SCH-a795 Series
P O R T A B L E
T r i / D u a l - M o d e
T E L E P H O N E
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
YC26.05_WBa795_072105_F4
Disclaimer of Warranties; Exclusion of Liability
Licensed by Qualcomm Incorporated under one or more of the
followingpatents:U.S.PatentNo.4,901,307;5,056,109;5,099,204;
5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.
Printed in South Korea
GH68-05891A
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH
THEPRODUCT, THEPURCHASERTAKESTHEPRODUCT"AS
IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP
OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TOTHEPRODUCT.INADDITION,SAMSUNGSHALLNOTBE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS.
Table of Contents
Table of Contents
5
6
Table of Contents
7
8
10
Section 1: Getting Started
Topics Covered
• Activating your Phone
• Turning Your Phone On and Off
• Setting Up Voicemail
• Understanding this User Manual
This section allows you to start using your phone by
activating your service, setting up your voice mail,
contacting customer support, or getting an
understanding of how this manual is put together.
Section 1: Getting Started
11
Activating Your Phone
If you purchased your phone at a Verizon Wireless Store,
it is probably activated and ready to use. If you have
upgraded your phone or received a new phone by mail,
it probably needs to be activated before you can use it.
To activate your phone, follow these steps:
1. Visit a Verizon Wireless Store and have your phone
activated, or visit www.verizonwireless.com and place
your cursor on the MY ACCOUNT tab available on the
home page.
2. When the drop-down menu displays, select ACTIVATE
PHONE to display instructions needed to activate your
phone online.
After gathering the required materials, select the Activate New
Phonelinkandfollowtheonlinedirectionstocompletetheactivation
process.
Note: If your phone is on and you press
for less than a second, the
phone will not power off. This prevents your phone from being turned off
accidentally.
Turning Your Phone On and Off
Turning Your Phone On
1. Fully extend the antenna to receive the best reception.
2. Open the flip, then press
.
12
Setting Up Your Voicemail
Note: As with any other radio-transmitting device, do not touch the
antenna as it affects call quality and may cause the phone to operate at a
higher power level than is necessary.
3. Your service provider’s name momentarily appears in the
display and the phone begins searching for a network
signal.
4. Once the phone finds a signal, the time, date, and day
appear in the display (in CDMA mode only).
5. You’re now ready to place and receive calls.
IfthephoneisoutsideoftheVerizonWirelesscoverageor
roamingarea,
appearsinthetopofthedisplay.Ifyou
are traveling outside the U.S., it may be necessary to
switch to GSM (Int’l) mode. See "Phone Modes" on page
37 for how to switch your phone mode from GSM to
CDMA and vice versa.
Turn your phone off
Press and hold
for two or more seconds. Your
phone powers off.
Setting Up Your Voicemail
Voice mail allows callers to leave voice messages, which
can be retrieved any time. The procedure for checking
voicemailvaries, dependinguponthemodeofoperation
(GSM or CDMA).
Note: Once your voice mail account has been set up, you can use the SMS
Inbox folder (under the Message menu) to view details of voice messages
in your voice mailbox.
Section 1: Getting Started
13
Voice mail setup (CDMA mode)
Note: It is recommended that voice mail be setup while you are in CDMA
mode.
1. In standby mode, press and hold
or enter
or dial your own mobile number to dial
voice mail.
2. Press
to interrupt the greeting.
3. Follow the prompts in the new user tutorial to setup your
mailbox.
Voice mail setup (GSM mode)
1. In standby mode, press and hold
, a “+” displays.
2. Press
again, then enter your own mobile number
to dial voice mail.
3. Press
to interrupt the greeting.
4. Follow the prompts in the new user tutorial to setup your
mailbox.
Listen to voice mail (CDMA mode)
1. In standby mode, press and hold
soft key, enter
, or dial your own mobile number
to dial voicemail. After connecting, you will hear your
voice greeting.
2. Interrupt your greeting by pressing
.
3. You are then prompted to enter your password.
14
Understanding this User Manual
Listen to voice mail (GSM mode)
1. In standby mode, press and hold the
dial + and your own mobile number to dial
voicemail. After Connecting a recorded message
prompts you to press if you have a mailbox on
soft key or
the system. You will then be prompted to enter your 10
digit mobile phone number.
2. Enter your 10 digit mobile phone number.
3. When you hear the voice greeting, press
, enter
your password, and follow the recorded prompts.
Understanding this User Manual
The chapters of this manual generally follow the same
order as the menus and sub menus in your phone. A
robust index for quick reference to most features begins
Also included is important safety information that you
should know before using your phone. Most of this
information is near the back of the guide, beginning on
page 193.
Notes and tips
Throughoutthisguideareiconsandtextthataresetapart
from the rest. These are intended to point out important
information, quick methods for activating features, to
defineterms,andmore.Thedefinitionsforthesemethods
are as follows:
• Notes: Explains alternative options within the current feature,
menu, or sub menu.
Section 1: Getting Started
15
• Tips: Provide quick or innovative methods for performing
functions related to the subject at hand.
• Fast Facts: Are like snippets from the glossary. Fast facts
provides definitions in context and proximity to the menu or
feature in question.
• Important: Points out important information about the current
feature that could affect performance, or even damage your
phone.
16
Section 2: Understanding Your Phone
Topics Covered
• Front View of Your Phone
• Open Veiw of Your Phone
• Features of Your Phone
• Understanding the Display Screen
• Installing Your SIMS Card
• Battery
This section outlines some key features of your phone. It
also displays the screen and the icons that will are
displayed when the phone is in use.
Section 2: Understanding Your Phone
17
Features of Your Phone
1. Headset Conncector: Used for hands free equipment.
2. External LCD: This screen displays caller information,
signal and battery strength, as well as other indidcators
of status.
3. Antenna: Extend for better reception.
4. Display Screen: This screen displays all the information
needed to operate your phone. The display icons indicate
network status, battery power, signal strength, etc.
5. OK Key: Pressing
when navigating through a menu
accepts the highlighted choice in the menu.
6. Left Soft Key: This key is used to navigate through
menus and application by selecting the choice available
in the Left Soft Key Option on your display screen.
7. Volume Key: Allows you to adjust the ringer volume in
standby mode (with the flip open) or adjust the voice
volume during a call. The volume key can alos be used to
scroll up and down to navigate through the differenct
menu options. To mute the ringer during an incoming
call, press the volume key up or down.
8. Voice Signal Key: Allows you to launch Voice Signal with
the press of button when the flip is open.
9. SEND Key: Allows you to place or receive a call. In
stanby mode, press the key once to access the Recent
call log.
10. Voicemail Key: Press and hold to automatically dial your
voicemail.
20
Features of Your Phone
11. Mobile Web: Press to launch Mobile Web.
12. Message Menu: Allows you to launch Messages menu
or Press and hold to automatically dial your voicemail.
13. Microphone: The Microphone allows the other caller to
hear you clearly.
14. Charger/PC Data Link Cable Jack: This connector is
used to plug in the charging accessories and also
connect any available accessory cable to your phone.
15. Alphanumeric Key Pad: Use these keys to enter
numbers, letters, and characters
16. END/Power Key: Ends a call. Press and hold this key for
a few seconds to turn your phone On or Off. When you
receive an incoming call, press to mute the ringer and
send the call to voicemail.
17. CLR Key: Deletes characters from the display when you
are in text entry mode. When in a menu, press to return
to the previous menu. This key also allows you to return
to the previous screen in a Mobile Web or Get It Now
session.
18. Voice Kit Key: Press to launch Voice Memo.
19. Right Soft Key: This key is used to navigate through
menus and applications by selecting the choice available
in the Right Soft Key Option on your display screen.
20. Get It Now: Press to launch Get It Now.
21. Service LED: The Service LED on the top of the phone
has the following functions:
• Lights red while charging. Green when charging is complete.
Section 2: Understanding Your Phone
21
• Flashes to indicate an incoming call or message.
• Lights momentarily when you power up the phone and flashes
red when the phone is in need of a charge.
22. Speaker: The speaker allows you to hear the other caller
and the different ring tones and sounds offered by your
phone.
Understanding the Display Screen
The top line of the display is reserved for icons that
indicate network status, battery power, signal strength,
and more. The following table lists some display icons
and their descriptions.
Display icons
Signal strength: Always appears when your phone is
on and indicates the current signal strength. More lines
indicate a stronger signal.
Auto Answer: Automatic answer is enabled. Your phone
automatically picks up any calls after the designated time.
GSM (Int’l) mode: Your phone is in GSM (Int’l) mode.
GSM (Int’l) mode is for operation while traveling in non-
CDMA countries.
22
Understanding the Display Screen
No service indicator: Your phone cannot find a signal
because you’re outside a service area. You cannot make
or receive calls. Wait for a signal or move to an open area
to find a signal. This indicator always appears when you
first turn on your phone and disappears once service is
located.
Roaming indicator: Your phone is outside your home
area. While roaming, another wireless provider may be
handling your call. The service rate for the call may be
higher than those made from within your home area.
Please refer to Verizon Wireless for roaming rates. The
roaming indicator will appear when the phone is used in
Internat’l (GSM) Mode outside of the Netherlands. The
appearance of the roaming indicator does not affect your
airtime rates when in GSM mode.
Note: The roaming indicator may not work in GSM networks.
In Use: Indicates a call in progress. When dialing a
number, this icon flashes until the call connects.
New Message: You’ve received a new text, page or
web alert message. You’re also notified of a new
message by animations and sound. You have one or
more unread voice mail messages in your voice mailbox.
(Only applicable on Verizon Wireless Network.)
1X Protocol: Indicates your phone is using the 1X
protocol. The 1X protocol is capable of high-speed data
(3G).
Note: 1X protocol is available only in the Verizon Wireless network.
Section 2: Understanding Your Phone
23
IS95-2G (Digital) Protocol: Your phone is using the
IS95-2G protocol. This protocol is incapable of high speed
data.
Vibrate mode: Your phone vibrates upon receiving a call.
Battery strength: More black bars indicate a greater
charge. When the battery is low, an empty battery icon
flashes and the phone sounds an alert, which indicates
your phone is about to shut down.
Alarm clock: The alarm clock is set.
Ringer On: Your phones call ringer is turned on.
Ringer off: Your phones call ringer is turned off.
DST Set: If you use the Dual Clock World Time wallpaper
for your display, you must set Daylight Savings Time
(DST) for your Home and Visiting areas.
GPS (United States only): Global Positioning Service
(GPS) for 911 is set to On for emergency calls only.
GPS (United States Only): Global Positioning Service
is set to On for location and 911 calls.
Silent mode: The ringer is silenced for all alerts,
incoming calls, and incoming messages. The phone by
alerts you to these by vibration and a flashing service LED
24
Understanding the Display Screen
Dialogue boxes
Dialogueboxespromptforaction,informyouofstatus,or
warn of situations such as low memory. Dialogue boxes
and their definitions are outlined below.
Choice
•Example: “Save message draft?”
Reconfirm
•Example: Delete all received messages?”
Performing
•Example: “Sending...” “Connecting...”
Completed
•Example: “Message sent successfully!”
Information
•Example: “New Message”
Error
•Example: “System Error!”
Warning
•Example: “Battery Low,” “Memory Full!”
Section 2: Understanding Your Phone
25
Intalling Your SIM Card
BeforeyoucanusetheGSMfeaturesinyourphone,you’ll
need to install a SIM card. SIM cards are provided by
Verizon Wireless.
1. With the battery removed
from the phone, insert the
SIM card face down into the
slot provided.
2. Slide the SIM card as far as
possible to the right,
beneath the SIM card
retaining brackets.
Sim retaining
brackets
3. Once the card is secured in
the SIM slot, install the
battery as outlined in the
following section, then turn the phone on.
Remove the SIM card
1. Press and hold
to turn off the
phone (if on).
2. Remove the battery.
3. Slide the SIM card to the left, then lift to
remove.
Important: Please handle the SIM card on its sides. Avoid touching the
circuits as this may cause damage to the SIM.
26
Battery
Important: Verizon Wireless has provided a unique SIM card to be used
with your SCH-A795. To use other SIM cards in your phone, please contact
Verizon Wireless for more information.
Battery
Note: This phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and desktop charger.
Important: Although the phone can be used while the battery is charging,
the battery must be fully charged before first use, otherwise you could
damage the battery.
1. Insert the bottom end of the
battery into the phone housing
with the label side down. The gold
contacts on the end of the battery
should match up with those on the
phone.
2. Push the top end of the battery down until it snaps into
place.
Remove the battery
1. Press and hold
to turn off the phone (if on).
2. Pull the battery release latch
toward the top of the phone. The
top of the battery should pop up.
3. Use your finger to lift the battery
(top end first) up and away from
the phone.
Section 2: Understanding Your Phone
27
Charge the battery
YourphoneispoweredbyarechargeablestandardLi-Ion
battery. Only use Samsung-approved charging devices
and batteries. Samsung accessories are designed to
maximize battery life. Using other accessories may
invalidate your warranty and may cause damage.
Use the desktop charger
The desktop charger operates from a 120/220 VAC wall
outlet. It also acts as a cradle to hold your phone in a
convenient, easy-to-use position while charging.
1. Plug the AC plug from the desktop charger into a
standard 120 VAC or 220 VAC wall outlet.
2. Slide your phone, bottom end first, into the desktop
charger. Your phone begins charging and the battery
image appears in the display.
Note: You can use your phone while charging, however, the battery
charges faster if the phone is turned off.
Battery indicator
Thebatteryindicator( )intheupper-rightcornerofthe
displayindicatesbatterypowerlevel.Threebarsindicate
a full charge, while an empty icon ( ) indicates an
almost empty battery. Two to three minutes before the
battery becomes too low to operate, a blinking empty
battery icon ( ) appears and a tone sounds. If you
continue to operate the phone without charging, it shuts
down.
28
Section 3: Call Functions
Topics Covered
• Making a Call
• Answering a Call
• Adjusting the Call Volume
• Call Log
• Phone Modes
• Roaming
• Voice Kit
• Voice Signal
This section allows you to make or answer a call. It also
includes the features and functionality associated with
making or answering a call.
Section 3: Call Functions
29
Making a Call
1. With the phone on, enter the number you wish to call
using the keypad. (If you make a mistake whil dialing,
press the CLR key to erase one digit at a time or press
and hold the CLR key to erase the entire number.)
2. Press
to place the call.
3. When your’re finished, close the flip or press end.
Dialing emergency numbers
Youcandialanyofthenumbers911,112,or999toplacean
emergency call.
Ifyourphoneisin VerizonCDMA modeandyoudial112
or 999, then press
, the prompt Make emergency
call? appears in the display.
• If you press the left soft key (
emergency number 911.
) Yes, your phone dials the
• If you press the right soft key (
) No, the call is
discontinued and your phone returns to standby mode.
Note: If you dial 911 while in Verizon (CDMA) mode, your phone dials the
emergency number immediately (no prompt).
If your phone is in Int’l GSM mode and you dial 911, then
press
,thepromptMakeemergencycall?appearsin
the display.
• If you press the left soft key (
emergency number 112 or 999.
) Yes, your phone dials the
• If you press the right soft key (
) No, the call is
discontinued and your phone returns to standby mode.
30
Making a Call
Note: If you dial 112 or 999 while in Int’l (GSM) mode, your phone dials the
emergency number immediately (no prompt).
Placing a GSM International Calls
Call the U.S. from another country
1. In standby mode, press and hold
to display the
“+” symbol. The “+” symbol automatically inserts the
exit code for the country from which you are calling.
2. Press
the area code and number.
3. Press . The number is dialed.
to insert the U.S. country code, then enter
Call the U.S. from another country using the
Phonebook (GSM Only)
1. In standby mode, press and hold
to display the
“+” symbol. The “+” symbol automatically inserts the
exit code for the country from which you are calling.
2. Briefly press
to insert the long-distance prefix.
3. Press the left soft key (
) Find to retrieve an entry
from your Phonebook.
Calling Internationally from another country (GSM Only)
1. In standby mode, press and hold
to display the
“+” symbol. The “+” symbol automatically inserts the
exit code for the country from which you are calling.
2. Enter the country code of the person you are calling.
Section 3: Call Functions
31
3. Enter the area code, without the leading zero, followed
by the number of the person you are calling. Please note
there are some exceptions for leaving out the leading
zero such as Italy, Finland and Spain.
Placing a CDMA International calls
Call another country from the U.S. (CDMA Only)
Note: Your phone must be in Verizon (CDMA) mode to place calls from
within the United States.
1. In standby mode, enter the three-digit exit code (011) for
the United States.
2. Enter the country code for the country that you are
calling. A complete list of country codes can be found at
www.verizonwireless.com.
3. Enter the number that you wish to call, then press
.
Note: Puerto Rico and Canada are on the North American dialing plan.
When making calls to Puerto Rico and Canada it is similar to making calls
within the United States, no unique country codes are necessary.
Placing calls outside the U.S. (CDMA Only)
Mexico
• Calling locally within Mexico: Dial the seven or eight-digit
number.
• Calling long distance within Mexico: Dial 01, plus the ten-digit
number (includes area code).
• Calling to the U.S. or Canada from Mexico: Dial 001, plus the
ten-digit number (includes area code).
32
Answering a Call
• Calling voicemail from Mexico: Dial 001, plus your ten-digit
wireless number. Once you hear the recorded prompt, press
and enter your passcode.
Note: For more information on International Dialing see
VerizonWireless.com.
Answering a Call
When you receive a call, the phone displays one of the
following:
• If the caller can be identified, the caller’s number (or name if it’s
in your Phonebook) appears in the display.
• If the caller can’t be identified, Call from unavailable #, Call
from restricted #, or no number appears in the display.
Your phonecontinues to notify you of thecall until one of
the following events occur:
• You answer the call.
• The calling party ends the call.
• The call is sent to voicemail.
• Press
to answer the call.
Receive calls while using a feature (CDMA Only)
If you receive a call while browsing menus and sub
menus, or while using a feature, the caller’s number (or
name,ifit’sinyourPhonebook)appearsinthedisplayas
well as the options Silent and Ignore.
• Press the left soft key (
) Silent to silence the ringer. If the
call goes unanswered, it will eventually be sent to voicemail.
Section 3: Call Functions
33
• Press the right soft key (
to voicemail.
) Ignore to send the call directly
• Press
to answer the call.
Receive calls while using Get It Now or VZW with MSN
(Verizon Wireless Network only)
If you receive a call while using a BREW application or
VZWwithMSN,theapplicationisputonholdduringthe
call. Once the call ends, your session resumes.
Adjusting the Call Volume
In standby mode, repeatedly press the volume key ( )
down until the Call Volume Level desired appears in the
display. The volume key is on the left side of phone, next
to the SEND key (
)
Call Log
Use Call Log to view received, dialed, and missed calls
foryourphone.YoucanalsouseRecentCallstoeraseyour
call history and view Call Timers.
Note: Functionality of Recent Calls is dependent upon availability with the
service provider’s network and whether or not Caller ID is enabled.
View Recent Calls
1. In standby mode, press the left soft key (
then press (Recent Calls).
) Menu,
2. Press the corresponding number on the keypad to view
call logs for the following call types:
•
•
for Received
for Dialed
34
Call Log
•
for Missed.
Recent Calls menu options
While viewing recent calls, you have options such as
saving recent call numbers to your Phonebook, sending
messages to recent call numbers, and prepending
(editing) numbers before saving.
1. In standby mode, press the left soft key (
then press (Recent Calls).
) Menu,
2. Press the corresponding number on the keypad to view
call logs for the following call types:
•
•
•
for Received,
for Dialed
for Missed
3. With the desired call log appearing in the display, press
the left soft key ( ) Option. A pop-up menu appears
in the display with the following options .
• Save Number: Save the number as a new entry or save to
an existing entry in your Phonebook.
• Delete: Delete the number from your Recent Calls list.
• Mark & Delete: Mark and delete only selected calls.
• Send Message: Send a text message or Pix Msg to the
number.
4. Use the navigation keys to highlight an option.
5. Press
to perform the highlighted function.
6. Follow the prompts as necessary to complete the
function.
Section 3: Call Functions
35
Tip: To quickly view recently dialed and received calls, press
your phone in standby mode.
with
Delete Call Logs
Use Delete Call Logs to delete calls from any or all call
logs.
1. In standby mode, press the left soft key (
) Menu,
then press
(Recent Calls),
(Delete Call
Logs).
2. Use the navigation key to highlight the call log type that
you wish to delete, then press
confirm the erasure.
. You’re prompted to
3. Press the left soft key (
) Yes to erase the selected
call log, or press the right soft key (
) No to return to
the Delete Call Logs sub menu.
Call Timers
Use the Call Timers sub menu to view various timers for
calls made and received from your phone. You can also
reset any of your call timers, with the exception of the
Lifetime timer.
Note: The Lifetime timer retains a log of all calls made since the purchase
of your phone and cannot be reset.
1. In standby mode, press the left soft key (
then press (Recent Calls),
) Menu,
(Call Timers).
The sub menus listed appear in the display. Last
• Last Call Timer: View the duration of your last call.
• Total Received: View the duration of total incoming calls.
36
Phone Modes
• Total Dialed: View duration of calls dialed from your phone.
• Lifetime: View the duration of all calls on your phone since
activation (Life Time timers cannot be erased).
• Reset Timer: reset the Last Call Timer, Total Received, or
Total Dialed timers.
2. Use the navigation key to highlight the desired sub
menu.
3. Press
to perform the function for the highlighted
option or to enter its sub menu and make changes as
desired.
Phone Modes
Your phone is capable of operating in a number of
countries on both CDMA (Code Division Multiple
Access) and GSM (Global Systems for Mobile) networks.
While in the United States or on other CDMA roaming
networks,useyourphoneinVerizon(CDMA)mode. Use
your phone in Int’l (GSM) mode while in countries
servicedbyGSMnetwork.Foracompletelistofcountries,
please visit www.verizonwireless.com.
Note: When your phone is in Verizon (CDMA) mode, it does not necessarily
mean that you are on the Verizon Wireless Network. You may roam on
certain other carriers’ CDMA networks domestically and internationally
when your phone is in Verizon (CDMA) mode. For more information, see
www.verizonwireless.com.
1. In standby mode, press the left soft key (
) Menu,
then press (Settings), (Phone Mode).
The following options appear in the display.
Verizon (CDMA) Int’l (GSM)
Section 3: Call Functions
37
2. Use the navigation keys to highlight the desired mode of
operation, then press . A dialogue box appears in the
display asking if you wish to change modes.
3. Press the left soft key (
press the right soft key (
Mode options list.
) Yes to change modes, or
) No to return to the Phone
4. If you pressed Yes, the phone restarts and powers up in
the selected mode of operation.
Text entry mode
Enter content using any of the four text entry modes.
1. At any text entry screen, press left soft key (
)
Option. A pop-up menu appears in the display with ABC
highlighted.
2. Use the left/right navigation keys to display the optional
text entry modes of 123, T9 Word, and Symbol.
3. Once the desired method of text entry appears, press
to use that mode of text entry in your message.
Standby mode
Standbyis thestate ofthephone once it has found service
and is idle. The phone goes into standby:
• After you power it on.
• When you press
after a call.
• Anytime you press
menus and sub menus.
while browsing your phone’s
1. While in standby mode, enter a phone number, then
press
to place a call.
2. Press
to return to standby mode.
38
Phone Modes
Silent mode
Silencethetonesyourkeypadmakeswheneveryoupress
a key using the Silent Mode feature.
Enter Silent mode
In standby mode, press and hold
. Entering Silent
Mode briefly appears in the display and your phone
returns to standby mode.
Exit silent mode
• In standby mode, press and hold
. Exiting Silent Mode
briefly appears in the display and your phone returns to standby
mode.
Vibrate mode
In standby mode, repeatedly press the volume key ( )
down until Vibrate appears in the display. The volume
key is on the left side of phone, next to the SEND key
(
).
Note: The vibrate icon ( ) appears in the display whenever the phone is
in Vibrate or Vibrate+Ring mode.
Airplane Mode
With Airplane Mode on, all RF functions for your phone
are disabled, and you cannot use your phone to place
calls.
1. In standby mode, press the left soft key (
) Menu,
then press (Settings), (Call Options),
(Airplane Mode). A message briefly appears in
the display informing you that all incoming and outgoing
calls will be disabled after you make the selection.
Section 3: Call Functions
39
2. Use the navigation key to highlight On or Off, then press
. If you select On, a message appears in the display
alerting you that all call functions will be disabled.
3. Press the left soft key (
key ( ) No to exit and return to the Airplane Mode
selection sub menu.
) Yes, or press the right soft
TTY Mode
Your phone is fully TTY/TDD compatible. TTY/TDD
equipment is connected to your phone through the
headset connector on the top of the phone. TTY/TDD
must be enabled before you can use your phone with a
TTY/TDD device.
1. In standby mode, press the left soft key (
then press (Settings), (Call Options),
(TTY Mode). You’re prompted to enter the TTY
password.
2. Enter the TTY password. The default TTY Password is
(or #TTY). Enable and
) Menu,
,
,
,
Disable appear in the display.
3. Use the navigation key to highlight your selection and
press . You’re returned to the Call Options sub menu
and the TTY icon ( ) appears in the top of the display.
40
Roaming
Roaming
What is Roaming
Yourphonecanroamonotherdigitalnetworks.Roaming
occurs when you travel outside a pre-designated
coverage area. The roaming icon appears on when in
roaming is active, and extra charges may apply when
making or receiving a call.
Note: Some features may be unavailable while roaming.
Roaming also consumes additional power from the
battery requiring more frequent charges.
Roaming Options
RoamOptionsetsroamingpreferencesifyoumoveinand
out of your home network.
The following roaming options are available:
Homeonly-Yourphoneisavailablefornormaloperation
only in the designated coverage area.
Automatic-A - The preferred roaming list is used to
acquire service. If no preferred systems are found, any
digital "A" system is acquired.
Automatic-B - The preferred roaming list is used to
acquire service. If no preferred systems are found, any
digital "B" system is acquired.
Note: Contact your service provider for information regarding preferred
systems.
To change your Roaming option, follow these steps:
1. In standby mode, press the left soft key (
) Menu,
Section 3: Call Functions
41
then press
(Roam Option).
2. Use the navigation key to highlight your roam option
preference, then press . Your settings are saved.
(Settings),
(Call options),
Note: This feature is only available on the Verizon Wireless network.
Voice Kit
Voice recognition capabilities of the SCH-a795 are
exceptional due to advanced, speaker-independent
technology.Thismeansthereisnolongeraneedto“train”
yourphonetounderstandyourvoice. Youcanfinallyuse
your voice in a natural manner to dial numbers, lookup
contacts, view your schedule, and much more. Please
review the following content to learn more about this
useful feature.
The Voice Kit menu
UsetheVoiceKitmenutoconfigurethevoicerecognition
settings for your phone.
1. In standby mode, press the left soft key (
) Menu,
then press (Voice Kit). The following Voice Kit
sub menus appear in the display
• Voice Memo: Record, review, and delete Voice Memos.
• Voice Setting: Setup and configure Voice Kit voice
recognition settings.
• Voice Kit Active: Select the method for Voice Kit activation.
2. Use the navigation key to highlight the desired Voice Kit
sub menu.
42
Voice Kit
3. Press
to enter the highlighted sub menu. The
following three sections describe each Voice Kit sub
menu in greater detail.
Voice Memo
Voice Memo allows you to record voice memos for later
playback. You can also record the caller on the other end
of the line during a phone conversation.
1. In standby mode, press the left soft key (
) Menu,
(Voice Memo),
2. Press
(Voice Kit),
(Record). The phone prompts, “Please record after the
beep.”
3. Wait for the beep, then start speaking. During recording,
your phone displays a countdown timer.
To pause memo, press the left soft key (
When a memo is paused, press the left soft key (
Resume, to resume recording.
) Pause
)
4. Press the right soft key (
) Finish once you’re
finished recording.
5. Once you’ve stopped recording, press the left soft key
) Option.
(
A popup menu displays with the following options
• Save As: Save the voice memo you just recorded
• Review: Review (replay) the voice memo you just recorded,
as well as view details such as the time and date it was
recorded.
• Rerecord: Rerecord over the voice memo you just recorded.
6. Use the navigation key to highlight the option you want
Section 3: Call Functions
43
7. Press
to perform the option.
Review and delete voice memos
If you’ve saved any memos, you can review them
anytime.
1. In standby mode, press the left soft key (
then press (Voice Kit), (Voice Memo),
(Review). A list of saved memos appears in the
display.
2. Use the navigation key to highlight the memo you wish to
review, then press . The memo title, length, size, and
time/date the recording took place appear in the display.
) Menu,
3. Press the left soft key ( ) Option to Play, Rename,
Delete or Delete All the memo.
Erase all voice memos at one time
1. In standby mode, press the left soft key (
) Menu.
2. Press
(Voice Kit),
(Delete All). Delete all? appears in the display.
3. Press the left soft key ( ) Yes to delete all voice
(Voice Memo),
memos, or press the right soft key (
to the previous menu.
) No to return
4. If you pressed the left soft key (
) Yes to Delete All,
a confirmation message appears in the display and
you’re returned to the Voice Memo sub menu.
44
Voice Kit
Voice Setting
Use the Voice Setting sub menus to select the method for
Voice Kit activation, or to adapt and reset voice
recognition for digits to your voice.
1. In standby mode, press the left soft key (
) Menu.
2. Press (Voice Kit), (Voice Setting). The
sub menus listed in the following table appear in the
display.
• Choice Lists: When voice signal doesn’t recognize a name
or number correctly, you are provided a list of alternative
choices. The option allows you to control how choice lists are
used for al the dialing features.
• Digit Dialing: Allows you to select your current location to
improvethe accuracy of digit dialing, or allows you to adapt digit
dialing to your voice.
• Sensitivity: Allows you to control how voice signal
determines when a spoken word is a match.
• Sound: Allows you to turn audio prompts, audio digit
playback, and name playback on or off, and allows you to
adjust the speed and volume of name playback.
• About: Provides the version and build information for the
voice signal kit installed on your phone.
3. Use the navigation key to highlight a sub menu, then
press
to enter the sub menu and configure
settings.
Section 3: Call Functions
45
Voice Kit Active
This menu option allows you to set the key or action that
launches voice kit. To change the current setting, follow
these steps.
1. In standby mode, press the left soft key (
) Menu.
2. Press . The Voice Kit Active menu
,
displays, and the following options are available.
• Voice Key Only
• Voice Key /Folder
• Voice Key /EarMic
3. Use the navigation key to highlight the option you want,
then press
to save and exit.
Note: Your phone is initially set to Voice Key Only, so that when you press
the key, the voice signal commands are activated. If you select
one of the other options, such as Folder or EarMic, your phone will launch
the voice kit commands when you open the flip or when you attach the
optional headphone set to your phone, as well as when you press the
key.
Voice Signal
Voice Signal commands give you the power to launch
applications using your voice. Simply say a command at
the prompt to record memos, open the Phone Book, open
the browser, and more.
1. In standby mode, press
.
After a brief pause, “Say a Command” appears in the
display and is pronounced through the speaker.
46
Voice Signal
2. After the phone beeps, say the name of the command
that you wish to perform. The Voice Signal commands
listed in the following table are available
• Call: Lets you dial a phone number by saying a name saved in
your contact list or by saying the digits in the telephone
number.
• Send Text: This command provides access to your
messaging feature, allowing you to send text and multimedia
messages.
• Lookup: Lets you retrieve contact information for any entry in
your contacts list.
• Go To: This provides you with one-step access to many of
your phone’s applications such as Calendar.
• Check: With a single command you can check your phone’s
battery level, signal strength, or network coverage.
Moreinformationonthecommandslistedintheprevious
table is available in the following sections.
Call a name or number
The Call command lets you dial a person by saying the
nameyou’ve stored for that person in your contact list or
bysayingthetelephonenumber’sdigits,evenifyouhave
not saved the number in contacts.
Voice dialing tips
• Voice dialing works best in quieter environments.
• When pronouncing a name or number, speak at a normal
speed, and there is no need to pause between digits.
• The phone recognizes the digits one, two, three, four, five, six,
seven, eight, nine, zero, and oh (zero). It doesn’t recognize
numbers such as “one eight hundred” for “1-800.” Instead,
say “one eight zero zero,” or “one eight oh oh.”
Section 3: Call Functions
47
• The phone recognizes only valid seven or ten-digit North
American phone numbers, optionally preceded by the digit “1.”
• If you are experiencing frequent problems with Voice Dial
recognizing your commands, try adapting it to your voice,
which greatly improves its accuracy. See "Digit Dial
Dialing a name
1. In standby mode, press
.
“Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Call.”
The phone prompts, “Say the name or number.”
3. Say the full name of the person you want to call, exactly
as it is entered in your Phonebook.
4. The phone may display one or more names on the
screen and prompts “Did you say?”
To confirm the name you spoke, wait for the beep and
then say “Yes” or choose the correct name from the
choice list using your navigation key.
48
Voice Signal
Note: If the name that you pronounced has more than one associated
number, the phone displays the different locations (such as “home” or
“work”) and prompts you, “Which number?” In this case, pronounce the
location that you want to call. The phone dials the number.
5. The phone repeats what you said and then prompts,
“Connecting” and dials the number.
Digit Dial
Digit Dial lets you dial any valid seven-digit or ten-digit
phone number by speaking the number naturally,
without pausing between digits.
Digit Dial Tips
• Digit Dial works best in quieter environments.
• When pronouncing a number, speak at a normal speed, saying
each digit clearly. There is no need to pause between digits.
• The phone recognizes the digits one, two, three, four, five, six,
seven, eight, nine, zero, and oh (zero). It doesn’t recognize
numbers such as “one eight hundred” for “1-800.” Instead,
say “one eight zero zero,” or “one eight oh oh.”
• The phone recognizes only valid seven or ten-digit North
American phone numbers, optionally preceded by the digit “1.”
• If you are experiencing frequent problems with Digit Dial
recognizing you, try adapting it to your voice, which can greatly
improve accuracy. See "Digit Dial Adaptation" on page 50 for
more information.
Section 3: Call Functions
49
Use Digit Dial
1. In standby mode, press
.
“Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Call.”
The phone prompts, “Say the name or number.”
3. Pronounce the number naturally and clearly.
The phone may display one or more numbers on the
screen and prompt you for confirmation.
If the phone asks “Did you say” followed by the correct
number, say “Yes.” The phone dials the number.
If the phone asks “Did you say” followed by any
incorrect numbers, say “No.” If there are other choices,
the phone prompts you with them next.
4. The phone dials the number.
Digit Dial Adaptation
Digit Dial works well for most people without special
adaptation. However, people with strong accents or
unique voice characteristics may receive better results
after adapting the system to match their voices.
Note: You should adapt Digit Dial only if the system is frequently unable to
recognize your speech. After you adapt Digit Dial, your phone is customized
to your voice, and your voice only. Others will not be able to use it unless
they reset the phone to factory defaults.
Adaptationinvolvesrecordingseveraldigitsequencesto
adapt the system to the unique properties of your voice.
The adaptation process takes about three minutes.
50
Voice Signal
Tips for adapting Digit Dial
• Adapt digits in a quiet place.
• Make sure you wait for the beep before starting to speak.
• Speak clearly, and say each digit distinctly.
• If you make a mistake while recording a sequence of digits, or if
there is an unexpected noise that spoils the recording, re-
record that sequence.
Adapt Digit Dial to your Voice
1. In standby mode, press the left soft key (
) Menu,
(Voice Setting),
(Adapt Digits) A short
2. Press
(Voice Kit),
(Digit Dialing),
description of the Adapt Digits process displays.
3. Read the description until you are comfortable to
proceed, then press
.
Your phone displays the first digit sequence and “Please
say” plays through the speaker followed by the four
digits appearing in the display.
4. Wait for the beep and repeat the digits using your normal
tone of voice.
5. After a moment, the phone plays back the recording and
prompts “Did the recording sound ok?” If the recording
was good, say “Yes.” If you need to re-record, say “No.”
• If you say “No,” the phone prompts you to pronounce the digits
again. Wait for the beep and then re-record. Repeat this step
until you’re satisfied with the recording.
Section 3: Call Functions
51
6. After confirming that the recording sounds ok, repeat the
recording process with the next set of digits. After six
sets of digits, the phone asks whether you want to do
more adaptation. Answer “Yes.”
7. Repeat steps 4-6 for another six sets of digits. After the
sixth set of digits, the phone indicates that adaptation is
complete.
Reset Digit Dial Adaptation
This option erases an adaptation and resets Digit Dial to
its original state.
1. In standby mode, press the left soft key (
then press (Voice Kit), (Voice Setting),
(Digit Dialing), (Reset Digits). A
) Menu,
confirmation message appears in the display asking if
you are ready to reset digit adaptation.
2. Press the (
key (
) OK to proceed, or press the right soft
) Back to return to the Voice Setting sub menu.
3. If you pressed the left soft key (
) OK, a confirmation
message appears in the display that Digit Dial adaptation
has been reset.
Looking up contacts
UsetheLookupcommandtolookupcontactinformation
for any person stored in your Contacts list.
1. In standby mode, press
. The phone prompts,
“Say a command.”
2. Say “Lookup” followed by the name of a person in your
Contacts list.
52
Voice Signal
After you say a name, you may be prompted, "Did you
say?" followed by the first of up to three names. To
confirm a name, wait for the beep and then say “Yes.”
If there is no match found, the phone responds with
“Sorry, no match found.”
Sending messages
The Send command allows you to send a text message.
Send a Text Message
1. In standby mode, press
.
“Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Send Text.” Your phone prompts, “Say the name
or number.” Say a name from your Contacts list or say a
valid telephone number.
3. Your phone prompts you to confirm the name or number,
say “Yes” to display the Send To menu with the number
entered.
4. Press
to confirm the entry, then compose and send
your text message. For more information on sending a
text message.
Section 3: Call Functions
53
Opening applications
TheGoTocommandallowsyoutoopenanapplicationor
to quickly access several menus on your phone.
1. In standby mode, press
. “Say a Command”
appears in the display and is pronounced through the
speaker.
2. Say “Go To” followed by the application or menu item
you want.
For example, say, “Go To Voice Mail.” Your Voice Mail is
activated.
Note: To see a list of applications or menu items, say “Go To” but do not
specify a destination. Your phone displays available options and prompts
“Please Choose.” Say “Next Menu” to scroll through other available
choices applications and menu choices.
Checking phone status
The Check command allows you to view and hear status
information about your phone, including your phone
number, the current battery or signal strength, and
network coverage.
1. In standby mode, press
. “Say a Command”
appears in the display and is pronounced through the
speaker.
2. Say “Check” either by itself or followed by one of the
following:
• Check: Lets you see a list of options that you can check
• Status: Displays the battery, signal, and network coverage all
together
54
Voice Signal
• Signal: Lets you check the current signal strength received by
your phone.
• Network: Lets you check the current network coverage for
your phone.
• Battery: Lets you view your phone’s current battery level.
• My Phone #: Displays your phone’s telephone number.
Your phone displays the information requested above
and plays it through your speaker.
Section 3: Call Functions
55
56
Menu Navigation
Access menus using the navigation key in tandem with
the two soft keys (
1. In standby mode press the left soft key (
The first of several menus appear in the display.
), or use a shortcut.
) Menu.
Note: When you press the left soft key (
) Menu, more than one menu
may appear in the display. This setting can be modified in the Settings >
Display > Style sub menu.
2. Use the navigation keys to browse phone menus.
3. Press
to enter the menu or sub menu presently
appearing in the display.
Return to the previous menu
1. Press the right soft key (
) Back to return to the
previous menu.
2. If Back does not appear in the display, press
to
return to the previous menu.
Navigate using shortcuts
You can also access menus and sub menus using menu
numbers. This method is often called a “shortcut.” To
shortcut to a menu or sub menu, press the left soft key
(
) Menu, then enter the menu and/or sub menu
number(s) for the feature in question. Use "Navigation
Key shortcuts" on page 59, for looking up the menu
shortcut number.
1. In standby mode, press the left soft key (
) Menu.
2. Press the number the menu, sub menu, and so on to
arrive at the desired feature.
58
Menu Navigation
Example: Press the left soft key (
press (Planner),
) for Menu, then
(To Do List).
Navigation Key shortcuts
In standby mode, press a navigation key (as illustrated
below) to launch its corresponding application.
The In-Use Options
Accessnumerousmenusandfeaturesevenwhileinacall.
Note: If the call is disconnected while accessing the In-Use Option, the In-
Use Option disappears from the display and the phone eventually returns to
standby mode.
Section 4: Menu Navigation
59
1. While in a call, press the left soft key (
) Option. The
following menu items appear in the display.
• Contacts: Open the Phonebook and view contacts.
• Recent Calls: Display your recent incoming and outgoing
calls.
• Message: Open the Messages menu.
• Key Tone On/Off: Turn keypad tones on or off.
• My Phone #: View the phone number asigned to yor phone
by Verizon Wireless.
• Phone Info: View the software and hardware version
information for your phone.
• Voice Privacy: Prevent recipients of your calls from seeing
your number on their display.
• Location: Turn the GPS setting to Location on or 911 only.
• Voice Memo: Record a voice memo.
2. Use the navigation key to highlight a menu. Press
to
open the highlighted menu or to activate the feature.
Menu Outline
Usethemenushortcutsonthefollowingpagestoquickly
accessmenusandsubmenus.Presstheleft softkey(
)
Menu, then press the number to the right of the menu to
jump to that menu, sub menu, or feature. For example, to
jump to the Outbox sub menu, press the left soft key
(
) Menu, then press
(Messages),
(Outbox).
60
Menu Outline
Phonebook1
Find1-1
New1-2
Group1-3
My Name Card1-4
Send V-Card1-5
My Name Card1-5-1
Phonebook1-5-2
My Phone #1-6
Memory Info1-7
Delete All1-8
Recent Calls 2
Received2-1
Dialed2-2
Missed2-3
Delete Call Logs2-4
Received 2-4-1
Dialed
Missed
2-4-2
2-4-3
All Calls 2-4-4
Call Timers2-5
Last Call Timer2-5-1
Total Received2-5-2
Section 4: Menu Navigation
61
Total Dialed2-5-3
Lifetime 2-5-4
Reset Timer2-5-5
Messages 3
New Text Msg3-1
New Pix Msg3-2
Voice Mail3-3
Inbox3-4
Outbox3-5
Saved/Draft3-6
Web Alert3-7
Msg Setting3-8
Text Msg Setting3-8-1
Quick Text 3-8-1-1
Save In Outbox 3-8-1-2
Insert Signature 3-8-1-3
Auto Play 3-8-1-4
Direct View3-8-1-5
Pix Msg Setting3-8-2
Quick Text 3-8-2-1
Save In Outbox3-8-2-2
Delivery Ack3-8-2-3
Retrieval Mode3-8-2-4
62
Menu Outline
Entry Mode3-8-3
Callback #3-8-4
Auto Delete3-8-5
Voice Mail #3-8-6
GSM Setting (GSM only)3-8-7
Setting1 3-8-7-1
Setting2 3-8-7-2
Reply Path3-8-7-3
Delivery Reports3-8-7-4
Sending Setting3-8-7-5
Voice Mail #3-8-7-6
Bearer Selection 3-8-7-7
Memory info3-9
Delete All3-0
Old Inbox 3-0-1
New Inbox3-0-2
Outbox
Draft
3-0-3
3-0-4
Voicemail 3-0-5
Web Alert 3-0-6
SIM
3-0-7
All Msgs 3-0-8
Section 4: Menu Navigation
63
Get It Now (CDMA Only)4
Launch Now4-1
Mobile web (CDMA Only)5
Launch Web5-1
Multimedia 6
Image Gallery6-1
Sounds6-2
Pix Template6-3
Animedody Gallery6-4
Memory Info6-5
Delete All6-6
Image Gallery6-6-1
Sounds
6-6-2
Animelody Gallery 6-6-3
All Galleries6-6-4
Settings 7
Phone Mode7-1
Profile7-2
Display7-3
Language7-3-1
Style 7-3-2
Animation 7-3-3
Banner 7-3-4
64
Menu Outline
Backlight 7-3-5
Service LED7-3-6
Auto Hyphen7-3-7
Security7-4
Lock Phone7-4-1
Change Lock7-4-2
Emergency #7-4-3
Voice Privacy7-4-4
Restriction 7-4-5
Outgoing Call7-4-5-1
Incoming Call7-4-5-2
Phonebook7-4-5-3
Delete Memory7-4-6
Reset Phone7-4-7
Pin Menu 7-4-8
PIN Check7-4-8-1
Change PIN7-4-8-2
Call Options7-5
Answer Options7-5-1
Auto Retry7-5-2
Data 7-5-3
Airplane Mode 7-5-4
Roam Option 7-5-5
Section 4: Menu Navigation
65
TTY Mode 7-5-6
Shortcut List7-6
Location (CDMA Only)7-7
GSM Services (GSM Only)7-8
Call Diverting7-8-1
Call Barring7-8-2
Call Waiting7-8-3
Select network 7-8-4
Caller ID 7-8-5
Closed User Group7-8-6
Phone Info7-9
Planner 8
Calendar8-1
To Do List8-2
Alarm Clock8-3
Time/Date8-4
Memo Pad8-5
World Time8-6
Calculator8-7
Voice Kit 9
Voice Memo9-1
Record
Review
9-1-1
9-1-2
66
Menu Outline
Delete All 9-1-3
Voice Setting9-2
Choice Lists9-2-1
Digit Dialing9-2-2
Sensitivity 9-2-3
Sound9-2-4
About9-2-5
Voice Kit Active9-3
Section 4: Menu Navigation
67
68
Section 5: Entering Text
Topics Covered
• Changing the Text Input Mode
• Using T9 Mode
• Entering Upper and Lower Case
• Entering Symbols
• Entering Numbers
This section outlines how to select the desired text input
mode when entering characters into your phone. This
section also describes how to use the T9 predictive text
entry system to reduce the amount of key strokes
associated with entering text.
Section 5: Entering Text
69
Changing the Text Entry Mode
1. While composing a message, press the left soft key
(
) Option to display a pop-up menu with the
following options.
• ABC: Choose the method of text entry.
• Quick Text: Choose from up to 17 messages (11 are pre-
composed as factory defaults, but all 17 can be edited).
• Add Number: Add a number from your Phonebook.
• Send Option: Choose the priority, validity, privacy, and other
options for your message.
• Save in Draft: Save the message to your Draft folder.
• Edit Send To: Edit the Send To number of your recipient.
• Save Text: Save the text in your message to Quick Text for
later use.
2. ABC is highlighted. Use the navigation left/right keys to
choose from one of the other three text entry modes of
123, T9 Word, and Symbol. Each text entry mode is
explained in greater detail in the following sections.
Using T9 Mode
T9 Word recognizes the most commonly used word for
any sequence of key presses and inserts that word into
your message. It’s much faster than the traditional
methodoftextentry(Abc)andrequiresonlyonekeypress
per letter of the word that you’re spelling.
1. In standby mode, press the left soft key (
then press (Messages), (New Text Msg)
to compose a new text message.
) Menu,
70
Entering Upper and Lower Case
2. Enter the phone number of the recipient, then press
.
3. Press the left soft key (
) Option to display a pop-up
menu containing text entry mode options.
4. ABC is highlighted. Use the left/right navigation keys to
display T9 Word, then press
.
Now, for practice, enter the word “Samsung” into your
message by pressing each of the following keys only
once:
,
,
,
,
,
,
S
A
M
S
U
N
G
T9 Word recognizes that the most frequently used word
for the sequence that you just entered is “Samsung.” If
more than one word shares the same sequence, T9 Word
provides the most common of the two. Press
to
display other words in the dictionary, if available.
Entering Upper and Lower Case
• Enter characters while in ABC mode by pressing the key that
contains the desired characters ( for “h”).
• Press the key repeatedly to cycle through other available
characters for that key.
• Pause briefly when the desired character appears in the display
to accept the character and therefore insert it into the
message.
• Press
• To cycle between uppercase, lower case, and initial caps for
characters in ABC mode, briefly press
Section 5: Entering Text
to enter a space.
.
71
Entering Symbols
Symbol mode enables you to enter symbols such as @ or
% into a text message.
1. In standby mode, press the left soft key (
then press (Messages), (New Text Msg)
to compose a new text message.
) Menu,
2. Enter the phone number of the recipient, then press
.
3. Press the left soft key (
) Option to display a pop-up
menu containing the following options.
• ABC: Choose the method of text entry.
• Quick Text: Choose from up to 17 messages (11 are pre-
composed as factory defaults, but all 17 can be edited).
• Add Number: Add a number from your Phonebook.
• Send Option: Choose the priority, validity, privacy, and other
options for your message.
• Save in Draft: Save the message to your Draft folder.
• Edit Send To: Edit the Send To number of your recipient.
• Save Text: Save the text in your message to Quick Text for
later use.
4. ABC is highlighted. Use the left/right navigation keys to
display Symbol, then press
. The first of four
screens containing symbols appears in the display.
5. Use the navigation left/right keys to page through the
other symbols, if necessary.
6. Enter the key that corresponds with the symbol that you
wish to enter. For example, press
exclamation point (!).
for an
72
Entering Numbers
7. Repeat steps 3 through 6 to insert as many symbols into
your message as desired.
Entering Numbers
Enternumbersintoatextmessagewhileinnumbermode
instructions on changing text entry modes.
• While in 123 mode, press the key containing the number that
you wish to insert into your message.
Section 5: Entering Text
73
74
Section 6: Understanding Your
Phonebook
Topics Covered
• Opening Phonebook Menu
• Adding a Contact
• Adding Pauses
• Phonebook Groups
• Finding a Phonebook Entry
• Editing an Existing Phonebook Entry
• Deleting a Phonebook Entry
• Storing Numbers After a Call
• Manage SIM Phonebook
• Delete All
• My Name Card
• Finding My Phone Number
• Memory Information
• Speed Dialing
This section allows you to manage your daily contacts by
storing their name and number in your phonebook.
Phonebookentriescanbesortedbyname,entry,orgroup.
Section 6: Understanding Your Phonebook
75
Opening Phonebook Menu
The Phonebook menu provides access to powerful
features such as adding Groups, creating and sending V-
cards, and viewing the phone number assigned to your
phone by Verizon Wireless.
1. In standby mode, press the left soft key (
) Menu,
then press (Phonebook). The Phonebook sub
menus listed appear in the display.
• Find: Find a phone number By Name, By Entry, or By Group.
• New: Add a number, e-mail, or web address to your
Phonebook.
• Group: Rename one of your five groups.
• My Name Card: Create a business card, which can then be
sent to other as an attachment
• Send V-card: Send you Name Card or an entry in your
Phonebook to a compatible phone (not available on GSM
networks).
• My Phone #: View the 10-digit number assinged to phone
by Verizon Wireless.
• Memory Info: Display available memory for the Phone and
SIM card.
• Delete All: Delete all of your Phonebook entries.
2. Use the navigation key to highlight the Phonebook sub
menu of your choice, then press
.
76
Opening Phonebook Menu
Phonebook Icons
You can assign a host of entries to a Phonebook contact.
The icons in the following table represent all available
entry types
Name icon. Enter the name for the entry in this field.
Location icon. Assign a memory location for the entry in
this field.
Mobile icon. Enter a mobile number for the entry in this
field.
Home icon. Enter a home number for the entry in this
field.
Work icon. Enter the work number for the entry in this
field.
Fax icon. Enter a fax number for the entry in this field.
Pager icon. Enter a pager number for the entry in this
field.
E-mail icon. Enter an e-mail address for the entry in this
field.
URL icon. Enter a web address for the entry in this field
Group icon. Select an available group to associate with
the entry in this field.
Speed dial icon. Choose the speed dial number for this
field.
Melody icon. Select a melody to associate with the entry
in this field.
Section 6: Understanding Your Phonebook
77
Company icon. Enter the name of the company for the
entry in this field.
Job Title icon. Enter a job title for the entry in this field.
Memo icon. Enter a text memo for the entry (up to 48
characters) in this field.
SIM icon. The highlighted entry is saved to your SIM card.
Adding a Contact
When you add information to your Phonebook, you can
add it as a new entry or as an existing entry.
Method 1
1. In standby mode, press the left soft key (
then press (Phonebook),
) Menu,
(New). The
Phonebook opens, the cursor blinking in the Name field.
Note; If you are in GSM mode, after you press
(New), you’re prompted to select between Phone and SIM card
before the Phonebook opens.
(Phonebook),
2. Enter a name for the entry using the keypad.
3. Use the navigation key to highlight the speed dial entry
field (
). Use the left/right navigation keys
to select an available speed dial location, if desired.
4. Use the navigation key to highlight the appropriate type
(Mobile, Home, Office, E-mail, etc.). Once highlighted,
use the keypad to enter required information.
5. Use the navigation key to highlight other type fields, if
desired. Enter information using the keypad.
78
Adding a Contact
Note: Once you’ve entered a character into any of the type fields, press the
left soft key (
) Option to display a pop-up menu which allows you to
enter a P Pause or T Pause.
6. When you’re finished entering information for the entry,
press
to save the entry to your Phonebook.
Method 2
You can add new numbers to the Phonebook by simply
enteringthenumberwhilethephoneisinstandbymode,
then following the necessary prompts to complete the
process.
1. In standby mode, enter the number that you wish to save
using the keypad, then press
. You’re prompted to
select from New Entry or Add Existed Entry.
2. Press
press
to enter the number as a New Entry, or
to append the number to an entry that
Already Exists.
3. If you selected New Entry, proceed to step 5 to select
the number type. The following types are available.
•
•
•
•
•
Mobile
Home
Work
Fax
Pager
4. If you selected Add Existed Entry, proceed to step 8.
5. Use the left/right navigation keys to display the desired
type, then press
. The Phonebook opens.
Section 6: Understanding Your Phonebook
79
6. Enter a name for the entry using the keypad. Press the
left soft key ( ) Option if you wish to select a
different method of text entry, such as ABC, T9 Word,
Symbol, or 123.
7. When you’re finished entering information for the entry,
press
. The entry is saved to your Phonebook.
8. If you selected Add Existed Entry, the Phonebook opens
in Find mode. Use the navigation key to browse through
entries, or enter the name of the entry using the keypad.
9. Once you’ve highlighted the entry for which you wish to
append the number, press
. The number is appended
to the selected entry and saved to your Phonebook.
Adding Pauses (CDMA only)
Calls to automated systems often require a password or
account number. Instead of manually entering numbers
each time, store the numbers to your Phonebook along
with special characters called pauses.
• P pause: A hard pause stops the calling sequence until further
input from you.
• T pause: A two-second pause stops the calling sequence for
two seconds and then automatically sends the remaining
digits.
Note: Entering multiple two-second pauses extends the length of a pause.
For example, two consecutive two-second pauses cause a total pause time
of four seconds. Keep in mind pauses count as digits towards the 32-digit
maximum.
80
Adding Pauses (CDMA only)
Store pauses to a Phonebook entry (CDMA only)
1. In standby mode, enter the number you wish to store.
2. Press the left soft key ( ) Option. The following
pause menu options appear in the display.
• P pause
• T pause
Note: P pause is a hard pause (awaits input from you) and
T pause is a two-second pause.
3. Use the navigation key to highlight the pause option of
your choice.
4. Press
number sequence.
5. When you’re finished entering numbers and pauses,
press to store the number to your Phonebook.
to enter the highlighted pause into your
Pause dial from the Phonebook (CDMA only)
1. If you stored the number using (two-second) T pause(s),
simply recall the number from the Phonebook.
2. If you stored the number using (hard) P pause(s), recall
the number from the Phonebook and wait for the
appropriate prompt from the number you are calling
(credit card number, bank account number, etc.).
3. Press
to dial the number.
Manual pause calling (CDMA only)
1. To manually call a number with pause(s) without storing
it to the Phonebook:
Section 6: Understanding Your Phonebook
81
2. Enter the number you wish to call.
3. Press the left soft key (
) Option to display the
pause option pop-up menu.
4. Use the navigation key to highlight the desired pause
option.
5. Press
to enter the highlighted pause into your
to call the number.
number sequence.
6. Press
Note: Store pauses along with the number if you plan to call the number
frequently.
Phonebook Groups
You can place any Phonebook entry into one of five
categories, called “Groups.” Groups allow you to search
your Phonebook faster, quickly send messages to one or
more group members, and more.
Note: By default, new entries to your Phonebook are placed into the No
Name Group unless another group is specified.
View groups
1. In standby mode, press the left soft key (
then press (Phonebook),
) Menu,
(Group). The
following groups appear in the display.
• No Name
• Family
• Friends
• Colleague
82
Phonebook Groups
• Business
2. Use the navigation key to highlight the desired group,
then press to enter the group and view its contents.
Move an entry to another group
1. In standby mode, press the left soft key (
) Menu,
then press
(Phonebook),
(Group). The
following groups appear in the display.
• No Name
• Family
• Friends
• Colleague
• Business
2. Use the navigation key to highlight the group containing
the entry that you wish to move, then press
.
3. The group name appears in the top of the display, with
its contents (entries) appearing in the display beneath.
4. Use the navigation key to highlight the entry that you
wish to move to another group.
5. Press the left soft key (
appears in the display with Change Group highlighted.
6. Press . You’re given the option to select the group to
which you would like to move the entry.
7. Use the left/right navigation keys to select the
) Option. A pop-up menu
destination group, then press
the selected group.
. The entry is moved to
Section 6: Understanding Your Phonebook
83
Create a new group
In addition to the five groups already in your phone, you
can create additional groups (a maximum of 10). New
groups can be named anything you like as long as their
names are within the 12-character limit.
1. In standby mode, press the left soft key (
then press (Phonebook),
existing groups appear in the display.
2. Press the left soft key ( ) Option. A pop-up menu
appears in the display with New Group highlighted.
) Menu,
(Group). Your
3. Press . The New Group dialogue box appears in the
bottom of the display.
4. Enter a name for the group using the keypad. Press the
left soft key ( ) Option to select another mode of
text entry, if desired.
5. Press . The new group is saved.
Rename a group
Thefivedefaultgroupscannotberenamed.However,any
of the groups that you create can be renamed as long as
their names are within the 12-character limit.
1. In standby mode, press the left soft key (
then press (Phonebook),
existing groups appear in the display.
) Menu,
(Group). Your
2. Use the navigation key to highlight the group that you
wish to rename.
3. With the desired group highlighted, press the left soft key
(
) Option. A pop-up menu appears in the display.
84
Phonebook Groups
4. Use the navigation key to highlight Rename Group, then
press
. The Rename dialogue box appears in the
display.
5. Enter a name for the group using the keypad. Press the
left soft key ( ) Option to select the text entry mode.
6. Press . Your changes are saved.
Delete a group
The five default groups cannot be deleted. However, any
of the groups that you create can be deleted anytime.
1. In standby mode, press the left soft key (
then press (Phonebook),
existing groups appear in the display.
2. Use the navigation key to highlight the group that you
) Menu,
(Group). Your
want to delete, then press the left soft key (
)
Option.
3. Highlight Delete Group, then press
. A message
displays asking you to confirm the deletion.
Note: All entries within the group will be deleted. Move the entries to
another group before deleting the group if you wish to keep the entries.
4. Press the left soft key (
) Yes to delete the group
and all entries within, or press the right soft key (
)
No to return to the group list.
Section 6: Understanding Your Phonebook
85
Send a text message to members of a group
UseSendMessageintheGroupfeaturetosendamessage
to as many as 10 members of a group at once.
Note: This feature works in Verizon (CDMA) mode only. Text messaging
availability varies when roaming off the Verizon Wireless Network.
1. In standby mode, press the left soft key (
then press (Phonebook),
existing groups display.
) Menu,
(Group). Your
2. Use the navigation key to highlight the group to which
you want to send a message.
3. Press the left soft key (
) Option. A pop-up menu
appears in the display.
4. Use the navigation key to highlight Send Message, then
press . Those members of the group with a mobile
number or e-mail address appear in the display.
5. Use the navigation key to highlight a group member that
you want to send a message to, then press the left soft
key (
) Mark to add them to the message
distribution list.
6. Repeat step 5 until everyone you want to receive the
message is added to the distribution list.
Note: You can mark up to 10 members of a group for message distribution.
If you try and mark an 11th member, you’ll be notified that 10 addresses
have already been selected.
7. Press
. A pop-up menu appears in the display with
Text Msg highlighted.
86
Phonebook Groups
8. Press
. The list of addresses (or numbers) to which
the message will be delivered appears in the display.
9. Press . The message entry screen appears in the
display.
10. Enter the content of your message using the keypad.
11. To send the text message, press
.
Send a Pix Msg to members of a group
Note: Only available within Verizon Wireless Enhanced Services Area.
1. Follow steps 1 through 8 in the previous section entitled
2. With Text Msg and Pix Msg appearing in the pop-up
menu, use the navigation key to highlight Pix Msg, then
press
.
3. The list of addresses (or numbers) to which the message
will be delivered appears in the display.
4. Press
. The Pix Msg composer appears in the
display with the options listed in the following table
• Add Message: Add text to the Pix Msg.
• Add Sound: Add sound to the Pix Msg
• Add Image: Add an image to the Pix Msg
• Add Subject: Add a subject to the Pix Msg.
• Attach: Attach a Name Card or an entry in your Phonebook to
the message
5. Use the navigation keys to highlight the desired option.
6. Use the left right navigation keys to enter the option’s
sub menu and perform the function listed.
Section 6: Understanding Your Phonebook
87
7. Once you’ve finished adding the desired content to your
Pix Msg, you’re returned to the Pix Msg composer.
8. Press
to send the Pix Msg. The Pix Msg is sent to
the intended recipients.
Finding a Phonebook Entry
From standby mode, you can quickly open the Contacts
list. Contacts is a quick way of viewing entries you’ve
stored in the Phonebook.
• In standby mode, press the right soft key (
) Contacts.
Your list of Phonebook entries appears in the display.
Note: The SIM card and phone icon (
entries stored on the SIM card.
) appears to the right of any
Editing an Existing Phonebook Entry
1. In standby mode, press the left soft key (
) Menu,
then press
(Phonebook),
(Find).
2. Use the navigation key to display the search method that
you wish to use (By Name, By Entry, By Group, or Sim
Only.
3. Enter information to find the entry, or use the navigation
key to highlight the entry that you wish to edit.
4. Once the entry is highlighted, press
.
5. Use the navigation key to highlight the number, e-mail
address, or other field that you wish to edit, then press
the left soft key (
6. A pop-up menu appears in the display with Edit
highlighted. Press
) Option.
.
88
Deleting a Phonebook Entry
7. Press
symbols.
to backspace and delete numbers, text, or
8. Press and hold
to erase all numbers in the
highlighted field.
9. Use the keypad to re-enter numbers, text, or symbols.
10. When you’re finished editing the entry, press
. Your
changes are saved.
Deleting a Phonebook Entry
1. In standby mode, press the left soft key (
) Menu,
then press
(Phonebook),
(Find).
2. Use the left/right navigation keys to display the search
method that you wish to use (By Name, By Group, etc.).
3. Enter information to find the entry, or use the navigation
key to highlight the entry that you wish to erase.
4. Press
.
5. Once the entry is highlighted, press the left soft key
Option. A pop-up menu displays Edit and Delete.
6. Use the navigation key to highlight Delete, then press
. You’re prompted to confirm the erasure.
7. Highlight Yes or No, then press
.
Section 6: Understanding Your Phonebook
89
Delete All
CDMA mode
Delete All (in CDMA mode) allows the deletion of all
entriesinyourPhonebookbutnotthoseonyourSIMcard.
1. In standby mode, press the left soft key (
then press (Phonebook),
You’re prompted to enter the lock code.
) Menu,
(Delete All).
2. Enter the lock code. The default lock code is the last four
digits of your phone number. The phone prompts you to
confirm the deletion of all entries.
3. Press the left soft key (
) Yes to delete all
Phonebook entries, or press the right soft key (
to return to the Phonebook menu.
) No
GSM mode
Delete All (in GSM mode) allows you to delete all entries
in both the Phonebook and SIM card.
1. In standby mode, press the left soft key (
then press (Phonebook),
) Menu,
(Delete All).
You’re prompted to enter the lock code for the phone.
2. Enter the lock code. The default lock code is the last four
digits of your phone number. A pop-up menu appears in
the display with the options listed in the following table
• Cell Phonebook: Delete all entries in your Phonebook, but
not those on the SIM card.
• SIM Phonebook:Delete all entries on the SIM card, but not
those in Phonebook memory.
• All Phonebook: Delete all entries in your Phonebook and
the SIM card
90
Storing numbers after a call
3. Use the navigation key to highlight an option. Press
to perform the function for the highlighted option.
4. When asked to confirm deletion of the selected memory,
press the left soft key (
the right soft key (
menu.
) Yes to continue or press
) No to return to the Phonebook
Storing numbers after a call
Once you’ve finished a call, you can store the number of
the caller to your Phonebook.
Note: If the call was incoming and Caller ID information was unavailable,
then the store option is also unavailable.
1. After you press
to end your call, the call time,
length of call, phone number, and name of the party (if
available) appears in the display.
2. Press the right soft key (
) Save. You’re prompted
to confirm this as a New Entry, or Add Existed Entry.
3. Follow the on-screen prompts to designate other
information.
Store a number in standby mode
Storeaphonenumberbyenteringthenumberinstandby
mode,thenpress
.Followthescreenpromptstoassign
number types and other information.
Manage the SIM Phonebook
Entries can also be stored on the SIM card provided by
Verizon Wireless. The storage capacity of the SIM card
dependsupontheSIMcardtype.YoucanviewstoredSIM
Section 6: Understanding Your Phonebook
91
entries, and even copy them to the Phonebook while in
Verizon (CDMA) mode. However, to edit or save entries
on the SIM card, you must be in Int’l (GSM) mode.
Store new entries to the SIM card
1. With the phone in Int’l (GSM) mode (and standby mode),
enter the number that you wish to store to the SIM card.
2. Press
(Save). A pop-up menu appears in the display
. The Select Type screen appears in the
with New Entry highlighted.
3. Press
display.
4. Press the left or right navigation key until SIM appears in
the display, then press
.
5. Enter a name for the entry that you are storing to the SIM
card using the keypad.
• Press the left soft key (
) Option to display a pop-up
menu that allows you to choose alternative methods of text
entry such as T9 Word and Symbol, if desired.
6. After entering a name for the entry, highlight the location
field using the navigation key.
7. Use the left/right navigation keys to change the location
number. Otherwise, press
to save the entry to your
SIM card with the location number unchanged.
Edit, Delete, or Copy SIM card entries (GSM Only)
1. With the phone in Int’l (GSM) mode (and standby mode),
press the right soft key (
) Contacts. The list of
entries stored to your Phonebook and SIM card appear
as a list in the display.
92
Manage the SIM Phonebook
Note: The SIM card and phone icon (
entries stored on the SIM card.
) appears to the right of any
2. Use the navigation key to highlight the SIM entry that you
wish to edit or delete.
3. Press the left soft key (
) Option. A pop-up menu
with the options listed in the following table appears in
the displayNew: Store a new entry to the Phonebook or
SIM card.
• New: Add new entry to Phonebook or SIM card.
• Find: Find entries stored in the Phonebook or SIM card.
• Edit: Edit information for the highlighte entry.
• Delete: Mark and delete several enries at once.
• Mark & Delete: Mark and delete several entries at once.
• Copy to Phonebook: Copy the SIM entry to the
Phonebook.
4. Use the navigation key to highlight the desired option,
then press
to perform the function for the
highlighted option.
Finding stored names
If you’ve stored a name entry to your Phonebook or SIM
card, Find allows you to locate it quickly.
1. In standby mode, press the left soft key (
) Menu,
then press (Phonebook), (Find).
2. Use the left/right navigation keys to select the method by
which to find the entry. The Find methods listed appear
in the display.
Section 6: Understanding Your Phonebook
93
• By Name: Search the Phonebook alphabetically by name.
Enter the name of the person as they are entered in your
Phonebook (last name first, etc.).
• By Entry: Search the Phonebook by entry number.This is the
same number assigned to Speed dial (002, 003, etc.)
• By Group: Search the Phonebook by selecting from one of
the five available groups. This option only works if you’ve added
entries to one of the groups.
• SIM Only: Search for entries on the SIM card (only).
Moreinformationoneachofthesemethodsisavailablein
the following sections.
By Name
1. Enter the name of the person as they are entered in your
Phonebook. For example, if you saved the name as Amy
Smith, begin the search by pressing
(for “A”). As
you enter characters, the closest matches to the
characters that you enter appear in the display.
2. When the desired entry appears in the display, highlight
the entry using the navigation key.
3. Press
to dial the number associated with the
to view information about the entry.
name.
4. Press
5. Press the left soft key (
) Option to display the
options listed in the following table
• Edit: Edit details of the highlighted name.
• Delete: Erase the name and associated information.
6. Use the navigation key to highlight an option, then press
to enter the highlighted option’s sub menu.
94
Manage the SIM Phonebook
By Entry
This option allows you to find a stored entry by location
(or speed dial) number.
1. In standby mode, press the left soft key (
) Menu,
then press (Phonebook), (Find).
2. Use the left/right navigation keys to display by Entry.
3. Enter the location number using the keypad. Entries
appear in the display below the entry field.
4. Use the navigation key to highlight the entry. Press
to display information about the entry.
5. Press the left soft key (
) Option to display the
options listed
• Edit: Edit details of the highlighted name.
• Delete: Erase the name and associated information.
6. Use the navigation up/down keys to highlight an option,
then press
to enter the option’s sub menu.
By Group
This option allows you to find a stored entry in a related
group.
1. In standby mode, press the left soft key (
) Menu,
then press (Phonebook), (Find).
2. Use the left/right navigation keys to display By Group.
3. Press the navigation key down briefly to highlight the
group field.
4. Use the left/right navigation keys to display the group
that you wish to search. As each group appears in the
display, entries assigned to the group appear beneath.
Section 6: Understanding Your Phonebook
95
5. Use the navigation key to highlight the desired entry.
6. Press to display information about the entry.
7. Press the left soft key (
) Option to display the
options listed.
• Edit: Edit details of the highlighted name.
• Delete: Erase the name and associated information.
8. Use the navigation up/down keys to highlight an option,
then press
to enter that option’s sub menu.
SIM Only
Use this option to find entries stored solely on your
Verizon Wireless SIM card.
1. In standby mode, press the left soft key (
) Menu,
then press (Phonebook), (Find).
2. Use the left/right navigation keys to display SIM Only.
Any entries stored to your SIM card appear in the display.
3. If you have a large number of entries on your SIM card,
use the keypad to enter search criteria in the dialogue
box beneath SIM Only. Otherwise, use the navigation
keys to highlight the desired SIM entry.
4. Press
information, if desired. Press
the highlighted entry.
to open the highlighted entry and view other
if you wish to dial
96
Speed Dialing
Speed Dialing
Note: 1-Touch, 2-Touch, and 3-Touch dialing allows you to call numbers
stored in your Phonebook quicker.
Speeddialingallowsyoutopressandholdakey(orkeys)
todialthenumberassociatedwiththosekey(s). Thereare
three types of speed dialing; 1-touch, 2-touch, and 3-touch
dialing.
Note:
is reserved for voicemail.
1-touch dialing
Call phone numbers assigned to memory locations 002 -
009 by pressing and holding the any of the 2 - 9 keys. For
example, to speed dial the number assigned to location 2,
pressandhold
untilthenameandnumberappear
in the display and the number is dialed.
2-touch dialing
Callphonenumbersassignedtokeys010through099by
briefly pressing the first key, then pressing and holding
the second key. For example, to speed dial the number
assigned to 013, briefly press
until the number dials.
, then press and hold
3-touch dialing
Call phone numbers assigned to memory locations 100
through 500 by briefly pressingthe first and second keys,
then pressing and holding the third key. For example, to
dial location number 113, briefly press
,
, then
press and hold
until the number dials.
Section 6: Understanding Your Phonebook
97
Assign a speed dial location
1. In standby mode, press the left soft key (
) Menu,
then press
(Phonebook),
(Find).
2. Use the left/right navigation keys to display and select
the Find method (By Name, By Group, etc.).
3. Enter the information you want to find into Find or use
the navigation keys to highlight the entry you want, then
press
.
4. Use the navigation keys to highlight the speed dial
location field and press the left soft key (
) Edit.
5. Enter the speed dial location using the keypad.
Note: You can also use the left and right navigation keys to browse for
available speed dial locations.
6. Press
to save your changes.
Assign speed dial type to an entry
If you have more than one number (or type, such as
Mobile or Office) for a Phonebook entry, you can select
which number you wish to be dialed when speed dialing
the entry.
1. In standby mode, press the left soft key (
) Menu,
then press (Phonebook), (Find).
2. Use the navigation key to select the find method
(By Name, By Group, etc.).
3. Enter information to find the entry, or use the navigation
key to highlight the desired entry.
4. Press
.
98
My Name Card
5. Use the navigation key to highlight the SpeedDial field,
then press the left soft key (
) Edit.
6. Use the left and right navigation keys to select the
desired number (type) for speed dialing.
7. Press
. Your changes are saved.
My Name Card
My Name Card allows you to create a virtual business
card.Oncecompleted,youcansendthecardtorecipients
as a V-card attachment.
1. In standby mode, press the left soft key (
) Menu,
then press
(Phonebook),
(My Name Card).
2. My Name Card opens with the cursor blinking in the
name field.
3. Enter information in each of the fields as desired. Use
the navigation key to move between fields, then use the
keypad to enter information.
4. When finished, press
to save the V-card.
Send V-card (CDMA Only)
Note: May not be available on all CDMA networks.
Once you’ve created a V-card, you can send it to another
compatible Verizon Wireless phone or any e-mail
address.
Section 6: Understanding Your Phonebook
99
Note: The following steps outline sending a V-card by going through each
and every option for adding images, sounds, and messages to the V-card.
If you wish to send the V-card without such additional information, press
after step 4.
1. In standby mode, press the left soft key (
then press (Phonebook),
) Menu,
(Send V-card).
A pop-up menu appears in the display with My Name
Card highlighted.
2. Press
to select My Name Card or press
to select and send an entry from your Phonebook.
3. If you selected My Name Card, press
screen to send the V-card. The Send To field appears in
the display.
at the next
4. Enter a Verizon Wireless phone number or any e-mail
address using the keypad, then press
composer appears in the display.
. The Pix Msg
Note: To enter special characters necessary for an e-mail address, press
the left soft key (
) Option to display a pop-up menu where you can
select from a variety of characters.
5. The Add Message field is highlighted. Press the right
navigation key to enter the message composer.
6. Enter a message using the keypad, then press
.
7. Press the down navigation key to highlight the Add
Sound field.
100
My Name Card
8. Press the right navigation key to display the Add Sound
menu. Choose from four options:
• Preloaded Melody
• My Sounds
• Voice Memo
• Record Voice
Note: If you choose Preloaded Melody, you can only send midi-type sound
files and not the melody files.
Once you’ve selected a sound from the Add Sound menu,
you’re returned to the Pix Msg composer.
9. Press the down navigation key to highlight the Add
Image field. Press the right navigation key to display the
Add Image menu, where you can select from a variety of
image options to enhance your V-card. Press the right
soft key (
desired.
) Back to exit the Add Image menu, if
10. Once you’ve returned to the Pix Msg composer, press
the down navigation key to highlight Add Subject.
11. Press the right navigation key if you wish to enter a
subject for the V-card, or press the right soft key (
Back to cancel entering a subject.
)
12. Once you’ve returned to the Pix Msg composer, press
to send the V-card. Sending... appears in the
display as the V-card is sent to the intended recipient.
Section 6: Understanding Your Phonebook
101
Finding My Phone Number
My phone # displays the ten-digit number assigned to
your phone by Verizon Wireless.
• In standby mode, press the left soft key (
) Menu, then
(My Phone #). The phone
press
(Phonebook),
number assigned to your phone by Verizon Wireless appears in
the display.
Memory Information
MemoryInfodisplaystheTotal,Used,Reserved,andFree
memory for the Phonebook and SIM Memory.
Note: Reserved memory is only available in the Phonebook and doesn’t
appear under SIM Memory.
1. In standby mode, press the left soft key (
then press (Phonebook),
) Menu,
(Memory Info).
Memory information for your Phonebook and SIM card
appear in the display.
2. Use the navigation up/down keys to scroll through the
information in the display, if desired.
102
Section 7: Messaging
Topics Covered
• Types of Messages
• Web Alerts
• Message Folders
• Retrieving New Messages
• Voicemail
• Creating and Sending New Messages
• Changing Message Settings
This section allows you to send or receive different types
ofmessages.Italsoincludesthefeaturesandfunctionality
associated with messaging.
Section 7: Messaging
103
Types of Messages
Thea795iscapableofsendingemailandtextmessesages.
Sendemailor text messages by simplyentering the email
address or the phone number of the recipient in the To:
<.........> or Send To field when creating a new message.
Web Alerts
Note: This feature is currently unavailable outside of the United States.
Occasionally, Verizon Wireless may send notifications to
your phone in the form of Web Alerts. These alerts may
contain information regarding new services or updates.
When you receive an alert, you will receive a text
notification and hear an audible tone.
1. In standby mode, press the left soft key (
) Menu,
then press (Messages), (Web Alert). Any
web alerts that you have received appear in the display.
Note: Contact Verizon Wireless for availability.
Message folders
Inbox
Received messages of all types are stored in the Inbox
folder.
1. In standby mode, press the left soft key (
) Menu,
then press (Messages), (Inbox).
2. Use the navigation key to highlight the message that you
wish to view.
104
Message folders
3. Press
to view contents of the highlighted message.
4. While viewing a message press the left soft key (
)
Option to display the options listed.
• Reply: Reply to the message.
• Forward: Forward the message to another recipient.
• Delete: Delete the message and its contents.
• Save Address: Save the number of the sender to your
Phonebook as a new entry or add to an existing entry.
• Save Text: Save only the text within a message.
• Save Msg: Save the message to the Saved/Draft folder.
5. Use the navigation key to highlight an option. Press
to perform the function for the highlighted option.
Outbox
Your phone stores messages in the Outbox, regardless of
whetherthemessagewassuccessfullytransmitted.Verify
if and when a message or e-mail was successfully
transmitted by enabling the Delivery Ack feature.
Note: Delivery Ack may not be available on all GSM networks and when
roaming off the Verizon Wireless Network.
Review messages in the Outbox
1. In standby mode, press the left soft key (
then press (Messages), (Outbox). Any
sent messages appear in the display.
2. Use the navigation key to highlight the message that you
wish to review, then press
) Menu,
.
3. While viewing the message, press the left soft key
) Option to display the options listed.
(
Section 7: Messaging
105
• Resend: Resend the message to the original recipient.
• Delete: Delete the message.
• Save Msg: Save the message to the Drafts folder.
4. Use the navigation key to highlight the desired option.
5. Press
to perform the function for the highlighted
option.
Messages and lock mode
Your phone still receives messages while in Lock Mode.
The time and date of the message appear in the display,
butyoucannotaccessthemessageuntilyouenterthelock
code.
Saved/Draft
Saved/Draft messages are those that have been
composed but never sent. You can return to the Saved/
Draft folder at any time to view, edit, or send a Saved/
Draft message.
Create a draft text message
1. In standby mode, press the left soft key (
) Menu,
then press (Messages), (New Text Msg).
2. Enter the phone number of the recipient, then press
.
3. Compose your message using the keypad, then press
the left soft key (
in the display.
) Option. A pop-up menu appears
106
Message folders
4. Scroll down with the navigation key until Save in Draft is
highlighted, then press
. A confirmation message
appears in the display and your message is saved to the
Saved/Drafts folder.
View and edit Draft messages
1. In standby mode, press the left soft key (
) Menu,
then press
(Messages),
(Saved/Draft).
Any draft messages that you’ve composed appear as a
list in the display.
2. Use the navigation key to highlight the message that you
wish to view, then press
. The message opens in the
Send To field with the address or number of the intended
recipient.
3. Press
4. Press the CLR key (
current characters in the display, if desired. Press and
hold to erase all characters.
5. Press the left soft key ( ) Option. A pop-up menu
. The message composer opens.
) to backspace and delete any
appears in the display with the options listed.
• ABC: Choose the text entry mode. Options are ABC, 123, T9
Word, and Symbol.
• Quick Text: Insert a pre-composed text message into your
current message.
• Add Number: Add a number to the current message from
the Phonebook.
• Send Option: Choose the Priority, Validity, and Privacy of
your message. You can also insert a signature and insert a
callback #.
Section 7: Messaging
107
• Save In Draft: Save the message (with changes) back to the
Drafts message folder.
• Edit Send To: Edit the Send To number for the message.
• Save Text: Save only the text in the message, if the message
contains media or other content.
6. Use the navigation key to highlight the desired option.
Press
to perform the function for the highlighted
option.
7. Once you’ve returned to the message composer, press
to send the message, if desired.
Retrieving New Messages
While text messages from other phones are delivered
directly to your phone, Pix messages and Emails will be
stored in the Inbox of the message server and the server
will alert you to new messages. Therefore you need to
retrieve new messages to your phone and read them on
the phone.
Retrieving a Text Message
Note: May not be available on all GSM networks and when roaming off the
Verizon Wireless Network.
When you receive a message in standby mode, the ringer
sounds,(unlessturnedoff),andNewTextMsgappearsin
the display along with the closed envelope icon( ). The
date and time of the message also appear in the display.
1. Press the left soft key (
) Ignore to return the phone
to standby mode. The message is saved to your inbox
where you can view it later.
108
Voicemail
2. Press the right soft key (
) View to open the
message, where you have the option to Reply, Forward,
Delete, Save Address, Save Text, or Save Msg.
Voicemail
New voicemail alerts are sent via an SMS text message.
These messages indicate how many new and urgent
voicemails are in your box. When all voicemails has been
listened to, a message is sent notifying you there are zero
newmessageswaiting.Openthetextmessagetoviewthe
number of new and urgent voice messages in your voice
mailbox. If a caller leaves a callback number, this number
will also be sent via an SMS text message.
Receive Voicemail messages
When you receive a new voicemail message you’ll hear a
sound and an SMS text message appears in the display.
1. Press the left soft key (
) to Ignore, or press the
right soft key (
) to View and open the details about
the new message.
Section 7: Messaging
109
Creating and Sending New Messages
This section guides you through the procedure to send
various types of messages.
Creating and Sending Text messages
Note: May not be available on all GSM networks and when roaming off the
Verizon Wireless Network.
1. In standby mode, press the left soft key (
then press (Messages), (New Text Msg)
to compose a new text message.
2. Enter the phone number of the recipient, or press the left
soft key ( ) Option to display a pop-up menu with
) Menu,
the options listed
• ABC: Choose from ABC, 123, T9 Word, and Symbol modes of
text entry.
• @: Insert the @ symbol (for email), or select one of the
domain suffixes of .com, .edu, .org, and .net.
• Phonebook: Select recipients from your Phonebook
• Group: Select recipients from one or more of your groups
• Recent Calls: Select recipients from one or more recent
calls.
• Save Address: Save the address you just entered to the
Phonebook.
3. After selecting or entering your recipients in the Send To
field, press
display.
. The message composer appears in the
110
Creating and Sending New Messages
4. Compose your message using the keypad. At any point
while composing a message, press the left soft key
(
) Option to display the options listed in the
following table.
• ABC: Choose the method of text entry.
• Quick Text: Choose from up to 17 messages (11 are pre-
composed as factory defaults, but all 17 can be edited).
• Add Number: Add a number from your Phonebook.
• Send Option: Choose the priority, validity, privacy, and other
options for your message.
• Save in Draft: Save the message to your Drafts folder.
• Edit Send To: Edit the Send To number of your recipient.
• Save Text: Save the text in your message to Quick Text for
later use.
5. Use the navigation key to highlight an option. Press
to perform the function for the option, or to enter its
sub menu.
6. To send the message, press
Send Option
.
Send Option set priority, validity, privacy, and other
options before you send a message.
Note: May not be available on all GSM networks. Priority, and Privacy are
NOT supported for GSM SMS.
1. At the message composer screen, press the left soft key
(
) Option. A pop-up menu appears in the display.
2. Use the navigation key to highlight Send Option, then
press . The Send Option categories and options
listed in the following table appear in the display
Section 7: Messaging
111
• Priority: Assign a priority to your message.
• Validity: Select the period of time that you wish the message
to be available to the recipient. After the set period of time, your
message is recalled.
• Privacy: Choose the desired level of privacy for your
message.
• Insert Signature: Insert your pre-composed signature into
the message.
• Callback #: Insert a number into your message for the
recipient to call you back.
• Def. Delivery: Choose when you wish your message to be
sent.
3. Use the up/down navigation keys to highlight a category.
Once a category is highlighted, use the left/right
navigation keys to browse through the options for the
selected category.
4. When the desired option is highlighted, press
to
confirm the selection or to enter the option’s sub menu.
112
Section 8: Changing Your Settings
Topics Covered
• Display Settings
• Profile Settings
• Shortcut
• Security Settings
• Location Settings
• Changing Message Settings
• Call Options
• Ringer Settings
• Resetting Your Phone
• GSM Services
This section explains the menu navigation for your
phone. It also includes an outline of all the available
menus associated with your phone.
Section 8: Changing Your Settings
113
Display Settings
The Display sub menu affects the menu style, standby
mode animation, backlight settings, and more.
1. In standby mode, press the left soft key
Menu,
then press (Settings), (Display). The
Display sub menus listed in the display
• Language: Choose the display language (English or Español)
• Style: Choose Dynamic to animate your menus or choose
Basic to view menus in a list format.
• Animation: Choose the media that appears in the display
when you turn the phone on, off, or when the phone is in
standby mode
• Banner: Create your own personalized greeting that appears
in the display when your phone is in standby mode.
• Backlight: Choose settings for the LCD, Keypad, and Power
Save.
• Service LED: Turn the service LED on or off
• Auto Hyphen (CDMA Only): With Auto Hyphen enabled,
your phone automatically hyphenates phone numbers as they
are entered. Auto Hyphen is only available in CDMA mode.
2. Use the navigation key to highlight the display sub menu
that you wish to edit, then press
.
3. Use the navigation key to select from the sub menu
options that appear in the display, then press
settings are saved.
. Your
114
Display Settings
Language
Change the display language from English to Español or
vice versa using the Language sub menu.
1. In standby mode, press the left soft key
then press (Settings), (Display),
(Language).
2. Use the navigation key to select the language of your
choice, then press
Menu,
.
Style
The Style sub menu allows you to choose the format in
which main menus appear in the display.
1. In standby mode, press the left soft key
then press (Settings), (Display),
(Style).
2. Use the navigation key to highlight Basic or Dynamic,
then press
Menu,
.
Animation
Animation allows you to choose the multi-media or
pictures that appear in your phone’s display when you
turn it on, turn it off, and while the phone is in standby
mode.
Choose Power On or Power Off animation
1. In standby mode, press the left soft key
then press (Settings), (Display),
(Animation).
2. Use the navigation key to highlight Power On (or Power
Menu,
Off), then press
. The current animation plays.
Section 8: Changing Your Settings
115
3. Use the left/right navigation keys to choose between
Power On (Off) 1 or Power On (Off) 2, then press
Your settings are saved.
.
Choose the Wallpaper
1. In standby mode, press the left soft key (
then press (Settings), (Display),
(Animation)
2. Use the navigation key to highlight Wallpaper, then
) Menu,
.
press
. Main LCD and Sub LCD appear in the
display.
3. Use the navigation key to highlight Main LCD or Sub
LCD, then press
.
4. If you selected Main LCD, choose from the three
available options of Image Gallery, and World Time,
then press
step 6.
. If you selected Sub LCD, proceed to
5. Follow the prompts to select the wallpaper that will
appear in the main LCD display while your phone is in
standby mode.
6. If you selected Sub LCD, choose an image from the
image gallery, then press
.
7. Follow the prompts to select the wallpaper to appear in
the sub LCD while your phone is in standby mode.
Note: If you select the Dual Clock World Time Wallpaper, the you will need
to set the Daylight Savings Time flag for the Home area time zone. See
116
Display Settings
Banner
Banner allows you to create your own personalized
greeting that appears in the display while your phone is
in standby mode.
1. In standby mode, press the left soft key (
) Menu,
then press
(Settings),
(Display),
(Banner).
Note: Press and hold
to erase an existing banner, if necessary.
2. Enter a word or short phrase (12 characters or less) to
appear in your phone’s display when the phone is in
standby mode.
3. Press
Backlight
to save the new banner.
Setthebacklightforthedisplayorkeypadtoremainonfor
aspecifiedperiodoftimeortoremainonaslongastheflip
is open.
Note: Prolonged backlight use drains your battery faster.
1. In standby mode, press the left soft key (
then press (Settings), (Display),
(Backlight). The sub menus listed appear in the
) Menu,
display.
• LCD: Set the time for which the LCD backlight remains on
after a period of inactivity. Optional settings are 5, 10, 15
seconds, and Folder Open
Section 8: Changing Your Settings
117
• Keypad: Set the time for which the keypad backlight remains
on after a period of inactivity. Optional settings are 5, 10, 15
seconds, and Folder Open
• Power Save: With Power save On and the flip closed (while
not in a call), the external LCD turns off to conserve power. WIth
Power save Off and the flip closed (while not in a call), the
external LCD remains on when the flip is closed
Internal (Main) LCD
Unless the backlight setting for the LCD has been
changed, the backlight dims after a minute of inactivity,
and then turns off. With Power Save enabled, the
backlight for the LCD is always dim. After one minute of
inactivity, Power Save turns the backlight off.
External (Sub) LCD
With Power save On and the flip closed (while not in a
call), the external LCD turns off to conserve power. WIth
Power save Off and the flip closed (while not in a call),
the external LCD remains on when the flip is closed
2. Use the navigation key to highlight a sub menu.
3. Press
to enter the highlighted option’s sub menu
and change settings as desired.
Service LED
UsetheServiceLEDsubmenutoturntheServiceLEDon
or off. The Service LED has the following functions:
• Flashes to indicate an incoming call or message.
• Lights momentarily when you power up the phone, and flashes
red when the phone is in need of a charge.
• Flashes green to indicate you are in your home coverage area.
118
Profile Settings
1. In standby mode, press the left soft key (
) Menu,
then press
(Settings),
(Display),
(Service LED).
2. Use the navigation key to highlight On or Off, then press
. Your settings are saved.
Auto hyphen (CDMA Only)
AutoHyphenautomaticallyhyphenatesphonenumbers
as they are entered. For example: 580-437-0000.
1. In standby mode, press the left soft key (
) Menu,
then press (Settings), (Display),
(Auto Hyphen). On and Off appear in the display.
2. Use the navigation key to highlight On or Off, then press
. Your settings are saved.
Profile Settings
Profiles define properties for such things as ringtones,
alerts, andthesoundsyourkeypadmakeswheneveryou
press a key. Settings for each of the four available profiles
can be left at default or edited to suit your needs. Select,
edit, and/or use the appropriate profile for situations
such as meetings, while driving, or when you are
outdoors.
1. In standby mode, press the left soft key (
then press (Settings), (Profile). The
following profiles appear in the display.
) Menu,
• Normal: The default profile. Ringtones, alerts, and other
settings are set to typical levels necessary for normal operation.
• Meeting: Ringtones and alarms are set to silent, or low-level
so that others aren’t disturbed when you receive a call.
Section 8: Changing Your Settings
119
• Drive: Default settings for ringtones and alarms are set to
levels that will catch your attention while driving.
• Outdoor: Default settings for ringtones and alarms are set to
the highest audible level.
2. Highlight the profile that you want to select or edit.
3. To select the profile for use, press
profile, press the left soft key (
menus appear in the display
, or to edit the
) Edit. These sub
• Volume/Vibrate: Set the volume level or vibrate setting for
calls and alarms.
• Ringer Type: Choose the ringer type for calls and data.
• Key Beep: Set the volume, length, and tone type for when
keys are pressed for the selected profile.
• Alerts: Turn alerts on or off for when you disconnect a call,
enter a roaming area, lose service, and more for the selected
profile.
• Power On/Off: Turn the power on/off sound off or on for the
selected profile.
• Roam Ringer: Turn the roam ringer on or off for the selected
profile.
• Whisper:Turn whisper mode on or off for the selected profile.
• Folder Sound: Turn the sound generated whenever you
open or close the folder on or off for the selected profile.
4. Use the navigation key to highlight the sub menu that
you wish to edit, then press
.
5. Use the navigation key to select from the sub menu
options that appear in the display, then press
settings are saved.
. Your
120
Shortcut List
6. Press
to return to the Profile sub menu or press
to return to standby mode.
Shortcut List
Shortcut List allows you to select from up to seven
applications that appear in the display when you press
the up navigation key in standby mode.
1. In standby mode, press the left soft key (
then press (Settings), (Shortcut List).
The Shortcut List sub menu appears in the display.
2. Press ( ) New. A list of applications and menus
appears in the display.
) Menu,
3. Use the navigation key to highlight a menu or
application, then press
.
4. If a list of sub menus appears in the display, use the
navigation key to highlight the desired sub menu, then
press
. The shortcut is added to the list.
Security Settings
TheSecuritysubmenuallowsyoutolockyourphone, set
up emergency numbers, enable or disable voice privacy,
set restrictions, and other security options.
Lock Phone
Lock Phone restricts the use of your phone with the
exception of outgoing calls to 911 and the three user-
programmed emergency numbers. Lock Phone allows
youtoanswercalls,buttoplacecalls(excepttoemergency
numbers) you have to unlock the phone.
1. In standby mode, press the left soft key (
) Menu,
Section 8: Changing Your Settings
121
then press
(Settings),
(Security). You’re
prompted to enter the lock code. The default lock code is
the last four digits of your telephone number.
2. Enter the Lock Code. Several security sub menus appear
in the display.
3. Press
the display
(Lock Phone). The options listed appear in
• Never: The Lock Code is never required.
• Power On: The Lock Code is required whenever you power
up the phone.
• Now: Your phone returns to standby mode. The the Lock
Code is required immediately to access any functions.
4. Use the navigation keys to highlight the desired Lock
Phone option.
5. Press
to perform the function for the highlighted
option.
Change Lock
The default lock code is the last four digits of your phone
number. Change Lock allows you to change this codeto a
lock code of your preference.
1. In standby mode, press the left soft key (
then press (Settings), (Security). You’re
prompted to enter the lock code.
2. Press (Change Lock). You’re prompted to enter
the new lock code.
) Menu,
3. Enter the new lock code. You’re prompted to confirm the
new lock code.
122
Security Settings
4. Enter the new lock code again for confirmation.
5. A message appears in the display confirming that your
lock code has been changed.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
Emergency #
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If you
call 911 an audible tone is heard and an emergency prompt appears in the
display for the duration of the call.
You can store up to three emergency numbers to your
phone. Each number can be up to 32 digits in length. All
emergency numbers can be dialed any time, even when
your phone is locked or restricted.
Important: Because of various transmission methods, network
parameters, and user settings used to complete a call from your wireless
phone, a connection cannot always be guaranteed. Therefore, emergency
calls may not be available on all wireless networks at all times.
Important: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
Remember to always turn your phone on and check for
adequate signal strength before placing a call.
Section 8: Changing Your Settings
123
Store emergency numbers
1. In standby mode, press the left soft key (
) Menu,
then press
(Settings),
(Security). You’re
prompted to enter the lock code. The default lock code is
the last four digits of your telephone number.
2. Enter the lock code, then press
3. Press or to open one of the empty
emergency number slots for editing.
(Emergency #).
Note: Emergency numbers 911, #911, *911, 112, and 999 cannot be
edited.
4. Enter the emergency number (up to 32 digits in length).
5. Press
to save the number, or press the right soft key
(
) Cancel to exit without saving changes.
Call emergency numbers in lock mode
Youcandialanyofthenumbers911,112,or999toplacean
emergency call.
If your phone is in Verizon (CDMA) mode and you dial
112or999, thenpress
, thepromptMakeemergency
call? appears in the display.
• If you press the left soft key (
emergency number 911.
) Yes, your phone dials the
• If you press the right soft key (
) No, the call is
discontinued and your phone returns to standby mode.
Note: If you dial 911 while in Verizon (CDMA) mode, your phone dials the
emergency number immediately (no prompt).
124
Security Settings
If your phone is in Int’l (GSM) mode and you dial 911, then
press
,thepromptMakeemergencycall?appearsin
the display.
• If you press the left soft key (
emergency number 112 or 999.
) Yes, your phone dials the
• If you press the right soft key (
) No, the call is
discontinued and your phone returns to standby mode.
Note: If you dial 112 or 999 while in Int’l (GSM) mode, your phone dials the
emergency number immediately (no prompt).
Voice Privacy
Note: This feature is only available on the Verizon Wireless network.
Voice Privacy (at the Enhanced setting) allows you to
prevent those you call from seeing your number in their
display when receiving your call. Voice privacy options
are Standard and Enhanced.
1. In standby mode, press the left soft key (
) Menu,
then press (Settings), (Security). You’re
prompted to enter the lock code. The default lock code is
the last four digits of your telephone number.
2. Enter the lock code. Several Security sub menus appear
in the display.
3. Press
appear in the display.
4. Use the navigation key to highlight the Voice Privacy
(Voice Privacy). Standard and Enhanced
option of your choice, then press
saved.
. Your settings are
Section 8: Changing Your Settings
125
Restriction(CDMA Only)
Note: This feature is currently unavailable outside of the United States.
Restriction allows you to restrict outgoing and incoming
calls. You can also restrict access to your Phonebook.
1. In standby mode, press the left soft key (
) Menu,
then press (Settings), (Security). You’re
prompted to enter the lock code. The default lock code is
the last four digits of your telephone number.
2. Enter the lock code, then press
3. Use the navigation key to select Outgoing, Incoming, or
Phonebook, then press
(Restriction).
.
4. Use the navigation key to highlight On or Off, then press
. Your settings are saved.
Delete Memory
Use Delete Memory to free up memory in your phone by
deleting such things as media, messages, and entries in
your Phonebook from one convenient location.
Note: Marking and deleting any of the memory types does not delete the
memory type, only content within the type (such as messages or call logs).
1. In standby mode, press the left soft key (
) Menu,
then press (Settings), (Security). You’re
prompted to enter the lock code. The default lock code is
the last four digits of your telephone number.
2. Enter the lock code, then press
(Delete Memory).
The following memory types appear in the display.
126
Security Settings
• Phonebook
• Recent Calls
• Messages
• Multimedia
• Planner
• Voice Kit
3. Use the navigation key to highlight the memory type that
you wish to mark for deletion, then press the left soft key
(
) Mark or press the right soft key (
) Back to
return to the selection list.
4. Continue to highlight and mark as many memory types
for deletion as desired.
5. Press (
You’re prompted for confirmation.
6. Press the left soft key ( ) Yes to delete the marked
) Del to delete the selected memory types.
memory types or press the right soft key (
return to the selection list.
) No to
Reset phone
Reset Phone returns all setup options to their factory
default.
1. In standby mode, press the left soft key (
) Menu.
2. Press (Settings),
(Security). You’re
prompted to enter the lock code.
3. Enter the lock code, the press
(Reset Phone). A
prompt appears in the display asking if you want to
restore default settings (except for the Phonebook and
Voice Dial).
Section 8: Changing Your Settings
127
PIN Menu
Note: PIN is an acronym for Personal Identity Number. The PIN number
accompanies your SIM card, which is provided by Verizon Wireless.
The PIN code protects the SIM card and phone from
unauthorized access. The PIN code can be 4-8 digits in
length. After three successive incorrect entries the PIN
codeisblockedandyou’llbeaskedtoenterthePUKcode.
PIN Check
WithPINCheckenabled,yourphonerequestsentryofthe
PIN1 code upon power-up. The PIN1 code is assigned to
your SIM card by Verizon Wireless.
1. In standby mode, press the left soft key (
) Menu,
then press (Settings), (Security). You’re
prompted to enter the Lock Code. The default Lock Code
is the last four digits of your telephone number.
2. Enter the Lock Code. Several Security sub menus appear
in the display.
3. Press
(PIN Menu). The PIN Menu opens with PIN
Check highlighted.
4. Press
. Enable and Disable appear in the display.
5. Use the navigation key to highlight Enable or Disable,
then press . You’re prompted to enter the PIN1 code.
6. Enter the PIN1 code, then press
. A confirmation
message appears in the display.
128
Location Settings
Note: If you enabled PIN Check, the next time you reset your phone
(power-down, then power-up), you’ll be prompted for the PIN1 code. If you
do not have the PIN1 code, you can only place emergency calls.
Change PIN
Use the Change PIN sub menu to change the 4 to 8 digit
PIN code assigned to your SIM card by Verizon Wireless.
1. In standby mode, press the left soft key (
) Menu,
then press (Settings), (Security). You’re
prompted to enter the Lock code, which by default is the
last four digits of your phone number.
2. Enter the Lock Code for your phone, and press
(PIN Menu).
3. Use the navigation key to highlight Change PIN, then
press
.
4. Enter the current PIN code, then press
. You’re
prompted to enter a new PIN code.
5. Enter the new PIN code, then press
. You’re
prompted to enter the new PIN code again for
confirmation.
6. Enter the new PIN code, then press
. You’re returned
to the Security sub menu.
Location Settings
Note: This feature is only available on the Verizon Wireless network.
Section 8: Changing Your Settings
129
The Location (GPS) setting identifies your location to the
network. You can fully enable this setting or set GPS to
work only in the case that you dial 911 from your phone.
1. In standby mode, press the left soft key (
then press (Settings), (Location). The
settings listed in the display
) Menu,
• Location On: GPS location setting is on wherever the feature
is available.
• 911 Only: GPS location setting is on whenever you dial 911
only.
2. Use the navigation key to highlight an option.
3. Press
to select the highlighted setting.
130
Changing Message Settings
Phone Info
ThePhoneInfosubmenuallowsyoutoviewthesoftware
and hardware information for your phone.
1. In standby mode, press the left soft key (
) Menu,
then press (Settings), (Phone Info). The
software and hardware information for your phone
appears in the display.
Changing Message Settings
The Msg Setting sub menu allows you to define default
settings for all message types.
Text Msg Setting
1. In standby mode, press the left soft key (
) Menu,
then press (Messages), (Msg Setting),
(Text Msg Setting). The options listed in the
following table appear in the display.
• Quick Text: View and edit any of the pre-composed
messages in your Quick Text list.
• Save In Outbox: Set the default method for saving (or not
saving) messages to your Outbox
• Insert Signature: Insert a signature into all outgoing text
messages. You also have the option to create a signature.
• Auto Play: Set media within messages to automatically play
upon reception, or prompt before playing.
• Direct View: Turn Direct View on or off. Direct View
immediately displays the content of a message as it is
received.
2. Use the navigation key to highlight the desired setting.
Press
to perform the function for the highlighted
option or to enter its sub menu.
Section 8: Changing Your Settings
131
Pix Msg Setting
Note: This feature is currently unavailable outside of the United States.
1. In standby mode, press the left soft key (
then press (Messages), (Msg Setting),
(Pix Msg Setting). The options listed in the
following.
) Menu,
• Quick Text: View and edit any of the pre-composed
messages in your Quick Text list.
• Save In Outbox: Set the default method for saving (or not
saving) messages to your Outbox.
• Delivery Ack: Set your phone to alert you when
messages are delivered (delivery acknowledgement may
not be available on all networks).
• Retrieval Mode: Set your phone to retrieve (download) a
Pix Msg automatically or prompt you for retrieval.
2. Use the navigation key to highlight the desired setting.
Press
to perform the function for the highlighted
option or to enter its sub menu.
Entry Mode
UseEntryModetoselectthedefaultmethodoftextentry.
1. In standby mode, press the left soft key ( ) Menu,
then press (Messages), (Msg Setting),
(Entry Mode). The options listed in the following
table appear in the display.
• Alphabet: Enter text into messages using multiple
keypresses.
• T9 Word: Enter text into messages using T9 Word.
132
Changing Message Settings
2. Use the navigation key to highlight the default method of
text entry, then press
. Your settings are saved.
Callback #
Use Callback # to view or modify the callback #. The
Callback # can be inserted into all outgoing messages,
thereby notifying the recipient(s) of your phone number.
Note: This feature is network dependent. GSM networks may not have this
service. Also, functionality is dependent upon whether or not Caller ID is
enabled on your phone and may not be available in all areas.
1. In standby mode, press the left soft key (
then press (Messages), (Msg Setting),
(Callback #). The callback # appears in the
display.
2. Use the CLR key (
) Menu,
) to backspace and delete
numbers. Press and hold CLR (
characters from the display.
OR
) to delete all
Press the right soft key (
) Back to exit the callback
# display without making changes.
3. Enter a new callback # number using the keypad, then
press
to save your changes.
Section 8: Changing Your Settings
133
Auto Delete
Use Auto Delete to set the disposal method of messages
after they are read.
In standby mode, press the left soft key (
) Menu,
1.
then
press
(Messages),
(Msg Setting),
(Auto Delete). The options listed in the following
table appear in the display.
• Auto Delete: If memory is full, the first message received
after the memory becomes full is automatically deleted
• Not Delete: Do not delete messages after they are read
2. Use the navigation key to highlight the desired option.
3. Press to select the highlighted option. Your changes
are saved.
Voice Mail #
Use Voice Mail # to view or modify your voice mail
number.
1. In standby mode, press the left soft key (
then press (Messages), (Msg Setting),
(Voice Mail #). *86 appears in the display.
2. Use the CLR key ( ) to backspace and delete
numbers. Press and hold CLR (
) Menu,
) to delete all
characters from the display.
OR
Press the right soft key (
) Back to exit the voice
mail # display without making changes.
3. Insert a pause into a voice mail number (CDMA Only)
134
Call Options
4. While viewing the voice mail number, press the left soft
key (
) Option to display a pop-up menu with the
options listed in the following table
• P Pause: Insert a “hard” pause into the dialing string. The
phone waits for input from you before dialing resumes.
• T Pause: Inserts a short, 2 second pause into the dialing
string. The phone pauses for 2 seconds before dialing
resumes.
5. Press
. Your changes are saved.
Call Options
Call Options allows you to select the method for
answering incoming calls, setting redial options, setting
data rates for data calls, and more.
Answer options
AnswerOptionscontainsthesubmenusCallAnswerand
Auto Answer. Call Answer allows you to select the
method for answering incoming calls, while Auto
Answer allows you to select the delay time before a call is
picked up.
Call Answer
1. In standby mode, press the left soft key (
then press (Settings), (Call Options),
(Answer Options). The following options appear
in the display.
) Menu,
• Call Answer
• Auto Answer
2. Press
(Call Answer). The following options
appear in the display.
Section 8: Changing Your Settings
135
• Send Key
• Folder Open
• Any Key
3. Use the navigation key to highlight the method you wish
to use for answering calls, then press
.
Auto Answer
This feature is active when the supplied headset is
plugged into the headset jack. If you wish to have calls
answered automatically, use Auto Answer to select the
delay time before a call is picked up.
1. In standby mode, press the left soft key (
then press (Settings), (Call Options),
(Answer Options). Call Answer and Auto Answer
appear in the display.
2. Press (Auto Answer).
) Menu,
3. Use the navigation key to highlight on of the following
options
• Off
• After 1 Sec
• After 3 Sec
• After 5 Sec
4. Press
to select the highlighted option, or press
to return to the Answer Options sub menu without
making a selection.
Auto Retry(CDMA Only)
Auto Retry automatically redials busy numbers after a
preset period of time.
1. In standby mode, press the left soft key (
) Menu,
136
Call Options
then press
(Settings),
(Call Options),
(Auto Retry).
2. Use the navigation key to highlight one of the following
options
• Off
• After 10 Sec
• After 30 Sec
• After 60 Sec
3. Press
to select the option, or press
to return
to the Call Options sub menu without making a selection.
Data
Note: Only available within Verizon Wireless Enhanced Services Area.
Use the Data sub menu to set the baud rate for data calls
and when data mode is to be used.
Note: The Data feature does not function while the phone is in Int’l (GSM)
mode.
1. In standby mode, press the left soft key (
2. Press (Settings), (Call Options),
(Data) to display the Data sub menus listed.
) Menu.
• Auto Detect: Select when your phone uses data mode.
• Baud Rate: Selects the rate of data transfer for data calls.
Configure Auto Detect
1. Select the Data sub menu, and press
(Auto
Detect).
Section 8: Changing Your Settings
137
2. Use the navigation key to highlight Data For Next Call or
Data Until Powered Off, then press
. Select Data
Off or press
to return to the Data sub menu
without configuring Auto Detect.
Select the Baud Rate
1. Select the Data sub menu, and press
(Baud
Rate).
2. Use the navigation key to highlight Auto, 19200, 38400,
57600, 115200, or 230400, then press . Press
if your wish to return to the Data sub menu
without selecting the baud rate.
Ringer Settings
1. In standby mode, repeatedly press the volume key ( )
on the left side of the phone up or down. Options are:
• Silent
• 1Beep
• Vibrate
• Level 1
• Level 2
• Level 3
• Level 4
• Level 5
• Vib+Ring
2. Press
to save the setting. The phone returns to
standby mode.
138
Resetting Your Phone
Resetting Your Phone
Reset Phone returns all setup options to their factory
default.
1. In standby mode, press the left soft key (
) Menu,
then press
(Settings),
(Security). You’re
prompted to enter the lock code.
2. Enter the lock code, press
(Reset Phone). A
prompt appears in the display asking if you wish to
restore default settings (except for the Phonebook and
Voice Dial).
3. Press the left soft key (
press the right soft key (
Security list.
) Yes to Reset Phone or
) No to return to the
GSM Services
These menu items are supported only when you are
operating on a GSM network.
Call Diverting (GSM Only)
CallDivertingallowsyoutoselectfromuptofouroptions
(or conditions) to forward your calls to another number.
Call Diverting is Call Forwarding when you are in GSM
mode. The codes you use on VZW network will not work
on GSM networks.
Note: Diverted calls incur airtime charges.
1. In standby mode, press the left soft key (
) Menu,
then
press
(Settings),
(GSM Services).
Call Diverting is highlighted.
Section 8: Changing Your Settings
139
2. Press
. The sub menus listed appear in the display.
• Divert Always: Forward all calls to the specified number.
When roaming off the Verizon Wireless Network, availability of
this feature varies by service provider and may be limited or
restricted in some areas
• Busy: Forward calls to the specified number only when busy.
When roaming off the Verizon Wireless Network, availability of
this feature varies by service provider and may be limited or
restricted in some areas
• No Reply: Forward calls to the specified number when there
is no reply. When roaming off the Verizon Wireless Network,
availability of this feature varies by service provider and may be
limited or restricted in some areas
• Unreachable: Forward calls to the specified number when
unreachable. This feature is not supported at this time.
• Cancel All: Cancel all call forwarding. When roaming off the
Verizon Wireless Network, availability of this feature varies by
service provider and may be limited or restricted in some areas.
3. Use the navigation key to highlight the desired call
diverting option, then press
.
4. Follow the on-screen instructions to complete the
desired Call Diverting request.
Call Barring (GSM Only)
Note: This feature is not supported at this time.
Call Barring allows you to restrict specific types of
incomingandoutgoingcallsforyourphone.Thisisuseful
ifyouallowsomeonetouseyourphoneforashortperiod
of time.
140
GSM Services
1. In standby mode, press the left soft key (
then press (Settings),
Call Diverting is highlighted.
2. Use the navigation key to highlight Call Barring, then
press . The sub menus in the following table appear
) Menu,
(GSM Services).
in the display.
• All Outgoing: Disable all outgoing calls.
• Internatioinal: Disable International calls only.
• Iternational Except To Home: Disable International calls,
except those calls to your home.
• All Incoming: Disable all incoming calls.
• In While Abroad: Disable all international calls while out of
your home service area.
• Cancel All: Cancel all Call Barring.
• Change Password: changes password
3. Use the navigation key to highlight the sub menu you
wish to activate, then press
.
4. Follow the on-screen instructions to complete the
selected sub menu function.
Call Waiting (GSM Only)
Call Waiting notifies you of an incoming call even while
you’re in a call. You can then accept, reject, or ignore the
incoming call. Unlike Call Waiting in Verizon (CDMA)
mode, Call Waiting in GSM mode must first be activated.
Note: When roaming off the Verizon Wireless Network, availability of this
feature varies by service provider and may be limited or restricted in some
areas.
Section 8: Changing Your Settings
141
1. In standby mode, press the left soft key (
) Menu,
then press
(Settings),
(GSM Services).
Call Diverting is highlighted.
2. Highlight Call Waiting, then press
3. Highlight Activate, then press
.
.
Select Network (GSM Only)
This feature allows you to manually select the GSM
carrier.
Note: Selecting any option other than Automatic could result in different or
higher airtime charges.
1. In standby mode, press the left soft key (
then press (Settings), (GSM Services).
Call Diverting is highlighted.
2. Use the navigation key to highlight Select Network, then
) Menu,
press
. Automatic and Manual appear in the
display.
3. Use the navigation key to select manual or automatic
network selection, then press
saved.
. Your settings are
Caller ID (GSM Only)
Note: This feature is not supported at this time
Caller ID displays the number (and name, if in your
Phonebook) of incoming calls. Unlike Verizon (CDMA)
mode, Caller ID in GSM mode must be enabled by the
user.
142
GSM Services
1. In standby mode, press the left soft key (
then press (Settings),
Call Diverting is highlighted.
) Menu,
(GSM Services).
2. Use the navigation key to highlight Caller ID, then press
.
3. Use the navigation key to select Default, Hide Number,
or Send Number, then press
.
Closed User Group (CUG) (GSM Only)
Note: This feature is not supported at this time.
Closed User Groups area GSM servicethat specifies who
you can call and who can call you. Typical advantages of
Closed User Groups are their cost effectiveness and
security. You may subscribe to up to 10 Closed User
Groups.
The Closed User Group subscriptions listed in the
followingtablearegenerallyavailablethroughyourGSM
Service Provider.
• CUG Call Only: Calls are only permitted to others within your
Closed User Group.
• CUG With Incoming Access: Can receive calls from
others outside of the Closed User Group.
• CUG With Outgoing Access: Can place calls to others
outside of the Closed User Group.
• CUG with Incoming and Outgoing Access: Can place
and receive calls outside of the Closed User Group.
Section 8: Changing Your Settings
143
CUG Activation
Note: GSM service is required before you can activate a Closed User Group.
1. In standby mode, press the left soft key (
then press (Settings), (GSM Services),
(Closed User Group). The options appear in the
display.
) Menu,
• Index List: Allows you to enter a Closed User Group, which
can then be activated.
• Outside Access:Turn Outside Access on or off. Outside
access allows you to place calls to people outside of the
Closed User Group.
• Default Group: Turn the network default Closed User Group
on or off.
• Deactivate: Deactivates the currently active Closed User
Group.
2. Use the navigation keys to highlight the desired option.
3. Press
to open the highlighted option and make
changes as desired.
144
Section 9: Multimedia
Topics Covered
• Multimedia
• Receiving Pictures
• Sending Pictures
This section allows you send and receive images taken
with your phones built in digital camera. There are
several options associated with the camera to allow you
to capture crisp, clear images.
Section 9: Multimedia
145
Multimedia
Media of all types are stored in the Multimedia. You can
also view memory info for Multimedia to see how much
space you’ve used (and have left) for stored media
1. In standby mode, press the left soft key (
) Menu,
then press
(Multimedia). These sub menus
appear in the display.
• Image Gallery: Contains Preloaded images (those that
came with the phone). The My Image folder is used to store
those images that you’ve downloaded.
• Sounds: Browse sounds preloaded on your phone or those
that you’ve downloaded using Get It Now.
• Pix Template: View your list of Pix Templates for several
different occasions such as birthdays, well wishes, and more.
• Animelody Gallery: View your list of animated melodies
that you’ve downloaded using Get It Now.
• Memory Info: View memory information for the Image
Gallery, Photo Gallery, and Total used.
• Delete All: Delete images, sounds, animelodies, or photos
from any folder of the media gallery.
2. Use the up/down keys to highlight a sub menu or item.
Press
to enter the sub menu.
View the Image Gallery in thumbnails
1. Browse the photo or image galleries using any of the four
navigation keys.
2. Press the right soft key (
) Expand to view pictures
full screen.
146
Sending Pix Messages
3. Press the left soft key (
) Options, These sub menus
display.
• Mark: mark image
• Set Wallpaper: you can select a background image to be
displayed on the idle screen
• Delete: Deletes the image being displayed.
• Delete All: Delete images, sounds, animelodies, or photos
from any folder of the media gallery.
Sending Pix Messages
Note: Only available within Verizon Wireless Enhanced Services Area.
You can add sounds and attach a V-card or Phonebook
entry to your Pix Msg. This is also known as Multimedia
Messaging (MMS).
1. In standby mode, press the left soft key (
then press (Messages),
) Menu,
(New Pix Msg).
2. Enter the phone number or e-mail address of the
recipient (or recipients) using the keypad.
3. Press the left soft key (
) Option to display a pop-up
menu that provides options for changing text entry
modes, entering a domain suffix for an e-mail address,
and to CC/BCC recipients.
Note: CC and BCC are acronyms for Carbon Copy and Blind Carbon Copy.
Use CC to copy recipients normally. Use BCC to copy recipients that you
don’t wish others in the list to see.
Section 9: Multimedia
147
Note: You can send a Pix Msg to up to ten recipients. Separate each
recipient’s address or phone number with a space in the Send to field of
the Pix Msg composer.
4. Press
once you’ve finished entering the number or
e-mail address of the recipients in the To, CC, or
BCC fields. The Pix Msg composer appears in the display
with the Add Message field highlighted.
5. Press the right navigation key to add a message.
6. Compose your message, then press
. You’re
returned to the Pix Msg composer.
7. Press the down navigation key. Add Sound is
highlighted.
8. Press the right navigation key to add a sound to your
message.
9. Use the navigation key to highlight the type of sound you
wish to insert into your message, then press
10. Browse available sounds using the navigation key, then
press . You’re returned to the Pix Msg composer.
.
11. Press the down navigation key. Add Image is
highlighted.
12. Press the right navigation key to browse available
images. Use the navigation and
keys to highlight
and select available images, or to take a picture.
13. Press the down navigation key once to highlight the Add
Subject field.
148
Receiving a Pix Messges
14. Press the right navigation key to display the Subject
composer.
15. Enter a subject using the keypad, then press
. You’re
returned to the Pix Msg composer.
16. Press the down navigation key until Attach is
highlighted, then press the right navigation key. A pop-
up menu appears in the display.
17. Press
press
to insert a name card (if one exists), or
to insert an entry from your Phonebook.
At the Pix Msg composer, press
to send the
message to the intended recipient(s).
Receiving a Pix Messges
WhenyoureceiveanewPixMsg, PixMsgappearsinthe
displayalongwiththeoptionsReject,Down,andLater.To
reject, download, orviewthePixMsglaterontheVerizon
Wireless website, review the instructions for each in the
sections that follow.
Note: For the options to Reject, Down, and Later to appear in the display
when you receive a Pix Msg, retrieval mode must be set to Prompt instead
of Automatic in the Message Settings sub menu.
1. When you receive a new Pix Msg, press
(Down).
Downloading... appears in the display.
2. After downloading, the image (and text if any) contained
in the Pix Msg appear in the display.
3. Use the navigation keys to scroll through the message or
view the entire picture if necessary.
Section 9: Multimedia
149
Receive messages while in a call
When you receive a message while in a call, the New
Messagedialogboxappearsinthedisplayalongwiththe
closed envelope icon ( ). You can view the message
without disconnecting your call.
1. Press the left soft key (
) Ignore to ignore the
message. The message is saved to your inbox where you
can view it later.
2. Press the right soft key (
message, your call remains connected.
Reject a Pix Msg
) View to open the
Note: This feature is currently unavailable outside of the United States.
1. When you receive a new Pix Msg, press the left soft key
(
) Reject. You’re prompted for a confirmation.
2. Press the left soft key (
) Yes, and the message is
rejected.
Note: If you select No, you’re returned you to the previous menu
Retrieving a Pix Msg
Note: Only available within Verizon Wireless Enhanced Services Area.
1. When you receive a new Pix Msg, press
(Down).
Downloading... appears in the display.
2. After downloading, the image (and text if any) contained
in the Pix Msg appear in the display.
150
Retrieving a Pix Msg
3. Use the navigation keys to scroll through the message or
view the entire picture if necessary.
View a Pix Msg later (online)
Note: Only available within Verizon Wireless Enhanced Services Area.
1. When you receive a new Pix Msg, press the right soft key
(
) Later.
2. To view the message, press the left soft key (
Menu,
)
.
then press
(Messages),
(Inbox)
3. Use the navigation key to highlight the unopened
message, then press . Specific directions for
viewing the picture online at the Verizon Wireless
website appear in the display.
Section 9: Multimedia
151
152
Planner
Planner is a suite of PIM (Personal Information
Management)applicationssuchasaCalendar,ToDoList,
and Memo Pad. Schedule events, set reminders, create to
do lists, perform calculations, and more with the digital
assistant functionality of this useful feature.
Note: While in GSM mode, your phone’s clock is not updated automatically.
If you change time zones, make sure you update your phone’s clock in the
Planner menu.
1. In standby mode, press the left soft key (
) Menu,
then press (Planner). The Planner menu opens
and the applications listed in the following table appear
in the display.
• Calendar: Schedule events for any day by indicating each
event’s start and end time.
• To Do List: Enter up to 50 tasks and set an alarm for each.
• Alarm Clock: Set an alarm for any day and time. The alarm
can be set to activate even if the phone is off.
• Time/Date: Set the system time and date.
• Memo Pad: Enter a memo, which can be viewed at any time.
Memos do not have an alarm setting.
• World Time: Set the local time and the time for one other
time zone anywhere in the world.
• Calculator: Use the calculator to perform numeric
calculations
2. Use the navigation key to highlight an application. Press
to enter the highlighted application’s sub menu. The
following sections provide a detailed description on each
application and its function.
154
Planner
Time/Date (CDMA mode)
Use the Time/Date function in CDMA mode to set your
phone’s date format.
Note: This is primarily a GSM function. Only the date format can be
changed in CDMA mode. The time and date can only be changed while in
GSM mode.
1. In standby mode, press the left soft key (
) Menu,
then press (Planner), (Time/Date).
2. Use the left/right navigation keys to select the date
format.
3. Press
to save your settings.
Time/Date (GSM mode)
Use the Time/Date function in GSM mode to set your
phone’s time, date, and date format.
1. In standby mode, press the left soft key (
) Menu,
then press (Planner), (Time/Date). The
Time/Date settings screen appears in the display.
2. Enter the time using the keypad, then press the down
navigation key to highlight the AM/PM field.
3. Use the left/right navigation keys to select AM or PM.,
then press the down navigation key to highlight the Date
field.
4. Enter the date using the keypad, then press the down
navigation key to highlight the Date Format field.
5. Use the left/right navigation keys to select the desired
date format, then press
to save your settings.
Section 10: Organizer
155
Memo Pad
Create and store notes in Memo Pad. You can’t prioritize
or set an alert for stored notes. Return to Memo Pad
anytime to review and edit your notes.
1. In standby mode, press the left soft key (
) Menu,
then press (Planner), (Memo Pad).
2. If you have any stored memos, they appear as a list in
the display. If this is your first time in Memo Pad, you’re
prompted to add a new memo.
3. To add a new memo, press the left soft key (
) New,
then enter the memo using the keypad.
4. While entering a memo, press the left soft key (
)
Option to display a pop-up menu with the following text
entry modes.
• ABC
• Symbol
• 123
• T9 Word
5. Use the left/right navigation keys to select the other
available text entry modes of 123, T9 Word, and Symbol,
or press
6. When you’re finished entering details for the memo,
press . The memo is saved.
to exit the pop-up menu.
Review, add, edit, and erase memos
1. In standby mode, press the left soft key (
) Menu,
then press
(Planner),
(Memo Pad). If you
have any stored memos, they appear as a list in the
156
World Time
display.
2. With a memo highlighted, press the left soft key (
Option. A pop-up menu with the options listed in the
following table appears in the display
)
• New Memo: Add a new memo to Memo Pad
• Edit: Edit the memo currently highlighted or appearing in the
display.
• Delete: Erase the memo currently highlighted or appearing in
the display.
• Mark & Delete: Mark and then delete selected memos. This
option only appears if you have more than one memo stored.
• Delete All: Erase all memo’s
3. Use the navigation key to highlight an option or press
to exit the pop-up menu.
4. Press
to perform the highlighted option’s function.
World Time
WorldTimeallowsyoutoviewthetimeofdayornightin
any part of the world.
1. In standby mode, press the left soft key (
then press (Planner), (World Time). A
world map appears in the display.
) Menu,
2. Use the navigation key to display the city (or cities), date,
and time that you wish to view. The following cities are
supported.
• Alaska
• San Francisco
• Denver
• Chicago/Mexico
Section 10: Organizer
157
• New York
• Caracas
• Brasilia
• Mid Atlantic
• Cape Verde
• London
• Paris, Berlin
• Athens, Helsinki
• Moscow
• Abu Dhabi
• Tashkent
• Alma-ata
• Bangkok/Jakarta
• Hong Kong/Beijing
• Seoul/Tokyo
• Guam/Sydney
• Okhotsk
• Wellington
• Samoa/Midway
• Honolulu, Hawaii
Setting Daylight Savings Time (DST)
If you use the Dual Clock World Time wallpaper for your
display, you must set Daylight Savings Time (DST)
indicators for your Home and Visiting Areas, as
appropriate.
Note: To select the Dual Clock World Time as your display wallpaper, refer
158
Calendar
Setting Home and Visiting Areas DST
To enable DST for Home or Visiting areas, follow these
steps:
1. In standby mode, press the left soft key (
then press (Planner), (World Time). A
world map appears in the display.
2. Use the navigation key to select your home are visiting
) Menu,
area, then press the left soft key (
popup menu displays.
) Set Dst. A
3. Use the navigation key to select On, then press
Daylight Savings Time is enabled for the area you
selected.
.
.
4. Use the navigation key to select On, then press
Daylight Savings Time is enabled.
5. Press
to return to standby mode.
Calendar
Schedule up to eight events for any day by indicating
each event’s start and end time. Set alarms for events so
thatyoucanbealertedbeforeaneventtakesplace.Events
scheduledforfuturedatesautomaticallyappearonyour
Today events schedule for the present day.
Add a new event
1. In standby mode, press the left soft key (
) Menu,
then press (Planner), (Calendar). The
calendar appears in the display with the current date
highlighted.
Section 10: Organizer
159
2. Press the left soft key (
) Option. A pop-up menu
appears in the display that contains the menu items .
• New Event: Schedule a new event.
• Week View: View the current week.
• Go To Date: Go to any date that you specify.
• Go to Today: View today’s events.
• Del Past Events: Select a past event to delete.
• Delete All Events: Delete all events in your calendar
3. With New Event highlighted, press
. The New Event
screen appears in the display with the fields contained
below.
• Subject: Select from nine subjects to describe the event.
• Start Date: Enter the start date for the event.
• Start Time: Enter the start time for the event.
• AM/PM/24 Hours: Select from A.M. or P.M. for the start
time.
• End Date: Enter the end date for the event.
• End Time: Enter the end time for the event.
• AM/PM/24 Hours: Select from A.M. or P.M for the end
time.
• Occurs: Select the frequency of the event.
• Alarm: Turn the alarm for the event on or off.
• Reminder: Set a reminder up to one day before the event.
• Melody: Select a melody for when you’re alerted of the event.
• Memo: Enter a description of the event.
4. Fill in and select event details using the navigation keys
and the alpha-numeric keypad.
5. Press
. The event is saved.
160
Calendar
View an event
1. In standby mode, press the left soft key (
then press (Planner), (Calendar).
) Menu,
2. A calendar appears in the display with the current date
highlighted.
3. Use the navigation keys to highlight the date containing
the event that you wish to view. If the event date is in
another month, press the left soft key (
) Option.
Tip: Use the volume key to move between months in the calendar.
4. In the pop-up menu that appears in the display, use the
navigation key to highlight Go To Date, then press
.
5. Enter the desired date in the box at the bottom of the
display, then press
appears in the display with the event date highlighted.
6. Press to view event details for the date.
7. Press the left soft key (
. The month that you entered
) Option. A pop-up menu
appears in the display.
8. To edit the event, press
9. To enter a new event, press
.
.
10. To move the event to another date, press
.
11. To delete the current event, press
.
12. To delete the day’s events, press
.
13. In Calendar view, press the volume up key to view
previous months.
Section 10: Organizer
161
14. In Calendar view, press the volume down key to view
future months.
To-Do List
TheToDoListallowsyoutocreateatasklistinwhichyou
canstore,prioritize, andmanageupto50ToDoListtasks.
1. In standby mode, press the left soft key (
then press (Planner), (To Do List).
2. Press the left soft key ( ) New.
3. Enter details of the task using the keypad. Press the left
soft key ( ) Option to display a pop-up menu.
) Menu,
4. Use the left/right navigation key to display the text entry
mode options ABC, Symbol, 123, and T9 Word
5. Once the desired text entry mode appears in the pop-up
menu, press
6. When finished, press
Add, Edit, and Erase To-Do List tasks
1. In standby mode, press the left soft key (
then press (Planner), (To Do List).
, or press
to exit the menu.
to save the task.
) Menu,
2. Use the navigation key to browse tasks in your To Do
List. Events are presented in order of date, then priority.
3. Press the left soft key (
) Option. The options listed
in the following table appear in the display.
• New To Do:Add a new task to the To Do List.
• Edit: Edit the task currently appearing in the display.
• Delete:Erase the highlighted task.
• Mark & Delete: Mark and erase multiple tasks
162
Alarm
• Delete All: Erase all To Do task.
4. Use the navigation key to highlight an option, press
to perform the function for the highlighted option.
Alarm
Note: Your clock is not updated automatically while in GSM mode. Make
sure to check/change clock settings when traveling abroad.
Your phone has an alarm clock that can be set to go off
once, or recur daily at a specific time. Once set, the alarm
clock is easy to change or turn off.
Set An Alarm
1. In standby mode, press the left soft key (
) Menu,
then press (Planner), (Alarm Clock). The
following options appear in the display
• Alarm 01
• Alarm 02
• Alarm 03
• Alarm 04
2. Use the navigation key to highlight the alarm that you
wish to enable, then press
appears in the display.
. The Edit Alarm screen
3. Enter a title for the alarm in the Title field.
4. Press the down navigation key once to highlight the Time
field, then enter the time that you wish for the alarm to
sound.
5. Press the down navigation key once to highlight the AM/
PM field.
Section 10: Organizer
163
6. Use the left/right navigation keys to select AM or PM or
24 Hours.
7. Press the down navigation key once to highlight the Day
field.
8. Use the left/right navigation keys to set the frequency
(occurrence) of the alarm. Below lists and defines the
options for this field.
• Once: The alarm sounds only once, at the time specified.
• Daily: The alarm sounds every day at the time specified.
• Mon-Fri: The alarm sounds Monday through Friday at the
time specified.
• Mon-Sat: The alarm sounds Monday through Saturday at the
time specified.
9. Press the down navigation key once to highlight the Set
field. This is where the alarm is turned on or off.
10. Use the left/right navigation keys to select On or Off.
11. Press the down navigation key once to highlight the
melody field. The melody field is where you can choose
the sound for the alarm.
12. Press the right navigation key. A pop-up menu appears
in the display with the options Preloaded and My Sounds.
13. Press
on your phone, or press
that you’ve downloaded to your phone.
to select from sounds that came preloaded
to select from sounds
14. Once you’ve selected a sound for the alarm, you’re
returned to the Edit Alarm screen.
15. Press
to save your settings
164
Alarm
Disable an alarm before it sounds
1. In standby mode, press the left soft key (
) Menu,
then press
(Planner),
(Alarm Clock). The
following options appear in the display.
• Alarm 01
• Alarm 02
• Alarm 03
• Alarm 04
2. Use the navigation key to highlight the alarm you wish to
disable, then press the left soft key (
pop-up menu appears in the display.
) Option. A
3. Press
to reset the highlighted alarm or press
to reset all alarms.
Snooze
When an alarm sounds, a menu screen displays that
allowsyoutoeitherturnthealarmoffortohavethealarm
ring again after 5 minutes. This is called Snooze.
To use this feature follow these steps:
1. Set one of your phone’s 4 alarms. For more information
about setting an alarm, see "Set An Alarm" on page
2. When an alarm sounds, press the left soft key (
)
Snooze to turn the alarm off and to set it to ring again
after 5 minutes. Or, to turn the alarm off completely,
press the right soft key (
) Stop. The alarm turns off
and the standby screen displays.
Section 10: Organizer
165
Calculator
You can perform calculations, including addition,
subtraction, multiplication and division using your
phone.
1. In standby mode, press the left soft key (
then press (Planner), (Calculator). The
Calculator appears in the display.
) Menu,
2. Enter the first number in your equation using the keypad.
(Numbers can be up to nine digits long.)
3. Press the left soft key (
) Option to display a pop-up
menu which allows you to enter a decimal point or
parenthesis.
4. Press
negative.
to change the sign for a number to a
5. Use the navigation key to set the type of calculation that
you wish to perform. Your choices are as follows.
• [+] Addition
• [-] Subtraction
• [x] Multiplication
• [÷] Division
6. Use the keypad to enter the second number into your
equation.
7. Press
to perform the calculation and view the result.
166
Section 11: Network Services
Topics Covered
• Call Forwarding
• Call Waiting
• Network Selection
• Caller ID
This section allows set up the network functions
supportedbyyourcarrier.Someoftheseservicesmaynot
be available due to coverage area or service plans. If you
haveanyquestions,pleasecontacttheCustomerSupport
center.
Section 11: Network Services
167
Call Forwarding
CallForwardingallowsyoutoforwardallyourincoming
call to another phone number, even when your phone is
turned off.
To activat call forwarding, follow these steps:
1. Press
.
2. Enter the area code and phone number where the
incoming calla are forwarded.
3. Press
. A confirmation recording confirms the
feature change.
Call Waiting
If you’re on a call, your phone beeps when another call is
incoming.ContactVerizonWirelessforavailabilityof this
feature.
1. Press
to connect and ask the calling party to
remain on the line.
2. Press
and the second caller is placed on hold and
you’re returned to the original caller. Press
alternate between calls.
to
Three-way Calling
Call two other numbers and connect them to your call
using Three-way calling.
1. In standby mode, dial the number for the first party in
your call and press
2. When connected, ask the other party to remain on the
line. Press to place them on hold.
.
168
Network Selection
3. Dial the second party’s phone number and press
.
4. When the second party answers, press
to
connect all three parties.
Network Selection
This feature allows you to manually select the GSM
carrier.
Note: Selecting any option other than Automatic could result in different or
higher airtime charges.
1. In standby mode, press the left soft key (
then press (Settings), (GSM Services).
Call Diverting is highlighted.
2. Use the navigation key to highlight Select Network, then
press . Automatic and Manual appear in the display.
) Menu,
3. Use the navigation key to select manual or automatic
network selection, then press
saved.
. Your settings are
Caller ID
Caller ID alerts you to who’s calling by displaying the
phone number of the person calling when you receive an
incoming call. If the caller’s name and number are
already stored in your Internal Phone Book, the
corresponding name appears with the number
• To block caller ID from displaying when you call another user,
press
and then dial the phone number.
Section 11: Network Services
169
170
Get It Now Options
Note: Only available within Verizon Wireless Enhanced Services Area.
With Get It Now, you can download full featured
applications such as games, personalized ring tones, and
pictures. You can also use it to send and receive instant
messages, email, or browse the web to catch up on all the
latest information.
Note: If you receive a call while using Get It Now, the application is put on
hold during the call. Once the call ends, your Get It Now session resumes
where you left off.
1. In standby mode, press the right navigation key to launch
the Get It Now application. The Shopping Cart icon
(
) appears highlighted in the display.
2. Press
(Start). After a brief pause, the Get it Now
options listed in the following table appear in the display.
• What’s New: Provides updates on the latest games,
information services, etc.
• Get Fun & Games: Select from a broad category of games
you can play on your phone. Also select from several fun and
interesting applications.
• Get Tones: Download your favorite ring tones.
• Get Going: Download applications that keep you in touch
with the world, keep you organized, and help you find the
coolest spots.
• Get Pix: View, share your own pictures and even save them
as your phone's wallpaper or screensaver.
• Get Messaging: Check e-mail on some of the most popular
clients on the Internet.
172
Get It Now Settings
• Aplicaciones en Espanol: Download Spanish
applications.
• Search: Enter a keyword and search the Get It Now
catalogue.
3. Use the navigation key to highlight the category of your
choice, then press
.
4. Select the application you wish to download and follow
the online directions.
Remove an application
You can remove applications to free up space for other
applications.
1. In standby mode, press the right navigation key to launch
the Get It Now application. Press the right navigation key
to highlight the Settings icon. Press the
2. Use the navigation key to highlight Manage Apps, then
press . Any applications that you’ve downloaded to
key.
your phone appear in the display.
3. Use the navigation key to highlight the application that
you wish to remove, then press
.
4. Highlight the Remove icon, then press
.
5. Highlight Yes, then press
. The application is
removed.
Get It Now Settings
Use the Settings sub menu within Get It Now to manage,
move, order applications, and more.
1. In standby mode, press the right navigation key to launch
Get It Now.
Section 12: Get It Now
173
2. At the Get It Now menu, use the navigation key to
highlight Settings, then press
. The options listed in
the following table appear in the display
• Order Apps: Download applications over the network.
• Move Apps: Move previously downloaded applications
between the Main Menu, Work, and Fun folders.
• Manage Apps: View System Info, Application List,
Properties for each application, and other options.
• Main Menu View: Select whether you wish to view the
main Get It Now menu in a list or icon format.
• Screen Savers: View downloaded screensavers.
• View Log: View the Get It Now log, which displays
information about recent activity using Get It Now.
3. Use the navigation key to highlight an option.
4. Press
to enter the option’s sub menu and view or
change settings.
Get It Now Help
The Help sub menu within Get It Now is a short tutorial
on several Get It Now features. View information about
charges,cancellingsubscriptions,buyingapps,disabling
apps, and more.
1. Within in the Get It Now menu, use the navigation key to
highlight the question mark ( ) icon.
2. Press
. The Help subjects listed in the following
sections appear in the display.
174
Get It Now Help
Buying New Apps
To buy new and exciting apps, visit the Get It Now Shop.
It provides you with a variety of apps you can choose
from.
What do I pay?
When you buy an app you will be charged for the
purchase cost of the app and the network connections to
download it. Charges will also apply when you use apps
that require network connections, such as downloading
information and sending text messages.
Charges
Charges will apply for network connections. A network
connectionisusedwhenyouarebrowsingtheGetitNow
Shop, downloading and restoring applications, or
canceling subscription applications. Charges will also
apply when you use applications that require network
connections, such as downloading information and
sending text messages.
Cancelling Subscription
1. To cancel a subscription to an app, choose Settings,
then Manage apps.
2. Select the app subscription you want to cancel.
Demo Apps
A Demo app is free and is designed to demonstrate the
app’s main features. It usually expires after a certain
period of time or a number of uses and often has limited
functions. When you run a demo app, you will be
Section 12: Get It Now
175
presented with a purchase option so you won’t have to
look for the app in the Get It Now Shop.
Removing Apps
You may remove apps that are no longer needed. When
youremoveanapp,youcannotusetheapplicationunless
you purchase it again.
1. To remove an app, choose Settings, then Manage
Apps.
2. Select the app you want to remove.
Disabled Apps
You can install new apps even if the memory of your
phone is full by partially removing (disabling) apps you
haven’t used recently. When you need to use a disabled
app, you can restore it at no additional purchase cost.
Restoring Apps
Disabled apps can be quickly restored at no additional
purchase cost. To restore an app, run the application you
want to restore from the Main Menu. You will be guided
through the restoration process.
Expired Apps
Appsthatwerepurchasedbasedonthenumberofusesor
for a specified period of time expire. You can purchase
additional uses from the Get It Now Shop.
176
Section 13: Mobile Web
Topics Covered
• Lanching Mobile Web
• Using Mobile Web
• How Mobile Web Keys Work
• Links
• Place a Call While Using Mobile Web
This section outlines how to launch Mobile Web, how to
navigate to other pages on the web, and how the keys on
the keypad are used with the web application.
Additionally, links to other sites are briefly discussed.
Section 13: Mobile Web
177
Lanching Mobile Web
1. In standby mode press the left navigation key.
for mor on the Navigation Key.
2. Use the navigation key to browse the categories.
3. Once the desired category is highlighted, press
to
enter the category list.
Using Mobile Web
Note: This feature is currently unavailable outside of theUnited States. Only
available within the Verizon Wireless Enhances Services Area.
When you use Mobile Web, some of the keys operate
differently than during a normal phone call.
Mobile Web presents on-screen items in any of the
following ways:
• Text or numeric input
• Links (embedded in content)
• Numbered options (some options may not be numbered)
• Simple text
You can utilize the options or links by using the soft keys.
178
How Mobile Web Keys Work
How Mobile Web Keys Work
The following table lists Mobile Web keys and functions
Navigation Key: Use the navigation key to browse
lists and highlight options.
CLR Key: A browser back-up key. Press once to back
up one page. Press and hold to go back to home page.
Press to clear the last number, letter, or symbol
entered. Press and hold to completely clear the
display.
Asterisk/Shift Key: Press before entering text to
enable upper case characters (in Abc mode).
0/Next Key: Press to enter a zero (0), or to display
another word in the dictionary when in T9 Word
entry mode.
Pound/Space Key: Press to insert a space when
entering text.
Numbers: Use the number keys to select items in a
menu if they are numbered.1 - 9.
END Key: Press to exit VZW with MSN and return
the phone to standby mode.
Left Soft Key: Press the left soft key to go to the
highlighted web link and/or perform the function
above it in the display.
Right Soft Key: The right soft key is the Menu key.
Press this key to display a pop-up menu with
several options.
Section 13: Mobile Web
179
SEND Key: Press to dial a highlighted number
Links
Note: This feature is currently unavailable outside of the United States.
Only available within the Verizon Wireless Enhances Services Area.
Links can serve several purposes, such as jumping to a
differentpage,toadifferentsite,orinitiatingaphonecall.
Linksareshowninsideofbrackets([ ]).Normally,theleft
soft key (
) is used to select a highlighted link.
Place a call while using Mobile Web
Note: This feature is currently unavailable outside of the United States.
Only available within the Verizon Wireless Enhances Services Area.
YoucanplaceacallwhileusingMobileWebifthewebsite
supportsthisfeature.Presstheappropriatesoftkeytocall
the number. In most cases you can also press
to call
the number. The Internet connection terminates when
you initiate the call. After you end the call, your phone
returns to standby mode.
180
Section 14: VZW with MSN
Topics Covered
• VZW with MSN
• Launching VZW with MSN
• Exit VZW with MSN
• Navigate the Web
• VZW with MSN soft keys
• LInks
• Place a call while using VZW with MSN
This section outlines the available gaming options and
accessories for your phone. For more information,
contact your service provider.
Section 14: VZW with MSN
181
VZW with MSN
Note: This feature is currently unavailable outside of the United States.
Only available within the Verizon Wireless Enhances Services Area.
VZW with MSN allows you to surf the web from your
wireless phone.
Each time you launch VZW with MSN, your phone
connectstotheInternetandtheserviceindicatoricon
(3G) or
(2G) appears in the display.
Note: If you receive a call while using VZW with MSN, the application is put
on hold during the call. Once the call ends, your VZW with MSN session
resumes where you left off. Only available within the Verizon Wireless
Enhances Services Area
Note: Any time the service indicator icon is visible, you are connected to
the Internet and billed accordingly. Rates and prices vary according to your
service contract. For further information on billing contact Verizon Wireless.
Only available within the Verizon Wireless Enhances Services Area
Launch VZW with MSN
Note: This feature is currently unavailable outside of the United States.
Only available within the Verizon Wireless Enhances Services Area.
1. In standby mode, press the left navigation key. VZW with
MSN and a list of categories (representing one or more
web sites) appears in the display.
2. Use the navigation key to browse the categories.
182
Exit VZW with MSN
3. Once the desired category is highlighted, press
to
enter the category list.
Exit VZW with MSN
ThisfeatureiscurrentlyunavailableoutsideoftheUnited
States. Only available within the Verizon Wireless
Enhances Services Area.
• Press
to exit VZW with MSN.
Navigate the Web
Note: This feature is currently unavailable outside of the United States.
Only available within the Verizon Wireless Enhances Services Area.
When you use VZW with MSN, some of the keys operate
differently than during a normal phone call.
VZW with MSN presents on-screen items in any of the
following ways:
• Text or numeric input
• Links (embedded in content)
• Numbered options (some options may not be numbered)
• Simple text
You can act on the options or links by using the soft keys.
VZW with MSN soft keys
Note: This feature is currently unavailable outside of the United States.
Only available within the Verizon Wireless Enhances Services Area.
Section 14: VZW with MSN
183
AtthebottomoftheVZWwithMSNdisplaycontainsthe
browser commands. The left ( ) and right ( ) soft
keys onthe keypadareused to performthe commandsin
the display. These are called “soft keys” because their
function changes depending where you are in the
application.
How VZW with MSN keys work
The following table lists VZW with MSN keys and
functions.
Navigation Key: Use the navigation key to browse
lists and highlight options.
CLR Key: A browser back-up key. Press once to back
up one page. Press and hold to go back to VZW with
MSN home page.
Press to clear the last number, letter, or symbol
entered. Press and hold to completely clear the
display.
Asterisk/Shift Key: Press before entering text to
enable upper case characters (in Abc mode).
0/Next Key: Press to enter a zero (0), or to display
another word in the dictionary when in T9 Word entry
mode.
Pound/Space Key: Press to insert a space when
entering text.
Numbers 1 - 9: Use the number keys to select items
in a menu if they are numbered.
184
Links
END Key: Press to exit VZW with MSN and return the
phone to standby mode.
Left Soft Key: Press the left soft key to go to the
highlighted web link and/or perform the function
above it in the display.
Right Soft Key: The right soft key is the Menu key.
Press this key to display a pop-up menu with several
options.
SEND Key: Press to dial a highlighted number.
Links
Note: This feature is currently unavailable outside of the United States.
Only available within the Verizon Wireless Enhances Services Area.
Links can serve several purposes, such as jumping to a
differentpage,toadifferentsite,orinitiatingaphonecall.
Links are shown inside of brackets ([ ]). Normally, the
left soft key (
) is used to select a highlighted link.
Place a call while using VZW with MSN
Note: This feature is currently unavailable outside of the United States.
Only available within the Verizon Wireless Enhances Services Area.
You can place a call while using VZW with MSN if the
website supports this feature. Press the appropriate soft
key to call the number. In most cases you can also press
to call the number. The Internet connection
terminates when you initiate the call. After you end the
call, your phone returns to standby mode.
Section 14: VZW with MSN
185
186
Section 15: Adapters
Topics Covered
• Adapters
This section details the use of adapters in respective
countries. For more information, contact your service
provider.
NOTE: THREE INTERNATIONAL POWER PLUG ADAPTERS HAVE BEEN
INCLUDED IN THIS BOX FOR YOUR CONVENIENCE. THESE ADAPTERS
INCLUDE THE UK POWER PLUG ADAPTER, THE AUSTRALIA POWER
PLUG ADAPTER AND THE EUROPEAN POWER PLUG ADAPTER. EACH
ADAPTER IS TO BE USED ONLY WITH EACH’S INTENDED COUNTRIES OF
USE, AS INDICATED BELOW. USE OF THE WRONG ADAPTER COULD
DAMAGE YOUR PHONE AND VOID YOUR WARRANTY.
Section 15: Adapters
187
Adapters
The following list provides the adapter and the countries
supported by each Adapter.
UK
TheUKPowerPlugAdaptercanbeusedinthefollowing
countries:
• Bahrain
• Bangladesh
• Botswana
• Brunei
• Cameroon
• Channel Islands
• China
• Cyprus
• Dominica
• El Salvador
• Gambia
• Ghana
• Gibraltar
• Grenada
• Guatemala
• Guyana
• Hong Kong
• Iraq
188
Adapters
• Ireland
• Isle of Man
• Jordan
• Kenya
• Kuwait
• Lebanon
• Macau
• Malawi
• Malaysia
• Maldives
• Malta
• Mauritius
• Myanmar
• Nigeria
• Oman
• Qatar
• St. Kitts-Nevis
• St. Lucia
• St. Vincent
• Saudi Arabia
• Seychelles
• Sierra Leone
• Singapore
• Tanzania
Section 15: Adapters
189
• Uganda
• United Arab Emirates
• United Kingdom
• Vietnam
• Yemen
• Zambia
• Zimbabwe
Australia
The Australia Power Plug Adapter can be used in the
following countries:
• American Samoa
• Argentina
• Australia
• China
• El Salvador
• Fiji
• Guatemala
• Kiribati
• Nauru
• New Zealand
• Okinawa
• Panama
• Papua New Guinea
• St. Vincent
190
Adapters
• Tajikistan
• Tonga
• Uruguay
European
The European Power Plug Adapter can be used in the
following countries:
• Austria
• Belgium
• Bosnia
• Croatia
• Cyprus
• Denmark
• Eastern Europe
• Finland
• Germany
• Greece
• India
• Italy
• Korea
• Netherlands
• Norway
• Poland
• Portugal
• Russia
Section 15: Adapters
191
• Serbia
• Spain
• Sweden
• Switzerland
• Thailand
• Turkey
192
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
exposure limits for radio frequency (RF) energy set by
the Federal Communications Commission (FCC) of the
U.S. government. These FCC exposure limits are
derived from the recommendations of two expert
organizations, the National Counsel on Radiation
Protection and Measurement (NCRP) and the Institute
of Electrical and Electronics Engineers (IEEE). In both
cases, the recommendations were developed by
scientific and engineering experts drawn from industry,
government, and academia after extensive reviews of
the scientific literature related to the biological effects of
RF energy.
The exposure limit set by the FCC for wireless mobile
phones employs a unit of measurement known as the
Specific Absorption Rate (SAR). The SAR is a measure
of the rate of absorption of RF energy by the human
body expressed in units of watts per kilogram (W/kg).
The FCC requires wireless phones to comply with a
safety limit of 1.6 watts per kilogram (1.6 W/kg). The
FCC exposure limit incorporates a substantial margin
of safety to give additional protection to the public and
to account for any variations in measurements.
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
194
Health and Safety Information
tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels
so as to use only the power required to reach the
network. In general, the closer you are to a wireless
base station antenna, the lower the power output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in
positions and locations (e.g. at the ear and worn on the
body) as required by the FCC. Body-worn operations
are restricted to Samsung-supplied, approved, or non-
Samsung designated accessories that have no metal
and must provide at least 1.5 cm separation between
the device, including its antenna (whether extended or
retracted) and the user's body. Non-compliance with
the above restrictions may result in violation of FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for
this mobile phone with all reported SAR levels
evaluated as in compliance with the FCC RF exposure
guidelines. The maximum SAR values for this model
phone as reported to the FCC are:
• Head:1.47 W/Kg.
• Body-worn: 1.08 W/Kg.
SAR information on this and other model phones can
be viewed on-line at www.fcc.gov/oet/fccid. To find
information that pertains to a particular model phone,
Section 16: Health and Safety Information
195
this site uses the phone FCC ID number which is
usually printed somewhere on the case of the phone.
Sometimes it may be necessary to remove the battery
pack to find the number. Once you have the FCC ID
number for a particular phone, follow the instructions
on the website and it should provide values for typical
or maximum SAR for a particular phone. Additional
product specific SAR information can also be obtained
at www.fcc.gov/cgb/sar.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes
the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held
wireless phones with built-in antennas, often called
"cell," "mobile," or "PCS" phones. These types of
wireless phones can expose the user to measurable
radio frequency energy (RF) because of the short
distance between the phone and the user's head. These
RF exposures are limited by Federal Communications
Commission safety guidelines that were developed
with the advice of FDA and other federal health and
safety agencies. When the phone is located at greater
distances from the user, the exposure to RF is
drastically lower because a person's RF exposure
decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a
196
Consumer Information on Wireless Phones
base unit connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus
produce RF exposures well within the FCC's
compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that
any health problems are associated with using wireless
phones. There is no proof, however, that wireless
phones are absolutely safe. Wireless phones emit low
levels of radio frequency energy (RF) in the microwave
range while being used. They also emit very low levels
of RF when in the stand-by mode. Whereas high levels
of RF can produce health effects (by heating tissue),
exposure to low level RF that does not produce heating
effects causes no known adverse health effects. Many
studies of low level RF exposures have not found any
biological effects. Some studies have suggested that
some biological effects may occur, but such findings
have not been confirmed by additional research. In
some cases, other researchers have had difficulty in
reproducing those studies, or in determining the
reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new
drugs or medical devices. However, the agency has
authority to take action if wireless phones are shown to
emit radio frequency energy (RF) at a level that is
Section 16: Health and Safety Information
197
hazardous to the user. In such a case, FDA could
require the manufacturers of wireless phones to notify
users of the health hazard and to repair, replace or
recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
• "Support needed research into possible biological effects of RF
of the type emitted by wireless phones;
• "Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device function;
and
• "Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use
on human health.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
• "National Institute for Occupational Safety and Health
• "Environmental Protection Agency
• "Federal Communications Commission
• "Occupational Safety and Health Administration
• "National Telecommunications and Information Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
198
Consumer Information on Wireless Phones
(FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from
these base stations are typically thousands of times
lower than those they can get from wireless phones.
Base stations are thus not the primary subject of the
safety questions discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy (RF)
exposures characteristic of wireless phones have
yielded conflicting results that often cannot be repeated
in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate
the development of cancer in laboratory animals.
However, many of the studies that showed increased
tumor development used animals that had been
genetically engineered or treated with cancer-causing
chemicals so as to be pre-disposed to develop cancer in
absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These
conditions are not similar to the conditions under
which people use wireless phones, so we don't know
Section 16: Health and Safety Information
199
with certainty what the results of such studies mean for
human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use
of wireless phones and primary brain cancer, glioma,
meningioma, or acoustic neuroma, tumors of the brain
or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
However, none of the studies can answer questions
about long-term exposures, since the average period of
phone use in these studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and
epidemiological studies of people actually using
wireless phones would provide some of the data that
are needed. Lifetime animal exposure studies could be
completed in a few years. However, very large
numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one exists.
Epidemiological studies can provide data that is
directly applicable to human populations, but ten or
more years' follow-up may be needed to provide
answers about some health effects, such as cancer. This
is because the interval between the time of exposure to
a cancer-causing agent and the time tumors develop - if
they do - may be many, many years. The interpretation
of epidemiological studies is hampered by difficulties
in measuring actual RF exposure during day-to-day use
200
Consumer Information on Wireless Phones
of wireless phones. Many factors affect this
measurement, such as the angle at which the phone is
held, or which model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
FDA has been a leading participant in the World
Health Organization international Electromagnetic
Fields (EMF) Project since its inception in 1996. An
influential result of this work has been the
development of a detailed agenda of research needs
that has driven the establishment of new research
programs around the world. The Project has also
helped develop a series of public information
documents on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative
Research and Development Agreement (CRADA) to do
research on wireless phone safety. FDA provides the
scientific oversight, obtaining input from experts in
government, industry, and academic organizations.
CTIA-funded research is conducted through contracts
to independent investigators. The initial research will
include both laboratory studies and studies of wireless
phone users. The CRADA will also include a broad
assessment of additional research needs in the context
of the latest research developments around the world.
Section 16: Health and Safety Information
201
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point
we do not know that there is - it is probably very small.
But if you are concerned about avoiding even potential
risks, you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is
a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless
phone will reduce RF exposure.
• "If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or
use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that
wireless phones are harmful. But if you are concerned
about the RF exposure from these products, you can
use measures like those described above to reduce your
RF exposure from wireless phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to users
of wireless phones, including children and teenagers. If
you want to take steps to lower exposure to radio
frequency energy (RF), the measures described above
would apply to children and teenagers using wireless
phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF
source will reduce RF exposure.
202
Consumer Information on Wireless Phones
Some groups sponsored by other national governments
have advised that children be discouraged from using
wireless phones at all. For example, the government in
the United Kingdom distributed leaflets containing
such a recommendation in December 2000. They noted
that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by
children was strictly precautionary; it was not based on
scientific evidence that any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free
kits can be used with wireless phones for convenience
and comfort. These systems reduce the absorption of
RF energy in the head because the phone, which is the
source of the RF emissions, will not be placed against
the head. On the other hand, if the phone is mounted
against the waist or other part of the body during use,
then that part of the body will absorb more RF energy.
Wireless phones marketed in the U.S. are required to
meet safety requirements regardless of whether they
are used against the head or against the body. Either
configuration should result in compliance with the
safety limit.
Section 16: Health and Safety Information
203
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that accessories that claim to shield the head
from those emissions reduce risks. Some products that
claim to shield the user from RF absorption use special
phone cases, while others involve nothing more than a
metallic accessory attached to the phone. Studies have
shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called
"shields" may interfere with proper operation of the
phone. The phone may be forced to boost its power to
compensate, leading to an increase in RF absorption. In
February 2002, the Federal trade Commission (FTC)
charged two companies that sold devices that claimed
to protect wireless phone users from radiation with
making false and unsubstantiated claims. According to
FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless
telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of
Medical instrumentation (AAMI). The final draft, a
joint effort by FDA, medical device manufacturers, and
204
Consumer Information on Wireless Phones
many other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that
cardiac pacemakers and defibrillators are safe from
wireless phone EMI. FDA has tested wireless phones
and helped develop a voluntary standard sponsored by
the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and
performance requirements for hearing aids and
wireless phones so that no interference occurs when a
person uses a compatible phone and a compatible
hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones
for possible interactions with other medical devices.
Should harmful interference be found to occur, FDA
will conduct testing to assess the interference and work
to resolve the problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the
following organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and health Administration's (OSHA):
http://www.osha.slc.gov/SLTC/radiofrequencyradiation/
index.html
• National institute for Occupational Safety and health (NIOSH):
http://www.cdc.gov/niosh/emfpg.html
• World health Organization (WHO):
http://www.who.int/peh-emf/
Section 16: Health and Safety Information
205
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.nrpb.org.uk
• Updated 4/3/2002: US food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But
an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features help
you to place your call without taking your attention off
the road.
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
3. Position your wireless phone within easy reach. Be able
to access your wireless phone without removing your
eyes from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.
206
Road Safety
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice and
even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while
driving. Jotting down a "to do" list or flipping through
your address book takes attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary.
If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then
continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Make people you are talking
with aware you are driving and suspend conversations
that have the potential to divert your attention from the
road.
8. Use your wireless phone to call for help. Dial 9-1-1 or
other local emergeny number in the case of fire, traffic
accident or medical emergencies. Remember, it is a free
call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1
or other local emergency number, as you would want
others to do for you.
Section 16: Health and Safety Information
207
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see
a broken-down vehicle posing no serious hazard, a
broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen,
call roadside assistance or other special non-emergency
number.
"The wireless industry reminds you to use your phone safely
when driving."
For more information, please call 1-888-901-SAFE, or
visit our web-site www.wow-com.com
Provided by the Cellular Telecommunications &
Internet Association
Operating Environment
Remember to follow any special regulations in force in
any area
and always switch your phone off whenever it is
forbidden to use it, or when it may cause interference or
danger. When connecting the phone or any accessory to
another device, read its user's guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating
position (held to your ear with the antenna pointing
over your shoulder).
208
Using Your Phone Near Other Electronic Devices
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the
RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be maintained
between a wireless phone and a pacemaker to avoid
potential interference with the pacemaker.
These recommendations are consistent with the
independent research and recommendations of
Wireless Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm (6 inches) from
their pacemaker when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to
discuss alternatives.
Section 16: Health and Safety Information
209
Other Medical Devices
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information. Switch your phone off in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted
notices requireyou to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
210
Emergency Calls
the need to observe restrictions on the use of radio
equipment in fuel depots
(fuel storage and distribution areas), chemical plants or
where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below
deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as
propane or butane), areas where the air contains
chemicals or particles, such as grain, dust or metal
powders, and any other area where you would
normally be advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well as
user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should
never rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must
be switched on and in a service area with adequate
signal strength. Emergency calls may not be possible on
all wireless phone networks or when certain network
services and/or phone features are in use. Check with
local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
Section 16: Health and Safety Information
211
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example),
you may
first need to deactivate those features before you can
make an emergency call. Consult this document and
your local cellular service provider.
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut
off the call until given permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be
allowed to play
with it because they could hurt themselves and others,
damage the phone or make calls that increase your
phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used
in close proximity to receiving equipment. The FCC can
require you to stop using the phone if such interference
cannot be eliminated.
212
Other Important Safety Information
Vehicles using liquefied petroleum gas (such as
propane or butane) must comply with the National Fire
Protection Standard (NFPA-58). For a copy of this
standard, contact the National Fire Protection
Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
Cautions
Any changes or modifications to your phone not
expressly approved in this document could void your
warranty for this equipment, and void your authority
to operate this equipment. Only use approved
batteries, antennas and chargers. The use of any
unauthorized accessories may be dangerous and void
the phone warranty if said accessories cause damage or
a defect to the phone.
Although your phone is quite sturdy, it is a complex
piece of equipment and can be broken. Avoid dropping,
hitting, bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the
phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the
device.
• Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both
installed or portable wireless equipment in the area over the air
Section 16: Health and Safety Information
213
bag or in the air bag deployment area. If wireless equipment is
improperly installed and the air bag inflates, serious injury
could result.
• Switch your phone off before boarding an aircraft. The use of
wireless phone in aircraft is illegal and may be dangerous to
the aircraft's operation.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the offender, or
legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends
on the signal strength in your area. Your phone informs
you of the current signal strength by displaying a
number of bars next to the signal strength icon. The
more bars displayed, the stronger the signal.
If you're inside a building, being near a window may
give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes
of searching, a Power Save feature is automatically
activated. If your phone is active, it periodically
rechecks service availability or you can check it yourself
by pressing any key.
Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your
phone returns to standby mode.
214
Availability of Various Features/Ring Tones
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver.
When it's turned on, it receives and transmits radio
frequency (RF) signals. When you use your phone, the
system handling your call controls the power level.
This power can range from 0.006 watts to 0.2 watts in
digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.
There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.
• Hold the phone with the antenna raised, fully-extended and
over your shoulder.
• Try not to hold, bend or twist the phone's antenna.
• Don't use the phone if the antenna is damaged.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the power
off and remove the battery. If it is inoperable, call Customer
Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and
may require additional subscription and/or usage
charges. Not all features are available for purchase or
use in all areas. Downloadable Ring Tones may be
available at an additional cost. Other conditions and
Section 16: Health and Safety Information
215
restrictions may apply. See your service provider for
additional information.
216
Battery Standby and Talk Time
Battery Standby and Talk Time
Standby and talk times will vary depending on phone
usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating temperature,
features selected, frequency of calls, and voice, data,
and other application usage patterns.
Battery Precautions
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses
less power; talk and standby time are greatly affected by the
signal strength on the cellular network and the parameters set
by the network operator.
• Battery charging time depends on the remaining battery
charge and the type of battery and charger used. The battery
can be charged and discharged hundreds of times, but it will
gradually wear out. When the operation time (talk time and
standby time) is noticeably shorter than normal, it is time to buy
a new battery.
• If left unused, a fully charged battery will discharge itself over
time.
• Use only Samsung-approved batteries and recharge your
battery only with Samsung-approved chargers. When a charger
is not in use, disconnect it from the power source. Do not leave
the battery connected to a charger for more than a week, since
overcharging may shorten its life.
• Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity
and lifetime of the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold battery may
Section 16: Health and Safety Information
217
temporarily not work, even when the battery is fully charged.
Li-ion batteries are particularly affected by temperatures below
0 °C (32 °F).
• Do not short-circuit the battery. Accidental short- circuiting can
occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and - terminals of the battery (metal
strips on the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
• Dispose of used batteries in accordance with local regulations.
In some areas, the disposal of batteries in household or
business trash may be prohibited. For safe disposal options for
Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a
fire.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep the phone and all its parts and accessories out of the
reach of small children.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its
moving parts may be damaged.
• Do not store the phone in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms
up to its normal operating temperature, moisture can form
218
Care and Maintenance
inside the phone, which may damage the phone's electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough handling can
break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
• Do not paint the phone. Paint can clog the device's moving
parts and prevent proper operation.
• Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may explode
when overheated.
• Use only the supplied or an approved replacement antenna.
Unauthorized antennas or modified accessories may damage
the phone and violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
Section 16: Health and Safety Information
219
220
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P.
("SAMSUNG") warrants to the original purchaser
("Purchaser") that SAMSUNG's Phones and accessories
("Products") are free from defects in material and
workmanship under normal use and service for the
period commencing upon the date of purchase and
continuingforthefollowingspecifiedperiodoftimeafter
that date:
Phone1 Year
Batteries 1 Year
Leather Case/ Pouch 90 Days
Holster 90 Days
Other Phone Accessories 1 Year
WhatisNotCovered?ThisLimitedWarrantyisconditioned
upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of
any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number
removedormadeillegible;(c)anyplasticsurfacesorother
externally exposed parts that are scratched or damaged
duetonormaluse;(d)malfunctionsresultingfromtheuse
of Product in conjunction with accessories, products, or
222
Standard Limited Warranty
ancillary/peripheral equipment not furnished or
approved by SAMSUNG; (e) defects or damage from
impropertesting,operation,maintenance,installation,or
adjustment; (f) installation, maintenance, and service of
Product, or (g) Product used or purchased outside the
United States or Canada. This Limited Warranty covers
batteries only if battery capacity falls below 80% of rated
capacity or the battery leaks, and this Limited Warranty
does not cover any battery if (i) the battery has been
chargedbyabatterychargernotspecifiedorapprovedby
SAMSUNGforchargingthebattery,(ii)anyofthesealson
the battery are broken or show evidence of tampering, or
(iii)thebatteryhasbeenusedinequipmentotherthanthe
SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG's sole option, without charge to Purchaser,
any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must
return Product to an authorized phone service facility in
an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof
ofsaleshowingthedateofpurchase,theserialnumberof
Product and the sellers' name and address. To obtain
assistanceon where todeliver the Product, call Samsung
Customer Care at 1-888-987-4357. Upon receipt,
SAMSUNG will promptly repair or replace the defective
Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components
when repairing any Product or replace Product with a
rebuilt, reconditioned or new Product. Repaired/
replaced leather cases, pouches and holsters will be
Section 17: Warranty Information
223
warranted for a period of ninety (90) days. All other
repaired/replacedProductwillbewarrantedforaperiod
equal to the remainder of the original Limited Warranty
on the original Product or for 90 ays, whichever is longer.
All replaced parts, components, boards and equipment
shall become the property of SAMSUNG. If SAMSUNG
determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts,
shipping,andlaborchargesfortherepairorreturnofsuch
Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPTASSETFORTHINTHEEXPRESSWARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE
ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• "THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS
FOR ANY PARTICULAR PURPOSE OR USE;
• "WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• "DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
• "THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• "COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN
224
Standard Limited Warranty
EXPRESS WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE
BY OPERATION OF LAW, INCLUDING IF
APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO
THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME
STATES/PROVINCESDONOTALLOWLIMITATIONS
ONHOWLONGANIMPLIEDWARRANTYLASTS,SO
THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
IN ADDITION, SAMSUNG SHALL NOT BE LIABLE
FOR ANY DAMAGES OF ANY KIND
RESULTINGFROMTHEPURCHASE,USE,ORMISUSE
OF, OR INABILITY TO USE THE PRODUCT OR
ARISINGDIRECTLYORINDIRECTLYFROMTHEUSE
OR LOSS OF USE OF THE PRODUCT OR FROM THE
BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIALORSIMILARDAMAGES,ORLOSS
OF ANTICIPATED PROFITS OR BENEFITS, OR FOR
DAMAGESARISINGFROMANYTORT(INCLUDING
NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR
EMPLOYEES, OR FOR ANY BREACH OF CONTRACT
OR FOR ANY CLAIM BROUGHT AGAINST
PURCHASER BY ANY OTHER PARTY. SOME STATES/
PROVINCES DO NOT ALLOW THE EXCLUSION OR
LIMITATIONOFINCIDENTALORCONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU. THIS
Section 17: Warranty Information
225
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
ANDYOUMAYALSOHAVEOTHERRIGHTS,WHICH
VARY FROM STATE TO STATE/PROVINCE TO
PROVINCE. THIS LIMITED WARRANTY SHALL NOT
EXTENDTOANYONEOTHERTHANTHEORIGINAL
PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY
PORTION OF THIS LIMITED WARRANTY IS HELD
ILLEGALORUNENFORCEABLEBYREASONOFANY
LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS
LIMITED WARRANTY WHICH PURCHASER
ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS
LIMITED AS THE LAW PERMITS. THE PARTIES
UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN
CONJUNCTION WITH THE PRODUCT. SAMSUNG
MAKES NO WARRANTIES OR REPRESENTATIONS
AND THERE ARE NO CONDITIONS, EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY
THIRDPARTY SOFTWARE OR EQUIPMENT,
WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT
DISTRIBUTED BY SAMSUNG OR OTHERWISE,
INCLUDING THE ABILITY TO INTEGRATE ANY
SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES,
OPERATIONS, PERFORMANCE AND SUITABILITY
226
Intellectual Property Statement
OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER
OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG's
Product pricing reflects this allocation of risk and the
limitationsofliabilitycontainedinthisLimitedWarranty.
The agents, employees, distributors, and dealers of
SAMSUNG are not authorized to make modifications to
this Limited Warranty, or make additional warranties
binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation,
whether oral or written, do not constitute warranties by
SAMSUNG and should not be relied upon.
Samsung Telecommunications America, L.P.
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2005 Samsung Telecommunications America. All
rights reserved.
No reproduction in whole or in part allowed without
prior
written approval. Specifications and availability subject
to change without notice.
Intellectual Property Statement
Section 17: Warranty Information
227
All Intellectual Property, as defined below, owned by or
which is otherwise the property of Samsung or its
respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or
software relating thereto (the "Phone System"), is
proprietary to Samsung and protected under federal
laws, state laws, and international treaty provisions.
Intellectual Property includes, but is not limited to,
inventions (patentable or unpatentable), patents, trade
secrets, copyrights, software, computer programs, and
related documentation and other works of authorship.
You may not infringe or otherwise violate the rights
securedbytheIntellectualProperty. Moreover,youagree
thatyouwillnot(andwillnotattemptto)modify,prepare
derivative works of, reverse engineer, decompile,
disassemble, or otherwise attempt to create source code
from the software. No title to or ownership in the
Intellectual Property is transferred to you. All applicable
rights of the Intellectual Property shall remain with
SAMSUNG and its suppliers.
228
Samsung Telecommunications America (STA), L.P.
Samsung Telecommunications America (STA),
L.P.
Internet Address: http://www.samsungusa.com
©2005SamsungTelecommunicationsAmerica.Samsung
is a registered trademark of Samsung Electronics
America, Inc. and its related entities.
Licensed by Qualcomm Incorporated under one or more
ofthe followingpatents:U.S.PatentNo.4,901,307;5,056,
109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109,
390.
Printed in South Korea
GH68-05891A
Rev. 3.0 (12-17-03)
Openwave® is aregisteredTrademarkofOpenwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Samsung Telecommunications America (STA),
Inc.
Headquarters:Customer Care Center:
1301 E. Lookout Drive1601 E. Plano Parkway, Suite 150
Richardson, TX 75082Plano, TX 75074
Tel: 972.761.7000Toll Free Tel: 1.888.987.HELP (4357)
Fax: 972.761.7001Fax: 972.801.6065
Section 17: Warranty Information
229
230
Auto delete 134
Auto hyphen 119
Auto retry 136
Index
Numerics
B
1X protocol icon 23
2G protocol icon 24
3G protocol icon 23
911, notes about 123
A
Backlight settings 117
Backup to last menu 58
Banner, creating 117
Battery
charging 28
indicator 28
removing 27
strength icon 24
Adaptation, for digit dial 50
Adapters 187
Add, edit, erase tasks 162
Adding a New Phonebook
Entry 78
C
Call a name or number 47
Call barring 140
Call diverting 139
Airplane mode 39
Alarm clock
Call Functions 29
icon 24
set alarm 163
snooze 165
turn off the alarm 165
Call Log 34
Making a Call 30
Roaming 41
Silent mode 39
Answer options 135
Call logs, deleting 36
Call Options 135
Call timers 36
Call waiting 141
Callback # 133
Caller ID 142
Apps
buying 175
cancelling subscription
demo 175
disabled 176
expired 176
removing 176
restoring 176
CDMA 32
Call another country from
the U.S. 32
Placing calls outside the
U.S. 32
Auto answer 136
Auto answer icon 22
231
auto hyphen 119
backlight 117
banner 117
language 115
screen icons 22
style setting 115
CDMA only features
auto retry 136
data sub menu 137
send v-card 99
voice privacy 125
Change lock 122
Charger, desktop 28
Closed user group 143
Creating and Sending New
Messages 110
Draft messages 106
DST
home and visiting area
setting 158
Creating and Sending Text
message 110
D
Data sub menu 137
Delete All 90
Delete memory 126
Desktop charger 28
DST Icon 24
E
Emergency numbers
lock mode 124
store 124
Entering Text 69
Changing the Text Entry
Mode 70
Dialing
Entering Numbers 73
Entering Upper and Low-
er Case 71
one-touch 97
three-touch 97
two-touch 97
Dialogue boxes 25
Using T9 Mode 70
Digit dial
Erase voice memos 44
Events, viewing calendar
adapt to your voice 51
adaptation 50
reset adaptation 52
tips 49
tips for adapting 51
use 50
Exit VZW with MSN 183
Expired apps 176
F
FindingaPhonebookEntry
Disable alarm 165
Display
animation 115
Finding stored names 93
232
Call the U.S. from another
country using the Phone-
book 31
Calling Internationally
from another country 31
Folder
inbox 104
outbox 105
saved/draft 106
G
GSM mode icon 22
Get It Now 171
Help 174
GSM only features
call barring 140
Options 172
call diverting 139
call waiting 141
caller ID 142
closed user group 143
edit SIM entries 92
select network 142
Get It Now Help 174
Buying new apps 175
Charges 175
Demo apps 175
Removing apps 176
Subscription 175
H
Hard pause 80
What do I pay? 175
Get It Now Settings 173
Health and Safety Infor-
Getting Started 11
Activating Your Phone 12
Understanding this User
Manual 15
mation 193
I
Icons
battery strength 24
display 22
in use 23
Voicemail 13
GPS icons 24
Groups
signal strength 22
creating 84
deleting 85
In use icon 23
Indicator
move entries from/to 83
renaming 84
send messages to 86
send pix msg to 87
viewing 82
battery strength 24
new message 23
no service 23
roaming 23
signal strength 22
vibrate mode 24
GSM 31
Call the U.S. from another
country 31
Intalling Your SIMS Card
233
Messaging 103
Types of Messages 104
In-use menu 59
IS95-2G protocol 24
L
Language setting 115
Launch VZW with MSN 183
Location 129
Mobile Web 177
Keys 179
Launching 178
Using 178
Mode
airplane 39
call answer 135
entry 132
standby 38
switching 37
text entry 38
TTY 40
Lock code, changing 122
Lock phone 121
M
Memo pad 156
vibrate 39
Memory Information 102
Memos, editing 156
Menu Navigation 57
Menu Outline 60
Menu shortcuts 58
Menu, in-use option 59
Msg Setting 131
Multimedia 145
Receiving a Pix Messges
View the Image Gallery in
thumbnails 146
Message folder
My Name Card 99
N
inbox 104
outbox 105
Navigate the Web 183
Navigation key shortcuts
saved/draft 106
Message folders 104
Inbox folder 104
Outbox folder 105
Saved/draft folder 106
Network Services 167
Call Forwarding 168
Call Waiting 168
Message send option 111
Caller ID 169
Network Selection 169
Messages and lock mode
Network, selecting 142
New message icon 23
Messages, receive in call
234
No service indicator 23
settings 132
view later 151
Place a call while using
VZW with MSN 185
Planner
Notes and tips 15
O
Options, message sending
Outbox, reviewing mes-
sages 105
add a new event 159
memo pad 156
view an event 161
world time 157
P
Pause dial 81
Power Adapters 187
Powering off 13
Powering on 12
Profile Settings 119
R
Personal Organizer 153
Alarm 163
Calculator 166
Calendar 159
To-Do List 162
Phone mode, switching 37
Receive messages in call
Phonebook
find by entry 95
find by group 95
find by name 94
find on SIM 96
p pause & t pause 80
pause dial 81
store pauses 81
v-card 99
Phonebook Groups 82
Receive text messages 108
Recent calls
call timers 36
menu options 35
viewing 34
Remove applications 173
Remove SIM card 26
Removing battery 27
Reset phone 127
Restoring apps 176
Restrict calls 126
PIN
change 129
check 128
menu 128
Pix messages
receiving 150
Restriction 126
Retrieving New Message
rejecting 150
Sending Pix Messages
235
style 115
Shortcut List 121
Shortcut to menus 58
Signal strength icon 22
Return to last menu 58
Reviewing outbox 105
Ringer off icon 24
Ringer on icon 24
Ringer Settings 138
Roaming
Definition 41
Options 41
SIM card
find entries on 96
removing 26
store new entries to 92
Snooze 165
Speed dial, assigning 98
Speed Dialing 97
Roaming indicator 23
S
1-touch 97
2-touch 97
3-touch 97
Security
change lock 122
lock phone 121
restriction 126
voice privacy 125
Standard Limited Warran-
ty
Standard Limited War-
ranty 222
Select network 142
Send option, messages 111
Service LED 118
Standby mode 38
Store emergency numbers
Set an alarm 163
Settings 113
animation 115
auto hyphen 119
backlight 117
Store numbers 91
Store pauses 81
Storing numbers after a
call 91
Style setting 115
Subscriptions, cancelling
banner 117
change lock 122
Display Settings 114
language 115
lock phone 121
Resetting Your Phone
T
Tasks, editing 162
Text entry modes 111
Security Settings 121
service LED 118
236
Phonebook Entry 88
Text message settings 131
Text messages, receiving
V
V-cards, sending 99
Vibrate mode 39
Vibrate mode icon 24
View an event, calendar
Text messages, sending
Time/date
CDMA 155
GSM 155
Voice kit
Tips
erase memos 44
menu 42
review and erase memos
Tips, for digit dial 49
Turn your phone off 13
Turn your phone on 12
Turning Your Phone On
and Off 12
voice setting 45
Voice Kit (CDMA Only) 42
Voice mail
listening to 14
setup 14
Two-second pause 80
U
Voice memo 43
Voice privacy 125
Voice setting 45
Voice Signal 46
Looking up contacts 52
UnderstandingYourPhone
Battery 27
Display Screen 22
Features of Your Phone
Front View of Your Phone
Voice signal
check phone status 54
digit dial adaptation 50
digit dial tips 49
open an application 54
sending a message 53
using digit dial 50
voice memo 43
Understanding Your
Phonebook 75
Adding a New Phonebook
Entry 78
Deleting a Phonebook En-
try 89
Editing an Existing
Voicemail 109
Receive Voicemail mes-
237
|