MICRO COMP ONENT
S YS TEM
CD-R/RW P LAYBACK
MM-J 5
MM-J 5 S
Instruction Manual
MM-J5-RDS(GB) 9/15/04 19:17 Page 2
Thank you for buying this
S a fe t y Wa rn in g s
Co n t e n t s
SAMSUNG micro-component system.
Please take time to read these instructions.
They will allow you to operate your
system with ease and take full advantage
of its features.
GB
GB
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
This Compact Disc player is classified as a
CLASS 1 LASER product.
S
AFETY WARNINGS .................................................................................................................................................................................. 2
INS TALLING YOUR MICRO-COMP ONENT
S
YS TEM
Front Panel View ........................................................................................................................................................................................4
Remote Control ..........................................................................................................................................................................................5
Rear Panel View ........................................................................................................................................................................................6
Where to install your Micro-Component System........................................................................................................................................7
Connecting your System to the Power Supply ..........................................................................................................................................7
Inserting Remote Control Batteries ............................................................................................................................................................7
Connecting to an External Source ............................................................................................................................................................8
Speaker Connection ..................................................................................................................................................................................8
Connecting the AM (MW)/LW Aerial ..........................................................................................................................................................9
Connecting the FM Aerial ..........................................................................................................................................................................9
Setting the Clock ......................................................................................................................................................................................10
Use of controls adjustments or performance of
procedures other than those specified herein
may result in hazardous radiation exposure.
CAUTION
RISK OF ELECTRIC SHOCK.
CAUTION-INVISIBLE LASER RADIATION
WHEN OPEN AND INTER LOCKS
DEFEATED, AVOID EXPOSURE TO BEAM.
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOIS-
TURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE REAR COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CD-P LAYER
Listening to a Compact Disc ....................................................................................................................................................................10
Selecting a Track......................................................................................................................................................................................10
Searching for a Specific Music Passage on a CD ..................................................................................................................................10
CD Repeat Function ............................................................................................................................................................................11
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
Repeat A
Programming the Order of Playback ................................................................................................................................................11
......................................................................................................................................................11
B Function ....................................................................................................................................................................11
Regarding the playback of CD-R/RW
Checking or Changing Programmed Tracks ..........................................................................................................................................12
Function to skip through 10 tracks at a time ..........................................................................................................................................12
This symbol indicates that dangerous voltage which can cause electric shock is
present inside this unit.
TUNER
Searching for and Storing the Radio Stations..........................................................................................................................................12
Selecting a Stored Station........................................................................................................................................................................13
This symbol alerts you to important operating and maintenance instructions
accompanying the unit.
......................................................................................................................................................................13
Improving Radio Reception
..........................................................................................................................................................................14
About RDS broadcasting
................................................................................................................................................................14
About RDS DISPLAY Function
......................................................................................................................15
PTY(Program Type) indication and PTY-SEARCH function
Wiring the Mains Power Supply Plug(UK Only)
TAP E DECK
Listening to a Cassette ............................................................................................................................................................................16
Recording a Compact Disc ......................................................................................................................................................................16
Recording a Radio Program ....................................................................................................................................................................16
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face
of the plug and, if it requires replacing, a fuse approved to BS1362 of the same rating must be used.
OTHER FUNCTIONS
Timer Function ........................................................................................................................................................................................17
Cancelling the Timer ................................................................................................................................................................................17
Power Sound Function ........................................................................................................................................................................18
EQ/S.BASS (Super Bass) Function ..........................................................................................................................................................18
Sleep Timer............................................................................................................................................................................................19
MUTE Function......................................................................................................................................................................................19
Connecting Headphones ...................................................................................................................................................19
Never use the plug with the fuse cover omitted. If the cover is detachable. If a replacement fuse cover is required, it must be of the same
colour as the pin face of the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain
a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do NOT connect the plug to
a mains socket as there is a risk of shock hazard from the bared flexible cord.
RECOMMENDATIONS FOR USE
IMPORTANT
Safety Precautions......................................................................................................................................................................20
The wires in the mains lead are coloured in accordance with the following code:–
Cleaning your Micro-Component System...................................................................................................................................20
Precautions When Using Compact Discs ................................................................................................................................................21
Precautions When Using Audio Cassettes ..............................................................................................................................................21
BLUE = NEUTRAL
BROWN = LIVE
Before Contacting the After-Sales Service ..............................................................................................................................................21
Technical Specifications ..........................................................................................................................................................................22
Symbols
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:–
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured
BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
WARNING:
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E OR BY
THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.
P re s s
P u s h
Im p o rt a n t
No t e
2
3
MM-J5-RDS(GB) 9/15/04 19:17 Page 4
Fro n t P a n e l Vie w
Re m o t e Co n t ro l
GB
GB
1
25
24
13
MUTE
23
2
3
TIMER/CLOCK
TIMER ON/OFF
TUNER
BAND
22
PROGRAM/SET
EQ/S.BASS
DISPLAY
REP.
A
B
AUX
1
2
12
11
MO/ST
21
20
4
5
TAPE SPEED
SLEEP
RDS
PTY
POWER SOUND
19
18
6
7
CD
3
4
10
9
8
17
TUNING
VOLUME
TUNING
MODE
REPEAT
8
+10
5
6
16
15
9
10
TAPE
14
13
11
12
7
1. PROGRAM / SET
14. TAPE FAST-FORWARD
2. STANDBY/ON
3. TUNER/BAND
4. AUX
15. TUNING UP OR DOWN SEARCH
16. TUNING MODE / CD+10
17. CD PLAY/PAUSE
18. DISPLAY (RDS)
19. PTY(RDS)
1.
2.
3.
4.
5.
6.
STANDBY/ON
8
EQ / SUPER BASS
VOLUME CONTROL
POWER SOUND
.
5. SLEEP
RECORD/PAUSE
FUNCTIONS (TUNER/CD/TAPE)
AUX
9.
6. POWER SOUND
7. CD SKIP OR SEARCH
8. CD STOP
10.
11.
12.
13.
20. TAPE SPEED
REPEAT A
B
21. REPEAT A-B /FM MONO/STEREO
22. TIMER ON/OFF
23. MUTE
HEADPHONE JACK
TAPE SPEED
9. CD REPEAT
10. VOLUME CONTROL
11. TAPE REWIND
12. TAPE STOP
13. TAPE PLAY
SEARCH FUNCTION BUTTONS
TUNING MODE OR STOP BUTTON
PUSH OPEN (CD DOOR OPEN /CLOSE)
7.
PUSH EJECT
24. EQ/SUPER BASS
25. TIMER/CLOCK
(CASSETTE DOOR OPEN/CLOSE)
4
5
MM-J5-RDS(GB) 9/15/04 19:17 Page 6
Wh e re t o In s t a ll Yo u r
Mic ro -Co m p o n e n t S ys t e m
GB
In s e rt in g Re m o t e Co n t ro l Ba t t e rie s
Re a r P a n e l Vie w
GB
To t a k e fu ll a d va n t a g e o f yo u r n e w m ic ro -c o m p o n e n t s ys t e m , fo l-
lo w t h e s e in s t a lla t io n in s t ru c t io n s b e fo re c o n n e c t in g t h e u n it .
In s e rt o r re p la c e re m o t e c o n t ro l b a t t e rie s w h e n yo u :
Purchase the micro-component system
Find that the rem ote control is no longer operating correctly
Install the system on a flat, stable surface.
Never place this unit on carpeting.
When replacing the batteries, use a new set of batteries and
never m ix alkaline and m anganese batteries.
Never place this unit in an outdoor area.
Maintain an open space of approxim ately 6 inches (15 cm ) on the
sides and rear of the system , for ventilation purposes.
Place your thumb on the position marked
compartment cover (rear of the remote control) and push the cover in
the direction of the arrow.
on the battery
1
2
Make sure that you have enough room to open the com pact disc
com partm ent easily.
Place the loudspeakers at a reasonable distance on either side of
the system to ensure good stereo sound.
Insert two AAA, LR03 or equivalent batteries, taking care to respect
the polarities:
Direct the loudspeakers towards the listening area.
For optim um perform ance, m ake sure that both speakers are placed
at an equal distance above the floor.
+ on the battery against + in the battery compartment
1
2
– on the battery against – in the battery compartment
Replace the cover by sliding it back until it clicks into position.
3
If you will not be using the rem ote control for a long tim e,
rem ove the batteries to prevent corrosion.
3
4
Co n n e c t in g yo u r S ys t e m t o t h e
P o w e r S u p p ly
Th e m a in le a d m u s t b e p lu g g e d in t o a n a p p ro p ria t e s o c k e t .
Before plugging your system into a m ain socket, you m ust check
the voltage.
Plug the main lead into an appropriate socket.
1
Press the Standby/On button to switch your micro-component system on.
2
1. FM Aerial Connector Terminal
2. AM Aerial Connector Terminals
3. AUX-Input
4. Loudspeakers Connector Terminals
6
7
MM-J5-RDS(GB) 9/15/04 19:17 Page 8
Co n n e c t in g t h e AM (MW)/LW Ae ria l
Connecting to an External Source
S p e a k e r Co n n e c t io n
GB
GB
Th e AM a e ria l (fo r lo n g a n d m e d iu m w a ve s ) c a n b e :
Placed on a stable surface
Th e a u xilia ry in p u t c a n b e u s e d t o t a k e a d va n t a g e o f t h e
s o u n d q u a lit y o f yo u r m ic ro -c o m p o n e n t s ys t e m w h e n lis t e n in g
t o o t h e r s o u rc e s .
Th e lo u d s p e a k e r c o n n e c t o r t e rm in a ls a re lo c a t e d o n t h e re a r
o f t h e s ys t e m (re d a n d b la c k t a b s ).
Fixed to the wall (you m ust first rem ove the base)
Exam ples: A television
A video disc player
The AM aerial connector term inals are located on the rear of the system and are m arked AM .
There are four term inals on the system :
Two for the left speaker (m arked L)
To avoid noise interference, check that the loudspeaker wires do not run close to the
aerial wires.
Always keep them at least 2 inches (5 cm ) away.
A Hi-Fi stereo video cassette recorder
Two for the right speaker (m arked R)
To connect to the external source, the source m ust have an
audio output. In addition, you need an RCA connection cable.
To achieve the correct sound quality, connect the:
Red wire to the + term inals
Black wire to the - term inals
Set the system to standby mode and disconnect it and the external
source from the main socket.
1
Connect the audio cable to the rear of the micro-component system.
2
(Right Speaker)
(Left Speaker)
Connect the...
To the connector marked...
..............................................
Red jack
R (right)
L (left)
.............................................
White jack
For optimum sound quality, do not invert the right and left
channels.
Plug the system back into the main socket and press Standby/On
3
4
(
) to switch it on.
Select the AUX source by pressing AUX.
Result: AUX is displayed.
Switch the external source on.
5
6
Adjust the volume and balance as required:
Connecting the FM Aerial
Volume
Equaliser
Example: You can watch a film and take advantage of stereo sound
provided that the original sound track is in stereo (as if you
were in a cinema).
Ho w t o c o n n e c t a COAXIAL TYP E a e ria l.
Connect a 75Ω antenna to the FM antenna term inal.
6
Plug the connector on the FM aerial supplied into the coaxial socket (75Ω) m arked FM on the rear of the system .
Follow the instructions given on P a g e 1 2 to tune into a radio station, and determ ine the best position for the aerial.
If reception is poor, you m ay need to install an outdoor aerial.
To do so, connect an outdoor FM aerial to the FM socket on the rear of the system using a 75Ω coaxial cable (not supplied).
Dire c t io n s in In s t a llin g S p e a k e r
Installation in a place near heating apparatus, under direct lay of
light or with high humidity may cause performance degradation of
the speaker.
Do not install on the wall or on a high place of pole or other unsta-
ble place to prevent any safety accident caused by falling of the
speaker.
Do not take the speaker apart from TV or computer monitor.
The speaker near the TV or computer monitor may influence the
quality of the screen display.
3
4
8
9
MM-J5-RDS(GB) 9/15/04 19:18 Page 10
P ro g ra m m in g t h e Ord e r o f P la yb a c k
CD Re p e a t Fu n c t io n
S e t t in g t h e Clo c k
GB
Adjust the volume according to needs with the following procedures.
Press the VOLUME+,- button or turn the VOLUME + or knob .
6
7
GB
–
Yo u c a n re p e a t :
Yo u c a n d e c id e fo r yo u rs e lf:
o u r s ys t e m is e q u ip p e d w it h a c lo c k w h ic h a llo w s yo u t o t u rn
yo u r s ys t e m o n a n d o ff a u t o m a t ic a lly.
Yo u s h o u ld s e t t h e c lo c k :
If it is desired to pause while the playback is processing, press the
Th e o rd e r in w h ic h yo u lis t e n t o t h e t ra c k s
Th e t ra c k s t o w h ic h yo u d o n o t w is h t o lis t e n
A s p e c ific t ra c k o n
a
c o m p a c t d is c
CD(
) button.
All t ra c k s o n t h e c o m p a c t d is c
When you first purchase the m icro-com ponent system
After a power failure
After unplugging the unit
Press the CD(
) button once again to play back again.
This feature can be combined with the CD Repeat function.
To stop playback, press the Stop ( ) button.
8
Press the REPEAT button.
1
2
For each step, you have a few seconds to set the required
options. If you exceed this tim e, you m ust start again.
If necessary, stop the player by pressing Stop ( ).
1
2
To repeat the...
Press REPEAT...
Press PROGRAM / SET.
Switch the system on by pressing Standby/On (
)
Current track indefinitely..................... Once (REPEAT 1 is displayed)
Result:
is displayed.
1
2
Disc ....................................................Twice (REPEAT ALL is displayed)
Press TIMER /CLOCK twice.
Result: CLOCK is displayed.
Select the required track by pressing the SKIP buttons:
to move forwards through the tracks
3
When you wish to stop the Repeat function, press REPEAT a third time.
Result:REPEAT is no longer displayed and the function is cancelled.
to move backwards through the tracks
Press PROGRAM /SET.
3
4
Result: The hour flashes.
1,5,7
8
Press PROGRAM / SET.
4
5
6
6
To...
Press...
Result:
is displayed.
..............................................
Decrease the hours
To select other tracks, repeat Steps 3 and 4.
..............................................
Increase the hours
You can programme up to 24 tracks.
TUNING
VOLUME
When you have finished selecting the tracks, press CD (
listening to the selection, in the order in which the tracks were
programmed.
) to start
When the correct hour is displayed, press PROGRAM /SET.
Result: The minutes flash.
5
6
TUNING
MODE
REPEAT
+10
S e le c t in g a Tra c k
To...
Press...
Press Stop ( ) twice to cancel the selection when the disc is playing.
7
..........................................
...........................................
Decrease the minutes
Yo u c a n s e le c t t h e t ra c k yo u w is h t o lis t e n t o , e it h e r w h e n t h e
c o m p a c t d is c p la ye r is s t o p p e d o r w h e n a d is c is p la yin g .
TAPE
Increase the minutes
When the correct time is displayed, press PROGRAM /SET.
Result: The clock starts and is displayed, even when the system is in
standby mode.
To start playback at the beginning of the...
Press...
MUTE
7
.....................................................................
Next track
once
.................................................................
................................................................
......................................................
Current track
Previous track
once
twice
or
REP EAT A-B Fu n c t io n
TIMER/CLOCK
TIMER ON/OFF
TUNER
BAND
You can display the tim e, even when you are using another
function, by pressing TIMER /CLOCK once.
Track of your choice
the
PROGRAM/SET
.BASS
REP.
A
B
AUX
appropriate number of
times.
Wh e n yo u s e le c t CD(TAP E) REPEAT A
B p la yb a c k , t h e m u s ic
t im e s .
MO/ST
SLEEP
EQ/S.BASS
DISPLAY
TAPE SPEED
PTY
p a s s a g e s t o w h ic h yo u w e re lis t e n in g a re re p e a t e d
3
TAPE SPEED
SLEEP
POWER SOUND
RDS
2,4
MUTE
CD
Press CD(
Result:The CD(TAPE) player starts playing.
Press REPEAT A B button.
) or TAPE button.
DISPLAY
RDS
PTY
POWER SOUND
1
2
2
TUN
MEK
TIMER ON/OFF
CD
1
BAND
TUNING
VOLUME
AUX
PROGRAM/SET
REP.
A
B
CD
TUNING
MODE
MO/ST
REPEAT
SLEEP
EQ/S.
TAPSPEED
Result:The indications appear: START
The flashes appear: A
4,6
3,5,7
TUNING
POWER SOUND
DISPLA
RDS
PTY
VOLUME
3
3
6
A Time is memorised.
TUNING
TAPE
CD
4,6
1,7
Press REPEAT A
B button.
TUNING
MODE
3
4
REPEAT
Result:The indications appear: END
S e a rc h in g fo r a S p e c ific Mu s ic
P a s s a g e o n a CD
+10
B Time is memorised.
Your selected passages are repeated 3 times.
When you have finished the Repeat playback,
Press REPEAT A B.
Lis t e n in g t o a Co m p a c t Dis c
Wh e n lis t e n in g t o a c o m p a c t d is c , yo u c a n q u ic k ly s e a rc h fo r a
s p e c ific m u s ic p a s s a g e o n a t ra c k .
Do not use CDs of irregular shapes like heart or octagon shapes.
The perform ance of the player m ay be degraded.
Re g a rd in g t h e p la yb a c k o f CD-R/RW
To search through the tracks...
Press and hold down...
.........................................................
Press the CD(
)button on the main unit and select CD.
1
2
Forwards
for at least one second
In the case of an original CD-R(Recordable) recorded in
audio CD form at, CD-RW(Rewritable) and editing by the
user, playback is processed on the respective
com pleted status. (The player m ay not be played back
according to the characteristics of the CD or recorded
status.)
Open the CD door by pushing on the top of the main unit marked
PUSH OPEN ( ).
Result: The CD door is opened.
.........................................................
Backwards
for at least one second
2,3,4
It is recom m ended that you turn the volum e down before using
this function.
Place the CD on the compartment so that the CD label faces upward.
3
4
Close the CD door.
Result: Number of tracks and the total playback time are shown on
the display.
1
The CD-RW is com parably less reflexive than CD which
causes m ore tim e delay to read.
CD
1
Press the CD(
) button to playback.
5
TUNING
VOLUME
10
11
MM-J5-RDS(GB) 9/15/04 19:18 Page 12
Ch e c k in g a n d Ch a n g in g P ro g ra m m e d
Tra c k s
S e a rc h in g fo r a n d S t o rin g t h e Ra d io
S t a t io n s
S e a rc h in g fo r a n d S t o rin g t h e Ra d io
S t a t io n s (c o n t in u e d )
S e le c t in g a S t o re d S t a t io n
GB
GB
Yo u c a n s t o re u p t o :
15 FM stations
8 MW station
If you do not want to store the radio station found, revert to Step 4 and
Yo u c a n lis t e n t o
a
s t o re d ra d io s t a t io n a s fo llo w s :
Yo u c a n c h e c k a n d c h a n g e yo u r s e le c t io n o f t ra c k s a t a n y t im e .
8
search for another station.
Switch the system on by pressing Standby/On (
).
You must have selected at least one track.
Otherwise:
1
2
3
7 LW station
a Press PROGRAM/SET
Select the TUNER function by pressing TUNER/BAND on the front panel.
Select the required frequency band by pressing TUNER/BAND.
Select the radio station as follows.
Result: The program number is displayed for a few seconds.
Press Stop ( ) once if you have started listening to the selection.
1
2
b Press TUNING
and
to assign a program number between 1
Switch the system on by pressing Standby/On (
)
1
2
3
Press PROGRAM / SET.
4
and 15.
Select the TUNER function by pressing TUNER/BAND on the front panel.
Each time you press Program/Set, the next selection is displayed.
c Press PROGRAM/SET to store the radio station.
Result: The program number is no longer displayed and the station is
stored.
To listen to ...
Press ...
Select the required frequency band by pressing TUNER/BAND again.
Press PROGRAM / SET one or more times until the track to be changed
3
A stored station........................... a Press the TUNING MODE button
Result:The appropriate indication is displayed:
is displayed.
until “PRESET” is displayed.
FM
Frequency Modulation
Medium Wave
To store any other radio frequencies required, repeat Steps 3 to 6.
9
b
TUNING
and
to select the
AM(MW)
LW
required station.
Long Wave
The PROGRAM function can be used to assign a new station to
an existing program number.
Press
or
to select the new track.
4
5
6
To search for a station ...
Press Tuning Mode ...
4
5
Press PROGRAM / SET.
Press TUNING MODE again to exit the stored station selection
function.
Manually.......................................One or more times until MANUAL is
Press CD (
) to start listening to the selection.
Result: The first track selected is played.
displayed.
Automatically................................One or more times until AUTO is
displayed.
MUTE
TIMER/CLOCK
TIMER ON/OFF
TUNER
BAND
You can change one or more tracks in your initial selection.
1TUNER
TIMER/CLOCK
TIMER ON/OFF
Select the station to be stored by pressing
,
button on the front
8
BAND
PROGRAET
REP.
A
B
AUX
panel to decrease or increase the frequency respectively.
PROGRAM/SET
EQ/S.BASS
DISPLAY
REP.
A
B
UX
TIMER/CLOCK
TIMER ON/OFF
TUNER
BAND
MO/ST
2,3
To scroll through the frequencies faster when searching manually,
MO/ST
EQ/S.BASS
TAPE SPEED
SLEEP
hold down the
,
button on the front panel.
TAPE SPEED
SLEEP
2,
3
,
5
/SET
REP.
A
B
AUX
The automatic search procedure may stop on a frequency that does
not correspond to a radio station.
MO/ST
DISPLAY
RDS
PTY
POWER SOUND
RDS
PTY
POWER SOUND
EQ/S.BASS
TAPE SPEED
SLEEP
If this happens, use the manual search mode.
Adjust the volume by:
CD
DISPLAY
RDS
PTY
POWER SOUND
CD
6
7
Turning the VOLUME+,- knob on the front panel
or
1
CD
4
4
TUN
VOLUME
8
Pressing the VOLUME+,- button on the
remote control.
TUNING
VOLUME
TUNING
MODE
REPEAT
NING
MODE
6
Select the FM stereo or mono mode by pressing MO/ST on
the remote control.
REPEAT
4
TUNING
VOLUME
+10
8
+10
Fu n c t io n t o s k ip t h ro u g h 1 0
t ra c k s a t a t im e
4
TAPE
4
P re s s t h e +1 0 b u t t o n b rie fly w h ile p la yin g b a c k a
CD. Th e t ra c k 1 0 t ra c k s a ft e r t h e c u rre n t o n e w ill t h e n
b e p la ye d b a c k .
Im p ro vin g Ra d io Re c e p t io n
1
Exa m p le : If you want to select track 13 during playback of track
5, press the +1 0 button once, and then press the
button three tim es.
Yo u c a n im p ro ve t h e q u a lit y o f ra d io re c e p t io n b y:
Ro t a t in g t h e FM o r AM(MW) a e ria l
5
➝
1 0
➝
1 1
➝
1 2
➝
1 3
Te s t in g t h e p o s it io n s o f t h e FM a n d AM(MW) a e ria ls
b e fo re fixin g t h e m p e rm a n e n t ly
2,3
6
+10
If reception from a specific FM radio station is poor, press MO/ST
to switch from stereo mode to mono. The quality of the sound will
be improved.
5
4
5
BAND
AUX
CD
MUTE
PROGRAM/SET
EQ/S.BASS
DISPLAY
P.
A
B
7
MO/ST
TAPE SPEED
SLEEP
TUNING
VOLUME
TIMER/CLOCK
TIMER ON/OFF
TUNER
BAND
RDS
PTY
POWER SOUND
TUNING
MODE
REPEAT
PROGRAM/SET
EQ/S.BASS
REP.
A
B
AUX
+10
MO/ST
TAPE SPEED
SLEEP
13
12
MM-J5-RDS(GB) 9/15/04 19:18 Page 14
PTY(Program Type) indication and
PTY-SEARCH function
About RDS broadcasting
About RDS DISPLAY function
GB
GB
About PTY-SEARCH
Searches the same PTY as the program type of broadcasting
u The PTY information is composed of an identification symbol, which
helps the FM radio to recognize the program type of each FM station.
This unit has the RDS (Radio Data System) function, which enables
for the various information such as broadcasting station, radio text,
time and 30 types of programs (News, Rock, Classic, etc.) to be
received from the FM RDS station together with normal radio
signal.
About "PS NAME" MODE
u The below 30 PTY information is shown on the display by pressing the
Pty button.
station.
Displays the name of broadcasting station.
Receive the FM radio.
See the radio receiving method on the page 12~13.
1
2
Press the RDS DISPLAY button to select the PS NAME.
"PS NAME" appears on the display.
If the PS information is being received, the PS name (BBC, AFO, NDR,
etc.) is shown on the display.
Display
Program Type
Press the Standby/On (
) button.
1
2
The FM and frequency appear on the display.
If the received station is transmitting the RDS information, “RDS”
lights up.
• News including an announced opinion and report
Receive the FM radio.
NEWS
See the radio receiving method on the page 12~13.
If the PS information isn't received, the original FM frequency is shown.
• Several matters including a current incident, documentary,
discussion and analysis.
FM and frequency are shown on the display
AFFAIRS
INFO
Press the PTY button.
The PTY MODE(NEWS, AFFAIRS, etc.) appears on the display.
If the received station transfers the RDS information, 'RDS'
appears automatically on the display.
• Information including weights and measures, returns and fore-
cast, matters interesting the customer, medical information, etc.
Even though no RDS DISPLAY button is pressed, the reception
or
Press the TUNING
MODE.
button to select the desired PTY
Press the RDS DISPLAY button to select the desired RDS
mode.
of PS information ensues the PS name is displayed.
3
• Sports
SPORT
Whenever the button is pressed, RDS mode changes as fol-
lows.
EQ/S.BASS
DISPLAY
TAPE SPEED
PTY
SLEEP
• Education
EDUCATE
DRAMA
If the station is transmitting no PTY information, 'NO PTY' lights
on the display.
PS NAME
RT
CT
Current FM frequency
• Drama-Radio serial, etc.
RDS
POWER SOUND
• Culture-National or local culture including the religious problem,
social science, language, theatre,etc.
When the PTY MODE is selected(The PTY MODE is shown on
the display), press the PTY KEY once again to convert into
PTY-SEARCH MODE and auto-search the station sequentially.
If the PTY MODE received in the course of auto-search agrees
with the selected PTY MODE, the auto-search stops and the
PTY-SEARCH is finished.
CULTURE
The RDS function is available only in FM broadcasting.
• Natural science and technology
SCIENCE
VARIED
Description on RDS function
• Others-Speech, amusing program (quiz, game), interview,
comedy and satirical play, etc.
About 'RT' MODE
1. PTY(Program Type) : Displays the type of programme
Displays the character transmitted from the broadcasting station.
POP M
• Pop music
currently being broadcast
ROCK M
M.O.R.M
• Rock music
2. PS NAME(Program Service Name) : Indicates the name
Press the RDS DISPLAY button to select the RT MODE.
"RT" appears on the display.
If the PTY MODE which agrees with the PTY MODE selected in
the course of auto-search, isn't received, it is returned to the first
frequency at beginning the PTY SEARCH and the auto-search
and PTY SEARCH are suspended.
of broadcasting station and is composed of 7 characters.
• M.O.R- Comfortable music, occasionally vocal or piece
If the RT information is being received, the received information is
shown on the display.
If the RT information isn't received, the "NO RT" is shown on the
display.
3. RT(Radio Text) : Decodes the text broadcast by a station
• Light classical music- Classical music and instrumental
and chorus music
LIGHT M
CLASSIC
(if any) and is composed of maximum 64 characters.
4. CT(Clock Time) : Decodes the real time clock from the
• Heavy classical music-Orchestra music, symphony, chamber
music and opera
FM frequency.
MO/ST
Some stations may not transmit PTY, RT or CT
information therefore this may not be displayed in all
cases.
EQ/S.BASS
DISPLAY
TAPE SPEED
SLEEP
• Other music - Jazz, R&B country music
• Weather
OTHER M
WEATHER
FINANCE
CHILDRE
RDS
PTY
POWER SOUND
• Finance
5. TA(Traffic Announcement) : When this symbol flashes it
shows that the traffic announcement is in progress.
• Children’s programmes
• Social affairs
• Religion
SOCIAL
RELIGIO
About CT(Clock Time)
Sets the time of RDS clock.
• Phone in
PHONE I
TRAVEL
LEISURE
2
1
To select the CT time, set the RDS DISPLAY button to CT MODE.
• Travel
2
• Leisure
The CT information will take up to 2 minutes to be decoded
therefore the clock isn’t displayed immediately.
• Jazz Music
JAZZ
EQ/S.BASS
DISPLAY
TAPE SPEED
PTY
SLEEP
• Country Music
• National Music
• Oldies Music
• Folk Music
If there is no received CT information, "NO CT" is displayed.
COUNTRY
NATION
OLDIES
FOLK M
DOCUMEN
TEST
RDS
POWER SOUND
PROGRAM/SET
EQ/S.BASS
DISPLAY
REP.
A
B
AUX
SLEEP
MO/ST
2
TAPE SPEED
CD
RDS
PTY
POWER SOUND
• Documentary
• Alarm Test
14
15
MM-J5-RDS(GB) 9/15/04 19:18 Page 16
Lis t e n in g t o a Ca s s e t t e
Tim e r Fu n c t io n
GB
1
Th e t im e r e n a b le s yo u t o s w it c h t h e s ys t e m o n o r o ff a t s p e c ific t im e s .
Exa m p le : Yo u w is h t o w a k e u p t o m u s ic e ve ry m o rn in g .
Switch the system on by pressing Standby/On (
) .
1
2
3
GB
Select the TAPE function by pressing TAPE on the front panel.
MUTE
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Open the cassette deck by pushing on the corner of the cover marked
PUSH EJECT until you hear a click and then release it.
5
4
Before setting the timer, check that the current time is correct.
Insert the pre-recorded cassette with the open edge of the tape facing
downwards.
4
TU1,9
BAND
TIMER/CLO
TIMER ON/OFF
2
For each step, you have a few seconds to set the required
options. If you exceed this time,you must start again.
4
Close the deck by pushing on it until it clicks into place.
5
6
PROGRAM/SET
REP.
A
B
AUX
Press the TAPE( ) button.
MO/ST
4
Result: The cassette starts playing.
BASS
TAPE SPEED
SL3,4,5,6,7,8
Switch the system on by pressing Standby/On (
).
1
2
3
6
Press TAPE SPEED to adjust the speed of the tape playing.And
each time the button is pressed,the mode changes as follows.
7
DISPLAY
RDS
PTY
POWER SOUND
Press Timer/Clock until
TIMER is displayed.
-10%SPEED
+10%SPEED
NORMAL
Press PROGRAM/SET.
Result:ON TIME is displayed for a few seconds, followed by any switch-
CD
on time already set; you can set the timer switch-on time.
Re c o rd in g a Ra d io P ro g ra m
When the cassette is stopped, select one of the following functions as
required.
8
Set the timer switch-on time.
4
ING
VO
4,5,6,7
a Set the hour by pressing
and
.
TUNING
MODE
b Press PROGRAM/SET.
To...
Press...
Yo u c a n re c o rd a ra d io p ro g ra m o f yo u r c h o ic e .
REPEAT
You do not need to adjust the volum e, as it has no effect on
the recording.
Rewind the cassette...................
Fast-forward the cassette...........
/
/
4,5,6,7
Result: The minutes flash.
c Set the minutes by pressing
d Press PROGRAM/SET.
and
.
The cassette player stops automatically when the beginning or end of
the cassette is reached.
TAPE
Result: OFF TIME is displayed for a few seconds, followed by any
switch-off time already set; you can now set the timer switch-off
time.
Switch the system on by pressing Standby/On (
) .
1
2
3
4
To stop the playback or search, press STOP (
)
button.
9
Insert a blank cassette in Deck.
Set the timer switch-off time.
Select the TUNER function by pressing TUNER/BAND.
5
a Set the hour by pressing
b Press PROGRAM/SET.
Result: The minutes flash.
c Set the minutes by pressing
d Press PROGRAM/SET.
and
.
Select the radio station that you wish to record by pressing
7
1
or
control
button on the front panel or
/
on the remote
.
and
.
Press REC/PAUSE.
Result: REC is displayed and recording starts.
Ca n c e llin g t h e Tim e r
5
6
Result: VOL 10 is displayed, where 10 corresponds to the volume already
set.
Press
PROGRAM/SET.
Result:The source to be selected is displayed.
To stop recording, press STOP ( )button.
Aft e r h a vin g s e t t h e t im e r, it w ill s t a rt a u t o m a t ic a lly a s s h o w n b y
t h e t im e r in d ic a t io n o n t h e d is p la y. If yo u n o lo n g e r w is h t o u s e
t h e t im e r, yo u m u s t c a n c e l it .
and
to adjust the volume level and press
6
7
2,6
You can stop the timer at any time (system on or in standby mode).
9
Press
and
to select the source to be played when the system
8
8
switches on.
3,5
To...
Press TIMER ON/OFF...
If you select...
You must also...
1
........................
..........................
TAPE (cassette)
TUNER (radio)
•
Insert a recorded cassette in the deck.
Select the FM or AM (MW/LW) frequency
Cancel the timer........................... Once.
Result:
•
is no longer displayed.
is displayed again.
Re c o rd in g a Co m p a c t Dis c
band by pressing
Press PROGRAM/SET.
Select a preset station by pressing
and
and
.
•
•
Restart the timer.......................... Twice.
Result:
5
Dire c t re c o rd in g
MUTE
Th e d ire c t re c o rd in g m o d e e n a b le s yo u t o s t a rt re c o rd in g w it h
a n y t ra c k o n t h e c o m p a c t d is c .
.......................
CD (compact disc)
Load a compact disc.
Press PROGRAM/SET to confirm the timer.
8
9
You do not need to adjust the volum e, as it has no effect on the recording.
3
TIMER/CLOCK
TIMER ON/OFF
TUNER
BAND
Press Standby/On to set the system to standby mode.
Switch your system on by pressing Standby/On (
Insert a blank cassette in Deck.
Load a compact disc.
) .
1
2
3
4
4
Result:
is displayed on the top right of the time, indicating that the timer has
been set. The system will switch on and off automatically at the required
times.
PROGRAM/SET
EQ/S.BASS
DISPLAY
REP.
A
B
AUX
4
6
MO/ST
TAPE SPEED
SLEEP
Press the CD(
Use the CD selection (
) button.
,
) buttons to select the desired song.
RDS
PTY
POWER SOUND
If the timer switch on and off times are identical, the word ERROR
5
6
Press the REC/PAUSE button.
Result: Recording will begin.
is displayed.
You can use
button on the front panel instead of
/
To stop recording, press STOP ( )button.
/
button on the remote control in step 4,5,6,7.
16
17
MM-J5-RDS(GB) 9/15/04 19:18 Page 18
Sleep Tim er
Connecting Headphones
EQ /S.BASS (Super Bass) Function
Pow er sound function
You can connect a set of headphones to your m icro
com ponent system so that you can listen to m usic or radio
program s w ithout disturbing other people in the room .
The headphones m ust have a 3.5 m m connector or
appropriate adaptor.
GB
Yo u c a n s e t t h e s ys t e m t o s w it c h o ff a u t o m a t ic a lly.
Exa m p le : Yo u w is h t o fa ll a s le e p t o m u s ic .
GB
Yo u r Mic ro Co m p o n e n t s ys t e m h a s
a
b a s s a m p lific a t io n fu n c t io n
This m achine is equipped w ith the function of POWER SOUND,
w hich am plifies bass treble output to tw ice as m uch for pow erful
surround-sound.
a n d e q u ip p e d w it h a p re s e t e q u a lis e r t h a t a llo w s yo u t o
c h o o s e t h e m o s t a p p ro p ria t e b a la n c e b e t w e e n t re b le a n d b a s s
fre q u e n c ie s , a c c o rd in g t o t h e t yp e o f m u s ic yo u a re lis t e n in g
t o .Th a t is c a lle d EQ/S .BAS S .
Press SLEEP on the remote control.
Result: The following indications are displayed:
1
Press the POWER SOUND button on the front panel.
1
Th is fu n c t io n m a k e s t h e s o u n d m o re p o w e rfu l a n d re a l.
Connect the headphones to the Phones connector on the rear panel
(or top right corner).
Result:
P.SOUND is displayed for a few seconds.
A more powerful resonant sound is diffused.
Press SLEEP one or more times to indicate how long the system should
continue playing before it switches off:
2
Press EQ/S. BASS on the front panel or EQ/S. BASS on the remote
control until the required option is selected.
To cancel this function, press POWER SOUND again.
Result: OFF is displayed for a few seconds.
2
Result: The loudspeakers are no longer used for sound output.
90 MIN
OFF
60 MIN
15 MIN
45 MIN
30 MIN
Prolonged use of headphones at a high volume may damage your
hearing.
To obtain a...
Select...
Normal balance (linear)............................................PASS
Balance suitable for pop music............................POP
Balance suitable for rock music ..........................ROCK
Balance suitable for classic music.......................CLASSIC
Balance suitable for s-bass music.......................S-BASS
At any time, you can:
Check the remaining time by pressing SLEEP
Change the remaining time by repeating Steps 1 and 2
To cancel the sleep timer function, press SLEEP one or more times until
OFF is displayed and the word SLEEP disappears.
3
TIMER/CLOCK
TIMER ON/OFF
TUNER
BAND
PROGRAM/SET
EQ/S.BASS
LAY
REP.
A
B
AUX
MO/ST
TAPE SPEED
SLEEP
RDS
PTY
POWER S
1,2,3
CD
MUTE
MUTE Function
TIMER/CLOCK
TIMER ON/OFF
TUNER
BAND
Yo u c a n t u rn t h e s o u n d o ff t e m p o ra rily.
Exa m p le : You wish to answer a telephone call.
PROGRAM/SET
EQ/S.BASS
DISPLAY
REP.
A
B
AUX
MO/ST
Press MUTE.
TAPE SPEED
SLEEP
1
RDS
PTY
POWER SOUND
To switch the sound back on (at the same volume as before), press
2
MUTE again, or press the VOLUME+, -button.
CD
MUTE
TIMER/CLOCK
TIMER ON/OFF
TUNER
BAND
PROGRAM/SET
EQ/S.BASS
DISPLAY
REP.
A
B
AUX
MO/ST
TAPE SPEED
SLEEP
RDS
PTY
POWER SOUND
19
18
MM-J5-RDS(GB) 9/15/04 19:18 Page 20
P re c a u t io n s Wh e n Us in g Co m p a c t
Dis c s
Cle a n in g Yo u r
Mic ro -Co m p o n e n t S ys t e m
Be fo re Co n t a c t in g t h e Aft e r-S a le s
S e rvic e
S a fe t y P re c a u t io n s
GB
GB
Th e fo llo w in g d ia g ra m s illu s t ra t e t h e p re c a u t io n s t o b e t a k e n
w h e n u s in g o r m o vin g yo u r m ic ro -c o m p o n e n t s ys t e m .
To o b t a in t h e b e s t p o s s ib le re s u lt s fro m yo u r
m ic ro -c o m p o n e n t s ys t e m , yo u m u s t c le a n t h e fo llo w in g
e le m e n t s re g u la rly:
Handle your com pact discs with care. Always hold them by the
edges to avoid leaving fingerprints on the shiny surface.
It always takes a little time to become familiar with a new appliance.
If you have any of the problems listed below, try the solutions given.
They may save you the time and inconvenience of an unnecessary
service call.
When you have finished playing a com pact disc, always put it back
in its case.
The outer casing
The com pact disc player
Do not fix paper or adhesive tape to the discs and do not write on
the label.
The cassette players (heads, rollers and drive capstans)
Clean them with a special-purpose cloth.
Always unplug the system from the wall outlet:
Before cleaning it
Problem
Checks/Explanation
Store your com pact discs in a clean place, out of direct sunlight,
where they will not be exposed to high tem peratures.
The system does not work
• The main lead is not correctly plugged into
a wall socket or the wall socket is not
switched on.
If you are not going to be using it for a long tim e
COMPACT
Always use com pact discs m arked
.
DIGITAL AUDIO
Outer Casing
• The remote control batteries need replacing
or the polarity has not been respected.
• The STANDBY/ON button has not been
pressed.
Clean the outer casing regularly using a soft cloth and a light detergent. Do
not use abrasive powders, liquids or aerosol cleaners. Never let any liquids
get into the system.
Ambient operating conditions:
Do not expose the unit to direct sun
radiation or other heat sources.
This could lead to overheating and
malfunction of the unit.
G
E
N
E
R
A
L
There is no sound
• The volume has been completely turned
down.
Ambient temperature
Humidity
5°C-35°C
10-75%
Compact Disc Player
• The correct function (TUNER, CD, TAPE,
AUX) has not been selected.
• You have connected a set of earphones.
• The loudspeaker wires have been
disconnected.
Before playing a compact disc, clean it with a special CD cleaning
1
agent. Do not use the same cleaning agents as for vinyl LP records.
Carefully wipe the disc from the centre outward.
• The MUTE button has been pressed.
Regularly clean the player with a special cleaning disc (available from
your local dealer).
2
The Timer does not work
• The timer has been stopped by pressing
TIMER ON/OFF.
P re c a u t io n s Wh e n Us in g Au d io
Ca s s e t t e s
Tape Decks
In case it does not work, even the • Press the POWER SOUND button for 5
action is taken as above.
seconds in power ‘OFF’(standby), then it is
returned the original position (RESET)
Press PUSH EJECT(
) to open the cassette deck.
1
2
Check that the tape in the cassette is sufficiently taut.
Use a cotton bud and a special cassette cleaning agent to clean the:
To prevent erasing a cassette that you wish to keep, rem ove the
safety tab on the upper edge of the cassette. To record a cassette,
where the tab has been broken, sim ply cover the opening with
adhesive tape.
• The CD function has not been selected.
• The disc has been inserted face down or is
either dirty or scratched.
Head (1)
Do not place potted plants or vases
on top of the unit. Moisture entering
the unit could lead to dangerous
electric shock and can cause
equipment damage. In such events
immediately disconnect the main
plug from the socket.
During thunderstorms, disconnect
the main plug from the socket.
Main voltage peaks due to light-
ning could damage the unit.
Rollers (2)
The compact disc player does not • The laser sensor is dirty or dusty.
Drive capstans (3)
start playing
• The system has not been installed on a flat,
horizontal surface.
• Condensation has formed in the player;
leave the system in a warm, airy room for at
least one hour.
C
D
When you have finished playing a cassette, always put it back in its
case.
3
Store your cassettes in a clean place, out of direct sunlight, where
they will not be exposed to high tem peratures.
Avoid using 120-m inute cassettes as they place unnecessary strain
on the tape m echanism .
C
A
S
S
E
T
T
E
S
• The TAPE function has not been selected.
The tape does not start playing
•
The cassette has not been inserted correctly.
• The cassette player has not been closed.
• The tape is either slack or broken.
VOLUME
UP
The volume falls off
The cassette is not erased correctly
There is excessive wow and flutter
• The audio heads are dirty.
• The rollers or drive capstans are dirty.
• The tape is worn.
1
2
DOWN
• The TUNER function has not been selected.
• The radio frequency has not been correctly
selected.
• The aerial has been disconnected or is not
facing the right way. Turn it until you find the
best orientation.
R
A
D
I
Reception is poor or no radio
stations are received at all
If you will not be using the rem ote control for a long tim e,
rem ove the batteries to prevent corrosion.
Remove the batteries from the
remote control, if not used for any
extended period.
Leaking batteries can cause serious
damage to the remote control.
When using headphones, take care
not to listen at excessive volumes.
Extended use of headphones at
high volumes will lead to hearing
damage.
• You are in a building that blocks radio
waves; you must use an outside aerial.
Although your system is very hard-wearing, it should not be
used in an excessively dusty environm ent or subjected to
shocks or extrem e heat (close to heating appliances or in
direct sunlight, etc.).
O
If the unit em its an unpleasant odour when in use, unplug it
from the m ain supply and contact the after-sales service.
If the above guidelines do not allow you to solve the problem , take a
note of:
The m odel and serial num bers, norm ally printed on the rear of
the system
Your warranty details
A clear description of the problem
Then contact your local dealer or SAMSUNG after-sales service.
Do not place heavy items on the
main lead. Main cable damage can
lead to damage of the equipment (fire
hazard) and can cause electric
shock.
Do not remove any equipment panels.
The inside of the unit
contains live components, which
cause electric shock.
20
21
MM-J5-RDS(GB) 9/15/04 19:18 Page 22
Te c h n ic a l S p e c ific a t io n s
GB
S AMS UNG s t rive s t o im p ro ve it s p ro d u c t s a t a ll t im e s . Bo t h t h e d e s ig n s p e c ific a t io n s a n d t h e s e u s e r
in s t ru c t io n s a re t h u s s u b je c t t o c h a n g e w it h o u t n o t ic e .
RADIO
LW
THIS APPLIANCE IS MANUFACTURED BY:
Usable sensitivity
AM (MW)
60 dB
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
FM
40 dB
56 dB
2 %
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
54 dB
16 dB
0.5 %
COMPACT DIS C P LAYER
Frequency range
Signal/noise ratio
Distortion
20 Hz - 20 KHz
80 dB (at 1 KHz) with filter
0.1 % (at 1 KHz)
Channel separation
Disc sizes
75 dB
Diameter: 120 or 80 mm. Thickness: 1.2 mm
TAP E DECK
Frequency range
Signal/noise ratio
Channel separation
Erasing effect
125 Hz ~ 8 KHz
40 dB
30 dB
50 dB
AMP LIFIER
Output power (6 Ω)
Channel separation
Signal/noise ratio
2 X 10 Watts RMS (total harmonic distortion : 10%)
40 dB
70 dB
GENERAL
Dimensions
145(W) x 226 (H) x 282(D) mm
AH68-01405B
22
|