Samsung SGH A200 User Manual

00-A200-Cover&Contents 3/14/01 3:46 PM Page 2  
DUAL BAND  
GSM TELEPHONE  
SGH-A200  
OWNER’S MANUAL  
Printed in Korea  
Code No.:GH68-HK.  
2001/03. Rev.1.0  
World Wide Web  
00-A200-Cover&Contents 3/14/01 3:46 PM Page 2  
Contents(Continued)  
Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74  
Ring Tone (Menu 4-1) . . . . . . . . . . . . . . . . . . . . . . . . .74  
Melody Composer (Menu 4-2) . . . . . . . . . . . . . . . . . .75  
Ring Volume (Menu 4-3) . . . . . . . . . . . . . . . . . . . . . . .77  
Alert Type (Menu 4-4) . . . . . . . . . . . . . . . . . . . . . . . . .77  
Keypad Tone (Menu 4-5) . . . . . . . . . . . . . . . . . . . . . . .78  
Message Tone (Menu 4-6) . . . . . . . . . . . . . . . . . . . . .78  
Error Tone (Menu 4-7) . . . . . . . . . . . . . . . . . . . . . . . . .79  
Minute Minder (Menu 4-8) . . . . . . . . . . . . . . . . . . . . .79  
Connect Tone (Menu 4-9) . . . . . . . . . . . . . . . . . . . . . .79  
Selecting Functions and Options . . . . . . . . . . . . . 47  
Example: Selecting a Ring Tone . . . . . . . . . . . . . . . .49  
Using the Menu . . . . . . . . . . . . . . . . . . . . . . . . 51  
Accessing a Menu Function by Scrolling . . . . . . . .51  
Accessing a Menu Function by  
Using its shortcut . . . . . . . . . . . . . . . . . . . . . . . . . . . .52  
List of Menu Functions . . . . . . . . . . . . . . . . . . . . . . . 53  
Call Records . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Missed Calls (Menu 1-1) . . . . . . . . . . . . . . . . . . . . . . .58  
Received Calls (Menu 1-2) . . . . . . . . . . . . . . . . . . . . .58  
Dialled Calls (Menu 1-3) . . . . . . . . . . . . . . . . . . . . . . . 59  
Call Time (Menu 1-4) . . . . . . . . . . . . . . . . . . . . . . . . . .59  
Call Cost (Menu 1-5) . . . . . . . . . . . . . . . . . . . . . . . . . .60  
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80  
Phone Settings (Menu 5-1) . . . . . . . . . . . . . . . . . . . . . 80  
Network Services (Menu 5-2) . . . . . . . . . . . . . . . . . .86  
Security Settings (Menu 5-3) . . . . . . . . . . . . . . . . . . .96  
LCD Contrast (Menu 5-4) . . . . . . . . . . . . . . . . . . . . . .99  
Browser Settings (Menu 5-5) . . . . . . . . . . . . . . . . . .100  
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
Voice Mail (Menu 2-1) . . . . . . . . . . . . . . . . . . . . . . . . .61  
Read Messages (Menu 2-2) . . . . . . . . . . . . . . . . . . . .62  
Write Messages (Menu 2-3) . . . . . . . . . . . . . . . . . . . .64  
Preset Message List (Menu 2-4) . . . . . . . . . . . . . . . .65  
Setup (Menu 2-5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65  
Broadcast (Menu 2-6) . . . . . . . . . . . . . . . . . . . . . . . . .66  
Organizer . . . . . . . . . . . . . . . . . . . . . . . . . . . 101  
Scheduler (Menu 6-1) . . . . . . . . . . . . . . . . . . . . . . . .101  
Alarm (Menu 6-2) . . . . . . . . . . . . . . . . . . . . . . . . . . . .103  
Calculator (Menu 6-3) . . . . . . . . . . . . . . . . . . . . . . . .105  
To Do List (Menu 6-4) . . . . . . . . . . . . . . . . . . . . . . . .107  
Calendar (Menu 6-5) . . . . . . . . . . . . . . . . . . . . . . . . .108  
World Time (Menu 6-6) . . . . . . . . . . . . . . . . . . . . . . .109  
Clock (Menu 6-7) . . . . . . . . . . . . . . . . . . . . . . . . . . . .110  
Voice Functions . . . . . . . . . . . . . . . . . . . . . . . . . 68  
Voice Dial (Menu 3-1) . . . . . . . . . . . . . . . . . . . . . . . . .68  
Voice Command (Menu 3-2) . . . . . . . . . . . . . . . . . . . .71  
Voice Memo (Menu 3-3) . . . . . . . . . . . . . . . . . . . . . . .71  
AnswerPhone (Menu 3-4) . . . . . . . . . . . . . . . . . . . . . .73  
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111  
WWW Services . . . . . . . . . . . . . . . . . . . . . . . . 112  
Launching the Browser . . . . . . . . . . . . . . . . . . . . . . .112  
Navigating the Browser . . . . . . . . . . . . . . . . . . . . . . 113  
Network Connecting Information . . . . . . . . . . . . . . .115  
2
3
00-A200-Cover&Contents 3/14/01 3:46 PM Page 4  
Safety Precautions  
Contents(Continued)  
Read these simple guidelines. Failure to comply with  
them may be dangerous or illegal. For more detailed  
safety information, see “Safety Information” on page  
126.  
Additional Services . . . . . . . . . . . . . . . . . . . . . 116  
ALS(Alternate Line Service) . . . . . . . . . . . . . . . . . . 116  
Solving Problems . . . . . . . . . . . . . . . . . . . . . . 118  
Reference Information . . . . . . . . . . . . . . . . . . . 121  
Access Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121  
Using the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . .124  
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . .126  
Road safety comes first  
Do not use a hand-held phone while driving; park the  
vehicle first. Remember that in some countries, it is  
illegal to use a hand-held phone while driving.  
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134  
Switch off when refuelling  
Do not use the phone at a refuelling point (service  
station) or near fuels or chemicals.  
Switch off in aircraft  
Wireless phones can cause interference. Using them  
on aircraft is both illegal and dangerous.  
Switch off in hospital  
Follow any regulations or rules. Switch phone off  
near medical equipment.  
Respect special regulations  
Follow any special regulations in force in any area  
and always switch off your phone whenever it is for-  
bidden to use it, or when it may cause interference or  
danger (in a hospital for example).  
Interference  
All wireless phones may be subject to radio interfer-  
ence, which may affect their performance.  
4
5
01-A200-Safety1 3/14/01 3:46 PM Page 6  
S a f e t y P re c a u t io n s  
Unpacking  
Use qualified servicing  
Only qualified service personnel must repair  
equipment.  
Your package contains the following items.  
Use sensibly  
Use only in the normal position (to the ear). Do not  
touch the antenna unnecessarily when the phone is  
switched on.  
Emergency calls  
Travel Adapter  
Ensure the phone is switched on and in service.  
Phone with a case  
Enter the emergency number and press  
. Give your  
location. Do not end the call until told to do so.  
Non-Ionising Radiation  
No part of the human body should come into contact  
with the antenna during normal operation.  
Wearable  
EarMicrophone  
Batteries  
IMPORTANT! Only SAMSUNG-approved  
accessories and batteries should be used with this  
product. The use of any other power accessory will  
invalidate any approval or warranty applying to the  
phone, and may be dangerous.  
CAUTION  
Hand String  
Owner’s Manual  
Replace only with the same or equivalent type  
recommended by the manufacturer. Dispose of used  
batteries according to the manufacturer’s  
instructions.  
In addition, you can obtain the following accessories  
for your phone from your local SAMSUNG dealer:  
Cigarette lighter adapter (CLA12)  
Hands-free car kit (HFKN30)  
• Slim and Standard batteries (BSL0375, BST0378)  
Data kit (PCD9634)  
Desktop cradle  
6
7
01-A200-Safety1 3/14/01 3:46 PM Page 8  
Yo u r P h o n e  
Your Phone  
Phone Layout  
The following illustrations show the main elements  
of your phone.  
Antenna  
Earphone jack  
Earpiece  
External display  
Service light  
Display  
Key  
Functions  
Volume  
Soft keys perform the functions indicated  
by the text above them (in the bottom line  
of the display).  
During a call, adjusts  
the earpiece volume.  
In idle mode with the  
phone open, the keys  
adjust the key tone  
volume.  
To reject an incoming  
call, press and hold  
the volume key when  
the flip cover is  
In the menu facility, scroll through the  
menu options and phonebook memory.  
In idle mode, performs as a hot key to the  
several menus respectively.  
When entering a letter, move the cursor left  
and right respectively.  
closed.  
Microphone  
8
9
01-A200-Safety1 3/14/01 3:46 PM Page 10  
Yo u r P h o n e  
Yo u r P h o n e  
Display  
Key  
Functions (continued...)  
Display Layout  
Deletes characters from the display.  
In idle mode, allows you to quick access to  
the WWW services menu.  
The display comprises three areas.  
Makes or answers a call.  
In idle mode, recalls the last number dialled.  
In the menu facility, selects a menu function  
or stores information that you have entered  
(such as a name) in the phone or SIM  
memory.  
Icons  
Text and  
graphic area  
k  
Soft key  
indications  
Ends a call. Also switches the phone on and  
off when pressed and held.  
In the menu facility, returns to the idle  
mode and cancels your input.  
Area  
First line  
Description  
Displays various icons (see below).  
Enters numbers, letters and some special  
characters.  
Middle lines Display messages, instructions and  
any information that you enter  
Used for various purposes in different  
functions.  
(number to be dialled, for example).  
When pressed and held down in idle mode,  
the key toggles the alert type from the  
current alert type to vibraton.  
Last line  
Shows the functions currently  
assigned to the two soft keys and  
the divert icon.  
10  
11  
01-A200-Safety1 3/14/01 3:46 PM Page 12  
Yo u r P h o n e  
Yo u r P h o n e  
Icons  
Backlight  
The display and keypad are illuminated by a  
backlight. When you press any key, the backlight  
illuminates. It turns off if no key is pressed within a  
given period of time, depending on the Backlight  
option set in the Phone Settings menu. The  
backlight remains on at all times when the phone is  
connected to a car kit (optional).  
Signal strength : Shows the received  
signal strength. The greater the number  
of bars, the better the signal strength.  
Service: Appears when a call is in  
progress.  
To specify the length of time for which the backlight  
is active, set the Backlight menu option (5-1-5); see  
page 82 for further details.  
New Message: Appears when a new  
text message has been received.  
New Voice Mail: Appears when a new  
voice mail message has been received.  
External Display  
Your phone has an external display on the cover. It  
also shows Signal strength, Vibrator, and Battery  
Strength icon. It indicates that you have an incoming  
call or message, missed calls and alarms you at the  
specified time when you set an alarm.  
Vibrator on: Appears when the vibrate  
mode is on. An incoming call will vibrate  
the phone rather than ring it.  
Alarm on: Appears when you set an  
alarm.  
When you press and hold the volume key with the  
phone closed, the backlight of external display  
illuminates.  
Battery strength: Shows the level of  
your battery. The more bars you see, the  
more power you have left.  
External  
display  
12  
13  
02-A200-Getting1 3/14/01 3:45 PM Page 14  
Yo u r P h o n e  
Getting Started  
Service Light  
Installing the SIM Card and the Battery  
The service light is on the top right-hand corner of  
the phone. It flashes when services are available on  
the phone.  
Keep all miniature SIM cards out of the reach of  
small children.  
The SIM card and its contacts can easily be  
damaged by scratches or bending, so be careful  
when handling, inserting or removing the card.  
Before installing the SIM card, always make sure  
that the phone is switched off and then remove  
the battery.  
To activate or deactivate use of the service light, set  
the Service Light menu option (5-1-6); see page 83  
for further details.  
1. If necessary, switch off the phone by holding  
down  
until the closing animation is  
displayed.  
Service light  
2. Pull and hold the catch above the battery on the  
back of the phone.  
14  
15  
02-A200-Getting1 3/14/01 3:45 PM Page 16  
Ge t t in g S t a rt e d  
Ge t t in g S t a rt e d  
3. Lift the battery away using the grooves on both  
sides of the battery.  
5. Hold the SIM card down and release the holder to  
lock it into place.  
Groove  
6. Place the battery back on the phone. First insert  
the teeth on the bottom of the battery into the  
corresponding slots, then push the battery against  
the back of the phone until it clicks into place.  
Make sure the battery is properly installed before  
switching on the power.  
4. Push the SIM card holder in the direction of the  
arrow and hold it in this position. Insert the SIM  
card under the two tabs on the left of the phone,  
ensuring that the cut corner is top left and the  
gold contact of the card face into the phone.  
16  
17  
02-A200-Getting1 3/14/01 3:46 PM Page 18  
Ge t t in g S t a rt e d  
Ge t t in g S t a rt e d  
Note: Do not remove the battery from the phone  
while the travel adapter is being connected to  
the phone.  
Charging a Battery  
Your phone is powered by a rechargeable Li-ion  
battery. Use only approved batteries and chargers.  
Ask your local SAMSUNG dealer for further details.  
Using a Desktop Cradle  
1. Connect the lead from the travel adapter to the  
desktop cradle.  
Note: You must fully charge the battery before using  
your phone for the first time. A discharged  
battery is fully recharged in approximately  
120 minutes for a slim battery, 150 minutes for  
a standard battery.  
2. Align the tabs at the bottom of the battery with  
the corresponding slots in the desktop cradle and  
push the battery down until you hear a click.  
Using a Travel Adapter  
The phone can be used while the battery is charging.  
1. Connect the lead from the travel  
adapter to the bottom of the  
phone. Check that the arrow on  
the lead connector is facing  
3. Connect the adapter to a standsrd AC wall outlet.  
The LED on the cradle indicate the following:  
Red: the battery is charging  
towards the front of the phone.  
Green: the battery is fully charged.  
Yellow: the battery is not plugged in correctly or  
operating at a temperature that is too high  
or too low.  
2. Connect the adapter to a standard AC wall outlet.  
When the battery is charging, the battery icon  
in the top right-hand corner of the display fills  
repeatedly.  
4. When charging is finished, disconnect the adapter  
from the power outlet.  
3. When charging is finished,  
disconnect the adapter from the  
power outlet.  
Push up and hold the catch of the desktop cradle  
and lift the battery away.  
Disconnect the adapter from the  
phone by pressing the grey tabs  
on either side of the connector and pulling the  
connector out.  
18  
19  
02-A200-Getting1 3/14/01 3:46 PM Page 20  
Ge t t in g S t a rt e d  
Ge t t in g S t a rt e d  
Low Battery Indicator  
<Service Provider>  
Fe b 0 3 Sat urday  
1 2 :5 7  
1 2 : 5 7  
Sat 0 2 / 0 3  
When the battery is weak and only a few minutes of  
talk time remain, you will hear a warning tone and a  
message will be repeated at regular intervals on the  
display:  
Me nu  
Pho ne Bo o k  
<Main display>  
<External display>  
Note: The display language is determined by the  
SIM card inserted. To change the language,  
use the Language menu option (5-1-3); for  
further details, refer to page 81.  
** Warning**  
Bat t e ry Low  
5. When you wish to switch the phone off, hold down  
for more than two seconds.  
When the battery becomes too weak for the phone  
operate, it switches off automatically.  
Using the Earmicrophone  
Switching the Phone On/ Off  
When you connect the earmicrophone to the jack on  
the top of the phone, the button on the  
earmicrophone will operate as below without  
opening the phone or pressing a key on the phone.  
1. Open the phone.  
2. Hold down  
for more than one second to  
switch the phone on.  
Redialling a last call: Press the button twice in idle  
mode.  
3. If the phone asks for a password, key in the  
password and press the Ok soft key. The  
password is factory set to 0000. For further  
details, see page 121.  
Answering a call: press the button when a call  
comes in.  
Ending a call: press the button during a call.  
Note: You can use the voice dialling or voice  
command by pressing the button, when the  
Active Folder menu option (5-1-0) is set Voice  
Dial or Voice Command. For further details,  
refer to page 84.  
4. If the phone asks for a PIN, key in the PIN and  
press the Ok soft key. For further details, see  
page 122.  
When system locates services, the idle screen,  
illustrated below, is displayed on the main display  
and the external display respectively.  
20  
21  
03-A200-Call1 3/14/01 3:46 PM Page 22  
Ca ll Fu n c t io n s  
Call Functions  
Ending a Call  
When you have finished your call, briefly press  
.
Making a Call  
When the idle screen is displayed, key in the area  
Making a Call using the Phonebook  
code and phone number and press  
.
You can store the names and phone numbers called  
regularly in the SIM card and phone memory, called  
the phonebook. You then simply select the required  
name to recall the associated number. For further  
details on the Phonebook feature, refer to page 35.  
Note: If you have set the Auto Redial option (5-1-7) to  
ON (see page 83) and the person youve called  
does not answer or the line is busy, the number  
is redialled automatically up to ten times.  
Quick dialling with the SIM location number press  
and hold the associated digit key for the SIM  
location 2 through 9.  
International Calls  
1. Press and hold down  
for the international  
prefix. The + character appears.  
2. Key in the country code, area code and phone  
Voice Dialling  
number and press  
.
If you have set the Active Folder option (5-1-0) to  
ON (see page 84), your phone also allows you to say  
a name when you open the phone. It then automa-  
tically dials the number stored with that name. For  
further details on the Voice Dialling feature, refer to  
page 68.  
Correcting the Number  
To clear...  
Then...  
The last digit  
displayed  
Press the  
soft key.  
Any other digit  
in the number  
Press  
or  
key until  
Last Number Redial  
the cursor ( x) is immediately  
to the right of the digit to be  
cleared.  
The phone stores the last 10 numbers dialled. To  
recall any of these numbers, proceed as follows.  
Press the  
soft key.  
1. If there are any characters on the display, press  
to return to idle mode.  
The whole display Hold down the  
soft key for  
more than one second.  
22  
23  
03-A200-Call1 3/14/01 3:46 PM Page 24  
Ca ll Fu n c t io n s  
Ca ll Fu n c t io n s  
Answering a Call  
2. Press  
numbers.  
to access the list of last-dialled  
When somebody calls you, the phone rings and the  
phone icon in the middle of the screen flashes.  
3. Use  
or  
to scroll through the Redial list  
until the required number is displayed.  
4. Press to dial the number displayed.  
If the caller can be identified, the  
caller’s phone number (or name if  
stored in your phonebook) is  
( (  
) )  
Adjusting the Volume  
displayed. If the caller cannot be  
identified, Call 1 is displayed.  
During a call, if you want to adjust the earpiece  
volume, use the volume keys on the left side of the  
phone. Press  
volume.  
to increase and  
to decrease the  
1. To answer a call, open the phone. If the phone is  
already open, press or the Accept soft key.  
If the Any-key Answer menu option (5-1-4) is set  
to ON, you can press any key to answer a call  
except for  
82).  
and the Reject soft key (see page  
Note: To reject an incoming call, press the Reject  
soft key or . When the phone is closed,  
press and hold  
the phone .  
or on the left side of  
2. End the call by closing the phone or pressing  
.
Note: You can answer a call while using the  
In idle mode with the phone open, you can adjust the  
key tone volume using the same keys.  
phonebook or menu features.  
24  
25  
03-A200-Call1 3/14/01 3:46 PM Page 26  
Ca ll Fu n c t io n s  
Ca ll Fu n c t io n s  
Viewing Missed Calls  
Editing a Missed Call Number  
1. Press the Options soft key.  
2. Press the Select soft key.  
If you are unable to answer a call for any reason, you  
can find out who was calling you, if this service is  
available. In this way, you can call the person back,  
if necessary.  
3. Change the number as required. Press  
to move back through the number.  
or  
The number of missed calls is displayed on the idle  
screen immediately after the call was missed.  
4. To...  
Call the number  
Then press the...  
To view the missed call immediately, proceed as  
follows.  
key.  
Store the number  
Save soft key and enter  
the name and location  
required (for further  
1. If the phone is closed, open the phone.  
2. Press the View soft key.  
details, refer to page 35).  
The number corresponding to the most recent  
missed call is displayed, if available.  
Deleting a Missed Call  
3. To...  
Scroll through the  
Then press the...  
1. Press the Options soft key.  
2. Press or to highlight the Delete option.  
3. Press the Select soft key.  
key.  
or  
missed calls  
Call the number displayed  
key.  
You can press  
Call feature.  
at any time to exit the Missed  
Edit or delete a missed  
call number  
Options soft key  
(see the following  
paragraphs).  
Note: You can access the Missed Call feature at any  
time by selecting the Missed Calls menu option  
(1-1); for further details, see page 58.  
26  
27  
03-A200-Call1 3/14/01 3:46 PM Page 28  
Ca ll Fu n c t io n s  
Ca ll Fu n c t io n s  
In-Call Options  
Searching for a Number in the Phonebook  
Your phone provides a number of control functions  
that you can use during a call. To access these  
functions during a call, press the Options soft key.  
You can search for a number in the phonebook during  
a call.  
1. Press the Options soft key.  
Switching the Microphone Off (Mute)  
2. Press  
option.  
or  
to highlight the Phonebook  
You can temporarily switch your phone’s microphone  
off, so that the other party cannot hear you.  
3. Press the Ok soft key.  
Example: You wish to say something to another  
person in the room but do not want the  
other party to hear you.  
4. Enter the start of the name that you want to find  
and press the Find soft key.  
To switch the microphone off temporarily,  
proceed as follows.  
Note: You can also scroll through the phonebook  
from the beginning, by pressing the Find  
soft key directly.  
1. Press the Options soft key.  
The phonebook entries are listed, starting with  
the first entry matching your input. This entry is  
also highlighted.  
2. Press  
or  
to highlight the Mute option.  
3. Press the Ok soft key.  
Your correspondent can no longer hear you.  
5. To review the highlighted entry, press the View  
soft key.  
To switch the microphone back on, proceed as  
follows.  
For a more detailed description of the Phonebook  
feature, refer to page 39.  
1. Press the Options soft key.  
2. Press  
option.  
or  
to highlight the Unmute  
3. Press the Ok soft key.  
Your correspondent can hear you again.  
28  
29  
03-A200-Call1 3/14/01 3:46 PM Page 30  
Ca ll Fu n c t io n s  
Ca ll Fu n c t io n s  
Putting a Call on Hold  
Answering a Second Call  
You can place the current call on hold whenever you  
want. You can make another call while you have a  
call in progress if this service is supported by the  
network. Of these two calls, one is active and the  
other is on hold and you can swap between the calls.  
You can answer an incoming call while you have a  
call in progress, if this service is supported by the  
network and if you have set the Call Waiting menu  
option (5-2-3) to Active (see page 91). You will be  
notified of an incoming call by a call waiting tone.  
To place a call on hold, press the Option soft key,  
and select the Hold option. You can reactivate the  
call whenever you want, by pressing the Retrieve  
soft key.  
To answer a call while you have a call in progress,  
proceed as follows.  
1. Press  
to answer the incoming call.  
The first call is automatically put on hold.  
To make a call while you have a call in  
progress, proceed as follows.  
2. If you want to switch between the two calls,  
1. Key in the phone number that you wish to dial or  
look it up in the phonebook.  
press the Swap soft key.  
If you want to end a held call, press the Options  
soft key and select the End held option.  
2. Press  
to dial the second call.  
The first call is automatically put on hold.  
3. To end the current call, press  
.
Or alternatively, proceed as follows.  
Any held calls will automatically be reconnected  
to you.  
1. Put the current call on hold by pressing the  
Options soft key, followed by the Hold option.  
2. Make the second call in the normal way.  
To swap between the two calls, simply press the  
Swap soft key.  
The current call is placed on hold and the call on  
hold is reactivated so that you can continue  
conversing with the other party.  
When you have finished, end each call normally by  
pressing  
.
30  
31  
03-A200-Call1 3/14/01 3:46 PM Page 32  
Ca ll Fu n c t io n s  
Ca ll Fu n c t io n s  
2. Highlight the required person, by pressing  
or  
Making a Multiparty Call  
, followed by  
.
A multiparty call is a network service that allows  
up to six people to take part simultaneously in a  
multiparty or conference call. For more information,  
contact your service provider.  
3. Select Private.  
Now you can talk privately with that person. The  
other participants can continue to converse with  
each other.  
Setting up the Multiparty Call  
4. To return to the multiparty call, press the Options  
soft key and select Join.  
1. Call the first participant in the normal way.  
All the multiparty call participants can now hear  
each other.  
2. Call the second participant in the normal way. The  
first call is automatically put on hold.  
Dropping One Participant  
3. To join the first participant to the multiparty call,  
press the Options soft key and select the Join  
option.  
1. Press the Options soft key and choose the  
Select one option. The list of call participants  
appears.  
4. To add a new person to the multiparty call, call  
the person in the normal way, then press the  
Options soft key and select the Join option.  
2. Highlight the required person, by pressing  
or  
, followed by  
.
You can add incoming callers by answering the call  
and pressing Options, followed by Join. Repeat as  
required.  
3. Select Remove.  
The call is ended with that participant, but you  
can continue to talk with the other participants.  
Having a Private Conversation With One  
Participant  
4. End the multiparty call by closing the phone or  
pressing  
.
1. Press the Options soft key and choose the  
Select one option. The list of call participants  
appears.  
32  
33  
03-A200-Call1 3/14/01 3:46 PM Page 34  
Ca ll Fu n c t io n s  
PhoneBook  
Muting/ Sending Key Tones  
These options allow you to turn the key tones off or  
on. If the Mute keys option is selected, your phone  
does not transmit the key tones.  
You can store phone numbers and their associated  
names in the memory of your SIM card. In addition,  
you can store up to 200 numbers and names in the  
phone memory. The SIM card and phone memories,  
although physically separate, are used as if they  
were a single entity, called the Phonebook.  
Note: To communicate with answering machines or  
computerised telephony systems, the Send  
keys option must be selected.  
Storing a Phone Number with a Name  
Using the SMS Service  
As soon as you start to enter a number, Save  
appears above the left soft key to allow you to store  
the number in the phonebook.  
If you receive an SMS (Short Message Service)  
message during a call, the message icon (  
flashes in the display.  
)
1. Key in the number to be stored.  
After you have finished your call, you can read to the  
message; refer to page 62 for further details.  
2. When you are sure that it is correct, press the  
Save soft key.  
Notes:  
• If you make a mistake while entering a number,  
correct it using the  
soft key. For further  
details, refer to page 22.  
To insert a dialling pause for special phone  
services, such as banking by phone, hold down  
. P’ is displayed to indicate the pause.  
3. Enter the associated name (the maximum length  
depends on your SIM card). For information on  
how to enter a name, see page 41.  
4. When you are satisfied, press the Save soft key.  
The phone now displays the first free location in  
the SIM card for you to save the number and  
name. If the card memory is full, the first free  
location in the phone memory is displayed.  
34  
35  
04-A200-Phonebook 3/14/01 3:47 PM Page 36  
P h o n e Bo o k  
P h o n e Bo o k  
5. Press the right soft key to toggle between the  
Voice Record  
phone (To Phone) and card (To Card) memories.  
Note: This option appears only when no name has  
6. If you do not want to save the number and name  
been recorded.  
in the suggested location, press  
to clear the  
Allows you to add a voice tag to the number.  
location number and enter your preferred location  
by pressing the number keys.  
Follow the instructions given by your phone to record  
the required name.  
7. Press Ok to store the name and number.  
8. You can access the phonebook options by  
Play Voice  
pressing the Options soft key, or scroll through  
the memory with  
or  
.
Note: This option appears only when you have  
already recorded some names.  
To exit, press  
.
Plays back the names that you have recorded.  
Voice Delete  
Phonebook Options  
Note:This option appears only when you have  
When storing or viewing a number in the phonebook,  
Options appears above the left soft key to allow you  
to access the phonebook options, described in the  
following paragraphs.  
already recorded some names.  
Allows you to delete a specific voice entry.  
You are asked to confirm the deletion by pressing the  
Ok soft key.  
Accessing the Options  
Paste  
To access the various phonebook options, proceed as  
follows.  
Allows you to paste the phonebook number into the  
normal dialling mode. Use this option to dial a  
number similar to one in the phonebook (a different  
extension in the same office for example).  
Use the soft key to change the number as  
required (refer to page 22 for further details). When  
1. Press the Options soft key.  
The first available option is highlighted.  
2. Press the Select soft key to select the highlighted  
you are ready to dial, press  
.
option. Or, press  
one or more  
or  
key  
times until the required option is highlighted to  
highlight a differnt option.  
36  
37  
04-A200-Phonebook 3/14/01 3:47 PM Page 38  
P h o n e Bo o k  
P h o n e Bo o k  
Edit  
Searching for and Dialling a Number in  
the Phonebook  
Allows you to edit a number and name stored in the  
phonebook.  
1. When the idle screen is displayed, press the  
Erase  
Phonebook soft key.  
Allows you to erase a number and name stored in  
the phonebook. You are asked to confirm that you  
wish to erase the name and number from the  
phonebook by pressing the Yes soft key.  
2. If your SIM card provides with Service Dialling  
Number (SDN) and Information Numbers services,  
you will see the following screen.  
If your SIM card does not provide these services,  
go to step 3.  
Copy  
Allows you to copy a phonebook number to another  
location. Use this option to store a number similar to  
one already in memory; once copied, edit the number  
and store it into another location on the SIM card or  
in the phone memory.  
1. Find  
2. Service Dir.  
3.InformationNumbers  
Ok  
Memory Status  
You can check how many names and phone numbers  
are stored and how many locations are still free in  
the card memory and phone memory.  
Select Find pressing  
and press the Ok soft key.  
or  
if necessary  
Service Dir.: enables you to view the Service  
Directory and make calls from it.  
Alert  
Allows you to set a ringing tone on a number stored  
by the phone. You can select the required ringing  
tone from several tones. When this number calls you,  
the phone rings with this ringing tone.  
Information Numbers: enables you to see the  
Information Numbers in a tree structure and  
make a call with the number.  
Note: Service Dir. and Information Numbers  
options may not appear depending on your  
SIM card.  
38  
39  
04-A200-Phonebook 3/14/01 3:47 PM Page 40  
P h o n e Bo o k  
3. Enter the start of the name that you want to find  
and press the Find soft key.  
Note: You can also scroll through the phonebook  
from the beginning, by pressing the Find  
soft key directly.  
The phonebook entries are listed, starting with  
the first entry matching your input. This entry is  
also highlighted.  
4. To...  
View the  
Then press the...  
View soft key.  
highlighted entry  
Select a  
or  
key one or  
different entry  
more times until the  
required entry is  
highlighted.  
Look for a name  
starting with a  
different letter  
Key labelled with the  
required letter.  
5. Once you have found the required entry, press  
to dial the number.  
40  
05-A200-Text 3/14/01 3:46 PM Page 41  
Entering Text  
When storing a name in the Phone Book, creating  
your personal greeting or scheduling events in your  
calendar you will need to enter text into your phone.  
You are provided with the following text input  
modes;  
T9: This mode allows you to enter English words  
with only one key press per letter. Each key on  
a keypad has more than one letter - a single  
press on  
could be J,K or L. The  
T9(English) mode automatically compares your  
key presses to an internal linguistic database  
to determine the correct word. The T9(English)  
mode requires far fewer keystrokes than the  
traditional multi-tap method, ABC mode.  
ABC: This mode allows you to enter letters by  
pressing the key labelled with the desired  
letter once, twice, or three times until the  
letter appears on the display.  
Symbol: This mode allows you to enter special  
characters.  
Number: This mode allows you to enter numbers.  
is a registered Trademark of Tegic Communications, Inc.  
and is licensed under U.S. Patent 5,818,437/ 5,953,541/  
6,011,554  
41  
05-A200-Text 3/14/01 3:46 PM Page 42  
En t e rin g Te xt  
En t e rin g Te xt  
T9 Mode  
Changing Text Input Mode  
T9 predictive text input allows you to enter words  
easily with a minimum of key presses. As you press  
each key the phone selects a letter that makes up a  
word that it thinks you are trying to type, based on a  
built-in dictionary. As a new letter is added the word  
changes based on the key you have pressed.  
1. When you are in a field that allows characters  
entry, you should notice the text input mode  
indicator in the lower right corner of the display.  
1. When you are in the T9 predictive text input, start  
writing a word by using keys  
to  
Press  
each key only once for one letter.  
S a v e  
Text input mode  
indicator  
For example, to enter ‘hello’ in the T9 English  
mode, press and .  
,
,
2. The word you are typing appears in the display. It  
may change with each key you press.  
2. Press the right soft key. The modes available are  
displayed.  
3. Type to the end of the word before editing or  
deleting any keystrokes.  
3. Scroll to the desired mode, then press the Select  
soft key.  
4. Complete each word with a space by pressing  
5. If the word is correct, start writing the next word.  
.
If the word is not correct, press  
one or more  
times to display alternate word choices for the keys  
you have typed. (For example, ‘of’ and ‘me’ both  
shares the sequence  
,
The phone displays  
the most commonly used choice first.)  
To type words not found in the T9 mode, change the  
text input mode to the ABC mode.  
To delete a character, press  
to erase entire words.  
. Press and hold  
42  
43  
05-A200-Text 3/14/01 3:46 PM Page 44  
En t e rin g Te xt  
En t e rin g Te xt  
To insert a space, press  
There are three shift states: Lower Case (no shift  
indicator), Initial Cap ( indicator appears), and  
If you make a mistake, you can remove characters  
Caps Lock ( indicator appears). Press  
more times to display the appropriate shift  
indicator, and begin typing normally.  
one or  
to the left of the cursor by pressing  
times as necessary. Pressing and holding  
clears the screen.  
as many  
The cursor moves to the right when you press a  
different key. When entering the same letter twice  
(or a different letter on the same key) just wait for  
a few seconds for the cursor to move right  
Me e t m e a t  
S a v e  
ENG  
automatically, and then select the next letter.  
Shift indicator  
Note: If you want to exit the text input mode without  
saving your input, press . The phone goes  
back to the previous menu level.  
List of characters available:  
Key  
Characters in the order displayed  
Upper Case  
Lower Case  
? ! 1 -  
ABC Mode  
:
;
¿ ¡ 1 = “ /  
.
,
@
1
2
3
4
5
6
7
8
9
0
A B C 2 Ä Æ Å G  
D E F 3 É D  
G H I 4 Q  
a b c 2 à ä æ å Ç  
d e f 3 é è  
Use the keys labelled with letters (  
write with. Press once for the first labelled letter,  
twice for the second and three times for the third  
~
) to  
g h i 4 ì  
J K L 5 L  
j
k l  
5
etc. Pressing  
brings up a list of special  
M N O 6 Ñ Ö Ø X  
P Q R S 7 P S  
T U V 8 Ü F  
W X Y Z 9 YW  
0 x < > % # £  
m n o 6 ñ ò ö ø  
p q r s 7 ß  
characters. See the table on page 37 for more  
information on the characters available using the  
keys.  
t
u v 8 ù ü  
w x y z 9  
0 + ( & _ $  
)
There are three shift states: Lower Case (no shift  
indicator), Initial Cap ( indicator appears), and  
Caps Lock ( indicator appears). Press  
one  
or more times to display the appropriate shift  
indicator on the bottom of the display, and begin  
typing normally.  
44  
45  
05-A200-Text 3/14/01 3:46 PM Page 46  
En t e rin g Te xt  
Selecting Functions  
and Options  
Symbol Mode  
The Symbol Mode enables you to enter various  
symbols into a text message.  
Your phone offers a set of functions that allow  
you to customise your phone. These functions are  
arranged in menus and sub-menus, accessed via the  
two soft keys (  
menu allows you to view and alter the settings of a  
particular function.  
and  
). Each menu and sub-  
1 2 3 4 5 6 7 8 9  
. (  
)
,
:
; % !  
S a v e  
S YM  
The roles of the soft keys vary according to the  
current context; the label on the bottom line of the  
display just above each key indicates its current role.  
To scroll through the symbols available, press  
or (or the volume keys on the left side of  
the phone). Press number keys corresponding to the  
desired mark, then the phone automatically switches  
back to the text entry mode used just prior to  
selecting the SymbolMode.  
Example:  
<ServiceProvider>  
Feb 03 Saturday  
10:40  
oo
Number Mode  
The Number Mode enables you to enter numbers  
into a text message. Press keys corresponding to the  
desired digits, and manually switch back to the text  
entry mode of choice.  
Press the left soft key  
to access the Menu  
functions.  
Press the right soft  
key to access the  
Phonebook feature.  
46  
47  
06-A200-Selecting/Using 3/14/01 3:45 PM Page 48  
S e le c t in g Fu n c t io n s a n d Op t io n s  
S e le c t in g Fu n c t io n s a n d Op t io n s  
Example: Selecting a Ring Tone  
To view the various functions/options available and  
select the one required, proceed as follows.  
1. When the idle screen is displayed, press the  
Menu soft key to enter the menu facility.  
1. Press the appropriate soft key.  
2. To...  
Select the:  
Then press the...  
<ServiceProvider>  
Feb 03 Saturday  
10:40  
Left soft key.  
Function displayed  
or  
Menu PhoneBook  
Option highlighted  
2. Scroll through the menus until you reach the  
View the next function  
or highlight the next  
option in a list  
key.  
key.  
Tones menu, by pressing  
.
Move back to the  
previous function  
or option in a list  
Tones  
Select  
4
Move back up one  
level in the structure  
Right soft key.  
key.  
3. To select the Tones menu, press the Select soft  
key (or ).  
Exit the structure  
without changing  
the settings  
In some functions, you may be asked for a password  
or PIN. Enter the required code and press  
Ring Tone  
.
T o n e  
1
Select  
4.1  
48  
49  
06-A200-Selecting/Using 3/14/01 3:45 PM Page 50  
S e le c t in g Fu n c t io n s a n d Op t io n s  
Using the Menu  
4. If your SIM card provides with ALS(Alternate Line  
Service), the menus will be presented on the  
display as follows.  
The phone offers a range of functions that allows  
you to tailor the phone to your needs. These  
functions are arranged in menus and submenus.  
If your SIM card does not provide this services, go  
to step 5.  
The menus and submenus can be accessed by  
scrolling or by using the shortcuts.  
1 [ Lin e  
1
]
2
Line2  
Ok  
Accessing a Menu Function by Scrolling  
Select the required line and press the Ok soft key.  
1. In idle mode, press the Menu soft key to access  
5. To select the Ring Tone menu, press the Select  
the menu facility. Scroll with  
or  
to  
soft key (or  
). The current setting is  
reach the desired main menu, for example Tone.  
Press the Select soft key to enter the menu.  
highlighted within square brackets.  
2. If the menu contains any submenus: for example,  
Ring Tone, find the one you want by scrolling  
[
T o n e  
T o n e  
T o n e  
1
2
3
]
Current Tone  
or  
. Press the Select soft key to  
with  
enter the submenu.  
Select  
If the menu you have selected contains submenus,  
repeat this step.  
6. Scroll through the list of tones until the  
appropriate one is highlighted, by pressing  
3. Scroll with  
or  
to find the setting of your  
choice. Press the Ok soft key to confirm the  
chosen setting.  
or  
. You hear the corresponding ring tones as  
you scroll.  
Notes:  
You can return to the previous menu level by  
pressing the soft key.  
You can exit the menu without changing the menu  
settings by pressing  
7. Press the Select soft key to confirm your  
selection.  
.
8. Press the  
soft key twice to exit the menu  
structure or press  
.
50  
51  
06-A200-Selecting/Using 3/14/01 3:45 PM Page 52  
Us in g t h e Me n u  
Us in g t h e Me n u  
Accessing a Menu Function by Using its  
Shortcut  
List of Menu Functions  
The list shows the menu structure available and  
indicates the:  
Number assigned to each option  
Page on which you can find a description of each  
feature  
The menu items (menu, submenus and setting  
options) are numbered and can be accessed quickly  
by using their shortcut number.  
1. In idle mode, press the Menu soft key.  
Note: You can only see menu 0, if your SIM card  
supports SIM Application Toolkit. This is a  
network feature. Please contact your service  
provider for more information.  
2. Within three seconds, key in the first digit of the  
shortcut number. Repeat this for each digit of the  
shortcut number.  
Example: Setting the Any-key Answer function  
Press the Menu soft key, and key in  
,
,
Page 58  
1. Call Records  
,
.
1-1 Missed Calls  
1-2 Received Calls  
1-3 Dialled Calls  
1-4 Call Time  
Menu for entering the menu, 5 for Settings, 1 for  
Phone Settings, 4 for Any-key Answer menu  
function and 2 to set the Any-key Answer ON.  
1-4-1 Last Call Time  
1-4-2 Total Sent  
1-4-3 Total Received  
1-4-4 Reset Timers  
Note: The numbers assigned to each menu function  
are indicated on the list on page 53. They may  
not match the menu number on the phone. It  
depends on the services supported by the SIM.  
1
1-5 Call Cost  
1-5-1 Last Call Cost  
1-5-2 Total Cost  
1-5-3 Max Cost  
1-5-4 Reset Counters  
1-5-5 Set Max Cost  
1-5-6 Price/Unit  
1 Shown only if supported by your SIM card.  
52  
53  
06-A200-Selecting/Using 3/14/01 3:45 PM Page 54  
Us in g t h e Me n u  
Us in g t h e Me n u  
2. Messages  
4. Tones  
Page 61  
Page 74  
2-1 Voice Mail  
2-1-1 Connect to Voice Mail  
2-1-2 Voice Server Number  
2-2 Read Messages  
4-1 Ring Tone  
4-2 Melody Composer  
4-3 Ring Volume  
4-4 Alert Type  
2-3 Write Messages  
2-4 Preset Message List  
2-5 Setup  
4-5 Keypad Tone  
4-6 Message Tone  
4-7 Error Tone  
2-5-1 Service Centre  
2-5-2 Default Type  
2-5-3 Default Validity  
2-6 Broadcast  
4-8 Minute Minder  
4-9 Connect Tone  
5. Settings  
Page 80  
2-6-1 Read  
5-1 Phone Settings  
2-6-2 Receive  
2-6-3 Channel List  
2-6-4 Language  
5-1-1 Greeting Message  
5-1-2 Own Number 1  
5-1-3 Language  
5-1-3-1 Text Language  
5-1-3-2 Voice Language  
5-1-3-3 Input Mode  
5-1-4 Any-key Answer  
5-1-5 Backlight  
3. Voice Functions  
Page 68  
3-1 Voice Dial  
3-1-1 Record  
3-1-2 Act  
3-1-3 Delete One  
3-1-4 Play All  
3-1-5 Delete All  
5-1-6 Service Light  
5-1-7 Auto Redial  
5-1-8 Auto Answer  
5-1-9 Caller ID  
3-2 Voice Command  
3-2-1 Record  
3-2-2 Act  
3-2-3 Play All  
3-2-4 Delete All  
5-1-0 Active Folder  
5-1- Reset Settings  
*
5-1- Active Line 1  
#
5-2 Network Services  
5-2-1 Call Diverting 2  
5-2-2 Call Barring 2  
3-3 Voice Memo  
3-3-1 Record  
3-3-2 Replay  
5-2-3 Call Waiting 2  
3-3-3 Delete One  
3-3-4 Delete All  
3-4 AnswerPhone  
5-2-4 Network Selection  
5-2-5 Line Identification 2  
5-2-6 Closed User Group  
3-4-1 Answer Phone  
3-4-2 Message Record  
3-4-3 Message Select  
1 Shown only if supported by your SIM card.  
2 May not be shown or supported by your network service provider.  
54  
55  
06-A200-Selecting/Using 3/14/01 3:45 PM Page 56  
Us in g t h e Me n u  
Us in g t h e Me n u  
5. Settings (continued)  
5-3 Security Settings  
5-3-1 PIN Check  
7. Games  
Page 111  
Using this menu you can enjoy  
popular games with the phone.  
5-3-2 Change PIN  
5-3-3 Phone Lock  
5-3-4 Change Password  
5-3-5 SIM Lock  
1
Page 112  
5-3-6 FDN Mode  
8. WWW Services  
5-3-7 Change PIN2 1  
5-4 LCD Contrast  
The contents on the browser may  
vary depending on the service provider.  
5-5 Browser Settings 2  
5-5-1 Proxy Settings  
5-5-2 Current Proxy  
6. Organizer  
6-1 Scheduler  
6-2 Alarm  
Page 101  
6-3 Calculator  
6-4 To Do List  
6-5 Calendar  
6-6 World Time  
6-7 Clock  
6-7-1 Set Time  
6-7-2 Set Date  
6-7-3 Format  
1 Shown only if supported by your SIM card.  
2 May not be shown or supported by your network service provider.  
56  
57  
07-A200-Call/MSM 3/14/01 3:46 PM Page 58  
Ca ll Re c o rd s  
Call Records  
Dialled Calls  
Menu 1-3  
Via this menu, you can view the phone calls:  
Lets you view the last 10 numbers dialled.  
You can also:  
Edit the number and save it in the phonebook  
Redial the number  
Missed  
Received  
Dialled  
Delete the number from the list  
The number and name (if available) are displayed  
together with the date and time at which the call  
was made. You can also view call times and costs.  
Call Time  
Menu 1-4  
Missed Calls  
Menu 1-1  
Lets you view the timers for calls made and received.  
The following timers are available.  
Lets you view the last 10 unanswered calls. You can  
also:  
Last Call Time: length of the last call.  
Edit the number if available and dial it or save it  
in the phonebook  
Delete the number from the list  
Total Sent: total length of all calls made since the  
timer was last reset.  
Total Received: total length of all calls received  
since the timer was last reset.  
Received Calls  
Menu 1-2  
You can use the Reset Timers option to reset the  
call timers; you must first enter the phone password  
(see page 121) and then press the Ok soft key.  
Lets you view the last 10 phone calls received. You  
can also:  
Edit the number if available and dial it or save it  
in the phonebook  
Note: The actual time invoiced for calls by your  
service provider may vary, depending on  
network features, rounding-off for billing  
purposes, and so forth.  
Delete the number from the list  
58  
59  
07-A200-Call/MSM 3/14/01 3:46 PM Page 60  
Ca ll Re c o rd s  
Messages  
Call Cost  
Menu 1-5  
Your phone receives voice mail notification messages,  
and text messages. Voice mail and short message  
service (SMS) are network service. Please contact  
your service provider for more information.  
This network feature lets you view the cost of calls.  
The following options are available.  
Last Call Cost: cost of the last call made.  
When the  
messages. When the  
icon appears, you have received new  
icon appears, you have  
Total Cost: total cost of all calls made since the cost  
counter was last reset. If the total cost exceeds the  
maximum cost set via the Set Max Cost option, you  
will no longer be able to make any calls until you  
reset the counter(does not affect calls to the  
emergency services).  
received voice mail. If the message memory is full,  
an error message is displayed and you cannot  
receive any new messages. Use the Delete option in  
the Read Messages menu (2-2) to delete obsolete  
messages.  
Max Cost: maximum cost set via the Set Max  
Cost option (see below).  
Voice Mail  
Menu 2-1  
Reset Counters: option used to reset the cost  
counter; you must first enter your PIN2 (see page  
122) and then press the Ok soft key.  
This menu provides you with a quick way of  
accessing your voice mailbox (if provided by your  
network).  
Set Max Cost: option used to enter the maximum  
cost that you authorise for your calls.  
Connect to Voice Mail  
Price/Unit: option used to set the cost of one unit;  
this price per unit is applied when calculating the  
cost of your calls.  
Before using this feature, you must enter the voice  
server number obtained from your service provider  
(see the following page). You can then select this  
option and simply press the Ok soft key to listen to  
your messages.  
Note: If you press and hold  
when the phone is  
in idle mode, you can access your voice mail  
server directly.  
60  
61  
07-A200-Call/MSM 3/14/01 3:46 PM Page 62  
Me s s a g e s  
Me s s a g e s  
To scroll through the messages, press  
You can choose the following options, by pressing  
the Options soft key.  
or  
.
Voice Server Number  
You can change the voice mail server number.  
To...  
Then press the...  
Text Reply: allows you to reply by sending a text  
message. You can also:  
Change the SMS centre number (if required)  
• Send the message  
• Save and send the message  
• Save but not send the message  
Enter the server  
number  
Corresponding number  
keys.  
Recall a number in  
the phonebook  
PhoneBook soft key.  
Correct a digit  
soft key.  
Call back: allows you to call the sender back.  
Move the cursor  
or  
key.  
without clearing the digit  
Delete: allows you to delete obsolete messages.  
Cut Number: allows you to extract a number from  
the message text, so that you can call the number or  
save it in the phonebook.  
Note: See page 35 for instructions on how to use the  
phonebook.  
Send: allows you to send a message that you have  
not already sent.  
Read Messages  
Menu 2-2  
Send again: allows you to resend a message that  
you have already sent.  
When the Read Messages menu is selected, the  
header of the first message is displayed:  
Message number  
Note: The options available vary, depending on the  
message status (New/Old, Not sent, Sent).  
Message status (New, Old, Not sent, Sent)  
To view this message, press the View soft key. The  
screen shows the:  
• Sender’s phone number (if sent with the message)  
Date and time at which the message was  
received  
Message text  
62  
63  
07-A200-Call/MSM 3/14/01 3:46 PM Page 64  
Me s s a g e s  
Me s s a g e s  
Write Messages  
Menu 2-3  
Preset Message List  
Menu 2-4  
Within the Write Messages menu you can write  
and edit text messages of up to 160 characters.  
Using this menu, you can preset up to five messages  
that you use most frequently. This menu shows the  
preset message list. Scroll through the list using  
or  
. When the required message number  
1. In the Messages menu, scroll to the Write  
Messages and press the Select soft key.  
appears, press the Options soft key.  
The following options are available.  
2. Key in a message. For details on how to enter text,  
refer to page 41.  
Edit: allows you to write a new message or edit the  
selected preset message.  
3. After you complete the message, you can select  
the following options.  
Note: For further information on how to enter text in  
your message, refer to page 41.  
Send Only: allows you to:  
Enter the required destination  
Send Message: allows you to recall the selected  
preset message. Once you have completed the  
message, you can send, save and send, or simply save  
it.  
Enter or change the SMS centre number  
• Select the message format (Text, Voice, or Fax)  
• Set the time period for which the message is  
stored at the message centre while attempts  
are made to deliver it  
Delete: allows you to delete the selected preset  
message.  
Note: If you have set up the Setup menu (see page  
65), your phone only prompts you for the  
destination.  
Setup  
Menu 2-5  
Save and Send: allows you to save a copy of the  
message and then send the message to the  
required destination. You can read the message  
using the Read Messages option. ‘Sent’ is  
displayed when you read the message to indicate  
the message state.  
Via this menu, you can set up default information on  
the SMS feature.  
Service Centre: allows you to store or change the  
number of your SMS centre required when sending  
text messages. You must obtain this number from  
your service provider.  
Save Only: allows you to save the message so  
that it can be sent later. When you read the  
message, Not sent’ is displayed.  
64  
65  
07-A200-Call/MSM 3/14/01 3:46 PM Page 66  
Me s s a g e s  
Me s s a g e s  
Default Type: allows you to set the default message  
type (Text, Voice, Fax, X.400, Email, and ERMES). The  
network can convert the message into the selected  
format.  
The last five messages are also stored for later  
retrieval. Please contact your service provider for  
more information.  
The following options are available.  
Default Validity: allows you to set the default time  
period for which your messages are stored in the  
SMS centre while attempts are made to deliver  
them.  
Possible values are one hour, 6 hours, 24 hours, one  
week and the maximum authorised by your service  
provider.  
Read: lets you view the first message. Scroll through  
the message using  
or  
. At the end of the  
message, press the Next soft key to move to the  
next message.  
Receive: allows you to Enable or Disable the  
reception of broadcast messages.  
Channel List: lists all available channels. The  
Broadcast  
Menu 2-6  
channels currently selected are indicated by an  
asterisk ( ) beside the name. When you select one of  
*
them, you can edit, enable, disable or delete the  
channel.  
This network service allows you to receive text  
messages on various topics, such as the weather or  
traffic. Messages are displayed immediately they are  
received, provided that:  
The Enter Channel option allows you to add a new  
channel to the channel list. Enter the appropriate  
channel ID obtained from your service provider, and a  
title for the channel.  
The phone is in the idle mode  
The Receive option is set to Enable  
The message channel is currently active in the  
channel list  
Language: allows you to select your preferred  
language for the cell broadcast message display.  
If the message is long, press  
the phone one or more times.  
on the left side of  
66  
67  
08-A200-Voice/Tones 3/14/01 3:47 PM Page 68  
Vo ic e Fu n c t io n s  
Voice Functions  
Voice Dial Record  
You can use the Voice feature to customize various  
settings, such as the:  
Voice Dial  
Allows you to record name tags and allocate them to  
numbers for voice dialling.  
Voice Command  
Voice Memo  
AnswerPhone  
Say the name you want to use for voice dialling after  
you hear a voice prompt. For best results, use names  
with at least two syllables, or use both a first and  
last name. The phone stores the name as a “first”  
sample, and then prompts you to say the name  
again.  
Voice Dial  
Menu 3-1  
Respond to the prompt by repeating the name. The  
phone stores the name as a second sample and then  
requests the phone number.  
The voice dialling feature allows you to make phone  
calls by saying a voice tag that has been added to a  
desired name and phone number. Any spoken word, for  
example a name, can be a voice tag.  
To store the number, press the Ok soft key. Follow  
the instructions described on page 35 to complete  
storing number into your internal phonebook.  
Before using voice dialling, note that:  
Voice tags are not language dependent. They are  
dependent on the speakers voice.  
The voice tags are sensitive to background noise.  
Where possible, record voice tags or make calls in a  
quiet environment.  
When recording a voice tag or making a call, hold  
the phone in the normal position close to your ear.  
The maximum length for a voice tag recording is  
about 1.5 seconds, but very short names are not  
recorded  
Voice Dial Act  
This option activates voice dialling.  
You hear a voice prompt and Say Name is  
displayed. Say the voice tag clearly. If no match for  
the voice tag is found or recognized, the phone may  
ask you to try again. The phone automatically dials  
the number of the recognized voice tag.  
You can store up to twenty voice tags in the  
phone’s memory.  
Note: This option is only available once you have  
recorded voice tags.  
68  
69  
08-A200-Voice/Tones 3/14/01 3:47 PM Page 70  
Vo ic e Fu n c t io n s  
Vo ic e Fu n c t io n s  
Voice Command  
Menu 3-2  
Voice Dial Delete One  
Allows you to delete an individual voice tag. The  
corresponding phone number remains in the  
phonebook but the voice tag is deleted.  
This menu allows you to get a quick access to the  
frequently used menus by saying your own voice  
command.  
If the name displayed is... Then press the...  
You can select the following functions:  
To be deleted  
Ok soft key.  
Voice Command Record: The 20 most frequently  
used menu functions are programmable with your  
own voice commands. The menus are preset to OFF  
at the factory, indicating that they are not recorded.  
When voice commands are recorded successfully, the  
menus are changed to ON in the display.  
Not to be deleted  
or  
key.  
The next name is  
displayed.  
To exit the Voice Dial Delete One option, press the  
soft key.  
Voice Command Act: Use this menu to access the  
menu of the recorded voice commands.  
Voice Dial Play All  
Voice Command Play All: Plays all voice  
Allows you to play back all recorded voice tags.  
commands you have recorded.  
Voice Command Delete All : Deletes all  
commands you have recorded.  
Voice Dial Delete All  
Allows you to delete all voice tags. The  
corresponding phone numbers remain in the  
phonebook but the voice tags are all deleted. Press  
the Ok soft key when the message ‘Delete All  
confirm?’ is displayed.  
Voice Memo  
Menu 3-3  
You can use the Voice Memo feature to :  
Record up to 3 voice memos  
Play the recorded voice memos  
Delete one or all voice memos  
Otherwise, press the Cancel soft key to exit the  
function without deleting the voice tags.  
70  
71  
08-A200-Voice/Tones 3/14/01 3:47 PM Page 72  
Vo ic e Fu n c t io n s  
Vo ic e Fu n c t io n s  
AnswerPhone  
Menu 3-4  
Voice Memo Record: Allows you to record a  
memo. The screen displays the:  
Memo location  
Date and time when the memo was recorded  
Recording time counter  
You can set your phone to answer calls with your  
own recorded message.  
You can use the message to inform callers of your  
current situation and to guide them to leave  
messages in your voice mail.  
The maximum recording time is about 35 seconds.  
If you want to record for longer, press the Continue  
soft key. Split appears instead of Continue. You can  
continue recording and the rest of the memo is  
stored in the next memo location.  
While the message is being played, if you wish, you  
can take the call by pressing the Accept soft key.  
To stop recording, press the Stop soft key.  
The following options are available.  
Note: If all memo locations are full, you must delete  
an old memo before recording a new one.  
AnswerPhone: To turn off the AnswerPhone, select  
Disable, to turn on, select Enable.  
Voice Memo Replay: Allows you to play back all  
memos recorded, starting with the most recent  
memo. The screen displays the:  
Memo location  
Date and time when the memo was recorded.  
Message Record: You can record for up to 35  
seconds. To stop recording before the time is up,  
press the Stop soft key. To change the message, use  
the Delete option, and record a new one.  
To skip to the next memo, press the Skip soft key, to  
stop the playback, press the Stop soft key.  
Message Select: The phone offers two default  
messages, and one message of your own. You can  
select User Message only when you have recorded  
your own message.  
Voice Memo Delete One: Allows you to delete a  
specific memo. All memos recorded are played back,  
starting with the most recent one.  
Voice Memo Delete All: Allows you to delete all  
memos. Press the Ok soft key to confirm.  
72  
73  
08-A200-Voice/Tones 3/14/01 3:47 PM Page 74  
To n e s  
Tones  
Melody Composer  
Menu 4-2  
You can use the Tones menu to customise various  
sound settings, such as the:  
Ringing tone, volume and type  
Composing your own melody  
• Sounds made when you press a key, make an  
error or receive a message  
This menu allows you to compose your own,  
customised ringing tone.  
Three octaves are available.  
• A maximum of 100 notes can be entered.  
Adjustable length of note and note rest.  
To Compose Melody  
You can compose three melodies. When you access  
the menu, the melody name appears, if already  
created. Otherwise, Empty appears. Select Empty  
to create a new melody or select the melody’s name  
that you want to edit.  
Ring Tone  
Menu 4-1  
This option allows you to select the phones ringing  
tone. You can choose one between many different  
tones and each time you select a tone it is played for  
a few seconds.  
Use the following keys to compose a melody:  
: to enter C, the first note in the musical scale  
(doh).  
If your SIM card supports ALS, this option also allows  
you to select a different ring tone for each line. If you  
set a different ring tone for each line, you can  
distinguish between incoming calls.  
: to enter D (re).  
: to enter E (mi).  
: to enter F (fa).  
: to enter G (soh).  
: to enter A (la).  
: to enter B (ti).  
: to raise an octave higher or drop an octave  
lower.  
: Not available  
: to enter a note rest. Press  
the desired length of rest.  
until you find  
: to raise one semitone above the tone  
written. Example:If you want to enter a F  
sharp, press F (fa) then press  
.
74  
75  
08-A200-Voice/Tones 3/14/01 3:47 PM Page 76  
To n e s  
To n e s  
Ring Volume  
Menu 4-3  
: to delete notes.  
: to move a note to the next semitone  
higher position or lower position in the  
musical scale. For example, the note A  
moves A#, B, C, C# in the scale each time  
Allows you to adjust the ringing volume to one of  
seven levels. Use the volume keys on the left side of  
the phone or the  
or  
keys. The greater the  
number of bars, the greater the volume level.  
you press  
: to adjust a length of a note. Enter a note,  
then press . Notice that the note length  
.
Alert Type  
Menu 4-4  
changes each time you press the key.  
You can listen to your melody by pressing the Listen  
soft key. If you are satisfied, press the Yes soft key,  
and enter the melody name. For information on how  
to enter a name, refer to page 41.  
Allows you to indicate how you are informed of any  
incoming calls. The following options are available.  
Light only: only the backlight is switched on; the  
phone neither rings nor vibrates.  
Note: If you want to cancel your composing, press  
. The display goes back to the previous  
Melody: the phone rings using the ringing tone  
selected via menu option 4-1.  
menu level, the screen displaying Empty.  
After you save the melody, the display asks you if  
you want to set the melody as the ring tone. If you  
select Yes, your phone plays the melody each time  
your phone rings. If you select No, the melody is just  
saved and the phone returns to the idle mode.  
Vibration: the phone vibrates but does not ring.  
Vibra+Melody: the phone both rings and vibrates.  
Note:Pressing and holding down  
toggles  
between the current alert type and Vibration.  
To Delete a Selected Melody  
1. Select the melody you want to delete.  
2. Press and hold  
will be erased.  
for a few seconds. All notes  
3. Press the Listen soft key. The display asks you if  
you are sure you want to erase the melody. Select  
the Yes soft key.  
76  
77  
08-A200-Voice/Tones 3/14/01 3:47 PM Page 78  
To n e s  
To n e s  
Keypad Tone  
Menu 4-5  
Error Tone  
Menu 4-7  
Allows you to select the tone that the keypad  
generates when you press a key. The following  
options are available.  
Allows you to select how the phone informs you that  
you have made a mistake. The following options are  
available.  
OFF: the phone does not beep.  
OFF: the keys do not make any sound.  
ON: the phone beeps to indicate an invalid entry.  
Tone: each key, when pressed, makes a different  
sound.  
Beep: each key, when pressed, makes the same  
sound.  
Minute Minder  
Menu 4-8  
Allows you to specify whether the phone must beep  
every minute during an outgoing call to keep you  
informed of the length of your call. The following  
options are available.  
Message Tone  
Menu 4-6  
Allows you to select how the phone informs you that  
a new message has been received. The following  
options are available.  
OFF: the phone does not beep.  
ON: the phone beeps every minute.  
SMS Tone 1 ~ SMS Tone 10: the phone sounds the  
selected SMS tone.  
Single Beep: the phone beeps once.  
Connect Tone  
Menu 4-9  
Light Only: the service light on the top of the phone  
flashes.  
Allows you to specify whether the phone should  
beep when the phone connects to the network. The  
following options are available.  
OFF: the phone does not beep.  
ON: the phone beeps when your call is accepted.  
78  
79  
09-A200-Settings 3/14/01 3:45 PM Page 80  
S e t t in g s  
Settings  
Own Number  
Many different features of your phone can be  
customised to suit your preferences. All of these  
features are accessed via the Settings menu.  
Note: The contents of this menu may be different  
depending on the SIM card.  
You can enter your own name and number using this  
menu. If you have subscribed to the Alternative Line  
Service, you can select a line with  
or  
.
Phone Settings  
Menu 5-1  
The following options are available:  
Greeting Message  
Add: allows you to add name and number.  
Allows you to set a greeting message to be displayed  
briefly when the phone is switched on. The current  
message is displayed.  
Erase: allows you to erase name and number.  
Edit: allows you to edit name and number. If your  
SIM card supports ALS only the Edit soft key  
displays. Press the Edit soft key and you can  
setup or edit your own name for the ALS line.  
To...  
Then press the...  
Clear the existing message  
key and hold it  
down until the message  
is cleared.  
Language  
Enter a new message  
Appropriate  
alphanumeric keys.  
You can set a different setting for the text language  
and voice language. When the language option of  
your SIM card is set to Automatic, the language is  
automatically selected according to the language of  
the SIM card used.  
For more information on entering characters, refer to  
page 41.  
To go back to the previous menu level without saving  
your input, press  
.
You can also set the default text input mode. For  
details on the text input mode, refer to page 41.  
80  
81  
09-A200-Settings 3/14/01 3:45 PM Page 82  
S e t t in g s  
S e t t in g s  
Any-key Answer  
Service Light  
Depending on the setting of the Any-key Answer  
option, you can answer an incoming call by pressing  
Allows you to select whether or not the service light  
on the top of the phone is used. The following  
options are available.  
any key except  
To reject the call, press  
key.When the phone is closed, press  
and the Reject soft key.  
or the Reject soft  
or on the  
ON: the service light flashes when the phone is  
ready for use.  
left side of the phone to reject an incoming call. ( If  
the Any-key Answer menu option (5-1-4) is set to  
ON, just press, if its OFF press and hold the button.)  
OFF: the service light is not used.  
ON: you can press any key except  
and Reject.  
Auto Redial  
OFF: you can only press  
or Accept keys.  
With the Auto Redial function, the phone makes up  
to ten attempts to redial a phone number after an  
unsuccessful call.  
Backlight  
Note: The interval between two call attempts varies.  
You can select whether or not the phone uses the  
backlight. A marginal increase in standby/talk time  
can be achieved by turning the backlight off. The  
following options are available.  
The following options are available.  
ON: the number is redialled automatically.  
OFF: the number is not redialled.  
Short: the backlight comes on when you press a key  
or receive a call and switches off 10 seconds after  
the last key is pressed.  
Long: the backlight comes on when you press a key  
or receive a call and switches off 20 seconds after  
the last key is pressed.  
Auto Answer  
With the Auto Answer function, the phone auto-  
matically answers calls after 3, 5 or 10 seconds. You  
can also turn this feature off.  
OFF: the backlight is not used.  
Note: This feature is only available when the phone  
is connected to a car kit (optional).  
82  
83  
09-A200-Settings 3/14/01 3:45 PM Page 84  
S e t t in g s  
S e t t in g s  
Caller ID  
Reset Settings  
You can prevent your phone number from being  
displayed on the phone of the person being called.  
You can easily reset your phone to its default  
configuration. Before proceeding, you must enter the  
phones 4-digit password.  
Note: Some networks do not allow the user to  
change this setting.  
Note: The password is preset to 0000. To change this  
password, refer to page 97.  
The following options are available.  
Default: the default setting provided by the network  
is used.  
Active Line  
Some SIM cards may be used with two subscriber  
numbers (network service). This function is available  
only if your SIM card supports it.  
Hide Number: your number is not displayed on the  
other person’s phone.  
Send Number: your number is sent each time you  
make a call.  
This menu allows you to select the desired line for  
making calls. However, calls on both lines can be  
answered regardless of the selected line. When you  
select a line, the line number appears as an indicator  
after the operator/service provider’s names.  
Active Folder  
The voice dial and voice command mode can be  
activated automatically whenever the phone is  
opened.  
When you select the Manual option, you can choose  
a line whenever you are in call barring, diverting,  
waiting function, and there is no indicator to show  
the active line.  
The following options are available.  
OFF: the voice dial mode must be activated manually  
via the Voice Dial menu; for further information, refer  
to page 85.  
Voice Dial: the voice dial mode is activated when  
you open the phone.  
Voice Command: the voice command mode is  
activated when you open the phone.  
Note: When you use the earmicrophone and the  
Voice Dial or Voice Comand is set, you can  
use this function by pressing the button on the  
84  
85  
earmicrophone.  
09-A200-Settings 3/14/01 3:45 PM Page 86  
S e t t in g s  
S e t t in g s  
You can specify individual diverting options for each  
of the following call types:  
Network Services  
Menu 5-2  
Voice calls only  
Fax calls only ; not available when a Line 2 is in  
These menu functions are network services.  
Please contact your service provider to check their  
availability and subscribe to them, if you so wish.  
use  
Data calls only ; not available when a Line 2 is in  
use.  
Example: You can:  
Call Diverting  
• Systematically divert fax calls to your  
office fax machine  
Divert voice calls to your colleague if you  
are already using the phone  
Note: The call divert options that are not supported  
by your network operator may not be shown.  
This network service enables incoming calls to be  
rerouted to the number that you specify.  
Example: You may wish to divert your business calls  
to a colleague while you are on holiday.  
To set your call diverting options, proceed as follows.  
1. Select the type of call diverting required by  
pressing  
or  
until the appropriate option  
Call diverting can be set up in the following ways.  
is highlighted, and then press Select.  
Divert Always: all calls are diverted.  
2. Select the type of calls to be diverted by pressing  
Busy: calls are diverted if your phone is engaged on  
or  
until the appropriate option is  
another call.  
highlighted and then press Select.  
No Reply: calls are diverted if you do not answer  
the phone.  
3. Press the Activate soft key to confirm your settings.  
4. You can enter the number of your choice.  
Unreachable: calls are diverted if you are not in an  
area covered by your service provider.  
To enter the international code, press  
until  
the + sign is displayed. You can also select a  
number in the phonebook or the voice server  
number, by pressing the Options soft key,  
followed by PhoneBook or Voice Server  
Number.  
Unavailable: Calls are diverted if you are busy. No  
replay, unreachable.  
Cancel All: all call diverting options are cancelled.  
Note: These options may be different depending on  
When you are satisfied, press the Send or Ok  
soft key; the phone sends your setting to the  
network and the networks acknowledgement is  
displayed.  
the SIM card.  
86  
87  
09-A200-Settings 3/14/01 3:45 PM Page 88  
S e t t in g s  
S e t t in g s  
Call Barring  
To deactivate specific call diverting settings, proceed  
as follows.  
The call barring network service allows you to  
restrict your calls.  
1. Select the call diverting option to be deactivated.  
2. Select the type of call to which this option applies.  
3. Press the Remove soft key.  
Call barring can be set up in the following ways.  
All outgoing: calls cannot be made.  
International: international calls cannot be made.  
The phone sends your settings to the network and  
the network’s acknowledgement is displayed.  
International except to home: when abroad, calls  
can be made only to numbers within the current  
country and to your home country, that is the country  
where your home network provider is located.  
You can also deactivate all call diverting settings by  
selecting the Cancel All option.  
All Incoming: calls cannot be received.  
Note: When the Divert Always is activated the divert  
Incoming while abroad: calls cannot be received  
when you are using your phone outside your home  
service area.  
icon(  
) is displayed on the last line of the  
display.  
Cancel All: all call barring settings are deactivated;  
calls can be made and received normally.  
To set your call barring options, proceed as follows.  
1. Select the type of call barring required by  
pressing  
or  
until the appropriate option  
is highlighted and then press Select.  
2. Select the type of calls to be barred by pressing  
or  
until the appropriate option is  
highlighted and then press Select.  
3. Press the Activate soft key to confirm your  
settings.  
88  
89  
09-A200-Settings 3/14/01 3:45 PM Page 90  
S e t t in g s  
S e t t in g s  
Call Waiting  
4. Enter your call barring password supplied by your  
service provider.  
This network service enables you to be informed  
when someone is trying to reach you during another  
call.  
The phone sends your settings to the network and  
the network’s acknowledgement is displayed.  
To set your call waiting options, proceed as follows.  
1. Select the type of calls to which the call waiting  
To deactivate specific call barring settings, proceed  
as follows.  
option is to be applied by pressing  
until the appropriate option is highlighted and  
then press Select.  
or  
1. Select the call barring option to be deactivated.  
2. Select the type of call to which this option applies.  
3. Press the Remove soft key.  
2. Press the Activate soft key to confirm your  
settings.  
4. Enter your call barring password supplied by your  
service provider.  
The phone sends your settings to the network and  
the network’s acknowledgement is displayed.  
The phone sends your settings to the network and  
the network’s acknowledgement is displayed.  
To deactivate specific call waiting settings, proceed  
as follows.  
You can also deactivate all call barring settings by  
selecting the Cancel All option.  
1. Select the type of call to which the option applies.  
2. Press the Deactivate soft key.  
Change Barring Password: you can set and  
change the call barring password obtained from your  
service provider using this option. You must enter the  
current password before you can specify a new one.  
The phone sends your settings to the network and  
the network’s acknowledgement is displayed.  
You can also deactivate all call waiting settings by  
selecting the Cancel All option.  
Once you have entered a new password, you are  
asked to confirm it by entering it again.  
90  
91  
09-A200-Settings 3/14/01 3:45 PM Page 92  
S e t t in g s  
S e t t in g s  
Preferred List: allows you to list your preferred  
Network Selection  
networks to be used when roaming. Your phone uses  
the networks in order of appearance in this list,  
provided that the network is available.  
The Network Selection feature enables you to:  
Indicate whether the network used when roaming  
(outside your home area) is selected automatically  
or manually  
• Set up a preferred list to be used when selecting  
a network automatically  
When you select this option, the current preferred  
list is displayed if it already exists (see the procedure  
below). Otherwise, the list of available networks is  
displayed directly (see Step 2).  
Note: You can select a network other than your  
home network only if it has a valid roaming  
agreement with your home network.  
1. To...  
Scroll through  
Then press the...  
or  
key.  
To indicate whether the network is selected  
automatically or manually when roaming, proceed as  
follows.  
the preferred list  
Change an entry in  
the preferred list  
or  
key to  
highlight the required entry,  
followed by the Edit soft  
key.  
1. When Network Select is displayed, press the  
Select soft key.  
2. Press  
or  
until the appropriate option is  
2. Select the network to be added to the list by  
pressing or until it is highlighted,  
followed by Select.  
highlighted and press Ok.  
If you select Automatic, you are connected to the  
first available network in the preferred list when  
roaming.  
The network is added to the list.  
If you select Manual, the phone scans for the  
available networks. Go to Step 3.  
3. Press  
or  
until the preferred network is  
highlighted and press Ok.  
You are connected to that network when roaming.  
92  
93  
09-A200-Settings 3/14/01 3:45 PM Page 94  
S e t t in g s  
S e t t in g s  
Deactivate: deactivates the CUG function.  
Line Identification  
This menu option lets you view the following line  
identification settings.  
Index List: lets you list, add or delete CUG index  
numbers. The list of current CUG indexes appears.  
Add a new CUG index (as advised by your service  
provider) or delete a selected group.  
CLIP (Calling Line Identification Presentation) /  
COLP (Connected Line Identification Presentation)  
If these network functions are active, the callers  
number is displayed during a call. If the phone  
number matches one stored in the phonebook, the  
caller’s name is also displayed.  
To...  
Then press the...  
or key.  
Scroll through the  
existing CUG indexes  
Add a new CUG index Options soft key, select  
CLIR (Calling Line Identification Restriction) /  
COLR (Connected Line Identification Restriction)  
If these network functions are active, your phone  
number is not displayed on the other partys phone.  
Add and enter the index.  
Delete a CUG index  
or  
key to select the  
index you want to delete,  
press the Options soft key  
and select Delete.  
Closed User Group (CUG)  
This network service allows incoming and outgoing  
calls to be restricted to a selected user group. You  
may be a member of up to 10 user groups.  
For details on how to create, activate and use a  
closed user group, contact your service provider.  
Outside Access: enables you to allow or prohibit  
calls to numbers other than those nominated for the  
Closed User Group. This feature depends on the  
nature of your CUG subscription. Please check with  
your service provider.  
Example: A company lends SIM cards to its employees  
and wants to restrict outgoing calls to  
members of the same team.  
Default Group: you may communicate a default  
CUG to your service provider. If you have done so,  
you can enable the Default Group option on your  
phone. When making a call, you will be given the  
option of using your default CUG, instead of  
selecting one from the list.  
Activating a Closed User Group  
If you select the Closed User Group menu, you are  
asked if you want to activate the CUG function. Press  
the Yes soft key. You can now access the following  
options.  
94  
95  
09-A200-Settings 3/14/01 3:45 PM Page 96  
S e t t in g s  
S e t t in g s  
Security Settings  
Menu 5-3  
Change PIN  
This feature allows you to change your current PIN  
toa new one, provided that the PIN Check feature is  
enabled. You must enter the current PIN before you  
can specify a new one.  
The Security feature enables you to restrict the use  
of your phone to:  
The people of your choice  
The types of calls of your choice  
Once you have entered a new PIN, you are asked to  
confirm it by entering it again.  
Various codes and passwords are used to protect the  
features of your phone. They are described in the  
following sections (also see page 121).  
Phone Lock  
When the Phone Lock feature is enabled, the phone  
is locked and you must enter the 4-digit phone  
password each time the phone is switched on.  
PIN Check  
When the PIN Check feature is enabled, you must  
enter your PIN each time you switch the phone on.  
Any person who does not have your PIN cannot,  
therefore, use your phone without your approval.  
The password is factory set to 0000. To change the  
phone password, refer to menu option 5-3-4.  
Once the correct password has been entered, you  
can use the phone until you switch it off.  
Note: Before disabling the PIN Check feature, you  
must enter your PIN.  
The following options are available.  
To change your PIN, refer to menu option 5-3-2  
opposite.  
Enable: you are required to enter the phone  
password when you switch the phone on.  
The following options are available.  
Disable: you are not asked to enter the phone  
password when you switch the phone on.  
Enable: you must enter the PIN each time the phone  
is switched on.  
Change Password  
Disable: the phone connects directly to the network  
when you switch it on.  
The Change Password feature allows you to change  
your current phone password to a new one. You must  
enter the current password before you can specify a  
new one.  
The password is factory set to 0000. Once you have  
entered a new password, you are asked to confirm it  
by entering it again.  
96  
97  
09-A200-Settings 3/14/01 3:45 PM Page 98  
S e t t in g s  
S e t t in g s  
SIM Lock  
LCD Contrast  
Menu 5-4  
When the SIM Lock feature is enabled, your phone  
only works with the current SIM. You must enter the  
SIM lock code.  
The LCD contrast menu enables you to adjust the  
contrast of the main LCD screen.  
Once you have entered the lock code, you are asked to  
confirm it by entering it again.  
Press  
contrast.  
to increase or  
to decrease the  
To unlock the SIM, you must enter the SIM lock code.  
FDN Mode  
The FDN(Fixed Dial Number) mode, if supported by  
your SIM card, allows you to restrict your outgoing  
calls to a limited set of phone numbers.  
The following options are available.  
Enable: you can only call phone numbers stored in the  
phonebook. You must enter your PIN2.  
Disable: you can phone any number.  
Note: Not all SIM cards have a PIN2. If your SIM card  
does not, this menu option is not displayed.  
To change your PIN2, refer to menu option 5-3-7  
below.  
Change PIN2  
The Change PIN2 feature allows you to change your  
current PIN2 to a new one. You must enter the current  
PIN2 before you can specify a new one.  
Once you have entered a new PIN2, you are asked to  
confirm it by entering it again.  
Note: Not all SIM cards have a PIN2. If your SIM card  
does not, this menu option is not displayed.  
98  
99  
09-A200-Settings 3/14/01 3:45 PM Page 100  
S e t t in g s  
Organizer  
Browser Settings  
Menu 5-5  
Note: This menu may not be shown depending  
The Organizer feature enables you to:  
Write your schedule or to do list  
Calculate  
on your network service provider.  
You can setup several proxies using the Proxy  
Settings menu (5-5-1), and you can choose one of  
those for a current proxy using the Current Proxy  
menu (5-5-2). Each proxy has following information.  
These may vary depending on your service provider.  
Contact the service provider for details.  
Check the calendar  
• Set the current date and time  
Set the alarm so that the phone rings at a specific  
time (to remind you of an appointment for example)  
Find out what time it is in various cities around  
the world  
Proxy Name: To view or edit the name of proxy.  
Scheduler  
Menu 6-1  
WDP Address: To view or edit the WDP address.  
The Scheduler helps you to keep track of reminders,  
calls that you need to make, meetings, and birthdays.  
The phone sounds an alarm tone when the set date  
for a birthday, reminder or a call is reached.  
Port Number: To view or edit the number of the port  
to be used for connecting the gateway.  
Home URL: To view or edit the URL of your home.  
Note: Your phone must be switched on to use this  
Access Point : To view or edit the following settings.  
function.  
When you access the Scheduler menu, the  
following options are available:  
NAS Phone Number: You can set the number of the  
PPP server.  
Login Name: You can set the login name of the PPP  
server. You can ignore it, if it’s not necessary.  
Go to date: allows you to enter a particular date and  
to make a schedule on that date.  
View All: shows the schedules you have made.  
Password: You can set the password of the PPP  
server. You can ignore it, if it’s not necessary.  
Delete All: deletes all the schedules you have  
made.  
Network Type: You can select one of network types  
among V.32 Transparent, V.32 Non-Transparent, V.110  
Transparent and V.110 Non-Transparent.  
100  
101  
10-A200-Organizer 3/14/01 3:47 PM Page 102  
Org a n iz e r  
Org a n iz e r  
A date when a schedule has already been created  
appears in bold. If you select a date when a schedule  
has already been created you will see the contents.  
To create a new schedule, proceed as follows.  
1. When a calendar screen appears, select the month  
by using the volume key on the left side of the  
Note:If you have created more than two schedules  
phone, select the week by using  
select the day by using and  
or  
, and  
for a day, you can scroll to the desired  
. You can  
schedule by pressing  
or  
.
also use the Go to date menu option to specify  
the date.  
The following options are available:  
Note: If you want to cancel your selection in the  
Add: allows you to add new contents. For details on  
entering text, see page 41.  
Delete: deletes the schedule.  
Calendar screen, press  
. The phone goes  
back to the previous menu level.  
Move: moves the schedule to a new date of your  
choice.  
Copy: copies the schedule to a new date of your  
choice.  
2. When you press the Ok soft key, you can select a  
schedule type. Four types are available:  
Reminder: requires contents and a time.  
Call: requires a phone number and a time.  
Meeting: requires contents and a time.  
Birthday: requires a name and a time.  
Delete Day: deletes schedules on the date.  
Alarm  
Menu 6-2  
3. Enter the content of the schedule. For details on  
how to enter text, refer to page 41.  
This option allows you to set the alarm to ring at a  
specific time. The following alarms are available. You  
can set one or more alarms.  
4. If you want to set the alarm on the scheduled date  
and time, select Yes when the phone asks you to  
set the alarm and specify the alarm time.  
Daily Alarm: the alarm rings (at the same time)  
every day.  
If you select No, the phone just saves the  
Once Alarm: the alarm rings only once and is then  
schedule and returns to idle mode.  
deactivated.  
Weekly Alarm: the alarm rings every week on the  
same day and at the same time.  
Alarm Tone: allows you to select a specific tone for  
the alarm ringer.  
102  
103  
10-A200-Organizer 3/14/01 3:47 PM Page 104  
Org a n iz e r  
Org a n iz e r  
Calculator  
Menu 6-3  
To set the alarm, proceed as follows.  
1. Select an alarm type by pressing the Select soft  
key.  
You can use the phone as a 9-digit calculator. The  
calculator performs basic mathematical functions;  
addition, subtraction, multiplication, division.  
Percentage operation is also available.  
2. Set Alarm option allows you to set the alarm time  
or days of the week.  
To use the calculator, proceed as follows.  
1. To start calculating, press the Ok soft key.  
2. Enter the first figure using the number keys.  
If you choose Weekly Alarm, select the required  
day of the week and press  
appears to indicate that the day is selected. Repeat  
as necessary.  
To remove it, press  
. The symbol  
*
.
You can set more than one day.  
3. Press the Operator soft key until you find the  
desired mathematical symbol; + (add), - (subtract),  
x (multiply), / (divide).  
3. Press the Ok soft key.  
4. Enter the required time, then press the Ok soft key.  
4. Enter the second figure.  
Alarm Activated is displayed.  
5. Repeat Steps 2 and 3 if necessary.  
Once an alarm has been set, you can see the alarm  
icon ( ) in the top of the display. To stop the alarm  
when it rings, open the phone and press any key.  
6. To get the result, press the Equal soft key or  
.
To fix an entry mistake or clear the display, use  
.
To deactivate the alarm, select Remove Alarm.  
To use a decimal point, press  
two decimal places.  
. It calculates to  
Note: If no battery is attached to the phone when the  
alarm is to ring or the battery is discharged, the  
alarm does not ring. A daily or weekly alarm,  
however, remains activated and will ring when  
next triggered, provided that the phone is  
powered by a battery.  
104  
105  
10-A200-Organizer 3/14/01 3:47 PM Page 106  
Org a n iz e r  
Org a n iz e r  
To Do List  
Menu 6-4  
Examples:  
This menu allows you to write a job list with  
priorities and deadlines and also sort the jobs  
according to their priority type or their status. If you  
don’t have any items in the list, proceed as follows  
to make your to do list.  
Expression  
12*3+5=  
Key operation  
Result  
41  
12x3+5  
34+57  
45  
(or  
(or  
(or  
(or  
(or  
(or  
(or  
(or  
(or  
)
34+57=  
)
91  
45+57=  
)
)
)
102  
25  
1. press the New soft key to input a new item.  
48-23=  
48-23  
14  
14-23=  
-9  
2. Input your details.  
For information on how to enter characters, see  
page 41.  
68*25=  
68x25  
40  
)
1700  
2720  
2.5  
7
68*40=  
)
35/14=  
35/14  
98  
)
3. Press the Ok soft key.  
98/14=  
)
10% of 200  
10=? % of 100  
200x10  
10/100  
20  
4. Select the priority type using the Select soft key.  
(1 or 2)  
10  
10% premium of 200 200+10  
10% discount of 200 200-10  
220  
180  
16  
5. Input deadline.  
6. Press the Yes soft key.  
square of 4  
4x  
8/  
(or  
(or  
)
reciprocal of 8  
)
0.12  
If you have any other items in the list, you can see  
the list in the display with a mark box, priority level  
and job details.  
( : left soft key)  
Note: When you have finished with the calculator,  
press to exit the calculator and return to the  
previous menu level.  
To see the detailed contents of an item, press the  
View soft key. In this view, if you press  
, a  
mark box, created date and time will be displayed.  
To mark your item, press  
. The key toggles  
between marking and unmarking the viewed job.  
106  
107  
10-A200-Organizer 3/14/01 3:47 PM Page 108  
Org a n iz e r  
Org a n iz e r  
World Time  
Menu 6-6  
You can choose the following options, by pressing  
the Options soft key.  
You can use your phone to check the current time in  
21 major cities around the world. Scroll through the  
New : allows you to write new item.  
Mark : allows you to mark an item or job.  
Edit : allows you to edit your item’s details.  
cities using  
or  
.
The screen shows the:  
City name  
Current date and time  
Sort : allows you to sort according to priority 1,  
priority 2, or marking status.  
Time difference between the selected city and your  
city if you have set the local time (see below for  
further details) or GMT (by default)  
Copy : copies one item to another.  
Delete : deletes the item.  
To select the time zone in which you are located,  
proceed as follows.  
Delete All : deletes all items.  
1. Select the city corresponding to your time zone by  
pressing  
or  
one or more times.  
Calendar  
Menu 6-5  
The local date and time are displayed.  
You can view calendars of 1900 through to 2099.  
You can also view some information on the bottom-  
right of the display. The form of the information looks  
like this– 69:11:296. These numbers represent the  
number of days passed, the number of weeks  
passed, and the number of days left in this year.  
2. Press the Set soft key.  
3. To...  
Update the current  
Then press the...  
Set Local soft key.  
date/time with this  
new setting  
Use  
to a previous day.  
Use or  
or  
to move to the next day or back  
Indicate that the  
time zone is currently A check mark is shown  
using the daylight  
saving time  
Set DST soft key.  
to move to the next week or  
next to the time  
difference.  
back to a previous week.  
Use the volume key on the left side of the phone  
to move to the next or previous month.  
Indicate that the  
time zone is no longer (only available when the  
Remove DST soft key  
using the daylight  
saving time  
check mark is shown  
next to the time  
difference).  
You can see another date by selecting the Goto  
softkey.  
108  
109  
10-A200-Organizer 3/14/01 3:47 PM Page 110  
Org a n iz e r  
Games  
Clock  
Menu 6-7  
Using this menu you can also enjoy popular games  
on the phone.  
Set Time  
Allows you to change the time displayed, using the  
24-hour system.  
1. Scroll to the desired game and press the Select  
soft key.  
Note: Before setting the time, you must specify your  
time zone, via the World Time menu option (6-6).  
2. The following options are available.  
Play: allows you to start a game.  
Set Date  
Allows you to change the date displayed. Enter the  
day, month and year.  
Level: appears when it is needed. It allows you to  
select the level. Select the desired level with  
or  
Format  
and press the Ok soft key.  
Allows you to select the format of date between  
DD/MM/YYYY and MM/DD/YYYY.  
Configuration: allows you to set phone  
configuration, such as backlight and sound.  
To adjust each setting, highlight the Backlight or  
Sound option by pressing  
or  
key and then  
toggle between on and off by pressing the On/Off  
soft key.  
Instructions: shows you a help text for the game.  
You can scroll up or down with  
or  
.
High Score: shows you the game’s high score list.  
While playing a game, to exit and go up a menu,  
press  
.
When you have finished the game, if you have  
recorded a high score, the phone will display the  
high score screen.  
110  
111  
10-A200-Organizer 3/14/01 3:47 PM Page 112  
WWW S e rv ic e s  
WWW Services  
Navigating the Browser  
You can use your phone as a web browser.  
You can obtain up to date news, weather, sport, and  
other information as well as use e-mail and other  
Internet services.  
You can navigate the Internet with phone keys and  
the Browser Menu.  
Using the Phone Keys  
Please contact your service provider to open your  
Internet account. You must have entered your Own  
Number (5-1-2) information correctly in order to use  
wireless web services.  
When navigating the Internet, the phone keys  
functions differently from the phone mode.  
To...  
Then press...  
Scroll each line of  
content area  
or  
Launching the Browser  
To launch the browser, from the idle mode, press  
Move back to the  
previous page  
(except on the  
homepage)  
or press Menu soft key and then  
.
Move to the opening  
homepage  
And hold  
anywhere  
Once connected, the Home page (or the last page  
visited) will be displayed. What appears on the  
display when accessing the Web browser is  
dependent on the service provider content.  
Using the Browser Menus  
There are various menus available when navigating  
the wireless web.  
Exiting the Browser  
Press  
to exit the browser at any time, then the  
To access the Browser Menu:  
idle screen will be displayed.  
1. Press  
. A list of menus will appear.  
or  
2. Find the desired menu using  
.
3. Press the OK soft key to enter the selected menu.  
4. If necessary, select the secondary option using  
or  
, and press the OK soft key to enter the  
option.  
112  
113  
10-A200-Organizer 3/14/01 3:47 PM Page 114  
WWW S e rv ic e s  
WWW S e rv ic e s  
Note: The browser menus may vary depending on  
your version of the browser.  
Entering Text, Numbers, or Symbols  
When you are prompted to enter text, the current  
text entry method will appear on the left soft key as  
abc/Abc/ABC, Num or SYM 1 ~ 4. To change the  
input mode, use the left soft key until the desired  
mode is displayed.  
The following menus are available:  
Reload: reloads the current site.  
Home: takes you back to the homepage of the  
wireless web provider at any time.  
abc/Abc/ABC: enters lower case and upper case  
Bookmarks: shows the list and allows you to go to  
letters. You can change modes by pressing  
.
the page you want.  
SYM1 ~ 4: enters the various symbols and  
punctuation. Press the More soft key to see more  
Mark Site: adds the current site to your bookmark.  
tables.  
About Phone.com: shows the version of the  
Num: enters numbers.  
browser.  
Advanced...: offers you more menus to use the  
browser. Some menus are not supported by your  
network operator.  
If you want to edit text, move the cursor using  
(left),  
to the desired position and clear the wrong letter by  
pressing . Then enter the correct letter.  
(right),  
(up), or  
(down) keys  
Show URL: shows the URL of the current page.  
HomePage: moves to the homepage.  
Network Connecting Information  
Set UP.Link: sets a UP.Link which you want.  
If you want to check the network connection time,  
Offline Services: allows you to copy and save web  
pages that will allow you to view them, even if the  
network is down.  
press and hold  
. You can see the connection  
time in the last line of the content area.  
The linger time is one or more minutes (It depends on  
your service provider). That means, if you don't use  
the browser for one or more minutes, the network is  
disconnected automatically. In this case you can see  
that the connection time was stopped at that point.  
The connection time will reset whenever you exit the  
browser.  
Outbox: stores outgoing requests from the browser  
for later processing.  
Restart Up. Browser: clears the cache memory and  
moves to the homepage.  
Encryption: allows you to verify and generate the  
security key to contact a server.  
114  
115  
11-A200-Additional 3/14/01 3:47 PM Page 116  
Ad d it io n a l S e rv ic e s  
Additional Services  
3. Setting the Ring Type  
ALS(Alternate Line Service)  
To distinguish between incoming calls on the two  
lines, you can select a different ring type for each line  
with the Ring Tone Menu (4-1).  
Note: Please contact your service provider to check  
the availability and how to subscribe to ALS.  
The ALS feature enables two lines to be associated  
with one SIM card. Consequently, you can make and  
receive calls on either line as required. If you  
subscribe to this network service, a few additional  
menu options enable you to set up this feature.  
4. Setting Call Diverting Options  
You can set up call diverting with Call Diverting  
Menu (5-2-1). This service enables incoming calls of  
the line which you want to reroute to the number  
that you specify. Please see page 86 for further  
details.  
1. Selecting a Line  
You can set a line for use, or manually for each call  
with the Active Line Menu (5-1-#).  
For further details, refer to page 101.  
2. Editing the Line Name  
You can edit the name of each line with the Own  
Number Menu (5-1-2).  
When you edit the name of a line, you can see the  
name in every menu string which are shown as “Line  
1” or “Line 2”. For further details, refer to page 81.  
116  
117  
11-A200-Additional 3/14/01 3:47 PM Page 118  
S o lv in g P ro b le m s  
Solving Problems  
No service” is displayed  
The network connection was lost. You may be in a  
weak reception area (in a tunnel or surrounded by  
buildings). Move and try again.  
Before contacting after-sales service, perform the  
following simple checks. They may save you the time  
and expense of an unnecessary service call.  
You are trying to access an option for which you  
have not taken out a subscription with your  
service provider. Contact the service provider for  
further details.  
When you switch your phone on, the following  
messages appear  
Insert SIM Card  
Check that the SIM card is correctly installed.  
You have entered a number but it was not dialled  
Have you pressed  
?
Phone Locked  
Are you accessing the right cellular network?  
You may have set an outgoing call barring option.  
The automatic locking function has been enabled.  
You must enter the phone’s password before you  
can use the phone.  
Your correspondent cannot reach you  
Enter PIN  
You are using your phone for the first time. You  
must enter the Personal Identification Number  
supplied with the SIM card.  
The option requiring that the PIN be entered each  
time the phone is switched on was enabled. You  
must enter your PIN and then disable this option if  
so required.  
Is your phone switched on (  
than one second)?  
Are you accessing the right cellular network?  
You may have set an incoming call barring option.  
pressed for more  
Your correspondent cannot hear you speaking  
Enter PUK  
Have you switched off the microphone (Mute  
appears)?  
Are you holding the phone close enough to your  
mouth? The microphone is located in the bottom  
centre of the phone.  
The PIN code was entered wrongly three times in  
succession and the phone is now blocked. Enter  
the PUK supplied by your network operator.  
118  
119  
11-A200-Additional 3/14/01 3:47 PM Page 120  
S o lv in g P ro b le m s  
Reference Information  
The phone starts beeping and “**Warning**  
Battery Low” flashes in the display  
Access Codes  
The battery is insufficiently charged. Replace the  
battery and recharge it.  
There are several access codes that are used by your  
phone and its SIM card. These codes help you protect  
the phone against unauthorised use.  
The audio quality of the call is poor  
The access codes (except for the PUK and PUK2 codes)  
can be changed using the Security Settings menu (5-3)  
options. See page 96 for further details.  
Check the signal strength indicator in the display  
( ); the number of bars after it indicates the  
signal strength from strong (  
) to weak ( ).  
Try moving the phone slightly or moving closer to  
a window if you are in a building.  
Phone Password  
This security code can be used to avoid unauthorised  
use of the phone. The security code 0000 is the factory  
default setting but you are advised to change the  
security code before you start using your phone. Keep  
the new code secret and in a safe place, which is  
separate from the phone.  
No number is dialled when you recall a  
phonebook entry  
Check that the numbers have been stored  
correctly, by using the Phonebook Search feature.  
Re-store them, if necessary.  
If you key in an incorrect security code five times in  
succession, the phone will not accept the correct code  
for the next five minutes.  
If the above guidelines do not enable you to solve  
the problem, take a note of:  
The model and serial numbers of your phone  
Your warranty details  
• A clear description of the problem  
Then contact your local dealer or SAMSUNG  
after-sales service.  
120  
121  
11-A200-Additional 3/14/01 3:47 PM Page 122  
Re f e re n c e In f o rm a t io n  
Re f e re n c e In f o rm a t io n  
PIN code  
PUK code  
The PIN (Personal Identification Number) code  
protects your SIM card against unauthorised use. The  
PIN code is usually supplied with the SIM card.  
When the PIN code request is enabled (Menu 5-3-  
1), the code is asked each time the phone is  
switched on.  
The PUK (Personal Unblocking Key) code is required  
to change a blocked PIN code. The PUK code may be  
supplied with the SIM card. If not, contact your local  
service provider for the code.  
If you key in an incorrect PUK code ten times in  
succession, the SIM card cannot be used anymore.  
Contact your service provider for a new card.  
If you key in an incorrect PIN code three times in  
succession, key in the PUK code and press Ok. Key in  
a new PIN code and press Ok. Key in the new code  
again and press Ok.  
You cannot change the PUK code. If you lose the  
code, contact your service provider.  
PUK2 code  
PIN2 code  
The PUK2 code, supplied with some SIM cards, is  
required to change a blocked PIN2 code.  
The PIN2 code, supplied with some SIM cards, is  
required to access some functions, such as charging  
unit counters. These functions are only available if  
supported by your SIM card.  
If you key in an incorrect PUK2 code ten times in  
succession, you cannot use the functions requiring  
the PIN2 code. Contact your service provider for a  
new card.  
If you key in an incorrect PIN2 code three times in  
succession, key in the PUK2 code and press Ok. key  
in a new PIN2 code and press Ok. Key in the new  
code again and press Ok.  
You cannot change the PUK2 code. If you lose the  
code, contact your service provider.  
Barring Password  
The 4-digit barring password is required when you use  
the Call Barring function. You obtain the password  
from your service provider when you subscribe to this  
function.  
122  
123  
11-A200-Additional 3/14/01 3:47 PM Page 124  
Re f e re n c e In f o rm a t io n  
Re f e re n c e In f o rm a t io n  
Use only Samsung-approved batteries and  
Using the Batteries  
recharge your battery only with Samsung-approved  
chargers. When a charger is not in use, disconnect  
it from the power source. Do not leave the battery  
connected to a charger for more than a week,  
since overcharging may shorten its life.  
Your phone is powered by a rechargeable Li-ion  
standard battery.  
The following batteries are also available (ask your  
SAMSUNG dealer for further details):  
BSL0375 slim battery  
Extreme temperatures will affect the charging  
capacity of your battery: it may require cooling or  
warming first.  
BST0378 standard battery  
Precautions When Using Batteries  
Do not leave the battery in hot or cold places, such  
as in a car in summer or winter conditions, as you  
will reduce the capacity and life-time of the  
battery. Always try to keep the battery at room  
temperature. A phone with a hot or cold battery  
may temporarily not work, even when the battery  
is fully charged. Li-ion batteries are particularly  
affected by temperatures below 0 °C (32 °F).  
Never use any charger or battery that is damaged  
in any way.  
Use the battery only for its intended purpose.  
If you use the phone near the network’s base  
station, it uses less power; talk and standby times  
are greatly affected by the signal strength on the  
cellular network and the parameters set by the  
network operator.  
Do not short-circuit the battery. Accidental short  
circuiting can occur when a metallic object (coin,  
clip or pen) causes a direct connection between  
the + and - terminals of the battery (metal strips  
on the back of the battery), for example when  
you carry a spare battery in a pocket or bag.  
Short-circuiting the terminals may damage the  
battery or the object causing the short-circuit.  
Battery charging times depend on the remaining  
battery charge and the type of battery and charger  
used. The battery can be charged and discharged  
hundreds of times, but it will gradually wear out.  
When the operation time (talk time and standby  
time) is noticeably shorter than normal, it is time  
to buy a new battery.  
Dispose of used batteries in accordance with local  
regulations. Always recycle. Do not dispose of  
batteries in a fire.  
If left unused, a fully charged battery will  
discharge itself over time.  
124  
125  
11-A200-Additional 3/14/01 3:47 PM Page 126  
Re f e re n c e In f o rm a t io n  
Re f e re n c e In f o rm a t io n  
Operating Environment  
Safety Information  
Remember to follow any special regulations in  
force in any area and always switch off your  
phone whenever it is forbidden to use it, or when  
it may cause interference or danger (in a hospital  
for example).  
Road Safety  
Remember, road safety always comes first!  
Do not use a hand-held phone while driving a  
vehicle. Always park the vehicle before having a  
conversation.  
Operation of any radio transmitting equipment,  
including cellular phones, may interfere with  
inadequately protected medical devices. Consult  
a physician or the manufacturer of the medical  
device if you have any questions. Other electronic  
equipment may also be subject to interference.  
Make sure that the phone is stored safely and will  
not fall or be broken in the event of a collision or  
emergency stop.  
The use of an alert device to operate a vehicles  
lights or horn on public roads is not permitted.  
As with other mobile radio transmitting equipment,  
you are advised that for satisfactory operations  
and personal safety, the equipment should only be  
used in the normal operating position.  
Only qualified personnel should install or service  
the phone in a vehicle. Faulty installation or  
service may be dangerous and may invalidate any  
warranty applicable to the unit.  
The effect of the GSM transmit/duty cycle on  
hearing aids and pacemakers is being  
investigated, and there is potential hazards  
associated with use close to such personal  
medical electronic devices.  
Electronic fuel injection, anti-skid braking,  
electronic cruise control or any other electronic  
systems may malfunction due to the lack of  
protection from radio signals. Check regularly that  
all cellular phone equipment in your vehicle is  
mounted and operating correctly.  
Always switch off the phone when at a refuelling  
point (service station). You are reminded of the  
need to observe restrictions on the use of radio  
equipment in fuel depots (fuel storage and  
distribution areas), chemical plants or where  
blasting operations are in progress.  
Do not store or carry flammable liquids, gases or  
explosive materials in the same compartment as  
the phone, its parts or accessories.  
126  
127  
11-A200-Additional 3/14/01 3:47 PM Page 128  
Re f e re n c e In f o rm a t io n  
Re f e re n c e In f o rm a t io n  
• Switch off your cellular phone when in an aircraft.  
The use of cellular phones in an aircraft is illegal  
and may be dangerous to the operation of the  
aircraft or disrupt the cellular network. Failure to  
observe these instructions may lead to the  
suspension or denial of cellular telephone  
Do not attempt to open the phone. Non-expert  
handling of the phone may damage it.  
Do not drop or knock the phone. Rough handling  
may damage the internal circuits.  
Do not use harsh chemicals, cleaning solvents or  
strong detergents to clean the phone. Wipe it with  
a soft cloth slightly dampened in mild, soapy water.  
services to the offender, legal action or both.  
Care and Maintenance  
If the phone or any of its accessories are not  
working properly, take them to your nearest  
qualified service centre. The personnel there will  
assist you, and if necessary, arrange for the phone  
to be repaired.  
Your phone is a product of superior design and  
craftsmanship and should be treated with care. The  
suggestions below will help you fulfill the warranty  
obligations and enjoy this product for many years.  
Keep the phone and all its parts and accessories  
out of the reach of small children.  
Emergency Calls  
Important!This phone, like any cellular phone, uses  
radio signals, cellular and landline  
networks, as well as user-programmed  
functions that cannot guarantee  
connection in all conditions. Therefore,  
you should never rely solely on any  
cellular phone for essential  
Keep the phone dry. Precipitation, humidity and  
liquids containing minerals will corrode the  
electronic circuits.  
Do not use or store the phone in dusty, dirty areas  
as its components may be damaged.  
Do not store the phone in hot areas. High  
temperatures can shorten the life of electronic  
devices, damage batteries and warp or melt  
certain plastics.  
communications (medical emergencies for  
example).  
Remember, to make or receive any calls, the phone  
must be switched on and in a service area with  
adequate cellular signal strength.  
Do not store the phone in cold areas. When the  
phone warms up (to its normal temperature),  
moisture can form inside the phone, which may  
damage the electronic circuits.  
Emergency calls may not be possible on all cellular  
phone networks or when certain network services  
and/or phone features are in use. Check with local  
cellular service providers.  
128  
129  
12-A200-Glossary 3/14/01 3:46 PM Page 130  
Glo s s a ry  
Glossary  
To help you understand the main technical terms and  
abbreviations used in this booklet and take full  
advantage of the features on your mobile phone, here  
are a few definitions.  
GSM (Global System for Mobile Communication)  
International standard for cellular communication,  
guaranteeing compatibility between the various  
network operators. GSM covers most European  
countries and many other parts of the world.  
Active Folder  
Ability to voice dial or voice command immediately on  
opening the phone.  
Line Identification Services  
Service allowing subscribers to view or block the  
telephone numbers of callers.  
ALS(Alternate Line Service)  
Multi-party Calling  
ALS provides the capability of associating two  
alternate lines with one SIM card. You can make and  
receive calls on either line as desired with this  
service.  
Ability to establish a conference call involving up to  
five additional parties.  
Phone’s Password  
Call Barring  
Security code used to unlock the phone when you  
have selected the option to lock it automatically each  
time it switches on.  
Ability to restrict outgoing and incoming calls.  
Call Diverting  
PIN (Personal Identification Number)  
Ability to reroute calls to another mobile or fixed line.  
Security code that protects the phone/SIM against  
unauthorised use. The PIN is supplied by the service  
provider with the SIM card. It may be a four to eight-  
digit number and can be changed, as required.  
Call Holding  
Ability to put one call on standby while answering or  
making another call; you can then switch between  
the two calls, as required.  
Call Waiting  
Ability to inform users that they have an incoming call  
when engaged on another call.  
131  
130  
12-A200-Glossary 3/14/01 3:46 PM Page 132  
Glo s s a ry  
Glo s s a ry  
PUK (PIN Unblocking Key)  
Soft Keys  
Security code used to unlock the phone when an  
incorrect PIN has been entered three times in  
succession. The eight-digit number is supplied by  
the service provider with the SIM card.  
and  
on the phone, the purpose of which:  
Varies according to the function that you are  
currently using  
Is indicated on the bottom line of the display just  
above the corresponding key  
Roaming  
Voice Mail  
Use of your phone when you are outside your home  
area (when travelling for example).  
Computerised answering service that automatically  
answers your calls when you are not available, plays  
a greeting (optionally in your own voice) and records  
a message.  
SIM (Subscriber Identification Module)  
Card containing a chip with all the information  
required to operate the phone (network and memory  
information, as well as the subscriber’s personal  
data). The SIM card fits into a small slot on the back  
of the phone and is protected by the battery.  
SMS (Short Message Service)  
Network service sending and receiving messages to  
and from another subscriber without having to speak  
to the correspondent. The message created or  
received (up to 160 characters long) can be  
displayed, received, edited or sent.  
132  
133  
12-A200-Glossary 3/14/01 3:46 PM Page 134  
In d e x  
Index  
E
L
A
multiparty • 32  
received (1-2) • 58  
records (1) • 58  
searching for a number in  
the phonebook • 39  
time (1-4) • 59  
Earmicrophone • 21  
Earpiece volume • 24  
Emergency calls • 129  
Entering text • 41  
Language • 81  
Last number redialling • 23  
LCD  
Access codes • 121  
Accessories • 7  
Active Folder • 84  
Active Line • 85  
display • 13  
Error Tone (4-7) • 79  
settings • 99  
Alarm (6-2) • 103  
Alert Type (4-4) • 77  
ALS • 116  
Length of calls • 59  
Letters  
via the phonebook • 23  
waiting• 91  
F
entering • 41  
Call Time (1-4) • 59  
Call Waiting • 31; 91  
Care • 128  
AnswerPhone (3-4) • 73  
Any-key Answer • 82  
Auto Answer • 83  
Auto Redial • 83  
FDN Mode • 98  
Fixed Dial Number  
mode • 98  
Line Identification • 94  
Locking  
phone • 97  
Changing  
Functions  
SIM card • 98  
Low battery indicator • 20  
passwords • 97  
PIN • 97  
selecting • 57  
B
PIN2 • 98  
G
Backlight • 13; 82  
M
Characters  
Barring  
Games (7) • 111  
entering • 41  
Maintenance • 98  
Melody composer (4-2) • 75  
Menu  
calls • 89  
Glossary • 130  
Charging batteries • 18  
Clock (6-7) • 110  
Closed User Group • 94  
Conference calls  
• See Multiparty calls  
Connect Tone (4-9) • 79  
Connect to Voice  
Mail (2-1) • 61  
password • 121  
Batteries  
Greeting Message • 80  
map • 53  
scrolling • 51  
charging • 18  
installing • 15  
H
shortcut numbers • 52  
Message Tone (4-6) • 78  
Messages • 61  
Holding calls • 30  
low battery indicator • 20  
precautions • 124  
Broadcast (2-6) • 66  
Browser Settings (5-5) • 100  
I
answering • 72  
broadcast (2-6) • 66  
greeting • 79  
Icons • 11  
Contrast • 99  
Copying phonebook  
numbers • 38  
Cost of calls(1-5) • 60  
CUG (9-6)• 94  
Identifying a caller • 84  
Information numbers • 39  
Input mode  
C
preset (2-4) • 65  
reading (2-2) • 62  
setup (2-5) • 65  
voice (2-1) • 61  
writing (2-3) • 64  
Microphone mute • 28  
Minute Minder (4-8) • 79  
Missed calls (1-1) • 58  
deleting • 27  
Calculator (6-3) • 105  
Calendar (6-5) • 108  
Call Barring • 89  
Call Cost (1-5) • 60  
Caller ID • 84  
Calls  
changing • 41  
four modes • 42  
setting • 81  
D
International calls • 22  
Internet • 112  
Date setting (6-7) • 110  
Deleting  
answering • 25  
answering a second  
call • 31  
melody • 76  
K
messages • 83  
Key tones  
editing the number • 27  
viewing • 26; 58  
Multiparty calls  
missed calls • 26  
phonebook entries • 38  
voice commands • 71  
voice dial numbers • 70  
voice memos • 72  
Dialled Calls (1-3) • 59  
Dialling • 22  
adjusting • 24  
muting • 34  
selecting • 78  
sending • 34  
Keypad Tone (4-5) • 78  
Keys  
barring • 89  
cost (1-5) • 60  
dialled (1-3) • 59  
diverting • 86  
emergency • 129  
ending • 23  
dropping a  
participant • 33  
making • 32  
private conversation • 32  
Mute  
location • 9  
purpose • 10  
holding • 30  
voice • 23; 68  
Display  
key tones • 34  
microphone • 28  
international • 22  
making • 22  
external • 9;13  
icons • 11  
missed • 26; 58  
layout • 8  
134  
135  
Diverting calls • 86  
12-A200-Glossary 3/14/01 3:46 PM Page 136  
In d e x  
In d e x  
storing numbers/  
Setting  
playing recorded  
N
names • 35  
Names  
alarm • 107  
names/numbers • 70  
recording • 69  
voice recording • 37  
entering • 41  
date• 110  
PIN • 120  
text language • 81  
time• 110  
Voice functions (3) • 68  
Voice language  
searching/dialling • 39  
storing • 35  
changing • 97  
checking • 96  
Settings  
selecting • 81  
Network Selection • 92  
PIN2 • 120  
LCD (5-4) • 99  
phone (5-1) • 80  
reset • 85  
Voice mail (2-1)  
connecting to • 61  
server number • 62  
Voice Memo (3-3) • 71  
deleting • 72  
Network Services (5-2) • 96  
changing • 98  
Number  
Preset Message  
caller • 94  
own • 81  
List (2-4) • 65  
security (5-4) • 96  
Setup (2-5) • 65  
SIM card  
Problem, solving • 118  
searching/dialling • 39  
PUK • 123  
recording • 72  
replaying • 72  
Voice Server Number • 62  
Volume  
storing • 35  
voice dial • 23; 68  
PUK2 • 123  
installing • 15  
locking • 98  
SIM Lock • 98  
O
SMS messages • 34  
Solving problems • 118  
Switching on/off • 20  
adjusting • 24  
selecting the ring  
(4-3) • 77  
R
Organizer(6) • 101  
Read Messages (2-2) • 62  
Options  
Received Calls (1-2) • 58  
selecting • 47  
Recording  
Own Number • 81  
T
Text  
W
answering message • 73  
memos • 72  
World Time (6-6) • 109  
Write Messages (2-3) • 64  
WWW Services (8) • 112  
P
voice commands • 71  
voice dial names • 69  
voice dial numbers • 69  
entering • 41  
input modes • 41  
language • 81  
Time  
setting • 110  
world (6-6) • 109  
To Do List (6-4)• 107  
Tone  
connect (4-9) • 79  
error (4-7) • 79  
keypad (4-5) • 78  
message (4-6) • 78  
ring (4-1) • 74  
Travel adapter • 18  
Password  
barring • 123  
changing • 97  
phone • 121  
Records  
call (1) • 58  
Redialling  
automatically • 83  
last number • 23  
Reference information • 121  
Replaying memos) • 72  
Reset Settings • 85  
Ring Tone (4-1) • 74  
Ring Volume (4-3) • 77  
Roaming • 132  
Pasting phonebook  
numbers • 37  
Personal Identification  
Number • See PIN  
Phone  
layout • 8  
lock • 97  
password • 121  
Settings (5-1) • 806+  
Phonebook • 35  
copying numbers • 38  
deleting recorded  
names • 37  
S
U
Safety  
Unpacking • 7  
User groups • 94  
batteries • 124  
information • 126  
precautions • 5  
dialling • 39  
editing numbers • 38  
erasing numbers • 38  
making calls • 22; 39  
pasting numbers • 38  
playing recorded  
names • 37  
V
Scheduler (6-1) • 105  
Second call • 31  
Security Settings (5-3) • 96  
Selecting functions/  
options • 47  
Sending key tones • 34  
Service directory • 39  
Service light • 14; 83  
Voice command (3-2) • 71  
Voice dial (3-1) • 21; 68  
activating • 69  
deleting numbers • 70  
searching • 39  
136  
137  
12-A200-Glossary 3/14/01 3:46 PM Page 138  
12-A200-Glossary 3/14/01 3:47 PM Page 140  

Toshiba MK2552GSX User Manual
Toshiba Canvio Hard Drive HDTC615XK3B1 User Manual
Sony Dream Machine ICF C390L User Manual
Seagate SAVVIO ST9300403SS User Manual
Seagate Replica ST905004BDA101 RK User Manual
Pioneer DVD 302 User Manual
Philips SAC2561W User Manual
Philips Professional 202P4 User Manual
Panasonic SC PM313 User Manual
Numark Industries CDN 22MK III User Manual