Samsung SGH E880 User Manual

* Depending on the software installed or your service provider, some

of the description in this manual may differ from your phone.

* Depending on your country, your phone and accessories may

appear different from the illustrations in this manual.

Printed in Korea

Code No.:GH68-07069A

English. 07/2005. Rev 1.0

World Wide Web

http://www.samsungmobile.com

Use road safety at all times

Do not use a hand-held phone while driving. Park

the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point (service

station) or near fuels or chemicals.

Important

safety

Switch off in an aircraft

Wireless phones can cause interference. Using them

in an aircraft is both illegal and dangerous.

precautions

Switch off the phone near all medical

equipment

Failure to comply with the following

precautions may be dangerous or illegal.

Hospitals or health care facilities may be using

equipment that could be sensitive to external radio

frequency energy. Follow any regulations or rules in

force.

Interference

Keep your phone away from small children

All wireless phones may be subject to interference,

which could affect their performance.

Keep the phone and all its parts, including accessories,

out of the reach of small children.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any area and

always switch off your phone whenever it is forbidden

to use it, or when it may cause interference or danger.

Use only Samsung-approved accessories and

batteries. Use of any unauthorised accessories could

damage your phone and may be dangerous.

Water resistance

• The phone could explode if the battery is

replaced with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

Your phone is not water-resistant. Keep it dry.

Sensible use

Use only in the normal position (held to the ear). Avoid

unnecessary contact with the antenna when the phone

is switched on.

Qualified service

Only qualified service personnel may repair your

phone.

Emergency calls

For more detailed safety information, see "Health and

safety information" on page 88.

Key in the emergency number for your present

location, then press

•

Camera and camcorder

Use the camera module on your

phone to take a photo or record a

video.

About this Guide

This User’s Guide provides you with condensed

information about how to use your phone. To quickly

learn the basics for your phone, please refer to “Get

started” and “Step outside the phone.”

In this guide, the following instruction icons appear:

Special

features of your phone

Indicates that you need to pay careful

attention to the subsequent information

regarding safety or phone features.

•

MP3 player

Play MP3 music files using your

phone as an MP3 player.

Indicates that you can get more information

on the referenced page.

ꢀ

→

Indicates that you need to press the

Navigation keys to scroll to the specified

option and then select it.

•

Bluetooth

Send photos, images, videos, and

other personal data, and connect

to other devices using free,

wireless Bluetooth technology.

[

]

Indicates a key on the phone. For example,

[

]

< >

Indicates a soft key, whose function is

displayed on the phone screen. For example,

<Menu>

•

Get personal with photo caller

See who’s calling you when their

very own photo displays.

•

E-mail

Send and receive e-mails with images, video, and

audio attachments.

•

Java

Name card

Enjoy Java™-based embedded

games and download new games.

Create name cards with your

number and profile. Whenever

introducing yourself to others, use

this convenient electronic name

card.

•

Calendar

Keep track of your daily, weekly,

and monthly schedule.

•

WAP browser

Access the wireless web and access

various services and current

information.

•

Voice recorder

Record memos or sounds.

•

Multimedia Message Service (MMS)

Send and receive MMS messages with a

combination of text, images, video, and audio.

Browse the web ................................................... 17

Use Phonebook .................................................... 17

Send messages.................................................... 18

View messages .................................................... 20

Use Bluetooth...................................................... 21

Contents

Unpack

Make sure you have each item

Your phone

Enter text

AB, T9, Numeric, and Symbol mode

Call functions

Buttons, features, and locations

Get started

Advanced calling features

Menu functions

First steps to operate your phone

Install and charge the phone ................................... 7

Power on or off...................................................... 8

Keys and display.................................................... 9

Access menu functions.......................................... 11

Customise your phone .......................................... 12

Make/Answer calls................................................ 14

All menu options listed

Solve problems

Help and personal needs

Health and safety information

Step outside the phone

Index

Begin with your camera, music, and other special features

Use camera......................................................... 14

Play MP3s ........................................................... 15

Overview of menu functions

To access Menu mode, press <Menu> in Idle mode.

1 Call records

ꢀ

p.29

3 Applications

ꢀ

p.36

5 Messages

ꢀ

p.45

8 Camera

9 Settings

ꢀ

p.66

p.73

1 Current contacts

2 Missed calls

3 Dialled calls

4 Received calls

5 Delete all

ꢀp.29

ꢀp.30

ꢀp.31

1 Java world

2 MP3 player

3 Voice recorder

4 World time

5 Alarm

6 PIM sync

7 Calculator

8 Converter

9 Timer

ꢀp.36

ꢀp.37

ꢀp.39

ꢀp.40

ꢀp.41

ꢀp.42

ꢀp.43

1 Create message

2 My messages

3 Templates

4 Delete all

5 Settings

ꢀ

p.45

p.48

p.54

p.55

p.59

ꢀ

1 Time & Date

ꢀp.73

ꢀp.74

ꢀp.75

ꢀp.76

ꢀp.77

ꢀp.80

ꢀp.83

ꢀp.84

ꢀp.85

2 Phone settings

3 Display settings

4 Sound settings

5 Network services

6 Bluetooth

7 Security

8 Connection settings

9 Reset settings

6 Call time

6 Memory status

7 Call cost^*

6 File manager

ꢀ

p.59

2 Phonebook

ꢀp.31

1 Images

2 Videos

3 Music

4 Sounds

5 Other files

6 Memory status

ꢀ

p.59

p.60

p.61

p.62

1 Contacts list

2 Add new contact

3 Group

ꢀp.31

ꢀp.32

ꢀp.33

ꢀp.34

ꢀp.35

0 Stopwatch

4 Browser

ꢀp.43

4 Speed dial

1 Home

2 Bookmarks

3 http://

4 WAP profile

5 Clear cache

ꢀp.43

ꢀp.44

ꢀp.45

5 My name card

6 Own number

7 Management

8 Service number^*

* Shows only if supported by your

SIM card.

7 Calendar

ꢀ

p.62

Unpack

Your phone

Make sure you have each item

Buttons, features, and locations

Flash

Earpiece

Display

Camera

Phone

Travel Charger

User’s Manual

Camera lens

swap switch

Navigation keys

(Up/Down/Left/

Right)

WAP access/

Confirm key

Soft key (right)

Headset jack

Camera key

Battery

Volume keys

Soft key (left)

Power on/off/

Menu exit key

Dial key

You can obtain various accessories from

your local Samsung dealer.

Correct key

Alphanumeric

keys

The items supplied with your phone

and the accessories at your Samsung

dealer may vary, depending on your

country or service provider.

Special

function keys

Microphone

Get started

First steps to operate your phone

Install the battery.

Plug the travel charger

into the phone.

SIM card information

When you subscribe to a cellular network, you receive

a plug-in SIM (Subscriber Identity Module) card

loaded with your subscription details, such as your

PIN, and available optional services.

Install and charge the phone

Plug the charger into a standard AC wall outlet.

Remove the battery.

Insert the SIM card.

The LED on the charger indicates the charging

progress:

•

Red: the battery is being charged.

Green: the battery is completely charged.

Orange: the battery is not correctly plugged in

or is operating at a too high or too low

temperature.

If the phone is already

on, first turn it off by

Make sure that the gold-

coloured contacts on the

card face down into the

phone.

holding

[

Get started

Power on or off

When the phone is completely charged (green

charger LED), unplug the charger from the power

outlet.

Switch on

1. Open the phone.

Remove the charger from the phone.

2. Press and hold [

the phone.

] to turn on

3. If necessary, enter the PIN and

Do not turn on

the phone when

mobile phone

press <OK>.

use is prohibited.

1. Open the phone.

Switch off

2. Press and hold [

Low battery indicator

Keypad lock

When the battery is low:

When you close the phone, the keypad lock feature

locks the exposed keys so that nothing will happen if

the keys are accidentally pressed.

•

a warning tone sounds,

the battery low message displays, and

the empty battery icon

blinks.

To unlock the keypad, press <Unlock> and press

<OK>.

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

Keys and display

End a call.

Hold down to switch the phone on and off.

In Menu mode, cancel input and return the

phone to Idle mode.

Key(s)

Description

Perform the function indicated on the

bottom line of the display.

Enter numbers, letters, and some special

characters.

In Idle mode, hold [1] down to access your

In Idle mode,

•

[Up/Down]: access your favourite

menus directly. p. 74

voice mail server. Hold [

0] down to enter an

ꢀ

international call prefix.

•

[Left]: Text message

[Right]: MP3 player

Enter special characters.

Hold [

]

down to activate or deactivate

In Menu mode, scroll through the menu

options.

Quiet mode.

Adjust the phone volume.

In Idle mode, launch the Wireless

Application Protocol (WAP) browser.

In Menu mode, select the highlighted menu

option.

In Idle mode, with the phone open, adjust

the keypad tone volume. With the phone

closed, hold down to turn on the backlight.

(on the left)

In Idle mode, hold down to turn on the

camera.

Delete characters from the display.

Send or answer a call.

In Idle mode, retrieve the recent numbers

dialled, missed, or received.

In Camera mode, take a photo or record a

video.

(on the right)

Get started

Display

Layout

Icons

(continued)

New voice mail

Call diverting feature is active

Bluetooth feature is active

Icons

display various icons.

Connected to hands-free or

Bluetooth headset

Text and graphics

display messages,

instructions, and

Synchronised with a PC

GPRS network

information you enter.

Soft key function

indicators

show the current functions

assigned to the two soft

keys.

Contacts

Roaming network

Home Zone, if you have registered

for the appropriate service

Icons^*

Call ringer set to vibrate

Received signal strenth

Call in progress

Mute mode is active during a call

Quiet mode is active (Mute)

Quiet mode is active (Vibration)

Battery power level

Out of your service area; you cannot

send or receive calls

Alarm set

New message

New e-mail message

* The icons shown on the display may vary, depending

on your country or service provider.

Access menu functions

Select an

option

1. Press the appropriate soft key.

Use the soft

keys

The roles of the soft keys vary

depending on the function you are

using. The bottom line of the

2. Press the Navigation keys to

move to the next or previous

option.

display indicates their current role.

3. Press <Select> or [ ] to

confirm the function displayed

or option highlighted.

Contacts

4. To exit, choose either of the

following methods.

•

Press <Back> to move up

one level.

Press the right soft

key to access

Contacts list in the

Phonebook menu.

Press the left soft

key to access

Menu mode.

•

Press [

mode.

] to return to Idle

Use shortcuts Press the number key

corresponding to the option you

want.

Get started

Customise your phone

You can set a wallpaper for the

display.

Idle mode

wallpaper

1. In Idle mode, press <Menu

Display

1. In Idle mode, press <Menu

and select Settings

settings Language

2. Select a language.

→

Phone

language

and select Settings

settings Wallpaper

display

→

Display

→

Main

2. Select an image or video

category.

1. In Idle mode, press <Menu

Call ringer

melody

and select Settings

settings

Ringtone

→

Sound

→

Incoming call

→

3. Select an image and press

Select>, or select a video clip

and press <Add>.

2. Select a ringer category.

3. Select a ringer melody.

4. Press <Save>.

You can change the colour for the

display components, such as title

bars and highlight bars.

Menu mode

skin colour

1. In Idle mode, press <Menu

and select Settings Display

settings Skin

2. Select a colour pattern.

→

You can switch to Quiet mode to

avoid disturbing other people with

your phone sound.

You can protect the phone against

unauthorised use with a phone

password.

Quiet mode

Phone lock

Press and hold

[

]

in Idle mode.

1. In Idle mode, press <Menu

and select Settings

Security Change

password

2. Enter the default password,

→

You can use the Navigation keys as

shortcut keys to access specific

menus directly from Idle mode.

shortcuts

“00000000” and press <OK>.

To assign a shortcut menu:

3. Enter a new 4- to 8- digit

1. In Idle mode, press <Menu

and select Settings Phone

settings Short cut

2. Select a key.

password and press <OK>.

→

4. Enter the new password again

and press <OK>.

5. Select Phone lock

6. Select Enable

7. Enter the password and press

OK>.

3. Select a menu to be assigned to

the key.

Make/Answer calls

Step outside the phone

Begin with your camera, music, and other special features

Use camera

1. In Idle mode, enter an area code

and phone number.

2. Press

3. To end the call, press

Make a call

[

1. Open the phone.

Take a photo

2. In Idle mode, press and hold

1. When the phone is ringing, press

Answer a call

[

]

to turn on the camera.

[

3. Aim the lens at the subject and

adjust the image.

2. To end the call, press

[

4. Press

[

] to take a photo. The

Press [ ].

Adjust the

volume during

a call

photo is saved automatically.

5. Press <Preview> to return to

Capture mode.

1. In Capture mode, press the left

1. In Record mode, press the left

View a photo

Play a video

soft key and select Go to

photos

videos.

2. Press [Left] or [Right] to select

a photo category.

2. Press [Left] or [Right] to select

a video category.

3. Select a photo you want.

3. Select a video you want.

Play MP3s

1. In Idle mode, press and hold

Record a video

[

] to turn on the camera.

Use these methods:

Copy MP3 files

to the phone

2. Press [

] to switch to Record

mode.

•

Download from the wireless

web p. 43

ꢀ

3. Press

4. Press

[

] to start recording.

Download from a computer

using Samsung PC Studio

[

] to stop recording. The

video is saved automatically.

ꢀ

Samsung PC Studio User’s

Guide

5. Press <Preview> to return to

Record mode.

•

Receive via Bluetooth

ꢀp. 83

Step outside the phone

1. In Idle mode, press <Menu

and select Applications

MP3 player

2. Press <Options> and select

Add to playlist Add all or

Add files

1. From the MP3 player screen,

press [ ].

Create a play

list

Play MP3 file

→

2. During playback, use the

following keys:

→

•

[

]: pauses/resumes

playback.

[Left]: goes back to the

previous file.

[Right]: skips to the next

file.

3. For Add files, select specific

files and press <Select>.

Repeat from step 2.

•

[Up]: opens the play list.

[Down]: stops playback.

[

]: adjusts the volume.

Browse the web

Use Phonebook

Using a built-in WAP (Wireless Application Protocol)

browser, you can get easy access to the wireless web

to get a variety of up-to-date services and information

and to enjoy downloads of web content.

To the phone’s memory:

Add an entry

1. In Idle mode, enter a phone

number and press <Options>.

2. Select Save contact

a number type.

→

Phone

In Idle mode, press [ ].

Launch the

browser

→

3. Specify the contact information:

First name, Last name, Mobile,

Home, Office, Fax, Other, Email,

Caller ID, Ringtone, Group, and

Memo.

•

To scroll through browser items,

press [Up] or [Down].

Navigate with

the WAP

browser

To select an item, press

<Options> and select Select.

4. Press <Save> to save the

To return to the previous page,

press <Options> and select

entry.

To the SIM card:

Back

1. In Idle mode, enter a phone

•

To access browser options,

press <Menu>.

number and press <Options>.

2. Select Save contact

→

SIM.

3. Enter a name.

4. Press <Save> to save the

entry.

Step outside the phone

Send messages

1. In Idle mode, press

Contacts>.

Find an entry

1. In Idle mode, press <Menu

Send a text

2. Select an entry.

and select Messages

message

2. Enter the message text.

3. Press <Options> and select

→

Create

Text message.

message (SMS)

→

3. Select a number and press

[

]

to dial, or press <Options> to

access options.

Save and send or Send only

4. Enter destination numbers.

5. Press [ ] to send the message.

1. In Idle mode, press <Menu

and select Phonebook My

name card

Create and

send a name

card

→

2. Specify your contact

information.

1. In Idle mode, press <Menu

and select Messages Create

Multimedia

Send a

→

multimedia

message

(MMS)

3. Press [ ] to save the name

card.

message

→

4. To send the name card to other

2. Select Subject

people, press <Options> and

3. Enter the message subject and

press [ ].

select Send

→

SMS/MMS/

Email Bluetooth

4. Select Picture&Video or

1. In Idle mode, press <Menu

and select Messages Create

message Email

2. Select Subject

Send a

Send an e-mail

Sound and add a media file.

→

multimedia

message

(MMS)

→

For Picture&Video, select Add

image or Add video to add a

photo or video clip.

(continued)

3. Enter the e-mail subject and

press [ ].

For Sound, select Add sound

to add a sound clip.

4. Select Message

5. Enter the e-mail text and press

6. Select File attach

5. Select Message

6. Enter the message text and

press [ ].

[

7. Press <Options> and select

7. Add image, video, music, or

sound files.

Send

8. Enter destination numbers.

8. Press <Options> and select

9. Press [ ] to send the message.

Send.

9. Enter e-mail addresses.

10.Press [ ] to send the e-mail.

Step outside the phone

View messages

From the Inbox:

View a

multimedia

message

(continued)

1. In Idle mode, press <Menu

When a notification appears:

View a text

message

and select Messages

messages Inbox

2. Select a message.

→

1. Press <View>.

→

2. Select a message from the

Inbox.

From the Inbox:

1. In Idle mode, press <Menu

and select Messages My

messages Email box

2. Select an account.

View an e-mail

1. In Idle mode, press <Menu

→

and select Messages

messages Inbox

2. Select a message.

→

3. Press <Yes> when Check new

Email is displayed to retrieve

an e-mail or a header.

When a notification appears:

View a

multimedia

message

1. Press <View>.

4. Select an e-mail or a header.

5. If you selected a header, press

2. Press <Options> and select

Retrieve

Options> and select

3. Select a message from the

Inbox.

Retrieve

Use Bluetooth

1. Access an application.

2. Scroll to an item.

Send data

Your phone is equipped with Bluetooth technology

which enables you to connect the phone wirelessly to

other Bluetooth devices and exchange data with them,

talk hands-free, or control the phone remotely.

3. Press <Options> and select

Send via

→

Bluetooth.

4. Select a device.

In Idle mode, press <Menu> and

select Settings Bluetooth

Activation On

Turn on

Bluetooth

5. If necessary, enter the

→

Bluetooth PIN and press <OK>.

→

To receive data via Bluetooth, your

phone’s Bluetooth feature must be

active.

Receive data

1. In Idle mode, press <Menu

and select Settings

Bluetooth My devices

Search for and

pair with a

Bluetooth

device

→

If necessary, press <Yes> to

confirm the reception.

Search new device

2. Select a device.

3. Enter a Bluetooth PIN code or

the other device’s Bluetooth PIN

code, if it has one, and press

<OK>.

When the owner of the other

device enters the same code,

pairing is complete.

Using AB mode

Press the appropriate key until the character you want

appears on the screen.

Enter text

AB, T9, Numeric, and Symbol mode

You can enter text for some features such as

messaging, Phonebook, or Calendar, using AB mode,

T9 mode, Numeric mode, and Symbol mode.

Changing the text input mode

The text input mode indicator appears when the cursor

is in a text field.

•

Press and hold [ ] to switch between T9 and AB

modes. Depending on your country, you may also

be able to access an input mode for your specific

language.

•

Press [ ] to change case or switch to Numeric

mode.

Press and hold [ ] to switch to Symbol mode.

Tips for using AB mode

•

To enter the same letter twice or to enter a

different letter on the same key, wait for the cursor

to move to the right automatically or press [Right].

Then, enter the next letter.

•

Press [ ] to insert a space.

4. Press [ ] to insert a space and enter the next

word.

Press the Navigation keys to move the cursor.

Press [

and hold [

] to delete characters one by one. Press

Tips for using T9 mode

C] to clear the display.

•

Press [1] to enter periods or apostrophes

automatically.

Using T9 mode

T9 is a predictive text input mode that allows you to

key in any character using single keystrokes.

•

Press [ ] to insert a space.

Press the Navigation keys to move the cursor.

Press [

C] to delete characters one by one. Press

and hold [

C] to clear the display.

Entering a word in T9 mode

1. Press [

each key once for each letter.

For example, press [ ], [ ], [

enter HELLO in T9 mode.

2] to [9] to start entering a word. Press

Adding a new word to the T9 dictionary

This feature may not be available for some languages.

1. Enter the word that you want to add.

5], [5], and [6] to

2. Press [0] to display alternative words for your key

T9 predicts the word that you are typing, and it

may change with each key that you press.

presses. When there are no more alternative

words, Add appears on the bottom line.

2. Enter the whole word before editing or deleting

characters.

3. Press <Add>.

4. Enter the word you want using AB mode and press

3. When the word displays correctly, go to step 4.

<OK>.

Otherwise, press [

choices for the keys that you have pressed.

For example, OF and ME use [ ] and [ ].

0] to display alternative word

Using Numeric mode

Numeric mode enables you to enter numbers.

Call functions

Advanced calling features

Press the keys corresponding to the digits you want.

Making a call

1. In Idle mode, enter the area code and phone

number.

Using Symbol mode

Symbol mode enables you to insert symbols.

2. Press [ ].

Press

[

]

to clear the last digit or press and hold

display more symbols

select a symbol

[Up] or [Down].

[C]

to clear the whole display. You can move the

the corresponding

number key.

cursor to edit an incorrect digit.

Making an international call

1. In Idle mode, press and hold [

appears.

clear the entered symbol(s)

insert the symbol(s)

[C].

0]. The

character

<OK>.

2. Enter the country code, area code, and phone

number, then press [ ].

Redialling recent numbers

1. In Idle mode, press [ ] to display the list of

recent numbers.

2. Scroll to the number you want and press [ ].

Making a call from Phonebook

Answering a call

When you receive an incoming call, the phone rings

and displays the incoming call image.

Once you have stored a number in Phonebook, you

can dial the number by selecting it from

Phonebook.ꢀp. 31

Press <Accept> or [ ] to answer the call.

You can also use the speed dial feature to assign your

most frequently called numbers to specific number

Tips for answering a call

•

When Anykey answer in the Extra settings

menu is active, you can press any key, except for

keys.

ꢀp. 34

Dialling a number from the SIM card

1. In Idle mode, enter the location number for the

phone number you want and press [ ].

Reject> or [

Press <Reject> or [

Press and hold [

ꢀ

p. 75

•

] to reject a call.

] to mute a call ringer.

2. Press [Left] or [Right] to scroll through other

numbers.

Viewing missed calls

If you have missed calls, the screen displays how

many calls you have missed.

3. Press <Dial> or [ ] to dial the number you want.

Ending a call

1. Press <View>.

Close the phone or press [

2. If necessary, scroll through the missed calls.

3. Press [ ] to dial the number you want.

Call functions

Placing a call on hold/Retrieving

Press <Hold> or <Retrieve> to place a call on hold

or retrieve the call.

Using the headset

Use the headset to make or answer calls without

holding the phone.

Connect the headset to the jack on the right side of

the phone.

Making a second call

You can make another call if your network supports it.

1. Press <Hold> to put the call on hold.

2. Make the second call in the normal way.

3. Press <Swap> to switch between the calls.

The buttons on the headset work as listed below:

Press

redial the last call

answer a call

end a call

and hold the button twice.

the button.

4. Press <Options> and select End held call to end

the call on hold.

the button.

5. To end the current call, press [

Answering a second call

You can answer an incoming call while already on the

phone, if your network supports it and you have

Options during a call

You can access a number of functions during a call.

activated the call waiting feature.

ꢀp. 78

Adjusting the volume during a call

1. Press [ ] to answer the call. The first call is

automatically put on hold.

Use [

] to adjust the earpiece volume during a call.

Press [ ] to increase the volume level and [ ] to

decrease the volume level.

2. Press <Swap> to switch between the calls.

3. Press <Options> and select End held call to end

Using the menu options

You can access Menu mode and use menu functions.

the call on hold.

4. To end the current call, press [

During a call, some menu functions are not

available.

Transferring a call

Press <Options> and select Menu

You can transfer the currently active call to a caller on

hold, if your network supports it. With this option, the

two callers can talk to each other, but you are

disconnected from the call.

Switching off the microphone (Mute mode)

You can temporarily switch off your phone’s

microphone so that the person on the phone cannot

hear you.

Press <Options> and select Transfer

Using an external speaker

Press <Options> and select Mute or Unmute

Use an optional external speaker to talk and listen

with the phone a short distance away. First, you must

plug a speaker into the phone.

Muting or sending key tones

You can turn the key tones off or on.

Press <Options> and select Mute keys or Send

keys

Using a Bluetooth headset

Use an optional Bluetooth headset to talk on the

phone without holding the phone to your ear. To use

this feature, you first need to register your headset

To communicate with answering machines or

computerised telephone systems, Send keys must

be selected.

and connect it to the phone.

Press <Options> and select Switch to headset or

Switch to phone

ꢀp. 80

Call functions

Sending a sequence of DTMF tones

Using SIM services

Dual tone multi-frequency (DTMF) tones are the tones

used in phones for tone dialling.

The SIM service menu is available if you use a SIM

card in your phone. A SIM card provides services such

as news, weather, sports, entertainment, and location

services.

You can send DTMF tones as a group after entering the

entire number you need to send or retrieving a

number from Phonebook. This feature is helpful for

entering a password or an account number when you

call an automated system, like a banking service.

For details, see your SIM card instructions or contact

your service provider.

Making a multi-party call

1. When connected with a teleservice system, press

Use this feature to allow as many as six people to join

a multi-party call, or conference call.

Options> and select Send DTMF

2. Enter the number you need to send and press

OK>.

Your service provider must support multi-party calls

for you to use this feature.

Using Phonebook

You can access the Phonebook menu to locate or

store entries.

Setting up a multi-party call

1. Call the first participant.

ꢀp. 31

2. Call the second participant. The first call is

automatically put on hold.

Press <Options> and select Phonebook

3. Press <Options> and select Join. The first

participant is added to the multi-party call.

4. If desired, call another person or answer an

incoming call.

Menu functions

5. Press <Options> and select Join

All menu options listed

6. Repeat steps 4 and 5 as desired.

Call records (Menu 1)

Use this menu to view the calls you have dialled,

received, or missed, the length of your calls, and the

cost of your calls.

Having a private conversation with one

participant

1. Press <Options> and select Private

2. Select a name or number from the participant list.

To access this menu, press <Menu> in Idle mode and

You can talk privately with that person, while the

other participants converse with each other.

select Call records

3. To return to the multi-party call, press <Options

Current contacts (Menu 1.1)

and select Join

This menu displays the most recent calls dialled,

received, or missed.

Dropping one participant

1. Press <Options> and select Remove

Accessing a call record

1. Press [Left] or [Right] to select a call type.

2. Press [Up] or [Down] to scroll through the call list.

2. Select a name or number from the participant list.

The participant is dropped from the call, but the

call continues with the other parties.

3. Press [ ] to view the details of a call, or [ ] to

dial a number.

3. Close the phone or press [

party call.

] to end the multi-

Menu functions

Using call record options

Received calls (Menu 1.4)

While viewing the call list, press <Options> to access

the following options:

This menu displays the most recent calls you have

received.

•

Detail: show the details of the selected call.

Delete all (Menu 1.5)

Paste: edit the phone number.

Use this menu to delete all of the records in each call

type.

Save contact: save the phone number to

Phonebook.

1. Press [ ] to check the call type(s) to be cleared.

2. Press <Delete>.

•

Send message: send an SMS or MMS message.

Delete: delete the selected call record or all

records.

3. Press <Yes> to confirm the deletion.

Missed calls (Menu 1.2)

Call time (Menu 1.6)

This menu displays the most recent calls that you did

not answer.

This menu displays the time log for calls made and

received. The actual time invoiced by your service

provider will vary.

Dialled calls (Menu 1.3)

•

Last call time: check the length of your last call.

This menu displays the most recent calls you have

dialled.

Total sent: check the total length of all the calls

you have dialled.

•

Total received: check the total length of all the

calls you have received.

To reset the call timers, press <Reset>. You need to

enter the phone password.

•

Price/Unit: set the price per unit that is applied

when the cost of your calls is calculated. You need

to enter your PIN2.

The password is preset to 00000000. You can

change this password.

ꢀp. 83

Phonebook (Menu 2)

Call cost (Menu 1.7)

You can store phone numbers on your SIM card and in

your phone’s memory. The SIM card and phone’s

memory are physically separate, but they are used as

a single entity called Phonebook.

This network feature displays the cost of calls. This

menu is available only if your SIM card supports this

feature. Note that this is not intended to be used for

billing purposes.

To access this menu, press <Menu> in Idle mode and

•

Last call cost: check the cost of your last call.

select Phonebook

Total cost: check the total cost of all of your calls.

If the total cost exceeds the maximum cost set in

Set max cost, you must reset the counter before

you can make another call.

Contacts list (Menu 2.1)

Use this menu to search for numbers in Phonebook.

Press <Contacts> in Idle mode to quickly access

this menu.

•

Max cost: check the maximum cost limit set in

Set max cost

Reset counters: reset the cost counters. You

need to enter your PIN2.

Finding an entry

1. Enter the first few letters of the name that you

want to find.

Set max cost: set the maximum cost authorised

for your calls. You need to enter your PIN2.

2. Select the name you want from the list.

Menu functions

3. Press [ ] to dial the number, or <Options> to

Add new contact (Menu 2.2)

access Phonebook options.

Use this menu to add a new contact to Phonebook.

Using Phonebook options

Storing a number in the phone’s memory

While viewing the contact list or contact details, press

1. Select Phone

Options> to access the following options:

View: display details about the contact.

Edit: edit the contact information.

2. Change the settings or enter information about the

contact.

•

First name

Mobile Home

number in any category.

Last name: assign a name.

•

Send message: send an SMS, MMS, or e-mail

message.

Office Fax Other: add a

•

Add new contact: add a new contact to

Phonebook.

•

Email: assign an e-mail address.

Caller ID: assign an image as a caller ID

image to alert you to a call from the number.

Ringtone: assign a ringer melody to alert you

to a call from the number.

Copy to: copy the contact to the phone’s memory

or the SIM card.

•

Send via: send the contact via SMS, MMS, e-mail,

or Bluetooth.

•

Group: assign the number to a caller group.

Memo: add a memo about the person.

Delete: delete the selected contact or all contacts.

3. Press <Save> to save the contact.

2. Press <Add>. The list of contacts stored in your

Storing a number on the SIM card

1. Select SIM

phone’s memory is displayed.

3. Press [ ] to select specific contacts you want to

2. Enter a name and press [Down].

add to the selected group and press <Select>.

3. Enter a phone number and press [Down].

4. Change the location number, if necessary.

5. Press <Save> to save the contact.

4. To add more members, press <Options> and

select Add

→

a contact.

5. Repeat step 4 as desired.

Group (Menu 2.3)

Managing caller groups

While viewing the group list, press <Options> to

access the following options:

Use this menu to organise your contacts in caller

groups.

•

View: display the members of the selected group.

Add: add a new group.

Creating a new caller group

1. Press <Options> and select Add

Edit: change the properties of the selected group.

2. Enter a name for the group.

Send message: send an SMS, MMS, or e-mail

message to the member(s) you want.

3. Select the Caller ID line and select an image.

4. Select the Ringtone line and select a melody.

5. Press <Save> to save the group.

•

Delete: delete the selected group or all groups.

Group members, however, are not deleted from

Phonebook.

Adding members to a caller group

1. Select a group.

Menu functions

Speed dial (Menu 2.4)

My name card (Menu 2.5)

Use this menu to assign a speed dial number (2 to 9)

for eight of your most frequently called numbers.

Use this menu to create a name card and send it to

other people.

Assigning speed dial numbers

Saving your name card

1. Select a key location from

for your voice mail server.

9. [1] is reserved

The procedure for creating your name card is the

same as the one for saving a phone number in the

phone’s memory.ꢀp. 32

2. Select a contact you want from the contact list.

Using name card options

Managing speeds dial entries

After saving your name card, press <Options> to

access the following options:

From the Speed dial screen, press <Options> to

access the following options:

•

Edit: edit the name card.

•

Add: assign a number to an unassigned key.

Send: send the name card via SMS, MMS, e-mail,

or Bluetooth.

View: show the number assigned to the key.

Change: assign a different number to the

assigned key.

•

Exchange name card: exchange name cards with

another person via Bluetooth.

•

Remove: clear the speed dial setting.

Delete: delete the name card.

Dialling speed dial entries

Press and hold the appropriate key in Idle mode.

3.Enter the phone password and press <OK>.

Own number (Menu 2.6)

The password is preset to 00000000. You

Use this feature to check your phone numbers, or to

assign a name to each of the numbers. Changes made

here do not affect the actual subscriber numbers on

your SIM card.

can change this password.ꢀp. 83

4.Press <Yes> again to confirm the deletion.

•

Memory status: display the number of contacts

you have stored in Phonebook.

Management (Menu 2.7)

Use this menu to manage Phonebook.

Service number (Menu 2.8)

•

Default saving: select a default memory location

to save contacts.

This menu is available if your SIM card supports

Service Dialling Numbers (SDN). Use this menu to

view the list of SDNs assigned by your service

provider, including emergency numbers, directory

enquiries, and voice mail numbers.

If you select Ask on saving, the phone will ask

you to select a memory location when saving a

number.

•

Copy all to phone: copy all of the contacts stored

on the SIM card to the phone’s memory.

1. Scroll to the number you want and press <View>.

2. Press <Dial> or [ ].

Delete all: delete all of the contacts from your

phone’s memory, your SIM card, or both.

1.Press [ ] to check the location(s) to be cleared.

2.Press <Delete>.

Menu functions

•

Upgrade: check the game version and update the

game, if the version is outdated.

Applications (Menu 3)

Use this menu to play Java games, to play music files,

to record a voice memo, to set time zones and alarms,

or to use the phone as a calculator, timer, converter, or

stopwatch. You can also synchronise Phonebook or

calendar data in the phone’s memory with a computer.

•

Protection: protect the game from being deleted.

Send information: send game properties via

SMS.

Accessing Java settings

To access this menu, press <Menu> in Idle mode and

You can select a connection profile for accessing Java

services.

select Applications

From the Java world menu, select Settings and then

a profile.

Java world (Menu 3.1)

Use this menu to access and play Java games and to

select a profile for accessing Java services.

You can edit a profile using the Connection

settings menu.ꢀp. 84

Using Java game options

Checking memory status

From the Java world menu, select Downloads and

press <Options> to access the following options:

You can view the amount of total memory for the Java

games as well as the amount of available and used

memory. You can also view the number of downloaded

games.

•

Launch: launch the selected game.

Delete: delete the selected game or all games,

except for embedded games.

From the Java world menu, select Memory status

•

Properties: view game properties.

•

Add files: add specific files to the play list.

MP3 player (Menu 3.2)

3. If you selected Add files, press [ ] to check the

Use this menu to enjoy music. First, you need to save

MP3 files in your phone’s memory.

files to be added and press <Select>.

4. Press <Back> to go back to the MP3 player

Downloading or receiving music files

screen.

Use these methods to save MP3 files to your phone’s

memory:

Playing music files

From the MP3 player screen, press [ ].

During playback, use the following keys:

•

Download from the wireless web

ꢀp. 43

Download from a computer using the Samsung PC

Studio program

Guide

ꢀSamsung PC Studio User’s

Keys

Function

Pauses or resumes playback.

Goes to the previous file.

Skips to the next file.

Opens the play list.

•

Via an active Bluetooth connectionꢀp. 83

Left

Right

The downloaded or received files are stored in the

Music folder. p. 60

ꢀ

Creating a play list

Add MP3 files to the play list.

Down

Stops playback.

1. From the MP3 player screen, press <Options

Adjusts the volume level.

Turns the 3D sound on or off.

Changes the skin type.

and select Add to playlist

2. Select either of the following options:

•

Add all: add all of the files in the phone’s

memory to the play list.

Menu functions

Shuffle: set the MP3 player to play music in

random order.

Keys

Function

Changes the repeat mode

Changes the equalizer mode

Turns shuffle mode on or off.

Equalizer: select an equalizer setting.

3D sound: turn 3D sound on or off.

Skin: select a skin type.

Volume: select a volume level.

Using MP3 file options

Lock volume key: lock [

] to keep accidental

presses from affecting playback.

From the MP3 player screen, press <Options> to

access the following options:

•

Properties: view the properties of the file.

•

Play: begin playback.

Accessing the play list

1. From the MP3 player screen, press <Options

Open playlist: display the play list.

Go to music: go to the Music folder.

and select Open playlist to access the play list.

Send via: send the currently selected file via

e-mail or Bluetooth.

2. Press <Options> to access the following options:

•

Play: play the currently selected file.

Add to playlist: add files to the play list.

Change order: move the selected file to the

position you want within the play list.

Remove: remove the selected file or all files

from the play list.

•

Set as: set the file as your ring tone or as a caller

alert melody for a Phonebook entry.

Remove from playlist: remove the selected file

from the play list.

•

Settings: change the default settings for playing

music files.

Properties: view the properties of the file.

Repeat mode: select a repeat mode.

•

Properties: view the properties of the voice

memo.

Voice recorder (Menu 3.3)

Use this menu to record voice memos. A voice memo

can be up to one hour long.

Playing a voice memo

1. From the Voice recorder screen, press <Options

Recording a voice memo

and select Go to voice list

1. Press [ ] to start recording.

2. Speak into the microphone.

Press [ ] to pause or resume the recording.

2. Select a voice memo. The memo plays.

During playback, use the following keys:

Keys

Function

3. When you finish, press <Stop>. The voice memo

is saved automatically.

Pauses or resumes playback.

Moves backward.

Moves forward.

4. Press [Up] to record another voice memo, or press

Left

Right

Down

<Options> to access the following options:

•

Play: play back your voice memo.

Record: record another voice memo.

Go to voice list: display the voice memo list.

Send via: send the voice memo via MMS,

e-mail, or Bluetooth.

Stops playback.

Adjusts the volume.

Using voice memo options

•

Delete: delete the voice memo.

Rename: change the name of the voice memo.

Protection: protect the voice memo from

being deleted.

From the Voice recorder screen, press <Options> to

access the following options:

•

Record: record a new voice memo.

Menu functions

•

Go to voice list: go to the list of voice memos you

have recorded.

Applying Daylight Savings Time

1. From the world map, press <Options> and select

Set daylight saving time

•

Setting: select a recording time setting.

2. Press [ ] to check the time zone(s) you want.

Limit for MMS: record a voice memo for adding to

an MMS message.

3. Press <Save>.

Limit for Email: record a voice memo for adding

to an e-mail.

Alarm (Menu 3.5)

Max 1 hour: record a voice memo for up to one

hour.

Use this menu to set alarms to sound at specific times.

Setting an alarm

1. Select the type of alarm.

World time (Menu 3.4)

2. Press [Left] or [Right] to select On on the Alarm

Use this menu to set your local time zone and find out

what time it is in another part of the world.

line and press [Down].

3. Enter the time for the alarm to sound and press

[Down].

Setting your local time zone

1. From the world map, press [Left] or [Right] to

select the city that corresponds to your home time

zone. As the time line moves, the time and date of

the given zone display.

4. Select AM or PM in 12-hour time format and press

[Down].

5. Select a repeat option.

6. Select the Alarm tone line and select an alarm

2. Press <Options> and select Save to save the

melody.

time zone.

7. Press <Save>.

Stopping an alarm

Creating a synchronisation profile

1. Press <Add>.

•

When an alarm sounds, press <Exit> or any key

to stop the alarm.

2. Specify the following information for the profile:

•

When a wake-up call alarm sounds, press

•

Profile name: enter the profile name.

Sync category: select the applications you

want to synchronise.

Sync type: select a synchronisation type.

Sync protocol: select a connection method.

<Confirm> or [ ] to stop the alarm.

Otherwise, press <Snooze> or any key to stop

the alarm and cause it to sound again after 5

minutes. You can do this a maximum of five times.

•

Setting the alarm to ring even if the phone is

off

3. Press <Save> to save the profile.

Starting synchronisation

From the Alarm screen, select Auto power

→

On.

1. Make sure that your PC has MS Outlook and the

WideSync program installed, and the phone and

the PC are connected by a USB cable or an active

Bluetooth connection.

If the phone is off when it is time for the alarm to ring,

the phone is switched on and sounds the alarm.

PIM sync (Menu 3.6)

2. Open MS Outlook.

Use this menu to synchronise personal data with

corresponding PC applications by using the WideSync

program supplied with your phone.

3. From the PIM sync screen, select a profile.

4. Press [ ].

Menu functions

2. Press one of the Navigation keys to access the

math function you want.

Using synchronisation options

From the PIM sync screen, press <Options> to access

the following options:

3. Enter the second number.

4. Press [ ] to view the result.

•

Start sync: start a synchronisation for the

selected profile.

Converter (Menu 3.8)

•

View result: show the result of the last

synchronisation.

Use this menu for common conversions, such as

currency and temperature.

•

New sync profile: add a new profile.

1. Select a converter.

Edit sync profile: change the properties of the

profile.

2. Press [Left] or [Right] to select the original unit

and press [Down].

•

Delete: delete the selected profile or all profiles.

3. Enter the value to be converted and press [Down].

Calculator (Menu 3.7)

•

Press [ ] to insert a decimal point.

Press [ ] to change the temperature to above

zero (+) or below zero (-).

Use this menu to perform basic arithmetic functions,

such as addition, subtraction, multiplication, and

division.

For the currency converter, you can view and

set up the rates by pressing <View rate>.

1. Enter the first number.

Press the left soft key to insert a decimal point or

bracket.

4. Press [Left] or [Right] to select the unit you want

to convert to.

To move the cursor, press

[

] or [

The equivalent value for the amount you entered

displays.

2. Press [ ] to check an interval. You can repeat this

step for a total of 4 intervals.

Timer (Menu 3.9)

Use this menu to set a period of time for the phone to

count down. The phone will sound an alarm when the

specified period of time has expired.

3. To reset the stopwatch, press <Reset>.

Starting the timer

1. Press <Set>.

Browser (Menu 4)

The Wireless Application Protocol (WAP) browser on

your phone allows you to access the wireless web.

Using the WAP browser, you can access up-to-date

information and a wide variety of media content, such

as wallpapers, ring tones, and music files.

2. Enter the length of time you want to count down

and press <OK>.

3. Press [ ] to start counting down.

Stopping the timer

To access this menu, press <Menu> in Idle mode and

•

Press <Exit> or any key when the timer rings.

select Browser

Press [ ] on the Timer screen to stop the timer

before it rings.

Home (Menu 4.1)

Stopwatch (Menu 3.0)

Use this menu to connect your phone to the network

and load the home page of the wireless web service

provider. You can also press [ ] in Idle mode.

Use this menu to measure elapsed time. The precision

of the stopwatch is one one-hundredth of a second.

The maximum measurement time is 10 hours.

1. Press [ ] to start the stopwatch.

Menu functions

•

Inbox: access WAP push messages in the WAP

browser.

Navigating with the WAP browser

Press

Show images: display images on the current

page.

scroll through browser items

select a browser item

[Up] or [Down].

Certificates: display the WAP browser certificate.

<Options> and

select Select

Exiting the WAP browser

Press [ ] to exit the browser.

return to the previous page

Options> and

select Back

Bookmarks (Menu 4.2)

Using WAP page options

Use this menu to save URL addresses in order to

quickly access websites.

From any WAP page, press <Menu> to access the

following options:

Adding a bookmark

1. Select an empty location.

•

Bookmarks: display the Bookmarks list.

Reload: reload the current page.

2. Enter a name for the bookmark.

3. Enter a URL address and press <Save>.

Home: go back to the home page.

Go to URL: enter a URL address manually.

Accessing a bookmarked page

Show URL: display the URL address of the current

web page. You can also set the current page as the

home page for the WAP browser or a bookmark.

Scroll to a bookmark item and press [ ].

•

Clear cache: clear the cache memory.

Using bookmark options

Messages (Menu 5)

After saving an item, press <Options> to access the

following options:

Use the Messages menu to send and receive text

messages, multimedia messages, and e-mails. You

can also use WAP push message, and cell broadcast

message features.

•

Go to URL: access the bookmarked website.

Edit: edit the address and name of the bookmark.

Delete: delete the selected bookmark or all

To access this menu, press <Menu> in Idle mode and

bookmarks.

select Messages

http:// (Menu 4.3)

Create message (Menu 5.1)

Use this menu to manually enter the URL address of a

website and access the website.

Use this menu to create and send SMS, MMS, or

e-mail messages.

Text message (Menu 5.1.1)

WAP profile (Menu 4.4)

Short Message Service (SMS) allows you to send or

receive text messages that may include pictures,

animated images, and melodies.

Use this menu to select a connection profile for

accessing the WAP browser.

You can edit a profile using the Connection

The maximum number of characters allowed in a

text message varies by service provider. If your

message exceeds the maximum number of

characters, the phone will split the message.

settings menu.ꢀp. 84

Clear cache (Menu 4.5)

Use this menu to clear the cache, a temporary

memory that stores recently accessed web pages.

Menu functions

1. Enter your message.

4. Enter a destination number.

2. Press <Options> to access one of the following

To send the message to more than one recipient,

press [Down] and fill in additional destination

fields.

options:

•

Save and send: both save a copy of the

message and send the message.

Send only: send the message.

Insert: add a template, Phonebook entry, or

bookmark.

5. Press [ ] to send the message.

•

Multimedia message (Menu 5.1.2)

Multimedia Message Service (MMS) delivers messages

containing a combination of text, image, video, and

audio, from phone to phone or from phone to e-mail.

•

Add picture/Add animation/Add melody:

attach a picture, animated image, or melody.

Attach: attach a name card or calender data

as a data format attachment.

Save to: save the message in the Drafts box

or one of the folders you have created.

Language select: change the language used

in T9 input mode.

1. Select the Subject line and enter the message

subject.

2. Select the Picture&Video or Sound line and add

an image, a video, or a sound file.

The maximum size allowed for an MMS message

can differ depending on the country. If you

cannot attach another file, add another page.

•

Text style: change the text attributes.

Input method: change the text input mode.

3. Select the Message line and enter the message

3. When you have finished, press <Options> and

select Save and send or Send only

text.

4. Press <Options> to access the following options:

•

Attach: attach a name card or calender data

as a data format attachment.

•

Add: add a subject or text to your message.

Edit: edit the subject or text of your message.

Add image/Add video/Add sound: add

photos, videos, or sounds to the message.

Depending on the file type or DRM (Digital Rights

Management) system, some files may not be able

Clear subject/Clear message: clear the

subject or text.

Remove media/Remove sound: remove an

added item.

5. When you have finished, press <Options> and

select Send

to be forwarded

•

Change image/Change video/

6. Enter a phone number or e-mail address.

Change sound: change an added item.

Preview: display the message you have

created.

To send the message to more than one recipient,

press [Down] and fill in additional destination

fields.

•

Send: send the message.

7. Press [ ] to send the message.

Save to: save the message in the Drafts box

or one of the folders you have created.

Add page: add pages. Move to each page by

pressing [Left] or [Right] on the message

screen.

Delete page: delete an added page.

Edit page: change the duration of page display

or move the page forward.

Email (Menu 5.1.3)

You can send e-mails that include text, audio, and

images. To use this feature, you need to subscribe to

an e-mail service and set up your e-mail account and

•

profile.ꢀp. 58, p. 58

•

1. Select the Subject line and enter the subject of

your e-mail.

2. Select the Message line and enter the e-mail text.

Menu functions

3. Press <Options> to add multimedia files by

selecting the following options in the File attach

line:

•

Remove subject

the subject or text.

Remove attachment: delete the selected

attachment.

Remove all attachment: delete all

attachments.

/Remove message: clear

•

Add image/Add video/Add sound/Add

musics: add items stored in the phone’s

memory. Depending on the file type or DRM

(Digital Rights Management) system, some files

5. When you have finished, press <Options> and

select Send

may not be able to be forwarded

•

Other files: add files in a format which your

phone does not support.

Attach: attach a name card or calender data

as a data format attachment.

6. Enter an e-mail address.

To send the e-mail to more than one recipient,

press [Down] and fill in additional destination

fields.

4. When you have finished, press <Options> to

7. Press [ ] to send the e-mail.

access the following options:

Options may vary depending on the selected

field.

My messages (Menu 5.2)

Use this menu to store all of the messages you have

received, sent, or failed to send.

•

Edit: edit the subject or text.

View Play: display/play an added item.

Inbox (Menu 5.2.1)

Send: send the e-mail.

Save to: save the message in the Drafts box

or one of the folders you have created.

This folder stores all of the messages you have

received, except for e-mails.

•

CB messages

Viewing a message at the time of its receipt

Delivery report for your sent messages

When a message has been received, the phone alerts

you by:

• According to the DRM (Digital Rights

Management) system, messages having web

content may not be able to be forwarded.

•

Displaying a message icon with text notification

Sounding a tone or vibrating, depending on the

message alert setting.

They are indicated by

• A ! icon next to a message means that a

message is of high priority. A grey-coloured

message icon is of low priority.

To read a message immediately, press <View> and

select a message from the Inbox.

For an MMS message, press <Options> and select

Retrieve. The message is downloaded from the MMS

server to the phone’s memory.

While viewing the message list, press <Options> to

access the following options:

Options may vary depending on your country or

service provider.

Viewing a message in Inbox

The following icons may appear on the message list;

depending on the message type or status, icons may

vary:

•

View: open the message.

Retrieve: retrieve the MMS message from the

•

SMS

server.

MMS

•

Delete: delete the message.

MMS notification;

being retrieved from the server and

indicates that retrieval has failed

indicates that an MMS is

Move to My folder: move the message to one of

the folders you have created in the My folders

menu.

•

WAP push messages/OTA messages

Menu functions

•

Sort by: change the sort order of the messages.

MMS messages

•

Protection: protect the message from being

deleted.

•

Reply via SMS: send a reply message via SMS.

Reply via MMS to: send a reply message via

MMS.

Using message options

•

Forward: forward the message to another person.

While viewing a message, press <Options> to access

the following options:

Delete: delete the message or all messages.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

SMS messages

•

Reply: reply to the sender.

Forward: forward the message.

Delete: delete the message.

•

Cut media: save media content from the message

into your phone’s memory.

Protection: protect the message from being

deleted.

Move to phone/SIM: move the message between

the SIM card and the phone’s memory.

Properties: view the message properties.

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

OTA messages

•

Install: apply the configuration specified in the

message to your phone.

Cut media: save media content from the message

into your phone’s memory.

•

Delete: delete the message.

Protection: protect the message from being

deleted. You can protect only those messages

stored in the phone’s memory.

Protection: protect the message from being

deleted.

WAP push messages

Drafts (Menu 5.2.2)

•

Go to URL: connect to the URL specified in the

message.

This folder stores messages you have saved to send at

a later time.

•

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

Press <Options> to access the following options:

•

Edit: edit the message.

•

Delete: delete the message.

Delete: delete the message or all messages.

Protection: protect the message from being

deleted.

Move to My folder: move the message to one of

the folders you have created in the My folders

menu.

CB messages

•

Save: save the message to the phone’s memory.

•

Sort by: change the sort order of the messages.

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

Protection: protect the message from being

deleted.

•

Delete: delete the message.

•

Properties: view the message properties.

Delivery report messages

Outbox (Menu 5.2.3)

•

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

This folder stores messages that the phone is

attempting to send or has failed to send.

•

Delete: delete the message.

In this folder, the following icons are available:

Protection: protect the message from being

deleted.

•

Messages that the phone is sending

Messages that the phone has failed to send

Menu functions

While viewing a message or the message list, press

•

Send: send the message.

<Options> to access the following options:

Delete: delete the message or all messages.

•

View: display the message.

Move to My folder: move the message to one of

the folders you have created in the My folders

menu.

•

Delete: delete the message or all messages.

•

Move to My folder: move the message to one of

the folders you have created in the My folders

menu.

•

Sort by: change the sort order of the messages.

Forward: forward the message to other people.

•

Sort by: change the sort order of the messages.

Send again: send the message.

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

Forward: forward the message to other people.

•

Protection: protect the message from being

deleted.

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

Properties: view the message properties.

•

Protection: protect the message from being

deleted.

Email box (Menu 5.2.5)

This folder stores e-mails that you have received.

1. Select an e-mail account.

•

Properties: view the message properties.

Sent (Menu 5.2.4)

2. Press <Yes> when Check new Email is displayed

This folder stores messages that you have sent.

to get new mails from the server.

The phone checks for new e-mails and retrieves

received e-mails.

While viewing a message or the message list, press

<Options> to access the following options:

•

View: open the message.

The following icons may appear on the message

list; depending on the e-mail status, icons may

vary:

While viewing the e-mail content or message list,

press <Options> to access the following options:

Options may vary depending on the status of the

e-mail.

•

has been read

has not been read

has been retrieved from the server

has not been retrieved;

•

View: open the selected item.

Retrieve: retrieve one or all of the e-mails from

the e-mail server.

indicates that

an e-mail is being retrieved from the

•

Reply: send a reply to the sender or to all of the

other recipients.

server and

failed

indicates that retrieval has

•

Forward: forward the e-mail.

! icon next to a message means that a

message is of high priority. A grey-

coloured message icon is of low priority.

Delete: delete the currently selected item.

Move to My folder: move the e-mail to one of the

folders you have created in the My folders menu.

3. Scroll to an e-mail or header and press [ ].

•

Add to filtering list: add the sender’s e-mail

address to the filter list to reject e-mails from that

address.

4. If the e-mail has more than one page, press [

to scroll through pages one by one.

]

Press [Left] or [Right] to move to the first or last

page.

•

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

5. Select an attached file to view or play it.

Cut media: save media content from the message

to your phone’s memory.

Menu functions

•

Check new Email: check the Email box for new

e-mails.

Templates (Menu 5.3)

Use this menu to make and use templates of

frequently used messages.

•

Protection: protect the e-mail from being deleted.

Properties: view the properties of the e-mail.

Creating a text template

1. Select an empty location.

My folders (Menu 5.2.6)

Use this menu to create new folders and store and

organise your messages.

2. Enter a message and press <OK>.

Using template options

Creating a new folder

1. Press <Yes>.

From the template list, press <Options> to access

the following options:

2. Enter a folder name and press <OK>.

3. To create more folders, press <Options> and

•

Edit: edit the template.

Send message: send a new message using the

template.

select Add folder

4. Repeat step 3 as desired.

•

Delete: delete the template.

Using folder options

Add new: add a new template.

On the folder list, press <Options> to access the

following options:

Delete all (Menu 5.4)

Use this menu to delete messages in each message

folder one by one, or all at once. You can also delete

all messages in all folders at one time.

•

Open: open the folder.

Add folder: add a new folder.

Rename folder: change the name of the folder.

Delete: delete the selected folder.

Bearer selection: select either GSM or GPRS

preferred, depending on your network.

Settings (Menu 5.5)

Use this menu to set up various options for using the

messaging service.

•

Current profile: select a profile.

Profile settings: set the following properties in a

profile:

Text message (Menu 5.5.1)

You can configure default SMS settings for sending or

receiving messages.

Service centre: store or change the number of

your message centre.

•

Send settings: set up the following options for

sending a text message:

Default destination: enter the default

destination. It will be displayed in the first field on

the Recipients field.

Reply path: allow the recipient to reply to you

through your message centre.

Default type: set the default message type. The

network can convert the messages into the

selected format.

Delivery report: set the network to inform you

when your message has been delivered.

Character support: select a character encoding

type. If you select Automatic, the phone switches

the encoding type from GSM-alphabet to Uni-

code if you enter an Uni-code character. Use of

Uni-code encoding will reduce the maximum

number of characters in a message to about half.

If this menu is not shown, your phone provides the

Automatic character encoding by default.

Default validity: set the length of time your

messages are stored in the SMS centre while

attempts are made to deliver them.

Setting name: enter a profile name.

Menu functions

Reject unknown sender: reject messages from

unknown senders.

Multimedia message (Menu 5.5.2)

You can configure default MMS settings for sending or

receiving messages.

Advert allowed: accept advertisements.

Information allowed: accept information

messages.

•

Send settings: set up the following options for

sending a multimedia message:

Personal allowed: accept personal messages.

Delivery report: set the network to inform you

when your message has been delivered.

Report allowed: send a delivery report from the

network to the sender.

Hide address: set your address to be hidden from

the recipient’s phone.

Home reception: determine if your phone

retrieves new messages automatically when you

are in your home service area.

Read reply: determine whether or not the phone

sends a read-reply request.

Roaming reception: determine if your phone

retrieves new messages automatically when you

are roaming in another network.

Priority: set the priority level of your messages.

Expiry date: set the length of time your messages

are stored in the message centre.

Home reception and Roaming reception have

the following options:

Delivery time: set a time delay before messages

are sent.

•

Automatic: the phone automatically retrieves

messages from the server.

Outgoing message size: select a maximum size

of attached items allowed for an MMS message.

•

Reject: the phone rejects all messages.

Manual: the phone displays notifications. Use

the Retrieve option to manually download new

messages.

•

Retrieve settings: set up the following options

for receiving a multimedia message:

•

Profile: select a connection profile to be used for

MMS.

Edit name: edit the name in your signature.

Edit telephone number: edit the phone number

in your signature.

You can edit a profile using the Connection

settings menu.ꢀp. 84

Edit note: edit the tag line in your signature.

•

Receive settings: set up the following options for

receiving an e-mail:

Email (Menu 5.5.3)

You can configure default network settings that are

required to send or receive e-mails.

Check interval: determine how often the phone

checks the server for incoming e-mails.

You cannot change e-mail profile settings while an

e-mail is being sent or retrieved.

If you set this option to Do not notify, you can

use the Check new Email feature to check your

e-mail manually.

•

Send settings: set up the following options for

sending an e-mail:

Read reply: determine whether or not the phone

sends a read-reply request.

Delivery report: set the network to inform you

when your e-mail has been delivered.

When this option is set to Announce, the phone

reminds you to send a read-reply request with

your e-mail address.

Reply to address: set the network to send a

request for a reply along with your e-mail to the

recipient.

Reject if larger than: determine the maximum

size for incoming e-mails. Your phone will reject

e-mails that exceed the specified size.

Priority: select the priority level of your e-mail.

Include signature: attach your name, phone

number, a simple memo, or a tag line to your

e-mail.

Leave a copy of messages on the server: leave

copies of e-mails after retrieving.

Menu functions

•

Block list: specify e-mail addresses from which

messages will not be accepted. You can also

specify e-mail subjects that you will not accept.

The following options are available when the

protocol type is POP3

•

POP3 server: enter the IP address or domain

•

Email account: set up an e-mail account and

select an account to be used.

name of the server that receives your e-mail.

POP3 port: enter the POP3 port number.

APOP login: connect to the server by using

the APOP login scheme when this option is

selected.

•

Current account: select an account.

Account settings: configure up to five e-mail

accounts using different e-mail servers. The

following options are available for each account:

These options are available when the protocol type

is IMAP4

•

Account name: enter a name for the currently

selected account.

•

IMAP4 server: enter the IP address or domain

name of the server that receives your e-mail.

IMAP4 port: enter the IMAP4 port number.

Include attachments: select this option to

receive attachments with e-mails.

•

User name: enter a user name.

Email address: enter your e-mail address.

User ID: enter your e-mail ID.

Password: enter your e-mail password.

SMTP server: enter the IP address or domain

name of the outgoing e-mail server.

SMTP port: enter the SMTP port number.

Protocol type: select the protocol for the

incoming e-mail server. The remaining options

depend on the protocol type setting.

•

Email retrieval limit: set the number of

headers you will retrieve from the server.

•

Email profile: select a connection profile to be

used for e-mail services.

•

You can edit a profile using the Connection

settings menu.ꢀp. 84

Push message (Menu 5.5.4)

Memory status (Menu 5.6)

You can change the settings for receiving WAP push

messages from the wireless web server. The following

options are available:

Use this menu to view the maximum memory and

available memory for each message type. You can also

view the memory currently in use in each folder.

•

Receive: set how your phone receives push

messages.

File manager (Menu 6)

The File manager menu allows you to access images,

videos, music files, and sound files stored in the

phone’s memory.

•

Service centre: enter the address of the server

from which you want to receive push messages,

when the Receive option is set to SMS-C

specific

To access this menu, press <Menu> in Idle mode and

select File manager.

Broadcast (Menu 5.5.5)

You can change the settings for receiving CB

messages. The following options are available:

According to the DRM (Digital Rights Management)

system, web content may not be able to be

•

Receive: select the reception of CB messages.

forwarded. The content is indicated by

Channel list: indicate the channels from which

you wish to receive CB messages. Please contact

your service provider for further details.

Images (Menu 6.1)

•

Language: select the preferred language in which

broadcast messages display.

This menu displays photos you have taken and images

downloaded or received in messages.

Menu functions

•

Send via: send the video clip via MMS, e-mail, or

Bluetooth.

Viewing an image

1. Select an image folder.

2. Scroll to an image and press [ ].

Set as wallpaper: set the video clip, if saved for

adding to MMS messages or e-mails, as your

wallpaper for the idle screen.

Using image options

While viewing an image or the image list, press

•

Delete: delete the video clip.

<Options> to access the options.

ꢀp. 69

Rename: change the name of the video clip.

Move to Favourite videos: move the file to the

Favourite videos folder.

Videos (Menu 6.2)

This menu displays video clips you have recorded,

downloaded, or received in messages.

•

Share for bluetooth: set whether or not to

prevent the video clip from being accessed from

other Bluetooth devices.

Video clips recorded on other devices, such as

camcorders, may not play correctly.

•

Protection: protect the video clip from being

deleted.

Playing a video clip

1. Select a video folder.

Properties: view the properties of the video clip.

2. Scroll to a clip and press [ ].

ꢀp. 72

Music (Menu 6.3)

Using video options

This menu displays MP3 files you have downloaded,

received in messages, or imported from your

computer.

While viewing the video list, press <Options> to

access the options.

•

Play: play the video clip.

Playing a music file

Scroll to a file and press [ ].ꢀp. 37

Using music options

Playing a sound clip

1. Select a sound folder.

2. Scroll to a clip and press [ ].

While viewing the music list, press <Options> to

access the following options:

•

Play: begin playback.

Using sound options

Send via: send the file via e-mail or Bluetooth.

Add to playlist: add a file to the play list.

While viewing the sound list, press <Options> to

access the following options:

Set as: set the file as your ring tone or as a caller

alert melody for a Phonebook entry.

•

Play: play the sound file.

Send via: send the file via MMS, e-mail, or

Bluetooth.

•

Delete: delete the selected file or all files.

Rename: change the file name.

•

Set as: set the file, if downloaded, as your ring

tone or as a caller alert melody for a Phonebook

entry.

Share for bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

•

Delete: delete the selected file or all files.

•

Protection: protect the file from being deleted.

Rename: change the file name.

Properties: view the properties of the file.

Move to Favourite sounds: move the file to the

Favourite sounds folder.

Sounds (Menu 6.4)

•

Share for bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

This menu displays sound files you have recorded,

downloaded, or received in messages.

Menu functions

•

Protection: protect the file from being deleted.

Memory status (Menu 6.6)

•

Properties: view the properties of the file.

You can check the total amount of memory for media

items and the amount of memory currently in use in

each media box.

Other files (Menu 6.5)

Files that you have received but which are not

supported by your phone are stored in this folder. You

cannot open these files on the phone. Unsupported file

formats include *.doc, *.ppt, and *.txt.

Calendar (Menu 7)

The calendar feature enables you to keep track of your

schedule and to-do list, to view missed alarm events,

and to make a memo.

While viewing the file list, press [ ] to access the

following options:

•

Send via: send the file via e-mail, or Bluetooth.

Delete: delete the selected file or all files.

Rename: change the file name.

To access this menu, press <Menu> in Idle mode and

select Calendar

Consulting the calendar

Share for bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

When you enter the Calendar menu, the calendar in

Month view appears with today’s date indicated by a

blue box.

•

Protection: protect the file from being deleted.

Properties: view the properties of the file.

The number of events for the specific day appears at

the bottom of the calendar. The following icons

indicate the type of event:

Creating an event

You can schedule up to 400 events on the calendar,

and schedule more than one event per day.

•

Scheduled event

To-do item

•

Anniversary

Memo

Entering a new scheduled event

1. Scroll to a date on the calendar.

Press <Options> to access the following options:

2. Press <Options> and select Create

→

Schedule.

•

View mode: change the view mode of the

calendar.

3. Enter information or change the settings in the

following entry fields:

•

Create: add a new event.

•

Subject: enter the title of the event.

Details: enter event details.

Go to: go to the current date or enter a specific

date.

Start date and Start time: enter the starting

date and time for the event.

AM/PM: select AM or PM in 12-hour time

format.

End date and End time: enter the ending date

and time for the event.

AM/PM: select AM or PM in 12-hour time

format.

Location: enter information about the event

location.

•

Sort by: sort items by the type of event.

•

Delete: delete event(s) stored on the calendar.

You can only delete scheduled event with a

repeating alarm on Day view.

•

Missed alarm events: view events whose alarms

you have missed.

Memory status: view the memory status for

items stored in the phone’s memory.

Alarm: set an alarm for the event.

Menu functions

•

Before: set how long before the event the

alarm is to alert you.

•

Alarm time: enter the time for the alarm to

sound.

AM/PM: select AM or PM in 12-hour time

format.

Alarm tone: select an alarm tone.

Repeat every year: select to set the phone to

remind you of the anniversary every year.

•

Alarm tone: select an alarm tone.

Repeat: select to set the event to recur and a

repeat unit.

Until: if the event will recur, set the ending

date.

•

4. Press <Save> to save the event.

Entering a new anniversary

Entering a memo

1. Select a date on the calendar.

2. Press <Options> and select Create

3. Enter a memo and press <Save>.

2. Press <Options> and select Create

→

Memo.

Anniversary

3. Enter information or change the settings in the

following entry fields:

Entering a to-do item

1. Select a date on the calendar.

2. Press <Options> and select Create

•

Occasion: enter information about the

anniversary.

→

To do

3. Enter information or change the settings in the

following entry fields:

•

Date: enter the date.

Alarm: select to set an alarm for the

anniversary.

•

To do: enter information about the item.

Start date: enter the starting date.

Due date: enter the ending date.

•

Before: set how long before the event the

alarm is to alert you.

Select priority: select a priority level.

4. Press <Save> to save the event.

•

Delete: delete event(s) stored on the calendar.

Missed alarm events: view events whose alarms

you have missed.

Viewing an event

Square brackets on a calendar date indicate the

following type of events scheduled for that day:

•

Memory status: view the memory status for

items stored in the phone’s memory.

•

Blue: scheduled event • Orange: anniversary

Red: to-do item Green: memo

Viewing an event in different mode

•

By default, the calendar appears in Month view mode.

1. Select a date on the calendar to display the events

for the day.

Press <Options> and select View mode to change

the mode.

2. Select an event to view its details.

Day view

While viewing an event or the event list, press

You can view events for the selected date.

Select an event to view its details.

Options> to access the following options:

View: display the event details.

Edit: edit the event.

•

The following icons will be displayed according to the

event’s type and status:

•

Create: add a new event.

•

Alarm set

•

Send via: send the event via SMS, MMS,

e-mail, or Bluetooth.

Recurring event

Completed to-do

•

View mode: change the view mode of the

calendar.

To-do priority; its colour indicates the priority

level (Red: high, Blue: normal, and Grey: low)

Sort by: sort items by the type of event.

Menu functions

Week view

Using missed alarm options

You can view events (only for items stored for

Schedule) for the selected week.

From the event list, press <Options> to access the

following options:

•

View: display the event details.

Delete: delete the event.

A cell on the timetable indicates the presence of event

information.

Select the cell that contains the event you want.

Delete all: delete all events.

Viewing a missed alarm event

Camera (Menu 8)

You can use the camera module embedded in your

phone to take photos and record videos.

When you are unable to acknowledge an alarm, the

phone displays a missed alarm notification.

•

Press <View> to view the corresponding event.

To access this menu, press <Menu> in Idle mode and

select Camera, or press and hold [

Press <Exit>.

Accessing missed alarm event

1. Press <Options> and select Missed alarm

• Do not take photos of people without their

permission.

• Do not take photos in a place where cameras are

not allowed.

• Do not take photos in a place where you may

interfere with another person’s privacy.

events

2. Select an event.

3. Press <Confirm> to confirm and delete the event.

Taking a photo

5. To

use photo options

Press

Options>.

You can take photos in various modes using the

phone. The camera produces JPG photos.

ꢀp. 69

delete the photo

[

] and then <Yes>.

When you take a photo in direct sunlight or in bright

conditions, shadows may appear on the photo.

return to Capture mode

Preview>.

1. Access the Camera menu to turn on the camera.

Using camera options in Capture mode

The image to be captured appears on the display.

In Capture mode, press the left soft key to access the

following options:

2. If necessary, direct the camera lens by sliding the

camera lens swap switch up or down.

•

Record video: switch to Record mode.

3. Adjust the image by aiming the camera lens at the

subject.

Shooting mode: take a photo in the following

modes:

•

Press the left soft key to access the camera

options.

Single shot: take a photo in normal mode.

Multi shot: take a series of action stills. Select the

number of photos the camera will take and the rate

at which the photos are taken.

•

Use the keypad to change the camera settings

or switch to other modes.

4. Press [ to take a photo. The photo is saved in

the Photos folder.

ꢀp. 68

]

Mosaic shot: take several stills and save them in

one frame. Select the number of still images the

camera will take and whether the camera shutter

is released automatically or manually.

Menu functions

•

Effects: change the colour tone or apply a special

effect to photos to be taken in normal mode.

Using the keypad in Capture mode

You can use the keypad to customise your camera

settings in Capture mode.

•

Frames: apply a decorative frame to photos to be

taken in normal mode.

Key

Function

•

Flash: determine the flash use.

Flips the image vertically.

Shows the mirror image.

Timer: set a time delay before the camera takes a

photo.

•

Go to photos: go to the Photos folder.

Determines the flash use when held down.

Adjusts the brightness of the image.

Settings: change the default settings for taking a

photo.

Left/

Right

Size: select an image size.

Up/

Down

Zooms in or out.

Quality: select an image quality setting.

Viewfinder mode: select a preview screen.

Shutter sound: select the sound that you hear

Switches to Record mode.

ꢀp. 70

when you press the shutter release, [

Changes the image size.

•

Short cuts: view the functions of the keys you can

use.

Changes the image quality.

Changes the camera mode.

Changes the colour tone or applies a special

effect to the photo.

•

Rename: change the name of the photo.

Go to photos: go to the Photos folder.

Key

Function

Reduces the distortion on the image to

maximise detail and sharpness.

Protection: protect the photo from being deleted.

Properties: view the properties of the photo.

Selects a decorative frame.

Sets the timer.

Viewing a photo

1. In Capture mode, press the left soft key and select

Go to photos

Goes to the Photos folder.

Determines the flash use.

Changes the preview screen.

2. Scroll to a photo and press [ ].

While viewing a photo or the photo list, press

Options> to access the following options:

List: return the screen to the photo list.

View: view the photo on the full screen.

•

Using photo options

•

After taking a photo, press <Options> to access the

following options:

•

Send via: send the photo via MMS, e-mail, or

Bluetooth.

•

Take another: return to Capture mode.

•

Set as: set the photo as your wallpaper or as a

caller ID image for a Phonebook entry.

Send via: send the photo via MMS, e-mail, or

Bluetooth.

•

Delete: delete the photo.

•

Set as: set the photo as your wallpaper or as a

caller ID image for a Phonebook entry.

Rename: change the name of the photo.

Delete: delete the photo.

Move to Favourite images: move the photo to

the Favourite images folder.

Menu functions

•

Slide show: display all photos in turn as a slide

show. You can select the rate at which the photos

cycle.

4. Press [

5. Press [

]

to start recording.

or the right soft key to stop recording.

The video is automatically saved in the Video

•

Share for bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

clips folder.

6. To

Press

•

Protection: protect the photo from being deleted.

play back the video clip

use the video options

delete the video clip

return to Record mode

[

Properties: view the properties of the photo.

Options>.ꢀp. 72

] and then <Yes>.

Recording a video

Preview>.

You can record a video of what is displayed on the

camera screen and save it.

Using camera options in Record mode

1. In Capture mode, press [1] to switch to Record

mode.

In Record mode, press the left soft key to access the

following options:

2. If necessary, direct the camera lens by sliding the

camera lens swap switch up or down.

•

Take photo: switch to Capture mode.

3. Aim the camera lens at the subject to adjust the

image.

Effects: change the colour tone or apply a special

effect to a video.

•

Press the left soft key to access the camera

options.

Use the keypad to change the camera settings

•

Flash: determine the flash use.

Timer: set a time delay before the camera starts

recording.

•

or switch to other modes.

ꢀp. 71

•

Go to videos: go to the Video clips folder.

Using the keypad in Record mode

Settings: change the following settings for

recording a video:

You can use the keypad to customise your camera

settings in Record mode:

Recording mode: select a video recording mode.

Keys

Function

Select Limit for message to record a video

suitable for an MMS or e-mail message. The video

clip is saved in 3GP format.

Flips the image vertically.

Shows the mirror image.

Select Normal to record a video within the limit of

the currently available memory.

Determines the flash use when held down.

Adjusts the brightness of the image.

Left/

Right

Size: select a frame size.

Video quality: select an image quality setting.

Screen mode: select a preview screen.

Audio record: record audio with a video clip.

Up/

Down

Zooms in or out.

Switches to Capture mode.ꢀp. 67

•

Short cuts: view the functions of the keys you can

use.

Changes the frame size.

Changes the image quality.

Changes the video recording mode.

Changes the colour tone or applies a special

effect to the video image.

Menu functions

•

Rename: change the name of the video clip.

Keys

Function

Go to videos: go to the Video clips folder.

Reduces the distortion on the image to

maximise detail and sharpness.

Protection: protect the video clip from being

deleted.

Mutes or unmutes the audio.

Sets the timer.

•

Properties: view the properties of the video clip.

Playing a video clip

1. In Record mode, press the left soft key and select

Goes to the Video clips folder.

Determines the flash use.

Changes the preview screen.

Go to videos

2. Scroll to a video clip and press [ ].

During playback, use the following keys on the

display:

Using video options

After recording a video clip, press <Options> to

access the following options:

Keys

Function

Pauses/resumes playback.

Stops playback.

•

Record another: return to Record mode.

Down

Left

Right

Send via: send the video clip via MMS, e-mail, or

Bluetooth.

Skips backward through a file.

Skips forward through a file.

Adjusts the volume.

•

Set as wallpaper: set the video clip, if saved for

adding it to MMS messages or e-mails, as your

wallpaper for the idle screen.

Delete: delete the video clip.

3. Press <Options> to access the following options:

Settings (Menu 9)

Use this menu to customise your phone settings. You

can also reset the settings to their default values.

•

List: return to the video clip list.

Send via: send the video clip via MMS, e-mail,

or Bluetooth.

To access this menu, press <Menu> in Idle mode and

•

Set as wallpaper: set the video clip, if saved

for adding it to MMS messages or e-mails, as

your wallpaper for the idle screen.

Delete: delete the video clip.

Rename: change the name of the video clip.

Move to Favourite videos: move the video

clip to the Favourite videos folder.

Share for bluetooth: set whether or not to

prevent the video clip from being accessed

from other Bluetooth devices.

select Settings

Time & Date (Menu 9.1)

•

Use this menu to change the time and date displayed

on your phone. Before setting the time and date,

specify your time zone in the World time menu.

ꢀp. 40

•

Set time: enter the current time.

AM/PM: select AM or PM in 12-hour time format.

Time format: select time format.

Set date: enter the current date.

•

Protection: protect the video clip from being

deleted.

Properties: view the properties of the video

clip.

•

Starting day of calendar: set which day of the

week the calendar starts with.

Menu functions

Short cut (Menu 9.2.4)

Phone settings (Menu 9.2)

You can use the Navigation keys as shortcut keys to

access specific menus directly from Idle mode. Use

this menu to assign a shortcut to a key.

Many different features of your phone’s system can be

customised to suit your preferences.

Language (Menu 9.2.1)

Assigning a shortcut menu

Use this menu to select one of several languages for

the display text.

1. Select a key.

2. Select the menu to be assigned to the key.

Using shortcut options

Greeting message (Menu 9.2.2)

Use this menu to enter the greeting that is displayed

briefly when the phone is switched on.

Press <Options> to access the following options:

•

Change: assign or change a shortcut menu.

Slide settings (Menu 9.2.3)

Remove: deactivate the shortcut assignment to

the selected key.

Use this menu to set how the phone reacts when you

open it for an incoming call, and when you close it

while using a function.

•

Remove all: deactivate all shortcut assignments.

Extra settings (Menu 9.2.5)

•

Up: set whether or not to answer a call by opening

the phone.

You can activate or deactivate the automatic redialling

feature or anykey answering mode.

•

Down: set whether or not the phone maintains

the menu you are using when you close the phone.

•

Auto redial: set the phone to make up to ten

attempts to redial a phone number after an

unsuccessful call.

When you set Down to Continue operation, the

keypad lock works only in Idle mode.

•

Anykey answer: answer an incoming call by

pressing any key, except [ ] or <Reject>.

When this option is not selected, you must press

] or <Accept> to answer a call.

Skin (Menu 9.3.2)

You can select a skin colour for Menu mode.

LCD brightness (Menu 9.3.3)

[

You can adjust the brightness of the display for

varying lighting conditions.

Display settings (Menu 9.3)

Back light (Menu 9.3.4)

Use this menu to change settings for the display and

light.

You can select the length of time the backlight stays

on and the display is on in Dim mode, in which the

backlight is off.

Wallpaper (Menu 9.3.1)

You can change the settings for the idle screen.

•

Main LCD on: select the length of time the

backlight is on.

•

Main display: select an image or video clip to be

displayed on the display.

•

Main LCD dim: select the length of time the

display is in Dim mode after the backlight turns off.

After a specified time, the display turns off.

•

Text position: select a text position on the

display. If you don’t want to display text in Idle

mode, select Off

Dialling font colour (Menu 9.3.5)

•

Text mode: select a text mode.

Use this menu to select the font colour when entering

a phone number for dialling.

Text colour: select the text colour.

Graphic logo: set the phone to display the service

provider’s logo instead of its name, if you have

downloaded it.

Menu functions

Service light (Menu 9.3.6)

Keypad tone (Menu 9.4.2)

Use this menu to turn on or off the service light which

blinks to indicate that your phone is covered by the

service area or flashes to indicate an incoming call,

message, or alarm.

Use this menu to select the tone that the phone

sounds when you press a key.

You can adjust the keypad tone volume using

[

]

in Idle mode.

Sound settings (Menu 9.4)

Message tone (Menu 9.4.3)

Use this menu to set up the ringer for incoming SMS

messages, MMS messages, e-mails, and CB

messages.

Use this menu to customise various sound settings.

Incoming call (Menu 9.4.1)

Use this menu to select a volume and alert type for

incoming calls.

•

Tone: select one of several message tones.

Alert type: specify how you are to be informed of

any incoming messages.

•

Ringtone: select a ring tone for the call ringer.

Volume: select a ringer volume.

•

Repetition: specify how often the phone informs

you of a new message.

Alert type: specify how you are to be informed of

incoming calls.

Power on/off (Menu 9.4.4)

Melody: the phone rings using the selected ring

tone.

Use this menu to select the melody that the phone

sounds when it is switched on or off.

Vibration: the phone vibrates but not rings.

Slide tone (Menu 9.4.5)

Vibration then melody: the phone vibrates three

times and then starts ringing.

Use this menu to select the tone that the phone

sounds when you open or close the phone.

Quiet mode (Menu 9.4.6)

Network services (Menu 9.5)

Use this menu to set how the phone acts to alert you

to a specific event in Quiet mode, instead of making

sounds.

Use this menu to access network services. Please

contact your service provider to check their availability

and subscribe to them, if you wish.

•

Vibration: set the phone to vibrate.

Call diverting (Menu 9.5.1)

Mute: mute all sound settings.

This network service reroutes incoming calls to a

phone number that you specify.

Extra tones (Menu 9.4.7)

Use this menu to customise additional tones for the

phone.

1. Select a call diverting option:

•

Divert always: divert all calls.

Busy: divert calls when you are on another

call.

•

Minute minder: set the phone to beep every

minute during an outgoing call to keep you

informed of the length of your call.

•

No reply: divert calls when you do not answer

the phone.

Unreachable: divert calls when you are not in

an area covered by your service provider or

when your phone is switched off.

Cancel all: cancel all call diverting options.

•

Connection tone: set the phone to beep when it

is connected to the system.

Alert on call: set the phone to beep when you

receive a new message or when the time for an

alarm comes during a call.

•

2. Select the type of calls to be diverted.

•

Error tone: set the phone to beep when you have

made a mistake or something wrong happens on

the phone.

3. To activate call diverting, select Activate

Otherwise, select Deactivate

Menu functions

4. Move to the Divert to line.

•

Change barring password: change the call

barring password obtained from your service

provider.

5. Enter the number to which calls are to be diverted

and press <Select>.

2. Select the type of calls to be barred.

6. If you selected No reply, move to the Seconds

line and select the length of time the network

delays before diverting a call.

3. Select Activate. To deactivate call barring, select

Deactivate

4. Enter the call barring password supplied by your

Call barring (Menu 9.5.2)

service provider and press <Select>.

This network service allows you to restrict your calls.

1. Select a call barring option:

Call waiting (Menu 9.5.3)

This network service informs you when someone is

trying to reach you while you are on another call.

•

All outgoing: prohibit all outgoing calls.

International: prohibit international calls.

International except to home: only allow

calls to numbers within the current country.

All incoming: prohibit incoming calls.

Incoming while abroad: prohibit incoming

calls when you use your phone outside of your

home country.

1. Select the type of calls to which call waiting option

will apply.

•

2. Select Activate and press <Select>.

To deactivate call waiting, select Deactivate

•

Cancel all: cancel all call barring settings,

allowing calls to be sent and received normally.

Network selection (Menu 9.5.4)

Voice mail server (Menu 9.5.6)

This network service allows you to either automatically

or manually select the network to be used while

roaming outside of your home area.

Use this menu to store the number of the voice mail

server and access your voice mails.

You must enter the voice server number before you

can access your voice mails. Your service provider

can give the voice server number.

You can select a network other than your home

network only if there is a valid roaming agreement

between the two.

•

Connect to voice server: connect to the voice

mail server to allow you to listen to your

messages. You can also connect to the voice mail

•

Automatic: connect to the first available network

when roaming.

•

Manual: select the network you want.

server by pressing and holding [1] in Idle mode.

Voice server number: enter the voice mail

server number.

Caller ID (Menu 9.5.5)

This network service allows you to prevent your phone

number from being displayed on the phone of the

person being called. However, some networks do not

allow the user to change this setting.

Closed user group (Menu 9.5.7)

Use this menu to set incoming and outgoing calls to be

restricted to a selected user group. For details about

how to create a closed user group, contact your

service provider.

•

Default: use the default setting provided by the

network.

Hide number: ensure your number does not

display on the other person’s phone.

•

Index list: add, delete, or activate CUG index

numbers. Press <Options> to access the options

for setting up an index list.

Send number: send your number each time you

make a call.

Menu functions

•

Outside access: enable calls to numbers other

than those in the Closed user group. This feature

depends on the nature of your CUG subscription.

When you select a new band, your phone

automatically searches for all available networks. Your

phone registers with a preferred network within the

band.

•

Default group: enable the default CUG, if you

have set one with your service provider. When

making a call, you are given the option of using

your default CUG, instead of selecting one from the

list.

Bluetooth (Menu 9.6)

Use this menu to activate the Bluetooth feature.

• You cannot use the Bluetooth feature while using

multimedia features such as voice recorder,

camera, and MP3 player, or vice versa.

• Some devices may not be compatible with your

phone.

Deactivate: deactivate the CUG function, if the

default group is enabled or a CUG index is

selected.

Band selection (Menu 9.5.8)

For the phone to make and receive phone calls, it

must register with an available network. Your phone

can handle any of the following types of networks:

GSM 1900 and Combined GSM 900/1800.

Using the Bluetooth feature, you can connect the

phone wirelessly to other Bluetooth devices and

exchange data with them, talk hands-free, or control

the phone remotely.

The country where you purchased your phone

determines the default band that it uses. When you

travel abroad, you may need to change to an

appropriate band.

Bluetooth technology allows free wireless connections

between all Bluetooth-compliant devices within a

range of 10 meters. Since the devices communicate

using radio waves, they do not need to be in line of

sight to each other.

2. Select Search new device

Setting up the Bluetooth feature

If you have searched for devices before, the phone

displays More devices along with the devices you

have searched for previously. To search for new

The Bluetooth menu provides the following options:

•

Activation: activate or deactivate the Bluetooth

feature.

devices, select More devices

My devices: search for connectable Bluetooth

devices.

After searching, a list of devices to which you can

connect displays. The following icons indicate the

kind of device:

My phone’s visibility: allow other Bluetooth

devices to search for your phone.

•

Hands-free or

headset

•

Mobile phone

My phone’s name: assign a Bluetooth device

name to your phone, which is then displayed on

other devices.

•

Computer

Printer

•

PDA

Unknown device

•

Secure mode: determine if the phone asks for

your confirmation when other devices access your

data.

The colour of the icon indicates the status of the

the device:

Bluetooth services: display available Bluetooth

services.

•

Grey for unpaired devices

Blue for paired devices

Red for devices that are currently connected to

your phone

Searching for and pairing with a Bluetooth

device

1. From the Bluetooth setting options, select My

3. Select a device.

devices

Menu functions

4. Enter a Bluetooth PIN code and press <OK>. This

code is used just once and you don’t need to

memorise it.

•

Browse files: search for data from the device

and import data directly to your phone.

Service list: refresh the Bluetooth service list.

Rename: rename the paired device.

•

When the owner of the other device enters the

same code, pairing is complete.

Authorise/Unauthorised device: determine

whether or not the phone asks you to permit

connection when other devices try to connect

to your phone.

Some devices, especially headsets or hands-free

car kits, may have a fixed Bluetooth PIN, such as

0000. If the other device has a code, you must

enter it.

•

Delete: remove the device from the device list.

Sending data via Bluetooth

1. Activate the Bluetooth feature.

Using device options

1. From the device list, scroll to a device you want.

2. Select the application in which the item you want

to send is stored.

2. If your phone didn’t find Bluetooth services for the

selected device, press <Select>.

3. Scroll to the item you want and press <Options>.

3. Press <Options> to access the following options:

4. Select Send via

→

Bluetooth.

Options may vary depending on the paired

device.

The phone searches for devices within range and

displays a list of available devices.

•

Connect: connect to the currently selected

device.

Disconnect: end the connection with the

device.

5. Select a device.

6. If necessary, enter the Bluetooth PIN needed for

pairing and press <OK>.

Receiving data via Bluetooth

Change PIN (Menu 9.7.2)

To receive data via Bluetooth, your phone’s Bluetooth

feature must be active.

Use this menu to change your PIN. The PIN check

feature must be enabled to use this feature.

If an unauthorised Bluetooth device sends data to your

phone, the phone displays a confirmation message. To

receive data, press <Yes>.

Phone lock (Menu 9.7.3)

This feature locks the phone from unauthorised use.

When this feature is enabled, you must enter a 4- to

8-digit phone password each time the phone is

switched on.

Security (Menu 9.7)

Use this menu to protect the phone against

unauthorised use by managing the several access

codes of your phone and SIM card.

The password is preset to 00000000. To change the

password, use the Change password menu.

Change password (Menu 9.7.4)

If you enter an incorrect PIN /PIN 2 three times in

succession, the SIM card is blocked. To unblock it

you need to enter your PUK/PUK2 (Personal

Unblocking Key). The codes are supplied by your

network operator.

Use this menu to change your phone password. The

password is preset to 00000000

Privacy (Menu 9.7.5)

Use this menu to lock all menu functions on the

phone, except for call functions.

PIN check (Menu 9.7.1)

The 4- to 8-digit PIN (Personal Identification Number)

protects your SIM card against unauthorised use.

When this feature is enabled, the phone requires your

PIN each time it is switched on.

When this feature is enabled, you must enter the

phone password to access menu functions. The

password is preset to 00000000

Menu functions

SIM lock (Menu 9.7.6)

Connection settings (Menu 9.8)

The SIM lock feature allows your phone to work only

with the current SIM by assigning a SIM lock code. You

must enter the SIM lock code to use a different SIM

card.

Use this menu to create and customise the profiles

containing the settings for connecting your phone to

the network. You need these settings to use the WAP

browser or send MMS messages or e-mails.

FDN mode (Menu 9.7.7)

Your phone is suited for connecting to the network

by default. If you change the settings without first

checking with your service provider, the WAP, MMS,

and e-mail features may not work properly.

If supported by your SIM card, Fixed Dialling Number

(FDN) mode restricts your outgoing calls to a limited

set of phone numbers. When this feature is enabled,

you can make calls only to phone numbers stored in

the SIM card. To use this feature, you must enter your

PIN2.

Creating a profile

1. Press <New> and specify following information:

•

Profile name: enter a profile name.

Home URL: enter the address of the WAP

homepage of your service provider.

Proxy: activate or deactivate the proxy server.

When this option is activated, the IP address

and Port options are activated.

DNS: activate or deactivate the DNS address.

When this option is selected, DNS1 and DNS2

are activated.

Change PIN2 (Menu 9.7.8)

If supported by your SIM card, the change PIN2

feature changes your current PIN2.

•

Bearer: select the network bearer type.

Advanced settings: change the advanced

options. Depending on the bearer setting,

available options vary.

Using profile options

Press <Options> to access the following options:

•

Edit: edit the profile.

Delete: delete the profile.

When the bearer is set to GPRS

Add new connection: add a new profile.

APN: enter the access point name.

Reset settings (Menu 9.9)

Password: enter the login password.

Use this menu to reset the phone settings, display

settings, and sound settings individually. You can also

reset all the settings in your phone at the same time.

When the bearer is set to GSM

Dial number: enter the PPP phone number.

1. Press [ ] to check the setting category(ies) to be

reset.

Password: enter the login password.

2. Press <Reset> to reset the marked items.

3. Press <Yes> to confirm the reset.

Data call type: select a call type for data

transmission.

4. Enter the phone password and press <OK>.

2. Press <Save> to save the profile.

The password is preset to 00000000. You can

change this password

ꢀp. 83

“Enter PUK”

The PIN code has been entered incorrectly three

Solve problems

•

times in succession, and the phone is now blocked.

Enter the PUK supplied by your service provider.

Help and personal needs

To save the time and expense of an unnecessary service

call, perform the simple checks in this section before

contacting a service professional.

“No service,” “Network failure,” or “Not done”

displays

When you switch on your phone, the following

messages may appear:

•

The network connection has been lost. You may be

in a weak signal area. Move and try again.

•

You are trying to access an option for which you

have no subscription with your service provider.

Contact the service provider for further details.

“Insert SIM card”

•

Be sure that the SIM card is correctly installed.

“Enter password”

You have entered a number but it was not

dialled

•

The automatic locking function has been enabled.

You must enter the phone’s password before you

can use the phone.

Be sure that you have pressed [ ].

Be sure that you have accessed the right cellular

network.

“Enter PIN”

•

You are using your phone for the first time. You

must enter the PIN supplied with the SIM card.

•

Be sure that you have not set an outgoing call

barring option.

•

The PIN check feature is enabled. Every time the

phone is switched on, the PIN has to be entered.

To disable this feature, use the PIN check menu.

Your correspondent cannot reach you

The audio quality of the call is poor

•

Be sure that your phone is switched on. ([

pressed for more than one second.)

]

•

Check the signal strength indicator on the display

). The number of bars indicates the signal

strength from strong ( ) to weak ( ).

(

Be sure that you are accessing the correct cellular

network.

•

Try moving the phone slightly or moving closer to a

window if you are in a building.

Be sure that you have not set an incoming call

barring option.

No number is dialled when you re-call a

Phonebook entry

•

Your correspondent cannot hear you speaking

•

Use the Contacts list feature to ensure the number

has been stored correctly.

Be sure that you have switched on the

microphone.

•

Re-store the number, if necessary.

•

Be sure that you are holding the phone close

enough to your mouth. The microphone is located

at the bottom of the phone.

If the above guidelines do not help you to

solve the problem, take note of:

•

The model and serial numbers of your phone

Your warranty details

The phone starts beeping and “Low battery”

flashes on the display

•

Your battery is insufficiently charged. Recharge the

battery.

A clear description of the problem

Then contact your local dealer or Samsung after-sales

service.

SAR tests are conducted using standard operating

positions with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while

operating can be well below the maximum value. This is

because the phone is designed to operate at multiple

power levels so as to use only the power required to reach

the network. In general, the closer you are to a base

station, the lower the power output of the phone.

Health and safety information

SAR certification information

This phone meets European Union (EU) requirements

concerning exposure to radio waves.

Your mobile phone is a radio transmitter and receiver. It is

designed and manufactured to not exceed the limits for

exposure to radio-frequency (RF) energy, as

recommended by the EU Council. These limits are part of

comprehensive guidelines and establish permitted levels

of RF energy for the general population. The guidelines

were developed by independent scientific organisations

through the periodic and thorough evaluation of scientific

studies. The limits include a substantial safety margin

designed to ensure the safety of all persons, regardless of

age and health.

Before a new model phone is available for sale to the

public, compliance with the European R&TTE Directive

must be shown. This directive includes as one of its

essential requirements the protection of the health and

safety of the user and any other person.

The exposure standard for mobile phones employs a unit

of measurement known as Specific Absorption Rate (SAR).

The SAR limit recommended by the EU Council is 2.0W/

kg.^*

The SAR limit for mobile phones used by the public is 2.0

watts/kilogram (W/kg) averaged over ten grams of body tis-

sue. The limit incorporates a substantial margin of safety to

give additional protection for the public and to account for any

variations in measurements. The SAR values may vary,

depending on national reporting requirements and the network

band.

The highest SAR value for this model phone was 0.397 W/

kg.

•

Extreme temperatures will affect the charging capacity

of your battery: it may require cooling or warming

first.

Do not leave the battery in hot or cold places because

the capacity and lifetime of the battery will be

reduced. Try to keep the battery at room temperature.

A phone with a hot or cold battery may not work

temporarily, even when the battery is fully charged.

Li-ion batteries are particularly affected by

Precautions when using batteries

•

Never use a charger or battery that is damaged in any

way.

•

Use the battery only for its intended purpose.

If you use the phone near the network’s base station,

it uses less power. Talk and standby time are greatly

affected by the signal strength on the cellular network

and the parameters set by the network operator.

temperatures below 0°C (32°F).

•

Battery charging time depends on the remaining

battery charge, the type of battery, and the charger

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out. When

the operation time is noticeably shorter than normal, it

is time to buy a new battery.

•

Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object like a coin,

clip or pen causes a direct connection between the +

and – terminals of the battery (metal strips on the

battery). For example, do not carry a spare battery in

a pocket or bag where the battery may contact metal

objects. Short-circuiting the terminals may damage

the battery or the object causing the short-circuiting.

•

If left unused, a fully charged battery will discharge

itself over time.

Use only Samsung-approved batteries, and recharge

your battery only with Samsung-approved chargers.

Disconnect the charger from the power source when it

is not in use. Do not leave the battery connected to a

charger for more than a week, since overcharging may

shorten its life.

Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

Health and safety information

As with other mobile radio transmitting equipment, users

are advised that for the satisfactory operation of the

equipment and for the safety of personnel, it is

recommended that the equipment should only be used in

the normal operating position (held to your ear with the

antenna pointing over your shoulder).

Road safety

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime. But an

important responsibility accompanies the benefits of

wireless phones, one that every user must uphold.

When you are driving a car, driving is your first

responsibility. When using your wireless phone while

driving, follow local regulations in the country or region

you are in.

Electronic devices

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, certain electronic

equipment may not be shielded against the RF signals

from your wireless phone. Consult the manufacturer to

discuss alternatives.

Operating environment

Remember to follow any special regulations in force in the

area you are in, and always switch off your phone

whenever it is forbidden to use it, or when it may cause

interference or danger.

Pacemakers

Pacemaker manufacturers recommend that a minimum

distance of 15 cm (6 inches) be maintained between a

wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations

are consistent with the independent research and

recommendations of Wireless Technology Research. If you

have any reason to suspect that interference is taking

place, switch off your phone immediately.

When connecting the phone or any accessory to another

device, read its user’s guide for detailed safety

instructions. Do not connect incompatible products.

Hearing aids

Posted facilities

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you may

wish to consult your hearing aid manufacturer to discuss

alternatives.

Switch off your phone in any facility where posted notices

require you to do so.

Potentially explosive environments

Other medical devices

Switch off your phone when in any area with a potentially

explosive atmosphere, and obey all signs and instructions.

Sparks in such areas could cause an explosion or fire

resulting in bodily injury or even death.

If you use any other personal medical devices, consult the

manufacturer of your device to determine if it is

adequately shielded from external RF energy.

Users are advised to switch off the phone while at a

refuelling point (service station). Users are reminded of

the need to observe restrictions on the use of radio

equipment in fuel depots (fuel storage and distribution

areas), chemical plants, or where blasting operations are

in progress.

Your physician may be able to assist you in obtaining this

information.

Switch off your phone in health care facilities when

regulations posted in these areas instruct you to do so.

Vehicles

Areas with a potentially explosive atmosphere are often

but not always clearly marked. They include the areas

below decks on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas, such as

propane or butane, areas where the air contains chemicals

or particles, such as grain, dust or metal powders, and any

other area where you would normally be advised to turn

off your vehicle engine.

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles. Check with

the manufacturer or its representative regarding your

vehicle.

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Health and safety information

Emergency calls

Other important safety information

•

Only qualified personnel should service the phone or

install the phone in a vehicle. Faulty installation or

service may be dangerous and may invalidate any

warranty applicable to the device.

Check regularly that all wireless phone equipment in

your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases, or

explosive materials in the same compartment as the

phone, its parts, or accessories.

For vehicles equipped with an air bag, remember that

an air bag inflates with great force. Do not place

objects, including installed or portable wireless

equipment, in the area over the air bag or in the air

bag deployment area. Improperly installed wireless

equipment could result in serious injury if the air bag

inflates.

This phone, like any wireless phone, operates using radio

signals, wireless, and landline networks as well as user-

programmed functions, which cannot guarantee

connection in all conditions. Therefore, you should never

rely solely on any wireless phone for essential

•

communications like medical emergencies.

To make or receive calls, the phone must be switched on

and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone

features are in use. Check with local service providers.

•

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your present

location. Emergency numbers vary by location.

•

Switch off your phone before boarding an aircraft. It is

dangerous and illegal to use wireless phones in an

aircraft because they can interfere with the operation

of the aircraft.

Failure to observe these instructions may lead to the

suspension or denial of telephone services to the

offender, or legal action, or both.

3. Press

[

Certain features like Call Barring may need to be

deactivated before you can make an emergency call.

Consult this document and your local cellular service

provider.

•

Do not drop, knock, or shake the phone. Rough

handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the phone. Wipe it with a

soft cloth slightly dampened in a mild soap-and-water

solution.

Do not paint the phone. Paint can clog the device’s

moving parts and prevent proper operation.

Do not put the phone in or on heating devices, such as

a microwave oven, stove, or radiator. The phone may

explode when overheated.

Use only the supplied or an approved replacement

antenna. Unauthorised antennas or modified

accessories may damage the phone and violate

regulations governing radio devices.

If the phone, battery, charger, or any accessory is not

working properly, take it to your nearest qualified

service facility. The personnel there will assist you, and

if necessary, arrange for service.

Care and maintenance

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for many

years.

•

Keep the phone and all its parts and accessories out of

the reach of small children.

•

Keep the phone dry. Precipitation, humidity, and

liquids contain minerals that corrode electronic

circuits.

•

Do not use the phone with a wet hand. Doing so may

cause an electric shock to you or damage to the

phone.

•

Do not use or store the phone in dusty, dirty areas, as

its moving parts may be damaged.

Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain

plastics.

•

Do not store the phone in cold areas. When the phone

warms up to its normal operating temperature,

moisture can form inside the phone, which may

damage the phone’s electronic circuit boards.

Calendar • 62

Call cost • 31

Call records

Conference call • 28

Connection tone • 77

Converter • 42

Creating calendar

anniversaries • 64

events • 63

memos • 64

tasks • 64

Creating messages

e-mail • 47

language • 74

settings • 75

Diverting, calls • 77

DTMF tones, send • 28

Index

AB mode, text input • 22

Alarm • 40

Answering

dialled • 30

missed • 30

received • 30

E-mails

Call time • 30

Caller group

creating • 33

managing • 33

Caller ID • 79

Calls

call • 25

creating/sending • 47

deleting • 53

setting • 57

second call • 26

Anykey answer • 75

Auto redial • 74

viewing • 52

MMS • 46

SMS • 46

Emergency calls • 92

External speaker • 27

Backlight time, set • 75

Band selection • 80

Barring, calls • 78

Battery

answering • 25

barring • 78

diverting • 77

holding • 26

redialling • 24

rejecting • 25

transferring • 27

waiting • 78

Deleting

FDN (Fixed Dialling Number)

mode • 84

Forwarding

call records • 29

e-mails • 53

events • 65

messages • 49

missed alarms • 66

phonebook 35

photos • 69

charging • 7

low indicator • 8

precautions • 89

Bluetooth

e-mails • 53

MMS messages • 50

SMS messages • 50

receiving, data • 83

sending, data • 82

settings • 81

Camera

options • 67

photos • 69

videos • 70

CB (Cell Broadcast) messages •

video clips • 73

Delivery reports, message • 55

Dialled calls • 30

Dialling font colour, select • 75

Display

Games • 36

Greeting message • 74

Broadcast messages • 51

Browser, WAP • 43

Health and safety • 88

Holding, call • 26

Characters, enter • 22

Calculator • 42

microphone • 27

My name card • 34

unpacking • 6

Phonebook

Icons, description • 10

Images, downloaded • 59

Inbox, messages

e-mail • 52

Memory status

copying • 32

deleting • 35

editing • 32

managing • 35

options • 32

downloaded items • 62

phonebook 35

Message tone • 76

Messages

Names

entering • 22

MMS • 50

SMS • 49

searching • 31

Network band, select • 80

Network selection • 79

Network services • 77

cell broadcast • 51

e-mail • 47

greeting • 74

MMS • 46

SMS • 45

speed-dialling • 34

International calls • 24

Internet • 43

Photos

deleting • 69

taking • 66

viewing • 69

Java world • 36

web • 51

Outbox, messages • 51

Own number • 35

PIM sync

Minute minder • 77

Missed alarm events • 66

Missed calls • 30

MMS messages

creating/sending • 46

deleting • 50

creating a profile • 41

starting • 41

PIN, change • 83

PIN2, change • 84

Power on/off tone • 76

Privacy • 83

Key tone volume • 76

Keypad tones

selecting • 76

sending • 27

Password

call barring • 78

phone • 83

Phone

setting • 56

viewing • 48

care and maintenance •

display • 10

icons • 10

locking • 83

password • 83

resetting • 85

switching on/off • 8

Language, select • 74

Last number, redial • 24

Locking

Problems, solve • 86

MP3 player

options • 38

playing • 37

Received calls • 30

Received messages

e-mail • 52

Recording

menu functions • 83

phone • 83

SIM card • 84

Multi-party calls • 28

Music, downloaded • 60

Muting

Low battery indicator • 8

videos • 70

key tones • 27

Index

voice memos • 39

Redialling

automatically • 74

manually • 24

Resetting phone • 85

Ringer

incoming calls • 76

messages • 76

Road safety • 90

Roaming • 79

Sound settings • 76

Sounds, downloaded • 61

Speed-dial • 34

Stopwatch • 43

Switching on/off

microphone • 27

phone • 8

Voice mail server

connecting • 79

editing • 79

Voice memos

playing • 39

recording • 39

Voice recorder

playing • 39

recording • 39

Templates • 54

Text input mode, change • 22

Text, enter • 22

Timer • 43

Waiting call • 78

WAP browser

access • 43

Safety

information • 88

Security, calls • 83

Sent messages • 52

Service light • 76

SIM card

inserting • 7

locking • 84

Slide

Tone

connect • 77

bookmarks • 44

cache, clear • 45

World time • 40

keypad • 76

message • 76

minute minder • 77

power on/off • 76

slide • 76

Transferring, calls • 27

setting • 74

tone • 76

SMS messages

creating/sending • 45

deleting • 49

viewing • 49

Videos

deleting • 73

playing • 72

recording • 70

Woods Equipment S20CD User Manual
Sunbeam 3258 User Manual
Sony 8GB Micro Vault USM8GN New Entry Series USB20 Flash Drive USM8GN User Manual
Seagate ST66022FX User Manual
Seagate SAVVIO 15K2 SAS ST9146752SS User Manual
Seagate Constellation ST31000524NS User Manual
Samsung SGH S307 User Manual
Panasonic SL CT680V User Manual
Panasonic HYBRID IP PBX KX TDA100 User Manual
Nokia N2626 User Manual