Your consumer package
Your consumer package contains the following items:
•
•
•
•
Samsung SCH-N370 phone with hand strap
Samsung Extended Li-Ion battery
Samsung travel adaptor
User guide
17
Getting to know your phone
Antenna
The antenna is a device for transmitting and receiving signals. The shape and
size of the antenna is determined, in part, by the frequency of the signals that
they receive. An antenna makes the call sound clearer when it is fully extended.
Use only in the normal position and do not touch the antenna unnecessarily
when the phone is active.
Backlight features
Your keypad has backlighting for easy visibility. For further information on this
feature see “Backlight” on page 87.
Clear key
The
key is used to erase/clear numbers or characters that may have
been incorrectly entered. Or, you can use it to return to a previous screen.
•
•
If you enter an incorrect number or character on the display screen,
press once briefly, to erase it.
To erase all digits or characters from the display screen, press
two seconds.
for
•
•
To back up one menu level, press
once briefly.
To return to standby mode from any menu, press
seconds.
for two
Display screen
The display screen comprises of two areas, an upper line of stationary icons,
and the lower text and graphic area.
•
The top line of icons shown on the liquid crystal display (LCD), appear
according to the phone’s operating mode. For further information see
“Turning your phone on” on page 23.
19
•
The lower area of the LCD displays in-use information, for example, the
calling party’s name and number, the call timer, Mute and Call Waiting,
menus, sub menus, etc.
End (power on/off) key
This
key is utilized in several ways:
•
Press and hold
Press and hold
Press
cancel any input.
to turn on your phone.
to turn off your phone.
•
•
once to disconnect a call, return to standby mode, or
Headset connector
This is where the optional hands-free headset is connected. The headset
includes an earbud and microphone in a convenient, lightweight unit so you
can talk without using your hands.
•
Before inserting the hands-free headset connector to your phone, gently
pry open the top of the cover to expose the headset connector.
LED indicator
The LED indicator flashes to indicate an incoming call or message. When you
have the phone ringer set to off, the LED indicator notifies you of an incoming
call or message.
•
The LED indicator lights momentarily when you power up the phone.
Menu key
Press
to enter the menu selection.
Microphone
The microphone is used for conversation and recording.
Numeric keypad
Use these keys to enter text, numbers, and special characters.
20
OK/Message key
The
key stores information that you enter, and also acts as an “OK”
button when pressed. When in standby mode,
functions as a Mail Kit
menu access key to send messages and review received messages.
Speaker
The speaker is for listening to voice conversations.
Send key
The
key performs several useful functions:
•
Press once to answer calls.
•
•
Enter a number and press
once to connect a call.
Press twice in standby mode to redial the last outgoing number.
Navigation
The Navigation key
allows you to locate different menu options by
pressing the appropriate arrow.
When in standby mode the navigation key can act as a hot key:
•
•
•
Press the left arrow to access your Calender.
Press the right arrow to access the WEB.
Press the up or down arrow to access the number in your Phone Book.
21
Adaptor outlet
Use the adaptor outlet to connect your phone to a wireless data device or a
hands-free car kit (both sold separately). The adaptor outlet is located at the
bottom of the phone.
•
To charge your battery, plug the travel adaptor that is supplied with your
phone into a wall outlet.
•
Using your thumb and first finger, gently squeeze the two buttons located
on either side of the other end of the travel adaptor and insert the
adaptor into your phone’s outlet. The yellow arrow on the travel adaptor
should be facing upwards and pointing toward the phone.
•
When you unplug the travel adaptor from your phone, squeeze these
same two buttons, and pull gently on the adaptor to disconnect it from
the phone.
22
Getting Started
Getting service
You must contact your service provider and follow their instructions for
obtaining service for your phone. We suggest that you read this user guide to
fully understand the services that your phone supports.
Turning your phone on
When you are ready to turn your phone on, fully extend the antenna for the
clearest reception. Press
. Continue to hold this key down for more than
one second to power the phone on:
Note: Your phone has a built-in antenna. As with any other radio-transmitting
device, do not touch the antenna as it affects call quality and can cause the
phone to operate at a higher power level than is necessary.
The LED indicator momentarily lights, and a power-up alert sounds. The phone
begins searching for a network signal. When a signal is found, the date, day,
and time appears. Your phone is now ready to place and receive calls.
If the phone is outside of your carriers coverage or roaming area the
icon
displays. If this happens you cannot place or receive calls. You must try later
when service becomes available. For further information see “The top line of
the display screen” on page 32
Turning your phone off
To turn your phone off, press and hold
down for more than two
seconds. Notice that when the phone is turned off, both the display screen and
the backlight remain off.
Note: If your phone is on, and
is pressed for less than one second,
the phone will not power off. This feature prevents your phone from being
turned off accidentally.
23
Several ways to answer a call
When you receive a call, the phone will ring and the phone icon
displays
on your screen. If the caller can be identified, the caller’s phone number, (or
name if pre-stored in your Phone Book) displays. If the caller cannot be
identified, only the phone icon and “Call from Unavailable No” is displayed.
For further information see “Answer mode” on page 97.
There are several ways to answer an incoming call.
•
•
•
Press
.
Press any key.
Set the Auto Answer feature.
With the Auto Answer feature you can turn enable your phone to automatically
answer a call after the ringer sounds by selecting:
•
•
•
off
after 1 sec.
after 3 sec.
•
after 5 sec.
(For further information see “Setting auto answer” on page 53.)
24
List of main and sub menus
This list displays the main menu structure and mail kit features. It shows the
individual sub menus and features assigned to each main menu option.
1:Calls
1:Outgoing
2:Incoming
3:Missed
4:Erase Logs
5:Air Time
Outgoing/Incoming/Missed/All
2:Phone Book
1:Find Name
2:Add Entry
3:Find Entry
4:RelationSrch
5:Add E-mail
3:Web
1:Start Browser
2:Prompt
None/To Start/To End/Both
4:Scheduler
1:Today
2:View Month
3:Jump To Date
4:To Do List
5:Count Down
6:World Time
7:Calculator
8:Alarm
5:Sounds
1:Ringer Vol
1:Calls
2:Alarm
2:Ringer Type
1:Voice Calls
2:Alarm
3:Data/Fax In
4:Schedule
3:Key Beep
4:Alerts
1:Minute Beep
2:Service
3:Connect
4:Disconnect
5:Fade
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
6:Roam
5:Voice Volume
6:Roam Ringer
7:Power On/Off
On/Off
On/Off
6:Display
1:Backlight
2:Banner
3:Animation
4:My Phone #
Always Off/7 Seconds/15Seconds/30 Seconds
Power On/Power Off/Idle Mode
25
5:Language
6:Set Time
7:Auto Hyphen
8:Version
English/French
On/Off
9:Menu Style
Horizontal/Vertical
7:Voice Dial
1:Record
2:Review
3:Erase All
4:Set Active
Only/Earphone
8:Games
9:Set Up
1:Flying Tight
2:Run for Money
3:Racing
1:Auto Retry
off/every 10 seconds/every 30 seconds/every
60 seconds
2:Auto Answer
3:Answer Mode
4:Tone Length
5:Set NAM
6:Set System
7:Data/Fax
off/after 1 sec/after 3 sec/after/5 sec
By any key/By send key
Long/normal
NAM 1/NAM 2
Automatic/Home only/Analog only/AMPSHome only
data-fax off/fax for next call/fax until powered off/
data for next call/data until powered off
8:Whisper Mode
0:Key Guard
On/Off
On/Off
0:Security
1:Lock Mode
2:Restrict
Never/On power up/Now
No/yes
3:Lockcode
4:Emergency #
1:911
2:*911
3:#911
5:Send PIN
6:Clear MEM
7:Reset Phone
Never/Prompt
Proceed
Proceed
Mail Kit
1:New Messages
1:Send To
PhoneBook/T9 Word/ABC/Symbol/123
2:Message
3:Call Back
4:Options
Priority/Validity/Send Later/Delivery Ack/
Message
5:Action
SEND:Send Msg/OK:File Msg/CLR:Cancel/
END:Quit
2:Voice
3:Inbox
4:Outbox
5:Filed Msg
6:WebAlert
7:Erase Msg
1:Voice
2:OldInbox
3:NewInbox
4:Outbox
5:Filed
26
6:All Messages
8:Msg Setup
1:General
1:Scroll Timer
1/2/3/4/5 seconds/Off
2:Msg. Reminder Every 2 min/Off/Once
3:MessageVolume
4:Ringer Type
1:Voice Mail
2:Page
3:Text
4:Browser Msg.
5: Voice Mail#
2:New Message
1:Callback #
2:Save Message
Auto Save/Prompt Save/Do
Not Save
3:Entry Method
4:Delivery Ack
5:Canned Msg.
0:Yes
T9/Alphabet
On/Off
1:No
2:Call me
3:Need directions
4:Where are you?
5:Will call later
6:Busy
7:On my way
8:Will arrive in 15 minutes
9:Thank you
In-Use Menu (Can be opened only when on a call)
1:Mute/Quit
2:Calls
3:Phone Book
Outgoing/Incoming/Missed/Erase Logs/Air Time
Find Name/Add Entry/Find Entry/RelationSrch/
Add E-mail
4:Silent/Quit
5:Send Tel #
6:My Phone #
7:Version
8:Send DTMF
Using your phone’s menus
Your phone offers a range of functions that allow you to tailor the phone to
your personal requirements. These functions are arranged in menus and
submenus.
The menus and submenus can be accessed by using the navigation key or using
shortcuts.
27
Accessing menus using the navigation
key
Menu options are numbered but can also be accessed by using the navigation
key. Press the
on the arrow in the direction which you wish to go. Press
right to go to the right, press down to go forward, press left to go left, and press
up to go backwards through the menu options. When your objective is
reached, press
to save or activate.
Returning to the previous menu
When using the navigation key you can return to the previous menu at anytime.
To do this:
•
•
Press
Press
to return to the previous menu.
to exit the menu without saving the setting.
Accessing menus using shortcut
numbers
All main menus, menu levels, and menu content items are assigned numbers.
All menus and their contents can be accessed using these “Shortcut” numbers.
The following steps are a sample exercise for setting the Connect tone.
1. In standby mode, press
to access the main menu.
2. Press
3. Press
4. Press
5. Press
6. Press
for Sounds.
for Alerts.
for Connect.
to highlight *On.
to save.
Note: To reset the Connect tone. Press
to highlight Off. For further
details, see “List of main and sub menus” on page 25 for numbers assigned
to each menu and sub menu item.
28
Your phone’s modes
Answer mode
With this option activated, your phone will allow you to select a specific mode
when you receive an incoming call. For further information see “Several ways
to answer a call” on page 24.
Digital mode
Some of your phones features work only in digital service areas, the
icon
indicates that your phone is operating in digital mode. If the digital icon is
absent, your phone is operating in analog mode.
Input mode
Use input mode to enter text, numbers and symbols into various screens. For
further information see “Entering text, numbers, and/or symbols” on
page 103.
Lock mode
When you lock your phone using the Lock Mode menu option, you restrict
phone usage. You can receive messages and calls, but you cannot make an
outgoing call until your phone is unlocked. You can unlock your phone, by
following the prompts and entering the lock code.
Power save mode
Your phone comes with a power save feature that automatically activates if your
phone is unable to find a signal after 15 minutes of searching. While this
feature is active, the phone’s battery charge is conserved. The phone
automatically rechecks periodically for a signal. To manually force the phone
to recheck for a signal, press any key. A message on the display screen will
inform you when your phone is operating in the power save mode.
29
Silent mode
The “Silent Mode” feature allows you to instantaneously silence the ringer
when in standby mode.
•
•
With the phone in standby mode, press and hold
for 2 seconds.
“Entering Silent Mode” displays briefly. (The silent mode icon displays
on the standby screen.)
To exit from “Silent Mode” press and hold
for 2 seconds. The
screen prompt “Exit Silent Mode” displays, and your phone automatically
reactivates the previous ringer volume setting. (The silent mode icon is
removed from the standby screen.)
Standby mode
Standby mode is the fundamental state of your phone once your phone has
found service.
Your phone goes into standby mode:
1. After you power it on.
2. When you press
if your phone is on.
When in standby mode, you will see:
1. The month/date, and time.
2.
All other active icons.
While in standby mode, enter a phone number, and press
to call.
at any time to return to standby mode, but be careful; if you are
Press
on a call when you press
disconnect your call.
, you will return to standby mode and
Messages can also be received when in standby mode, the alert tone will sound
(unless turned off), when a new message is received. The menu is accessed
when you are in standby mode by pressing
. For further details see “List
of main and sub menus” on page 25 for a listing of the menu items.
30
Talk mode
You can place and answer calls only when your phone is turned on. When you
are on a call your phone is in Talk mode. Pressing
the In-Use menu options.
will display a list of
Whisper mode
With this feature you can have semi-private conversations. You don’t have to
speak loudly. When this feature is active you can actually whisper during any
conversion.
To activate whisper mode:
1. Press
.
2. Use the navigation key to highlight yes or no.
Vibrate mode
In standby mode
1. Press the down arrow located on the left side of your phone to adjust the
ringer volume
modes.
. Your options include vibrate, beep, and off
2. When your phone vibrates, press
appears on the display.)
to save. (The vibrate icon
To change the setting
1. Press the down arrow located on the left side of your phone to adjust the
ringer volume.
2. Press
screen.
to save. The vibrate icon will be deleted from the display
31
The top line of the display screen
Display indicators (or icons) appear across the top of your phone’s display
screen. The signal strength and battery strength icons will always appear, but
other icons display based upon your phone’s operating mode.
Note: The Date, Day, and Time shown in the display illustration may not
reflect the order in which it appears on your phone.
.
Signal strength: This icon always appears when your phone is on.
It shows your current signal strength. More lines indicate more signal
strength. Four lines indicate maximum strength, and one line
indicates least strength.
Service indicator: This icon indicates a call is in progress. When
the phone is calling a number, this icon will flash until the call is
connected.
No service indicator: This icon indicates your phone cannot find a
signal because you’re outside a service area. When this is displayed,
you cannot make or receive calls. Wait a little while for a signal or
move into an open area.
Note: The no service indicator icon will always appear when you turn on your
phone. As soon as service is located, the indicator will disappear.
32
Roaming: This icon displays when your phone is outside your
service provider’s area and your phone is receiving service from
another carrier’s network.
If you are:
• In your home service area, this indicator will not display.
•In a preferred analog or digital networking area (where your
service provider has a roaming agreement in place), this indicator
will be on, but not flashing.
•In an analog or digital area that is not covered by your phone’s own
service provider, this indicator will be on.
New Message: This icon appears when a new voice, text, page or
Net alert message is received.
Digital mode: This icon indicates your phone is operating in digital
mode. Your phone has some features that work only in a digital
service area; these services include the Web Browser and certain
other message(s) services. If this icon is absent, your phone is
operating in analog mode.
Vibrate mode: This icon indicates that an incoming call will make
the phone vibrate rather than ring. This feature can be used for
situations where your ringer will not disturb others, or for “loud”
situations where you will be unable to hear the ringer.
Battery strength: This icon is always displayed when your phone is
active, it displays your battery charge level. The more black bars you
see, the greater the charge. When the battery becomes very low, a
flashing empty battery icon displays and the phone sounds an audible
alert; this indicates that your phone is about to turn itself off.
33
Other phone icons
Duplicate: This icon indicates that a duplicate message was sent.
E-mail: This icon represents an e-mail address.
Fax: This icon represents a fax number.
Filed Message: This icon displays if a message is filed.
Home: This icon indicates represents an individual’s home number.
Message: Icon displays when outgoing messages are transmitted.
Message read: This icon displays when you have read a message.
Message received: This icon indicates that an incoming text,
voicemail, page or browser message has been received.
Mobile: This icon represents a mobile phone number.
Multi: This icon displays if multi messages are successfully delivered.
No label: This icon indicates that no label exists for this entry.
Office: This icon represents an office number.
Pager: This icon represents a pager number.
Send Delivered: This icon displays if a sent message is delivered.
Send Failed: This icon displays if a message failed to be sent.
Speed dial: This icon displays when the number you wish to call is
available using the speed dial feature.
Urgent: This icon displays if a message is urgent.
Using the battery
Note: Your phone comes packaged with a partially charged, rechargeable
standard
Li-Ion battery. The phone can be used while the battery is charging, but
must be fully charged the first time you use your phone otherwise the
battery could be damaged.
34
Installing the battery
The battery attaches to the phone very easily:
1. Gently place the bottom end of the battery into the provided slots on the
underside of the phone.
2. Press the top end of the battery down(The top end of the battery displays
the word Samsung in raised letters.) until you hear it click into place.
Removing the battery
To remove the battery from your phone:
1. Turn the phone off (by pressing and holding
animation begins.)
until the closing
2. On the back side of the phone, hold the button down and push the
battery toward the bottom edge of the phone. The battery will then lift or
fall away from the phone.)
Charging the battery
Your phone is powered by a rechargeable extended Li-Ion battery. Only use
Samsung-approved adaptors and batteries. These adaptors are designed to
maximize battery life. Using other adaptors may invalidate your
warranty and may cause damage.
35
When the phone has finished charging it can be disconnected.
Low battery indicator
You can tell whether or not your battery needs to be recharged by checking the
battery indicator (this icon
is located in the upper-right corner of the
display screen). The presence of all three bars indicate a full charge. No bars
(the battery icon is empty) means your battery must be charged.
The empty battery icon
Two to three minutes before the battery charge level gets too low to operate the
phone, the battery sensor will let you know by blinking an empty battery icon
(
), and sounding a tone. If you continue to operate the phone without
charging the battery, the phone will automatically turn off. If this happens, your
wireless call will be terminated. However, if you plug into a charging device,
you can continue your call. Be sure to monitor the battery strength icon and
make certain your battery is adequately charged.
36
Caring for the battery
Protecting your battery
The guidelines listed below help you get the most out of your battery’s
performance.
•
Use only Samsung-approved batteries and adaptors. These adaptors are
designed to maximize battery life. Using other batteries or adaptors could
void your warranty and may cause damage.
•
•
In order to avoid damage, charge the battery only in temperatures that
range from 32º F to 113º F (0º C to 45º C).
Don’t use the battery adaptor in direct sunlight or in high humidity areas,
such as the bathroom.
•
•
•
•
Never dispose of the battery by incineration.
Keep the metal contacts on top of the battery clean.
Don’t attempt to disassemble or short-circuit the battery.
The battery may need recharging if it has not been used for a long period
of time.
•
•
It’s best to replace the battery when it no longer provides acceptable
performance. It can be recharged hundreds of times before it needs
replacing.
Don’t store the battery in high temperature areas for long periods of
time. It’s best to follow these storage rules:
Less than one month: 4º F to 140º F (-20º C to 60º C)
More than one month: 4º F to 113º F (-20º C to 45º C)
Disposal of Lithium Ion (Li-Ion)
batteries
For safe disposal options of your Li-Ion batteries, contact your nearest
Samsung Authorized Service Center.
Note: Be sure to dispose of your battery properly. In some areas, the disposal
of batteries in household or business trash may be prohibited.
37
Using the travel adaptor
The travel adaptor allows you to charge your phone’s battery from any 110 volt
AC standard wall outlet. Also, using the travel adaptor allows you to make a
phone call while the battery is charging. The travel adaptor will fully charge an
“empty” standard battery in approximately 4 hours, and an “empty” extended
battery in about 6 hours.
Follow these steps:
1. With the battery in position in the phone, attach the cord from the travel
adaptor by plugging it into the adaptor outlet at the bottom of the phone.
2. Connect the adaptor to a standard 110 volt AC wall outlet. The battery will
begin charging immediately, and the LED (located at the top of your
phone) will light and remain red while the battery icon animates, the
icon will remain animated, even if the phone is turned off during
charging.
3. The LED indicates the status of the battery being charged.
•Red (solid) indicates that the battery is charging.
•Green (solid) indicates that the battery is fully charged.
•Orange (solid) indicates (1) the battery is not seated correctly in
the phone, (2) the adaptor is not plugged in correctly, or (3) the
battery is inoperable. Please check the adaptor and/or battery.
4. Make a phone call at your convenience when the phone is plugged into
the travel adaptor. The adaptor will continue to charge the battery even
when you are making the call!
Note: The battery charges faster when the phone is turned off.
38
Calls
Outgoing
To place a call press
to power on your phone. The phone first shows an
animated sequence and the icons discussed earlier display, this indicates your
phone is on. (No dial tone will be heard). This is called standby mode.
1. Enter the phone number you wish to call (up to 32 digits), by pressing
the numeric keys. The phone numbers display from left to right.
2. Press
to place a call to the entered phone number.
•
A record of the last 10 calls made is stored to the “Outgoing” call log list.
Incoming
Your phone signals an incoming call or message in the following ways:
•
•
•
The backlight illuminates.
The red LED indicator flashes.
The ringer sounds (unless you have set the ringer to vibrate or off.)
Incoming call notification continues until one of the following events occurs:
•
•
•
You answer the call.
The calling party ends the call.
The call is sent to voicemail.
Your phone provides the following voice call notification features.
•
•
•
Eight ring volume settings including vibrate or off.
Five ring types, and fifteen melody tones (see “Ringer type” on page 81).
Name display with Caller ID. (If the caller’s name is programmed into
your Phone Book.)
•
Automatic storage of an incoming call’s information to a call log. (The
last 10 calls you answered are stored in an “Incoming” call log list and
the last 10 calls you missed are stored in a “Missed” call log list).
39
Missed
Your phone keeps a list of calls that you did not answer when the phone was
active and service available. The phone indicates a missed call by displaying a
text notification on the screen. Additionally, if caller information is available, a
Missed call entry is created, and the screen displays the phone number of the
most recent missed call.
Your phone has two convenient options for when you have missed a call:
•
Press
to call the displayed number. (To view a call log of your
missed calls, see “Reviewing outgoing, incoming, or missed calls” on
page 41.)
•
Press
to clear the “Missed Call” message from the display.
Erase log
You can erase any one of the three call directories (Outgoing, Incoming or
Missed), or you can erase all three directories together. To erase all
directories:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for the Calls menu.
for Erase Log. The available options are:
•Outgoing
•Incoming
•Missed
•All
4. Press
up or down. Highlight All.
5. Press
6. Press
to erase all your call directories.
to cancel the action and return to the previous menu.
40
Reviewing outgoing, incoming, or missed calls
When a call log is displayed, press the number associated with the call log to
be connected.
1. In standby mode, press
2. Press
•Press the number associated with the call log to select an option:
to display the main menu.
for Calls.
•Press
•Press
•Press
for Outgoing calls.
for Incoming calls.
for Missed calls.
3. When that call log option displays, press
up or down to locate the
call information you require. If there is a Phone Book match, the name
displays. If there is no Phone Book match, only the phone number will
display.
4. When an individual call log is highlighted:
• Press
• Press
to be connected to that party.
to review all the available call information (name and
phone number [if available] and time/date stamp.)
• Press
for further options (Talk to call the number, Save to
store the number to your Phone Book, or Prepend to prepend
the number).
5. Press
to exit the call log, and return to the previous screen.
Keeping track of call activity
Your phone saves a record of calling activity that permits you to easily return
calls.
Your phone retains these three call directories in memory:
•
•
•
Outgoing: The last 10 calls placed from your phone.
Incoming: The last 10 calls placed to your phone.
Missed: The last 10 calls placed to your phone that you did not answer.
41
Each entry, or call log contains the name and/or (if available), phone number
and a time/date stamp.
In addition to the Incoming, Outgoing, and Missed call directories, your phone
maintains an air time log. For further information see “Air time” on page 43.
Viewing call logs during a conversation
1. Press
2. Press
3. Press
to display the In-Use menu.
for Calls.
to highlight an option. The available options are:
• Outgoing
• Incoming
• Missed
•Erase Logs
•Air Time
4. Press
to open the log of choice, or press
to cancel, and
return to the previous screen.
Call waiting
Your phone beeps when another call is coming in. To answer this call:
1. Press
. When connected, ask them to remain on the line or, request
to call back later.
2. Press
and they will be placed on hold.
You are now connected to your original call. You can press
between calls.
to alternate
Caller I.D.
This feature allows you to see who is calling you by displaying the callers
number when the phone rings. If the callers name and number are stored in
the phone book, the name is also displayed. You can also block your number
from being displayed on another phone by enabling the call block feature.
42
To activate call block:
1. Press
2. Enter the phone number and press
Note: To block your number permanently, contact your service provider.
Three way calling
To place a three way call:
1. Call the first party, and press
. When connected, ask them to remain
on the line, press and they will be placed on hold.
2. Call the second phone number, and press
.
3. When the second party answers, press
connected.
and all parties will be
Note: You may need to contact your service carrier to set up Call waiting,
Caller I.D., and Three way calling.
Air time
Your phone records (or logs), the amount of air time or talk time used for all
calls.
You can view this time from standby mode:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
for Calls.
for Air Time.
to highlight an option. The available options are:
•Last Call
•Total
•LifeTime
•Erase Total
5. Press
to open an option, or press
to cancel, and return to
the previous screen.
43
Last call
Last call allows you to review the amount of time spent on the last call you
made.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
for Calls.
for Air Time.
for Last Call. The amount of time spent on your last call
displays.
5. Press
to return to the previous display screen.
Total
Total air time is the cumulative amount of time the phone has been used since
the total air time was last erased. Air time for all incoming and outgoing calls is
saved here. This feature is not intended for billing purposes.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
for Calls.
for Air Time.
for Total.
The screen displays the total number of calls and the total air time for
calls made and received since you last set the Total air time to zero (by
using the “Erase Total” option.)
5. Press
to return to the previous display screen.
LifeTime
LifeTime air time is the amount of time the phone has been used since it was
first activated. Air time for all incoming and outgoing calls is saved here. This
feature is not intended for billing purposes.
Note: You cannot erase any information created by this option.
44
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
for Calls.
for Air Time.
for LifeTime.
The screen displays the total number of calls made from this phone, and
the total amount of air time used since this phone was set-up. This
information cannot be erased.
5. Press
to return to the previous display screen.
Erase total
If you choose the Erase Total option, the counter for all air times with the
exception of LifeTime, will be set to “zero”. The counter will begin counting the
next time you make or receive a call.
To erase your total air time.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
5. Press
for Calls.
for Air Time.
for Erase Total.
to highlight Yes or No.
6. With Yes highlighted, press
standby mode, or press
to erase the total airtime and return to
to cancel the operation and return to the
previous display screen.
45
Phone Book
Your phone permits you to store up to 500 numbers and names in the Phone
Book. Each entry can have up to 7 associated phone numbers and one e-mail
address. Each entry can contain up to 32 digits including hard pauses, with an
associated name of up to 12 characters. (Name entry is optional) Stored phone
numbers can be placed into one of seven categories - Speed dial, Home, Office,
Mobile, Pager, Fax and No label. You can even specify the memory location of
your choice for each entry. Memory locations can be marked “Secret”
preventing the unauthorized from viewing the telephone number.
One-Touch and Two-Touch Dialing from your Phone Book makes it easy to call
a phone number stored in your Phone Book. See “Shortcuts to memory
dialing” on page 65.
To access your Phone Book
1. Press
2. Press
for the main menu.
for Phone Book.
Use the instructions given in the following subsections to manipulate your
Phone Book.
Add entry
This menu allows you to add a phone number to your Phone Book. As the
exercise progresses you will learn how to add further entries including a
Name, Category, Relation, and Ringtype, together with the ability to generate an
entry location number, and make a number secret.
Here are a list of the Phone Book options:
•
•
•
Number: Telephone number.
Name: Name associated to a telephone number.
Entry: The memory location number which is allocated to the name in
the list of names and numbers that you created.
Secret: This field allows you to designate a number “secret”.
•
46
•
•
•
Category: A “category” label is associated with each phone number. For
example: Speed Dial, Home, Mobile, Office, Pager, Fax, and No
Label.
Relation: A “relationship” label is associated with a group associated
to a number. For example: No Group, Friend, Family, Colleague and
VIP.
Ringtype: This field allows you to set a distinctive ring type for the entry.
With the phone in standby mode:
1. Press
2. Press
3. Press
for the main menu.
for Phone Book.
for Add Entry. The Phone Book display screen prompts
New Entry?.
4. Press
. The prompt changes to Add Entry. Enter the phone
number. (Up to 32 digits can be entered.) For pause options press
. For further details on pause calling, see “Adding pauses” on
page 57.
5. Press
to save the entry. The Phone Book (Information) screen
displays.
Press
6.
to highlight one of the following fields:
•Name
•Entry
•Secret
•Category
•Relation
•Ring Type
47
Adding a name
To add a name to the Phone Book:
1. At the Phone Book (information) screen, press
to highlight
Name.
2. Press
3. Press
, the Enter name screen displays. Enter a name.
to save and display the information in the Name field on
the Phone Book (information) screen.
4. Press
again to save your entry.
Setting secret
This feature allows you to keep certain numbers in your Phone Book
confidential so that others cannot access them.
1. From the Phone Book (information) screen, press
to highlight
Secret.
2. Press
option.
. Press
to highlight the On (secret) or Off (cancel)
3. Press
4. Press
to save.
again to save your entry.
Note: All Phone Book entries can be made secret. If you access the entry later,
you will be prompted to enter your 4-digit user lock code.
Adding a relation label
To add a “relationship” label associated with a group, which is associated with
a number in the Phone Book.
1. From the Phone Book (information) screen, press
to highlight
Relation.
2. Press
display:
, the Relation menu screen displays. The following options
48
•No Group
•Friend
•Family
•Colleague
•VIP
3. Highlight an option and press
to save and display the information
in the Relation field on the Phone Book (information) screen.
4. Press
again to save your entry.
Editing phone book numbers
Once stored in the Phone Book, an entry can be changed quite easily.
To change a Phone Book entry:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
5. Press
6. Press
7. Press
for Phone Book.
for Find Entry. The Phone Book displays.
to highlight the entry requiring editing.
. The existing phone number is highlighted.
and
. The Phone Book (information) screen displays.
Note: If the number is designated as “Secret” you are prompted to enter your
4-digit Lock Code. Once entered, press to locate the Secret option,
and press . Use the navigation key to highlight Off and press
to highlight the Edit option.
.
The Phone Book (information) screen now displays Secret Off.
8. Press
9. Press
to edit the selected field.
to save your changes.
Note: Press
until the existing number is deleted. Enter the new
number. (You can enter up to 32 digits.)
49
Adding and changing a ring type
To set a distinctive ring type to a Phone Book entry:
1. At the Phone Book (information) screen press
to highlight
RingType.
2. Press
highlight an option. The options show: Inactive, 5 monotone ringers, and
15 melodies.
3. Press
, the RingType screen displays. Use the navigation key to
to save and display the information in the RingType field
on the Phone Book (Information) screen.
Overwriting a category
The Category field is automatically filled and designated Speed dial when an
Entry number is generated by the phone. You may wish to change this phone
generated Category label to one of the following: Home, Mobile, Office, Pager,
Fax, or No label, with Speed Dial remaining the default option.
1. At the Phone Book (information) screen,
to highlight Category.
2. Press , the Category screen displays. The options are:
•Speed dial
•Home
•Mobile
•Office
•Pager
•Fax
•No label
3. Press
to save and display the new Category label on the Phone
Book (information) screen.
4. Press
again to save your entry.
50
Overwriting existing name and number
information
You can overwrite existing information using separate actions in both the name
and number fields. Follow these instructions:
1. At the Phone Book (information) screen, press the
arrow
repeatedly to locate and highlight an existing name or number field that
needs the information changed. When highlighted, press
.
2. The name or number will be displayed. To overwrite, hold down
,
until you clear the existing name or number. Enter new information.
3. Press
4. Press
to save. The new information will be displayed.
again to save your entry.
Find name
This option allows you to find a stored name (alphabetically) in the Phone
Book and place a call to that name.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Phone Book.
for Find Name. (For quicker access to the entry can also
press the key associated with the first character of the name you wish to
find.)
4. Press
5. Press
to highlight the name.
to select the name. The display screen shows the phone
number and E-mail address (if available) associated with the name.
6. Press to place the call.
With an entry selected, press
to access any of the following options:
calls the number.
•
•
Talk: Pressing
or
Add #: Permits the adding of a phone number.
51
•
•
Edit: Permits editing of the phone number, name, entry number,
category, secret number, relation and ring type.
Prepend: Allows you to prepend a number to either a feature code or
area code before calling.
•
•
Erase: Erases the number.
Name Ring: Permits you to select a unique tone to identify an incoming
caller.
•
E-mail addr: Permits you to add an E-mail address.
7. Pressing
returns you to the previous screen.
Find entry
This option allows you to find a stored entry by location number.
1. In standby mode, press to display the main menu.
2. Press
3. Press
4. Press
5. Press
6. Press
7. Press
for the Phone Book.
for Find Entry.
to highlight a specific entry.
to select the entry. The entry information is displayed.
to highlight the phone number.
to call the number.
Note: If no name is associated with the number, the Name Label shows No
Name
52
Relation search
This option allows you to find a stored entry in a related group.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
for the Phone Book.
for Relation.
left or right to review the Relation groups displayed at the
bottom of the screen and see associated names mid screen.
5. Press
6. Press
down to highlight a specific entry.
to select the entry from the group. The entry information is
displayed with the phone number highlighted.
Note: If the phone number is designated “secret” the number will not be
displayed on the standby screen when called.
7. Press
to call the number, or press
to return to the
previous display screen
Setting auto answer
With this option activated, your phone will automatically answer calls after the
specified number of seconds. This options is useful when driving.
If Auto Answer is set to ‘Off’ the phone will not answer an incoming call. If you
do not answer the call it is automatically stored in the Missed Call log.
To enable Auto Answer.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
for Setup.
for Auto Answer. The Auto Answer screen displays.
to highlight an option. The available options are:
•off
•after 1 sec
•after 3 sec
53
•after 5 sec
5. Press
to save.
6. Pressing
returns you to the previous screen.
Adding an e-mail address
Use this method to add a new e-mail address to an entry in the Phone Book.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Phone Book.
for Add E-mail. The Phone Book screen displays the
highlighted words New Entry?
4. Press
.
5. The E-mail Addr blank screen displays together with MENU:Options.
Note: Choosing MENU:Options allows you to select from entry modes: T9
Word, ABC, Symbol and 123. For further information on these entry
modes see “Entering text, numbers, and/or symbols” on page 103.
6. Begin entering the e-mail address using the keypad. You can enter up to
48 characters.
7. Press
to save. The Phone Book (information) screen displays the
newly entered e-mail address.
Note: To continue to complete the Name, Entry, Secret, Category, Relation,
and Ring Type fields, information is available on adding a name see “Adding
a name” on page 48, adding an entry see “Add entry” on page 46, Secret
numbers see “Editing phone book numbers” on page 49, for Relation see
“Adding a relation label” on page 48, “Editing phone book numbers” on
page 49, or “Storing emergency numbers” on page 120. Categories may be
selected using the MENU:Options prompt.
54
Editing an existing e-mail address
Use this method to edit an existing e-mail address.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
5. Press
for Phone Book.
for Find Entry. The Phone Book displays.
to highlight the entry and press
.
, and select the Edit option. The Phone Book (information)
screen displays. Edit the existing E-mail address using the methods
described under “Adding an e-mail address” on page 54
6. Press
to save.
55
Adding an e-mail address to an existing
phone book entry
You can add an E-mail address to an existing entry in the Phone Book, your
phone can then send a message via the network service provider to the e-mail
address.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for the Phone Book.
for Add E-mail. The Phone Book (information) screen
displays with the entries found under Find Entry.
4. Press
5. Press
6. Press
to highlight the name requiring the E-mail address.
to open. The E-mail addr entry screen displays.
for the options menu and select from entry modes For
further information see “Adding an e-mail address” on page 54.
7. Enter the E-mail address. You can enter up to 48 characters.
8. Press
to save. The Phone Book (information) screen displays
showing the newly added E-mail address.
9. Press
again to save your entry.
56
Adding pauses
When you call automated systems (like banking services), you are often
required to enter a password or account number. Instead of manually entering
the numbers each time, you can store the numbers in your Phone Book
separated by special characters called pauses.
•
•
P pause: A hard pause stops the calling sequence.
T pause: A 2 second pause stops the calling sequence for 2 seconds and
then automatically sends the remaining digits.
•
Hyphen: Places a hyphen between characters.
Your phone has 2 pause calling methods: pause calling from the Phone Book
(see “Manual pause calling” on page 59), and manual pause calling (see
“Manual pause calling” on page 59).
Note: Multiple 2 second pauses can be entered to extend the length of a
pause. For example, 2 consecutive 2 second pauses cause a total pause time
of 4 seconds. However, keep in mind that pauses count as digits towards the
32 digit calling maximum.
57
Storing pauses in a phone book entry
To store a number in your Phone Book that contains pauses.
1. Enter the phone number you want to store (such as the bank’s teleservice
phone number).
2. Press
3. Press
4. Press
. The pause menu options display.
to highlight one of the three pause menu options offered.
to select an option.
•“P” Pause: The letter “P” displays within the number, meaning that
a hard pause will occur at that point in the calling sequence. Enter
the digits that need to follow the pause (such as your account
number).
•“T” pause: The letter “T” displays in the number, meaning that a
“Timed” (2 second) pause will occur at that point in the calling
sequence. Enter the digits that need to follow the pause (such as
your account number).
•Hyphen: Places a hyphen between characters.
5. When the number and pauses are complete, press
to store the
number in your Phone Book.
58
Pause dialing from a stored entry
To pause dial from the Phone Book:
1. If you stored the number using (2 second) “T” pause(s) , simply call the
number from the Phone Book.
2. If you stored the number using (hard) “P” pause(s), call the number
from the Phone Book and wait for the appropriate prompt from the
number you are calling (credit card number, bank account number,
etc.).
Manual pause calling
To manually call a number with pause(s) without storing to the Phone Book.
For pause information see “Storing pauses in a phone book entry” on page 58.
1. Enter the phone number of the service you want to call (such as a bank’s
teleservice phone number). For example, your bank’s teleservice phone
number might be an 800 number. Begin by entering the number 1.
2. Press
the pause option of choice and press
manner until you enter the complete number with pause(s).
to display the pause Menu options. Press
to locate
to activate. Continue in this
3. Press
to call the number.
Note: Storing pauses is convenient if you plan to call the number frequently.
Accessing your phone book during a
conversation
To access your phone book during a conversation:
1. Press
2. Press
to display the In-Use menu.
for Phone Book.
3. Use your keypad to enter the number associated with the Phone Book
menu option to locate the information required.
59
Prepending a phone number
The Prepend option permits you to add prefix numbers such as area codes and
network feature activation codes to phone numbers that are already stored in
your Phone Book or call log.
To Prepend a stored phone number:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Phone Book.
for Find Name, or
for Find Entry.
Note: Find Name searches the Phone Book entries alphabetically, and
Find Entry searches the Phone Book entries numerically.
4. Press
.
5. Press
6. Use the
7. Press
to display Menu options.
arrows to locate the Prepend option.
.
8. Use the keypad to prepend the number (which cannot be longer than 10
digits.)
9. Press
to place the call.
Erasing individual phone book entries
To erase an existing entry from either the Find Name or Find Entry option.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
5. Press
for Phone Book.
for Find Name or
for Find Entry.
to highlight the information and press
to display the following menu options:
.
•Talk
•Add #
60
•Edit
•Prepend
•Erase
•Name Ring
•E-mail addr.
6. Press
to highlight the Erase option. Press
. The phone
prompts Yes or No. Press
to your option of choice.
7. Press
to confirm (Yes) and erase the Phone Book entry, or press
to cancel (No) the Erase command and return to the Phone
Book.
Erasing your phone book
You can erase all the numbers stored in your Phone Book. This is useful if you
want to give your phone to a friend or family member, or if you need to erase
all of your phone numbers.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Security. Enter your current 4-digit lock code.
for Clear MEM. A confirmation message displays asking if
you still want to “Proceed”.
4. Press
to continue and erase the Phone Book entirely, or press
to cancel the operation. The message “Erasing Phone Book
and Voice Dial” displays while the operation is under way. The phone
then returns to standby mode.
Adding a name ringer to your phone
book entry
You can associate one of 20 different ringers (fifteen melodies and five
monotones) to numbers stored in your Phone Book. When you receive an
incoming call from a number matching an entry in your Phone Book your
phone will play the associated ringer to announce the call.
61
Note: If the Caller ID information is unavailable for an incoming call then the
Name Ringer option will also be unavailable.
1. In standby mode, press
to display the main menu.
2. Press
for Phone Book. (Find the entry to which you wish to add
a Name Ringer, using one of the search methods described under “Find
name” on page 51, or “Find entry” on page 52.)
3. Press
to highlight the entry to which you wish to add a Name
Ringer.
4. Press
.
5. Press
6. Press
7. Press
8. Press
9. Press
.
to highlight Name Ring.
. Your phone displays the current Name Ringer setting.
to listen to other available ringers and melodies.
to save your selection.
Setting speed dial
For each name entered in the Phone Book, the option of designating a Speed
Dial number is available.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
5. Press
6. Press
7. Press
8. Press
9. Press
62
for Phone Book.
for the Find Name, or
for Find Entry .
to highlight the entry you wish to designate.
to display that entry’s phone number.
for options.
to highlight the Edit option.
. The Phone Book (information) screen displays.
to highlight Category.
10. Press
11. Press
for options.
to highlight Speed dial, and press
. The Phone
Book screen displays with the wording Entry: 000 highlighted.
12. Use the keypad to enter the associated Speed dial number.
13. Press
name or entry an “Overwrite?” prompt will be displayed. Use the
arrows to choose “Yes” or “No”, press to continue,
to cancel and return to the
. If you have previously set a speed dial number for this
following the prompts, or press
previous screen.
Storing incoming phone numbers at the
end of a call
To store a phone number after ending a call:
Note: If the call was incoming, and Caller ID information was unavailable,
then the store option will also be unavailable.
1. Once you have pressed
to end your call, the screen displays the
call time (length of call), phone number and name of the party (if
available).
2. Press
for main menu.
for Calls.
3. Press
4. Press
5. Press
6. Press
7. Press
for Incoming.
.
for menu options, navigate to highlight Save.
to store the phone number to the Phone Book.
63
Storing phone numbers from call logs
Use this method to store a phone number from the call logs.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Calls.
for Outgoing, or
for Incoming call activity.
4. Highlight the number that you wish to store to the Phone Book and
press
5. Press
6. Press
.
for menu options, navigate to highlight Save.
to store the phone number to the Phone Book.
Note: The number can be stored to the Phone Book as a new entry, or for
further details regarding updating an existing entry see “Editing phone
book numbers” on page 49.
Shortcuts to storing phone numbers
You can store a phone number by entering the number, and pressing
.
Follow the screen prompts to designate other information. You can also save a
number after an incoming or outgoing call. For further information see
“Storing phone numbers from call logs” on page 64
Calling numbers from the phone book
Calling numbers from your Phone Book is simple. Different methods are
explained below:
One-touch dialing
Memory locations 001 through 009 are special One-Touch locations. You can
call the phone numbers stored in the Phone Book memory from 001 through
009 by pressing one key. For example, for location number 001. Press and
hold
until the name and number are displayed and called.
64
Two-touch dialing
Memory locations 010 through 099 are special Two-Touch locations. For
example, for location number 013, press
and hold down
until
the name and number are displayed and called. To dial the number 100, Three
Touch dialing is required.
Three-touch dialing
Memory locations 100 through 500 are three-Touch locations. For example,
for location number 113, press
until the name and
number are displayed and called. To dial the number 100, Three Touch dialing
is required.
Shortcuts to memory dialing
Speed Dialing:
From standby mode, enter the entry’s Speed Dial
number, and press
to call .
Navigating to the #:
From standby mode, press
for main
menu, press
for Find Entry. Use the navigation key to
highlight the entry, press to call that
entry’s Speed Dial number.
for Phone Book, press
65
Web/Minibrowser
Your phone comes equipped with Wireless Web Internet access through a
MiniBrowser. The MiniBrowser displays immediate information through your
phone. You can view specially designed versions of popular sites which include
sports, weather, news, stock quotes, etc. Browsing the Web through your
phone is not the same as using your PC since site providers have only selected
certain aspects of the available sites to present to the wireless phone users and
have removed most graphics.
Each time you launch the MiniBrowser, the phone will connect to the Internet
and the service indicator icon will display. Any time the service indicator icon is
visible on the display, you are connected to the Internet and will be invoiced
accordingly. Rates and pricing vary according to your service option. For
further information contact your service provider.
The MiniBrowser will end an Internet connection after a certain period of
inactivity, however some information from your session remains stored in the
phone, and (if you leave your phone turned on) you can access this
information without reconnecting to the Internet. If you are viewing this stored
information, and you select a link to a site that was not accessed in your last
session, then you will automatically be re-connected to the Internet.
Note: The phone must be in a digital network to use the MiniBrowser. When
you are in a digital network, the
icon is displayed.
A shortcut to launching the Web
You can quickly use this shortcut to access the Minibrowser.
•
In standby mode, press the right
press
arrow, then
.
66
Launching the minibrowser
Note: The first time you use the MiniBrowser, you will be prompted to go
through a security setup process that takes approximately three to five
minutes.
Note: When the security key is initially sent to the carrier, a unique value is
created. If the phone is reset for any reason, you must contact the carrier to
reset the security key. The original key is no longer valid and will not allow
the MiniBrowser to operate.
To launch the MiniBrowser.
1. In standby mode,
2. Press
right, or press
.
for Start Browser.
3. Press the left navigation key arrow. Your phone will begin its search to
launch the MiniBrowser.
4. Once connected, the Home Page (or the last page visited), will be
displayed. To access the Home Page from any other menu in the
MiniBrowser, press and hold
.
An example of a Home Page is shown below:
WEB HOME PAGE
1. Financial
2. Traffic
3. Travel
4. Weather
5. Sports
6. Entertainment
7. Games
8. Shopping
9. Portals
Note: What appears in the display window is dependent upon the service
provider content. To view additional text, use the
.
67
Exiting the web/minibrowser
Press
to exit the Web.
If the “Prompt to end” or “Prompt both” option is selected in the
MiniBrowser setup (
), a prompt asking if you want to
end the MiniBrowser call is displayed.
The minibrowser start and end prompts
Your phone can be set to view a prompt each time you start or end a
MiniBrowser session. You have the option to change this default prompt
setting. The default setting may differ as it is based upon the carrier’s
requirement. To change the settings:
1. In standby mode, use your thumb on the navigation key’s right arrow, or
press
2. Press
3. Press
to display the main menu, and press
for Web.
for Prompt.
to highlight one of the four options:
•None: This prompt is never displayed.
•To Start: You will see this prompt when you enter the browser, but
not when you exit it.
•To End: You will see this prompt only when you exit the browser.
•Both: You will be prompted when you enter or exit the browser.
4. Press
to save your setting or press
to cancel.
The minibrowser soft keys
At the bottom of the MiniBrowser display is a solid bar which contains the
browser commands. The “soft” keys (
) appear below
the solid bar and are used to execute the commands. These two keys are called
“soft” keys because their function changes depending on where you are in the
MiniBrowser software.
68
Navigating the web
When you use the MiniBrowser, some of the keys on your keypad will operate
differently than during a normal phone call. These keys are explained in “How
the minibrowser works” on page 69.
The MiniBrowser presents on-screen items in any of the following ways:
•
•
•
•
Text or numeric input.
Links (embedded in content).
Numbered options (some options may not be numbered)
Simple text
You can act on the options or links by using the soft keys.
How the minibrowser works
Navigation key: Use the up/down navigation
key arrows to find and select from all
MiniBrowser options. The selected option is
indicated by an arrow. Also use the navigation key
to move the cursor when editing text.
The right/left navigation key arrows are soft
keys. The left soft key is used as “OK” or “Retry”.
The right soft key is used to access secondary
options, or a menu of secondary options such as
“Cancel” or “Done”.
OK / message: This key is used primarily for
selecting the highlighted item.
69
CLR: This key performs two
functions:
•
It is used as a browser back-up key.
Pressing it once backs you up one page.
Pressing and holding it down backs you up
to the carrier’s Home Page.
•
It also clears entered text or numbers.
When entering numbers or text, press it to
clear the last number, letter, or symbol.
Press and hold it down to completely clear
the input field.
Asterisk / Shift: Press this key before entering
text to create upper case characters. You can also
use this key to move back one space on the
display screen.
0 / Next: Press this key to enter a 0, or to move
to the next word when in T9 predictive word entry
mode.
Pound / Space: Press this key to insert a space
when entering text.
Numbers 1 - 9: If items on a menu are
numbered, these keys can be used to select them.
END: Press this key to exit the MiniBrowser and
return the phone to standby mode.
MENU: This key can be used to enter the
MiniBrowser menu at any time.
SEND: This key can be used to send a call.
70
Using links
Links have several purposes, including jumping to a different page, jumping to
a different site or even initiating a phone call from some sites. Links are shown
inside of brackets ( [ ] ), and you can normally use the left soft key to select a
link when it is highlighted.
Making a phone call while using the
minibrowser
You may initiate a phone call from the MiniBrowser if the site you are using
supports this feature (the phone number may be highlighted and the left soft
key will appear as “Call”). Pressing the “Call” soft key will call the number. In
most cases you can also use
to call the number. The Internet
connection will be terminated when you initiate the call. After you end the call,
your phone will return to standby mode.
71
Scheduler
Information features
Information features allow you to add events in a calendar format that can be
viewed, and if so required alert you to these same events.
How to access information features
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Scheduler.
to highlight an option. The available options are:
•Today
•View Month
•Jump To Date
•To Do List
•Count Down
•World Time
•Calculator
•Alarm
4. Press
to open that option.
Scheduler
Scheduler functions allow you to schedule personal events and view them in an
easily read format.
Today
You can schedule up to 9 events for the current day by indicating each event’s
start and end time. You can be alerted by an alarm before an event is to
commence. Events that are scheduled for future dates automatically appear on
your Today events schedule on that particular day.
72
How to schedule an event
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
for Scheduler.
for Today, the New Event screen displays.
to view the following options.
•T9 Word
•ABC
•Symbol
•123
5. Press
6. Press
to highlight an option.
to select that option.
Note: Press and hold
to navigate between text entry modes and
numeric icons, making it easier to enter information in the correct format.
7. Enter the event. (Up to 32 characters can be entered.)
8. Press to continue. The Time/Date screen displays.
9. Add the start time and date using the keypad.
10. Press to display the next screen. Add the end time and date. After
the correct information is entered
11. Press , an alarm screen is displayed. Use the navigation key to
highlight an alarm to notify you of your event. The options are: No
alarm, On time, 10Min before, 30Min before, 1Hour before.
12. Use the navigation key to locate the option and press
to save. The
phone prompts that the information is “Stored”.
How to add, edit, or erase an event
1. In standby mode, press
for the menu and Scheduler.
Press
for Today.
2. Press
for the following options:
73
•Add New: Allows you to add an event.
•Edit: Allows you to edit an event.
•Erase: Allows you to erase an event.
•Erase all: Allows you to erase all scheduled events.
3. Press
to select the option of choice, and complete the exercise by
following the prompts.
View month
View Month allows you to view in calendar format the current month, a past
month or a future month. In View Month, the current date is highlighted on the
calendar. Days with scheduled events are underlined.
How to view an event
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Scheduler.
for View Month, a current calendar screen displays. (The
current date is highlighted, but you can use the navigation key to select a
new date and month. (If more than one event is scheduled, use the
navigation key to display them.)
4. Pressing
at a selected date, offers the following options:
•View: Permits you to view the previous entries for that date.
•Add New: Permits you to add a new entry for that date.
5. Use the navigation key to highlight Add New. Select
option. The New Event screen displays. Complete the exercise by
following steps 4 through 9 as indicated in “How to schedule an event”
on page 73.
to enter the
Jump to date
Jump To Date allows you to specify the calendar date you want to view. Arriving
at the desired date, you can enter, edit, and/or erase events in your calendar.
74
Using jump to date
1. In standby mode, press
for the menu and Scheduler.
Press
for Jump To Date. Complete the exercise by using steps 4
through 9 as indicated in “How to schedule an event” on page 73.
To do list
The To Do List allows you to compile a list of items to be completed. Your
phone can store, prioritize and manage twenty To Do List items.
Creating a to do list item
1. In standby mode, press
for the menu and Scheduler.
Press for To Do List. An Add To Do screen displays. Complete
the exercise by using steps 4 through 9 as indicated in “How to schedule
an event” on page 73. You can choose the navigation key to set the
priority for a To Do List item. Your choices are High and Low.
How to view, edit, add or erase a
to do list item
1. In standby mode, press
for the menu and Scheduler.
Press
for To Do List. Press
to locate the event you wish to
change.
2. Press
. Your options are: Add new, Edit, Erase, and Erase all.
Complete the exercise by following the prompts.
Count down
Count Down allows you to find out how much time will elapse between the time
entered and a scheduled event. You can create up to twenty Countdown timers.
•
•
The keys
Countdowns can be entered for dates between the years 1980 and 2099.
for the menu and Scheduler.
for Count Down. The screen prompts for a new Count
and
are equal to A.M. and P.M.
1. In standby mode, press
Press
75
Down. Enter a name for your new Count Down timer. Press
to
complete.
2. Enter the date and time you want to “Count Down” to. For example: if
today’s date is April 1, 2001 and you wish to know how many months,
days, and hours remain before 7:00 P.M. February 14th 2002, enter the
time 07:00 P.M. and the date 02/14/2002.
3. Press
to store the Count Down timer.
How to view, edit, add or erase a
count down timer
1. In standby mode, press
for the menu and Scheduler.
Press
for Count Down. Countdown timers display in order of the
least amount of time passed since the countdown commenced, and least
amount of time remaining until the specified date.
2. Press
to open the options. Your choices are:
•Add New
•Edit
•Erase
•Erase all
3. Press
to select the option. Use the navigation key to find the item
you wish to change and follow the prompts. You can press
time to exit the exercise.
at any
World time
Informs you of the time of day, or night in another part of the world. World
Time displays the time in 24 different time zones around the world, in one or
more major cities, states, regions or countries. It should be noted that World
Time does not support Daylight Savings Time for countries other than the USA.
76
Checking current time world wide
1. In standby mode, press
for the menu and Scheduler.
Press
for World Time. The screen displays a world map. The
city, country, time and date are indicated by a longitude indicator. You
can navigate up/down, left/right to reach the city and time you need.
• Alaska
• Vancouver
• Calgary, Denver
• Caracas
• Cape Verde
• Athens, Helsinki
• Tashkent
• Winnipeg
• Buenos Aires
• London
• Ottawa, New York
• Mid Atlantic
• Paris, Berlin
• Moscow
• Abu Dhabi
• Alma-ata
• Seoul, Tokyo
• Wellington
• Bangkok, Jakarta
• Guam, Sydney
• Samoa, Midway
• Hongkong, Beijing
• Okhotsk
• Honolulu, Hawaii
Calculator
You can perform calculations, including addition, subtraction, multiplication
and division using your phone.
To perform a calculation
Use
to enter a decimal point, and
to change the sign for a
number to a negative.
1. In standby mode, press
for the menu and Scheduler.
Press
for Calculator. The Calculator screen displays.
2. Use the keypad to enter the first number in your calculator. (Numbers
can be up to 9 digits long.)
3. Use the navigation key arrows to set the operator for your calculation.
Your choices are:
•[+] Addition
•[-] Subtraction
•[x] Multiplication
•[/] Division.
77
4. Use the keypad to enter the second number into your calculator.
5. Press to perform the calculation and view the result, or continue
to calculate with the same operator, or change the operator and
continue. Every time you change the operator, the previous calculation is
performed and the result is displayed as the bottom number on the
display screen.
6. Press
to perform the calculation and view the result.
Alarm
Your phone has an alarm clock that can be set to go off once, or daily at a
specified time.
Once set, the alarm is easy to change or turn off completely.
To set the alarm:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
for Scheduler.
for Alarm. Your options are Set and Release.
for Set.
5. Press
to the option you want to use. Your choices are Once, or
Daily.
6. Press
. The Alarm menu opens.
7. Using the keypad, enter the time for the alarm to activate. Select
to store the setting, or press
options menu.
to return to the previous alarm
•As your phone only supports a 12 hour time display, it is necessary
to press either
, or
. These keys represent A.M. and
P.M. respectively.
78
8. Should you wish to terminate the alarm follow steps 1 through 3 and
press
for Release. Press
to save, or press
to
return to the previous alarm options menu.
Note: Once an alarm is set, an alarm clock icon
displays on the screen in
standby mode. When the alarm is turned off the alarm clock icon
removed.
is
Note: To change the alarm time, or turn the alarm off, repeat steps 1 through
3 above, and follow the prompts.
79
Sounds
Ringer options
Your phone provides a variety of ringer options through the Sounds menu.
These options allow you to customize your ringer type and ringer volume
settings in order to easily recognize a certain type of incoming call, message or
scheduled event.
Note: To adjust your ringer volume (for example, to quickly turn it off or to
the vibrate mode before you enter a meeting, concert, etc.) see
“Ringer volume” on page 80.
Adjusting ringer volume (rapidly)
From the standby mode, you can adjust the ringer (8 levels), set it to vibrate,
set it to 1-beep, or set it to mute using the
“Up/Down” arrows.
Adjusting voice volume during a call
You can adjust the handset as well as the (optional) headset volume during a
call by using the
up/down arrows.
Ringer volume
To activate the two options under the ringer volume option for Sounds.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Sounds.
for Ringer Vol. Two options display: Calls, and Alarm.
4. Press the numeric key, or highlight the option and select it using
5. The screen immediately displays the volume icon
the bars of
which will change according to the setting chosen, you can also press the
down arrow to change the setting. When the desired setting is
reached, press
to save.
6. Press
to return to the previous menu at any time.
80
Note: When the lowest volume setting is reached, the phone automatically
goes into vibrate mode, physically alerting you to this option.
Ringer volume — Calls
Refer to “Ringer volume” on page 80 for instructions on operating this option.
Ringer volume — Alarm
Refer to “Ringer volume” on page 80 for instructions on operating this option.
Ringer type
Five monotone ringer types and fifteen melody tones can be found under the
ringer type option in the Sounds menu.
Ringer type — Voice Calls
To activate, view or change the ringer type for voice calls:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
5. Use the
for Sounds.
for Ringer Type.
for Voice Calls.
to navigate through the 8 monotone ringer types and 15
melody tones. Each tone plays as you navigate through the options.
6. When the desired ringer type plays, press to save the setting.
Note: You can press
to return to the previous menu at any time.
Ringer type — Alarm
To activate, view or change the ringer type for the alarm:
1. In standby mode, press to display the main menu.
2. Press
3. Press
4. Press
for Sounds.
for Ringer Type.
for Alarm.
81
5. Use the
tones. Each tone plays as you navigate through the options.
6. When the desired ringer type plays, press to save the setting.
to locate the 5 monotone ringer types and 15 melody
Note: You can press
to return to the previous menu at any time.
Ringer type — Data/Fax incoming
To activate, view or change the ringer type for incoming data/fax calls:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
5. Use the
for Sounds.
for Ringer Type.
for Data/Fax In.
to locate the 8 monotone ringer types and 15 melody
tones. Each tone plays as you navigate through the options.
6. When the desired ringer type plays, press to save the setting.
Note: You can press
to return to the previous menu at any time.
Ringer type — Schedule alerts
To activate, view or change the ringer type for schedule alerts:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
5. Use the
for Sounds.
for Ringer Type.
for Schedule.
to locate the 5 monotone ringer types and 15 melody
tones. Each tone plays as you navigate through the options.
6. When the desired ringer type plays, press to save the setting.
Note: You can press
to return to the previous menu at any time.
82
Key beep
Key Beep allows you to adjust the tone volume that the keypad generates each
time you press a key. The display icon shows up to 8 levels (the loudest
setting). No bars indicate that the key beep function is silenced.
1. In standby mode, press
to display the main menu.
2. Press
for Sounds, then press
for Key Beep.
3. Press the
to locate the 5 volume levels
.
4. When the desired volume is reached, press
to save the setting.
Note: You can press
to return to the previous menu at any time.
Alerts
Your phone will beep from time to time, this beep is called an alert beep. Alert
beeps can easily be turned on or off. This feature offers 6 different options:
Minute beep, Service, Connect, Disconnect, Fade, and Roam.
Alerts — Minute beep
You can set the minute beep option to sound an alert 10 seconds before each
elapsed minute to remind you of the length of the current call.
To turn minute beep on or off:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Sounds.
for Alerts. The following options display:
•Minute beep
•Service
•Connect
•Disconnect
•Fade
•Roam
4. In this exercise select the Minute beep option. (For other “Alerts”
exercises to work correctly, select the appropriate option.)
83
5. Press the
to choose between On or Off.
6. When the desired setting is reached, press
to save the setting.
Note: You can press
to return to the previous menu at any time.
Alerts — Service
You can set the service alert option to sound an alert when the phone goes in
and out of service coverage areas.
Refer to “Alerts — Minute beep” on page 83 for instructions on how to
operate this option.
Alerts — Connect
With this option set to “On”, the phone sounds an alert when your call is
connected.
Refer to “Alerts — Minute beep” on page 83 for instructions on how to
operate this option.
Alerts — Disconnect
When this option is set to to “On”, the phone sounds an alert when the phone
experiences a dropped or a failed call.
Note: You can press
When a call experiences a failed or dropped call, a text message will
display. Press to clear the prompt and return to standby mode. If
the dropped call was an outgoing call from your phone, you can redial the
number automatically by pressing twice.
to return to the previous menu at any time.
Refer to “Alerts — Minute beep” on page 83 for instructions on how to
operate this option.
Alerts — Fade
With this option is set to to “On”, the phone sounds an alert when a dropped
call occurs during conversation in response to a signal fade.
84
Refer to “Alerts — Minute beep” on page 83 for instructions on how to
operate this option.
Alerts — Roam
When this option is set to to “On”, the phone sounds a unique tone when you
leave your “home” service area when on a call.
Refer to “Alerts — Minute beep” on page 83 for instructions on how to
operate this option.
Voice volume
This option enables you to adjust the voice volume of the earpiece while on a
call. The display icon shows up to 5 levels (the loudest setting).
To adjust the voice volume level:
1. In standby mode, press
to display the main menu.
2. Press
for Sounds.
3. Press
for Voice Volume.
4. Press the
to adjust the volume setting.
5. When the desired volume level is reached, press
setting.
to save the
Note: You can press
to return to the previous menu at any time.
Roam Ringer
When this option is set to “On”, your phone sounds a unique tone when a call
is received in a “network” service area.
(This feature is to “On” by default).
To set the Roam Ringer alert on or off:
1. In standby mode, press
2. Press
to display the main menu.
for Sounds.
85
3. Press
for Roam Ringer.
4. Press the
to choose between On or Off.
5. When the desired setting is reached, press
to save the setting.
Note: You can press
to return to the previous menu at any time.
Power on/off
When this option is set to on, the phone sounds an alert when the phone is
either powered on, or powered off.
To set the Power On/Off alert:
1. In standby mode, press
to display the main menu.
2. Press
for Sounds.
3. Press
for Power On/Off.
4. Press the
to choose between On or Off.
5. When the desired setting is reached, press
to save the setting.
Note: You can press
to return to the previous menu at any time.
86
Display
The following features offered under the Display menu allow you to customize
your phone.
•
•
•
•
•
•
•
•
Control when, and for how long, your backlight is active.
Define a personal greeting of up to 12 characters.
Display your own phone number.
Set the language.
Set time and date manually.
Automatically hyphenate phone numbers.
View the hardware and software versions of your phone.
Display an animated image.
Backlight
There are several options for setting the backlight features.
Press any key and the backlight comes on. The length of time that the backlight
remains active can be set to Always Off, 7, 15, or 30 seconds.
Note: Backlight usage drains your battery faster.
To set the Backlight:
1. In standby mode, press
to display the main menu.
2. Press
for Display.
3. Press
for Backlight.
4. Press the
to go through the menu options:
•Always Off
•7 seconds
•15 seconds
•30 seconds.
5. When the desired setting is reached, press
to save.
87
Banner
This option allows you to edit and personalize the banner displayed on the
standby display screen.
Note: Enter the personal greeting using the keypad, Press
for T9
Word, ABC, symbols and 123 options respectively
Note: The
key will also navigate through the same options in identical
order, and can be pressed for upper case characters.
To change the banner:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Display.
for Banner. Clear the existing banner by pressing
.
4. Enter your new banner (Up to 12 characters).
5. Press to save.
Animation
The animation option allows you to choose from several options already
available on your phone:
To display an animated image:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
for Display.
for Animation.
to change one or all of the following options:
•Power On
•Power Off
•Idle Mode
Note: You can choose to have a different animation for each option.
5. Press
88
to save.
My phone #
To display your phone’s number:
1. In standby mode, press
to display the main menu.
2. Press
for the Display.
3. Press
for My Phone #. The phone’s number displays.
4. You can press
to return to the previous menu at any time.
Language
The language option on your phone can change the language of voice prompts,
menus, and key-input.
To change the language:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
5. Press
for Display.
for Language.
to highlight the language required.
to save.
Note: You can press
to return to the previous menu at any time.
Set time
Your phone is equipped with a standard clock. Your phone automatically
displays the time and date when in digital mode. This same information is
unavailable on the screen when your phone is out of service or in analog mode
when powered up.
To manually set the time and date:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for the Display.
for Set Time. The Time Set menu displays.
89
4. Enter the time (using the 12 hour format) and date. Use
and for P.M..
5. When the desired setting displays, press
for A.M.
to save.
Note: You can press
to return to the previous menu at any time.
Auto hyphen
With the option set to “Yes”, your phone automatically hyphenates numbers.
For example: 972-761-0000.
To set the Auto Hyphen option:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
5. Press
for Display.
for Auto Hyphen. The “On” and “Off” options display.
to highlight an option.
to save.
Note: You can press
to return to the previous menu at any time.
Version
You can view both the software version and hardware version running on your
phone. This feature is helpful if you need to call your carrier.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Display.
for Version. The hardware and software information
displays.
4. Press
to return to standby mode.
90
Voice dial
Your phone features Voice Dial(ing). You can call up to 20 stored names
simply by speaking one of the names into the microphone. Using the Voice
Dialing feature requires that you first program the phone to recognize the
name of the person you are calling.
Note: Voice dialing entries cannot be connected to your phone book. If you
wish to set voice dialing for frequently used numbers in your phone book,
you must separately record the names and re-enter the same phone
numbers into the Voice Dial memory locations.
Tips on recording names
•
Avoid recording similar names phonetically. If you record a name similar
to one already stored in voice memory, the phone requests another
name.
•
•
•
Avoid recording in a noisy place.
Speak clearly and naturally.
Avoid very long or very short names. Names with two to five syllables are
recommended.
•
If a voice entry does not properly connect, you may need to record the
name and number again.
Record
The phone provides voice prompts and screen displays to guide you through
the recording process.
To program the phone for voice calling:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Voice Dial.
for Record. The phone will prompt you to say the name
you want to record.
91
4. Wait for the beep and then say the name. For best results, use names with
at least two syllables, or use both a first and last name. The phone stores
the name as a “first” sample, and then prompts you to say the name
again.
5. Respond to the prompt by repeating the name exactly as you did the first
time. The phone stores the name as a “second” sample and then requests
the phone number.
6. Enter the phone number using the keypad.
7. Press
to save the number. The entered number displays, the
phone prompts “Recorded”. If the entered number matches a number
already stored in your Phone Book, the name also displays.
8. The screen then returns to the Voice Dial menu.
Review
To review voice calling entries:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Voice Dial.
for Review. A list of stored numbers display. (The names
also display if stored in the Phone Book.)
4. Press to highlight the desired entry and press
recorded name is vocalized. Press while reviewing an entry to
. The
erase that same entry. When finished, the phone returns to standby mode.
Note: You can locate the entries without having to listen to each one by using
the
, or press
to listen to them all as they play in order.
92
Erase all
To erase all voice calling entries
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Voice Dial.
for Erase All.
4. At the voice prompt and screen prompt, press
to confirm that you
wish to Erase All of the entries. A screen prompt will display when the
entries have been erased.
5. Press
at any time to exit without removing any voice entries.
Set active
Voice dialing is always active once you have programmed the phone to accept
voice entries and associated the phone numbers. To place voice activated calls,
press and hold
. Or, if you are wearing the Samsung approved earbud,
press and hold the silver button located above the earbud microphone. After
you hear the voice prompt and the beep, say the name of the person you are
calling into the phone or earbud microphone.
93
Games
Your phone’s software allows you to play the following games:
•
•
•
Flying Tight
Run for Money
Racing
Note: Games are also available on-line by launching your minibrowser.
Contact your service provider for details.
Key commands
Press the “up” arrow repeatedly to keep the plane/creature in the air,
and to move race car forward. Press the left arrow to go left. Press the right
arrow to go right
Press the “down” arrow repeatedly to lower the plane or stop the race
car.
Press to begin the game.
Press to end the game.
Press to end the game.
Flying tight
To play Flying tight:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Games.
for Flying tight. When the “start screen” is displayed,
pressing
play the game.
4. Press
takes you to the Help screen which describes how to
to begin the game.
94
Object
The object of the game is to fly the plane inside a cave through a maze of
obstacles for the longest possible time. Use the navigation key to control and
sustain the plane’s flight path and avoid the cave’s wall. Keep your thumb on the
navigation key pushing “up” repeatedly to counteract gravity that wants to pull
the plane down. The display timer shows how long you have managed to beat
the odds.
Your life depends on how long you can avoid the creatures and objects that
appear to cross your path. If you hit the cave’s wall too much, or encounter the
creatures or objects too many times (3) the game is over. You can pick up “E”
(energy) along the way to extend your life, and a “B” (bomb) to destroy all the
objects and creatures. The longer you manage to stay “alive”, the higher your
score. A high score is recorded each time you play.
Run for money
To play Run for money:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Games.
for Run for money. When the “start screen” is displayed,
pressing
play the game.
takes you to the Help screen which describes how to
4. Press
to begin the game.
Object
The object of the game is to control the creature on the skate board, avoid
collisions with motorcycles, and to pick up as many “Money” bags as you can
before the game ends. Picking up a money bag increases the “Money” count.
However, each time you are hit by a motorcycle your “Money” count resets
itself to zero. You must pick up the specified number of money bags during
each stage in order to advance to the next stage of the game. If a stage ends,
95
and you have less than the specified number of money bags the game is over. A
high score for both money and stage is recorded each time you play.
Racing
To play Racing:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
for Games.
for Racing.
up to begin the game.
Object
The object of the game is to be the first driver at the finish line. You have sixty
seconds. You are the driver. As you go you must avoid other race cars and
barrels along your course. If you hit a barrel you lose time and points. Press
the left arrow of your navigation key to go left and press right to go right.
Holding the down arrow stops your car, but the time keeps ticking. A high
score is recorded each time you play.
96
Setup
The following features allow you to personalize your phone.
Auto retry
With this option activated, your phone automatically retries the call when a
connection fails. Dependent upon your location, the number of retrys may vary.
To enable Auto Retry.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
for Setup.
for Auto Retry. The Auto Retry screen displays.
to highlight an option. The options are:
off, every 10 seconds, every 30 seconds and every 60 seconds.
5. Press
6. Pressing
to save your option.
returns you to the previous screen.
Auto answer
For further information on this feature see “Setting auto answer” on page 53.
Answer mode
With this option activated, your phone will allow you to select a specific answer
mode when you receive an incoming call. Your phone can be preset to answer
when you do any of the following:
•
•
By SEND key: You can answer the phone by pressing
.
By any key: You can answer the call by pressing any key.
To set Answer Mode:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Setup.
for Answer Mode. The Answer Mode screen displays.
97
4. Use
to highlight an option. The options are:
By SEND key, and By any key.
5. Press
to save your option.
6. Pressing
returns you to the previous screen.
Tone length
Some older phones recognize only longer tones. Therefore you may have to
change the tone length for some calls. When calling a paging system or a credit
card company remember that your phone should be set in the normal mode.
To change the tone length:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Use
for Setup.
for Tone Length. The Tone Length screen displays.
to navigate between “normal”, and “long”.
to save your option.
5. Press
6. Pressing
returns you to the previous screen.
Set System
Your phone allows you to set the preferred system. Contact your service
provider to determine the best networking methods for you.
To select the system you want to use:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Use
for Setup.
for Set System. The Set System screen displays.
to select an option. The options are:
Automatic, Home only, Analog only, AMPSHome only
5. Press
to save.
returns you to the Setup menu.
6. Pressing
98
Data/fax
Your phone is capable of sending and receiving digital data and fax calls when
connected to a computing device (laptop, desktop, hand held, palmtop, etc.)
running Windows 95, Windows 98, Windows 2000, Windows ME, or Windows
NT. Your phone functions just like a typical modem on your PC, enabling you to
use wireless data involving a wide variety of Windows software applications.
To use digital data or fax services with your phone, you will need to obtain a
digital data/fax kit from your service provider. This kit will contain the
necessary cables, software, and documentation required for you to connect
and use your phone with your computing device. To set up Data/Fax calls:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Use
for Setup.
for Data/Fax. The Data Mode screen displays.
to select an option. The options are:
data/fax off, fax for next call, fax until powered off, data for
next call, and data until powered off.
5. Press
6. Pressing
to save your option of choice.
returns you to the previous screen.
•
•
data/fax off: (No incoming Data/Fax calls can be received.)
fax for next call: (Waiting for Fax Call. No Voice Calls can be received
for next 10 minutes.)
•
•
fax until powered off: (No Voice Calls can be received.)
data for next call: (Waiting for data call. No voice calls can be
received.)
•
data until powered off: (No voice calls can be received.)
Note: The phone must be on a digital network to receive or send faxes and
data. When you are in a digital network, the
icon is displayed.
99
Receiving a fax
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Use
for Setup.
for Data/Fax.
to highlight fax for next call.
5. Press
to save this option.
In the Fax program on your PC set up Answer Mode. Click on “Receive” and
select either Automatic Receive (recommended), or Manual Receive.
Your phone is now ready to receive an incoming fax.
Note: Once you have set your phone’s mode to “fax for next call”, you cannot
receive regular voice calls until you change back to “data/fax off”. or a fax
is received.
Changing your phone back to voice calling
To change your phone back to voice calling:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Use
for Setup.
for Data/Fax.
to highlight data/fax off.
5. Press
to save this option. The screen displays “No incoming
Data/Fax calls can be received”.
Ending a fax or data call
Some of the normal ways to end a call, like closing the phone, will not end a
fax or data call. Always close the connection through the application on your
computer. Your phone will return to standby mode. Disconnecting the data
cable or turning off your phone will also end a data or fax call, but may disrupt
your computer.
100
Sending a fax or data file
When connected to a computing device, your phone allows wireless fax and
data transmissions. Your computing device software initiates the call to the
destination phone number. Your phone functions as a wireless modem to send
the fax or data file to the number designated by your PC software.
Mail Kit
Mail Kit allows you to create, send, read, and save your messages. Your phone
receives three kinds of messages: voicemail, text, and browser messages. To
access Mail kit, press
.
Note: Contact your service provider about activating the sending and receiving
short message feature. This feature will only be available if your service
provider’s network supports it.
The Mail kit contains the following eight menus:
•
•
•
•
•
•
•
•
New Messages
Voice
Inbox
Outbox
Filed Msg
WebAlert
Erase Msg
Msg Setup
Mobile Originating
SMS text messaging
Note: Check with your service provider to confirm availability of this service.
Your phone is able to send and receive text messages. When a message is
received, your phone will sound an alert tone (unless turned off) and a new
message pop-up window will be displayed on the screen.
Note: A total of 40 messages are available for messages. This memory is
shared between all messages. The number of messages that can be stored is
101
dependent upon the length of the messages. Messages that you send can
contain a total of 160 characters.
Creating SMS Text Messages
1. In standby mode, press
to display Mail Kit.
2. Press
3. Press
for New Messages. The screen displays Send To:.
to select from options. (Phone Book, T9 Word, ABC,
Symbol, 123).
•
Phone Book allows you to search either by Find Name, Find Entry, or
Relation.
4. Press
5. Press
to highlight an option, then press
to highlight, then press
to select.
to select the entry mode.
to continue.
When the information is complete press
6. Enter the message using the keypad and selected method of entry. When
finished, press . This returns you to the New Message menu.
To continue, select from the following two menus:
7. Pressing opens the Options menu. Select from the following:
Priority: Allows you to select either Urgent or Normal.
•
•
Validity: Allows you to select the period of time you wish to message to
be available to the recipient. The choices are: None, 30 min., 1 hour,
2 hours, 12 hours, 1 day, 2 days, and 3 days.
•
Send Later: Allows you to select from: None, 30 min., 1 hour,
2 hours, 12 hours, 1 day, 2 days, and 3 days.
•
•
Delivery Ack: Select either On or Off as required.
Message: Do not save. (Default). Others options are: Prompt Save
and Auto Save.
8. Pressing
opens the Action menu . Select from the following:
Send: Allows you to send the message.
OK: Allows you to save the message.
CLR: Allows return to the previous menu.
•
•
•
102
•
END: Allows you to cancel the message and end the session.
Entering text, numbers, and/or symbols
At various times when using your phone, you will need to enter text in the
display screen. Some examples would be: adding an E-mail address, storing a
name in the Phone Book, entering events in the Scheduler, or inputting text
messages. If you want to enter text on the display screen.
1. You must be in one of the given examples in order to select
view the menu options: T9 Word represented by , and
ABC represented by , and . Symbol represented by
and Numeric represented by
2. After you are in the correct menu, use the navigation key to highlight your
option choice, then press to save the option. Enter your
information and remember you can:
to
,
.
,
,
.
•
•
Press
Press
to insert a space.
to clear the last number, letter, or symbol, or
Press and hold
If you wish to change the input mode again, after pressing
options: T9 Word, ABC, Symbol, and Numeric, use the navigation key to
highlight your option choice, then press to save.
ABC: This is the text entry mode. Upper case entry mode
case entry mode icon, and initial upper case with lower case entry
mode icon: These icons represent the alphabetical text entry modes
and can also be used for multi-tap typing. For example: quickly press
three times to display the letter C, and press twice to
display the letter K.
to completely clear the input field.
to view the
•
icon, lower
•
T9 Word: This is the predictive word entry mode. You can quickly and
easily enter frequently used words.
•
Symbol: Symbol entry used with numeric keys and associated symbols.
103
•
Numeric: This is the number entry mode.
Alphabetical text entry
Alphabetical text entry characters may be entered in ABC mode, by pressing the
corresponding key to the letter you wish to enter.
Press the same key repeatedly to change between the characters represented
by each key. To change capitalization formats while entering text, press
to navigation between
,
, and
modes.
Entering numbers
Numeric mode
enables you to enter numbers into a text message.
Symbol entry
Symbol mode
enables you to enter symbols into a text message. Use
to display the options, then press the navigation key arrows up/down to
select the symbol option. When displayed, use the navigation key to manipulate
the symbols. When in Symbol input mode, press the key shown on the display
under the required symbol. Here are the list of available symbol characters:
•
•
•
•
•
•
•
•
•
!
_
\ ;
@ + ? i
#
=
:
. ¿
%
&
*
, <<
” { >>
,
}
< ( $ ^
>
-
) [ ꢀ
/
]
º
®
T9 Word text entry
T9 Word, or T9 for “text on 9 keys”, requires only one key press per letter, and
recognizes the most commonly used word of a numeric sequence.
104
For example, to enter the word “hello”, you can spell out the word by pressing
only five keys, 4-3-5-5-6. T9 Text Input recognizes the most commonly used
word for that numeric sequence is “hello”. If two or more words share the
same numeric sequence, T9 provides the most commonly used word, with the
ability to navigate to the next most commonly used word by pressing
.
Press repeatedly to display all of the available words that T9 knows.
When the word you need displays, continue to enter text in the same way, or
change to another text or character entry mode.
Note: To type words not found in the T9 mode, change the text input mode to
ABC mode. You can include numbers between letters without exiting the T9
input mode by pressing and holding the desired numeric key.
New messages
You can create text or e-mail messages to send to another party. Each message
can be sent to up to 10 numbers or E-mail addresses at a time. Message
options allow you to set a priority, validate a time period, or send a message
after a specified time. You can also file draft messages yet to be sent, into a
folder, or save sent messages to the Outbox to review their delivery status.
Note: Sending messages is only supported in digital networks. This feature
will only be available if your service provider’s network supports it.
Note: Once you commence entering the data to be sent, the number of
characters available will be displayed on the screen.
1. In standby mode, press
2. Press for New Messages. The screen displays Send To: ([This
is a required entry field], once the recipient’s data is entered it can be
sent at any time by pressing .) (Pressing permits selection
to display Mail Kit.
from the options: Phone Book, T9 Word, ABC, Symbol and 123.
•
Phone Book: Allows you to retrieve the Phone Number or e-mail
address to which the data is to be sent using the options: Find Name,
Find Entry and/or Relation.
105
•
T9 Word, ABC, Symbol and 123 are text entry modes.
3. After finding and entering the Send To: information, press
to go
to the Message menu.
4. Enter your message data, (press
when finished, press to return to the New Message menu.
5. If the same message is to be sent to multiple recipients, press
to select your text entry mode),
to
go to the Send To: menu. Entry “01” is the first destination, the address
is already entered (there are 10 destinations available.) Pressing
allows you to select the Edit option if you so require, if not.
6. Select 1, or select from the 10 multiple destinations available using the
. (Press
to open the PhoneBook or Edit options if
required), when finished press
.
7. To add additional recipient addresses, repeat the above steps. The
multiple destinations entered will be updated on the Send To: screen.
8. Press
at any time to despatch the information.
Voice
Refer to “Reviewing voice mails and text messages” on page 114, for
instructions on how to operate this option.
Responding to a Message
Note: For further information see “Message options” on page 116.
Inbox
Your phone receives incoming messages in both standby and talk modes. When
you are on a call and receive a message, your phone automatically mutes the
ringer and displays a pop-up window which displays two options: Ignore and
Text. Select Text to read the message or choose Ignore to ignore the message.
106
Outbox
Your phone stores messages in Outbox, regardless of whether the message was
successfully transmitted. If “Do Not Save” was not set in the Save Message
setting under Msg Setup, you can review, resend, or delete any message stored
in the Outbox. You can also verify if a message or E-Mail was successfully
transmitted, and at what date and time by opening the Delivery
Acknowledgement feature.
Reviewing outbox
To review outgoing messages:
1. In standby mode, press
2. Press for Outbox. A list of messages displays.
An icon displayed next to the entry number represents the transmission status:
, to display the Mail Kit menu.
•
•
•
indicates that the message was successfully transmitted and delivery
was acknowledged (Delivery Ack).
indicates that the message was transmitted but the delivery is not
confirmed.
indicates that the message transmission failed.
3. Using the
, highlight the message you wish to review and press
to select it. Across the top of the new display screen will display
“Tx Msg **”, (where ** represents the message number). The display
screen will also show the date and time of transmission, together with the
Send to #, E-Mail address, call back number, the message and the
delivery status.
4. Press
for further options. A “Sent Msg” menu will display.
•
Select “Re-send” to resend the message, press to resend with
the same message settings.
•
Select “Delete” to delete the message from Outbox.
107
Message memory capacity
Your phone can store up to 40 messages combined for all messages. The
storage capacity includes all received, sent, filed message types, VMN
(Voicemail Notification), and text messages. The number of messages stored,
depends upon the length of each message. When message memory reaches
over 75% capacity, the screen displays “Memory is **% full. Erase old
messages”, where ** is between 75% to 100%. At 100% capacity, the screen
displays a text notification and rejects additional incoming messages until you
erase the stored messages from Inbox, Outbox or Filed Msg.
Messages and lock mode
Incoming messages are received even when your phone is in Lock Mode. The
screen will display the time and date of the message but you cannot access the
message. To access the message, unlock the phone to proceed
Delivery acknowledgement
If Delivery Acknowledgement is set to “on” by using either Message Setup or
New Messages options in the Mail Kit menu, a message alert will be sent to your
phone. This Delivery Acknowledgement message alert appears on the phone’s
display screen, indicating that the message was successfully delivered, together
with the recipient’s address and the delivery date and time. This information
will be displayed on your screen until you press any key, it will include the
delivered date/time stamp, and text notification of “Message to (Send To #, or
E-mail Address) delivered.”
Note: This Delivery Acknowledgement message will not be stored into
memory as it is a “one-time” only display. Also, if multiple messages were
transmitted consecutively within a short time period, only information
relating to the last message delivered will display.
Note: Delivery Acknowledgement is a message sent from the system to
indicate that a message arrived at its destination without error.
Use the following method to review the delivery status of an outgoing message:
108
1. In standby mode, press
2. Press
to display the Mail Kit menu.
for Outbox.
3. Use the navigation key to view the delivered date/time stamp for the
transmitted message located at the bottom of the display.
4. Pressing
returns you to the previous screen.
Note: While reviewing a message, you can press
for more options.
See “Message options” on page 116.
Filed message
Your phone can store draft messages that are yet to be sent in the Filed Msg
folder. You can access this folder at a later time to edit and send the message.
Note: The memory capacity available for the Filed Msg folder is relative to the
Outbox memory capacity.
To store unsent messages to the Filed Msg folder:
1. In standby mode, press
, to display the Mail Kit menu.
2. Press
for New Messages. The Send To: screen displays. Press
for the options. Use the navigation key to highlight an option and
.
press
Note: If the Phone Book option is chosen the Find Name, Find Entry and
RelationSrch options become available. Use the navigation key to highlight
the option of choice and press
3. Enter the Send To: information and press
. The Message
screen displays.
4. Press
for the options. Use the navigation key to highlight an
option and press
.
5. Enter a message, when finished press
screen displays.
, the NEW MESSAGES
6. Press
for Action.
109
7. Press
for Filed Msg.
To access unsent messages and continue editing:
1. Press
2. Press
, to display the Mail Kit menu.
for Filed Msg. The number of pending messages display
next to the Filed Msg text. The filed messages will display in order.
3. Press to highlight the message, and press to open.
4. Follow the steps shown in “WebAlert” on page 107, to edit and resend
the message.
Web Alert
Your phone alerts you with incoming browser messages. When a new message
arrives, your phone will display a text notification together with an audible
alert. You can access Web Alert from the Mail Kit menu:
1. In standby mode, press
, to display Mail Kit.
2. Press
3. Press
4. Press
to highlight option.
for WebAlert.
to complete the action.
Note: Contact your service provider for availability.
Erase message
1. In standby mode, press
, to display Mail Kit.
2. Press
3. Press
for Erase Msg.
to highlight an option from those offered:
Voice, OldInbox, NewInbox, Outbox, Filed, and All Messages.
4. Press
to complete the action.
110
Message setup
1. In standby mode, press
, to display Mail Kit.
2. Press
3. Press
for Message setup.
to highlight an option from those offered:
General, and New Messages.
4. Press
to complete the action.
You can preset a number of options for general settings or new messages. The
message indicator is displayed and remains on the screen until you listen to the
new voicemail message, read the New BrowserMsg or Text Msg.
General
Offers a number of separate features, Scroll Timer, Msg. Reminder, Message
Volume, Ringer Type, and Voice Mail #.
Scroll Timer
Scroll Timer allows you to select the amount of time you would like your scroll
to be available before closing.
The choices are: Off, 1/2/3/4/5 seconds.
Msg. Reminder
Message Reminder allows you to select the number of times you would like to
be reminded that you have a message.
The choices are: Off, Once, Every 2 min.
111
Message Volume
1. When selected, the screen immediately displays the volume icon
,
the bars of which will change according to the setting chosen. When the
desired volume setting is reached, press to save.
2. Press to return to the previous menu at any time.
Note: When the lowest volume setting is reached, the phone automatically
goes into vibrate mode, physically alerting you to this option.
Ringer Type
Four options can be found under this heading. All have five monotone ringer
types and fifteen melody tones.
1. Use the
to locate and navigate through the ringer types. Each tone
plays as you navigate through the options.
2. When the desired ringer type plays, press
to save the setting.
Ringer Type — Voice Mail
Refer to “Ringer Type” on page 112 for instructions on how to operate this
option.
Ringer Type — Page
Refer to “Ringer Type” on page 112 for instructions on how to operate this
option.
Ringer Type — Text
Refer to “Ringer Type” on page 112 for instructions on how to operate this
option.
Ringer Type — Browser Msg
Refer to “Ringer Type” on page 112 for instructions on how to operate this
option.
112
Voice Mail #
Voice Mail # allows you to input names and numbers for Voice Mail.
New Message
Offers a number of options. Each option offers different features.
Callback #
Press
to automatically call the number displayed on the screen.
Save Message
You are offered three options. Select
Prompt Save - saves the message.
Do Not Save - does not save the message.
to save the setting.
Auto Save - automatically saves the created message to the Outbox after the
message is transmitted.
Entry Method
You can navigate between Alphabet and T9 Word (predictive keypad) for the
default setting. Select
to save the setting.
Delivery Ack.
Use the navigation key to highlight On or Off. Select
to save the setting.
Canned Msg.
There are a total of 10 frequently used canned messages pre-programmed into
your phone. You can select the number that is associated with each canned
message, and press
to edit it.
Once you have completed the editing of a canned message, press
to
save. For further information see “List of main and sub menus” on page 25.
113
Receiving a message in standby mode
When your phone receives incoming messages in standby mode, the ringer
sounds, (unless it is turned off), and the screen displays: “New Voicemail”,
“New Text”, “New Page” or “New BrowserMsg”. The message icon is
displayed, and remains on display until you listen to, or read, the new message.
Receiving a message while on a call
When you receive message when you are on a call, the New Messages screen
displays two options: “Ignore” and“ Text”. The “closed envelope” icon
is displayed.
You can easily review the new message while on the call by just pressing
. Your call will not be disconnected, and you can ask the other party to
wait while you review the message. If you wish to ignore the message, just
select that option and continue with your call.
Reviewing voice mails and text
messages
When a message arrives, you can recall the sender’s call back number if it is
available, by pressing
. To review the message, press
. The Inbox
Msg list provides options for reviewing the sender’s name, number, date and
time information, and the message.
114
Reviewing stored voicemail and
text messages in standby mode
1. In standby mode, press
, to display the Mail Kit menu. The
number of received or sent messages displays next to the associated
message type in the menu.
2. Press
for Voice. The date and time for the last voice mail
message received display with a notification of the number of new voice
mail messages.
•You can press
voice mails.
twice to call your mail box directly to review
•You can press
for Inbox. A list of messages displays.
•
•
next to an entry number indicates an urgent message.
next to an entry number indicates that the message has already
been read.
3. Use the
arrows to highlight the message you wish to review, press
to open it.
•While reviewing the message, you can press the
to locate the
message information such as date and time, sender’s call back
number, senders number, E-Mail address, and message.
However, if you wait a few seconds the phone will automatically
scroll through the display.
•To review other messages. Using the
press the appropriate
arrow to the right to review the next message, or to the left to
review the previous message.
4. Pressing
returns you to the previous screen.
Note: When reviewing a message, you can press
for further options.
For further information see “Message options” on page 116.
Note: When in standby mode, press and hold down
to automatically
dial voice mail.
115
Message options
When reviewing Messages, the menu provides a number of options. You can
return a call or text message to the phone number, or e-mail address in that
message, or you can forward the message to another.
1. In standby mode, press
, to display the Mail Kit menu. A number
of received or sent messages displays next to the associated message type
in the menu.
2. For Text messages use the
review, press to open it.
3. Press to view the following options:
to locate the message you wish to
“Reply”, “Forward”, “Delete”, “Save Address” and “Save cb#”
•Reply: to reply to the sender. The phone accesses the “New
Message” menu and copies the sender’s originating address to the
“Send To:” field.
•Forward: to forward the message to another. The phone accesses
the “New Message” menu, and copies the sender’s message
(body) to the “Message” field.
•Delete: to delete the message from the Inbox.
•Save addr: to save the sender’s e-mail address to the Phone Book.
The address is automatically copied into the Add Entry or E-mail
Entry field. For further information see “Add entry” on page 46
and “Adding an e-mail address” on page 54 for assistance on
saving phone numbers or E-mail addresses to the Phone Book.
•Save cb#: to save the call back number to the Phone Book. The
number is automatically copied to the Add Entry field.
4. Pressing
returns you to the previous Inbox messages list screen.
116
Security
Your phone provides security options, including a user-programmable lock
code and emergency/secret phone number features. To access the Security
menu in standby mode, press
,
, and then enter the 4-digit lock
code (normally the lock code is the last 4-digits of your phone
number). Press the associated digit key to access one of the following Security
options:
•
•
•
•
•
•
•
1. Lock Mode
2. Restrict
3. Lockcode
4. Emergency #
5. Send PIN
6. Clear MEM
7. Reset Phone
Lock mode
Locking the phone limits all outgoing calls except calls to the three hard-coded
emergency numbers (911, *911 and #911), and the three user-programmable
emergency/secret numbers.
You can lock the phone manually during use, or set the phone to lock
automatically when it is turned on. When the phone is in Lock Mode, you can
answer incoming calls, but you must unlock the phone to place outgoing calls
(except to emergency and secret numbers).
117
Locking the phone
The Security menu allows you to lock the phone manually or automatically
when powering on your phone or to leave the phone unlocked.
To lock the phone:
1. In standby mode, press
to display the main menu.
for Security and enter your current lock code.
for Lock Mode. Use the to locate an option:
•Never: The phone remains unlocked.
2. Press
3. Press
•Now: The phone locks immediately and stays locked until the lock
code is entered.
•On Power-Up: The phone locks automatically the next time your
phone is powered on and stays locked until the lock code is
entered.
4. Press
to save the setting.
Unlocking the phone
When the phone is locked, pressing
,
, or
causes the
phone to display “User Lock”. Enter the phone’s lock code, and the phone is
immediately unlocked.
Calling in lock mode
You can place emergency calls and to the 3 confidential numbers you
programmed in the lock mode. To place normal outgoing calls in lock mode,
enter the lock code to unlock the phone, and then call the phone number.
To place an outgoing call in lock mode:
To call an emergency or confidential number, enter the number and then press
.
118
Restricting the use of your phone
This feature allows you to restrict the use of your phone.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Use the
for Security. Enter your current lock code.
for Restrict. The ‘Restrict Phone’ screen displays.
to locate the ‘Yes’ or ‘No’ option offered, and press
to save the option of choice.
5. Pressing
returns you to the previous screen.
Lock code
The default lock code for your phone is generally the last four digits of your
phone number. You can enter a personal lock code and later change the lock
code as often as you like.
To enter a new lock code:
1. In standby mode, press
2. Press for Security.
3. Enter your current lock code.
4. Press for Lock Code. The screen prompts “ENTER NEW
to display the main menu.
CODE”. Enter a new, 4-digit lock code by pressing the keypad. You will
be prompted to “RE-ENTER NEW CODE”. Enter the same 4-digit lock
code.
5. Press
to save the new lock code, or press
to exit.
Note: Your phone does not allow viewing of the lock code unless you know
the lock code (this is for obvious security reasons). So, if you change the
lock code, be sure to write down or memorize the new code.
119
Emergency #’s
Your phone provides the option of storing three emergency numbers. Each
number can be up to 32 digits.
All emergency numbers can be manually called at any time even when your
phone is locked or restricted. This can be a useful feature for controlling what
numbers can be called from your phone.
Note: Emergency numbers 911, *911, and #911 are hard-coded to your
phone. You can dial these numbers by pressing
after number entry
at any time, even when the phone is locked or restricted. If you call 911 an
audible tone is heard and an “Emergency” prompt is displayed during
the duration of the call.
Because of various transmission methods, network parameters, and user
settings used to complete a call from your wireless phone, a connection cannot
always be guaranteed.
Therefore, emergency calling may not be available on all wireless networks at
all times.
DO NOT depend on this phone as a primary method of calling 911 or for any
other essential or emergency communications.
Remember to always turn your phone on and check for adequate signal
strength before placing a call.
Storing emergency numbers
To store emergency numbers:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
for Security and enter your current lock code.
for Emergency #.
,
, or
to select from the three entry openings.
120
5. Enter the emergency number. Up to 32 digits can be entered for each
number.
6. Press
7. Press
to save the number entered.
to exit and return to the previous menu.
Calling emergency numbers in lock mode
To call emergency numbers in lock mode:
1. In standby mode, use the keypad to enter the emergency number.
2. Press
to place the call.
Send PIN
The PIN (Personal Identification Number) feature prevents your phone from
being used by unauthorized persons. Contact your service provider for
complete information on this feature.
To set your phone to prompt for your PIN to be sent to the system whenever a
call is placed.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Security and enter your current lock code.
for Send PIN.
4. Choose between Never or Prompt.
5. Press to save.
Note: Your service provider must enable this feature and assign you a PIN in
order for this feature to work.
121
Clear MEM
Clear MEM erases your Phone Book and Voice Dial recordings. Personal
settings (the call log, Mail Kit messages, Schedules, or other phone feature
settings), are unaffected by clearing the memory on your phone. This feature
is useful if you want to give your phone to a friend or family member, or if
you want to erase all of your phone numbers. To clear your phone’s
memory:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Security and enter your current lock code.
for Clear MEM. A confirmation prompt “Proceed” will
display.
4. Press
the operation.
to clear the phone’s memory, or press
to cancel
Note: After a few seconds, a prompt “Erased” message will display and the
phone will return to standby mode.
Resetting your phone
Resetting the phone returns all setup options to the factory default settings.
To reset the phone:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Security and enter your current lock code.
for Reset Phone. A confirmation prompt displays
asking if you want to “Proceed”.
4. Press to reset the phone or press
operation.
to cancel the
122
In-Use Menu
Your phone includes both a standby menu and an In-Use menu. The In-Use
menu is displayed by pressing
while the phone is being used during a
call in progress. The In-Use menu options are:
•
•
Mute/Quit - Mutes or (Un)mutes your end of a phone conversation so
that the recipient can hear nothing.
Calls - Checks your call log for outgoing, incoming, and missed calls.
You can also erase the logs from this menu.
•
•
Phone Book - Accesses the Phone Book menu options.
Silent/Quit - Activates or deactivates the “Silent keypad” feature. When
set to the silent mode, your keypad’s tone is not sent out to the calling
party. However, this feature should not be used when you access
automated services that require you to select options, or enter numbers
using the keypad.
•
Send Tel # - Sends your phone number to the calling party or
automated services.
•
•
My Phone # - Displays the phone’s own number.
Version - Displays the version of the software and hardware that is being
used on the phone.
123
Usage guidelines:
all about performance and safety
Understanding Signal Strength
The quality of each call you make or receive, is dependent upon the signal
strength in your area. Your phone informs you of the current signal strength by
displaying a icon. The more bars displayed, the stronger the signal. The signal
strength indicator (
) displays in the upper left corner of your display
screen. The voice quality of your phone is always clearest when the antenna is
fully raised. If you’re inside a building, reception may be better near a window.
Understanding the Power Save Mode
If you are trying to use your phone in an area where the signal is too weak, the
Power Save feature automatically activates to conserve battery power when you
have been unable to pick up a signal for 15 minutes. If your phone is on, it
periodically rechecks service availability. To manually check, press any key. A
message is displayed on the screen any time you activate Power Save. When a
signal is found, your phone returns to standby mode.
Understanding how Your Phone
Operates
Your phone is basically a radio transmitter and receiver. When it is turned on,
it receives and transmits radio frequency (RF) signals. When your phone is in
use, the system handling your call controls the power level. This power can
range from 0.006 watts to 0.2 watts in digital mode.
Specifications are Subject to Change
The information contained in this manual is believed to be correct at the time
of printing, however, Samsung reserves the right to change or modify any of the
specifications without notice or obligation to update existing units.
124
Exposure To Radio Frequency Signals
Your wireless handheld portable telephone is a low power radio transmitter
and receiver. When it is ON, it receives and also transmits radio frequency (RF)
signals
In August, 1996. the Federal Communications Commission (FCC) adopted RF
exposer guidelines with safety levels for hand-held wireless phones. Those
guidelines are consistent with the safety standards previously set by both U.S.
and international standards bodies:
•
•
•
ANSI C95.1 (1992)
NCRP Report 86 (1986)
ICNIRP (1996)
Those standards were based on comprehensive and periodic evaluations of the
relevant scientific literature. For example, over 120 scientists, engineers, and
physicians from universities, government health agencies, and industry
reviewed the available body of research to develop the ANSI standard (C95.1).
The design of your phone complies with the FCC guidelines (and those
standards).
Body-worn Operation
To maintain compliance with FCC RF exposure guidelines, if you wear a
handset on your body, use a Samsung supplied or approved carrying case,
holster or other body-worn accessory. If you do not use a body-worn
accessory, ensure the antenna is at least one inch (2.5 centimeters) from your
body when transmitting. Use of non-Samsung approved accessories may violate
FCC RF exposure guidelines.
Antenna Care
Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the phone and may
violate FCC regulations.
125
Phone Operation
NORMAL POSITION: Hold the phone as you would any other telephone with the
antenna pointed up and over your shoulder.
Tips on Efficient Operation
For your phone to operate most efficiently:
•
•
Extend your antenna fully.
Do not touch the antenna unnecessarily when the phone is in use.
Contact with the antenna affects call quality and may cause the phone to
operate at a higher power level than otherwise needed.
Operating a Motor Vehicle
Check the laws and regulations on the use of wireless telephones in the areas
where you drive. Always obey them. Also, if using your phone while driving,
please:
•
•
Give full attention to driving - driving safely is your first responsibility.
Use hands free operation, if available.
Electronic Devices
Most modern electronic equipment is shielded from RF signals. However,
certain electronic equipment may not be shielded against the RF signals from
your wireless phone.
Pacemakers
The Health Industry Manufacturers Association recommends that a minimum
separation of six (6”) inches be maintained between a handheld wireless
phone and a pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research.
Persons with pacemakers:
126
•
Should ALWAYS keep the phone more than six inches from their
pacemaker when the phone is turned ON;
•
•
Should not carry the phone in a breast pocket;
Should use the ear opposite the pacemaker to minimize the potential for
interference;
•
If you have any reason to suspect that interference is taking place, turn
your phone OFF immediately.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your
device to determine if they are adequately shielded from external RF energy.
Your physician may be able to assist you in obtaining this information.
Turn your phone Off in health care facilities when any regulations posted in
these areas instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles. Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer of any
equipment that you add to your vehicle.
Posted Facilities
Turn your phone Off in any facility where posted notices so require.
Aircraft
FCC regulations prohibit using your phone while in the air. Switch Off your
phone before boarding an aircraft.
127
Blasting Areas
To avoid interfering with blasting operations, turn your phone Off when in a
“blasting area” or in areas posted: “Turn off two-way radio”. Obey all signs and
instructions.
Potentially Explosive Atmospheres
Turn your phone Off when in any area with a potential explosive atmosphere
and obey all signs and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere are often, but not always clearly
marked. They include fueling areas such as gasoline stations; below deck on
boats; fuel or chemical transfers or storage facilities; vehicles using liquefied
petroleum gas (such as propane or butane); areas where the air contains
chemicals or particles, such as grain, dust, or metal powders; any other area
where you would normally be advised to turn Off your vehicle engine.
For Vehicles Equipped with an Air bag
An air bag inflates with tremendous force. DO NOT place objects, including
both installed or portable wireless equipment, in the area over the air bag or in
the air bag deployment area. If in-vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
128
Storing your phone
You must not store or carry your phone, its parts, or accessories in the same
compartment or other area where there flammable liquids, gases, or explosive
or flammable materials.
Cautions
Any changes or modifications to your phone not expressly approved in this
document could void your warranty for this equipment and void your authority
to operate this equipment.
Only use approved batteries, antennas, and chargers. The use of any
unauthorized accessories may be dangerous and will invalidate the phone
warranty if said accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of hardware and can
be broken. Use common-sense guidelines to avoid dropping, hitting, bending,
or sitting on it.
129
Your Phone as a Network Device
Your telephone requires a service provider to send and receive calls. Your
phone is only one part of a system or “network” of devices that makes it
possible for you to send and receive calls, text messages, voice message, access
the Internet using the minibrowser, and to take advantage of all of the other
services and features available when your phone is used with your service
provider.
Your phone will always try your call using your home system, but if this is
unavailable, then the phone will use the preferred roaming system.
If you cannot roam, your call will not be connected and the
icon is
displayed. In some service areas, an operator may come on the line asking you
how you would like to pay for the call.
To make all of the features available to you, your phone is designed by
Samsung and your service provider to allow your service provider to send (at
any time) a variety or information and messages to your phone. You may think
of this as an over the air service to your phone. During an over-the-air
programming session, your phone may display the following messages:
•
“Search... Download” - this message means the phone is looking for the
data to download.
•
“Progress Download” - this message means the phone is downloading
data. Do not turn your phone off while this is occurring. See the
CAUTION below.
•
•
“Download Success” - this message means that your phone has been
successfully reprogrammed. You can now continue to use your phone as
you normally do.
“Download Failed” - if this message appears contact your service
provider.
130
CAUTION: If you turn off your phone during a download, your phone (or
some features) may not work properly in the network. If this happens don’t
worry, contact your service provider for help in correcting the problem.
131
Acknowledging Special
Precautions
and Industry Canada Notice
Only use approved batteries, antennas, and chargers. The use of any
unauthorized accessories may be dangerous and will invalidate the phone
warranty if said accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of hardware and can
be broken. Use common-sense guidelines to avoid dropping, hitting, bending
or sitting on it.
Information to User
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation; if this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•
•
•
Reorient / relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit difference from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
132
Samsung Phone and Battery
Specifications
Dual Band/Tri Mode:CDMA 1.9GHz / CDMA 800 MHz/AMPS 800 MHz
Display Screen:Graphical LCD up to 5 lines w/1 dedicated Icon Line)
Battery Type:Extended: Lithium-Ion
PCS Antenna:Retractable, user-replaceable
Samsung Phone with Standard Battery
Dimensions (H x W x D:)4.1 x 1.8 x 0.8 inches
Weight:3.8 oz. (troy)
Talk Time Digital:Up to 170 minutes
Analog:Up to 70 minutes)
Standby Time Digital:Up to 140 hours
Analog:15 hours
Samsung SCH-N370 Phone with
Extended Battery
Dimensions (H x W x D:)4.5 x 1.8 x 1.0 inches
Weight:4.1 oz. (troy)
Talk Time Digital:Up to 230 minutes
Analog:Up to 100 minutes
Standby Time Digital:Up to 200 hours
Analog:23 hours
Owner's Record
The model number, regulatory number and serial number are located on a
nameplate inside the battery compartment. Record the serial number in the
space provided below. This will be helpful if you need to contact us about your
phone in the future.
Model:
Serial No.:
133
User Guide Proprietary Notice
CDMA Technology is licensed by QUALCOMM Incorporated under one or more
of the following Patents:
4,901,3075,109,3905,267,2625,416,797
5,506,8655,544,1965,657,4205,101,501
5,267,2615,414,7965,504,7735,535,239
5,600,7545,778,338 5,228,054 5,337,338
5,710,7845,056,109 5,568,4835,659,569
5,490,1655,511,073
®
T9 Word Text Input is licensed by Tegic Communications and is covered by
U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents
pending.
Licensed by Qualcomm Incorporated under one or more of the following
patents: U.S. Patent No. 4,901,307; 5,056,109; 5,099,204; 5,101,501;
5,103,459; 5,107,225; 5,109,390.
Openwave® is a registered Trademark of Openwave, Inc.
134
Limited Warranty
1. What is covered and for how long?
Samsung Telecommunications America, Inc. (Samsung) warrants the
original purchaser that Samsung’s phones and accessories are free from
defects in material and workmanship under normal use and service for a
period commencing on the date of purchase and continuing for the
specified period of time after the date:
•Samsung Phone - 1 year
•Batteries - 1 year
•Leather Cases - Defect-free at time of purchase.
•Other Phone Accessories - 1 year
2. What is not covered?
The limited warranty is conditioned upon proper use of the product by
the purchaser. This limited warranty does not cover:
•Defects or damage resulting from accident, misuse, abuse, neglect,
unusual physical, electrical, or electromechanical stress,
modifications of any part of the product, including antenna or
cosmetic damage.
•Equipment that has the serial number removed or made illegible.
•All plastic surfaces and other externally exposed parts that are
scratched or damaged due to normal usage.
•Malfunctions resulting from the use of the product in conjunction
with the accessories, products, ancillary, or peripheral equipment
not furnished or approved by Samsung.
•Defects or damage from improper testing, operation, maintenance,
installation, adjustment and service of products.
•The limited warranty covers batteries only if the battery falls below
80% of rated capacity or the battery leaks and this limited warranty
does not cover any battery if (i) the battery has been charged by a
135
battery charger not specified or approved by Samsung for charging
the battery, (ii) any of the seals on the battery are broken or show
evidence of tampering, or (iii) the battery has been used in
equipment other than the Samsung phone for which it is specified.
3. What are Samsung’s Obligations?
During the applicable warranty period, Samsung will repair or replace at
Samsung’s sole option, without charge to purchaser, any defective
component part of the phone or accessory. To obtain service under this
limited warranty, purchaser must return the product to an authorized
Samsung phone service facility in an adequate container for shipping,
accompanied by the purchaser’s sales receipt or comparable proof of
sale showing the date of purchase, the serial number of the product, and
the seller’s name and address. To obtain information on where to deliver
the phone or accessory, call your service provider or Samsung Customer
Care at (888) 987-4357. Upon receipt, Samsung will promptly repair the
defective product. Samsung may, at Samsung’s sole option, use rebuilt,
reconditioned, or new parts or components when repairing any product
or replace a product with a rebuilt, reconditioned, or new product.
Repaired products will be warranted for a period equal to the remainder
of the original limited warranty on the original product or for 90 days,
whatever is longer. All replaced parts, components, boards, and
equipment becomes the property of Samsung. If Samsung determines
that any product is not covered by this limited warranty, purchaser must
pay all parts, shipping, and labor charges for the repair or return of said
product.
4. What are the limits of Samsung’s liability?
The warranties given in this limited warranty are in lieu of all other
warranties, expressed or implied, including, but not limited to, any
warranties of merchantability or fitness for a particular purpose, and are
limited to the duration of this limited warranty. Except to the extent
136
prohibited by applicable law. Samsung shall not be liable for any special,
incidental, consequential, indirect or similar damages, loss of profits,
damages to purchaser’s property or injury to purchaser or other parties
arising out of the use, misuse, or inability to use any Samsung phone or
accessory, breach of warranty, breach of contract, or negligence,
including but not limited to Samsung’s phones and accessories. This
limited warranty shall not extend to anyone other than the original
purchaser of this product and states the purchaser’s exclusive remedy. If
any portion of this warranty is illegal or unenforceable by reason of law,
such partial illegality or unenforceability shall not affect the
enforceability of the remainder of this limited warranty which purchaser
acknowledges is and will always be construed to be limited by its terms
or as limited as the law permits.
This limited warranty allocates risk of product failure between purchaser
and Samsung, and Samsung’s products pricing reflects this allocation of
risk and the limitations of liability contained in this limited warranty. The
agents, employees, distributors, and dealers of Samsung are not
authorized to make modifications to this limited warranty, or make
additional warranties binding on Samsung. Accordingly, additional
statements such as dealer advertising or presentations, whether oral or
written, do not constitute warranties by Samsung and should not be
relied upon.
137
5. How does state or territorial law apply to this warranty?
Some states or provinces do not allow the exclusion or limitations of
incidental or consequential damages or how long implied warranty lasts,
so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights. You may also have other
rights which vary from one jurisdiction to another.
Samsung Telecommunications America, Inc.
1130 East Arapaho Road
Richardson, Texas 75081
(888) 987-HELP (4357)
138
|