SGH-T139
P O R T A B L E
D U A L - B A N D
M O B I L E
P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S.
Pat. 6,011,554 and other patents pending.
®
ACCESS and NetFront™ are trademarks or registered trademarks of ACCESS Co., Ltd. in Japan and other
countries.
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B
Design”) are registered trademarks and are wholly owned by the Bluetooth SIG.
microSD™ and the microSD logo are Trademarks of the SD Card Association.
®
Openwave is a registered Trademark of Openwave, Inc.
Open Source Software
Some software components of this product incorporate source code covered under GNU General Public License
(GPL), GNU Lesser General Public License (LGPL), OpenSSL License, BSD License and other open source licenses.
To obtain the source code covered under the open source licenses, please visit:
.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE
PRODUCT, THE PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED
IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY
KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY
DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE
BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR LOSS
OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
Section 1: Getting Started ........................................................................... 4
Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Switching the Phone On or Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Setting Up Your Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Display Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Missed Messages Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
My Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Section 3: Call Functions ........................................................................... 17
Adjusting the Call Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Selecting Functions and Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Section 4: Menu Navigation ...................................................................... 26
Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Section 5: Entering Text ............................................................................ 28
Changing the Text Input Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Using ABC Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Using Number Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Using Symbol Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Storing a Number in the Phone’s Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Storing a Number in the SIM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
1
Dialing a Number from Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Creating and Editing a Caller Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Dialing a Number from the SIM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Deleting all of the Phonebook Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Block list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Own Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
FDN List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Section 7: Messages ..................................................................................43
Types of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Text Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Picture Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Audio Postcard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Instant Messaging (IM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Sentbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Drafts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
myFaves Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Memory Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Call settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Self-help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Section 9: Fun & Apps ...............................................................................71
Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
2
Section 10: Camera ................................................................................... 85
Using the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
My Album . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
web2go . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Health and Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Warning Regarding Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
Using Your Phone Near Other Electronic Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Other Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Product Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Availability of Various Features/Ring Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Battery Standby and Talk Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Battery Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
End User License Agreement for Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
3
Section 1: Getting Started
This section explains how to start using your phone by first configuring your hardware, activating your service, and
then setting up your voice mail.
Activating Your Phone
When you subscribe to a cellular network, you are provided with a plug-in SIM card loaded with your subscription
details, such as your PIN, available optional services, and many others features.
Installing the SIM Card
Important!: The plug-in SIM card and its contacts information can be easily damaged by scratching or bending, so be careful when
handling, inserting, or removing the card.
Keep all SIM cards out of reach of small children.
If necessary, switch off the phone by pressing and holding
until the power-off image displays.
1. Slide the battery cover the direction of the arrow on the cover (as indicated) until you hear a click sound.
2. Carefully lift the battery cover away from the bottom of the phone.
Getting Started
4
3. Lift and remove the battery.
4. Carefully slide the SIM card into the SIM card socket until the bottom of the card touches the bottom of the
slot. Make sure that the card’s gold contacts face into the phone and that the upper-left angled corner of the
card is positioned as shown.
Note: If the card is not inserted correctly, the phone will not detect the SIM card. Remove the battery and re-orient the card back into
the slot.
5. Replace the battery by sliding the battery into the compartment so the tabs on the end align with the slots at
the bottom of the phone (as indicated).
6. Press the battery down until you hear a slight click sound.
5
7. Reinstall the battery cover by sliding the cover back onto the phone until you hear a click.
Note: Make sure the battery is properly installed before switching on the phone.
Getting Started
6
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. A travel adapter, which is used for charging the battery, is
included with your phone. Use only approved batteries and chargers. Ask your local Samsung dealer for further
details.
You can use the phone while the battery is charging, but doing so requires additional charging time.
Note: You must fully charge the battery before using your phone for the first time. A discharged battery recharges fully in approximately
200 minutes.
1. With the battery installed, temporarily remove the plastic cover on the right side of the phone (as indicated)
and plug in the travel adapter’s connector into the jack.
Important!: Verify that the handset battery is installed prior to connecting the travel adapter. If the battery is not installed and the travel
adapter is connected the handset will power cycle continuously preventing proper operation.
2. Plug the adapter’s power plug into a standard AC wall outlet.
Correct
+
Incorrect
7
Note: The previous illustration displays the incorrect method for connecting the charger. If attempted, damage to the accessory port
will occur therefore voiding the phone’s warranty.
3. When charging is finished, unplug the adapter’s power plug from the AC wall outlet and then disconnect the
travel adapter’s connector from the phone and resecure the plastic cover over the interface jack on the
phone.
Warning!: Failure to unplug the travel adapter before you remove the battery, can cause damage to the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time remain; a warning tone sounds and the “Battery low”
message repeats at regular intervals on the display. In this condition, your phone conserves its remaining battery
power, not by turning off the backlight, but by entering the dimming mode.
When the battery level becomes too low, the phone automatically turns off.
Switching the Phone On or Off
1. Press and hold
2. If the phone asks you to enter the phone password, use the keypad to enter your password and press either
the OK soft key or
until the phone switches on.
.
3. If the phone asks for a PIN, use the keypad to enter the PIN and press either the OK soft key or
. For
The phone searches for your network and after finding it, the term “T-Mobile” displays on the upper left half
of your screen. Now you can make or receive calls.
The display language is preset to English at the factory. To change the language, use the Language menu. For
4. When you wish to switch off the phone, press and hold
until the power-off image displays.
Getting Started
8
Setting Up Your Voice Mail
For new users, follow the instructions below to set up voice mail:
1. From Idle mode, press and hold
on the keypad.
You may be prompted to enter a password.
2. Follow the tutorial to create a password, a greeting, and record your name.
Note: These steps may be different depending on your network.
Accessing Your Voice Mail
You can access your voice mail by either pressing and holding
access voice mail using the menu:
on the keypad or by using the phone’s menu. To
1. From Idle mode, press Menu ➔ Messages ➔ Voicemail and press the Call soft key or
. Your phone
dials the specified voice mail number.
2. When connected, follow the voice prompts from the voice mail center.
9
Section 2: Understanding Your Phone
Thissectionoutlinessomekeyfeaturesofyourphone.Italsodisplaysthescreenandtheiconsthataredisplayedwhen
the phone is in use.
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many significant features. The following list outlines a few of the
features included in your phone.
•
•
•
•
•
•
VGA Camera with 4x Digital Zoom
®
Bluetooth Wireless Technology
User friendly, menu driven access to features and options
Text, Picture and Instant Messaging capability
Sound/Image media capability
Fun & Apps feature provides files, games, voice recorder, organizer, alarm, calendar, tasks, calculator, tip calculator, world
time, unit conversion, timer, and stopwatch.
SM
•
Web-enabled via web2go
Understanding Your Phone
10
Open View of Your Phone
The following illustrations show the main elements of your phone:
1
13
12
11
10
2
9
8
3
4
5
6
7
Keys
The following list correlates to the illustrations.
1. Receiver allows you to hear the other caller and the different ring tones or sounds offered by your phone.
2. Left Soft key allows you to select soft key actions or menu items corresponding to the bottom left line on the
display screen.
3. Send key allows you to make or answer a call. From Idle mode, recalls the last number dialed or received
when held down.
11
4. Cancel/Clear key deletes characters from the display. In Menu mode, this key returns you to the previous
menu level.
5. Voice mail key allows you to quickly access your voice mail. Press and hold this key for two seconds to
automatically dial your voice mail’s phone number.
6.
during phone calls and allows other callers to hear you clearly when you are speaking
Microphone is used
to them. It is also used in making voice note recordings.
7. Special function keys allow you activate unique features while in Idle mode. In Idle mode, if you press and
hold the key, you can turn on the Vibration Mode. Press and hold the key to enter a “P” (pause).
8. Alphanumeric keys allow you to enter numbers, letters, and some special characters.
9. Power On/Off (Exit) key ends a call. Press and hold this key for two seconds to turn your phone on or off.
While in the Menu mode, it returns the phone to Idle mode and then cancels your input.
10. Right Soft key allows you to select soft key actions or menu items corresponding to the bottom right line on
the display screen. In Idle mode, it also provides quick access to your phonebook.
11. OK (Select) key allows you to accept the choices offered when navigating through a menu.
12. Navigation key scrolls through the phone’s menu options and acts as a shortcut key from standby mode.
In Menu mode, scrolls through the phone’s menus and Phonebook.
From Idle mode:
• Up key: allows you to directly access the Call records.
• Down key: allows you to directly access the Contact list.
• Left key: allows you to create a new text message. If myFaves is enabled, this key allows your myFaves contacts to rotate one
position to the left.
• Right key: launches the Audio Postcard function. If myFaves is enabled, this key allows your myFaves contacts to rotate one
position to the right.
Tip: When entering text, use the Left or Right Navigation key to mark the position of the cursor.
Understanding Your Phone
12
13. Display shows all the information needed to operate your phone, such as the received signal strength, phone
battery level, and time.
Closed View of Your Phone
The following illustrations show the external elements of your phone:
3
1
2
1.
Volume keys allow you to adjust the Ring volume in standby mode (with the phone open) or adjust the
When receiving an incoming call, if you press the volume key, you can mute the
Speaker volume during a call.
ring tone. If you press and hold the volume key, you can reject the call.
2. Camera key allows you to take pictures when you are in camera mode. Launches the camera with a press.
Note: The phone must be open when you press the camera button.
3. Power/Accessory Interface connector allows you to connect a power cable or optional accessories, such as
a hands-free headset for convenient, hands-free conversations.
13
Display Layout
Your phone’s display screen provides a wealth of information about your phone’s status and options. The display
has 3 areas:
Icons
Text
Soft function
Keys
Missed Messages Tab
When you receive new messages, icons display in two locations, on the phone’s screen, Missed Messages tab, and
in the icon bar at the top of the screen.
Understanding Your Phone
14
Icons
This list identifies the symbols you’ll see on your phone’s display screen:
Shows the received signal strength. The greater the number of bars, the stronger the signal.
Shows the level of your battery. The more bars you see, the more power you have remaining.
Displays when a new text message was received.
Displays when a new voice mail was received.
Displays when a new picture message was received.
Displays when you are out of your service area.
Displays when a call is in progress.
Displays when the Incoming call sounds are set to vibration.
Displays when the Incoming call sounds are set to Melody and vibration.
Displays when the Incoming call sounds are set to Vibration then melody.
Displays when the Incoming call sounds are set to Melody then vibration.
Displays when Silent Mode is active.
Displays when Bluetooth wireless technology is active.
15
Backlight
A backlight illuminates the internal display and the keypad. When you press any key, the backlight comes on. It
goes off when no keys are pressed within a given period of time, depending on the setting within the Backlight
menu. The display turns off after one minute to conserve battery power.
The On setting is how long the keypad backlight is on. The Dim option is how much longer after the keypad
backlight goes off that the display remains lit.
To specify the length of time the backlight is active, access the Backlight menu:
1. From Idle mode, press the Menu ➔ Settings ➔ Display settings option and press the Select soft key
or
2. Select Backlight ➔ Duration and press the Select soft key or
3. Highlight the On option. Use the Left or Right Navigation key to select the time the backlight is on. You may
choose between 10 secs 15 secs 30 secs 1 min 3 mins, or 10 mins
4. Press the Down key to take you to the Dim option. Use the Left or Right Navigation key to select the time the
Dimming mode is on. You may choose between Off 5 secs 15 secs 30 secs 1 min, or 3 mins
5. Press the Save soft key to retain your new settings.
.
.
,
,
,
,
.
,
,
,
,
.
Display
Your phone has a display on the front of the phone. It indicates when you have an incoming call or message. It also
alerts you at a specified time when you have set an alarm. The backlight turns on and the corresponding icon
displays on the screen.
The display shows the current time on a digital clock.
My Account
This option provides you with account-specific information such as your current status, current activity, usage
details, plan and services, and bill summary.
1. From Idle mode, press the Menu ➔ My Account and press the Select soft key or
.
2. At the Want to connect? prompt, press Yes
.
3. Your account information displays.
Understanding Your Phone
16
Section 3: Call Functions
This section describes how to make or answer a call. It also explains the features and functionality associated with
making or answering a call. For more information on ringtones see “Ringtone” on page 56. For more information on
Making a Call
When the idle screen displays, enter the number you wish to dial and press
.
Making an International Call
1. Press and hold
2. Enter the country code, area code, and phone number.
3. Press to make the call.
. The + character displays.
Correcting the Number
1. To clear the last digit displayed, press
.
2. To clear any other digit in the number, press the Left or Right Navigation key until the cursor is immediately to
the right of the digit to clear and then press
3. To clear the whole display, press and hold
Ending a Call
. You can also enter a missing digit.
.
ᮣ
When you want to finish your call, briefly press
.
Redialing the Last Number
The phone stores the numbers of the calls you’ve dialed, received, or missed if the caller is identified.
To recall any of these numbers:
1. If you typed characters on the display, press
to return to Idle mode.
2. Press the Up Navigation key to display the most recent numbers used in the order you dialed or received
them.
3. Use the Up and Down Navigation keys to scroll through the numbers and highlight the number you want.
17
4. To view details of the number, press
.
Before you dial the number, you may also press the Options soft key to display the following options:
• Call back: Places a call back to the number.
• Send message: Allows you to send a Text message, Picture message, or Audio postcard.
• Save to phonebook: Allows you to save the selected phone number to the phonebook.
• Delete: Allows you to delete the highlighted number or all call records.
• Add to block list: Allows you to add the highlighted number to the blocked call list.
5. To dial the number, press
.
Making a Call from the Phonebook
You can store regularly used phone numbers into the phone’s memory or onto your SIM card. These entries are
collectively called the Phonebook.
Once you have stored a number in the Phonebook, you can dial it by pressing only a few keys. You can also assign
your most frequently-used numbers to number keys using the Speed Dial feature.
Adjusting the Call Volume
During a call, use the Volume keys on the left side of the phone, to adjust the speaker volume.
ᮣ
Press the Up volume key to increase the volume level and Down volume key to decrease the level.
From Idle mode, you can also adjust the ring volume using these keys.
Answering a Call
When somebody calls you, the phone rings and displays the incoming call image.
The caller’s phone number, or name if stored in Phonebook, is then displayed.
1. Press
or the Accept soft key to answer the incoming call.
Note: To reject an incoming call, press the Reject soft key or
.
2. End the call by pressing
.
Call Functions
18
Note: You can answer a call while using the Phonebook or menu features. After ending the call, the phone returns to the function screen
you were previously using.
Call Records
All incoming, outgoing and missed calls are listed in the Call Records. You can also view Call time records.
1. From Idle mode, press Menu ➔ Call records and press the Select soft key or
.
The following Call Record options are available:
All calls
This menu lets you view the 60 most recent calls you received, dialed, and missed.
The name or number, if already stored in your Phonebook, is displayed with the number of occurrences for each
number.
Note: At any time while you are in Call Records, you may use the Left or Right Navigation keys to scroll between All calls, Missed
calls, Incoming calls, and Outgoing calls.
Missed calls
This menu lets you view the 20 most recent calls you received, but did not answer. The name and number, if already
stored in your Phonebook, displays with the number of occurrences for each number.
Viewing Missed Calls
When you are unable to answer a call for any reason, you can find out who is calling you, if this service is available,
so that you can call the person back.
The number of calls you missed displays on the idle screen immediately after a call is missed.
1. If the display is off, press the volume key to turn the display on.
2. Press the Call soft key to dial the missed number.
3. Press the Up Navigation key to scroll through the missed calls. The Call records screen displays.
4. Press
to view the displayed number.
5. With the call details displayed, press the Options soft key:
• Call back: Places a call back to the number.
19
• Send message: Allows you to send a Text message, Picture message, or Audio postcard back to the missed number.
• Save to phonebook: Allows you to save the selected phone number to the phonebook.
• Delete: Allows you to delete the selected number or delete all call records.
• Add to block list: Allows you to add the highlighted number to the blocked call list.
Tip: You can press
at any time to exit the Missed Call feature.
Incoming calls
This menu lets you view the 20 most recent calls you received.
The name and number, if already stored in your Phonebook, is then displayed with the number of occurrences for
each number.
Outgoing calls
This menu lets you view the 20 most recent calls you dialed.
The name and number, if already stored in your Phonebook, displays with the number of occurrences for each
number.
Delete all
This menu allows you to delete all of the records in each call record separately, or you can delete all of your call
records at one time.
1. From the Idle screen, press Call records
2. Scroll through the options and press OK to place a check mark next to All calls
or Outgoing calls
➔
Delete all.
,
Missed calls
,
Incoming calls
,
.
3. Press Yes at the Delete? prompt to delete all call records, or No to cancel.
Vibration Mode
Vibration Mode is convenient when you wish to stop the phone from making any noise, in a theater for example.
From Idle mode, press and hold until the “Vibration Mode On” message and the Vibration Mode icon (
)
displays. In Vibration Mode, instead of sounds, your phone vibrates.
To exit and reactivate the previous sound settings, press and hold
again until the “Exit Vibration Mode
”
message displays. The Vibration Mode icon (
) no longer displays.
Call Functions
20
Selecting Functions and Options
Your phone offers a set of functions that allow you to customize it. These functions are arranged in menus and sub-
menus, accessed using the two soft keys. Each menu and sub-menu allows you to view and alter the settings of a
particular function.
Soft Keys
The roles of the soft keys vary depending on the function you are currently using. The labels on the bottom line of
the display just above each key indicate their current role.
Press the Left soft
Press the Right soft
key for Menu
key to access the
Phonebook menu.
mode.
Selecting Options
To view the various functions and options available, you must select the one you want by:
1. Press the appropriate soft key.
2. Press the Select soft key or
to select the function displayed or the highlighted option.
3. Press the Down Navigation key to view the next function or highlight the next option on a list
4. Press the Up key to move back to the previous function or option on a list.
5. Press the Back soft key to move back up one level in the menu structure
6. Press
to exit the menu structure without changing the settings.
21
7. In some functions, you may be asked for a password or PIN. Enter the correct code and press the OK soft key
or
.
When you access a list of options, your phone highlights the currently active option. If, however, there are only two
options, such as On/Off or Enable/Disable, your phone highlights the option that is not currently active, so that
you can select it directly.
Options During a Call
Your phone provides a number of control functions that are available for use during a call.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone off, so that the other person cannot hear you.
Example: You wish to say something to a person in the room but do not want the person on the phone to hear you.
To switch the microphone off temporarily:
ᮣ
Press Mute
The other person can no longer hear you. The Mute icon (
To switch the microphone back on:
.
) displays at the bottom left of the screen.
ᮣ
Press Unmute. The other person can hear you again.
Putting a Call on Hold
You can place the current call on hold whenever you want. You can also make another call while you have a call in
progress if your network supports this service.
To place a call on hold:
1. Press the Options soft key, highlight the Hold option, then press the Select soft key or
.
2. Press the Resume soft key to reactivate the call whenever you want.
To make a new call while you have a call in progress:
1. Enter the new phone number that you wish to dial or look it up in the Contact list.
2. Press
to dial the second call.
The first call is automatically placed on hold.
Call Functions
22
– or –
3. Press the Options soft key, select Hold, and press
. This places the currently active call on hold and
allows you to make a new call.
4. Make the second call in the normal way.
When you have both an active call and a call on hold, you may switch between the two calls by placing the current
held call to active and then placing the other on hold.
To switch between the two calls:
1. Press the Options soft key, select Swap, and press
on hold is then reactivated so that you can continue conversing with that person.
2. Press to finish and end each call normally.
. The current active call is placed on hold and the call
Using the Speakerphone
While on a call, you can use your Speakerphone by following these steps:
1. Press the Spkr on soft key.
2. Press the Spkr off soft key to turn the Speakerphone off.
Important!: For safety information related to speakerphone use, see “Responsible Listening” on page 104.
Muting or Sending Key Tones
During a call these options allow you to turn the key tones off or on. If the Mute keys option is selected, your phone
does not transmit the DTMF (Dual Tone Multi-Frequency) tones of the keys, which then allows you to press keys
without hearing annoying key tones during a call.
Note: To communicate with answering machines or computerized telephone systems, the Send DTMF option must be selected.
Searching for a Number in Phonebook
You can search for a number in Phonebook during a call.
1. Press the Options soft key.
2. Highlight Phonebook and press
.
23
With the Phonebook entries displayed:
3. Enter the name that you wish to find in the textbox located above the entries. If you enter the first few letters
of the name, the Phonebook entries are listed starting with the first entry matching your input.
– or –
Use the Up or Down Navigation key to highlight the contact that you desire.
4. Press the Select soft key or
. The Contact displays.
Call Waiting
You can answer an incoming call while you have a call in progress, if this service is supported by the network and
you must have previously set the Call waiting option to Activate. For more information, refer to “Call waiting” on
You are then notified of an incoming call by a call waiting tone.
To answer a new call while you have a call in progress:
1. Press either the Accept soft key or
to answer the incoming call. The first call is automatically placed
on hold.
2. Press the Options soft key, highlight Swap and press the Select soft key or
to switch between the
two calls.
3. Press the Options soft key and select the End held call option to end a call on hold, then press the Select
soft key or
4. Press
.
to end the current or remaining call.
Making a Multi-Party Call
A multi-party call is a network service that allows up to six people to take part simultaneously in a multi-party or
conference call.
For further details about subscribing to this service, contact T-Mobile customer service.
Setting up a Multi-Party Call
1. Call the first participant in the normal way.
Call Functions
24
2. Press the Options soft key and select the New call option.
3. Call the second participant in the normal way. The first call is automatically put on hold.
4. To join the first participant to this multi-party call, press the Options soft key and select Join. Press the
Select soft key or
.
Note: These first two calls are then grouped together on screen and displayed with an adjacent number corresponding to the order in
which the calls were made. There are a maximum of two callers that can be joined to a single multi-party line.
Having a Private Conversation With One Participant
When you have two participants in a multi-party session, you might be necessary to place one of those participants
on hold so that a private conversation can be held with a single caller. While you are in a multi-party call:
1. Press the Options soft key and choose the Split option. Press the Right Navigation key and select the number
to connect with. The call is split into two numbers the number you selected as the active number and the
second number on hold.
Note: You can now talk privately to that person while the other participants can continue to converse with each other. If there is only one
other participant, that person is then placed on hold.
2. To return to the multi-party call, press the Options soft key and select Join. Press the Select soft key or
.
All of the multi-party call participants can now hear each other again.
Dropping One Participant
1. Press the Options soft key, select Remove and press the Right navigation key.
2. Highlight the participant you want to drop from this call and press
.
The participant is dropped from the multi-party call.
3. Press
to end the multi-party call.
25
Section 4: Menu Navigation
This section explains the menu navigation for your phone.
Menu Navigation
You can tailor the phone’s range of functions to your needs using menus and sub-menus. Menus and sub-menus
can be accessed by scrolling using the Navigation keys or by using shortcuts.
Accessing a Menu Function by Scrolling
1. From Idle mode, press the Menu soft key to access the Menu mode.
2. Scroll using the Navigation keys to reach a main menu (for example: Settings). Press the Select soft key or
.
3. If the menu contains sub-menus, for example: Security, you can access them by pressing the Select soft
key or
after highlighting the sub-menu.
If the menu that you have selected contains further options, repeat this step.
4. To scroll through the menus, press the Up or Down Navigation keys.
5. To confirm the chosen setting, press the Select soft key or
6. To return to the previous menu level, press the Back soft key, or
7. To exit the menu without changing the settings, press
.
.
.
Menu Navigation
26
Using Shortcuts
The menu items, such as menus, sub-menus, and options, are numbered and can be accessed quickly by using
their shortcut numbers. For the main menus, you can access any one of them by pressing the number keys (1 to 0)
corresponding to their location on the screen.
Example: Accessing the Security menu.
1. Press the Menu soft key.
2. Press
3. Press
4. Press
for Settings.
for Phone settings
.
for Security.
27
Section 5: Entering Text
Thissectionoutlineshowtoselectthedesiredtextinputmodewhenenteringcharactersintoyourphone.Thissection
alsodescribeshow tousethe T9predictivetextsystemtoreduce thenumber ofkeystrokesassociatedwithentering
text.
Changing the Text Input Mode
When using your phone, you often need to enter text, such as when storing a name in your Phonebook, creating
your personal greeting or scheduling events on your calendar. You can enter alphanumeric characters by using your
phone’s keypad.
Your phone has the following text input modes:
•
T9: this mode allows you to enter words with only one keystroke per letter. Each key on the keypad has more than one letter;
for example, pressing can enter J, K, or L. However, the T9 mode automatically compares the series of keystrokes you
make with an internal linguistic dictionary to determine the most likely word, thus requiring far fewer keystrokes than the
traditional ABC mode.
•
•
•
ABC mode: this mode allows you to enter letters by pressing the key labeled with the letter you want.
Number: this mode allows you to enter numbers.
Symbol: this mode allows you to enter symbols, such as punctuation marks.
When you are in a field that allows characters to be entered, the text input mode indicator displays on the bottom
right of the screen.
Example: Writing a text message.
Entering Text
28
Create
1. To change the text input mode, press the Right soft key.
2. Scroll to the mode you prefer and press the Select soft key or
. The text input mode indicator displays in
the lower right corner of your display.
The following options are available:
•
•
•
•
T9 (English)
ABC mode
Number
Symbol
3. When the Text input mode indicator that you desire displays, you may enter text in the text message box using
the selected text input mode.
Using T9 Mode
T9 is a predictive text input mode that allows you to key in any character using single keystrokes. This text input
mode is based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word by pressing the 2 to 9 keys. Press each key only once for
each letter.
29
Example: To enter “Hello” in T9 mode, press the 4, 3, 5, 5, and 6 keys.
The word that you type displays on the screen. It may change with each consecutive key that you press.
2. Enter the whole word before editing or deleting the keystrokes.
3. When the word correctly displays, go to step 4.
If the word does not display correctly, press the
key to display the Spell soft key and follow the “To add
a new word into the T9 dictionary” procedure that follows.
4. Press to insert a space and start entering the next word.
To add a new word into the T9 dictionary:
1. Press the key to display the Spell soft key. Next, enter the new word and press OK to add the word to
the dictionary.
2. Enter the word you want to add using ABC mode. For more information, refer to “Changing the Text Input
3. Press the OK soft key or
after you finish entering the new word.
The word is added to the T9 dictionary and becomes a word for the associated keypress series.
Note: This feature may not be available for some languages. The 1 key has some emoticons associated with it. To enter other special
characters within the T9 mode, press and hold
to cycle through these characters.
•
•
•
To enter periods, hyphens, apostrophes, and other special characters, press
these available characters. T9 mode applies grammar rules to ensure that correct punctuation is used.
and then press
to cycle through
To shift case in T9 mode, press
upper, right corner of the screen.
. There are 3 cases: Initial capital, Capital lock, and Lower case. The case displays in the
You can move the cursor by using the Navigation keys. To delete letters, press
display.
. Press and hold
to clear the
Using ABC Mode
To use ABC mode, use the 2 to 9 keys to enter your text.
Entering Text
30
1. Press the key labeled with the letter you want:
•
•
Once for the first letter
Twice for the second letter, and so on
2. Select the other letters in the same way.
•
Press and hold
to ensure correct punctuation.
to enter periods, hyphens, apostrophes, and other special characters. ABC mode applies grammar rules
•
Press to shift case in ABC mode. There are 3 cases: Initial capital, Capital lock, and Lower case.
You can move the cursor by using the Navigation keys. Press
the display.
to delete letters. Press and hold
to clear
Note: The cursor moves to the right when you press a different key. When entering the same letter twice or a different letter on the
same key, just wait for a few seconds for the cursor to move to the right automatically, and then select the next letter.
Keys
By default, the first letter of an entry is capitalized and all consecutive letters are kept in lowercase (unless the Shift
key is used). After a character is entered, the cursor automatically advances to the next space after two seconds or
when you enter a character on a different key.
Characters scroll in the following order (lowercase characters shown in parentheses):
P Q R S 7 (p q r s 7)
. @ , - ? ! : ( ) / 1
A B C 2 (a b c 2)
D E F 3 (d e f 3)
T U V 8 (t u v 8)
W X Y Z 9 (w x y z 9)
G H I 4 (g h i 4)
J K L 5 (j k l 5)
Short press: space
Long press: 0
Symbol (press and hold)
31
M N O 6 (m n o 6)
Short press: Shift
Long press: toggles from
T9 to ABC mode.
Using Number Mode
The Number mode enables you to enter numbers into a text message.
ᮣ
Press the 1-0 keys until the corresponding digit displays.
Using Symbol Mode
Symbol mode enables you to insert symbols and punctuation marks into text. To display a list of symbols press and
hold
.
1. To select a symbol, press the corresponding number key.
2. To display more symbols, press the Navigation keys.
3. To clear the symbol(s), press
. When the input field is empty, this key returns the display to the previous
mode.
4. To insert the symbol(s) into your message, press the OK soft key or
.
Entering Text
32
Section 6: Understanding Your Phonebook
This section explains how to use and manage your Phonebook. You can save phone numbers to your phone’s memory
or to your SIM card.
Storing a Number in the Phone’s Memory
The default storage location for saving phone numbers to your phonebook is your phone’s built-in memory. You can
also save your numbers to your SIM card or setup a default location so that whenever a new phonebook entry is
created, you are prompted to choose between Phone or SIM card. For information on how to change this setting, see
“Default Saving” on page 40. Also, numbers that were stored on your SIM card can later be copied to your phone’s
memory.
Note: When you copy a phone number from your SIM card to your phone, the number displays twice in your Contact list.
Note: When storing a Phonebook entry into your SIM card, note that only the Name, and Number are saved. To save additional
information for a particular contact, such as notes, e-mail, etc., it is important to save that Contact into your phone’s onboard
memory.
1. From Idle mode, press the Menu ➔ Phonebook and press the Select soft key or
2. Press Add new contact
.
.
Note: Navigation is slightly different if you press the Phonebook soft key.
3. Enter a first name in the First name text box. Tab to the next text box by pressing the Down Navigation key.
For further details about how to enter characters, see “Using ABC Mode” on page 30.
4. Enter a last name in the Last name text box.
5. Highlight a number type by pressing the Up or Down Navigation key, then enter a number in the text box.
The following options are available:
• Mobile: assigns the number entered to the Mobile entry.
• Home: assigns the number entered to the Home entry.
33
• Office: assigns the number entered to the Work entry.
• Picture ID: allows you to assign a Picture ID by using Take picture, or assigning a photo
from the Photos, Downloaded images, or the Icons folder.
• Ringtone: allows you to assign a Ringtone by choosing from one of the following locations: Default melodies, Voice list, or
Sounds.
• E-mail: allows you to enter the email address for the contact.
• Fax: assigns the number entered to the Fax entry.
• Other: allows you to enter more detailed information for the entry.
• Group: allows you to assign this contact to a group (selections are: Family, Friends, Work, or Unassigned).
• Notes: allows you to enter additional information about the contact. Up to 50 characters are allowed.
6. Press Save or
. The number is saved to your phone and the new contact information displays.
7. Press to return to the Idle screen.
Storing a Number in the SIM Card
The default storage location for saving phone numbers to your phonebook is your phone’s built-in memory. To save
a number to your SIM card, you need to change the Default saving option first.
Note: When you copy a phone number from your SIM card to your phone, the number displays twice in your Contact list.
1. From Idle mode, press the Menu ➔ Phonebook ➔ Management ➔ Default saving and press the Select
soft key or
.
Important!: The Default saving option is only accessible if the Phone and SIM card option is selected in the View contacts menu.
Menu
➔
Phonebook
➔
Management
➔
View contacts
➔
Phone and SIM card.
2. Highlight SIM card and press the Select soft key or
.
3. Press the Back soft key until you return to the main screen (Idle mode) or press
.
Note: You can also set the Default saving option to Ask on saving in the Management menu. With this option, you are prompted for the
storage location each time you add a new contact. For more information, refer to “Default Saving” on page 40.
Now that if your phone is set up to store contacts to your SIM card, follow this procedure to store a number.
Understanding Your Phonebook
34
1. From Idle mode, press Menu ➔ Phonebook ➔ Add new contact.
2. Enter a name for your contact into the Name field. A SIM card entry has only one available name field. Tab to
the next text box by pressing the Down Navigation key.
For further details about how to enter characters, see “Using ABC Mode” on page 30.
3. Use the keypad to enter a number into the SIM card number field.
4. Press the Save soft key or
. The number saves to your SIM card.
After storing, the phone displays the new Phonebook entry.
5. To use the entry options before saving the number, highlight the Name field and press the Options soft key.
The following options are available:
• Select language: allows you to select the language for text messaging this contact. Selections are English, Français, or Español.
• Cancel: exits the Add new contact screen and displays the Phonebook menu.
6. Press
to return to the Idle screen.
Finding a Phonebook Entry
You can store phone numbers and their corresponding names onto either your SIM card or phone’s built-in memory.
They are physically separate but are used as a single entity, called Phonebook.
Depending on the storage size of the particular SIM card, the maximum number of phone numbers the card can
store may differ.
1. From Idle mode, press the Menu ➔ Phonebook ➔ Contact list.
– or –
From Idle mode, press the Phonebook soft key.
Tip: Press the Down Navigation key to access the Contact list and bypass the menu.
35
Note: The Phone and SIM card option from Management
➔
View contacts option must be selected in order to display both Phone and
SIM entries.
Any contact which was stored on the SIM card displays with a SIM card icon to the left of the entry. Any contact which was
stored on the phone displays with a phone icon to the right of the entry.
2. Enter the first few letters of the name in the text box.
The Phonebook entries display as a list, starting with the first entry matching your input.
– or –
Press the Up or Down Navigation key until the entry you want highlights.
3. Once you locate the desired entry, press
to dial the number, or press the Options soft key to access the
following Phonebook entry options:
• Edit: allows you to edit the Name and number for the selected contact.
• Send message: allows you to send a message to the selected number. You may choose between Text message, Picture
message, or Audio postcard.
• New contact: takes you to the Add new contact menu.
• Call: places a call to the selected phone number.
• Assign speed dial: allows you to assign a speed dial key number to the selected Phonebook entry.
• Send name card: allows you to send your name card via Text message or Picture message.
• Delete: allows you to delete Phonebook entries. Choose to delete Selected, Multiple or All names and numbers. You are asked
to confirm that you wish to delete the names and numbers by pressing the Yes soft key. To cancel, press the No soft key.
• Add to block list: adds the selected entry to the block list.
• Copy to Phone/SIM card: allows you to copy the selected contact entry or all contact entries to the Phone or SIM card.
• Mobile backup: allows you to view the information for your Last sync, also offers About mobile backup.
• Select language: allows you to select between English, Français, and Español.
4. If you selected the View option from the above listing, press the Options soft key after the contact
information displays, for these additional options:
• Edit: allows you to edit the name and number fields in the entry. You can also add an email address and notes.
Understanding Your Phonebook
36
• Send message: allows you to send a message to the selected number. You may choose between Text message, Picture
message, or Audio postcard.
• Assign speed dial: allows you to assign a speed dial key number to the selected Phonebook entry.
• Send name card: allows you to send your name card via Text message or Picture message.
• Delete: allows you to delete the selected name and number from your Phonebook or delete all numbers. You are then asked to
confirm that you wish to delete the name and number by pressing the Yes soft key. To cancel, press the No soft key.
• Copy to phone/SIM card: allows you to copy the selected number or all numbers to your phone, or SIM card.
• Add to block list: Allows you to add the highlighted number to the blocked call list.
5. Press Call to dial the selected number.
Dialing a Number from Phonebook
Once you have stored phone numbers in the Phonebook, you can dial them easily and quickly by using the location
numbers that were assigned to them in the Phonebook.
Note: If you cannot remember a location number, you must go into the Contact list menu in the Phonebook menu to search for the
Creating and Editing a Caller Group
ᮣ
From Idle mode, press the Menu ➔ Phonebook ➔ Groups
To create a new group:
1. Press Options
2. Enter a name for the new group in the Name field.
.
➔
Create new group.
3. Highlight the Picture ID field to select an image associated with the Caller group and press
.
The following options are available:
• Take picture: allows you to take a picture with your camera.
• Photos: allows you to choose a photo from Photos folder.
• Downloaded images: allows you to choose a photo from your Downloaded images folder.
• Icons: displays a list of pre-defined icons.
4. Highlight the Ringtone field to select a ringtone associated with the Caller group and press
.
37
The following options are available:
• Default melodies: allows you to choose between 10 different melodies.
• Voice list: allows you to assign a voice clip to this group.
• Sounds: allows you to choose a sound from your Sounds folder.
5. Press Save when you finish.
6. Press
to return to Idle mode.
To edit a group:
1. Scroll through the group list by pressing the Up or Down Navigation key.
2. Highlight the group you want and press the Options ➔ Edit.
3. Modify the text in the Name text box to edit the Caller group name.
4. Highlight the Picture ID field to change the image associated with the Caller group and press
5. Highlight the Ringtone field to change the ringtone associated with the Caller group and press
6. Press the Save soft key when you finish.
.
.
7. Press
to return to Idle mode.
Speed Dialing
Once you have stored phone numbers from your Phonebook list, you can set up to 8 speed dial entries and then
dial them easily whenever you want, simply by pressing the associated numeric key.
From Idle mode, press and hold the appropriate key (2 to 9) to speed dial the numbers assigned to keys (2 to 9).
Setting Up Speed Dial Entries
1. From Idle mode, press the Menu ➔ Phonebook ➔ Speed dial.
2. Use the Navigation keys to select the keypad number key where you wish to assign the new speed-dialing
number and press the Add soft key or
.
3. Highlight a contact entry number from the list and press the Select soft key or
.
You receive a Saved confirmation and the Speed dial menu displays the number assigned to the number key
you selected.
Understanding Your Phonebook
38
4. Press
to return to the Idle screen.
Note: Memory location 1 is reserved for your Voice mail server number and this speed dial location can not be changed.
Dialing a Number from the SIM Card
1. From Idle mode, press the keypad corresponding to the speed dial location number for the desired phone
number you want to dial.
2. If you don’t know the location number, press
and the first location number displays.
You can then press the Left or Right key to find other numbers in the list.
3. When you select the number you want to dial, press either the Call soft key,
, or
.
Deleting all of the Phonebook Entries
You can delete all your entries from your phone’s memory, your SIM card, FDN, or All.
Important!: Once Phonebook entries are deleted, they cannot be recovered.
1. From Idle mode, press the Menu ➔ Phonebook ➔ Management ➔ Delete all.
2. Press
3. Press the Yes soft key at the Delete prompt.
4. Enter a password at the prompt and press the OK soft key or press the Back soft key to cancel.
to place a check mark next to All, Phone, SIM, or FDN and press the Delete soft key.
5. Press
to return to the Idle screen.
Block list
The Block list menu allows you to create a list of numbers to block from your handset.
To create a new block list:
1. From Idle mode, press the Menu ➔ Phonebook ➔ Block list.
2. Press
, then select one of the following options:
• Number: allows you to enter a phone number to add to the block list.
• Contacts: allows you to select a contact from the Contact list to add to the block list.
39
• Recent contacts: allows you to select one or multiple contacts from the Recent contacts list to add to the block list.
• Unknown numbers: adds any unknown numbers to the block list.
• FDN contacts: allows you to select a contact from the FDN list to add to the block list.
Management
The Management menu allows you to select where your contacts are saved, copy your SIM contacts to your phone
and phone contacts to your SIM card, sort by contacts, delete your contacts, or check your memory status.
ᮣ
From Idle mode, press Menu ➔ Phonebook ➔ Management.
View Contacts
The View Contacts option allows you to choose to display only those names and numbers stored on your SIM card
or only those stored in your phone’s built-in memory. To display all, choose the Phone and SIM card option.
Note: The Phone and SIM card option from the Management ➔ View contacts option must be selected in order to access all
phonebook management options.
Default Saving
The Default Saving option allows you to choose where your contacts save.
Important!: The Default saving option is only accessible if the Phone and SIM card option is selected in the View contacts menu. Menu
➔
Phonebook
➔
View contacts
➔
Phone and SIM.
ᮣ
Menu ➔ Phonebook ➔ Management ➔ Default saving.
The following options are available:
•
•
•
Phone: new phonebook contacts are saved to your phone. Your phone comes with the default set to Phone memory.
SIM card: new phonebook contacts are saved to your SIM card.
Ask on saving: you are prompted to choose between Phone or SIM Card whenever you save a new contact.
Copy all to
This option allows you to copy all contacts from your SIM card to your Phone or from you Phone back onto your SIM
card. When you copy entries to the phone, duplicate entries are created.
You can copy all SIM entries to the Phone using this option.
1. From Idle mode, press Menu ➔ Phonebook ➔ Management ➔ Copy all to.
Understanding Your Phonebook
40
2. Highlight SIM card and press the Select soft key or
.
3. Highlight the entry you want to copy and press
to place a check mark next to the selection. Repeat this
for each entry to want to copy.
4. Press the Copy soft key to copy the selected entry to the SIM card.
Note: Some options are available for phone entries which might not be available when the entry is stored to the SIM card. For more
Sort by contacts
The Sort by contacts menu option allows you to set the sort function to alphabetize the contacts by First name or
Last name.
Delete all
Important!: Once contact entries are deleted, they cannot be recovered.
This option allows you to delete your contacts. You may delete from All, Phone, SIM, or FDN. For more information,
Memory Status
You can check how many names and numbers are stored in the Phonebook, within both SIM card and the phone
memory. You can also see the current storage capacity of both memories.
1. From Idle mode, press the Menu ➔ Phonebook ➔ Management ➔ Memory status.
2. Press
or the Back soft key when you are finished.
Own Number
This function is a memory aid, which you can use to edit or remove your own phone number. You can also edit the
default name assigned to your phone number.
1. From Idle mode, press the Menu ➔ Phonebook ➔ Own number.
2. Press Edit
. The cursor displays in the Name field.
3. Press
and type in a new name if desired.
41
4. Press the Down Navigation key, press
and type in a new number if desired.
5. Press the Save soft key when finished.
FDN List
FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict your outgoing calls to a limited
set of phone numbers.
The FDN List allows you to set up a list of numbers that your phone may dial.
FDN mode must first be enabled in the Security settings. For more information on changing this setting, see “Set
To enable FDN mode, a PIN2 number is required. You can obtain your PIN2 from
T-Mobile customer service.
1. From Idle mode, press the Menu ➔ Phonebook ➔ FDN list.
2. Enter phone number into the list by:
•
•
Pressing the Options soft key, select New FDN contact or press
.
Entering the PIN2 number obtained from T-Mobile’s customer service center and begin to create your restricted phone list.
Understanding Your Phonebook
42
Section 7: Messages
This section describes how to send or receive different types of messages. It also explains the features and
functionality associated with messaging.
Types of Messages
Your phone provides the following message types:
•
•
•
•
•
Text Messages
Picture Messages
Audio Postcard
Voicemail
Instant Messaging
Text Messages
Short Message Service (SMS) allows you to send and receive short text messages to and from other mobile phones.
In addition, your phone supports the Enhanced Messaging Service (EMS), which enables you to include simple
graphics, melodies, and animated images in your messages. To use this feature, you must subscribe to
T-Mobile's message service.
The Message icon ( ) displays when you have received a new text message. When the memory is full, the
message icon flashes on your phone and you cannot receive any new messages. You must delete a message before
you can receive additional messages.
ᮣ
Use the Delete option in each message box to erase obsolete messages.
Create new
In this menu, you can write and send a text message.
Creating a Simple Text Message
1. From Idle mode, press Menu ➔ Messages ➔ Create message ➔ Text message.
2. Create your message.
You can enter up to 160 standard Alphabet characters per page in your message. The message can be up to 12 pages long for a
total of 1836 characters.
43
3. Press the Options soft key when you finish entering your message. The following options are available:
• Insert from: allows you to insert from the Text templates, Phonebook, or Bookmarks. The Text messages template allows you
to apply one of the preset message templates to the text. Select one of the 10 items stored in the Text template menu.
Phonebook allows you to add names and phone numbers to your message. Bookmarks allows you to add Internet addresses
to your message.
• Add content: allows you to add a Picture, Animation, or Melody to your message.
• Attach: allows you to attach a Namecard, Schedule, Anniversary item, Miscellaneous item, or Task to your message.
• Save to drafts: saves the message to the Drafts folder.
• Select language: allows you to set the language to English, Français, and Español.
• Text style: allows you to format the style of the text. For the Text size, Large, Medium, and Small size are available. Text mode
options are Normal, Underline, and Strikethrough. The options for Bold and Italic are set by pressing
checkmark by them. Alignment options are Left, Center, and Right.
to place a
• Exit composer: allows you to exit the message composer and determine what to do with the content. Displays the following
selections: Save message, Don’t save, or Continue writing.
4. Press the Send to soft key.
5. Highlight one of the following send options:
• Recent recipients: allows you to select a number or an address from the last 20 destinations you entered.
• Phonebook: allows you to enter the phone number you want from your phonebook.
• New recipient: allows you to enter a phone number.
The number you selected is entered in the To text box.
6. Press the Add soft key for the following options:
• Recent recipients: allows you to select a number or an address from the last 20 destinations you entered.
• Phonebook: allows you to enter the phone number you want from your phonebook.
• New recipient: allows you to enter a phone number.
7. Press Send or
to send the message.
Messages
44
Picture Messages
This menu allows you to use the Multimedia Message Service (MMS).
Picture Messaging is a messaging service that provides delivery of personal picture messages from phone to phone
or from phone to email.
In addition to the familiar text content available via traditional text messages, picture messages can contain images,
graphics, voice, and audio clips.
A Picture Messaging message is a multimedia presentation contained in a single file. It is not a text file with
attachments.
This type of message must first be retrieved from T-Mobile’s before it can be viewed. The
displays in your
Inbox list to indicate any unretrieved picture messages. The Message icon (
successfully retrieved a new picture message.
) displays once you have
Using the Picture Messaging feature, your phone can receive and send messages that contain multimedia files,
such as photos, sounds and images that you downloaded from the Internet and voice notes you recorded. This
function is available only if it is supported by your service provider. Only phones that offer picture messaging
features can receive and display picture messages.
Create new
This menu allows you to create a new picture message and then send it to one or more destinations.
Creating and Sending a Picture Message
1. From Idle mode, press Menu ➔ Messages ➔ Create message ➔ Picture message.
2. Highlight Subject and press
.
3. Enter the subject of your message and press
.
Note: For more information about entering characters, see “Using ABC Mode” on page 30.
4. Highlight Image and press
to add a picture.
5. Highlight one of the following options and press the Select soft key or
.
• Take picture: launches the camera for you to take a picture.
• Photos: allows you to select a picture from your images folder.
45
• Downloaded images: allows you to select a previously downloaded image to send in the picture message.
6. Select an image or photo and press Add to add it to your message.
7. Highlight Sound and press
to add a sound.
8. Highlight one of the following options and press the Select soft key or
.
• Record audio: allows you to record a new voice message.
• Sounds: allows you to select a sound from your Sounds folder.
• Voice list: takes you to the Voice list (Recorded audio) folder to select a voice note to add.
9. Select a sound or voice note and press the Add soft key to add the sound to your message.
10. Highlight Message and press
to add a text message.
.
11. Enter your message and press
12. Select a category and press Edit to change the Subject or Message.
13. Select a category and press Change to change the image or sound with another one.
14. Press the Send to soft key when you finish creating the message.
15. Highlight one of the following send options, press the Select soft key.
• Recent recipients: allows you to select a number or an address from the last 20 destinations you entered.
• Phonebook: allows you to enter the phone number you want from your phonebook.
• New recipient: allows you to manually enter a Phone number or Email address.
• My Album: allows you to send the message to My Album.
The number or address you selected is entered in the To text box.
16. Press Send
. Your phone sends the message.
Messages
46
Inbox
The Inbox stores messages that you have received. You can tell what kind of message it is by the icon displayed. If
the open envelope icon displays then the message was read, otherwise the closed envelope icon displays.
The following types of messages may display in your Inbox:
Text messages
Picture messages
Audio Postcard
Push messages
When you enter the Inbox, the list of messages displays with the sender’s phone numbers, or names, if available in
your Phonebook. The envelope displays as open in the icon after you have read the message.
Note: Press the Left or Right Navigation keys to scroll between Inbox, Sentbox, and Drafts.
ᮣ
From Idle mode, press the Menu ➔ Messages ➔ Inbox.
Viewing a Text Message from the Inbox
1. Select a text message from the list and press the Options soft key.
The following options display:
• Reply via: allows you to send a reply to the sender by sending a Text message, Picture message, or Audio postcard.
• Call back: Places a call back to the number.
• Forward: allows you to forward the text message to another person.
• Delete: deletes the selected Text message or Multiple messages.
• Move to phone/SIM card: allows you to move the message from the SIM card into the phone’s memory or moves the message
from the phone to the SIM card. Depends on where the current message was saved.
• Sort by: allows you to sort messages by Read/Unread, Date, Sender, Type, Size, or Subject.
• Lock/Unlock: allows you to lock the message to protect it from deletion, or unlock it to allow deletion.
2. Press View
to read the message contents.
47
3. Press the Up or Down Navigation key to scroll through the contents.
While reading a text message, you may choose the following options by pressing the Options soft key:
• Reply via: allows you to send a reply to the sender by sending a Text message, Picture message, or Audio postcard.
• Call back: places a call back to the number.
• Forward: allows you to forward the message to another number.
• Save address: allows you to extract the sender’s number and URL, email addresses or phone numbers from the message text,
so that you can save them in your phone’s memory.
• Delete: allows you to delete the message.
• Move to phone/SIM card: allows you to move the message from the SIM card into the phone’s memory or moves the
message from the phone to the SIM card. Depends on where the current message was saved.
• Lock/Unlock: allows you to lock the message to protect it from deletion, or unlock it to allow deletion.
Viewing a Picture Message from the Inbox
1. Highlight a retrieved picture message
from the list and press View
.
2. While viewing the picture message, you may choose the following options by pressing the Options soft key:
• Reply via: allows you to send a reply to the sender by sending a Text message, Picture message, or Audio postcard.
• Reply all via: allows you to send a reply to the sender and all other recipients by sending a Picture message or Audio postcard
• Call back: allows you to call the sender back.
• Forward: allows you to forward the message to another number.
• Replay: allows you to review the picture message.
• Save address: allows you to save the selected address to the Phonebook.
• Save media: allows you to save message media to your Image folder, Sound folder, vCard, or vCalendar.
• Delete: deletes the selected or multiple picture message(s).
• Lock/Unlock: allows you to lock the message to protect it from deletion, or unlock the message to allow deletion.
• Properties: shows you information about the message, such as Subject, Received date, From, To, Cc, Size, and Priority.
Messages
48
Viewing an Audio Postcard from the Inbox
1. Select an Audio Postcard
from the list and press the Options soft key.
The following options display:
• Reply via: allows you to send a reply to the sender by sending a Text message, Picture message or Audio postcard.
• Reply all via: allows you to send a reply to the sender by sending an Audio postcard or Picture message.
• Call back: allows you to call the sender back.
• Forward: allows you to forward the message to another number.
• Delete: allows you delete the selected or multiple Audio postcards.
• Sort by: allows you to sort messages by Read/Unread, Date, Sender, Type, Size, or Subject.
• Lock/Unlock: allows you to lock the audio postcard to protect the message from deletion, or unlock the audio postcard to allow
deletion.
• Properties: shows you information about the message, such as subject, Received date, From, To, Cc, Size, and Priority.
2. Press Play
to listen to the message contents.
3. While listening to the message, press the Options soft key and select one of the following:
• Reply via: allows you to send a reply to the sender by sending Text message, Picture message or Audio postcard.
• Reply all via: allows you to send a reply to the sender by sending an Audio postcard or Picture message.
• Call back: allows you to call the sender back.
• Forward: allows you to forward the message to another number.
• Replay: allows you to replay the Voice note.
• Save address: allows you to extract the sender’s number and URL, email addresses or phone numbers from the message text,
so that you can save them in your phone’s memory.
• Save media: allows you to save message media to your Image folder, Sound folder, vCard, or vCalendar.
• Delete: allows you to delete the selected message.
• Sort by: allows you to sort messages by Read/Unread, Date, Sender, Type, Size, or Subject.
• Lock/Unlock: allows you to lock the audio postcard to protect it from deletion, or unlock the audio postcard to allow deletion.
• Properties: shows you information about the message, such as Subject, Received date, From, To, Cc, Size, and Priority.
49
Viewing a Picture Message When You Receive It
When a new picture message comes in, the display shows the Picture Messaging Message icon.
1. Press the View soft key to view the message.
– or –
Press the Exit soft key if you want to view the message later in the Inbox.
2. Press the Options soft key or
3. Press when you are finished.
Audio Postcard
to access the various options previously described.
In this menu you can select a frame, take a picture and then record a voice message up to one minute long and
send it as an Audio Postcard.
1. From Idle mode, press Menu
➔
Audio postcard.
2. Center a subject in the frame and press the Camera soft key or the Camera key to take a photo for the
postcard. The photo saves to the Photos folder.
3. Press the Add voice soft key to add a voice note to this postcard.
4. Press the Stop soft key when you finish recording the voice message.
5. Press the Send to soft key and select one of the following options:
• Recent recipients: allows you to select a number or an address from the last 20 destinations you entered.
• Phonebook: allows you to enter the phone number you want from your phonebook.
• New recipient: allows you to manually enter a Phone number or Email address.
• My Album: allows you to save this Audio postcard to My Album.
6. Press the Add soft key and continue adding additional recipients.
– or –
Press the Send soft key after you select a recipient.
Messages
50
Instant Messaging (IM)
Instant Messaging is a way of sending short, simple messages that are delivered immediately to users online at that
moment.
Before using this feature, you need to subscribe to a messenger service. For further details, contact T-Mobile
customer service. Your handset has 4 pre-loaded Messaging services (AIM, Windows Live, and Yahoo!).
Starting your Instant Messaging
1. From Idle mode, press the Menu ➔ IM.
2. Highlight the messenger service to which you are subscribed to using the Up or Down Navigation key and
press the Select soft key or
.
3. Highlight the Sign in option, and press the Select soft key or
.
4. Enter the required sign on information such as ID and password, then press the Down Navigation key.
Note: The information required for sign on varies depending on the Instant Messaging provider you use.
5. With all of the appropriate fields filled in, press the Sign in soft key or
.
6. If you use Windows Live, agree to the terms and conditions of use for this service and press the I Accept
soft key.
7. Follow the on-screen instructions to read, reply to, compose, send, and manage your Instant Messaging
account.
Using the Instant Messenger Options
After selecting an Instant Messaging service, the following options display:
•
•
•
•
Sign in: allows you to login to your Instant Messaging account.
Saved conversations: shows permanent records of your Instant Messaging conversations.
Offline conversations: shows a listing of any conversations made while you were offline.
Preferences: this option allows you to delete Favorite IDs, turn Power on sign in On or Off, turn Auto-sign in On or Off, and
adjust the sound settings for Receive message, Contact(Buddy) alert, System message, Repetition.
Help: provides helpful information about IM providers such as: Sign up, Sign in, Buddies, Sending IMs, Receiving IMs, Privacy,
and Away.
•
51
Sentbox
This message box stores messages that you attempted to send but have not actually sent.
When you enter this menu, the list of messages in the box displays with the recipients’ phone numbers or names, if
available in your Phonebook.
1. From Idle mode, press the Menu ➔ Messages ➔ Sentbox.
Note: Press the Left or Right Navigation keys to scroll between Inbox, Sentbox, and Drafts.
2. Select a message from the list and press View
to view the message contents, or Play
if you sent
an Audio postcard message.
3. Press the Up or Down Navigation keys to scroll through the contents.
Note: While reading a message, press the Options soft key to choose different options.
Drafts
This message box stores messages that you may want to edit or send at a later time.
When you enter this menu, the list of messages in the box displays.
1. From Idle mode, press the Menu ➔ Messages ➔ Drafts.
Note: Press the Left or Right Navigation keys to scroll between Inbox, Sentbox, and Drafts.
2. Select a message from the list and press the Options soft key.
3. Highlight the Edit option and press the Select soft key or
to edit the message contents.
4. Press Send to (while viewing the message) to send the message.
Tip: While viewing a draft message, press the Options soft key to choose different options. Options depend on the type of message.
Messages
52
Templates
Besides entering message text using the keypad keys, you can speed message composition by including copies of
stored text and/or image templates in your message.
1. From Idle mode, press the Menu ➔ Messages ➔ Templates.
2. Select a template from the Templates list and press View
.
The template displays on the screen.
3. Press the Send to
soft key and select one of the following options:
• Recent recipients: allows you to select a number or an address from the last 20 destinations you entered.
• Phonebook: allows you to enter the phone number you want from your phonebook.
• New recipient: allows you to manually enter a phone number.
4. Press Send
after selecting a recipient.
The template message sends to the selected recipient(s).
Voicemail
This menu provides you with a way of accessing your voice mailbox, if provided by your network.
1. From Idle mode, press the Menu ➔ Messages ➔ Voicemail.
2. Press Call to dial voicemail.
Tip: From the Idle mode, press and hold
to connect to the voice server.
Note: Voice mail is a network feature. Please contact T-Mobile customer service for further details.
Settings
The Settings menu allows you to select where your contacts are saved, copy your contacts to your phone or SIM
card, delete your contacts, or check your memory status.
ᮣ
From Idle mode, press Menu ➔ Messages ➔ Settings.
53
Messages settings
In this menu, you can set up a default text message or a picture message. The last setting you accessed is
automatically activated for sending subsequent messages.
1. From Idle mode, press Menu ➔ Messages ➔ Settings ➔ Messages settings.
2. Select one of the following options and press the Select soft key or
.
Text message
•
•
•
Service center: displays the phone number of your message center, which is required when sending messages. You cannot
modify this number.
Reply path: allows the recipient of your message to send you a reply message using your message center, if your network
supports this service.
Delivery report: allows you to activate or deactivate the report function. When this function is activated, the network informs
you whether or not your message was delivered.
Picture message
Send settings
•
•
•
•
Delivery report: when this option is enabled, the network informs you whether or not your message was delivered.
Read reply: when this option is enabled, your phone sends a request for a reply along with your message to the recipient.
Priority: you can select the priority level of your messages. Selections are: Normal, High or Low.
Expiry date: set the length of time your messages are stored in the message center while the network attempts to deliver
them. Selections are: 1 hour, 6 hours, 1 day, 1 week, or Maximum.
•
Delivery time: you can set a delay time before the phone sends your messages. Selections are: Immediately, 1 hour later, 6
hours later, 12 hours later, 1 day later, 3 days later, 1 week later, or 1 month later.
Receive settings
•
•
•
Anonymous reject: you can set your phone to automatically reject anonymous messages.
Ads allowed: you can set your phone to automatically receive advertising messages.
Report allowed: you can set the option to receive a delivery report.
Messages
54
Delete all
This menu allows you to delete all of the messages in each message box. Or, you can delete all of the messages in
all message boxes at one time.
Important!: Once messages are deleted, they cannot be recovered.
1. From Idle mode, press Menu ➔ Messages ➔ Settings ➔ Delete all and press
.
2. Highlight a message box to clear and press to place or remove a check mark next to your selection.
3. Press the Delete soft key to delete the marked objects.
4. After you receive the Delete? confirmation, press the Yes soft key or press the No soft key.
Memory status
To view the memory status:
ᮣ
From Idle mode, press Menu ➔ Messages ➔ Settings ➔ Memory status and press the Select soft key
or
.
You can view the amount of the allocated memory and the memory available for picture messages.
The display shows the total space including the used and free space. You can also view how much space and the
number of messages currently occupying each message box type:
• Text Message (saved on the phone)
–
–
–
–
–
Phone
SIM card
Inbox
Sentbox
Draft
• Picture message
–
–
–
Inbox
Sentbox
Draft
• Push messages
55
Section 8: Changing Your Settings
This section explains the sound and phone settings for your phone. It includes such settings as: display, security,
memory, and any extra settings associated with your phone.
myFaves Settings
myFaves Settings displays only if you subscribe to this service. From this menu you can modify the myFaves
display, menu style, icons, refresh your contacts, or gather information About myFaves.
Sound Settings
You can customize various sound settings.
Incoming call
Note: When downloading MegaTones® or HiFi RingersTM, charges may apply.
Browse Mega Tones
Using the Browse MegaTones option on the sounds list, you can quickly access the T-Mobile website and
download new sounds by using the web browser.
1. From Idle mode, press Menu
➔
Settings
➔
Sound settings
➔
Incoming call
➔
Browse MegaTones.
2. Press the Connect soft key to purchase additional sound files.
Browse HiFi Ringers
Using the Browse HiFi Ringers option on the sounds list, you can quickly access the T-Mobile website and use the
web browser to download new HiFi Ringers.
1. From Idle mode, press Menu
➔
Settings
➔
Sound settings
➔
Incoming call
➔
Browse HiFi Ringers.
2. Press the Connect soft key to purchase additional ringtones.
Ringtone
This menu allows you to select a ring melody. Highlight Ringtone and press
. Use the Up or Down key to
highlight a ring tone or press the Left or Right key to select a file from either the Default Melodies, Voice list, or
Sounds folders. Press the Select soft key.
Changing Your Settings
56
Volume
This menu allows you to adjust the ring volume to one of 7 levels plus Silent mode and Vibration mode.
ᮣ
Use the Right or Left key to increase or decrease the volume.
Alert type
This menu allows you to specify how to inform you of incoming calls. Use the Right or Left key to select an Alert
type.
The following options are available:
– Melody: the phone rings using the ring melody selected in the Ringtone menu.
– Vibration: the phone vibrates but does not ring.
– Melody and vibration: the phone rings and vibrates simultaneously.
– Vibration then melody: the phone vibrates three times and then starts ringing.
– Melody then vibration: the phone rings using the ring melody selected in the Ringtone menu and then vibrates.
Message tone
This menu allows you to set up the ringer for incoming messages. You can set the Tone, Alert type, and Repetition.
ᮣ
Use the Up or Down Navigation keys to make your selections.
Keypad tone
This menu allows you to select a Beep or a Xylophone for your Keytone and to select the Volume (0-7) that the
phone sounds when you press a key.
ᮣ
Use the Up or Down Navigation keys to make your selections.
Tip: Use the Right or Left Navigation keys to adjust the volume.
Power-on/off tone
This menu allows you to select the melody that the phone sounds when it is switched on and off.
ᮣ
To turn off the sound, select Off.
Flip tone
This menu allows you to choose from four tones, or Off when opening or closing the phone.
ᮣ
Highlight Off or one of the tone selections and press Save.
57
Extra tones
You can customize additional tones for the phone.
1. To turn a tone on, press
. A check mark displays in front of the option. Press the Save soft key to save
the setting.
2. To turn a tone off, press
. The check mark no longer displays in front of the option. Press the Save soft
key to save the setting.
The following options are available:
–
Minute minder: sets whether or not the phone beeps every minute during an outgoing call to keep you informed of the
length of your call.
–
–
Connection tone: sets whether or not the phone beeps when your call is connected to the system.
Alerts on call: sets whether or not you receive tones when a message arrives while you are on a call.
Display Settings
In this menu, you can change various settings for the display or backlight.
ᮣ
From Idle mode, press Menu
➔
Settings
➔
Display Settings.
Wallpaper
This menu allows you to change the background image to display in Idle mode.
The following options are available:
•
•
•
•
Browse wallpapers: allows you to download additional wallpapers using the browser.
Default wallpapers: allows you to choose from a list of wallpapers included with your phone.
Photos: allows you to choose a photo from Photos folder.
Downloaded images: allows you to choose a photo from your downloaded images folder.
To change the background image:
1. Scroll through the list by pressing the Navigation keys.
2. Make a selection and press the Save soft key or
. Your wallpaper is updated.
Home screen
This option allows you to display the Calendar as a background wallpaper or select None
.
Changing Your Settings
58
Info display
This menu allows you to set text style (Outline, Shadow, or Normal) and text color (White, Yellow, Blue, Green, Red,
or Black).
1. Press the Left or Right Navigation keys to change the settings.
2. Press the Save soft key to apply your changes, or the Cancel soft key to cancel.
Dialing display
This menu allows you to select the size and color of your dialing font and the background color.
To change the size of the font:
1. Highlight the Font size option and press the Select soft key or
.
2. Use the Left or Right key to select between: Large, Medium, or Small.
3. Press the Save soft key or the
key to save your change. Otherwise, press the Cancel soft key.
To change the color of the font:
1. Highlight the Font color option and press the Select soft key or
.
2. Use the Left or Right key to select either Basic (black), Monochrome, or Gradation. If you select
Monochrome or Gradation you can select another option by using the Down Navigation key and then
scrolling through the available choices. Choose one of the 15 options.
3. Press the Save soft key or the
key to save your change. Otherwise, press the Cancel soft key or the
key.
To change the background color:
1. Highlight the Background color option and press the Select soft key or
.
2. Use the Left or Right key to select between 15 different colors (except None).
3. Press the Save soft key or the
key to save your change. Otherwise, press the Cancel soft key.
Greeting message
This menu allows you to set a greeting to display briefly when the phone is switched on.
59
Backlight
In this menu, you can select the length of time that the keypad backlight is on and how much longer the display
illuminates before going off.
Duration
The On setting is how long the keypad backlight is on. You can select 10 secs, 15 secs, 30 secs, 1 min, 3 mins,
or 10 mins.
The Dim option is how much longer after the keypad backlight goes off that the display remains lit. You can select
Off, 5 secs, 15 secs, 30 secs, 1 min, or 3 mins
.
For example, if you set On for 30 secs and Dim for 5 secs, after 30 seconds the backlight on the keys would turn
off and 5 seconds later the display light would turn off.
1. Press the Left or Right Navigation keys to change each field’s settings.
2. Press Save to save your changes, or Cancel to cancel.
Brightness
You can adjust the display brightness to see it better in different lighting conditions.
1. Press the Left or Right Navigation keys to change your settings.
2. Press the Save soft key to save your changes, or the Cancel soft key to cancel.
Phone Settings
You can customize various phone settings.
ᮣ
From Idle mode, touch Menu
➔
Settings ➔ Phone settings and press the Select soft key or
.
Time and Date
This menu allows you to change the current time and date displayed.
From Idle mode, touch Menu Settings Phone settings ➔ Time and date and press the Select soft key
or
The following options are available:
ᮣ
➔
➔
.
•
Time zone updating: allows you to receive time information from T-Mobile’s network.
– Automatic: the phone automatically updates the time and date according to the current time zone using the network service.
Changing Your Settings
60
– Manual only: you need to manually set the time and date according to the current time zone.
Time zone: allows you to select a time zone.
Daylight saving time: allows you to activate or deactivate daylight saving time.
Time: allows you to change the hour, minute, and am/pm.
Date: allows you to enter the month, day, and year.
Time format: allows you to select whether your time displays in either a 12 hour or 24 hour format.
Date format: allows you to select MM/DD/YYYY, DD/MM/YYYY, or YYYY/MM/DD format.
•
•
•
•
•
•
To change your time and date settings:
1. Use the Up or Down Navigation key to select the option you wish to change.
2. To set Time or set Date, use the Left or Right key to position the cursor over the number you wish to change.
3. Enter the desired number.
4. To change other options, use the Left or Right key to select the desired setting.
5. When you are finished changing your settings, press the Save soft key to save your settings. Otherwise press
the Cancel soft key.
Note: Automatic updates of time and date do not change the time you have set for alarm settings or calendar memos.
Language
This menu allows you to select a display language for Text language and Input mode. Choose from Automatic,
English, Français, and Español.
Airplane mode
Airplane Mode allows you to use many of your phone’s features, such as Games, Voice recorder, etc., when you are
in an airplane or in any other area where making or receiving calls or data is prohibited. When your phone is in
Airplane Mode, it cannot send or receive any calls or access online information.
1. To turn a feature on, highlight the Airplane mode option and press the Select soft key or
.
2. Highlight On and press the Save soft key.
61
HAC mode
Enabling HAC (Hearing Aid Compatibility) Mode adjusts the volume for HAC compliant devices used with this
handset.
Important!: Enabling the HAC mode can affect the quality of the phone (voice) conversation.
1. To turn a feature on, highlight HAC mode and press the Select soft key or the
key.
2. Highlight On and press the Save soft key.
Security
The Security feature enables you to restrict the use of your phone by others and to restrict the types of calls.
Various codes and passwords are used to protect the features of your phone.
Lock phone
When the Lock phone feature is enabled, the phone locks and you must enter the 4- to 8-digit phone password
each time the phone is switched on.
Once the correct password is entered, you can use the phone until you switch it off.
The following options are available:
–
Disable: you are not asked to enter the phone password when you switch on the phone.
–
Enable: you are required to enter the phone password when you switch on the phone.
Lock Applications
Using this menu, you can lock your applications which provide access to information such as call records, IM,
Messages, Files, Calendar and Tasks, and Phonebook. Once you have locked the contents, you must enter the
phone’s password to access the associated menus.
1. To select an item to lock, press the Up or Down Navigation key.
2. Press the
key to place a check mark on the selected item.
Select All applications to lock all of the contents.
Highlight the previously selected item and press the
•
•
key to remove a check mark.
Changing Your Settings
62
3. Press the Save soft key to lock the marked items.
4. Enter a password and press the OK soft key or the
key.
Change password
The Change password feature allows you to change your current phone password to a new one. You must enter the
current password before you can specify a new one.
Note: The current password is the password you created on initial use of a password feature.
Once you enter a new password, you are asked to confirm it by entering it again.
Note: If you change your password, be sure to write it down and keep it in a safe place. If you forget your password, your phone will
require service to have it unlocked.
Check PIN code
When the Check PIN code feature is enabled, you must enter your PIN each time you switch on the phone.
Consequently, any person who does not have your PIN cannot use your phone without your approval.
Note: Before enabling or disabling the PIN Check feature, you must enter your PIN.
The following options are available:
–
Disable: the phone connects directly to the network when you switch it on.
–
Enable: you must enter the PIN each time the phone is switched on.
Change PIN code
This feature allows you to change your current PIN, provided that the PIN check feature is enabled. You must enter
the current PIN before you can specify a new one.
Once you have entered a new PIN, you are asked to confirm it by entering it again.
63
Set FDN mode
FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict your outgoing calls to a limited
set of phone numbers.
The following options are available:
–
Disable: you can call any number.
–
Enable: you can only call phone numbers stored in Phonebook. You must enter your PIN2. You can obtain your PIN2 from
T-Mobile’s customer service.
Change PIN2 code
The Change PIN2 feature allows you to change your current PIN2 to a new one. You must first enter the current
PIN2 (obtained from T-Mobile) before you can specify a new one. Once you have entered a new PIN2, you are
asked to confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.
Reset
From this menu you can reset your phone and sound settings to the default settings.
The following options are available:
•
•
•
•
All: Phone, Display, and Sound are returned to default values.
Sound settings: only sound settings are returned to default values.
Display settings: only display settings are returned to default values.
Phone settings: only phone settings are returned to default values.
To reset your settings:
1. From Idle mode, touch Menu
➔
Settings ➔ Phone settings ➔ Security ➔ Reset. Your options display.
2. Press the Check soft key to select settings to reset.
3. When you have made your selection, press the Reset soft key.
Changing Your Settings
64
Memory Status
You can check the amount of the memory being used and the memory remaining for Shared memory, IM,
Messages, Files, Games, Organizer, and Phonebook.
The display shows the total space including the used and free space. You can also view how much space is
currently occupied by each message box.
Bluetooth
About Bluetooth
Bluetooth is a short-range wireless communications technology capable of exchanging information over a distance
of about 30 feet without requiring a physical connection.
Unlike infrared, you don't need to line up the devices to beam information with Bluetooth. If the devices are within a
range of one another, you can exchange information between them, even if they are located in different rooms.
The following Bluetooth options are available:
Turn Bluetooth On or Off
This option allows you to turn Bluetooth On or Off.
1. From Idle mode, press Menu
➔
Settings
➔
Bluetooth.
2. Make a selection and press the Select soft key or
.
My devices
This option allows you to search for new Bluetooth devices. Highlight the Search new device option and press the
Select soft key or
. The phone searches for available devices.
Features
Actually, the Bluetooth specification is a protocol that describes how the short-range wireless technology works,
whereas individual profiles describe the services supported by individual devices. Profiles reduce the chance that
different devices will not work together.
The following Service profiles are available:
–
Headset: The remote Bluetooth headset enables both outgoing and incoming calls.
–
Handsfree: The remote Bluetooth car kit enables both outgoing and incoming calls.
65
Help
This option takes you to the T-Mobile Help menu using the browser.
Call settings
1. From Idle mode, press Menu
➔
Settings
➔
Call settings and press the Select soft key or
.
The following options display:
Answer options
The Answer options menu allows you to select how your phone answers incoming calls.
1. From Idle mode, press Menu Settings Call settings Answer options and press the Select soft key
or
2. Press the key to make your selection. Press the Save soft key to save your new selection. Options include:
➔
➔
➔
.
• Send key: answers an incoming call by pressing either the Accept soft key or the
• Open flip: answers an incoming call by flipping open the phone.
key.
• Any key: answers an incoming call by pressing any key on your phone.
Auto redial
In this menu, you can automatically redial the last number if the call was either cut off or you were unable to
connect.
1. From Idle mode, press Menu
➔
Settings
➔
Call settings
➔
Auto redial and press the Select soft key or
.
2. Press to make your selection then press the Save soft key to save your new selection. Options include:
• Off: keeps the phone from automatically redialing the last number if the call was disconnected or the call was cut off.
• On: causes the phone to automatically redial the number.
Show my number
In the Show my number menu you can select how your ID is handled when an outgoing call is initiated.
1. From Idle mode, press Menu Settings Call settings Show my number and press the Select soft key
or
➔
➔
➔
.
Changing Your Settings
66
2. Highlight your selection and press
. Options include:
• Set by network: uses the default network information to identify you to the other party.
• Hide number: hides your identifying information to the other recipient.
• Show number: displays your identifying information to the other recipient.
3. Press Save to save your new selection.
Call forwarding
This network service enables incoming calls to re-route to a secondary number that you specify.
Example: You may wish to forward your business calls to a colleague while you are on holiday.
To set your call forwarding options:
1. From Idle mode, press Menu
or
➔
Settings
➔
Call settings
➔
Call forwarding and press the Select soft key
.
2. Select a call forwarding option and then press the Select soft key or
.
The following options are available:
• Always: all calls are forwarded until this feature is cancelled.
• If busy: calls are forwarded when you are already on another call.
• If no reply: calls are forwarded when you do not answer the phone.
• If out of reach: calls are forwarded when you are not in an area covered by T-Mobile or when your phone is switched off.
• Cancel all: all call forwarding options are canceled.
3. Highlight Voice calls or Data calls and then press the Select soft key
.
The current status displays. If the option was already set, the number to which the calls are forwarded
displays.
4. Use the Left or Right Navigation key to Activate call forwarding.
The Forward to field activates.
67
5. Enter the number in which to forward the calls in the Forward to text box and press the Select soft key
or
.
Tip: To enter an international code, press and hold
until the + sign displays.
6. To deactivate call forwarding, use the Left or Right Navigation key.
7. When you select If no reply in step 2, select the length of time the network waits for before forwarding a
call.
The phone sends your settings to the network and the network’s acknowledgement displays.
Call barring (SIM Card Dependent)
Call Barring allows you to restrict specific types of incoming and outgoing calls on your phone. This is useful if you
allow someone to use your phone for a short period of time.
Call waiting
This network service informs you when someone is trying to reach you during another call.
You can specify individual call waiting options for voice calls and/or data calls.
To set your call waiting options:
1. From Idle mode, press Menu
➔
Settings
➔
Call settings
➔
Call waiting and press the Select soft key or
.
2. Highlight Voice calls or Data calls and press the Select soft key or
.
The screen displays the current status.
3. Highlight Deactivate or Activate and press the Select soft key or
.
Call waiting is either activated or deactivated for that type of call.
Deactivating Call Waiting
1. From Idle mode, press Menu
➔
Settings
➔
Call settings
➔
Call waiting and press the Select soft key or
.
2. Highlight Cancel all and press the Select soft key or
.
All voice and Data calls are deactivated.
Changing Your Settings
68
Network selection
The Network Selection feature enables you to automatically or manually select the network used when roaming
outside of your home area.
Note: You can select a network other than your home network only if there is a valid roaming agreement between the two.
To change the Network Selection mode:
1. From Idle mode, press Menu
or
2. Highlight the Search now option and press the Select soft key or
➔
Settings
➔
Call settings
➔
Network selection and press the Select soft key
.
.
3. Highlight the network you want to use then press the Select soft key or
.
The phone scans for that network and, if available, you are connected.
To change your Default setup:
1. Highlight the Default setup option and press the Select soft key or
.
2. Highlight one of the following options and press the Select soft key or
:
• Automatic: you are connected to the first available network when roaming.
• Manual: the phone begins searching for available networks. Highlight the desired network and then press the Select soft key or
.
The phone scans the selected network and attempts to connect. If a connection is available, you are connected.
69
Self-help
A customer care (diagnostic) solution is provided on this handset. This solution allows your carrier to efficiently
solve subscriber service issues from a T-Mobile portal. To use this feature:
1. From the Idle menu, dial 611 then press
from the handset to diagnose.
Self-Help software immediately captures the call and displays a menu screen that displays frequently asked
questions, troubleshooting and other tips and tricks.
2. Using this portal, you can automatically configure your handset, using step-by-step instructions. You can
also make account inquiries and pay bills.
Note: For more information, please contact T-Mobile customer service.
Changing Your Settings
70
Section 9: Fun & Apps
This section outlines the various applications that are available on your phone.
Files
Files allows you to manage your sounds and images in one convenient location.
ᮣ
From Idle mode, press the Menu ➔ Fun & Apps ➔ Files and press the Select soft key or
.
Sounds
In this menu, you can view the list of sounds downloaded from the web server or received in picture messages. You
can set a downloaded sound as the current ring tone.
ᮣ
From Idle mode, press the Menu ➔ Fun & Apps ➔ Files ➔ Sounds and press the Select soft key or
.
Note: When downloading MegaTones® or HiFi RingersTM, charges may apply.
The following options are available:
Browse MegaTones
Using the Browse MegaTones option on the sounds list, you can quickly access the T-Mobile website and
download new sounds by using the web browser. Press the Select soft key to purchase additional MegaTones.
Browse HiFi Ringers
Using the Browse HiFi Ringers option on the sounds list, you can quickly access T-Mobile website and use the web
browser to download new HiFi Ringers. Press the Select soft key to purchase additional ringtones.
Sounds
Highlight an item in the Sounds menu and press the Options soft key. The following options are available:
•
•
•
•
•
•
Download new: opens your web browser where you can download new sounds.
Send via picture message: allows you to send the sound file via a Picture message.
Set as: allows you to set the sound as your myFaves ringtone, Ringtone, an Individual ringtone or an Alarm tone.
Delete: allows you to delete the selected sound or multiple sounds.
Rename: allows you to change the name of the sound.
Lock: allows you to lock the sound to protect it from deletion.
71
•
Properties: displays the sound name, date, format, length, size, and Lock/Unlock.
Voice list
The Voice list contains your recorded audio messages. Highlight an item and press the Options soft key. The
following options are available:
•
•
•
•
•
•
Send via picture message: allows you to send the audio message via a Picture message.
Set as: allows you to set the sound as your myFaves ringtone, Ringtone, an Individual ringtone or an Alarm tone.
Delete: allows you to delete the selected audio message or multiple audio messages.
Rename: allows you to change the name of the audio message.
Lock: allows you to lock the audio message to protect it from deletion.
Properties: displays the audio name, date, format, length, size, and Lock/Unlock.
Images
In this menu, you can view the list of images downloaded from the web server, taken with the built-in camera, or
received in messages. You can set an image as the current background image.
ᮣ
From Idle mode, press the Menu ➔ Fun & Apps ➔ Files ➔ Images and press the Select soft key or
.
The following options are available:
Browse Wallpapers
Using the Browse Wallpapers option, allows you to access the T-Mobile website and download new images using
the web browser.
ᮣ
From Idle mode, press the Menu ➔ Fun & Apps ➔ Files ➔ Images ➔ Browse Wallpapers and press the Select
soft key or
.
Note: When downloading Wallpapers, charges may apply.
Photos
ᮣ
From Idle mode, press the Menu ➔ Fun & Apps ➔ Files ➔ Images ➔ Photos and press the Select soft key
or
.
In this menu you can review the photos you’ve taken. Highlight a photo and press the Options soft key to choose
from the following options:
Fun & Apps
72
•
•
•
•
•
•
•
•
•
•
Send to My Album: allows you to send your photos to My Album.
Send via picture message: allows you to send an image as a picture message.
Set as: allows you to set the photo as your myFaves icon, Wallpaper or as a Picture ID.
Delete: allows you to delete the selected photo or multiple photos.
Default destination: allows you to Change or Remove the default destination where your photos are sent after you take them.
Rename: allows you to rename the photo.
Display mode: allows you to view the photos in Line view or Thumbnail view.
Slide show: allows you to set the time for the slide show to cycle through the images. Choose 1 second or 3 seconds.
Lock: allows you to lock the photo to protect it from deletion.
Properties: displays the image name, date, format, resolution, size, quality and Lock/Unlock.
My Album
My Album is a private online picture album that you can use to store and share pictures, videos, voice messages,
Use the following procedures to access My Album.
Note: When accessing My Album, charges may apply.
1. From Idle mode, press the Menu
or
2. In your browser, select the Inbox Album link and press the Select soft key or
3. Highlight a particular image and press to view the photos.
4. Press to exit the browser and return to the Idle screen.
➔
Fun & Apps
➔
Files
➔
Images
➔
My Album and press the Select soft key
.
.
Downloaded images
This menu allows you to access your downloaded images.
1. From Idle mode, press the Menu
soft key or
➔
Fun & Apps
➔
Files
➔
Images
➔
Downloaded images and press the Select
.
2. Scroll to the image you want to view. By pressing the Options soft key you can access the following options:
• Download new: opens your web browser where you can download new images.
73
• Send via picture message: allows you to send an image via a Picture message.
• Set as: allows you to set the image as Wallpaper or as a Picture ID.
• Delete: allows you to delete the selected image or multiple images.
• Rename: allows you to change the name of the image.
• Display mode: allows you to set the display mode to Line view or Thumbnail view.
• Slide show: allows you to set the time for the slide show to cycle through the images. Choose 1 second or 3 seconds.
• Lock: allows you to lock the image to protect it from deletion.
• Properties: displays the image name, date, format, resolution, size, quality, and Lock/Unlock.
Icons
This menu allows you to personalize your favorite numbers with downloadable icon types.
1. From Idle mode, press the Menu Fun & Apps Files Icons and press the Select soft key or
2. Select one of the following options:
➔
➔
➔
.
• Browse myFaves Icons navigates to the browser so you can download additional myFaves icon types.
• myFaves icons displays a list of downloaded icon types for you to use.
Memory Status
You can check the amount of memory being used and memory remaining for sounds and images.
From Idle mode, press the Menu Fun & Apps Files Memory status and press the Select soft key or
Games
ᮣ
➔
➔
➔
.
You can download MIDlets (Java applications that run on mobile phones) from various sources using the browser
and then storing them in your phone.
ᮣ
From Idle mode, press Menu ➔ Fun & Apps ➔ Games and press the Select soft key or
.
When you access the Games menu, the list of default games displays. Once you have downloaded new games,
they are then added to the list.
Browse Games
You can download more games from the T-Mobile website by using the Browse Games option.
1. Highlight Browse Games and press the Connect soft key or
.
Fun & Apps
74
Note: When downloading games, charges may apply. MIDlet game options differ depending on the MIDlet you select.
My Games
1. Highlight My Games and press
.
2. In the My Games folder, scroll to the MIDlet application you want and press the Options soft key.
The following options are available:
• Move to: allows you to move a MIDlet to another folder.
• Delete: allows you to delete a MIDlet.
• Lock/Unlock: allows you to prevent/allow deletion of the game.
• Properties: displays information about the MIDlet, such as Version, Size, Authorized, and Vendor.
• Memory status: Shows you how much memory is left for your games.
3. Press the Back soft key or
to exit and return to the Games list.
4. Press
to begin playing the game.
Camera
Voice Recorder
In this menu, you can record an audio file up to one minute long and then immediately send it as a message.
1. From Idle mode, press Menu ➔ Fun & Apps ➔ Voice recorder and press the Select soft key or
2. Press Record and speak into the microphone.
.
3. Press Stop when you finish recording.
Note: The recording automatically saves to the voice list.
4. Press Options and select one of the following options:
• Send in Message: allows you to send this voice recording in a message.
• Re-record: allows you to re-record the audio note.
• Set as: allows you to save this recording as a myFaves ringtone, Ringtone, Individual ringtone, or Alarm tone.
75
• Go to voice list: displays the voice list.
• Delete: allows you to delete this voice recording.
Organizer
TheOrganizerallowsyoutosetalarms,scheduleappointments,viewthecalendar,createtasks,performsimplemath
calculations, check world time, perform unit conversions, set a timer, and use a stopwatch.
1. From Idle mode, press Menu ➔ Fun & Apps ➔ Organizer and press the Select soft key or
.
Alarm
This feature allows you to:
•
Set up to 3 alarms to ring at specified times.
From Idle mode, press Menu ➔ Fun & Apps ➔ Organizer ➔ Alarm and press the Select soft key or
ᮣ
.
The following options are available:
–
–
–
Alarm1: set the day, time, and tone for this alarm.
Alarm2: set the day, time, and tone for this alarm.
Alarm3: set the day, time, and tone for this alarm.
To set the alarm:
1. After selecting an alarm, highlight the Alarm option and press the Right navigation key to set Alarm to On.
2. Press the Down key to highlight the Alarm time option. Enter the time you want the Alarm to sound.
3. Press the Down key to highlight the Sunday-Saturday checkboxes. Press
to display a list of days.
4. Place a checkmark next to the days you want the alarm to sound. To place or remove a check mark, press
. Press the OK soft key.
5. Press the Down key to highlight the Alarm tone option. Press
to bring up a list of alarm melodies.
6. Press the Up or Down Navigation key to highlight a default alarm melody. Or, press the Left or Right
navigation key to display a list of sounds that you may choose from.
7. Press the Select soft key once you have selected an alarm tone.
8. Press the Save soft key.
9. To stop the alarm when it rings, press any key or press the Snooze soft key.
Fun & Apps
76
Note: The Snooze alarm rings every five minutes until it is turned off.
10. Press
to return to Idle mode.
Note: Your phone is preset to a 12-hour format. To change the time format, see “Time and Date” on page 60.
Calendar
With the Calendar feature, you can:
•
•
Consult the calendar by month, week, or day.
Set schedules and note anniversaries.
Create a miscellaneous event.
•
•
Set an alarm to act as a reminder, if necessary.
Check your memory status.
•
ᮣ
From Idle mode, press Menu ➔ Fun & Apps ➔ Organizer ➔ Calendar and press the Select soft key or
.
When you select the Calendar menu, the following options are available:
Month view
When you select this option, the calendar displays the selected month with today’s date highlighted.
At the bottom of the calendar, the following icons are displayed along with the number of entries for each:
Schedule items
Anniversary events
Miscellaneous items
Task items
The number of entries next to each icon reflects the number of entries for the selected day on the calendar.
The following options are available when you press the Options soft key:
–
–
–
View mode: takes you to the Day view or Week view of the selected day.
Create new: allows you to create a Schedule, Anniversary, Miscellaneous, or Task.
Go to: takes you to the Today’s date or another date.
77
–
Delete: allows you to delete all events for a selected date, delete all events for a specified period, or delete all events for this
month dates. You can also delete all events.
Week view
When you select this option, the calendar displays the selected week with today’s date and time highlighted. The
following options are available when you press the Options soft key:
–
–
–
–
View mode: takes you to the Day view or Month view of the selected day.
Create new: allows you to create a Schedule, Anniversary, Miscellaneous, or Task.
Go to: takes you to today’s date or another date.
Delete: allows you to delete all events for a selected date, delete all events for a specified period, or delete all events for this
weeks dates. You can also delete all events.
Day view
When you select this option, you are taken to the Day view of today's date with with any events listed. The
following options are available when you press the Options soft key:
–
Create new: allows you to create a Schedule, Anniversary, Miscellaneous, or Task.
–
View mode: allows you to choose between Month view or Week view.
Schedule
This option allows you to write memos to a schedule.
1. From Idle mode, press Menu ➔ Fun & Apps ➔ Organizer ➔ Calendar ➔ Schedule and press the Select soft
key or
.
2. Press the Options ➔ Create new and press the Select soft key or
.
3. Enter the subject in the Subject text box then press the Down soft key.
4. Continue to enter other information including Details, Start date, Start time, AM/PM, End date, End time,
AM/PM, Location, Alarm, before, Repeat and until.
5. Press
when you are finished.
Your Schedule information saves to the Calendar.
Fun & Apps
78
Anniversary
This option allows you to record Anniversaries in your calendar. You can also set an alarm to remind you of important
anniversaries.
1. From Idle mode, press Menu ➔ Fun & Apps ➔ Organizer ➔ Calendar ➔ Anniversary and press the Select
soft key or
.
2. Press the Options ➔ Create new option and press the Select soft key or
.
3. Enter the occasion in the Occasion text box then press the Down soft key.
4. Continue to enter other information including Date, Alarm, before, Alarm time, AM/PM, and Repeat every year.
5. Press when you are finished.
Your Anniversary information saves to the Calendar.
Miscellaneous
This option allows you to record miscellaneous dates or events in your calendar.
1. From Idle mode, press Menu ➔ Fun & Apps ➔ Organizer ➔ Calendar ➔ Miscellaneous and press the
Select soft key or
.
2. Press Options ➔ Create new and press the Select soft key or
.
3. Enter the subject in the Subject text box then press the Down soft key.
4. Continue to enter other information in these fields: Details, Start date, Start time, AM/PM, End date, End time,
Alarm, before and AM/PM.
5. Press
Your Miscellaneous information saves to the Calendar.
6. Press to return to Idle mode.
when you are finished.
79
Missed alarm events
You can check on all of the events that you have set an alarm on.
1. From Idle mode, press Menu ➔ Fun & Apps ➔ Organizer ➔ Calendar ➔ Missed alarm events and press
the Select soft key or
.
2. To view an event information, highlight an event and press
.
The missed alarm event information displays.
3. To acknowledge and remove the event, press the Confirm soft key or
. The event is removed from the
Missed alarm events menu.
Memory status
This menu item shows the number of calendar events you presently have and how many more you memory space
for. It breaks down your events by Schedule, Anniversary, and Miscellaneous.
Tasks
This feature allows you to enter a list of tasks.
1. From Idle mode, press Menu ➔ Fun & Apps ➔ Organizer ➔ Tasks and press the Select soft key or
2. Press to create a new task.
.
3. Enter the Task item in the Task text box then press the Down soft key.
4. Continue to enter other information including Start date, Due date, Priority, Alarm, before, Alarm time, and
AM/PM.
5. Press
when you are finished.
Your Task list saves to the Calendar.
Editing the Tasks List
When you select the Tasks list menu, the current contents display with a status checkbox and a priority marker.
A check displays in the checkbox if the item is marked as done.
High priority items have a yellow outter ring, orange middle ring and red inner circle; Normal priority items have a
yellow outter ring and orange middle ring; and Low priority items have a yellow outter ring.
Fun & Apps
80
1. In the Tasks list, to mark an item as Done, press Options ➔ Mark as Done.
The status checkbox next to the Task item displays a check mark.
2. To edit an item, highlight the item in the Task list and press the View soft key or
.
3. Highlight the item you wish to edit and press the Edit soft key or
.
4. Edit the items you wish to change and press the Save soft key or
.
Calculator
With this feature, you can use the phone as a calculator. The calculator provides the basic arithmetic functions;
addition, subtraction, multiplication, and division.
1. From Idle mode, press Menu ➔ Fun & Apps ➔ Organizer ➔ Calculator and press the Select soft key
or
.
2. Enter the first number using the numeric keys.
3. Enter the operation for your calculation by pressing the Navigation key that corresponds to the operation (for
example, multiply, add, divide, or subtract) according to the illustration on the display. The
key is used
for the decimal. The
– or –
POUND key creates brackets.
4. Press the Options soft key and select one of the operations (such as cosine) and press the Select soft key.
5. Enter the next number.
6. Press
to view the result.
7. Repeat steps 1 to 4 as many times as required.
Tip calculator
This feature provides the percentage amount for tip. Use the following procedures to calculate a tip amount.
1. From Idle mode, press Menu ➔ Fun & Apps ➔ Organizer ➔ Tip calculator and press the Select soft key
or
.
2. In the Bill field, enter the check amount.
81
Note: Press
to enter the decimal point for the exact dollar amount.
3. Use the Down Navigation key to highlight Tip(%) percentage. 15 is the default value but this can be
changed.
4. The Tip($) field value is calculated according to the values entered.
5. Use the Down Navigation key to move to the # paying field to change the number of people contributing to
the tip amount.
6. The You pay field displays what each individual is to pay.
World Time
This feature allows you to assign two separate time zones to your phone by using the Left and Right Navigation
keys. You can set the first setting to your home city and then use the second setting to check other city times.
1. From Idle mode, press Menu ➔ Fun & Apps ➔ Organizer ➔ World Time and press the Select soft key
or
.
2. Highlight the first field using your Up and Down Navigation keys.
3. Use your Left and Right Navigation keys to then assign the time zone for that time zone.
4. Repeat steps 1 & 2 for the next time zone entry.
5. Highlight the time zone in which to apply daylight saving time, and press the Set DST soft key.
6. Press the Back soft key to exit the World time feature.
Fun & Apps
82
Unit Conversion
The conversion menu provides the following conversion categories:
–
–
–
–
–
–
Currency
Length
Weight
Volume
Area
Temperature
To convert a currency, length, weight, volume, area, or temperature, do the following:
1. From Idle mode, press Menu ➔ Fun & Apps ➔ Organizer ➔ Unit conversion and press the Select soft key
or
.
2. Highlight the conversion feature you wish to use and press the Select soft key or
.
3. Enter the quantity you want converted.
Tip: Press the
key to include a decimal point.
4. Use the Navigation keys to select the From and To units of measure for the quantity you want converted.
Tip: If applicable, press the key to include a negative symbol.
5. Press the Back soft key to return to the Unit conversion menu.
Timer
You can use this menu to set a timer. To enable the Timer, use the following options:
1. From Idle mode, press Menu ➔ Fun & Apps ➔ Organizer ➔ Timer and press the Select soft key
or
.
2. Press the Set soft key to enter the length of time.
3. Enter the time and press the OK soft key.
4. Press the
key to start the timer. Press
again to stop the timer.
83
Stopwatch
This feature allows you to use a stopwatch.
1. From Idle mode, press Menu ➔ Fun & Apps ➔ Organizer ➔ Stopwatch and press the Select soft key
or
.
2. Press
to start the stopwatch.
3. Press the Reset soft key to erase all previously recorded stopwatch times.
4. Press for the lap time.
You can have up to 4 lap times.
Fun & Apps
84
Section 10: Camera
This section explains how to use the camera on your phone. You can take photographs by using the built-in camera
functionality.
Using the Camera
Using the camera module in your phone, you can take photos of people or events while on the move. Additionally,
you can send these photos to other people in a Picture Messaging message or set a wallpaper or Picture ID image.
Note: Do not take photos of people without their permission.
Do not take photos in places where cameras are not allowed.
Do not take photos in places where you may interfere with another person’s privacy.
Take and Send
Your camera produces photos in JPEG format.
Note: When you take a photo in direct sunlight or in bright conditions, shadows may appear on the photo.
1. From Idle mode, press the Menu ➔ Fun & Apps ➔ Camera
or
➔
Take and Send and press the Select soft key
.
Tip: Press the Camera key on the right side of the phone to access the camera module. The phone must be open when you press the
camera button.
2. Adjust the image by aiming the camera at the subject.
3. Press the Menu soft key to access the camera options. For details, see “Configuring Camera Options” on
Note: You can use the keypad to quickly change the camera options.
4. Press the Camera key or
to take the photo. Send to: My Album Online? displays.
85
5. Press the Yes soft key if you want to send the photo to your T-Mobile My Album Online service. The phone’s
default destination is set to My Album Online. The photo is automatically saved to the Photos folder in the
phone.
Note: To change the default destination for your pictures, press the Options soft key when Send to: My Album? displays on the
screen. Highlight the Default destination ➔ Change, then change your default destination to Recent recipients, Phonebook,
Phone number, Email address, or My Album Online.
6. To send the newly taken photograph, press the Options soft key, select the Send to option and press the
Select soft key or
.
7. Select from one of the following destinations by pressing the Up or Down Navigation key:
• Recent recipients: allows you to send to one of the recent recipients.
• Phonebook: allows you to select a recipient from the phonebook.
• New Recipient: allows you to enter the phone number or email address of a new recipient.
• My Album: sends the message to My Album.
8. To return to Capture mode, press the Options soft key and select Take another then press the Select soft
key or
.
9. Press
to return to Idle mode.
Configuring Picture Options
After you have taken a picture, press the left soft key to access the photo’s Options menu for the current
photograph. This list of options differ from the Camera’s main menu which allows you to configure options for the
camera and not for the picture.
The following options are available:
•
•
Take another: allows you to return to camera mode to take another photo.
Send to: displays the Send to menu and allows you to select a destination for the currently taken photograph. This destination
can be a single or multiple recipient(s) (such as, Recent recipients, Phonebook, or New recipient) or to a remote folder such as
My Album.
•
Send in Message: allows you to send the newly taken photo as a picture message.
Camera
86
•
Default destination: allows you to Remove a current destination location or Change the current location by establishing a new
folder in which to place the pictures. Select from the following options: Recent recipients, Phonebook, Phone number, Email
address or My Album Online.
•
•
•
Set as: allows you to use the current photo as a myFaves icon, Wallpaper or Picture ID.
Go to Photos: takes you to your Photos folder.
Delete: allows you to delete the selected photo.
Note: To change the default destination for your pictures, highlight the Default destination option, then select Change.
1. To return to the Capture mode, press the Back soft key.
2. Press
to return to the Idle mode.
Configuring Camera Options
In Capture mode, you can use various options for the camera module by pressing the Menu soft key.
The following options are available:
•
Shooting Mode: allows you to assign what sequence is followed when a photograph is taken.
• Single shot: takes a single photo and allows you view it before returning to the shooting mode.
Size: sets the image size to 640x480, 320x240, 128x160, or 128x96.
•
•
Timer: allows you to set a time delay before the camera takes the photo. Select the length of delay you want (Off, 3 seconds, 5
seconds or 10 seconds). When you press the Camera button or
elapsed.
, the camera takes the photo after the specified time has
•
•
White balance: allows you to set this option from the following choices: Auto, Daylight, Incandescent, Fluorescent, or Cloudy.
Effects: allows you to change the color tone or apply special effects to the photo.
•
Options include: No Effects, Black & White, Negative, Sepia, Emboss, Sketch, and Antique.
•
•
•
Set default destination: allows you to Remove a current destination location or Change the current location by establishing a
new folder in which to place the pictures.
Camera shortcuts: allows you to view a quick list of shortcuts such as 2-change the photo size, 3-setting a delay timer, or #
setting the view finder.
Settings:
87
• General settings: There are two types of general settings: Zoom sound (creates a sound when you zoom the camera) and
Brightness sound (creates a sound when you adjust the brightness). You can activate (turn On) or deactivate (turn Off) these
sounds.
• Camera settings: consist of the following:
–
Shutter sound: allows you to select a tone to play when the camera’s shutter opens and closes. Sound selections are Shutter1,
Shutter2, and Shutter3.
–
–
–
–
Viewfinder mode: allows you to set the view finder to Full screen, Full screen & Indicator, Full screen & Guideline, or Actual screen.
Scene program: allows you to set the camera options to capture normal or night scene.
Exposure metering: allows you to set how the camera measures or meters the light source: Normal, or Center-weighted, or Spot.
Single shot: allows you to select whether you want the single shot option set to Take and Send or Take and Preview.
•
Camera Shortcuts: shows you how to change options using your keypad in capture mode. The following short cuts are
available:
Up and Down navigation keys zoom in and out.
Left and Right navigation keys adjust the image brightness.
Up Vol
zooms in on the object.
Down Vol zooms out to display the entire object.
set the image size to 640x480, 320x240, 128x160, or 128x96.
sets a delay timer.
sets the view finder.
Photos
1. From Idle mode, press the Menu ➔ Fun & Apps ➔ Camera ➔ Photos and press the Select soft key
or
When you access this menu, your phone displays the photos in Thumbnail view, which shows them as small
.
Camera
88
images. Use the Navigation keys to scroll through the photos.
2. Press to view the photos on the full screen. Press the Back soft key or
Thumbnail view.
to redisplay Line view or
3. Press the Options soft key to use the following options:
• Send to My Album: allows you to send your photos to My Album.
• Send via picture message: allows you to send the selected photo as a Picture message.
• Set as: allows you to set the photo as a myFaves icon, Wallpaper or as a Picture ID.
• Delete: allows you to delete the selected or multiple photos.
• Default destination: allows you to Change or Remove where your photos are sent after you take them.
• Rename: allows you to rename the photo.
• Display mode: allows you to view the pictures in Line view or Thumbnail view
.
• Slide Show: allows you to see all of your photos in a slide show presentation. Choose from 1 or 3 seconds intervals.
• Lock/Unlock: allows you to lock the selected photo to protect it from deletion, or unlock the photo to allow deletion.
• Properties: shows the properties of the photo, such as the file Name, Date, Format, Resolution, Size, Quality, and Protection.
Deleting a Photo
You can delete photos one by one or all at one time.
1. From the Photos menu, highlight the photo you want to delete. Press the Options soft key and select Delete
and press the Right Navigation key.
2. Select a deletion of either the currently Selected image or Multiple images and press the Select soft key
or
.
3. Press the Yes soft key to confirm the deletion.
4. Press
when you finish.
My Album
My Album is a private online picture album that you can use to store and share pictures, videos, voice messages,
and text.
Use the following procedures to access My Album.
89
Note: When accessing My Album, charges may apply. The feature is not activated until you send your first image to the remote My
Album location.
1. From Idle mode, press the Menu ➔ Fun & Apps ➔ Camera ➔ My Album and press the Select soft key or
.
The browser launches and the T-Mobile Web page displays.
2. Scroll down to the My Album link and press the Select soft key or
.
3. Select the My Albums Menu link and press the Select soft key or
.
4. Photos sent to this folder are stored in the Inbox Album. Press the Select soft key to view the photos.
5. Press to exit the browser and return to the Idle screen.
Camera
90
Section 11: web2go Browsing
This section outlines the browsing features available on your phone. For more information, contact T-Mobile.
web2go
Your phone is equipped with a browser that provides wireless access and navigation to the Web using your phone.
To access the browser via the menu, follow these steps:
ᮣ
From Idle mode, press the Menu ➔ web2go and press the Select soft key or
.
The following options are available:
Home
Selecting this menu connects the phone to the network and loads the browser homepage.
The content of the startup homepage can vary. To scroll through the screen, use the Up and Down keys.
To go to the startup homepage from any other screen in the browser, use the Home option. For more information on
Exiting the Browser
ᮣ
To exit the browser at any time, simply press
.
Navigating the Browser
1. To scroll through browser items, press the Up or Down Navigation key.
2. To select browser items, press
3. To return to the previous page, press the Back soft key or
.
.
4. To return to the startup homepage, press the Options soft key and Go to
➔
Homepage.
Entering Text in web2go
When you are prompted to enter text, the currently active text input mode is indicated on the screen. The following
modes are available:
•
•
Upper-case character mode (ABC): allows you to enter upper-case English characters.
Lower-case character mode (abc): allows you to enter lower-case English characters.
For more information, refer to “Using ABC Mode” on page 30.
91
Tip: Press
to enter symbols in upper-case or lower-case character mode.
•
Number mode (1): allows you to enter numbers.
To change the text input mode, use the following procedures:
1. Press the Right soft key one or more times.
2. Press
3. To edit text, set the cursor to the right of the character(s) to correct.
4. Press as required.
to enter a space.
5. Enter the correct character(s).
Selecting and Using Menu Options
To access the browser options menu:
1. Press the Options soft key.
Note: The menus may vary.
The following options are available:
–
–
–
–
–
–
–
–
Reload: reloads the current page.
Page size: allows you to select the page size to view (Large, Normal or Small).
Go to: navigates to the URL address, Homepage, Bookmarks, or History.
Save image: allows you to save the selected Image (outlined in blue).
Add bookmark: displays the Add bookmark screen so you can enter a new bookmark.
Send URL via message: sends the currently viewed URL to a recipient as a message.
Page details: allows you to view details about the current page such as: Title, URL, Mimetype, and Size.
Browser settings:Various settings are available when you are using the browser to navigate the web such as:
• Clear cache: clearing information stored in the cache.
• Cookies: Cookie mode allows you to define how your browser handles cookies. Options are: Accept all, Reject all, or Prompt
before receiving a cookie. The Delete cookies option allows you to delete all the cookies to provide security.
• Preferences: allows you to set preferences for the browser, such as Display images, Play sound, View mode, and Revalidate
cache.
web2go Browsing
92
• Certificates: allows you to view internet certificates.
-
-
Root Certificates: provides several root certificates from which to choose.
CA Certificates: provides several CA certificates from which to choose.
• About browser: About Browser displays information about the browser such as the type and version.
Enter URL
This menu allows you to manually enter the URL address of a web site that you wish to access.
Bookmarks
This menu stores up to 15 URL addresses.
To store a URL address:
1. Press Options ➔ Add bookmark and press the Select soft key or
2. Enter a name for the favorite item in the Title field and press the Down key.
3. Enter the address in the URL field and press Save
.
.
After saving the bookmark, you can access the following options by highlighting the item, then pressing the Options
soft key:
–
–
–
–
Edit bookmark: allows you to edit the address.
Delete: allows you to delete the selected address or multiple addresses.
Add bookmark: displays the Add bookmark screen so you can enter a new bookmark.
Send URL via message: sends the selected URL to a recipient as a message.
Or, you can select the favorite item and press
. Your browser displays the site.
History
This option provides you with a list of the most recently visited web sites. You can use these entries to return to
previously visited, but not bookmarked, web pages.
Browser Settings
Various settings are available when you are using the browser to navigate the wireless web.
93
Clear cache
You can clear the information stored in the cache, which is the phone’s temporary memory and stores the most
recently accessed Web pages.
ᮣ
Press the Yes soft key to confirm the deletion. Otherwise, press the No soft key.
Cookies
The Cookie mode allows you to define how your browser handles cookies.
Cookie mode
Cookie mode allows you to Accept all cookies, Reject all cookies, or Prompt you when a site wants to deposit a
cookie.
Delete Cookies
Cookies identify who you are when you visit favorite web sites; however, they are also used to track your web
surfing habits. Deleting all the cookies provides security.
1. Highlight Delete cookies and press the Select soft key or
2. At the Delete cookies? prompt press Yes
.
.
Preferences
The Preferences option allows you to set preferences such as Display images, Play sound, View mode, and
Revalidate Cache.
Certificates
The Certificates option allows you to view internet certificates.
•
•
Root Certificate: provides several root certificates from which to choose.
CA Certificate: provides several CA certificates from which to choose.
About browser
About Browser displays information about the browser such as the type and version.
web2go Browsing
94
Section 12: Health and Safety Information
This section outlines the safety precautions associated with using your phone. These safety precautions should be
followed to safely use your phone.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure
limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the recommendations of two expert organizations, the National Counsel
on Radiation Protection and Measurement (NCRP) and the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific and engineering experts drawn from industry,
government, and academia after extensive reviews of the scientific literature related to the biological effects of RF
energy.
The exposure limit set by the FCC for wireless mobile phones employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of absorption of RF energy by the human body expressed in
units of watts per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit of 1.6 watts per
kilogram (1.6 W/kg).
The FCC exposure limit incorporates a substantial margin of safety to give additional protection to the public and to
account for any variations in measurements.
SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its
highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it must be tested and certified to the FCC that it does
not exceed the exposure limit established by the FCC. Tests for each model phone are performed in positions and
locations (e.g. at the ear and worn on the body) as required by the FCC.
95
For body worn operation, this phone has been tested and meets FCC RF exposure guidelines when used with an
accessory that contains no metal and that positions the handset a minimum of 1.5 cm from the body.
Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. The maximum SAR values for this model phone as reported to
the FCC are:
•
•
Head: 0.599 W/Kg.
Body-worn: 1.04 W/Kg.
SAR information on this and other model phones can be viewed online at http://www.fcc.gov/oet/ea. To find
information that pertains to a particular model phone, this site uses the phone FCC ID number which is usually
printed somewhere on the case of the phone.
Sometimes it may be necessary to remove the battery pack to find the number. Once you have the FCC ID number
for a particular phone, follow the instructions on the website and it should provide values for typical or maximum
SAR for a particular phone. Additional product specific SAR information can also be obtained at www.fcc.gov/cgb/sar.
Warning Regarding Display
The display on your handset is made of glass or acrylic and could break if your handset is dropped or if it receives
significant impact. Do not use if screen is broken or cracked as this could cause injury to you.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Go to: https://fun.samsungmobileusa.com/recycling/index.jsp or 1-800-822-8837 for more information.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety requirements. Please adhere to the following safety
instructions per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE
PROPERTY DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
Health and Safety Information
96
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A
VERTICAL OR HORIZONTAL OR FLOOR MOUNT POSITION.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a series of Questions and Answers for consumers
relating to radio frequency (RF) exposure from wireless phones. The FDA publication includes the following
information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called "cell,"
"mobile," or "PCS" phones. These types of wireless phones can expose the user to measurable radio frequency
energy (RF) because of the short distance between the phone and the user's head. These RF exposures are limited
by Federal Communications Commission safety guidelines that were developed with the advice of FDA and other
federal health and safety agencies.
When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a
person's RF exposure decreases rapidly with increasing distance from the source. The so-called "cordless phones,"
which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels,
and thus produce RF exposures well within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are associated with using wireless
phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in
the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level
RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies have suggested that some biological effects may
occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had
difficulty in reproducing those studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones
before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take
action if wireless phones are shown to emit radio frequency energy (RF) at a level that is hazardous to the user. In
97
such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to
repair, replace or recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the following:
•
•
•
Support needed research into possible biological effects of RF of the type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and
Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use
on human health.
FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects
of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:
•
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All
phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies
on FDA and other health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate
at higher power than do the wireless phones themselves, the RF exposures that people get from these base
stations are typically thousands of times lower than those they can get from wireless phones.
Base stations are thus not the primary subject of the safety questions discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have suffered from flaws in their
research methods. Animal experiments investigating the effects of radio frequency energy (RF) exposures
characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other
laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of the studies that showed increased tumor
Health and Safety Information
98
development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to
be pre-disposed to develop cancer in absence of RF exposure. Other studies exposed the animals to RF for up to 22
hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we
don't know with certainty what the results of such studies mean for human health.
Three large epidemiology studies have been published since December 2000. Between them, the studies
investigated any possible association between the use of wireless phones and primary brain cancer, glioma,
meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the
studies demonstrated the existence of any harmful health effects from wireless phones RF exposures.
However, none of the studies can answer questions about long-term exposures, since the average period of phone
use in these studies was around three years.
What research is needed to decide whether RF exposure from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people actually using wireless phones would
provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years.
However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if
one exists. Epidemiological studies can provide data that is directly applicable to human populations, but ten or
more years' follow-up may be needed to provide answers about some health effects, such as cancer.
This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop -
if they do - may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in
measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which model of phone is used.
What is FDA doing to find out more about the possible health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to
ensure that high priority animal studies are conducted to address important questions about the effects of exposure
to radio frequency energy (RF).
FDA has been a leading participant in the World Health Organization international Electromagnetic Fields (EMF)
Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda
of research needs that has driven the establishment of new research programs around the world. The Project has
also helped develop a series of public information documents on EMF issues.
99
FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and
Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight,
obtaining input from experts in government, industry, and academic organizations.
CTIA-funded research is conducted through contracts to independent investigators. The initial research will include
both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of
additional research needs in the context of the latest research developments around the world.
What steps can I take to reduce my exposure to radio frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not know that there is - it is probably very small. But
if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone will reduce RF exposure.
•
If you must conduct extended conversations by wireless phone every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset
and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the
RF exposure from these products, you can use measures like those described above to reduce your RF exposure
from wireless phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If
you want to take steps to lower exposure to radio frequency energy (RF), the measures described above would
apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing
the distance between the user and the RF source will reduce RF exposure.
Some groups sponsored by other national governments have advised that children be discouraged from using
wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a
recommendation in December 2000.
They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific
evidence that any health hazard exists.
Health and Safety Information
100
Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe
that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort.
These systems reduce the absorption of RF energy in the head because the phone, which is the source of the RF
emissions, will not be placed against the head. On the other hand, if the phone is mounted against the waist or other
part of the body during use, then that part of the body will absorb more RF energy. Wireless phones marketed in the
U.S. are required to meet safety requirements regardless of whether they are used against the head or against the
body. Either configuration should result in compliance with the safety limit.
Do wireless phone accessories that claim to shield the head from RF radiation work?
Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe
that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield
the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory
attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike "hand-
free" kits, these so-called "shields" may interfere with proper operation of the phone. The phone may be forced to
boost its power to compensate, leading to an increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that claimed to protect wireless phone users from
radiation with making false and unsubstantiated claims.
According to FTC, these defendants lacked a reasonable basis to substantiate their claim.
What about wireless phone interference with medical equipment?
Radio frequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA
helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by
the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by FDA,
medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow
manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. FDA has
tested wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and
Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids
and wireless phones so that no interference occurs when a person uses a compatible phone and a compatible
hearing aid at the same time. This standard was approved by the IEEE in 2000.
101
FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should
harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the
problem.
Additional information on the safety of RF exposures from various sources can be obtained from the following
organizations (Updated 12/1/2006):
•
•
•
•
•
•
•
•
FCC RF Safety Program:
Environmental Protection Agency (EPA):
Occupational Safety and Health Administration's (OSHA):
National Institute for Occupational Safety and Health (NIOSH):
World Health Organization (WHO):
International Commission on Non-Ionizing Radiation Protection:
Health Protection Agency:
US Food and Drug Administration:
Road Safety
Your wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car,
practice good common sense and remember the following tips:
1. Get to know your wireless phone and its features, such as speed dial and redial. If available, these features
help you to place your call without taking your attention off the road.
2. When available, use a hands-free device. If possible, add an additional layer of convenience and safety to
your wireless phone with one of the many hands free accessories available today.
Health and Safety Information
102
3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your
eyes from the road. If you get an incoming call at an inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice and even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while driving. Jotting down a "to do" list or flipping through your
address book takes attention away from your primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a
few numbers, check the road and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking
with aware you are driving and suspend conversations that have the potential to divert your attention from the
road.
8. Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic
accident or medical emergencies.
9. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see
a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency
number.
"The wireless industry reminds you to use your phone safely when driving."
For more information, please call 1-888-901-SAFE, or visit our web-site www.ctia.org
.
Important!: If you are using a handset other than a standard numeric keypad, please call 1-888-901-7233.
Provided by the Cellular Telecommunications & Internet Association.
103
Responsible Listening
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud sounds over time. The risk of hearing loss increases
as sound is played louder and for longer durations. Prolonged exposure to loud sounds (including music) is the
most common cause of preventable hearing loss. Some scientific research suggests that using portable audio
devices, such as portable music players and cellular telephones, at high volume settings for long durations may
lead to permanent noise-induced hearing loss. This includes the use of headphones (including headsets, earbuds,
and Bluetooth or other wireless devices). Exposure to very loud sound has also been associated in some studies
with tinnitus (a ringing in the ear), hypersensitivity to sound and distorted hearing.
Individual susceptibility to noise-induced hearing loss and potential hearing problem varies. Additionally, the
amount of sound produced by a portable audio device varies depending on the nature of the sound, the device
settings, and the headphones that are used. As a result, there is no single volume setting that is appropriate for
everyone or for every combination of sound, settings and equipment.
You should follow some commonsense recommendations when using any portable audio device:
•
•
Set the volume in a quiet environment and select the lowest volume at which you can hear adequately.
When using headphones, turn the volume down if you cannot hear the people speaking near you or if the person sitting next to
you can hear what you are listening to.
•
Do not turn the volume up to block out noisy surroundings. If you choose to listen to your portable device in a noisy
environment, use noise-cancelling headphones to block out background environmental noise. By blocking background
environment noise, noise cancelling headphones should allow you to hear the music at lower volumes than when using
earbuds.
•
•
Limit the amount of time you listen. As the volume increases, less time is required before you hearing could be affected.
Avoid using headphones after exposure to extremely loud noises, such as rock concerts, that might cause temporary hearing
loss. Temporary hearing loss might cause unsafe volumes to sound normal.
•
Do not listen at any volume that causes you discomfort. If you experience ringing in your ears, hear muffled speech or
experience any temporary hearing difficulty after listening to your portable audio device, discontinue use and consult your
doctor.
You can obtain additional information on this subject from the following sources:
Health and Safety Information
104
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: [email protected]
Internet: http://www.audiology.org
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Email: [email protected]
Internet: http://www.nidcd.nih.gov/
National Institute for Occupational Safety and Health (NIOSH)
395 E Street, S.W.
Suite 9200
Patriots Plaza Building
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
1-800-CDC-INFO (1-800-232-4636)
Outside the U.S. 513-533-8328
Email: [email protected]
Internet: http://www.cdc.gov
1-888-232-6348 TTY
105
Operating Environment
Remember to follow any special regulations in force in any area and always switch your phone off whenever it is
forbidden to use it, or when it may cause interference or danger.
When connecting the phone or any accessory to another device, read its user's guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is recommended that the equipment should only be used in the
normal operating position (held to your ear with the antenna pointing over your shoulder if you are using an
external antenna).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals from your wireless phone. Consult the manufacturer to
discuss alternatives.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained between a handheld wireless phone and an
implantable medical device, such as a pacemaker or implantable cardioverter defibrillator, to avoid potential
interference with the device.
Persons who have such devices:
•
•
•
•
•
Should ALWAYS keep the phone more than six (6) inches from their implantable medical device when the phone is turned ON;
Should not carry the phone in a breast pocket;
Should use the ear opposite the implantable medical device to minimize the potential for interference;
Should turn the phone OFF immediately if there is any reason to suspect that interference is taking place;
Should read and follow the directions from the manufacturer of your implantable medical device. If you have any questions
about using your wireless phone with such a device, consult your health care provider.
For more information see:
Health and Safety Information
106
FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission (FCC) Report and Order in WT Docket 01-309
modified the exception of wireless phones under the Hearing Aid Compatibility Act of 1988 (HAC Act) to require
digital wireless phones be compatible with hearing-aids.
The intent of the HAC Act is to ensure reasonable access to telecommunications services for persons with hearing
disabilities.
While some wireless phones are used near some hearing devices (hearing aids and cochlear implants), users may
detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this
interference noise, and phones also vary in the amount of interference they generate.
The wireless telephone industry has developed a rating system for wireless phones, to assist hearing device users
find phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are
rated have the rating on their box or a label located on the box.
The ratings are not guarantees. Results will vary depending on the user's hearing device and hearing loss. If your
hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully.
Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing
devices than phones that are not labeled. M4 is the better/higher of the two ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to generate less interference to hearing
devices than phones that are not labeled. T4 is the better/higher of the two ratings.
Hearing devices may also be rated. Your hearing device manufacturer or hearing health professional may help you
find this rating. Higher ratings mean that the hearing device is relatively immune to interference noise. The hearing
aid and wireless phone rating values are then added together. A sum of 5 is considered acceptable for normal use. A
sum of 6 is considered for best use.
107
T3
+
T2
=
5
M3
+
M2
=
5
In the above example, if a hearing aid meets the M2 level rating and the wireless phone meets the M3 level rating,
the sum of the two values equal M5. This is synonymous for T ratings. This should provide the hearing aid user
with "normal usage" while using their hearing aid with the particular wireless phone. "Normal usage" in this
context is defined as a signal quality that is acceptable for normal operation.
The M mark is intended to be synonymous with the U mark. The T mark is intended to be synonymous with the UT
mark. The M and T marks are recommended by the Alliance for Telecommunications Industries Solutions (ATIS).
The U and UT marks are referenced in Section 20.19 of the FCC Rules.
The HAC rating and measurement procedure are described in the American National Standards Institute (ANSI)
C63.19 standard.
Other Medical Devices
If you use any other personal medical devices, consult the manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this
information. Switch your phone off in health care facilities when any regulations posted in these areas instruct you
to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check
with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require you to do so.
Health and Safety Information
108
Potentially Explosive Environments
Switch your phone off when in any area with a potentially explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.
Users are advised to switch the phone off while at a refueling point (service station). Users are reminded of the need
to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical
plants or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on
boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane),
areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where
you would normally be advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee connection in all conditions. Therefore, you should never rely solely
on any wireless phone for essential communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all wireless phone networks or when certain network services
and/or phone features are in use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for example, 911 or other official emergency
number). Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example), you may first need to deactivate those features before you
can make an emergency call. Consult this document and your local cellular service provider.
When making an emergency call, remember to give all the necessary information as accurately as possible.
Remember that your phone may be the only means of communication at the scene of an accident; do not cut off the
call until given permission to do so.
109
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play with it because they could hurt themselves and
others, damage the phone or make calls that increase your phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can
require you to stop using the phone if such interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or butane) must comply with the National Fire Protection
Standard (NFPA-58). For a copy of this standard, contact the National Fire Protection Association:
NFPA (National Fire Protection Agency)
1 Batterymarch Park
Quincy, Massachusetts
USA 02169-7471
Internet: http://www.nfpa.org
Cautions
Any changes or modifications to your phone not expressly approved in this document could void your warranty for
this equipment, and void your authority to operate this equipment. Only use approved batteries, antennas and
chargers. The use of any unauthorized accessories may be dangerous and void the phone warranty if said
accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting,
bending or sitting on it.
Other Important Safety Information
•
Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the device.
•
•
Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or
accessories.
Health and Safety Information
110
•
For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both
installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If wireless equipment is
improperly installed and the air bag inflates, serious injury could result.
•
•
Switch your phone off before boarding an aircraft. The use of wireless phone in aircraft is illegal and may be dangerous to the
aircraft's operation.
Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action,
or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the signal strength in your area. Your phone informs you of
the current signal strength by displaying a number of bars next to the signal strength icon. The more bars displayed,
the stronger the signal.
If you're inside a building, being near a window may give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after searching, a Power Save feature is automatically activated. If your
phone is active, it periodically rechecks service availability or you can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays on the screen. When a signal is found, your phone
returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's turned on, it receives and transmits radio
frequency (RF) signals. When you use your phone, the system handling your call controls the power level. This
power can range from 0.006 watts to 0.2 watts in digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should service your phone and accessories. Faulty
service may void the warranty.
There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory service.
•
To ensure that the Hearing Aid Compatibility rating for your phone is maintained, secondary transmitters such as Bluetooth and
WLAN components must be disabled during a call. For more information, refer to “Turn Bluetooth On or Off” on page 65.
111
•
If your phone is equipped with an external antenna, hold the phone with the antenna raised, fully-extended and over your
shoulder.
•
•
•
•
•
Do not hold, bend or twist the phone's antenna, if applicable.
Do not use the phone if the antenna is damaged.
If your phone is equipped with an internal antenna, obstructing the internal antenna could inhibit call performance.
Speak directly into the phone's receiver.
Avoid exposing your phone and accessories to rain or liquid spills. If your phone does get wet, immediately turn the power off
and remove the battery. If it is inoperable, call Customer Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may require additional subscription and/or usage charges.
Not all features are available for purchase or use in all areas. Downloadable Ring Tones may be available at an
additional cost. Other conditions and restrictions may apply. See your service provider for additional information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage patterns and conditions. Battery power consumption
depends on factors such as network configuration, signal strength, operating temperature, features selected,
frequency of calls, and voice, data, and other application usage patterns.
Battery Precautions
•
Avoid dropping the cell phone. Dropping it, especially on a hard surface, can potentially cause damage to the phone and
battery. If you suspect damage to the phone or battery, take it to a service center for inspection.
Never use any charger or battery that is damaged in any way.
•
•
•
Do not modify or remanufacture the battery as this could result in serious safety hazards.
If you use the phone near the network's base station, it uses less power; talk and standby time are greatly affected by the
signal strength on the cellular network and the parameters set by the network operator.
•
•
Follow battery usage, storage and charging guidelines found in the user’s guide.
Battery charging time depends on the remaining battery charge and the type of battery and charger used. The battery can be
charged and discharged hundreds of times, but it will gradually wear out. When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time to buy a new battery.
•
If left unused, a fully charged battery will discharge itself over time.
Health and Safety Information
112
•
•
Use only Samsung-approved batteries and recharge your battery only with Samsung-approved chargers. When a charger is not
in use, disconnect it from the power source. Do not leave the battery connected to a charger for more than a week, since
overcharging may shorten its life.
Do not use incompatible cell phone batteries and chargers. Some Web sites and second-hand dealers, not associated with
reputable manufacturers and carriers, might be selling incompatible or even counterfeit batteries and chargers. Consumers
should purchase manufacturer or carrier recommended products and accessories. If unsure about whether a replacement
battery or charger is compatible, contact the manufacturer of the battery or charger.
•
Misuse or use of incompatible phones, batteries, and charging devices could result in damage to the equipment and a possible
risk of fire, explosion, leakage, or other serious hazard.
•
•
Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first.
Do not leave the battery in hot or cold places, such as in a car in summer or winter conditions, as you will reduce the capacity
and lifetime of the battery. Always try to keep the battery at room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below
0 °C (32 °F).
•
•
•
Do not place the phone in areas that may get very hot, such as on or near a cooking surface, cooking appliance, iron, or
radiator.
Do not get your phone or battery wet. Even though they will dry and appear to operate normally, the circuitry could slowly
corrode and pose a safety hazard.
Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and - terminals of the battery (metal strips on the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the terminals may damage the battery or the object causing the short-circuiting.
•
•
Do not permit a battery out of the phone to come in contact with metal objects, such as coins, keys or jewelry.
Do not crush, puncture or put a high degree of pressure on the battery as this can cause an internal short-circuit, resulting in
overheating.
•
Dispose of used batteries in accordance with local regulations. In some areas, the disposal of batteries in household or
business trash may be prohibited. For safe disposal options for Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a fire.
Care and Maintenance
Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions
below will help you fulfill any warranty obligations and allow you to enjoy this product for many years.
•
Keep the phone and all its parts and accessories out of the reach of small children.
113
•
•
•
•
Keep the phone dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits.
Do not use the phone with a wet hand. Doing so may cause an electric shock to you or damage to the phone.
Do not use or store the phone in dusty, dirty areas, as its moving parts may be damaged.
Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp
or melt certain plastics.
•
Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside
the phone, which may damage the phone's electronic circuit boards.
•
•
Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
•
•
Do not paint the phone. Paint can clog the device's moving parts and prevent proper operation.
Do not put the phone in or on heating devices, such as a microwave oven, a stove or a radiator. The phone may explode when
overheated.
•
•
If your phone is equipped with an external antenna, use only the supplied or an approved replacement antenna. Unauthorized
antennas or modified accessories may damage the phone and violate regulations governing radio devices.
If the phone, battery, charger or any accessory is not working properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for service.
Health and Safety Information
114
Section 13: Warranty Information
Standard Limited Warranty
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the original purchaser ("Purchaser")
that SAMSUNG's Phones and accessories ("Products") are free from defects in material and workmanship under
normal use and service for the period commencing upon the date of purchase and continuing for the following
specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to normal use; (d) malfunctions resulting from the use
of Product in conjunction with accessories, products, or ancillary/peripheral equipment not furnished or approved by
SAMSUNG; (e) defects or damage from improper testing, operation, maintenance, installation, or adjustment; (f)
installation, maintenance, and service of Product, or (g) Product used or purchased outside the United States or
Canada.
This Limited Warranty covers batteries only if battery capacity falls below 80% of rated capacity or the battery leaks,
and this Limited Warranty does not cover any battery if (i) the battery has been charged by a battery charger not
specified or approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery are broken or show
evidence of tampering, or (iii) the battery has been used in equipment other than the SAMSUNG phone for which it is
specified.
115
What are SAMSUNG's Obligations? During the applicable warranty period, SAMSUNG will repair or replace, at
SAMSUNG's sole option, without charge to Purchaser, any defective component part of Product. To obtain service
under this Limited Warranty, Purchaser must return Product to an authorized phone service facility in an adequate
container for shipping, accompanied by Purchaser's sales receipt or comparable substitute proof of sale showing
the date of purchase, the serial number of Product and the sellers' name and address. To obtain assistance on
where to deliver the Product, call Samsung Customer Care at 1-888-987-4357. Upon receipt, SAMSUNG will
promptly repair or replace the defective Product. SAMSUNG may, at SAMSUNG's sole option, use rebuilt,
reconditioned, or new parts or components when repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases, pouches and holsters will be warranted for a
period of ninety (90) days. All other repaired/replaced Product will be warranted for a period equal to the remainder
of the original Limited Warranty on the original Product or for 90 days, whichever is longer. All replaced parts,
components, boards and equipment shall become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this Limited Warranty, Purchaser must pay all parts,
shipping, and labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY? EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND SAMSUNG MAKES NO WARRANTY OR
REPRESENTATION AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, OF ANY
KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
•
•
•
•
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE;
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS WARRANTY
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT
MAY ARISE BY OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF TIME AS THE
EXPRESS WRITTEN WARRANTY STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE, USE, OR
Warranty Information
116
MISUSE OF, OR INABILITY TO USE THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF
USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES
ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG,
ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST
PURCHASER BY ANY OTHER PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER
THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY. IF ANY
PORTION OF THIS LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH
PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR THE REMAINDER OF
THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE
LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE PURCHASER
MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY
SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE
PRODUCT DISTRIBUTED BY SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH
SOFTWARE OR EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE AND
SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE
DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG, and SAMSUNG's Product
pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty. The agents,
employees, distributors, and dealers of SAMSUNG are not authorized to make modifications to this Limited
Warranty, or make additional warranties binding on SAMSUNG. Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written, do not constitute warranties by SAMSUNG and should not be
relied upon.
117
End User License Agreement for Software
IMPORTANT. READ CAREFULLY: This End User License Agreement ("EULA") is a legal agreement between you
(either an individual or a single entity) and Samsung Electronics Co., Ltd. for software owned by Samsung
Electronics Co., Ltd. and its affiliated companies and its third party suppliers and licensors that accompanies this
EULA, which includes computer software and may include associated media, printed materials, "online" or
electronic documentation ("Software"). BY CLICKING THE "I ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE
DISABLE THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD, ACCESS OR OTHERWISE USE THE SOFTWARE),
YOU AGREE TO BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT ACCEPT THE TERMS IN THIS EULA, YOU
MUST CLICK THE "DECLINE" BUTTON, DISCONTINUE USE OF THE SOFTWARE.
1. GRANT OF LICENSE. Samsung grants you the following rights provided that you comply with all terms and
conditions of this EULA: You may install, use, access, display and run one copy of the Software on the local hard
disk(s) or other permanent storage media of one computer and use the Software on a single computer or a mobile
device at a time, and you may not make the Software available over a network where it could be used by multiple
computers at the same time. You may make one copy of the Software in machine-readable form for backup
purposes only; provided that the backup copy must include all copyright or other proprietary notices contained on
the original.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves all rights not expressly granted to you in this
EULA. The Software is protected by copyright and other intellectual property laws and treaties. Samsung or its
suppliers own the title, copyright and other intellectual property rights in the Software. The Software is licensed,
not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse engineer, decompile, disassemble, or otherwise
attempt to discover the source code or algorithms of, the Software (except and only to the extent that such activity
is expressly permitted by applicable law notwithstanding this limitation), or modify, or disable any features of, the
Software, or create derivative works based on the Software. You may not rent, lease, lend, sublicense or provide
commercial hosting services with the Software.
4. CONSENT TO USE OF DATA. You agree that Samsung and its affiliates may collect and use technical information
gathered as part of the product support services related to the Software provided to you, if any, related to the
Software. Samsung may use this information solely to improve its products or to provide customized services or
technologies to you and will not disclose this information in a form that personally identifies you.
Warranty Information
118
5. UPGRADES. This EULA applies to updates, supplements and add-on components (if any) of the Software that
Samsung may provide to you or make available to you after the date you obtain your initial copy of the Software,
unless we provide other terms along with such upgrade. To use Software identified as an upgrade, you must first be
licensed for the Software identified by Samsung as eligible for the upgrade. After upgrading, you may no longer use
the Software that formed the basis for your upgrade eligibility.
6. SOFTWARE TRANSFER. You may not transfer this EULA or the rights to the Software granted herein to any third
party unless it is in connection with the sale of the mobile device which the Software accompanied. In such event,
the transfer must include all of the Software (including all component parts, the media and printed materials, any
upgrades, this EULA) and you may not retain any copies of the Software. The transfer may not be an indirect
transfer, such as a consignment. Prior to the transfer, the end user receiving the Software must agree to all the EULA
terms.
7. EXPORT RESTRICTIONS. You acknowledge that the Software is subject to export restrictions of various countries.
You agree to comply with all applicable international and national laws that apply to the Software, including the U.S.
Export Administration Regulations, as well as end user, end use, and destination restrictions issued by U.S. and
other governments.
8. TERMINATION. This EULA is effective until terminated. Your rights under this License will terminate automatically
without notice from Samsung if you fail to comply with any of the terms and conditions of this EULA. Upon
termination of this EULA, you shall cease all use of the Software and destroy all copies, full or partial, of the
Software.
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge and agree that use of the Software is at your sole risk
and that the entire risk as to satisfactory quality, performance, accuracy and effort is with you. TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS AND
WITHOUT WARRANTY OF ANY KIND, AND SAMSUNG AND ITS LICENSORS (COLLECTIVELY REFERRED TO AS
"SAMSUNG" FOR THE PURPOSES OF SECTIONS 9, 10 and 11) HEREBY DISCLAIM ALL WARRANTIES AND
CONDITIONS WITH RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF SATISFACTORY QUALITY
OR WORKMANLIKE EFFORT, OF FITNESS FOR A PARTICULAR PURPOSE, OF RELIABILITY OR AVAILABILITY, OF
ACCURACY, OF LACK OF VIRUSES, OF QUIET ENJOYMENT, AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS.
SAMSUNG DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR ENJOYMENT OF THE SOFTWARE, THAT THE
FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE OPERATION OF THE
SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE
CORRECTED. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG AUTHORIZED
119
REPRESENTATIVE SHALL CREATE A WARRANTY. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. SOME JURISDICTIONS DO NOT ALLOW
THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON APPLICABLE STATUTORY RIGHTS OF A CONSUMER,
SO THESE EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN OTHER DAMAGES. TO THE EXTENT NOT
PROHIBITED BY LAW, IN NO EVENT SHALL SAMSUNG BE LIABLE FOR PERSONAL INJURY, OR ANY INCIDENTAL,
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF DATA,
BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR
USE OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF OR FAILURE TO PROVIDE SUPPORT OR OTHER
SERVICES, INFORMATION, SOFTWARE, AND RELATED CONTENT THROUGH THE SOFTWARE OR OTHERWISE
ARISING OUT OF THE USE OF THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION WITH ANY PROVISION
OF THIS EULA, HOWEVER CAUSED, REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT OR OTHERWISE)
AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO
NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THIS LIMITATION MAY NOT APPLY TO YOU.
11. LIMITATION OF LIABILITY. Notwithstanding any damages that you might incur for any reason whatsoever
(including, without limitation, all damages referenced herein and all direct or general damages in contract or
anything else), the entire liability of Samsung under any provision of this EULA and your exclusive remedy
hereunder shall be limited to the greater of the actual damages you incur in reasonable reliance on the Software up
to the amount actually paid by you for the Software or US$5.00. The foregoing limitations, exclusions and
disclaimers (including Sections 9, 10 and 11) shall apply to the maximum extent permitted by applicable law, even
if any remedy fails its essential purpose.
12. U.S. GOVERNMENT END USERS. The Software is licensed only with "restricted rights" and as "commercial
items" consisting of "commercial software" and "commercial software documentation" with only those rights as
are granted to all other end users pursuant to the terms and conditions herein.
13. APPLICABLE LAW. This EULA is governed by the laws of TEXAS, without regard to conflicts of laws principles.
This EULA shall not be governed by the UN Convention on Contracts for the International Sale of Goods, the
application of which is expressly excluded. If a dispute, controversy or difference is not amicably settled, it shall be
finally resolved by arbitration in Seoul, Korea in accordance with the Arbitration Rules of the Korean Commercial
Arbitration Board. The award of arbitration shall be final and binding upon the parties.
Warranty Information
120
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire agreement between you and Samsung relating to
the Software and supersedes all prior or contemporaneous oral or written communications, proposals and
representations with respect to the Software or any other subject matter covered by this EULA. If any provision of
this EULA is held to be void, invalid, unenforceable or illegal, the other provisions shall continue in full force and
effect.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the standard methods, the data only appears to be
removed on a superficial level, and it may be possible for someone to retrieve and reuse the data by means of
special software.
To avoid unintended information leaks and other problems of this sort, it is recommended that the device be
returned to Samsung’s Customer Care Center for an Extended File System (EFS) Clear which will eliminate all user
memory and return all settings to default settings. Please contact the Samsung Customer Care Center for details.
Important!: Please provide warranty information (proof of purchase) to Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges may apply.
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad, dial the numbers listed in brackets.
121
Phone: 1-888-987-HELP (4357)
©
2009 Samsung Telecommunications America. All rights reserved.
No reproduction in whole or in part allowed without prior written approval. Specifications and availability subject to
change without notice.
Warranty Information
122
O
R
S
Options
Organizer 76
Security 62
Settings 56
Bluetooth 65
Display 58
Phone 60
Calculator 81
Calendar 77
Stopwatch 84
Timer 83
Security 62
Sound 56
P
Shortcuts 27
SIM card
installing 4
Phone
Sound Settings
icons 15
Phonebook
MegaTones 56
Photos
PIN
Speakerphone 23
Speed Dial
change 63
Standard Limited Warranty
check 63
125
|