Nokia Symbian S60 v5 Wi-Fi Browsing
User Guide
Smart Tips:
• If you want to use Wi-Fi for browsing:
o You have to setup both browser & streaming player for Wi-Fi
o Use Wi-Fi Wizard and click “Start Web Browsing”
o If you choose to use "Group access point", remember to set the Wi-Fi access
point with a higher priority than GPRS
• If moving out of a Wi-Fi coverage
o When you are using "Group access point" to connect to Wi-Fi and moving
out from Wi-Fi coverage, your handset may auto-switch from Wi-Fi to GPRS
connection
Setup for Wi-Fi browsing:
1. At idle page
2. Go to Settings
3. Choose “Connectivity”
1
Doc 9e_s60v5_v1.doc
10. Login to the “Netvigator
Hotspot” and enjoy internet
browsing
Setup for streaming player
1. Choose Main Menu >
Applications > RealPlayer.
2. Choose “Options”
3. Choose “Settings”
3
Doc 9e_s60v5_v1.doc
4. Choose “Streaming”
5. Choose “Network”
6. Choose “Netvigator" for
"Access point in use"
How to know if you are using Wi-Fi for data connection?
1. Wi-Fi icon is shown on top of
the screen.If double arrow is
shown under the 3G icon, press
“End” key to disconnect
2. To check the active connection, 3. Choose “Connectivity”
choose “Settings”
4
Doc 9e_s60v5_v1.doc
4. Choose “Connection mgr”
5. If you see both 3G and Wi-Fi
connection is on & you don’t want
to use 3G data, close the 3G data
account.
FAQ:
Q: Where can I find the WLAN wizard?
A: Please go to Main Menu > Settings > Connectivity > Wireless LAN
Q: Why PCCW CHANNELS streaming services cannot be played after connected to Wi-Fi?
A: Please go to RealPlayer and change the default access point to “PCCW 3G streaming”.
Q: Can the Wi-Fi settings apply to all applications in this handset?
A: No, it applies to the Browser & streaming player only.
Q: Why I cannot use Wi-Fi to visit PCCW mobile CHANNELS?
A: As PCCW CHANNELS require WAP setting with proxy, but Wi-Fi does not include such proxy, therefore
users need to set “PCCW 3G” as default profile if you want to visit PCCW CHANNELS
5
Doc 9e_s60v5_v1.doc
Q: What is “Group access point”?
A: “Group access point” is to group more than one access point into a same category, and the handset will
connect to the access points according to their priority. In case the access point with higher priority fails to
connect, then handset will retry with the next one. You can change the priority in “Use access point”
Q: Where can I find the “Group access point”?
A: You can go to “Menu > Tools > Settings > Connection > Destinations. Only Browser can use the group
access point feature at this moment
Q: Can I choose to confirm the access point every time? How do I know if my Wi-Fi setting is correct?
A: For each access point, you can select "After confirmation" in the option “Use access point". You will be
asked for confirmation whenever the handset connects to Wi-Fi.
6
Doc 9e_s60v5_v1.doc
|