* Some of the contents in this manual may differ from your
phone, depending on the software installed or your
service provider.
Printed in Korea
Code No.: GH68-05964A
English. 11/2004. Rev.1.2
World Wide Web
http://www.samsungmobile.com
Contents
Important safety precautions........................... 7
Unpacking ........................................................ 9
Your phone..................................................... 10
Phone layout........................................................... 10
Display................................................................... 13
Backlight ................................................................ 16
Camera.................................................................. 16
Plug-in speaker ....................................................... 17
Built-in antenna....................................................... 17
Getting started............................................... 18
Inserting/Removing the SIM card............................... 18
Installing/Removing/Charging the battery................... 19
Switching the phone on or off.................................... 23
Selecting functions and options.................................. 24
Locking or unlocking the keypad................................ 26
Call functions ................................................. 27
Making a call........................................................... 27
Ending a call ........................................................... 30
Answering a call ...................................................... 30
Rejecting a call........................................................ 30
Adjusting the volume ............................................... 31
Accessing options during a call .................................. 31
Using the headset.................................................... 40
Using the plug-in speaker ........................................ 40
Entering text .................................................. 41
Changing the text input mode ................................... 42
Using T9 mode........................................................ 43
Using ABC mode...................................................... 45
Using symbolic mode ............................................... 48
Using number mode................................................. 48
Using the menus ............................................ 49
Accessing a menu function........................................ 49
List of menu functions.............................................. 50
Phonebook menu............................................ 56
3
Contents
Find name .............................................................. 56
Add entry ............................................................... 59
Speed-dial list ........................................................ 60
Copy all to phone..................................................... 62
Send all via infrared................................................. 63
Delete all................................................................ 65
Own number........................................................... 66
Group setting.......................................................... 67
Memory status ........................................................ 68
Service directory ..................................................... 68
SAT (SIM Application Toolkit) ....................... 69
Call records .................................................... 70
Missed calls............................................................. 70
Received calls ......................................................... 70
Dialled calls ........................................................... 71
Delete all................................................................ 71
Call time................................................................. 72
Call costs................................................................ 72
Network services............................................ 74
Call diverting........................................................... 74
Call barring............................................................. 76
Call waiting............................................................. 79
Network selection .................................................... 80
Caller ID................................................................. 81
Band selection......................................................... 81
Active line............................................................... 82
Sound settings ............................................... 83
Incoming calls......................................................... 83
Messages................................................................ 84
Power on/off ........................................................... 85
Connection tone ...................................................... 85
Key tone................................................................. 86
Minute minder......................................................... 86
Quiet mode............................................................. 86
Slide tone............................................................... 87
Alerts on call........................................................... 87
Messages........................................................ 88
Short messages....................................................... 88
Multimedia messages ............................................... 95
4
Contents
Push messages...................................................... 106
Preset messages.................................................... 107
Voice mail............................................................. 107
Broadcast............................................................. 108
Settings ............................................................... 110
Memory status ..................................................... 114
Fun box ........................................................ 115
WWW services....................................................... 115
Media box............................................................. 121
JAVA world ........................................................... 125
Melody composer................................................... 130
Organiser ..................................................... 134
New memo ........................................................... 134
Calendar............................................................... 136
To do list.............................................................. 139
Clock ................................................................... 140
Alarm................................................................... 142
Voice recorder....................................................... 144
Calculator............................................................. 146
Conversion ........................................................... 147
Timer................................................................... 149
Stopwatch ............................................................ 150
Camera......................................................... 151
Take photos.......................................................... 151
My photos............................................................. 157
My albums............................................................ 157
Delete all.............................................................. 157
Settings .............................................................. 158
Memory status ...................................................... 159
Phone settings ............................................. 160
Display................................................................. 160
Greeting message.................................................. 162
Language ............................................................. 162
Security ............................................................... 163
Auto redial............................................................ 166
Voiceclarity........................................................... 166
Slide settings ....................................................... 167
Anykey answer...................................................... 167
Infrared activation ................................................. 168
Reset settings ....................................................... 168
5
Contents
Using ALS (Alternate Line Service)............... 169
Solving problems.......................................... 171
Access codes ................................................ 174
Phone password .................................................... 174
PIN...................................................................... 174
PIN2 .................................................................... 175
PUK ..................................................................... 175
PUK2 ................................................................... 175
Call barring password............................................. 176
Health and safety information...................... 177
SAR certification information ................................... 177
Precautions when using batteries............................. 178
Road safety .......................................................... 180
Operating environment........................................... 180
Electronic devices .................................................. 181
Potentially explosive atmospheres............................ 183
Emergency calls .................................................... 183
Other important safety information .......................... 184
Care and maintenance............................................ 185
Glossary ....................................................... 187
Index ........................................................... 191
Quick reference card .................................... 195
6
Important safety
precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road safety at all times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching off in aircraft
Wireless phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching off near all medical equipment
Switch off your phone near the medical equipment.
Hospitals or health care facilities may be using
equipment that could be sensitive to external RF
energy. Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special regulations
Meet any special regulations in force in any area and
always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
Water resistance
Your phone is not water-resistant. Keep it dry.
7
Important safety precautions
Sensible use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on, especially when the phone
is in service.
Emergency call
Key in the emergency number for your present
location, then press the
key. Give all the
necessary information as accurately as possible. Do
not cut off the call until given permission to do so.
Keeping small children away from your phone
Keep the phone and all its parts including
accessories out of the reach of small children.
Accessories and batteries
Use only Samsung-approved accessories. Use of any
unauthorised accessories could damage your phone
and may be dangerous.
Use only Samsung-approved batteries and recharge
your battery only with Samsung-approved chargers.
Qualified service
Only qualified service personnel may install or repair
your phone.
For more detailed safety information, see “Health
and safety information” on page 177.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE
DISPOSE USED BATTERIES ACCORDING TO THE
INSTRUCTIONS
8
Unpacking
Your package contains the following items:
Travel adapter
Phone
Battery
Owner’s manual
Plug-in speaker
Note: The items supplied with your phone may be
different depending on the country.
In addition, you can obtain the following
accessories for your phone from your local
Samsung dealer:
• Advanced handsfree car kit
• Simple handsfree car kit
• PC data link kit
• Headset
9
Your phone
Phone layout
The following illustrations show the main elements
of your phone:
(Reverse side)
Flash
Camera
Mirror
Earpiece
Display
Navigation keys
(Up/Down/Left/
Right)
Ear-microphone
jack
Soft key (left)
Volume keys
Soft key (right)
WAP Browser
Power On/Off /
Menu exit key
key
Dial/Menu
confirmation key
Camera key
Alphanumeric
keys
Cancel/Back/
Correction key
IrDA port
Special
function keys
Microphone
Charger
connector
10
Your phone
h
Key(s)
Description
Perform the functions indicated by the
text above them, on the bottom line of
the display.
(soft keys)
In menu mode, scroll through the menu
options.
In idle mode, the Left key enters the
New SMS message writing screen,
the Right key enters the Incoming
call’s melody setting menu and the
Down key enters the Voice recorder
menu. The Up key enters the Camera
menu, when pressed and held, it
switches the phone to the capture
mode.
In idle mode, launches the WAP
(Wireless Application Protocol) browser
directly.
Makes or answers a call.
In idle mode, accesses the call log list.
In menu mode, selects a menu function
or stores information that you have
entered, such as a name in the phone
or SIM memory.
Deletes characters from the display.
When pressed and held in idle mode,
quickly accesses the New memo
screen.
In menu mode, returns to the previous
screen.
11
Your phone
Key(s)
Description (continued)
Ends a call.
When pressed and held, switches the
phone on or off.
In menu mode, cancels your input and
returns to idle mode.
When pressed and held in idle mode,
quickly accesses your voice mail server.
Enter numbers, letters and some
special characters.
Used for various purposes in different
functions.
When pressed and held while entering a
phone number, the
pause.
key enters a
When pressed and held in idle mode,
the
key enters or exits the quiet
mode.
(on the left side of the phone)
During a call, adjust the earpiece
volume.
In idle mode, adjust the key tone
volume.
In the capture mode, flip the picture
vertically by pressing the volume up
key and horizontally by pressing the
volume down key.
12
Your phone
Key(s)
Description (continued)
(on the right side of the phone)
When pressed and held, turns the
camera capture mode on. In capture
mode, works as a camera shutter.
Display
Display layout
The display has three areas:
Icons
Text and
graphic area
Soft keys
indications
Menu
Phonebook
Area
Description
First line
Displays various icons. See
page 14.
Middle
Display messages, instructions
and any information that you
enter, such as number to be
dialled.
Last line
Shows the functions currently
assigned to the two soft keys.
13
Your phone
Icons
Icon Description
Shows the received signal strength. The
more bars, the stronger the signal.
Appears when a call is in progress.
Appears when you are out of a service
area. When it displays, you cannot make
or receive calls.
Appears when you have new or
unchecked voice messages. When your
SIM card supports ALS (Alternate Line
Service), this icon may appears like
, or
,
.
Appears when you have new or unread
messages.
Appears when you have new or
unchecked multimedia messages.
Appears when you are retrieving a
multimedia message.
Appears when you are sending a
multimedia message.
Appears when you set an alarm to sound
at the specified time.
Appears when the IrDA port is active. For
details, see page 168.
Appears when you connect the phone to
the computer by the IrDA port.
14
Your phone
Icon Description (continued)
Appears when you are connected to a
GPRS-enabled network.
Appears when the call diverting feature is
activated. When your SIM card supports
ALS (Alternate Line Service), this icon
may appear with the number 1, 2, or
both. For example,
,
, or
.
Appears when you are in your home zone.
Only if your service provider supports this.)
(
Appears when you are in your office zone.
Only if your service provider supports this.)
(
Appears when you set the alert type for
incoming calls to Vibration or Vibration
then melody. For further details, see
page 84.
Appears when the quiet mode is active.
Shows the level of your battery. The more
bars you see, the more power you have
left.
15
Your phone
Backlight
The display and the keypad are illuminated by a
backlight. When you press any key, the backlight
illuminates. It turns off if you don’t press any key
within a given period of time, depending on the
Backlight menu option. For further details, see
page 161.
Camera
The camera embedded in your phone allows you to
take a picture of people or events while on the
move.
For further details about using the Camera feature,
see page 151.
(Reverse side)
16
Your phone
Plug-in speaker
With the plug-in speaker, you can hear sounds more
loudly.
To use it, take off the cover and then connect the
plug-in speaker to the ear-microphone jack at the
right side of the phone.
Built-in antenna
Your phone has a built-in antenna. As with other
mobile radio transmitting equipment, do not touch
the antenna unnecessarily when the phone is
switched on. Contact with the antenna affects call
quality and may cause the phone to operate at a
higher power level than needed.
17
Getting started
Inserting/Removing the SIM card
When you subscribe to a cellular network, you are
provided with a SIM card loaded with your
subscription details, such as your PIN, any optional
services available and so on.
• Keep all miniature SIM cards out of the reach of
small children.
• The SIM card and its data can be easily damaged
by scratches or bending, so be careful when
handling, inserting, or removing the card.
• When installing the SIM card, always make sure
that the phone is switched off before you remove
the battery.
Inserting the SIM card
1. If necessary, remove the battery by referring to
page 20.
2. Insert and slide the SIM card under the tab,
ensuring that the notched corner is top left and
the gold contacts of the card face into the
phone.
18
Getting started
Removing the SIM card
To remove the SIM card, slide it out, as shown, and
remove it from the socket.
Installing/Removing/Charging the
battery
Your phone is powered by a rechargeable Li-ion
battery. Use only approved batteries and chargers.
Ask your local Samsung dealer for further details.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
standard battery is fully recharged in
approximately 130 minutes.
Installing the battery
1. Insert the teeth on the top of the battery into
the corresponding slots on the phone.
19
Getting started
Charging the battery by using the travel
adapter
Note: The phone can be used while the battery is
being charged, but this causes the battery to
charge more slowly.
1. Plug the travel adapter connector into the jack
at the bottom of the phone.
Check that the arrow on the connector is facing
towards the front of the phone.
2. Plug the adapter into a standard AC wall outlet.
While charging, the battery icon at the top right
corner of the display repeatedly fills to show that
the battery is charging.
21
Getting started
3. When charging is finished, disconnect the
adapter from the power outlet and from the
phone by pressing the grey tabs on both sides of
the connector and pulling the connector out.
Low battery indicator
When the battery is weak and only a few minutes of
talk time remain, the battery sensor informs you in
the following ways: an empty battery icon flashes
(
), you hear a warning tone and a message
repeats at regular intervals on the display.
When the battery becomes too weak for the phone
to operate, it switches off automatically.
22
Getting started
Switching the phone on or off
To switch the phone on:
1. Hold down the
switches on.
key until the phone
2. If the phone asks for a PIN, enter the PIN and
press the OK soft key. For further details, see
page 174.
The phone searches for your network and the
current date and time appear on the display.
Once connected to a network, you can make or
receive calls.
Service Provider
Mon 21 Jun 04
12:53
Menu
Phonebook
Note: To change the language, use the
Language menu option. For further
details, see page 162.
To switch the phone off:
Hold down the
displays.
key until the power-off image
23
Getting started
Selecting functions and options
Your phone offers a set of functions that allows you
to customise your phone. These functions are
arranged in menus and sub-menus, accessed via
the two soft keys marked
and
. Each menu
and sub-menu allow you to view and alter the
settings of a particular function.
The roles of the soft keys vary according to the
function you are currently using; the labels or icons
on the bottom line of the display, just above the soft
keys, indicates its current role.
Example:
Service Provider
Mon 21 Jun 04
12:53
Menu Phonebook
Press the right soft
key to access the
Phonebook feature.
Press the left soft
key to access the
menu functions.
24
Getting started
To view various functions/options available, or
select the one is required:
1. Press the appropriate soft key.
2. To
select the:
Press the
Select soft key.
• function displayed
• option highlighted
view the next function or Down key.
highlight the next option
on a list
move back to the
previous function or
option on a list
Up key.
move back up one level
in the structure
(or Back) soft
key or key.
C
return to idle mode
key.
In some functions, you may be asked for a
password or PIN. Enter the required code and press
the OK soft key.
25
Getting started
Locking or unlocking the keypad
You can lock the soft keys, navigation keys, WAP
brower key, volume keys and camera key to avoid
pressing keys by accident.
To lock the keys, slide the folder down.
Note: Be careful with your finger when you slide the
folder down.
If you select the Stop operation from the Down
option in the Slide settings menu (see page 167),
the phone locks the keys automatically when you
slide the folder down.
Otherwise, if you select the Continue operation
from the Down option in the Slide settings menu
(see page 167), the confirming message appears
on the display a few minutes after you slide the
folder down in the idle mode. In the message, you
can lock the keys by pressing the Yes soft key. If
you don't press the Yes or No soft keys in the
confirming message, the phone locks the keys after
a little while.
To unlock the keys, slide the folder up, press the
Unlock soft key, or press the
soft key and then
press the OK soft key again.
26
Call functions
Making a call
Using the number keypad
When the idle screen is displayed, enter the area
code and phone number, and press the
key.
Note: If you have set the Auto redial option to On
,
the number is redialled automatically up to ten
times if the person you called does not answer,
or the line is busy. For further details, see
page 166.
Correcting the number
To clear
Press the
C key.
the last digit
displayed
any other digit in
the number
Navigation keys until the
cursor (|) is immediately to
the right of the digit to be
cleared and press the
C
key.
You can also insert a missing
digit simply by pressing the
appropriate key with the
cursor in the appropriate
position.
all digits displayed
C
key and hold it down for
more than one second.
27
Call functions
Making an international call
1. Press and hold the
0
key for the international
prefix. The + character will appear when the
phone is ready for further input.
2. Enter the country code, area code and phone
number and press the
key.
Making a call from Phonebook
You can store the names and phone numbers called
regularly in the SIM card and phone’s memory,
which are jointly referred to as the Phonebook. You
then do not need to remember all your numbers;
simply select the required name to recall the
associated number.
For further details about the Phonebook feature,
see page 56.
Using the call logs
The phone stores up to 20 calls you have dialled,
received or missed chronologically. The last call is
saved in the first position. If the same number
occurs more than once, only the latest occurrence is
saved.
To recall any of these numbers:
1. Press the
log list.
key in idle mode to access the call
2. Use the Up or Down key to scroll through the list
until the number you want highlights.
The call logs are listed with the following icons:
•
•
•
: Dialled calls
: Received calls
: Missed calls
28
Call functions
3. To dial the number, press the
key.
To view each call record, see “Call records” on
page 70.
Viewing missed calls
If you have a subscription that includes the Caller
Line Identification (CLI) feature and you are unable
to answer a call for any reason, you can find out
who was calling you so that you can call the person
back.
The number of missed calls displays on the idle
screen immediately after a call was missed.
To view the missed calls immediately:
1. Press the Missed soft key.
The list of the missed calls displays.
2. If necessary, scroll to the number you want by
pressing the Up or Down key.
3. To dial the number, press the
key.
To use the missed call options, see “Missed calls” on
page 70.
Note: To clear the missed call notification on the
display, press the
key. When you also
have voice mails, short messages, or
multimedia messages and multi CBs, the right
soft key indication changes in the following
order: Missed
,
Connect, View, CB and
Phonebook
.
Speed-dialling from Phonebook
Once you have stored numbers in your Phonebook,
you can dial a number simply by pressing one or
two keys. For further details, see page 60.
29
Call functions
Ending a call
When you want to finish your call, briefly press the
key.
Note: If you select the Continue operation from the
Down option in the Slide settings menu, you
cannot finish your call by sliding the folder down.
Answering a call
When somebody calls you, the phone rings and
displays the incoming call image.
If the caller can be identified, the caller’s phone
number, or name if stored in the Phonebook, will be
displayed.
To answer a call, press the
key, or Accept soft
key. Or, slide the folder up if you select the Accep
call from the Up option in the Slide settings menu.
Note: You can answer a call while using Phonebook or
menu features. The current operation will be
stopped if interrupted.
Rejecting a call
To reject an incoming call, press the
slide the folder down.
key, or
Note: If you select the Continue operation from the
Down option in the Slide settings menu, you
cannot reject your call by sliding the folder
down.
30
Call functions
Adjusting the volume
During a call, if you wish to adjust the earpiece
volume, use the volume keys on the left side of the
phone.
When you hear a sound, such as ringtone, you can
also adjust the earpiece volume. The adjusted
volume level will be temporary. It will return to it’s
default setting.
Note: When a call comes in, you can mute the call
ringer by pressing and holding one of the
volume keys.
Accessing options during a call
Your phone provides a number of control functions
that you can use during a call.
Using the loudspeaker
You can speak and listen to the phone from a short
distance without holding the phone to your ear.
Turn on / off the loudspeaker
1. Press the Options soft key.
2. Press the Up or Down key to highlight the
Normal
/
Speaker on option. Press the Select
soft key.
CAUTION: Do not hold the phone near to your ear
when you use the loudspeaker. Volume may be
extremely loud.
31
Call functions
Switching the microphone off (Mute)
You can temporarily switch your phone’s
microphone off so that the other person cannot
hear you.
Example: You may wish to say something to
another person in the room but do not
want the calling person to hear you.
1. Press the Options soft key.
2. When Mute highlights, press the Select soft
key.
The mute icon (
) appears on the bottom line
of the display and your correspondent cannot
hear you.
To switch the microphone back on:
1. Press the Options soft key.
2. When Unmute highlights, press the Select soft
key.
The mute icon disappears and your
correspondent can hear you.
Searching for a number in Phonebook
You can search for a number in your Phonebook
during a call.
1. Press the Options soft key.
2. If necessary, press the Up or Down key to
highlight the Phonebook option. Press the
Select soft key.
32
Call functions
3. Select the Find name option and press the
Select soft key.
The Phonebook entries are listed.
4. Enter the first a few letters of the name that you
want to find.
The Phonebook entries are listed starting with
the first entry matching your input.
Note: You can also scroll through Phonebook from
the beginning, by pressing the Up or Down
key
.
5. To view the highlighted entry, press the OK soft
key.
For further details about the Phonebook feature,
see page 56.
Muting/Sending key tones
You can turn the key tones off or on during a call.
When the Mute keys option is selected, your phone
does not transmit the key tones. It allows you to
press keys without hearing annoying key tones
during a call.
To communicate with answering machines or
computerised telephone systems, the Send keys
option must be selected.
Sending DTMF tones
You can send the DTMF(Dual Tone Multi-Frequency)
tones of the number on the display during a call.
This option is helpful for entering a password or
account number when you call an automated
system, like a banking service.
33
Call functions
To send the DTMF tones:
1. When you are connected to the teleservice
system, press the Options soft key.
2. Press the Up or Down key to highlight the Send
DTMF option. Press the Select soft key.
3. Enter the number you want to send and press
the OK soft key.
The tones of the displayed number are sent.
Using the message service
You can read or write a new message during a call.
1. Press the Options soft key.
2. Press the Up or Down key to highlight the
Message option. Press the Select soft key.
3. To read a received message, select the Inbox
option, and then scroll to the message that you
want to read.
To write a new message, select the Create
option.
4. Press the Select soft key.
For further details about the SMS feature, see
page 88.
Using the voiceclarity
The voiceclarity feature makes received sound loud
and clear during a call. It is useful when you are in
a noisy place.
34
Call functions
The phone turns on the voiceclarity feature
automatically after a while when you are in a noisy
place and the voiceclarity is set to on.
Turn on / off the voiceclarity
1. Press the Options soft key.
2. Press the Up or Down key to highlight the
Voiceclarity on / Voiceclarity off option.
Press the Select soft key.
Note: You cannot activate the voiceclarity when you
use the loudspeaker and handsfree car kit.
Using the Conv. record
You can record a conversation during a call.
1. Press the Options soft key.
2. Press the Up or Down key to highlight the Conv.
record option. Press the Select soft key to start
recording the conversation.
3. To stop recording, press the Stop soft key. The
recording also stops if the recording time
expires. The recorded conversation is saved in
your phone automatically.
4. To hear the recorded conversation, see the Fun
box menu.
Using the SAT (SIM Application Toolkit)
If you use a SAT card that provides additional
services, the SAT menu displays. For further details,
see your SIM card instructions.
35
Call functions
Putting a call on hold
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can switch between the
calls.
To place a call on hold, press the Options soft key
and select the Hold option. You can reactivate the
call whenever you want by pressing the Retrieve
soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you want to dial or
look it up in Phonebook.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or alternatively:
1. Put the current call on hold by pressing the
Options soft key and select the Hold option.
2. Make the second call in the normal way.
To switch between the two calls, press the Options
soft key and select the Swap option.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other person.
To end the call on hold, press the Options soft key
and select the End held call option.
When you want to finish, end each call normally by
pressing the
key.
36
Call functions
Note: If you select the Continue operation from the
Down option in the Slide settings menu, you
cannot finish your call by sliding the folder
down.
Answering a second call
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and you have activated the Call waiting
option (see page 79). You will be notified of an
incoming call by a call waiting tone.
To answer a call while you have another call in
progress:
1. Press the
key to answer the incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the
Options soft key and select the Swap option.
3. To end the call on hold, press the Options soft
key and select the End held call option.
To end the current call, press the
The call on hold is continued.
key.
Transferring a call
You can transfer the current call to the call on hold
if this service is supported by the network, so that
the callers can talk to each other. You will be
disconnected from both of them.
1. During a call, answer or make a call in the
normal way, and press the Options soft key.
2. Press the Up or Down key to select the Transfer
option and press the Select soft key.
The two people are connected to each other.
37
Call functions
Making a multi-party call
Multi-party calling is a feature of some networks
that allows up to six people to take part
simultaneously in a multi-party or conference call.
For more information, contact your service provider.
Setting up the multi-party call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
3. To join the first participant to the multi-party
call, press the Options soft key and select the
Join option. Press the Select soft key.
4. To add a new person to the multi-party call, call
the person in the normal way. Then press the
Options soft key and select the Join option.
Press the Select soft key.
You can add incoming callers by answering the call
and selecting the Join option. Repeat as needed.
Having a second call during a multi-party call
To answer a call when you have the multi-party call:
1. Press the
key to answer the incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the
Options soft key and select the Swap option.
3. To end the call on hold, press the Options soft
key and select the End held multiparty option
or End held call option.
To end the current call, press the
The call on hold is continued.
key.
38
Call functions
To make a call when you have the multi-party call:
See “To make a call while you have a call in
progress:” on page 36.
To answer an incoming call when you have the
multi-party call in progress and another call on
hold:
1. Press the Accept soft key.
2. Select the End held option to end the call on
hold.
Or, select the End current option to end the call
in progress.
And then you can answer the new call.
Having a private conversation with one
participant
1. Press the Options soft key and select the Split
option. Press the Select soft key.
2. Press the Up or Down key to highlight a
participant and press the Select soft key.
Now you can talk privately with that person. The
other participants can continue to converse with
each other
3. To return to the multi-party call, press the
Options soft key and select the Join option.
4. Press the Select soft key.
All of the multi-party call participants can now
hear each other.
Removing one participant
1. Press the Options soft key and select the
Remove option.
39
Call functions
2. Press the Up or Down key to highlight a
participant and press the Select soft key.
The call ends with that participant, but you can
continue to talk with the other participants.
3. End the multi-party call by pressing the
key.
Using the headset
With the headset, you can make or answer a call
without holding the phone.
When you connect the headset to the jack at the
right side of the phone, the button on the
headset works as listed below:
To
Press
redial the last call
answer a call
the button twice in idle mode.
and hold the button when you
receive the call.
end a call
and hold the button when you
have finished the call.
Using the plug-in speaker
With the plug-in speaker, you can hear sounds more
loudly.
To use it, connect the plug-in speaker to the jack at
the right side of the phone.
40
Entering text
At many times while you are using your phone, you
need to enter text, such as when storing a name in
Phonebook, writing a new message, creating a
personal greeting, or scheduling events on your
calendar.
You are provided with the following text input
modes:
•
T9 mode*
This mode allows you to enter words with only
one keystroke per letter. Each key on the keypad
has more than one letter – when you press the
key once, J, K, or L may be displayed. The T9
mode automatically compares your keystrokes
5
with an internal linguistic dictionary to determine
the correct word, thus requiring far fewer
keystrokes than the traditional ABC mode.
•
ABC mode
This mode allows you to enter letters by pressing
the key labelled with the required letter once,
twice, three, or four times until the letter
displays.
•
•
Number mode
This mode allows you to enter numbers.
Symbolic mode
This mode allows you to enter special characters.
*
is a registered trademark of Tegic Communications,
Inc. and is licensed under U.S. Patent 5,818,437/
5,953,541/ 6,011,554.
41
Entering text
Changing the text input mode
When you are in a field that allows characters to be
entered, you will see the text input mode indicator
at the bottom of the display.
Example: Entering a name in Phonebook
Enter name
Text input mode indicator:
T9 English mode
20
OK
Eng
To change to another text input mode:
1. Press the right soft key indicating the current
text input mode.
2. Scroll to the mode you want to use by pressing
the Up or Down key.
The Language select option allows you to
change the text input language.
You can use the Add word option to add new
words into the T9 dictionary. See page 44.
Note: If you want to exit the menu without
changing the mode, press the
or key
soft key,
.
3. Press the Select soft key to confirm the
highlighted text input mode.
42
Entering text
Quickly changing the text input mode
To switch between the
Number and previous mode
Symbol and previous mode
ABC and T9 mode
Press and hold the
key.
key.
right soft key.
Using T9 mode
To type a word in T9 mode:
1. Start entering the word by pressing keys
Press each key only once for each letter.
2
to
9.
Example: To enter “hello” in T9 mode, press the
, and keys.
4,
3,
5,
5
6
The word you are typing appears on the display.
It may change with each key that you press.
2. Enter the whole word before editing or deleting
any keystrokes.
3. If the word is correct, start entering the next
word. Otherwise, press the
0
key repeatedly to
display alternative word choices for the keys
that you have pressed.
Example: Both “of” and “me” have the sequence
of
6
and
3. The phone displays the
most commonly used choice first.
4. Insert a space between words by pressing the
key.
5. Continue entering the next word.
43
Entering text
If Spell appears above the left soft key while you
are entering text, the word does not exist in the T9
dictionary. To type words not found in T9 mode,
change the text input mode to ABC mode, or
proceed as follows:
1. Press the Spell soft key, or press the right soft
key and select the Add word option.
2. Enter the word you want to add using ABC mode
(see page 45) and press the OK soft key.
The word is saved in the T9 dictionary and
inserted in the input field.
3. Continue entering other words in T9 mode.
Smart punctuation
To enter periods, hyphens, or apostrophes, press
the
1
key. T9 mode applies rules of grammar to
insert the correct punctuation.
Example: The key is used twice to display two
1
punctuation marks.
l
e
t
‘
s
e
a
t
.
Changing the case
To change the case of the next letter(s) that you
type, press the key. There are three cases:
• Lower case (no indicator)
• Initial capital (
• Capital lock (
)
)
44
Entering text
Inserting a space
To insert a space between words, press the
key.
Entering a number directly
To enter a number, press and hold the number key.
Scrolling
To move the cursor to the left, right, up, or down
within the text, press the navigation keys.
Clearing letters and words
To clear the letter to the left of the cursor, press the
C
key. You can clear all of the letters on the display
by pressing and holding the key.
C
Returning to the previous screen
When the text input field is cleared, press and hold
the
C
key to return to the previous screen.
Using ABC mode
When typing in ABC mode, press the key labelled
with the required letter:
- Once for the first letter
- Twice for the second letter
- And so on
Example: To display the letter “C”, quickly press the
2
key three times. To display the letter
“K”, press the key twice. This method is
called Multi-tap typing.
5
45
Entering text
Note: The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
press the Right key or wait a few seconds for
the cursor to move to the right automatically,
and then enter the next letter.
Refer to the table for more information about the
characters available. The characters vary,
depending on the text input language. You can
select the language by setting one of the following
options:
•
•
Language select; see page 42
Input mode; see page 162
List of the characters available
Key
1
characters in the order displayed
.
,
-
C
F
?
!
‘
@
:
1
2
A
D
G
J
B
E
H
K
2
3
3
4
I
4
5
L
5
6
M
P
N
O
R
V
Y
6
S
8
Z
7
Q
U
X
7
9
8
T
W
0
9
0
(Capital lock mode in English
)
46
Entering text
Changing the case
To change the case of the next letter(s) that you
type, press the key. There are three cases:
• Lower case (no indicator)
• Initial capital (
• Capital lock (
)
)
Inserting a space
To insert a space between words, press the
key.
Entering a number directly
To enter a number, press and hold the number key.
Scrolling
To move the cursor to the left, right, up, or down
within the text, press the navigation keys.
Clearing letters and words
To clear the letter to the left of the cursor, press the
C
key. You can clear all of the letters on the display
by pressing and holding the key.
C
Returning to the previous screen
When the text input field is empty, press and hold
the
C
key to return to the previous screen.
47
Entering text
Using symbolic mode
Symbolic mode enables you to enter symbols in
your text.
To
Press the
display more
symbols
Up or Down key.
enter a symbol
corresponding number key.
return to the
previous text input
mode with
OK soft key.
symbol(s) you have
entered
return to the
soft key.
previous text input
mode without
symbol(s) you have
entered
Using number mode
Number mode enables you to enter numbers in
your text. Press the keys corresponding to the digits
you want to enter.
48
Using the menus
The phone offers a range of functions that allows
you to tailor the phone to your needs. These
functions are arranged in menus and sub-menus.
Accessing a menu function
The menus and sub-menus can be accessed by
pressing the Menu or Phonebook soft key in idle
mode, then scrolling with the navigation keys.
1. In idle mode, press the Menu soft key to access
the main menu or press the Phonebook soft
key to access the Phonebook menu.
2. Scroll through the menus using the navigation
keys. And then press the Select soft key to
access the main menu.
3. Find the sub-menu that you wish to use by
scrolling with the Up or Down key.
4. Press the Select soft key to access the sub-
menu.
If the menu that you have selected contains
further sub-menus, repeat steps 3 and 4.
5. Scroll to the option you want to choose with the
Up or Down key.
6. Press the Select soft key to choose the setting.
Note: You can return to the previous menu level by
pressing the
soft key.
You can also access the menus and sub-menus by
quickly entering the corresponding menu number.
49
Using the menus
Example: Accessing the Voice mail menu.
1. Press the Menu soft key.
2. Press the
3. Press the
5
5
for Messages
.
for Voice mail
.
List of menu functions
Various menus let you check or change your phone
settings. The following list shows the menu
structure.
The numbers assigned to each menu option may
not match the menu number on the phone. It
depends on the services supported by your SIM
card.
Phonebook menu
1. Phonebook (see page 56)
1. Find name
2. Add entry
3. Speed-dial list
4. Copy all to phone
5. Send all via infrared
6. Delete all
2. Management (see page 66)
1. Own number
2. Group setting
3. Memory status
3. Services (see page 68)
1. Service directory
50
Using the menus
Main menu
*
1. SAT (SIM Application Toolkit) (see
page 69)
2. Call records (see page 70)
1. Missed calls
2. Received calls
3. Dialled calls
4. Delete all
5. Call time
1. Last call time
2. Total sent
3. Total received
4. Reset timers
6. Call costs*
1. Last call cost
2. Total cost
3. Max cost
4. Reset counters
5. Set max cost
6. Price/Unit
3. Network services (see page 74)
1. Call diverting
1. Divert always
2. Busy
3. No reply
4. Unreachable
5. Cancel all
2. Call barring
1. All outgoing
2. International
3. International except to home
4. All incoming
5. Incoming while abroad
6. Cancel all
7. Change barring password
*Shown only if it is supported by your SIM card.
51
Using the menus
3. Call waiting
4. Network selection
5. Caller ID
6. Band selection
*
7. Active line
4. Sound settings (see page 83)
1. Incoming calls
1. Default melodies
2. My sounds
3. Ring volume
4. Alert type
2. Messages
1. Short messages
2. Multimedia messages
3. Power on/off
4. Connection tone
5. Key tone
6. Minute minder
7. Quiet mode
8. Slide tone
9. Alerts on call
5. Messages (see page 88)
1. Short messages
1. Create
2. Inbox
3. Outbox
4. Delete all
2. Multimedia messages
1. Create
2. Inbox
3. Outbox
4. Draft
5. My folder
6. Delete all
*Shown only if it is supported by your SIM card
52
Using the menus
3. Push messages
1. Inbox
2. Setting
3. Delete all
4. Preset messages
5. Voice mail
1. Connect to voice mail
2. Voice server number
6. Broadcast
1. Read
2. Receive
3. Channel
4. Language
7. Settings
1. Short messages
2. Multimedia messages
8. Memory status
1. Short messages
2. Multimedia messages
6. Fun box (see page 115)
*
1. WWW services
1. Home
2. Bookmark
3. Go to URL
4. Clear cache
5. Proxy settings
6. Current proxy
2. Media box
1. Photos
2. Images
3. Sounds
4. Delete all
5. Memory status
3. JAVA world
1. Downloads
* May not be shown or supported by your network service
provider.
53
Using the menus
2. Internet settings
3. Memory status
4. Melody composer
1. Compose melody
2. Memory status
7. Organiser (see page 134)
1. New memo
2. Calendar
3. To do list
4. Clock
1. Set time
2. Set date
3. Set world time
4. Set format
5. Alarm
6. Voice recorder
1. Record
2. Voices
3. Delete all
4. Settings
5. Memory status
7. Calculator
8. Conversion
1. Currency
2. Length
3. Weight
4. Volume
5. Area
6. Temperature
9. Timer
10. Stopwatch
8. Camera (see page 151)
1. Take photos
2. My photos
3. My albums
4. Delete all
5. Settings
6. Memory status
54
Using the menus
9. Phone settings (see page 160)
1. Display
1. Wallpaper
2. Skin
3. Backlight
4. LCD brightness
2. Greeting message
3. Language
1. Text language
2. Input mode
4. Security
1. PIN check
2. Change PIN
3. Phone lock
4. Change password
5. Privacy
6. SIM lock
7. FDN mode
*
8. Change PIN2*
5. Auto redial
6. Voiceclarity
7. Slide settings
1. Up
2. Down
8. Anykey answer
9. Infrared activation
10. Reset settings
1. Sound settings
2. Phone settings
3. All settings
* Shown only if it is supported by your SIM card.
55
Phonebook menu
The Phonebook offers the following features:
•
•
•
Phonebook: allows you to find, create, or set up
the speed-dialling feature and manage
Phonebook entries.
Management: allows you to create or remove
your own number, set up caller groups and check
the memory status.
Services: allows you to use the service directory
depending on your SIM card.
Find name
To search for a number in your Phonebook, proceed
as follows.
1. Enter a letter(s) of the name that you want to
find.
The Phonebook entries are listed, highlighting
the entry matching your input.
2. If necessary, press the Up or Down key to scroll
to the entry you want.
3. Once you have found the entry, press the OK
soft key.
4.
To
Press the
key
dial the displayed
number
.
change the
Phonebook entries
Options soft key. For
further details, see
page 57.
56
Phonebook menu
Changing the phone memory entries
Scroll to the category that you want to edit by
pressing the Left or Right key. The following
categories are available and you can edit
information for each category by pressing the
Options soft key.
Category Then
Mobile
Home
Office
Fax
Select one of the following options. For
details for these options, refer to the
page 58.
Edit number
Change name
Other
Send message (shown if the category
contains a number)
Copy (shown if the category contains a
number)
Send via infrared (shown if the
category contains a number)
Delete entry
E-Mail
Note
Enter or edit e-mail address.
Enter or edit the memo.
Group
Graphic
Alert
Set one of the groups or no group.
Set one of the images or no image.
Set one of the melodies or not
assigned.
57
Phonebook menu
Changing the SIM memory entries
To change the SIM memory entry’s information,
press the Options soft key.
The following options are available:
Edit number
This option allows you to change the number. You
can also add a new number if none has been stored
for the selected category.
Change name
This option allows you to change the name of the
entry.
To clear the old name, press the
C
key. For more
information about how to enter characters, see
page 41.
Send message
This option allows you to send a message to the
number. For more information about how to send a
message, see page 90.
Copy
This option allows you to copy the entry from the
phone’s memory to the SIM card, or vice versa.
Send via infrared
This option allows you to copy the entry from your
phone to another device that has the IrDA port via
infrared.
Delete entry
This option allows you to delete the entry from your
Phonebook. To confirm the deletion, press the Yes
soft key. Otherwise, press the No soft key.
58
Phonebook menu
Add entry
You can store phone numbers and the
corresponding names in the memory of your SIM
card. In addition, you can store up to 1000 names
in the phone memory and each name can be
associated with up to five numbers.
1. Enter the number you want to save.
Notes
:
• If you make a mistake while entering a number,
correct it using the
page 27.
C
key. For further details, see
• To insert a dialling pause for special phone
services, such as banking by phone, hold down
the
key. “P” is displayed to indicate the pause.
2. When you are sure that the number is correct,
press the Save soft key.
3. Select the memory where the number is to be
stored, either Phone or SIM, and press the
Select soft key.
Note: If you change phones, any numbers stored
in your SIM card will automatically be
available with the new phone, whereas any
numbers stored in the phone’s memory
must be stored again.
4. If you select SIM in step 3, go to step 5.
If you select Phone in step 3, choose a number
type using the Up or Down key and press the
Select soft key.
5. Enter the associated name.
For more information about how to enter
characters, see page 41.
59
Phonebook menu
6. When you are satisfied, press the OK soft key.
7. If you select Phone in step 3, go to step 8.
If you select SIM in step 3, enter the location
number and press the OK soft key.
8. If you want to change the entry, use the options.
for more information on how to do this, see
page 57.
If you want to return to idle mode, press the
soft key, or the
key.
Storing a number in idle mode
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in Phonebook.
Continue the procedure from step 1 on page 59 to
store the number.
Speed-dial list
You can set up to eight speed-dial entries and then
dial them easily whenever you want, simply by
pressing the associated number key.
Setting up speed-dial entries
1. Press the Up or Down key to scroll to an empty
location and press the Select soft key.
2. When the Edit number option highlights, press
the Select soft key.
3. Enter a phone number and press the OK soft
key. Or,
60
Phonebook menu
To retrieve a number from your Phonebook,
press the Phonebook soft key. Select an entry
from the list and press the OK soft key. Press
the OK soft key to save it.
4. When you have finished, press the
or the key to exit.
soft key,
Editing the speed-dial entries
1. Select the speed-dial entry you want to edit
from the list and press the Select soft key.
2. Select one of the following menu options by
pressing the Up or Down key and press the
Select soft key:
•
•
•
Edit number: allows you to change the
number.
Change name: allows you to change the
name of the entry.
Delete: allows you to clear the setting so that
no number is assigned to the key.
3. When you have finished, press the
the key to exit.
soft key or
Using the speed-dial feature
When the idle screen is displayed, press the number
key,
press the
number key.
2
to
9
, assigned to the speed-dial entry and
key. You can also press and hold the
Note: The
1
key is reserved for your voice mail server
number.
61
Phonebook menu
Dialling a number stored in the SIM card
Once you have stored phone numbers in your SIM
card, you can dial them easily whenever required.
To dial a number stored in the SIM card:
1. Enter the number of the SIM card location where
the number you want to dial is stored.
2. Press the
key.
The display shows the name and number stored
in that location.
3. Press the Dial soft key or the
key.
Copy all to phone
You can copy all of the numbers stored in the SIM
card to the phone’s memory.
1. When a confirming message appears, press the
Yes soft key to copy.
The numbers in the SIM card are copied to the
phone’s memory, labelled with Mobile by
default.
Otherwise, press the No soft key.
2. When you have finished, press the
the key to exit.
soft key or
62
Phonebook menu
Send all via infrared
Via the infrared connection, you can send your
Phonebook entries to another IrDA- compliant
devices and vice versa.
Note: This feature may not be available depending on
the devices.
Sending your phonebook entries
1. Align the IrDA ports on both sides.
2. Access the Send all via infrared menu option
in the Phonebook menu and choose one of the
following options and press the Select soft key:
•
•
•
All: allows you to send all of the entries, from
the entry you choose to the end of the SIM
card and phone list.
SIM: allows you to send all of the entries,
from the entry you choose to the end of the
SIM card list.
Phone: allows you to send all of the entries,
from the entry you choose to the end of the
phone list.
3. When you select All and press the OK soft key,
your phone displays all of the Phonebook
entries.
When you select SIM or Phone and press the
OK soft key, all of the entries stored in the
corresponding memory location are listed.
4. Scroll to the entry you want to send first and
press the OK soft key.
Your phone will begin sending the entry(ies).
63
Phonebook menu
IrDA port
Receiving phonebook entries from another
device
1. Align the IrDA ports on both sides.
2. Access the Infrared activation menu (see
page 168) and select On to activate the port.
3. When your phone receives Phonebook data from
another device:
If the other person sends you one entry, your
phone displays the name and the phone number
and you can specify whether or not you want to
save it. Continue to step 4.
If the person sends you the entries by All SIM,
,
or Phone, you can select a memory location,
SIM card or phone’s memory. Continue to step
5.
4. Press the Save soft key to store the entry.
You can also discard the entry by pressing the
Cancel soft key.
5. Press the SIM or Phone soft key.
The entries will be saved in the appropriate
memory.
64
Phonebook menu
Delete all
You can delete Phonebook entries selectively
depending on the memory location, or all entries at
once.
1. Scroll to a desired memory selection and place a
check mark next to it by pressing the Select
soft key.
Selecting All places check marks on all of the
memories.
2. If necessary, repeat step 1 to check another
options.
3. When you have finished checking, press the OK
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the entries in the
memory(ies). Then enter the phone password
and press the OK soft key.
The password is preset to “00000000” by
default. To change it, see page 164.
Otherwise, press the No soft key.
65
Phonebook menu
Own number
To store your own phone number(s) with a name:
1. Scroll to an empty location by pressing the Up or
Down key and press the Select soft key.
2. When Edit number highlights, press the Select
soft key.
3. Enter your number and press the OK soft key.
4. To assign a name, press the Down key to move
to Change name and press the Select soft key.
5. Enter a name and press the OK soft key.
6. When you have finished, press the
the key to exit.
soft key or
To remove one of your numbers:
1. Select the entry you want to delete from the
Own number list and press the Select soft key.
2. Scroll to Delete by pressing the Up or Down key
and press the Select soft key.
3. When a confirming message appears, press the
Yes soft key to delete the number.
Otherwise, press the No soft key.
4. When you have finished, press the
the key to exit.
soft key or
66
Phonebook menu
Group setting
You can change the settings of the ten predefined
caller groups.
1. Select a caller group by pressing the Up or Down
key and press the Select soft key.
2. Scroll to a setting option by pressing the Up or
Down key and press the Select soft key.
The following options are available:
•
•
•
Melody: allows you to select a melody to
sound when a call comes in from a member in
the group.
Change name: allows you to change the
name of the group; for further details about
how to enter characters, see page 41.
View image: shows the image to be displayed
when a call comes in from a member in the
group.
3. Change the setting as required and press the
Select soft key.
4. Repeat steps 2 and 3 to change other options.
When you have finished, press the
the key to exit.
soft key or
67
Phonebook menu
Memory status
You can check how many names are stored in SIM
card and phone’s memory.
When you have finished checking, press the
key or the key to exit.
soft
Service directory
Note: This feature may not be available depending on
your SIM card.
The display shows the list of the numbers in the
Service directory.
If necessary, scroll to a number by pressing the Up
or Down key and press the
number.
key to dial the
68
Call records
Via this menu, you can view:
• calls you have missed, received, or dialled.
• the cost of your calls.
• the length of your calls.
Note: You can access the numbers in the three types
of call records by pressing the
mode.
key in idle
Missed calls
This option lets you view the last 20 unanswered
calls if the caller line identification is available.
The number, or name if available, displays together
with the date and time when the call was missed.
By pressing the Options soft key, you can also:
• delete the current call record from the list.
• delete all of the calls.
• paste the number into Phonebook.
Received calls
This option lets you view the last 20 received calls if
the caller line identification is available.
The number, or name if available, displays together
with the date and time when the call was received.
70
Call records
By pressing the Options soft key, you can also:
• delete the current call record from the list.
• delete all of the calls.
• paste the number into Phonebook.
Dialled calls
This option lets you view the last 20 dialled
numbers.
The number, or name if available, displays together
with the date and time when the call was made.
By pressing the Options soft key, you can also:
• delete the current call record from the list.
• delete all the calls.
• paste the number into Phonebook.
Delete all
You can delete all of the numbers stored in each call
record.
When a confirming message appears, press the Yes
soft key to confirm.
Otherwise, press the No soft key.
71
Call records
Call time
This option lets you view the timers for calls made
and received.
Notes:
• If your SIM card supports the ALS (Alternate Line
Service) feature, you must first select the
appropriate line.
• The actual time invoiced for calls by your service
provider may vary, depending on network features,
rounding-off for billing purposes and others.
The following timers are available:
Last call time: the length of the last call.
Total sent: the total length of all calls made since
the timer was last reset.
Total received: the total length of all calls received
since the timer was last reset.
Reset timers: the option used to reset the call
timers. You need to enter the phone password and
then press the OK soft key.
Call costs
This feature lets you view the cost of calls.
Notes
:
• This feature is not intended to be used for billing
purposes.
• AOC (Advice Of Charge) information may display in
idle mode, depending on your SIM card or service
provider.
72
Call records
The following options are available:
Last call cost: cost of the last call made.
Total cost: total cost of all calls made since the
cost counter was last reset. If the total cost exceeds
the maximum cost set via the Set max cost
option, you cannot make any calls until you reset
the counter.
Max cost: maximum cost set via the Set max cost
option.
Reset counters: option used to reset the cost
counter; you must first enter your PIN2 (see
page 175) and then press the OK soft key.
Set max cost: option used to enter the maximum
cost that you authorise for your calls; you must first
enter your PIN2 (see page 175) and then press the
OK soft key.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls; you must first enter your PIN2
(see page 175) and then press the OK soft key.
73
Network services
These menu functions are network services.
Please contact your service provider to check their
availability and subscribe to them, if you wish.
Call diverting
Note: The call divert options may be different
depending on your SIM card and those not
supported by your network operator may not
be shown.
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to divert your business calls
to a colleague while you are on holiday.
Call diverting can be set up in the following ways:
Divert always: all calls are diverted.
Busy: calls are diverted if your phone is engaged
on another call.
No reply: calls are diverted if you do not answer
the phone.
Unreachable: calls are diverted if you are not in an
area covered by your service provider.
Cancel all: all call diverting options are
deactivated.
You can specify individual call diverting options for
each of the following call types:
• Voice calls only
• Data calls only (not available when line 2 is in
use)
74
Network services
Example: You can divert voice calls to your
colleague if you are already using the
phone.
Setting call diverting options
1. Select the type of call diverting by pressing the
Up or Down key and then press the Select soft
key.
2. Select the type of calls to be diverted by
pressing the Up or Down key and then press the
Select soft key.
3. Press the Activate soft key to confirm your
settings.
4. Enter the number to which the calls are to be
diverted.
To enter an international code, hold down the
key until the + sign is displayed.
0
You can also select a number in your Phonebook
or the voice mail server number, by pressing the
Options soft key, followed by Phonebook or
Voice server
.
5. When you are satisfied, press the OK soft key.
The phone will send your settings to the network
and display the network’s acknowledgement.
75
Network services
Deactivating specific call diverting
options
1. Select the call diverting option to be
deactivated.
2. Select the type of calls to which this option
applies.
3. Press the Remove soft key.
The phone will send your settings to the network
and display the network’s acknowledgement.
You can also deactivate all call diverting options by
selecting the Cancel all option.
Call barring
The call barring network service allows you to
restrict your calls.
Call barring can be set up in the following ways:
All outgoing: calls cannot be made.
International: international calls cannot be made.
International except to home: when abroad,
calls can be made only to numbers within the
current country and to your home country, that is
the country where your home network provider is
located.
All incoming: calls cannot be received.
Incoming while abroad: calls cannot be received
when you are using your phone outside your home
service area.
76
Network services
Cancel all: all call barring options are deactivated;
calls can be made and received normally.
Change barring password: allows you to change
the barring password.
You can specify individual call barring options for
each of the following call types:
• Voice calls only
• Data calls only (not available when line 2 is in
use)
Setting call barring options
1. Select the type of call barring by pressing the Up
or Down key and then press the Select soft key.
2. Select the type of calls to be barred by pressing
the Up or Down key and then press the Select
soft key.
3. Press the Activate soft key to confirm your
settings.
4. Enter your call barring password supplied by
your service provider and press the OK soft key.
The phone will send your settings to the network
and display the network’s acknowledgement.
77
Network services
Deactivating specific call barring options
1. Select the call barring option to be deactivated.
2. Select the type of calls to which this option
applies.
3. Press the Deactivate soft key.
4. Enter your call barring password supplied by
your service provider.
The phone will send your settings to the network
and display the network’s acknowledgement.
You can also deactivate all call barring options by
selecting the Cancel all option.
Changing the barring password
You can set and change the call barring password
obtained from your service provider.
1. Select Change barring password from the
Call barring screen, and press the Select soft
key.
2. Enter the current password and press the OK
soft key.
3. Enter a new password and press the OK soft
key.
4. Enter the new password again to confirm it and
press the OK soft key.
78
Network services
Call waiting
This network service informs you when someone is
trying to reach you during another call.
You can specify individual call waiting options for
each of the following call types:
• Voice calls only
• Data calls only (not available when line 2 is in
use)
Activating the call waiting feature
1. Select the type of calls to which the call waiting
option is to be applied by pressing the Up or
Down key and then press the Select soft key.
2. Press the Activate soft key to confirm your
settings.
The phone will send your settings to the network
and display the network’s acknowledgement.
Deactivating specific call waiting options
1. Select the type of call to which the option
applies.
2. Press the Deactivate soft key.
The phone will send your settings to the network
and display the network’s acknowledgement.
You can also deactivate all call waiting options by
selecting the Cancel all option.
79
Network services
Network selection
The Network selection feature enables you to
automatically or manually select the network used
when roaming outside your home area.
Note: You can select a network other than your home
network only if it has a valid roaming
agreement with your home network.
You may automatically or manually select a network
when roaming. To do so:
1. Press the Up or Down key until the appropriate
option highlights and press the Select soft key.
If you select Automatic, you are connected to
the first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to step 2.
2. Press the Up or Down key until the preferred
network highlights and press the Select soft
key.
You will now be connected to that network when
roaming.
80
Network services
Caller ID
You can prevent your phone number from being
displayed on the phone of the person being called.
Note: Some networks do not allow the user to change
this setting.
The following options are available:
Default: the default setting provided by the
network is used.
Hide number: your number does not display on
the other person’s phone.
Send number: your number is sent each time you
make a call.
Band selection
For the phone to make and receive phone calls, it
must register with one of the available networks.
Your phone can handle any of the following types of
network:
• GSM 900
• GSM 1800
• Combined GSM 900/1800
• GSM 1900
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you must remember to change to an
appropriate band.
81
Network services
1. When Band selection displays, press the
Select soft key.
2. Press the Up or Down key until the appropriate
option (GSM 900/1800, GSM 1900, or Triple
band) highlights and press the Select soft key.
When you select a new band, your phone displays a
confirmation message and then automatically
searches for all of the available networks. Your
phone registers with a preferred network within the
selected band.
Active line
Some SIM cards may be used with two subscriber
numbers. This functions is available only if your SIM
card supports it.
This menu option allows you to select the line to be
used to make calls. However, calls can be answered
on both lines, regardless of the selected line.
82
Sound settings
You can use the Sound settings feature to
customise various settings, such as the:
• ringtone, volume and type for incoming calls or
messages.
• sounds made when your call is connected or
when you press a key.
• quiet mode which your phone switches to when
you hold down the
key in the idle mode.
Incoming calls
This option allows you to set up the ringer for
incoming calls.
Notes:If your SIM card supports the ALS (Alternate
Line Service) feature, you must select the line
you wish to change first.
The following options are available:
Select a melody from the list to be played each time
you receive an incoming call.
Default melodies: allows you to select one of the
predefined melodies.
My sounds: allows you to select one of the sounds
received from other sources, such as the WAP sites,
the EasyStudio PC software, or multimedia
messages.
83
Sound settings
Ring volume: allows you to adjust the ring
volume. Use the Up and Down keys or the volume
keys on the left side of the phone. The more bars
you see, the louder the volume.
Alert type: lets you specify how you are informed
of any incoming calls.
Melody: the phone rings using the melody selected
via the Default melodies and My sounds option.
Vibration: the phone vibrates but does not ring.
Vibration then melody: the phone first vibrates and
then plays the melody selected via the Default
melodies and My sounds option.
Messages
This option allows you to set up the ringer for each
incoming short message and multimedia message.
Short messages /
Multimedia messages
The following options are available:
Tone: lets you choose from many different tones.
Select a tone from the list to be played each time
you receive a message.
Alert type: lets you specify how you are informed
of any incoming messages.
Silent: only the text notification appears; the phone
neither rings nor vibrates.
Tone: the phone rings using the tone selected via
the Tone option. See above.
84
Sound settings
Vibration: the phone vibrates but does not ring.
Vibration then tone: the phone first vibrates and
then plays the tone selected via the Tone option.
Repetition: allows you to specify how often the
phone informs you of a new message. You can
choose either Once or Periodic
.
Power on/off
This option allows you to select the melody that the
phone sounds when you switch it on or off.
You can choose either Classical or Future. To turn
the sound off, select Off
.
Connection tone
This menu option allows you to specify whether or
not the phone beeps when the phone connects to
the network.
The following options are available:
Off: the phone does not beep.
On: the phone beeps when your call is accepted.
85
Sound settings
Key tone
This menu option allows you to select the tone that
the keypad sounds when you press a key.
To turn the sound off, select Off
.
To adjust the key tone volume, press the volume
keys on the left side of the phone in idle mode.
Minute minder
This menu option allows you to specify whether or
not the phone beeps every minute during a call to
keep you informed of the length of your call.
The following options are available:
Off: the phone does not beep.
On: the phone beeps every minute.
Quiet mode
When you hold the
key down in idle mode, the
phone switches to the quiet mode. You can specify
whether the phone vibrates or mutes when in the
quiet mode.
The following options are available:
Vibration: the phone vibrates rather than rings in
the quiet mode.
Mute: the phone mutes sounds in the quiet mode.
86
Sound settings
Slide tone
This menu allows you to select the slide tone that
the phone emits when you slide the folder up or
down.
To turn the sound off, select Off
.
Alerts on call
This menu allows you to set the phone to all alerts
while calling.
To turn the alerts off, select Off
.
87
Messages
This menu allows you to create, send, read and
save messages with the Short Message Service
(SMS: text message), Enhanced Message Service
(EMS: message including simple image, animation
or melody) and Multimedia Message Service
(MMS: message supporting the presentation of
various media types, such as full colour images and
polyphonic ring tones). Voice mails are also
available.
Note: This feature is only available if your service
provider’s network supports it. Contact your
service provider for more information.
Short messages
Short message service (SMS) allows you to send
and receive short text messages to and from other
GSM mobile phones. In addition, your phone
supports the Enhanced Messaging Service (EMS),
which enables you to make short messages
consisting of simple pictures, melodies, animations
and styled text all of which adds a new dimension to
simple text messages.
To send text messages by phone, you must obtain
the number of the SMS centre from your service
provider.
Receiving a new message
When you receive a new message, the New
message icon (
) and a text notification showing
the number of the message appear on the display.
You also hear an alert, depending on the message
sound setting; for further details, see page 84.
88
Messages
To read the new message(s) immediately, press the
View soft key. A list of the messages will appear.
Note: To clear the new message notification on the
display, press the
missed calls, voice mails, short messages or
multimedia messages, and multi CBs, the right
soft key indication changes in the following
order: Missed
,
Connect, View, CB and
Phonebook
.
Managing memory
Inbox and Outbox share a given amount of memory
in your phone or SIM card. When the message
memory is full, the New message icon (
and an error message displays. (It disappears when
you press the key, but it reappears if you don’t
) blinks
delete old messages.) In this case, you cannot
receive any new messages. You must delete one or
more old messages to free up memory for new
messages. Use the Delete option within the Inbox or
Outbox or the Delete all option; for further details,
see page 94.
Create
Using this menu, you can write messages, containing
text, images and melodies.
1. Create a message.
On the first line of the display, you see the
number of remaining characters you can enter,
the number of current message and the
maximum messages you can create, and the font
style you set in Text option.
Note: For further information about how to enter
characters, see page 41.
89
Messages
2. While entering your message, press the
Options soft key to use the following options.
•
Send: allows you to send the message. Refer
to the next step.
•
Text: allows you to format the text. Following
text attributes can all be combined as
required.
Text size: Small/Medium/Large
Text mode: Normal/Underscore/Strikethrough
Bold: Off/On
Italic: Off/On
Alignment: Left/Center/Right
•
Add media: allows you to add pictures,
animations and/or melodies to the message.
Select a category; Add picture Add
,
animation, or Add melody. You can then
choose a factory-set object or an object that
you have received from another source and
stored in the Media box. See page 121.
•
•
Preset messages: allows you to add a preset
message to your text. Select one of nine
messages stored in the Preset messages
menu option. See page 107.
Save message: allows you to save the
message so that it can be sent later. You can
read the message in the Outbox.
3. When you have finished entering your message,
choose Send from the options.
4. Enter a destination number on the Address
screen.
You can search for a number in Phonebook by
pressing the Phonebook soft key.
90
Messages
Note: To clear all of your input, press or press and
hold the key. When you have not entered any
text, pressing and holding the key will return
C
C
the display to the previous screen.
To send the message to multiple destinations up
to 5, press the Add soft key and repeat step 4.
5. When you have finished entering the numbers,
press the OK soft key.
6. If the Enter centre screen displays, enter the
service number and press the OK soft key.
You can store the SMS service centre number. For
details, see page 110.
Note: When the phone fails to send the message;
Press the Retry soft key to try the
transmission again. Or, press the No soft key
and the Save soft key to save the message or
exit the menu by pressing the No soft key.
Inbox
Your phone receives incoming messages and saves
them in the Inbox. SMS is usually saved in the SIM
card, but if the SIM memory is full, the incoming
messages will be saved in the phone’s memory.
When the Inbox menu is selected, the list of
messages received displays with the:
• sender’s phone number, or name if stored in
Phonebook.
• message status;
message to read, or
message.
for a read message,
for an incomplete
for a
91
Messages
To view a message, scroll to it and press the Select
soft key. The screen shows the:
• date and time when the message was received.
• memory where the message was stored;
for
the SIM card, or
for the phone’s memory.
• message contents.
You can scroll to the next or previous message by
pressing the Left or Right key.
To scroll through the message contents, press the
Up or Down key. When you focus on an object that
includes a melody, the melody is played.
You can choose the following options by pressing
the Options soft key:
Delete: allows you to delete the message.
Message reply: allows you to reply by sending a
message.
Call back: allows you to call the sender back.
Cut address: extracts phone numbers, email
addresses, or URL addresses in the text, so that you
can call the number or send a message to the
number, or save it in your Phonebook.
Send: allows you to send the message to another
person.
Edit: allows you to edit the message.
Extract media: you can save media (except the
predefined EMS animations and sounds) from the
message into Media box. You can use these items
when writing a message; for further details, see
page 90.
92
Messages
Transfer: allows you to transfer the message from
the SIM card to the phone’s memory or vice versa.
Outbox
Outbox stores any messages that you have already
sent or just saved without sending.
When the Outbox menu option is selected, the list
of messages you have sent or saved displays with
the:
• recipient’s phone number, or name if stored in
Phonebook.
• message status;
a message to send.
for a sent message or
for
To view a message, scroll to it and press the Select
soft key. The screen shows the:
• message status;
a message to send.
for a sent message or
for
for
• memory where the message was stored;
the SIM card or
for the phone’s memory.
• message contents.
You can scroll to the next or previous message by
pressing the Left or Right key.
To scroll through the message, press the Up or
Down key.
You can choose the following options by pressing
the Options soft key:
Delete: allows you to delete the message.
Cut address: extracts phone numbers, email
addresses, or URL addresses in the text, so that you
can call the number or send a message to the
number, or save it in your Phonebook.
93
Messages
Send: allows you to send the message to another
person.
Edit: allows you to edit the message.
Transfer: allows you to transfer the message from
the SIM card to the phone’s memory or vice versa.
Delete all
You can delete all messages stored in the SIM card
and phone’s memory in this menu.
1. Scroll to a message box and place a check mark
next to it by pressing the Select soft key.
Selecting All places check marks on all of the
message boxes.
2. If necessary, repeat step 1 to check another
box.
3. When you have finished checking, press the OK
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the messages in the
box(es).
Otherwise, press the No soft key.
94
Messages
Multimedia messages
Multimedia message service (MMS) is a messaging
service very similar to Short message service
(SMS). It provides asynchronous delivery of
personal multimedia messages from between phone
and phone, phone and e-mail, phone and web(by
URL).
In addition to the familiar text content of text
messages, multimedia messages can contain
images, graphics, voice and sounds. An MMS
message is a multimedia presentation in a single
entry. It is not a text file with attachments.
Using the MMS feature, your phone can receive
multimedia messages. You can also send picture
messages. This function is available only if it is
supported by your service provider. Only phones
that offer picture message features can receive and
display picture messages.
Retrieving a new message
When you are retrieving a message, the Retrieving
icon (
retrieving a new message, the New message icon
) and a text notification showing the number of
) appears on the display. When you finish
(
the message appear on the display. You also hear
an alert, depending on the message sound setting;
for further details, see page 84.
To read the new message in idle mode, press the
View soft key. And then you see the list in the
Inbox. If you select a message, you can read it.
95
Messages
Notes
:
• while retrieving a new message, you cannot access
WAP sites, and cannot also enter the Downloads
menu (see page 125).
• To clear the new message notification on the display,
press the
key. When you also have missed
calls, voice mails, short messages, or multimedia
messages, and multi CBs, the right soft key
indication changes in the following order: Missed
,
Connect
,
View, CB and Phonebook.
If Message reception was set to Manual (for
details, see page 112), when the New message icon
) appears on the display, you have to retrieve
messages in the Inbox. You select a message with
the icon such as and in the Inbox. Then
(
,
you can select retrieve or delete message by
pressing the Opt. soft key.
Managing memory
When the memory is full, the New message icon
(
) blinks and an error message displays. (It
disappears when you press the key, but it
reappears if you don’t delete old messages.) In this
case, you cannot receive any new messages. You
must delete one or more messages to free up
memory for new messages. Use the Delete option
within the Inbox, Outbox, Draft, or My folder, or the
Delete all option; for further details, see page 106.
96
Messages
Notes
:
• You can only receive up to 150 messages.
• Multimedia message boxes, Camera, and Media box
share a given amount of memory in your phone. You
can also use the Delete or Delete all option to
delete some sounds or images in the Camera or
Media box.
Create
This menu option allows you to create a new
multimedia message and then send it to multiple
destinations.
1. Select one of the following items using the Up or
Down key and press the Add soft key.
Item
How to add
Subject 1. Enter a subject for your message.
For details about entering
characters, see page 41.
2. Press the OK soft key.
Note: To return to previous screen while
entering a subject, press and hold
the
C
key.
Picture
To add a new picture;
1. Select the Create new option.
2. Take a photo using the camera
feature. For details about the
camera feature, see page 151.
97
Messages
Item
How to add
Picture
(continued)
3. Select one of the pictures you want
to add. The picture is displayed.
4. Press the Add soft key.
To add a picture in the Media box;
1. Select one of the picture categories.
The picture list of the category is
displayed.
2. Select one of pictures you want to
add. The picture is displayed.
3. Press the Add soft key.
Sound
To add a new sound;
1. Select the Record new option.
2. Press the Record soft key to start
recording.
3. Press the Stop soft key to stop
recording.
4. Press the Play soft key to replay the
sound. Or, press the Add soft key to
add it. Enter the sound’s name and
press the OK soft key. The sound is
added to the message and saved in
Media box automatically.
98
Messages
Item
How to add
Sound
(continued)
To add a sound in the Media box;
1. Select one of the sound categories.
The sound list of the category is
displayed.
2. Select one of the sounds you want
to add.
3. Press the Select soft key to add it.
Message
1. Enter a new message. Or you can
enter a preset message.
To enter a preset message;
• Press the Opt. soft key and select
the Preset messages
.
• Select one of the preset
messages.
2. Press the Opt. soft key and select
the Done option to add the
message.
Note: To return to previous screen while
entering a subject, press and hold
the
C
key.
2. Press the Opt. soft key to use the following
options.
•
Preview: shows your message as it will
display on the recipient’s phone. To go back to
the message screen, press the Edit soft key.
To send the message, press the Send soft key
and go to step 4.
•
Send: allows you to send the message to
another person. Refer to the next steps.
99
Messages
•
•
Add page: allows you to add up to 10 pages.
You can move to each page using the Left or
Right key on the message screen.
Page timing: allows you to set how long one
page of the received messages displays. After
the specified time, the display automatically
scrolls to the next page.
•
•
Text effect: allows you to set the colour, size
and style of the message text.
Clear subject/picture/sound/message:
allows you to delete the subject, image,
sound, or message by selected work.
•
•
Delete page: allows you to delete the current
page.
Save message: saves the message in Draft
(see page 104) or My folder (see page 105).
Note: To go back to the edit screen, press the
soft key or the key.
C
3. When you have finished creating the message,
select Send from the options.
4. Select an entry on the Send screen.
If it is an empty entry, enter a destination as
below.
Number: to enter a destination number.
Email: to enter an e-mail address.
Phonebook: to enter a destination from
Phonebook.
After entering a destination, press the OK soft
key.
100
Messages
If it is not an empty entry, do the following
things.
Edit address: to edit the selected address.
Delete address: to delete the selected address.
Note: To clear all of your input, press, or press and
hold the
text, pressing and holding the
C
key. When you have not entered any
key will return
C
the display to the previous screen.
5. To send the message to up to 20 destinations,
repeat step 4.
6. When you have finished entering the
destinations, press the Send soft key.
If you want to cancel sending your message or
resend the message that you have failed to send,
go to the Outbox. Then select the message and
the option you want. For further details, see page
103.
Inbox
Your phone receives incoming messages and saves
them in the Inbox.
When the Inbox menu is selected, the list of
messages you have received displays with the:
• message’s subject or No subject if the message
has no subject.
• sender’s phone number, or name if stored in
Phonebook.
• message status;
for a read message,
read, for a read notification message and
for a notification message to read.
for a retrieving message,
for a message to
101
Messages
Note: The message status icon can have many
forms, such as reflecting the
,
,
priority that the sender assigned (see
page 111).
To view a message without retrieving, scroll to it
and press the Select soft key.
To scroll through the message contents, press the
Up or Down key. When the message has more than
one page, you can press the Left or Right key to
move through the pages or a predefined page timer
will move through the message automatically.
Notes
:
• It may be impossible to display or play some pictures
or sounds.
• When the message has an attachment like video
clips, the Attachment icon (
) appears on the title
line. You may not play the attachment. And you may
also not extract it from the message.
You can choose the following options by pressing
the Opt. soft key:
Delete: deletes the message
Replay: replays the message.
Reply: replies to the sender by sending a message.
Forward: forwards the message to another person.
Call back: allows you to call the sender back.
Cut media: extracts the picture or sound, so that
you can set them as a wallpaper, ringtone, or you
can send them as a multimedia message.
102
Messages
Cut address: extracts phone numbers, email
addresses, or URL addresses from the text, so that
you can call the number or send a message to the
number, or save it in your Phonebook.
Properties: shows you the detailed information
about the message.
Move to My folder: moves the message to the My
folder for later use.
Outbox
Outbox stores messages that you have sent, you
failed to send and you cancelled sending.
When the Outbox menu option is selected, the list
of messages you have sent or saved displays with
the:
• message’s subject or No subject if the message
has no subject.
• recipient’s phone number, or name if stored in
Phonebook.
• message status;
for a sent message,
for a sending message,
for a message that you
failed to send or you cancelled sending,
for a
delivery report. When a receiver retrieves the
message you have sent and the Delivery report
option (see page 112) is set to on,
changed into
is
.
To view a message except sending, scroll to it and
press the Select soft key.
To cancel sending message, scroll through and
select the message by pressing the Up or Down key,
and then press the Select soft key. Then the
confirming message appears. In the message, you
can cancel sending it by pressing the Yes soft key.
103
Messages
To resend the message that you have failed to send,
scroll through and select the message by pressing
the Up or Down key, and then press the Select soft
key. Then press the Opt. soft key, and then select
the Send option.
To scroll through the message, press the Up or
Down key. When the message has more than one
page, you can press the Left or Right key to move
through the pages or the pages are moved through
as paging timing that sender fixed automatically.
You can choose the following options by pressing
the Opt. soft key:
Delete: deletes the message.
Replay: replays the message.
Send: sends the message.
Properties: shows you the detailed information
about the message.
Move to My folder: moves the message to the My
folder for later use.
Draft
This message box stores messages that you save,
messages interrupted by an incoming call, or
messages while you create a new message.
Note: You can save the messages that are failed to
send in the Outbox.
To view a message, scroll to it and press the Select
soft key.
104
Messages
You can choose the following options by pressing
the Opt. soft key:
Send: sends the message.
Replay: replays the message.
Delete: deletes the message.
Properties: shows you the detailed information
about the message.
My folder
You can move the messages stored in the Inbox or
Outbox to the My folder by using the Move to My
folder option. While making a new message, you
can also save it to My folder by using the Save
message option.
To view a message, scroll to it and press the Select
soft key.
You can choose the following options by pressing
the Opt. soft key:
Delete: deletes the message.
Replay: replays the message.
Send: sends the message.
Cut media: extracts the picture or sound, so that
you can set them as a wallpaper, or ringtone or you
can send them as a multimedia message.
Cut address: extracts phone numbers, email
addresses, or URL addresses from the text, so that
you can call the number or send a message to the
number, or save it in your Phonebook.
Properties: shows you the detailed information
about the message.
105
Messages
Delete all
This menu option allows you to delete all of the
messages in each message box. You can also delete
all of your messages at one time.
1. Scroll to a message box and place a check mark
next to it by pressing the Select soft key.
Selecting All places check marks on all of the
message boxes.
2. If necessary, repeat step 1 to check another
box.
3. When you have finished checking, press the OK
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the messages in the
box(es).
Otherwise, press the No soft key.
Push messages
This menu allows you to set to receive and read
push messages.
The following options are available:
Inbox: Your phone receives push messages and
saves them in the Inbox. And you can read push
messages in the Inbox.
Setting: This option allows you to set the push
message receiving options.
Always: always push message comes in.
106
Messages
Never: the push message never comes in.
Optional: Only the push message whose setting
matches to the number in this option comes in. The
preset number is SMS service centre. You can also
edit the number.
Delete all: deletes all of the push messages.
Preset messages
Using this menu, you can preset up to nine
messages that you use most frequently. When you
access this menu, the preset message list displays.
1. Scroll to a message or an empty entry by
pressing the Up or Down key.
2. Press the Select soft key and enter a new
message or change the old message.
For further details about entering characters,
see page 41.
3. Press the OK soft key to save the message.
Voice mail
When you receive a voice mail, your phone displays
the
icon and you hear an alert.
Connect to voice mail
• In idle mode, when you receive a new voice mail,
press the Connect soft key to access your voice
mail server and follow the instructions provided.
107
Messages
• In idle mode, hold the
1
key down to access your
voice mail server and follow the instructions
provided.
• Call your voice mail server number by accessing
the Connect to voice mail menu and follow the
instructions provided.
Voice server number
Before using the voice mail service, you must store
the voice mail server number obtained from your
service provider.
When you select an entry, the following options are
available.
Edit number: enter a voice mail server number or
press the Phonebook soft key to enter a number
from Phonebook. And then press the OK soft key.
Change name: enter a server name and press the
OK soft key to save it.
Delete: when the confirming message appears,
press the Yes soft key. To cancel, press the No soft
key.
Broadcast
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately as they
are received, provided that:
• the phone is in idle mode.
• the Receive option is set to On
.
108
Messages
• the message channel is currently active on the
channel list.
When you receive a broadcast message, you can
see the message in idle mode. If it is short you can
see the display, otherwise, press the CB soft key to
read the message.
The following options are available:
Read: lets you read the received broadcast
message.
Archive: shows the list of the messages you have
saved from the temporary list.
Temporary: shows the latest messages. These
messages will be gone when the phone is switched
off.
If the message is long, press the UP or Down key.
When you read a message, press the Options soft
key to access following options:
Cut number: shows the list of numbers included in
the message.
Save: (Temporary only) saves this message to
Archive list.
Delete: deletes this message.
Delete All: deletes all messages on the list.
Receive: allows you to turn the reception of
broadcast messages on or off.
Channel: the channel is enabled if you place a
check mark next to All
.
109
Messages
To enable or disable this channel, press the Select
soft key, then select Enable or Disable
.
The Add channel option allows you to add a new
channel to the channel list. Enter the appropriate
channel code obtained from your service provider
and a title for the channel.
Language: selects the language you prefer. Then,
You can receive cell broadcast messages only in the
language you selected.
Settings
Short messages
Using this menu, you can set up default SMS
information. The following options are available:
Service centre: allows you to store or change the
number of your SMS centre required when sending
messages. You must obtain this number from your
service provider.
Validity period: allows you to set the length of
time your messages are stored at the message
centre while attempts are made to deliver them.
Message type: allows you to set the message type
to Text Fax, Voice, ERMES, X400, or E-Mail.
,
The network can convert the messages into the
selected format.
Reply path: allows the recipient of your SMS
message to send you a reply via your message
centre, if the service is provided by the network.
110
Messages
Delivery report: allows you to set on or off. When
this function is set to on, the network informs you
whether or not your message has been delivered.
Character support: allows you to select the
character set when editing and sending messages.
GSM-alphabet: you can only send the message
using GSM characters.
Uni-code: you can send the message using Unicode
characters, including GSM alphabets. The maximum
number of characters which can be entered in a
message is reduced to half of that allowed in a GSM
message.
Automatic: if you select Automatic, the phone
selects the character set according to your use of
Unicode characters.
Multimedia messages
Using this menu, you can set up default settings for
sending or receiving MMS message. The following
options are available:
Send settings: The following options are available:
Priority: allows you to set the priority of message.
Validity period: allows you to set the length of time
your messages are stored at the message centre
while attempts are made to deliver them.
Delivery after: you can set the delay time before
the phone sends your messages.
Address hiding: when this option is set to On, your
phone number does not display on the recipient’s
phone.
111
Messages
Delivery report: when this option is set to On, the
network informs you whether or not your message
has been delivered.
Read reply: when this option is set to On, your
recipient’s phone sends a reply to let you know
when your message was read by her/him.
Receive settings: the following options are
available:
Msg. reception: allows you to set how you receive a
message. You can select one from Manual
Automatic, or Reject
,
.
Anonymous reject: when this option is set to On
,
your phone rejects messages without a caller ID.
Adverts reject: when this option is set to On, you
can reject advertisements by service provider.
Report allowed: when this option is set to Off, your
phone does not send a reply to the recipient’s
phone even if the sender asks for the read reply.
MMS profiles: in this menu, you can configure
MMS profile settings that are required when you
send or receive multimedia messages.
Current profile: allows you to select one profile to
use currently.
Profile setting: allows you to set up five profiles.
• Profile name: enter the name of the profile.
• Server URL: enter the address of profile server.
• GSM setting: allows you to change the proxy
settings for the GSM network.
- Gateway: enter the IP address and IP port.
112
Messages
- Data call type: select a network connection
type between ISDN and Analogue.
- Dial number: enter the server phone
number.
- Login ID: enter the server login ID.
- Password: enter the server password.
• GPRS setting: allows you to change the proxy
settings for the GPRS network.
- Gateway: enter the IP address and IP port.
- APN: enter the access point name used for
the address of the GPRS network gateway.
- Login ID: enter the user ID required to
connect to a GPRS network.
- Password: enter the password required to
connect to the GPRS network.
• Bearer: select the bearer to be used for each type
of network accesses.
- GPRS only: it only works in a GPRS network.
- GSM only: it only works in a GSM network.
113
Messages
Memory status
You can check the memory status for messages.
Short messages
You can check how many messages are stored in
the SIM card and the phone’s memory.
When you have finished checking, press the
key or the key to exit.
soft
Multimedia messages
Multimedia message boxes, Camera and Media box
share a given amount of memory in your phone.
The display shows the status of free and used
memory.
You can see the used memory status of multimedia
message boxes, Camera and Media box by pressing
the Left or Right key.
114
Fun box
The Fun box menu contains several fun options:
• WWW services
• Media box
• JAVA world
• Melody composer
WWW services
Your phone comes equipped with a WAP (Wireless
Application Protocol) browser, making it possible for
you to access the Wireless Web.
Each time you start the WAP browser, the phone
connects to the Wireless Web and the service
indicator icon (
or
) appears on the display to
inform you that you are connected to the Wireless
Web and will be billed accordingly. Rates vary
according to your service option.
The WAP browser ends the network connection
after a certain period of inactivity and automatically
reconnects as necessary. For this reason, you may
find that you are billed for several network
connections within a single session. This is normal
and is designed to minimise your bill.
Home
When you select this menu option, the phone
connects to the network and loads the homepage of
the Wireless Web service provider.
Once connected, the homepage displays. The
content depends on the service provider.
115
Fun box
Note: To quickly launch the WAP browser from idle
mode, press the
key.
To scroll through the screen, use the Up or Down
key.
To exit the browser, press the
key at any time.
The phone returns to idle mode.
Navigating the WAP browser
To
Press the
select browser
items
you want highlights, and then
press the soft key.
select a numbered corresponding numeric key.
item
return to the
previous page
(or Back) soft key or
key.
C
return to the
key and select the Home
startup homepage browser option. For details,
see page 117.
Entering text in the WAP browser
When you are prompted to enter text, the current
text input mode appears above the right soft key.
For further information on how to enter text, see
page 41.
116
Fun box
Using the WAP browser menus
There are various menu options available when
using the Wireless Web.
To access the WAP browser menu:
1. Press the
key or scroll to the logo on the top
soft
left of all WAP pages and then press the
key.
A list of options appears.
2. Highlight the required option using the Up or
Down key.
3. Press the
soft key to select the option.
4. If necessary, select the secondary option by
pressing the Up or Down key and then press the
soft key.
Note: The WAP browser menus may vary,
depending on your version of the browser.
The following WAP browser menus are available:
Back: returns to the previous page.
Home: takes you back at any time to the
homepage of the Wireless Web service provider.
Exit: exits the WAP browser.
Reload: reloads the current page.
Show URL: shows the URL address of the WAP
page you are currently accessing.
About...: shows browser information.
Using the WAP browser options
Several options are available when you are using
the Wireless Web. To access these options, press
the
key once connected to the Wireless Web.
117
Fun box
Goto URL: allows you to manually enter the URL
address of the site that you wish to access.
Bookmark: allows you to use the Bookmark
menu option. For details, see below.
Messages: allows you to read or write an SMS
message. For details, see page 88.
Media box: allows you to use your Media box. For
details, see page 121.
Answering a call during a WAP connection
You can receive an incoming call while you are
navigating the WAP browser.
Answer the call by pressing the
key or the
Accept soft key, as you normally would. After
ending the call, you can continue navigating on the
WAP page you were previously accessing.
Bookmark
This menu option allows you to store the URL
addresses of up to 15 of your favourite Web sites.
To store a URL address:
1. Select an empty location and press the Select
soft key.
2. Enter the address and press the OK soft key to
save it.
3. Enter the name of the bookmark and press the
OK soft key.
For further information about how to enter text,
see page 41.
118
Fun box
Once you have stored an address, the following
options are available when you select it.
Go: allows you to access the site directly.
Edit: allows you to change the name and URL
address of the bookmark.
Delete: allows you to delete the bookmark.
Go to URL
This menu option allows you to manually enter the
URL address of the Web site that you wish to
access.
Enter the URL address and press the OK soft key.
For further information about how to enter text, see
page 41.
Clear cache
This menu option allows you to clear the
information stored in the cache, the phone’s
temporary memory used to store the most recently
accessed WAP pages.
Proxy settings
This menu option allows you to set up five proxy
servers.
Note: You do not need to change the browser settings
in most cases. Change the settings only when
your network provider asks you to.
119
Fun box
For each proxy, the following options are available:
Proxy name: enter the name of the HTTP proxy
server.
GSM setting: you can change the proxy settings
for the GSM network.
Gateway: enter the IP Address and IP Port
Data call type: select a network connection type;
ISDN or Analogue
.
Dial number: enter the PPP server phone number.
Login ID: enter the PPP server login ID.
Password: enter the PPP server password.
GPRS setting: you can change the proxy settings
for the GPRS network.
Gateway: enter the IP Address and IP Port.
APN: enter the access point name used for the
address of the GPRS network gateway.
Login ID: enter the user ID required to connect to
the GPRS network.
Password: enter the password required to connect
to the GPRS network.
Home URL: you can change the address of your
startup homepage.
When the default homepage displays, you can
delete it using the
C
key and enter your own choice.
To enter any special characters, for example, use
the Symbolic mode; see page 48.
Bearer: you can select the bearer to be used for
each type of network accesses.
120
Fun box
GPRS first: your phone will search for the GPRS
network first. If this service is not available, you can
set the GSM service temporarily.
GPRS only: the phone only works in GPRS
networks.
GSM only: the phone only works in GSM networks.
Current proxy
This menu option allows you to activate one of the
proxies you set up to use the WAP connection.
Media box
This menu option stores various media items from
other sources, such as the WAP sites, the
EasyStudio PC software, or multimedia messages.
Photos
This option allows you to view previously taken
pictures.
My photos: allow you to view the photos in my
photos.
My album1 / My album 2: allow you to view the
photos in the selected album.
When you view a photo, press the Options soft key
to do the followings.
Send: allows you to send it via a message.
Rename: allows you to rename it.
Delete: allows you to delete it.
121
Fun box
Move to album: allows you to move it to one of
the albums.
Set as: allows you to set it as a wallpaper or a
caller ID.
Wallpaper: allows you to set it as a wallpaper.
Caller ID: allows you to set it as a caller ID.
Protection: allows you to protect it from deletion
or not.
Properties: allows you to view the detailed
information of the photo.
Images
This option allows you to view the images received
from other sources, such as the WAP sites, the
EasyStudio PC software, or multimedia messages.
When you view an image, press the Options soft
key to send, rename, delete, set as a wallpaper, or
view the properties.
For further details about these options, see the
options of the Photos menu (see page 121).
Sounds
This option allows you to listen to the recorded
voices and the melodies received from other
sources, such as the WAP sites, the EasyStudio PC
software, or multimedia messages.
Voices: allow you to listen to the recorded voices.
My sounds: allow you to listen to various melodies.
When you select a sound, press the Options soft
key to send, rename, delete, set as a ringtone (only
in My sounds) or view the properties.
122
Fun box
For further details about these options, see the
options of the Photos menu (see page 121).
Delete all
This option allows you to delete all of the photos,
images and sounds in the Media box.
Photos
1. Scroll to a box and place a check mark next to it
by pressing the Select soft key.
Selecting All places check marks on all of the
items. If you want to delete the protected
photos and the caller ID photos, select the With
protected photos option and the With caller
ID photos option.
2. If necessary, repeat step 1 to check another
box.
3. When you have finished checking, press the OK
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the photos in the
box(es).
Otherwise, press the No soft key.
Images
When a confirming message appears, press the Yes
soft key to delete all of the images.
Otherwise, press the No soft key.
123
Fun box
Sounds
1. Scroll to a sound box and place a check mark
next to it by pressing the Select soft key.
Selecting All places check marks on all of the
boxes.
2. If necessary, repeat step 1 to check another
box.
3. When you have finished checking, press the OK
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the sounds in the
box(es).
Otherwise, press the No soft key
Memory status
Media box, Camera and multimedia message boxes
share a given amount of memory in your phone.
The display shows the status of free and used
memory.
You can see the used memory status of Media box,
Camera and multimedia message boxes by pressing
the Left or Right key.
124
Fun box
JAVA world
You can download MIDlets (Java applications
running on mobile phones) from various sources
using the WAP browser and store them in your
phone.
Downloads
A list of Java games is displayed. In basic, two pre-
loaded MIDlets (Java games) are provided. If the
list of Java games is empty, a pop up message is
displayed to invite to download a new game. To add
MIDlets to the list, you can download MIDlets from
various web sites.
To
Press the
find a game
run a game
Up or Down key.
Launch soft key
Info soft key.
.
view the detailed
information
delete the game
Delete soft key in the
information display.
125
Fun box
SnowBallFight
The goal of this game is to challenge and defeat the
snowball fight champions of four different teams.
Accessing a game
After loading the game, press any key twice to go to
the first menu screen. At the first menu screen,
press the
key to play a game, or press the
key
to access the main menus of this game.
Play: allows you to start a new game or a saved
game. Saved game allows you to continue the last
stage you played.
Instructions: show you the explanation of control
keys, offense items and defense items.
Configuration: allows you to turn the sound on or
off, vibration on or off and select the game speed
from 1 to 5.
Quit: quits the game and returns to the downloads
menu screen.
Playing a game
Move the character along the street using the
navigation keys. If you have enough gold coins
which you can earn while fighting to buy items, you
can buy defense items at the drug store and offense
items at the item shop. Move the character to the
team of current stage and press the
key to select
it. When the snowball fight game starts, hit the rival
kids with snowballs and avoid them. While fighting
you can use items you have. If you raise enough
mana, you can also use a special attack. You should
win all fights in four stages in order to challenge the
champions of the snowball fight.
126
Fun box
Key Commands
4/6 or Left/Right: move left or right
2,5 or Up, :control the distance at the first press
and throw the snowball at the next press.
8 or Down: use the special attack depending on
your mana
3: enters item mode to use your item, select the
item you want to use by pressing 2, 5, Up, or
key.
Special attacks
Level 1: Aurora, all enemies are hit by a snowball.
Level 2: Ice dragon, all enemies are hit by a
snowball and frozen for 8 seconds.
Level 3: Icicle storm, double powered snowball
attack to all enemies and decreasing enemies’
attack accuracy for 10 seconds.
BubbleSmile
BubbleSmile is an arcade puzzle game.
Accessing a game
After loading the game, you will see the following
options, press the
key:
Start game: allows you to start a new game with
timed mode or skilled mode.
• Timed mode: you have to achieve the best score
before the time bar runs out. When you get the
same coloured bubble together, the time bar will
increase.
127
Fun box
• Skilled mode: you have to make more then 4
bubbles disappear at once for the skill bar to
increase. If less than 4 bubbles disappear, the
skill bar will decrease.
Continue: allows you to continue the last game
you played. The menu is only available when a
game has already been played.
High score: shows you the high score table.
How to play: shows you the instruction of this
game.
Option: allows you to turn the sound on or off
Playing a game
Your score goes up when you remove the bubbles.
The bubbles will disappear only when more than 3
of the same colour line up horizontally or diagonally.
To line up the bubbles, move the band surrounding
the 3 bubbles to suitable place and rotate it. When
the game is over, your score is ranked on the high
score board if it is within the top 3 scores.
Key Commands
2, 4, 6, 8, or navigation keys: move the band up,
down, left, or right
1: rotate the bubbles in the band counterclockwise
3: rotate the bubbles in the band clockwise
Internet settings
This menu option allows you to set the information
to connect to the Java server. This information is
provided by the network operator automatically, but
you can change it manually.
128
Fun box
APN: enter the access point name used for the
address of the GPRS network gateway.
Login ID: enter the user ID required to connect to
the GPRS network.
Password: enter the password required to connect
to the GPRS network.
DNS settings: enter the DNS address. The DNS
(Domain Name Server) address to connect to the
Java server is automatically set when making data
call set up.
Proxy settings: used in case you choose to use
proxy server.
• IP address: enter the HTTP proxy address
required to connect to the GPRS network.
• IP port: enter the port number required to
connect to the GPRS network.
Proxy: select whether or not you use a proxy server
when you access network service.
Note: Proxy settings and Proxy may not be shown by
your service provider.
Memory status
You can check the free space available for Java
downloads.
The display also shows the total memory and used
memory.
129
Fun box
Melody composer
Compose melody
Melody Composer allows you to compose your own
melodies using a variety of musical components.
You can set one of your melodies as your ringtone
or send them to other people by using the
multimedia message service.
When you access the Compose melody menu
option, a composition screen with a stave displays
with a selection point at the first note position (Do).
Creating a melody
You can compose a melody of up to 10 pages.
1. Move the selection point up or down by pressing
the Up or Down key.
2. When you place the selection point correctly,
press the Input soft key.
3. Scroll a note or rest and press the OK soft key
or press the corresponding number key to insert
it.
The note or rest is inserted onto the stave and
the selection point moves to the right on the
same line as the entered note or rest.
4. Repeat steps 1 to 3 to add more notes and rests.
Note: You can also add the background melody,
change the tempo, or adjust the volume by
using the composer options. See the
following page.
130
Fun box
5. When you have completed your melody, press
the Options soft key.
6. Select Save and press the Select soft key.
7. Enter a melody title and press the OK soft key.
The melody is saved and a new stave displays.
Using the composer options
While composing a melody, press the Options soft
key to access the following options:
New: opens a new composer screen.
Open: opens the list of your own melodies.
Play: plays back the current melody.
Save: saves the melody.
Save as: allows you to save the melody as a
different name.
Instrument: allows you to change the musical
instrument for the melody.
Background melody: allows you to use the
background melody. You can choose one of a
variety of music genres, such as Dance, Jazz, Latin,
Pop, or Reggae.
Add note: allows you to add notes in different
chord.
Tempo: allows you to change the tempo for the
melody.
Volume: allows you to adjust the volume level of
the main and background melodies separately.
131
Fun box
Editing a melody
While composing a melody or after opening a saved
melody, you can edit it.
1. To change an entered note or rest, move the
selection point by pressing the Left or Right key.
The colour of the selected one changes to red to
indicate that it is in Edit mode.
2. Change the position of the note or type of the
note or rest the same as you would when
inserting it.
Press the
or
key to move a note to the
next semitone higher position or lower position.
You can access the following options by pressing
the Options soft key in Edit mode.
•
Range: allows you to select more than one
note or rest by pressing the Left or Right key.
The selected ones are indicated in yellow.
•
•
•
Copy: copies the selected note(s) or rest(s).
Cut: cuts the selected note(s) or rest(s).
Paste: pastes the selected note(s) or rest(s)
to the end of the melody.
•
•
•
Change: allows you to change the type of the
currently selected note or rest.
Delete: deletes the selected note(s) or
rest(s).
Play: plays back the current melody.
132
Fun box
3. After editing, press the Right key until the
selection point moves to an input position.
4. Press the Options soft key and select Save to
save the changes to the melody, or Save as to
save the melody as a different name.
Memory status
This option allows you to check the memory status
for the melody composer. Multimedia message
boxes, Camera and Media box share a given
amount of memory in your phone.
The display shows the status of free and used
memory. You can see the used memory status of
multimedia message boxes, camera and media box
by pressing the Left or Right key.
133
Organiser
The Organiser feature enables you to:
• view the calendar and/or write a memo, or to do
list.
• set the current date and time, and find out what
time it is in various cities around the world.
• set the alarm so that the phone sounds at the
specific time.
• use your phone as a voice recorder, calculator,
unit convertor, timer, or stopwatch.
New memo
This menu option allows you to create a new memo.
Note: You can also access this menu by holding down
the
C
key in idle mode.
1. Write your memo of up to 100 characters and
press the OK soft key.
For further information about how to enter text,
see page 41.
2. Select the category of the memo to be saved
and press the Select soft key.
The following categories are available:
•
•
•
Scheduler: general schedule events, such as
appointments or meetings.
To do list: tasks you need to do. They are
saved on the to do list.
Call: calls you need to make.
134
Organiser
•
Anniversary: anniversaries to be
remembered, such as wedding anniversaries,
birthdays, or other special days.
Note: You can save up to 25 items to each
category, so you can save 100 memos
totally.
3. Scroll to a date on the calendar by pressing the
navigation keys. Press the Select soft key.
4. If applicable depending on the category you
selected, enter the event time and press the OK
soft key.
5. If you have selected the 12-hour time format
(see page 141), select AM or PM by pressing
the Up or Down key and then press the Select
soft key.
6. To set an alarm for the memo, press the Yes
soft key.
Otherwise, press the No soft key. The memo is
saved immediately. Go to step 10.
7. Enter the time for the alarm to sound and press
the OK soft key.
8. If you have selected the 12-hour time format
(see page 141), select AM or PM by pressing
the Up or Down key and then press the Select
soft key.
9. Select an alarm tone and press the Select soft
key.
The memo is saved and then displays on the
screen.
10. You can choose the following options by
pressing the Options soft key:
135
Organiser
•
Add: allows you to add a new memo on the
day.
•
•
•
Delete: allows you to delete the memo.
Edit: allows you to edit the memo.
Move: allows you to move the memo to a
different date.
•
Copy: allows you to copy the memo to a
different date.
11. When you have finished, press the
soft key
or the
key to exit.
Calendar
The calendar helps you to keep track of your
schedule, calls that you need to make, tasks that
you need to do and anniversaries. You can set the
alarm to sound when the date you have set for a
schedule is reached.
Consulting the calendar
To
Press the
move to another
day
Left or Right key.
move to another
week
Up or Down key.
move to the
previous or next
month
Up or Down key and hold it
down
move to the
previous or next
year
Left or Right key and hold it
down.
136
Organiser
The following options are available when you press
the Options soft key on the Calendar display:
Add memo: allows you to add a new memo on the
day.
Go to date: allows you to enter a particular date
and then schedule an event on that date.
View all: shows all of the events that you have
scheduled.
Delete day: deletes the scheduled event on the
selected day.
Delete all: deletes all of the events that you have
scheduled.
Creating a new memo
1. Scroll to a date on the calendar, referring to
page 136, and press the Select soft key.
2. Write your memo and press the OK soft key.
For further information about how to enter
characters, see page 41.
3. Select the category of the memo to be saved
and press the Select soft key.
The following categories are available:
•
Scheduler: general schedule events, such as
appointments or meetings.
•
•
•
To do list: tasks you need to do.
Call: calls you need to make.
Anniversary: anniversaries to be
remembered, such as wedding anniversaries,
birthdays, or other special days.
137
Organiser
4. Follow the procedure from step 4 on page 135
onwards to save the memo.
Viewing your calendar memos
A date that has a memo associated with it is
highlighted in a box. If you select a date when
events have already been scheduled, the number of
memos of each type is shown at the bottom of the
calendar.
•
•
•
•
: General schedule events
: To do list
: Calls
: Anniversaries
Press the Select soft key to view the memos.
If you have created more than one memo on the
same day, you can scroll to the event you want to
view by pressing the Left or Right key.
The following options are available when you press
the Options soft key:
Add: allows you to add a new memo. For further
information about how to add a memo, see
page 134.
Delete: allows you to delete the memo.
Edit: allows you to edit the memo.
Move: allows you to move the memo to a different
date.
Copy: allows you to copy the memo to a different
date.
138
Organiser
To do list
This menu allows you to view a list of tasks.
To create a new memo of the To do list type:
1. Write the memo about your task and press the
OK soft key.
For more information about how to enter
characters, see page 41.
2. Scroll to a date on the calendar, referring to
page 136, and press the Select soft key.
3. Follow step 4 on page 135 onwards to save the
memo.
Once you have defined tasks, they are listed with a
status mark (
for Done or
for Undo) within
the To do list menu.
To scroll to a specific task, press the Up or Down
key and press the Select soft key. The task displays
with the deadline, alarm setting, job details and
status mark.
You can scroll to the previous or next task by
pressing the Left or Right key.
The following options are available when you press
the Options soft key:
Add: allows you to add a new task. For details
about adding To do list-type memos, see page 134.
Mark: allows you to change the status mark.
Edit: allows you to edit the contents of the task.
Move: allows you to move the task to a different
date.
139
Organiser
Copy: allows you to copy the task to a different
date.
Delete: allows you to delete the task.
Delete all: allows you to delete all of tasks from
the list.
Clock
This option allows you to change the current time
and date displayed. You can also check the current
time for Greenwich Mean Time (GMT) and 22 major
cities around the world.
The following options are available:
Set time: allows you to enter the current time. You
can choose the time format in the Set format
menu option; see page 141.
Note: Before setting the time, you must specify your
time zone in the Set world time menu option.
Set date: allows you to enter the day, month and
year. You can change the date format in the Set
format menu option; see page 141.
Set world time: allows you to check the current
time in GMT and 22 major cities around the world.
Scroll through the cities using the Left or Right key.
The screen shows the:
• city name.
• current date and time.
• time difference between the selected city and
your city if you have set the local time (see
below) or GMT (by default).
140
Organiser
To select your time zone:
1. Select the city corresponding to your time zone
by pressing the Left or Right key one or more
times.
The local date and time display.
2. Press the Set soft key.
3. To
Select
update the current Set local
date/time with this
new setting
.
indicate that the
time zone is
Set DST. The
shown next to the time
icon is
currently using the difference.
daylight savings
time
indicate that the
time zone is no
longer using the
daylight savings
time
Remove DST (only
available when the
icon is shown next to the
time difference).
4. When you have finished, press the
the key to exit.
soft key or
Set format: allows you to change the time and
date formats.
Time format: 24 hours
12 hours
Date format: DD/MM/YYYY (day/month/year)
YYYY/MM/DD (year/month/day)
141
Organiser
Alarm
This option allows you to set an alarm to sound at
the specific time. You can set up three alarms or set
the phone to sound an alarm when it is switched off.
To set an alarm:
1. Select either Morning call
,
Alarm1, or Alarm2
by pressing the Up or Down key.
The
set. The
icon means that no alarm is currently
icon means that an alarm has
already been set.
2. Press the Select soft key.
3. Press the Options soft key.
4. Scroll to an option by pressing the Up or Down
key and press the Select soft key. Change the
setting, as needed.
•
Alarm day: place or remove a check mark on
the day(s) of the week by pressing the Select
soft key. If you want to set a daily alarm,
select Everyday. If you want to set a
temporary alarm, select One-time alarm
.
When you press the OK soft key after
selecting, your phone asks you to enter the
alarm time.
•
Alarm time: enter the time for the alarm to
sound.
•
•
Alarm tone: select an alarm melody.
Remove alarm: deactivates the alarm.
Note: The alert type of Alarm1 and 2 is affected by
the alert type of incomming call. The type of
alert for Moring call is always a melody.
5. Repeat step 4 to change each setting call.
142
Organiser
6. When you have finished, press the
the key to exit.
soft key or
Once an alarm has been set, you can see the Alarm
icon ( ) on the top line of the display. To stop the
alarm when it sounds, press any key.
Note: When the quiet mode is activated, the alarm
doesn’t sound. But When you set a morning call,
the alarm sounds even if the quiet mode is
activated.
To set the alarm to sound even if your phone is
switched off:
1. Scroll to Auto power on the Alarm list and
press the Select soft key.
2. If necessary, press the Up or Down key to select
On
.
To turn the Auto power feature off, select Off
.
3. Press the Select soft key to save the setting.
4. When you have finished, press the
the key to exit.
soft key or
Once you have activated the auto power alarm, a
check mark appears next to Auto power. If the
phone is switched off at the specified alarm time, it
automatically switches on and the alarm sounds. It
then automatically switches off again.
To turn off an alarm:
• Press the Confirm soft key.
• When the alarm for morning call sounds, press
any key or the Snooze soft key to stop the alarm
for five minutes, after which it will resume. You
can do this a maximum of five times.
143
Organiser
The snooze alarm sounds while the phone is
switched off and the Auto power is set to on, and
the quiet mode is activated. If you reset the moring
call’s alarm time or deactivate the alarm for
morning call, the snooze alarm is cancelled.
Voice recorder
This menu option allows you to record a voice
memo and send it to other people by using the
multimedia message service.
Record
This option allows you to record a new voice memo.
1. To start recording, select the
by pressing
the Select soft key.
2. Record a voice memo by speaking into the
microphone.
3. When you select the
time expires, the voice memo is saved in your
phone automatically. Select the to play the
recorded voice. You can also pause, rewind, or
forward by pressing the , or
, or if the recording
,
.
4. Otherwise, press the Options soft key to use
the following options.
•
Send: allows you to send the recorded voice
memo to other people by using the multimedia
message service.
•
Rename: allows you to change the name of the
recorded voice memo.
•
Delete: allows you to delete the recorded voice
memo.
144
Organiser
•
Properties: displays the information about the
recorded voice memo, such as name, memory
size, and file format.
5. When you have finished, press the
or the key to exit.
soft key,
Voices
This option shows you the list of voice memos you
have recorded. Scroll to the voice memo you want
and press the Select soft key. The voice memo will
play back automatically. While playing, you can stop
playing, pause, rewind or forward it by selecting the
,
,
, or
. The following options are
available when you press the Options soft key:
Send: allows you to send the recorded voice memo
to other people by using the multimedia message
service.
Rename allows you to change the name of the
:
recorded voice memo.
Delete: allows you to delete the recorded voice
memo.
Properties: displays the information about the
recorded voice memo, such as name, memory size,
and file format.
Delete all
This option allows you to delete all of the recorded
voice memos. When a confirming message appears,
press the Yes soft key to confirm. Otherwise, press
the No soft key.
145
Organiser
Settings
This option allows you to change the default
configuration of the voice recorder.
The following options are available:
Recording time: allows you to set the duration of
recording.
Normal: you can record your voice memo until you fill
out the phone’s memory capacity.
Limit size (for MMS): you can record your voice memo
for up to 2 minutes which enables you to attach the
recorded voice memo to multimedia messages.
Volume: allows you to adjust the voice memo
volume when it plays.
Default name: allows you to change the default
prefix name of the voice memo.
Memory status
This option allows you to check the memory status for
the voice recorder. Multimedia message boxes,
Camera and Media box share a given amount of
memory in your phone.
The display shows the status of free and used
memory. You can see the used memory status of
multimedia message boxes, camera and media box
by pressing the Left or Right key.
Calculator
You can use the phone as a calculator. The calculator
performs basic arithmetic functions, such as addition,
subtraction, multiplication, division and remainder
computation.
146
Organiser
To perform a calculation:
1. Enter the first number using the number keys.
Note: To erase any mistakes or clear the display,
press the
C
key.
2. Press the
key to enter a decimal point (.) or
the key to enter the appropriate arithmetic
symbol:
(divide),
+
%
(add),
(remainder),
-
(subtract),
or ).
(multiply),
/
(
3. Enter the second figure.
4. Repeat steps 2 and 3, if necessary.
5. Press the Equal soft key to view the result.
The result appears in the Answer box.
Note: The result is rounded to six decimal places.
6. When you have finished, press the
the key to exit.
soft key or
Conversion
This menu option allows you to convert from one
type of unit to another.
To convert a value:
1. Scroll to the type of conversion to be performed
from Currency Length, Weight, Volume,
,
Area and Temperature, and press the Select
soft key.
2. Enter the value to be converted and press the
Down key to move to the From field.
You can enter a decimal point (.) using the
key. And you can enter a minus (-) using the
key in Temperature
.
147
Organiser
3. Select the original unit by pressing the Left or
Right key and press the Down key to move to
the To field.
Refer to the table on the following page for the
units available.
4. Select the required unit by pressing the Left or
Right key.
5. Press the OK soft key or the
key to view the
result.
The result appears in the Answer box.
6. When you have finished, press the
the key to exit.
soft key or
Units available
Type
Units
Currency
EURO
FRF
DEM
ESP
BEF
GRD
ITL
NLG
FIM
IEP
ATS
PTE
LUF
Length
mm
km
cm
in
m
ft
yard mile
kg
Weight
Volume
g
ton
grain oz
pound
3
3
cm
m
l
3
3
3
in
ft
yd
gal
148
Organiser
Type
Units
2
2
Area
cm
m
a
2
2
2
in
ft
yd
acre
°C
Temperature
°F
Timer
Using the Timer feature, you can set the phone to
sound an alarm after a certain time.
1. Press the Set soft key.
2. Enter the length of time you want to count down
in hours and minutes and press the OK soft key.
3. Press the Start soft key to start counting down.
Even if you exit the Timer screen, the timer will
continue running. After the specified time has
expired, the phone informs you by playing a melody
and displaying a text notification.
To stop the timer melody when it sounds, press any
key.
To stop the timer before the end, press the Stop
soft key on the Timer screen.
Notes
:
• The timer uses power from the battery consequently,
the phone’s operating time is reduced.
• When the quiet mode is activated, there is no sound.
149
Organiser
Stopwatch
The stopwatch can be used to measure times for
various sports.
Example: Running or swimming races
Up to four stopwatches can be used.
The precision of the stopwatch is one hundredth of
a second. The maximum measurement time is 10
hours.
1. To start the stopwatches, press the OK soft key.
2. When you wish to stop the first stopwatch, press
the OK soft key. Repeat this step for the other
stopwatches.
3. Press the Reset soft key to reset the watches.
4. Press the
C
or
key to exit.
150
Camera
Using the camera module embedded in your phone,
you can take pictures for people or events while on
the move. Additionally, you can send photos to
other people in a picture message or as an e-mail
attachment. The camera produces JPEG pictures.
CAUTION
:
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are not
allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Note: Be careful not to cover the camera lens with
your hand when holding your phone. The
camera lens is found on the back of the phone.
Take photos
This menu allows you to take a picture, and to send
the photo as a picture message to other
destinations. You can use the picture as a
background and store it separately in My album
folder.
Taking a picture
1. To access the Take photos menu directly, press
the Up key in idle mode. And then press the
Select soft key when Take photos highlights.
To take pictures immediately in idle mode, press
and hold the Camera ( ) key on the right side of
the phone.
151
Camera
The image to be captured appears on the
display.
The icons on the top line of the display indicate
the size, quality, flash type and current mode
(shown if you select the multi-shot mode or
night mode).
2. Adjust the image by aiming the camera at the
subject.
To
Press the
adjust the brightness of Left or Right key.
the picture
zoom in or out within the Up or Down key.
picture
flip the picture up and
down
volume up key
reverse the picture like a volume down key
mirror image
turn the viewfinder’s
frame on or off
1
key
change the picture size
2
3
key
key
change the picture
quality
select the mode
select the effect
4
5
6
key
key
key
turn the anti-banding
noise on or off
select the frame
7
8
9
key
key
key
select the delay time
go to the My photos
menu
152
Camera
To
Press the
0 key
switch the camera flash
on or off (if you set the
Manual option in the
Flash light menu. See
page 156, 159)
For more information about these functions, see
“Using the camera options” on page 154.
3. Press the
soft key or the Camera ( ) key on
the right side of the phone to take a picture.
The picture is automatically saved in the My
photos (see page 157).
4.
To
Press the
use the options
Options soft key.
For details about the
options, see below.
delete the picture file
Delete soft key.
return to capture mode
to take another picture.
C
key.
turn the camera off
key.
and return to idle mode
When you press the Options soft key after taking a
picture, the following options are available. Scroll to
the option you want by pressing the Up or Down
key and press the Select soft key:
Send: allows you to send a multimedia message
using the taken picture. For further details about
sending multimedia messages, see page 95.
Rename: allows you to rename the taken picture.
153
Camera
Go to my photos: allows you to see the taken
pictures in the My photos (see page 157).
Set as: allows you to set it as a wallpaper or a
caller ID.
Wallpaper: allows you to set it as a wallpaper.
Caller ID: allows you to set it as a caller ID.
Protection: allows you to protect the taken picture
from deletion or not.
Properties: this option shows you the information
about the picture, such as name, size, date,
resolution, protection type and format.
Using the camera options
When you press the
soft key in the capture
mode, the following options are available for the
current shot:
Mode: You can take a picture in various modes.
Once you change the mode, its indicator appears at
the top right on the display.
Normal shot: you can take a picture in the normal
mode.
Multi-shot: you can take action stills. Select speed
and the number of pictures you want to take. When
you press the
soft key or the Camera ( ) key
on the right side of the phone, the phone
automatically takes and saves the pictures
successively as many times as you set. The Mobile
(128*120) size will be set by default.
154
Camera
Night mode: this option allows you to take a picture
of the best quality when it is dark.
Capture only: you can take pictures without review.
Frame: this option allows you to use a frame on
the picture. Press the navigation keys to find the
frame format you want to use. You can preview the
image with the frame format by using the Preview
soft key. The Mobile (128*120) size will be set by
default.
Note: The zoom control bar and the brigthness control
bar do not display when you use the frame.
Effects: this option allows you to apply special
effects to the picture. Press the Up or Down key to
find the tone you want to use. Gray
Sepia Emboss and Sketch are available. To
deactivate the effect setting, select Off
,
Negative,
,
.
Rotation: this option allows you to flip the image
vertically or reverse it as a mirror image.
Timer: you can select the delay time. When you
press the capture key, the phone takes the picture
after the specified time. When you exit the camera
mode or select Off in the Timer menu, the timer is
off.
Settings: this option allows you to change the
settings for taking a picture. And this option is
synchronized with the Settings menu. See
page 158.
155
Camera
Photo size: sets the image size to one from
VGA(640*480) QVGA(320*240),
,
QQVGA(160*120) and Mobile(128*120). The
selected image size displays on the capture screen.
Photo quality: allows you to select the image quality
from Super fine Fine, Normal, and Economy.
,
The option you select appears on the top of the
display.
Shutter sound: allows you to select a sound when
you press the shutter, the soft key or the
Camera ( ) key on the right side of the phone.
Note: This sound setting is not applied to the multi-
shot sound.
Flash light: allows you to set the camera flash to
automatic or manual use.
• Manual: to switch the camera flash on or off, you
have to press the
0
key in the capture mode.
• Automatic: when you press the shutter, the
soft key or the Camera ( ) key on the right side
of the phone, the phone lights a flashlight. After a
while the camera will take a picture and the
flashlight will go out.
Default name: allows you to change the default
prefix name of the picture.
Help: this option shows you the functions of the
navigation keys and the volume keys in the capture
mode.
156
Camera
My photos
In this menu, you can review the pictures you have
taken.
To
Press the
scroll through the
pictures
navigation keys.
show the selected picture View soft key.
as an enlargement
go back to the multiple
view mode
Multi soft key.
use the options
Options soft key.
For details, see
page 153.
turn the camera off
key.
and return to idle mode
My albums
My album allows you to store the pictures as your
photo album. Select one of albums. It shows the
pictures saved in the album. For details about
viewing your pictures and using them, see
page 157.
Delete all
You can delete all the photos saved in each
category.
157
Camera
1. Scroll to a photo box and place a check mark
next to it by pressing the Select soft key.
Selecting All places check marks on all of the
photo boxes. If you want to delete the protected
photos and the caller ID photos, select the With
protected photos option and the With caller
ID photos option.
2. If necessary, repeat step 1 to check another
box.
3. When you have finished checking, press the OK
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the photos in the
box(es).
Otherwise, press the No soft key.
Settings
This menu option allows you to change the default
settings of the options for using the camera feature.
The following options are available:
Photo size: sets the image size to one from
VGA(640*480) QVGA(320*240),
,
QQVGA(160*120) and Mobile(128*120). The
selected image size displays on the capture screen.
Photo quality: allows you to select the image
quality from Super fine Fine, Normal, and
,
Economy. The option you select appears on the top
of the display.
158
Camera
Shutter sound: allows you to select a sound when
you press the shutter, the
soft key or the
Camera ( ) key on the right side of the phone.
Note: This sound setting is not applied to the Multi-
shot sound.
Flash light: allows you to set the camera flash to
automatic or manual use.
Manual: to switch the camera flash on or off, you
have to press the
0
key in the capture mode.
Automatic: when you press the shutter, the
soft
key or the Camera ( ) key on the right side of the
phone, the phone lights a flashlight. After a while
the camera will take a picture and the flashlight will
go out.
Default name: allows you to change the default
prefix name of the picture.
Memory status
Camera, Media box and multimedia message boxes
share a given amount of memory in your phone.
The display shows the status of free and used
memory.
You can see the used memory status of Camera,
Media box and multimedia message boxes by
pressing the Left or Right key.
159
Phone settings
Many different features of your phone can be
customised to suit your preferences via the
Phone settings menu.
Display
You can change the background image and the
colour of the components on the display according
to your preference and needs.
Wallpaper
This option allows you to change the background
image to be displayed in idle mode.
The following options are available:
Animations: allows you to select one of the
animations.
Photos: allows you to select one of the photos
taken by the camera.
Images: allows you to select one of the images
from the Images menu option in the Media box
menu that are downloaded from the WAP sites, the
EasyStudio PC software or multimedia messages.
Text position: allows you to select the position of
the text displayed on the idle screen, such as the
operator’s name, current date and time, and text
notifications of missed calls or new messages.
Choose either Top or Bottom. If you set this option
to Off, your phone displays only the wallpaper
image.
160
Phone settings
Text style: allows you to set the style of the text
displayed on the idle screen.
Note: When you set the wallpaper image to
Calendar, the Text position and Text style
options don’t work.
Skin
You can change the colour setting of the display
components, such as soft key indications area or
the menu names and icons.
Backlight
You can specify how long the phone uses the
backlight.
Select how long the backlight remains on after the
last key is pressed.
LCD brightness
This option allows you to adjust the brightness of
the display screens to make them lighter or darker.
1. Adjust the contrast by using the Up and Down
keys or the volume keys on the left side of the
phone.
2. When you are satisfied, press the OK soft key to
save the selection.
161
Phone settings
Greeting message
This menu option allows you to set a greeting
message to be displayed briefly when the phone is
switched on.
When you access this menu, the current message
displays.
To
Press the
C key and hold it down.
clear the existing
message
enter a new
message
appropriate alphanumeric
keys.
save your input
OK soft key.
cancel your input
and return to idle
mode
key.
For further information about how to enter
characters, see page 41.
Language
You can select a different language for the display
text and text input modes. The following options
are available:
Text language: allows you to change the language
of the display text, such as menus, options or
warning messages.
Input mode: allows you to set the default
language to be used in the text input mode.
162
Phone settings
Security
The security settings enable you to restrict the use
of your phone to people and types of calls of your
choice.
Various codes and passwords are used to protect
the features of your phone. For more information,
see page 174 -176.
PIN check
When the PIN check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
The following options are available:
Disable: the phone connects directly to the
network when you switch it on.
Enable: you must enter the PIN each time the
phone is switched on.
To change your PIN, see the Change PIN menu
option below.
Change PIN
This feature allows you to change your current PIN
to a new one, provided that the PIN check feature is
enabled. You must enter the current PIN before you
can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
163
Phone settings
Phone lock
When the Phone lock feature is enabled, the phone
is locked and you must enter the 8-digit phone
password each time the phone is switched on.
The password is preset to “00000000” at the
factory. To change the phone password, see the
Change password menu option below.
Once the correct password has been entered, you
can use the phone until you switch it off.
The following options are available:
Disable: you are not asked to enter the phone
password when you switch the phone on.
Enable: you are required to enter the phone
password when you switch the phone on.
Change password
The Change password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
The password is preset to “00000000” at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
Privacy
This feature allows you to lock or unlock the usage
of the contents, such as multimedia messages,
photos, images and sounds.
To enable or disable the Privacy feature, you must
enter your phone password.
164
Phone settings
SIM lock
To enable the SIM lock feature, you must enter a
new four to eight digit phone password, and confirm
it by entering it again.
The following options are available:
Disable: you can use any other SIM cards with
your phone.
Enable: you must enter the SIM lock code to use
another SIM card with your phone.
To unlock the SIM, enter the SIM lock code.
FDN mode
The FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
The following options are available:
Disable: you can phone any number.
Enable: you can only phone numbers stored in
Phonebook. You must enter your PIN2.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
To change your PIN2, see the Change PIN2 menu
option below.
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
165
Phone settings
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
Auto redial
With the Auto redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
Note: The interval between two call attempts varies.
The following options are available:
Off: the number is not redialled.
On: the number is redialled automatically.
Voiceclarity
This menu option makes a sound loud and clear.
It is useful when you are in a noisy place.
The following options are available:
Off: the phone does not turn on the voiceclaity.
On: the phone turns on the voiceclaity when you
are in a noisy place.
166
Phone settings
Slide settings
You can select the phone’s action when you slide
the folder up or down.
Up: you can select either None or Accep call
.
If you select the None option, you have to press a
key to answer a call, depending on the setting of
the Anykey answer option.
Otherwise if you select the Accep call option, you
can simply slide the folder up to answer a call.
Down: you can select either Stop operation or
Continue operation.
If you select the Stop operation option, the phone
stops the current operation and locks the keypad
automatically, when you slide the folder down.
Otherwise if you select the Continue operation
option, the phone performs the current operation
continuously, when you slide the folder down. But
the confirming message to lock the keypad appears
on the display in the idle mode.
Anykey answer
You can answer incoming calls by pressing anykey
or not.
Off: you can only press
or the Accept soft key
to answer incoming calls.
On: you can press any key, except
to answer
incoming calls.
167
Phone settings
Infrared activation
In this menu, you can activate or deactivate the
infrared port.
The following options are available:
Off: deactivates infrared feature on the phone.
On: activates the infrared feature on the phone.
The IrDA icon (
display.
) appears on the top line of the
If there is no communication between your phone
and the IrDA-compliant device within 1 minute of
activating the feature, it is automatically
deactivated.
Reset settings
This menu option allows you to reset your phone to
its default configuration. You can reset the sound
settings, phone settings or all of the settings
together.
1. Select one of the settings to reset by pressing
the Select soft key.
2. When a confirming message appears, press the
Yes soft key to reset settings. Then enter the
phone password and press the OK soft key.
The password is preset to “00000000” by
default. To change it, see page 164.
Otherwise, press the No soft key.
168
Line Service)
The ALS feature enables two lines to be associated
with one SIM card. Consequently, you can make
and receive calls on either line. If you subscribe to
this network service, a few additional menu options
enable you to set up this feature.
Note: Please contact your service provider to check
the availability of this feature and how to
subscribe to ALS.
Selecting a line
You can select a line for each call via the Active
line menu option. For further details, refer to
page 82.
Editing the line name
You can edit the name of each line via the Own
number menu option.
When you edit the name of a line, this name
replaces “Line 1” or “Line 2”, as applicable. For
further details, refer to page 66.
Setting the ring type
To distinguish between incoming calls on the two
lines, you can select a different ring tone for each
line via the Incoming calls menu option. For
further details, see page 83.
169
Using ALS (Alternate Line Service)
Setting call diverting options
You can set up call diverting via the Call diverting
menu option. This service reroutes incoming calls
on the line of your choice to the specified number.
For further details, see page 74.
Viewing call information
You can view call times and last call cost
information for each line. For further details, see
page 72.
170
Solving problems
Before contacting the after-sales service, perform
the following simple checks. They may save you the
time and expense of an unnecessary service call.
When you switch your phone on, the
following messages may appear
“Insert SIM” displays
Check that the SIM card is correctly installed.
Phone locked Enter password
The Phone lock feature is enabled. You must enter
the phone’s password before you can use the
phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, you must enter the PIN. To
disable this feature, use the PIN check menu
option. See page 163.
Enter PUK
The PIN was entered wrongly three times in
succession and the phone is now blocked. Enter the
PUK supplied by your network operator.
171
Solving problems
“No service” displays
• The network connection was lost. You may be in a
weak reception area (in a tunnel or surrounded
by buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
You have entered a number but it was
not dialled
• Have you pressed the
key?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Your correspondent cannot reach you
• Is your phone switched on (the
for more than one second)?
key pressed
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
Your correspondent cannot hear you
speaking
• Have you switched off the microphone (Mute
appears)?
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom
of the phone.
172
Solving problems
The phone starts beeping and “Battery
low” flashes on the display
The battery is insufficiently charged. Replace the
battery and recharge it.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
); the number of bars indicates the signal
strength from strong ( ) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
No number is dialled when you recall a
Phonebook entry
• Check that the number has been stored correctly,
by using the Phonebook search feature.
• Re-store them, if necessary.
If the above guidelines do not help you to solve
the problem, take a note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung
after-sales service.
173
Access codes
There are several access codes that are used by
your phone and its SIM card. These codes help you
protect the phone against unauthorised use.
Some access codes can be changed using the
Security menu option. See page 163 for further
details.
Phone password
The Phone lock feature (see page 164) uses the
phone password to protect your phone against
unauthorised use.
The phone password is supplied with the phone and
is preset to “00000000” at the factory. To change
the password, use the Change password menu
option. See page 164.
PIN
The PIN (Personal Identification Number) protects
your SIM card against unauthorised use. It is
usually supplied with the SIM card. When the PIN
check feature is enabled (see page 163), you must
enter the PIN each time you switch on the phone.
If you key in an incorrect PIN three times in
succession, key in the PUK and press the OK soft
key to unlock the phone. Key in a new PIN and
press the OK soft key. Key in the new PIN again and
press the OK soft key.
174
Access codes
PIN2
The PIN2, supplied with some SIM cards, is required
to access some functions, such as charging unit
counters. These functions are only available if
supported by your SIM card.
If you key in an incorrect PIN2 three times in
succession, key in the PUK2 and press the OK soft
key to unlock the phone. Key in a new PIN2 and
press the OK soft key. Key in the new PIN2 again
and press the OK soft key.
PUK
The PUK (PIN Unblocking Key) is required to change
a blocked PIN. The PUK may be supplied with the
SIM card. If not, contact your local service provider.
If you key in an incorrect PUK ten times in
succession, the SIM card cannot be used anymore.
Contact your service provider for a new card.
You cannot change the PUK. If you lose the code,
contact your service provider.
PUK2
The PUK2, supplied with some SIM cards, is
required to change a blocked PIN2.
If you key in an incorrect PUK2 ten times in
succession, you cannot use the functions requiring
the PIN2. Contact your service provider for a new
card.
175
Access codes
You cannot change the PUK2. If you lose the code,
contact your service provider.
Call barring password
The 4-digit call barring password is required when
you use the Call barring function. You obtain the
password from your service provider when you
subscribe to this function.
You can change this password using the Change
barring password menu option. For further
details, see page 78.
176
Health and safety
information
SAR certification information
This phone meets European Union (EU)
requirements concerning exposure to radio waves.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured, so as not
to exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by the EU Council.
These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the
general population. The guidelines were developed
by independent scientific organisations through the
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
The exposure standard for mobile phones employs
a unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by
*
the EU Council is 2.0W/kg.
The Highest SAR Value for this model
phone was 0.506 W/kg.
* The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten grams of body
tissue. The limit incorporates a substantial margin of
safety to give additional protection for the public and to
account for any variations in measurements. The SAR
values may vary depending on national reporting
requirements and the network band.
177
Health and safety information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
network. In general, the closer you are to a base
station, the lower the power output of the phone.
Before a new model phone is available for sale to
the public, compliance with the European R&TTE
Directive must be shown. This directive includes as
one of its essential requirements the protection of
the health and safety of the user and any other
person.
Precautions when using batteries
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge and the type of battery and
charger used. The battery can be charged and
discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and
178
Health and safety information
standby time) is noticeably shorter than normal,
it is time to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-
approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
179
Health and safety information
Road safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, make sure that you are
following the special regulations in a given area or
country.
Operating environment
Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
180
Health and safety information
Electronic devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
recommendations of Wireless Technology Research.
Persons with pacemakers:
• Should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on
• Should not carry the phone in a breast pocket
Should use the ear opposite the pacemaker to
minimise potential interference
If you have any reason to suspect that interference
is taking place, switch your phone off immediately.
Hearing aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
181
Health and safety information
Other medical devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch your phone off
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted
notices require you to do so.
182
Health and safety information
Potentially explosive atmospheres
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are
reminded of the need to observe restrictions on the
use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
Emergency calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical
emergencies, for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
183
Health and safety information
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
To make an emergency call, proceed as follows.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 112 or any other official
emergency number). Emergency numbers vary
by location.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not cut off the call until given
permission to do so.
Other important safety information
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Check regularly that all wireless phone equipment
in your vehicle is mounted and operating
properly.
184
Health and safety information
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Switch off your phone before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
Care and maintenance
• Keep the phone and all its parts and accessories
out of the reach of small children’s.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode
electronic circuits.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
185
Health and safety information
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
• Use only the supplied or an approved
replacement antenna. Unauthorised antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
186
Glossary
To help you understand the main technical terms
and abbreviations used in this booklet and take full
advantage of the features of your mobile phone,
here are a few definitions.
ALS (Alternate Line Service)
Capability of associating two lines with one SIM
card. With this service, you can make and receive
calls on either line, as required.
Call barring
Ability to restrict outgoing and incoming calls.
Call diverting
Ability to reroute calls to another number.
Call holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call waiting
Ability to inform users that they have an incoming
call when engaged on another call.
CLI (Caller Line Identification) services
Services allowing subscribers to view or block the
telephone numbers of callers.
187
Glossary
EMS (Enhanced Message Service)
Network service sending and receiving messages
that include images, sounds and animations to and
from another user without having to speak to the
correspondent.
GPRS (General Packet Radio Service)
New non-voice value-added service that allows
information to be sent and received across a mobile
telephone network. GPRS guaranties continuous
connection to the Internet for mobile phone and
computer users. It is based on the Global System
for Mobile Communication (GSM) circuit-switched
cellular phone connections and the Short Message
Service (SMS).
GSM (Global System for Mobile
communication)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
IrDA (Infrared Data Association)
A standard defined by the IrDA consortium. It
specifies a way to wirelessly transfer data via
infrared radiation. The IrDA specifications include
standards for both the physical devices and the
protocols they use to communicate with each other.
MMS (Multimedia Message Service)
A message service for the mobile environment,
standardized by the WAP Forum and the 3rd
Generation Partnership Program (3GPP). For phone
188
Glossary
users, MMS is similar to Short Message Service
(SMS)-it provides automatic, immediate delivery of
user-created content from phone to phone. The
message addressing used is primarily phone
numbers, thus the traffic goes from phone to
phone. MMS also provides support for e-mail
addressing, so that messages can also be sent by
e-mail. In addition to the text content of SMS, MMS
messages can contain still images, voice or audio
clips, and later also video clips and presentation
information.
Multiparty calling
Ability to establish a conference call involving up to
five additional parties.
PIN (Personal Identification Number)
Security code that protects the phone/SIM against
unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Roaming
Use of your phone when you are outside your home
area (when travelling for example).
189
Glossary
SDN (Service Dialling Numbers)
Telephone numbers supplied by your network
provider and giving access to special services, such
as voice mail, directory inquiries, customer support
and emergency services.
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot
on the back of the phone and is protected by the
battery.
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to
speak to the correspondent. The message created
or received can be displayed, received, edited or
sent.
Soft keys
Two keys marked
purpose of which:
and
on the phone, the
• varies according to the function that you are
currently using
• is indicated on the bottom line of the display just
above the corresponding key
Voice mail
Computerised answering service that automatically
answers your calls when you are not available,
plays a greeting (optionally in your own voice) and
records a message.
190
Index
log • 28
making • 27
missed • 29 70
multi-party • 38
received • 70
records • 70
redialling • 28
automatically • 166
rejecting • 30
A
ABC mode • 41
Access codes • 174
Accessories •
Active line
,
45
,
9
select • 82
service, use • 169
Alarm, set • 142
Alert type • 84
ALS • 169
ring tone • 83
searching for a number
in phonebook • 56
times • 72
Autopower alarm • 143
waiting • 37
,
79
B
Card, SIM
background image, set • 160
Backlight • 16
Barring
dialling numbers • 62
inserting • 18
locking • 165
calls • 76
removing • 19
Battery
Care • 185
Characters
charging • 21
installing • 19
low battery indicator •
22
entering • 41
Clock • 140
Conference calls • 38
Connection tone • 85
Conversion, unit • 147
Cost of calls • 72
precautions • 178
removing • 20
Broadcast • 108
C
D
Calculator • 146
Calendar • 136
Caller
Date, set • 140
Dialled calls • 71
Dialling • 27
SIM card numbers • 62
Display
groups • 67
ID • 81
Calls
brightness • 161
icons • 14
alert type • 84
answering • 30
a second call • 37
barring • 76
costs • 72
dialled • 71
diverting • 74
emergency • 183
ending • 30
holding • 36
international • 28
language • 162
DTMF tones, send • 33
E
Earpiece volume • 31
Emergency calls • 183
External speaker • 40
191
Index
F
M
FDN mode • 165
Fixed Dial Number mode •
165
Fun box • 115
Functions, select • 24
Maintenance • 185
Media box • 121
Memory status, phonebook •
68
Memos
making • 134
viewing • 138
Menu
list • 50
scrolling • 49
Messages
,
137
G
Greeting message • 162
Group settings • 67
MMS • 95
SMS • 88
Messages • 88
I
Icons • 14
Inbox • 91
alert types • 84
broadcast • 108
deleting • 94 106
greeting • 162
inbox • 91
outbox • 93
preset • 107
reading • 91
ring tone • 84
Input mode
changing • 42
language, set • 162
International calls • 28
Internet • 115
,
K
Key tones
voice mail • 107
writing • 89
Microphone, mute • 32
Minute minder • 86
type, select • 86
volume • 31
Keys
location • 10
Missed calls • 29
,
70
Multi-party calls
making • 38
L
private conversation • 39
removing a participant •
39
Language, set • 162
LCD
brightness • 161
icons • 14
N
Names
settings • 160
Length of calls • 72
,
86
Letters
entering • 41
Locking
entering • 41
searching/dialling • 56
storing • 59
phone • 164
Network selection • 80
Network services • 74
Numbers
SIM card • 165
Low battery indicator • 22
correcting • 27
FDN • 165
mode • 41 48
,
192
Index
speed-dial • 60
storing • 59
Redialling
automatically • 166
Reset settings • 168
Ringer
O
incoming calls • 83
messages • 84
Options, select • 24
Organiser • 134
Road safety • 180
Outbox • 93 103
,
S
Safety
P
Password
batteries • 178
explosive atmospheres •
183
barring • 78
,
176
174
phone • 164
,
Personal Identification
Number • 174
Phone
information • 177, 184
operating environment •
180
layout • 10
settings • 160
precautions •
road • 180
7
switching on/off • 23
Phonebook • 56
Second call, answer• 37
Security settings • 163
Service directory, dial • 68
Settings
copying numbers • 58
deleting numbers • 58
editing numbers • 58
erasing numbers • 58
memory status • 68
sending SMS • 58
storing numbers/names
alarm • 142
date • 140
display • 160
network • 74
phone • 160
reset • 168
security • 163
sound • 83
text language • 162
time • 140
•
59
PIN • 174
changing • 163
checking • 163
PIN2 • 175
changing • 165
Power on/off tone • 85
Preset messages • 107
Problem, solve • 171
PUK • 175
SIM card
dialling numbers • 62
inserting • 18
locking • 165
removing • 19
SMS • 88
PUK2 • 175
Soft keys, use • 24 25
,
Sound settings • 83
Speed-dialling • 60
Stopwatch • 150
Switching on/off
Q
Quiet mode • 86
microphone • 32
phone • 23
Symbolic mode • 41, 48
R
Received calls • 70
193
Index
T
T9 mode • 41
Text
,
43
entering • 41
input modes • 41
language • 162
Time
setting • 140
world • 140
Timer • 149
To do list • 139
Tone
connection • 85
keypad • 86
message • 84
power on/off • 85
Travel adapter • 21
V
Voiceclarity • 34
Volume
call ringer • 84
earpiece • 31
keys • 31
W
Waiting call • 37 79
,
WAP Browser • 115
World time • 140
WWW Services • 115
194
195
196
|