SGH-T469W
P O R T A B L E
M O B I L E P H O N E
User Manual
3 G
Please read this manual before operating your
phone, and keep it for future reference.
Open Source Software
Some software components of this product incorporate source code covered under GNU General Public License
(GPL), GNU Lesser General Public License (LGPL), OpenSSL License, BSD License and other open source
licenses. To obtain the source code covered under the open source licenses, please visit:
http://www.samsungnetwork.com/Home/opensource
.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED
WITH THE PRODUCT, THE PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO
EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR
ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING
FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Switch Off When Refueling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Switch Off in Hospitals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Special Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Sensible Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Emergency Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Accessories and Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Qualified Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Section 2: Getting Started ................................................................................3
Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setting Up Your Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Front View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Back View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Side Views of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Section 4: Menu Navigation ...........................................................................19
Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Selecting Functions and Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Section 5: Call Functions ...............................................................................23
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Adjusting the Call Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Call history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
i
Vibration profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Section 6: Entering Text ................................................................................. 33
Using the QWERTY Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Changing the Text Input Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using ABC mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Using T9 Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Using Numeric Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Section 7: People ............................................................................................ 39
Using Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Finding a Contact Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Editing a Caller Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Speed Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
My Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Section 8: Messages ...................................................................................... 46
Types of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Create and send a message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Sentbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Drafts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Section 9: Media ............................................................................................. 59
Photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Music Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
ii
Games and Apps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Memory status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Personalize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Display settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Messaging key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Greeting message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Time and Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Call settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Reset settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Section 11: Applications ................................................................................87
Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Voice Recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Memo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Tip calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Section 12: Browser ........................................................................................99
Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Section 13: Photos ........................................................................................104
Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Section 14: Calendar .....................................................................................113
iii
Creating Calendar Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Event Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Viewing a Calendar Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Exposure to Radio Frequency (RF) Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
For Body Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Precautions When Using Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Electronic Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Other Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
FCC Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Appendix A: Certification Information (SAR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Appendix B: Safe and Responsible Wireless Phone Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Appendix C: Consumer Update on Wireless Phones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Section 16: Warranty Information ............................................................... 133
Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Index ............................................................................................................................... 137
iv
Section 1: Important Safety Precautions
Please read these guidelines before using your wireless phone. Failure to comply with them may be dangerous or
illegal.
Road Safety
Do not use a hand-held phone while driving; park the vehicle first.
Switch Off When Refueling
Do not use the phone at a refueling point (service station) or near fuels or chemicals.
Switch Off in Aircraft
Wireless phones can cause interference. Using them in aircraft is both illegal and dangerous.
Switch Off in Hospitals
Switch your phone off near medical equipment. Follow any regulations or rules in force.
Special Regulations
Follow any special regulations in force in any area and always switch your phone off whenever it is forbidden to use it,
or when it may cause interference or danger (for example, in a hospital).
Sensible Use
Use the phone only in the normal position (held to the ear).
Emergency Call
Ensure the phone is switched on and in service. Key in the emergency number for your present location, then
press
. You must deactivate any unnecessary features before you can make an emergency call. Give all the
necessary information as accurately as possible. Do not end the call until given permission to do so.
Water Resistance
Your phone is not water-resistant. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and batteries. Use of any unauthorized accessories could damage your
phone and may be dangerous.
Important Safety Precautions
1
Section 2: Getting Started
This section explains how to start using your phone by first configuring your hardware, activating your service, and
then setting up your voice mail.
Activating Your Phone
When you subscribe to a cellular network, you are provided with a plug-in SIM card loaded with your subscription
details, such as your PIN, available optional services, and many others features.
Installing the SIM Card
Important!: The plug-in SIM card and its contacts information can be easily damaged by scratching or bending,
so be careful when handling, inserting, or removing the card. Keep all SIM cards out of reach of
small children.
If necessary, switch off the phone by holding down the
key until the power-off image displays.
1. Remove the battery cover by sliding the battery cover in the direction of the arrow.
2. Carefully lift the battery cover away from the bottom of the phone.
Getting Started
3
3. Lift up and remove the battery.
4. Carefully slide the SIM card under the metal bracket and into the SIM card socket. Make sure that the card’s
gold contacts face into the phone and that the upper-left angled corner of the card is positioned as shown below.
Note: If the card is not inserted correctly, the phone does not detect the SIM card. Remove the battery and re-orient the card back into
the slot.
5. Replace the battery:
•
•
Slide the battery back into the compartment so that the tabs on the end align with the slots at the bottom of the phone.
Press the battery down until it snaps into place.
4
Reinstall the battery cover by sliding it back onto the phone until you hear it securely snap. Make sure the
battery is properly installed before switching on the phone.
Inserting the Memory Card
1. Place the microSD card into the slot under the SIM card (as shown below). Ensure the microSD’s gold contact
pins face upward and the card is placed so that the indentations on the card face the same direction as those
Getting Started
5
illustrated.
Removing the memory card
Press in gently on the memory card with your thumbnail or finger until it releases from the slot and carefully remove
the memory card.
Note: Your phone supports microSD cards of up to 16 GB capacity. Memory cards with over 16GB storage capacity have not been tested
with this phone.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. A travel adapter, which is used for charging the battery, is
included with your phone. Use only approved batteries and chargers. Ask your local Samsung dealer for further
details.
You can use the phone while the battery is charging, but doing so requires additional charging time.
Note: You must fully charge the battery before using your phone for the first time. A discharged battery recharges fully in approximately
four hours.
1. With the battery installed, gently remove the plastic cover on the right side of the phone and plug in the travel
adapter’s connector into the jack.
6
Important!: Verify that the handset battery is installed prior to connecting the travel adapter. If the battery is not
installed and the travel adapter is connected the handset continuously power cycles and prevents
proper operation.
2. Plug the adapter’s power plug into a standard AC wall outlet.
Note: The previous illustration displays the correct and incorrect method for connecting the charger. If the charger is inserted
incorrectly, damage to the accessory port occurs, voiding the phone’s warranty.
3. When charging is finished, unplug the adapter’s power plug from the AC wall outlet and then disconnect the
travel adapter’s connector from the phone.
4. Resecure the plastic cover over the interface jack on the phone.
Warning!: Failure to unplug the travel adapter before you remove the battery, can cause damage to the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time remain, a warning tone sounds and the “Battery low”
message repeats at regular intervals on the display. In this condition, your phone conserves its remaining battery
power by dimming the backlight.
Getting Started
7
When the battery level becomes too low, the phone automatically turns off.
Switching the Phone On or Off
Warning!: The phone’s touch screen responds best to a light touch from the pad of your finger or a non-metallic stylus. Using excessive
force or a metallic object when pressing on the touch screen may damage the tempered glass surface and void the warranty
1. Press and hold the
2. If the phone asks you to enter the phone password, use the keypad to enter this password and press either the
Confirm soft key or
key until the phone switches on.
.
3. If the phone asks for a PIN, use the keypad to enter the PIN and press either the Confirm soft key or
. For
The phone searches for your network and after finding it, the message “WIND Home” displays on the bottom
centre of your screen. Now you can make or receive calls.
Note: The display language is preset to Automatic at the factory.
4. When you wish to switch off the phone, press and hold
until the power-off image displays.
Setting Up Your Voice Mail
For new users, follow the instructions below to set up voice mail:
1. In Idle mode, press and hold the
key on the keypad.
You may be prompted to enter a password.
2. Follow the tutorial to create a password, a greeting, and your name.
Note: These steps may be different depending on your network.
8
Accessing Your Voice Mail
You can press and hold the
voice mail using the menu:
key on the keypad or use the phone’s menu to access your voice mail. To access
1. In Idle mode, press Menu Messaging Voice mail.
Your phone dials the specified voice mail number.
2. When connected, follow the voice prompts from the voice mail center.
Getting Started
9
Section 3: Understanding Your Phone
This section outlines some key features of your phone. It also explains the screen and the icons that display when the
phone is in use.
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many significant features. The following list outlines a few of the
features included in your phone.
•
•
•
•
•
•
•
2.0 Megapixel Camera with 12x Digital Zoom
®
Bluetooth Wireless Technology
User friendly, menu driven access to features and options
Text Messaging, Picture Messaging capability
Sound/Image media capability
Media feature provides photos, music, images, sounds, videos, games and apps, other files, and memory status.
Applications feature provides calendar, alarm, voice recognition, tasks, memo, calculator, tip calculator, world clock, converter,
timer, and stopwatch.
10
Front View of Your Phone
The following illustrations show the main elements of your phone:
1
14
13
12
2
11
3
10
4
9
5
6
8
7
7
Keys
The following list correlates to the illustrations.
1. Earpiece allows you to hear the other caller.
2. Left Soft key allows you to select soft key actions or menu items. The option for the soft key displays on the
bottom, left portion of the screen.
3. Send key allows you to make or answer a call. In Idle mode, a short press displays Call history.
Understanding Your Phone
11
4. Messaging key allows you to program this key as a shortcut to your favorite messaging application. You can
reprogram the key at any time.
5. Voice mail key allows you to quickly access your voice mail. Press and hold this key for two seconds to
automatically dial your voice mail’s phone number.
6. Alphanumeric keys allow you to enter numbers, letters, and some special characters.
7. Special Function keys allow you activate unique features while in Idle mode. In Idle mode, if you press and
hold the * key, the keypad locks. In Idle mode, if you press and hold the # key, you can turn Vibration Mode on
and off.
8. Microphone is used during phone calls and allows callers to hear you when you are speaking to them. It is also
used in making voice note recordings.
9. Cancel/Clear key in Menu mode, this key returns you to the previous menu level. In text editing mode, this key
deletes characters.
10. Power On/Off (Exit) key ends a call. Press and hold this key for two seconds to turn your phone on or off. While
in the Menu mode, it returns the phone to Idle mode and cancels your input.
11. Right Soft key allows you to select soft key actions or menu items. The option for the soft key displays on the
bottom, right portion of the screen. In Idle mode it provides access to the WIND applications on your SIM card
(contact your service provider for more information).
12. OK (Select) key allows you to accept the choices offered when navigating through a menu.
13. Navigation key scrolls through the phone’s menu options and acts as a shortcut key from Idle mode.
In Idle mode:
• Up key allows you to directly access the Call history.
• Down key allows you to directly access Contacts.
• Left key allows you to create a new message.
• Right key allows you to access your Inbox.
14. Display shows all the information needed to operate your phone, such as the received signal strength, phone
battery level, and time.
12
This phone also offers the convenience of a slideout QWERTY keyboard. To open the phone to access the keyboard,
rotate the phone 90 degrees to the left. Slide the top section of the phone up to open, as shown.
To view the display in landscape mode and access the keypad, slide the phone open as shown.
Back View of Your Phone
The following illustration shows the back view of the phone.
1
2
1. Camera lens allows you to take pictures.
2. Speaker allows you to hear the camera sounds and music played on the phone.
Understanding Your Phone
13
Side Views of Your Phone
The following illustrations show the external elements of your phone
1
3
2
4
1. Phone anchor allows you to connect a strap with which to carry the phone.
2.
Volume keys allow you to adjust the Ring volume in standby mode (with the phone open) or adjust the Speaker
When receiving an incoming call, if you press the volume key, you can mute the ring tone.
volume during a call.
If you press and hold the volume key, you can reject the call.
3. Power/Accessory Interface connector allows you to connect a power cable or optional accessories, such as a
USB/data cable or a hands-free headset.
4. Camera key allows you to take pictures when you are in camera mode. Launches the camera with a press.
Display
Display Layout
Your phone’s display screen provides a wealth of information about your phone’s status and options. The display has
three areas:
14
Icons
Text and Graphics area
Soft key function indicators
Icons at the top of the display let you monitor activity and status of your phone such as signal strength, battery level,
the type of incoming call or message, and alarms. The display also shows the current date and time.
The Text and graphics area displays messages, menus, instructions and any information that you enter, such as the
number you are dialing.
Soft key function indicators show the current functions assigned to the two soft keys.
Understanding Your Phone
15
Missed Messages Tab
The receipt of new messages is indicated in two locations on the phone’s screen: the New Messages Tab and in the
icon bar at the top of the screen.
ViieewwTaTbasbfosr
MiissssededCaCllsa,lls,
PiicctutruerMeeMsseasgsesa,ges,
Voice Notes,
or Audio Postcards.
Icons
This list identifies the symbols you’ll see on your phone’s display screen:
Shows the received signal strength. The greater the number of bars, the stronger the signal.
Shows the level of your battery. The more bars you see, the more power remains.
Displays when your phone is connected to a PC.
Displays when a call is in progress.
Displays when the phone is not receiving a signal.
Displays when the phone is in Airplane mode.
16
Displays when Bluetooth wireless technology is active.
Displays when a new text message is received.
Displays when a new voice mail is received.
Displays when a new picture message is received.
Displays when you set an alarm to ring at a specified time. For more details, see “Alarm” on page 87.
Displays when the Call Forwarding feature is active. For more details, see “Call forwarding” on page 82.
Displays when sound profile is set to Normal.
Displays when Vibration Mode is active.
Displays when sound profile is set to Driving.
Displays when sound profile is set to Outdoor.
Displays when sound profile is set to Silent.
Backlight time
A backlight illuminates the internal display and the keypad. When you press any key, the backlight comes on. It goes
off when no keys are pressed within a given period of time, depending on the setting in the Backlight time menu.
In Idle mode, press Menu
Settings
Personalize
Display settings
Backlight time and press
.
The On setting is how long the keypad backlight is on at full brightness. You can select 5 seconds
,
15 seconds, or 30
seconds
1. Highlight the On field and press
2. Select the amount of time you want the backlight to stay on and press
.
.
.
Understanding Your Phone
17
The Dim option selects an additional time that the backlight remains on at reduced brightness. You can select
Off 5 seconds 15 seconds, or 30 seconds
1. Highlight the Dim field and press
,
,
.
.
2. Select the amount of time you want the phone to delay before the phone dims and press
.
18
Section 4: Menu Navigation
Thissectionexplainsthemenunavigationforyourphone.Italsoincludesanoutlineofalltheavailablemenusassociated
with your phone.
Menu Navigation
You can tailor the phone’s range of functions to your needs using menus and sub-menus. Menus and sub-menus can
be accessed by scrolling using the Navigation keys or by using the shortcuts.
Menu Navigation
19
Accessing a Menu Function by Scrolling
1. In Idle mode, press Menu.
2. Scroll using the Navigation keys to reach a main menu (for example: Settings). Press the Select soft key or
to enter the menu.
3. If the menu contains sub-menus, (for example, Personalize), after highlighting the sub menu, press the Select
soft key or
.
If the menu you selected contains further options, repeat this step.
4. To scroll through the menus, press the Up or Down Navigation keys.
5. To confirm the chosen setting, press the Select soft key, or
.
6. To return to the previous menu level, press the Back soft key.
7. To exit the menu without changing the settings, press
.
Using Shortcuts
The menu items, such as menus, sub-menus, and options, are numbered and can be accessed quickly by using their
shortcut numbers. For the main menus, press the corresponding number keys (1 to 0) to access any one of the
shortcuts.
Example: Accessing the Security menu.
1. Press the Menu soft key.
2. Press
3. Press
4. Press
5. Press
for Settings.
for Personalize
.
for Phone settings.
for Security
.
20
Selecting Functions and Options
Your phone offers a set of customizable functions. These functions are arranged in menus and sub-menus, and
accessed using the two soft keys. Each menu and sub-menu allows you to view and alter the settings of a particular
function.
Soft Keys
The roles of the soft keys vary depending on the function you are currently using. The labels on the bottom line of the
display just above each key indicate their current role.
Right soft key
Left soft key
Selecting Options
To view the various functions and options available, you must select the one you want by:
1. Pressing the appropriate soft key.
2. Selecting the displayed function or the highlighted option, by pressing the Select soft key or
.
3. Viewing the next function or highlighting the next option on a list, by pressing the Down Navigation key.
4. Moving back to the previous function or option on a list, by pressing the Up key.
5. Moving back up one level in the menu structure, by pressing the Back soft key.
6. Pressing
to exit the menu structure without changing the settings.
Menu Navigation
21
In some functions, you are asked for a password or PIN. Enter the correct code and press the Confirm soft key or
.
When you access a list of options, your phone highlights the currently active option. If, however, there are only two
options, such as On/Off or Enable/Disable, your phone highlights the option that is not currently active, so that you
can select it.
22
Section 5: Call Functions
This section describes how to make or answer a call. It also explains the features and functionality associated with
making or answering a call.
Making a Call
From the idle screen, enter the number you wish to dial and press
.
Note: When you activate the Auto redial option in the Auto redial menu, the phone automatically redials up to 10 times when the person
does not answer the call or is already on the phone, provided your call is not sent to voice mail.
Making an International Call
1. Press and hold the
2. Enter the country code, area code, and phone number.
3. Press to make the call.
key. The + character displays.
Correcting the Number
1. Press
to clear the last digit displayed.
2. Press the Left or Right Navigation key until the cursor is immediately to the right of the digit to clear and then
press
to clear any other digit in the number. You can also enter a missing digit.
3. Press and hold the
key to clear the entire display.
Ending a Call
Briefly press
when you want to end your call.
Call Functions
23
Redialing the Last Number
The phone stores the numbers of the calls you’ve dialed, received, or missed.
To recall any of these numbers:
1. From the Idle screen, press the Up Navigation key to display a list of the most recent numbers used in the order
calls were dialed or received.
2. Use the Up and Down Navigation keys to scroll through the numbers and highlight the number you want.
3. To view the details of this call, press
.
Before you dial the number, you may also press the Options soft key to display the following options:
• Details: displays the details for the selected contact such as the contact name and phone number.
• Voice Call: allows you to call the selected number.
•
•
Copy to dialing screen: copies the phone number to the dialing screen
Save in Contacts: saves the caller’s name and number in Contacts (or updates an existing contact).
• Send message: allows you to send a Message to the number.
• Delete: allows you to delete the selected number or All call records.
•
View contact details: for numbers stored in Contacts, this option displays contact information related to the number.
4. Press to dial the number.
Making a Call from the Phonebook
You can store regularly used phone numbers into the phone’s memory (Contacts).
Once you store a number in Contacts, you can press only a few key to dial the stored number. By using the Speed Dial
feature you can also assign your most frequently-used numbers to number keys.
Adjusting the Call Volume
During a call, use the Volume keys on the left side of the phone to adjust the speaker volume.
Press the Up volume key to increase the volume level and the Down volume key to decrease the level.
In Idle mode, you can also adjust the ring volume using these keys.
24
Important!: For safety information related to Call Volume, see “Appendix B: Safe and Responsible Wireless Phone
Answering a Call
When somebody calls you, the phone rings and displays the incoming call image, if an image is stored in the
phonebook. The caller’s phone number, or name if stored in Phonebook, displays.
1. Press
or the Accept soft key to answer the incoming call.
Tip: If the Any key answer option in the Settings
Call settings Answering mode menu is activated, you can press any key to
answer a call except for the
Note: To reject an incoming call, press the Reject soft key or
.
2. Press
to end the call.
Note: You can answer a call while using the Phonebook or menu features. After ending the call, the phone returns to the function screen
you were previously using.
Call history
All missed, dialed and answered calls are listed in the Call history.
1. In Idle mode, press Menu Call history and press the Select soft key or
to enter the menu.
– or –
Press the Up Navigation key.
Tip: Scroll Left or Right to access All calls, Missed calls, Dialed calls, and Answered calls.
The following Call history options are available:
Call Functions
25
All calls
This menu lets you view the 90 most recent calls you received, dialed, and missed.
The name or number, if already stored in your Contacts, displays with the number of occurrences for each number.
Note: At any time while you are in Call history, use the Left or Right Navigation keys to scroll between All calls, Missed calls, Dialed
calls, and Answered calls.
Missed calls
This menu lets you view the 30 most recent calls you received, but did not answer. The name and number, if already
stored in your Phonebook, displays with the number of occurrences for each number.
Viewing Missed Calls
When you are unable to answer calls and miss one or more calls, the number of calls you missed displays on the idle
screen on the Missed Call tab, immediately after a call is missed.
To view a missed call immediately:
1. If the display is off, press the volume key to turn on the display.
The Missed Call tab displays the last missed call.
– or –
2. Press the Up Navigation key to view the Call history, then press the Right Navigation key to view
Missed calls
.
The number corresponding to the most recently missed call displays, if available.
3. To scroll through the missed calls, press the Up or Down Navigation key.
4. To call the displayed number, press
– or –
or press Options and select Voice call.
Press
to display call details.
26
5. Press the Options soft key for the following options:
• Details: displays the details for the selected contact such as the contact name and phone number.
• Voice Call: allows you to call the selected number.
•
•
Copy to dialing screen: copies the phone number to the dialing screen
Save in Contacts: saves the caller’s name and number in Contacts (or updates an existing contact).
• Send message: allows you to send a Message to the number.
• Delete: allows you to delete the selected number or All call records.
•
View contact details: for numbers stored in Contacts, this option displays contact information related to the number.
Note: You can press
at any time to exit the Missed calls feature.
Dialed calls
This menu allows you to view the 30 most recent calls you dialed. The name and number, if already stored in your
Phonebook, displays with the number of occurrences for each number.
Answered calls
This menu allows you to view the 30 most recently answered calls. The name, number, time and date display with the
number of occurrences for each number.
Delete records
This menu allows you to delete the selected call record or all call records.
1. Press the Up Navigation key to display the Call history menu.
2. Press Options and select Delete
3. Select Selected to delete the highlighted record, All to delete all records.
4. Press
5. At the Delete all? prompt, press Yes to delete all calls or No to cancel.
.
.
Call Functions
27
You can also delete All calls, Missed calls, Dialed calls or Answered calls using the Management Menu
1. Press Menu Settings Call settings Call log management Delete history and press
2. Highlight a selection and press
3. Press Delete
.
.
.
4. At the Delete? prompt, press Yes to delete all calls or No to cancel.
Vibration profile
Using Vibration profile, your phone doesn’t produce any sounds, it only vibrates. Vibration profile is convenient when
you wish to stop the phone from making any noise (in a theater for example).
In Idle mode, press and hold the
) displays.
key until the “Vibration profile on” message and the Vibration profile icon
(
To exit and reactivate the previous sound settings, press and hold the
the phone has returned to the previous profile.
key again until the display indicates that
Options During a Call
Your phone provides a number of control functions that are available for use during a call.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone off, so that the other person on a call cannot hear you.
Example: You wish to say something to a person in the room but do not want the person on the phone to hear you.
To switch the microphone off temporarily:
Press Mute. The other person can no longer hear you. The Mute icon (
) displays on the left above the name or
number of the caller.
To switch the microphone back on:
Press Unmute. The other person can hear you again.
Putting a Call on Hold
You can place the current call on hold whenever you want. You can also make another call while a call is in progress (if
your network supports this service).
28
To place a call on hold:
1. Press the Options soft key, highlight the Hold option, then press the Select soft key or
.
2. Press the Resume soft key to reactivate the call.
To make a new call while a call is in progress:
1. Press Options
New call and press the Select soft key or
.
2. Enter the new phone number that you wish to dial or press Search to look up the number.
3. Press Call to call the second number.
When there is an active call and a call on hold, you can switch between the two calls, making the held call active and
placing the active call on hold.
To switch between the two calls:
1. Press the Options soft key, select Swap, and press
on hold is then reactivated so that you can continue conversing with that person.
2. Press when you are finished or want to end the call.
. The current active call is placed on hold and the call
Using the Speakerphone
While on a call, you can use your Speakerphone by following these steps:
1. Press the Spkr on soft key.
2. To turn the Speakerphone off, press the Spkr off soft key.
Important!: For safety information related to speakerphone use, see “Appendix B: Safe and Responsible Wireless
Call Functions
29
Searching for a Number in Contacts
You can search for a number in Contacts during a call.
1. Press Options and select Contacts.
The Contacts screen displays.
With the Contacts entries displayed:
2. Enter the name that you wish to find in the textbox located above the entries. If you enter the first few letters of
the name, Contacts entries display starting with the first entry that matches your input.
Or, use the Up or Down Navigation key to highlight the contact that you desire.
3. To view the highlighted entry, press View. The Contact information displays.
Call Waiting
The Call waiting option must be set to Activate before you can answer an incoming call while another call is in
progress.
You are then notified of an incoming call with a call waiting tone.
To answer a new call while another call is in progress:
1. Press either the Accept soft key or
2. To switch between the two calls, press the Options soft key, highlight Swap and press the Select soft key
or
to answer the incoming call. The first call is automatically put on hold.
.
3. To end a call on hold, press Options End
Active call
,
Held call, or All calls and press
.
4. To end the current/remaining call, press
.
30
Making a Multi-Party Call
A multi-party call is a network service that allows up to six people to take part simultaneously in a multi-party or
conference call.
For further details about subscribing to this service, contact WIND customer service.
Setting up a Multi-Party Call
1. Call the first participant in the normal way.
2. Press Options New call.
3. Call the second participant in the normal way. The first call is automatically placed on hold.
4. To join the first participant to this multi-party call, press Options Conference call.
Note: These first two calls are then grouped together on screen and displayed with an adjacent number corresponding to the order in
which the calls were made.
Note: There are a maximum of two callers that can be joined to a single multi-party line. You cannot create two multi-party calls.
Having a Private Conversation With One Participant
When there are two or more participants in a multi-party session, it might be necessary to place one of those
participants on hold so that a private conversation can be held with a single caller. While you are in a multi-party call:
1. Press OptionsPrivate call.
The short list of call participants displays with the first caller selected.
2. Press the Up or Down Navigation key to highlight the person with which you want to talk privately, and press
the Select soft key or
.You can now talk privately to that person while the other participant is on hold.
3. To return to the multi-party call, press the Options Conference call. The other participant can now hear
your conversation.
Dropping Participants
If you are participating in the multi-party call:
1. Press Options End Select participant. A list of call participants displays.
Call Functions
31
2. Highlight each call you want to drop and press Mark to place a check mark in the selection box.
3. Press Drop to drop the participant(s).
If you are on a private conversation:
1. Press Options End and select Active call or Held call
2. Press Drop to drop the participant(s).
Ending the Call
.
1. Press Options End All calls. A list of call participants displays.
2. Press Drop to drop all participants.
32
Section 6: Entering Text
ThissectionexplainsthevarioustextinputmodesforenteringcharactersintoyourphoneusingtheQWERTYkeyboard
and the phone keypad. It also describes how to use the T9 predictive text entry system to reduce the number of key
strokes required for entering text using the keypad.
Using the QWERTY Keyboard
This phone offers the convenience of a slideout QWERTY keyboard. Using the keyboard, you can type letters,
numbers, punctuation, and other special characters into text entry fields or other applications simpler and faster than
using the telephone keypad.
The following keys perform special functions when entering text:
9
1
8
7
2
3
4
5
6
1. Left Soft Key allows you to select soft key actions or menu items corresponding to the indicator at the bottom
left of the display screen.
2. Alt allows you to use characters displayed at the top of the QWERTY keys. Examples: $, @, #, !
3. OK (Select) key allows you to accept the choices offered when navigating through a menu.
Entering Text
33
4. Symbol/Shift press once to enter the next character in upper case. Press twice to shift the text input mode to all
upper case. Press this key and the Alt key together to display the Symbols page, where you can choose from an
extensive list of symbols and other character sets.
5. WWW./.COM inserts the www. or .com when entering a URL in the browser, or when logging in to Instant
Messenger.
6. Space inserts a space.
7. Enter moves the insertion point to the next line in a message.
8. Right Soft key allows you to select soft key actions or menu items corresponding to the indicator at the bottom
right of the display screen. In Idle mode the Right soft key also provides quick access to your Browser.
9. Backspace deletes the character in front of the cursor.
The keyboard provides dual-use keys labeled with alphabetic characters on the lower half and numbers and symbols
on the upper half. to enter the character on the lower half of the key, press the key. To enter characters on the upper
half of the key, press Alt and then press the key.
Changing the Text Input Mode
Your phone has the following text input modes:
•
•
ABC: Alphabet mode allows you to enter letters by pressing the key labeled with the corresponding letter.
T9 Abc: this mode allows you to enter words with only one keystroke per letter. Each key on the keypad has more than one letter;
for example, you press
to enter J, or K. However, the T9 mode automatically compares the series of keystrokes you make
with an internal linguistic dictionary to determine the most likely word, thus requiring fewer keystrokes than the traditional ABC
mode.
•
•
Numeric: this mode allows you to enter numbers.
Symbol: this mode allows you to enter symbols.
Note: When you are in a field where you can enter characters, such as when writing a text message, the text input mode indicator displays
at the bottom right of the screen.
Important!: The handset does not maintain text input mode settings when switched from portrait to landscape
mode.
34
Create Text Message Landscape
Create Text Message Portrait
1. Press the Right soft key to change the text input mode.
The following options are available:
•
•
•
•
ABC
T9 (English)
Numeric
Symbol
2. Highlight a selection and press Select.
Using ABC mode
To use ABC mode and the phone keypad to enter your text, press each key multiple times until the letter you want
displays.
1. Press the key labeled with the letter you want:
•
•
•
Once to enter the first letter
Twice in quick succession to enter the second letter
Three times in quick succession to enter the third letter
Entering Text
35
•
Four times in quick succession to enter the fourth letter
2. Select the other letters in the same way.
•
•
To enter periods, hyphens, apostrophes, and other special characters, press and hold the
then press the key that contains the associated symbol.
key
To shift case in ABC mode, press
. There are three selections: Upper case, Initial capital, and Lower case. The
current selection is indicated in the upper right corner of the display.
Note: You can move the cursor by using the Navigation keys.
To delete letters:
Press
. Press and hold the
key to clear the display.
Note: The cursor moves to the right when you press a different key. When entering the same letter twice or a different letter on the same
key, just wait for a few seconds for the cursor to automatically move to the right, and then select the next letter.
Keys
By default, the first letter of an entry is capitalized and all consecutive letters are kept in lowercase (unless the
key is used). After a character is entered, the cursor automatically advances to the next space after two seconds or
when you enter a character on a different key.
Characters scroll in the following order (lowercase characters shown in parentheses):
.@,:?-!’/1
PQRS7 (pqrs7)
TUV8 (tuv8)
ABC2 (abc2)
DEF3 (def3)
GHI4 (ghi4)
WXYZ9 (wxyz9)
insert a space
inserts zero when held
36
JKL5 (jkl5)
Press and hold to display symbols.
Press to shift case.
MNO6 (mno6)
Using T9 Mode
T9 is a predictive text input mode that allows you to key in any character on the keypad using single keystrokes. This
text input mode is based on a built-in dictionary.
To enter a word in T9 mode:
1. Start entering a word by pressing the keys corresponding to the letters in the word. Press each key only once
for each letter.
Example: To enter “Hello” in T9 mode, from the portrait keyboard, press the 4, 3, 5, 5, and 6 keys.
As you type, the characters on the screen change as the built-in dictionary matches your keystrokes to
commonly used words. Enter all letters in the word without editing or deleting the keystrokes.
2. If the word displayed is not correct, press
to display an alternative choice. Continue until the correct
word displays or no choices remain, at which time you can add the word to the phone’s dictionary (see below).
3. Press
to insert a space and begin entering the next word.
To enter periods, hyphens, apostrophes, and other special characters press the Right soft key and select Symbol to
display the Symbols page, where you can choose from an extensive list of symbols and other character sets.
To shift case in T9 mode, press
. There are 3 selections: Upper case, Initial capital, and Lower case.
Use the navigation keys to move the cursor.
To delete characters, press
. Press and hold
to clear the display.
Add a word to the T9 dictionary
When displaying alternative words and you press
on the last word available, the left soft key changes to Spell.
1. Press Spell and enter the word you want.
•
To shift case, use
to toggle between Initial Capital, Upper Case and Lower Case modes.
Entering Text
37
•
•
You can move the cursor using the left and right navigation keys.
To delete letters, press . Press and hold to clear the display.
2. Press Add. The word is added to the T9 dictionary and becomes the first word for the associated key presses.
Using Numeric Mode
Numeric mode allows you to enter numbers into a text message.
Press the keys corresponding to the digits you want to enter.
Using Symbol Mode
Symbol mode enables you to insert symbols and punctuation marks into text.
To display a list of symbols:
1. Press the Right soft key and select Symbol
.
2. Press the corresponding number key to select a symbol.
•
•
•
Press the Navigation keys to display more symbols.
Press the
key to clear the symbol(s). When the input field is empty, this key returns the display to the previous mode.
Press the OK soft key or
to insert the symbol(s) into your message.
38
Section 7: People
This section explains how to use and manage your Contacts list.
Using Contacts List
Use the following procedures to store a new contact to your phone.
Storing a Number in the Phone’s Memory
The default storage location for saving phone numbers to your phonebook is your phone’s built-in memory.
1. In Idle mode, press Menu and select People Add new contact.
2. In the Create contact screen, enter the information you want to save for this contact. The following fields are
available for input:
•
•
•
•
•
•
•
First name: For recording the contact’s first name.
Last name: For recording the contact’s last name.
Display name: the name you want to appear onscreen when a call is received from this contact (can be a nickname, etc.)
Mobile: Allows entry of a mobile phone number for this contact.
Landline: Allows you to enter a home number for this contact.
Email: For recording an e-mail address.
Group: Lets you assign this contact to one or more groups. Press
Highlight a group and press or Select
or Options
Select to open the Group screen.
.
•
•
•
Picture ID: Lets you assign a graphic ID for this contact. You can take a picture or assign an existing picture, downloaded
graphic or default image.
Ringtone: Allows you to choose a ring that plays when this contact calls. Press
Media menu and select a ring tone.
or Options
Select to open the
Notes: Lets you add any other information you wish to record with this contact.
3. Press Save to save the new contact.
4. Press to return to Idle mode.
Finding a Contact Entry
You can find names and their corresponding phone numbers in the phone’s Contacts list.
People
39
1. In Idle mode, press Menu and select People Contacts.
2. Enter the first few letters of the name in the text box.
Entries are listed starting with the first entry matching your input.
3. If needed, press the Up or Down Navigation key until the entry you want highlights.
4. Once you locate the entry, press
options:
to dial the number, or press the Options soft key to access the following
• View: displays the contact information.
• Create contact: takes you to the Create contact menu.
• Call: places the call to the selected phone number.
• Send message: allows you to send a message to the selected number.
• Edit: allows you to edit the Name and number for the selected contact.
•
Duplicate: Creates a duplicate record that you can edit to create a new contact entry (for example, when adding a new
contact at the same company as an existing contact).
• Delete: allows you to delete the selected name and number from your Phonebook, multiple numbers or all numbers. You are
asked to confirm the deletion by pressing the Yes soft key. To cancel, press the No soft key.
• Send namecard via: allows you to send your name card via Message or Bluetooth.
•
My namecard: lets you enter or change your Namecard information.
• Assign speed dial: allows you to assign a speed dial key number to the selected Phonebook entry.
• Copy to phone/SIM card: copies the selected or all of the contacts to the phone or SIM card. Depends on where the contact
was previously saved.
• Move to phone/SIM card: moves the selected or multiple contacts to the phone or SIM card. Depends on where the contact
was previously saved.
• Service number: displays your phone’s service number (supplied by your service provider).
• FDN contacts: opens the FDN (Fixed Dialing Number) list. If FDN is enabled (see “Set FDN mode” on page 75), the phone can
only call numbers in the FDN list. To add a contact to the list, press Options and select Create FDN contacts
Copy to FDN contacts: copies the highlighted contact to the FDN list. This procedure requires entry of your phone’s PIN2 code.
• Print via Bluetooth: sends the contents of the selected text message to a Bluetooth enabled printer.
.
•
40
•
•
Settings: opens the Management screen, where you can view and change you Contacts settings: View contacts (All,
Phone memory, SIM memory), Default saving (Phone, SIM card, Ask on saving), Copy all to (Phone, SIM card), You can
also Delete all (All, Phone, SIM card) and view Memory status.
Memory status: shows the number of contact records and capacity for Phone, SIM card and FDN list.
5. Press
to view contact information and press the Options soft key to view the following options:
• Edit: allows you to edit the name and number fields in the entry. You can also add an e-mail address and notes.
• Call: places the call to the selected phone number.
• Send message: allows you to send a message to the selected number.
• Delete: allows you to delete the selected name and number from your Phonebook.
•
Mark as default number: allows you to select the default number for the contact.
• Send namecard via: allows you to send your name card via Message or Bluetooth.
•
Copy to phone/SIM card: copies the selected or all of the contacts to the phone or SIM card. Depends on where the contact
was previously saved.
• Move to phone/SIM card: moves the selected or multiple contacts to the phone or SIM card. Depends on where the contact
was previously saved.
• Print via Bluetooth: sends the contents of the selected text message to a Bluetooth enabled printer.
Groups
Using Group you can organize your contacts into groups such as Family, Friends and Work. You can assign a unique
Caller ID or ring tune to members of a group.
Adding Contacts to a Group
1. From the Idle screen, press Menu and select People Groups.
2. Using the up and down navigation keys, scroll to the group that you wish to add the contact(s) to and press
.
3. Press Options and select Add member. The Contacts list opens.
4. Using the up and down navigation keys, scroll to each name to be added to the Group and press
a check mark in the selection box beside the name.
to place
People
41
To find a specific name, begin entering the letters of the name. As you type, the first Contact List entry matching
your input is highlighted. To select a different entry, press the up or down navigation key until the entry you want
is highlighted.
5. When you are finished selecting names, press Add. The selected contacts are added to the group.
Adding a New Caller Group
1. In Idle mode, press Menu and select People Groups
.
2. Press the Options soft key and select the Create group option.
3. Enter a name for the new group in the New group field and press Save
.
4. Highlight the group name, press Options and select Group settings. You can change the following settings:
•
•
Highlight the Picture field and press
to select a Picture ID for this new caller group.
to select a ringtone for this new caller group.
Highlight the Ringtone field and press
5. When you are finished, press Options and select Save
6. Press to return to Idle mode.
Editing a Caller Group
1. In Idle mode, press Menu and select People Groups
.
.
2. Scroll through the group list, highlight the group you want, and press the Options soft key.
3. To edit the group name, press Options and select Rename. Backspace and enter a new name for the group, then
press Save
To change the image associated with the group, press Options and select Group settings.Highlight Picture and
press . Select an image from one of the folders.
To change the ringtone associated with the group, press Options and select Group settings. Highlight the
Ringtone field and press . Select a sound from the Sounds folder.
4. Press Options and select Save when you are finished. Your Caller group settings are saved.
5. Press to return to Idle mode.
.
42
Speed Dial
Using Speed dial, you can assign up to eight phone numbers from Contacts that you use most frequently to the
number keys 2 to 9, and then dial them whenever you want simply by pressing and holding the associated number
key.In Idle mode, to speed dial the numbers assigned to keys (2 to 9), press and hold the appropriate key.
Setting Up Speed Dial Entries
1. In Idle mode, press Menu and select People Speed dial.
2. Use the Navigation key to select the keypad number key to where you wish to assign the new speed-dialing
number, press Options and select Assign Contacts or FDN contacts.
3. Highlight a contact entry number from the list and press the Select soft key or
.
4. You receive a Speed dial assigned confirmation and the Speed dial menu displays the contact assigned to the
number key you selected.
5. Press
to return to Idle mode.
Note: Memory location 1 is reserved for your Voice mail server number and this speed dial location can not be changed.
Management
To access the Management menu:
In Idle mode, press Menu and select People Management.
View Contacts
This option allows you to select whether Contacts displays All contacts stored on the Phone and SIM card, Phone
memory only, or SIM card only.
Default saving
The Default saving option allows you to choose where your contacts are saved. The following options are available:
–
–
–
Phone: new phonebook contacts are saved to your phone. This is the default setting for your phone.
SIM card: new phonebook contacts are saved to your SIM card.
Ask on saving: you are prompted to choose between Phone or SIM Card whenever you save a new contact.
People
43
Copying all Contact Entries
You can copy any or all Contact entries to the SIM card or to the phone.
Note: When storing a Contact entry on the SIM card, only the Name, Address, and slot location are saved.
1. In Idle mode, press Menu and select People Management
Copy all to.
2. Highlight Phone or SIM card and press the Select soft key or
.
Highlight each contact you want to copy and press
and press to select all entries.
3. Press Copy to copy the selected contacts to the Phone or SIM card.
to place a check mark next to the entry. Or highlight All
Delete all
Important!: Once contact entries are deleted, they cannot be recovered.
This option allows you to delete all your contacts from the phone, SIM card, or both.
Deleting all Phonebook Entries
Perform the following procedure to delete all entries from your phone and/or SIM card.
1. In Idle mode, press Menu and select People Management Delete all.
2. As required, highlight All
,
Phone, or SIM card and press the Select soft key or
.
3. You are asked to confirm the deletion by pressing the Yes soft key. To cancel, press the No soft key.
4. Press the Back soft key or
to return to Idle mode.
Memory status
You can view the amount of the allocated memory and the memory available for contact entries on the Phone and SIM
card, as well as on the FDN list.
The display shows the used and available space.
In Idle mode, press Menu and select People Management Memory status.
44
My Number
This function is a memory aid you can use to view your own phone number.
In Idle mode, press Menu and select People My number.
Using the Service Dialing Numbers
You can view the list of Service Dialing Numbers (SDN) assigned by your service provider. These numbers include
emergency numbers, customer service numbers and directory inquiries.
In Idle mode, press Menu and select People Service number. The service numbers display.
People
45
Section 8: Messages
This section describes how to send and receive different types of messages. It also explains the features and
functionality associated with messaging.
Types of Messages
Your phone provides the following message types:
•
•
Text Messages: Short Message Service (SMS) allows you to send and receive short text messages to and from other mobile
phones.
Picture Messages: Multimedia Messaging Service (MMS) allows you to exchange messages containing text, graphics, and audio
attachments with other MMS capable phones.
Note: You must have a subscription to WIND's message service in order to use messaging.
You can also use your phone to access Voice Mail (recorded voice) messages.
Display Icons for Messages
When your handset receives new messages, icons display on the screen in two locations: on the View Tab that
displays on the lower portion of the screen, and on the top of the screen (see “Display Layout” on page 14.)
Message Icons on the Icon Line
The
icon displayed at the top of the screen indicates that a new text message was received. The
icon
indicates a new picture message was received. The
icon indicates a new voice mail message was received.
46
Missed Messages Tab
The Missed Messages Tab is an area that displays on the screen when calls are missed a text or picture message is
received, or a voice mail message is received.
View Tabs for
Missed Calls,
Picture Messages,
Voice Notes,
or Audio Postcards
The following message tabs can be displayed:
1.
2.
3.
4.
Text message
Missed Calls
Voice mail
Picture message
You can view missed calls or unviewed messages by using the Right and Left navigation keys to select the
associated message tab. Press View to open a message or see call details, Dial to retrieve your voice mail.
Create and send a message
Use the Create message menu to compose new text (SMS) and picture (MMS) messages and send them to other
messaging-capable phones.
1. In Idle mode, press Menu
Messaging, select Create message and press the Select soft key or
.
Messages
47
2. Highlight the Recipients field and press
.
3. Select one of the following options:
•
Contacts: allows you to enter the phone number you want from your Contacts list.
• Group: allows you to select a group.
• Recipient list:: allows you to create a list of up to 10 recipients for the message.
– or –
Enter a phone number in the recipients field.
4. Press the Down Navigation key and create your message.
Note: For further information on entering characters, see “Changing the Text Input Mode” on page 34.The message can be up to 2295
characters.
5. Press the Options soft key when you finish entering your message. The following options are available:
• Send: sends the message.
•
Add multimedia: Lets you add an Image, Video or Sound; Take photo, Record video, Record audio.
Note: Adding multimedia content to a text message changes it to a picture (MMS) message.
• Insert: allows you to insert Text template, Text emoticon, or Bookmarks. Text template allows you to add content from a
previously stored message template to the message. Text emoticon provides a selection table of text emoticons (images of
facial expressions created using keyboard characters). Bookmarks allows you to add Internet addresses to your message.
• Edit text: allows you to turn on the text selection feature so you can cut, copy, and paste text in this message.
• Input language: Lets you switch the input language between English and Français (French).
• Advanced
–
Add attachment: allows you to add a File, Name card, Appointment, Anniversary, Private, Holiday, Important, Tasks, Memo,
Bookmarks. to the message.
–
–
–
Add subject:: allows you to add a subject to this message.
Add page: allows you to add a page, for example, another image or sound clip to the message.
Change to picture message: changes the message type to picture message
Note: Adding multimedia content to a text message changes it to a picture (MMS) message.
48
–
Sending options:
Reply path:: allows the recipient of your message to send you a reply message using your message center, if your network supports
this service.
Request delivery report:: allows you to activate or deactivate the report function. When this option is enabled, the network informs
you whether or not your message was delivered.
• Save in: allows you to save this message to Drafts or Templates.
6. Press to send this message.
Inbox
The Inbox stores received messages. When you open the Inbox, the list of messages displays with the sender’s
phone number or name (if available in your Phonebook).
You can tell the kind of message received by the icon displayed. The following types of messages may display in your
inbox:
Text message
Picture message
If the icon envelope is closed the message has not been read, if it is open then the message has been read.
Tip: Press the Left or Right Navigation keys to scroll between Inbox, Sentbox, Drafts, My folders, and Templates.
Viewing a Text Message from the Inbox
1. In Idle mode, press Menu and select Messaging Inbox.
2. Highlight a text message from the list and press the Options soft key.
The following options display:
• View: opens the message.
• Reply: allows you to send a reply to the sender by sending a message.
• Forward: allows you to forward the text message to another person.
• Delete: deletes Selected, Multiple, or All text messages.
•
Move to phone/SIM card: allows you to move the message from the SIM card into the phone’s memory or from the phone onto the SIM
card. Depends on where the current message was saved.
•
•
Move to my folders: allows you to move the Selected message or Multiple messages to a personal folder.
Sort by: allows you to sort messages by Date, Sender, Type, Subject, Size, and Protection.
Messages
49
• Save to Contacts: allows you to save the contact information to your Contacts list. This option displays only when the number
is not already included in the Contacts list.
• Lock/Unlock: allows you to lock this message to protect it from deletion or unlock it to allow deletion.
3. Press
to read the message contents.
Press the Up or Down Navigation key to scroll through the contents.
Press the Options soft key while reading a text message to display the following:
• Reply: allows you to send a reply to the sender by sending a message.
• Delete: deletes the Selected message.
• Forward: allows you to forward the text message to another person.
• Save to Contacts: allows you to save the contact information to your Contacts list. This option displays only when the number
does not reside in the Contacts list. This options displays only if the contact does not already reside in the Contacts list.
•
Move to phone/SIM card: allows you to move the message from the SIM card into the phone’s memory or from the phone onto the SIM
card. Depends on where the current message was saved.
•
•
Move to my folders: allows you to move the Selected message or Multiple messages to a personal folder.
Print via Bluetooth: allows you to print the message using a Bluetooth enabled printer.
• Lock/Unlock: allows you to lock this message to protect it from deletion or unlock it to allow deletion.
Viewing a Picture Message from the Inbox
1. In Idle mode, press Menu Messaging Inbox and press the Select soft key or
2. Select a picture message from the list and press the Options soft key.
The following options display:
.
• View: opens the message.
• Reply to: allows you to send a reply to the sender by sending a message.
• Forward: allows you to forward the message to another person.
• Call sender: allows you to call back the message sender.
• Delete: deletes the Selected, Multiple, or All messages.
•
Sort by: allows you to sort messages by Date, Sender, Type, Subject, Size, and Protection.
• Save to Contacts: allows you to save the contact information to your Contacts list. This option displays only when the number
is not already included in the Contacts list.
• Lock/Unlock: allows you to lock this message to protect it from deletion or unlock it to allow deletion.
50
3. Press
to view the message contents.
4. Press the Options soft key while viewing a picture message to display the following:
• Play: plays an attached multimedia file.
• Reply: allows you to send a reply to the sender.
• Reply to all: allows you to send a reply to the sender and other recipients of the message.
• Forward: allows you to forward the message to another person.
• Call sender: allows you to call back the message sender.
• Delete: deletes the selected message.
•
Move to my folders: allows you to move the message to a personal folder.
• Save to Templates: saves the message in the Templates folder for future use.
• Save items: lets you save the message attachments to your Media folders.
• Save to Contacts: allows you to save the contact information to your Contacts list. This option displays only when the
number is not already included in the Contacts list.
• Print via Bluetooth:lets you print the message using a Bluetooth-enabled printer.
• Lock/Unlock: allows you to lock the picture message to prevent deletion, or unlock it to allow deletion.
•
Properties: displays picture message properties, such as Date, To, Size, Priority, Expiration, Hide address, Delivery report,
Read report.
Sentbox
This message box stores sent messages.
When you enter this menu, the list of messages in the Sentbox displays with the recipients’ phone numbers or
names, if available in your Phonebook.
1. In Idle mode, press Menu and select Messaging Sentbox.
Note: Press the Left or Right Navigation keys to scroll between Sentbox, Drafts My folders, Templates, and Inbox.
,
2. Select a message from the list and press
to view the message contents.
3. To scroll through the contents, press the Up or Down Navigation keys.
4. Press Options and select one of the following options:
• View: lets you view the message.
Messages
51
• Delete: deletes the Selected, Multiple, or All messages.
•
Move to phone/SIM card: allows you to move the message from the SIM card into the phone’s memory or from the phone onto the SIM
card. Depends on where the current message was saved.
•
•
Move to my folders: allows you to move the Selected message or Multiple messages to a personal folder.
Sort by: allows you to sort messages by Date, Recipient, Type, Subject, Size, and Protection.
• Lock/Unlock: allows you to lock the selected message to protect it from deletion, or unlock it to allow deletion.
If a Picture message is selected the following options display:
• View: lets you view the message.
• Forward: allows you to forward the message to another person.
• Delete: deletes the Selected, Multiple, or All messages.
•
•
Move to my folders: allows you to move the Selected message or Multiple messages to a personal folder.
Sort by: allows you to sort messages by Date, Recipient, Type, Subject, Size, and Protection.
• Lock/Unlock: allows you to lock the selected message to protect it from deletion, or unlock it to allow deletion.
•
Properties: displays picture message properties, such as Date, To, Size, Priority, Expiration, Hide address, Delivery report,
Read report.
Drafts
This message box stores messages that you may want to edit or send at a later time.
When you enter this menu, the list of messages in the box displays.
1. In Idle mode, press Menu and select Messaging Drafts.
Note: Press the Left or Right Navigation keys to scroll between Drafts My folders, Templates, Inbox and Sentbox.
,
2. Select a message from the list and press the Options soft key.
The following options display:
• Edit: lets you edit the template content.
• Send: sends the message to Recent recipients, Contacts, or Groups.
• Preview: allows you to preview a picture message.
• Delete: deletes the Selected message, Multiple messages or All messages.
•
•
Move to my folders: allows you to move the Selected message or Multiple messages to a personal folder.
Sort by: allows you to sort messages by Recipient, Type, Subject, Size, and Protection.
52
• Lock/Unlock: allows you to lock this message to protect it from deletion or unlock it to allow deletion.
•
Properties: displays picture message properties, including Date, To, Size, Priority, Expiration, Hide address, Delivery
report, Read report.
3. Press
to view the message contents.
4. Press the Options soft key while viewing a message to access the following:
Note: Some options apply to Text messages, and other options apply to Picture messages only.
• Add recipients: Lets you add recipients from Recent contacts, Contacts or Group (only appears when no recipients are specified
in teh draft meessage).
• Send: sends the message to Recent recipients, Contacts, or Groups.
• Preview: allows you to preview a picture message.
•
Add multimedia: Lets you add an Image, Video or sound; Take photo, record video, Record audio.
• Insert allows you to insert Text template, Text emoticon, Bookmarks. The Text template allows you to add content from a
previously stored message template to the message. Text emoticon provides a selection table of text emoticons (images of
facial expressions created using keyboard characters). Bookmarks allows you to add Internet addresses to your message.
•
•
•
Edit text: Lets you turn Text selection on or off to allow editing.
Input language: Lets you switch the input language between English and Français (French).
Advanced:
–
–
–
–
–
–
Add attachment: allows you to add an attachment to the message.
Add subject: allows you to add a subject to the selected picture message.
Add page: allows you to add a page, for example, another image or sound clip to the message.
Edit style: allows you to change the background color, page duration, font color, or font style on the selected page or all pages.
Change to text message:/picture message: converts message type.
Sending options: Lets you change text message sending options (Replay path, Request delivery report) or Picture message
sending options (Priority, Expiration, Delivery time, Hide address, Request delivery report, Request read report, Keep a copy).
•
Save in: lets you save the message to Drafts or Templates.
5. To send the message, press Options and select Send while viewing the message.
My Folders
Use My Folders to manage and organize your messages and store them on your phone.
Messages
53
1. In Idle mode, press Menu and select Messaging
My folders.
To create a new folder
:
1. Press the Options soft key and select Create folder (if no folders have been created, press the Create soft key).
2. Enter the title of the folder and press the OK soft key.
The newly created folder displays on the My folders screen.
Templates
Besides entering message text using the keypad keys, you can speed message composition by including copies of
stored messages (Templates) in your message.
The following options are available:
–
Text message templates
–
Picture message templates
Create a Template
To create a text template:
1. From the Idle screen, press Menu and select Messaging Templates Text message templates or
Picture message templates.
2. Press Options and select Create. Enter the text you want to save as a template.
3. While the template screen is open, you can also press Options to access the following options (some options
available for picture messages only):
•
Add multimedia: Lets you add an Image, Video or Sound; Take photo, Record video, Record audio.
• Insert allows you to insert Text template, Text emoticon, Bookmarks. The Text template allows you to add content from a
previously stored message template to the message. Text emoticon provides a selection table of text emoticons (images of
facial expressions created using keyboard characters). Bookmarks allows you to add Internet addresses to your message.
•
Input language: Allows you to temporarily change the input language used to create your message between English and
Français (French).
•
Advanced:
–
–
–
Add attachment: allows you to add an attachment to the message.
Add page: allows you to add a page, for example, another image or sound clip to the message.
Edit style: allows you to change the background color, page duration, font color, or font style on the selected page or all pages.
54
4. Press Save to save the template.
Use a Template
To access templates:
1. From the Idle screen, press Menu and select Messaging Templates.
2. Scroll to a template and press OK to enter the text directly into a new text message or Options to access the
following options:
•
•
•
•
•
View: Displays the message content (picture message only).
Send: Opens a new message containing the template content (picture message only).
Create: lets you create a new template.
Edit: Allows you to edit the template text.
Delete: Allows you to delete the selected template, multiple templates or all templates. Press Yes to confirm the deletion.
Settings
The Settings menu allows you to select where your contacts are saved, delete messages by folder, or check your
memory status.
In Idle mode, press Menu and select Messaging
Settings.
Messages settings
In this menu, you can set up a default text message or a picture message, configure the Text Message Center, view
the Voice mail number, and configure Push messaging Receiving or Service Loading options. The last setting you
accessed is automatically activated for sending subsequent messages.
In Idle mode, press Menu and select Messaging Settings
Messages settings.
Text message
The following Sending Options are available:
•
Reply path: allows the recipient of your message to send you a reply message using your message center, if your network
supports this service.
•
Request delivery report: allows you to activate or deactivate the report function. When this function is activated, the network
informs you whether or not your message was delivered.
Messages
55
Text Message Center
Sets the default method of text message transmission used by the Text message center.
Picture message
The following options are available:
Sending options
–
Priority: allows you to set the message priority: High, Normal or Low.
–
Expiration: allows you to select the length of time for your message to remain on the MMS server: Maximum, 1 Day, 2 Days, 1 Week,
2 Weeks, Custom time (Hour).
–
–
–
–
–
–
Delivery time: sets time before message delivery: Immediately, 1 Hour, 1 Day, 1 Week, Custom time (Hour)
Message size: allows you to set a size limit for your message: 30 KB, 100 KB, 300 KB.
Request delivery report: when this option is enabled, the network informs you whether or not your message was delivered.
Request read report: when this option is enabled, the network informs you when your message is read.
Keep a copy: when this option is enabled, a copy of your message is stored.
Add my name card: allows you to add your name card to your message.
Receiving options
This option specifies the category of messages you want to receive and allows you to set the following:
–
Send read report: when this option is enabled, your phone sends a notification back to the recipient indicating that your message
was received.
–
–
–
Send delivery report: when this option is enabled, the phone informs the network whether or not your message was received.
Reject anonymous: automatically rejects messages with a category of anonymous.
Reject advertisement: automatically rejects messages with a category of advertisement.
Auto resize image
–
No Resize, 100 KB, 300 KB
Creation Mode
–
Free, Warning, Restricted
Default style
–
Font color, Font style, Background color, Page duration
Voice mail
This menu displays the default phone number used for access of phone’s remote voice mail.
56
Broadcast Message
Broadcast messages are messages received from your service provider containing information related to a specific
area (cell).The following options are available:
•
•
•
•
Activation: Turns broadcast message reception On or Off.
Receiving channels: All channels or My channels (channel list saved in My channels, see below).
My channels: Lets you create a list of specific channels and save channel details (Channel ID, Channel title).
Language: All, English or Français (French).
Push message
•
Receiving options: you can specify whether to turn push message reception On or Off
.
•
Service loading: you can specify whether to load this service: Always, Prompt, Never
Delete by folder
This menu allows you to delete all messages or all messages in specific message boxes.
Important!: Messages are permanently deleted, they cannot be recovered.
1. In Idle mode, press Menu and select Messaging
Settings
Delete by folder
.
2. Select the boxes to be cleared by highlighting the box and pressing
to place a check mark in the selection
box. To delete all messages, highlight All and press
.
3. Press the Delete soft key to empty the marked boxes.
4. As required, press
to add or remove a check mark in the Delete? Locked messages confirmation box.
5. Press Yes to confirm message deletion or Cancel to cancel.
Memory status
To view the memory status:
In Idle mode, press Menu and select Messaging
Settings
Memory status.
You can view the amount of the allocated memory and the memory available for picture messages.
The display shows the total space including the used and free space. You can also view how much space and the
number of messages currently occupying each message box type:
Messages
57
•
•
•
Picture message
–
–
–
–
Inbox
Sentbox
Drafts
My folders
Text Message (saved on the phone)
–
–
–
–
Inbox
Sentbox
Drafts
My folders
Push message
–
Inbox
–
My folders
•
•
Broadcast messages
Inbox
Configuration
–
–
Inbox
–
My folders
58
Section 9: Media
The Media menu is used to manage your media files (audio, pictures, videos, games and apps, and other files).
Media files are organized in a series of folders. You can also create additional folders or sub-folders to further organize
your files.
Photos
In this menu you can view the photos you’ve stored on your phone or memory card.
1. From Idle mode, press Menu and select Media Photos.
If there is a microSD memory card in the phone, you can use the left and right navigation keys to switch
between phone and memory card access.
Note: When a memory card is inserted into the phone, a series of folders is automatically created on the card (Photos, Music, Images,
Sounds, Videos).
2. Use the Up or Down navigation key to highlight a particular image and press
3. Press to exit and return to the Idle screen.
to view the photo.
Note: The Photos menu is also available directly from the Main menu (from the Idle screen, press Menu and select Photos).
Wallpaper
To change the screen background image (“Wallpaper”):
1. From Idle mode, press Menu and select Media Photos.
2. Highlight a photo from the list and press the Options soft key.
3. Select Set as
Wallpaper.
4. Press the Set soft key to confirm your selection.
Your wallpaper selection updates.
Media
59
Photo Options
With the Photos folder open and a photo highlighted, press the Options soft key to choose from the following
options:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Send to: allows to to send the photo to one or more recipients in a picture message
Send via: allows you to send the photo as a Message or to another Bluetooth compatible device.
Set as: allows you to set the photo as Wallpaper or as a Picture ID.
Delete: allows you to delete the selected photo, multiple photos or all photos.
Move: allows you to move the selected photo or multiple photos to another location or folder.
Copy: allows you to copy the selected photo or multiple photos to another location or folder.
Rename: allows you to rename the selected photo file.
Take photo: opens the camera so you can take another photo.
Create folder: allows you to create a folder in which to store the selected photo.
Sort by: allows you to sort the photos by Date, Type, Name, or Size.
Bluetooth visibility: allows you to select one photo or multiple photos to share with other Bluetooth devices.
Print via Bluetooth: sends the selected photos to a Bluetooth enabled device.
Lock/Unlock: allows you to lock the photo to protect it from deletion or unlock it to allow deletion.
Properties: displays the image Name, Format, Resolution, Size, Forwarding, Date created, and Location.
While viewing a photo, press the Options soft key to choose from the following options:
•
•
•
•
•
•
•
•
•
Send via: allows you to send the photo as a Message or to another Bluetooth compatible device.
Set as: allows you to set the photo as Wallpaper or as a Picture ID.
Delete: allows you to delete the selected photo.
Rename: allows you to rename the photo.
Edit image: allows you to edit a new photograph for an outgoing message.
Bluetooth visibility: allows you to share the photo with other Bluetooth devices.
Print via Bluetooth: sends the selected photos to a Bluetooth enabled device.
Lock/Unlock: allows you to lock the photo to protect it from deletion or unlock it to allow deletion.
Properties: displays the image Name, Format, Resolution, Size, Forwarding, Date created, and Location.
60
Camera
1. In Idle mode, press Menu
Media
Photos
Camera and press
to access the menu.
Tip: Press the Camera key
on the right side of the phone as a shortcut access to the camera module.
2. Adjust the image by aiming the camera at the subject.
3. Press Menu to access the camera options. For details, see “Camera Options in Capture Mode” on page 106.
Tip: You can use the keypad to quickly change the camera options.
4. Press the Camera key
Music
In this menu you can manage the Music you’ve stored on the phone or memory card.
1. From Idle mode, press Menu and select Media Music
or
to take the photo.
.
2. Select a music file and press the Options soft key to choose from the following options:
• Send via: allows you to send the selected music file via Message or to a Bluetooth enabled device.
•
Set as: allows to use the music file as Ringtones, Individual ringtone, Alarm tone or Calendar reminder (music stored on the
phone only)
• Delete: allows you to delete the Selected, Multiple, or All music files.
• Move: allows you to move the selected music file or multiple files to another location or folder.
• Copy: allows you to copy the selected music file or multiple files to another location or folder.
• Rename: allows you to rename the selected music file.
•
•
Create folder: allows you to create a folder in which to store the selected music file.
Sort by: allows you to sort the music by Date, Type, Name, or Size.
• Bluetooth visibility: allows you to share one song or multiple songs with other Bluetooth devices (music stored on the
phone only).
•
Lock/Unlock: allows you to lock the photo to protect it from deletion or unlock it to allow deletion.
• Properties: displays Basic details about the selected music file such as Name, Format, Size, Forwarding, Date created,
and Location.
Media
61
Music Player
You can add music files or play music stored in your playlists.
Important!: Before you can play music you must organize a playlist. For more information, refer to “Creating a
1. From Idle mode, press Menu and select Media Music
2. Select All tracks Artists Albums or Playlists.
3. Highlight a music file and press to play the file or press the Options soft key to access the following options:
Music player.
,
,
• Add to playlist: allows you to add the Selected, Multiple, or All music files to a playlist.
• List by: allows you to display music files by category such as: Recently added, My rating, or Title.
• Delete: allows you to delete the Selected, Multiple, or All music files.
• Send via: allows you to send this music file in a Message or to a Bluetooth enabled device.
• Set as: allows you to set this music file as Ringtones, Individual ringtone, Alarm tone, or Calendar reminder.
• Properties: displays Basic details about the selected music file.
• Settings: allows you to configure settings such as Background playing, Sound effects, or Visualization.
Music Player Shortcut Keys
While playing a music file, the following keys act as shortcuts:
Up Navigation key opens the menu from which the music file was accessed.
Down Navigation key stops the playback of the music file.
Left Navigation key plays the previous music file in the playlist.
Right Navigation key plays the next music file in the playlist.
Creating a Playlist
Before music can be played directly via the Music Player, it is necessary that the desired playlist be active before
music is added. Unless otherwise selected, Playlist 1 is the default playlist when new music is added from either the
phone or memory card.
62
1. From Idle mode, press Menu and select Media Music
Music player.
2. Select Playlists Create playlist, enter a name for the playlist and press Save
.
Adding Music Files to a Playlist
1. From Idle mode, press Menu and select Media Music
Music player.
2. Highlight All tracks
,
Artists
,
Albums or Playlists to see a list of files and press
.
3. Highlight a music track to add to the playlist, press Options and select Add to playlist
.
4. Press the right navigation key and select Selected to add the selected file to the playlist, Multiple to add more
than one file, or All to add all files in the list.
The selected track(s) are added to the selected playlist.
Images
In this menu, you can view a list of images downloaded from the web server or received in messages. You can set a
wallpaper images supplied with the phone or another image as the phone’s background image.
From Idle mode, press Menu and select Media Images.
The following options are available:
Wallpapers
This folder contains a series of wallpapers images supplied with your phone
Scroll to the wallpaper you want to view and press the Options soft key to access the following options:
•
•
•
•
•
Set as: allows you to set the image as Wallpaper or as a Picture ID.
Take photo: allows you to take a photo and use that as a wallpaper.
Create folder: allows you to create a new folder in which to contain your own images.
Sort by: allows you to sort the images by Date, Type, Name, or Size.
Properties: displays the image name, format, resolution, size, forwarding, date created and location.
Downloaded images
This menu allows you to access your downloaded images on your phone.
Scroll to the image you want to view and press the Options soft key to access the following options:
•
Send to: allows to to send the image to one or more recipients in a picture message
Media
63
•
•
•
•
•
•
•
•
•
•
•
•
•
Send via: allows you to send the image as a Message or to another Bluetooth compatible device.
Set as: allows you to set the image as Wallpaper, or a Picture ID.
Delete: allows you to delete the Selected, Multiple, or All images.
Move: allows you to move the Selected or Multiple images to another location.
Copy: allows you to copy the Selected or Multiple images to another location.
Rename: allows you to rename the image.
Take photo: allows you to take another photo with the camera.
Create folder: allows you to create a new folder in which to store images.
Sort by: allows you to sort images by Date, Type, Name, or Size.
Bluetooth visibility: allows you to select one or multiple images to share with other Bluetooth devices.
Print via Bluetooth: sends the selected image to a Bluetooth printer.
Lock/Unlock: allows you to lock the image to protect it from deletion or unlock it to allow deletion.
Properties: displays Basic details or Media Information about the image.
Sounds
In this menu, you can view the list of sounds provided with the phone, downloaded from the web, received in picture
messages, or recorded using the voice recorder. You can also set a downloaded sound as the current ring tone.
1. From Idle mode, press Menu and select Media Sounds.
Sounds
This folder stores sounds provided with the phone, downloaded from the web or received in picture messages.
Highlight a file and press Play to hear the file or press the Options soft key to access the following options:
•
•
•
•
Set as: allows you to set the sound as Ringtones, Individual ringtone, Alarm tone or Calendar reminder.
Create folder: allows you to create a new folder in which to contain sounds.
Sort by: allows you to sort sound files by Date, Type, Name, or Size.
Properties: displays Basic details about the selected sound file.
Voice list
The Voice list contains your recorded audio messages. Highlight a file and press Play to hear the file or press the
Options soft key to access the following options:
•
•
Send via: allows you to send the audio message as a Message or to a Bluetooth compatible device.
Set as: allows you to set the audio message as Ringtones, Individual ringtone, Alarm tone, or Calendar reminder.
64
•
•
•
•
•
•
•
•
•
Delete: allows you to delete the Selected, Multiple, or All audio messages.
Move: allows you to move the Selected or Multiple audio messages to another location or folder.
Copy: allows you to copy the Selected or Multiple audio messages to another location or folder.
Rename: allows you to change the name of the audio message.
Create folder: allows you to create a new folder in which to contain audio messages.
Sort by: allows you to sort audio files by Date, Type, Name, or Size.
Bluetooth visibility: allows you share the Selected or Multiple voice messages with other Bluetooth devices.
Lock/Unlock: allows you to lock the audio message to protect it from deletion or unlocks it to allow deletion.
Properties: displays Basic details about the selected audio file.
Voice recorder
In this menu, you can record an audio file up to one minute long and send it in a message.
1. From Idle mode, press Menu and select Media Sounds Voice list Voice recorder.
2. Press Record or
and begin recording your voice message.
3. Press Stop when you are finished recording.
Press Options to access the following options:
•
•
•
•
Send via: allows you to send this voice recording as a Message or to another Bluetooth enabled device.
Set as: allows you to set this voice recording as a Ringtone, Individual ringtone, Alarm tone or Calendar reminder.
Delete: deletes the selected voice recording.
Properties: displays Basic details about this voice recording, such as: Name, Format, Size, Forwarding, Date created, and
Location.
Videos
In this menu, you can view the list of videos downloaded from the web or received in picture messages, view videos
saved to the Videos folder on the phone or memory card, and record videos.
This menu allows you to access your saved videos.
1. From Idle mode, press Menu and select Media Videos.
2. Highlight a video file and press
to play it or press Options to access the following options:
• Send via: sends the video using a Message or to a Bluetooth enabled device.
Media
65
• Delete: deletes the Selected, Multiple, or All video files.
• Move: allows you to move the Selected or Multiple videos to another location.
• Copy: allows you to copy the Selected or Multiple videos to another location.
• Rename: changes the name of the video.
• Create folder: allows you to create a new folder to contain your videos.
• Sort by: allows you to sort and view videos by Date, Type, Name, or Size.
• Bluetooth visibility: allows you to enable the Selected video or Multiple videos so they are visible to other Bluetooth devices.
• Lock/Unlock: allows you to lock the video to protect it from deletion, or unlock it to allow deletion.
• Properties: shows the properties of the video, such as the Name, Format, Resolution, Size, Forwarding, Date created,
and Location.
While viewing the video press Options and choose one of the following:
• Jump to track time: allows you to jump to a specific track time. Enter the time in HH:MM:SS format.
• Send via: allows you to send this video as a Message or to a Bluetooth enabled device.
• Properties: shows the details of the video, such as the Name, Format, Resolution, Size, Forwarding, Date created,
and Location.
Record Video
To record a video file using the built-in camcorder:
1. From Idle mode, press Menu and select Media Videos Record video.
2. Adjust the image by aiming the camera at the subject.
3. Press
4. Press the Right soft key to stop the recording and save the video file to your Videos folder.
5. Once the file saves, press to play back your video for review.
to begin recording the video. Press
to pause the recording.
Games and Apps
You can download MIDlets (Java applications that run on mobile phones) from various sources using the browser and
store them in your phone.
1. From Idle mode, press Menu Media Games and Apps and press the Select soft key or
.
66
When you access the Games and Apps menu, the list of default games displays. Once you download new games,
they are then added to the list.
More games
You can download more games from the WIND website by using the Browse games option.
From Idle mode, press Menu Media Games and Apps More games, press the Options soft key and
select Download.
Note: When downloading games, charges may apply. MIDlet game options differ depending on the MIDlet selected.
Other files
In this folder you can store other types of files, and view files in the following formats: Microsoft Word 2003 (.doc),
Microsoft Excel 2003 (.xls), Microsoft PowerPoint (.ppt), Adobe PDF (.pdf), and Plain text (.txt). Files can be stored in
the phone’s memory or on a memory card.
Note: You can not view files saved in Office 2007 formats (.docx, .xlsx, .pptx).
1. From Idle mode, press Menu and select Media Other files
.
Media
67
2. Select a file and press the Options soft key to choose from the following options:
• Send via: allows you to send another file to a Bluetooth enabled device.
• Delete: allows you to delete the Selected, Multiple, or All files.
• Move: allows you to move the Selected, or Multiple files to another location or folder.
• Copy: allows you to copy the Selected, or Multiple files to another location or folder.
• Rename: allows you to change the name of the selected file.
• Create folder: allows you to create a new folder in which to contain other files.
• Sort by: allows you to sort files by Date, Type, Name, or Size.
• Bluetooth visibility: allows you to enable Bluetooth so you can share the selected file or multiple files with other Bluetooth
devices.
• Lock/Unlock: allows you to lock the file to protect it from deletion or unlock it to allow deletion.
•
Properties: displays Basic details about the selected file.
Memory status
You can check the amount of memory used or remaining on the phone or memory card in the following categories.
On phone: Photos, Music, Images, Sounds, Videos, Other files, Games and Apps).
On memory card: Photos, Music, Images, Sounds, Videos, Files.
1. From Idle mode, press Menu and select Media Memory status
.
2. Press the Left or Right navigation keys to move between the memory status On phone and On memory card.
68
Section 10: Changing Your Settings
This section explains the sound and phone settings for your phone. It includes such settings as: display, security,
memory, and any extra settings associated with your phone.
Personalize
Using this menu you can personalize the Sound, Display, Phone, Messaging key, Language, Greeting message, and
Time and Date.
Sound profiles
Sound profiles are groups of customized sound settings to make your phone behave differently in various situations.
For example, you may want to silence the phone in a theatre or have your incoming call ringtone play loudly when
you are outdoors.
1. From Idle mode, press Menu and select Settings Personalize Sound profiles.
The following options display:
• Normal: for use in situations that do not require special sound settings.
• Silent: for situations where you do not want your phone to use audible sounds or vibrate.
• Vibration: the phone vibrates but does not play any sounds.
• Driving: for use while driving.
• Outdoor: for use outdoors or in loud environments where it may be difficult to hear alert tones.
2. Highlight a profile and press Save.
Note: You can turn the Vibration profile on at any time by pressing and holding
. The phone displays the message “Vibration
profile on”. Press and hold this key again to return to the previous mode.
Viewing and Changing Profile Settings
To view or change the settings for a profile, open the Sound Profile screen (see above), choose the profile you want
to change and select Options Edit.
Each profile is divided into three setting categories you can scroll to using the left and right navigation keys.
•
Incoming call: Lets you specify the way the phone alerts you to incoming calls. For example, you can choose to be alerted by a
melody or by vibration and melody. You can also specify ringtone and set audio volume.
Changing Your Settings
69
•
•
New messages: Lets you specify the manner in which the phone alerts you to incoming messages, the message alert tone and
the frequency of alert reminders.
Phone sounds: Lets you specify the sounds made by the phone when you press a key or turn the phone on or off.
To see all options for a specific setting, choose it and press Edit.
To change the setting, use the navigation keys to highlight another setting and press OK.
To save changes made to the profile settings, press Options and select Save.
Incoming call settings
•
Call alert type: Specifies how you want to be alerted to incoming calls (Melody, Increasing melody, Vibration then melody,
Vibration and melody, Vibration and increasing melody).
•
•
Ringtone: Lets you select a ringtone for incoming voice calls from the Media folders.
Ringtone volume: Lets you specify the volume for the selected ringtone (level 1 to 7).
New messages settings
•
Message alert type: Lets you specify how you want to be alerted to incoming messages (Melody, Vibration, Vibration and melody,
Mute).
•
•
Message alert tone: Lets you specify an alert tone for incoming messages.
Message alert repetition: Lets you specify whether the message alert tone notifies you of a new message Once, Every 1 minute
or Every 2 minutes until you open the message.
•
Alert tone volume: Lets you specify the volume for the selected alert tone (level 1 to 7).
Phone sounds settings
•
•
Keypad Tone: Lets you specify the tone played when you press a button on the keypad (Beep, Glossy or Off).
Power on type: Lets you specify whether the phone plays a response when you turn it on (Melody, Vibration, Vibration and
melody, Mute).
•
•
Power off type: Lets you specify whether the phone plays a response when you turn it off (Melody, Vibration, Vibration and
melody, Mute).
Volume: Lets you specify the volume for phone sounds from level 0 (Mute) to level 7.
Display settings
In this menu, you can change various settings for the display or backlight.
From Idle mode, press Menu and select Settings Personalize Display settings.
70
The following options display:
Wallpaper
This menu allows you to change the background image to display in Idle mode.
1. From Idle mode, press Menu and select Settings Personalize Display settings Wallpaper.
2. Choose a file from the Media folders on your phone or memory card: Photos (for pictures taken with the
camera in the phone) or Images (for Wallpapers supplied with the phone or Downloaded images), then press
Dialing display
This menu allows you to select the type, size, and color of your dialing font and the background color.
To change the type of the font:
1. From the Display settings menu, highlight Dialing display and press the Select soft key or
2. Select the Font type option and press the Select soft key or
3. Use the Left or Right Navigation key to select between: Normal 1 or Normal 2 and press Save
.
.
.
Changing Your Settings
71
To change the size of the font:
1. From the Display settings menu, highlight Dialing display and press the Select soft key or
.
2. Select the Font size option and press the Select soft key or
.
3. Use the Left or Right Navigation key to select between: Small, or Large or Medium and press Save
.
To change the color of the font:
1. From the Display settings menu, highlight Dialing display and press the Select soft key or
.
2. Highlight the Font color option and press the Select soft key or
.
3. Use the Left or Right Navigation key to select either Monochrome, Gradation, or Basic (black or white). If you
select Monochrome or Gradation, select a colour by pressing the Down Navigation key and then scrolling
through the available choices.
4. Press Save to save your change or Back to exit without saving changes.
To change the background color:
1. From the Display settings menu, highlight Dialing display and press the Select soft key or
.
2. Highlight the Background color option and press the Select soft key or
3. Use the Left or Right Navigation key to select between 21 different colors.
4. Press Save to save your change or Back to exit without saving changes.
.
Brightness
You can adjust the display brightness for best viewing in different lighting conditions.
1. Press the Left or Right Navigation keys to adjust the level (from 1-5).
2. Press Save to save your changes.
Backlight time
This menu allows you to select the length of time the screen backlight remains on at full brightness and the time it
remains on but dimmed while the phone is idle.
The On setting is how long the screen backlight is on at full brightness.
72
1. Highlight the On field and press
.
2. Highlight a selection (5 seconds
,
15 seconds, or 30 seconds) and press OK.
The Dim option is how long the screen backlight remains on in the dimmed state.
1. Highlight the Dim field and press
2. Highlight a selection (Off 5 seconds, 15 seconds, or 30 seconds) and press OK.
,
Keypad light
In this menu you can configure the keypad light to turn on whenever they keypad is used (“Use at any time”) or only
when it is used during a selected time window (“Use at custom time”).
To set a custom time:
1. Highlight the Set time field and press the right or left navigation key to display Use at custom time
.
2. Highlight the After time field and enter the time you want the keypad light to begin operating (for example,
5:00PM)
3. Highlight the Until time field and enter the time you want the keypad light to stop operating (for example, 9:00
AM).
4. Press Save to save your selections or Back to cancel.
Phone settings
You can use this menu to customize various phone settings.
From Idle mode, press Menu and select Settings Personalize Phone settings.
The following options are available.
Airplane mode
When you are in locations where you are not permitted to send or receive calls or access online information, Airplane mode lets
you use all other phone functions. When it is on, the Airplane Mode icon is displayed on the Idle screen.
Highlight On or Off and press Save.
Changing Your Settings
73
Auto key lock
Locks the phone keys whenever the screen goes off (when keypad has been idle for the length of time controlled by
the Backlight time settings On and Dim, see above).
1. From Idle mode, press Menu and select Settings Personalize Phone settings Auto key lock.
2. Press Off or On and press the Save soft key.
USB mode
This menu selects whether a default application is launched on your phone when an active USB connection is
detected or you are asked which application to launch.
Important!: Bluetooth communication must be disabled before a USB connection can be initiated.
1. From Idle mode, press Menu and select Settings Personalize Phone settings
USB mode.
2. Select one of the following USB modes:
• Samsung PC studio: sets PC Studio to launch as the default application when a USB connection is detected.
• Ask on connection: opens a selection window that requires you to choose the connection type (Samsung PC Studio or
Mass storage).
• Mass storage: The PC recognizes a microSD card in your phone as a storage drive, allowing you to transfer files to and from
the card. The card name appears in the list of disk drives in My Computer on the PC.
Security
Lock phone
When the phone lock is enabled, the phone password must be entered each time the phone is switched on. The phone
remains operational until switched off. To change the phone password, see.
From Idle mode, press Menu and select Settings Personalize Phone settings
Security
Lock phone.
The following options are available:
–
–
Disable: you are not asked to enter the phone password when you switch on the phone.
Enable: you are required to enter the phone password when you switch on the phone.
74
Change phone password
The Change password feature allows you to change your current phone password to a new one. You must enter the
current password before you can specify a new one.
Once you enter a new password, you are asked to confirm the change by entering the password again.
1. From Idle mode, press Menu and select Settings Personalize Phone settings
phone password
2. Enter your current password and press Confirm.
3. Enter the new password and press Confirm, then enter the new password again and press Confirm.
Security
Change
.
Note: If you change your password, be sure to record it and keep it in a safe place. If you forget your password, contact your Service
Provider for assistance.
Check PIN code
When the Check PIN code feature is enabled, you must enter your PIN each time you switch on the phone.
Consequently, any person who does not have your PIN cannot use your phone without your approval.
Note: Before enabling or disabling the PIN Check feature, you must enter your PIN.
The following options are available:
–
Disable: the phone connects directly to the network when you switch it on.
–
Enable: you must enter the PIN each time the phone is switched on.
Change PIN code
This feature allows you to change your current PIN, provided that the Check PIN code feature is enabled. You must
enter the current PIN before you can specify a new one.
Once you enter a new PIN, you are asked to confirm the PIN number by re-entering it.
Set FDN mode
FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict your outgoing calls to a limited
set of phone numbers stored on your SIM card.
Changing Your Settings
75
The following options are available:
–
Disable: you can call any number.
–
Enable: you can only call phone numbers stored in the FDN list. You must enter your PIN2. You can obtain your PIN2 from WIND’s
customer service.
Note: With FDN mode enabled, you can not dial any number other than those in the FDN list.
Change PIN2 code
The Change PIN2 feature allows you to change your current PIN2 to a new one. You must first enter the current PIN2
(obtained from WIND) before you can specify a new one. Once you enter a new PIN2, you are asked to re-enter the
new PIN2 to as confirmation.
Note: Not all SIM cards have a PIN2. This menu does not display if your SIM card does not have the PIN2 feature.
Messaging key
This menu allows you to customize the Messaging key by selecting whether it opens the Create message screen or
your Inbox. You can modify this setting any time.
1. From Idle mode, press Menu and select Settings Personalize Messaging key
2. If this is the first time you are programming this key, read the information that displays and press OK
3. Highlight Create message or Inbox and press Assign
.
.
.
Memory settings
Clear memory
From this menu you can clear the memory for Media, Messages, Contacts, Calendar, Tasks, Memo, or Games and
more. You can all select All to clear everything listed.
1. From Idle mode, press Menu and select Settings Personalize Memory settings
Clear memory.
2. Highlight each selection you want to make and press to place a check mark in the selection box.
A check mark displays next to each memory area to be cleared clear.
3. Press OK to clear the memory.
4. Enter your password in the Password field and press Confirm
.
76
5. At the Clear? prompt, press Yes to confirm your action or No to cancel.
Memory card settings
From this menu you can view details about the memory card, format the memory card, rename the memory card, or
turn Bluetooth visibility on or off.
1. From Idle mode, press Menu and select Settings Personalize Memory settings
settings
2. Select one of the following options and press
Memory card
.
.
•
•
•
•
Memory card details: displays information about the memory card such as Name, Maximum size and Available memory.
Format memory card: allows you to reformat the memory card.
Rename memory card: allows you to rename the memory card.
Bluetooth visibility On/Off: allows you to turn the Bluetooth visibility On or Off.
Memory status
You can check the amount of the memory used and memory remaining for Shared memory, Messages, Media,
Calendar, Tasks, Memo, and Contacts.
1. From Idle mode, press Menu and select Settings Personalize Memory settings
Memory status.
2. Highlight a category for which you want to view the memory status and press Select
.
The status for that category displays.
Language
This menu allows you to select a language for Screen text and Input language.
1. From Idle mode, press Menu and select Settings Personalize Language
2. Highlight the Screen text field and press
3. Select one of the following options and press OK
.
.
.
•
•
•
Automatic (read from your SIM card)
English
Français (French)
4. Highlight the Input language field and press
.
Changing Your Settings
77
5. Select one of the following options and press OK
.
•
•
English
Français (French)
6. Press Save to confirm your selections.
Greeting message
This menu allows you to set a greeting to display briefly when the phone is switched on.
1. From Idle mode, press Menu and select Settings Personalize Greeting message.
2. Press
to clear the text and enter the message you want to display in the greeting.
Press the Options soft key to access the following options:
• Save: allows you to save the current greeting message.
• Input language: allows you to change the text input language for entering the greeting message.
• Edit style: allows you to configure the Font color, Font size, or Font type for this greeting message.
•
Cancel: cancels the change to the greeting message.
Time and Date
This menu allows you to change the current time and date displayed.
1. From Idle mode, press Menu and select Settings Personalize Time and date.
2. The following options are available:
• Time zone update: allows you to receive time information from WIND’s network.
–
–
–
Automatic: the phone automatically updates the time and date according to the current time zone using the network service.
Manual only: you need to manually set the time and date (see below).
Prompt first: the phone asks for a confirmation before the update.
If Manual only or Prompt first is selected, the following options are enabled:
• Home zone: Lets you specify your location relative to Greenwich Mean Time. Press the left or right navigation button to move
the vertical bar on the map to your time zone. One or more well-known cities within the selected time zone are displayed
below the map. To enable or disable daylight saving, highlight Daylight saving and press
to add or remove the check
mark at the left side. Press OK to return to the previous screen.
78
• Time: allows you to change the hour and minute.
• Date: allows you to enter the month, day, and year.
• Time format: allows you to select whether your time displays in either a 12 hour or 24 hour format.
•
Date format: Lets you specify the date format you prefer. Press Edit, highlight a selection (DD/MM//YYYY, MM/DD/YYYY,
YYYY/MM/DD, YYYY/DD/MM).
3. Press Save.
Note: Automatic updates of time and date do not change the time set for alarm settings or calendar memos.
Bluetooth
About Bluetooth
Bluetooth is a short-range wireless communications technology capable of exchanging information over a distance of
about 30 feet without requiring a physical connection.
Unlike infrared, you don't need to line up the devices to beam information with Bluetooth. If the devices are within a
range of one another, you can exchange information between them, even if they are located in different rooms.
The following Bluetooth options are available:
Turn Bluetooth On/Off
This option toggles Bluetooth On or Off (if Bluetooth is switched off, the menu option is Turn Bluetooth on; if Bluetooth
is on, the menu option is Turn Bluetooth off).
From Idle mode, press Menu and select Settings Bluetooth Turn Bluetooth on/off
Note: Turn off Bluetooth when it is not required to save battery life and in situations where Bluetooth use is prohibited, such as on
airplanes.
My devices
This option allows you to search for new Bluetooth devices.
From Idle mode, press Menu and select Settings Bluetooth My devices.
The phone searches for available devices and displays list of devices found.
Changing Your Settings
79
My visibility
When Bluetooth Visibility is turned on, your phone is wirelessly transmitting its phone name and status. This can be
useful if you are attempting to connect additional Bluetooth devices but can pose a security risk and allow
unauthorized connection. This feature should be paired with a Bluetooth security option.
1. From Idle mode, press Menu and select Settings Bluetooth My visibility.
2. Highlight a selection (On/Off/Custom) and press the Select soft key or
.
My phone name
When your phone’s Bluetooth visibility is turned On, it identifies itself using the name entered into this text field. This
name can be altered by erasing the pre-existing text and entering a new text string in its place. This feature should be
paired with a Bluetooth security option.
1. From Idle mode, press Menu and select Settings Bluetooth My phone name.
2. Press
to erase the previous name.
3. Use the phone’s keypad or keyboard to enter a new name. The default input entry method is ABC (A Eng),
which enters individual letters, all in upper case. You can also select T9 English (T9 Eng) mode using the right
soft key.
4. Press the Save soft key or
to save the new name.
Security mode
When Bluetooth Visibility is turned on, your phone is wirelessly transmitting its phone name and status. This
transmission can pose a security risk and allow unauthorized connection to your phone. It is recommended that you
activate your phone’s Bluetooth security.
1. From Idle mode, press Menu and select Settings Bluetooth Security mode.
2. Highlight On or Off and press the Select soft key or
.
Remote SIM mode
Remote SIM mode lets a Bluetooth phone car kit access contact information stored on your SIM card.
1. From Idle mode, press Menu and select Settings Bluetooth Remote SIM mode.
2. Highlight On or Off and press the Select soft key or
.
80
Features
Actually, the Bluetooth specification is a protocol that describes how the short-range wireless technology works,
whereas individual profiles describe the services supported by individual devices. Profiles reduce the chance that
different devices integrate.
The following Service profiles are available:
–
–
–
–
–
–
Headset: the remote Bluetooth headset enables both incoming and outgoing calls.
Handsfree: the remote Bluetooth car kit enables both incoming and outgoing calls.
Bluetooth stereo headset: used to listen to music through a Bluetooth stereo headset.
File transfer: used to transfer files to and from Bluetooth devices.
Object push: used to exchange personal data (namecards, contacts, etc.) with Bluetooth devices.
Basic printing: used to print images, text messages, personal data such as namecards and appointments, etc. through a
Bluetooth-enabled printer.
–
–
Serial port: the remote Bluetooth device acts as a virtual serial port.
SIM access: provides access to the SIM card through Bluetooth.
Call settings
Answering mode
The Answering mode menu selects the available method for answering a call on your phone.
1. From Idle mode, press Menu and select Settings Call settings
2. Highlight a selection and press Save or . Options include:
Answering mode
.
• Send key: you can answer an incoming call by pressing either the Accept soft key or the
key.
• Any key: you can answer an incoming call by pressing any key on your phone except Reject or
.
Auto redial
In this menu, you can automatically redial the last number if the call was cut off or you were unable to connect.
1. From Idle mode, press Menu and select Settings Call settings Auto redial
2. Highlight a selection and press Save or . Options include:
.
• Off: the phone does not automatically redial the last number if the call is disconnected or cut off.
• On: the phone automatically redials the number.
Changing Your Settings
81
Show my number
In the Show my number menu you can select how your ID is handled when an outgoing call is initiated.
1. From Idle mode, press Menu and select Settings Call settings
2. Highlight your selection and press to make your selection.
3. Press Save to save your new selection. Options include:
Show my number.
• Set by network: uses the default network information to identify you to the other party.
• Show number: displays your identifying information to the other recipient.
• Hide number: hides your identifying information from the other recipient.
Call forwarding
This network service allows re-routing of incoming calls to a secondary number that you specify.
Example: You may wish to forward your business calls to a colleague while you are on holiday.
To activate call forwarding options:
1. From Idle mode, press Menu and select Settings Call settings
2. Highlight your selection and press Select or to make your selection. Options include:
Always: all calls are forwarded until this feature is cancelled.
If busy: calls are forwarded when you are already on another call.
Call forwarding.
•
•
• If no reply: calls are forwarded when you do not answer the phone. If you select this option, select (from the Waiting time
field) the length of time the network waits before forwarding a call.
• If out of reach: calls are forwarded when you are not in an area covered by WIND or when your phone is switched off.
•
Cancel all: Cancels call forwarding.
3. Enter the number that calls are to be forwarded to in the Forward to text box or press Options and select
Contacts to select a number from Contacts.
Tip: To enter an international code, press and hold the
key until the + sign displays.
4. Press
to save the changes or Options to access the following options:
82
• Contacts: Lets you select the number that calls are to be forwarded to from Contacts.
• Activate: Activates Call Forwarding.
•
Deactivate: Deactivates Call Forwarding.
• Check status: The current status displays. If call forwarding is set, the number to which calls are forwarded displays.
The phone sends your settings to the network and the network’s acknowledgement displays.
Call barring (SIM Card Dependent)
Call Barring allows you to restrict various types of calls from being made or received with your phone. This option is
SIM dependent and requires a subscription. For more information, contact your service provider.
Call waiting
This network service informs you when someone is trying to reach you during another call.
To set your call waiting options:
1. From Idle mode, press Menu and select Settings Call settings
Call waiting.
2. If Call waiting is not activated, press to activate. If Call waiting is activated, press
to deactivate. You
can also press Options to access the following options:
• Activate: Activates Call waiting.
•
Deactivate: Deactivates Call waiting.
• Check status: The current status displays (Activated or Deactivated).
Call status tones
Lets you activate alert tones that sound during a call.
1. From Idle mode, press Menu and select Settings Call settings
Call status tones
.
2. Highlight each status tone you want to enable or disable and press
beside your selection. The following options are available:
to insert or remove the check mark
•
•
•
Call connect tone: Sounds a tone when a call connection is successful.
Minute minder: Sounds a tone after each minute of a call.
Call end tone: Sounds a tone when a call connection is terminated.
3. Press Options and select Save to save your selection.
Changing Your Settings
83
Alerts on call
Lets you specify whether you want to be alerted by a tone when a message is received or the time for an alarm is
reached while you are on a call.
1. From Idle mode, press Menu and select Settings Call settings
2. Highlight Off or On and press Save
Alerts on call.
.
Auto reply
This feature sets up an automatic text reply for incoming calls. To enable Auto reply:
1. From Idle mode, press Menu and select Settings Call settings Auto reply
.
2. Highlight the Activation field and press the Right navigation key to turn the Activation On
3. Press the Down navigation key and enter a reply message in the Reply to send field.
4. Press Options and select Save to save your selection.
.
Call log management
Call time
This menu lets you view the time log for calls made and received.
Note: The actual time invoiced by WIND may differ from times displayed on your phone due to network features and service plan.
The following time logs are available:
• Last voice call time: shows the length of your last call.
• Total sent: shows the total length of all calls you have made since the timer was last reset.
• Total received: shows the total length of all calls you have received since the timer was last reset.
Delete history
This menu allows you to delete the records in each call record separately, or you can delete all of your call records at
one time.
1. From Idle mode, press Menu and select Settings Call settings Call log management
Delete history
.
2. Highlight each call log you want to delete and press
following options are available:
to insert a check mark beside your selection. The
84
•
•
•
•
All calls
Missed calls
Dialed calls
Answered calls
3. Press Delete
.
4. At the Delete? prompt, press Yes to delete the selected category, or No to cancel.
Advanced
Network
The Network selection feature enables you to automatically or manually select the network used when roaming
outside of your home area.
Note: You can select a network other than your home network only if there is a valid roaming agreement between the two.
To change your Network selection setting:
1. From Idle mode, press Menu and select Settings Advanced Network
Default setup.
2. Highlight one of the following options and press the Select soft key or
.
• Automatic: you are connected to the first available network when roaming.
• Manual: the phone displays a list of available networks when roaming. Highlight the network you want to connect to and
press the Select soft key or
.
The phone attempts to connect to the selected network. If a connection is available, you are connected.
To manually find and select a network:
1. From Idle mode, press Menu Settings Advanced Network
2. Highlight the network you want to connect to and press the Select soft key or
The phone attempts to connect to the selected network. If a connection is available, you are connected.
Reset settings
Search now.
.
Reset settings
From this menu you can reset your phone’s settings to default settings.
To reset your settings:
Changing Your Settings
85
1. From Idle mode, press Menu and select Settings Reset settings
Reset settings
.
2. Highlight each type of setting you want to reset and press
following options are available:
to insert a check mark beside the selection. The
• All: Phone, Display, and Sound settings are returned to default values.
• Phone settings: only phone settings are returned to default values.
•
Display settings: only display settings are returned to default values.
• Sound settings: only sound settings are returned to default values.
3. Press Reset, enter your password and press Confirm
.
4. At the Reset settings? prompt, press Yes to confirm or No to cancel.
Master reset
The Master reset option resets your phone’s settings to default values, similarly to the Reset Phone option described
above, but also deletes all user data.
Note: All user data such as contacts, messages, pictures, videos, and music will be deleted and can not be recovered.
1. From Idle mode, press Menu and select Settings Reset settings
2. Enter your password and press Confirm
3. At the Reset settings? prompt, press Yes to reset the settings or No to cancel.
Master reset.
.
86
Section 11: Applications
This section outlines the various applications that are available on your phone.
Applicationsallowyoutosetalarms,usevoicerecognition,createtasks,savememos,performsimplemathcalculations
and calculate tips, check time in different time zones, perform unit conversions, and use a timer or stopwatch.
Alarm
This feature allows you to:
•
•
Set up to 3 alarms to ring at specified times.
Set the phone to switch on automatically and ring the alarm even if the phone is switched off.
To set an alarm:
1. From Idle mode, press Menu and select Applications Alarms.
2. Choose an alarm (Alarm 1, Alarm 2 or Alarm 3) and press the Select soft key or
.
3. If you want to change the name of the alarm, highlight the Name field, and press
to backspace, then enter
a new name for this alarm (limited to 15 characters).
4. Press the Down navigation key and highlight the Alarm activation field.
5. Press the Right navigation key to select On. The remaining alarm settings are activated.
6. Press the Down navigation key to highlight Alarm time. Enter the time you want the alarm to sound.
7. Press the Down navigation key to highlight Alarm type and press
Melody: the alarm rings using the selected ring melody.
. Select one of the following alarm types:
•
• Increasing melody: the volume of the melody increases.
• Vibration: the phone vibrates but does not play a tone.
• Vibration then melody: the phone vibrates three times and then starts playing a melody.
• Vibration and melody: the phone vibrates and plays a melody simultaneously.
• Vibration and increasing melody: the phone vibrates and plays a melody with increasing volume.
Applications
87
8. Press the Down navigation key to highlight Alarm tone. Press
to display a list of tones from which to choose.
Press Select to select a tone from the list. To listen to a tone, highlight the file and press Play. To select the
tone, press Add.
9. Press the Down navigation key to highlight the Alarm volume field.
10. Press the Left or Right navigation key to decrease or increase the volume.
11. Press the Down navigation key to highlight the Alarm day panel. Press
to display a list of days.
12. Highlight each time you want the alarm to sound and press
The following options are available:
to insert a check mark beside the selection.
•
•
•
Every day: the alarms sounds every day at the same time.
Once only: the alarm only sounds once
Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday: the alarm sounds each week on the selected day
13. Press OK to confirm your selections.
14. If you want to enable the Snooze option, press the Down navigation key to highlight the Snooze field. Press the
Right navigation key to select a snooze time: Off
15. Press the Down navigation key to highlight the Repeat field. Press the Right navigation key to select the number
of repeats: 1 time 2 times 3 times 5 times, or 10 times
,
1 min, 3 min, 5 min, 7 min, or 10 min.
,
,
,
.
16. Press
17. Press
or press Options and select Save to confirm your settings.
to return to Idle mode.
To stop the alarm when it rings, press any key. If Snooze is enabled, you can press the Snooze soft key to delay the
alarm.
Auto power
Auto power allows the phone to power on if it is switched off when an alarm time occurs. To turn Auto power on:
1. From Idle mode, press Menu and select Applications Alarms Auto power.
2. Highlight On and press Save or
.
88
Voice Recognition
Nuance voice recognition software is an advanced speech recognition program that can be used to activate a wide
variety of functions on your phone. Nuance software automatically voice activates up to 2,000 contacts for voice
dialing and searching. No pre-recording or training is required. Speak a contact name to dial, and use your voice to
look up contacts, launch applications and navigate phone menus.
1. In Idle mode, press Menu and select Applications Voice recognition.
2. After the voice prompt “Say a Command”, speak a command. A list of available commands is provided below.
Note: This list of voice commands is briefly displayed.
Say a Command Options
•
Call <Name or #>
numbers exist (i.e., home, work, cell phone), say the name and the number type.
Send Text <Name or #> displays the Create message screen.
Lookup <Name> locates and displays contact information stored in the Contacts list.
opens the phone application (Web, Calendar, Ringtones, Tasks, Contacts, Voice mail, Games). Application must
:
dials the spoken number or the number associated with the spoken name in your contact list. If multiple
•
•
•
:
:
Go to <App>
:
be activated.
•
Check <Item>
Battery, My Phone Number).
While the Say a command screen displays you have two options:
:
Reports various phone status readings (Status, Messages, Missed Calls, Time, Signal Strength, Network,
•
•
Tutorial: provides examples of how to use the voice commands.
Settings: lists the settings and information for voice command software:
•
•
•
Confirmation: Sets whether the system asks for confirmation of what is said (Automatic, Always Confirm, Never Confirm).
Adaptation: Trains the software to respond to your voice.
Audio Modes: Sets the level of audio guidance to Prompt Mode (audio and screen prompt), Readout Mode (audio and
screen prompt, audio help), Expert Mode (screen prompt and beep only).
•
•
Speakerphone: Automatic (uses phone setting), Always On, Always Off.
About: Displays the software version.
If the phone does not recognize a command, it issues the voice prompt “Sorry, Command not recognized. Try Again?”
Say Yes to try again, No to access options screen that provides two choices:
Applications
89
•
•
Help: provides instructions on how to use voice commands.
Restart: Returns to the Say a Command screen.
Voice Recognition Tips
•
Speak clearly about 3-8 inches from the microphone when giving a command. There is no need to speak slowly or with added
emphasis. The voice recognition software has been optimized to understand speech in its natural form. If it does not recognize
your command after a few seconds, a voice prompt asks you to repeat the command. If it does not recognize your command
again, it issues the voice message “Sorry, command not recognized,” and voice recognition turns off.
•
You must end your current Voice Commands call before you can make another call using Voice Commands. To make a three-way
call, only the first call can be made using Voice Commands.
•
•
Wait for the tone before you speak.
In very noise environments, it may be helpful to use a headset or a Bluetooth headset.
Contacts List Voice Activation
On startup, Nuance reads your Contacts list and voice-activates all the names.
When you add or change contacts, Nuance automatically reloads and voice-activates the list.
Voice recognition examples
The following examples assume that the Mode setting is set to Prompt Mode or Readout Mode (so audio prompts are
provided).
Name Dialing
To use Name Dial, there must be contact information stored in Contacts.
1. In Idle mode, press Menu and select Applications Voice recognition.
2. After the voice prompt “Say a Command”, say “Call” followed by the first and last name of the contact that you
want to dial.
The name that you said is repeated through the earpiece and your phone dials the number, or if Nuance is not sure of
the name that you said, it asks “Did you say” followed by a name and listens for a response. If you say “Yes” the name
repeats and your phone dials the number. If you say “No”, Nuance asks again or says “Sorry, Command not
recognized, try again? Say Yes to try again, No to access the options screen (see above).
90
Send Text Message
To access Voice recognition:
1. In Idle mode, press Menu Applications Voice recognition.
2. After the voice prompt “Say a Command”, say “Send Text” at a distance of 3-8 inches from the microphone.
“Say the Name” plays through the earpiece.
3. Say the first and last name of the contact that you want to message.
The Text Message client launches, allowing you to compose your text message, or if Nuance is not sure of the name
that you said, it asks “Did you say” followed by a name and listens for a response. If you say “Yes” the text message
client launches. If you say “No”, Nuance asks again or says “Sorry, Command not recognized, try again? Say Yes to
try again, No to access the options screen (see above).
Name Lookup
To perform a name lookup, there must be entries in your Contacts list.
1. In Idle mode, press Menu Applications Voice recognition.
After the voice prompt “Say a Command”, say “Lookup” at a distance of 3-8 inches from the microphone. “Say
the name” plays through the earpiece.
2. Say the name exactly as it displays in Contacts, first name followed by last name.
3. The contact name displays on the screen with other information that you’ve entered for that contact.
Opening Applications
You can open an application or access a menu on your phone using Voice recognition.
1. In Idle mode, press Menu and select Applications Voice recognition.
2. After the voice prompt “Say a Command”, say “Go to” at a distance of 3-8 inches from the microphone. A list of
applications displays and Nuance asks “Which shortcut?”.
3. Say the name of one of the applications. The application opens.
Note: You can also say, “Go to” followed by the name of the application, e.g., “Go to Web”.
Applications
91
Checking Phone Status
Use the Check command to see and hear status information from your phone, including its phone number, status,
current signal strength, and battery level.
To check phone status:
1. In Idle mode, press Menu and select Applications Voice recognition.
2. After the voice prompt “Say a Command”, say “Check” at a distance of 3-8 inches from the microphone. A list of
options displays.
The spoken application menu option displays.
Voice Recognition Settings
Confirmation
When Nuance does not clearly recognize a name or number, it can display a confirmation list that prompts you to
select a choice. There are three options for using the confirmation list:
• Automatic: Nuance displays a confirmation list when it is not sure if it has correctly recognized the name or number and there
is more than one possible choice. This is the default setting.
• Always Confirm: Nuance always displays a confirmation list, even when there is only one choice.
• Never Confirm: Nuance never displays a confirmation list.
To change the setting:
1. In Idle mode, press Menu and select Applications Voice recognition.
2. From the “Say a command” screen, press Settings and select Confirmation
.
3. Highlight one of the options and press OK.
Adaptation
Voice adaptation can significantly improve the recognition accuracy of your specific voice. After adaptation, your phone
recognizes only your voice. Other users are not able to use the handset with Nuance unless the handset is reset to
factory defaults.
Adaptation requires reading multiple sequences of digits. The entire process takes approximately one minute.
1. In Idle mode, press Menu and select Applications Voice recognition.
2. After the voice prompt “Say a Command”, press Settings and select Adaptation. Adapt Voice
.
92
3. Press Start and follow the on-screen instructions to complete the adaptation process.
Tip: Perform the adaptation process in a quiet room.
Audio Modes
The Audio Modes setting selects the level of audio assistance provided when using Nuance. There are three possible
levels:
• Expert Mode: turns off all voice prompts. Provides screen prompt and an audible “beep” only.
• Prompt Mode: Provides a voice prompt and confirmation screen when the software is waiting for you to speak a command.
This is the default mode.
• Readout Mode: Provides a voice prompt and confirmation screen, similarly to Prompt mode, reads text on the screen, and
provides audio help information.
To change the audio mode:
1. In Idle mode, press Menu and select Applications Voice recognition.
From the “Say a command” screen, press Settings and select Audio Modes
.
2. Highlight one of the options and press OK.
Speakerphone
The Speakerphone feature controls how Nuance uses the speakerphone.
•
•
•
Always On: audio always plays through the speakerphone
Always off: audio always plays through the internal speaker
Automatic: Nuance uses the speakerphone setting of the phone.
To change the speakerphone setting:
1. In Idle mode, press Menu and select Applications Voice recognition.
From the “Say a command” screen, press Settings and select Speakerphone
.
2. Highlight one of the options and press OK.
About
The About option displays information about Nuance including version number, LVR number, build number, device
number and web address.
Applications
93
Tasks
The Task function lets you create a list of tasks to be completed or “to-do list”.
Entering New Tasks
1. From Idle mode, press Menu and select Applications Tasks.
2. Press Options and select Create
.
3. In the Title text box, give the task a name.
4. In the Details text box, describe the task. The entry can be up to 100 characters long.
5. Highlight Start date. Using the numeric keypad, enter the start date.
6. Highlight Due date. Using the numeric keypad, enter the due date.
7. To enable a warning alarm for a task, highlight Alarm and press
to enable the alarm. Highlight Alarm date
and use the numeric keypad to set the date you want the alarm to occur, then highlight Alarm time and set the
alarm time. Select Alarm tone and press
to open the Sounds menu. To play any of the available tunes,
highlight the name and press Play. Press Add to use the tune as the alarm sound or Back to return to the list.
8. Highlight Priority and use the left and right navigation keys to set a priority level (1, 2 or 3).
9. Press
or press Options and select Save.
To View Tasks
When you view the Tasks list, the current contents display with a status checkbox and a priority marker. If the item was
completed, a check displays in the checkbox. High priority items display a “1” triangle icon, Normal priority items
display a “2” triangle icon, and Low priority items a “3” triangle icon.
To view tasks:
1. From Idle mode, press Menu and selectApplications Tasks.
2. To view the details of a specific task, press
Editing a Task
or press Options and select View.
To edit a task:
1. From Idle mode, press Menu and selectApplications Tasks.
94
2. Highlight a task from the list, then press
3. Highlight a field to edit and press
.
.
4. Edit the items you wish to change and press
when your edits are complete.
Task Options
From the Tasks menu, you can access the following options by pressing Options:
•
•
•
•
•
•
•
•
•
•
View: Lets you view the details of the highlighted task.
Create: Lets you create new tasks.
Send via: Allows you to send the highlighted task as a Message or to a compatible Bluetooth device.
Done/Not Done: Lets you indicate whether a task is done or not (places or removes check mark beside the task in the task list).
List by: Lets you sort tasks by Done, Due date or Priority.
Delete: Lets you delete the Selected file, Multiple files, or All files.
Save in media: Saves the task details to the Other Files folder.
Print via Bluetooth: Lets you print the task details using a Bluetooth-enabled printer.
Missed alarm events: Lists the scheduled task entries that you have missed.
Memory Status: Shows the number of tasks in your phone and space left. The maximum number of tasks is 100.
Memo
Memo lets you create and save text files up to 100 characters that can be viewed later.
1. From Idle mode, press Menu Applications Memo and press the Select soft key or
.
2. Press Options
Create and press
to create a new memo.
A blank Memo screen displays.
3. Enter your text and press
to save.
From the Memo screen, you can access the following options by pressing Options:
•
•
•
•
•
View: Allows you to view the contents of a note.
Create: Allows you to create a new note.
Send via: Allows you to send the note to someone else as a message or via Bluetooth.
Delete: Allows you to delete the Selected note, Multiple notes or All notes.
Save in media: Saves the note file to the Other Files folder. The note creation date is added to the file name.
Applications
95
•
•
Print via Bluetooth: Lets you print the task details using a Bluetooth-enabled printer.
Memory Status: Shows the number of notes in your phone and space left. The maximum number of notes is 100.
Calculator
With this feature, you can use the phone as a calculator with basic arithmetic functions (addition, subtraction,
multiplication, division). To use the calculator:
1. From Idle mode, press Menu and select Applications Calculator.
2. Enter the equation you want to solve.
•
•
•
Enter numbers using the numeric keys and operators (+, -, × or ÷) using the navigation keys (as indicated on the display).
Enter decimal point and brackets using the left soft key (press once for decimal point, continue pressing for brackets).
To make corrections, press the * key to move the cursor to the left in the equation you have entered and the # key to move to
the right. Press
to delete the character immediately to the left of the cursor.
3. Press
to view the result.
Tip calculator
The tip calculator helps you calculate the tip on a meal or service and split the bill between the number of people
paying. To use the calculator:
1. Using the numeric keypad and decimal point key, enter the total amount of the bill in Bill.
2. If you want a percentage other than the default 15%, choose Tip (%) and enter the new value.
3. If more than one person is paying, choose # paying and enter the number.
4. The total amount of the tip is shown in Tip ($) and the amount each person pays in You pay.
World Clock
World clock lets you create and view a list that shows the current time in various other parts of the world.
Add time zones to the list
1. From Idle mode, press Menu and select Applications World clock.
2. Press Options and select Add
.
96
3. Use the left and right navigation keys to scroll to a time zone. The screen lists the current time in the time zone,
one or more well-known cities within the zone, and the GMT zone. The location of the zone is indicated on the
map by a black and white vertical line.
4. To toggle the application of Daylight Savings Time to the selected time zone, highlight Daylight saving and
press
to place or remove a check mark in the selection box.
5. Press OK to add this time zone to the World clock list.
Converter
The Converter performs unit conversions in the following categories:
–
–
–
–
–
–
Currency
Length
Weight
Volume
Area
Temperature
To convert a quantity:
1. From Idle mode, press Menu an select Applications Converter.
2. Scroll to the conversion type required and press the Select soft key or
3. Use the left and right navigation keys to select the original unit type.
4. Highlight the amount field and enter the amount to convert.
.
5. Highlight the second Unit field and use the right and left navigation keys to select the final unit type.
6. The converted value is displayed below the final unit type.
•
•
•
•
To reverse the direction of the conversion, press Options and select Reverse.
To change the amount to be converted, highlight the amount field and enter the new value using the numeric keypad.
To perform a different conversion, press Back to return to the Converter menu.
To change the preset currency conversion rates, press Options and select View rate. Use the left and right navigation keys to
select the base rate to be used. Use the up and down navigation keys to select the conversion rate to be changed. Press
,
change the value as required using the keypad, and press Save or
.
Applications
97
Timer
The Timer allows you to count down from a preset time to zero. A series of tones plays when the time reaches zero.
1. From Idle mode, press Menu and select Applications Timer and press the Select soft key or
.
2. Using the numeric keys, enter the number of hours, minutes and seconds that you wish to count down
(HH:MM:SS), then press
.
3. Press
to start the timer.
To pause the countdown, press
.
When the count reaches 0, an alarm sounds and the timer icon on the screen flashes. Press OK to cancel the alarm.
Stopwatch
The Stopwatch allows you to time an event and measure sub-intervals such as lap times. To use the stopwatch:
1. From the Idle screen, press Menu and select Applications Stopwatch.
2. Press
to start the stopwatch. You can measure sub-intervals by pressing
.
3. Press Stop to stop the count.
4. Press Reset to erase the recorded times.
98
Section 12: Browser
This selection opens the Browser menu, where you can view Internet sites, view sites saved as Bookmarks, create
Bookmarks, view your browser history, clear your cache or manage cookies.
Browser
Your phone is equipped with a browser that allows Web access using your phone.
From Idle mode, press Menu and select Browser.
Note: You can also access the browser directly from the idle screen by pressing the Browser soft key.
The following options are available:
Home
Selecting this menu connects the phone to the network and loads the homepage provided by your service provider.
In Idle mode, press Menu
Browser
Home and press the Select soft key or
.
To scroll through the screen, use the Up and Down keys.
To access the startup homepage from any other screen in the browser, press Options and select Go to
Homepage.
Exiting the browser
1. To exit the browser at any time, press
.
2. At the Exit Browser? prompt, press Yes to exit or No to remain in the browser.
Navigating the browser
•
To scroll through and select browser items, press the up or down navigation key until the item is highlighted, then press
confirm.
to
•
•
•
•
To select a numbered item, press the corresponding numeric key.
To return to the previous page, press Back or
To return to the startup homepage, press Options and select Go to Homepage
To exit the browser, press
.
Browser
99
Entering Text in the browser
When you are prompted to enter text, the currently active text input mode is indicated on the screen. For information
Browser Options
While the browser is open, the following options are available by pressing the Options soft key:
–
–
–
–
–
–
–
–
–
Reload: reloads the current page.
Resize page: allows you to manually resize the page by sliding the size bar to the left or right.
Go to: navigates to URL address, Homepage, Bookmarks, History, or Saved page.
Save: allows you to save the Image or Page.
Add to bookmarks: adds the current URL to Bookmarks.
Send URL via message: sends the currently viewed URL to a recipient as a message.
Page details: allows you to view details about the current page (Title, Address, Size, MIMEtype, and Last updated).
Exit browser: exits the browser page you are viewing and returns to the Home page.
Enter URL
This menu allows you to manually enter the URL address of a web site that you wish to access.
1. In Idle mode, press Menu and select Browser
Enter URL.
2. Highlight the URL field and enter the URL of the site you want to view.
To also save a bookmark for this site:
1. Highlight Add bookmark and press
to place a check mark in the selection box.
2. Highlight Title and enter a title for the bookmark.
3. Press
to access the web site.
Bookmarks
Bookmarks let you directly access your favorite Internet sites. This menu stores up to 100 URL addresses.
To store a bookmark:
100
1. In Idle mode, press Menu and select Browser Bookmarks.
2. Press Options and select Add bookmark.
3. Enter a name for the bookmark in the Title field.
4. Highlight the URL field and enter the address.
5. Press
to save the bookmark.
To access a bookmark:
1. In Idle mode, press Menu and select Browser Bookmarks.
2. Highlight a bookmark and press Go
. The browser displays the site.
While viewing the Bookmarks list, the following options are available by pressing the Options soft key:
•
•
•
•
Edit bookmark: allows you to edit the title or URL.
Delete: allows you to delete the Selected or Multiple addresses.
Add bookmark: allows you to enter a new bookmark URL.
Send URL via message: allows you to send the selected bookmark in a text message.
Saved Pages
This option displays a list of the pages that were saved while navigating the browser.
1. In Idle mode, press Menu and select Browser Saved pages.
2. To view a page, highlight an entry and press
.
History
This option provides a list of recently visited web sites. You can use these entries to return to previously visited web
pages.
1. In Idle mode, press Menu and select Browser History.
2. To view a page, highlight an entry and press
.
Browser
101
Browser Settings
Various settings are available when you are using the browser to navigate the web.
1. In Idle mode, press Menu and select Browser
2. Select one of the following options:
Clear cache
Browser settings.
Deletes the information stored in the phone’s memory cache (temporary memory where recently accessed web pages
are stored to speed up browser operation).
1. In Idle mode, press Menu and select Browser
Browser settings
Clear cache.
2. Press the Yes soft key to confirm the deletion or No soft key to cancel.
Cookies
Cookies are pieces of information stored on your phone by various web sites that identify who you are when you visit
the site and can be used to track your web surfing habits.
Cookie mode
Cookie mode allows you to define how your browser handles cookies.
1. In Idle mode, press Menu and select Browser
2. Highlight a setting and press Save or . The following options are available:
Accept all: the phone accepts all cookies that are received
Browser settings
Cookies
Cookie mode.
•
•
•
Reject all: the phone rejects all cookies that are received
Prompt: you are given the option to accept or reject each cookie when it is received.
Delete cookies
Cookies are pieces of information stored on your phone by various web sites that identify who you are when you visit
the site and can be used to track your web surfing habits. You can delete all cookies for security purposes.
1. In Idle mode, press Menu and select Browser
Browser settings
Cookies
Delete cookies.
2. At the Delete cookies? prompt press Yes to confirm deletion or No to cancel
.
102
Preferences
Preferences let you configure how your browser handles multimedia content and web scripts, and how web pages
are displayed.
In Idle mode, press Menu and select Browser
Browser settings
Preferences.
The following options are available:
•
•
•
•
Run javascript: To enable or disable, highlight this selection and press
remove a check mark.
to place a check mark in the selection box or
to place a check mark in the selection box or
Display images: To enable or disable, highlight this selection and press
remove a check mark.
Play sound: To enable or disable, highlight this selection and press
remove a check mark.
to place a check mark in the selection box or
View mode: To change the view mode, highlight this selection and use the right or left navigation key to select Desktop view or
Smart-fit view.
About Browser
About Browser displays information about the browser such as the type and version.
In Idle mode, press Menu and select Browser
Browser settings
About browser.
Browser
103
Section 13: Photos
In this menu you can view the photos you’ve stored on your phone or memory card.
1. From Idle mode, press Menu and select Photos.
If there is a microSD memory card in the phone, you can use the left and right navigation keys to switch between
phone and memory card access.
Note: When a memory card is inserted into the phone, a series of folders is automatically created on the card (Photos, Music, Images,
Sounds, Videos).
2. Use the Up or Down navigation key to highlight a particular image and press
3. Press to exit and return to the Idle screen.
to view the photo.
Note: The Photos menu is also available as a sub-menu in the Media menu (press Menu and select Media Photos).
Photos Options
The following options are available when you press the Options soft key with a graphic file highlighted:
• Send to: allows you to send the selected photo to one or more recipients.
• Send via: allows you to send the selected photo as a Message or to a Bluetooth enabled device.
• Set as: allows you to set the photo as Wallpaper or as a Picture ID.
• Delete: allows you to delete the Selected, Multiple, or All images.
• Move: allows you to move the Selected photo or Multiple photos to another location.
• Copy: allows you to copy the Selected photo or Multiple photos to another location.
• Rename: allows you to rename the photo.
• Take photo: allows you to take another photo.
• Create folder: allows you to create a new folder in which to place this photo.
• Sort by: allows you to sort photos in this folder by Date, Type, Name, or Size.
• Bluetooth visibility: lets you enable Bluetooth visibility for Selected or Multiple files (images stored on phone only).
• Print via Bluetooth: allows you to send the selected photo to a Bluetooth enabled printer.
104
• Lock/Unlock: allows you to lock the image to protect it from deletion, or unlock it to allow deletion (images stored on phone
only).
• Properties: allows you to view details about the selected image (Name, Format, Resolution, Size, Forwarding, Date
Created, Location).
While viewing a photo, press the Options soft key to choose from the following options:
•
•
•
•
•
•
Send via: allows you to send the photo as a Message or to another Bluetooth compatible device.
Set as: allows you to set the photo as Wallpaper or as a Picture ID.
Delete: allows you to delete the selected photo.
Rename: allows you to rename the photo.
Edit image: allows you to edit a new photograph for an outgoing message.
Bluetooth visibility: allows you to select one or multiple sounds to share with other Bluetooth devices (images stored on phone
only).
•
Slide show: displays all photos in the folder in a sequence. Press Pause to stop at a particular photo, Resume to continue.,
Back to cancel.
•
•
•
Print via Bluetooth: sends the selected photo to a Bluetooth enabled device.
Lock/Unlock: allows you to lock the photo to protect it from deletion or unlocks it to allow deletion (images stored on phone only).
Properties: displays the image Name, Format, Resolution, Size, Forwarding, Date created, and Location.
Wallpaper
To change the screen background image (“Wallpaper”):
1. From Idle mode, press Menu and select Media Photos.
2. Highlight a photo from the list and press the Options soft key.
3. Select Set as
Wallpaper.
4. Press the Set soft key to confirm your selection.
Your wallpaper selection updates.
Deleting Photos
You can delete photos one by one or all at one time.
1. From the Photos menu, highlight the photo you want to delete.
2. Press Options
Delete then press the Right navigation key.
Photos
105
3. Select Selected
,
Multiple, or All and press the Select soft key or
.
4. Press the Yes soft key to confirm the deletion.
5. Press
when you are finished.
Camera
This section explains how to use your phone’s built-in camera to take photographs. Additionally, you can send these
photos to other people in a Picture message or set a wallpaper or picture ID image.
Your camera produces photos in JPEG format.
Note: Do not take photos of people without their permission.
Do not take photos in places where cameras are not allowed.
Do not take photos in places where you may interfere with another person’s privacy.
Taking Photos
1. In Idle mode, press Menu and select Photos
(indicated by the icon on the top left corner of the screen), depending the mode last used. To change the camera mode,
press the key or press Menu and select Camera
Camera. The camera opens in either Camera or Camcorder mode
.
Note: You can also access the camera from the Idle screen by pressing the Camera key
on the right side of the phone.
2. Adjust the image by aiming the camera at the subject and framing the photo you want to take on the screen.
•
•
•
Press Menu to configure settings or apply effects. For more information, see “Configuring Camera Options” below.
You can change the brightness using the up and down navigation keys.
You can zoom in and out using the left and right navigation keys.
Tip: You can use the keypad to quickly change the camera options (see Camera shortcuts below).
3. Press the Camera key or to take the photo.
Camera Options in Capture Mode
Before taking a photo, press Menu to access the following camera options:
106
•
•
Camera/Camcorder: allows you to take a picture or record a video.
Shooting Mode: takes a photo in various modes. Once you change the mode, the corresponding indicator displays at the top of
the display.
–
–
–
Single: takes a single photo and allows you view it before returning to the shooting mode.
Continuous: takes a series of up to nine photos when you hold down the camera button.
Panorama: automatically creates a panoramic picture consisting of up to six frames. Frame the first image within the white box
outline on the screen and press the camera button to take the photo. Move the camera horizontally to the left or right until the frame
turns orange, at which time the camera automatically takes the next photo in the sequence. When the camera has taken the
required number of frames (up to six), press the camera key or
to process and view the panoramic image.
–
–
Smile shot: the camera closes the shutter when the subject of the photo smiles.
Mosaic: Allows you to take two or more photos arranged in a mosaic. Press List or use the left and right navigation buttons to view
the available patterns. Press OK to select a mosaic. Frame each segment and press the camera button to take the picture.
Frame: lets you add a decorative frame to the picture. Press List or use the left and right navigation buttons to view the available
frames. Press OK to select a frame.
–
•
•
•
Night Mode: Increases the camera sensitivity to brighten pictures taken in dark locations.
Size: allows you to set the image size to 1600x1200, 1280x960, 640x480, or 320x240.
White balance: allows you to set the white balance (color temperature of the surrounding light). Choose Auto (camera
automatically selects the setting), Daylight, Incandescent, Fluorescent, or Cloudy.
•
Exposure meter: sets the metering method the camera uses to determine proper exposure for the picture.
–
Matrix: divides the screen into segments and averages the exposure required for each segment
Centre-weighted: makes an exposure measurement over the entire screen but bases the result mostly on the center of the
screen.
–
–
Spot: takes an exposure measurement only in a small area at the center of the screen.
•
Effects: allows you to change the color tone or apply special effects to the photo.
–
–
–
–
–
None: cancels all effects
Black and white removes all color and displays the picture in black and white (greyscale) mode.
Sepia: displays the picture in black and white with a sepia tint that makes it look like an old picture.
Negative: reverses the light and dark areas of the picture and the colours (red appears green, etc.).
Watercolor. displays the picture in black and white with a blue tint that makes it look like you are under water.
•
Timer: allows you to set a time delay before the camera takes the photo. Select the length of delay you want (Off, 2 seconds, 5
seconds, or 10 seconds). When you press the Camera key
or
key, the camera takes the photo after the specified
time has elapsed.
Photos
107
•
•
Viewfinder mode: configures how the camera displays the image and indicators on the screen.
– Full Screen View and Indicator: fills the screen with the image and displays icons that indicate camera settings
– Full Screen View: fills the screen with the image
– Full Screen View and Guidelines: adds lines to the screen that aid photo composition.
Settings
:
–
Photo: allows you to select the photo quality.
–
Setup: allows you to configure the following parameters.
–
Review screen: selects whether pictures are displayed for review after they are taken (On) or you are returned to the viewfinder to take
another picture (Off).
–
–
–
Shutter sound: selects the shutter sound that indicates a picture has been taken (Shutter 1, Shutter 2, Shutter 3 or None).
Default storage: sets the default storage location for saved pictures (Phone or Memory card).
Shortcuts: displays a list of available keypad shortcuts for camera settings.
Camera Shortcuts
You can change camera settings using the keypad. The following shortcuts are available:
Navigation keys
Landscape mode (phone held horizontally): Left and Right keys operate the zoom, Up and Down keys adjust
image brightness
Portrait mode (phone held vertically): Up and Down keys operate the zoom, Left and Right keys adjust image
brightness
Volume keys zoom in and out
toggles between camera and video mode.
changes the shooting mode.
sets the timer.
changes the Viewfinder mode.
108
Camera options after photo is taken
After taking a picture, press Options to access the following options:
•
•
•
•
•
•
Take another: allows you to take another picture.
Send via: allows you to send the photo as a Message or to another Bluetooth compatible device.
Print via Bluetooth: sends the image to a Bluetooth enabled device.
Delete: allows you to delete this photo.
Set as: allows you to set the photo as Wallpaper or as a Picture ID.
Edit: allows you to edit image attributes
•
•
•
•
•
•
•
•
Save as: lets you save the file while editing.
Effects: apply Filter, Style, Warp, or Partial Blur (highlight a selection and press Select).
Adjust: lets you change the Brightness, Contrast, or Color.
Transform: lets you Resize, Rotate, or Flip the image.
Crop: lets you crop a portion of the photo.
Insert: Lets you add Frames, Clip Art, Emoticons, or Text.
Set as: allows you to set this image as Wallpaper or Picture ID (attaches the photo to a contact).
Send via: sends the photo in a Message or via Bluetooth
• Print via Bluetooth: sends this image to a Bluetooth enabled printer.
•
•
Rotate: rotates the image 90 degrees clockwise each time the OK button is pressed.
Slide show: displays all photos in the folder in a sequence. Press Pause to stop at a particular photo, Resume to continue.,
Back to cancel.
•
Properties: displays the image Name, Format, Resolution, Size, Forwarding, Date created, and Location.
Camcorder
This section explains how to use your phone’s built-in camera to take videos.
1. In Idle mode, press Menu and select Photos
(indicated by the icon on the top left corner of the screen), depending the mode last used. To change the camera mode,
press the key or press Menu and select Camcorder
Camera. The camera opens in either Camera or Camcorder mode
.
Note: You can also access the camera at any time by pressing the Camera key
on the right side of the phone.
Photos
109
2. Aim the camera lens at the subject and frame the starting point for the video on the screen.
•
•
•
Press Menu to configure settings or apply effects. For more information, see “Camcorder Options” below.
You can change the brightness using the up and down navigation keys.
You can zoom in and out using the left and right navigation keys.
Tip: You can use the keypad to quickly change the camera settings (see Camcorder shortcuts below).
3. Press
to begin recording the video. Press
to pause recording and again to restart.
4. Press Stop to stop the recording and save the video file to your Videos folder.
5. Once the file saves, you can press
to play back your video for review.
Camcorder Options in Capture Mode
Before taking a video, press Menu to access the following camcorder options:
•
•
•
•
Camera/Camcorder: allows you to take a picture or record a video.
Mode: allows you to select Normal or Limit for MMS
.
Size: shows the video resolution (176x144). The resolution displays on the capture screen.
White balance: allows you to set the white balance (color temperature of the surrounding light). Choose Auto (camera
automatically selects the setting), Daylight, Incandescent, Fluorescent, or Cloudy.
•
Exposure meter: sets the metering method the camera uses to determine proper exposure for the picture.
–
Matrix: divides the screen into segments and averages the exposure required for each segment
Center-weighted: makes an exposure measurement over the entire screen but bases the result mostly on the center of the
screen.
–
–
Spot: takes an exposure measurement only in a small area at the center of the screen.
•
Effects: allows you to change the color tone or apply special effects to the video.
–
–
–
–
–
None: cancels all effects
Black and white: removes all color and displays the video in black and white (greyscale) mode.
Sepia: displays the video in black and white with a sepia tint that makes it look like an old picture.
Negative: reverses the light and dark areas of the video and the colours (red appears green, etc.).
Watercolor. displays the video in black and white with a blue tint that makes it look like you are under water.
110
•
•
Timer: allows you to set a time delay before the video starts to record. Select the length of delay you want (Off, 2 seconds, 5
seconds, 10 seconds) and press the OK soft key. When you press
, the video begins recording after the specified time has
elapsed.
Viewfinder mode: configures how the camera displays the image and indicators on the screen.
– Full Screen View and Indicator: fills the screen with the image and displays icons that indicate camcorder
settings
– Full Screen View: fills the screen with the image
– Full Screen View and Guidelines: adds lines to the screen that aid video composition.
•
Settings:
–
Video:
–
–
Quality: allows you to select the video quality (Economy, Normal, or Fine).
Audio recording: selects whether sound is recorded with the video (On or Off).
–
Setup: allows you to configure the following parameters.
–
Review screen: selects whether videos are displayed for review after they are taken (On) or you are returned to the viewfinder to take
another video (Off).
–
–
Default storage: sets the default storage location for saved videos (Phone or Memory card).
Shortcuts. displays a list of available keypad shortcuts for camcorder settings.
Tip: You can use the keypad to quickly change the camcorder options using the camera shortcut keys (see “Camcorder Shortcuts”
Camcorder Shortcuts
Shortcut keys allow you to change options using your keypad, Navigation keys, and Volume keys in capture mode.
The following options are available.
Navigation keys
Landscape mode (phone held horizontally): Left and Right keys operate the zoom, Up and Down keys adjust
image brightness
Portrait mode (phone held vertically): Up and Down keys operate the zoom, Left and Right keys adjust image
brightness
)
Photos
111
Volume keys zoom in and out
switches the handset between camcorder and camera mode.
changes the recording mode.
allows you to set a time delay before the camera takes the video.
changes the Viewfinder mode.
112
Section 14: Calendar
With the Calendar, you can:
•
•
•
•
Consult the calendar by month, week, or day.
Note Appointments, Anniversaries, Holidays, Important events, or Private events.
Set an alarm to act as a reminder.
Check your memory status.
To navigate to the Calendar:
From Idle mode, press Menu and select Calendar.
The calendar opens in Month, Week or Day view, depending on the View by setting (see Calendar Options below).
In Month view, the current date is highlighted by a box around the number. Use the navigation keys to move to other
dates. Appointments are indicated by a blue arrow at the lower right corner of the date, Anniversaries by a green
arrow at the lower left corner, Holidays by changing the number to red, Important events by a red arrow at the upper
left corner and Private events by a yellow arrow at the upper right corner.
Week view provides a grid with the days of the week across and daytime hours arranged vertically. Use the
navigation keys to move to specific days and times. The same arrow indicators as in Month view appear on the
number indicating the day and colored rectangles indicate the time slots where events are scheduled. To view the
events on a specific day, use the left and right navigation keys to move to the day, press Options and select View by
Day to open Day view.
Note: You can also move to the previous or next week by pressing the Volume keys on the left side of the phone.
Day view provides a list of the events associated with the chosen day, the scheduled time for each and icons
indicating the type of event, alarm indicator, etc.
To Change the View
While in any of the Calendar views, to change the view press Options, select View by, highlight the view you want
and press Select or
.
Calendar Options
While using the Calendar, press Options to access the Calendar options (not all options are available in each view):
View: Opens the Day view for the selected day.
•
Calendar
113
•
•
•
•
•
•
•
•
•
View by: lets you change the view to one of the other options.
Create: used to create a new event (Appointment, Anniversary, Holiday, Important or Private).
Send via: Lets you send the information for the selected event to someone else via message or Bluetooth.
Go to: lets you directly select the current day or a specific date.
Event list: displays a list of specific type of event (Appointment, Anniversary, Holiday, Important or Private).
Delete: lets you delete events for the Selected day, events in specific Period, events in This month, all data Before date, or All.
Save in media: Saves the information in a .vcs format file in the Other Files folder.
Print via Bluetooth: Prints a day calendar to a Bluetooth-enabled printer.
Settings: allows you to select the calendar Starting Day (whether Sunday or Monday is the first day of the week) and View by
(whether the current Month, Week or Day is displayed when the calendar is opened).
Missed alarm events: provides a list of events with alarm time that has passed.
•
•
Memory status: shows the number of each type of event saved on your phone. The phone holds a maximum of 100
Appointments, 50 Anniversaries, 50 Holidays, 20 Important events and 20 Private events.
Creating Calendar Entries
To write or edit a calendar entry on a specific date:
1. Use the navigation keys to select the date.
2. Press Options and select Create.
3. Select the type of entry you want to make (Appointment, Anniversary, Holiday, Important or Private).
Depending on the type of entry, some of the following options are available:
•
•
Title: Enter text describing the event.
Details: Enter any additional details.
Note: The Start Date and End Date on event entry screens are automatically set to the date highlighted on the calendar when the screen
is opened.
•
•
•
•
Start date: If the displayed start date is not correct, use the navigation keys and numeric keypad to enter the required date.
Start time: Use the numeric keypad to set the start time. Use the Right navigation key to toggle the AM/PM setting.
End date: If the displayed end date is not correct, use the navigation keys and numeric keypad to enter the required date.
End time: Use the numeric keypad to set the end time. Use the right navigation key to toggle the AM/PM setting.
114
•
Date: If the displayed date for the event is not correct, use the navigation keys and numeric keypad to enter the required
date.
•
•
Location: Enter text detailing the location of the appointment.
Alarm (before): Allows you to set an alarm to remind you of this event and set the length of time before the event that the
alarm should sound (number of minutes, hours or days).
•
•
Alarm time: Allows you to set the time of day that the alarm will sound.
Alarm tone: lets you choose an alarm tone from the Sounds menu. To play any of the available tones, highlight the name
and press
. Press Add to select the tone, Back to return to the list.
•
•
Repeat: allows you to repeat the same event on a daily, weekly or monthly basis.
Every: Lets you specify a multiplier for the Repeat setting, for example if Repeat is set to Weekly and you enter 3 in this
box, the event repeats every 3 weeks.
•
•
•
Except weekends: Lets you exclude weekends.
Until: Lets you specify a date to stop the event.
Repeat every year: Lets you repeat an Anniversary or Holiday event every year on the same date.
4. When you have finished, press
by a colored arrow at a corner of the date.
Event Options
The following options display when you press Options while setting an event.
or press Options and select Save. The entry is indicated on the calendar
•
•
•
Birthday from Contacts: lets you import information from Contacts (anniversary only).
Save: saves the event in the corresponding event list.
Input language: lets you switch the input language between English and Français (French).
Viewing a Calendar Entry
To view the details for a day, highlight the day in the calendar view and press
. To view the details of an entry,
highlight it and press
or press Options and select View.
Missed Alarm Events
While viewing the calendar or a calendar entry, the Missed alarm event option shows all calendar entries that you
have missed. If more than one entry is stored, press the up or down navigation key to scroll to the previous or next
entry. Press Options to access the following options:
•
View: Allows you to view the highlighted entry details.
Calendar
115
•
•
Delete: Allows you to delete the currently selected missed alarm event.
Delete All: Allows you to delete all missed alarm events.
116
Section 15: Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Yourwirelessphoneisaradiotransmitterandreceiver.Itisdesignedandmanufacturednottoexceedtheemissionlimits
for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S.
Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on the safety standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific studies.
The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and
health.
Theexposure standard for wireless phonesemploys aunit of measurementknown asSpecificAbsorptionRate(SAR).
The SAR limit recommended by the FCC is 1.6W/kg.
SAR tests are conducted using standard operating positions specified by the FCC with the phone transmitting at its
highestcertifiedpowerlevelinalltestedfrequencybands.AlthoughtheSARisdeterminedatthehighestcertifiedpower
level,theactualSARlevelofthephonewhileoperatingcanbewellbelowthemaximumvalue.Thisisbecausethephone
is designed to operate at multiple power levels so as to use only the power required to reach the network. In general,
the closer you are to a wireless base station antenna, the lower the power output of the phone.
The Media menu is used to manage your media files (audio, pictures, videos, games and apps, and other files).
Note: In the U.S. and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of
tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any
variations in measurements.
Before a new model phone is available for sale to the public, it must be tested and certified by the FCC that it does not
exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. While there may
be differences between the SAR levels of various phones and at various positions, they all meet the government
requirement.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in
compliancewiththeFCCRFexposureguidelines. SARinformationonthismodelphoneisonfilewiththeFCCandcan
be found under the Display Grant section of http:// www.fcc.gov/oet/fccid after searching on FCC ID printed in the label
on the phone.
Health and Safety Information
117
For Body Operation
Forbodywornoperation, this modelphonehasbeentestedandmeetstheFCCRFexposureguidelines whenusedwith
a Samsung-supplied or approved accessory designated for this product or when used with an accessory that contains
no metal and that positions the phone a minimum from the body.
TheminimumdistancefromthebodyforthismodelphoneiswrittenintheFCCcertificationinformation.Non-compliance
with the above conditions may violate FCC RF exposure guidelines.
For more Information concerning exposure to radio frequency signals, see the following websites:
•
•
•
•
Federal Communications Commission (FCC)
http://www.fcc.gov
Cellular Telecommunications Industry Association (CTIA):
http://www.ctia.org
U.S.Food and Drug Administration (FDA)
http://www.fda.gov/cdrh/consumer
World Health Organization (WHO)
http://www.who.int/peh-emf/en
–
–
–
–
Precautions When Using Batteries
•
•
•
Never use any charger or battery that is damaged in any way.
Use the battery only for its intended purpose.
If you use the phone near the network’s base station, it uses less power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the network operator.
•
Battery charging time depends on the remaining battery charge, the type of battery and the charger used. The battery can be
charged and discharged hundreds of times, but it will gradually wear out. When the operation time (talk time and standby time) is
noticeably shorter than normal, it is time to buy a new battery.
•
•
If left unused, a fully charged battery will discharge itself over time.
Use only Samsung-approved batteries and recharge your battery only with Samsung-approved chargers. When a charger is not in
use, disconnect it from the power source.
•
•
Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life.
Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first.
118
•
•
Do not leave the battery in hot or cold places, such as in a car in summer or winter conditions, as you will reduce the capacity and
lifetime of the battery. Always try to keep the battery at room temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0C (32F).
Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and terminals of the battery (metal strips on the battery), for example when you carry a spare battery
in a pocket or bag. Short circuiting the terminals may damage the battery or the object causing the short-circuiting.
•
•
Dispose of used batteries in accordance with local regulations. Always recycle. Do not dispose of batteries in a fire.
The battery charging circuit may stop functioning if you are viewing a streaming video and receive a call while charging as the
capacity of the charging circuit will be exceeded.
Operating Environment
Remembertofollowanyspecialregulationsinforceinanyareaandalwaysswitchyourphoneoffwheneveritisforbidden
to use it, or when it may cause interference or danger.
When connecting the phone or any accessory to another device, read its user’s guide for detailed safety instructions.
Do not connect incompatible products.
Aswithothermobileradiotransmittingequipment, usersareadvisedthatforthesatisfactoryoperationoftheequipment
and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over your shoulder).
Electronic Devices
Mostmodernelectronicequipmentisshieldedfromradiofrequency(RF)signals.However,certainelectronicequipment
maynotbeshieldedagainsttheRF signalsfromyourwirelessphone. Consultthemanufacturertodiscussalternatives.
Pacemakers
Pacemakermanufacturersrecommendthat aminimumdistanceof15cm(6inches)bemaintainedbetweenawireless
phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent
with the independent research and recommendations of Wireless Technology Research.
Persons with pacemakers:
•
•
•
should always keep the phone more than 15 cm (6 inches) from their pacemaker when the phone is switched on.
should not carry the phone in a breast pocket.
should use the ear opposite the pacemaker to minimize potential interference.
If you have any reason to suspect that interference is taking place, switch your phone off immediately.
Health and Safety Information
119
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may wish to
consult your hearing aid manufacturer to discuss alternatives.
Audio Shock
At very high volumes, prolonged listening to a headset can damage your hearing.
Other Medical Devices
If you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Switch your
phone off in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health
care facilities may be using equipment that could be sensitive to external RF energy.
Vehicles
RFsignalsmayaffectimproperlyinstalledorinadequatelyshieldedelectronicsystemsinmotorvehicles. Checkwiththe
manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment
that has been added to your vehicle. You should also consult the manufacturer of any equipment that has been added
to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.
Users are advised to switch the phone off while at a refueling point (service station). Users are reminded of the need to
observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants
or where blasting operations are in progress.
Areaswithapotentiallyexplosiveatmosphereareoftenbutnotalwaysclearlymarked.Theyincludetheareasbelowdeck
on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane),
areaswhere the air contains chemicals or particles, such as grain, dustormetalpowders, and any other areawhere you
would normally be advised to turn off your vehicle engine.
120
Emergency Calls
This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee connection in all conditions. Therefore, you should never rely solely
on any wireless phone for essential communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/
or phone features are in use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the key.
If certain features are in use (call barring, for example), you may first need to deactivate those features before you can
make an emergency call. Consult this document and your local cellular service provider.
Whenmakinganemergencycall,remembertogiveallthenecessaryinformationasaccuratelyaspossible.Remember
that your phone may be the only means of communication at the scene of an accident; do not cut off the call until given
permission to do so.
Other Important Safety Information
•
Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the device.
•
•
Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or
accessories.
•
For vehicles equipped with an air bag, remember air bag inflates with great force. Do not place installed or portable wireless
equipment in the area over the air bag or in the air bag deployment area. If wireless equipment is improperly installed, and the air
bag inflates, serious injury could result.
•
•
Switch your phone off before boarding an aircraft. The use of wireless phones in aircraft is illegal unless permitted and may be
dangerous to the aircraft’s operation.
Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, legal action, or
both.
Health and Safety Information
121
Care and Maintenance
Yourphoneisaproductofsuperiordesignandcraftsmanshipandshouldbetreatedwithcare. Thesuggestionshelpyou
fulfill any warranty obligations and allow enjoy this product for many years:
•
•
•
•
•
Keep the phone and all its parts and accessories out of reach of small children.
Keep the phone dry. Precipitation and humidity contain minerals that may corrode electronic circuits.
Do not use the phone with a wet hand. Doing so may cause an electric shock to you or damage to the phone.
Do not use or store the phone in dusty or dirty areas. Moving parts may become damaged or clogged.
Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or
melt certain plastics.
•
Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the
phone, which may damage the phone’s electronic circuit boards.
•
•
Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened
in a mild soap-and-water solution.
•
•
Do not paint the phone. Paint can clog the device’s moving parts and prevent proper operation.
Do not put the phone in or on heating devices, such as a microwave oven, a stove or a radiator. The phone may explode when
overheated.
•
•
Use only the supplied or an approved replacement antenna. Unauthorized antennas or modified accessories may damage the
phone and violate regulations governing radio devices.
If the phone, battery, charger or any accessory is not working properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for service.
FCC Notice
Cautions
Modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.
FCC Compliance Information
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received.
122
Including interference that may cause undesired operation.
Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
theFCCRules. Theselimitsaredesigned toprovidereasonableprotectionagainstharmfulinterferenceinaresidential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
televisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrect
the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.
Appendix A: Certification Information (SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Yourwirelessphoneisaradiotransmitterandreceiver.Itisdesignedandmanufacturednottoexceedtheemissionlimits
for exposuretoradio frequency (RF)energy set by the Federal Communications Commission oftheU.S. Government.
TheselimitsarepartofcomprehensiveguidelinesandestablishpermittedlevelsofRFenergyforthegeneralpopulation.
The guidelines are based on safety standards that were developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to
assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption
Rate (SAR). The SAR limit set by the FCC is 1.6 W/kg. SAR Tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating
can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so
astouseonlythepowerrequiredtoreachthenetwork. Ingeneral, thecloseryouaretoawirelessbasestationantenna,
the lower the power output.
Health and Safety Information
123
Note: In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kilogram (W/kg) averaged over one
gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for
any variations in measurements.
Before a new model phone is available for sale to the public, it must be tested and certified by the FCC that it does not
exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in
positions and locations(e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR
values of this model phone as reported to FCC are:
GSM850
Head: 0.412 W/Kg Body worn: 1.07 W/Kg
GSM1900
Head: 0.307 W/Kg Body worn: 0.812 W/Kg
WCDMA
Head: 0.547 W/Kg Body worn: 0.804 W/Kg
Body-wornoperationsarerestrictedtoSamsung-supplied,approvedornon-Samsungdesignatedaccessoriesthathave
no metal and must provide at least 1.5cm separation between the device, including its antenna whether extended or
retracted, and the user’s body. Non-compliance to the above restrictions may violate FCC RF exposure guidelines.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can
be found under the Display Grant section of http://www.fcc.gov/oet/fccid.
Appendix B: Safe and Responsible Wireless Phone Use
Cellular Telecommunications & Internet Association
“Safety is the most important call you will ever make.”
A Guide to Safe and Responsible Wireless Phone Use
Tens of millions of people in North America today take advantage of the unique combination of convenience, safety and
value delivered by the wireless telephone. Quite simply, the wireless phone gives people the powerful ability to
communicate by voice-almost anywhere, anytime with the boss, with a client, with the kids, with emergency personnel
or even with the police. Each year, North Americans make billions of calls from their wireless phones, and the numbers
are rapidly growing.
124
But an important responsibility accompanies those benefits, one that every wireless phone user must uphold. When
driving a car, driving is your first responsibility. A wireless phone can be an invaluable tool, but good judgment must be
exercised at all times while driving a motor vehicle whether on the phone or not.
The basic lessons are ones we all learned as teenagers. Driving requires alertness, caution and courtesy. It requires
a heavy dose of basic common sense-keep your head up, keep your eyes on the road, check your mirrors frequently
andwatchoutforotherdrivers.Itrequiresobeyingalltrafficsignsandsignalsandstayingwithinthespeedlimit.Itmeans
using seat belts and requiring other passengers to do the same.
Butwithwirelessphoneuse,drivingsafelymeansalittlemore.Thisbrochureisacalltowirelessphoneuserseverywhere
to make safety their first priority when behind the wheel of a car. Wireless telecommunications is keeping us in touch,
simplifying our lives, protecting us in emergencies and providing opportunities to help others in need. When it comes
to the use of wireless phones, safety is your most important call.
Wireless Phone “Safety Tips”
Below are safety tips to follow while driving and using a wireless phone which should be easy to remember:
1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction
manual and learn to take advantage of valuable features most phones offer, including automatic redial and
memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your
attention off the road.
2. When available, use a hands free device. A number of hands free wireless phone accessories are readily
available today. Whether you choose an installed mounted device for your wireless phone or a speaker phone
accessory, take advantage of these devices if available to you.
3. Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach
and where you can grab it without removing your eyes from the road. If you get an incoming call at an
inconvenient time, if possible, let your voice mail answer it for you.
4. Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with
know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain,
sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay
attention to the road.
5. Do not take notes or look up phone numbers while driving. If you are reading an Contact list or business card,
or writing a to do list while driving a car, you are not watching where you are going. It’s common sense. Don’t
get caught in a dangerous situation because you are reading or writing and not paying attention to the road or
nearby vehicles.
Health and Safety Information
125
6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic.
Try to plan your calls before you begin your trip or attempt to coincide your calls with times you may be stopped
at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip-dial only
a few numbers, check the road and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional
conversations and driving do not mix-they are distracting and even dangerous when you are behind the wheel of
a car. Make people you are talking with aware you are driving and if necessary, suspend conversations which
have the potential to divert your attention from the road.
8. Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect
yourself and your family in dangerous situations-with your phone at your side, help is only three numbers away.
Dial 9-1-1 or other local emergency number in the case of fire, traffic accident, road hazard or medical
emergency. Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity
to be a Good Samaritan in your community. If you see an auto accident, crime in progress or other serious
emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to
do for you.
10. Call roadside assistance or a special wireless non emergency assistance number when necessary. Certain
situations you encounter while driving may require attention, but are not urgent enough to merit a call for
emergency services. But you still can use your wireless phone to lend a hand. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a
vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.
Careless,distractedindividualsandpeopledrivingirresponsiblyrepresentahazardtoeveryoneontheroad.Since1984,
theCellularTelecommunicationsIndustryAssociationandthewirelessindustryhaveconductedaneducationaloutreach
programtoinformwirelessphoneusersoftheirresponsibilities assafedriversandgoodcitizens. Asweapproachanew
century, more and more of us will take advantage of the benefits of wireless telephones. And, as we take to the roads,
we all have a responsibility to drive safely.
The wireless industry reminds you to use your phone safely when driving.
Cellular Telecommunications & Internet Association For more information, please call 1-888-901-SAFE.
For updates: http://www.ctia.org
126
Appendix C: Consumer Update on Wireless Phones
U.S. Food and Drug Administration
1. What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called cell, mobile, or
PCSphones.Thesetypesofwirelessphonescanexposetheusertomeasurableradiofrequencyenergy(RF)because
of the short distance between the phone and the user s head. These RF exposures are limited by Federal
Communications Commission safety guidelines that were developed with the advice of FDA and other federal health
and safety agencies. When the phone is located at greater distances from the user, the exposure to RF is drastically
lower because a person’s RF exposure decreases rapidly with increasing distance from the source. The so-called
“cordless phones,” which have a base unit connected to the telephone wiring in a house, typically operate at far lower
power levels, and thus produce RF exposures well within the FCC’s compliance limits.
2. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are associated with using wireless phones.
Thereisnoproof,however,thatwirelessphonesareabsolutelysafe.Wirelessphonesemitlowlevelsofradiofrequency
energy (RF) in themicrowaverange while being used. They also emitvery low levels of RF whenin the stand-by mode.
WhereashighlevelsofRFcanproducehealtheffects(byheatingtissue),exposuretolowlevelRFthatdoesnotproduce
heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any
biologicaleffects.Somestudieshavesuggestedthatsomebiologicaleffectsmayoccur,butsuchfindingshavenotbeen
confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies,
or in determining the reasons for inconsistent results.
3. What is FDA’s role concerning the safety of wireless phones?
Underthelaw, FDA does notreview thesafety of radiationemittingconsumer products such aswireless phones before
they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if
wireless phones are shown to emit radio frequency energy (RF) at a level that is hazardous to the user. In such a case,
FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or
recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry
to take a number of steps, including the following:
•
•
Support needed research into possible biological effects of RF of the type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and
Health and Safety Information
127
•
Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use
on human health
FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:
•
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All
phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on
FDA and other health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at
higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are
typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the primary
subject of the safety questions discussed in this document.
4. What is FDA doing to find out more about the possible health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure
that high priority animal studies are conducted to address important questions about the effects of exposure to radio
frequency energy (RF).
FDAhasbeenaleadingparticipantintheWorldHealthOrganizationInternationalElectromagneticFields(EMF)Project
since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research
needsthathasdriventheestablishmentofnewresearchprogramsaroundtheworld.TheProjecthasalsohelpeddevelop
a series of public information documents on EMF issues.
FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and
Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight,
obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted
through contracts to independent investigators. The initial research will include both laboratory studies and studies of
wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of
the latest research developments around the world.
5. What steps can I take to reduce my exposure to radio frequency energy from my wireless phone?
128
If there is a risk from these products—and at this point we do not know that there is—it is probably very small. But if you
are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radio
frequencyenergy(RF). Sincetimeisakeyfactorinhowmuchexposureapersonreceives, reducingtheamountoftime
spent using a wireless phone will reduce RF exposure.
Ifyoumustconductextendedconversationsbywireless phoneeveryday, youcouldplacemoredistancebetweenyour
body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could
useaheadsetandcarrythewirelessphoneawayfromyourbodyoruseawirelessphoneconnectedtoaremoteantenna
Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those described above to reduce your RF exposure from
wireless phone use.
6. What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you
want to take steps to lower exposure to radio frequency energy (RF), the measures described above would apply to
children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance
between the user and the RF source will reduce RF exposure.
Somegroupssponsoredbyothernationalgovernmentshaveadvisedthatchildrenbediscouragedfromusingwireless
phones at all. For example, the government in the United Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it
was not based on scientific evidence that any health hazard exists.
7. Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that
hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These
systems reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions,
willnotbeplacedagainstthehead. Ontheotherhand, ifthephoneismountedagainstthewaistorotherpartofthebody
during use, then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required
to meet safety requirements regardless of whether they are used against the head or against the body. Either
configuration should result in compliance with the safety limit.
8. Do wireless phone accessories that claim to shield the head from RF radiation work?
Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that
accessoriesthatclaimtoshieldtheheadfromthoseemissionsreducerisks.Someproductsthatclaimtoshieldtheuser
Health and Safety Information
129
from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to
the phone. Studies have shown that these products generally do not work as advertised. Unlike “hand-free” kits, these
so-called “shields” may interfere with proper operation of the phone. The phone may be forced to boost its power to
compensate, leading to an increase in RF absorption. In February 2002, the Federal trade Commission (FTC) charged
two companies that sold devices that claimed to protect wireless phone users from radiation with making false and
unsubstantiated claims. According to FTC, these defendants lacked a reasonable basis to substantiate their claim.
9. What about wireless phone interference with medical equipment?
Radio frequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA
helpeddevelopadetailedtestmethodtomeasureelectromagneticinterference(EMI)ofimplantedcardiacpacemakers
and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for
theAdvancementofMedicalinstrumentation(AAMI).Thefinaldraft,ajointeffortbyFDA,medicaldevicemanufacturers,
and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac
pacemakers and defibrillators are safe from wireless phone EMI.
FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and
performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a
compatible phone and a compatible hearing aid at the same time. This standard was approved by the IEEE in 2000.
FDAcontinuestomonitortheuseofwirelessphonesforpossibleinteractionswithothermedicaldevices.Shouldharmful
interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem.
10. What are the results of the research done already?
Theresearchdonethusfarhasproducedconflictingresults, andmanystudieshavesufferedfromflawsintheirresearch
methods. Animal experiments investigating the effects of radio frequency energy (RF) exposures characteristic of
wirelessphoneshaveyieldedconflictingresultsthatoftencannotberepeatedinotherlaboratories.Afewanimalstudies,
however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals.
However, many of the studies that showed increased tumor development used animals that had been genetically
engineered or treated with cancer causing chemicals so as to be pre-disposed to develop cancer in the absence of RF
exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the
conditions under which people use wireless phones, so we don’ t know with certainty what the results of such studies
mean for human health.
Three large epidemiology studies have been published since December 2000. Between them, the studies investigated
anypossibleassociationbetweentheuseofwirelessphones andprimarybraincancer, gioma, meningioma, oracoustic
130
neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the
existence of any harmful health effects from wireless phone RF exposures. However, none of the studies can answer
questions about long-term exposures, since the average period of phone use in these studies was around three years.
11. What research is needed to decide whether RF exposure from wireless phones poses a health risk?
Acombinationoflaboratorystudiesandepidemiologicalstudiesofpeopleactuallyusingwirelessphoneswouldprovide
some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very
large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists.
Epidemiological studies can provide data that is directly applicable to human populations, but 10 or more years follow-
up may beneeded to provide answers about somehealtheffects, such as cancer. This is becausetheinterval between
the time of exposure to a cancer-causing agent and the time tumors develop - if they do - may be many, many years.
The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-
to-day use of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or
which model of phone is used.
12. Which other federal agencies have responsibilities related to potential RF health effects?
Additional information on the safety of RF exposures from various sources can be obtained from the following
organizations.
•
•
•
•
•
•
•
FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
Occupational Safety and Health Administration’s (OSHA):
http://www.osha-slc.gov/SLTC/radiofrequencyradiation/index.html
National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/topics.emf
World health Organization (WHO):
http://www.who.int/peh-emf/en
International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
National Radiation Protection Board (UK):
http://www.hpa.org.uk/radiation
–
–
–
–
–
–
–
Health and Safety Information
131
•
US Food and Drug Administration
http://www.fda.gov/cellphones
–
132
Section 16: Warranty Information
Standard Limited Warranty
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the original purchaser
("Purchaser") that SAMSUNG's Phones and accessories ("Products") are free from defects in material and
workmanship under normal use and service for the period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of any part of Product, including antenna, or cosmetic damage;
(b) equipment that has the serial number removed or made illegible; (c) any plastic surfaces or other externally
exposed parts that are scratched or damaged due to normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral equipment not furnished or approved by SAMSUNG;
(e) defects or damage from improper testing, operation, maintenance, installation, or adjustment; (f) installation,
maintenance, and service of Product, or (g) Product used or purchased outside the United States or Canada.
This Limited Warranty covers batteries only if battery capacity falls below 80% of rated capacity or the battery leaks,
and this Limited Warranty does not cover any battery if (i) the battery has been charged by a battery charger not
specified or approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery are broken or show
evidence of tampering, or (iii) the battery has been used in equipment other than the SAMSUNG phone for which it is
specified.
What are SAMSUNG's Obligations? During the applicable warranty period, SAMSUNG will repair or replace, at
SAMSUNG's sole option, without charge to Purchaser, any defective component part of Product. To obtain service
Warranty Information
133
under this Limited Warranty, Purchaser must return Product to an authorized phone service facility in an adequate
container for shipping, accompanied by Purchaser's sales receipt or comparable substitute proof of sale showing the
date of purchase, the serial number of Product and the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-987-4357. Upon receipt, SAMSUNG will promptly repair or
replace the defective Product. SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts or
components when repairing any Product or replace Product with a rebuilt, reconditioned or new Product. Repaired/
replaced leather cases, pouches and holsters will be warranted for a period of ninety (90) days. All other repaired/
replaced Product will be warranted for a period equal to the remainder of the original Limited Warranty on the original
Product or for 90 days, whichever is longer. All replaced parts, components, boards and equipment shall become the
property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this Limited Warranty, Purchaser must pay all parts,
shipping, and labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY? EXCEPT AS SET FORTH IN THE EXPRESS
WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO:
•
•
•
•
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE;
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT
PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED WARRANTIES
AND CONDITIONS THAT MAY ARISE BY OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED
TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN. SOME STATES/
PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES
OF ANY KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
134
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF USE OF THE PRODUCT OR
FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL
OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED BY
SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR ANY CLAIM
BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO PROVINCE.
THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF
THIS PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED
WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY
OR UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR THE REMAINDER OF THIS
LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE
LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE NO CONDITIONS, EXPRESS
OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG
OR OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH
THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY
SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT
VENDOR, OWNER OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY
BE.
This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG, and SAMSUNG's Product
pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty. The agents,
employees, distributors, and dealers of SAMSUNG are not authorized to make modifications to this Limited Warranty,
or make additional warranties binding on SAMSUNG. Accordingly, additional statements such as dealer advertising
or presentation, whether oral or written, do not constitute warranties by SAMSUNG and should not be relied upon.
Warranty Information
135
Samsung Electronics Canada, Inc.
©2009 Samsung Electronics Canada, Inc. SAMSUNG is a registered trademark of Samsung Electronics Co., Ltd. and
its related entities.
No reproduction in whole or in part allowed without prior written approval.
Specifications and availability subject to change without notice.
136
Index
A
C
ABC mode 34
Call Functions 23
Adjusting the Call Volume 24
Answering a Call 25
Call history 25
Ending a Call 23
Making a Call 23
B
Backlight
description 17
settings 72
Redialing Last Number 24
Vibration profile 28
Battery
charging 6
installing 4
low indicator 7
removing 3
Call Records
All calls 26
Delete all 27
Missed calls 26
Bluetooth
About 79
Call Waiting 30
Caller Group
Adding 42
Editing 42
Camera 106
taking photos 106
Camera Shortcuts
Charging battery 6
features 81
Searching for new devices 79
Turning Bluetooth On and Off 79
Bookmarks 100
Browser 99
Clear cache 102
Enter URL 100
Entering Text 100
Exiting 99
D
History 101
Home 99
Dialing display 71
Navigating 99
Saved pages 101
settings 102
Background color 72
Font color 72
Font size 72
Font type 71
137
Display 14
backlight 17
Private Conversation 31
Setting up 31
icons 16
Mute 28
E
N
O
Changing the Text Entry Mode 34
Using ABC Mode 35
Using Numeric Mode 38
Using Symbol Mode 38
Using T9 Mode 37
F
Numeric mode 34
Options
During a Call 28
Making a New call while in a call 29
Functions and Options 21
Organizer
G
Calculator 96
Converter 97
Stopwatch 98
Timer 98
Getting Started 3
Activating Your Phone 3
Voice mail 8
H
Health and Safety Information 117
I
P
Icons, description 16
International Call 23
M
Making a Call
Phonebook 24
Media 59
Menu Navigation 19
Messages 46
Messaging
Types of Messages 46
Missed Call
Phone
icons 16
Phonebook
Photos
Accessing pictures 104
Deleting pictures 104
S
Settings 69
Viewing 26
Bluetooth 79
138
Display 70
Using Contacts List 39
Phone 73
Sound 69
V
Voice Commands
checking phone status 92
name dial 90
Shortcuts 20
SIM card
installing 3
name lookup 91
open applications 91
send text message 91
Soft Keys 21
Speakerphone 29
Speed Dial
Setting Up Entries 43
Standard Limited Warranty
Voice Mail 9
Voice Recognition
Say a Command options 89
W
Warranty Information 133
Stopwatch 98
Storing a Number
Switching on/off
phone 8
Symbol mode 34
T
Tasks 94
Text input mode
changing 34
Timer 98
Travel adapter 6
U
Features of Your Phone 10
Understanding Your Phonebook
Finding a Contact Entry 39
139
|