTY: For a period of one (1) year  
from the date of original purchase, KCI will, at its option, either repair or  
replace a defective Product (with new or rebuilt parts/replacements).  
4B. Manufacturer’s Warranty  
B. LIMITED WARRANTY ON REPAIRED/REPLACED PRODUCTS:  
For a period equal to the remainder of the limited warranty period on the  
original Product or, on warranty repairs which have been effected on  
Products for 90 days after the date of its repair or replacement, whichever  
is longer, KCI will repair or replace (with new or rebuilt parts/replacements)  
defective parts or Products used in the repair or replacement of the original  
Product under the Limited Warranty on it.  
Your phone has been designed to provide you with reliable,  
worry-free service. If for any reason you have a problem with  
your equipment, please refer to the manufacturer’s warranty in  
this section.  
Proof that the Product is within the warranty period in the form of a bill of  
sale or warranty repair document that includes the date of purchase,  
Product serial number and the authorized dealer’s name and address, must  
be presented to obtain warranty service. This limited warranty is not  
transferable to any third party, including but not limited to any subsequent  
purchaser or owner of the Product. Transfer or resale of a Product will  
automatically terminate warranty coverage with respect to it.  
For information regarding the terms and conditions of service for  
your phone, please contact your wireless service provider.  
Manufacturer’s Warranty  
This limited warranty covers batteries only if battery capacity falls below  
80% of rated capacity or the battery leaks. Also this limited warranty does  
not cover any battery if (i) the battery has been charged by a battery  
charger not specified or approved by KCI for charging the battery, (ii) any of  
the seals on the battery are broken or show evidence of tampering, or (iii)  
the battery has been used in equipment other than the SANYO brand  
mobile phone for which it is specified.  
Manufacturer’s Warranty  
Kyocera Communications, Inc. (“KCI”) offers you, the original  
purchaser who has purchased the enclosed subscriber unit (“Product”) only  
from an authorized dealer in the United States, a limited warranty that the  
Product, including accessories in the Product’s package, will be free from  
defects in material or workmanship as follows:  
This limited warranty does not cover and is void with respect to the  
following: (i) Products which have been improperly installed, repaired,  
maintained or modified (including the antenna); (ii) Products which have  
111  
   
been subjected to misuse (including Products used in conjunction with  
hardware electrically or mechanically incompatible or Products used with  
software, accessories, goods or ancillary or peripheral equipment not  
supplied or expressly authorized by KCI for use), abuse, accident, physical  
damage, abnormal use or operation, improper handling or storage, neglect,  
exposure to fire, water or excessive moisture or dampness or extreme  
changes in climate or temperature; (iii) Products operated outside  
published maximum ratings; (iv) cosmetic damage; (v) Products on which  
warranty stickers or Product serial numbers have been removed, altered, or  
rendered illegible; (vi) customer instruction; (vii) cost of installation, set up,  
removal or reinstallation; (viii) signal reception problems (unless caused by  
defect in material or workmanship); (ix) damage the result of fire, flood,  
acts of God or other acts which are not the fault of KCI and which the  
Product is not specified to tolerate, including damage caused by  
mishandling and blown fuses; (x) consumables (such as memory cards,  
fuses, etc.); or (xi) any Products which have been opened, repaired,  
modified or altered by anyone other than KCI or a KCI authorized service  
center.  
DOES NOT COVER PRODUCTS SOLD “AS IS” OR “WITH ALL  
FAULTS”. KCI MAKES NO OTHER EXPRESS WARRANTY WITH  
RESPECT TO THE PRODUCTS. THE DURATION OF IMPLIED  
WARRANTIES, INCLUDING IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE IS LIMITED TO THE DURATION OF THIS EXPRESS  
WARRANTY.  
Some States do not allow the exclusion or limitation of incidental or  
consequential damages, or allow limitations on how long an implied  
warranty lasts, so the above limitations or exclusions may not apply to you.  
This limited warranty gives you specific legal rights, and you may have  
other rights which vary from State to State.  
To obtain warranty service, contact  
Kyocera Communications, Inc.  
Attention : Customer Services for Wireless Products  
Phone : 1-800-349-4478  
This warranty is valid only in the United States.  
Web : http://www.sanyowireless.com  
REPAIR OR REPLACEMENT, AS HERE IN ABOVE PROVIDED, IS  
YOUR SOLE AND EXCLUSIVE REMEDY FOR BREACH OF THE  
LIMITED WARRANTY. KCI SHALL HAVE NO LIABILITY FOR ANY  
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT  
NOT LIMITED TO LOSS OF PROFITS, LOST SALES, LOSS OF  
DATA, LOSS OF USE OF THE PRODUCT, OR ANTICIPATED  
PROFITS ARISING OUT OF USE OR INABILITY TO USE ANY  
PRODUCT (FOR EXAMPLE, WASTED AIRTIME CHARGES DUE  
TO THE MALFUNCTION OF A PRODUCT). THIS WARRANTY  
112  
This product contains NetFront Browser of ACCESS CO., LTD. ACCESS and NetFront  
are trademarks or registered trademarks of ACCESS CO., LTD. in Japan and other  
countries. This software is based in part on the work of the Independent JPEG  
Group.  
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any  
use of such marks by Kyocera Corporation is under license. Other trademarks and  
trade names are those of their respective owners.  
“SANYO” is a registered trademark of SANYO Electric Co., Ltd. and is used under  
license. KYOCERA is a registered trademark of Kyocera Corporation. Kyocera  
manufactures and markets the SANYO wireless line of products.  
Kyocera Communications, Inc. is a wholly-owned subsidiary of Kyocera  
International Inc.  
113  

Yamaha CDR400At User Manual
Sony CDX M1000TF User Manual
Sony CDX GT23 User Manual
Sonic Alert Oracle Telecommunications Billing Inegrator B31540 02 User Manual
Seagate BARRACUDA ST2000DL003 User Manual
Samsung SCH R640 User Manual
Samsung I7110 User Manual
Research In Motion Blackberry Cell Phone Curved 8520 User Manual
Philips SA3124 User Manual
Panasonic EB MX7 User Manual