SGH-x426m
Portable Digital Telephone
User Manual
Please read this manual before operating your phone,
and keep it for future reference.
Printed in Korea
Code No: GH68-06583A
English 02/2005
wb_x426m_021505_d2
Samsung Telecommunications America, L.P.
U.S. He a d q ua rte rs:
1301 Ea st Lo o ko ut Drive
Ric ha rd so n, TX 75082
Te l: 972-761-7000
Fa x: 972-761-7001
Custom e r Ca re Ce nte r:
1601 E. Pla no Pa rkwa y
Suite 150
Pla no , TX 75047
Te l: 888-987-HELP (4357)
Fa x: 972-761-7501
Inte rne t Ad d re ss: http :/ / www.sa m sung usa .c o m /
wire le ss
©2005 Samsung Telecommunications America. All
rights reserved. No reproduction in whole or in part
allowed without prior written approval. Samsung is
a registered trademark of Samsung Electronics
America, Inc. and its related entities.
iii
iv
Phone Layout ..................................................................................... 7
Display ............................................................................................. 10
Making a Call ................................................................................... 21
Speed-dialing ................................................................................... 39
Table of Contents
1
Calls Received .................................................................................. 65
Calls Made ....................................................................................... 65
Call Barring ..................................................................................... 93
Table of Contents
2
Alert Type ...................................................................................... 106
Folder Tone .................................................................................... 107
Alerts on Call ................................................................................. 108
Extra Tones .................................................................................... 108
Audio .............................................................................................. 131
Graphics ......................................................................................... 131
Table of Contents
3
Security .......................................................................................... 138
PIN ................................................................................................. 150
PUK ................................................................................................ 150
PIN2 ............................................................................................... 151
PUK2 .............................................................................................. 151
Road Safety .................................................................................... 164
Table of Contents
4
♦Standard battery
♦Car power charger
♦Holster
♦Ear microphone
♦Leather Case
♦Data kit
♦Battery charger cradle
Unpacking
6
Key(s)
Description
In Menu mode, scroll through the
menus.
In Idle mode, allows you to access
your favorite menus directly. For more
information about shortcuts, see
In Menu mode, the Left key returns to
the previous menu level and the Right
key selects the next menu.
In Idle mode, allows you to access
your favorite menus directly. For more
information about shortcuts, see
Perform the functions indicated by the
text above them, on the bottom line of
the display.
(soft keys)
In Idle mode, launches the WAP
(Wireless Application Protocol)
browser.
Your Phone
8
Key(s)
Description (Continued)
Makes or answers a call.
When held down in Idle mode, recalls
the last number dialed or received.
In Menu mode, selects a menu
function or stores information that you
have entered, such as a name in the
phone or SIM memory.
Deletes characters from the display.
In Menu mode, returns to the previous
menu level.
Ends a call. Also switches the phone
on and off when held down.
In Menu mode, cancels your input
and returns to Idle mode.
When held down in Idle mode,
accesses your voice mail.
Enter numbers, letters and some
special characters.
Your Phone
9
Key(s)
Description (Continued)
Enter special characters.
Perform various functions.
(on the side of the phone)
During a call, adjusts the earpiece
volume.
In Idle mode, adjusts the keypad tone
volume.
In Menu mode, scrolls through the
menus and Phonebook.
Display
Display Layout
The display has three areas:
Your Phone
10
Area
Description
First line
Displays various icons. See
Middle lines
Displays messages,
instructions, and any information
that you enter, such as the
number you are dialing.
Last line
Shows the functions currently
assigned to the two soft keys.
Your Phone
11
Icons
Icon
Description
Shows the received signal strength. The
greater the number of bars, the better
the signal.
If this icon is gray, you are outside your
network area and are restricted to
emergency calls only.
Appears when you are connected to the
GPRS network.
Appears when a call is in progress.
Appears when you set an alarm to ring at
a specified time.
Appears when you are entering text to
indicate the current text input mode.
Appears when a new text message is
received.
Appears when a new multimedia
message is received.
Your Phone
12
Icon
Description
Appears when a new voice mail
message is received.
Appears when Mute mode is active.
Appears when Silent mode is active or
you set the Alert Type menu (Menu
6.4), so that the phone vibrates when
you receive a call. For further details,
Shows the level of your battery. The
more bars you see, the more power you
have left.
Backlight
A backlight illuminates the display and the keypad. When
you press any key or open the folder, the backlight turns
on. It turns off when no keys are pressed within a given
period of time, depending on your setting in the Back
Light menu (Menu 9.1.5). After one minute, the display
turns off to conserve your battery power.
To specify the length of time the backlight is active, set the
page 136 for further details.
Your Phone
13
Service Light
The service light is at the top right-hand corner of the
phone. It flashes when services are available on the
phone.
To activate or deactivate the use of the service light, set
on page 136 for further details.
Your Phone
14
Getting Started
Installing the SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available and many others.
Important! The plug-in SIM card and its contacts can be
easily damaged by scratches or bending, so be careful
when handling, inserting or removing the card.
Keep all SIM cards out of the reach of small children.
1. If necessary, turn off the phone by holding down the
key until the power-off image displays.
2. Remove the battery. To do so:
• Press and hold the battery lock above the battery upward
toward the top of the phone.
3. Lift the battery away, as shown.
Getting Started
15
4. Slide the SIM card into the SIM card socket so that it
locks the card into place. Make sure the gold contacts
of the card face into the phone.
Note: When you need to remove the SIM card, slide it, as shown, and take it
out of the socket.
Getting Started
16
5. Place the battery so that the tabs on the end align with
the slots at the bottom of the phone.
6. Press the battery until it clicks into place. Make sure
that the battery is properly installed before switching
the phone on.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. A
travel adapter comes with your phone for charging the
battery. Use only approved batteries and chargers. Ask
your local Samsung dealer for further details.
You can use the phone while the battery is charging, but
this causes the phone to charge more slowly.
Getting Started
17
Note: You must fully charge the battery before using your phone for the first
time. A discharged battery is fully recharged in approximately 200 minutes.
1. With the battery in position on the phone, plug the
connector of the travel adapter into the jack at the
bottom of the phone.
2. Plug the adapter into a standard AC wall outlet.
3. When charging is finished, unplug the adapter from the
power outlet and disconnect it from the phone by
pressing the gray tabs on both sides of the connector
and pulling the connector out.
Getting Started
18
Note: You must unplug the adapter before you remove the battery from the
phone during charging; otherwise, the phone could be damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of talk
time remain, you hear a warning tone and a message
repeats at regular intervals on the display. When this
happens, your phone turns off the backlight to conserve
the remaining battery power.
When the battery level gets too low, the phone
automatically turns off.
Switching the Phone On/Off
1. Open the folder.
2. Press and hold the
key until the phone switches on.
3. If the phone asks you to enter the phone password,
enter the password and press the OK soft key or key.
The phone password is factory set to “00000000.” For
further details, see “Change Password” on page 139.
4. If the phone asks for a PIN, enter the PIN and press the
Getting Started
19
The phone searches for your network and after finding it,
the idle screen displays. Now, you can make or receive a
call.
Note: The display language is preset to English at the factory. To change the
language, use the Language menu (Menu 9.4). For further details, see
5. When you wish to switch the phone off, press and hold
the
key until the power-off image displays.
Getting Started
20
Call Functions
Making a Call
When the idle screen displays, enter the area code and
phone number, and press the
key.
Note: When you activate the Auto Redial option in the Extra Settings menu
(Menu 9.6), the phone automatically redials up to ten times when the person
does not answer the call or is already on the phone.
Making an International Call
1. Press and hold the
key.
The + character appears.
2. Enter the country code, area code, and phone number
and press the
key.
Call Functions
21
Correcting the Number
To clear
Press the
the last digit
displayed
key
any other digit Left or Right key until the cursor
in the number is immediately to the right of the
digit to be cleared. Press the
key. You can also insert a
missing digit simply by pressing
the appropriate key.
the whole
display
key and hold it for more
than one second.
Ending a Call
When you want to finish your call, briefly press the
key.
Redialing the Last Number
The phone stores the numbers you dialed, received or
page 65 for further details.
To recall any of these numbers:
1. If you have typed characters on the display, press the
key to return to Idle mode.
2. Press the
key to display a list of the last numbers in
the order you made or received.
Call Functions
22
3. Use the Up and Down keys to scroll through the
numbers until the number you want highlights.
To
Press the
dial the number
edit the number
key.
Options soft key or key
and select Edit. Then
change the number,
referring to “Correcting
delete the number Options soft key or key
and select Delete.
delete all of the
numbers
Options soft key or key
and select Delete All.
Making a Call from Phonebook
You can store frequently used phone numbers in the SIM
card or the phone’s memory, which are collectively called
Phonebook. Simply select a name to recall the associated
number. For further details about the Phonebook features,
Adjusting the Volume
During a call, if you want to adjust the earpiece volume,
use the Volume keys on the left side of the phone.
Call Functions
23
Press the
key to increase the volume level and the
key to decrease the level.
In Idle mode, you can also adjust the keypad tone volume
using these keys.
Answering a Call
When somebody calls you, the phone rings and displays
the incoming call animation.
When the caller can be identified, the caller’s phone
number, or name if stored in your Phonebook, displays.
1. If necessary, open the folder. Press the
key or the
Accept soft key to answer the incoming call.
If the Anykey Answer option in the Extra Settings menu
(Menu 9.6) is activated, you can press any key to answer a
call except for the key and the Reject soft key.
If the Open to Answer option in the Extra Settings menu
Menu 9.6) is activated, you can answer the call simply by
opening the folder.
(
Call Functions
24
Note: To reject an incoming call, press and hold the Volume keys on
the left side of the phone before opening the folder, or press
the Reject soft key or
key.
2. End the call by closing the folder or pressing the
key.
Note: You can answer a call while using the Phonebook or menu features.
Viewing Missed Calls
When you are unable to answer a call for any reason, you
can find out who is calling you, if this service is available,
so that you can call the person back.
The number of calls you missed displays on the idle
screen immediately after a call is missed.
To view the missed call immediately:
1. If the phone is closed, open the folder.
2. Press the View soft key.
The number corresponding to the most recent missed call
displays, if available.
To
Press the
scroll through the
missed calls
Up or Down key.
call the number
displayed
key.
edit or delete a missed
call number
Select soft key or
Call Functions
25
Editing a Missed Call Number
Note: When the number corresponding to the missed call is not available, the
Edit option does not display.
3. Press the Options soft key or
key.
4. Press the Up or Down key to highlight the Edit option.
5. Press the Select soft key or
key.
6. Change the number.
To
Press the
call the number
key.
Save soft key or
store the number
key
and enter the name and
location.
For further details, see
Deleting a Missed Call
1. Press the Options soft key or key
.
2. If necessary, press the Up or Down key to highlight the
Delete option.
3. Press the Select soft key or key.
You can press the
Call feature.
key at any time to exit the Missed
Call Functions
26
Note: You can access the Missed Call feature at any time by selecting the
Missed Calls menu (Menu 1.1).
Quickly Switching to Silent Mode
Silent mode is convenient when you wish to stop the
phone from making noise, in a theater for example.
In Idle mode, press and hold the
key until the “Silent
Mode” message and the Vibration icon ( ) display.
When you exit Silent mode, your phone changes the
sound settings as follows:
Option
New Setting
Alert Type (Menu 6.4)
Vibration
Keypad Tone (Menu 6.5)
Message Tone (Menu 6.6)
Folder Tone (Menu 6.7)
Power On/Off (Menu 6.8)
Extra Tones (Menu 6.10)
Off
Vibration
Off
Vibration
Off
To exit and reactivate the previous sound settings, press
and hold the key again until “Exit Silent Mode” appears.
The Vibration icon ( ) no longer displays.
Note: Menu 6.8 Power On/Off vibration occurs during power on not power off.
Call Functions
27
Call Functions
28
Selecting Functions and Options
Your phone offers a set of functions that allow you to
customize your phone. These functions are arranged in
menus and sub-menus, accessed using the two soft keys
marked
and . Each menu and sub-menu allows you
to view and alter the settings of a particular function.
The roles of the soft keys vary according to the function
you are currently using; the label on the bottom line of the
display just above each key indicates its current role.
Press the left soft key for
Menu mode.
Press the right soft key
for Phonebook.
To view the various functions and options available and to
select the one you want:
Selecting Functions and Options
29
1. Press the appropriate soft key.
To
Press the
select the:
Select soft key or
• function displayed
• option highlighted
the key.
view the next function Down key or key
or highlight the next
option on a list
on the left side of the
phone.
move back to the
previous function or
option on a list
Up key or key on
the left side of the
phone.
move back up one
level in the structure
Left key, soft key
or
key.
exit the structure
without changing the
settings
key.
In some functions, you may be asked for a password or
PIN. Enter the code and press the OK soft key or key.
Note: When you access a list of options, your phone highlights the current
option. If, however, there are only two options, such as On/Off or Enable/
Disable, your phone highlights the option that is not currently active so that you
can select it directly.
Selecting Functions and Options
30
Phonebook
You can store phone numbers and their corresponding
names in your SIM card and phone’s memories. They are
physically separate but are used as a single entity, called
Phonebook.
Storing a Number with a Name
There are two ways to store a number:
• Using the Save soft key or
key in Idle mode
• Using the New Entry option in the Phonebook menu
Storing a Number in Idle Mode
When you enter a number, Save appears above the left
soft key to allow you to store the number in Phonebook.
1. Enter the number you want to store.
Note: If you make a mistake while entering a number, correct it using
the
key.
2. To save the number, press the Save soft key or key.
3. Select an icon to identify the category of the number to
be stored. Three categories are available:
•
•
•
: Mobile phone number
: Office number
: Home number
To select the category, press the Left or Right key and press
the Select soft key or key.
4. Choose either SIM Memory or Phone Memory to
store the number.
Phonebook
31
5. Enter a name and press the OK soft key or key.
The maximum length you can enter for a name depends on
your SIM card.
Note: When you change phones, any numbers stored in your SIM
card memory are automatically available with the new phone,
whereas any numbers stored in the phone’s memory must be
reentered.
6. Press the OK soft key to store the name and number.
The new Phonebook entry displays.
To
Press the
use the entry options
Options soft key.
For further details,
return to the idle screen
key.
Storing a Number Using the Phonebook Menu
1. At the idle screen, press the Name soft key.
2. Scroll to New Entry by pressing the Up or Down key
and press the Select soft key.
3. Select an icon to identify the category of the number to
be stored by pressing the Left or Right key, and press
the Select soft key or key.
Note: The E-mail icon is available in this step. It allows you to save an E-mail
address instead of a phone number.
Phonebook
32
4. Choose either SIM Memory or Phone Memory to
store the number. Press the Select soft key or key.
5. Enter a name and press the OK soft key or key.
The maximum length of a name depends on your SIM card.
6. Enter a number or address you want to store and press
the Save soft key or key.
Using Phonebook Entry Options
While accessing any Phonebook entry, press the Options
soft key to use the options for the entry.
To
Press the
select the
Select soft key or the Left
highlighted option key.
highlight a different Up or Down key until the
option
option you want highlights.
The following options are available:
Paste: allows you to paste the number into the normal
dialing mode. Use this option to dial a number similar to
one in Phonebook, such as a different extension in the
same office.
Use the
page 22 for further details. When you are ready to dial,
press the key.
key to change the number as required; see
Edit: allows you to edit the name and/or number.
Delete: allows you to erase the name and number from
Phonebook. You are asked to confirm that you wish to
erase the name and number by pressing the Yes soft key.
Phonebook
33
Copy: allows you to copy the number to another location.
You can select the memory and the location number.
Caller Group: allows you to organize your Phonebook
entry in caller groups so that the phone alerts you in a
specific way when a person from one of your groups calls
you. Select one of the ten groups available.
To remove an entry from a group, select the No Group
option.
For more information about how to change caller group
properties, see page 37.
Add Entry: allows you to add a new number to the
currently selected name.
Dialing a number from Phone book
Once you have stored phone numbers in Phone book, you
can dial them easily and quickly by using the location
numbers that were assigned to them in Phone book.
Note: If you cannot remember a location number, you need to go into the
Search menu in the Phone Book menu to search for the entry by name. For
Dialing a number from the SIM card
1. In Idle mode, enter the location number for the phone
number you want to dial and press the key.
The list of entries in the SIM card appears.
2. You can press the Up or Down key to find other
numbers on the list.
3. Press the Dial soft key,
key, or key when you have
selected the number you want.
Phonebook
34
Dialing a number from the phone’s memory
1. In Idle mode, press and hold the 0 key. A + appears.
2. Enter the location number of the phone number you
want and press the key.
3. The list of entries in the phone’s memory appears.
4. You can press the Up or Down key to find other
numbers on the list.
5. Press the Dial soft key,
key, or key when you have
selected the number you want.
Searching for a Number in Phonebook
After storing numbers in Phonebook, you can search for
them in two ways; by name and by caller group.
Searching for a Number by Name
1. At the idle screen, press the Name soft key.
2. Press the Select soft key or key when Search
highlights. You are asked to enter a name.
3. Enter the first few letters of the name.
The Phonebook entries are listed, starting with the first
entry matching your input.
Phonebook
35
To
Press the
view the highlighted View soft key.
entry
select a different
entry
Up or Down key until
the entry you want
highlights.
look for a name
starting with a
different letter
key labeled with the
letter you want.
4. Once you have found the entry, press the
key to
dial the number, or press the Options soft key or key
to access the Phonebook entry options; for further
details, see page 33.
Searching for a Number by Caller Group
1. When the idle screen displays, press the Name soft
key.
2. Scroll to Group Search by pressing the Up or Down
key and press the Select soft key. You are asked to
enter a group name.
3. Enter the first few letters of the group name that you
wish to find.
The caller groups are listed, starting with the first group
matching your input.
Phonebook
36
4. Scroll to the group you want by pressing the Up or
Down key and press the View soft key or key.
The Phonebook entries in the caller group are listed.
To
Press the
view the
highlighted entry
View soft key or key.
select a different Up or Down key until the
entry entry you want highlights.
5. Once you have found the entry, press the
key to
dial the number, or press the Options soft key or key
to access the Phonebook entry options; for further
details, see page 33.
Editing a Caller Group
1. When the idle screen displays, press the Name soft
key.
2. Scroll to Group Edit by pressing the Up or Down key
and press the Select soft key or key.
3. Scroll through the group list by pressing the Up or
Down key.
4. When the group you want highlights, press the Options
soft key or key.
5. Select each option and change the settings, as
required. The following options are available:
Phonebook
37
•
•
Call Ring Tone: allows you to set the ring tone to be used
when you receive a voice call from a person in the group.
SMS Tone: allows you to set the ring tone to be used
when you receive a text message from a person in the
group.
•
•
Graphic: allows you to set the graphic icon to be
displayed when you receive a voice call from a person in
the group.
Group Name: allows you to assign a name to the group.
For further details about how to enter characters, see
6. When you are finished, press the
or
key.
Deleting all of the Phone Book entries
You can delete all of your entries from your phone’s
memory, your SIM card or both.
1. When the idle screen displays, press the Name soft key.
2. Scroll to Delete all by pressing the Up or Down key
and press the Select soft key or key.
3. To place a check mark by the memory location you
want to empty, All, SIM memory, or Phone memory,
press the key.
You can remove the check mark by pressing the
again.
key
4. Press the Delete soft key to delete the entries in the
selected memory location.
5. Enter the phone password and press the OK soft key or
key.
Phonebook
38
Note: The password is preset to “00000000” at the factory. To
6. When the confirmation message appears, press the
Yes soft key or key.
To cancel the deletion, press the No soft key.
7. When you are finished, press the C or
key.
Speed-dialing
Once you have stored phone numbers in the SIM card or
phone memory, you can set up to eight speed-dial entries
and then dial them easily whenever you want, simply by
pressing the associated number key.
Setting Up Speed-dial Entries
1. At the idle screen, press the Name soft key.
2. Scroll to Speed Dial by pressing the Up or Down key
and press the Select soft key or key.
3. Select the key to which you wish to assign the speed-
dialing number, from the
to
keys, and press
the OK soft key or key.
Note: Memory location 1 is reserved for your Voice Mail server
number.
Note: If you have already assigned a number to the key, the Options
soft key replaces the OK soft key. Go to step 6.
4. Select a Phonebook entry and press the View soft key
or key.
Phonebook
39
5. Select a number if the entry has more than one
number, by pressing the Up or Down key and press the
Select soft key or key.
6. Once you have assigned a number to the selected key,
you can use the following options by pressing the
Options soft key or key:
•
•
•
•
Change: allows you to assign a different number to the
key.
Delete: allows you to clear the setting so that no number
is assigned to the key.
Delete All: allows you to clear the settings for all keys so
that no numbers are assigned to any of the keys.
Number: allows you to view the number assigned to the
key.
7. When you are finished, press the
or
key.
to
Speed-dialing from Phonebook
To speed-dial the numbers assigned to keys
press and hold the appropriate key.
,
Checking the Memory Status
You can check how many names and numbers are stored
in Phonebook; SIM card and phone memories. You can
also see the capacity of both memories.
1. When the idle screen displays, press the Name soft
key.
2. Select the Memory Status option.
Phonebook
40
3. Press the Up or Down key to view the number of
existing and remaining entries in the card and phone’s
memory.
4. When you are finished, press the
or
key.
Using the service dialing numbers
You can view the list of Service Dialing Numbers (SDN)
assigned by your service provider. These numbers include
emergency numbers, directory enquiries and voice mail
numbers.
1. When the idle screen displays, press the Name soft
key.
2. Select the SDN option by pressing the Up or Down key
and press the Select soft key or key.
3. To dial the number displayed, press the Dial soft key,
key, or key.
Phonebook
41
Phonebook
42
Entering Text
When using your phone, you often need to enter text, such
as when storing a name in Phonebook, creating your
personal greeting or scheduling events on your calendar.
You can enter alphanumeric characters by using your
phone’s keypad.
Your phone has the following text input modes:
♦T9 mode
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more
than one letter; for example, when you press the
once, J, K or L displays. The T9 mode automatically
compares your keystrokes with an internal linguistic
key
dictionary to determine the correct word, thus requiring far
fewer keystrokes than the traditional upper/lower-case
character modes.
♦Upper/lower-case character modes
These modes allow you to enter letters by pressing the
key labeled with the letter you want to enter once, twice,
three or four times until the letter displays.
♦Symbol mode
This mode allows you to enter symbols, such as
punctuation marks.
♦Number mode
This mode allows you to enter numbers.
Changing the Text Input Mode
When you are in a field that allows characters to be
entered, you will notice the text input mode indicator on
the display.
Entering Text
43
Using T9 Mode
T9 is a predictive text input mode that allows you to key in
any character using single keystrokes. This text input
mode is based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word by
pressing the
to
keys. Press each key only once
for each letter.
Example:To enter “Hello” in T9 mode, press the
and keys.
,
,
,
The word you are typing appears on the display. It may
change with each key that you press.
2. Enter the whole word before editing or deleting the
keystrokes.
3. When the word displays correctly, go to step 4.
If not, press the
, Up or Down key to display alternative
word choices for the keys that you have pressed.
Example:Both “Of” and “Me” have the and
keys.
The phone displays the most commonly used choice first.
4. Put a space by pressing the
the next word.
key and start entering
♦To type words not found in T9 mode, change the text
input mode to the upper/lower-case character input
mode.
♦To enter full stops, hyphens or apostrophes, press the
key. T9 mode applies grammar rules to ensure
that the correct punctuation is used.
Entering Text
45
Note: Example: The
punctuation marks:
key is used twice to display two
L
e
t
’
s
e
a
t
.
♦To shift the case in T9 mode, use the key. There are
two cases: Lower Case ( ) and Capital Lock ( ).
♦You can move the cursor by using the Left and Right
keys. To delete letters, press the
hold the key to clear the display.
To add a new word into the T9 dictionary:
key. Press and
1. After pressing the keys corresponding to the word you
want to add, press the 0 key or Up or Down key to
display the alternative words.
2. When you press the 0 key or Up or Down key at the
last alternative word, the display shows Add on the
bottom line. Press the Add soft key or key.
3. If necessary, clear the word using the C key and enter
the word you want to add using Alphabet mode. See
4. Press the OK soft key or key.
5. The word is added to the T9 dictionary and becomes
the first word for the associated keypress series.
Note: This feature may not be available for some languages.
Entering Text
46
♦To enter periods, hyphens, or apostrophes, press the 1
key. T9 mode applies grammar rules to ensure that
correct punctuation is used.
♦You can move the cursor by using the Left and Right
keys. To delete letters, press the C key. Press and hold
the C key to clear the display.
Using the Upper/Lower-Case Character Mode
Use the
to
keys to enter your text.
1. Press the key labeled with the letter you want:
- Once for the first letter
- Twice for the second letter
- And so on
2. Select the other letters in the same way.
3. To shift the case in Character mode, use the key.
Note: The cursor moves to the right when you press a different key. When
entering the same letter twice or a different letter on the same key, just wait for
a few seconds for the cursor to move to the right automatically, and then select
the next letter.
Entering Text
47
See the following table for more information about the
characters available:
♦To insert a space, press the key.
♦You can move the cursor by using the Left and Right
keys. To delete letters, press the
key. Press and
hold the
key to clear the display.
Using Number Mode
Number mode enables you to enter numbers into a text
message. Press the keys corresponding to the digits you
want to enter.
Using Symbol Mode
Symbol mode enables you to insert symbols into a text
message.
Entering Text
48
To
Press the
select a symbol
corresponding number key.
Up or Down key.
display more symbols
clear the symbol(s)
C key. When the input field is
empty, this key returns the
display to the previous mode.
insert the symbol(s) into
your message
OK soft key or key.
cancel your input and
return to the previous
mode
Back soft key.
Entering Text
49
Entering Text
50
Options During a Call
Your phone provides a number of control functions that
you can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you want.
You can make another call while you have a call in
progress if your network supports this service.
To place a call on hold, simply press the Hold soft key. You
can reactivate the call whenever you want, by pressing the
Unhold soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or look it
up in Phonebook.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or
1. Put the current call on hold by pressing the Hold soft
key.
2. Make the second call in the normal way.
To switch between the two calls, simply press the Swap
soft key.
The current call is placed on hold and the call on hold is
reactivated so that you can continue conversing with the
other party.
End each call normally by pressing the
key.
Options During a Call
51
Using the Menu Functions
During a call, you can access the main menu functions.
1. Press the Options soft key.
2. Press the OK soft key when the Menu option highlights.
3. Press the Up or Down key to scroll through the menu
list.
Note: You cannot use some menus during a call. They are deactivated on this
list.
4. When the menu you want highlights, press the Select
soft key.
5. If the selected menu has sub-options, repeat steps 3
and 4.
For further details about the menu functions available, see
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone off,
so that the other party cannot hear you.
Example: You wish to say something to another person in
the room but do not want the person on the phone to hear
you.
To switch the microphone off temporarily:
1. Press the Options soft key.
2. If necessary, press the Down key to highlight the Mute
option.
Options During a Call
52
3. Press the OK soft key or key. The other person can
no longer hear you.
To switch the microphone back on:
1. Press the Options soft key.
2. If necessary, press the Down key to highlight the
Unmute option.
3. Press the OK soft key or key. The other person can
hear you again.
Muting/Sending Key Tones
These options allow you to turn the key tones off or on. If
the Mute keys option is selected, your phone does not
transmit the key tones. It allows you to press keys without
hearing annoying key tones during a call.
Note: To communicate with answering machines or computerized telephone systems,
the Send keys option must be selected.
Sending Tones
This option allows you to send the correct type of tones if
you need to enter a password or account number when
calling an automated system, such as a bank. To send
tones:
1. Press the Options soft key.
2. Highlight the Send DTMF option.
3. Press the OK soft key or key.
4. Enter the required number and press the OK soft key
or key.
Options During a Call
53
Searching for a Number in Phonebook
You can search for a number in Phonebook during a call.
1. Press the Options soft key.
2. Press the Down key to highlight the Phonebook
option.
3. Press the OK soft key or key.
The Phonebook entries are listed.
4. Enter the name that you wish to find.
If you enter the first few letters of the name, the Phonebook
entries are listed, starting with the first entry matching your
input.
5. To view the highlighted entry, press the View soft key or
key.
For further details about the Phonebook feature, see
Call Waiting
You can answer an incoming call while you have a call in
progress, if this service is supported by the network and
you have set the Call Waiting menu (Menu 3.3) to
of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the
key to answer the incoming call. The first
call is automatically put on hold.
Options During a Call
54
2. To switch between the two calls, press the Swap soft
key.
3. To end a call on hold, press the Options soft key and
select the End Held Call option.
4. To end the current call, press the
key.
Making a Multi-party Call
A multi-party call is a network service that allows up to six
people to take part simultaneously in a multi-party or
conference call.
For further details about subscribing to this service,
contact your service provider.
Setting up the Multi-party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first
call is automatically put on hold.
3. To join the first participant to the multi-party call, press
the Options soft key and select Join. Press the OK
soft key or key.
4. To add a new person to the multi-party call, call the
person in the normal way and then press the Options
soft key. Select the Join option and press the OK soft
key.
You can add incoming callers by answering the call and
pressing the Options soft key and selecting Join. Repeat
as required.
Options During a Call
55
Having a Private Conversation With One Participant
1. Press the Options soft key and choose the Select one
option. Press the OK soft key.
The list of call participants appears.
2. Highlight a person by pressing the Up or Down key, and
press the Select soft key or the
key or key.
3. When the Private option highlights, press the OK soft
key or key.
Now you can talk privately to that person. The other
participants can continue to converse with each other.
4. To return to the multi-party call, press the Options soft
key and select Join. Press the OK soft key or key.
All of the multi-party call participants can now hear each
other.
Dropping One Participant
1. Press the Options soft key and choose the Select one
option. Press the OK soft key or key
.
The list of call participants appears.
2. Highlight a person by pressing the Up or Down key, and
press the Select soft key or the
key or key.
3. Press the Down key to select the Remove option and
press the OK soft key or key.
The call ends with that participant, but you can continue to
talk to the other participants.
Options During a Call
56
4. When you want to end the multi-party call, close the
folder or press the key.
Options During a Call
57
Options During a Call
58
Using the Menus
You can tailor the phone’s range of functions to your needs
using menus and sub-menus. Menus and sub-menus can
be accessed by scrolling using the Navigation keys or by
using the shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key.
2. Scroll using the Up and Down keys to reach a main
menu, Phone Settings for example. Press the Select
soft key or key to enter the menu.
3. If the menu contains sub-menus, Language for
example, you can access them by scrolling and
pressing the Select soft key or key.
If the menu that you have selected contains further options,
repeat this step.
To
Press the
scroll through the
menus
Up or Down keys or use
the and
keys.
confirm the
Select soft key or key.
chosen setting
return to the
previous menu
level
key or the Right soft
key.
Using the Menus
59
To
Press the
exit the menu
without changing
the settings
key.
Accessing a Menu Function by Using Its Shortcut
The menu items, such as menu, sub-menus and options,
are numbered and can be accessed quickly by using their
shortcut numbers. The shortcut number is shown at the
bottom right next to the soft key on the display. Simply
press the Menu soft key and enter the number of the
menu you want.
Note: The numbers assigned to each menu are indicated on the list on the next
page. They may not match the menu number on the phone, depending on the
services supported by your SIM card.
Example: Accessing the Language menu.
4. Press the Menu soft key.
5. Press the
6. Press the
key for Phone Settings.
key for Language.
The languages available display.
List of Menu Functions
The following list shows the menu structure available and
indicates the number assigned to each option and the
page where you can find a description of each feature.
Using the Menus
60
Note: If you use a SIM AT card that provides additional services, the SIM AT
menu displays when you press the Menu soft key to enter Menu mode. For
further details, see your SIM card instructions.
1. Recent Calls
1.1 Missed Calls
1.2 Calls Received
1.3 Calls Made
1.4 Voice Mail
1.5 Delete All
1.6 Call Time
1.6.1 Last Call
1.6.2 Total Made
1.6.3 Total Received
1.6.4 Reset Timers
2. Messaging
2.1 Text Messages
2.1.1 Inbox
2.1.2 Outbox
2.1.3 Write New
2.1.4 Templates
2.1.5 Settings
2.1.6 Delete All
2.1.7 Memory Status
2.1.8 Broadcast*
2.2 Multimedia Messages
2.2.1 Inbox
2.2.2 Outbox
2.2.3 Download
2.2.4 Draft
2.2.5 Write New
2.2.6 Templates
2.2.7 Delete All
2.2.8 Memory Status
2.2.9 Setup
2.2.0 MMS Profile
2.3 IM
Using the Menus
61
2.4 Push Messages
2.4.1 Inbox
2.4.2 Receive
2.4.3 Delete All
3. Network Serives
3.1 Call Forwarding
3.1.1 Forward Always
3.1.2 Busy
3.1.3 No Reply
3.1.4 Unreachable
3.1.5 Cancel All
3.2 Call Barring*
3.3 Call Waiting
3.4 Network Selection*
3.5 Caller ID
3.6 Closed User Group*
4. Games
4.1 BubbleSmile
4.2 Fun2Link
4.3 MobileChess
4.4 Ultimate Golf Challenge
5. Download
6. Sound Settings
6.1 Ring Tone
6.2 Ring Volume
6.3 Download
6.4 Alert Type
6.4.1 Light Only
6.4.2 Melody
6.4.3 Vibration
6.4.4 Vibra+Melody
6.5 Keypad Tone
6.6 Message Tone
Using the Menus
62
6.6.1 SMS Tone
6.6.2 SMS-CB Tone*
6.6.3 MMS Tone
6.7 Folder Tone
6.8 Power On/Off
6.9 Alerts On Call
6.0 Extra Tones
7. Applications
7.1 Alarm
7.1.1 Once Alarm
7.1.2 Daily Alarm
7.1.3 Wake-Up Call
7.1.4 Remove Alarm
7.1.5 Autopower
7.2 Calendar
7.3 Time & Date
7.3.1 Set Time
7.3.2 Set Date
7.3.3 World Time
7.3.4 Time Format
7.3.5 Auto Update
7.4 Calculator
7.5 To Do List
7.6 Voice Memo
7.6.1 Record
7.6.2 Memo List
7.6.3 Delete All
7.6.4 Memory Status
7.7 Currency Exchange
7.8 SIM-AT*
8. My Browser
8.1 My Browser
8.1.1 Home
8.1.2 Favorites
8.1.3 http://
8.1.4 Settings
Using the Menus
63
8.1.5 Clear Cache
8.2 Audio
8.3 Graphics
8.4 Delete All
8.5 Memory Status
9. Phone Settings
9.1 Display Settings
9.1.1 Wallpaper
9.1.2 Menu Style
9.1.3 Download
9.1.4 Brightness
9.1.5 Back Light
9.1.6 Service Light
9.1.7 Graphic Logo
9.2 Greeting Message
9.3 Own Number
9.4 Language
9.5 Security
9.5.1 PIN Check
9.5.2 Change PIN
9.5.3 Phone Lock
9.5.4 Change Password
9.5.5 Privacy
9.5.6 SIM Lock
9.5.7 FDN Mode
1
9.5.8 Change PIN2*
9.6 Extra Settings
9.7 Short Cut
9.8 Reset Settings
1.
*
Shows only if supported by your SIM card.
Using the Menus
64
Recent Calls
In this menu, you can view the:
♦calls you missed, received or dialed.
♦length of your calls.
♦cost of your calls.
Note: You can access the numbers in the three types of call records by
pressing the
key in Idle mode.
Missed Calls
This menu lets you view the numbers of the last 20
unanswered calls.
The number and name, if available, display together with
the date and time when the call was received.
By pressing the Options soft key or key, you can:
♦delete the call from the list.
♦edit the number, if available, and save it in Phonebook.
You can also dial the number by pressing the
key.
Calls Received
This menu lets you view the last 20 numbers of the calls
you answered.
The number and name, if available, display, together with
the date and time when the call was received.
By pressing the Options soft key or key, you can:
♦delete the call from the list.
♦edit the number, if available, and save it in Phonebook.
You can also dial the number by pressing the
key.
Calls Made
This menu lets you view the last 20 numbers you dialed.
Recent Calls
65
The number and name display, together with the date and
time when the call was made.
By pressing the Options soft key, you can:
♦delete the number.
♦edit the number and save it in Phonebook.
You can also dial the number by pressing the
key.
Voice Mail
This menu provides you with a way of accessing your
voice mailbox, if provided by your network.
The following options are available:
Connect to Voice Mail: before using the Voice Mail
feature, you must enter the voice server number obtained
from your service provider. You can then select this option
and press the OK soft key or key to listen to your
messages.
You can connect to the voice server by pressing and
holding the
key in Idle mode.
Voice Mail Number: allows you to change the voice mail
server number, if necessary.
To
Press the
enter the server number correspondingnumeric
keys.
correct a digit
C key.
move the cursor to the Left or Right key.
left/right without
clearing the digit
Recent Calls
66
Note: Voice Mail is a network feature. Please contact your
service provider for further details.
Delete All
You can delete all of the numbers stored in each call
record category.
Use the key to select a call record using the Up or Down
key and press then Delete soft key. When a confirming
message appears, press the Yes soft key or key.
Call Time
This menu lets you view the timers for calls you made and
received.
Note: The actual time invoiced for calls by your service provider may vary,
depending on network features, such as rounding-off for billing purposes.
The following options are available:
Last Call: length of the last call.
Total Made: total length of all calls you made since the
timer was last reset.
Total Received: total length of all calls you received since
the timer was last reset.
Reset Timers: option used to reset the call timers. You
must first enter the phone password and then press the
OK soft key or key.
Note: The password is preset to “00000000.” To change this password, see
Recent Calls
67
Recent Calls
68
Messaging
In this menu, the following menu options are explained:
♦Text Messages
♦Multimedia Messages
♦Push Messages
Text Messages
Short Message Service (SMS) allows you to send and
receive short text messages to and from other GSM
mobile phones. In addition, your phone supports the
Enhanced Messaging Service (EMS), which enables you
to include simple pictures, melodies, and animated images
in your messages. To use this feature, you must subscribe
to your service provider’s message service.
When the Message icon (
) appears, you have received
new text messages. When the memory is full, an error
message displays and you cannot receive any new
messages. Use the Delete option in each message box to
delete obsolete messages.
Inbox
This message box is used to store the messages that you
have received.
When you enter this menu, the list of messages displays
with the senders’ phone numbers or names, if available in
your Phonebook.
1. Select a message from the list and press the View soft
key or
key to read the message contents.
Messaging
69
2. To scroll through the contents, press the Up or Down
key.
3. To scroll to the previous message press the
press the key for the next message.
key or
While reading a message, you can choose the following
options by pressing the Options soft key or key:
Delete: allows you to delete the message.
Forward: allows you to resend the message. For further
information about how to send a message, see page 72.
Reply: allows you to reply to the sender by sending a text
message.
Call Back: allows you to call the sender back.
Save Address: allows you to extract the sender’s number
and URL, e-mail addresses or phone numbers from the
message text, so that you can save them in your phone’s
memory.
Move to Phone: allows you to move the message to
another memory location, from the SIM card to the
phone’s memory or vice versa.
Select Objects: allows you to save media items, such as
sounds or images, from the message into your phone’s
memory. You can then use the items when writing a
message. For details, see page 73.
Outbox
This message box is used to store the messages that you
have already sent or will send.
When you enter this menu, the list of messages in the box
displays with the recipients’ phone numbers or names, if
available in your Phonebook.
Messaging
70
1. Select a message from the list and press the View soft
key or key to read the message contents.
2. To scroll through the contents, press the Up or Down
key.
3. To scroll to the previous message press the
press the key for the next message.
key or
While reading a message, you can choose the following
options by pressing the Options soft key or key:
Delete: allows you to delete the message.
Send: allows you to resend the message. For further
information about how to send a message, see page 72.
Save Address: allows you to extract the destination
number and URL, e-mail addresses or phone numbers
from the message text, so that you can save them in your
phone’s memory.
Move to Phone: allows you to move the message to
another memory location, from the SIM card to the
phone’s memory or vice versa.
Select Objects: allows you to save the media items, such
as sounds or images, from the message into your phone’s
memory. You can then use the items when writing a
message. For details, see page 73.
Write New
In this menu, you can write and send a text message.
Note: When you add media items to the message, the number of characters
you can enter decreases.
Messaging
71
Creating a Simple Text Message
1. Create your message.
Note: For more information about entering characters, see “Entering
Text” on page 47.
2. When you finish entering your message, press the
Options soft key or key. The following options are
available:
•
•
•
Send Only: allows you to send the message. The
message is deleted after sending.
Save and Send: allows you to save a copy of the
message to the Outbox and then send the message.
Save Only: allows you to save the message in the Outbox
so that it can be sent later.
• For more information about the Text Formatting, Add
Objects, Add Templates, Add Phonebook, Add
3. Select Send or Save and Send, and press the Select
soft key or key.
If you only want to save the message, select Save. After
saving the message, the phone returns to the Messages
menu.
4. If you select a save option, select a location and press
the OK soft key or key.
5. Enter a destination number and press the OK soft key
or key. The message is sent.
Note: When the phone fails to send the message, it asks you if you want to
retry. Press the OK soft key or
key to confirm. Otherwise, press the Exit soft
key to return to the message screen.
Messaging
72
Creating a Message Using the Options
1. Create your message.
2. Press the Options soft key or key.
3. Select one of the following options by using the Up and
Down keys and pressing the Select soft key or key.
•
Text Formatting: allows you to format the style of the
text.
• For the Size attribute, Normal
are available. For the Underline and Strikethrough
attributes, select On or Off
,
Large and Small sizes
.
The attributes can be combined.
•
Add Objects: allows you to add a sound, melody, picture
or animated image to your message. Select the category
of the item to be added. In each category, you can select
from the various factory-set items or choose an item
received from other sources, such as the Internet or other
phones.
•
Add Templates: allows you to apply one of the preset
message templates to the text. Select one of the five
messages stored in the Templates menu. For further
details, see page 74.
•
•
•
Add Phonebook: allows you to add a Phonebook entry to
your message. Select one from the list.
Add Bookmark: allows you to add a web page’s address
stored in your Favorite list. Select one from the list.
Language: allows you to change the language to be used
in T9 input mode. Select the language to be used.
4. Complete the message, and send or save it by
following the procedure from step 2 on page 72.
Messaging
73
Templates
Using this menu, you can preset messages that you use
most frequently.
Select an empty location or the message template you
want and press the Select soft key or key.
The following options are available:
Edit: allows you to write a new message or edit the
message.
Note: For further details about how to enter characters, see “Entering Text” on
page 47.
Send Message: allows you to retrieve the message. Once
you have completed the message, you can send, save and
send, or simply save it. For details about how to send a
message, see page 71.
Delete: allows you to delete the message. You are asked
to confirm the deletion by pressing the Yes soft key or
key.
Settings
In this menu, you can set up default message information.
A setting group is a collection of settings required to send
messages. The number of setting groups available
depends on the capacity of your SIM card.
Note: The last setting you accessed is automatically activated for sending
messages.
Service Center: allows you to store or change the number
of your message center, which is required when sending
Messaging
74
messages. You must obtain this number from your service
provider.
Default Destination: allows you to store the default
destination number. The number automatically displays on
the Destination screen when you create a message.
Default Type: allows you to set the default message type
to Text, Fax, Email or Paging. The network can convert
the messages into the selected format.
Default Validity: allows you to set the length of time your
text messages are stored at the message center while
attempts are made to deliver them.
Setting Name: allows you to give a name to the setting
group currently being defined.
Setting x (where x is the setting group number): each
group has its own sub-menu.
Common Setting: The following options are available:
Reply Path: allows the recipient of your message to send
you a reply message using your message center, if your
network supports this service.
Delivery Reports: allows you to activate or deactivate the
report function. When this function is activated, the
network informs you whether or not your message has
been delivered.
Bearer Selection: allows you to choose either GSM or
GPRS, depending on your network.
Character Support: allows you to choose a character type
from GSM-Alphabet, Uni-Code or Automatic. If you
select Uni-Code and your recipient’s phone does not
support it, your recipient may not be able to read your
message.
Messaging
75
Delete All
This menu allows you to delete all of the text messages in
each message box separately. You can also delete all of
your messages at one time.
To
Press the
select a message box
to clear
Up or Down key. To delete all of
your messages, select All
messages.
place or remove a
check mark
key.
delete the marked
objects
Delete soft key.
When a confirmation message displays, press the Yes soft
key or key to confirm.
Memory Status
You can check how many messages are currently stored
in the SIM and phone memories.
Press the Up or Down key to view the number of
messages you stored and the total number of messages
you can store in the SIM and phone memories.
Broadcast
This network service allows you to receive text messages
on various topics, such as the weather or traffic. Cell
Broadcasting (CB) messages display as soon as they are
received, provided that:
Messaging
76
♦the phone is in Idle mode.
♦the Receive option is set to Enable.
♦the message channel is currently active on the channel
list.
The following options are available:
Read: lets you view the message. Volatile displays the
messages from the network, but loses its contents as
soon as the phone is switched off. Scroll through the
message using the Up and Down keys. While reading a
message, press the Save soft key to store the message in
the Archive box for later retrieval.
Receive: allows you to enable or disable the reception of
broadcast messages.
Channel List: allows you to indicate the channels from
which you wish to receive cell broadcast messages. The
following options are available:
Select: used to enable or disable channels on the list by
marking or unmarking them respectively.
Add Channel: used to enter the ID and title for a new
channel.
Delete: used to remove a channel from the list.
Edit: used to change the ID and title of an existing
channel.
Language: allows you to select your preferred language
to be used when displaying cell broadcast messages.
Please contact your service provider for more information.
Multimedia Messages
Multimedia Message Service (MMS) is a messaging
service very similar to Short Message Service (SMS). It
provides automatic and immediate delivery of personal
Messaging
77
multimedia messages from phone to phone or from phone
to e-mail. In addition to the familiar text content of text
messages, multimedia messages can contain images and
graphics. An MMS message is a multimedia presentation
in a single entry. It is not a text file with attachments. Using
the MMS feature, your phone can receive multimedia
messages. You can also send picture messages, which
are short messages that contain images, such as your
photos or graphics you downloaded from the Internet. This
function is available only if it is supported by your service
provider. Only phones that offer picture message features
can receive and display picture messages.
Inbox
Viewing a Message When You Receive it
When a new multimedia message comes in, the display
shows the text notification along with the sender’s number.
1. Press the View soft key or
key to view the message.
The display shows brief information about the message,
such as the sender’s number, the message size and the
subject. If you want to view the message later in the Inbox,
press the Exit soft key.
2. To scroll through the message information, press the
Up or Down key.
While viewing the information, press the Options soft key
or key to use the following options:
If you are viewing a new message, the options are the
same as when you view a message as soon as you
receive it.
Messaging
78
When you are reviewing message, the following options
are available:
● Retrieve: retrieves the message from the MMS
server.
● Delete: deletes the message.
● More properties: shows you detailed information
about the message.
3. To read the message, press the Select soft key or
key when Retrieve is highlighted.
Your phone retrieves the message contents from the server
and displays it.
4. To scroll through the message, press the Up or Down
key.
When you are finished, press the
key
Viewing a Received Message in the Inbox
When you access the Inbox menu option, the list of
multimedia messages you received displays with the
senders’ phone numbers, if they are available in your
Phonebook, or subjects.
♦
♦
♦
: MMS notifications that have been opened.
: MMS notifications that are unopened.
: MMS notifications that you sent an enquiry to the
MMS server for retrieving the message.
♦
♦
: MMS notifications that the phone is retrieving the
messages from the MMS server.
: MMS notifications that the phone couldn’t retrieve
the message.
Messaging
79
♦
♦
: Messages that have been opened.
: Messages that are unopened.
1. Select a message on the list and press the Select soft
key or key
.
The message displays and scrolls to the next page, if it has
one, after a specified time.
2. Press the OK soft key or key to go to the message
view screen.
Or, the display automatically switches to the screen.
3. To scroll through the message, press the Up or Down
key.
If the message has more than one page, you can scroll
through the pages by using the Left and Right keys.
4. To scroll to the previous or next message, press the
or
key.
While viewing a message, you can choose the Message
options by pressing the Options soft key or key.
If you are viewing a new message, the options are the
same as when you view a message at the time of its
receipt. See the previous section.
When you are reviewing a message retrieved from the
MMS server, the following options are available:
Delete: deletes the message.
Reply: allows you to reply to the sender by sending a text
or multimedia message.
Call back: allows you to call the sender.
Messaging
80
Cut address: allows you to extract the sender’s number or
e-mail address and URL, other e-mail addresses or phone
numbers from the message text.
Forward: allows you to forward the message to another
person.
Save picture: allows you to save an image from the
message into your phone. Images are stored in the
Graphics folder (Menu 8.3).
Save sound: allows you to save a sound from the
message into the Audio folder (Menu 8.2).
Properties: shows you information about the message,
such as the subject, sender’s e-mail address or phone
number, message size, recipient’s e-mail address or
phone number, its priority, and the time and date the
message was received.
Outbox
When you access this menu option, the list of the picture
messages you sent or saved displays.
♦
♦
♦
♦
♦
: Messages currently being sent
: Messages sent
: Messages your phone couldn’t send
: Messages to be sent
: Messages deferred
1. Select a message and press the Select soft key or
key to view the message contents.
2. Press the OK soft key or key to go to the message
view screen.
Messaging
81
3. To scroll through the message, press the Up or Down
key.
If the message has more than one page, you can scroll
through the pages by using the Left and Right keys.
4. To scroll to the previous or next message, press the
or
key.
While viewing a message, you can choose the following
options by pressing the Options soft key or key:
Delete: allows you to delete the message.
Save address: allows you to extract the destination
numbers or e-mail addresses and URL, e-mail addresses
or phone numbers from the message text.
Send: allows you to send/resend the message.
Edit message: allows you to change the message
contents, sound, image, or text.
Information: shows you information about the message,
such as the status, subject, sender’s e-mail address or
phone number, message size, transaction ID, MMS
version, and the time and date the message was sent.
Download
This menu allows you to access the web site preset by
your service provider to download images or sounds.
Once you have downloaded sounds or images, they are
saved in the Audio folder (Menu 8.2) or Graphics folder
(Menu 8.3) respectively.
Messaging
82
Draft
This menu option allows you to create a message and
save it as a draft to send at a later time.
Write New
This menu option allows you to create a new picture
message and then send it to multiple destinations.
Creating and Sending a Picture Message
1. Enter the subject of your message and press the OK soft
key or
key.
For further details about entering characters, see page 40.
2. When Add here highlights, press the Options soft key
or key and add the message contents using one of
the following options:
•
Add text: enter the message text and press the OK soft
key or key.
•
Add picture: allows you to add a photo stored in the
Graphics folder (Menu 8.3). You can add downloaded
images if they are in correct format and your service
provider supports them.
•
•
Add sound: allows you to add a sound file. Select Record
to record a new voice memo or Sound list to add one of
the voice memos stored in the phone. You can add
downloaded sounds if your service provider supports
them.
Send: allows you to send the message. Use this option
when you have finished creating the message.
Messaging
83
•
•
Save: saves the message in the Draft
(Menu 2.2.4) or
Templates Menu 2.2.6) box for later use.
(
Settings: allows you to change the message settings. For
further details about each setting option, see page 74.
After changing the settings, you need to press the
key or the key to go to back to the options screen.
soft
C
•
•
Add: allows you to enter destination numbers or
addresses. See steps 6 to 11. After adding them, you need
to press the
soft key or the
C
key to go to back to the
options screen.
Preview: shows the message you created.
Note: You can add text, an image, and a sound only once for each
page.
3. Repeat step 2 until you have finished creating your
message.
4. If you want to change the added items, press the Up or
Down key to highlight one and press the Options soft
key or key.
Note: Available options are different, depending on whether the item
you select on the message screen is text, an image, a sound,
or the Page field.
The following options are available:
•
Edit text/picture/sound: allows you to change the text
or replace the image or sound with another one.
•
Add page: allows you to add more pages. After you add a
page, the display shows you the current page number and
the memory space used for the page. You can move to
each page using the Left or Right key on the message
screen.
•
Delete: deletes the item from your message.
Messaging
84
•
Duration: allows you to set when and how long text, an
image, a sound, or a page displays on the message
presentation screen. If the duration you set is shorter than
the content duration (for example, the length of sound
clip) for a particular page, the content duration is
automatically decreased.
•
•
Send: allows you to send the message.
Save: saves the message in the Draft
(Menu 2.2.4) or
Templates Menu 2.2.6) box for later use.
(
•
•
•
Settings: allows you to change the message settings. For
further details about each setting option, see page 74.
Add destination: allows you to enter destination
addresses. See steps 6 to 11.
Preview: shows the message you created.
5. When you have finished creating the message, choose
Send and press the Select soft key or key.
6. Select a destination type, To, Cc, or Bcc, and press the
Select soft key or key.
7. Choose one of the following options and press the
Select soft key or key:
•
•
•
Phone number: allows you to enter the phone number
you want.
E-Mail Address: allows you to enter the e-mail address of
the recipient.
Phone book: allows you to retrieve a number from your
Phone Book.
8. Enter a number or an e-mail address, or select a
number from Phone Book.
Messaging
85
9. When the correct number or address displays, press
the OK soft key or key.
10.To add a destination, press the Select soft key or key
when Add highlights. Repeat from step 7.
If you want to edit the destinations, select one and press the
Select soft key or
key. You can change or delete it.
11.To enter additional numbers or addresses to the other
destination types, press the C key or the soft key and
repeat steps 6 through 10.
You can enter up to 10 destinations each for To
,
Cc, and
Bcc
.
12. When you have finished entering the destinations,
select Send message and press the Select soft key or
key.
Your phone sends the message.
Templates
This menu stores messages you saved as templates so
that you can use them to make new messages.
1. Scroll through the template list using the Up and Down
keys.
2. When the message template you want highlights, press
the Select soft key or key.
3. Press the OK soft key or key to access the following
options, or the display automatically shows the options
after a specified time:
Messaging
86
•
•
Edit message: allows you to send a message using the
template. For further details about how to send a
Delete: allows you to delete the message template. You
are asked to confirm the deletion by pressing the Yes soft
key or
key.
Press the
key to return to Idle mode.
Delete All
This menu allows you to delete all of the multimedia
messages in each message box separately. You can also
delete all of your messages at one time.
To
Press the
select a message box Up or Down key. To delete all
to clear
of your messages, select All
messages.
place or remove a
check mark
key.
delete the marked
messages
Delete soft key.
When a confirmation message displays, press the Yes
soft key or key to confirm.
Memory Status
This menu shows how many messages are currently
stored in the phone memory.
Messaging
87
Setup
You can change the default message settings.
Turn a give option on or off, press the Select soft key to
place or remove a check mark on each option
The following options are available:
Delivery Report: When this option is checked, the
network informs you whether or not your message has
been delivered.
Read Reply: When this option is checked, your phone
sends a request for a reply along with your message to the
recipient.
Auto Download: When this option is checked, your phone
automatically downloads the received pictures or sounds.
Off: you need to manually download new messages by
using the Retrieve option.
On: the phone automatically retrieves new messages from
the server. As soon as you receive a message you can
further details about the options.
Message Acceptance: you can specify the category of
messages you want to receive.
Expiry Date: When this option is selected, you can select
the expiry time limit you would like the message to display.
Delivery time: you can set a time delay before the phone
sends your messages.
Priority: you can select the priority level of your
messages.
Report allowed: when this option is enabled, the sender
of an incoming message receives a delivery report from
the network.
Messaging
88
Page duration: you can set the length of time one page of
an incoming message displays on the message
presentation screen. After a specified time, the display
automatically scrolls to the next page.
MMS Profile
In this menu, you can configure various settings that are
required when you send or receive multimedia messages.
The following options are available:
Profile Name: Name that you wish to assign to the MMS
server.
Connection URL: Address of your MMS server.
Security: Data transmission mode. Choose Secure to
protect your data against unauthorized access; otherwise,
choose Non-Secure.
IP Address: Gateway address required to connect to
the MMS server.
User Name: User ID required to connect to the MMS
server.
Password: Password required to connect to the MMS
server.
APN: Access point name used for the address of the MMS
server. For further details, contact your service provider.
Push Message
This menu option allows you to receive and access web
messages from the server.
The following options are available:
Inbox: allows you to read the messages received from the
web server.
Messaging
89
Receive: allows you to set whether or not your phone
receives web messages.
Delete All: allows you to delete all of the web messages.
Messaging
90
Network Services
These menu functions are network services. Please
contact your service provider to check their availability and
subscribe to them, if you wish.
Call Forwarding
This network service enables incoming calls to be
rerouted to the number that you specify.
Example:You may wish to forward your business calls to a
colleague while you are on holiday.
You can use the following options to forward voice calls
and/or data calls:
Forward Always: all calls are forwarded.
Busy: calls are forwarded when you are already on
another call.
No Reply: calls are forwarded when you do not answer
the phone.
Unreachable: calls are forwarded when you are not in an
area covered by your service provider.
Cancel All: all call forwarding options are canceled.
To set your call forwarding options:
1. Select a call forwarding option by pressing the Up or
Down key and then press the Select soft key or
key
.
The following options are available:
● Forward always: all calls are forwarded.
● Busy: calls are forwarded when you are already on
another call.
● No reply: calls are forwarded when you do not
answer the phone.
Network Services
91
● Unreachable: calls are forwarded when you are not in
an area covered by your service provider or when
your phone is switched off.
● Cancel all: all call forwarding options are canceled.
2. Select the type of calls, voice or data, by pressing the
Up or Down key and then press the Select soft key or
key.
The current status displays. If the option has already been
set, the number to which the calls are forwarded displays.
To
Press the
activate call
forwarding
Activate soft key. Go to
step 4.
change the call
number
Change soft key. Go to
step 4.
deactivate call
forwarding
Remove soft key.
3. Enter the number to which the calls are to be forwarded
and press the OK soft key or key.
To enter an international code, press the
sign displays.
O
key until the
+
The phone sends your settings to the network and the
network’s acknowledgement displays.
You can deactivate all call forwarding settings by selecting
the Cancel All option.
Network Services
92
Call Barring
The call barring network service allows you to restrict your
calls.
You can use the following options to restrict voice and/or
data calls:
All Outgoing: calls cannot be made.
International: international calls cannot be made.
International Except to Home: when abroad, calls can
be made only to numbers within the current country and to
your home country, which is the country where your home
network provider is located.
All Incoming: calls cannot be received.
Incoming While Abroad: calls cannot be received when
you are using your phone outside of your home service
area.
Cancel All: all call barring settings are deactivated; calls
can be made and received normally.
To set your call barring options:
1. Select a call barring option by pressing the Up or Down
key and then press the Select soft key or key.
2. Select the type of calls, voice or data, by pressing the
Up or Down key and then press the Select soft key or
key.
3. Press the Activate soft key to confirm your settings.
4. Enter your call barring password supplied by your
service provider.
The phone sends your settings to the network and the
network’s acknowledgement displays.
Network Services
93
To deactivate specific call barring settings:
5. Select the call barring option to be deactivated.
6. Select the type of calls to which this option applies.
7. Press the Deactivate soft key.
8. Enter your call barring password supplied by your
service provider.
The phone sends your settings to the network and the
network’s acknowledgement displays
You can also deactivate all call barring settings by
selecting the Cancel All option.
Change Barring Password: you can set and change the
call barring password obtained from your service provider
using this option. You must enter the current password
before you can specify a new one.
Once you have entered a new password, you are asked to
confirm it by entering it again.
Call Waiting
This network service informs you when someone is trying
to reach you during another call.
You can specify individual call waiting options for voice
calls and/or data calls.
To set your call waiting options:
1. Select the type of calls, voice or data, to which the call
waiting option is to be applied by pressing the Up or
Down key and then press the Select soft key or
key
.
The screen informs you whether call waiting is activated or
deactivated.
Network Services
94
2. You can activate or deactivate the call waiting feature
using the Activate or Deactivate soft key respectively.
To return to the previous screen, press the Exit soft key.
You can also deactivate all call waiting settings by
selecting the Cancel All option.
Network Selection
The Network Selection feature enables you to
automatically or manually select the network used when
roaming outside of your home area.
Note: You can select a network other than your home network only if there is a
valid roaming agreement between them.
To indicate to automatically or manually select the network
when roaming:
1. When Network Selection displays, press the Select
soft key.
2. Press the Up or Down key until the appropriate option
highlights, then press the OK soft key or key.
If you select Automatic, you are connected to the first
available network when roaming.
If you select Manual, the phone scans for the available
networks. Go to Step 3.
3. Press the Up or Down key until the network you want
highlights and then press the OK soft key or key.
You are connected to that network.
Network Services
95
Caller ID
You can prevent your phone number from being displayed
on the phone of the person being called.
Note: Some networks do not allow you to change this setting.
The following options are available:
Default: the default setting provided by the network is
used.
Hide Number: your number does not display on the other
person’s phone.
Send Number: your number is sent each time you make a
call.
Closed User Group (CUG)
This network service allows incoming and outgoing calls
to be restricted to a selected user group. You can create
up to ten user groups.
For details on how to create and use a closed user group,
contact your service provider.
Example: A company lends SIM cards to its employees and
wants to restrict outgoing calls to members of the same
team.
Activating a Closed User Group
If you select the Closed User Group menu, you can enter
the CUG function. You can now access the following
options after pressing the Select soft key or key:
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears. Add a
new CUG index as advised by your service provider or
delete a selected group.
Network Services
96
To
Press the
scroll through the Up or Down key.
existing CUG
indexes
add a new CUG Options soft key, select the
index
Add option and enter the
index.
delete a CUG
index
Options soft key and select
the Delete option.
activate a CUG
index
Options soft key and select
the Activate option.
Outside Access: lets you enable or disable calls to
numbers other than those in the Closed User Group. This
feature depends on the nature of your CUG subscription.
Please check with your service provider.
Default Group: you may set a default CUG with your
service provider. If you have done so, you can enable the
Default Group option on your phone. When making a call,
you are given the option of using your default CUG,
instead of selecting one from the list.
Deactivate: deactivates the CUG function. This option
appears only when the default group is enabled or a CUG
index is selected.
Network Services
97
Network Services
98
Games
When you access the Games menu, the list of the default
games appears. Once you have downloaded games, they
are added to the list.
Note: Java services may not be available, depending upon your service
provider.
Downloading a new game
You can download more games from the web site preset
by your service provider using the Download option.
Launching a MIDlet
Note: The procedure explained below is for the default games. For downloaded
games, the procedure may be different.
1. Scroll to the MIDlet you want on the Games list and
press the Launch soft key or
key.
2. On the startup screen of the MIDlet, scroll to an option
using the Navigation keys.
The following options are available:
•
•
START GAME: starts a new game.
CONTINUE: allows you to continue the last game you
played.
•
•
•
HIGH SCORE: shows the high score table. This option
may not be available for some games.
HOW TO PLAY: shows how to play the game and the key
functions for the game.
OPTION: allows you to switch the game sound on or off.
Games
99
3. Press the key to confirm your selection.
While you are playing a game, to
Press the
adjust the sound volume
Volume keys.
key.
stop the game and return to
the startup screen
exit the game
key.
Using the game options
You can access the following options by pressing the
Options: soft key on the Games list.
Delete: allows you to delete the currently selected MIDlet.
When you select the default games from the list, this
option is not available.
Delete all: allows you to delete all of the MIDlets you
downloaded from the wireless web. When you select the
default games from the list, this option is not available.
Properties: shows you information about the currently
selected MIDlet, such as the file size, application version,
and its vendor.
Memory status: shows you the Total, Free, and Used
memory, and also number of games you downloaded.
Entering Text
If you need to enter text while using a MIDlet, you can use
the following input modes:
Games
100
Upper-case character mode (A): allows you to enter
upper-case English characters.
Lower-case character mode (a): allows you to enter
lower-case English characters.
Number mode (1): allows you to enter numbers.
Symbol mode: allows you to enter symbols. After
highlighting a symbol by pressing the Navigation keys,
press the key to insert it.
T9 mode (T9): allows you to enter English characters by
pressing one key per letter.
To change the text input mode, press the
key until the
appropriate indicator appears on the soft key area of the
display.
Games
101
Games
102
Download
104
Sound Settings
You can use the Sound Settings feature to customize
various settings, such as the:
● ring melody, volume and type.
● sounds made when you press a key, receive a
message, open/close the folder or switch your phone
on/off.
● alert tone made every minute during a call, when you
make an error or when your call is connected to the
system.
Note: When the phone is in Silent mode, you cannot change the sound
settings.
Ring Tone
This menu allows you to select a ring melody.
You can choose between many different melodies. Each
time you select a melody, it plays continuously until you
make a selection or exit the option. If you have
downloaded sounds from the Internet, you can use them
in this menu.
Ring Volume
This menu allows you to adjust the ring volume to one of
five levels.
Use the Up and Down keys or the Volume keys on the left
side of the phone to increase or decrease the volume.
Download
This option opens the WAP browser to a web site where
you can download additional ringtones.
Sound Settings
105
Alert Type
This menu allows you to specify how you are to be
informed of incoming calls.
The following options are available:
Light Only: the service light flashes the phone neither
rings nor vibrates.
Melody: the phone rings using the ring melody selected in
the Ring Tone menu (Menu 6.1).
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three times and
then starts ringing.
Keypad Tone
This menu allows you to select the tone that the phone
sounds when you press a key. The options are Off, Cool,
Piano, Tone and Beep.
To turn off the sound, select Off.
Message Tone
This menu allows you to select how the phone informs you
that a new message has been received.
SMS Tone
The following options are available for alerting you to new
SMS messages:
SMS Tone x: the phone uses one of several SMS tones.
Off: the phone does not use the SMS tone.
Light only: the service light flashes.
Vibration: the phone vibrates.
Single beep: the phone beeps once.
Sound Settings
106
SMS-CB Tone
The following options are available for alerting you to new
SMS-CB messages:
SMS-CB Tone x: the phone uses one of several SMS-CB
tones.
Off: the phone does not use the SMS-CB tone.
Light only: the service light flashes.
Vibration: the phone vibrates.
Single beep: the phone beeps once.
MMS Tone
The following options are available for alerting you to new
multimedia messages:
Off: the phone does not use the MMS tone.
Light only: the service light flashes.
Vibration: the phone vibrates.
Single beep: the phone beeps once.
MMS Tone x: the phone uses one of several MMS tones.
Folder Tone
This menu allows you to select the tone (Off, Future, and
Crystal) that the phone sounds when you open or close
the folder.
To turn the sound off, select Off.
Power On/Off
This menu allows you to select the melody that the phone
sounds when it is switched on and off.
To turn the sound off, select Off.
Sound Settings
107
Alerts on Call
This menu option allows you to turn off the following alerts
during a call:
● Alarm
● Text messages
● MMS
● SMS
● Low Battery
● WAP Push
The default setting is On. To turn off this setting, select the
OFF setting and press the Select soft key.
Extra Tones
You can customize additional tones used for the phone.
To turn a given tone
Press the
key. A check
on
off
Mark soft key or
mark displays in front of the
option.
Unmark soft key or
key. The
check mark no longer displays.
The following options are available:
Error Tone: sets whether or not the phone informs you
when you have make a mistake.
Minute Minder: sets whether or not the phone beeps
every minute during an outgoing call to keep you informed
of the length of your call.
Sound Settings
108
Sound Settings
110
Applications
The Applications menu enables you to:
♦set the alarm so that the phone rings at a specific time,
such as to remind you of an appointment.
♦view the calendar and organize your schedule.
♦set the current date and time.
♦use the phone as a calculator for basic mathematical
equations or currency exchange operations.
♦define a list of things to do.
♦create personal voice memo’s.
♦identify currency exchange rates
Alarm
This feature allows you to:
♦set the alarm to ring at a specific time.
♦set the phone to switch on automatically and ring the
alarm even if the phone is switched off.
The following options are available:
Once Alarm: the alarm rings only once and is then
deactivated.
Daily Alarm: the alarm rings every day at the same time.
Wake-up Call: the alarm rings to wake you up in the
morning.
To set the alarm:
1. Choose the type of alarm to be set and press the
Select soft key or
key.
2. Enter the time for the alarm to sound.
If you want to use the alarm options, press the Options soft
key. The following options are available:
Applications
111
•
•
Remove Alarm: deactivates the current alarm.
Alarm Tone: allows you to select an alarm melody.
3. Press the OK soft key.
4. Choose AM or PM using the Up and Down keys and
press the Select soft key or key.
Note: Your phone is preset to use 12-hour format. To change the
time format, see page 116.
5. If you select Wake-up Call in step 1, select the repeat
option, Monday to Friday or Monday to Saturday and
press the Select soft key or key.
To stop the alarm when it rings, open the phone and press
the Exit soft key, Volume keys, C key,
key, or
key.
Remove Alarm: deactivates all alarm settings.
Autopower: when this option is set to Enable, the alarm
rings at the specified time, even if the phone is switched
off.
♦If the option is set to Disable and the phone is switched
off at the specified time, the alarm does not ring.
Calendar
With the Calendar feature, you can:
♦consult the calendar.
♦write memos to keep track of your schedule.
♦set an alarm to act as a reminder, if necessary.
Consulting the Calendar
When you select the Calendar menu (Menu 7.2), the
calendar displays with today’s date highlighted. The
Applications
112
following options are available when you press the
Options soft key:
Search All: displays all memos set, starting with the
oldest, regardless of the day. To scroll through the memos,
press the Up or Down key.
Delete All: allows you to delete all of the memos. You are
asked to confirm your action.
Go to Date: allows you to jump to a specific date.
Exit: exits the Calendar feature and returns to Idle mode.
Writing a Memo
To write or edit a memo on a specific date:
1. Select a date on the calendar, using the Navigation
keys.
Note: To skip to the previous or next month, press the Volume keys
on the left side of the phone.
2. Press the key.
An empty memo screen displays to allow you to enter your
memo.
3. Enter your memo and then press the OK soft key or
key.
Note: For further details about how to enter characters, see page 47.
You are asked if you wish to set an alarm.
4. If you want the alarm to ring on the chosen day, press
the Yes soft key or key.
Otherwise, press the No soft key. The memo is saved and
the display returns to the calendar.
Applications
113
5. If you pressed the Yes soft key or key, set the time
for the alarm and press the OK soft key or key.
Note:
• Your phone is preset to a 12-hour format. To change the time
format, see page 116.
• When the alarm time you set goes off and the alarm rings. To view
details about the memo, press the View soft key. To stop the alarm,
press the Exit soft key,
C
key,
key, or
key.
You can also select the melody for the alarm by pressing the
Melody soft key.
6. Select either AM or PM and press the Select soft key
or key.
The color of the date on the calendar changes to green to
indicate that a memo exists for that date.
Viewing a memo
When you select a day on which more than one memo
exists, the latest memo for the day displays.
In that case, press the Up or Down key to scroll to the
previous or next memo.
You can access the following options by pressing the
Options soft key or key:
New: allows you to add a new memo.
Edit: allows you to change the memo text.
Alarm: allows you to set the alarm to ring at the specified
time to remind you of the memo. If you have already set an
alarm for that memo, you can change or delete the alarm.
Delete: deletes the memo.
Copy to: allows you to copy the memo to another date or
time.
Applications
114
Move to: allows you to change the time or date of the
memo.
Time & Date
This menu allows you to change the current time and date
displayed. You can also check the current time for 22
major cities around the world.
The following options are available:
Set Time: allows you to enter the current time. You can
choose the time format in the Time Format menu (Menu
7.3.4).
Note: Before setting the time, you must specify your time zone in the World
Time menu (Menu 7.3.3).
Set Date: allows you to enter the month, day and year.
World Time: allows you to find out what time it is another
part of world, using the Left and Right keys.
The screen shows the:
♦city name.
♦time difference between the selected city and your city
if you have set the local time (see below for further
details).
♦current date and time.
♦city selected as your time zone.
To select your time zone:
1. Select the city corresponding to your time zone by
pressing the Left or Right key one or more times. The
local date and time display.
2. Press the Set soft key.
Applications
115
Time Format: allows you to change the time format to 24
Hours or 12 Hours.
Auto Update: allows you to use the service providers
network time and date. You can choose from Off, On, and
Confirm First.
Calculator
With this feature, you can use the phone as a calculator.
The calculator provides the basic arithmetic functions;
addition, subtraction, multiplication and division.
1. Enter the first number using the numeric keys.
Note: To include a decimal point or a bracket, press the left soft key until the
symbol you want displays.
2. Press the right soft key until the symbol you want
displays: + (addition), - (subtraction), * (multiplication), /
(division).
3. Enter the second number.
4. To view the result, press the
key.
5. Repeat steps 1 to 4 as many times as required.
To Do List
This feature allows you to:
♦enter a list of tasks to be done.
♦assign a priority and a deadline to each task.
♦sort the tasks by priority and status mark.
Creating the To Do List
1. Press the New soft key or
key.
Applications
116
2. Enter the first task.
3. Press the OK soft key or key.
4. Select a priority level of high, normal, or low priority
using the Up or Down key and press the Select soft key
or key.
5. Enter your deadline and press the OK soft key or
key.
If you do not want to set a deadline, press the Skip soft key.
Editing the To Do List
When you select the To Do List menu, the current
contents display with a status mark, if the task has been
done, and priority;
Low.
for High,
for Normal and
for
To view the details for a task, select it from the list. You can
scroll to other task by pressing the Up or Down key.
To change the status of a task, press the key to mark
the task as completed as of the current time and date.
By pressing the Options soft key or key on the list or
the task view, you can access the following options:
New: allows you to create a new task.
Mark: allows you to change the status of the current task
to either Done or Undo.
Edit: allows you to change the text, priority, and/or
deadline for the current task.
Sort: allows you to sort the existing tasks by priority of
status. Select the sort criteria, High, Low, Done, or Undo.
Applications
117
Copy: makes a copy of the current task.
Copy to calendar: allows you to copy the current task as
a calendar memo. You can change the text and deadline
for the task, and set the alarm.
Delete: deletes the current task.
Delete all: allows you to delete all of the tasks.
Exit: exits the To do list.
Action
Procedure
View the details
1. Highlight the task.
for a specific task
2. Press the Options soft
key.
3. Scroll through the tasks
using the Up and Down
keys.
Applications
118
Action
Procedure (Continued)
Change the
status of a
specific task
1. Highlight the task.
2. Press the
key to
mark the task as
completed as of the
current date and time.
or
1. Highlight the task.
2. Press the Options soft
key.
3. Select the Mark option.
4. Select the appropriate
status (Done or Undo).
Create a new
task
1. Press the Options soft
key.
2. Select the New option.
3. Enter text, priority and
deadline for the task.
Applications
119
Action
Procedure (Continued)
Edit an existing
task
1. Highlight the task.
2. Press the Options soft
key.
3. Select the Edit option.
4. Change the text, priority
and/or deadline for the
task.
Sort the existing
tasks by priority
or status
1. Press the Options soft
key.
2. Select the Sort option.
3. Select the sort criterion
(High, Low, Done or
Undo).
Copy a task
1. Highlight the task.
2. Press the Options soft
key.
3. Select the Copy option.
4. Change the text, priority
and/or deadline for the
task.
Applications
120
Action
Procedure (Continued)
Copy a task to
the calendar
1. Highlight the task.
2. Press the Options soft
key.
3. Select the Copy to
Calendar option.
4. Change the text and/or
deadline for the task and
set the alarm.
Delete a task
1. Highlight the task.
2. Press the Options soft
key.
3. Select the Delete option.
Delete all tasks
1. Press the Options soft
key.
2. Select the Delete All
option.
3. Confirm the deletion by
pressing the OK soft
key.
Exit the To Do
list
1. Press the Options soft
key.
2. Select the Exit option.
Applications
121
Voice Memo
The voice memo menu allows you to record voice memo’s
for easy retrieval at a later time.
The following options are available:
♦Record
♦Memo List
♦Delete All
♦Memory Status
Record
This menu allows you to record a new memo. When you
select this option, the display shows a 30-second timer.
1. To start recording, press the Record soft key or
key
.
2. Record a memo by speaking into the microphone.
3. When you press the Stop soft key or key, or if the
recording time expires, the following options display:
•
•
Replay: plays back your memo.
Re record: discards the memo and enables you to record
-
another one.
•
•
Save: allows you to save the memo.
Quit: cancels your recording and exits the Record menu.
4. To save the memo, choose Save and press the Select
soft key or key.
5. Press the C key to clear the default name, if necessary,
and enter a name for the memo.
For further details about how to enter characters, see
Applications
122
6. Press the OK soft key or key.
The memo is saved and then the display shows the memo
information.
7. Press the Options soft key or key to access the
following memo options:
•
Send: allows you to send the memo to other people by
using the MMS feature. Follow the procedure on page 89.
•
•
Rename: allows you to change the memo’s name.
Delete: allows you to delete the memo.
8. To exit, press the
soft key or
key.
Memo list
This menu shows a list or saved voice memos. Scroll to a
memo and press the Options soft key or key. The
following options are available:
Play: plays the memo.
Send: allows you to send the memo to other people by
about sending a message.
Rename: allows you to change the memo’s name.
Information: displays information about the memo, such
as the name, the date when the memo was made,
recording durations, and memory size.
Delete: allows you to delete the memo.
Delete all
In this menu, you can delete all of your voice memos.
Applications
123
When the confirmation message appears, press the Yes
soft key or key. To cancel the deletion, press the No soft
key.
Memory status
You can check the amount of memory being used and the
memory remaining for voice memos.
The display shows the total, free, and used memory
including the number of memos you recorded and the total
umber of the memos you can record.
Currency Exchange
Using this menu, you can figure currency conversions.
1. Enter the current exchange rate of your source
currency and press the OK soft key.
You can insert a decimal point by pressing the
key.
2. Enter the amount to convert and press the OK soft key.
The amount you entered and its equivalent value display.
3. Press the Exit soft key to exit the currency converter.
Applications
124
My Browser
The My Browser menu option is used to access the
internet and the following available options listed.
My Browser
Your phone is equipped with a WAP (Wireless Application
Protocol) browser to allow you to access and navigate the
Wireless Web using your phone.
Home
Selecting this menu connects the phone to the network
and loads the homepage of the Wireless Web service
provider. You can also press the key in Idle mode.
The content of the WAP Browser startup homepage
depends on your Wireless Web service provider. To scroll
through the screen, use the Up and Down keys.
Note: To access the startup homepage from any other screen in the WAP
Browser, use the Home option.
Exiting the WAP Browser
To exit the browser at any time, simply press the
press and hold the key.
key or
My Browser
125
Navigating the WAP Browser
To
Press the
scroll through and Up or Down key and then
select browser
items
press the OK soft key or
key to confirm the selection.
select a numbered corresponding numeric key.
item
return to the
previous page
Back soft key or the
key.
return to the
startup homepage
key and select the Home
menu. For further details
about this option, see
Entering Text in the WAP Browser
When you are prompted to enter text, the current text input
mode is indicated on the screen.
The following modes are available:
Upper-case character (A): allows you to enter upper-
case English characters.
Lower-case character (a): allows you to enter lower-case
English characters.
Note: You can enter symbols in upper or lower-case character mode by
pressing the
key.
Number (1): allows you to enter numbers.
My Browser
126
To change
the text input
mode
Press the key one or more
times.
To enter a
space
Press the
key.
To edit text
1. Set the cursor to the right of
the character(s) to be
corrected.
2. Press the
required.
key as
3. Enter the correct
character(s).
Selecting and Using Menu Options
Various menus are available when you are using the WAP
Browser to navigate the Wireless Web.
To access a menu option:
1. Press and hold down the
A menu displays.
key.
2. Highlight a menu by pressing the Up and Down keys.
3. Select the option by pressing the Select soft key or
key.
4. If necessary, select a secondary option using the Up
and Down keys, and press the Select soft key or key
to confirm.
My Browser
127
Note: The menus may vary, depending on your version of the WAP Browser.
The following options are available:
Reload: reloads the current page.
Home: takes you back at any time to the homepage of the
Wireless Web service provider.
Goto URL: allows you to manually enter the URL address
of a Web page. After entering an address, press the OK
soft key or key to go there directly.
Show URL: displays the URL address of the site to which
you are currently connected. It also enables you to declare
the current site as the startup homepage.
To
Press the
declare the current
page as your
startup homepage
Option soft key or
key,
select the Save to Home
option and press the
Select soft key.
set a bookmark for
the current page
Option soft key or
select the Save to
key,
Bookmark option and
press the Select soft key.
cancel your setting Back soft key.
Edit Home: allows you to change the startup homepage
manually. Enter the required URL and press the OK soft
key or key. For more information about entering text,
My Browser
128
Favorites
This menu allows you to store the URL addresses of your
favorite web sites. You can access this menu directly by
pressing and holding down the
WAP Browser.
key while using the
To store a URL address:
1. Select an empty location and press the Options soft
key or key
.
2. Enter the address and press the Enter soft key or
key.
Note: For further details about how to enter characters, see “Entering Text” on
page 47.
3. Enter a name for the favorite item and press the Enter
soft key.
After saving favorite items, you can use the following
options by pressing the Options soft key or key:
Goto URL: takes you to the site.
Edit: allows you to edit the address.
Delete: deletes the address.
http://
This menu allows you to manually enter the URL address
of the web site that you wish to access. You can access
this menu directly by pressing and holding the
the WAP browser.
key in
For further details about entering characters, see “Entering
My Browser
129
Settings
This option allows you to set up five proxy servers for the
WAP browser. Contact your service provider for details.
For each server, the following options are available:
Profile Name: enter a name that you wish to assign to the
HTTP proxy server.
Homepage URL: set the address of your startup
homepage. When the default homepage displays, you can
delete it using the
key and enter your own choice.
Security: set the data transmission mode. Choose
Secure to protect your data against unauthorized access;
otherwise, choose Non-Secure.
Bearer: select the bearer to be used for each type of
network address accessed: GPRS or Data. The remaining
options depend on the Bearer setting.
When the bearer is set to GPRS:
IP address: enter the WAP gateway address required to
connect to the Internet.
User Name: enter the User ID required to connect to the
GPRS network.
Password: enter the password required to connect to the
GPRS network.
APN: enter the access point name used for the address of
the GPRS network gateway.
When the bearer is set to Data
Login Name: enter the PPP server login ID.
Password: enter the PPP server password.
Dial-up Number: enter the PPP server phone number.
Data Call Type: select a data call type: Analog or ISDN.
My Browser
130
IP Address: enter the WAP gateway address required to
connect to the Internet.
Note: The WAP Browser settings may vary, depending on the service provider.
Contact your service provider for further information.
Clear Cache
You can clear the information stored in the cache, which is
the phone’s temporary memory which stores the most
recently accessed Web pages.
Press the Yes soft key or key to confirm the deletion.
Otherwise, press the No soft key.
Audio
In this menu, you can view the list of sounds downloaded
from the web server or received in multimedia messages.
You can set the downloaded sounds as the current ring
tone or send them to other phones.
Scroll to the sound you want to listen to and press the Play
soft key or key.
By pressing the Options soft key or key, you can
access the following options:
Rename: allows you to change the name of the sound.
Delete: allows you to delete the sound.
Set as ring tone: sets the sound as your ring tone.
Using the Download option on the Audio list, you can
access the web site preset by your service provider and
download new sounds.
Graphics
In this menu, you can view the list of images downloaded
from the web server or received in messages. You can set
My Browser
131
the downloaded image as the current background image
or send them to other phones.
Scroll to the image you want to view and press the View
soft key or key.
Press the Options soft key or key to access the
following options:
Rename: allows you to change the name of the image.
Delete: allows you to delete the image.
Set as wallpaper: sets the image as your wallpaper for
the idle screen.
Using the Download option on the Graphics list, you can
access the web site preset by your service provider and
download new images.
Delete All
To delete previously downloaded Ringtones and Graphics,
select from the following options:
♦All
♦Audio
♦Graphics.
This menu allows you to delete all of the downloaded
items in the Audio and Graphics folders separately. You
can delete all of the items at one time.
To
Press the
select a folder to clear
Up or Down key. To delete all
of your items, select All.
place or remove a check
mark
key.
delete the marked items
Delete soft key.
My Browser
132
When a confirmation message displays, press the Yes soft
key or key to confirm.
Memory Status
You can check the amount of the memory being used and
the memory remaining for the Audio or Graphics menu.
The display shows the total, used, and, free space,
including each space used for sounds and images.
My Browser
133
My Browser
134
Phone Settings
Many different features of your phone can be customized
to suit your preferences. All of these features are
accessed in the Phone Settings menu.
Display Settings
You can change the background image and the display
style for Menu mode according to your preference.
Wallpaper
This option allows you to change the background image to
be displayed in Idle mode.
To change the background image:
1. Use the Up or Down key to select the image you want,
then press the Select soft key or
key
.
You have various preset images available. You can also
select the blank background or any downloaded images.
2. When the image displays, press the Select soft key or
key.
To choose to display text on the screen, select the Text
Display option. You can specify whether or not the phone
displays the time and date on the idle screen.
3. To choose the color of the text select the Text Color
option and select the color of the text to be displayed on
the idle screen.
Phone Settings
135
Menu Style
This menu allows you to select the menu display style. You
can choose either Grid Style, Bar Style or Page Style.
Download
This menu allows you to access the web site preset by
your service provider to download images.
Once you have downloaded images, they are saved in the
Graphics folder (Menu 8.3).
Brightness
This option allows you to adjust the brightness setting for
your phone’s display. Use the Up or Down navigation keys
to perform this function.
Back Light
You can select the length of time the phone uses the
backlight. Select the length of time for which the backlight
is on. The backlight turns on when you press a key or
receive a call or message and remains on for the specified
length of time.
Service Light
This menu allows you to select whether or not the service
light is used or in which color it flashes.
Select one from the three color combinations. The service
light flashes in the appropriate color.
If you do not want to use the service light, select Off.
Phone Settings
136
Graphic Logo
This menu allows you to display your service provider’s
logo instead of its name.
Off: the service provider’s name displays in Idle mode.
On: the service provider’s logo displays in Idle mode; if no
logo has been stored, the service provider’s name
displays.
Greeting Message
This menu allows you to set a greeting to be displayed
briefly when the phone is switched on.
To
Press the
clear the
existing
C key and hold it down until
the message is cleared.
message
enter a new
message
appropriate alphanumeric
keys.
change the text Right soft key.
input mode
Own Number
This function is a memory aid, which you can use to check
your own phone number if necessary.
You can:
♦assign a name to each of the own phone numbers
registered on your SIM card.
Phone Settings
137
♦edit the names and numbers.
Any changes made here do not in any affect the actual
subscriber numbers on your SIM card.
Language
You can select a display language. When the language
option is set to Automatic, the language is automatically
selected according to the language of the SIM card used.
Security
The Security feature enables you to restrict the use of your
phone to the people and the types of calls of your choice
Various codes and passwords are used to protect the
features of your phone. They are described in the following
sections.
PIN Check
When the PIN Check feature is enabled, you must enter
your PIN each time you switch the phone on.
Consequently, any person who does not have your PIN
cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you must enter your PIN.
The following options are available:
Disable: the phone connects directly to the network when
you switch it on.
Enable: you must enter the PIN each time the phone is
switched on.
Phone Settings
138
Change PIN
This feature allows you to change your current PIN,
provided that the PIN Check feature is enabled. You must
enter the current PIN before you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone Lock
When the Phone Lock feature is enabled, the phone is
locked and you must enter the 8-digit phone password
each time the phone is switched on.
The password is preset to “00000000” at the factory. To
change the phone password, see the Change Password
menu.
Once the correct password has been entered, you can use
the phone until you switch it off.
The following options are available:
Disable: you are not asked to enter the phone password
when you switch the phone on.
Enable: you are required to enter the phone password
when you switch the phone on.
Change Password
The Change Password feature allows you to change your
current phone password to a new one. You must enter the
current password before you can specify a new one.
The password is preset to “00000000” at the factory. Once
you have entered a new password, you are asked to
confirm it by entering it again.
Phone Settings
139
Privacy
Using this menu, you can lock your media contents, such
as multimedia messages, memo list, graphics and audio.
Once you have locked the contents, you must enter the
phone’s password to access the associated menus.
To
Press the
select an item to lock
Up or Down key. To lock all
of the contents, selects All
place or remove a check
mark
key
lock the marked items
OK soft key.
When the phone asks for the password, enter the
password and press the OK soft key or key.
Note: The password is preset to “00000000” at the factory. To change this
password, see page 139.
SIM Lock
When the SIM Lock feature is enabled, your phone only
works with the current SIM. You must enter the SIM lock
code to unlock the SIM so you can use a different SIM
card.
Once you have entered the lock code, you are asked to
confirm your entry.
Phone Settings
140
FDN Mode
FDN (Fixed Dial Number) mode, if supported by your SIM
card, allows you to restrict your outgoing calls to a limited
set of phone numbers.
The following options are available:
Disable: you can phone any number.
Enable: you can only call phone numbers stored in
Phonebook. You must enter your PIN2.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display.
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the current
PIN2 before you can specify a new one. Once you have
entered a new PIN2, you are asked to confirm it by
entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display.
Extra Settings
You can turn the automatic redialing or answering features
on or off.
To turn a feature
Press the
on
On soft key or
key.
A check mark displays in
front of the option.
Phone Settings
141
To turn a feature
Press the
off
Off soft key or
key.
The check mark no longer
displays.
The following options are available:
Auto Redial: when this option is checked, the phone
makes up to ten attempts to redial a phone number after
an unsuccessful call.
Note: The interval between two call attempts varies.
Open to Answer: when this option is checked, you can
simply open the folder to answer a call. When it is
unchecked, you must open the folder and press a key to
answer a call, depending on the setting of the Anykey
Answer option. See below.
Anykey Answer: when this option is checked, you can
answer an incoming call by pressing any key, except the
key and the Reject soft key. To reject the call, press the
key or the Reject soft key.
When this option is unchecked, you can only press the
key or Accept soft key.
Short Cut
The Navigation keys can be used as shortcut keys. In Idle
mode, they allow you to access specific menus directly.
To assign a shortcut to a key:
1. Select the key to be used as a shortcut key by pressing
the Up or Down key, and press the Select soft key.
Phone Settings
142
• Key Up
• Key Down
• Key Right
• Key Left
2. Select the menu to be assigned to the key by pressing
the Up or Down key.
Note: To deactivate a shortcut key, select the None option.
3. Press the Select soft key or key to save the
selection.
Reset Settings
You can easily reset your phone to its default settings. To
reset your phone:
1. Select the Reset Settings menu.
2. Enter the 8-digit password and press the OK soft key.
Note: The password is preset to “00000000.” To change this password, see
Phone Settings
143
Phone Settings
144
Solving Problems
If you are experiencing problems with your phone, perform
the following simple checks before contacting a service
professional. This may save you the time and expense of
an unnecessary service call.
When you switch your phone on, the following messages
may appear
Insert SIM Card
♦Check that the SIM card is correctly installed.
Phone Locked Enter Password
♦The automatic locking function has been enabled. You
must enter the phone’s password before you can use
the phone.
Enter PIN
♦You are using your phone for the first time. You must
enter the Personal Identification Number supplied
with the SIM card.
♦The PIN Check feature is enabled. Every time the
phone is switched on, the PIN has to be entered. To
disable this feature, use the PIN Check menu.
Enter PUK
♦The PIN code was entered incorrectly three times in
succession and the phone is now blocked. Enter the
PUK supplied by your service provider.
Solving Problems
145
“ No service,” “ Network failure” or “ Not done” displays
♦The network connection was lost. You may be in a
weak signal area (in a tunnel or surrounded by
buildings). Move and try again.
♦You are trying to access an option for which you have
not taken out a subscription with your service
provider. Contact the service provider for further
details.
You have entered a number but it was not dialed
♦Have you pressed the
key?
♦Are you accessing the right cellular network?
♦You may have set an outgoing call barring option.
Your correspondent cannot reach you
♦Is your phone switched on (the
key pressed for
more than one second)?
♦Are you accessing the right cellular network?
♦You may have set an incoming call barring option.
Your correspondent cannot hear you speaking
♦Have you switched off the microphone?
♦Are you holding the phone close enough to your
mouth? The microphone is located at the bottom of
the phone.
The phone starts beeping and “ **Warning** Low Battery”
flashes on the display
♦The battery is insufficiently charged. Recharge the
battery.
Solving Problems
146
The audio quality of the call is poor
♦Check the signal strength indicator on the display
(
); the number of bars indicates the signal strength
from strong (
) to weak ( ).
♦Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialed when you recall a Phonebook entry
♦Check that the number has been stored correctly, by
using the Phonebook Search feature.
♦Re-store the number, if necessary.
If the above guidelines do not help you to solve
the problem, take a note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung after-
sales service.
Solving Problems
147
Solving Problems
148
Access Codes
There are several access codes that are used by your
phone and its SIM card. These codes help you protect the
phone against unauthorized use.
When requested for any of the codes explained below,
enter the appropriate code (displayed as asterisks) and
press the OK soft key or
key. If you make a mistake,
press the key until the incorrect digit is cleared and
then continue entering the correct code.
The access codes, except for the PUK and PUK2 codes
on page 138 for further details.
Important! Avoid using access codes resembling
emergency numbers, such as 911, to prevent accidental
dialing of an emergency number.
Phone Password
The Phone Lock feature uses the phone password to
protect your phone against unauthorized use. The phone
password is supplied with the phone and is preset to
“00000000” at the factory.
To
See
activate/deactivate the
Phone Lock feature
change the phone
password
Access Codes
149
PIN
The Personal Identification Number or PIN (4 to 8 digits)
protects your SIM card against unauthorized use. It is
usually supplied with the SIM card.
If you enter an incorrect PIN three times in succession, the
code is disabled and cannot be used until you re-enable it
by entering the PUK. See below.
To
See
activate/deactivate the
PIN Check feature
“PIN Check” on
page 154
change the PIN
“Change PIN” on
page 154.
PUK
The 8-digit PUK (PIN Unblocking Key) is required to
change a disabled PIN. The PUK may be supplied with the
SIM card. If not, contact your service provider.
To re-enable your PIN:
1. Enter the PUK and press the OK soft key or
key
.
2. Enter a PIN of your choice and press the OK soft key or
key.
3. When the Confirm New PIN message displays, enter
the same code again and press the OK soft key or
key.
When you enter an incorrect PUK ten times in succession,
the SIM card becomes invalid. Contact your service
provider for a new card.
Access Codes
150
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM cards, is
required to access specific functions, such as setting the
maximum cost of a call. These functions are available if
supported by your SIM card.
If you enter an incorrect PIN2 three times in succession,
the code is disabled and you cannot access the functions
until you re-enable it by entering the PUK2.
PUK2
The 8-digit PUK2 (PIN Unblocking Key 2), supplied with
some SIM cards, is required to change a disabled PIN2. If
you lose the code, contact your service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key or key.
2. Enter a new PIN2 of your choice and press the OK soft
key or key.
3. When the Confirm PIN2 message displays, enter the
same code again and press the OK soft key or key.
When you enter an incorrect PUK2 ten times in
succession, you are not able to access the functions
requiring the PIN2. Contact your service provider for a
new card.
Access Codes
151
Access Codes
152
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits
for radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP)
and the Institute ofElectricaland Electronics Engineers (IEEE).
In both cases, the recommendations were developed by
scientific and engineering experts drawn from industry,
government, and academia after extensive reviews of the
scientific literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
absorption of RF energy by the human body expressed in units
of watts per kilogram (W/ kg). The FCC requires wireless
phones to comply with a safety limit of 1.6 watts per kilogram
(1.6 W/ kg). The FCC exposure limit incorporates a substantial
margin of safety to give additional protection to the public and
to account for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although
Health and Safety Information
153
the SAR is determined at the highest certified power level, the
actualSARlevelofthephonewhile operating can be wellbelow
the maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to
a wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC. Body-worn
operations are restricted to Samsung-supplied, approved, or
non-Samsung designated accessories that have no metal and
must provide at least 1.3 cm separation between the device,
including its antenna (whether extended or retracted) and the
user's body. Non-compliance with the above restrictions may
result in violation of FCC RF exposure guidelines.
The FCC has granted an Equipment Authorization for this
mobile phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. The
maximum SAR values for this model phone as reported to the
FCC are:
• Head: 0.733 W/Kg.
• Body-worn: 0.236 W/Kg.
SARinformation on this and other modelphonescan beviewed
on-line at www.fcc.gov/ oet/ fccid. To find information that
pertains to a particular model phone, this site uses the phone
FCCID number which isusually printed somewhereon thecase
Health and Safety Information
154
of the phone. Sometimes it may be necessary to remove the
battery pack to find the number. Once you have the FCC ID
number for a particular phone, follow the instructions on the
website and it should provide values for typical or maximum
SAR for a particular phone. Additional product specific SAR
information can also be obtained at www.fcc.gov/ cgb/ sar.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published
a series of Questions and Answers for consumers relating to
radio frequency (RF)exposure from wireless phones. The FDA
publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications
Commission safety guidelines that were developed with the
advice of FDA and other federal health and safety agencies.
When thephoneislocated at greater distances from theuser,the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones,"which have a base unit
connected to the telephone wiring in a house, typically operate
at far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
Health and Safety Information
155
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problemsareassociated with using wirelessphones. Thereisno
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels ofradio frequency energy (RF)
in the microwave range while being used. They also emit very
low levels of RF when in the stand-by mode. Whereas high
levels of RF can produce health effects (by heating tissue),
exposure to low level RF that does not produce heating effects
causes no known adverse health effects. Many studies of low
level RF exposures have not found any biological effects. Some
studies have suggested that some biological effects may occur,
but such findings have not been confirmed by additional
research. In some cases,other researchers have had difficulty in
reproducing those studies, or in determining the reasons for
inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before
they can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF)at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone industry
to take a number of steps, including the following:
Health and Safety Information
156
• "Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
• "Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
• "Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use on
human health.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
• "National Institute for Occupational Safety and Health
• "Environmental Protection Agency
• "Federal Communications Commission
• "Occupational Safety and Health Administration
• "National Telecommunications and Information Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA sharesregulatory responsibilitiesfor wirelessphoneswith
the Federal Communications Commission (FCC). All phones
that are sold in the United States must comply with FCC safety
guidelines that limit RFexposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone
networks rely upon. While thesebase stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
Health and Safety Information
157
thousands of times lower than those they can get from wireless
phones. Base stations are thus not the primary subject of the
safety questions discussed in this document.
What are the results of the research done already?
Theresearch donethusfar hasproduced conflicting results,and
many studies have suffered from flaws in their research
methods. Animalexperiments investigating the effects ofradio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many
of the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don't know with certainty what the results of
such studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland, leukemia, or
other cancers. None of the studies demonstrated the existence
of any harmful health effects from wireless phones RF
exposures. However, none of the studies can answer questions
about long-term exposures, since the average period of phone
use in these studies was around three years.
Health and Safety Information
158
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological
studiesofpeopleactually using wirelessphoneswould provide
some of the data that are needed. Lifetime animal exposure
studies could be completed in a few years. However, very large
numbers of animals would be needed to provide reliable proof
of a cancer promoting effect if one exists. Epidemiological
studies can provide data that is directly applicable to human
populations,but ten or more years' follow-up may be needed to
provide answers about some health effects,such as cancer. This
is because the interval between the time ofexposure to a cancer-
causing agent and the time tumors develop -if they do - may be
many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA isworking with theU.S.NationalToxicology Program and
with groups of investigators around the world to ensure that
high priority animal studies are conducted to address
important questions about the effects of exposure to radio
frequency energy (RF).
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF)
Project since its inception in 1996. An influential result of this
work hasbeen thedevelopment ofa detailed agenda ofresearch
needs that has driven the establishment of new research
programs around the world. The Project has also helped
Health and Safety Information
159
develop a series of public information documents on EMF
issues.
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include
both laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
Ifthere is a risk from these products -and at this point we do not
know that there is - it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
• "If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected to a remote
antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
Health and Safety Information
160
described above to reduce your RF exposure from wireless
phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. Ifyou want
to take steps to lower exposure to radio frequency energy (RF),
the measures described above would apply to children and
teenagers using wireless phones. Reducing the time ofwireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless
phones at all. For example, the government in the United
Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain tumors
or other ill effects. Their recommendation to limit wireless
phone use by children was strictly precautionary; it was not
based on scientific evidence that any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that hands-
free kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which
is the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
Health and Safety Information
161
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should resultin compliancewith thesafety
limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from
RF absorption use special phone cases, while others involve
nothing more than a metallic accessory attached to the phone.
Studies have shown that these products generally do not work
as advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone
may be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices
thatclaimed toprotectwirelessphoneusersfrom radiation with
making false and unsubstantiated claims. According to FTC,
these defendants lacked a reasonable basis to substantiate their
claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillatorsfrom wirelesstelephones. Thistestmethod isnow
part of a standard sponsored by the Association for the
Health and Safety Information
162
Advancement of Medical instrumentation (AAMI). The final
draft, a joint effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This standard
will allow manufacturers to ensure that cardiac pacemakers
and defibrillators are safe from wireless phone EMI. FDA has
tested wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and Electronic
Engineers (IEEE). This standard specifies test methods and
performance requirements for hearing aids and wireless
phones so that no interference occurs when a person uses a
compatible phone and a compatible hearing aid at the same
time. This standard was approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmful interference be found to occur, FDA will conduct
testing to assess the interference and work to resolve the
problem.
Additional information on the safety of RF exposures from
various sources can be obtained from the following
organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.slc.gov/SLTC/radiofrequencyradiation/index.html
• National institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/emfpg.html
• World health Organization (WHO):
http://www.who.int/peh-emf/
Health and Safety Information
163
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.nrpb.org.uk
• Updated 4/3/2002: US food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When
using your wireless phone behind the wheel of a car, practice
good common sense and remember the following tips:
1. Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you to
place your call without taking your attention off the road.
2. When available, use a hands-free device. If possible, add an
additional layer of convenience and safety to your wireless
phone with one of the many hands free accessories available
today.
3. Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes from
the road. If you get an incoming call at an inconvenient time, let
your voice mail answer it for you.
4. Let the person you are speaking with know you are driving; if
necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice and even heavy
traffic can be hazardous.
Health and Safety Information
164
5. Do not take notes or look up phone numbers while driving.
Jotting down a "to do" list or flipping through your address book
takes attention away from your primary responsibility, driving
safely.
6. Dial sensibly and assess the traffic; if possible, place calls when
you are not moving or before pulling into traffic. Try to plan calls
when your car will be stationary. If you need to make a call
while moving, dial only a few numbers, check the road and your
mirrors, then continue.
7. Do not engage in stressful or emotional conversations that may
be distracting. Make people you are talking with aware you are
driving and suspend conversations that have the potential to
divert your attention from the road.
8. Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident or
medical emergencies. Remember, it is a free call on your
wireless phone!
9. Use your wireless phone to help others in emergencies. If you
see an auto accident, crime in progress or other serious
emergency where lives are in danger, call 9-1-1 or other local
emergency number, as you would want others to do for you.
10. Call roadside assistance or a special non-emergency wireless
assistance number when necessary. If you see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a
minor traffic accident where no one appears injured, or a
vehicle you know to be stolen, call roadside assistance or other
special non-emergency number.
"The wireless industry reminds you to use your phone
safely when driving."
Health and Safety Information
165
For more information, please call 1-888-901-SAFE, or visit our
web-site www.wow-com.com
Provided by the Cellular Telecommunications & Internet
Association
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to
use it, or when it may cause interference or danger. When
connecting the phone or any accessory to another device, read
its user's guide for detailed safety instructions. Do not connect
incompatible products.
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation ofthe equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over your
shoulder).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a wireless
phone and a pacemaker to avoid potentialinterference with the
pacemaker.
Health and Safety Information
166
These recommendations are consistent with the independent
research and recommendations of Wireless Technology
Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm (6 inches) from their
pacemaker when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize potential
interference.
If you have any reason to suspect that interference is taking
place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing
aids. In the event of such interference, you may wish to consult
your hearing aid manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able
to assist you in obtaining this information. Switch your phone
offin health care facilities when any regulations posted in these
areas instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to external RF
energy.
Health and Safety Information
167
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult themanufacturer ofany equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices
require you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to
observe restrictions on theuseofradio equipment in fueldepots
(fuel storage and distribution areas), chemical plants or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
Health and Safety Information
168
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee connection in
all conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signalstrength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/ or phone
features are in use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number). Emergency
numbers vary by location.
3. Press the
key.
Ifcertain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
When making an emergency call, remember to give all the
necessary information asaccuratelyaspossible.Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play
Health and Safety Information
169
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection
Standard (NFPA-58). For a copy of this standard, contact the
National Fire Protection Association, One Batterymarch Park,
Quincy, MA 02269, Attn: Publication Sales Division.
Cautions
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers.The use of
any unauthorized accessories may be dangerous and void the
phone warranty if said accessories cause damage or a defect to
the phone.
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting,
bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
Health and Safety Information
170
• Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
• Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
• Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to
the signal strength icon. The more bars displayed, the stronger
the signal.
If you're inside a building, being near a window may give you
better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically activated. If
your phoneisactive,itperiodically rechecksserviceavailability
or you can check it yourself by pressing any key.
Health and Safety Information
171
Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your phone
returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When
it's turned on, it receives and transmits radio frequency (RF)
signals. When you use your phone, the system handling your
call controls the power level. This power can range from 0.006
watts to 0.2 watts in digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel
should service your phone and accessories. Faulty service may
void the warranty.
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
• Hold the phone with the antenna raised, fully-extended and over your
shoulder.
• Try not to hold, bend or twist the phone's antenna.
• Don't use the phone if the antenna is damaged.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
Health and Safety Information
172
Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/ or usage charges. Not all
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional
cost. Other conditions and restrictions may apply. See your
service provider for additional information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends
on factors such as network configuration, signal strength,
operating temperature, features selected, frequency of calls,
and voice, data, and other application usage patterns.
Battery Precautions
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself over time.
• Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
Health and Safety Information
173
connected to a charger for more than a week, since overcharging may
shorten its life.
• Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental short- circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
• Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will
help you fulfillany warranty obligations and allow you to enjoy
this product for many years
• Keep the phone and all its parts and accessories out of the reach of
small children's.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
Health and Safety Information
174
• Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
• Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
• Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
• Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
• Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
• Use only the supplied or an approved replacement antenna.
Unauthorized antennas or modified accessories may damage the
phone and violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P. ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that
SAMSUNG's Phones and accessories ("Products")are free from
defects in material and workmanship under normal use and
Health and Safety Information
175
service for the period commencing upon the date of purchase
and continuing for the following specified period of time after
that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
WhatisNotCovered?This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty
does not cover: (a) defects or damage resulting from accident,
misuse, abuse, neglect, unusual physical, electrical or
electromechanicalstress,or modification ofany partofProduct,
including antenna, or cosmeticdamage;(b)equipment that has
the serial number removed or made illegible; (c) any plastic
surfaces or other externally exposed parts that are scratched or
damaged due to normal use; (d) malfunctions resulting from
the use of Product in conjunction with accessories, products, or
ancillary/ peripheral equipment not furnished or approved by
SAMSUNG; (e) defects or damage from improper testing,
operation, maintenance, installation, or adjustment; (f)
installation,maintenance,and serviceofProduct,or (g)Product
used or purchased outside the United States or Canada. This
Limited Warranty covers batteries only if battery capacity falls
below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery
has been charged by a battery charger not specified or approved
by SAMSUNG for charging the battery, (ii) any of the seals on
Health and Safety Information
176
thebattery arebroken or show evidenceoftampering,or (iii)the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
WhatareSAMSUNG'sObligations?During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date ofpurchase,the serial number ofProduct and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-987-
4357. Upon receipt, SAMSUNG will promptly repair or replace
the defective Product. SAMSUNG may, at SAMSUNG's sole
option, use rebuilt, reconditioned, or new parts or components
when repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/ replaced leather
cases, pouches and holsters will be warranted for a period of
ninety (90) days. All other repaired/ replaced Product will be
warranted for a period equal to the remainder of the original
Limited Warranty on the original Product or for 90 days,
whichever is longer. All replaced parts, components, boards
and equipment shall become the property of SAMSUNG. If
SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
Health and Safety Information
177
OTHERWISE, OF ANY KIND WHATSOEVER WITH
RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO:
• "THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
• "WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• "DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
• "THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• "COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL
SHALL BE CONSTRUED TO CREATE AN EXPRESS
WARRANTYOFANYKIND WHATSOEVERWITH RESPECT
TO THE PRODUCT. ALL IMPLIED WARRANTIES AND
CONDITIONS THAT MAY ARISE BY OPERATION OF LAW,
INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE
SAME DURATION OF TIME AS THE EXPRESS WRITTEN
WARRANTYSTATED HEREIN.SOMESTATES/ PROVINCES
DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTYLASTS,SO THEABOVELIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG
SHALLNOTBELIABLEFORANYDAMAGESOFANYKIND
RESULTING FROM THE PURCHASE, USE, OR MISUSE OF,
OR INABILITY TO USE THE PRODUCT OR ARISING
DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF
USE OF THE PRODUCT OR FROM THE BREACH OF THE
EXPRESS WARRANTY, INCLUDING INCIDENTAL,
Health and Safety Information
178
SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR
LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR
DAMAGES ARISING FROM ANY TORT (INCLUDING
NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BYSAMSUNG,ITSAGENTSOREMPLOYEES,
ORFORANYBREACH OFCONTRACTORFORANYCLAIM
BROUGHTAGAINSTPURCHASERBYANYOTHERPARTY.
SOME STATES/ PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH
VARY FROM STATE TO STATE/ PROVINCE TO PROVINCE.
THIS LIMITED WARRANTY SHALL NOT EXTEND TO
ANYONE OTHER THAN THE ORIGINAL PURCHASER OF
THIS PRODUCT AND STATES PURCHASER'S EXCLUSIVE
REMEDY. IFANYPORTION OFTHISLIMITED WARRANTY
IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF
ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS
LIMITED WARRANTY WHICH PURCHASER
ACKNOWLEDGESISAND WILLALWAYSBECONSTRUED
TO BELIMITED BYITSTERMSORASLIMITED ASTHELAW
PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR
EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.
SAMSUNG MAKES NO WARRANTIES OR
REPRESENTATIONS AND THERE ARE NO CONDITIONS,
EXPRESSORIMPLIED,STATUTORYOROTHERWISE,ASTO
THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY
Health and Safety Information
179
SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-
PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH
THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE
ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCEAND SUITABILITYOFANYSUCH THIRD-
PARTYSOFTWAREOREQUIPMENTLIESOLELYWITH THE
PURCHASER AND THE DIRECT VENDOR, OWNER OR
SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk ofProduct failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to
make modifications to this Limited Warranty, or make
additional warranties binding on SAMSUNG. Accordingly,
additional statements such as dealer advertising or
presentation, whether oral or written, do not constitute
warranties by SAMSUNG and should not be relied upon.
Samsung Telecommunications America, L.P.
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2005 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior
Health and Safety Information
180
written approval. Specifications and availability subject to
change without notice.
Intellectual Property Statement
All Intellectual Property, as defined below, owned by or which
is otherwise the property ofSamsung or its respective suppliers
relating to the SAMSUNG Phone, including but not limited to,
accessories, parts, or software relating thereto (the "Phone
System"), is proprietary to Samsung and protected under
federal laws, state laws, and international treaty provisions.
Intellectual Property includes, but is not limited to, inventions
(patentable or unpatentable),patents,trade secrets,copyrights,
software, computer programs, and related documentation and
other works of authorship. You may not infringe or otherwise
violate the rights secured by the Intellectual Property.
Moreover, you agree that you will not (and will not attempt to)
modify, prepare derivative works of, reverse engineer,
decompile, disassemble, or otherwise attempt to create source
code from the software. No title to or ownership in the
Intellectual Property is transferred to you. All applicable rights
of the Intellectual Property shall remain with SAMSUNG and
its suppliers.
Health and Safety Information
181
Samsung Telecommunications America (STA), L.P.
Internet Address: http://www.samsungusa.com
©2005 Samsung Telecommunications America. Samsung is a
registered trademark ofSamsung Electronics America,Inc.and
its related entities.
®
Openwave is a registered Trademark of Openwave, Inc.
®
RSA is a registered Trademark RSA Security, Inc.
Headquarters:
Customer Care Center:
1601 E. Plano Parkway, Suite 150
Plano, TX 75074
1301 E. Lookout Drive
Richardson, TX 75082
Tel: 972.761.7000
Toll Free Tel: 1.888.987.HELP
Health and Safety Information
182
Downloading
Keys
E
EMS (Enhanced Message Ser-
L
Locking
Lower-case characters
F
FDN (Fixed Dial Number) mode
Forwarding
M
Memory status
Menus
Messages
G
Games
H
I
Images
K
Keypad tones
Index
184
Multimedia messages
Phonebook
Muting
N
PIN
PIN2
Names
Numbers, phone
R
O
Recording
Redialing
P
Password
Phone
S
SDN (Service Dialing Numbers)
Index
185
SIM card
SMS (Short Message Service)
U
Upper-case characters
Standard Limited Warranty
, 175
Switching on/off
T
Tasks, to do list
V
Voice memo
Volume, adjust
Volume,adjusting
W
Text message
WAP browser
Tone
Index
186
|