DUAL BAND
GSM TELEPHONE
SGH-R210S
OWNER’S MANUAL
Printed in Korea
Code No: GH68-02179A
English. 09/2001 Rev.1.0
World Wide Web
Contents
Safety Precautions . . . . . . . . . . . . . . . .
7
9
Unpacking . . . . . . . . . . . . . . . . . . . . . .
Your Phone . . . . . . . . . . . . . . . . . . . . . 10
Phone Layout. . . . . . . . . . . . . . . . . . . . . . . . . . 10
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Service Light . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Getting Started . . . . . . . . . . . . . . . . . . 15
Installing the SIM Card and the Battery . . . 15
Charging a Battery . . . . . . . . . . . . . . . . . . . . . 18
Switching the Phone On/Off . . . . . . . . . . . . . 20
Locking/Unlocking the Keypad . . . . . . . . . . . 21
Call Functions . . . . . . . . . . . . . . . . . . . 22
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . 22
Adjusting the Volume . . . . . . . . . . . . . . . . . . . 24
Answering or Rejecting a Call . . . . . . . . . . . 25
Viewing Missed Calls. . . . . . . . . . . . . . . . . . . 26
In-Call Options . . . . . . . . . . . . . . . . . . . . . . . . 28
Entering Text . . . . . . . . . . . . . . . . . . . 35
Changing the Text Input Mode . . . . . . . . . . . 36
Using the T9 Mode . . . . . . . . . . . . . . . . . . . . . 36
Using the ABC Mode . . . . . . . . . . . . . . . . . . . 38
Using the Number Mode . . . . . . . . . . . . . . . . 40
Using the Symbolic Mode . . . . . . . . . . . . . . . 40
3
Contents(continued)
Phonebook . . . . . . . . . . . . . . . . . . . . . 41
Storing a Phone Number with a Name . . . . 41
Phonebook Options . . . . . . . . . . . . . . . . . . . . 43
Speed-dialling by SIM Memory Location . . 45
Searching for and Dialling a Number
in the Phonebook . . . . . . . . . . . . . . . . . . . . . . 46
Dialling a Number using the Service
Directory or Information Numbers . . . . . . . 47
Tones . . . . . . . . . . . . . . . . . . . . . . . . . 70
Ring Tone (Menu 3-1) . . . . . . . . . . . . . . . . . . . 70
Melody Composer (Menu 3-2). . . . . . . . . . . . 71
Ring Volume (Menu 3-3). . . . . . . . . . . . . . . . . 73
Alert Type (Menu 3-4). . . . . . . . . . . . . . . . . . . 73
Keypad Tone (Menu 3-5) . . . . . . . . . . . . . . . . 74
Message Tone (Menu 3-6) . . . . . . . . . . . . . . . 74
Error Tone (Menu 3-7). . . . . . . . . . . . . . . . . . . 75
Minute Minder (Menu 3-8). . . . . . . . . . . . . . . 75
Connect Tone (Menu 3-9). . . . . . . . . . . . . . . . 75
Selecting Functions and Options . . . . . . 48
Example: Selecting an Alert Type . . . . . . . . . 50
Settings . . . . . . . . . . . . . . . . . . . . . . . 76
Phone Settings (Menu 4-1) . . . . . . . . . . . . . . 76
Network Services (Menu 4-2) . . . . . . . . . . . . 81
Security Settings (Menu 4-3). . . . . . . . . . . . . 90
LCD Settings (Menu 4-4) . . . . . . . . . . . . . . . . 93
Browser Settings (Menu 4-5) . . . . . . . . . . . . 94
Service Colour (Menu 4-6). . . . . . . . . . . . . . . 95
Using the Menus . . . . . . . . . . . . . . . . . 52
Accessing Menu Functions by Scrolling . . . 52
Accessing Menu Functions by
Using Shortcuts . . . . . . . . . . . . . . . . . . . . . . . 53
Menu Map . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Call Records . . . . . . . . . . . . . . . . . . . . 59
Missed Calls (Menu 1-1) . . . . . . . . . . . . . . . . 59
Received Calls (Menu 1-2). . . . . . . . . . . . . . . 59
Dialled Calls (Menu 1-3). . . . . . . . . . . . . . . . . 60
Call Time (Menu 1-4). . . . . . . . . . . . . . . . . . . . 60
Call Cost (Menu 1-5) . . . . . . . . . . . . . . . . . . . . 61
Organiser . . . . . . . . . . . . . . . . . . . . . . 96
Scheduler (Menu 5-1). . . . . . . . . . . . . . . . . . . 96
Alarm (Menu 5-2) . . . . . . . . . . . . . . . . . . . . . . 98
Calculator (Menu 5-3). . . . . . . . . . . . . . . . . . . 100
World Time (Menu 5-4). . . . . . . . . . . . . . . . . . 102
Clock (Menu 5-5). . . . . . . . . . . . . . . . . . . . . . . 103
Messages . . . . . . . . . . . . . . . . . . . . . . 62
Voice Mail (Menu 2-1) . . . . . . . . . . . . . . . . . . 62
Read Messages (Menu 2-2). . . . . . . . . . . . . . 63
Write Messages (Menu 2-3) . . . . . . . . . . . . . 65
Preset Message List (Menu 2-4) . . . . . . . . . . 66
Set Up (Menu 2-5). . . . . . . . . . . . . . . . . . . . . . 66
Broadcast (Menu 2-6) . . . . . . . . . . . . . . . . . . 67
Picture Messages (Menu 2-7). . . . . . . . . . . . 68
Games . . . . . . . . . . . . . . . . . . . . . . . . 104
4
5
Safety Precautions
Contents(continued)
WWW Services . . . . . . . . . . . . . . . . . . 105
Launching the Browser . . . . . . . . . . . . . . . . . 105
Exiting the Browser . . . . . . . . . . . . . . . . . . . . 105
Using Local Bookmarks . . . . . . . . . . . . . . . . . 105
Opening a Page Directly . . . . . . . . . . . . . . . . 106
Navigating with the WAP Browser. . . . . . . . 107
Network Connection Information . . . . . . . . . 109
Read these simple guidelines. Failure to comply with
them may be dangerous or illegal.
For more detailed safety information, see “Safety
Information” on page 120.
Road safety comes first
Do not use a hand-held phone while driving; park the
vehicle first. Remember that in some countries, it is
illegal to use a hand-held phone while driving.
Additional Services . . . . . . . . . . . . . . . 110
ALS (Alternate Line Service) . . . . . . . . . . . . . 110
Switch off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Solving Problems . . . . . . . . . . . . . . . . . 112
Reference Information . . . . . . . . . . . . . 115
Access Codes . . . . . . . . . . . . . . . . . . . . . . . . 115
Using the Batteries . . . . . . . . . . . . . . . . . . . . 118
Safety Information . . . . . . . . . . . . . . . . . . . . . 120
Switch off in aircraft
Mobile phones can cause interference. Using them
on aircraft is both illegal and dangerous.
Glossary . . . . . . . . . . . . . . . . . . . . . . 124
Index . . . . . . . . . . . . . . . . . . . . . . . . . 128
Quick Reference Card . . . . . . . . . . . . . . 133
Respect special regulations
Follow any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause interference
or danger (in a hospital for example).
Interference
All mobile phones may be subject to radio
interference, which may affect their performance.
7
6
S a f e t y P re c a u t io n s
Unpacking
Your package contains the following items.
Qualified service
Only qualified service personnel must repair cellular
equipment. Use only approved accessories and
batteries.
Use sensibly
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Phone
Travel Adapter
Emergency calls
Ensure that the phone is switched on and in service.
Enter the emergency number (112 or another official
emergency number) and press the
location. Do not end the call until given permission to
do so. End the call by pressing
key. Give your
.
Battery
Owner’s Manual
IMPORTANT! Use only SAMSUNG-approved
accessories. The use of any other power accessory
will invalidate any approval or warranty applying to
the phone, and may be dangerous.
In addition, you can obtain the following accessories
for your phone from your local SAMSUNG dealer:
• Cigarette lighter adapter
• Simple hands-free car kit
• Standard battery
• Data kit
When you disconnect the power cord of any
accessory, grasp and pull the connector, not the cord.
• Ear-microphone*
• Hand strap*
* Depending on the country, this accessory may be supplied
in the standard package.
8
9
Yo u r P h o n e
Your Phone
Soft keys
Phone Layout
Perform the functions indicated by the text
above them (in the bottom line of the display).
The following illustration shows the main elements
of your phone.
In the menu facility, scroll through the menu
options and phonebook memory.
During a call, adjust the earpiece volume.
In idle mode, adjust the key tone volume.
Deletes characters from the display.
In idle mode, allows you to access the WAP
Browser quickly.
Service light
Antenna
Makes or answers a call.
In idle mode, recalls the last number dialled.
In the menu facility, selects a menu function or
stores information that you have entered (such
as a name) in the phone or SIM memory.
Earpiece
Earphone
jack
Display
Ends a call. Also switches the phone on and
off when pressed and held.
In the menu facility, returns to the idle mode
and cancels your input.
Enter numbers, letters and some special
characters.
When held down, toggles the Keypad lock
mode on and off.
Microphone
When held down, toggles the Silent mode on
and off. This feature is not available when the
phone is connected to an optional car kit.
10
11
Yo u r P h o n e
Yo u r P h o n e
Display
Display Layout
Icons
The display comprises three areas.
Signal strength: shows the received
signal strength. The greater the number
of bars, the better the signal strength.
Icons
Text and
graphic area
Service: appears when a call is in
progress.
Soft key
indications
New Message: appears when a new
text message has been received.
Area
Description
Displays various icons (see opposite).
New Voice Mail: appears when a new
voice mail message has been received.
First line
Middle lines Display messages, instructions and
any information that you enter
Vibrator on/Silent mode on: appears
when the Vibrate mode or Silent mode
is active.
(number to be dialled, for example).
Last line
Shows the functions currently
assigned to the two soft keys or
various types of information,
such as missed calls, call diverting
options, advice of charge information
or the keypad lock icon ( ). This
information varies, depending on
your SIM card, service provider or
current context.
Alarm on: appears when you set an
alarm.
Battery strength: shows the level of
your battery. The more bars you see, the
more power you have left.
12
13
Yo u r P h o n e
Getting Started
Installing the SIM Card and the Battery
Backlight
The display and keypad are illuminated by a
backlight. When you press any key, the backlight
comes on.
When you subscribe to a cellular network, you are
provided with a SIM card loaded with your subscription
details (PIN, optional services available and so on).
To specify the length of time for which the backlight
is active, set the Backlight menu option (4-1-5); see
page 78 for further details.
• Keep all SIM cards out of the reach of small
children.
• The SIM card and its contacts can be easily
damaged by scratches or bending, so be careful
when handling, inserting or removing the card.
• Before installing the SIM card, always make sure
that the phone is switched off before removing the
battery.
Service Light
There are several cases in which the service light
flashes.
• When in service.
1. If necessary, switch off the phone by holding
To activate or deactivate the service light, set the
Service Light menu option (4-1-6); see page 79.
To select the colour of the service light, set the
Service Colour menu option (4-6); see page 95.
down
until the closing animation is displayed.
2. Remove the battery. To do so:
À Press and hold down the catch above the
battery on the back of the phone.
Á Slide the battery away, as shown.
• When an SMS message is received (if the Alert
Type menu option (3-4) is set to Light only (see
page 73), the light is orange).
¬
• When the alarms rings (the light is white).
• When you receive a call (the light is green by
default).
To change the colour, set the phonebook Colour
option; see page 45.
•
14
15
Ge t t in g S t a rt e d
Ge t t in g S t a rt e d
3. Slide the SIM card holder in the direction of the
arrow and hold it in this position.
5. Hold the SIM card down and release the holder to
lock it into place.
6. Place the battery back on the phone. Slide the
battery up towards the catch until it locks into
place. Make sure that the battery is properly
installed before switching on the phone.
4. Insert the SIM card under the two tabs, ensuring
that the cut corner is lower right and the gold
contacts of the card face into the phone.
Note: If you need to remove the SIM card, carefully
slide the SIM card lock back and take the card
out of the holder.
16
17
Ge t t in g S t a rt e d
Ge t t in g S t a rt e d
Charging a Battery
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter is provided with your phone.
Use only approved batteries and chargers. Ask your
local SAMSUNG dealer for further details.
3. When charging is finished, disconnect the adapter
from the power outlet and from the phone by
pressing the grey tabs on both sides of the
connector and pulling the connector out.
The phone can be used while the battery is charging.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
120minutes.
1. With the battery in position on the phone, connect
the lead from the travel adapter to the bottom of
the phone. Check that the arrow on the lead
connector is facing towards the front of the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, you will hear a warning tone and a
message will be repeated at regular intervals on the
display:
** Warning **
Bat t e ry Low
2. Connect the adapter to a standard AC wall outlet.
When the battery is charging, the battery icon
in the top right-hand corner of the display fills
repeatedly.
When the battery becomes too weak for the phone
to operate, the phone switches off automatically.
Note: Do not remove the battery from the phone
while the travel adapter is connected to the
phone.
18
19
Ge t t in g S t a rt e d
Ge t t in g S t a rt e d
Switching the Phone On/ Off
4. When you wish to switch the phone off, hold
down for more than two seconds.
1. Hold down
for more than one second to
switch the phone on.
Note: If “Insert SIM Card” appears on the display,
please check that the SIM card is correctly
inserted. The phone requires a 3 V SIM card.
Please contact your service provider if you
experience any problems.
Locking/ Unlocking the Keypad
With the key lock mode, you can prevent keys from
being pressed accidentally.
2. If the phone asks for a password, key in the
password and press the OK soft key. The phone
password is factory set to 0000. For further
details, see page 115.
Pressing and holding down the
key toggles the
key lock mode between on and off.
When the key lock mode is On, the keypad lock icon
) is displayed and the keys have no effect when
pressed in idle mode.
3. If the phone asks for a PIN, key in the PIN and
press the OK soft key. For further details, see
page116.
(
The phone searches for your network and when it
finds it, the idle screen, illustrated below, is
displayed.
<SERVICE PROVIDER>
Sat 1 4 Mar 1 2 :5 7
Me nu
Pho ne Bo o k
Note: The display language is determined by the
SIM card inserted. To change the language,
use the Language menu option (4-1-3); for
further details, refer to page 77.
20
21
Ca ll Fu n c t io n s
Call Functions
Making a Call
When the idle screen is displayed, key in the area
code and phone number and press
Ending a Call
.
When you have finished your call, briefly press
.
Note: If you have set the Auto Redial option (4-1-7) to
ON (see page 79) and the person called does not
answer or the line is busy, the number is
Making a Call from the Phonebook
redialled automatically up to ten times.
You can store the names and phone numbers of the
people you call regularly in the SIM card memory,
called the phonebook. You then simply select the
required name to recall the associated number. For
further details on the Phonebook feature, refer to
page 41.
Making International Calls
1. Press and hold down the
key.
The + international prefix appears.
2. Key in the country code, area code and phone
number and press
.
Redialling the Last Number
The phone stores the last 10 numbers dialled. To
recall any of these numbers, proceed as follows.
Correcting the Number
To clear...
Then...
1. If there are any characters on the display, press
the
2. Press the
numbers dialled.
3. Use the or
numbers until the required number is displayed.
4. Press the key to dial the number displayed.
key to return to the idle mode.
The last digit
displayed
Press the
soft key.
or
key to access the list of the last
Any other digit
in the number
Press the
until the cursor ( x) is immedi-
ately to the right of the digit to
be cleared. Press the
key. You can also insert a
missing digit simply by pressing
the appropriate key.
key
keys to scroll through the
soft
The whole display Hold down the
soft key for
more than one second.
22
23
Ca ll Fu n c t io n s
Ca ll Fu n c t io n s
Answering or Rejecting a Call
Adjusting the Volume
When somebody calls you, the phone rings and the
phone icon in the middle of the screen flashes.
During a call, if you wish to adjust the earpiece
volume, use the
or
keys.
n n n n
( (
Caller’s name or
number
(if available)
))
A c c e p t
Re j e c t
If the caller can be identified, the caller’s phone
number (or name if stored in your phonebook) is
displayed. If the caller cannot be identified, only the
phone icon flashes.
In idle mode, you can adjust the key tone volume
using the same keys.
Answering a Call
There are two ways to answer an incoming call.
• Press the Accept soft key.
• When the Any-key Answer menu option is set to
ON, press any key, except
or the Reject soft
key.
Note: If the keypad is locked when you receive an
incoming call, the keypad is automatically
unlocked. When you have ended the call, the
keypad is automatically locked after 15 seconds.
Rejecting a Call
To reject a call, press
or the Reject soft key.
24
25
Ca ll Fu n c t io n s
Ca ll Fu n c t io n s
Viewing Missed Calls
If you are unable to answer a call for any reason, you
can find out who was calling you, provided that this
service is available. In this way, you can call the
person back, if necessary.
Editing a Missed Call Number
1. Press the Options soft key.
2. Press
option.
or
to highlight the Paste
The number of missed calls is displayed on the idle
screen immediately after the call was missed.
3. Press the Select soft key.
To view the missed call immediately, proceed as
follows.
4. Change the number as required. Press
to move back through the number.
or
5. To...
Call the number
Then press the...
1. Press the View soft key.
key.
The number corresponding to the most recent
missed call is displayed, if available.
Store the number
Save soft key and enter
the name and location
required (for further
2. To...
Scroll through the
Then press the...
or key.
details, refer to page 41).
missed calls
Deleting a Missed Call
Call the number displayed
key.
1. Press the Options soft key.
Edit or delete a missed
call number
Options soft key
(see opposite).
2. Press
option.
or
to highlight the Delete
3. Press the Select soft key.
You can press
Call feature.
at any time to exit the Missed
Note: You can access the Missed Call feature at any
time by selecting the Missed Calls menu option
(1-1); for further details, see page 59.
26
27
Ca ll Fu n c t io n s
Ca ll Fu n c t io n s
In-Call Options
Your phone provides a number of control functions
that you can use during a call. To access these
functions during a call, press the Options soft key.
Searching for a Number in the Phonebook
You can search for a number in the phonebook during
a call.
Switching the Microphone Off (Mute)
1. Press the Options soft key.
You can temporarily switch your phone’s microphone
off, so that the other party cannot hear you.
2. Press
option.
or
to highlight the Phonebook
Example: You wish to say something to another
person in the room but do not want the
other party to hear you.
3. Press the OK soft key.
4. Enter the start of the name that you wish to find
and press the Find soft key.
To switch the microphone off temporarily, proceed as
follows.
Note: You can also scroll through the phonebook
from the beginning, by pressing the Find soft
key directly.
1. Press the Options soft key.
2. Press
or
to highlight the Mute option.
The phonebook entries are listed, starting with the
first entry matching your input. This entry is also
highlighted.
3. Press the OK soft key.
Your correspondent can no longer hear you.
5. To view the highlighted entry, press the View soft
To switch the microphone back on, proceed as
follows.
key.
For a more detailed description of the Phonebook
feature, refer to page 41.
1. Press the Options soft key.
2. Press
option.
or
to highlight the Unmute
3. Press the OK soft key.
Your correspondent can hear you again.
28
29
Ca ll Fu n c t io n s
Ca ll Fu n c t io n s
Putting a Call on Hold
Answering a Second Call
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can swap between the calls.
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and you have set the Call Waiting menu
option (4-2-3) to Activate (see page 86). You will be
notified of an incoming call by a call waiting tone.
To place a call on hold, press the Options soft key,
and select the Hold option. You can reactivate the
call whenever you want, by pressing the Retrieve
soft key.
To answer a call while you have a call in progress,
proceed as follows.
1. Press
to answer the incoming call.
The first call is automatically put on hold.
To make a call while you have a call in progress,
proceed as follows.
2. To switch between the two calls, press the Swap
1. Key in the phone number that you wish to dial or
look it up in the phonebook.
soft key.
To end a held call, press the Options soft key and
select the End held call option.
2. Press
to dial the second call.
The first call is automatically put on hold.
3. To end the current call, press
.
Or alternatively, proceed as follows.
You are automatically switched back to any held
calls.
1. Put the current call on hold by pressing the
Options soft key and selecting the Hold option.
2. Make the second call in the normal way.
To swap between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other party.
When you have finished, end each call normally by
pressing
.
30
31
Ca ll Fu n c t io n s
Ca ll Fu n c t io n s
Making a Multiparty Call
2. Highlight the required person, by pressing
or , followed by
A multiparty call is a network service that allows
up to six people to take part simultaneously in a
multiparty or conference call. For more information,
contact your service provider.
.
3. Select Private.
Now you can talk privately with that person. The
other participants can continue to converse with
each other.
Setting up the Multiparty Call
1. Call the first participant in the normal way.
4. To return to the multiparty call, press the Options
soft key and select Join.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
All the multiparty call participants can now hear
each other.
3. To join the first participant to the multiparty call,
press the Options soft key and select the Join
option.
Dropping One Participant
1. Press the Options soft key and choose the
Select one option.
4. To add a new person to the multiparty call, call
the person in the normal way, then press the
Options soft key and select the Join option.
The list of call participants appears.
2. Highlight the required person, by pressing
You can add incoming callers by answering the call
and pressing Options, followed by Join. Repeat as
required.
or
, followed by
.
3. Select the Remove soft key.
The call is ended with that participant, but you
can continue to talk with the other participants.
Having a Private Conversation With One
Participant
4. End the multiparty call by pressing
.
1. Press the Options soft key and choose the
Select one option.
The list of call participants appears.
32
33
Ca ll Fu n c t io n s
Entering Text
Muting/ Sending Key Tones
When storing a name in the phonebook, creating
your personal greeting or scheduling events in your
calendar, you will need to enter text.
These options allow you to turn the key tones off or
on. If the Mute keys option is selected, your phone
does not transmit the key tones.
You are provided with the following text input
modes.
Note: To communicate with answering machines or
computerised telephony systems, the Send
keys option must be selected.
T9 mode
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has
more than one letter – when you press the
once, J, K or L may be displayed. The T9 mode
automatically compares your keystrokes with an
internal linguistic dictionary to determine the correct
word, thus requiring far fewer keystrokes than the
traditional ABC mode.
key
Using the SMS Service
If you receive an SMS (Short Message Service)
message during a call, the message icon (
appears in the display.
)
After you have finished your call, you can read the
message; refer to page 63 for further details.
ABC mode
This mode allows you to enter letters by pressing the
key labelled with the required letter once, twice or
three times until the letter is displayed.
Number mode
This mode allows you to enter numbers.
Symbolic mode
This mode allows you to enter special characters.
is a registered trademark of Tegic Communications, Inc.
34
35
En t e rin g Te xt
En t e rin g Te xt
Changing the Text Input Mode
1. When you are in the T9 predictive text input
mode, start entering a word by pressing keys
to . Press each key only once for one
1. When you are in a field that allows characters to
be entered, you will notice the text input mode
indicator in the lower right corner of the display.
letter.
Example: to enter HELLO in the T9 mode, press
and
,
,
,
.
The word that you are typing appears in the display.
It may change with each key that you press.
S a v e
Text input mode
indicator:
ABC: ABC mode
NUM: Number mode
: T9 mode
2. Enter the whole word before editing or deleting
any keystrokes.
3. If the word is correct, start entering the next
word.
SYM: Symbolic mode
Otherwise, press
alternative words for the keys that you have
pressed.
repeatedly to display
2. Press the right soft key.
The modes available are displayed.
3. Scroll to the required mode, then press the
Example: OF and ME both share the sequence
Select soft key.
,
. The phone displays the
most commonly used choice first.
Using the T9 Mode
4. Complete each word with a space by pressing
the
key.
The T9 predictive text input mode allows you to enter
words easily with a minimum of key presses. As you
press each key, the phone selects a letter that makes
up the word that it thinks you are typing, based on a
built-in dictionary. As a new letter is added, the word
changes based on the key that you have pressed.
To type words not found in the T9 mode, change the
text input mode to the ABC mode.
To delete letters, press
. Press and hold
down to erase entire words.
36
37
En t e rin g Te xt
En t e rin g Te xt
There are three shift options:
2. Select the other letters in the same way.
•
•
•
Lower Case (no shift indicator)
Initial Cap ( indicator)
Caps Lock ( indicator)
Note: The cursor moves to the right when you
press a different key. When entering the
same letter twice (or a different letter on the
same key), just wait for a few seconds for
the cursor to move right automatically, and
then select the next letter.
P
ress
one or more times to display the appro-
priate shift indicator and continue typing normally.
There are three shift options:
•
•
•
Lower Case (no shift indicator)
Initial Cap ( indicator)
Caps Lock ( indicator)
Me e t m e at
Press the
key one or more times to display the
OK
ENG
appropriate shift indicator in the bottom line of the
display and continue typing normally.
Shift indicator
Note:To exit the text input mode without saving your
input, press . The phone returns to the
To insert a space, press the
key.
previous menu level.
To delete letters, press the
key. Press and hold
down the
key to clear the display.
Using the ABC Mode
Use the
to
keys to enter your text.
1. Press the key labelled with the required letter:
• Once for the first letter
• Twice for the second letter
• And so on
Note: To display a list of special characters,
press
. See the table on page 39 for
more information on the characters available
using the keys.
38
39
En t e rin g Te xt
Phonebook
You can store phone numbers and their correspon-
ding names in the memory of your SIM card. In
addition, you can store up to 100 numbers and
names in the phone memory. The SIM card and
phone memories, although physically separate, are
used as if they were a single entity, called the
phonebook.
Using the Number Mode
The Number mode enables you to enter numbers in a
text message (a telephone number, for example).
Press the keys corresponding to the required digits
before manually switching back to the appropriate
text entry mode.
Storing a Phone Number with a Name
Using the Symbolic Mode
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in the phonebook.
The Symbolic mode enables you to enter various
symbols.
1. Key in the number to be stored.
Notes:
• If you make a mistake while entering a number,
1 2 3 4 5 6 7 8 9
correct it using the
details, refer to page 22.
soft key. For further
. (
)
,
:
; % !
• To insert a dialling pause for special phone
services, such as banking by phone, hold down
. ‘P’ is displayed to indicate the pause.
S a v e
S YM
To scroll through the symbols available, press
the or key. Press the number key
2. When you are sure that the number is correct,
press the Save soft key.
corresponding to the required symbol. The phone
then automatically switches back to the text entry
mode used immediately prior to selecting the
Symbolic mode.
3. Enter the corresponding name (the maximum
length depends on your SIM card). For information
on how to enter a name, see page 35.
Note: To enter a new line character in a text
4. When you are satisfied, press the Save soft key.
The phone now displays the first free location in
the last memory used to save a number and
name. If that memory is full, the first free location
in the other memory is displayed.
message, press the
mode.
key in the Symbolic
40
41
P h o n e b o o k
P h o n e b o o k
Phonebook Options
When storing or viewing a number in the phonebook,
Options appears above the left soft key to allow you
to access the phonebook options, described in the
following paragraphs.
5. Press the right soft key to toggle between the
phone (To Phone) and card (To Card) memories.
6. If you do not want to save the number and name
in the suggested location, press
to clear
the location number and enter your preferred
location by pressing the number keys.
Accessing the Options
7. Press OK to store the name and number.
You can access the phonebook options by
pressing the Options soft key, or scroll through
To access the various phonebook options, proceed as
follows.
1. Press the Options soft key.
the memory with
or
.
The first available option is highlighted.
8. To exit, press the
key.
2. To...
Then press the...
Select the
Select soft key.
highlighted option
Highlight a
or
key one or
different option
more times until the
required option is
highlighted.
Paste
Allows you to paste the phonebook number into the
normal dialling mode. Use this option to dial a
number similar to one in the phonebook (a different
extension in the same office for example).
Use the soft key to change the number as
required (refer to page 22 for further details). When
you are ready to dial, press
.
42
43
P h o n e b o o k
P h o n e b o o k
Edit
Colour
Allows you to edit a number and name stored in the
phonebook.
This option allows you to assign a specific service
light colour to a number and thus distinguish the
caller by the service light colour.
Three colours are available (red, violet and blue) and
they can be assigned to up to five numbers.
If no specific colour is assigned, the service light
flashes in green when you receive a call.
Erase
Allows you to erase a number and name stored in
the phonebook.
You are asked to confirm that you wish to erase the
name and number from the phonebook by pressing
the Yes soft key.
Speed-Dialling by SIM Memory Location
Once you have stored phone numbers in the SIM
card, you can dial them easily whenever required.
Copy
Allows you to copy a phonebook number to another
location. Use this option to store a number similar to
one already in memory; once copied, edit the number
and store it in another location on the SIM card or in
the phone memory.
To speed-dial a number, proceed as follows.
To speed-dial a
Then...
number in locations...
2 to 9
Press and hold down the
appropriate key.
Memory Status
Allows you to check how many names and phone
numbers are stored and how many locations are still
free in the card memory and phone memory.
10 and above
Press the appropriate keys,
followed by the # key.
When the display shows
the name, phone number
and location, press the
Dial soft key.
Alert
Allows you to assign a specific ringing tone to a
number and consequently distinguish the caller by
the ringing tone. Specific ringing tones can be
assigned to up to five numbers.
Note: Memory location 1 is reserved for your Voice
Mail server number.
44
45
P h o n e b o o k
P h o n e b o o k
5. To...
View the
Then press the...
Searching for and Dialling a Number in
the Phonebook
View soft key.
highlighted entry
1. When the idle screen is displayed, press the
Select a
different entry
or
key one or more
PhoneBook soft key.
times until the required entry is
highlighted.
2. If your SIM card provides Service Dialling Number
(SDN) and Information Number services, you will
see the following screen.
Look for a name Key labelled with the required
starting with a
different letter
letter.
1 .
[
Find Entry
]
6. Once you have found the required entry, press
to dial the number.
2. Service Dir.
3.InformationNumbers
OK
Dialling a Number using the Service
Directory or Information Numbers
3. Press the OK soft key when Find Entry is
highlighted.
Note: The Service Dir. and Information Numbers
options may not be available, depending on your
SIM card.
4. Enter the start of the name that you wish to find
and press the Find soft key.
Note: You can also scroll through the phonebook
from the beginning, by pressing the Find
soft key directly.
When the idle screen is displayed, press the
PhoneBook soft key. You will see the screen
illustrated on page 46.
The phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
Service Dir.: enables you to view the Service Directory
and make calls from it.
Information Numbers: enables you to see the
Information Numbers in a tree structure and make
a call.
46
47
S e le c t in g Fu n c t io n s a n d Op t io n s
Selecting Functions
and Options
To view the various functions/options available and
select the one required, proceed as follows.
Your phone offers a set of functions that allow
you to customise your phone. These functions are
arranged in menus and sub-menus, accessed via the
two soft keys ( and ). Each menu and sub-
menu allows you to view and alter the settings of a
particular function.
1. Press the appropriate soft key.
2. To...
Select the:
Then press the...
Left soft key.
• Function displayed
or
• Option highlighted
The roles of the soft keys vary according to the
current context; the label on the bottom line of the
display just above each key indicates its current role.
View the next function
or highlight the next
option in a list
key.
key.
Example:
Move back to the
previous function
or option in a list
<SERVICE PROVIDER>
S a t 1 4 M a r 1 2 : 5 7
Move back up one
level in the structure
Right soft key.
key.
Exit the structure
without changing
the settings
In some functions, you may be asked for a password
or PIN. Enter the required code and press
.
Note:When you access a list of options, your phone
highlights the current option. If, however, there
are only two options, such as On/Off or
Enable/Disable, your phone highlights the
option that is not currently active, so that you
can select it directly.
Press the left soft key
to access the menu
feature.
Press the right soft
key to access the
Phonebook feature.
48
49
S e le c t in g Fu n c t io n s a n d Op t io n s
S e le c t in g Fu n c t io n s a n d Op t io n s
Example: Selecting an Alert Type
4. To select the Alert Type menu, press the Select
soft key.
1. When the idle screen is displayed, press the
Menu soft key to enter the menu facility.
The current setting is highlighted.
<SERVICE PROVIDER>
S a t 1 4 Ma r 1 2 : 5 7
1
2
3
Lig h t o n ly
[Melody
Vibrat ion
Current setting
]
Menu
PhoneBook
Select
2. Scroll through the menus until you reach the
5. Scroll through the list of alert types until the
appropriate one is highlighted, by pressing
Tones menu, by pressing
.
or
.
T o n e s
6. Press the Select soft key to confirm your
selection.
Select
3
7. Press the
key to exit the menu structure.
3. To select the Tones menu, press the Select soft
key and press
until you reach the Alert
Type.
Ale rt Type
Me lody
Select
3.4
50
51
Us in g t h e Me n u s
Using the Menus
The phone offers a range of functions that allow you
to tailor the phone to your needs. These functions are
arranged in menus and sub-menus.
Accessing Menu Functions by Using
Shortcuts
The menu items (menu, sub-menus and options) are
numbered and can be accessed quickly by using their
shortcut number. The shortcut number is shown in
The menus and sub-menus can be accessed by
scrolling or by using the shortcuts.
the bottom-right next to the
display.
soft key on the
Accessing Menu Functions by Scrolling
1. In idle mode, press the Menu soft key to access
1. In idle mode, press the Menu soft key to access
the menu facility.
the menu facility. Scroll with the
or
keys to reach the required main menu, such as
Tones. Press the Select soft key to enter the
menu.
2. Key in the first digit of the shortcut number.
Repeat this for each digit of the shortcut number.
2. If the menu contains any sub-menus, Ring Tone
Example: setting the Any-key Answer function
for example, you can access them by scrolling with
Press the Menu soft key, and key in
,
,
the
or
keys and pressing the Select
,
.
soft key.
If the menu you have selected contains further
options, repeat the same procedure.
Menu to enter the menu, 4 for Settings, 1 for
Phone Settings, 4 for Any-key Answer and 2 to
set the Any-key Answer option to ON.
3. To...
Scroll through the menus
Then press the...
Note:The numbers assigned to each menu option
are indicated in the list on page 54. They may
not match the menu number on the phone. It
depends on the services supported by the SIM
card.
or
keys.
Confirm the chosen setting Select soft key.
Return to the previous
menu level
soft key.
Exit the menu, without
changing the settings
key.
52
53
Us in g t h e Me n u s
Us in g t h e Me n u s
Menu Map
2. Messages
Page 62
The following illustration shows the menu structure
available and indicates the:
• Number assigned to each option
• Page on which you can find a description of each
feature
2-1 Voice Mail
2-1-1 Connect to Voice Mail
2-1-2 Voice Server Number
2-2 Read Messages
2-3 Write Messages
2-4 Preset Message List
2-5 Set Up
2-5-1 Service Centre
2-5-2 Default Type
2-5-3 Default Validity
2-5-4 Reply Path
2-5-5 Delivery Reports
2-6 Broadcast
Note: You can only see menu 0, if your SIM card
supports the SIM Application Toolkit. This is a
network feature. Please contact your service
provider for more information.
Page 59
1. Call Records
2-6-1 Read
2-6-2 Receive
2-6-3 Channel List
2-6-4 Language
1-1 Missed Calls
1-2 Received Calls
1-3 Dialled Calls
1-4 Call Time
2-7 Picture Messages
1-4-1 Last Call Time
1-4-2 Total Sent
1-4-3 Total Received
1-4-4 Reset Timers
Page 70
3. Tones
3-1 Ring Tone
1
1-5 Call Cost
3-2 Melody Composer
3-3 Ring Volume
3-4 Alert Type
1-5-1 Last Call Cost
1-5-2 Total Cost
1-5-3 Max Cost
3-5 Keypad Tone
3-6 Message Tone
3-7 Error Tone
3-8 Minute Minder
3-9 Connect Tone
1-5-4 Reset Counters
1-5-5 Set Max Cost
1-5-6 Price/Unit
1 Shown only if supported by your SIM card.
54
55
Us in g t h e Me n u s
Us in g t h e Me n u s
4. Settings
4. Settings (continued)
Page 76
4-1 Phone Settings
4-4 LCD Settings
4-1-1 Greeting Message
4-4-1 Screen Mode
4-1-2 Own Number 1
4-1-3 Language
4-4-2 Select Image
4-4-3 LCD Contrast
4-5 Browser Settings 2
4-1-3-1 Text Language
4-1-3-2 Input Mode
4-1-4 Any-key Answer
4-5-1 Proxy Settings
4-5-2 Current Proxy
4-1-5 Backlight
4-6 Service Colour
4-1-6 Service Light
4-1-7 Auto Redial
4-1-8 Auto Answer
4-1-9 Caller ID
4-1-0 Reset Settings
4-1-* Active Line 1
5. Organiser
Page 96
5-1 Scheduler
5-2 Alarm
4-2 Network Services
5-2-1 Daily Alarm
4-2-1 Call Diverting 2
4-2-2 Call Barring 2
5-2-2 Once Alarm
5-2-3 Weekly Alarm
5-2-4 Alarm Tone
4-2-3 Call Waiting 2
4-2-4 Network Selection
4-2-5 Line Identification 2
4-2-6 Closed User Group
5-3 Calculator
5-4 World Time
5-5 Clock
4-3 Security Settings
5-5-1 Set Time
4-3-1 PIN Check
5-5-2 Set Date
5-5-3 Format
4-3-2 Change PIN
4-3-3 Phone Lock
4-3-4 Change Password
4-3-5 SIM Lock
4-3-6 FDN Mode
4-3-7 Change PIN2 1
1
1 Shown only if supported by your SIM card.
2 May not be shown or supported by your network service provider.
56
57
Us in g t h e Me n u s
Call Records
6. Games
Page 104
Page 105
Via this menu, you can view the phone calls:
Using this menu you can enjoy
popular games with the phone.
• Missed
• Received
• Dialled
7. WWW Services
The number and name (if available) are displayed
together with the date and time at which the call
was made. You can also view call times and costs.
The WAP Browser feature may
vary, depending on the service provider.
Missed Calls
Menu 1-1
This option lets you view the last 10 unanswered
calls. You can also:
• Edit the number if available and dial it or save it
in the phonebook
• Delete the call from the list
Received Calls
Menu 1-2
This option lets you view the last 10 phone calls
received. You can also:
• Edit the number if available and dial it or save it
in the phonebook
• Delete the call from the list
58
59
Ca ll Re c o rd s
Ca ll Re c o rd s
Dialled Calls
Menu 1-3
Call Cost
Menu 1-5
Note: The options of this menu may vary, depending
This option lets you view the last 10 numbers dialled.
You can also:
on your SIM card.
• Edit the number and save it in the phonebook
• Redial the number
• Delete the number from the list
This network feature lets you view the cost of calls.
The following options are available.
Last Call Cost: cost of the last call made.
Total Cost: total cost of all calls made since the cost
counter was last reset. If the total cost exceeds the
maximum cost set via the Set Max Cost option, you
will no longer be able to make any calls, except calls
to the emergency services, until you reset the
counter.
Call Time
Menu 1-4
This option lets you view the timers for calls made
and received. The following timers are available.
Last Call Time: length of the last call.
Max Cost: maximum cost set via the Set Max
Cost option (see below).
Total Sent: total length of all calls made since the
timer was last reset.
Reset Counters: option used to reset the cost
counter; you must first enter your PIN2 (see
page 116) and then press the OK soft key.
Total Received: total length of all calls received
since the timer was last reset.
Reset Timers: option used to reset the call timers;
you must first enter the phone password (see
page 115) and then press the OK soft key.
Set Max Cost: option used to enter the maximum
cost that you authorise for your calls. You must first
enter your PIN2 (see page 116) and then press the
OK soft key.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes and so forth.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls. You must first enter your PIN2
(see page 116) and then press the OK soft key.
Note: AOC (Advice Of Charge) information may be
displayed in idle mode, depending on your SIM
card or service provider.
60
61
Me s s a g e s
Messages
Note:In idle mode, you can access your voice mail
Your phone receives voice mail notification messages
and Short Message Service (SMS) messages. Voice
mail and SMS are network services. Please contact
your service provider for more information.
server directly by holding down the
key.
Voice Server Number
You can change the voice mail server number.
When the
icon appears, you have received new
text messages. If the Alert type menu option (3-4) is
To...
Then press the...
set to Light only, the service light flashes orange.
Enter the server
number
Corresponding number
keys.
When the
mail. If the message memory is full, an error message
is displayed, the icon flashes and you cannot
icon appears, you have received voice
Recall a number in
the phonebook
PhoneBook soft key.
receive any new messages. Use the Delete option in
the Read Messages menu (2-2) to delete obsolete
messages.
Correct a digit
soft key.
Move the cursor to
the left/right without
clearing the digit
or
key.
Picture and ringing tone messages can also be received.
To...
Then use the...
Note: See page 41 for instructions on how to use the
Send or receive
picture messages
Picture Messages menu
option (2-7); see page 68.
phonebook.
Load ringing
tone messages
Ring Tone menu option (3-1);
see page 70.
Read Messages
Menu 2-2
When the Read Messages menu is selected, the
header of the first message is displayed:
• Message number
Voice Mail
Menu 2-1
This menu provides you with a quick way of accessing
your voice mailbox (if provided by your network).
• Message status (new, old, not sent, sent)
To view this message, press the View soft key. The
screen shows the:
• Sender’s phone number (if sent with the message)
• Date and time at which the message was
received
Connect to Voice Mail
Before using this feature, you must enter the voice
server number obtained from your service provider (see
the following page). You can then select this option and
simply press the OK soft key to listen to your messages.
• Message text
62
63
Me s s a g e s
Me s s a g e s
Write Messages
Menu 2-3
To scroll through the messages, press the
or
Via this menu, you can write and edit text messages
of up to 160 characters.
key. You can choose the following options, by
pressing the Options soft key.
1. Key in a message. For details on how to enter
text, refer to page 35.
Text Reply: allows you to reply by sending a text
message. You can also:
2. After you complete the message, you can select
the following options.
• Send the message
• Save and send the message
• Save but not send the message
Send Only: allows you to send the message
immediately. You can enter the required
destination.
Call back: allows you to call the sender back.
Edit: allows you to edit a message.
Save and Send: allows you to save a copy of the
message and then send the message to the
required destination. You can read the message
using the Read Messages option. When you
read the message, ‘Sent’ is displayed to indicate
the message state.
Delete: allows you to delete obsolete messages.
Cut Number: allows you to extract a number from
the message text, so that you can call the number or
save it in the phonebook.
Send: allows you to send a message that you have
not already sent.
Save Only: allows you to save the message so
that it can be sent later. When you read the
message, ‘Not sent’ is displayed.
Send again: allows you to resend a message that
you have already sent.
3. After selecting the required option, press the
Select soft key.
Note: The options available vary, depending on the
message status (new, old, not sent, sent).
The display prompts you to enter the destination
number.
4. Enter the phone number and press the OK soft
key.
64
65
Me s s a g e s
Me s s a g e s
Preset Message List
Menu 2-4
Default Type: allows you to set the default message
type (Text, Voice, Fax, X.400, Email, and ERMES). The
network can convert the messages into the selected
format.
Using this menu, you can preset up to five messages
that you use most frequently. This menu shows the
preset message list. Scroll through the list using
Default Validity: allows you to set the length of
time for which your text messages will be stored at
the SMS centre while attempts are made to deliver
them to you.
the
or
keys. When the required
message number appears, press the Options soft
key.
Possible values are one hour, 6 hours, 24 hours, one
week and the maximum authorised by your service
provider.
The following options are available.
Edit: allows you to write a new message or edit the
selected preset message.
Reply Path: allows the recipient of your SMS
message to send you a reply via your message
centre, if the service is provided by the network.
Note: For further information on how to enter text in
your message, refer to page 35.
Send Message: allows you to recall the selected
preset message. Once you have completed the
message, you can send, save and send, or simply save
it.
Delivery Report: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether or not
your message has been delivered.
Delete: allows you to delete the selected preset
message.
Broadcast
Menu 2-6
Set Up
Menu 2-5
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately they are
received, provided that:
Via this menu, you can set up default SMS
information.
•
•
•
The phone is in the idle mode
The Receive option is set to Enable
The message channel is currently active in the
channel list
Service Centre: allows you to store or change the
number of your SMS centre required when sending
text messages. You must obtain this number from
your service provider.
If the message is long, press the
one or more times.
or
keys
66
67
Me s s a g e s
Me s s a g e s
The following options are available.
The last five messages are also stored for later
retrieval. Please contact your service provider for
more information.
Write Message: allows you to write the text of the
picture message.
The following options are available.
Erase: deletes the picture message; Empty is
displayed instead of the title.
Read: lets you view the first message. Scroll through
the message using
or
. At the end of the
message, press the Next soft key to move to the
next message.
Send Message: allows you to enter the destination
phone number; you must then press the OK soft key
to send the picture message.
Receive: allows you to enable or disable the
reception of broadcast messages.
Cut Number: allows you to extract a number from
the picture message, so that you can call the number
or save it in the phonebook.
Channel List: lists all available channels. The
channels currently selected are indicated by an
asterisk ( ) beside the name. When you select one of
them, you can edit, enable, disable or delete the
channel.
The Enter Channel option allows you to add a new
channel to the channel list. Enter the appropriate
channel ID obtained from your service provider, and a
title for the channel.
*
Receiving a Picture Message
To view the image in the picture message, press the
View soft key.
To toggle between the text and image, press the
right soft key.
The following options are available.
Language: allows you to select your preferred
language to be used when displaying cell broadcast
messages.
Save: allows you to save the picture message to
your picture message list.
Discard: allows you to discard the picture message
without saving it.
Picture Messages
Menu 2-7
Cut Number: allows you to extract a number from
the picture message, so that you can call the number
or save it in the phonebook.
You can send and receive picture messages via this
menu. When you select a picture message, you can
view the text or image by pressing the right soft key.
Note: This function is available between phones
supporting Nokia’s* Smart Messaging
services.
* Nokia is a registered trademark of Nokia Corporation.
68
69
To n e s
Tones
If your SIMcard supports the ALS feature, this option
also allows you to select a different ringing tone for
each line, and thus distinguish incoming calls.
You can use the Tones menu to customise various
sound settings, such as the:
Melody Composer
Menu 3-2
• Ringing tone or melody, volume and type
• Sounds made when you press a key, make an error
or receive a message
This option allows you to compose your own melody
to be used as the ringing tone.
• Three octaves are available.
Note: The Silent mode allows you to turn the various
• A maximum of 100 notes can be entered.
• You can adjust the length of the notes and add
rests, as required.
tones off when discretion is required. Press
and hold down the
key to toggle between
activating and deactivating the Silent mode.
Composing a Melody
Ring Tone
Menu 3-1
1. When you access the menu, the names of any
melodies created are displayed. Otherwise,
(Empty) appears. Select the melody that you wish
to create or edit.
This option allows you to select the required ringing
tone. You can choose between 20 different tones. Each
time you select a tone, it is played for a few seconds.
2. Press the Select soft key and compose your
melody using the following keys.
Three additional ringing tones can be created from
any ringing tone messages that you have received.
When you receive a ringing tone message, proceed as
follows.
To...
Then press the...
Enter C, the first note
in the musical scale
key.
1. To listen to the tone, press the Play soft key.
Enter D
key.
2. Press the Save soft key.
Enter E
Enter F
Enter G
key.
key.
key.
3. Select one of the ringing tone locations and
press the OK soft key.
4. To use this tone as the ringing tone, press the Yes
soft key. Otherwise No soft key.
Enter A
Enter B
key.
key.
key.
Two additional options correspond to the melodies
that you can compose, using the Melody Composer
menu option (3-2).
Move a note up or
down one octave
70
71
To n e s
To n e s
Deleting a Melody
1. Select the melody that you wish to delete.
To...
Then press the...
key (press the key
until the rest is of the
required length).
Enter a rest
2. Press and hold
for a few seconds.
All notes are erased.
Delete notes
key.
3. Press the Listen soft key. You are asked to
confirm that you wish to delete the melody by
pressing the Yes soft key.
Move a note a
semitone up or down
or
key (for
example, the note A
changes to A#, B, C, C#,
and so on in the scale
each time you press
Ring Volume
Menu 3-3
the
key).
This option allows you to adjust the ringing volume
to one of five levels.
Change the length
of a note
key (the length
will be changed each
Use the
or
keys. The greater the
time you press the key)
Listen soft key.
key.
.
number of bars, the greater the volume level.
Listen to your melody
Cancel your changes
Alert Type
Menu 3-4
3. When you are satisfied with your melody, press
the Yes soft key.
This option allows you to indicate how you are to be
informed of any incoming calls. The following options
are available.
4. Enter a title for the melody.
Note: For further details on how to enter
characters, refer to page 35.
Light only: only the backlight is switched on; the
phone neither rings nor vibrates.
You are asked if the melody is to become the
ringing tone.
Melody: the phone rings using the ringing tone
selected via menu option 3-1.
5. To use the melody as the ringing tone, press the
Yes soft key.
Vibration: the phone vibrates but does not ring.
The melody is saved and is played each time your
phone rings. You can also select the melodies
composed via the Ring Tone menu option (3-1).
Vibra+Melody: the phone both rings and vibrates.
72
73
To n e s
To n e s
Keypad Tone
Menu 3-5
Error Tone
Menu 3-7
This option allows you to select the tone that the
keypad generates when you press a key. The
following options are available.
This option allows you to select how the phone
informs you that you have made a mistake. The
following options are available.
OFF: the keys do not make any sound.
OFF: the phone does not beep.
Tone: each key, when pressed, makes a different
ON: the phone beeps to indicate an invalid entry.
sound.
Beep: each key, when pressed, makes the same
sound.
Minute Minder
Menu 3-8
This option allows you to specify whether the phone
must beep every minute during an outgoing call to
keep you informed of the length of your call. The
following options are available.
Message Tone
Menu 3-6
This option allows you to select how the phone
informs you that a new message has been received.
The following options are available.
OFF: the phone does not beep.
ON: the phone beeps every minute.
SMS Tone1 ~ SMS Tone10: the phone uses an
SMS tone. You are provided with ten SMS tones.
Connect Tone
Menu 3-9
Single Beep: the phone beeps once.
Light Only: the service light on the top of the phone
flashes orange.
This option allows you to specify whether the phone
should beep when the phone connects to the
network. The following options are available.
OFF: the phone does not beep.
ON: the phone beeps when your call is accepted.
74
75
Settings
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed via the Settings menu.
Phone Settings
Menu 4-1
Greeting Message
This option allows you to set a greeting message to
be displayed briefly when the phone is switched on.
The current message is displayed.
To...
Then press the...
Clear the existing
message
key and hold it
down until the message
is cleared.
Enter a new message
Appropriate
alphanumeric keys.
For more information on how to enter characters,
refer to page 35.
To go back to the previous menu level without saving
your input, press
.
76
S e t t in g s
Own Number
Note: The contents of this menu may vary,
depending on the SIM card.
You can enter your own name and number using this
menu. If you have subscribed to the Alternate Line
Service, you can select a line with
or
.
The following options are available.
Edit: allows you to edit the name and number.
Erase: allows you to erase the name and number.
Language
You can select the text language. When the
language option is set to Automatic, the language
is automatically selected according to the language
of the SIM card used.
You can also set the default text input mode. For
details on the text input modes available, refer to
page 35.
77
S e t t in g s
S e t t in g s
Any-key Answer
Service Light
Depending on the setting of the Any-key Answer
option, you can answer an incoming call by pressing
This option allows you to select whether or not the
service light on the top of the phone is used. The
following options are available.
any key, except
and the Reject soft key.
To reject the call, press
or the Reject soft key.
ON: the service light flashes when the phone is
ready for use.
The following options are available.
ON: you can press any key, except
and Reject.
OFF: the service light is not used.
OFF: you can only press
or the Accept soft key.
Auto Redial
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
Backlight
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off. The
following options are available.
Note: The interval between two call attempts varies.
The following options are available.
ON: the number is redialled automatically.
OFF: the number is not redialled.
Short: the backlight comes on when you press a key
or receive a call and switches off 10 seconds after
the last key is pressed.
Long: the backlight comes on when you press a key
or receive a call and switches off 20 seconds after
the last key is pressed.
Auto Answer
With the Auto Answer function, the phone auto-
matically answers calls after 3, 5 or 10 seconds. You
can also turn this feature off.
OFF: the backlight is not used.
Note: This feature is only available when the phone
is connected to a car kit (optional).
78
79
S e t t in g s
S e t t in g s
Caller ID
Active Line
Some SIM cards may be used with two subscriber
numbers (network service). This function is available
only if your SIM card supports it.
You can prevent your phone number from being
displayed on the phone of the person being called.
Note: Some networks do not allow the user to
change this setting.
This menu allows you to select the line to be used
when making calls. However, calls can be answered
on both lines, regardless of the line selected. When
you select a line, the line number appears as an
indicator after the operator/service provider’s names.
The following options are available.
Default: the default setting provided by the network
is used.
Hide Number: your number is not displayed on the
other person’s phone.
When you select the Manual option, you can choose
a line whenever you access the call barring, diverting
and waiting features; the active line is not displayed.
Send Number: your number is sent each time you
make a call.
Network Services
Menu 4-2
Reset Settings
You can easily reset your phone to its default
configuration. To do so, proceed as follows.
These menu functions are network services.
Please contact your service provider to check their
availability and subscribe to them, if you so wish.
1. Select the Reset Settings menu option.
2. Enter the 4-digit phone password.
Note: The password is preset to 0000. To change this
password, refer to page 92.
80
81
S e t t in g s
S e t t in g s
Example: You can:
Call Diverting
• Systematically divert fax calls to your
office fax machine
• Divert voice calls to your colleague if
you are already using the phone
Note: Some call divert options may not be shown if
they are not supported by your network
operator.
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to divert your business calls
to a colleague while you are on holiday.
To set your call diverting options, proceed as follows.
1. Select the type of call diverting required by
pressing
or
until the appropriate
option is highlighted, and then press the Select
soft key.
Call diverting can be set up in the following ways.
Divert Always: all calls are diverted.
2. Select the type of calls to be diverted by
pressing
or
until the appropriate
Busy: calls are diverted if you are already on the
phone.
option is highlighted and then press the Select
soft key.
No Reply: calls are diverted if you do not answer the
phone.
3. Press the Activate soft key to confirm your settings.
4. Enter the number to which the calls are to be
diverted.
Unreachable: calls are diverted if you are not in an
area covered by your service provider.
To enter the international code, press 0 until the
+ sign is displayed. You can also select a number
in the phonebook or the voice server number, by
pressing the Options soft key, followed by
PhoneBook or Voice Server Number.
Unavailable: calls are diverted if you are busy, do not
answer or cannot be reached.
Cancel All: all call diverting options are cancelled.
5. When you are satisfied, press
key.
or the OK soft
Note: These options may be different, depending on
the SIM card.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can specify individual diverting options for each of
the following call types:
• Voice calls only
To deactivate specific call diverting settings, proceed
as follows.
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in use)
1. Select the call diverting option to be deactivated.
2. Select the type of call to which this option applies.
82
83
S e t t in g s
S e t t in g s
3. Press the Remove soft key.
To set your call barring options, proceed as follows.
1. Select the type of call barring required by pressing
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
the
or
key until the appropriate
option is highlighted and then press the Select
soft key.
You can also deactivate all call diverting settings by
selecting the Cancel All option.
2. Select the type of calls to be barred by pressing
Note: When all calls are diverted, one of the
indicators below is displayed on the last line of
the display, if supported by your SIM card.
the
or
key until the appropriate
option is highlighted and then press the Select
soft key.
Divert Line 1: all calls from line 1 are diverted.
Divert Line 2: all calls from line 2 are diverted.
Divert All: all calls from lines 1 and 2 are
diverted.
3. Press the Activate soft key to confirm your
settings.
4. Enter your call barring password supplied by your
service provider.
Call Barring
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
The call barring network service allows you to
restrict your calls.
To deactivate specific call barring settings, proceed
as follows.
Call barring can be set up in the following ways.
All outgoing: calls cannot be made.
1. Select the call barring option to be deactivated.
2. Select the type of call to which this option applies.
3. Press the Remove soft key.
International: international calls cannot be made.
International except to home: when abroad, calls
can be made only to numbers within the current
country and to your home country, that is the country
where your home network provider is located.
4. Enter your call barring password supplied by your
service provider.
All Incoming: calls cannot be received.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
Incoming while abroad: calls cannot be received
when you are using your phone outside your home
service area.
You can also deactivate all call barring settings by
selecting the Cancel All option.
Cancel All: all call barring settings are deactivated;
calls can be made and received normally.
84
85
S e t t in g s
S e t t in g s
Change Barring Password: you can set and change
the call barring password obtained from your service
provider using this option. You must enter the current
password before you can specify a new one.
Network Selection
The Network Selection feature enables you to:
• Indicate whether the network used when roaming
(outside your home area) is selected automatically
or manually
• Set up a preferred list to be used when selecting
a network automatically
Once you have entered a new password, you are asked
to confirm it by entering it again.
Note: You can select a network other than your
home network if it has a valid roaming
agreement with your home network.
Call Waiting
This network service enables you to be informed when
someone is trying to reach you during another call.
To indicate whether the network is to be selected
automatically or manually when roaming, proceed as
follows.
To set your call waiting options, proceed as follows.
1. Select the type of calls to which the call waiting
1. When Network Select is displayed, press the
option is to be applied by pressing
until the appropriate option is highlighted and then
or
Select soft key.
press the Select soft key.
2. Press
or
until the appropriate option
is highlighted and press the OK soft key.
2. Press the Activate soft key to confirm your settings.
If you select Automatic, you are connected to the
first available network in the preferred list when
roaming.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
To deactivate specific call waiting settings, proceed as
follows.
If you select Manual, the phone scans for the
available networks. Go to Step 3.
1. Select the type of call to which the option applies.
3. Press
or
until the preferred network
is highlighted and press the OK soft key.
2. Press the Deactivate soft key.
You are connected to that network when roaming.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all call waiting settings by
selecting the Cancel All option.
86
87
S e t t in g s
S e t t in g s
Preferred List: allows you to list your preferred
networks to be used when roaming. Your phone uses
the networks in order of appearance in this list,
provided that the network is available.
CLIR (Calling Line Identification Restriction) /
COLR (Connected Line Identification Restriction)
If these network functions are active, your phone
number is not displayed on the called person’s phone.
When you select this option, the current preferred
list is displayed if it already exists (see the procedure
below). Otherwise, the list of available networks is
displayed directly (see Step 2).
Closed User Group (CUG)
This network service allows incoming and outgoing
calls to be restricted to a selected user group. You
may be a member of up to 10 user groups.
For details on how to create, activate and use a
closed user group, contact your service provider.
1. To...
Scroll through
Then press the...
or
key.
the preferred list
Change an entry in
the preferred list light the required entry,
or
key to high-
Example: A company lends SIM cards to its
employees and wants to restrict outgoing
calls to members of the same team.
followed by the Edit soft key.
2. Select the network to be added to the list by
If you select the Closed User Group menu, you are
asked if you wish to activate the CUG function. Press
the Yes soft key. You can now access the following
options.
pressing
or
until it is highlighted,
followed by the Select soft key.
The network is added to the list.
Deactivate: deactivates the CUG function.
Line Identification
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears.
Add a new CUG index (as advised by your service
provider) or delete a selected group.
This option allows you to view the following line
identification settings.
CLIP (Calling Line Identification Presentation) /
COLP (Connected Line Identification Presentation)
If these network functions are active, the caller’s
number is displayed during a call. If the phone
number matches one stored in the phonebook, the
caller’s name is also displayed.
88
89
S e t t in g s
S e t t in g s
To...
Then press the...
or key.
PIN Check
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Scroll through the
existing CUG indexes
Add a new CUG index Options soft key, select
Add and enter the index.
Note: Before disabling the PIN Check feature, you
Delete a CUG index
or
key to select
must enter your PIN.
the index to be deleted,
press the Options soft key
and select Delete.
The following options are available.
Enable: you must enter the PIN each time the phone
is switched on.
Outside Access: enables you to allow or prohibit
calls to numbers other than those nominated for the
Closed User Group. This feature depends on the
nature of your CUG subscription. Please check with
your service provider.
Disable: the phone connects directly to the network
when you switch it on.
Change PIN
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature is
enabled. You must enter the current PIN before you
can specify a new one.
Default Group: you may communicate a default
CUG to your service provider. If you have done so,
you can enable the Default Group option on your
phone. When making a call, you will be given the
option of using your default CUG, instead of
selecting one from the list.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone Lock
Security Settings
Menu 4-3
When the Phone Lock feature is enabled, the phone
is locked and you must enter the phone password
each time the phone is switched on.
The Security feature enables you to restrict the use
of your phone to:
• The people of your choice
• The types of calls of your choice
The password is factory set to 0000. To change the
phone password, refer to the Change Password
menu option (4-3-4).
Once the correct password has been entered, you
can use the phone until you switch it off.
Various codes and passwords are used to protect the
features of your phone. They are described in the
following sections (also see page 115).
90
91
S e t t in g s
S e t t in g s
The following options are available.
The following options are available.
Enable: you can only call phone numbers stored in
Enable: you are required to enter the phone
the phonebook. You must enter your PIN2.
password when you switch the phone on.
Disable: you can call any number.
Disable: you are not asked to enter the phone
password when you switch the phone on.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
Change Password
Change PIN2
The Change Password feature allows you to change
your current phone password to a new one. You must
enter the current password before you can specify a
new one.
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked to
confirm it by entering it again.
The password is factory set to 0000. Once you have
entered a new password of up to 4 digits, you are
asked to confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
SIM Lock
LCD Settings
Menu 4-4
When the SIM Lock feature is enabled, your phone
only works with the current SIM.
The LCD Settings menu enables you to set the style
of the LCD display.
Once you have entered the lock code, you are asked
to confirm it by entering it again.
Screen Mode
To unlock the SIM, you must enter the SIM lock code.
You can select the screen image to be displayed in
idle mode.
FDN Mode
Normal Mode: the LCD displays <Service
Provider> and the current time and date.
The FDN(Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
Image Display: the LCD displays the image selected
via the Select Image option for a period of
15 seconds after the last key is pressed. When the
image is displayed, press any key to return to the
normal mode.
92
93
S e t t in g s
S e t t in g s
Clock: the LCD displays an analogue clock for a
period of 15 seconds after the last key is pressed.
When the clock is displayed, press any key to return
to the normal mode.
Proxy Name: name of the proxy server.
WDP Address: IP address required to connect to
the Internet.
Note: When you select the Image display and Clock
mode, the keypad lock icon ( ) is not displayed. If
nothing happens when you press the keys, activate
the keypad by pressing and holding down the
key.
Port Number: number of the port to be used to
connect the gateway.
Home URL: URL of your home Web site.
Access Point
Select Image
• NAS Phone Number: PPP server phone number.
• Login Name: PPPserver login ID (may be optional).
• Password: PPP server password (may be optional).
This option allows you to select the image to be
displayed when you set the Screen Mode option to
Image Display. You can select one of five images
(Image 1 ~ 5).
• Network Type: V.32 Transparent, V.32 Non-
Transparent, V.110 Transparent or V.110 Non-
Transparent.
LCD Contrast
This option allows you to adjust the contrast of the
LCD screen. Press
to increase or
to
decrease the contrast.
Service Colour
Menu 4-6
Browser Settings
Menu 4-5
There are five colours available for the service light:
normal (green), orange, red, violet and blue.
You can scroll through these colours, by pressing the
Note: This menu may not be shown, depending on
your network service provider.
or
key. Press the Select soft key to
select the required colour.
You can set up several proxies, using the Proxy
Settings menu (4-5-1), and you can designate one
as the current proxy, using the Current Proxy menu
option (4-5-2). The following parameters must be set
for each proxy; they may vary depending on your
service provider. Contact your service provider for
further details.
94
95
Org a n is e r
Organiser
To schedule a new event, proceed as follows.
The Organiser feature enables you to:
• Write your schedule
• Set the alarm so that the phone rings at a specific
time (to remind you of an appointment for
example)
1. When the calendar is displayed, use the
keys to select the month, the
and
and
and
keys to select the week and the
keys to select the day. You can also use the
Go to date menu option to specify the date.
• Calculate
• Find out what time it is in various cities around
the world
Note: To exit the calendar, press
. The phone
• Set the current date and time
returns to the previous menu level.
2. Press the OK soft key.
Scheduler
Menu 5-1
3. Select a schedule type. Four types are available.
Reminder: requires a description and the time.
Call: requires a phone number and the time.
Meeting: requires a description and the time.
Birthday: requires a name and the time.
The Scheduler helps you to keep track of reminders,
calls that you need to make, meetings and birthdays.
The phone alarm rings when the date set for a
birthday, reminder or call is reached.
4. Enter the appropriate information, referring to
page 35 for further details on how to enter text if
necessary.
When you access the Scheduler menu, the
following options are available.
Go to date: allows you to enter a particular date and
schedule an event on that date.
5. If you wish to set the alarm to ring on the
scheduled date and time, select Yes. Otherwise,
select No.
View All: shows the events scheduled.
Delete All: deletes all scheduled events.
6. If you selected Yes, set the time for the alarm and
press OK.
A date that has a schedule already associated is
displayed in bold. If you select such a date, you will
see the contents.
96
97
Org a n is e r
Org a n is e r
To set the alarm, proceed as follows.
Note: If you have scheduled more than one event on
1. Select an alarm type by pressing the Select soft
key.
a given day, you can scroll to the required
event by pressing
or
.
The Set Alarm option allows you to set the alarm
time or days of the week.
The following options are available.
Add: allows you to add new contents.
2. If you choose Weekly Alarm, select the required
day of the week and press
.
Delete: deletes the scheduled event.
The symbol appears to indicate that the day is
*
Move: moves the scheduled event to a new date.
selected.
To remove it, press
You can set more than one day.
.
Copy: copies the scheduled event to a new date.
Delete Day: deletes all events scheduled on that
3. Press the OK soft key.
date.
4. Enter the required time, then press the OK soft
key.
Alarm
Menu 5-2
Alarm Activated is displayed.
This option allows you to set the alarm to ring at a
specific time. You can set one or more alarms.
The following alarms are available.
The alarm icon ( ) appears in the top line of the
display. The service light flashes in white when the
alarm rings. To stop the alarm when it rings, press
any key.
Daily Alarm: the alarm rings every day at the same
time.
To deactivate the alarm, select Remove Alarm.
Once Alarm: the alarm rings only once and is then
deactivated.
Note:If no battery is attached to the phone or the
battery is discharged, when the alarm is to
ring, the alarm does not ring.
Weekly Alarm: the alarm rings every week on the
same day and at the same time.
The Alarm Tone option allows you to select a
specific tone for the alarm.
98
99
Org a n is e r
Org a n is e r
Examples:
Expression
Calculator
Menu 5-3
Key Sequence
Result
You can use the phone as a 9-digit calculator. The
calculator provides the basic arithmetic functions:
addition, subtraction, multiplication, division,
percentages.
12*3+5=
12x3+5
(or
(or
(or
(or
(or
(or
(or
(or
(or
)
)
)
)
)
)
)
)
)
41
34+57=
34+57
45
91
102
25
45+57=
48-23=
48-23
14
To use the calculator, proceed as follows.
14-23=
-9
1. Enter the first number using the number keys.
68*25=
68x25
40
1700
2720
2.5
7
68*40=
2. Press the Operator soft key until you find the
appropriate arithmetic symbol: + (add),
- (subtract), x (multiply), / (divide).
35/14=
35/14
98
98/14=
10% of 200
10=? % of 100
200x10
10/100
20
10
3. Enter the second number.
4. Repeat Steps 2 and 3 if necessary.
10% premium of 200 200+10
10% discount of 200 200-10
220
180
5. To calculate the result to two decimal places,
square of 4
4x
8/
(or
(or
)
)
16
press the Equal soft key or the
key.
reciprocal of 8
0.12
To erase any mistakes or clear the display, press
the key.
Note: When you have finished with the calculator,
press to return to the previous menu level.
To enter a decimal point, press the
key.
100
101
Org a n is e r
Org a n is e r
World Time
Menu 5-4
Clock
Menu 5-5
You can use your phone to check the current time in
21 major cities around the world. Scroll through the
Set Time
cities using the
The screen shows the:
• City name
or
key.
This option allows you to change the time displayed,
using the 24-hour system.
Note: Before setting the time, you must specify your
• Current date and time
time zone, via the World Time menu option (5-4).
• Time difference between the selected city and
your city if you have set the local time (see below
for further details) or GMT (by default)
Set Date
This option allows you to change the date displayed.
Enter the day, month and year, using the format
specified in the option below.
To select the time zone in which you are located,
proceed as follows.
1. Select the city corresponding to your time zone by
Format
pressing the
times.
or
keys one or more
This option allows you to select the date format:
• DD/MM/YYYY (day, month, year)
• MM/DD/YYYY (month, day, year)
The local date and time are displayed.
2. Press the Set soft key.
3. To...
Update the current
Then press the...
Set Local soft key.
date/time with this
new setting
Indicate that the
Set DST soft key.
time zone is currently A check mark is shown
using the daylight
saving time
next to the time
difference.
Indicate that the
Remove DST soft key
time zone is no longer (only available when a
using the daylight
saving time
check mark is shown
next to the time
difference).
102
103
WWW Services
Games
Using this menu you can also enjoy popular games
on the phone.
You can use your phone as a Web Browser.
You can obtain up-to-date news, weather, sport, and
other information as well as use e-mail and other
Internet services.
Scroll to the chosen game and press the Select soft
key.
Please contact your service provider to open your
Internet account. To use the Web Browser, you must
indicate your phone number via the Own Number
menu option (4-1-2).
The following options are available.
Play: allows you to start a game.
Level: appears whenever you can select the level of
the game. You can scan the levels available with
the
key.
or
key, and then press the OK soft
Launching the Browser
To launch the browser from the idle mode, press
Configuration: allows you to adjust phone settings,
such as the backlight and sound.
the
key or press the Menu soft key, followed
and keys.
by the
To adjust each setting, highlight the Backlight or
Sound option by pressing the
and then toggle between ON and OFF by pressing
the On/Off soft key.
or
key
Once connected, the home page (or the last page
visited) is displayed. The content depends on the
service provider.
Instructions: gives you an explanation of how to
play the game.
You can scroll up or down with the
Exiting the Browser
or
key.
High Score: shows you the game’s high score list.
To exit the browser at any time, press the
The idle screen is displayed.
key.
To stop playing a game, press the
key.
Using Local Bookmarks
If you record a high score for a given game, the
phone displays the High Score screen when the
game is over.
You can store the addresses of up to five Internet
sites for easy access using the Bookmark feature.
104
105
WWW S e rv ic e s
WWW S e rv ic e s
Navigating with the WAP Browser
You can surf the Internet using either the phone keys
or the WAP Browser menu.
To access the Bookmark feature, proceed as follows.
1. In idle mode, press the Menu soft key.
2. Press
3. Press
for WWW Services.
Using the Phone Keys
for Bookmark.
When surfing the Internet, the phone keys function
differently from the phone mode.
4. Highlight the required bookmark using the
or key and press the Select soft key.
To...
Then press the...
5. Press the Options soft key.
Scroll each line of the
content area
or
key.
Three options are available.
Edit: allows you to create or edit a local bookmark.
1. Enter the required title (up to 16 characters).
2. Press the OK soft key.
Return to the previous
page
key (except on the
homepage).
Return to the startup
homepage
key and hold it
down anywhere.
3. Enter the URL address (up to 128 characters).
4. Press the OK soft key.
Using the WAP Browser Menu
Go: allows you to open the selected page.
Delete: allows you to delete the selected bookmark.
There are various menu options available when
surfing the Wireless Web.
To access the WAP Browser menu, proceed as
follows.
Opening a Page Directly
1. Press
.
You can open any Web page by entering its URL
address.
A list of menu options appears.
To enter the URL address directly, proceed as follows.
2. Highlight the required option using the
key.
or
1. In idle mode, press the Menu soft key.
2. Press
3. Press
for WWW Services.
3. Press the OK soft key to select the option.
for Goto.
4. If necessary, select the secondary option by
4. Enter the URL address and press the Go soft key.
pressing the
or
key, followed by OK.
106
107
WWW S e rv ic e s
WWW S e rv ic e s
Note: The WAP Browser menus may vary,
Entering Text, Numbers, or Symbols
depending on your version of the browser.
When you are prompted to enter text, the current
text entry mode appears above the right soft key:
abc/Abc/ABC, NUM or SYM 1 ~ 4. To change modes,
press the right soft key until the required mode is
displayed.
The following options are available.
Reload: reloads the current page.
Home: takes you back at any time to the homepage
of the Wireless Web service provider.
abc/Abc/ABC: allows you to enter lower-case and
upper-case letters. You can switch between lower-
Bookmarks: allows you to load a bookmarked Web
page directly.
and upper-case letters by pressing the
key.
Mark Site: adds the current page to your bookmark
list.
SYM1 ~ 4: allows you to enter various symbols and
punctuation marks. To view more symbols, press the
More soft key.
About Phone.com: shows the version of the WAP
Browser.
NUM: allows you to enter numbers.
Advanced...: gives you access to the following
advanced features. Some features may not be
supported by your network operator.
If you wish to edit text, move the cursor to the
required position, using the
clear the wrong letter by pressing the
Then enter the correct letter.
or
keys and
key.
Show URL: shows the URL of the current page.
HomePage: moves to the homepage.
Network Connection Information
Offline Services: allows you to copy and save Web
pages so that you can view them, even if the network
is down.
To check the network connection time, press and
hold down the key. You can see the
connection time on the last line of the content area.
The linger time is one or more minutes (depending
on your service provider). Consequently, if you do not
use the browser for one or more minutes, the
network is disconnected automatically. In this case,
you can see that the connection time is stopped at
that point.
Outbox: stores outgoing requests from the browser
so that they can be processed at a later date.
Restart Up.Browser: clears the cache memory and
displays the homepage.
Encryption: allows you to check and generate the
security key required to contact a server.
The connection time is reset whenever you exit the
browser.
108
109
Ad d it io n a l S e rv ic e s
Additional Services
ALS (Alternate Line Service)
3. Setting the Ring Type
Note: Please contact your service provider to check
the availability of this feature and how to
subscribe to it.
To distinguish between incoming calls on the two
lines, you can select a different ring tone for each line
with the Ring Tone menu option (3-1). See page 70
for further details.
The ALS feature enables two lines to be associated
with one SIM card. Consequently, you can make and
receive calls on either line as required. If you
subscribe to this network service, a few additional
menu options enable you to set up this feature.
4. Setting Call Diverting Options
You can set up call diverting options for each line, via
the Call Diverting menu option (4-2-1). This service
enables you to divert calls received on a given line to
the number specified. See page 82 for further details.
1. Selecting a Line
With the Active Line menu option (4-1- ), you can
*
set a line to be used automatically when you make a
call or you can select the line manually for each call.
For further details, refer to page 81.
2. Editing the Line Name
You can edit the name of each line via the Own
Number menu option (4-1-2).
When you edit the name of a line, the name is
displayed, whenever necessary, instead of “Line 1” or
“Line 2”. For further details, refer to page 77.
110
111
S o lv in g P ro b le m s
Solving Problems
Before contacting the after-sales service, perform the
following simple checks. They may save you the time
and expense of an unnecessary service call.
“No service” is displayed
• The network connection was lost. You may be in a
weak reception area (in a tunnel or surrounded by
buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
When you switch your phone on, the following
messages appear
Insert SIM Card
• Check that the SIM card is correctly installed.
• This phone requires a 3 V SIM card. Please contact
your service provider if you experience any
problems.
You have entered a number but it was not dialled
• Have you pressed
?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Phone Locked
Your correspondent cannot reach you
• Is your phone switched on (
than one second)?
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
pressed for more
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
• The option requiring that the PIN be entered each
time the phone is switched on has been enabled.
You must enter your PIN and then disable this
option if so required.
Your correspondent cannot hear you speaking
• Have you switched off the microphone
(
appears)?
• Are you holding the phone close enough to your
mouth? The microphone is located in the bottom
centre of the phone.
Enter PUK
• The PIN code was entered wrongly three times in
succession and the phone is now blocked. Enter
the PUK supplied by your network operator.
112
113
S o lv in g P ro b le m s
Reference Information
The phone starts beeping and “** Warning **
Battery Low” flashes in the display
Access Codes
• The battery is insufficiently charged. Replace the
battery with a charged one and recharge it.
There are several access codes that are used by your
phone and its SIM card. These codes help you protect
the phone against unauthorised use.
The audio quality of the call is poor
• Check the signal strength indicator in the display
( ); the number of bars after it indicates the
The access codes (except for the PUK and PUK2
codes) can be changed using the Security Settings
menu options (4-3). See page 90 for further details.
signal strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
Phone Password
The phone password can be set to avoid unauthorised
use of the phone. The password generally supplied
with the phone is 0000. You are advised to change it
before you start using your phone.
No number is dialled when you recall a
phonebook entry
• Check that the numbers have been stored
correctly, by using the Phonebook Search feature.
• Re-store them, if necessary.
Keep the new password secret and in a safe place,
separate from the phone.
If the above guidelines do not enable you to solve
the problem, take a note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or SAMSUNG
after-sales service.
114
115
Re f e re n c e In f o rm a t io n
Re f e re n c e In f o rm a t io n
PUK
PIN
The PUK (Personal Unblocking Key) is required to
change a blocked PIN. The PUK may be supplied with
the SIM card. If not, contact your local service
provider.
The PIN (Personal Identification Number) protects
your SIM card against unauthorised use. The PIN is
usually supplied with the SIMcard. When the PIN
Check feature is enabled (menu option 4-3-1), the
PIN is needed each time the phone is switched on.
If you key in an incorrect PUKten times in
succession, the SIM card cannot be used anymore.
Contact your service provider for a new card.
If you key in an incorrect PIN three times in
succession, key in the PUK and press the OK soft key
Key in a new PIN and press the OK soft key. Key in
the new PIN again and press the OK soft key.
.
You cannot change the PUK. If you lose it, contact
your service provider.
PIN2
PUK2
The PIN2, supplied with some SIM cards, is required
to access specific functions, such as call cost
counters. These functions are only available if
supported by your SIM card.
The PUK2, supplied with some SIM cards, is required
to change a blocked PIN2.
If you key in an incorrect PUK2ten times in
succession, you cannot use the functions requiring
the PIN2. Contact your service provider for a new
card.
If you key in an incorrect PIN2 three times in
succession, key in the PUK2 and press the OK soft
key. Key in a new PIN2 and press the OK soft key.
Key in the new PIN2 again and press the OK soft
key.
You cannot change the PUK2. If you lose it, contact
your service provider.
Barring Password
The 4-digit barring password is required when you use
the Call Barring function. You obtain the password
from your service provider when you subscribe to this
function.
116
117
Re f e re n c e In f o rm a t io n
Re f e re n c e In f o rm a t io n
Using the Batteries
• Use only Samsung-approved batteries and
Your phone is powered by a rechargeable Li-ion
standard battery.
recharge your battery only with Samsung-approved
chargers. When a charger is not in use, disconnect
it from the power source. Do not leave the battery
connected to a charger for more than a week,
since overcharging may shorten its life.
Precautions When Using Batteries
• Never use any charger or battery that is damaged
in any way.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby times
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and life-time of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Battery charging times depend on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time
to buy a new battery.
• Do not short-circuit the battery. Accidental short
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the back of the battery), for example when
you carry a spare battery in a pocket or bag.
Short-circuiting the terminals may damage the
battery or the object causing the short-circuit.
• If left unused, a fully charged battery will
discharge itself over time.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
118
119
Re f e re n c e In f o rm a t io n
Re f e re n c e In f o rm a t io n
Operating Environment
Safety Information
• Remember to follow any special regulations in
force in any area and always switch off your
phone whenever it is forbidden to use it, or when
it may cause interference or danger (in a hospital
for example).
Road Safety
• Remember, road safety always comes first!
• Do not use a hand-held phone while driving a
vehicle. Always park the vehicle before having a
conversation.
• Operation of any radio transmitting equipment,
including cellular phones, may interfere with
inadequately protected medical devices. Consult
a doctor or the manufacturer of the medical
device if you have any questions. Other electronic
equipment may also be subject to interference.
• Make sure that the phone is stored safely and will
not fall or be broken in the event of a collision or
emergency stop.
• The use of an alert device to operate a vehicle’s
lights or horn on public roads is not permitted.
• As with other mobile radio transmitting equipment,
you are advised that for satisfactory operations
and personal safety, the equipment should only be
used in the normal operating position.
• Only qualified personnel should install or service
the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the unit.
• The effect of the GSM transmit/duty cycle on
hearing aids and pacemakers is being
investigated, and there is a potential hazard
associated with use close to such personal
medical electronic devices.
• Electronic fuel injection, anti-skid braking,
electronic cruise control or any other electronic
systems may malfunction due to the lack of
protection from radio signals. Check regularly that
all cellular phone equipment in your vehicle is
mounted and operating correctly.
• Always switch off the phone when at a refuelling
point (service station). You are reminded of the
need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and
distribution areas), chemical plants or where
blasting operations are in progress.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
120
121
Re f e re n c e In f o rm a t io n
Re f e re n c e In f o rm a t io n
• Switch off your cellular phone when in aircraft.
The use of cellular phones in aircraft is illegal and
may be dangerous to the operation of the aircraft
or disrupt the cellular network. Failure to observe
these instructions may lead to the suspension or
denial of cellular telephone services to the
offender, legal action or both.
• Do not attempt to open the phone. Non-expert
handling of the phone may damage it.
• Do not drop or knock the phone. Rough handling
may damage the internal circuits.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with
a soft cloth slightly dampened in mild, soapy water.
• If the phone or any of its accessories are not
working properly, take them to your nearest
qualified service centre. The personnel there will
assist you, and if necessary, arrange for the phone
to be repaired.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfil the warranty
obligations and enjoy this product for many years.
• Keep the phone and all its parts and accessories
out of the reach of small children.
Emergency Calls
Important!This phone, like any cellular phone, uses
radio signals, cellular and landline
• Keep the phone dry. Precipitation, humidity and
liquids containing minerals will corrode the
electronic circuits.
networks, as well as user-programmed
functions that cannot guarantee
connection in all conditions. Therefore,
you should never rely solely on any
cellular phone for essential communi-
cations (medical emergencies for example).
• Do not use or store the phone in dusty, dirty areas
as its components may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries and warp or melt
certain plastics.
Remember, to make or receive any calls, the phone
must be switched on and in a service area with
adequate cellular signal strength.
• Do not store the phone in cold areas. When the
phone warms up to its normal temperature,
moisture can form inside the phone, which may
damage the electronic circuits.
Emergency calls may not be possible on all cellular
phone networks or when certain network services
and/or phone features are in use. Check with local
cellular service providers.
122
123
Glo s s a ry
Glossary
To help you understand the main technical terms and
abbreviations used in this booklet and take full
advantage of the features on your mobile phone, here
are a few definitions.
GSM (Global System for Mobile Communication)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
ALS (Alternate Line Service)
Capability of associating two alternate lines with one
SIM card. You can make and receive calls on either
line as required.
Line Identification Services
Service allowing subscribers to view or block the
telephone numbers of callers.
Call Barring
Multiparty Calling
Ability to restrict outgoing and incoming calls.
Ability to establish a conference call involving up to
five additional parties.
Call Diverting
Ability to reroute calls to another number.
Phone Password
Security code used to unlock the phone when you
have selected the option to lock it automatically each
time it switches on.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
PIN (Personal Identification Number)
Security code that protects the phone/SIM card
against unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
Call Waiting
Ability to inform users that they have an incoming call
when engaged on another call.
124
125
Glo s s a ry
Glo s s a ry
PUK (PIN Unblocking Key)
Soft Keys
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Keys marked
of which:
• Varies according to the function that you are
currently using
and
on the phone, the purpose
• Is indicated on the bottom line of the display just
above the corresponding key
Roaming
Use of your phone when you are outside your home
area (when travelling for example).
Voice Mail
Computerised answering service that automatically
answers your calls when you are not available, plays
a greeting (optionally in your own voice) and records
a message.
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and memory
information, as well as the subscriber’s personal
data). The SIM card fits into a small slot on the back
of the phone and is protected by the battery.
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to speak
to the correspondent. The message created or
received (up to 160 characters long) can be
displayed, received, edited or sent.
126
127
In d e x
Index
A
C (continued)
D (continued)
K
Calls (continued)
Dialled Calls (1-3) • 60
Dialling • 22
Key tones
ABC text mode • 38
Access codes • 115
Accessories • 9
redialling • 23
muting • 34
automatically • 79
Display • 12
selecting • 74
sending • 34
volume • 24
rejecting • 25
contrast • 94
Active Line (4-1- ) • 81
*
searching for a number in
the phonebook • 46
time (1-4) • 60
icons • 13
Alarm (5-2) • 98
language • 77
Keypad
Alert Type (3-4) • 50; 73
ALS • 110
Diverting calls (4-2-1) • 82
locking • 21
tone (3-5) • 74
Keys • 10; 11
via the phonebook • 41
waiting (4-2-3) • 86
Card
Answering
a call • 25
E
a second call• 31
Any-key Answer (4-1-4) • 78
Auto Answer (4-1-8) • 79
Auto Redial (4-1-7) • 79
Earpiece volume • 24
Editing
L
installing SIM• 15
Care • 122
Changing
call barring
Language (4-1-3) • 77
Last number redialling • 23
automatic • 79
LCD
messages• 65
missed calls• 27
phonebook numbers• 44
schedules• 98
B
password • 86
contrast • 94
layout • 12
password (4-3-4) • 92
PIN (4-3-2) • 91
Backlight • 14; 78
Barring
Emergency calls • 8; 123
Erasing
PIN2 (4-3-7) • 93
text modes• 36
settings (4-4) • 93
LED indicator • 14
Length of calls • 60
Letters
calls (4-2-2) • 84
password • 86; 117
Batteries
missed calls • 27
phonebook numbers• 44
schedules• 98
Characters
changing modes • 36
entering • 35
charging • 18
Error Tone (3-7) • 75
changing modes• 36
entering • 35
installing • 15
low battery indicator • 19
precautions • 118
Broadcast (2-6) • 67
Browser
Charging batteries • 18
Clock (5-5) • 103
type• 94
F
Line
Fixed Dial Number (FDN)
mode (4-3-6) • 92
Functions
active • 81
Closed User Group
(4-2-6) • 89
Colour
service light• 14; 45; 95
Composer
Melody (3-2) • 71
Conference calls • 32
Connect
to Voice Mail (2-1-1) • 62
Tone (3-9) • 75
Contrast (4-4-3) • 94
Copying phonebook
numbers • 94
identification (4-2-5) • 88
Locking
settings (4-5) • 94
using (7) • 105
selecting • 48
keypad • 21
phone (4-3-3) • 91
SIM card (4-3-5) • 92
Low battery indicator • 19
G
C
Games (6) • 104
Greeting Message
(4-1-1) • 76
Groups
Calculator (5-3) • 100
Caller ID (4-1-9) • 80
Calls
M
Maintenance • 122
Melody Composer (3-2) • 71
Memory status• 44
Menus • 52-58
answering • 25
a second call • 31
barring (4-2-2) • 84
cost (1-5) • 61
dialled (1-3) • 60
diverting (4-2-1) • 82
emergency • 8; 123
ending • 23
holding • 30; 86
international • 22
making • 22
missed (1-1) • 26; 59
multiparty • 32
received (1-2) • 59
records (1) • 59
user• 89
H
Messages
Holding calls • 30; 86
Correcting numbers • 22
Cost of calls• 61
CUG (4-2-6) • 89
broadcast (2-6) • 67
greeting (4-1-1) • 76
picture (2-7) • 68
preset (2-4) • 66
reading (2-2) • 63
ringing tone • 70
set up (2-5) • 66
tone (3-6) • 74
voice mail (2-1) • 62
writing (2-3) • 65
I
Icons • 13
Identifying
callers • 80
lines • 88
Image
D
Date
format (5-5-3) • 103
setting (5-5-2) • 103
Deleting
screen • 93
missed calls • 27
phonebook numbers • 44
schedules • 98
128
129
In d e x
In d e x
M (continued)
P (continued)
S (continued)
T
Microphone mute • 28
Minute Minder (3-8) • 75
Missed Calls (1-1) • 26; 59
Multiparty calls • 32
Mute
Phonebook • 41
alert tone • 44
Scheduler (5-1) • 96
Screen image • 93
SDN • 47
Text
changing modes • 36
entering • 35
colours • 45
copying numbers • 44
dialling • 46
Searching for names/
numbers • 46
Security Settings (4-3) • 90
Selecting functions/
options • 48
Time
call (1-4) • 60
format • 103
setting (5-5-1) • 103
world (5-4) • 102
key tones • 34
microphone • 28
editing numbers • 44
erasing numbers • 44
making calls • 23; 46
memory status • 44
options • 43
pasting numbers • 43
searching/dialling • 46
storing numbers/
names • 41
N
Names
entering • 35
searching/dialling • 46
storing in the
phonebook • 41
Network Selection
(4-2-4) • 87
Network Services (4-2) • 81
Numbers
Sending
Tone
key tones • 34
messages • 65
Service
connect (3-9) • 75
error (3-7) • 75
keypad (3-5) • 74
melody • 71
message (3-6) • 74
ring (3-1) • 70
colours • 45; 95
dialling numbers
(SDN) • 47
Picture Messages (2-7) • 68
PIN • 116
light (4-1-6) • 14; 79
Settings
Travel adapter • 18
T9 mode • 36
changing (4-3-2) • 91
checking (4-3-1) • 91
PIN2 • 116
alarm • 98
copying phonebook • 44
correcting• 22
editing
missed call• 27
phonebook• 44
entering• 40
U
browser • 94
User groups • 89
changing (4-3-7) • 93
Preset Message
date• 103
language• 77
LCD • 93
V
List (2-4) • 66
Vibration • 73
Voice mail • 62
Voice Server Number
(2-1-2) • 63
Problem solving • 112
PUK • 117
network • 81
phone • 76
erasing phonebook• 44
fixed dial• 92
mode • 40
PUK2 • 117
reset • 81
security • 90
R
Volume adjustment
earpiece • 24
service colour • 95
time • 103
pasting• 43
Read Messages (2-2) • 63
Received Calls (1-2) • 59
Records
redialling• 23
automatically• 79
searching/dialling• 46
storing• 41
keypad • 24
ring (3-3) • 73
Set Up (2-5) • 66
Silent mode • 11; 70
SIM card
call (1) • 59
Redialling
automatically • 79
last number • 23
Rejecting calls • 25
Reset Settings (4-1-0) • 80
Ring
tone (3-1) • 45; 70
type • 73
volume (3-3) • 73
Ringing tone messages • 70
Roaming • 87
W
Waiting
installing • 15
locking (4-3-5) • 92
precautions • 15
SMS
O
Options
selecting • 48
Organiser (5) • 96
Own Number (4-1-2) • 77
calls • 31; 86
WAP Browser • 94; 105
World Time (5-4) • 102
Write Messages (2-3) • 65
WWW Services (7) • 105
see Messages
Soft keys • 48
Solving problems • 112
Speed dialling • 45
Switching on/off
microphone• 28
phone• 20
P
Password
barring • 117
changing • 86
phone • 115
Symbolic mode• 40
S
Safety
changing (4-3-4) • 92
Pasting numbers • 43
Phone
batteries • 118
information • 120
precautions • 7
Lock (4-3-3) • 91
password • 92; 115
settings (4-1) • 76
130
131
132
133
134
|