Samsung TwoStep™
( S C H - R 4 7 0
P O R T A B L E
M O B I L E
S e r i e s )
D U A L - B A N D
P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
Printed in Korea.
Licensed by Qualcomm Incorporated under one or more of the following patents:
U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and
other patents pending.
®
Nuance , VSuite™ and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the
United States and/or other countries.
®
Openwave is a registered Trademark of Openwave, Inc.
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
™
microSD and the microSD logo are Trademarks of the SD Card Association.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
®
1
SM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
2
FCC Hearing-Aid Compatibility (HAC) Regulations for
3
Section 1: Getting Started
This section explains how to start using your Samsung
TwoStep™ phone by activating your service and setting up your
Voicemail, and explains how this manual is put together.
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
Understanding this User Manual
highlight
UsetheNavigationkey(
effect onto a menu item or screen item of interest.
)tomoveahighlighting
The chapters of this manual generally follow the same order as
the menus and sub-menus in your phone. A robust index for
select
After “highlighting” a menu item or screen item,
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 130.
press the MENU-OK key (
save a highlighted menu item or screen field of
interest.
) to launch, access, or
Notes and Tips
➔
Used in place of “select” in long “drill down”
procedure steps.
Throughout this manual some text is set apart from the rest. In
this way, important information, quick methods for activating
features, to define terms, and more are emphasized. The
definitions for these methods are as follows:
Example: “...Settings
➔
Call Settings
➔
Call Answer...”
•
•
•
Notes — Explain alternative options within the current feature, menu,
or sub-menu.
Installing the Battery
Tips — Provide quick or innovative methods for performing functions
related to the subject at hand.
Note: Your phone comes packaged with a partially charged rechargeable standard
Li-Ion battery and travel adapter.
Important — Points out important information about the current
feature that could affect performance, or even damage your phone.
Getting Started
4
3. Place the battery cover over the battery (1) and press
Important!: You must fully charge the battery the first time you use your
lightly downward (2) until it clicks into place.
phone, otherwise you could damage the battery.
samsungmobile.com
1. Insert the top end of the battery first, matching the gold
contacts on the top of the battery to those inside of the
phone battery compartment.
Removing the Battery
1. Press and hold
to turn off the phone (if on).
2. Lightly press the bottom end of the battery down into the
phone until it slips into place.
5
2. Press up on the battery cover (1) and slide the cover
toward the top end of the phone. Lift the cover (2) up and
away from the phone, bottom end first.
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate your warranty and may cause
damage.
samsungmobile.co
Use the Travel Adapter
The travel adapter included
with your phone is a
convenient, light-weight
charger that rapidly charges
your phone from any 120/220
VAC outlet.
3. Lift the bottom of the battery up (1) and away (2) from the
phone.
1. Plug the large end of the Travel Adapter into a standard
120 VAC or 220 VAC wall outlet.
Important!: For connection to an electrical supply not located in North
America, you must use an adaptor of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
Getting Started
6
2. Insert the smaller end of the Travel Adapter into the
charger/accessory connector on the left side of your
phone.
A blinking empty battery icon (
indicate you have two to three minutes before the battery is too
low to operate the phone.
) and a tone sounding
If you continue to use your phone without charging its battery, the
phone will shut down.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
Turning Your Phone On
Correct
1. Open the flip on your phone, as shown.
2. Press
.
Incorrect
Note: As with any other radio-transmitting device, do not
touch the antenna while using your phone as this can
affect call quality and can cause the phone to operate
at a higher power level than is necessary.
Important!: You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
3. The phone begins searching for a
Low Battery Indicator
network signal.
Press
The battery indicator (
) in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
4. Once the phone finds a signal, the time,
date, and day appear at the top of the
display.
Five bars (
) indicate a full charge.
) indicates a near empty battery.
An empty battery icon (
7
5. You’re now ready to place and receive calls.
Listen to Voicemail
ᮣ
In standby mode, press and hold
or dial your own
mobile number to dial Voicemail. After connecting, you will
hear your voice greeting. You are prompted to enter your
password.
Note: If you are outside of your carrier’s coverage or roaming area (
), the
No Service icon (
) appears at the top of the phone’s display. If you
cannot place or receive calls, try later when service is available, or at
another location.
Turning Your Phone Off
Memory Card (Optional)
Your phone has a Memory Card slot on its right side, across from
the keypad. You can install a microSD card to provide
ᮣ
Press and hold
powers off.
for two or more seconds. Your phone
™
additional memory for storing files (such as, sound files and
photos) in your phone.
Note: If your phone is on and you press
for less than one second, the phone
will not power off. This prevents your phone from being turned off
accidentally.
Install a Memory Card
Setting Up Your Voicemail
1. Open the microSD cover on the right side of your phone.
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
Note: Once your Voicemail account has been set up, you can use the Voicemail
folder (under the Message menu) to view details of voice messages in your
Voicemail box.
1. In standby mode, press and hold
or dial your own
mobile number to dial Voicemail.
2. Follow the prompts in the new user tutorial to setup your
mail box.
Getting Started
8
2. Insert the memory card — label side facing up and smaller
end pointing toward the phone — into the memory card
slot.
2. Press the memory card into the slot until the card lock
releases.
3. Remove the memory card from the memory card slot.
5. Replace the microSD cover.
Correct
Incorrect
3. Press the memory card into the slot until the card locks
into place.
4. Replace the microSD cover.
Remove a Memory Card
9
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that will be displayed
when the phone is in use.
Note: The TwoStep phone supports the wireless headset, hands-free, dial-up
networking, A2DP, Phonebook Access, serial port, file transfer profiles
for Bluetooth® wireless technology. The TwoStep does not support all
Bluetooth OBEX profiles.
Features of Your Phone
•
Domestic and international voice and text messaging service (available
on participating networks).
Closed View of Your Phone
•
•
•
•
•
•
•
•
•
•
•
•
High speed data (CDMA 2000 1x Technology)
®
Bluetooth Wireless Technology (see Note)
Global Positioning System (GPS) Technology
Digital Assistant Tools
Picture (MMS) Messaging
Text (SMS) Messaging
Email Messaging
Built-in 1.3 Megapixel Digital Camera
Voice Dial
0
Music Player (MP3 — requires an optional Memory Card)
Stereo Speakers and 3.5 mm Headset Jack
Memory Card Slot (microSD™ — up to 8 Gb)
Features
1. Volume Key — In standby mode, lets you adjust the
incoming call ringer volume. When receiving a call, lets
Understanding Your Phone
10
you temporarily mute the ringer. In Music Player mode, lets
you browse available music selections or adjust music
playback volume.
7. Stereo Speakers — In Music Player mode, plays music
selections.
8. Headset Connector — Used to connect an optional headset
(for hands free operation and/or music playback) or an
optional TTY device.
2. Power Accessory Connector — Used to connect charging
/
accessories or optional accessory cables to your phone.
3. Camera Lens — The lens of your built-in camera.
9. Camera Key — In standby mode, lights the front display
backlight and launches the Camera feature of your phone.
In Camera mode, takes pictures.
4. Front Display — In standby mode, indicates the status of
your phone, including status icons, message indicators,
signal strength, and so on. In Music Player mode, lists
available music selections, indicates music playback
progress, shows music playback volume. In Camera mode,
shows camera viewfinder screen without icons.
10. microSD (Memory Card) Slot — Lets you install and remove
optional microSD Memory Card for add it on al image/
photo storage and for music storage.
5. Music Player Volume Jog Wheel — Music Player mode,
/
lets you browse available music selections, restart
playback or change to another selection, or lets you adjust
music playback volume.
6. Music Player Launch
/
Play Pause Key — In standby mode,
/
launches your phone’s Music Player, provided you have
installed an optional microSD Memory Card. In Music
Player mode, lets you pause and resume music playback.
11
Features
Open View (Front) of Your Phone
1. Earpiece — Lets you hear ringing and alert tones, alarm
tones, and the other parties to calls.
2. Main Display — Indicates the status of your phone,
including numbers dialed, feature and function screens,
status icons, message indicators and contents, signal
strength, and so on.
3. Navigation Key — In Menu mode, lets you scroll through
the phone menu options. In Standby mode, lets you access
preset functions and one user-defined function.
4. Left Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom left corner of the Main LCD.
5. Speakerphone Key — Press and hold to turn Speakerphone
mode On and Off.
6. SEND Key — Lets you place or receive a call. In standby
mode, press the key once to access the recent calls log.
7. CLR — In text entry mode, deletes characters from the
display. In menu mode, returns you to the previous menu
or screen.
0
Understanding Your Phone
12
8. Voicemail Key — Lets you speed dial your Voicemail
16. MENU-OK Key — In standby mode, launches the Main
Menu. When navigating through a menu, accepts the
highlighted choice in a menu.
account to review your voice messages.
9. Voice Recognition Key — In standby mode, press and hold
to launch Voice Recognition.
Command Keys
Functions for the soft keys are indicated by labels that appear in
the display above each soft key. There are two soft keys, Left
10. Microphone — Lets the other caller hear you clearly when
you are speaking to them.
(
) and Right ( ).
11. Special Function Keys — Enter special characters. Perform
Left Soft Key
various functions.
Some functions of the Left soft key (
) are as follows:
) to open the
12. Alpha-numeric Keys — Use these keys to enter numbers,
•
In standby mode, press the Msgs soft key (
letters, and symbols.
Messages menu.
•
When the Left soft key function is Edit, press the Edit soft key (
edit a Contacts entry.
) to
13. END Key — Ends a call. If you press and hold the END key,
the power goes On or Off. When you receive an incoming
call, press to send the call to voicemail.
Right Soft Key
Some functions of the Right soft key ( ) are as follows:
14. Music Player Key — Launches your phone’s Music Player,
provided you have installed an optional microSD Memory
Card.
•
•
•
In standby mode, press the Contacts soft key (
Contacts Find screen.
) to launch the
When the Right soft key function is Options, press the Options soft key
) and a pop-up menu appears.
When the Right soft key function is Back, press the Back soft key
) to back up one menu level.
15. Right Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom right corner of the Main Display.
(
(
13
OK Key
•
Press
the other call.
Music Player Key
to pick up a waiting call. Press
again to switch back to
•
•
•
In standby mode, press the OK key (
In a menu, press
) to launch the Main Menu.
to accept the highlighted selection.
to take a photo or to create a Picture
In camera mode, press
message.
In standby mode, pressing the Music Player key (
) launches
the Music Player for your phone, provided you have installed an
optional microSD Memory Card. (For more information, refer to
•
When the OK key function is Edit, press the Edit key (
) to edit a
Draft message.
Speakerphone Key
Clear Key
In standby mode or during a call, pressing and holding the
Speakerphone key ( ) places your phone in speakerphone
mode, allowing you to use your phone hands-free and/or to
include other nearby persons in a call. (For more information,
The CLR key (
) is used to erase or clear numbers, text, or
symbols from the display. You can also use the key to return to a
previous menu or to return to standby mode from any menu.
•
If you enter an incorrect character, briefly press
(and delete) the character.
to backspace
In speakerphone mode, pressing and holding the Speakerphone
•
•
To erase the entire sentence, press and hold
.
key (
) disables speakerphone mode.
To back up one menu level, briefly press
.
Send Key
End Key
The Send key ( ) is used to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
•
•
•
Press and hold the End key
Briefly press once to disconnect a call.
to return to standby mode from any menu, or to cancel the
to turn your phone on or off.
•
•
•
Press
Enter a number and briefly press
Briefly press in standby mode to display a list of recent calls to
and from your phone.
Press twice in standby mode to call the most recent number.
once to answer calls.
Press
to make a call.
last input.
•
Understanding Your Phone
14
Navigation Key
Understanding the Display Screens
Use the directional keys on the Navigation key (
) to browse
Main Display
menus, sub-menus, and lists. Each directional key also acts as a
shortcut to launch applications. (For more information, refer to
1. The top line of your
1
phone’s display contains
icons that indicate
Camera Key
network status, battery
In standby mode, press and hold the Camera key (
) —
2
power, signal strength,
located on the right side of your phone — to activate the camera
built into your phone.
information, refer to
In camera mode, pressing the Camera key (
) takes a picture
“Display Screen Icons”
With the phone closed, you can use the Camera feature by
pressing and holding the Camera key. Then press the Camera
key to take a picture.
3
2. The center portion of the display shows information such
as call progress information, messages, and photos.
3. The bottom line of the display shows current soft key
functions. The sample screen shows that pressing the Left
(Msgs) soft key will display the Messages menu, pressing
MENU-OK key ( ) will display the Main MENU, and
pressing the Right (Contacts) soft key will show the
Contacts Find screen.
15
Front Display
Dialogue Boxes
1. The top line of the front display
contains icons that indicate
network status, battery power,
1
2
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
•
•
•
•
•
•
•
Choice
–
Example: “Save Message?”
Reconfirm
–
Example: “Erase All Messages?”
Performing
Example: “Sending...” “Connecting...”
Completed
Example: “Message Saved”
Information
Example: “New Message”
Error
2. The center portion of the display shows the clock and
calendar and shows information about such occurrences
as incoming calls, new messages, and charging status.
–
–
Display Screen Icons
–
Your TwoStep phone can show you definitions of the icons that
appear on the top line of the displays.
–
Example: “System Error!”
To access the Icon Glossary:
Warning
ᮣ
In standby mode, press Menu
Phone Info Icon Glossary. A list appears showing the
icons that can appear on the top line of the displays.
(
), then select Settings
➔
–
Example: “Low Battery,” “Memory Full!”
➔
Backlights
Backlights illuminate the display and the keypad. When you press
any key or open the phone, the backlights come on. They go off
when no keys are pressed within a period of time set in the
Backlight menu.
Understanding Your Phone
16
•
View Later — This selection allows you to view the messages at a
later date.
Note: During a phone call, the display backlight dims and turns off after 7
seconds to conserve battery power, regardless of the Backlight setting.
Highlight the desired viewing option and then press
.
Adjust the Ringer
Your Phone’s Modes
In standby mode, press the Volume key (on the left side of the
phone) up or down.
Standby Mode
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into standby mode:
1. In standby mode, press the Volume key up or down to set
the call ringer volume as desired.
•
•
After you power the phone on.
When you press after a call or from within a menu.
Options are:
In standby mode, you will see the time, day, and date as well as
all phone status icons.
• Ringer Off
• Vibrate
• Low
• Medium
• Medium/High
• High
Place Calls in Standby Mode
• Low/Medium
• Vibrate/High
1. While in standby mode, enter a phone number, and press
to place a call.
When you are satisfied with the setting, press SET. Your phone
returns to standby mode.
2. Press
to return to standby mode.
Tip: You can also enter the Volume
>
Voice Calls sub-menu by pressing Menu
Receive Messages in Standby Mode
➔
Sounds
➔
Volume
➔
Voice Calls. Use the Volume key on the left side
of your phone to adjust the ringer volume setting.
You can receive messages in standby mode. An alert tone sounds
and a notification message appears in the display when a new
message arrives. The following call message options appear:
Note: The Vibrate icon ( ) appears in the display when the phone is in
Vibrate mode. The Vibrate/Ring icon (
) appears in the display when
•
View Now — This selection allows you to view the messages now.
the phone is in Vibrate/High mode.
17
Call Answer Mode
Vibrate Mode
You can choose to answer a call by pressing any key except
In standby mode, repeatedly press the Volume key (
) down
or
, by pressing only
, or by opening the phone’s flip.
until “Vibrate” appears in the display.
The Volume key is on the left side of phone.
Talk Mode
Speakerphone Mode
You can place and receive calls only when your phone is on.
While in a call, your phone is in talk mode. Press the Options soft
key to display a list of menu options. (For more information, refer
Speakerphone mode lets you use your phone hands-free and/or
share calls with others.
•
Entering Speakerphone Mode — In standby mode, press and hold
the Speakerphone key ( ).
Exiting Speakerphone Mode — In Speakerphone mode, press and
hold the Speakerphone key ( ).
Hands-free Mode
Enter/Exit Silent Mode
•
Silences the tones your keypad makes when you press a key.
To enter Silent Mode:
ᮣ
In standby mode, press and hold
. “Entering Silent
Hands-free mode lets you operate your phone remotely, without
touching it other than to turn it on or off.
Mode” briefly appears in the display and your phone
To place your phone in Hands-free mode, do one of the following:
returns to standby mode.
•
Connect an optional wired headset.
– or –
To exit Silent Mode:
ᮣ
While in Silent mode and standby mode, press and hold
•
Pair and connect an optional Bluetooth technology headset or hands-
. “Exit Silent Mode” briefly appears in the display and
your phone returns to standby mode.
Understanding Your Phone
18
Camera Mode
Lock Mode
Camera mode lets you take pictures with your phone’s camera.
In Camera mode, you can also adjust the resolution and
appearance of your pictures.
When the phone is in Lock Mode, restrictions are placed on
phone use. You can receive calls and messages, but cannot place
outgoing calls (except for emergency numbers) until you unlock
the phone. Lock Mode also restricts access to menus and the
Volume key. Unlock your phone by entering the lock code when
•
Entering Camera Mode — In standby mode, press and hold the
Camera key ( ) — on the right side of the phone.
Exiting Camera Mode — Press
•
.
Note: You can also enter Camera mode by pressing Menu
(
) and selecting
Multimedia
➔
Camera.
Input mode
Input mode determines how you enter text, numbers, and
symbols. While at any text entry screen, press the Left soft key,
then choose the input mode from the pop-up menu using the
Navigation key. Optional input modes are T9 Word Abc, ABC, 123,
,
Tip: You can cycle between T9 Word
,
Abc, and 123 by repeatedly pressing
and holding until the input mode label changes.
19
Section 3: Call Functions
This section explains how to make and answer calls. This section
also includes the features and functionality associated with
making or answering calls.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Making a Call — Number Entry Dialing
1. With the phone on, enter the number you wish to call using
the keypad.
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
2. Press
to place the call.
Dialing International Numbers
Call Another Country — Manual
Method
Dialing Emergency Numbers
To place an emergency call:
1. With the phone on, enter 911 using the keypad.
1. In standby mode, enter 011
(the three-digit exit code for
the United States).
2. Press
to place the call.
You can specify other numbers as emergency numbers using the
2. Enter the country code for the
country that you are calling.
Important!: Emergency number 911 is preset into your phone. You can dial
this number almost any time, even when the phone is locked or
restricted.
3. Enter the number that you
wish to call, then press
.
If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
Call Functions
20
Note: Puerto Rico and Canada are on the North American dialing plan.
Making calls to Puerto Rico and Canada is similar to making calls
within the United States, no unique country codes are necessary.
Tip: If you place most or all of your
international calls to numbers in the
same country, set-up the International
Dialing shortcut to dial that country’s
code for you. (For more information,
Call Another Country — Shortcut
Method
1. In standby mode, press and
Note: When you press
, your phone
hold
until a plus sign (+)
automatically replaces the second +
with the two-digit country code you
have selected for the International
Dialing shortcut.
appears in the display.
Note: When you press
, your phone
automatically replaces this + with
011, the three-digit exit code for the
United States.
3. Enter the number that you wish to call, then press
.
Manual Pause Calling
2. Enter the country code for the
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
country that you are calling, or
press and hold
until a
second plus sign (+) appears
in the display.
To manually call a number with pause(s) without storing it to your
Contacts:
1. Enter the number you wish to call.
21
2. Press the Options soft key. A pop-up menu containing the
The Contacts list displays the first few entries with names
matching the letters you entered.
following options appears in the display:
•
•
2-Sec Pause — P pause — A two-second pause stops the
calling sequence for two seconds and then automatically sends the
remaining digits.
3. Highlight the Contact you wish to call and press
Wait — W pause — A hard pause stops the calling sequence until
you press
.
3. Highlight the desired pause option.
4. To enter the highlighted pause into your number sequence,
Making a Call — Speed Dialing
press
.
Speed Dialing lets you quickly and easily dial any contact in your
Contacts list by using that contact’s location number in the list.
You can assign and change location (speed dial) numbers for
Note: If you select 2-Sec Pause, P appears in the display. If you select Wait,
W appears in the display.
5. Press
to call the number.
One-Touch Dialing
Making a Call — Contact Dialing
Speed Dial numbers 2 through 9 are special One-Touch dialing
numbers. You can call the phone numbers stored in your phone’s
Contacts list and assigned Speed Dial numbers 2 through 9 by
pressing and holding a single key.
You can store phone numbers and contact names in your phone’s
Contacts list. To call one of your Contacts, do the following:
1. Press the Contacts soft key. The Contacts Find screen
appears in the display.
Example: For Speed Dial number 3, press and hold the
key until the
name and number appear in the display and the number is dialed.
Call Functions
22
Two-Touch Dialing
Making a Call — Quick Search Dialing
Memory locations 10 through 99 are special Two-Touch dialing
locations.
Use the Quick Search feature to dial
any number stored in your Contacts
list by pressing the number keys that
correspond to the first few letters of
a Contact name. (For more
Example: For location number 13, briefly press
, then press and hold
until the name and number appear in the display and the number is
dialed.
Three-Touch Dialing
Quick Search Dialing a Contact
Memory locations 100 through 999 are special Three-Touch
dialing locations.
To find and dial a Contact, do the
following:
Example: For location number 113, briefly press
, briefly press
1. In standby mode, press the number keys that correspond
again, then press and hold
until the name and number appear
in the display and the number is dialed.
to the first few letters of the Contact name, as shown.
2. Press the Up navigation key.
The Contacts list screen
Pause Dialing From a Contacts Entry
•
If you speed dial a contact that contains (two-second) P pause(s)
simply wait for the pauses to pass and the dialing to complete.
appears showing the desired
Contact name, as shown.
•
If you speed dial a contact that contains (hard) W pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
3. If needed, use the Up and
Down navigation keys to
highlight the Contact you wish
to call.
23
4. Press
to call the highlighted Contact. (For more
“Say a Command” appears in the display and is
pronounced through the earpiece.
2. Say, “Call”.
Making a Call — Voice Dialing
You are prompted to “Say the name or #”.
Your TwoStep mobile phone includes state-of-the-art voice
recognition software that lets you dial numbers using your voice.
3. Speak clearly and say the name of a person in your
Contacts list, first name followed by last name.
Using Voice Dial
If the name is recognized, Voice Dial repeats the name and
dials the number.
Use the Voice Dial command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Voice Dial to dial any valid telephone number,
even numbers not stored in your Contacts list, by speaking the
individual digits in the number (Digit Dialing).
If Voice Dial is not sure which name you said, it displays a
choice list of up to three names and prompts you with “Did
you say?” followed by the first name on the list.
Voice Dialing Tips:
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
•
•
Wait for the beep before speaking.
Speak clearly at a normal volume, as if you were talking to someone
on the phone.
•
When saying a name, say the first name then the last name.
•
•
Press the Repeat soft key to say the name again.
Press the Settings soft key, then press the Exit soft key to exit
Voice Dial without dialing.
Dialing a Name
To dial a name, do the following:
1. In standby mode, press and hold
.
Call Functions
24
If the recognized name has multiple numbers stored for it
(that is, Home, Work, Mobile, and so on), Voice Dial
displays the possible choices and prompts you with
“Which number?”
If it recognizes the number, Voice Dial repeats and dials the
number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers and
prompts you with “Did you say?” followed by the first
number on the list.
5. Say one of the following number types:
4. Say “Yes” to confirm the number or “No” to hear the next
one, or use the keypad to select the correct number from
•
•
•
“
“
“
Home
Work
Mobile
”
”
”
Voice Dial dials the specified number.
Dialing a Number
•
•
To say the name again, press the Repeat soft key.
To exit Voice Dial without dialing, press
To dial a number using Voice Dial, do the following:
1. In standby mode, press and hold
.
Pause Dialing From a Contacts Entry
.
•
If you voice dial a contact that contains (two-second) T pause(s) simply
wait for the pauses to pass and the dialing to complete.
“Say a Command” appears in the display and is
pronounced through the speaker.
•
If you voice dial a contact that contains (hard) P pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
2. Say “Call”.
VoiceSignal prompts you to “Say the name or #”.
3. Speak clearly and say the telephone number of the person
you want to call. For example, say “7 8 1 5 5 5 6 2 0 0."
25
Answering a Call
Your phone notifies you of a call in the following ways:
Tip: You can set your phone to automatically answer calls or to answer calls
•
A ring tone sounds and/or your phone vibrates (Your phone provides
seven ring volume settings including: Ringer Off Vibrate Low Low/
Medium Medium Medium/High High, or Vibrate/High, and/or
,
,
,
Note: If you set the Auto Answer option to any value other than Off, the Auto
,
,
,
Answer icon ( ) displays.
different ring types to distinguish callers.)
•
A phone number (unless blocked by the caller) and a name appear in
the display (If the caller’s number and name are stored in your
Contacts list).
Adjusting the Call Volume
During a call, press the Volume key (
the you hear the other party to the call at the desired loudness.
The Volume key is on the left side of phone.
) Up or Down until
•
•
If the caller can’t be identified, Call from unavailable#, Call from
restricted number, or no number appears in the display.
Your phone continues to notify you of the call until one of the following
events occurs:
The In-Use Options Menu
You can access numerous menus and features while in a call.
– You answer the call.
Note: If the call is disconnected while you are accessing the In-Use Option,
the In-Use Option disappears from the display and the phone
eventually returns to standby mode.
– You ignore the call.
– You mute the ringer.
– The calling party ends the call.
– The call is sent to voicemail.
1. While in a call, press the Options soft key.
Answering an Incoming Call
The following menu items appear in the display:
ᮣ
Slide your phone open, if closed, or press
. The ring
•
Contacts — The Contacts Find screen appears in the display.
tone and/or vibration stop and the caller’s voice can be
heard in the earpiece.
•
• Recent Calls — The recent calls list appears in the display.
•
Send DTMF — Sends your phone number as DTMF tones.
Call Functions
26
•
•
Voice Privacy — Select Standard or Enhanced voice privacy.
Calls Log
The Calls log retains information about Outgoing, Incoming, and
Missed calls. You can also view times for your last call and the
time totals for all calls.
Do one of the following:
•
•
Select the desired sub-menu or feature.
Exit the menu by pressing
Review the Calls Log
1. In standby mode, press Menu ( ), then select Calls. The
following Calls logs and options appear in the display:
.
Tip: You can block/restore sound going to the other parties on this call by
pressing the Mute / Unmute soft key. This can reduce noise on
conference calls.
• Outgoing Calls
You can enable/disable Speakerphone mode by pressing and holding
. Speakerphone mode enables you to conduct a call hands-free and
to share a call with other people nearby. (For more information, refer to
• Incoming Calls
• Missed Calls
• All Calls
• Data Calls
• Call Timer
• Data Counter
Ignoring a Call
When you ignore an incoming call, the call is immediately
forwarded to your voice mail.
2. Select the Calls log that you wish to review or the function
you wish to access.
ᮣ
During an incoming call, press the Ignore soft key. The
caller is forwarded to your voice mail.
Note: In cases where there is a Contacts match for a Calls log entry, the
name associated with the number appears in the display instead of the
number.
Muting the Ringer
To mute the Incoming Call ringer, press the Volume key Up or
Down.
Note: Muting the ringer does not forward an incoming call to your voice mail.
27
Outgoing Calls
•
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
Your phone retains information about the last 90 outgoing calls
and stores them in the Outgoing calls log. You can review the
Outgoing calls log for the time and date of a call, as well as other
information.
4. Press the Msgs soft key to launch the Send Message
menu. The following options appear in the display:
•
Text Message — Lets you send a text message to the selected
number called.
Picture Message — Lets you send a picture message to the
selected number called.
Note: To quickly view your most recent calls, briefly press
in standby
mode. Up to 270 of your most recent outgoing, incoming, and missed
calls appear in the display.
•
1. At the Calls menu, select Outgoing Calls. A list of your
outgoing calls appears in the display.
5. Select the desired message type to compose a message.
2. Highlight a call, then press OPEN ( ) to view the Name
of the called party (if in the Contacts list), the number
dialed, the time and date the call was placed, and the
duration of the call (in minutes and seconds).
Incoming Calls
Your phone retains information about the last 90 Incoming calls
and stores them in the Incoming call log. You can review the
Incoming call log for the time and date of the call, as well as
other information.
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
1. At the Calls menu, select Incoming Calls. A list of your
•
•
Save — Save the number to your Contacts.
Details — Calls to Contacts Only — Shows the entry for the called
Contact.
Incoming calls appears in the display.
•
•
•
Erase — Erase the selected call from your Outgoing call log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Outgoing call log.
Call Functions
28
2. Highlight a call, then press OPEN ( ) to view the Name
of the caller (if in the Contacts list), the originating number,
the time and date the call was received, and the duration
of the call (in minutes and seconds).
Missed Calls
Your phone retains information about the last 90 missed calls
(calls that were never picked up) and stores them in the Missed
call log. You can review the Missed call log for the time and date
of the call, as well as other information.
3. Press the Options soft key. A pop-up menu containing the
1. At the Calls menu, select Missed Calls. A list of your
following options appears in the display:
missed calls appears in the display.
•
•
Save — Save the number to your Contacts.
Details — Calls from Contacts Only — Shows the entry for the
calling Contact.
2. Highlight a call, then press OPEN ( ) to view the Name
of the caller (if in the Contacts list), the originating number,
and the time and date the call was received.
•
•
•
•
Erase — Erase the selected call from your Incoming calls log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Incoming calls log.
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
•
•
Save — Save the number to your Contacts.
Details — Calls from Contacts Only — Shows the entry for the
calling Contact.
4. Press the Msgs soft key. The following options appear in
the display:
•
•
•
•
Erase — Erase the selected call from your Missed call log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Missed call log.
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
•
Text Message — Lets you send a text message to the selected
calling number.
•
Picture Message — Lets you send a picture message to the
selected calling number.
5. Select an option to perform its function.
29
4. Press the Msgs soft key. The following options appear in
•
•
•
•
Erase — Erase the selected call from your Calls log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Calls log.
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls
the display:
•
Text Message — Lets you send a text message to the selected
called number.
•
Picture Message — Lets you send a picture message to the
selected called number.
4. Press the Msgs soft key. The following options appear in
the display:
•
Text Message — Lets you send a text message to the selected
calling/called number.
5. Select an option to perform its function.
•
Picture Message — Lets you send a picture message to the
selected calling/called number.
All Calls
You can review all of the calls log entries (outgoing, incoming,
and missed calls) for the time and date of a call, as well as other
information.
5. Select an option to perform its function.
1. At the Calls menu, select All Calls. A list of all logged calls
Data Call
appears in the display.
Your phone retains information about the last 10 data calls and
stores them in the Data call log. You can review the Data call log
for the time and date of the call, as well as other information.
2. Highlight a call, then press OPEN ( ) to view further
information about the call.
3. Press the Options soft key. A pop-up menu containing the
1. At the Calls menu, select Data Call. A list of your data
following options appears in the display:
calls appears in the display.
•
•
Save — Save the number to your Contacts.
Details — Calls from Contacts Only — Shows the entry for the
calling/called Contact.
2. Highlight a data call, then press OPEN ( ) to view further
information about the call.
Call Functions
30
3. Press the Options soft key. A pop-up menu containing the
•
All Calls — View the duration of the total call, incoming, outgoing,
and data calls made on your phone since the last erasure.
Last Reset — View the time and date all timers were last reset.
Lifetime Calls — View the duration of all calls since your phone
was activated.
following options appears in the display:
•
•
•
•
•
•
Erase — Erase the selected call from your Data call log.
Lock Unlock — Blocks / permits erasure of this Call entry.
Erase All — Erase all calls from your Data call log.
Data Counter — Shows the amount of data Transmitted and
Received during this call, the Total amount of data exchanged since
the counters were last reset, and the total amount of data
exchanged since the phone was activated.
/
2. To reset a selected counter (except Last Reset and Lifetime
Calls), highlight the desired counter and press the Reset
soft key.
3. To reset all counters except Lifetime Calls, press the Reset
4. Select an option to perform its function.
All soft key.
Call Timer
4. To exit the Call Timer list, press
or
.
View the duration of your last call, total calls, and calls made
during the life cycle of you phone using the Call Timer feature.
Note: Although most call timers can be erased, the Lifetime call timer can
never be erased.
Note: Call Timer is not for billing purposes.
Data Counter
1. At the Calls menu, select Call Timer. The following timers
View the amount of Transmit data, Receive data, and Total data
transmitted or received since the last time you reset the data
counters, and the Lifetime amount of data transmitted or
received.
appear in the display:
•
•
Last Call — View the duration of your last call.
Outgoing Calls — View the duration of the total outgoing calls
made on your phone since the last erasure.
•
•
Incoming Calls — View the duration of the total incoming calls
received on your phone since the last erasure.
Roaming Calls — View the total calls duration on your phone
while roaming since the last erasure.
Note: Data Counter is not for billing purposes.
1. At the Calls menu, select Data Counter.
31
The following options appear in the display:
Roaming
•
•
•
Transmit — View the total amount of data transmitted by your
phone since the last reset.
Received — View the total amount of data received by your phone
since the last reset.
Total — View the total amount of data sent or received by your
phone since the last reset.
Last Reset — View the time and date all timers were last reset.
Lifetime Data Counter — View the total amount of data sent or
received by your phone since activation (Lifetime Data Counter
cannot be reset).
What is Roaming?
Roaming lets you use your TwoStep phone when you travel
outside of your Wireless Provider’s coverage area. The Roaming
icon (
) appears in the top line of the display when
Roaming is active, and extra charges may apply when making or
receiving calls.
•
•
Note: Some features may be unavailable while roaming. Roaming also
consumes additional power from the battery requiring more frequent
recharging. Contact your Wireless Provider for more information about
Roaming.
2. To reset a selected counter (except Last Reset and Lifetime
Data Counter), highlight the desired counter and press the
Reset soft key.
How Roaming Works
Roam Option lets you set roaming preferences if you move in and
out of your home network. The following roaming options are
available:
3. To reset all counters except Lifetime Data Counter, press
the Reset All soft key.
•
Home only — Your phone is available for normal operation only in the
designated coverage area.
4. To exit the Call Timer list, press
or
.
•
Automatic — Your Wireless Provider’s Preferred Roaming List (PRL) of
networks is used to acquire service. If no preferred networks are
found, any digital system is acquired.
Note: Although most data counters can be erased, the Lifetime Data Counter
can never be erased.
Call Functions
32
Section 4: Menu Navigation
This section explains the menu navigation for your phone. It also
includes an outline of all the available menus associated with
your phone.
4. Press the Back soft key to return to the previous menu.
Return to the Previous Menu
Press the Right soft key Back to return to a previous menu.
•
Menu Navigation
Access the menus and sub menus in your phone using the
•
When Back does not appear in the display, press
to return to the
previous menu.
navigation key (
shortcut.
) and soft keys (
), or use a
Navigation Key Shortcuts
In standby mode, press a navigation key to launch the key’s
corresponding application.
1. In standby mode, press Menu ( ). The first of several
menus appears in the display.
My Images*
Note: More than one menu may appear in your display. This setting can be
modified in the Display/Menu Style menu.
SM
Settings
easyedge
Tip: You can launch any of the Main Menus by using a voice command — In
standby mode, press and hold
until the phone prompts, “Say a
command.” Say “Go to” followed by a Main Menu name into the
microphone. For example, Say “Go to easyedge” to access the
easyedgeSM menu.
Ringer Type
2. Use the navigation key to browse through the menus.
* My Images can be customized. Press Menu
Phone Settings Shortcut Key
(
), then select Settings
➔
3. To enter the menu or sub menu that appears in the display,
➔
.
press
.
33
to the first few letters of the menu or menu item name, as
shown.
Navigate Using a Shortcut
You can also access menus and sub menus using menu
numbers. After pressing Menu ( ), press the menu number to
go directly to the menu or sub menu of your choice. Before you
can navigate using a shortcut, you’ll need the menu or sub-menu
number that you wish to access.
2. Press the Down navigation key. The
Menu List screen appears showing
the matching menus and/or menu
items, as shown.
1. In standby mode, press Menu ( ).
3. Select the desired menu or menu
item. The associated screen appears
in the display.
2. Press the number of the menu, sub menu, and so on for
the feature that you wish to access.
Example: Press Menu ( ), then press
,
. This takes you to the
Tools menu (Menu 8), and then to the Alarm Clock (sub menu 3).
Navigate Using Quick Search
Use the Quick Search feature to find a
menu or menu item by pressing the
number keys that correspond to the first
few letters of menu or menu item name.
Quick Search Accessing a Menu
To find and access a menu or menu item, do the following:
1. In standby mode, press the number keys that correspond
Menu Navigation
34
Section 5: Entering Text
This section outlines how use your phone’s keypad and text entry
modes to enter letters, numbers, and symbols and punctuation.
This section also describes how to use the T9 predictive text
entry system to reduce the number of key strokes needed to
enter text.
•
Symbols — Using the phone keypad, enter a symbol into your
message by pressing the number above the symbol in the Symbols
pop-up window.
Changing the Text Entry Mode
The current text entry mode (T9 Word Abc ABC, 123, or Symbols)
is usually indicated as the label for the Left soft key. To change
the text entry mode while composing a text message:
,
,
Available Text Entry Modes
Text messages can be made up of letters, numbers, and
symbols. You can use the following text entry modes to simplify
text entry:
ᮣ
Repeatedly press and hold
to toggle between Abc,
123, and T9Word modes.
•
T9 Word — Press each phone key only once to enter each letter of a
Or, do the following:
word that you’re spelling. T9 WORD mode letter options are:
–
–
–
T9 Word — Enter initial capital letters
T9 WORD — Enter all upper case letters
T9 word — Enter all lower case letters
1. Press the Left soft key.
2. Highlight one of the following text entry modes:
• T9Word
• Abc
•
Abc — Enter letters by repeatedly pressing each phone key until the
desired character (as shown on the key) appears in the display. ABC
mode letter options are:
• ABC
–
–
–
Abc — Enter initial capital letters
ABC — Enter all upper case letters
abc — Enter all lower case letters
• 123
• Symbols
3. Press
.
•
123 — Enter numbers by pressing the corresponding keys on the
phone keypad.
35
Changing Capitalization
As you press each key, the
displayed letters change, and
a list of available alternative
words or letter sequences
appears in the lower half of the
screen.
You can toggle the T9 Word and Abc mode capitalization between
entering all capital letters (T9WORD
/
ABC), entering all lower-case
letters (T9word
/
abc), and entering initial capital letters (T9WORD
/
ABC).
ᮣ
To toggle text entry capitalization, repeatedly press
until the preferred capitalization shows as the Left soft key
When you complete the key
label.
sequence, T9 Word recognizes
®
Using T9 Mode
that the most commonly used
T9 Word recognizes commonly used words for a particular
sequence of key presses and inserts the word into your message.
T9 Word is much faster than the traditional method of text entry
(Abc) and requires only one key press per letter of the word that
you’re spelling.
word for the key sequence you just pressed is “Samsung.”
Selecting Alternative Words
If more than one word shares the
same key sequence, T9 Word
displays the most commonly used
word in the text you are entering.
1. While composing a text message, press the Left soft key,
then select T9Word
.
T9 Word lists any available,
alternative words or letter sequences
in the lower half of the text entry
screen.
2. For practice, enter the word “Samsung” by pressing each
of the following keys only once:
S
A
M
S
U
N
G
Entering Text
36
ᮣ
To replace the currently displayed text with an alternative,
Using Abc Mode
highlight the preferred alternative and press
.
1. While composing a text message or memo, press the Left
soft key, then select Abc or ABC
.
Note: To enter a space, press the
key. To enter a period, press the
2. Enter characters while in Abc mode by pressing a key
repeatedly until the desired character appears in the
display.
Adding Words to T9 Word
The T9 Word dictionary may not
contain an obscure word, such as the
latest technical jargon or slang. If you
find you cannot enter a particular
word in T9 Word mode, you can add
the word to the T9 Word dictionary.
Example: Press
once for “G” and twice for “H”.
3. Pause briefly and the displayed character is accepted and
inserted into your message or memo.
4. To enter a space, press
. To enter a period, press
.
1. While composing message
text or a text memo, press the
Note: To enter a space, press the
key. To enter a period, press the
Left soft key, then select Add T9 Word. The Add T9 Word
screen appears in the display.
Entering Numbers
Enter numbers into a text message while in 123 mode.
Note: The Add T9 Word screen is locked into Abc text entry mode.
1. While composing a text message or memo, press the Left
soft key, then select 123
2. Enter your new word using Abc text entry key sequences.
.
2. Enter numbers while in 123 mode by pressing the key
labeled with the corresponding number that you wish to
insert into your message or memo.
3. Press
. “T9 Word is Added” appears in the display and
you are returned to the message/memo text entry screen.
37
Entering Symbols
In Symbols mode, you can use your phone’s keypad to enter
symbols (such as “@” or “%”) or punctuation (such as “?” or “!”)
into a text message.
1. While composing a text message memo, press the Left
soft key, then select Symbols. The first of three symbol
screens appears in the display.
2. Use the Prev and Next soft keys to page through the other
symbols, if desired.
3. Press the key that corresponds with the symbol that you
wish to enter.
Example: Press
for an exclamation point (!).
4. Repeat these steps to insert additional symbols into your
message or memo.
Entering Text
38
Section 6: Understanding Your Contacts
This section details how you can manage your daily contacts by
storing their names and numbers in your Contacts list. You can
have your Contacts entries sorted by name.
Tip: You can also access the Find option from standby mode, by pressing the
Contacts soft key.
• Add New Contact — Add a number or Email address to your
Contacts.
Contacts
Up to 500 entries can be stored in Contacts. Each entry can have
up to five associated phone numbers and one Email address.
Each phone number can be up to 32 digits in length, including 2-
more information), and associated names can be up to 32
characters in length. You can assign the Speed Dial numbers of
your choice for each entry. You can also mark your Contacts list
as Restricted to prevent unauthorized viewing. (For more
• Speed Dial — Assign a Contacts entry to a Speed Dial number.
• Group — Review, send messages to, add Contacts to, or rename
four out of your five groups. (For more information, refer to
• Memory Info — Display used and available memory for Contacts
entries.
2. Select the option of your choice.
Note: You can also press the keypad number key that corresponds to the
menu option number.
Tip: Speed Dial One-Touch Dialing Two-Touch Dialing, and Three-Touch
,
Dialing allow you to call numbers stored in Contacts faster.
Finding a Contacts Entry
Open Contacts
Shortcut Key Method
1. In standby mode, press Menu ( ), then select Contacts
The following options appear in the display:
• Find — Find a Contacts entry by name.
.
If you’ve stored a name entry in Contacts, Find allows you to find
it quickly by entering the first few letters of a Contact’s name.
1. In standby mode, press the Contacts soft key.
39
–
Send Pic Msg — Create and send a Picture message to the selected
Contact.
The Find screen appears in the display with the Go To field
highlighted, followed by the first few names in your
Contacts list.
–
–
Call — Dial the number associated with the name.
Send Name Card Via Bluetooth — Send selected Contacts to
another Bluetooth device.
Tip: You can also access the Find screen from standby mode by pressing
Menu
(
), then selecting Contacts
➔
Find.
Select the desired option to access its sub-menu appears in the display.
Voice Method
2. Enter the first few characters of a name as entered in
Contacts. For example, if you saved the name as “Amy
Smith”, begin the search by pressing (for “A”).
Use the VoiceSignal Lookup command to view contact
information for any named contact stored in your Contacts list by
saying the name.
As you enter letters, the names of the closest matches
appear in the display.
Note: The Lookup command shows the requested Contact information in the
display but does not dial a phone number for the contact.
3. When the desired entry is listed in the display, use the Up/
To look up information for a specific contact:
Down navigation keys to highlight the entry.
1. In standby mode, press and hold
to launch
•
•
•
•
Press
Press the Edit soft key to add or change information for this entry.
Press VIEW ) to show information about the entry.
Press the Options soft key. The following options appear in the
display:
to dial the number associated with the name.
VoiceSignal.
“Say a Command” appears in the display and is
(
pronounced through the speaker.
2. Say “Lookup”.
–
–
–
New Contact — Add a new entry to Contacts.
VoiceSignal prompts you to “Say the name.
”
Erase — Erase the name and associated information.
Send Txt Msg — Create and send a text message to the selected
3. Speak clearly and say the full name of the person you want
Contact.
to call, exactly as it is entered in your Contacts list.
Understanding Your Contacts
40
–
Send Name Card Via Bluetooth — Send the select Contact’s
information to another Bluetooth device.
•
•
If VoiceSignal recognizes the name you said, the Contact entry
information for that name appears in the display.
Select the desired option.
If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “Did you say?” followed by the first name on the list.
Quick Search Method
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
the list. (For more information, refer to “Choice Lists” on
page 66.)
1. In standby mode and with Quick Search enabled, press the
first few numeric keys that correspond to the letters of the
Contact’s name.
•
•
To say the name again, press Repeat
.
Example: To search for “Sally” you would enter 725
.
To exit VoiceSignal without dialing, press Settings and press Exit
.
5. The contact information for the name you selected appears
2. Press the Up navigation key. A list of Contact names that
begin with letters corresponding to the number keys you
pressed appears in the display.
in the display.
•
•
To dial the default number associated with the name, press
.
To remove this entry from your Contacts list, press the Erase soft
key.
3. Highlight the searched for Contact.
•
•
To call the Contact, press
To view the Contact, press
.
•
•
To add or change information for this entry, press EDIT
(
).
.
To access the following options, press the Options soft key.
Adding a New Contacts Entry
You can use either of two methods to add an entirely new entry to
Contacts.
–
–
–
Send Txt Msg — Create and send a text message to the selected
Contact.
Send Pic Msg — Create and send a picture message to the selected
Contact.
Call — Dial the number associated with the Contact name.
41
Dial Method
Menu Method
1. Using the keypad, enter the number you wish to add to
1. In standby mode, press Menu
(
), then select Contacts
your Contacts.
➔
Add New Contact.
2. Press the Save soft key. The following options appear in
the display:
The Add New Entry screen appears in the display with the
Name field highlighted.
• Create New — Lets you create a new Contacts entry.
• Update Existing — Lets you add the number you entered to an
existing Contacts entry.
3. Highlight one of the following fields:
3. Select Create New
.
• Mobile
• Home
• Work
• Pager
• Email
• Group
• Ringtone
• Fax
The Create New screen appears in the display showing the
following icons:
Mobile
Pager
Home
Fax
Work
4. Select the number type that matches your new entry.
4. Enter a phone number or Email address in the highlighted
5. Use the keypad to enter a name to associate with the
field.
Contacts entry.
5. Repeat steps 3 and 4 as needed.
6. Press SAVE
(
) to save the entry.
6. Press
to save the new entry.
Understanding Your Contacts
42
–
–
Wait — A hard pause (waits for input from you).
Editing a Contacts Entry
Editing Contacts Name and Numbers
Select the desired option.
5. When you’re finished changing the Contacts entry:
•
•
To save your changes, press
.
2. Use the Navigation key to highlight the entry and press
To discard your changes, press . You are prompted to confirm
exiting without saving your changes. Press the Yes soft key to
discard your changes.
VIEW
(
). The View Contact screen appears in the display
showing the highlighted entry’s information.
Add Pauses to Contacts Numbers
3. Use the Navigation key to review the information for the
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
entry that you wish to change, then press EDIT
(
). The
Edit Contact screen appears in the display.
4. Use the Navigation key to highlight the particular
information you want to add or change.
•
Wait — Stops the calling sequence until the phone receives further
input.
•
•
Press
Press and hold
highlighted field.
Press the Options soft key.
The following options pop-up in the display:
to backspace and delete numbers or letters.
to clear all numbers or letters in the
•
2-Sec Pause — Stops the calling sequence for two seconds, then
sends the remaining digits.
•
–
Set Speed Dial Remove Speed Dial — Assign/remove a speed dial
/
Note: You can enter multiple 2-Sec Pauses to extend the length of a pause.
For example, two consecutive 2-Sec Pauses cause a total pause time
of four seconds. Keep in mind that pauses count as digits towards the
32-digit maximum.
–
Set as default — Set the number the phone will dial when Contacts
dialing or speed dialing.
43
To add pauses to a Contacts entry number, do the following:
1. Find the Contacts entry associated with the number you
want to include one or more pauses. (For more
2. If you stored the number using Wait(s), find and dial the
number from Contacts and wait for the appropriate prompt
from the dialed number.
3. Press
to resume dialing the number.
Edit an Existing Email Address
3. Press Options. The following pause options appear in the
display:
2. Highlight the desired Contacts entry, then press the Edit
• 2-Sec Pause — A 2-second pause after which dialing resumes.
• Wait — A hard pause (waits for input from you).
4. Select the pause option of your choice to add it to the
soft key.
The Edit Contact screen appears in the display.
3. Highlight the Email field.
number sequence.
5. When you’re finished entering information, press
to
store the number to Contacts.
5. Press
to save your changes.
Pause Dial from Contacts
1. If you stored the number using 2-second pause(s), simply
find the Contacts entry, highlight the number, and press
Assigning a Ringtone to a Contacts Entry
When you assign a ringtone to a Contacts entry, the phone plays
the ringtone that you assigned to the entry when you receive a
call from that Contact instead of the ringtone currently assigned
to Voice Calls.
Understanding Your Contacts
44
Saving a Number After a Call
Once you finish a call, you can store the caller’s number to your
Contacts list.
2. Highlight the desired Contact, then press the Edit soft key.
The Edit Contact screen appears in the display.
Note: If the call was incoming and Caller ID information was unavailable,
then the Save option is also unavailable.
3. Highlight the Ringtone field, then press the Set soft key.
1. Press
to end your call. The call time, length of call,
phone number, and name of the party (if available) appear
in the display.
The Contact Tone menu appears in the display showing the
following options:
• My Ringtones
2. Press the Save soft key. The Save menu appears in the
• My Sounds
display showing the following options:
4. Select the desired option. The My Ringtones or the My
• Create New — Lets you create a new Contacts entry.
• Update Existing — Lets you add the number you entered to an
existing Contacts entry.
Sounds file list appears in the display.
5. Select the ringtone or sound that you wish to assign to the
3. Follow the instructions in the upcoming sections
depending on whether the number is a new entry or you
wish to add it to an existing entry.
Contacts entry.
The Edit Contact screen re-appears in the display with the
name of the selected file in the Ringtone field.
Create a New Entry
1. At the Save menu, select Create New
6. Press
to save the ringer assignment to the selected
.
Contacts entry.
45
The Create New screen appears in the display showing the
3. Select the desired Contacts entry. The following number
following number type options:
type options appear in the display:
Mobile
Pager
Home
Fax
Work
Mobile
Pager
Home
Fax
Work
2. Select the number type that matches your new entry.
Number types that are already assigned a number show
the number instead of the number type label.
4. Select the desired unassigned number type. The Contacts
entry information appears in the display with the new
number posted in the appropriate number type field.
4. Press
. The new entry is saved to your Contacts list.
Add to an Existing Entry
5. Press
again to save your changes to the existing entry.
1. At the Save menu, select Update Existing. The Update
Existing screen appears in the display showing your
Contacts list with the Go To field and the first Contacts
entry highlighted.
Speed Dial
A Contacts entry’s Speed Dial number corresponds to the number
keys you press to speed dial one of that entry’s numbers.
2. Find the Contacts entry to which you want to add the new
Example: To speed dial the Contacts entry assigned to Speed Dial 5, press
and hold
, (1-touch dialing).
To speed dial the Contacts entry assigned to Speed Dial 35, press
then press and hold , (2-touch dialing).
To speed dial the Contacts entry assigned to Speed Dial 235, press
, press , then press and hold , (3-touch dialing).
Understanding Your Contacts
46
You can assign one or more Speed Dial numbers to a Contacts
entry during new entry creation or by editing an existing entry.
4. Select an Unassigned Speed Dial number or enter an
Unassigned Speed Dial number in the Go To field using the
keypad.
Assignment During Entry Creation
To assign a Speed Call number to a new Contacts entry number,
do the following:
Important!: Do not enter Speed Call numbers 1, 411, 611, or 911. These
numbers are already assigned to Voicemail (001), to Information
(411), to Customer Care (611), and to emergency use (911).
enter a name for the entry.
5. Press SET ( ). You are prompted to confirm your Speed
Dial number assignment.
2. After entering the Contacts entry name, do not press
.
6. Press the Yes soft key to save your Speed Dial assignment
Instead, highlight a number field.
and return to the Add New Entry screen.
3. Press the Options soft key. The following options appear in
Note: Press the No soft key to discard the assignment and return to the
the display:
Speed Dial screen.
• Set Speed Dial — Assign a speed dial number.
• Set as default — Set the number the phone will dial when
Contacts dialing, speed dialing, or voice dialing.
• Wait — A hard pause (waits for input from you).
• 2-Sec Pause — A 2-second pause after which dialing resumes.
7. Press
to save your changes.
Assignment to an Existing Entry
Select Set Speed Dial. The Speed Dial screen appears in the
2. Highlight the desired entry.
display.
3. Press Edit. The Edit Contact screen appears in the display.
47
4. Highlight the number field you wish to assign a Speed Dial
6. Select Remove Speed Dial. “Remove speed dial?” pops up
number.
in the display to confirm your desire to remove the entry.
7. Press the Yes soft key to remove the Speed Dial
assignment. “Speed Dial Removed” pops up in the display,
and you are returned to the Edit Contact screen.
Changing a Speed Dial Location
Contacts Groups
2. Highlight the desired entry.
Contact Groups let you easily send messages to multiple,
selected Contacts. You can also use Groups to find Contact
entries and to add/remove Contacts names in a Group or to
create or rename a Group.
3. Press Edit. The Edit Contact screen appears in the display.
4. Highlight the number field marked by the Speed Dial icon
(
).
Add Contacts Entry to a Group
5. Press the Options soft key. The following options appear in
Using Add New/Edit Contact Option
the display:
To add a Contact to a Group using either the Add New Contact
option or the Edit Contact option, do the following:
• Remove speed dial — Unassign the current speed dial number.
• Set as default — Set the number the phone will dial when
Contacts dialing, speed dialing, or voice dialing.
• Wait — A hard pause (waits for input from you).
• 2-Sec Pause — A 2-second pause after which dialing resumes.
Group.
2. Highlight the Group field, then press the Set soft key.
Understanding Your Contacts
48
The Select Group screen appears in the display showing
• Colleague
• Family
• Friends
Groups similar to the following:
• No Group
• Business
• Colleague
2. Highlight a Group, then press the Options soft key. The
following options popup in the display:
• Family
• Friends
• Send Txt Msg — Send a text message to the selected Group.
• Send Pic Msg — Send a picture message to the selected Group.
• Rename — Change the name of the selected Group.
• Erase — Delete the selected Group, and send the member
Contacts back to No Group.
3. Select the Group to which you want to assign the selected
Contact.
You are returned to the Add New Entry
and the selected Group name populates the Group field.
4. Press to save your changes.
/Edit Contact screen
• Add — Add one or more Contacts to the selected Group.
3. Select Add. The Add Contacts screen appears in the display
showing a list of Contacts entries.
4. Do one of the following:
Using Group Add Option
•
Use the Navigation key to highlight an entry you want to add to the
The Add option lets you add one or more existing Contacts to a
Group.
group, then press MARK
check box.
(
). A check mark appears in the entry’s
1. In standby mode, press Menu
Group
(
), then select Contacts
Repeat as needed to check all the desired Contacts.
Press the Mark All soft key.
➔
.
•
The Group List screen appears in the display showing
Note: To unmark a marked Contact, highlight the Contact and press MARK to
clear the check mark.
Groups similar to the following:
• No Group
• Business
49
5. When you have marked the Contacts you want to add to
the group, press Done. “Contact added to group” appears in
the display, followed by the selected Group list including
the added Contacts.
Rename a Group
The Rename option lets you change the name any of the Groups,
except No Group.
1. In standby mode, press Menu
Group. The Group List screen appears in the display.
2. Highlight the Group name other than No Group that you
wish to change, then press Options Rename
(
), then select Contacts
➔
Remove Contacts Entry from a Group
1. In standby mode, press Menu
Group. The Group List screen appears in the display.
2. Highlight the Group (other than No Group) from which you
want to remove a Contact, then press VIEW ).
(
), then select Contacts
➔
.
➔
The Rename Group screen appears in the display.
(
A list of the Contacts assigned to the selected Group
appears in the display.
4. When you have completed your changes to the Group
name, press SAVE
Group Renamed” appears in the display followed by the
Group List screen showing your renamed Group.
(
).
3. Highlight the Contact you wish to remove.
“
4. Press the Remove soft key. You are prompted to confirm
the removal of the selected Contact.
Add a New Group
5. To remove the selected Contact from this Group and return
it to No Group, press the Yes soft key.
The New option lets you add Groups.
1. In standby mode, press Menu
Group. The Group List screen appears in the display.
(
), then select Contacts
To keep the selected Contact in this Group, press the No
➔
soft key.
2. Press the New soft key. The New Group screen appears in
the display.
Understanding Your Contacts
50
2. Highlight the desired entry, press the Options soft key, then
select Erase. The phone prompts you to confirm the
erasure.
4. When you have completed entering the new Group name,
press SAVE
(
). “Group Saved” appears in the display
3. To confirm erasure of the selected Contact, press the Yes
followed by the Group List screen showing your new
soft key. To retain the Contact, press the No soft key.
Group.
Memory Info
Erase a Group
The Memory Info menu option lets you view the amount of
memory you have used to store Contacts entries, as well as the
memory remaining to store more Contacts entries.
The Erase option lets you delete a Group, thus freeing you to
reassign the Contacts formerly in the Group.
ᮣ
In standby mode, press Menu
Memory Info
(
), then select Contacts
1. In standby mode, press Menu
Group. The Group List screen appears in the display.
2. Highlight the Group that you wish to delete, press the
Options soft key, then select Erase
(
), then select Contacts
➔
.
➔
The Memory Info Contacts screen appears in the display
showing the Total amount of memory in your phone, the
amount of memory Used to store Contacts entries, and the
remaining (Free) for Contacts entries.
.
You are prompted to confirm the Group erasure.
3. To confirm erasure of the Group, press the Yes soft key. To
retain the Group, press the No soft key.
Deleting a Contacts Entry
51
Section 7: Messaging
This section explains how to send or receive different types of
messages. This section also describes the features and
functionality associated with messaging.
Tip: To launch the Create Txt Msg screen using a voice command — In
standby mode, press and hold
until the phone prompts, “Say a
command.” Say “Send Text” into the microphone. You are then prompted
to say a Contact name or a number for the first recipient of the
message.
Types of Messages
Your phone is able to send and receive Text and Picture
messages to compatible phones and devices. Text messages can
be up to 160 characters in length.
2. Enter the phone number or
Email address of the recipient,
then press
. The Text: field
Note: Available memory is shared between all messages. You can store up to
100 messages. However, the exact number is dependent upon
message length.
appears in the display.
3. Enter the text content of your
message using the keypad.
Create and Send Text
Messages
1. In standby mode, press the
Msgs soft key, then select
4. Press the Options soft key to complete the message text
and set message send options. The following options
appear in the display:
Send Message
➔
Text
Message. The Create Txt Msg
screen appears in the display
showing the To: list.
• Edit Send To — Edit the recipient’s number or email address.
• Add Quick Text — Insert pre-composed text in your message.
• Save As Draft — Save the message to your Draft folder.
Messaging
52
• Priority Level — Choose Urgent or Normal
.
Reply With Copy, Save Quick Text, Lock, Add To Contacts, Message
Info, or Extract.
• Validity Period — Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
Time.
•
View Later — Saves the message to your Inbox, where you can view
it later, then returns your phone to standby mode.
• Deferred Delivery — Select the Date and Time you want this
message to be delivered.
Select your choice.
Receive Messages While in a Call
• Enh. Delivery Ack — Choose On or Off — Requests confirmation
when your message is received.
When you receive a message while in a call, New Message
appears in the display along with the closed envelope icon
• Add To Contacts — Save the recipient’s number or Email address
as a Contacts list entry.
(
). The date and time of the message also appear in the
display along with the following options:
5. Once you’re finished entering your message, press SEND
•
•
View Now — Opens the message, where you have the option to
Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,
Message Info, or Extract.
(
).
Receive Text Messages
When you receive a message in
standby mode, the ringer sounds
(unless turned off) and New Message
appears in the display along with the
View Later — Saves the message to your Inbox, where you can view
it later, and returns your phone to call mode.
Select the preferred option.
View a Text Message Now
closed envelope icon (
). The
date and time of the message also
appear in the display along with the
following options:
1. After you select the View Now option, the new text
message appears in the display.
2. While viewing your message press the Options soft key.
The following options appear in the display:
•
View Now — Opens the message,
where you have the option to Forward,
• Forward — Send a copy of this message to another recipient.
53
• Reply With Copy — Compose and send a reply message to the
originator of the received message and include a copy of the
original message.
Send Picture Messages in Camera Mode
Picture messages can be sent to recipients with compatible
phones or devices. You can even accompany a Picture message
with a voice memo or preloaded sound.
• Save Quick Text — Save the text in this message as a new Quick
Text.
• Lock
/
Unlock — Block/permit erasure of the highlighted
Tip: You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate Send to field of the
Picture message composer.
message.
• Add To Contacts — Save the sender’s number to your Contacts.
• Message Info — Shows message delivery status, addressee, size,
1. In standby mode, press and hold the Camera key (
).
and so on.
The camera viewfinder screen appears in the display.
• Extract — Lets you call the originator of the highlighted message.
2. Using the display as a viewfinder, when the image that you
3. Select an option to perform its function.
wish to send appears in the display, press TAKE
(
) to
take a picture.
Note: For more information about using the camera feature in your phone,
View a Text Message Later
1. In standby mode, press the Msgs soft key, then select
Inbox. The Inbox screen appears in the display.
2. Select the new message. The new text message appears
in the display.
Messaging
54
3. Press SEND
(
) to save the
6. Press the Down navigation key until the Text: field is
highlighted, then enter the message text using the keypad.
picture and begin the picture
message delivery process. The
Create Pic Msg screen then
appears in the display with the
Send To: list highlighted.
7. Your new picture appears in the PIC: field.
8. If you wish to insert a sound into your Picture message,
highlight the Sound: field and do the following; otherwise,
proceed to step 10.
4. Enter the phone number or
Email address of the recipient
of the Picture message, then
•
Press the Sounds soft key. The My Sounds screen appears in the
display showing the following options:
press
.
–
Record New — Record a new memo to insert into the message.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts
,
Groups, and Recent Calls, and Online Album. These options allow you to
Note: You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
find and add recipients to the Send To: list.
5. The Subject: field appears in
the display. Enter a subject for
the Picture message using the
–
Audio files list — Select from the list of previously recorded voice
memos and preloaded audio files on your phone.
Select an option, a sound file, and insert the sound into your message.
To exit the pop-up menu without inserting a sound, press
9. Press the Options soft key to complete the message text
.
and set message send options.
55
The following options appear in the display:
Send Picture Messages in Standby Mode
•
•
•
•
•
Preview — View the picture as the recipient will see it.
Add Quick Text — Add pre-composed text to your message.
Save As Draft — Save the message to your Draft folder.
Send Picture messages to recipients with a compatible phone or
other device, and accompany the Picture message with a voice
memo, ring tone, or downloaded melody.
Priority Level — Choose Urgent Normal, or Low.
,
Tip: You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate Send To field of the
Picture message composer.
Validity Period — Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
Time
.
1. In standby mode, press the
• Deferred Deliv. — Lets you specify a Date and Time when the
message will be delivered.
Msgs soft key, then select
Send Message
Message
➔
Picture
•
Delivery Ack — Choose On or Off — Requests confirmation when
your message is received.
.
•
•
•
Remove Pic — Remove the picture from your message.
The Create Pic Msg screen
then appears in the display
showing the To: list.
Remove Sound — Remove the sound file from your message.
Add To Contacts — Save the recipient’s number or Email address
as a Contacts list entry.
Select the desired option.
10. Press SEND
(
) to send the message. “Pic Msg Sending”
Tip: To launch the Create Pic Msg screen using a voice command — In
standby mode, press and hold
until the phone prompts, “Say a
appears in the display and a progress bar indicates the
send status.
command.” Say “Send Picture” into the microphone. You are then
prompted to say a Contact name or a number for the first recipient of the
message.
2. Enter the phone number or Email address of the recipient
using the keypad, then press
.
Messaging
56
•
If you want to include a new picture, press the Camera soft key.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts
,
Groups Recent Calls, and Online Album. These options allow you to find
,
Note: For more information about using the camera feature in your phone,
and add recipients to the Send To: list.
3. The Subject: field appears in
the display. Enter a subject for
the Picture message using the
•
Press
to add the highlighted picture to your message.
You are returned to the Create Pic Msg screen with the
selected picture in the Pic: field.
7. If you wish to insert a sound into your Picture message,
use the Down navigation key to highlight the Sound: field
and do the following; otherwise, proceed to step 8.
4. Press the Down navigation key
until the Text: field is
•
Press the Sounds soft key. The My Sounds screen appears in the
display showing the following options:
highlighted, then enter the
–
Record New — Record a new memo to insert into the message.
message text using the keypad. (For more information,
Note: You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
5. Press the Down navigation key until the Pic: field is
highlighted, then press the Picture soft key. A photo gallery
–
Audio files list — Select from the list of previously recorded voice
memos and preloaded audio files on your phone.
of thumbnail images appears in the display.
6. Highlight a picture to be added to your message, then do
Select an option, a sound file, and insert the sound into your message.
To exit the pop-up menu without inserting a sound, press
.
the following:
•
If you want, press the View soft key to expand the highlighted
picture to full-screen size.
57
8. Press the Options soft key to complete the message text
and set message send options. The following options
appear in the display:
Receive Picture Messages
When you receive a Picture Message
in standby mode, the ringer sounds
(unless turned off) and New Message
appears in the display along with the
closed envelope icon ( ).
• Preview — View the picture as the recipient will see it.
• Add Quick Text — Add pre-composed text to your message.
• Save As Draft — Save the message to your Draft folder.
The date and time of the message
also appear in the display along with
the following options:
•
Priority Level — Choose Urgent, Normal, or Low.
• Validity Period — Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
•
View Now — Retrieves and opens the
Time
.
message, where you have the option to
• Deferred Deliv. — Lets you specify a Date and Time when the
message will be delivered.
Reply, Forward, Delete, Save Text, Save Pic, or Save Msg.
View Later — Saves the message to your inbox, where you can view
it later, then returns your phone to standby mode.
•
• Delivery Ack — Choose On or Off — Requests confirmation
when your message is received.
Select the desired option.
• Remove Pic — Remove the picture from your message.
View a Picture Message Later
1. In standby mode, Msgs soft key, then select Inbox. The
Inbox appears in the display.
• Remove Sound — Remove the sound file from your message.
• Add To Contacts — Save the recipient’s number or Email address
as a Contacts list entry.
Select an option to invoke its function.
2. If the new picture message is not highlighted, select the
new message. “Connecting” appears in the display
followed by “Retrieving” and a progress bar indicating that
the message is downloading to your phone.
9. Press
to send the message. “Pic Msg Sending”
appears in the display and a progress bar indicates the
send status.
Messaging
58
3. Once a Picture message has been downloaded to your
phone, the new Picture message appears in the display. If
the message includes a sound file, the phone begins
playing it.
• Forward — Send a copy of this message to another recipient.
• Save Sound — Save the sound file included in this message to the
My Sounds folder.
• Save Pic — Save the picture included in this message to the My
Images folder.
• Save Quick Text — Save the text in this message as a new Quick
Text.
Note: For more information on viewing and managing received picture
• Lock Unlock — Block/permit erasure of the highlighted
/
View a Picture Message Now
message.
1. After you select the View Now option, “Connecting
”
• Add To Contacts — Save the sender’s number to your Contacts.
appears in the display followed by “Retrieving” and a
progress bar indicating that the message is downloading
to your phone.
• MessageInfo — Shows message delivery status, addressee, size,
and so on.
• Extract — Calls the sender of the received message.
4. Select an option to invoke its function.
2. After the Picture message has downloaded, an alert
sounds, and the new Picture message appears in the
display. If the message includes a sound file, the phone
begins playing it.
Note: For more information on received picture message options, see
Message Boxes
3. While viewing your message press the Options soft key.
Your phone stores messages in any one of five message boxes.
The subsections that follow describe each message box in detail.
The following options appear in the display:
Inbox
• Play Again — Play the sound file included in the picture message
again.
Received messages of all types (except Voicemail) are stored in
the Inbox.
• Reply — Compose and send a reply message to the originator of
the received message.
59
1. In standby mode, press the Msgs soft key, then select
• Message Info — Shows message delivery status, addressee, size,
and so on.
Inbox. A list of incoming messages appears in the display.
• Extract — Calls the sender of the received message.
Tip: While in a call, press Options, then select Message to open the Messages
4. Select an option to invoke its function.
menu.
Managing Inbox Messages
2. Select the message that you wish to view. The contents of
1. In standby mode, press the Msgs soft key, then select
Inbox. A list of incoming messages appears in the display.
the highlighted message appear in the display.
3. While viewing your message press the Options soft key.
2. Highlight a message in the list.
The following options appear in the display:
3. Press Erase to remove the highlighted message from the
• Play Again — Pic Msg — Play the sound file included in the
picture message again.
Inbox.
4. To access other options, press the Options soft key. The
• Forward — Send a copy of this message to another recipient.
following options appear in the display:
• Reply With Copy — Compose and send a reply message to the
originator of the received message and include a copy of the
original message.
• Reply — Compose and send a reply message to the originator of
the received message.
• Erase — Pic Msg — Delete the picture from this message.
• Reply With Copy — Compose and send a reply message to the
originator of the received message and include a copy of the
original message.
• Save Quick Text — Save the text in this message as a new Quick
Text.
• Save Pic — Pic Msg — Save the picture in this message into the
• Forward — Send a copy of this message to another recipient.
My Images folder.
• Lock Unlock — Block/permit erasure of the highlighted
/
• Lock Unlock — Block/permit erasure of the highlighted
/
message.
message.
• Add To Contacts — Save the sender’s number to your Contacts.
• Erase Inbox — Delete all unlocked messages from the Inbox.
• Add To Contacts — Save the sender’s number to your Contacts.
Messaging
60
• MessageInfo — Shows message delivery status, addressee, size,
and so on.
• Lock Unlock — Block/permit erasure of the highlighted
/
message.
5. Select an option to perform its function.
• Add To Contacts — Save the recipient’s number to your Contacts.
• MessageInfo — Shows message delivery status, addressee, size,
and so on.
Outbox
Your phone stores messages in the Outbox, regardless of
whether the message was successfully transmitted. Verify if and
when a message or Email was successfully received by enabling
the Delivery Ack feature.
• Extract — Calls recipient of this message.
4. Select an option to perform its function.
Messages and Lock Mode
Review Messages in the Outbox
Your phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code.
1. In standby mode, press the Msgs soft key, then select
Outbox. Your list of sent messages appear in the display.
Managing Outbox Messages
2. Highlight a message that you wish to review, then press
1. In standby mode, press the Msgs soft key, then select
Outbox. Your list of sent messages appear in the display.
OPEN
(
).
3. While viewing your message, press the Options soft key.
2. Highlight a message, then press Erase to remove the
The following options appear in the display:
highlighted message from the Outbox.
• Play Again — Pic Msg — Play the sound file included in the
picture message again.
3. Press the Options soft key. The following options appear in
the display:
• Forward — Send the highlighted message to another recipient.
• Erase — Pic Msg — Delete the picture from this message.
• Forward — Send the highlighted message to another recipient.
• Save Quick Text — Save the message text as Quick Text for
insertion into other messages.
• Resend — Re-send the highlighted message to the original
recipient.
61
• Lock
/
Unlock — Block/permit erasure of the highlighted
3. Compose your message using the keypad, then press the
Options soft key and select Save As Draft. A confirmation
message appears in the display and your message is
saved to the Drafts box.
message.
• Add To Contacts — Save the recipient’s number to your Contacts.
• Erase Outbox — Delete all unlocked messages from the Outbox.
• Message Info — Shows message delivery status, addressee, size,
and so on.
View and Edit Draft Messages
1. In standby mode, press the Msgs soft key, then select
Drafts. A list of any draft messages that you’ve saved
appears in the display.
4. Select an option to perform its function.
Draft Box
Messages in the Draft Box are those that have been composed
but never sent. You can return to the Draft Box at any time to
view, edit, or send a draft message.
2. Highlight a message that you wish to view or edit, then
press EDIT
(
). The Create Text Msg Create Pic Msg
/
Create a Draft Message
screen appears in the display showing the To: list.
1. In standby mode, press the Msgs soft key, then select Send
3. Enter or change the recipient’s number and/or Email
address and the message Text (Txt Msg) or Subject and
Text (Pic Msg) using the keypad. (For more information,
Message
Text Msg
➔
Text Message
/
Picture Message. The Create
/
Create Pic Msg screen appears in the display
showing the To: list.
2. Enter the phone Number or Email address of a recipient,
4. Press the Options soft key to complete the message and
set message send options. The following options appear in
the display:
then press
.
• Edit Send To — Txt Msg — Change, add, or remove recipients
from this message.
Messaging
62
Managing Draft Messages
• Preview — Pic Msg — View your message as the recipient(s) will
see it.
1. In standby mode, press the Msgs soft key, then select
Drafts. A list of any draft messages that you’ve composed
appears in the display.
• Add Quick Text — Insert pre-composed text into your message
text.
• Save As Draft — Save the message to your Drafts box.
2. Highlight a message.
• Priority Level — Choose Urgent or Normal
.
• Validity Period — Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
Time.
3. To remove the highlighted message from the Drafts box,
press the Erase soft key. You are prompted to confirm
erasure of the highlighted draft message.
• Deferred Delivery — Lets you specify a Date and Time when the
message will be delivered.
•
•
To erase this draft message, press the Yes soft key.
• Enh. Delivery Ack — Choose On or Off — Requests confirmation
when your message is received.
To keep this draft message in your Drafts box, press the No soft
key.
• Remove Pic — Pic Msg — Remove the picture file currently
4. For other options, press the Options soft key. The following
included in your message.
options appear in the display:
• Remove Sound — Pic Msg — Remove the sound file currently
included in your message.
• Send — Send the highlighted message to the original recipient, if
the recipient’s number and/or Email address is included with the
draft message.
• Add To Contacts — Save the recipient’s number or Email address
to your Contacts.
• Lock Unlock — Block/permit erasure of the highlighted
/
5. Select an option to perform its function.
message.
• Add To Contacts — Save the recipient’s number and/or Email
6. When you have completed composing your message,
address to your Contacts.
press SEND
(
).
• Save Quick Text — Save the message text as Quick Text for
insertion into other messages.
63
• Erase Drafts — Delete all unlocked draft messages.
2. Highlight a voice message.
3. Press or to call your voice mailbox and listen to
the message.
5. Select an option to perform its function.
Voicemail
Messages in your voice mailbox are logged in the Voicemail box
of the Messages menu. Open the Voicemail box to view the
Callback # (if available), Urgency, and other details of the
Voicemail message.
Note: You can also press and hold
to dial your voice mailbox.
Erase Messages
Using Erase Messages, you can erase all of the messages in
each of your boxes from one convenient location.
Listen to Voicemail Now
Once you’ve received a new voicemail message, you have the
option to either:
Note: This function erases all messages in a selected box. To delete a single
message, open the box from the Messages menu, highlight a message,
open the message if you want, then press Erase to delete it.
•
Listen Now — Calls your voice mailbox and allows you to listen to
your messages.
1. In standby mode, press the Msgs soft key, then select
•
Listen Later — Returns you to standby mode where you can later
choose to call your mailbox and review your messages.
Erase Messages
.
Select an option to perform its function.
The following options appear in the display:
Listen to Voicemail Later
• Inbox — Deletes all unlocked messages stored in the Inbox.
• Outbox — Deletes all unlocked messages stored in the Outbox.
• Drafts — Deletes all unlocked messages stored in the Drafts box.
If you choose to review your voicemail messages at a later time:
1. In standby mode, press the Msgs soft key, then select
Voicemail. The Voicemail screen appears in the display,
showing the number of new voicemail messages received
and the date and time the latest message was received.
• AllMessages — Deletes all unlocked messages stored in all of the
message boxes, except Voicemail.
Messaging
64
2. Select the messages that you wish to delete. You’re
prompted to confirm the erasure of all messages in the
selected box or in all boxes.
• Callback # — Choose whether to include a callback phone
number with your outgoing messages, and enter the number to be
included.
• Signature — Choose whether to include a text signature in
outgoing message text, and enter the text to be included.
3. To delete the messages, press the Yes soft key. To cancel
• Reminder — Select whether and how often you will hear and/or
deleting the messages, press the No soft key.
feel a reminder that you have received a message (Once Every 2
,
Message Settings
Minutes Every 15 Minutes, Off).
,
Use the Msg Settings sub-menus to define general settings and
2. Select the desired option to enter the highlighted option’s
text message settings.
sub-menu.
General Message Settings
1. In standby mode, press the Msgs soft key, then press Msg
Editing and Entering Quick Text
1. In standby mode, press the Msgs soft key, then select Msg
Settings
➔
General.
Settings
appears in the display.
2. To create a new Quick Text:
Press New
➔
General
➔
Quick Text. The Quick Text sub-menu
The following options appear in the display:
• Auto Save — Choose whether your messages are saved
automatically when you exit them (On Off, Prompt).
,
•
.
• Auto Erase — Choose to receive (On) or not receive (Off) a
warning message when you delete a message.
Tip: You can also create new Quick Text by viewing/editing an Outbox or
Drafts message and using the Save Quick Text option in the Options
• Quick Text — Edit your pre-composed messages, which can then
be inserted into new messages.
• Voicemail # — Edit or view your Voicemail number.
•
Enter/change the text content of your Quick Text using the keypad.
• Entry Mode — Choose the default method for entering text into
messages (T9 Word Abc, ABC, 123).
,
65
•
Once you’re finished entering your Quick Text, press OK. The Quick
Text menu appears in the display with your new Quick Text
highlighted.
• Auto Scroll
—
On/Off — With Auto Scroll On, the full content of a
text message automatically rolls upward on the display, one screen-
full at a time.
3. To change a Quick Text:
2. Select the desired option to enter the highlighted option’s
sub-menu.
•
Highlight a Quick Text you want to change, then press EDIT. (You
cannot change the pre-defined Quick Text included with your
phone.)
Picture Message Settings
1. In standby mode, press the Msgs soft key, then select Msg
Note: You cannot change or erase pre-loaded Quick Texts.
Settings
➔
Picture Message. The following options appear
in the display.
•
Enter/change the text content of your Quick Text using the keypad.
• Auto Receive — On/Off — With Auto Receive On, Picture
messages automatically download and display as they are
received. With Auto Receive Off, you are prompted to download
Picture messages.
4. To erase a Quick Text:
•
Highlight a Quick Text you want to erase, then press Erase. You are
prompted to confirm erasure of the highlighted Quick Text.
• Signature — Create a signature, which can be included at the
bottom of outgoing Picture message text.
•
To erase the highlighted Quick Text, press Yes. To keep it, press No
.
Text Message Settings
2. Select the desired setting to enter the highlighted option’s
1. In standby mode, press the Msgs soft key, then select Msg
Settings Text Message. The following options appear in
sub-menu.
➔
the display:
• Auto View
—
On/Off — With Auto View On, the full content of a
text message appears in the display as the messages is received.
• Signature — Create a signature, which can be included at the
bottom of outgoing message text.
Messaging
66
Section 8: Music Player
This section explains how to use your Music Player to:
Bluetooth headset (such as the optional Samsung SBH700 or
SBH500.) (For information on available accessories, contact your
Wireless Carrier.)
•
•
Play individual music files.
Create, play, and manage Playlists of music files.
Launching the Music Player
This section also explains how to customize your Music Player to
suit your music playback preferences.
Note: Before launching the Music Player, you must install a microSD™
Finally, this section details how to load music files onto a
microSD™ Memory Card.
Using Your Music Player
With the Flip Closed
You can use your Music Player to play music files that you have
transferred onto an optional microSD™ Memory Card using a
personal computer. (For information on loading music files on a
1. In standby mode, press and hold the
Play / Pause key ( ), located below
the front display. The Music Player Now
Playing list appears in the front display.
You can launch the Music Player and play music files with the flip
open or closed.
2. To play a music file, turn the Jog Wheel
on the outside of the flip to highlight
the file in the Now Playing list, then
Your TwoStep’s Music Player can play music in the following
Digital Audio Formats:
• Unprotected AAC and AAC+ • MP3 • WMA and WMA Pro
press
. The Music Player screen
Your Music Player can play music through the phone’s stereo
speakers, through stereo headphones, through a stereo headset
(such as the optional Samsung AAEP404), or through a stereo
appears in the front display and the
selected file begins playing.
67
• All — Lists all music files on the Memory Card and lets you play
individual music files or play multiple music files by creating a
temporary music playlist.
Note: You can also press the Volume key on the left side of the phone Up or
Down to highlight a music file.
• Artists — Lists artist names for music files on the Memory Card
With the Flip Open
and lets you play one or more music files by a selected artist.
1. In standby mode, press the
Music Player key ( ). The
Music Player screen appears
in the main display.
• Albums — Lists album titles for music files on the Memory Card
and lets you play one or more music files from a selected album.
• Playlists — Lists any playlists you have saved and lets you create,
save, and manage playlists.
3. Select the preferred Library option. A list of music files,
2. For information on selecting
and playing music files, refer
artists, albums, or playlists appears in the display.
If a list of artists, albums, or playlists is showing, select the
preferred artist, album, or playlist. A list of music files
appears in the display.
Tip: After launching the Music Player with the flip open, you can close the flip
without interrupting music playback.
4. Highlight a music file, then:
Using the Music Library
•
•
•
To play the file, press the Play soft key.
To select the file for playing or other options, press MARK
(
).
To select and apply any of the following options to the highlighted or
marked music file(s), depending the displayed music file list, press
the Options soft key:
2. Press the Library soft key. The Library menu appears in the
display showing the following options:
–
Mark All — Marks all listed music files for playing, removal, or
• Now Playing — Music Player mode only — Indicates number of
music files currently playing. Select this option (or press the Back
soft key) to return to the Music Player screen.
assignment of player settings.
Music Player
68
–
Add Songs — Lets you select music files in the All songs screen to
add to the Now Playing list.
–
–
During music playback, press Left to begin playing a previous file in the
list, press Left and hold to return to an earlier passage in the current
file; press Right to begin playing a succeeding file in the list, and press
Up to return to the Now Playing list.
Also during music playback, rotate to the left to reduce playback
volume, or rotate to the right to increase playback volume.
–
–
Add to Playlist — Adds this file to a selected Playlist.
Move to Another List — Moves the selected song from the current
Playlist to another Playlist.
–
Remove From List — Removes this file from the current list, but not
from the Memory Card.
•
Volume key:
–
–
–
Erase — Removes this file from the Memory Card and from all lists.
With the Now Playing list showing, press Up and Down to browse
through the list of music files.
During music playback, press Down to reduce playback volume, or
press UP to increase playback volume.
Song Info — Lists the title, artist, album, genres, copyright
information, time length, file size, and bit rate of the highlighted music
file.
–
Select the desired Option.
Flip Open
Music Player key
mode, press to launch the Music
Player.
Music Player Controls
Flip Closed
•
(
): In standby
•
Launch
/
Play Pause key:
/
–
–
–
In standby mode, press and hold to launch
the Music Player.
With the Now Playing list showing, starts
playback of the highlighted music file.
During music playback, press to pause/
resume playback.
•
Volume key
–
:
To play a music file louder, press the
Volume key Up.
To play a music file softer, press the
Volume key Down.
–
•
Navigation key:
•
Navigation
With the Now Playing list showing, rotate
to browse through the list of music files.
/
Volume wheel:
–
–
–
To pause/resume playing a music file, press
.
–
To stop playing a music file, press the Down navigation key.
To skip play to an earlier music file in the selected list, press the Left
navigation key.
69
–
–
To skip play to a later music file in the selected list, press the Right
navigation key.
To return to the selected list and choose another music file to play,
press the Up navigation key.
•
With your phone powered off, insert the Memory Card into your
•
•
Power your phone on.
When the Memory Card icon (
) appears in the display, remove
•
•
Library soft key — Returns you to the Library screen.
Options soft key — Shows the following sub-menus and options:
the Memory Card from your phone. (For more information, see
–
–
–
–
–
–
Play Mode — Lets you change the play mode from Normal, Shuffle,
Repeat One, Repeat All, or Shuffle Repeat All.
Add to Playlist — Moves you to the Playlists menu to let you add a
selected music file to a playlist.
Remove From List — Deletes a selected music file from the Now
Playing list or the current Playlist.
Visual Supplement — Lets you change the Music Player visualization
to Simple View, Equalizer, Lyrics, or Album Art.
Memory Info — Displays the Memory Usage screen which lists
Memory Card usage and availability amounts.
Song Info — Lists the title, artist, album, genre, copyright information,
time length, file size, and bit rate of the selected music file.
2. Insert the Memory Card into a compatible card reader.
Note: Card readers vary. Follow the installation instructions included with
your card reader and personal computer.
3. Open the Memory Card reader drive and the “My_Music”
folder.
4. Drag or download music (MP3) files into the “My_Music”
folder.
5. Remove the Memory Card by following the removal
instructions for the Memory Card reader and for your
personal computer.
Select the desired option to launch the option or to access the sub-
menu.
6. Insert the Memory Card into your phone. (For more
Loading Music Files
Using an Optional Card Reader
1. Before loading music files on a microSD™ Memory Card,
do the following:
Music Player
70
Using an Optional Data Cable
“Connected To PC” appears in the TwoStep display. Your
phone appears as a removable disk on your PC.
To obtain a USB-to-micro USB Data Cable compatible with your
TwoStep phone, contact your Wireless Carrier.
3. Copy or transfer your music files to the My_Music folder on
1. In standby mode, connect the smaller (micro USB) end of
your phone.
the Data Cable to your TwoStep phone.
4. Press the Done soft key on your phone. You are prompted
to confirm that you want to “Exit USM mode?
”
5. Press the Yes soft key. Your phone returns to standby
mode.
6. Disconnect the Data Cable.
Playlists
Correct
Playing a Playlist
more information, refer to
“With the Flip Open” on
Incorrect
2. Connect the larger (USB) end of the Data Cable to your PC.
2. Press the Library soft key, then
select Playlists
.
3. Highlight the desired playlist
and press the Play soft key. The Music Player screen
appears in the display and a music file begins playing.
71
Adding a Playlist
5. Highlight each file you want to
add to your new playlist and
press the MARK key ( ). A
check mark appears in each
selected file’s check box.
To create a new playlist, do the
following:
more information, refer to
“With the Flip Open” on
6. When you have marked all the
files you wish to add to your
2. Press the Library soft key, then
select Playlists. The Playlists
screen appears in the display.
playlist, press the Done soft
key. The Playlists screen
appears in the display, showing your new playlist.
3. If there are no playlists, press
the Add soft key. Otherwise,
press the Options soft key and
select Add New Playlist. The
Enter new name field appears.
7. To play your new playlist,
press the Play soft key.
8. To see a list of the files in your
playlist, press the VIEW
key( ).
4. Enter a name for your new
playlist. (For more information,
page 35.) A list of your music
files appears in the display.
9. For the following additional
options, press the Options soft
key:
• Add New Playlist — Lets you create a new playlist.
• Rename Playlist — Lets you change the name of this playlist.
Music Player
72
• Erase Playlist — Lets you remove this playlist from your phone.
• Add Songs — Lets you select songs and add them to this playlist.
• Move to Another List — Lets you select move the marked files in
this list to another playlist.
Note: Erasing a playlist does not erase the files listed in the playlist.
• Remove From List — Lets you erase marked files from this
Managing Files in a Playlist
more information, refer to
“With the Flip Open” on
playlist.
• Song Info — Shows the Title, Artist name, Album name, Genre,
File Name, Encoding Format, Bit rate, File Size, and time and Date
for a marked or highlighted file in this playlist.
2. Press the Library soft key, then
select Playlists. The Playlists
screen appears in the display.
3. Highlight the playlist whose
file list you wish to change, then press the VIEW key ( ).
The selected Playlist's file list appears in the display.
4. To mark files for change, highlight each file and press the
MARK key ( ). A check mark appears in each selected
file’s check box.
5. Press the Options soft key. The following options are
available:
• Mark All — Marks all files in this playlist.
73
Section 9: Camera
Use your TwoStep phone to take full color digital pictures, display
them on your phone’s vivid color display, and instantly share
them with family and friends. It’s fun, and as easy to use as a
traditional point-and-click camera. This section explains how you
can do the following:
Taking Snap Shots (Single Pictures)
To take a single picture using the current camera settings, do the
following:
1. In standby mode, press and hold the Camera key (
) on
the right side of the phone. The message “Please, Wait...
appears in the display followed by a camera view finder
”
•
•
•
Take pictures with your phone’s built-in digital camera.
Send your pictures to others in Picture messages.
Set the several options associated with the camera that help you take
crisp, clear pictures.
Taking Pictures
Taking pictures with the built-in
camera is as simple as
Note: You can also activate the camera by pressing Menu ( ), then
Camera
Lens
selecting Multimedia ➔ Camera.
2. Using the display as a
viewfinder, point the camera
lens (on the front of the flip,
near the hinge) at your
subject.
launching the camera, choosing
a subject, pointing the lens
(located on the front of your
phone’s flip, near the hinge), and
pressing a button.
3. When the image that you wish
to capture appears in the
display, press TAKE
(
).
Camera
74
4. To save the picture to memory, press the Save soft key.
2. Press the Options soft key.
The options menu bar appears
at the top of the camera
screen.
To erase the photo, press the Erase soft key.
Tip: You can change a number of the camera’s settings to suit particular
information.
3. Highlight the Shot Type icon
(
). The following Shot
Taking Multi Shot Pictures
Type options appear in the
When taking pictures of moving subjects or subjects you cannot
pose, such as children and pets, the camera’s Multi Shot mode
simplifies the process of taking multiple pictures in quick
succession. After taking Multi Shot pictures, the camera
automatically displays thumbnail views of the pictures you have
just taken so you can select the best picture(s) and discard the
rest.
display:
•
•
•
•
Single Shot — Lets you take 1 photo at a time.
Series Shot — Lets you take a series of 3 or 5 photos.
Divided Shot — Lets you take a mosaic of 4 or 9 photos.
Frame Shot — Lets you select a colorful frame to include around
your photos.
1. In standby mode, press and hold the Camera key (
) on
4. Select Series Shot or Divided Shot
.
the right side of the phone. The message “Please, Wait...
appears in the display followed by a camera view finder
screen. Your phone is now in camera mode. (For more
”
•
When you select Series Shot, the following options appear in the
display:
–
–
Off
3 Auto — Lets you take 3 photos automatically with one press of TAKE
(
).
3 Manual — Lets you take 3 photos in quick succession by pressing
TAKE ) for each photo.
5 Auto — Lets you take 5 photos automatically with one press of TAKE
).
–
–
(
Note: You can also activate the camera by pressing Menu ( ), then
selecting Multimedia ➔ Camera.
(
75
–
5 Manual — Lets you take 5 photos in quick succession by pressing
TAKE ) for each photo.
7. When the image that you wish to capture appears in the
display, press TAKE ). The camera takes one picture
(
(
•
When you select Divided Shot, the following options appear in the
display:
(Manual) or multiple pictures in quick succession (Auto),
then the Series Shot Select to Save screen or the Divided
Shot multiple-photo screen appears in the display.
• Series Shot:
–
–
Off
4 Auto — Lets you take 4 shots automatically that are combined into a
single, mosaic photo, all with one press of TAKE
4 Manual — Lets you take 4 shots in quick succession by pressing
TAKE ) for each shot, with all 4 shots being combined into a single,
(
).
–
–
To save the pictures to memory,
(
press the Done soft key.
mosaic photo.
–
To discard the pictures, press
.
–
–
9 Auto — Lets you take 9 shots automatically that are combined into a
single, mosaic photo, all with one press of TAKE
9 Manual — Lets you take 9 shots in quick succession by pressing
TAKE ) for each shot, with all 9 shots being combined into a single,
mosaic photo.
(
).
(
5. Select the desired setting.
A Series Shot progress bar (
) or a
•
Divided Shot:
–
–
–
To save the pictures to memory,
press the Save soft key.
To send the picture in a picture
Divided Shot icon (
) (which acts as a progress bar
while pictures are being taken) appears in the display.
6. Using the display as a viewfinder, point the camera lens at
message, press Send
(
).
your subject.
To discard the pictures, press the
Erase soft key.
Camera
76
Series Shot in use — Takes a series
Camera Screen Layout
(
) of photos automatically or
When you activate your phone’s
camera, the top two lines of the
display are reserved for camera
icons (when active). The center of the
display shows a viewfinder image of
the subject at which the camera is
pointed.
manually when you press the
key. The number of
photos taken depends upon the Series Shot setting.
Divided Shot in use — Takes multiple shots
automatically (
) or manually (
) when you press the
key. The number of shots taken depends upon the
Divided Shot setting. All shots are combined into a single,
mosaic photo.
Camera Screen Soft Keys
Frame Shot in use — Takes one photo each time you
The soft key labels on the bottom line of the display change to
the following:
press TAKE
(
). Each photo is surrounded by a selected,
colorful frame.
•
My Images — Pressing the Left soft key opens the My Images
multimedia folder so you can view or manage your stored pictures.
Camera Resolution — Indicates camera’s current
resolution setting. (You can change the camera resolution
information.)
•
•
TAKE — Pressing
takes a picture of the subject currently
appearing in the camera view finder screen.
Options — Pressing the Right soft key opens a menu bar of camera
options and settings.
Night Shot — Lets you take photos in low light.
Self Timer in use — Delays the camera shutter from 2 to
Camera Screen Icons
10 seconds after you press
.
Camera — Indicates the camera is active.
Quality — Indicates camera’s picture quality setting. (You
can change the picture quality setting. For more
Single Shot in use — Takes one photo each time you
press TAKE ).
(
77
White Balance — Indicates camera’s white balance
setting. (You can change the camera white balance
Pictures are stored in the My Images folder, which is part of the
phone’s memory and/or card memory devoted to storing, browsing,
information.)
•
•
Send the picture to someone else by pressing Send
(
).
Photo Limit — Indicates the available number of
photos you can take. (Depending on the camera
resolution setting.)
Discard the picture by pressing the Erase soft key.
Phone Memory — Indicates photos will be stored in the
phone’s memory.
If Auto Save is set to On, these options are not available. After
pressing TAKE ), the picture(s) is (are) automatically saved,
Card Memory — Indicates photos will be stored on a
(
microSD Memory Card.
and you are returned to the camera screen.
Zoom — Enlarges the image from X0 to X7 before you
take a picture. (Depending on the camera resolution
Camera Options
The Camera Options let you temporarily adjust default camera
settings to suit available lighting, the subject of the photo, or the
purpose of the photo, for the current camera session. When you
exit the camera, your Camera Options values revert to their
default values.
Brightness — Brightens or darkens the image from -4
to +4 before you take a picture. (For more information,
To access Camera Options, do the following:
1. In camera mode, press the Options soft key. The Camera
Options menu appears in the display, containing the
following sub-menus:
Picture Options
After you take a picture, the following options are available (if
Auto Save is set to Off):
Save the picture by pressing the Save soft key.
•
Shot Type
Camera
78
•
•
•
Series Shot — Lets you take a series of 3 or 5 photos (3 Auto
3 Manual 5 Auto 5 Manual).
/
Resolution
Night Shot
Self Timer
Quality
/
/
Divided Shot — Lets you take a mosaic photo of 4 or 9 shots
4 Auto 4 Manual 9 Auto 9 Manual).
(
/
/
/
Frame Shot — Lets you select a colorful frame to include around
your photos (use the Left and Right navigation keys to preview
available frames).
White Balance
Color Effect
Settings
Note: The None frame is a blank frame.
2. Select the desired Shot Type.
Resolution
Resolution lets you change the clarity (in pixels) and size (in
bytes) of your pictures.
2. Select a sub-menu, then select a preferred value.
The following sub-sections describe camera options and
available values.
1. In camera mode, press the Options soft key, then highlight
the Resolution setting. The following values appear in the
camera screen:
Shot Type
Shot Type lets you take multiple photos or shots in succession at
the touch of a key and/or add colorful frames to your photos.
•
•
•
•
1280 X 960 (pixels)
640 X 480 (pixels)
320 X 240 (pixels)
176 X 144 (pixels)
1. In camera mode, press the Options soft key, then highlight
the Shot Type icon (
following values appear in the camera screen:
Single Shot — Lets you take 1 photo at a time.
/
/
/
). The
2. Select the desired Resolution value.
•
79
Note: The Resolution setting affects zoom capabilities. When Resolution is
set to 1280 X 960, zoom is not available. When Resolution is set to any
value lower than 1280 X 960, zoom settings X0 – X7 are available.
Note: If you select 2 Sec., 5 sec., or 10 sec., a Self Timer icon (
)
appears in the camera screen in the display.
The next time you press
, the countdown Self Timer
Night Shot
indicates the time remaining before the camera takes the
picture. The phone reads the countdown timer value to you
beginning with two or three and continuing to zero, when
the picture is taken.
Night Shot lets you take pictures in low light conditions.
1. In camera mode, press the Options soft key, then highlight
. The following options appear in the display:
• Off
Tip: To stop the countdown timer without resetting it, press
.
• On
2. Select the Night Shot setting of your choice.
Quality
Self Timer
You can affect how much your photo is compressed, thereby
reducing it’s overall size (not to be confused with resolution).
Self Timer lets you delay taking a picture long enough to let you
join others in a picture.
3. In camera mode, press the Options soft key, then highlight
1. In camera mode, press the Options soft key, then highlight
the current Quality indicator (
F,
N,
E). The following values
.
appear in the camera screen: Fine, Normal, or Economy.
4. Select the desired Quality value.
White Balance
The following values appear in the camera screen:
•
•
•
•
Off
2 Sec.
5 Sec.
10 Sec.
White Balance allows you to adjust picture quality according to
available light.
2. Select a Self Timer value.
Camera
80
5. In camera mode, press the Options soft key, then highlight
selected color effect previews in the display before you take the
picture.
the White Balance icon (such as,
). The following
7. In camera mode, press the Options soft key, then highlight
values appear in the camera screen:
. The following values appear in the display:
•
Auto — The camera automatically adjusts picture quality to
available light.
•
•
•
•
•
Normal — Subjects and pictures appear with a normal hue.
Black&White — Subjects and pictures appear in black and white.
Sepia — Subjects and pictures appear in a brownish-gray hue.
Negative — Subjects and pictures appear in inverted colors.
Green — Subjects and pictures appear in a greenish hue.
•
•
Sunny — Use this setting when taking pictures in full sun.
Cloudy — Use this setting when taking pictures in cloudy
conditions.
Tungsten — Use this setting when taking pictures under
incandescent lights.
•
•
Note: Choose Normal to disable Color Effects.
Fluorescent — Use this setting when taking pictures under
fluorescent lights.
8. Select the Color Effects value of your choice. The camera
viewfinder screen appears in the display with your
selected Color Effects value applied.
Each option, as you highlight it, shows the effects it has on
a picture.
6. Select the desired White Balance value. The camera
viewfinder screen appears in the display with your
selected White Balance value applied.
When you take your next picture, the camera applies your
selected Color Effects value to your picture.
Settings
The next time you press
, the camera applies your
selected White Balance value to your picture.
When you change Camera Settings values, your changes are
saved for future camera sessions, unlike changes to Camera
Options. To restore Camera Settings to their default values, select
Color Effect
Change the look of your pictures with Color Effect. Choose from
eight available settings such as Gray, Negative, and Sepia. The
81
Memory
•
•
•
1. In camera mode, press the Options soft key, highlight
Guideline — Shows a cross hatch pattern in the view finder
screen.
No Icons — Shows a nearly full-display subject image and without
icons.
, then select Memory. The following storage options
appear in the display:
• Phone — Stores your photos in phone memory.
6. Select the viewfinder screen setting of your choice. You’re
• Card — Stores your photos on an optional microSD Memory Card.
2. Select the memory location setting of your choice. An icon
returned to the camera viewfinder screen.
View Mode
(
or
) appears in the lower left corner of the
7. In camera mode, press the Options soft key, highlight
, then select View Mode. The following values appear
in the display:
camera screen to indicate where photos will be stored.
Auto Save
3. In camera mode, press the Options soft key, highlight
, then select Auto Save. The following values appear
in the display:
•
Landscape — Shows a wider, more panoramic view of the
subject.
•
Portrait — Shows a narrower, more vertically oriented view of the
subject.
•
•
Off
On
8. Select the View Mode setting of your choice. You’re
returned to the camera viewfinder screen, which now
shows the selected view.
4. Select the automatic save value of your choice. You’re
returned to the camera viewfinder screen.
Shutter Sound
Icon Display
5. In camera mode, press the Options soft key, highlight
, then select Icon Display. The following values
appear in the display:
Choose from four different sounds whenever you take a picture.
Aside from being a cool sound effect, Shutter Sounds acts as an
audible reminder that your camera has taken a picture.
Camera
82
9. In camera mode, press the Options soft key, highlight
, then select Shutter Sound. The following shutter
sounds appear in the display:
affects of your changes).
The next time you press
, the camera takes an
enlarged picture according to your selected Zoom setting.
•
•
•
•
Off
Shutter
OK
Brightness
Brightness lets you temporarily lighten the pictures you take.
Increasing the Brightness (-4 – +4) lightens your pictures (0 is
normal).
DingDong
10. Select the shutter sound value of your choice. You’re
ᮣ
In camera mode, press the Navigation key Left or Right to
adjust the Brightness (the screen image lightens or
darkens to show the affects of your changes).
returned to the camera viewfinder screen. The next time
you press
, you’ll hear your selected shutter sound.
Reset Settings
The next time you press
, the camera takes a lighter or
11. In camera mode, press the Options soft key, highlight
, then select Reset Settings. You are prompted to
confirm reset of all camera settings.
darker picture according to your selected Brightness
setting.
My Images
Saved pictures are stored in the My Images folder. You can
browse the pictures one at a time (expanded mode), or view
several pictures at once in thumbnail format.
•
•
Select the Yes option to reset the camera settings to default values.
Select the No option to keep the current camera settings.
Zoom
Zoom lets you temporarily enlarge the pictures you take.
Increasing the Zoom (X0 – X7) enlarges your pictures (0 is
normal).
1. In camera mode, press the My Images soft key. Any
pictures that you’ve saved appear in the display.
ᮣ
In camera mode, press the Navigation key Up or Down to
adjust the Zoom (the screen image enlarges to show the
83
4. Select the desired option to perform the function for the
Tip: You can also access the My Images folder by pressing Menu
(
) and
option or enter its sub-menu.
➔
2. Use the Navigation key to browse pictures in the gallery.
3. Press the Options soft key while viewing pictures in the
Gallery. The following options appear in the display:
•
Send — Send the currently displayed or highlighted picture as a
Picture message or via a Bluetooth connection.
•
Set As — Assign the currently displayed or highlighted picture to
be Main display Wallpaper, Front display Wallpaper, or as a Picture
ID for someone in your Contacts list.
•
Rename — Rename the currently displayed or highlighted picture.
• Move — Move the currently displayed or highlighted picture
between phone memory and an optional Memory Card.
• Copy — Save a copy of the currently displayed or highlighted
picture to phone memory or an optional Memory Card.
•
•
•
Lock Unlock — Lock the currently displayed or highlighted
picture so that it cannot be deleted, or unlock the picture so that it
can be deleted.
Erase Files — Erase selected unlocked pictures in the Picture
Gallery. Locked pictures must be unlocked before you can erase
them.
Picture Info — View the Title, time and date created, size, and
resolution of the currently highlighted or displayed picture.
/
Camera
84
Switch From Expanded to Thumbnail Mode
1. Highlight a picture that you wish to view full size, then
press VIEW
2. To return to the thumbnail view of your photos, press VIEW
).
(
).
(
Point, Click, and Send Pictures
Take a picture and send it to anyone with a compatible device in
a few easy steps.
1. In camera mode, take a desired picture by pressing
.
2. Press Send ( ). The Create Pic Msg screen appears in
the display.
3. Enter or Add the recipient’s phone number or Email
address using the keypad.
4. Press OK
(
). The address(es) are saved and the Subject
field appears in the Create Pic Msg screen. Use the
Navigation key to move to the other message fields. (For
5. When you are finished composing your message, press
SEND ( ) to send the Picture message to the intended
recipients.
85
Section 10: easyedgeSM
SM
SM
With easyedge , you can download multimedia, applications,
The easyedge shop tab lets you locate, purchase (when
games, and check news and sports.
required), and download an application, ringtone, or other
multimedia files.
Tip: You can access easyedgeSM Games home page directly from standby
mode by tapping the Menu soft key, then selecting Games
.
Launching an Application
1. In standby mode, tap the Menu
Note: easyedgeSM from U.S. Cellular is only available on approved phones
easyedge or call U.S. Cellular customer service (by dialing 611 on your
soft key, then select easyedge
.
SM
The easyedge screen
phone) and ask about easyedgeSM
.
appears in the display with the
SM
Accessing easyedge
myapps tab showing.
SM
With easyedge , you can download
full featured applications over the air
including games, personalized ring
tones, pictures, and more.
2. Press the Right Navigation
key.
The my stuff tab shows, listing any applications (apps) you
have downloaded.
ᮣ
In standby mode, tap the Menu
soft key, then select easyedge
.
3. Highlight the application you wish to run, then press
.
SM
The easyedge screen
Finding and Downloading Applications
appears in the display with the
1. In standby mode, tap the Menu soft key, then select
SM
easyedge shop tab showing.
SM
easyedge. The easyedge screen appears in the display
SM
with the easyedge shop tab showing.
easyedgeSM
86
2. Follow the prompts to locate, purchase (when required),
and download an application, ringtone, or other
multimedia files.
87
Section 11: Multimedia
This section outlines your phone’s multimedia functions and key
features associated with multimedia.
2. Select the desired sub-menu. The following sections
describe the above listed sub-menus in greater detail.
Accessing Multimedia
My Images
1. In standby mode, press Menu ( ), then select
Multimedia. The following sub-menus appear in the
display:
My Images lets you choose the pictures that appear in your
phone’s display while in standby mode (Wallpaper) and as picture
IDs for your contacts.
•
My Images — Lets you choose the pictures that appear in your
phone’s display or in picture messages.
1. At the Multimedia menu, select My Images. A 2-by-2
matrix of thumbnail images of your pictures appears in the
display.
•
• Music Player — Lets you play music files stored on an optional
Tip: You can also access My Images from:
– The Camera screen by pressing the Gallery soft key
•
My Ringtones — Lets you assign ringtones for Ringtone (calls),
Contact ID, and Alert Tone.
My Sounds — Lets you assign sound files as ringers for Ringtone
(calls), Contact ID, and Alert Tone.
– The Edit Contact screen by selecting the picture ID field and pressing
the Set soft key.
•
2. Highlight a picture, then press
to expand the
highlighted picture to fill the screen.
Tip: To launch the Multimedia menu using a voice command — In standby
mode, press and hold until the phone prompts, “Say a command.”
Say “Go to Multimedia” into the microphone.
3. Press the Options soft key.
Multimedia
88
4. A pop-up menu containing the following options appears in
1. At the Multimedia menu, select My Ringtones. A list of
the display:
ringtones appears in the display.
•
Send — Send the currently displayed or highlighted picture as a
Picture message or via a Bluetooth connection.
Tip: You can also access My Ringtones from:
•
Set As — Assign the currently displayed or highlighted picture to
be Main display Wallpaper, Front display Wallpaper, or as a Picture
ID for someone in your Contacts list.
–A Set Alarm screen by selecting the Ringer option, highlighting the
second (file name) field, pressing the Left or Right navigation key, and
selecting My Ringtones.
•
Rename — Lets you rename the picture.
–The Edit Contact screen by selecting the Ringtone field, pressing the
Set soft key, and selecting My Ringtones.
• Move — Move the currently displayed or highlighted picture
between phone memory and an optional Memory Card.
• Copy — Save a copy of the currently displayed or highlighted
picture to phone memory or an optional Memory Card.
•
•
•
2. Use the Navigation key to highlight a particular ringtone.
Lock Unlock — Lets you prevent/permit picture deletion.
/
•
•
Press
to PLAY the ringtone.
Erase Files — Erases one or more selected pictures.
Picture Info — Displays information about the picture, such as
Press the Info soft key to show the Title and File Type.
3. Press the Set As soft key to assign the highlighted
the picture Name, creation Date and Time
,
Resolution, and the
data Size
.
ringtone. The following options appear in the display:
5. Select the desired option.
•
•
•
Ringtone — Lets you assign the selected ringtone to incoming
voice calls.
Contact ID — Lets you assign the selected ringtone as the
distinctive ringer for a Contact.
6. To return to the previous menu, press
. To return to
standby mode, press
.
My Ringtones
My Ringtones lets you assign ringtones (preloaded and
downloaded) for Ringtone, Contact Id, and as Alert Tone.
Alert Tone — Lets you assign the selected ringtone to All Msg
Text Msg Picture Msg, or Voicemail Msg
4. Select the desired option.
,
,
.
89
5. When using a downloaded ringtone, press the Options soft
2. Use the navigation keys to highlight the Record New
option, then press to record a voice memo. (See
key and the following options appear in the display:
•
•
•
•
Lock Unlock — Lets you prevent/permit file deletion
Erase — Erases the selected file
Rename — Lets you rename the selected file
Ringtone Info — Displays information about the selected file,
such as the file name, the file type, and the data size
/
information.)
3. Press the Options soft key.
•
For a preloaded sound file, a pop-up menu containing the following
options appears in the display:
6. Select the desired option.
–
Send — Lets you send the selected sound file to a specified recipient in
7. To return to the previous menu, press
. To return to
a Picture message.
standby mode, press
.
–
Set As — Lets you assign the selected sound file as the Ringtone or
as the Contact ID for a Contact or an Alert Tone for Text, Picture, or
Voicemail messages.
My Sounds
My Sounds lets you record voice memos and lets you assign
preloaded and downloaded sound files as Ringtones, Contact IDs,
or Alert Tones.
–
–
Erase All — Erases all sound files.
Sound Info — Displays information about the sound file, such as the
Title, File Size, and File Type.
•
For a recorded sound file, a pop-up menu containing the following
options appears in the display:
1. At the Multimedia menu, select My Sounds. Record New
and a list of sound files appears in the display.
–
Send — Lets you send the selected sound file to a specified recipient in
a Picture Message or to another device Via Bluetooth connection.
Tip: You can also access My Sounds from:
–
Set As — Lets you assign the selected sound file as the Ringtone or
as the Contact ID for a Contact or an Alert Tone for Text, Picture, or
Voicemail messages.
–A Set Alarm screen by selecting the Ringer option, highlighting the
second (file name) field, pressing the Left or Right navigation key, and
selecting My Sounds
–
–
–
Rename — Lets you rename the sound file.
–The Edit Contact screen by selecting the Ringtone field, pressing the
Set soft key, and selecting My Sounds.
Lock
/
Unlock — Lets you protect the sound file from being deleted.
Erase All — Erases all sound files.
Multimedia
90
–
Sound Info — Displays information about the sound file, such as the
Title, File Size, and File Type.
•
The maximum length for a single voice memo is 60 seconds.
Record a Voice Memo
•
For a downloaded sound file, the following options appear in the
display:
–
1. At the Multimedia menu, select My Sounds ➔ Record
New. The Record New screen appears in the display.
Send — Lets you send the selected sound file to a specified recipient in
a Picture message.
Tip: You can also set your phone to record a Voice Memo while in a call. This
–
Set As — Lets you assign the selected sound file as the Ringtone or
as the Contact ID for a Contact or an Alert Tone for Text, Picture, or
Voicemail messages.
–
–
–
–
Rename — Lets you rename the sound file.
2. Press
, then start speaking. As it is recording the phone
Lock Unlock — Lets you protect the sound file from being deleted.
/
displays a countdown timer that shows the seconds
remaining for the recording.
Erase All — Erases all sound files.
Sound Info — Displays information about the sound file, such as the
file name, file type, and the data size.
•
To pause the memo, press the Pause soft key. When a memo is
paused, select Resume to continue recording.
4. Select the desired option.
3. Press
once you’re finished recording. The new
5. To return to the previous menu, press
. To return to
recording is automatically saved.
standby mode, press
.
Review Voice Memos
Record New Voice Memo
If you’ve saved any voice memos, you can review them anytime.
1. At the Multimedia menu, select My Sounds. A list of
sound files appears in the display.
You can use your phone to record voice memos for later
playback. You can also record the caller on the other end of the
line during a phone conversation.
2. Use the navigation keys to highlight the voice memo you
Note: There is limited space for the length of recordings.
wish to review.
91
3. Press
to play the voice memo.
•
To stop the memo, press . Press
memo.
again to restart playing the
When the voice memo finishes playing, the selected voice
memo remains highlighted in the list of sound files.
Erase a Voice Memo
1. At the Multimedia menu, select My Sounds. A list of
sound files appears in the display.
2. Use the navigation keys to highlight the voice memo you
wish to erase.
3. Press the Erase soft key. “Erase Sound?” appears in the
display.
4. Press the Yes soft key to erase the selected voice memo or
press the No soft key to return to the list of sound files.
Multimedia
92
Section 12: Bluetooth
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
display:
• Add New Device
• Registered List
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within a range of
one another, you can exchange information between them, even
if they are located in different rooms.
• Bluetooth Settings
2. Select the desired Bluetooth sub-menu.
Add New Device
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
To search for available Bluetooth devices:
1. At the Bluetooth menu, select Add New Device.
If Bluetooth is off, you are prompted to “Turn Bluetooth
Turn Bluetooth On/Off
on?”.
When the Bluetooth is turned on, you can use the Bluetooth
features available. When the Bluetooth is turned off, you cannot
send or receive information via Bluetooth. To save battery life or
in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology
•
•
To turn Bluetooth on, press the Yes soft key.
To leave Bluetooth off, press the No soft key.
“
Place device you are connecting to in discoverable mode”
appears in the display.
2. Place the Bluetooth device in discoverable mode. (For
more information, refer to the device user manual.)
Accessing Bluetooth
1. In standby mode, press Menu ( ), then select
3. Press
display.
. Names of the available devices appears in the
Bluetooth. The following sub-menus appear in the
93
4. Highlight the device you want to pair with your phone.
• Enable Disable — Turns Bluetooth on or off.
/
• Discovery Mode — Lets other devices “see” (access) your device.
Select On for other devices to see your device, or Off for no visibility.
• Device Name — Shows the handset name. You may change this
5. Press PAIR ( ) to pair the selected device with the
phone. You are prompted to enter the passkey or PIN for
the selected device. (For more information, refer to the
device user manual.)
name. Enter text changes and press
to save them.
• Supported Profiles — Lists and explains the Bluetooth profiles
supported by your phone.
6. Enter the device passkey or PIN and press
.
• Device Info — Shows the Bluetooth Type, Status, and Address of
your phone.
2. Select the desired option to perform the related process.
Registered List
Registered List provides a list of Bluetooth wireless technology
devices previously connected to your handset.
ᮣ
At the Bluetooth menu, select Registered List. The
Bluetooth screen appears in the display showing a list of
devices previously connected to your device.
Connecting to a Bluetooth Device
From the Registered List,
ᮣ
Select the desired device.
Note: If you are unable to pair with the device a pop-up appears in the
display. To retry, press the Yes soft key.
Bluetooth Settings
1. At the Bluetooth menu, select Bluetooth Settings. The
following options appear in the display:
Bluetooth
94
Section 13: Calendar
–
–
–
Go to Today — Lets you jump to today’s date.
Erase Old — Lets you erase past events.
Erase all — Lets you erase all events.
Calendar lets you view the current, past, or future month in a
monthly calendar layout. While viewing the calendar, the current
date is highlighted and days with scheduled events are
surrounded by a box.
Select the desired option to perform the related process.
View an event
3. Open the highlighted date by pressing
. A list of
1. In standby mode, press Menu ( ),
scheduled events appears in the display.
then select Calendar.
4. Select the desired event. Information for the selected event
A calendar appears in the display
with the current date highlighted.
The month and year also appear.
appears in the display.
Add a New Event
1. In standby mode, press Menu ( ),
2. Use the following keys to navigate your calendar and
then select Calendar.
highlight a desired date.
A calendar appears in the display
with the current date highlighted.
The month and year also appear.
•
To move from one day to another, use the Left/Right navigation
keys.
•
To move from one week to another, use the Up/Down navigation
keys.
2. Highlight the date of the new event.
•
•
•
To view previous months, press the Volume key Up.
3. Press the Add soft key. The New Event screen appears in
To view future months, press the Volume key Down.
To access other options, press the Options soft key while viewing
the calendar. The following options appear in the display:
the display.
–
Go to Date — Lets you jump to any date you specify.
95
4. To select and enter details of the event, use the Navigation
key and the keypad. (For more information, refer to
10. To store the event in your calendar, press
. An alert will
notify you prior to the event, if you set a notification alert.
5. Enter the start and End dates and times for the event using
the keypad. Enter the dates and times for the event using 2
digits for day, month, hour, and minute entries. Use 4 digits
for year entries.
6. To change between AM and PM, use the Left and Right
navigation keys.
7. When you’re finished entering the dates and times, to
highlight the Alert field, use the Up and Down navigation
keys. To select a type of alert, use the Left and Right
navigation keys.
8. Highlight the Reminder field, and set the Reminder to Off
or to select a reminder interval using the Left and Right
navigation keys.
9. Highlight the Alert time field, use the Up and Down
navigation keys, then select the amount of time before the
event occurs that you wish to be notified by an alert using
the Left and Right navigation keys.
Calendar
96
Section 14: Tools
This section explains how to use your phone’s digital assistant
tools to schedule events, set reminders, perform calculations,
and more.
•
•
Converter — Lets you convert currencies (according to the latest
rates) and weights, measures, and temperatures from one system
or increment to another.
Tip Calculator — Lets you quickly calculate service gratuities with
a minimum of key presses.
Tools Menu
Tools is a suite of Personal Information Manager (PIM)
applications such as a Calendar, and Memo Pad that run on your
phone. You can use your phone to schedule events, set
reminders, perform calculations, and more with the functions
provided by this useful feature.
Tip: To launch the Tools menu using a voice command — In standby mode,
press and hold
until the phone prompts, “Say a command.” Say
“Go to Tools” into the microphone.
2. Select the desired Tool sub-menu.
The following sections provide detailed descriptions of the
Tools and how to use their functions.
Opening Tools Menu
1. In standby mode, press Menu ( ), then select Tools. The
following sub-menus appear in the display:
Voice Service
VoiceSignal is state-of-the-art voice recognition software for your
mobile phone that lets you dial numbers, lookup contact
information, and open applications using your voice. To access
your phone’s voice settings, do the following:
•
•
•
Voice SVC — Lets you access voice recognition functions.
Memo Pad — Lets you store and review useful information.
Alarm Clock — Lets you set an alarm to go off once, or daily, at a
specified time.
World Time — Lets you view the current time of day or night in
another part of the world.
Calculator — Lets you perform calculations, including addition,
subtraction, multiplication, and division.
Stop Watch — Lets you view the amount of time.
•
•
•
1. At the Tools menu, select Voice SVC.
97
page 52..)
Lookup — Lets you look up and display contact information for any
name stored in your Contacts list by saying the name. (For more
Go to — Lets you access all of the Main Menus on your phone.
Check — Lets you check your phone's status (that is, network
coverage, signal strength, and battery in the same report), network
coverage, signal strength, battery, and phone number.
The following options appear in the display:
•
Voice Commands — Lets you place calls, access your Contacts
List, review your appointments, and more by speaking commands
into your phone. (Also see “Making a Call — Voice Dialing”
information.)
–
–
–
•
Voice Settings — Lets you adjust VoiceSignal to better suit your
needs.
2. Select the desired sub-menu.
Voice Commands
To start VoiceSignal, do one of the following:
–
–
•
In standby mode, press and hold
.
“
Say a Command” appears in the display and is pronounced through
the earpiece, followed by a list of available commands.
•
At the Tools menu, select Voice SVC ➔ Voice Command
.
Note: Speaking clearly, say the command that you want to use.
Note: You can set your phone to start VoiceSignal when you open the phone.
If, after a few seconds, the device has not recognized a command, it
prompts you to repeat the command.
VoiceSignal includes the following commands:
If, after a few more seconds, it still has not recognized a command, it
tells you “Sorry, no match found,” and cancels voice recognition.
–
Call — Lets you dial the phone by saying any name stored in your
contact list, without ever having to record, or “train” that name.
VoiceSignal automatically voice-activates all your contacts, even if you
have hundreds of them stored on your phone. You can also dial any
telephone number, even if it is not stored in your contact list, by saying
Voice Command Tips:
Make sure you wait for the beep before speaking.
•
•
Speak clearly at a normal volume, as if you were talking on the phone.
Tools
98
Voice-Activating Your Contacts List
To change the way VoiceSignal uses choice lists:
ᮣ
At the Voice SVC sub-menu, select Voice Settings ➔
When you first start VoiceSignal, it reads your Contacts list and
voice-activates all the names stored there. When you have add or
change contacts, VoiceSignal automatically reloads and voice-
activates the entire list.
Choice Lists the following options appear in the display:
•
•
•
Automatic—VoiceSignal displays a choice list only when it is not
sure if it has correctly recognized the name or number.
Always On—VoiceSignal always displays a choice list, even when
there is only one choice.
Ending Calls Before Restarting the VoiceSignal Software
When you use VoiceSignal to make a call, you must end that call
before you can use VoiceSignal again.
Always Off—VoiceSignal never displays a choice list.
Select the preferred Choice List behavior.
Voice Settings
Choice Lists
Sensitivity
1. At the Voice SVC sub-menu, select Voice Settings ➔
VoiceSignal uses choice lists when it is not confident it has
correctly recognized a name or number. In this case, it can
display a list of up to three possible choices, and prompt you to
confirm the correct one.
Sensitivity. The Sensitivity screen appears in the display.
2. Use the Navigation key to adjust the selected Sensitivity
setting toward Reject More spoken commands or names
or toward Reject Less spoken commands or names.
You can change the way that VoiceSignal uses choice lists with
name dialing, digit dialing, and contacts. For each feature, you
can choose to always see a choice list (even if there is only one
choice), or never see a choice list (even if there are multiple
choices). If you leave the setting at “Automatic,” VoiceSignal
displays a choice list only when it is not confident it has correctly
recognized the name or number.
3. To accept the new setting, press
.
Digit Dialing
If you regularly have trouble with VoiceSignal not recognize the
numbers you say, try adapting digit dialing to your voice.
Adapting can improve the accuracy of digit recognition,
especially for people with strong regional accents.
99
Your phone displays the first digit sequence and “Please
say” plays through the speaker followed by the four digits
appearing in the display.
Note: After you adapt Digit Dial, your phone is customized to your voice, and
your voice only. Others will not be able to use it unless they reset the
Digit Dialing to factory defaults. (For more information, refer to “Reset
Digits” on page 101..)
2. Wait for the beep and say the digits using your normal tone
of voice. After a moment, the phone plays back the
recording and prompts “Did the recording sound ok?”
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
Tips for Adapting Digit Dialing
•
•
If the recording was good, say “Yes.”
If you need to re-record, say “No.”
•
•
•
•
Use Adapt Digits in a quiet place.
Make sure you wait for the beep before starting to speak.
Speak clearly, and say each digit distinctly.
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, re-record that
sequence.
Repeat this step until you’re satisfied with the recording.
3. After confirming that the recording sounds “ok”, continue
•
Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always reset digit adaptation to its original
state, as described below.)
the recording process with the next set of digits.
4. After six sets of digits, the phone asks whether you want to
do more adaptation. Answer “Yes.”
Adapt Digits
5. Repeat steps 4 and 5 for another six sets of digits. After
the second group of six sets of digits, “Adaptation
complete” plays through the speaker and you are returned
to the Adapt Digits menu.
To adapt digit dialing, do the following:
1. At the Voice SVC sub-menu, select Voice Settings ➔
Digit Dialing ➔ Adapt Digits.
Tools
100
Reset Digits
1. At the Voice SVC sub-menu, select Voice Settings ➔
Voice Launch. The following options appear in the display:
To reset digit dialing to factory default settings, do the following:
1. At the Voice SVC sub-menu, select Voice Settings ➔
Digit Dialing ➔ Reset Digits.
•
Key Only — Press and hold
call.
to activate VoiceSignal for one
•
Key/Ear Mic — Attach a headset to your phone. Press and hold
to activate VoiceSignal. Now, you can make and end calls
using VoiceSignal by pushing the button on the headset.
The phone prompts you to confirm digit reset.
2. To reset your digit adaptation, press the OK soft key. To
• Key/Flip — Press the
key to activate VoiceSignal for repeated
cancel, press the Back soft key.
calls. Open and close the flip to make and end calls using
VoiceSignal. Press to release VoiceSignal.
Sound
2. Select the Voice Launch option you want.
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
About VoiceSignal
This option causes the About VoiceSignal screen to appear in
the display, showing version and build information about the
VoiceSignal software included on your phone.
1. At the Voice SVC sub-menu, select Voice Settings ➔
Sound. The following options appear in the display:
•
•
•
•
Prompts — Enables (On) or disables (Off) playing of prompts.
Digits — Enables (On) or disables (Off) playing of digits.
Names — Enables (On) or disables (Off) playing of names.
Name Settings — Lets you adjust the speed and volume of your
phone’s audio name playback.
1. At the Voice SVC sub-menu, select Voice Settings ➔
About.
The About VoiceSignal screen appears in the display
showing the version level of the VoiceSignal software
currently installed on your phone.
2. Select the desired option and setting.
Voice Launch
To set the key or action that launches VoiceSignal, do the
following:
101
Enter text changes using the keypad. (For more
Memo Pad
You can create a notes and store them in Memo Pad. You can’t
prioritize or set an alert for stored notes. Return to Memo Pad
anytime you wish to review and edit your notes.
5. To erase the memo you are viewing, press the Options soft
key, then select Erase. You are prompted to verify the
erasure.
Add a Memo
1. At the Tools menu, select Memo Pad. If you have any
stored memos, they appear as a list in the display. If this is
your first time in Memo Pad, “No memos” appears in the
display.
•
•
To erase the memo, press the Yes soft key.
To keep the memo, press the No soft key.
Alarm Clock
Your phone has an alarm clock that can be set to go off once, or
daily at a specified time. Once set, the alarm clock is easy to
change or turn off completely.
2. To add a new memo, press the Add soft key.
Note: The alarm doesn’t function when the phone is turned off. If the time for
an alarm that was set for Once has elapsed and the phone is off, the
alarm occurs at the same time on the following day.
4. When you’re finished entering memo text, press
to
save the memo.
1. At the Tools menu, select Alarm Clock. The following
View, Edit, and Erase Memos
options appear in the display:
1. At the Tools menu, select Memo Pad. A list of your stored
•
•
•
Alarm 1
Alarm 2
Alarm 3
memos appears in the display.
2. Highlight the desired memo.
3. To view the memo, press VIEW ( ).
4. To edit the memo you are viewing, press the Edit soft key.
Tools
102
2. Select an Alarm. A Set Alarm screen appears in the display
•
•
•
If the alarm was set as a Mon.-Fri., the alarm icon remains in the
top of the display.
If the alarm was set as a Weekends only alarm, the alarm icon
remains in the top of the display.
If the alarm was set as a Once only alarm, the alarm icon
disappears from the top of the display.
containing the following options:
•
•
•
•
Alarm
Time
Frequency
Ringer
Turn Off the Alarm
3. Highlight the options you wish to change, then select
values for the options using the Left and Right navigation
keys.
Turning off an Alarm stops it from sounding when the set time is
reached while retaining the Alarm settings for your reuse.
1. At the Tools menu, select Alarm Clock.
To enter the Time for the alarm, use the keypad.
2. Highlight Alarm 1 / Alarm 2 / Alarm 3.
4. When you’re finished entering and selecting values for the
3. Press the Options soft key and select Off. The highlighted
Alarm is turned off, but the alarm settings are retained for
later reuse.
alarm, press
. The alarm is set and the alarm icon
(
) appears in the top of the display.
When an Alarm Sounds
Reset the Alarm
An animated alarm clock appears in the display with the options
Snooze or Dismiss, and an alert sounds when the specified time
for the alarm arrives.
Resetting one or all Alarms erases all of your Alarm settings and
restores the default settings.
1. At the Tools menu, select Alarm Clock.
ᮣ
To silence the alarm, use the Navigation key to select
2. If desired, highlight Alarm 1 / Alarm 2 / Alarm 3.
Dismiss.
•
If the alarm was set as a Daily alarm, the alarm icon remains in the
top of the display.
103
3. Press the Options soft key. Select from the following
The following time zones/cities are supported:
options:
EST/EDT:
New York
Miami
Caracas
La Paz
Newfoundland
• On Off — Enables or disables the highlighted Alarm, using
/
current settings.
Buenos Aires Mid Atlantic
Brasilia
Cape Verde
London
Lisbon
• Reset Alarm — Resets the highlighted Alarm to default settings.
• Reset All — Resets all Alarms to default settings.
World Time
World Time lets you view the time of day or
night in another part of the world. World
Time displays time in the 24 different time
zones around the world.
Rome
Paris
Berlin
Athens
Helsinki
Istanbul
Moscow
Jidda
Nairobi
Tehran
Abu Dhabi
Kabul
Tashkent
Mumbai
New Delhi
Colombo
1. At the Tools menu, select World
Time. A world map appears in the
display.
Kathmandu
Alma-ata
Adelaide
Bangkok
Jakarta
Hong Kong
Beijing
Seoul
Tokyo
Guam
Sydney
Okhotsk
2. To display the time zone and city that you wish to view, use
the Left and Right navigation keys, or press the Options
soft key, then select Go to City and the preferred city in the
alphabetical city list.
Wellington
Auckland
Samoa
Midway
HAST/HADT: AKST/AKDT:
Honolulu
Hawaii
Alaska
PST/PDT:
Los Angeles
San
MST/MDT:
Denver
Phoenix
CST/CDT:
Chicago
Dallas
Francisco
Tools
104
3. The following options are available:
•
•
•
•
•
Up navigation key — [
Left navigation key — [
OK key — [ ] Equals/Total
Right navigation key — [
Down navigation key — [
x
-
] Multiplication
] Subtraction
•
To show Daylight Saving Time (DST) for the displayed time zone,
press the DST On soft key. To display standard time, press the DST
Off soft key.
=
+] Addition
÷] Division
•
•
•
To set the displayed time zone as the home time zone for your
phone, press the Options soft key and select Set as home clock
To set the displayed time zone as the second time zone for your
phone, press
To keep the current home time zone and/or second time zone and
return to the Tools menu, press
.
For nested operations [such as (1.81 + 9.34) / 5.22] and to
2
calculate powers (such as 3 ), press the Operator soft key.
.
The following options appear in the display:
.
•
•
•
(
)
— Beginning of nested operation
— Ending of nested operation
Calculator
You can perform calculations, including
addition, subtraction, multiplication, and
division using your phone.
Power — Raise the current number to the power of your next
entry
4. Use the keypad to enter the next number in your
calculation.
1. At the Tools menu, select Calculator.
The Calculator appears in the
display.
5. Repeat steps 3 and 4 as needed.
6. To perform the calculation and view the result, press
To clear your last operation or number entry, press
To clear all of your entries, press the Clear soft key.
.
2. Enter the first number in your calculation using the keypad
.
(numbers can be up to nine digits long).
•
To enter a decimal point, press
digits after a decimal point.)
. (Calculator only accepts 3
•
To change the sign for a number to a negative, press
.
3. Use the Navigation key to set the type of calculation that
you wish to perform. Your choices are as follows:
105
•
•
Area
Stop Watch
Temperature
You can use this menu to set a stop watch.
1. At the Tools menu, select Stop
Watch.
To convert a currency, length, weight,
volume, area, or temperature, do the
following:
2. Press
to start, stop, and resume
1. At the Tools menu, select Converter.
the stopwatch count.
2. Select the conversion feature you
3. Press the Record soft key at the
start of each succeeding event/lap to
record the completion time for the
previous event/lap.
wish to use. The selected conversion feature screen
appears in the display with the From unit field highlighted.
3. Use the Left and Right navigation
keys to select the unit to be
converted From.
4. Press the Reset soft key to erase all
stop watch (lap) times recorded.
4. Highlight the From quantity field.
Converter
5. Use the keypad to enter the quantity
you want converted in the From
quantity field.
The conversion menu provides the following conversion features:
•
•
•
•
Currency
Length
Weight
Volume
Tools
106
6. Highlight the To unit field.
4. To edit the highlighted exchange
rate, press EDIT ).
(
7. Use the Left and Right navigation
keys to select the units to be
converted From and To. The
converted quantity appears in the To
quantity field.
5. Use the keypad to change the
current exchange rate. (For more
•
To save the changed exchange rate,
press
Note: To include a decimal point, press
.
.
•
To discard your changes and return to the Currency Converter
screen, press the Cancel soft key.
Currency — Reviewing/Editing Exchange Rates
The Currency Converter includes long-term average exchange
rates as default values. To review and/or change a default
exchange rate to the current exchange rate, do the following:
Currency — Adding Exchange Rates
You can use the Currency Converter to convert from and to
obscure currencies by adding exchange rates for these
currencies. To add a currency and its exchange rate to the
Currency Converter, do the following:
1. At the Tools menu, select Converter ➔ Currency.
2. Press the Rate soft key. The
Exchange Rate list for the USD (U.S.
Dollars) currency appears in the
display.
1. At the Tools menu, select Converter ➔ Currency.
2. Press the Rate soft key. The Exchange Rate list for the
USD (U.S. Dollars) currency appears in the display.
3. Select the currency exchange rate
you want to change.
107
3. Press the Add soft key. The Add
Exchange Rate screen appears in
the display with the Base field
highlighted.
9. To save the new exchange rate,
press . The Exchange Rate list
for the USD (U.S. Dollars) currency
appears in the display with your new
exchange rate at the bottom of the
list.
4. Use the Left and Right navigation
keys to select the Base currency to
be converted from.
Currency — Erasing Exchange Rates
5. Highlight the Currency field.
You cannot erase the preloaded currencies from the Exchange
Rate list. You can erase a currency that you have added to the list
by doing the following:
6. Enter an identifier of up to 5
characters for the new currency
using the keypad. (For more
1. At the Tools menu, select Converter ➔ Currency.
2. Press the Rate soft key. The Exchange Rate list for the
USD (U.S. Dollars) currency appears in the display.
3. Highlight the currency exchange rate
7. Highlight the Exchange Rate field.
to be erased.
8. Enter a decimal exchange rate for the new currency using
4. Press the Erase soft key. You are
prompted to confirm the erasure.
•
To erase the highlighted exchange rate,
press the Yes soft key.
Note: Press the
key to enter the decimal point.
•
To keep the highlighted exchange rate,
press the No soft key.
The Exchange Rate field only accepts up to 5 digits after the decimal
point.
Tools
108
Tip Calculator
Tip Calculator automatically calculates the
following amounts:
•
•
Gratuity (tip)
Individual payment (for groups)
Calculations are based on the total amount
of the check, a selected percentage, and
the number of people paying.
1. At the Tools menu, select Tip Calculator. The Tip
Calculator screen appears in the display with the Bill field
highlighted.
2. Use the keypad to enter the total amount of the bill.
Note: To include a decimal point, press the
key.
3. If needed, highlight the Tip field and use the keypad to
change the tip percentage.
4. If needed, highlight the # Paying field and use the keypad
to change the number of persons paying.
5. The amount of the Tip, the bill Total, and the amount each
person should pay appear in the lower half of the screen.
109
Section 15: Changing Your Display Settings
This section shows you how to change your phone’s menu
appearance, display brightness and contrast, and display content
to better meet your needs.
Menu styles:
Accessing the Display Menu
To access the Display menu, do the following:
1. In standby mode, press Menu ( ), then select Display.
The Display menu appears in the display.
2. Use the Navigation key to show the available Main Menu
styles (which appear in the preview screen), then press
to save the displayed Main Menu style setting.
Tip: To launch the Display menu using a voice command — In standby
mode, press and hold
until the phone prompts, “Say a command.”
Say “Go to Display” into the microphone.
Wallpaper
2. Select the desired sub-menu. The following sections
describe the Display sub-menus in greater detail.
Wallpaper lets you choose the images that appear in the
background of your phone’s front and main displays while your
phone is closed or in standby mode.
Menu Style
1. At the Display menu, select Menu Style. The Menu Style
1. At the Display menu, select Wallpaper.
screen appears in the display showing the following Main
The following options appear in the display:
• Main Display
• Front Display
Changing Your Display Settings
110
The following options appear in the display:
Note: With the Front Clock and Main Clock set to their respective default
settings (Samsung and Digital), selecting a Wallpaper for either display
automatically changes that display’s Clock setting to Digital or Off
• Main Clock
• Front Clock
2. Select the Clock you wish to reformat. The following
Changing either Clock (Main Clock or Front Clock) to Digital/Analog
options appear in the display:
(Main Clock only) or Off (both Clocks) automatically changes the Clock
background to the respective default or current Wallpaper setting.
• Samsung — Main Clock only — The current time appears as
large numbers in a small window in the center of the display, all
against a blank background (no wallpaper).
2. Select the Display whose Wallpaper you wish to change.
The following options appear in the display:
• Digital — The current time appears as large numbers on the
second line from the top of the display (Main Clock) or in the center
of the display (Front Clock).
•
My Images — Lets you select a photo you’ve taken or an image
that you’ve downloaded from the Internet as a wallpaper image.
Preset Images — Lets you select an image that came preloaded
with your phone as a wallpaper image.
•
•
Analog — The current time appears as sweep hand positions on a
clock image. Individual hours appear as Roman numerals ( XII).
I
–
3. Select the image type that you wish to use. An array of
•
Off — The current time appears as small numbers on the second
line from the bottom of the display (Main Clock) or in the center of
the display with the Front Display Wallpaper in the background.
images appears in the display.
4. Select the image that you wish to use to save your
Note: With the Front Clock and Main Clock set to their respective default
settings (Samsung and Digital), selecting a Wallpaper for either display
automatically changes that display’s Clock setting to Digital or Off
respectively.
selection.
Clock Format
Clock Format lets you choose the format your phone will use to
present the current time in your phone’s front and main displays
while your phone is closed or in standby mode.
Changing either Clock (Main Clock or Front Clock) to Digital/Analog
(Main Clock only) or Off (both Clocks) automatically changes the Clock
background to the respective default or current Wallpaper setting. (For
1. At the Display menu, select Clock Format.
111
3. Use the Navigation key to show the available Clock
Formats (which appear in the preview screen), then press
to save the displayed Clock Format setting.
The following options appear in the display:
•
•
Normal
Large
2. Select the desired setting.
Theme
Banner
Lets you select the color theme used to display menu screens
and popup menus and messages. You can choose from a variety
of color themes.
Create your own personalized greeting that appears in the
display while your phone is in standby mode.
1. At the Display menu, select Banner.
1. At the Display menu, select Theme. The following options
are available:
Tip: Press and hold
to erase an existing banner, if necessary.
2. Enter a word or short phrase to appear in your phone’s
display while in standby mode (Up to 13 characters). (For
3. Press
to save the new banner.
Backlight
2. Use the Navigation key to show the available Color Themes
You can set the backlight for your display or keypad to remain on
for a specified period of time or remain on as long as the folder is
open.
(which appear in the preview screen), then press
save the displayed Color Theme setting.
to
Dialing Font Size
Lets you select the size of your dialing font.
Note: Prolonged backlight use drains your battery faster.
1. At the Display menu, select Dialing Font Size.
Changing Your Display Settings
112
1. At the Display menu, select Backlight. The following sub
menus appear in the display:
• Main Display — Sets the time the internal display backlight
remains on after a period of inactivity. Optional settings are: 10
seconds 15 seconds, 30 seconds, Always On, and Always Off.
,
• Keypad — Sets the amount of time the keypad backlight remains
on after a period of inactivity. Optional settings are: 10 seconds 15
seconds 30 seconds Always On, and Always Off
,
,
,
.
• Brightness — Sets the brightness of the backlight to one of five
possible settings.
2. Select the desired sub menu, then select the desired
setting.
Front Contrast
Front Contrast lets you choose the display contrast to suit
yourself.
1. At the Display menu, select Front Contrast.
2. Use the Left/Right navigation keys to sample any of the 51
display contrast settings from -50 to +50. The screen
shows the effects of each new setting.
•
To save the new setting and return to the Display menu, press
.
•
To return to the Display menu and discard the new setting, press
.
113
Section 16: Changing Your Sound Settings
This section shows you how to customize your phone’s audio
properties, such as ringers, keypad tones, alerts, shut down
sounds, and more.
•
•
Messages — Lets you set your phone to be silent, play a sound,
and/or vibrate in response to incoming messages.
Alarms — Lets you set your phone to be silent, play a sound, and/
or vibrate in response to a preset alarm time being reached.
Accessing the Sounds Menu
2. Select the desired option.
To access the Sounds menu, do the following:
1. In standby mode, press Menu ( ), then select Sounds.
The Sounds menu appears in the display.
3. Use the Navigation key or the Volume key (on the left side
of your phone) to change the volume level (Ringer Off,
Low, Low/Medium, Medium, Medium/High, High) or
vibrate mode (Vibrate, Vibrate/High) for the selected
option.
Tip: To launch the Sounds menu using a voice command — In standby
mode, press and hold
until the phone prompts, “Say a
command.” Say “Go to Sounds” into the microphone.
Tip: To preview the selected ringtone or alert tone while adjusting the volume
2. Select the desired sub-menu. The following sections
setting, press the Play soft key.
describe the Sounds sub-menus in greater detail.
4. Press
to save the volume level/vibrate mode.
Volume
Ringer Type
Use the Volume sub-menu to set the default volume for incoming
calls and alarms.
You can assign ring tones for calls, alarms, and other alerts in the
Ringer Type sub menu.
1. From the Sounds menu, select Volume. The following
1. From the Sounds menu, select Ringer Type. The following
options appear in the display:
Ringer Types appear in the display:
•
Voice Calls — Lets you set your phone to be silent, play a sound,
and/or vibrate in response to incoming calls.
•
Voice Calls
Changing Your Sound Settings
114
•
Messages
1. From the Sounds menu, select Alerts. The following
–
–
–
Text Message
Picture Message
Voicemail
options appear in the display:
•
Minute Beep — Sound an alert ten seconds before each elapsed
minute of a call.
2. Select the desired Ringer Type. The following options
•
Roaming — Sound an alert when you leave your home service
area while on a call.
appear in the display:
•
•
Call Connect — Sound an alert when you connect a call.
Power On/Off — Sound an alert when you turn your phone one or
off.
•
•
My Ringtones
My Sounds
2. Select the desired option. The following settings appear in
Note: Your phone includes preloaded ringtones and sounds. You can
download additional ringtones and sounds using easyedgeSM. (For
the display:
•
•
On
Off
3. Select the desired option. A list of ringtones or sounds
3. Highlight the desired setting.
appears in the display.
•
•
To save the new setting, press
To retain the current setting, press
.
4. Use the Navigation key to scroll through the ringtones and
.
sounds for the preferred ringer.
Key Tone
•
•
To play each ringtone or sound, press the Play soft key.
To save the desired ringtone or sound selection, press
Key Tone allows you to adjust the volume level and length of the
tone that the keypad generates each time you press a key.
.
Alerts
1. From the Sounds menu, select Key Tone. The following
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, and other
options.
options appear in the display:
•
•
Tone Level
Tone Length
115
2. Select the desired option.
•
If you select Tone Level:
–
To set the keypad Tone Level, use the Volume key or Navigation key.
–
To save your Tone Level setting, press . You are returned to the Key
Tone sub-menu.
•
If you select Tone Length
:
–
Highlight Short or Long.
–
To save your Tone Length setting, press . You are returned to the
Key Tone sub menu.
Changing Your Sound Settings
116
Section 17: Changing Your Call and Phone Settings
This section explains how to customize your call and phone
settings to suit your needs and preferences.
Location
This function identifies your location to the network via the Global
Positioning System (GPS). You can set this function for
continuous operation or to operate only in the event that you dial
911.
Accessing Your Call and Phone Settings
1. In standby mode, press Menu ( ), then select Settings.
Tip: To launch the Settings menu using a voice command — In standby
mode, press and hold
until the phone prompts, “Say a command.”
Note: Contact U.S. Cellular to determine whether, when, or where location-
Say “Go to Settings” into the microphone.
based services are available.
The Settings menu appears in the display showing the
1. At the Settings menu, select Location.
following options and sub-menus:
The following options appear in the display:
•
•
•
•
•
Location — Set your phone to send location data continually or
only when you dial 911.
Call Settings — Set how your phone handles voice and data
calls.
Phone Settings — Set your phone’s safety, network, and security
options.
Memory Info — Select where photos are stored, manage your
phone’s memory, and format and manage Memory Card storage.
Phone Info — Access information about your phone, such as your
phone number, meanings of phone status icons, hardware and
software versions, and more. (Some of this information is valuable
to you if you need to call for customer support.)
•
Location On — GPS location is on whenever you make or receive
a call, wherever the feature is available.
•
911 Only — GPS location is on only when you dial 911.
2. Select the desired Location setting. You’re returned to the
Settings menu.
Call Settings
The Call Settings options let you select how your phone handles
voice and data calls.
2. Select the desired option or sub-menu.
117
To access the Call Settings sub-menu, do the following:
Auto Answer
ᮣ
At the Settings menu, select Call Settings. The Call
Auto Answer enables your phone to automatically answer calls
after a period of time that you specify.
Settings sub-menu appears in the display.
The following sub-sections detail the available Call Settings.
Note: To use your TwoStep in Auto Answer mode, you must connect a
handsfree headset (wired or Bluetooth) or a Bluetooth Handsfree Kit to
your phone.
Call Answer
You can select a specific answer mode when you receive an
incoming call. Your phone can be preset to answer when you do
any of the following:
1. At the Call Settings sub-menu, select Auto Answer. The
following options appear in the display:
•
•
•
Press any key.
Press the Send key.
Open the flip.
•
•
Off — Disables automatic answering of calls.
After 1 Second — Phone automatically answers calls after 1
second.
After 3 Seconds — Phone automatically answers calls after 3
seconds.
After 5 Seconds — Phone automatically answers calls after 5
seconds.
•
•
1. At the Call Settings sub-menu, select Call Answer. The
Call Answer sub-menu with the following options appears
in the display:
2. Select the desired setting.
•
Any Key — Press any key except the
,
, or Left soft
key to answer an incoming call.
Note: Any setting other than Off causes the Auto Answer icon ( ) to display.
•
•
Send Key — Press
to answer an incoming call.
Flip Open — Open the flip to answer an incoming call.
Auto Retry
Tip: You can set your phone to answer calls automatically, without any input
Auto Retry automatically re-dials a number if the connection fails.
Depending upon your location, the number of times your phone
automatically dials the number may vary.
2. Select the method you wish to use for answering calls.
1. At the Call Settings sub-menu, select Auto Retry.
Changing Your Call and Phone Settings
118
The Auto Retry sub-menu with the following options
Note: The “Enabling TTY may impair headset use and non-TTY
accessory performance” message pops up when you select TTY
Mode.
appears in the display:
•
•
Off — Disables automatic redialing of numbers.
Every 10 Seconds — Phone automatically redials a number
every 10 seconds.
•
•
To access the TTY Mode options, press the Yes soft key.
To return to the Call Settings sub-menu, press the No soft key.
•
•
Every 30 Seconds — Phone automatically redials a number
every 30 seconds.
Every 60 Seconds — Phone automatically redials a number
every 60 seconds.
2. When you press the Yes soft key, the following options
appear in the display:
•
TTY Full — Enables TTY mode and disables microphone and
earpiece
2. Select the desired setting.
•
•
•
TTY + Talk — Enables TTY mode and microphone
TTY + Hear — Enables TTY mode and earpiece
TTY Off — Disables TTY mode
TTY Mode
Your phone is fully TTY compatible. TTY
equipment is connected to your phone
through the headset connector on the right
side of the phone. TTY Mode must be
enabled before you can use your phone with
a TTY device.
3. Select the desired TTY Mode setting.
Note: The TTY icon (
) appears in the top of the display when the phone is
in standby mode.
Voice Privacy
Note: Your TwoStep has a 3.5 mm headset connector. Contact your Wireless
Provider to determine whether you need an adapter for your TTY
device.
When Voice Privacy is enabled (that is, set to Enhanced), it turns
on advanced voice encryption.
1. At the Call Settings sub-menu, select Voice Privacy. The
1. At the Call Settings sub-menu, select TTY Mode. You are
prompted to confirm you want to change the current TTY
Mode setting.
following options appear in the display:
•
•
Standard — Voice privacy is disabled.
Enhanced — Voice privacy is enabled.
119
2. Select the Voice Privacy setting of your choice.
Phone Settings
The Phone Settings options let you tailor your phones basic
operations. To access the Phone Settings sub-menu, do the
following:
Data Settings
Use the Data Settings sub-menu to configure data connection
settings.
ᮣ
At the Settings menu, select Phone Settings. The Phone
1. At the Call Settings sub-menu, select Data Settings. The
Settings sub-menu appears in the display.
following options appear in the display:
The following sub-sections detail the available Phone Settings.
•
•
•
Data Off — No incoming data calls accepted.
Data For Next Call — Wait for data call for the next 10 minutes.
Data Until Powered Off — Data calls only, no voice calls
accepted, until you power the phone off and on again.
Airplane Mode
When set to On, Airplane Mode disables all radio functions of
your phone. This prevents you from receiving or making calls
(except emergency calls), but allows you to use other features
(such as the camera and the Tools) safely in sensitive
environments, such as on board an aircraft.
2. Select the data setting of your choice.
International Dialing
Use this option to select a frequently-dialed country code for
dialing by the International Dialing shortcut. (For more
1. At the Phone Settings sub-menu, select Airplane Mode.
The following options appear in the display:
•
•
On — Disables the radio transmitter and receiver in your phone
Off — Enables the radio transmitter and receiver in your phone
1. At the Call Settings sub-menu, select International
2. Select the desired Airplane Mode setting.
Dialing. A list of country codes appears in the display.
2. Select the country code of your choice.
Shortcut Key
Shortcut Key lets you set which feature, function, or application
launches when you press the Up navigation key while in standby
mode.
Changing Your Call and Phone Settings
120
1. At the Phone Settings sub-menu, select Shortcut Key.
Security
The following options appear in the display:
Use the Security sub-menu to lock your phone, set up emergency
numbers, enable or disable voice privacy, set restrictions, and
other security options.
•
•
•
•
•
•
•
•
•
•
•
My Images
My Ringtones
My Sounds
Inbox
To access the Security menu, do the following:
1. From the Settings menu, select Phone Settings
➔
Security.
Tools
The “Enter Code” prompt appears in the display.
Calculator
Tip Calculator
Converter
Calendar
Alarm Clock
Stop Watch
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone
number.
The “Enter Code” prompt disappears and the Security
2. Select the desired setting.
menu appears in the display.
Language
Lock Phone
The language option on your phone can change the language of
voice prompts, menus, and key-input.
Locking the phone limits all outgoing calls except calls to 911
emergency and the three user-programmable emergency
1. At the Phone Settings sub-menu, select Language. The
numbers. You can lock the phone manually during use, or set the
phone to lock automatically when it is turned on. With the phone
in lock mode, you can answer incoming calls, but you must
unlock the phone to place outgoing calls (except to emergency
and secret numbers).
following options appear in the display:
•
•
English
Español
2. Select your language preference.
1. At the Security sub-menu, select Lock Phone.
121
Emergency #
The following Device Lock Mode options appear in the
display:
Your phone provides the option of storing three emergency
numbers. Each number can be up to 32 digits in length. All
emergency numbers can be manually called at any time, even
when your phone is locked or restricted. This can be a useful
feature for controlling outgoing calls from your phone.
•
Lock — Locks the phone immediately. (The phone stays locked
until you enter the lock code.)
Unlock — Unlocks the phone.
On Power Up — The phone locks automatically the next time your
phone is powered on. (The phone stays locked until you enter the
lock code.)
•
•
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.
2. Select the Device Lock Mode option of your choice.
Change Lock
The default lock code for your phone is generally the last four
digits of your phone number. It is advisable to change the default
lock code to a secret code for security purposes.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
1. At the Security sub-menu, select Change Lock. You’re
prompted to enter the new lock code.
2. Enter the new lock code. You’re prompted to re-enter the
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
new lock code for verification.
3. Enter the new lock code again. Your changes are stored.
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
Store Emergency Numbers
1. At the Security sub-menu, select Emergency #.
2. Select from the three emergency number entries.
Changing Your Call and Phone Settings
122
3. Enter an emergency number (up to 32 digits in length).
4. Press to save the number that you entered.
Note: The default lock code is the last four digits of your mobile phone
number.
Call Emergency Numbers in Lock Mode
The “Erase All Entries?” prompt appears in the display.
1. In standby mode, enter the emergency number.
•
•
To erase all Contacts list entries, press the Yes soft key.
To keep the current Contacts list entries, press the No soft key.
2. Press
to place the call.
Restriction
Resetting Your Phone
Restriction lets you limit the use of your phone to make outgoing
calls and/or to receive incoming calls to any numbers, to no
numbers, or to calls from/to your Contacts.
Reset Phone returns all setup options to their factory default.
1. At the Security sub-menu, select Reset Phone. You are
prompted to confirm that you want to restore your phone’s
default settings (except for the Contacts and Voice Dial).
1. At the Security sub-menu, select Restriction. The
following options appear in the display:
•
•
To restore default settings, select Yes
To retain your current settings and return to the Security sub-
menu, select No
.
• Outgoing — Restrict/allow outgoing calls.
• Incoming — Restrict/allow incoming calls.
.
• Contacts — Restrict/allow all access to your Contacts list.
Erase All Entries
2. Highlight the desired Restriction and press
. The
Erase All Entries erases all information from your Contacts list.
following options appear in the display:
Note: To completely remove any personal information stored on your device,
• On — Restrict (block) selected calls.
• Off — No restriction on selected calls.
1. At the Security sub-menu, select Erase All Entries. You’re
Note: Default setting for all Restrictions is Off
.
prompted to enter the lock code again.
3. Select the desired setting.
123
NAM Selection
Set Time
The Network menu allows you to select NAM (Number
Assignment Module) settings for your phone. You can store two
NAM settings, which are essentially telephone numbers, for your
phone.
Use the Set Time option to set the current date and time.
Note: In digital service mode, the Set Time feature is disabled. The network
adjusts time and date automatically.
1. At the Phone Settings sub-menu, select NAM Selection.
1. At the Phone Settings sub-menu, select Set Time. The
The following options appear in the display:
following options appear in the display:
•
•
NAM1 — Your service contract has one phone line.
NAM2 — Your service contract has two phone lines.
•
•
Set Time
Set Date
2. Select the desired NAM option. The phone powers itself off
2. Select the desired option.
and back on.
For Set Time, the Set Time screen appears in the display.
System Select
•
Enter the current time using your keypad.
The hour and minute must be entered using two digits each and in 12-
hour format.
The System Select menu allows you to select the roaming
setting for your phone.
•
•
Use the Left and Right navigation keys to select AM or PM
.
1. At the Phone Settings sub-menu, select System Select.
Press to save the your time setting.
The following roaming options appear in the display:
For Set Date, the Set Date screen appears in the display.
•
Home Only — Your phone is available for normal operation only
within your designated coverage area.
Automatic — The Preferred Roaming List (PRL) is used to acquire
service. If no preferred systems are found, any digital system is
acquired.
•
•
Enter the current date using your keypad.
The month and day must be entered using two digits each. The
year must be entered using all four digits.
•
Press
to save your date setting.
2. Select the desired roaming option.
Changing Your Call and Phone Settings
124
Quick Search
correspond to the letters of the Contacts name.
For example, to search for “Sally” you could enter:
Quick Search is an easy way to locate Menu items and Contacts.
1. At the Phone Settings sub-menu, select Quick Search.
The following options appear in the display:
S
A
L
•
•
On — Quick Search is enabled
Off — Quick Search is disabled
2. Press the Up navigation key. The Find screen appears in
the display showing the Contacts entries with names that
correspond to your key entries.
2. Select the desired Quick Search setting.
Searching for a Menu Item
1. In standby mode, press the first few numeric keys that
correspond to the letters of the desired Menu item name.
3. Highlight the desired Contacts entry.
4. Press
to call the highlighted Contact.
For example, to search for “Inbox” you could enter:
PC Connection
Lets you select the default type of PC connection for exchanging
files with your TwoStep.
I
N
B
2. Press the Down navigation key. The Menu List screen
appears in the display showing all menu items with names
that correspond to your key entries.
Tip: For more information on using PC Connection, contact U.S. Cellular.
1. At the Phone Settings sub-menu, select PC Connection.
The following options appear in the display:
3. Select the desired menu item.
Searching for a Contact
• USB Mass Storage — This connection is activated automatically
when you connect an optional USB Data Cable, provided you have
installed an optional microSD Memory Card in your phone. (For
1. In standby mode, press the first few numeric keys that
125
• Bluetooth — This connection requires that you pair your PC and
The following storage options appear in the display:
•
Phone Memory — Saves the selected type of files in your
phone’s memory.
• No Connection — This option blocks your TwoStep from
connecting with a PC.
•
Card Memory — Saves the selected type of files in a removable
microSD memory card.
2. Select the preferred PC Connection type.
2. Select the desired storage location. “Save Options set
”
Memory Info
appears in the display, and you are returned to the Save
Memory Info lets you quickly and easily review and manage your
Options sub-menu.
phone memory usage. To access Memory Info, do the following:
Phone Memory
1. At the Settings sub-menu, select Memory Info. The
Memory Info screen appears in the display showing the
following options:
Lets you review your phone’s available memory and manage your
files stored there.
Memory Usage
• Save Options — Lets you specify whether your images and videos
will be stored in your phone or on an optional Memory Card.
Memory Usage lets you review your usage of your phone’s
memory.
• Phone Memory — Lets you review your phone’s available memory
and manage your files stored there.
1. At the Settings sub-menu, select Memory Info
➔
Phone
Memory ➔ Memory Usage. The Memory Usage screen
• Card Memory — Lets you review a removable Memory Card’s
available memory, manage your files stored there, and format new
Memory Cards.
appears in the display showing the following information:
•
•
•
•
•
Total Used memory usage
Available unused memory
My Images memory usage
My Ringtones memory usage
My Sounds memory usage
Save Options
Lets you specify where you want your images stored.
1. At the Settings sub-menu, select Memory Info
Options Images
➔
Save
➔
.
Changing Your Call and Phone Settings
126
•
•
Applications memory usage
PIC Msg memory usage
3. To move or copy image files to the Memory Card, do the
following:
2. Press
to return to the Phone Memory menu.
•
•
Press the Options soft key, then select Move
/
Copy
.
Freeing Memory
Highlight a file you want to move or copy, then press to mark
the file for moving or copying. (To mark all files for moving or
copying, press the Mark All soft key.)
Phone Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up
memory on your phone for reuse.
•
•
Press the Done soft key. You are prompted to confirm moving or
copying the selected file(s) to the Memory Card.
1. At the Settings sub-menu, select Memory Info
➔
Phone
To move or copying all marked files, press the Yes soft key. To keep
the marked files and return to the Move screen, press the No soft
key.
Memory ➔ My Images / Ringtones / Sounds sub-menu.
A list of all files in the related folder appears in the display.
4. To return to the My Images / Ringtones / Sounds sub-
menu, press
Files are listed by name, and each file entry shows the
name and size of each file.
.
Card Memory
2. To erase files, do the following:
Card Memory lets you review a removable, microSD Memory
Card’s available memory, manage your files stored there, and
format new microSD Memory Cards.
•
•
•
•
Press the Erase soft key or press the Options soft key, then select
Erase
.
Highlight a file you want to erase, then press to mark the file for
erasure. (To mark all files for erasure, press the Mark All soft key.)
Memory Usage
Press the Done soft key. You are prompted to confirm erasure of
the selected file(s).
Memory Usage lets you review your usage of your Memory
Card.
To erase all marked files, press the Yes soft key. To keep the
marked files and return to the Erase screen, press the No soft key.
1. At the Settings sub-menu, select Memory Info ➔ Card
Memory ➔ Memory Usage.
127
The Memory Usage screen appears in the display
•
•
Press the Done soft key. You are prompted to confirm erasure of
the selected file(s).
showing the following information:
To erase all marked files, press the Yes soft key. To keep the
marked files and return to the Erase screen, press the No soft key.
•
Total Used memory usage
•
Available unused memory
3. To move or copy image files to Phone Memory, do the
•
•
My Images memory usage
My Music memory usage
following:
2. Press
to return to the Card Memory menu.
•
•
Press the Options soft key, then select Move Copy.
/
Highlight a file you want to move or copy, then press to mark
the file for moving or copying. (To mark all files for moving or
copying, press the Mark All soft key.)
Freeing Memory
Card Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up
space on your Memory Card for reuse.
•
•
Press the Done soft key. You are prompted to confirm moving or
copying the selected file(s) to Phone Memory.
1. At the Settings sub-menu, select Memory Info ➔ Card
Memory ➔ My Images / Music sub-menu. A list of all
files in the related folder appears in the display.
To move or copying all marked files, press the Yes soft key. To keep
the marked files and return to the Move screen, press the No soft
key.
4. Press
to return to the My Images / Music sub-
Files are listed by name, and each file entry shows the
name and size of the file.
menu.
Formatting a Memory Card
2. To erase files, do the following:
Formatting a microSD Memory Card erases all data currently on
the card and creates multimedia directories compatible with your
phone.
•
Press the Erase soft key or press the Options soft key, then select
Erase
.
•
Highlight a file you want to erase, then press to mark the file for
erasure. (To mark all files for erasure, press the Mark All soft key.)
Caution!: Repeated formatting of a Memory Card shortens its service life.
Changing Your Call and Phone Settings
128
To format a Memory Card, do the following:
1. At the Settings sub-menu, select Memory Info ➔ Card
Memory ➔ Format Card. You are prompted to confirm
formatting of the Memory Card.
Icon Glossary
This option causes the Icon Glossary list to appear in the display
and show the icons that can appear in the display and the names
of the icons.
1. At the Settings menu, select Phone Info ➔ Icon
Glossary. A list of the icons that can appear on the top line
of the display shows in the display.
2. To format the Memory Card, press the Yes soft key.
To cancel formatting the Memory Card and return to the
Card Memory screen, press the No soft key.
2. Use the Up and Down navigation keys or the Volume key to
Phone Info
scroll through the icons list.
The Phone Info options show you the hardware and software
versions of your phone, definitions of the icons that appear at the
tops of the phone displays, and the phone number assigned to
your phone.
3. To return to the Phone Info menu, press
.
Version
You can view both the software and hardware version of your
phone using this feature. This feature is helpful if you need to
contact Customer Service.
Phone Number
This option causes the Phone Number screen to appear in the
display and show the ten-digit number assigned to your phone by
U.S. Cellular.
1. At the Settings menu, select Phone Info ➔ Version.
Your phone’s software (S/W), preferred roaming list (PRL),
1. At the Settings menu, select Phone Info ➔ Phone
Number. The phone number assigned by U.S. Cellular
appears in the display.
SM
easyedge (Easyedge), and hardware (H/W) information
appears in the display.
2. To return to the Phone Info menu, press
.
2. To return to the Phone Info menu, press
.
129
Section 18: Health and Safety Information
Thissectionoutlinesthesafetyprecautionsassociatedwithusing
yourphone.Thesesafetyprecautionsshouldbefollowedtosafely
use your phone.
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
For body worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
Health and Safety Information
130
contains no metal and that positions the handset a minimum of
1.5 cm from the body.
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
information.
•
CDMA mode:
UL Certified Travel Adapter
–
Head: 1.0 W/kg
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
–
Body-worn: 0.782 W/kg
•
PCS mode:
–
Head: 1.11 W/kg
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
–
Body-worn: 1.35 W/kg
SAR information on this and other model phones can be viewed
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
131
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
What is FDA's role concerning the safety of wireless
phones?
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
Under the law, FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
Health and Safety Information
132
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
•
•
•
Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
•
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
133
cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don't know with certainty what the results of such
studies mean for human health.
provide data that is directly applicable to human populations, but
ten or more years' follow-up may be needed to provide answers
about some health effects, such as cancer.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do -
may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF).
However, none of the studies can answer questions about long-
term exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The Project has also helped develop a series of
public information documents on EMF issues.
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies can
Health and Safety Information
134
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
away from your body or use a wireless phone connected to a remote
antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000.
•
If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to
limit wireless phone use by children was strictly precautionary; it
135
was not based on scientific evidence that any health hazard
exists.
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that hands-
free kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
Health and Safety Information
136
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
•
•
•
International Commission on Non-Ionizing Radiation Protection:
National Radiation Protection Board (UK):
US Food and Drug Administration:
Road Safety
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/1/2006):
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
•
•
•
•
•
FCC RF Safety Program:
1. Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
Environmental Protection Agency (EPA):
Occupational Safety and Health Administration's (OSHA):
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
National Institute for Occupational Safety and Health (NIOSH):
World Health Organization (WHO):
137
3. Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes
from the road. If you get an incoming call at an
7. Do not engage in stressful or emotional conversations that
may be distracting. Make people you are talking with
aware you are driving and suspend conversations that
have the potential to divert your attention from the road.
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving;
if necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice and even heavy
traffic can be hazardous.
8. Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
or medical emergencies.
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1 or
other local emergency number, as you would want others
to do for you.
5. Do not take notes or look up phone numbers while driving.
Jotting down a "to do" list or flipping through your address
book takes attention away from your primary
responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try
to plan calls when your car will be stationary. If you need to
make a call while moving, dial only a few numbers, check
the road and your mirrors, then continue.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see a
broken-down vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
number.
Health and Safety Information
138
"The wireless industry reminds you to use your phone safely when
driving."
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
For more information, please call 1-888-901-SAFE, or visit our
web-site www.ctia.org
.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
You should follow some commonsense recommendations when
using any portable audio device:
Provided by the Cellular Telecommunications & Internet
Association.
•
Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
Responsible Listening
•
When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cellular telephones, at high volume settings for long durations
may lead to permanent noise-induced hearing loss. This includes
the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound
has also been associated in some studies with tinnitus (a ringing
in the ear), hypersensitivity to sound and distorted hearing.
•
•
Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, you
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
139
•
•
Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
Bethesda, MD 20892-2320
Voice: (301) 496-7243
Email: [email protected]
You can obtain additional information on this subject from the
following sources:
National Institute for Occupational Safety and Health
Hubert H. Humphrey Bldg.
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
200 Independence Ave., SW
Washington, DC 20201
Voice: (800) 222-2336
Voice: 1-800-35-NIOSH (1-800-356-4647)
Email: [email protected]
Internet: http://www.audiology.org
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger.
When connecting the phone or any accessory to another device,
read its user's guide for detailed safety instructions. Do not
connect incompatible products.
Health and Safety Information
140
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
•
•
Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place;
Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless phone with such a device, consult your health care
provider.
UsingYourPhoneNearOtherElectronicDevices
For more information see:
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
Persons who have such devices:
•
Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
Should not carry the phone in a breast pocket;
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are
more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
•
•
Should use the ear opposite the implantable medical device to
minimize the potential for interference;
141
The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users find phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the rating on their
box or a label located on the box.
is considered acceptable for normal use. A sum of 6 is
considered for best use.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
T3
+
T2
=
5
M3
+
M2
=
5
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with "normal usage" while
using their hearing aid with the particular wireless phone.
"Normal usage" in this context is defined as a signal quality that
is acceptable for normal operation.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than
phones that are not labeled. T4 is the better/higher of the two
ratings.
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together. A sum of 5
Health and Safety Information
142
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
Vehicles
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Emergency Calls
Switch your phone off in any facility where posted notices require
you to do so.
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
143
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
FCC Notice and Cautions
FCC Notice
To make an emergency call:
1. If the phone is not on, switch it on.
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
3. Press the
key.
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
Cautions
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
phone warranty if said accessories cause damage or a defect to
the phone.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
Health and Safety Information
144
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
Other Important Safety Information
•
Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
•
•
•
Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
If you're inside a building, being near a window may give you
better reception.
Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
Understanding the Power Save Feature
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
•
•
Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
Understanding How Your Phone Operates
Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
145
Maintaining Your Phone's Peak Performance
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
Battery Standby and Talk Time
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
•
To ensure that the Hearing Aid Compatibility rating for your phone is
maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call. For more information,
Battery Precautions
•
If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
•
Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
•
•
•
Do not hold, bend or twist the phone's antenna, if applicable.
Do not use the phone if the antenna is damaged.
If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
•
•
Never use any charger or battery that is damaged in any way.
Do not modify or remanufacture the battery as this could result in
serious safety hazards.
•
•
Speak directly into the phone's receiver.
Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
•
If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
•
Follow battery usage, storage and charging guidelines found in the
user’s guide.
Health and Safety Information
146
•
Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below
0 °C (32 °F).
•
•
If left unused, a fully charged battery will discharge itself over time.
•
•
Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
•
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
•
Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
•
•
•
Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
•
Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
•
•
Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
147
•
•
•
Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
•
•
•
•
•
Keep the phone and all its parts and accessories out of the reach of
small children.
Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
•
If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
•
Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
•
•
Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
Health and Safety Information
148
Section 19: Warranty Information
Standard Limited Warranty
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
Phone
1 Year
Batteries
1 Year
Leather Case
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
149
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-987-
4357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
•
•
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
•
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
Warranty Information
150
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
151
Precautions for Transfer and Disposal
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
©
2008 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Warranty Information
152
Index
Making a Call — Number Entry
Dialing 20
Zoom 83
Camera Settings
Card Memory
Formatting 128
Management 127
Contacts
Numerics
Camera
Camera Options
Brightness 83
A
Adding Contacts
Adjust
Alerts 115
B
Battery
Charging 6
Installing 4
Removing 5
Adding 41
Deleting 51
Editing 43
Finding 39
C
Call Functions
Quality 80
Resolution 79
153
Contacts Groups
Add 50
Erase 51
Editing Contacts
I
F
Finding Contacts
L
Rename 50
Create a Draft Message 62
D
Display Setting
Display Settings
Backlight 112
M
Memo Pad
Memory Card
Fun Tools
Formatting 128
Remove 9
Banner 112
Memory Card (Optional)
Install 8
Message Settings
Text 66
Theme 112
G
Games 86
Getting Started
H
Wallpaper 110
Messages
E
SM
HAC 141
154
Receive 53
Settings 65
Types 52
microSD™
Formatting 128
Install 8
Remove 9
Mode
Camera 19
Handsfree 18
Lock 19
Silent 18
Speakerphone 18
Standby 17
Vibrate 18
M-Ratings 142
Language 121
Security 121
Photos
Sending 85
Picture Messages
Receiving 58
Settings 66
P
Personal Organizer
Calculator 105
Phone
Features 10
R
Modes 17
Roaming 32
View,Closed 10
Version 129
Phone Memory
S
N
Phone Settings
155
157
|