SCH-a530 Series
D I G I T A L
D U A L - B A N D
T E L E P H O N E
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
®
RSA is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties;
Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES
THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT
OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE
PRODUCT; THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT
PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL
SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE
BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS.
Introduction to the SCH-a530 phone
Congratulations on the purchase of your SCH-a530 phone. Using the latest
digital technology, your new phone operates on the same basis as other
wireless phones while providing superior resonance and tone quality.
The SCH-a530 phone is packed with productive features that are easy to use.
Here are some of them:
•
•
•
•
•
Operates in 1900 MHz digital PCS and 800 MHz digital CDMA.
Voice Dialing – 20 locations
Whisper mode feature
Fetures Get it Now
User friendly display with dedicated icons for signal strength, service,
roaming, messages, vibrator, location service, and battery states.
Monotone ring types - 5, melody tones -10.
Distinctive ringer types for voice, message, and alarm calls
Distinctive ringer volumes for voice, message, and alarm calls
Phone Book Memory - 999 Locations
•
•
•
•
•
•
•
•
•
•
•
•
Call Logs - 20 Locations each for outgoing, incoming, and missed calls
Internet MiniBrowser
Pause dialing for tele-services
Fast ringer mute during incoming call
Alarm clock with programmable alarm
One, Two, and Three-touch dialing
Easily mute the microphone during conversation
Security features including call restriction, emergency/secret number
capability, and lock mode
•
•
•
Fax and Data capability
External LCD display
Selectable English/Spanish user interface
How To Use This User Guide
This user guide explains your Samsung SCH-a530 phone operations through
easy-to-follow instructions and illustrations.
We’ve included some important safety and usage information that you should
know before using your phone.
If you still have questions, we’ll be happy to answer them. Just call our
Samsung Customer Care Center toll-free at 1.888.987.HELP (4357).
Disclaimer of Warranties;
LED indicator ....................................................................... 18
Right soft key........................................................................ 18
Left soft key .......................................................................... 18
Microphone ......................................................................... 18
Numeric keypad ................................................................... 18
Speaker................................................................................ 18
Send key............................................................................... 19
Navigation ............................................................................ 19
Get it now............................................................................. 19
Display screens .................................................................... 20
Liquid crystal display............................................................ 20
Display screen icons............................................................. 20
Installing the battery............................................................. 22
7
Input mode ...........................................................................25
Power save mode ..................................................................25
Vibrate mode.........................................................................27
Getting Started......................................................... 27
Getting service.......................................................................27
Turning your phone on .........................................................28
Turning your phone off .........................................................28
Several ways to answer a call.................................................29
List of main and sub menus..................................... 29
Accessing menus using the navigation key.............................32
Returning to the previous menu ............................................33
Accessing menus using shortcut numbers .............................33
Calls ........................................................................ 33
Outgoing ...............................................................................33
Incoming...............................................................................34
8
Adding pauses ...................................................................... 44
Storing pauses in a phone book entry................................... 45
Pause dialing from a stored entry ......................................... 45
Manual pause calling............................................................ 45
Erasing individual phone book entries ................................. 46
Erasing your phone book ..................................................... 46
Editing an existing e-mail address ........................................ 47
Setting speed dial ................................................................. 47
Storing incoming phone numbers at the end of a call........... 48
Storing phone numbers from call logs.................................. 48
Shortcuts to storing phone numbers..................................... 49
One-touch dialing................................................................. 49
Two-touch dialing ................................................................ 49
9
Symbol entry .........................................................................53
Inbox ....................................................................................55
Draft message........................................................................57
Web Alert ..............................................................................58
Erase message.......................................................................58
Message setting .....................................................................59
Receiving a message in standby mode ...................................61
Receiving a message while on a call ......................................61
Reviewing voice mails and text messages...............................61
Reviewing stored voicemail and
text messages in standby mode..............................................61
Message options....................................................................62
Mobile web.............................................................. 64
Launching the minibrowser...................................................64
Exiting the web/minibrowser.................................................65
10
Jump to date......................................................................... 71
Memo pad............................................................................ 72
Count down.......................................................................... 72
How to view, edit, add or erase a count down timer ............. 73
Alarm clock.......................................................................... 73
World time ........................................................................... 74
Checking current time world wide........................................ 74
Calculator............................................................................. 75
Display.....................................................................76
Animation............................................................................. 76
Banner ................................................................................. 77
Backlight.............................................................................. 77
Contrast................................................................................ 78
Auto hyphen ......................................................................... 78
11
Call screen ............................................................................89
Setup ....................................................................... 89
Location................................................................................89
Network ................................................................................90
Data/fax.................................................................................90
Security.................................................................................93
Lock phone...........................................................................93
Restricting the use of your phone..........................................95
Lock code .............................................................................95
Emergency number...............................................................96
Erase memory.......................................................................97
Resetting your phone.............................................................98
Call answer............................................................................98
12
Version............................................................................... 102
In-Use Menu ..........................................................102
Usage guidelines:
All about performance and safety ..........................104
Getting the Most Out of Your Reception.............................. 104
Maintaining Safe Use of and Access to Your Phone ............. 106
Caring for the Battery ......................................................... 108
Acknowledging Special Precautions and FCC ...................... 110
Specific Absorption Rates (SAR) for Wireless Phones......... 111
FDA Consumer Update........................................................ 112
Owner's Record ................................................................. 124
User Guide Proprietary Notice ............................................ 124
Limited Warranty ...................................................125
13
14
Getting to know your phone
Antenna
The antenna is a device for transmitting and receiving signals. The shape and
size of the antenna is determined, in part, by the frequency of the signals that
they receive. An antenna makes the call sound clearer when it is fully extended.
Use only in the normal position and do not touch the antenna unnecessarily
when the phone is active.
Backlight features
Your keypad has user settable backlighting for easy visibility.
Clear key
The
key is used to erase/clear numbers or characters that may have been
incorrectly entered. Or, you can use it to return to a previous screen.
•If you enter an incorrect number or character on the display
screen, press
once briefly.
•To erase all digits or characters from the display screen, press
for two seconds.
•To back up one menu level, press
once briefly.
•To return to standby mode from any menu, press
seconds.
for two
End key
This
key is utilized in several ways:
•Press and hold
•Press and hold
to turn on your phone.
to turn off your phone.
•Press
once to disconnect a call, return to standby mode, or
cancel any input.
17
Headset connector
This is where the optional hands-free headset is connected. The headset
includes an earbud and microphone in a convenient, lightweight unit so you
can talk without using your hands.
•Before inserting the hands-free headset connector to your phone,
gently pry open the top of the cover to expose the headset
connector.
LED indicator
The LED indicator (located on the front cover towards the bottom of your
phone) flashes to indicate an incoming call or message. When you have the
phone ringer set to off, the LED indicator notifies you of an incoming call or
message.
•The LED indicator lights momentarily when you power up the
phone.
Right soft key
Press to do the following:
•View message
•Select option
•Save/ok key
Left soft key
Press to enter the Main menu.
Microphone
The microphone is used for conversation and recording.
Numeric keypad
Use these keys to enter text, numbers, and special characters.
Speaker
The speaker is for listening to voice conversations.
18
Send key
The
key performs several useful functions:
•Press once to answer calls.
•Enter a number and press
once to connect a call.
•Press
twice in standby mode to redial the last recent call
number.
Navigation
The Navigation key
allows you to locate different menu options by pressing
in the appropriate direction.
Get it now
To access Get it Now:
1. Press the Get it Now button.
2. The Shopping Cart icon appears.
3. Press the Get it Now button again. The following logo and start option
appears:
4. Press the Get it Now button. The following Get it Now options appear:
•Get Games
•Get Tones
•Get Going
•Get Fun
•Get Mail
•Get Pix
5. Highlight the category of your choice.
6. Press the Get it Now button.
7. Select the application you want to download and follow the instructions
on the screen.
19
Display screens
Your phone has two display screens:
The display screen on the front of your phone is comprised of three areas:
•An upper line of stationary icons
•The middle area showing the time of day
•The lower line showing the date
The display screen on the inside of your phone is comprised of three areas:
•An upper line of stationary icons
•The graphic area in the middle
•The lower line of text shows left and right softkey options
Liquid crystal display
The top line of icons on the liquid crystal display (LCD), appear according to
the phone’s operating mode.
•Lower area of the LCD: Displays date, time, and in-use
information.
•Folder open: Press any key, the LCD will dim for 8 seconds
then go off
•During conversation: While talking, the LCD will dim for 1
minute then go off.
Note: Your front LCD backlight will darken while in standby mode when
your folder is closed. Press and hold the side volume key to luminate.
Display screen icons
Signal strength: This icon always appears when your phone is on. It
shows your current signal strength. More lines indicate more signal
strength.
20
Service indicator: This icon indicates a call is in progress. When
the phone is calling a number, this icon will flash until the call is
connected.
No service indicator: This icon indicates your phone cannot find a
signal because you’re outside a service area. You cannot make or
receive calls. Wait a little while for a signal or move into an open area.
Note: The no service indicator icon will always appear when you turn on your
phone. As soon as service is located, the indicator will disappear.
Roam: This icon is your extended roaming indicator. Roaming
occurs when you use your phone outside your home area. While
roaming, another service provider's system handles your call, so the
service rate for the call may be higher than the rate for calls made
within your home area. Please refer to the price plan information
from your carrier for more detail regarding your service rates.
New Message: This icon appears when a new voice, text, page or
web alert message is received.
High speed data: This icon indicates that your phone is sending or
receiving data at a high speed.
Vibrate mode: This icon indicates that an incoming call will make
the phone vibrate rather than ring.
Battery strength: This icon always displays when your phone is
active, it displays your battery charge level. The more black bars you
see, the greater the charge. When the battery becomes very low, a
flashing empty battery icon displays and the phone sounds an audible
alert; this indicates that your phone is about to turn itself off.
Alarm clock: This icon displays when you have your alarm clock set.
21
Ringer silent: This icon indicates that your phones ringer is set to
silent.
GPS (911 only): This icon represents Global Positioning Service
(GPS) for 911.
GPS: This icon indicates GPS is on for location.
Silent mode: This is the icon for silent mode.
Installing the battery
Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter. The phone can be used while the
battery is charging, but must be fully charged the first time you use your
phone otherwise the battery could be damaged.
To attach the battery to your phone:
1. Gently place the battery into the provided slots on the underside of the
phone.
2. Gently push the top end of the battery down (The top end of the battery
displays the word Samsung in raised letters.) until you hear it click into
place.
22
Removing the battery
To remove the battery from your phone:
1. Turn the phone off by pressing and holding
.
2. Push the battery release latch up and pull the battery away from the latch.
3. Lift the battery away from the phone.
Charging the battery
Your phone is powered by a rechargeable standard Li-Ion battery. Only use
Samsung-approved travel adaptors and batteries. These adaptors are designed
to maximize battery life. Using other adaptors may invalidate your
warranty and may cause damage.
When the phone has finished charging it can be disconnected.
Travel adapter
Use the adaptor outlet to connect your phone to a wireless data device or a
hands-free car kit (both sold separately). The adaptor outlet is located at the
bottom of the phone.
Using the travel adaptor
The travel adaptor allows you to charge your phone’s battery from any standard
110/220 free volt AC wall outlet. Also, using the travel adaptor allows you to
make a phone call while the battery is charging.
Follow these steps to use you travel adapter:
1. With the battery in position in the phone, attach the cord from the travel
adaptor by plugging it into the adaptor outlet at the bottom of the phone.
2. Connect the adaptor to a standard 110/220 free volt AC wall outlet. The
battery will begin charging immediately, and the LED will light and
remain red.
3. The LED indicates the status of the battery being charged.
23
•Red indicates that the battery is charging.
•Green indicates that the battery is fully charged.
4. You can make a phone call when the phone is plugged into the travel
adaptor. The adaptor will continue to charge the battery even when you
are making the call.
Note: The battery charges faster when the phone is turned off.
Low battery indicator
You can tell whether or not your battery needs to be recharged by checking the
battery indicator (this icon
is located in the upper-right corner of the
display screen). The presence of all three bars indicate a full charge. No bars
(the battery icon is empty) means your battery must be charged.
24
The empty battery icon
Two to three minutes before the battery charge level gets too low to operate the
phone, the battery sensor will let you know by blinking an empty battery icon
(
), and sounding a tone. If you continue to operate the phone without
charging the battery, the phone will automatically turn off. If this happens, your
wireless call will be terminated. However, if you plug into a charging device,
you can continue your call. Be sure to monitor the battery strength icon and
make certain your battery is adequately charged.
Your phone’s modes
Answer mode
With this option activated, you can select how you want to answer your phone
when you receive an incoming call.
Input mode
Use input mode to enter text, numbers and symbols into various screens.
Lock mode
When you lock your phone using the Lock Mode menu option, you restrict
phone usage. You can receive messages and calls, but you cannot make an
outgoing call until your phone is unlocked. You can unlock your phone, by
following the prompts and entering the lock code.
Power save mode
Your phone comes with a power save feature that automatically activates if your
phone is unable to find a signal after 15 minutes of searching. While this
feature is active, the phone’s battery charge is conserved. The phone
automatically rechecks periodically for a signal. To manually force the phone
to recheck for a signal, press any key. A message on the display screen will
inform you when your phone is operating in the power save mode.
25
Silent mode
The Silent Mode feature allows you to instantaneously silence the ringer when
in standby mode.
•With the phone in standby mode, press and hold
for 2
seconds. Entering Silent Mode displays briefly. (The silent mode
icon displays on the standby screen.)
•To exit from Silent Mode press and hold
for 2 seconds. The
screen prompt Exit Silent Mode displays, and your phone
automatically reactivates the previous ringer volume setting. (The
silent mode icon is removed from the standby screen.)
Standby mode
Standby mode is the fundamental state of your phone once your phone has
found service.
Your phone goes into standby mode:
1. After you power it on.
2. When you press
after a call, if your phone is on.
When in standby mode, you will see:
1. The month/date, and time.
2.
While in standby mode:
•Enter a phone number, and press
•Press to view and and dial Recent calls
at any time to return to standby mode, but be careful; if you are on
All other active icons.
to make a call
Press
a call when you press
your call.
, you will return to standby mode and disconnect
Messages can also be received when in standby mode, the alert tone will sound
when a new message is received. The menu is accessed when you are in
standby mode by pressing
.
26
Talk mode
You can place and answer calls only when your phone is turned on. When you
are on a call your phone is in Talk mode. Pressing will display a list of the
In-Use menu options.
Vibrate mode
In standby mode:
1. Press the down arrow located on the left side of your phone to adjust the
ringer volume
.
2. The vibrate icon
To change the setting:
appears on the display.
1. Press the down arrow located on the left side of your phone to adjust the
ringer volume.
2. Your options are: Silent, 1 beep, Vibrate, Vib+Ring, Level 1, Level
2, Level 3, Level 4, and Level 5.
3. The vibrate icon no longer appears on the display screen.
Getting Started
Getting service
You must contact your service provider and follow their instructions for
obtaining service for your phone. We suggest that you read this user guide to
fully understand the services that your phone supports.
27
Turning your phone on
To turn your phone on:
1. Fully extend the antenna for the clearest reception.
2. Press and hold
for more than two seconds.
Note: Your phone has a built-in antenna. As with any other radio-transmitting
device, do not touch the antenna as it affects call quality and can cause the
phone to operate at a higher power level than is necessary.
3. The LED indicator lights and a power-up alert sounds. The name of your
service provider momentarily appears on the display screen.
4. The phone begins searching for a network signal. When a signal is found,
the date, day, and time appears.
5. Your phone is now ready to place and receive calls.
If the phone is outside of your carrier’s coverage or roaming area the icon
displays. If this happens you cannot place or receive calls. You must try later
when service becomes available.
Turning your phone off
To turn your phone off:
1. Press and hold
for more than two seconds.
2. The display screen and the backlight go off.
Note: If your phone is on, and
is pressed for less than one second, the
phone will not power off. This feature prevents your phone from being
turned off accidentally.
28
Several ways to answer a call
When you receive a call:
•
•
If the caller can be identified, the phone displays “Call from caller’s
phone number, (or name if pre-stored in your Phone Book)”.
If the caller cannot be identified, the phone displays “Call from
Unavailable No”.
There are several ways to answer an incoming call.
• Press
•Press any key
•Open folder
•Voice answer
•Set the Auto Answer feature
List of main and sub menus
This list displays the Main menu structure and Message features. It shows the
individual sub menus and features assigned to each Main menu option.
1:Calls
1:Outgoing
2:Incoming
3:Missed
4:Erase Logs
1:Outgoing
2:Incoming
3:Missed
4:All Calls
5:Call Timer
1:Last Call
2:Total
3:LifeTime
4:Erase Total
2:Phone Book
1:Find
2:Add
3:Rename Group
1:Friend
2:Family
3:Colleague
4:VIP
5:No Name
4:My Phone#
29
5:Memory
3:Message
1:Send New Msg
2:Voice
3:Inbox
4:Outbox
5:Draft Msg
6:Saved Msg
7Web Alert
8:Msg Setting
1:New Message
1:Save In Outbox
2:Callback #
3:Entry Mode
4:Delivery Ack
5:My Signature
2:Msg. Alert
1:Volume/Vibrate
2:Type
1:Voice Mail
2:Page
3:Text
4:Web Alert
3:Reminder
3:Scroll Timer
4:Auto Delete
5:Canned Msg.
6:Voice Mail #
9:Erase Msg
1:Voice
2:OldInbox
3:NewInbox
4:Outbox
5:Draft Msg
6:Saved Msg
7:All Messages
4:Mobile Web
5:Planner
1:Get In Web
2:Prompt
1:Today
2:Scheduler
3:Jump To Date
4:To Do List
5:Memo Pad
6:Count Down
7:Alarm Clock
8:World Time
9:Calculator
6:Display
1:Animation
1:Opening
2:Closing
3:Wall Paper
4:Front Display
30
2:Banner
3:Backlight
4:Contrast
1:Main Display
2:Front Display
5:Auto Hyphen
7:Sounds
1:Volume/Vibrate
1:Calls
2:Alarm
2:Ringer Type
1:Calls
2:Alarm
3:Data/Fax In
4:Planner
3:Key Beep
1:Volume
2:Tone Length
4:Alerts
1:Minute Beep
2:Service
3:Connect
4:Disconnect
5:Fade
6:Roam
7:Privacy
5:Power On/Off
6:Roam Ringer
7:Whisper Mode
8:Voice Kit
1:Voice Dial
1:Record
2:Review
3:Erase All
4:Set Active
2:Voice Memo
1:Record
2:Review
3:Erase All
3:Call Screen
1:On/Off
2:Inbox
3:Greeting
1:Record
2:Play
3:Select
4:Call sound
5:Wait Time
9:Setup
1:Location
2:Network
1:Set NAM
2:Roam Option
3:Data/Fax
1:Auto Detect
31
2:Baud Rate
4:Security
1:Lock Phone
2:Change Lock
3:Emergency #
4:Voice Privacy
5:Restriction
1:Outgoing
2:Incoming
3:Phone Book
6:Erase Memory
7:Reset Phone
5:Call Answer
6:Auto Answer
7:Auto Retry
8:Language
9:Clock Set
1:Main Clock
2:Dual Clock
0:Version
In-Use Menu (Can be opened only when on a call)
1:Mute/Unmute
2:Calls
3:Phone Book
1:Find
2:Add
3:Rename Group
4:My Phone#
5:Memory
4:Silent/Quit
5:Send Tel #
6:My Phone #
7:Version
8:Voice Privacy
9:Location
0:Send DTMF
Accessing menus using the navigation key
The menus and submenus can be accessed by using the navigation key or using
shortcuts.
Menu options are numbered but can also be accessed by using the
navigation key:
•
•
•
Press right to activate Wireless Web.
Press down to activate Voice Memo.
Press left to activate the Scheduler.
32
•
Press up to search your Phone Book by name.
Returning to the previous menu
When using the navigation key you can return to the previous menu at anytime.
To do this:
•
•
Press
Press
to return to the previous menu.
to exit the menu without saving the setting.
Accessing menus using shortcut numbers
All main menus, menu levels, and menu content items are assigned numbers.
All menus and their contents can be accessed using these “Shortcut” numbers.
The following steps are a sample exercise to access your planner:
1. In standby mode, press to access the Main menu.
2. Press
3. Press
4. Press
for Planner.
for Today.
to see the event list or nothing stored.
Calls
Outgoing
To place a call press
to power on your phone. The phone first shows an
animated sequence and the icons discussed earlier display, this indicates your
phone is on. (No dial tone will be heard). This is called standby mode.
1. Enter the phone number you want to call (up to 32 digits), by pressing
the numeric keys. The phone numbers display from left to right.
2. Press
to place a call to the entered phone number.
33
Incoming
Your phone signals an incoming call or message in the following
ways:
•An animation message
•The backlight illuminates
•The red LED indicator flashes
•The ringer sounds (unless you have set the ringer to vibrate or off)
Incoming call notification continues until one of the following events
occurs:
•You answer the call
•The calling party ends the call
•The call is sent to voicemail
Your phone provides the following voice call notification features:
•Nine ring volume settings including 1- beep, vibrate, vib+ring, or
silent.
•Five ring types and Ten melody tones
•Name display with Caller ID. (If the caller’s name is programmed
into your Phone Book.)
•Automatic storage of an incoming call’s information to a call log.
(The last 20 calls you answered are stored in an Incoming call log
list and the last 20 calls you missed are stored in a Missed call log
list)
Missed
Your phone keeps a list of calls that you did not answer when the phone was
active and service available. The phone indicates a missed call by displaying a
text notification on the screen. Additionally, if caller information is available, a
Missed call entry is created, and the screen displays the phone number of the
most recent missed call.
Your phone has several convenient options for when you miss a call:
•Press
to call the displayed number.
34
•Press
to clear the Missed Call message from the display.
•View your Missed calls log.
Erase log
You can erase any one of the call directories (Outgoing, Incoming or Missed),
or you can erase all three directories.
To erase all directories:
1. In standby mode, press to display the Main menu.
2. Press
3. Press
for the Calls menu.
for Erase Log. The available options are:
•Outgoing
•Incoming
•Missed
•All Calls
4. Press highlight All Calls.
5. Press
6. Press
to erase all your call directories.
to cancel the action and return to the previous menu.
Reviewing calls
When a call log is displayed, press the number associated with the call log to
be connected.
1. In standby mode, press to display the Main menu.
2. Press
for Calls.
3. Press the number associated with the call log to select an option:
•Press
•Press
•Press
•Press
•Press
for Outgoing calls.
for Incoming calls.
for Missed calls.
for Erase Logs.
for Call Timer.
35
4. When the call log option displays, press to locate the call information
you require. If there is a Phone Book match, the name displays. If there
is no Phone Book match, only the phone number will display.
5. When your selection is highlighted you can:
•Press
to be connected to that party.
•Press to review all the available call information (name and
phone number [if available] and time/date stamp.)
•Press for more options.
6. Press
to exit, and return to the previous screen.
Keeping track of call activity
Your phone saves a record of calling activity that permits you to easily return
calls.
Your phone retains the following call directories in memory:
•Outgoing: The last 20 calls placed from your phone.
•Incoming: The last 20 calls placed to your phone.
•Missed: The last 20 calls placed to your phone that you did not
answer.
•Erase Logs: The last 20 calls you chose to erase from your call
log.
•Call Timer: The talk time spent on your calls.
Call timer
Your phone records (or logs), the amount of air time or talk time used for all
calls.
To view Call Timer from standby mode:
1. In standby mode, press to display the Main menu.
2. Press
3. Press
for Calls.
for Call Timer.
4. Press to highlight an option. The available options are:
36
•Last Call
•Total
•LifeTime
•Erase Total
5. Press
to open an option, or press
to cancel, and return to the
previous screen.
Last call
Last call allows you to review the amount of time spent on the last call you
made.
1. In standby mode, press to display the Main menu.
2. Press
3. Press
4. Press
for Calls.
for Call Timer.
for Last Call. The amount of time spent on your last call
displays.
5. Press
to return to the previous display screen.
Total
Total air time is the cumulative amount of time the phone has been used since
the total air time was last erased. Air time for all incoming and outgoing calls is
saved here. This feature is not intended for billing purposes.
1. In standby mode, press to display the Main menu.
2. Press
3. Press
4. Press
for Calls.
for Call Timer.
for Total.
The screen displays the total number of calls, and the total air time for calls
made and received since you last set the Total air time to zero (by using the
Erase Total option.)
37
5. Press
to return to the previous display screen.
LifeTime
LifeTime air time is the amount of time the phone has been used since it was
first activated. Air time for all incoming and outgoing calls is saved here. This
feature is not intended for billing purposes.
Note: You cannot erase any information created by this option.
1. In standby mode, press to display the Main menu.
2. Press
3. Press
4. Press
for Calls.
for Call Timer.
for LifeTime.
The screen displays the total number of calls made from this phone, and the
total amount of air time used since this phone was set-up. This information
cannot be erased.
5. Press
to return to the previous display screen.
Erase total
If you choose the Erase Total option, the counter for all air times with the
exception of LifeTime, will be set to zero. The counter will begin counting the
next time you make or receive a call.
To erase your total air time:
1. In standby mode, press to display the Main menu.
2. Press
3. Press
4. Press
for Calls.
for Call Timer.
for Erase Total.
5. Press to highlight Yes or No.
38
6. With Yes highlighted, press
previous display, or press
previous display screen.
to erase the total airtime and return to
to cancel the operation and return to the
Call waiting
Your phone beeps when another call is coming in.
To answer this call:
1. Press
to call back later.
2. Press and they will be placed on hold.
. When connected, ask them to remain on the line or, request
You are now connected to your original call. You can press
between calls.
to alternate
Caller I.D.
This feature allows you to see who is calling you by displaying the callers
number when the phone rings. If the callers name and number are stored in
the phone book, the name also displays. You can also block your number from
being displayed on another phone by enabling the call block feature.
To activate call block:
1. Press
.
2. Enter the phone number and press
.
Note: To block your number permanently, contact your service provider.
39
Three way calling
To place a three way call:
1. Call the first party, and press
. When connected, ask them to remain
on the line, press
and they will be placed on hold.
2. Call the second phone number, and press
.
3. When the second party answers, press
connected.
and all parties will be
Note: You may need to contact your service carrier to set up Call waiting,
Caller I.D., and Three way calling.
Phone Book
Your phone permits you to store up to 999 numbers and names in the Phone
Book. Each entry can have up to 7 associated phone numbers and one e-mail
address. Each entry can contain up to 32 digits including hard pauses, with an
associated name of up to 12 characters. (Name entry is optional). You can
specify the memory location of your choice for each entry. Memory locations
can be marked Secret preventing unauthorized viewing.
Note: You cannot store numbers in locations 311, 411, 611, or 911 of your
Phone Book.
One-Touch, Two-Touch, and Three-Touch Dialing from your Phone Book
makes it easy to call a phone number stored in your Phone Book.
To access your Phone Book:
1. Press for the Main menu.
2. Press
for Phone Book.
Use the instructions given in the following subsections to manipulate your
Phone Book.
40
Find by name
This option allows you to find a stored name (alphabetically) in the Phone
Book and place a call to that name.
1. In standby mode, press to display the Main menu.
2. Press
3. Press
for Phone Book.
for Find.
4. Press to highlight By name.
5. Press to select the name. The display screen shows the phone
number and E-mail address (if available) associated with the name.
6. Press
to place the call.
7. Pressing
returns you to the previous screen.
Find by entry
This option allows you to find a stored entry by location number.
1. In standby mode, press to display the Main menu.
2. Press
3. Press
for the Phone Book.
for Find.
4. Press to highlight by Entry.
5. Press
to select the entry. The entry information is displayed.
6. Press to highlight the phone number.
7. Press
to call the number.
41
Find by group
This option allows you to find a stored entry in a related group.
1. In standby mode, press to display the Main menu.
2. Press
3. Press
for the Phone Book.
for Find.
4. Press to highlight by Group.
5. Press
to select the entry. The entry information is displayed.
6. Press to highlight the phone number.
7. Press
to call the number.
Renaming a group
Use this option to rename or edit a group in your phone book.
1. In standby mode, press to display the Main menu.
2. Press
3. Press
for the Phone Book.
for Rename Group.
4. Press up or down to locate the group you are renaming.
5. Press
6. Press to select T9 word, ABC, Symbol or 123.
7. Press to erase the old group name.
8. Use the keypad to enter new group name.
.
9. Press
.
42
Add
This menu allows you to add information to your Phone Book.
With the phone in standby mode:
1. Press for the Main menu.
2. Press
3. Press
for Phone Book.
for Add. The Phone Book display screen prompts you to
confirm Number or E-mail.
4. Press
. Enter the phone number or e-mail address. For pause
options press
.
5. Press
to save in New Entry.
6. Press to highlight one of the following fields:
•Home
•Office
•Mobile
•Pager
•Fax
7. Using the keypad, enter the name that is associated with the number.
Note: This step is optional
8. Press
to save the entry.
Editing phone book numbers
Once stored in the Phone Book, an entry can be changed quite easily.
To change a Phone Book entry:
1. In standby mode, press to display the Main menu.
2. Press
3. Press
for Phone Book.
for Find.
4. Press to highlight the entry requiring editing.
43
5. Press
. The existing phone number is highlighted.
6. Press and to highlight the Edit option.
7. Press
8. Press
. The Phone Book (option) screen displays.
to save your changes.
Note: Press
until the existing number is deleted. Enter the new number.
(You can enter up to 32 digits.)
Overwriting existing name and number information
You can overwrite existing information using separate actions in both the name
and number fields. Follow these instructions:
1. At the Phone Book (options) screen, press to highlight an existing
name or number field. When highlighted, press and to highlight
the Edit option.
2. Press
3. To overwrite, press
4. Enter the new information.
.
, until you clear the existing name or number.
5. Press
again to save your entry.
Adding pauses
When you call automated systems (like banking services), you are often
required to enter a password or account number. Instead of manually entering
the numbers each time, you can store the numbers in your Phone Book
separated by special characters called pauses.
•P pause: A hard pause stops the calling sequence.
•T pause: A 2 second pause stops the calling sequence for 2
seconds and then automatically sends the remaining digits.
Note: Multiple 2 second pauses can be entered to extend the length of a
pause. For example, 2 consecutive 2 second pauses cause a total pause time
44
of 4 seconds. However, keep in mind that pauses count as digits towards the
32 digit calling maximum.
Storing pauses in a phone book entry
To store a number in your Phone Book that contains pauses:
1. Enter the phone number you want to store (such as the bank’s teleservice
phone number).
2. Press . The pause menu options display.
3. Press
4. Press
to highlight one of the three pause menu options offered.
to select an option.
5. When the number and pauses are complete, press
to store the
number in your Phone Book.
Pause dialing from a stored entry
To pause dial from the Phone Book:
1. If you stored the number using (2 second) T pause(s), simply call the
number from the Phone Book.
2. If you stored the number using (hard) P pause(s), call the number from
the Phone Book and wait for the appropriate prompt from the number
you are calling (credit card number, bank account number, etc.).
3. Press
to call the number.
Manual pause calling
To manually call a number with pause(s) without storing to the
Phone Book:
1. Enter the phone number of the service you want to call (such as a bank’s
teleservice phone number). Begin by entering the number 1.
45
2. Press to display the pause Menu options. Press to locate the
pause option of choice and press to activate. Continue in this manner
until you enter the complete number with pause(s).
3. Press
to call the number.
Note: Storing pauses is convenient if you plan to call the number frequently.
Erasing individual phone book entries
To erase an existing entry from either the Find by Name or Find by Entry
option.
1. In standby mode, press to display the Main menu.
2. Press
3. Press
for Phone Book.
for Find.
4. Press to highlight the information and press
5. Press to display the following menu options:
.
• Talk
•Edit
•Erase
6. Press to highlight the Erase option.
7. Press
. The phone prompts Yes or No.
8. Press to highlight your option.
9. Press
press
to confirm (Yes) and erase the Phone Book entry, or
to cancel (No) the Erase command.
Erasing your phone book
You can erase all the numbers stored in your Phone Book. This is useful if you
want to give your phone to a friend or family member, or if you need to erase
all of your phone numbers.
1. In standby mode, press to display the Main menu.
46
2. Press
3. Press
for Security. Enter your current 4-digit lock code.
for Erase Memory. A confirmation message displays asking
if you still want to Erase.
4. Select Yes and press
press to cancel the operation. Erasing Phone Book and Voice
to erase the Phone Book entirely, or
Dial displays. The phone then returns to standby mode.
Editing an existing e-mail address
To edit an existing e-mail address:
1. In standby mode, press
to display the Main menu.
2. Press
for Phone Book.
for Find. The Phone Book displays.
3. Press
4. Press to highlight the entry and press
.
5. Press
, and select the Edit option. The Phone Book (options)
screen displays. Edit the existing E-mail address.
6. Press
to save.
Setting speed dial
For each name entered in the Phone Book, the option of designating a Speed
Dial number is available.
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Phone Book.
for the Find.
4. Press to highlight your entry.
5. Press
6. Press
to display that entry’s phone number.
for options.
7. Press to highlight the Edit option.
47
8. Press
9. Use the keypad to enter the associated Speed dial number.
10. Press to continue, following the prompts, or press
and return to the previous screen.
. The Phone Book (options) screen displays.
to cancel
Storing incoming phone numbers at the end of a
call
To store a phone number after ending a call:
Note: If the call was incoming, and Caller ID information was unavailable,
then the store option will also be unavailable.
1. Once you press
to end your call, the screen displays the call time
(length of call), phone number, and name of the party (if available).
2. Press
.
3. Follow the prompts to save the number.
Storing phone numbers from call logs
To store a phone number from the call logs:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Calls.
for Outgoing,
for Incoming, or
for Missed calls.
4. Highlight the number you want stored in the Phone Book and press
.
5. Press for menu options, navigate to highlight Save.
6. Press
to store the phone number to the Phone Book.
48
Shortcuts to storing phone numbers
You can store a phone number by entering the number, and pressing
.
Follow the screen prompts to designate other information. You can also save a
number after an incoming or outgoing call.
One-touch dialing
Memory locations 001 through 009 are special One-Touch locations. You can
call the phone numbers stored in the Phone Book memory from 001 through
009 by pressing one key. For example, for location number 001. Press and
hold
until the name and number are displayed and called.
Two-touch dialing
Memory locations 010 through 099 are special Two-Touch locations. For
example, for location number 013, press
and hold down
until the
name and number are displayed and called. To dial the number 100, Three
Touch dialing is required.
Three-touch dialing
Memory locations 100 through 999 are three-Touch locations. For example,
for location number 113, press
and hold
until the name and
number are displayed and called. To dial the number 100, Three Touch dialing
is required.
Shortcuts to memory dialing
Speed Dialing:
1. From standby mode, enter the entry’s Speed Dial number.
2. You must press and hold the last digit of your speed dial number
for your call to go through.
Navigating to the number:
49
1. From standby mode, press
for Main menu.
2. Press
3. Press
for Phone Book.
for Find.
4. Use the navigation key to highlight the entry.
5. Press to call that entry’s Speed Dial number.
My phone #
To display your phone’s number:
1. In standby mode, press to display the Main menu.
2. Press
3. Press
for the Phone Book.
for My Phone #. The phone’s number displays.
4. You can press
to return to the previous menu at any time.
Memory
This features saves voice and dial calls in memory. You can save up to 999
automatic dial in your Phone Book and up to 20 in Voice Dial.
Messages
Your phone comes equipped with several ways to send and receive messages.
Mobile originating SMS text messaging
Note: Check with your service provider to confirm availability of this service.
Your phone is able to send and receive text messages. When a message is
received, your phone will sound an alert tone (unless turned off) and a new
message pop-up window displays on the screen.
Note: This memory is shared between all messages. You can store 50
incoming, 50 outgoing. The number of messages that can be stored is
dependent upon the length of the messages. Messages that you send can
contain a total of 160 characters.
50
Creating SMS text messages
1. In standby mode, press
(press
when in-use) to display
Message.
2. Press
for Send New Msg. The screen displays Send To:.
3. Press to select from options. (Phone Book, T9 Word, ABC,
Symbol, 123, edu, net, com, and Save Address).
4. Press to highlight an option.
5. Press
6. Enter the message using the keypad and selected method of entry.
7. When finished, press . The phone will send you a delivery
.
acknowledgement about 20 seconds after delivery.
To continue, select from the following two menus:
8. Pressing
opens the Options menu. Select from the following:
•
Priority: Allows you to assign a priority to your messages.
•Urgent
•Normal
•
Validity: Allows you to select the period of time you want the message to
be available to the recipient.
•None
•30 min.
•1 hour
•2 hours
•12 hours
•1 day
•2 days
•3 days
51
Entering text, numbers, and/or symbols
At various times when using your phone, you will need to enter text in the
display screen. Some examples would be: adding an E-mail address, storing a
name in the Phone Book, entering events in the Scheduler, or inputting text
messages. If you want to enter text on the display screen.
1. When you are entering events, numbers, or text in your phone
select to view the menu options:
•T9 Word
•ABC
•Symbol
•123
•Canned Msg
2. After you are in the correct menu, use the navigation key to highlight your
option, then press
to save. Enter your information. You can:
•
•
Press
Press
to insert a space.
to clear the last number, letter, or symbol, or
Press and hold
To change the input mode again:
1. Press to view the options.
2. Press to highlight your choice.
3. Press to save.
to completely clear the input field.
•
•
ABC: This is the text entry mode.
T9 Word: This is the predictive word entry mode. You can quickly and
easily enter frequently used words.
•
Symbol: Symbol entry is used with numeric keys and associated
symbols.
•
123: This is the number entry mode.
52
•
Canned Msg: These are messages you can send that are already in your
phone.
Alphabetical text entry
Alphabetical text entry characters may be entered in ABC mode, by pressing the
corresponding key to the letter you want to enter.
Press the same key repeatedly to change between the characters represented
by each key. To change capitalization formats while entering text, press
.
Entering numbers
Numeric mode enables you to enter numbers into a text message.
Symbol entry
Symbol mode enables you to enter symbols into a text message. Use
to
display the options, then press the navigation key up/down to select the symbol
option. When displayed, use the navigation key to manipulate the symbols.
When in Symbol input mode, press the key shown on the display under the
required symbol.
53
T9® word text entry
T9 Word, or T9 for text on 9 keys, requires only one key press per letter, and
recognizes the most commonly used word of a numeric sequence.
For example, to enter the word hello, you can spell out the word by pressing
only five keys, 4-3-5-5-6. T9 Text Input recognizes the most commonly used
word for that numeric sequence is hello. If two or more words share the same
numeric sequence, T9 provides the most commonly used word, with the ability
to navigate to the next most commonly used word by pressing
.
Press repeatedly to display all of the available words that T9 knows.
When the word you need displays, continue to enter text in the same way, or
change to another text or character entry mode.
Note: To type words not found in the T9 mode, change the text input mode to
ABC mode. You can include numbers between letters without exiting the T9
input mode by pressing and holding the desired numeric key.
New messages
You can create text or e-mail messages to send to another party. Each message
can be sent to up to 10 numbers or E-mail addresses at a time. Message
options allow you to set a priority, validate a time period, or send a message
after a specified time. You can also file draft messages yet to be sent, into a
folder, or save sent messages to the Outbox to review their delivery status.
Note: Sending messages is only supported in digital networks. This feature
will only be available if your service provider’s network supports it.
Note: Once you begin entering data, the number of characters available will
be displayed on the screen.
1. In standby mode, press
(press
when in-use) to display
Message.
2. Press
for Send New Msg.
3. The screen displays Send To:
54
4. Pressing
permits selection from the options: Phone Book, T9
Word, ABC, Symbol, com, edu, net, Save Address, and 123.
5. After finding and entering the Send To: information, press
to go to
the Message menu.
6. Enter your message data, (press
to select your text entry mode),
when finished, press
to return to the Send New Msg menu.
7. If the same message is to be sent to multiple recipients, press
to go
to the Send To menu.
8. Press
9. Press
and enter the number you want to send.
when finished.
10. To add additional recipient addresses, repeat the above steps. The
multiple destinations entered will be updated on the Send To screen.
11. Press at any time to despatch the information.
Inbox
Your phone can store text messages in your inbox.
To view your messages:
1. In standby mode, press
(press
when in-use).
2. Press
3. Use
to open the Inbox
to highlight the message you want to view.
. The phone displays the message contents.
4. Press
5. While viewing your message press
to access the following options:
•Forward
•Delete
•Save Text
•Save addr
•To Saved Msg.
55
Outbox
Your phone stores messages in Outbox, regardless of whether the message was
successfully transmitted. If Do Not Save was not set in the Save Message setting
under Msg Setup, you can review, resend, or delete any message stored in the
Outbox. You can also verify if a message or E-Mail was successfully transmitted,
and at what date and time by opening the Delivery Acknowledgement feature.
Reviewing outbox
To review outgoing messages:
1. In standby mode, press
(press
when in-use) to display
the Message menu.
2. Press
for Outbox. A list of messages displays.
3. Using the , highlight the message you want to review and press
to select it.
4. Press
for further options. A Sent Msg menu will display.
•
Select Re-send to resend the message, press
to resend with the
same message settings.
•
•
•
Select Save Msg to save your message.
Select Cancel to cancel your message.
Select Delete to delete the message from Outbox.
Message memory capacity
Your phone can store up to 130 messages (Inbox 50, Outbox 50 Draft msg 15,
Saved msg 15). The storage capacity includes all received, sent, filed message
types, VMN (Voicemail Notification), and text messages. The number of
messages stored, depends upon the length of each message. When message
memory reaches over 75% capacity, the screen displays a text notification. At
100% capacity, the screen displays a text notification and rejects additional
56
incoming messages until you erase the stored messages from Inbox, Outbox or
Filed Msg.
Messages and lock mode
Incoming messages are received even when your phone is in Lock Mode. The
screen will display the time and date of the message but you cannot access the
message. To access the message, unlock the phone to proceed.
Draft message
Your phone can store draft messages that are yet to be sent in the Draft Msg
folder. You can access this folder at a later time to edit and send the message.
To view messages:
1. In standby mode, press
(press
when in-use) to display
the Message menu.
2. Press
3. Press
for Draft Msg.
to view messages.
To access unsent messages and continue editing:
1. In standby mode, press
(press
when in-use) to display
the Message menu.
2. Press
for Draft Msg. The number of pending messages display next
to the Draft Msg text. The filed messages will display in order.
3. Press
4. Press
to highlight the message, and press
for the options.
to open.
5. Use the navigation key to highlight Edit or Delete.
6. Press
to view and select from the available options.
7. Enter the Send To: information and press
. The Message screen
displays.
57
8. Press
for edit text.
9. Enter a message, when finished press
displays.
, the New Messages screen
10. Press
for Save in Draft.
Web Alert
Your phone alerts you with incoming browser messages. When a new message
arrives, your phone will display a text notification together with an audible
alert.
You can access Web Alert from the Message menu:
1. In standby mode, press
(press
when in-use) to display
the Message menu.
2. Press
3. Press
for Web Alert.
to complete the action.
Note: Contact your service provider for availability.
Erase message
1. In standby mode, press
(press
when in-use) to display
the Message menu.
2. Press
for Erase Msg.
3. Press to highlight an option.
4. Press
to complete the action.
58
Message setting
1. In standby mode, press
the Message menu.
(press
when in-use) to display
2. Press
for Message setting.
You can preset a number of options for general settings or new messages. The
message indicator is displayed and remains on the screen until you listen to the
new voicemail message, read the New BrowserMsg or Text Msg.
Scroll timer
Scroll Timer allows you to select the amount of time you would like your scroll
to be available before closing.
Msg. reminder
Message Reminder allows you to select the number of times you would like to
be reminded that you have a message.
Voice mail #
Voice Mail # allows you to input numbers for Voice Mail.
New message
Offers a number of options. Each option offers different features.
Callback #
Press
to automatically call the number displayed on the screen.
Delivery ack.
Confirms delivery of your message.
My Signatures
Allows you to apply your signature to outgoing messages.
59
Save in outbox
You are offered three options. Press
Prompt - saves the message.
Not Save - does not save the message.
to save the setting.
Auto Save - automatically saves the created message to the Outbox after the
message is transmitted.
Entry Mode
You can navigate between Alphabet and T9 Word (predictive keypad) for the
default setting. Press
to save the setting.
Auto delete
This option allows you to have your message automatically deleted after
viewing it. Or, you can choose to be warned before your message is deleted.
Canned Msg.
Canned messages are pre-programmed into your phone. You can select the
number that is associated with each canned message, and press
to edit.
Once you are done editing your canned message, press
to save.
Msg alert
While setting up your messages you can adjust the message volume. To do this
press
for Message setting. Press
for Msg alert. Your
options are:
•Volume/Vibrate
•Type
•Reminder
Use the Navigation key to highlight your volume level, and press
to save.
60
Receiving a message in standby mode
When your phone receives incoming messages in standby mode, the ringer
sounds, (unless it is turned off), and the screen displays: New Voicemail,
New Text, New Page or New BrowserMsg. The message icon is displayed,
and remains on display until you listen to, or read, the new message.
Receiving a message while on a call
When you receive a message while you are on a call, the Send New Msg
screen displays two options: Ignore and View. The closed envelope icon
is displayed.
You can easily review the new message while on the call by just pressing
Your call will not be disconnected, and you can ask the other party to wait
while you review the message. If you want to ignore the message, just select
that option and continue with your call.
.
Reviewing voice mails and text messages
When a message arrives, you can recall the sender’s call back number if it is
available, by pressing
. To review the message, press
. The Inbox
Msg list provides options for reviewing the sender’s name, number, date and
time information, and the message.
Reviewing stored voicemail and
text messages in standby mode
1. In standby mode, press
, to display the Message menu. The number
of received or sent messages displays next to the associated message type
in the menu.
2. Press
for Voice. The date and time for the last voice mail message
received display with a notification of the number of new voice mail
messages.
61
•You can press
mails.
•You can press
to call your mail box directly to review voice
for the Inbox.
3. Use the to highlight the message you want to review, press
to
open it.
•While reviewing the message, you can press to locate message
information such as: date and time, sender’s call back number,
senders number, e-Mail address, and message. However, if you wait
a few seconds the phone will automatically scroll through the
display.
•To review other messages, press to the right to review the next
message, or to the left to review the previous message.
4. Pressing
returns you to the previous screen.
Note: Press
for further options when reviewing a message. When in
standby mode, press and hold
to automatically dial voice mail.
Message options
When reviewing Messages, the menu provides a number of options. You can
return a call or text message to the phone number, or e-mail address in that
message, or you can forward the message to another.
1. In standby mode, press
(press
when in-use) to display
the Message menu. A number of received or sent messages displays next
to the associated message type in the menu.
2. For Text messages press to locate the message you want to review,
press
to open.
3. Press
to view the following options:
•Forward: to forward the message to another. The phone accesses
the New Message menu, and copies the sender’s message (body) to
the Message field.
•Delete: to delete the message from the Inbox.
•Save text: to save text and send at a later date.
62
•To saved Msg: to save your message.
•Save addr: to save the sender’s e-mail address to the Phone Book.
The address is automatically copied into the Add Entry or E-mail
Entry field.
4. Pressing
Ringer type — message
To activate, view or change the ringer type for messages:
1. In standby mode, press to display the Main menu.
returns you to the previous Inbox messages list screen.
2. Press
3. Press
4. Press
for Message.
for Msg Setting.
for Msg Alert.
5. Make your selection from the following options:
•Volume/Vibrate
•Type
•Reminder
6. Press
to highlight your option.
7. Use the to hear tones. Each tone plays as you navigate through the
options.
8. When the desired ringer type plays, press
to save the setting.
Note: You can press
to return to the previous menu at any time.
63
Mobile web
Your phone comes equipped with Wireless Web Internet access through a
MiniBrowser. The MiniBrowser displays immediate information through your
phone. You can view specially designed versions of popular sites which include
sports, weather, news, stock quotes, etc. Browsing the Web through your
phone is not the same as using your PC since site providers have only selected
certain aspects of the available sites to present to the wireless phone users and
have removed most graphics.
Each time you launch the MiniBrowser, the phone will connect to the Internet
and the service indicator icon will display. Any time the service indicator icon is
visible on the display, you are connected to the Internet and will be invoiced
accordingly. Rates and pricing vary according to your service option. For
further information contact your service provider.
The MiniBrowser will end an Internet connection after a certain period of
inactivity, however some information from your session remains stored in the
phone, and (if you leave your phone turned on) you can access this
information without reconnecting to the Internet. If you are viewing this stored
information, and you select a link to a site that was not accessed in your last
session, then you will automatically be re-connected to the Internet.
Launching the minibrowser
The first time you use the MiniBrowser, you will be prompted to go through a
security setup process that takes approximately three to five minutes.When the
security key is initially sent to the carrier, a unique value is created. If the
phone is reset for any reason, you must contact the carrier to reset the security
key. The original key is no longer valid and will not allow the MiniBrowser to
operate.
64
To launch the MiniBrowser.
1. In standby mode, press , or
.
2. Press
for Get in Web.
3. Press the left soft key image. Your phone will begin its search to launch
the MiniBrowser.
4. Once connected, the Home Page (or the last page visited), will be
displayed. Press and hold
to access the MiniBrowser. An example of
a Home Page is shown below:
WEB HOME PAGE
1. Financial
2. Traffic
3. Travel
4. Weather
5. Sports
6. Entertainment
7. Games
8. Shopping
9. Portals
Note: What appears in the display window is dependent upon the service
provider content. To view additional text, press
.
Exiting the web/minibrowser
Press
If the Prompt to end or Prompt both option is selected in the MiniBrowser
press , a prompt asking if you want to end the
MiniBrowser call is displayed.
to exit the Web.
65
The minibrowser start and end prompts
Your phone can be set to view a prompt each time you start or end a
MiniBrowser session. You have the option to change this default prompt
setting. The default setting may differ as it is based upon the carrier’s
requirement.
To change the settings:
1. In standby mode, press or press
2. Press for Prompt.
for Mobile Web.
3. Press to highlight your option:
•None: This prompt is never displayed.
•To Start: You will see this prompt when you enter the browser, but
not when you exit it.
•To End: You will see this prompt only when you exit the browser.
•Both: You will be prompted when you enter or exit the browser.
4. Press
to save your setting or press
to cancel.
The minibrowser soft keys
At the bottom of the MiniBrowser display is a solid bar which contains the
browser commands. The “soft” keys (
) appear below
the solid bar and are used to execute the commands. These two keys are called
“soft” keys because their function changes depending on where you are in the
MiniBrowser software.
66
Navigating the web
When you use the MiniBrowser, some of the keys on your keypad will operate
differently than during a normal phone call.
The MiniBrowser presents on-screen items in any of the following ways:
•Text or numeric input
•Links (embedded in content)
•Numbered options (some options may not be numbered)
•Simple text
You can act on the options or links by using the soft keys.
How the minibrowser keys work
Navigation key: Use this key to find and select
all of your options.
CLR: This key performs two functions:
•
It is used as a browser back-up key.
Pressing it once backs you up one page.
Pressing and holding it down backs you up
to the carrier’s Home Page.
•
It also clears entered text or numbers.
When entering numbers or text, press it to
clear the last number, letter, or symbol.
Press and hold it down to completely clear
the input field.
67
Asterisk / Shift: Press this key before entering
text to create upper case characters. You can also
use this key to move back one space on the
display screen.
0/Next: Press this key to enter a 0, or to move to
the next word when in T9 predictive word entry
mode.
Pound/Space: Press this key to insert a space
when entering text.
Numbers 1 - 9: If items on a menu are
numbered, these keys can be used to select them.
END: Press this key to exit the MiniBrowser and
return the phone to standby mode.
MENU: This key can be used to enter the
MiniBrowser menu at any time.
SEND: This key can be used to send a call.
OK / message key for selecting a highlighted
item.
Using links
Links have several purposes, including jumping to a different page, jumping to
a different site or even initiating a phone call from some sites. Links are shown
inside of brackets ([ ]), and you can normally use the left soft key to select a
link when it is highlighted.
68
Making a phone call while using the minibrowser
You may initiate a phone call from the MiniBrowser if the site you are using
supports this feature (the phone number may be highlighted and the left soft
key will appear as Call). Pressing the Call soft key will call the number. In most
cases you can also use
to call the number. The Internet connection will be
terminated when you initiate the call. After you end the call, your phone will
return to standby mode.
Planner
The Planner allows you to add events in a calendar. They can be viewed at
anytime. You can also set an alert to remind you of your plans.
1. In standby mode, press
2. Press for Planner.
to display the Main menu.
3. Press to highlight an option. The available options are:
•Today
•Scheduler
•Jump To Date
•To Do List
•Memo Pad
•Count Down
•Alarm Clock
•World Time
•Calculator
4. Press
to open that option.
Today
You can schedule up to 9 events for the current day by indicating each event’s
start and end time. You can be alerted by an alarm before an event is to
commence. Events that are scheduled for future dates automatically appear on
your Today events schedule on that particular day.
69
How to add, edit, or erase an event
1. In standby mode, press
for the Planner.
2. Press
3. Press
to display Today.
.
4. Press for the following options:
•Add New: Allows you to add an event
•Edit: Allows you to edit an event
•Erase: Allows you to erase an event
•Erase all: Allows you to erase all scheduled events
5. Press
to select the option of choice, and complete the exercise by
following the prompts.
Scheduler
Scheduler allows you to view in calendar format the current month, a past
month or a future month. In Scheduler, the current date is highlighted on the
calendar. Days with scheduled events are underlined.
How to view an event
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Planner.
for Scheduler.
4. A current calendar screen displays. The current date is highlighted.
5. Press right/left to select a new date.
6. Press up/down to view a new week.
7. Press the to view a new month.
8. Pressing
•View: Permits you to view the previous entries for that date
•Add New: Permits you to add a new entry for that date.
at a selected date, offers the following options:
70
9. Use the navigation key to highlight Add New.
10. Press to enter the option.
Jump to date
Jump To Date allows you to specify the calendar date you want to view. You can
enter, edit, and/or erase events in your calendar.
Using jump to date:
1. In standby mode, press
.
2. Press
3. Press
for Planner.
for Jump To Date.
4. Enter the date you want then press
.
To do list
The To Do List allows you to compile a list of items to be completed. Your
phone can store, prioritize and manage twenty To Do List items.
Creating a to do list item:
1. In standby mode, press
for the Planner.
2. Press for To Do List. An Add To Do screen displays.
3. Use the navigation key to set the priority for a To Do List item. Your
choices are High and Low.
71
Memo pad
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
5. Press
for Planner
for Memo Pad.
to view old memos.
to view the following options:
•Add new
•Edit
•Erase
•Erase All
6. Choose your option and press
.
7. Press
to view the following options:
•T9 Word
•ABC
•Symbol
•123
8. Press to highlight an option.
9. Press
to select the option.
Count down
Count Down allows you to find out how much time will elapse between the time
entered and a scheduled event. You can create up to twenty Countdown timers.
•
and
Countdowns can be entered for dates between the years 1981 and 2099.
for the Planner.
for Count Down. The screen prompts for a new Count
Down. Enter a name for your new Count Down timer.
3. Press
are equal to A.M. and P.M.
•
1. In standby mode, press
2. Press
.
72
4. Enter the date and time you want to Count Down to. For example: if
today’s date is April 1, 2002 and you want to know how many months,
days, and hours remain before 7:00 P.M. February 14th 2003, enter the
time 07:00 P.M. and the date 02/14/2003.
5. Press
to store the Count Down timer.
How to view, edit, add or erase a count down timer
1. In standby mode, press
for the Planner.
2. Press for Count Down. Countdown timers display in order of the
least amount of time passed since the countdown commenced, and least
amount of time remaining until the specified date.
3. Press
4. Press
to open the options.
to select the option. Use the navigation key to find the item
you want to change and follow the prompts.
5. Press at any time to exit the exercise.
Alarm clock
Your phone has an Alarm Clock that can be set to go off once, or daily at a
specified time.
Once set, the Alarm Clock is easy to change or turn off completely.
To set the Alarm Clock:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Planner.
for Alarm Clock.
4. Press to the option you want to use.
5. Press . The Alarm Clock menu opens.
73
6. Using the keypad, enter the time for the alarm to activate. Press
to
store the setting, or press
menu.
to return to the previous alarm options
Your phone only supports a 12 hour time display, it is necessary to press
either , or . These keys represent A.M. and P.M. respectively.
Note: Once an alarm is set, an alarm clock icon
displays on the screen
in standby mode. When the alarm is turned off the alarm clock icon
is removed.
World time
Informs you of the time of day, or night in another part of the world. World
Time displays the time in 12 different time zones around the world, in one or
more major cities, states, regions or countries. It should be noted that World
Time does not support Daylight Savings Time for countries other than the USA.
Checking current time world wide
1. In standby mode, press
for the Planner.
2. Press for World Time. The screen displays a world map. The city,
country, time and date are indicated by a longitude indicator. You can
navigate up/down, left/right to reach the city and time you need.
• Alaska
• San Francisco
• New York
• Mid Atlantic
• Paris
• Abu Dhabi
• Bangkok
• Guam
• Denver
• Chicago
• Brasilia
• London
• Moscow
• Alma-ata
• Seoul
• Caracas
• Cape Verde
• Athens
• Tashkent
• Hongkong
• Okhotsk
• Honolulu
• Wellington
• Samoa
74
Calculator
You can perform calculations, including addition, subtraction, multiplication
and division using your phone.
To perform a calculation:
Use
to enter a decimal point, and
to change the sign for a number to
a negative.
1. In standby mode, press
for the Planner.
2. Press
for Calculator. The Calculator screen displays.
3. Use the keypad to enter the first number in your calculator. (Numbers
can be up to 9 digits long.)
4. Use the navigation key to set the operation for your calculator. Your
choices are:
•[+] Addition
•[-] Subtraction
•[x] Multiplication
•[÷] Division
5. Use the keypad to enter the second number into your calculator.
6. Press
to perform the calculation and view the result, or continue to
calculate with the same operator, or change the operator and continue.
Every time you change the operator, the previous calculation is
performed and the result is displayed as the bottom number on the
display screen.
7. Press
to perform the calculation and view the result.
75
Display
Press and hold the
key to turn on your phone.
The following features offered under the Display menu allow you to customize
your phone.
•Animation
•Banner
•Backlight
•Contrast
•Auto Hyphen
Note: Your front display will darken while in standby mode. Press and hold
the side volume key to luminate.
Animation
This feature allows you to choose from animations already available on your
phone:
To display an animated image:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Display.
for Animation.
4. Press to change one or all of the following options:
•Opening
•Closing
•Wallpaper
•Front display
5. Make your selection and press
to save.
76
Banner
This option allows you to edit and personalize a banner to display on your
phone while in Standby Mode.
Note: Enter the personal greeting using the keypad, Press
for T9 Word,
ABC, symbols and 123 options respectively
Note: The
key also navigates through the same options in identical
order, and can be pressed for upper case characters.
To create a banner:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Display.
for Banner.
Note: Press and hold
to erase an existing banner.
4. Enter your new banner (Up to 12 characters).
5. Press
to save.
Backlight
There are several options for setting the Backlight features.
Press any key and the backlight comes on.
Note: Backlight usage drains your battery faster.
To set the Backlight:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Display.
for Backlight.
4. Press to go through the menu options:
•Power save
•5 seconds
77
•10 seconds
•15 seconds
•Folder open
5. When the desired setting is reached, press
to save.
Note: Keypad backlight is always off when you set Power save mode.
The ¤Ó¤LCD will be dim for 15 seconds then go off in Power save mode.
Contrast
The LCD has contrast setting that can help you see the screen better in different
lighting conditions.
To set the LCD contrast:
1. Press
2. Press
3. Press
to display the menu.
for Display.
for Contrast.
4. Scroll between the contrast settings to determine what contrast is most
visible to you.
5. When the desired contrast setting displays, press
to save.
Auto hyphen
With the option set to Yes, your phone automatically hyphenates numbers. For
example: 972-761-0000.
To set the Auto Hyphen option:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Display.
for Auto Hyphen. The Yes and No options display.
78
4. Press to highlight an option.
5. Press to save.
Note: Press
to return to the previous menu at any time.
Sounds
Ringer options
Your phone provides a variety of ringer options through the Sounds menu.
These options allow you to customize your ringer type and ringer volume
settings in order to easily recognize a certain type of incoming call, message or
scheduled event.
Adjusting ringer volume (rapidly)
From standby mode, you can adjust the ringer to vibrate, 1-beep, Vib+Ring,
silent, or volume levels 1-5 using the
.
Adjusting voice volume during a call
You can adjust the handset as well as the (optional) headset volume during a
call by using the
.
Ringer volume
To adjust the volume using the Sounds ringer volume option:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Sounds.
for Volume/Vibrate.
4. Highlight your option and press
.
5. The screen immediately displays the volume icon
the bars of
which will change according to the setting chosen, you can also press
the down to change the setting. When the desired setting is reached,
press
to save.
79
6. Press
to return to the previous menu at any time.
Ringer type
Five monotone ringer types and ten melody tones can be found under the
ringer type option in the Sounds menu.
Ringer type — calls
To activate, view or change the ringer type for calls:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
for Sounds.
for Ringer Type.
for Calls.
5. Use the to navigate through the 5 monotone ringer types and 10 melody
tones. Each tone plays as you navigate through the options.
Note: When the lowest volume setting is reached, the phone automatically
goes into vibrate mode, physically alerting you to this option.
6. When the desired ringer type plays, press
to save the setting.
Note: You can press
to return to the previous menu at any time.
Ringer type — alarm
To activate, view or change the ringer type for the alarm:
1. In standby mode, press to display the Main menu.
2. Press
3. Press
4. Press
for Sounds.
for Ringer Type.
for Alarm.
5. Press the to hear tones. Each tone plays as you navigate through the
options.
6. When the desired ringer type plays, press
to save the setting.
80
Note: You can press
to return to the previous menu at any time.
Ringer type — data/fax incoming
To activate, view or change the ringer type for incoming data/fax
calls:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
for Sounds.
for Ringer Type.
for Data/Fax In.
5. Use the to hear tones. Each tone plays as you navigate through the
options.
6. When the desired ringer type plays, press
to save the setting.
Note: You can press
to return to the previous menu at any time.
Ringer type — planner
To activate, view or change the ringer type for your planner:
1. In standby mode, press to display the Main menu.
2. Press
3. Press
4. Press
for Sounds.
for Ringer Type.
for Planner.
5. Use the to hear tones. Each tone plays as you navigate through the
options.
6. When the desired ringer type plays, press
to save the setting.
Note: You can press
to return to the previous menu at any time.
81
Key beep
Key Beep allows you to adjust the tone length and volume level that the keypad
generates each time you press a key. The display icon shows up to 5 levels (the
loudest setting). No bars indicate that the key beep function is silenced.
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
for Sounds.
for Key Beep.
for Volume, or press
for Tone Length.
5. Press the to adjust level or tone.
6. When the desired level or tone is reached, press
to save the setting.
Note: You can press
to return to the previous menu at any time.
To mute DTMF:
1. Press
2. Press
3. Press
.
for Sound.
for Key beep.
for Volume.
4. Press
5. Use the or
to Silence tones.
. Your key beeps are now silenced during your call.
6. Press
To mute DTMF while using Earpiece/Headset:
1. Press
2. Press
3. Press
.
for Sound.
for Key beep.
4. Press
for Volume.
5. Use the or
to Silence tones.
. Your key beeps are now silenced during your call.
6. Press
82
Alerts
Your phone will beep from time to time, this beep is called an alert beep. Alert
beeps can easily be turned on or off. This feature offers the following options:
Minute beep, Service, Connect, Disconnect, Fade, Roam, and Privacy.
Alerts — minute beep
You can set the minute beep option to sound an alert 10 seconds before each
elapsed minute to remind you of the length of the current call.
To turn minute beep on or off:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Sounds.
for Alerts.
4. In this exercise select the Minute beep option. (For other Alerts/
exercises to work correctly, select the appropriate option.)
5. Press the
to choose between On or Off.
6. When the desired setting is reached, press
to save the setting.
Note: You can press
to return to the previous menu at any time.
Alerts — service
You can set the service alert option to sound an alert when the phone goes in
and out of service coverage areas.
Alerts — connect
With this option set to On, the phone sounds an alert when your call is
connected.
Alerts — disconnect
When this option is set to On, the phone sounds an alert when the phone
experiences a dropped or a failed call.
83
Note: You can press
to return to the previous menu at any time. When
a call experiences a failed or dropped call, a text message will display. Press
to clear the prompt and return to standby mode. If the dropped call
was an outgoing call from your phone, you can redial the number
automatically by pressing
twice.
Alerts —fade
When this option is set to On, the phone sounds an alert when a dropped call
occurs during conversation in response to a signal fade.
Alerts — roam
When this option is set to On, the phone sounds a unique tone when you leave
your home service area when on a call.
Alerts — privacy
The Privacy option allows you to set the security level of your phone to avoid
eavesdropping. You will hear a tone when this option is set to On.
Power on/off
Using this feature you can choose to have sound when you power on and off.
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
for Sounds.
for Power On/Off.
to choose between On or Off.
5. When the desired setting is reached, press
to save the setting.
84
Roam ringer
When this option is set to On, your phone sounds a unique tone when a call is
received in a network service area. This feature is set to On by default.
To set the Roam Ringer alert on or off:
1. In standby mode, press
to display the Main menu.
2. Press
for Sounds.
3. Press
for Roam Ringer.
4. Press the
to choose between On or Off.
5. When the desired setting is reached, press
to save the setting.
Note: You can press
to return to the previous menu at any time.
Whisper mode
This feature allows you to whisper when you are talking to a caller.
1. In standby mode, press to display the Main menu.
2. Press
3. Press
4. Press
for Sounds.
for Whisper Mode.
to choose between On or Off.
5. When the desired setting is reached, press
to save the setting.
Voice kit
You can call up to 20 stored names simply by speaking one of the names into
the microphone.
85
Voice dial
Your phone features Voice Dial(ing). Using the Voice Dialing feature requires
that you first program the phone to recognize the name of the person you are
calling.
Note: You can store only one voice dial entry per stored name. You CANNOT
store multiple entries for a stored name.
Tips on recording names
•
Avoid recording similar names phonetically. If you record a name similar
to one already stored in voice memory, the phone requests another
name.
•
•
•
Avoid recording in a noisy place.
Speak clearly and naturally.
Avoid very long or very short names. Names with two to five syllables are
recommended.
•
If a voice entry does not properly connect, you may need to record the
name and number again.
Record
The phone provides voice prompts and screen displays to guide you through
the recording process.
To program the phone for voice calling:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
for Voice kit.
for Voice Dial.
for Record. The phone will prompt you to say the name you
want to record.
86
5. Wait for the beep and then say the name. For best results, use names with
at least two syllables, or use both a first and last name. The phone stores
the name as a “first” sample, and then prompts you to say the name
again.
6. Respond to the prompt by repeating the name exactly as you did the first
time. The phone stores the name as a second sample and then requests
the phone number.
7. Enter the phone number using the keypad.
8. Press
to save the number.
9. The screen then returns to the Voice Dial menu.
Review
To review voice calling entries:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
5. Press
for Voice kit.
for Voice Dial.
for Review. A list of stored names and numbers display.
to highlight the desired entry and press . The recorded
name is vocalized.
Erase all
To erase all voice calling entries
1. In standby mode, press to display the Main menu.
2. Press
3. Press
4. Press
for Voice kit.
for Voice Dial.
for Erase All.
87
5. At the voice and screen prompt, press
to confirm that you want to
Erase All of the entries. A screen prompt will display when the entries
have been erased.
6. Press
at any time to exit without removing any voice entries.
Set active - voice dial
Voice dialing is always active once you have programmed the phone to accept
voice entries and the associated phone numbers. To place voice activated calls,
press and hold
name of the person you are calling into the phone or earbud microphone.
1. While in standby, press to display the Main menu
. After you hear the voice prompt and the beep, say the
2. Press
3. Press
4. Press
for Voice kit.
for Voice Dial.
to set Set Active.
•[*]Only
•[*]/Folder
•[*]/EarMic
Voice Memo
Use the following to create a Voice Memo to be heard at a later date:
1. In standby mode, press to display the Main menu.
2. Press
3. Press
4. Press
for Voice kit.
for Voice Memo.
for Record. The phone will prompt you to say what you want
to record.
Note: Pressing the Navigation key left allows you to pause your recording.
Pressing the Navigation key right allows you to re-record your memo.
5. Press
88
to confirm your memo.
Call screen
Use the following to have an incoming call automatically answered
and heard at a later date:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Voice kit.
for Call Screen.
The following options appear:
•On/Off
•Inbox
•Greeting
•Call Sound
•Wait Time
4. Use the
to highlight the option you want to change.
5. Press
to confirm your memo.
Setup
The following features allow you to personalize your phone.
Location
The settings allow you to turn the Location ON or 911 Only. When you first use
your phone this option is set to 911 Only. This option is automatically turned
ON when you place a call to 911. However, this option is turned back OFF when
your 911 call is completed.
Note: Check with your service provider to determine if/when/where location-
based services are available.
To turn Location ON or 911 Only:
1. Press
2. Press
for Main Menu.
for Location.
89
3. Press
4. Use
to display the Setting screen.
to select an option.
5. Press
to Save and exit.
Network
Your phone allows you to set the preferred system. Contact your service
provider to determine the best networking methods for you.
To select the network you want to use:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Use
for Setup.
for Network.
to select an option:
•Set Nam
•Roam Option
5. Press to save.
6. Pressing
returns you to the Setup menu.
Data/fax
Your phone is capable of sending and receiving digital data and fax calls when
connected to a computing device (laptop, desktop, hand held, palmtop, etc.)
running Windows 95, Windows 98, Windows 2000, Windows ME, Windows XP,
or Windows NT. Your phone functions just like a typical modem on your PC,
enabling you to use wireless data involving a wide variety of Windows software
applications.
To use digital data or fax services with your phone, you will need to obtain a
digital data/fax kit from your service provider. This kit will contain the
necessary cables, software, and documentation required for you to connect
and use your phone with your computing device.
90
To set up Data/Fax calls:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
5. Use
for Setup.
for Data/Fax.
for Auto Detect. The Auto Detect screen displays.
to select an option. The options are:
data/fax off, fax for next call, fax until powered off, data for next
call, and data until powered off.
6. Press
7. Pressing
to save your option of choice.
returns you to the previous screen.
•
•
data/fax off: No incoming Data/Fax calls can be received.
fax for next call: Waiting for Fax Call. No Voice Calls can be received
for next 10 minutes.
•
•
•
fax until powered off: No Voice Calls can be received.
data for next call: Waiting for data call. No voice calls can be received.
data until powered off: No voice calls can be received.
Receiving a fax
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Use
for Setup. Press
for Auto Detect.
for Data/Fax.
to highlight fax for next call.
to save this option.
5. Press
In the Fax program on your PC set up Answer Mode. Click on Receive and
select either Automatic Receive (recommended), or Manual Receive. Your
phone is now ready to receive an incoming fax.
91
Note: Once you have set your phone’s mode to fax for next call, you cannot
receive regular voice calls until you change back to data/fax off, or a fax is
received.
Ending a fax or data call
Some of the normal ways to end a call, like closing the phone, will not end a
fax or data call. Always close the connection through the application on your
computer. Your phone will return to standby mode. Disconnecting the data
cable or turning off your phone will also end a data or fax call, but may disrupt
your computer.
Sending a fax or data file
When connected to a computing device, your phone allows wireless fax and
data transmissions. Your computing device software initiates the call to the
destination phone number. Your phone functions as a wireless modem to send
the fax or data file to the number designated by your PC software.
Changing your phone back to voice calling
To change your phone back to voice calling:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Use
for Setup. Press
for Auto Detect.
for Data/Fax.
to highlight data/fax off.
5. Press
to save this option. The screen displays No incoming Data/
Fax calls can be received.
92
Security
Your phone provides security options, including a user-programmable lock
code and emergency/secret phone number features.
To access the Security menu in standby mode:
1. Press
.
2. Enter the 4-digit lock code (normally the lock code is the last 4-
digits of your phone number).
3. Make your selection from the following options:
•Lock Phone
•Change Lock
•Emergency #
•Voice Privacy
•Restriction
•Erase Memory
•Reset Phone
Lock phone
Locking the phone limits all outgoing calls except calls to 911 emergency and
the three user-programmable emergency/secret numbers.
You can lock the phone manually during use, or set the phone to lock
automatically when it is turned on. When the phone is in Lock Mode, you can
answer incoming calls, but you must unlock the phone to place outgoing calls
(except to emergency and secret numbers).
93
Locking the phone
The Security menu allows you to lock the phone manually or automatically
when powering on your phone or to leave the phone unlocked.
To lock the phone:
1. In standby mode, press
to display the Main menu.
for Security and enter your current lock code.
for Lock Phone.
to select your option.
2. Press
3. Press
4. Press the
•Never: The phone remains unlocked.
•Now: The phone locks immediately and stays locked until the lock
code is entered.
•On Power-Up: The phone locks automatically the next time your
phone is powered on and stays locked until the lock code is
entered.
Note: If you change your NAM1 setting after you have set your phone to lock
on power-up, and you did not program a number into NAM2 you will not be
able to access your phone. You must call the Service Center to unlock your
phone.
5. Press
to save the setting.
Unlocking the phone
Enter your phone’s lock code (last four digits of the phone number), and the
phone is immediately unlocked.
Calling in lock mode
You can place emergency calls using confidential numbers you program in
lock mode.
To place an outgoing call in lock mode:
To call 911 or a confidential number, enter the number and then press
.
94
Restricting the use of your phone
This feature allows you to restrict the use of your phone.
1. In standby mode, press
to display the Main menu.
for Security. Enter your current lock code.
for the Restriction options.
2. Press
3. Press
4. Use the
to restrict the use of your Outgoing calls, Incoming calls,
and your Phone Book.
5. Press
6. Use the
7. Press
.
to select Yes or NO.
to save.
Lock code
The default lock code for your phone is generally the last four digits of your
phone number. You can enter a personal lock code and later change the lock
code as often as you like.
To enter a new lock code:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Security. Enter your current lock code.
for Change Lock. The screen prompts ENTER NEW CODE.
Enter a new, 4-digit lock code by pressing the keypad. You will be
prompted to RE-ENTER NEW CODE. Enter the same 4-digit lock code.
Note: Your phone does not allow viewing of the lock code unless you know
the lock code (this is for obvious security reasons). So, if you change the
lock code, be sure to write down or memorize the new code.
95
Emergency number
Your phone provides the option of storing three emergency numbers. Each
number can be up to 32 digits.
All emergency numbers can be manually called at any time even when your
phone is locked or restricted. This can be a useful feature for controlling what
numbers can be called from your phone.
Note: Emergency number 911 is hard-coded into your phone. You can dial
these numbers and press
at any time, even when the phone is locked
or restricted. If you call 911 an audible tone is heard and an Emergency
prompt is displayed during the duration of the call.
Because of various transmission methods, network parameters, and user
settings used to complete a call from your wireless phone, a connection cannot
always be guaranteed.
Therefore, emergency calling may not be available on all wireless networks at
all times.
DO NOT depend on this phone as a primary method of calling 911 or
for any other essential or emergency communications.
Remember to always turn your phone on and check for adequate signal
strength before placing a call.
Storing emergency numbers
To store emergency numbers:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Setup.
for Security.
4. Enter your current lock code.
5. Press
for Emergency #.
96
6. Press
,
, or
to select from the three entry openings.
7. Enter the emergency number. Up to 32 digits can be entered for each
number.
8. Press
9. Press
to save the number entered.
to exit and return to the previous menu.
Calling emergency numbers in lock mode
To call emergency numbers in lock mode:
1. In standby mode, use the keypad to enter the emergency number.
2. Press
to place the call.
Erase memory
Erase memory erases your Phone Book and Voice Dial recordings. Personal
settings (the call log, Messages, Schedules, or other phone feature settings),
are unaffected by erasing the memory on your phone. This feature is useful if
you want to give your phone to a friend or family member, or if you want to
erase all of your phone numbers.
To erase your phone’s memory:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
for Security. Enter your current lock code.
for Erase Memory. A confirmation prompt will display.
to erase the phone’s memory, or press
to cancel the
operation.
Note: After a few seconds, a prompt Erased message will display and the
phone will return to standby mode.
97
Resetting your phone
Resetting the phone returns all setup options to the factory default settings.
To reset the phone:
1. In standby mode, press
to display the Main menu.
2. Press
for Setup and Security
3. Enter your current lock code.
4. Press
for Reset Phone. A confirmation prompt displays asking if
you want to Proceed.
5. Press
to reset the phone or press
to cancel the operation.
Call answer
With this option activated, your phone will allow you to select a specific answer
mode when you receive an incoming call. Your phone can be preset to answer
when you do any of the following:
•SEND key: You can answer the phone by pressing
.
•Any key: You can answer the call by pressing any key except
.
•Folder open: Opening your phone will answer your call.
To set Call answer:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Use
for Setup.
for Call Answer. The Call Answer screen displays.
to highlight an option.
5. Press
6. Pressing
to save your option.
returns you to the previous screen.
98
Auto answer
With this option activated, your phone will automatically answer calls after the
specified number of seconds. This options is useful when driving.
If Auto Answer is set to Off the phone will not answer an incoming call. If you
do not answer the call it is automatically stored in the Missed Call log.
To enable Auto Answer:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
for Setup.
for Auto Answer. The Auto Answer screen displays.
to highlight one of the available options:
•off
•after 1 sec
•after 3 sec
•after 5 sec
5. Press
to save.
6. Pressing
returns you to the previous screen.
Auto retry
With this option activated, your phone automatically dials the number when a
connection fails. Dependent upon your location, the number of times your
phone automatically dials the number may vary.
To enable Auto Retry.
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
for Setup.
for Auto Retry. The Auto Retry screen displays.
to highlight an option. The options are:
off, every 10 seconds, every 30 seconds and every 60 seconds.
99
5. Press
to save your option.
6. Pressing
returns you to the previous screen.
Language
The language option on your phone can change the language of voice prompts,
menus, and key-input.
To change the language:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
4. Press
5. Press
for Setup.
for Language.
to highlight the language required.
to save.
Note: You can press
to return to the previous menu at any time.
Clock set
Your phone is equipped with a standard clock and a dual clock for seeing time
in multiple cities or countries. Your phone automatically displays the time and
date when in digital mode. This same information is unavailable on the screen
when your phone is out of service or when powered up.
To manually set the time and date:
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for the Setup.
for Clock Set. The Main Clock and Dual Clock options
display.
100
To set Main Clock:
1. Press the
to highlight Main Clock.
2. Press
3. Enter the time (using the 12 hour format) and date. Use
and for P.M.
4. When the desired setting displays, press
.
for A.M.
to save.
Note: You can press
to return to the previous menu at any time.
To set Dual Clock:
1. Press the
2. Press
to highlight Dual Clock.
.
3. Press the
left or right to select from the following:
•Location - Allows you to choose the country/city.
•Summer Time - To accommodate for Daylight savings time you
must manually set this option On or Off for each country/city
offered in Location.
4. Use the
set each option.
5. When the desired setting displays, press
to save.
Note: You can press
to return to the previous menu at any time.
101
Version
You can view both the software version and hardware version running on your
phone. This feature is helpful if you need to call your carrier.
Note: You can press
to return to the previous menu at any time.
1. In standby mode, press
to display the Main menu.
2. Press
3. Press
for Setup.
for Version. The hardware and software information
displays.
4. Press
to return to standby mode.
In-Use Menu
Your phone includes both a standby menu and an In-Use menu. The In-Use
menu is displayed by pressing
call.
while the phone is being used during a
The In-Use menu options are:
•
Mute/Unmute - Mutes or (Un)mutes your end of a phone conversation
so that the recipient can hear nothing except key tone.
•
Calls - Checks your call log for outgoing, incoming, and missed calls.
You can also erase the logs from this menu.
•
•
Phone Book - Accesses the Phone Book menu options.
Silent/Quit - Activates or deactivates the Silent keypad feature. When set
to the silent mode, your keypad’s tone is not sent out to the calling party.
However, this feature should not be used when you access automated
services that require you to select options, or enter numbers using the
keypad.
•
Send Tel # - Sends your phone number to the calling party or automated
services.
102
•
•
My Phone # - Displays the phone’s own number.
Version - Displays the version of the software and hardware that is being
used on the phone.
•
Voice Privacy - Gives you the option of having enhanced or standard
privacy.
•
•
Location - Displays whether GPS is set to On or 911 only.
Send DTMF - This menu item allows the user to manipulate the audible
keypad tones.
103
Usage guidelines:
All about performance and safety
Getting the Most Out of Your Reception
The quality of each call you make or receive depends on the signal strength in
your area. Your phone informs you of the current signal strength by displaying
a number of bars next to the signal strength icon. The more bars displayed, the
stronger the signal.
If you’re inside a building, being near a window may give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of searching, a Power
Save feature is automatically activated. If your phone is active, it periodically
rechecks service availability or you can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays on the screen.
When a signal is found, your phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it’s turned on, it
receives and transmits radio frequency (RF) signals. When you use your
phone, the system handling your call controls the power level. This power can
range from 0.006 watts to 0.2 watts in digital mode.
Knowing Radio Frequency Safety
The design of your phone complies with updated NCRP standards described
below.
In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE) and the
American National Standards Institute (ANSI) joined in updating ANSI’s 1982
standard for safety levels with respect to human exposure to RF signals. More
than 120 scientists, engineers and physicians from universities, government
104
health agencies and industries developed this updated standard after reviewing
the available body of research. In 1993, the Federal Communications
Commission (FCC) adopted this updated standard in a regulation. In August
1996, the FCC adopted hybrid standard consisting of the existing ANSI/IEEE
standard and the guidelines published by the National Council of Radiation
Protection and Measurements (NCRP).
Maintaining Your Phone’s Peak Performance
Note: For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the warranty.
There are several simple guidelines to operating your phone properly and
maintaining safe, satisfactory service.
•
Hold the phone with the antenna raised, fully-extended and over your
shoulder.
•
•
•
•
Try not to hold, bend or twist the phone’s antenna.
Don’t use the phone if the antenna is damaged.
Speak directly into the phone’s receiver.
Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove the
battery. If it’s inoperable, return it to a an authorized service provider or
call Customer Care for service.
105
Maintaining Safe Use of and Access to Your Phone
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY
FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN THE U.S.A., USE AN ATTACHMENT
PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET.
Using Your Phone While Driving
Talking on your phone while driving is illegal in some states. Even where it’s
not, it can divert your attention from driving. Remember that safety always
comes first.
When using your phone in the car:
•
•
•
•
Get to know your phone and its features, such as speed dial and redial.
When available, use a hands-free device.
Position your phone within easy reach.
Let the person you are speaking to know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions.
•
•
Do not take notes or look up phone numbers while driving.
Dial sensibly and assess the traffic; if possible, place calls when you
stationary or before pulling into traffic.
•
•
Do not engage in stressful or emotional conversations that may divert
your attention from the road.
Dial
to report serious emergencies. It’s free from your
wireless phone.
•
Use your phone to help others in emergencies.
106
•
Call special non-emergency wireless number when necessary.
Following Safety Guidelines
Note: Always turn off the phone in health care facilities and request
permission before using the phone near medical equipment.
To operate your phone safely and efficiently, always follow any special
regulations in a given area. Turn your phone off in areas where use is
forbidden or when it may cause interference or danger.
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF)
signals. However, RF signals from wireless phones may affect inadequately
shielded electronic equipment.
RF signals may affect improperly installed or inadequately shielded electronic
operating systems and/or entertainment systems in motor vehicles. Check with
the manufacturer or their representative to determine if these systems are
adequately shielded from external RF signals. Also check with the
manufacturer regarding any equipment that has been added to your vehicle.
Consult the manufacturer of any personal medical devices, such as
pacemakers and hearing aids, to determine if they are adequately shielded
from external RF signals.
Turning Off Your Phone Before Flying
Turn off your phone before boarding any aircraft. To prevent possible
interference with aircraft systems, the U.S. Federal Aviation Administration
(FAA) regulations require you to have permission from a crew member to use
your phone while the plane is on the ground. To prevent any risk of
interference, FCC regulations prohibit using your phone while the plane is in
the air.
107
Turning Off Your Phone in Dangerous Areas
To avoid interfering with blasting operations, turn off your phone when in a
blasting area or in other areas with signs indicating that two-way radios should
be turned off. Construction crews often use remote-control RF devices to set off
explosives.
Note: Never transport or store flammable gas, liquid or explosives in the
compartment of your vehicle that contains your phone or accessories.
Turn off your phone when you’re in any area that has a potentially explosive
atmosphere. Although it’s rare, your phone or its accessories could generate
sparks. Sparks could cause an explosion or a fire resulting in bodily injury or
even death. These areas are often, but not always, clearly marked. They
include:
•
•
•
•
Fueling areas such as gas stations.
Below deck on boats.
Fuel or chemical transfer or storage facilities.
Areas where the air contains chemicals or particles such as grain, dust or
metal powders.
•
Any other area where you would normally be advised to turn off your
vehicle’s engine.
Restricting Children’s Access to your Phone
Your phone is not a toy. Children should not be allowed to play with it because
they could hurt themselves and others, damage the phone or make calls that
increase your phone bill.
Caring for the Battery
The guidelines listed below help you get the most out of your battery’s
performance.
108
•
•
•
Use only Samsung-approved batteries and desktop chargers. These
chargers are designed to maximize battery life. Using other batteries or
chargers voids your warranty and may cause damage.
In order to avoid damage, charge the battery only in temperatures that
range from 32º F to 104º F
(0º C to 40º C).
Don’t use the battery charger in direct sunlight or in high humidity areas,
such as the bathroom.
•
•
•
•
Never dispose of the battery by incineration.
Keep the metal contacts on top of the battery clean.
Don’t attempt to disassemble or short-circuit the battery.
The battery may need recharging if it has not been used for a long period
of time.
•
It’s best to replace the battery when it no longer provides acceptable
performance. It can be recharged hundreds of times before it needs
replacing.
Don’t store the battery in high temperature areas for long periods of time. It’s
best to follow these storage rules:
Less than one month:
32º F to 131º F (0º C to 55º C)
More than one month:
32º F to 104º F (0º C to 40º C)
Disposal of Lithium Ion (Li-Ion) Batteries
Note: For safety, do not handle a damaged or leaking Li-Ion battery.
For safe disposal options of your Li-Ion batteries, contact your nearest
Samsung-authorized service center.
109
Special Note: Be sure to dispose of your battery properly. In some areas, the
disposal of batteries in household or business trash may be prohibited.
Acknowledging Special Precautions and FCC
FCC Notice
The phone may cause TV or radio interference if used in close proximity to
receiving equipment. The FCC can require you to stop using the phone if such
interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or butane) must
comply with the National Fire Protection Standard (NFPA-58). For a copy of
this standard, contact the National Fire Protection Association, One
Batterymarch Park, Quincy, MA 02269, Attn: Publication Sales Division.
Cautions
Any changes or modifications to your phone not expressly approved in this
document could void your warranty for this equipment, and void your authority
to operate this equipment. Only use approved batteries, antennas and
chargers. The use of any unauthorized accessories may be dangerous and void
the phone warranty if said accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of equipment and
can be broken. Avoid dropping, hitting, bending or sitting on it.
Body-Worn Operation
To maintain compliance with FCC RF exposure guidelines, if you wear a
handset on your body, use the Samsung supplied or approved carrying case,
holster or other body-worn accessory. If you do not use a body-worn
accessory, ensure that the antenna is at least one inch (2.5 centimeters) from
your body when transmitting. Use of non- Samsung approved accessories may
violate FCC RF exposure guidelines.
110
For more information about RF exposure, please visit the FCC website at
www.fcc.gov.
Specific Absorption Rates (SAR) for Wireless
Phones
The SAR is a value that corresponds to the relative amount of RF energy
absorbed in the head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing, measuring and
calculation process. It does not represent how much RF the phone emits. All
phone models are tested at their highest value in strict laboratory settings. But
when in operation, the SAR of a phone can be substantially less that the level
reported to the FCC. This is because of a variety of factors including its
proximity to a base station antenna, phone design and other factors. What is
important to remember is that each phone meets strict federal guidelines.
Variations in SARs do not represent a variation in safety.
All phones must meet the federal standard, which incorporates a substantial
margin of safety. As stated above, variations in SAR values between different
model phones do not mean variations in safety. SAR values at or below the
federal standard of 1.6 W/kg are considered safe for use by the public.
This wireless portable device has been shown to be capable of compliance for
localized specific absorption rate (SAR) for uncontrolled environment/general
population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and has
been tested in accordance with the measurement procedures specified in
ANSI/IEEE Std. C95.3-1992.
Part 22 AMPS Mode - Head Max. SAR: 1.1860 W/Kg
Part 22 AMPS Mode - Body Max. SAR: 1.07 W/Kg
111
FDA Consumer Update
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are
associated with using wireless phones. There is no proof, however, that
wireless phones are absolutely safe. Wireless phones emit low levels of radio
frequency energy (RF) in the microwave range while being used. They also
emit very low levels of RF when in stand-by mode. Whereas high levels of RF
can produce health effects (by heating tissue), exposure to low level RF that
does not produce heating effects causes no known adverse health effects. Many
studies of low level RF exposures have not found any biological effects. Some
studies have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some cases, other
researchers have had difficulty in reproducing those studies, or in determining
the reasons for inconsistent results.
What is FDA’s role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-emitting consumer
products such as wireless phones before they can be sold, as it does with new
drugs or medical devices. However, the agency has authority to take action if
wireless phones are shown to emit radio frequency energy (RF) at a level that
is hazardous to the user. In such a case, FDA could require the manufacturers
of wireless phones to notify users of the health hazard and to repair, replace or
recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory actions, FDA
has urged the wireless phone industry to take a number of steps, including the
following:
•
Support needed research into possible biological effects of RF of the type
emitted by wireless phones;
112
•
•
Design wireless phones in a way that minimizes any RF exposure to the
user that it is not necessary for device function; and
Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human health.
FDA belongs to a interagency working group of the federal agencies that have
responsibility for different aspects of RF safety to ensure coordinated efforts at
the federal level. The following agencies belong to this working group:
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Committee
Occupational Safety and Health Administration
The National Institutes of Health participates in some interagency working
group activities, as well.
FDA shares regulatory responsibilities about wireless phones with the Federal
Communications Commission (FCC). All phones that are sold in the United
States must comply with FCC safety guidelines that limit RF exposure. FCC relies
on FDA and other health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks rely
upon. While these base stations operate at higher power than do the wireless
phones themselves, the wireless exposures that people get from these base
stations are typically thousands of times lower than those they get from wireless
phones. Base stations are thus not the subject of the safety questions discussed
in this document.
What kinds of phones are the subject of this update?
The term “wireless phones” refers here to hand-held wireless phones with
built-in antennas, often called “cell,” “mobile,” or “PCS”. These types of
wireless phones can expose the user to measurable radio frequency energy
113
(RF) because of the short distance between the phone and the user’s head.
These RF exposures are limited by Federal Communications Commission safety
guidelines that were developed with the advice of FDA and other federal health
and safety agencies. When the phone is located at greater distances from the
user, the exposure to RF is drastically lower because a person’s RF exposure
decreases rapidly with increasing distance from the source. The so-called
“cordless phones” which have a base unit connected to the phone wiring in a
house, typically operate at far lower per levels, and thus produce RF exposures
far below the FCC safety limits.
What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies
have suffered from flaws in their research methods. Animal experiments
investigating the effects of radio frequency energy (RF) exposures
characteristic of wireless phones have yielded conflicting results that often
cannot be repeated in other laboratories. A few animal studies, however, have
suggested that low levels of RF could Accelerate the development of cancer in
laboratory animals. However, many of the studies that showed increased tumor
development used animals that had been genetically engineered or treated with
cancer-causing chemicals so as to be pre-disposed to develop cancer in
absence of RF exposure. Other studies exposed the animals to RF for up to 22
hours per day. These conditions are not similar to the conditions under which
people use wireless phones, so we don’t know with certainty what results of
such studies mean for human health.
Three large epidemiology studies have been published since December 2000.
Between them, the studies investigated any possible association between the
use of wireless phones and primary brain cancer, glaucoma, meningioma, or
acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other
cancers. None of the studies demonstrated the existence of any harmful health
effects from wireless phones RF exposures. However, none of the studies can
114
answer questions about long-term exposures, since average period of phone
use in these studies was around three years.
What research is needed to decide whether RF exposure from
wireless phones poses a health threat?
A combination of laboratory studies and epidemiological studies of people
actually using wireless phones would provide some of the data that are needed.
Lifetime animal exposure studies could be completed in a few years. However,
very large numbers of animals would be needed to provide reliable proof of a
cancer promoting effect if one exists. Epidemiological studies can provide data
that is directly applicable to human populations, but ten or more years’ follow-
up may be needed to provide answers about some health effects, such as
cancer. This is because the interval between the time of exposure to a cancer-
causing agent and the time tumors develop - if they do - may be many, many
years. The interpretation of epidemiological studies is hampered by difficulties
in measuring actual RF exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the angle at which the phone is
held, or which model of phone is used.
What is FDA doing to find out more about the possible health
effects of wireless phone RF?
FDA is working with the U.S. Toxicology Program and with groups of
investigators around the world to ensure that high priority animal studies are
conducted to address important questions about the effects of exposure to
radio frequency energy (RF).
FDA has been a leading participant in the World Health Organization
International Electromagnetic Fields (EMF) Project since its inception in 1996.
An influential result of tis work has been the development of a detailed agenda
of research needs that has driven the establishment of new research programs
115
around the world. The project has also helped develop a series of public
information documents on EMF issues.
FDA and the Cellular Telecommunications & Internet Association (CTIA) have a
formal Cooperative Research and Development Agreement (CRADA) to do
research on wireless phone safety. FDA provides the scientific oversight,
obtaining input from experts in government, industry, and academic
organizations. CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both laboratory
studies and studies of wireless phone users. The CRADA will also include a
broad assessment of additional research needs in the context of the latest
research developments around the world.
How can I find out how much radio frequency energy
exposure I can get by using my wireless phone?
All phones sold in the United States must comply with Federal Communications
Commission (FCC) guidelines that limit radio frequency energy (RF)
exposures. FCC established these guidelines in consultation with FDA and other
federal health and safety agencies. The FCC limit for exposure from wireless
telephones is set at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram
(1.6 W/kg). The FCC limit is consistent with the safety standards developed by
the Institute of Electrical and Electronic Engineering (IEEE) and the National
Council on Radiation Protection and Measurement. The exposure limit takes
into consideration the body’s ability to remove heat from the tissue that absorb
energy from the wireless phone and is set well below levels known to have
effects.
Manufacturers of wireless phones must report the RF exposure level for each
model of phone to the FCC. The FCC website (http://www.fcc.gov/oet/rfsafety)
gives directions for locating the FCC identification number on your phone so
you can find your phone’s RF exposure level in the online listing.
116
What has FDA done to measure the radio frequency energy
coming from wireless phones?
The Institute of Electrical and Electronic Engineers (IEEE) is developing a
technical standard for measuring the radio frequency energy (RF) exposure
from wireless phones and other wireless hand sets with the participation and
leadership of FDA scientists and engineers. The standard, “Recommended
Practice for Determining the Spatial-Peak Specific Absorption Rate (SAR) in
the Human Body Due to Wireless Communications Devices: Experimental
Techniques,” sets forth the first consistent test methodology for measuring the
rate at which RF is deposited in the heads of wireless phone users. The test
method uses a tissue-simulating model of the human head. Standardized SAR
test methodology is expected to greatly improve the consistency of
measurements made at different laboratories on the same phone. SAR is the
measurement of the amount of energy absorbed in tissue, either by the whole
body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of
matter. This measurement is used to determine whether a wireless phone
complies with safety guidelines.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products--and at this point we do not know that
there is--it is probably very small. But if you are concerned about avoiding even
potential risks, you can take a few simple steps to minimize your exposure to
radio frequency energy (RF). Since time is a key factor in how much exposure
a person receives, reducing the amount of time spent using a wireless phone
will reduce RF exposure.
If you must conduct extended conversations by wireless phone every day, you
could place more distance between your body and the source of the RF, since
the exposure level drops off dramatically with distance. For example, you could
117
use a headset and carry the wireless phone away from your body or use a
wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are harmful.
But if you are concerned about RF exposure from these products, you can use
measures like those described above to reduce your RF exposure from
wireless phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones,
including children and teenagers. If you want to take steps to lower exposure
to radio frequency energy (RF), the measured described above would apply to
children and teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the RF source will
reduce RF exposure.
Some groups sponsored by other national governments have advised that
children be discouraged from using wireless phones at all. For example, the
government in the United Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no evidence exists that
using a wireless phone causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by children was strictly
precautionary; it was not based on scientific evidence that any health hazard
exists.
What about wireless phone
interference with medical equipment?
Radio frequency energy (RF) from wireless phones can interact with some
electronic devices. For this reason, FDA helped develop a detailed test method
to measure electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones. This test method is
now part of a standard sponsored by the Association for the Advancement of
118
Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical
device manufacturers, and many other groups, was completed on late 2000.
This standard will allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI.
FDA has tested hearing aids for interference from handheld wireless phones
and helped develop a voluntary standard sponsored by the Institute of
Electrical and Electronic Engineers (IEEE). This standard specifies test
methods and performance requirements for hearing aids and wireless phones
so that no interference occurs when a person uses a “compatible” phone and a
“compatible” hearing aid at the same time. This standard was approved by the
IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible interactions
with other medical devices. Should harmful interference be found to occur,
FDA will conduct testing to assess the interference and work to resolve the
problem.
Where can I find additional information?
For additional information, please refer to the following resources:
•
•
•
•
•
FDA web page on wireless phones
(http://www.fda.gov/cdrh/phones/index.html)
Federal Communications Commission FCC) RF Safety Program
(http://www.fda.gov/oet/rfsafety)
International Commission on Non-Ionizing Radiation Protection
(http://www.icnirp.de)
World Health Organization (WHO) International EMF Project
(http://www.who.int/emf)
National Radiological Protection Board (UK)
(http://www.nrpb.org.uk)
119
CTIA Safety Information
Exposure to radio frequency signals
Your wireless hand held portable telephone is a low power radio transmitter
and receiver. When it is ON, it receives and also sends out radio frequency
(RF) signals.
In August, 1996, the Federal Communications Commissions (FCC) adopted
RF exposure guidelines with safety levels for hand-held wireless phones.
Those guidelines are consistent with the safety standards previously set by
both U.S. and international standard bodies:
•
•
•
ANSI C95.1 (1992)
NCRP Report 86 (1986)
ICNIRP (1996)
Those standards were based on comprehensive and periodic evaluations of
the relevant scientific literature. For example, over 120 scientists, engineers,
and physicians from universities, government health agencies, and industry
reviewed the available body of research to develop the ANSI Standard
(C95.1).
The design of your phone complies with the FCC guidelines (and those
standards).
Antenna care
Use only the specified of approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the phone and may
violate FCC regulations.
Phone operation
NORMAL POSITION: Hold the phone as you would any other telephone with
the antenna pointed up and over your shoulder.
120
Tips on efficient operation:
For your phone to operate most efficiently:
•
•
Extend your antenna fully.
Do not touch the antenna unnecessarily when the phone is in use.
Contact with the antenna affects call quality and may cause the phone to
operate at a higher power level than otherwise needed.
Driving
Check the laws and regulations on the use of wireless telephones in the areas
where you drive. Always obey them. Also, if using your phone while driving,
please:
•
•
•
Give full attention to driving--driving safety is your first responsibility.
Use hands-free operation, if available.
Pull off the road and park before making or answering a call if driving
conditions so require.
Electronic devices
Most modern electronic equipment is shielded from RF signals. However,
certain electronic equipment may not be shielded against RF signals from your
wireless phone.
Pacemakers
The Health Industry Manufacturers Association recommends that a minimum
separation of six (6”) inches be maintained between a hand-held wireless
phone and a pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research.
Persons with pacemakers:
121
•
Should ALWAYS keep the phone more than six inches from their
pacemaker when the pacemaker is turned on;
•
•
Should not carry the phone in a breast pocket;
Should use the ear opposite the pacemaker to minimize the potential for
interference.
•
If you have any reason to suspect that interference is taking place, turn
your phone OFF immediately.
Hearing aids
Some digital wireless phones may interfere with some hearing aids. In the
event of such interference, you may want to consult your service provider (or
call the customer service line to discuss alternatives.) Optional for each
phone manufacturer.
Other medical devices
If you use any other personal medical device, consult the manufacturer of your
device to determine if they are adequately shielded from external RF energy.
Your physician may be able to assist you in obtaining this information.
Turn your phone OFF in health care facilities when any regulations posted in
these areas instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles. Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer of any
equipment that has been added to your vehicle.
122
Posted facilities
Turn your phone OFF in any facility where posted notices so require.
Aircraft
FCC regulations prohibit using your phone while in the air. Switch OFF your
phone before boarding an aircraft.
Blasting areas
To avoid interfering with blasting operations, turn your phone OFF when in a
“blasting area” or in areas posted: “Turn off two-way radio”. Obey all signs and
instructions.
Potentially explosive atmospheres
Turn your phone OFF when in any area with a potentially explosive atmosphere
and obey all signs and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury of even death.
Areas with a potentially explosive atmosphere are often but not always clearly
marked. They include fueling areas such as gasoline stations; below deck on
boats; fuel or chemical transfer or storage facilities; vehicles using liguefied
petroleum gas (such as propane or butane); areas where the air contains
chemicals or particles, such as grain, dust, or metal powders; and any other
area where you would normally be advised to turn off your vehicle engine.
For vehicles equipped with an airbag
An airbag inflates with great force. DO NOT place objects, including both
installed or portable wireless equipment, in the area over the air bag
deployment area. If in-vehicle wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
123
Owner's Record
The model number, regulatory number and serial number are located on a
nameplate inside the battery compartment. Record the serial number in the
space provided below. This will be helpful if you need to contact us about your
phone in the future.
Model:
Serial No.:
User Guide Proprietary Notice
CDMA Technology is licensed by QUALCOMM Incorporated under one or more
of the following patents:
4,901,3075,109,3905,267,2625,416,797
5,506,8655,544,1965,657,4205,101,501
5,267,2615,414,7965,504,7735,535,239
5,600,7545,778,338 5,228,054 5,337,338
5,710,7845,056,109 5,568,4835,659,569
5,490,1655,511,073
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat.
5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending.
124
Limited Warranty
1. What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, L.P. (“SAMSUNG”)
warrants the original (“Purchaser”) that SAMSUNG’s phones and
accessories (“Products”) are free from defects in material and
workmanship under normal use and service for a period commencing
on the date of purchase and continuing for the specified period of time
after the date:
•Phone - 1 year
•Batteries - 1 year
•Leather Cases/Pouch - 90 Days
•Holster - 90 Days
•Other Phone Accessories - 1 year
2. What is Not Covered?
The limited warranty is conditioned upon proper use of Product by
Purchaser. This limited warranty does not cover: (a) defects or damage
resulting from accident, misuse, abuse, neglect, unusual physical,
electrical, or electromechanical stress, modifications of any part of the
Product, including antenna, or cosmetic damage; (b) equipment that has
the serial number removed or made illegible; (c) any plastic surfaces or
other externally exposed parts that are scratched or damaged due to
normal usage; (d) malfunctions resulting from the use of Product in
conjunction with the accessories, products, ancillary, or peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance, installation, or
adjustment; (f) installation, maintenance, and service of product, or (g)
Product used or purchased outside the United States or Canada. This
Limited Warranty covers batteries only if the battery falls below 80% of
rated capacity or the battery leaks, and this Limited Warranty does not
125
cover any battery if (i) the battery has been charged by a battery charger
not specified or approved by SAMSUNG for charging the battery, (ii) any
of the seals on the battery are broken or show evidence of tampering, or
(iii) the battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
3. What are SAMSUNG’s Obligations?
During the applicable warranty period, SAMSUNG will repair or replace
at SAMSUNG’s sole option, without charge to purchaser, any defective
component part of the phone or accessory. To obtain service under this
limited warranty, purchaser must return Product to an authorized phone
service facility in an adequate container for shipping, accompanied by
Purchaser’s sales receipt or comparable proof of sale showing the date of
purchase, the serial number of Product, and the seller’s name and
address. To obtain information on where to deliver the phone or
accessory, call your service provider or Samsung Customer Care at (888)
987-4357. Upon receipt, SAMSUNG will promptly repair the defective
product. SAMSUNG may, at SAMSUNG’s sole option, use rebuilt,
reconditioned, or new parts or components when repairing any product
or replace a product with a rebuilt, reconditioned, or new product.
Repaired products will be warranted for a period equal to the remainder
of the original limited warranty on the original product or for 90 days,
whatever is longer. All replaced parts, components, boards, and
equipment becomes the property of SAMSUNG. If SAMSUNG determines
that any product is not covered by this limited warranty, purchaser must
pay all parts, shipping, and labor charges for the repair or return of said
product.
126
4. What Are the Limits On SAMSUNG’s Liability?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT “AS IS,” AND SAMSUNG
MAKES NO WARRANTY OR REPRESENTATION AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, OF
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING
BUT NOT LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
•
•
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
•
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSRUCTION MANUAL SHALL BE CONSTRUED
TO CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH
RESPECT TO THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS
THAT MAY ARISE BY OPERATION OF LAW, INCLUDING IF APPLICABLE THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN. SOME STATES/
PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN
ADDITION SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND
RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR
LOSS OF USE OF THE PRODUCT OR FROM BREACH OF THE EXPRESS
127
WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMULAR
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR
DAMAGES ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
NELIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS OR
EMPLOYEES, OR ANY BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT
AGAINST PURCHASER BY ANY OTHER PARTY. SOME STATES/PROVINCES DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY
NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE/PROVINCE TO
PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTENT TO ANYONE OTHER
THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER’S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED
WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW,
SUCH PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUCTED TO BE
LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THE PURCHASER MAY USE THIRD-PARTY
SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT. SAMSUNG
MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF
ANY THIRD-PARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-
PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE PRODUCT
DISTRIBUTED BY SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT. THE
QUALITY, CAPABILITIES OPERATIONS, PERFORMANCE AND SUITABILITY OF
128
ANY SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE
PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure between Purchaser and
SAMSUNG, and SAMSUNG’s Product pricing reflects this allocation of risk and
the limitations of liability contained in this Limited Warranty. The agents,
employees, distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional warranties binding
on SAMSUNG. Accordingly, additional statements such as dealer advertising or
presentation, whether oral or written, do not constitute warranties by
SAMSUNG and should not be relied upon.
Samsung Telecommunications America, Inc.
1130 East Arapaho Road
Richardson, Texas 75081
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2002 Samsung Telecommunications America, Inc. All rights reserved. No
reproduction in whole or in part allowed without prior written approval.
Specifications and availability subject to change without notice.
129
130
Index
0 / next key, 68
911, 96
A
Accessing menus, 32
Accessing menus using shortcut numbers, 33
Adjusting ringer volume, 79
Alarm clock, 73
Alerts, 83
Alerts - connect, 83
Alerts - disconnect, 83
Alerts - fade, 84
Alerts - service, 83
Alphabetical text entry, 53
Antenna, 17
Asterisk / shift key, 68
Auto answer, 99
B
Backlight features, 17
Battery Care, 108
C
Call answer, 98
Call timer, 36
Call waiting, 39
Calling in Lock Mode, 94
Calls, 33
Clear key, 17
CLR, 67
Count down, 72
D
Dangerous Areas, 108
E
Editing phone book numbers, 43
Emergency number, 96
END key, 68
Ending a fax or data call, 92
Entering numbers, 53
Entering text, numbers, and/or symbols, 52
Erase log, 35
Erase Message, 58
Exiting the web/minibrowser, 65
F
FCC Notice, 110
Find by entry, 41
Flying, 107
G
Get it now, 19
Getting service, 27
Getting to know your phone, 17
Green, 24
I
Inbox, 55
Incoming, 34
Input mode, 25
Installing the battery, 22
K
Key beep, 82
L
Last call, 37
Launching the minibrowser, 64
LED indicator, 18
Left soft key, 18
List of main and sub menus, 29
Lock Code, 95
Lock mode, 25
Lock phone, 93
Locking the phone, 94
M
Manual pause calling, 45
MENU key, 68
Message options, 62
Message setting, 59
Messages and lock mode, 57
Microphone, 18
Missed, 34
Mobile web, 64
N
Navigation, 19
Navigation key, 67
Network, 90
New messages, 54
Numbers 1-9, 68
Numeric keypad, 18
Numeric mode, 53
O
Ok/message, 68
One-touch dialing, 49
Outbox, 56
Outgoing, 33
Owner's Record, 124
P
Peak Performance, 105
Phone While Driving, 106
Phone while driving, 106
Planner, 69
Pound / space key, 68
Power On/Off, 84
Power Save Feature, 104
R
Radio Frequency, 104
Receiving a fax, 91
Reception, 104
Record, 86
Red, 24
Removing the battery, 23
Resetting your phone, 98
Reviewing calls, 35
Reviewing outbox, 56
Right soft key, 18
Ringer options, 79
Ringer type - data/fax incoming, 81
Ringer type - planner, 81
Roam, 84
S
Safe Use of and Access to Your Phone, 106
Safety Guidelines, 107
SCH-a530 closed view, 15
SCH-a530 open view, 16
Scroll timer, 59
Send key, 19
Sending a fax or data file, 92
Sending messages, 54
Set active, 88
Setup, 89
Speaker, 18
Special Precautions, 110
Storing emergency numbers, 96
Storing pauses in a phone book, 45
Symbol entry, 53
T
T9® Word, 54
Talk mode, 27
Three-touch dialing, 49
Tips on recording names, 86
Travel adapter, 23
Turning your phone off, 28
Turning your phone on, 28
Two-touch dialing, 49
U
Unlocking the Phone, 94
Usage guidelines, 104
User Guide Proprietary Notice, 124
Using the travel adaptor, 23
V
Version, 102
Vibrate, 27
Voice kit, 85
|