P O R T A B L E
M O B I L E
Q u a d - B A N D
P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and other
patents pending.
®
ACCESS and NetFront™ are trademarks or registered trademarks of ACCESS Co., Ltd. in Japan and other countries.
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
microSD™ and the microSD logo are Trademarks of the SD Card Association.
®
Openwave is a registered Trademark of Openwave, Inc.
Some software components of this product incorporate source code covered under GNU General Public License (GPL), GNU Lesser
General Public License (LGPL), OpenSSL License, BSD License and other open source licenses. To obtain the source code covered under
the open source licenses, please visit:
.
The privacy and copyright laws of Canada govern the disclosure, reproduction and distribution of data, media and other content, including
music and video content. Certain activities, including downloads or transfer by any means (including, via cable, Bluetooth® or otherwise) of
such content may be an infringement of privacy or copyright law. Neither Samsung Electronics Canada Inc. nor any of its affiliates shall be
liable or responsible for any data or content disclosed, reproduced, downloaded or distributed by the user of this equipment.
Dynamic Noise Suppression from Audience™
Your phone is equipped with an advanced voice processing chip that delivers clear mobile calls by suppressing background noise,
intermittent sounds (like a siren or nearby conversation), and echoes, allowing you to hear and be heard nearly anywhere.
How Does It Work?
Based on the intelligence of the human hearing system, the technology:
•
•
Captures, evaluates and distinguishes all the sound signals surrounding your phone, and the person you're speaking with.
Then isolates the primary voice in conversation and filters out the background noise - so the person you're calling hears only your voice, without disturbing
background noise.
•
Dynamically equalizes and adjusts voice volume to optimize your calling experience, so you can hear clearly and don't need to speak louder to overcome
surrounding noise.
The noise suppression technology is built-in and already enabled in your new mobile phone. So it's ready to provide unsurpassed voice
clarity with every call.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT,
THE PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT
OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR
ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED
PROFITS OR BENEFITS.
Table of Contents
i
ii
iii
Section 1: Getting Started
This section describes the first steps to operating your phone.
SIM Card Information
When you subscribe for 3G cellular network services, you receive
a plug-in SIM (Subscriber Identity Module) card loaded with your
subscription details, such as your PIN, and available optional
services.
Activating Your Phone
Activating your phone requires several things: inserting the SIM
card, charging the battery, and turning on the phone.
If necessary, power-off the phone by pressing and holding
the key until the power-off image displays.
2. Use the grooves at the top of the cover to lift the cover up
and away from the back of the phone (1).
Removing the Battery
1. Use a coin or other object inserted in the slot on the back
cover (1) and turn it counter-clockwise to open the battery
cover (2).
Getting Started
1
3. Lift the battery up (1) and away (2) from the phone, as
2. Make sure to orient the SIM card with the gold contacts
facing down and the corner notch positioned as shown
below, then slide the SIM card completely into the socket.
shown.
Installing and Removing the SIM Card
3. To remove the SIM, gently slide it out of the socket.
Important!: The plug-in SIM card and its contacts can be easily damaged by
scratches or bending. Use caution when inserting or removing the
card, and keep all SIM cards out of reach of children.
Note: The angled corner of the SIM should be inserted as shown in the
previous diagram. Improperly inserting the SIM can cause the phone to
not recognize the SIM.
1. Remove the back cover and battery.
2
Installing the microSD™ Card
To add additional memory to your phone, you can insert a microSD
card into the memory card slot, located to the left of the SIM card,
inside the phone.
Incorrect
Use the following instructions and illustrations for proper insertion
and removal.
Note: The a847R supports microSD cards to a maximum size of 16GB. The
handset was also verified to support SanDisk™ microSD cards of up to
16GB and up to 5000 files.
Correct
1. Remove the back cover and battery.
2. Slide the microSD card into the slot as shown in the
Warning!: Please note the printed circuit side faces down when inserting the
card.
diagram.
3. To remove the microSD card, gently slide the card out of the
slot.
Getting Started
3
Replacing the Battery
1. To reinstall the battery, with the battery cover open, align the
battery tabs with the slots at the bottom of the phone (1).
Important!: When placing the cover back on the phone, press down firmly
along the edges to ensure that the cover is flush with the phone.
This will ensure that the battery compartment is pressurized and
that the phone is waterproof.
2. Press the battery down until it clicks into place (2). Make
sure the battery is properly installed before replacing the
cover.
3. With the battery in position on the phone, place the cover
back on the handset (1) then press down firmly (2). Press
down along the edges to make sure the cover is flush with
the phone and that there is a tight seal.
Note: The battery must be properly installed before charging the battery or
switching on the phone.
4. Turn the grooved dial clockwise until the cover locks.
4
2. Plug the adapter into a standard AC wall outlet.
Charging the Battery
Your phone is powered by a rechargeable Li-ion battery. Use the
travel adapter to charge the battery, and use only Samsung
approved batteries and chargers.
3. When the phone is completely charged (
), unplug the
adapter from the power outlet.
4. Remove the adapter from the phone by gently pulling the
connector out and replace the plastic cover back over the
open jack.
Note: You must fully charge the battery before using your phone for the first time.
A fully discharged battery requires up to 4 hours of charge time.
Caution!: For connection to an electrical supply not located in North America.,
you must use an adapter of the proper configuration for the power
outlet. Use of the wrong adapter could damage your phone and void
your warranty.
Note: During charging, you must unplug the adapter before removing the
battery from the phone to avoid damage.
Low Battery Indicator
1. Open the side slot and plug the connector of the travel
When the battery is weak and only a few minutes of talk time
remain, a warning tone sounds, the “Low Battery” message
repeats at regular intervals on the display, and the empty battery
adapter jack into the jack on the side of the phone.
icon (
) blinks. The backlight turns off to conserve the
remaining battery power.
Note: If your phone is in Silent Mode, the Low Battery Indicator defaults to
from Vibration to Mute, you will see a flashing message that indicates a
low battery.
If the battery level becomes too low, the phone automatically turns
off. Recharge your battery.
Getting Started
5
Turning the Phone On or Off
Setting Up Your Voicemail
1. Open the phone.
Note: If your service provider did not pre-configure your voicemail server
number, store the voicemail server number before accessing the server.
Your service provider can give you the number. For more information,
see “Changing the Voicemail Name and Number” below.
2. Press and hold the
key until the phone power-on
screen displays.
Setting Up Your Personal Options
Note: Do not turn on the phone when mobile phone use is prohibited.
1. Open the phone to access your keypad.
3. If the phone asks, enter the password and press the
2. In Idle mode, press and hold the
key.
Confirm soft key or the
key. For further details, see
3. Follow the voice mail prompts. If you need additional help
setting up your voice mail, contact your service provider.
The Idle screen displays while the phone searches for your
network. After the phone finds your network and displays
adequate signal strength bars, you can make or receive
calls.
Changing the Voicemail Name and Number
Your SIM card gives you the default service number of the voice
mail center. However, you may need to change the number. Use
the following procedures to change your voice mail number.
1. In Idle mode, press
to access Menu mode.
Note: The display language is preset to Automatic at the factory. To change
the language, use the Language menu. For more information, refer to
2. Highlight Messages and press the Select soft key or the
key.
4. When you wish to switch off the phone, press and hold the
3. Highlight Messages settings and press the Select soft key
key until the power-off image displays.
or the
key.
6
4. Highlight Voicemail and press the Select soft key or the
key.
5. Press the Edit soft key
.
6. To edit the Voice Server Name, highlight Name, press
to delete the current name and then use your
keypad to enter a replacement name.
7. To edit the Voice Mail Number, highlight Voice Mail Number
and press
to delete the current number.
Enter the new Voice Server number and press the Save soft
key or the
key to save this new number.
8. Press the
key to return to Idle mode.
Getting Started
7
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
displays the screen and the icons that are displayed when the
phone is in use.
Open View of Your Phone
The following illustrations show the main elements of your phone:
15
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many significant
features. The following list outlines a few of the features included
in your phone:
1
•
•
•
•
Bluetooth wireless access
Camera and camcorder
Instant Messaging capability
2
3
14
Featured applications provide alarms, calendar, calculator, record audio,
converter, timer, stopwatch, and world clock.
13
12
11
10
4
5
•
•
•
Multimedia Message Service (MMS)
Multimedia capability (with included Music Player)
Speakerphone capability
6
9
8
7
8
Keys
8. Special Function keys: Asterisk/Shift key
enters the
[ ] character for calling features. In text mode, press to
The following list correlates to the open and front view illustrations.
1. Main Display: This screen displays useful information
needed to operate your phone.
*
change the character input type. Press and hold
pause between numbers. Pound/Space key
to enter a
enters the
[ ] character for calling features. In text entry mode,
pound #
2. Navigation keys: This key allows you to scroll through
phone menu options and provides a shortcut to phone
functions from standby mode.
press to enter a space between characters. Press and hold
to activate/deactivate the Silent profile.
9. Alphanumeric keypad: Use these keys to enter numbers,
3. Soft key (left): Performs the functions indicated by the
letters and some special characters. When in Idle mode,
screen text on the bottom of the display.
press and hold the
server or press and hold
prefix.
key to access your voicemail
to enter an International call
4. Voice Recognition key: Launches the Nuance Voice
Recognition application.
5. Send key: Allows you to place or receive a call. In standby
mode, press the key once to access the Recent Call log. If you
press and hold the key down, you initiate the most recent call
from the Recent Call log. If the phone is off, press and hold this
key to turn the phone on.
10. Clear key: Deletes characters from the display when you
are in text entry mode. Deletes items when in an
application. When in a main menu, press to return to the
previous menu. In Idle mode, a quick press of the
displays the Calendar in Month view.
key
6. Voice Mail key: Press and hold the
key to
automatically dial your voicemail.
7. Microphone: Allows the other callers to hear you clearly
when you are speaking to them.
Understanding Your Phone
9
11. Power On/Off/Menu Exit key: Ends a call. Press and hold
this key for a few seconds to power your phone On or Off.
While in the main menu, it returns the phone to standby
mode and cancels your input. When you receive an
incoming call, press to reject call.
Closed View of Your Phone
7
6
1
2
12. Multitasking key: Opens the application switch window
which allows you to select from a group of different
applications without having to exit from the currently active
application. These options include making a voice call,
messaging, Mobile Web launch, launching the music player,
and accessing games.
5
4
3
13. Soft key (right): Performs the functions indicated by the
Keys
screen text on the bottom of the display.
The following list correlates to the side view illustrations.
14. Menu access/Confirm key: When navigating through a
menu accepts the highlighted choice in the menu. If you
press once in Idle mode, it opens the main menu.
1. Camera key: Press to display open the Camera application.
2. Volume keys/Menu Navigation: Allows you to adjust the
ringer volume in standby mode or adjust the voice volume
during a call. Press either key to mute the ringer during an
incoming call. Can also be used to scroll up or down to
navigate through menu options. When the phone is closed,
15. Earpiece: Used to listen to callers.
10
press and hold to toggle the display on or off. If you are
playing music and the backlight goes out, press to re-
display the music player screen.
Back Light
A back light illuminates the display and the keypad when you
press any key or open the phone. It turns off when no keys are
pressed within a given period of time, and/or dims the light,
depending on the settings in the Backlight Time menu.
3. Camera/Camcorder: Allows you to take pictures and
videos with your phone.
Main Display Layout
The display has 4 areas:
4. Front Display: Notifies you of an incoming call or message.
It also displays date, time, network type, signal strength,
and battery power icons, and any icons associated with
alerts or alarms.
Icons
Date
5. Headset jack/Adapter jack: Allows you to connect the
travel adapter (power), optional PC connection cable (data
transfer), and optional headset.
6. Speaker key: During a call, press this key to turn the
Text and graphic area
Soft key indicators
speakerphone on.
7. Speaker: used to listen to audio and music from your phone.
Understanding Your Phone
11
Icons
Displays when an alarm is set on your phone.
Shows the received signal strength. The greater the
number of bars, the stronger the signal.
Displays when your incoming phone calls are being
forwarded to another number.
Displays the level of your battery. The more bars you see,
the more power you have remaining.
Displays when you receive new voice mail message.
Displays when a new text message is received.
Displays when a new multimedia message is received.
DisplayswhenthephoneisaccessingservicesinaGPRS
network. When data is being transferred, this icon
animates.
Displays when the phone is accessing services in an
EDGE network. When data is being transferred, this icon
animates.
Displays when a push-message is received from the
WAP server.
Displays when the phone is accessing services in a 3G
(UMTS)network.Whendataisbeingtransferred,thisicon
animates.
Displays when a new Over the Air (OTA) software update
file is received.
Displays when your memory card is inserted.
Displays when a call is in progress.
Displays when Bluetooth wireless technology is active.
When transferring data, this icon blinks red and blue.
Displays when there is no network coverage available.
Whenyouareoutoftheservicearea, youcannotmakeor
receive voice calls.
12
Displays when Bluetooth wireless technology is
connecting with a device. It displays a solid red until the
connection is set, then changes to a solid blue.
Displays when the phone’s profile is set to Silent. In this
case, the speaker is muted and the phone only vibrates
and displays information on its front panel LCD.
DisplayswhenaBluetoothwirelessheadsetisactiveand
in use.
Displayswhenthephone’sprofileissettoDriving. Inthis
case, the speaker is active and launches the currently
selected ringtone or melody when the associated
notification is activated. This icon is accompanied on
screen by the Audio icon.
Displays when you are using the phone’s Music Player.
Displays when you are connected to a PC via a USB port.
Displayswhenthephone’sprofileissettoOutdoor.Inthis
case,thespeakerisactive,thevolumesettingsareraised
to their highest levels, any currently active ringtones or
melodiesareactivated, andthephone’svibratefeatureis
activated.
Displays when T-Coil is enabled. For more information,
Displays when Airplane mode is enabled. For more
My Menu
Your phone offers a set of functions that can be customized for
your ease and specific needs. These functions are arranged in
menus and sub-menus, accessed using the two soft keys. Each
menu and sub-menu allows you to view and alter the settings of a
particular function.
Note: The default phone profile is Normal. The profile is editable and the
displayed icons may vary according to the setting.
If you select the My Menu soft key in Idle mode, the following
displays under the title of My Menu:
Understanding Your Phone
13
•
•
•
•
•
IM: accesses your chosen instant messaging application
.
•
To view the next function or highlight the next option on a list, press the
Down Navigation key or the down Volume key on the left side of the
phone.
My Account: allows you to view your account information on the web.
Bluetooth: allows you to use the Bluetooth functionality of the device.
Ringtones: opens the Ringtones screen.
•
•
•
To move back to the previous function or option on a list, press the Up
Navigation key or the up Volume key on the left side of the phone.
To move back up one level in the menu structure, press the Back soft
key.
Ringbacks: opens the Internet browser and accesses ringbacks
available from your service provider.
•
•
Alarms: allows you to set or alter alarm settings, including a Wake-up
Alarm.
To exit the menu structure without changing the settings, press the
key.
Empty: (locations 7, 8, 9, 0, *, and #) allows you to program an additional
set of frequently used features.
Command Keys
Soft keys
–
–
Select an empty slot and press the
Use the Menu and Navigation keys to select a feature, then press the
key.
Functions for the soft keys are defined by what displays above
each in the display. There are two soft keys, the left soft key
and the right soft key
Assign soft key.
In some functions, you may be asked for a password or PIN. Enter
the code and press the Select soft key or the
.
key.
The roles of the soft keys vary depending on the function you are
currently using; the labels on the bottom line of the display just
above each key indicate their current role.
Selecting Options
To view the various functions and options available and to select
the one you want:
Left Soft key
•
•
Press the appropriate soft key.
Some functions of the left soft key are as follows.
To select the function displayed or the option highlighted, press the
•
In the Idle screen, press the Internet (left) soft key
to open the
Select soft key or the
key.
Internet browser.
•
When in a menu mode, the left soft key
function is Select.
14
Right Soft Key
•
•
Enter a number and briefly press
to make a call.
Briefly press
in standby mode to display a list of recent calls to and
Some functions of the right soft key are as follows.
from your phone.
•
In the Idle screen, press the My Menu (right) soft key
to open the
•
•
•
Press
Press
twice in standby mode to call the most recent number.
to pick up a waiting call.
My Menu screen.
•
When in a menu mode, the right soft key
function is Back.
Press and hold
to turn on your phone when the phone is off.
Clear Key
Navigation Key
•
If you enter an incorrect character, briefly press
to backspace
(and delete) the character.
Use the directional keys on the Navigation key to browse menus,
sub menus, and lists. Press the Up or Down Navigation keys
when jumping to highlighted links on the web.
•
•
•
To erase the entire sentence, press and hold
To back up one menu level, briefly press
.
.
In Idle mode, briefly press
calendar.
to display the Month view of your
Each key also acts as a shortcut to launch applications from the
Idle screen.
End Key
Camera
Use the End key
to turn on/off your phone, disconnect calls,
and return to the standby mode.
Call History
Create Message
•
•
•
Press and hold the End key
to turn on/off your phone.
Briefly press
Press
once to disconnect a call.
to return to standby mode from any menu.
Contacts
Send Key
Use the Send key
last number(s) dialed, received, or missed.
Press once to answer calls.
to answer calls, dial calls, and to recall the
•
Understanding Your Phone
15
Section 3: Menu Navigation
This section explains the menu navigation for your phone. It also
includes an outline of all the available menus associated with your
phone. Some menu options are controlled by the SIM provided by
your service provider.
Accessing a Menu Function by Scrolling
1. In Idle mode, press
and scroll using the Navigation
keys to reach a main menu item, Settings for example.
Press the Select soft key or the
key to enter the
Menu Navigation
Menus and sub-menus can be accessed by scrolling through them
using the Navigation keys or by using the shortcut keys.
menu.
2. If the menu contains sub-menus, Phone for example, you
can access them by first highlighting the option and then by
pressing the Select soft key or the
key. If the menu
you selected contains further options, repeat this step.
3. To scroll through these menus, press either the Up or Down
Navigation key or the Volume key (located on the left side
of your phone). Press the Select soft key or the
key to
make your selection.
4. To return to the previous menu level, press the Back soft
key ( ).
5. To exit the menu without changing the settings, press the
key.
16
Using Shortcut Numbers
My Menu
Numbered menu items, such as menus, sub-menus, and options
can be quickly accessed by using their shortcut numbers. In Menu
mode, Main Menus can be accessed by pressing the number keys
(1 to 0, * and #) corresponding to their location on the screen.
The My Menu option is another way to access applications from
Idle mode without navigating through the main menu icons and
sub menus. There are twelve available shortcuts, eight
preassigned (IM, My Account, Bluetooth, Tones, Ringbacks,
Alarms, and six empty shortcuts (7, 8, 9, 0, *, #) you can assign.
Example: Accessing the Messages Inbox.
To navigate to the shortcuts:
1. In Idle mode, press the My Menusoft key, and highlight a
shortcut application.
1. In Idle mode, press the
key.
2. Press the
key for Messages.
2. Press the
key to access the selected option.
3. Press the
key for Inbox.
– or –
The Messages Inbox is displayed.
Press the Options soft key and select one of the following:
• Open: open the selected shortcut and displays the submenus,
launches the selected application, or displays a screen.
• Change: changes the currently selected shortcut and assigns
another shortcut to this field.
• Remove: removes the selected shortcut from this field.
• Remove All: removes all the shortcuts from the fields in this
menu.
Menu Navigation
17
Section 4: Call Functions
This section describes how to make or answer a call. It also
includes the features and functionality associated with making or
answering a call.
Correcting an Entered Number
Use the following steps to correct a mis-typed entry when dialing.
1. After entering a number
Making a Call
When the Idle screen displays, enter the area code and phone
•
•
To clear the last digit displayed, press the
key.
To clear another digit in the number, press the Left or Right
Navigation key until the cursor is immediately to the right of the
number, and press the
key.
digit to clear. Press the
key.
Note: When you activate the Auto Redial option in the Voice Call menu, the
phone automatically redials up to 10 times when the person does not
answer the call or is already on the phone.
•
•
To enter a missing digit press the Left or Right Navigation key
until the cursor is in position and enter the digit.
To clear the whole display, press and hold the
key.
Making an International Call
2. Press the
key to return to the Idle screen.
1. Press and hold the
2. Enter the country code, area code, and phone number, then
press the key.
key. The + character displays.
Ending a Call
When you want to finish your call, briefly press the
close the phone.
key or
18
Manual Pause Dialing
2. Press the
key to call.
When you call automated systems, you are often required to enter
a password or account number. Instead of manually entering the
numbers each time, you can dial the numbers along with special
Dialing a Number From the Call History Menu
All incoming, outgoing and missed calls are listed in the Call
History menu. If the caller is listed in Contacts, the name
associated displays.
To access the Call History menu:
To manually call a number with pause(s) without storing it in your
Contacts list:
1. In Idle mode, press the
key.
2. Use the Right and Left Navigation keys to scroll through
the Call History options. Choose from All Calls, Missed
Calls, Calls Made, or Calls Received.
1. In Idle mode, enter a phone number.
2. Press and hold the
key to add a two-second pause.
The letter will appear where the pause has been set.
P
3. Scroll to the number to call and highlight to select. Press the
3. Continue to enter numbers if desired.
key to call.
Tip: You can create pauses longer than two seconds by entering multiple
P
Making a Call from Contacts
pauses.
You can store phone numbers that you use regularly on the SIM
card or in the phone’s memory. These entries are collectively
called Contacts.
Redialing the Last Number
To display the last number dialed:
Once a number is stored in Contacts, you can dial it by pressing a
few keys using the Speed Dial feature.
1. In Idle mode, press the
key to view the Call History
menu. The last number dialed displays as the first item in a
list of recent calls. If the caller is listed in Contacts, the name
associated displays.
Call Functions
19
Answering a Call
Call History
When you receive a call, the phone rings and displays the caller’s
phone number, or name if stored in Contacts.
All incoming, outgoing and missed calls are listed in the Call
History menu. If a number is associated with a name in Contacts,
the associated name displays.
1. From the Idle Screen press the
key.
To access the Call History menu:
If the Any Key option in the
Settings Calls
1. In Idle mode, press the
key.
General Call Answer menu is activated, you can press
2. Use the Right and Left Navigation keys to scroll through
the Call History options. Choose from All Calls, Missed
Calls, Calls Made, or Calls Received.
any key to answer a call except for the
key and the
Reject soft key.
If the Open Flip option in the
Settings Calls
3. Scroll to the number to call and highlight to select. Press the
General Call Answer menu is activated, you can
key to call.
answer the call by opening the phone.
Viewing All Calls
Note: To reject an incoming call, press and hold either Volume key on the left
side of the phone before opening the phone. A quick press of side
volume key silences the ringer on an incoming call.
From the Call History menu, select the All Calls option. All calls
made, received, and missed are listed. Press the Options soft key
for the following options:
2. Press the
key or close the phone to end the call.
•
Details: allows you to see the number of the sender, the date and time of
the call, the length of the call, and the contact’s name, if listed in your
Contact List.
Note: You can answer a call while using the Contacts or menu features. After
ending the call, the phone returns to the function screen you were using.
•
•
Voice Call: allows you to return the call automatically.
Save to Contacts: allows you to save the number to Contacts on either
the phone or SIM card.
20
•
Send Message: allows you to send a Text or Multimedia message to the
4. Highlight Details and press the
key.
caller.
Saving a Missed Call to Contacts
•
•
Delete: allows you to delete the Selected call or All calls.
To save the missed call entry to your address book, use the
following steps:
Add to Reject List: allows you to add the sending number to your Reject
List.
1. Press the View soft key. The most recently missed call
Viewing Missed Calls
displays.
The number of missed calls displays on both the Idle screen and
the front panel LCD. To view the number details:
2. With the missed call selected press the Options soft key.
1. If the phone is closed, open the phone and press the View
3. Highlight Save to Contacts and press the
4. Select the type New or Update and press the Select soft key
or the key.
key.
soft key. The most recently missed call displays.
Note: If there is a voicemail sent by the same number, associated icons are
displayed and can then be selected.
2. Scroll through the list of missed calls.
Sending a Message to a Missed Call
Viewing the Details of a Missed Calls
To send a text message or attachment to a missed call entry:
To view the details of a selected missed call, use the following
steps:
1. Press the View soft key.
2. Press the Options soft key. Use the Navigation keys to
select Send Message and press the Select soft key or the
key.
1. Press the View soft key. The most recently missed call
displays.
2. Scroll through the list of missed calls.
3. With the missed call selected, press the Options soft key.
Call Functions
21
3. At the Create Message screen, use the Alphanumeric keys to
type a message or press the Insert soft key to add items
such as Picture, Video, Sound, Templates, Emoticon, Take
Picture, Record Video, Record Sound, Favourites URL, or
Contact Info.
•
•
Selected: This option allows you to delete only selected call
entries.
All: This option allows you to delete all missed call entries.
4. At the “Delete?” prompt, press either the Yes soft key to
confirm the deletion or the No soft key to cancel.
5. Press the
key to exit the Missed Call feature.
4. Press the Send to soft key when you are done with your
Call Details
message
1. In Idle mode, press
Call History All Calls and
key.
5. At the Recipient List screen, use the numeric keypad to
press the Select soft key or the
add additional contact phone numbers, if necessary.
2. Highlight the desired call and press the Options soft key.
6. Press the Send soft key to initiate delivery.
3. Highlight Details and press the Select soft key or the
Note: When you Insert objects in your message, the setting automatically
key.
changes to Multimedia Message.
4. The following displays:
Deleting a Missed Call
• (Number of Calls) Contact Name / No Name: shows the number
of calls made to or received from this Contact or number.
To delete a missed call entry:
• Phone number: shows the phone number that made or received
the call(s).
1. Immediately after missing a call, press the View soft key.
2. Press the Options soft key. Use the Navigation keys to
select Delete and press the Select soft key or the
key.
• List of Calls to this Contact or number: For each call, the
following displays:
–
Time and Date: shows the time, day of the week, and date the call
was made or received.
3. Select the items to delete:
22
–
hh:mm:ss: shows the duration of the call in hours, minutes, and
seconds.
In Idle mode, you can also adjust the ringer volume using these
same keys.
Call Back
Putting a Call on Hold
To call back a missed call number:
1. Press the View soft key. The most recently missed call
displays.
You can place the current call on hold whenever you want. You
can also make another call while a call is in progress if your
network supports this service.
To place a call on hold:
2. Scroll through the list of missed calls.
1. While on a call, press Options soft key, highlight Hold and
3. Highlight the number to call back and press the Options
press the Select soft key or the
key. This action
soft key. Select Call and press the Select soft key or the
places the current caller on hold (which displays on the
screen as a grayed-out box).
key.
– or –
2. You can later reactivate this call whenever you want by
Highlight the number and press the
key.
pressing the Resume soft key.
Options During a Call
Your phone provides a number of control functions that you can
use during a call.
To make a new call while a call is in progress:
1. While on a call, press Options soft key, highlight Hold and
press the Select soft key or the
key.
Adjusting the Call Volume
2. Enter the new phone number you wish to dial or look it up in
During a call, if you want to adjust the earpiece volume, use the
Volume keys on the left side of the phone.
Contacts.
3. Press the
key to dial the second number.
Press the up Volume key to increase the volume level and the
down Volume key to decrease the level.
– or –
Call Functions
23
To end all calls:
Press Options soft key, highlight New call and press the
Select soft key or the
key. Once connected, both calls
2. Press the Options soft key. Press End All Calls to end
display on the screen.
all calls.
– or –
Note: The caller currently on hold displays as greyed text on the screen.
Press the
key.
When you are engaged in an active call and also have a call on
hold, you may switch between the two calls. Switching calls
automatically places the second call on hold.
In-Call Options
During a call, press the Options soft key to access the following:
•
•
•
•
Speaker on/off: Turns the speaker phone on or off.
Hold: Places the current call on hold.
To switch between the two calls:
1. Press Options soft key. Use the Navigation keys to
highlight Swap and press the Select soft key or the
key.
Contacts: Allows you to access your Contacts.
Noise Suppression on/off: Turns the Noise Suppression feature on or
off. Use this feature to help suppress background noise.
•
The current call (caller #2) is placed on hold and the previous call
on hold (caller #1) is reactivated so you can continue conversing
with that person.
Note: Noise Suppression is turned on in a voice call by default. If speaker,
wired head set or Bluetooth headset is used, Noise Suppression will be
turned off. Noise Suppression will need to be re-enabled in subsequent
voice calls. To re-enable in a call, press Options Noise Suppression
2. Press the
key to end the currently active call.
on.
To end a specific call:
•
•
•
New Call: Places the current call on hold and then allows you to enter
and dial another number.
1. Press the Options soft key. Press End Active Call or
End Held Call and press the Select soft key or the
key.
Send Message: Allows you to create and send a new Text message or
Multimedia Message.
More: allows you to select one of the following options:
24
–
–
–
Calendar: Temporarily accesses your calendar while maintaining the
active call.
Memo: Temporarily accesses your memos while maintaining the
active call.
Whisper Mode On/Off: Increases the microphone sensitivity level. Used
in quiet environments such as theaters, meetings, etc.
Key tone on/off: Silences/mutes the key tones when on the call.
Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to the
selected contacts. You can send these DTMF tones as a group, only if
the network supports this function. The DTMF tones are used in phones
for tone dialling, sounding when you press the number keys. This option
is helpful for entering a password or an account number when you call an
automated system, like a banking service.
Using the Speakerphone During an Active Call
While in an active call, it is possible to enable the speakerphone
feature.
1. Dial the number and press the
2. Press the key to activate the speakerphone when the
call is answered.
key.
–
–
3. Use the volume keys (located on the left side of your phone)
to adjust the volume.
Muting or Sending Keypad Tones
These options allow you to turn the key tones off or on. If the Key
tone off option is selected, it allows you to press keys without
hearing key tones during a call.
•
End Call: Allows you to end the active call.
If you are on a call, select the New Call option and dial another
number or answer another incoming call to place the active call on
hold.
Note: To communicate with answering machines or computerized telephone
systems, the Key tone option must be set to On in the Options More
menu.
When the second call activates, these options are available.
•
Swap: Places the active call on hold and then re-activates the call on
hold.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone off, so that
the other person cannot hear you.
•
Join: Joins all of the established calls (both active and on hold) into a
multi-party call.
Example: You wish to say something to person in the room, but do not want
Press the
key to end each call.
the person on the phone to hear you.
Call Functions
25
To switch the microphone off temporarily with a single active call:
1. Press the Mute soft key.
Call Waiting
2. Press the Unmute soft key to switch the microphone back
The Call Waiting feature allows you to answer an incoming call
while a call is in progress, (if this service is supported by the
network). You are notified of an incoming call with a Call Waiting
tone.
on.
To switch the microphone off temporarily with one active call and
one on hold, or, one active call with Video Share enabled.
1. Press the Options soft key, then select Mute
.
Note: To use this feature Call Waiting must be set to Activated
.
2. Press the Options soft key, then select Unmute to switch the
microphone back on.
To answer a call while a call is in progress:
1. Press the Accept soft key to answer the next incoming call.
Searching for a Number in Contacts
The first call is automatically placed on hold.
You can search for a number from Contacts during a call.
1. Press the Options soft key. Use the Navigation keys to
highlight Contacts and press the Select soft key or the
key.
2. To switch between the two calls, press Options Swap
and press the Select soft key or the
key.
•
Swap: Places the current call on hold and then activates the
previous call.
2. Highlight the Contacts entry by using the Up or Down
To end a call:
Navigation key.
– or –
1. Press the Options soft key. Highlight End and press the
Right Navigation key.
Enter the first few letters of the contact into the Search field
which then highlights the closest match in the Contacts list.
2. Highlight Active Call, Held Call, or All Calls and press the
Select soft key or the
key.
3. Press the View soft key.
26
3-Way Calling (Multi-Party Calling)
In Idle mode, press and hold the
and the Silent Profile on message and Silent mode icon
key until the phone vibrates
The 3-Way or Multi-Party feature allows you to answer a series of
incoming calls and place them on hold. If this service is supported
by the network, all calls can be joined together. You are notified of
an incoming call by a call waiting tone.
In Silent mode, your phone’s speakers are muted. With the flip
closed, an incoming call causes the phone to vibrate and light up
the external LCD display or just light the external LCD display,
depending on the settings of the Silent Phone Settings feature.
Note: The Join option combines all of the established calls (both active and on
hold). Swap places the current call on hold and then activates the
previous call.
To exit and reactivate the previous sound settings, press and hold
the
key again until Normal Profile on displays. The Silent
1. Press the Accept soft key to answer the first incoming call.
mode and Vibrate icons no longer display.
2. Press the Accept soft key to answer the next incoming call.
The first call is automatically put on hold.
3. Join the first two callers by pressing the Options soft key.
Use the Navigation keys to highlight Join and press the
Select soft key or the
key.
•
Join: combines your current set of callers into a single multi-party
call (both active and on hold).
4. Press the
key to end the call.
Silent Mode
Silent mode is convenient when you wish to stop the phone from
making any sound, in a theater for example.
Call Functions
27
Section 5: Entering Text
This section outlines how to select the desired text input mode
when entering characters into your phone. It also describes how to
use the T9 predictive text entry system to reduce the number of
key strokes associated with entering text.
T9 Predictive Text Input Method (T9 abc, T9 Abc, and T9
ABC)
This input method allows you to enter words with only one
keystroke per letter. Each key on the keypad has more than one
Using the Text Input Methods
letter; for example, pressing the
key can enter J, K, or L.
However, the T9 method automatically compares the series of
keystrokes you make with an internal linguistic dictionary to
determine the most likely word, thus requiring far fewer keystrokes
than the traditional Alphabetic mode. The T9 abc method makes
all characters lowercase. The T9 Abc method makes the initial
character an uppercase while the remaining characters are left as
lowercase. The T9 ABC method makes all characters uppercase.
The Input Method option switches the key entry functions from
ABC (Alphabetic), T9 Alphabetic (predictive text mode), 123
(Numeric Mode), and Symbols Mode.
ABC (Alphabetic) Input Method (abc, Abc, and ABC)
This input method allows you to enter letters by pressing the key
labeled with the letter you want. Press the key once, twice, three,
or four times until the desired letter displays.
Numeric
The abc method makes all characters of the word lowercase. The
Abc method makes the initial character an uppercase while the
remaining characters are left as lowercase. The ABC method
makes all characters of the word uppercase.
This mode allows you to enter numbers.
Symbols
This mode allows you to enter symbols, such as punctuation
marks.
28
Changing the Text Input Mode
If in Numeric mode: Quick press the
key to toggle
from 123 back to your message in the original text entry
mode.
When you are in a field that holds characters (such as in a text
message), the text input mode indicator displays. Use the
following steps to change the text input mode:
If in Symbols mode: Press the OK soft key to return to your
1. To change the text input mode, press the
key.
message in the original text entry mode.
– or –
If you prefer the T9 Input Method, press the Options soft
key and select Text Mode. Choose your preferred text input
mode.
Note: Press and hold the
key to access Symbols mode. Press the
number key corresponding to the symbol you want to enter. Use the Up
and Down Navigation keys to scroll through the available symbols.
Press the Cancel soft key to exit.
2. After you have selected an input method, keep pressing the
Using the T9 Predictive Text Input Method
T9 Predictive Text input method is based on a built-in dictionary. A
series of keystrokes is interpreted by the phone using this
dictionary to determine the likely word.
key to choose from the following options:
If in Multitap mode: Quick press the
key to toggle
abc (all lowercase), Abc (initial capitalization), ABC (all
uppercase), and 123 (numeric).
Enter a Word in T9 Mode
1. In T9 method, begin entering a word by pressing the 2 to 9
keys. Press each key only once for each letter. The built-in
dictionary lists words that match the entered keystrokes.
If in T9 Predictive Text mode: Quick press the
key to
toggle T9 abc (completed words are all lowercase), T9 Abc
(completed words are initial uppercase),T9 ABC (completed
words are all uppercase), and 123 (numeric).
2. Example: To enter “Hello”, press
,
,
,
,
Entering Text
29
The word that you are typing displays on the screen. The
word changes as you press additional keys.
The word is added to the T9 dictionary and becomes the
first word for the associated keypress series.
3. Enter the whole word before editing or deleting the
Note: This feature may not be available for some languages.
keystrokes.
•
To enter periods, hyphens, colons, or parenthesis, press and hold the
4. When the word displays correctly, go to step 5.
key.
If the word doesn’t display correctly, press the
display alternative word choices.
key to
T9 mode applies grammar rules to ensure that correct punctuation is
used.
•
•
To shift case in T9 mode, short press the
Initial capital, Capital lock, Lower case, and Numeric.
key to toggle between,
Example: Both “Of” and “Me” use the
and
keys. The phone
displays the most commonly used choice first.
You can move the cursor by using the Left and Right Navigation keys.
To delete letters, press the
clear the display.
key. Press and hold the
key to
5. Insert a space by pressing the
key and start entering
the next word.
Using the Alphabetic Input Method
To use the ABC Alphabetic input method use the
keys to enter your text.
Add a New Word into the T9 Dictionary
1. After pressing the keys corresponding to the word you want
to
to add, press the
key to display the alternative words.
1. Press the key labeled with the letter you want:
2. When the last alternative word displays, Spell displays.
•
•
Once for the first letter
Press the Spell soft key.
Twice for the second letter, and so on
2. Select the other letters in the same way.
3. Enter the word you want to add using the ABC mode.
4. Press the Add soft key or the
key.
30
Using the Symbols Input Method
The Symbol input method enables you to insert symbols and
punctuation marks into text.
Note: The cursor moves to the right when you press a different key. When
entering the same letter twice or a different letter on the same key, just
wait for a few seconds for the cursor to move to the right automatically,
and then select the next letter.
1. To enter symbol mode press and hold the
key.
Keys
2. Use the Navigation keys to select an on screen symbol
. , ’ - ? ! @ : / 1
group.
3. To select a symbol from that group, press the corresponding
A B C Ä Å Æ Ç 2 a b
c ä à å æ ç 2
number key.
D E F É ∆ Φ 3 d e f è é Φ 3
G H I Γ 4 g h i ì Γ 4
4. To clear the symbol(s), press the
key. When the input
field is empty, this key returns the display to the previous
mode.
J K L Λ 5 j k l Λ 5
5. To return to your message, press the OK soft key or the
M N O Ñ Ö Ø Ω 6 m n o ñ ö ò ø Ω 6
key.
P Q R S П Σ Ψ 7 p q r s β Σ Ψ 7
T U V Ü θ 8 t u v ü ù 8
Using the 123 Numeric Input Method
The Numeric mode enables you to enter numbers into a text
message. Press the keys corresponding to the digits you want to
enter.
W X Y Z Ξ 9 w x y z Ξ 9
+ = < > € £ $ % & ¥ ¤ 0
Entering Text
31
Section 6: Contacts
This section allows you to manage your contacts by storing their
name and number in Contacts. You can sort Address contact
entries by name, entry, or group.
• Used Space: displays the memory storage allocation (total
available and remaining) within your Phone, SIM card, Additional
Adding a New Contact
Use the following procedure to store a new contact to Contacts.
New contacts are stored on your phone by default.
Note: When storing a contact entry into your SIM card, note that only the
name, phone number, group, and slot location are initially offered as
fields (some SIM cards may allow an address as well). Although you
may add additional fields to a SIM entry; if you move that same SIM card
to another model phone, it is possible that only the basic information will
transfer.
Saving a Number from the Idle screen
1. Press
Contact screen displays.
2. Highlight the First Name
Contacts
Add New Contact. The Add New
Contacts Settings
1. Press
Contacts
Contacts Settings.
,
Last Name, and Display Name fields
and use the keypad to enter names for this contact. For
2. Press any of the following options to activate a function:
• My Business Card: creates and attaches a virtual business card
as an attachment to outgoing messages. For more information,
3. Press the Mobile - Private field and use the keypad to enter
the phone number for this contact.
• Save New Contacts to: defines the destination for new contact
entries (Phone Memory, SIM Memory, or Always Ask).
4. Highlight the Landline field and use the keypad to enter the
• View Contacts from: to filter the display of current Contacts
entries. Options include: All, Phone Memory, or SIM Memory.
landline number for this contact.
5. Highlight the Email - Private field and use the keypad to
enter a private email address for this contact.
• FDN contacts: assigns phone numbers as FDN entries
32
6. Highlight the Group field and press
name and press
7. Highlight the Caller ID field and press
. Select a group
.
Adding More Fields to a Number
.
While in the process of creating a new entry or editing an existing
contact, you can add additional fields to the entry’s list of
information.
8. Select an image to represent this contact and press Options
Select
9. Highlight the Ringtone field and press
10. Select a tone to represent this contact and press Select
1. Press
Contacts
Contacts, highlight a contact
.
name and press
.
.
2. Press Options
Edit
.
.
3. Press Options
Add More Fields.
11. Highlight the Memo field and use the keypad to enter a
4. From the Add Details field, use the Left or Right Navigation
key to highlight the field to add and press Select or
.
The selected field type displays on the Edit Contact screen.
12. Press Options
Save.
5. Enter the information into the new field and press
Options
Save.
Note: By default, Contacts are saved on the phone. To copy them to a SIM
Contacts
33
Deleting Fields From a Number
Adding Pauses to Contact Numbers
1. Press
name and press
2. Press Options
3. Highlight the field to delete and press Options
Field
Contacts
Contacts, highlight a contact
When you call automated systems, you are often required to enter
a password or account number. Instead of manually entering the
numbers each time, you can store the numbers in your Contacts
along with special characters called pauses.
.
Edit.
Delete
To add a pause to a Contact:
.
1. Press
name and press
2. Press Options
3. Highlight the number type where you want to add the pause.
4. After the phone number, press and hold to add a two-
second pause. The letter displays to indicate the pause.
Contacts
Contacts, highlight a contact
.
Note: Only certain new fields may be deleted. If you have not added any new
fields to the contact, the Delete Field button does not display.
Edit.
4. Press Options
Save
.
Saving a Number After a Call Has Ended
P
1. Press
2. Highlight a phone number from the list and press Options
Save to Contacts
3. From the Select Type screen, press New
to bring up the Recent Calls screen.
Note: If more than a two-second pause is required, press
as many times
as needed to add additional two-second pauses.
.
.
5. Press Options
Save to store your changes.
•
Select Update if this was a previously created entry and your are
adding the current number to the previous entry.
Using Contacts
Dialing a Number from Contacts
Once you have stored phone numbers in Contacts, you can dial
them easily and quickly by either using their SIM card location
number or by using the Search field to locate the entry.
34
Finding a Contacts Entry
• Send Message: allows you to send a text message or a
multimedia message to the selected entry.
You can store phone numbers and their corresponding names
onto your SIM card and phone’s onboard memory. The two
locations are physically separate but are used as a single entity,
called Contacts.
• Delete: delete the current contact entry from a target location such
as the Phone and/or SIM card.
• Send Business Card via: allows you to send a business card to
the selected contact via Message or Bluetooth.
Depending on your particular SIM card, the maximum number of
phone numbers the SIM card can store and how they are stored
may differ.
• More allows you to Copy to FDN Contacts or Print via Bluetooth.
:
Find Your Own Phone Number
This function is a memory aid that you can use to check your own
phone number.
1. In Idle mode, press
Contacts Contacts.
2. Use the Up or Down Navigation key to locate a contact.
In Idle mode, press
Own Number
FDN Mode
Contacts Contacts Settings
.
Tip: The Groups tab allows you to locate contacts by group. Use the Left or
Right Navigation key to move between Contacts and Groups.
FDN (Fixed Dialing Number) mode, if supported by your SIM card,
restricts your outgoing calls to a limited set of phone numbers.
When this feature is enabled, you can make calls only to phone
numbers stored in the FDN list on the SIM card.
3. Press the
key or Options Call to call the contact.
Contacts Entry Options
To access the Contacts options, follow these steps:
1. Press
Contacts Contacts, select an entry from
key.
Note: FDN Mode must be set to On in the Menu Settings Phone
Security Set FDN Mode option before you can add, change, or delete
contacts on the FDN List.
the list and press the
2. Press Options and select from the following:
• Edit: allows you to make changes to the contact information.
Changing the FDN mode Status
• Call allows you to call a currently selected entry.
:
1. In Idle mode, press
Settings Phone Security
Contacts 35
Set FDN Mode
2. Select On to enable fixed dialing or Off to disable the option
and press Save
3. Enter the PIN2 code if you selected On
.
6. Highlight the SIM card location field and use the keypad to
enter a location value for the entry on the SIM card.
.
7. Press Options Save to store the new FDN entry.
.
8. Press
to return to Idle mode.
Group Settings
Creating New Group
1. In Idle mode, press
Important!: With Fixed Dial Mode enabled, you are NOT able to dial any
number other than those created as FDN numbers.
Contacts Groups
.
Creating New FDN Numbers
2. Press Options
Create Group
.
With the Fixed Dial mode On, follow these procedures:
3. Enter a name for this group in the New Group field and press
1. In Idle mode, press
FDN Contacts
Contacts Contacts Settings
.
2. Press Options Create FDN Contact
.
4. Press Options
5. Highlight the Picture field and press the
6. Select an image and press Options Select or
Group Settings and press the
key.
3. Enter your PIN2 code and press the
key.
key.
Note: The PIN2 code is provided by your Service Provider.
Select. The selected image displays in the Picture field and
4. Press Name and use the keypad to enter a name for this
the name of the image appears at the right.
FDN contact.
7. Highlight the Ringtone field and press the
key.
5. Press Phone Number and use the keypad to enter a contact
8. Select an audio file and press Options Select
.
phone number for this FDN contact.
9. Press Options
Save.
36
10. Press Back to return to Contacts.
11. Press to return to Idle mode.
Renaming a Caller Group
1. In Idle mode, press
Contacts Groups.
2. Highlight the group that you want to rename.
3. Press Options Rename
4. Backspace over the original name, use the keypad to enter
Adding an Entry to a Group
.
1. In Idle mode, press
Contacts Groups
key.
3. Press Options Add Member, then press the
.
2. Highlight a group entry and press the
a new name for this group, then press Save
.
key.
Adding Speed Dial Entries
4. Highlight a member from the list or highlight All and press
Check. A checkmark beside the name indicates adding this
person to the group.
1. In Idle mode, press
Contacts Speed Dial List
and press the
key.
2. Highlight a position (2-9) on the keypad in which to assign
5. Press Add
.
the speed dial number and press Options Assign
.
Removing an Entry From a Group
Contacts Groups
2. Highlight a group entry and press the key.
3. Highlight the member to delete from this group, press
Options Remove and press the key.
3. Select Address Book or FDN Contacts and press the
1. In Idle mode, press
.
key.
4. Highlight the contact to assign to the speed dial location and
press Select or the key.
The contact is automatically assigned to the speed dial
location.
4. Highlight a member from the list or highlight All and press
Check. A checkmark beside the name indicates removing
this person from the group.
5. Press the Remove soft key.
Contacts
37
2. Highlight a member from the list or highlight All and press
Check
3. Press Copy
Using the Service Dialing Numbers
You can view the list of Service Dialing Numbers (SDN) assigned
by your service provider. These numbers may include emergency
numbers, customer service numbers, and directory inquiries.
.
.
1. In Idle mode, press
Contacts Service Numbers
Important!: When copying from the Phone to the SIM card some information
may be lost.
and press the
key.
2. Scroll through the numbers using the Up or Down
4. At the Continue? prompt, press Yes to copy the contact, or
Navigation key.
No to cancel.
3. Press
to dial the selected number.
5. Press
to return to Idle mode.
Managing Contacts Entries
Copying an Entry to the Phone
You can copy, delete, and view the memory status for the Phone
and SIM entries on your phone.
1. In Idle mode, press
Contacts SIM Management
key. The
Copy Contacts from SIM and press the
Copying an Entry to the SIM Card
phone displays a list of your current contacts stored on the
SIM card.
Note: When storing a contact entry into the SIM card, note that only the name,
phone number, group, and slot location are initially offered as fields
(some SIM cards may allow an address as well). To save additional
information for a particular contact, such as other phone numbers, or e-
mail, it is important to add new fields to that Contact information. It is
also important to note that if you move the SIM card to another phone
that does not support additional fields on the SIM card, this additional
information may not be available.
Note: If the entry’s associated Group image has a SIM location icon on it, then
the entry exists on the SIM card.
If the entry’s associated Group image does not have a SIM location
icon, then this entry currently exists on the phone.
2. Highlight a member from the list and press Check
.
1. In Idle mode, press
Contacts SIM Management
key.
Copy Contacts to SIM and press the
38
3. Repeat Step 3 for each entry you want to copy to the Phone
2. Highlight an entry from the list or highlight All and press
Check
3. Press Delete
or highlight All and press the
key to place a
.
checkmark alongside all entries.
.
4. Press Copy
.
4. At the Do you want to continue? prompt, press Yes to delete
5. Press
to return to Idle mode.
or No to cancel.
5. Press
to return to Idle mode.
Deleting a Contacts Entry
You can delete a Phone or SIM entry from your phone’s memory.
Note: Entries in the FDN list must be deleted from within the FDN list
Deleting an entry from the Phone
1. In Idle mode, press
press the key.
2. Highlight a contact to delete and press the
3. Press Options Delete
Contacts
Contacts and
Checking Used Space
You can check how many names and numbers are stored in
Contacts, in both SIM card and the phone memory. You can also
see the capacity of both memories.
key.
.
In Idle mode, press
Used Space
Contacts Contacts Settings
4. At the Delete Contact? prompt, press Yes to delete or No to
.
cancel.
• Phone: tells you how many Contacts entries (out of a possible
1000) are in use.
5. Press
to return to Idle mode.
• SIM Card: tell you how many SIM Card entries are in use.
Deleting all entries from the SIM
• Additional No. 1: if you have added additional numbers to
contacts saved on the SIM card, this is a counter of the number of
SIM contacts with a second number saved on your SIM card.
1. In Idle mode, press
Contacts SIM Management
key.
Delete Contacts from SIM and press the
Contacts
39
• Additional No. 2: if you have added additional numbers to
contacts saved on the SIM card, this is a counter of the number of
SIM contacts with a third number saved on your SIM card.
• Email: tells you how many entries are in use.
• FDN Contacts: tells you how many entries are in use on your
FDN SIM memory.
Note: Depending on the SIM card, the number of entries may differ.
6. Press
to return to Idle mode.
40
Section 7: My Account
My Account allows you to manage your account from your phone’s
browser. You can use it to view your airtime, data, messaging, and
roaming usage. You may also be able to see account balances,
pay your bill, change services, and reset your voicemail password.
To access My Account:
When the Idle screen displays, press
My Account. The
browser opens and displays the My Account page.
My Account
41
Section 8: Music Player
The Music Player is an application that can play music files. The
music player supports files with extensions AAC, AAC+, eAAC+,
MP3, WMA, 3GP, MPEG, MP4, and M4A. Launching Music Player
allows you to navigate within your Music folders and select
playback material.
Using the Music Player
1. In Idle mode, press
Select soft key or the
Music Player and press the
key.
2. Highlight a folder from the folders available and press the
key to open the folder.
Note: Add music from music store partners through the applicable music client.The
Music Player does not necessarily support all features of a particular file
format nor all the variations of those formats. Copyright protections may
prevent some images, music (including ringtones) and other content
from being copied, modified, transferred or forwarded.
3. Highlight a song and press the
key to play the song.
Note: The maximum number of songs you can synchronize between your
phone and your PC is 1000.
Adding Music to your Handset
Music files (such as ringtones) can be added to your handset by
using one or more of the following methods:
Music Player Options
The Music Player options menu configures your phone’s music
playing options such as shuffling the music files, looping music
files, adding songs to the playlist, and more.
•
•
Download music and ringtones directly from your service provider.
Add music from your existing digital media collection through Windows
®
1. In Idle mode, press
Music Player and press the
Media Player .
Select soft key or the
key.
2. Navigate to a music file and press the
key. The music
Note: If the Bluetooth feature is currently active on your handset, USB
communication is not available. To transfer files to your handset, turn off
the Bluetooth functionality (Settings Connectivity
Bluetooth).
file will begin to play.
3. Press the Options soft key and select one of the
following options:
42
• Pause/Resume: pauses or resumes playing the song when
pressed.
Playing Music Transferred to the Handset
1. In Idle mode, press
Music Player All Music
• Transfer to Bluetooth Headset: transfers the selected music file to
a Bluetooth headset.
and press the Select soft key or the
key.
• Hide Player: continues to play the music but hides the player in
the background.
Note: All Music displays all of the downloaded songs or all of the songs
stored on the phone or microSD card.
• Shuffle: allows you to turn shuffle On or Off. When turned on, the
current list of songs are randomly shuffled for playback.
2. Use the Up or Down Navigation key to select the song you
• Loop repeats the currently active song or replays each
song in the current list and as the last song in the list
ends, the player replays all of the songs in the listed order.
:
want to listen to and press the
key.
Playing Music through a Stereo Bluetooth Device
• Add to Playlist: adds the currently active song to either a new or
current playlist.
Your device supports the Stereo Bluetooth profile (A2DP) that
when synchronized to a stereo Bluetooth headset plays music in
stereo.
• Send via: sends the selected music file in a message or to a
Bluetooth enabled device.
1. Pair your handset to a stereo Bluetooth device. For specific
• Set as: allows you to set the music file as an Alarm Tone.
• Equalizer: allows you to select from one of the preset equalizer
settings. Select from Normal, Rock, Pop, Dance, Classic, or Jazz.
2. In Idle mode, press
Music Player All Music
and press the Select soft key or the
key.
• Properties: displays properties related to the selected song such
as: Artist, Title, Size, Format, Track length, Genre, Description,
and Track Number.
3. Select a song and press the
key to play the song.
Playing Music while Using the Phone
4. Press the Select soft key and follow the prompts to set the
selected option.
The Music Player allows you to play music in the background while
performing other tasks on your phone. The music pauses when an
incoming call is accepted, and the music resumes when the call
Music Player
43
ends. Music continues to play when you receive a Text Message,
Multimedia Message, or an Instant Message.
6. Press Rewind
previous song. To temporarily stop the music, press Pause
key). Press Fast Forward (Right Navigation
(Left Navigation key) to navigate to the
The other functions you can use are:
(
•
•
Call: make or receive a call (music player is paused)
key) to advance to the next song. While playing the music in
Idle mode, you can exit the Music player by pressing the
key.
Messages: send or receive a text or multimedia message. Music
continues to play unless an audio/video clip is received as a part of a
multimedia message.
After the Music Player is enabled, you can listen to music in the
background while performing other phone functions.
•
•
Internet: browse the web (music continues to play).
Games: lets you play games while listening to music.
Note: Playing music and pausing the music player uses the same amount of
battery.
1. In Idle mode, press
Music Player and press the
Select soft key or the
key.
2. Select a folder and press the Select soft key or the
key.
3. Highlight a song to play and press the
key.
4. Once the music starts to play the music icon (
) displays
on the top of the screen.
5. To hide the Music Player, press the Options soft key and
select the Hide Player option or press the key once.
44
Adding Songs to a Playlist
1. In Idle mode, press
Select soft key or the
Important!: When finished using the Music Player function, press the
key twice to stop the function and prevent the battery from losing
its charge. Pausing the player continues to use the battery.
Music Player and press the
key.
Using Playlists
2. Highlight Playlists and press
or the Select soft key.
Playlists are used to group songs in lists for playback. Playlists can
be created using the handset’s Music Player options menu or
made using a third party music application (such as Windows
Media Player) and then downloaded to the phone.
3. Highlight a playlist.
4. Press the Options soft key, select Add Tracks and press the
key.
5. Highlight All, an individual song, or multiple songs and press
Creating a Playlist
the
key to place a check mark beside your selections.
1. In Idle mode, press
New Playlist and press the Select soft key or the
2. Select All and press or the Left Navigation key.
Music Player Playlists
key.
6. Press the Add soft key and wait for the song to add to the
current playlist.
Removing songs from a Playlist
3. Select a song or All from the list and press the Check soft
key to place a check mark next to the song.
1. In Idle mode, press
Music Player and press the
Select soft key or the
key.
4. Press the Add soft key, enter a playlist name in the Name
field and press the Save soft key.
2. Highlight Playlists and press
or the Select soft key.
5. To continue building to the Playlist, highlight the playlist you
just created, press Options Add Tracks and add more
music from your phone or memory card.
3. Highlight a playlist and press
. The tracks added
display.
6. Press the
key to return to Idle mode.
Music Player
45
4. Highlight the track to delete, press the Options soft key,
scroll to Remove and press the Select soft key or the
key.
3. Once the USB connection is established, the handset
displays “Connected” and the computer screen displays the
A847R device.
5. At the Remove <title of song>? prompt press the Yes soft key
to remove the song from the playlist, or press the No soft
key to cancel.
4. From within the Windows Media Player application, click on
the Library tab.
5. On the left side of the screen, under Playlists, click Create
6. Press the
key to return to Idle mode.
playlist and name the playlist a847R-Phone.
6. Under Library, select Music. The downloaded songs list
Importing a Playlist from Windows Media Player
displays.
7. Highlight a song from the list, right click and select
Add to a847R-Phone
.
1. Open Windows Media Player on your computer (version
Note: If there are no items present in the playlist, click the Edit Playlist button
and begin adding the music files from among the various media
categories.
10.0 or higher).
2. Use the USB adapter cable to connect the handset to the
8. From the Windows Media Player application, ensure that
the SGH-a847R device displays in the upper-right corner of
the screen. If not, click on Next device until SGH-a847R
displays.
target PC. If the Select USB Mode window appears, select
Media Player. A USB to PC icon (
) displays on the
screen when an active connection is established.
46
9. From the Windows Media Player application, in the
upper-left corner of the screen, under Playlists, drag and
drop the SGH-a847R playlist to the Sync list on the
lower-right portion of the screen and press the Start Sync
button. The playlist synchronizes to the SGH-a847R
handset.
1. Download a song to your PC.
2. Insert the microSD card into the handset. For more
3. Use the USB adapter cable to connect the handset to the
target PC. If the Select USB Mode window appears, select
Media Player. A USB to PC icon (
) displays on the
10. It is now safe to unplug the USB connector from the
screen when an active connection is established.
handset.
4. Once the USB connection is established, the handset
displays “Connected” and the computer screen displays
your device.
11. In Idle mode, press
Music Player and press the
Select soft key or the
key.
12. Highlight Playlists and press
or the Left Navigation
5. From the computer, highlight the song you wish to download
key. The SGH-a847R playlist displays.
to the handset.
13. Press the
key to return to Idle mode.
6. Using your right mouse button, click on the highlighted song
and select Transfer Track(s) to Portable Device from the
drop-down menu. This step begins the download process.
Transferring Music Directly to your Phone
Important!: In order to download music from the computer to your handset, a
microSD card and USB data cable are required. For this
page 104.) and enable Media Player or Ask on Connection as the
Note: The Music Player does not necessarily support all features of a
particular file format nor all the variations of those formats. Copyright
protections may prevent some images, music (including ringtones) and
other content from being copied, modified, transferred or forwarded.
Music Player
47
Transferring Music using a Media Application
Note: If there are no items present in the playlist, click the Edit Playlist button
and begin adding the music files from among the various media
categories.
A USB cable, microSD card, and a current version of a media
application (such as Windows Media Player) are required for this
procedure.
5. From the Windows Media Player application, ensure that
the SGH-a847R device displays in the upper-right corner of
the screen. If not, click on Next device until SGH-a847R
displays.
6. From the Windows Media Player application, in the
upper-left corner of the screen, under Library, drag and drop
the song to the Sync list on the lower-right portion of the
screen and press the Start Sync button. The song
synchronizes to the a847R handset.
1. Open Windows Media Player on your computer (version
10.0 or higher).
2. Use the USB adapter cable to connect the handset to the
target PC. If the Select USB Mode window appears, select
Media Player. A USB to PC icon (
) displays on the
7. It is now safe to unplug the USB connector from the
screen when an active connection establishes.
handset.
3. Once the USB connection establishes, the handset displays
8. In Idle mode, press
Music Player and press the
“Connected” and the computer screen displays the a847R
Select soft key or the
key.
device.
4. From within the Windows Media Player application, click on
the Library tab and select Songs. The downloaded songs
list displays.
48
Section 9: Internet
Your phone includes a WAP (Wireless Application Protocol)
browser that allows wireless access and navigation of the Web
using your phone.
Exiting the browser
To exit the browser at any time, press the
key.
Navigating the Browser
1. To select an item, highlight an entry and press
Accessing the Browser
To access the Web browser:
.
2. To return to the previous page, press Back or press
.
When the Idle screen displays, press the Internet soft key (or
Internet). The default homepage displays.
3. Press the Options soft key to access the following options:
•
•
Open: opens a highlighted Web page.
Navigate:
–
–
–
Backward: opens the previous page.
Reload: reloads the current page.
Homepage: reopens the default homepage.
•
•
Standard view/Smart-width view: lets you change the
page magnification.
View Bookmarks: displays a list of your bookmarked
sites. You can browse to any of these sites by selecting
them in your Bookmarks list.
•
•
Add to bookmarks: adds the current URL to Bookmarks.
Enter URL: lets you manually enter the URL address of a
web site and access the site.
•
Advanced:
Internet
49
–
–
History: Lists all recently viewed URLs.
Using Bookmarks
Send URL via: sends the currently viewed URL to a recipient in a
message or via Bluetooth.
While navigating a website, you can bookmark a site to quickly
and easily access it at a future time. The URLs (website
addresses) of the bookmarked sites are stored in the Bookmarks
folder, where you can use the nine preset bookmarks and store
your own favourite URLs.
–
–
–
Save: lets you save an Image or Web Page.
Saved pages: provides a list of saved web pages.
Page details: allows you to view details about the current page: Title,
URL, MIME type, Last updated and Size.
Accessing a Website Using Bookmarks
1. When the Idle screen displays, press the Internet soft key
•
Browser Settings:
,
–
Clear Caches: You can clear the information stored in the cache,
which is the phone’s temporary memory and stores the most recently
accessed Web pages.
then press Options View Bookmarks.
2. Press a bookmark item in the Bookmarks list.
Adding Bookmarks
1. When the Idle screen displays, press the Internet soft key
2. Press the Options soft key and select Enter URL.
3. Enter the URL you want to bookmark using the keypad.
– Cookies: Use this option to delete cookies or set cookie options.
Cookies identify who you are when you revisit web sites; however,
they are also used to track your web surfing habits. Empty Cookies
increases security. Cookie Options allow you to Accept all cookies,
Reject all cookies, or Prompt you when a site wants to deposit a
cookie.
.
–
Preferences: The Preferences option allows you to set browser
preferences such as Run JavaScript, Display Images, Play Sound,
and Run Flash.
4. Highlight Add Bookmark and press the Check soft key to
place a checkmark in the box.
–
–
Browser Profiles: Lets you choose a browser profile from the options
provided by your service provider.
5. Highlight Title and enter a title for the bookmark.
About Browser: Displays information about the browser such as the
type and version.
6. Press the Go soft key. The website opens and is added to
the bookmark list.
50
Editing Bookmarks
1. From the Bookmarks list, highlight the bookmark you want
to change and press Options Edit.
2. Edit the Title and URL as required.
3. Press the Save soft key.
Deleting a Bookmark
1. From the Bookmarks list, highlight the bookmark you want
to change and press Options Delete Selected.
2. At the Delete? confirmation pop-up, press Yes to continue,
or No to cancel.
Internet
51
Section 10: Messages
This section describes how to send or receive different types of
messages. It also includes the features and functionality
associated with messages.
3. Press the Options soft key when you are finished writing
the message. Choose from the following options:
• Text Mode: allows you to select the text input mode. Select
between T9 Predictive Text, Multitap, Numeric, or Symbols.
Your phone provides the following message types:
•
•
•
Text Messages
• View Recipients List: allows you to view and modify your
Recipient LIst.
Multimedia Messages
IM Messages
• Advanced Options: allows you to Add Subject, Attach Files,
Attach Business Card, Attach Appointment, and Attach
Favourites URL. Also allows you to change the language of your
message to English or Français.
Text Messages
The Short Message Service (SMS) allows you to send and receive
short text messages to and from other mobile phones. To use this
feature, you must subscribe to your service provider’s message
service.
• Save in Drafts: allows you to save the message to your Drafts
folder.
• Save as Templates: allows you to save the message as a
template to use with other messages.
The Message icon (
) displays when you receive new text
• Sending Options: allows you to request a delivery report and
keep a copy of your message.
messages. When the memory is full, an error message displays
and you cannot receive any new messages. Use the Delete option
in your Inbox to delete obsolete messages.
• Cancel Message: allows you to cancel a message. Press the Yes
or No soft key at the Save to Drafts? prompt.
Creating and Sending Text Messages
4. To insert an attachment, press the
key for the
1. In Idle mode, press
Messages Create
following attachment options:
Message. The Create Message screen displays.
• Picture: allows you to attach a photo to your message.
2. In the text field, begin creating your text message.
• Video: allows you to attach a video clip to your message.
52
• Sound: allows you to attach an audio clip to your message.
selected number to your message’s recipients list field. This entry
can later be appended prior to sending the message.
• Templates: allows you to attach a template to your message.
•
•
Contacts: allows you to insert additional recipients from Contacts
by using your Up and Down Navigation keys to select those
entries you wish to add.
• Emoticon: allows you to add an emoticon (created by phone
characters) to your message. An example would be:-) to signify a
happy face.
–
–
Press the
key to place a check mark next to those entries.
• Take Picture: allows you to take a photograph to attach to your
message.
Press the Add soft key to return to the message once you select the
desired entries.
• Record Video: allows you to record a Video clip to attach to your
message.
Group: allows you to insert additional Group members from
Contacts by using your Up and Down Navigation keys to select
those entries you wish to add.
• Record Sound: allows you to record an audio clip to attach to your
message.
7. You can copy others on the message by pressing the
• Favourites URL: allows you to add a web address from your list of
bookmarked Internet sites to the message.
Options soft key and choosing the Change Recipients
option. Select Cc or Bcc
.
• Contact Info: allows you to add contact info from Contacts to the
message.
8. You can save your message to your Drafts folder by
pressing the Options soft key and choosing the Save to
Drafts.
Important!: Adding a photo, audio clip, or video clip to a text message changes
the message from a text message to a multimedia message.
5. Press the Send to soft key. The Recipient List displays.
6. Enter either a phone number or select a contact name (from
Contacts) by pressing the Options soft key and choosing
the Add Recipients option.
•
Recent Contacts: allows you to choose from a brief list of
recently dialed phone numbers. Press the key to add a
Messages
53
9. You can add additional recipients from Contacts by
Use the Delete option in each message box to delete obsolete
messages.
selecting one of the Empty fields and entering another
Creating and Sending Multimedia Messages
number.
– or –
1. In Idle mode, press
Messages Create
Message and press the Select soft key or the
key.
Select another Empty field and press Options Add
Recipients and choose between Recent Contacts
,
Contacts
,
2. In the text field, begin creating your text message.
or Group and press the key.
3. Press the Insert
key, and select one of the following
items:
•
Add the additional recipients from Contacts by selecting those
entries you wish to add.
• Picture: allows you to attach a photo to your message.
•
•
Press the
key to place a check mark next to the entries.
• Video: allows you to attach a video clip to your message.
Press the Add soft key to return to the previous list of Recipients
once you select the desired entries.
• Sound: allows you to attach an audio clip to your message.
• Templates: allows you to add one of the preset message
templates to the text.
•
Press Options
Back to return to the message.
10. Press the Send soft key to send the message.
• Emoticon: allows you to add an emoticon (created by phone
characters) to your message. An example would be :-) to signify a
happy face.
Multimedia Messages
Multimedia Messaging Service (MMS) allows you to send and
receive multimedia messages to and from other mobile phones. To
use this feature, you may need to subscribe to your service
provider’s multimedia message service.
• Take Picture: allows you to take a photograph to attach to your
message.
• Record Video: allows you to record a Video clip to attach to your
message.
The Multimedia Message icon (
) displays when you receive
• Record Sound: allows you to record an audio clip to attach to your
new multimedia messages. When the memory is full, an error
message displays and you cannot receive any new messages.
message.
54
• Favourites URL: allows you to temporarily exit the message,
access your Favorites list then select those URLs you would like
to add to the current message.
•
Group: allows you to insert additional Group members from
Contacts by using your Up and Down Navigation keys to select
those entries you wish to add.
• Contact Info: allows you to choose an existing Contacts entry,
7. You can copy others on the message by pressing the
then add it to your message.
Options soft key and choosing the Change Recipients
4. Select an image, sound, or video and press the
key.
option. Select Cc or Bcc
.
8. You can save your message to your Drafts folder by
pressing the Options soft key and choosing the Save to
Drafts.
Note: A multimedia message should only be sent to a phone that can support
the receipt and display of this message type.
5. Press the Send to soft key. The Recipient List screen
9. You can add additional recipients from Contacts by
displays.
selecting one of the Empty fields and entering another
6. Enter either a phone number or contact name (from
Contacts) by pressing the Options soft key and choosing
the Add Recipients option.
number.
– or –
Select another Empty field and press Options Add
•
Recent Contacts: allows you to choose from a brief list of
recently dialed phone numbers. Press the key to add a
Recipients and choose between Recent Contacts
,
Contacts,
selected number to your message’s recipients list field. This entry
can later be appended prior to sending the message.
or Group and press the key.
•
Add the additional recipients from Contacts by selecting those
entries you wish to add.
•
Contacts: allows you to insert additional recipients from Contacts
by using your Up and Down Navigation keys to select those
entries you wish to add.
•
•
Press the
key to place a check mark next to the entries.
–
–
Press the
key to place a check mark next to those entries.
Press the Add soft key to return to the previous list of Recipients
once you select the desired entries.
Press the Add soft key to return to the message once you select the
desired entry.
Messages
55
•
Press Options
Back to return to the message.
Screen. Use the navigation keys to select the type of
10. Press the Send soft key to send the message.
message you would like to review.
Attach a Business Card to a Message
The following icons indicate the message type.
To attach your Business Card to an outgoing message, follow
these steps:
•
•
•
indicates a new Voicemail message.
1. Create a contact entry containing your own information (the
information stored in the entry is used as a business card).
indicates a new Text message was received.
indicates a new Multimedia message was received.
2. Press
3. Highlight the contact (the business card) in which you are
sending and press the key.
4. Press Options Send Business Card via and press the
Contacts
Contacts.
2. Press the View soft key (for retrieving text or multimedia
messages), Dial soft key (for retrieving voicemail
messages), or the
key. The Messaging, Call History,
or Voice Mail screens display with the details of the
incoming communication. If you exit from this View screen,
navigate to the Messaging or Call History screen, or dial
your Voicemail contact to access the communications.
Right Navigation key.
5. Select Message and press the
6. Enter your message.
key.
Inbox
7. Add recipient(s) and press Send
.
The Inbox stores received text and multimedia messages. You can
tell what kind of message was received by the icon displayed. If
the icon envelope is open then the message was read, otherwise a
closed envelope displays.
Locating a Message
1. In Idle mode, new text messages, multimedia messages,
and voice messages display in a View tab on the Main
56
Retrieving a Text Message from the Inbox
3. To view information about the message, such as the
sender’s number, time and date, the message size, and the
subject, press the Options soft key, highlight Message
When a new Text message comes in, the display (in Idle mode)
shows a new Message notification icon (
available sender’s information.
) along with the
Details, and press the Select soft key or the
key.
1. In Idle mode, press
Messages Inbox and press
Press the Back soft key to return to the Inbox.
the Select soft key or the
key.
4. To view the attachment and the message, press the
2. Select the message to retrieve and press the
key to
key.
view the message.
•
•
To pause the audio/video clip, press the
key.
To stop the audio/video clip press the Stop soft key.
Tip: When viewing a text message, press the Up or Down volume keys to
increase or decrease the font size of the message text. Six different font
sizes are available.
5. To scroll through the message (if additional text pages were
added), press the Up or Down Navigation key.
3. Press the
key to return to Idle mode.
6. Press the
key to return to Idle mode.
Retrieving a Multimedia Message from the Inbox
When a new Multimedia message comes in, the display (in Idle
Mode) shows the Multimedia Message icon (
notification along with the sender’s number.
) and a text
1. In Idle mode, press
Messages Inbox and press
the Select soft key or the
key.
2. Select a multimedia message from the list.
Messages
57
Using Message Options
Note: When storing a Contacts entry into the SIM card, only the Name,
Number, Group, and Slot location display initially. To save additional
information for a particular contact, such as other phone numbers, or e-
mail, it is important to add new fields to that Contact information. If you
move the SIM card to another phone that does not support additional
fields on the SIM card, the additional information is not available.
Message options at the Inbox level differ according to what action
was taken with the message. While viewing the list of messages in
the Inbox, press the Options soft key to access the following
message options:
Options for SMS Messages
Options for Multimedia Messages
•
•
•
Reply: allows you to reply to the message via Text message.
Voice Call: allows you to dial the originating message number.
Delete: allows you to delete the Selected message or Multiple
messages.
•
•
•
Reply: allows you to reply to the message.
Voice Call: allows you to dial the originating message number.
Delete: allows you to delete the Selected message or Multiple
messages.
•
•
Forward: allows you to forward the message.
•
•
Forward: allows you to forward the message to another person.
Message Details: allows you to view brief information about the
message, such as the sender’s number, time and date, the
message size, and the subject.
Save to Contacts: allows you to save the recipient or sender’s
information from the message to Contacts on either the Phone or SIM.
More: provides the following two options:
•
–
Move to Phone/Move to SIM Card: If a message is stored in the SIM
card, it is saved to the phone’s memory. If a message is stored in the
phone’s memory, it is then saved to the SIM card.
•
More:
–
–
–
Lock/Unlock allows you to lock or unlock a message.
Mark as Read allows you to mark the message as read.
Sort by allows you to sort messages by Sender, Read/Unread, Type,
Subject, Size, and Lock/Unlock.
–
–
–
Lock/Unlock allows you to lock or unlock a message.
Mark as Read: allows you to mark the message as Read.
Sort by: allows you to sort the messages in your Inbox by sender, read/
unread, type, subject, size, and locked status.
Sent
This message box contains messages that were sent.
Note: While viewing a text message, additional options such as Saving a
When you enter this menu, the list of messages sent displays with
the recipients’ phone numbers or names, if available in Contacts.
Template and Printing via Bluetooth device are available.
58
In Idle mode, press Menu Messages Sent and press the
Select soft key or the key.
Outbox
procedure, you must complete the previous procedures for
selecting your default IM Community.
1. In Idle mode, press
Messages IM and press
the Select soft key or the
key.
This message box contains messages that will be sent.
2. Choose a Community and press the Select soft key or the
When you enter this menu, the list of messages in the Outbox
displays with the recipients’ phone numbers or names, if available
in Contacts.
key.
3. Highlight New Account (if this is the first time you are signing
into the IM account) and press the OK soft key or the
key.
In Idle mode, press Menu Messages Outbox and press
the Select soft key or the
key.
Drafts
4. Select each information field and enter the appropriate
This message box stores unsent messages that you want to edit
or send later.
information.
5. Scroll to the Save Password option and press the
key
In Idle mode, press
Messages Drafts and press
to place a check mark next to that option to automatically
enter your ID & Password information.
the Select soft key or the
key.
Using Instant Messaging (IM)
6. Scroll to the Automatic Sign-In (Auto Sign In) option and
Instant Messaging allows you to send and receive instant
messages using Windows Live and Yahoo communities.
press the
key to place a check mark next to that
option. Checking this option allows you to automatically sign
in without going through the entire procedure.
Signing into Your IM Account
Although each account type differs, the initial sign in procedure is
common to all supported types. Before beginning the sign in
7. Press the Sign In soft key or the
key.
Messages
59
settings and press the Select soft key or the
key.
Voicemail
This option allows you to access your voicemail.
2. Select the type of messages that you want to change
settings.
Note: These steps may be different depending on your network.
•
•
•
•
•
Text Message
Accessing Your Voicemail
Multimedia Message
Voicemail
1. In Idle mode, press
press the Select soft key or the
– or –
Messages Voicemail and
Push Message
key.
Broadcast Message (SIM dependent)
3. Press the Select soft key or the
key.
Press and hold the
key.
Text Message
Your phone will automatically call the voicemail number.
The following options are available:
2. When connected, follow the voice prompts from the voice
•
Sending Options: allows you to set the following options:
mail center.
–
–
–
Character support: selects whether messages support GSM alphabet,
Unicode, or Automatic selection.
Request Delivery Receipt: lets you request s delivery receipt for sent
messages.
Accessing Your Voicemail From Another Phone
1. Dial your wireless phone number.
Keep a Copy: allows you to keep a copy of your sent messages.
2. When you hear your voicemail greeting, press
3. Enter your password using the keypad.
Messages Settings
.
•
Text Message Centre: allows you to change the settings for the Text
Message Centre. Press Options and select Edit to access settings:
Centre Address, Validity Period, Default Type, Name, and Email
Gateway Address.
You can set up various options for using messaging services.
1. In Idle mode, press Messages Messages
60
–
–
–
Home Network: allows you to set the message receipt option for your
home network. Choose from Auto Download, Manual, or Reject.
Roaming Network: allows you to set the message receipt option when
roaming. Choose from Auto Download, Manual, Restricted, or Reject.
Send Read Report: when this option is enabled, your phone sends a
notification back to the recipient indicating that your message was read.
Select between Allowed, Never, or Always ask.
Note: You should not change these settings unless advised to do so by your
service provider. Incorrect settings may prevent messaging from
working properly.
Multimedia Message
The following options are available:
•
Sending Options:
–
–
–
Send Delivery Report: when this option is enabled, the phone allow the
network report to the sender whether or not the message was received.
Reject Anonymous: allows you to automatically reject messages with a
category of anonymous.
Reject Advertisement: allows you to automatically reject messages with
a category of advertisement.
–
–
Priority: you can select the priority level of your messages.
Expiration: select the length of time you wish the message you sent to
remain on the MMS server.
Delivery Time: you can set a time delay before the phone sends your
messages.
Message Size: you can set the maximum allowed size for a multimedia
message.
Request Delivery Report: when this option is enabled, the network
informs you whether or not your message was delivered.
Request Read Report: when this option is enabled, your phone sends a
request for a reply along with your message to the recipient.
Keep a Copy: you specify whether you want to keep a copy of the sent
messages on your phone.
–
–
–
–
–
–
•
•
Multimedia Message Profiles: you can select a connection profile used
for sending and receiving Multimedia messages. The sending options
are:
–
–
–
–
GoRogers
Rogers Media
Rogers Internet
Rogers Streaming
Auto Resize Image: you can specify that an attached image be resized
as follows:
Add My Name Card: you send your contact information along with your
sent messages.
–
–
–
No Resize
100 KB
300 KB
•
Receiving Options: you can specify the category of messages you want
to receive. Allows you to set the following:
Messages
61
–
600 KB
•
•
Receiving Option: you can turn push message reception On or Off.
Service Loading: you can set the service loading setting to Always,
Prompt or Never.
•
•
Creation Mode: you can specify that the users creating new media
content be given the following options:
–
–
–
Free
Warning
Restricted
Broadcast Message (SIM card dependent)
This network service allows you to receive text messages on
various topics, such as the weather or traffic.
Default Style: you can specify the default visual parameters used by this
type of message:
Please contact your service provider for details.
–
–
–
–
Font Colour
Font Style
Background Colour
Page Duration
Templates
You can save Text and Multimedia message templates on your
phone that you can retrieve and apply when creating a message.
You can change the applied template as needed before sending a
message.
Voicemail
The following option is available:
Create a Template
1. When the Idle screen displays, press
•
Voicemail: you can specify the default phone number used for access of
Messages
phone’s remote voicemail.
Templates and press the Select soft key or the
key.
Important!: Changing the Voicemail number can affect your ability to access
your voicemail. Check with your provider’s Customer Service
before changing.
2. Select a template type (Text Templates or Multimedia
Templates).
Push Message
3. Press the Create soft key.
Push Messages are service provider-sent messages, that include
software upgrades or general information messages. The
following options are available:
4. Enter the text you want to save in the template. Press Insert
to select and attach a multimedia file.
62
5. Press Options Save as Templates to save the template
1. In Idle mode, press
Folder and press the Select soft key or the
2. Select the folder you want to delete the messages in by
pressing the key to make a check mark.
Messages Delete by
file.
key.
Use a Template
1. When the Idle screen displays, press
Messages
Templates and press the Select soft key or the
You can delete messages in all of your folders by selecting
key.
the All box.
2. Select a template type (Text Templates or Multimedia
3. Press the Delete soft key.
Templates).
4. At the Delete? prompt, highlight Locked Messages and press
3. Highlight a current template message and press the
the
key to make a checkmark if you also want to
Options soft key to access the following options:
delete the locked messages.
• Send: allows you to create and send a message using the
selected template.
5. Press the Yes soft key to delete or the Cancel soft key to
cancel.
• Create: allows you to add a new template to the list.
6. Press the
key to return to Idle mode.
• Edit: opens a new message window using the selected template.
• Delete: deletes the currently Selected template or Multiple
templates.
Used Space
The Used Space option displays the memory used for various
types of messages as well as the available or remaining memory.
4. When you have finished, press the
key to return to
Idle mode.
Delete by Folder
This option allows you to delete the contents of one or more
message folders.
Messages
63
1. When the Idle screen displays, press the Menu
3. Press the
key to return to Idle mode.
Messaging Used Space, and press the Select soft key
or the
key.
2. Use the Left or Right Navigation key to select the message
type to view:
• Multimedia Message - displays total available space and memory
used for:
–
–
–
–
Inbox
Sent
Outbox
Drafts
• Text Message - displays memory used on both Phone and SIM
Card for:
–
–
–
–
Inbox
Sent
Outbox
Drafts
• Push Message - displays memory used on Phone for:
Inbox
• Broadcast Messages - displays memory used on Phone for:
Inbox
• Configuration Message - displays memory used on Phone for:
Inbox
–
–
–
64
Section 11: Media
The Media menu is used to manage your media files (audio,
pictures, videos and other files).
3. Select a music or tone file and press the Options soft key for
these options:
Media files are organized in a series of folders. You can also
create additional folders or sub-folders to further organize your
files.
• Play: plays the selected tone or music file.
• Set as: sets the selected tone or music file as a Call Ringtone,
Caller Ringtone, or Alarm Tone.
Audio
• Create Folder: creates a folder to contain the selected file.
The Audio menu offers Ringtones, Music, and Recorded Audio.
Here you can access all the tones or music stored on the phone,
play a selected tone or music file, shop for tones or music,
manage answer tones, or view and play the recorded audio tones.
• More
:
–
–
Sort by: sorts the selected file by Name, Date, Size, or Type.
Properties: displays the file properties such as Artist, Title, Album
Track length, Genre, Description, Track number, and Format.
1. In Idle mode, press
Media Audio and press the
Pictures
Select soft key or the
key.
Accessing the Pictures Folder
2. Select one of the following Folders and press the Select
soft key or the key.
1. In Idle mode, press
Media Pictures, and press
key.
key to view the photo.
key to exit the menu.
the Select soft key or the
• Ringtones: lists all of the available tones on the phone, or you can
shop for ringtones.
2. Select a photo and press the
3. Press the Back soft key or the
• Music: storage location for your music files.
• Recorded Audio: displays a list of audio files recorded using the
phone.
Media
65
Pictures Folder Options
Video
If you enter the Pictures folder using the menus, and press the
Options soft key before selecting an existing graphic, the
following options are available:
The Video menu option allows you to view videos you have taken
and downloaded, and shop for video files.
1. In Idle mode, press
Media Video and press the
•
•
•
Download: allows you to download a graphic.
Select soft key or the
key.
Take Photo: allows you to take a photo with your camera.
Create Folder: allows you to create subfolders under the Pictures folder
in which to store pictures that you take.
2. Select a video and press the
3. Press the Back soft key or the
Videos Folder Options
key to view the video.
key to exit the menu.
If you highlight a graphic but do not press the
following options are available:
key, the
If you enter the Videos folder using the menus, and press the
Options soft key before selecting an existing video, the following
options are available:
•
•
View: allows you to view the graphic.
Set as: allows you to set the currently selected graphic to display as Main
Display, Front Display or assign to a Caller ID.
•
•
•
Download: allows you to download a video.
•
•
Take Photo: allows you to take a photo with your camera.
Create Folder: allows you to create subfolders under the Pictures folder
in which to store pictures that you take.
Record Video: allows you to take a video with your camera.
Create Folder: allows you to create subfolders under the Videos folder in
which to store videos that you take.
•
More: allows you to select one of the following options:
If you highlight a video but do not press the
following options are available:
key, the
–
Sort by: allows you to sort the list of graphics by either: Name, Date,
Size, or Type.
•
•
Play: allows you to view the video.
–
Properties: allows you to view the properties of a graphic.
Send: lets you send the currently selected video via Multimedia
Message, to Online Album, or via Bluetooth.
•
•
Delete: lets you delete Selected or Multiple video files.
Rename: lets you rename the file.
66
•
•
Move: lets you move Selected or Multiple files to a different storage
location.
Used Space
This option lets you view the memory usage on your phone and on
a Memory Card, if installed. This option also lets you view the files
stored in each folder and lets you delete unwanted files. It also
show you total available memory on your phone and Memory
Card.
Copy: lets you copy Selected or Multiple files to a different storage
location.
•
•
Record Video: allows you to take a video with your camera.
Create Folder: allows you to create subfolders under the Videos folder in
which to store videos that you take.
1. In Idle mode, press
Media Used Space and
key.
•
More: allows you to select one of the following options:
press the Select soft key or the
–
Lock/Unlock: lets you lock the file to prevent accidental deletion, or unlock to
allow deletion.
2. Use the Left and Right navigation keys to select On Phone
–
–
Bluetooth Visibility: makes your phone visible to other Bluetooth devices.
Sort by: allows you to sort the list of graphics by either: Name, Date,
Size, or Type.
Properties: allows you to view the properties of a video, such as Track
length and Format.
or On Card. The following folders are listed:
• On Phone
:
–
–
Available: Shows amount of total available memory on your phone.
–
Audio: Shows amount of memory used to store Tones, Music, and
Recorded Audio files.
Other Files
This option allows you to view and manage other types of files
stored on your phone or memory card. These files may be
classified as Audio, Graphics, Videos, Albums, and Music.
–
–
–
Pictures: Shows amount of memory used to store photos.
Videos: Shows amount of memory used to store video clips.
Other Files: Shows amount of memory used to store other types of
files, such as documents.
–
Games: Shows amount of memory used to store games.
1. In Idle mode, press
Media Other Files and
key.
• On Card
:
press the Select soft key or the
–
–
Available: Shows amount of total available memory on your Card.
Audio: Shows amount of memory used to store Tones, Music, and
Recorded Audio files.
Media
67
–
–
Pictures: Shows amount of memory used to store photos.
Videos: Shows amount of memory used to store video clips.
3. To view the contents of a folder, use the Up and Down
navigation keys to highlight a folder you wish to view, then
press the Select soft key or the
4. To delete files, highlight a file that you want to delete from
the folder and press the key to place a check mark
key.
next to the selection (or place a check mark next to All).
5. Press the Delete soft key.
6. At the “Delete?” prompt press the Yes soft key to delete the
entry, or the No soft key to cancel.
68
Section 12: Games & Applications
Games
Applications
The Games menu option allows you to access games that are on
the phone and also shop for games. You can download new
games and then save them to the Games & Apps folder.
The Applications menu option allows you to access applications
that are on the phone and also shop for applications. You can
download applications and then save them to the Games & Apps
folder.
1. Press
2. From the menu, select a pre-installed game or Get New
Games
Games & Apps.
1. Press
2. From the menu, select a pre-installed application or Get New
Applications
Games & Apps.
.
.
3. Follow the on-screen instructions.
3. Follow the on-screen instructions.
Get New Games
1. Press
Get New Applications
Games & Apps Get New Games.
1. Press
Games & Apps Get New Applications.
2. Follow the on-screen instructions. The file is downloaded
2. Follow the on-screen instructions to purchase the new
application. The file is downloaded and stored in the Games
& Apps folder.
and stored in the Games folder.
3. To access a new game, select the entry from the available
list.
3. To access a new application, select the entry from the
Note: Service charges and subscription purchase may be required.
available list.
Note: Service charges and subscription purchase may be required.
Games & Applications
69
Section 13: Tools
The Tools application provides access to and allows you to use the
Camera, Voice Recognition, Record Audio, Alarms, Calendar
Tasks, Memo, Calculator, Tip Calculator, Converter (for Currency,
Length, Weight, Volume, Area, and Temperature), World Clock,
Timer, and Stopwatch.
2. At the voice prompt, say a command. Following is a list of
available commands.
Note: This list of voice commands briefly displays.
Say a Command Options
Camera
•
Call <Name or #>: dials a name or number listed in your contact list. If
multiple numbers exist (i.e. home, work, or other) say the name and the
number type (location).
The Camera can be accessed from this menu as well as from the
main menu. For information on using the Camera, For more
•
•
Send Message <Name or #>: displays the Create Text Message screen.
Lookup <Name>: allows you use a voice command to locate and
display contact information stored in the Contacts list.
Go To <Menu>: accesses all the features of your phone if they are
activated, such as: Voice mail, Contacts, Ringtones, Calendar, Tasks,
and Browser.
Voice Recognition
Nuance Voice Recognition software is an advanced speech
recognition software used to activate a wide variety of functions on
your phone. Nuance software automatically voice activates (up to
1,000 contacts) for voice dialing and searching. No pre-recording
or training needed. Speak a contact name naturally to dial, and
use your voice to look up contacts, launch applications and
navigate phone menus.
•
•
Check <Item>: lets you check your phone's status in the same report
(Status, Messages, Missed Calls, Time, Signal strength, Network,
Battery, My Phone Number, and Volume).
1. Press
ToolsVoice Recognition.
While the Say a Command screen displays you have two options:
•
•
Tutorial: provides examples of how to use the voice commands.
Settings: lists the settings for voice command software such as:
Confirmation, Adaptation, Audio Modes, Speakerphone, and About.
70
Speak clearly when giving your command. There is no need for
you to speak slowly or with added emphasis. The voice recognition
software has been optimized to understand your speech in its
natural form. If it does not recognize your command after a few
seconds, a voice prompt asks you to repeat the command. If it
does not recognize your command again, the following message
displays “Sorry, no match found,” and voice recognition turns off.
When you add or change contacts, the software automatically
reloads and voice-activates the list when you add or modify a
contact.
Record Audio
Record Audio allows you to record voice memos. It also allows you
to send your audio clip to other people as an attachment to an
MMS message. Recording time is limited to free memory space
available. Recorded audio clips are saved to the Recorded Audio
You must end your current Voice Commands call before you can
make another call using Voice Commands. You can only originate
the first call in a 3-way call using Voice Commands.
1. In Idle mode, press
Tools, and press the Select
Voice Recognition Tips
soft key or the
key.
•
•
•
Wait for the tone before you speak.
2. Highlight Record Audio and press the Select soft key or
the key.
3. Options before the audio recording is made are:
Record: allows you to start recording an audio clip.
• My Voice Clips: allows you to view your audio clips.
Speak clearly and at a normal volume.
There is no need to use paused speech. The voice recognition software
has been trained to recognize natural speech, and performs best when
you speak naturally.
•
•
In very noise environments, it may be helpful to use a headset or a
Bluetooth headset.
•
Record Audio Settings: allows you to set the Default Name and
Recording Time (1 minute, 2 minutes, 3 minutes, 4 minutes, 5
minutes, 60 minutes, or Limit for MMS).
Contacts List Voice Activation
On startup, Nuance Voice Recognition software reads your
Contacts list and voice-activates all the names.
1Press the
key to begin recording. Speak clearly into the
microphone.
Tools
71
4. Press the Stop soft key to stop the recording or pause the
recording by pressing the key. Once the audio
6. To exit, press the Back soft key or the
Alarms
This feature allows you to:
key.
recording stops, the message automatically saves.
5. Press the Options soft key to display the following options:
•
•
set alarm s to ring at a specific time.
set the phone to sound alarms even if the phone is switched off.
•
•
Play: allows you to play the voice clip.
To set an alarm:
Record: allows you to save the current voice clip and begin
another session.
1. In Idle mode, press
soft key or the
Tools and press the Select
• My Voice Clips: allows you to view your audio clips.
key.
•
Record Audio Settings: allows you to set Default Name and
Recording Time (1 minute, 2 minutes, 3 minutes, 4 minutes, 5
minutes, 60 minutes, or Limit for MMS).
2. Highlight Alarms and press the Select soft key or the
key. The following options display:
•
Send via: allows you to send your voice clip to other people by
using a message or to a Bluetooth device.
•
Wake-up Alarm: the alarm rings to wake you up at the
specified time.
•
•
•
Set as: allows you to set the voice clip as an alarm tone.
Delete: allows you to delete the voice clip.
•
•
•
•
•
Alarm 1: primary alarm setting.
Alarm 2: secondary alarm setting.
Alarm 3: third alarm setting.
Alarm 4: fourth alarm setting.
More: allows you to select the following options:
–
–
Rename: allows you to change the voice clip’s name.
Lock/Unlock: allows you to lock the Audio file to prevent deletion or
Auto Power-up: the alarm rings even when the phone is
turned off.
unlock the Audio file to allow deletion.
–
–
Bluetooth Visibility: allows you to make the audio file visible to a
Bluetooth device.
3. Select an alarm type and press Options Select or the
key.
Properties: Name, Format, Size, Forwarding, Date created, and
Location.
4. Set the following options:
72
•
•
•
Name: allows you to use a specific name for the alarm. The name
displays on the screen when the alarm activates. Does not
display if the alarm type is Wake-up Alarm.
•
Repeat: sets the number of times this alarm repeats (1 Time, 2
Times, 3 Times, 5 Times, or 10 Times). Snooze must be turned
on to enable this feature.
Alarm Activation
:
On actives the feature and Off deactivates the
5. Press the
key to save the changes.
feature. Use the right or left navigation key to select On to edit the
remaining fields.
Note: To stop the alarm when it rings, press any key or press the volume keys.
Press OK soft key to turn off the alarm.
Alarm Time: use the alphanumeric keypad enter a time for the
alarm to sound.
Setting Auto Power-up Alarms
Note: Your phone is preset to a 12-hour format. To change the time format,
You can set the phone to ring the alarm at the preset time, even if
the phone is switched off.
•
Alarm Type: press the
notification (Melody, Vibration, Vibration then Melody, or Vibration
and Melody)
key to select a type of alert
1. In Idle mode, press
Tools and press the Select
soft key or the
key.
2. Highlight Alarms and press the Select soft key or the
•
•
•
Alarm Tone: press the
Ringtones folder.
key to select a tone from the
key.
Alarm Volume: press the Left and Right Navigation key to adjust
the volume level (1-7).
3. Select Auto Power-up and press the
key.
4. Highlight On and press the Save soft key or the
key
Recurrence: press the
menu. Highlight each day you want the alarm to sound and press
the key to place a check mark beside the day entry. Press
key to access the Recurrence
to activate the Autopower feature.
the OK soft key to save your settings.
Note: If the menu option is set to Off, and the phone is switched off at the
•
Snooze: use this option to set the snooze feature for the alarm
(Off, 5 Minutes, 10 Minutes, 15 Minutes, 20 Minutes, or 30
Minutes).
specified time, the alarm does not ring.
5. Press the
key to return to Idle mode.
Tools
73
•
•
Event List: this option lists all the available calendar events.
Calendar
Delete: this option allows you to delete Selected events, Periods,
This Month, Before Date, or All from the calendar.
The calendar feature allows you to view the calendar in Month,
Week, and Day layout views. You can also create Appointment,
Anniversary, Holiday, Important, or Private entries. It also shows
any Missed Alarm Events that have occurred.
•
Settings: this option allows you to configure the Calendar’s
Starting Day and Default View Mode.
•
•
Missed Alarm Events: this option displays any missed events.
To access the Calender menu, use the following steps:
Used Space: this option displays a list of the different Calendar
event categories along with the memory allocation for each.
1. In Idle mode, press
Tools and press the Select
soft key or the
key.
Appointment
1. In Idle mode, press
soft key or the
2. Highlight Calendar and press the Select soft key or the
Tools and press the Select
key.
key.
2. Highlight Calendar and press the Select soft key or the
Tip: In Idle mode, a quick press of the
key displays the Calendar in
Month view.
key.
3. Press the Options soft key. Highlight Create and press the
3. options for the Calendar include:
Right Navigation key.
•
•
View: this option allows you to view the selected day.
4. Highlight Appointment, and press the Select soft key or
View by: this option allows you to change the view mode to Day
View, Week View, or Month View (depending on which view was
selected).
the
key. The following options display:
•
•
Title: enter a title for this appointment (up to 15 characters).
•
•
Create: this option allows you to create an Appointment,
Anniversary, Holiday, Important or Private calendar event.
Details: enter a description for this appointment (up to 100
characters).
Go to: this option allows you to view the calendar for today or
another specified date.
•
Start Date: enter a date for this appointment.
74
•
Start Time: enter a time for this appointment. Use the Right
Navigation key to select AM or PM for the start time of the
scheduled event.
5. Press the
key to save this new appointment entry.
Anniversary
1. In Idle mode, press
Tools and press the Select
•
•
End Date: enter a date for this appointment to end.
soft key or the
key.
End Time: enter a time for this appointment to end. Use the
Right Navigation key to select AM or PM for the start time of the
scheduled event.
2. Highlight Calendar and press the Select soft key or the
key.
•
•
Location: enter a location description for this appointment (up to
15 characters).
3. Press the Options soft key. Highlight Create, select
Anniversary, and press the Select soft key or the
key to use the following options:
Alarm: allows you to set an alarm for this event. Press the
key to select this option. Once selected, all remaining alarm
settings enable.
•
•
•
•
Title: enter a title for this occasion (up to 15 characters).
Details: enter details for the occasion (up to 100 characters).
Date: enter a date for this anniversary.
–
Before: allows you to set the amount of time (min, hour, day) before
your appointment that you wish the alarm to sound.
–
Alarm Tone: allows you to choose an alarm tone. Once highlighted,
press the
key to select this audio file.
Alarm: press the
key to set an alarm for this event. Once
•
Repeat: allows you to set the number of repetitions allowed for
selected, all remaining alarm settings enable.
this appointment (Daily, Weekly, or Monthly). Press the
to select this option. Once selected, the following settings are
enabled.
key
–
–
–
Before: allows you to set the amount of time you want the alarm to
sound, prior to the appointment.
Alarm Time: allows you to enter a time the alarm begins to notify you
of the occasion. Use the Right Navigation key to select AM or PM
–
–
–
Every: allows you to set the number of times the entry is to repeat in
the selected time frame.
.
Alarm Tone: press the
key to select an audio file for this alarm
Except Weekends: allows you to exempt non-work days (weekends)
from the appointment schedule.
tone.
Until: allows you to set as duration for this appointment by assigning
an expiration date.
Tools
75
•
Repeat Every Year: allows you to set whether this entry is
3. Select the date of the event you want to view and press the
repeated on a yearly basis. Press the
option.
key to select this
key.
Icons displayed beside each event indicate the type of event.
4. Press the
key to save this new anniversary entry.
Indicates an Appointment.
Note: The remaining Calendar entry types (Holiday Important, or Private
,
entries) contain similar fields and use similar creation procedures.
Indicates an Anniversary.
Indicates an Important event.
Indicates a Holiday.
Other Event Options
1. In Idle mode, press
Tools and press the Select
soft key or the
key.
2. Highlight Calendar and press the Select soft key or the
Indicates a Private event.
key.
If there is an alarm or alarms set, the
the end of the event description.
icon displays at
3. Select a day containing a Calendar entry and press the
key. If the selected day has one or more Calendar
entries, those are displayed in a list.
4. Press the Up or Down Navigation key to scroll to the
previous or next event. Highlight an entry and press the
Options soft key to use one of the following Calendar entry
options:
Viewing an Event
1. In Idle mode, press
Tools and press the Select
soft key or the
key.
•
•
View: this option allows you view the details for a selected event.
2. Highlight Calendar and press the Select soft key or the
key. The calendar displays with today’s date
highlighted.
View by: this option allows you view the Calendar entries in one
of three modes, depending on the mode you selected: Week
76
View (one week at a time), Month View (one month at a time), or
Day View (one day at a time).
1. In Idle mode, press
Tools and press the Select
soft key or the
key.
•
•
•
Create: this option allows you to add an additional event to the
selected day(s).
2. Highlight Tasks and press the Select soft key or the
key.
Send via: this option allows you to send a listing of the event via a
Multimedia message or via Bluetooth.
3. Press the Options soft key. Highlight Create, and press the
Event List: this option allows you view a list of all currently active
events by type (Appointment, Anniversary, Holiday, Important, or
Private).
Select soft key or the
key. Enter the task information:
•
•
Title: enter a title for this task (up to 15 characters).
Details: enter a detailed description for this task (up to 100
characters).
•
•
Delete: this option allows you to delete a selected or all events.
Save to media: allows you to save the calendar entry to your
Media folder.
•
•
•
Start Date: enter a date for this task to begin.
Due Date: enter a date for this task to end.
•
•
Print via Bluetooth: allows you to send the event listing to a
Bluetooth printer.
Alarm: allows you to set an alarm for this event. Press the
key to select this option. Once selected, all remaining alarm
settings are enabled.
Settings: this option allows you to configure the Calendar’s
Starting Day (select either Sunday or Monday) and Default View
Mode (select Month, Week, or Day view).
–
–
–
Alarm Date: allows you to the specify the date you wish the alarm to
sound.
•
•
Missed Alarm Events: this option displays any missed events.
Alarm Time: enter a time for this alarm to sound. Use the Right
Navigation key to select AM or PM for the start time of the alarm.
Used Space: this option displays a list of the different Calendar
event categories along with the memory allocation for each.
Alarm Tone: allows you to choose an alarm tone. Once highlighted,
5. Press the
key to return to Idle mode.
press the
Priority: allows you assign the task a priority (1, 2, or 3).
key to save this new task entry.
key to select this audio file.
Tasks
•
This menu option allows you to create a “to do” list of tasks to be
completed.
4. Press the
Tools
77
Memo
Note: To include a decimal point or a bracket, press the Left soft key until the
symbol you want displays.
This option allows you to create and save memos. To create a
memo:
4. Enter the operation for your calculation by pressing the
1. In Idle mode, press
Tools and press the Select
Navigation keys, according to the illustration on the display.
soft key or the
key.
5. Enter the second number.
2. Highlight Memo and press the Select soft key or the
6. To view the result, press the
key.
key.
Tip Calculator
3. Press the Options soft key. Highlight Create, and press the
With this feature, you can use the phone to calculate the amount
of money left as a tip based on parameters such as: total bill
amount, tip percentage, and number of members in your party.
Select soft key or the
key.
4. Enter your text and press the Save soft key (
key) or
press the Options soft key and select Save.
1. In Idle mode, press
Tools and press the Select
Calculator
soft key or the
key.
With this feature, you can use the phone as a calculator. The
calculator provides the basic arithmetic functions; addition,
subtraction, multiplication, and division.
2. Highlight Tip Calculator and press the Select soft key or
the key.
3. Enter the values into the appropriate fields by using the
1. In Idle mode, press
Tools and press the Select
numeric keys:
soft key or the
key.
•
•
•
Bill
2. Highlight Calculator and press the Select soft key or the
Tip(%)
# paying
key.
3. Enter the first number using the numeric keys.
78
4. Use the left and right navigation keys to select the original
Note: To include a decimal point press the
key.
unit type.
4. The remaining fields indicate:
5. Use the navigation keys to select the amount field and enter
•
•
Tip($): the amount of the tip based on the figures entered.
the amount to convert. Press
to insert a decimal.
You pay: your share of the total check amount. This value is
based on the figure entered within the # paying field.
6. Use the navigation keys to select the second Unit field and
to select the final unit type.
Converter
The converted value is displayed below the final unit type.
The converter performs the following types of conversions:
•
•
•
•
To reverse the direction of the conversion, press the Options soft key
and select Reverse
•
•
•
•
•
•
Currency
Length
.
To change the amount to be converted, scroll to the amount field and
enter the new value using the numeric keypad.
Weight
Volume
Area
To perform a different conversion, press the Back soft key to return to
the Converter menu.
Temperature
To change the preset currency conversion rates, press the Options soft
key and select View Rate Edit. Use the navigation keys to select
the base rate to use. Use the navigation key to select the value to be
changed. Enter the new value using the keypad and press the Save soft
1. In Idle mode, press
Tools and press the Select
soft key or the
key.
2. Highlight Converter and press the Select soft key or the
key or
.
key.
World Clock
World Clock allows you to view the time in other parts of the world.
3. Highlight a conversion function and press the Select soft
key or the
key.
Adding a New Time Zone
1. In Idle mode, press
Tools and press the Select
Tools
79
soft key or the
key.
Your time zone and any other added zones display.
2. Highlight World Clock and press the Select soft key or the
3. Highlight the time zone you want to change, select Options
key.
Edit and press the
key.
Your time zone will display with a list of cities, date, and
time.
4. Use the Left or Right Navigation key to highlight the time
zone you wish to add.
3. To add a new time zone, select Options Add and press
5. If Daylight Saving time applies, highlight the Daylight Saving
the
key.
field and press
to place a checkmark in the box.
4. Use the Left or Right Navigation key to highlight the time
6. Press the Save soft key to save your changes.
zone you wish to add.
Timer
5. If Daylight Saving time applies, highlight the Daylight Saving
The Timer allows you to count down from a preset time to zero. An
alarm plays when the time reaches zero.
field and press
to place a checkmark in the box.
1. In Idle mode, press
Tools and press the Select
6. Press the Save soft key to save your changes.
soft key or the
key.
7. The new time zone will be displayed.
2. Highlight Timer and press the Select soft key or the
Editing a Time Zone
key.
To change a displayed a time zone, follow these steps:
3. Press the Set soft key to enter the length of time.
1. In Idle mode, press
Tools and press the Select
4. Enter the time and press the OK soft key.
soft key or the
key.
5. Press the
stop the timer.
key to start the timer. Press the
key to
2. Highlight World Clock and press the Select soft key or the
key.
80
Stopwatch
The Stopwatch allows you to time an event and measure sub-
intervals, such as lap times. To use the stopwatch:
1. In Idle mode, press
Tools and press the Select
soft key or the
key.
2. Highlight Stopwatch and press the Select soft key or the
key.
3. Press the
key to start the stopwatch. Also press the
key to record Lap times.
4. Press the Stop soft key to stop the stopwatch. Press the
Reset soft key to erase all times recorded.
Tools
81
Section 14: Camera
Using the Camera
Camera Options
Taking Photos
1. In Idle mode, press and hold the Camera key on the left side
Camera options are represented by icons across the top of the
screen. Use the Navigation keys and then select Menu to access
the various choices for each icon.
of the phone
– or –
The icons are defined in the following:
Press
Tools Camera and press the Select soft
Cameramode:switchesbetweenCameraandCamcorder.
Once you change the mode, the corresponding indicator
displays at the top left of the screen.
key or the
key.
2. Aim the lens at the subject.
3. Make any necessary adjustments using the Menu soft key
and the navigation keys to access camera options (see
below). You can also use the keypad to quickly change the
camera options using the camera shortcut keys.
4. Press the
key to take the photo.
Note: Your camera produces photos in JPEG format. The number that
displays in the lower-left of the screen indicates the current number of
pictures that were saved to the selected media and an approximate
number of total pictures you can take using the current image size.
82
White Balance: allows you to set the white balance for the
camera. Choose Auto, Daylight, Incandescent,
Fluorescent, or Cloudy.
Shooting mode: allows you to set the shooting mode.
Options are:
•
Single Shot: allows you to take a single photo and view
it before returning to the shooting mode.
Multi-Shot: allows you to take a series of photos in
quick succession.
Mosaic Shot: allows you to take up to nine photos and
Night Shot Mode: allows you to set the camera to Night
Shot Mode for taking photographs in low light conditions.
•
Set to On or Off
.
•
Self Timer: delays the camera shutter by either 3, 5, or 10
seconds after you press the key.
then have them grouped together into a single final
image.
•
Frame Shot: allows you to choose a custom frame
Effects:allowsyoutochooseacustomcolourtoneforyour
border for your photo. Choose from one of the 20
available frames.
photo. Choose from the following:
•
•
No Effects: removes all custom colour tones.
Black & White: removes all colour and display the
•
Panorama: allows you to take a panoramic image by
combining a series of 3, 4, 5 or 6 photos. Align the
moving frame at the centre of the screen.
picture as grayscale.
Sepia: adds a sepia tint to the picture to make it look
like an old black and white photograph.
•
Photo size: allows you to set the resolution of the photo.
Options are:
•
Negative: changes the image to a negative image.
•
•
•
•
1600x1200 (2M)
1280x960 (1.3M)
640x480 (0.3M)
320x240
Camera
83
Camera Options after Taking a Photo
Shortcuts: allows you to view the currently specified
After you have taken a photo, you can use various options by
pressing the Options soft key. Highlight an option and press the
key.
keypad shortcuts for Camera/Camcorder mode.
Settings: allows you to customize your camera settings.
Choose the following options:
The following options are available:
General:
•
Send: allows you to attach the photo to a message, send it to Online
Album, or send it via Bluetooth.
•
Shutter Sound: allows you to select a shutter tone
sound when taking a photo.
Default Storage: allows you to set a default storage
•
Set as: allows you to set the photo as your wallpaper or set the photo as
a Caller ID for a contact.
•
location for the photos taken on your phone. Choose
Phone or Memory Card.
•
•
Delete: allows you to delete the photo.
Rotate: allows you to rotate the image from Portrait to Landscape.
Camera:
Using the View Option
•
Quality: allows you to select the picture quality setting.
Choose High, Normal, or Economy.
Single Shot Mode: allows you to select between Take
The View option of the Camera/Camcorder opens the Pictures or
Videos folder, allowing you to access previously taken photos or
videos. These folders can also be accessed from the Media menu.
•
and Review or Take and Preview.
If you press the View soft key to view the list of photos from the
camera viewfinder, the following options are available by pressing
the Options soft key:
Camcorder:
•
Quality: allows you to select between High, Normal, or
Economy.
•
•
View: allows you to view the photo.
•
Movie Format: allows you to choose the default movie
Send: allows you to send the photo using a Multimedia Message, send it
to Online Album, or send it to a Bluetooth device.
format, either MP4 or 3GP.
•
Set as: allows you to set the currently selected graphic to display on the
Main Display, the Front Display, or assigned to a Caller ID.
84
•
•
•
Delete: allows you to delete Selected or Multiple files.
Rename: allows you to rename the selected file.
Move: allows you to move either a Selected or Multiple files to a different
folder.
•
Set as: allows you to set the photo as your wallpaper on your Main
Display, Front Display, or set the photo as a Caller ID for a contact.
Delete: allows you to delete the photo you have taken.
Rename: allows you to rename the photo.
•
•
•
•
•
•
Copy: allows you to make a copy of the Selected or Multiple files.
Create Folder: allows you to create a new folder for file storage.
More: provides access to the following options:
Edit: allows you to edit the photo using the following options:
- Save as: allows you to change the name of the image.
- Effects: allows you to choose effects such as Filter, Style, Warp,
and Partial Blur.
- Adjust: allows you to make adjustments on the Brightness,
Contrast, or Color of the photo.
- Transform: allows you to Resize, Rotate, or Flip the photo.
- Crop: allows you to move the Navigation key to select the portion
of the image you want to crop.
- Insert: allows you to add Frames, Cliparts, Emoticon, or Text to a
photo.
–
–
–
–
–
Lock/Unlock: allows you to lock/unlock the photo. Lock prevents the
photo from being deleted, unlock releases it so that it can be deleted.
Bluetooth Visibility: allows you to select either Selected or Multiple
graphics visibility to Bluetooth devices.
Sort by: allows you to sort the list of graphics by either: Date, Type,
Name, or Size.
Print via: allows you to make a selected graphic printable by either USB
or Bluetooth printer.
Properties: allows you to view the properties of a photo.
- Set as: allows you to set the photo as wallpaper for the Main
Display, Front Display, or assign it to a Caller ID.
- Send: allows you to send the photo using a Multimedia Message,
send to Online Album, or send to a Bluetooth device.
Editing a Photo
Once you have selected and loaded a photo, the following options
are available for editing and management of the photo by pressing
the Options soft key.
•
More: provides access to the following options:
–
–
–
Slide Show
folder.
Lock/Unlock
:
allows you create a slide show of graphics in your Pictures
•
•
Zoom: allows you to zoom in or out using the volume keys.
Send: allows you to send the photo using a Multimedia Message, send it
to Online Album, or send it to a Bluetooth device.
:
allows you to lock/unlock the photo. Lock prevents
deletion, unlock allows deletion.
Bluetooth Visibility allows you to enable visibility to Bluetooth devices.
:
Camera 85
–
–
Print via: allows you to print the photo using a USB or Bluetooth
connection.
4. Press the
key to begin capturing video.
5. Press the Stop soft key to stop the recording and save the
Properties allows you to view the properties of a photo.
:
video file to your Video folder.
Using the Camcorder
Shooting Video
6. Save the video and press the
key to play it back.
7. Press the key to return to the camcorder preview.
Tip: When shooting video in direct sunlight or in bright conditions, it is recommended
that you provide your subject with sufficient light by having the light source
behind you.
Tip: You can use the keypad to quickly change the camcorder options using
the shortcut keys.
1. In Idle mode, press and hold the Camera key on the left side
Camcorder Options
of the phone
– or –
Camcorder options are represented by icons across the top of the
screen. Select the Menu soft key to access the various choices for
each icon.
Press
Tools Camera and press the Select soft
key or the
key.
2. Press the
key twice to switch to the camcorder.
– or –
Press the Menu soft key, which activates the icons across
the top of the display, use the navigation keys to select the
icon, then select the Camcorder option from the drop
down list.
3. Adjust the image by aiming the camcorder at the subject.
86
Following is a list of the Camcorder icons:
Timer: allows you to set a time delay before the camcorder
takes the video clip.
Camcordermode:allowsyoutoswitchfromtakingaphoto
to shooting a video clip using the camera’s camcorder
mode.
•
•
•
•
Off
3 sec
5 sec
10 sec
Shooting mode: allows you to set the shooting mode.
Options are:
Effects: allows you to choose a custom color tone for your
video clip. Choose from the following:
•
•
Normal: records video clip in Normal mode.
Multimedia Message: records a video clip (with a
•
No Effects: automatically adjust the video for the best
quality available.
Black & White: removes all color and display the video
as grayscale/black and white.
Sepia: adds a sepia tint to the video clip. This is the
specific size limit) to transmit in a Multimedia Message.
•
176
144
Videoclipsize:indicatestherecordingsizeoftheresulting
video clip. Options are176x144 and 320x240 (Normal
shooting mode only).
•
common orange tint that was popular in early
photography.
White Balance: allows you to set the white balance for the
camcorder. Choose Auto, Daylight, Incandescent,
Fluorescent, or Cloudy.
•
Negative: changes the video image to a negative
image display.
Record Audio: allows you to turn On/Off recording audio
with the video clip.
Camera
87
Camcorder Options after a Video is Taken
Shortcuts: allows you to view the currently specified
shortcuts for Camera/Camcorder mode.
After you have shot a video, press the Options soft key to select
various options. Highlight an option and press the
following options are available:
key. The
Settings: allows you to customize your camera settings.
Choose the following options:
•
Send via: allows you to attach the video to a Multimedia Message, send it
to Online Album, or send it to a Bluetooth device.
General:
•
Delete: allows you to delete a video clip.
•
Shutter Sound: allows you to select a shutter tone
sound when taking a photo.
Default Storage: allows you to set a default storage
The Right soft key displays Camcorder, which allows you to return
to the Camcorder view finder.
•
location for the photos taken on your phone. Choose
Phone or Memory Card.
Accessing the Video Folder
1. In Idle mode, press
Media, and press the Select
Camera:
soft key or the
key.
•
Quality: allows you to select the picture quality setting.
Choose High, Normal, or Economy.
Single Shot Mode: allows you to select between Take
2. Highlight Videos and press the
key.
•
3. Select a video file and press the
key to play the video.
and Review or Take and Preview.
Options available when you highlight the video clip, but before you
play the clip:
Camcorder:
•
Quality: allows you to select between High, Normal, or
•
•
Play: uses the Media Player to view the video segment.
Send: allows you to attach the video to a Multimedia Message, send it to
Online Album, or send it to a Bluetooth device.
Economy.
•
Movie Format: allows you to choose the default movie
format, either MP4, or 3GP.
•
•
•
Delete: allows you to delete the Selected video, or Multiple videos.
Rename: allows you to rename the video file.
Move: allows you to choose the Selected or Multiple videos to move.
88
•
•
•
•
Copy: allows you to copy a selected or multiple videos.
Record Video: allows you to shoot a video with your camcorder.
Create Folder: allows you to create a folder within the Video folder.
More: provides access to the following options:
Once the video completes playing, or you select the Stop option,
the following options are available:
•
•
Play: allows you to replay the video clip.
Send via: allows you to send the video clip via a multimedia message,
or send it to a Bluetooth device.
–
Lock/Unlock: allows you to lock the video file to prevent deletion, or
unlock the video file to allow deletion.
•
Properties: allows you to view the properties for this video file.
–
Bluetooth Visibility: allows you to make the Selected or Multiple videos
visible to Bluetooth devices.
–
–
Sort by: allows you to sort the videos by Name, Date, Size or Type.
Properties: allows you to view the properties for this video file.
Once you select the video to play, options are:
•
Pause/Resume: allows you to pause the video being played, and then
resume playing.
•
•
Stop: allows you to stop the video being played.
Transfer to Bluetooth Headset: allows you to listen to the video through
your Bluetooth headset.
•
•
•
•
Jump to Track Time: allows you to jump ahead to a specific time in the
track.
Send via: allows you to send the video clip via a multimedia message, or
send it to a Bluetooth device.
Portrait/Landscape Mode: allows you to rotate the video to Portrait/
Landscape format.
Properties: allows you to view the properties for this video file.
Camera
89
Section 15: Changing Your Settings
This section includes procedures on how to use some of use some
of your phone’s features, as well as how to change and customize
the display settings, call handling, security settings, and other
settings associated with your phone.
3. Select one of the following categories and press the Change
soft key to change the setting:
Call Tab:
–
Call Alert Type: allows you to select the way in which the selected
Sound Profile
ringtone is played when a call comes in on the phone.
You can customize various sound profiles for your phone by
changing the sound settings.
•
•
•
Melody: the phone sounds the selected melody.
Vibration: the phone vibrates.
1. In Idle mode, press
Settings Sound Profile
key.
Vibration then Melody: the phone vibrates initially, but then plays
the melody.
and press the Select soft key or the
•
Vibration and Melody: the phone vibrates and also plays the
melody.
2. Select one of available options and press the Edit soft key
to access the sound settings.
–
–
Voice Call Ringtone: allows you to select a ringtone from your Ringtones
(Phone) folder which contains not only the default phone ringtones, but
also any new downloaded ringtones.
Ringtone Volume: allows you to select the volume for the ringtone.The
range is from 1-7.
3. Press the Change soft key to change a particular settings.
4. Press the Save soft key when you are finished.
Normal Profile
1. Press the Edit soft key to access the available options for
this calling profile.
Message Tab:
Message Alert Type: allows you to select the way in which the selected
alert is played when a new text or multimedia message is received.
–
2. Use the Left and Right Navigation keys to move between
•
•
Melody: the phone sounds the selected melody.
the various tabs.
Vibration: the phone vibrates.
90
•
•
Vibration and Melody: the phone vibrates and also plays the
melody.
•
•
Vibration and Melody: the phone vibrates and also plays the
melody.
Mute: the phone neither vibrates nor plays a ringtone. The only
indication of a message is an alert on the display.
Mute: the phone neither vibrates nor plays a melody.
–
Phone Sound Volume: allows you to set the volume of the phone from
power on. Changes made while using the phone are not reflected in this
default when the phone is powered off and then back on.
–
–
–
Message Alert Tone: allows you select the tone played on receipt of a
message.
Message Alert Repetition: allows you choose how the tone is repeated:
once or periodic.
Message Tone Volume: allows you to select the volume that the alert
tone is played. The range is from 1-7.
Other Available Profiles
The phone can be set to additional audio profiles available via the
Profiles menu. Although profiles are similar, each profile is preset
with different audio parameters for incoming phone call alerts,
message alerts, and phone usage. For more information, refer to
Phone Tab:
–
Keypad Tone: allows you to choose between Beep
,
Metallic, Musicbox,
Glossy, and Mute (no tone) for keystrokes on the phone.
–
Power On Type: allows you to select the way in which the selected alert
is played when the phone is powered on.
The Silent profile causes the speaker to mute and the
phone only vibrates or displays information on its LCD.
•
•
•
Melody: the phone sounds the selected melody.
Vibration: the phone vibrates.
Vibration and Melody: the phone vibrates and also plays the
melody.
•
Mute: the phone neither vibrates nor plays a melody.
–
Power Off Type: allows you to select the way in which the selected alert
is played when the phone is powered off.
•
•
Melody: the phone sounds the selected melody.
Vibration: the phone vibrates.
Changing Your Settings
91
press the Select soft key or the
key.
Note: The Silent profile can also be activated by pressing and holding the
key or by reducing the volume to 0. An on screen message notifies you
that the Silent profile is now active. To deactivate this profile, press and
The following options are available:
•
•
•
Main Display
Front Display
Light Settings
hold the
key again or increase the volume using the volume key.
The Driving profile keeps the speaker active and
launches the currently selected ringtone or melody when
theassociatednotificationactivates. Youmayalsosetthe
phone to automatically reply to a voice call or send an
automated reply to an incoming text message.
2. Select an option, then press the
key to access
the following:
Main Display
•
Wallpaper: allows you to select Picture or None. None leaves the
wallpaper blank. Press the Edit soft key, and scroll through the graphics
in your Pictures folder (on the Phone or on the Memory card) to select
TheOutdoorprofilekeepsthespeakeractive,thevolume
settings are raised to their highest levels, any currently
active ringtones or melodies are activated, and the
phone’s vibrate feature activates. You may also set the
phone to automatically reply to a voice call or send an
automated reply to an incoming text message.
your wallpaper. Press the Select soft key or the
key to confirm
the selection.
•
•
Menu Style
presented in either a Grid Menu style or List Menu style. Make a
selection and press the Select soft key or the key.
Dialing Display allows you to select display properties:
Font Type: allows you to select the font to display Press the Left or Right
Navigation keys to make your selection. Choose from Normal 1 Normal 2
key to confirm your
:
allows you to select whether the phone’s menus are
Note: To make changes to a profile, highlight the desired Profile on the Sound
:
Profile screen and press the Edit
then press the Save soft key.
key. Make any changes you want,
–
–
.
,
,
Display
or Use Theme. Press the Save soft key or the
selection.
In this menu, you can change various settings for the display or
backlight.
Font Size: allows you to select a size for the selected font. Press the Left
or Right Navigation keys to make your selection. Choose from Large
,
1. In Idle mode, press
Settings Display and
92
Medium, or Small. Press the Save soft key or the
your selection.
key to confirm
Front Display
•
Wallpaper: allows you to select from Clock, My image, or Screen
–
–
Font Colour: allows you to select a colour for the selected font. Press the
Left or Right Navigation keys to make your selection. Choose from
Slogan.
–
To set the Clock style, highlight the Clock option, then press the Edit soft
key. Use the Left or Right Navigation keys to access the options of
Digital Clock 1, Digital Clock 2, Analog Clock 1, and Analog Clock 2.
Monochrome Gradation, or Basic. Press the Down Navigation key and
,
select a colour choice. Press the Save soft key or the
key to
confirm your selection.
Press the Save soft key or the
key to confirm your selection.
Background Colour: allows you to select a colour for the background
screen. Press the Left or Right Navigation keys to make your selection.
Press the Save soft key or the
–
To set a Picture as wallpaper, highlight the My Image option, then press
the Edit soft key. Press the Change soft key, and scroll through the
graphics in your Media Pictures folder to select your wallpaper. Use the
soft keys to zoom in or out and the Navigation keys to center the desired
key to confirm your selection.
•
Greeting Message
:
allows you to enter the text to display on the screen
when the phone powers on.
portion of the graphic in the window. Press the
key, then press
Options Set or the key to confirm your selection.
–
To set a Screen Slogan, highlight the Screen Slogan option, and press
the Edit soft key. The text box activates and displays the default slogan.
Use the
options and the keyboard to enter your slogan. Press the Save soft key
or the key to confirm your selection.
key to delete the default slogan, then use the text entry
•
Greeting Message: allows you to enter the text to display on the screen
when the phone powers on.
Changing Your Settings
93
Light Settings
The following options are available. Use the Navigation
keys to scroll and set options:
Note: Light settings can affect the length of time before battery recharge is
necessary.
•
Time Zone Updating: allows you to select how the time zone
information is updated: Automatic (which greys-out some of the
•
•
Brightness: allows you to adjust the display brightness for the LCD to
see it better in different lighting conditions. Press the Left or Right
Navigation keys to adjust the brightness. Press the Save soft key or the
key to confirm your selection.
other options), Prompt First, or Manual Only
.
•
Time Zone: allows you to assign your current time zone based on
Greenwich Mean Time. Major cities in each zone display upon
selection. Press the Change
key, and use the Left or Right
Navigation key to select a new zone. If you want the phone to
automatically adjust to Daylight Saving time, highlight the check
Backlight Time allows you to select the amount of time for the backlight
:
to remain on and the length of time for the actual dimming to occur.
Highlight the On field and press the Change soft key then use the Up or
box and press the Check
key. Press the OK soft key to
save the new selection.
Down Navigation keys to select from 10 Seconds
Minute 3 Minutes, or 10 Minutes. For Dim choose Off
10 Seconds 30 Seconds 1 Minute 3 Minutes or 10 Minutes. Press
key to confirm your selection, then press
,
30 Seconds
,
1
,
,
,
5 Seconds
,
Tip: You can also choose to activate Daylight Savings Time within the Home
Zone menu option.
,
,
,
the OK soft key or the
•
•
Time: allows you to enter the current time using your keypad.
Press the Right Navigation key to select am or pm. Press the
the Save soft key.
Time & Date
This menu allows you to change the current time and date
displayed. You can also find out what time it is in another part of
the world.
Save soft key or the
key to confirm the selection.
Date: allows you to enter the current date using your keypad.
Press the Navigation key to navigate between the month, day, or
year fields. Press the Save soft key or the
key to confirm the
selection.
1. In Idle mode, press
Settings Time & Date and
key.
•
Time Format: allows you to change the time format to 12 Hours
or 24 Hours. Use the Navigation key to select an option. Press the
Save soft key to confirm the selection.
press the Select soft key or the
94
•
Date Format: allows you to change the date format. Use the Left
or Right Navigation key to select between the different options.
Press the Save soft key to confirm the selection.
•
Français: the selected phone language is changed to French.
2. Press the OK soft key or the key to confirm your selection.
3. Press the Save soft key to save your new selection.
Note: Automatic updates of time and date do not change the time set for alarm
Input Language
settings or calendar memos.
The Input Language option sets the language used when entering text
into the phone.
Phone
1. Highlight your selection using the Up or Down Navigation
To customize the settings of your phone use the following steps:
key. Select from the following:
1. In Idle mode, press
Settings Phone and press
•
•
English: the selected phone language is changed to English.
the Select soft key or the
key.
Français: the selected phone language is changed to French.
The following options are available. Use the Navigation
keys to scroll to and set options:
2. Press the OK soft key or the
key to confirm your selection.
3. Press the Save soft key to save your new selection.
Language
The Language option allows you to select a display language. You
can set the Screen Text language or the Input Language.
Screen Text
The Screen Text option allows you to select the phone text.
1. Highlight your selection using the Up or Down Navigation
key. Select from the following:
•
Automatic: the language is automatically selected according to
the language of the SIM card used.
•
English: the selected phone language is changed to English.
Changing Your Settings
95
Shortcuts
Note: You will be prompted to create a password the first time this feature is
enabled.
The Shortcuts option allows you to change the applications
assigned to your Navigation keys.
on page 97. Once you enter the correct password, you can use the
phone until you switch it off. The following options are available:
1. Press a Navigation key and press the Options soft key.
2. Highlight Change and press the
. Select a new
–
On: you are required to enter the phone password when you switch on
application to assign to the navigation key.
the phone.
3. Press the Save soft key or the
key to assign the new
–
Off: you are not asked to enter the phone password when you switch on
the phone.
application.
Lock SIM Card
Own Number
When the Lock SIM Card feature is enabled, your phone only
works with the current SIM. You must enter the lock code to unlock
the SIM so you can use a different SIM card. Once you enter the
lock code, you are asked to confirm your password. Reenter your
password and press the Confirm soft key.
The Own Number option displays the number assigned to the SIM
card in your phone.
Security
The Security feature enables you to restrict the use of your phone
by the others and to restrict the types of calls. Various codes and
passwords are used to protect the features of your phone.
Note: This lock code is typically the last four digits of the current phone
number or can be obtained from your service provider.
The following options are available.
Lock Phone
Check PIN Code
•
When the Check PIN Code feature is enabled, you must enter your PIN
(Personal Identification Number) each time you switch on the phone.
Consequently, any person who does not have your PIN cannot use your
The Lock Phone feature helps to protect your phone against
unauthorized use. When the Lock Phone feature is enabled, the
phone is locked and you must enter the 4- to 8-digit phone
password each time the phone is powered on.
96
–
–
Memo
Contacts
phone without your approval. The PIN is usually supplied with the SIM
card.
Set FDN Mode
The following options are available:
–
–
On: you must enter the PIN each time the phone is switched on.
Off: the phone connects directly to the network when you switch
it on.
FDN (Fixed Dial Number) mode, if supported by your SIM card,
allows you to restrict the outgoing calls to a limited set of phone
numbers. The following options are available:
–
On: you can only call phone numbers stored in the FDN contacts list. You
must enter your PIN2. The following options for entering FDN contacts
are available through Contacts:
Note: Before disabling the Check PIN Code feature, you must enter your PIN.
You can obtain your PIN from your service provider.
Lock Applications
•
•
Full length entries or wild cards can be entered in to the FDN list.
A full length number with a specific contact name can be entered
into the FDN list.
Using this option you can lock various applications. Once you lock
the contents, you must enter the phone’s password to access the
associated menus.
•
Wildcard entries allow you to dial a range of number with a single
entry: ex. 555 – All dialed numbers that begin with 555 are
allowed. Numbers that do not match the conditions in the FDN list
are restricted.
Note: The first time you access the password screen, you will be prompted to
create a password.
–
Off: you can call any number.
The applications options are:
–
–
–
–
–
–
–
All
IM
Note: Entering an asterisk (*) is not required for wild card entries.
Change Phone Password
Messages
Call History
Media
Calendar
Tasks
The Change Phone Password option allows you to change your
current phone password to a new one. Once you enter a new
password, you are asked to confirm it by entering it again.
Changing Your Settings
97
Change Security Code
2. At the All Settings reset to factory defaults. Continue?
prompt, press Yes to reset, or No to cancel.
This option allows you to change your current Security Code to a
new one. Once you enter a new code, you are asked to confirm it
by entering it again.
3. Enter your phone password, and press the Confirm soft
key.
Change PIN Code
4. After the phone settings are reset, the Reset Phone Done
This option allows you to change your current PIN, provided that
the PIN Check feature is enabled. You must enter the current PIN
before you can specify a new one. Once you enter a new PIN, you
are asked to confirm it by entering it again.
confirmation displays.
Once your phone has been reset to its default settings, it will
restart itself in order to activate the new settings.
Change PIN2 Code
Note: User Data such as contacts, messages, pictures, videos, and music is
The Change PIN2 option allows you to change your current PIN2
to a new one. You must enter the current PIN2 before you can
specify a new one. Once you enter a new PIN2, you are asked to
confirm it by entering it again.
not deleted.
Note: If your SIM card does not require a PIN2 password, this menu does not
display.
Reset Phone
You can easily reset your phone to its default settings. To reset
your phone:
1. In Idle mode, select
Phone
Settings Phone Reset
.
98
Restore Phone
T-Coil Mode
The Restore Phone option is similar to the Reset Phone option
described above in that all settings are reset to factory defaults.
However, with the Restore Phone option, all user data is deleted.
T-Coil mode allows you to use a hearing aid with a T-coil setting in
connection with the handset. You can set this mode to Enable or
Disable. When T-Coil Mode is activated, the
icon displays on
the Idle screen.
Warning!: All User Data such as contacts, messages, pictures, videos, and
music is deleted. Ensure that you remove your microSD card if
applicable because it will be erased during the Restore Phone
option.
T-Coil mode can be set to on or off.
1. In Idle mode, press
Settings Phone T-Coil
key.
Mode and press the Select soft key or the
2. Select Enable or Disable and press the Save soft key.
Warning!: When performing the Restore Phone option, do not remove your
battery until the phone completes the task and restarts, otherwise
phone damage may occur.
3. Press the Yes soft key when the T-Coil confirmation
displays.
Airplane Mode
Important!: The hearing aid category specified for this product represents
compatibility only when the phone is flipped open, which has
maximum antenna efficiency. When the option is enabled and the
phone is open during a call, the T-coil adjusts the audio for use
with T-coil hearing aids.
Airplane mode allows you to use many of your phone’s features,
such as Games, Music, Memo, etc., but you cannot send or
receive any calls or access online information. When Airplane
Mode is activated, the
icon displays on the Idle screen.
1. In Idle mode, press
Settings Phone
Airplane Mode and press the Select soft key or the
key.
2. Select On or Off and press the Save soft key.
3. The Airplane mode on/off confirmation displays.
Changing Your Settings
99
Call Answer
Calls
This feature allows you to select how your phone answers incoming
calls.
This menu allows you to change the actions taken by the phone
when dialing and receiving calls.
1. Highlight one of the following options:
In Idle mode, press
Select soft key or the
available.
Settings Calls and press the
• Send Key: allows you to answer an incoming call by pressing
key. The following options are
either the Accept soft key or the
key.
• Open Flip: allows you to answer an incoming call by just opening
the phone.
General
• Any Key: allows you to answer an incoming call by pressing any
This allows you to configure some common high level parameters
used by the phone for most types of calls.
key on the phone except the
key.
2. Press Options Saveto save your selection.
Show My Number
Auto Reply
This feature allows you to select how your ID is handled when an
outgoing call is initiated.
This feature allows you to enter an automatic reply to messages
when the mode is activated.
Highlight your selection and press the Select soft key or the
Call Status Tones
key. Selections are:
This feature allows you to activate an alert tone for available status
categories.
• Set by Network: you are identified to the other party using the
default network information.
1. Highlight one of the following options and press the Check
• Show Number: your identifying information displays to the other
party.
soft key to mark your selection.
• Hide Number: your identifying information is hidden from the other
party.
• Call Connect Tone: allows you to activate an alert tone that
sounds when connected.
• Minute Minder: allows you to activate an alert tone which plays at
one minute increments during an active call.
100
• Call End Tone: allows you to activate an alert tone that sounds
when a call is ended.
answer on your phone. You can also select the amount of time
that the phone delays before forwarding.
2. Press the Save soft key when finished.
• Unreachable: allows you to forward Voice Calls to a designated
number instead of your voicemail number when you are not in an
area covered by your service provider or when your phone is
switched off.
Alerts On Call
This feature allows you to activate an alert tone for new messages
being received during an active call.
• Cancel All: allows you to cancel all Call Forwarding features.
Press the Select soft key to activate this feature.
Highlight On or Off and press the Save soft key or the
key.
Note: If you want to change an option (example, from Forward Always to
Busy), deactivate the currently selected option and then activate the
new option.
Voice Call
This option allows you to configure those phone parameters
associated to voice calls.
2. Enter the Forward to number in the field or press the
key to select a number from the Address Book.
– or –
Call Forwarding
The Call Forwarding feature enables incoming calls to reroute to a
user-specified number.
Press the Options soft key, select Contacts, select a number
1. Highlight an option and press the Select soft key or the
key. Options include:
from Contacts and press Select
3. Press the Options soft key, select Activate or Check Status
and press the Select soft key or the key.
.
• Forward Always: allows you to forward Voice Calls.
• Busy: allows you to forward Voice Calls to a designated number
instead of your voice mail number if you are on another phone
call.
Note: When you select Check Status, the phone quickly checks the number
entered as the Forward To number to see if the number is working and
available. If the number is not working or unavailable, a message
displays.
• No Reply: allows you to forward Voice Calls to a designated
number instead of your voicemail number when there is no
Changing Your Settings
101
Call Restrictions
• Block All: blocks all outgoing calls.
3. Press the Save soft key.
This feature allows you to put restrictions on both incoming and
outgoing calls.
Reject List
Restricting Incoming calls:
The Reject List contains numbers that you do not want to accept
calls from. The incoming call is rejected and sent to your voice
mailbox. You can manually add numbers to be rejected to the
Reject List or mark incoming calls from the Recent Calls menu to
be added to the Reject List.
1. In Idle mode, press
Settings Calls Voice
Call Call Restrictions Incoming calls.
2. Select from one of the following options:
• Allow All: allows all incoming calls.
Manually adding a number to reject:
• Contacts Only: only allows calls from numbers in your Contacts
List.
1. In Idle mode, press
Settings Calls Voice
Call Reject List.
• Block Reject List: blocks all calls from numbers in your Reject
before any calls are actually rejected.
2. Press Options Create.
3. Enter the number you want to reject and press Save
.
• Block All: blocks all calls to your phone.
Rejecting a number from the Recent Calls screen:
3. Press the Save soft key.
1. In Idle mode, press
to display the Recent Calls
Restricting Outgoing calls:
screen.
1. In Idle mode, press
Settings Calls Voice
2. Highlight the number you want to add to the Reject List and
Call Call Restrictions Outgoing calls.
press Options Add to Reject List.
2. Select from one of the following options:
3. At the Add to Reject List? prompt, press Yes
.
• Allow All: allows all outgoing calls.
• Contacts Only: only allows calls to numbers in your Contact List.
102
For a call to be rejected, the Incoming call restriction must first be
• Off: the phone does not automatically redial the last number if the
call was disconnected or cut off.
2. Press the Save soft key to confirm your selection.
Call Waiting
Connectivity
This feature informs you when someone is trying to reach you
during another call.
The Connectivity option allows you to manage the settings
associated with the connection types available to your phone,
including: Bluetooth, Select USB Mode, Network Selection, and
Network Profiles.
1. Press the Options soft key and make a selection. Options
include:
In Idle mode, press
Settings Connectivity and
• Activate: allows you to activate this feature for all voice calls.
Press the Options soft key to select this option.
press the Select soft key or the
key. Select one of the
• Deactivate: allows you to deactivate this feature for all voice calls.
Press the Options soft key to select this option.
following options:
Bluetooth
• Check Status: allows you to check the status of this feature for all
voice calls. Press the Options soft key to select this option.
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30 feet
without requiring a physical connection.
2. Press the Select soft key to save your new selection.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within connectivity
range of one another, you can exchange information between
them, even if they are located in different rooms.
Auto Redial
This feature allows to you automatically redial the last number if
the call was cut off or you were unable to connect.
1. Press the
key to make your selection. Options
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility, and
set the security for the device.
include:
• On: causes the phone to automatically redial the last number if
the call was disconnected or cut off.
Changing Your Settings
103
Activation
can pose a security risk and permit unauthorized connection. This
feature should be paired with a Bluetooth security option.
The activation option allows you to use the Bluetooth features.
When the Bluetooth is activated, you can send or receive
information via Bluetooth. To save battery life or in situations
where Bluetooth use is prohibited, you can turn Bluetooth off.
1. In Idle mode, press
Settings Connectivity
key.
Bluetooth and press the Select soft key or the
2. If the second item in the Bluetooth menu is Discoverable:
To activate Bluetooth:
Off, then highlight the Discoverable: Off option and press the
1. In Idle mode, press
Settings Connectivity
Select soft key or the
key.
Bluetooth and press the Select soft key or the
The Visibility enabled confirmation prompt displays on your
key.
phone.
2. If the first item in the Bluetooth menu is Bluetooth: Off
,
3. If the second item in the Bluetooth menu is Discoverable:On
,
highlight the Bluetooth: Off option and press the Select soft
key or the key.
then Bluetooth is already discoverable.
My Devices
The Bluetooth activated confirmation prompt displays on
The My Devices option provides a list of Bluetooth wireless
technology devices discovered by your handset.
your phone.
3. If the first item in the Bluetooth menu is Bluetooth:On, then
1. In Idle mode, press
Bluetooth My Devices and press the Select soft key or
the key.
2. Highlight Search for New Device and press the Select soft
Settings Connectivity
Bluetooth is already activated.
Discoverable
The Discoverable option allows your phone to wirelessly transmit
its phone name and status. This can be useful if you are
attempting to connect additional Bluetooth devices. Phone visibility
key or the
– or –
key.
104
Highlight a device and press the Select soft key or the
1. In Idle mode, press
Settings Connectivity
key.
Bluetooth My Bluetooth Info and press the Select
soft key or the
2. Press the
key.
3. Enter the passkey (if applicable).
key to erase the previous Device Name.
If connecting to a Bluetooth wireless device, consult your
Bluetooth device user manual for your assigned PIN.
If connecting to another handset, enter the same
user-defined PIN on both handsets.
3. Repeat step 1 to set the Remote SIM Control
.
Note: The default input entry method is Abc, where the initial character is
Uppercase and each consecutive character in that same word is left as
lowercase text.
4. Highlight the Connection Options field and use the Left or
Right Navigation key to select Automatic (pairs
automatically), or Always Ask (asks before pairing) and
press the Pair soft key.
4. Press the Options soft key and select Save when you are
finished.
Note: The first time you try to pair with a handset, the same Passkey must be
entered on both. Once the handsets are paired, you do not need to use
the Passkey again.
5. If you are unable to pair with the device a popup displays on
the screen. Press the Yes soft key to retry.
My Bluetooth Info
My Bluetooth Info lets you view and change the Device Name,
view the Device Address and Hardware and Software Version, and
activate Remote SIM Control.
Changing Your Settings
105
Search for New Device
an active connection is established.
This option allows you to search for new Bluetooth devices.
2. In Idle mode, press
Settings Connectivity
1. In Idle mode, press
Settings Connectivity
Select USB Mode and press the Select soft key or the
key. Use the Up or Down Navigation key to highlight
one of these options:
Bluetooth Search for New Device and press the
Select soft key or the
key. The phone searches for
available devices.
•
Ask on Connection: requires the phone to present a “Select
USB Mode” pop-up which requires you to assign a default USB
application.
2. Highlight a device and press the Select soft key or the
key.
•
•
Media Player: sets the Media Player to launch as the default
application when a USB connection is detected.
3. Enter the passkey.
Samsung PC Studio: is set to launch PC Studio as the default
application when a USB connection is detected. Navigate to
www.samsung.com/us/support for a free download of PC
Studio.
4. Select a connection option and press the Pair soft key.
Selecting your Phone’s USB Mode
Your phone can connect to a PC via the USB cable (sold
separately). The phone can be configured to launch a default
application when the phone detects an active USB connection.
•
Mass Storage: sets the USB connection to a mass storage
device such as a zip drive.
3. Press the Save soft key or the
key.
Note: The Bluetooth feature must first be disabled before initiating a USB
connection with the phone. Prior to connecting the USB cable to the
phone, install the latest version of the PC Studio application. This
application installs the necessary USB drivers onto your machine. For a
1. Use the USB adapter cable to connect the handset to the
target PC. A USB icon (
) displays on the screen when
106
Configuring your Network Profiles
•
Auth Type: select the type of authentication used for this WAP
connection: None, Normal, or Secure.
Use this menu option to select and edit the profile for connecting
your phone to a network. Although you can change the active
connection, it is recommended that this only be done with
assistance from your service provider.
•
•
User ID: enter the User ID required to connect to the network.
Password: enter the user password required to connect to
the network.
•
•
Protocol: set the connection protocol used by the WAP browser:
WAP, HTTP, or Other.
Note: Network Profiles are pre-configured by your service provider and the
default profile is pre-set. If you change the settings without consulting
your service provider, the web browser and MMS features may not work
properly.
Home URL: enter the URL address of the page to use as
your homepage.
• Gateway Address: Enter the Gateway Address. This option only
appears when the Protocol is set to WAP.
1. In Idle mode, press
Settings Connectivity
Network Profiles and press the Select soft key or the
• Secure Connection: Select On or Off depending on whether or
not you have a secure connection. This option only appears when
the Protocol is set to WAP.
key.
2. Highlight one of the available options and press the View
•
•
Proxy Address: set the proxy server address and port.
soft key.
– or –
Linger Time (sec.): set a time period (in seconds) after which the
network is disconnected if there is no new data traffic.
Applications Settings
To create a new connection, press Options New, and
The Applications Settings feature allows you to configure the
functional parameters for most of the included applications. These
applications are described in more detail within other sections of
this manual.
press the Select soft key or the
key.
3. Select the parameter you want to edit:
•
•
Set Name: enter a profile name.
Access Name: edit the access point name.
1. In Idle mode, press
Settings and press the Select soft key or the
Changing Your Settings
Settings Applications
key.
107
2. Select the type of application to change and press the
3. Highlight each category you want to clear and press the
key to place a check mark beside the category. select
all available categories. Selecting All places a check mark
adjacent to every entry in the list. You can remove a check
mark by highlighting the selection and pressing the
key again.
Select soft key or the
key.
• Messages settings
• Browser Settings
• Camera Settings
• Music Player Settings
• Record Audio Settings
• Calendar Settings
4. Press the OK soft key.
5. Enter your password (if applicable) and at the Clear?
prompt, press the Yes soft key to confirm or the No soft key
to cancel. Depending on your phone’s security settings, you
may be asked to enter your password a second time.
• Contacts Settings
Memory Management
You can check used and available memory space for Shared
Memory, Messages, Media, Calendar, Tasks, Memo and Contacts.
You can also clear any of these spaces or delete all information
from your phone:
6. When you are finished, press the
key to return to Idle
mode.
Clearing Memory
1. In Idle mode, press
Checking the Used Space
1. In Idle mode, press
Settings Memory
Settings Memory
Management and press the Select soft key or the
Management and press the Select soft key or the
key.
key.
2. Highlight Clear Memory and press the Select soft key or
2. Highlight Used Space and press the Select soft key or the
the
key.
key.
108
3. Highlight a storage category and press the Select soft key
or the key.
4. To view the contents of a category, highlight an entry and
press the Select soft key or the key.
5. To delete entries in this category, highlight a specific entry
or select All and press the
key.
6. Press the Delete soft key.
7. At the Delete? confirm screen, press the Yes soft key to
continue, or the No soft key to cancel.
8. Press the
key to return to Idle mode.
Phone Information
This option allows you to see the phone number of the phone and
information about the phone that may be necessary if talking to
Customer Service in the event of a problem.
In Idle mode, press
Settings Phone Information
key. The phone
and press the Select soft key or the
information displays: My Number, Manufacturer, Model, Device
ID, Software Version, Language, and Client Version.
Changing Your Settings
109
Section 16: Health and Safety Information
Handle and dispose of batteries and chargers with care
Safety Warnings
Keep phone from children and pets
Use only Samsung-approved batteries and chargers specifically
designed for your phone. Incompatible batteries and chargers can
cause serious injuries or damage to your phone.
Keep your phone and all accessories out of the reach of small
children or animals. Small parts may cause choking or serious
injury if swallowed. Children could also damage the phone, dial
911 by mistake or make calls that increase your phone bill.
Never dispose of batteries or phones in a fire. Follow all local
regulations when disposing used batteries or phones.
Never place batteries or phones on or in heating devices, such as
microwave ovens, stoves, or radiators. Batteries may explode
when overheated.
Protect your hearing
Excessive exposure to sound at high volume can cause hearing
damage. Always turn the volume down before plugging in the
earphones and use only the minimum volume setting necessary to
hear your conversation or music.
Never crush or puncture the battery. Avoid exposing the battery to
high external pressure, which can lead to an internal short circuit
and overheating.
Install mobile devices and equipment with caution
Avoid interference with pacemakers
Ensure that any mobile devices or related equipment installed in
your vehicle are securely mounted. Avoid placing your phone and
accessories near or in an air bag deployment area. Improperly
installed wireless equipment can cause serious injury when air
bags inflate rapidly.
Maintain a minimum of 15 cm (6 inches) between mobile phones
and pacemakers to avoid potential interference, as recommended
by manufacturers and the independent research group, Wireless
Technology Research. If you have any reason to suspect that your
phone is interfering with a pacemaker or other medical device, turn
off the phone immediately and contact the manufacturer of the
pacemaker or medical device for guidance.
110
Turn off the phone in potentially explosive environments
Follow all safety warnings and regulations
Do not use your phone at refuelling points (service stations) or
near fuels or chemicals. Turn off your phone whenever directed by
warning signs or instructions. Your phone could cause explosions
or fire in and around fuel or chemical storage and transfer areas or
blasting areas. Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the phone, its
parts, or accessories.
Comply with any regulations that restrict the use of a mobile phone
in a certain area.
Use only Samsung-approved accessories
Using incompatible accessories may damage your phone or cause
injury.
Turn off the phone near medical equipment
Thunderstorms
Your phone can interfere with medical equipment in hospitals or
health care facilities. Follow all regulations, posted warnings, and
directions from medical personnel.
Do not use your phone during a thunderstorm. Your phone may
malfunction and your risk of electric shock is increased.
Turn off the phone or disable the wireless functions when
in an aircraft
Warning regarding display
The display on your handset is made of glass or acrylic and could
break if your handset is dropped or if it receives significant impact.
Do not use if screen is broken or cracked as this could cause injury
to you.
Your phone can cause interference with aircraft equipment. Follow
all airline regulations and turn off your phone or switch to a mode
that disables the wireless functions when directed by airline
personnel.
Safety Precautions
Drive safely at all times
Avoid interference with other electronic devices
Your phone emits radio frequency (RF) signals that may interfere
with unshielded or improperly shielded electronic equipment, such
as pacemakers, hearing aids, medical devices, and other
electronic devices in homes or vehicles. Consult the
Avoid using your phone while driving and obey all regulations that
restrict the use of mobile phones while driving. Use hands-free
accessories to increase your safety when possible.
Health and Safety Information
111
manufacturers of your electronic devices to solve any interference
problems you experience.
• Your phone may be damaged by exposure to magnetic fields. Do
not use carrying cases or accessories with magnetic closures or
allow your phone to come in contact with magnetic fields for
extended periods of time.
Protect batteries and chargers from damage
• Avoid exposing batteries to very cold or very hot temperatures
(below 0° C/32° F or above 45° C/113° F). Extreme
temperatures can reduce the charging capacity and life of your
batteries.
Reduce the risk of repetitive motion injuries
While using your phone, hold it with a relaxed grip, press the keys
lightly, use special features that reduce the number of keys you
have to press (such as templates and predictive text), and take
frequent breaks.
• Prevent batteries from contacting metal objects, as this can
create a connection between the + and - terminals of your
batteries and lead to temporary or permanent battery damage.
• Never use a damaged charger or battery.
Warranty Disclaimer: Proper use of a touch
screen handset
The touchscreen responds best to a light touch from the pad of
your finger. Using excessive force when pressing on the
touchscreen may damage the tempered glass surface and void
Handle your phone carefully and sensibly
• Do not disassemble your phone due to a risk of electric shock.
• Do not allow your phone to get wet—liquids can cause serious
damage and will change the colour of the label that indicates
water damage inside the phone. Do not handle your phone with
wet hands. Water damage to your phone can void your
manufacturer’s warranty.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
• Avoid using or storing your phone in dusty, dirty areas to prevent
damage to moving parts.
• Your phone is a complex electronic device—protect it from
impacts and rough handling to avoid serious damage.
• Do not paint your phone, as paint can clog moving parts and
prevent proper operation.
112
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY
LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE
PROPERTY DAMAGE.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it’s
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
Allow only qualified personnel to service your phone
Allowing unqualified personnel to service your phone may result in
damage to your phone and will void your warranty.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA,
USE AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER
UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A
VERTICAL OR HORIZONTAL OR FLOOR MOUNT POSITION.
Ensure maximum battery and charger life
• Avoid charging batteries for more than a week, as overcharging
may shorten battery life.
• Over time, unused batteries will discharge and must be
recharged before use.
Important usage information
Signal Strength
• Disconnect chargers from power sources when not in use.
• Use batteries only for their intended purpose.
Handle SIM cards and memory cards with care
The quality of each call you make or receive depends on the signal
strength in your area. Your phone informs you of the current signal
strength by displaying a number of bars next to the signal strength
icon. The more bars displayed, the stronger the signal. If you’re
inside a building, being near a window may give you better
reception.
• Do not remove a card while the phone is transferring or
accessing information, as this could result in loss of data and/or
damage to the card or phone.
• Protect cards from strong shocks, static electricity, and electrical
noise from other devices.
• Frequent writing and erasing will shorten the life span of memory
cards.
Health and Safety Information
113
• Do not touch gold-coloured contacts or terminals with your
fingers or metal objects. If dirty, wipe the card with a soft cloth.
To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them
through your local, free battery return system.
Ensure access to emergency services
This phone is compliant with RoHS.
Emergency calls from your phone may not be possible in some
areas or circumstances. Before travelling in remote or
undeveloped areas, plan an alternate method of contacting
emergency services personnel.
Radio frequency safety
The design of your phone complies with updated NCRP standards
described below. In 1991-92, the Institute of Electrical and
Electronics Engineers (IEEE) and the American National
Standards Institute (ANSI) joined in updating ANSI’s 1982
standard for safety levels with respect to human exposure to RF
signals. More than 120 scientists, engineers and physicians from
universities, government health agencies and industries
developed this updated standard after reviewing the available
body of research. In 1993, the Federal Communications
Commission (FCC) adopted this updated standard in a regulation.
In August 1996, the FCC adopted hybrid standard consisting of
the existing ANSI/IEEE standard and the guidelines published by
the National Council of Radiation Protection and Measurements
(NCRP).
Correct disposal of this product
The product and its electronic accessories (e.g., charger, headset,
USB cable) should not be disposed of with other household waste
at the end of their working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material
resources.
Correct disposal of batteries in this product
The batteries in this product should not be disposed of with other
household waste at the end of their working life.
Where marked, the chemical symbols Hg, Cd or Pb indicate that
the battery contains mercury, cadmium or lead above reference
levels. If batteries are not properly disposed of, these substances
can cause harm to human health or the environment.
114
Acknowledging special precautions and Industry Canada
notice
Specific Absorption Rates (SAR)
The SAR is a value that corresponds to the relative amount of RF
energy absorbed in the head of a user of a wireless handset.
This equipment has been tested and found to comply with the
limits of a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation; if this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
The SAR value of a phone is the result of an extensive testing,
measuring and calculation process. It does not represent how
much RF the phone emits. All phone models are tested at their
highest value in strict laboratory settings. But when in operation,
the SAR of a phone can be substantially less than the level
reported to the FCC. This is because of a variety of factors
including its proximity to a base station antenna, phone design and
other factors. What is important to remember is that each phone
meets strict federal guidelines. Variations in SARs do not
represent a variation in safety.
All phones must meet the federal standard, which incorporates a
substantial margin of safety. SAR values at or below the federal
standard of 1.6 W/kg are considered safe for use by the public.
• Reorient / relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
Maximum measured SAR values for the A847R are:
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
GSM 850
• Head: 0.33 W/Kg
• Body-worn: 1.38 W/Kg
Consult your dealer or an experienced radio/TV technician for
help.
GSM 1900
• Head: 0.52 W/Kg
• Body-worn: 0.48 W/Kg
Health and Safety Information
115
WCDMA 850
• Head: 0.61 W/Kg
• Body-worn: 0.66 W/Kg
WCDMA 1900
• Head: 1.1 W/Kg
• Body-worn: 0.63 W/Kg
116
Section 17: Warranty Information
What is Covered and For How Long?
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance, installation,
or adjustment; (f) installation, maintenance, and service of Product;
or (g) Product used or purchased outside Canada.
SAMSUNG Electronics Canada Inc. ("SAMSUNG") warrants to the
original purchaser ("Purchaser") that SAMSUNG's phones and
accessories ("Products") are free from defects in material and
workmanship under normal use and service for the period
commencing upon the date of purchase and continuing for the
following specified period of time after that date:
This Limited Warranty covers batteries only if battery capacity falls
below 80% of rated capacity or the battery leaks, and this Limited
Warranty does not cover any battery if: (i) the battery has been
charged by a battery charger not specified or approved by
SAMSUNG for charging the battery; (ii) any of the seals on the
battery are broken or show evidence of tampering; or (iii) the battery
has been used in equipment other than the SAMSUNG phone for
which it is specified.
Phone
1 Year
Batteries
Leather Case
Holster
1 Year
90 Days
90 Days
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component part
of Product. To obtain service under this Limited Warranty, Purchaser
must return Product to an authorized phone service facility in an
adequate container for shipping, accompanied by Purchaser's sales
receipt or comparable substitute proof of sale showing the date of
purchase, the serial number of Product and the sellers' name and
address. To obtain assistance on where to deliver the Product, call
Samsung Customer Care at 1-800-Samsung. Upon receipt,
SAMSUNG will promptly repair or replace the defective Product.
SAMSUNG may, at SAMSUNG's sole option, use rebuilt,
Other Phone Accessories 1 Year
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does not
cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna, or
cosmetic damage; (b) equipment that has the serial number
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
Warranty Information
117
reconditioned, or new parts or components when repairing any
Product or replace Product with a rebuilt, reconditioned or new
Product. Repaired/replaced leather cases, pouches and holsters will
be warranted for a period of ninety (90) days. All other repaired/
replaced Product will be warranted for a period equal to the
remainder of the original Limited Warranty on the original Product or
for 90 days, whichever is longer. All replaced parts, components,
boards and equipment shall become the property of SAMSUNG. If
SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and labor
charges for the repair or return of such Product.
•
•
COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL
SHALL BE CONSTRUED TO CREATE AN EXPRESS
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT. ALL IMPLIED WARRANTIES AND
CONDITIONS THAT MAY ARISE BY OPERATION OF LAW,
INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION
OF TIME AS THE EXPRESS WRITTEN WARRANTY STATED
HEREIN. SOME JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO
YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR
ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY
FROM THE USE OR LOSS OF USE OF THE PRODUCT OR
FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS
OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY
TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE)
OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS OR
EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR
FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY
What Are the Limits On SAMSUNG's Liability? EXCEPT AS SET
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN,
PURCHASER TAKES THE PRODUCT "AS IS," AND SAMSUNG
MAKES NO WARRANTY OR REPRESENTATION AND THERE
ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS
FITNESS FOR ANY PARTICULAR PURPOSE OR USE;
•
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF
THE PRODUCT;
•
THE WORKMANSHIP OF THE PRODUCT OR THE
COMPONENTS CONTAINED THEREIN; OR
118
OTHER PARTY. SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU.
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-
PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE
PURCHASER AND THE DIRECT VENDOR, OWNER OR
SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM
PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL
NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL
PURCHASER OF THIS PRODUCT AND SHALL BE
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF
THIS LIMITED WARRANTY IS HELD ILLEGAL OR
UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL
ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED
WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND
WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS
OR AS LIMITED AS THE LAW PERMITS.
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability contained
in this Limited Warranty. The agents, employees, distributors, and
dealers of SAMSUNG are not authorized to make modifications to
this Limited Warranty, or make additional warranties binding on
SAMSUNG. Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written, do not constitute
warranties by SAMSUNG and should not be relied upon.
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION
WITH THE PRODUCT. SAMSUNG MAKES NO WARRANTIES OR
REPRESENTATIONS AND THERE ARE NO CONDITIONS,
EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO
THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE
OR SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED
BY SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
Samsung Electronics Canada, Inc.
©2010 Samsung Electronics Canada, Inc. SAMSUNG is a
registered trademark of Samsung Electronics Co., Ltd. and its
related entities.
No reproduction in whole or in part allowed without prior written
approval.
Specifications and availability subject to change without notice.
Warranty Information
119
Index
Call Alert Type 90
Call Forwarding
Always 101
Cancel All 101
If Busy 101
Unreachable 101
Call Functions
3-Way Calling (Multi-Party Calling)
Contacts 19
Deleting Missed Call 22
Ending a Call 18
A
B
Accessing a Menu Function 16
Adding a New Contact
After a Call 34
Idle Screen 32
Back Light 11
Battery
Low Battery Indicator 5
Bluetooth 103
Activation 104
Discoverable mode 104
Bluetooth Device
Stereo 43
Alarms
Anniversary 75
Application Settings
Reset 98
Applications 69
Alarms 72
Business Card
C
Calendar 74
Calendar 74
Tasks 77
Anniversary 75
Appointment 74
Holiday 76
Important 76
Private 76
Viewing an Event 76
120
Missed Call Details 21
Muting Key Tones 25
Options During a Call 23
Putting a Call on Hold 23
Redialing Last Number 19
Send Message to Missed Call 21
Using the Speakerphone 25
Viewing All Calls 20
Viewing Missed Calls 21
Call Settings
Camcorder 86
Camcorder Options 86
Shooting Video 86
Camcorder Options
Effects 87
Settings 88
View Special Effects 83
Charging battery 5
Clear key 15
Connectivity
Bluetooth 103
Contacts
Shooting mode 87
Shortcuts 88
Auto Reply 100
Call Ringtone 90
Camera
Taking Pictures 82
Camera Options
Effects 83
Frame 83
Mosaic Shot 83
Panorama 83
Adding Pauses to Contact Numbers
Copying an entry to the Phone 38
Copying Entry to Phone 38
Entry Options 35
Ringtone Volume 90
Call Status Tones
Call Connect Tone 100
Call EndTone 101
Minute Minder 100
Call Waiting
Activate 103
Check Status 103
Deactivate 103
FDN (Fixed Dialing Number) Mode
Calls
Settings 84
General 100
Voice Call 101
Shooting mode 83
Shortcuts 84
Finding an Entry 35
121
Managing Entries 38
Own Phone Number 35
Settings 32
F
H
Headset jack/Adapter jack 11
I
Internet
Using Bookmarks 50
L
Language
Input Language 95
Screen Text 95
Light Settings
Backlight Time 94
Brightness 94
FDN
Creating New Numbers 36
Front Display
Wallpaper 93
Using 34
D
Dialing Display
Background Colour 93
Font Size 92
Display
Icons 12
E
End key 15
Entering Text
Using Alphabet Input Method 30
G
Getting Started
Activating Your Phone 1
Installing the microSD Card 3
SIM card information 1
Voicemail 6
Group
Adding an Entry 37
Creating New Group 36
Renaming a group 37
M
Main Display Settings
Dialing Display 92
Wallpaper 92
Memory Management
122
Menu Navigation 16
Menu Navigations
Playing Music Transferred from the
Handset 43
Music Player 42
Mute 25
Using Shortcut Numbers 17
Message Options
Options for Multimedia Messages 58
Options for SMS Messages 58
Message Settings
Message Alert Repetition 91
Message Alert Tone 91
Message Alert Type 90
Messages
Creating and Sending Multimedia
Messages 54
Creating and Sending Text
Messages 52
Retrieving a Multimedia Message 57
Retrieving a Text Message 57
Using Message Options 58
Multitasking 43
Playing Music while Using the Phone
Playlists 45
Transferring Music From the Digital
Music Stores 47
Transferring Music using Windows
Music File Extensions
3GP 42
AAC 42
AAC+ 42
eAAC+ 42
M4A 42
MP3 42
MP4 42
MPEG 42
WMA 42
My Menu 17
N
Phone Settings 91
O
Other Profiles
Outdoor Profile 92
Silent Profile 91
Own 96
Own Number 96
P
Phone
Language 95
Security 96
Shortcuts 96
Turning on/off 6
Music
Adding Music to your Handset 42
Playing Music Through a Stereo
Bluetooth Device 43
123
Phone Settings
Speakerphone Key 25
Specific Absorption Rates (SAR) 115
Settings
Applications Settings 107
Calls 100
Connectivity 103
Contacts 32
Display 92
Keypad Tone 91
Power On Type 91
Pictures 65
Subscriber Identity Module (SIM) 1
T
T9 Mode
Add a New Word 30
T-Coil Mode 13
Text Input Method
ABC (Alphabetic) Input Method (abc,
Changing 28
Numeric 28
Symbols 28
T9 mode 28
Time & Date
Date 94
Time 94
Time Format 94
Time Zone Updating 94
Tools
Playlists
Adding songs to a Playlist 45
Creating a Playlist 45
Importing a Playlist from Windows
Memory Management 108
Phone 95
Show My Number
SIM 1
Soft Keys 14
Sound Profiles
Normal 90
Other 91
R
S
SAR values 115
Security
Check PIN Code 96
Lock Phone 96
Calculator 78
124
Converter 79
Memo 78
Voice Recognition 70
Voicemail 60
Stopwatch 81
Timer 80
Tip Calculator 78
World Clock 79
Travel adapter 5
Accessing Voicemail from another
phone 60
W
U
Understanding Your Phone
Closed View of Your Phone 10
Features of Your Phone 8
Open View of Your Phone 8
Warranty Information 117
Using Bookmarks
Accessing a Website Using
Bookmarks 50
Adding Bookmarks 50
Deleting a Bookmark 51
Editing Bookmarks 51
V
Voice Call
Auto Redial 103
Call Waiting 103
125
|