Samsung SGH t629 User Manual

SGH-t629  
P O R T A B L E Q u a d - B a n d  
T E L E P H O N E  
User Guide  
Please read this manual before operating your  
phone, and keep it for future reference.  
UVFG8_WB_t629_110106_F8  
©
2006Samsung TelecommunicationsAmerica, Inc. isaregistered  
trademark of Samsung Electronics America, Inc. and its related  
entities.  
Printed in Korea.  
GH68-11376A  
Openwave® is a registered Trademark of Openwave, Inc.  
RSA® is a registered Trademark RSA Security, Inc.  
Disclaimer of Warranties; Exclusion of Liability  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY  
CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH  
THEPRODUCT, THEPURCHASERTAKESTHEPRODUCT"AS  
IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED  
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT  
TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE  
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR  
ANY PARTICULAR PURPOSE OR USE; THE DESIGN,  
CONDITION OR QUALITY OF THE PRODUCT; THE  
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP  
OF THE PRODUCT OR THE COMPONENTS CONTAINED  
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE  
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR  
CONTRACT PERTAINING THERETO. NOTHING  
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE  
CONSTRUED TO CREATE AN EXPRESS OR IMPLIED  
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT  
TOTHEPRODUCT.INADDITION,SAMSUNGSHALLNOTBE  
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING  
FROM THE PURCHASE OR USE OF THE PRODUCT OR  
ARISING FROM THE BREACH OF THE EXPRESS WARRANTY,  
INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR  
BENEFITS.  
Table of Contents  
Table of Contents  
1
2
Table of Contents  
3
Section 1: Getting Started  
Topics Covered  
• Activating Your Phone  
• Switching the Phone On or Off  
• Setting Up Your Voice mail  
This section describes how to start using your phone by  
activating your service and setting up your Voice mail.  
Section 1: Getting Started  
5
   
Activating Your Phone  
When you subscribe to a cellular network, you are  
provided with a plug-in SIM card loaded with your  
subscription details, such as your PIN, any optional  
services available, and many others.  
Installing the SIM Card  
Important! The plug-in SIM card and its contacts can be easily damaged  
by scratching or bending, so be careful when handling, inserting, or  
removing the card.  
Keep all SIM cards out of reach of small children.  
1. If necessary, switch off the phone by holding down the  
key until the power-off image displays.  
2. If necessary, disconnect the Travel Adapter from the  
information.  
3. To remove the battery cover, press the ridged area on the  
battery cover using your thumb (1) and gently slide it in  
the direction of the arrow (2). Remove the battery cover.  
4. Grasp the top of the battery with your finger and lift up in  
the direction of the arrow. Remove the battery.  
6
     
Activating Your Phone  
5. Slide the SIM card into the SIM card socket so that the  
card locks into place. Make sure the gold contacts of the  
card face into the phone.  
Note: When you need to remove the SIM card, slide it, as shown, and take  
it out of the socket.  
Section 1: Getting Started  
7
6. Place the battery so that the 3 brass tabs on the end  
align with the 3 brass prongs at the bottom of the battery  
compartment (1). The arrow on the battery should be  
pointing down. Press the battery down until it clicks into  
place (2).  
7. Replace the battery cover. Make sure that the battery is  
properly installed before switching on the phone.  
Charging a Battery  
Your phone is powered by a rechargeable Li-ion battery.  
A Travel Adapter comes with your phone for charging  
8
       
Activating Your Phone  
the battery. Use only approved batteries and chargers.  
Ask your local Samsung dealer for further details.  
You can use the phone while the battery is charging, but  
doing so will require additional charging time.  
Note: You must fully charge the battery before using your phone for the  
first time. A discharged battery recharges fully in approximately 2 hours.  
1. With the battery in position in the phone, plug the  
connector of the Travel Adapter into the jack on the side  
of the phone.  
Note: The following illustration is the incorrect method for connecting the  
charger. If attempted, damage to the accessory port will occur therefore  
voiding the phone’s warranty.  
Section 1: Getting Started  
9
2. Plug the adapter into a standard AC wall outlet.  
Note: For connection to an electrical supply not located in the U.S., you  
must use an adaptor of the proper configuration for the power outlet. Use  
of the wrong adapter could damage your phone and void your warranty.  
3. When charging is finished, unplug the Travel Adapter  
from the power outlet and disconnect it from the phone.  
Important!: You must unplug the Travel Adapter before you remove the  
battery from the phone during charging; otherwise, the phone could be  
damaged.  
Low Battery Indicator  
When the battery is weak and only a few minutes of  
talk time remain, a warning tone sounds and the  
Warning low battery” message repeats at regular  
intervals on the display. When this happens, your  
phone turns off the backlight to conserve the remaining  
battery power.  
When the battery level becomes too low, the phone  
automatically turns off.  
10  
 
Switching the Phone On or Off  
Switching the Phone On or Off  
1. Slide the phone open.  
2. Press and hold the  
key until the phone switches on.  
3. If the phone asks for a PIN, enter the PIN and press the  
OK soft key or the  
key. For further details, see “PIN  
The phone searches for your network and after finding  
it, the name of your service provider appears on your  
display. Now, you can make or receive calls.  
Note: The display language is preset to English at the factory. To change  
the language, use the Language menu. For further details, see  
4. When you wish to switch off the phone, press and hold  
the  
key until the power-off image displays.  
Setting Up Your Voice mail  
For new users, follow the instructions below to set up  
Voice mail:  
1. Slide your phone open to access the keypad.  
2. In Idle mode, press and hold the  
key on the keypad.  
3. Follow the tutorial to create a password, a greeting, and  
your name.  
Note: These steps may be different depending on your network.  
Section 1: Getting Started  
11  
           
Accessing Your Voice mail  
You can access your Voice mail by pressing and holding  
the  
key on the keypad or by going to the menu. To  
access Voice Mail using the menu:  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Highlight Messages and press the Select soft key or the  
key.  
3. Highlight Voice mail and press the Select soft key or the  
key.  
4. Highlight Call voice mail and press the OK soft key or  
the  
key. Your phone dials the specified voice mail  
number. When connected, follow the voice prompts from  
the Voice mail center.  
Changing the Voice mail Number  
Your SIM card gives you the default service number of  
the Voice mail center. However, should you need to  
change the number or add a second Voice server  
number, use the following procedures:  
1. In Idle mode, press the Menu soft key to access the  
Menu mode.  
2. Highlight Messages and press the Select soft key or the  
key.  
3. Highlight Voice mail and press the Select soft key or the  
key.  
4. Highlight Voice server number and press the OK soft  
key or the  
key. Highlight Voice mail and press the  
OK soft key.  
12  
   
Setting Up Your Voice mail  
5. Edit the number, then press the OK soft key. The number  
will be saved.  
6. Press the  
key to return to Idle mode.  
Section 1: Getting Started  
13  
14  
Section 2: Understanding Your Phone  
Topics Covered  
• Features of Your Phone  
• View of Your Phone  
• Keys  
• Display Layout  
• Get More Help  
This section outlines some key features of your phone. It  
also describes the screen and the icons that are displayed  
when the phone is in use.  
Section 2: Understanding Your Phone  
15  
   
Features of Your Phone  
Your phone is lightweight, easy-to-use and offers many  
significant features. The following list outlines a few of  
the features included in your phone.  
1.3 Megapixel Camera and Camcorder  
Bluetooth® Wireless Technology  
Instant Messaging capability  
Voice Recognition capability  
Multimedia capability  
Fun & Apps feature provides my file, music player, games,  
alarms, calendar, task list, calculator, world time, unit  
conversion, timer, and stopwatch.  
View of Your Phone  
The following illustrations show the main elements of  
your phone:  
16  
       
Keys  
Keys  
The following list correlates to the illustrations.  
1. Used to listen to audio from your phone.  
2. During a call, adjusts the earpiece volume.  
In Idle mode with the phone open, adjusts the ring  
volume. With the phone closed, turns on the external  
display when held down.  
When receiving a call with the phone open or closed,  
mutes the ringer and can reject the call to Voice mail.  
3.  
Performs the functions indicated by the screen text on  
the bottom line of the display.  
4. OK/Select key. In Menu mode, selects the highlighted  
menu options.  
When the Left soft key shows Options, it is the  
short-cut key to select the first option in the options list.  
5. Makes or answers a call.  
In Idle mode, recalls the last number dialed or received  
when held down.  
6. In Idle mode, accesses Voice mail when held down.  
7. Enters special characters. Performs various functions.  
8. The microphone used during phone calls and Voice note  
recordings.  
9. Enters numbers, letters, and some special characters.  
10. The Cancel key deletes characters from the display.  
In Menu mode, it returns you to the previous menu level.  
Section 2: Understanding Your Phone  
17  
 
11. Ends a call. Also switches the phone on and off when  
held down.  
In Menu mode, cancels your input and returns the phone  
to Idle mode.  
12. Press to launch the camera/camcorder.  
13. In Menu mode, scrolls through the menus and  
Phonebook.  
In Idle mode:  
Up key: allows you to access the Camera or Camcorder  
feature directly.  
Down key: allows you to access your Contact list directly.  
Left key: allows you to access Text messaging directly.  
Right key: allows you to access Voice notes recording  
directly.  
When entering text, moves the cursor to the left or right,  
depending on which side you press.  
14. Display area where text and graphics are displayed.  
18  
Keys  
15. Micro SD memory card slot. This expansion slot allows  
you to insert a micro SD memory card to add additional  
memory and storage capacity.  
16. The external speaker used for the speakerphone and to  
hear audio during a video playback.  
17. The headset jack is used for the hands-free headset.  
Plug your battery charger cable or your USB cable here.  
18. Lens used to take photos and record video.  
Section 2: Understanding Your Phone  
19  
Display Layout  
The display has 4 areas:  
Icons  
Shows the received signal strength. The greater the  
number of bars, the stronger the signal.  
Appears when a micro SD memory card has been  
inserted.  
Appears when a new text message has been received.  
Appears when a new Voice mail has been received.  
Appears when a new multimedia message has been  
received.  
Appears when you set an alarm to ring at a specified time.  
For details, see page “Alarm” on page 144.  
Appears when you are out of your service area.  
Appears when a call is in progress.  
Appears when the Call Forwarding feature is active. For  
20  
   
Display Layout  
Appears when Alert type is vibration or you set the phone  
to vibrate when you receive a call.  
When setting up from silent mode to vibration.  
When setting up from silent mode to mute.  
Shows the level of your battery. The more bars you see,  
the more power you have remaining.  
Appears when Bluetooth wireless technology is active.  
Backlight  
The backlight illuminates the display and the keypad.  
When you press any key or open the phone, the  
backlight turns on. It goes off when no keys have been  
pressed within a given period of time, depending on  
the setting in the Backlight menu.  
The On setting is how long the keypad backlight is on.  
You can select 15 seconds, 30 seconds, 1 minute, 3  
minutes, or 10 minutes.  
The Dim option is how much longer after the keypad  
backlight goes off that the display remains lit. You can  
select Off, 15 seconds, 30 seconds, 1 minute, or 3  
minutes.  
To specify your Backlight settings:  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Settings icon.  
Press the Select soft key or the  
key to enter the  
menu.  
Section 2: Understanding Your Phone  
21  
 
3. Highlight the Display settings option and press the  
Select soft key or the key.  
4. Highlight the Backlight option and press the Select soft  
key or the key.  
5. Highlight the On option. Use the Left or Right Navigation  
key to select the time that the backlight is on. You may  
choose between 15 seconds, 30 seconds, 1 minute, 3  
minutes, or 10 minutes.  
6. Press the Down key to take you to the Dim option. Use  
the Left or Right Navigation key to select the time that  
Dimming mode is on. You may choose between Off, 15  
seconds, 30 seconds, 1 minute, or 3 minutes.  
7. Press the Save soft key to save your settings.  
Get More Help  
Get More Help is designed to show you some of the  
features of your phone using t-zones. You can search  
help files on the fly while traveling, at home or  
anywhere, using help.wap.t-mobile.com.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Get More Help  
icon. Press the Select soft key or the  
key.  
3. You will enter t-zones and the Get More Help menu will  
be displayed.  
The following options are available:  
Browse Help Topics: this option gives you a list of different  
topics that you can select.  
22  
   
Get More Help  
Enter a Search: this option allows you to enter a keyword to  
search on.  
About: this option offers general information about Get More  
Help including concept and site design, copyright information,  
and contact email address.  
To access the browser options menu:  
1. Press the Menu soft key to see the Browser Options.  
2. Make a selection and press the Select soft key or the  
key.  
Note: The menus may vary, depending on your t-zones subscription.  
For more information on browser options, see  
Section 2: Understanding Your Phone  
23  
24  
Section 3: Call Functions  
Topics Covered  
• Making a Call  
• Adjusting the Call Volume  
• Answering a Call  
• Call Records  
• Silent Mode  
• Selecting Functions and Options  
This section describes how to make or answer a call. It  
also includes information on the features and  
functionality associated with making or answering a  
call.  
Section 3: Call Functions  
25  
   
Making a Call  
When the Idle screen displays, enter the number you  
wish to dial and press the  
key.  
Note: When you activate the Auto redial option in the Extra settings menu,  
the phone will automatically redial up to 10 times when the person does  
not answer the call or is already on the phone, provided your call is not sent  
Making an International Call  
1. Press and hold the  
key. The + character appears.  
2. Enter the country code, area code, and phone number  
and press the  
key.  
Correcting the Number  
1. To clear the last digit displayed, press the  
key.  
2. To clear any other digit in the number, press the Left or  
Right navigation key until the cursor is immediately to  
the right of the digit to be cleared. Press the  
can also enter a missing digit.  
key. You  
3. To clear the whole display, press and hold the  
key.  
Voice Dialing a Call  
Your phone includes VoiceSignal advanced speech  
recognition software that can be used to activate a  
wide-variety of functions on your phone. You can  
use VoiceSignal to make calls by speaking a number  
(digit dialing) or by speaking the name of a contact  
in your Phonebook. See Voice recognition” on page  
136 for more information.  
26  
       
Making a Call  
Ending a Call  
When you want to finish your call, briefly press the  
key.  
Redialing the Last Number  
The phone stores the numbers of the calls you’ve  
dialed, received, or missed if the caller is identified.  
To recall any of these numbers:  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Call records  
icon. Press the Select soft key or the  
key to enter  
the menu.  
Note: You can also access the call records of all calls, missed calls,  
incoming calls, and outgoing calls by pressing the  
key in Idle mode.  
3. Select All calls and press the Select soft key or the  
key.  
4. Use the Up and Down keys to scroll through the  
numbers and highlight the number you want.  
5. To dial the number, press the  
key.  
Before you dial the number, you may press the Options  
soft key for the following options:  
Details: Displays details of the number including name,  
number, and dates and times of calls.  
Call back: Places a call back to the number.  
Send message: Allows you to send a Text message,  
Picture message, or Voice note to the number.  
Section 3: Call Functions  
27  
   
Save to phonebook: Stores the number in your  
phonebook. Choose from New contact or Existing contact.  
Delete: Allows you to delete the Selected call record or All call  
records.  
Making a Call from the Phonebook  
You can store phone numbers that you use regularly on  
the SIM card or in the phone’s memory. These entries  
are collectively called the Phonebook.  
Once you have stored a number in the Phonebook, you  
can dial it by pressing a few keys. You can also assign  
your most frequently-used numbers to number keys  
using the Speed Dial feature.  
For further details about the Phonebook feature, see  
Adjusting the Call Volume  
During a call, if you want to adjust the earpiece  
volume, use the Volume keys on the left side of the  
phone.  
Press the key to increase the volume level and the  
key to decrease the level.  
Muting Ringer and Rejecting Calls  
When receiving a call, if you want to mute the ringer  
without answering the call, press either volume key.  
To reject a call and send it immediately to Voice mail,  
press and hold either of the volume keys.  
28  
       
Answering a Call  
Adjusting Ringer Volume  
In Idle mode, you can also adjust the ring volume using  
these keys while the phone is open.  
Answering a Call  
When somebody calls you, the phone rings and  
displays the incoming call image.  
The caller’s phone number, or name if stored in  
Phonebook, displays.  
1. If necessary, slide open the phone. Press the  
key or  
the Accept soft key to answer the incoming call.  
If the Anykey answer option in the Extra settings menu  
is activated, you can press any key to answer a call  
except for the  
key and the Reject soft key.  
Note: To reject an incoming call, press the Reject soft key or  
key.  
Note: You can reject a call with your phone closed by pressing the volume  
key on the side of the phone.  
Section 3: Call Functions  
29  
   
2. End the call by closing the phone or pressing the  
key.  
Note: You can answer a call while using the Phonebook or menu features.  
After answering the call, the phone returns to the function screen you were  
using.  
Call records  
All incoming, outgoing and missed calls are listed in  
the Call records. You can also view Call time.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Call records  
icon. Press the Select soft key or the  
key to enter  
the menu.  
Note: You can also access the call records of all calls, missed calls,  
incoming calls, and outgoing calls by pressing the  
key in Idle mode.  
The following Call records options are available:  
All calls  
This menu lets you view the 90 most recent calls you  
received, sent, and missed.  
The number or name, if already stored in your  
Phonebook, displays with the number of occurrences of  
each number.  
Note: at any time while you are in Call records, you may use the Left or  
Right Navigation key to scroll between All calls, Missed calls, Incoming  
calls, and Outgoing calls.  
30  
     
Call records  
Missed calls  
This menu lets you view the 30 most recent calls you  
received, but did not answer.  
The number and name, if already stored in your  
Phonebook, displays with the number of occurrences of  
each number.  
Viewing Missed calls without Using the Menu  
When you are unable to answer a call for any reason,  
you can find out who is calling you, if this service is  
available, so that you can call the person back.  
The number of calls you have missed displays on the  
idle screen immediately after a call is missed.  
To view a missed call immediately:  
1. If the phone is closed, slide the phone open.  
2. Press the View soft key.  
The number corresponding to the most recent missed  
call displays, if available.  
3. To scroll through the missed calls, press the Up or Down  
Navigation key.  
4. To call the number displayed, press the  
key.  
5. Press the Options soft key for the following options:  
Detail: Displays details of the number including name,  
number, and dates and times of calls.  
Call back: Places a call back to the number.  
Send message: Allows you to send a Text message,  
Picture message, or Voice note to the number.  
Save to phonebook: Stores the number in your  
phonebook. Choose from New contact or Existing contact.  
Section 3: Call Functions  
31  
   
Delete: Allows you to delete the Selected call record or All call  
records.  
You can press the  
key at any time to exit the Missed  
calls feature.  
Incoming calls  
This menu lets you view the 30 most recent calls you  
received.  
The number and name, if already stored in your  
Phonebook, displays with the number of occurrences of  
each number.  
Outgoing calls  
This menu lets you view the 30 most recent calls you  
dialed.  
The number and name, if already stored in your  
Phonebook, displays with the number of occurrences of  
each number.  
Delete all  
This menu allows you to delete all of the records in  
each call record separately, or you can delete all of your  
call records at one time.  
1. Highlight the type of calls you want to delete and press  
the  
key to make a check mark.  
2. Press the Delete soft key to delete the calls.  
3. When a confirmation message displays, press the Yes  
soft key or  
key to confirm.  
32  
     
Call records  
Call time  
This menu lets you view the time log for calls made and  
received.  
Note: The actual time invoiced by your service provider may differ from  
times displayed due to network features and service plan.  
The following time logs are available:  
Last call time: shows the length of your last call.  
Total incoming: shows the total length of all calls you have  
received since the timer was last reset.  
Total outgoing: shows the total length of all calls you have  
made since the timer was last reset.  
Life time: shows the total length of time for incoming and  
outgoing calls. The length of call time must be at least 1 minute  
to increment this field. This information cannot be cleared.  
To reset a call timer:  
1. Use the Up or Down navigation key to highlight the timer  
you want to reset.  
2. Press the Reset soft key. Enter the phone password and  
then press the OK soft key or  
key.  
Note: The password is preset to “00000000” at the factory. To change this  
Section 3: Call Functions  
33  
 
Silent mode  
Silent mode is convenient when you wish to stop the  
phone from making noise, in a theater for example.  
In Idle mode, press and hold the  
key until the  
“Silent mode on” message and the Silent mode icon  
display.  
In Silent mode, instead of sounds, your phone will  
vibrate. You can set how the phone acts to alert you to a  
specific event while in Silent mode. See “Silent mode”  
To exit and reactivate the previous sound settings, press  
and hold the  
key again until “Exit silent mode”  
message appears. The Silent mode icon no longer  
displays.  
Selecting Functions and Options  
Your phone offers a set of functions that allow you to  
customize it. These functions are arranged in menus  
and sub-menus, accessed using the two soft keys. Each  
menu and sub-menu allows you to view and alter the  
settings of a particular function.  
Soft Keys  
The roles of the soft keys vary depending on the  
function you are currently using. The labels on the  
bottom line of the display just above each key indicate  
their current role.  
34  
         
Selecting Functions and Options  
Press the Right soft  
Press the Left soft key  
for Menu mode.  
key to access the  
t-zones menu.  
Selecting Options  
To view the various functions and options available  
and to select the one you want:  
1. Press the appropriate soft key.  
2. To select the function displayed or the option highlighted,  
press the Select soft key or the  
key.  
3. To view the next function or highlight the next option on a  
list, press the Down Navigation key.  
4. To move back to the previous function or option on a list,  
press the Up key.  
5. To move back up one level in the menu structure, press  
the Back soft key.  
6. To exit the menu structure without changing the  
settings, press the  
key.  
When you access a list of options, your phone  
highlights the currently active option. If, however,  
Section 3: Call Functions  
35  
there are only two options, such as On/Off or Enable/  
Disable, your phone highlights the option that is not  
currently active, so that you can select it directly.  
Options During a Call  
Your phone provides a number of control functions that  
you can use during a call.  
Switch to phone/Switch to headset (Bluetooth only)  
You can use this option to switch between using your  
Bluetooth headset and using your phone’s earpiece and  
microphone without interrupting the call in progress.  
Tip: This option is handy if your Bluetooth headset battery is running low  
on talk power or is experiencing interference.  
Note: This option does not appear when you are not using your Bluetooth  
headset.  
To switch from using your Bluetooth headset:  
1. While in a call, press the Options soft key and highlight  
the Switch to phone option.  
2. Press the Select soft key or the  
key. A message is  
displayed. You can now talk with the other person using  
your phone’s microphone and earpiece.  
To switch to using your Bluetooth headset:  
1. While in a call, press the Options soft key and highlight  
the Switch to headset option.  
2. Press the Select soft key or the  
key. A message is  
displayed. You can now talk with the other person using  
your Bluetooth headset.  
36  
 
Selecting Functions and Options  
Switching off the Microphone (Mute)  
You can temporarily switch your phone’s microphone  
off, so that the other person cannot hear you.  
Example: You wish to say something to a person in the room but do not  
want the person on the phone to hear you.  
To switch the microphone off temporarily:  
1. Press the Options soft key and highlight the Mute  
option.  
2. Press the Select soft key or the  
key. The other  
person can no longer hear you. The Mute icon is  
displayed.  
To switch the microphone back on:  
1. Press the Options soft key and highlight the Unmute  
option.  
2. Press the Select soft key or the  
key. The other  
person can hear you again.  
Putting a Call on Hold  
You can place the current call on hold whenever you  
want. You can make another call while you have a call  
in progress if your network supports this service.  
To place a call on hold, simply press the Options soft  
key, highlight the Hold call option, then press the  
Select soft key or the  
key. You can reactivate the  
call whenever you want, by pressing the Resume soft  
key.  
To make a call while you have a call in progress:  
1. Enter the phone number that you wish to dial or look it  
Section 3: Call Functions  
37  
   
up in the Phonebook.  
2. Press the key to dial the second call.  
The first call is automatically put on hold.  
Or:  
1. Press the Options soft key and select Hold call.  
2. Make the second call in the normal way.  
When you have an active call and a call on hold, you  
may switch between the two calls, changing the one on  
hold to active and placing the other on hold.  
To switch between the two calls, simply press the  
Options soft key and select Swap.  
The current call is placed on hold and the call on hold is  
reactivated so that you can continue conversing with  
that person.  
When you want to finish, end each call normally by  
pressing the  
key.  
Muting or Sending Key Tones  
These options allow you to turn the key tones off or on.  
If the Mute keys option is selected, your phone does  
not transmit the DTMF (Dual Tone Multi-Frequency)  
tones of the keys, which allows you to press keys  
without hearing annoying key tones during a call.  
Note: To communicate with answering machines or computerized  
telephone systems, the Send keys option must be selected.  
38  
 
Selecting Functions and Options  
Making a Multi-Party Call  
A multi-party call is a network service that allows up to  
six people to take part simultaneously in a multi-party  
or conference call.  
Note: The number of callers is Network Dependent, so this number may  
vary.  
For further details about subscribing to this service,  
contact your service provider.  
Setting up a Multi-Party Call  
1. Call the first participant in the normal way.  
2. Call the second participant in the normal way. The first  
call is automatically put on hold.  
3. To join the first participant to the multi-party call, press  
the Options soft key or the  
key and select Join.  
Press the Select soft key or the  
key.  
4. To add a new person to the multi-party call, call the new  
person in the normal way and then press the Options  
soft key or the  
the Select soft key or the  
You can add incoming callers by answering the call and  
key. Select the Join option and press  
key.  
pressing the Options soft key or the  
key, and  
selecting Join. Repeat as required.  
Having a Private Conversation With One Participant  
1. Press the Options soft key or the  
the Split option. Press the Select soft key or the  
key.  
key and highlight  
The list of call participants appears.  
Section 3: Call Functions  
39  
     
2. Highlight a person you wish to talk privately with by  
pressing the Up or Down Navigation key, and press the  
Select soft key or the  
key.  
Now you can talk only to that person. The other  
participants can continue to converse with each other.  
3. To return to the multi-party call, press the Options soft  
key or the  
key and select Join. Press the Select  
soft key or the  
key.  
All of the multi-party call participants can now hear each  
other.  
Dropping One Participant  
1. Press the Options soft key and highlight Split or  
Remove.  
The list of call participants appears.  
2. Highlight the person you want to remove or separate  
from the call and press the OK soft key.  
Searching for a Number in Phonebook  
You can search for a number in the Phonebook during a  
call.  
1. Press the Options soft key.  
2. Press the Down key to highlight the Phonebook option  
and press the Select soft key or the  
key.  
The Phonebook menu appears in the display.  
3. Press the Down key to highlight the Contact list option  
and press the Select soft key or the  
key.  
The Contact list screen appears in the display.  
40  
   
Selecting Functions and Options  
4. Enter the name that you wish to find in the textbox  
located above the entries. If you enter the first few letters  
of the name, the Phonebook entries are listed starting  
with the first entry matching your input.  
Or, use the Up or Down Navigation key to highlight the  
contact that you desire.  
5. To view the highlighted entry, press the Options soft key.  
6. Highlight the View option and press the Select soft key  
or the  
key. The Contact is displayed.  
7. Press the  
key to dial the call.  
For further details about the Phonebook feature, see  
Send DTMF  
You can use the Send DTMF option to send a key  
string or number during a phone call. For example, you  
can send a calling card number by DTMF while on a  
call.  
1. Press the Options soft key.  
2. Highlight the Send DTMF option and press the Select  
soft key or the  
key.  
3. Enter a number and press the OK soft key. The number is  
sent.  
Message  
This option causes the Messages menu to appear in the  
display. You can use this option to send, receive, and  
review text and picture messages. See “Section 7:  
Messages” on page 75 for more information.  
Section 3: Call Functions  
41  
Menu  
This option places your phone in main menu mode  
without interrupting the call in progress. You can use  
this option to access many of your phone’s features  
during a call.  
Using the Speakerphone  
While on a call, you can use your Speakerphone by  
following these steps:  
1. Press the Spkr on soft key to turn the Speakerphone on.  
2. To turn the Speakerphone off, press the Spkr off soft  
key.  
Call Waiting  
You can answer an incoming call while you have a call  
in progress, if this service is supported by the network  
and you have set the Call waiting menu to Activate.  
You are notified of an incoming call by a call waiting  
information on setting up Call waiting.  
To answer a call while you have a call in progress:  
1. Press the Accept soft key or the  
key to answer the  
incoming call. The first call is automatically put on hold.  
2. To switch between the two calls, press the Options soft  
key, highlight Swap and press the Select soft key or the  
key.  
To end a call on hold, press the Options soft key and  
select the End held call option. Then press the Select  
soft key or the  
key.  
To end the current call, press the  
key.  
42  
   
Section 4: Menu Navigation  
Topics Covered  
• Menu Navigation  
• Menu Outline  
This section explains the menu navigation for your  
phone. It also includes an outline of all the available  
menus associated with your phone.  
Section 4: Menu Navigation  
43  
   
Menu Navigation  
You can tailor the phone’s range of functions to your  
needs using menus and sub-menus. Menus and sub-  
menus can be accessed by scrolling using the  
Navigation keys or by using the shortcuts.  
Accessing a Menu Function by Scrolling  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Scroll using the Navigation keys to reach a main menu,  
Settings for example. Press the Select soft key or the  
key to enter the menu.  
3. If the menu contains sub-menus, Security for example,  
you can access them by pressing the Select soft key or  
the  
key after the sub-menu has been highlighted.  
If the menu that you have selected contains further  
options, repeat this step.  
4. To scroll through the menus, press the Up or Down  
Navigation keys.  
5. To confirm the chosen setting, press the Select soft key,  
or the  
6. To return to the previous menu level, press the Back soft  
key, or the key.  
key.  
7. To exit the menu without changing the settings, press the  
key.  
44  
   
Menu Outline  
Using Shortcuts  
The menu items, such as menus, sub-menus, and  
options, are numbered and can be accessed quickly by  
using their shortcut numbers. For the main menus, you  
can access any one of them by pressing the number  
keys (1 to *) corresponding to their location on the  
screen.  
Example: Accessing the Security menu.  
1. Press the Menu soft key.  
2. Press the  
key for Settings.  
3. Press the  
key for Security.  
Menu Outline  
The following list shows the menu structure and  
indicates the number assigned to each option.  
Note: If you use a SIM-AT card that provides additional services, the Fun &  
Apps menu displays when you press Menu 6 for Applications. For further  
details, see your SIM card instructions.  
1
2
Voice notes  
Call records  
2.1 All calls  
2.2 Missed calls  
2.3 Incoming calls  
2.4 Outgoing calls  
2.5 Delete all  
Section 4: Menu Navigation  
45  
     
2.6 Call time  
3
t-zones  
3.1 Home  
3.2 Go to URL  
3.3 Bookmarks  
3.4 Saved pages  
3.5 History  
3.6 Clear cache  
4
5
Instant Messaging  
Messages  
5.1 Create new  
5.1.1  
5.1.2  
5.1.3  
Text message  
Picture message  
Voice note  
5.2 Inbox  
5.3 Sentbox  
5.4 Outbox  
5.5 Drafts  
5.6 Templates  
5.6.1  
Text templates  
5.6.2  
Picture message templates  
5.7 Voice mail  
5.7.1  
Call voice mail  
5.7.2  
Voice server number  
5.8 Delete all  
5.9 Settings  
5.9.1  
Text message  
5.9.2  
Picture message  
46  
Menu Outline  
5.0 Broadcast messages*  
5.0.1  
5.0.2  
5.0.3  
Receive  
Channel  
Language  
5.* Memory status  
6
Fun & Apps  
6.1 My Files  
6.1.1  
6.1.2  
6.1.3  
6.1.4  
6.1.5  
6.1.6  
6.1.7  
Sounds  
Images  
Videos  
Music  
Other files  
Memory card**  
Memory status  
6.2 Games  
6.2.1  
6.2.2  
Get More Games  
My games  
6.3 Music player  
6.4 Camera  
6.4.1  
6.4.2  
6.4.3  
6.4.4  
6.4.5  
6.4.6  
Take and send  
Record video  
My photos  
My videos  
My Album  
My Journal  
6.5 Voice recognition  
6.6 Organizer  
6.6.1  
6.6.2  
6.6.3  
6.6.4  
6.6.5  
Alarm  
Calendar  
Tasks  
Calculator  
World time  
Section 4: Menu Navigation  
47  
6.6.6  
6.6.7  
6.6.8  
Unit conversion  
Timer  
Stopwatch  
7
8
Get More Help  
Phonebook  
8.1 Add new contact  
8.2 Contact list  
8.3 Group  
8.4 Speed dial  
8.5 My name card  
8.6 Own number  
8.7 FDN list  
8.8 Management  
8.8.1  
8.8.2  
8.8.3  
8.8.4  
8.8.5  
Default saving  
Copy all to  
Sort by contacts  
Delete all  
Memory status  
9
Settings  
9.1 Time & Date  
9.2 Phone settings  
9.2.1  
9.2.2  
9.2.3  
9.2.4  
9.2.5  
Language  
Greeting message  
Slide settings  
Extra settings  
Airplane mode  
9.3 Display settings  
9.3.1  
9.3.2  
9.3.3  
Wallpaper  
Info display  
Interior display  
48  
Menu Outline  
9.3.4  
9.3.5  
9.3.6  
9.3.7  
9.3.8  
Brightness  
Backlight  
Dialing display  
Calendar  
Show caller Information  
9.4 Sound settings  
9.4.1  
9.4.2  
9.4.3  
9.4.4  
9.4.5  
9.4.6  
9.4.7  
Incoming call  
Keypad tone  
Message tone  
Power on/off  
Slide tone  
Silent mode  
Extra tones  
9.5 Bluetooth  
9.5.1  
9.5.2  
9.5.3  
9.5.4  
9.5.5  
9.5.6  
9.5.7  
Turn Bluetooth On/Off  
My devices  
My visibility  
My phone name  
Security modes  
Features  
Help  
9.6 Network services  
9.6.1  
9.6.2  
9.6.3  
9.6.4  
9.6.5  
Call forwarding  
Call barring*  
Call waiting  
Network selection*  
Caller ID  
9.7 Security  
9.7.1  
9.7.2  
9.7.3  
9.7.4  
9.7.5  
9.7.6  
9.7.7  
PIN check  
Change PIN  
Phone lock  
Change password  
Lock application  
FDN mode  
Change PIN2  
Section 4: Menu Navigation  
49  
9.8 Software update  
9.9 Reset settings  
* Shows only if supported by your SIM card.  
** Shows only if a memory card is inserted into the phone.  
50  
Section 5: Entering Text  
Topics Covered  
• Changing the Text Input Mode  
• Using ABC Mode  
• Using T9 Mode  
• Using Number Mode  
• Using Symbol Mode  
This section outlines how to select the desired text input  
mode when entering characters into your phone. This  
section also describes how to use the T9 predictive text  
entry system to reduce the number of key strokes  
associated with entering text.  
Section 5: Entering Text  
51  
     
Changing the Text Input Mode  
When using your phone, you will often need to enter  
text, such as when storing a name in your Phonebook,  
creating your personal greeting or scheduling events on  
your calendar. You can enter alphanumeric characters  
by using your phone’s keypad.  
Your phone has the following text input modes:  
ABC mode: this mode allows you to enter letters by pressing  
the key labeled with the letter you want. How many times you  
press the key determines which letter or number appears.  
T9 mode: this mode allows you to enter words with only one  
keystroke per letter. Each key on the keypad has more than one  
letter; for example, pressing  
can enter J, K, or L. However,  
the T9 mode automatically compares the series of keystrokes  
you make with an internal linguistic dictionary to determine the  
most likely word, thus requiring far fewer keystrokes than the  
traditional ABC mode.  
Number mode: this mode allows you to enter numbers.  
Symbol mode: this mode allows you to enter symbols, such as  
punctuation marks.  
When you are in a field that allows characters to be  
entered, you will notice the text input mode indicator  
on the display.  
Example: Writing a text message.  
52  
             
Changing the Text Input Mode  
1. To change the text input mode, press the Right soft key.  
2. Each time you press the Right soft key, a different Text  
input mode indicator will be displayed at the lower right  
corner of your display.  
The following options are available:  
: T9 mode  
: ABC mode  
: Number mode  
: Symbol mode  
3. When the text input mode indicator that you desire is  
displayed, you may enter text in the text message box  
using the selected text input mode.  
Section 5: Entering Text  
53  
Using ABC Mode  
To use ABC mode, use the number keys to enter your  
text.  
1. Press the key labeled with the letter you want:  
Once for the first letter  
Twice for the second letter  
And so on  
2. Select the other letters in the same way.  
To enter periods or hyphens, press the  
key. ABC mode  
applies grammar rules to ensure that correct punctuation is  
used.  
To shift case in ABC mode, use the  
key. There are 3 cases:  
Initial capital, Capital lock, and Lower case.  
You can move the cursor by using the Navigation keys. To  
delete letters, press the  
to clear the display.  
key. Press and hold the  
key  
Note: The cursor moves to the right when you press a different key. When  
entering the same letter twice or a different letter on the same key, just  
wait for a few seconds for the cursor to move to the right automatically,  
and then select the next letter.  
Keys  
54  
     
Using ABC Mode  
Section 5: Entering Text  
55  
Using T9 Mode  
T9 is a predictive text input mode that allows you to  
key in any character using single keystrokes. This text  
input mode is based on a built-in dictionary.  
To enter a word in T9 mode:  
1. When you are in T9 mode, start entering a word by  
pressing the 2 to 9 keys. Press each key only once for  
each letter.  
Example: To enter “Hello” in T9 mode, press the 4, 3, 5, 5, and 6 keys.  
The word that you are typing appears on the display. It  
may change with each key that you press.  
2. Enter the whole word before editing or deleting the  
keystrokes.  
3. When the word displays correctly, go to step 4.  
If the word doesn’t display correctly, press the  
key  
to display alternative word choices for the keys that you  
have pressed.  
Example: Both “Of” and “Me” have the 6 and 3 keys. The phone displays  
the most commonly used choice first.  
4. Insert a space by pressing the  
key and start entering  
the next word.  
To add a new word into the T9 dictionary:  
1. After pressing the keys corresponding to the word you  
want to add, press the  
key to display the alternative  
words.  
56  
   
Using Number Mode  
2. When you press the  
key at the last alternative word,  
the display shows Add on the bottom line. Press the Add  
soft key or the key.  
3. Enter the word you want to add using ABC mode.  
4. Press the OK soft key or the key.  
The word is added to the T9 dictionary and becomes a  
word for the associated keypress series.  
Note: This feature may not be available for some languages.  
To enter periods, hyphens, or apostrophes, press the  
T9 mode applies grammar rules to ensure that correct  
punctuation is used.  
key.  
To shift case in T9 mode, use the  
key. There are 3 cases:  
Initial capital, Capital lock, and Lower case.  
You can move the cursor by using the Navigation keys. To delete  
letters, press the  
the display.  
key. Press and hold the  
key to clear  
Using Number Mode  
Number mode enables you to enter numbers into a text  
message. Press the keys corresponding to the digits you  
want to enter.  
Using Symbol Mode  
Symbol mode enables you to insert symbols and  
punctuation marks into text.  
1. To select a symbol, press the corresponding number key.  
2. To display more symbols, press the Up or Down  
Navigation key.  
Section 5: Entering Text  
57  
       
3. To clear the symbol(s), press the  
key. When the  
input field is empty, this key returns the display to the  
previous mode.  
4. To insert the symbol(s) into your message, press the OK  
soft key or the  
key.  
58  
Section 6: Understanding Your  
Phonebook  
Topics Covered  
• Storing a Number in the Phone’s Memory  
• Storing a Number in the SIM Card  
• Finding a Phonebook Entry  
• Speed Dialing  
• Editing a Caller Group  
• Copying all SIM Phonebook Entries  
• Deleting all of the Phonebook Entries  
• My Name Card  
• Finding My Own Phone Number  
• Add FDN List  
• Management  
This section describes how to manage your contacts by  
storing their name and number in your Phonebook. You  
can save phone numbers to your phone’s memory or to  
your SIM card.  
Section 6: Understanding Your Phonebook  
59  
     
Storing a Number in the Phone’s Memory  
The default for saving phone numbers to your  
phonebook is your phone’s memory. You can also save  
it to your SIM card or you can set your default so that  
whenever a new phonebook entry is created, you will  
be prompted to choose between Phone or SIM card.  
how to change this setting.  
Also, numbers that have been stored on your SIM card can  
be copied to your phone’s memory.  
Note: When you copy a phone number from your SIM card to your phone,  
the number will appear twice in your Contact list.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Phonebook icon.  
Press the Select soft key or the  
key to enter your  
Phonebook.  
3. The Add new contact option will be highlighted. Press  
the Select soft key or the key.  
4. Enter a first name in the Name text box. Tab to the next  
text box by pressing the Down key.  
For further details about how to enter characters, see  
“Using ABC Mode” on page 54.  
5. Enter a last name in the text box.  
6. Highlight a number Type by pressing the Up or Down  
Navigation key, then enter a number in the text box.  
The following types are available:  
60  
   
Storing a Number in the SIM Card  
Mobile: assigns the number entered to the Mobile entry.  
Home: assigns the number entered to the Home entry.  
Office: assigns the number entered to the Office entry.  
Fax: assigns the number entered to the Fax entry.  
Other: allows you to enter more detailed information for the  
entry.  
Email: assigns the address to the email entry.  
7. Continue to scroll down using the Down Navigation key  
to enter Picture ID, Ringtone, Group, and Memo if  
desired.  
8. Press the Save soft key. The number is saved to your  
phone and the new contact information is displayed.  
9. To return to the Idle screen, press the  
key.  
Storing a Number in the SIM Card  
The default for saving phone numbers to your  
phonebook is your phone’s memory. To store a number  
inyourSIMcard,youneedtochangetheDefaultSaving  
option first.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Phonebook  
icon. Press the Select soft key or the  
key to enter  
your Phonebook.  
3. Scroll to Management by pressing the Up or Down  
Navigation key and press the Select soft key or the  
key.  
4. Highlight Default saving and press the Select soft key  
or the  
key.  
Section 6: Understanding Your Phonebook  
61  
   
5. Highlight SIM card and press the Select soft key or the  
key.  
Note: You can also set the Default saving option to Ask on saving in the  
Management menu. With this option, you will be prompted for storage  
location each time you add a new contact. See “Default saving” on page  
73 for more information.  
Now that your phone is set up to store numbers to your  
SIM card, follow this procedure to store a number.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Phonebook icon.  
Press the Select soft key or the  
key to enter your  
Phonebook.  
3. Highlight the Add new contact option and press the  
Select soft key or the key.  
4. Enter a name in the Name text box. Move to the next text  
box by pressing the Down key.  
For further details about how to enter characters, see  
“Using ABC Mode” on page 54.  
Note: Contacts stored to your SIM card do not have first and last names as  
separate fields. Therefore, you will have to enter first and last name in the  
name field if so desired.  
5. Enter the phone number you want to store.  
6. Continue to scroll down using the Down Navigation key  
to enter Picture ID, Ringtone, and Group, if desired. To  
select one of these options, press the  
key.  
62  
Finding a Phonebook Entry  
7. When you are finished, press the Save soft key or the  
key. The number is saved in your SIM card.  
After storing, the phone displays the Phonebook entry  
you just created.  
8. Press the Options soft key for the following options:  
Edit: allows you to edit the name and number fields in the  
entry.  
Send message: allows you to send a message to the  
selected number. You may choose between Text message,  
Picture message, or Voice note.  
Call: allows you to call the number.  
Copy to phone: allows you to copy the number to your  
Phone  
Send name card via: allows you to send your name card  
via Text message, Picture message, or Bluetooth.  
Assign speed dial: allows you to assign a speed dial key  
number to the selected Phonebook entry.  
Delete: allows you to delete the name and number from  
Phonebook. You are asked to confirm that you wish to delete  
the name and number by pressing the Yes soft key. To  
cancel, press the No soft key.  
9. To return to the Idle screen, press the  
key.  
Finding a Phonebook Entry  
You can store phone numbers and their corresponding  
names in your SIM card and phone’s memories. They are  
physically separate but are used as a single entity, called  
Phonebook.  
Section 6: Understanding Your Phonebook  
63  
   
Depending on your particular SIM card, the maximum  
number of phone numbers the SIM card can store may  
differ.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Phonebook icon.  
Press the Select soft key or the  
key to enter the  
menu.  
3. Highlight Contact list and press the Select soft key or  
the key.  
Note: Steps 1-3 can be bypassed by pressing the Down navigation key  
while in Idle mode.  
4. Enter the first few letters of the name in the text box.  
The Phonebook entries are listed, starting with the first  
entry matching your input.  
5. If needed, press the Up or Down Navigation key until the  
entry you want is highlighted.  
6. Once you have found the entry, press the  
key to dial  
the number, or press the Options soft key to access the  
following Phonebook entry options:  
View: shows details of the Phonebook entry.  
Edit: allows you to edit the contents of your contact.  
Send message: allows you to send a message to the  
selected number. You may choose between sending a Text  
message, a Picture message, or a Voice note.  
New contact: takes you to the New Contact menu.  
Call: places a call to the number.  
64  
Finding a Phonebook Entry  
Copy to (phone or SIM card): allows you to copy the  
contact to your Phone or SIM card.  
Copy all to (phone or SIM card): allows you to copy all  
numbers stored on your SIM card to your phone, or on your  
phone to your SIM card.  
Send name card via: allows you to send your name card  
via Text message, Picture message, or Bluetooth.  
Assign speed dial: allows you to assign a speed dial key  
number to the selected Phonebook entry.  
Delete: allows you to delete the selected name and number  
from your Phonebook or delete all numbers. You are asked to  
confirm that you wish to delete the name and number by  
pressing the Yes soft key. To cancel, press the No soft key.  
Select language: allows you to select between English,  
Français, or Español.  
7. If you select the View option, press the Options soft key  
after the contact information is displayed, for these  
additional options:  
Edit: allows you to edit the name and number fields in the  
entry. You can also add email address and notes.  
Send message: allows you to send a message to the  
selected number. You may choose between Text messages,  
Picture messages, or Voice notes.  
Call: places a call to the number.  
Copy to (phone or SIM card): allows you to copy the  
number to your Phone or SIM card.  
Send name card via: allows you to send your name card  
via Text message, Picture message, or Bluetooth.  
Assign speed dial: allows you to assign a speed dial key  
number to the selected Phonebook entry.  
Section 6: Understanding Your Phonebook  
65  
Delete: allows you to delete the name and number from  
Phonebook. You are asked to confirm that you wish to delete  
the name and number by pressing the Yes soft key. To cancel,  
press the No soft key.  
After viewing one Phonebook entry, you can scroll  
through all Phonebook entries by pressing the Right or  
Left Navigation keys.  
Speed Dialing  
Once you have stored phone numbers from your  
Phonebook list, you can set up to 8 speed dial entries and  
then dial them easily whenever you want, simply by  
pressing and holding the associated numeric key.  
In Idle mode, to speed dial the numbers assigned to keys  
(2 to 9), press and hold the appropriate key.  
Setting Up Speed Dial Entries  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Phonebook icon.  
Press the Select soft key or the  
key to enter the  
menu.  
3. Scroll to Speed dial by pressing the Up or Down  
Navigation key and press the Select soft key or the  
key.  
4. Use the Up or Down Navigation key to select the number  
key to which you wish to assign the speed-dialing  
number. Select from the 2 to 9 keys, and press the Add  
soft key or the  
key.  
66  
   
Editing a Caller Group  
5. Your Contact list will be displayed. Highlight the number  
you wish to assign the speed dial to and press the Select  
soft key or the  
key.  
6. The number will be assigned to your speed dial.  
Note: Memory location 1 is reserved for your Voice mail server number and  
cannot be changed.  
Editing a Caller Group  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Phonebook icon.  
Press the Select soft key or the  
key to enter the  
menu.  
3. Highlight the Group option and press the Select soft key  
or the key.  
4. Scroll through the group list by pressing the Up or Down  
Navigation key.  
5. Highlight the group you want and press the Options soft  
key.  
6. Highlight the Edit option and press the Select soft key  
or the  
key.  
7. To edit the Caller group name, modify the text in the  
Name text box.  
8. To change the image associated with the Caller group,  
press the Down key to highlight the Picture ID icon.  
Press the  
key.  
The following options are available:  
Section 6: Understanding Your Phonebook  
67  
   
Take picture: allows you to take a picture with your camera.  
My photos: allows you to choose a photo from My photos  
folder.  
My downloads: allows you to choose a photo from your  
downloaded images folder.  
Icons: allows you to choose from pre-defined icons  
9. To change the ringtone associated with the Caller group,  
press the Down key to highlight the Ringtone icon. Press  
the  
key.  
The following options are available:  
Default sounds: allows you to choose between 16 different  
melodies.  
My sounds: allows you to assign a Ringtone from your My  
sounds folder.  
Voice list: allows you to assign a Voice note to this  
phonebook entry.  
Music: allows you to assign a Ringtone from your Music list.  
10. When you are finished, press the Save soft key. Your  
Caller group settings will be saved.  
11. Press the  
key to return to Idle mode.  
Copying all SIM Phonebook Entries  
You can copy all SIM entries to the Phone using this  
option. When you copy entries to the phone, duplicate  
entries are created in your Phonebook.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
68  
 
Deleting all of the Phonebook Entries  
2. Using the Navigation keys, scroll to the Phonebook icon.  
Press the Select soft key or the  
key to enter the  
menu.  
3. Highlight Management and press the Select soft key or  
the key.  
4. Highlight Copy all to and press the Select soft key or the  
key.  
5. Highlight SIM card and press the Select soft key.  
6. After receiving the Copy all to SIM? confirmation  
message, press the Yes soft key.  
Note: Options are available for entries stored to your phone that are not  
available when stored to the SIM card. For details see “Storing a Number in  
Deleting all of the Phonebook Entries  
You can delete all your entries from your phone’s  
memory, your SIM card, or both.  
Important! Once Phonebook entries have been deleted, they cannot be  
recovered.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Phonebook icon.  
Press the Select soft key or the  
key to enter the  
menu.  
3. Highlight Management and press the Select soft key or  
the  
key.  
Section 6: Understanding Your Phonebook  
69  
 
4. Scroll to Delete all by pressing the Up or Down  
Navigation key and press the Select soft key or the  
key.  
5. Press the  
key to place a check mark by the memory  
location you want to empty; All, Phone, SIM card, or SIM  
card (FDN).  
You can remove the check mark by pressing the  
again.  
key  
6. Press the Delete soft key. Enter your password and press  
the OK soft key or the key.  
Note: The password is preset to “00000000” at the factory. To change this  
7. When the Delete all? confirmation message appears,  
press the Yes soft key or the  
key.  
8. To cancel the deletion, press the No soft key.  
9. When you are finished, press the  
key to return to  
Idle mode.  
My Name Card  
My Name Card allows you to create a virtual business  
card.Oncecompleted,youcansendthecardtorecipients  
as a V-card attachment.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Phonebook icon.  
Press the Select soft key or the  
key to enter the  
menu.  
70  
   
Finding My Own Phone Number  
3. Highlight My name card and press the Select soft key or  
the  
key.  
4. My Name Card opens with the Name field highlighted.  
5. Enter information in each of the fields as desired. Use the  
Navigation keys to move between fields, then use the  
keypad to enter information.  
6. When finished, press the Options soft key and highlight  
the Save option. Press the Select soft key or the  
key.  
7. Your Name Card will be saved.  
Finding My Own Phone Number  
Thisfunctionisamemoryaid,whichyoucanusetocheck  
your own phone number if you need to do so.  
You can assign a name to each of your own phone  
numbers registered on your SIM card. You can also edit  
the names and numbers. Any changes made here do not  
in any way affect the actual subscriber numbers on your  
SIM card.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Phonebook  
icon. Press the Select soft key or the  
key to enter  
the menu.  
3. Select the Own number option by pressing the Up or  
Down Navigation key and press the Select soft key or  
the  
key.  
Section 6: Understanding Your Phonebook  
71  
     
4. Highlight the Number 1 option and press the Options  
soft key or the key.  
5. Highlight the Edit option and press the Select soft key or  
the key.  
6. Your phone number is displayed. You may edit the name  
and number if you wish. Press the Save soft key or the  
key.  
FDN list  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Phonebook icon.  
Press the Select soft key or the  
key to enter the  
menu.  
3. Select the FDN list option by pressing the Up or Down  
Navigation key and press the Select soft key or the  
key.  
4. Press the Add soft key and enter your 4-digit factory PIN  
and press the OK soft key.  
5. Enter the Contact Name, Number, Picture ID, Ringtone,  
and Group name.  
6. Press the Save soft key.  
Management  
The Management menu allows you to select where your  
contacts will be saved, copy your SIM contacts to your  
phone, sort your contacts, delete your contacts, or check  
your memory status.  
72  
       
Management  
Default saving  
The Default saving option allows you to choose where  
your contacts will be saved. The following options are  
available:  
Phone: new phonebook contacts will be saved to your phone.  
SIM card: new phonebook contacts will be saved to your SIM  
card.  
Ask on saving: you will be prompted to choose between Phone  
or SIM card whenever you save a new contact.  
Copy all to  
ThisoptionallowsyoutocopyallcontactsfromyourSIM  
card to your phone, or all your phone entries to your SIM  
card. For more information, see “Copying all SIM  
Sort by contacts  
This options allows you to have your contacts sorted by  
first name or last name.  
Note: Contacts stored to your SIM card do not have first and last names as  
separate fields. Therefore, they will be sorted on the first letter of the  
name entered in the Name field.  
Delete all  
This option allows you to delete your contacts. You may  
delete from Phone, SIM card, or SIM card (FDN). For  
Section 6: Understanding Your Phonebook  
73  
 
Important! Once contact entries have been deleted, they cannot be  
recovered.  
Memory status  
You can check how many names and numbers are stored  
in the Phonebook, in both SIM card and the phone  
memory. You can also see the capacity of both memories.  
Your phone memory can hold up to 1000 contacts.  
74  
Section 7: Messages  
Topics Covered  
• Types of Messages  
• Voice notes  
• Text messages  
• Picture messages  
• Inbox  
• Sentbox  
• Outbox  
• Drafts  
• Templates  
• Voice mail  
• Delete all  
• Settings  
• Broadcast messages (SIM Dependent)  
• Instant Messaging  
• Memory status  
This section describes how to send or receive different  
types of messages. It also includes the features and  
functionality associated with messaging.  
Section 7: Messages  
75  
     
Types of Messages  
Your phone provides the following message types:  
Voice notes  
Text messages  
Picture messages  
Voice mail messages  
Broadcast messages (SIM Dependent)  
Instant messaging  
Voice notes  
In this menu, you can record a Voice note of up to one  
minute long and then immediately send it by Picture  
message.  
When you access this menu, a timer appears on the  
screen.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Voice notes icon.  
Press the Select soft key or the  
key to enter the  
menu.  
Note: Steps 1and 2 can be bypassed by pressing the Right navigation key  
while in Idle mode.  
3. Press the Record soft key to start recording.  
4. Record a memo by speaking into the microphone.  
The display shows the elapsed time and the remaining  
time at one time.  
76  
       
Voice notes  
5. When you are finished, press the Stop soft key. Or, when  
the recording time is expired, the display switches to the  
next screen.  
6. The Voice note is saved to your Voice list.  
7. Press the Options soft key for the following options:  
Send to: allows you to send the Voice note.  
Play: plays back your Voice note.  
Re-record: discards the Voice note and enables you to  
record another one.  
Set default destination: allows you to remove or edit the  
default destination.  
Save: saves the Voice note.  
8. To send the Voice note, press the Send soft key or select  
the Send to option in the Options menu and press the  
Select soft key or the  
key.  
9. Highlight one the following options:  
Recent recipients: allows you to select a phone number or  
an email address from the last 30 destinations to which you  
sent messages.  
Phonebook: allows you to select the phone number or email  
address you want from your Phonebook. Use the  
key to  
check the selected entries.  
New recipient: allows you to enter a new entry.  
My Album: allows you to send the Voice note to My Album.  
My Journal: allows you to send the Voice note to My  
Journal.  
10. Press the Select soft key or the  
key.  
11. Select where you would like to send your Voice note and  
it will be entered in the Send menu in a To field.  
Section 7: Messages  
77  
12. To add another destination, select an empty To field and  
press the Options soft key.  
Note: When entering multiple destinations, you can also choose Add  
recipient, Change recipient type, and Cancel options in addition to the  
other send options.  
13. Repeat from step 9. You can enter up to 10 destinations.  
14. When you have finished entering the destinations, press  
the Send soft key or the  
key.  
Your phone sends the message and saves the message  
in the Sentbox.  
Text messages  
Short Message Service (SMS) allows you to send and  
receive short text messages to and from other mobile  
phones. In addition, your phone supports the  
Enhanced Messaging Service (EMS), which enables you  
to include simple pictures, melodies, and animated  
images in your messages. To use this feature, you must  
subscribe to your service provider’s message service.  
When the Message icon ( ) appears, you have  
received new text messages. When the memory is full,  
the message icon will flash on your phone and you  
cannot receive any new messages. You must delete a  
message before you can receive additional messages.  
Use the Delete option in each message box to delete  
obsolete messages.  
Create new  
In this menu, you can write and send a text message.  
78  
   
Text messages  
Creating a Text message  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Press the Select soft key or the  
key to enter the  
Messages menu.  
3. Highlight the Create new option and press the Select  
soft key or the key.  
4. Highlight the Text message option and press the Select  
soft key or the key.  
Note: Steps 1–4 can be bypassed by pressing the Left navigation key  
while in Idle mode.  
5. Create your message.  
Notes: For further details about entering characters, see "Section 5:  
6. When you finish typing your message, press the Options  
soft key.  
The following options are available:  
Insert from: allows you to insert Text templates, Phonebook,  
or Bookmarks. The Text templates option allows you to  
apply one of the preset message templates to the text. Select  
one of the 10 items stored in the Text messages template  
menu. PhoneBook allows you to add phone numbers or  
email addresses to your message. Bookmarks allows you  
to add Internet (web) addresses to your message.  
Add content: allows you to add a Picture, Animation, or  
Melody to your message.  
Section 7: Messages  
79  
 
Attach: allows you to attach a Name card, Schedule,  
Anniversary, Miscellaneous, or Task to your message.  
Save to Drafts: saves the message to your Drafts folder.  
Select language: allows you to set the language to English,  
Français, or Español.  
Text style: allows you to format the size and style of the text.  
For the Text size, Large, Medium, and Small size are available.  
Text mode options are Normal, Underline, and Strikethrough.  
The options for Bold and Italic are set by using the  
place a check mark by them.  
key to  
Back: returns you to the message selection screen to assign  
a message type.  
Note: Steps 6–7 can be bypassed by pressing the  
finish entering your message.  
key when you  
7. Press the  
Send key and highlight one of the  
following options:  
Recent recipients: allows you to select from recipients of  
your previous messages.  
Phonebook: allows you to select the phone number(s) you  
want from your phonebook.  
Phone number: allows you to enter a number to send your  
message to.  
8. If you choose Recent recipients or Phonebook, use the  
key to place check marks next to the entry or  
entries you want your message sent to and press the  
Send soft key.  
9. If you choose Phone number, enter the number in the To  
text box.  
80  
Picture messages  
10. To add another destination, select an Add recipients  
option and press the Add soft key.  
Note: When entering multiple destinations, you can also choose Group and  
Save to Drafts options in addition to the other send options.  
11. Repeat from step 8. You can enter up to 20 destinations.  
12. When you have finished entering the destinations, press  
the  
key.  
Your phone sends the Text message. After sending, the  
message is saved in the Sentbox.  
Picture messages  
This menu allows you to use the Multimedia Message  
Service.  
Picture Messaging is a messaging service that provides  
delivery of personal multimedia messages from phone  
to phone or from phone to email.  
In addition to the familiar text content of text messages,  
multimedia messages can contain images, graphics,  
voice, and audio clips. A Picture Messaging message is  
a multimedia presentation in a single file. It is not a text  
file with attachments.  
Using the Picture Messaging feature, your phone can  
receive and send messages that contain multimedia  
files, such as photos, videos, sounds and images you  
downloaded from the Internet and Voice notes you  
recorded. This function is available only if it is  
supported by your service provider. Only phones that  
Section 7: Messages  
81  
   
offer multimedia messaging features can receive and  
display multimedia messages.  
Create new  
This menu allows you to create a new multimedia  
message and send to one or multiple destinations.  
Creating and Sending a Multimedia Message  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Press the Select soft key or the  
key to enter the  
Messages menu.  
3. Highlight the Create new option and press the Select  
soft key or the key.  
4. Highlight the Picture message option and press the  
Select soft key or the key.  
5. Highlight Subject and press the  
key.  
6. Type the subject of your message and press the  
key.  
Note: For more information about entering characters, see "Section 5:  
7. To add a picture or video clip, highlight the Image &  
Video option and press the  
8. Highlight Add Image or Add video and press the Select  
soft key or the key.  
key.  
9. Select an image or video from the various options  
available.  
82  
Picture messages  
10. Press the Options soft key. Highlight the Add option and  
press the Select soft key or the  
key to add it to your  
message.  
11. To add a sound, highlight the Sound option and press the  
key.  
Note: if you attached a video clip to your message, you will not be able to  
add Sound to the message.  
12. Highlight the Add Sound option and press the Select  
soft key or the  
13. Select a Sound or Voice note from the various options  
and press key. Press the Add soft key to add the  
key.  
sound to your message.  
14. To add a message, highlight Text and press the  
key.  
15. Enter your message and press the  
key.  
16. When you have finished creating the message, press the  
Send soft key.  
17. Highlight one of the following options:  
Recent recipients: allows you to select from recipients of  
your previous messages.  
Phonebook: allows you to enter the phone number you want  
from your phonebook.  
New recipient: allows you to enter a new phone number  
and/or an Email address.  
My Album: allows you to send the message to the My  
Album folder.  
My Journal: allows you to send the message to My Journal.  
Section 7: Messages  
83  
18. After selecting where to send your message, press the  
key. Your phone sends the message.  
Inbox  
The Inbox stores messages that you have received. You  
can tell what kind of message it is by the icon  
displayed. If the icon envelope is open then the  
message has been read, otherwise it will appear closed.  
The following types of messages may appear in your  
inbox:  
Voice notes  
Text messages  
Multimedia messages  
Push messages  
When you enter the Inbox, the list of messages displays  
with the sender’s phone numbers, or names, if  
available in your Phonebook. After you have read the  
message, the envelope in the icon will appear opened.  
Note: By pressing the Left or Right Navigation keys, you may scroll  
between Inbox, Sentbox, Outbox, and Drafts.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Press the Select soft key or the  
key to enter the  
Messages menu.  
3. Highlight the Inbox option and press the Select soft key  
or the key.  
84  
 
Inbox  
Viewing a Text Message in Inbox  
1. Select a text message from the list and press the  
Options soft key.  
The following options will appear:  
View: read the text message.  
Reply via: allows you to send a reply to the sender by  
sending a Text message, Picture message, or Voice note.  
Call back: places a call to the selected number.  
Forward: allows you to forward a reply message to the  
sender.  
Delete: deletes the selected text message or all messages.  
Move to phone or SIM card: allows you to move the  
from the phone to SIM, or from the SIM to phone.  
Sort by: allows you to sort messages by Read/Unread, Date,  
Name, Type, Size, or Subject.  
Lock: allows you to lock the message to protect it from being  
deleted.  
2. Highlight the View option and press the Select soft key  
or the  
key to read the message contents.  
3. To scroll through the contents, press the Up or Down  
Navigation key.  
While reading a text message, you may choose the  
following options by pressing the Options soft key:  
Reply via: allows you to send a reply to the sender by sending  
a Text message, Picture message, or Voice note.  
Call back: places a call to the selected number.  
Forward: allows you to forward the message to another  
number.  
Section 7: Messages  
85  
Save address: allows you to extract the sender’s number and  
URL, email addresses or phone numbers from the message  
text, so that you can save them in your phone’s memory.  
Save media: allows you to save the media in a message.  
Delete: allows you to delete the message.  
Move to SIM card: allows you to move the message from the  
phone’s memory to the SIM card. This option is only available  
for messages stored in the phone’s memory.  
Move to phone: allows you to move the message from the SIM  
card to the phone’s memory. This option is only available for  
messages stored in the SIM card.  
Lock: allows you to lock the message to protect it from being  
deleted.  
Viewing a Picture Message in Inbox  
1. Highlight a picture message from the list and press the  
Options soft key.  
The following options will appear:  
View: read the picture message.  
Reply via: allows you to send a reply to the sender by  
sending a picture message or Voice note.  
Reply all via: allows you to send a reply to All by sending a  
picture message or Voice note.  
Call back: places a call to the selected number.  
Forward: allows you to forward the picture message to  
another recipient.  
Delete: deletes the selected picture message or all  
messages.  
Sort by: allows you to sort messages by Read/Unread, Date,  
Name, Type, Size, or Subject.  
86  
Inbox  
Lock: allows you to lock the message to protect it from being  
deleted.  
Properties: shows you information about the message, such  
as time and Date the message was received, the sender’s  
email address or phone number, recipient’s email address or  
phone number, Cc, Message size, Priority, and Msg class.  
2. Highlight the View option and press the Select soft key  
or the  
key to read the message contents.  
3. To scroll through the contents, press the Up or Down  
Navigation key.  
While viewing a picture message, you may choose the  
following options by pressing the Options soft key:  
Reply via: allows you to send a reply to the sender by sending a  
picture or text message or a Voice note.  
Reply all via: allows you to send a reply to All by sending a  
picture message or Voice note.  
Call back: places a call to the selected number.  
Forward: allows you to forward the message to another  
number.  
Replay: allows you to view the message again.  
Save address: allows you to extract the sender’s number and  
URL, email addresses or phone numbers from the message  
text, so that you can save them in your phone’s memory.  
Save media: allows you to save the picture or video to your My  
downloads folder.  
Delete: allows you to delete the message.  
Lock: allows you to lock the message to protect it from being  
deleted.  
Section 7: Messages  
87  
Properties: shows you information about the message, such as  
Subject, who the message was From, Message size,  
Transaction ID, Msg class, MMS version, who the message was  
To, Priority, and Date and time message was received.  
Viewing a Voice Note in Inbox  
1. Highlight a Voice note from the list and press the Options  
soft key.  
The following options will appear:  
Play: listen to the Voice note and view message details.  
Reply via: allows you to send a reply to the sender by  
sending a Voice note, text message, or picture message.  
Reply all via: allows you to send a reply to All by sending a  
Voice note or picture message.  
Call back: places a call to the selected number.  
Forward: allows you to forward the Voice note to another  
recipient.  
Delete: allows you to delete the selected Voice note or  
multiple messages.  
Sort by: allows you to sort messages by Read/Unread, Date,  
Name, Type, Size, or Subject.  
Lock: allows you to lock the Voice note to protect it from being  
deleted.  
Properties: shows you information about the Voice note,  
such as time and Date the Voice note was received, the  
sender’s email address or phone number, recipient’s email  
address or phone number, Cc, Voice note size, Priority, and  
Msg class.  
2. Highlight the Play option and press the Select soft key or  
the  
key to listen to the message contents.  
88  
Inbox  
While listening to the message, you may choose the  
following options by pressing the Options soft key:  
Reply via: allows you to send a reply to the sender by sending a  
Voice note, text message, or picture message.  
Reply all via: allows you to send a reply to All by sending a  
Voice note or picture message.  
Call back: places a call to the selected number.  
Forward: allows you to forward the message to another  
number.  
Replay: allows you to listen to the Voice note again.  
Save address: allows you to extract the sender’s number and  
URL, email addresses or phone numbers from the message  
text, so that you can save them in your phone’s memory.  
Save media: allows you to save the message to different areas  
or to your vCard or vCalendar.  
Delete: allows you to delete the Voice note.  
Lock: allows you to lock the message to protect it from being  
deleted.  
Properties: shows you information about the message, such as  
time and Date the message was received, the sender’s email  
address or phone number, recipient’s email address or phone  
number, Cc, Message size, Priority, and Msg class.  
Viewing a Push Message in Inbox  
A Push message is a way of delivering content (e.g.  
images, ringtones, etc.) to mobile phones that are WAP  
enabled. With a Push message you don't actually send  
the content in the text message, you direct the mobile  
phone where to get it from.  
1. Select a Push message from the list and press the  
Options soft key.  
Section 7: Messages  
89  
 
The following options will appear:  
View: listen to the Voice note and view message details.  
Delete: allows you to delete the selected message or all  
messages.  
Sort by: allows you to sort messages by Read/Unread, Date,  
Name, Type, Size, or Subject.  
Protection: allows you to lock the message to protect it from  
being deleted.  
2. Highlight the View option and press the Select soft key  
or the  
key to view the message contents.  
While reading the message, you may choose the  
following options by pressing the Options soft key:  
Go to URL: allows you to go to the website on your WAP  
browser.  
Save address: allows you to extract the sender’s number and  
URL, email addresses or phone numbers from the message  
text, so that you can save them in your phone’s memory.  
Delete: allows you to delete the message.  
Protection: allows you to lock the message to protect it from  
being deleted.  
Viewing a Message When You Receive It  
When a new multimedia message comes in, the display  
shows the Picture Messaging Message icon.  
1. Press the View soft key to view the message.  
Press the Exit soft key if you want to view the message  
later in the Inbox.  
2. Press the Options soft key or the  
key to access the  
various options described above.  
90  
Sentbox  
3. When you are finished, press the  
key.  
Sentbox  
This message box stores messages that you have sent.  
When you enter this menu, the list of messages in the  
box displays with the recipients’ phone numbers or  
names, if available in your Phonebook.  
Note: By pressing the Left or Right Navigation keys, you may scroll  
between Inbox, Sentbox, Outbox, and Drafts.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Press the Select soft key or the  
key to enter the  
Messages menu.  
3. Highlight the Sentbox option and press the Select soft  
key or the key.  
4. Select a message from the list and press the Options  
soft key.  
5. Highlight the View option and press the Select soft key  
or the  
key to view the message contents.  
6. To scroll through the contents, press the Up or Down  
Navigation key.  
While viewing a message, you can choose different  
options by pressing the Options soft key.  
Section 7: Messages  
91  
   
Outbox  
This message box stores messages that you have  
attempted to send but have not actually been sent yet.  
When you enter this menu, the list of messages in the  
box displays with the recipients’ phone numbers or  
names, if available in your Phonebook.  
Note: By pressing the Left or Right Navigation keys, you may scroll  
between Inbox, Sentbox, Outbox, and Drafts.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Press the Select soft key or the  
key to enter the  
Messages menu.  
3. Highlight the Outbox option and press the Select soft  
key or the key.  
4. Select a message from the list and press the Options  
soft key.  
5. Highlight the View option and press the Select soft key  
or the  
key to view the message contents.  
6. To scroll through the contents, press the Up or Down  
Navigation key.  
While reading a message, you can choose different  
options by pressing the Options soft key.  
92  
 
Drafts  
Drafts  
This message box stores messages that you may want to  
edit or send at a later time.  
When you enter this menu, the list of messages in the  
box displays.  
Note: By pressing the Left or Right Navigation keys, you may scroll  
between Inbox, Sentbox, Outbox, and Drafts.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Press the Select soft key or the  
key to enter the  
Messages menu.  
3. Highlight the Drafts option and press the Select soft key  
or the key.  
4. Select a message from the list and press the Options  
soft key.  
5. Highlight the Edit option and press the Select soft key or  
the  
key to edit the message contents.  
For a Text Message, press the  
Send key.  
For a Picture Message, press the Send soft key.  
While viewing a draft message, you can choose  
different options, depending on the type of message,  
by pressing the Options soft key.  
Templates  
Besides entering message text using the keypad keys,  
you can speed message composition by including  
copies of stored text (Templates) in your message.  
Section 7: Messages  
93  
     
Text Templates  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Press the Select soft key or the  
key to enter the  
Messages menu.  
3. Highlight the Templates option and press the Select soft  
key or the key.  
4. Highlight Text templates and press the Select soft key  
or the key.  
5. Highlight the sentence you wish to have inserted and  
press the key. The sentence will be placed in a text  
message display.  
You can choose from ten predefined sentences that you  
can add to your text message to save time.  
6. Continue to write your text message. For more  
Picture Templates  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Press the Select soft key or the  
key to enter the  
Messages menu.  
3. Highlight the Templates option and press the Select soft  
key or the key.  
4. Highlight Picture message templates and press the  
Select soft key or the key.  
5. Highlight the picture message template and press the  
key to view the image.  
94  
Voice mail  
6. To send the highlight image in a message press the  
Options soft key, highlight Send message and press  
or press the Send key.  
7. Select a recipient or send to My Album or My Journal.  
8. For more information, see "Picture message" on page  
Voice mail  
This menu provides you with a way of accessing your  
voice mailbox, if provided by your network.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Press the Select soft key or the  
key to enter the  
Messages menu.  
3. Highlight the Voice mail option and press the Select soft  
key or the key.  
The following options are available:  
Call voice mail: displays the pre-loaded Voice mail number  
received from your service provider. Press the OK soft key or  
the  
key to listen to your messages. You can also connect  
to the voice server by pressing and holding the  
mode.  
key in Idle  
Voice server number: allows you to change the Voice mail  
server number, if necessary.  
Note: Voice mail is a network feature. Please contact your service provider  
for further details.  
Section 7: Messages  
95  
   
Delete all  
This menu allows you to delete all of the messages in  
each message box. Or, you can also delete all of your  
messages in all message boxes at one time.  
1. To select a message box to clear, press the Up or Down  
Navigation key. To delete all of your messages, select the  
Delete all option.  
2. To place or remove a check mark, press the  
key.  
3. Press the Delete soft key to delete the marked objects.  
4. After you receive a confirmation message, press the Yes  
soft key to delete the selected message box contents.  
Otherwise, press the No soft key.  
Settings  
In this menu, you can set up default text message and  
picture message information. The last setting you  
accessed is automatically activated for sending  
subsequent messages.  
Text message  
Service center: allows you to store or change the number of  
your message center, which is required when sending  
messages. You must obtain this number from your service  
provider.  
Destination address: allows you to enter a number that you  
would like to send all messages to. You can still message  
others, but this number will always appear in the Send list.  
Validity period: allows you to set the length of time your text  
messages are stored at the message center while attempts are  
made to deliver them.  
96  
     
Broadcast Messages (SIM Dependent)  
Reply path: allows the recipient of your message to send you a  
reply message using your message center, if your network  
supports this service.  
Delivery report: when this option is check marked, the network  
informs you whether or not your message has been delivered.  
Picture message  
The following options are used to set Send and Receive  
settings for Picture messages.  
Send settings  
Delivery report: when this option is enabled, the network  
informs you whether or not your message has been delivered.  
Read reply: when this option is enabled, your phone sends a  
request for a reply along with your message to the recipient.  
Priority: you can select the priority level of your messages.  
Expiry date: The expiration date is how long the message  
receiver has to retrieve the message.  
Delivery time: you can set a delay time before the phone sends  
your messages.  
Retrieve settings  
Anonymous reject: you can set your phone to automatically  
reject anonymous messages.  
Ads allowed: allows you to receive advertisements.  
Report allowed: you can set the option to receive a delivery  
report.  
Broadcast Messages (SIM Dependent)  
This network service allows you to receive text  
messages on various topics, such as the weather or  
traffic.  
Section 7: Messages  
97  
     
Please contact your service provider for further details.  
Memory status  
You can check the amount of the memory being used  
and the memory remaining for text, picture, broadcast,  
and push messages.  
The display shows the total space including the used  
and free space. You can also view how much space is  
currently occupied by each message box.  
Instant Messaging  
Instant Messaging (IM) is a way of sending short,  
simple messages that are delivered immediately to  
users online at that moment.  
Before using this feature, you need to subscribe to a  
messenger service. For further details, contact your  
service provider.  
Starting your Instant Messaging  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Instant  
messaging icon. Press the Select soft key or the  
key to enter the menu.  
3. Highlight the messenger service to which you subscribed  
using the Up or Down Navigation key and press the  
Select soft key or the  
key.  
4. Highlight the Sign on, Connect, or Sign in option,  
depending on your messenger service and press the  
Select soft key or the  
key.  
98  
     
Instant Messaging  
5. Enter the required sign on information such as ID and  
password and press the OK soft key.  
Note: The information required for sign on will vary depending on the  
instant messaging provider you are using.  
6. Follow the on-screen instructions to read, reply to,  
compose, send, and manage your IM account.  
Using the Instant Messenger Menu  
The user can look at next menu after select "IM  
application"  
On the sign-on screen of the messenger, press the  
Options soft key to access the following options:  
Sign on/Connect/Sign in: allows you to login to your IM  
account.  
Saved conversations: The preserved content of the  
conversation is seen.  
Offline conversations: Content of the conversation are seen up  
to ten when the conversation do not bring to a close of the  
online and it logs out without being ended.  
Settings: allows you to change your Default community and  
Community settings.  
Help: provides various help information depending on the  
community you have selected.  
Section 7: Messages  
99  
100  
Section 8: Changing Your Settings  
Topics Covered  
• Time & Date  
• Phone settings  
• Display settings  
• Sound settings  
• Bluetooth  
• Network services  
• Security  
• Software update  
• Reset settings  
This section explains the sound and phone settings for  
yourphone.Itincludesdisplaysettings,securitysettings,  
and extra settings associated with your phone.  
Section 8: Changing Your Settings  
101  
   
Time & Date  
This menu allows you to change the current time and  
date displayed.  
The following options are available:  
Set time: allows you to change the hour and minute.  
AM/PM: allows you to set either AM or PM.  
Time format: allows you to select whether your time is  
displayed in 12 hours or 24 hours format.  
Set date: allows you to enter the month, day, and year.  
Date format: allows you to select MM/DD/YYYY, DD/MM/YYYY,  
or YYYY/MM/DD format.  
Week start day: allows you to specify which day (Sunday or  
Monday) to consider as the first day of the week.  
Auto update: allows you to receive time information from your  
service provider’s network.  
On: the phone automatically updates the time and date  
according to the current time zone using the network  
service.  
Confirm first: the phone asks for a confirmation before the  
update.  
Off: you need to manually set the time and date according to  
the current time zone using the Set time menu.  
To change your time and date settings:  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Settings icon.  
Press the Select soft key or the  
key to enter the  
menu.  
102  
     
Phone settings  
3. Highlight the Time & Date options and press the Select  
soft key or the  
key.  
4. Use the Up or Down Navigation key to select the option  
you wish to change.  
5. To set Set time or Set date, use the Left or Right  
navigation key to position the cursor over the number  
you wish to change.  
6. Enter the desired number.  
7. To change other options, use the Left or Right navigation  
key to select the desired setting.  
8. When you are finished changing your settings, press the  
Save soft key to save your settings. Otherwise press the  
Back soft key.  
Note: Automatic updates of time and date do not change the time you have  
set for alarm settings or calendar memos.  
Phone settings  
You can customize various phone settings.  
Language  
This menu allows you to select a display language for  
Text language and Input mode. Choose from English,  
Français, or Español or choose Automatic selection.  
Greeting message  
This menu allows you to set a greeting to be displayed  
briefly when the phone is switched on.  
Section 8: Changing Your Settings  
103  
       
For details about entering characters, see "Section 5:  
Slide settings  
This menu allows you to change the settings for the  
slider on the phone.  
To change your time and date settings:  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Settings icon.  
Press the Select soft key or the  
key to enter the  
menu.  
3. Select Phone settings and press the Select soft key.  
4. Highlight Slide settings and press the Select soft key or  
the  
key.  
5. In the Up option, choose Accept call to connect a call  
when sliding the phone up, or None to slide open the  
phone without connecting the incoming call. Use the  
Right or Left Navigation keys to select options.  
6. In the Down option, choose Stop operation to end the  
call when the slider is closed, or Continue operation to  
continue the call when the slider is closed. Use the Right  
or Left Navigation keys to select options.  
7. Press the Save soft key to save settings, or the Cancel  
soft key to return to the previous menu.  
8. Press the  
key to return to the main menu.  
104  
Phone settings  
Extra settings  
You can turn the automatic redialing or answering  
features on or off.  
1. To turn a feature on, highlight the feature and press the  
key. A check mark displays in front of the option.  
2. To turn a feature off, highlight the checked feature and  
press the  
key. The check mark no longer displays.  
The following options are available:  
Auto redial: when this option is checked, the phone makes  
up to ten attempts to redial a phone number after an  
unsuccessful call.  
Note: The interval between call attempts varies.  
Anykey answer: when this option is checked, you can  
answer an incoming call by pressing any key, except the  
key or the Reject soft key. To reject the call, press the  
or the Reject soft key. When this option is unchecked, you  
must press the key or Accept soft key to answer a call.  
key  
3. When you have finished changing your settings, press  
the Save soft key to save your settings. Otherwise press  
the Back soft key.  
Airplane mode  
Use Airplane mode when on an airplane or in an area  
where making or receiving calls or data transmission  
are prohibited. When activated you cannot send or  
receive calls or access online information. However,  
you can access the following features, such as:  
Games  
Section 8: Changing Your Settings  
105  
 
Music  
Notepad  
Voice Memos  
Display settings  
In this menu, you can change various settings for the  
display or backlight.  
Wallpaper  
This menu allows you to change the background image  
to be displayed in Idle mode.  
The following options are available:  
Get more wallpaper: this option takes you to t-zones where  
you can download wallpapers.  
Note: When downloading wallpapers, charges may apply.  
Default wallpapers: allows you to choose from a list of  
wallpapers included with your phone.  
My downloads: allows you to choose a photo from your  
downloaded images folder.  
My photos: allows you to choose a photo from My photos  
folder.  
To change the background image:  
1. After selecting one of the above options, scroll through  
the list by pressing the Navigation keys and select an  
image.  
2. Highlight your wallpaper choice and press the  
key.  
3. Press the Select soft key.  
106  
   
Display settings  
4. The image will be saved as your wallpaper.  
Info display  
This menu allows you to set Text style and Text color.  
Press the Left or Right Navigation key to change the  
settings.  
Interior display  
Youcanselectthecolorofthemenusdisplayed. Thereare  
two different patterns to choose from.  
Brightness  
You can adjust the display brightness to see it better in  
different lighting conditions.  
Press the Left or Right Navigation key or press the  
Volume keys to adjust the brightness.  
Backlight  
In this menu, you can select the length of time that the  
keypad backlight is on and how much longer the  
display is illuminated before going off.  
The On setting is how long the keypad backlight is on.  
You can select 15 seconds, 30 seconds, 1 minute, 3  
minutes, or 10 minutes.  
The Dim option is how much longer after the keypad  
backlight goes off that the display remains lit. You can  
select Off, 15 seconds, 30 seconds, 1 minute, or 3  
minutes.  
For example, if you set On for 30 seconds and Dim for  
15 seconds, after 30 seconds the backlight on the keys  
Section 8: Changing Your Settings  
107  
 
would turn off and 15 seconds later the display light  
would turn off.  
Press the Left or Right Navigation key to adjust the  
settings.  
Dialing display  
This menu allows you to select the size, color and  
background color of your dialing font.  
To change the size of the font:  
1. Highlight the Font size option and press the Select soft  
key or the  
key.  
2. Use the Left or Right navigation key to select between  
Large, Medium, or Small.  
3. Press the Save soft key or the  
key to save your  
key.  
change. Otherwise, press the  
To change the color of the font:  
1. Highlight the Font color option and press the Select soft  
key or the key.  
2. Use the Left or Right navigation key to select either  
Basic (black), Rainbow, or Monochrome.  
3. Press the Save soft key or the  
key to save your  
key.  
change. Otherwise, press the  
To change the background color:  
1. Highlight the Background color option and press the  
Select soft key or the key.  
2. Use the Left or Right navigation key to select either  
Steelblue, Royalblue, Blueblack, Purple, Plum, Peru,  
Goldenrod, Yellowgreen, Lightgreen, or Teal.  
108  
 
Sound settings  
3. Press the Save or the  
Calendar  
key to save your settings.  
This menu allows you to set the current month’s  
calendar for the wallpaper.  
1. Use the Up or Down Navigation key to choose from On  
or Off.  
2. Press the Select soft key or the  
key to save your  
settings.  
Show caller information  
By turning this option on, when you miss a call, caller  
information such as name will be displayed on your  
display when your missed calls are listed.  
Sound settings  
You can customize various sound settings for your  
phone.  
Incoming call  
Get More MegaTones  
Using the Get More MegaTones option, you can access  
the website preset by T-Mobile and download new  
sounds.  
Get More HiFi Ringers  
Using the Get More HiFi Ringers option, you can  
access the website preset by T-Mobile and download  
new HiFi Ringers.  
Section 8: Changing Your Settings  
109  
       
Note: When downloading MegaTones® or HiFi Ringers TM, charges may  
apply.  
Ringtone  
This menu allows you to select a ring melody. Highlight  
Ringtone and press the  
key. Use the Up or Down  
key and select My sounds, Voice list, Music, or Default  
sounds. Then use the  
key to select a ringtone.  
Volume  
This menu allows you to adjust the ring volume to one  
of five levels.  
Use the Right or Left navigation key to increase or  
decrease the volume.  
Alert type  
This menu allows you to specify how you are to be  
informed of incoming calls. Use the Right or Left  
navigation key to select a ring tone.  
The following options are available:  
Melody: the phone rings using the ring melody selected in the  
Ringtone menu.  
Vibration: the phone vibrates but does not ring.  
Vibration then melody: the phone vibrates 3 times and then  
starts ringing.  
Keypad tone  
This menu allows you to select the key tone and  
volume that the phone sounds when you press a key.  
110  
     
Sound settings  
Use the Right or Left navigation key to make your  
selections.  
To turn off the sound, select Off.  
Message tone  
This menu allows you to set the message tone for  
incoming Text, Picture, and Broadcast messages. You  
can set the Tone, Alert type, and Repetition.  
Use the Right or Left navigation key to make your  
selections.  
Power on/off  
This menu allows you to select the melody that the  
phone sounds when it is switched on and off.  
To turn off the sound, select Off.  
Slide tone  
This menu allows you to select the melody that the  
phone sounds when you open or close your phone.  
To turn off the sound, select Off.  
Silent mode  
This menu allows you to select whether or not your  
phone will vibrate while in quiet mode. You may  
choose between Vibration and Mute.  
Extra tones  
You can customize additional tones for the phone.  
1. To turn a given tone on, press the  
key. A check mark  
displays in front of the option.  
Section 8: Changing Your Settings  
111  
   
2. To turn a given tone off, press the  
key. The check  
mark no longer displays in front of the option.  
The following options are available:  
Minute minder: sets whether or not the phone beeps every  
minute during an outgoing call to keep you informed of the  
length of your call.  
Connection tone: sets whether or not the phone beeps when  
your call is connected to the system.  
Alerts on call: sets whether or not you receive tones when a  
message arrives while you are on a call.  
Network services  
Call forwarding  
This network service enables incoming calls to be  
rerouted to the number that you specify.  
Example: You may wish to forward your business calls to a colleague while  
you are on holiday.  
To set your call forwarding options:  
1. Select a call forwarding option by pressing the Up or  
Down Navigation key and then press the Select soft key  
or the  
key.  
The following options are available:  
Forward always: all calls are forwarded.  
Busy: calls are forwarded when your phone is busy.  
No reply: calls are forwarded when your phone is not  
answered.  
112  
       
Network services  
Unreachable: calls are forwarded when you are not in an  
area covered by your service provider or when your phone is  
switched off.  
Cancel all: all call forwarding options are canceled.  
2. Select the type of calls, Voice calls or Data calls, by  
pressing the Up or Down Navigation key, and then press  
the Select soft key or the  
key.  
The current status displays. If the option has already  
been set, the number to which the calls are forwarded  
displays.  
3. To activate call forwarding, select Activate by using the  
Left or Right navigation key.  
4. To deactivate call forwarding, select Deactivate by using  
the Left or Right navigation key.  
5. Enter the number to which the calls are to be forwarded  
in the Forward to text box and press the Select soft key  
or the  
key.  
To enter an international code, press and hold the  
key until the + sign displays.  
The phone sends your settings to the network and the  
network’s acknowledgement displays.  
Call barring (SIM Dependent)  
Call Barring allows you to restrict specific types of  
incoming and outgoing calls for your phone. This is  
useful if you allow someone to use your phone for a  
short period of time.  
Section 8: Changing Your Settings  
113  
 
Call waiting  
This network service informs you when someone is  
trying to reach you during another call.  
You can specify individual call waiting options for  
voice calls and/or data calls.  
To set your call waiting options:  
1. Select the type of calls, Voice calls or Data calls, to  
which the call waiting option is to be applied by pressing  
the Up or Down Navigation key and then press the  
Select soft key or the  
key.  
The screen informs you whether call waiting is activated  
or deactivated.  
2. Highlight Activate or Deactivate and press the Select  
soft key or the  
key.  
3. Call waiting will then be activated or deactivated.  
4. Select the Cancel all option to deactivate Call waiting on  
all voice and data calls.  
Network selection  
The Network Selection feature enables you to  
automatically or manually select the network used  
when roaming outside of your home area.  
Note: You can select a network other than your home network only if there  
is a valid roaming agreement between the two.  
To change Network Selection mode:  
1. Highlight the Search now option and press the Select  
soft key or the  
key.  
114  
       
Network services  
2. Press the Up or Down Navigation key until the network  
you want highlights and then press the Select soft key  
or the  
key.  
The phone will scan for that network and you will be  
connected.  
To change you Default setup:  
1. Highlight the Default setup option and press the Select  
soft key or the key.  
2. Highlight either the Automatic or Manual option and  
press the Select soft key or the key.  
If you select Automatic, you are connected to the first  
available network when roaming.  
3. If you select Manual, press the Up or Down Navigation  
key until the network you want highlights and then press  
the Select soft key or the  
key.  
The phone will scan for that network and you will be  
connected.  
Caller ID  
You can prevent your phone number from being  
displayed on the phone of the person being called.  
Note: Some networks do not allow you to change this setting.  
The following options are available:  
Set by network: the default setting provided by the network is  
used.  
Hide number: your number does not display on the other  
person’s phone.  
Section 8: Changing Your Settings  
115  
   
Show number: your number is sent each time you make a call.  
Bluetooth  
About Bluetooth  
Bluetooth is a short-range wireless communications  
technology capable of exchanging information over a  
distance of about 30 feet without requiring a physical  
connection.  
Unlike infrared, you don't need to line up the devices to  
beam information with Bluetooth. If the devices are  
within a range of one another, you can exchange  
information between them, even if they are located in  
different rooms.  
The following Bluetooth options are available:  
Turn Bluetooth On/Off  
This option allows you to turn Bluetooth On or Off.  
Make a selection and press the Select soft key or the  
key.  
My devices  
This option allows you to search for new Bluetooth  
devices. Highlight the Search new device option and  
press the Select soft key or the  
key. The phone will  
search for available devices.  
My visibility  
This option allows you to turn your visibility to On or  
Off. Make a selection and press the Select soft key or  
the  
key.  
116  
             
Bluetooth  
My phone name  
This option shows the name given to your phone for  
Bluetooth purposes. You can edit the name if needed.  
Security modes  
This option allows you to set your security modes to  
On or Off. Make a selection and press the Select soft  
key or the  
key.  
Features  
Actually, the Bluetooth specification is a protocol that  
describes how the short-range wireless technology  
works, whereas individual profiles describe the  
services supported by individual devices. Profiles  
reduce the chance that different devices will not work  
together.  
The following Service profiles are available:  
Headset: The remote Bluetooth headset enables outgoing and  
incoming calls.  
Handsfree: The remote Bluetooth car kit enables outgoing and  
incoming calls.  
Serial port: The remote Bluetooth device acts as a virtual serial  
port.  
Dial up networking: The remote Bluetooth device enables  
Internet access through a phone modem.  
File transfer: The remote Bluetooth device enables users to  
transfer files from their handset to others.  
Object push: The remote Bluetooth device enables the transfer  
of personal data (e.g. vCard, vCalendar, etc.) to other devices.  
Section 8: Changing Your Settings  
117  
   
Help  
This menu option launches the t-zones menu to assist  
you with the Voicemail and “MyFaves” options.  
Security  
The Security feature enables you to restrict the use of  
your phone by others and to restrict the types of calls.  
Various codes and passwords are used to protect the  
features of your phone.  
PIN check  
When the PIN Check feature is enabled, you must enter  
your PIN each time you switch on the phone.  
Consequently, any person who does not have your PIN  
cannot use your phone without your approval.  
Note: Before enabling or disabling the PIN Check feature, you must enter  
your PIN. The default PIN is 1234.  
The following options are available:  
Disable: the phone connects directly to the network when you  
switch it on.  
Enable: you must enter the PIN each time the phone is  
switched on.  
Change PIN  
This feature allows you to change your current PIN,  
provided that the PIN check feature is enabled. You  
must enter the current PIN before you can specify a  
new one.  
118  
           
Security  
Once you have entered a new PIN, you are asked to  
confirm it by entering it again.  
Phone lock  
When the Phone lock feature is enabled, the phone is  
locked and you must enter the 4- to 8-digit phone  
password each time the phone is switched on.  
The password is preset to “00000000” at the factory. To  
change the phone password, see "Change password" on  
Once the correct password has been entered, you can  
use the phone until you switch it off.  
The following options are available:  
Disable: you are not asked to enter the phone password when  
you switch on the phone.  
Enable: you are required to enter the phone password when  
you switch on the phone.  
Change password  
The Change password feature allows you to change  
your current phone password to a new one. You must  
enter the current password before you can specify a  
new one.  
The password is preset to “00000000” at the factory.  
Once you have entered a new password, you are asked  
to confirm it by entering it again.  
Note: If you change your password, be sure to write it down and keep it in  
a safe place. If you forget your password, your phone will require service to  
have it unlocked.  
Section 8: Changing Your Settings  
119  
     
Lock application  
Using the Lock application option, you can lock  
everything on your phone with the exception of  
making a call. The password must be entered to access  
Menu mode or t-zones.  
1. Highlight the Lock application option and press the  
Select soft key or the  
key. The following  
applications are listed:  
Lock all  
Call records  
Phonebook  
Messages  
Images  
Videos  
Music  
Sounds  
Other files  
Memory card  
2. Use the Up or Down Navigation keys to highlight the  
category and press key to mark the category.  
3. Press the Save soft key to save your settings.  
4. Press the Back soft key to return to the previous menu.  
FDN mode  
FDN (Fixed Dial Number) mode, if supported by your  
SIM card, allows you to restrict your outgoing calls to a  
limited set of phone numbers.  
The following options are available:  
120  
 
Software update  
Disable: you can call any number.  
Enable: you can only call phone numbers stored in your SIM’s  
FDN. You must enter your PIN2. You can obtain your PIN2 from  
your service provider.  
Change PIN2  
The Change PIN2 feature allows you to change your  
current PIN2 to a new one. You must enter the current  
PIN2 before you can specify a new one. Once you have  
entered a new PIN2, you are asked to confirm it by  
entering it again.  
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu  
does not display.  
Software update  
This option lets you download Over-The-Air phone  
software Updates from T-Mobile that improve the  
performance of your phone. Only the internal software  
is updated. No phonebook entries or other information  
saved to your phone will be deleted.  
Important! Make sure your phone battery is fully charged or connect your  
phone to the Travel Adapter before selecting this option.  
To update your phone’s software:  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Settings icon.  
Press the Select soft key or the  
key to enter the  
Settings menu.  
Section 8: Changing Your Settings  
121  
     
3. Using the Navigation keys, highlight the Software  
update option and press the Select soft key or the  
key.  
4. Follow the on-screen instructions.  
Reset settings  
From this menu you can reset your phone and sound  
settings to the default settings.  
The following options are available:  
All: Phone, Display, and Sound settings will be returned to  
default values.  
Phone settings: only phone settings will be returned to  
default values.  
Display settings: only display settings will be returned to  
default values.  
Sound settings: only sound settings will be returned to  
default values.  
To reset your settings:  
1. Highlight one of the options and press the  
key to  
place a check mark next to the option.  
2. Press the Reset soft key.  
3. You will be prompted with Reset settings?. Press the  
Yes soft key.  
4. Enter the 4- to 8-digit password and press the OK soft  
key or the  
key. You will receive a Reset  
confirmation message.  
The password is preset to “00000000.” To change this  
122  
     
Section 9: Fun & Apps  
Topics Covered  
• My files  
• Games  
• Music player  
• Camera  
• Voice recognition  
• Organizer  
This section outlines the various applications that are  
available on your phone.  
Section 9: Fun & Apps  
123  
   
My files  
My files allows you to manage your sounds, images,  
music, and videos in one convenient location.  
Sounds  
In this menu, you can view the list of sounds  
downloaded from the web server or received in  
multimedia messages. You can set a downloaded sound  
as the current ring tone.  
Note: When downloading MegaTones® or HiFi Ringers TM, charges may  
apply.  
The following options are available:  
Get More MegaTones  
Using the Get More MegaTones option on the sounds  
list, you can access the website preset by T-Mobile and  
download new sounds.  
Get More HiFi Ringers  
Using the Get More HiFi Ringers option on the sounds  
list, you can access the website preset by T-Mobile and  
download new HiFi Ringers.  
My sounds  
Highlight an item in the My sounds menu and press the  
Options soft key. The following options are available:  
Download new: takes you to t-zones where you can download  
new sounds.  
Play: plays the sound.  
124  
       
My files  
Send via: allows you to send the sound via Picture message or  
Bluetooth.  
Set as: allows you to set the sound as your Ringtone, a Caller  
ringtone, or an Alarm tone.  
Delete: allows you to delete the selected sound or delete  
Multiple sounds.  
Move to memory card: allows you to move the sound to your  
micro SD memory card.  
Copy to memory card: allows you to copy the sound to your  
micro SD memory card.  
Rename: allows you to change the name of the sound.  
Bluetooth visibility: allows the selected sound or multiple  
sounds to be shared or released for the use of another  
Bluetooth device.  
Lock/Unlock: allows you to lock the sound to protect it from  
deletion.  
Properties: displays the sound Name, Date, Format, Size, and  
Protection.  
Voice list  
The Voice list contains your recorded audio messages.  
Highlight an item in the Voice list menu and press the  
Options soft key. The following options are available:  
Play: plays the audio message.  
Send via: allows you to send the audio message via Picture  
message or Bluetooth.  
Set as: allows you to set the voice memo as a Ringtone, Caller  
ringtone, or Alarm tone.  
Delete: allows you to delete the selected audio message or  
delete Multiple audio messages.  
Section 9: Fun & Apps  
125  
Move to memory card: allows you to move the audio message  
to your micro SD memory card.  
Copy to memory card: allows you to copy the audio message  
to your micro SD memory card.  
Rename: allows you to change the name of the audio message.  
Bluetooth visibility: allows the selected audio message or  
multiple messages to be shared or released for the use of  
another Bluetooth device.  
Lock/Unlock: allows you to lock the audio message to protect  
it from deletion.  
Properties: displays the audio message Name, Date, Format,  
Length, Size, and Protection.  
Memory card  
Select this option to see the sounds that you have saved  
to your memory card.  
Note: The Memory card option will only appear if a micro SD memory card  
has been inserted in your phone.  
Images  
In this menu, you can view the list of images  
downloaded from the web server or received in  
messages. You can set a downloaded image as the  
current background image.  
The following options are available:  
Get More Wallpapers  
Using the Get More Wallpapers option, you can access  
the website preset by T-Mobile and download new  
images.  
126  
My files  
My Album  
My Album is a private online picture album that you  
can use to store and share pictures, videos, voice  
messages, and text.  
Use the following procedure to access My Album:  
Note: When accessing My Album, charges may apply.  
1. In your t-zone browser, select the My Albums Menu  
link and press the Select soft key or the  
key.  
2. Photos sent to this folder are stored in the Inbox Album.  
Press the Select soft key to view the photos.  
3. Press the  
key to exit t-zones and return to the Idle  
screen.  
My Journal  
Make notes in My Journal, your online diary and  
weblog. Keep it private to store your personal  
memories, or send emails to invite people to view and  
comment on your album. See your service provider for  
more information.  
Note: When accessing My Journal, charges may apply.  
My downloads  
This menu allows you to access your downloaded  
images.  
Scroll to the image you want to view. By pressing the  
Options soft key you can access the following options:  
Section 9: Fun & Apps  
127  
   
Download new: takes you to t-zones where you can download  
new images.  
View: displays the image.  
Send via: allows you to send the image via Picture message or  
Bluetooth.  
Set as: allows you to set the image as Wallpaper or as a Caller  
ID.  
Delete: allows you to delete the Selected image or to delete  
Multiple image.  
Move to memory card: allows you to move the item to the  
micro SD memory card.  
Copy to memory card: allows you to copy the item to the micro  
SD memory card.  
Rename: allows you to change the name of the item.  
Display mode: allows you to see your images displayed in a  
Line view or in Thumbnail view.  
Slide show: allows you to see all of your photos in a slide show  
presentation.  
Bluetooth visibility: allows the selected image or multiple  
images to be shared or released for the use of another  
Bluetooth device.  
Lock/Unlock: allows you to lock/unlock the image to protect it  
from deletion.  
Properties: displays the image Name, Date, Format,  
Resolution, Size, and Protection.  
My photos  
In this menu you can review the photos you’ve taken.  
Highlight a photo and press the Options soft key to  
choose from the following options:  
128  
My files  
View: displays the photo.  
Send to My Album: sends the photo to My Album.  
Send via: allows you to send the image via Picture message or  
Bluetooth.  
Set as: allows you to set the photo as Wallpaper or as a Caller  
ID.  
Default destination: allows you to remove or replace the  
default destination.  
Delete: allows you to delete the Selected photo or to delete  
Multiple photos.  
Move to memory card: allows you to move the photo to the  
micro SD memory card.  
Copy to memory card: allows you to copy the photo to the  
micro SD memory card.  
Rename: allows you to change the name of the photo.  
Display mode: allows you to see your images displayed in a  
Line view or in Thumbnail view.  
Slide Show: allows you to see all of your photos in a slide show  
presentation. Choose 1 second or 3 seconds for slide show  
interval.  
Bluetooth visibility: allows the selected photo or multiple  
photos to be shared or released for the use of another  
Bluetooth device.  
Lock/Unlock: allows you to lock/unlock the image to protect it  
from deletion.  
Properties: displays the image Name, Date, Format,  
Resolution, Size, and Protection.  
Memory card  
Select this option to see the images that you have saved  
to your memory card.  
Section 9: Fun & Apps  
129  
Note: The Memory card option will only appear if a micro SD memory card  
has been inserted in your phone.  
Videos  
In this menu, you can view a list of videos downloaded  
from the web server or received in multimedia  
messages. The following options are available:  
Downloaded videos  
This menu allows you to access your downloaded  
video clips.  
Scroll to the video you want to view. By pressing the  
Options soft key you can access the following options:  
Play: plays the video.  
Send via: allows you to send the video via Picture message or  
Bluetooth.  
Delete: allows you to delete the Selected video clip or to delete  
Multiple video clips.  
Move to memory card: allows you to move the video to the  
micro SD memory card.  
Copy to memory card: allows you to copy the video to the  
micro SD memory card.  
Rename: allows you to change the name of the video.  
Display mode: allows you to see your videos displayed in a  
Line view or in Thumbnail view.  
Bluetooth visibility: allows the selected video or multiple  
videos to be shared or released for the use of another Bluetooth  
device.  
Lock/Unlock: allows you to lock/unlock the video to protect it  
from deletion.  
130  
 
My files  
Properties: displays the video Name, Date, Format, Size, and  
Protection.  
My videos  
In this menu you can review the photos you’ve taken.  
Highlight a video and press the Options soft key to  
choose from the following options:  
Play: plays the video.  
Send via: allows you to send the video via Picture message or  
Bluetooth.  
Delete: allows you to delete the selected video or delete  
Multiple videos.  
Move to memory card: allows you to move the video to the  
micro SD memory card.  
Copy to memory card: allows you to copy the video to the  
micro SD memory card.  
Rename: allows you to change the name of the video.  
Display mode: allows you to see your videos displayed in a  
Line view or in Thumbnail view.  
Bluetooth visibility: allows the selected video or multiple  
videos to be shared or released for the use of another Bluetooth  
device.  
Lock/Unlock: allows you to lock the video to protect it from  
deletion.  
Properties: displays the video Name, Date, Format, Size,  
Resolution and Protection.  
Memory card  
Select this option to see the videos that you have saved  
to your memory card.  
Section 9: Fun & Apps  
131  
Note: The Memory card option will only appear if a micro SD memory card  
has been inserted in your phone.  
Music  
My music  
This options allows you to access your MP3 files in  
your Music list.  
Note: MP3 bit rate is limited to 192Kbps.  
Memory card  
Select this option to see the music files that you have  
saved to your memory card.  
Note: The Memory card option will only appear if a micro SD memory card  
has been inserted in your phone.  
Other files  
This option allows you to view other types of files that  
you have stored on your phone. This includes Excel  
spreadsheets, text files, wmf files, PowerPoint  
presentations, PDFs, MHTML and Word documents.  
You can send these files by Bluetooth. You can also  
move or copy the files to your memory card.  
Memory card  
You can check the contents of your micro SD memory  
card and see what has been saved there. Press the Up or  
Down navigation keys to scroll between Sounds,  
Images, Videos, Music, and Other files.  
132  
   
My files  
After selecting a folder, press the Options soft key for  
the following options:  
Open: allows you to open the folder so you can access its  
contents.  
Create folder: allows you to create a new folder.  
Delete folder: allows you to delete a selected folder.  
Rename folder: allows you to rename a selected folder.  
Bluetooth visibility: allows the selected music file or multiple  
music files to be shared or released for the use of another  
Bluetooth device.  
Properties: lists the folder Name, Date, Format, Size, and  
Protection.  
Memory card info: lists the Memory card Capacity, Used  
space, and Free space.  
Note: The Memory card option will only appear if a micro SD memory card  
has been inserted in your phone.  
For more information on downloading files from your  
PC to your Memory card, contact your service provider.  
Memory status  
You can check the amount of memory being used and  
memory remaining for sounds, music, images, videos,  
and other files. You can select Phone or Memory card.  
Press the Left or Right navigation keys to scroll  
between size.  
Section 9: Fun & Apps  
133  
Games  
You can download MIDlets (Java applications that run  
on mobile phones) from various sources using t-zones  
and store them in your phone.  
When you access the Games menu, the list of default  
games appears. Once you have downloaded games,  
they are added to the list.  
Note: Java services may not be available, depending on your service  
provider.  
Get more games  
You can download more games from the website preset  
by your service provider using the Get more games  
option.  
My games  
1. Scroll to the MIDlet you want on the Games list and press  
the  
key.  
2. The startup screen of the MIDlet will be displayed along  
with game options. Use the Navigation keys to scroll  
between options. Press the  
key to make a selection.  
3. The startup screen of the MIDlet will be displayed along  
with game options.  
4. To select options, press the Options soft key on the  
Games list. Use the Navigation keys to scroll between  
options. Press the  
key to make a selection.  
Note: MIDlet game options will differ depending on the MIDlet you select.  
134  
   
Music player  
Music player  
The Music Player can be used to play files you have  
loaded from your PC to your micro SD memory card.  
Note: The following characters cannot be used in the filename:  
< > “ ? / \ : * |  
1. In the Fun & Apps menu, select Music player and  
press  
the Select soft key or the  
key.  
2. Before you select an MP3, press the Options soft key to  
select from the following options:  
Add music from: allows you to add music from your  
Phone or memory card.  
Settings: allows you to set these settings; Repeat mode,  
Shuffle, Equalizer, Visualization, Backlight, and Volume.  
3. Highlight the Add music from option and press the  
Select soft key or the  
key.  
4. Depending on where your MP3s are stored, highlight the  
Phone or Memory card option and press the Select soft  
key or the  
key.  
5. Press the Up or Down navigation keys to highlight the  
song or songs you want to listen to. Press the  
check mark the songs.  
key to  
6. Press the Add soft key. The marked songs will be added  
to your Music list.  
Section 9: Fun & Apps  
135  
   
7. Press the Options soft key and highlight the Play option.  
Press the Select soft key or the  
key to play your  
music.  
8. While listening to an MP3, press the Options soft key for  
the following options:  
Pause: allows you to pause the song you are listening to.  
Press the  
to resume the song.  
Open playlist: allows you to open My playlist or Current  
playlist.  
Remove from playlist: removes the MP3 from your  
current playlist.  
Settings: allows you to set these settings; Repeat Mode,  
Shuffle, Equalizer, Visualization, Backlight, and Volume.  
Properties: allows you to view MP3 Name, Date, Format,  
Bitrate, Length, Size, and Protection.  
Camera  
For information on using your camera and camcorder,  
Voice recognition  
VoiceSignal is advanced speech recognition  
software that can be used to activate a wide-variety  
of functions on your phone. VoiceSignal software  
automatically voice activates all contacts for voice  
dialing and searching, no pre-recording or training  
needed. Speak phone numbers naturally to dial, and  
use voice commands to launch applications and  
navigate phone menus.  
136  
         
Voice recognition  
VoiceSignal Options  
The following is a list of functions that you can  
perform using VoiceSignal speech recognition on  
your phone.  
Call <Name or #>: dial by saying either a Name or a number in  
your Contact list  
Send text <Name>: send a text message to a number or to  
someone in your Contact list.  
Lookup <Name>: open the contact record for any name in  
your Contact list.  
Go to <App>: open any application installed on your device.  
Check <Item>: provides details of your status, battery, signal  
strength, network coverage and my phone number.  
Call Digit Dialing  
Digit Dial allows you to dial any phone number by  
simply speaking the digits into the phone. No  
training is necessary, and Digit Dial is programmed  
to understand natural speech.  
1. Access VoiceSignal by doing one of the following:  
Press and hold the  
key.  
Press and hold the Multi-Function button on a plug-in  
headset or a Bluetooth headset.  
In the Fun & Apps menu, select Voice recognition and  
press the Select soft key or the  
key.  
After a brief pause, a list of optional commands appears  
in the display (and the “Say a command” message  
appears in the external display) and the audio prompt  
“Say a command” plays through the earpiece.  
Section 9: Fun & Apps  
137  
   
2. To use Digit Dialing, say “Call” and the area code and  
number that you want to dial at a distance of 3-12 inches  
from the phone in a natural voice.  
3. The number that you said is repeated through the  
earpiece and your phone dials the number.  
4. If VoiceSignal is not sure of the number that you said, a  
list of possible matches appears in the display.  
5. You’re asked to confirm the correct number as  
VoiceSignal displays the results. Say “Yes” or “No” to  
confirm or reject the number when prompted.  
Call Name Dialing  
To use Name Dial, you’ll need to have entries stored  
Your Phonebook” on page 59 for information on  
creating Phonebook entries.  
1. Access VoiceSignal by doing one of the following:  
Press and hold the  
key.  
Press and hold the Multi-Function button on a plug-in  
headset or a Bluetooth headset.  
In the Fun & Apps menu, select Voice recognition and  
press the Select soft key or the  
key.  
After a brief pause, a list of optional commands appears  
in the display (and the “Say a command” message  
appears in the external display) and the audio prompt  
“Say a command” plays through the earpiece.  
2. To use Name Dialing, say “Call” and the name of the  
contact that you want to dial.  
138  
 
Voice recognition  
3. The name that you said is repeated through the earpiece  
and your phone dials the number.  
4. If VoiceSignal is not sure of the name that you said, a list  
of possible matches appears in the display.  
5. You’re asked to confirm the correct number as  
VoiceSignal displays the results. Say “Yes” or “No” to  
confirm or reject the number when prompted.  
6. The location is repeated through the earpiece and your  
phone dials the number.  
Send Text Message  
1. In the Fun & Apps menu, select Voice recognition and  
press the Select soft key or the key.  
2. A list of commands appears in the display and the audio  
prompt “Say a command” plays through the earpiece.  
3. Say “Send Text” at a distance of 3-12 inches from the  
microphone. “Say the Name or Number” plays through  
the earpiece.  
4. After you say a name or number, you might be prompted,  
“Did you say?” To confirm a name or number, wait for  
the beep and then say “Yes.”  
5. You can also choose the correct name or number from  
the choice list using the phone’s arrow keys.  
6. The Text Message client is launched. Enter your text  
message.  
Name Lookup  
To perform a name lookup, you’ll need to have some  
entries in your Contact list.  
Section 9: Fun & Apps  
139  
   
1. Access VoiceSignal by doing one of the following:  
Press and hold the key.  
Press and hold the Multi-Function button on a plug-in  
headset or a Bluetooth headset.  
In the Fun & Apps menu, select Voice recognition and  
press the Select soft key or the  
key.  
After a brief pause, a list of optional commands appears  
in the display (and the “Say a command” message  
appears in the external display) and the audio prompt  
“Say a command” plays through the earpiece.  
2. Say “Lookup” at a distance of 3-12 inches from the  
microphone. “Say the name” plays through the earpiece.  
3. Say the name exactly as it is displayed in your Contact  
list, first name followed by last name.  
4. The contact name appears in the display with other  
information that you’ve entered for that contact.  
Opening Applications  
You can open an application or access a menu on  
your phone using VoiceSignal.  
1. Access VoiceSignal by doing one of the following:  
Press and hold the  
key.  
Press and hold the Multi-Function button on a plug-in  
headset or a Bluetooth headset.  
In the Fun & Apps menu, select Voice recognition and  
press the Select soft key or the  
key.  
140  
 
Voice recognition  
After a brief pause, a list of optional commands appears  
in the display (and the “Say a command” message  
appears in the external display) and the audio prompt  
“Say a command” plays through the earpiece.  
2. Say “Go To” at a distance of 3-12 inches from the  
microphone. A list of options displays and a prompt of  
“Please choose” plays through the earpiece. If the option  
you desire is not listed, say “Next Menu” to scroll to the  
next page.  
3. The menu option spoken opens.  
Checking Phone Status  
Use the Check command to see and hear status  
information from your phone, including its phone  
number, status, current signal strength, network  
coverage, and battery level.  
To check phone status:  
1. Access VoiceSignal by doing one of the following:  
Press and hold the  
key.  
Press and hold the Multi-Function button on a plug-in  
headset or a Bluetooth headset.  
In the Fun & Apps menu, select Voice recognition and  
press the Select soft key or the  
key.  
After a brief pause, a list of optional commands appears  
in the display (and the “Say a command” message  
appears in the external display) and the audio prompt  
“Say a command” plays through the earpiece.  
Section 9: Fun & Apps  
141  
 
2. Say “Check” at a distance of 3-12 inches from the  
microphone. A list of options displays and a prompt of  
“Please choose” plays through the earpiece.  
3. The phone status menu option spoken is displayed.  
Voice recognition settings  
You can adjust the settings and preferences for  
VoiceSignal by opening the Voice recognition  
settings menu.  
To access the VoiceSignal Settings menu, while in the  
VoiceSignal application, follow these steps:  
1. Press the Settings soft key.  
2. Use the navigation keys to select the setting you want to  
change.  
The following options are available:  
Choice Lists: if VoiceSignal is not absolutely confident that it  
has correctly identified a name or number, it can display a  
choice list of up to three possibilities, and prompt you to  
confirm the correct one. You can control when choice lists  
appear by changing the Choice Lists setting to the following:  
Automatic: VoiceSignal displays a choice list when it is not  
confident it has identified the correct choice from among  
multiple alternatives.  
Always On: when there are multiple alternatives, VoiceSignal  
always displays a choice list.  
Always Off: VoiceSignal never displays a choice list. Instead,  
the application picks the best from among the possible  
choices.  
Sensitivity: in VoiceSignal, sensitivity controls the balance  
between rejecting too much, which means the phone  
142  
   
Voice recognition settings  
frequently does not recognize names, numbers, or commands,  
and rejecting too little, which means it frequently recognizes  
something even if nothing was said. When VoiceSignal rejects  
an utterance, it displays a message such as “Please repeat…”  
or “No match found.” If you frequently experience these  
messages, you might be able to get better recognition by  
adjusting the Sensitivity setting toward Reject Less. If you  
frequently experience false activations (VoiceSignal detects a  
wrong match), you might be able to get better performance by  
adjusting the Sensitivity setting toward Reject More.  
Digit Dialing: use the Digit Dialing menu to adapt digit dialing  
to your voice.  
Adapt Digits: lets you adapt digits, which can improve  
voice recognition of phone numbers. Adaptation takes about  
60 seconds.  
Reset Digits: erases any digit adaptation you have done  
and resets digit recognition to the factory default. If you have  
not adapted digits, this option is grayed out.  
Sound: you can customize the VoiceSignal user interface by  
turning playback on or off for prompts, names, and numbers.  
You can also change the speed and volume of name playback.  
Prompts: turns playback on or off for prompts such as  
“Please say a command.”  
Digits: turns playback on or off for digits, for example, when  
confirming a phone number.  
Names: turns playback on or off for names.  
Name settings: adjusts the Speed and Volume of name  
playback.  
Speakerphone: turns the Speakerphone on or off when  
voice recognition is started.  
About: displays information about VoiceSignal including Version  
number, Build number, and Device number.  
Section 9: Fun & Apps  
143  
Organizer  
The Organizer allows you to set alarms, schedule  
appointments, view the calendar, create tasks, perform  
simplemathcalculations,checkworldtime,performunit  
conversions, set a timer, and use a stopwatch.  
Alarm  
This feature allows you to:  
set up to 3 alarms to ring at specified times.  
set the phone to switch on automatically and ring the alarm  
even if the phone is switched off.  
The following options are available:  
Wake up call: the alarm rings to wake you up in the morning.  
Alarm1: set the time and tone for this alarm.  
Alarm2: set the time and tone for this alarm.  
Auto power: alarm rings at the specified time even if the phone  
is turned off. If the option is set to Off and the phone is  
switched off at the specified time, the alarm does not ring.  
To set an alarm:  
1. Highlight the alarm you would like to set and press the  
Select soft key or the  
key.  
2. Highlight the Alarm option and press the Right  
navigation key to set Alarm to On.  
3. Press the Down key to highlight the Alarm time option.  
Enter the time you want the Alarm to sound.  
4. Press the Down key to highlight the AM/PM option.  
Press the Left or Right navigation key to set to AM or  
PM.  
144  
     
Organizer  
5. Press the Down key to highlight the Repeat option.  
Press the Left or Right navigation key to set to Once,  
Everyday, Except weekend or Except sunday.  
6. Press the Down key to highlight the Alarm tone option.  
Press the  
locations.  
key to bring up a list of alarm tone  
7. Press the Up or Down Navigation key to highlight an  
alarm tone location. Choose between My sounds, Music,  
Voice list, Music, or Default sounds. Press the Select  
soft key or the  
key.  
8. Press the Up or Down Navigation key to select an alarm  
tone. Press the Select soft key or the  
key.  
9. Press the Save soft key.  
10. Press the  
key to return to Idle mode.  
Note: Your phone is preset to a 12-hour format. To change the time format,  
11. To stop the alarm when it rings, press any key.  
Calendar  
With the Calendar feature, you can:  
consult the calendar by month, week, or day.  
set schedules and note anniversaries.  
make a Task.  
write memos to keep track of your schedule.  
set an alarm to act as a reminder, if necessary.  
check your memory status.  
Section 9: Fun & Apps  
145  
 
When you select the Calendar menu, the following  
options are available:  
Month view  
When you select this option, the calendar displays the  
selected month with today’s date highlighted.  
At the bottom of the calendar, the following icons are  
displayed along with the number of entries for each:  
Schedule items  
Anniversary events  
Miscellaneous items  
The number of entries next to each icon reflects the  
number of entries for the selected day on the calendar.  
The following options are available when you press the  
Options soft key:  
View mode: allows you to select between Day view or Week  
view of the selected day.  
Create: allows you to create a Schedule, Anniversary, or  
Miscellaneous event.  
Go to: allows you to see the Month view with today’s date  
highlighted or a specified date.  
Delete: allows you to delete all events for a selected date,  
delete all events for a specified period, or delete all events for  
This month dates. You can also delete all events.  
Week view  
When you select this option, the calendar displays the  
selected week with today’s date and time highlighted.  
146  
Organizer  
The following options are available when you press the  
Options soft key:  
View mode: allows you to select between Day view or Month  
view of the selected day.  
Create: allows you to create a Schedule, Anniversary, or  
Miscellaneous event.  
Go to: allows you to see the Week view with today’s date  
highlighted or a specified date.  
Delete: allows you to delete all events for a selected date,  
delete all events for preceding dates, or delete all events for  
this Week dates. You can also delete all events.  
Day view  
When you select this option, you are taken to the Day  
view of the selected day with any events listed. The  
following options are available when you press the  
Options soft key:  
View: allows you to view the event scheduled for this day.  
Create: allows you to create a Schedule, Anniversary, or  
Miscellaneous event.  
Send via: allows you to send the event via Text message,  
Picture message, or a Bluetooth device.  
View mode: allows you to select between Month view or Week  
view of the selected day.  
Delete: allows you to delete the Selected event, This day event,  
or All events scheduled on your calendar.  
Schedule  
This option allows you to write memos to a schedule.  
1. From Month, Week, or Day View, press the Options soft  
key. Highlight the Create option and press the Select  
Section 9: Fun & Apps  
147  
soft key or the  
2. Highlight the Schedule option and press the Select soft  
key or the key.  
key.  
3. Enter the subject in the Subject text box then press the  
Down soft key.  
4. Continue to enter other information including Details,  
Start date, Start time, AM/PM, Due date, End time, AM/  
PM, Location, Alarm, Before, Alarm tone. Check the  
Repeat box using the  
key if you want to repeat the  
alarm, then enter the repetition frequency (Everyday,  
Every week, or Every month) and the Until date.  
5. When you are finished, press the Save soft key.  
Your information is saved to the Schedule.  
Anniversary  
This option allows you to record Anniversaries in your  
calendar. You can also set an alarm to remind you of  
important anniversaries.  
1. From Month, Week, or Day View, press the Options soft  
key. Highlight the Create option and press the Select  
soft key or the  
2. Highlight the Anniversary option and press the Select  
soft key or the key.  
key.  
3. Enter the occasion in the Occasion text box then press  
the Down soft key.  
4. Continue to enter other information including Date,  
Alarm, Before, Alarm time, AM/PM, Alarm tone, and  
whether or not to Repeat every year.  
148  
Organizer  
5. When you are finished, press the Save soft key.  
Your Anniversary information is saved to the Calendar.  
Miscellaneous  
This option allows you to record miscellaneous dates or  
events in your calendar.  
1. From Month, Week, or Day View, press the Options soft  
key. Highlight the Create option and press the Select  
soft key or the  
2. Highlight the Miscellaneous option and press the  
Select soft key or the key.  
key.  
3. Enter the subject in the Subject text box then press the  
Down soft key.  
4. Continue to enter other information including Details,  
Start date, Start time, AM/PM, Due date, End time, and  
AM/PM.  
5. When you are finished, press the Save soft key.  
Your Miscellaneous information is saved to the Calendar.  
Missed alarm events  
You can check on all of the events that you have set an  
alarm on.  
1. Highlight the Missed alarm events option and press the  
Select soft key or the  
2. To view an event information, highlight an event and  
press the key. If no alarm events have been missed,  
key.  
0 Missed is displayed.  
The missed alarm event information is displayed.  
Section 9: Fun & Apps  
149  
3. To acknowledge and remove the event, press the  
Confirm soft key or the key.  
The event will be removed from the Missed alarm events  
menu.  
Memory status  
This option displays the number of Calendar, Schedule,  
Anniversary, and Miscellaneous events and the amount  
of memory that they use.  
Tasks  
You can use the Tasks function to in the same way you  
would use a written task list. When the task has been  
completed, you can check it off as done.  
To enter tasks into your Organizer, follow these steps:  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon.  
Press the Select soft key or the  
key to enter the  
menu.  
3. Highlight Organizer and press the Select soft key or the  
key.  
4. Highlight Tasks and press the Select soft key or the  
key.  
5. The first time you enter the task menu, it will be empty.  
Press the Options soft key and highlight the Create  
option. Press the Select soft key or the  
key.  
6. In the Task text box, enter your task. It can be up to 160  
characters long.  
150  
 
Organizer  
7. Press the Down Navigation key and highlight the Start  
date option. If you want to have a start date, press the  
key to check the box then use the Down key to  
highlight the Start date text box. Enter the start date.  
8. Scroll down and repeat step 7 for the Due date.  
9. Scroll down and highlight the Priority option. Use the  
Left or Right Navigation keys to select High, Normal, or  
Low.  
10. Press the Save soft key.  
To see your Task list, you can go to the Task option in  
the Organizer or you can see each task under Day view  
of the calendar for the day it was started.  
To mark a task as Done:  
1. Select the task in the task list.  
2. Press the Options soft key and highlight the Done  
option. Press the Select soft key or the  
3. The task will have a check mark after it in the Task list.  
Calculator  
key.  
With this feature, you can use the phone as a calculator.  
The calculator provides the basic arithmetic functions;  
addition, subtraction, multiplication, and division.  
1. Enter the first number using the numeric keys.  
2. Enter the operation for your calculation by pressing the  
following navigation keys:  
Left: subtraction (-)  
Right: addition (+)  
Up: multiplication (x)  
Section 9: Fun & Apps  
151  
 
Down: division (÷)  
3. The Left soft key can be used to create a decimal point  
and left and right brackets.  
4. Enter the next number.  
5. To view the result, press the  
Repeat steps 1 to 5 as many times as required.  
World time  
key.  
This feature allows you to find out what time it is  
another part of world, using the Left and Right  
Navigation keys.  
There are two time lines available. You can set the first  
setting to your home city and then use the second  
setting to check other city times.  
Press the Options soft key for the following options:  
Save: this allows you to save your world time settings.  
Set daylight saving time: use the  
key to place a check  
mark next to the cities that you want to set daylight savings  
time. Each city listed represents a time zone.  
Unit conversion  
The Unit conversion menu provides the following  
conversion categories:  
Currency  
Length  
Weight  
Volume  
Area  
152  
   
Organizer  
Temperature  
To convert any of the above categories, do the  
following:  
1. Scroll to the conversion feature you wish to use and  
press the Select soft key or the key.  
2. Enter the quantity you want converted in the upper text  
box.  
Note: To include a decimal point, press the  
key.  
3. Use the Up, Down, Left, and Right navigation keys to  
select the From and To units of money or measure for  
the quantity you want converted.  
The converted quantity appears in the lower text box.  
Timer  
You can use this menu to set a timer. To enable the  
Timer, use the following options:  
1. Press the Set soft key to enter the length of time.  
2. Enter the time and press the OK soft key.  
3. Press the  
key to start the timer. Press the  
key  
again to stop the timer.  
Stopwatch  
This feature allows you to use a stopwatch. Press the  
key to start the stopwatch. Press the Reset soft key  
to erase all stopwatch times recorded. Press the  
for the lap time. You can have up to 4 lap times.  
key  
Section 9: Fun & Apps  
153  
   
154  
Section 10: Camera and Camcorder  
Topics Covered  
• Using the Camera and Camcorder  
• Take and send  
• Record video  
• My photos  
• My videos  
• My Album  
• My Journal  
This section explains how to use the camera and  
camcorder on your phone. You can take photos and  
video clips using the built-in camera and camcorder.  
Section 10: Camera and Camcorder  
155  
       
Using the Camera and Camcorder  
Using the camera/camcorder module in your phone,  
you can take photos or video clips of people or events  
while on the move. Additionally, you can send photos  
and video clips to other people in a Picture Messaging  
message or set a wallpaper or caller ID image.  
Note:  
Do not take photos or videos of people without their permission.  
Do not take photos or videos in places where cameras are not allowed.  
Do not take photos or videos in places where you may interfere with  
another person’s privacy.  
Take and send  
Your camera produces photos in JPEG format.  
Note: When you take a photo in direct sunlight or in bright conditions,  
shadows may appear on the photo.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon.  
Press the Select soft key or the  
key to enter the  
menu.  
3. Using the Navigation keys, scroll to the Camera option.  
Press the Select soft key or the  
key to enter the  
menu.  
4. Highlight Take and Send and press the Select soft key  
or the key.  
156  
     
Take and send  
Note: Steps 1–4 can be bypassed by pressing the Up navigation key or the  
Camera key while in Idle mode.  
5. Adjust the image by aiming the camera at the subject.  
Press the Left soft key to access the camera options. For  
can use the keypad to quickly change the camera  
options.  
6. Press the  
key to take the photo. Send to My Album?  
is displayed. Press the Yes soft key if you want to send  
the photo to your T-Mobile My Album service. The  
phone’s default destination is set to My Album. The  
photo is automatically saved in My photos in the phone.  
Note: To change the default destination for your pictures, press the  
Options soft key when Send to My Album? appears on the display.  
Highlight the Default destination option. You can then Remove your  
default destination or Replace it with a Recent recipients, Phonebook, New  
recipient, My Album destination, or My Journal destination.  
7. To use the photo options, press the Options soft key.  
8. To return to Capture mode, select Take another.  
9. To return to Idle mode, press the  
key.  
Using Camera Options  
In Capture mode, you can use various options for the  
camera by pressing the Left soft key.  
The following options are available:  
Record video: switches from camera to camcorder.  
Section 10: Camera and Camcorder  
157  
 
Shooting mode: allows you to Take a photo in various modes.  
Once you change the mode, the corresponding indicator  
appears at the top left of the display. The following modes are  
available:  
Single shot: allows you to Take a photo normally and have it  
Automatically saved.  
Multi-shot: allows you to take a series of action stills. Select  
the capture speed, High Speed or Normal Speed, and the  
number of photos the camera will take. When you press the  
key, the camera takes photos successively.  
Mosaic style: allows you to take several photos to combine  
in a mosaic.  
Effects: allows you to change the color tone or apply special  
effects to the photo.  
Frames: allows you to select a decorative frame. Select a frame  
from the list using the Navigation keys and press the  
to save your setting.  
key  
Timer: allows you to set a time delay before the camera takes  
the photo. Select the length of delay you want. When you press  
key, the camera takes the photo after the specified time  
has elapsed.  
Go to My photos: takes you to your My photos folder.  
Settings: allows you to change the image settings.  
Size: allows you to set the image size to either  
SXGA(1280X1024), Mega(1152X864), SVGA(800X600),  
VGA(640X480), QVGA(320X240), or Mobile(176X144). The  
selected image size displays on the capture screen.  
Viewfinder: allows you to set the viewfinder to Full screen or  
Actual screen.  
Shutter sound: allows you to select a tone for the shutter  
sound. Choose between 4 tones.  
Zoom sound: allows you to turn zoom sound On or Off.  
158  
Take and send  
Brightness sound: allows you to turn brightness sound On  
or Off.  
Default name: allows you to change the default name  
assigned to your Photo.  
Camera shortcuts: shows you how to change Camera options  
using your keypad.  
Camera-Camcorder Shortcuts  
The following shortcuts are available:  
KEY  
CAMERA MODE  
CAMCORDER MODE  
Up and Down navigation keys adjust the image brightness.  
Left and Right navigation keys zoom in and out.  
Takes the photo.  
Turns the video recording on or  
off.  
Up volume key flips the image vertically.  
Down volume key the image horizontally.  
Changes from camera to camcorder or camcorder to camera.  
Changes the picture/video resolution.  
Changes the camera shot/recording mode.  
Changes the color tone or applies a special effect to the photo/  
video.  
Selects a decorative frame.  
Sets a time delay.  
Turns the video sound on or off.  
Section 10: Camera and Camcorder  
159  
 
KEY  
CAMERA MODE  
CAMCORDER MODE  
Takes you to My Photos menu. Takes you to My videos menu.  
Changes capture mode to full screen.  
Record video  
Your camcorder produces videos in 3GP format.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon.  
Press the Select soft key or the  
key to enter the  
menu.  
3. Using the Navigation keys, scroll to the Camera option.  
Press the Select soft key or the  
key to enter the  
menu.  
4. Highlight Record video and press the Select soft key or  
the key.  
5. Adjust the image by aiming the camcorder at the subject.  
Press the Left soft key to access the camcorder options.  
You can use the keypad to quickly change the camcorder  
options.  
6. To start recording your video clip, press the  
key.  
7. To stop the recording, press the Right soft key. The video  
clip is automatically saved in the My videos folder.  
8. To delete the video clip, press the Options soft key,  
highlight Delete, press the Select soft key or the  
key, then press the Yes soft key.  
160  
   
Record video  
To return to Idle mode, press the  
To access camcorder options, press the Left soft key.  
Using Camcorder Options  
key.  
In Capture mode, you can use various options for the  
camcorder by pressing the Left soft key.  
The following options are available:  
Take picture: allows you to take a photo in camera mode.  
Effects: allows you to change the color tone or apply special  
effects to the video clip.  
Timer: allows you to set a time delay before the camcorder  
takes the video clip. Select the length of delay you want. When  
you press the  
key, the camcorder records the video after  
the specified time has elapsed.  
Go to My videos: takes you to your My videos folder where you  
can view your videos.  
Settings: allows you to change the recording settings.  
Recording mode: allows you to set to Normal or Limit for  
message to keep the video shorter.  
Size: allows you to set the image size to either  
QICF(176X144), or SQCIF(128X96). The selected image size  
displays on the capture screen.  
Viewfinder: allows you to set the view finder to Full screen  
view or Actual screen.  
Audio record: allows you to be able to record sounds with  
your video. Set to On or Off.  
Zoom sound: allows you to turn zoom sound On or Off.  
Brightness sound: allows you to turn the brightness sound  
On or Off.  
Default name: allows you to change the default name  
assigned to your Video.  
Section 10: Camera and Camcorder  
161  
Camcorder shortcuts: shows you how to change Camcorder  
Shortcuts” on page 159 for a list of available short cuts.  
My photos  
1. In Idle mode press the Menu soft key to access the Menu  
mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon.  
Press the Select soft key or the  
key to enter the  
menu.  
3. Highlight the Camera option and press the Select soft  
key or the key.  
4. Select My photos and press the Select soft key or the  
key.  
When you access this menu, your phone displays the  
photos in Line view, which shows them as small images.  
Use the Navigation keys to scroll through the photos.  
5. To view the photos on the full screen, press the  
key.  
To go back to Line view, press the Back soft key or the  
key.  
6. You can use the Left and Right navigation keys to scroll  
through your photos.  
My photos options  
In the My photos menu, press the Options soft key to  
use the following options:  
View: allows you to view the photo on your display.  
Send to My Album: allows you to send the photo to My Album.  
Send via: allows you to send the photo via Picture message or  
Bluetooth.  
162  
   
My photos  
Set as: allows you to set the photo as your wallpaper or as a  
Caller ID.  
Default destination: allows you to Remove or Replace the  
default destination.  
Delete: allows you to delete the Selected photo or to delete  
Multiple photos.  
Move to memory card: allows you to move the selected photo  
or all photos to your micro SD memory card.  
Copy to memory card: allows you to copy the selected photo  
to your micro SD memory card.  
Rename: allows you to change the name of the photo.  
Display mode: allows you to see your photos displayed in a  
Line view or in Thumbnail view.  
Slide show: allows you to see all of your photos in a slide show  
presentation.  
Bluetooth visibility: allows the photo to be shared or released  
for the use of another Bluetooth device.  
Lock: allows you to protect the photo from being deleted.  
Properties: shows the properties of the photo, such as the  
Name, Date, Format, Size, Resolution, and Protection status.  
Deleting a Photo  
You can delete photos one by one or all at one time.  
1. From the My photos menu, select the photo you want to  
delete and press the Options soft key. Highlight the  
Delete option and press the Select soft key or the  
key.  
2. Highlight the Selected option and press the Select soft  
key or the  
key. Or, highlight Multiple to delete more  
than one photo or to delete All photos.  
Section 10: Camera and Camcorder  
163  
3. At the “Delete?” prompt, press the Yes soft key to  
confirm the deletion or No to cancel.  
4. When you have finished, press the  
key.  
My videos  
1. In Idle mode press the Menu soft key to access the Menu  
mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon.  
Press the Select soft key or the  
key to enter the  
menu.  
3. Highlight the Camera option and press the Select soft  
key or the key.  
4. Select My videos and press the Select soft key or the  
key.  
When you access this menu, your phone displays the  
video clips in Thumbnail mode, which shows them as  
small images. Use the Navigation keys to scroll through  
the video clips.  
5. To view the video clips on the full screen, press the  
key.  
My videos Options  
In the My videos menu, press the Options soft key to  
use the following options:  
Play: allows you to view the video clip on your display.  
Send via: allows you to send the video as part of a Picture  
message or Bluetooth.  
Delete: allows you to delete the Selected video clip or delete  
Multiple video clips.  
164  
   
My videos  
Move to memory card: allows you to move the video to your  
micro SD memory card.  
Copy to memory card: allows you to copy the video to your  
micro SD memory card.  
Rename: allows you to change the name of the video clip.  
Display mode: allows you to see your videos displayed in a  
Line view or in Thumbnail view.  
Bluetooth visibility: allows the video (or all videos) to be  
shared or released for the use of another Bluetooth device.  
Lock: allows you to protect the video clip from being deleted.  
Properties: shows the properties of the video clip, such as the  
Name, Date, Format, Size, Resolution, and Protection status.  
Deleting a Video Clip  
You can delete video clips one by one or all at one time.  
1. From the My videos menu, use the Up or Down  
Navigation key to highlight the video you want to delete  
and press the Options soft key.  
2. Highlight the Delete Option, then press the Select soft  
key or the  
key.  
3. Highlight Selected if you only want to delete the video  
clip that you selected. Highlight Multiple if you want to  
delete more than one or all video clips.  
4. Press the Select soft key or the  
key.  
5. At the “Delete?” prompt, press the Yes soft key to  
confirm the deletion, or No to cancel.  
6. Press the  
key to return Idle mode.  
Section 10: Camera and Camcorder  
165  
My Album  
My Album is a private online picture album that you  
can use to store and share pictures, videos, voice  
messages, and text.  
Use the following procedures to access My Album.  
Note: When accessing My Album, charges may apply.  
1. In Idle mode press the Menu soft key to access the Menu  
mode.  
2. Using the Navigation keys, scroll to the Fun & Apps icon.  
Press the Select soft key or the  
key to enter the  
menu.  
3. Highlight Camera and press the Select soft key or the  
key.  
4. Select My Album and press the Select soft key or the  
key. The browser is launched and the T-Mobile web  
page displays.  
5. Select the My Albums Menu link and press the  
6. Photos sent to this folder are stored in the Inbox Album.  
Highlight the Inbox Album link and press the key.  
key to view the  
key.  
Highlight a photo and press the  
photos.  
7. Press the  
key to exit t-zones and return to the Idle  
screen.  
166  
   
My Journal  
My Journal  
Make notes in My Journal, your online diary and  
weblog. Keep it private to store your personal  
memories, or send emails to invite people to view and  
comment on your album. See your service provider for  
more information.  
Note: When accessing My Journal, charges may apply.  
Section 10: Camera and Camcorder  
167  
   
168  
Section 11: t-zones  
Topics Covered  
• t-zones  
This section outlines the t-zones service on your phone.  
For more information, contact T-Mobile.  
Section 11: t-zones  
169  
 
t-zones  
Your phone is equipped with a WAP (Wireless  
Application Protocol) browser to allow you to access and  
navigate the wireless web using your phone.  
To access t-zones, follow these steps:  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Using the Navigation keys, scroll to the t-zones icon.  
Press the Select soft key or the  
key to enter the  
menu.  
The following options are available:  
Home  
Selecting this menu connects the phone to the network  
and loads the t-zones homepage.  
Note: You can enter t-zones without going through the t-zones menu by  
simply pressing the t-zones soft key while in Idle mode.  
The content of the t-zones startup homepage depends on  
your wireless web service provider. To scroll through the  
screen, use the Up and Down keys.  
Togotothestartuphomepagefromanyotherscreeninthe  
t-zones, use the Home option. For more information on  
the t-zones menus, see "Selecting and Using Menu  
Exiting the t-zones  
To exit the browser at any time, simply press the  
key.  
170  
     
t-zones  
Navigating the t-zones  
1. To scroll through browser items, press the Up or Down  
Navigation key.  
2. To select browser items, press the  
key. Or, press the  
Options soft key. Highlight the Select option and press  
the OK soft key.  
3. To return to the previous page, press the Options soft  
key. Highlight Go and press the Select soft key or the  
key. Highlight the Back option and press the Select  
soft key.  
4. To return to the startup homepage, press the Home soft  
key.  
Entering Text in t-zones  
Whenyouarepromptedtoentertext, thecurrentlyactive  
text input mode is indicated on the screen. The following  
modes are available:  
Upper-case character mode (A): allows you to enter upper-  
case English characters.  
Lower-case character mode (a): allows you to enter lower-  
case English characters.  
Note: You can enter symbols in upper-case or lower-case character mode  
by pressing the  
key.  
Number mode (1): allows you to enter numbers.  
To change the text input mode, use the following  
procedures:  
1. Press the Right soft key one or more times.  
2. To enter a space, press the  
key.  
Section 11: t-zones  
171  
   
3. To edit text, set the cursor to the right of the character(s)  
to be corrected.  
4. Press the  
key as required.  
5. Enter the correct character(s).  
Selecting and Using Menu Options  
Various menus are available when you are using t-zones  
to navigate the wireless web.  
To access the browser options menu:  
1. Press the Options soft key.  
Note: The menus may vary, depending on your version of t-zones.  
The following options are available:  
Go to homepage: takes you back at any time to the home page  
of the wireless web service provider.  
Go to URL: allows you to manually enter the URL address of a  
web page. After entering an address, press the  
there directly.  
key to go  
Go: allows you to navigate forward or backward to a web page.  
Reload: reloads the current page.  
Bookmarks: adds favorite pages to a list so you can have quick  
and easy access to them later.  
Send URL: allows you to send a URL in a text message.  
Inbox: takes you to your message Inbox.  
To smartFit view: allows you to change how a web page is  
viewed in the display. Choose either To smartFit view (default  
setting) or To Desktop view.  
Save: allows you to save internet images and/or web pages.  
172  
   
t-zones  
Page details: displays the URL address of the web page to  
which you are currently connected.  
Browser Options: allows you set browser options.  
Cache: a memory area where frequently accessed data can  
be stored for rapid access.  
Cache mode: choose from No cache, Net first, or Cache first.  
Clear cache: allows you to clear the information stored in the  
phone’s temporary memory which stores the most recently  
accessed web pages.  
Cookies: cookies are small text files of web pages stored on  
your phone.  
Cookie mode: allows you to Accept all, Reject all, or be  
prompted to accept a cookie.  
Delete cookies: allows you to delete cookies.  
Preferences: allows you set t-zones preferences.  
Certificates: allows you to view internet certificates.  
Root Certificate: provides several root certificates from which to  
choose.  
CA Certificate: provides several CA certificates from which to  
choose.  
About browser: displays information about the browser.  
Bookmarks  
This menu stores up to 100 URL addresses.  
To store a URL address:  
1. Select an empty location and press the Select soft key  
or the  
key.  
2. Enter a name for the favorite item in the Name text box  
and press the Down key.  
Section 11: t-zones  
173  
3. Enter the address in the URL text box and press the Save  
soft key.  
Note: For further details about how to enter characters, see "Section 5:  
After saving favorite items, you can access the following  
options by selecting the item, then pressing the Options  
soft key:  
Go to URL: takes you to the site.  
Edit: allows you to edit the address.  
Delete: allows you to delete the selected address or you can  
delete all addresses.  
Or, you can select the favorite item and press the  
Your browser will take you to the site.  
key.  
Go to URL  
ThismenuallowsyoutomanuallyentertheURLaddress  
of a website that you wish to access.  
Forfurtherdetailsaboutenteringcharacters, see"Section  
Clear Cache  
Youcancleartheinformationstoredinthecache,whichis  
the phone’s temporary memory which stores the most  
recently accessed web pages.  
At the Clear cache? prompt, press the Yes soft key to  
confirm the deletion. Otherwise, press the No soft key.  
174  
Section 12: Health and Safety  
Information  
Topics Covered  
• Health and Safety Information  
This section outlines the safety precautions associated  
with using your phone. These safety precautions should  
be followed to safely use your phone.  
Section 12: Health and Safety Information  
175  
   
Health and Safety Information  
Exposure to Radio Frequency (RF) Signals  
Certification Information (SAR)  
Your wireless phone is a radio transmitter and receiver. It  
isdesignedandmanufacturednottoexceedtheexposure  
limits for radio frequency (RF) energy set by the Federal  
Communications Commission (FCC) of the U.S.  
government.TheseFCCexposurelimitsarederivedfrom  
the recommendations of two expert organizations, the  
National Counsel on Radiation Protection and  
Measurement (NCRP) and the Institute of Electrical and  
Electronics Engineers (IEEE). In both cases, the  
recommendations were developed by scientific and  
engineering experts drawn from industry, government,  
and academia after extensive reviews of the scientific  
literature related to the biological effects of RF energy.  
The exposure limit set by the FCC for wireless mobile  
phones employs a unit of measurement known as the  
Specific Absorption Rate (SAR). The SAR is a measure of  
the rate of absorption of RF energy by the human body  
expressedinunitsofwattsperkilogram(W/kg).TheFCC  
requires wireless phones to comply with a safety limit of  
1.6 watts per kilogram (1.6 W/kg). The FCC exposure  
limit incorporates a substantial margin of safety to give  
additional protection to the public and to account for any  
variations in measurements.  
SAR tests are conducted using standard operating  
positions accepted by the FCC with the phone  
transmitting at its highest certified power level in all  
testedfrequencybands. AlthoughtheSARisdetermined  
176  
 
Health and Safety Information  
at the highest certified power level, the actual SAR level  
of the phone while operating can be well below the  
maximumvalue.Thisisbecausethephoneisdesignedto  
operate at multiple power levels so as to use only the  
power required to reach the network. In general, the  
closeryouaretoawirelessbasestationantenna,thelower  
the power output.  
Before a new model phone is available for sale to the  
public, it must be tested and certified to the FCC that it  
does not exceed the exposure limit established by the  
FCC. Tests for each model phone are performed in  
positions and locations (e.g. at the ear and worn on the  
body) as required by the FCC. For body worn operation,  
this model phone has been tested and meets FCC RF  
exposure guidelines when used with a Samsung  
accessory designated for this product or when used with  
anaccessorythatcontainsnometalandthatpositionsthe  
handset a minimum of 1.5 cm from the body. Use of other  
accessories may not ensure compliance with FCC RF  
exposure guidelines.  
The FCC has granted an Equipment Authorization for  
thismobile phonewithallreportedSAR levels evaluated  
as in compliance with the FCC RF exposure guidelines.  
The maximum SAR values for this model phone as  
reported to the FCC are:  
Head: 0.814 W/Kg.  
Body-worn: 0.699 W/Kg.  
SAR information on this and other model phones can be  
viewed on-line at www.fcc.gov/oet/fccid. To find  
information that pertains to a particular model phone,  
Section 12: Health and Safety Information  
177  
this site uses the phone FCC ID number which is usually  
printed somewhere on the case of the phone. Sometimes  
it may benecessary toremove the battery pack to find the  
number. Once you have the FCC ID number for a  
particular phone, follow the instructions on the website  
anditshouldprovidevaluesfortypicalormaximumSAR  
for a particular phone. Additional product specific SAR  
information can also be obtained at www.fcc.gov/cgb/  
sar.  
UL Certified Travel Adapter  
TheTravelAdapterforthisphonehasmetUL1310safety  
requirements. Please adhere to the following safety  
instructions per UL guidelines.  
FAILURE TO FOLLOW THE INSTRUCTIONS  
OUTLINED MAY LEAD TO SERIOUS PERSONAL  
INJURY AND POSSIBLE PROPERTY DAMAGE.  
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE  
INSTRUCTIONS.  
DANGER - TO REDUCE THE RISK OF FIRE OR  
ELECTRIC SHOCK, CAREFULLY FOLLOW THESE  
INSTRUCTIONS.  
FOR CONNECTION TO A SUPPLY NOT IN THE  
U.S.A., USE AN ATTACHMENT PLUG ADAPTOR OF  
THE PROPER CONFIGURATION FOR THE POWER  
OUTLET.  
Consumer Information on Wireless Phones  
The U.S. Food and Drug Administration (FDA) has  
published a series of Questions and Answers for  
consumers relating to radio frequency (RF) exposure  
178  
   
Consumer Information on Wireless Phones  
from wireless phones. The FDA publication includes the  
following information:  
What kinds of phones are the subject of this update?  
The term wireless phone refers here to hand-held  
wireless phones with built-in antennas, often called  
"cell," "mobile," or "PCS" phones. These types of wireless  
phones can expose the user to measurable radio  
frequency energy (RF) because of the short distance  
between the phone and the user's head. These RF  
exposures are limited by Federal Communications  
Commission safety guidelines that were developed with  
the advice of FDA and other federal health and safety  
agencies. When the phone is located at greater distances  
from the user, the exposure to RF is drastically lower  
because a person's RF exposure decreases rapidly with  
increasing distance from the source. The so-called  
"cordless phones," which have a base unit connected to  
the telephone wiring in a house, typically operate at far  
lower power levels, and thus produce RF exposures well  
within the FCC's compliance limits.  
Do wireless phones pose a health hazard?  
The available scientific evidence does not show that any  
health problems are associated with using wireless  
phones. There is no proof, however, that wireless phones  
are absolutely safe. Wireless phones emit low levels of  
radio frequency energy (RF) in the microwave range  
while being used. They also emit very low levels of RF  
wheninthestand-bymode.WhereashighlevelsofRFcan  
producehealtheffects(byheatingtissue),exposuretolow  
level RF that does not produce heating effects causes no  
known adverse health effects. Many studies of low level  
Section 12: Health and Safety Information  
179  
RFexposureshavenotfoundanybiologicaleffects. Some  
studies have suggested that some biological effects may  
occur, but such findings have not been confirmed by  
additionalresearch.Insomecases,otherresearchershave  
had difficulty in reproducing those studies, or in  
determining the reasons for inconsistent results.  
What is FDA's role concerning the safety of wireless  
phones?  
Under the law, FDA does not review the safety of  
radiation-emitting consumer products such as wireless  
phones before they can be sold, as it does with new drugs  
ormedicaldevices. However,theagencyhasauthorityto  
take action if wireless phones are shown to emit radio  
frequency energy (RF) at a level that is hazardous to the  
user.Insuchacase,FDAcouldrequirethemanufacturers  
ofwirelessphonestonotifyusersofthehealthhazardand  
torepair,replaceorrecallthephonessothatthehazardno  
longer exists.  
Although the existing scientific data do not justify FDA  
regulatory actions, FDA has urged the wireless phone  
industry to take a number of steps, including the  
following:  
Support needed research into possible biological effects of RF  
of the type emitted by wireless phones;  
Design wireless phones in a way that minimizes any RF  
exposure to the user that is not necessary for device function;  
and  
Cooperate in providing users of wireless phones with the best  
possible information on possible effects of wireless phone use  
on human health.  
180  
Consumer Information on Wireless Phones  
FDA belongs to an interagency working group of the  
federal agencies that have responsibility for different  
aspects of RF safety to ensure coordinated efforts at the  
federal level. The following agencies belong to this  
working group:  
National Institute for Occupational Safety and Health  
Environmental Protection Agency  
Federal Communications Commission  
Occupational Safety and Health Administration  
National Telecommunications and Information Administration  
The National Institutes of Health participates in some  
interagency working group activities, as well.  
FDA shares regulatory responsibilities for wireless  
phones with the Federal Communications Commission  
(FCC). All phones that are sold in the United States must  
comply with FCC safety guidelines that limit RF  
exposure. FCC relies on FDA and other health agencies  
for safety questions about wireless phones.  
FCC also regulates the base stations that the wireless  
phone networks rely upon. While these base stations  
operate at higher power than do the wireless phones  
themselves, the RF exposures that people get from these  
base stations are typically thousands of times lower than  
thosetheycangetfromwirelessphones. Basestationsare  
thus not the primary subject of the safety questions  
discussed in this document.  
Section 12: Health and Safety Information  
181  
What are the results of the research done already?  
The research done thus far has produced conflicting  
results, and many studies have suffered from flaws in  
their research methods. Animal experiments  
investigating the effects of radio frequency energy (RF)  
exposures characteristic of wireless phones have yielded  
conflicting results that often cannot be repeated in other  
laboratories. A few animal studies, however, have  
suggested that low levels of RF could accelerate the  
development of cancer in laboratory animals. However,  
many of the studies that showed increased tumor  
development used animals that had been genetically  
engineeredortreatedwithcancer-causingchemicalssoas  
to be pre-disposed to develop cancer in absence of RF  
exposure. Other studies exposedtheanimals toRFfor up  
to22hoursperday.Theseconditionsarenotsimilartothe  
conditions under which people use wireless phones, so  
we don't know with certainty what the results of such  
studies mean for human health.  
Three large epidemiology studies have been published  
since December 2000. Between them, the studies  
investigated any possible association between the use of  
wireless phones and primary brain cancer, glioma,  
meningioma, oracousticneuroma, tumorsofthebrainor  
salivary gland, leukemia, or other cancers. None of the  
studiesdemonstratedtheexistenceofanyharmfulhealth  
effects from wireless phones RF exposures. However,  
noneofthestudiescananswerquestionsaboutlong-term  
exposures, since the average period of phone use in these  
studies was around three years.  
182  
Consumer Information on Wireless Phones  
What research is needed to decide whether RF exposure  
from wireless phones poses a health risk?  
A combination of laboratory studies and  
epidemiologicalstudiesofpeopleactuallyusingwireless  
phones would provide some of the data that are needed.  
Lifetime animal exposure studies could be completed in  
a few years. However, very large numbers of animals  
would be needed to provide reliable proof of a cancer  
promoting effect if one exists. Epidemiological studies  
can provide data that is directly applicable to human  
populations, but ten or more years' follow-up may be  
needed to provide answers about some health effects,  
such as cancer. This is because the interval between the  
time of exposure to a cancer-causing agent and the time  
tumors develop - if they do - may be many, many years.  
The interpretation of epidemiological studies is  
hamperedbydifficultiesinmeasuringactualRFexposure  
during day-to-day use of wireless phones. Many factors  
affect this measurement, such as the angle at which the  
phone is held, or which model of phone is used.  
What is FDA doing to find out more about the possible  
health effects of wireless phone RF?  
FDA is working with the U.S. National Toxicology  
Program and with groups of investigators around the  
world to ensure that high priority animal studies are  
conducted to address important questions about the  
effects of exposure to radio frequency energy (RF).  
FDA has been a leading participant in the World Health  
OrganizationinternationalElectromagneticFields(EMF)  
Project since its inception in 1996. An influential result of  
Section 12: Health and Safety Information  
183  
this work has been the development of a detailed agenda  
ofresearchneedsthathasdriventheestablishmentofnew  
researchprogramsaroundtheworld.TheProjecthasalso  
helpeddevelopaseriesofpublicinformationdocuments  
on EMF issues.  
FDA and Cellular Telecommunications & Internet  
Association (CTIA) have a formal Cooperative Research  
andDevelopmentAgreement(CRADA)todoresearchon  
wireless phone safety. FDA provides the scientific  
oversight, obtaining input from experts in government,  
industry, and academic organizations. CTIA-funded  
research is conducted through contracts to independent  
investigators. The initial research will include both  
laboratory studies and studies of wireless phone users.  
The CRADA will also include a broad assessment of  
additional research needs in the context of the latest  
research developments around the world.  
What steps can I take to reduce my exposure to radio  
frequency energy from my wireless phone?  
If there is a risk from these products - and at this point we  
do not know that there is - it is probably very small. But if  
you are concerned about avoiding even potential risks,  
you can take a few simple steps to minimize your  
exposure to radio frequency energy (RF). Since time is a  
key factor in how much exposure a person receives,  
reducingtheamountoftimespentusingawirelessphone  
will reduce RF exposure.  
If you must conduct extended conversations by wireless phone  
every day, you could place more distance between your body  
and the source of the RF, since the exposure level drops off  
dramatically with distance. For example, you could use a  
184  
Consumer Information on Wireless Phones  
headset and carry the wireless phone away from your body or  
use a wireless phone connected to a remote antenna.  
Again, the scientific data do not demonstrate that  
wireless phones are harmful. But if you are concerned  
about the RF exposure from these products, you can use  
measures like those described above to reduce your RF  
exposure from wireless phone use.  
What about children using wireless phones?  
Thescientificevidencedoesnotshowadangertousersof  
wirelessphones,includingchildrenandteenagers. Ifyou  
want to take steps to lower exposure to radio frequency  
energy (RF), the measures described above would apply  
to children and teenagers using wireless phones.  
Reducing the time of wireless phone use and increasing  
the distance between the user and the RF source will  
reduce RF exposure.  
Some groups sponsored by other national governments  
have advised that children be discouraged from using  
wirelessphonesatall.Forexample,thegovernmentinthe  
United Kingdom distributed leaflets containing such a  
recommendation in December 2000. They noted that no  
evidence exists that using a wireless phone causes brain  
tumors or other ill effects. Their recommendation to limit  
wireless phone use by children was strictly  
precautionary;itwasnotbasedonscientificevidencethat  
any health hazard exists.  
Do hands-free kits for wireless phones reduce  
risks from exposure to RF emissions?  
Since there are no known risks from exposure to RF  
emissions from wireless phones, there is no reason to  
Section 12: Health and Safety Information  
185  
believe that hands-free kits reduce risks. Hands-free kits  
can be used with wireless phones for convenience and  
comfort. These systems reduce the absorption of RF  
energyintheheadbecausethephone, whichisthesource  
of the RF emissions, will not be placed against the head.  
On the other hand, if the phone is mounted against the  
waist or other part of the body during use, then that part  
of the body will absorb more RF energy. Wireless phones  
marketed in the U.S. are required to meet safety  
requirementsregardlessofwhethertheyareusedagainst  
the head or against the body. Either configuration should  
result in compliance with the safety limit.  
Do wireless phone accessories that claim to shield  
the head from RF radiation work?  
Since there are no known risks from exposure to RF  
emissions from wireless phones, there is no reason to  
believethataccessories that claim toshieldtheheadfrom  
thoseemissionsreducerisks.Someproductsthatclaimto  
shield the user from RF absorption use special phone  
cases, while others involve nothing more than a metallic  
accessoryattachedtothephone.Studieshaveshownthat  
these products generally do not work as advertised.  
Unlike "hand-free" kits, these so-called "shields" may  
interfere with proper operation of the phone. The phone  
may be forced to boost its power to compensate, leading  
to an increase in RF absorption. In February 2002, the  
FederaltradeCommission(FTC)chargedtwocompanies  
that sold devices that claimed to protect wireless phone  
users from radiation with making false and  
unsubstantiated claims. According to FTC, these  
186  
Consumer Information on Wireless Phones  
defendantslackedareasonablebasistosubstantiatetheir  
claim.  
What about wireless phone interference with  
medical equipment?  
Radio frequency energy (RF) from wireless phones can  
interact with some electronic devices. For this reason,  
FDA helped develop a detailed test method to measure  
electromagnetic interference (EMI) of implanted cardiac  
pacemakers and defibrillators from wireless telephones.  
This test method is now part of a standard sponsored by  
the Association for the Advancement of Medical  
instrumentation (AAMI). The final draft, a joint effort by  
FDA, medical device manufacturers, and many other  
groups, was completed in late 2000. This standard will  
allow manufacturers to ensure that cardiac pacemakers  
and defibrillatorsaresafefromwirelessphoneEMI. FDA  
has tested wireless phones and helped develop a  
voluntary standard sponsored by the Institute of  
Electrical and Electronic Engineers (IEEE). This standard  
specifiestestmethodsandperformancerequirementsfor  
hearing aids and wireless phones so that no interference  
occurs when a person uses a compatible phone and a  
compatible hearing aid at the same time. This standard  
was approved by the IEEE in 2000.  
FDA continues to monitor the use of wireless phones for  
possible interactions with other medical devices. Should  
harmfulinterferencebefoundtooccur,FDAwillconduct  
testing to assess the interference and work to resolve the  
problem.  
Section 12: Health and Safety Information  
187  
Additional information on the safety of RF exposures  
from various sources can be obtained from the following  
organizations:  
FCC RF Safety Program:  
http://www.fcc.gov/oet/rfsafety/  
Environmental Protection Agency (EPA):  
http://www.epa.gov/radiation/  
Occupational Safety and Health Administration's (OSHA):  
http://www.osha.gov/SLTC/radiofrequencyradiation/  
index.html  
National institute for Occupational Safety and Health (NIOSH):  
http://www.cdc.gov/niosh/topics/emf/  
World health Organization (WHO):  
http://www.who.int/peh-emf/  
International Commission on Non-Ionizing Radiation Protection:  
http://www.icnirp.de  
National Radiation Protection Board (UK):  
http://www.hpa.org.uk/radiation/  
Updated 4/3/2002: US Food and Drug Administration  
http://www.fda.gov/cellphones  
Road Safety  
Your wireless phone gives you the powerful ability to  
communicatebyvoice,almostanywhere,anytime.Butan  
important responsibility accompanies the benefits of  
wireless phones, one that every user must uphold.  
When driving a car, driving is your first responsibility.  
When using your wireless phone behind the wheel of a  
car, practice good common sense and remember the  
following tips:  
1. Get to know your wireless phone and its features, such  
188  
 
Road Safety  
as speed dial and redial. If available, these features help  
you to place your call without taking your attention off  
the road.  
2. When available, use a hands-free device. If possible,  
add an additional layer of convenience and safety to  
your wireless phone with one of the many hands free  
accessories available today.  
3. Position your wireless phone within easy reach. Be able  
to access your wireless phone without removing your  
eyes from the road. If you get an incoming call at an  
inconvenient time, let your Voice mail answer it for you.  
4. Let the person you are speaking with know you are  
driving; if necessary, suspend the call in heavy traffic or  
hazardous weather conditions. Rain, sleet, snow, ice and  
even heavy traffic can be hazardous.  
5. Do not take notes or look up phone numbers while  
driving. Jotting down a "to do" list or flipping through  
your address book takes attention away from your  
primary responsibility, driving safely.  
6. Dial sensibly and assess the traffic; if possible, place  
calls when you are not moving or before pulling into  
traffic. Try to plan calls when your car will be stationary.  
If you need to make a call while moving, dial only a few  
numbers, check the road and your mirrors, then  
continue.  
Section 12: Health and Safety Information  
189  
7. Do not engage in stressful or emotional conversations  
that may be distracting. Make people you are talking  
with aware you are driving and suspend conversations  
that have the potential to divert your attention from the  
road.  
8. Use your wireless phone to call for help. Dial 9-1-1 or  
other local emergency number in the case of fire, traffic  
accident or medical emergencies. Remember, it is a free  
call on your wireless phone!  
9. Use your wireless phone to help others in emergencies. If  
you see an auto accident, crime in progress or other  
serious emergency where lives are in danger, call 9-1-1  
or other local emergency number, as you would want  
others to do for you.  
10. Call roadside assistance or a special non-emergency  
wireless assistance number when necessary. If you see  
a broken-down vehicle posing no serious hazard, a  
broken traffic signal, a minor traffic accident where no  
one appears injured, or a vehicle you know to be stolen,  
call roadside assistance or other special non-emergency  
number.  
"The wireless industry reminds you to use your phone safely  
when driving."  
Formoreinformation,pleasecall1-888-901-SAFE,orvisit  
our web-site www.wow-com.com  
Provided by theCellularTelecommunications& Internet  
Association.  
190  
Operating Environment  
Operating Environment  
Remember to follow any special regulations in force in  
any area and always switch your phone off whenever it  
isforbiddentouseit,orwhenitmaycauseinterferenceor  
danger. When connecting the phone or any accessory to  
another device, read its user's guide for detailed safety  
instructions. Do not connect incompatible products.  
Aswithothermobileradiotransmittingequipment,users  
are advised that for the satisfactory operation of the  
equipment and  
for the safety of personnel, it is recommended that the  
equipment should only be used in the normal operating  
position (held to your ear with the antenna pointing over  
your shoulder if you are using an external antenna).  
Using Your Phone Near Other Electronic Devices  
Mostmodernelectronicequipmentisshieldedfromradio  
frequency (RF) signals. However, certain electronic  
equipment may not be shielded against the RF signals  
from your wireless phone. Consult the manufacturer to  
discuss alternatives.  
Pacemakers  
Pacemaker manufacturers recommend that a minimum  
distance of 15 cm (6 inches) be maintained between a  
wireless phone and a pacemaker to avoid potential  
interference with the pacemaker.  
These recommendations are consistent with the  
independent research and recommendations of Wireless  
Technology Research.  
Section 12: Health and Safety Information  
191  
   
Persons with pacemakers:  
should always keep the phone more than 15 cm (6 inches) from  
their pacemaker when the phone is switched on.  
should not carry the phone in a breast pocket.  
should use the ear opposite the pacemaker to minimize  
potential interference.  
If you have any reason to suspect that interference is  
taking place, switch your phone off immediately.  
Other Medical Devices  
Ifyouuseanyotherpersonalmedicaldevices,consultthe  
manufacturer of your device to determine if it is  
adequately shielded from external RF energy. Your  
physician may be able to assist you in obtaining this  
information.Switchyourphoneoffinhealthcarefacilities  
whenanyregulationspostedintheseareasinstructyouto  
do so. Hospitals or health care facilities may be using  
equipment that could be sensitive to external RF energy.  
Vehicles  
RF signals may affect improperly installed or  
inadequately shielded electronic systems in motor  
vehicles. Check with the manufacturer or its  
representative regarding your vehicle. You should also  
consultthemanufacturerofanyequipmentthathasbeen  
added to your vehicle.  
Posted Facilities  
Switchyourphoneoffinanyfacilitywherepostednotices  
require you to do so.  
192  
Potentially Explosive Environments  
Potentially Explosive Environments  
Switchyourphoneoffwheninanyareawithapotentially  
explosive atmosphere and obey all signs and  
instructions. Sparks in such areas could cause an  
explosion or fire resulting in bodily injury or even death.  
Users are advised to switch the phone off while at a  
refueling point (service station). Users are reminded of  
the need to observe restrictions on the use of radio  
equipment in fuel depots (fuel storage and distribution  
areas),chemicalplantsorwhereblastingoperationsarein  
progress.  
Areas with a potentially explosive atmosphere are often  
but not always clearly marked. They include below deck  
on boats, chemical transfer or storage facilities, vehicles  
using liquefied petroleum gas (such as propane or  
butane), areas where the air contains chemicals or  
particles, such as grain, dust or metal powders, and any  
other area where you would normally be advised to turn  
off your vehicle engine.  
Emergency Calls  
Thisphone,likeanywirelessphone, operatesusingradio  
signals, wireless and landline networks as well as user-  
programmed functions, which cannot guarantee  
connectioninallconditions. Therefore, youshouldnever  
rely solely on any wireless phone for essential  
communications (medical emergencies, for example).  
Remember,tomakeorreceiveanycallsthephonemustbe  
switched on and in a service area with adequate signal  
strength. Emergency calls may not be possible on all  
Section 12: Health and Safety Information  
193  
   
wireless phone networks or when certain network  
services and/or phone features are in use. Check with  
local service providers.  
To make an emergency call:  
1. If the phone is not on, switch it on.  
2. Key in the emergency number for your present location  
(for example, 911 or other official emergency number).  
Emergency numbers vary by location.  
3. Press the  
key.  
If certain features are in use (call barring, for example),  
youmayfirstneedtodeactivatethosefeaturesbeforeyou  
can make an emergency call. Consult this document and  
your local cellular service provider.  
Whenmakinganemergencycall,remembertogiveallthe  
necessary information as accurately as possible.  
Remember that your phone may be the only means of  
communication at the scene of an accident; do not cut off  
the call until given permission to do so.  
Restricting Children's access to your Phone  
Yourphoneisnotatoy.Childrenshouldnotbeallowedto  
play with it because they could hurt themselves and  
others,damagethephoneormakecallsthatincreaseyour  
phone bill.  
194  
FCC Notice and Cautions  
FCC Notice and Cautions  
FCC Notice  
The phone may cause TV or radio interference if used in  
close proximity to receiving equipment. The FCC can  
require you to stop using the phone if such interference  
cannot be eliminated.  
Vehicles using liquefied petroleum gas (such as propane  
orbutane)mustcomplywiththeNationalFireProtection  
Standard (NFPA-58). For a copy of this standard, contact  
the National Fire Protection Association, One  
Batterymarch Park, Quincy, MA 02269, Attn: Publication  
Sales Division.  
Cautions  
Any changes or modifications to your phone not  
expressly approved in this document could void your  
warranty for this equipment, and void your authority to  
operate this equipment. Only use approved batteries,  
antennas and chargers. The use of any unauthorized  
accessories may be dangerous and void the phone  
warranty if said accessories cause damage or a defect to  
the phone.  
Althoughyourphoneisquitesturdy, itisacomplexpiece  
ofequipmentandcanbebroken.Avoiddropping,hitting,  
bending or sitting on it.  
Other Important Safety Information  
Only qualified personnel should service the phone or install the  
phone in a vehicle. Faulty installation or service may be  
dangerous and may invalidate any warranty applicable to the  
device.  
Section 12: Health and Safety Information  
195  
   
Check regularly that all wireless phone equipment in your  
vehicle is mounted and operating properly.  
Do not store or carry flammable liquids, gases or explosive  
materials in the same compartment as the phone, its parts or  
accessories.  
For vehicles equipped with an air bag, remember that an air bag  
inflates with great force. Do not place objects, including both  
installed or portable wireless equipment in the area over the air  
bag or in the air bag deployment area. If wireless equipment is  
improperly installed and the air bag inflates, serious injury  
could result.  
Switch your phone off before boarding an aircraft. The use of  
wireless phone in aircraft is illegal and may be dangerous to  
the aircraft's operation.  
Failure to observe these instructions may lead to the  
suspension or denial of telephone services to the offender, or  
legal action, or both.  
Product Performance  
Getting the Most Out of Your Signal Reception  
The quality of each call you make or receive depends on  
the signal strength in your area. Your phone informs you  
of the current signal strength by displaying a number of  
bars next to the signal strength icon. The more bars  
displayed, the stronger the signal.  
Ifyou'reinsideabuilding, beingnearawindowmaygive  
you better reception.  
Understanding the Power Save Feature  
If your phone is unableto finda signal after 15 minutes of  
searching, a Power Save feature is automatically  
activated. If your phone is active, it periodically rechecks  
196  
 
Product Performance  
service availability or you can check it yourself by  
pressing any key.  
Anytime the Power Save feature is activated, a message  
displays on the screen. When a signal is found, your  
phone returns to standby mode.  
Understanding How Your Phone Operates  
Your phone is basically a radio transmitter and receiver.  
When it's turned on, it receives and transmits radio  
frequency (RF) signals. When you use your phone, the  
system handling your call controls the power level. This  
power can range from 0.006 watts to 0.2 watts in digital  
mode.  
Maintaining Your Phone's Peak Performance  
For the best care of your phone, only authorized  
personnel should service your phone and accessories.  
Faulty service may void the warranty.  
There are several simple guidelines to operating your  
phone properly and maintaining safe, satisfactory  
service.  
If your phone is equipped with an external antenna, hold the  
phone with the antenna raised, fully-extended and over your  
shoulder.  
Do not hold, bend or twist the phone's antenna, if applicable.  
Do not use the phone if the antenna is damaged.  
If your phone is equipped with an internal antenna, obstructing  
the internal antenna could inhibit call performance.  
Speak directly into the phone's receiver.  
Section 12: Health and Safety Information  
197  
Avoid exposing your phone and accessories to rain or liquid  
spills. If your phone does get wet, immediately turn the power  
off and remove the battery. If it is inoperable, call Customer  
Care for service.  
Availability of Various Features/Ring Tones  
Many services and features are network dependent and  
may require additional subscription and/or usage  
charges. Not all features are available for purchase or use  
inallareas.DownloadableRingTonesmaybeavailableat  
an additional cost. Other conditions andrestrictions may  
apply. See your service provider for additional  
information.  
Battery Standby and Talk Time  
Standby and talk times will vary depending on phone  
usage patterns and conditions. Battery power  
consumption depends on factors such as network  
configuration, signal strength, operating temperature,  
features selected, frequency of calls, and voice, data, and  
other application usage patterns.  
Battery Precautions  
Avoid dropping the cell phone. Dropping it, especially on a hard  
surface, can potentially cause damage to the phone and  
battery. If you suspect damage to the phone or battery, take it  
to a service center for inspection.  
Never use any charger or battery that is damaged in any way.  
Use the battery only for its intended purpose.  
If you use the phone near the network's base station, it uses  
less power; talk and standby time are greatly affected by the  
signal strength on the cellular network and the parameters set  
by the network operator.  
198  
     
Battery Precautions  
Follow battery usage, storage and charging guidelines found in  
the user’s guide.  
Battery charging time depends on the remaining battery  
charge and the type of battery and charger used. The battery  
can be charged and discharged hundreds of times, but it will  
gradually wear out. When the operation time (talk time and  
standby time) is noticeably shorter than normal, it is time to  
buy a new battery.  
If left unused, a fully charged battery will discharge itself over  
time.  
Use only Samsung-approved batteries and recharge your  
battery only with Samsung-approved chargers. When a charger  
is not in use, disconnect it from the power source. Do not leave  
the battery connected to a charger for more than a week, since  
overcharging may shorten its life.  
Do not use incompatible cell phone batteries and chargers.  
Some websites and second-hand dealers, not associated with  
reputable manufacturers and carriers, might be selling  
incompatible or even counterfeit batteries and chargers.  
Consumers should purchase manufacturer or carrier  
recommended products and accessories. If unsure about  
whether a replacement battery or charger is compatible,  
contact the manufacturer of the battery or charger.  
Extreme temperatures will affect the charging capacity of your  
battery: it may require cooling or warming first.  
Do not leave the battery in hot or cold places, such as in a car in  
summer or winter conditions, as you will reduce the capacity  
and lifetime of the battery. Always try to keep the battery at  
room temperature. A phone with a hot or cold battery may  
temporarily not work, even when the battery is fully charged.  
Li-ion batteries are particularly affected by temperatures below  
0 °C (32 °F).  
Do not place the phone in areas that may get very hot, such as  
on or near a cooking surface, cooking appliance, iron, or  
radiator.  
Section 12: Health and Safety Information  
199  
Do not get your phone or battery wet. Even though they will dry  
and appear to operate normally, the circuitry could slowly  
corrode and pose a safety hazard.  
Do not short-circuit the battery. Accidental short-circuiting can  
occur when a metallic object (coin, clip or pen) causes a direct  
connection between the + and - terminals of the battery (metal  
strips on the battery), for example when you carry a spare  
battery in a pocket or bag. Short-circuiting the terminals may  
damage the battery or the object causing the short-circuiting.  
Do not permit a battery out of the phone to come in contact with  
metal objects, such as coins, keys or jewelry.  
Do not crush, puncture or put a high degree of pressure on the  
battery as this can cause an internal short-circuit, resulting in  
overheating.  
Dispose of used batteries in accordance with local regulations.  
In some areas, the disposal of batteries in household or  
business trash may be prohibited. For safe disposal options for  
Li-Ion batteries, contact your nearest Samsung authorized  
service center. Always recycle. Do not dispose of batteries in a  
fire.  
Care and Maintenance  
Your phone is a product of superior design and  
craftsmanship and should be treated with care. The  
suggestions below will help you fulfill any warranty  
obligations and allow you to enjoy this product for many  
years.  
Keep the phone and all its parts and accessories out of the  
reach of small children.  
Keep the phone dry. Precipitation, humidity and liquids contain  
minerals that will corrode electronic circuits.  
Do not use the phone with a wet hand. Doing so may cause an  
electric shock to you or damage to the phone.  
200  
 
Care and Maintenance  
Do not use or store the phone in dusty, dirty areas, as its  
moving parts may be damaged.  
Do not store the phone in hot areas. High temperatures can  
shorten the life of electronic devices, damage batteries, and  
warp or melt certain plastics.  
Do not store the phone in cold areas. When the phone warms  
up to its normal operating temperature, moisture can form  
inside the phone, which may damage the phone's electronic  
circuit boards.  
Do not drop, knock or shake the phone. Rough handling can  
break internal circuit boards.  
Do not use harsh chemicals, cleaning solvents or strong  
detergents to clean the phone. Wipe it with a soft cloth slightly  
dampened in a mild soap-and-water solution.  
Do not paint the phone. Paint can clog the device's moving  
parts and prevent proper operation.  
Do not put the phone in or on heating devices, such as a  
microwave oven, a stove or a radiator. The phone may explode  
when overheated.  
If your phone is equipped with an external antenna, use only the  
supplied or an approved replacement antenna. Unauthorized  
antennas or modified accessories may damage the phone and  
violate regulations governing radio devices.  
If the phone, battery, charger or any accessory is not working  
properly, take it to your nearest qualified service facility. The  
personnel there will assist you, and if necessary, arrange for  
service.  
Section 12: Health and Safety Information  
201  
202  
Section 13: Warranty Information  
Topics Covered  
• Standard Limited Warranty  
Section 13: Warranty Information  
203  
   
Standard Limited Warranty  
What is Covered and For How Long? SAMSUNG  
TELECOMMUNICATIONS AMERICA, L.P.  
("SAMSUNG") warrants to the original purchaser  
("Purchaser") that SAMSUNG's Phones and accessories  
("Products") are free from defects in material and  
workmanship under normal use and service for the  
period commencing upon the date of purchase and  
continuingforthefollowingspecifiedperiodoftimeafter  
that date:  
Phone  
1 Year  
Batteries  
1 Year  
Leather Case/ Pouch  
Holster  
90 Days  
90 Days  
1 Year  
Other Phone Accessories  
WhatisNotCovered?ThisLimitedWarrantyisconditioned  
upon proper use of Product by Purchaser. This Limited  
Warranty does not cover: (a) defects or damage resulting  
from accident, misuse, abuse, neglect, unusual physical,  
electrical or electromechanical stress, or modification of  
any part of Product, including antenna, or cosmetic  
damage; (b) equipment that has the serial number  
removedormadeillegible;(c)anyplasticsurfacesorother  
externally exposed parts that are scratched or damaged  
duetonormaluse;(d)malfunctionsresultingfromtheuse  
of Product in conjunction with accessories, products, or  
204  
   
Standard Limited Warranty  
ancillary/peripheral equipment not furnished or  
approved by SAMSUNG; (e) defects or damage from  
impropertesting,operation,maintenance,installation,or  
adjustment; (f) installation, maintenance, and service of  
Product, or (g) Product used or purchased outside the  
United States or Canada. This Limited Warranty covers  
batteries only if battery capacity falls below 80% of rated  
capacity or the battery leaks, and this Limited Warranty  
does not cover any battery if (i) the battery has been  
chargedbyabatterychargernotspecifiedorapprovedby  
SAMSUNG for charging the battery, (ii) any of the seals  
onthebatteryarebrokenorshowevidenceoftampering,  
or (iii)thebattery has been used in equipmentotherthan  
the SAMSUNG phone for which it is specified.  
What are SAMSUNG's Obligations? During the applicable  
warranty period, SAMSUNG will repair or replace, at  
SAMSUNG's sole option, without charge to Purchaser,  
any defective component part of Product. To obtain  
service under this Limited Warranty, Purchaser must  
return Product to an authorized phone service facility in  
an adequate container for shipping, accompanied by  
Purchaser's sales receipt or comparable substitute proof  
ofsaleshowingthedateofpurchase, theserialnumber of  
Product and the sellers' name and address. To obtain  
assistance on where to deliver the Product, call Samsung  
Customer Care at 1-888-987-4357. Upon receipt,  
SAMSUNG will promptly repair or replace the defective  
Product. SAMSUNG may, at SAMSUNG's sole option,  
use rebuilt, reconditioned, or new parts or components  
when repairing any Product or replace Product with a  
rebuilt, reconditioned or new Product. Repaired/  
replaced leather cases, pouches and holsters will be  
Section 13: Warranty Information  
205  
warranted for a period of ninety (90) days. All other  
repaired/replacedProductwillbewarrantedforaperiod  
equal to the remainder of the original Limited Warranty  
ontheoriginalProductorfor90days,whicheverislonger.  
All replaced parts, components, boards and equipment  
shall become the property of SAMSUNG. If SAMSUNG  
determines that any Product is not covered by this  
Limited Warranty, Purchaser must pay all parts,  
shipping,andlaborchargesfortherepairorreturnofsuch  
Product.  
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?  
EXCEPTASSETFORTHINTHEEXPRESSWARRANTY  
CONTAINED HEREIN, PURCHASER TAKES THE  
PRODUCT "AS IS," AND SAMSUNG MAKES NO  
WARRANTY OR REPRESENTATION AND THERE  
ARE NO CONDITIONS, EXPRESS OR IMPLIED,  
STATUTORY OR OTHERWISE, OF ANY KIND  
WHATSOEVER WITH RESPECT TO THE PRODUCT,  
INCLUDING BUT NOT LIMITED TO:  
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR  
ANY PARTICULAR PURPOSE OR USE;  
WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE  
PRODUCT;  
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS  
CONTAINED THEREIN; OR  
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF  
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING  
THERETO.  
NOTHING CONTAINED IN THE INSTRUCTION  
MANUAL SHALL BE CONSTRUED TO CREATE AN  
206  
Standard Limited Warranty  
EXPRESS WARRANTY OF ANY KIND WHATSOEVER  
WITH RESPECT TO THE PRODUCT. ALL IMPLIED  
WARRANTIES AND CONDITIONS THAT MAY ARISE  
BY OPERATION OF LAW, INCLUDING IF  
APPLICABLE THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO  
THE SAME DURATION OF TIME AS THE EXPRESS  
WRITTEN WARRANTY STATED HEREIN. SOME  
STATES/PROVINCES DO NOT ALLOW  
LIMITATIONS ON HOW LONG AN IMPLIED  
WARRANTY LASTS, SO THE ABOVE LIMITATION  
MAYNOTAPPLYTOYOU.INADDITION,SAMSUNG  
SHALLNOTBELIABLEFORANYDAMAGESOFANY  
KIND RESULTING FROM THE PURCHASE, USE, OR  
MISUSE OF, OR INABILITY TO USE THE PRODUCT  
OR ARISING DIRECTLY OR INDIRECTLY FROM THE  
USE OR LOSS OF USE OF THE PRODUCT OR FROM  
THE BREACH OF THE EXPRESS WARRANTY,  
INCLUDING INCIDENTAL, SPECIAL,  
CONSEQUENTIALORSIMILARDAMAGES, ORLOSS  
OF ANTICIPATED PROFITS OR BENEFITS, OR FOR  
DAMAGES ARISING FROM ANY TORT (INCLUDING  
NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT  
COMMITTED BY SAMSUNG, ITS AGENTS OR  
EMPLOYEES, OR FOR ANY BREACH OF CONTRACT  
OR FOR ANY CLAIM BROUGHT AGAINST  
PURCHASER BY ANY OTHER PARTY. SOME STATES/  
PROVINCES DO NOT ALLOW THE EXCLUSION OR  
LIMITATIONOFINCIDENTALORCONSEQUENTIAL  
DAMAGES, SO THE ABOVE LIMITATION OR  
EXCLUSION MAY NOT APPLY TO YOU. THIS  
Section 13: Warranty Information  
207  
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,  
ANDYOUMAYALSOHAVEOTHERRIGHTS,WHICH  
VARY FROM STATE TO STATE/PROVINCE TO  
PROVINCE. THIS LIMITED WARRANTY SHALL NOT  
EXTENDTOANYONEOTHERTHANTHEORIGINAL  
PURCHASER OF THIS PRODUCT AND STATES  
PURCHASER'S EXCLUSIVE REMEDY. IF ANY  
PORTION OF THIS LIMITED WARRANTY IS HELD  
ILLEGALORUNENFORCEABLEBYREASONOFANY  
LAW, SUCH PARTIAL ILLEGALITY OR  
UNENFORCEABILITY SHALL NOT AFFECT THE  
ENFORCEABILITY FOR THE REMAINDER OF THIS  
LIMITED WARRANTY WHICH PURCHASER  
ACKNOWLEDGES IS AND WILL ALWAYS BE  
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS  
LIMITED AS THE LAW PERMITS. THE PARTIES  
UNDERSTAND THAT THE PURCHASER MAY USE  
THIRD-PARTY SOFTWARE OR EQUIPMENT IN  
CONJUNCTION WITH THE PRODUCT. SAMSUNG  
MAKES NO WARRANTIES OR REPRESENTATIONS  
AND THERE ARE NO CONDITIONS, EXPRESS OR  
IMPLIED, STATUTORY OR OTHERWISE, AS TO THE  
QUALITY, CAPABILITIES, OPERATIONS,  
PERFORMANCE OR SUITABILITY OF ANY  
THIRDPARTY SOFTWARE OR EQUIPMENT,  
WHETHER SUCH THIRD-PARTY SOFTWARE OR  
EQUIPMENT IS INCLUDED WITH THE PRODUCT  
DISTRIBUTED BY SAMSUNG OR OTHERWISE,  
INCLUDING THE ABILITY TO INTEGRATE ANY  
SUCH SOFTWARE OR EQUIPMENT WITH THE  
PRODUCT. THE QUALITY, CAPABILITIES,  
OPERATIONS, PERFORMANCE AND SUITABILITY  
208  
Standard Limited Warranty  
OF ANY SUCH THIRD-PARTY SOFTWARE OR  
EQUIPMENT LIE SOLELY WITH THE PURCHASER  
AND THE DIRECT VENDOR, OWNER OR SUPPLIER  
OF SUCH THIRD-PARTY SOFTWARE OR  
EQUIPMENT, AS THE CASE MAY BE.  
This Limited Warranty allocates risk of Product failure  
between Purchaser and SAMSUNG, and SAMSUNG's  
Product pricing reflects this allocation of risk and the  
limitations of liability contained in this Limited  
Warranty. The agents, employees, distributors, and  
dealers of SAMSUNG are not authorized to make  
modifications to this Limited Warranty, or make  
additional warranties binding on SAMSUNG.  
Accordingly, additional statements such as dealer  
advertising or presentation, whether oral or written, do  
not constitute warranties by SAMSUNG and should not  
be relied upon.  
Samsung Telecommunications America, L.P.  
1301 East Lookout Drive  
Richardson, Texas 75082  
Phone: 1-800-SAMSUNG  
Phone: 1-888-987-HELP (4357)  
©2006SamsungTelecommunicationsAmerica.Allrights  
reserved.  
No reproduction in whole or in part allowed without  
prior written approval. Specifications and availability  
subject to change without notice.  
Printed in Korea.  
Section 13: Warranty Information  
209  
210  
Call records 30  
Correcting the Number 26  
Ending a Call 27  
Making a Call 26  
Making a Call from Phone-  
book 28  
Index  
A
ABC mode 52, 54  
Accessing a Menu Function  
Redialing Last Number 27  
Silent mode 34  
Alarm 144  
Alert type 110  
B
Backlight  
description 21  
settings 107  
Call Records  
All calls 30  
Call time 33  
Delete all 32  
Incoming calls 32  
Missed calls 31  
Outgoing calls 32  
Battery  
charging 8  
installing 8  
low indicator 10  
Call Waiting 42, 114  
Caller group 67  
Caller ID 115  
Bluetooth  
About 116  
Camcorder 155  
Features 117  
Searching for new devices  
Security modes 117  
Settings 116  
Turning Bluetooth On and Off  
Visibility 116  
recording video 160  
Camera 136, 155  
taking photos 156  
Change password 119  
Charging battery 8  
D
Dialing display 108  
Bluetooth Help 118  
Broadcast Messages 97  
C
Display  
backlight 21  
icons 20  
DTMF 38  
E
Calendar 145  
Call Barring 113  
Entering Text 51  
Changing the Text Input  
Mode 52  
Call Functions 25  
Adjusting the Call Volume 28  
Answering a Call 29  
211  
 
Using ABC Mode 54  
Using Number Mode 57  
Using Symbol Mode 57  
Using T9 Mode 56  
Memory card 132  
Menu Navigation 43  
Menu Outline 45  
Message settings 96  
Message Tone 111  
Messages 75  
F
Fun & Apps 123  
Functions and Options 34  
G
Games 134  
Get More Help 22  
Getting Started 5  
Activating Your Phone 6  
Voice mail 11  
Messaging  
Types of Messages 76  
micro SD memory card 132  
Missed Call  
Viewing 31  
Multi-Party Call 39  
Dropping One Participant 40  
Private Conversation 39  
Setting up 39  
Music player 135  
Mute 37  
H
Health and Safety Informa-  
tion 175  
HiFi Ringers 109, 124  
My Album 127, 166  
My files 124  
I
Icons, description 20  
Instant Messaging 98  
International Call 26  
K
Keypad 110  
Keypad Tone 110  
My Journal 127, 167  
My Name Card 70  
My photos  
accessing pictures 162  
My videos 164  
N
Network Selection 114  
L
Lock application 120  
Low battery indicator 10  
M
Making a Call  
Phonebook 28  
Network Services  
Call Barring 113  
Call Forwarding 112  
Call Waiting 114  
Caller ID 115  
Network Selection 114  
MegaTones 109, 124  
Network Services Settings  
212  
R
Number mode 52  
Reset settings 122  
Ring Volume 110  
S
Security settings 118  
Sentbox 91  
O
On/off switch, phone 11  
Options  
During a Call 36  
Putting a Call on Hold 37  
Settings 101  
Organizer 144  
Alarm 144  
Bluetooth 116  
Display 106  
Network services 112  
Phone 103  
Reset 122  
Security 118  
Sound Settings 109  
Time & Date 102  
Voice recognition 142  
Calculator 151  
Calendar 145  
Stopwatch 153  
Tasks 150  
Timer 153  
Unit conversion 152  
World time 152  
Own Number 71  
Shortcuts 45  
Silent mode 111  
P
Phone  
SIM card  
icons 20  
switching on/off 11  
installing 6  
Soft Keys 34  
Phone lock 119  
Phone Settings 103  
Phonebook  
Software update 121  
Speakerphone 42  
Speed Dial  
Setting Up Entries 66  
Standard Limited Warranty  
Searching for a Number 40  
Phonebook Management 72  
Picture Messages 81  
PIN  
Stopwatch 153  
change 118  
check 118  
Storing a number  
Phone’s Memory 60  
SIM Card 61  
Push message  
viewing in Inbox 89  
Switching on/off  
phone 11  
213  
Symbol mode 52  
Voice recognition 136  
VoiceSignal  
T
checking phone status 141  
digit dial 137  
T9 mode 52  
Templates 93  
Text input mode  
changing 52  
features 137  
menu 136  
name dial 138  
Text Messages 78  
Timer 153  
Travel adapter 8  
t-zones 170  
Entering Text 171  
Exiting 170  
name lookup 139  
open applications 140  
send text message 139  
W
Warranty Information 203  
Navigating 171  
U
Understanding Your Phone 15  
Features of Your Phone 16  
View of Your Phone 16  
Understanding Your Phone-  
book 59  
Finding a Phonebook Entry  
Finding My Phone Number  
Management 72  
Update your phone software  
V
Videos 130  
Voice Mail 12, 95  
changing number 12  
Voice Messages 76  
Voice notes 76  
214  

Toastmaster TCM10DW User Manual
Timex T625B User Manual
StarTechcom IDE3510U2 User Manual
Siemens GIGASET S45 User Manual
Samsung Spinpiont F3 16MB User Manual
Samsung SCH A795 User Manual
Samsung Katalyst SGH T739 User Manual
Research In Motion Blackberry Cell Phone 1 User Manual
Polycom Cell Phone 8002 User Manual
Philips SAC2570 User Manual