SGH-t709
P O R T A B L E T r i - B a n d
T E L E P H O N E
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
UVFE5_1.0_WBT709_062606_F4
Printed in Korea.
GH68-08160A
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH
THEPRODUCT, THEPURCHASERTAKESTHEPRODUCT"AS
IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP
OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TOTHEPRODUCT.INADDITION,SAMSUNGSHALLNOTBE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS.
Table of Contents
Table of Contents
1
2
Table of Contents
3
4
Activating Your Phone
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available, and many others.
Installing the SIM Card
Important! The plug-in SIM card and its contacts can be easily damaged
by scratching or bending, so be careful when handling, inserting, or
removing the card.
Keep all SIM cards out of reach of small children.
If necessary, switch off the phone by holding down the
key until the power-off image displays.
To install the SIM card, do the following:
1. Push in the battery lock toward the top of the phone and
hold it in that position.
2. Lift the battery away, as shown.
6
Activating Your Phone
3. Slide the SIM card into the SIM card socket so that the
card locks into place. Make sure the gold contacts of the
card face into the phone.
Note: When you need to remove the SIM card, slide it as
shown, and take it out of the socket.
Section 1: Getting Started
7
4. Place the battery so that the tabs on the end align with
the slots at the bottom of the phone (1).
5. Press the battery down until it clicks into place (2). Make
sure that the battery is properly installed before
switching on the phone.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery.
A travel adapter comes with your phone for charging
the battery. Use only approved batteries and chargers.
Ask your local Samsung dealer for further details.
You can use the phone while the battery is charging, but
this causes the phone to charge more slowly.
Note: You must fully charge the battery before using your phone for the
first time. A discharged battery recharges fully in approximately 200
minutes.
1. With the battery in position on the phone, plug the
connector of the travel adapter into the jack at the
bottom of the phone.
8
Activating Your Phone
2. Plug the adapter into a standard AC wall outlet.
Note: For connection to an electrical supply not located in the U.S., you
must use an adaptor of the proper configuration for the power outlet. Use
of the wrong adapter could damage your phone and void your warranty.
3. When charging is finished, unplug the adapter from the
power outlet and disconnect it from the phone by
pressing the buttons on both sides of the connector (1)
and pulling the connector out (2).
Section 1: Getting Started
9
Note: You must unplug the adapter before you remove the battery from the
phone during charging; otherwise, the phone could be damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of talk
time remain, a warning tone sounds and the “Battery
low” message repeats at regular intervals on the display.
When this happens, your phone turns off the backlight to
conserve the remaining battery power.
When the battery level becomes too low, the phone
automatically turns off.
Switching the Phone On or Off
1. Slide the phone open.
2. Press and hold the
key until the phone switches on.
3. If the phone asks for a PIN, enter the PIN and press the
The phone searches for your network and after finding it,
the Idle screen appears. Now, you can make or receive
calls.
Note: The display language is preset to English at the factory. To change
the language, use the Language menu. For further details, see "Language"
4. When you wish to switch off the phone, press and hold
the
key until the power-off image displays.
10
Setting Up Your Voice Mail
Setting Up Your Voice Mail
For new users, follow the instructions below to set up
voicemail:
1. Open your phone to access the keypad.
2. In Idle mode, press and hold the
key on the keypad.
You may be prompted to enter a password.
3. Follow the tutorial to create a password, a greeting, and
your name.
Note: These steps may be different depending on your network.
Accessing Your Voice Mail
You can access your Voice Mail by pressing the
key
on the keypad or by going to the menu. To access Voice
Mail using the menu:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Highlight Messages and press the Select soft key or the
key.
3. Highlight Voice mail and press the Select soft key or the
key.
4. Highlight Call voice mail and press the Select soft key
or the key. Your phone dials the specified voice mail
number.
5. When connected, follow the voice prompts from the
voice mail center.
Section 1: Getting Started
11
Changing the Voice Mail Number
Your SIM card gives you the default service number of
the voice mail center. However, should you need to
change the number, use the following procedures:
1. In Idle mode, press the Menu soft key to access the
Menu mode.
2. Highlight Messages and press the Select soft key or the
key.
3. Highlight Voice mail and press the Select soft key or the
key.
4. Highlight Voice server number and press the Select
soft key or the key. Highlight Voice mail and press
the Options soft key.
5. Highlight Edit and press the Select soft key or the
key. Or, you may highlight Delete to delete the number.
6. Edit the name if desired, and then press the Down
Navigation key to edit the number.
7. Press the Options soft key, highlight the Save option,
and press the Select soft key or the key.
8. Press the
key to return to Idle mode.
12
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• View of Your Phone
• Keys
• Display Layout
• Get More Help
This section outlines some key features of your phone. It
also describes the screen and the icons that are displayed
when the phone is in use.
Section 2: Understanding Your Phone
13
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many
significantfeatures.Thefollowinglistoutlinesafewofthe
features included in your phone.
• Wi-Fi® (Wireless Fidelity) capability
• Voice Commands
• Instant Messaging capability
• Multimedia capability
• Fun & Apps feature provides My files, audio player, camera,
voice recognition, games, image editor, alarms, calendar,
calculator, world time, unit conversion, timer, and stopwatch.
View of Your Phone
The following illustrations show the main elements of
your phone:
14
Keys
Keys
The following list correlates to the illustrations.
1. During a call, adjusts the earpiece volume.
In Idle mode with the phone open, adjusts the ring
volume. With the phone closed, turns on the display
when held down.
2.
Performs the functions indicated by the screen text on
the bottom line of the display.
3. Makes or answers a call.
In Idle mode, displays the Call records menu.
4. In Idle mode, accesses voice mail when held down.
5. Enters special characters. Performs various functions.
6. The microphone used during phone calls and voice
memo recordings.
7. Enters numbers, letters, and some special characters.
8. The Cancel key deletes characters from the display.
In Menu mode, it returns you to the previous menu level.
Section 2: Understanding Your Phone
15
9. Ends a call. Also switches the phone on and off when
held down.
In Menu mode, cancels your input and returns the phone
to Idle mode.
10. In Idle mode, launches the WAP (Wireless Application
Protocol) browser.
In Menu mode, selects the highlighted menu options.
11. In Menu mode, scrolls through the menus and
Phonebook.
In Idle mode:
• Down key: allows you to access your Contact list directly.
• Up key: allows you to access the Camera or Camcorder
feature directly.
• Left key: allows you to access Text messaging directly.
• Right key: allows you to access Voice Recognition directly.
When entering text, moves the cursor to the left or right,
depending on which side you press.
12. Display area where text and graphics are displayed.
13. Used to listen to audio from your phone.
14.
The headset jack is used for the hands-free headset.
15. The camera key is used to launch the camera (with a
press and hold) and to take a photo (with a short press).
16. The mirror allows you to adjust the camera when taking
a picture of yourself.
17. The built-in digital camera/camcorder has video capture
capabilities.
16
Display Layout
Display Layout
The display has 4 areas:
Icons
Shows the received signal strength. The greater the
number of bars, the stronger the signal.
Appears when a new text message or voice mail has
been received.
Appears when a new multimedia message has been
received.
Appears when you set an alarm to ring at a specified
time. For details, see page "Alarm" on page 128.
Appears when you are out of your service area.
Appears when a call is in progress.
Appears when the Call Forwarding feature is active. For
details, see page "Call forwarding" on page 103.
Appears when Alert type is vibration or you set the phone
to vibrate when you receive a call.
Section 2: Understanding Your Phone
17
Appears when Silent Mode is active.
Appears when Mute is active.
Shows the level of your battery. The more bars you see,
the more power you have remaining.
Backlight
A backlight illuminates the display and the keypad.
When you press any key or slide the phone open, the
backlight comes on. It goes off when no keys are pressed
withinagivenperiodoftime,dependingonthesettingin
the Backlight menu. The display turns off after one
minute to conserve battery power.
TheOnsettingishowlongthekeypadbacklightison.You
can select 15 seconds, 30 seconds, 1 minute, 3 minutes, or
10 minutes.
The Dim option is how much longer after the keypad
backlight goes off that the display remains lit. You can
select Off, 5 seconds, 15 seconds, 30 seconds, 1 minute, or
3 minutes.
To specify your Backlight settings:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Settings icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Display settings option and press the
Select soft key or the key.
4. Highlight the Backlight option and press the Select soft
key or the key.
18
Get More Help
5. Highlight the On option. Use the Left or Right Navigation
key to select the time that the backlight is on. You may
choose between 15 seconds, 30 seconds, 1 minute, 3
minutes, or 10 minutes.
6. Press the Down key to take you to the Dim option. Use
the Left or Right Navigation key to select the time that
Dimming mode is on. You may choose between Off, 5
seconds, 15 seconds, 30 seconds, 1 minute, or 3
minutes.
7. Press the Save soft key to save your settings.
Get More Help
Get More Help is designed to show you some of the
featuresofyourphoneusingt-zones. Youcansearchhelp
files on the fly while traveling, at home or anywhere,
using help.wap.t-mobile.com.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Get More Help
icon. Press the Select soft key or the
key.
3. You will enter t-zones and the Get More Help menu will
be displayed.
The following options are available:
• Browse Help Topics: this option gives you a list of different
topics that you can select.
• Enter a Search: this option allows you to enter a keyword to
search on.
Section 2: Understanding Your Phone
19
• About: this option offers general information about Get More
Help including concept and site design, copyright information,
and contact e-mail address.
To access the browser options menu:
1. Press the Menu soft key to see the Browser Options.
2. Make a selection and press the Select soft key or the
key.
Note: The menus may vary, depending on your version of t-zones.
For more information on browser options, see "Selecting
20
Section 3: Call Functions
Topics Covered
• Making a Call
• Adjusting the Call Volume
• Answering a Call
• Call Records
• Silent Mode
• Selecting Functions and Options
Thissectiondescribeshowtomakeoransweracall.Italso
includes information on the features and functionality
associated with making or answering a call.
Section 3: Call Functions
21
Making a Call
When the idle screen displays, enter the number you
wish to dial and press the
key.
Note: When you activate the Auto redial option in the Extra settings menu,
the phone will automatically redial up to 10 times when the person does
not answer the call or is already on the phone, provided your call is not sent
Making an International Call
1. Press and hold the
key. The + character appears.
2. Enter the country code, area code, and phone number
and press the
key.
Correcting the Number
1. To clear the last digit displayed, press the
key.
2. To clear any other digit in the number, press the Left or
Right key until the cursor is immediately to the right of
the digit to be cleared. Press the
enter a missing digit.
key. You can also
3. To clear the whole display, press and hold the
Ending a Call
key.
Whenyouwanttofinishyourcall,brieflypressthe key.
Redialing the Last Number
The phone stores the numbers of the calls you’ve dialed,
received, or missed if the caller is identified.
To recall any of these numbers:
1. If you have typed characters on the display, press the
22
Making a Call
key to return to Idle mode.
2. Press the key to display a list of the most recent
numbers used in the order you dialed or received them.
3. Use the Up and Down keys to scroll through the
numbers and highlight the number you want.
4. To dial the number, press the
key.
Before you dial the number, you may press the Options
soft key for the following options:
•
Details: displays details of the number including name,
number, and dates and times of calls.
•
•
Call back: places a call back to the number.
Send message: allows you to send a text message, picture
message, or voice note to the number.
• Store to phonebook: stores the number in your
phonebook.
• Delete: allows you to delete the number or delete all call
records.
Making a Call from the Phonebook
You can store phone numbers that you use regularly on
the SIM card or in the phone’s memory. These entries are
collectively called the Phonebook.
Once you have stored a number in the Phonebook, you
candialitbypressingafewkeys.Youcanalsoassignyour
mostfrequently-usednumberstonumberkeysusingthe
Speed Dial feature.
For further details about the Phonebook feature, see
Section 3: Call Functions
23
Adjusting the Call Volume
During a call, if you want to adjust the earpiece volume,
use the Volume keys on the left side of the phone.
Press the
key to increase the volume level and the
key to decrease the level.
In Idle mode, you can also adjust the ring volume using
these keys while the phone is open.
Answering a Call
When somebody calls you, the phone rings and displays
the incoming call image.
The caller’s phone number, or name if stored in
Phonebook, displays.
1. If necessary, slide the phone open. Press the
key or
the Accept soft key to answer the incoming call.
24
Call Records
If the Up option in the Slide settings menu is set to
Accept call, you can answer the call by simply sliding
the phone open.
If the Anykey answer option in the Extra Settings menu
is activated, you can press any key to answer a call
except for the
key and the Reject soft key.
Note: To reject an incoming call, press the Reject soft key or
key.
2. End the call by closing the phone or pressing the
key.
Note: You can answer a call while using the Phonebook or menu features.
After ending the call, the phone returns to the function screen you were
using.
Call Records
All incoming, outgoing and missed calls are listed in the
Call Records. You can also view Call time records.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Call records
icon. Press the Select soft key or the key to enter the
menu.
Note: You can also access the call records of incoming, outgoing, and
missed calls by pressing the
key in Idle mode.
The following Call Record options are available:
Section 3: Call Functions
25
All calls
This menu lets you view the 90 most recent calls you
received, sent, and missed.
The number or name, if already stored in your
Phonebook, displays with the number of occurrences of
each number.
Note: at any time while you are in Call Records, you may use the Left or
Right Navigation key to scroll between All calls, Missed calls, Incoming
calls, and Outgoing calls.
Missed calls
This menu lets you view the 30 most recent calls you
received, but did not answer.
The number and name, if already stored in your
Phonebook, displays with the number of occurrences of
each number.
Viewing Missed Calls
When you are unable to answer a call for any reason, you
can find out who is calling you, if this service is available,
so that you can call the person back.
The number of calls you have missed displays on the idle
screen immediately after a call is missed.
To view a missed call immediately:
1. If the phone is closed, slide the phone open.
2. Press the View soft key.
Thenumbercorrespondingtothemostrecentmissedcall
displays, if available.
26
Call Records
3. To scroll through the missed calls, press the Up or Down
Navigation key.
4. To call the number displayed, press the
key.
5. Press the Options soft key for the following options:
• Details: displays details of the number including name,
number, and dates and times of calls.
• Call back: places a call back to the number.
• Send message: allows you to send a text message, picture
message, or voice note to the number.
• Store to phonebook: stores the number in your
phonebook.
• Delete: allows you to delete the number or delete all call
records.
You can press the
key at any time to exit the Missed
Call feature.
Incoming calls
This menu lets you view the 30 most recent calls you
received.
The number and name, if already stored in your
Phonebook, displays with the number of occurrences of
each number.
Outgoing calls
This menu lets you view the 30 most recent calls you
dialed.
The number and name, if already stored in your
Phonebook, displays with the number of occurrences of
each number.
Section 3: Call Functions
27
Delete all
This menu allows you to delete all of the records in each
call record separately, or you can delete all of your call
records at one time.
1. Highlight the type of calls you want to delete and press
the Select soft key or the
key to make a check mark.
2. Press the Delete soft key to delete the calls.
3. When a confirmation message displays, press the Yes
soft key or
key to confirm.
Call time
This menu lets you view the time log for calls made and
received.
Note: The actual time invoiced by your service provider may differ from
times displayed due to network features and service plan.
The following time logs are available:
• Last call time: shows the length of your last call.
• Total incoming: shows the total length of all calls you have
received since the timer was last reset.
• Total outgoing: shows the total length of all calls you have
made since the timer was last reset.
• Life time: shows the total length of time for incoming and
outgoing calls. The length of call time must be at least 1 minute
to increment this field. This information cannot be cleared.
• Reset timers: allows you to reset the call timers. At the Are
you sure? prompt, press the Yes soft key. Enter the phone
password and then press the OK soft key or
key.
28
Silent mode
Note: The password is preset to “00000000” at the factory. To change this
Silent mode
Silent mode is convenient when you wish to stop the
phone from making noise, in a theater for example.
In Idle mode, press and hold the
key until the “Silent
Mode On” message and the Silent mode icon ( ) display.
In Silent mode, instead of sounds, your phone will
vibrate.
To exit and reactivate the previous sound settings, press
and hold the
key again until the “Exit Silent Mode”
message appears. The Silent mode icon ( ) no longer
displays.
Selecting Functions and Options
Your phone offers a set of functions that allow you to
customize it. These functions are arranged in menus and
sub-menus, accessed using the two soft keys. Each menu
andsub-menuallowsyoutoviewandalterthesettingsof
a particular function.
Soft Keys
Therolesofthesoftkeys varydependingonthe function
you are currently using. The labels on the bottom line of
thedisplayjustaboveeachkeyindicatetheircurrentrole.
Section 3: Call Functions
29
Press the left soft key
for Menu mode.
Press the right soft key
to access the t-zones
menu.
Selecting Options
To view the various functions and options available and
to select the one you want:
• Press the appropriate soft key.
• To select the function displayed or the option highlighted, press
the Select soft key or the
key.
• To view the next function or highlight the next option on a list,
press the Down Navigation key.
• To move back to the previous function or option on a list, press
the Up key.
• To move back up one level in the menu structure, press the
Back soft key.
• To exit the menu structure without changing the settings, press
the
key.
When you access a list of options, your phone highlights
the currently active option. If, however, there are only
two options, such as On/Off or Enable/Disable, your
phone highlights the option that is not currently active,
so that you can select it directly.
30
Selecting Functions and Options
Options During a Call
Your phone provides a number of control functions that
you can use during a call.
Putting a Call on Hold
Youcanplacethecurrentcallonholdwheneveryouwant.
You can make another call while you have a call in
progress if your network supports this service.
To place a call on hold, simply press the Options soft key,
highlight the Hold option, then press the Select soft key
or the
key. You can reactivate the call whenever you
want, by pressing the Resume soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or look it up
in the Phonebook.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or:
1. Press the Options soft key and select Hold.
2. Make the second call in the normal way.
When you have an active call and a call on hold, you may
switchbetweenthetwocalls,changingtheoneonholdto
active and placing the other on hold.
To switch between the two calls, simply press the
Options soft key and select Swap.
The current call is placed on hold and the call on hold is
reactivatedsothatyoucancontinueconversingwiththat
person.
Section 3: Call Functions
31
When you want to finish, end each call normally by
pressing the key.
Switching off the Microphone (Mute)
Youcantemporarilyswitchyourphone’smicrophoneoff,
so that the other person cannot hear you.
Example: You wish to say something to a person in the room but do not
want the person on the phone to hear you.
To switch the microphone off temporarily:
1. Press the Options soft key and highlight Mute.
2. Press the Select soft key or the
key. The other person
can no longer hear you. The Mute icon is displayed.
To switch the microphone back on:
1. Press the Options soft key and highlight Unmute.
2. Press the Select soft key or the
key. The other person
can hear you again.
Using the Speakerphone
While on a call, you can use your Speakerphone by
following these steps:
1. Press the Spkr on soft key to turn the Speakerphone on.
2. To turn the Speakerphone off, press the Spkr off soft
key.
Muting or Sending Key Tones
These options allow you to turn the key tones off or on. If
the Mute keys option is selected, your phone does not
transmittheDTMF(DualToneMulti-Frequency)tonesof
32
Selecting Functions and Options
the keys, which allows you to press keys without hearing
annoying key tones during a call.
Note: To communicate with answering machines or computerized
telephone systems, the Send DTMF option must be selected.
Send DTMF
You can use the Send DTMF option to send a key string
ornumberduringaphonecall.Forexample,youcansend
a calling card number by DTMF while on a call. Select the
SendDTMFoptionandenteranumber.PresstheOKsoft
key and the number is sent.
Searching for a Number in Phonebook
You can search for a number in Phonebook during a call.
1. Press the Options soft key or the
2. Press the Down key to highlight the Phonebook option
and press the Select soft key or the key.
3. Press the Down key to highlight the Contact list option
key.
and press the Select soft key or the
key.
The Phonebook entries are listed.
4. Enter the name that you wish to find in the textbox
located above the entries. If you enter the first few letters
of the name, the Phonebook entries are listed starting
with the first entry matching your input.
Or, use the Up or Down Navigation key to highlight the
contact that you desire.
5. To view the highlighted entry, press the Options soft
key.
Section 3: Call Functions
33
6. Highlight the View option and press the Select soft key
or the key. The Contact is displayed.
For further details about the Phonebook feature, see
Call Waiting
You can answer an incoming call while you have a call in
progress, if this service is supported by the network and
you have set the Call waiting menu to Activate. You are
notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the
key or the Accept softkey to answer the
incoming call. The first call is automatically put on hold.
2. To switch between the two calls, press the Options soft
key, highlight Swap and press the Select soft key or the
key.
Toendacallonhold,presstheOptionssoftkeyandselect
theEndheldcalloption. ThenpresstheSelect softkeyor
the
key.
To end the current call, press the
key.
Making a Multi-Party Call
Amulti-partycallisanetworkservicethatallowsuptosix
people to take part simultaneously in a multi-party or
conference call.
For further details about subscribing to this service,
contact your service provider.
34
Selecting Functions and Options
Setting up a Multi-Party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first
call is automatically put on hold.
3. To join the first participant to the multi-party call, press
the Options soft key or the
key and select Join.
Press the Select soft key or the
key.
4. To add a new person to the multi-party call, call the new
person in the normal way and then press the Options
soft key or the
the Select soft key or the
key. Select the Join option and press
key.
You can add incoming callers by answering the call and
pressing the Options soft key or the key, and selecting
Join. Repeat as required.
Having a Private Conversation With One Participant
1. Press the Options soft key or the
key and choose the
Split option. Press the Select soft key or the
key.
The list of call participants appears.
2. Highlight a person you wish to talk privately with by
pressing the Up or Down Navigation key, and press the
Select soft key or the
key.
Now you can talk only to that person. The other
participants can continue to converse with each other.
3. To return to the multi-party call, press the Options soft
key or the
key or the
key and select Join. Press the Select soft
key.
Section 3: Call Functions
35
All of the multi-party call participants can now hear each
other.
Dropping One Participant
1. Press the Options soft key or the
key and choose the
Split option. Press the Select soft key or the
key.
The list of call participants appears.
2. Highlight the person you want to keep and press the
Select soft key or the key. Press the Options soft key
and highlight End held multiparty. Press the Select soft
key or the key.
The call with the participant on hold will end, but you can
continue to talk to the other participants.
3. When you want to end the multi-party call, close the
phone or press the
key.
36
Menu Navigation
You can tailor the phone’s range of functions to your
needs using menus and sub-menus. Menus and sub-
menus can be accessed by scrolling using the Navigation
keys or by using the shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Scroll using the Navigation keys to reach a main menu,
Settings for example. Press the Select soft key or the
key to enter the menu.
3. If the menu contains sub-menus, Security for example,
you can access them by pressing the Select soft key or
the
key after the sub-menu has been highlighted.
If the menu that you have selected contains further
options, repeat this step.
4. To scroll through the menus, press the Up or Down
Navigation keys.
5. To confirm the chosen setting, press the Select soft key,
or the
6. To return to the previous menu level, press the Back soft
key, or the key.
key.
7. To exit the menu without changing the settings, press the
key.
Using Shortcuts
Themenuitems,suchasmenus,sub-menus,andoptions,
are numbered and can be accessed quickly by using their
38
Menu Outline
shortcut numbers. For the main menus, you can access
any one of them by pressing the number keys (1 to 0)
corresponding to their location on the screen.
Example: Accessing the Security menu.
1. Press the Menu soft key.
2. Press the
key for Settings.
3. Press the
key for Security.
Menu Outline
Thefollowinglistshowsthemenustructureandindicates
the number assigned to each option.
1
2
Voice notes
Call records
2.1 All calls
2.2 Missed calls
2.3 Incoming calls
2.4 Outgoing calls
2.5 Delete all
2.6 Call time
2.6.1
2.6.2
2.6.3
2.6.4
2.6.5
Last call time
Total incoming
Total outgoing
Life time
Reset timers
3
t-zones
3.1 Home
Section 4: Menu Navigation
39
3.2 Favorites
3.3 Go to URL
3.4 Clear cache
4
IM
4.1 AIM
4.1.1
4.1.2
4.1.3
4.1.4
4.1.5
Sign on
Saved conversations
Offline conversations
Settings
Help
4.2 ICQ
4.2.1
4.2.2
4.2.3
4.2.4
4.2.5
Connect
Saved conversations
Offline conversations
Settings
Help
4.3 Yahoo!
4.3.1
4.3.2
4.3.3
4.3.4
4.3.5
Sign in
Saved conversations
Offline conversations
Settings
Help
5
Messages
5.1 Create new
5.1.1
5.1.2
5.1.3
Text message
Picture message
Voice note
5.2 Inbox
5.3 Sentbox
5.4 Outbox
5.5 Drafts
40
Menu Outline
5.6 Templates
5.6.1
Text template
5.6.2
Picture message template
5.7 Voice mail
5.7.1
Call voice mail
5.7.2
Voice server number
5.8 Delete all
5.9 Settings
5.9.1
Text message
5.9.2
Picture message
5.10 Broadcast messages**
5.11 Memory status
6
Fun & Apps
6.1 My Files
6.1.1
6.1.2
6.1.3
6.1.4
6.1.5
Sounds
Images
Videos
Music
Memory status
6.2 Audio player
6.3 Camera
6.4 Voice recognition
6.5 Games
6.6 Image editor
6.7 Organizer
6.7.1
6.7.2
6.7.3
6.7.4
6.7.5
6.7.6
Alarm
Calendar
Calculator
World time
Unit conversion
Timer
Section 4: Menu Navigation
41
6.7.7
Stopwatch
7
8
Get More Help
Phonebook
8.1 Add new contact
8.2 Contact list
8.3 Group
8.4 Speed dial
8.5 My name card
8.6 Own number
8.7 FDN list
8.8 Management
8.8.1
8.8.2
8.8.3
8.8.4
8.8.5
Default Saving
Copy all to phone
Sort by contacts
Delete all
Memory status
9
Settings
9.1 Wi-Fi
9.1.1
9.1.2
9.1.3
9.1.4
9.1.5
9.1.6
9.1.7
Available Networks
Saved Networks
Quick Connect
Turn Wi-Fi Off/On
Get Security Key
Add new network
Wi-Fi Help
9.2 Time & Date
9.3 Phone settings
9.3.1
9.3.2
9.3.3
Language
Greeting message
Slide settings
42
Menu Outline
9.3.4
Extra settings
9.4 Display settings
9.4.1
9.4.2
9.4.3
9.4.4
9.4.5
9.4.6
9.4.7
Wallpaper
Interior display
Brightness control
Backlight
Dialing display
Calendar
Show caller information
9.5 Sound settings
9.5.1
9.5.2
9.5.3
9.5.4
9.5.5
9.5.6
9.5.7
Incoming call
Keypad tone
Message tone
Power on/off
Slide tone
Silent mode
Extra tones
9.6 Network services
9.6.1
9.6.2
9.6.3
9.6.4
9.6.5
Call forwarding
Call barring**
Call waiting
Network selection
Caller ID
9.7 Security
9.7.1
9.7.2
9.7.3
9.7.4
9.7.5
9.7.6
9.7.7
PIN check
Change PIN
Phone lock
Change password
Privacy
FDN mode
Change PIN2
9.8 Memory status
9.8.1
Shared memory
9.8.2
Messages
Section 4: Menu Navigation
43
9.8.3
9.8.4
9.8.5
9.8.6
My files
Calendar
Phonebook
Games
9.9 Reset settings
** Shows only if supported by your SIM card.
44
Section 5: Entering Text
Topics Covered
• Changing the Text Input Mode
• Using ABC Mode
• Using T9 Mode
• Using Number Mode
• Using Symbol Mode
This section outlines how to select the desired text input
mode when entering characters into your phone. This
section also describes how to use the T9 predictive text
entry system to reduce the number of key strokes
associated with entering text.
Section 5: Entering Text
45
Changing the Text Input Mode
Whenusingyourphone,youwilloftenneedtoentertext,
suchaswhenstoringanameinyourPhonebook,creating
your personal greeting or scheduling events on your
calendar.Youcanenteralphanumericcharactersbyusing
your phone’s keypad.
Your phone has the following text input modes:
• ABC mode: this mode allows you to enter letters by pressing
the key labeled with the letter you want. How many times you
press the key determines which letter or number appears.
• T9 mode: this mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more than one
letter; for example, pressing
can enter J, K, or L. However,
the T9 mode automatically compares the series of keystrokes
you make with an internal linguistic dictionary to determine the
most likely word, thus requiring far fewer keystrokes than the
traditional ABC mode.
• Number mode: this mode allows you to enter numbers.
• Symbol mode: this mode allows you to enter symbols, such as
punctuation marks.
When you are in a field that allows characters to be
entered, you will notice the text input mode indicator on
the display.
Example: Writing a text message.
46
Using ABC Mode
1. To change the text input mode, press the Right soft key.
2. Each time you press the Right soft key, a different Text
input mode indicator will be displayed at the lower right
corner of your display.
The following options are available:
: T9 mode
: Number mode
: Symbol mode
: ABC mode
3. When the text input mode indicator that you desire is
displayed, you may enter text in the text message box
using the selected text input mode.
Using ABC Mode
TouseABCmode,usethenumberkeystoenteryourtext.
1. Press the key labeled with the letter you want:
• Once for the first letter
• Twice for the second letter
Section 5: Entering Text
47
• And so on
2. Select the other letters in the same way.
• To enter periods, hyphens, or apostrophes, press the
key. ABC mode applies grammar rules to ensure that correct
punctuation is used.
• To shift case in ABC mode, use the
key. There are 3
cases: Initial capital, Capital lock, and Lower case.
• You can move the cursor by using the Navigation keys. To
delete letters, press the
key. Press and hold the
key to clear the display.
Note: The cursor moves to the right when you press a different key. When
entering the same letter twice or a different letter on the same key, just
wait for a few seconds for the cursor to move to the right automatically,
and then select the next letter.
Keys
48
Using T9 Mode
Using T9 Mode
T9 is a predictive text input mode that allows you to key
in any character using single keystrokes. This text input
mode is based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word by
pressing the 2 to 9 keys. Press each key only once for
each letter.
Example: To enter “Hello” in T9 mode, press the 4, 3, 5, 5, and 6 keys.
Section 5: Entering Text
49
The word that you are typing appears on the display. It
may change with each key that you press.
2. Enter the whole word before editing or deleting the
keystrokes.
3. When the word displays correctly, go to step 4.
If the word doesn’t display correctly, press the
to display alternative word choices for the keys that you
have pressed.
key
Example: Both “Of” and “Me” have the 6 and 3 keys. The phone displays
the most commonly used choice first.
4. Insert a space by pressing the
key and start entering
the next word.
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the word you
want to add, press the
key to display the alternative
words.
2. When you press the
key at the last alternative word,
the display shows Spell on the bottom line. Press the
Spell soft key or the key.
3. Enter the word you want to add using ABC mode.
4. Press the OK soft key or the key.
The word is added to the T9 dictionary and becomes a
word for the associated keypress series.
Note: This feature may not be available for some languages.
50
Using Number Mode
• To enter periods, hyphens, or apostrophes, press the
key.
T9 mode applies grammar rules to ensure that correct
punctuation is used.
• To shift case in T9 mode, use the
key. There are 3 cases:
Initial capital, Capital lock, and Lower case.
• You can move the cursor by using the Navigation keys. To delete
letters, press the
clear the display.
key. Press and hold the
key to
Using Number Mode
Number mode enables you to enter numbers into a text
message. Press the keys corresponding to the digits you
want to enter.
Using Symbol Mode
Symbol mode enables you to insert symbols and
punctuation marks into text.
1. To select a symbol, press the corresponding number key.
2. To display more symbols, press the Up or Down
Navigation key.
3. To clear the symbol(s), press the
key. When the
input field is empty, this key returns the display to the
previous mode.
4. To insert the symbol(s) into your message, press the OK
soft key or the
key.
Section 5: Entering Text
51
52
Section 6: Understanding Your
Phonebook
Topics Covered
• Storing a Number in the Phone’s Memory
• Storing a Number in the SIM Card
• Finding a Phonebook Entry
• Speed Dialing
• Editing a Caller Group
• Copying all SIM Phonebook Entries
• Deleting all of the Phonebook Entries
• My Name Card
• Finding My Own Phone Number
• FDN List
• Management
This section describes how to manage your contacts by
storing their name and number in your Phonebook. You
can save phone numbers to your phone’s memory or to
your SIM card.
Section 6: Understanding Your Phonebook
53
Storing a Number in the Phone’s Memory
Thedefaultforsavingphonenumberstoyourphonebook
is your phone’s memory. You can also save it to your SIM
card or you can set your default so that whenever a new
phonebook entry is created, you will be prompted to
on page 65 for information on how to change this setting.
Also, numbers that have been stored on your SIM card can
be copied to your phone’s memory.
Note: When you copy a phone number from your SIM card to your phone,
the number will appear twice in your Contact list.
1. At the Idle screen, press the Down Navigation key to
highlight Phonebook. Press the Select soft key.
2. Scroll to Add new contact by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
3. Enter a first name in the Name text box. Tab to the next
text box by pressing the Down key.
For further details about how to enter characters, see
"Using ABC Mode" on page 47.
4. Enter a last name in the text box.
5. Highlight a number Type by pressing the Up or Down
Navigation key, then enter a number in the text box.
The following types are available:
• Mobile: assigns the number entered to the Mobile entry.
• Home: assigns the number entered to the Home entry.
• Office: assigns the number entered to the Office entry.
54
Storing a Number in the SIM Card
• Fax: assigns the number entered to the Fax entry.
• Other: allows you to enter more detailed information for the
entry.
6. Continue to scroll down using the Down Navigation key
to enter Email address, Picture ID, Ringtone, Group, and
Notes if desired.
7. Press the Save soft key or press the Options soft key
and highlight the Save option and press the Select soft
key or the
key. The number is saved to your phone
and the new contact information is displayed.
8. To return to the Idle screen, press the
key.
Storing a Number in the SIM Card
Thedefaultforsavingphonenumberstoyourphonebook
is your phone’s memory. To store a number in your SIM
card, you needto changetheDefaultSavingoption first.
1. At the Idle screen, press the Down Navigation key to
highlight Phonebook. Press the Select soft key.
2. Scroll to Management by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
3. Highlight Default saving and press the Select soft key
or the
key.
4. Highlight SIM card and press the Select soft key or the
key.
Note: You can also set the Default saving option to Ask on saving in the
Management menu. With this option, you will be prompted for storage
Section 6: Understanding Your Phonebook
55
location each time you add a new contact. See "Default saving" on page
65 for more information.
Now that your phone is set up to store numbers to your
SIM card, follow this procedure to store a number.
1. At the Idle screen, press the Down Navigation key to
highlight Phonebook. Press the Select soft key.
2. Highlight the Add new contact option and press the
Select soft key or the
key.
3. Enter a name in the Name text box. Tab to the next text
box by pressing the Down key.
For further details about how to enter characters, see
"Using ABC Mode" on page 47.
4. Enter a number you want to store and press the Save
soft key or the
card.
key. The number is saved in your SIM
After storing, the phone displays the Phonebook entry
you just created.
5. To use the entry options before saving the number, press
the Options soft key.
The following options are available:
• Save: saves the number in the SIM card.
• Language select: allows you to select between English,
French, or Spanish.
• Cancel: cancels the Add New Contact screen and returns you
to the previous menu.
6. To use the entry options after saving the number, press
the Options soft key.
56
Finding a Phonebook Entry
The following options are available:
• Edit: allows you to edit the name and number fields in the
entry.
• Send message: allows you to send a message to the
selected number. You may choose between Text messages,
Picture messages, or Voice notes.
• Call: allows you to call the number.
• Copy to: allows you to copy the number to your Phone, SIM
card or FDN.
• Send name card: allows you to send your name card via
Text message or Picture message.
• Assign speed dial: allows you to assign a speed dial key
number to the selected Phonebook entry.
• Delete: allows you to delete the name and number from
Phonebook. You are asked to confirm that you wish to delete
the name and number by pressing the Yes soft key. To cancel,
press the No soft key.
7. To return to the Idle screen, press the
key.
Finding a Phonebook Entry
You can store phone numbers and their corresponding
namesinyourSIMcardandphone’smemories.Theyare
physically separate but are used as a single entity, called
Phonebook.
Depending on your particular SIM card, the maximum
number of phone numbers the SIM card can store may
differ.
1. At the Idle screen, press the Down Navigation key to
highlight Phonebook. Press the Select soft key.
Section 6: Understanding Your Phonebook
57
2. Highlight Contact list and press the Select soft key or
the key.
3. Enter the first few letters of the name in the text box.
The Phonebook entries are listed, starting with the first
entry matching your input.
4. If needed, press the Up or Down Navigation key until the
entry you want is highlighted.
5. Once you have found the entry, press the
key to dial
the number, or press the Options soft key to access the
following Phonebook entry options:
• View: shows details of the Phonebook entry.
• Send message: allows you to send a message to the
selected number. You may choose between Text messages,
Picture messages, or Voice notes.
• New contact: takes you to the New Contact menu.
• Call: places a call to the number.
• Assign speed dial: allows you to assign a speed dial key
number to the selected Phonebook entry.
• Delete: allows you to delete the selected name and number
from your Phonebook or delete all numbers. You are asked to
confirm that you wish to delete the name and number by
pressing the Yes soft key. To cancel, press the No soft key.
• Language select: allows you to select between English,
French, or Spanish.
6. If you select the View option, press the Options soft key
after the contact information is displayed, for these
additional options:
• Edit: allows you to edit the name and number fields in the
entry. You can also add e-mail address and notes.
58
Speed Dialing
• Send message: allows you to send a message to the
selected number. You may choose between Text messages,
Picture messages, or Voice notes.
• Call: places a call to the number.
• Copy to: allows you to copy the number to your phone, SIM
card or FDN.
• Send name card via: allows you to send your name card
via Text message or Picture message.
• Assign speed dial: allows you to assign a speed dial key
number to the selected Phonebook entry.
• Delete: allows you to delete the name and number from
Phonebook. You are asked to confirm that you wish to delete
the name and number by pressing the Yes soft key. To cancel,
press the No soft key.
After viewing one Phonebook entry, you can scroll
through all Phonebook entries by pressing the Right or
Left Navigation keys.
Speed Dialing
Once you have stored phone numbers from your
Phonebook list, youcansetup to8 speeddialentriesand
then dial them easily whenever you want, simply by
pressing the associated numeric key.
In Idle mode, to speed dial the numbers assigned to keys
(2 to 9), press and hold the appropriate key.
Setting Up Speed Dial Entries
1. At the Idle screen, press the Down Navigation key to
highlight Phonebook. Press the Select soft key.
Section 6: Understanding Your Phonebook
59
2. Scroll to Speed dial by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
3. Use the Up or Down Navigation key to select the number
key to which you wish to assign the speed-dialing
number. Select from the 2 to 9 keys, and press the Add
soft key.
4. Highlight Contact list or FDN list and press the Select
soft key or the
5. Highlight the entry that you want to assign the speed dial
number to and press the Select soft key or the key.
key.
Note: Memory location 1 is reserved for your Voice mail server number and
cannot be changed.
6. In Idle mode, press and hold the speed dial number to
call the assigned number.
Editing a Caller Group
1. At the Idle screen, press the Down Navigation key to
highlight Phonebook. Press the Select soft key.
2. Highlight the Group option and press the Select soft key
or the
key.
3. Scroll through the group list by pressing the Up or Down
Navigation key.
4. Highlight the group you want and press the Options soft
key.
5. Highlight the Edit option and press the Select soft key or
the
key.
60
Editing a Caller Group
6. To edit the Caller group name, modify the text in the
Name text box.
7. To change the image associated with the Caller group,
press the Down key to highlight the Picture ID icon.
Press the
key.
The following options are available:
• Take picture: allows you to take a picture with your camera.
• My photos: allows you to choose a photo from My photos
folder.
• Downloaded images: allows you to choose a photo from
your downloaded images folder.
• Icons: allows you to choose from pre-defined icons
• My videos: allows you to choose a video from your My video
clips folder.
• Downloaded videos: allows you to choose a video from
your Downloaded videos folder.
• Do not assign: removes any image that was previously
used and sets to Not assigned status.
8. To change the ringtone associated with the Caller group,
press the Down key to highlight the Ringtone icon.
Press the
key.
The following options are available:
• Default melodies: allows you to choose between 20
different melodies.
• Voice list: allows you to assign a Ringtone from your Voice
list.
• My sounds: allows you to assign a Ringtone from your My
sounds folder.
• Music: allows you to assign a Ringtone from your Music list.
Section 6: Understanding Your Phonebook
61
9. When you are finished making your changes, press the
Save soft key. Your Caller group settings will be saved.
10. Press the
key to return to Idle mode.
Copying all SIM Phonebook Entries
You can copy all SIM entries to the Phone using this
option. When you copy entries to the phone, duplicate
entries are created in your Phonebook.
1. At the Idle screen, press the Down Navigation key to
highlight Phonebook. Press the Select soft key.
2. Highlight Management and press the Select soft key or
the
3. Highlight Copy all to phone and press the Select soft
key or the key.
key.
4. After receiving the Sure to copy all? confirmation
message, press the Yes soft key.
Note: Options are available for phone entries stored in the phone that are
not available when stored to the SIM card. For details see "Storing a
Note: When you copy a phone number from your SIM card to your phone,
the number will appear twice in your Contact list.
Deleting all of the Phonebook Entries
You can delete all your entries from your phone’s
memory, your SIM card, or both.
62
My Name Card
Important! Once Phonebook entries have been deleted, they cannot be
recovered.
1. At the Idle screen, press the Down Navigation key to
highlight Phonebook. Press the Select soft key.
2. Highlight Management and press the Select soft key or
the
key.
3. Scroll to Delete all by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
4. Press the
key to place a check mark by the memory
location you want to empty; All, Phone, SIM card, or SIM
card (FDN).
You can remove the check mark by pressing the
again.
key
5. Press the Delete soft key to delete the entries in the
selected memory location.
6. When the Delete? confirmation message appears, press
the Yes soft key or the key.
7. To cancel the deletion, press the No soft key.
8. When you are finished, press the key to return to Idle
mode.
My Name Card
Mynamecardallowsyoutocreateavirtualbusinesscard.
Oncecompleted, youcansendthecardtorecipientsasan
attachment.
1. At the Idle screen, press the Down Navigation key to
Section 6: Understanding Your Phonebook
63
highlight Phonebook. Press the Select soft key.
2. Highlight My name card and press the Select soft key or
the
key.
3. My Name Card opens with the Name field highlighted.
4. Enter information in each of the fields as desired. Use the
Navigation keys to move between fields, then use the
keypad to enter information.
5. When finished, press the Save soft key or press the
Options soft key and highlight the Save option. Press the
Select soft key or the
key.
Finding My Own Phone Number
Thisfunctionisamemoryaid,whichyoucanusetocheck
your own phone number if you need to do so.
You can assign a name to each of your own phone
numbers registered on your SIM card. You can also edit
the names and numbers. Any changes made here do not
in any way affect the actual subscriber numbers on your
SIM card.
1. At the Idle screen, press the Down Navigation key to
highlight Phonebook. Press the Select soft key.
2. Select the Own number option by pressing the Up or
Down Navigation key and press the Select soft key or
the
3. Highlight the Empty option and press the
phone number is displayed. You may edit the number if
you wish. Press the Save soft key or the key.
key.
key. Your
64
FDN List
FDN List
FDN (Fixed Dial Number) mode, if supported by your
SIM card, allows you to restrict your outgoing calls to a
limited set of phone numbers.
The FDN List allows you to set up a list of numbers that
your phone may dial.
FDN mode must first be enabled in the Security settings.
changing this setting.
ToenableFDNmode,aPIN2numberisrequired.Youcan
obtain your PIN2 from your service provider.
Management
The Management menu allows you to select where your
contacts will be saved, copy your SIM contacts to your
phone, sort your contacts, delete your contacts, or check
your memory status.
Default saving
The Default Saving option allows you to choose where
your contacts will be saved. The following options are
available:
• SIM card: new phonebook contacts will be saved to your SIM
card.
• Phone memory: new phonebook contacts will be saved to your
phone.
• Ask on saving: you will be prompted to choose between Phone
or SIM card whenever you save a new contact.
Section 6: Understanding Your Phonebook
65
Copy all to phone
ThisoptionallowsyoutocopyallcontactsfromyourSIM
card to your phone. For more information, see "Copying
Sort by contacts
This option allows you to sort contacts stored to your
phone’s memory, by first name or last name.
Note: Contacts stored to your SIM card do not have first and last names as
separate fields. Therefore, they will be sorted on the first letter of the name
entered in the Name field.
Delete all
Important! Once contact entries have been deleted, they cannot be
recovered.
This option allows you to delete your contacts. You may
delete from All, Phone, SIM card, or SIM card (FDN). For
more information, see "Deleting all of the Phonebook
Memory status
You can check how many names and numbers are stored
in the Phonebook. You can see how many are stored in
your phones’s memory and on your SIM card, and how
many are stored as FDNs. You can also see the capacity of
the three memories.
1. At the Idle screen, press the Down Navigation key to
highlight Phonebook. Press the Select soft key.
66
Management
2. Highlight Management and press the Select soft key or
the
key.
3. Select the Memory status option by pressing the Up or
Down Navigation key and press the Select soft key or
the
key.
4. When you are finished, press the
key or the Back
soft key.
Section 6: Understanding Your Phonebook
67
68
Section 7: Messages
Topics Covered
• Voice Notes
• Text Messages
• Picture Messages
• Inbox
• Sentbox
• Outbox
• Drafts
• Templates
• Voice Mail
• Delete All
• Settings
• Broadcast Messages (SIM Dependent)
• Instant Messaging
• Memory Status
This section describes how to send or receive different
types of messages. It also includes the features and
functionality associated with messaging.
Section 7: Messages
69
Types of Messages
Your phone provides the following message types:
• Voice Notes
• Text Messages
• Picture Messages
• Voice Mail Messages
• Broadcast Messages (SIM Dependent)
• Instant Messaging
Voice Notes
In this menu, you can record a voice note of up to one
minute long and then immediately send it by a Picture
Messaging message.
Whenyouaccessthismenu,atimerappearsonthescreen.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Voice notes icon.
Press the Select soft key or the
key to enter the
menu.
3. Press the Record soft key to start recording.
4. Record a memo by speaking into the microphone.
The display shows both the elapsed time and the
remaining time.
5. When you are finished, press the Stop soft key. Or, when
the recording time is expired, the display switches to the
next screen.
6. Press the Options soft key for the following options:
70
Voice Notes
• Send to: allows you to send the Voice note.
• Play: plays back your Voice note.
• Re-record: discards the Voice note and enables you to
record another one.
• Set default destination: allows you to remove or edit the
default destination.
• Save: saves the Voice note.
7. To send the Voice note, press the Send soft key.
8. Highlight one the following options:
• Recent log: allows you to select a number or an address
from the 20 last destinations you entered for sending the last
messages.
• Phonebook: allows you to enter the phone number you want
from your phonebook. Use the
key to check the selected
entries.
• Phone number: allows you to enter a phone number.
• Email address: allows you to enter an email address to
send the voice note to.
• My Album: allows you to send the voice note to My Album.
• My Journal: allows you to send the voice note to My
Journal.
9. Press the Select soft key or the
key.
10. If you chose Recent log or Phonebook, use the
key
to place checkmarks next to the entry or entries you
want your message sent to and press the Next softkey.
11. If you chose Phone number, enter the number in the To
text box.
12. To add another destination, select Empty. Repeat from
step 8. You can enter up to 20 destinations.
Section 7: Messages
71
13. When you have finished entering the destinations, press
the Options soft key, highlight the Send option and press
the Select soft key or the
key.
Your phone sends the message. After sending, the
message is saved in the Sentbox.
Text Messages
Short Message Service (SMS) allows you to send and
receive short text messages to and from other mobile
phones. In addition, your phone supports the Enhanced
Messaging Service (EMS), which enables you to include
simple pictures, melodies, and animated images in your
messages. To use this feature, you must subscribe to your
service provider’s message service.
When the Message icon ( ) appears, you have received
newtextmessages.Whenthememoryisfull,themessage
icon( )willflashonyourphoneandyoucannotreceive
anynewmessages.Youmustdeleteamessagebeforeyou
can receive additional messages.
Use the Delete option in each message box to delete
obsolete messages.
Create new
In this menu, you can write and send a text message.
Creating a Simple Text Message
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
72
Text Messages
3. Highlight the Create new option and press the Select
soft key or the key.
4. Highlight the Text message option and press the Select
soft key or the key.
5. Create your message.
Notes: For further details about entering characters, see "Using ABC
Mode" on page 47.
You can enter up to 160 standard Alphabet characters per page in your
message. The message can be up to 12 pages long for a total of 1920
characters.
6. When you finish entering your message, press the
Options soft key. The following options are available:
• Send: allows you to send the message.
• Insert from: allows you to insert Text template, Phonebook,
or Favorites. The Text template allows you to apply one of the
preset message templates to the text. Select one of the 10
items stored in the Text messages template menu. Phonebook
allows you to add names and phone numbers to your
message. Favorites allows you to add internet addresses to
your message.
• Add content: allows you to add a picture, animation, or
melody to your message.
• Attach: allows you to attach Name card, Schedule,
Anniversary, Miscellaneous, or To do items to your message.
• Save to Drafts: save the message to your Phone or SIM.
• Language select: allows you to set the language to
English, French, or Spanish.
• Text style: allows you to format the style of the text.
For the Text size, Large, Medium, and Small size are available.
Text mode options are Normal, Underline, and Strikethrough.
Section 7: Messages
73
The options for Bold and Italic are set by using the
key to
place a checkmark by them. Alignment options are Left,
Center, and Right.
• Back: allows you save to your draft folder without sending.
7. Highlight the Send option and press the Select soft key
or the
8. Highlight one of the following options and press the
Select soft key or the key:
key.
• Recent log: allows you to select from recipients of your
previous messages.
• Phonebook: allows you to select the phone number(s) you
want from your phonebook.
• Phone number: allows you to enter a number to send your
message to.
9. If you chose Recent log or Phonebook, use the
key
to place checkmarks next to the entry or entries you
want your message sent to and press the Next softkey.
10. If you chose Phone number, enter the number in the To
text box.
11. To add another destination, select an Empty option and
press the Options soft key. Repeat from step 6. You can
enter up to 20 destinations.
12. When you have finished entering the destinations, press
the Options soft key, highlight the Send option and press
the Select soft key or the
key.
74
Picture Messages
Picture Messages
This menu allows you to use the Multimedia Message
Service.
Picture Messaging is a messaging service that provides
deliveryofpersonalmultimediamessagesfromphoneto
phone or from phone to e-mail.
In addition to the familiar text content of text messages,
multimedia messages can contain images, graphics,
voice, and audio clips. A Picture Messaging message is a
multimedia presentation in a single file. It is not a text file
with attachments.
Using the Picture Messaging feature, your phone can
receive and send messages that contain multimedia files,
such as photos, videos, sounds and images you
downloaded from the Internet and voice notes you
recorded. This function is available only if it is supported
by your service provider. Only phones that offer
multimedia messaging features can receive and display
multimedia messages.
Create new
This menu allows you to create a new multimedia
message and send to one or multiple destinations.
Creating and Sending a Multimedia Message
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
Section 7: Messages
75
3. Highlight the Create new option and press the Select
soft key or the key.
4. Highlight the Picture message option and press the
Select soft key or the key.
5. Highlight Subject and press the
key.
6. Enter the subject of your message and press the
key.
Note: For more information about entering characters, see "Using ABC
Mode" on page 47.
7. To add a picture or video clip, highlight the Image &
Video option and press the
8. Highlight one of the following options and press the
Select soft key or the key.
key.
• Pictures: allows you to take a picture to include, or select a
picture from your different picture folders.
• Videos: allows you to record a video to include, or select a
video from your different video folders.
9. Select a picture or video from the various options
available.
10. Highlight the picture or video and press the Options soft
key. Highlight the Add option and press the Select soft
key or the
key to add it to your message.
11. To add a sound, highlight the Sound option and press the
key.
Note: if you attached a video clip to your message, you will not be able to
add audio to the message.
76
Picture Messages
12. Highlight one of the following options and press the
Select soft key or the key.
• Record audio: allows you to record a new audio message.
• My sounds: allows you to select a sound from your My
sounds folder.
• Voice list: takes you to the Voice list folder to select a voice
message to add.
13. Select a Sound or Voice memo and press
key. Press
the Add soft key to add the sound to your message.
14. To add a message, highlight Message and press the
key.
15. Enter your message and press the
key.
16. When you have finished creating the message, press the
Options key and highlight the Send option. Press the
Select soft key or the
key.
17. Highlight one of the following options:
• Recent log: allows you to select from recipients of your
previous messages.
• Phonebook: allows you to enter the phone number you want
from your phonebook.
• Phone number: allows you to enter a phone number.
• Email address: allows you to enter an email address.
• My Album: allows you to send the message to the My
Album.
• My Journal: allows you to send the message to My Journal.
Section 7: Messages
77
18. After selecting where to send your message, press the
Options softkey and highlight the Send option. Press the
Select soft key or the
key. Your phone sends the
message.
Inbox
The Inbox stores messages that you have received. You
can tell what kind of message it is by the icon displayed.
If the icon envelope is open then the message has been
read, otherwise it will appear closed.
The following types of messages may appear in your
inbox:
Voice notes
Text messages
Multimedia messages
Push messages
When you enter the Inbox, the list of messages displays
with the sender’s phone numbers, or names, if available
in your Phonebook. After you have read themessage, the
envelope in the icon will appear opened.
Note: By pressing the Left or Right Navigation keys, you may scroll
between Inbox, Sentbox, Outbox, and Drafts.
1. In Idle mode, press the Menu soft key to access Menu
mode.
78
Inbox
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Inbox option and press the Select soft key
or the key.
Viewing a Text Message in Inbox
1. Select a text message from the list and press the
Options soft key.
The following options will appear:
• View: read the text message.
• Reply via: allows you to send a reply to the sender by
sending a text or picture message.
• Call back: places a call to the selected number.
• Delete: deletes the selected text message or all messages.
• Move to phone: allows you to move the message from the
SIM card to the phone’s memory. This option is only available
for messages stored in the SIM card.
• Move to SIM card: allows you to move the message from
the phone’s memory to the SIM card. This option is only
available for messages stored in the phone’s memory.
• Sort by: allows you to sort messages by Read/Unread, Date,
Name, Type, Size, or Subject.
2. Highlight the View option and press the Select soft key
or the
key to read the message contents.
3. To scroll through the contents, press the Up or Down
Navigation key.
While reading a text message, you may choose the
following options by pressing the Options soft key:
Section 7: Messages
79
• Reply via: allows you to send a reply to the sender by sending a
text or picture message.
• Call back: places a call to the selected number.
• Forward: allows you to forward the message to another
number.
• Delete: allows you to delete the message.
• Move to phone: allows you to move the message from the SIM
card to the phone’s memory. This option is only available for
messages stored in the SIM card.
• Move to SIM card: allows you to move the message from the
phone’s memory to the SIM card. This option is only available
for messages stored in the phone’s memory.
• Save address: allows you to extract the sender’s number and
URL, email addresses or phone numbers from the message
text, so that you can save them in your phone’s memory.
• Protection: allows you to lock the message to protect it from
being deleted.
Viewing a Picture Message in Inbox
1. Highlight a picture message from the list and press the
Options soft key.
The following options will appear:
• View: read the picture message.
• Reply via: allows you to send a reply to the sender by
sending a picture message, text message, or voice note.
• Reply all via: allows you to send a reply to All by sending a
picture message or voice note.
• Call back: places a call to the selected number.
• Forward: allows you to forward the message to another
number.
80
Inbox
• Delete: deletes the selected picture message or all
messages.
• Sort by: allows you to sort messages by Read/Unread, Date,
Name, Type, Size, or Subject.
• Protection: allows you to lock the message to protect it from
being deleted.
• Properties: shows you information about the message, such
as time and date the message was received, the sender’s e-
mail address or phone number, recipient’s e-mail address or
phone number, Cc, message size, priority, and class.
2. Highlight the View option and press the Select soft key
or the
key to read the message contents.
3. To scroll through the contents, press the Up or Down
Navigation key.
While viewing a picture message, you may choose the
following options by pressing the Options soft key:
• Reply via: allows you to send a reply to the sender by sending a
text or picture message or a voice note.
• Reply all via: allows you to send a reply to All by sending a
picture message or voice note.
• Call back: places a call to the selected number.
• Forward: allows you to forward the message to another
number.
• Replay: allows you to view the message again.
• Delete: allows you to delete the message.
• Save address: allows you to extract the sender’s number and
URL, e-mail addresses or phone numbers from the message
text, so that you can save them in your phone’s memory.
Section 7: Messages
81
• Save media: allows you to save the message to different areas
or to your vCard or vCalendar.
• Protection: allows you to lock the message to protect it from
being deleted.
• Properties: shows you information about the message, such as
time and date the message was received, the sender’s e-mail
address or phone number, recipient’s e-mail address or phone
number, Cc, message size, priority, and class.
Viewing a Voice Note in Inbox
1. Highlight a Voice Note from the list and press the
Options soft key.
The following options will appear:
• View: listen to the Voice note and view message details.
• Reply via: allows you to send a reply to the sender by
sending a picture message, text message, or voice note.
• Reply all via: allows you to send a reply to All by sending a
picture message or voice note.
• Call back: places a call to the selected number.
• Forward: allows you to forward the Voice note to another
number.
• Delete: allows you to delete the selected Voice note or all
messages.
• Sort by: allows you to sort messages by Read/Unread, Date,
Name, Type, Size, or Subject.
• Protection: allows you to lock the Voice note to protect it
from being deleted.
• Properties: shows you information about the Voice note,
such as time and date the Voice note was received, the
sender’s e-mail address or phone number, recipient’s e-mail
address or phone number, Cc, Voice note size, priority, and
class.
82
Inbox
2. Highlight the View option and press the Select soft key
or the key to listen to the message contents.
While listening to the message, you may choose the
following options by pressing the Options soft key:
• Reply via: allows you to send a reply to the sender by sending a
text or picture message or a voice note.
• Reply all via: allows you to send a reply to All by sending a
picture message or voice note.
• Call back: places a call to the selected number.
• Forward: allows you to forward the message to another
number.
• Replay: allows you to listen to the voice note again.
• Delete: allows you to delete the voice note.
• Save address: allows you to extract the sender’s number and
URL, e-mail addresses or phone numbers from the message
text, so that you can save them in your phone’s memory.
• Save media: allows you to save the message to different areas
or to your vCard or vCalendar.
• Protection: allows you to lock the message to protect it from
being deleted.
• Properties: shows you information about the message, such as
time and date the message was received, the sender’s e-mail
address or phone number, recipient’s e-mail address or phone
number, Cc, message size, priority, and class.
Viewing a Push Message in Inbox
A Push message is a way of delivering content (e.g.
images, ringtones, etc.) to mobile phones that are WAP
enabled.WithaPushmessageyoudon'tactuallysendthe
content in the text message, you direct the mobile phone
where to get it from.
Section 7: Messages
83
1. Select a Push message from the list and press the
Options soft key.
The following options will appear:
• View: listen to the Voice note and view message details.
• Delete: allows you to delete the selected message or all
messages.
• Sort by: allows you to sort messages by Read/Unread, Date,
Name, Type, Size, or Subject.
2. Highlight the View option and press the Select soft key
or the
key to listen to the message contents.
While reading the message, you may choose the
following options by pressing the Options soft key:
• Go to URL: allows you to go to the website on your WAP
browser.
• Delete: allows you to delete the message.
• Save address: allows you to extract the sender’s number and
URL, e-mail addresses or phone numbers from the message
text, so that you can save them in your phone’s memory.
Viewing a Message When You Receive It
When a new multimedia message comes in, the display
shows the Picture Messaging Message icon.
1. Press the View soft key to view the message.
Press the Exit soft key if you want to view the message
later in the Inbox.
2. Press the Options soft key or the
key to access the
key.
various options described above.
3. When you are finished, press the
84
Sentbox
Sentbox
This message box stores messages that you have sent.
When you enter this menu, the list of messages in the box
displays with the recipients’ phone numbers or names, if
available in your Phonebook.
Note: By pressing the Left or Right Navigation keys, you may scroll
between Inbox, Sentbox, Outbox, and Drafts.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Sentbox option and press the Select soft
key or the key.
4. Select a message from the list and press the Options
soft key.
5. Highlight the View option and press the Select soft key
or the
key to view the message contents.
6. To scroll through the contents, press the Up or Down
Navigation key.
While reading a message, you can choose different
options by pressing the Options soft key.
Section 7: Messages
85
Outbox
This message box stores messages that you have
attempted to send but have not actually been sent yet.
When you enter this menu, the list of messages in the box
displays with the recipients’ phone numbers or names, if
available in your Phonebook.
Note: By pressing the Left or Right Navigation keys, you may scroll
between Inbox, Sentbox, Outbox, and Drafts.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Outbox option and press the Select soft
key or the key.
4. Select a message from the list and press the Options
soft key.
5. Highlight the View option and press the Select soft key
or the
key to view the message contents.
6. To scroll through the contents, press the Up or Down
Navigation key.
While reading a message, you can choose different
options by pressing the Options soft key.
86
Drafts
Drafts
This message box stores messages that you may want to
edit or send at a later time.
When you enter this menu, the list of messages in the box
displays.
Note: By pressing the Left or Right Navigation keys, you may scroll
between Inbox, Sentbox, Outbox, and Drafts.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Drafts option and press the Select soft key
or the key.
4. Select a message from the list and press the Options
soft key.
5. Highlight the Edit option and press the Select soft key or
the
key to edit the message contents.
6. To send the message, press the Options soft key and
highlight the Send option.
7. Press the Select soft key or the
key to send the
message.
While viewing a draft message, you can choose different
options, depending on the type of message, by pressing
the Options soft key.
Section 7: Messages
87
Templates
Besidesenteringmessagetextusingthekeypadkeys,you
can speed message composition by including copies of
stored text (Templates) in your message.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Templates option and press the Select soft
key or the key.
4. If you want templates for a text message, highlight the
Text template option and press the Select soft key or
the
key.
You can choose from ten predefined sentences that you
can add to your text message to save time.
5. If you want templates for a picture message, highlight
the Picture messages template option and press the
Select soft key or the
key.
You can choose between twelve different picture
message formats. You can then edit the parts that you
choose.
Voice Mail
This menu provides you with a way of accessing your
voice mailbox, if provided by your network.
1. In Idle mode, press the Menu soft key to access Menu
mode.
88
Delete All
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Voice mail option and press the Select soft
key or the key.
The following options are available:
• Call voice mail: before using the Voice Mail feature, you must
enter the voice server number obtained from your service
provider. You can then select this option and press the Select
soft key or the
key to listen to your messages. You can also
connect to the voice server by pressing and holding the
key in Idle mode.
• Voice server number: allows you to change the voice mail
server number, if necessary.
Note: Voice mail is a network feature. Please contact your service provider
for further details.
Delete All
Thismenuallowsyoutodeleteallofthemessagesineach
message box. Or, you can also delete all of your messages
in all message boxes at one time.
1. To select a message box to clear, press the Up or Down
Navigation key to highlight the message box you want to
delete. Press the
key to place a check mark. To
delete all of your messages, select the All messages
option.
2. To remove a check mark, press the
key.
3. Press the Delete soft key to delete the marked objects.
Section 7: Messages
89
4. After you receive the Delete? confirmation, press the
Yes soft key to delete the selected message box
contents. Otherwise, press the No soft key.
Settings
In this menu, you can set up default text and picture
message information. The last setting you accessed is
automatically activated for sending subsequent
messages.
Text message
• Service center: allows you to store or change the number of
your message center, which is required when sending
messages. You must obtain this number from your service
provider.
• Destination address: allows you to enter a number that you
would like to send all messages to. You can still message
others, but this number will always appear in the Send list.
• Validity period: allows you to set the length of time your text
messages are stored at the message center while attempts are
made to deliver them.
• Reply path: allows the recipient of your message to send you a
reply message using your message center, if your network
supports this service.
• Delivery report: allows you to activate or deactivate the report
function. When this function is activated, the network informs
you whether or not your message has been delivered.
Picture message
The following options are used to set Send and Receive
settings for Picture messages.
90
Broadcast Messages (SIM Dependent)
Send Settings
• Delivery report: when this option is enabled, the network
informs you whether or not your message has been delivered.
• Read reply: when this option is enabled, your phone sends a
request for a reply along with your message to the recipient.
• Priority: you can select the priority level of your messages.
• Expiry date: The expiration date is how long the message
receiver has to retrieve the message.
• Delivery after: you can set a delay time before the phone sends
your messages.
Receive Settings
• Anonymous reject: you can set your phone to automatically
reject anonymous messages.
• Ads allowed: allows you to receive advertisements.
• Report allowed: you can set the option to receive a delivery
report.
Broadcast Messages (SIM Dependent)
This network service allows you to receive text messages
on various topics, such as the weather or traffic.
Please contact your service provider for further details.
Instant Messaging
Instant Messaging (IM) is a way of sending short, simple
messages that are delivered immediately to users online
at that moment.
Before using this feature, you need to subscribe to a
messenger service. For further details, contact your
service provider.
Section 7: Messages
91
Starting your Instant Messaging
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the IM icon. Press
the Select soft key or the
key to enter the menu.
3. Highlight the messenger service to which you subscribed
using the Up or Down Navigation key and press the
Select soft key or the
key.
4. Highlight the Sign on, Connect, or Sign in option,
depending on your messenger service and press the
Select soft key or the
key.
5. Enter the required sign on information such as ID and
password and press the OK soft key.
Note: The information required for sign on will vary depending on the
instant messaging provider you are using.
6. Follow the on-screen instructions to read, reply to,
compose, send, and manage your IM account.
Memory Status
You can check the amount of the memory being used and
the memory remaining for text, picture, and push
messages.
The display shows the total space including the used and
freespace.Youcanalsoviewhowmuchspaceiscurrently
occupied by each message box.
92
Section 8: Changing Your Settings
Topics Covered
• Time & Date Settings
• Phone Settings
• Display Settings
• Sound Settings
• Network Services Settings
• Security Settings
• Memory Status
• Reset Settings
This section explains the sound and phone settings for
yourphone.Itincludesdisplaysettings,securitysettings,
and extra settings associated with your phone.
Section 8: Changing Your Settings
93
Time & Date Settings
Thismenuallowsyoutochangethecurrenttimeanddate
displayed.
The following options are available:
• Set time: allows you to change the hour and minute.
• AM/PM: allows you to set either AM or PM.
• Time format: allows you to select whether your time is
displayed in 12 hour or 24 hour format.
• Set date: allows you to enter the month, day, and year.
• Date format: allows you to select MM/DD/YYYY, DD/MM/YYYY,
or YYYY/MM/DD format.
• Week start day: allows you to choose between Sunday or
Monday as the day your week will start.
• Auto update: allows you to receive time information from your
service provider’s network.
• On: the phone automatically updates the time and date
according to the current time zone using the network
service.
• Confirm first: the phone asks for a confirmation before the
update.
• Off: you need to manually set the time and date according to
the current time zone using the Set time menu.
To change your time and date settings:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Settings icon.
Press the Select soft key or the
key to enter the
menu.
94
Phone Settings
3. Highlight the Time & Date options and press the Select
soft key or the
key.
4. Use the Up or Down Navigation key to select the option
you wish to change.
5. To set Set time or Set date, use the Left or Right key to
position the cursor over the number you wish to change.
6. Enter the desired number.
7. To change other options, use the Left or Right key to
select the desired setting.
8. When you are finished changing your settings, press the
Save soft key to save your settings. Otherwise press the
Cancel soft key.
Note: Automatic updates of time and date do not change the time you have
set for alarm settings or calendar memos.
Phone Settings
You can customize various phone settings.
Language
ThismenuallowsyoutoselectadisplaylanguageforText
language and Input mode. Choose from English, French,
and Spanish.
Greeting message
This menu allows you to set a greeting to be displayed
briefly when the phone is switched on.
For details about entering characters, see "Using ABC
Mode" on page 47.
Section 8: Changing Your Settings
95
Slide settings
Thismenuallowsyoutosethowyourphonewillfunction
whenyouslideyourphoneopenorclosed.Thefollowing
options are available:
• Up: select Accept call if you want the call to be answered when
you slide your phone open. Otherwise, select None.
• Down: select Stop operation if you want the call to be
discontinued when you slide your phone closed. Otherwise,
select Continue operation.
Extra settings
You can turn the automatic redialing or answering
features on or off.
1. To turn a feature on, highlight the feature and press the
key. A check mark displays in front of the option.
2. To turn a feature off, highlight the checked feature and
press the
key. The check mark no longer displays.
The following options are available:
• Auto redial: when this option is checked, the phone makes up
to ten attempts to redial a phone number after an unsuccessful
call.
Note: The interval between call attempts varies.
• Anykey answer: when this option is checked, you can answer
an incoming call by pressing any key, except the key or the
Reject soft key. To reject the call, press the key or the
Reject soft key. When this option is unchecked, you must press
the
key or Accept soft key to answer a call.
96
Display Settings
3. When you have finished changing your settings, press
the Save soft key to save your settings. Otherwise press
the Cancel soft key.
Display Settings
In this menu, you can change various settings for the
display or backlight.
Wallpaper
Thismenuallowsyoutochangethebackgroundimageor
the color of the text to be displayed in Idle mode.
The following options are available:
• Get more wallpaper: this option takes you to t-zones where
you can download wallpapers.
• Default wallpapers: allows you to choose from a list of
wallpapers included with your phone.
• My photos: allows you to choose a photo from My photos
folder.
• My downloads: allows you to choose a photo from your
downloaded images folder.
To change the background image:
1. Scroll through the list by pressing the Navigation keys.
2. When the image you want highlights, press the Save soft
key if selecting from Default wallpapers. Otherwise,
press the Options soft key. Highlight the Save option and
press the Select soft key or the
key.
Section 8: Changing Your Settings
97
Interior display
Youcanselectthecolorofthemenusdisplayed. Thereare
two different patterns to choose from.
Brightness control
You can adjust the display brightness to see it better in
different lighting conditions.
Press the Left or Right Navigation key or press the
Volume keys to adjust the brightness. Press the Save soft
key when you are finished.
Backlight
In this menu, you can select the length of time that the
keypad backlight is on and how much longer the display
is illuminated before going off.
TheOnsettingishowlongthekeypadbacklightison.You
can select 15 seconds, 30 seconds, 1 minute, 3 minutes, or
10 minutes.
The Dim option is how much longer after the keypad
backlight goes off that the display remains lit. You can
select Off, 5 seconds, 15 seconds, 30 seconds, 1 minute or
3 minutes.
For example, if you set On for 30 seconds and Dim for 5
seconds, after30secondsthebacklightonthekeyswould
turn off and 5 seconds later the display light would turn
off.
Press the Left or Right Navigation key to adjust the
settings.
98
Display Settings
Dialing display
This menu allows you to select the size and color of your
dialing font. You can also set your background color.
To change the size of the font:
1. Highlight the Font size option and press the Select soft
key or the
key.
2. Use the Left or Right key to select between Large,
Medium, or Small.
3. Press the Save soft key or the
change. Otherwise, press the Cancel soft key.
To change the color of the font:
1. Highlight the Font color option and press the Select soft
key or the key.
key to save your
2. Use the Left or Right key to select either Basic (black),
Rainbow, Monochrome, or Gradation.
3. If you select Monochrome or Gradation, use the Down
key to highlight the color selections, then use the Left or
Right key to select between 10 different colors.
4. Press the Save soft key or the
change. Otherwise, press the Cancel soft key.
To change the background color:
1. Highlight the Background color option and press the
Select soft key or the key.
key to save your
2. Use the Left or Right key to select between 10 different
colors or None.
3. Press the Save soft key or the
key to save your
change. Otherwise, press the Cancel soft key.
Section 8: Changing Your Settings
99
Calendar
Thismenuallowsyoutosetacalendartodisplayoverthe
top of your wallpaper in Idle mode. Choose between On
or Off. The Calendar is set to Off by default.
Show caller information
By turning this option on, when you miss a call, caller
information such as name will be displayed on your
display when your missed calls are listed.
Sound Settings
Youcancustomizevarioussoundsettingsforyourphone.
Incoming call
Get more mega tones
UsingtheGetmoremegatonesoption,youcanaccessthe
web site preset by T-Mobile and download new sounds.
Get More HiFi Ringers
Using the Get More HiFi Ringers option, you can access
the web site preset by T-Mobile and download new HiFi
Ringers.
Ring tone
This menu allows you to select a ring melody. Highlight
Ring tone and press the key. Use the Up or Down key
to highlight a ring tone. Press the Select soft key or press
the
key.
Volume
This menu allows you to adjust the ring volume to one of
5 levels.
100
Sound Settings
Use the Right or Left key to increase or decrease the
volume.
Alert type
This menu allows you to specify how you are to be
informed of incoming calls. Use the Right or Left key to
select a ring tone.
The following options are available:
• Melody: the phone rings using the ring melody selected in the
Ringtone menu.
• Vibration: the phone vibrates but does not ring.
• Vibration then melody: the phone vibrates 3 times and then
starts ringing.
Keypad tone
This menu allows you to select the key tone and volume
that the phone sounds when you press a key.
Use the Right or Left key to make your selections.
To turn off the sound, select Off.
Message tone
This menu allows you to set up the ringer for incoming
messagesandemail. YoucansettheTone, Alerttype, and
Repetition.
Use the Right or Left key to make your selections.
Power on/off
Thismenuallowsyoutoselectthemelodythatthephone
sounds when it is switched on and off. You can choose
between 2 tones.
Section 8: Changing Your Settings
101
To turn off the sound, select Off.
Slide tone
Thismenuallowsyoutoselectthemelodythatthephone
soundswhenyouslideopenorcloseyourphone.Youcan
choose between 4 tones.
To turn off the sound, select Off.
Silent mode
Thismenuallowsyoutoselectwhetherornotyourphone
willvibratewhileinquietmode.Youmaychoosebetween
Vibration and Mute.
Extra tones
You can customize additional tones for the phone.
1. To turn a given tone on, press the
key. A check mark
displays in front of the option.
2. To turn a given tone off, press the
key. The check
mark no longer displays in front of the option.
The following options are available:
• Indicative tones: generates a tone whenever a pop-up window
appears on the screen.
• Minute minder: sets whether or not the phone beeps every
minute during an outgoing call to keep you informed of the
length of your call.
• Connection tone: sets whether or not the phone beeps when
your call is connected to the system.
• Alerts on call: sets whether or not you receive tones when a
message arrives while you are on a call.
102
Network Services Settings
Network Services Settings
Call forwarding
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to forward your business calls to a colleague
while you are on holiday.
To set your call forwarding options:
1. Select a call forwarding option by pressing the Up or
Down Navigation key and then press the Select soft key
or the
key.
The following options are available:
• Forward always: all calls are forwarded.
• Busy: calls are forwarded when your phone is busy.
• No reply: calls are forwarded when your phone is not
answered.
• Unreachable: calls are forwarded when you are not in an
area covered by your service provider or when your phone is
switched off.
• Cancel all: all call forwarding options are canceled.
2. Select the type of calls, Voice calls or Data calls, by
pressing the Up or Down Navigation key, and then press
the Select soft key or the
key.
The current status displays. If the option has already
been set, the number to which the calls are forwarded
displays.
3. To activate call forwarding, select IP Activated by using
the Left or Right key.
Section 8: Changing Your Settings
103
4. To deactivate call forwarding, select Deactivate by using
the Left or Right key.
5. Enter the number to which the calls are to be forwarded
in the Forward to text box and press the Select soft key
or the
key.
To enter an international code, press and hold the
key until the + sign displays.
6. When you select Unreachable in step 1, select the
length of time the network waits for before forwarding a
call.
The phone sends your settings to the network and the
network’s acknowledgement displays.
Call barring (SIM Dependent)
Call Barring allows you to restrict specific types of
incomingandoutgoingcallsforyourphone.Thisisuseful
ifyouallowsomeonetouseyourphoneforashortperiod
of time.
Call waiting
Thisnetworkserviceinformsyouwhensomeoneistrying
to reach you during another call.
You can specify individual call waiting options for voice
calls and/or data calls.
To set your call waiting options:
1. Select the type of calls, Voice calls or Data calls, to
which the call waiting option is to be applied by pressing
the Up or Down Navigation key and then press the
Select soft key or the
key.
104
Network Services Settings
The screen informs you whether call waiting is activated
or deactivated.
2. Highlight IP Activated or Deactivate and press the
Select soft key or the
key.
3. Call waiting will then be activated or deactivated.
4. Select the Cancel all option to deactivate Call waiting
on all voice and data calls.
Network selection
The Network Selection feature enables you to
automatically or manually select the network used when
roaming outside of your home area.
Note: You can select a network other than your home network only if there
is a valid roaming agreement between the two.
To change Network Selection mode:
1. Highlight the Search now option and press the Select
soft key or the
key.
2. Press the Up or Down Navigation key until the network
you want highlights and then press the Select soft key or
the
key.
The phone will scan for that network and you will be
connected.
To change you Default setup:
1. Highlight the Default setup option and press the Select
soft key or the key.
2. Highlight either the Automatic or Manual option and
press the Select soft key or the key.
Section 8: Changing Your Settings
105
If you select Automatic, you are connected to the first
available network when roaming.
3. If you select Manual, press the Up or Down Navigation
key until the network you want highlights and then press
the Select soft key or the
key.
The phone will scan for that network and you will be
connected.
Caller ID
You can prevent your phone number from being
displayed on the phone of the person being called.
Note: Some networks do not allow you to change this setting.
The following options are available:
• Default: the default setting provided by the network is used.
• Hide number: your number does not display on the other
person’s phone.
• Send number: your number is sent each time you make a call.
Security Settings
TheSecurityfeatureenablesyoutorestricttheuseofyour
phone by others and to restrict the types of calls.
Various codes and passwords are used to protect the
features of your phone.
PIN check
When the PIN Check feature is enabled, you must enter
your PIN each time you switch on the phone.
106
Security Settings
Consequently, any person who does not have your PIN
cannot use your phone without your approval.
Note: Before enabling or disabling the PIN Check feature, you must enter
your PIN.
The following options are available:
• Disable: the phone connects directly to the network when you
switch it on.
• Enable: you must enter the PIN each time the phone is
switched on.
Change PIN
This feature allows you to change your current PIN,
provided that the PIN check feature is enabled. You must
enter the current PIN before you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone lock
When the Phone lock feature is enabled, the phone is
locked and you must enter the 4- to 8-digit phone
password each time the phone is switched on.
The password is preset to “00000000” at the factory. To
change the phone password, see "Change password" on
Once the correct password has been entered, you can use
the phone until you switch it off.
The following options are available:
• Disable: you are not asked to enter the phone password when
you switch on the phone.
Section 8: Changing Your Settings
107
• Enable: you are required to enter the phone password when
you switch on the phone.
Change password
The Change password feature allows you to change your
currentphonepasswordtoanewone. Youmustenterthe
current password before you can specify a new one.
The password is preset to “00000000” at the factory. Once
you have entered a new password, you are asked to
confirm it by entering it again.
Privacy
Using this menu, you can lock your media contents, such
as picture messages, Voice messages, Voice memos,
images, sounds, and videos. Once you have locked the
contents, you must enter the phone’s password to access
the associated menus.
1. To select an item to lock, press the Up or Down
Navigation key. To lock all of the contents, select Phone
privacy.
2. To place a check mark, press the
key.
key.
3. To remove a check mark, press the
4. To lock the marked items, press the Save soft key.
5. Enter a password and press the OK soft key or the
key.
Note:Thepasswordispresetto“00000000”atthefactory.
108
Memory Status
FDN mode
FDN (Fixed Dial Number) mode, if supported by your
SIM card, allows you to restrict your outgoing calls to a
limited set of phone numbers.
The following options are available:
• Disable: you can call any number.
• Enable: you can only call phone numbers stored in Phonebook.
You must enter your PIN2. You can obtain your PIN2 from your
service provider.
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the current
PIN2 before you can specify a new one. Once you have
entered a new PIN2, you are asked to confirm it by
entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display.
Memory Status
You can check the amount of the memory being used and
the memory remaining for Shared memory, Messages,
My files, Calendar, Phonebook, and Games.
The display shows the total space including the used and
freespace.Youcanalsoviewhowmuchspaceiscurrently
occupied by each message box.
You can also check how many names and numbers are
stored in Phonebook, in both SIM card and the phone
memory. You can also see the capacity of both memories.
Section 8: Changing Your Settings
109
InanyoftheMemorystatusmenus,youcanpresstheLeft
or Right navigation keys to scroll through different
categories.
Reset Settings
From this menu you can reset your phone and sound
settings to the default settings.
The following options are available:
• All: Phone, Display, Sound, and WLAN settings will be
returned to default values.
• Phone settings: only phone settings will be returned to
default values.
• Display settings: only display settings will be returned to
default values.
• Sound settings: only sound settings will be returned to
default values.
• WLAN settings: only WLAN settings will be returned to
default values.
To reset your settings:
1. Highlight one of the options and press the
key to
place a check mark next to the option.
2. Press the Reset soft key.
3. When you see the Reset settings? prompt, press the
Yes soft key.
4. Enter the 4- to 8-digit password and press the OK soft
key or the
message.
key. You will receive a Reset confirmation
The password is preset to “00000000.” To change this
110
My Files
My files allows you to manage your sounds, images,
videos and music in one convenient location.
Sounds
Inthismenu,youcanviewthelistofsoundsdownloaded
fromthe web serveror received in multimediamessages.
You can set a downloaded sound as the current ring tone.
The following options are available:
Get More MegaTones
UsingtheGetMoreMegaTonesoptiononthesoundslist,
you can access the web site preset by T-Mobile and
download new sounds.
Get More HiFi Ringers
Using the Get More HiFi Ringers option on the sounds
list, you can access the web site preset by T-Mobile and
download new HiFi Ringers.
My sounds
Highlight an item in the My sounds menu and press the
Options soft key or the key. The following options are
available:
• Download new: takes you to t-zones where you can download
new sounds.
• Play: plays the sound.
• Send via picture message: allows you to send the sound via
Picture message.
• Set as: allows you to set the sound as your Ringtone, a Caller
ringtone, or an Alarm tone.
112
My Files
• Delete: allows you to delete the sound or delete all sounds.
• Rename: allows you to change the name of the sound.
• Protection: allows you to lock the sound to protect it from
deletion.
• Properties: displays the sound name, date, format, length,
size, and protection.
Voice list
The Voice list contains your recorded audio messages.
Highlight an item in the Voice list menu and press the
Options soft key or the key. The following options are
available:
• Play: plays the audio message.
• Send via picture message: allows you to send the audio
message via Picture message.
• Set as: allows you to set the audio message as your ring tone,
caller ringtone or alarm tone.
• Delete: allows you to delete the audio message or delete all
audio messages.
• Rename: allows you to change the name of the audio message.
• Protection: allows you to lock the audio message to protect it
from deletion.
• Properties: displays the audio message name, date, format,
length, size, and protection.
Images
Inthismenu,youcanviewthelistofimagesdownloaded
from the web server or received in messages. You can set
a downloaded image as the current background image.
The following options are available:
Section 9: Fun & Apps
113
Get More Wallpapers
Using the Get More Wallpapers option, you can access
the web site preset by T-Mobile and download new
images.
My Album
Thismenuprovidestheabilityforyoutoviewthephotos
you have stored on the t-zone browser. Use the following
procedures to access My Album.
1. In your t-zone browser, select the My Albums Menu link
and press the Select soft key or the key.
2. Photos sent to this folder are stored in the Inbox Album.
Press the Select soft key to view the photos.
3. Press the
key to exit t-zones and return to the Idle
screen.
My Journal
This menu provides the ability for you to store your
photos using the t-zone browser.
My downloads
Thismenuallowsyoutoaccessyourdownloadedimages.
Scroll to the image you want to view. By pressing the
Options soft key you can access the following options:
• Download new: takes you to t-zones where you can download
new images.
• View: displays the image.
• Send via picture message: allows you to send the image via
Picture message.
114
My Files
• Set as: allows you to set the image as Wallpaper or as a Caller
ID.
• Delete: allows you to delete the selected image or multiple
images.
• Rename: allows you to change the name of the item.
• Display mode: allows you to see your images displayed in a
Line view or in Thumbnail view.
• Slide show: allows you to see all of your photos in a slide show
presentation.
• Protection: allows you to lock the image to protect it from
deletion.
• Properties: displays the image name, date, format, resolution,
size, quality, and protection.
My photos
In this menu you can review the photos you’ve taken.
Highlight a photo and press the Options soft key to
choose from the following options:
• View: displays the photo.
• Send to My Album: allows you to send the photo to My Album.
• Send: allows you to send the image via Picture message.
• Default destination: allows you to remove or replace the
default destination.
• Set as: allows you to set the photo as Wallpaper or as a Caller
ID.
• Edit image: takes you to the Image editor screen where you
can add emoticons or frames to your photos or apply special
effects.
• Delete: allows you to delete the selected photo or multiple
photos.
Section 9: Fun & Apps
115
• Rename: allows you to change the name of the photo.
• Display mode: allows you to see your images displayed in a
Line view or in Thumbnail view.
• Slide Show: allows you to see all of your photos in a slide show
presentation.
• Protection: allows you to lock the image to protect it from
deletion.
• Properties: displays the image name, date, format, resolution,
size, and protection.
Videos
In this menu, you can view a list of videos downloaded
fromthe web serveror received in multimediamessages.
The following options are available:
Downloaded videos
This menu allows you to access your downloaded video
clips.
Scroll to the video you want to view. By pressing the
Options soft key you can access the following options:
• Play: plays the video.
• Send via picture message: allows you to send the video via
Picture message.
• Set as caller ID: allows you to set the video as a Caller ID.
• Delete: allows you to delete the selected video or multiple
videos.
• Rename: allows you to change the name of the video.
• Display mode: allows you to see your videos displayed in a
Line view or in Thumbnail view.
116
My Files
• Protection: allows you to lock the video to protect it from
deletion.
• Properties: displays the video name, date, format, resolution,
size, length, quality, and protection.
My videos
In this menu you can review the photos you’ve taken.
Highlight a video and press the Options soft key to
choose from the following options:
• Play: plays the video.
• Send via picture message: allows you to send the video via
Picture message.
• Set as caller ID: allows you to set the video as a Caller ID.
• Delete: allows you to delete the video.
• Rename: allows you to change the name of the video.
• Display mode: allows you to see your videos displayed in a
Line view or in Thumbnail view.
• Protection: allows you to lock the video to protect it from
deletion.
• Properties: displays the video name, date, format, resolution,
size, length, quality, and protection.
Music
This option allows you to access your audio files in your
My Music folder. You can also access other audio files by
selecting the Sonic wellness option.
Memory Status
You can check the amount of memory being used and
memory remaining for images, videos, music, and
sounds. Press the Left or Right keys to scroll between the
Section 9: Fun & Apps
117
memory status of Fun & Apps, Sounds, Images, My ‘5’
icons, Videos, and Music.
Audio Player
TheAudioPlayercanbeusedtoplaymusicfilesyouhave
loaded from your PC.
Note: The following characters cannot be used in the filename:
/ \ * ? “ < > : |
The file name is limited to 47 total characters).
1. In the Fun & Apps menu, select Audio player and press
the Select soft key or the key.
2. Before you select an audio file, press the Options soft
key to select from the following options:
• Add music: allows you to add music from your Phone.
• Open: allows you to open My playlist or Current playlist.
• Settings: allows you to set these settings; Repeat mode,
Shuffle, Equalizer, 3D sound, Visualization, and Volume.
3. After you select an audio file, press the Options soft key
to select from the following options:
• Play: allows you to listen to the audio file from your phone.
• Open: allows you to open My playlist or Current playlist.
• Set as: allows you to set the audio file as an alarm tone. Audio
files with DRM (Digital Rights Management) can also be used
as a ringtone and a caller ringtone, while files without DRM can
only be used as an alarmtone.
• Remove from play list: removes the audio file from your
current playlist.
• Settings: allows you to set these settings; Repeat mode,
Shuffle, Equalizer, 3D sound, Visualization, and Volume.
118
Voice Recognition
• Properties: allows you to view the audio file name, date,
format, bitrate, length, size, and protection.
4. Highlight the Open option and press the Select soft key
or the
key.
5. Highlight the My playlist option and press the Select
soft key or the key.
6. Four playlists are shown, each holding up to 30 audio
files. Highlight a playlist and press the
7. Press the Up or Down navigation keys to highlight the
song you want to listen to and press to play it.
key.
8. While listening to an audio file, press the Options soft
key for the following options:
• Pause: allows you to pause the song you are listening to.
Press the
to resume the song.
• Open: allows you to open My playlist or Current playlist.
• Remove from play list: removes the audio file from your
current playlist.
• Settings: allows you to set these settings; Repeat mode,
Shuffle, Equalizer, 3D sound, Visualization, and Volume.
• Properties: allows you to view the audio file name, date,
format, bitrate, length, size, and protection.
Voice Recognition
VoiceSignal is advanced speech recognition software
that can be used to activate a wide-variety of functions
on your phone. VoiceSignal software automatically
voice activates all contacts for voice dialing and
searching, no pre-recording or training needed. Speak
phone numbers naturally to dial, and use voice
Section 9: Fun & Apps
119
commands to launch applicationsand navigate phone
menus.
VoiceSignal Options
The following is a list of functions that you can
performusingVoiceSignalspeechrecognitiononyour
phone.
• Call <Name or #>: dial by saying either a Name in your
Contacts list or a number
• Send Text<Name>: send a text message to a number or to
someone in your Contacts List.
• Lookup <Name>: open the contact record for any name in
your Contacts list.
• Go To <App>: open any application installed on your device.
• Check <Item>: provides details of your coverage, signal
strength, and battery level.
Call Digit Dialing
Digit Dial allows you to dial any phone number by
simply speaking the digits into the phone. No training
is necessary, and Digit Dial is programmed to
understand natural speech.
1. In Idle mode, press and hold the
key to launch
VoiceSignal.
2. After a brief pause, a list of optional commands appears
in the display and the audio prompt “Say a command”
plays through the earpiece.
3. To use Digit Dialing, say “Call” and the area code and
number that you want to dial at a distance of 3-12 inches
from the phone in a natural voice.
120
Voice Recognition
4. The number that you said is repeated through the
earpiece and your phone dials the number.
5. If VoiceSignal is not sure of the number that you said, a
list of possible matches appears in the display.
6. You’re asked to confirm the correct number as
VoiceSignal displays the results. Say “Yes” or “No” to
confirm or reject the number when prompted.
Call Name Dialing
To use Name Dial, you’ll need to have entries stored
in your Phonebook. See ‘Section 6: Understanding
Your Phonebook” on page 53 for information on
creating Phonebook entries.
1. In Idle mode, press and hold the
key to launch
VoiceSignal.
2. After a brief pause, a list of optional commands appears
in the display and the audio prompt “Say a command”
plays through the earpiece.
3. To use Name Dialing, say “Call” and the name of the
contact that you want to dial.
4. The name that you said is repeated through the earpiece
and your phone dials the number.
5. If VoiceSignal is not sure of the name that you said, a list
of possible matches appears in the display.
6. You’re asked to confirm the correct number as
VoiceSignal displays the results. Say “Yes” or “No” to
confirm or reject the number when prompted.
Section 9: Fun & Apps
121
7. The location is repeated through the earpiece and your
phone dials the number.
Send Text Message
1. In Idle mode, press and hold the
VoiceSignal.
key to launch
2. A list of commands appears in the display and the audio
prompt “Say a command” plays through the earpiece.
3. Say “Send Text” at a distance of 3-12 inches from the
microphone. “Say the Name or Number” plays through
the earpiece.
4. After you say a name or number, you might be prompted,
“Did you say?” To confirm a name or number, wait for
the beep and then say “Yes.”
5. You can also choose the correct name or number from
the choice list using the phone’s arrow keys.
6. The Text Message client is launched. Enter your text
message.
Name Lookup
To perform a name lookup, you’ll need to have some
entries in your Contacts list.
1. In Idle mode, press and hold the
key to launch
VoiceSignal.
2. A list of commands appears in the display and the audio
prompt “Say a command” plays through the earpiece.
3. Say “Lookup” at a distance of 3-12 inches from the
microphone. “Say the name” plays through the earpiece.
122
Voice Recognition
4. Say the name exactly as it is displayed in your Contacts
list, first name followed by last name.
5. The contact name appears in the display with other
information that you’ve entered for that contact.
Opening Applications
You can open an application or access a menu on your
phone using VoiceSignal.
1. In Idle mode, press and hold the
key to launch
VoiceSignal.
2. A list of commands appears in the display and the audio
prompt “Say a command” plays through the earpiece.
3. Say “Go To” at a distance of 3-12 inches from the
microphone. A list of options displays and a prompt of
“Please choose” plays through the earpiece. If the
option you desire is not listed, say “Next Menu” to scroll
to the next page.
4. The menu option spoken opens.
Checking Phone Status
Use the Check command to see and hear status
information from your phone, including its phone
number, status, current signal strength, network
coverage, and battery level.
To check phone status:
1. In Idle mode, press and hold the
key to launch
VoiceSignal.
2. A list of commands appears in the display and the audio
prompt “Say a command” plays through the earpiece.
Section 9: Fun & Apps
123
3. Say “Check” at a distance of 3-12 inches from the
microphone. A list of options displays and a prompt of
“Please choose” plays through the earpiece.
4. The phone status menu option spoken is displayed.
VoiceSignal Settings
You can adjust the settings and preferences for
VoiceSignal by opening the Voice Settings menu.
To access the VoiceSignal Settings menu, follow these
steps:
1. Press the Settings soft key.
2. Use the navigation keys to select the setting you want to
change.
The following options are available:
• Choice Lists: if VoiceSignal is not absolutely confident that it
has correctly identified a name or number, it can display a
choice list of up to three possibilities, and prompt you to
confirm the correct one. You can control when choice lists
appear by changing the Choice Lists setting to the following:
• Automatic: VoiceSignal displays a choice list when it is not
confident it has identified the correct choice from among
multiple alternatives.
• Always On: when there are multiple alternatives,
VoiceSignal always displays a choice list.
• Always Off: VoiceSignal never displays a choice list.
Instead, the application picks the best from among the
possible choices.
• Sensitivity: in VoiceSignal, sensitivity controls the balance
between rejecting too much, which means the phone
frequently does not recognize names, numbers, or commands,
and rejecting too little, which means it frequently recognizes
124
Voice Recognition
something even if nothing was said. When VoiceSignal rejects
an utterance, it displays a message such as “Please repeat…”
or “No match found.” If you frequently experience these
messages, you might be able to get better recognition by
adjusting the Sensitivity setting toward Reject Less. If you
frequently experience false activations (VoiceSignal detects a
wrong match), you might be able to get better performance by
adjusting the Sensitivity setting toward Reject More.
• Digit Dialing: use the Digit Dialing menu to adapt digit dialing
to your voice.
• Select Location: choose between North America or Other.
• Adapt Digits: lets you adapt digits, which can improve
voice recognition of phone numbers. Adaptation takes about
60 seconds.
• Reset Digits: erases any digit adaptation you have done
and resets digit recognition to the factory default. If you
have not adapted digits, this option is grayed out.
• Sound: you can customize the VoiceSignal user interface by
turning playback on or off for prompts, names, and numbers.
You can also change the speed and volume of name playback.
• Prompts: turns playback on or off for prompts such as
“Please say a command.”
• Digits: turns playback on or off for digits, for example, when
confirming a phone number.
• Names: turns playback on or off for names.
• Name Settings: adjusts the speed and volume of name
playback.
• Speakerphone: allows you to enable or disable the
speakerphone option when using VoiceSignal.
• About: displays information about VoiceSignal including version
number, build number, and device number.
Section 9: Fun & Apps
125
Games
YoucandownloadMIDlets(Javaapplicationsthatrunon
mobile phones) from various sources using t-zones and
store them in your phone.
When you access the Games menu, the list of default
games appears. Once you have downloaded games, they
are added to the list.
Note: Java services may not be available, depending on your service
provider.
Get more games
You can download more games from the web site preset
by your service provider using the Get more games
option.
Games List
1. Scroll to the MIDlet you want on the Games list and press
the
key.
2. The startup screen of the MIDlet will be displayed along
with game options. Use the Navigation keys to scroll
between options. Press the
key to make a selection.
Note: MIDlet game options will differ depending on the MIDlet you select.
Image Editor
Image Editor allows you to enhance your photos and
images by adding special effects, adjusting brightness,
contrastandcolor,rotatingorflipping,andaddingframes
or clip art.
126
Image Editor
To use the Image Editor, follow these steps:
1. In the Fun & Apps menu, select Image editor and press
the Select soft key or the key.
2. The message No image loaded will appear. Press the
Options soft key.
3. Select the New image option and press the Select soft
key or the
key.
4. To choose an image to edit, select either My photos or
Take Photo and press the Select soft key or the key.
5. After you have selected a photo or taken a new one,
press the Load soft key. You will be returned to the
Image editor screen.
6. Press the Options soft key for a list of options you can
use to edit your photo.
• Send: allows you to send your image in a picture message.
• New image: select another image from your My photos
folder or take another picture with your camera.
• Save: allows you to save your edited image.
• Effects: allows you to apply special effects to your image.
Choose between None, Black & White, Negative, Sepia, Blur,
Sharp, Sketch, Posterize, or Solarize.
• Adjust: allows you to adjust the brightness, contrast, and
color.
• Transform: allows you to rotate or flip your image.
• Insert: allows you to add a frame, emoticons, or clip art to
your image.
• Set as: allows you to set your edited image as Wallpaper or
Caller ID.
Section 9: Fun & Apps
127
• Undo: allows you to undo the last action you performed on
your edited image.
Organizer
The Organizer allows you to set alarms, schedule
appointments, view the calendar, create To-Do lists,
perform simple math calculations, check world time,
perform unit conversions, set a timer, and use a
stopwatch.
Alarm
This feature allows you to:
• set up to 3 alarms to ring at specified times.
• set the phone to switch on automatically and ring the alarm
even if the phone is switched off.
The following options are available:
• Wake-up call: the alarm rings to wake you up in the morning.
• Alarm1: set the day, time, and tone for this alarm.
• Alarm2: set the day, time, and tone for this alarm.
• Auto power: alarm rings at the specified time even if the phone
is turned off. If the option is set to Off and the phone is
switched off at the specified time, the alarm does not ring.
To set an alarm:
1. Highlight the alarm you would like to set and press the
Select soft key or the
key.
2. Highlight the Alarm option and press the Right key to set
Alarm to On.
3. Press the Down key to highlight the Alarm time option.
Enter the time you want the Alarm to sound.
128
Organizer
4. Press the Down key to highlight the AM/PM option.
Press the Left or Right key to set to AM or PM.
5. Press the Down key to highlight the Monday-Sunday
checkboxes. Press the
key to bring up a list of days.
6. Place a checkmark next to the days you want the alarm
to sound. To place or remove a check mark, press the
key. Press the OK soft key.
7. Press the Down key to highlight the Alarm tone option.
Press the
8. Press the Up or Down Navigation key to highlight an
alarm tone. Press the Select soft key or the key.
9. Press the Save soft key or the key.
10. Press the key to return to Idle mode.
key to bring up a list of alarm tones.
Note: Your phone is preset to a 12-hour format. To change the time
11. To stop the alarm when it rings, press any key.
Calendar
With the Calendar feature, you can:
• consult the calendar by month, week, or day.
• set schedules and note anniversaries
• make a To do list.
• write memos to keep track of your schedule.
• set an alarm to act as a reminder, if necessary.
• check your memory status.
Section 9: Fun & Apps
129
When you select the Calendar menu, the following
options are available:
Month view
When you select this option, the calendar displays the
selected month with today’s date highlighted.
At the bottom of the calendar, the following icons are
displayed along with the number of entries for each:
Schedule items
Anniversary events
To do items
Miscellaneous items
The number of entries next to each icon reflects the
number of entries for the selected day on the calendar.
The following options are available when you press the
Options soft key:
• View mode: allows you to select between Day view or Week
view of the selected day.
• Create: allows you to create a Schedule, Anniversary,
Miscellaneous, or To do event.
• Go to: allows you to see the Month view with today’s date
highlighted or a specified date.
• Delete: allows you to delete all events for a selected date, or
delete all events for preceding dates. You can also delete all
events.
Week view
When you select this option, the calendar displays the
selected week with today’s date and time highlighted.
130
Organizer
The following options are available when you press the
Options soft key:
• View mode: allows you to select between Day view or Month
view of the selected day.
• Create: allows you to create a Schedule, Anniversary,
Miscellaneous, or To do event.
• Go to: allows you to see the Week view with today’s date
highlighted or a specified date.
• Delete: allows you to delete all events for a selected date, or
delete all events for preceding dates. You can also delete all
events.
Day view
When you select this option, you are taken to the Day
view of the selected day with any events listed. The
following options are available when you press the
Options soft key:
• Create: allows you to create a Schedule, Anniversary,
Miscellaneous, or To do event.
• View mode: allows you to select between Month view or Week
view of the selected day.
While in Month view, Week view, or Day view, press the
Options soft key and select Create to see the following
options:
Schedule
This option allows you to write memos to a schedule.
1. From Month, Week, or Day View, press the Options soft
key. Highlight the Create option and press the Select
soft key or the
key.
Section 9: Fun & Apps
131
2. Highlight the Schedule option and press the Select soft
key or the key.
3. Enter the subject in the Subject text box then press the
Down soft key.
4. Continue to enter other information including Details,
Start date, Start time, AM/PM, End date, End time, AM/
PM, Location, Alarm, and Alarm tone. Check the Repeat
box using the
key if you want to repeat the alarm.
5. When you are finished, press the Save soft key.
Your information is saved to the Schedule.
Anniversary
This option allows you to record Anniversaries in your
calendar. You can also set an alarm to remind you of
important anniversaries.
1. From Month, Week, or Day View, press the Options soft
key. Highlight the Create option and press the Select
soft key or the
2. Highlight the Anniversary option and press the Select
soft key or the key.
key.
3. Enter the occasion in the Occasion text box then press
the Down soft key.
4. Continue to enter other information including Date,
Alarm, Alarm time, AM/PM, and Alarm tone. Check the
Repeat box using the
key if you want to repeat the
anniversary every year.
5. When you are finished, press the Save soft key.
Your Anniversary information is saved to the Calendar.
132
Organizer
Miscellaneous
This option allows you to record miscellaneous dates or
events in your calendar.
1. From Month, Week, or Day View, press the Options soft
key. Highlight the Create option and press the Select
soft key or the
2. Highlight the Miscellaneous option and press the Select
soft key or the key.
key.
3. Enter the subject in the Subject text box then press the
Down soft key.
4. Continue to enter other information including Details,
Start date, Start time, AM/PM, End date, End time, and
AM/PM. If you would like to set an alarm, check the
Alarm box and then enter the number of minutes before
the date or event that you want the alarm to sound.
Then select an Alarm tone.
5. When you are finished, press the Save soft key.
Your Miscellaneous information is saved to the Calendar.
To do
This feature allows you to enter a list of tasks to be done.
1. From Month, Week, or Day View, press the Options soft
key. Highlight the Create option and press the Select
soft key or the
2. Highlight the To do option and press the Select soft key
or the key.
key.
3. Enter the Item to be done in the To do text box then press
the Down soft key.
Section 9: Fun & Apps
133
4. Continue to enter other information including Start date,
Due date, and Priority.
5. When you are finished, press the Save soft key.
Your To do list is saved to the Calendar.
Editing the To do List
When you select Day view, the current contents display
with a status checkbox and a priority marker.
Iftheitemhasbeendone,acheckappearsinthecheckbox.
High priority items have a redexplanationmark,Normal
priority items have a blue explanation mark, and Low
priority items have a gray explanation mark.
1. To mark an item Done, highlight the item and press the
Options soft key.
2. Highlight the Done option and press the Select soft key
or the
key.
3. The status checkbox next to the To do item will be
checked.
4. To edit other fields in the To do item, highlight the item
and press the key.
5. Press the Options soft key.
6. Highlight the Edit option and press the Select soft key or
the
key.
7. Edit the items you wish to change.
8. Press the Save soft key or the key.
134
Organizer
Calculator
With this feature, you can use the phone as a calculator.
The calculator provides the basic arithmetic functions;
addition, subtraction, multiplication, and division.
1. Enter the first number using the numeric keys.
2. Enter the operation for your calculation by pressing the
following navigation keys:
• Left: subtraction (-)
• Right: addition (+)
• Up: multiplication (x)
• Down: division (÷)
3. The Left soft key can be used to insert a decimal point, a
left bracket, or a right bracket. Press it once for a decimal
point, twice for a left bracket, or three times for a right
bracket.
4. Enter the next number.
5. To view the result, press the
Repeat steps 1 to 5 as many times as required.
World Time
key.
This feature allows you to find out what time it is another
part of world, using the Left and Right Navigation keys.
There are two time lines available. You can set the first
setting to your home city and then use the second setting
to check other city times.
Press the Options soft key for the following options:
• Save: this allows you to save your world time settings.
Section 9: Fun & Apps
135
• Set daylight saving time: use the
key to place a
checkmark next to the cities that you want to set daylight
saving time. Each city listed represents a time zone.
Unit conversion
The conversion menu provides the following conversion
categories:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
To convert any of the above categories, do the following:
1. Scroll to the conversion feature you wish to use and
press the Select soft key or the key.
2. Enter the quantity you want converted in the text box.
Note: To include a decimal point, press the
key.
3. Use the Up, Down, Left, and Right keys to select the
“From” and “To” units of money or measure for the
quantity you want converted.
4. As you enter numbers in the first text box, the conversion
will be shown in the second text box.
Timer
You can use this menu to set a timer. To enable the Timer,
use the following options:
136
Organizer
1. Press the Set soft key to enter the length of time.
2. Enter the time and press the OK soft key.
3. Press the
key to start the timer. Press the
key
again to stop the timer.
Stopwatch
This feature allows you to use a stopwatch. Press the
key to start the stopwatch. Press the Reset soft key to
erase all stopwatch times recorded. Press the key for
the lap time. You can have up to 4 lap times.
Section 9: Fun & Apps
137
138
Section 10: Camera and Camcorder
Topics Covered
• Using the Camera and Camcorder
• Take and Send
• Record Video
• My Photos
• My Videos
• My Album
• My Journal
This section explains how to use the camera and
camcorderonyourphone.Youcantakephotosandvideo
clips using the built-in camera and camcorder.
Section 10: Camera and Camcorder
139
Using the Camera and Camcorder
Usingthecamera/camcordermoduleinyourphone,you
cantakephotosorvideoclipsofpeopleoreventswhileon
the move. Additionally, you can send photos and video
clipstootherpeopleinaPictureMessagingmessageorset
a wallpaper or caller ID image.
Note:
Do not take photos or videos of people without their permission.
Do not take photos or videos in places where cameras are not allowed.
Do not take photos or videos in places where you may interfere with
another person’s privacy.
Take and Send
Your camera produces photos in JPEG format.
Note: When you take a photo in direct sunlight or in bright conditions,
shadows may appear on the photo.
1. In Idle mode, press and Up navigation key to turn on the
camera.
You can also press the Menu soft key to access Menu
mode. Highlight Camera and press the Select soft key or
press the
2. Highlight Take and send and press the Select soft key
or the key.
key.
140
Take and Send
3. Adjust the image by aiming the camera at the subject.
Press the Left soft key to access the camera options. For
details, see "Using Camera Options" on page 141.
You can use the keypad to quickly change the camera
options.
4. Press the
key or the key to take the photo. Send
To: My Album? is displayed. Press the Yes soft key if
you want to send the photo to your T-Mobile My Album
service. The phone’s default destination is set to My
Album. The photo is automatically saved in My Photos
in the phone.
Note: To change the default destination for your pictures, press the
Options soft key when Send To: My Album? appears on the display.
Select the Default destination option. You can then remove or change
your default destination to a phone number, email address, Phonebook, My
Album, My Journal, or a Recent log.
5. To use the photo options, press the Options soft key.
6. To return to Capture mode, select Take another.
7. To return to Idle mode, press the
key.
Using Camera Options
In Capture mode, you can use various options for the
camera by pressing the Left soft key.
The following options are available:
Record video: switches from camera to camcorder.
Shooting mode: allows you to take a photo in various
modes. Once you change the mode, the corresponding
Section 10: Camera and Camcorder
141
indicator appears at the top right of the display. The
following modes are available:
• Single shot: allows you to take a photo in the normal mode.
• Multi shot: allows you to take a series of action stills. Select the
capture speed, High Speed or Normal Speed, and the number
of photos the camera will take.When you press the
camera takes photos successively.
key, the
• Mosaic shot: allows you to take several photos to combine in a
mosaic.
Effects: allows you to change the color tone or apply
special effects to the photo.
Frames: allows you to select a decorative frame. Select a
frame from the list using the Navigation keys and press
the
key to save your setting.
Timer: allows you to set a time delay before the camera
takesthephoto.Selectthelengthofdelayyouwant.When
youpressthe or key, thecameratakesthephotoafter
the specified time has elapsed.
Go to My Photos: takes you to your My photos folder.
Settings: allows you to change the image settings. Select
Function or Setup.
• Function
• Size: allows you to set the image size to either
SXGA(1280X1024), Mega(1152X864), SVGA(800X600),
VGA(640x480), QVGA(320x240), Mobile(176X220), or
Frame(176X132). The selected image size displays on the
capture screen.
142
Take and Send
• View finder: allows you to set the view finder to Full screen,
Full screen & indicator, Full screen & Guideline, or Standard
ratio.
• Scene programs: allows you to choose Normal or Night
scene.
• Metering exposure: allows you to choose between Matrix,
Center-weighted, and spot.
• White balance: allows you to choose between Auto,
Daylight, Incandescent, Fluorescent, Cloudy, and Sunset.
• ISO: allows you to set ISO to Auto, 100, 200, or 400. The ISO
value is a number indicating the digital camera sensors
sensitivity to light. In bright light, set the ISO value lower.
• Setup
• Shutter sound: allows you to select a tone for the shutter
sound. Choose between 5 tones.
• Zoom sound: allows you to turn zoom sound On or Off.
• Brightness sound: allows you to turn brightness sound On
or Off.
• Default name: allows you to change the default name
assigned to your photo.
Camera short cuts: shows you how to change options
usingyourkeypadincapturemode. Thefollowing short
cuts are available:
Up and Down keys zoom in and out.
Left and Right keys adjust the image brightness.
Up volume key flips the image vertically.
Down volume key creates a mirror image.
Section 10: Camera and Camcorder
143
changes from camera to camcorder or camcorder to camera.
changes the picture resolution.
changes the camera shot mode.
changes the color tone or applies a special effect to the photo.
selects ISO settings.
selects a decorative frame.
sets a time delay.
takes you to My photos menu.
changes capture mode to full screen.
adjusts the white balance.
Record Video
Your camcorder produces videos in 3GP format.
1. In Idle mode, press and Up navigation key to turn on the
camera. Press the
camcorder.
key to toggle from camera to
You can also press the Menu soft key to access Menu
mode. Highlight Camera and press the Select soft key or
press the
2. Highlight Record video and press the Select soft key or
the key.
key.
144
Record Video
3. Adjust the image by aiming the camcorder at the subject.
Press the Left soft key to access the camcorder options.
You can use the keypad to quickly change the camcorder
options.
4. To start recording your video clip, press the
key.
5. To stop the recording, press Right soft key. The video
clip is automatically saved in the My videos folder.
6. To delete the video clip, press the Left soft key, highlight
Delete soft key, and press the Select soft key or the
key.
To return to Idle mode, press the
To access camcorder options, press the Left soft key.
Using Camcorder Options
key.
In Capture mode, you can use various options for the
camcorder by pressing the Left soft key.
The following options are available:
Take and send: allows you to take a photo in camera
mode.
Effects: allows you to change the color tone or apply
special effects to the video clip.
Timer:allowsyoutosetatimedelaybeforethecamcorder
takes the video clip. Select the length of delay you want.
When you press the
key, the camcorder records the
video after the specified time has elapsed.
Go to My videos: takes you to your My videos folder
where you can view your videos.
Section 10: Camera and Camcorder
145
Settings: allows you to change the recording settings.
• Recording mode: allows you to change the size of your video.
Select Normal or Limit for Picture message.
• Size: allows you to set the image size to either CIF (352x288),
QVGA (320x240), QCIF(176x144), or Sub-QCIF(128x96). The
selected image size displays on the capture screen.
• View finder: allows you to set the view finder to Full screen
view, Full screen & indicator, or Standard Ratio.
• Audio Record: allows you to be able to record sounds with your
video. Set to On or Off.
• White balance: allows you to choose between Auto, Daylight,
Incandescent, Fluorescent, and Cloudy.
• Scene programs: allows you to choose Normal or Night scene.
• Zoom sound: allows you to turn zoom sound On or Off.
• Brightness sound: allows you to turn brightness sound On or
Off.
• Default name: allows you to change the default name assigned
to your video.
Camcorder short cuts: showsyou how tochange options
using your keypad in capture mode. The following short
cuts are available:
Up and Down keys zoom in and out.
Left and Right keys adjust the video brightness.
Up volume key flips the image vertically.
Down volume key creates a mirror image.
changes from camera to camcorder or camcorder to camera.
146
My Photos
changes the video resolution.
changes the shooting mode.
changes the color tone or applies a special effect to the video.
turns the audio On or Off.
changes scene program from Normal to Night scene.
sets a time delay.
takes you to My videos menu.
changes capture mode to full screen.
adjusts the white balance.
My Photos
1. In Idle mode press the Menu soft key to access the
Menu mode.
2. Highlight Camera and press the Select soft key or the
key.
3. Select My photos and press the Select soft key or the
key.
When you access this menu, your phone displays the
photos in Thumbnail mode, which shows them as small
images. Use the Navigation keys to scroll through the
photos.
4. To view the photos on the full screen, press the
To go back to Thumbnail mode, press the Back soft key
or the key.
key.
Section 10: Camera and Camcorder
147
5. You can use the Left and Right navigation keys to scroll
through your photos.
Photo Album Options
In the My photos menu, press the Options soft key to use
the following options:
• View: allows you to view the photo on your display.
• Send to My Album: allows you to send the photo to My Album.
• Send: allows you to send the photo via Picture message.
• Default destination: allows you to remove or edit the default
destination.
• Set as: allows you to set the photo as your wallpaper or as a
Caller ID.
• Edit image: allows you to add emoticons or frames to your
photos or apply special effects.
• Delete: allows you to delete the photo or delete all photos.
• Rename: allows you to change the name of the photo.
• Display mode: allows you to see your photos displayed in a
Line view or in Thumbnail view.
• Slide show: allows you to see all of your photos in a slide show
presentation.
• Protection: allows you to protect the photo from being deleted.
• Properties: shows the properties of the photo, such as the file
name, file date, file format, image resolution, file size, and
protection status.
Deleting a Photo
You can delete photos one by one or all at one time.
1. From the My Photos menu, select the photo you want to
148
My Videos
delete and press the Options soft key. Highlight the
Delete option and press the Select soft key or the
key.
2. Highlight the Selected option and press the Select soft
key or the
3. Press the Yes soft key to confirm the deletion.
4. When you have finished, press the key.
key. Or, highlight All to delete all photos.
My Videos
1. In Idle mode press the Menu soft key to access the Menu
mode.
2. Highlight Camera and press the Select soft key or the
key.
Select My videos and press the Select soft key or the
key.
When you access this menu, your phone displays the
video clips in Thumbnail mode, which shows them as
small images. Use the Navigation keys to scroll through
the video clips.
3. Press the
key to view the video clip. To view the
key.
video clip on the full screen, press the
My videos Options
In the My videos menu, press the Options soft key to use
the following options:
• Play: allows you to play the video clip on your display.
• Send via picture message: allows you to send the video as
part of a Picture message.
Section 10: Camera and Camcorder
149
• Set as caller ID: allows you to set the video as a Caller ID.
• Delete: allows you to delete the selected video clip or delete all
video clips.
• Rename: allows you to change the name of the video clip.
• Display mode: allows you to see your videos displayed in a
Line view or in Thumbnail view.
• Protection: allows you to protect the video clip from being
deleted.
• Properties: shows the properties of the video clip, such as the
name, date, format, resolution, size, video length, quality, and
protection status.
Deleting a Video Clip
You can delete video clips one by one or all at one time.
1. From the My videos menu, use the Up or Down
Navigation key to highlight the video you want to delete
and press the Options soft key.
2. Highlight the Delete Option, then press the Right
Navigation key.
3. Highlight Selected if you only want to delete the video
clip that you selected. Highlight All if you want to delete
all video clips.
4. Press the Select soft key or the
key.
5. Press the Yes soft key to confirm the deletion.
6. When you have finished, press the
key to return Idle
mode.
150
My Album
My Album
This menuprovidestheabilityforyoutoviewthephotos
you have stored on the t-zone website. Use the following
procedures to access My Album.
1. In Idle mode press the Menu soft key to access the Menu
mode.
2. Highlight Camera and press the Select soft key or the
key.
3. Select My Album and press the Select soft key or the
key. The browser is launched and the T-Mobile Web
page displays.
4. Select the My Albums Menu link and press the
or press the Options soft key and highlight Select. Then
press the OK soft key or the key.
5. Photos sent to this folder are stored in the Inbox Album.
Highlight the Inbox Album link and press the key.
key to view the
key,
Highlight a photo and press the
photos.
6. Press the
key to exit t-zones and return to the Idle
screen.
My Journal
This menu provides the ability for you to store your
photos using the t-zone website.
Section 10: Camera and Camcorder
151
152
t-zones
Your phone is equipped with a WAP (Wireless
Application Protocol) browser to allow you to access and
navigate the Wireless Web using your phone.
To access t-zones, follow these steps:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the t-zones icon.
Press the Select soft key or the
key to enter the
menu.
The following options are available:
Home
Selecting this menu connects the phone to the network
and loads the t-zones homepage. You can also press the
key in Idle mode to launch the t-zones browser.
The content of the t-zones startup homepage depends on
yourWirelessWebserviceprovider. Toscrollthrough the
screen, use the Up and Down keys.
Togotothestartuphomepagefromanyotherscreeninthe
t-zones, use the Home option. For more information on
the t-zones menus, see "Selecting and Using Menu
Exiting the t-zones
To exit the browser at any time, simply press the
key.
Navigating the t-zones
1. To scroll through browser items, press the Up or Down
Navigation key.
154
t-zones
2. To select browser items, press the
key.
3. To return to the previous page, press the
key.
4. To return to the startup homepage, press the Menu soft
key and select the Home option.
Entering Text in the t-zones
Whenyouarepromptedtoentertext, thecurrentlyactive
text input mode is indicated as the Left soft key. Press the
Left soft key to bring up all of the text entry modes. The
following modes are available:
• abc: works the same as ABC mode. See "Using ABC Mode" on
page 47 for more information.
Mode" on page 51 for more information.
page 49 for more information.
Note: You can change the case of the letter to be entered by pressing the
key.
Selecting and Using Menu Options
Various menus are available when you are using t-zones
to navigate the Wireless Web.
To access the browser options menu:
1. Press the Menu soft key.
2. Or, highlight the Openwave icon at the top of the page
by pressing the Up and Down keys and press the Select
soft key or the
key.
Section 11: t-zones
155
Note: The menus may vary, depending on your version of t-zones.
The following options are available:
• Go to URL: allows you to manually enter the URL address of a
Web page. After entering an address, press the OK soft key or
key to go there directly.
• Favorites: shows the bookmarks list. You can bookmark the
current web page or access previously bookmarked pages.
• Messages: allows you to create an SMS message or check
your My messages folder.
• File manager: allows you to access Sounds, Images, Videos,
Music, or check Memory status.
• Home: takes you back at any time to the home page of the
Wireless Web service provider.
• Back: takes you back to the previous web browser screen.
• Show URL: displays the URL address of the Web page to which
you are currently connected. It also enables you to set the
current site as the startup home page.
• Reload: reloads the current page.
Favorites
This menu stores up to 10 URL addresses.
To store a URL address:
1. Select an empty location and press the Select soft key or
or the
key.
2. Enter a name for the favorite item in the Name text box
and press the Down key.
3. Enter the address in the URL text box and press the
Options soft key.
156
t-zones
4. Highlight the Save option and press the Select soft key
or the key.
After saving favorite items, you can access the following
options by selecting the item, then pressing the Options
soft key:
• Go: takes you to the site.
• Edit: allows you to edit the address.
• Delete: allows you to delete the address or you can delete all
addresses.
Or, you can select the favorite item and press the
Your browser will take you to the site.
key.
Go to URL
ThismenuallowsyoutomanuallyentertheURLaddress
of a web site that you wish to access.
For further details about entering text characters, see
Clear Cache
You can clear the information stored in the cache, which
is the phone’s temporary memory which stores the most
recently accessed Web pages.
At the Sure to clear? prompt, press the Yes soft key to
confirm the deletion. Otherwise, press the No soft key.
Section 11: t-zones
157
158
Section 12: WI-FI
Topics Covered
• Introducing Your T-Mobile Wi-Fi Capable Phone
• Connecting to Wi-Fi for the First Time
• Using Wi-Fi
• Connecting to WI-FI Networks
• Wi-Fi Settings
• Troubleshooting
This section introduces you to T-Mobile Wi-Fi
compatibility and provides you with information on Wi-
Fi and instructions on how to use this type of connection
with your phone.
Section 12: WI-FI
159
Introducing Your T-Mobile Wi-Fi Capable Phone
YourphoneiscapableofconnectingtoT-MobileviaWi-Fi
(wirelessInternetbroadband)andGSM(cellulartowers).
When making voice calls, your phone will seamlessly
transfer between Wi-Fi and GSM connections, always
using the network with the best signal strength.
Your T-Mobile Wi-Fi compatible phone is capable of the
following:
• Connect to Wi-Fi at home
Connect to T-Mobile through Wi-Fi if you have a wireless
router set up in your home. See the Get Started Poster
(provided with your phone) and the User Guide for your
wireless router for more information.
• Connect to Wi-Fi while you're on the go (hotspots)
Connect to public Wi-Fi networks at hotspot locations,
such as a T-Mobile HotSpot. Wireless Internet provides
wireless Internet access in convenient locations, such as
airports, coffeehouses, libraries, and many others.
• Connect to GSM
Connect to the GSM network when Wi-Fi is not available
or if you are not interested in connecting to Wi-Fi.
Here's How it Works
Rather than using GSM radio as your phone normally
would to connect your phone to cellular towers, your T-
Mobile Wi-Fi compatible phone uses UMA (Unlicensed
Mobile Access) technology that lets you use a wireless
broadband Internet connection for your mobile phone
160
Introducing Your T-Mobile Wi-Fi Capable Phone
services. This includes voice calls, mobile browsing, e-
mail, Picture Messaging, Text Messaging, and basically
any mobile service for which your phone uses a network
connection.
UMA technology offers fast, reliable, and affordable
connectivity for your life using your mobile phone for
virtually all of your communications. UMA connects
your mobile phoneto yourGSM/GPRSservices through
WLAN (802.11) and allows you to handle calls, send and
receivemessages,andcheckyoure-mail.Thistechnology
allowsyoutouseyourmobilephoneinallofthewaysyou
normally do. The only difference with using UMA
technology is that you are connecting through a wireless
broadband Internet connection (Wi-Fi).
What is Wi-Fi?
Wi-Fi, or Wireless Fidelity, is a term that is used
generically to refer to any product or service using any
type of 802.11 technology. Wi-Fi networks operate in the
unlicensed 2.4 and 5 GHz radio bands, with an 11 Mbps
(802.11b) or 54 Mbps (802.11a) data rate.
Wi-Fienableddevices(laptopsandPDAsaswellasUMA
phones) can send and receive data wirelessly from any
location equipped with Wi-Fi access. This is
accomplished using wireless routers, installed within a
Wi-Fi location. A wireless router transmits an RF signal
to Wi-Fi enabled devices that are within range of the
router. Depending on the particular router, its range is
usually about 300 feet. The speed of the transmission is
governed by the speed of the pipeline fed into the
wireless router.
Section 12: WI-FI
161
What This Means to You
When you are not in range of a Wi-Fi connection, your
normal cellular network takes over and keeps you
connected. Your phone switches automatically from Wi-
Fi to cellular whenever it's necessary to maintain your
connection, whether your phone is in Idle mode or in the
middleofanactivecall.Theswitchingprocessisvirtually
unnoticeable.
Warning: The 911 Emergency Service for your Wi-Fi compatible phone is
somewhat more limited than a traditional wireless or landline 911 service
(for example, the service will not function during electrical power or
broadband outages). Before using this service, you MUST provide us with
the primary street address where you will use it, and you must furnish us
with any address changes. See T-Mobile's Terms and Conditions for other
limitations and information.
Connecting to Wi-Fi for the First Time
Important: You must set up your wireless router first before using your
phone to connect to Wi-Fi. For T-Mobile routers, run the CD that comes
with the router and follow its instructions. If you have a different router,
follow its installation procedures and confirm the router is set up properly.
1. Press and hold the
key to power on your phone.
2. Your phone will show a tutorial prompt. Select Yes to run
the brief tutorial.
162
Connecting to Wi-Fi for the First Time
3. At the end of the tutorial, your phone will detect a Wi-Fi
network and attempt to connect to it. If your router
requires a security key, it will prompt you to enter it. For
T-Mobile routers, select Get Security Key, which
automatically provides security keys for T-Mobile routers
(see "Get Security Key" on page 174 for more
information).
If you have a T-Mobile router, select Yes. This will
acquire the security key or passphrase so that you do not
have to manually type it into your phone.
If you do not have a T-Mobile router, select No. It will
then require you to enter your key or passphrase.
If you are not sure what your key or passphrase (WEP or
WPA encryption) is, please refer to your router
documentation. (For T-Mobile routers see "Get Security
Key" on page 174.
Section 12: WI-FI
163
4. Save the network when prompted. After the network is
saved to your Saved Networks list, you will automatically
connect to that network each time you are within range
(see "Saved Networks" on page 169 for additional
information).
You have connected to your first Wi-Fi network and can
begin making calls using Wi-Fi or your regular T-Mobile
GSM network.
To access all of the Wi-Fi features on your phone, go to
Menu > Settings > Wi-Fi.
If the Tutorial does not appear on your phone, see
Connecting to Wi-Fi Networks section in this manual.
Using Wi-Fi
Once set up for Wi-Fi connectivity, your phone will
automatically use Wi-Fi, when available, for all your
mobilephoneservices. Youcansimplyuseyourphonein
a normalmanner;there isnothing specialyou needtodo.
YourphonewillswitchautomaticallybetweenWi-Fiand
cellular whenever it's necessary to maintain your
connection, whether your phone is idle or on an active
call. When connected to Wi-Fi, the signal bars will change
and the wireless network name will display in the upper
left of the idle screen as shown in the following
illustration.
164
Connecting to Wi-Fi Networks
You will always see the signal bars when on a call. They will change
correctly when you are on a call to indicate what network you are on.
The name of your network will show when on the idle screen as seen
here.
Connecting to Wi-Fi Networks
Connecting to Wi-Fi networks with your phone is what allows you to
makecallsusingWi-Fi. Thefollowingfeaturesweredesignedtokeep
you connected to the networks you want:
• View available networks
• View saved networks that you use often
• Find open networks quickly
Available Networks
The list of available networks displays all the available
Wi-Fi networks to which you can connect. The networks
are listed in the order of their signal strength, from the
strongest signal to the weakest.
Section 12: WI-FI
165
Note: If you want to connect to a secure network (marked by a key icon),
you will be prompted to provide the security key for that network. If you
change the router settings, you can edit the phone's profile with the new
setting or you can create a new phone profile.
signal-strength
indicates that a network is connected.
indicates that a network has been saved to your Saved
Networks list (see next section for details).
indicates that a network is protected with a security key (see
"Get Security Key" on page 174 for more information).
checkmark
Note: Set up your wireless router first. For T-Mobile routers, run the CD
that comes with the router and follow its instructions. If you have a
different router, follow its installation procedures and confirm the router is
set up properly.
Connect to Wi-Fi from the Available Networks
1. From the idle screen, press the Menu soft key to access
Menu mode.
2. Using the Navigation keys, highlight Settings and press
the Select soft key to enter the menu.
3. Highlight the Wi-Fi option and press the Select soft key.
4. Highlight the Available Networks option and press the
Select soft key.
5. The phone searches for all available networks and then
displays a list of available networks.
166
Connecting to Wi-Fi Networks
6. Highlight the network to which you want to connect and
press the Options soft key. Highlight the Connect option,
and press the Select soft key. You will be prompted to
save the network.
7. When prompted, press the Yes soft key to save the
network to your Saved Networks list.
8. Create a profile name for your network and press the OK
soft key.
Section 12: WI-FI
167
After the network is saved to your Saved Networks list,
you will automatically connect to that network each time
you are within range (see "Saved Networks" on page
169 for additional information).
On the Available Networks list, a checkmark indicates a
network to which you are currently connected, a star
indicates that a network is saved, and a key indicates a
network is protected with a security key.
key
signal-strength
star
checkmark
Note: Press the Back soft key from the Available Networks list to return to
the Wi-Fi menu.
Available Networks Options
From the Available Networks menu, press the Options
soft key to use the following options:
168
Connecting to Wi-Fi Networks
• Connect/Disconnect: Connects or disconnects your phone to
or from the currently highlighted network. This option changes
dynamically, depending on whether or not your phone is
currently connected to a Wi-Fi network. Alternatively, you can
connect to a network on the Available Networks list by
highlighting the network and pressing the Select soft key.
• Refresh: Refreshes the list of available networks to include any
recent changes, for example new Wi-Fi networks recently set
up or others that have been removed from service.
• View Details: Displays the details for the currently highlighted
Wi-Fi network.
• Save: Saves the selected network to your Saved Networks
List. This option appears only if the network is not already
saved.
Saved Networks
The Saved Networks list displays all of the Wi-Fi
networks you have saved on your phone. If you set up
your phone for automatic connections, you will
automatically be connected to a Wi-Fi network on your
Saved Networks List each time you are within range of
that network.
Important: Networks displayed on the Saved Networks List are networks
that are saved and not necessarily those that are in range and available.
Editing a saved network's profile name will not affect the ability to connect
to that network. However, changing the SSID field or security settings will
impact the ability to connect.
If you change the router settings, you can edit the phone's profile with the
new setting or you can create a new phone profile.
Section 12: WI-FI
169
On the Saved Networks List,
indicates a network
to which you are currently
a
.
connected
Connect to a Specific Saved Network
1. From the idle screen, press the Menu soft key to access
Menu mode.
2. Using the Navigation keys, scroll to Settings. Press the
Select soft key to enter the menu.
3. Highlight the Wi-Fi option and press the Select soft key.
4. Highlight the Saved Networks option and press the
Select soft key. The phone displays your Saved
Networks List.
5. Highlight the network to which you want to connect and
press Options > Connect. Your phone will connect to the
Wi-Fi network if it is available.
6. On the Saved Networks List, a checkmark indicates a
network to which you are currently connected.
Note: Press the Back soft key from the Available Networks list to return to
the Wi-Fi menu.
170
Connecting to Wi-Fi Networks
Saved Networks Options
In the Saved Networks menu, press the Options soft key
to use the following options:
• Edit Details: Allows you to edit the highlighted Wi-Fi network's
parameters. Note that this option is not available for your T-
Mobile-designated Wi-Fi network profiles.
• Connect/Disconnect: Connects or disconnects your phone to
or from the currently highlighted network. This option changes
dynamically, depending on whether or not your phone is
currently connected to a Wi-Fi network. Alternatively, you can
connect to a network on the Saved Networks list.
• Delete: Deletes the selected network from the Saved Networks
list. Note that this option is not available for your T-Mobile-
designated Wi-Fi network profiles.
• Forward Settings: Sends the highlighted network's settings
to another user. Note that this option is not available for your T-
Mobile designated Wi-Fi network profiles.
• Priority: Lets you change the order of the Wi-Fi networks to
which your phone will attempt to connect. Connections to
networks with a higher priority are tried first.
Section 12: WI-FI
171
• Add New Network: Adds a new network to your Saved
Networks list. This option also allows you to manually add
settings for the new network. The submenu items for the Add
New menu are as follows:
• From Available Networks: Allows you to add a new
network from the list of Available Networks.
• Create Manually: Allows you to manually enter the new
network's settings.
Quick Connect
Select the Quick Connect option from the Wi-Fi menu to
scan for any available preferred or open Wi-Fi network
and connect to the network with the best signal strength.
Thisfeatureallows youto make aquick Wi-Fi connection
in instances where you know you are within range of an
open Wi-Fi network.
Note: Quick Connect will not attempt to connect to closed or secured
wireless networks that are not part of the Saved Networks List.
Use Quick Connect
Ⅵ From the Idle screen, press and hold the
key. Your phone
connects to the strongest Wi-Fi network within range.
172
Connecting to Wi-Fi Networks
Or..
1. From the Idle screen, press the Menu soft key to access
Menu mode and proceed through the following steps:
2. Using the Navigation keys, scroll to Settings. Press the
Select soft key to enter the menu.
3. Highlight the Wi-Fi option and press the Select soft key.
4. Highlight the Quick Connect option and press the Select
soft key.
5. Your phone will connect to the strongest Wi-Fi network
available.
Note: If the Quick Connect option is selected when your phone is in Sleep
mode (Wi-Fi OFF), the phone automatically switches to Active Mode (Wi-Fi
ON) before attempting to make the connection. During the Quick Connect
process, the phone will not display any error messages if it fails to
connect to a network.
Turn Wi-Fi On/Off
Select the Turn Wi-Fi ON/OFF option from the Wi-Fi
menu to activate/deactivate the Wi-Fi feature. Your
phone's default state is Wi-Fi On (Active Mode). Wi-Fi
should be left on to take advantage of the seamless
transfer between regular cellular networks.
Section 12: WI-FI
173
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to Settings. Press the
Select soft key to enter the menu.
3. Highlight the Wi-Fi option and press the Select soft key.
4. Highlight the Turn Wi-Fi ON/OFF option and press the
Select soft key.
Note: If the Quick Connect option is selected when your phone is in Sleep
mode (Wi-Fi OFF), the phone automatically switches to Active Mode (Wi-Fi
ON) before attempting to make the connection.
Get Security Key
GetSecurityKeyoptioncanonlybeusedwithaT-Mobile
wireless router. Select the Get Security Key option from
the Wi-Fi menu to acquire the security key for a T-Mobile
Wi-Fi compatiblephone froma T-Mobilewirelessrouter.
This feature is about exchanging security information
between a T-Mobile router and a T-Mobile WI-Fi phone.
When used with an open network, the Get Security Key
process will create a WPA key on the router. This key is
174
Connecting to Wi-Fi Networks
automatically transferred to the phone. All laptops and
devices connected wirelessly will need to be manually
configuredforthenewsecurity.Whenusedonanalready
securednetwork, thekeyconfiguredontherouterwillbe
transferred to the phone. For the duration of the process
(for example, while the
on the router is blinking), all
laptops and devices using the wireless network will lose
their connection.
For T-Mobile routers without encryption enabled,
following this sequence will turn on WPA and send the
security key to your T-Mobile phone. If you already have
encryption enabled, the light will be steadily lit on the T-
Mobile router, and the current router settings will be sent
to the phone.
Note: If you change the router settings, you can edit the phone's profile
with the new setting or you can create a new phone profile.
GetSecurityKeyoptioncanonlybeusedwithaT-Mobile
wireless router. Select the Get Security Key option from
theWi-FimenutoacquireautomaticsecuritykeysforaT-
Section 12: WI-FI
175
MobileWi-FicompatiblephonefromaT-Mobilewireless
router.
Use Get Security Key
1. From the idle screen, press the Menu soft key to access
Menu mode.
2. Using the Navigation keys, scroll to Settings. Press the
Select soft key to enter the menu.
3. Highlight the Wi-Fi option and press the Select soft key.
4. Highlight the Get Security Key option and press the
Select soft key.
5. Follow the on-screen prompts to step through the
process of acquiring security keys.
This process involves pressing the secure button on the
front of the router. You can identify the secure button by
the
on,oradjacenttothebutton.Thekey/passphrase
will be stored with the profile on your Saved Networks
list. The phone will try to connect to a network after
successfully securing.
You can also enter a security key manually in the phone.
If connecting via available networks, the phone will
prompt you to enter the key for WEP or passphrase for
WPA. You can also follow the steps for manually adding
a network seen in a subsequent section of the manual.
When entering a security key, if numbers are part of the
key, press and hold the desired key to quickly access the
number, this bypasses the multi-tap text entry mode.
Inordertoviewthesecuritykey,youmayneedtologinto
your wireless router's administrative site. If you printed
176
Connecting to Wi-Fi Networks
or saved your settings when setting up your router, you
may reference this as well.
Add New Network
By adding a network to your phone, you can
automatically connect to the network when you are in
range. If it requires a security key or passphrase, you can
enter the key and the phone stores the key or passphrase
with the profile.
You can add a new network using one of the following
methods:
• When connecting to a network from Available Networks,
select to save when prompted
• Select Add New Network from the Available Networks List
• Select Add New Network > Create Manually
• Select Saved Networks > Create Manually
Add From Available Network Option
To add a new network to your Saved Networks list from
your list of available networks:
Section 12: WI-FI
177
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to Settings. Press the
Select soft key to enter the menu.
3. Highlight the Wi-Fi option and press the Select soft key.
4. Highlight the Add New Network option and press the
Select soft key.
5. Highlight the From Available Networks option and
press the Select soft key. The phone searches for
available networks and displays a list of networks in
signal-strength order.
6. Highlight the network you want and press the Save soft
key. To give the network a new name before saving it,
use the Cancel
type a new network name.
7. Press the key to save the new network.
Add Manually
key to delete the name and then
TomanuallyaddanewnetworktoyourSavedNetworks
list:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to Settings. Press the
Select soft key to enter the menu.
3. Highlight the Wi-Fi option and press the Select soft key.
4. Highlight the Add New Network option and press the
Select soft key.
178
Connecting to Wi-Fi Networks
5. Highlight the Create Manually option and press the
Select soft key.
6. Type your desired profile name for the network.
7. Press the Down key to highlight the SSID option. Enter
the new network's SSID.
The SSID (Service Set Identifier), is the actual name of
the wireless network, not the profile name you entered.
The profile name is simply a name to help you keep track
of which network is which. The SSID is a key piece of
information needed to locate and connect to a wireless
network.
8. Press the Down key to highlight the Security Type
option. Press the Left or Right key to set to KEY NONE,
WEP 64 KEY, WEP 128 KEY, WPA KEY, or WPA2 KEY.
Note: The Security Type refers to the particular security protocol being
used for a specific wireless network. WPA is the current security standard
for wireless networks and is recommended by T-Mobile. WEP is an older,
and less robust security standard, but it provides wider compatibility.
9. Press the Down key to highlight the Key option. Type the
security key.
10. Press the Down key to highlight the Connection Setting
option. Press the Left or Right key to set to
Automatically Connect, Don't Automatically
Connect, or Ask Before Connecting.
Section 12: WI-FI
179
11. Press the Down key to highlight the Non-Broadcast
SSID option. Press the key to place a checkmark in
this box if your router does NOT broadcast its SSID. In
general, the default setting for most routers will
broadcast the SSID.
12. Press the Down key to highlight the Inter AP handovers
option. Press the
key to place a checkmark in this
box if you can connect to multiple Wi-Fi access points
(AP) and would like your phone to switch automatically
(while on a call) when leaving one Wi-Fi zone and
entering another nearby Wi-Fi zone.
13. Press the Down key to highlight the IP setting option.
Press the Left or Right key to set to Dynamic or Static.
Dynamic is the standard and recommended setting.
ⅷ If you select Static in this step, press the Down key to
highlight the IP address option. Press the
key to enter
the IP address menu. If you are using a T-Mobile Router, copy
the information regarding the Subnet Mask, DSN Server, and
Gateway from your router into your phone. The IP address you
input must be different from the one you use to access the
router. If you are connected to a Wi-Fi network that requires
Static IP addresses (usually in a corporate environment), please
see your System Administrator to get the required information.
14. When finished, press the Save soft key.
Troubleshooting
Thissectionprovidesresourcesfordeterminingsolutions
to problems or issues that may occur with your T-Mobile
Wi-Fi compatible phone.
180
Troubleshooting
T-Mobile Wi-Fi Help
Use the following steps to select the Wi-Fi Help option
from the Wi-Fi menu and get specific Wi-Fi assistance.:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to Settings. Press the
Select soft key to enter the menu.
3. Highlight the Wi-Fi option and press the Select soft key.
4. Highlight the Wi-Fi Help option and press the Select soft
key.
Section 12: WI-FI
181
Understanding Displayed Error Codes
The following table provides information on how to
interpret the error messages that, from time to time, may
appear on your phone.
Error
Code
Displayed
Error Text
Meaning
How to fix it
W000
Security key
incorrect.
The security on 1.Re-enterthekeyonthephoneto
the router does match the key configured on the
not match the router. Make sure that the
security on the encryption type and security
phone..
settings match on the router and
phone.
2. If on the available network list,
the network in question does not
have a key next to it, check if MAC
filteringisenabled onthe wireless
router.Ifitis,checkthatthephone
MAC address is on the Safe List, if
not, add it.
182
Troubleshooting
Error
Code
Displayed
Error Text
Meaning
How to fix it
W010
Wi-Fi Connection The wireless
1. The wireless network is not in
Failed
network is no range or has a weak signal to
longer in range, provide a successful connection.
or it has a weak
signal.
2. If the attempt to connect is
through the Saved Networks list,
the network may not be available
or the profile saved has different
security settings than the
available WLAN.
3. If the attempt to connect is
through the Available Networks
list, then the user has probably
walked out of the area of coverage
of that particular WLAN.
Section 12: WI-FI
183
Error
Code
Displayed
Error Text
Meaning
How to fix it
W002
Wi-Fi Connection The phone was 1. If WEP encryption is in use,
Failed
unable to get an check that the key configured on
IP address from theroutermatchesthekeyentered
the DHCP server on th e phone.
in order to
establish a
connection.
2. DHCP may be disabled on the
wireless router and there is no
otherDHCPserveronthenetwork.
MakesurethattheoptionofDHCP
is set to enable on the wireless
router.
3. DHCP pool may be exhausted -
Need to increase the range of the
DHCP server. If the number of
devices currently connectedtothe
WLAN is greater than the number
of IP addresses available, then
increase the range.
4. The wireless network the user is
trying to connect to is configured
for static IP addresses only, check
with the system administrator for
an IP address assignment.
5.CheckifMACfilteringisenabled
onthewirelessrouter.Ifitis,check
that the phone MAC address is on
the Safe List, if not, add it.
184
Troubleshooting
Error
Code
Displayed
Error Text
Meaning
How to fix it
W003
Wi-Fi Connection The phone
1. Another device on the WLAN
Failed
detected an IP network (laptop, desktop or
Address conflict. phone)hasthesameIPaddressas
the phone displaying the error,
make sure that no other device is
set for static IP addresses. User
mightwanttore-tryconnectingto
the network.
2.Ifthephoneisbeingconfigured
with a static IP address, then this
address is currently being used by
anotherdeviceonthenetwork, try
togetanother IPaddress assigned
to the phone.
W004
ISP error. DNS
The phone
1. Retry connecting to the
server cannot be cannotcontacta network.
reached. W004
DNS server
2. Reboot the T-Mobile wireless
router, if applicable.
W005.1 ISP Error. Retry. The phone is 1. Retry connecting to the
unable to
establish
network.
2. Reboot the T-Mobile wireless
router, if applicable.
network
connectivity.
Section 12: WI-FI
185
Error
Code
Displayed
Error Text
Meaning
How to fix it
W005.2 ISP Error. Retry. The phone is 1. Retry connecting to the
unable to
establish
network.
2. Reboot the T-Mobile wireless
router, if applicable.
network
connectivity.
W005.3 ISP Error. Retry. The phone is 1. Retry connecting to the
unable to
establish
network.
2. Reboot the T-Mobile wireless
router, if applicable.
network
connectivity.
W005.4 T-Mobile Network The phone is 1. Retry connecting to the
Error. Retry
unable to
establish
network.
2. Reboot the T-Mobile wireless
router, if applicable.
network
connectivity.
W005.5 T-Mobile Network The phone is 1. Retry connecting to the
Error. Retry.
unable to
establish
network.
2. Reboot the T-Mobile wireless
router, if applicable.
network
connectivity.
W005.6 T-Mobile Network The phone is 1. Retry connecting to the
Error. Retry.
unable to
establish
network.
2. Reboot the T-Mobile wireless
router, if applicable.
network
connectivity.
186
Troubleshooting
Error
Code
Displayed
Error Text
Meaning
How to fix it
W006.1 ISP or T-Mobile The phone is 1. The connection to the WAN port
Network error.
unable to
establish
of the wireless router is down:
either the cable is unplugged or
the DSL/Cable modem
network
connectivity:
(whichever applies) is turned off.
This could be a This could also be caused by an
problem on the o u t a g e o f t h e D S L / C a b l e s e r v i c e .
ISP side or the
network side.
2.CheckifMACfilteringisenabled
onthewirelessrouter.Ifitis,check
that the phone MAC address is on
theSafeList,ifnot,addit.
3. The network that the user is
trying to connect to uses Web Re-
direction: this means that when
tryingtoconnecttothenetworkin
question with a laptop, you are
required to enter username and
password or pay to use the service.
Thephonecannotconnecttosuch
networks.
4. The problem can be caused by
network issues. At this point, the
user might want to try at a later
time.
Section 12: WI-FI
187
Error
Code
Displayed
Error Text
Meaning
How to fix it
W006.2 ISP or T-Mobile The phone is 1. The connection to the WAN port
Network error.
unable to
establish
of the wireless router is down:
either the cable is unplugged or
the DSL/Cable modem
network
connectivity:
(whichever applies) is turned off.
This could be a This could also be caused by an
problem on the outage of the DSL/Cable service.
ISP side or the
network side.
2.CheckifMACfilteringisenabled
onthewirelessrouter.Ifitis,check
that the phone MAC address is on
the Safe List, if not, add it.
3. The network that the user is
trying to connect to uses Web Re-
direction: this means that when
tryingtoconnecttothenetworkin
question with a laptop, you are
required to enter username and
password or pay to use the service.
Thephonecannotconnecttosuch
networks.
4. The problem can be caused by
network issues. At this point, the
user might want to try at a later
time.
188
Troubleshooting
Error
Code
Displayed
Error Text
Meaning
How to fix it
W006.3 ISP or T-Mobile The phone is 1. The connection to the WAN port
Network error.
unable to
establish
of the wireless router is down:
either the cable is unplugged or
the DSL/Cable modem
network
connectivity:
(whichever applies) is turned off.
This could be a This could also be caused by an
problem on the outage of the DSL/Cable service.
ISP side or the
network side.
2.CheckifMACfilteringisenabled
onthewirelessrouter.Ifitis,check
that the phone MAC address is on
the Safe List, if not, add it.
3. The network that the user is
trying to connect to uses Web Re-
direction: this means that when
tryingtoconnecttothenetworkin
question with a laptop, you are
required to enter username and
password or pay to use the service.
Thephonecannotconnecttosuch
networks.
4. The problem can be caused by
network issues. At this point, the
user might want to try at a later
time.
Section 12: WI-FI
189
Error
Code
Displayed
Error Text
Meaning
How to fix it
W006.4 T-Mobile Network The phone is
error.
unable to
establish
network
connectivity
W006.5 T-Mobile Network The phone is
error
unable to
establish
network
connectivity
W006.6 T-Mobile Network The phone is
error.
unable to
establish
network
connectivity
W006.7 T-Mobile Network The phone is
error.
unable to
establish
network
connectivity
W006.8 T-Mobile Network The phone is
error.
unable to
establish
network
connectivity
190
Troubleshooting
Error
Code
Displayed
Error Text
Meaning
How to fix it
W006.9 T-Mobile Network The phone is
error.
unable to
establish
network
connectivity
J007
Incorrect Security
Certificate.
Make sure that the date set on the
phone is current and not set to a
previous year.
J008.0
J008.1
Network Busy.
Retry.
The network is experiencing
congestion, try at a later time.
Failed to connect. Network
Retry
connectivity
failed.
J008.2
Phone not allowed
on T-Mobile
network.
The phone is not allowed to use
UMA service.
J008.3+ Phone not allowed
on T-Mobile
network.
J009.0
J009.1
Network Busy.
Retry
The network is experiencing
congestion, try at a later time.
Failed to connect. Network
Retry. connectivity
failed.
Section 12: WI-FI
191
Error
Code
Displayed
Error Text
Meaning
How to fix it
J009.2
Phone not allowed
on T-Mobile
network.
The phone is not allowed to use
UMA service.
J009.3+ Phone not allowed
on T-Mobile
network.
J0010.0 Network Busy.
Retry
The network is experiencing
congestion, try at a later time.
J0010.1 Failed to connect. Network
Retry.
connectivity
failed.
J0010.2 Phone not allowed
on T-Mobile
The phone is not allowed to use
UMA service.
network.
J0010.3 Phone not allowed
on T-Mobile
network.
J0011.0 Network Busy.
Retry
The network is experiencing
congestion, try at a later time.
J0011.1 Failed to connect. Network
Retry. connectivity
failed.
Thewirelessrouterthroughwhich
the phone is trying to use UMA
service is not allowed on the
network. Trying to access the
service through another network
should fix the problem.
192
Troubleshooting
Error
Code
Displayed
Error Text
Meaning
How to fix it
J0011.2 Failed to connect. Network
Connections from the current
location are not allowed to go
through. Using the service at a
different location should fix the
problem.
Location not
allowed
connectivity
failed.
J0011.3 Phone not allowed
on T-Mobile
network.
J0011.4 Failed to connect. Network
Connections from the current
location are not allowed to go
through. Using the service at a
different location should fix the
problem.
Location
connectivity
failed.
unknown.
J0011.5 Phone not allowed
on T-Mobile
The phone is not allowed to use
UMA service.
network.
J0011.6 Failed to connect. Network
Retry. connectivity
failed.
J0011.7 Failed to connect. Network
Retry. connectivity
failed.
J0011.8 Failed to connect. Network
Retry. connectivity
failed.
Section 12: WI-FI
193
Error
Code
Displayed
Error Text
Meaning
How to fix it
J0011.9 Failed to connect. Network
Retry. connectivity
failed.
0011.10 Failed to connect. Network
Retry. connectivity
failed.
J0011.11 Failed to connect. Network
Retry.
connectivity
failed.
J0011.12 Phone not allowed
on T-Mobile
network.
J0012.0 Network Busy.
Retry
The network is experiencing
congestion, try at a later time.
J0012.1 Failed to connect. Network
Retry. connectivity
failed.
Thewirelessrouterthroughwhich
the phone is trying to use UMA
service is not allowed on the
network. Trying to access the
service through another network
should fix the problem.
J0012.2 Failed to connect. Network
Connections from the current
location are not allowed to go
through. Using the service at a
different location should fix the
problem.
Location not
allowed
connectivity
failed.
194
Troubleshooting
Error
Code
Displayed
Error Text
Meaning
How to fix it
J0012.3 Phone not allowed
on T-Mobile
network.
J0012.4 Failed to connect. Network
Connections from the current
location are not allowed to go
through. Using the service at a
different location should fix the
problem.
Location
connectivity
failed.
unknown.
J0012.5 Phone not allowed
on T-Mobile
The phone is not allowed to use
UMA service.
network.
J0012.6 Failed to connect. Network
Retry. connectivity
failed.
J0012.7 Failed to connect. Network
Retry. connectivity
failed.
J0012.8 Failed to connect. Network
Retry. connectivity
failed.
J0012.9 Failed to connect. Network
Retry. connectivity
failed.
Section 12: WI-FI
195
Error
Code
Displayed
Error Text
Meaning
How to fix it
J0012.10 Failed to connect. Network
Retry. connectivity
failed.
J0012.11 Failed to connect. Network
Retry.
connectivity
failed.
J0012.12 Phone not allowed
+
on T-Mobile
network.
J0013.0 Network Busy.
Retry
The network is experiencing
congestion, try at a later time.
J0013.1 Failed to connect. Network
Retry. connectivity
failed.
Thewirelessrouterthroughwhich
the phone is trying to use UMA
service is not allowed on the
network. Trying to access the
service through another network
should fix the problem.
J0013.2 Failed to connect. Network
Connections from the current
location are not allowed to go
through. Using the service at a
different location should fix the
problem.
Location not
allowed
connectivity
failed.
J0013.3 Phone not allowed
on T-Mobile
network.
196
Troubleshooting
Error
Code
Displayed
Error Text
Meaning
How to fix it
J0013.4 Failed to connect. Network
Connections from the current
location are not allowed to go
through. Using the service at a
different location should fix the
problem.
Location
connectivity
failed.
unknown.
J0013.5 Phone not allowed
on T-Mobile
The phone is not allowed to use
UMA service.
network.
J0013.6 Failed to connect. Network
Retry. connectivity
failed.
J0013.7 Failed to connect. Network
Retry. connectivity
failed.
J0013.8 Failed to connect. Network
Retry. connectivity
failed.
J0013.9 Failed to connect. Network
Retry. connectivity
failed.
J0013.10 Failed to connect. Network
Retry. connectivity
failed.
Section 12: WI-FI
197
Error
Code
Displayed
Error Text
Meaning
How to fix it
J0013.11 Failed to connect. Network
Retry.
connectivity
failed.
J0013.12 Phone not allowed
+
on T-Mobile
network.
198
Section 13: Health and Safety
Information
Topics Covered
• Health and Safety Information
• Consumer Information on Wireless Phones
• Road Safety
• Operating Environment
• Using Your Phone Near Other Electronic Devices
• Potentially Explosive Environments
• Emergency Calls
• FCC Notice and Cautions
• Other Important Safety Information
• Product Performance
• Availability of Various Features/Ring Tones
• Battery Standby and Talk Time
• Battery Precautions
• Care and Maintenance
This section outlines the safety precautions associated
with using your phone. These safety precautions should
be followed to safely use your phone.
Section 13: Health and Safety Information
199
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It
isdesignedandmanufacturednottoexceedtheexposure
limits for radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S.
government.TheseFCCexposurelimitsarederivedfrom
the recommendations of two expert organizations, the
National Counsel on Radiation Protection and
Measurement (NCRP) and the Institute of Electrical and
Electronics Engineers (IEEE). In both cases, the
recommendations were developed by scientific and
engineering experts drawn from industry, government,
and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile
phones employs a unit of measurement known as the
Specific Absorption Rate (SAR). The SAR is a measure of
the rate of absorption of RF energy by the human body
expressedinunitsofwattsperkilogram(W/kg).TheFCC
requires wireless phones to comply with a safety limit of
1.6 watts per kilogram (1.6 W/kg). The FCC exposure
limit incorporates a substantial margin of safety to give
additional protection to the public and to account for any
variations in measurements.
200
Health and Safety Information
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
testedfrequencybands.AlthoughtheSARisdetermined
at the highest certified power level, the actual SAR level
of the phone while operating can be well below the
maximumvalue.Thisisbecausethephoneisdesignedto
operate at multiple power levels so as to use only the
power required to reach the network. In general, the
closeryouaretoawirelessbasestationantenna,thelower
the power output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in
positions and locations (e.g. at the ear and worn on the
body) as required by the FCC. For body worn operation,
this phone has been tested and meets FCC RF exposure
guidelines when used with an accessory that contains no
metalandthatpositionsthehandsetaminimumof1.5cm
from the body. Use of other accessories may not ensure
compliance with FCC RF exposure guidelines.
The FCC has granted an Equipment Authorization for
thismobile phonewithallreportedSAR levels evaluated
as in compliance with the FCC RF exposure guidelines.
The maximum SAR values for this model phone as
reported to the FCC are:
Section 13: Health and Safety Information
201
• Head: .24 W/Kg.
• Body-worn: .7 W/Kg.
SAR information on this and other model phones can be
viewed on-line at www.fcc.gov/oet/fccid. To find
information that pertains to a particular model phone,
this site uses the phone FCC ID number which is usually
printed somewhere on the case of the phone. Sometimes
it may benecessary toremove the battery pack to find the
number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website
anditshouldprovidevaluesfortypicalormaximumSAR
for a particular phone. Additional product specific SAR
information can also be obtained at www.fcc.gov/cgb/
sar.
UL Certified Travel Adapter
TheTravelAdapterforthisphonehasmetUL1310safety
requirements. Please adhere to the following safety
instructions per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS
OUTLINED MAY LEAD TO SERIOUS PERSONAL
INJURY AND POSSIBLE PROPERTY DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS.
FORCONNECTIONTOASUPPLYNOTINTHEU.S.A.,
USE AN ATTACHMENT PLUG ADAPTOR OF THE
PROPER CONFIGURATION FOR THE POWER
OUTLET.
202
Consumer Information on Wireless Phones
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes the
following information:
What kinds of phones are the subject of this update?
Thetermwirelessphonerefersheretohand-heldwireless
phones with built-in antennas, often called "cell,"
"mobile,"or"PCS"phones.Thesetypesofwirelessphones
canexposetheusertomeasurableradiofrequencyenergy
(RF)becauseoftheshortdistancebetweenthephoneand
theuser'shead.TheseRFexposuresarelimitedbyFederal
Communications Commission safety guidelines that
weredevelopedwiththeadviceofFDAandotherfederal
health and safety agencies. When the phone is located at
greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure
decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a
base unit connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus
produce RF exposures well within the FCC's compliance
limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range
Section 13: Health and Safety Information
203
while being used. They also emit very low levels of RF
wheninthestand-bymode.WhereashighlevelsofRFcan
producehealtheffects(byheatingtissue),exposuretolow
level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level
RFexposureshavenotfoundanybiologicaleffects. Some
studies have suggested that some biological effects may
occur, but such findings have not been confirmed by
additionalresearch.Insomecases,otherresearchershave
had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new drugs
ormedicaldevices. However,theagencyhasauthorityto
take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the
user.Insuchacase,FDAcouldrequirethemanufacturers
ofwirelessphonestonotifyusersofthehealthhazardand
torepair,replaceorrecallthephonessothatthehazardno
longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
• Support needed research into possible biological effects of RF
of the type emitted by wireless phones;
204
Consumer Information on Wireless Phones
• Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device function;
and
• Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use
on human health.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States must
comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than
thosetheycangetfromwirelessphones. Basestationsare
Section 13: Health and Safety Information
205
thus not the primary subject of the safety questions
discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy (RF)
exposures characteristic of wireless phones have yielded
conflicting results that often cannot be repeated in other
laboratories. A few animal studies, however, have
suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However,
many of the studies that showed increased tumor
development used animals that had been genetically
engineeredortreatedwithcancer-causingchemicalssoas
to be pre-disposed to develop cancer in absence of RF
exposure. Other studies exposedtheanimals toRFfor up
to22hoursperday.Theseconditionsarenotsimilartothe
conditions under which people use wireless phones, so
we don't know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, glioma,
meningioma, oracousticneuroma, tumorsofthebrainor
salivary gland, leukemia, or other cancers. None of the
studiesdemonstratedtheexistenceofanyharmfulhealth
effects from wireless phones RF exposures. However,
noneofthestudiescananswerquestionsaboutlong-term
206
Consumer Information on Wireless Phones
exposures,sincetheaverageperiodofphoneuseinthese
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and
epidemiologicalstudiesofpeopleactuallyusingwireless
phones would provide some of the data that are needed.
Lifetime animal exposure studies could be completed in
a few years. However, very large numbers of animals
would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies
can provide data that is directly applicable to human
populations, but ten or more years' follow-up may be
needed to provide answers about some health effects,
such as cancer. This is because the interval between the
time of exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many years.
The interpretation of epidemiological studies is
hamperedbydifficultiesinmeasuringactualRFexposure
during day-to-day use of wireless phones. Many factors
affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
Section 13: Health and Safety Information
207
FDA has been a leading participant in the World Health
OrganizationinternationalElectromagneticFields(EMF)
Project since its inception in 1996. An influential result of
this work has been the development of a detailed agenda
ofresearchneedsthathasdriventheestablishmentofnew
researchprogramsaroundtheworld.TheProjecthasalso
helpeddevelopaseriesofpublicinformationdocuments
on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
andDevelopmentAgreement(CRADA)todoresearchon
wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we
do not know that there is - it is probably very small. But if
you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a
key factor in how much exposure a person receives,
reducingtheamountoftimespentusingawirelessphone
will reduce RF exposure.
208
Consumer Information on Wireless Phones
• If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or
use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that
wireless phones are harmful. But if you are concerned
about the RF exposure from these products, you can use
measures like those described above to reduce your RF
exposure from wireless phone use.
What about children using wireless phones?
Thescientificevidencedoesnotshowadangertousersof
wirelessphones,includingchildrenandteenagers. Ifyou
want to take steps to lower exposure to radio frequency
energy (RF), the measures described above would apply
to children and teenagers using wireless phones.
Reducing the time of wireless phone use and increasing
the distance between the user and the RF source will
reduce RF exposure.
Some groups sponsored by other national governments
have advised that children be discouraged from using
wirelessphonesatall.Forexample,thegovernmentinthe
United Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly
precautionary;itwasnotbasedonscientificevidencethat
any health hazard exists.
Section 13: Health and Safety Information
209
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF
energyintheheadbecausethephone, whichisthesource
of the RF emissions, will not be placed against the head.
On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part
of the body will absorb more RF energy. Wireless phones
marketed in the U.S. are required to meet safety
requirementsregardlessofwhethertheyareusedagainst
the head or against the body. Either configuration should
result in compliance with the safety limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believethataccessories that claim toshieldtheheadfrom
thoseemissionsreducerisks.Someproductsthatclaimto
shield the user from RF absorption use special phone
cases, while others involve nothing more than a metallic
accessoryattachedtothephone.Studieshaveshownthat
these products generally do not work as advertised.
Unlike "hand-free" kits, these so-called "shields" may
interfere with proper operation of the phone. The phone
may be forced to boost its power to compensate, leading
to an increase in RF absorption. In February 2002, the
FederaltradeCommission(FTC)chargedtwocompanies
210
Consumer Information on Wireless Phones
that sold devices that claimed to protect wireless phone
users from radiation with making false and
unsubstantiated claims. According to FTC, these
defendantslackedareasonablebasistosubstantiatetheir
claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other
groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers
and defibrillatorsaresafefromwirelessphoneEMI. FDA
has tested wireless phones and helped develop a
voluntary standard sponsored by the Institute of
Electrical and Electronic Engineers (IEEE). This standard
specifiestestmethodsandperformancerequirementsfor
hearing aids and wireless phones so that no interference
occurs when a person uses a compatible phone and a
compatible hearing aid at the same time. This standard
was approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmfulinterferencebefoundtooccur,FDAwillconduct
Section 13: Health and Safety Information
211
testing to assess the interference and work to resolve the
problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the following
organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/
index.html
• National institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/topics/emf
• World health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.nrpb.org.uk
• Updated 4/3/2002: US Food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicatebyvoice,almostanywhere,anytime.Butan
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
212
Road Safety
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features help
you to place your call without taking your attention off
the road.
2. When available, use a hands-free device. If possible,
add an additional layer of convenience and safety to
your wireless phone with one of the many hands free
accessories available today.
3. Position your wireless phone within easy reach. Be able
to access your wireless phone without removing your
eyes from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice and
even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while
driving. Jotting down a "to do" list or flipping through
your address book takes attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary.
If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then
continue.
Section 13: Health and Safety Information
213
7. Do not engage in stressful or emotional conversations
that may be distracting. Make people you are talking
with aware you are driving and suspend conversations
that have the potential to divert your attention from the
road.
8. Use your wireless phone to call for help. Dial 9-1-1 or
other local emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it is a free
call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1
or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see
a broken-down vehicle posing no serious hazard, a
broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen,
call roadside assistance or other special non-emergency
number.
"The wireless industry reminds you to use your phone safely
when driving."
Formoreinformation,pleasecall1-888-901-SAFE,orvisit
our web-site www.wow-com.com
Provided by theCellularTelecommunications& Internet
Association.
214
Operating Environment
Operating Environment
Remember to follow any special regulations in force in
any area and always switch your phone off whenever it
isforbiddentouseit,orwhenitmaycauseinterferenceor
danger. When connecting the phone or any accessory to
another device, read its user's guide for detailed safety
instructions. Do not connect incompatible products.
Aswithothermobileradiotransmittingequipment,users
are advised that for the satisfactory operation of the
equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over
your shoulder if you are using an external antenna).
Using Your Phone Near Other Electronic Devices
Mostmodernelectronicequipmentisshieldedfromradio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker.
These recommendations are consistent with the
independent research and recommendations of Wireless
Technology Research.
Section 13: Health and Safety Information
215
Persons with pacemakers:
• should always keep the phone more than 15 cm (6 inches) from
their pacemaker when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Other Medical Devices
Ifyouuseanyotherpersonalmedicaldevices,consultthe
manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information.Switchyourphoneoffinhealthcarefacilities
whenanyregulationspostedintheseareasinstructyouto
do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consultthemanufacturerofanyequipmentthathasbeen
added to your vehicle.
Posted Facilities
Switchyourphoneoffinanyfacilitywherepostednotices
require you to do so.
216
Potentially Explosive Environments
Potentially Explosive Environments
Switchyourphoneoffwheninanyareawithapotentially
explosive atmosphere and obey all signs and
instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas),chemicalplantsorwhereblastingoperationsarein
progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below deck
on boats, chemical transfer or storage facilities, vehicles
using liquefied petroleum gas (such as propane or
butane), areas where the air contains chemicals or
particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
Emergency Calls
Thisphone,likeanywirelessphone, operatesusingradio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee
connectioninallconditions. Therefore, youshouldnever
rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember,tomakeorreceiveanycallsthephonemustbe
switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all
Section 13: Health and Safety Information
217
wireless phone networks or when certain network
services and/or phone features are in use. Check with
local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example),
youmayfirstneedtodeactivatethosefeaturesbeforeyou
can make an emergency call. Consult this document and
your local cellular service provider.
Whenmakinganemergencycall,remembertogiveallthe
necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off
the call until given permission to do so.
Restricting Children's access to your Phone
Yourphoneisnotatoy.Childrenshouldnotbeallowedto
play with it because they could hurt themselves and
others,damagethephoneormakecallsthatincreaseyour
phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in
close proximity to receiving equipment. The FCC can
218
Other Important Safety Information
require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane
orbutane)mustcomplywiththeNationalFireProtection
Standard (NFPA-58). For a copy of this standard, contact
the National Fire Protection Association, One
BatterymarchPark,Quincy,MA02269,Attn:Publication
Sales Division.
Cautions
Any changes or modifications to your phone not
expressly approved in this document could void your
warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries,
antennas and chargers. The use of any unauthorized
accessories may be dangerous and void the phone
warranty if said accessories cause damage or a defect to
the phone.
Althoughyourphoneisquitesturdy, itisacomplexpiece
ofequipmentandcanbebroken.Avoiddropping,hitting,
bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the
phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the
device.
• Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
Section 13: Health and Safety Information
219
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both
installed or portable wireless equipment in the area over the air
bag or in the air bag deployment area. If wireless equipment is
improperly installed and the air bag inflates, serious injury
could result.
• Switch your phone off before boarding an aircraft. The use of
wireless phone in aircraft is illegal and may be dangerous to
the aircraft's operation.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the offender, or
legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on
the signal strength in your area. Your phone informs you
of the current signal strength by displaying a number of
bars next to the signal strength icon. The more bars
displayed, the stronger the signal.
Ifyou'reinsideabuilding, beingnearawindowmaygive
you better reception.
Understanding the Power Save Feature
If your phone is unableto finda signal after 15 minutes of
searching, a Power Save feature is automatically
activated. If your phone is active, it periodically rechecks
service availability or you can check it yourself by
pressing any key.
Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your
phone returns to standby mode.
220
Availability of Various Features/Ring Tones
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver.
When it's turned on, it receives and transmits radio
frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This
power can range from 0.006 watts to 0.2 watts in digital
mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.
There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.
• If your phone is equipped with an external antenna, hold the
phone with the antenna raised, fully-extended and over your
shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing
the internal antenna could inhibit call performance.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the power
off and remove the battery. If it is inoperable, call Customer
Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and
may require additional subscription and/or usage
Section 13: Health and Safety Information
221
charges. Not all features are available for purchase or use
inallareas.DownloadableRingTonesmaybeavailableat
an additional cost. Other conditions andrestrictions may
apply. See your service provider for additional
information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone
usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating temperature,
features selected, frequency of calls, and voice, data, and
other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and
battery. If you suspect damage to the phone or battery, take it
to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses
less power; talk and standby time are greatly affected by the
signal strength on the cellular network and the parameters set
by the network operator.
• Follow battery usage, storage and charging guidelines found in
the user’s guide.
• Battery charging time depends on the remaining battery charge
and the type of battery and charger used. The battery can be
charged and discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and standby time)
is noticeably shorter than normal, it is time to buy a new
battery.
222
Battery Precautions
• If left unused, a fully charged battery will discharge itself over
time.
• Use only Samsung-approved batteries and recharge your
battery only with Samsung-approved chargers. When a
charger is not in use, disconnect it from the power source. Do
not leave the battery connected to a charger for more than a
week, since overcharging may shorten its life.
• Do not use incompatible cell phone batteries and chargers.
Some Web sites and second-hand dealers, not associated with
reputable manufacturers and carriers, might be selling
incompatible or even counterfeit batteries and chargers.
Consumers should purchase manufacturer or carrier
recommended products and accessories. If unsure about
whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
• Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity
and lifetime of the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged.
Li-ion batteries are particularly affected by temperatures below
0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as
on or near a cooking surface, cooking appliance, iron, or
radiator.
• Do not get your phone or battery wet. Even though they will dry
and appear to operate normally, the circuitry could slowly
corrode and pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can
occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and - terminals of the battery (metal
strips on the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
Section 13: Health and Safety Information
223
• Do not permit a battery out of the phone to come in contact with
metal objects, such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the
battery as this can cause an internal short-circuit, resulting in
overheating.
• Dispose of used batteries in accordance with local regulations.
In some areas, the disposal of batteries in household or
business trash may be prohibited. For safe disposal options for
Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a
fire.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years.
• Keep the phone and all its parts and accessories out of the
reach of small children.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving
parts may be damaged.
• Do not store the phone in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms
up to its normal operating temperature, moisture can form
inside the phone, which may damage the phone's electronic
circuit boards.
224
Care and Maintenance
• Do not drop, knock or shake the phone. Rough handling can
break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
• Do not paint the phone. Paint can clog the device's moving
parts and prevent proper operation.
• Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may explode
when overheated.
• If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized
antennas or modified accessories may damage the phone and
violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
Section 13: Health and Safety Information
225
226
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P.
("SAMSUNG") warrants to the original purchaser
("Purchaser") that SAMSUNG's Phones and accessories
("Products") are free from defects in material and
workmanship under normal use and service for the
period commencing upon the date of purchase and
continuingforthefollowingspecifiedperiodoftimeafter
that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
WhatisNotCovered?ThisLimitedWarrantyisconditioned
upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of
any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number
removedormadeillegible;(c)anyplasticsurfacesorother
externally exposed parts that are scratched or damaged
duetonormaluse;(d)malfunctionsresultingfromtheuse
of Product in conjunction with accessories, products, or
228
Standard Limited Warranty
ancillary/peripheral equipment not furnished or
approved by SAMSUNG; (e) defects or damage from
impropertesting,operation,maintenance,installation,or
adjustment; (f) installation, maintenance, and service of
Product, or (g) Product used or purchased outside the
United States or Canada. This Limited Warranty covers
batteries only if battery capacity falls below 80% of rated
capacity or the battery leaks, and this Limited Warranty
does not cover any battery if (i) the battery has been
chargedbyabatterychargernotspecifiedorapprovedby
SAMSUNG for charging the battery, (ii) any of the seals
onthebatteryarebrokenorshowevidenceoftampering,
or (iii)thebattery has been used in equipmentotherthan
the SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG's sole option, without charge to Purchaser,
any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must
return Product to an authorized phone service facility in
an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof
ofsaleshowingthedateofpurchase, theserialnumber of
Product and the sellers' name and address. To obtain
assistance on where to deliver the Product, call Samsung
Customer Care at 1-888-987-4357. Upon receipt,
SAMSUNG will promptly repair or replace the defective
Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components
when repairing any Product or replace Product with a
rebuilt, reconditioned or new Product. Repaired/
replaced leather cases, pouches and holsters will be
Section 14: Warranty Information
229
warranted for a period of ninety (90) days. All other
repaired/replacedProductwillbewarrantedforaperiod
equal to the remainder of the original Limited Warranty
ontheoriginalProductorfor90days,whicheverislonger.
All replaced parts, components, boards and equipment
shall become the property of SAMSUNG. If SAMSUNG
determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts,
shipping,andlaborchargesfortherepairorreturnofsuch
Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPTASSETFORTHINTHEEXPRESSWARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE
ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN
230
Standard Limited Warranty
EXPRESS WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE
BY OPERATION OF LAW, INCLUDING IF
APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO
THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME
STATES/PROVINCES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION
MAYNOTAPPLYTOYOU.INADDITION,SAMSUNG
SHALLNOTBELIABLEFORANYDAMAGESOFANY
KIND RESULTING FROM THE PURCHASE, USE, OR
MISUSE OF, OR INABILITY TO USE THE PRODUCT
OR ARISING DIRECTLY OR INDIRECTLY FROM THE
USE OR LOSS OF USE OF THE PRODUCT OR FROM
THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIALORSIMILARDAMAGES, ORLOSS
OF ANTICIPATED PROFITS OR BENEFITS, OR FOR
DAMAGES ARISING FROM ANY TORT (INCLUDING
NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR
EMPLOYEES, OR FOR ANY BREACH OF CONTRACT
OR FOR ANY CLAIM BROUGHT AGAINST
PURCHASER BY ANY OTHER PARTY. SOME STATES/
PROVINCES DO NOT ALLOW THE EXCLUSION OR
LIMITATIONOFINCIDENTALORCONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU. THIS
Section 14: Warranty Information
231
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
ANDYOUMAYALSOHAVEOTHERRIGHTS,WHICH
VARY FROM STATE TO STATE/PROVINCE TO
PROVINCE. THIS LIMITED WARRANTY SHALL NOT
EXTENDTOANYONEOTHERTHANTHEORIGINAL
PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY
PORTION OF THIS LIMITED WARRANTY IS HELD
ILLEGALORUNENFORCEABLEBYREASONOFANY
LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS
LIMITED WARRANTY WHICH PURCHASER
ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS
LIMITED AS THE LAW PERMITS. THE PARTIES
UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN
CONJUNCTION WITH THE PRODUCT. SAMSUNG
MAKES NO WARRANTIES OR REPRESENTATIONS
AND THERE ARE NO CONDITIONS, EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY
THIRDPARTY SOFTWARE OR EQUIPMENT,
WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT
DISTRIBUTED BY SAMSUNG OR OTHERWISE,
INCLUDING THE ABILITY TO INTEGRATE ANY
SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES,
OPERATIONS, PERFORMANCE AND SUITABILITY
232
Standard Limited Warranty
OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER
OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG's
Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited
Warranty. The agents, employees, distributors, and
dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make
additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written, do
not constitute warranties by SAMSUNG and should not
be relied upon.
Samsung Telecommunications America, L.P.
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2006SamsungTelecommunicationsAmerica.Allrights
reserved.
No reproduction in whole or in part allowed without
prior written approval. Specifications and availability
subject to change without notice.
Section 14: Warranty Information
233
234
Call Records
all calls 26
Index
A
call time 28
delete all 28
incoming calls 27
missed calls 26
outgoing calls 27
ABC Mode 46
Accessing a Menu Function
Alarm 128
Alert Type 101
Audio Player 118
B
Backlight
description 18
settings 98
Caller Group 60
Caller ID 106
Camcorder 139
recording video 144
Camera 139
taking photos 140
Change Password 108
Charging Battery 8
Battery
charging 8
installing 8
low indicator 10
removing 6
D
Dialing Display 99
Broadcast Messages 91
C
Calendar 129
Call Barring 104
Call Functions 21
adjusting the call volume 24
answering a call 24
call records 25
Display
backlight 18
icons 17
DTMF 32
E
Entering Text 45
changing text entry mode 46
using ABC mode 47
ending a call 22
making a call 22
using number mode 51
using symbol mode 51
using T9 mode 49
making a call from phone-
book 23
making a call using Wi-Fi 24
redialing last number 22
silent mode 29
F
Fun & Apps 111
Functions and Options 29
235
Multi-Party Call 34
dropping one participant 36
private conversation 35
setting up 35
Mute 32
My Files 112
G
Games 126
Get More Help 19
Getting Started 5
activating your phone 6
voicemail 11
H
My Name Card 63
My photos
Health and Safety Informa-
tion 199
accessing pictures 147
I
My Videos 149
N
Network Selection 105
Icon Descriptions 17
Image Editor 126
Instant Messaging 91
International Call 22
K
Network Services
call barring 104
call forwarding 103
call waiting 104
caller ID 106
Keypad Tone 101
L
Low Battery Indicator 10
M
Making a Call
network selection 105
Network Services Settings
Number Mode 46
O
On/Off Switch, Phone 10
from phonebook 23
Menu Navigation 37
menu outline 39
Message Settings 90
Message Tone 101
Messages 69
types of messages 70
Missed Call
viewing 26
Options
during a call 31
putting a call on hold 31
Organizer 128
alarm 128
calculator 135
calendar 129
stopwatch 137
236
timer 136
S
to do list 133
unit conversion 136
world time 135
Security 106
Sentbox 85
Settings 93
Own Number 64
sound settings 100
P
Shortcuts 38
SIM Card
Phone
features of your phone 14
icons 17
switching on/off 10
view of your phone 14
installing 6
Soft Keys 29
Phone Lock 107
Phone Settings 95
Speakerphone 32
Speed Dial
setting up entries 59
Standard Limited Warranty
Phonebook
finding a phonebook entry 57
finding my phone number 64
management 65
searching for a number 33
understanding your phone-
book 53
Stopwatch 137
Storing a Number
phone’s memory 54
SIM card 55
Phonebook Management 65
Picture Messages 75
Symbol Mode 46
T
PIN
T9 Mode 46
change 107
check 106
Templates 88
Text Input Mode
Privacy 108
changing 46
Push Message
Text Messages 72
Time & Date Settings 94
Timer 136
settings 91
viewing in inbox 83
R
Reset Settings 110
Ring Volume 100
Travel Adapter 8
Entering Text 155
exiting 154
237
navigating 154
U
Understanding Your Phone 13
V
changing number 12
Voice Messages 70
Voice Notes 70
Voice Recognition 119
VoiceSignal
digit dial 120
features 120
menu 119
name dial 121
name lookup 122
open applications 123
send text message 122
settings 124
W
Warranty Information 227
Wi-Fi
Settings 180
238
|