Samsung SGH S501I User Manual

SGH-S501i  
User’s Guide  
Be aware of special regulations  
Accessories and batteries  
Meet any special regulations in force in any area  
and always switch off your phone whenever it is  
forbidden to use it, or when it may cause  
interference or danger.  
Use only Samsung-approved batteries and  
accessories, such as headsets and PC data cables.  
Use of any unauthorised accessories could damage  
you or your phone and may be dangerous.  
• The phone could explode if the battery is  
replaced with an incorrect type.  
• Dispose of used batteries according to the  
manufacturer’s instructions.  
Water resistance  
Your phone is not water-resistant. Keep it dry.  
Sensible use  
Use only in the normal position (held to the ear).  
Avoid unnecessary contact with the antenna when  
the phone is switched on.  
At very high volumes, prolonged listening  
to a headset can damage your hearing.  
Emergency calls  
Qualified service  
Key in the emergency number for your present  
location, then press  
.
Only qualified service personnel may repair your  
phone.  
Keep your phone away from small children  
For more detailed safety information, see "Health  
and safety information" on page 115.  
Keep the phone and all its parts, including  
accessories, out of the reach of small children.  
1
• Camera and camcorder  
About this Guide  
Use the camera module on your  
phone to take a photo or record a  
video.  
This User’s Guide provides you with condensed  
information about how to use your phone. To  
quickly learn the basics for your phone, please refer  
to “Get started” and “Step outside the phone.”  
Special  
features of your phone  
In this guide, the following instruction icons  
appear:  
• Image editor  
Indicates that you need to pay careful attention  
to the subsequent information regarding safety  
or phone features.  
Crop, resize, rotate, and decorate  
your photos.  
Indicates that you can get more information on  
the referenced page.  
• Media player  
Play media files using your phone  
as a media player.  
Indicates that you need to press the Navigation  
keys to scroll to the specified option and then  
select it.  
• File viewer  
Indicates a key on the phone.  
[
]
Open documents in various  
formats on the phone without  
corruption.  
For example, [  
Indicates a soft key, whose function is displayed  
on the phone screen. For example, <Select  
]
< >  
>
2
• Bluetooth  
• Name card  
Transfer media files and personal  
data and connect to other  
devices using free, wireless  
Bluetooth technology.  
Create name cards with your  
number and profile.  
• Multimedia Message Service  
(MMS)  
• Photo printing  
Send and receive MMS messages  
with a combination of text,  
image, video, and audio.  
Print your photos to preserve  
your best moments forever.  
• E-mail (i-mail)  
• i-mode browser  
Send and receive e-mails with  
image, video, and audio  
attachments.  
Access the wireless web to get  
up-to-the-minute information  
and a wide variety of media  
content.  
• Java  
Enjoy Java  
games and download new games.  
-based embedded  
• Get personal with photo/  
video caller ID  
See who’s calling you when their  
very own photo or video  
displays.  
• Voice recorder  
Record memos or sounds.  
3
Browse the web............................................... 20  
Use Phonebook................................................ 20  
Send messages................................................ 22  
View messages................................................ 24  
Use Bluetooth.................................................. 24  
Use a memory card.......................................... 26  
Watch the phone display on a TV ....................... 28  
Contents  
Unpack  
6
6
7
Make sure you have each item  
Your phone  
Keys, features, and locations  
Get started  
Enter text  
30  
Stroke, T9 English, ABC, Number, and Symbol modes  
First steps to operating your phone  
Call functions  
36  
Install and charge the phone .............................. 7  
Power on or off ................................................. 9  
Keys and display............................................... 9  
Access menu functions...................................... 13  
Customise your phone ...................................... 14  
Make/Answer calls............................................ 17  
Advanced calling features  
Menu functions  
39  
112  
115  
All menu options listed  
Solve problems  
Step outside the phone  
17  
Help and personal needs  
Health and safety information  
Begin with your camera, the media player, the web, and  
other special features  
Use the camera................................................ 17  
Play media ...................................................... 18  
4
Overview of menu functions  
To access Menu mode, press [Centre] in Idle mode.  
1
Call log  
3
Applications  
5
i-mode  
7
8
9
Calendar  
Camera  
Settings  
p. 39  
p. 46  
p. 63  
p. 85  
p. 89  
p. 97  
1
2
3
4
5
6
7
Recent contacts  
Missed calls  
Dialled calls  
Received calls  
Delete all  
p. 39  
p. 40  
p. 40  
p. 40  
p. 40  
p. 40  
p. 41  
1
2
3
4
5
6
7
8
9
Media player  
Voice recorder  
Image editor  
Java world  
Alarm  
Calculator  
Timer  
Stopwatch  
World clock  
p. 46  
p. 50  
p. 51  
p. 53  
p. 53  
p. 54  
p. 54  
p. 55  
p. 55  
p. 56  
p. 56  
1
2
3
4
5
6
7
8
i-menu  
p. 63  
p. 65  
p. 73  
p. 74  
p. 74  
p. 75  
p. 75  
i-mail  
Java  
SMS  
Bookmarks  
Go to internet  
Saved Pages  
Call time  
Call costs1  
1
2
3
4
5
6
7
8
9
Time and date  
Phone settings  
Display settings  
Sound settings  
Light settings  
p. 97  
p. 97  
p. 99  
p. 100  
p. 101  
Browser Settings p. 76  
2
Phonebook  
p. 41  
6
My files  
p. 77  
10 Converter  
1
2
3
4
5
6
7
8
Contact list  
Create contact  
Group  
p. 41  
p. 42  
p. 43  
p. 44  
p. 44  
p. 45  
p. 45  
p. 46  
11 SIM AT1  
1
2
3
5
5
6
7
8
9
Images  
p. 77  
p. 79  
p. 80  
p. 80  
p. 81  
p. 82  
p. 82  
p. 84  
p. 85  
Network services p. 102  
Videos  
4
Messages  
p. 56  
Bluetooth  
p. 105  
p. 108  
p. 110  
p. 112  
Speed dial  
Music  
Security  
My name card  
Own number  
Management  
Service number1  
1
2
3
4
5
6
Create message  
My messages  
Templates  
p. 57  
p. 58  
p. 60  
p. 61  
p. 61  
p. 63  
Sounds  
i-mode settings  
Frame  
10 Reset settings  
My vMessages  
Other files  
Memory card2  
Memory status  
Delete all  
Settings  
1. Shows only if supported by  
your SIM card.  
2. Shows only if a memory card  
is inserted.  
Memory status  
5
Unpack  
Make sure you have each item  
Your phone  
Keys, features, and locations  
Phone  
Travel Adapter  
Battery  
Camera lens  
Earpiece  
Camera key  
External display  
User‘s Guide  
Main display  
You can obtain various accessories  
from your local Samsung dealer.  
Memory card  
slot  
Media player  
control keys  
• The items supplied with your phone  
and the accessories at your  
Samsung dealer may vary,  
depending on your country or  
service provider.  
• Use the purchased accessories with  
only Samsung-authorised devices.  
The use of these accessories with  
other devices could cause problems  
and any repair costs would not be  
covered by the warranty.  
Menu access/  
Confirm key  
(Centre)  
Headset/  
Adapter jack  
Left soft key  
Volume keys  
Dial key  
Navigation keys  
(Up/Down/Left/Right)  
Right soft key  
Power on/off/  
Menu exit key  
Cancel/Delete key  
Alphanumeric  
keys  
Special  
function keys  
Microphone  
6
       
Get started  
First steps to operating your phone  
Insert the SIM  
card.  
SIM card information  
Make sure that the  
gold-coloured  
contacts on the card  
are face down.  
When you subscribe to a cellular network, you  
receive a plug-in SIM (Subscriber Identity  
Module) card loaded with your subscription  
details, such as your PIN, and available optional  
services.  
Install the battery.  
Install and charge the phone  
Remove the  
battery cover.  
Reattach the cover.  
If the phone is  
already on, first turn  
it off by pressing and  
holding [  
].  
7
       
Get started  
Plug the travel  
adapter into the  
phone.  
Remove the  
adapter from the  
phone.  
Plug the adapter into a standard AC wall  
outlet.  
Low battery indicator  
When the battery is low:  
a warning tone sounds,  
the low battery message displays, and  
the empty battery icon  
When the phone is completely charged  
(the battery icon becomes still), unplug the  
adapter from the wall outlet.  
blinks.  
If the battery level becomes too low, the phone  
automatically turns off. Recharge your battery.  
8
Power on or off  
Keys and display  
Keys  
Switch on  
1. Open the phone.  
In Menu mode, perform the  
function indicated on the bottom  
line of the display.  
2. Press and hold [ ].  
Do not turn on  
the phone when  
mobile phone  
use is  
3. If necessary, enter the PIN  
and press <OK>.  
In Idle mode, access your  
favourite menus directly.  
prohibited.  
p. 98  
In Menu mode, scroll through  
menu options.  
Switch off  
1. Open the phone.  
In Idle mode, enter Menu mode.  
Also, launch the i-mode browser  
when held down.  
2. Press and hold [ ].  
In Menu mode, select the  
highlighted menu option or  
confirm input.  
9
   
Get started  
Make or answer a call.  
Enter numbers, letters, and some  
special characters.  
In Idle mode, retrieve numbers  
recently dialled, missed, or  
received.  
In Idle mode, press and hold [  
to access your voicemail server.  
Press and hold [ ] to enter an  
1]  
0
Press and hold to switch the  
phone on or off.  
End a call.  
international call prefix.  
Enter special characters.  
In Idle mode, press and hold [  
to activate or deactivate Quiet  
mode. Press and hold [ ] to  
]
In Menu mode, cancel input and  
return the phone to Idle mode.  
enter a pause between numbers.  
Delete characters from the  
display.  
In Menu mode, return to the  
previous menu level.  
10  
Adjust the phone volume.  
Move back to the previous file  
during playback.  
In Idle mode, with the phone  
open, adjust the key tone  
volume. With the phone closed,  
press and hold to turn on the  
external display.  
Skip to the next file during  
playback.  
Press and hold to activate the  
touch keypad first before playing  
the media player with the phone  
closed.  
Display  
Layout  
Icons  
display various icons.  
Text and graphics  
display messages,  
instructions, and  
In Idle mode, press and hold to  
turn on the camera.  
In Camera mode, take a photo or  
record a video.  
information you enter.  
Soft key function  
i-mail  
i-mode  
indicators  
Press and hold to launch or close  
the media player.  
show the current  
functions assigned  
to the soft keys.  
Start playing music or pause  
playback.  
11  
Get started  
Icons1  
Received signal strength  
Call ringer set to vibrate  
Quiet mode (Vibration)  
Quiet mode (Mute)  
New i-mail or MMS message  
• Grey: a message on your  
phone; when a message is  
being retrieved, the icon  
blinks  
• Yellow: a message on the  
i-mode server  
Mute mode, during a call  
Synchronised with PC  
Music playback in progress  
Music playback paused  
• Red: Inbox is full  
Connected to Bluetooth  
hands-free car kit or  
headset  
Connected to Java  
application  
Call in progress  
Bluetooth active  
New SMS message  
New voicemail  
Out of your service area;  
you cannot make or receive  
calls  
12  
Access menu functions  
Memory card inserted  
Alarm set  
Use the soft  
keys  
The roles of the soft keys vary  
depending on the function you  
are using. The bottom line of  
the display indicates their  
current role.  
Roaming network  
Home Zone, if registered for  
the appropriate service  
Office Zone, if registered for  
the appropriate service  
Select  
Back  
i-mode is active  
• Yellow: in a GPRS network  
• Grey: in a GSM network  
i-mode connection is being  
made  
i-mode is locked  
Battery power level  
Press the left  
Press the right  
soft key to return  
to the previous  
menu level.  
soft key to select  
the highlighted  
option.  
1. Depending on your country or service provider, the  
icons shown on the display may vary.  
13  
 
Get started  
Select an  
option  
1. Press the appropriate soft  
key.  
Use  
shortcuts  
Press the number key  
corresponding to the option  
you want.  
2. Press the Navigation keys  
to move to the next or  
previous option.  
Customise your phone  
3. Press <Select> or [Centre]  
to confirm the function  
displayed or option  
1. In Idle mode, press  
Display  
language  
[Centre] and select  
Settings  
settings  
Phone  
Language  
highlighted.  
.
2. Select a language.  
4. To exit, choose either of the  
following methods.  
• Press <Back> or [  
C] to  
You can set wallpaper for the  
idle screen on the main display.  
Idle mode  
wallpaper  
move up one level.  
• Press [ ] to return to  
Idle mode.  
1. In Idle mode, press  
[Centre] and select  
Settings  
settings  
Display  
Wallpaper  
.
Main display  
14  
 
2. Select an image or a video  
category.  
1. In Idle mode, press [Centre]  
and select Settings  
Sound settings  
Incoming call  
Call ringer  
melody  
3. Select an image or a video.  
4. Press <Select>.  
Ringtone  
.
2. Select a ringtone category.  
3. Select a ringtone.  
5. Press <Save>.  
4. Press <Save>.  
You can change the colour for  
the display components, such  
as title bars and highlight bars.  
Menu mode  
skin colour  
You can set the Navigation  
keys as shortcuts to access  
your favourite menus.  
Menu  
shortcuts  
1. In Idle mode, press  
[Centre] and select  
Settings  
settings  
Display  
Skin  
1. In Idle mode, press  
[Centre] and select  
.
Settings  
settings  
Phone  
Shortcuts  
2. Select a colour pattern.  
.
2. Select a key.  
3. Select a menu to be  
assigned to the key.  
15  
Get started  
You can switch the phone to  
Quiet mode to avoid disturbing  
other people.  
Press and hold [ ] in Idle  
mode.  
You can protect the phone  
against unauthorised use with  
a phone password. The phone  
will require the password on  
power-up.  
Quiet mode  
Phone lock  
1. In Idle mode, press  
[Centre] and select  
Settings  
Security  
Phone lock  
.
2. Select Enable  
.
3. Set up a 4- to 8- digit  
password, and re-enter it  
for confirmation and press  
<OK>.  
16  
Make/Answer calls  
Step outside the phone  
Begin with your camera, the media player, the web,  
and other special features  
1. In Idle mode, enter an area  
Make a call  
code and phone number.  
2. Press [ ].  
Use the camera  
3. To end the call, press [ ].  
1. In Idle mode, press and  
Take a photo  
1. When the phone rings,  
press [ ].  
hold [  
]
to turn on the  
Answer  
a call  
camera.  
2. To end the call, press [ ].  
2. Aim the lens at the subject  
and make any desired  
adjustments.  
Press [ / ].  
Adjust the  
volume  
during a call  
3. Press [Centre] or [ ] to  
take a photo. The photo is  
saved automatically.  
4. Press <Preview> to take  
another photo.  
17  
       
Step outside the phone  
1. In Idle mode, press  
[Centre] and select My files  
Images My photos  
1. In Idle mode, press  
View a  
photo  
Play a video  
[Centre] and select My files  
.
Videos  
My video  
clips  
.
2. Select the photo you want.  
2. Select the video you want.  
1. In Idle mode, press and  
hold [ ] to turn on the  
camera.  
Record  
a video  
Play media  
2. Press [1] to switch to  
Use these methods:  
Copy media  
files to the  
phone  
Record mode.  
Download from the wireless  
web p. 63  
3. Press [Centre] or [ ] to  
start recording.  
Download from a computer  
using the optional Samsung  
4. Press [Centre], < >, or  
PC StudioSamsung PC  
[
] to stop recording. The  
Studio User’s Guide  
video is saved  
automatically.  
Receive via Bluetooth  
p. 105  
5. Press <Preview> to record  
another video.  
18  
 
Copy to a memory card and  
insert the card into the  
phonep. 26  
1. From the media player  
screen, press [Centre].  
Play media  
files  
2. During playback, use the  
following keys:  
1. In Idle mode, press  
[Centre] and select  
• Centre: pauses or  
resumes playback.  
• Left: moves back to the  
previous file.  
Create a  
play list  
Applications  
player  
Media  
.
• Right: skips to the next  
file.  
• Up: opens the play list.  
2. Press <Options> and  
select Add media from  
Phone or Memory card  
.
/ : adjusts the volume.  
3. Press [Centre] to select the  
files you want and press  
<Select>.  
• Down: stops playback.  
4. Press <Back> to return to  
the media player screen.  
19  
Step outside the phone  
Browse the web  
Use Phonebook  
Using the i-mode browser, you can easily access  
the wireless web to get a variety of up-to-date  
services and information and to enjoy  
downloads of web content.  
To the phone’s memory:  
Add a  
contact  
1. In Idle mode, enter a phone  
number and press  
<
Options>.  
In Idle mode, press and hold  
Launch the  
[Centre].  
i-mode  
browser  
2. Select Save contact  
Phone  
type.  
New  
a number  
3. Specify contact information:  
First name, Last name,  
Mobile, Home, Office, Fax,  
Other, Email, Caller ID,  
Ringtone, Group, and Note.  
To scroll through browser  
items, press [Up] or  
[Down].  
To select an item, press  
[Centre].  
To return to the previous  
page, press [Left].  
To access browser options,  
press <Options>.  
Navigate  
the i-mode  
browser  
4. Press <Save> to save the  
contact.  
20  
   
To the SIM card:  
1. In Idle mode, press  
[Centre] and select  
Create and  
send a name  
card  
1. In Idle mode, enter a phone  
number and press  
Phonebook  
card  
My name  
.
<
Options>.  
2. Select Save contact  
SIM New  
3. Enter a name and press  
2. Specify your contact  
information.  
.
3. Press <Save> to save the  
name card.  
<
Save> to save the  
contact.  
4. To send the name card,  
press <Options> and  
select Send via  
a
1. In Idle mode, press [Centre]  
Find a  
contact  
sending method.  
and select Phonebook  
Contact list  
.
2. Select a contact.  
3. Scroll to a number and press  
] to dial, or press  
[
[Centre] to edit contact  
information.  
21  
Step outside the phone  
Send messages  
1. In Idle mode, press  
i-mail> and select  
Compose MMS  
Send an  
MMS  
message  
(MMS)  
<
1. In Idle mode, press  
[Centre] and select  
Messages Create  
message  
.
Send a text  
message  
(SMS)  
2. Select the field.  
.
3. Enter destination numbers  
or e-mail addresses and  
press [Centre].  
2. Enter your message.  
3. Press <Options> and  
select Save and send or  
Send only  
4. Select the  
field.  
.
5. Enter the message title and  
press [Centre].  
4. Enter destination numbers.  
6. Select SMIL  
add text, images, sounds,  
and videos.  
Media and  
5. Press [Centre] to send the  
message.  
7. On the slide preview screen,  
press <Options> and  
select Send to send the  
message.  
22  
 
1. In Idle mode, press  
i-mail> and select  
Compose i-mail  
8. Select the attachment field  
and use the following  
options for adding files:  
Send an  
i-mail  
<
.
Attach File: add images,  
sounds, videos, name  
2. Select the field.  
3. Enter destination numbers  
or e-mail addresses and  
press [Centre].  
cards, or schedule items.  
Attach Melody: add MFi  
(Melody Format for  
i-mode) melody files.  
Attach Bookmark: add  
bookmarks.  
4. Select the  
field.  
5. Enter the mail title and  
press [Centre].  
9. Select the  
field.  
6. Move to the  
files.  
field to add  
10.Enter the mail text and  
press [Centre].  
7. Press <Options> and  
select Attach File Menu  
.
11.Select Send to send the  
mail.  
23  
Step outside the phone  
View messages  
Use Bluetooth  
Your phone is equipped with Bluetooth  
technology which enables you to connect the  
phone wirelessly to other Bluetooth devices and  
exchange data with them, talk hands-free, or  
control the phone remotely.  
When a notification appears:  
View a text  
message  
1. Press <View>.  
2. Select the message from  
the Inbox.  
From the Inbox:  
1. In Idle mode, press  
Turn on  
[Centre] and select  
Bluetooth  
1. In Idle mode, press  
[Centre] and select  
Settings  
Bluetooth  
Activation  
2. Select My phone’s  
visibility On to allow  
On.  
Messages  
messages  
My  
Inbox  
.
2. Select a message.  
other devices to find your  
phone.  
1. In Idle mode, press  
View an  
i-mail or  
MMS  
<
i-mail> and select Inbox  
an Inbox folder.  
2. Select a message.  
message  
24  
   
1. In Idle mode, press  
[Centre] and select  
1. Access an application, such  
as Phonebook My files  
or Calendar  
Search for  
and pair  
with a  
Bluetooth  
device  
Send data  
,
,
Settings  
My devices  
new devices  
Bluetooth  
.
.
Search for  
2. Scroll to an item.  
3. Press <Options> and  
2. Select a device.  
select Send via  
Bluetooth Search for  
new devices  
3. Enter a Bluetooth PIN or the  
other device’s Bluetooth  
PIN, if it has one, and press  
.
4. Select a device.  
<OK>.  
5. If necessary, enter the  
Bluetooth PIN and press  
When the owner of the  
other device enters the  
same code, pairing is  
complete.  
<OK>.  
25  
Step outside the phone  
Use a memory card  
You can use an optional microSD memory card  
to increase your phone’s memory capacity.  
To receive data via Bluetooth,  
your phone’s Bluetooth feature  
must be active.  
s
Receive data  
1. When a device attempts to  
access your phone, press  
Frequent erasing and  
writing will shorten a card’s  
lifespan.  
Do not remove a card from  
the phone or turn off the  
phone while data is being  
accessed or transferred.  
This could result in loss of  
data and/or damage to the  
card or phone.  
Important  
memory  
card  
<
Yes> to permit the  
connection.  
information  
2. If necessary, press <Yes  
to confirm that you are  
willing to receive.  
>
Do not subject cards to  
strong shocks.  
Do not touch card terminals  
with your fingers or metal  
objects. If dirty, wipe the  
card with a soft cloth.  
26  
   
Do not expose cards in a  
place subject to electro-  
static discharge and/or  
electrical noise.  
Keep cards away from small  
children or pets.  
1. Press the card so that it is  
disengaged from the phone.  
Remove the  
memory  
card  
2. Slide the card out of the  
slot.  
Using a card adapter and a  
USB card reader/writer, you  
can read the card on a  
computer.  
Use a card  
adapter  
1. Slide a memory card into  
the card slot, with the label  
side face down.  
Insert a  
memory  
card  
1. Insert a memory card into a  
card adapter, and then the  
adapter into a card reader/  
writer.  
2. Press the card until it locks  
into place.  
27  
Step outside the phone  
2. Plug the USB connecter of  
Depending on your  
Use a card  
adapter  
(continued)  
Important  
TV  
information  
the card reader/writer into  
the USB port on your  
computer.  
particular TV model, the  
location and shape of the  
video input and audio  
output ports may vary.  
Match cable connector and  
TV port colours.  
3. Access the appropriate  
memory disk and copy to  
and from the card.  
Depending on the video  
system, the image may  
vibrate or in some other  
way be less than optimal.  
Depending on the video  
quality, some video clips  
may not display.  
You cannot use a Bluetooth  
stereo headset or the  
zooming feature in TV Out  
mode.  
Watch the phone display on a TV  
You can view the display of your phone on a TV  
screen by connecting the phone and TV with a  
TV out cable. This enables you to enjoy the  
photos, videos and music stored in the phone’s  
memory with your family or friends on a larger  
screen.  
28  
 
1. With the TV switched on,  
connect your phone to the  
TV with a TV out cable, as  
shown.  
3. If necessary, set the video  
system for your TV in the  
TV-out settings menu.  
Transfer  
phone  
display to  
a TV  
p. 100  
4. Access the application you  
want and open files.  
2. Switch the TV to External  
Input mode.  
The display switches to TV  
Out mode and you can view  
the phone’s display on the  
TV screen.  
29  
Using Chinese Stroke mode  
This mode allows you to enter individual  
Chinese strokes, in written order, from top to  
bottom, and from left to right.  
Enter text  
Stroke, T9 English, ABC, Number, and Symbol  
modes  
You can enter text for some features, such as  
Messages, Phonebook, or Calendar, by using  
Stroke modes for Chinese, and Quick English  
and English modes for English. You can also  
enter numbers and symbols.  
The Chinese strokes are classified into five basic  
categories; heng, shu, pie, dian, and zhe. The  
basic strokes are printed on keys [  
1] to [5] on  
the keypad.  
Refer to the following table:  
Category  
Key  
Strokes represented in each category  
Changing the text input mode  
Press the right soft key and select the text  
input mode you want.  
Chinese T Stroke (  
T9 English (  
)
)
ABC (  
)
Number (  
)
Symbol (No indicator)  
Press and hold [ ] to quickly switch to  
Symbol mode  
30  
 
Entering strokes and characters in  
Stroke mode  
Rapid character entry  
Try entering the characters  
using the  
], and [ ]. Even  
is a fifteen stroke character, your  
following keystrokes: [  
though  
2
], [  
8
7
1. Press the keys that correspond to a  
character’s component strokes. Press keys in  
the order that you would write the strokes,  
using one press per stroke.  
phone allows you to enter the complete pair in  
only three key presses.  
Example: To enter  
and [ ] to enter  
, press [  
5] to enter  
Tips for Stroke mode  
3
.
Press [ ] to insert a space.  
Press and hold [ ] to start a new line.  
Press [Left] or [Right] to move the cursor.  
If you are uncertain of the stroke order,  
press [ ] in place of each questionable  
6
stroke. Continue entering strokes until the  
character displays or until you finish the  
character.  
Press [  
and hold [  
C
] to clear letters one by one. Press  
C] to clear the entire display.  
2. Press [Up] or [Down] to scroll through the  
choices.  
Using T9 English mode  
3. To select a character and add it to your  
message, press the corresponding key, [  
This mode allows you to enter English by using  
T9 technology. T9 is a predictive text input  
mode that allows you to key in any character  
using single keystrokes.  
7]  
to [ ].  
31  
Enter text  
Entering a word in T9 English mode  
Tips for using T9 English mode  
1. Press [  
2
] to [  
9
] to start entering a word.  
Press [  
automatically.  
Press [ to change case.  
Press and hold [ ] to start a new line.  
Press the Navigation keys to move the  
cursor.  
1] to enter periods or apostrophes  
Press each key once for each letter.  
Example: Press [4], [3], [5], [5], and [6]  
to enter Hello.  
]
T9 predicts the word that you are typing,  
and it may change with each key that you  
press.  
2. Enter the whole word before editing or  
deleting the characters.  
Press [  
C
] to delete characters one by one.  
Press and hold [  
C] to clear the entire display.  
Adding a new word to the T9 dictionary  
3. When the word displays correctly, go to step  
4. Otherwise, press [ ] to display alternative  
word choices for the keys that you have  
pressed.  
0
1. Enter the word that you want to add.  
2. Press [0] to display alternative words for  
your keys presses. When there are no more  
alternative words, Add appears on the  
bottom line.  
Example: Of and Me use [  
4. Press [ to insert a space and enter the  
next word.  
6] and [3].  
]
3. Press <Add>.  
4. Enter the word you want using ABC mode  
and press <OK>.  
32  
Using ABC mode  
Using Number mode  
Press the appropriate key until the character  
you want appears on the display.  
Number mode enables you to enter numbers.  
Press the keys corresponding to the digits you  
want.  
Tips for using ABC mode  
To enter the same letter twice or to enter a  
different letter on the same key, wait for the  
cursor to move to the right automatically or  
press [Right]. Then, enter the next letter.  
Press [ ] to change case.  
Press [ ] to insert a space.  
Press and hold [ ] to start a new line.  
Press the Navigation keys to move the  
cursor.  
Using Symbol mode  
Symbol mode enables you to insert symbols.  
To  
Press  
scroll to a symbol set  
select a symbol  
the Navigation keys.  
the corresponding  
number key.  
clear the symbols  
insert the symbols  
[
C
].  
Press [  
Press and hold [  
C
] to delete characters one by one.  
] to clear the display.  
C
<
OK>.  
33  
Making an international call  
Call functions  
Advanced calling features  
1. In Idle mode, press and hold [  
character appears.  
0]. The  
+
2. Enter the country code, area code, and  
phone number, then press [ ].  
Making a call  
1. In Idle mode, enter the area code and phone  
number.  
Redialling recent numbers  
1. In Idle mode, press [ ] to display the list of  
recent numbers.  
2. Scroll to the number you want and press  
• Press [  
and hold [  
C
] to clear the last digit or press  
C] to clear the whole display.  
You can move the cursor to edit an  
incorrect digit.  
[
].  
• Press and hold [ ] to enter a pause  
between numbers.  
Making a call from Phonebook  
Once you have stored a number in Phonebook,  
you can dial the number by selecting it from  
Phonebook.p. 41  
2. Press [ ].  
3. When you want to end the call, press [ ].  
You can also use the speed dial feature to  
assign your most frequently dialled numbers to  
specific number keys.p. 44  
34  
   
You can quickly dial a number from the SIM  
card using its location number assigned when  
stored.  
When Active folder is active, you can  
simply open the phone. p. 98  
Press [ ] or <Reject> to reject a call.  
1. In Idle mode, enter a location number and  
press [ ].  
2. Press [Left] or [Right] to scroll through other  
numbers.  
Press and hold [ / ] to reject a call or mute  
the ringer, depending on the Volume key  
setting.  
p. 98  
Viewing missed calls  
If you have missed calls, the screen displays  
how many calls you have missed.  
3. Press <Dial> or [ ] to dial the number you  
want.  
Answering a call  
1. Press <View>.  
When you receive an incoming call, the phone  
rings and displays the incoming call image.  
Press <Accept> or [ ] to answer the call.  
2. If necessary, scroll through the missed calls.  
3. Press [ ] to dial the number you want.  
Tips for answering a call  
When Anykey answer is active, you can  
press any key, except for [ ] and  
<Reject>.p. 98  
35  
Adjusting the volume during a call  
Using the headset  
Use [ / ] to adjust the earpiece volume during  
a call.  
Use the headset to make or answer calls  
without holding the phone.  
Press [ ] to increase the volume level and [  
to decrease the volume level.  
]
Connect the headset to the jack on the left side  
of the phone. The button on the headset works  
as follows:  
Placing a call on hold/Retrieving  
Press <Hold> or <Retrieve> to place a call on  
hold or retrieve the call.  
To  
Press  
redial the last call  
and hold the button  
twice.  
Making a second call  
You can make another call if your network  
supports it.  
answer a call  
end a call  
the button.  
the button.  
1. Press <Hold> to put the call on hold.  
2. Make the second call in the normal way.  
3. Press <Swap> to switch between the calls.  
Options during a call  
You can access a number of functions during a  
call.  
4. Press <Options> and select End held call  
to end the call on hold.  
5. To end the current call, press [ ].  
36  
Answering a second call  
Using In-call options  
You can answer an incoming call while already  
on the phone, if your network supports it and  
you have activated the call waiting feature.  
Press <Options> to access the following  
options during a call:  
Speaker on/Normal: turn on the  
speakerphone feature or switch back to  
Normal mode.  
p. 104  
1. Press [ ] to answer the call. The first call is  
automatically put on hold.  
2. Press <Swap> to switch between the calls.  
3. Press <Options> and select End held call  
to end the call on hold.  
Switch to headset/Switch to phone:  
switch the call to a Bluetooth headset or  
hands-free car kit or back to the phone.  
Menu: access the phone's menu functions.  
Voice off/Voice on: switch off the phone’s  
microphone so that the other person on the  
phone cannot hear you, or switch it back on.  
4. To end the current call, press [ ].  
Using the speakerphone feature  
Use the phone as a speakerphone to talk and  
listen with the phone a short distance away.  
Press [Centre] and then <Yes> to activate the  
speakerphone feature. Press [Centre] again to  
switch back to the earpiece.  
Mute keys  
/Send keys: switch the key  
tones on or off.  
To communicate with answering machines or  
computerised telephone systems, Send  
keys must be selected.  
37  
Call functions  
Send DTMF: send the DTMF (Dual tone  
multi-frequency) tones as a group. The  
DTMF tones are the tones used in phones for  
tone dialling, sounding when you press the  
number keys. This option is helpful for  
entering a password or an account number  
when you call an automated system, like a  
banking service.  
Private: have a private conversation with  
one multi-party call participant. The other  
participants can converse with each other.  
After the private conversation, select Join to  
return to the multi-party call.  
Removed: disconnect one multi-party call  
participant.  
End held call: disconnect the call currently  
on hold.  
Phonebook: access the contact list.  
Join: set up a multi-party call by adding a  
caller on hold to a currently active call. You  
can include up to 5 people on a multi-party  
call.  
Transfer: transfer the currently active call  
to a caller on hold. The two callers can talk  
to each other, but you are disconnected from  
the call.  
Select one: select one of multi-party call  
participants. You can then use the following  
options:  
38  
2. Press [Up] or [Down] to scroll through the  
call list.  
3. Press [Centre] to view the details of a call, or  
press [ ] to dial a number.  
Menu functions  
All menu options listed  
Call log (Menu 1)  
Using call log options  
Use this menu to view the calls you have  
dialled, received, or missed, and the length of  
the calls. You can also check the cost of your  
calls, if your SIM card supports this function.  
While viewing call details, press <Options> to  
access the following options:  
Call: paste the number to the dialling  
screen.  
To access this menu, press [Centre] in Idle  
Add to Phonebook: save the number to  
Phonebook.  
Send: send an SMS, i-mail, or MMS  
message to the selected number.  
Delete: delete the selected call log or all  
logs.  
View contact: access contact information,  
if the caller is saved in Phonebook.  
mode and select Call log  
.
Recent contacts (Menu 1.1)  
This menu displays the most recent calls  
dialled, received, or missed.  
Accessing a call log  
1. Press [Left] or [Right] to move to another  
call type.  
39  
       
Menu functions  
2. Press <Delete>.  
Missed calls (Menu 1.2)  
3. Press <Yes> to confirm the deletion.  
This menu displays the most recent calls you  
did not answer.  
Call time (Menu 1.6)  
Dialled calls (Menu 1.3)  
This menu displays the time log for calls made  
and received. The actual time invoiced by your  
service provider will vary.  
This menu displays the most recent calls you  
have dialled.  
Last call time: check the length of your last  
call.  
Received calls (Menu 1.4)  
Total dialled calls: check the total length  
of all the calls you have dialled.  
Total received calls: check the total length  
This menu displays the most recent calls you  
have received.  
of all the calls you have received.  
Delete all (Menu 1.5)  
To reset the call timers, press <Reset>. You  
need to enter the phone password.  
Use this menu to delete all of the logs in each  
call type.  
You can set the phone‘s password the first time  
you access a menu requiring the password. You  
1. Press [Centre] to select the call types to be  
cleared.  
can change the phone‘s password.p. 109  
40  
         
Call costs (Menu 1.7)  
Phonebook (Menu 2)  
You can store phone numbers on your SIM card  
and in your phone’s memory. The SIM card and  
phone’s memory are physically separate, but  
they are used as a single entity called  
Phonebook.  
This network feature displays the cost of calls.  
This menu is available only if supported by your  
SIM card. Note that this is not intended to be  
used for billing purposes.  
Last call cost: check the cost of your last  
call.  
To access this menu, press [Centre] in Idle  
mode and select Phonebook  
.
Total cost: check the total cost of all of your  
calls. If the total cost exceeds the maximum  
cost set in Set max. cost, you must reset  
the counter before you can make another  
call.  
Contact list (Menu 2.1)  
Use this menu to search for numbers in  
Phonebook.  
Max. cost: check the maximum cost limit  
set in Set max. cost  
Reset counters: reset the cost counters.  
Set max. cost: set the maximum cost  
authorised for your calls.  
Price/Unit: set the price per unit that is  
applied when the cost of your calls is  
calculated.  
.
Finding a contact  
1. Enter the first few letters of the name that  
you want to find.  
2. Select a contact from the list.  
3. Scroll to a number and press [ ] to dial, or  
press [Centre] to edit contact information.  
41  
       
Menu functions  
Using Phonebook options  
Storing a contact in the phone’s  
memory  
While viewing contact details, press  
<Options> to access the following options:  
1. Select Phone  
.
Edit: edit contact information.  
2. Change the settings or enter information  
about the contact.  
Send message: send an SMS, i-mail, or  
MMS message to the selected number, or to  
the selected e-mail address.  
Copy to: copy the selected number to the  
phone’s memory or to the SIM card.  
Send via: send the contact via SMS, i-mail,  
MMS, or Bluetooth.  
Delete: delete the selected contact.  
First name  
Mobile Home  
number in any type.  
/
Last name: assign a name.  
/
/
Office Fax Other: add a  
/
/
Email: assign an e-mail address.  
Caller ID: assign an image or video to  
alert you to a call from the person.  
Ringtone: assign a ringtone to alert you  
to a call from the person.  
Group: assign the contact to a caller  
group.  
Create contact (Menu 2.2)  
Use this menu to add a new contact to  
Phonebook.  
Note: add a memo about the person.  
3. Press <Save> to save the contact.  
42  
   
3. Select the caller ID line and set an image or  
video.  
4. Select the ringtone line and set a melody.  
Storing a contact on the SIM card  
1. Select SIM  
2. Enter information about the contact.  
.
5. Press <Save> to save the group.  
Name: assign a name.  
Phone number: add a number.  
Location: assign a location number.  
Adding members to a caller group  
1. Select a group.  
2. Press <Add>.  
3. Press [Centre] to select the contacts to be  
added.  
To assign a caller ID image or video,  
ringtone, or group, the contact must be  
saved to the phone’s memory.  
3. Press <Save> to save the contact.  
4. Press <Options> and select Select  
.
Group (Menu 2.3)  
Managing caller groups  
While viewing the group list, press <Options  
to access the following options:  
>
Use this menu to organise your contacts in  
caller groups.  
View: display the members of the selected  
group.  
Creating a new caller group  
Create group: add a new group.  
Edit: change the group properties.  
1. Press <Options> and select Create group  
2. Enter a name for the group.  
.
43  
 
Menu functions  
Send message: send an SMS, i-mail, or  
MMS to the group members you want.  
Delete: delete the selected group or all  
groups. Group members, however, will not  
be deleted from Phonebook.  
Managing speed dial entries  
From the Speed dial screen, press <Options  
to access the following options:  
>
Add: assign a number to an unassigned key.  
View: check the name and number assigned  
to a key.  
Speed dial (Menu 2.4)  
Change: assign a different number to a key.  
Remove: clear the speed dial setting for a  
key.  
Use this menu to assign a speed dial number  
(2 to 9) for 8 of your most frequently dialled  
numbers.  
Dialling speed dial numbers  
Assigning speed dial numbers  
In Idle mode, press and hold the appropriate  
key.  
1. Select a key location from  
2
to  
9
. Key  
1
is  
reserved for your voicemail server.  
My name card (Menu 2.5)  
2. Select a contact from the contact list.  
3. Select a number, if the contact has more  
than one number.  
Use this menu to create a name card and send  
it to other people.  
44  
     
Saving your name card  
Management (Menu 2.7)  
The procedure for creating your name card is  
the same as the one for saving a phone number  
Use this menu to manage contacts in  
Phonebook.  
in the phone’s memory.p. 42  
Save new contact to: select a default  
memory location for saving contacts. If you  
select Always ask, the phone will ask you to  
select a memory location each time you save  
a number.  
Using name card options  
After saving your name card, press <Options  
to access the following options:  
>
Edit: edit the name card.  
Send via: send the name card via SMS,  
i-mail, MMS, or Bluetooth.  
Copy all to: copy all of the contacts stored  
on the SIM card to the phone’s memory, or  
vice versa.  
Delete all: delete all of the contacts from  
your phone’s memory, your SIM card, or  
both.  
Memory status: check the number of  
contacts you have stored in the phone’s  
memory and on the SIM card.  
Exchange namecard: exchange name  
cards with another person via Bluetooth.  
Delete: delete the name card.  
Own number (Menu 2.6)  
Use this feature to check your phone numbers,  
or to assign a name to each of the numbers.  
Changes made here do not affect the actual  
subscriber numbers on your SIM card.  
45  
   
Menu functions  
Service number (Menu 2.8)  
Media player (Menu 3.1)  
Use this menu to view the list of Service Dialling  
Numbers (SDN) assigned by your service  
provider, including emergency numbers and  
numbers for directory enquiries. This menu is  
available if your SIM card supports SDN.  
Use this menu to enjoy media. First, you need  
to save media files into your phone’s memory or  
on a memory card. You can play *.mp3, *.3gp,  
*.aac, *.wma, and *.m4a files.  
To enjoy high quality media, you can use an  
optional Bluetooth stereo headset.  
1. Scroll to the number you want and press  
<View>.  
Normal headsets are not compatible with the  
media player.  
2. Press <Dial> or [ ].  
Downloading or receiving media files  
Applications (Menu 3)  
Use these methods to save media files to your  
phone’s memory:  
Use this menu to play media files, edit photos,  
or play Java games. You can also use  
convenient features, such as a voice recorder,  
world clock, alarm clock, calculator, converter,  
timer, and stopwatch.  
Download from the wireless web  
Download from a computer using the  
p. 63  
optional Samsung PC Studio  
Samsung PC  
Studio User’s Guide  
To access this menu, press [Centre] in Idle  
mode and select Applications  
.
46  
     
Receive via an active Bluetooth connection  
p. 105  
Copy to a memory card and insert the card  
into the phone p. 26  
2. Select Phone to use the phone speaker.  
Select Bluetooth stereo headset to use a  
Bluetooth stereo headset and then search for  
and connect the phone to the headset.  
During playback, use the following keys:  
The downloaded or received files are stored in  
the Music or Videos folder.  
p. 80  
Key  
Centre  
Left  
Right  
Up  
Function  
Creating a play list  
Pauses or resumes playback.  
Returns to the previous file.  
Skips to the next file.  
1. From the media player screen, press  
Options> and select Add media from  
Phone or Memory card  
<
.
2. Press [Centre] to select the files to be added  
and press <Select>.  
3. Press <Back> to return to the media player  
screen.  
Opens the current play list.  
Stops playback.  
Down  
/
Adjusts the volume level.  
Turns 3D sound on or off.  
Changes the playback animation.  
Playing media files  
1
1. From the media player screen, press  
2
<Options> and select Play via.  
47  
 
Menu functions  
Remove from playlist: remove the  
selected file from the play list.  
Settings: change the default settings for  
playing media files:  
Repeat mode: select a repeat mode.  
Shuffle: set the media player to play media  
at random.  
Music overrides other sounds: set the  
media player to continue playback even if  
you exit it.  
Equaliser: select an equaliser setting.  
3D sound: turn 3D sound on or off.  
Visualisation: change the playback  
animation.  
Skin: select a skin type.  
Volume: select a volume level.  
Details: access the file properties.  
Key  
3
Function  
Changes the repeat mode.  
Changes the equaliser mode.  
Changes the skin type.  
4
5
6
Turns Shuffle mode on or off.  
Using media player options  
During playback, press <Options> to access  
the following options:  
Play  
/Pause: begin or pause playback.  
Transfer to Bluetooth stereo headset  
/
Transfer to phone: switch sound output to  
a Bluetooth stereo headset or the phone  
speaker.  
Open: access the play list of the current  
album or album list.  
48  
Accessing the play list  
Playing music files with the phone  
closed  
From the media player screen, press [Up].  
1. Press and hold [ / ] to activate the touch  
keypad first.  
Press <Options> to access the following  
options:  
2. Press and hold [  
player.  
] to launch the media  
Play: play the currently selected file via  
phone or Bluetooth stereo headset.  
Add music from: add files to the play list.  
Go to album list: access the album list.  
Move to: move the selected file to another  
play list.  
Use the following keys to control the media  
player:  
Key  
Function  
Begins or pauses playback.  
Returns to the previous file.  
Skips to the next file.  
Adjusts the volume.  
Copy to: copy the selected file to another  
play list.  
Move track in playlist: move the selected  
file to the position you want within the play  
list.  
Remove: remove the selected file or the  
files you want from the play list.  
/
Details: access the file properties.  
49  
Menu functions  
During playback, use the following keys:  
Voice recorder (Menu 3.2)  
Key  
Function  
Use this menu to record voice memos. A voice  
memo can be up to one hour long.  
Centre  
Left  
Pauses or resumes playback.  
Moves backward in a memo.  
Moves forward in a memo.  
Adjusts the volume.  
Stops playback.  
Recording a voice memo  
1. Press [Centre] to start recording.  
2. Speak into the microphone.  
Press [Centre] to pause or resume  
recording.  
3. Press <Stop> or [Down] to end recording.  
The voice memo is saved automatically.  
Right  
/
Down  
Changing the recording mode  
4. Press [Centre] to review the voice memo, or  
[Up] to record a new voice memo.  
You can change the recording mode of the voice  
recorder. The maximum recording time is  
determined by this setting. Before recording a  
memo, press <Options> and select Settings  
Playing a voice memo  
1. From the Voice recorder screen, press  
a recording mode:  
<
Options> and select Go to My voice  
clips  
2. Select a voice memo.  
Limit for multimedia message: record a  
voice memo for adding to an MMS message.  
.
50  
   
Maximum 1 hour: record a voice memo of  
up to one hour.  
Transforming  
1. Select a photo or take a new photo.  
2. Press <Options> and select Transform  
an option:  
Image editor (Menu 3.3)  
Resize: change the photo size.  
Rotate: rotate the photo 90 degrees  
clockwise or counterclockwise.  
Use this menu to edit your photos using various  
editing tools.  
Applying an effect  
Flip: flip the photo.  
1. Press <Options> and select New image  
Open or Take photo  
3. Press <Done>.  
4. Press <Options> and select Save as  
5. Enter a new file name and press [Centre].  
.
.
2. Select a photo or take a new photo.  
3. Press <Options> and select Effects  
effect option.  
an  
Cropping  
4. Press <Done>.  
1. Select a photo or take a new photo.  
5. Press <Options> and select Save as  
.
2. Press <Options> and select Crop  
.
6. Enter a new file name and press [Centre].  
3. Move the cropping frame to the area of the  
image you want.  
Press <Options> and select Resize to  
change the frame size.  
51  
   
Menu functions  
4. Press <Options> and select Done  
.
Merging a stamp effect  
5. Press <Options> and select Save as  
6. Enter a new file name and press [Centre].  
.
This editing tool allows you to make an outline  
stamp of a photo and then merge it with  
another photo. You can use this tool to create  
your own photo postcard by taking a photo of a  
handwritten message and merging it with a  
photo.  
Adding visual features  
You can decorate photos by adding a frame, an  
image, or a note.  
1. Select a photo or take a new photo.  
1. Select a photo or take a new photo.  
2. Press <Options> and select Merge stamp  
The background photo appears in the image  
box next to  
3. Press <Options> and select Add image  
.
2. Press <Options> and select Insert  
a
feature type.  
.
3. Select an item or enter text to be inserted.  
4. Adjust the position of the inserted item or  
text using the Navigation keys.  
.
4. Add a photo by selecting or taking a photo.  
The added photo appears in the image box  
5. Press <Done>, or press <Options> and  
next to  
. This will be the stamp.  
select Done  
.
5. Press <Options> and select Merge. The  
stamp photo is added to the background  
photo as an outline.  
6. Press <Options> and select Save as  
7. Enter a new file name and press [Centre].  
.
52  
6. Press <Options> to access the following  
stamp edit options:  
Alarm (Menu 3.5)  
Use this menu to set alarms. The alert type for  
a normal alarm corresponds to the call alert  
type settings. A wake-up alarm is not affected  
by your sound settings.  
Move: change the position of the stamp.  
Resize: change the stamp size.  
Rotate: rotate the stamp.  
Stamp colour: change the stamp colour.  
Shadow on: apply a shadow to the  
stamp.  
Setting an alarm  
1. Select the type of alarm.  
2. Set each alarm option:  
7. When you have finished, press <Options  
and select Done  
8. Press <Options> and select Save as  
>
.
Alarm: activate the alarm.  
Alarm time: enter the time for the alarm  
to sound.  
.
9. Enter a new file name and press [Centre].  
AM/PM: set AM or PM in 12-hour time  
format.  
Java world (Menu 3.4)  
Repeat: select a repeat option.  
Alarm tone: select an alarm tone.  
Use this menu to access the list of the  
applications you have downloaded from the  
3. Press <Save>.  
wireless web.p. 73  
53  
   
Menu functions  
Stopping an alarm  
Calculator (Menu 3.6)  
For a non-wake-up alarm, press any key.  
For a wake-up alarm, press <Confirm> or  
[Centre].  
Use this menu to perform basic arithmetic  
functions, such as addition, subtraction,  
multiplication, and division.  
Press any key, except for <Confirm> and  
[Centre], to cause it to sound again after 5  
minutes. You can do this a maximum of 5  
times.  
1. Enter the first number.  
Press <.()> to insert a decimal point or  
bracket.  
Press [ ] or [ ] to move the cursor.  
Setting the alarm to sound when the  
phone is off  
2. Press one of the Navigation keys to access  
the math function you want.  
3. Enter the second number.  
4. Press [Centre] to view the result.  
From the Alarm screen, select Auto power-up  
On.  
Even though phone is off when it is time for the  
alarm to sound, the phone sounds the alarm.  
Timer (Menu 3.7)  
Use this menu to set a period of time for the  
phone to count down. The phone sounds an  
alarm when the specified period of time has  
expired.  
54  
   
Starting the timer  
World clock (Menu 3.9)  
1. Press <Set>.  
2. Enter the length of time you want to count  
down and press <OK>.  
Use this menu to set your local time zone and  
find out the current time in another part of the  
world.  
3. Press [Centre] to start counting down.  
Viewing world time  
Stopping the timer  
1. From the world map, press [Left] or [Right]  
to scroll to the city you want. As the time  
line moves, the time and date of the given  
zone display.  
Press any key when the timer rings.  
Press [Centre] on the Timer screen to stop  
the timer before it rings.  
2. Press [Centre] to save the city as your local  
time zone.  
Stopwatch (Menu 3.8)  
Applying daylight saving time  
Use this menu to measure elapsed time. The  
maximum time is 10 hours.  
1. From the world map, press <Options> and  
select Apply daylight saving time  
.
1. Press [Centre] to start the stopwatch.  
2. Press [Centre] to select the time zones you  
want.  
2. Press [Centre] to check an interval. You can  
repeat this step for a total of 4 intervals.  
3. Press <Save>.  
55  
     
Menu functions  
Converter (Menu 3.10)  
SIM AT (Menu 3.11)  
Use this menu for common conversions, such  
as currency and temperature.  
This menu is available if you use a SIM AT card  
that supports SIM Application Toolkit menus  
and provides additional services, such as news,  
weather, sports, entertainment, and location  
services. Available services may vary,  
depending on your service provider’s plans. For  
details, see your SIM card instructions or  
contact your service provider.  
1. Select a converter.  
2. Press [Left] or [Right] to select the original  
unit and press [Down].  
3. Enter the value to be converted and press  
[Down].  
Press [ ] to insert a decimal point.  
Press [ ] to change the temperature to  
above zero (+) or below zero (-).  
Messages (Menu 4)  
Use the Messages menu to send and receive  
text messages. You can also access broadcast  
messages.  
4. Press [Left] or [Right] to select the unit to  
which you want to convert.  
The equivalent value for the amount you  
entered displays.  
To access this menu, press [Centre] in Idle  
mode and select Messages  
.
For the currency converter, you can view and set  
currency rates by pressing <View rate>.  
56  
     
Using options while composing an SMS  
message  
Create message (Menu 4.1)  
Short Message Service (SMS) allows you to  
send text messages that may include simple  
pictures, animated images, and melodies.  
While composing a message, press <Options  
to access the following options:  
>
Save and send: send the message and then  
save it in the Sentbox folder.  
Creating and sending an SMS message  
Send only: just send the message.  
Insert: add a template, Phonebook entry, or  
bookmark.  
Add image/Add animation/Add melody:  
attach a simple image, an animated image,  
or a melody.  
Attach: attach a Phonebook entry as a  
name card or calendar data as a data format  
attachment.  
1. Enter your message and press [Centre].  
• The maximum number of characters  
allowed in a message varies by service  
provider. If your message exceeds the  
maximum number of characters, the  
phone will split the message.  
• You can use various options by pressing  
<Options>.next section  
2. Enter a destination number.  
To send the message to more than one  
recipient, fill in additional destination fields.  
Save in: save the message in another  
message folder.  
Cancel: cancel composing the message.  
3. Press [Centre] to send the message.  
57  
   
Menu functions  
SMS messages  
My messages (Menu 4.2)  
Reply via: reply to the sender via SMS,  
Use this menu to access text messages you  
have received, sent, or which have failed in  
sending.  
i-mail, or MMS.  
Forward: forward the message to other  
people.  
View as vivid message/View as: view the  
message in 3D view mode or switch back to  
normal view mode. This option is available  
only when the message consists of a single  
page.  
Inbox (Menu 4.2.1)  
This folder stores all the text messages you  
have received.  
Viewing a message  
The following icons may appear on the message  
list to show the message type:  
Delete: delete the message.  
Move to phone/Move to SIM: move the  
message between the SIM card and the  
phone’s memory.  
SMS  
Delivery report for your sent messages  
Cut address: extract URLs, e-mail  
addresses, or phone numbers from the  
message.  
Cut media: save media content from the  
message to your phone’s memory.  
Using message options  
While viewing a message, press <Options> to  
access the following options:  
58  
 
Protection: lock the message to protect it  
from being deleted, or unlock the message.  
You can protect only messages stored in the  
phone’s memory.  
Add to Block list: add the sender’s number  
to the Block list to reject the messages from  
the sender.  
Drafts (Menu 4.2.2)  
This folder stores text messages you have  
saved to send at a later time.  
When you select a message, it opens in Edit  
mode so that you can edit and send the  
message.  
Outbox (Menu 4.2.3)  
Delivery reports  
This folder stores text messages that the phone  
is attempting to send or has failed to send.  
The following icons are available to show the  
message status:  
Cut address: extract URL, e-mail  
addresses, or phone numbers from the  
message.  
Delete: delete the message.  
Protection: lock the message to protect it  
Failed to be sent  
from being deleted, or unlock the message.  
While viewing a message, press <Options> to  
access the following options:  
Send again: retry sending the message.  
Forward: forward the message to other  
people.  
59  
Menu functions  
Cut address: extract URLs, e-mail  
addresses, or phone numbers from the  
message.  
Delete: delete the message.  
Protection: lock the message to protect it  
from being deleted, or unlock the message.  
My folders (Menu 4.2.5)  
Use this menu to create new folders and  
organise your text messages.  
Creating a new folder  
1. Press <Yes>.  
2. Enter a folder name and press [Centre].  
Sentbox (Menu 4.2.4)  
Using folder options  
On the folder list, press <Options> to access  
the following options:  
This folder stores text messages that you have  
sent.  
While viewing a message, press <Options> to  
access the following options:  
Open: open the selected folder.  
Create folder: add a new folder.  
Rename folder: change the folder name.  
Delete: delete the selected folder.  
Forward: forward the message to other  
people.  
Cut address: extract URLs, e-mail  
addresses, or phone numbers from the  
message.  
Templates (Menu 4.3)  
Delete: delete the message.  
Protection: lock the message to protect it  
from being deleted, or unlock the message.  
Use this menu to make and use templates of  
frequently used messages.  
60  
 
Pressing the key twice displays the message  
types so that you can specify the ones to be  
cleared.  
Creating a template  
1. Select an empty location.  
2. Enter a message and press [Centre].  
2. Press <Delete>.  
Using template options  
3. Press [Centre] to select the check box to  
delete protected messages, and then press  
From the template list, press <Options> to  
access the following options:  
<Yes>.  
4. Press <Yes> to confirm the deletion.  
Edit: edit the selected template.  
Send message: create and send a text  
message using the template.  
Settings (Menu 4.5)  
Delete: delete the selected template.  
Add new: add a new template.  
Use this menu to set up various options for  
using SMS and broadcast messages.  
Text messages (Menu 4.5.1)  
Delete all (Menu 4.4)  
You can configure SMS settings.  
Use this menu to delete messages in each  
message folder all at once.  
Sending options: set up the options for  
sending SMS messages:  
1. Press [Centre] to select the message folders  
to be cleared.  
Send read receipt: allow recipients to reply  
to you through your SMS server.  
61  
   
Menu functions  
Send delivery receipt: set the network to  
inform you when your messages have been  
delivered.  
Bearer selection: select either GSM or  
GPRS preferred, depending on your  
network.  
Receiving options: activate 3D vivid view  
mode for displaying received SMS messages  
on your phone. The phone will convert  
message text to 3D vivid graphics and  
displays it in 3D view mode. This option is  
available only when the message consists of  
a single page.  
Block list: store the phone numbers from  
which you want to reject messages.  
Current profile: select an SMS setting  
profile.  
Profile settings: set the properties of each  
profile:  
Service centre: store or change the  
number of your SMS server.  
Default destination: enter the default  
destination.  
Default type: set the default message type.  
The network can convert the messages into  
the selected format.  
Default validity: set the length of time  
your messages are stored in the SMS server.  
Setting name: enter a profile name.  
Broadcast messages (Menu 4.5.2)  
You can change the settings for receiving  
broadcast messages.  
Receive: select to receive broadcast  
messages, or not.  
Channel list: indicate the channels from  
which you wish to receive broadcast  
messages. Please contact your service  
provider for further details.  
Language: select the preferred languages  
in which broadcast messages display.  
62  
About i-mode  
Memory status (Menu 4.6)  
In i-mode, browse through your favourite  
magazines, book tickets and hotels for your  
vacations, find your favourite club, download  
the best ringtones and games at the lowest  
price, send live e-mails with photographs. You  
can do all of these economically since with i-  
mode you are charged by the amount of data  
you send and receive, not by the length of time  
you are online.  
Use this menu to view the amount of memory  
currently in use in each message folder.  
i-mode (Menu 5)  
In this menu, you can use the i-mode browser,  
send or receive i-mode mails and MMS  
messages, and access Java applications.  
To access this menu, press [Centre] in Idle  
mode and select i-mode, or press <i-mode  
in Idle mode.  
Navigating the i-mode browser  
>
To  
Press  
i-menu (Menu 5.1)  
scroll through browser  
items  
[Up] or [Down].  
Use this menu to access the i-mode browser.  
You can also quickly launch the browser by  
pressing and holding [Centre] in Idle mode.  
select an item  
[Centre].  
[Left].  
return to the previous  
page  
63  
       
Menu functions  
Go to Internet: enter a URL address or  
select one from the Address history list.  
Saved Page List: access the list of the URL  
addresses you have saved.  
• Key operations on an i-mode screen depend  
on the screen contents at that time.  
• You can answer a call while using the i-mode  
feature. After ending the call, the display  
returns to the function screen you were using.  
Browser Settings: change the settings for  
the i-mode browser to suit your preferences.  
Using browser options  
p. 76  
From any web page, press <Options> to  
i-Menu: access the homepage of your  
access the following options:  
service provider.  
Add Bookmark: add a bookmark for the  
Home: return to the homepage.  
Reload: update the current page.  
Compose Mail: send the URL address of the  
current page via i-mail or MMS.  
Save in Contacts: save the selected phone  
number or e-mail address to Phonebook.  
Play Animation: play animations on the  
current page.  
current page.  
Save Page: save the URL address of the  
current page.  
Save Image: save images from the current  
page.  
Show Properties: access the properties for  
the i-mode browser.  
Bookmark List: access the bookmark list.  
Sound Effect: turn the sound effect on or  
off.  
64  
Attach File: add images, sounds, videos,  
name cards, or scheduled items.  
Exiting the i-mode browser  
To exit the browser at any time, press [ ].  
According to the Digital Rights  
Management (DRM) system, web content  
may not be able to be forwarded.  
i-mail (Menu 5.2)  
Use this menu to use i-mail and MMS message  
services. You can quickly access this menu by  
pressing <i-mail> in Idle mode.  
Attach Melody: add MFi (Melody Format  
for i-mode) melody files.  
Attach Bookmark: add URL addresses  
you have bookmarked.  
Compose i-mail (Menu 5.2.1)  
You can delete or preview the added items  
You can create and send a mail, attaching  
various types of media files.  
by selecting Delete Attach File or Play/  
Display File  
.
Creating and sending an i-mail  
6. Select the  
field.  
1. Select the  
2. Enter e-mail address and press [Centre].  
3. Select the field.  
4. Enter the mail title and press [Centre].  
5. Select the field and add files using  
following options:  
field.  
7. Enter the mail text and press [Centre].  
To insert pictograms into text, press  
<
Options> and select Pictogram  
You can use the copy and paste feature to  
quickly and easily enter text. next section  
.
8. When you have finished, select Send to send  
the mail.  
65  
   
Menu functions  
Copying and pasting text  
Using mail options  
While creating a mail, press <Options> access  
1. While entering text in a mail, place the  
cursor next to the text you want to copy.  
the following options:  
Send: send the mail.  
Save: save the mail in the Draft folder.  
Add Address: add destination numbers or  
addresses.  
2. Press <Options> and select Copy  
messages  
.
3. Press <Copy On>.  
4. Highlight the text as you want by pressing  
the Navigation keys and press [Centre].  
5. Select Copy to copy the highlighted text.  
You can also copy all text in the message by  
Address Menu: edit destination numbers or  
addresses. You can change the selected  
number or address to another, or change an  
address type (To, Cc, Bcc).  
selecting Copy all  
.
Attach File Menu: add media files, name  
6. Place the cursor where you want to paste the  
copied text.  
cards, scheduled items, or bookmarks.  
Attach Signature: attach your signature,  
7. Press <Options> and select Paste  
.
as specified in the Edit Signature option of  
Mail Settings  
.
Delete Body: delete the body of the mail.  
Delete Message: cancel composing the  
mail.  
66  
 
Media: add text, images, sounds, or  
videos.  
Compose MMS (Menu 5.2.2)  
Using Multimedia Message Service (MMS), you  
can send and receive MMS messages containing  
a combination of text, image, video, and audio,  
from phone to phone or from phone to e-mail.  
According to the Digital Rights  
Management (DRM) system, web content  
may not be able to be forwarded.  
Creating and sending an MMS message  
Fit mode: select the size in which the  
image displays:  
Hidden: the image displays in its actual  
size.  
Fill: the image is scaled to fit into the  
display area.  
Meet: the image is scaled so that the  
longer side, either the height or width, fits  
the corresponding side of the display  
area.  
1. Select the  
field.  
2. Enter a phone number or e-mail address and  
press [Centre].  
3. Select the  
field.  
4. Enter the message title and press [Centre].  
5. Select the SMIL field.  
6. Use the following options for creating an  
SMIL slide:  
Send: send the message.  
Save: save the message in the Draft  
folder.  
Preview: view the message as it will be  
shown on the recipient’s phone.  
67  
 
Menu functions  
Slice: the image is scaled so that the  
Slide: add or delete slides:  
shorter side, either the height or width,  
fits the corresponding side of the display  
area.  
Options: change the display time for  
each item in the message, such as a slide,  
text, image, or audio clip.  
Arrange Slide: customise slide settings:  
Text Color: select a colour for the  
message text.  
Background Color: select a colour for  
the slide background.  
Change Region Size: change the size of  
the image area. Press [Up] or [Down] to  
move the border line.  
Add: add a new slide after the currently  
selected slide. Once you have added  
slides, you can scroll between them by  
pressing [Left] or [Right].  
Insert: insert a new slide before the  
currently selected slide.  
Delete: delete the selected slide.  
Clear: clear the content of the selected  
slide.  
7. When you have finished, on the slide  
preview screen, press <Options> and select  
Send to send the message.  
Using message options  
While creating an MMS message, you can  
access a variety of options by pressing  
Swap Position: switch the order of the  
added image and text.  
<
Options>.p. 66  
68  
Reply: send a reply to the sender or all of  
the recipients of the message. You can also  
send a reply with the message included.  
Forward: forward the message to other  
people.  
Move: move the message to another folder.  
Delete: delete the message.  
Protect On/Off: protect the message from  
being deleted.  
Save in Contacts: save the sender’s  
address or phone number to Phonebook.  
Save Melody: save the MFi (Melody Format  
for i-mode) melody files attached to the  
message.  
Save Attached File: save the attached files  
in the phone’s memory.  
Copy: copy the message title or sender’s  
address. You can also copy the text of the  
mail.  
Inbox (Menu 5.2.3)  
Use this menu to access i-mails and MMS  
messages you have received.  
When the Inbox reaches its maximum limit, new  
i-mails or MMS messages will overwrite old  
messages that have already been read.  
Viewing a message  
1. Select a folder. The number next to a folder  
name indicates the number of unread  
messages.  
2. Select a message.  
3. Press [Left] or [Right] to scroll through  
slides.  
Using message options  
While viewing an i-mail or MMS message, press  
<Options> to access the following options:  
Play SMIL: play the SMIL slides of an MMS  
message automatically.  
69  
Menu functions  
Browse SMIL: play the SMIL slides of an  
MMS message manually. Press [Left] or  
[Right] to move to the next slide.  
Sent (Menu 5.2.4)  
Use this menu to access the i-mails and MMS  
messages you have sent.  
While viewing a message, press <Options> to  
access the following options:  
On the message list, press <Options> to  
access the following options:  
Move: move the selected message to  
another folder.  
Delete: delete the selected message.  
Selective Delete: delete the messages you  
select.  
Delete All: delete all messages.  
Protect On/Off: protect the message from  
being deleted.  
Sort: sort messages by title, address, or  
date.  
Filter: set messages to be displayed by the  
selected filter.  
Export: save the selected message in the  
Edit: edit the message and then send it.  
Delete: delete the current message.  
Protect On/Off: protect the message from  
being deleted.  
Save in Contacts: save the sender’s  
address or phone number to Phonebook.  
Copy: copy the message’s title or sender’s  
address.  
Play SMIL: play the SMIL slides of an MMS  
message.  
Browse SMIL: play the SMIL slides of an  
MMS message manually. Press [Left] or  
[Right] to move to the next slide.  
phone’s memory. The message is saved in  
the My vMessages folder.  
p. 82  
70  
On the message list, press <Options> to  
access the following options:  
Draft (Menu 5.2.5)  
Use this menu to access i-mails and MMS  
messages you have saved or failed to send.  
When you select a message in the Draft folder,  
the message opens in Edit mode so that you  
can edit and send the message.  
Edit: edit the message.  
Delete: delete the selected message.  
Selective Delete: delete the messages you  
select.  
Delete all: delete all messages.  
Protect On/Off: protect the message from  
Check New Mail (Menu 5.2.6)  
being deleted.  
Sort: sort messages by title, address, or  
date.  
Use this menu to check the i-mode server for  
new i-mails and MMS messages and then  
retrieve them to the phone.  
Filter: set messages to be displayed by the  
Mail Settings (Menu 5.2.7)  
selected filter.  
Use this menu to change the various settings  
for sending and receiving i-mails and MMS  
messages.  
Export: save the selected message in the  
phone’s memory. The message is saved in  
the My vMessages folder.  
p. 82  
Communication: change the settings for  
sending or receiving messages:  
71  
Menu functions  
Auto Receive: set the phone to retrieve  
new messages from the i-mail server as  
soon as they arrive at the server.  
List Display: select the number of lines and  
the type of information, for example, subject  
or address, to be displayed on the list.  
Receive Attach File: select the types of  
attachments you want to receive.  
Folder Security: locks message folders to  
protect them from unauthorised viewing.  
Edit: edit your signature or a quotation of  
your messages:  
Auto Play: set a sound, video, or SMIL slide  
to be automatically played when you open a  
message.  
Pasted Data: set MFi (Melody Format for  
i-mode) melody files or links to java  
resources to be inserted when you are  
creating a message. The added data,  
however, will be sent as a data format  
attachment.  
Check Settings: check your current mail  
settings.  
Reset Settings: restore the default  
settings.  
Edit Signature: enter a tag line to be  
inserted at the end of your message. If you  
select Auto Attach, the signature will be  
automatically attached to all of your  
outgoing messages.  
Edit Quotation: enter characters or words  
to be inserted at the start of your original  
mail when you reply to or forward a  
message.  
View: change the view settings:  
Screen Scroll: select the number of lines a  
message displays.  
Font Size: select a font size to be used for  
displaying messages.  
Check Storage: check the total amount of  
memory and the amount of memory  
currently in use in each message folder.  
72  
Properties: access the Java application  
properties.  
Certificate: access the Java application  
certificate.  
Java (Menu 5.3)  
Use this menu to download and play games and  
Java applications from various sources using  
the i-mode browser.  
On the Java application list, press <Options  
to access the following Java system options:  
Network Setting: select whether or not the  
Java application connects to the network  
when it runs, if the selected one is an online  
application.  
Java Setting: set whether or not the  
selected Java application accesses the  
website to run. This option is available only  
when the LaunchByBrowser key or the  
AllowPushBy key is present in the ADF.  
Icon Info Setting: set whether or not your  
phone operates the selected Java application  
using phone system information. This option  
is available only when the GetSysInfo key is  
present in the ADF.  
>
Create New Folder: create a folder.  
Delete Folder: delete the selected folder.  
Rename Folder: change the name of the  
folder.  
Move To Folder: move the selected Java  
application to another folder.  
Upgrade: update the selected Java  
application.  
Delete: delete the selected Java application.  
Delete All: delete all Java applications.  
Sort: sort Java applications by name, time,  
used memory.  
73  
   
Menu functions  
AutoStart Setting: select whether or not  
the Java application launches automatically  
when selected.  
Show Desc Setting: set whether or not the  
description of a Java application is displayed  
before downloading.  
AutoStart Failure: set whether or not the  
Java application launches automatically after  
the launch fails.  
Trace Info: access trace information for a  
Java application.  
System Info: access system information for  
a Java application.  
Bookmarks (Menu 5.5)  
Use this menu to access URL addresses of  
websites you have bookmarked while  
navigating the wireless web.  
Press <Options> to access the following  
options:  
Go To: go to the bookmarked page.  
Title: edit the title of the bookmark.  
Delete: delete the selected bookmark.  
Selective Delete: delete the messages you  
select.  
Delete All: delete all bookmarks.  
Show Address: display URL addresses you  
have bookmarked.  
SMS (Menu 5.4)  
Copy Address: copy the URL address of the  
bookmark.  
Compose i-mail: send the bookmark via  
i-mail or MMS.  
Use this menu to create and send text  
messages.p. 57  
74  
   
Certificates: access the server certificate.  
Play Animation: play animations on the  
current page.  
Sound Effect: turn the sound effect on or  
off.  
Go to internet (Menu 5.6)  
Use this menu to access a specific website by  
manually entering a URL address or selecting  
one from the Address history list.  
Edit Title: change the title of the page.  
Delete: delete the page.  
Protect On/Off: protect the page from  
being deleted.  
Saved Pages (Menu 5.7)  
Use this menu to access the web pages you  
have saved.  
While viewing a web page, press <Options> to  
From the web page list, press <Options> to  
access the following options:  
access the following options:  
Save Image: save images from the current  
Show: open the selected page.  
Edit Title: change the title of the selected  
page.  
page.  
Show Properties: access various page and  
server properties:  
Delete: delete the selected page.  
Selective Delete: delete the messages you  
select.  
Address: display the URL address of the  
current page.  
Page Properties: access the properties of  
the current page.  
Delete All: delete all saved pages.  
75  
   
Menu functions  
Show Address: display the address of the  
web page.  
Protect On/Off: protect the page from  
being deleted.  
CSS: set whether or not the phone uses a  
style sheet for presenting documents on a  
web page.  
Screen Scroll: select the number of lines  
the web page displays.  
Certificates: view the list of server  
certificates you have received while  
navigating the wireless web, or switch the  
selected certificate from valid to invalid, or  
vice versa.  
Browser Settings (Menu 5.8)  
Use this menu to change the settings for the  
i-mode browser to suit your preferences.  
Home: enable or disable the homepage of  
the i-mode browser.  
Others: change other settings:  
View: change the view settings for text and  
display on web pages:  
Connection Timeout: set the phone to  
disconnect from the network after a specified  
length of time of inactivity.  
Send Terminal Info: set whether or not  
the phone sends its information to the web  
server while navigating the wireless web.  
Font Size: select a font size to be used for  
displaying text on web pages.  
Images: set whether or not the phone  
displays images on web pages.  
Table Layout: select a layout for the web  
page.  
Auto Play: set whether or not the phone  
automatically plays videos after  
downloading.  
76  
   
Sound Effect: turn the sound effect on or  
off.  
According to the Digital Rights Management  
(DRM) system, web content may not be able to  
Storage Device: select the default memory  
location, phone or memory card, for  
downloaded files.  
be forwarded. They are indicated by  
.
Images (Menu 6.1)  
Check Settings: check your current  
This menu displays photos you have taken and  
images you have downloaded, received in  
messages, or imported from your computer.  
You can also store SWF (flash animation) files  
you have downloaded from the i-mode browser.  
settings.  
Reset Settings: restore the default  
settings.  
My files (Menu 6)  
You cannot move or copy SWF files stored here  
to another folder or a memory card, and cannot  
send or receive them to/from other people.  
The My files menu allows you to access  
images, videos, music files, and sound files  
stored in the phone’s memory or on a memory  
card. You can also store decorative photo  
frames downloaded from the i-mode browser  
and i-mode messages downloaded from the i-  
mode server.  
Viewing an image  
1. Select an image folder.  
2. Select an image.  
To access this menu, press [Centre] in Idle  
mode and select My files  
.
77  
     
Menu functions  
Edit: edit the image using the Image editor,  
Viewing a slide show  
if it is a photo taken by the camera on the  
You can view your photos as a slide show, a  
sequential presentation of each photo in the  
current folder.  
phone.  
p. 51  
Delete: delete the selected file.  
Rename: change the file name.  
Move to: move the file to another folder or  
to a memory card.  
Copy to memory card: copy the file to a  
memory card.  
Bluetooth visibility: share the file or all  
files with other Bluetooth devices.  
Protection: lock the file to protect it from  
being deleted, or unlock the file.  
Print via Bluetooth: print the file by  
connecting the phone to a printer via  
Bluetooth. Some printers may not be  
compatible with the phone.  
1. Select My photos  
.
2. Press <Options> and select Slide show  
3. Select an interval option.  
The slide show begins.  
.
4. Press <Stop> to stop the slide show.  
Using image options  
While viewing an image, press <Options> to  
access the following options:  
List: return to the image list.  
Send via: send the file via i-mail, MMS, or  
Bluetooth.  
Set as: set the file as wallpaper for the  
displays or as a caller ID image for a  
Phonebook entry.  
Details: access the file properties.  
78  
Videos (Menu 6.2)  
Key  
/
Function  
This menu displays video clips you have  
recorded, downloaded, received in messages,  
or imported from your computer.  
Adjusts the volume.  
Stops playback.  
Down  
Video clips recorded on other devices, such as  
camcorders, may not play correctly.  
Using video options  
After playback, press <Options> to access the  
following options. Depending on the folder,  
some options may vary:  
Playing a video clip  
1. Select a video folder.  
2. Select a video clip.  
During playback, use the following keys:  
List: return to the video list.  
Send via: send the file via i-mail, MMS, or  
Bluetooth.  
Add to playlist: add files to the play list.  
Key  
Function  
Set as: set the file as your ringtone, as a  
caller ID image for a Phonebook entry, or as  
wallpaper for the main display.  
Centre  
Left  
Pauses or resumes playback.  
Returns to the previous file. Moves  
backward in a file when held down.  
To set a video clip as a ringtone, the video  
clip must be recorded with audio.  
To set a video clip as wallpaper, the video  
clip must be saved in 3gp format.  
Right  
Skips to the next file. Skips  
forward in a file when held down.  
79  
   
Menu functions  
Delete: delete the selected file.  
Rename: change the file name.  
Move to: move the file to another folder or  
to a memory card.  
Copy to memory card: copy the file to a  
memory card.  
Bluetooth visibility: share the file or all  
files with other Bluetooth devices.  
Sounds (Menu 6.4)  
This menu displays voice memos you have  
recorded, and sound files you have  
downloaded, received in messages, or imported  
from your computer. You can also store MFi  
(Melody Format for i-mode) melody files you  
have downloaded from the i-mode browser.  
Playing a sound clip  
Protection: lock the file to protect it from  
being deleted, or unlock the file.  
Details: access the file properties.  
1. Select a sound folder.  
2. Select a sound clip. For a voice memo, see  
Voice recorder  
.p. 50  
Music (Menu 6.3)  
Using sound options  
This menu displays music files you have  
downloaded or imported from your computer.  
Select a file. The media player opens.  
While playing a sound clip, press <Options> to  
access the following options:  
List: return to the sound list.  
Send via: send the file via i-mail, MMS, or  
p. 47  
Bluetooth.  
80  
     
Set as: set the file as your ringtone or as a  
ringtone for a Phonebook entry.  
Delete: delete the selected file.  
Rename: change the file name.  
Move to: move the file to another folder or  
to a memory card.  
Copy to memory card: copy the file to a  
memory card, if you use.  
Bluetooth visibility: share the file or all  
files with other Bluetooth devices.  
Protection: lock the file to protect it from  
being deleted, or unlock the file.  
Taking a photo with a frame  
1. Select a frame.  
2. Press <Options> and select Take photo to  
turn on the camera.  
3. Press [ ] to take a photo. The photo is  
saved in the My photos folder.  
Using frame options  
From the frame list, press <Options> to access  
the following options:  
View: display the frame.  
Take photo: take a photo with the selected  
frame.  
Details: access the file properties.  
Delete: delete the selected file or all files.  
Rename: change the file name.  
Move to memory card: move the file to a  
memory card, if you use.  
Copy to memory card: copy the file to a  
memory card, if you use.  
Frame (Menu 6.5)  
This menu displays decorative photo frames  
you have downloaded from the i-mode browser.  
You can also take a photo with one of the  
downloaded frames.  
81  
 
Menu functions  
Protection: lock the file to protect it from  
being deleted, or unlock the file.  
Details: access the file properties.  
Move to memory card: move the message  
to a memory card.  
Copy to memory card: copy the message  
to a memory card.  
Bluetooth visibility: share the message or  
all messages with other Bluetooth devices.  
Protection: lock the message to protect it  
from being deleted, or unlock the message.  
My vMessages (Menu 6.6)  
This menu displays i-mails or MMS messages  
you have saved from the i-mode server to the  
phone’s memory.  
Details: access the message properties.  
Using i-mode message options  
Other files (Menu 6.7)  
From the message list, press <Options> to  
access the following options:  
Use this menu to view various document files  
and files stored in the phone’s memory without  
corruption. Available file formats are *.doc,  
*.xls, *.ppt, *.pdf, *.txt, *.htm, and *.html.  
Import: retrieve the selected message from  
the i-mode server and open it.  
Send via Bluetooth: send the message via  
Bluetooth.  
Delete: delete the selected message or all  
messages.  
Rename: change the message name.  
Viewing a file  
Select a file. Picsel File Viewer runs to open the  
document.  
82  
     
• Depending on the file size or memory capacity  
of Picsel File Viewer, a file may not open  
properly.  
• If a document file contains languages  
unsupported by Picsel File Viewer, the content  
of the document will not display correctly.  
Key  
5
Function  
Rotates the document.  
Moves to the next page.  
Moves to the last page.  
6
8
Use the following keys to view the document:  
Changes the display to Full  
screen view or Normal screen  
view.  
Key  
Function  
Up/Down/  
Left/Right  
Pans around the page.  
Using document options  
While viewing a document, press <Options> or  
/
1
Zooms in.  
<
> to access the following options:  
Full screen view Normal view: change  
/
3
Zooms out.  
/
the display to Full screen view or to Normal  
screen view.  
Zoom: zoom in or out.  
Fit to: fit the document to the page size,  
screen width, or screen height.  
Centre  
Fits the document to the page  
size.  
2
4
Returns to the first page.  
Returns to the previous page.  
83  
Menu functions  
Go to: move to another page of the  
document.  
Protection: lock the file to protect it from  
being deleted, or unlock the file.  
Rotate: rotate the document.  
Details: access the file properties.  
Shortcuts: view the functions of the keys  
you can use in Picsel File Viewer.  
Screen panning  
/Normal panning: change  
the panning mode to by screen or by preset  
pixel.  
Memory card (Menu 6.8)  
Hide controller/Show controller: hide or  
display the shortcut tool bar in Full screen  
view.  
Send via bluetooth: send the file via  
Bluetooth.  
Move to memory card: move the file to a  
memory card.  
Copy to memory card: copy the file to a  
memory card.  
Use this menu to access the files stored in a  
memory card. This menu is shown only when a  
memory card is inserted into the phone.  
Your phone is preset to use FAT16-formatted  
memory cards. If you insert a FAT32-formatted  
memory card, the phone will ask you to  
reformat the memory card. If you do not, you  
will not be able to access the card from the  
phone.  
Delete: delete the selected file.  
Rename: change the file name.  
Bluetooth visibility: share the file or all  
files with other Bluetooth devices.  
84  
 
Press [Left] or [Right] to move by day.  
Press [Up] or [Down] to move by week.  
Press [ / ] to move by month.  
Memory status (Menu 6.9)  
Use this menu to view memory information for  
media items in the phone’s memory or on a  
memory card. For the phone’s memory, press  
[Left] or [Right] to view the memory status by  
size or number of items.  
Creating an item  
You can store appointments, anniversaries,  
memos, and tasks on the calendar. More than  
one item per day can be stored.  
Calendar (Menu 7)  
Entering an appointment  
The Calendar menu enables you to keep track  
of your schedule.  
1. Select a date on the calendar.  
To access this menu, press [Centre] in Idle  
2. Press <Options> and select Create  
Appointment  
3. Enter information or change the settings:  
mode and select Calendar  
.
.
Selecting a day on the calendar  
Subject: enter a title for the  
appointment.  
When you enter the Calendar menu, the  
calendar in Month view appears with today’s  
date indicated by a coloured box.  
Details: enter the appointment details.  
85  
     
Menu functions  
Start date and Start time: enter the  
starting date and time for the  
appointment.  
AM/PM: select AM or PM in 12-hour  
time format.  
End date and End time: enter the  
ending date and time for the  
appointment.  
AM/PM: select AM or PM in 12-hour  
time format.  
Location: enter information about the  
appointment location.  
Alarm: set an alarm for the appointment.  
Before: set how long before the  
appointment the alarm is to alert you.  
Alarm tone: select an alarm tone.  
Repeat: set the appointment to recur  
and select a repeat option.  
Entering an anniversary  
1. Select a date on the calendar.  
2. Press <Options> and select Create  
Anniversary  
.
3. Enter information or change the settings:  
Occasion: enter information about the  
anniversary.  
Date: enter the date.  
Alarm: select to set an alarm for the  
anniversary.  
Before: set how long before the  
anniversary the alarm is to alert you.  
Alarm time: enter the time for the alarm  
to sound.  
AM/PM: select AM or PM in 12-hour  
time format.  
Alarm tone: select an alarm tone.  
Repeat every year: set the phone to  
remind you of the anniversary every year.  
Until: set the ending date, if the  
appointment will recur.  
4. Press <Save> to save the anniversary.  
4. Press <Save> to save the appointment.  
86  
Entering a memo  
Consulting the calendar  
1. Select a date on the calendar.  
Once you have created items, the item icons  
and the number of items for a specific day  
appear at the bottom of the calendar.  
2. Press <Options> and select Create  
Memo  
.
3. Enter a memo and press [Centre].  
Appointment  
Anniversary  
Memo  
Task  
Festival  
Entering a task  
1. Select a date on the calendar.  
2. Press <Options> and select Create  
Task  
.
Viewing an item  
3. Enter information or change the settings:  
Task: enter information about the task.  
Start date: enter the starting date.  
Due date: enter the ending date.  
Select priority: select a priority level.  
1. Select a date on the calendar to display the  
items for the day.  
2. Select an item to view its details.  
3. Press [Left] or [Right] to access the other  
items scheduled for the selected day.  
4. Press <Save> to save the task.  
While viewing an item, press <Options> to  
access the following options:  
87  
Menu functions  
Edit: edit the item.  
Create: add a new item.  
Send via: send the item via SMS, i-mail,  
MMS, or Bluetooth.  
Go to: go to today’s date or enter the  
specific date you want to access.  
Event list: sort items by type of item.  
Delete: delete the items stored on the  
calendar by using various deleting options.  
View by: change the view mode of the  
calendar.  
You can delete recurring events in Day view  
only.  
Delete: delete the item.  
Memory status: access memory  
information for the items stored on the  
calendar.  
Missed alarm events: view items whose  
alarms you have missed.  
Memory status: access memory  
information for the items stored on the  
calendar.  
Using calendar options  
On the calendar, press <Options> to access  
the following options:  
Viewing items in a different mode  
View by: change the view mode of the  
calendar. next section  
Create: add a new item.  
You can change the calendar display to Day  
p. 85  
view or Week view. Press <Options> and  
select View by  
a view mode.  
88  
Day view  
Camera (Menu 8)  
You can view items for the selected date. Select  
an item to view its details.  
You can use the camera module embedded in  
your phone to take photos and record videos.  
The following icons may display to indicate the  
item status:  
To access this menu, press [Centre] in Idle  
mode and select Camera, or press and hold  
Alarm set  
Recurring item  
To do item priority (Red: high,  
Blue: normal, Grey: low)  
[
].  
• Do not take photos of people without their  
permission.  
• Do not take photos in a place where cameras  
are not allowed.  
• Do not take photos in a place where you may  
interfere with another person’s privacy.  
Completed task  
Week view  
You can view items for the selected week. A cell  
on the timetable indicates the presence of item  
information. Select a cell in the day you want.  
Taking a photo  
You can take photos in various modes. The  
camera produces JPEG photos.  
When you take a photo in direct sunlight or in  
bright conditions, shadows may appear on the  
photo.  
89  
   
Menu functions  
Taking a photo with the phone open  
Using camera options in Capture mode  
1. Access the Camera menu or press and hold  
In Capture mode, press  
following options:  
<
> to access the  
[
] to turn on the camera.  
Record video: switch to Record mode.  
Settings: change the default settings for  
taking a photo:  
2. Make any desired adjustments.  
Press <  
> to access camera options.  
next section  
Use the keypad to change the camera  
settings or switch to other modes.  
Size: select an image size.  
Quality: select an image quality setting.  
Viewfinder: select a preview screen.  
Scene programs: set whether or not to use  
Night shot mode.  
p. 91  
3. Press [Centre] or [ ] to take a photo. The  
photo is saved in the My photos folder.  
Shutter sound: select the sound that you  
To  
Press  
<Options>.  
4.  
hear when you press the shutter release key.  
Zoom sound: turn the sound effect for  
zooming on or off.  
Brightness sound: turn the sound effect  
for brightness adjustment on or off.  
access photo options  
p. 92  
return to Capture mode <Preview>.  
White balance: adjust the colour balance of  
the image. You can make your photo appear  
warmer or cooler.  
send the photo by  
i-mail or MMS  
[Centre].  
p. 65, p. 67  
90  
ISO: change the ISO setting, which controls  
the sensitivity of your camera. For low light  
situations, select a higher ISO number. The  
higher the ISO number, the faster the  
camera shutter functions and the more  
sensitive the camera is to light. Higher ISO  
settings may bring some distortion to an  
image.  
Timer: set a time delay before the camera  
takes a photo.  
Frames: apply a decorative frame.  
Go to My photos: access the My photos  
folder.  
Camera shortcuts: view the functions of  
the keys you can use in Capture mode.  
Shooting mode: take a photo in the  
Using the keypad in Capture mode  
following modes:  
You can use the keypad to customise your  
camera settings in Capture mode.  
Single shot: take a photo in normal mode.  
You can select whether or not the camera  
automatically saves a photo.  
Key  
Function  
Multi-shot: take a series of action stills. You  
can select the number of photos the camera  
will take and the shooting speed.  
Left/Right  
Up/Down  
Adjusts the brightness.  
Zooms in or out.  
Mosaic shot: take several stills and save  
them in one frame. You can select the  
layout.  
Effects: change the colour tone or apply a  
special effect.  
Flips the image vertically.  
Shows the mirror image.  
91  
 
Menu functions  
Key  
1
Function  
Key  
Function  
Switches to Record mode.  
Sets whether or not to use  
Night scene mode.  
p. 93  
2
3
4
5
Changes the image size.  
Changes the image quality.  
Changes the shooting mode.  
Changes the preview screen.  
Using photo options  
After saving a photo, press <Options> to  
access the following options:  
View: access one of the multi-shot photos.  
Viewfinder: return to Capture mode.  
Changes the colour tone or  
applies a special effect.  
6
7
8
9
0
Changes the white balance.  
Selects a decorative frame.  
Sets the timer.  
Send via: send the file via i-mail, MMS, or  
Bluetooth.  
Set as: set the photo as wallpaper for the  
displays or as a caller ID image for a  
Phonebook entry.  
Changes the ISO setting.  
Goes to the My photos folder.  
Edit: edit the photo using the Image editor.  
p. 51  
Delete: delete the file.  
92  
 
Rename: change the file name.  
To  
Press  
].  
2.  
Go to My photos: access the My photos  
zoom in or out  
[
folder.p. 77  
Protection: lock the file to protect it from  
being deleted, or unlock the file.  
Print via Bluetooth: print the file by  
connecting the phone to a printer via  
Bluetooth. Some printers may not be  
compatible with the phone.  
3. Press [ ] to take a photo. The photo is  
automatically saved.  
Recording a video  
You can record a video of what is displayed on  
the camera screen and save it.  
Details: access the file properties.  
Taking a photo with the phone closed  
Recording a video with the phone open  
1. Press and hold [ ].  
1. In Capture mode, press [  
1].  
2. Make any desired adjustments.  
To  
Press  
].  
2.  
Press  
next section  
Use the keypad to change the camera  
settings. p. 95  
3. Press [Centre] or [ ] to start recording.  
<
> to access camera options.  
flip the image vertically  
show the mirror image  
adjust the brightness  
[
[ ].  
[
].  
93  
 
Menu functions  
4. Press [Centre], < >, or [ ] to stop  
recording. The video is automatically saved  
in the My video clips folder.  
Select Limit for MMS/Wallpaper to record  
a video suitable for an i-mail or MMS  
message or for setting as wallpaper. The  
video clip is saved in 3gp format.  
Select Normal to record a video within the  
limit of the currently available memory. The  
video clip is saved in mp4 format.  
Size: select a frame size.  
Quality: select an image quality setting.  
Viewfinder: select a preview screen.  
Record audio: record audio with a video  
clip.  
Zoom sound: turn the sound effect for  
zooming on or off.  
Brightness sound: turn the sound effect  
for brightness adjustment on or off.  
White balance: adjust the colour balance of  
the image. You can make your video appear  
warmer or cooler.  
To  
Press  
5.  
play back the video clip  
access video options  
[Centre].  
<
Options>.  
p. 96  
return to Record mode  
<Preview>.  
Using camera options in Record mode  
In Record mode, press  
following options:  
<
> to access the  
Take photo: switch to Capture mode.  
Settings: change the following settings for  
recording a video:  
Recording mode: select a video recording  
mode.  
94  
Effects: change the colour tone or apply a  
special effect.  
Timer: set a time delay before the camera  
starts recording.  
Go to My video clips: access the My video  
clips folder.  
Camcorder shortcuts: view the functions  
of the keys you can use in Record mode.  
Key  
1
Function  
Switches to Capture mode.  
p. 89  
2
3
4
Changes the frame size.  
Changes the image quality.  
Changes the video recording  
mode.  
Using the keypad in Record mode  
5
Changes the colour tone or  
applies a special effect.  
You can use the keypad to customise your  
camera settings in Record mode.  
6
7
8
9
Changes the white balance.  
Mutes or unmutes audio.  
Sets the timer.  
Key  
Function  
Left/Right  
Up/Down  
Adjusts the brightness.  
Zooms in or out.  
Goes to the My video clips  
folder.  
Flips the image vertically.  
Shows the mirror image.  
Changes the preview screen.  
95  
 
Menu functions  
Using video options  
Recording a video with the phone  
closed  
After saving a video clip, press <Options> to  
access the following options:  
1. Press and hold [ ].  
Viewfinder: return to Record mode.  
Send via: send the file via i-mail, MMS, or  
Bluetooth.  
Set as: set the file as your ringtone, as a  
caller ID image for a Phonebook entry, or as  
wallpaper for the main display.  
2. Press and hold [  
mode.  
] to switch to Record  
To  
Press  
3.  
flip the image vertically  
show the mirror image  
adjust the brightness  
zoom in or out  
[
].  
[ ].  
Delete: delete the file.  
Rename: change the file name.  
Go to My video clips: access the My video  
[
[
].  
].  
clips folder.p. 79  
Protection: lock the file to protect it from  
4. Press [ ] to start recording.  
5. Press [ ] to stop recording. The video clip  
is automatically saved.  
being deleted, or unlock the file.  
Details: access the file properties.  
96  
 
Calendar starting day: set which day of  
the week the calendar starts with.  
Settings (Menu 9)  
The Settings menu provides you with various  
setting options to customise the phone to your  
preferences and needs. You can also reset the  
settings to their default status.  
To access this menu, press [Centre] in Idle  
mode and select Settings  
Auto update: activate the auto time update  
feature. Your phone will read the MCC(Mobile  
Country Code) from the network and  
automatically update the current time for the  
country that you are in when you travel  
abroad.  
.
Time information may not be updated when  
you move to one time zone to another within  
a country.  
Time and date (Menu 9.1)  
Use this menu to change the time and date  
displayed on your phone. Before setting the  
time and date, specify your time zone in the  
Phone settings (Menu 9.2)  
World clock menu.  
p. 55  
Many different features of your phone’s system  
can be customised to suit your preferences.  
Set time: enter the current time.  
AM/PM: select AM or PM in 12-hour time  
format.  
Language (Menu 9.2.1)  
Time format: select a time format.  
Set date: enter the current date.  
Date format: select a date format.  
Use this menu to select a language for the  
display text.  
97  
     
Menu functions  
Remove all: deactivate all shortcut  
assignments.  
Greeting message (Menu 9.2.2)  
Use this menu to enter the greeting that is  
displayed briefly when the phone is switched  
on.  
Volume key (Menu 9.2.4)  
Use this menu to set whether the phone mutes  
the call ringer or rejects a call if you press and  
hold [ / ] when a call comes in.  
Shortcuts (Menu 9.2.3)  
You can use the Navigation keys as shortcuts to  
access specific menus directly from Idle mode.  
Use this menu to assign a shortcut to a key.  
Extra settings (Menu 9.2.5)  
You can turn the automatic redialling or  
answering feature on or off, and lock the  
external keys.  
Assigning a shortcut menu  
1. Select a key to be used as a shortcut key.  
2. Select a menu to be assigned to the key.  
Auto redial: set the phone to make up to  
ten attempts to redial a phone number after  
an unsuccessful call.  
Active folder: answer an incoming call by  
opening the phone.  
Using shortcut options  
Press <Options> to access the following  
options:  
Change: assign or change a shortcut menu.  
Remove: deactivate the shortcut  
assignment to the selected key.  
Anykey answer: answer an incoming call  
by pressing any key, except for [ ] and  
<Reject>.  
98  
       
Cover keypad lock: lock the exposed keys  
to keep accidental presses from affecting  
your phone’s operation when the phone is  
closed.  
Text colour: select a font colour.  
Graphic logo: set the phone to display a  
graphic icon instead of the service provider’s  
logo on the idle screen. This is only available  
if a graphic icon has been received in a  
message.  
Display settings (Menu 9.3)  
Use this menu to change settings for the display  
and backlight.  
Skin (Menu 9.3.2)  
You can select a skin colour pattern for Menu  
mode.  
Wallpaper (Menu 9.3.1)  
You can set up the idle screen on both displays.  
Brightness (Menu 9.3.3)  
Main display: select an image or video clip  
You can adjust the brightness of the main  
display for varying lighting conditions.  
to be displayed on the main display.  
Cover display: select an image to be  
displayed on the external display.  
Text position: select a text position. If you  
do not want to display text in Idle mode,  
Dialling display (Menu 9.3.4)  
Use this menu to select a font colour for the  
numbers entered while dialling.  
select Off  
.
Text mode: select a font style.  
99  
 
Menu functions  
Volume: select a ringtone volume.  
Alert type: specify how you are to be  
informed of incoming calls.  
Show caller information (Menu 9.3.5)  
Use this menu to set the phone to display  
missed call notifications with the most recently  
missed caller’s information. To set the external  
display to show caller information, select Show  
Keypad tone (Menu 9.4.2)  
Use this menu to select the tone that the phone  
sounds when you press a key.  
on cover display  
.
TV-out settings (Menu 9.3.6)  
You can adjust the key tone volume using  
Use this menu to select the video system for a  
TV.  
[
/
] in Idle mode.  
Message tone (Menu 9.4.3)  
Sound settings (Menu 9.4)  
Use this menu to change the sound settings for  
incoming SMS messages, i-mails, MMS  
messages, and broadcast messages  
individually.  
Use this menu to customise various sound  
settings.  
Incoming call (Menu 9.4.1)  
Tone: select one of several message tones.  
Alert type: specify how you are to be  
informed when a message comes in.  
Use this menu to change the sound settings for  
incoming calls.  
Repetition: specify how often the phone  
informs you of a new message.  
Ringtone: select a ringtone to be used for  
the call ringer.  
100  
   
Power on/off (Menu 9.4.4)  
Extra tones (Menu 9.4.8)  
Use this menu to select the melody that the  
phone sounds when it is switched on or off.  
Use this menu to customise additional tones for  
the phone.  
Minute minder: set the phone to beep  
every minute during an outgoing call to keep  
you informed of the length of your call.  
Connection tone: set the phone to beep  
when an outgoing call is connected to the  
system.  
Alerts on call: set the phone to beep when  
you receive a new message or when the time  
for an alarm comes during a call.  
Folder tone (Menu 9.4.5)  
Use this menu to select the tone that the phone  
sounds when you open or close the phone.  
Time alert (Menu 9.4.6)  
Use this menu to set the time alert.  
Periodic: you can set the phone to sound an  
alert every hour on the hour.  
Current: you can set the phone to state the  
current time by pressing and holding [ ] in  
Idle mode when the phone is closed.  
Indicative tone: set the phone to beep  
when a pop-up window displays.  
Light settings (Menu 9.5)  
Quiet mode (Menu 9.4.7)  
Use this menu to change the settings for the  
light.  
Use this menu to set how the phone acts to  
alert you to a specific event while in Quiet  
mode.  
101  
 
Menu functions  
Custom time: you can specify the time  
period that the keypad light is used.  
Backlight time (Menu 9.5.1)  
You can change the settings for backlight and  
icons.  
Network services (Menu 9.6)  
Main display normal: select the length of  
time the backlight stays on.  
Use this menu to access network services.  
Please contact your service provider to check  
their availability and subscribe to them, if you  
wish.  
Main display dim: select the length of time  
the display stays on in Dim mode after the  
backlight turns off. After a specified time,  
the display turns off.  
Show cover indicators: set whether or not  
the cover display icons are shown on the  
external display.  
Call diverting (Menu 9.6.1)  
This network service reroutes incoming calls to  
a phone number that you specify.  
1. Select a call diverting option:  
Keypad light (Menu 9.5.2)  
Divert always: divert all calls.  
Busy: divert calls when you are on  
another call.  
Use this menu to set how the phone controls  
the use of the keypad light. Select one of the  
following options in the Use at line:  
No reply: divert calls when you do not  
answer the phone.  
Any time: the keypad light is always used.  
Night time: the keypad light is used only  
between 5:00 PM and 9:00 AM.  
102  
 
Unreachable: divert calls when you are  
not in an area covered by your service  
provider or when your phone is switched  
off.  
Cancel all: cancel all call diverting  
options.  
Call barring (Menu 9.6.2)  
This network service allows you to restrict your  
calls.  
1. Select a call barring option:  
All outgoing calls: prohibit all outgoing  
calls.  
2. Select the type of calls to be diverted.  
3. Select Activate. To deactivate call diverting,  
select Deactivate  
4. Move to the Divert to line.  
5. Enter the number to which calls are to be  
diverted.  
International: prohibit international  
calls.  
International except home: only allow  
calls to numbers within the current  
country when you are abroad, and to your  
home country.  
.
All incoming calls: prohibit incoming  
calls.  
Incoming while abroad: prohibit  
incoming calls when you use your phone  
outside of your home country.  
6. If you selected No reply, move to the  
Seconds line and select the length of time  
the network delays before diverting a call.  
7. Press <Select>.  
103  
Menu functions  
Cancel all: cancel all call barring  
settings, allowing calls to be sent and  
received normally.  
Change barring password: change the  
call barring password obtained from your  
service provider.  
Network selection (Menu 9.6.4)  
This network service allows you to either  
automatically or manually select the network to  
be used while roaming outside of your home  
area. You can select a network other than your  
home network only if there is a valid roaming  
agreement between the two.  
2. Select the type of calls to be barred.  
3. Select Activate. To deactivate call barring,  
Caller ID (Menu 9.6.5)  
select Deactivate  
.
This network service allows you to hide your  
phone number from the person you are calling.  
If you select Default, the phone will use the  
default setting provided by the network.  
4. Enter the call barring password supplied by  
your service provider and press <Select>.  
Call waiting (Menu 9.6.3)  
This network service informs you when  
someone is trying to reach you while you are on  
another call.  
Some networks may not allow you to change  
this setting.  
Voice mail server (Menu 9.6.6)  
1. Select the type of calls to which call waiting  
option will apply.  
Use this menu to store the number of the  
voicemail server and access your voicemails.  
2. Select Activate. To deactivate call waiting,  
select Deactivate  
.
104  
 
Default group: enable the default CUG, if  
you have set one with your service provider.  
When making a call, you are given the option  
of using your default CUG, instead of  
selecting one from the list.  
You must store the voicemail server number  
before accessing the server. Your service  
provider can give you the number.  
Connect to voice server: connect to the  
voicemail server to listen to your voicemails.  
Voice server number: change the  
voicemail server number.  
Bluetooth (Menu 9.7)  
Using the Bluetooth feature, you can connect  
the phone wirelessly to other Bluetooth devices  
and exchange data with them, talk hands-free,  
or control the phone remotely.  
Bluetooth technology allows free wireless  
connections between all Bluetooth-compliant  
devices within a range of 10 metres. Since the  
devices communicate using radio waves, they  
do not need to be in line of sight to each other.  
Closed user group (Menu 9.6.7)  
Use this menu to set incoming and outgoing  
calls to be restricted to a selected user group.  
For details about how to create a closed user  
group (CUG), contact your service provider.  
Index list: add, delete, or activate CUG  
index numbers.  
Outside access: enable calls to numbers  
other than those in the closed user group.  
This feature depends on the nature of your  
CUG subscription.  
105  
   
Menu functions  
My phone’s name: assign a Bluetooth  
device name to your phone, which is then  
displayed on other devices.  
Secure mode: determine if the phone asks  
for your confirmation when other devices  
access your data.  
• If there are obstacles between the devices,  
the operating distance may be reduced.  
• It is recommended that you do not use the  
Bluetooth feature while using multimedia  
features, such as voice recorder, camera, and  
media player, or vice versa, for better  
performance.  
• Some devices, especially those that are not  
tested or approved by SIG, may be  
incompatible with your phone.  
Bluetooth services: display available  
Bluetooth services.  
Searching for and pairing with a  
Bluetooth device  
Setting up the Bluetooth feature  
1. From the Bluetooth menu, select My  
The Bluetooth menu provides the following  
options:  
Activation: activate or deactivate the  
Bluetooth feature.  
My devices: search for connectable  
Bluetooth devices.  
My phone’s visibility: allow other  
Bluetooth devices to search for your phone.  
devices  
.
2. Select Search for new devices  
.
After searching, a list of devices to which you  
can connect displays. The following icons  
indicate the type of device:  
Stereo headset  
Printer  
Computer  
106  
PDA  
Mobile phone  
Unknown device  
Mono headset/hands-free car kit  
Using device options  
From the device list, press <Options> to  
access the following options:  
Connect: connect to a headset or hands-  
free car kit.  
Disconnect: end the connection with the  
connected device.  
Browser files: search for data from the  
device and import data directly to your  
phone.  
The colour of the icon indicates the status of  
the device:  
Grey for unpaired devices  
Blue for paired devices  
Red for devices that are currently  
connected to your phone  
3. Select a device.  
Service list: access the Bluetooth service  
list of the device.  
4. Enter a Bluetooth PIN and press <OK>. This  
code is used just once and you do not need  
to memorise it.  
Rename: rename the paired device.  
Authorise device/Unauthorise device:  
When the owner of the other device enters  
the same code, pairing is complete.  
determine whether or not the phone asks  
you to permit connection when other devices  
try to connect to your phone.  
Delete: remove the selected device or all  
devices from the list.  
Some devices, especially headsets or hands-  
free car kits, may have a fixed Bluetooth PIN,  
such as 0000. If the other device has a code,  
you must enter it.  
107  
Menu functions  
2. Press <Yes> to receive data.  
Sending data via Bluetooth  
1. Activate the Bluetooth feature.  
2. Select the application in which the item you  
want to send is stored.  
Security (Menu 9.8)  
Use this menu to protect the phone against  
unauthorised use by managing the several  
access codes of your phone and SIM card.  
3. Scroll to the item you want.  
4. Press <Options> and select Send via  
.
Bluetooth Search for new devices  
If you enter an incorrect PIN/PIN2 three times,  
the SIM card is blocked. To unblock it, you need  
to enter your PUK/PUK2 (Personal Unblocking  
Key). The codes are supplied by your service  
provider.  
The phone searches for devices within range  
and displays a list of available devices.  
5. Select a device.  
6. If necessary, enter the Bluetooth PIN needed  
for pairing and press <OK>.  
PIN check (Menu 9.8.1)  
The 4- to 8-digit PIN (Personal Identification  
Number) protects your SIM card against  
unauthorised use. When this feature is enabled,  
the phone requires your PIN each time it is  
switched on.  
Receiving data via Bluetooth  
To receive data via Bluetooth, your phone’s  
Bluetooth feature must be active and its  
visibility must be enabled.  
1. If an unauthorised Bluetooth device sends  
data to your phone, press <Yes> to allow  
the device to access your phone.  
108  
 
Change PIN code (Menu 9.8.2)  
Privacy (Menu 9.8.5)  
Use this menu to change your PIN. The PIN  
check feature must be enabled to change the  
PIN.  
Use this menu to lock access to messages, files,  
i-mode access, or all menu functions on the  
phone, except for call functions.  
When a privacy option is enabled, you must  
enter the phone password to access the locked  
items or functions.  
Phone lock (Menu 9.8.3)  
Use this menu to lock the phone from  
unauthorised use.  
When this feature is enabled, you must enter a  
4- to 8-digit phone password each time the  
phone is switched on.  
SIM lock (Menu 9.8.6)  
This menu allows your phone to work only with  
the current SIM by assigning a SIM lock code.  
You must enter the SIM lock code to use a  
different SIM card.  
You can set the phone‘s password the first time  
you access a menu requiring the password. You  
can change the phone‘s password.  
Fixed dialling mode (Menu 9.8.7)  
If supported by your SIM card, Fixed Dialling  
Number (FDN) mode restricts your outgoing  
calls to a limited set of phone numbers. When  
this feature is enabled, you can make calls only  
to phone numbers stored on the SIM card.  
Change password (Menu 9.8.4)  
Use this menu to change your phone password.  
109  
 
Menu functions  
2. Specify the following options:  
Change PIN2 code (Menu 9.8.8)  
Mobile tracker: activate the Mobile  
tracker feature.  
Use this menu to change your current PIN2, if  
supported by your SIM card.  
Recipients: specify phone numbers to  
which you want to send the tracking  
messages.  
Mobile tracker (Menu 9.8.9)  
When someone tries to use your phone with  
another SIM card, the phone will automatically  
send the preset tracking message to your  
family or friends. You can check the phone  
number from which the messages are sent and  
then track your phone. This feature is useful  
when the phone is stolen or lost.  
Sender: enter the sender’s name.  
Message: check the preset tracking  
message text.  
3. When you have finished, press <Save>.  
4. Press <Accept> if you agree to the terms  
and conditions of service listed on the  
screen.  
Sending of the tracking message will be billed to  
the user of the unauthorised SIM card. To use  
your phone with any other SIM card, you must  
first deactivate the Mobile tracker feature.  
i-mode settings (Menu 9.9)  
Use this menu to create and customise the  
i-mode profiles containing the settings for  
accessing the i-mode browser or sending  
i-mails and MMS messages.  
1. Enter the phone password and press <OK>.  
110  
 
Mail server: enter the URL address of  
the i-Mail server.  
MMS server: enter the URL address of  
the MMS server.  
APN: enter the access point name used  
for the address of the GPRS network.  
User ID: enter the user ID.  
User password: enter the password.  
Your phone is suited for connecting to the  
network by default. If you change the settings  
without first checking with your service provider,  
the i-mode browser, i-mail, and MMS features  
may not work properly.  
1. Press [Left] or [Right] to select a profile.  
2. Enter information for the profile.  
Profile name: enter a profile name.  
3. Press <Save>.  
Proxy host - i-mode: enter the host of  
the proxy server for accessing the i-mode  
browser.  
Proxy port - i-mode: enter the port  
number of the proxy server for accessing  
the i-mode browser.  
SSL port: enter the port number of the  
SSL (Secure Sockets Layer) server.  
Portal URL: enter the URL address for  
the startup page of the i-mode browser.  
Location server URL: enter the URL  
address of your network cell ID.  
111  
Reset settings (Menu 9.10)  
Solve problems  
Help and personal needs  
Use this menu to reset the phone’s settings you  
have changed.  
To save the time and expense of an  
unnecessary service call, perform the simple  
checks in this section before contacting a  
service professional.  
1. Press [Centre] to select the setting  
categories to be reset.  
2. Press <Reset>.  
3. Press <Yes> to confirm the reset.  
4. Enter the phone password and press <OK>.  
When you switch on your phone, the  
following messages may appear:  
You can set the phone‘s password the first  
time you access a menu requiring the  
password. You can change the phone‘s  
“Insert SIM”  
Be sure that the SIM card is correctly  
installed.  
password.  
p. 109  
“Enter password”  
The automatic locking function has been  
enabled. You must enter the phone’s  
password before you can use the phone.  
“Enter PIN”  
You are using your phone for the first time.  
You must enter the PIN supplied with the  
SIM card.  
112  
     
The PIN check feature is enabled. Every time  
the phone is switched on, the PIN has to be  
entered. To disable this feature, use the PIN  
check menu.  
You have entered a number but it was not  
dialled  
Be sure that you have pressed [ ].  
Be sure that you have accessed the right  
cellular network.  
“Enter PUK”  
The PIN has been entered incorrectly three  
times, and the SIM card is now blocked.  
Enter the PUK supplied by your service  
provider.  
Be sure that you have not set an outgoing  
call barring option.  
Your correspondent cannot reach you  
Be sure that your phone is switched on.  
([ ] pressed for more than one second.)  
Be sure that you are accessing the correct  
cellular network.  
Be sure that you have not set an incoming  
call barring option.  
“No service,” “Network failure,” or “Not  
done” displays  
The network connection has been lost. You  
may be in a weak signal area. Move and try  
again.  
You are trying to access an option for which  
you have no subscription with your service  
provider. Contact the service provider for  
further details.  
Your correspondent cannot hear you  
speaking  
Be sure that you have switched on the  
microphone.  
113  
Solve problems  
Be sure that you are holding the phone close  
enough to your mouth. The microphone is  
located at the bottom of the phone.  
The battery does not charge properly or  
the phone sometimes turns itself off  
Wipe the charging contacts both on the  
phone and on the battery with a clean soft  
cloth.  
The phone starts beeping and “Warning.  
Low battery” flashes on the display  
Your battery is insufficiently charged.  
Recharge the battery.  
If the above guidelines do not help you to  
solve the problem, take note of:  
The audio quality of the call is poor  
The model and serial numbers of your phone  
Your warranty details  
A clear description of the problem  
Check the signal strength indicator on the  
display ( ). The number of bars indicates  
the signal strength from strong (  
weak ( ).  
) to  
Then contact your local dealer or Samsung  
after-sales service.  
Try moving the phone slightly or moving  
closer to a window if you are in a building.  
No number is dialled when you re-call a  
Phonebook entry  
Use the Contact list menu to ensure the  
number has been stored correctly.  
Re-store the number, if necessary.  
114  
The exposure standard for mobile phones  
employs a unit of measurement known as  
Specific Absorption Rate (SAR). The SAR limit  
recommended by the EU Council is 2.0W/kg.1  
Health and safety information  
SAR certification information  
SAR tests are conducted using standard  
operating positions with the phone transmitting  
at its highest certified power level in all tested  
frequency bands. Although the SAR is  
determined at the highest certified power level,  
the actual SAR level of the phone while  
operating can be well below the maximum  
value. This is because the phone is designed to  
operate at multiple power levels so as to use  
only the power required to reach the network.  
This phone meets European Union (EU)  
requirements concerning exposure to radio  
waves.  
Your mobile phone is a radio transmitter and  
receiver. It is designed and manufactured to not  
exceed the limits for exposure to radio-  
frequency (RF) energy, as recommended by the  
EU Council. These limits are part of  
comprehensive guidelines and establish  
permitted levels of RF energy for the general  
population. The guidelines were developed by  
independent scientific organisations through  
the periodic and thorough evaluation of  
scientific studies. The limits include a  
substantial safety margin designed to ensure  
the safety of all persons, regardless of age and  
health.  
1. The SAR limit for mobile phones used by the public is  
2.0 watts/kilogram (W/kg) averaged over ten grams of  
body tissue. The limit incorporates a substantial margin  
of safety to give additional protection for the public and  
to account for any variations in measurements. The SAR  
values may vary, depending on national reporting  
requirements and the network band.  
115  
   
Health and safety information  
In general, the closer you are to a base station,  
the lower the power output of the phone.  
If left unused, a fully charged battery will  
discharge itself over time.  
Use only Samsung-approved batteries, and  
recharge your battery only with Samsung-  
approved chargers. Disconnect the charger  
from the power source when it is not in use.  
Do not leave the battery connected to a  
charger for more than a week, since  
Precautions when using batteries  
Never use a charger or battery that is  
damaged in any way.  
Use the battery only for its intended  
purpose.  
If you use the phone near the network’s  
base station, it uses less power. Talk and  
standby time are greatly affected by the  
signal strength on the cellular network and  
the parameters set by the network operator.  
overcharging may shorten its life.  
Extreme temperatures will affect the  
charging capacity of your battery: it may  
require cooling or warming first.  
Do not leave the battery in hot or cold places  
because the capacity and lifetime of the  
battery will be reduced. Try to keep the  
battery at room temperature. A phone with a  
hot or cold battery may not work  
Battery charging time depends on the  
remaining battery charge, the type of  
battery, and the charger used. The battery  
can be charged and discharged hundreds of  
times, but it will gradually wear out. When  
the operation time is noticeably shorter than  
normal, it is time to buy a new battery.  
temporarily, even when the battery is fully  
charged. Li-ion batteries are particularly  
affected by temperatures below 0°C (32°F).  
116  
Do not short-circuit the battery. Accidental  
short-circuiting can occur when a metallic  
object like a coin, clip or pen causes a direct  
connection between the + and – terminals of  
the battery (metal strips on the battery). For  
example, do not carry a spare battery in a  
pocket or bag where the battery may contact  
metal objects. Short-circuiting the terminals  
may damage the battery or the object  
causing the short-circuiting.  
When you are driving a car, driving is your first  
responsibility. When using your wireless phone  
while driving, follow local regulations in the  
country or region you are in.  
Operating environment  
Remember to follow any special regulations in  
force in the area you are in, and always switch  
off your phone whenever it is forbidden to use  
it, or when it may cause interference or danger.  
When connecting the phone or any accessory to  
another device, read its user’s guide for  
detailed safety instructions. Do not connect  
incompatible products.  
Dispose of used batteries in accordance with  
local regulations. Always recycle. Do not  
dispose of batteries in a fire.  
Road safety  
As with other mobile radio transmitting  
Your wireless phone gives you the powerful  
ability to communicate by voice, almost  
anywhere, anytime. But an important  
responsibility accompanies the benefits of  
wireless phones, one that every user must  
uphold.  
equipment, users are advised that for the  
satisfactory operation of the equipment and for  
the safety of personnel, it is recommended that  
the equipment should only be used in the  
normal operating position (held to your ear with  
the antenna pointing over your shoulder).  
117  
Health and safety information  
Hearing aids  
Electronic devices  
Some digital wireless phones may interfere with  
some hearing aids. In the event of such  
interference, you may wish to consult your  
hearing aid manufacturer to discuss  
alternatives.  
Most modern electronic equipment is shielded  
from radio frequency (RF) signals. However,  
certain electronic equipment may not be  
shielded against the RF signals from your  
wireless phone. Consult the manufacturer to  
discuss alternatives.  
Other medical devices  
If you use any other personal medical devices,  
consult the manufacturer of your device to  
determine if it is adequately shielded from  
external RF energy.  
Your physician may be able to assist you in  
obtaining this information.  
Switch off your phone in health care facilities  
when regulations posted in these areas instruct  
you to do so.  
Pacemakers  
Pacemaker manufacturers recommend that a  
minimum distance of 15 cm (6 inches) be  
maintained between a wireless phone and a  
pacemaker to avoid potential interference with  
the pacemaker. These recommendations are  
consistent with the independent research and  
recommendations of Wireless Technology  
Research. If you have any reason to suspect  
that interference is taking place, switch off your  
phone immediately.  
118  
Users are advised to switch off the phone while  
at a refuelling point (service station). Users are  
reminded of the need to observe restrictions on  
the use of radio equipment in fuel depots (fuel  
storage and distribution areas), chemical  
plants, or where blasting operations are in  
progress.  
Vehicles  
RF signals may affect improperly installed or  
inadequately shielded electronic systems in  
motor vehicles. Check with the manufacturer or  
its representative regarding your vehicle.  
You should also consult the manufacturer of any  
equipment that has been added to your vehicle.  
Areas with a potentially explosive atmosphere  
are often but not always clearly marked. They  
include the areas below decks on boats,  
chemical transfer or storage facilities, vehicles  
using liquefied petroleum gas, such as propane  
or butane, areas where the air contains  
chemicals or particles, such as grain, dust or  
metal powders, and any other area where you  
would normally be advised to turn off your  
vehicle engine.  
Posted facilities  
Switch off your phone in any facility where  
posted notices require you to do so.  
Potentially explosive environments  
Switch off your phone when in any area with a  
potentially explosive atmosphere, and obey all  
signs and instructions. Sparks in such areas  
could cause an explosion or fire resulting in  
bodily injury or even death.  
119  
Health and safety information  
3. Press [  
].  
Emergency calls  
Certain features like Call Barring may need to  
be deactivated before you can make an  
emergency call. Consult this document and  
your local cellular service provider.  
This phone, like any wireless phone, operates  
using radio signals, wireless, and landline  
networks as well as user-programmed  
functions, which cannot guarantee connection  
in all conditions. Therefore, you should never  
rely solely on any wireless phone for essential  
communications like medical emergencies.  
To make or receive calls, the phone must be  
switched on and in a service area with adequate  
signal strength. Emergency calls may not be  
possible on all wireless phone networks or when  
certain network services and/or phone features  
are in use. Check with local service providers.  
To make an emergency call:  
1. Switch on the phone.  
Other important safety information  
Only qualified personnel should service the  
phone or install the phone in a vehicle.  
Faulty installation or service may be  
dangerous and may invalidate any warranty  
applicable to the device.  
Check regularly that all wireless phone  
equipment in your vehicle is mounted and  
operating properly.  
Do not store or carry flammable liquids,  
gases, or explosive materials in the same  
compartment as the phone, its parts, or  
accessories.  
2. Key in the emergency number for your  
present location. Emergency numbers vary  
by location.  
120  
For vehicles equipped with an air bag,  
remember that an air bag inflates with great  
force. Do not place objects, including  
installed or portable wireless equipment, in  
the area over the air bag or in the air bag  
deployment area. Improperly installed  
wireless equipment could result in serious  
injury if the air bag inflates.  
Switch off your phone before boarding an  
aircraft. It is dangerous and illegal to use  
wireless phones in an aircraft because they  
can interfere with the operation of the  
aircraft.  
Care and maintenance  
Your phone is a product of superior design and  
craftsmanship and should be treated with care.  
The suggestions below will help you fulfill any  
warranty obligations and allow you to enjoy this  
product for many years.  
Keep your phone and all its parts and  
accessories out of the reach of small children  
and pets. They may accidentally damage  
these things or choke on small parts.  
Keep the phone dry. Precipitation, humidity,  
and liquids contain minerals that corrode  
electronic circuits.  
Do not use the phone with a wet hand. Doing  
so may cause an electric shock to you or  
damage to the phone.  
Failure to observe these instructions may  
lead to the suspension or denial of telephone  
services to the offender, or legal action, or  
both.  
Do not use or store the phone in dusty, dirty  
areas, as its moving parts may be damaged.  
121  
Health and safety information  
Do not store the phone in hot areas. High  
temperatures can shorten the life of  
electronic devices, damage batteries, and  
warp or melt certain plastics.  
Do not store the phone in cold areas. When  
the phone warms up to its normal operating  
temperature, moisture can form inside the  
phone, which may damage the phone’s  
electronic circuit boards.  
Do not drop, knock, or shake the phone.  
Rough handling can break internal circuit  
boards.  
Do not use harsh chemicals, cleaning  
solvents, or strong detergents to clean the  
phone. Wipe it with a soft cloth slightly  
dampened in a mild soap-and-water  
solution.  
Do not paint the phone. Paint can clog the  
device’s moving parts and prevent proper  
operation.  
Do not put the phone in or on heating  
devices, such as a microwave oven, stove, or  
radiator. The phone may explode when  
overheated.  
When the phone or battery gets wet, the  
label indicating water damage inside the  
phone changes colour. In this case, phone  
repairs are no longer guaranteed by the  
manufacturer's warranty, even if the  
warranty for your phone has not expired.  
If your phone has a flash or light, do not use  
it too close to the eyes of people or animals.  
This may cause damage to their eyes.  
122  
Use only the supplied or an approved  
replacement antenna. Unauthorised  
antennas or modified accessories may  
damage the phone and violate regulations  
governing radio devices.  
If the phone, battery, charger, or any  
accessory is not working properly, take it to  
your nearest qualified service facility. The  
personnel there will assist you, and if  
necessary, arrange for service.  
123  
* Depending on the software installed or your service provider or country, some of the descriptions in  
this guide may not match your phone exactly.  
* Depending on your country, your phone and accessories may appear different from the illustrations in  
this guide.  
Printed in Korea  
World Wide Web  
http://www.samsungmobile.com  
Code No.:GH68-13286A  
English. 03/2007. Rev. 1.2  

Verizon Communications Cell Phone DROID RAZR MAXX User Manual
Toshiba TRANSMEMORY U2P User Manual
Sony Ericsson Cyber Shot User Manual
Sony DRU 500A User Manual
Silicon Laboratories SI5326 User Manual
Seagate BARRACUDA 720011 SERIAL ATA ST3640330AS User Manual
Samsung GT N7105 User Manual
Philips SOUNDMACHINE AZ102V User Manual
Oregon Scientific RM822 User Manual
Nokia Cell Phone 6300B User Manual