Sanyo ECD T1540 User Manual

ECD-T1540  
SIRIUS SATELLITE RADIO OPERATING MANUAL  
VOLUME  
45W x 4  
MANU/SKIP  
S-MOD  
SAT  
LOUD/  
ENTER  
P. S C A N  
Full Panel Detachable  
High Power FM/AM Stereo Receiver  
Compact Disc Player  
ISO Mounting with Removable Trim Ring  
Sirius Function  
Remote Control Ready  
CD-R/RW Compatibility  
(English)  
SIRIUS OPERATION……………. 2~3  
1
SIRIUS MODE SELECTION ...........................…..(5)  
Press LOC/S-MOD button (5) to switch Category mode, Skip mode or normal. It is used as the  
selection of each:  
Normal  
Category mode  
Direct Tune  
Skip Channel mode  
When Category mode or Skip mode is engaged, the “CATEGORY” or “SKIP” function is turned  
on in the display. When Category mode or Skip mode is released, the “CATEGORY” or “SKIP”  
function is turned off. When Direct mode is engaged, “DIRECT” of alphanumeric display is turned  
on.  
Select Category and TUNE UP/DOWN within selected Category  
Use CAT button (7) or  
CAT button (6) to select desire Category and press  
BND/LOUD/ENTER button (2).  
In Category mode, stations can be tuned within the same category.  
-
When the user wishes to search by Category, press LOC/S-MOD button (5) can be pressed  
until it goes into Category search mode.  
-
-
Press CAT button (7) or  
To change channels, press LOC/S-MOD button (5) again to Normal mode, and then press  
MANU/SKIP or button (3) to select the channel up or down.  
CAT button (6) up and down to get to the desired category.  
The operation of skip channel function  
In Skip mode, pressing LOC/S-MOD button (5) for more than 3 seconds sets the SKIP channel  
mode. Details for set or release skip channel is as follows.  
Use MANU/SKIP  
or  
button (3) to be switched to SKIP channel set or release mode  
sequentially.  
-
-
Press BND/LOUD/ENTER button (2) to select skip or release the following channel. (If the  
channel was skipped, the “SKIP” icon will be displayed.  
Press LOC/S-MOD button (5) for more than 3 seconds again to return to basic mode  
automatically after 10 seconds.  
Note:  
In skip mode, use MANU/SKIP  
or  
button (3) to show skipped channels.  
How to direct tune  
1. In direct mode, display shows DIRECT and “000” channel number. (Hundred Digit flashing  
on/off)  
2. Use MANU/SKIP  
or  
button (3) to select hundred digit.  
3. Press LOC/S-MOD button (5) again to confirm entry of the hundred digit and the 10s digit is  
flashing on/off.  
4. Use MANU/SKIP  
or  
button (3) to select 10s digit.  
5. Press LOC/S-MOD button (5) again to confirm entry of the 10s digit and the 1s digit is  
flashing on/off.  
6. Press LOC/S-MOD button (5) again to confirm entry of the 1s digit.  
7. Press BND/LOUD/ENTER button (2) to direct tune.  
3
21605 Plummer Street  
Chatsworth, CA91311  
ECD-T1540. Issue Number 1.  
Printed in Hong Kong  
4

Toastmaster TCM10PWF User Manual
Sioux Tools 5266 User Manual
Siemens Cell Phone C60 User Manual
Seagate EE252 SERIES ST980817SM User Manual
Seagate BARRACUDA ST315320A User Manual
Seagate Backup Plus STCB3000900 User Manual
Samsung SGH p207 User Manual
Samsung Cell Phone GT P7510 User Manual
Roland BOSS DIGITAL RECORDER MICRO BR User Manual
Palm TreoTM User Manual