Samsung SGH Z230 User Manual

SGH-Z230  
User’s Guide  
Be aware of special regulations  
Accessories and batteries  
Meet any special regulations in force in any  
area and always switch off your phone  
whenever it is forbidden to use it, or when it  
may cause interference or danger.  
Use only Samsung-approved batteries and  
accessories, such as headsets and PC data  
cables. Use of any unauthorised accessories  
could damage you or your phone and may  
be dangerous.  
Water resistance  
• The phone could explode if the battery is  
replaced with an incorrect type.  
• Dispose of used batteries according to the  
manufacturer’s instructions.  
Your phone is not water-resistant. Keep it  
dry.  
Sensible use  
At very high volumes, prolonged  
listening to a headset can damage your  
hearing.  
Use only in the normal position (held to the  
ear). Avoid unnecessary contact with the  
antenna when the phone is switched on.  
Emergency calls  
Qualified service  
Key in the emergency number for your  
Only qualified service personnel may repair  
your phone.  
present location, then press  
.
Keep your phone away from small  
children  
For more detailed safety information, see  
"Health and safety information" on page  
104.  
Keep the phone and all its parts, including  
accessories, out of the reach of small  
children.  
1
 
3G  
About this Guide  
Your phone is capable of  
operating in a 3G  
environment, allowing  
much greater data transfer  
speed, video streaming,  
and video conferencing.  
This User’s Guide provides you with  
condensed information about how to use  
your phone. To quickly learn the basics for  
your phone, please refer to “Get started”  
and “Step outside the phone.”  
In this guide, the following instruction icons  
appear:  
Indicates that you need to pay  
careful attention to the subsequent  
information regarding safety or  
phone features.  
Special  
features of your phone  
Camera and camcorder  
Use the camera module on  
your phone to take a photo  
or record a video.  
Indicates that you can get more  
information on the referenced page.  
Indicates that you need to press the  
Navigation keys to scroll to the  
specified option and then select it.  
Media player  
Play media files on your  
phone. You can enjoy high  
quality videos and music.  
[
]
Indicates a key on the phone. For  
example, [  
]
< >  
Indicates a soft key, whose function  
is displayed on the phone screen.  
For example, [OK  
]
2
Bluetooth  
Email  
Transfer media files and  
personal data and connect  
to other devices using free,  
wireless Bluetooth  
technology.  
Send and receive e-mails  
with images, video, and  
audio attachments.  
Name card  
Create name cards with  
your number and profile.  
Whenever introducing  
yourself to others, use this  
convenient electronic name  
card.  
File viewer  
Open documents in various  
formats on the phone  
without corruption.  
Web browser  
Java  
Access the wireless web to  
get up-to-the-minute  
information and a wide  
variety of media content.  
Enjoy Java™-based  
embedded games and  
download new games.  
Multimedia Message  
Service (MMS)  
Send and receive MMS  
messages with a  
combination of text,  
images, video, and audio.  
Calendar  
Keep track of your daily,  
weekly, and monthly  
schedule.  
Voice recorder  
Record memos or sounds.  
3
Send messages....................................... 20  
View messages ....................................... 22  
Use Bluetooth......................................... 23  
Switch applications.................................. 24  
Use a memory card ................................. 25  
Contents  
Unpack  
6
6
7
Make sure you have each item  
Enter text  
27  
Your phone  
ABC, T9, Number, and Symbol modes  
Keys, features, and locations  
Call functions  
29  
Get started  
Advanced calling features  
First steps to operating your phone  
Install and charge the phone...................... 7  
Power on or off......................................... 8  
Keys and display ...................................... 9  
Access menu functions ............................ 12  
Customise your phone............................. 13  
Make/Answer calls .................................. 15  
Menu functions  
34  
All menu options listed  
Solve problems  
102  
Help and personal needs  
Health and safety  
information  
Step outside the phone  
16  
104  
112  
Begin with your camera, the media player, the  
web, and other special features  
Index  
Use the camera...................................... 16  
Play music............................................. 17  
Browse the web...................................... 18  
Use Contacts.......................................... 19  
4
Overview of menu functions  
To access Menu mode, press [OK] in Idle mode.  
4 Internet  
p. 48  
7 Organiser  
p. 75  
1 Call log  
p. 34  
1 Go to homepage  
2 Enter URL  
p. 48  
p. 49  
p. 49  
p. 50  
p. 50  
p. 51  
p. 51  
1 Alarms  
p. 75  
p. 76  
p. 79  
p. 79  
p. 79  
p. 80  
p. 80  
p. 80  
p. 80  
p. 80  
1 Missed calls  
2 Dialled calls  
3 Received calls  
4 Current contacts  
5 Delete all  
p. 34  
p. 35  
p. 35  
p. 35  
p. 35  
p. 35  
p. 36  
p. 36  
2 Calendar  
3 Bookmarks  
4 Saved pages  
5 History  
3 Week view  
4 Today’s events  
5 Schedule  
6 Anniversary  
7 Task  
8 Memo  
6 Advanced  
7 Browser settings  
6 Data calls  
7 Calls cost1  
8 Calls time  
5 Messages  
p. 51  
9 Missed event alarm  
0 Memory status  
2 Contacts  
p. 37  
1 Create new  
2 Inbox  
3 Drafts  
4 Outbox  
p. 51  
p. 56  
p. 58  
p. 58  
p. 59  
p. 59  
p. 60  
p. 61  
p. 62  
p. 62  
p. 62  
p. 68  
1 Search contact  
2 New contact  
3 Groups  
4 Speed dial  
5 My name card  
6 Copy all  
p. 37  
p. 38  
p. 39  
p. 40  
p. 40  
p. 41  
p. 41  
p. 41  
p. 41  
p. 41  
8 Camera  
p. 81  
9 Settings  
p. 87  
5 Sent box  
6 Email inbox  
7 Media Album2  
8 Templates  
9 Broadcast  
0 Delete all  
* Settings  
1 Profiles  
p. 87  
p. 88  
p. 89  
p. 90  
p. 91  
p. 94  
p. 98  
p. 99  
p. 101  
p. 101  
p. 101  
2 Time & date  
3 Phone  
7 Own number  
8 Service number1  
9 Settings  
4 Display  
5 Call  
0 Memory status  
6 Connectivity  
7 Application settings  
8 Security  
# Memory status  
3 Applications  
p. 42  
6 File manager  
p. 68  
1 SAT1  
p. 42  
p. 42  
p. 44  
p. 46  
p. 46  
p. 47  
9 Memory status  
0 Operator settings2  
* Reset settings  
Images  
p. 68  
p. 70  
p. 71  
p. 72  
p. 73  
p. 74  
p. 75  
2 Media player  
3 Voice recorder  
4 World clock  
5 Calculator  
6 Converter  
Videos  
Music  
Sounds  
Games & More  
Other files  
Memory card3  
1. Shows only if supported by your  
USIM/SIM card.  
2. Shows only if supported by your  
service provider.  
3. Shows only if a memory card is  
inserted.  
5
Unpack  
Your phone  
Make sure you have each item  
Keys, features, and locations  
External  
camera lens  
Camera key  
Phone  
Travel Adapter  
User’s Guide  
External display  
Headset/  
Adapter jack  
Earpiece  
Battery  
You can obtain various  
accessories from your local  
Samsung dealer.  
Navigation  
keys  
(Up/Down/  
Left/Right)  
Interior camera lens  
Application switch key  
Video call  
The items supplied with your  
phone and the accessories  
available at your Samsung  
dealer may vary, depending  
on your country or service  
provider.  
Confirm key  
key  
Right soft key  
Left soft key  
Volume keys  
Dial key  
Power on/off/Menu exit key  
Delete key  
Alphanumeric  
keys  
Special function keys  
Microphone  
Memory card  
slot  
6
         
Get started  
First steps to operating your phone  
Install the battery.  
Plug the travel  
adapter into the  
phone.  
SIM card information  
When you subscribe to a cellular network,  
you receive a plug-in SIM (Subscriber  
Identity Module) card loaded with your  
subscription details, such as your PIN, and  
available optional services. For 3G services,  
you can purchase a USIM (Universal  
Subscriber Identity Module) card.  
Plug the adapter into a standard AC wall  
outlet.  
Install and charge the phone  
Remove the  
battery.  
Insert the USIM/  
SIM card.  
When the phone is completely charged  
(the battery icon becomes still), unplug  
the adapter from the wall outlet.  
If the phone is  
Make sure that the  
gold-coloured  
contacts on the  
card are face  
down.  
already on, first turn  
it off by pressing and  
holding [ ].  
7
           
Get started  
Power on or off  
Remove the adapter from the phone.  
Switch on  
1. Open the phone.  
2. Press and hold [ ].  
Do not turn on  
the phone when  
mobile phone  
use is  
3. If necessary, enter the  
PIN and press  
<Confirm>.  
prohibited.  
Low battery indicator  
When the battery is low:  
Switch off  
1. Open the phone.  
a warning tone sounds,  
the low battery message displays, and  
2. Press and hold [ ].  
the empty battery icon  
blinks.  
If the battery level becomes too low, the  
phone automatically turns off. Recharge  
your battery.  
8
       
Keys and display  
Keys  
Delete characters from the  
display or items in an  
application.  
Make a video call.  
Press and hold to switch the  
phone on or off.  
End a call.  
In Menu mode, cancel input and  
return the phone to Idle mode.  
Open the application switch  
window to access other  
applications without exiting the  
current application.  
Perform the function indicated on  
the bottom line of the display.  
Enter numbers, letters, and  
some special characters.  
In Idle mode, press and hold [1]  
to access your voicemail server.  
Press and hold [0] to enter an  
In Idle mode, access your  
favourite menus directly.p. 89  
In Menu mode, scroll through  
menu options.  
international call prefix.  
Enter special characters.  
In Idle mode, press and hold [  
to activate or deactivate the  
Silent profile. Press and hold [ ]  
to enter a pause between  
numbers.  
In Menu mode, select the  
highlighted menu option or  
confirm input.  
]
Make or answer a call.  
In Idle mode, retrieve numbers  
recently dialled, missed, or  
received.  
9
 
Get started  
Adjust the phone volume.  
In Idle mode, with the phone  
open, adjust the key tone  
volume. With the phone closed,  
press and hold to turn on the  
external display.  
Icons1  
Received signal strength  
Accessing services in a  
GPRS (2.5G) network;  
when transferring data,  
this icon animates  
Accessing services in a  
UMTS (3G) network;  
when transferring data,  
this icon animates  
In Idle mode, press and hold to  
turn on the camera.  
In Camera mode, switch the  
camera lens.  
Roaming network  
Voice call in progress  
Display  
Layout  
Out of your service area;  
you cannot send or  
receive voice calls  
Icons  
display various icons.  
Text and graphics  
display messages,  
instructions, and  
Video call in progress  
Out of your service area;  
you cannot send or  
receive video calls  
information you enter.  
Soft key function  
indicators  
show the current  
functions assigned  
to the soft keys.  
Select  
Back  
Bluetooth activep. 94  
10  
       
Connected with a  
Bluetooth hands-free car  
kit or headset  
Inbox full  
: SMS  
: MMS  
: Email  
: Voicemail  
: Configuration  
message  
Memory card inserted  
p. 25  
Connected with a  
computer via a USB port  
Sound profile setting  
Browsing Internet on PC  
using phone as modem  
p. 87  
: Normal  
: Meeting  
: Car  
: Silent  
: Outdoor  
Connected to secured  
web page  
New message  
: SMS  
: MMS  
Battery power level  
: Email  
1. Depending on your country or service provider,  
the icons shown on the display may vary.  
: Voicemail  
: Push message  
: Configuration  
message  
11  
Get started  
Access menu functions  
Select an  
option  
1. Press a desired soft key.  
Use the soft  
keys  
The roles of the soft keys  
vary depending on the  
2. Press the Navigation  
keys to move to the  
function you are using. The  
bottom line of the display  
indicates their current role.  
next or previous option.  
3. Press <Select> or  
[OK] to confirm the  
function displayed or  
option highlighted.  
Select  
Back  
4. To exit, choose either of  
the following methods.  
Press <Back> to  
move up one level.  
Press [ ] to return  
to Idle mode.  
Press the left  
soft key to  
select the  
highlighted  
option.  
Press the right  
soft key to  
return to the  
previous menu  
level.  
Use  
shortcuts  
Press the number key  
corresponding to the  
option you want.  
12  
 
Customise your phone  
3. Press <Options> and  
select Edit  
.
1. In Idle mode, press [OK  
and select Settings  
Phone Language  
Screen text  
]
Display  
language  
4. Select Voice call  
ringtone and select a  
ringtone for voice calls.  
.
2. Select a language.  
5. Select Video call  
ringtone and select a  
ringtone for video calls.  
3. Press <Save>.  
6. Press <Options> and  
You can change the call  
ringer by changing the  
properties of the currently  
active sound profile.  
Call ringer  
melody  
select Save  
To change the sound profile:  
1. In Idle mode, press [OK  
and select Settings  
Profiles  
.
]
To change the profile  
properties:  
.
1. In Idle mode, press [OK  
]
2. Select the profile you  
want.  
and select Settings  
Profiles  
2. Scroll to the sound  
profile you are using.  
.
13  
 
Get started  
You can set wallpaper for the  
idle screen on the main  
display.  
You can activate the Silent  
profile to avoid disturbing  
other people.  
Idle mode  
wallpaper  
Silent  
profile  
1. In Idle mode, press [OK  
and select Settings  
Display Wallpaper  
]
Press and hold [ ] in Idle  
mode.  
.
2. Scroll to an image folder.  
3. Select an image.  
4. Press <Set>.  
You can protect the phone  
against unauthorised use  
with a phone password. The  
phone will require the  
Phone lock  
password on power-up.  
You can set the Navigation  
keys to function as shortcuts  
to access your favourite  
menus.  
Menu  
shortcuts  
1. In Idle mode, press [OK  
and select Settings  
Security Change  
]
phone password  
.
1. In Idle mode, press [OK  
and select Settings  
Phone Shortcuts  
]
2. Enter the default  
.
password, 00000000  
and press <Confirm>.  
,
2. Select a key.  
3. Enter a new 4- to 8-digit  
password and press  
3. Select a menu to be  
assigned to the key.  
<Confirm>.  
4. Enter the new password  
again and press  
<Confirm>.  
14  
 
5. Select Phone lock  
.
1. When the phone rings,  
press [ ].  
Answer a  
call  
6. Select Enable  
.
2. For a video call, press  
7. Enter the password and  
<Show me> to allow  
press <Confirm>.  
the other person to see  
you.  
Make/Answer calls  
3. To end the call, press  
[
].  
To make a voice call:  
Make a call  
1. Enter an area code and  
phone number.  
Press [ / ].  
Adjust the  
volume  
during a call  
2. Press [ ].  
3. To end the call, press  
[
].  
To make a video call:  
1. Enter an area code and  
phone number.  
2. Press [ ] and if their  
phone is compatible, the  
other person appears on  
the screen.  
15  
 
Step outside the phone  
Begin with your camera, the media player, the  
1. In Idle mode, press [OK  
and select File manager  
Images  
]
View a  
photo  
.
web, and other special features  
2. Select the photo you  
want from the Pictures  
folder.  
Use the camera  
1. Open the phone.  
Take a  
photo  
2. In Idle mode, press and  
hold [ ] to turn on the  
camera.  
1. In Idle mode, press and  
hold [ ] to turn on the  
camera.  
Record a  
video  
3. Press [ ] to switch  
between the front lens  
and the rear lens.  
2. Press [1] to switch to  
Record mode.  
3. Press [ ] to switch  
between the front lens  
and the rear lens.  
4. Aim the lens at the  
subject and make any  
desired adjustments.  
4. Press [OK] to start  
5. Press [OK] to take a  
photo. The photo is saved  
automatically.  
recording.  
5. Press [OK] to stop  
recording. The video is  
saved automatically.  
6. Press <  
> to take  
another photo.  
6. Press <Back> to record  
another video.  
16  
       
1. In Idle mode, press [OK  
and select File manager  
Videos  
]
1. In Idle mode, press [OK  
and select Applications  
Media player  
2. Press [OK].  
3. Press <Options> and  
select Add Folder or  
Files  
]
Play a video  
Create a  
play list  
.
.
2. Select the video you  
want from the Videos  
folder.  
.
Play music  
4. For Folder, select a  
folder.  
Use these methods:  
Copy music  
files to the  
phone  
For Files, press [OK] to  
select the files you want  
and press <Add>.  
Download from the  
wireless web p. 48  
Download from a  
computer using the  
optional Samsung PC  
StudioSamsung PC  
Studio User’s Guide  
Receive via Bluetooth  
p. 94  
Copy files to a memory  
card and insert the card  
into the phonep. 25  
17  
 
Step outside the phone  
Browse the web  
1. From the media player  
Play music  
files  
Using a built-in web browser, you can easily  
access the wireless web to get a variety of  
up-to-date services and information and to  
download web content.  
screen, press [OK].  
2. Select the file you want.  
3. During playback, use the  
following keys:  
In Idle mode, press [OK  
and select Internet Go to  
homepage  
]
OK: pauses or  
resumes playback.  
Left: returns to the  
previous file. Moves  
backward in a file  
when held down.  
Right: skips to the  
next file. Skips  
forward in a file when  
held down.  
Up: accesses the play  
list.  
/ : adjusts the  
volume.  
Launch the  
web  
.
browser  
To scroll through browser  
items, press [Up] or  
[Down].  
Navigate  
the web  
To select an item, press  
[OK].  
To return to the previous  
page, press <Back>.  
To access browser  
options, press  
4. Press [Down] to stop  
playback.  
<Options>.  
18  
 
Use Contacts  
To the USIM/SIM card:  
To the phone’s memory:  
1. In Idle mode, enter a  
phone number and press  
Add a  
contact  
1. In Idle mode, enter a  
phone number and press  
<
Options>.  
2. Select Save to Contacts  
SIM New  
<
Options>.  
2. Select Save to Contacts  
Phone New  
.
a
3. Specify contact  
information: Name,  
Phone number, Group (for  
USIM), and Location  
number.  
number type.  
3. Specify contact  
information: First name,  
Last name, Phone  
number, Work Email,  
Home Email, Group,  
Homepage, Birthday, and  
More information (Job  
title, Department,  
4. Press <Save>, or press  
<Options> and select  
Save to save the contact.  
Company, Nickname, and  
Notes).  
4. Press <Options> and  
select Save to save the  
contact.  
19  
 
Step outside the phone  
1. In Idle mode, press [OK  
and select Contacts  
Search contact  
]
4. To send the name card,  
access My name card  
again.  
Find a  
contact  
.
2. Enter the first few letters  
of the name you want.  
5. Press <Options> and  
select Send name card  
a sending method.  
3. Select a contact.  
4. Scroll to a number and  
Send messages  
press  
[
]
to dial, or  
press [OK] to edit  
contact information.  
1. In Idle mode, press [OK  
and select Messages  
Create new Text  
message  
]
Send a text  
message  
(SMS)  
1. In Idle mode, press [OK  
]
Create and  
send a  
name card  
.
and select Contacts  
My name card  
2. Enter the message text  
.
and press [OK].  
2. Specify your contact  
information.  
3. Enter destination  
numbers.  
3. Press <Options> and  
select Save to save the  
name card.  
4. Press [OK] to send the  
message.  
20  
 
1. In Idle mode, press [OK  
and select Messages  
Create new  
Multimedia message  
]
1. In Idle mode, press [OK  
and select Messages  
Create new File  
messenger  
]
Send a  
Send files  
by MMS  
multimedia  
message  
(MMS)  
.
.
2. Enter the message  
subject.  
2. Enter the message  
subject.  
3. Select Text  
.
3. Move to the Message  
field.  
4. Enter the message text  
and press [OK].  
4. Enter the message text.  
5. Select Picture or Video  
or Audio  
5. Move to the Attach files  
.
line.  
6. Add an image, a video  
clip, or a sound clip.  
6. Press <Options> and  
select Add files  
name card, or Add  
v-calendar  
,
Add  
7. Press [OK].  
.
8. Enter destination  
numbers or e-mail  
addresses.  
7. Add images, videos,  
sounds, name cards, or  
calendar data.  
9. Press [OK] to send the  
8. Press [OK].  
message.  
9. Enter destination  
numbers or e-mail  
addresses.  
10.Press [OK] to send the  
message.  
21  
Step outside the phone  
View messages  
1. In Idle mode, press [OK  
and select Messages  
Create new Email  
]
Send an  
e-mail  
.
When a notification appears:  
View a text  
message  
1. Press <View>.  
2. Enter the e-mail subject.  
2. Select the message from  
the Inbox.  
3. Move to the Message  
field.  
From the Inbox:  
4. Enter the e-mail text.  
1. In Idle mode, press [OK  
and select Messages  
Inbox  
2. Select an SMS message  
).  
]
5. Move to the Attach files  
line.  
.
6. Press <Options> and  
select Add files  
name card, or Add  
v-calendar  
,
Add  
(
.
When a notification appears:  
1. Press <View>.  
View a  
multimedia  
message  
7. Add images, videos,  
sounds, name cards, or  
calendar data.  
2. Press <Options> and  
select Retrieve  
.
8. Press [OK].  
3. Select the message from  
the Inbox.  
9. Enter e-mail addresses.  
10.Press [OK] to send the  
e-mail.  
22  
 
Use Bluetooth  
From the Inbox:  
Your phone is equipped with Bluetooth  
technology, enabling you to connect the  
phone wirelessly to other Bluetooth devices  
and exchange data with them, talk  
1. In Idle mode, press [OK  
]
and select Messages  
Inbox  
2. Select an MMS message  
).  
.
hands-free, or control the phone remotely.  
(
1. In Idle mode, press [OK  
and select Settings  
Connectivity  
Bluetooth Activation  
On  
2. Select My phone’s  
visibility On to allow  
]
Turn on  
1. In Idle mode, press [OK  
and select Messages  
Email inbox  
]
Bluetooth  
View an  
e-mail  
.
.
2. Press <Options> and  
select Download to  
download new e-mails or  
headers.  
other devices to find your  
phone.  
3. Select an e-mail or  
header.  
1. In Idle mode, press [OK  
]
Search for  
and pair  
with a  
Bluetooth  
device  
4. If you selected a header,  
press <Options> and  
select Retrieve to view  
the body of the e-mail.  
and select Settings  
Connectivity  
Bluetooth  
devices  
device  
2. Select a device.  
My  
Search new  
.
23  
 
Step outside the phone  
3. Enter a Bluetooth PIN or  
1. When a device attempts  
to access your phone,  
press <Yes> to permit  
the connection.  
Search for  
and pair  
with a  
Bluetooth  
device  
(continued)  
Receive  
data  
the other device’s  
Bluetooth PIN, if it has  
one, and press <OK>.  
When the owner of the  
other device enters the  
same code, pairing is  
complete.  
2. If necessary, press  
<Yes> to confirm that  
you are willing to receive.  
Switch applications  
You can switch to other applications from a  
menu, without closing the menu screen you  
were using.  
1. Access an application,  
Send data  
Contacts  
,
File  
manager, or Organiser  
.
2. Select the item you want  
to send.  
1. While using a menu,  
Switch to  
an  
application  
3. Press <Options> and  
press  
[
].  
select Send name card  
Send Send schedule  
Send task Via  
bluetooth  
4. Select a device.  
/
2. Select an application.  
/
/
Call: opens the dialling  
screen.  
.
Available  
applications  
Messages: accesses the  
Messages menu.  
5. If necessary, enter the  
Bluetooth PIN and press  
Internet: launches the  
web browser.  
<OK>.  
24  
 
1. Press  
[
]
.
Do not touch card  
Close all  
terminals with your  
fingers or metal objects.  
If dirty, wipe the card  
with a soft cloth.  
running  
2. Scroll to End all?  
.
applications  
3. Press <Yes>.  
Use a memory card  
You can use an optional microSD memory  
card to increase your phone’s memory  
capacity.  
Keep cards away from  
small children or pets.  
Do not expose cards in a  
place subject to  
electro-static discharge  
and/or electrical noise.  
Frequent erasing and  
writing will shorten a  
card’s lifespan.  
Important  
memory  
card  
1. Slide a memory card into  
the card slot, with the  
label side face up.  
Insert a  
memory  
card  
information  
Do not remove a card  
from the phone or turn  
off the phone while data  
is being accessed or  
transferred. This could  
result in loss of data and/  
or damage to the card or  
phone.  
Do not subject cards to  
strong shocks.  
2. Press the card until it  
locks into place.  
25  
     
Step outside the phone  
1. Press the memory card  
Remove the  
memory  
card  
so that it is disengaged  
from the phone.  
2. Slide the card out of the  
slot.  
Using a card adapter and a  
USB card reader/writer, you  
can read the card on a PC.  
Use a card  
adapter  
1. Insert a memory card  
into a card adapter, and  
then the adapter into a  
card reader/writer.  
2. Plug the USB connecter  
of the card reader/writer  
into the USB port on your  
PC.  
3. Access the appropriate  
memory disk and copy to  
and from the card.  
26  
Using T9 mode  
T9 is a predictive text input mode that  
allows you to key in any character using  
single keystrokes.  
Enter text  
ABC, T9, Number, and Symbol modes  
You can enter text for some features, such  
as Messages, Contacts, or Organiser, using  
ABC mode, T9 mode, Number mode, and  
Symbol mode.  
Entering a word in T9 mode  
1. Press [  
Press each key once for each letter.  
For example, press [ ], [ ], [ ], [  
and [ ] to enter Hello in T9 mode.  
2] to [9] to start entering a word.  
4
3
5
5],  
Changing the text input mode  
6
Press and hold [ ] to switch between T9  
mode ( ) and ABC mode ( ).  
Depending on your country, you may  
also be able to access an input mode for  
your specific language.  
T9 predicts the word that you are typing,  
and it may change with each key that  
you press.  
2. Enter the whole word before editing or  
deleting characters.  
Press [ ] to change case or switch to  
3. When the word displays correctly, go to  
Number mode (  
Press and hold [ ] to switch to Symbol  
mode ( ).  
).  
step 4. Otherwise, press [0] to display  
alternative word choices for the keys  
that you have pressed.  
For example, Of and Me use [6] and [3].  
4. Press [ ] to insert a space and enter the  
next word.  
27  
       
Enter text  
Other T9 mode operations  
Using ABC mode  
Press the appropriate key until the character  
you want appears on the display.  
Press [1] to enter periods or apostrophes  
automatically.  
Press [ ] to insert a space.  
Characters in order displayed  
Key  
Press the Navigation keys to move the  
cursor.  
Lower case  
Upper case  
Press [C] to delete characters one by  
one. Press and hold [  
display.  
C] to clear the  
Adding a new word to the T9  
dictionary  
This feature may not be available for some  
languages.  
1. Enter the word that you want to add.  
(Creating an SMS message with GSM alphabet  
encoding)  
2. Press [0] to display alternative words for  
your key presses. When there are no  
more alternative words, Spell appears  
on the bottom line.  
Other ABC mode operations  
To enter the same letter twice or to enter  
a different letter on the same key, wait  
for the cursor to move to the right  
automatically or press [Right]. Then,  
enter the next letter.  
3. Press <Spell>.  
4. Enter the word you want using ABC  
mode and press <Add>.  
Press [ ] to insert a space.  
28  
 
Press the Navigation keys to move the  
cursor.  
Call functions  
Advanced calling features  
Press [C] to delete characters one by  
one. Press and hold [  
display.  
C] to clear the  
Making a call  
1. In Idle mode, enter the area code and  
phone number.  
Using Number mode  
Number mode enables you to enter  
numbers.  
• Press [C] to clear the last digit or  
press and hold [  
display.  
• Press and hold [ ] to enter a pause  
between numbers.  
C] to clear the whole  
Press the keys corresponding to the digits  
you want.  
2. Press [ ].  
3. When you want to end the call, press  
].  
Using Symbol mode  
Symbol mode enables you to insert symbols.  
[
To  
Press  
Making an international call  
display more  
symbols  
[Up] or [Down].  
1. In Idle mode, press and hold [  
0]. The  
+
character appears.  
select a symbol  
the corresponding  
number key.  
2. Enter the country code, area code, and  
phone number, then press [ ].  
clear the entered  
symbols  
[C].  
insert the symbols  
<OK>.  
29  
       
Call functions  
Redialling recent numbers  
1. In Idle mode, press [ ] to display the  
list of recent numbers.  
Answering a call  
When you receive an incoming call, the  
phone rings and displays the incoming call  
image.  
2. Scroll to the number you want and press  
[
].  
Press <Accept> or [ ] to answer the call.  
Making a call from Contacts  
Tips for answering a call  
Once you have stored a number in Contacts,  
you can dial the number by selecting it from  
When Anykey answer is active, you can  
press any key, except for <Reject> and  
Contacts.p. 37  
[
].  
When Active folder is active, you can  
simply open the phone. p. 89  
p. 89  
You can also use the speed dial feature to  
assign your most frequently dialled numbers  
to specific number keys.p. 40  
Press <Reject> or [ ] to reject a call.  
You can quickly dial a number from the  
USIM/SIM card using its location number  
assigned when stored.  
Press and hold [ / ] to reject a call or  
mute the ringer, depending on the  
Volume key setting.p. 89  
1. In Idle mode, enter a location number  
and press [ ].  
Viewing missed calls  
If you have missed calls, the screen displays  
how many calls you have missed.  
2. Scroll through other numbers, if  
necessary.  
3. Press <Call> or [ ] to make a voice  
1. Press <View>.  
call.  
2. If necessary, scroll through the missed  
calls.  
3. Press [ ] to dial the number you want.  
30  
       
Placing a call on hold/Retrieving  
Press <Hold> to place a call on hold, or  
press <Unhold> to retrieve the call.  
Using the headset  
Use the headset to make or answer calls  
without holding the phone.  
Connect the headset to the jack on the right  
side of the phone. The button on the  
headset works as follows:  
Making a second call  
You can make another call if your network  
supports this function.  
To  
Press  
1. Press <Hold> to put the call on hold.  
2. Make the second call in the normal way.  
redial the last call  
and hold the button  
twice.  
3. Press <Swap> to switch between the  
calls.  
answer a call  
end a call  
and hold the button.  
and hold the button.  
4. Press <Options> and select Drop  
Drop held call to end the call on hold.  
5. To end the current call, press [ ].  
Options during a call  
You can access a number of functions during  
a call.  
Answering a second call  
You can answer an incoming call while  
already on the phone, if your network  
supports this function and you have  
Adjusting the volume during a call  
Use [ / ] to adjust the earpiece volume  
during a call.  
activated the call waiting feature.  
p. 92  
1. Press [ ] to answer the call. The first  
call is automatically put on hold.  
Press [ ] to increase the volume level and  
[ ] to decrease the volume level.  
2. Press <Swap> to switch between the  
calls.  
31  
   
Call functions  
3. Press <Options> and select Drop  
Mute key tone/Unmute key tone:  
turn the key tones off or on.  
Drop held call to end the call on hold.  
4. To end the current call, press [ ].  
To communicate with answering  
machines or computerised telephone  
systems, Unmute key tone must be  
selected.  
Using the speakerphone feature  
Use the speaker feature to talk and listen  
with the phone a short distance away.  
New call: make a new call.  
Press [OK] and then <Yes> to activate the  
speakerphone feature. Press [OK] again to  
switch back to the earpiece.  
Contacts: access the contact list.  
Send text message: create and send a  
new SMS message.  
Send DTMF: send the DTMF (Dual tone  
multi-frequency) tones as a group. The  
DTMF tones are the tones used in phones  
for tone dialling, sounding when you  
press the number keys. This option is  
helpful for entering a password or an  
account number when you call an  
automated system, like a banking  
service.  
Using In-call options  
Press <Options> to access the following  
options during a call:  
Loudspeaker/Loudspeaker off: turn  
on the speakerphone feature or switch  
back to Normal mode.  
Switch to headset/Switch to phone:  
switch the call to a Bluetooth headset or  
back to the phone. To use this feature,  
you first need to connect your headset to  
Memo: create a memo.  
Transfer: transfer the currently active  
call to a caller on hold. The two callers  
can talk to each other, but you are  
disconnected from the call.  
the phone.  
p. 94  
Mute Unmute: switch off the phone's  
/
microphone so that the other person on  
the phone cannot hear you, or switch it  
back on.  
32  
       
Join: set up a multi-party call by adding  
a caller on hold to a currently active call.  
You can include up to 5 people on a  
multi-party call.  
Making a video call  
1. In Idle mode, enter the area code and  
phone number.  
2. Press [ ].  
Split: have a private conversation with  
one multi-party call participant. The  
other participants can converse with  
each other. After the private  
Answering a video call  
When you receive a video call, answer as  
you would when receiving a voice call. Press  
conversation, select Join to return both  
private participants to the multi-party  
call.  
<Show me> to allow the caller to see you.  
Using video call options  
During a video call, press <Options> to  
access the following options:  
Drop: disconnect the call currently on  
hold or active call.  
Loudspeaker/Loudspeaker off: turn  
on the speakerphone feature or switch  
back to Normal mode.  
Drop call: disconnect one multi-party  
call participant.  
End call: disconnect the call currently  
on hold, active call, or all calls.  
Switch to headset/Switch to phone:  
switch the call to a Bluetooth headset or  
back to the phone. To use this feature,  
you first need to connect your headset to  
Using the video call feature  
the phone.  
p. 94  
In a 3G (UMTS) service area, your phone  
can make or receive a video call, allowing  
you to see the other person on the screen  
during a conversation. The other person’s  
phone must support the video call feature.  
Mute camera: turn off the camera.  
Mute voice: turn off the microphone.  
Mute camera & voice: turn off the  
camera and the microphone.  
33  
       
Mute key tone  
turn the key tones off or on.  
/Unmute key tone:  
Menu functions  
All menu options listed  
Zoom: display the zoom control bar and  
zoom in or out by pressing [Up] or  
[Down], or hide the zoom control bar.  
Call log (Menu 1)  
Brightness/Hide brightness: display  
the brightness control bar and adjust the  
brightness by pressing [Left] or [Right],  
or hide the control bar.  
Use this menu to view the calls you have  
dialled, received, or missed, and the length  
of the calls. You can also check the cost of  
your calls, if your USIM/SIM card supports  
this function.  
Effects: change the colour tone of the  
image.  
Show information  
hide or display information about the  
video call.  
/
Hide information  
:
To access this menu, press [OK] in Idle  
mode and select Call log.  
Missed calls (Menu 1.1)  
Send DTMF: send Dual tone  
multi-frequency (DTMF) tones as a group  
after entering the entire number you  
need to send or retrieving a number  
from Contacts.  
This menu displays the most recently  
received calls that you did not answer.  
Accessing a call log  
1. Press [Left] or [Right] to move to  
another call type.  
Video quality: change the image  
quality of the camera.  
2. Press [Up] or [Down] to scroll through  
the call list.  
End call: end the video call.  
3. Press [OK] to view the details of a call,  
or press [ ] to dial a number.  
34  
       
Using call log options  
Current contacts (Menu 1.4)  
While viewing call details, press <Options  
to access the following options:  
>
This menu displays all of the contacts you  
have dialled, received, or missed.  
Voice call: make a voice call to the  
number.  
Delete all (Menu 1.5)  
Video call: make a video call to the  
number, if the 3G service is available.  
Use this menu to delete all of the logs in  
each call type.  
Use number: paste the selected  
number to the normal dialling screen.  
1. Press [OK] to select the call types to be  
cleared.  
Save to Contacts: save the selected  
number in Contacts.  
2. Press <Delete>.  
3. Press <Yes> to confirm the deletion.  
Send message: send a message to the  
selected number via SMS, MMS, or File  
messenger.  
If the phone is locked, it will require the  
password. The password is preset to  
00000000. You can change this password.  
p. 100  
Delete: delete the call log.  
Delete all: delete all call logs.  
Data calls (Menu 1.6)  
Dialled calls (Menu 1.2)  
Use this menu to view the total amount of  
sent or received data.  
This menu displays the most recent calls you  
have dialled.  
Total sent: check the total amount of  
data you have sent.  
Received calls (Menu 1.3)  
Total received: check the total amount  
of data you have received.  
This menu displays the most recent calls you  
have received.  
35  
           
Menu functions  
To reset a counter or all counters, press  
Edit cost limit: set the maximum cost  
authorised for your calls.  
<Options> and select Reset or Reset all  
.
Setup currency: set the price per unit  
that is applied when the cost of your call  
is calculated.  
If the phone is locked, it will require the  
password. The password is preset to  
00000000. You can change this password.  
p. 100  
Calls time (Menu 1.8)  
Calls cost (Menu 1.7)  
This menu displays the time log for voice  
and video calls made and received. The  
actual time invoiced by your service provider  
will vary.  
This network feature displays the cost of  
calls. This menu is available only if  
supported by your USIM/SIM card. Note that  
this is not intended to be used for billing  
purposes.  
Total dialled: check the total length of  
voice calls dialled.  
Total costs: check the total cost of all  
your calls. If the total cost exceeds the  
Total received: check the total length  
of voice calls received.  
maximum cost set in Edit cost limit  
you must reset the counter before you  
can make another call.  
,
Total dialled: check the total length of  
video calls dialled.  
Total received: check the total length  
of video calls received.  
Last call cost: check the cost of your  
last call.  
To reset a counter or all counters, press  
Max cost: check the maximum cost set.  
<Options> and select Reset or Reset all.  
Press <Options> to access the following  
options:  
If the phone is locked, it will require the  
password. The password is preset to  
00000000. You can change this password.  
Reset call cost: reset the cost counters.  
p. 100  
36  
   
Send message: send a message to the  
selected number or e-mail address via  
SMS, MMS, File messenger, or e-mail.  
Contacts (Menu 2)  
You can store phone numbers on your USIM/  
SIM card and in your phone’s memory. The  
USIM/SIM card and phone’s memory are  
physically separate, but they are used as a  
single entity called Contacts.  
Special options: set the following  
options:  
Picture: assign a caller ID image to alert  
you to a call from the person.  
To access this menu, press [OK] in Idle  
mode and select Contacts  
Ringtone: assign a ringtone to alert you  
to a call from the person.  
.
Msg. alert tone: select a ringtone to  
alert you to an incoming message from  
the person.  
Search contact (Menu 2.1)  
Use this menu to search for contacts in  
Contacts.  
Add to speed dial: set the selected  
number as a speed dial entry.  
Finding a contact  
1. Enter the first few letters of the name  
that you want to find.  
Video call: make a video call to the  
number, if the 3G service is available.  
2. Select a contact from the list.  
Copy to SIM/Copy to phone: copy the  
3. Scroll to a number and press [ ] to dial,  
or press [OK] to edit contact  
information.  
contact from the phone’s memory to the  
USIM/SIM card, or vice versa.  
Send name card: send the contact via  
SMS, MMS, e-mail, File messenger, or  
Bluetooth.  
Using contact options  
While viewing contact details, press  
Use number: paste the selected  
number to the normal dialling screen.  
<Options> to access the following options:  
Edit: edit contact information.  
Delete: delete the contact.  
37  
               
Menu functions  
More information: enter the job  
title, department, company,  
nickname, and additional note of the  
person.  
New contact (Menu 2.2)  
Use this menu to add a new contact to  
Contacts.  
Storing a contact in the phone’s  
memory  
3. Press <Options> and access the  
following options to add additional  
information:  
1. Select Phone  
.
2. Change the settings or enter information  
about the contact.  
Special options: assign a caller ID  
image, call ringer, or message ringer  
for the contact.  
Add phone number: add a phone  
number in any type to the contact.  
Delete phone number: remove the  
selected number type from the  
contact.  
Change type: change the number  
type from the contact.  
Mark video call/Unmark video  
call: set the selected number as a  
video call number, or cancel the  
setting.  
First name/Last name: assign a  
name.  
Phone number: add a phone  
number in any type.  
Work Email: assign a business  
e-mail address.  
Home Email: assign a personal  
e-mail address.  
Group: assign the contact to a caller  
group.  
Homepage: enter a homepage  
address.  
4. Press <Options> and select Save to  
Birthday: enter the person’s  
birthday.  
save the contact.  
38  
     
Storing a contact on the USIM/SIM  
card  
Groups (Menu 2.3)  
Use this menu to organise your contacts in  
caller groups.  
1. Select SIM  
.
2. Enter information about the contact.  
Creating a caller group  
1. Press <Options> and select Add  
Name: assign a name.  
Phone number: add a phone  
number.  
group  
.
2. Enter a name for the group.  
Group: (For USIM) assign a caller  
group.  
Location number: enter a location  
number.  
3. Press <Save> to save the group.  
Adding members to a caller group  
1. Select a group.  
3. If you are using a USIM card, press  
Options> to add additional  
information.  
2. Press [OK] to select the contacts to be  
<
added.  
3. Press <Save>.  
Add item: add a number type to the  
contact.  
Managing caller groups  
Delete item: remove the selected  
category from the contact.  
From the group list, press <Options> to  
access the following options:  
4. Press <Save>, or press <Options> and  
View members: check the members of  
the selected group.  
select Save to save the contact.  
Add member: add contacts to the  
selected group.  
Add group: add a new group.  
39  
   
Menu functions  
Rename group: change the group  
name.  
Details: check the name and number  
assigned to a key.  
Delete group: delete the selected  
group. Group members, however, will  
not be deleted from Contacts.  
Video call: make a video call to the  
number assigned to a key.  
Change: assign a different number to a  
key.  
Delete all groups: delete all groups  
including default groups.  
Remove: clear the speed dial setting for  
a key.  
Speed dial (Menu 2.4)  
Dialling speed dial numbers  
Use this menu to assign speed dial numbers  
(2 to 9) to 8 of your most frequently dialled  
numbers.  
In Idle mode, press and hold the appropriate  
key.  
Assigning speed dial numbers  
My name card (Menu 2.5)  
1. Select a key location from  
2
to  
9
. Key  
1
Use this menu to create your name card and  
send it to other people.  
is reserved for your voicemail server.  
2. Select a contact from the contact list.  
3. Select a number.  
Saving your name card  
The procedure for creating your name card  
is the same as the one for saving a phone  
Managing speed dial entries  
number in the phone’s memory.p. 38  
From the Speed dial screen, press  
<
Options> to access the following options:  
Using name card options  
Add: assign a number to an unassigned  
key.  
After saving your name card, press  
<Options> to access the following options:  
Edit: edit the name card.  
40  
     
Send name card: send the name card  
via SMS, MMS, e-mail, File messenger, or  
Bluetooth.  
Settings (Menu 2.9)  
Use this menu to change the default settings  
for Contacts entries.  
Delete: delete the name card.  
Viewing settings: change the sort  
order of the contact list.  
Copy all (Menu 2.6)  
Default storage settings: select a  
default memory location for saving  
contacts. If you select Optionally, the  
phone will ask you to select a memory  
location each time you save a number.  
Use this menu to copy all of the contacts  
stored on the USIM/SIM card to the phone’s  
memory, or vice versa.  
Own number (Menu 2.7)  
Memory status (Menu 2.0)  
Use this menu to check your phone  
numbers, or to assign a name to each of the  
numbers. Changes made here do not affect  
the actual subscriber numbers on your  
USIM/SIM card.  
Use this menu to check the number of  
contacts you have stored in the phone’s  
memory and on the USIM/SIM card.  
Service number (Menu 2.8)  
Use this menu to view the list of Service  
Dialling Numbers (SDN) assigned by your  
service provider, including emergency  
numbers and numbers for directory  
enquiries. This menu is available if your  
USIM/SIM card supports SDN.  
Select the number you want and press [ ].  
41  
           
Menu functions  
Downloading or receiving music or  
video files  
Applications (Menu 3)  
Use this menu to play media files, to record  
a voice memo, to set time zone, or to use  
the phone as a calculator or converter.  
You can play the following types of files on  
your phone:  
Music: *.mp3, *.aac, *.wma, *.m4a,  
*.3ga, *.wav  
To access this menu, press [OK] in Idle  
mode and select Applications  
.
Video: *.mp4, *.3gp  
SAT (Menu 3.1)  
Use the following methods to save music or  
video files to your phone’s memory:  
This menu is available if you use a USIM/SIM  
card that supports SIM Application Toolkit  
menus and provides additional services,  
such as news, weather, sports,  
entertainment, and location services.  
Available services may vary, depending on  
your service provider’s plans.  
Download from the wireless web  
p. 48  
Download from a computer using  
Samsung PC StudioSamsung PC  
Studio User’s Guide  
Receive via an active Bluetooth  
connection p. 94  
Copy to a memory card and insert the  
card into the phone p. 25  
For details, see your USIM/SIM card  
instructions or contact your service provider.  
Downloaded or received files are stored in  
the Downloads folder in Music or Videos  
Media player (Menu 3.2)  
.
Use this menu to enjoy music and video  
files. First, you need to save files to your  
phone’s memory or on a memory card.  
42  
     
Creating the play list  
1. From the media player screen, press  
Key  
Up  
Function  
Accesses the play list.  
Adjusts the volume.  
Stops playback.  
[
OK].  
2. Press <Options> and select Add  
Folder or Files  
3. For Folder, select a folder.  
/
.
Down  
For Files, press [OK] to select the files  
you want and press <Add>.  
Using Media player options  
From the media player screen, press  
<Options> to access the following options:  
Playing media files  
Pause Resume: pause or resume  
playback.  
/
1. From the media player screen, press  
[OK].  
Stop: stop playback.  
2. Select a file. The file plays.  
Send: send the file via MMS, e-mail, File  
messenger, or Bluetooth.  
During playback, use the following keys:  
Key  
OK  
Function  
Open play list: access the play list.  
Pauses or resumes playback.  
Activate key: get a new licence key  
when the key for the selected DRM file  
expires.  
Left  
Returns to the previous file.  
Moves backward in a file when  
held down.  
Reactivate key: get another licence key  
even when the key for the selected DRM  
file has not expired.  
Right  
Skips to the next file. Skips  
forward in a file when held  
down.  
Go to File Manager: go to the Music  
and Videos folders.  
43  
 
Menu functions  
Visible to Bluetooth/Hidden from  
Accessing the play list  
Bluetooth: share the file with other  
Bluetooth devices, or hide the file so that  
other Bluetooth devices cannot access it.  
From the media player screen, press [OK] or  
[Up] to access the play list and press  
<Options> to access the following options:  
Show controller/Hide controller:  
display or hide the controller image.  
Play: play the selected file.  
Add: add files to the play list.  
Details: access the file properties.  
Remove: remove the selected file or all  
files from the current play list.  
Player settings: change the default  
settings for playing media files:  
Move: move the selected file to the  
position you want within the current play  
list or to another play list.  
Play options: select a repeat mode.  
Volume: select a volume level.  
Controller: display or hide the controller  
image.  
Copy: make a copy of the selected file in  
the current play list or to another play  
list.  
Audio player skin: select a skin type.  
New list: add a new play list.  
VOD settings: select a connection  
profile to be used for accessing a video  
streaming server. You can also create or  
Voice recorder (Menu 3.3)  
edit a profile.p. 97  
Use this menu to record voice memos. A  
voice memo can be up to one hour long.  
Key management: manage licence  
keys you have acquired.  
Recording a voice memo  
1. Press [OK] to start recording.  
2. Speak into the microphone.  
Press [OK] to pause or resume the  
recording.  
44  
     
3. Press <Stop> or [Down]. The voice  
Record: record a new voice memo.  
memo is saved automatically.  
Activate key: get a new licence key  
when the key for the selected DRM file  
expires.  
4. Press [OK] to review the memo, or press  
[Up] to record additional memos.  
Reactivate key: get another licence key  
even when the key for the selected DRM  
file has not expired.  
Playing a voice memo  
1. From the voice recorder screen, press  
<Options> and select Go to sounds.  
Send: send the file via MMS, e-mail, File  
messenger, or Bluetooth.  
2. Select a voice memo from the Voice  
memos folder. The memo plays.  
Set as ringtone: set the file as your  
ringtone for voice calls or video calls.  
During playback, use the following keys:  
Key  
OK  
Function  
Set as caller ID: set the file as a  
ringtone for a Contacts entry.  
Pauses or resumes playback.  
Moves backward in a file.  
Skips forward in a file.  
Adjusts the volume.  
Stops playback.  
Go to sounds: access the voice memo  
list.  
Left  
Right  
/
Delete: delete the file.  
Rename: change the file name.  
Visible to Bluetooth/Hidden from  
Down  
Bluetooth: share the file with other  
Bluetooth devices, or hide the file so that  
other Bluetooth devices cannot access it.  
Using voice recorder options  
After playback, press <Options> to access  
the following options:  
Details: access the file properties.  
Play: play the selected voice memo in  
Review mode.  
45  
   
Menu functions  
Record settings: customise the default  
settings for the voice recorder:  
Viewing world time  
1. From the world map, move to the lower  
line ( ).  
Default name: change the default  
prefix of file names.  
2. Press [Left] or [Right] to scroll to the city  
you want.  
Recording time: select a maximum  
recording time.  
3. Press [OK] to save the time zone.  
Key management: manage licence  
keys you have acquired.  
Applying daylight saving time  
1. From the world map, press <Options  
>
and select Summer time  
.
World clock (Menu 3.4)  
2. Press [OK] to select the time zones you  
Use this menu to set your local time zone  
and find out the current time in another part  
of the world.  
want.  
3. Press <Select>.  
4. Press [OK] to save the time zone.  
Setting the local time zone  
1. From the world map, press [Left] or  
[Right] to scroll to the city you want on  
the upper line ( ). As the time line  
moves, the time and date of the given  
zone display.  
Calculator (Menu 3.5)  
Use this menu to perform basic arithmetic  
functions such as addition, subtraction,  
multiplication, and division.  
2. Press [OK] to save the city as your local  
Performing a calculation  
1. Enter the first number.  
time zone.  
Press [ ] to include a decimal point.  
46  
       
2. Press one of the Navigation keys to  
access the math function you want.  
Performing a conversion  
1. Select a converter.  
3. Enter the second number.  
2. Press [Left] or [Right] to select the  
original unit and press [Down].  
4. Press [OK] to view the result.  
5. If necessary, repeat from step 2 to  
continue the calculation.  
3. Enter the value to be converted and  
press [Down].  
Press [ ] to insert a decimal point.  
Press [ ] to change the temperature  
to above zero (+) or below zero (-).  
Using calculator options  
Press <Options> to access the following  
options:  
4. Press [Left] or [Right] to select the unit  
to which you want to convert.  
Equal: view the result.  
Recent calculation: display the last  
result you calculated.  
The equivalent value for the amount you  
entered displays.  
Save to memory: save a value into the  
calculator memory.  
Using converter options  
Press <Options> to access the following  
options:  
Recall memory: retrieve the saved  
value.  
Clear: clear the current values.  
Clear memory: clear the saved value.  
Reverse: reverse the conversion.  
Converter (Menu 3.6)  
Currency rates: display the currency  
rate list.  
Use this menu for common conversions,  
such as currency and temperature.  
47  
 
Menu functions  
Using browser options  
Internet (Menu 4)  
From any web page, press <Options> to  
access the following options:  
The web browser on your phone allows you  
to access the wireless web. Using the web  
browser, you can access up-to-date  
information and a wide variety of media  
contents, such as wallpapers, ringtones, and  
music files.  
Go to: access the currently linked web  
page.  
Go: move backward or forward through  
pages in history.  
To access this menu, press [OK] in Idle  
mode and select Internet  
Reload: reload the current page with  
updated information.  
.
Desktop view/Smart-fit view: change  
the display mode of the browser.  
Go to homepage (Menu 4.1)  
Use this menu to connect your phone to the  
network and load the homepage of the  
wireless web service provider.  
Page size: change the page size.  
Go to homepage: return to the  
homepage.  
Navigating the web browser  
Add to Bookmarks: bookmark the  
current page.  
To  
Press  
View bookmarks: access the bookmark  
list.  
scroll through browser [Up] or [Down].  
items  
Enter URL: enter a URL address  
manually.  
select a browser item  
[OK] or  
<Select>.  
Copy URL: send the URL of the current  
page via SMS, MMS, or e-mail.  
return to the previous  
page  
<Back>.  
Save: save the image of the current web  
page or the current page.  
48  
     
Saved pages: access the list of web  
pages you have saved.  
Browser settings: select a connection  
profile to be used for connecting to the  
Internet. You can also create or edit a  
History: access the list of web pages  
you have accessed.  
profile.p. 97  
About browser: access version and  
copyright information about the browser.  
Advanced: change the various settings  
for the browser:  
Clear cache: clear the cache. The cache  
is a temporary memory site that stores  
recently accessed web pages.  
Exiting the web browser  
Press [ ] to end the network connection  
and exit the browser.  
Empty cookies: delete cookies. Cookies  
are pieces of personal information sent  
to a web server while navigating the  
web.  
Enter URL (Menu 4.2)  
Use this menu to manually enter a URL  
address and access the associated web  
page.  
Cookie options: set whether or not  
cookies are stored. If you select  
Prompt, the phone will ask you to save  
the cookies of the current page.  
You can add the entered address to the  
bookmark list by selecting Add bookmark  
.
Preferences: change the settings for  
the web browser to suit your preference.  
Bookmarks (Menu 4.3)  
Use this menu to save URL addresses in  
order to quickly access web pages, or access  
the preset bookmarks.  
Certificates: access the web browser  
certificate.  
Page details: access the page  
properties.  
49  
   
Menu functions  
Adding a new bookmark  
Saved pages (Menu 4.4)  
1. Press <Options> and select Add  
You can access the list of pages you have  
saved.  
bookmark  
.
2. Enter a title for the bookmark and press  
[Down].  
Select a page name from the list to access  
the corresponding web page.  
3. Enter a URL address and press <Save>.  
From the saved page list, press <Options  
>
Using bookmark options  
to access the following options.  
View: access the selected web page.  
From the bookmark list, press <Options  
to access the following options:  
>
Rename: change the saved page name.  
Go to: access the bookmarked web  
page.  
Delete: delete the selected web page or  
all pages.  
Enter URL: enter a URL address  
manually.  
History (Menu 4.5)  
Edit bookmark: edit the selected  
bookmark.  
You can access the list of pages you have  
accessed.  
Add bookmark: add a new bookmark.  
Select a URL address from the list to access  
the corresponding web page.  
Copy URL: send the URL address of the  
bookmark via SMS, MMS, or e-mail.  
From the history list, press <Options> to  
access the following options.  
Delete: delete the selected bookmark or  
all bookmarks.  
Go to: access the selected web page.  
Delete: delete the selected web page or  
all pages.  
Details: access the properties of the  
web page.  
50  
   
Advanced (Menu 4.6)  
Messages (Menu 5)  
Use this menu to clear the cache, delete  
cookies or change the browser display  
settings.  
Use the Messages menu to send and  
receive text messages, multimedia  
messages, and e-mails. You can also access  
push messages, voicemails, broadcast  
messages, and configuration messages.  
Clear cache: clear the cache. The cache  
is a temporary memory site that stores  
recently accessed web pages.  
To access this menu, press <Menu> in Idle  
Empty cookies: delete cookies. Cookies  
are pieces of personal information sent  
to a web server while navigating the  
web.  
mode and select Messages  
.
Create new (Menu 5.1)  
Use this menu to create and send text  
messages, multimedia messages, or  
e-mails. You can also send files using MMS.  
Cookie options: set whether or not  
cookies are stored. If you select  
Prompt, the phone will ask you to save  
the cookies of the current page.  
Text message (Menu 5.1.1)  
Short Message Service (SMS) allows you to  
send text messages.  
Preferences: change the settings for  
the web browser to suit your preference.  
Creating and sending an SMS message  
About browser: access version and  
copyright information about the browser.  
1. Enter your message and press [OK].  
• The maximum number of characters  
allowed in a message varies by service  
provider. If your message exceeds the  
maximum number of characters, the  
phone will split the message.  
Browser settings (Menu 4.7)  
Use this menu to select a connection profile  
to be used for connecting to the Internet.  
You can also create or edit a profile.  
p. 97  
• You can use various options by  
pressing <Options>.next section  
51  
           
Menu functions  
2. Enter a destination number.  
Creating and sending an MMS message  
1. Enter the message subject.  
To send the message to more than one  
recipient, fill in additional destination  
fields.  
You can use various options by pressing  
<Options> in each field.  
next section  
3. Press [OK] to send the message.  
2. Select the Text line.  
Using options while composing an SMS  
message  
3. Enter the message text and press [OK].  
4. Select the Picture or Video or Audio  
line and add an image, a video, or a  
sound clip.  
While composing a message, press  
<Options> to access the following options:  
Send: send the message.  
• The maximum size allowed for a  
message can differ, depending on your  
service provider.  
Input method: change the text input  
mode.  
• Depending on the file type or DRM  
(Digital Rights Management) system,  
some files may not be able to be  
forwarded.  
Input language: change the language  
to be used in T9 input mode.  
Insert: insert a text template, Contacts  
entry, or bookmark into text.  
5. When you have finished, press [OK].  
Save to Drafts: save the message in  
the Drafts folder.  
6. Enter a phone number or e-mail address.  
To send the message to more than one  
recipient, fill in additional destination  
fields.  
Multimedia message (Menu 5.1.2)  
Multimedia Message Service (MMS) delivers  
messages containing a combination of text,  
image, video, and audio, from phone to  
phone or from phone to e-mail.  
7. Press [OK] to send the message.  
52  
     
Using options while composing an MMS  
message  
Move page: move the current page  
backward or forward to change the page  
order.  
While composing a message, press  
Delete page: delete a page.  
<
Options> to access the following options:  
Input: add the message text.  
Add: add a media file.  
Edit style: change the page properties.  
This page: set the page duration and  
change font colour and style for the  
selected page.  
Send: send the message.  
Preview: view the message as it will be  
shown on the recipient’s phone.  
All page: change the background colour  
and page layout.  
Edit text  
text, image, video, or sound clip.  
Delete text Delete file: delete the  
/Change file: edit the added  
Save as template: save the message  
as a template in the Multimedia  
templates folder.  
/
added text, image, video, or sound clip.  
File messenger (Menu 5.1.3)  
Input method: change the text input  
mode.  
Use this menu to send multiple media files  
by attaching them to an MMS message.  
Input language: change the language  
to be used in T9 input mode.  
Creating and sending an MMS message  
with files  
Insert text template: insert a text  
template into the subject or text.  
1. Enter the message subject.  
Save to Drafts: save the message in  
the Drafts folder.  
You can use various options by pressing  
<Options> in each field.next section  
Add page: add pages. Move to each  
page by pressing [Left] or [Right].  
2. Move to the Message field.  
3. Enter the message text.  
53  
     
Menu functions  
4. Move to the Attach files line.  
Insert: insert a text template, Contacts  
entry, or bookmarked URL address into  
text.  
5. Press <Options> and select Add files  
,
Add name card, or Add v-calendar  
.
Attached file list: access the list of the  
files you attached.  
6. Add images, videos, sounds, name  
cards, or calendar data.  
Add files: attach images, videos, and  
sounds.  
7. When you have finished, press [OK].  
8. Enter a phone number or e-mail address.  
Add name card: attach a Contacts  
entry as a name card.  
To send the message to more than one  
recipient, fill in additional destination  
fields.  
Add v-calendar: attach calendar data  
as a data format attachment.  
9. Press [OK] to send the message.  
Delete all attachments: delete all  
attachments.  
Using options while composing an MMS  
message with files  
Save to Drafts: save the message in  
the Drafts folder.  
While composing a message, press  
<Options> to access the following options:  
Email (Menu 5.1.4)  
Send: send the message.  
You can send and receive e-mails that  
include text, audio, and images. To use this  
feature, you need to subscribe to an e-mail  
service and set up your e-mail account.  
Input method: change the text input  
mode.  
Input language: change the language  
to be used in T9 input mode.  
p. 66  
Insert text template: insert a text  
template into the message subject.  
54  
 
Creating and sending an e-mail  
You can create and send e-mails.  
1. Enter the e-mail subject.  
Using options while composing an  
e-mail  
While composing an e-mail, press  
<Options> to access the following options:  
You can use various options by pressing  
Send: send the e-mail.  
<Options> in each field.next section  
Input method: change the text input  
mode.  
2. Move to the Message field.  
3. Enter the e-mail text.  
Input language: change the language  
to be used in T9 input mode.  
4. Move to the Attach files line.  
5. Press <Options> and select Add files  
,
Insert text template: insert a text  
template into the e-mail subject.  
Add name card, or Add v-calendar  
.
6. Add images, videos, sounds, name  
cards, or calendar data.  
Insert: insert a text template, Contacts  
entry, or bookmarked URL address into  
text.  
7. When you have finished, press [OK].  
8. Enter an e-mail address.  
Attached file list: access the list of the  
files you attached.  
To send the e-mail to more than one  
recipient, fill in additional destination  
fields.  
Add files: attach images, videos, and  
sounds.  
9. Press [OK] to send the e-mail.  
Add name card: attach a Contacts  
entry as a name card.  
Add v-calendar: attach calendar data  
as a data format attachment.  
55  
 
Menu functions  
Delete all attachments: delete all  
attachments.  
• Depending on the DRM (Digital Rights  
Management) system, messages having  
web content may not be able to be  
forwarded.  
Save to Drafts: save the e-mail in the  
Drafts folder.  
• A  
!
icon next to a message means that the  
message is of high priority.  
A grey-coloured message icon indicates  
low priority.  
Inbox (Menu 5.2)  
This folder stores all types of messages you  
have received, except for e-mails.  
Using message options  
Viewing a message  
While viewing a message, press <Options  
>
to access the following options:  
The following icons may appear on the list to  
show the message type:  
SMS messages  
SMS message  
Call/Go to URL/Go to RTSP: dial the  
highlighted phone number or access the  
highlighted web link.  
MMS message  
MMS notification  
Add to bookmark: save the highlighted  
web link to the bookmark list.  
Push message from web servers  
Configuration message, containing  
network parameters from your service  
provider  
Create email: send an e-mail to the  
highlighted e-mail address.  
Create multimedia message: send an  
MMS message to the highlighted phone  
number or e-mail address.  
Reply: reply to the sender via SMS,  
MMS, or File messenger.  
56  
     
Forward: forward the message to other  
people.  
Reply: reply to the sender via SMS,  
MMS, or File messenger.  
Call back: dial the phone number of the  
sender.  
Reply to all: send a reply to the sender  
and all recipients.  
Save to Contacts: save the sender’s  
phone number to Contacts. If a phone  
number, e-mail address, or URL address  
within the message is selected, you can  
also save it to Contacts.  
Forward: forward the message to other  
people.  
Call back: dial the phone number of the  
sender.  
Save as template: save the message  
as a template in the Multimedia  
templates folder.  
Move to SIM/Move to phone: move  
the message between the phone’s  
memory and the USIM/SIM card.  
Save files: save media items from the  
message into your phone’s memory.  
Delete: delete the message.  
MMS messages  
Save to Contacts: save the sender’s  
phone number to Contacts. If a phone  
number, e-mail address, or URL address  
within the message is selected, you can  
also save it to Contacts.  
Play: play the message.  
Call Go to URL Go to RTSP: dial the  
/
/
highlighted phone number or access the  
highlighted web link.  
Delete: delete the message.  
Add to bookmark: save the highlighted  
web link to the bookmark list.  
Details: access the message properties.  
Create email: send an e-mail to the  
highlighted e-mail address.  
Push messages  
Go to URL/Go to RTSP: connect to the  
URL specified in the message.  
Create multimedia message: send an  
MMS message to the highlighted phone  
number or e-mail address.  
Delete: delete the message.  
57  
           
Menu functions  
Configuration messages  
Sort by: change the sort order of the  
message list.  
Install: apply the configuration value in  
the message to the phone.  
Delete: delete the selected message.  
Delete: delete the message.  
Delete all: delete all messages.  
Delivery reports  
Outbox (Menu 5.4)  
Call back: dial the phone number of the  
This folder stores messages that the phone  
is attempting to send or has failed to send.  
recipient.  
Save to Contacts: save the sender’s  
phone number to Contacts. If a phone  
number, e-mail address, or URL address  
within the report is selected, you can  
also save it to Contacts.  
The following icons on the message list  
indicates the sending status:  
: Being sent  
: Failed to be sent  
Delete: delete the report.  
From the message list, press <Options> to  
access the following options:  
Drafts (Menu 5.3)  
View: open the selected message.  
Send again: resend the message.  
Edit: edit the message.  
This folder stores messages you have saved  
to send them at a later time.  
From the message list, press <Options> to  
access the following options:  
Cancel sending: cancel sending the  
message.  
View: open the selected message.  
Edit: edit the message.  
Sort by: change the sort order of the  
message list.  
Send: send the message.  
Delete: delete the selected message.  
58  
       
Delete all: delete all messages.  
Viewing an e-mail  
1. Press <Options> and select Download.  
Details: access the message properties.  
The phone checks the e-mail server and  
downloads new e-mails.  
Sent box (Menu 5.5)  
The following icons may appear on the  
list to show the e-mail status:  
This folder stores messages that you have  
sent.  
: Retrieved e-mail  
: Retrieved e-mail with  
attachments  
From the message list, press <Options> to  
access the following options:  
View: open the selected message.  
: E-mail not retrieved  
Forward: forward the message to other  
• Depending on the DRM (Digital Rights  
Management) system, messages having  
web content may not be able to be  
forwarded.  
people.  
Sort by: change the sort order of the  
message list.  
• A icon next to a message means that the  
!
Delete: delete the selected message.  
Delete all: delete all messages.  
message is of high priority.  
A grey-coloured message icon indicates  
low priority.  
Details: access the message properties.  
2. Select an e-mail or a header.  
Email inbox (Menu 5.6)  
3. If the e-mail has more than one page,  
press [ / ] to scroll through pages one  
by one.  
This folder stores e-mails that you have  
received.  
4. Select an attached file to view or play it.  
59  
     
Menu functions  
Block: add the sender’s e-mail address  
or e-mail subject to the Block list to  
reject e-mails from that address or  
containing that subject.  
Using e-mail options  
While viewing the e-mail or header, press  
<Options> to access the following options:  
View: open the selected e-mail.  
Delete from phone: delete the selected  
e-mail or all e-mails from the phone’s  
memory.  
Retrieve: retrieve the body of the  
selected e-mail header from the e-mail  
server.  
Delete permanently: delete the  
selected e-mail or all e-mails from both  
the phone’s memory and the e-mail  
server.  
Reply: send a reply to the sender.  
Reply to all: send a reply to the sender  
and all recipients.  
Forward: forward the e-mail to other  
people.  
Email accounts: change the active  
e-mail account.  
Download: download new e-mails or  
headers from the e-mail server.  
Details: access the e-mail properties.  
Media Album (Menu 5.7)  
Sort by: change the sort order of the  
e-mail list.  
Use this menu to access the Media Album  
service, with which you can organise your  
own online media album, adding media  
content and messages via the wireless web.  
This menu is only available if supported by  
your service provider.  
Save files: save the selected file.  
Save to Contacts: save the sender’s  
e-mail address to Contacts. If a phone  
number, e-mail address, or URL address  
within the e-mail is selected, you can  
also save it to Contacts.  
60  
     
Multimedia templates (Menu 5.8.2)  
Templates (Menu 5.8)  
You can create MMS templates so that you  
can use them in composing an MMS  
message.  
Use this menu to create, edit, and send text  
templates and MMS templates.  
Text templates (Menu 5.8.1)  
Creating a template  
You can create SMS templates with the  
sentences you use frequently so that you  
can retrieve and insert them when  
composing an SMS message.  
1. Press <New>, or press <Options> and  
select New, if one has been already  
stored.  
2. Create a template as you would when  
creating an MMS message.  
Creating a template  
1. Press <New>, or press <Options> and  
select New, if one has been already  
stored.  
3. Press <Options> and select Save as  
template to save the template.  
Using template options  
2. Enter a message and press [OK].  
From the template list, press <Options> to  
access the following options:  
Using template options  
From the template list, press <Options> to  
access the following options:  
View: open the selected template.  
Send: send the selected template.  
New: add a new template.  
Send: create and send a new message  
using the template via SMS, MMS, File  
messenger, or e-mail.  
Edit: edit the selected template.  
Delete: delete the template.  
Delete all: delete all templates.  
New: add a new template.  
Edit: edit the selected template.  
Delete: delete the selected template.  
Delete all: delete all templates.  
61  
 
Menu functions  
Broadcast (Menu 5.9)  
Delete all (Menu 5.0)  
Your phone receives broadcast messages,  
which are text messages related to various  
topics, such as weather forecast, traffic, and  
news report, from networks. Use this menu  
to access received broadcast messages.  
Use this menu to delete all of the messages  
in each message type at once.  
1. Press [OK] to select the message types  
you want.  
2. Press <Delete>.  
Viewing a broadcast message  
3. Press <Yes> to confirm the deletion.  
All broadcast messages are stored in the  
Temporary folder and will be deleted after  
a period of time. If you do not want a  
message to be deleted, save it to the  
Archive folder. While viewing the message,  
Settings (Menu 5.*)  
Use this menu to set up various options for  
using the messaging services.  
Text message (Menu 5.*.1)  
press <Options> and select Save  
.
You can configure default SMS settings.  
Using message options  
Settings x (where  
number): set the properties of each  
profile:  
x
is the setting profile  
While viewing a message, press <Options  
to access the following options:  
>
Call/Go to URL/Go to RTSP: dial the  
highlighted phone number or access the  
highlighted web link.  
Centre address: store or change the  
number of your SMS server.  
Expiration: set the length of time your  
messages are stored in the SMS server.  
Create email: send an e-mail to the  
highlighted e-mail address.  
Default type: set the default message  
type. The network can convert messages  
into the selected format.  
Save: save the message in the Archive  
folder.  
Delete: delete the message.  
62  
           
Name: enter a profile name.  
Multimedia message (Menu 5.*.2)  
Sending settings: set up the options  
for sending SMS messages:  
You can configure default MMS settings.  
Sending options: set up the options for  
sending MMS messages:  
Reply path: allow recipients to reply to  
you through your SMS server.  
Priority: set the priority level of your  
Delivery report: set the network to  
inform you when your messages are  
delivered.  
messages.  
Expiration: set the length of time your  
messages are stored in the MMS server.  
Network selection: select CS  
preferred (GSM) or PS preferred  
(GPRS), depending on your network.  
Custom time(Hour): enter the length  
of time you want if you select Custom  
time in the Expiration option.  
Keep a copy: leave copies of your  
messages in the Sent box folder after  
sending.  
Delivery: set a time delay before  
messages are sent.  
Custom time(Hour): enter the length  
of time you want if you select Custom  
time in the Delivery option.  
Character support: select a character  
encoding type. When you select  
Automatic, the phone switches the  
encoding type from GSM alphabet to  
Unicode if you enter an Unicode  
character. Use of Unicode encoding will  
reduce the maximum number of  
characters in a message to about half. If  
this menu is not shown, your phone  
provides the automatic character  
encoding by default.  
Hide address: set your address to be  
hidden from the recipient’s phone.  
Request delivery report: set the  
network to inform you when your  
messages are delivered.  
Request read report: send a read-  
replay request along with your  
messages.  
63  
 
Menu functions  
Keep a copy: leave copies of your  
messages in the Sent box folder after  
sending.  
-
-
Manual: the phone receives  
notifications first from the server. Use  
the Retrieve option to manually  
retrieve new messages.  
Add my name card: allow your contact  
information to be attached to your  
messages via File messenger.  
Restricted: (Roaming network only)  
the phone receives notifications first  
from the server. When you attempt to  
retrieve new messages, the phone  
informs you of additional charges.  
Add signature: allow your signature to  
be attached to your messages via File  
messenger.  
-
Reject: the phone rejects all  
messages.  
Input signature: enter your signature.  
Receiving options: set up the options  
for receiving MMS messages:  
Send delivery report: set the network  
to inform the sender when messages are  
delivered to you.  
Home network: determine if your  
phone retrieves new messages  
automatically when you are in your  
home service area.  
Send read report: determine whether  
or not the phone sends a read-reply  
when an incoming message has been  
read.  
Roaming network: determine if your  
phone retrieves new messages  
automatically when you are roaming in  
another network.  
Reject anonymous: reject messages  
from unknown senders.  
Reject advertisement: reject  
advertisements.  
Reception within your home network or  
while roaming has the following options:  
MMS profiles: select a connection  
profile to be used for MMS. You can also  
-
Auto download: the phone  
automatically retrieves messages from  
the server.  
create or edit a profile.p. 97  
64  
Message size: select a maximum file  
size of allowed for messages. Available  
message size may vary, depending on  
your country.  
Sending options: set up the options for  
sending e-mails:  
From: set the sender name.  
Sending account: select the default  
account.  
Creation mode: select an MMS creation  
mode:  
Priority: select the priority level of  
e-mails.  
Restricted: you can create a message  
with the type of content and size.  
Keep a copy: leave copies of your  
e-mails in the Sent box folder after  
sending.  
Warning: you can create a message  
with any type of content and of any size,  
but the phone will inform you when the  
content and size exceed the maximum.  
Include body when replying: set  
whether or not the phone includes the  
original e-mail text in a reply.  
Free: you can create a message with  
any type of contents and of any size.  
Delivery report: set the network to  
inform you when your e-mails are  
delivered.  
Slide interval: select the length of time  
the display shows each page in a  
message.  
Add my name card: allow your contact  
information to be attached to e-mails.  
Email (Menu 5.*.3)  
Add signature: attach your signature to  
e-mails.  
You can configure default e-mail settings.  
You cannot change e-mail profile and account  
settings while an e-mail is being sent or  
retrieved.  
Input signature: enter your signature.  
65  
 
Menu functions  
Receiving options: set up the options  
for receiving e-mails:  
Email accounts: set up an e-mail  
account and select an account to be  
used. Press <Options> and select Edit  
to access the following options for  
setting up an account:  
Set download limit: determine the  
maximum size for incoming e-mails. Your  
phone will reject e-mails that exceed the  
specified size.  
Account name: enter a name for the  
currently selected account.  
Auto polling: set the phone to  
automatically check the e-mail server to  
download e-mails at the specified  
intervals.  
SMTP server: enter the IP address or  
host name of the outgoing e-mail server.  
SMTP port: enter the SMTP port  
Polling frequency: set how often the  
phone checks the e-mail server for  
automatic polling.  
number.  
Use SSL: activate the use of the SSL  
(Secure Sockets Layer) protocol.  
Block address: specify e-mail  
addresses to reject e-mails from those  
addresses, and activate or deactivate  
mail blocking.  
Retrieving server type: select the  
protocol for the incoming e-mail server.  
The remaining options depend on the  
protocol type setting.  
Block subject: specify subjects to reject  
e-mails which contain those subjects you  
specify, and activate or deactivate mail  
blocking.  
POP3 server/IMAP4 server: enter the  
IP address or host name of the POP3 or  
IMAP4 server.  
POP3 port/IMAP4 port: enter the  
POP3 or IMAP4 port number.  
Email profiles: select a network  
connection profile to be used for e-mail  
services. You can also create or edit a  
Use SSL: activate the use of the SSL  
(Secure Sockets Layer) protocol.  
profile.  
p. 97  
66  
 
IMAP4 retrieving option: (IMAP4  
protocol only) set whether the phone  
retrieves only new messages or all  
messages.  
Voice mail (Menu 5.*.4)  
Use this menu to set the number of your  
voicemail server.  
You must store the voicemail server number  
before accessing the server. Your service  
provider can give you the number.  
Retrieving option: set whether the  
phone downloads e-mail headers only or  
the complete e-mail.  
Push message (Menu 5.*.5)  
Keep in server: leave copies of e-mails  
on the e-mail server after retrieving.  
You can determine whether or not your  
phone receives push messages.  
My address: set your e-mail address.  
User name: enter the POP3 or IMAP4  
user name.  
Broadcast (Menu 5.*.6)  
You can change the settings for receiving  
broadcast messages.  
Password: enter the POP3 or IMAP4  
password.  
Receive: select whether or not the  
Use SMTP authentication: enable  
SMTP authentication, which requires the  
user to log in before sending e-mails.  
phone receives broadcast messages.  
Channel: indicate the channels from  
which you wish to receive broadcast  
messages. Please contact your service  
provider for further details.  
Same as POP3/IMAP4: select if you  
want the SMTP server to have the same  
parameters as the POP3 or IMAP4 server.  
Language: select the preferred  
languages in which broadcast messages  
display.  
User name: enter the SMTP user name.  
Password: enter the SMTP password.  
67  
     
Menu functions  
Note the following icons on the list:  
Memory status (Menu 5.#)  
: Forwardable item with a valid key.  
: Forwardable item without a valid  
Use this menu to view the number of  
messages or the amount of memory  
currently in use for each message type.  
key.  
key.  
key.  
: Unforwardable item with a valid  
: Unforwardable item without a valid  
File manager (Menu 6)  
The File manager menu allows you to  
access images, videos, music files, and  
sounds stored in the phone’s memory or on  
a memory card.  
Your service provider supports only  
count-based or unlimited-access DRM files.  
Images  
To access this menu, press [OK] in Idle  
mode and select File manager  
.
Use this menu to access photos you have  
taken and images you have downloaded,  
received in messages, or imported from your  
computer.  
Tips for Digital Rights Management  
As a result of the Digital Rights Management  
(DRM) system, some of the media items you  
download from the Internet or receive by  
MMS may require a licence key to access  
them. You can acquire the key from the  
website which owns the rights to the  
Viewing an image  
1. Scroll to an image folder.  
2. Select an image.  
content; use the Activate key option.  
Viewing a slide show  
You can view your images as a slide show, a  
sequential presentation of each image in the  
current folder.  
68  
           
1. Select an image folder.  
2. Select an image.  
Flip: flip the photo vertically or  
horizontally.  
Crop: select a variously sized and  
shaped section of the photo.  
3. Press <Options> and select Slide  
show. The slide show begins.  
4. When you have finished, press <Done>,  
4. Press <Back> to stop the slide show.  
or press <Options> and select Done  
.
Editing an image  
1. Select an image from the Pictures  
5. Press [OK].  
6. Enter a photo name and press <Save>.  
folder.  
Using image options  
2. Press <Options> and select Edit  
.
While viewing an image, press <Options  
to access the following options:  
>
3. Press <Options> and edit the photo  
using the following options:  
Send: send the file via MMS, e-mail, File  
messenger, or Bluetooth.  
Visible to Bluetooth Hidden from  
Bluetooth: share the file with other  
Bluetooth devices, or hide the file so that  
other Bluetooth devices cannot access it.  
Save as: save the file as a different  
name.  
/
Resize: change the image size.  
Effects: change the colour tone or  
apply a special effect to the photo.  
Adjust: adjust the brightness,  
contrast, or colour balance.  
Frames: apply a decorative frame.  
Cliparts: add an image clip to the  
photo.  
Activate key: get a new licence key  
when the key for the selected DRM file  
expires.  
Reactivate key: get another licence key  
even when the key for the selected DRM  
file has not expired.  
Insert text: add text to the photo.  
Rotate: rotate the photo clockwise  
or counterclockwise.  
69  
 
Menu functions  
Set as: set the image as wallpaper for  
the displays or a caller ID image for a  
Contacts entry.  
Videos  
Use this menu to access video clips you have  
recorded, downloaded, received in  
messages, or imported from your computer.  
Move: move the file to another folder.  
Copy: copy the file to another folder.  
Video clips recorded on other devices, such  
as camcorders, may not play correctly.  
Real size: view the image in its actual  
size. Press <Phone size> to fit the  
image to the display.  
Playing a video clip  
1. Scroll to a video folder.  
Slide show: view all images as a slide  
show.  
2. Select a video clip. The media player  
opens.p. 43  
Edit: edit the image and save it as a  
different file.  
Using video options  
Delete: delete the file.  
From the video list, press <Options> to  
Rename: change the file name.  
Details: access the file properties.  
access the following options:  
Play: play the selected file.  
Key management: manage licence  
keys you have acquired.  
Add to play list: add the file to the play  
list.  
Send: send the file via MMS, e-mail, File  
messenger, or Bluetooth.  
Downloading images  
1. Scroll to the Downloads folder.  
Visible to Bluetooth/Hidden from  
2. Select More pictures. You are  
connected to the website preset by your  
service provider.  
Bluetooth: share the file with other  
Bluetooth devices, or hide the file so that  
other Bluetooth devices cannot access it.  
3. Search for the file you want and follow  
the onscreen instructions to download it.  
70  
     
Activate key: get a new licence key  
when the key for the selected DRM file  
expires.  
Downloading video clips  
1. Scroll to the Downloads folder.  
2. Select More videos. You are connected  
to the website preset by your service  
provider.  
Reactivate key: get another licence key  
even when the key for the selected DRM  
file has not expired.  
3. Search for the file you want and follow  
the onscreen instructions to download it.  
Move: move the file to another folder.  
Copy: copy the file to another folder.  
Music  
Delete: delete the selected file or all  
files.  
This menu displays music files you have  
downloaded, received in messages, or  
imported from your computer.  
Rename: change the file name.  
Lock/Unlock: lock the file to prevent it  
from being deleted, or unlock the file.  
Playing a music file  
New folder: add a new folder.  
Select a music file. The media player opens.  
Details: access the file properties.  
p. 43  
Memory status: access the memory  
information for each folder in File  
Using music options  
From the music list, press <Options> to  
access the following options:  
manager  
.
Key management: manage licence  
keys you have acquired.  
Play: play the selected file.  
Add to play list: add the file to the play  
list.  
Send: send the selected file via MMS,  
e-mail, File messenger, or Bluetooth.  
71  
   
Menu functions  
Visible to Bluetooth  
/
Hidden from  
Memory status: access the memory  
information for each folder in File  
Bluetooth: share the file with other  
Bluetooth devices, or hide the file so that  
other Bluetooth devices cannot access it.  
manager  
.
Key management: manage licence  
Activate key: get a new licence key  
when the key for the selected DRM file  
expires.  
keys you have acquired.  
Downloading music files  
1. Select More music. You are connected  
to the website preset by your service  
provider.  
Reactivate key: get another licence key  
even when the key for the selected DRM  
file has not expired.  
2. Search for the file you want and follow  
the onscreen instructions to download it.  
Set as ringtone: set the file as your  
ringtone for voice calls or video calls.  
Set as caller ID: set the file as a  
ringtone for a Contacts entry.  
Sounds  
Use this menu to access voice memos you  
have recorded, and sound clips you have  
downloaded, received in messages, or  
imported from your computer.  
Move: move the file to another folder.  
Copy: copy the file to another folder.  
Delete: delete the selected file or all  
files.  
Playing a sound clip  
1. Select a sound folder.  
2. Select a sound clip.  
Rename: change the file name.  
Lock/Unlock: lock the file to prevent it  
from being deleted, or unlock the file.  
For a voice memo, see Voice  
New folder: add a new folder.  
recorder.p. 45  
Details: access the file properties.  
72  
 
During playback, use the following keys:  
Set as caller ID: set the file as a  
ringtone for a Contacts entry.  
Key  
Left  
Function  
Details: access the file properties.  
Returns to the previous file.  
Skips to the next file.  
Downloading sound clips  
1. Scroll to the Ringtones folder.  
Right  
Up/Down/ Adjusts the volume.  
/
2. Select More ringtones. You are  
connected to the website preset by your  
service provider.  
OK  
Allows you to send the  
selected file to other people.  
3. Search for the file you want and follow  
the onescreen instructions to download  
it.  
Using sound options  
While playing a sound clip, press  
Games & More  
<Options> to access the following options:  
Use this menu to access the embedded Java  
games and downloaded Java applications.  
Send: send the file via MMS, e-mail, File  
messenger, or Bluetooth.  
Accessing a game  
Visible to Bluetooth/Hidden from  
Bluetooth: share the file with other  
Bluetooth devices, or hide the file so that  
other Bluetooth devices cannot access it.  
Select a game from the game list and follow  
the onscreen instructions. The procedure  
may differ from game to game.  
Delete: delete the file.  
Using Java application options  
Rename: change the file name.  
From the application list, press <Options  
to access the following options:  
>
Set as ringtone: set the file as your  
ringtone for voice calls or video calls.  
Play: launch the selected application.  
73  
 
Menu functions  
Activate key: get a new licence key  
when the key for the selected DRM file  
expires.  
Network settings: select a connection  
profile to be used for applications  
requiring network access. You can also  
create or edit a profile.p. 97  
Reactivate key: get another licence key  
even when the key for the selected DRM  
file has not expired.  
Memory status: access memory  
information for each folder in File  
manager  
.
Move: move the application to another  
folder.  
Downloading applications  
Delete: delete the selected application  
or application folder, except for  
embedded applications and default  
application folders.  
1. Select More games. You are connected  
to the website preset by your service  
provider.  
2. Search for the application you want and  
follow the onscreen instructions to  
download it.  
Rename: change the name of the  
application or application folder.  
Lock/Unlock: lock the application to  
Other files  
prevent it from being deleted, or unlock  
the application.  
Files that you have received but which are  
not supported by your phone are stored in  
this folder. You cannot open these files on  
the phone. Unsupported file formats include  
*.doc, *.ppt, *.txt, and so on.  
Details: access the application  
properties.  
Key management: manage licence  
keys you have acquired.  
New folder: add a new folder.  
From the file list, press <Options> to  
access the following options:  
Send: send the file via e-mail or  
Bluetooth.  
74  
 
Visible to Bluetooth/Hidden from  
Organiser (Menu 7)  
The Organiser menu enables you to keep  
track of your schedule or set alarms.  
Bluetooth: share the file with other  
Bluetooth devices, or hide the file so that  
other Bluetooth devices cannot access it.  
To access this menu, press [OK] in Idle  
Move: move the file to another folder.  
mode and select Organiser  
.
Copy: copy the file to another folder.  
Delete: delete the selected file or all  
files.  
Alarms (Menu 7.1)  
Use this menu to set alarms to sound at  
specific times. The alert type for a normal  
alarm corresponds to the call alert type  
settings in the currently selected profile. A  
wake-up alarm is not be affected by your  
profile setting.  
Rename: change the file name.  
Lock/Unlock: lock the file to keep it  
from being deleted, or unlock the file.  
New folder: add a new folder.  
Details: access the file properties.  
Memory status: access memory  
information for each folder in File  
Setting an alarm  
1. Select the type of alarm.  
2. Set each alarm option:  
manager  
.
Alarm: activate the alarm.  
Time: enter the time for the alarm to  
sound.  
Repeat: select a repeat option.  
Alert tone: select an alarm tone.  
Memory card  
Use this menu to access the media files  
stored on the memory card. This option is  
only available when you insert a memory  
card into the phone.  
3. Press <Options> and select Save  
.
For details about using files, see the  
corresponding menu.  
75  
       
Menu functions  
Stopping an alarm  
Calendar (Menu 7.2)  
When the time for an alarm comes and the  
alarm sounds:  
Use this menu to keep track of your  
schedule.  
For a non-wake-up alarm, press any key.  
Selecting a day on the calendar  
For a wake-up alarm, press <OK> or  
When you enter the Calendar menu, the  
calendar appears with today’s date indicated  
by a coloured box.  
[OK].  
Press <Snooze> to cause it to sound  
again after 5 minutes.  
Press [Left] or [Right] to move by day.  
Press [Up] or [Down] to move by week.  
Press [ / ] to move by month.  
Press any key, except for <OK>, [OK],  
and <Snooze>, to mute the alarm tone.  
Deactivating an alarm  
Creating an item  
1. Select the alarm you want to deactivate.  
2. Select Off on the Alarm line.  
3. Press [OK].  
You can store appointments, anniversaries,  
tasks, and memos on the calendar. More  
than one item per day can be stored.  
Setting alarms to sound when the  
phone is off  
Entering an appointment  
1. Select a date on the calendar.  
From the Alarms screen, select Auto power  
2. Press <Options> and select New  
Schedule  
3. Enter information or change the settings:  
On.  
.
If the phone is off when it is time for the  
alarm to sound, the phone switches on and  
sounds the alarm.  
Title: enter the title for the  
appointment.  
76  
 
Details: enter the details of the  
appointment.  
Start and End: enter the starting  
and ending times for the  
appointment.  
Start date and End date: enter the  
starting and ending dates for the  
appointment.  
Location: enter information about  
the appointment.  
Alarm: set an alarm for the  
appointment.  
before: set how long before the  
appointment the alarm is to alert  
you.  
Repeat: set the appointment to  
recur. You can select a repeat unit.  
until: set the ending date, if the  
appointment will recur.  
Entering an anniversary  
1. Select a date on the calendar.  
2. Press <Options> and select New  
Anniversary  
.
3. Enter information or change the settings:  
Occasion: enter information about  
the anniversary.  
Date: enter the date.  
Alarm: set an alarm for the  
anniversary.  
before: set how long before the  
anniversary the alarm is to alert you.  
alarm time: enter the time for the  
alarm to sound.  
Repeat every year: set the phone  
to remind you of the anniversary  
every year.  
4. Press <Options> and select Save to  
save the anniversary.  
Expiry: change the expiry setting.  
4. Press <Options> and select Save to  
save the appointment.  
77  
Menu functions  
Entering a task  
Consulting the calendar  
1. Select a date on the calendar.  
2. Press <Options> and select New  
Once you have scheduled items, the square  
brackets appear on the corner of the date  
cell.  
Task  
.
3. Enter information or change the settings:  
Viewing an item  
Title: enter the title for the task.  
Task: enter the task content.  
Start date: enter the starting date.  
Due date: enter the ending date.  
Priority: select a priority level.  
1. Select a date on the calendar to display  
the items for the day.  
The following icons indicate the type of  
item:  
Appointments  
Anniversaries  
Tasks  
4. Press <Options> and select Save to  
save the task.  
Memos  
Entering a memo  
2. Select an item to view its details.  
1. Select a date on the calendar.  
From the item list, press <Options> to  
access the following options:  
2. Press <Options> and select New  
Memo  
.
View: access the item.  
3. Enter the memo text and press [Down].  
4. Enter the date.  
New: add a new item.  
Completed/To do: change the status of  
the selected task.  
5. Press <Options> and select Save to  
save the memo.  
Month view: switch to the monthly view  
screen.  
78  
Week view: switch to the weekly view  
screen.  
Start date: set whether the calendar  
starts with Sunday or Monday.  
Change date  
/
Change due date  
/
Delete: delete the items for the specific  
period.  
Reschedule: change the date of the  
item.  
Delete all: delete all of the items on the  
Delete: delete the selected item.  
calendar.  
Delete all: delete all of the items for the  
selected day.  
Week view (Menu 7.3)  
You can view items for the selected week. A  
cell on the timetable indicates the presence  
of a scheduled item. Select a cell for the  
date you want.  
Send schedule/Send task: send the  
item via SMS, e-mail, File messenger, or  
Bluetooth.  
Send memo: send the memo via SMS.  
Using calendar options  
Today’s events (Menu 7.4)  
On the calendar, press <Options> to access  
the following options:  
You can view items for the selected date.  
Select an item to view its details. The item  
opens in Edit mode.  
View: display the items stored for the  
selected date.  
New: add a new item.  
Schedule (Menu 7.5)  
Week view: display the weekly view  
screen.  
This menu displays the scheduled  
appointments. If you have set the Repeat  
and Alarm options, the  
display.  
Go to today: go to today’s date.  
and  
icons  
Go to date: enter the specific date you  
want to access.  
Select an appointment to view its details.  
79  
     
Menu functions  
Anniversary (Menu 7.6)  
Missed event alarm (Menu 7.9)  
This menu displays anniversaries you have  
created. If you have set the Repeat and  
When you are unable to acknowledge an  
alarm for an appointment or anniversary,  
the phone stores the alarm until you confirm  
it.  
Alarm options, the  
and  
icons display.  
Select an anniversary to view its details.  
1. Select an item.  
Task (Menu 7.7)  
2. Press <Confirm> to confirm and delete  
the item.  
Use this menu to display tasks you have  
created. The icons on the right indicate the  
importance; the lower the number on the  
icon, the higher the priority. A check mark  
appears in the status check box if the task  
has been completed.  
Memory status (Menu 7.0)  
Use this menu to access memory  
information for the items stored on the  
calendar.  
Select a task to view its details.  
Memo (Menu 7.8)  
This menu displays memos you have  
created.  
Select a memo to view its details.  
80  
         
1. Access the Camera menu to turn on the  
Camera (Menu 8)  
You can use the camera module embedded  
in your phone to take photos and record  
videos.  
camera and switch the display to Capture  
mode. You can also press and hold [  
in Idle mode.  
]
2. Press [ ] to switch between the front  
camera lens and rear camera lens.  
To access this menu, press [OK] in Idle  
mode and select Camera, or press and hold  
3. Make any desired adjustments.  
[
].  
Press <  
> to use camera options.  
• Do not take photos of people without their  
permission.  
• Do not take photos in a place where  
cameras are not allowed.  
• Do not take photos in a place where you  
may interfere with another person’s  
privacy.  
next section  
Use the keypad to change the camera  
settings or switch to other modes.  
p. 83  
4. Press [OK] to take a photo. The photo is  
saved in the Pictures folder.  
5. To  
use photo  
Press  
Taking a photo  
You can take photos in various modes. The  
camera produces JPEG photos.  
< > or  
Options>.  
options  
<
p. 84  
When you take a photo in direct sunlight or  
in bright conditions, shadows may appear on  
the photo.  
delete the photo  
[
C
] and then <Yes>.  
send the photo  
via MMS  
[OK]. p. 52  
return to Capture <  
mode  
> or <Back>.  
81  
     
Menu functions  
Effects: change the colour tone or apply  
a special effect.  
Using camera options in Capture  
mode  
Frames: apply a decorative frame.  
In Capture mode, press <  
following options:  
> to access the  
Timer: set a time delay before the  
camera takes a photo.  
Take photo: take a photo.  
Zoom/Hide zoom: display the zoom  
Record video: switch to Record mode.  
control bar and zoom in or out by  
pressing [Up] or [Down], or hide the  
control bar.  
Switch camera: switch between the  
front camera lens and rear camera lens.  
Go to Photos: access the Pictures  
folder.  
Brightness/Hide brightness: display  
the brightness control bar and adjust the  
brightness by pressing [Left] or [Right],  
or hide the control bar.  
Shooting mode: take a photo in the  
following modes:  
Single shot: take a photo in Normal  
mode. You can select whether or not the  
camera automatically saves a photo.  
Camera settings: change the default  
settings for taking a photo:  
Default name: change the default  
prefix of file names.  
Multi shot: take a series of action stills.  
You can select the number of photos the  
camera will take.  
Default storage: select the memory  
location to store photos, if a memory  
card is inserted.  
Mosaic shot: take several stills and  
save them in one frame. You can select  
the layout.  
Viewfinder: select a preview screen.  
82  
 
Shutter sound: select the sound that  
you hear when you press the shutter  
release.  
Using the keypad in Capture mode  
You can use the keypad to customise your  
camera settings in Capture mode.  
Capture quality: select an image  
quality.  
Key  
Function  
Left/Right Adjusts the brightness.  
Image size: select an image size.  
Multi shot speed: select the shooting  
speed in Multi Shot mode.  
Up/Down  
Zooms in or out. (Not  
available for the maximum  
size)  
Spot metering: adjust the exposure  
based on a specific area of the image.  
Select On to display the spot focus frame  
in the middle of the image, and change  
the exposure according to the brightness  
of the image fragment in the frame.  
Flips the image vertically.  
Shows the mirror image.  
Switches to Record mode.  
Changes the image size.  
Changes the image quality.  
Changes the shooting mode.  
1
2
3
4
5
White balance: adjust the colour  
balance of the photo. You can make your  
photo appear warmer or cooler.  
Camera shortcuts: view the functions  
of the keys you can use in Capture  
mode.  
Changes the colour tone or  
applies a special effect.  
7
8
Adds a decorative frame.  
Sets the timer.  
83  
 
Menu functions  
Recording a video  
Key  
0
Function  
You can record a video of what is displayed  
on the camera screen and save it.  
Goes to the Pictures folder.  
Changes the preview mode.  
1. Access the Camera menu to turn on the  
camera or press and hold [ ] in Idle  
mode.  
Using photo options  
After saving a photo, press <  
> or  
2. Press [1] to switch to Record mode.  
<Options> to access the following options:  
3. Press [ ] to switch between the front  
camera lens and rear camera lens.  
View: access one of the multi-shot  
photos.  
4. Make any desired adjustments.  
Send: send the file via MMS, e-mail, File  
messenger, or Bluetooth.  
Press <  
> to use camera options.  
next section  
Viewfinder: return to Capture mode.  
Use the keypad to change the camera  
settings or switch to other  
Delete: delete the selected file or all  
multi-shot files.  
modes.  
p. 86  
Set as: set the photo as wallpaper for  
the displays or as a caller ID image for a  
Contacts entry.  
5. Press [OK] to start recording.  
6. Press [OK] to stop recording. The video  
is saved in the Videos folder.  
Go to Photos: access the Pictures  
7. To  
use video options  
Press  
Options>.  
] and then  
Yes>.  
folder.  
p. 68  
Rename: change the file name.  
<
p. 86  
delete the video  
clip  
[C  
<
84  
     
Video settings: change the following  
settings for recording a video:  
7. To  
Press  
send the video clip [OK].  
via MMS  
p. 52  
Default name: change the default  
prefix of file names.  
return to Record  
mode  
<Back>.  
Default storage: select the memory  
location to store video clips, if a memory  
card is inserted.  
Using camera options in Record mode  
Quality: select an image quality.  
In Record mode, press <  
following options:  
> to access the  
Recording time: select a video  
recording mode.  
Record: start recording.  
Select Limit for MMS to record a video  
suitable for an MMS message.  
Take photo: switch to Capture mode.  
Select Normal to record a video within  
the limit of the currently available  
memory. The length of your video is  
determined by how much memory has  
been used.  
Switch camera: switch between the  
front camera lens and rear camera lens.  
Go to Videos: access the Videos folder.  
Effects: change the colour tone or apply  
a special effect.  
Size: select a frame size.  
Zoom/Hide zoom: display the zoom  
Audio record: record a video with  
audio.  
control bar and zoom in or out by  
pressing [Up] or [Down], or hide the  
control bar.  
Camcorder shortcuts: view the  
functions of the keys you can use in  
Record mode.  
Brightness/Hide brightness: display  
the brightness control bar and adjust the  
brightness by pressing [Left] or [Right],  
or hide the control bar.  
85  
 
Menu functions  
Using the keypad in Record mode  
Using video options  
You can use the keypad to customise your  
camera settings in Record mode.  
After saving a video clip, press <Options>  
to access the following options:  
Send: send the file via MMS, e-mail, File  
messenger, or Bluetooth.  
Key  
Function  
Left/Right Adjusts the brightness.  
Up/Down Zooms in or out.  
Flips the image vertically.  
Play: play back the video clip.  
Viewfinder: return to Record mode.  
Delete: delete the file.  
Go to Videos: access the Videos folder.  
Shows the mirror image.  
p. 70  
1
2
3
4
Switches to Capture mode.  
Changes the frame size.  
Changes the image quality.  
Rename: change the file name.  
Changes the video recording  
mode.  
5
Changes the colour tone or  
applies a special effect.  
7
0
Mutes or unmutes audio.  
Goes to the Videos folder.  
86  
   
Video call ringtone: select a  
ringtone for video calls.  
Tone volume: adjust the volume for  
the call ringer.  
Message alert type: select an alert  
type for the message ringer.  
Message alert tone: select a  
ringtone for the message ringer.  
Message alert repetition: select if  
the phone repeatedly reminds you of  
a new message.  
Settings (Menu 9)  
Use this menu to customise your phone  
settings. You can also reset the settings to  
their default values.  
To access this menu, press [OK] in Idle  
mode and select Settings  
.
Profiles (Menu 9.1)  
Your phone provides you with sound profiles  
that allow you to quickly and easily change  
the sound settings of the phone for different  
events or situations. Use this menu to adjust  
the properties of each profile and activate  
the profile you need.  
Phone sounds: turn the various  
sounds on the phone on or off:  
All on: enable all tones.  
Popup box alerts: set the phone to  
beep when a pop-up window  
displays.  
Editing a profile  
1. Scroll to the profile you want.  
Minute minder: set the phone to  
beep every minute during an  
outgoing call to keep you informed of  
the length of your call.  
2. Press <Options> and select Edit  
.
3. Change the sound settings:  
Call alert type: select an alert type  
for the call ringer.  
Call connect tone: set the phone to  
beep when an outgoing call is  
connected to the system.  
Voice call ringtone: select a  
ringtone for voice calls.  
87  
         
Menu functions  
Call end tone: set the phone to  
Time & date (Menu 9.2)  
beep when a call is disconnected by  
the other person or due to a faded  
signal.  
Use this menu to change the time and date  
displayed on your phone. Before setting the  
time and date, specify your time zone in the  
Power on/off: set the phone to  
beep when you turn it on or off.  
World clock menu.  
p. 46  
Time: enter the current time. To select  
AM or PM for 12-hour time format, press  
[Right].  
Folder open/close: set the phone  
to sound when you open or close it.  
Alerts on call: set the phone to  
beep when you receive a new  
message or when the time for an  
alarm comes during a call.  
Date: enter the current date.  
Time format: select a time format.  
Date format: select a date format.  
Summer time: select to apply daylight  
saving time.  
Key tones: select a tone which  
sounds when you press a key.  
Key tone volume: adjust the  
volume of the key tones.  
Call answer mode: (For Car) select  
how to answer an incoming call.  
Auto update: activate the auto time  
update feature. Your phone will read the  
MCC (Mobile Country Code) from the  
network and automatically update the  
current time for the country that you are  
in when you travel abroad.  
4. When you have finished, press  
Options> and select Save  
<
.
Time information may not be updated  
when you move to one time zone to  
another within a country.  
Changing an active profile  
From the profile list, select the profile you  
want.  
88  
             
Change: change a shortcut menu  
assignment.  
Phone (Menu 9.3)  
Many different features of your phone’s  
system can be customised to suit your  
preferences.  
Remove: deactivate the shortcut  
assignment to the selected key.  
Remove all: deactivate all shortcut  
assignments.  
Language (Menu 9.3.1)  
Use this menu to select a language for the  
display text or T9 input mode. If you select  
Automatic, the phone uses the same  
language as the USIM/SIM card.  
Active folder (Menu 9.3.3)  
Use this menu to answer an incoming call by  
opening the phone.  
Anykey answer (Menu 9.3.4)  
Shortcuts (Menu 9.3.2)  
Use this menu to answer an incoming call by  
pressing any key, except for <Reject> and  
You can use the Navigation keys as shortcut  
keys to access specific menus directly from  
Idle mode. Use this menu to assign a  
shortcut to a key.  
[
].  
Volume key (Menu 9.3.5)  
Assigning a shortcut menu  
Use this menu to set whether the phone  
mutes the call ringer or rejects a call if you  
press and hold [ / ] when a call comes in.  
1. Select a key to be used as a shortcut  
key.  
2. Select a menu to be assigned to the key.  
Key management (Menu 9.3.6)  
Using shortcut options  
Use this menu to manage the licence keys  
you have acquired to activate media  
contents locked by DRM systems.  
Press <Options> to access the following  
options:  
Assign: assign a shortcut menu.  
89  
               
Menu functions  
Press <Options> to access the following  
options:  
Cover LCD (Menu 9.4.3)  
Use this menu to select an image or enter  
text to be displayed on the external display.  
View/Play/Preview: open the  
corresponding item.  
Clock: select a clock type.  
Delete: delete the selected licence key.  
Cover title: enter the text you want.  
Go to File manager: access the  
corresponding file folder.  
Wallpaper: press <Change> and select  
an image. If necessary, select the portion  
of the image to be displayed.  
Details: access the properties of the  
licence key.  
LCD brightness (Menu 9.4.4)  
Use this menu to adjust the brightness of  
the display.  
Display (Menu 9.4)  
Use this menu to change settings for the  
display and backlight.  
Backlight (Menu 9.4.5)  
You can select the length of time the  
backlight or display stays on.  
Greeting message (Menu 9.4.1)  
Use this menu to enter the greeting that is  
displayed briefly when the phone is switched  
on.  
On: select the length of time the  
backlight stays on in times of inactivity.  
Dim: select the length of time the  
display stays on in Dim mode after the  
backlight turns off. After a specified time,  
the display turns off.  
Wallpaper (Menu 9.4.2)  
Use this menu to change the background  
image to be displayed on the idle screen.  
90  
               
Dialling display (Menu 9.4.6)  
Diverting (Menu 9.5.2)  
Use this menu to customise the settings for  
the numbers entered and the background  
colour of the display while dialling.  
This network service reroutes incoming calls  
to a different phone number that you  
specify.  
1. Select the type of calls to be diverted.  
2. Select a call diverting option:  
Cover LCD contrast (Menu 9.4.7)  
You can adjust the contrast of the brightness  
for the external display. Adjust this setting  
with the display brightness to see the  
display clearly in different lighting  
conditions.  
Always: divert all calls.  
Busy: divert calls when you are on  
another call.  
No reply: divert calls when you do  
not answer the phone.  
Call (Menu 9.5)  
Unreachable: divert calls when you  
are not in your service area or when  
your phone is switched off.  
Cancel all: cancel all call diverting  
options.  
Use this menu to set options for call  
functions.  
Caller ID (Menu 9.5.1)  
This network service allows you to hide your  
phone number from the person you are  
calling. If you select By network, the phone  
will use the default setting provided by the  
network.  
3. Enter the number to which the calls will  
be diverted in the Divert to line.  
4. If you selected No reply, move to the  
Waiting time line and select the length  
of time the network delays before  
diverting a call.  
Some networks do not allow the user to  
change this setting.  
91  
     
Menu functions  
5. Press <Options> and select Activate  
.
Cancel all: cancel all call barring  
settings, allowing calls to be sent and  
received normally.  
To deactivate call diverting, select  
Deactivate  
.
3. Enter the call barring password supplied  
by your service provider.  
Barring (Menu 9.5.3)  
This network service allows you to restrict  
your calls.  
4. Press <Options> and select Activate  
.
To deactivate call barring, select  
1. Select the type of calls to be barred.  
2. Select a call barring option:  
Deactivate  
.
You can change the call barring password  
obtained from your service provider. From  
the call type list, press <Options> and  
All outgoing calls: prohibit all  
outgoing calls.  
Outgoing int’l calls: prohibit  
international calls.  
Int’l calls exc. home: only allow  
calls to numbers within the current  
country when you are abroad, and to  
your home country.  
select Change password  
.
Waiting (Menu 9.5.4)  
This network service informs you when  
someone is trying to reach you while you are  
on another call.  
All incoming calls: prohibit  
incoming calls.  
Incoming calls when roaming  
prohibit incoming calls when you use  
your phone outside of your home  
service area.  
1. Select the type of calls to which the call  
waiting option will apply.  
:
2. Press <Options> and select Activate  
.
To deactivate call waiting, select  
Deactivate  
.
92  
       
Auto redial (Menu 9.5.5)  
Video call (Menu 9.5.7)  
Use this menu to make up to ten attempts to  
redial a phone number after an unsuccessful  
call.  
Use this menu to change the default settings  
for using the video call feature.  
Show me: change the video camera  
settings for receipt of video calls:  
Closed user group (Menu 9.5.6)  
Optionally: you can select whether or  
not the video camera is used each time  
you answer a video call.  
Use this menu to set incoming and outgoing  
calls to be restricted to a selected user  
group. For details about how to create a  
closed user group (CUG), contact your  
service provider.  
Always: the camera is always used.  
Retry by: set what to do when a video  
call does not connect:  
Use user group: activate CUG index  
numbers.  
Voice call: the phone retries with a  
voice call.  
Outside access: enable calls to  
numbers other than those in the closed  
user group. This feature depends on the  
nature of your CUG subscription.  
Multimedia message: the phone will  
turn on the camera and switch to Record  
mode so that you can record a video and  
send it as an MMS message.  
Default group: enable the default CUG,  
if you have set one with your service  
provider. When making a call, you are  
given the option of using your default  
CUG, instead of selecting one from the  
list.  
None: the phone does not retry.  
Group index: add, delete, or activate  
CUG index numbers.  
93  
     
Menu functions  
Setting up the Bluetooth feature  
Connectivity (Menu 9.6)  
The Bluetooth menu provides the following  
options:  
Use this menu to set options for connection  
available on your phone.  
Activation: activate or deactivate the  
Bluetooth feature.  
Bluetooth (Menu 9.6.1)  
Using Bluetooth wireless, you can connect  
the phone wirelessly to other Bluetooth  
devices and exchange data with them, talk  
hands-free, or control the phone remotely.  
My devices: search for connectable  
Bluetooth devices.  
My phone’s visibility: allow other  
Bluetooth devices to locate your phone,  
or not.  
Bluetooth technology allows free wireless  
connections between all Bluetooth-compliant  
devices within a range of 10 metres. Since  
the devices communicate using radio waves,  
they do not need to be in line of sight to  
each other.  
My phone’s name: assign a Bluetooth  
device name to your phone, which is  
then displayed on other devices.  
Secure mode: determine if the phone  
asks for your confirmation when other  
devices access your data.  
• If there are obstacles between the  
devices, the operating distance may be  
reduced.  
Bluetooth service: display available  
• It is recommended that you do not use  
the Bluetooth feature while using  
multimedia features, such as voice  
recorder, camera, and media player, or  
vice versa, for better performance.  
• Some devices, especially those that are  
not tested or approved by SIG, may be  
incompatible with your phone.  
Bluetooth services.  
Searching for and pairing with a  
Bluetooth device  
1. From the Bluetooth menu, select My  
devices  
.
94  
         
2. Select Search new device  
.
Some devices, especially headsets or hands-  
free car kits, may have a fixed Bluetooth  
PIN, such as 0000. If the other device has  
one, you must enter the code.  
After searching, a list of devices to which  
you can connect displays. The following  
icons indicate the type of device:  
Mobile phone  
Hands-free car kit or headset  
Printer  
Computer  
PDA  
Using device options  
From the device list, press <Options> to  
access the following options:  
Browse device: search for data from  
the device and import data directly to  
your phone.  
Unknown device  
The colour of the icon indicates the  
status of the device:  
Connect: connect to a headset or  
hands-free car kit.  
Grey for unpaired devices  
Blue for paired devices  
Red for devices that are currently  
connected to your phone  
Disconnect: end the connection with  
the connected device.  
Authorise device/Unauthorise  
device: determine whether or not the  
phone asks you to permit connection  
when other devices try to connect to  
your phone.  
3. Select a device.  
4. Enter a Bluetooth PIN and press <OK>.  
This code is used just once and you do  
not need to memorise it.  
Delete: remove the selected device or  
all devices from the list.  
When the owner of the other device  
enters the same code, pairing is  
complete.  
Rename: rename the selected device.  
95  
Menu functions  
Sending data via Bluetooth  
Network selection: select to either  
manually select the network to be used  
when roaming outside of your home  
area, or to let the network be chosen  
automatically. You can select a network  
other than your home network only if  
there is a valid roaming agreement  
between the two.  
1. Activate the Bluetooth feature.  
2. Select the application in which the item  
you want to send is stored.  
3. Scroll to the item you want and press  
<
Options>.  
4. Select Send name card  
schedule Send task  
5. Select a device.  
/
Send  
/Send  
/
Via bluetooth.  
Network mode: select the network you  
use:  
6. If necessary, enter the Bluetooth PIN  
Automatic: the phone scans for  
available networks.  
needed for pairing and press <OK>.  
Receiving data via Bluetooth  
GSM 900/1800: the phone operates in  
the combined GSM 900/1800 network.  
To receive data via Bluetooth, your phone’s  
Bluetooth feature must be active and its  
visibility must be enabled.  
GSM 1900: the phone operates in the  
GSM 1900 network. This option is only  
available in the U.S.A.  
1. If an unauthorised Bluetooth device  
UMTS: the phone operates in UMTS (3G  
network) networks. You can get a higher  
speed connection than on lower  
generation networks, and use advanced  
data and information services, such as  
video calls.  
sends data to your phone, press <Yes  
to allow the device to access your phone.  
>
2. Press <Yes> to receive data.  
Network (Menu 9.6.2)  
Use this menu to change the settings for  
connecting to your cellular network.  
96  
         
Protocol: select the protocol from  
among WAP HTTP, and Other  
Home URL: enter the URL address  
of the page to be used as your  
homepage.  
Gateway address: (WAP only) enter  
the gateway address of the proxy  
server.  
Connections (Menu 9.6.3)  
,
.
Use this menu to create and customise the  
profiles containing the settings for  
connecting your phone to the network. You  
need these settings to use the web browser  
or send MMS messages or e-mails.  
Your phone is set up by default for  
connecting to the network. If you change the  
settings without first checking with your  
service provider, the web browser, MMS, and  
e-mail features may not work properly.  
Proxy address/Port: (HTTP only)  
set the proxy server address and  
port.  
Secure connection: (WAP only)  
turn the secure mode on or off.  
Linger time (sec.): set a time  
period after which the network is  
disconnected if there has been no  
new data traffic in that time.  
Advanced settings: provide you  
with the following options:  
Creating a profile  
1. Press <Options> and select New  
.
2. Specify profile parameters:  
Set name: enter a profile name.  
Access name: edit the access point  
name used for the address of the  
GPRS network gateway.  
Static IP: specify if you want to  
manually enter an IP address; see  
the Local phone IP option. If you  
want the IP address to be  
automatically assigned by the server,  
remove the check mark.  
Auth type: choose the type of  
authentication used.  
User ID: enter the user ID.  
Password: enter the user password.  
97  
 
Menu functions  
Local phone IP: enter the IP  
Restore: restore the changed settings  
to the default status.  
address obtained from the network  
operator, if you checked the Static  
IP option.  
Application settings (Menu 9.7)  
Static DNS: specify if you want to  
manually enter the Domain Name  
Server (DNS) address; see the  
You can customise the settings for using  
applications available on the phone.  
Internet (Menu 9.7.1)  
Server 1/Server 2 option.  
Use this menu to select a connection profile  
to be used for accessing the Internet. You  
If you want the address to be  
automatically assigned by the server,  
remove the check mark.  
can also create or edit a profile.p. 97  
Server 1/Server 2: enter the  
Messages (Menu 9.7.2)  
Domain Name Server (DNS) address.  
Traffic class: select the traffic class.  
3. Press <Save> to save the profile.  
Use this menu to change the default settings  
for using the messaging services.  
p. 62  
Contacts (Menu 9.7.3)  
Using profile options  
Use this menu to change the default settings  
for using Contacts. p. 41  
From the profile list, press <Options> to  
access the following options:  
Camera (Menu 9.7.4)  
Use this menu to change the default settings  
for taking photos. p. 82  
View: view the properties of the  
selected profile.  
Edit: edit the profile.  
Video recorder (Menu 9.7.5)  
New: add a new profile.  
Use this menu to change the default settings  
Rename: change the profile name.  
Delete: delete the profile.  
for recording videos.p. 85  
98  
 
Voice recorder (Menu 9.7.6)  
Phone lock (Menu 9.8.1)  
Use this menu to change the default settings  
Use this menu to protect the phone from  
unauthorised use. When this feature is  
enabled, you must enter a 4- to 8-digit  
phone password each time the phone is  
switched on.  
for the voice recorder.p. 46  
Media player (Menu 9.7.7)  
Use this menu to change the default settings  
for playing media files in the media  
The password is preset to 00000000. To  
change the password, use the Change  
phone password menu.  
player.p. 44  
VOD (Menu 9.7.8)  
Use this menu to activate a connection  
profile to be used for accessing streaming  
servers to use VOD (Video on Demand)  
services. You can also create or edit a  
SIM lock (Menu 9.8.2)  
This menu allows your phone to work only  
with the current USIM/SIM by assigning a  
USIM/SIM lock code. You must enter the  
USIM/SIM lock code to use a different USIM/  
SIM card.  
profile.p. 97  
Security (Menu 9.8)  
PIN lock (Menu 9.8.3)  
Use this menu to protect the phone against  
unauthorised use by managing the several  
access codes of your phone and USIM/SIM  
card.  
The 4- to 8-digit PIN (Personal Identification  
Number) protects your USIM/SIM card  
against unauthorised use. When this feature  
is enabled, the phone requires your PIN each  
time it is switched on.  
If you enter an incorrect PIN/PIN2 three  
times, the USIM/SIM card is blocked. To  
unblock it, you need to enter your PUK/PUK2  
(Personal Unblocking Key). The codes are  
supplied by your network operator.  
99  
     
Menu functions  
Fixed dialling mode (Menu 9.8.4)  
Mobile tracker (Menu 9.8.9)  
If supported by your USIM/SIM card, Fixed  
Dialling Number (FDN) mode restricts your  
outgoing calls to a limited set of phone  
numbers. When this feature is enabled, you  
can make calls only to phone numbers  
stored on the USIM/SIM card.  
When someone tries to use your phone with  
another USIM/SIM card, the phone will  
automatically send the preset tracking  
message to your family or friends. You can  
check the phone number from which the  
messages are sent and then track your  
phone. This feature is useful when the phone  
is stolen or lost.  
Change phone password (Menu 9.8.5)  
Use this menu to change your phone  
password.  
Sending of the tracking message will be  
billed to the user of the unauthorised USIM/  
USIM/SIM card. To use your phone with any  
other USIM/SIM card, you must first  
Privacy lock (Menu 9.8.6)  
Use this menu to lock access to messages,  
media files, Contacts entries, or call logs.  
When a lock option is enabled, you must  
enter the phone password to access the  
locked items.  
deactivate the Mobile tracker feature.  
1. Enter the phone password and press  
<Confirm>.  
2. Specify the following options:  
Activation: activate or deactivate  
the Mobile tracker feature.  
Recipients: specify phone numbers  
to which you want to send the  
tracking messages.  
Sender: enter the sender’s name.  
Messages: check the preset tracking  
message text.  
Change PIN code (Menu 9.8.7)  
Use this menu to change your PIN. The PIN  
lock feature must be enabled to change the  
PIN.  
Change PIN2 code (Menu 9.8.8)  
If supported by your USIM/SIM card, use  
this menu to change your current PIN2.  
100  
             
3. When you have finished, press <Save>.  
Reset settings (Menu 9.*)  
4. Press <Accept> if you agree to the  
terms and conditions of service listed on  
the screen.  
Use this menu to reset the phone’s settings  
you have changed and clear all data you  
have added.  
1. Enter the phone password and press  
Memory status (Menu 9.9)  
<Confirm>.  
Use this menu to check the amount of  
memory being used for storing data, such as  
messages, media and document files,  
Contacts entries, or calendar data.  
The password is preset to 00000000  
.
You can change this password.  
p. 100  
2. Press <Yes>. The phone automatically  
turns itself off and then back on.  
Operator settings (Menu 9.0)  
Use this menu to set a service provider  
according to the USIM/SIM card you are  
using. When you select a service provider,  
the phone will automatically turn itself off  
and then back on. You can then see the  
profiles corresponding to the service  
provider in the connection menus.  
This menu may not be shown depending on  
your service provider.  
101  
         
“PUK lock”  
The PIN has been entered incorrectly  
Solve problems  
three times, and the USIM/SIM card is  
now blocked. Enter the PUK supplied by  
your service provider.  
Help and personal needs  
To save the time and expense of an  
unnecessary service call, perform the simple  
checks in this section before contacting a  
service professional.  
“Service unavailable” or “Network  
error” displays  
The network connection has been lost.  
You may be in a weak signal area. Move  
and try again.  
When you switch on your phone, the  
following messages may appear:  
“Please insert SIM card”  
You are trying to access an option for  
which you have no subscription with your  
service provider. Contact the service  
provider for further details.  
Be sure that the USIM/SIM card is  
correctly installed.  
“Phone lock”  
The automatic locking function has been  
You have entered a number but it was  
not dialled  
enabled. You must enter the phone’s  
password before you can use the phone.  
Be sure that you have pressed [ ].  
“PIN lock”  
Be sure that you have accessed the right  
cellular network.  
You are using your phone for the first  
time. You must enter the PIN supplied  
with the USIM/SIM card.  
Be sure that you have not set an  
outgoing call barring option.  
The PIN lock feature is enabled. Every  
time the phone is switched on, the PIN  
has to be entered. To disable this  
feature, use the PIN lock menu.  
Your correspondent cannot reach you  
Be sure that your phone is switched on.  
([ ] pressed for more than one  
second.)  
102  
     
Be sure that you are accessing the  
correct cellular network.  
No number is dialled when you re-call a  
Contacts entry  
Be sure that you have not set an  
incoming call barring option.  
Use the Search contact menu to ensure  
the number has been stored correctly.  
Re-store the number, if necessary.  
Your correspondent cannot hear you  
speaking  
The battery does not charge properly or  
the phone sometimes turns itself off  
Be sure that you have switched on the  
microphone.  
Wipe the charging contacts both on the  
phone and on the battery with a clean  
soft cloth.  
Be sure that you are holding the phone  
close enough to your mouth. The  
microphone is located at the bottom of  
the phone.  
If the above guidelines do not help you  
to solve the problem, take note of:  
The phone starts beeping and “Low  
battery” flashes on the display  
The model and serial numbers of your  
phone  
Your battery is insufficiently charged.  
Recharge the battery.  
Your warranty details  
A clear description of the problem  
The audio quality of the call is poor  
Then contact your local dealer or Samsung  
after-sales service.  
Check the signal strength indicator on  
the display ( ). The number of bars  
indicates the signal strength from strong  
) to weak ( ).  
(
Try moving the phone slightly or moving  
closer to a window if you are in a  
building.  
103  
The exposure standard for mobile phones  
employs a unit of measurement known as  
Specific Absorption Rate (SAR). The SAR  
limit recommended by the EU Council is  
Health and safety  
information  
1
SAR certification information  
2.0 W/kg.  
This phone meets European Union (EU)  
requirements concerning exposure to radio  
waves.  
The highest SAR value for this model phone  
was 0.988 W/kg.  
SAR tests are conducted using standard  
operating positions with the phone  
Your mobile phone is a radio transmitter and  
receiver. It is designed and manufactured to  
not exceed the limits for exposure to radio-  
frequency (RF) energy, as recommended by  
the EU Council. These limits are part of  
comprehensive guidelines and establish  
permitted levels of RF energy for the general  
population. The guidelines were developed  
by independent scientific organisations  
through the periodic and thorough  
transmitting at its highest certified power  
level in all tested frequency bands. Although  
the SAR is determined at the highest  
certified power level, the actual SAR level of  
the phone while operating can be well below  
the maximum value. This is because the  
phone is designed to operate at multiple  
power levels so as to use only the power  
required to reach the network. In general,  
the closer you are to a base station, the  
lower the power output of the phone.  
evaluation of scientific studies. The limits  
include a substantial safety margin designed  
to ensure the safety of all persons,  
regardless of age and health.  
1. The SAR limit for mobile phones used by the public is  
2.0 watts/kilogram (W/kg) averaged over ten grams of  
body tissue. The limit incorporates a substantial margin  
of safety to give additional protection for the public and  
to account for any variations in measurements. The SAR  
values may vary, depending on national reporting  
requirements and the network band.  
104  
   
Before a new model phone is available for  
sale to the public, compliance with the  
European R&TTE Directive must be shown.  
This directive includes as one of its essential  
requirements the protection of the health  
and safety of the user and any other person.  
If left unused, a fully charged battery will  
discharge itself over time.  
Use only Samsung-approved batteries,  
and recharge your battery only with  
Samsung-approved chargers. Disconnect  
the charger from the power source when  
it is not in use. Do not leave the battery  
connected to a charger for more than a  
week, since overcharging may shorten  
its life.  
Precautions when using batteries  
Never use a charger or battery that is  
damaged in any way.  
Extreme temperatures will affect the  
charging capacity of your battery: it may  
require cooling or warming first.  
Use the battery only for its intended  
purpose.  
If you use the phone near the network’s  
base station, it uses less power. Talk and  
standby time are greatly affected by the  
signal strength on the cellular network  
and the parameters set by the network  
operator.  
Do not leave the battery in hot or cold  
places because the capacity and lifetime  
of the battery will be reduced. Try to  
keep the battery at room temperature. A  
phone with a hot or cold battery may not  
work temporarily, even when the battery  
is fully charged.  
Battery charging time depends on the  
remaining battery charge, the type of  
battery, and the charger used. The  
battery can be charged and discharged  
hundreds of times, but it will gradually  
wear out. When the operation time is  
noticeably shorter than normal, it is time  
to buy a new battery.  
Li-ion batteries are particularly affected  
by temperatures below 0°C (32°F).  
105  
 
Health and safety information  
Do not short-circuit the battery.  
Operating environment  
Accidental short-circuiting can occur  
when a metallic object like a coin, clip or  
pen causes a direct connection between  
the + and – terminals of the battery  
(metal strips on the battery). For  
example, do not carry a spare battery in  
a pocket or bag where the battery may  
contact metal objects. Short-circuiting  
the terminals may damage the battery or  
the object causing the short-circuiting.  
Remember to follow any special regulations  
in force in the area you are in, and always  
switch off your phone whenever it is  
forbidden to use it, or when it may cause  
interference or danger.  
When connecting the phone or any  
accessory to another device, read its user’s  
guide for detailed safety instructions. Do not  
connect incompatible products.  
As with other mobile radio transmitting  
equipment, users are advised that for the  
satisfactory operation of the equipment and  
for the safety of personnel, it is  
recommended that the equipment should  
only be used in the normal operating  
position (held to your ear with the antenna  
pointing over your shoulder).  
Dispose of used batteries in accordance  
with local regulations. Always recycle. Do  
not dispose of batteries in a fire.  
Road safety  
Your wireless phone gives you the powerful  
ability to communicate by voice, almost  
anywhere, anytime. But an important  
responsibility accompanies the benefits of  
wireless phones, one that every user must  
uphold.  
Electronic devices  
Most modern electronic equipment is  
shielded from radio frequency (RF) signals.  
However, certain electronic equipment may  
not be shielded against the RF signals from  
your wireless phone. Consult the  
When you are driving a car, driving is your  
first responsibility. When using your wireless  
phone while driving, follow local regulations  
in the country or region you are in.  
manufacturer to discuss alternatives.  
106  
 
Your physician may be able to assist you in  
obtaining this information.  
Pacemakers  
Pacemaker manufacturers recommend that  
a minimum distance of 15 cm (6 inches) be  
maintained between a wireless phone and a  
pacemaker to avoid potential interference  
with the pacemaker. These  
recommendations are consistent with the  
independent research and recommendations  
of Wireless Technology Research. If you  
have any reason to suspect that interference  
is taking place, switch off your phone  
immediately.  
Switch off your phone in health care facilities  
when regulations posted in these areas  
instruct you to do so.  
Vehicles  
RF signals may affect improperly installed or  
inadequately shielded electronic systems in  
motor vehicles. Check with the  
manufacturer or its representative regarding  
your vehicle.  
You should also consult the manufacturer of  
any equipment that has been added to your  
vehicle.  
Hearing aids  
Some digital wireless phones may interfere  
with some hearing aids. In the event of such  
interference, you may wish to consult your  
hearing aid manufacturer to discuss  
alternatives.  
Posted facilities  
Switch off your phone in any facility where  
posted notices require you to do so.  
Other medical devices  
If you use any other personal medical  
devices, consult the manufacturer of your  
device to determine if it is adequately  
shielded from external RF energy.  
107  
Health and safety information  
Potentially explosive environments  
Emergency calls  
Switch off your phone when in any area with  
a potentially explosive atmosphere, and  
obey all signs and instructions. Sparks in  
such areas could cause an explosion or fire  
resulting in bodily injury or even death.  
This phone, like any wireless phone,  
operates using radio signals, wireless, and  
landline networks as well as user-  
programmed functions, which cannot  
guarantee connection in all conditions.  
Therefore, you should never rely solely on  
any wireless phone for essential  
Users are advised to switch off the phone  
while at a refuelling point (service station).  
Users are reminded of the need to observe  
restrictions on the use of radio equipment in  
fuel depots (fuel storage and distribution  
areas), chemical plants, or where blasting  
operations are in progress.  
communications like medical emergencies.  
To make or receive calls, the phone must be  
switched on and in a service area with  
adequate signal strength. Emergency calls  
may not be possible on all wireless phone  
networks or when certain network services  
and/or phone features are in use. Check  
with local service providers.  
Areas with a potentially explosive  
atmosphere are often but not always clearly  
marked. They include the areas below decks  
on boats, chemical transfer or storage  
facilities, vehicles using liquefied petroleum  
gas, such as propane or butane, areas  
where the air contains chemicals or  
particles, such as grain, dust or metal  
powders, and any other area where you  
would normally be advised to turn off your  
vehicle engine.  
To make an emergency call:  
1. Switch on the phone.  
2. Key in the emergency number for your  
present location. Emergency numbers  
vary by location.  
3. Press [ ].  
108  
 
Certain features like Call Barring may need  
to be deactivated before you can make an  
emergency call. Consult this document and  
your local cellular service provider.  
Improperly installed wireless equipment  
could result in serious injury if the air  
bag inflates.  
Switch off your phone before boarding an  
aircraft. It is dangerous and illegal to use  
wireless phones in an aircraft because  
they can interfere with the operation of  
the aircraft.  
Other important safety information  
Only qualified personnel should service  
the phone or install the phone in a  
vehicle. Faulty installation or service may  
be dangerous and may invalidate any  
warranty applicable to the device.  
Failure to observe these instructions may  
lead to the suspension or denial of  
telephone services to the offender, or  
legal action, or both.  
Check regularly that all wireless phone  
equipment in your vehicle is mounted  
and operating properly.  
Care and maintenance  
Do not store or carry flammable liquids,  
gases, or explosive materials in the same  
compartment as the phone, its parts, or  
accessories.  
Your phone is a product of superior design  
and craftsmanship and should be treated  
with care. The suggestions below will help  
you fulfill any warranty obligations and allow  
you to enjoy this product for many years.  
For vehicles equipped with an air bag,  
remember that an air bag inflates with  
great force. Do not place objects,  
Keep your phone and all its parts and  
accessories out of the reach of small  
children and pets. They may accidentally  
damage these things or choke on small  
parts.  
including installed or portable wireless  
equipment, in the area over the air bag  
or in the air bag deployment area.  
109  
 
Health and safety information  
Keep the phone dry. Precipitation,  
humidity, and liquids contain minerals  
that corrode electronic circuits.  
Do not use harsh chemicals, cleaning  
solvents, or strong detergents to clean  
the phone. Wipe it with a soft cloth  
slightly dampened in a mild soap-and-  
water solution.  
Do not use the phone with a wet hand.  
Doing so may cause an electric shock to  
you or damage to the phone.  
Do not paint the phone. Paint can clog  
the device’s moving parts and prevent  
proper operation.  
Do not use or store the phone in dusty,  
dirty areas, as its moving parts may be  
damaged.  
Do not put the phone in or on heating  
devices, such as a microwave oven,  
stove, or radiator. The phone may  
explode when overheated.  
Do not store the phone in hot areas.  
High temperatures can shorten the life of  
electronic devices, damage batteries,  
and warp or melt certain plastics.  
When the phone or battery gets wet, the  
label indicating water damage inside the  
phone changes colour. In this case,  
phone repairs are no longer guaranteed  
by the manufacturer's warranty, even if  
the warranty for your phone has not  
expired.  
Do not store the phone in cold areas.  
When the phone warms up to its normal  
operating temperature, moisture can  
form inside the phone, which may  
damage the phone’s electronic circuit  
boards.  
If your phone has a flash or light, do not  
use it too close to the eyes of people or  
animals. This may cause damage to their  
eyes.  
Do not drop, knock, or shake the phone.  
Rough handling can break internal circuit  
boards.  
110  
Use only the supplied or an approved  
replacement antenna. Unauthorised  
antennas or modified accessories may  
damage the phone and violate  
regulations governing radio devices.  
If the phone, battery, charger, or any  
accessory is not working properly, take it  
to your nearest qualified service facility.  
The personnel there will assist you, and  
if necessary, arrange for service.  
111  
Index  
A
ABC mode, text input • 28  
Alarm • 75  
Answering  
missed • 34  
received • 35  
Call time • 36  
Caller groups • 39  
Caller ID • 91  
Calls  
MMS with files • 53  
MMS • 52  
SMS • 51  
CUG (Closed User Groups) • 93  
call • 30  
D
second call • 31  
Anykey answer • 89  
Auto redial • 93  
Date, set • 88  
Deleting  
answering • 30  
barring • 92  
diverting • 91  
holding • 31  
call log • 35  
contacts • 37  
e-mail • 60, 62  
MMS • 57, 62  
SMS • 57, 62  
Dialled calls • 35  
Display  
B
Background image • 90  
Backlight time, set • 90  
Barring, calls • 92  
Battery  
making • 29  
redialling • 30  
rejecting • 30  
transferring • 32  
waiting • 92  
charging • 7  
backlight, set • 90  
brightness • 90  
icons • 10  
language • 89  
layout • 10  
low indicator • 8  
precautions • 105  
Bluetooth  
Camera  
photos • 81  
videos • 84  
Characters, enter • 27  
Configuration messages • 58  
Contacts  
receiving, data • 96  
sending, data • 96  
settings • 94  
settings • 90  
Diverting, calls • 91  
DRM (Digital Rights Management)  
• 68  
Broadcast messages • 62, 67  
Browser, web • 48  
adding • 38  
deleting • 37  
editing • 37  
finding • 37  
options • 37  
C
DTMF tones, send • 32  
Calculator • 46  
Calendar • 76  
Call cost • 36  
Call log  
E
speed-dialling • 40  
Converter • 47  
Creating messages  
e-mail • 55  
E-mails  
creating/sending • 55  
deleting • 60  
dialled • 35  
112  
 
settings • 65  
viewing • 59  
Emergency calls • 108  
settings • 63  
viewing • 57  
Multiparty-call • 33  
Music, downloaded • 71  
L
Language, select • 89  
Last number, redial • 30  
Locking  
F
media contents • 100  
phone • 99  
N
File messenger • 53  
Folder tone • 88  
Names  
USIM/SIM card • 99  
Low battery indicator • 8  
entering • 27  
searching • 37  
Network band, select • 96  
Network selection • 96  
Numbers  
G
Games • 73  
Greeting message • 90  
M
Memory card  
accessing files 75  
installing • 25  
Memory status  
calendar items • 80  
contacts • 41  
H
searching • 37  
storing • 38  
Health and safety • 104  
Holding, call • 31  
O
I
Organiser • 75  
Outbox, messages • 58  
messages • 68  
phone • 101  
Icons, description • 10  
Images, downloaded • 68  
Inbox, messages  
e-mail • 59  
SMS/MMS • 56  
International calls • 29  
Internet • 48  
Messages  
P
broadcast • 62  
configuration • 58  
e-mail • 54, 59  
greeting • 90  
MMS with files • 53  
MMS • 52, 57  
push • 57  
Password  
barring • 92  
phone • 100  
Phone  
care and maintenance • 109  
display • 10  
icons • 10  
locking • 99  
password • 100  
resetting • 101  
switching on/off • 8  
unpacking • 6  
J
Java applications • 73  
SMS • 51, 56  
Missed alarm events • 80  
Missed calls • 34  
MMS messages  
creating/sending • 52, 53  
deleting • 57  
K
Key tones  
selecting • 88  
volume • 88  
113  
Index  
Photos  
S
U
editing • 69  
taking • 81  
viewing • 68  
Safety  
USIM card  
information • 104  
inserting • 7  
locking • 99  
precautions • 1  
Security, calls • 99  
Sent messages • 59  
Shortcuts • 89  
Silent mode • 14  
SIM card  
PIN, change • 100  
PIN2, change • 100  
Power on/off tone • 88  
Privacy • 100  
Problems, solve • 102  
Profiles • 87  
V
Video calls  
answering • 33  
making • 33  
options • 33  
setting • 93  
inserting • 7  
locking • 99  
Push messages • 57, 67  
Videos  
SMS messages  
R
playing • 70  
recording • 84  
creating/sending • 51  
deleting • 57, 62  
viewing • 56  
Received calls • 35  
Received messages  
e-mail • 59  
Voice recorder  
playing • 45  
recording • 44  
Sound profiles • 87  
Sounds, downloaded • 72  
Speakerphone • 32  
Speed-dial • 40  
Switching on/off  
microphone • 32  
phone • 8  
SMS/MMS • 56  
Recording  
videos • 84  
voice memos • 44  
Redialling  
automatically • 93  
manually • 30  
Resetting phone • 101  
Ringer  
incoming calls • 87  
messages • 87  
Road safety • 106  
Roaming • 96  
Voicemail server • 67  
W
Waiting call • 92  
Wallpaper • 90  
Web browser  
access • 48  
T
bookmarks • 49  
World clock • 46  
T9 mode, text input • 27  
Templates, message • 61  
Text, enter • 27  
Time, set • 88  
114  
* Depending on the software installed or your service provider or country, some of the  
descriptions in this guide may not match your phone exactly.  
* Depending on your country, your phone and accessories may appear different from the  
illustrations in this guide.  
Printed in Korea  
Code No.:GH68-11605A  
World Wide Web  
English (EU). 07/2006. Rev. 1.0  
http://www.samsungmobile.com  

Sony Ericsson D750i User Manual
Sony CDX CA590X User Manual
Sony ATRAC3 User Manual
Seagate Momentus ST9250424ASG User Manual
Seagate Barracuda ST3120026A User Manual
Scotts CD Player SMV300 User Manual
Samsung Galaxy Tab 3 GTP5210ZWYXAR User Manual
RCA CD Player RP2419 User Manual
Philips CT6598 User Manual
Panasonic HYBRID IP PBX KX TDA100 User Manual