SCH-R351 Series
P O R T A B L E
M O B I L E
User Manual
D U A L - B A N D
P H O N E
Please read this manual before operating your
phone, and keep it for future reference.
Printed in China.
®
®
Nuance , VSuite™, T9 Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its
affiliates in the United States and/or other countries.
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
microSD™ and the microSD logo are Trademarks of the SD Card Association.
®
Openwave is a registered Trademark of Openwave, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
1
2
FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless
3
Section 1: Getting Started
This section explains how to start using your Samsung Freeform
phone by activating your service and setting up your Voicemail,
and explains how this manual is put together.
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
Understanding this User Manual
highlight
UsetheNavigation key(
effect onto a menu item or screen item of interest.
Press the outer ring up, down, left, or right.
) tomoveahighlighting
The chapters of this manual generally follow the same order as
the menus and sub-menus in your phone. A robust index for
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 87.
select
After “highlighting” a menu item or screen item,
pressthemiddle
oftheNavigation
keyto
launch, access, or save a highlighted menu item or
screen field of interest.
Notes and Tips
➔
Used in place of “select” in long “drill down”
procedure steps.
Throughout this manual some text is set apart from the rest. In
this way, important information, quick methods for activating
features, to define terms, and more are emphasized. The
definitions for these methods are as follows:
Example: “...Settings
➔
Call Settings
➔
Call Answer...”
•
•
•
Notes — Explain alternative options within the current feature, menu,
or sub-menu.
Installing the Battery
Tips — Provide quick or innovative methods for performing functions
related to the subject at hand.
Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
Important — Points out important information about the current
feature that could affect performance, or even damage your phone.
Getting Started
4
2. Press down on the battery cover (1) and slide the cover
toward the top end of the phone. Lift the cover (2) up and
away from the phone, bottom end first.
Important!: You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery.
ꢁ
ꢀ
ꢁ
ꢀ
1. Insert the top end of the battery first (1), matching the gold
contacts on the top of the battery to those inside of the
phone battery compartment.
3. Lift the bottom of the battery up (3) and away (4) from the
phone.
2. Lightly press the bottom end of the battery down (2) into
Charging the Battery
the phone until it slips into place.
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate your warranty and may cause
damage.
3. Place the battery cover over the battery (3) and press
lightly upward (4) until it clicks into place.
Removing the Battery
1. Press and hold
to turn off the phone (if on).
5
Using the Travel Adapter
2. Insert the USB Data Cable into the Travel Adapter (see
above) and into the charger/accessory connector on the
upper right side of your phone, as shown here.
The travel adapter
included with your phone
is a convenient, light-
weight charger that
rapidly charges your
phone from any 120/220
VAC outlet.
1. Plug the large end of the Travel Adapter into a standard
120 VAC or 220 VAC wall outlet.
Important!: For connection to an electrical supply not located in North
America, you must use an adaptor of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
Warning!: If your handset has a touch screen display, please note that a
touch screen responds best to a light touch from the pad of your
finger or a non-metallic stylus. Using excessive force or a metallic
object when pressing on the touch screen may damage the
tempered glass surface and void the warranty. For more
Important!: You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
Getting Started
6
Low Battery Indicator
Note: If you are outside of your carrier’s coverage or roaming area (
),
the No Service icon ( ) appears at the top of the phone’s display. If
you cannot place or receive calls, try later when service is available, or
at another location.
The battery indicator (
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
) in the upper-right corner of the
Turning Your Phone Off
Five bars (
) indicate a full charge.
ᮣ
Press and hold
phone powers off.
for two or more seconds. Your
An empty battery icon (
) indicates a near empty battery.
) and a tone sounding
A blinking empty battery icon (
indicate you have two to three minutes before the battery is too
low to operate the phone.
Note: If your phone is on and you press
for less than one second, the
phone will not power off. This prevents your phone from being turned
off accidentally.
If you continue to use your phone without charging its battery, the
phone will shut down.
Setting Up Your Voicemail
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
Note: Once your Voicemail account has been set up, you can use the
Voicemail folder (under the Messages menu) to view details of voice
messages in your Voicemail box.
Turning Your Phone On
1. Press
.
1. In standby mode, press and hold
or dial your own
2. The phone begins searching for a network signal.
mobile number to dial Voicemail.
3. Once the phone finds a signal, the time, date, and day
2. Follow the prompts in the new user tutorial to setup your
appear at the top of the display.
mail box.
4. You’re now ready to place and receive calls.
7
Listen to Voicemail
2. Insert the memory card — contact side facing down and
smaller end pointing toward the phone — into the memory
card slot.
ᮣ
In standby mode, press and hold
or dial your own
mobile number to dial Voicemail. After connecting, you will
hear your voice greeting. You are prompted to enter your
password.
Memory Card (Optional)
Your phone has a Memory Card slot on its left side, across from
™
the keypad. You can install a microSD card to provide
additional memory for storing files (such as, sound files and
photos) in your phone.
Install a Memory Card
1. Open the back cover of your phone.
3. Press the memory card into the slot until the card locks
into place.
4. Replace the back cover.
Remove a Memory Card
1. Open the back cover of your phone.
2. Press the memory card inward until the card lock releases.
3. Remove the memory card from the memory card slot.
4. Replace the back cover.
Getting Started
8
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that will be displayed
when the phone is in use.
Side View of Your Phone
Features of Your Phone
Domestic and international voice and text messaging service (available
on participating networks).
1
•
2
3
•
High speed data (CDMA 2000 1x Technology)
®
• Bluetooth Wireless Technology (see Note)
•
•
•
•
•
•
•
•
Digital Assistant Tools
QWERTY Keypad
Picture (MMS) Messaging
Text (SMS) Messaging
Built-in 1.3 Megapixel Digital Camera
Voice Dial
Features
1. Volume Key — In standby mode, lets you adjust the
incoming call ringer volume. When receiving a call, lets
you temporarily mute the ringer.
Music Player (MP3 — requires an optional Memory Card)
Memory Card Slot (microSD™ — up to 16 GB)
Note: The Freeform phone supports the wireless headset, hands-free, dial-
up networking, A2DP, Phonebook Access, serial port, file transfer
profiles for Bluetooth® wireless technology. The Freeform does not
support all Bluetooth OBEX profiles.
2. Power Accessory Connector — Used to connect charging
/
accessories or optional accessory cables to your phone.
3. Camera Key — In Camera mode, takes pictures.
9
Features
Front View of Your Phone
1. Main Display — Indicates the status of your phone,
including numbers dialed, feature and function screens,
status icons, message indicators and contents, signal
strength, and so on.
20
2. Left Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom left corner of the Main LCD.
1
2
19
18
3. Speakerphone Key — Press and hold to turn Speakerphone
mode On and Off.
4. Talk Key — Lets you place or receive a call. In standby
17
16
15
mode, press the key once to access the recent calls log.
5. QWERTY Keypad — Use these keys to enter numbers,
3
4
letters, and symbols.
6. Fn Key — Toggles the text input mode to let you use the
QWERTY keypad to enter numbers and symbols as well as
letters.
5
14
13
6
7
7. Shift Key — Toggles capitalization for text input between
mixed case (Abc), uppercase (ABC), and lowercase (abc).
Capitalization remains as selected until you press the Shift
key again.
10
11 12
9
8
Understanding Your Phone
10
8. Voice Command Key — Press and hold this key to activate
Voice Commands. In text entry mode, press to pop-up the
first of three pages of symbols. Select a symbol by
pressing the associated number key.
17. Right Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom right corner of the Main Display.
18. MENU-OK Key — In standby mode, launches the Main
Menu. When navigating through a menu, accepts the
highlighted choice in a menu.
9. Microphone — Lets the other caller hear you clearly when
you are speaking to them.
10. Space Key — In text entry mode, lets you enter spaces
between words and characters. In standby mode, allows
you to Lock or Unlock your keypad.
19. Navigation Key — In Menu mode, lets you scroll through
the phone menu options. In Standby mode, lets you access
preset functions and one user-defined function.
11. Calendar Key — Lets you view the current, past, or future
20. Earpiece — Lets you hear ringing and alert tones, alarm
month in a monthly calendar layout.
tones, and the other parties to calls.
12. Email Key — Lets you access email from your phone.
Back View of Your Phone
13. Enter Key — Press to accept a text entry or to enter spaces
1
between lines of text.
14. Backspace Key — In text entry mode, deletes characters
from the display.
3
15. END Key — Ends a call. If you press and hold the END key,
the power goes On or Off. When you receive an incoming
call, press to send the call to voicemail.
2
4
16. BACK Key — In text entry mode, deletes characters from
the display. In menu mode, returns you to the previous
menu or screen.
11
Features
Talk Key
1. Headset Connector — Used to connect an optional headset
The Talk key (
) is used to answer calls, dial calls, and to
(for hands free operation and/or music playback) or an
optional TTY device.
recall the last number(s) dialed, received, or missed.
•
•
•
Press
Enter a number and briefly press
Briefly press in standby mode to display a list of recent calls
to and from your phone.
once to answer calls.
2. Speaker — Allows you to hear music.
3. Camera Lens — The lens of your built-in camera.
4. Mirror — Allows you to see yourself when taking pictures.
Command Keys
to make a call.
•
•
Press
Press
twice in standby mode to call the most recent number.
to pick up a waiting call. Press
again to switch
Soft Keys
back to the other call.
Functions for the soft keys are indicated by labels that appear in
the display above each soft key. There are two soft keys, Left
BACK Key
The BACK key (
) is used to erase or clear numbers, text, or
(
) and Right (
).
symbols from the display. You can also use the key to return to a
previous menu or to return to standby mode from any menu.
MENU-OK Key
•
In standby mode, press the MENU-OK key (
) to launch the Main
•
If you enter an incorrect character, briefly press
(and delete) the character.
to backspace
Menu.
•
•
In a menu, press
In camera mode, press
message.
to accept the highlighted selection.
•
•
To erase the entire sentence, press and hold
To back up one menu level, briefly press
.
to take a photo or to create a Picture
.
End Key
•
When the MENU-OK key function is EDIT, press the EDIT key (
to edit a Draft message.
)
•
•
•
Press and hold the End key (
Briefly press
Press
) to turn your phone on or off.
once to disconnect a call.
to return to standby mode from any menu, or to cancel
the last input.
Understanding Your Phone
12
Navigation Key
Press to start a new line.
Use the directional keys on the Navigation key (
menus, sub-menus, and lists.
) to browse
) located
Press once to enter a single upper case letter.
In Abc mode, press once to select CAPS LOCK.
Press once more to remove CAPS LOCK.
Camera Key
In standby mode, press and hold the Camera key (
Presstopop-upthefirstofthreepagesofsymbols. Select
a symbol by pressing the associated number key.
on the right side of your phone, to activate the camera.
In camera mode, pressing the Camera key (
picture.
) takes a
Press to toggle entry mode between Abc and 123/Sym.
Press to insert a space in a text entry.
Entering Text
Your phone has a QWERTY (
Understanding the Display Screens
) keypad to
support quick and easy text input. You can enter text as you
would when using a computer keyboard.
Main Display
1
The keys are labeled with a letter on the upper half and a number
or symbol on the lower half. Press the key corresponding to the
character you want to enter.
2
3
In addition, you can use the following special function keys:
Press to delete characters.
4
5
Tip: You can also delete a character by pressing
.
1. The top line of your phone’s display contains icons that
indicate network status, battery power, signal strength,
13
2. The next line contains the date and time, and counters for
missed calls and messages.
3. The center portion of the display contains the Info Panel,
which shows information such as call progress
information, messages, appointments, and photos.
4. The next portion of the display shows the shortcuts for the
Main Menu.
5. The bottom line of the display shows current soft key
functions. The sample screen shows that pressing the Left
(Messages) soft key will display the Messages menu,
pressing the key will display the Main Menu, and
pressing the Right (Contacts) soft key will display the Find
menu.
Display Screen Icons
Your Freeform phone can show you definitions of the icons that
appear on the top line of the displays.
To access the Icon Glossary:
ᮣ
In standby mode, press Main Menu
, then select
Settings Phone Info Icon Glossary. A list appears
➔
➔
showing the icons that can appear on the top line of the
displays.
Understanding Your Phone
14
Section 3: Call Functions
This section explains how to make and answer calls. This section
also includes the features and functionality associated with
making or answering calls.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Making a Call — Number Entry Dialing
1. With the phone on, enter the number to call using the
keypad.
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communication.
2. Press
to place the call.
Dialing Emergency Numbers
Dialing International Numbers
To place an emergency call:
Call Another Country — Manual Method
1. With the phone on, enter 911 using the keypad.
1. In Standby mode, enter 011
(the three-digit exit code for
the United States).
2. Press
to place the call.
Use the Emergency # settings to specify other numbers as
2. Enter the country code to dial.
emergency numbers. (page 85.)
3. Enter the number to call, then
Important!: Emergency number 911 is preset into your phone. You can dial
this number almost any time, even when the phone is locked or
restricted.
press
.
Note: Puerto Rico and Canada are on the North American dialing plan.
Making calls to Puerto Rico and Canada is similar to making calls
within the United States, no unique country codes are necessary.
If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
15
Call Another Country — Shortcut
Method
3. Enter the number to call, then press
.
Manual Pause Calling
1. In Standby mode, press and
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
hold
until a plus sign (+)
appears in the display.
Note: When you press
, your phone
with 011, the three-digit exit code for the
automatically replaces this
+
United States.
To manually call a number with pause(s) without storing the
number to Contacts:
2. Enter the country code for the
1. Enter the number you wish to call.
country to call, or press and
hold
until a second plus
2. Press the Options soft key. A pop-up menu containing the
sign (
+) appears in the display.
following options appears in the display:
•
2-Sec Pause — P pause — A two-second pause stops the
calling sequence for two seconds and then automatically sends the
remaining digits.
Tip: If you place most or all of your
international calls to numbers in the
same country, set-up the International
Dialing shortcut to automatically dial
that country’s code.
•
Wait — W pause — A hard pause stops the calling sequence until
you press
3. Highlight the desired pause option.
4. Press to enter the highlighted pause into your
number sequence.
.
Note: When you press
, your phone
automatically replaces the second
+
Note: If you select 2-Sec Pause
,
P
appears in the display. If you select Wait,
with the two-digit country code you selected as the International
W
appears in the display.
Dialing shortcut.
Call Functions
16
5. Press
to call the number.
Example: For Speed Dial number 3, press and hold the
key until the
Making a Call — Contact Dialing
name and number display on the screen and the number dials.
You can store phone numbers and contact names in your phone’s
Contacts list. To call a Contact, do the following:
Two-Touch Dialing
Memory locations 10 through 99 are special Two-Touch dialing
locations.
1. Press the Contacts soft key. The Contacts Find screen
appears in the display.
The Contacts list displays the first few entries with names
matching the entered letters.
Example: For location number 13, briefly press
, then press and hold
until the name and number display on the screen and the number
dials.
Three-Touch Dialing
3. Highlight the Contact to call and press
Memory locations 100 through 999 are special Three-Touch
dialing locations.
Making a Call — Speed Dialing
Example: For location number 113, briefly press
, briefly press
again, then press and hold
until the name and number display
Speed Dialing lets you quickly and easily dial any contact in your
Contacts list by using that contact’s location number in the list.
You can assign and change location (speed dial) numbers for
your contacts.
on the screen and the number dials.
Pause Dialing From a Contacts Entry
•
If you speed dial a contact that contains (two-second) P pause(s)
One-Touch Dialing
simply wait for the pauses to pass and the dialing to complete.
•
If you speed dial a contact that contains (hard) W pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Speed Dial numbers 2 through 9 are special One-Touch dialing
numbers. You can call the phone numbers stored in your phone’s
Contacts list and assigned Speed Dial numbers 2 through 9 by
pressing and holding a single key.
17
Making a Call — Quick Search Dialing
Making a Call — Voice Dialing
Use the Quick Search feature to dial
any number stored in your Contacts
list by pressing the number keys or
letter keys that correspond to the first
few letters of a Contact name.
Your r351 mobile phone includes state-of-the-art voice
recognition software that lets you dial numbers using your voice.
Using Voice Dial
Use the Voice Dial command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Voice Dial to dial any valid telephone number,
even numbers not stored in your Contacts list, by speaking the
individual digits in the number (Digit Dialing).
Quick Search Dialing a Contact
To find and dial a Contact, do the following:
1. In Standby mode, press the number keys that correspond
Voice Dialing Tips:
to the first few letters of the Contact name, as shown.
•
•
Wait for the beep before speaking.
2. Press the Options soft key,
then select Search. The
Contacts list screen displays
showing the desired Contact
name.
Speak clearly at a normal volume, as if you were talking to someone
on the phone.
•
When saying a name, say the first name then the last name.
Dialing a Name
3. If needed, use the Up and
Down navigation keys to
To dial a name, do the following:
1. In Standby mode, press and hold
.
highlight the Contact to call.
“Say a Command” appears in the display and is
pronounced through the earpiece.
4. Press
to call the highlighted Contact. (For more
2. Say, “Call”.
You are prompted to “Say the name or #”.
Call Functions
18
Dialing a Number
3. Speak clearly and say the name of a person in the Contacts
list, first name followed by last name.
To dial a number using Voice Dial, do the following:
If the name is recognized, Voice Dial repeats the name and
dials the number.
1. In Standby mode, press and hold
Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Call”.
.
“
If Voice Dial is not sure which name you said, it displays a
choice list of up to three names and prompts you with “Did
you say?” followed by the first name on the list.
VoiceSignal prompts you to “Say the name or #”.
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
3. Speak clearly and say the telephone number of the person
you want to call. For example, say “7 8 1 5 5 5 6 2 0 0."
If it recognizes the number, Voice Dial repeats and dials the
number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers and
prompts you with “Did you say?” followed by the first
number on the list.
•
•
Press the Repeat soft key to say the name again.
Press the Settings soft key, then press the Exit soft key to exit
Voice Dial without dialing.
If the recognized name has multiple numbers stored for it
(that is, Home, Work, Mobile, and so on), Voice Dial
displays the possible choices and prompts you with “Which
4. Say “Yes” to confirm the number or “No” to hear the next
one, or use the keypad to select the correct number from
number?
”
5. Say one of the following number types:
•
•
To say the name again, press the Repeat soft key.
To exit Voice Dial without dialing, press
•
•
•
“
Home
Work
Mobile
”
.
“
”
Pause Dialing From a Contacts Entry
If you voice dial a contact that contains (two-second) P pause(s) simply
wait for the pauses to pass and the dialing to complete.
“
”
•
Voice Dial dials the specified number.
19
•
If you voice dial a contact that contains (hard) W pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Answering an Incoming Call
ᮣ
Press
. The ring tone and/or vibration stop and the
caller’s voice can be heard in the earpiece.
Tip: You can set your phone to automatically answer calls or to answer calls
Answering a Call
Your phone notifies you of a call in the following ways:
when you press any key but the
key or automatically. (For more
•
A ring tone sounds and/or your phone vibrates (Your phone provides
seven ring volume settings including: Silence All Vibrate Low
Low/Medium Medium Medium/High, or High, and/or different
,
,
,
Note: If you set the Auto Answer option to any value other than Off, the Auto
Answer icon ( ) displays.
,
,
ring types to distinguish callers. You can add vibration to any ring
volume setting.)
Adjusting the Call Volume
•
A phone number (unless blocked by the caller) and a name display on
the screen (If the caller’s number and name are stored in your Contacts
list).
During a call, press the Volume key (
the you hear the other party to the call at the desired loudness.
The Volume key is on the left side of phone.
) Up or Down until
•
•
If the caller can’t be identified, Call from unavailable#, Call from
The In-Use Options Menu
restricted number, or no number appears in the display.
Your phone continues to notify you of the call until one of the following
events occurs:
You can access numerous menus and features while in a call.
Note: If the call is disconnected while you are accessing the In-Use Option,
the In-Use Option disappears from the display and the phone
eventually returns to Standby mode.
–
–
–
–
–
You answer the call.
You ignore the call.
You mute the ringer.
The calling party ends the call.
The call is sent to voicemail.
1. While in a call, press the Options soft key.
The following menu items appear in the display:
Call Functions
20
• Contacts — The Contacts Find screen appears in the display.
• Recent Calls — The recent calls list appears in the display.
• Send DTMF — Sends your phone number as DTMF tones.
• Voice Privacy — Select Standard or Enhanced voice privacy.
Muting the Ringer
To mute the Incoming Call ringer, press the Volume key Up or
Down.
Note: Muting the ringer does not forward an incoming call to your voice mail.
Calls Log
Do one of the following:
The Calls log retains information about Outgoing, Incoming, and
Missed calls. You can also view times for your last call and the
time totals for all calls.
•
•
Select the desired sub-menu or feature.
Exit the menu by pressing
.
Tip: You can block/restore sound going to the other parties on this call by
Review the Calls Log
1. In Standby mode, press Main Menu
pressing the Mute Unmute soft key. This can reduce noise on
/
, then select
conference calls.
Calls. The following Calls logs and options appear in the
display:
You can enable/disable Speakerphone mode by pressing and holding
. Speakerphone mode enables you to conduct a call hands-free and
to share a call with other people nearby. (For more information, refer to
• Outgoing Calls
• Incoming Calls
• Missed Calls
• All Calls
Ignoring a Call
When you ignore an incoming call, the call is immediately
forwarded to your voice mail.
• Call Timer
ᮣ
During an incoming call, press the Ignore soft key. The
• Data Counter
caller is forwarded to your voice mail.
2. Select the Calls log that you wish to review or the function
you wish to access.
21
•
•
•
•
Erase — Erase the selected call from your Outgoing call log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Outgoing call log.
Note: In cases where there is a Contacts match for a Calls log entry, the
name associated with the number appears in the display instead of the
number.
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
Outgoing Calls
Your phone retains information about the last 90 outgoing calls
and stores them in the Outgoing calls log. You can review the
Outgoing calls log for the time and date of a call, as well as other
information.
4. Press the Msgs soft key to launch the Send Message
menu. The following options appear in the display:
•
Text Message — Lets you send a Text message to the selected
number called.
Note: To quickly view your most recent calls, briefly press
in Standby
•
Picture Message — Lets you send a Picture message to the
selected number called.
mode. Up to 270 of your most recent outgoing, incoming, and missed
calls are listed on the screen.
1. At the Calls menu, select Outgoing Calls. A list of your
outgoing calls appears in the display.
5. Select the desired message type to compose a message.
2. Highlight a call, then press OPEN
to view the Name
Incoming Calls
of the called party (if in the Contacts list), the number
dialed, the time and date the call was placed, and the
duration of the call (in minutes and seconds).
Your phone retains information about the last 90 Incoming calls
and stores them in the Incoming call log. You can review the
Incoming call log for the time and date of the call, as well as
other information.
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
•
•
Save — Save the number to your Contacts.
1. At the Calls menu, select Incoming Calls. A list of your
Incoming calls appears in the display.
Details — Calls to Contacts Only — Shows the entry for the called
Contact.
Call Functions
22
2. Highlight a call, then press OPEN
to view the Name
Missed Calls
of the caller (if in the Contacts list), the originating number,
the time and date the call was received, and the duration
of the call (in minutes and seconds).
Your phone retains information about the last 90 missed calls
(calls that were never picked up) and stores them in the Missed
call log. You can review the Missed call log for the time and date
of the call, as well as other information.
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
1. At the Calls menu, select Missed Calls. A list of your
•
•
Save — Save the number to your Contacts.
missed calls appears in the display.
Details — Calls from Contacts Only — Shows the entry for the
calling Contact.
2. Highlight a call, then press OPEN
to view the Name
of the caller (if in the Contacts list), the originating number,
and the time and date the call was received.
•
•
•
•
Erase — Erase the selected call from your Incoming calls log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Incoming calls log.
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
•
•
Save — Save the number to your Contacts.
Details — Calls from Contacts Only — Shows the entry for the
calling Contact.
4. Press the Msgs soft key. The following options appear in
•
•
•
•
Erase — Erase the selected call from your Missed call log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Missed call log.
the display:
•
Text Message — Lets you send a Text message to the selected
number called.
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
•
Picture Message — Lets you send a Picture message to the
selected number called.
4. Press the Msgs soft key. The following options appear in
the display:
5. Select an option to perform its function.
23
•
•
Text Message — Lets you send a Text message to the selected
•
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls
number called.
Picture Message — Lets you send a Picture message to the
selected number called.
4. Press the Msgs soft key. The following options appear in
the display:
•
Text Message — Lets you send a Text message to the selected
number called.
5. Select an option to perform its function.
•
Picture Message — Lets you send a Picture message to the
selected number called.
All Calls
You can review all of the calls log entries (outgoing, incoming,
and missed calls) for the time and date of a call, as well as other
information.
5. Select an option to perform its function.
1. At the Calls menu, select All Calls. A list of all logged calls
Call Timer
appears in the display.
View the duration of your last call, total calls, and calls made
during the life cycle of you phone using the Call Timer feature.
2. Highlight a call, then press OPEN
to view further
information about the call.
3. Press the Options soft key. A pop-up menu containing the
Note: Call Timer is not for billing purposes.
following options appears in the display:
•
•
Save — Save the number to your Contacts.
1. At the Calls menu, select Call Timer. The following timers
appear in the display:
Details — Calls from Contacts Only — Shows the entry for the
calling/called Contact.
•
•
Last Call — View the duration of your last call.
•
•
•
Erase — Erase the selected call from your Calls log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Calls log.
Outgoing Calls — View the duration of the total outgoing calls
made on your phone since the last erasure.
Call Functions
24
•
•
•
Incoming Calls — View the duration of the total incoming calls
Note: Data Counter is not for billing purposes.
received on your phone since the last erasure.
Roaming Calls — View the total calls duration on your phone
while roaming since the last erasure.
1. At the Calls menu, select Data Counter.
The following options appear in the display:
All Calls — View the duration of the total call, incoming, outgoing,
and data calls made on your phone since the last erasure.
•
•
•
Transmit — View the total amount of data transmitted by your
phone since the last reset.
•
•
Last Reset — View the time and date all timers were last reset.
Received — View the total amount of data received by your phone
since the last reset.
Lifetime Calls — View the duration of all calls since your phone
was activated.
Total — View the total amount of data sent or received by your
phone since the last reset.
2. To reset a selected counter (except Last Reset and Lifetime
Calls), highlight the desired counter and press the Reset
soft key.
•
•
Last Reset — View the time and date all timers were last reset.
Lifetime Data Counter — View the total amount of data sent or
received by your phone since activation (Lifetime Data Counter
cannot be reset).
3. To reset all counters except Lifetime Calls, press the Reset
All soft key.
2. To reset a selected counter (except Last Reset and Lifetime
Data Counter), highlight the desired counter and press the
Reset soft key.
4. To exit the Call Timer list, press
or
.
Note: Although most call timers can be erased, the Lifetime call timer can
never be erased.
3. To reset all counters except Lifetime Data Counter, press
the Reset All soft key.
Data Counter
4. To exit the Data Counter list, press
or
.
View the amount of Transmit data, Receive data, and Total data
transmitted or received since the last time you reset the data
counters, and the Lifetime amount of data transmitted or
received.
Note: Although most data counters can be erased, the Lifetime Data Counter
can never be erased.
25
Roaming
What is Roaming?
Roaming lets you use your r351 phone when you travel outside of
your Wireless Provider’s coverage area. The Roaming icon
(
) appears in the top line of the display when Roaming is
active, and extra charges may apply when making or receiving
calls.
Note: Some features may be unavailable while roaming. Roaming also
consumes additional power from the battery requiring more frequent
recharging. Contact your Wireless Provider for more information about
Roaming.
How Roaming Works
Roam Option lets you set roaming preferences if you move in and
out of your home network. The following roaming options are
available:
•
Home only — Your phone is available for normal operation only in the
designated coverage area.
•
Automatic — Your Wireless Provider’s Preferred Roaming List (PRL) of
networks is used to acquire service. If no preferred networks are
found, any digital system is acquired.
Call Functions
26
Section 4: Menu Navigation
This section explains the menu navigation for your phone. It also
includes an outline of all the available menus associated with
your phone.
Return to the Previous Menu
•
Press the Right soft key Back to return to a previous menu.
•
When Back does not appear in the display, press
to return to the
Menu Navigation
previous menu.
Navigate Using a Shortcut
You can also access menus and sub-menus using menu
Access the menus and sub-menus in your phone using the
navigation key (
) and soft keys (
), or use a shortcut.
1. In standby mode, press Main Menu
. The first of
numbers. After pressing Menu
, press the menu number to
several menus appears in the display.
go directly to the menu or sub-menu of your choice. Before you
can navigate using a shortcut, you’ll need the menu or sub-menu
number that you wish to access.
Note: More than one menu may appear in your display. This setting can be
modified in the Display/Menu Style menu.
1. In standby mode, press Main Menu
.
2. Press the number of the menu, sub-menu, and so on for
Tip: You can launch any of the Main Menus by using a voice command — In
standby mode, press the Voice Command key ( ). The phone prompts,
“Say a command.” Say “Go to” followed by a Main Menu name into
the microphone. For example, Say “Go to Messages” to access the
Messages menu.
the feature that you wish to access.
Example: Press Main Menu
, then press
,
. This takes you to the
Tools menu (Menu 9), and then to the Alarm Clock (sub-menu 3).
2. Use the navigation key to browse through the menus.
3. To enter the menu or sub-menu that appears in the
display, press
.
4. Press the Back soft key to return to the previous menu.
27
Section 5: Understanding Your Contacts
This section explains how to manage your daily contacts by
storing their name and number in your Contacts. Contacts entries
can be sorted by name.
2. Select the Contacts sub-menu or option of your choice.
Tip: You can also access a sub-menu or menu option by pressing the
number key corresponds to the menu item number. For example, press
Your Contacts List
for Add New Contact.
Your Contacts list can store up to 1000 entries, with each contact
having up to five associated phone numbers, one E-mail address,
and a picture ID.
Adding a New Contacts Entry
You can add an entirely new entry to your Contacts list or add
information to an existing entry.
Each phone number can be up to 32 digits in length, including
hard pauses and 2-sec pauses. Contact names can be up to 32
characters in length. You can also specify a memory location for
each entry, and you can restrict access to the Contacts list to
prevent unauthorized use.
Using the Add New Contact Option
1. In standby mode, press Main Menu
, then select
Contacts Add New Contact. The Add New Entry screen
➔
appears in the display with the Name field highlighted.
Open Your Contacts List
1. In standby mode, press Main Menu
2. Enter a name or phrase to associate with the type using
, then select
Contacts. The following Contacts sub-menus and options
appear in the display:
3. Use the Up and Down navigation keys to highlight each
field.
• Find — Find a phone number by entering a Contact name.
4. Enter a phone number (Mobile
,
Home
,
Work
,
Pager, or Fax
)
• Add New Contact — Add a number or E-mail to your Contacts.
• Speed Dial — Assign speed dial numbers to your Contacts.
• Group — Rename one of your five Contacts groups.
or an Email address (Email) for the new Contacts entry.
• Memory Info — View available memory for dial entries.
Understanding Your Contacts
28
5. If desired, assign the new Contact to a Group. This lets you
send messages to and find this Contact and other related
3. Highlight the number you wish to store in Contacts.
4. Press the Options soft key. The following options appear in
the display:
• Save — Saves the selected number to your Contacts list.
6. If desired, select a unique Ringtone to identify this new
• Erase — Deletes the selected number from the selected Calls log.
• Lock / Unlock — Prevents/allows deletion of the selected number.
• Erase All — Deletes all numbers from the selected Calls log.
7. If desired, select an identifying image by highlighting the
photo ID field and pressing the Set soft key. The My Images
screen appears in the display. (For more information, refer
• View Timer — Shows the call times for the Last Call, All Calls,
Incoming Calls, Outgoing Calls, Roaming Calls, Last Reset, and
Lifetime Calls timers for the selected Calls log.
5. Select Save. The following options appear in the display:
press OK
.
• Create New — Lets you create a new Contacts entry.
8. Press SAVE
to save the new Contacts entry.
• Update Existing — Lets you add the number or E-mail address
you just entered to an existing Contacts entry.
Storing Number from a Calls Log
Creating a new Contacts entry
You can store numbers from the Calls logs to your Contacts.
1. In standby mode, press Main Menu
Calls
, then select
6. Select Create New. The following (number type) icons
.
appear in the display:
2. Select from the following Calls logs:
• Outgoing Calls
Mobile
Pager
Home
Fax
Work
• Incoming Calls
• Missed Calls
• All Calls
A list of your calls appears in the display.
29
7. Select the number type that matches your new entry. The
New Contact screen appears in the display with the
number being save populating the selected number type
field. (For more information on creating a new Contacts
12. Make any added changes you wish to the Contacts entry.
13. Press SAVE
to save the entry.
Finding a Contacts Entry
Voice Method
Adding the number to an existing Contacts entry
Use the VoiceSignal Contacts command to view contact
information for any named contact stored in your Contacts list by
saying the name.
8. Use the navigation keys
to highlight Update Existing,
then press . The Update Existing screen appears in
the display showing your current Contacts list.
9. Enter the first few characters of the Contacts entry name
Note: The Contacts command shows the requested contact information in
under which you will store the saved number. (For more
the display but does not dial any phone numbers for the contact.
To look up information for a specific contact:
1. In standby mode, press and hold
for Voice Service.
10. Select the desired Contacts entry. The following (number
type) icons appear in the Update Existing screen:
“Say a Command” appears in the display and is
pronounced through the speaker.
Mobile
Pager
Home
Fax
Work
2. Say “Lookup”.
VoiceSignal prompts you to “Say the name or #.”
3. Speak clearly and say the full name of the person you want
to call, exactly as it is entered in your contact list.
11. Select the appropriate unassigned number type. The Edit
•
If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
Contact screen appears in the display.
Understanding Your Contacts
30
•
If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “Did you say?” followed by the first name on the list.
Example: If you saved a contact name as “Robert Smith”, begin your search
for that contact by pressing for “R”.
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
Note: As you enter letters, the entry names of the closest matches (thus far)
appear in the display.
3. When the desired Contacts entry is listed in the display,
highlight the contact using the navigation keys (if
necessary). Then, do one of the following
•
•
To say the name again, press the Repeat soft key.
To exit VoiceSignal without dialing, press
.
•
To dial the number associated with the named Contact,
press
5. The contact information for the name you selected appears
.
in the display.
•
To change the information about the contact, press the Edit soft
Keypad Methods
Find by Name
key.
•
•
To show information about the contact, press VIEW
.
If you have stored a named contact in your Contacts list, Find lets
you locate the entry quickly.
To access other options, press the Options soft key. The following
options appear in the display:
1. In standby mode, do one of the following:
–
New Contact — Lets you add a new number to your Contacts list or to
the selected contact.
•
•
Press the Right soft key (Contacts Find shortcut).
Press Main Menu , then select Contacts
–
–
Erase — Lets you delete the highlighted contact.
➔
Find.
Send Message — Lets you send a text or picture message or an
email to the selected contact.
The FIND screen appears in the display with an
alphabetical list of Contacts showing.
–
–
Call — Lets you place a call to the highlighted contact.
2. Enter the first few characters of the name of the contact as
Send Name Card Via Bluetooth — Lets you send a Name Card
containing the selected Contact’s information to another Bluetooth
device.
it appears in your Contacts list.
31
Group
or area code and exchange — for example, 888-987).
2. Press the Options soft key. The following menu options
This option lets you find a Contacts list entry with a specific
Group name.
appear in the display:
• Search — Lets you find Contacts list entries by their phone
1. In standby mode, press Main Menu
, then select
numbers.
Contacts
➔
Group. The Group List screen appears in the
• 2-Sec Pause — Adds a two-second pause.
display.
• Wait — Adds a hard pause (awaits input from you).
2. Select the group you wish to browse. The selected Group
• Send Txt Msg
—
Lets you send a text message or an email to the
list appears in the display.
selected contact.
3. Highlight the desired Contacts entry, then do one of the
• Send Pic Msg
selected contact.
—
Lets you send a picture message or an email to the
following:
•
•
•
To delete the selected contact from the Group, press the Remove
3. Select the Search option. The FIND screen appears in the
display listing all phone numbers in your Contacts list that
contain the entered digits.
soft key. (Does not apply to the General group.)
To add an existing contact entry to the selected Group, press
ADD
. (Does not apply to the General group.)
4. Highlight the desired Contacts entry. Then do one of the
To send a text or picture message or an email to selected Contact(s)
following:
in the current Group, press the Options soft key and select Send
Message
.
•
•
To dial the highlighted number, press
To display information about the Contacts entry associated with the
highlighted number, press OK . From the View Contact
screen, you can erase or edit the selected Contacts entry.
.
4. Select the desired option to enter that option’s sub-menu.
Search by Number
This option allows you to find a Contacts list entry by searching
on one of the contact’s phone numbers.
Editing an Existing Contact Entry
Once stored in the Contacts, an entry can be changed quite
easily.
1. In standby mode, enter the first few numbers of the
Contacts list entry you wish to find (such as the area code
Understanding Your Contacts
32
Tip: You can enter multiple two-second pauses to extend the length of a
pause. For example, two consecutive two-second pauses cause a total
pause time of four seconds.
2. Press the Edit soft key. The Edit Contact screen appears in
the display with the contact name highlighted.
Note: Keep in mind that pauses count as digits towards the 32-digit
maximum.
3. Highlight a number stored in this contact entry.
4. To backspace and delete numbers, press
.
Store Pauses in a New Contacts Entry
5. To clear all numbers in the highlighted field, press and hold
1. In standby mode, enter the number you wish to store (such
.
as your bank’s teleservice number).
2. Press the Options soft key.
Note: You can also add numbers to the entry, assign it to a Group, and add
other information.
The following menu options appear in the display:
• Search — Lets you find Contacts list entries by their phone
6. When you’re finished editing the entry, press SAVE
Your changes are saved and a confirmation message
appears in the display.
.
numbers.
• 2-Sec Pause — Adds a two-second pause.
• Wait — Adds a hard pause (awaits input from you).
Adding Pauses to Contacts Numbers
• Send Txt Msg
—
Lets you send a text message or an email to the
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
entered number.
• Send Pic Msg
—
Lets you send a picture message or an email to the
entered number.
store the numbers in your Contacts along with special characters
called pauses.
3. Select the pause option of your choice to enter the
highlighted pause into your number sequence.
•
•
Wait — Adds a hard pause (awaits input from you).
2-Sec Pause — Adds a two-second pause.
33
4. When you’re finished entering the number and pauses,
7. When you’re finished entering pauses, press
to
press the Save soft key to store the number in your
save your changes to the number in your Contacts list.
Contacts
.
Assigning Speed Dial Numbers
Add Pauses to an Existing Contacts Entry
When you add or edit an entry to the Contacts list, you have the
option of assigning a Speed Dial number using the Options pop-
up menu or of returning to the Contacts menu and using the
Speed Dial option. You can also change a contact’s Speed Dial
number.
2. Press the Edit soft key. The Edit Contact screen appears in
the display with the contact name highlighted.
1. Find and highlight the desired entry in the Contacts list.
3. Highlight a number stored in this contact entry.
4. Use the Left and Right navigation keys to place the cursor
where you want to add a pause (usually at the right-hand
end of the number).
2. Press the Edit soft key. The Edit Contact screen appears in
the display with the Contact name highlighted.
5. Press the Options soft key. The following menu options
3. Highlight a number stored in this Contact entry.
appear in the display:
Note: If a Contact has more than one stored number (such as Home and
Office), you can select which of these numbers your phone will dial
when you speed dial that Contact.
• Set Speed Dial Remove speed dial — lets you assign or remove
/
a Speed Dial number for this Contacts entry.
• Set as default — your phone automatically dials this number when
you find this Contacts entry and press the
key.
4. Press the Options soft key. The following menu options
appear in the display:
• Wait — Adds a hard pause (awaits input from you).
• Set Speed Dial Remove speed dial — lets you assign or remove
/
• 2-Sec Pause — Adds a two-second pause.
a Speed Dial number for this Contacts entry.
6. Select the pause option of your choice to enter the
• Set as default — your phone automatically dials this number when
highlighted pause into your number sequence.
you Find this Contacts entry and press
.
Understanding Your Contacts
34
• Wait — Adds a hard pause (awaits input from you).
5. Press
to add the number or Email address to the
existing entry.
• 2-Sec Pause — Adds a two-second pause.
Edit an Existing Email Address
5. Select Set Speed Dial / Remove speed dial. The Speed Dial
screen appears in the display. (If a speed dial number has
been set previously, you can remove it by pressing
If none has been set, continue with the next step.)
.
6. Select an unassigned Speed Dial number to assign it to the
selected Contact. You are prompted to confirm the
assignment.
2. Press the Edit soft key. The Edit Contact screen appears in
the display with the contact name highlighted.
3. Highlight the Email field (labeled with the @ symbol).
7. Press the Yes soft key to assign the selected Speed Dial
number. The Edit Contact screen appears in the display.
8. Press
assignment.
to save the new Speed Dial number
•
To add the domain type to the end of the Email address, do the
following:
Add a Number or Email Address to an Existing Entry
–
Press the Left soft key. A pop-up menu appears in the display with Abc
highlighted.
–
–
Highlight Shortcuts, then press
.
Select the desired domain type (such as, .com, .net, or .edu) to add to
the Email address.
2. Press the Edit soft key. The Edit Contact screen appears in
5. Press
to save your changes.
the display with the contact name highlighted.
Speed Dial Numbers
3. Highlight a number field or the Email field in this Contacts
You can assign and change Speed Dial numbers for Contacts
entries.
entry.
4. Enter the phone number or E-mail address for the new
Contacts entry.
35
1. In standby mode, press Main Menu
, then select
• Friends
Contacts
display.
➔
Speed Dial. The Speed Dial list appears in the
2. Highlight the Group (other than General) that you wish to
rename, then press the Options soft key and select
Rename
.
Tip: You can also assign a Speed Dial number when creating or editing a
3. The Rename Group screen appears in the display. The
current name of the selected Group shows with a flashing
cursor at the end of the name.
2. Highlight a Speed Dial number.
3. Press SET
. The Set Speed Dial screen appears in the
display.
5. Press
to save the changed group name.
4. Enter or highlight a Contact entry, then press
. You
Deleting a Contacts Entry
are prompted to confirm the new Speed Dial setting.
1. Find and highlight the desired entry in the Contacts list.
5. To save the new setting, press the Yes soft key. To discard
the new setting, press the No soft key.
Renaming a Contacts Group
Use this option to rename a Group in your Contacts list.
2. Press the Options soft key and select Erase. The phone
prompts you to confirm the erasure.
1. In standby mode, press Main Menu
, then select
3. To erase the selected Contact entry, press the Yes soft key.
Contacts Group. A list of Group names (like the following
➔
To keep the selected Contact entry, press the No soft key.
list) appears in the display:
• No Groups
Sending a Contacts Entry
Use the Send Name Card With Bluetooth option to send one or
more selected Contacts entries to another, compatible phone or
other device over a Bluetooth connection.
• Business
• Colleague
• Family
Understanding Your Contacts
36
1. Find and highlight the desired entry in the Contacts list.
Contacts
➔
Memory Info. The amounts of memory used
and remaining for Contacts entries appear in the display.
2. Press the Options soft key, then select Send Name Card Via
Bluetooth. The Send Via Bluetooth screen appears in the
display with the highlighted Contacts entry marked.
3. Highlight another Contacts entry you wish to send and
press MARK
to mark the entry for sending. Repeat
this step for all other Contacts entries you wish to send.
4. When you have marked all the entries you wish to send,
press the Done soft key. The Choose device screen
appears in the display.
5. Use the Up and Down navigation keys to highlight the name
of the receiving device, then press
. Your phone
automatically connects with the other device and sends
the selected Contact entries.
Memory Info
Use the Memory sub-menu to view the amount of Contacts
entries you have stored, as well as the remaining memory.
ᮣ
In standby mode, press Main Menu
, then select
37
Section 6: Messaging
–
Recent Calls
This section explains how to create, send, receive, and view
different types of messages. This section also describes the
features and functionality associated with messaging.
Select Contacts. The Add Contacts screen appears in the display.
Creating and Sending New Messages
This section guides you through procedures for creating and
sending text and pictures.
Highlight a Contact. Use the Left and Right navigation keys to highlight a
phone Number or E-mail address for the highlighted Contact. Press
MARK
to mark your selection.
Creating and Sending a Text Message
1. In standby mode, press the Messages soft key, then select
To add the selected contacts to the To list, press the Done soft key.
The Create Text Msg screen appears in the display showing the
populated To list.
Send Message
➔
Text Message. The Create Txt Msg screen
•
To enter recipient E-mail address(es), press
key to change the
appears in the display showing the To list.
text entry mode from 123/Sym to abc. Or, press the 123/Sym soft
key and select the text entry mode you want. (For more information,
Tip: You can also access Messages by pressing Main Menu
and select
Messages
.
3. When you are finished addressing your message, press
2. Address your message by selecting contacts and/or
entering number(s) or E-mail address(es) of message
recipient(s):
. The Text field appears in the display.
•
To select a mobile number or E-mail address using your Contacts
list, press the Add soft key. The following options appear in the
display:
5. At any point while composing a message, you can set
message send options by pressing the Options soft key.
–
–
Contacts
Groups
Messaging
38
6. Once you’re finished composing your message, press
SEND to send your message.
7. To set message send options, press the Options soft key.
Creating and Sending a Picture Message
1. In standby mode, press the Messages soft key, then select
8. To add a picture to the message, highlight the Picture field.
•
Press the Picture soft key to access the picture gallery. If there are
no pictures in the gallery, press the Camera soft key to launch the
camera, then take a picture. With pictures in the gallery, thumbnail
images appear in the display. Then, do the following:
Send Message
➔
Picture Message. The Create Pic Msg
screen appears in the display showing the To list.
Tip: You can also access Messages by pressing Main Menu
and select
–
–
Highlight a picture in the gallery.
Messages
.
To expand the highlighted picture to fill the display, Press the View soft
2. Address your message by selecting contacts and/or
entering number(s) or E-mail address(es) of message
key.
–
To activate the phone’s camera and take a new picture, Press the
9. Once you have highlighted a photo, press
. The
3. After addressing your picture message, the Subject field
Create Pic Msg screen appears in the display with the
selected photo in the Picture field.
becomes highlighted.
The Sound field becomes highlighted.
10. To add a sound file to your message, press the Sounds soft
key. The Record New option and a list of sound files appear
in the display with the Record New option highlighted.
5. Press the Down navigation key. The Text field becomes
highlighted.
11. Record a new sound file or select a listed sound file.
•
If you select the Record New option, the Record New screen
appears in the display. Press REC to begin recording.
39
•
•
Wait for the beep, then start speaking. As it is recording the phone
displays a countdown timer that shows the seconds remaining for
the recording.
3. Using the display as a viewfinder, when the image that you
–
To pause the recording, press the Pause soft key. When a memo is
wish to send appears in the display, press TAKE
take a picture.
to
paused, press the Resume soft key to continue recording.
–
To stop recording, press SAVE
. The Record New option and a
list of sound files appear in the display with the Record New option
highlighted.
Note: For more information about using the camera feature in your phone,
Select your new sound file. The Create Pic Msg screen reappears
in the display with your selected sound file in the Sound field.
4. Press Send
to save the picture and begin delivery
process. The Create Pic Msg screen then appears in the
12. Once you’re finished composing your picture message, do
display with the To: list showing.
one of the following:
•
•
Press SEND
to send the message.
5. Enter the phone number or E-mail address of the recipient
of the Picture message, then press
.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts
Groups Recent Calls and Online Album. These options allow you to find
and add recipients to the To: list.
,
Send Picture Messages in Camera Mode
,
Picture messages can be sent to recipients with compatible
phones or devices. You can even accompany a Picture message
with a voice memo or preloaded sound.
6. The Subject field appears in the display. Enter a subject for
the Picture message using the keypad. (For more
Tip: You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate To field of the Picture
message composer.
7. Press the Down navigation key until the Text field is
highlighted, then enter the message text using the keypad.
1. In standby mode, press and hold the Camera key (
).
Messaging
40
8. Your new picture appears in the Picture field.
Message Send Options
9. If you wish to insert a sound into your Picture message,
use the Down navigation key to highlight the Sound field
and do the following; otherwise, proceed to step 10.
You can set priority, validity, and other options before you send a
message. Which options appear in the Send Options list depends
on what type of message you have composed and what message
field you have highlighted.
•
Press the Sounds soft key. The My Sounds screen appears in the
display showing the following options:
1. After you’ve composed a Text or Picture message, press
the Options soft key. The following are Send Options that
may appear in the display depending on the message type:
–
Record New — Record a new memo to insert into the message.
Note: You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
• Edit Send To — Lets you add, delete, or change numbers or
E-mail addresses in a Text message To: list.
• Preview — Lets you view a Picture message as the recipient will
see it.
–
Audio files list — Select from the list of previously recorded voice
• Add Quick Text — Lets you add Quick Text to a Picture message.
memos and preloaded audio files on your phone.
Select the desired option to insert a sound into your message.
• Save As Draft — Saves this message in the Drafts folder.
10. Press the Options soft key to complete the message text
and set message send options. For more information, refer to
• Priority Level — Lets you assign a Urgent, Normal, or Low
(picture messages only) priority to the message.
• Validity Period — Lets you set a Date and Time when this
message will no longer be available to the recipient. After the set
period of time, your message is recalled.
11. Highlight an option, then press
to invoke it.
12. Press to send the message. “Connecting...
”
• Deferred Delivery — Lets you set a Date and Time when this
message will be delivered.
followed by “Sending Message” appear in the display and a
progress bar indicates the send status.
• Enh. Delivery Ack — Set to On to be alerted when your message
is received by the addressee.
• Remove Picture — Removes the picture from a Picture message.
41
Copy, Save Quick Text, Lock/Unlock, Add To Contacts, Extract, and
Message Info.
• Remove Sound — Removes the sound file from a Picture
message.
–
View Later — Closes the popup and saves the message to your inbox
where you can view it later.
• Add To Contacts — Lets you add the addressee numbers or
E-mail addresses to your Contacts list.
2. Select a desired option and a value for that option. You’re
Select the desired option.
returned to the Create Msg screen.
Receive Messages While in a Call
Receiving New Messages
When you receive a message in standby mode, one of the
following occurs:
When you receive a message while in a call, one of the following
occurs:
•
If Auto View and Auto Scroll are both set to On — The message text
automatically appears in the display and scrolls slowly to the end of
•
•
•
If Message View is set to Chat — The message automatically
appears in the display and is followed by other messages received
•
A
New Message notification appears in the display along with the
closed envelope icon ( ). The date and time of the message and the
following options also appear in the display:
If Auto View and Auto Scroll are both set to On — An alert sounds
(unless turned off) and the message text automatically appears in the
display and scrolls slowly to the end of the message. (For more
If Auto View is set to Off — An alert sounds (unless turned off) and a
New Message notification appears in the display along with the
–
View Now — Opens the message. The following options may be
available depending on the type of message that it is: Erase, REPLY,
Forward, Reply With Copy, Save Quick Text, Lock, Add to Contacts,
Message Info, Extract, View Last Message, and Add To Contacts.
View Later — Closes the popup and saves the message to your inbox
where you can view it later.
closed envelope icon (
). The date and time of the message and the
–
following options also appear in the display:
–
View Now — Opens the message. The following options may be
available depending on the type of message that it is: Erase, REPLY,
Forward, Go To URL, Save Picture, View Last Message, Reply With
Select the desired option.
Messaging
42
Voicemail
Message Folders
Voicemail allows callers to leave voice messages in your voice
mailbox, and lets you review, play, and delete your voice
messages any time you are in your Carrier’s network coverage
area.
Inbox
Received messages of all types (except Voicemail) are stored in
the Inbox.
1. In standby mode, press the Messages soft key, then select
Voice Mail Setup
Inbox, to open the Inbox folder.
Before callers can leave voice mail messages, you must first set
2. Highlight a message, then do one of the following:
•
•
To delete the message, press the Erase soft key.
To view the highlighted message, press OPEN
proceed to Step 3.
then
Checking your Voicemail
1. In standby mode, press and hold
•
To access other options, press the Options soft key. The following
options appear in the display:
until you’re
–
–
Reply — Lets you compose and send a message to the sender.
connected to your Wireless Carrier’s voicemail system. A
recorded message prompts you for a password.
Reply With Copy — Text Message only — Lets you reply to a
message and include a copy of the original message.
2. Enter your password, then follow the recorded prompts, to
listen to your voice message(s), change administrative
options, and so on.
–
Forward — Lets you forward the message to other E-mail addresses
or mobile phone numbers.
–
–
Lock Unlock — Blocks or allows erasure of the selected message.
/
Add To Contacts — Lets you add the addressee numbers or E-mail
addresses to your Contacts list.
Tip: You can also access your voice mail by selecting an entry in the
Voicemail folder.
–
–
Erase Multiple — Deletes selected/all unlocked messages from the
Inbox folder.
Message Info — Lets you display status information about a
message.
43
Select an option to perform the function for that option.
To return to the Messages menu, press
3. While viewing a selected message, do one of the following:
Select an option to perform the function for that option.
To return to the Inbox list, press
•
.
•
.
Messages and Lock Mode
•
•
To delete the message, press the Erase soft key.
Your phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code. (For
To compose and send a message to the sender of the highlighted
message, press REPLY
.
•
Press the Options soft key, The following options may appear in the
display depending on the message type:
Outbox
–
–
–
–
–
Play Again — Picture Messages only — Replay a sound file included
with a message.
Your phone stores outgoing messages in the Outbox, regardless
of whether the message was successfully sent to, or received by,
the addressee.
Forward — Lets you forward the message to other E-mail addresses
or mobile phone numbers.
Reply With Copy — Text Message only — Lets you reply to a
message and include a copy of the original message.
Tip: Verify whether and when a message or E-mail was successfully
Save Picture — Picture Messages only — Saves a copy of the image
included in the selected message to the images Gallery.
Save Sound — Picture Messages only — Saves the sound file in the
1. In standby mode, press the Messages soft key, then select
Outbox. A list of your outgoing messages appears in the
display.
message to the My Sounds gallery.
–
–
–
Save Quick Text — Saves the message text as a Quick Text entry.
Lock Unlock — Block or allow changes to the selected message.
/
2. Highlight a message, then do one of the following:
Add To Contacts — Lets you add the addressee numbers or E-mail
addresses to your Contacts list.
•
•
To delete the message, press the Erase soft key.
–
–
Message Info — Lets you display status information about a
message.
To view the highlighted message, press OPEN
proceed to Step 3.
then
Extract — Lets you call the originator of the highlighted message.
Messaging
44
–
–
–
–
Lock Unlock — Block a message from being erased or free a
message to be erased.
/
•
Press the Options soft key. The following options appear in the
display:
Add To Contacts — Lets you add the addressee numbers or E-mail
addresses to your Contacts list.
–
–
–
Forward — Send the message to another addressee.
Resend — Re-send the message.
Message Info — Lets you display status information about picture
messages.
Lock Unlock — Block a message from being erased or free a
/
message to be erased.
Extract — Lets you call the originator of the highlighted message.
–
Add To Contacts — Lets you add the addressee numbers or E-mail
Select an option to perform the function for that option.
To return to the Outbox list, press
addresses to your Contacts list.
–
–
Erase Multiple — Erase all messages in the Outbox folder.
•
.
Message Info — Lets you display status information about picture
Drafts Folder
messages.
Messages in the Drafts folder are those that have been
composed but never sent. You can return to the Drafts folder at
any time to view, edit, or send a draft message.
Select an option to perform the function for that option.
To return to the Messages menu, press
3. While viewing a selected message, do one of the following:
•
.
1. In standby mode, press the Messages soft key, then select
•
•
To delete the message, press the Erase soft key.
Drafts. A list of your draft messages appears in the display.
To resend a message to the original addressee, press
2. Use the navigation keys to highlight the message that you
RESEND
.
wish to edit, then do one of the following:
•
Press the Options soft key. The following options may appear in the
display depending on the message type:
•
•
To delete the message, press the Erase soft key.
To view the highlighted message, press EDIT
to edit the desired fields.
then proceed
–
Play Again — Picture Messages only — Replay a sound file included
with a message.
•
Press the Options soft key. The following options appear in the
display:
–
–
Forward — Send the message to another addressee.
Erase — Picture Messages only — Delete the message from the
–
Send — Send the message to the current addressee(s).
Outbox folder.
–
Save Quick Text — Save the message text in the Quick Text folder.
45
–
–
Lock Unlock — Block a message from being erased or free a
message to be erased.
/
folder to view the Callback # (if available), Urgency, and other
details of new voicemail messages.
Add To Contacts — Lets you add the addressee numbers or E-mail
addresses to your Contacts list.
1. In standby mode, press the Messages soft key, then select
Voicemail. A Voicemail status screen indicating the number
of new messages in your voice mailbox, their urgency, and
any callback numbers appears in the display.
–
–
Save Quick Text — Save the message text in the Quick Text folder.
Erase Multiple — Erase all messages in the Drafts folder.
Select an option to perform the function for that option.
2. Press
to call your voice mailbox and listen to your
•
To return to the Messages menu, press
.
voice messages.
3. If you press EDIT
in the Text screen/field, do one of
Note: You can, in standby mode, also press and hold
to dial your voice
the following:
mailbox.
•
To change text options, press the Left soft key. (For more
Erasing Messages
You can erase all of the messages in each/all of your message
folders from one convenient location.
•
•
To send the message, press SEND
.
4. Once you’re finished composing your message, do one of
Note: This function erases all messages in a selected message folder or in
all message folders. To delete a single message, from the Messages
menu, open the message folder where the message to be deleted is
stored, then select and delete the message from the Option menu
while viewing the message content.
the following:
•
•
To send the message, press SEND
.
To exit the message, press
. You are prompted to save your
changed message to the Drafts folder.
1. In standby mode, press the Messages soft key, then select
Erase Messages. The following options appear in the
display:
Voicemail
New voice messages in your voice mailbox are logged in the
Voicemail folder of the Messages menu. Open the Voicemail
• Inbox — Lets you delete all messages from your Inbox.
Messaging
46
• Outbox — Lets you delete all messages from your Outbox.
General Message Settings
• Drafts — Lets you delete all draft messages from the Drafts folder.
1. In standby mode, press the Messages soft key, then select
Msg Settings
the display:
➔
General. The following options appear in
• All Messages — Lets you delete all messages from all message
folders.
• Auto Save — Lets you set whether to automatically save to the
Outbox folder, to discard, or to prompt you to save unsent
messages when you exit them.
2. Select the folder containing the messages that you wish to
delete. You are prompted to confirm the erasure of all
messages in that folder.
• Auto Erase — Automatically erase the oldest read message after
3. To cancel deleting any messages, press the No soft key. To
delete all messages from the selected folder, press the Yes
soft key.
memory is full.
• Quick Text — Lets you change pre-composed text or compose
text for addition to your outgoing messages.
Message Settings
The Msg Settings options let you define numerous message
settings such as ringer types and save options.
• Voicemail # — Lets you update your Voicemail access number.
• Entry Mode — Lets you set the default text entry mode T9word,
T9Word, T9WORD, abc/Abc/ABC (letters), or 123/Sym (numbers
and symbols) for composing message text.
1. In standby mode, press the Messages soft key, then select
Msg Settings. The following options appear in the display:
• General — Lets you set default option values for Text, Picture, and
Voice messages.
• Callback # — Lets you disable, enable, and update the callback
number that can be inserted in outgoing messages.
• Signature — Lets you disable, enable, and update the text
signature that can be inserted in outgoing messages.
• Text Message — Lets you set default message text option values
for both Text and Pic messages.
• Reminder — Lets you set the message receipt reminder to play
Once Every 2 Minutes, Every 15 Minutes, or not to play (Off).
,
• Picture Message — Lets you set default picture message option
values.
2. Select the desired option to change the selected message
settings.
2. Select the desired option to perform the function(s) for that
option.
47
Text Message Settings
1. In standby mode, press the Messages soft key, then select
2. Select Auto Receive to enter the sub-menu and change the
selected message setting.
3. Select Signature to enter the sub-menu and choose
Msg Settings
➔
Text Message. The following options
Custom to create a signature.
appear in the display:
• Auto View — Automatically view messages as they are received.
4. Press
to save your choices and return to the Picture Msg list.
• Signature: Lets you disable, enable, and update the text signature
that can be inserted in outgoing messages.
5. Press
to return to the Msg Settings menu.
• Auto Scroll — When set to On, the phone automatically scrolls
message text, letting you see the complete message text without
using the navigation keys.
• Message View — When set to Chat, all successive text messages
to or from a particular number, are displayed within a message.
2. Select the desired option to change the selected message
settings.
Picture Message Settings
1. In standby mode, press the Messages soft key, then select
Msg Settings
➔
Picture Message. The following option
appears in the display:
• Auto Receive — Lets you choose whether to be prompted to
retrieve picture messages from your provider’s E-mail server or to
automatically retrieve all picture messages as they are received by
the server.
• Signature— Lets you add a signature to your message.
Messaging
48
Section 7: Music Player
This section explains how to use your Music Player to:
information on available accessories, contact your Wireless
Carrier.)
•
•
Play individual music files.
Create, play, and manage Playlists of music files.
Launching the Music Player
This section also explains how to customize your Music Player to
suit your music playback preferences.
Note: Before launching the Music Player, you must install a microSD™
Finally, this section details how to load music files onto a
microSD™ Memory Card.
1. In standby mode, press Main Menu
, then select
Using Your Music Player
Multimedia ➔ Music Player. The Music Player screen
appears in the display.
You can use your Music Player to play music files that you have
transferred onto an optional microSD™ Memory Card using a
personal computer. (For information on loading music files on a
2. Press the Library soft key. The Library menu appears in the
display.
3. Select the All Library sub-menu. A list of music files saved
Your Freeform Music Player can play music in the following
Digital Audio Formats:
to your Memory Card appears in the display.
• Unprotected AAC and AAC+ • MP3 • WMA and WMA Pro
Your Music Player can play music through the phone’s speaker,
through stereo headphones, through a stereo headset (such as
the optional Samsung AAEP404), or through a stereo Bluetooth
headset (such as the optional Samsung SBH700 or SBH500.) (For
4. Select a music file and press the Play soft key. The Music
Player screen appears in the main display.
Using the Music Library
1. In standby mode, press Main Menu
, then select
49
Multimedia ➔ Music Player. The Music Player screen
4. Highlight a music file, then:
appears in the display.
•
•
•
To play the file, press the PLAY soft key.
2. Press the Library soft key. The Library menu appears in the
To select the file for playing or other options, press MARK
.
display showing the following options:
To select and apply any of the following options to the highlighted or
marked music file(s), depending on the displayed music file list,
press the Options soft key:
Tip: You can also access the Library menu from the Music Player screen by
pressing the Library soft key.
Note: Not all options listed below will appear. It depends on which option you
• Now Playing — Music Player mode only — Indicates number of
music files currently playing. Select this option (or press the Back
soft key) to return to the Music Player screen.
choose from the Library menu.
–
–
–
–
Mark All/Unmark All — Marks or Unmarks all music files.
Erase — Erases the selected music file from your memory card.
Add to Playlist — Adds this file to a selected Playlist.
• All — Lists all music files on the Memory Card and lets you play
individual music files or play multiple music files by creating a
temporary music playlist.
Song Info — Lists the Title, Artist, Album, Genre, File Name, Encoding
• Artists — Lists artist names for music files on the Memory Card
and lets you play one or more music files by a selected artist.
Format, Bitrate, File Size, and Date of the highlighted music file.
Select the desired option.
• Albums — Lists album titles for music files on the Memory Card
and lets you play one or more music files from a selected album.
Music Player Controls
•
Volume key:
• Playlists — Lists any playlists you have saved and lets you create,
save, and manage playlists.
–
To play a music file louder, press the Volume key Up.
–
To play a music file softer, press the Volume key Down.
3. Select the preferred Library option. A list of music files,
•
Navigation key
:
artists, albums, or playlists appears in the display.
–
–
–
To pause/resume playing a music file, press
.
If a list of artists, albums, or playlists is showing, select the
preferred artist, album, or playlist. A list of music files
appears in the display.
To stop playing a music file, press the Down navigation key.
To skip play to an earlier music file in a Playlist, press the Left
navigation key. If not in a Playlist, rewind to beginning of music file.
Music Player
50
–
–
To skip play to a later music file in a Playlist, press the Right navigation
key. If not in a Playlist, fast-forward to end of music file.
To return to the selected list and choose another music file to play,
press the Up navigation key.
•
With your phone powered off, insert the Memory Card into your
•
•
Power your phone on.
When the Memory Card icon (
) appears in the display, remove
•
•
Library soft key — Returns you to the Library screen.
Options soft key — Shows the following sub-menus and options:
the Memory Card from your phone. (For more information, see
–
–
–
–
–
–
Play Mode — Lets you change the play mode from Normal, Shuffle,
Repeat One, or Repeat All.
Add to Playlist — Moves you to the Playlists menu to let you add a
selected music file to a playlist.
Remove From List — Deletes a selected music file from the Now
Playing list or the current Playlist.
Visual Supplements — Lets you change the Music Player visualization
to Simple View, Equalizer, Lyrics, or Album Art.
Memory Info — Displays the Memory Usage screen which lists
Memory Card usage and availability amounts.
Song Info — Lists the Title, Artist, Album, Genre, File Name, Encoding
Format, Bitrate, Duration, File Size, and Date of the selected music file.
2. Insert the Memory Card into a compatible card reader.
Note: Card readers vary. Follow the installation instructions included with
your card reader and personal computer.
3. Open the Memory Card reader drive and the “My_Music”
folder.
4. Drag or download music (MP3) files into the “My_Music”
folder.
5. Remove the Memory Card by following the removal
instructions for the Memory Card reader and for your
personal computer.
Select the desired option to launch the option or to access the sub-
menu.
6. Insert the Memory Card into your phone. (For more
Loading Music Files
Using an Optional Card Reader
Using an Optional Data Cable
To obtain a USB Data Cable compatible with your Freeform
phone, contact your Wireless Carrier.
1. Before loading music files on a microSD™ Memory Card,
do the following:
51
1. In standby mode, connect the smaller end of the Data
Cable to the Power-Accessory connector on your Freeform
phone.
Press the Options soft key, then select Add New Playlist
4. Enter a name for the playlist and press OK
5. Highlight and mark the songs you want to add to the
playlist by pressing MARK
.
.
2. Connect the larger (USB) end of the Data Cable to your PC.
.
“
Connected To PC” appears in the display. Your phone
6. Press Done when you are finished adding songs.
The playlist will be saved.
appears as a removable disk on your PC.
3. Copy or transfer your music files to the My Music folder on
Playing a Playlist
your phone.
1. In standby mode, press Main Menu
, then select
4. Press the Done soft key on your phone. You are prompted
Multimedia ➔ Music Player. The Music Player screen
appears in the display.
to confirm that you want to “Exit USM mode?
”
5. Press the Yes soft key. Your phone returns to standby
2. Press the Library soft key, then select Playlists. The
mode.
Playlists screen appears in the display.
6. Disconnect the Data Cable.
3. Highlight the desired playlist and press the Play soft key.
The Music Player screen appears in the display and a
music file begins playing.
Playlists
Adding a New Playlist
1. In standby mode, press Main Menu
, then select
Multimedia ➔ Music Player. The Music Player screen
appears in the display.
2. Press the Library soft key, then select Playlists. The
Playlists screen appears in the display.
3. Do one of the following:
Press the Add soft key (if the Playlists directory is empty)
– or –
Music Player
52
Section 8: Camera
Use your Freeform phone to take full color digital pictures,
display them on your phone’s vivid color display, and instantly
share them with family and friends. It’s fun, and as easy to use as
a traditional point-and-click camera. This section explains how
you can do the following:
2. The following options appear:
• TAKE — allows you to take a picture.
• My Images — allows you to view your pictures in the My
Images folder.
• Options — allows you to adjust the camera settings.
•
•
•
Take pictures with your phone’s built-in digital camera.
Send your pictures to others in Picture messages.
Set the several options associated with the camera that help you take
crisp, clear pictures.
3. Using the display as a viewfinder, point the camera lens
(on the back of your phone) at your subject.
4. When the image that you wish to capture appears in the
display, press TAKE
.
Taking Pictures
Taking pictures with the built-in camera is as simple as launching
the camera, choosing a subject, pointing the lens (located on the
back of your phone), and pressing a button.
5. To save the picture to memory, press the Save soft key.
To send the photo, press the Send soft key.
To erase the photo, press the Erase soft key.
Tip: You can change a number of the camera’s settings to suit particular
information.
Taking Snap Shots (Single Pictures)
To take a single picture using the current camera settings, do the
following:
Camera Screen Layout
1. In standby mode, press and hold the Camera key (
)
When you activate your phone’s camera, the top two lines of the
display are reserved for camera icons (when active). The center
of the display shows a viewfinder image of the subject at which
the camera is pointed.
on the right side of the phone.
Note: You can also activate the camera by pressing Main Menu
, then
selecting Multimedia ➔ Camera.
53
Camera Screen Soft Keys
Camera Options
The soft key labels on the bottom line of the display change to
the following:
The Camera Options let you temporarily adjust default camera
settings to suit available lighting, the subject of the photo, or the
purpose of the photo, for the current camera session. When you
exit the camera, your Camera Options values revert to their
default values.
•
•
•
My Images — Pressing the Left soft key opens the My Images
multimedia folder so you can view or manage your stored pictures.
TAKE — Pressing
takes a picture of the subject currently
appearing in the camera view finder screen.
Options — Pressing the Right soft key opens a menu bar of camera
options and settings.
To access Camera Options, do the following:
1. In camera mode, press the Options soft key. The Camera
Options menu appears in the display, containing sub-
menus.
Picture Options
2. Select a sub-menu, then select a preferred value.
After you take a picture, the following options are available (if
The following sub-sections describe camera options and
available values.
•
Save the picture by pressing the Save soft key.
Pictures are stored in the My Images folder, which is part of the
phone’s memory and/or card memory devoted to storing, browsing,
and viewing saved pictures.
Shot Type
Shot Type lets you take multiple photos or shots in succession at
the touch of a key and/or add colorful frames to your photos.
•
•
Send the picture to someone else by pressing Send
.
1. In camera mode, press the Options soft key, then highlight
Discard the picture by pressing the Erase soft key.
the Shot Type icon (
following values appear in the camera screen:
/
/
/
). The
If Auto Save is set to On, these options are not available. After
pressing TAKE , the picture(s) is (are) automatically saved,
and you are returned to the camera screen.
•
•
•
Single Shot — Lets you take 1 photo at a time.
Series Shot — Lets you take a series of 5 photos.
Mosaic Shot — Lets you take a mosaic photo of 4 or 9 shots
2x2 or 3x3).
(
Camera
54
•
Fun Frames — Lets you select a colorful frame to include around
your photos (use the Left and Right navigation keys to preview
available frames).
1. In camera mode, press the Options soft key, then highlight
or . The following options appear in the display:
• Off
• On
Note: The None frame is a blank frame.
2. Select the Night Shot setting of your choice.
2. Select the desired Shot Type.
Self Timer
Resolution
Self Timer lets you delay taking a picture long enough to let you
join others in a picture.
Resolution lets you change the clarity (in pixels) and size (in
bytes) of your pictures.
1. In camera mode, press the Options soft key, then highlight
1. In camera mode, press the Options soft key, then highlight
the Resolution setting. The following values appear in the
camera screen:
/
/
/
.
The following values appear in the camera screen:
•
•
•
•
Off
•
•
•
•
1280 X 960 (pixels)
640 X 480 (pixels)
320 X 240 (pixels)
176 X 144 (pixels)
2 Sec.
5 Sec.
10 Sec.
2. Select a Self Timer value.
2. Select the desired Resolution value.
Note: If you select 2 Sec., 5 sec., or 10 sec., a Self Timer icon (such as,
Note: The Resolution setting affects zoom capabilities. When Resolution is
set to 1280 X 960, zoom is not available. When Resolution is set to any
value lower than 1280 X 960, zoom settings 1 – 8 are available. Adjust
the zoom by using the Up and Down Navigation keys.
) appears in the camera screen in the display.
The next time you press
, the countdown Self Timer
indicates the time remaining before the camera takes the
picture. The phone reads the countdown timer value to you
beginning with two or three and continuing to zero, when
the picture is taken.
Night Shot
Night Shot lets you take pictures in low light conditions.
55
•
Fluorescent — Use this setting when taking pictures under
fluorescent lights.
Tip: To stop the countdown timer without resetting it, press
.
Each option, as you highlight it, shows the effects it has on
a picture.
Quality
You can affect how much your photo is compressed, thereby
reducing it’s overall size (not to be confused with resolution).
2. Select the desired White Balance value. The camera
viewfinder screen appears in the display with your
selected White Balance value applied.
1. In camera mode, press the Options soft key, then highlight
the current Quality indicator (SF
appear in the camera screen: SuperFine, Fine, and
Normal.
,
F,
N). The following values
The next time you press
, the camera applies your
selected White Balance value to your picture.
Color Effect
2. Select the desired Quality value.
Change the look of your pictures with Color Effect. Choose from
five available settings such as Green, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
White Balance
White Balance allows you to adjust picture quality according to
available light.
1. In camera mode, press the Options soft key, then highlight
1. In camera mode, press the Options soft key, then highlight
/
/
/
/
. The following values
. The following values appear in the display:
appear in the camera screen:
•
•
•
•
•
Normal — Subjects and pictures appear with a normal hue.
Black&White — Subjects and pictures appear in black and white.
Sepia — Subjects and pictures appear in a brownish-gray hue.
Negative — Subjects and pictures appear in inverted colors.
Green — Subjects and pictures appear in a greenish hue.
•
Auto — The camera automatically adjusts picture quality to
available light.
•
•
Sunny — Use this setting when taking pictures in full sun.
Cloudy — Use this setting when taking pictures in cloudy
conditions.
Note: Choose Normal to disable Color Effects.
•
Tungsten — Use this setting when taking pictures under
incandescent lights.
Camera
56
Auto Save
2. Select the Color Effects value of your choice. The camera
viewfinder screen appears in the display with your
selected Color Effects value applied.
1. In camera mode, press the Options soft key, highlight
, then select Auto Save. The following values appear
in the display:
When you take your next picture, the camera applies your
selected Color Effects value to your picture.
•
•
Off
On
Settings
2. Select the automatic save value of your choice. You’re
When you change Camera Settings values, your changes are
saved for future camera sessions, unlike changes to Camera
Options. To restore Camera Settings to their default values, select
returned to the camera viewfinder screen.
Icon Display
1. In camera mode, press the Options soft key, highlight
, then select Icon Display. The following values
appear in the display:
Memory
•
•
Display All — Shows camera icons.
Guideline — Shows a cross hatch pattern in the view finder
screen.
1. In camera mode, press the Options soft key, highlight
, then select Memory. The following storage options
appear in the display:
•
No Icons — Shows a nearly full-display subject image and without
icons.
• Phone — Stores your photos in phone memory.
• Card — Stores your photos on an optional microSD Memory Card.
2. Select the viewfinder screen setting of your choice. You’re
returned to the camera viewfinder screen.
2. Select the memory location setting of your choice.
Shutter Sound
Note: If Display All has been selected in the Options
icon ( or ) appears in the lower left corner of the camera
screen to indicate where photos will be stored.
➔Icon Display menu, an
Choose from four different sounds whenever you take a picture.
Aside from being a cool sound effect, Shutter Sounds acts as an
audible reminder that your camera has taken a picture.
1. In camera mode, press the Options soft key, highlight
57
, then select Shutter Sound. The following shutter
The next time you press
, the camera takes a lighter
sounds appear in the display:
or darker picture according to your selected Brightness
setting.
•
•
•
•
Off
Shutter 1
Shutter 2
Shutter 3
2. Select the shutter sound value of your choice. You’re
returned to the camera viewfinder screen. The next time
you press
, you’ll hear your selected shutter sound.
Reset Settings
1. In camera mode, press the Options soft key, highlight
, then select Reset Settings. You are prompted to
confirm reset of all camera settings.
•
•
Select the Yes option to reset the camera settings to default values.
Select the No option to keep the current camera settings.
Brightness
Brightness lets you temporarily lighten the pictures you take.
Increasing the Brightness (-4 – +4) lightens your pictures (0 is
normal).
ᮣ
In camera mode, press the Navigation key Left or Right to
adjust the Brightness (the screen image lightens or
darkens to show the affects of your changes).
Camera
58
Section 9: easyedgeSM
SM
SM
With easyedge , you can download multimedia, applications,
The easyedge shop
games, and check news and sports.
tab lets you browse a
catalog, search using
keywords, purchase
(when required), and
download an
Tip: You can access easyedgeSM Games home page directly from Standby
mode by tapping the Menu soft key, then selecting Games
.
Note: easyedgeSM from is only available on approved phones and requires an
application, ringtone, or
other multimedia files.
easyedgeSM data plan. Call customer service (by dialing 611) and ask
about easyedgeSM
.
SM
Changing your easyedge
settings
SM
SM
Accessing easyedge
With easyedge , you can
The easyedge
SM
Settings tab lets you
manage applications,
change the main menu
view, change
screensavers, and view
a log of your
download full featured
applications over the air
including games, personalized
ring tones, pictures, and
more.
downloads.
ᮣ
In Standby mode, tap
the Main Menu soft key,
then select easyedge. The easyedge screen appears in
SM
the display with the easyedge shop tab highlighted.
59
SM
Finding and Downloading Applications
Using easyedge
Help
1. In Standby mode, tap the Menu soft key, then select
1. In Standby mode, tap the Menu soft key, then select
SM
easyedge. The easyedge screen appears in the display
easyedge.
with the easyedge shop tab highlighted.
2. Use the Navigation key to select Help and press OK
.
2. Press OK
➔
➔
Catalog
.
– or –
Press OK
Search. Enter the keywords for the
application you want, then press Search
.
3. Follow the prompts to locate, purchase (when required),
and download an application, ringtone, or other
multimedia files.
easyedgeSM
60
Section 10: Toneroom
Toneroom is a pre-loaded application that lets you access your
Wireless Carrier’s on-line source for real music ringtones.
Accessing Toneroom
ᮣ
In standby mode, press
Featured
Artist
Main Menu (
), then
select Toneroom. The
Tone Room home page
appears in the display.
Follow the links on the
Tone Room home page to
find, purchase (if needed),
and download ringtone files.
Managing Your Tones
ᮣ
In the Tone Room home
page, selet the My Tones
tab. The My Tones page
appears in the display.
For more information about Tone
Room, contact your Wireless
Provider.
61
Section 11: Multimedia
This section outlines your phone’s multimedia functions and key
features associated with multimedia.
My Images
My Images lets you choose the pictures that appear in your
phone’s display while in standby mode (Wallpaper) and as picture
IDs for your contacts.
Accessing Multimedia
1. In standby mode, press Main Menu
, then select
Multimedia. The following sub-menus appear in the
display:
1. At the Multimedia menu, select My Images. A 3-by-2
matrix of thumbnail images of your pictures appears in the
display.
•
Tip: You can also access My Images from:
•
My Images — Lets you choose the pictures that appear in your
phone’s display or in picture messages.
– The Camera screen by pressing the My Images soft key
• Music Player — Lets you play music files stored on an optional
– The Edit Contact screen by selecting the picture ID field and pressing
the Set soft key.
2. Before selecting a picture, press the Options soft key.
Tip: To launch the Multimedia menu using a voice command — In standby
mode, press the Voice Command key ( ). The phone prompts, “Say a
command.” Say “Go to Multimedia” into the microphone.
3. A pop-up menu containing the following options appears in
the display:
•
•
•
Send — Lets you send the selected image to a specified recipient
2. Select the desired sub-menu. The following sections
in a Picture message or Via Bluetooth.
describe the above listed sub-menus in greater detail.
Online Album — Lets you access your online pictures that you
sent to you Online Album.
Set As — Lets you assign the selected picture as the Main
Wallpaper, or as a Picture ID for a Contact.
Multimedia
62
•
Erase Images — Erases all pictures or selected pictures.
• Move — Move the currently displayed or highlighted picture
between phone memory and an optional Memory Card.
•
•
Copy — Allows you to copy pictures to and from Phone Memory
and Card Memory.
View by Location — Allows you to view pictures in Phone
Memory, Card Memory, or All pictures
•
•
Rename — Lets you rename the picture.
Lock Unlock — Lets you prevent/permit picture deletion.
/
• Slide Show — Lets you see a slide show of all of your images.
•
Image Info — Displays information about the picture, such as the
picture Name, creation Date and Time
,
Resolution, and the data
Size
.
4. Highlight a picture, then press
to expand the
highlighted picture to fill the screen.
5. To return to the previous menu, press
. To return to
standby mode, press
.
63
Section 12: My Ringtones
This section outlines your phone’s Ringtones and lets you assign
ringtones (preloaded and downloaded) for Ringtone, Contact ID,
and as Alert Tone.
•
•
Contact ID — Lets you assign the selected ringtone as the
distinctive ringer for a Contact.
Alert Tone
—
Lets you assign the selected ringtone to All
Msg, Text Msg, Picture Msg, or Voicemail Msg.
1. In standby mode, press Main Menu
, then select My
4. Select the desired option.
Ringtones. A list of ringtones appears in the display.
5. When using a downloaded or recorded ringtone, press the
Options soft key and the following options appear in the
display:
Tip: You can also access My Ringtones from:
–A Set Alarm screen by selecting the Ringer option, highlighting the
second (file name) field, pressing the Left or Right navigation key, and
selecting My Ringtones.
•
Lock Unlock — Lets you prevent/permit file deletion (phone
/
memory only).
Erase — Erases the selected file.
•
•
•
–The Edit Contact screen by selecting the Ringtone field, pressing the
Rename — Lets you rename the selected file.
Ringtone Info — Displays information about the selected file,
such as the file name, the file type, and the data size.
Send Via Bluetooth — Lets you send ringtones via Bluetooth.
Send Pic Msg— Lets you send ringtones via a Pic Message.
•
•
2. Use the Navigation key to highlight a particular ringtone.
•
•
Press
Press the Options
File Type.
to PLAY the ringtone.
6. Select the desired option.
➔
Ringtone Info soft key to show the Title and
7. To return to the previous menu, press
. To return to
3. Press the Set As soft key to assign the highlighted
standby mode, press
.
ringtone. The following options appear in the display:
•
Ringtone — Lets you assign the selected ringtone to incoming
voice calls.
My Ringtones
64
Section 13: Bluetooth
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
display:
• Registered List
• Bluetooth Settings
With Bluetooth, you don't need to line up the devices to beam
information. If the devices are within a range of one another, you
can exchange information between them, even if they are located
in different rooms.
2. Select the desired Bluetooth sub-menu.
Add New Device
To search for available Bluetooth devices:
1. At the Bluetooth menu, select Registered List , then Add
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
New Device.
If Bluetooth is off, you are prompted to “Turn Bluetooth
on?”.
Turn Bluetooth On/Off
•
•
To turn Bluetooth on, press the Yes soft key.
When the Bluetooth is turned on, you can use the Bluetooth
features available. When the Bluetooth is turned off, you cannot
send or receive information via Bluetooth. To save battery life or
in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology
To leave Bluetooth off, press the No soft key.
“
Place device you are connecting to in discoverable mode”
appears in the display.
2. Place the Bluetooth device in discoverable mode. (For
more information, refer to the device user manual.)
3. Press
the display.
4. Highlight the device you want to pair with your phone.
. Names of the available devices appears in
Accessing Bluetooth
1. In Standby mode, press Main Menu
, then select
Bluetooth. The following sub-menus appear in the
65
5. Press PAIR
to pair the selected device with the
Note: If you are unable to pair with the device a pop-up appears in the
phone. You are prompted to enter the passkey or PIN for
the selected device. (For more information, refer to the
device user manual.)
display. To retry, press the Yes soft key.
Bluetooth Settings
1. At the Bluetooth menu, select Bluetooth Settings. The
6. Enter the device passkey or PIN and press
.
following options appear in the display:
Note: If you are pairing and connecting to another phone or to a personal
computer, both devices prompt for a passkey or PIN. To successfully
pair and connect your phone with the other device, the same passkey
or PIN must be entered on both devices.
• Enable Disable — Turns Bluetooth on or off.
/
• Discovery Mode — Lets other devices “see” (access) your device.
Select On for other devices to see your device, or Off for no visibility.
• Device Name — Shows the handset name. You may change this
Registered List
Registered List provides a list
of Bluetooth wireless
technology devices previously
connected to your handset.
name. Enter text changes and press
to save them.
• Supported Profiles — Lists and explains the Bluetooth profiles
supported by the phone.
• Device Info — Shows the Bluetooth Type, Status, and Address of
your phone.
ᮣ
At the Bluetooth menu,
2. Select the desired option to perform the related process.
select Registered List.
The Bluetooth screen
appears in the display showing a list of devices previously
connected to your device.
Connecting to a Registered Bluetooth Device
From the Registered List,
ᮣ
Select the desired device.
Bluetooth
66
Section 14: Tools
This section explains how to use the phone’s digital assistant
tools to schedule events, set reminders, perform calculations,
and more.
• Converter — Lets you convert currencies (according to the latest
rates) and weights, measures, and temperatures from one system
or increment to another.
• Tip Calculator — Lets you quickly calculate service gratuities with
a minimum of key presses.
Tools Menu
Tools is a suite of Personal Information Manager (PIM)
applications such as a Alarm Clock, World Time, and Memo Pad
that run on the phone. You can use the phone to time an event,
set reminders, perform calculations, and more with the functions
provided by this useful feature.
Tip: To launch the Tools menu using a voice command — In Standby mode,
press and hold
until the phone prompts, “Say a command.” Say “Go
to Tools” into the microphone.
2. Select the desired Tool sub-menu.
Opening Tools Menu
1. In Standby mode, press Main Menu
The following sections provide detailed descriptions of the
Tools and how to use their functions.
, then select
Tools. The following sub-menus appear in the display:
• Voice SVC — Lets you access voice recognition functions.
• Memo Pad — Lets you store and review useful information.
Voice Service
VoiceSignal is state-of-the-art voice recognition software for the
mobile phone that lets you dial numbers, lookup contact
information, and open applications using your voice. To access
voice settings, do the following:
• Alarm Clock — Lets you set an alarm to go off once, or daily, at a
specified time.
• World Time — Lets you view the current time of day or night in
another part of the world.
1. At the Tools menu, select Voice SVC.
• Calculator — Lets you perform calculations, including addition,
subtraction, multiplication, and division.
• Stop Watch — Lets you measure intervals of time.
67
–
–
–
page 38.)
Lookup — Lets you look up and display contact information for any
name stored in the Contacts list by saying the name. (For more
Go to — Lets you access all of the Main Menus on the phone.
Check — Lets you check the phone's status (that is, network
coverage, signal strength, and battery in the same report), network
coverage, signal strength, battery, and phone number.
The following options appear in the display:
•
Voice Commands — Lets you place calls, access the Contacts
List, review appointments, and more by speaking commands into
•
Voice Settings — Lets you adjust VoiceSignal settings.
2. Select the desired sub-menu.
Voice Commands
To start VoiceSignal, do one of the following:
–
–
•
In Standby mode, press and hold
.
“
Say a Command” appears in the display and is pronounced through
the earpiece, followed by a list of available commands.
•
At the Tools menu, select Voice SVC ➔ Voice Command
.
Note: Speaking clearly, say the command that you want to use.
Note: You can set the phone to start VoiceSignal when you open the phone.
If, after a few seconds, the device has not recognized a command, it
prompts you to repeat the command.
If, after a few more seconds, it still has not recognized a command, it
VoiceSignal includes the following commands:
tells you “Sorry, no match found,” and cancels voice recognition.
–
Call — Lets you dial the phone by saying any name stored in the
contact list, without ever having to record, or “train” that name.
VoiceSignal automatically voice-activates all the contacts, even if you
have hundreds of them stored on the phone. You can also dial any
telephone number, even if it is not stored in the contact list, by saying
Voice Command Tips:
Make sure you wait for the beep before speaking.
•
•
Speak clearly at a normal volume, as if you were talking on the phone.
Tools
68
Voice-Activating Your Contacts List
Choice Lists the following options appear in the display:
•
•
•
Automatic—VoiceSignal displays a choice list only when it is not
When you first start VoiceSignal, it reads your Contacts list and
voice-activates all the names stored there. When you have add or
change contacts, VoiceSignal automatically reloads and voice-
activates the entire list.
sure if it has correctly recognized the name or number.
Always On—VoiceSignal always displays a choice list, even when
there is only one choice.
Always Off—VoiceSignal never displays a choice list.
Ending Calls Before Restarting the VoiceSignal Software
Select the preferred Choice List behavior.
When you use VoiceSignal to make a call, you must end that call
before you can use VoiceSignal again.
Sensitivity
1. At the Voice SVC sub-menu, select Voice Settings ➔
Voice Settings
Choice Lists
Sensitivity. The Sensitivity screen appears in the display.
2. Use the Navigation key to adjust the selected Sensitivity
setting toward Reject More spoken commands or names
or toward Reject Less spoken commands or names.
VoiceSignal uses choice lists when it is not confident it has
correctly recognized a name or number. In this case, it can
display a list of up to three possible choices, and prompt you to
confirm the correct one.
3. To accept the new setting, press
.
Digit Dialing
You can change the way that VoiceSignal uses choice lists with
name dialing, digit dialing, and contacts. For each feature, you
can choose to always see a choice list (even if there is only one
choice), or never see a choice list (even if there are multiple
choices). If you leave the setting at “Automatic,” VoiceSignal
displays a choice list only when it is not confident it has correctly
recognized the name or number.
If VoiceSignal regularly does not recognize the numbers you say,
try adapting digit dialing to your voice. Adapting can improve the
accuracy of digit recognition, especially for people with strong
regional accents.
Note: After you adapt Digit Dial, the phone is customized to your voice, and
your voice only. Others are not be able to use the Digit Dialing feature
unless they reset the Digit Dialing to factory defaults. (For more
information, refer to “Reset Digits” on page 70.)
To change the way VoiceSignal uses choice lists:
ᮣ
At the Voice SVC sub-menu, select Voice Settings ➔
69
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
•
•
If the recording was good, say “Yes.”
If you need to re-record, say “No.”
Tips for Adapting Digit Dialing
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
•
•
•
•
Use Adapt Digits in a quiet place.
Make sure you wait for the beep before starting to speak.
Speak clearly, and say each digit distinctly.
Repeat this step until you’re satisfied with the recording.
3. After confirming that the recording sounds “ok”, continue
If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, re-record that
sequence.
the recording process with the next set of digits.
4. After six sets of digits, the phone asks whether you want to
do more adaptation. Answer “Yes.”
•
Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing does not work as well for other people
using the phone. (You can always reset digit adaptation to its original
state, as described below.)
5. Repeat steps 4 and 5 for another six sets of digits. After
the second group of six sets of digits, “Adaptation
complete” plays through the speaker and you are returned
to the Adapt Digits menu.
Adapt Digits
Reset Digits
To adapt digit dialing, do the following:
To reset digit dialing to factory default settings, do the following:
1. At the Voice SVC sub-menu, select Voice Settings ➔
1. At the Voice SVC sub-menu, select Voice Settings ➔
Digit Dialing ➔ Adapt Digits.
Digit Dialing ➔ Reset Digits.
Your phone displays the first digit sequence and “Please
say” plays through the speaker followed by the four digits
that appear in the display.
The phone prompts you to confirm digit reset.
2. Press the OK soft key to reset the digit adaptation. Press
the Back soft key to cancel.
2. Wait for the beep and say the digits using your normal tone
of voice. After a moment, the phone plays back the
recording and prompts “Did the recording sound ok?
”
Tools
70
Sound
About VoiceSignal
Sound lets you specify what (if any) text prompts you want the
phone to read to you through the earpiece.
This option causes the About VoiceSignal screen to appear in
the display, showing version and build information about the
VoiceSignal software included on the phone.
1. At the Voice SVC sub-menu, select Voice Settings ➔
Sound. The following options appear in the display:
1. At the Voice SVC sub-menu, select Voice Settings ➔
About.
•
•
•
•
Prompts — Enables (On) or disables (Off) playing of prompts.
Digits — Enables (On) or disables (Off) playing of digits.
Names — Enables (On) or disables (Off) playing of names.
The About Nuance screen appears in the display showing
the version level of the VoiceSignal software currently
installed on the phone.
Name Settings — Lets you adjust the speed and volume of the
phone’s audio name playback.
Memo Pad
2. Select the desired option and setting.
You can create a notes and store them in Memo Pad. You can’t
prioritize or set an alert for stored notes. Return to Memo Pad
anytime you wish to review and edit your notes.
Voice Launch
To set the key or action that launches VoiceSignal, do the
following:
Add a Memo
1. At the Tools menu, select Memo Pad. If you have any
stored memos, they appear as a list in the display. If this is
the first time to access the Memo Pad, “No memos”
appears in the display.
1. At the Voice SVC sub-menu, select Voice Settings ➔
Voice Launch. The following options appear in the display:
•
Key Only — Press and hold
call.
to activate VoiceSignal for one
2. To add a new memo, press the Add soft key.
•
Key/Ear Mic — Attach a headset to the phone. Press and hold
to activate VoiceSignal. Now, you can make and end calls
using VoiceSignal by pushing the button on the headset.
2. Select the Voice Launch option you want.
4. When you’re finished entering memo text, press OK
to save the memo.
71
View, Edit, and Erase Memos
1. At the Tools menu, select Memo Pad. A list of stored
Note: The alarm doesn’t function when the phone is turned off. If the time for
an alarm that was set for Once has elapsed and the phone is off, the
alarm occurs at the same time on the following day.
memos appears in the display.
2. Highlight the desired memo.
1. At the Tools menu, select Alarm Clock.
3. To view the memo, press VIEW
.
2. Press the Add soft key.
4. To edit the memo you are viewing, press the Edit soft key.
3.
A
Set Alarm 1 screen appears in the display containing the
Enter text changes using the keypad. (For more
following options:
•
•
•
•
Alarm
5. To erase the memo you are viewing, press the Options soft
key, then select Erase. You are prompted to verify the
erasure.
Time
Frequency
Ringer
•
•
To erase the memo, press the Yes soft key.
4. Highlight the options you wish to change, then select
values for the options using the Left and Right navigation
keys.
To keep the memo, press the No soft key.
6. To add a new memo, press the Options soft key, then
select Add New Memo.
To enter the Time for the alarm, use the keypad.
7. To lock or unlock the memo, press the Options soft key,
5. When you’re finished entering and selecting values for the
then select Lock/Unlock.
alarm, press
(
. The alarm is set and the alarm icon
Alarm Clock
) appears in the top of the display.
Your phone has an alarm clock that can be set to go off once, or
daily at a specified time. Once set, the alarm clock is easy to
change or turn off completely.
When an Alarm Sounds
An animated alarm clock appears in the display with the options
Snooze or Dismiss, and an alert sounds when the specified time
for the alarm arrives.
Tools
72
ᮣ
To silence the alarm, use the Navigation key to select
Dismiss.
• On Off — Enables or disables the highlighted Alarm, using
/
current settings.
• Add new alarm — Sets a new alarm.
• Erase this alarm — Deletes the highlighted alarm.
• Erase All — Deletes all alarms that have been set.
•
•
•
•
If the alarm was set as a Daily alarm, the alarm icon remains in the
top of the display.
If the alarm was set as a Mon.-Fri., the alarm icon remains in the
top of the display.
World Time
If the alarm was set as a Weekends only alarm, the alarm icon
remains in the top of the display.
World Time lets you view the time of
day or night in another part of the
world. World Time displays time in the
24 different time zones around the
world.
If the alarm was set as a Once only alarm, the alarm icon
disappears from the top of the display.
Turn Off the Alarm
Turning off an Alarm stops it from sounding when the set time is
reached while retaining the Alarm settings for reuse.
1. At the Tools menu, select World
Time. A world map appears in
the display.
1. At the Tools menu, select Alarm Clock.
2. Press the Options soft key and select Off. The highlighted
Alarm is turned off, but the alarm settings are retained for
later reuse.
2. To display the time zone and city that you wish to view, use
the Left and Right navigation keys, or press the Options
soft key, then select Go to City and the preferred city in the
alphabetical city list.
Reset the Alarm
Resetting one or all Alarms erases all of the Alarm settings and
restores the default settings.
1. At the Tools menu, select Alarm Clock.
2. Press the Options soft key. Select from the following
options:
73
The following time zones/cities are supported:
The following options are available:
•
To show Daylight Saving Time (DST) for the displayed time zone,
press the DST On soft key. To display standard time, press the DST
Off soft key.
EST/EDT:
Miami
New York
Mid Atlantic
La Paz
Caracas
Newfoundland
Buenos Aires
Brasilia
•
•
•
Press the Options soft key and select Set as home zone to set the
displayed time zone as the home time zone for the phone.
Cape Verde
Lisbon
London
Paris
Rome
Berlin
Press
to set the displayed time zone as the second time
zone for the phone.
Athens
Helsinki
Istanbul
Kabul
Nairobi
Moscow
Jiddah
Tehran
Abu Dhabi
Press
to keep the current home time zone and/or second
time zone and return to the Tools menu.
Calculator
Tashkent
Mumbai
New Delhi
Colombo
Hong Kong
Beijing
Kathmandu
You can perform calculations,
including addition, subtraction,
multiplication, and division using the
phone.
Alma-ata
Adelaide
Bangkok
Jakarta
Seoul
Tokyo
1. At the Tools menu, select
Calculator. The Calculator
appears in the display.
Guam
Sydney
Okhotsk
Wellington
Auckland
PST/PDT:
San Francisco
Los Angeles
Samoa
Midway
HAST/HADT:
Honolulu
Hawaii
AKST/AKDT:
Alaska
2. Enter the first number in the calculation using the keypad
(numbers can be up to fifteen digits long).
MST/MDT:
Denver
CST/CDT:
Dallas
•
To enter a decimal point, press
digits after a decimal point.)
. (Calculator only accepts five
Phoenix
Chicago
•
To change the sign for a number to a negative, press
.
Tools
74
3. Use the Navigation key to set the type of calculation that
Stop Watch
You can use this menu to measure
intervals of time.
you wish to perform. Choices are as follows:
•
•
•
•
•
Up navigation key — [
Left navigation key — [
OK key — [ ] Equals/Total
Right navigation key — [
Down navigation key — [
x
] Multiplication
-
] Subtraction
1. At the Tools menu, select Stop
=
Watch.
+] Addition
2. Press
to start, stop, and
resume the stop watch count.
÷] Division
For nested operations [such as (1.81 + 9.34) / 5.22] and to
calculate powers (such as 3 ), press the Operator soft key.
The following options appear in the display:
3. Press the Record soft key at
the start of each succeeding
event/lap to record the
completion time for the
previous lap.
2
•
•
•
(
)
— Beginning of nested operation
— Ending of nested operation
4. Press the Reset soft key to
erase all stop watch (lap) times
recorded.
Power — Raise the current number to the power of the next entry
4. Use the keypad to enter the next number in the calculation.
5. Repeat steps 3 and 4 as needed.
Converter
6. Press
to perform the calculation and view the result.
to clear the last operation or number entry.
The conversion menu provides the following conversion features:
7. Press
•
•
•
•
•
•
Currency
Length
8. Press the Clear soft key to clear all of the entries.
Weight
Volume
Area
Temperature
75
• To convert a currency, length, weight, volume, area, or
temperature, do the following:
Currency — Reviewing/Editing Exchange Rates
The Currency Converter includes long-term average exchange
rates as default values. To review and/or change a default
exchange rate to the current exchange rate, do the following:
1. At the Tools menu, select Converter.
2. Select the conversion feature
you wish to use. The selected
conversion feature screen
1. At the Tools menu, select Converter ➔ Currency.
2. Press the Rate soft key. The
Exchange Rate list for the
USD (U.S. Dollars) currency
appears in the display.
appears in the display with the
From unit field highlighted.
3. Use the Left and Right
navigation keys to select the
unit to convert From.
3. Select the currency exchange
rate you want to change.
4. Highlight the From quantity field.
4. To edit the highlighted exchange
5. Use the keypad to enter the
quantity you want converted in
the From quantity field.
rate, press EDIT
.
5. Use the keypad to change the
current exchange rate. (For
6. Highlight the To unit field.
7. Use the Left and Right
navigation keys to select the
units to convert From and To. The converted quantity
displays in the To quantity field.
•
Press
to save the
changed exchange rate.
•
Press the Cancel soft key to
discard the changes and return to the Currency Converter screen.
Note: To include a decimal point, press
.
Tools
76
Currency — Adding Exchange Rates
8. Enter a decimal exchange rate for the new currency using
the keypad.
You can use the Currency Converter to convert from and to
obscure currencies by adding exchange rates for these
currencies. To add a currency and its exchange rate to the
Currency Converter, do the following:
Note: Press the
key to enter the decimal point.
The Exchange Rate field only accepts up to 5 digits after the decimal
point.
1. At the Tools menu, select Converter ➔ Currency.
2. Press the Rate soft key. The Exchange Rate list for the
9. To save the new exchange
USD (U.S. Dollars) currency appears in the display.
rate, press
. The
Exchange Rate list for the
USD (U.S. Dollars) currency
appears in the display with the
new exchange rate at the
bottom of the list.
3. Press the Add soft key. The
Add Exchange Rate screen
appears in the display with the
Base field highlighted.
4. Use the Left and Right
navigation keys to select the
Base currency to convert from.
Currency — Erasing Exchange Rates
You cannot erase the preloaded currencies from the Exchange
Rate list. You can erase a currency that you have added to the list
by doing the following:
5. Highlight the Currency field.
6. Enter an identifier of up to 5
characters for the new
1. At the Tools menu, select Converter ➔ Currency.
currency using the keypad. (For
2. Press the Rate soft key. The Exchange Rate list for the
USD (U.S. Dollars) currency appears in the display.
7. Highlight the Exchange Rate
field.
77
3. Highlight the currency
3. If needed, highlight the Tip field
and use the keypad to change
the tip percentage.
exchange rate to erase.
4. Press the Erase soft key. You
are prompted to confirm the
erasure.
4. If needed, highlight the # Paying
field and use the keypad to
change the number of persons
paying.
•
To erase the highlighted exchange
rate, press the Yes soft key.
•
To keep the highlighted exchange rate, press the No soft key.
5. The amount of the Tip, the bill Total, and the amount each
person should pay appear in the lower half of the screen.
Tip Calculator
Tip Calculator automatically
calculates the following amounts:
•
•
Gratuity (tip)
Individual payment (for groups)
Calculations are based on the total
amount of the check, a selected
percentage, and the number of people paying.
1. At the Tools menu, select Tip Calculator. The Tip Calculator
screen appears in the display with the Bill field
highlighted.
2. Use the keypad to enter the total amount of the bill.
Note: To include a decimal point, press the
key.
Tools
78
Section 15: Calendar
This section explains how to use your Calendar to view the
current, past, or future month in a monthly calendar layout. While
viewing the calendar, the current date is highlighted and days
with scheduled appointments are surrounded by a box.
Add an Appointment
1. At the Tools menu, select Calendar.
Tip: You can all access Calendar by pressing [Calendar on keyboard].
View an Appointment
1. In standby mode, press Main Menu
The current month is displayed, with the current date highlighted.
, then select
2. To add an appointment, press the Add soft key. The New
Calendar.
Event screen appears in the display:
•
•
•
•
•
•
•
•
•
Appointment Name
Start Date
Start Time
End Date
Tip: You can all access Calendar by pressing
.
The current month is displayed, with the current date highlighted.
2. To add an appointment, press the Add soft key.
3. To view details of the highlighted date, press VIEW
4. Press the Options soft key for the following options:
• Go to Date — Select a specific date entry that you want to view.
• Go to Today — Returns you to today’s view.
.
End Time
Recurrence
Alert
Reminder
Alert time
• Weekly — Shows the current week in weekly view.
• Erase Old — Erase events that are older than a specified time (one
day, week, month, or year).
3. Enter or select values for each setting by highlighting the
setting and selecting values by pressing the Navigation key
Left or Right.
• Erase all — Erase all events and appointments on your phone.
4. Press Save
.
79
Delete an Appointment
1. At the Tools menu, select Calendar.
Tip: You can all access Calendar by pressing [Calendar on keyboard].
The current month is displayed, with the current date highlighted.
2. Select the appointment and press VIEW
.
3. Press the Options soft key.
4. Select Erase and select Yes or No
.
Calendar
80
Section 16: Changing Your Settings
This section explains how to customize your call and phone
settings to suit your needs and preferences.
•
Phone Info — Shows you information such as your phone
number, an icon glossary, and software and hardware version of
your phone.
Accessing Your Settings
2. Select the desired option or sub-menu.
1. In standby mode, press Main Menu
, then select
Location
Settings.
This function identifies your location to the network via the Global
Positioning System (GPS). You can set this function for
continuous operation or to operate only in the event that you dial
911.
Tip: To launch the Settings menu using a voice command — In standby
mode, press the Voice Command key ( ). The phone prompts, “Say a
command.” Say “Go to Settings” into the microphone.
The Settings menu appears in the display showing the
following options and sub-menus:
Note: Contact U.S. Cellular to determine whether, when, or where location-
based services are available.
•
Location — Set your phone to send location data continually or
only when you dial 911.
1. At the Settings menu, select Location.
• Sounds — Lets you select the sounds that play when you receive
calls or messages, enable or disable alert tones, and set tone
volume.
• Display — Lets you customize the appearance of your standby
screens (Main and Front), Main Menu, and dialing screen.
The following options appear in the display:
•
Location On — GPS location is on whenever you make or receive
a call, wherever the feature is available.
•
911 Only — GPS location is on only when you dial 911.
•
•
•
Call Settings — Set how your phone handles voice and data
calls.
Phone Settings — Set your phone’s safety, network, and security
options.
Memory Info — Select where photos are stored, manage your
phone’s memory, and format and manage Memory Card storage.
2. Select the desired Location setting. You’re returned to the
Settings menu.
81
Sounds
Display
The Sounds settings let you customize your phone’s audio
properties, such as ringers, keypad tones, alerts, shut down
sounds, and more.
The Display settings let you change your phone’s menu
appearance, display brightness and contrast, and display content
to better meet your needs.
Accessing the Sounds Menu
Accessing the Display Menu
To access the Sounds menu, do the following:
To access the Display menu, do the following:
1. At the Settings menu, select Sounds. The Sounds menu
1. In standby mode, press Main Menu
, then select
appears in the display.
Settings ➔ Display. The Display menu appears in the
display.
2. Select the desired sub-menu from one of the following:
2. Select the desired sub-menu from one of the following:
• Master Volume: allows you to set the default volume for incoming
calls, messages and alarms. You can set the volume to Silence All,
Vibrate, Low, Low/Medium, Medium, Medium/High, or High. The
Vib. on soft key allows you select vibrate in addition to the sound.
• Menu Style: lets you choose from Icon view or List view.
• Wallpaper: lets you choose the images that appear in the
background of your phone’s front and main displays while your
phone is closed or in standby mode.
• Ringer Type: you can assign ringtones for calls, text messages,
picture messages, and voicemail.
• Info Panel: lets you view the information panel on your display.
When set to On, the panel will show the current day, date, and time,
as well as counters for calls and messages received.
• Alerts: you can set your phone to sound an alert whenever you
enter or leave your service area, connect or disconnect a call, and
other options.
• Clock Format: lets you choose the format your phone will use to
present the current time on your phone’s display. Choose between
Samsung or Digital.
• Key Tone: allows you to adjust the volume level and length of the
tone that the keypad generates each time you press a key. You can
set the Tone Level and the Tone Length.
• Dialing Font Size: lets you select the size of your dialing font. You
can choose between Normal size or Large size.
• Banner: create your own personalized greeting that appears in the
display while your phone is in standby mode.
Changing Your Settings
82
• Backlight: you can set the backlight for your display or keypad to
remain on for a specified period of time.
automatically dials the number may vary. You can turn it Off, or set
it to Auto Retry after every 10, 30, or 60 seconds.
• Shortcut Icon: lets you view the shortcut icons on your display.
Note: Prolonged backlight use drains your battery faster.
• Voice Privacy: when Voice Privacy is enabled (that is, set to
Enhanced), it turns on advanced voice encryption. Set to Standard
to disable Voice Privacy.
Call Settings
• Data Settings: use the Data Settings menu to configure data
connection settings. Set to Data Off, Data For Next Call, or Data
Until Powered Off.
The Call Settings options let you select how your phone handles
voice and data calls.
To access the Call Settings menu, do the following:
• International Dialing: Lets you set the code that the international
call shortcut uses to dial international numbers.
1. At the Settings menu, select Call Settings. The Call
Settings sub-menu appears in the display.
TTY Mode
2. Select the desired sub-menu from one of the following:
Your phone is fully TTY compatible. TTY equipment is connected
to your phone through the headset connector on the top of the
phone. TTY Mode must be enabled before you can use your
phone with a TTY device.
• Call Answer: you can select a specific answer mode when you
receive an incoming call. Your phone can be preset to answer when
you press any key or when you press the Send
key.
• Call Alert: lets you select how your phone indicates an incoming
call. You can set the Call Alert to Ring Only, Caller ID + Ring, or
Name Repeat (Contact name displays).
Note: Your Freeform phone has a 2.7 mm headset connector. Contact your
Wireless Provider to determine whether you need an adapter for your
TTY device.
• Auto Answer: enables your phone to automatically answer calls
after a period of time that you specify. You can turn it Off, or set it to
Auto Answer after 1, 3, or 5 seconds.
1. At the Call Settings sub-menu, select TTY Mode. You are
prompted to confirm you want to change the current TTY
Mode setting.
• Auto Retry: automatically re-dials a number if the connection fails.
Depending upon your location, the number of times your phone
83
• Airplane Mode: when set to On, Airplane Mode disables all radio
functions of your phone. This prevents you from receiving or
making calls (except emergency calls), but allows you to use other
features (such as the camera and the Tools) safely in sensitive
environments, such as on board an aircraft.
Note: The “Enabling TTY may impair headset use and non-TTY
accessory performance” message pops up when you select TTY
Mode.
•
•
To access the TTY Mode options, press the Yes soft key.
To return to the Call Settings sub-menu, press the No soft key.
• Language: this option can change the language of voice prompts,
menus, and key-input. You can select English or Español
(Spanish).
2. When you press the Yes soft key, the following options
appear in the display:
• Security: use the Security sub-menu to lock your phone, set up
emergency numbers, enable or disable voice privacy, set
restrictions, and other security options. You will need your lock code
which is by default, the last four digits of your phone number. The
following Security options are available:
•
TTY Full — Enables TTY mode and disables microphone and
earpiece.
TTY + Talk — Enables TTY mode and microphone.
TTY + Hear — Enables TTY mode and earpiece.
TTY Off — Disables TTY mode.
•
•
•
–
Lock Phone: Locking the phone limits all outgoing calls except calls to
911 emergency and the three user-programmable emergency
numbers. You can lock the phone manually during use, or set the phone
to lock automatically when it is turned on. With the phone in lock mode,
you can answer incoming calls, but you must unlock the phone to place
outgoing calls (except to emergency and secret numbers).
3. Select the desired TTY Mode setting.
Note: The TTY icon (
) appears in the top of the display when the phone is
in standby mode.
Phone Settings
The Phone Settings options let you tailor your phones basic
operations.
–
Change Lock: The default lock code for your phone is generally the last
four digits of your phone number. It is advisable to change the default
lock code to a secret code for security purposes.
To access the Phone Settings sub-menu, do the following:
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
1. At the Settings menu, select Phone Settings. The Phone
Settings sub-menu appears in the display.
2. Select the desired sub-menu from one of the following:
Changing Your Settings
84
–
Emergency #: Your phone provides the option of storing three
emergency numbers. Each number can be up to 32 digits in length. All
emergency numbers can be manually called at any time, even when
your phone is locked or restricted. This can be a useful feature for
controlling outgoing calls from your phone.
• NAM Selection: allows you to select NAM (Number Assignment
Module) settings for your phone. You can store two NAM settings,
which are essentially telephone numbers, for your phone.
• System Select: allows you to select the roaming setting for your
phone. Select between Home Only or Automatic.
• Set Time: use the Set Time option to set the current time and date.
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.
Note: In digital service mode, the Set Time feature is disabled. The network
adjusts time and date automatically.
• Speed Dial: allows you to turn the Speed Dial feature On or Off.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
• Shortcut Key: allows you to set shortcuts for the Up, Right, Down,
and Left navigation keys.
• Quick Search: is an easy way to locate Menu items and Contacts.
Turn Quick Search on and you can enter the first few letters of the
contact, menu name, or item and items will be displayed.
Important!: DO NOT depend on this phone as a primary method of calling
• PC Connection: lets you select the default type of PC connection
for exchanging files with your Freeform phone. You can select USB
Mass Storage, or No Connection.
911 or for any other essential or emergency communications.
–
–
–
Reset Phone: returns all setup options to their factory default.
• Auto Key Lock: allows you to turn the Auto Key Lock function On or
Off.
Erase All Contacts: erases all information from your Contacts list.
Restriction: lets you limit the use of your phone to make outgoing calls
and/or to receive incoming calls to any numbers, to no numbers, or to
calls from/to your Contacts; to send and/or receive SMS (Text) or MMS
(Picture) messages; and/or to make IP (Internet Protocol) connections.
Memory Info
Memory Info lets you quickly and easily review and manage your
phone memory usage. To access Memory Info, do the following:
85
1. In standby mode, press Main Menu
, then select
Icon Glossary
Settings ➔ Memory Info. The Memory Info menu
This option causes the Icon Glossary list to appear in the display
and show the icons that can appear in the display and the names
of the icons.
appears in the display.
2. Select the desired sub-menu from one of the following:
• Save Options — Lets you specify whether your images and files
1. In standby mode, press Main Menu
Settings Phone Info Icon Glossary. A list shows of the
icons that can appear on the top line of the display.
2. To return to the Phone Info menu, press
, then select
will be stored in your phone or on an optional Memory Card.
➔
➔
• Phone Memory — Lets you review your phone’s available memory
and manage your files stored there.
.
• Card Memory — Lets you review a removable Memory Card’s
available memory, manage your files stored there, and format new
Memory Cards.
Version
You can view both the software and hardware version of your
phone using this feature. This feature is helpful if you need to
contact Customer Service.
Phone Info
This section explains Phone Info options that let you identify the
hardware and software versions of your phone and let you
identify the phone number assigned to your phone.
1. In standby mode, press Main Menu
Settings Phone Info Version
, then select
➔
➔
.
Your phone’s hardware and software version information
appears in the display.
Phone Number
This option causes the Phone Number screen to appear in the
display and show the ten-digit number assigned to your phone by
your Wireless Provider.
2. To return to the Phone Info menu, press
.
1. In standby mode, press Main Menu
, then select
Settings Phone Info Phone Number. The phone
➔
➔
number assigned by your Wireless Provider appears in the
display.
2. To return to the Phone Info menu, press
.
Changing Your Settings
86
Section 17: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. These safety precautions should be followed to
safely use your phone.
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
For body worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
87
contains no metal and that positions the handset a minimum of
1.5 cm from the body.
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
Warning Regarding Display
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The display on your handset is made of glass or acrylic and could
break if your handset is dropped or if it receives significant
impact. Do not use if screen is broken or cracked as this could
cause injury to you.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Part 22
•
•
Head: 0.971 W/Kg.
Body-worn: 0.523 W/Kg.
Part 24
information.
•
•
Head: 1.42 W/Kg.
Body-worn: 0.519 W/Kg.
UL Certified Travel Adapter
SAR information on this and other model phones can be viewed
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
Health and Safety Information
88
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
What is FDA's role concerning the safety of wireless
phones?
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
Under the law, FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before they
89
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
•
•
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
•
•
•
Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Health and Safety Information
90
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don't know with certainty what the results of such
studies mean for human health.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists.
Epidemiological studies can provide data that is directly
applicable to human populations, but ten or more years' follow-
up may be needed to provide answers about some health effects,
such as cancer.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do -
may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
However, none of the studies can answer questions about long-
term exposures, since the average period of phone use in these
studies was around three years.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
91
questions about the effects of exposure to radio frequency
energy (RF).
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The Project has also helped develop a series of
public information documents on EMF issues.
•
If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected to a remote
antenna.
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
Health and Safety Information
92
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000.
Either configuration should result in compliance with the safety
limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims.
They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to
limit wireless phone use by children was strictly precautionary; it
was not based on scientific evidence that any health hazard
exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that hands-
free kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
93
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
•
•
•
•
•
•
•
•
FCC RF Safety Program:
Environmental Protection Agency (EPA):
Occupational Safety and Health Administration's (OSHA):
National Institute for Occupational Safety and Health (NIOSH):
World Health Organization (WHO):
International Commission on Non-Ionizing Radiation Protection:
Health Protection Agency:
US Food and Drug Administration:
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/1/2006):
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
Health and Safety Information
94
1. Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
6. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try
to plan calls when your car will be stationary. If you need to
make a call while moving, dial only a few numbers, check
the road and your mirrors, then continue.
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
7. Do not engage in stressful or emotional conversations that
may be distracting. Make people you are talking with
aware you are driving and suspend conversations that
have the potential to divert your attention from the road.
3. Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes
from the road. If you get an incoming call at an
8. Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
or medical emergencies.
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving;
if necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice and even heavy
traffic can be hazardous.
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1 or
other local emergency number, as you would want others
to do for you.
5. Do not take notes or look up phone numbers while driving.
Jotting down a "to do" list or flipping through your address
book takes attention away from your primary
responsibility, driving safely.
95
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see a
broken-down vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
number.
Prolonged exposure to loud sounds (including music) is the most
common cause of preventable hearing loss. Some scientific
research suggests that using portable audio devices, such as
portable music players and cellular telephones, at high volume
settings for long durations may lead to permanent noise-induced
hearing loss. This includes the use of headphones (including
headsets, earbuds, and Bluetooth or other wireless devices).
Exposure to very loud sound has also been associated in some
studies with tinnitus (a ringing in the ear), hypersensitivity to
sound and distorted hearing.
"The wireless industry reminds you to use your phone safely when
driving."
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
For more information, please call 1-888-901-SAFE, or visit our
web-site www.ctia.org
.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
Provided by the Cellular Telecommunications & Internet
Association.
You should follow some commonsense recommendations when
using any portable audio device:
Responsible Listening
•
Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
Caution!: Avoid potential hearing loss.
•
When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations.
Health and Safety Information
96
•
Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, use
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
•
•
Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
Email: [email protected]
Internet: http://www.audiology.org
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
•
Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Email: [email protected]
You can obtain additional information on this subject from the
following sources:
Internet: http://www.nidcd.nih.gov/
97
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
National Institute for Occupational Safety and Health (NIOSH)
395 E Street, S.W.
Suite 9200
Patriots Plaza Building
Washington, DC 20201
UsingYourPhoneNearOtherElectronicDevices
Voice: 1-800-35-NIOSH (1-800-356-4647)
1-800-CDC-INFO (1-800-232-4636)
Outside the U.S. 513-533-8328
Email: [email protected]
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
Implantable Medical Devices
Internet: http://www.cdc.gov
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
1-888-232-6348 TTY
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger.
Persons who have such devices:
•
Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
Should not carry the phone in a breast pocket;
•
•
When connecting the phone or any accessory to another device,
read its user's guide for detailed safety instructions. Do not
connect incompatible products.
Should use the ear opposite the implantable medical device to
minimize the potential for interference;
Health and Safety Information
98
•
•
Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place;
The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users find phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the rating on their
box or a label located on the box.
Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless phone with such a device, consult your health care
provider.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
For more information see:
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than
phones that are not labeled. T4 is the better/higher of the two
ratings.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are
more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together.
99
A sum of 5 is considered acceptable for normal use. A sum of 6
is considered for best use.
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
T3
+
T2
=
5
M3
+
M2
=
5
Vehicles
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with "normal usage" while
using their hearing aid with the particular wireless phone.
"Normal usage" in this context is defined as a signal quality that
is acceptable for normal operation.
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Switch your phone off in any facility where posted notices require
you to do so.
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules.
Health and Safety Information
100
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
To make an emergency call:
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
3. Press the
key.
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
101
Restricting Children's access to your Phone
Cautions
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
phone warranty if said accessories cause damage or a defect to
the phone.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association:
Other Important Safety Information
•
Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
NFPA (National Fire Protection Agency)
1 Batterymarch Park
•
•
•
Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
Quincy, Massachusetts
USA 02169-7471
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
Internet: http://www.nfpa.org
Health and Safety Information
102
•
•
Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
Maintaining Your Phone's Peak Performance
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
If you're inside a building, being near a window may give you
better reception.
•
To ensure that the Hearing Aid Compatibility rating for your phone is
maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call. For more information,
Understanding the Power Save Feature
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
•
If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
•
•
•
Do not hold, bend or twist the phone's antenna, if applicable.
Do not use the phone if the antenna is damaged.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
•
Speak directly into the phone's receiver.
103
•
Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
•
If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
Availability of Various Features/Ring Tones
•
•
Follow battery usage, storage and charging guidelines found in the
user’s guide.
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
Battery Standby and Talk Time
•
•
If left unused, a fully charged battery will discharge itself over time.
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
Battery Precautions
•
Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
•
Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
•
•
Never use any charger or battery that is damaged in any way.
Do not modify or remanufacture the battery as this could result in
serious safety hazards.
Health and Safety Information
104
•
Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
•
•
Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
•
•
Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
0 °C (32 °F).
•
•
Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
•
•
•
•
•
Keep the phone and all its parts and accessories out of the reach of
small children.
Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
•
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
•
Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
105
•
Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
•
•
Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
•
•
•
Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
•
If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
Health and Safety Information
106
Section 18: Warranty Information
Standard Limited Warranty
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
Phone
1 Year
Batteries
1 Year
Leather Case
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
107
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-987-
4357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
•
•
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
•
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
Warranty Information
108
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
109
only; provided that the backup copy must include all copyright or
other proprietary notices contained on the original.
End User License Agreement for Software
IMPORTANT. READ CAREFULLY: This End User License Agreement
("EULA") is a legal agreement between you (either an individual
or a single entity) and Samsung Electronics Co., Ltd. for software
owned by Samsung Electronics Co., Ltd. and its affiliated
companies and its third party suppliers and licensors that
accompanies this EULA, which includes computer software and
may include associated media, printed materials, "online" or
electronic documentation ("Software"). BY CLICKING THE "I
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE
"DECLINE" BUTTON, DISCONTINUE USE OF THE SOFTWARE.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves
all rights not expressly granted to you in this EULA. The Software
is protected by copyright and other intellectual property laws and
treaties. Samsung or its suppliers own the title, copyright and
other intellectual property rights in the Software. The Software is
licensed, not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to
discover the source code or algorithms of, the Software (except
and only to the extent that such activity is expressly permitted by
applicable law notwithstanding this limitation), or modify, or
disable any features of, the Software, or create derivative works
based on the Software. You may not rent, lease, lend, sublicense
or provide commercial hosting services with the Software.
1. GRANT OF LICENSE. Samsung grants you the following rights
provided that you comply with all terms and conditions of this
EULA: You may install, use, access, display and run one copy of
the Software on the local hard disk(s) or other permanent storage
media of one computer and use the Software on a single
computer or a mobile device at a time, and you may not make
the Software available over a network where it could be used by
multiple computers at the same time. You may make one copy of
the Software in machine-readable form for backup purposes
4. CONSENT TO USE OF DATA. You agree that Samsung and its
affiliates may collect and use technical information gathered as
part of the product support services related to the Software
provided to you, if any, related to the Software. Samsung may
use this information solely to improve its products or to provide
customized services or technologies to you and will not disclose
this information in a form that personally identifies you.
Warranty Information
110
5. UPGRADES. This EULA applies to updates, supplements and
add-on components (if any) of the Software that Samsung may
provide to you or make available to you after the date you obtain
your initial copy of the Software, unless we provide other terms
along with such upgrade. To use Software identified as an
upgrade, you must first be licensed for the Software identified by
Samsung as eligible for the upgrade. After upgrading, you may
no longer use the Software that formed the basis for your
upgrade eligibility.
8. TERMINATION. This EULA is effective until terminated. Your
rights under this License will terminate automatically without
notice from Samsung if you fail to comply with any of the terms
and conditions of this EULA. Upon termination of this EULA, you
shall cease all use of the Software and destroy all copies, full or
partial, of the Software.
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge
and agree that use of the Software is at your sole risk and that
the entire risk as to satisfactory quality, performance, accuracy
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND
WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND
SAMSUNG AND ITS LICENSORS (COLLECTIVELY REFERRED TO AS
"SAMSUNG" FOR THE PURPOSES OF SECTIONS 9, 10 and 11)
HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH
RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF
SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF FITNESS
FOR A PARTICULAR PURPOSE, OF RELIABILITY OR AVAILABILITY,
OF ACCURACY, OF LACK OF VIRUSES, OF QUIET ENJOYMENT,
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG
DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR
ENJOYMENT OF THE SOFTWARE, THAT THE FUNCTIONS
CONTAINED IN THE SOFTWARE WILL MEET YOUR
6. SOFTWARE TRANSFER. You may not transfer this EULA or the
rights to the Software granted herein to any third party unless it
is in connection with the sale of the mobile device which the
Software accompanied. In such event, the transfer must include
all of the Software (including all component parts, the media and
printed materials, any upgrades, this EULA) and you may not
retain any copies of the Software. The transfer may not be an
indirect transfer, such as a consignment. Prior to the transfer, the
end user receiving the Software must agree to all the EULA
terms.
7. EXPORT RESTRICTIONS. You acknowledge that the Software is
subject to export restrictions of various countries. You agree to
comply with all applicable international and national laws that
apply to the Software, including the U.S. Export Administration
Regulations, as well as end user, end use, and destination
restrictions issued by U.S. and other governments.
111
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL
BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY.
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON
APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THESE
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.
OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO
NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL
INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THIS LIMITATION MAY NOT APPLY TO YOU.
11. LIMITATION OF LIABILITY. Notwithstanding any damages that
you might incur for any reason whatsoever (including, without
limitation, all damages referenced herein and all direct or general
damages in contract or anything else), the entire liability of
Samsung under any provision of this EULA and your exclusive
remedy hereunder shall be limited to the greater of the actual
damages you incur in reasonable reliance on the Software up to
the amount actually paid by you for the Software or US$5.00. The
foregoing limitations, exclusions and disclaimers (including
Sections 9, 10 and 11) shall apply to the maximum extent
permitted by applicable law, even if any remedy fails its essential
purpose.
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN
OTHER DAMAGES. TO THE EXTENT NOT PROHIBITED BY LAW, IN
NO EVENT SHALL SAMSUNG BE LIABLE FOR PERSONAL INJURY,
OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF
DATA, BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR
USE OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF
OR FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES,
INFORMATION, SOFTWARE, AND RELATED CONTENT THROUGH
THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF
THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION
WITH ANY PROVISION OF THIS EULA, HOWEVER CAUSED,
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT
12. U.S. GOVERNMENT END USERS. The Software is licensed
only with "restricted rights" and as "commercial items"
consisting of "commercial software" and "commercial software
documentation" with only those rights as are granted to all other
end users pursuant to the terms and conditions herein.
Warranty Information
112
13. APPLICABLE LAW. This EULA is governed by the laws of
TEXAS, without regard to conflicts of laws principles. This EULA
shall not be governed by the UN Convention on Contracts for the
International Sale of Goods, the application of which is expressly
excluded. If a dispute, controversy or difference is not amicably
settled, it shall be finally resolved by arbitration in Seoul, Korea in
accordance with the Arbitration Rules of the Korean Commercial
Arbitration Board. The award of arbitration shall be final and
binding upon the parties.
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire
agreement between you and Samsung relating to the Software
and supersedes all prior or contemporaneous oral or written
communications, proposals and representations with respect to
the Software or any other subject matter covered by this EULA. If
any provision of this EULA is held to be void, invalid,
unenforceable or illegal, the other provisions shall continue in full
force and effect.
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Precautions for Transfer and Disposal
Richardson, Texas 75082
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
113
Phone: 1-888-987-HELP (4357)
©
2009 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
Warranty Information
114
Index
Making a Call — Number Entry
Dialing 15
Making a Call — Speed Dialing 17
Making a Call — Voice Dialing 18
Call Settings 83
Auto Retry 83
Call Answer 83
TTY Mode 83
Voice Privacy 83
Camera
Camera Options
Brightness 58
Color Effect 56
Quality 56
Resolution 55
Camera Settings
Memory 57
A
Alert 83
Alerts 82
Shutter Sound 57
Camera Shot Type 54
Charging the Battery
Travel Adapter 6
Clock Format 82
Contacts List
Group 32
Auto Key Lock 85
Auto Scroll 48
Auto View 48
B
Battery
Charging 5
Installing 4
Removing 5
C
Open 28
Calendar
Creating and Sending New Messages
D
Display Settings
Backlight 83
add appointment 79
Call Functions
Answering a Call 20
Shot Type 54
White Balance 56
Banner 82
115
Clock Format 82
Dialing Font Size 82
Info Panel 82
Shortcut Icon 83
Wallpaper 82
Messaging
Message Settings 47
microSD
Install 8
Remove 8
M-Ratings 99
Multimedia
Music Library 49
Music Player 49
Music Files
L
M
Memo Pad
Add a Memo 71
Memory Card
E
easyedgeSM 59
Emergency Calls 15
Entering Text 13
G
Install 8
Remove 8
Menu Style 82
Message Folders
Inbox 43
Outbox 44
Voicemail 46
Message Send Options 41
Message Settings
General 47
Picture 48
Text 48
Games 59
Loading 51
Getting Started
Understanding this User Manual 4
Go back one menu 27
H
Music Library 49
N
Notes, description 4
P
HAC 99
Health and Safety Information 87
I
Icon Glossary 86
International Calls 15
In-Use Menu 20
Pauses 16
Personal Organizer
Alarm Clock 72
Calculator 74
Message View 48
116
Phone
Command Keys 12
Display Screen 13
Features 9
View, Back 11
Phone Number 86
Version 86
Phone Settings
Airplane Mode 84
Language 84
Voicemail 43
Shortcut Icon 83
Sound Settings
Alerts 82
One-Touch Dialing 17
Two-Touch Dialing 17
Standard Limited Warranty 107
T
Text Conventions 4
Text message 38
Text Message Settings
Auto Scroll 48
R
Return to Last Menu 27
Roaming 26
S
SAR values 87
Security Settings 84
Change Lock 84
Emergency # 85
Lock Phone 84
Resetting Your Phone 85
Restriction 85
Settings 83
Call Settings 83
Camera Options 54
Language 84
Phone Settings 84
Setup
Security 84
Picture (Pic) Message
Creating and Sending 39
Q
Auto View 48
Time, Set 85
Location 81
117
Tip, description 4
Tools
About VoiceSignal 71
Choice List 69
Sound 71
Voicemail
Tools Menu 67
T-Ratings 99
Travel Adapter 6
TTY Mode 83
Turning Your Phone
Off 7
Checking 43
Listen 8
On 7
VoiceSignal
U
About VoiceSignal 71
UL Certification 88
Understanding Your Contacts
Adding a New Contact Entry 28
Deleting a Contact Entry 36
Editing an Existing Contact Entry 32
Finding a Contact Entry 30
Memory 37
W
Wallpaper 82
Warranty Information 107
Y
Your Phone
Pauses 33
Use the Travel Adapter 6
V
Version 86
Voice Dialing 18
Voice Launch 71
Voice Service 67
Voice Settings
118
|