DUAL GSM TELEPHONE
SGH-2400
OWNER’S MANUAL
Contents
Safety Precautions
7
Unpacking
9
Your Phone
10
Phone Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Service Light . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Getting Started 15
Your First Call . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Installing the SIM Card . . . . . . . . . . . . . . . . . . 16
Charging a Battery . . . . . . . . . . . . . . . . . . . . . . 19
Switching the Phone On/Off . . . . . . . . . . . . . . 21
Access Codes . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using the Earphone . . . . . . . . . . . . . . . . . . . . . .25
General Functions
26
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . 28
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . 29
Viewing Missed Calls . . . . . . . . . . . . . . . . . . . . 30
Selecting Functions and Options
32
Example: Setting the Text Language . . . . . . . . 34
Phonebook
36
Storing a Phone Number with a Name . . . . . 36
Searching for and Dialling a Number
in the Phonebook . . . . . . . . . . . . . . . . . . . . . . . 38
Phonebook Options . . . . . . . . . . . . . . . . . . . . . 39
Voice Dialling . . . . . . . . . . . . . . . . . . . . . . . . . . 42
3
Contents
(continued)
In-Call Options
45
Switching the Microphone Off (Mute) . . . . . .45
Searching for a number in the Phonebook . . 46
Putting a Call on Hold . . . . . . . . . . . . . . . . . . . . 47
Answering a Second Call . . . . . . . . . . . . . . . . 48
Making a Multiparty Call . . . . . . . . . . . . . . . . . 49
Muting/Sending Key Tones . . . . . . . . . . . . . . . 51
Using the SMS Service . . . . . . . . . . . . . . . . . . 51
Using the Menus 52
Using the Soft Keys . . . . . . . . . . . . . . . . . . . . . 52
Using the Index System . . . . . . . . . . . . . . . . . . 53
Menu Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Quick Access
58
Connect to Voice Mail (Menu 1-1) . . . . . . . . . . 58
Voice Server Number (Menu 1-2) . . . . . . . . . . 58
Service Directory (Menu 1-3) . . . . . . . . . . . . . . 59
Call Records
60
Missed Calls (Menu 2-1) . . . . . . . . . . . . . . . . . . 60
Received Calls (Menu 2-2) . . . . . . . . . . . . . . . . 60
Dialled Calls (Menu 2-3) . . . . . . . . . . . . . . . . . . 61
Call Time (Menu 2-4) . . . . . . . . . . . . . . . . . . . . . 61
Call Cost (Menu 2-5) . . . . . . . . . . . . . . . . . . . . . 62
Text Messages 63
Read Messages (Menu 3-1) . . . . . . . . . . . . . . . 63
Write Messages (Menu 3-2) . . . . . . . . . . . . . . . 64
Preset Message List (Menu 3-3) . . . . . . . . . . . 65
Setup (Menu 3-4) . . . . . . . . . . . . . . . . . . . . . . . . 66
Broadcast (Menu 3-5) . . . . . . . . . . . . . . . . . . . . 67
4
Contents
(continued)
Voice Memo
69
Voice Memo Record (Menu 4-1) . . . . . . . . . . . 69
Voice Memo Replay (Menu 4-2) . . . . . . . . . . . . 70
Voice Memo Delete One (Menu 4-3) . . . . . . . . 70
Voice Memo Delete All (Menu 4-4) . . . . . . . . . 70
Sound Settings 71
Ring Tone (Menu 5-1) . . . . . . . . . . . . . . . . . . . . 71
Ring Volume (Menu 5-2) . . . . . . . . . . . . . . . . . . 71
Alert Type (Menu 5-3) . . . . . . . . . . . . . . . . . . . . 71
Keypad Tone (Menu 5-4) . . . . . . . . . . . . . . . . . . 72
Message Tone (Menu 5-5) . . . . . . . . . . . . . . . . 72
Error Tone (Menu 5-6) . . . . . . . . . . . . . . . . . . . . 73
Minute Minder (Menu 5-7) . . . . . . . . . . . . . . . . 73
Connect Tone (Menu 5-8) . . . . . . . . . . . . . . . . . 73
Phone Settings 74
Greeting Message (Menu 6-1) . . . . . . . . . . . . . 74
Own Number (Menu 6-2) . . . . . . . . . . . . . . . . . 74
Language (Menu 6-3) . . . . . . . . . . . . . . . . . . . . 75
Any-key Answer (Menu 6-4) . . . . . . . . . . . . . . . 75
Backlight (Menu 6-5) . . . . . . . . . . . . . . . . . . . . . 76
Service Light (Menu 6-6) . . . . . . . . . . . . . . . . . . 76
Auto Redial (Menu 6-7) . . . . . . . . . . . . . . . . . . . 77
Auto Answer (Menu 6-8) . . . . . . . . . . . . . . . . . . 77
Caller ID (Menu 6-9) . . . . . . . . . . . . . . . . . . . . . 77
Active Flip (Menu 6-0) . . . . . . . . . . . . . . . . . . . . 78
Reset Settings (Menu 6- ) . . . . . . . . . . . . . . . . 78
*
Clock Settings
79
Set Time (Menu 7-1) . . . . . . . . . . . . . . . . . . . . . 79
Set Date (Menu 7-2) . . . . . . . . . . . . . . . . . . . . . 79
Alarm (Menu 7-3) . . . . . . . . . . . . . . . . . . . . . . . . 79
World Time (Menu 7-4) . . . . . . . . . . . . . . . . . . . 81
5
Contents
(continued)
Security 82
PIN Check (Menu 8-1) . . . . . . . . . . . . . . . . . . . . 82
Change PIN (Menu 8-2) . . . . . . . . . . . . . . . . . . . 83
Phone Lock (Menu 8-3) . . . . . . . . . . . . . . . . . . . 83
Change Password (Menu 8-4) . . . . . . . . . . . . . 84
SIM Lock (Menu 8-5) . . . . . . . . . . . . . . . . . . . . . 84
FDN Mode (Menu 8-6) . . . . . . . . . . . . . . . . . . . . 84
Change PIN2 (Menu 8-7) . . . . . . . . . . . . . . . . . . 85
Network Services
86
Call Diverting (Menu 9-1) . . . . . . . . . . . . . . . . . 86
Call Barring (Menu 9-2) . . . . . . . . . . . . . . . . . . . 88
Call Waiting (Menu 9-3) . . . . . . . . . . . . . . . . . . 90
Network Selection (Menu 9-4) . . . . . . . . . . . . . 91
Line Identification (Menu 9-5) . . . . . . . . . . . . . 93
Closed User Group (CUG) (Menu 9-6) . . . . . . . 93
Solving Problems 95
Using the Batteries
98
Precautions When Using Batteries . . . . . . . . 98
Safety Information
100
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Operating Environment . . . . . . . . . . . . . . . . . . 100
Care and Maintenance . . . . . . . . . . . . . . . . . 102
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . 103
Glossary of Terms 104
Index
108
Installing the Flip Cover
112
6
Safety Precautions
Read these simple guidelines. Failure to comply with
them may be dangerous or illegal.
For more detailed safety information, see Safety
Information on page 100.
Road safety comes first
Do not use a hand-held phone while driving; park the
vehicle first. Remember that in some countries, it is
illegal to use a hand-held phone while driving.
Switch off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in aircraft
Mobile phones can cause interference. Using them on
aircraft is both illegal and dangerous.
Respect special regulations
Follow any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger
(in a hospital for example).
Interference
All mobile phones may be subject to radio
interference, which may affect their performance.
7
S a f e t y P re c a u t io n s
Qualified service
Only qualified service personnel must repair cellular
equipment. Use only approved accessories and
batteries.
Use sensibly
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency calls
Ensure the phone is switched on and in service.
Enter the emergency number (112 or another official
emergency number) and press
. Give your location.
Do not end the call until given permission to do so. End
the call by closing the flip cover or pressing
.
IMPORTANT! Use only SAMSUNG-approved
accessories. This phone is intended for use with a
SAMSUNG-approved:
• Travel adapter (TA12)
• Desktop charger (DTC240G)
• Cigarette lighter adapter (CLA12)
The use of any other power accessory will invalidate
any approval or warranty applying to the phone, and
may be dangerous.
When you disconnect the power cord of any
accessory, grasp and pull the connector, not the cord.
8
Unpacking
Your package contains the following items.
Phone
Travel Adapter (TA12)
Standard Battery
(BTS24G)
Owner’s Manual
In addition, you can obtain the following accessories
for your phone from your local SAMSUNG dealer:
• Desktop charger (DTC240G)
• Cigarette lighter adapter (CLA12)
• Hands-free car kit (HFK240)
• Slim, Standard, Extended and Ultra Extended
batteries (BTI24G, BTS24G, BTE24G, BTL24G)
• Data kit (PCD9632)
• Earphone (EP210); depending on the country, may
be supplied in the standard package
9
Your Phone
Phone Layout
The following illustration shows the main elements of
your phone.
Front
Service light
Antenna
Earpiece
Display
Cancel/
correction key
Earphone jack
Volume/menu
browse keys
Soft key (left)
Soft key (right)
Dial/menu
comfirmation
key
Alphanumeric
keys
Special
function keys
Microphone
Flip cover
10
Yo u r P h o n e
Key
Description
Perform the functions indicated by the text
above them (in the bottom line of the
display).
(soft keys)
Deletes characters from the display.
In the menu facility, returns to the previous
menu level.
Makes or answers a call.
In idle mode, recalls the last number
dialled.In the menu facility, selects a menu
function or stores information that you have
entered (such as a name) in the phone or
SIM memory.
Ends a call. Also switches the phone on and
off when pressed and held.
In the menu facility, returns to the idle
mode and cancels your input.
Enters numbers, letters and some special
characters.
Enters special dial characters.
(on the side of the phone)
During a call, adjusts the earpiece volume.
In idle mode with the flip cover closed, if you
hold down the up key, the alert type quickly
switches to the vibration mode, with the flip
cover open, the keys adjust the key tone
volume. In the menu facility,scrolls through
the menu options and phonebook memory.
11
Yo u r P h o n e
Display
Display Layout
The display comprises three areas.
Icons
Text and
graphic area
Me nu
Pho ne Bo o k
Soft key
indications
Area
Description
Displays various icons (see opposite).
First line
Middle lines Display messages, instructions and
any information that you enter
(number to be dialled, for example).
Last line
Shows the functions currently
assigned to the two soft keys.
12
Yo u r P h o n e
Icons
Icon
Description
Shows the received signal strength. The
greater the number of bars, the better the
signal strength.
Appears when a call is in progress.
Appears when a new text message has
been received.
Appears when you are out of your home
area and have registered with a different
network (when travelling in other countries,
for example).
Shows the level of your battery. The more
bars you see, the more power you have
left.
13
Yo u r P h o n e
Backlight
The display and keypad are illuminated by a
backlight. When you press any key, the backlight
illuminates. It turns off if no key is pressed within a
given period of time, depending on the Backlight
option set in the Phone Settings menu. The
backlight remains on at all times when the phone is
connected to a car kit (optional).
To specify the length of time for which the backlight
is active, set the Backlight menu option (6-5); see
page 76 for further details.
Service Light
The service light is in the top left-hand corner of the
phone. It flashes when services are available on the
phone.
To activate or deactivate use of the service light, set
the Service Light menu option (6-6); see page 76
for further details.
14
Getting Started
Your First Call
The following diagram explains the main steps required
when making your first call and indicates the pages on
which you can find more detailed instructions.
Page 16
Page 19
Page 21
Page 21
Page 26
Page 27
15
Ge t t in g S t a rt e d
Installing the SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details (PIN, optional services available
and so on).
Important!The plug-in SIM card and its contacts
can be easily damaged by scratches or
bending, so be careful when handling,
inserting or removing the card.
Keep all SIM cards out of the reach of
small children.
1. If necessary, switch off the phone by holding down
the
key until the Good bye message is
displayed.
2. Remove the battery. To do so, push and hold down
the catch above the battery on the back of the
phone, and slide the battery down the phone.
Then lift the battery away.
16
Ge t t in g S t a rt e d
3. Squeeze the holder and lift it up.
4. Insert the SIM card ensuring that the cut corner is
top left and the gold contacts of the card face into
the phone.
17
Ge t t in g S t a rt e d
5. Hold the SIM card in position and push the holder
back to lock the SIM card into place.
6. Place the battery back on the phone. Slide the
battery up until it locks into place.
18
Ge t t in g S t a rt e d
Charging a Battery
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter is provided with your phone.
Use only approved batteries and chargers. Ask your
local SAMSUNG dealer for further details.
The phone can be used while the battery is charging.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
90minutes.
1. Connect the lead from the travel adapter to the
bottom of the phone. Check that the arrow on
the lead connector is facing towards the front of
the phone.
2. Connect the adapter to a standard AC wall outlet.
When the battery is charging, the battery icon
in the top right-hand corner of the display fills
repeatedly.
19
Ge t t in g S t a rt e d
3. When charging is finished, disconnect the adapter
from the power outlet.
Disconnect the adapter from the phone by
pressing the grey tabs on either side of the
connector and pulling the connector out.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, you will hear a warning tone and a
message will be repeated at regular intervals on the
display:
**Warning**
Bat t e ry Low
When the battery becomes too weak for the phone
to operate, it switches off automatically.
20
Ge t t in g S t a rt e d
Switching the Phone On/ Off
1. Open the flip cover.
2. Hold down the
key for more than one
second to switch the phone on.
3. If the phone asks for a password, key in the
password and press the OK soft key. The
password is factory set to 0000. For further
details, see page 22.
4. If the phone asks for a PIN, key in the PIN and
press the OK soft key. For further details, see
page 23.
The idle screen, illustrated below, is displayed.
<SERVICE PROVIDER>
Sat 1 4 Mar 1 2 :5 7
Menu PhoneBook
Note: The display language is determined by the
SIM card inserted. To change the language,
use the Language menu option (6-3); for
further details, refer to page 75.
5. When you wish to switch the phone off, hold down
the
button for more than two seconds.
21
Ge t t in g S t a rt e d
Access Codes
There are several access codes that are used by your
phone and its SIM card. These codes help you protect
the phone against unauthorised use.
When requested for any of the codes explained
below, key in the appropriate code (displayed as
asterisks) and press the OK soft key. If you make a
mistake, press C one or more times until the
incorrect digit is cleared and then continue entering
the correct code.
The access codes (except for the PUK and PUK2
codes) can be changed using Security menu options.
See page 82 for further details.
Important!Avoid using access codes resembling
emergency numbers, such as 112, so that
you do not dial an emergency number
accidentally.
Phone Password
The Phone Lock feature uses the phone password to
protect your phone against unauthorised use. The
phone password is supplied with the phone and is
factory set to 0000.
To...
Refer to page...
Activate/deactivate
83 (menu option 8-3).
the Phone Lock feature
Change the phone password 84 (menu option 8-4).
22
Ge t t in g S t a rt e d
PIN
The Personal Identification Number or PIN (4 to
8 digits) protects your SIM card against unauthorised
use. It is usually supplied with the SIM card.
If you enter an incorrect PIN three times in succession,
the code is disabled and cannot be used until you
re-enable it by entering the PUK (see below).
To...
Refer to page...
Activate/deactivate
82 (menu option 8-1).
the PIN Check feature
Change the PIN
83 (menu option 8-2).
PUK
The 8-digit PUK (Personal Unblocking Key) is required
to change a disabled PIN. The PUK may be supplied
with the SIM card. If not, or you have lost it, contact
your service provider.
To re-enable your PIN, proceed as follows.
1. Key in the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the OK
soft key.
3. When the Confirm New PIN message is
displayed, key in the same code again and press
the OK soft key.
If you enter an incorrect PUK ten times in succession,
the SIM card becomes invalid. Contact your service
provider for a new card.
23
Ge t t in g S t a rt e d
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions, such as
setting the maximum cost of a call. These functions
are available if supported by your SIM card.
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
To change the PIN2, refer to page 85 (menu option 8-7).
PUK2
The 8-digit PUK2 (Personal Unblocking Key 2),
supplied with some SIM cards, is required to change
a disabled PIN2. If you lose the code, contact your
service provider.
To re-enable your PIN2, proceed as follows.
1. Key in the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press the OK
soft key.
3. When the Confirm PIN2 message is displayed,
key in the same code again and press the OK soft
key.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your service
provider for a new card.
24
Ge t t in g S t a rt e d
Barring Password
The 4-digit barring password is required when you use
the Call Barring function. You obtain the password
from your service provider when you subscribe to this
function. See page 88 for further details.
Using the Earphone
Note: The earphone may be an option in some
countries. If you wish to purchase one, contact
your local SAMSUNG dealer.
With the earphone, you can talk without using your
hands. When you connect the earphone to the
earphone jack on the left side of the phone, the
earphone operates in the same way as the phone’s
speaker and microphone.
The button on the earphone allows you to answer or
end a call without opening the flip cover or pressing
a button on the phone. If you receive a second call,
press the button to end the first call and answer the
second call.
25
General Functions
Making a Call
When the idle screen is displayed, key in the area
code and phone number and press
.
Note: If you have set the Auto Redial option (6-7) to ON
(see page 77) and the person called does not
answer or is already on the phone, the number is
redialled automatically up to ten times.
International Calls
1. Press and hold down the 0 key.
The + character appears.
2. Key in the country code, area code and phone
number and press
.
Correcting the Number
To clear...
Then...
The last digit
displayed
Press the C key.
Any other digit
in the number
Press the soft key until the
cursor ( ) is immediately to the
right of the digit to be cleared.
Press the C key.
The whole display Hold down the C key for more
than one second.
26
Ge n e ra l Fu n c t io n s
Ending a Call
When you have finished your call, briefly press the
key.
Making a Call from the Phonebook
You can store the names and phone numbers called
regularly in the SIM card and phone memory, called
the phonebook. You then simply select the required
name to recall the associated number. For further
details on the Phonebook feature, refer to page 36.
Voice Dialling
If you have set the Active Flip option (6-0) to ON
(see page 78), your phone also allows you to say a
name when you open the flip cover. It then automa-
tically dials the number stored with the name. For
further details on the Voice Dialling feature, refer to
page 42.
Last Number Redial
The phone stores the last 10 numbers dialled. To
recall any of these numbers, proceed as follows.
1. If there are any characters on the display, clear
the display by holding down the C key for more
than one second.
2. Hold down
to display the last number dialled.
27
Ge n e ra l Fu n c t io n s
3. Use the
of the phone) to scroll through the numbers until
the required number is displayed.
soft key (or or on the left side
4. Press to dial the number displayed.
Adjusting the Volume
During a call, if you want to adjust the earpiece
volume, use the volume keys on the left side of the
phone. Press
volume.
to increase and to decrease the
In idle mode with the flip cover open, you can adjust
the key tone volume using the same keys.
28
Ge n e ra l Fu n c t io n s
Answering a Call
When somebody calls you, the phone rings and the
phone icon in the middle of the screen flashes.
n n n n n
(( ))
Reject
Caller’s name
or number
Accept
If the caller can be identified, the caller’s phone
number (or name if stored in your phonebook) is
displayed. If the caller cannot be identified, only the
phone icon flashes.
1. If necessary, open the flip cover.
Press
or the Accept soft key. If the Any-key
Answer menu option (6-4) is set to ON, you can
press any key to answer a call except for
and the Reject soft key (see page 75).
Note: To reject an incoming call, press the Reject
soft key or
. If the Any-key Answer
menu option (6-4) is set to OFF, you can
reject the call by pressing or on the
left side of the phone.
2. End the call by closing the flip cover or pressing
.
Note: You can answer a call while using the
phonebook or menu features.
29
Ge n e ra l Fu n c t io n s
Viewing Missed Calls
If you are unable to answer a call for any reason, you
can find out who was calling you, if this service is
available. In this way, you can call the person back,
if necessary.
The number of missed calls is displayed on the idle
screen immediately after the call was missed.
To view the missed call immediately, proceed as
follows.
1. If the flip cover is... Then...
Closed
Open
Open the flip cover.
Press the View soft key.
The number corresponding to the most recent
missed call is displayed, if available.
2. To...
Then press the...
Scroll through the
missed calls
soft key.
Call the number displayed
key.
Edit or delete a missed
call number
Options soft key
(see the following
paragraphs).
30
Ge n e ra l Fu n c t io n s
Editing a Missed Call Number
1. Press the Options soft key.
2. Press the Select soft key.
3. Change the number as required. Press the
key to move back through the number.
soft
4. To...
Call the number
Then press the...
key.
Store the number
Save soft key and enter
the name and location
required (for further
details, refer to page36).
Deleting a Missed Call
1. Press the Options soft key.
2. Press the
option.
soft key to highlight the Delete
3. Press the Select soft key.
You can press
Call feature.
at any time to exit the Missed
Note: You can access the Missed Call feature at any
time by selecting the Missed Calls menu option
(2-1); for further details, see page 60.
31
Selecting Functions
and Options
Your phone offers a set of functions that allow
you to customise your phone. These functions are
arranged in menus and sub-menus, accessed via the
...
two soft keys marked . Each menu and sub-menu
allows you to view and alter the settings of a
particular function.
The roles of the soft keys vary according to the
current context; the label on the bottom line of the
display just above each key indicates its current role.
Example:
Enter Name
Press the right soft
key to access the
Voice Dialling
feature.
Press the left soft key
to search for a name
in the phonebook.
32
S e le c t in g Fu n c t io n s a n d Op t io n s
To view the various functions/options available and
select the one required, proceed as follows.
1. Press the appropriate soft key.
2. To...
Then press the...
Select the:
Left soft key.
• Function displayed
or
• Option highlighted
View the next function
or highlight the next
option in a list
Right soft key or the
key on the left
side of the phone.
Move back to the
previous function
or option in a list
key on the left
side of the phone.
Move back up one
C key.
level in the structure
Exit the structure
without changing
the settings
key.
In some functions, you may be asked for a password
or PIN. Enter the required code and press
.
33
S e le c t in g Fu n c t io n s a n d Op t io n s
Example: Setting the Text Language
1. When the idle screen is displayed, press the
Menu soft key to enter the menu facility.
<SERVICE PROVIDER>
Fri 1 5 May 1 0 :3 0
Menu PhoneBook
2. Scroll through the menus until you reach the
Phone Settings menu, by pressing the
soft
key (or the
phone).
or keys on the left side of the
Phone Set t ings
Select
6
3. To select the Phone Settings menu, press the
Select soft key or
.
Greet ing Message
Select 6.1
34
S e le c t in g Fu n c t io n s a n d Op t io n s
4. To reach the Text Language sub-menu, scroll
through the sub-menus until you reach the
Language sub-menu(6.3), by pressing the
soft
key (or the or keys on the left side of the
phone) and press the Select soft key or
.
Te xt Language
English
Current
language
Select 6.3.1
5. To view the languages available, press the
Select soft key or . The current setting is
highlighted within square brackets.
Deut sch
[ E n g l i s h
It aliano
Current
language
]
Select
6. Scroll through the list of languages until the
appropriate one is highlighted, by pressing the
soft key (or the
the phone).
or keys on the left side of
7. Press the Select soft key to confirm your
selection.
8. Press the C key three times to exit the menu
structure.
35
Phonebook
You can store phone numbers and their corresponding
names in the memory of your SIM card. In addition,
you can store up to 100 numbers and names in the
phone memory. The SIM card and phone memories,
although physically separate, are used as if they were
a single entity, called the phonebook.
Storing a Phone Number with a Name
As soon as you start to enter a number, Save appears
above the left soft key to allow you to store the
number in the phonebook.
1. Key in the number to be stored.
2. When you are sure that it is correct, press the
Save soft key.
Notes:
• If you make a mistake while entering a number,
correct it using the C key. For further details,
refer to page 26.
• To insert a dialling pause for special phone
services, such as banking by phone, hold down
the key. ‘P’ is displayed to indicate the pause.
*
3. Enter the corresponding name (the maximum
length depends on your SIM card). For information
on how to enter a name, see opposite.
4. When you are satisfied, press the OK soft key.
The phone now displays the first free location in
the SIM card for you to save the number and
name. If the card memory is full, the first free
location in the phone memory is displayed.
36
P h o n e b o o k
5. Press the right soft key to toggle between the
phone (To Phone) and card (To Card) memories.
6. If you do not want to save the number and name
in the suggested location, press C to clear the
location number and enter your preferred location
by pressing the number keys.
7. Press OK to store the name and number.
Entering a Name
1. Press the key labelled with the required letter:
• Once for the first letter
• Twice for the second letter
• And so on
List of characters available:
Key
Characters in the Order Displayed
Upper Case
Lower Case
1
2
3
4
5
6
7
8
9
0
. 1 ! ? & ¡ ¿ §
% 1 @ £ $ ¥
Space
Space
A B C 2 Ä Å Æ Ç G
D E F 3 É D F
G H I 4 Q Y
a b c 2 à ä å æ
d e f 3 è é
g h i 4 ì
J K L 5 L
j
k l
5
M N O 6 Ñ Ø Ö
P Q R S 7 P S X
T U V 8 Ü
m n o 6 ñ ø ò ö
p q r s 7 ß
t
u v 8 ù ü
W X Y Z 9 W
w x y z 9
0 ,
:
;
‘
“ /
=
0 - + ( ) x # < >
37
P h o n e b o o k
2. To switch between upper case and lower case
characters, press the Case soft key. All
subsequent letters will appear in the selected
case until the Case soft key is pressed again.
3. Select the other letters in the same way.
Note: The cursor moves to the right when you
press a different key. When entering the
same letter twice (or a different letter on
the same key), just wait for a few seconds
for the cursor to move right automatically,
and then select the next letter.
You can also move the cursor by using the
(
) and # ( ) keys. To delete letters,
*
press the C key.
Searching for and Dialling a Number in
the Phonebook
1. When the idle screen is displayed, press the
PhoneBook soft key.
You are asked to enter a name.
2. Enter the start of the name that you want to find
and press the Search soft key.
Note: You can also scroll through the phonebook
from the beginning, by pressing the Search
soft key directly.
The phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
38
P h o n e b o o k
3. To...
View the
Then press the...
View soft key.
highlighted entry
Select a
soft key (or the
or
different entry
keys on the left side of the
phone) one or more times
until the required entry is
highlighted.
Look for a name
starting with a
different letter
Key labelled with the
required letter.
4. Once you have found the required entry, press
to dial the number.
Phonebook Options
When storing or viewing a number in the phonebook,
Options appears above the left soft key to allow you
to access the phonebook options, described in the
following paragraphs.
Accessing the Options
To access the various phonebook options, proceed as
follows.
1. Press the Options soft key.
The first available option is highlighted.
39
P h o n e b o o k
2. To...
Then press the...
Select the
Select soft key.
highlighted option
Highlight a
soft key (or the
or
different option
keys on the left side of the
phone) one or more times
until the required option is
highlighted.
Voice Record
This option allows you to record the name vocally for
subsequent voice dialling.
Follow the instructions given by your phone to record
the required name.
Note: This option appears only when no name has
been recorded.
Play Voice
This option plays back the names that you have
recorded.
Note: This option appears only when you have
already recorded some names.
40
P h o n e b o o k
Voice Delete
This option allows you to delete a specific voice entry.
Note: This option appears only when you have
already recorded some names.
You are asked to confirm the deletion by pressing the
OK soft key.
Paste
This option allows you to paste the phonebook
number into the normal dialling mode. Use this option
to dial a number similar to one in the phonebook
(a different extension in the same office for example).
Use the C key to change the number as required
(refer to page 26 for further details). When you are
ready to dial, press
.
Edit
This option allows you to edit a number and name
stored in the phonebook.
Erase
This option allows you to erase a number and name
stored in the phonebook.
You are asked to confirm that you wish to erase the
name and number from the phonebook by pressing
the Yes soft key.
41
P h o n e b o o k
Copy
This option allows you to copy a phonebook number
to another location. Use this option to store a
number similar to one already in memory; once
copied, edit the number and store it in the
phonebook.
Voice Dialling
You can access the Voice menu options described in
the following paragraphs, by pressing the Phonebook
soft key, followed by the Voice soft key.
Accessing the Options
To access the various voice dial options, proceed as
follows.
To...
Then press the...
Select the
Select soft key.
highlighted option
Highlight a
soft key (or the
or
different option
keys on the left side of the
phone) one or more times
until the required option is
highlighted.
42
P h o n e b o o k
Record
This option allows you to register numbers for
subsequent voice dialling. Record the required name,
by following the instructions given by your phone to
enter the required telephone number and name.
Voice Dial
This option allows you to initiate a voice dial.
Pronounce the required name as clearly as possible.
You are asked to repeat the name a second time and
then the associated number is dialled.
Delete One
This option allows you to select a voice dial entry
and delete the information recorded. The phone
number remains in the phonebook but the voice
recording is deleted.
If the name displayed is... Then press the...
To be deleted
OK soft key.
Notto be deleted
soft key.
The next name is
displayed.
To exit the Delete One option, press the C key.
43
P h o n e b o o k
Play All
This option allows you to play back all recorded
names.
Delete All
This option allows you to delete all voice dial
information stored. The phone numbers remain in the
phonebook but the voice recordings are deleted.
Press the OK soft key when the following message is
displayed:
De le t e All
Confirm?
OK
Cancel
Otherwise, press the Cancel soft key to exit the
function without deleting the voice dial entries.
44
In-Call Options
Your phone provides a number of control functions
that you can use during a call. To access these
functions during a call, press the Options soft key.
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone
off, so that the other party cannot hear you.
Example: You wish to say something to another
person in the room but do not want the
other party to hear you.
To switch the microphone off temporarily, proceed as
follows.
1. Press the Options soft key.
2. Press the
soft key to highlight the Mute option.
3. Press the OK soft key.
Your correspondent can no longer hear you.
To switch the microphone back on, proceed as follows.
1. Press the Options soft key.
2. Press the
option.
soft key to highlight the Unmute
3. Press the OK soft key.
Your correspondent can hear you again.
45
In -Ca ll Op t io n s
Searching for a Number in the
Phonebook
You can search for a number in the phonebook during
a call.
1. Press the Options soft key.
2. Press the
soft key to highlight the
Phonebook option.
3. Press the OK soft key.
4. Enter the start of the name that you want to find
and press the Search soft key.
Note: You can also scroll through the phonebook
from the beginning, by pressing the Search
soft key directly.
The phonebook entries are listed, starting with the
first entry matching your input. This entry is also
highlighted.
5. To review the highlighted entry, press the View
soft key.
For a more detailed description of the Phonebook
feature, refer to page 36.
46
In -Ca ll Op t io n s
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can swap between the calls.
To place a call on hold, press the Option soft key,
and select the Hold option. You can reactivate the
call whenever you want, by pressing the Retrieve
soft key.
To make a call while you have a call in progress,
proceed as follows.
1. Key in the phone number that you wish to dial or
look it up in the phonebook.
2. Press
to dial the second call.
The first call is automatically put on hold.
Or alternatively, proceed as follows.
1. Put the current call on hold by pressing the
Options soft key, followed by the Hold option.
2. Make the second call in the normal way.
47
In -Ca ll Op t io n s
To swap between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other party.
When you have finished, end each call normally by
pressing the
key.
Answering a Second Call
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and if you have set the Call Waiting menu
option (9-3) to Active (see page 90). You will be
notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress,
proceed as follows.
1. Press
to answer the incoming call.
The first call is automatically put on hold.
2. If you want to switch between the two calls,
press the Swap soft key.
If you want to end a held call, press the Options
soft key and select the End held option.
3. To end the current call, press
.
48
In -Ca ll Op t io n s
Making a Multiparty Call
A multiparty call is a network service that allows
up to six people to take part simultaneously in a
multiparty or conference call. For more information,
contact your service provider.
Setting up the Multiparty Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The
first call is automatically put on hold.
3. To join the first participant to the multiparty call,
press the Options soft key and select the Join
option.
4. To add a new person to the multiparty call, call
the person in the normal way, then press the
Options soft key and select the Join option.
You can add incoming callers by answering the call
and pressing Options, followed by Join. Repeat as
required.
Having a Private Conversation With One
Participant
1. Press the Options soft key and choose the
Select one option.
The list of call participants appears.
49
In -Ca ll Op t io n s
2. Highlight the required person, by pressing the
soft key (or the
phone), followed by
and keys on the side of the
.
3. Select Private.
Now you can talk privately with that person. The
other participants can continue to converse with
each other.
4. To return to the multiparty call, press the Options
soft key and select Join.
All the multiparty call participants can now hear
each other.
Dropping One Participant
1. Press the Options soft key and choose the
Select one option.
The list of call participants appears.
2. Highlight the required person, by pressing the
soft key (or the
and keys on the left side of
the phone), followed by
.
3. Select Remove.
The call is ended with that participant, but you
can continue to talk with the other participants.
4. End the multiparty call by closing the flip cover or
pressing
.
50
In -Ca ll Op t io n s
Muting/ Sending Key Tones
These options allow you to turn the key tones off or
on.
If the Mute keys option is selected, your phone
does not transmit the key tones. It allows you to
press keys without hearing annoying key tones
during a call.
Note: To communicate with answering machines or
computerised telephony systems, the Send
keys option must be selected.
Using the SMS Service
If you receive an SMS (Short Message Service)
message during a call, the message icon (
flashes in the display.
)
After you have finished your call, you can read to the
message; refer to page 63 for further details.
51
Using the Menus
A three-level menu structure is available to set the
various options available on your phone. You can
select the menu options in two different ways.
Using the Soft Keys
The two soft keys are used as follows.
Key
Purpose
Left soft key
Enters the menu structure.
Selects the option displayed.
Right soft key
Moves to the next option on the
same level as the one displayed.
You can also use the and keys on the left side
of the phone to move to the next or previous option
on the same level as the one displayed.
Example: Connecting to your Voice Mail.
1. Press the Menu soft key.
2. Select the Quick Access option by pressing the
Select soft key.
3. Confirm that you wish to connect to your Voice
Mail by pressing the OK soft key.
You are automatically connected to your Voice Mail.
For a more detailed description of the Voice Mail
feature, refer to page 58.
52
Us in g t h e Me n u s
Using the Index System
Each menu option is assigned a hierarchical number.
You can use this number to access the corresponding
option directly. Simply press the Menu soft key and
key in the required number.
Example: Connecting to your Voice Mail.
1. Press the Menu soft key.
2. Enter 1 1.
You are automatically connected to your Voice Mail.
The numbers assigned to each option are indicated
on the following menu map.
53
Us in g t h e Me n u s
Menu Map
The following illustration shows the menu structure
available and indicates the:
• Number assigned to each option
• Page on which you can find a description of each
feature
* You can see menu 0, if your SIM card supports
SIM Application Toolkit. This is a network
feature. Please contact your sevice provider for
more information.
1. Quick Access
Page 58
Page 60
1-1 Connect to Voice Mail
1-2 Voice Server Number
1-3 Service Directory
2. Call Records
2-1 Missed Calls
2-2 Received Calls
2-3 Dialled Calls
2-4 Call Time
2-4-1 Last Call Time
2-4-2 Total Sent
2-4-3 Total Received
2-4-4 Reset Timers
2-5 Call Cost
2-5-1 Last Call Cost
2-5-2 Total Cost
2-5-3 Max Cost
2-5-4 Reset Counters
2-5-5 Set Max Cost
2-5-6 Price/Unit
54
Us in g t h e Me n u s
3. Text Messages
Page 63
3-1 Read Messages
3-2 Write Messages
3-3 Preset Message List
3-4 Setup
3-4-1 Service Center
3-4-2 Default Type
3-4-3 Default Validity
3-5 Broadcast
3-5-1 Read
3-5-2 Receive
3-5-3 Channel List
3-5-4 Language
4. Voice Memo
Page 69
Page 71
4-1 Voice Memo Record
4-2 Voice Memo Replay
4-3 Voice Memo Delete One
4-4 Voice Memo Delete All
5. Sound Settings
5-1 Ring Tone
5-2 Ring Volume
5-3 Alert Type
5-4 Keypad Tone
5-5 Message Tone
5-6 Error Tone
5-7 Minute Minder
5-8 Connect Tone
55
Us in g t h e Me n u s
6. Phone Settings
Page 74
6-1 Greeting Message
6-2 Own Number
6-3 Language
6-3-1 Text Language
6-3-2 Voice Language
6-4 Any-key Answer
6-5 Backlight
6-6 Service Light
6-7 Auto Redial
6-8 Auto Answer
6-9 Caller ID
6-0 Active Flip
6- Reset Settings
*
7. Clock Settings
Page 79
Page 82
7-1 Set Time
7-2 Set Date
7-3 Alarm
7-4 World Time
8. Security
8-1 PIN Check
8-2 Change PIN
8-3 Phone Lock
8-4 Change Password
8-5 SIM Lock
8-6 FDN Mode
8-7 Change PIN2
56
Us in g t h e Me n u s
9. Network Services
Page 86
9-1 Call Diverting
9-1-1 Divert Always
9-1-2 Busy
9-1-3 No Reply
9-1-4 Unreachable
9-1-5 Cancel All
9-2 Call Barring
9-2-1 All Outgoing
9-2-2 International
9-2-3 International except to home
9-2-4 All Incoming
9-2-5 Incoming while abroad
9-2-6 Cancel All
9-2-7 Change Barring Password
9-3 Call Waiting
9-3-1 Voice Calls
9-3-2 Fax Calls
9-3-3 Data Calls
9-3-4 Cancel All
9-4 Network Selection
9-4-1 Network Select
9-4-2 Preferred List
9-5 Line Identification
9-6 Closed User Group
Activate CUG
(or)
9-6-1 Deactivate
9-6-2 Index List
9-6-3 Outside Access
9-6-4 Default Group
57
Quick Access
This menu provides you with a quick way of accessing
your voice mailbox (if provided by your network).
Note: Voice Mail is a network feature. Please contact
your service provider for more information.
Connect to Voice Mail
Menu 1-1
Before using this feature, you must enter the voice
server number obtained from your service provider
(see menu 1-2). You can then select this option and
simply press the OK soft key to listen to your
messages.
Voice Server Number
Menu 1-2
You can change the voice mail server number.
To...
Then press the...
Enter the server
number
Corresponding number
keys.
Recall a number in
the phonebook
PhoneBook soft key.
Correct a digit
C key.
58
Qu ic k Ac c e s s
To...
Then press the...
soft key.
Move the cursor to
the left without
clearing the digit
Note: See page 36 for instructions on how to use the
phonebook.
Service Directory
Menu 1-3
If your SIM contains Service Dialling Numbers (SDN),
this menu enables you to view the Service Directory
and make calls from it.
59
Call Records
Via this menu, you can view the phone calls:
• Missed
• Received
• Made
The number and name (if available) are given,
together with the date and time at which the call
was made. You can also view call times and costs.
Note: The number of items in these lists depends on
the capacity of your SIM card.
Missed Calls
Menu 2-1
This option lets you view the last 10 unanswered
calls. You can also:
• Edit the number if available and dial it or save it
in the phonebook
• Delete the number from the list
Received Calls
Menu 2-2
This option lets you view the last 10 phone calls
received. You can also:
• Edit the number if available and dial it or save it
in the phonebook
• Delete the number from the list
60
Ca ll Re c o rd s
Dialled Calls
Menu 2-3
This option lets you view the last 10 numbers dialled.
You can also:
• Edit the number and save it in the phonebook
• Redial the number
• Delete the number from the list
Call Time
Menu 2-4
This option lets you view the timers for calls made
and received. The following timers are available.
Last Call Time: length of the last call.
Total Sent: total length of all calls made since the
timer was last reset.
Total Received: total length of all calls received
since the timer was last reset.
You can use the Reset Timers option to reset the
call timers; you must first enter the phone password
(see page 22) and then press the OK soft key.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes, and so forth.
61
Ca ll Re c o rd s
Call Cost
Menu 2-5
This network feature lets you view the cost of calls.
The following options are available.
Last Call Cost: cost of the last call made.
Total Cost: total cost of all calls made since the cost
counter was last reset. If the total cost exceeds the
maximum cost set via the Set Max Cost option, you
can no longer make any calls until you reset the
counter.
Max Cost: maximum cost set via the Set Max
Cost option (see below).
Reset Counters: option used to reset the cost
counter; you must first enter your PIN2 (see page 24)
and then press the OK soft key.
Set Max Cost: option used to enter the maximum
cost that you authorise for your calls.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls.
62
Text Messages
The SMS (Short Message Service) function is a
network service and may not be supported by your
network. Messages can be sent by fax, E-mail, ERMES
or X.400 messaging systems, provided that these
services are supported by your network. To send text
messages by phone, you must obtain the number of
the SMS centre from your service provider.
When the
icon appears, you have received new
text messages. If the message memory is full, an
error message is displayed and you cannot receive
any new messages. Use the Delete option in the
Read Messages menu (3-1) to delete obsolete
messages.
Read Messages
Menu 3-1
When the Read Messages option is selected, the
header of the first message is displayed:
• Message number
• Message status (New, Old, Not Sent, Sent)
To view this message, press the View soft key. The
screen shows the:
• Sender’s phone number (if sent with the message)
• Date and time at which the message was received
• Message text
To scroll through the messages, press the
or the key on the left side of the phone.
soft key
63
Te xt Me s s a g e s
You can choose the following options, by pressing
the Options soft key.
Text Reply: allows you to reply by sending a text
message. You can also:
• Change the SMS centre number (if required)
• Send the message
• Save and send the message
• Save but not send the message
Call back: allows you to call the sender back.
Delete: allows you to delete obsolete messages.
Cut Number: allows you to extract a number from
the message text, so that you can call the number or
save it in the phonebook.
Send: allows you to send a message that you have
not already sent.
Send again: allows you to resend a message that
you have already sent.
Note: The options available vary, depending on the
message status (New/Old, Not Sent, Sent).
Write Messages
Menu 3-2
Via this menu, you can write text messages of up to
160 alphanumeric characters.
Note: For further information on how to enter the
characters in your message, refer to page 37.
64
Te xt Me s s a g e s
After you complete the message, you can select the
following options.
Send Only: allows you to:
• Enter the required destination
• Enter or change the SMS centre number
• Select the message format (Text, Voice, or Fax)
• Set the time period for which the message is
stored at the message centre while attempts are
made to deliver it
Save and Send: allows you to save a copy of the
message and then send the message to the required
destination. You can read the message using the
Read Messages option. ‘Sent’ is displayed when
you read the message to indicate the message state.
Save Only: allows you to save the message so that
it can be sent later. When you read the message,
‘Not Sent’ is displayed.
Preset Message List
Menu 3-3
Using this menu, you can preset up to five messages
that you use most frequently. This menu shows the
preset message list. Scroll through the list using the
soft key. When the required message number
appears, press the Options soft key.
65
Te xt Me s s a g e s
The following options are available.
Edit: allows you to write a new message or edit the
selected preset message.
Note: For further information on how to enter the
characters in your message, refer to page 37.
Send Message: allows you to recall the selected
preset message. Once you have completed the
message, you can send, save and send, or simply save
it.
Delete: allows you to delete the selected preset
message.
Setup
Menu 3-4
Via this menu, you can set up default information on
the SMS feature.
Service Center: allows you to store or change the
number of your SMS centre required when sending
text messages. You must obtain this number from
your service provider.
Default Type:allows you to set the default message
type (Text, Voice, Fax, X.400, Email, and ERMES). The
network can convert the message into the selected
format.
66
Te xt Me s s a g e s
Default Validity: allows you to set the default time
period for which your messages are stored in the
SMS centre while attempts are made to deliver
them.
Possible values are one hour, six hours, 24 hours, one
week and the maximum authorised by your service
provider.
Broadcast
Menu 3-5
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately they are
received, provided that:
•
•
•
The phone is in the idle mode
The Receive option is set to Enable
The message channel is currently active in the
channel list
If the message is long, press the key on the left
side of the phone one or more times.
The last five messages are also stored for later
retrieval. Please contact your service provider for
more information.
The following options are available.
Read: lets you view the first message. Scroll through
the message using the
soft key. At the end of the
message, press the Next soft key to move to the
next message.
67
Te xt Me s s a g e s
Receive: allows you to Enable or Disable the
reception of broadcast messages.
Channel List: lists all available channels. The
channels currently selected are indicated by an
asterisk ( ) beside the name. When you select one of
*
them, you can edit, enable (or disable) or delete the
channel.
The Enter Channel option allows you to add a new
channel to the channel list. Enter the appropriate
channel ID obtained from your service provider, and a
title for the channel.
Language: allows you to select your preferred
language for the cell broadcast message display.
68
Voice Memo
You can use the Voice Memo feature to:
• Record up to four voice memos
• Play the recorded voice memos
• Delete one or all voice memos
Voice Memo Record
Menu 4-1
This option allows you to record a memo. The screen
displays the:
• Memo location
• Date and time when the memo is recorded
• Recording time counter
The maximum recording time is about 35 seconds.
If you want to record for longer, press the Continue
soft key. Split appears instead of Continue. You can
continue recording and the rest of the memo is stored
in the next memo location.
To stop recording, press the Stop soft key.
Note: If all memo locations are full, you must delete
an old memo before recording a new one.
69
Vo ic e Me m o
Voice Memo Replay
Menu 4-2
This option allows you to play back all memos
recorded, starting with the most recent memo. The
screen displays the:
• Memo location
• Date and time when the memo was recorded.
To...
Then press the...
Skip soft key.
Stop soft key.
Skip to the next memo
Stop the playback
Voice Memo Delete One
Menu 4-3
This option allows you to delete a specific memo. All
memos recorded are played back, starting with the
most recent one.
To...
Then press the...
Delete the memo being
played
Delete soft key.
Skip to the next memo
Next soft key.
Voice Memo Delete All
Menu 4-4
This option allows you to delete all memos. Press the
OK soft key to confirm.
70
Sound Settings
You can use the Sound Settings feature to customise
various settings, such as the:
• Ringing tone, volume and type
• Sounds made when you press a key, make an
error or receive a message
Ring Tone
Menu 5-1
This option allows you to select the required ringing
tone. You can choose between eleven different
tones. Each time you select a tone, it is played for a
few seconds.
Ring Volume
Menu 5-2
This option allows you to adjust the ringing volume
to one of five levels. Use the and keys on the
left side of the phone. The greater the number of
bars, the greater the volume.
Alert Type
Menu 5-3
This option allows you to indicate how you are to be
informed of any incoming calls. The following options
are available.
Light only: only the backlight is switched on; the
phone neither rings nor vibrates.
71
S o u n d S e t t in g s
Melody: the phone rings using the ringing tone
selected via menu option 5-1.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone both rings and vibrates.
If you hold down the key on the left side of the
phone when the phone is in the idle mode, the alert
type (except for vibration) set via this option quickly
switches to the vibration mode. If the vibration mode
is already set, it switches to the melody mode. To
select other alert types, set the appropriate option.
Keypad Tone
Menu 5-4
This option allows you to select the tone that the
keypad generates when you press a key. The
following options are available.
Tone: each key, when pressed, makes a different
sound.
Beep: each key, when pressed, makes the same
sound.
OFF: the keys do not make any sound.
Message Tone
Menu 5-5
This option allows you to select how the phone
informs you that a new message has been received.
The following options are available.
Single Tone: the phone beeps once.
72
S o u n d S e t t in g s
Periodic: the phone beeps at regular intervals.
Light Only: the service light on the top of the phone
flashes.
Error Tone
Menu 5-6
This option allows you to select how the phone
informs you that you have made a mistake. The
following options are available.
ON: the phone beeps to indicate an invalid entry.
OFF: the phone does not beep.
Minute Minder
Menu 5-7
This option allows you to specify whether the phone
must beep every minute during an outgoing call to
keep you informed of the length of your call. The
following options are available.
ON: the phone beeps every minute.
OFF: the phone does not beep.
Connect Tone
Menu 5-8
This option allows you to specify whether the phone
must beep when the phone connects to the network.
The following options are available.
ON: the phone beeps when your call is accepted.
OFF: the phone does not beep.
73
Phone Settings
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed via the Phone Settings menu.
Greeting Message
Menu 6-1
This option allows you to set a greeting message to
be displayed briefly when the phone is switched on.
The current message is displayed.
To...
Then press the...
Clear the existing message
C key and hold it
down until the message
is cleared.
Enter a new message
Appropriate
alphanumeric keys.
Change from upper case
to lower case characters
and vice versa
Case soft key.
For more information on entering characters, refer to
page 37.
Own Number
Menu 6-2
This menu displays your phone number and allows
you to edit it.
74
P h o n e S e t t in g s
To...
Then press the...
Enter the international
prefix (+)
0 key and hold it
down until the + is
displayed.
Correct a digit
C key.
Clear the whole number
C key and hold it
down until the
number is cleared.
Move the cursor left without
clearing the digits
soft key.
Move the cursor right
key on the left
of the phone.
Language
Menu 6-3
You can select a different setting for the text language
(option 6-3-1) and voice language(option 6-3-2). When
the language option is set to Automatic, the language
is automatically selected according to the language of
the SIM card used.
Any-key Answer
Menu 6-4
Depending on the setting of the Any-key Answer
option, you can answer an incoming call by pressing
any key except
and the Reject soft key.
To reject the call, press
or the Reject soft key.
If this option is set to OFF, use
or on the left
side of the phone to reject the call.
75
P h o n e S e t t in g s
The following options are available.
ON: you can press any key except
and Reject.
OFF: you can only press the
or Accept keys.
Backlight
Menu 6-5
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off. The
following options are available.
Short: the backlight comes on when you press a key
or receive a call and switches off 10 seconds after
the last key is pressed.
Long: the backlight comes on when you press a key
or receive a call and switches off 20 seconds after
the last key is pressed.
OFF: the backlight is not used.
Service Light
Menu 6-6
This option allows you to select whether or not the
service light on the top of the phone is used. The
following options are available.
ON: the service light flashes when the phone is
ready for use.
OFF: the service light is not used.
76
P h o n e S e t t in g s
Auto Redial
Menu 6-7
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
Note: The interval between two call attempts varies.
The following options are available.
ON: the number is redialled automatically.
OFF: the number is not redialled.
Auto Answer
Menu 6-8
With the Auto Answer function, the phone auto-
matically answers calls after 3, 5 or 10 seconds. You
can also turn this feature off.
Note: This feature is only available when the phone
is connected to a car kit (optional).
Caller ID
Menu 6-9
You can prevent your phone number from being
displayed on the phone of the person being called.
Note: Some networks do not allow the user to
change this setting.
The following options are available.
Default: the default setting provided by the network
is used.
77
P h o n e S e t t in g s
Hide Number: your number is not displayed on the
other person’s phone.
Send Number: your number is sent each time you
make a call.
Active Flip
Menu 6-0
The voice dial mode can be activated automatically
whenever the flip cover is opened.
The following options are available.
ON: the voice dial mode is activated when you open
the flip cover.
OFF: the voice dial mode must be activated manually
via the phonebook; for further information, refer to
page 42.
Reset Settings
Menu 6-
*
You can easily reset your phone to its default
configuration. To do so, proceed as follows.
1. Select the Reset Settings option.
2. Enter the 4-digit phone password.
Note: The password is preset to 0000. To change this
password, refer to page 84.
78
Clock Settings
The Clock Settings feature enables you to:
• Set the current date and time
•
Set the alarm so that the phone rings at a specific
time (to remind you of an appointment for example)
• Find out what time it is in various cities around
the world
Set Time
Menu 7-1
The option allows you to change the time displayed,
using the 24-hour system.
Note: Before setting the time, you must specify your
time zone, via the World Time menu option (7-4).
Set Date
Menu 7-2
The option allows you to change the date displayed.
Enter the day, month and year.
Alarm
Menu 7-3
The option allows you to set the alarm to ring at a
specific time.
The following options are available.
Daily Alarm: the alarm rings every day at the same
time.
79
Clo c k S e t t in g s
Once Alarm: the alarm rings only once and is then
deactivated.
Weekly Alarm: the alarm rings every week on the
same day and at the same time.
To set the alarm, proceed as follows.
1. Select Set Alarm.
2. Choose the alarm frequency option.
3. If you choose Weekly Alarm, select the required
day of the week and press the key. The symbol
*
*
appears to indicate that the day is selected.
To remove it, press #.
You can set more than one day.
4. When you have selected all the days required,
press OK.
5. Enter the required time.
6. Press OK.
Alarm Activated is displayed.
To stop the alarm when it rings, simply open the flip
cover.
To deactivate the alarm, select Remove Alarm.
Note: If no battery is attached to the phone when the
alarm is to ring or the battery is discharged, the
alarm does not ring. A daily or weekly alarm
remains, however, activated and will ring when
next triggered, provided that the phone is
powered by a battery.
80
Clo c k S e t t in g s
World Time
Menu 7-4
You can use your phone to check the current time in
21 major cities around the world. Scroll through the
cities using the
soft key.
The screen shows the:
• City name
• Current date and time
• Time difference between the selected city and
your city if you have set the local time (see below
for further details) or GMT (by default)
To select the time zone in which you are located,
proceed as follows.
1. Select the city corresponding to your time zone by
pressing the
soft key one or more times.
The local date and time are displayed.
2. Press the Set soft key.
3. To...
Update the current
Then press the...
Set Local soft key.
date/time with this
new setting
Indicate that the
Set DST soft key.
time zone is currently A bullet (• ) is shown
using the daylight
saving time
next to the time
difference.
Indicate that the
Remove DST soft key
time zone is no longer (only available when a
using the daylight
saving time
bullet (• ) is shown next
to the time difference).
81
Security
The Security feature enables you to restrict the use
of your phone to:
• The people of your choice
• The types of calls of your choice
Various codes and passwords are used to protect the
features of your phone. They are described in the
following sections (see also pages 21-24).
PIN Check
Menu 8-1
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Any person who does not have your PIN cannot,
therefore, use your phone without your approval.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
To change your PIN, refer to menu option 8-2 opposite.
The following options are available.
Enable: you must enter the PIN each time the phone
is switched on.
Disable: the phone connects directly to the network
when you switch it on.
82
S e c u rit y
Change PIN
Menu 8-2
This feature allows you to change your current PIN
toa new one, provided that the PIN Check feature is
enabled. You must enter the current PIN before you
can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone Lock
Menu 8-3
When the Phone Lock feature is enabled, the phone
is locked and you must enter the 4-digit phone
password each time the phone is switched on.
The password is factory set to 0000. To change the
phone password, refer to menu option 8-4 on the
following page.
Once the correct password has been entered, you
can use the phone until you switch it off.
The following options are available.
Enable: you are required to enter the phone
password when you switch the phone on.
Disable: you are not asked to enter the phone
password when you switch the phone on.
83
S e c u rit y
Change Password
Menu 8-4
The Change Password feature allows you to change
your current phone password to a new one. You must
enter the current password before you can specify a
new one.
The password is factory set to 0000. Once you have
entered a new password, you are asked to confirm it
by entering it again.
SIM Lock
Menu 8-5
When the SIM Lock feature is enabled, your phone
only works with the current SIM. You must enter the
SIM lock code.
Once you have entered the lock code, you are asked
to confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock code.
FDN Mode
Menu 8-6
The FDN(Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
84
S e c u rit y
The following options are available.
Enable: you can only call phone numbers stored in
the phonebook. You must enter your PIN2.
Disable: you can phone any number.
Note: Not all SIM cards have a PIN2. If your SIM
card does not, this menu option is not
displayed.
To change your PIN2, refer to menu option 8-7 below.
Change PIN2
Menu 8-7
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked to
confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM
card does not, this menu option is not
displayed.
85
Network Services
These menu functions are network services.
Please contact your service provider to check their
availability and subscribe to them, if you so wish.
Call Diverting
Menu 9-1
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to divert your business calls
to a colleague while you are on holiday.
Call diverting can be set up in the following ways.
Divert Always: all calls are diverted.
Busy: calls are diverted if you are already making
another call.
No Reply: calls are diverted if you do not answer the
phone.
Unreachable: calls are diverted if you are not in an
area covered by your service provider.
Cancel All: all call diverting options are cancelled.
You can specify individual diverting options for each
of the following call types:
• Voice calls only
• Fax calls only
• Data calls only
Example: You can:
• Systematically divert fax calls to your
office fax machine
• Divert voice calls to your colleague if
you are already using the phone
86
Ne t w o rk S e rv ic e s
To set your call diverting options, proceed as follows.
1. Select the type of call diverting required by
pressing
until the appropriate option is
highlighted, and then press Select.
2. Select the type of calls to be diverted by pressing
until the appropriate option is highlighted and
then press Select.
3. Press the Activate soft key to confirm your settings.
4. You can enter the number of your choice.
To enter the international code, press 0 until the
+ sign is displayed. You can also select a number
in the phonebook or the voice server number, by
pressing the Options soft key, followed by
PhoneBook or Voice Server Number.
When you are satisfied, press the Send or OK
soft key; the phone sends your setting to the
network and the network’s acknowledgement is
displayed.
To deactivate specific call diverting settings, proceed
as follows.
1. Select the call diverting option to be deactivated.
2. Select the type of call to which this option applies.
3. Press the Remove soft key.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all call diverting settings by
selecting the Cancel All option.
87
Ne t w o rk S e rv ic e s
Call Barring
Menu 9-2
The call barring network service allows you to
restrict your calls.
Call barring can be set up in the following ways.
All Outgoing: calls cannot be made.
International: international calls cannot be made.
International except to home: when abroad, calls
can be made only to numbers within the current
country and to your home country, that is the country
where your home network provider is located.
All Incoming: calls cannot be received.
Incoming while abroad: calls cannot be received
when you are using your phone outside your home
service area.
Cancel All: all call barring settings are deactivated;
calls can be made and received normally.
To set your call barring options, proceed as follows.
1. Select the type of call barring required by
pressing
until the appropriate option is
highlighted and then press Select.
2. Select the type of calls to be barred by pressing
until the appropriate option is highlighted and
then press Select.
3. Press the Activate soft key to confirm your
settings.
88
Ne t w o rk S e rv ic e s
4. Enter your call barring password supplied by your
service provider.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
To deactivate specific call barring settings, proceed
as follows.
1. Select the call barring option to be deactivated.
2. Select the type of call to which this option applies.
3. Press the Remove soft key.
4. Enter your call barring password supplied by your
service provider.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all call barring settings by
selecting the Cancel All option.
Change Barring Password: you can set and
change the call barring password obtained from your
service provider using this option. You must enter the
current password before you can specify a new one.
Once you have entered a new password, you are
asked to confirm it by entering it again.
89
Ne t w o rk S e rv ic e s
Call Waiting
Menu 9-3
This network service enables you to be informed
when someone is trying to reach you during another
call.
To set your call waiting options, proceed as follows.
1. Select the type of calls to which the call waiting
option is to be applied by pressing
until the
appropriate option is highlighted and then press
Select.
2. Press the Activate soft key to confirm your
settings.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
To deactivate specific call waiting settings, proceed
as follows.
1. Select the type of call to which the option applies.
2. Press the Deactivate soft key.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all call waiting settings by
selecting the Cancel All option.
90
Ne t w o rk S e rv ic e s
Network Selection
Menu 9-4
The Network Selection feature enables you to:
• Indicate whether the network used when roaming
(outside your home area) is selected automatically
or manually
• Set up a preferred list to be used when selecting
a network automatically
Note: You can select a network other than your
home network only if it has a valid roaming
agreement with your home network.
To indicate whether the network is to be selected
automatically or manually when roaming, proceed as
follows.
1. When Network Select is displayed, press the
OK soft key.
2. Press the
soft key until the appropriate option
is highlighted and press OK.
If you select Automatic, you are connected to the
first available network in the preferred list when
roaming.
If you select Manual, the phone scans for the
available networks. Go to Step 3.
3. Press the
soft key until the preferred network
is highlighted and press OK.
You are connected to that network when roaming.
91
Ne t w o rk S e rv ic e s
Preferred List: allows you to list your preferred
networks to be used when roaming. Your phone uses
the networks in order of appearance in this list,
provided that the network is available.
When you select this option, the current preferred
list is displayed if it already exists (see the procedure
below). Otherwise, the list of available networks is
displayed directly (see Step 2).
1. To...
Then press the...
Scroll through
soft key.
the preferred list
Change an entry in
the preferred list
soft key to highlight the
required entry, followed by
the Edit soft key.
2. Select the network to be added to the list by
pressing the soft key until it is highlighted,
followed by Select.
The network is added to the list.
92
Ne t w o rk S e rv ic e s
Line Identification
Menu 9-5
This menu option lets you view the following line
identification settings.
CLIP (Calling Line Identification Presentation) /
COLP (Connected Line Identification Presentation)
If these network functions are active, the caller’s
number is displayed during a call. If the phone
number matches one stored in the phonebook, the
caller’s name is also displayed.
CLIR (Calling Line Identification Restriction) /
COLR (Connected Line Identification Restriction)
If these network functions are active, your phone
number is not displayed on the called person’s phone.
Closed User Group (CUG)
Menu 9-6
This network service allows incoming and outgoing
calls to be restricted to a selected user group. You
may be a member of up to 10 user groups.
For details on how to create, activate and use a
closed user group, contact your service provider.
Example: A company lends SIM cards to its employees
and wants to restrict outgoing calls to
members of the same team.
93
Ne t w o rk S e rv ic e s
Activating a Closed User Group
If you select the Closed User Group menu, you are
asked if you want to activate the CUG function. Press
the Yes soft key. You can now access the following
options.
Deactivate: deactivates the CUG function.
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears.
Add a new CUG index (as advised by your service
provider) or delete a selected group.
To...
Then press the...
Scroll through the
existing CUG indexes
or keys on the left
of the phone.
Add a new CUG index
Delete a CUG index
Add soft key and enter
the index.
Delete soft key.
Outside Access: enables you to allow or prohibit
calls to numbers other than those nominated for the
Closed User Group. This feature depends on the
nature of your CUG subscription. Please check with
your service provider.
Default Group: you may communicate a default
CUG to your service provider. If you have done so,
you can enable the Default Group option on your
phone. When making a call, you will be given the
option of using your default CUG, instead of
selecting one from the list.
94
Solving Problems
Before contacting the after-sales service, perform the
following simple checks. They may save you the time
and expense of an unnecessary service call.
When you switch your phone on, the following
messages appear
Insert SIM Card
• Check that the SIM card is correctly installed.
Phone Locked
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
• The option requiring that the PIN be entered each
time the phone is switched on was enabled. You
must enter your PIN and then disable this option if
so required.
Enter PUK
• The PIN code was entered wrongly three times in
succession and the phone is now blocked. Enter
the PUK supplied by your network operator.
95
S o lv in g P ro b le m s
“No service” is displayed
• The network connection was lost. You may be in a
weak reception area (in a tunnel or surrounded by
buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
You have entered a number but it was not dialled
• Have you pressed the
key?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Your correspondent cannot reach you
• Is your phone switched on (
more than one second)?
pressed for
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
Your correspondent cannot hear you speaking
• Have you switched off the microphone (Mute
appears)?
• Are you holding the phone close enough to your
mouth? The microphone is located in the bottom
centre of the phone.
96
S o lv in g P ro b le m s
The phone starts beeping and “**Warning**
Battery Low” flashes in the display
• The battery is insufficiently charged. Replace the
battery and recharge it.
The audio quality of the call is poor
• Check the signal strength indicator in the display
(
); the number of bars after it indicates the
signal strength from strong ( ) to weak ( ).
• Try extending the antenna, moving the phone
slightly or moving closer to a window if you are in
a building.
No number is dialled when you recall a
phonebook entry
• Check that the numbers have been stored
correctly, by using the Phonebook Search feature.
• Re-store them, if necessary.
If the above guidelines do not enable you to solve
the problem, take a note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or SAMSUNG
after-sales service.
97
Using the Batteries
Your phone is powered by a rechargeable Li-ion
standard battery.
The following batteries are also available (ask your
SAMSUNG dealer for further details):
– BTI24G slim battery
– BTS24G standard battery
– BTE24G extended battery
– BTL24G ultra extended battery
Precautions When Using Batteries
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby times
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging times depend on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time
to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
98
Us in g t h e Ba t t e rie s
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-approved
chargers. When a charger is not in use, disconnect
it from the power source. Do not leave the battery
connected to a charger for more than a week,
since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and life-time of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental short
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and - terminals of the battery (metal strips
on the back of the battery), for example when
you carry a spare battery in a pocket or bag.
Short-circuiting the terminals may damage the
battery or the object causing the short-circuit.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
99
Safety Information
Road Safety
• Remember, road safety always comes first!
• Do not use a hand-held phone while driving a
vehicle. Always park the vehicle before having a
conversation.
• Make sure that the phone is stored safely and will
not fall or be broken in the event of a collision or
emergency stop.
• The use of an alert device to operate a vehicle’s
lights or horn on public roads is not permitted.
• Only qualified personnel should install or service
the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the unit.
• Electronic fuel injection, anti-skid braking,
electronic cruise control or any other electronic
systems may malfunction due to the lack of
protection from radio signals. Check regularly that
all cellular phone equipment in your vehicle is
mounted and operating correctly.
Operating Environment
• Remember to follow any special regulations in
force in any area and always switch off your
100
S a f e t y In f o rm a t io n
phone whenever it is forbidden to use it, or when
it may cause interference or danger (in a hospital
for example).
• Operation of any radio transmitting equipment,
including cellular phones, may interfere with
inadequately protected medical devices. Consult
a physician or the manufacturer of the medical
device if you have any questions. Other electronic
equipment may also be subject to interference.
• As with other mobile radio transmitting equipment,
you are advised that for satisfactory operations
and personal safety, the equipment should only be
used in the normal operating position.
• Always switch off the phone when at a refuelling
point (service station). You are reminded of the
need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and
distribution areas), chemical plants or where
blasting operations are in progress.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• Switch off your cellular phone when in an aircraft.
The use of cellular phones in an aircraft is illegal
and may be dangerous to the operation of the
aircraft or disrupt the cellular network. Failure to
observe these instructions may lead to the
suspension or denial of cellular telephone
services to the offender, legal action or both.
101
S a f e t y In f o rm a t io n
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill the warranty
obligations and enjoy this product for many years.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and
liquids containing minerals will corrode the
electronic circuits.
• Do not use or store the phone in dusty, dirty areas
as its components may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up (to its normal temperature),
moisture can form inside the phone, which may
damage the electronic circuits.
• Do not attempt to open the phone. Non-expert
handling of the phone may damage it.
• Do not drop or knock the phone. Rough handling
may damage the internal circuits.
102
S a f e t y In f o rm a t io n
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with
a soft cloth slightly dampened in mild, soapy water.
• If the phone or any of its accessories are not
working properly, take them to your nearest
qualified service centre. The personnel there will
assist you, and if necessary, arrange for the phone
to be repaired.
Emergency Calls
Important!This phone, like any cellular phone, uses
radio signals, cellular and landline
networks, as well as user-programmed
functions that cannot guarantee
connection in all conditions. Therefore,
you should never rely solely on any
cellular phone for essential communi-
cations (medical emergencies for example).
Remember, to make or receive any calls, the phone
must be switched on and in a service area with
adequate cellular signal strength.
Emergency calls may not be possible on all cellular
phone networks or when certain network services
and/or phone features are in use. Check with local
cellular service providers.
103
Glossary of Terms
To help you understand the main technical terms and
abbreviations used in this booklet and take full
advantage of the features on your mobile phone, here
are a few definitions.
Active Flip
Ability to voice dial immediately on opening the flip
cover on the phone.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Diverting
Ability to reroute calls to another mobile or fixed line.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call Waiting
Ability to inform users that they have an incoming call
when engaged on another call.
104
Glo s s a ry o f Te rm s
GSM (Global System for Mobile Communication)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
Line Identification Services
Service allowing subscribers to view or block the
telephone numbers of callers.
Multi-party Calling
Ability to establish a conference call involving up to
five additional parties.
Phone’s Password
Security code used to unlock the phone when you
have selected the option to lock it automatically each
time it switches on.
PIN (Personal Identification Number)
Security code that protects the phone against
unauthorised use. The PIN is supplied by the service
provider with the SIM card. It may be a four to eight-
digit number and can be changed, as required.
105
Glo s s a ry o f Te rm s
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Roaming
Use of your phone when you are outside your home
area (when travelling for example).
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and memory
information, as well as the subscriber’s personal
data). The SIM card fits into a small slot on the back
of the phone and is protected by the battery.
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to speak
to the correspondent. The message created or
received (up to 160 characters long) can be
displayed, received, edited or sent.
106
Glo s s a ry o f Te rm s
Soft Keys
Keys marked ... on the phone, the purpose of which:
• Varies according to the function that you are
currently using
• Is indicated on the bottom line of the display just
above the corresponding key
Voice Mail
Computerised answering service that automatically
answers your calls when you are not available, plays
a greeting (optionally in your own voice) and records
a message.
107
Index
Changing
passwords (8-4) • 84
A
PIN (8-2) • 83
Access codes • 22
Accessories • 9
Active Flip (6-0) • 78
Alarm (7-3) • 79
Alert Type (5-3) • 71
Any-key Answer (6-4) • 75
Auto Answer (6-8) • 77
Auto Redial (6-7) • 77
PIN2 (8-7) • 85
Characters
changing case • 38
entering • 37
Charging batteries • 19
Clock Settings (7) • 79
Closed User Group (9-6) • 93
Conference calls
• See Multiparty calls
Connect to Voice
B
Mail (1-1) • 58
Backlight • 14; 76
Copying phonebook
numbers • 42
Barring
calls (9-2) • 88
Cost of calls • 62
CUG • 93
password • 25
Batteries
charging • 19
low battery indicator • 20
precautions • 98
Broadcast (3-5) • 67
Browsing the menu map • 32
D
Date setting (7-2) • 79
Deleting
all voice dial
numbers • 44
C
memos • 70
missed calls • 31
one voice dial
Caller ID (6-9) • 77
Calls
number • 43
answering • 29; 75
answering a second
call • 48
phonebook numbers • 41
voice dial names • 41
Dialled Calls (2-3) • 61
Dialling • 26
voice • 27; 42; 43
Display • 12
barring • 88
cost (2-5) • 62
dialled (2-3) • 61
diverting (9-1) • 86
emergency • 8; 103
ending • 27
icons • 13
setting the language • 34
Diverting calls (9-1) • 86
DTMF dialling • 51
holding • 47; 90
international • 26
making • 15; 26
missed • 30; 60
multiparty • 49
received (2-2) • 60
records (2) • 60
time (2-4) • 61
via the phonebook • 27
waiting (9-3) • 90
Care • 102
E
Earphone • 25
Earpiece
adjusting the volume • 28
Emergency calls • 8; 103
Error Tone (5-6) • 73
F
108
In d e x
FDN Mode (8-6) • 84
Fixed Dial Number
mode • 84
Maintenance • 102
Memos
deleting (4-3/4) • 70
recording (4-1) • 69
replaying (4-2) • 70
Menu map • 54
browsing • 32
numbers • 53
Message Tone (5-5) • 72
Messages
broadcast (3-5) • 67
greeting (6-1) • 74
preset (3-3) • 65
reading (3-1) • 63
setup (3-4) • 66
text • 63
writing (3-2) • 64
Microphone mute • 45
Minute Minder (5-7) • 73
Missed calls (2-1) • 60
deleting • 31
Functions
selecting • 32
G
Greeting Message (6-1) • 74
H
Holding calls • 47; 90
I
Icons
description • 13
text message • 51
Identifying a caller • 77
K
Key tones
editing the number • 31
viewing • 30; 60
Multiparty calls
adjusting the volume • 28
muting • 51
dropping a
participant • 50
making • 49
selecting • 72
sending • 51
Keypad Tone (5-4) • 72
Keys
location • 10
purpose • 11
private conversation • 49
Mute
key tones • 51
microphone • 45
L
N
Names
Language (6-3) • 75
setting the text • 34
Last number redialling • 27
Length of calls • 61
Letters
changing case • 38
entering • 37
searching/dialling • 38;46
storing in the
changing case • 38
entering • 37
phonebook • 36
Network Selection (9-4) • 91
Network Services (9) • 86
Line Identification (9-5) • 93
Locking
phone (8-3) • 83
SIM card (8-5) • 84
Low battery indicator • 20
M
109
In d e x
Numbers
PIN • 23
changing (8-2) • 83
checking (8-1) • 82
PIN2 • 24
changing (8-7) • 85
Playing back
editing missed call • 31
recording voice dial • 43
recording your own • 74
searching/dialling • 38;46
storing in the
phonebook • 36
voice dialling • 42; 43
voice dial names • 40
voice dial numbers • 44
Pocket attachment • 25
Preset Message
O
Options
selecting • 32
Own Number (6-2) • 74
List (3-3) • 65
Problem solving • 95
PUK • 23
PUK2 • 24
P
Q
Password
Quick Access (1) • 58
barring • 25
changing (8-4) • 84
phone • 22
R
Pasting phonebook
numbers • 41
Recording
memos • 69
Personal Identification
Number • See PIN
Personal Unblocking
Key • 23
voice dial names • 41
voice dial numbers • 43
your own number • 74
Records
Phone
call (2) • 60
Lock (8-3) • 83
password • 22
Settings (6) • 74
Phonebook • 36
copying numbers • 42
deleting recorded
names • 44
Redialling
automatically (6-7) • 77
last number • 27
Replaying memos (4-2) • 70
Reset Settings (6- ) • 78
*
Ring Tone (5-1) • 71
Ring Volume (5-2) • 71
Roaming • 91
dialling • 38
editing numbers • 41
erasing numbers • 41
making calls • 27
pasting numbers • 41
playing recorded
names • 44
searching • 38
storing numbers/
names • 36
voice dialling • 42
voice recording • 40
S
Safety
batteries • 98
information • 100
precautions • 7
Security (8) • 82
Selecting functions/
options • 32
Sending key tones • 51
Service Directory (1-3) • 59
Service light • 14; 76
110
In d e x
Setting
alarm (7-3) • 79
U
User groups • 93
date (7-2) • 79
text language • 34
time (7-1) • 79
V
Settings
Voice dialling • 27; 43
deleting all numbers • 44
deleting one number • 43
deleting recorded
names • 41
resetting (6- ) • 78
*
Setup (3-4) • 66
SIM card
installing • 17
locking (8-5) • 84
precautions • 17
SIM Lock (8-5) • 84
SMS
playing recorded
names • 44
playing recorded
numbers • 44
setup (3-4) • 66
text message icon • 51
Soft keys • 52
Solving problems • 95
Sound Settings (5) • 71
Switching on/off • 20
recording names • 40
recording numbers • 43
Voice language
selecting • 75
Voice mail
connecting to (1-1) • 58
server number (1-2) • 58
Service Directory
(1-3) • 59
T
Text language
Voice Memo (4) • 69
Voice Memo Delete
All (4-4) • 70
Voice Memo Delete
One (4-3) • 70
Voice Memo
Record (4-1) • 69
Voice Memo
Replay (4-2) • 70
Voice Server
Number (1-2) • 58
Volume
selecting • 34; 75
Text messages • 63
broadcasting (3-5) • 67
icon • 51
preset (3-3) • 65
reading (3-1) • 63
setup (3-4) • 66
writing (3-2) • 64
Time
setting (7-1) • 79
world (7-4) • 81
Timing a call • 73
Tone
adjusting • 28
selecting the ring
(5-2) • 71
connect (5-8) • 73
error (5-6) • 73
keypad (5-4) • 72
message (5-5) • 72
ring (5-1) • 71
W
World Time (7-4) • 81
Write Messages (3-2) • 64
Travel adapter • 18
111
Installing the Flip Cover
If the flip cover is detached from the phone either
accidentally or on purpose, it can be clipped back on to
the phone.
1. Insert one end of the flip cover into the left tab on
the bottom of the phone.
2. While pushing the right tab with a small tool such as
a pen, clip the other end of the cover into place.
112
|