Sprint PCS® Service
Sprint PCS VisionSM Picture Phone
PM-A840 by Samsung®
www.sprintpcs.com
© 2005 Sprint. All rights reserved. No reproduction in whole or in part without
prior written approval. Sprint, the diamond logo design, and all other Sprint
marks referenced herein are trademarks of Sprint. All other trademarks are
the property of their respective owners.
Printed in South Korea
Table of Contents
Dialing and Saving Phone Numbers
With Pauses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Entering Numbers, Symbols, Emoticons, Preset
Messages and Recent Messages . . . . . . . . . . . . . . . . . . . .48
Saving a Phone Number From
Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Prepending a Phone Number From
Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
3A. Sprint PCS Service Features:
The Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
Sprint PCS Vision Connection Status and
Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215
Getting Started With Sprint PCS
Voice Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .236
Making a Call With Sprint PCS
Voice Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238
Accessing Information Using
Sprint PCS Voice Command . . . . . . . . . . . . . . . . . . . . . . .239
Section 4: Safety Guidelines
Warranty Information . . . . . . . . . . . . . . . . . . . . . 241
Maintaining Safe Use of and Access to
Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .245
Acknowledging Special Precautions
and the FCC Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . .249
Welcome to Sprint
Sprint has the most complete, all-digital wireless network in the
nation. Depend on it.
Sprint is committed to bringing you the best wireless
technology available. We built our complete, nationwide
network from the ground up, so all your services –
whether it’s Voicemail, Caller ID, email, or Sprint PCS
Picture Mail – will work the same wherever you go on the
Sprint Nationwide PCS Network.
This guide will familiarize you with our technology and
your new Sprint PCS Phone through simple, easy-to-follow
instructions. It’s all right here – from setting up your
account passwords and voicemail to using the most
advanced features of Sprint PCS VisionSM.
Sprint PCS. Now, that’s betterSM.
Welcome and thank you for choosing Sprint.
i
Introduction
This Phone Guide introduces you to Sprint PCS Service and
all the features of your new phone. It’s divided into four
sections:
ࡗ ࡗ ࡗ ࡗ Section 1: Getting Started
Section 2: Your Sprint PCS Phone
Section 3: Sprint PCS Service Features
Section 4: Safety Guidelines and Warranty Information
Throughout this guide, you'll find tips that highlight
special shortcuts and timely reminders to help you make
the most of your new phone and service. The Table of
Contents and Index will also help you quickly locate
specific information.
You'll get the most out of your phone if you read each
section. However, if you'd like to get right to a specific
feature, simply locate that section in the Table of Contents
and go directly to that page. Follow the instructions in that
section, and you'll be ready to use your phone in no time.
Due to updates in phone software, this printed guide
may not be the most current version for your phone.
access the most recent version of the phone guide.
Phone
Guide
Note:
ii
2
Section 1A
Setting Up Service
In This Section
ࡗ ࡗ ࡗ ࡗ Setting up service on your new Sprint PCS Phone is quick and
easy. This section walks you through the necessary steps to
unlock your phone, set up your voicemail, establish
passwords, and contact Sprint for assistance with your
Sprint PCS Service.
3
Getting Started With Sprint PCS Service
Determining if Your Phone is Already Activated
If you purchased your phone at a Sprint Store, it is
probably activated, unlocked, and ready to use. If you
received your phone in the mail, it probably has been
activated; all you need to do is unlock it.
If your phone is not activated, please refer to the
Welcome to Sprint brochure included with your phone.
Unlocking Your Phone
To unlock your phone, follow these easy steps:
1. Press and hold
for a few seconds to turn the
phone on.
2. Press Unlock ( ).
To select a softkey, press the softkey button directly below
the softkey text that appears at the bottom left and bottom
right of your phone’s display screen. Softkey actions
change according to the screen you’re viewing and will not
appear if there is no corresponding action available.
Note:
3. Enter your four-digit lock code. (For security
purposes, the code is not visible as you type.)
If you can’t recall your lock code, try using the last four
digits of either your Social Security number or Sprint PCS
Phone number or try 0000 or NATL (6285). If none of these
work, call Sprint Customer Service at 1-888-211-4PCS
(4727).
Tip:
4
Setting Up Your Voicemail
All unanswered calls to your Sprint PCS Phone are
automatically transferred to your voicemail, even if your
phone is in use or turned off. Therefore, you will want to
set up your voicemail and personal greeting as soon as
your Sprint PCS Phone is activated.
To set up your voicemail:
1. From standby mode, press and hold
.
2. Follow the system prompts to:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Create your pass code
Record your greeting
Record your name announcement
Choose whether or not to activate One-Touch
Message Access (a feature that lets you access
messages simply by pressing and holding
,
bypassing the need for you to enter your pass
code)
If you are concerned about unauthorized access to your
voicemail account, Sprint recommends you enable your
voicemail pass code.
Note:
For more information about using your voicemail, see
5
Sprint PCS Account Passwords
As a Sprint PCS customer, you enjoy unlimited access to
your personal account information, your voicemail
account, and your Sprint PCS Vision account. To ensure
that no one else has access to your information, you will
need to create passwords to protect your privacy.
Account Password
If you are the account owner, you'll have an account
calling Sprint Customer Service. Your default account
password is the last four digits of your Social Security
number. If you are not the account owner (if someone else
receives the invoice for your Sprint PCS Service), you can
Voicemail Password
You'll create your voicemail password (or pass code) when
on page 188 for more information on your voicemail
password.
Sprint PCS Vision Password
With your Sprint PCS Vision Picture Phone PM-A840 by
Samsung, you may elect to set up a Sprint PCS Vision
Password. This optional password may be used to
authorize purchase of Premium Services content and to
protect personal information on multi-phone accounts.
For more information, or to change your passwords, sign
1-888-211-4PCS (4727).
6
Getting Help
You can go online to:
ⅷ
Access your account information
ⅷ
Check your minutes used (depending on your
Sprint PCS Service Plan)
ⅷ
ⅷ
View and pay your bill
Make your life easier by enrolling in Sprint PCS Online
Billing and Automatic Payment
ⅷ
ⅷ
ⅷ
ⅷ
Purchase accessories
Shop for the latest Sprint PCS Phones
View available Sprint PCS Service Plans and options
Learn more about Sprint PCS Vision and other great
products like Sprint PCS Picture MailSM, games, ringers,
screen savers, and more
Reaching Sprint Customer Service
You can reach Sprint Customer Service many different
ways:
ⅷ
ⅷ
ⅷ
Dial
on your Sprint PCS Phone
Sign on to your account at www.sprintpcs.com
Call us toll-free at 1-888-211-4727 (Consumer customers)
or 1-888-788-4727 (Business customers)
ⅷ
Write to us at Sprint Customer Service, P.O. Box 8077,
London, KY 40742
7
Receiving Automated Invoicing Information
For your convenience, your phone gives you access to
invoicing information on your Sprint PCS Account. This
information includes balance due, payment received,
invoicing cycle, and an estimate of the number of minutes
used since your last invoicing cycle. (Normal airtime usage
will apply.)
To access automated invoicing information:
ᮣ
Press
.
This service may not be available in all Affiliate areas.
Note:
Sprint PCS Directory Assistance
You have access to a variety of services and information
through Sprint PCS Directory Assistance, including
residential, business, and government listings; assistance
with local or long-distance calls; movie listings; and hotel,
restaurant, shopping, and major local event information.
There is a per-call charge, and you will be billed for airtime.
To call Sprint PCS Directory Assistance:
ᮣ
Press
.
8
Sprint PCS Operator Services
Sprint PCS Operator Services provides assistance when
placing collect calls or when placing calls billed to a local
telephone calling card or third party.
To access Sprint PCS Operator Services:
ᮣ
Press
.
For more information or to see the latest in products and
Sprint PCS Operator Services may not be available in all
Affiliate areas.
Note:
Welcome and thank you for choosing Sprint.
9
12
Section 2A
Your Sprint PCS Phone: The Basics
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Your Sprint PCS Phone is packed with features that simplify your
life and expand your ability to stay connected to the people and
information that are important to you. This section will guide
you through the basic functions and calling features of
your phone.
13
Front View of Your Phone
1. Speaker
2. Display Screen
3. Headset Jack
21. Navigation Key
4. OK Key
20. Right Softkey
19. Side Camera Key
5. Left Softkey
6. Volume Key
18. BACK Key
17. END Key
16. Voice Command/
7. TALK Key
Speakerphone Key
8. Voicemail Key
9. Numeric Keypad
15. Space/Pound Key
10. Shift/Asterisk Key
14. Plus Code
Dialing Key
13. Microphone
11. Power Interface
Connector
12. Accessory Interface
Connector
14
Key Functions
1. Speaker: The speaker allows you to hear the other
caller and the different ring tones and sounds offered
by your phone.
2. Display Screen: This screen displays all the
information needed to operate your phone.
3. Headset Jack: Allows you to plug in an optional
headset for convenient, hands-free conversations.
4. OK Key: Pressing (
) when navigating through a
menu accepts the highlighted choice in the menu. If
you press once in standby mode, the Pictures menu is
displayed. If you press and hold, the camera is
launched.
5. Left Softkey: This key is used to navigate through
menus and applications by selecting the choice
available in the Left Softkey Option on your display
screen.
6. Volume Key: Allows you to adjust the ringer volume in
standby mode (with the flip open) or adjust the voice
volume during a call. The volume key can also be
used to scroll up or down to navigate through the
different menu options. To mute the ringer during an
incoming call, press the volume key up or down.
7. TALK Key: Allows you to place or receive a call. In
standby mode, press the key once to access the
Recent call log. If you press and hold the key down,
you will initiate the Voice Recognition feature.
8. Voicemail Key: Press and hold to automatically dial
your voicemail.
15
9. Numeric Keypad: Use these keys to enter numbers,
letters, and characters.
10. Shift/Asterisk Key: Enters the asterisk [*] character for
calling features. In text entry mode, press to change
the capitalization mode.
11. Power Interface Connector: This connector is used to
plug in the charging accessories.
12. Accessory Interface Connector: This connector is used
connect any available accessory cables to your
phone.
13. Microphone: The Microphone allows the other caller
to hear you clearly when you are speaking to them.
14. Plus Code Dialing Key: Automatically dials the
international access code for the country in which
you are located (for instance, 011 for international
calls placed from the United States).
15. Space/Pound Key: Enters the pound [#] character for
calling features. In text entry mode, press to enter a
space.
16. Voice Command/Speakerphone Key: Allows you to say
commands to perform common functions supported
by your phone or turns on or off the speakerphone
during a call. Press and hold the outer key or press
and release inner key to initiate speakerphone.
17. END Key: Ends a call. Press and hold this key for a few
seconds to turn your phone on or off. While in the
main menu, it returns the phone to standby mode
and cancels your input. When you receive an
incoming call, press to enter silent mode and mute
the ringer.
16
18. BACK Key: Deletes characters from the display when
you are in text entry mode. When in a menu, press to
return to the previous menu. This key also allows you
to return to the previous screen in a Sprint PCS Vision
session.
19. Side Camera Key: Allows you to launch the Camera
with the press of a button when the flip is open.
When the flip is closed, you can press and hold to
launch the camera using the external LCD as a
viewfinder.
20. Right Softkey: This key is used to navigate through
menus and applications by selecting the choice
available in the Right Softkey Option on your display
screen.
21. Navigation Key: This key allows you to scroll through
the phone menu options and provides a shortcut to
phone functions from standby mode.
17
Viewing the Display Screen
Your phone’s display screen provides a wealth of information
about your phone’s status and options. This list identifies the
symbols you’ll see on your phone’s display screen:
To view a list of your phone’s icons and descriptions, from
the main menu select Settings > Phone Info > Icon
Glossary.
Tip:
displays your current signal strength. The more
lines you have, the stronger your signal.
means your phone cannot find a signal.
tells you a call is in progress.
indicates that you have voicemail, text,
numeric pages, picture messages, or Sprint PCS
Web Alert messages waiting. Press
briefly to
see a list of pending messages or press and hold
to dial your voicemail box.
indicates that there is an unread message in
your inbox.
indicates that the text message has been read.
indicates that there is an unread urgent message
in your inbox.
indicates that you have read the urgent message.
indicates that you have new Sprint PCS Picture
Mail waiting in your inbox.
indicates that you have new voicemail.
indicates that you have a new text message.
18
indicates that the message was sent.
indicates that the message failed to send.
indicates that you have a pending message.
indicates that the message is a draft.
indicates that there is URL text contained in the
text message.
indicates that your Sprint PCS Vision connection
is active.
indicates that your Sprint PCS Vision connection
is dormant or inactive.
indicates that you are receiving information.
indicates that you are sending information.
indicates that your phone is in vibrate only
mode.
indicates that your phone is in ringer+vibrate
mode.
indicates that the ringer is set at a level
between 1-8 or that 1-Beep is selected.
indicates that the ringer is turned off or set to
Silence All.
indicates that the ringer is turned off with the
Vibrate option checked.
shows your current battery charge strength.
(Icon shown fully charged in idle mode and
completely empty.)
indicates that position location is active.
indicates that position location is inactive.
19
indicates that the TTY option is on.
indicates that your phone is roaming.
indicates that your message is locked.
indicates that your phone is in Web security
mode.
indicates that an alarm is set on your phone.
indicates that a file (ringer, game, screen saver,
java app, etc.) has been downloaded to your
phone.
indicates that the camera is enabled.
indicates that the self-timer function is enabled.
With the self-timer enabled, a set amount of time
is required prior to taking a picture.
indicates that the white balance has been set to
Sunny. This is used for taking pictures outdoors
on bright sunny days.
indicates that the white balance has been set to
Cloudy. This is used for taking pictures outdoors
under cloudy conditions.
indicates that the white balance has been set to
Tungsten. This is used for taking pictures
indoors under normal lighting conditions.
indicates that the white balance has been set to
Fluorescent. This is used for taking pictures
indoors under fluorescent lighting conditions.
indicates that the white balance has been set to
Manual. This is used for taking pictures indoors
or outdoors using your own custom settings.
20
indicates that a picture has been assigned a
function. An example may be Picture ID, Screen
Saver, or Incoming Call.
indicates that a picture has been uploaded to an
online album or folder.
indicates that a picture has been downloaded to
or from an online album or folder.
21
Features of Your Sprint PCS Phone
Congratulations on the purchase of your Sprint PCS Phone.
The Sprint PCS Vision Picture Phone PM-A840 by Samsung
is lightweight, easy-to-use, and reliable, and it also offers
many significant features and service options. The
following list previews some of those features and provides
page numbers where you can find out more:
ⅷ
Digital dual-band capability allows you to make and
receive calls while on the Sprint Nationwide PCS
Network and to roam on other 1900 and 800 MHz
digital networks where Sprint has implemented
ⅷ
ⅷ
Built-in Camera with up to ten zoom levels (page 163).
Missed events displayed on-screen in standby mode
ⅷ
ⅷ
Sprint PCS VisionSM provides access to the wireless
Sprint PCS Mail and SMS Text Messaging provide quick
page 198, respectively).
ⅷ
ⅷ
Sprint PCS Voice CommandSM lets you dial phone
numbers by speaking someone’s name or the digits of
Games, ringers, screen savers, and other applications
can be downloaded to make your Sprint PCS Phone as
apply.)
ⅷ
The contact list allows you to store up to 300 phone
numbers or email addresses (page 119).
22
ⅷ
ⅷ
The built-in Scheduler offers several personal
information management features to help you manage
your busy lifestyle (page 131).
Your Sprint PCS Phone is equipped with a Location
feature for use in connection with location-based
services that may be available in the future (page 64).
ⅷ
ⅷ
Features a large color screen.
Speed dial lets you dial phone numbers with one or
two key presses (page 43).
23
Turning Your Phone On and Off
Turning Your Phone On
To turn your phone on:
ᮣ
Flip the phone open, then press and release
.
Once your phone is on, it may display “Looking for
Service,” which indicates that your phone is searching for a
signal. When your phone finds a signal, it automatically
enters standby mode – the phone’s idle state. At this point,
you are ready to begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically activated.
When a signal is found, your phone automatically returns to
standby mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also
initiate a search for Sprint PCS Service by pressing any key
(when your phone is turned on).
The Power Save feature helps to conserve your battery
power when you are in an area where there is no signal.
Note:
Turning Your Phone Off
To turn your phone off:
ᮣ
Press and hold
until you see the powering off
animation on the display screen.
Your screen remains blank while your phone is off (unless
the battery is charging).
24
Using Your Phone’s Battery and Charger
Battery Capacity
Your Sprint PCS Phone is equipped with a Lithium Ion
(Li-Ion) battery. The standard battery provides up to 3.8
hours of continuous digital talk time and the extended
battery provides up to 5.0 hours of continuous digital talk
time.
When the battery reaches 5% of its capacity, the battery
icon blinks. When there are approximately two minutes of
talk time left, the phone sounds an audible alert and then
powers down.
Long backlight settings, searching for service, vibrate
mode, and browser use affect the battery talk and standby
times.
Note:
Be sure to watch your phone’s battery level indicator and
charge the battery before it runs out of power.
Tip:
25
Removing the Battery
To remove your battery:
1. Make sure the power is off so that you don’t lose any
stored numbers or messages.
2. Push the release button up located at the top of the
battery.
3. Pull the battery away and remove from the phone at a
45-degree angle.
27
Charging the Battery
Your Sprint PCS Phone’s Li-Ion battery is rechargeable and
should be charged as soon as possible so you can begin
using your phone.
Keeping track of your battery’s charge is important. If your
battery level becomes too low, your phone automatically
turns off and you will lose all the information you were just
working on. For a quick check of your phone’s battery
level, glance at the battery charge indicator located in the
upper-right corner of your phone’s display screen. If the
battery charge is getting too low, the battery icon
blinks and the phone sounds a warning tone.
Always use a Sprint-approved battery charger, travel
charger, or vehicle power adapter to charge your battery.
Using the wrong battery charger could cause damage
to your phone and void the warranty.
Warning!
28
Using the Charger
To use the travel charger provided with your phone:
ᮣ
Plug the round end of the AC adapter into the
phone’s power interface connector and the other end
into an electrical outlet.
Ⅲ
A red indicator light on the phone lets you know the
battery is charging.
Ⅲ
A green indicator light on the phone lets you know
that the battery is at least 90 percent charged.
It takes approximately 4 hours to fully recharge a
completely rundown battery. With the Sprint-approved
Li-Ion battery, you can recharge the battery before it
becomes completely run down.
Displaying Your Phone Number
Just in case you forget your phone number, your Sprint PCS
Phone can remind you.
To display your phone number:
ᮣ
Press Menu ( ) to access the main menu, select
Settings ( ), Phone Info ( ), and Phone Number
). (Your phone number and other information
about your phone and account will be displayed.)
(
29
Making and Answering Calls
Making Calls
Placing a call from your Sprint PCS Phone is as easy as
making a call from any land line phone. Just enter the
number and press
calls.
, and you’re on your way to clear
To make a call using your keypad:
1. Make sure your phone is on.
2. Enter a phone number. (If you make a mistake while
dialing, press
and hold
to erase one digit at a time. Press
to erase the entire number.)
3. Press
Call Guard is enabled, press
“Call Guard” on page 91.)
. (To make a call when you are roaming and
and then . See
4. Press
or close the phone when you are finished.
You can also place calls from your Sprint PCS Phone by
30
Dialing Options
When you enter numbers in standby mode, a number of
options are available to you. Press Options ( ) to perform
the following actions:
ⅷ
Dial: dials the number or digits displayed.
ⅷ
Send Msg: allows you to send a picture, text,
handwritten, or voice SMS message with attachments
to the number being dialed.
ⅷ
Save: Enter a seven to ten digit number (phone number
and area code) and press
to save the phone
number in your Contacts. (See “Saving a Phone
ⅷ
Find: Enter one or more digits and press
Select Find to display contact entries that end with the
entered numbers. (See “Finding a Phone Number” on
(Options).
ⅷ
ⅷ
Hard Pause: allows you to enter a hard pause. To
2sec Pause: allows you to enter a 2 second pause. The
phone will pause, then continue dialing without any
additional keys being pressed. (See “Dialing and Saving
31
Answering Calls
To answer an incoming call with the flip open:
1. Make sure your phone is on. (If your phone is off,
incoming calls go to voicemail.)
2. Press
or
to answer an incoming call.
Depending on your phone’s settings, you may also
answer incoming calls by opening the flip or by
on page 73 for more information.)
To answer an incoming call with the flip closed:
1. Make sure your phone is on. (If your phone is off,
incoming calls go to voicemail.)
2. When your phone rings or vibrates, press and hold
the side speakerphone key (
) on the right side of
the phone or press and release the inside
speakerphone key (
in speakerphone mode.)
– or –
). (The call will be answered
Open the phone to use the earpiece.
32
Your Sprint PCS Phone notifies you of incoming calls in the
following ways:
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
The phone rings and vibrates.
The phone just vibrates.
The indicator light flashes.
The backlight illuminates.
The screen displays an incoming call message.
If the incoming call is from a number stored in your
Contacts, the entry’s name and number are displayed on
both the inside and outside LCD screens.
If Call Answer is set to Talk Key, the following options are
also displayed. To select an option, press the corresponding
softkey button.
ⅷ
Answer to answer the incoming call.
ⅷ
Ignore to send the call to your voicemail box.
Answering a Roam Call With Call Guard Enabled
Call Guard is an option that helps you manage your
roaming charges when making or receiving calls while
outside the Sprint Nationwide PCS Network. Please see
Section 2D: Controlling Your Roaming Experience for
more information about roaming.
To answer a call when you are roaming and Call Guard is
enabled:
ᮣ
Select Answer or press
press to confirm the roaming rate. (See “Call
to answer the call and
33
When your phone is off, incoming calls go directly to
voicemail.
Note:
Ending a Call
To disconnect a call when you are finished:
With the flip open:
ᮣ
Close the flip or press
With the flip closed:
Press and hold
.
ᮣ
.
Using the Speakerphone
The speakerphone allows you to hear audio through the
speaker and talk without holding your phone. When the
speakerphone is activated, use the volume keys to adjust
the sound level.
To turn the speakerphone on during a call:
ᮣ
Press and hold
or press
.
To turn the speakerphone off during a call:
ᮣ
Press and hold
or press
.
Due to higher volume levels, do not place the phone
near your ear during speakerphone use.
Warning!
34
Missed Call Notification
When an incoming call is not answered, the Missed Call log
is displayed on your screen.
To display the Missed Call entry from the notification screen:
ᮣ
Highlight the entry and press
number, press .)
To display a Missed Call entry from standby mode:
. (To dial the phone
1. Press
for Menu.
2. Select Call History (
).
).
3. Select Missed Calls (
4. Highlight the entry you wish to view and press
.
Calling Emergency Numbers
You can place calls to 911 (dial
), even if
your phone is locked or your account is restricted.
35
In-Call Options
Pressing Options ( ) during a call displays a list of features
you may use during the course of a call. To select an
option, press the corresponding keypad number or
highlight the option and press
. The following options
are available through the Options menu:
ⅷ
(1) Call History checks your call log for Outgoing,
Incoming, and Missed calls. You can also erase the
history from this menu.
ⅷ
ⅷ
(2) Contacts accesses the Contacts menu.
(3) 3-Way Call allows you to talk to two different people
at the same time. (For more information, see “Making a
ⅷ
ⅷ
(4) Messaging allows you to check for voicemail,
Sprint PCS Picture Mail, email, and notifications.
(5) Voice Memo allows you to record incoming audio
from your conversation. (For more information, see
ⅷ
ⅷ
(6) Tools accesses the Tools menu options.
(7) Phone Info displays the following menu:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
(1) Phone Number
(2) Icon Glossary
(3) Version
(4) Advanced
During a call, the left softkey button functions as the Mute
button. Press it to mute the phone’s microphone for privacy.
Press it again to Unmute the phone.
36
End-of-Call Options
After receiving a call from or making a call to a phone
number that is not in your Contacts, the phone number
and the duration of the call are displayed. The left softkey
displays the Save option. Select this option if you wish to
add the new number to your Contacts. (See “Saving a
After receiving a call from or making a call to a phone
number that is already in your Contacts, the Contacts entry
name and phone number and the duration of the call are
displayed. The left softkey displays the option Call. Select
this option if you wish to call the number again
.
The End-of-Call options are not displayed for calls
identified as No Caller ID or Restricted.
Note:
37
Saving a Phone Number
Your Sprint PCS Phone can store up to 300 Contact entries.
Each entry’s name can contain 20 characters. Your phone
automatically sorts the Contacts entries alphabetically. (For
more information, see “Using Contacts” on page 119.)
To save a number from standby mode:
1. Enter a phone number and press
2. Select Add New Entry or highlight an existing entry
from the Find screen and press
3. Use your navigation key to select a label (Mobile,
Home, Work, Pager, Fax, or Others) and press
4. Enter a name for the entry using the numeric keys.
Press to select the desired entry method
.
.
.
5. When finished entering the name, press
to
return to the contact entry.
6. Press
for Done to save the entry.
38
Finding a Phone Number
You can search Contacts entries for phone numbers that
end in a specific string of numbers.
To find a phone number:
1. While in standby mode, enter one or more of the last
digits of the phone number. (The more numbers you
enter, the more specific the search becomes.)
2. Press
for Options and select Find. (All Contacts
entries matching the entered numbers will display.)
3. To display the Contacts entry that ends in the
numbers you entered, highlight the entry and press
. To dial the number, highlight it and press
.
39
Dialing and Saving Phone Numbers
With Pauses
You can dial or save phone numbers with pauses for use
with automated systems, such as voicemail or credit card
billing numbers.
There are two types of pauses available on your phone:
ⅷ
Hard Pause sends the next set of numbers when you
press
.
ⅷ
2sec Pause automatically sends the next set of numbers
after two seconds.
You can have multiple pauses in a phone number and
combine 2-second and hard pauses.
Note:
To dial or save phone numbers with pauses:
1. Enter the phone number.
2. Select Options ( ) and choose either Hard Pause or
2sec Pause.
3. Enter additional numbers.
4. Press
– or –
Press
to save the number in your Contacts.
When dialing a number with a hard pause, press Talk to
send the next set of numbers.
Note
40
Abbreviated Dialing
Abbreviated dialing allows you to program a five or six-
digit prefix for commonly used phone numbers. When
abbreviated dialing is on, you can enter the last four or five
digits of any phone number that matches the five or six
digit prefix, and the number is dialed.
To set up abbreviated dialing:
1. Press
for Menu.
2. Select Settings (
).
3. Press
for Others.
4. Press
for Abbrev. Dial.
5. Press the navigation key up or down to select On or
Off and press
.
6. Input the five or six digit prefix and press
to
Save.
41
Making an Abbreviated Dial Call
To make a call:
1. Enter the last four or five digits of the prefix phone
number.
2. Abbrev. Dial is displayed in the lower left corner with
the prefix digits displayed.
If there is more than one Contact entry that matches the
last four or five digits, a list is displayed which allows you to
select the desired number to call.
Note
3. Press
to begin the call.
Dialing From Contacts
To dial directly from a Contacts entry:
1. Press
for Contacts.
2. Enter the first few letters of the Contact name using
the numeric keypad.
3. The matching contact is automatically highlighted.
4. Press
to make the call.
If the desired entry contains more than one phone number,
scroll left or right to display the icon for the number you
wish to call and press TALK to make the call.
Note
42
Using One-Touch/Two-Touch Speed Dialing
You can store up to ninety-nine numbers in your phone’s
speed dial memory to make contacting friends and family
as easy as pressing a button or two. With this feature, you
can dial Speed Dial entries using one key press for
locations 2-9 or two key presses for locations 10-99.
To use One-Touch Dialing for Speed Dial locations 2-9:
ᮣ
Press and hold the appropriate key for approximately
two seconds. The display confirms that the number
has been dialed when it shows the time and counter
above the name and number of the contact entry.
To use Two-Touch Dialing for Speed Dial locations 10-99:
1. Press the first digit.
2. Press and hold the second digit for approximately
two seconds. The display confirms that the number
has been dialed when it shows the time and counter
above the name and number of the contact entry.
Speed dialing is not available when you are roaming; when
you are roaming off the Sprint Nationwide PCS Network,
you must always dial using eleven digits (1 + area code +
number).
Note:
Speed dialing entries are assigned by pressing Menu, 9, 4.
Tip:
43
Using Plus (+) Code Dialing
When placing calls from the United States to other
countries, you can use Plus Code Dialing to automatically
enter the international access code (011).
To make a call using Plus Code Dialing:
1. Press and hold
until a “+” sign displays on your
phone.
2. Dial the country code and phone number you’re
calling and press . (The access code for
international dialing will automatically be dialed,
followed by the country code and the phone number
you entered.)
44
Entering Text
Selecting a Character Input Mode
Your Sprint PCS Phone provides convenient ways to enter
words, letters, punctuation, and numbers whenever you
are prompted to enter text (for example, when adding a
Contact entry or when using Sprint PCS Mail and
SMS Text Messaging).
To change the character input mode:
1. When you are prompted to enter text, press
to
change the character input mode.
2. Select one of the following options:
Ⅲ
T9 (English) to enter characters using predictive T9
Ⅲ
Alpha to enter characters by tapping the keypad
Ⅲ
Ⅲ
Number to enter numbers by pressing the
Preset Msg to enter pre-programmed messages
Recent Msg to select text from a list of recent
messages (see page 49).
Ⅲ
Ⅲ
Ⅲ
When entering text, press the * (Shift) key to change letter
capitalization (ABC > abc > Abc).
Tip:
45
Entering Characters Using T9 Text Input
T9 Text Input lets you enter text in your Sprint PCS Vision
Phone by pressing keys just once per letter. (To select the
T9 [English] mode when entering text, see “Selecting a
T9 Text Input analyzes the letters you enter using an
intuitive word database and creates a suitable word. (The
word may change as you type.) If the word you want does
not display after you have entered all the letters, press
to scroll through additional word selections. To accept a
word and insert a space, press
.
If you make a mistake, press
character. Press and hold
to erase a single
to delete an entire entry.
To enter text using T9:
1. From the text entry screen (for example, a new event
in scheduler), press and select T9(English).
2. Use your keypad to enter the new event. (For
example, to enter “Meeting”, press once,
twice, once, once, once, and
once.)
46
Entering Characters by Tapping the Keypad
To enter characters by tapping the keypad:
2. Press the corresponding keys repeatedly until the
desired letter appears (for example, to enter the word
“Bill,” press
times, press
twice,
three times,
three
to advance the cursor or wait for it
to advance automatically, then press
again). (If you make a mistake, press
single character. Press and hold
text.)
three times
to erase a
to erase all
By default, the first letter of an entry is capitalized and the
following letters are lowercase. After a character is
entered, the cursor automatically advances to the next
space after two seconds or when you enter a character on
a different key.
47
Characters scroll in the following order:
. ,@ 1 ?! * # /
A B C 2
D E F 3
G H I 4
J K L 5
M N O 6
P Q R S 7
T U V 8
W X Y Z 9
0
Space
Shift
Entering Numbers, Symbols, Emoticons, Preset
Messages and Recent Messages
To enter numbers:
ᮣ
Select the Number mode and press the appropriate
To enter symbols:
ᮣ
Input Mode” on page 45.) To enter a symbol, press
the appropriate key indicated on the display.
48
To enter emoticons:
Select the Emoticons mode and press the appropriate
ᮣ
key. You may scroll through more options by pressing
the navigation key left or right. (See “Selecting a
To enter preset messages:
2. Scroll to the desired pre-programmed message and
press
.
Preset messages make composing text messages even
easier by allowing you to enter common messages, such as
Meet me at, Let’s get lunch, or a customized preset
message of your own. (For more information on Preset
messages, please see “Managing Preset Messages” on
Note:
To enter recent messages:
2. Scroll to the desired message and press
.
49
Section 2B
Controlling Your Phone’s Settings
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Using the menu options available on your Sprint PCS Phone, you
can customize your phone to sound, look, and operate just the
way you want it to. This section describes how you can
change your phone’s settings to best suit your needs. Take
a few moments to review these options and to adjust or
add settings that are right for you.
51
Sound Settings
Ringer Types
Ringer types help you identify incoming calls and
messages. You can assign ringer types to individual contact
entries, types of calls, Scheduler entries, and types of
messages.
ⅷ
Single Tones are non-polyphonic traditional style ring
tones.
ⅷ
ⅷ
ⅷ
Ring Tones include a variety of standard ringer types.
Melodies include a variety of standard musical melodies.
Downloaded includes ringers you have purchased and
downloaded to your phone. (See “Downloading
52
Selecting Ringer Types for Voice Calls
Your Sprint PCS Phone provides a variety of ringer options
that allow you to customize your ring and volume settings.
These options allow you to identify incoming calls by the
ring.
To select a ringer type for voice calls:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
).
3. Select Sounds (
4. Select Ringer Type (
).
).
5. Select Voice Calls (
6. Select With Caller ID (
) or No Caller ID (
).
7. Press the navigation key left or right to select the
desired ringer category.
8. Press the navigation key down to highlight the Ringer
field. Press the navigation key left or right to scroll
through the available ringers. (A sample ringer will
sound as you highlight each option.)
9. When the desired ringer is selected, press
.
53
Selecting Ringer Types for Messages
To select a ringer type for messages:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
).
3. Select Sounds (
4. Select Ringer Type (
5. Select Messages (
).
).
), Text Message (
6. Select Voicemail (
), or
Picture Mail (
).
7. Press the navigation key left or right to select the
desired ringer category.
8. Press the navigation key down to highlight the Ringer
field. Press the navigation key left or right to scroll
through the available ringers. (A sample ringer will
sound as you highlight each option.)
9. When the desired ringer is selected, press
.
54
Selecting Ringer Types for Schedule
To select a ringer type for schedule reminders:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
).
3. Select Sounds (
4. Select Ringer Type (
).
5. Select Schedule (
).
6. Press the navigation key left or right to select the
desired ringer category.
7. Press the navigation key down to highlight the Ringer
field. Press the navigation key left or right to scroll
through the available ringers. (A sample ringer will
sound as you highlight each option.)
8. When the desired ringer is selected, press
.
Selecting a Roam Ringer
To select a ringer type for roaming calls:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
).
3. Select Sounds (
4. Select Ringer Type (
).
).
6. Press the navigation key up or down to select Normal
or Distinctive and press
5. Select Roam Ringer (
.
55
Selecting a Key Tone
Your phone offers a number of options for selecting the
type and length of audible tones accompanying a key
press. (Longer tone lengths may be better for tone
recognition when dialing voicemail or other automated
systems.)
To select a tone type:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
3. Select Sounds (
4. Select Key Tone (
).
).
).
).
5. Select Tone Type (
6. Select Normal, Piano, or Beep and press
.
To select a tone level:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
).
).
3. Select Sounds (
4. Select Key Tone (
5. Select Tone Level (
).
6. Press the volume key up or down to select the
desired level and press
.
56
To select a key tone length:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
).
3. Select Sounds (
4. Select Tone Length (
).
5. Select Short or Long and press
.
Adjusting the Phone’s Volume Settings
You can adjust your phone’s volume settings to suit your
needs and your environment.
To adjust your phone’s volume settings:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
3. Select Sounds (
4. Select Volume (
).
).
).
5. Select Calls (
), Text Message (
), or Picture Mail
(
), Voice Mail (
), Alarms (
), or
App. Volume (
).
6. Select Use Ringer Vol. or Separate Vol. Press the
navigation key left or right to choose a desired
volume level and press
. Highlight Always Vibrate
and press
mode.
to set your handset to vibrate + ringer
With the phone open, you can adjust the ringer volume in
standby mode (or the earpiece volume during a call) by
using the volume key on the left side of your phone.
Tip:
57
Alert Notification
Your Sprint PCS Phone can alert you with an audible tone
when you change service areas, once a minute during a
voice call, or when a call has been connected.
To enable or disable alert sounds:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
3. Select Sounds (
4. Select Alerts (
).
).
).
5. Select Minute Beep (
), Sig. Fade Tone (
), Service (
), Connect
(
), or Power On/Off (
).
6. Select On or Off and press
.
Silence All
There may be times when you need to silence your phone
entirely. The phone’s Silence All option allows you to mute
all sounds without turning your phone off.
To activate Silence All:
ᮣ
With the phone open, press and hold the volume key
down in standby mode. (The screen will display
“Silence All.”)
To deactivate Silence All:
ᮣ
Press the volume key up repeatedly to select a desired
volume level.
58
Display Settings
Changing the Text Greeting
The text greeting can be up to fourteen characters and is
displayed on your phone’s screen in standby mode. You
may choose to keep the phone’s default greeting
(“Sprint PCS”), or you may enter your own custom
greeting.
To display or change your greeting:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
).
).
3. Select Display (
4. Select Greeting (
5. Select Custom and press
.
6. Enter a custom greeting using your keypad and press
existing greeting one character at a time, press
To erase the entire greeting, press and
.
hold
.)
59
Changing the Backlight Time Length
The backlight setting lets you select how long the display
screen and keypad are lit after any key press is made.
To change the backlight setting:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
3. Select Display (
4. Select Backlight (
).
).
).
5. Select Main Display (
), Keypad (
), or
Pwr Save Mode (
).
6. Select a time setting or on/off and press
.
Long backlight settings affect the battery’s talk and standby
times.
Note:
60
Changing the Screen Saver
Your new Sprint PCS Phone offers options for what you
see on the display screen while in standby mode.
To change the display images:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
).
3. Select Display (
4. Select Screen Saver (
).
5. Select Preset Image (
), Downloads (
), or
My Pictures (
).
6. Use the navigation key to view the available screen
savers.
If Preset Image is selected, there may also be an additional
step required to place a digital clock as an overlay. The
clock can also be turned off so that just the desired image
is displayed as the screen saver.
Note:
7. Press
to select the desired screen saver.
61
Dialing Font
Your Sprint PCS Phone allows you to choose the color and
size of the text displayed when dialing.
Color
The available color options are:
ⅷ
Basic: displays black numbers on-screen when dialing.
ⅷ
Rainbow: displays multi-colored numbers on-screen
when dialing.
ⅷ
ⅷ
Monochrome: allows you to choose between several
different monochromatic color options.
Hyphenate: allows you to choose between several
different monochromatic colors and assign a different
color option to each individual hyphenated series of
numbers.
To change the dialing color:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
).
3. Select Display (
4. Select Dialing Font (
).
5. Select Color (
).
6. Select Basic, Rainbow, Monochrome, or Hyphenate and
press
.
62
7. If you selected Monochrome, use your navigation key
to select a color. If you selected Hyphenate, use your
navigation key to select a color for the first group of
numbers, then press Next ( ) and select a color for
the next two sets of numbers.
8. Select Done ( ).
Font Size
The available size options are:
ⅷ
Large: displays larger text for easier viewing on the
display screen.
ⅷ
Normal: displays the standard smaller size text on the
display screen.
To change the dialing font size:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
).
3. Select Display (
4. Select Dialing Font (
).
5. Select Size (
6. Press the navigation key up or down to select Large or
Normal and press
).
.
63
Location Settings
Your Sprint PCS Phone is equipped with a Location feature
for use in connection with location-based services that may
be available in the future.
The Location feature allows the network to detect your
position. Turning Location off will hide your location from
everyone except 911.
To enable your phone’s Location feature:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select Others (
).
4. Select Location (
). (The Location disclaimer
displays.)
5. Read the disclaimer and press
6. Select On or Off and press
When the Location feature is on, your phone’s standby
or select
(Next).
.
screen will display the
icon. When Location is turned
off, the icon will display.
64
Messaging Settings
Staying connected to your friends and family has never
been easier. With your phone’s advanced messaging
capabilities, you can send and receive many different kinds
of text messages without placing a voice call. (For more
Your phone’s messaging settings make text messaging
even faster and easier by letting you decide how you
would like to be notified of new messages, create a
signature with each sent message, and create your own
canned messages, to name just a few.
Setting Message Alerts
When new messages arrive, you can choose to have your
phone notify you by playing an audible alert.
To hear an alert when you receive a new message:
1. Press Menu ( ) to access the main menu.
2. Select Messaging (
).
3. Select Settings (
).
4. Select Message Alerts (
).
5. Select Ringer Type (
).
6. Select Voicemail (
Picture Mail ( ).
), Text Message (
), or
7. Select Single Tones, Ring Tones, Melodies, or
Downloaded and press the navigation key down.
8. Press the navigation key left or right to select the
desired sound and press
.
65
Deleting Old Messages
You can have old messages deleted automatically when
your inbox becomes full.
1. Press Menu ( ) to access the main menu.
2. Select Messaging (
).
3. Select Settings (
).
4. Select Auto Erase (
).
5. Select Yes or No and press
.
Adding a Customized Signature
Each message you send can have a customized signature to
reflect your personality.
To add a customized signature to each sent message:
1. Press Menu ( ) to access the main menu.
2. Select Messaging (
).
3. Select Settings (
).
4. Select Edit Signature (
).
5. Select On and press
.
If you do not wish to attach a signature to your outgoing
messages, select Off.
Note:
6. Enter your signature using the keypad and press
66
Managing Preset Messages
Your phone is preset with ten messages and ten empty
spaces for custom messages to help make sending text
messages faster and easier. These messages, such as “Where
are you?,” “Let’s get lunch,” and “Meet me at,” can be
customized or deleted to suit your needs. You can even add
your own preset messages to the list.
To edit or delete a preset message:
1. Press Menu ( ) to access the main menu.
2. Select Messaging (
).
3. Select Settings (
).
4. Select Preset Messages (
). (The list of messages
is displayed.)
5. To edit or delete a preset message, highlight it and
press Edit ( ).
To add a new preset message:
1. Press Menu ( ) to access the main menu.
2. Select Messaging (
).
3. Select Settings (
).
4. Select Preset Messages (
). (The list of messages
is displayed.)
5. Press Options ( ) and select Add New (
).
67
will be added to the beginning of the list.)
Airplane Mode
Airplane Mode allows you to use many of your phone’s
features, such as Games, Memo Pad, Voice Memos, etc.,
when you are in an airplane or in any other area where
making or receiving calls or data is prohibited. When your
phone is in Airplane Mode, it cannot send or receive any
calls or access online information.
To set your phone to Airplane Mode:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select Airplane Mode (
).
4. Read the disclaimer and press
or select Next ( ).
5. Select On or Off and press OK ( ).
While in Airplane Mode, your phone’s standby screen will
display “Phone Off.”
68
TTY Use With Sprint PCS Service
A TTY (also known as a TDD or Text Telephone) is a
telecommunications device that allows people who are
deaf, hard of hearing, or who have speech or language
disabilities, to communicate by telephone.
Your phone is compatible with select TTY devices. Please
check with the manufacturer of your TTY device to ensure
that it supports digital wireless transmission. Your phone
and TTY device will connect via a special cable that plugs
into your phone's headset jack. If this cable was not
provided with your TTY device, contact your TTY device
manufacturer to purchase the connector cable.
When establishing your Sprint PCS Service, please call
Sprint Customer Service via the state Telecommunications
Relay Service (TRS) by first dialing
,
.
Then provide the state TRS with this number: 866-727-
4889.
To turn TTY Mode on or off:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select Others (
).
4. Select TTY (
).
A message is displayed when you enable TTY that says
“Enabling TTY may impair headset use and non-TTY
accessory performance” press the left softkey to continue.
Note:
69
5. Press
after reading the message to continue.
6. Press the navigation key up or down to select
TTY Disable, TTY Full, TTY+Hearing, or TTY+Voice and
press
.
In TTY Mode, your phone will display the TTY access icon.
Note:
If TTY mode is enabled, the audio quality of non-TTY
devices connected to the headset jack may be impaired.
911 Emergency Calling
IMPORTANT
NOTICE:
Sprint recommends that TTY users make
emergency calls by other means, including
Telecommunications Relay Services (TRS), analog
cellular, and land line communications. Wireless
TTY calls to 911 may be corrupted when received
by public safety answering points (PSAPs)
rendering some communications unintelligible. The
problem encountered appears related to TTY
equipment or software used by PSAPs. This matter
has been brought to the attention of the FCC, and
the wireless industry and PSAP community are
currently working to resolve this.
70
Update Phone SW
The Update Phone Software feature allows you to
automatically receive available software updates via the
Sprint PCS Vision network when they become available.
To download available updates:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select Others (
).
4. Select Update Phone SW (
).
71
Phone Setup Options
Launch Pad
Your phone offers you the option of assigning a shortcut
key to a favorite or often-used function. Pressing one of the
navigation keys in standby mode will launch your
personally designated shortcut.
To assign your shortcut key:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select Launch Pad (
).
4. Select the Up, Down, Left or Right key, and press
.
5. Using the navigation key to select the desired
shortcut you would like to assign and
press
.
72
Call Answer Mode
You can determine how to answer incoming calls on your
phone, whether you want to be required to press
press any number key, or simply open the flip.
, to
To set call answer mode:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select Others (
).
4. Select Call Answer (
).
5. To select an option, highlight it and press
.
Ⅲ
Any Key to allow an incoming call to be answered
by pressing any key.
Ⅲ
Ⅲ
Talk Key requires
incoming calls.
to be pressed to answer all
Flip Open allows you to answer incoming calls by
opening the flip.
Auto Answer Mode
You may set your phone to automatically pick up incoming
calls when connected to an optional hands-free car kit or
headset.
To set Auto Answer mode:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
73
3. Select Others (
4. Select Auto Answer (
5. To select an option, highlight it and press
).
).
.
Ⅲ
No to disable Auto Answer.
Ⅲ
Yes to answer calls automatically when the phone
is connected to a hands-free car kit or a headset
(sold separately). Remember, your phone will
answer calls in Auto Answer mode even if you are
not present.
Display Language
You can choose to display your Sprint PCS Phone’s on-
screen menus in English or in Spanish.
To assign a language for the phone’s display:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select Others (
).
4. Select Language (
).
5. Select English or Español and press
.
74
Section 2C
Setting Your Phone’s Security
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Erasing Pictures
ࡗ Security Features for Sprint PCS VisionSM
By using the security settings on your Sprint PCS Phone, you
receive peace of mind without sacrificing flexibility. This
section will familiarize you with your phone’s security
settings. With several options available, you can customize
your phone to meet your personal needs.
75
Accessing the Security Menu
All of your phone’s security settings are available through
the Security menu. You must enter your lock code to view
the Security menu.
To access the Security menu:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
).
3. Select Security (
4. Enter your lock code to display the Security menu.
If you can’t recall your lock code, try using the last four
digits of either your Social Security number or Sprint PCS
Phone number or try 0000 or NATL(6285). If none of these
work, call Sprint Customer Service at 1-888-211-4PCS
(4727).
Tip:
Using Your Phone’s Lock Feature
Locking Your Phone
When your phone is locked, you can only receive
incoming calls or make calls to 911, Sprint Customer
Service, or special numbers. (See “Using Special Numbers”
To lock your phone:
1. From the Security menu, select Lock Phone (
2. Highlight Unlocked, On Power-Up, or Lock Now and
press
).
.
76
Unlocking Your Phone
To unlock your phone:
1. From standby mode, press
.
2. Enter your lock code.
Changing the Lock Code
To change your lock code:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
).
3. Select Security (
4. Enter your lock code. (The Security menu is
displayed.)
5. Select Change Lock (
).
6. Enter your new lock code and press Next ( ).
7. Re-enter your new lock code press Save ( ).
Calling in Lock Mode
You can place calls to 911 and to your special numbers
when in lock mode. (For information on special numbers,
To place an outgoing call in lock mode:
ᮣ
To call an emergency number, special number, or
Sprint Customer Service, enter the phone number
and press
.
77
Locking the Camera
When your pictures are locked you are unable to access
the camera to take pictures without first entering a
password. You are required to enter a password prior to
accessing the Pictures menu.
Locking the Pictures Menu
To lock your pictures menu:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select Security (
) and enter your lock code.
).
4. Select Lock Pictures (
5. Select On/Off and press
.
Accessing the Pictures Menu in Lock Mode
To access the pictures menu:
1. Press Menu ( ) to access the main menu.
2. Select Pictures (
).
3. Enter your lock code. (The Pictures menu is
displayed.)
78
Locking Services
This setting allows you to lock voice call functions and
Sprint PCS Vision services. When you enable Lock
Services, you are unable to make new calls (excluding
emergency numbers) or access the Sprint PCS Vision
services until the lock has been disabled in the Security
menu.
Locking Voice Services
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select Security (
) and enter your lock code.
).
4. Select Lock Services (
5. Select Voice: Unlocked (
).
6. Select Lock and press
.
Locking Sprint PCS Vision
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select Security (
) and enter your lock code.
).
4. Select Lock Services (
5. Select PCS Vision: Unlocked (
6. Select Lock and press
).
.
79
Using Special Numbers
Special numbers are important numbers that you have
designated as being “always available.” You can call and
receive calls from special numbers even if your phone is
locked.
You can save up to three special numbers in addition to
your contact entries (the same number may be in both
directories).
To add or replace a special number:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select Security (
) and enter your lock code.
4. Select Special # (
).
5. Highlight the desired location for your entry and
press
6. Enter the number and press
.
.
There are no Speed Dial options associated with special
numbers.
Note:
80
Erasing Contacts
You can quickly and easily erase all of your Contacts.
To erase all the names and phone numbers in your
Contacts:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
3. Select Security (
4. Select Erase (
).
) and enter your lock code.
).
5. Select Erase Contacts (
).
6. If you are certain you would like to erase all of your
internal Contacts entries, select Yes and press
.
81
Erasing Downloads
You can use your phone’s security menu to erase all items
you have downloaded to your phone.
To erase all downloads:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
3. Select Security (
4. Select Erase (
).
) and enter your lock code.
).
5. Select Erase Downloads (
).
6. If you are certain that you would like to erase all
items downloaded to your phone, select Yes and
press
.
This will also delete any content originally preloaded into
the handset.
Note:
82
Erasing Pictures
You can use your phone’s security menu to erase all
pictures saved to your phone.
To erase all pictures:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
3. Select Security (
4. Select Erase (
).
) and enter your lock code.
).
5. Select Erase Pictures (
).
6. If you are certain that you would like to erase all
pictures saved in your phone, select Yes and
press
.
83
Resetting Your Phone
Resetting the phone restores all the factory defaults,
including the ringer types and display settings. (Contacts
are not erased.)
To reset your phone:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
3. Select Security (
4. Select Reset Phone (
).
) and enter your lock code.
).
5. If you are certain that you would like to restore all of
the factory settings, select Yes and press
.
Reset Picture Account
It is sometimes necessary to clear the token associated
with the Picture account in Sprint PCS Vision. This will
reset your account.
To reset your picture account:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select Security (
) and enter your lock code.
4. Select Reset Picture Account (
5. If you are certain that you would like to reset your
Picture account, select Yes and press
).
.
84
Security Features for Sprint PCS VisionSM
Enabling and Disabling Sprint PCS Vision
Services
You can disable Sprint PCS Vision services without turning
off your phone; however, you will not have access to any
Sprint PCS Vision services, including Web and messaging.
Disabling Sprint PCS Vision will avoid any charges
associated with Sprint PCS Vision services. While signed
out, you can still place or receive phone calls, check
voicemail, and use other voice services. You may enable
Sprint PCS Vision services again at any time.
To disable Sprint PCS Vision services:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select PCS Vision (
).
4. Select Disable Vision (
). (A message will appear.)
5. Read the disclaimer and press Next ( ).
6. Select Disable Vision and press
.
85
Section 2D
Controlling Your Roaming Experience
In This Section
ࡗ ࡗ ࡗ Understanding Roaming
Setting Your Phone’s Roam Mode
Controlling Roaming Charges Using Call Guard
Roaming is the ability to make or receive calls when you’re off
the Sprint Nationwide PCS Network. Your new Sprint PCS
VisionSM Picture Phone PM-A840 by Samsung works
anywhere on the Sprint Nationwide PCS Network and
allows you to roam on other 1900 and 800 MHz digital
networks where we've implemented roaming agreements with
other carriers.
This section explains how roaming works as well as special
features that let you manage your roaming experience.
87
Understanding Roaming
Recognizing the Roaming Icon on the Display Screen
Your phone’s display screen always lets you know when
you’re off the Sprint Nationwide PCS Network. Any time
you are roaming, the phone displays the roaming
icon (
).
Remember, when you are using your phone off the Sprint
Nationwide PCS Network, always dial numbers using 11
digits (1 + area code + number).
Tip:
Unless your Sprint PCS Service Plan includes roaming, you
will pay a higher per-minute rate for roaming calls.
Note:
Roaming on Other Digital Networks
When you’re roaming on digital networks, your call quality
and security will be similar to the quality you receive when
making calls on the Sprint Nationwide PCS Network.
However, you may not be able to access certain features,
such as Sprint PCS Vision.
If you’re on a call when you leave the Sprint Nationwide
PCS Network and enter an area where roaming is
available, your call is dropped. If your call is dropped in an
area where you think Sprint PCS Service is available, turn
your phone off and on again to reconnect to the Sprint
Nationwide PCS Network.
Note:
88
Checking for Voicemail Messages While Roaming
When you are roaming off the Sprint Nationwide PCS
Network, you may not receive on-phone notification of
new voicemail messages. Callers can still leave messages,
but you will need to periodically check your voicemail for
new messages if you are in a roaming service area for an
extended period of time.
To check your voicemail while roaming:
1. Dial 1+area code+your Sprint PCS Phone number.
2. When you hear your voicemail greeting, press
.
3. Enter your pass code at the prompt and follow the
voice prompts.
When you return to the Sprint Nationwide PCS Network,
voicemail notification will resume as normal.
89
Setting Your Phone’s Roam Mode
Your Sprint PCS Phone allows you to control your roaming
capabilities. By using the Roaming menu option, you can
determine which signals your phone accepts.
Set Mode
Choose from three different settings on your dual-band
phone to control your roaming experience.
To set your phone’s roam mode:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select Others (
).
4. Select Roaming (
).
).
5. Select Set Mode (
6. To select an option, highlight it and press
.
Ⅲ
Ⅲ
Ⅲ
Automatic seeks Sprint PCS Service. When Sprint PCS
Service is unavailable, the phone searches for an
alternate system.
Roaming Only forces the phone to seek a roaming
system. The previous setting (Sprint or Automatic)
is restored the next time the phone is turned on.
Sprint allows you to access the enhanced
Sprint Nationwide PCS Network only and prevents
roaming on other networks.
90
Controlling Roaming Charges Using
Call Guard
Your phone has two ways of alerting you when you are
roaming off the Sprint Nationwide PCS Network: the on-
screen roaming icon and Call Guard. Call Guard makes it
easy to manage your roaming charges by requiring an extra
step before you can place or answer a roaming call. (This
additional step is not required when you make or receive
calls while on the Sprint Nationwide PCS Network.)
To turn Call Guard on or off:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select Others (
).
4. Select Roaming (
).
5. Select Call Guard (
).
6. Highlight On or Off and press
.
Voice Dialing and Speed Dialing are not available when you
are roaming with Call Guard enabled.
Note:
91
To place roaming calls with Call Guard on:
1. From standby mode, dial 1 + area code + the seven-
digit number and press
.
2. Press to confirm Roaming Rate.
To answer incoming roaming calls with Call Guard on:
1. Press
2. Press
to confirm Roaming Rate.
If the Call Guard feature is set to On, you need to
take extra steps to make and receive roaming calls.
Reminder:
92
Section 2E
Navigating Through Menus
In This Section
ࡗ ࡗ ࡗ Every function and feature of your Sprint PCS Phone can be
accessed through an on-screen menu. This section is a road
map to using your Sprint PCS VisionSM Picture Phone
PM-A840 by Samsung. Please take a few moments to learn
your way around and you’ll find your phone easier to use.
93
Menu Navigation
The navigation key on your Sprint PCS Phone allows you to
scroll through menus quickly and easily. The scroll bar at
the right of the menu keeps track of your position in the
menu at all times.
To navigate through a menu, simply press the navigation
key up or down. If you are in a first-level menu, such as
Settings, you may also navigate to the next or previous first-
level menu by pressing the navigation key right or left.
Menu Structure
Selecting Menu Items
As you navigate through the menu, menu options are
highlighted. Select any numbered option by simply
pressing the corresponding number on the phone’s
keypad. You may also select any item by highlighting it and
pressing
.
For example, if you want to view your last incoming call:
1. Press Menu ( ) to access the main menu.
2. Select Call History by pressing
it and pressing
or by highlighting
.
3. Select Incoming Calls by pressing
or by
highlighting it and pressing
. (If you have
received any calls, they are displayed on the screen.)
94
Backing Up Within a Menu
To go to the previous menu:
ᮣ
Press
.
To return to standby mode:
ᮣ
Press
.
Viewing the Menus
Menu Diagram
Voice Memo
1: Record
2: Review
3: Erase All (Yes/No)
Messaging
1: Send Message
1: Text Message
2: Picture Mail
1: In Camera
2: New Picture
3: VoiceSMS
4: Hand. Msg
2: Text Message
1: Inbox
2: Outbox
3: Drafts
4: Send Text
3: Picture Mail
1: Inbox
2: Send Picture
4: VoiceSMS
5: Email
6: Instant Message
95
7: Voicemail
1: Call Voicemail
2: Details
3: Clear Envelope
8: Settings
1: Notification
1: Message and Icon
2: Icon only
2: Sending Options
1: Priority
1: Normal
2: Urgent
2: Call Back #
1: None
2: Phone Number (xxx-xxx-xxxx)
3: Other
3: Preset Messages
1: Can’t talk right now. Send me a message.
2: Call me
3: Where are you?
4: Can you pick up
5: Meet me at
6: Let’s get lunch.
7: The meeting has been cancelled.
8: I’ll be there at
9: What time does it start?
10: I love you!
11: [Empty]
12: [Empty]
13: [Empty]
14: [Empty]
15: [Empty]
16: [Empty]
17: [Empty]
18: [Empty]
96
19: [Empty]
20: [Empty]
4: Edit Signature (On/Off)
5: Message Alerts
1: Ringer Volume
1: Text Message
2: Picture Mail
3: Voice Mail
2: Ringer Type
1: Voicemail
2: Text Message
3: Picture Mail
3: Reminder
1: Off
2: Once
3: Every 2 min
6: Save in Outbox (Yes/No)
7: Auto Erase (Yes/No)
8: VoiceSMS Options
1: Speaker Phone (On/Off)
2: From Name
Tools
1: Today
2: Scheduler
3: World Time
1: DST Setting
4: Alarm Clock
1: Alarm #1
2: Alarm #2
3: Alarm #3
5: Task List
6: Memo Pad
7: Calculator
8: Countdown
9: Set Time (displayed when there is no time information.)
97
Pictures
1: Camera
Press
to view the following options:
1: Self Timer
1: Off
2: 5 Sec
3: 10 Sec
2: Fun Tools
1: Fun Frames
1: Off
2: Love Letter
3: Merry christmas
4: Movie star
5: Top secret
6: Dollar
7: Memories
8: Robinhood
9: Roses for Love
10: Love
11: Stars
12: Beans
2: Color Tones
1: Auto
2: Sepia
3: Mono
4: Warm
5: Cool
3: Controls
1: Brightness
2: White Balance
1: Auto
2: Sunny
3: Cloudy
4: Tungsten
5: Fluorescent
98
6: Manual
4: Settings
1: Resolution
1: High: 640x480
2: Med: 320x240
3: Low: 160x120
2: Quality
1: Fine
2: Normal
3: Economy
3: Shutter Sound
1: Shutter 1-6
2: Say Cheese
3: Off
4: Auto Erase (On/Off)
5: Review Pictures
2: My Pictures
1: In Camera
2: Saved to Phone
3: Online Albums
1: View Albums
2: Upload Picture
4: Order Prints
1: Prints@Retail
2: Print by Mail
5: Account Info
6: Cam. Key Guard (On/Off)
99
Call History
1: Missed Calls
2: Outgoing Calls
3: Incoming Calls
4: Erase History
1: Missed Calls
2: Outgoing Calls
3: Incoming Calls
4: All Calls
Web
Settings
1: Display
1: Screen Saver
1: Preset Image
1: Train
2: Balloon
3: Candy
4: Beach
5: Dog
6: Calendar
7: World Time
8: Analog Clock
9: Dual Clock
10: Video
11: Motorcycle
12: Launch Pad
2: Downloads
3: My Pictures
1: In Camera
2: Saved to Phone
2: Slide Show
1: In Camera
2: Saved to Phone
3: Menu Style
1: 3x3 Style
100
2: List Style
4: Incoming Call
1: With Caller ID
1: Preset Animation
2: Downloads
3: My Pictures
2: No Caller ID
1: Preset Animation
2: Downloads
3: My Pictures
5: Dialing Font
1: Color
1: Basic
2: Rainbow
3: Monochrome
4: Hyphenate
2: Size
1: Large
2: Normal
6: Greeting
1: Sprint PCS
2: Custom
7: Backlight
1: Main Display
1: Flip open
2: 30 seconds
3: 15 seconds
4: 8 seconds
2: Keypad
1: Flip open
2: 30 seconds
3: 15 seconds
4: 8 seconds
5: Off
3: Pwr Save Mode (On/Off)
101
8: LCD Contrast
1: Main LCD
1: Lowest
2: Low
3: Med
4: High
5: Highest
2: External LCD
1: Lowest
2: Low
3: Med
4: High
5: Highest
9: Service Light (On/Off)
2: Sounds
1: Volume
1: Calls
2: Text Message
3: Picture Mail
4: Voice Mail
5: Alarms
6: App. Volume
2: Ringer Type
1: Voice Calls
1: With Caller ID
2: No Caller ID
2: Messages
1: Voicemail
2: Text Message
3: Picture Mail
3: Schedule
4: Roam Ringer
1: Normal
2: Distinctive
3: Alerts
102
1: Minute Beep (On/Off)
2: Service (On/Off)
3: Connect (On/Off)
4: Sig. Fade Tone (On/Off)
5: Power On/Off (On/Off)
4: Key Tone
1: Tone Type
1: Normal
2: Piano
3: Beep
2: Tone Level
1: Off
2: Level 1-8
5: Tone Length
1: Short
2: Long
6: Audio Routing
1: Normal
2: Headset only
3: PCS Vision
1: Enable/Disable Vision
2: Net Guard (On/Off)
3: Update PCS Vision Profile
4: Voice Service
1: Launch VSuite
2: Settings
1: Digit Dialing
1: Adapt Digits
2: Reset Digits
2: Sensitivity
1: Commands
1: Reject More
2: Recommended
3: Reject Less
2: Names
103
1: Reject More
2: Recommended
3: Reject Less
3: Choice Lists
1: Name Dialing
1: Automatic
2: Always On
3: Always Off
2: Digit Dialing
1: Automatic
2: Always On
3: Always Off
3: Contacts
1: Automatic
2: Always On
3: Always Off
4: Sound
1: Prompts (On/Off)
2: Digits (On/Off)
3: Names (On/Off)
4: Name Settings
1: Speed
1: Faster
2: Recommended
3: Slower
2: Volume
1: Louder
2: Recommended
3: Softer
5: Voice Launch
1: Talk Only
2: Talk and Flip
6: About
5: Security
1: Lock Phone
104
1: Unlocked
2: On Power-Up
3: Lock Now
2: Lock Pictures (On/Off)
3: Change Lock
4: Special #
1: Empty
2: Empty
3: Empty
5: Lock Services
1: Voice: Lock/Unlock
2: PCS Vision: Lock/Unlock
6: Erase
1: Erase Contacts (Yes/No)
2: Erase Downloads (Yes/No)
3: Erase Pictures (Yes/No)
7: Reset Phone (Yes/No)
8: Reset Picture Account (Yes/No)
6: Airplane Mode (On/Off)
7: Launch Pad
1: Up Key
1: Contacts
2: Voice Memo
3: Scheduler
4: Messaging
5: Voice Service
6: Ringer Type
7: Downloads
8: Display
9: Alarms
10: Calculator
11: Web
12: Inbox
13: VoiceSMS Inbox
14: Send Text
105
15: Send VoiceSMS
16: Missed Events
2: Down Key
1: Contacts
2: Voice Memo
3: Scheduler
4: Messaging
5: Voice Service
6: Ringer Type
7: Downloads
8: Display
9: Alarms
10: Calculator
11: Web
12: Inbox
13: VoiceSMS Inbox
14: Send Text
15: Send VoiceSMS
16: Missed Events
3: Left Key
1: Contacts
2: Voice Memo
3: Scheduler
4: Messaging
5: Voice Service
6: Ringer Type
7: Downloads
8: Display
9: Alarms
10: Calculator
11: Web
12: Inbox
13: VoiceSMS Inbox
14: Send Text
15: Send VoiceSMS
106
16: Missed Events
4: Right Key
1: Contacts
2: Voice Memo
3: Scheduler
4: Messaging
5: Voice Service
6: Ringer Type
7: Downloads
8: Display
9: Alarms
10: Calculator
11: Web
12: Inbox
13: VoiceSMS Inbox
14: Send Text
15: Send VoiceSMS
16: Missed Events
8: Others
1: Abbrev. Dial (On/Off)
2: Contacts Match (On/Off)
3: Restriction
1: Outgoing Call
1: Allow all
2: Contacts only
3: Special# Only
4: Call Answer
1: Any Key
2: Talk Key
3: Flip Open
5: Auto Answer (Car Kit/Headset) (Yes/No)
6: Language
1: English
2: Español
7: Roaming
107
1: Set Mode
1: Automatic
2: Roaming Only
3: Sprint
2: Call Guard (On/Off)
8: Location (On/Off)
9: TTY
1: TTY Disable
2: TTY Full
3: TTY+Hearing
4: TTY+Voice
10: Update Phone SW
9: Phone Info
1: Phone Number
2: Icon Glossary
3: Version
4: Advanced
Downloads
1: Games
1: Get New Games
2: My Content Manager Games
3: Tetris Demo
4: JAMDAT Bowling2 Demo
5: Ms. PAC-MAN DEMO
2: Ringers
1: Get New Ringers
2: My Content Manager Ringers
3: Ringers Preview
3: Screen Savers
1: Get New Screen Savers
2: My Content Manager Screen Savers
3: Screen Saver Preview
4: Applications
1: Get New Applications
2: My Content Manager Applications
108
3: AccuWeather.com Premium Trial
4: SportsTracker Trial
5: MobiTV Trial
6: eBay Free Trial
7: Instant Msg.
5: Call Tones
Contacts
1: Find
2: Add New Entry
3: My Phone #
4: Speed Dial #s
5: Group Setting
1: Family
2: Friends
3: Colleague
4: VIPs
5: Unassigned
6: Services
1: Account Info
2: Customer Service
3: Dir Assist
InUse Menu
Press
to display the following options:
1: Call History
2: Contacts
3: 3-Way Call
4: Messaging
5: Voice Memo
6: Tools
7: Phone Info
109
Viewing History
You’ll find the Call History feature very helpful. It is a list of
the last 20 phone numbers (or contact entries) for calls
you placed, accepted, or missed. Call History makes
redialing a number fast and easy. It is continually updated
as new numbers are added to the beginning of the list and
the oldest entries are removed from the bottom of the list.
Each entry contains the phone number (if it is available)
and contact entry name (if the phone number is in your
Contacts). Duplicate calls (same number and type of call)
may only appear once on the list.
To view a Call History entry:
1. Press Menu ( ) to access the main menu.
2. Select Call History (
).
), Outgoing Calls (
3. Select Missed Calls (
), or
Incoming Calls (
).
4. Highlight the entry you wish to view and press
.
You can view your recent call history by pressing the talk
key once.
Tip:
112
Call History Options
For additional information and options on a particular call,
highlight a Call History entry and press
. This feature
displays the date and time of the call, the phone number (if
available), and the caller’s name (if the number is already in
your Contacts). By pressing Options ( ), you can select
from the following options:
ⅷ
Send Msg (
VoiceSMS message to another recipient.
Save ( ) to save the number if it is not already in
) to send a text, picture, handwritten, or
ⅷ
your Contacts. (See “Saving a Phone Number From Call
Save is only displayed when the phone number is NOT
saved in the contact list.
Note:
ⅷ
Prepend (
) to add numbers to the beginning of the
selected number. (See “Saving a Phone Number From
ⅷ
Erase (
) to delete the entry.
You can also view the next Call History entry by pressing
the navigation key right or view the previous entry by
pressing the navigation key left.
Tip:
113
Making a Call From Call History
To place a call from Call History:
1. Press Menu ( ) to access the main menu.
2. Select Call History (
).
), Outgoing Calls (
3. Select Missed Calls (
), or
Incoming Calls (
4. Use your navigation key to select a Call History entry
and press
or select Call ( ).
).
You cannot make calls from Call History to entries identified
as No Caller ID or Restricted.
Note:
114
Saving a Phone Number From
Call History
Your Sprint PCS Phone can store up to 300 contact entries.
Each entry’s name can contain up to twenty characters.
To save a phone number from Call History:
1. Use your navigation key to select a Call History entry
and press Options ( ).
2. Select Save (
).
3. Select Add New Entry to create a new internal contact
entry for the number or highlight a contact name and
press
to save the number to an existing entry.
4. Select the desired label and press
. (If adding a
number to an existing entry, skip to step 6.)
5. Use the keypad to type in the new entry name and
press
.
6. Select Done ( ).
After you have saved the number, the new contact entry is
You cannot save phone numbers from calls identified as
No Caller ID or Restricted.
Note:
115
Prepending a Phone Number From
Call History
If you need to make a call from Call History and you
happen to be outside your local area code, you can add the
appropriate prefix by prepending the number.
To prepend a phone number from Call History:
1. Select a Call History entry and press
.
2. Select Options ( ).
3. Select Prepend (
).
4. Enter the prefix and press Call ( ).
116
Erasing Call History
To erase individual Call History entries, (see “Call History
To erase Call History:
1. Press Menu ( ) to access the main menu.
2. Select Call History (
).
).
3. Select Erase History (
4. Select Missed Calls (
), Outgoing Calls (
),
Incoming Calls (
), or All Calls (
).
5. If you are certain you want to erase the call history,
select Yes and press
.
117
Section 2G
Using Contacts
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Adding a New Contact Entry
Finding Contact Entries
Contact Entry Options
Adding a Phone Number to a Contact Entry
Editing a Contact Entry’s Phone Number
Assigning Speed Dial Numbers
Editing a Contact Entry
Selecting a Ringer Type for an Entry
Secret Contact Entries
Dialing Sprint PCS Services
Now that you know the basics that make it easier to stay in touch
with people and information, you’re ready to explore your phone’s
more advanced features. This section explains how to use
your phone’s Contacts and helps you make the most of
your contacts and time when you are trying to connect
with the important people in your life.
119
Adding a New Contacts Entry
Your Sprint PCS Phone can store up to 300 contact entries.
Each entry’s name can contain up to twenty characters.
To add a new entry:
1. Press Menu ( ) to access the main menu.
2. Select Contacts (
3. Select Add New Entry (
4. Enter a name for the new entry and press
).
).
.
5. Press the navigation key down to highlight the
6. Enter the phone number for the entry and press
.
7. Press Done ( ) to save.
After you have saved the number, the new contact entry is
120
Assigning a Group Entry
Once you save a contact entry, you can select between five
different group listings for the entry. By assigning a contact
to a group, you can also search easily by using just a group
search instead.
To assign a contact to a group:
1. Select Contacts ( ) to access the contact list.
2. Highlight the desired contact and press
.
3. Select Edit ( ).
4. Press the navigation key down to highlight
Group ( ).
5. Press the navigation key left or right to select one of
the following:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Unassigned
Family
Friends
Colleague
VIPs
6. Select Done ( ).
121
Finding Contact Entries
There are several ways to display your contact entries: by
name, by speed dial number, by group, and by voice dial
tags. Follow the steps outlined in the sections below to
display entries from the Contacts menu.
Finding Names
To find contact entries by name:
1. Press Menu ( ) to access the main menu.
2. Select Contacts (
).
3. Select Find (
).
4. Scroll through all the entries using your navigation
key.
– or –
Enter the first few letters of an entry name in the Find
field. (The more letters you enter, the more your
search narrows.)
5. To display an entry, highlight it and press
an entry's default phone number, highlight the entry
and press
; to dial
.
From standby mode, press Contacts (right softkey)
to display the Search feature.
Shortcut:
122
Finding Speed Dial Numbers
To find phone numbers you have stored in speed dial
locations:
1. Press Menu ( ) to access the main menu.
2. Select Contacts (
).
3. Select Speed Dial #s (
).
4. Scroll through speed dial entries using your
navigation key. Speed dial numbers are displayed in
numeric order.
– or –
Enter the number of a speed dial location using your
keypad.
5. To display an entry, highlight it and press
.
6. To dial the entry, highlight it and press
.
Finding Group Entries
To find entries designated as part of a group:
1. Press Menu ( ) to access the main menu.
2. Select Contacts (
).
3. Select Group Setting (
).
4. Scroll through the group titles using your navigation
key. To display entries belonging to a group, highlight
the group and press
.
5. To dial the entry’s default phone number, press
.
123
Contact Entry Options
To edit a Contact entry’s information:
1. Select Contacts ( ).
2. Highlight the desired contact entry.
3. Select Options ( ).
4. Select Edit (
). The following options are available:
ⅷ
[Mobile, Home, Work, Pager, Fax, Others] allows you to
add a phone number to the entry label. (See “Adding a
ⅷ
ⅷ
ⅷ
[E-mail] allows you to add an e-mail address to the entry.
[URL] allows you to add a web address to the entry.
[Unassigned, Family, Friends, Colleague, VIPs] allows you
to select a group type for the entry by pressing the
navigation key left or right.
ⅷ
ⅷ
ⅷ
[Default Ringer] to assign a preprogrammed ringer.
[Birthday] allows you to enter a birth date in the entry.
[Secret] allows you to hide all contact information when
being viewed in the contact list. A lock code is required
to view or edit the contact entry information.
ⅷ
[Image] (No Image, People, Animal, Other, Downloads,
My Pictures) allows you to assign a preset image to the
contact entry. To access the image options, press
for
Edit.
124
Adding a Phone Number to a Contact
Entry
To add a phone number to an entry:
2. Press Edit ( ).
3. Press the navigation key down until the desired label
is highlighted.
4. Enter the new phone number and press
.
5. Press Done ( ) to save the new number.
Editing a Contact Entry’s Phone Number
To edit an entry’s phone number:
2. Press Edit ( ).
3. Highlight the number you wish to edit and press
.
4. Press
to clear one digit at a time, or press and
to erase the entire number.
hold
5. Re-enter or edit the number and press
.
6. Press Done ( ) to save the number.
125
Assigning Speed Dial Numbers
Your phone can store up to 99 phone numbers in speed
dial locations. For details on how to make calls using speed
dial numbers, see “Using One-Touch/Two-Touch Speed
Speed dial numbers can be assigned to a contact entry
once it has been saved.
To assign a Speed Dial number:
1. Press Menu ( ) to access the main menu.
2. Select Contacts (
).
3. Select Speed Dial #s (
4. Press the navigation key up or down to highlight an
available speed dial location and press
).
.
5. Highlight the desired contact entry by pressing the
navigation key up or down or by entering the first
few letters of the contact entry name, and press
.
6. Select Assign ( ) (If the entry has more than one
number, highlight the desired number and select
Assign [ ].)
126
Editing a Contact Entry
To make changes to an entry:
1. Display an internal contact entry.
2. Press Edit ( ).
3. Highlight the part of the entry you wish to edit
(Name, Group, Ringer, etc.) and press
4. Add and/or edit the desired information and
press
.
.
5. Press Done ( ) to save your changes.
127
Selecting a Ringer Type for an Entry
You can assign a ringer type to a contact entry so you can
identify the caller by the ringer type. (See “Ringer Types”
To select a ringer type for an entry:
1. Display a contact entry.
2. Press Edit ( ).
3. Select Default Ringer ( ) and select Edit
.
4. Press the navigation key left or right to select the
desired ringer category.
5. Press the navigation key down to highlight the Ringer
field. Press the navigation key left or right to scroll
through the available ringers. (A sample ringer will
sound as you highlight each option.)
6. When the desired ringer is selected, press
.
7. Press Done ( ) to save the new ringer type.
128
Dialing Sprint PCS Services
Your phone is preprogrammed with phone numbers for
various Sprint PCS Services.
To dial a service from your Contacts:
1. Press Menu ( ) to access the main menu.
2. Select Contacts (
3. Select Services (
4. Select Account Info (
).
).
), Customer Service (
) and press
), or
Dir Assist (
.
To dial a service from standby mode using your keypad:
1. Dial the appropriate service number:
Ⅲ
Customer Service –
.
Ⅲ
Directory Assistance –
.
Ⅲ
Ⅲ
Account Info –
.
Sprint PCS Operator –
.
Ⅲ
Sprint PCS Voice Command –
to place the call.
.
2. Press
129
Section 2H
Using the Phone’s Scheduler and
Tools
In This Section
ࡗ ࡗ ࡗ ࡗ Your Sprint PCS Phone is equipped with several personal
information management features that help you manage your
busy lifestyle. This section shows you how to use these
features to turn your phone into a time management planner
that helps you keep up with your contacts, schedules, and
commitments. It takes productivity to a whole new level.
131
Using Your Phone’s Scheduler
Adding an Event to the Scheduler
Your Calendar helps organize your time and reminds you
of important events.
To add an event:
1. Press Menu ( ) to access the main menu.
2. Select Tools (
).
3. Select Scheduler (
).
4. Using your navigation key, highlight the day to which
you would like to add an event.
5. Select Options ( ).
6. Select Add New (
).
Press the navigation key up or down to scroll by week
through the Calendar or left or right to scroll by day. Press
Options to jump to a specific date.
Tip:
7. Enter a description for the event using the keypad
8. Enter the start time and then press the navigation key
down and enter the date of your event using the
keypad.
132
9. Press the navigation key down to highlight End. Enter
the end time and then press the navigation key down
and enter the date of your event.
10. Press the navigation key down to highlight the
Alert ( ) field. Press the navigation key left or right
to select one of the following alert notifications:
Ⅲ
No Alarm, On Time, 10min before, 30min before, or
1Hr before
11. Select Save ( ) to save the event.
Event Alerts
There are several ways your Sprint PCS Phone alerts you of
scheduled events:
ⅷ
ⅷ
ⅷ
ⅷ
By playing the assigned ringer type.
By illuminating the backlight.
By flashing the LED.
By playing animation
Event Alert Menu
When your phone is turned on and you have an event
alarm scheduled, your phone alerts you and displays the
event summary. To silence the alarm and reset the
schedule, press
.
133
Viewing Events
To view your scheduled events:
1. Press Menu ( ) to access the main menu.
2. Select Tools (
).
3. Select Scheduler (
).
4. Using your navigation key, highlight the day for
which you would like to view events and select
View ( ). (If you have events scheduled for the
selected day, they will be listed in chronological
order).
In the calendar view, days with events scheduled are
outlined.
Tip:
5. To display the details of an event listed in the
schedule, highlight it and press
.
Going to Today’s Calendar Menu
The Today menu allows you to view the events for the day.
To access the today menu:
1. Press Menu ( ) to access the main menu.
2. Select Tools (
).
).
3. Select Today (
134
Erasing a Day’s Events
To erase a day’s scheduled events:
1. Press Menu ( ) to access the main menu.
2. Select Tools (
).
3. Select Scheduler (
).
4. Using your navigation key, highlight the day for
which you would like to erase events and press
.
In the calendar view, days with events scheduled are
outlined.
Tip:
5. Select Erase All (
). (An confirmation will appear
asking you to confirm the deletion.)
6. Select Yes or No and press
.
135
Using Your Phone’s Alarm Clock
Your phone comes with a built-in alarm clock with
multiple alarm capabilities.
To use the alarm clock:
1. Press Menu ( ) to access the main menu.
2. Select Tools (
).
3. Select Alarm Clock (
).
4. Select Alarm #1 (
), Alarm #2 (
), or
Alarm #3 (
).
5. Press the navigation key left or right to select On.
6. Press the navigation key down to highlight the
Time ( ) field. Enter a time for the alarm using the
keypad. (Press
for AM or
for PM.)
7. Press the navigation key down to highlight the
Ringer Type ( ) field.
8. Press the navigation key left or right to select the
desired ringer.
9. Press the navigation key down to highlight the Repeat
field. Press the navigation key left or right to select
one of the following:
Ⅲ
Daily, Once, Mon to Fri, or Sat & Sun
10. Select Save ( ).
136
Using Your Phone’s Memo Pad
Your Sprint PCS Phone comes with a memo pad you can
use to compose and store reminders and notes to help
keep you organized.
To compose a memo:
1. Press Menu ( ) to access the main menu.
2. Select Tools (
).
3. Select Memo Pad (
).
If there are no existing memos already saved, the new
memo screen will automatically be displayed.
Note:
4. Select Add New ( ).
5. Type your note using the keypad and select Save ( ).
To read a saved memo:
1. Press Menu ( ) to access the main menu.
2. Select Tools (
3. Select Memo Pad (
4. Highlight a memo and press
).
).
.
137
To delete saved memos:
1. Press Menu ( ) to access the main menu.
2. Select Tools (
).
3. Select Memo Pad (
).
4. Highlight a memo and select Options ( ).
5. Select Erase (
) to erase the highlighted memo or
) to erase all saved memos.
Erase All (
6. Select Yes to confirm and press
.
138
Using Your Phone’s Tools
In addition to helping you be more efficient and organized,
your Sprint PCS Phone offers useful and entertaining tools.
Using the Task List
Your phone comes with a built-in task list to allow you to
keep track of important items.
To use the task list:
1. Press Menu ( ) to access the main menu.
2. Select Tools (
).
3. Select Task List (
).
If there are no existing tasks, the New Task screen is
automatically displayed.
Note:
4. Select Add New ( ).
5. Enter the Task Description and select Next ( ).
6. Enter the Due Time and press the navigation key down
to highlight the Due Date field.
7. Enter the Due Date and press the navigation key down
to highlight the Priority field.
8. Select the desired Priority (Low or High) by pressing
the navigation key left or right.
9. Select Save ( ) to save.
139
Viewing a Saved Task
1. Press Menu ( ) to access the main menu.
2. Select Tools (
).
3. Select Task List (
).
4. Highlight a task and press
.
Deleting a Task
1. Press Menu ( ) to access the main menu.
2. Select Tools (
).
3. Select Task List (
).
4. Highlight a task and select Options ( ).
5. Select Erase (
) to erase the highlighted task or
) to erase all saved tasks.
Erase All (
6. Select Yes to confirm and press
.
World Time
To view the time in over twenty different locations:
1. Press Menu ( ) to access the main menu.
2. Select Tools (
).
3. Select World Time (
).
4. Press the navigation key left or right to scroll through
different time zones.
140
You can turn Daylight Savings Time on or off by pressing the
right softkey to select DST Setting.
Note:
Using the Calculator
Your phone comes with a built-in calculator.
To use the calculator:
1. Press Menu ( ) to access the main menu.
2. Select Tools (
).
3. Select Calculator (
).
4. Enter the first number using your keypad and
perform one of the following functions:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Press the navigation key up for Multiplication (x).
Press the navigation key down for Division (÷).
Press the navigation key left for Subtraction (-).
Press the navigation key right for Addition (+).
Ⅲ
Ⅲ
Press
Press
for a decimal point.
for a negative or positive number.
Ⅲ
Press
to cancel the calculation.
5. Enter the second number and press
or
for
Equal (=).
141
Countdown
Countdown allows you to enter a future date and time into
the phone and then see the amount of days, hours, and
minutes until that time is reached.
To set up a new countdown:
1. Press Menu ( ) to access the main menu.
2. Select Tools (
).
3. Select Countdown (
).
If there are no existing countdowns, the New Countdowns
screen is automatically displayed.
Note:
4. Select Add New ( ).
5. Enter the Countdown Description and select
Next ( ).
6. Enter the Input Time and Input Date and select Save
(
). Press
for AM or
for PM.
142
To view a countdown:
1. Press Menu ( ) to access the main menu.
2. Select Tools (
3. Select Countdown (
4. Highlight the desired countdown and press
).
)..
.
When viewing an existing countdown, press the navigation
key left or right to cycle between countdown entries.
Note:
143
Section 2I
Using Your Phone’s Voice Services
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Activating Voice Recognition
Using Voice Dial
Using Contacts
Using Name Lookup
Voice Memos
Phone Status Information
My Phone Number
Your Sprint PCS Vision Phone’s Voice Services let you place
calls using your voice, store voice reminders, check phone
status, and record memos right on your phone. This section
includes easy-to-follow instructions on using voice-
activated dialing.
Section 2I: Using Your Phone’s Voice Services
145
Activating Voice Recognition
Voice recognition allows you to say commands to perform
common functions supported by your phone. There is no
voice training required to use the voice recognition
feature. You simply say the pre-designated command
displayed on your screen in a normal tone of voice to
perform the desired function.
To activate voice recognition:
1. Press and hold
. (The phone prompts you to say a
voice command.)
2. Wait for the beep and then say one of the following
commands:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Voice Dial
Contacts
Voice Memo
Status
My Phone #
When it recognizes one of these commands, the phone
launches the associated application. If the phone does not
hear a command within approximately eight seconds, it
de-activates voice recognition without taking any action.
If you want to assign a navigation key to activate voice
recognition, press the left softkey for Menu and select
Settings. Press 7 for Launch Pad. On this menu, you can
change button assignments, including the button used to
launch “Voice Dial,” which is the voice recognition
application.
Note:
146
Section 2I: Using Your Phone’s Voice Services
Using Voice Dial
Voice Dial allows you to dial any valid 7 or 10 digit North
American phone number or contact entry by speaking the
number or name naturally, without pausing.
Tips for using Voice Dial:
ⅷ
Voice Dial works best in quieter environments.
ⅷ
When saying a number (Digit Dialing), speak at a
normal speed and say each digit clearly. There is no
need to pause between digits.
ⅷ
The phone recognizes the digits one, two, three, four,
five, six, seven, eight, nine, zero, and oh. The phone
does not recognize numbers such as “one eight
hundred” for “1-800.” Instead, say “one-eight-zero-zero.”
ⅷ
ⅷ
The phone recognizes only valid 7 or 10 digit North
American phone numbers.
If your phone does not usually recognize you correctly
when you are using Digit Dial, try adapting Digit Dial to
your voice, which can significantly improve accuracy
for some speakers. (See “Adapting Digit Dial” on
page 149 for details.)
To place a call using Voice Dial:
1. Activate voice recognition by pressing and holding
. (The phone prompts you for a command.)
2. Say Voice Dial. (The phone prompts you to say the
name or number clearly.)
3. Say a valid contact entry or 7 or 10 digit North
American phone number naturally and clearly.
Section 2I: Using Your Phone’s Voice Services
147
4. If the phone asks you, “Did You Say,” followed by the
correct name or number, say Yes.
5. If the phone asks you, “Did You Say,” followed by an
incorrect name or number, say No. (If there are other
alternatives, the phone will prompt you with the next
one. You can also select the desired number by using
the navigation key. The phone will then dial the
number.)
Enabling/Disabling Digit Dial Choice Lists
You can customize whether the Digit Dial feature displays
the list of top voice recognition choices or automatically
dials the first number, without displaying a choice list.
To enable or disable choice lists for Digit Dial:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select Voice Service (
).
4. Select Settings (
).
5. Select Choice Lists (
).
).
6. Select Digit Dialing (
7. Press the navigation key up or down to select
Automatic, Always On or Always Off and press
.
148
Section 2I: Using Your Phone’s Voice Services
Adapting Digit Dial
Digit Dialing is speaker independent, which means that no
training or adaptation is required. Some users with heavy
accents or unusual voice characteristics may find difficulty
in achieving high accuracy with speaker independent Digit
Dialing, so the Adapt Digits feature allows users to
dramatically improve the digit accuracy through
adaptation. Users who get acceptable digit recognition
accuracy will find no additional benefit to performing the
Adapt Digit adaptation.
After you adapt Digit Dial, your phone will be customized
to your voice. Other people will not be able to use Digit
Dial on your phone unless they reset the phone to factory
defaults.
ONLY adapt Digit Dial if the system is frequently mis-
recognizing your speech. You can always restore the
system to its original factory setting.
Note:
Adaptation involves recording several digit sequences to
teach the system your voice. The adaptation process takes
about 3 minutes.
Tips for adapting Digit Dial:
ⅷ
Adapt digits in a quiet place.
ⅷ
Make sure you wait for the beep before starting to
speak.
ⅷ
ⅷ
Speak clearly, but say each digit sequence naturally.
If you make a mistake while recording a sequence of
digits, or if there is an unexpected noise that spoils the
recording, you can say or select No when the prompt
Section 2I: Using Your Phone’s Voice Services
149
asks, “Did the recording sound OK?” You will then be
prompted to re-record the sequence.
To adapt Digit Dial to your voice:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select Voice Service (
).
4. Select Settings (
).
5. Select Digit Dialing (
).
). (The phone displays the first
6. Select Adapt Digits (
digit sequence.)
7. When you are ready to start recording, press
.
(The phone prompts you to say the first sequence of
digits.)
8. Wait for the beep, and then repeat the digits using a
normal tone of voice. (The phone plays back your
recording and asks you if the recording sounds “OK.”)
Ⅲ
If the recording sounds OK (no mistakes and no
background noises), say Yes.
Ⅲ
If you need to re-record the digits to fix any
problems, say No. (The phone then prompts you
to say the digits again.)
9. Wait for the beep, and then record the digits again.
(Repeat this step until you are satisfied with the
recording.)
150
Section 2I: Using Your Phone’s Voice Services
10. After confirming that the recording sounds OK,
repeat the recording process with the next set of
digits.
11. Repeat steps 8-10 for another nine sets of digits.
12. When you are finished with a full session, you will
reach a screen that reads, “Adaptation Complete.”
Resetting Digit Dial Adaptation
To erase any adaptation and reset Digit Dial to its original
state:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select Voice Service (
).
4. Select Settings (
).
5. Select Digit Dialing (
6. Select Reset Digits (
).
).
7. Press
to select OK.
Section 2I: Using Your Phone’s Voice Services
151
Using Voice Dial
For best results with Voice Dial enter first and last names in
your contacts, avoid using abbreviations, and make sure
the names are spelled correctly. Voice Dial automatically
voice-activates every entry in your contacts without the
need to record or “train” names before using them. With
Voice Dial you can dial any person in your contacts by
saying that person's name.
To place a call using Voice Dial:
1. Activate voice recognition by pressing and holding
. (The phone prompts you for a command.)
2. Say Voice Dial. (The phone prompts you to say a name
or a phone number.)
3. Say the full name of the person you want to call,
exactly as it is entered in your contacts. (The phone
plays the name through the earpiece and displays it
on the screen.)
Ⅲ
If the contact contains only one number for the
name, the phone automatically dials that number.
Ⅲ
If the name that you spoke has more than one
number associated with it, the phone displays the
different locations (Home, Work, Mobile, Pager,
Fax, or Others) and asks you which one to dial. Say
one of the location names and the phone will dial
the number for the location you specified.
152
Section 2I: Using Your Phone’s Voice Services
Enabling/Disabling Name Dial Choice Lists
You can customize whether the Name Dial feature displays
a list of choices for names that sound alike, or brings up
information for the first recognized name without
displaying a choice list.
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select Voice Service (
).
4. Select Settings (
).
5. Select Choice Lists (
6. Select Name Dialing (
).
).
7. Press the navigation key up or down to select
Automatic, Always On, or Always Off and press
.
(When choice lists are enabled for Name Dial, after
you say the name, the phone will display one or more
names on the screen and prompt you to confirm the
name you spoke.)
Ⅲ
If the phone says, “Did you say,” followed by the
correct name, say Yes.
Ⅲ
If the phone says, “Did You Say,” followed by an
incorrect name, say No. The phone will prompt
you with the next name, if there is one. If there
are no more names, the phone will say “Sorry, No
Match Found,” and will not place a call.
Section 2I: Using Your Phone’s Voice Services
153
Using Contacts
Contacts allows you retrieve contact information for any
entry saved in your contact list by saying the full name of
the person.
To retrieve information using Contacts command:
1. Activate voice recognition by pressing and holding
. (The phone will prompt you for a command.)
2. Say Contacts. (The phone will prompt you to say the
name.)
3. Say the full name of the person, exactly as it is
entered in your contacts. (The phone will play the
name it recognized through the earpiece, and then
open the contact information for that name.)
154
Section 2I: Using Your Phone’s Voice Services
Enabling/Disabling Contact Choice Lists
You can customize whether the Contacts feature displays a
list of choices for names that sound alike, or brings up
information for the first recognized name without
displaying a choice list.
To enable or disable choice lists for the Contacts command:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select Voice Service (
).
4. Select Settings (
5. Select Choice Lists (
6. Select Contacts (
).
).
).
7. Press the navigation key up or down to select
Automatic, Always On, or Always Off and press
.
(When choice lists are enabled for contacts, after you
say the name, the phone will display one or more
names on the screen and prompt you to confirm the
name you spoke.)
Ⅲ
If the phone says, “Did You Say,” followed by the
correct name, say Yes.
Ⅲ
If the phone says, “Did You Say,” followed by an
incorrect name, say No. The phone then prompts
you with the next name, if there is one. If there
are no more names, the phone will say “Sorry, No
Match Found.”
Section 2I: Using Your Phone’s Voice Services
155
Voice Memos
You can use your phone’s voice recognition feature to
record brief memos to remind you of important events,
phone numbers, or grocery list items.
Recording Voice Memos
To record a voice memo:
1. Press and hold
to activate voice recognition. (The
phone prompts you to say a voice command.)
2. Wait for the beep and say Voice Memo.
3. Start recording the memo after the beep.
4. Select Finish ( ).
156
Section 2I: Using Your Phone’s Voice Services
Managing Voice Memos
You can use your phone’s Voice Services to record brief
memos to remind you of important events, phone
numbers, or grocery list items.
Recording Voice Memos
To record a voice memo:
1. Press Menu ( ) to access the main menu.
2. Select Voice Memo (
).
3. Select Record (
). (The phone prompts you to start
recording after the beep.)
4. Wait for the beep and then start speaking. (As it is
recording, the phone displays a countdown timer
that shows how many seconds are left for recording.)
5. To pause the memo, select Pause ( ). To resume the
recording, select Resume ( ).
6. To finish recording, select Finish ( ).
To record a conversation during a phone call:
1. During a call, select Options ( ).
2. Select Voice Memo (
) (A 1 minute counter is
displayed on the screen to indicating the amount of
time a single voice memo can be recorded.)
Only incoming audio is recorded when selecting voice
memo during a call.
Tip:
Section 2I: Using Your Phone’s Voice Services
157
3. To pause the memo, select Pause ( ). To resume the
recording, select Resume ( ).
4. To finish recording, select Finish ( ).
A total of ten 1 minute memos can be recorded and saved.
Tip:
Reviewing and Erasing Memos
To play the voice memos you have recorded:
1. Press Menu ( ) to access the main menu.
2. Select Voice Memo (
).
3. Select Review (
). (The phone displays a list of
saved memos, with the first one selected.)
4. Highlight the desired memo and press
.
— or —
Press the number corresponding to the memo you
want to review.
158
Section 2I: Using Your Phone’s Voice Services
To erase an individual memo:
1. Press Menu ( ) to access the main menu.
2. Select Voice Memo (
3. Select Review ( ).
).
4. Highlight the desired memo to erase and select
Options ( ).
5. Select Erase (
).
6. Select Yes and press
.
To erase all voice memos:
1. Press Menu ( ) to access the main menu.
2. Select Voice Memo (
).
3. Select Erase All (
).
4. Select Yes and press
.
Section 2I: Using Your Phone’s Voice Services
159
Phone Status Information
The voice recognition Status option gives you an update on
your phone's service, signal strength, and battery level.
To retrieve your phone's status information:
1. Press and hold
to activate voice recognition. (The
phone prompts you to say a voice command.)
2. Wait for the beep and say Status. (The following chart
outlines the status responses.)
No Coverage - When handset is scanning.
SprintCoverage-Handsetinonanon-roamsystem.
Digital Roam - Handset is on a digital roam system.
Coverage
High - Number of bars displayed is 6.
Signal Strength
Good - Number of bars displayed is 3/4.
Low - Number of bars displayed is 1/2.
No Signal - Handset is scanning for system.
High - Number of bars displayed in the
battery icon is 3.
Battery
Medium - Number of bars displayed in the
battery icon is 2.
Low - Number of bars displayed in the
battery icon is 1.
Empty - Low battery alert.
160
Section 2I: Using Your Phone’s Voice Services
My Phone Number
You can use your phone’s Voice Services to hear and
display your phone number on-screen.
Getting Your Phone Number
To access your phone number:
1. Press and hold
to activate voice recognition. (The
phone prompts you to say a voice command.)
2. Wait for the beep and say My Phone Number.
Section 2I: Using Your Phone’s Voice Services
161
162
Section 2I: Using Your Phone’s Voice Services
Section 2J
Using the Built-in Camera
In This Section
ࡗ ࡗ ࡗ ࡗ Sending Sprint PCS Picture MailSM
The built-in camera on your PM-A840 by Samsung gives you the
ability to take full-color digital pictures, view them using the
phone’s display, and instantly share them with your family and
friends. It’s fun and as easy to use as a traditional point-and-
click camera: just take a picture, view it on your phone’s
display, and send it from your phone to up to ten people.
This section explains the features and options of your
Sprint PCS Phone’s built-in camera.
163
Taking Pictures
Taking pictures with your phone’s built-in camera is as
simple as choosing a subject, pointing the lens, and
pressing a button. You can activate the phone’s camera
mode whether the phone is open or closed.
To take a picture with the phone open:
1. Press Menu ( ) to access the main menu.
2. Select Pictures (
) to access the Pictures menu.
3. Select Camera (
) to activate camera mode.
(Additional camera options are available through the
Options” on page 168 for more information.)
4. Using the phone’s LCD as a viewfinder, aim the
camera lens at your subject.
5. Press Capture ( ) or
until the shutter sounds.
(The picture will automatically be saved in the In
Camera folder.)
Ⅲ
To return to camera mode to take another picture,
press
.
6. Press Next ( ) for more options:
Ⅲ
Send Msg to send the picture to up to 10 contacts
Ⅲ
Upload to upload the picture you just took to the
picturemail). Depending on your settings, you may
164
be prompted to accept a Sprint PCS Vision
connection.
Ⅲ
Ⅲ
Assign to assign the picture as a Picture ID, Screen
Saver, or Incoming Call.
Erase to delete the picture you just took or all
select Erase All to delete all pictures saved in your
phone.
Ⅲ
Ⅲ
Ⅲ
Camera Mode to return to camera mode to take
another picture.
Review Pictures to go to the In Camera folder to
review your saved pictures.
Postcard allows you to super-impose digitized
handwritten text over the image before sending
to a recipient.
To take a picture with the phone closed:
1. Press and hold the side camera button to activate
camera mode.
2. Point the camera lens at your subject. (You can check
the picture framing through the display screen.)
When you are using the display as a view finder, the image
preview will automatically change when the phone is
rotated vertically or horizontally.
Note:
3. Press the side camera button to take the picture.
(The picture will automatically be saved in the
In Camera folder.)
165
Postcard
The postcard option allows you to superimpose a
handwritten message over an image that is stored in your
phone or when you are taking a new picture. The
handwriting is digitized and then displays on top of the
image. You can change the ink color, add a shadow, rotate,
zoom or move the handwriting until you are satisfied with
the image.
To take a postcard picture:
1. Press and hold the side camera button to activate
camera mode.
2. Press the side camera button to take the picture.
3. Press
for Next.
4. Select Postcard (
).
5. Using the viewfinder, aim the camera at the desired
handwritten text (make sure all of the text fits
comfortably inside the screen) and select
Capture ( ).
6. Press
to display the following options:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Save
Ink Color
Shadow
Rotate
Zoom
Move
7. When finished select Options ( ) and choose Save.
166
Creating Your Sprint PCS Picture Mail Password
The first time you use any of the picture management
options involving the Sprint PCS Picture Mail Web site, you
will need to establish a Sprint PCS Picture Mail password
through your Sprint PCS Vision Picture Phone. This
password will also allow you to sign in to the Sprint PCS
and manage your uploaded pictures and albums.
To create your Sprint PCS Picture Mail password:
1. Press Menu ( ) to access the main menu.
2. Select Pictures (
3. Select Online Albums (
4. Select View Albums and press
) to access the Pictures menu.
).
. (You will be
prompted to create a Sprint PCS Picture Mail
password.)
If your Sprint PCS Service Plan does not include Sprint PCS
Picture Mail, you will first be prompted to subscribe to the
service for an additional monthly charge.
Note:
5. Enter a four- to eight-digit password and press
.
(You will be prompted to confirm your password.)
6. Please wait while the system creates your account.
Write down your Sprint PCS Picture Mail password in a
secure place.
Tip:
Once you have received confirmation that your account
has been successfully registered, you may upload and share
pictures and access the Sprint PCS Picture Mail Web site.
167
Camera Mode Options
When the phone is in camera mode, press Options ( ) to
display the following:
2. Fun Tools to select from the following options:
Ⅲ
Fun Frames to select your favorite fun picture
frame to decorate your picture. (Fun Frames are
only available in full mode. See “Fun Frames” on
Ⅲ
Color Tones to select a wide variety of color tones
for the picture (Auto, Sepia, Mono, Warm, or Cool.
See “Color Tones” on page 171.)
3. Controls to select from the following options:
Ⅲ
Brightness Allows you to adjust the brightness
using 10 different levels from -5 to +5.
Ⅲ
White Balance to adjust white balance based on
changing conditions. Select from Auto, Sunny,
Cloudy, Tungsten, Fluorescent, or Manual.
4. Settings to select Resolution, Quality, Shutter Sound, and
for details.)
5. Review Pictures to go to your phone’s In Camera folder.
168
Settingthe Self Timer
To activate the Self Timer:
1. From camera mode, press Options ( ).
2. Select Self Timer (
).
3. Press the navigation key up or down to select the
desired length of delay (Off, 5 Sec, 10 Sec) and
press
.
4. Select Start ( ) when you are ready to start the timer.
5. Get ready for the picture. (The phone will begin to
beep when the timer is started.)
To cancel the Self Timer after it has started:
ᮣ
Press
.
While the Self-Timer is active, all keys are disabled except
Back (stops the timer and returns to the camera mode) and
Cancel (cancels the timer and returns to camera mode).
Note:
169
Fun Frames
Allows you to choose from several frame overlays for your
image. The following frames are available:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Off (No frame overlay image)
Love Letter
Merry christmas
Movie star
Top secret
Dollar
Memories
Robinhood
Roses for Love
Love
Stars
Beans
To access fun frames:
1. From camera mode, press Options ( ).
2. Select Fun Tools (
3. Highlight Fun Frames and press
4. Press the navigation key left or right to select the
desired frame and press
).
.
.
170
Color Tones
Allows you to choose a custom color tone for your images.
The available options are:
Ⅲ
Auto: Automatically adjusts the picture for the
best color quality available.
Ⅲ
Sepia: Adds a sepia tint to the picture. This is the
common orange tint that was popular back in
early photography.
Ⅲ
Ⅲ
Mono: Changes the picture to black and white.
Warm: Increases red and orange tints giving a
warm color.
Ⅲ
Cool: Increases blue and green tints to give a cool
color.
To access color tones:
1. From camera mode, press Options ( ).
2. Select Fun Tools (
3. Highlight Color Tones and press
4. Press the navigation key left or right to select the
).
.
desired color tone and press
.
171
Using the Zoom
This feature allows you to zoom in on an object when you
take a picture. Depending on your resolution settings, you
can adjust the zoom up to ten different levels.
To use the zoom:
1. From camera mode, press the navigation left or right
to adjust the zoom.
2. Press Capture ( ) or
to take the picture. (The
picture will automatically be saved in the In Camera
folder based on your storage setting.)
Selecting Camera Settings
To select your camera settings:
1. From camera mode, press Options ( ).
2. Select Settings (
3. Press the navigation key down to highlight one of the
following options and press
).
.
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Resolution to select a picture’s file size
(High: 640x480, Med: 320x240, or Low: 160x120).
Quality to select the picture quality setting (Fine,
Normal, or Economy).
Shutter Sound to select a shutter sound (Shutter 1-6,
Say Cheese, and Off).
Auto Erase If the auto erase function is on, the
pictures stored in your phone’s memory are
automatically deleted after they are uploaded to
an online album.
172
Storing Pictures
Your phone’s picture storage area is called My Pictures.
There are two types of folders in My Pictures that can be
used separately according to your needs:
ⅷ
In Camera (see below)
ⅷ
In Camera Folder
Once a picture is taken, it is automatically saved to the
In Camera folder. From the In Camera folder, you can view all
of the pictures you have taken, store selected images in your
phone, send pictures to the Sprint PCS Picture Mail Web site
additional picture options.
To review your stored pictures in the In Camera folder:
1. Press Menu ( ) to access the main menu.
2. Select Pictures (
).
3. Select My Pictures (
).
4. Select In Camera and press
.
5. Use your navigation key to view and scroll through
the pictures.
173
In Camera Folder Options
When you are viewing the images in the In Camera folder
press Options ( ) to display the following options:
ⅷ
Upload to upload pictures from the In Camera folder to
picturemail). Depending on your settings, you may be
prompted to accept a Sprint PCS Vision connection.
Choose from the following options:
Ⅲ
Upload to upload the currently highlighted picture
or to upload all pictures in the In Camera folder.
If this is the first time you have accessed the Sprint PCS
Picture Mail account, you will be prompted to create your
Sprint PCS Picture Mail Password. See “Creating Your
Note:
ⅷ
ⅷ
Assign to display the currently highlighted picture for
picture ID, incoming call, or screen saver.
Save to Phone allows you to save images from the In
Camera folder into the phone memory for use in
assigning images to contacts, screen savers, etc.
ⅷ
ⅷ
Edit Caption allows you to rename the image file. (The
edit option is only available in the “In Camera” menu.)
Erase to delete pictures in the In Camera or Saved to
Phone folder. Select Erase This or Erase All.
Deleting pictures will free up memory space in your phone
to enable you to take more pictures.
Note:
ⅷ
Picture Info displays the selected picture’s information
containing picture name, time and date, picture size,
uploaded status, resolution, and quality.
174
ⅷ
ⅷ
Camera Mode allows you to switch to camera mode to
take additional pictures.
Thumbnail/Expand to switch the display from expanded
view to thumbnail view (up to four pictures per
screen).
Saved to Phone Folder
When you assign or download a picture, it will
automatically be saved in the Saved to Phone folder. The
Saved to Phone folder allows you to store copies of
pictures on your phone and to assign pictures to various
phone tasks.
To save a picture to the Saved to Phone folder:
page 173), highlight a picture you wish to save to the
Saved to Phone folder and select Options ( ). (The In
Camera folder options will display.)
If there is no selected picture, the currently highlighted
picture will be selected.
Tip:
2. Select Save to Phone (
). (A copy of the picture will
be saved to the Saved to Phone folder.)
175
To view pictures stored in the Saved to Phone folder:
1. Press Menu ( ) to access the main menu.
2. Select Pictures (
).
3. Select My Pictures (
).
4. Highlight Saved to Phone and press
.
5. Use your navigation key to view and scroll through
the pictures.
Saved to Phone Folder Options
When you are viewing the Saved to Phone folder, press
Assign ( ) to display the following options:
ⅷ
Picture ID to display the currently highlighted picture
for incoming calls from a specific Contacts entry. Select
the desired entry and press
.
ⅷ
ⅷ
Screen Saver to display the currently highlighted
picture as a screen saver.
Incoming Call to display With Caller ID or No Caller ID
when receiving incoming calls.
Pictures assigned as Picture ID or Screen Savers will
automatically be copied to the Saved to Phone folder.
Note:
176
Sending Sprint PCS Picture MailSM
Once you’ve taken a picture, you can use the messaging
capabilities of your Sprint PCS Vision Picture Phone to
instantly share it with family and friends. You can send a
picture to up to ten people at a time using their email
addresses or their Sprint PCS Phone Numbers.
Sending Pictures From the In Camera Folder
To send pictures from the In Camera folder:
1. Press Menu ( ) to access the main menu.
2. Select Pictures (
).
3. Select My Pictures (
).
4. Select In Camera and press
.
5. Highlight the picture you wish to send and select
Send Msg ( ).
6. Select one of the following options and press
.
Ⅲ
Ⅲ
Ⅲ
Phone# to enter a mobile phone number directly.
Email to enter an email address directly.
Contacts to select recipients from your Contacts.
Highlight a recipient and press
.
Ⅲ
Ⅲ
Other Services to select from a list of other popular
services.
Update List to update the Other Services list.
7. Press Next ( ) when you are finished adding
recipients. (You may include up to ten recipients per
message.)
177
8. If you wish to include a text message, scroll to
Message and press Add ( ). Enter your message
using your keypad (or press Options [ ] to select
from Preset Msg, Recent Msg, or Emoticons and
9. If you wish to include audio with the picture, scroll to
Audio and press Record ( ). To begin recording,
press . (Maximum recording time is ten seconds.)
10. Confirm the recipients, message, voice memo, and
picture.
Ⅲ
To change a recipient, highlight the recipient,
press the appropriate softkey, and follow the
instructions to select or edit the recipient.
Ⅲ
Ⅲ
To change the text message, scroll to Message and
press the appropriate softkey.
To change the voice memo, highlight the box
next to Audio and press the appropriate softkey to
display options:
11. Select Send ( ) to send the picture.
178
Sending Pictures From Messaging
You can also send Sprint PCS Picture Mail from your
phone’s Messaging menu.
To send pictures from the Messaging menu:
1. Press Menu ( ) to access the main menu.
2. Select Messaging (
3. Select Send Message (
4. Select Picture Mail (
).
).
).
5. Select In Camera and press
. (The folder will
display up to four thumbnail pictures per screen.)
6. Use the navigation key to display the picture you
wish to send and select Next ( ).
7. To complete and send the picture, follow steps 6-11
To take and send a new picture from Messaging, select
New Picture during step 5 above, take the new picture, and
follow steps 6-11 in “Sending Pictures From the In Camera
Tip:
179
Managing Sprint PCS Picture Mail
Using the Sprint PCS Picture Mail Web Site
Once you have uploaded pictures from your phone
to your online Sprint PCS Picture Mail account at
on page 174), you can use your personal computer to
manage your pictures. From the Sprint PCS Picture Mail
edit album titles, add captions and organize images. You
can even send your pictures to be printed at participating
retail locations.
You will also have access to picture management tools to
improve and customize your pictures. You'll be able to
lighten, darken, crop, add antique effects, add comic
bubbles and cartoon effects, and use other features to
transform your pictures.
To access the Sprint PCS Picture Mail Web site:
1. From your computer’s Internet connection, go to
2. Enter your Sprint PCS Phone Number and Sprint PCS
180
Managing Online Pictures From Your Phone
You can use your phone to manage, edit, or share pictures
you have uploaded to the Sprint PCS Picture Mail Web site
Options” on page 174 for information about uploading.)
To view your online pictures from your phone:
1. Press Menu ( ) to access the main menu.
2. Select Pictures (
).
3. Select Online Albums (
).
4. Select View Albums and press
. (Depending on
your settings you may be prompted to accept a
Sprint PCS Vision connection.) The My Uploads folder
and your albums appear.
5. Highlight Uploads or an album title and press
to
display. (Thumbnail pictures, up to four per screen,
are displayed.)
To expand a selected picture from thumbnail to full-screen,
select Options (Right softkey) and select Expand.
Tip:
6. Use your navigation key to select a picture.
7. Press Options ( ) to display your online picture
options.
181
Uploading Pictures
To upload pictures:
1. Press Menu ( ) to access the main menu.
2. Select Pictures (
).
3. Select Online Albums (
).
4. Select Upload Picture and press
. (Thumbnail
pictures will display.)
5. Select the picture(s) you wish to upload and press
Upload ( ).
6. Highlight Upload Selection or Upload All and
press
.
7. Highlight My Uploads or Other Album and press
.
182
Downloading Your Online Pictures
From your online Sprint PCS Picture Mail albums display at
www.sprint.com/picturemail, you can select pictures to
download to your phone’s Saved to Phone folder.
To download pictures from the Sprint PCS Picture Mail
Web site:
1. From the online pictures display, select the picture
page 181.)
2. Highlight Save To Phone and press
.
183
186
Using Voicemail
Setting Up Your Voicemail
All unanswered calls to your Sprint PCS Phone are
automatically transferred to your voicemail, even if your
phone is in use or turned off. Therefore, you will want to
set up your Sprint PCS Voicemail and personal greeting as
soon as your phone is activated.
To set up your voicemail:
1. Press and hold
.
2. Follow the system prompts to:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Create your pass code
Record your greeting
Record your name announcement
Choose whether or not to activate One-Touch
Message Access (a feature that lets you access
messages simply by pressing and holding
bypassing the need for you to enter your pass
code).
,
If you are concerned about unauthorized access to your
voicemail account, Sprint recommends you enable your
voicemail pass code.
Note:
188
Voicemail Notification
There are several ways your Sprint PCS Phone alerts you of
a new message:
ⅷ
ⅷ
ⅷ
ⅷ
By displaying
at the top of your screen.
By displaying a message on the screen.
By sounding the assigned ringer type.
By the LED blinking red.
New Voicemail Message Alerts
When you receive a new voice message, your phone alerts
you and prompts you to call your voicemail.
To call your voicemail:
ᮣ
Press and hold
To display your missed calls:
Press the navigation key up.
.
ᮣ
When you are roaming off the Sprint Nationwide
PCS Network, you may not receive notification of
new voicemail messages. It is recommended that
you periodically check your voicemail by dialing 1
+ area code + your Sprint PCS Phone number.
Important
When your voicemail answers, press ( ) and enter
*
your pass code. You will be charged roaming rates
when accessing voicemail while roaming off the
Sprint Nationwide PCS Network.
Your phone accepts messages even when it is turned off.
However, you are only notified of new messages when your
phone is turned on and you are in a Sprint PCS Service Area.
Note:
189
Retrieving Your Voicemail Messages
You can review your messages directly from your Sprint PCS
Phone or from any other touch-tone phone. To dial from
your Sprint PCS Phone, you can either speed dial your
voicemail or use the menu keys.
Using One-Touch Message Access
ᮣ
Press and hold
voicemail box.)
. (Your phone will dial your
Using the Menu Keys on Your Phone to Access Your
Messages
1. Press Menu ( ) to access the main menu.
2. Select Messaging (
).
).
3. Select Voicemail (
4. Select Call Voicemail (
) to listen to your messages.
You are charged for airtime minutes when you are
accessing your voicemail from your Sprint PCS Phone.
Note:
Using a Phone Other Than Your Sprint PCS Phone to
Access Messages
1. Dial your Sprint PCS Phone number.
2. When your voicemail answers, press the Asterisk (*)
key.
3. Enter your pass code.
190
When you call into voicemail, you first hear the header
information (date, time, and sender information) for the
message. To skip directly to the message, press 4 during
the header.
Tip:
Voicemail Button Guide
Here’s a quick guide to your keypad functions while
listening to voicemail messages. For further details and
menu options, see “Voicemail Menu Key” on page 196.
Date/Time Send Reply Advance
Replay
Rewind
Forward
Erase
Call Back
Help
Save
Skip
Cancel
191
Voicemail Options
Your Sprint PCS Phone offers several options for
organizing and accessing your voicemail.
Using Expert Mode
Using the Expert Mode setting for your personal voicemail
box helps you navigate through the voicemail system more
quickly by shortening the voice prompts you hear at each
level.
To turn Expert Mode on or off:
1. Press and hold
to access your voicemail. (If your
voicemail box contains any new or saved messages,
press
to access the main voicemail menu.)
2. Press
to change your Personal Options, following
the system prompts.
3. Press
for Expert Mode.
4. Press
to turn Expert Mode on or off.
Setting Up Group Distribution Lists
Create up to 20 separate group lists, each with up to 20
customers.
1. Press and hold
to access your voicemail. (If your
voicemail box contains any new or saved messages,
press
to access the main voicemail menu.)
2. Press
to change your Personal Options, following
the system prompts.
192
3. Press
for Administrative Options.
for Group Distribution Lists.
4. Press
5. Follow the voice prompts to create, edit, rename, or
delete group lists.
Sprint PCS Callback
Return a call after listening to a message without
disconnecting from voicemail.
ᮣ
Press
after listening to a message. (Once the call
is complete, you’re returned to the voicemail main
menu.)
Voicemail-to-Voicemail Message
Record and send a voice message to other Sprint PCS
Voicemail users.
1. From the main voicemail menu, press
to send a
message.
2. Follow the voice prompts to enter the phone
number.
3. Follow the voice prompts to record and send your
voice message.
Voicemail-to-Voicemail Message Reply
Reply to a voice message received from any other Sprint PCS
Voicemail user.
1. After listening to a voice message, press
.
2. Follow the voice prompts to record and send your
reply.
193
Voicemail-to-Voicemail Message Forwarding
Forward a voice message, except those marked “Private,”
to other Sprint PCS Voicemail users.
1. After listening to a message, press
.
2. Follow the voice prompts to enter the phone
number.
3. Follow the voice prompts to record your introduction
and forward the voice message.
Voicemail-to-Voicemail Receipt Request
Receive confirmation that your voice message has been
listened to when you send, forward, or reply to other
Sprint PCS users.
1. After you have recorded a message, press
to
indicate you are satisfied with the message you
recorded.
2. Press
3. Press
to mark receipt requested.
to send your voicemail message.
Continue Recording
When leaving a voice message, you can choose to continue
recording even after you’ve stopped.
ᮣ
Before pressing
to indicate that you are satisfied
with the message you recorded, press
continue recording.
to
194
Extended Absence Greeting
When your phone is turned off or you are off the Sprint
Nationwide PCS Network for an extended period, this
greeting can be played instead of your normal personal
greeting.
1. From the main voicemail menu, press
for
Personal Options.
2. Press
for greetings.
to record an Extended Absence Greeting.
3. Press
Clearing the Message Icon
Your phone may temporarily continue to display the
message icon after you have checked your voice and text
messages.
To clear the icon from the display screen:
1. Press Menu ( ) to access the main menu.
2. Select Messaging (
).
).
3. Select Voicemail (
4. Select Clear Envelope (
).
195
Voicemail Menu Key
Following the prompts on the voicemail system, you can
use your keypad to navigate through the voicemail menu.
The following list outlines your phone’s voicemail menu
structure.
Listen
Envelope Information
Reply
Advance 8 Seconds
Replay
Rewind
Forward Message
Erase
Callback
Save
Options
Send a Message
Personal Options
Notification Options
Phone Notification
Numeric Paging to a Sprint PCS Phone
Return to Personal Options Menu
Administrative Options
196
Skip Pass code
Autoplay
Message Date & Time On/Off
Change Pass code
Group Distribution List
Return to Personal Options Menu
Greetings
Personal Greetings
Name Announcement
Extended Absence Greeting
Return to Personal Options Menu
Expert Mode (On/Off)
Place a Call
Disconnect
197
Using SMS Text Messaging
With SMS Text Messaging, you can use a person’s wireless
phone number to send instant text messages from your
Sprint PCS Phone to their messaging-ready phone – and
they can send messages to you. When you receive a new
message, it will automatically display on your phone’s
screen.
In addition, SMS Text Messaging includes a variety of pre-set
messages, such as “I’m running late, I’m on my way,” that
make composing messages fast and easy. You can also
customize your own pre-set messages (up to 160 characters)
Composing SMS Text Messages
To compose an SMS Text message:
1. Press Menu ( ) to access the main menu.
2. Select Messaging (
).
3. Select Send Message (
).
4. Select Text Message and press
5. Select Mobile #, Email @, or Contacts and press
6. Enter the number, email address, or select the contact
.
.
and select Next ( ) or
. (You may include up to
10 recipients per message.)
7. Compose a message using one of the following
methods:
198
Ⅲ
Ⅲ
To type a message, use your keypad to enter your
message. Use to select a character input mode.
To use a preset message, a recent message, or an
emoticon select Options ( ) and select Preset Msg
(
), Recent Msg (
), or Emoticons (
). Press
the number on the keypad that corresponds to
the number next to the message or emoticon.
8. Select Next ( ).
9. Review your message and press Send ( ). (You may
also select the following additional messaging options
by pressing Options ( ):
Ⅲ
Edit to edit the existing message before sending.
Ⅲ
Priority to set the message priority level
[Normal or Urgent].
Ⅲ
Ⅲ
Call Back # to set the callback number
Save to Drafts to save the message without sending.
Accessing SMS Text Messages
To read an SMS Text message:
ᮣ
When you receive a text message, it will
automatically appear on your phone’s main display
screen. Use your navigation key to scroll down and
view the entire message.
199
To reply to an SMS Text message:
1. While the message is open, select Reply ( ).
2. Compose your reply or use the preset or recent
messages or icons.
Ⅲ
To type a message, use your keypad to enter your
message. Use to select a character input mode.
Ⅲ
To use a preset message, a recent message, or an
emoticon, select Options ( ) and select Preset
Msg (
), Recent Msg (
), or Emoticons (
).
Press the number on the keypad that corresponds
to the number next to the message or emoticon.
3. Select Next ( ).
4. Review your message and press Send ( ). (You may
also select the following additional messaging options
by pressing Options [ ]:
Ⅲ
Edit to edit the existing message before sending.
Ⅲ
Priority to set the message priority level
[Normal or Urgent].
Ⅲ
Ⅲ
Call Back # to set the callback number
Save to Drafts to save the message without sending.
200
Using Preset (Canned) Messages
Preset messages make sending text messages to your
friends, family, and co-workers easier than ever.
To add and/or edit preset messages:
1. Press Menu ( ) to access the main menu.
2. Select Messaging (
).
3. Select Settings (
).
4. Select Preset Messages (
).
5. Highlight an empty location and select Edit ( ).
– or –
Highlight a message you wish to edit and select
Edit ( ).
6. Enter your new message or changes and select Done
(
You may also add or edit preset messages in the “My
Online Tools” area at www.sprintpcs.com
Note:
201
VoiceSMS Messaging
Voice SMS allows you to send a recorded message any
other mobile phone or email address instantly. This allows
you to send a recorded message to others without having
to make a voice call.
To send a VoiceSMS message:
1. Press Menu ( ) to access the main menu.
2. Select Messaging (
).
).
3. Select VoiceSMS (
4. Select Options ( ) and press
5. Enter the Mobile number, Email @ address or select the
desired contact and press . (Repeat step until all
for Compose New.
recipients [up to 10] have been added.)
6. Select Next ( ).
7. Begin recording your message after the beep. To
pause recording, press . Press
again to resume.
When finished, press
for Done.
8. Select Send ( ).
9. Enter a name using the keypad to identify yourself
and select Done ( ).
Step 9 is only required on the first message to identify the
sender. Once the “From Name” information is saved, it can
be changed in the messaging settings.
Note:
202
10. Select Save ( ).
11. Select Continue ( ) to connect to PCS Vision
Services.
Handwriting Messages
This option allows you to send a digitized handwritten
picture message to others.
To send a new handwriting message:
1. Press Menu ( ) to access the main menu.
2. Select Messaging (
3. Select Send Message (
4. Select Hand. Msg (
).
).
).
5. Write a printed message in clear print on a white
piece of paper.
6. Using the screen as a view finder, aim the camera at
the handwritten message and select Capture ( ) or
press
.
7. Select Options ( ) and make all the necessary
adjustments to the digitized image. For more
information on the available options, see “Postcard”
8. Select Phone #, Email, Contacts, Other SVC., or Update List
and press
).
.
203
If Other SVC. or Update List was selected, follow the
instructions on screen.
Note:
9. Enter the mobile number or email address and press
.
10. Select Next ( ).
11. Select Send ( ).
Using Caller ID
Caller ID allows people to identify a caller before
answering the phone by displaying the number of the
incoming call. If you do not want your number displayed
when you make a call, just follow these easy steps.
To block your phone number from being displayed for a
specific outgoing call:
1. Press
.
2. Enter the number you want to call.
3. Press
.
To permanently block your number, call Sprint Customer
Service.
204
Responding to Call Waiting
When you’re on a call, Call Waiting alerts you of incoming
calls by sounding two beeps. Your phone’s screen informs
you that another call is coming in and displays the caller’s
phone number (if it is available and you are in digital
mode).
To respond to an incoming call while you’re on a call:
ᮣ
Press
answers the second call.)
To switch back to the first caller:
. (This puts the first caller on hold and
ᮣ
Press
again.
For those calls where you don’t want to be interrupted, you
can temporarily disable Call Waiting by pressing *70 before
placing your call. Call Waiting is automatically reactivated
once you end the call.
Tip:
205
Making a Three-Way Call
With Three-Way Calling, you can talk to two people at the
same time. When using this feature, the normal airtime
rates will be charged for each of the two calls.
To make a Three-Way Call:
1. Enter a number you wish to call and press
2. Once you have established the connection, enter the
second number you wish to call and press
. (This
.
puts the first caller on hold and dials the second
number.)
3. When you’re connected to the second party, press
again to begin your three-way call.
If one of the people you called hangs up during your call,
you and the remaining caller stay connected. If you
initiated the call and are the first to hang up, all three
callers are disconnected.
Call Waiting and Three-Way Calling are not available while
roaming off the Sprint Nationwide Network.
Note:
206
Using Call Forwarding
Call Forwarding lets you forward all your incoming calls to
another phone number – even when your phone is turned
off. You can continue to make calls from your phone when
Call Forwarding is activated.
To activate Call Forwarding:
1. Press
.
2. Enter the area code and phone number to which your
future calls should be forwarded.
3. Press
activation of Call Forwarding.)
To deactivate Call Forwarding:
. (You will hear a tone to confirm the
1. Press
.
2. Press
. (You will hear a tone to confirm the
deactivation.)
You are charged a higher rate for calls you have forwarded.
Note:
207
Viewing Missed Events
Missed events is a simple way of viewing all missed calls,
missed tasks, scheduler events, etc. A list is displayed on-
screen that allows you to scroll through all the events using
the navigation key.
To view missed events:
ᮣ
From the standby screen, press the navigation key up
to view the Missed Events screen.
208
Section 3B
SM
Sprint PCS Vision
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ SM
Sprint PCS Vision brings you clarity you can see and hear with
advanced multimedia services. These features – including
Sprint PCS Messaging, games, downloadable ringers and
screen savers, and portable Web access – are easy to learn
and use. Clearly, it’s a whole new way to look at wireless.
This section introduces these advanced services and walks
you through the necessary steps to start taking advantage of
Sprint PCS Vision Services.
Section 3B: Sprint PCS Vision
209
Sprint PCS Vision Applications
Here is a brief list of the applications available through
your Sprint PCS Vision Phone. For more information,
please see the Sprint PCS Vision User Guide online at
SM
Sprint PCS Picture Mail Take digital pictures with your
Sprint PCS Vision Picture Phone and send them to
email addresses or to other Sprint PCS Vision Phones.
Messaging Send and receive emails and chat on your
Sprint PCS Vision Phone.
Games Play exciting games with full-color graphics,
sound, and vibration. Choose from over 250 games to
play anytime.
Ringers Personalize your Sprint PCS Vision Phone by
downloading and assigning different ringers to
numbers in your contact list.
Screen Savers Download unique images to use as
screen savers – or make it easy to tell who’s calling by
assigning specific images to numbers in your contact
list.
Web Experience full-color graphic versions of popular
Web sites from your Sprint PCS Vision Phone.
210
Section 3B: Sprint PCS Vision
Getting Started With Sprint PCS Vision
With your Sprint PCS Vision Phone and Sprint PCS Service,
you are ready to start enjoying the advantages of Sprint PCS
Vision. This section will help you learn the basics of using
your Sprint PCS Vision services, including managing your
User name, launching a Vision connection, and navigating
the Web with your Sprint PCS Vision Phone.
Your User Name
When you buy a Sprint PCS Vision Phone and sign up for
service, you're automatically assigned a User name, which
is typically based on your name and a number, followed by
“@sprintpcs.com.” (For example, the third John Smith to
sign up for Sprint PCS Vision services might have
[email protected] as his User name.)
When you use Sprint PCS Vision services, your User name
is submitted to identify you to the Sprint Nationwide PCS
Network. The User name is also useful as an address for
Sprint PCS Mail, as a way to personalize Web services, and
as an online virtual identity.
Your User name will be automatically programmed into
your Sprint PCS Vision Phone. You don't have to enter it.
Section 3B: Sprint PCS Vision
211
Finding Your User Name
If you aren't sure what your Sprint PCS Vision User name
is, you can easily find it online or on your Sprint PCS Vision
Phone.
To find your User Name:
ⅷ
your Sprint PCS Phone number and Password. To
display your User name, click on the My Personal
Information menu, then click on PCS Vision User Name.
ⅷ
On your Sprint PCS Vision Phone. You can find your User
name under the Phone Info option in your phone's
Settings menu (Menu > Settings > Phone Info> Phone
Number).
212
Section 3B: Sprint PCS Vision
Launching a Sprint PCS Vision Connection
To launch a Sprint PCS Vision connection:
1. Press Menu ( ) to access the main menu.
2. Select Web (
). (Your Sprint PCS Vision connection
will launch and the Sprint PCS Vision home page will
display.)
The Sprint PCS Vision Home Page
OK (right softkey) to continue and launch the Web.
Note:
If you had a previous Sprint PCS Vision connection, the last
page you visited will display when you launch your
browser. When this occurs, you may not see the
“Connecting...” message when you launch the session.
Though the browser is open, you are not currently in an
active data session - that is, no data is being sent or
received. As soon as you navigate to another page, the
active session will launch and you will see the
“Connecting...” message.
Section 3B: Sprint PCS Vision
213
Net Guard
When you first connect to the Web, the Net Guard will
appear to confirm that you want to connect. This feature
helps you avoid accidental connections. You can disable
the Net Guard in the future by selecting Always Auto-
Connect when the Net Guard is displayed.
To change your Net Guard settings:
1. Press Menu ( ) to access the main menu.
2. Select Settings (
).
3. Select PCS Vision (
).
).
4. Select Net Guard (
Ⅲ
On to activate the Net Guard.
Ⅲ
Off to deactivate the Net Guard.
When enabled, the Net Guard appears only once per
session. The Net Guard does not appear if the phone is
merely re-connecting due to a time-out.
Note:
214
Section 3B: Sprint PCS Vision
Sprint PCS Vision Connection Status and
Indicators
Your phone's display lets you know the current status of
your Sprint PCS Vision connection through indicators
which appear at the top of the screen. The following
symbols are used:
Your Sprint PCS Vision connection is active (data is
being transferred); the transmit/receive symbol will
blink to indicate data transmission. Incoming voice
calls go directly to voicemail; outgoing voice calls
can be made, but the Sprint PCS Vision connection
will terminate.
Your Sprint PCS Vision connection is dormant (no
data is being sent or received). Though not currently
active, when dormant the phone can restart an
active connection quickly; voice calls can be made
and received.
Your phone is not currently able to access Sprint PCS
Vision service features.
If no indicator appears, your phone does not have a current
Sprint PCS Vision connection. To launch a connection, see
Section 3B: Sprint PCS Vision
215
Navigating the Web
Navigating through menus and Web sites during a
Sprint PCS Vision session is easy once you've learned
a few basics. Here are some tips for getting around:
Softkeys
During a Sprint PCS Vision session, the bottom line of your
phone's display contains one or more softkeys. These keys
are shortcut controls for navigating around the Web, and
they correspond to the softkey buttons directly below the
phone’s display screen.
Depending on which Web sites you visit, the labels on the
softkeys may change to indicate their function.
Tip:
To use softkeys:
Press the desired softkey button. (If an additional
ᮣ
pop-up menu appears when you press the softkey
button, select the menu items using your keypad [if
they’re numbered] or by highlighting the option and
pressing
.)
Scrolling
As with other parts of your phone's menu, you'll have to
scroll up and down to see everything on some Web sites.
To scroll line by line through Web sites:
ᮣ
Press the navigation key up and down.
To scroll page by page through Web sites:
ᮣ
Press the volume buttons on the side of the phone.
216
Section 3B: Sprint PCS Vision
Selecting
Once you've learned how to use softkeys and scroll, you
can start navigating the Web.
To select on-screen items:
ᮣ
Use the navigation key to highlight the desired item,
then press the desired softkey button (or press
).
You’ll find that the left softkey is used primarily for selecting
items. This softkey is often labeled “OK.”
Tip:
If the items on a page are numbered, you can use your
keypad (number keys) to select an item. (The tenth item in a
numbered list may be selected by pressing the 0 key on
your phone’s keypad, even though the number 0 doesn’t
appear on the screen.)
Links, which appear as underlined text, allow you to jump
to different Web pages, select special functions, or even
place phone calls.
To select links:
ᮣ
Highlight the link and press the appropriate softkey.
Going Back
To go back one page:
ᮣ
Press the
key on your phone.
The BACK key is also used for deleting text (like a
BACKSPACE key) when you are entering text.
Note:
Section 3B: Sprint PCS Vision
217
Going Home
To return to the Sprint PCS Vision home page from any other
Web page:
ᮣ
Press and hold
– or –
.
Press Menu ( ) and select Home (
).
Sprint PCS Messaging
Accessing Messaging
Now you can send and receive emails and text messages
and participate in Web-based chatrooms right from your
Sprint PCS Vision Phone. Messaging allows you to stay
connected to friends, family, and co-workers 24 hours a
day anywhere on the Sprint Nationwide PCS Network.
Message Types
There are many ways to message from your phone. These
Email, and Chat.
(Sprint PCS Voicemail provides voicemail-to-mailbox
messaging. For information on using your phone’s
voicemail feature, see “Using Voicemail” on page 188.)
218
Section 3B: Sprint PCS Vision
Accessing Sprint PCS Mail
Sprint PCS Mail allows you to perform many of the typical
email functions from your Sprint PCS Vision Phone that
you can from your personal computer. You can manage
your Sprint PCS Mail account from your Sprint PCS Vision
Phone or from your personal computer at
To access Sprint PCS Mail from your phone:
1. Press Menu ( ) to access the main menu.
2. Select Messaging (
).
3. Select Email (
). (If you’re a first-time user, your
phone will prompt you to set up your Sprint PCS Mail
account by establishing a User name and password.)
4. Select the folder you wish to view, such as Inbox (
or Compose (
).
)
For information and instructions about reading, replying to,
and composing Sprint PCS Mail, please see the Sprint PCS
Section 3B: Sprint PCS Vision
219
Accessing Additional Email Providers
With Sprint PCS Vision, you can use popular email services
®
®
such as AOL Mail, Yahoo! Mail, MSN Hotmail and
®
EarthLink to keep in touch, even while you’re on the go.
To access email providers from your Sprint PCS Vision
Phone:
1. From the Sprint PCS Vision home page, select
Messaging (
).
2. Select Email (
).
3. Select an email provider, such as PCS Mail, AOL Mail,
MSN Hotmail, Yahoo! Email, or Earthlink.
4. Use your keypad to enter the required sign-in
information for the selected provider, such as user
name, email address, and/or password, and select
Sign In. (Your mailbox for the selected provider will
display.)
The information required for sign in will vary depending on
the email provider you are accessing.
Note:
5. Follow the on-screen instructions to read, reply to,
compose, send, and manage your email account.
220
Section 3B: Sprint PCS Vision
Accessing Instant Messaging
Sprint PCS Vision also provides you with access to popular
®
instant messaging (IM) clients, including AOL Instant
TM
®
®
Messenger , MSN Messenger, and Yahoo! Messenger.
To access instant messaging clients from your Sprint PCS
Vision Phone:
1. From the Sprint PCS Vision home page, select
Messaging (
).
2. Select Instant Messaging (
).
3. Select an email provider, such as AOL Instant
Messenger, MSN Messenger, or Yahoo! Messenger.
4. Use your keypad to enter the required sign in
information for the selected provider, such as user
name and/or password, and select Sign On for AOL and
Sign In for Hotmail and Yahoo. (Your IM screen for the
selected provider will display.)
The information required for sign in will vary depending on
the instant messaging provider you are using.
Note:
5. Follow the on-screen instructions to read, reply to,
compose, send, and manage your IM account.
Section 3B: Sprint PCS Vision
221
Accessing Wireless Chatrooms
Sprint PCS Vision gives you the ability to join wireless
chatrooms from your Sprint PCS Vision Phone, to send text
messages and icons to chatroom participants, or to launch
a one-on-one (private) chatroom.
To access a chatroom from the browser:
1. Press Menu ( ) to access the main menu.
2. Select Web (
3. Select Messaging (
4. Select Chat (
).
).
).
5. Select Jumbuck (
). (You will see a disclaimer for
Wireless Chat.)
6. Select Agree ( ) to accept the disclaimer.
7. Use your keypad to enter a nickname and select Enter.
(The chat menu will display.)
8. Select a chatroom from the menu (for example,
“Friends” or “Singles”) and press Go ( ) to enter.
9. Once in the chatroom, you may scroll through the
postings to read messages from other chatroom
participants and use your keypad to enter your own
messages.
For information about posting to chatrooms or setting up
one-on-one sessions, please see the Sprint PCS Vision
Note:
222
Section 3B: Sprint PCS Vision
Downloading Premium Services
Content
With Sprint PCS Vision and your new Sprint PCS Vision
Phone, you have access to a dynamic variety of Premium
Service content, such as downloadable Games, Ringers,
Screen Savers, applications, and call tones. (Additional
charges may apply.) The basic steps required to access and
download Premium Service content are outlined below.
Accessing the Download Menus
To access the Sprint PCS Vision download menus:
1. Press Menu ( ) to access the main menu.
2. Select Downloads (
).
3. Select the type of file you wish to download (Games,
Ringers, Screen Savers, Applications, or Call Tones) and
press
.
If Call Tones is selected, you will be connected to the Sprint
PCS Vision network without having to select “Get New” as
described in step 4.
Note:
4. Select Get New and press
.
Section 3B: Sprint PCS Vision
223
To access the Sprint PCS Vision download menus from
the Web browser:
1. From the Sprint PCS Vision home page, select
Downloads (
).
2. Select Games (
), Ringers (
), Screen Savers
(
), or Applications ( ) to go to the
corresponding download menu. (For more
Selecting an Item to Download
You can search for available items to download in a
number of ways:
ⅷ
Featured displays a rotating selection of featured items.
ⅷ
Categories allows you to narrow your search to a
general category, such as Movie/TV Themes for Ringers
or College Logos for Screen Savers. (There may be
several pages of available content in a list. Select Next 9
to view additional items.)
ⅷ
Search allows you to use your keypad to enter search
criteria to locate an item. You may enter an entire word
or title or perform a partial-word search (for example,
entering “goo” returns “Good Ol’ Boy,” “The Good, the
Bad, and the Ugly,” and “Goofy - Club”).
224
Section 3B: Sprint PCS Vision
Downloading an Item
Once you’ve selected an item you wish to download,
highlight it and press
or press OK ( ). You will see a
summary page for the item including its title, the vendor,
the download detail, the file size, and the cost. Links allow
you to view the License Details page, which outlines the
price, license type, and length of license for the download,
and the Terms of Use page, which details the Premium
Services Terms of Use and your responsibility for payment.
To download a selected item:
1. From the information page, select Buy. (The item will
download automatically. When the New Download
screen appears, the item has been successfully
downloaded to your phone.)
If you have not previously purchased an item, you will be
prompted to create your purchasing profile.
Note:
2. Select an option to continue:
Ⅲ
Select Use ( ) to assign the downloaded item (or
to launch, in the case of a game or application).
Your Sprint PCS Vision session will end and you
will be redirected to the appropriate phone menu
screen.
Ⅲ
Ⅲ
Select Shop ( ) to browse for other items to
purchase and download.
Press
to quit the browser and return to
standby mode.
Section 3B: Sprint PCS Vision
225
Using My Content Manager
Whether you purchase your Premium Services content
from your Sprint PCS Phone or from your online account
purchases are stored in My Content Manager and may be
downloaded to your phone from there.
My Content Manager is a storage area on the enhanced
Sprint Nationwide PCS Network that is assigned
specifically to your account. It allows you to store all of
your Premium Service downloadable files. The files remain
in My Content Manager until their license terms have
expired – even after you have downloaded the content to
your phone. This provides you with a convenient place to
access information about your downloaded files without
having to store the information in your phone’s memory.
To access My Content Manager:
1. From the Sprint PCS Vision home page, select
Downloads (
).
2. Select My Content Manager (
).
To download purchased content from My Content Manager:
1. From the My Content Manager display (see above),
highlight the item you wish to download and
press
. (The information page for the selected
item will display.)
2. Scroll to highlight Download and press
. (The item
will download automatically. When the New
Download screen appears, the item has been
successfully downloaded to your phone.)
3. Select an option to continue:
226
Section 3B: Sprint PCS Vision
Ⅲ
Select Use (left softkey) to assign the downloaded
item (or to launch, in the case of a game or
application). Your Sprint PCS Vision session will
end and you will be redirected to the appropriate
phone menu screen.
Ⅲ
Ⅲ
Select Shop (right softkey) to browse for other
items to download.
Press
to quit the browser and return to
standby mode.
For complete information and instructions on downloading
Games, Ringers, Screen Savers, and Applications, see the
Section 3B: Sprint PCS Vision
227
Web
Exploring the Web
With Web access on your Sprint PCS Vision Phone, you can
browse full-color graphic versions of your favorite Web
sites, making it easier than ever to stay informed while on
the go. Follow sports scores and breaking news and
weather and shop on your Sprint PCS Vision Phone
anywhere on the Sprint Nationwide PCS Network.
In addition to the features already covered in this section,
the Sprint PCS Vision home page offers access to these
colorful, graphically rich Web categories, including News,
Weather, Entertainment, Sports, Finance, Travel, Shopping, Tools,
and Business Links, as well as useful management options
including My Account and Search. Many sites are available
under more than one menu – choose the one that's most
convenient for you.
Using the Browser Menu
Navigating the Web from your phone using the Sprint PCS
Vision home page is easy once you get the hang of it. For
details on how to navigate the Web, select menu items, and
Although the Sprint PCS Vision home page offers a broad
and convenient array of sites and services for you to
browse, not all sites are represented, and certain functions,
such as going directly to specific Web sites, are not
available. For these and other functions, you will need to
use the browser menu. The browser menu offers
228
Section 3B: Sprint PCS Vision
additional functionality to expand your use of the Web on
your Sprint PCS Vision Phone.
Opening the Browser Menu
The browser menu may be opened anytime you have an
active Sprint PCS Vision session, from any page you are
viewing.
To open the browser menu:
ᮣ
Press the right softkey. (The browser menu will
display in a drop-down list.)
Options available under the browser menu include:
ⅷ
ⅷ
ⅷ
ⅷ
Home Returns the browser to the Sprint PCS Vision
home page.
Forward Returns you to a previously viewed page (after
having used the
key).
Mark this Page Creates a new bookmark for the current
page.
View Bookmarks Allows you to bookmark the current
site, access bookmarked sites, and manage your
bookmarks.
ⅷ
ⅷ
Search Launches a Google search.
History Keeps a list of links to your most recently visited
sites. To navigate to a site, highlight it and press
,
then select Connect.
ⅷ
Go to URL. Allows you to navigate directly to a Web site
by entering its URL (Web site address).
ⅷ
ⅷ
Show URL Displays the URL of the page being displayed.
Refresh this page Reloads the current Web page.
Section 3B: Sprint PCS Vision
229
ⅷ
About Browser Displays technical information about the
browser, its version, and the encryption version, and
provides links to Certificate Information for the various
components.
ⅷ
ⅷ
Restart Browser Restarts the browser application.
Preferences Displays the following advanced options:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Edit homepage URL Allows you to change your
browser’s home page.
Revert to default homepage URL Changes the current
homepage back to the default homepage URL.
Image Display Allows you to turn on or off images
displayed in the browser.
Cookies Allows you to clear the cookies set in the
browser.
Creating a Bookmark
Bookmarks allow you to store the address of your favorite
Web sites for easy access at a later time.
To create a bookmark:
1. Go to the Web page you want to mark.
2. Press
to open the browser menu.
3. Select Mark this Page (
).
4. Select Save ( ).
Bookmarking a page does not store the page contents, just
its address.
Note:
Some pages cannot be bookmarked. Whether a particular
web page may be marked is controlled by its creator.
230
Section 3B: Sprint PCS Vision
Accessing a Bookmark
To access a bookmark:
1. Press
to open the browser menu.
2. Select View Bookmarks (
).
3. Scroll to highlight the bookmark you’d like to access
and select Goto ( ) to go to the Web site (or press
the number corresponding to the bookmark you wish
to access).
Deleting a Bookmark
To delete a bookmark:
1. Press
to open the browser menu.
).
2. Select View Bookmarks (
3. Scroll to highlight the bookmark you’d like to delete
and select Options ( ).
4. Select Delete (
).
5. Select OK ( ) to remove the bookmark.
Section 3B: Sprint PCS Vision
231
Going to a Specific Web site
To go to a particular Web site by entering a URL (Web site
address):
1. Press
to open the browser menu.
2. Select Go to URL (
3. Use your keypad to enter the URL of the Web site you
wish to go to and press
4. Press again to go to the Web site.
).
.
Not all Web sites are viewable on your phone.
Note:
Reloading a Web Page
To reload (refresh) a Web page:
1. Press
to open the browser menu.
2. Select Refresh this page (
). (The browser will
reload the current Web page.)
Restarting the Web Browser
If the Web browser appears to be malfunctioning or stops
responding, you can usually fix the problem by simply
restarting the browser.
To restart the Web browser:
1. Press
2. Select More (
3. Select Restart Browser (
to open the browser menu.
).
).
232
Section 3B: Sprint PCS Vision
Sprint PCS Vision FAQs
How will I know when my phone is ready for Sprint PCS
Vision service?
display in the phone number under Phone Info. listing in
your phone’s Settings menu.
How do I sign-in for the first time?
You are automatically signed in to access Sprint PCS Vision
services when you turn on your phone.
How do I know when my phone is connected to Sprint PCS
Vision services?
Your phone automatically connects when Sprint PCS
Vision service is used or an incoming message arrives. Your
phone will also display the
screen.
icon at the top of the
Can I make calls and use Sprint PCS Vision services at the
same time?
You cannot use voice and Sprint PCS Vision services
simultaneously. If you receive a call while Sprint PCS Vision
service is active, the call will be forwarded to voicemail.
You can place an outgoing call anytime, but it will
interrupt any in-progress Sprint PCS Vision session.
When is my data connection active?
Your connection is active when data is being transferred.
Outgoing calls are allowed; incoming calls go directly to
voicemail. When active, the
phone’s display screen.
indicator flashes on your
Section 3B: Sprint PCS Vision
233
When is my data connection dormant?
If no data is received for 10 seconds, the connection goes
dormant. When the connection is dormant, voice calls are
allowed. (The connection may become active again
quickly.) If no data is received for an extended period of
time, the connection will terminate.
Can I sign out of data services?
You can sign out without turning off your phone; however,
you will not be able to browse the Web or use other
Sprint PCS Vision services. While signed out, you can still
place or receive phone calls, check voicemail, and use
other voice services. You may sign in again at any time. To
sign out, go to Menu ( ) > Settings (
) > PCS Vision
(
) > Disable Vision (
) in your phone’s menu.
234
Section 3B: Sprint PCS Vision
Section 3C
Sprint PCS Voice CommandSM
In This Section
ࡗ ࡗ ࡗ ࡗ With Sprint PCS, reaching your friends, family, and co-
workers has never been easier – especially when you’re on
the go. You can even listen to Web-based information, such
as news, weather, and sports. Your voice does it all with
Sprint PCS Voice Command.
This section outlines the Sprint PCS Voice Command
service.
Section 3C: Sprint PCS Voice Command
235
Getting Started With Sprint PCS
Voice Command
With Sprint PCS Voice Command:
ⅷ
You can store all your contacts’ phone numbers, so you
can simply say the name of the person you want to call.
ⅷ
There’s no need to punch in a lot of numbers,
memorize voicemail passwords, or try to dial while
you’re driving.
ⅷ
ⅷ
You can call anyone in your address book – even if you
don’t remember their phone number.
You don’t need to worry about losing your contacts or
address book. This advanced service is network-based,
so if you switch or happen to lose your Sprint PCS
Phone, you won’t lose your contacts or address book.
It’s Easy to Get Started
There are two easy ways to sign up for Sprint PCS Voice
Command:
ᮣ
Sign up when you purchase and activate your phone.
ᮣ
Just dial
from your Sprint PCS Phone to
contact Sprint Customer Service and sign up.
There is a monthly charge for Sprint PCS Voice Command.
236
Section 3C: Sprint PCS Voice Command
Creating Your Own Address Book
You can program up to 500 names into your Sprint personal
address book, with each name having up to five phone
numbers. That’s 2,500 phone numbers, and with the
advancedtechnologyof SprintPCSVoiceCommand,youcan
have instant access to all of them.
There are four ways to update your address book:
ⅷ
with your Sprint PCS Phone Number and password to
access a fully functional Web-based address book to
create and update your contacts.
ⅷ
Use an Existing Address Book. Automatically merge
address books from desktop software applications with
Sprint SyncSM Services for no additional charge. Simply
click on the “Click to synchronize” button within your
Sprint PCS Voice Command personal address book at
ⅷ
Use Voice Recordings. Simply dial
and say, “Add
name.” You will then be asked to say the name and
number you want to add to your personal address
book. Your address book can store up to 20 voice
recorded names at once.
ⅷ
Call Directory Assistance. If you don’t have a computer or
Internet access handy, you can have Sprint PCS
Directory Assistance look up phone numbers for you
and automatically add them to your address book. Just
dial
and say “Call operator” and we’ll add two
names and all the numbers associated with those
names to your address book for our standard directory
assistance charge.
Section 3C: Sprint PCS Voice Command
237
Making a Call With Sprint PCS
Voice Command
To make a call with Sprint PCS Voice Command:
1. Press
and you’ll hear the “Ready” prompt.
2. After the “Ready” prompt, simply say, in a natural
voice, “Call” and the name of the person or the
number you’d like to call. (For example, you can say,
“Call Jane Smith at work,” “Call John Baker on the
mobile phone,” “Call 555-1234,” or “Call Bob Miller.”)
3. Your request will be repeated and you will be asked
to verify. Say “Yes” to call the number or person. (The
number will automatically be dialed.) Say “No” if you
wish to cancel.
Keep in mind that Sprint PCS Voice Command recognizes
not only your voice, but any voice, so that others can
experience the same convenience if they use your phone.
Tip:
FormorehelpfulhintsonSprintPCSVoiceCommand,including
a list of recognized commands and an interactive tutorial, visit
238
Section 3C: Sprint PCS Voice Command
Accessing Information Using
Sprint PCS Voice Command
To access information using Sprint PCS Voice Command:
1. Press
.
2. Say “Call the Web” and choose from a listing of
information categories like news, weather, and
sports.
– or –
Simply say “Call news room,” “Call the weather,” “Call
Sports Central,” etc.
Sprint PCS Voice Command is not available while roaming
off the Sprint Nationwide PCS Network.
Note:
Section 3C: Sprint PCS Voice Command
239
240
242
Getting the Most Out of Your Reception
Keeping Tabs on Signal Strength
The quality of each call you make or receive depends on the signal
strength in your area. Your phone informs you of the current signal
strength by displaying a number of bars next to the signal strength icon.
The more bars displayed, the stronger the signal. If you’re inside a
building, being near a window may give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of searching, a
Power Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability; you can also check it yourself
by pressing any key. Anytime the Power Save feature is activated, a
message is displayed on the screen. When a signal is found, your phone
returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it’s
turned on, it receives and transmits radiofrequency (RF) signals. When
you use your phone, the system handling your call controls the power
level. This power can range from 0.006 watts to 0.2 watts in digital
mode.
Knowing Radio Frequency Safety
The design of your Sprint PCS Phone complies with updated NCRP
standards described below.
In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE)
and the American National Standards Institute (ANSI) joined in
updating ANSI’s 1982 standard for safety levels with respect to human
exposure to RF signals. More than 120 scientists, engineers and
physicians from universities, government health agencies and
industries developed this updated standard after reviewing the
available body of research. In 1993, the Federal Communications
Commission (FCC) adopted this updated standard in a regulation. In
August 1996, the FCC adopted hybrid standard consisting of the
existing ANSI/IEEE standard and the guidelines published by the
National Council of Radiation Protection and Measurements (NCRP).
244
Maintaining Your Phone’s Peak Performance
There are several simple guidelines to operating your phone properly
and maintaining safe, satisfactory service.
ⅷ
ⅷ
Speak directly into the mouthpiece.
Avoid exposing your phone and accessories to rain or liquid spills.
If your phone does get wet, immediately turn the power off and
remove the battery.
ⅷ
Blocking the internal antenna located in the upper right corner
will reduce signal performance.
For the best care of your phone, only Sprint authorized personnel
should service your phone and accessories. Faulty service may void
the warranty.
Note:
Maintaining Safe Use of and Access to
Your Phone
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO
SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE
Using Your Phone While Driving
Talking on your phone while driving (or operating the phone without
a hands-free device) is prohibited in some jurisdictions. Laws vary as to
specific restrictions. Remember that safety always comes first.
Purchase an optional hands-free accessory at your local Sprint
Store, or call the Sprint PCS Accessory Hotline at 1-800-974-2221
or by dialing #222 on your Sprint PCS Phone.
Tip:
SM
Following Safety Guidelines
To operate your phone safely and efficiently, always follow any special
regulations in a given area. Turn your phone off in areas where use is
forbidden or when it may cause interference or danger.
245
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radiofrequency
(RF) signals. However, RF signals from wireless phones may affect
inadequately shielded electronic equipment.
RF signals may affect improperly installed or inadequately shielded
electronic operating systems and/or entertainment systems in motor
vehicles. Check with the manufacturer or their representative to
determine if these systems are adequately shielded from external RF
signals. Also check with the manufacturer regarding any equipment
that has been added to your vehicle.
Consult the manufacturer of any personal medical devices, such as
pacemakers and hearing aids, to determine if they are adequately
shielded from external RF signals.
Always turn off the phone in health care facilities and request
permission before using the phone near medical equipment.
Note:
Turning Off Your Phone Before Flying
Turn off your phone before boarding any aircraft. To prevent possible
interference with aircraft systems, the U.S. Federal Aviation
Administration (FAA) regulations require you to have permission from
a crew member to use your phone while the plane is on the ground.
To prevent any risk of interference, FCC regulations prohibit using
your phone while the plane is in the air.
Turning Off Your Phone in Dangerous Areas
To avoid interfering with blasting operations, turn your phone off
when in a blasting area or in other areas with signs indicating two-way
radios should be turned off. Construction crews often use remote-
control RF devices to set off explosives.
Turn your phone off when you're in any area that has a potentially
explosive atmosphere. Although it's rare, your phone and accessories
could generate sparks. Sparks can cause an explosion or fire, resulting
in bodily injury or even death. These areas are often, but not always,
clearly marked. They include:
ⅷ
Fueling areas such as gas stations.
Below deck on boats.
ⅷ
246
ⅷ
ⅷ
Fuel or chemical transfer or storage facilities.
Areas where the air contains chemicals or particles such as grain,
dust, or metal powders.
ⅷ
Any other area where you would normally be advised to turn off
your vehicle’s engine.
Never transport or store flammable gas, liquid or explosives in the
compartment of your vehicle that contains your phone or
accessories.
Note:
Restricting Children’s Access to Your Phone
Your phone is not a toy. Do not allow children to play with it as they
could hurt themselves and others, damage the phone or make calls
that increase your Sprint PCS Invoice.
Caring for the Battery
Protecting Your Battery
The guidelines listed below help you get the most out of your battery’s
performance.
ⅷ
Use only Sprint-approved batteries and battery chargers. These
chargers are designed to maximize battery life. Using other
batteries or chargers voids your warranty and may cause damage.
ⅷ
ⅷ
In order to avoid damage, charge the battery only in temperatures
that range from 32º F to 113º F (0º C to 45º C).
Don’t use the battery charger in direct sunlight or in high humidity
areas, such as the bathroom.
ⅷ
ⅷ
Never dispose of the battery by incineration.
Keep the metal contacts on top of the battery clean.
Don’t attempt to disassemble or short-circuit the battery.
ⅷ
ⅷ
The battery may need recharging if it has not been used for a long
period of time.
247
ⅷ
ⅷ
It’s best to replace the battery when it no longer provides
acceptable performance. It can be recharged hundreds of times
before it needs replacing.
Don’t store the battery in high temperature areas for long periods
of time. It’s best to follow these storage rules:
Less than one month:
4º F to 140º F (-20º C to 60º C)
More than one month:
4º F to 113º F (-20º C to 45º C)
Disposal of Lithium Ion (Li-Ion) Batteries
For safe disposal options of your Li-Ion batteries, contact your nearest
Sprint authorized service center.
Special Note: Be sure to dispose of your battery properly. In some
areas, the disposal of batteries in household or business trash may
be prohibited..
For safety, do not handle a damaged or leaking Li-Ion battery.
Note:
248
Acknowledging Special Precautions and
the FCC Notice
FCC Notice
This phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to stop
using the phone if such interference cannot be eliminated.
Vehicles using liquefied petroleum gas (propane or butane) must
comply with the National Fire Protection Standard (NFPA-58). For a
copy of this standard, contact the National Fire Protections
Association, One Batterymarch Park, Quincy, MA 02269, Attn.:
Publication Sales Division.
Cautions
Any changes or modifications to your phone not expressly approved in
this document could void your warranty for this equipment and void
your authority to operate this equipment. Only use approved batteries,
antennas and chargers. The use of any unauthorized accessories may
be dangerous and void the phone warranty if said accessories cause
damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending or
sitting on it.
Body-Worn Operation
To maintain compliance with FCC RF exposure guidelines, if you wear
a handset on your body, use the Sprint supplied or approved carrying
case, holster or other body-worn accessory. Use of non-Sprint
approved accessories may violate FCC RF exposure guidelines.
For more information about RF exposure, visit the FCC Website at
Specific Absorption Rates (SAR) for Wireless Phones
The SAR is a value that corresponds to the relative amount of RF
energy absorbed in the head of a user of a wireless handset.
249
The SAR value of a phone is the result of an extensive testing,
measuring and calculation process. It does not represent how much RF
the phone emits. All phone models are tested at their highest value in
strict laboratory settings. But when in operation, the SAR of a phone
can be substantially less than the level reported to the FCC. This is
because of a variety of factors including its proximity to a base station
antenna, phone design and other factors. What is important to
remember is that each phone meets strict federal guidelines. Variations
in SARs do not represent a variation in safety.
All phones must meet the federal standard, which incorporates a
substantial margin of safety. As stated above, variations in SAR values
between different model phones do not mean variations in safety. SAR
values at or below the federal standard of 1.6 W/kg are considered safe
for use by the public.
The highest reported SAR values of the Sprint PCS VisionSM Picture
Phone® PM-A840 by Samsung® are:
AMPSmode(Part22):
Head: 0.777 W/kg; Body-worn: 0.849W/kg
SprintPCSmode(Part24):
Head:1.29W/kg; Body-worn: 0.292 W/kg
FCC Radiofrequency Emission
This phone meets the FCC Radiofrequency Emission Guidelines.
FCC ID number: A3LSPHA840. More information
on the phone's SAR can be found from the following FCC Website:
250
Owner’s Record
The model number, regulatory number and serial number are located
on a nameplate inside the battery compartment. Record the serial
number in the space provided below. This will be helpful if you need
to contact us about your phone in the future.
SM
®
Model: Sprint PCS Vision Picture Phone PM-A840 by Samsung
Serial No.:
Phone Guide Proprietary Notice
CDMA Technology is licensed by QUALCOMM Incorporated under one
or more of the following patents:
4,901,307 5,109,390 5,267,262 5,416,797
5,506,865 5,544,196 5,657,420 5,101,501
5,267,261 5,414,796 5,504,773 5,535,239
5,600,754 5,778,338 5,228,054 5,337,338
5,710,784 5,056,109 5,568,483 5,659,569
5,490,165 5,511,073
T9 Text Input is licensed by Tegic Communications and is covered by
U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other
patents pending.
Phone Guide template version 4A (November 2004)
251
252
Section 4B
Manufacturer’s Warranty
In This Section
ࡗ Your Sprint PCS Phone has been designed to provide you with
reliable, worry-free service. If for any reason you have a
problem with your equipment, please refer to the
manufacturer’s warranty in this section.
For information regarding the terms and conditions of
service for your Sprint PCS Phone, please visit
www.sprintpcs.com and click on the “Terms & Conditions”
link at the bottom or call Sprint PCS Customer Solutions at
1-888-211-4PCS.
253
Manufacturer’s Warranty
STANDARD LIMITED WARRANTY
What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, L.P.
(“SAMSUNG”) warrants to the original purchaser (“Purchaser”) that SAMSUNG's Phones and
accessories (“Products”) are free from defects in material and workmanship under normal use
and service for the period commencing upon the date of purchase and continuing for the
following specified period of time after that date:
Phone
1 Year
1 Year
Batteries
Leather Case/Pouch/Holster
Game Pad
90Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon proper use of Product by
Purchaser. This Limited Warranty does not cover: (a) defects or damage resulting from
accident, misuse, abuse, neglect, unusual physical, electrical or electromechanical stress, or
modification of any part of Product, including antenna, or cosmetic damage; (b) equipment
that has the serial number removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to normal use; (d) malfunctions
resulting from the use of Product in conjunction with accessories, products, or ancillary/
peripheral equipment not furnished or approved by SAMSUNG; (e) defects or damage from
improper testing, operation, maintenance, installation, or adjustment; (f) installation,
maintenance, and service of Product, or (g) Product used or purchased outside the United
States or Canada. This Limited Warranty covers batteries only if battery capacity falls below 80%
of rated capacity or the battery leaks, and this Limited Warranty does not cover any battery if (i)
the battery has been charged by a battery charger not specified or approved by SAMSUNG for
charging the battery, (ii) any of the seals on the battery are broken or show evidence of
254
tampering, or (iii) the battery has been used in equipment other than the SAMSUNG phone for
which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty period, SAMSUNG will
repair or replace, at SAMSUNG's sole option, without charge to Purchaser, any defective
component part of Product. To obtain service under this Limited Warranty, Purchaser must
return Product to an authorized phone service facility in an adequate container for shipping,
accompanied by Purchaser's sales receipt or comparable substitute proof of sale showing the
date of purchase, the serial number of Product and the sellers' name and address. To obtain
assistance on where to deliver the Product, call Samsung Customer Care at 1-888-987-4357.
Upon receipt, SAMSUNG will promptly repair or replace the defective Product. SAMSUNG
may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt, reconditioned or new Product.
Repaired/replaced leather cases, pouches and holsters will be warranted for a period of ninety
(90) days. All other repaired/replaced Product will be warranted for a period equal to the
remainder of the original Limited Warranty on the original Product or for 90 days, whichever is
longer. All replaced parts, components, boards and equipment shall become the property of
SAMSUNG. If SAMSUNG determines that any Product is not covered by this Limited Warranty,
Purchaser must pay all parts, shipping, and labor charges for the repair or return of such
Product.
What Are the Limits On SAMSUNG's Liability? EXCEPT AS SET FORTH IN THE EXPRESS
WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE PRODUCT “AS IS,” AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
“THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR
PURPOSE OR USE;
“WARRANTIES OF TITLE OR NON-INFRINGEMENT;
“DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
255
“THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN;
OR
“COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO
CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY
OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED TO
THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM
THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE PRODUCT OR ARISING
DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF USE OF THE PRODUCT OR FROM
THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR
GROSS NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES,
OR FOR ANY BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST
PURCHASER BY ANY OTHER PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER
OF THIS PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF
THIS LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY
LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY
ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
256
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE THIRD-PARTY SOFTWARE OR
EQUIPMENT IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO WARRANTIES
OR REPRESENTATIONS AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR EQUIPMENT,
WHETHER SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE
PRODUCT DISTRIBUTED BY SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT. THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-
PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT
VENDOR, OWNER OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS
THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG, and
SAMSUNG's Product pricing reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees, distributors, and dealers of
SAMSUNG are not authorized to make modifications to this Limited Warranty, or make
additional warranties binding on SAMSUNG. Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written, do not constitute warranties by
SAMSUNG and should not be relied upon.
Samsung Telecommunications America, L.P.
1301 E. Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2005 Samsung Telecommunications America. All rights reserved.
No reproduction in whole or in part allowed without prior written approval.
Specifications and availability subject to change without notice. [011604]
257
Index
Call Waiting 205
- Adding a Phone Number
Erasing 81
Contacts - Adding an Entry
Contacts - Editing a Phone
Numerics
3-Way Calling 206
A
Activating Voice
Airplane Mode 68
Alarm Clock 136
Auto-Answer Mode 73
B
Contacts - Finding Entries
Countdown 142
Browser Menu 228
D
Dialing Options 31
Display Language 74
Downloads
Sprint PCS Vision 223
C
Call Answer Mode 73
Call Guard 91
Erasing 117
E
Entering Text 45–49
ABC Mode 47
Prepending a Phone
259
PresetMessages 49
Recent Messages 49
Symbols 48
Phone Number - With
Location Settings 64
Messaging Settings 65–
Pictures
Pictures - Erasing 83
I
K
Key Tones 56
L
Lock Code - Changing 77
Locking the Camera 78
Locking Your Phone 76
M
Making Calls 30
Menu Navigation 94
Messaging - Deleting Old
Messaging - Setting Alerts
Messaging - Signature 66
My Content Manager 226
R
Recent Messages 49
Roaming 87–92
S
N
Security Menu 76
Silence All 58
P
Phone Number - Displaying
SMS Text Messaging 198–
260
Sprint PCS Voice Command
Sprint Customer Service 7
Sprint PCS Mail 219
Sprint PCS Picture Mail -
Downloading Pictures 183
Sprint PCS Picture Mail -
Sprint PCS Picture Mail -
Sprint PCS Picture Mail -
Uploading Pictures 182
Sprint PCS Picture Mail -
T
Text Greeting 59
Three-Way Calling 206
Turning Your Phone On and
Off 24
U
Sprint PCS Service
Dialing Sprint PCS
Services 129
Operator Services 9
Applications 210
V
Voice Services 145–161
Voicemail
Volume 57
FAQs 233
W
Warranty 254
Wireless Postcard 166
Messaging 218
My Content Manager 226
261
|