Samsung SGH X506 User Manual

SGH-x506 Series  
P O R T A B L E Q u a d - B A N D  
M O B I L E P H O N E  
User Guide  
Please read this manual before operating your  
phone, and keep it for future reference.  
UZFD2_cb_x506_051706_F2  
Internet Address: http:/ / www.samsungusa.com  
©
2006 Samsung Telecommunications America, L.P. is a  
registered trademark of Samsung Electronics America,  
Inc. and its related entities.  
GH68-09276A  
Printed in Korea  
Openwave® is a registered Trademark of Openwave, Inc.  
RSA® is a registered Trademark RSA Security, Inc.  
Disclaimer of Warranties; Exclusion of Liability  
EXCEPT AS SET FORTH IN THE EXPRESS  
WARRANTY CONTAINED ON THE WARRANTY  
PAGE ENCLOSED WITH THE PRODUCT, THE  
PURCHASER TAKES THE PRODUCT "AS IS", AND  
SAMSUNG MAKES NO EXPRESS OR IMPLIED  
WARRANTY OF ANY KIND WHATSOEVER WITH  
RESPECT TO THE PRODUCT, INCLUDING BUT NOT  
LIMITED TO THE MERCHANTABILITY OF THE  
PRODUCT OR ITS FITNESS FOR ANY PARTICULAR  
PURPOSE OR USE; THE DESIGN, CONDITION OR  
QUALITY OF THE PRODUCT; THE PERFORMANCE  
OF THE PRODUCT; THE WORKMANSHIP OF THE  
PRODUCT OR THE COMPONENTS CONTAINED  
THEREIN; OR COMPLIANCE OF THE PRODUCT  
WITH THE REQUIREMENTS OF ANY LAW, RULE,  
SPECIFICATION OR CONTRACT PERTAINING  
THERETO. NOTHING CONTAINED IN THE  
INSTRUCTION MANUAL SHALL BE CONSTRUED TO  
CREATE AN EXPRESS OR IMPLIED WARRANTY OF  
ANY KIND WHATSOEVER WITH RESPECT TO THE  
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT  
BE LIABLE FOR ANY DAMAGES OF ANY KIND  
RESULTING FROM THE PURCHASE OR USE OF THE  
PRODUCT OR ARISING FROM THE BREACH OF  
THE EXPRESS WARRANTY, INCLUDING  
INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR  
BENEFITS.  
Table of Contents  
Table of Contents  
1
2
Table of Contents  
3
Section 1: Getting Started  
Topics Covered  
This section describes how to start using your phone  
by activating your service and setting up your Voice  
Mail.  
Section 1: Getting Started  
5
 
Activating Your Phone  
When you subscribe to a cellular network, a plug-in  
SIM card is provided loaded with your subscription  
details, such as your PIN and other optional services  
available.  
Removing the Battery  
1. If necessary, power-off the phone by holding down the  
key until the power-off image displays.  
2. Remove the battery by 1) sliding the battery lock up and  
holding it in position, then 2) lift the battery away, as  
shown.  
Installing the SIM Card  
Important! The plug-in SIM card and its contacts can be easily damaged  
by scratches or bending. Use caution when inserting or removing the card  
and keep all SIM cards out of reach from children.  
Make sure the gold contacts of the card face into the  
phone, then slide the SIM card into the socket.  
6
       
Activating Your Phone  
Removing the SIM Card  
To remove the SIM card, slide it away from the cross-  
bar. See the following illustration.  
Installing the Battery  
1. Align the battery tabs with the slots at the bottom of the  
phone.  
2. Press the battery down until it clicks into place. Make  
sure that the battery is properly installed before  
switching on the phone.  
Section 1: Getting Started  
7
   
Charging a Battery  
Your phone is powered by a rechargeable Li-ion battery.  
Use the travel adapter to charge the battery, and use  
only Samsung approved batteries and chargers.  
Note: You must fully charge the battery before using your phone for the  
first time. A discharged battery recharges fully in approximately 2–3 hours.  
You can use the phone while the battery is charging, but this causes the  
phone to charge more slowly.  
Note: For connection to an electrical supply not located in the U.S., you  
must use an adapter of the proper configuration for the power outlet. Use  
of the wrong adapter could damage your phone and void your warranty.  
1. With the battery in position on the phone, plug the  
connector of the travel adapter into the jack at the  
bottom of the phone.  
8
   
Activating Your Phone  
2. Plug the adapter into a standard AC wall outlet. When  
charging is finished, unplug the adapter from the power  
outlet.  
3. Press the buttons on both sides of the connector (1) and  
(2) pull the connector out.  
Note: You must unplug the adapter before removing the battery from the  
phone during charging to avoid damage.  
Low Battery Indicator  
When the battery is weak and only a few minutes of  
talk time remain, a warning tone sounds and the  
Warning Low Battery” message repeats at regular  
intervals on the display. The backlight turns off to  
conserve the remaining battery power.  
When the battery level becomes too low, the phone  
automatically turns off.  
Section 1: Getting Started  
9
 
Powering On or Off the Phone  
1. Open the phone.  
2. Press and hold the  
key until the phone power-on  
screen displays.  
3. If the phone is locked, enter the phone password and  
press the OK soft key or the key. The password is  
preset to 00000000” at the factory. For further details,  
4. If the phone asks for a PIN, enter the PIN and press the  
OK soft key or the key. For further details, see PIN  
The phone searches for your network and after finding it,  
the Idle screen displays. Now, you can make or receive  
calls.  
Note: The display language is preset to Automatic at the factory. To change  
the language, use the Language menu. For further details, see  
5. When you wish to switch off the phone, press and hold  
the  
key until the power-off image displays.  
Setting Up Your Voice Mail  
To access you voice mail from your keypad, use the  
following steps:  
1. Open the phone to access your keypad.  
2. From an Idle screen, press and hold the  
key.  
3. Follow the voice mail prompts to access messages.  
10  
       
Setting Up Your Voice Mail  
Accessing Your Voice Mail  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Highlight Recent Calls and press the Select soft key or  
the key.  
3. Highlight Voice Mail and press the Select soft key or the  
key.  
4. Highlight Connect to Voice Mail and press the OK soft  
key or the key.  
5. Voice Server appears in the display.  
6. Press the OK soft key or the key to dial your phone  
specified voice mail number.  
7. When connected, follow the voice prompts from the  
voice mail center.  
Changing the Voice Mail Number  
Your SIM card gives you the default service number of  
the voice mail center. However, you may need to  
change the number. Use the following procedures to  
change your voice mail number.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Highlight Recent Calls and press Select soft key or the  
key.  
3. Highlight Voice Mail and press the Select soft key or the  
key.  
4. Highlight Voice Server Number and press the OK soft  
key or the key.  
Section 1: Getting Started  
11  
   
5. Highlight Voice Server and press the OK soft key or the  
key.  
6. Press the Edit soft key to modify the number.  
Note: Pressing the key takes you directly into Edit mode.  
7. Enter your new Voice Server number and press the OK  
soft key to save.  
8. Press the  
key to return to Idle mode.  
12  
Section 2: Understanding Your Phone  
Topics Covered  
This section outlines some key features of your  
phone. It also displays the screen and the icons that  
are displayed when the phone is in use.  
Section 2: Understanding Your Phone  
13  
 
Features of Your Phone  
Your phone is lightweight, easy-to-use and offers many  
significant features. The following list outlines a few of  
the features included in your phone.  
User friendly, menu driven access to features and  
options.  
Multimedia capability  
Speakerphone capability  
Featured applications provide alarms, calendar, calculator,  
record audio, converter, timer, stopwatch, and world time.  
Front Views of Your Phone  
The following illustrations show the main elements of  
your phone.  
Front Closed View  
4. Antenna  
1. Headset  
Connector  
2. Volume/Menu  
Navigation Key  
3. Front LCD  
Keys  
The following list correlates to the open and front view  
illustrations.  
1. Headset Connector Allows you to plug in a headset  
for safe, convenient, hands-free conversations.  
14  
       
Front Views of Your Phone  
2. Volume/Menu Navigation key Allows you to adjust  
the ringer volume in standby mode or adjust the voice  
volume during a call. The volume key can also be used to  
scroll up or down to navigate through the different menu  
options. To mute the ringer during an incoming call,  
press the volume key up or down.  
3. Front LCD Your phone has an external display on the  
front of the phone. It indicates when you have an  
incoming call or message. It also displays date, time,  
reception, battery power, and any icons associated with  
alerts, such as messages, or a set alarm.  
4. Antenna Used to obtain maximum reception.  
Section 2: Understanding Your Phone  
15  
Front Open View  
14. Earpiece  
1. Display  
13. Navigation Key  
12. WAP Browser  
Menu Confirm Key  
2. Soft Key (Left)  
2. Soft Key (Right)  
11. End Key  
3. Send Key  
4. Clear Key  
5. Voice Mail Key  
10. Alphanumeric  
Keypad  
6. Asterisk/Shift  
Key  
9. Pound/Space/  
Quiet Mode Key  
8. Microphone  
7. Power Interface  
Connector  
Keys  
The following list correlates to the open and front view  
illustrations.  
1. Display This screen displays all the information  
needed to operate your phone.  
2. Soft key Performs the functions indicated by the  
screen text on the bottom of the display.  
16  
 
Front Views of Your Phone  
3. Send key Allows you to place or receive a call. In  
standby mode, press the key once to access the Recent  
Call log. If you press and hold the key down, you will  
initiate the most recent call from the Recent Call log.  
4. Clear key Deletes characters from the display when  
you are in text entry mode. When in a main menu, press  
to return to the previous menu.  
5. Voice Mail key Press and hold to automatically dial  
your Voice Mail.  
Enters the [*] character for calling  
6. Asterisk/Shift key —  
features. In text mode, press to change the character  
input type.  
7. Power Interface Connector The power interface  
connector is used to plug in the charging accessories.  
8. Microphone The Microphone allows the other callers  
to hear you clearly when you are speaking to them.  
[ ]  
9. Pound/Space/Quiet Mode key Enters the pound #  
character for calling features. In text entry mode, press  
to enter a space between characters. Press and hold to  
place handset in Quiet mode.  
10. Alphanumeric keypad Use these keys to enter  
numbers, letters and characters.  
11. End key Ends a call. Press and hold this key for a  
few seconds to power your phone On or Off. While in the  
main menu, it returns the phone to standby mode and  
cancels your input. When you receive an incoming call,  
press to reject call.  
Section 2: Understanding Your Phone  
17  
12. WAP Browser/Menu confirm key When navigating  
through a menu accepts the highlighted choice in the  
menu. If you press once in Idle mode, the WAP browser  
will launch.  
13. Navigation key This key allows you to scroll through  
phone menu options and provides a shortcut to phone  
functions from standby mode.  
14. Earpiece — The earpiece allows you to hear the other  
caller.  
Back Light  
A back light illuminates the display and the keypad  
when you press any key or open the phone. It turns off  
when no keys are pressed within a given period of  
time, and/ or dims the light, depending on the settings  
in the Back Light menu.  
Internal Display Layout  
The display has 3 areas:  
G
Icons  
Text and graphics area  
Menu Contacts  
Soft key function indicators  
Icons  
Shows the received signal strength. The greater the  
number of bars, the stronger the signal.  
18  
   
Internal Display Layout  
Appears when a new text message has been received.  
Appears when a new voice mail has been received.  
Appears when a new multimedia message has been  
received.  
Appears when you set an alarm to ring at a specified time.  
For details, see page Alarm” on page 118.  
Appears when you there is no network coverage available.  
Appears when a call is in progress.  
Appears when you are connected to a WAP service.  
G
Appears when the Call Forwarding feature is active. For  
details, see page Call Forwarding” on page 103.  
Appears when incoming call Alert Type is set to Vibration.  
Appears when an incoming call Alert Type is set to  
Vibration then Melody.  
Appears when Quiet Mode, Silent All is active.  
Appears when Quiet Mode, Vibration All is active.  
Shows the level of your battery. The more bars you see,  
the more power you have remaining.  
Section 2: Understanding Your Phone  
19  
Selecting Functions and Options  
Your phone offers a set of functions that can be  
customized for your ease and specific needs. These  
functions are arranged in menus and sub-menus,  
accessed using the two soft keys. Each menu and sub-  
menu allows you to view and alter the settings of a  
particular function.  
In some functions, you may be asked for a password or  
PIN. Enter the code and press the OK soft key or the  
key.  
When you access a list of options, your phone  
highlights the currently active option. If, however, there  
are only two options, such as On/Off or Enable/  
Disable, your phone highlights the option that is not  
currently active, so that you can select it directly.  
Selecting Options  
To view the various functions and options available  
and to select the one you want:  
Press the appropriate soft key.  
To select the function displayed or the option highlighted, press  
the Select soft key or the  
key.  
To view the next function or highlight the next option on a list,  
press the Down key or the key on the left side of the phone.  
To move back to the previous function or option on a list, press  
the Up key or the key on the left side of the phone.  
To move back up one level in the menu structure, press the Left  
navigation key or the Back soft key.  
To exit the menu structure without changing the settings, press  
the  
key.  
20  
   
Command Keys  
Command Keys  
Functions for the soft keys are defined by what appears  
above each in the display. There are two soft keys, the  
left soft key  
and the right soft key  
.
Soft Keys  
The roles of the soft keys vary depending on the  
function you are currently using; the labels on the  
bottom line of the display just above each key indicate  
their current role.  
Left soft key  
Right soft key  
Left Soft Key  
Some functions of the left soft key are as follows.  
In the Idle screen, press the Menu (left) soft key  
to open  
the Menu screen.  
When in a menu mode the left soft key  
Right Soft Key  
function is Select.  
Some functions of the right soft key are as follows.  
In the Idle screen, press the Contacts (right) soft key  
to  
open your Contacts List.  
When in a menu mode the right soft key  
function is Back.  
21  
Section 2: Understanding Your Phone  
         
Clear Key  
The CLR key  
or symbols from the display. You can also use  
is used to erase or clear numbers, text,  
to  
return to a previous menu or to return to standby mode  
from any menu.  
If you enter an incorrect character, briefly press  
backspace (and delete) the character.  
to  
To erase the entire sentence, press and hold  
.
To back up one menu level, briefly press  
.
End Key  
The End key  
is used to turn on/ off your phone,  
disconnect calls, and return to the standby mode.  
Press and hold the End key to turn on your phone.  
Briefly press once to disconnect a call.  
Press  
to return to standby mode from any menu, or to  
cancel the last input.  
Send Key  
The Send key  
is used to answer calls, dial calls, and  
to recall the last number(s) dialed, received, or missed.  
Press once to answer calls.  
Enter a number and briefly press  
Briefly press in standby mode to display a list of recent calls  
to make a call.  
to and from your phone.  
Press twice in standby mode to call the most recent  
number.  
Press  
to pick up a waiting call. Press  
back to the other call.  
again to switch  
22  
     
Command Keys  
Navigation Key  
Use the directional keys on the navigation key to  
browse menus, sub-menus, and lists. Press the up or  
down navigation when jumping to highlighted links on  
the web.  
Each key also acts as a shortcut to launch applications.  
All navigation keys are setup as *User-Defined  
Shortcut Keys. To set the shortcut key functions see  
Create Text  
Message*  
File Manager*  
Games*  
Contact List*  
Speakerphone Key  
During a call, use the speakerphone key  
in  
conjunction with the left soft key to activate the  
speakerphone operation. Use the volume keys (located  
on the left side of your phone) to adjust the volume.  
Section 2: Understanding Your Phone  
23  
   
24  
Section 3: Call Functions  
Topics Covered  
This section describes how to make or answer a call.  
It also includes the features and functionality  
associated with making or answering a call.  
Section 3: Call Functions  
25  
 
Making a Call  
When the Idle screen displays, enter the area code and  
phone number, and press the key.  
Note: When you activate the Auto Redial option in the Extra Settings menu,  
the phone will automatically redial up to 10 times when the person does  
not answer the call or is already on the phone. See page Extra Settings”  
on page 95 for further details.  
Making an International Call  
1. Press and hold the  
2. Enter the country code, area code, and phone number.  
Press the key.  
key. The + character appears.  
Correcting a Dialed Number  
Use the following steps to correct a mis-typed entry  
when dialing.  
1. After dialing a number  
To clear the last digit displayed, press the  
key.  
To clear another digit in the number, press the Left or Right  
navigation key until the cursor is immediately to the right of the  
digit to be cleared. Press the  
key.  
To enter a missing digit press the Left or Right navigation key  
until the cursor is in position and enter the digit.  
To clear the whole display, press and hold the  
key. The  
Idle screen displays.  
2. Press the  
Ending a Call  
key to return to the Idle screen.  
When you want to finish your call, briefly press the  
key.  
26  
         
Making a Call  
Redialing the Last Number  
All incoming, outgoing, and missed calls are listed in  
the Recent Calls Menu. If the number or caller is listed  
in your Contacts List, the name associated displays.  
To access the Recent Calls menu:  
1. From the Idle Screen, press  
navigation keys to highlight Recent Calls and press  
Select. All Calls is highlighted. Press the key. Or  
from the Idle Screen, press the key to display a list  
Menu. Use the  
of the most recent numbers used in the order you dialed  
or received them.  
2. Use the Up and Down navigation keys to scroll through  
the numbers until the number you want highlights.  
3. Use the Left and Right navigation keys to scroll through  
the Recent Calls options. Choose from All Calls, Missed  
Calls, Calls Made, Calls Received.  
4. To dial the number, highlight the number and press the  
key.  
Making a Call from the Contacts List  
You can store phone numbers that you use regularly on  
the SIM card or in the phones memory. These entries  
are collectively called the Contacts List.  
Once you have stored a number in the Contacts List,  
you can dial it by pressing a few keys using the Speed  
Dial feature.  
For further details about the Contacts List feature, see  
Section 3: Call Functions  
27  
   
Adjusting the Call Volume  
During a call, if you want to adjust the earpiece  
volume, use the Volume keys on the left side of the  
phone.  
Press the key to increase the volume level and the  
key to decrease the level.  
In Idle mode, you can also adjust the ringer volume  
using these keys.  
Answering a Call  
When a call is received the phone rings and displays  
the callers phone number, or name if stored in the  
Contacts List.  
1. From the Idle Screen, press the  
key or the Accept  
soft key to answer the incoming call.  
If the Anykey Answer option in the Extra Settings  
menu is activated, you can press any key to answer a  
call except the  
key and the Reject soft key.  
If the Open to Answer option in the Extra Settings  
menu is activated, you can answer the call simply by  
opening the phone.  
Note: To reject an incoming call, press and hold the Volume keys on the left  
side of the phone before opening the phone. A quick press of side volume  
key silences ringer on incoming call.  
2. End the call by closing the phone or by pressing the  
key.  
28  
       
Recent Calls  
Note: You can answer a call while using the Contacts List or menu  
features. After ending the call, the phone returns to the function screen you  
were using.  
Recent Calls  
The phone stores the numbers of the calls youve  
dialed, received, or missed in the Recent Calls menu. If  
the number or caller is listed in your Contacts List, the  
name associated displays.  
Viewing Missed Calls  
The number of calls you have missed displays on the  
Idle screen when a call is missed. To view the number  
details, use the following steps:  
1. If the phone is closed, open the phone.  
2. Press the View soft key or the  
key. The most recent  
missed call displays.  
Note: If there is a voice mail sent by the same number, associated icons  
display and can be selected.  
3. To scroll through the missed calls, press the Up or Down  
navigation key.  
Deleting a Missed Call  
To delete a missed call entry, use the following steps:  
1. Immediately after missing a call, press the View soft key  
or the  
key.  
Section 3: Call Functions  
29  
       
2. Press the Options soft key and select Delete. Press the  
Select soft key, or the Right navigation key, or the.  
key to display a sub-menu.  
3. Highlight Selected.  
Alternatively, to delete all of the numbers, select All.  
4. Press the Select soft key or the  
key to delete the  
number(s).  
5. At the Delete?” prompt, press the Yes soft key to  
confirm deletion or No to cancel.  
You can press the  
key at any time to exit the Missed  
Call feature.  
Call Time  
1. From the Idle Screen, press  
Menu. Use the  
navigation keys to highlight Recent Calls and press  
Select.  
2. Highlighted Call Time and press the Select soft key or  
the  
key.  
3. Use the Up and Down navigation keys to view the  
following information:  
Last Call Time shows the length of time for the last call.  
Total Sent shows the total length of time for the calls  
made.  
Total Received shows the total length of time for the calls  
received.  
4. Press the Reset soft key and enter the password  
00000000” and press the OK soft key to reset the call  
timers.  
5. Press the Back soft key or the  
key to end.  
30  
 
Recent Calls  
Data Volume  
1. From the Idle Screen, press  
Menu. Use the  
navigation keys to highlight Recent Calls and press  
Select.  
2. Highlighted Data Volume and press the Select soft key  
or the  
key.  
3. Use the Up and Down navigation keys to view the  
following information:  
Recent Volume shows the Sent, Received, and Total data  
size used.  
Total Volume shows the total volume of data sent and  
received from the phone.  
Reset Volume allows you to reset the data volume  
counters. Enter the password 00000000” and press the OK  
soft key.  
4. Press the Back soft key or the  
Data Call Time  
1. From the Idle Screen, press  
key to end.  
Menu. Use the  
navigation keys to highlight Recent Calls and press  
Select.  
2. Highlighted Data Call Time and press the Select soft  
key or the  
key.  
3. Use the Up and Down navigation keys to view the  
following information:  
Recent Time shows the time used for the last data call  
sent or received.  
Total Time shows the total time used to send or receive  
data.  
4. Press the Back soft key or the  
key to end.  
Section 3: Call Functions  
31  
   
Quiet Mode  
Quiet mode is convenient when you wish to stop the  
phone from making noise, in a theater for example.  
1. In Idle mode, press and hold the  
#
key until the  
Vibration All Activated” message and the Quiet  
Mode icon displays.  
In Quiet mode, your phone will vibrate and light up the  
external LCD display or just light the external LCD display  
depending on the setting in the Quiet Mode feature.  
2. To exit and reactivate the previous sound settings, press  
and hold the  
#
key again until Vibration All  
Deactivated” displays. The Quiet Mode icon no longer  
displays.  
Note: Quiet Mode can be set to Silent All. See also Quiet Mode” on page  
101 for more information.  
Options During a Call  
Your phone provides a number of control functions that  
you can use during a call.  
Putting a Call on Hold  
You can place the current call on hold whenever you  
want. You can make another call while you have a call  
in progress if your network supports this service.  
To put a call on hold:  
1. While on a call, press the Hold soft key. The call is on  
hold.  
2. You can reactivate the call whenever you want, by  
pressing the Retrieve soft key.  
32  
       
Options During a Call  
To make a call while you have a call in progress:  
1. Enter the phone number that you wish to dial or look it up  
in the Contacts List.  
2. Press the  
key to dial the second call. The first call is  
automatically put on hold.  
When you have an active call and a call on hold, you  
may switch between the two calls, changing the one on  
hold to active and placing the other on hold. To switch  
between the two calls, simply press the Swap soft key.  
The current call is placed on hold and the call on hold is  
reactivated so that you can continue conversing with  
that person.  
In Call Options  
During a call, press the Options soft key to access the  
following:  
Loud speaker ON/OFF — Allows you to enable the  
speakerphone option.  
Menu Access the phone’s Menu.  
Mute Silences the microphone for the selected call.  
Mute Keys Silences the key tones when on the call.  
Send DTMF Sends DTMF (Dual Tone Multi-Frequency) tones  
to the contacts you have selected.  
PhoneBook Access the Contacts List for phone information.  
If you have are in a multi-party call, the following  
options also display.  
Join — Joins the calls you have established with your phone.  
Transfer Transfers the call to another number entered.  
End Held Call Ends the call that is placed on hold.  
Section 3: Call Functions  
33  
 
When you want to finish, end each call normally by  
pressing the key.  
Switching off the Microphone (Mute)  
You can temporarily switch your phones microphone  
off, so that the other person cannot hear you.  
Example: You wish to say something to person in the room, but do not  
want the person on the phone to hear you.  
During a call, to switch the microphone off temporarily:  
1. Press the Options soft key.  
2. If necessary, press the Down key to highlight the Mute  
option.  
3. Press the Select soft key or the key. The other person  
can no longer hear you.  
To switch the microphone back on:  
1. Press the Options soft key.  
2. If necessary, press the Down key to highlight the  
Unmute option.  
3. Press the Select soft key or the key. The other person  
can hear you again.  
Muting or Sending Key Tones  
These options allow you to turn the key tones off or  
on. If the Mute Keys option is selected, your phone  
does not transmit the DTMF (Dual Tone Multi-  
Frequency) tones of the keys, which allows you to  
press keys without hearing annoying key tones  
during a call.  
34  
   
Options During a Call  
Note: To communicate with answering machines or computerized  
telephone systems, the Send Keys option must be selected.  
Searching for a Number in Contacts List  
You can search for a number in Contacts List during a  
call.  
1. Press the Options soft key.  
2. Press the Down key to highlight the PhoneBook option.  
3. Press the Select soft key or the key.  
The Contacts List entries are listed.  
4. If you enter the first few letters of the name, the Contacts  
List entries are listed starting with the first entry  
matching your input.  
5. To view the highlighted entry, press the key.  
For further details about the Contacts List feature, see  
Call Waiting  
The Call Waiting feature allows you to answer an  
incoming call while you have a call in progress, if this  
service is supported by the network, and you have set  
the Call Waiting-Voice Calls Menu to Activate. You are  
notified of an incoming call by a call waiting tone.  
To answer a call while you have a call in progress:  
1. Press the  
key or the Accept soft key to answer the  
incoming call. The first call is automatically put on hold.  
2. To switch between the two calls, press the Swap soft  
key.  
Section 3: Call Functions  
35  
       
To end a call on hold, press the Options soft key or the  
key and select the End Held Call option. Press the  
key.  
To end the current call, press the  
key.  
36  
Section 4: Menu Navigation  
Topics Covered  
This section explains the menu navigation for your  
phone. It also includes an outline of all the available  
menus associated with your phone.  
Section 4: Menu Navigation  
37  
   
Menu Navigation  
Menus and sub-menus can be accessed by scrolling  
using the Navigation keys or by using the shortcut  
keys.  
Accessing a Menu Function by Scrolling  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Scroll using the Navigation keys to reach a main menu  
Settings for example. Press the Select soft key or the  
key to enter the menu.  
3. If the menu contains sub-menus, Phone Settings for  
example, you can access them by pressing the Select  
soft key or the  
key. If the menu that you have  
selected contains further options, repeat this step.  
4. To scroll through the menus, press the Up or Down  
navigation key or the Volume key (located on the left  
side of your phone). Press the Select soft key, or the  
key to make your selection.  
5. To return to the previous menu level, press the Back soft  
key, the  
key or the Left Navigation key.  
6. To exit the menu without changing the settings, press the  
key.  
Using Shortcuts  
Numbered menu items, such as menus, sub-menus,  
and options can be quickly accessed by using their  
shortcut numbers. In Menu mode, Main Menus can be  
accessed by pressing the number keys (1 through 0)  
corresponding to their location on the screen.  
38  
     
In Use Menu Outline  
Example: Accessing the Language menu.  
1. Press the Menu soft key.  
wxyz  
2. Press the  
3. Press the  
4. Press the  
key for Settings.  
abc  
key for Phone Settings.  
key for Language.  
The available languages appear in the display.  
In Use Menu Outline  
Your phone includes a standby menu and an In-Use  
Menu. The In-Use Menu is available when youre on a  
call.  
Press  
Options while in a call to display the  
following:  
Loud speaker ON/OFF — Allows you to enable the  
speakerphone option.  
Menu Access the phone’s Menu.  
Mute Silences the microphone for the selected call.  
Mute Keys Silences the key tones when on the call.  
Send DTMF Sends DTMF (Dual Tone Multi-Frequency) tones  
to the contacts you have selected.  
PhoneBook Access the Contacts List for phone information.  
If you have are in a multi-party call, the following  
options also display.  
Join — Joins the calls you have established with your phone.  
Transfer Transfers the call to another number entered.  
End Held Call Ends the call that is placed on hold.  
Section 4: Menu Navigation  
39  
 
When you want to finish, end each call normally by  
pressing the  
key.  
Menu Outline  
The following list shows the menu structure and  
indicates the number assigned to each option.  
1
Recent Calls  
1.1  
1.2  
1.3  
1.4  
1.5  
All Calls  
Missed Calls  
Calls Made  
Calls Received  
Voice Mail  
1.5.1 Connect to Voice Mail  
1.5.1.1  
1.5.1.2  
Voice Server 1  
Voice Server 2  
1.5.2 Voice Server Number  
1.5.2.1  
1.5.2.2  
Voice Server 1  
Voice Server 2  
1.6  
1.7  
1.8  
Delete All  
Call Time  
Data Volume  
1.8.1 Recent Volume  
1.8.2 Total Volume  
1.8.3 Reset Volume  
Data Call Time  
1.9  
40  
   
Menu Outline  
2
Internet  
2.1  
2.2  
2.3  
2.4  
2.5  
Home  
Favorites  
Go to URL  
Browser Profiles  
Clear Cache  
3
4
Games  
Applications  
4.1  
4.2  
4.3  
4.4  
Alarm  
Calculator  
Record Audio  
Converter  
4.4.1 Currency  
4.4.2 Length  
4.4.3 Weight  
4.4.4 Volume  
4.4.5 Area  
4.4.6 Temperature  
Timer  
4.5  
4.6  
4.7  
Stopwatch  
World Time  
5
Messaging  
5.1  
Create New Message  
5.1.1 Text Message  
5.1.2 Multimedia Message  
Section 4: Menu Navigation  
41  
5.2  
My Messages  
5.2.1 Inbox  
5.2.2 Sent  
5.2.3 Outbox  
5.2.4 Drafts  
5.2.5 My Folders  
Templates  
5.3  
5.4  
5.5  
Delete All  
Settings  
5.5.1 Text Message  
5.5.1.1  
5.5.1.2  
5.5.1.3  
Send Settings  
Current Profile  
Text Message Profile  
5.5.2 Multimedia Message  
5.5.2.1  
5.5.2.2  
5.5.2.3  
Send Settings  
Receive Settings  
Multimedia Message Profile  
5.5.3 Push Message  
5.5.4 Broadcast*  
5.5.4.1  
5.5.4.2  
5.5.4.3  
Receive*  
Channel List*  
Language*  
5.6  
Memory Status  
6
7
Calendar  
File manager  
7.1  
Audio  
7.1.1 Get Ringtones  
42  
Menu Outline  
7.1.2 Downloaded Audio  
7.1.3 Record  
7.1.4 Recorded Audio  
7.1.5 Favorite Audio  
Graphics  
7.2  
7.3  
7.2.1 Get Graphics  
7.2.2 Downloaded Graphics  
7.2.3 Favorite Graphics  
Video  
7.3.1 Downloaded Video  
7.3.2 Favorite Video  
Other Files  
7.4  
7.5  
Memory Status  
8
Contacts  
8.1  
Contact List  
8.2  
Add New Contact  
8.2.1 Phone  
8.2.2 SIM  
8.3  
8.4  
8.5  
8.6  
8.7  
Group  
Speed Dial  
My Name Card  
Own Number*  
Management  
8.7.1 Default Saving  
8.7.2 Copy All to Phone  
8.7.3 Delete All  
8.7.4 Memory Status  
Section 4: Menu Navigation  
43  
8.8  
Service Number*  
9
Settings  
9.1  
Time & Date  
9.2  
Phone Settings  
9.2.1 Language  
9.2.2 Greeting Message  
9.2.3 Short Cut  
9.2.4 Extra Settings  
Display Settings  
9.3  
9.3.1 Wallpaper  
9.3.2 Skin  
9.3.3 LCD Brightness  
9.3.4 LCD Contrast  
9.3.4.1  
9.3.4.2  
Main LCD  
Front LCD  
9.3.5 Back Light  
9.3.6 Dialing Display  
Sound Settings  
9.4  
9.4.1 Incoming Call  
9.4.2 Keypad Tone  
9.4.3 Message Tone  
9.4.3.1  
9.4.3.2  
9.4.3.3  
Text Message  
Multimedia Message  
Broadcast  
9.4.4 Power On/Off  
9.4.5 Folder Tone  
9.4.6 Quiet Mode  
44  
Menu Outline  
9.4.7 Extra Tones  
Network Services  
9.5  
9.5.1 Call Forwarding  
9.5.1.1  
9.5.1.2  
9.5.1.3  
9.5.1.4  
9.5.1.5  
Forward Always  
Busy  
No Reply  
Unreachable  
Cancel All  
9.5.2 Call Barring*  
9.5.3 Call Waiting  
9.5.4 Network Selection*  
9.5.5 Caller ID  
9.5.6 Closed User Group*  
Security  
9.6  
9.6.1 PIN Check  
9.6.2 Change PIN  
9.6.3 Phone Lock  
9.6.4 Change Password  
9.6.5 Privacy  
9.6.6 SIM Lock  
9.6.7 FDN Mode  
9.6.8 Change PIN2  
Connection Settings  
Reset Settings  
9.7  
9.8  
* Shows only if supported by your SIM  
card.  
Section 4: Menu Navigation  
45  
46  
Section 5: Entering Text  
Topics Covered  
This section outlines how to select the desired text  
input mode when entering characters into your  
phone. This section also describes how to use the T9  
predictive text entry system to reduce the amount of  
key strokes associated with entering text.  
Section 5: Entering Text  
47  
   
Changing the Text Input Mode  
The Text Input option switches the key entry functions  
from T9 Mode, ABC Mode, Numeric Mode, and  
Symbols Mode.  
T9 Mode  
This mode allows you to enter words with only one  
keystroke per letter. Each key on the keypad has more  
than one letter; for example, pressing the 5 key can enter  
J, K, or L. However, the T9 mode automatically compares  
the series of keystrokes you make with an internal  
linguistic dictionary to determine the most likely word,  
thus requiring far fewer keystrokes than the traditional  
Alphabet mode.  
ABC Mode  
This mode allows you to enter letters by pressing the key  
labeled with the letter you want. Press the key once,  
twice, three, or four times until it displays.  
Numeric Mode  
This mode allows you to enter numbers.  
Symbols Mode  
This mode allows you to enter symbols, such as  
punctuation marks.  
When you are in a field that allows characters to be  
entered, you will notice the text input mode indicator  
on the display.  
48  
         
Using T9 Mode  
Text Input  
Mode Indicator  
1. To change the text input mode, press the  
2. Choose from the following options:  
AB mode  
key.  
Number mode  
T9 mode  
Note: In ABC mode press and hold the  
mode.  
key to access and exit T9  
Symbol mode  
Note: Press and hold the  
#
key to access Symbol mode. Press the  
number key corresponding to the symbol you want to enter. Use the Up and  
Down navigation keys to scroll through the available symbols. Press the  
Back soft key to exit.  
Using T9 Mode  
T9 Predictive Text input mode is based on a built-in  
dictionary.  
Section 5: Entering Text  
49  
   
Enter a Word in T9 Mode  
In T9 mode, begin entering a word by pressing the 2 to 9  
keys. Press each key only once for each letter. The built-  
in dictionary lists words that match the keystrokes you  
have entered.  
Example: To enter Hello, press  
mno  
ghi  
def  
jkl  
jkl  
,
,
,
,
The word that you are typing appears in the display. It  
may change with each key that you press.  
3. Enter the whole word before editing or deleting the  
keystrokes.  
4. When the word displays correctly, go to step 5.  
If the word doesnt display correctly, press the  
to display alternative word choices for the keys that you  
have pressed.  
key  
mno  
def  
Example: Both Of and Me” have the  
displays the most commonly used choice first.  
and  
keys. The phone  
#
5. Insert a space by pressing the  
key and start entering  
the next word.  
Add a New Word into the T9 Dictionary  
1. After pressing the keys corresponding to the word you  
want to add, press the  
words.  
key to display the alternative  
2. When the last alternative word is displayed, Add  
displays. Press the Add soft key or the key.  
3. Enter the word you want to add using ABC mode.  
4. Press the OK soft key or the key.  
50  
   
Using ABC Mode  
The word is added to the T9 dictionary and becomes the  
first word for the associated keypress series.  
Note: This feature may not be available for some languages.  
To enter periods, hyphens, colons, or parenthesis, press the  
key. T9 mode applies grammar rules to ensure that  
correct punctuation is used.  
To shift case in T9 mode, use the  
key. There are 3 cases:  
Initial capital, Capital lock, and Lower case.  
You can move the cursor by using the Left and Right keys. To  
delete letters, press the  
to clear the display.  
key. Press and hold the  
key  
Using ABC Mode  
To use the ABC Mode, use the  
your text.  
to  
keys to enter  
1. Press the key labeled with the letter you want:  
Once for the first letter  
Twice for the second letter  
And so on  
2. Select the other letters in the same way.  
Note: The cursor moves to the right when you press a different key. When  
entering the same letter twice or a different letter on the same key, just  
wait for a few seconds for the cursor to move to the right automatically,  
and then select the next letter.  
Keys  
abc  
`
Section 5: Entering Text  
51  
   
def  
ghi  
jkl  
mno  
pqrs  
tuv  
wxyz  
£ $  
% & ¥  
0
Space  
¤
Using Symbols  
Symbol mode enables you to insert symbols and  
punctuation marks into text.  
#
1. To enter symbol mode press and hold the  
key.  
2. To select a symbol, press the corresponding number key.  
3. To display more symbols, press the Up or Down  
Navigation key.  
4. To clear the symbol(s), press the  
key. When the  
input field is empty, this key returns the display to the  
previous mode.  
5. To insert the symbol(s) into your message, press the OK  
soft key or the key.  
Using Numbers  
Number mode enables you to enter numbers into a text  
message. Press the keys corresponding to the digits you  
want to enter.  
52  
       
Section 6: Understanding Your Contacts  
List  
Topics Covered  
This section allows you to manage your daily  
contacts by storing their name and number in your  
Contacts List. Contacts List entries can be sorted by  
name, entry, or group.  
Section 6: Understanding Your Contacts List  
53  
     
Using Contacts List  
Dialing a Number from Contacts List  
Once you have stored phone numbers in the Contacts  
List, you can dial them easily and quickly by using the  
location numbers that were assigned to them in the  
Contacts List.  
Finding a Contacts List Entry  
You can store phone numbers and their corresponding  
names in your SIM card and phones memories. They  
are physically separate but are used as a single entity,  
called Contacts List.  
Depending on your particular SIM card, the maximum  
number of phone numbers the SIM card can store may  
differ.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Contacts, press the Select soft key or the  
key. The Contacts menu appears in the display.  
3. Select Contact List and press the Select soft key or the  
key.  
4. Enter the first few letters of the name.  
The Contacts List entries are listed, starting with the first  
entry matching your input.  
5. To select a different entry, press the Up or Down  
Navigation key until the entry you want is highlighted.  
6. Once you have found the entry, press the  
key to dial  
the number, or press the Options soft key to access the  
Contacts List entry options.  
54  
         
Adding a New Contact  
Using Contacts List Entry Options  
While accessing any Contacts List entry, press the  
Options soft key to use the options for the entry.  
The following options are available:  
View allows you to view details for the Contacts List entry.  
Send Message allows you to send a text, or multimedia  
message to the Contacts List entry.  
Add New Contact allows you to add a new entry to the  
Contacts List. Choose Phone or SIM storage location.  
Delete allows you to delete the Selected or All phone book  
entries.  
Adding a New Contact  
Use the following procedures to store a new contact to  
your Phone or SIM Card.  
Storing a Number in the Phone’s Memory  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Contacts, press the Select soft key or the  
key. The Contacts menu appears in the display.  
3. Scroll to Add New Contact by pressing the Up or Down  
key and press the Select soft key or the key.  
4. Select Phone and press the Select soft key or the  
key.  
5. Enter the information on the Add New Contact screen.  
The following fields are available for input:  
First Name allows you to enter a first name for the number  
entered.  
Last Name allows you to enter a last name for the number  
entered.  
Section 6: Understanding Your Contacts List  
55  
         
Mobile assigns the number entered to the Mobile entry.  
Home assigns the number entered to the Home entry.  
Office assigns the number entered to the Office entry.  
Fax assigns the number entered to the Fax entry.  
Other allows you to enter additional numbers for the entry.  
Email allows you to enter an e-mail address for the  
contact.  
Graphic allows you to assign a caller ID image to the  
number you have entered. Press the key to display graphic  
menu. Choose from the following options:  
מ
 Downloaded Graphics assign a graphic that you have  
previously downloaded.  
מ
 Favorite Graphics assign a graphic that you have  
saved to the favorite graphics folder.  
מ
 Default Graphics assign a default (system delivered)  
graphic.  
מ
 None no graphic assigned to this contact entry.  
Ringtone allows you to assign a melody to the number  
contact entry. Press the key to display ringtone menu.  
Choose from the following:  
מ
 Default Sounds assign a default (system delivered)  
ringtone.  
מ
 Downloaded Sounds assign a ringtone that you have  
previously downloaded.  
מ
 Favorite Sounds assign a ringtone graphic that you  
have saved to the favorite sounds folder.  
מ
 None no sounds are assigned to this contact entry.  
Group allows you to assign an existing or create a new  
group entry to the number entered. Press the key to display  
groups. Press the Options soft key to Select or Add a new  
group.  
56  
Adding a New Contact  
Memo allows you to enter memos associated with the  
number entered.  
Tip: To change text entry mode press the  
key. For further details  
about how to enter characters, see “Using ABC Mode” on page 51.  
6. Press the Save soft key or the key to save new  
contact entry.  
7. The View screen appears in the display.  
8. Press the Options soft key to select from the following:  
Edit allows you to edit the contact information. Press the  
key to save.  
Send via allows you to create a text message, multimedia  
message.  
Delete allows you to delete the entry you have selected.  
Press Yes to confirm delete action, or No to cancel.  
9. To return to the Idle screen, press the  
key.  
Storing a Number in the SIM Card  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Contacts, press the Select soft key or the  
key. The Contacts menu appears in the display.  
3. Scroll to Add New Contact by pressing the Up or Down  
key and press the Select soft key or the key.  
4. Select SIM and press the Select soft key or the key.  
The Add New Contact screen displays.  
5. Enter the following information for the New Contact.  
Note: To change text entry mode press the  
key. For further details  
about how to enter characters, see “Using ABC Mode” on page 51.  
Name allows you to enter a name for the number entered.  
Section 6: Understanding Your Contacts List  
57  
     
Phone Number assigns the number entered to the Mobile  
entry.  
Location allows you to assign a location number on your  
SIM for the number being entered.  
Note: The Graphic, Alert, and Group options can be set at this point  
however the information must be saved to the phone and not the SIM.  
Graphic allows you to assign a caller ID image to the  
number you have entered. Press the key to display graphic  
menu.  
Ringtone allows you to assign a melody to the number  
entered. Press the key to display ringtone menu.  
Group allows you to assign an existing or create a new  
group entry to the number entered. Press the key to display  
groups. Press the Option soft key to Select or Add a new  
group.  
6. Press the Save soft key to save your entry.  
7. The View screen appears in the display.  
8. Press the Options soft key to display the following  
options:  
Edit allows you to edit the contact information. Press the  
key to save.  
Send Message allows you to send a text message or a  
multimedia message to this contact.  
Copy allows you to copy the contact information to the  
Phone or SIM card.  
Send via allows you to send a text message or multimedia  
message to the contact entry.  
Delete allows you to delete this contact entry information.  
9. To return to the Idle screen, press the  
key.  
58  
Group  
Dialing a Number from the SIM Card  
1. In Idle mode, enter the location number for the phone  
#
number you want to dial and press the  
key.  
The contact entry information is displayed.  
2. Press the Left or Right navigation key to find other  
numbers on the list.  
3. Press the Dial soft key, the  
key, or the key when  
you have selected the number you want to call.  
Group  
Creating a Group  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Contacts, press the Select soft key or the  
key.  
3. Scroll to Group by pressing the Up or Down key and  
press the Select soft key or the key.  
4. Press the Options soft key, select Add and press Select  
soft key.  
5. Enter the new group Name, Caller ID graphic, and  
Ringtone. Press the Save soft key.  
Editing a Caller Group  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Contacts, press the Select soft key or the  
key. The Contacts menu appears in the display.  
3. Scroll to Group by pressing the Up or Down key and  
press the Select soft key or the key.  
4. Scroll through the group list by pressing the Up or Down  
navigation key.  
Section 6: Understanding Your Contacts List  
59  
   
5. When the group you want to edit highlights, press the  
Options soft key. The following options are available:  
View allow you to view all contacts listed under the group.  
Add allows you to add a new group.  
Edit allows you to change the name of the group, an Alert,  
and assign a graphic ID.  
Use the Left or Right navigation keys update text.  
Use the Up or Down navigation keys to select the Caller ID and  
Ringtone options. Press the key to access the available  
options.  
Send Message allows you to create a text or multimedia  
message for the selected Contacts List entry.  
Delete allows you to delete the entry you have selected or  
all entries. Press Yes to confirm delete action, or No to cancel.  
6. When you are finished, press the  
key to return to Idle  
mode.  
Deleting a Caller Group  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Contacts, press the Select soft key or the  
key. The Contacts menu appears in the display.  
3. Scroll to Group by pressing the Up or Down key and  
press the Select soft key or the key.  
4. Press the Options soft key, select Delete and press  
Select soft key or the key. The Delete sub-menu  
display.  
5. Select from the following options:  
Selected deletes selected Group.  
All deletes all Groups listed.  
6. Select an option and press the Select soft key.  
60  
Speed Dial  
7. Press the Yes soft key to confirm deletion.  
8. When you are finished, press the  
key to return to Idle  
mode.  
Speed Dial  
Once you have stored phone numbers from your  
Contacts List list, you can set up to 8-speed dial entries  
and then dial them easily whenever you want, simply  
by pressing the associated numeric key.  
In Idle mode, to speed dial the numbers assigned to  
keys(2 to 9), press and hold the appropriate key.  
Setting Up Speed Dial Entries  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Contacts, press the Select soft key or the  
key. The Contacts menu appears in the display.  
3. Scroll to Speed Dial by pressing the Up or Down key,  
press the Select soft key or the key.  
4. Select the key in which you wish to assign the speed-  
dialing number (from the 2 to 9 keys), and press the  
Options soft key or the key.  
Note: Memory location 1 is reserved for your Voice mail server number.  
5. Choose from the following options:  
Add allows you to add from the Contact List or FDN List.  
Remove allows you to remove a speed dial entry.  
6. Select Add from the Speed Dial options menu and press  
the Select soft key or press the key. Your Contact  
List appears in the display.  
Section 6: Understanding Your Contacts List  
61  
     
7. Select the entry you would like to add and press the  
Select soft key or the key.  
8. The entry is saved and the name displays in the Speed  
Dial memory location.  
Changing a Number Assigned to a Key  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Contacts, press the Select soft key or the  
key. The Contacts menu appears in the display.  
3. Scroll to Speed Dial by pressing the Up or Down key,  
press the Select soft key or the key.  
4. Select the memory location you would like to change.  
5. Press the Options soft key, select Change and press the  
Select soft key or the key. Your Contact List appears  
in the display.  
6. Use the navigation keys to select the new speed dial  
entry to assign and press the Select soft key or the  
key.  
7. When you are finished, press the  
key to return to Idle  
mode.  
Deleting Speed Dial Entries  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Contacts, press the Select soft key or the  
key. The Contacts menu appears in the display.  
3. Scroll to Speed Dial by pressing the Up or Down  
Navigation key, press the Select soft key or the key.  
4. Select the number assigned key you want to remove.  
5. Press the Options soft key or the key, select Remove  
and press the Select soft key or the key.  
62  
My Name Card  
6. Press the Yes soft key to confirm removal.  
7. When you are finished, press the  
key to return to Idle  
mode.  
My Name Card  
The Name Card option is your contact information. You  
can attach your Name Card to a text or multimedia  
message. To create your name card, use the following  
steps:  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Contacts, press the Select soft key or the  
key. The Contacts menu appears in the display.  
3. Scroll to My Name Card by pressing the Up or Down  
Navigation key, press the Select soft key or the key.  
4. The My Name Card screen displays. Enter your contact  
more information.  
5. Press the Save soft key or the key.  
6. Press the Options soft key to access the following  
options:  
Edit allows you to edit the my name card entry.  
Send via allows you to send your name card in a text  
message or a multimedia message.  
Remove deletes the My Name Card entry.  
7. When you are finished, press the  
key to return to Idle  
mode.  
Section 6: Understanding Your Contacts List  
63  
   
Finding My Own Phone Number  
This function is a memory aid, which you can use to  
check your own phone number if you need to do so.  
You can assign a name to each of your own phone  
numbers registered on your SIM card. You can also edit  
the names and numbers. Any changes made here do  
not in any way affect the actual subscriber numbers on  
your SIM card.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Contacts, press the Select soft key or the  
key. The Contacts menu appears in the display.  
3. Select Own Number by pressing the Up or Down key  
and press the Select soft key or the key.  
4. Highlight Voice Line1, your mobile number displays in a  
pop up.  
5. Enter additional numbers in the 2, 3, and 4 fields.  
6. Press the key to Save.  
Management  
The Management option provides the ability to change  
the default settings for your phone.  
Default Saving  
The Default Saving option allows you turn on or turn  
off the auto-save or save prompt for your Phone and  
SIM entries. To access this function, use the following  
steps:  
1. When the Idle screen displays, press the Menu soft key.  
64  
         
Management  
2. Highlight Contacts, press the Select soft key or the  
key. The Contacts menu appears in the display.  
3. Select Management by pressing the Up or Down key  
and press the Select soft key or the key.  
4. Select Default Saving and press the key. Select from  
the following options:  
Phone saves all contact entry information to the phone.  
SIM saves all contact entry information to the SIM card.  
Ask on Saving prompts you to save contact information to  
Phone or SIM.  
Copy All to Phone  
You can copy all SIM entries to the Phone using the  
Copy All to Phone option. When you copy entries to  
the phone, duplicate entries are created.  
Note: Options are available for phone entries that are not available when  
stored to the SIM card. For details see Storing a Number in the Phone’s  
Delete All of the Contacts List Entries  
You can delete All, Phone, SIM, and SIM (FDN) entries  
from your phones memory.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Contacts, press the Select soft key or the  
key. The Contacts menu appears in the display.  
3. Scroll to Management by pressing the Up or Down  
Navigation key and press the Select soft key or the  
key.  
4. Highlight Delete All and press the Select soft key or the  
key.  
Section 6: Understanding Your Contacts List  
65  
   
5. Highlight the memory location you want to empty and  
press the key.  
You can remove the check mark by pressing the key.  
6. Press the Delete soft key to delete the entries in the  
selected memory location.  
7. Enter your phones password and press the OK soft key  
or the key.  
8. When the confirmation message appears, press the Yes  
soft key or the key to confirm deletion.  
Press the No soft key to cancel deletion.  
9. When you are finished, press the  
key to return to Idle  
mode.  
Checking the Memory Status  
You can check how many names and numbers are  
stored in the Contacts List, in both SIM card and the  
phone memory. You can also see the capacity of both  
memories.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Contacts, press the Select soft key or the  
key. The Contacts menu appears in the display.  
3. Scroll to Management by pressing the Up or Down  
Navigation key and press the Select soft key or the  
key.  
4. Select Memory Status by pressing the Up or Down  
Navigation key and press the Select soft key or the  
key.  
5. When you are finished viewing your phone’s Memory  
Status, press the  
key to return to Idle mode  
66  
 
Management  
Using the Service Dialing Numbers  
Your Contacts includes a list of Service Dialing  
Numbers (SDN) assigned by your service provider.  
These numbers include emergency numbers, customer  
service numbers and directory inquiries.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Contacts, press the Select soft key or the  
key. The Contacts menu appears in the display.  
3. Select Service Number, by pressing the Up or Down  
Navigation key and pressing the Select soft key or the  
key. The Service Number menu appears in the  
display.  
4. Highlight a Service Number by using the Up or Down  
Navigation key.  
5. To dial the number selected, press the  
key.  
Note: This menu is available only when your SIM card supports Service  
Dialing Numbers.  
Section 6: Understanding Your Contacts List  
67  
 
68  
Section 7: Messaging  
Topics Covered  
This section describes how to send or receive  
different types of messages. It also includes the  
features and functionality associated with messaging.  
Section 7: Messaging  
69  
   
Types of Messages  
Your phone provides the following message types:  
Text Messages  
Multimedia Messages  
Creating and Sending New Messages  
Text Messages  
Short Message Service (SMS) allows you to send and  
receive short text messages to and from other mobile  
phones. In addition, your phone supports the  
Enhanced Messaging Service (EMS), which enables you  
to include simple pictures, melodies, and animated  
images in your messages. To use this feature, you must  
subscribe to your service providers message service.  
The Message icon ( ) displays when you have  
received new text messages. When the memory is full,  
an error message displays and you cannot receive any  
new messages. Use the Delete option in each message  
box to delete obsolete messages.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Messaging and press the Select soft key or the  
key. Using the Up or Down Navigation key, highlight  
Create New Message and press the Select soft key or  
the key.  
3. Highlight Text Message and press the Select soft key or  
the key. The New screen appears.  
4. Create your message.  
70  
       
Creating and Sending New Messages  
5. When you have finished writing your message, press the  
Options soft key. Choose from the following options:  
Send Message allows you to send the message.  
Insert allows you to insert Text Templates, Contacts List, or  
Favorites.  
מ
 Text Templates allows you to apply one of the preset  
message templates to the text. Select one of the 10 items  
stored in the Text messages template menu.  
מ
Contacts allows you to add phone numbers to your  
message.  
מ
Favorites allows you to add internet addresses to your  
message.  
Add Content allows you to add a picture, animation, or  
melody to your message.  
מ
 Add Picture allows you to add a picture to your  
message.  
מ
 Add Animation allows you to add an animation to your  
message. Select between Emotions or My Animations.  
מ
Add Melody allows you to add a melody to your  
message. Select between Preset Melodies and My  
Melodies.  
Attach allows you to attach a Name Card, Schedule,  
Anniversary, Memo, or Task.  
Save Message to save the message in the Drafts folder or  
a folder you have created in the My Folder option.  
Language Select allows you to set the language to  
English, Français, or Español.  
Section 7: Messaging  
71  
Text Style allows you to format the style of the text. For the  
Text Size attribute, select Normal, Large, Small. For the Text  
Mode attribute, select Normal, Underline, or Strikethrough. The  
options Bold and Italic are set by using the key to place a  
check mark by them.  
Input Method allows you select the text input method. For  
example, (T9 AB, T9 Ab, T9 ab, Ab, AB, ab, Numeric, Symbols)  
6. Select Send Message and press the Select soft key or  
the key. Continue to the next step.  
Alternatively, select Save to to save the message in the  
Drafts folder. After saving the message, the display  
returns to the Create New Message menu list.  
7. Enter a destination number. If you want to send the  
message to multiple destinations, press the Down  
Navigation key after entering a number and repeat this  
step.  
8. When you have finished entering destination numbers,  
press the Options soft key. The following options  
display:  
Send allows you to send the message.  
Recent Recipient allows you to view a list of previous  
recipients destination numbers.  
Contacts allows you to add recipients to your Contacts  
List.  
Group allows you to create and add a new group.  
Save to save the message in the Drafts folder or a folder  
you have created in the My Folder option.  
Delete Destination allows you to delete the destination  
number.  
9. Select Send and press the Select soft key or the key  
to send message.  
72  
Creating and Sending New Messages  
Note: When you write a text message, the phone automatically splits it into  
several messages if your message exceeds the maximum number of  
characters allowed for sending. The number of split messages to be sent is  
shown each time your message is split. Depending on your service  
provider, the maximum number of characters may vary.  
Multimedia Messages  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Messaging and press the Select soft key or the  
key. Using the Up or Down Navigation key, highlight  
Create New Message and press the Select soft key or  
the key.  
3. Highlight Multimedia Message and press the Select  
soft key or the key.  
4. Using the Up or Down Navigation key, highlight a  
message content option and press the key.  
Alternatively highlight the message content option, press  
the Options soft key. The following options display:  
Subject  
מ
 Add allows you to enter subject text.  
מ
 Preview allows you to preview your messages before  
sending.  
מ
 Send allows you to send the message  
מ
 Save to saves the message to Drafts folder or a folder  
you have created in the My Folder option.  
מ
 Settings allows you to select a Delivery Report,  
Read Reply, Priority, Expiry Date, and Delivery After.  
מ
 Add Page allows you to add additional pages to your  
message.  
Section 7: Messaging  
73  
מ
 Delete Page deletes a page from your message.  
מ
 Edit Page allows you to edit selected page.  
מ
 Attach allows you to attach a Name Card, a  
Schedule, an Anniversary, a Memo, or Task to your  
message.  
5. Select Add, press the Select soft key or the key.  
6. Enter the subject text. When you have finished entering  
the subject, press the Options soft key. Choose from the  
following options:  
Save allows you to save subject.  
Insert allows you to add a message text from the  
Templates folder, an entry from the Contacts List, or a URL  
address in the Favorites folder.  
Save to save the message in the Drafts folder or a folder  
you have created in the My Folder option.  
Language Select allows you to change the language to be  
used in input mode.  
Input Method allows to select text input mode.  
7. Using the Up or Down Navigation key, highlight a  
message content option and press the key.  
Alternatively highlight the message content option, press  
the Options soft key. The following options display:  
Graphics and Videos  
מ
 Add Graphics allows you to add Downloaded  
Graphics and graphics saved in your Favorite Graphics  
folder.  
מ
 Add Video allows you to add Downloaded Videos  
and videos saved in your Favorite Videos folder.  
מ
 Preview allows you to preview the message before  
sending.  
74  
Creating and Sending New Messages  
מ
 Send allows you to send the message  
מ
 Save to saves the message to Drafts folder or a folder  
you have created in the My Folder option.  
מ
 Settings allows you to select a Delivery Report, Read  
Reply, Priority, Expiry Date, and Delivery After.  
מ
 Add Page allows you to additional pages to your  
message.  
מ
 Delete Page deletes a page from your message.  
מ
 Edit Page allows you to edit selected page.  
מ
 Attach allows you to attach a Name Card, a  
Schedule, an Anniversary, a Memo or Task to your  
message.  
Audio  
מ
 Add Audio allows you to add Record Audio,  
Recorded Audio, Downloaded Audio, or Favorite  
Audio.  
מ
 Preview allows you to preview the message before  
sending.  
מ
 Send allows you to send the message  
מ
 Save to saves the message to Drafts folder or a folder  
you have created in the My Folder option.  
מ
 Settings allows you to select a Delivery Report, Read  
Reply, Priority, Expiry Date, and Delivery After.  
מ
 Add Page allows you to additional pages to your  
message.  
מ
 Delete Page deletes a page from your message.  
מ
 Edit Page allows you to edit selected page.  
מ
 Attach allows you to attach a Name Card, a  
Schedule, an Anniversary, a Memo or Task to your  
message.  
Section 7: Messaging  
75  
Message  
מ
 Add allows you to add another page.  
מ
 Preview allows you to preview your messages before  
sending.  
מ
 Send allows you to send the message  
מ
 Save to saves the message to Drafts folder or a folder  
you have created in the My Folder option.  
מ
 Settings allows you to select a Delivery Report, Read  
Reply, Priority, Expiry Date, and Delivery After.  
מ
 Add Page allows you to additional pages to your  
message.  
מ
 Delete Page deletes a page from your message.  
מ
 Edit Page allows you to edit selected page.  
מ
 Attach allows you to attach a Name Card, a  
Schedule, an Anniversary, a Memo or Task to your  
message.  
When you have finished writing the message, press the  
Options soft key. Choose from the following options:  
Save allows you to save the text message you entered.  
Insert allows you to add message text from the Templates  
folder, an entry from the Contacts List, or a URL address from  
the Favorites folder.  
Save to save the message in the Drafts folder or a folder  
you have created in the My Folder option.  
Language Select allows you to change the language to be  
used in input mode.  
Input Method allows to select text input mode.  
8. When you have finished creating the messages, press  
the Options soft key and choose Send.  
76  
Retrieving New Messages  
9. Manually enter a number or press the Options soft key  
and select Contacts, and press the Select soft key or  
the key.  
To select a number from your Contacts List highlight the  
recipient and press the Select soft key or the key.  
10. When you have finished entering destination numbers,  
press the key.  
Alternatively, press the Options soft key, select Send  
and press the Select soft key.  
Retrieving New Messages  
While text messages from other phones are delivered  
directly to your phone, Multimedia messages will be  
stored in the Inbox of the message server and the server  
will alert you to new messages. Therefore you need to  
retrieve new messages to your phone and read them on  
the phone.  
Retrieving an Multimedia Message  
When a new Multimedia message comes in, the display  
shows the Multimedia Message icon ( ) and a text  
notification along with the senders number.  
1. Press the View soft key or the key to view brief  
information about the message, such as the sender’s  
number, the message size, and the subject.  
If you want to view the message later in the Inbox, press  
the Exit soft key.  
2. Press the Options soft key or the key to access the  
following options:  
Reply via Text Message allows you to reply to the  
message.  
Section 7: Messaging  
77  
 
Reply via Multimedia Message to allows you to reply  
to the message with a multimedia message. Choose to reply to  
the Sender or All.  
Forward allows you to forward the message to another  
person.  
Delete deletes the message.  
Extract Address allows you to move the address to the  
contacts list.  
Save Content saves the audio and/or video to the My  
Browser folders. Audio will save to audio folder, graphic will  
save to Graphics folder, and video will save to Video folder.  
Protection — locks the message to keep it from being  
deleted or unlocks the message.  
Properties shows you detailed information about the  
message.  
3. To scroll through the message, press the Up or Down  
key.  
4. When you have finished, press the  
key.  
Viewing Messages  
The My Messages screen provides 5 message folders. To  
access the Message folders, use the following steps:  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Messaging and press the Select soft key or the  
. Highlight My Messages and press the Select soft  
key or the key.  
3. Press the corresponding number to access the message  
folders.  
78  
 
Viewing Messages  
Inbox stores incoming SMS, Cell Broadcast (CB),  
Multimedia, and WAP messages.  
Sent stores the messages your phone successfully have  
sent.  
Outbox stores the messages your phone is attempting to  
send temporarily.  
Drafts stores the messages you have saved without  
sending or tried to send.  
My Folders allows you to create a folder that is used to  
store messages. You can create up to 5 message folders to  
manage your messages.  
Viewing a Message  
1. In Idle mode, press the Menu soft key and highlight  
Messaging. Press the Select soft key or the key.  
2. Highlight My Messages and press the Select soft key or  
the key.  
3. Highlight Inbox and press the Select soft key. The  
message list opens.  
The icons on the left of the number indicates the  
message type  
— indicates SMS  
— indicates Multimedia  
The icons on the left of the message subject indicate the  
memory location and the lock status.  
From the message list, you can access the following  
options by pressing the Options soft key.  
View opens the currently selected message.  
Delete deletes the currently selected message or all  
messages in the Inbox.  
Section 7: Messaging  
79  
Move to My Folder allows you to move the message to  
one of the folders you have defined.  
Sort by allows you to sort messages by predefined  
criterion.  
Protection — locks the message to keep it from being  
deleted or unlocks the message.  
Properties shows the message Subject, From, Message  
Size, Transaction ID, Msg Class, MMS Version, To, Priority, and  
Date.  
4. Select a message on the list. The message content  
displays.  
5. Press the Up or Down key to scroll through the message  
screen. For an Multimedia message, press the Left or  
Down key to scroll to other pages, if the message has  
more than one message.  
6. When you have finished, press the  
key.  
Managing Your Own Message Folders  
You can create up to 5 message folders to store  
messages separately from the default message folders.  
Creating a Message Folder  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Highlight Messaging and press the Select soft key or  
the key.  
3. Highlight My Messages and press the Select soft key or  
the key.  
4. Highlight My Folders and press the Select soft key or  
the key.  
80  
 
Managing Your Own Message Folders  
5. The Create Folder?” pop-up screen displays the when  
there are no folders created.  
6. Press  
Yes to create a new folder. Press  
No to  
cancel and return to the previous menu.  
7. If you selected Yes, enter the folder name and press the  
OK.  
8. When you have finished, press the  
key.  
Moving a Message to a Message Folder  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Messaging and press the Select soft key or the  
key.  
3. Highlight My Messages and press the Select soft key or  
the key.  
4. Select Inbox and press the Select soft key or the  
key.  
5. Select the message you want to move and press the  
Options soft key.  
6. Select Move to My Folders and press the Select soft  
key or the key. Move to My Folders sub-menu  
displays.  
7. Select one of the folders you have defined and press the  
Select soft key or the key. The message is moved to  
the folder.  
8. When you have finished, press the  
key.  
Renaming a Message Folder  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
Section 7: Messaging  
81  
2. Select Messaging and press the Select soft key or the  
key. Using the Up or Down Navigation key highlight  
My Messages and press the Select soft key or the  
key.  
3. Select My Folders. The folder list displays.  
4. Scroll to the folder you want to rename and press the  
Options soft key, select Rename Folder and press the  
Select soft key or the key.  
5. Clear the current name and enter a new name.  
6. Press the OK soft key or the key.  
7. When you have finished, press the  
key.  
Deleting a Message Folder  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Messaging and press the Select soft key or the  
key. Using the Up or Down Navigation key highlight  
My Messages and press the Select soft key or the  
key.  
3. Select My Folders. The folder list displays.  
4. Scroll to the folder you want to delete.  
5. Press the Options soft key and select Delete.  
6. Press the Yes soft key or the key to confirm the  
deletion.  
7. When you have finished, press the  
key.  
Using Message Options  
While viewing the content of a message, press the  
Options soft key to access the following options:  
82  
 
Using Message Options  
Options for SMS Messages  
Reply allows you to reply to the message via Text message.  
Forward allows you to forward the message.  
Delete deletes the message.  
Move to Phone/Move to SIM — If a message is stored in the  
SIM card, it is saved to the phone’s memory. If a message is  
stored in the phone’s memory it is saved to the SIM card.  
Extract Address allows you to save the recipient or  
sender’s number and URL, Email addresses or phone numbers  
from the message text.  
Save Content/Attach allows you to save media items, such  
as sounds or images, from the message into your phone’s  
memory. You can then use the items when writing a message.  
Note, their must a media file attached to the message for this  
option to be available.  
Protection allows you to lock the message, keeping it from  
being deleted. Also, use to unlock the message.  
Options for Multimedia Messages  
Reply via Text Message allows you to reply to the message  
via Text message.  
Reply via Multimedia Message allows you to reply to the  
message via Multimedia message. Choose Sender (replies to  
sender only) or All (replies to all contacts on the message).  
Forward allows you to forward the message to addresses or  
phone numbers.  
Delete deletes the message.  
Extract Address allows you to save the recipient or  
sender’s number and URL, Email addresses or phone numbers  
from the message text.  
Save Content allows you to save media items, such as  
sounds or images, from the message into your phone’s  
memory. You can then use the items when writing a message.  
Section 7: Messaging  
83  
Note, their must a media file attached to the message for this  
option to be available.  
Protection allows you to lock the message, keeping it from  
being deleted. Also, use to unlock the message.  
Properties provides the following information: Subject,  
From, Message Size, Transaction ID, Msg Class, MMS Version,  
To, Priority, and Date.  
Using Message Templates  
Your phone has message templates to allow you to  
retrieve them when creating a message. You can change  
the templates as your preferences or send a message  
immediately.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Messaging and press the Select soft key or the  
key.  
3. Highlight Templates and press the Select soft key or the  
key.  
4. Highlight a template and press the Options soft key to  
access the following options:  
Edit allows you to change the template.  
Send Message allows you to send an SMS message  
using the template.  
Delete deletes the template.  
Add New allows you to add a frequently used message to  
the template list.  
5. When you have finished, press the  
key.  
84  
 
Deleting Messages  
Deleting Messages  
You can delete the messages in each message folder(s)  
individually or all at one time. You can also delete all of  
your messages at one time.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Messaging and press the Select soft key or the  
key. Using the Up or Down Navigation key highlight  
Delete All and press the Select soft key or the  
key.  
3. Select the message folder(s) you want to empty. Use the  
Navigation keys to highlight the folder and press the  
key to mark the folder you want to delete.  
4. To delete all of the messages in all folders, select All  
Messages.  
5. Press the Delete soft key. At the With Protection” pop-  
up, press the  
key to mark files with protection to be  
deleted or press the Yes soft key to delete.  
6. Press the Yes soft key or the  
7. When you have finished, press the  
Deleting Individual Messages  
key to confirm deletion.  
key.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Messaging and press the Select soft key or the  
key. Using the Up or Down Navigation key highlight  
My Messages and press the Select soft key or the  
key.  
3. Highlight Inbox and press the Select soft key or the  
key.  
Section 7: Messaging  
85  
 
4. Select an individual message you want to delete and  
press the Options soft key. Highlight Delete and press  
the Select soft key. Choose from Selected or All and  
press the Select soft key.  
5. Press the Yes soft key or the  
key to confirm the  
deletion.  
6. When you have finished, press the  
key.  
Settings  
You can set up various options for using messaging  
services.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Messaging and highlight Settings. Press the  
Select soft key or the  
3. Select the type of messages for which you want to  
change. Press the Select soft key or the key.  
Text Message  
The following options are available:  
key.  
Send Settings allows you to set the following options:  
Reply Path (SIM Dependent) allows the recipient of your  
message to send you a reply through your message center, if  
your network supports this service.  
Delivery Report (SIM Dependent) allows you to activate  
or deactivate the report function. When this function is  
activated, the network informs you whether or not your  
message has been delivered.  
86  
 
Settings  
Bearer Selection allows you to select either GSM or GPRS  
Preferred, depending on your network.  
Current Profile allows you to select an option for sending a  
text message.  
Text Message Profile allows you to set the options for  
sending text messages.  
Multimedia Message  
The following options are available:  
Send Settings:  
Delivery Report — when this option is enabled, the network  
informs you whether or not your message has been  
delivered.  
Read Reply — when this option is enabled, your phone  
sends a request for a reply along with your message to the  
recipient.  
Priority you can select the priority level of your messages.  
Expiry Date — you can select the length of time your  
messages are stored in the message center after they are  
sent.  
Delivery After you can set a time delay before the phone  
sends your messages.  
Receive Settings — you can specify the category of messages  
you want to retrieve. Allows you to set the following:  
Anonymous Reject — rejects messages with a category of  
anonymous.  
Advert Allowed allows messages with a category of  
advertisement.  
Information Allowed allows messages with the category  
of information.  
Report Allowed allows messages with a report.  
Section 7: Messaging  
87  
Auto Download automatically downloads the message  
from the server.  
Multimedia Message Profile — you can select a connection  
profile to be used for sending and receiving Multimedia  
messages.  
Push Message  
The following options are available:  
Receive you can select whether the phone receive or reject  
push-messages from the WAP server. Choose from Never,  
Always, or SMS-C Specific.  
Service Center enter a service center number to receive  
SMS messages.  
Broadcast  
The following options are available:  
Receive allows you to enable or disable the reception of  
broadcast messages.  
Channel List allows you to indicate the channels from  
which you wish to receive broadcast messages. The following  
options are available:  
Save — use to save the channel for future use.  
Add Channel — use to enter the ID and title for a new  
channel.  
Delete use to remove a channel from the list.  
Edit — use to change the ID and title of an existing channel.  
Language allows you to select your preferred language in  
which to display cell broadcast messages.  
Please contact your service provider for further details.  
88  
Memory Status  
Memory Status  
You can check the amount of the memory being used  
and the memory remaining for multimedia messages.  
The display shows the total space including the used  
and free space. You can also view how much space is  
currently occupied by each message box.  
Section 7: Messaging  
89  
 
90  
Section 8: Changing Your Settings  
Topics Covered  
This section explains the sound and phone settings  
for your phone. It includes display settings, security  
settings, and extra settings associated with your  
phone.  
Section 8: Changing Your Settings  
91  
 
Time & Date  
This menu allows you to change the current time and  
date displayed. You can also find out what time it is in  
another part of the world.  
Note: Before setting the time, you must specify your time zone in the  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Settings and press the Select soft key or the  
key.  
3. Select Time & Date and press the Select soft key or the  
key.  
The following options are available. Use the Down  
Navigation key to scroll to and set options:  
Set Time allows you to enter the current time using your  
keypad.  
AM/PM use the Left or Right Navigation key to select AM  
or PM.  
Time Format allows you to change the time format to 12  
hours or 24 hours. Use the Left or Right Navigation key to  
select Time Format.  
Set Date allows you to enter the current date using your  
keypad.  
Starting Day of Calendar allows you to set the starting  
day of your calendar. Select Start with Sunday or Start with  
Monday.  
Auto Update allows you to receive time information from  
your service provider’s network. Use the Left or Right  
Navigation key to set Auto UpDate.  
92  
     
Phone Settings  
מ
 Off you need to manually set the time and date  
according to the current time zone using the Set time  
menu.  
מ
 On — the phone automatically updates the time and date  
according to the current time zone using the network  
service.  
מ
 Confirm First — the phone asks for a confirmation before  
the update.  
4. Press the Save soft key or the  
to save your Time &  
Date settings.  
Note: Automatic updates of time and date do not change the times you  
have set for alarm settings or calendar memos.  
Phone Settings  
To customize the settings of your phone use the  
following steps:  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Settings and press the Select soft key or the  
key.  
3. Using the Up or Down Navigation key highlight Phone  
Settings and press the Select soft key or the  
key.  
The following options are available:  
Section 8: Changing Your Settings  
93  
     
Language  
You can select a display language. When the language  
option is set to Automatic, the language is  
automatically selected according to the language of the  
SIM card used.  
Depending on your country, service provider, or the  
software version of the phone, the Automatic option  
may not display.  
Greeting Message  
This menu allows you to set a greeting to be displayed  
briefly when the phone is switched on.  
For details about entering characters, see “Section 5:  
Short Cut  
Only in Idle mode, Navigation keys can be used as  
shortcut keys. They allow you to access specific menus  
directly.  
To assign a shortcut to a key:  
1. From the Phone Settings menu, select Short Cut.  
2. Using the Navigation key, highlight the Navigation key to  
be used as a shortcut key and press the  
.
3. Select the menu to be assigned to the key and press the  
Select soft key or the  
key. An icon associated with  
your selection will display.  
Note: To deactivate a shortcut key, press the Options soft key and select  
Remove or Remove All.  
94  
     
Phone Settings  
Extra Settings  
You can turn the automatic redialing or answering  
features on or off.  
1. To turn a feature on, press the  
key. A check mark  
displays in front of the option.  
2. To turn a feature off, press the  
key. The check mark  
no longer displays.  
3. Press the Save soft key to save changes.The following  
options are available:  
Note: The interval between call attempts varies.  
Auto Redial when this option is checked, the phone  
makes up to ten attempts to redial a phone number after an  
unsuccessful call.  
Open to Answer when this option is checked, you can  
simply open the phone to answer a call. When it is unchecked,  
you must open the phone and press a key to answer a call,  
depending on the setting of the Anykey answer option. See  
below.  
Anykey Answer when this option is checked, you can  
answer an incoming call by pressing any key, except the  
key or the Reject soft key. To reject the call, press the  
key  
or the Reject soft key. When this option is unchecked, you  
must press the  
key or Accept soft key to answer a call.  
Section 8: Changing Your Settings  
95  
 
TTY Setting  
TTY [Teletypewriter — also known as a TDD  
(Telecommunication Device for the Deaf) or Text  
Telephone] is a telecommunications device that allows  
people who are deaf or hard of hearing, or who have  
speech or language disabilities, to communicate using a  
telephone.  
Note: The TTY option is viewable only when a TTY Adapter is inserted into  
the headset jack on the left side of your phone.  
Use the following steps to access the TTY settings:  
1. Connect the TTY to the headset jack on the left side of  
your phone.  
2. In Idle mode, press the Menu soft key to access Menu  
mode.  
3. Select Settings and highlight Phone Settings. Press the  
Select soft key or the  
key.  
jkl  
4. Press  
(this will not be shown in the menu).  
The following options are available:  
Enable TTY is available for use.  
Disable TTY is not available for use.  
5. Highlight the Enable selection. Key in the password:  
4-T-T-Y (4889) and press the OK soft key.  
For additional technical support you may access the  
following website or call 1-888-987-4357.  
http:/ / www.samsungtelecom.com/ contact_us/ accessibility.asp  
96  
Display Settings  
Display Settings  
In this menu, you can change various settings for the  
display or backlight.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Settings and press the Select soft key or the  
key.  
3. Select Display Settings and press the Select soft key or  
the  
key.  
The following options are available. Use the Down  
Navigation key to scroll to and set options:  
Wallpaper  
This menu allows you to change the background image  
or the color of the text to be displayed in Idle mode.  
The following options are available:  
Get Graphics allows you access WAP browser to download  
new graphics.  
Wallpaper List allows you to select from a list of Default  
Wallpapers, Downloaded Graphics and Favorite Graphics.  
Highlight Wallpaper List and press the  
wallpaper option and press the Select soft key or the  
Select the wallpaper you would like to apply. Press the Options  
soft key and highlight Select and press the key.  
key. Select a  
key.  
Alternatively, select View to display the wallpaper in the  
display. Use the Left or Right Navigation key to scroll through  
Wallpaper List. Press the Select soft key to apply selected  
wallpaper.  
Text Position allows you to select the position of the text  
displayed in Idle mode. Press the Left or Right Navigation keys  
to make your selection.  
Section 8: Changing Your Settings  
97  
     
Text Mode allows you to select a text format. Choose  
Normal, Outline, or Shadow. Press the Left or Right  
Navigation keys to make your selection.  
Text Color allows you to select the color of the text to be  
displayed on the Idle screen. Press the Left or Right Navigation  
keys to make your selection.  
Graphic Logo allows you to display your service provider’s  
logo instead of its’ name. Press the Left or Right Navigation  
keys to make your selection.  
Off — the service provider’s name displays in the Idle mode.  
On — the service provider’s logo stored in your phone  
displays in Idle mode; if no logo has been stored, the service  
provider’s name displays.  
Press the Save soft key or the  
key to save changes.  
Skin  
You can select the color of the menus displayed. You  
can choose from pattern 1 - 4.  
LCD Brightness  
You can adjust the display brightness for the Main LCD  
to see it better in different lighting conditions.  
Press the Left or Right Navigation key or press the  
Volume keys to adjust the brightness.  
LCD Contrast  
Press the Left or Right Navigation key to adjust the  
Main LCD and Front LCD contrast. Press OK to accept  
changes.  
Back Light  
In this menu, you can select the length of time for the  
Main LCD backlight and the Main LCD Dim.  
98  
Sound Settings  
Main LCD On Settings available are: 15 seconds, 30  
seconds, 1 minute, 3 minutes, and 10 minutes.  
Main LCD Dim Settings available are: 15 seconds, 30  
seconds, 1 minute, 3 minutes, and Off.  
Dialing Display  
In this menu, you can select the dialing font color.  
Choose Rainbow or Basic.  
Sound Settings  
You can customize various sound settings.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Settings and press the Select soft key or the  
key.  
3. Select Sound Settings and press the Select soft key or  
the  
key.  
The following options are available. Use the Down  
Navigation key to scroll to and set options:  
Incoming Call  
This menu allows you to make a selection from the  
following categories:  
Get Ringtones allows you to access the internet to purchase  
and download a new ringtone.  
RingTone allows you to select from the preloaded ringtones.  
RingVolume allows you to set the default volume for your  
ringer to sound when receiving an incoming call.  
Alert Type allows you to set the alert default. Choose from  
Melody, Vibrate, or Vibrate then Melody.  
Section 8: Changing Your Settings  
99  
   
Press the Left or Right Navigation key to make  
selection  
Press the Save soft key or the  
key to save changes.  
Keypad Tone  
This menu allows you to select the tone and volume  
when you press the keypad.  
1. Use the Navigation keys to change On/Off to On.  
2. Use the Navigation keys to select a Tone from Voice,  
DTMF, Beep, Drum, Rain Drop.  
3. Use the Navigation keys to increase or decrease the  
Volume (1 5).  
Message Tone  
This menu allows you to select how the phone informs  
you that a new SMS, MMS, or Broadcast message has  
been received.  
For each message tone, the following options are  
available:  
Tone you can select a message tone.  
Mode you can select a type of message alert.  
Off — the phone does not use the SMS tone.  
Tone — the phone sounds the selected message tone.  
Vibration — the phone vibrates.  
Repetition you can select how often the phone informs you  
of a new message.  
Once — the phone alerts you to a new message just once at  
the time of its receipt.  
Every 2 Min. — the phone alerts you one time to a new  
message every 2 minutes until you open the message.  
100  
 
Sound Settings  
Press the Left or Right Navigation key to make  
selection  
Press the Save soft key or the  
key to save changes.  
Power On/Off  
This menu allows you to select the melody that the  
phone sounds when it is switched on and off.  
Press the Up or Down Navigation key to make  
selection.  
Press the Select soft key or the  
key to save changes.  
To turn off the sound, select Off.  
Folder Tone  
This menu allows you to select the melody that the  
phone sounds when the flip is being opened.  
Press the Up or Down Navigation key to make  
selection.  
Press the Select soft key or the  
key to save changes.  
To turn off the sound, select Off.  
Quiet Mode  
This menu item allows you to select what mode your  
phone will go in when you press and hold the  
You can choose Vibration All or Silent All.  
key.  
#
When Vibration All is selected your phone will only  
vibrate.  
When Silent All is selected your phone will not make a  
sound or vibrate.  
Section 8: Changing Your Settings  
101  
 
Press the Up or Down Navigation key to make  
selection  
Press the Select soft key or the  
Extra Tones  
key to save changes  
You can customize additional tones for the phone.  
1. To turn a given tone on, press the  
key. A check mark  
displays in front of the option.  
2. To turn a given tone off, press the  
key. The check  
mark no longer displays in front of the option.  
The following options are available:  
Error Tone — this menu allows you to choose whether or not  
the phone sound when you perform an improper function.  
Minute Minder sets whether or not the phone beeps every  
minute during an outgoing call to keep you informed of the  
length of your call.  
Connection Tone sets whether or not the phone to beep  
when your call is connected to the system.  
Alerts on Call — this menu allows you to choose whether or  
not the phone informs you when you receive a new message or  
when the time for an alarm comes during a call.  
Indicative Tone sets whether or not the phone plays tone  
to inform you when you have completed the function.  
Network Services  
The Network Service Settings allow you to manage the  
settings associated with your calls.  
102  
       
Network Services  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Settings and press the Select soft key or the  
key.  
3. Select Network Services and press the Select soft key  
or the  
key.  
The following options are available. Use the Down  
Navigation key to scroll to and set options:  
Call Forwarding  
This network service enables incoming calls to be  
rerouted to the number that you specify.  
Example: You may wish to forward your business calls to a colleague while  
you are on holiday.  
To set your call forwarding options:  
1. From the Network Services menu, select Call  
Forwarding.  
2. Select a call forwarding option by pressing the Up or  
Down key and then press the Select soft key or the  
key.  
The following options are available:  
Forward Always all calls are forwarded.  
Busy calls are forwarded when you are already on another  
call.  
No Reply calls are forwarded when you do not answer the  
phone.  
Unreachable calls are forwarded when you are not in an  
area covered by your service provider or when your phone is  
switched off.  
Section 8: Changing Your Settings  
103  
 
Cancel All all call forwarding options are canceled.  
3. Select the call type, Voice Calls or Data Calls, by  
pressing the Up or Down key, and then press the Select  
soft key or the  
key.  
4. Using the Left or Right Navigation key select Activate.  
Select Deactivate to turn off call forwarding.  
5. Scroll to Divert To, enter or change the number to be  
called.  
To enter an international code, press the 0 key until the +  
sign displays.  
6. Press the Select soft key to save changes.  
Call Barring (SIM Dependent)  
The call barring network service allows you to restrict  
your calls. This option is SIM dependent and requires a  
subscription. For more information, contact your  
service provider.  
Call Waiting  
This network service informs you when someone is  
trying to reach you during another call.  
You can specify individual call waiting options for  
voice calls and/ or data calls.  
To set your call waiting options:  
1. From the Network Services menu screen, select Call  
Waiting.  
2. Select the call type, Voice or Data, to which the call  
waiting option is to be applied by pressing the Up or  
Down Navigation key and then press the Select soft key  
or the  
key.  
104  
 
Network Services  
The screen informs you whether call waiting is activated  
or deactivated.  
Select Cancel All to cancel all call waiting features.  
3. Using the Up or Down Navigation key you can Activate  
or Deactivate the call waiting feature respectively.  
4. Press the Select soft key to apply selection.  
Network Selection (SIM Dependent)  
The Network Selection feature enables you to  
automatically or manually select the network used  
when roaming outside of your home area.  
Note: You can select a network other than your home network only if there  
is a valid roaming agreement between the two.  
To indicate to automatically or manually select the  
network to be used when roaming:  
1. From the Network Services menu screen, select  
Network Selection.  
2. Press the Up or Down key until the appropriate option  
highlights, then press the OK soft key or the  
key.  
If you select Automatic, you are connected to the first  
available network when roaming.  
If you select Manual, go to step 3.  
3. Press the Up or Down key until the network you want  
highlights and then press the OK soft key or the  
key.  
The phone will scan for that network and you will be  
connected.  
Section 8: Changing Your Settings  
105  
 
Caller ID  
You can prevent your phone number from being  
displayed on the phone of the person being called.  
Note: Some networks do not allow you to change this setting.  
The following options are available:  
Default — the default setting provided by the network is used.  
Hide Number your number does not display on the other  
person’s phone.  
Send Number your number is sent each time you make a  
call.  
Press the Select soft key to apply changes.  
Closed User Group (SIM Dependent)  
This network service allows incoming and outgoing  
calls to be restricted to a selected user group. you can  
create up to 10 user groups.  
For details about how to create and use a closed user  
group, contact your service provider.  
Example: A company lends SIM cards to its employees and wants to  
restrict outgoing calls to members of the same team.  
If you select the Closed User Group menu, you can  
enter the CUG function. You can now access the  
following options:  
Index List — lets you list, add, or delete CUG index numbers.  
If there is no CUG index stored, you are prompted to add a new  
index when you select this option. Once you have added a CUG  
index, the list of current CUG indexes appears.  
106  
Security  
Add a new CUG index as advised by your service provider, or  
delete a group.  
Outside Access — lets you enable or disable calls to numbers  
other than those in the CUG. This feature depends on the  
nature of your CUG subscription. Please check with your  
service provider.  
Default Group you may set a default CUG with your service  
provider. If you have done so, you can enable the Default  
Group option on your phone. When making a call, you are give  
the option of using your default CUG, instead of selecting one  
from the list.  
Security  
The Security feature enables you to restrict the use of  
your phone by the others and to restrict the types of  
calls.  
Various codes and passwords are used to protect the  
features of your phone.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Settings and press the Select soft key or the  
key.  
3. Select Security and press the Select soft key or the  
key.  
The following options are available. Use the Down  
Navigation key to scroll to and set options:  
Section 8: Changing Your Settings  
107  
   
PIN Check  
When the PIN Check feature is enabled, you must enter  
your PIN (Personal Identification Number) each time  
you switch on the phone. Consequently, any person  
who does not have your PIN cannot use your phone  
without your approval.  
Note: Before disabling the PIN Check feature, you must enter your PIN.  
The following options are available:  
Disable — the phone connects directly to the network when  
you switch it on.  
Enable you must enter the PIN each time the phone is  
switched on.  
Change PIN  
This feature allows you to change your current PIN,  
provided that the PIN Check feature is enabled. You  
must enter the current PIN before you can specify a  
new one.  
Once you have entered a new PIN, you are asked to  
confirm it by entering it again.  
Phone Lock  
When the Phone lock feature is enabled, the phone is  
locked and you must enter the 4- to 8-digit phone  
password each time the phone is switched on.  
Note: The password is preset to 00000000” at the factory.  
Once the correct password has been entered, you can  
use the phone until you switch it off.  
108  
       
Security  
The following options are available:  
Disable you are not asked to enter the phone password  
when you switch on the phone.  
Enable you are required to enter the phone password when  
you switch on the phone.  
Change Password  
The Change Password feature allows you to change  
your current phone password to a new one. You must  
enter the current password before you can specify a  
new one.  
Note: The password is preset to 00000000” at the factory. Once you have  
entered a new password, you are asked to confirm it by entering it again.  
Privacy  
Using this menu, you can lock your phone and its’  
contents. Once you have locked the contents, you must  
enter the phones password to access the associated  
menus.  
Note: The password is preset to 00000000” at the factory.  
SIM Lock  
When the SIM Lock feature is enabled, your phone only  
works with the current SIM. You must enter the SIM  
lock code to unlock the SIM so you can use a different  
SIM card.  
Once you have entered the lock code, you are asked to  
confirm your password. Reenter your password and  
press the OK soft key.  
Section 8: Changing Your Settings  
109  
           
FDN Mode  
FDN (Fixed Dial Number) mode, if supported by your  
SIM card, allows you to restrict your outgoing calls to a  
limited set of phone numbers.  
The following options are available:  
Disable — you can call any number.  
Enable you can only call phone numbers stored in Phone  
book. You must enter your PIN2. The following options are  
available:  
Full length entries or wild cards can be entered in to the FDN  
list.  
A full length number with a specific contact name can be  
entered into the FDN list.  
Wildcard entries allow a range of numbers to be dialed with a  
single entry: ex. 555 – All dialed numbers that begin with 555  
will be allowed. Numbers that do not match the conditions in  
the FDN list will be restricted. Note: Entering an asterisk (*) is  
not required for wild card entries.  
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu  
does not display.  
Change PIN2  
The Change PIN2 feature allows you to change your  
current PIN2 to a new one. You must enter the current  
PIN2 before you can specify a new one. Once you have  
entered a new PIN2, you are asked to confirm it by  
entering it again.  
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu  
does not display.  
110  
         
Connection Settings  
Connection Settings  
You can customize the profiles containing the settings  
for connecting your phone to the network. These  
settings are used for the WAP browser or Instant  
Messenger, or sending MMS messages.  
Note: Your phone connects to the network by default. If you change the  
MMS settings without first checking with your service provider, the WAP,  
MMS features may not work properly.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Settings and highlight Connection Settings.  
Press the Select soft key or the  
key.  
3. Select the profile you want to change.  
For each profile, the following options are available:  
Profile Name enter a name that you wish to assign to the  
profile.  
Home URL enter the address of the WAP home page of  
your service provider.  
Proxy place a check in the box to use the proxy server.  
IP Address enter the IP address of the proxy server.  
Port enter a port number or use default setting.  
DNS  
מ
 DNS1 enter the primary DNS (Domain Name System)  
address.  
מ
 DNS2 enter the secondary DNS address.  
Bearer select the network bearer type for data  
transmission, either GPRS or GSM.  
Advance Settings  
Section 8: Changing Your Settings  
111  
     
מ
 APN enter the access point name used for the address  
of the network.  
מ
 Login ID enter the user ID required to connect to the  
network.  
מ
 Password enter the password required to connect to  
the network.  
Reset Settings  
You can easily reset your phone to its default settings.  
To reset your phone:  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Settings and highlight Reset Settings. Press the  
Select soft key or the  
key.  
3. Choose from the following:  
All Settings  
Phone Settings  
Display Settings  
Sound Settings  
4. Press the  
key to make your selection and press the  
Reset soft key.  
5. At the Reset Settings? prompt, Press the Yes soft key to  
reset, or the No soft key to cancel.  
6. Enter the 4- to 8-digit password and press the OK soft  
key or the  
key.  
Note: The password is preset to 00000000.” To change this password,  
112  
     
Section 9: Games  
Topics Covered  
This section details your phones abilities to  
download and play games.  
Section 9: Games  
113  
   
Games Menu  
To access the Games menu, do the following:  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Games and press the Select soft key or the  
key. The following options appear in the display:  
Get Games allows you to seek, purchase, and download  
game applications to your phone using WAP Browser.  
My Games allows you to play and manage games stored  
on your phone.  
3. Press the number key associated with your choice or use  
the navigation keys to highlight the desired option and  
press the Select soft key or the  
key.  
Getting Games  
Get Games lets you download Java-based games and  
store them in your phone.  
Note: Java services may not be available, depending on your service plan  
and phone model.  
To browse the Wireless Web for games, do the  
following:  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Games and press the Select soft key or the  
key.  
3. Using the Up or Down Navigation key, highlight Get  
Games and press the Select soft key or the key.  
114  
     
My Games  
Your Service Provider’s menu appears in the display.  
Note: Contact your Service Provider for details on how to shop for,  
purchase, and download games.  
My Games  
The My Games menu lists the games currently stored  
on your phone. Any games you download using the  
Get Games option are added to the list.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Games and press the Select soft key or the  
key.  
3. Using the Up or Down Navigation key, highlight My  
Games and press the Select soft key or the key. A  
list of available games appears in the display.  
4. Use the navigation keys to highlight the desired game.  
5. Press the Options soft key. The following options appear  
in the display:  
Start Starts the selected game.  
Move to Moves a game into a new folder, If a new folder is  
created under the Games menu.  
Delete Deletes the selected game from your phone. (You  
are prompted to confirm the deletion.)  
Lock/Unlock Protects or releases the selected game from  
deletion.  
Properties Lets you view specifications for the selected  
game [such as, game Size (in KB), Version number, and  
Vendor name].  
Section 9: Games  
115  
   
Permissions Lets you select permission levels for Data  
Network, Data Network2, Comm Connectivity, All App  
Auto Start, and Messaging.  
Upgrade Upgrades the game to an updated version, if  
available.  
Send Information Via SMS When active, uses text  
messaging to retrieve information about a game.  
Memory Status Shows amount of memory currently used  
to store games and shows the amount of memory still available  
to store games.  
6. Use the navigation keys to highlight the desired option  
and press the Select soft key or the  
key.  
7. Press the key repeatedly to return to the Idle screen.  
116  
Section 10: Applications  
Topics Covered  
The topics covered in this section allow you to create  
To-Do lists, set an alarm, and perform simple math  
calculations.  
Section 10: Applications  
117  
   
Alarm  
This feature allows you to:  
Set the alarm to ring at a specific time.  
Set the phone to switch on automatically and ring the alarm  
even if the phone is switched off.  
To set the alarm:  
1. In Idle mode, press the Menu soft key to access the  
menu mode.  
2. Select Applications and press the Select soft key or the  
key.  
3. Highlight Alarm and press the Select soft key or the  
key. The following options display:  
Wake-up Call — the alarm rings to wake you up at the  
specified time.  
Alarm 1 primary alarm setting.  
Alarm 2 secondary alarm setting.  
Auto Power — the alarm rings even when the phone is  
turned off.  
4. Select an alarm type and press the Select soft key or the  
key. Set the following options:  
Alarm use the Left or Right Navigation key to turn alarm  
On or Off.  
Note: Your phone is preset to a 12-hour format. To change the time format,  
Alarm Time use the alphanumeric keypad enter a time for  
the alarm to sound.  
AM/PM use the Left or Right Navigation key to select AM  
or PM.  
118  
   
Alarm  
Repeat use the Left or Right Navigation key to select  
alarm frequency.  
Alarm Tone press the  
key, select Downloads,  
Favorites, or Defaults alarm tones. Press the Select soft  
key or the key to select a tone.  
5. Press the Save soft key to save changes.  
Note: To stop the alarm when it rings, open the phone and press any key.  
Note: Press  
Confirm to turn off the alarm, press Snooze  
to silence  
the phone for 5 minutes.  
Setting Auto Power Alarms  
You can set the phone to ring the alarm when the time  
for an alarm comes, if the phone is switched off.  
1. In Idle mode, press the Menu soft key to access menu  
mode.  
2. Select Applications and press the Select soft key or the  
key.  
3. Highlight Alarm and press the Select soft key or the  
key. Select Auto Power.  
4. Using the Up or Down Navigation key, highlight On and  
press the Select soft key or the  
key to activate the  
Autopower feature.  
If the menu option is set to Off, and the phone is  
switched off at the specified time, the alarm does not  
ring.  
5. When you have finished, press the  
key.  
Section 10: Applications  
119  
Deactivating an Alarm  
1. In Idle mode, press the Menu soft key to access menu  
mode.  
2. Select Applications and press the Select soft key or the  
key. Highlight Alarm and press the Select soft key or  
the  
key.  
3. Select alarm type and press the Select soft key or the  
key.  
4. Alarm is highlighted, use the Left or Right Navigation key  
to turn alarm Off.  
5. Press the Save soft key to save changes.  
6. When you have finished, press the  
key.  
Calculator  
With this feature, you can use the phone as a calculator.  
The calculator provides the basic arithmetic functions;  
addition, subtraction, multiplication, and division.  
1. In Idle mode, press the Menu soft key to access menu  
mode.  
2. Select Applications and press the Select soft key or the  
key.  
3. Highlight Calculator and press the Select soft key or the  
key.  
4. Enter the first number using the numeric keys.  
Note: To include a decimal point or a bracket, press the left soft key until  
the symbol you want displays.  
120  
   
Record Audio  
5. Enter the operation for your calculation by pressing the  
Navigation keys, according to the illustration on the  
display.  
6. Enter the second number.  
7. To view the result, press the  
key.  
Record Audio  
You can record voice memos. After recording, you can  
send the memo to other people via the Multimedia  
Message Service.  
Using Record Audio  
Record Audio allows you to record voice memos. It also  
allows you to send your audio clip to other people as an  
attachment of an MMS message. Recording time is  
limited to free memory space available.  
1. In Idle mode, press the Menu soft key to access menu  
mode.  
2. Select Applications and press the Select soft key or the  
key.  
3. Highlight Record Audio and press the Select soft key or  
the  
4. To start recording, press the  
5. Record a memo by speaking into the microphone.  
6. Press the to stop and restart recording or press the  
Stop soft key to save recording.  
key.  
key.  
If the recording time expires, the message is  
automatically saved.  
Section 10: Applications  
121  
     
7. Press the Options soft key to display the following  
options:  
Play plays back your memo.  
Record starts recording a new voice memo.  
Go to Recorded Audio — launches the Audio list screen to  
select from your voice memos.  
Send via MMS allows you to send your memo to other  
people by using the MMS.  
Set as allows you to set the recorded audio file to be your  
Ringtone or Wake-up Call.  
Delete allows you to delete the memo.  
Rename allows you to change the memo’s name.  
Protection use to protect recorded audio files from being  
deleted.  
Properties displays the Name, Date, Format, Length,  
Size, and Protection of the voice memo.  
8. To exit, press the Back soft key or the  
Audio List  
This menu shows a list of saved voice memos. Scroll to  
key.  
a memo and press the Options soft key or the  
key.  
The following options are available:  
Play plays the memo.  
Send via MMS allows you to send the memo to other people  
by using the MMS feature.  
Set as allows you to set the recording as a Ringtone or a  
Wake-up Call tone.  
Delete allows you to delete selected or all voice memos.  
Rename allows you to change the memo’s name.  
122  
 
Converter  
Move to Favorite Audio allows you to move this voice  
memo to your favorite audio folder.  
Protection — turns on or off protection for your audio files.  
Properties displays information about the memo, such as  
the name, the date when the memo was made, recording  
duration, and memory size.  
Converter  
The conversion menu provides the following  
conversion categories:  
Currency  
Length  
Weight  
Volume  
Area  
Temperature  
Timer  
You can use this menu to set a countdown timer. To  
enable the Timer, use the following options:  
1. Press the Set soft key to enter the length of time.  
2. Enter the time and press the OK soft key.  
3. Press the  
key to start the timer. Press the  
key to  
stop the timer.  
Stopwatch  
You can use this menu to measure intervals of time for 4  
separate times. Press the key to start the stopwatch.  
Press the to stop the stopwatch. Press the Reset soft  
key to erase all times recorded.  
Section 10: Applications  
123  
       
World Time  
World Time allows you to view the time of day or night  
in another parts of the world. World displays time in  
the 24 different time zones around the world.  
1. In Idle mode, press the Menu soft key to access menu  
mode.  
2. Highlight Applications and press the Select soft key or  
the  
3. Highlight World Time and press the Select soft key or  
the key.  
4. Press the  
key.  
key to set the city or area as the new time  
zone. The displayed time will shift to reflect the time  
zone selected.  
5. Use the Left and Right Navigation keys to browse cities  
and times.  
6. To save a selected city as your default time zone, press  
the Option key, highlight Save, and press the Select soft  
key or the  
key.  
7. To set Daylight Saving Time for a time zone, press the  
Option key, highlight Set Daylight Saving Time, and  
press the Select soft key or the  
key.  
8. Use the Up and Down Navigation keys to browse cities.  
9. Press the key to select a city, and press the Save soft  
key to save your selection.  
124  
   
Section 11: Calendar  
Topics Covered  
The topics covered in this section allow you to view  
past, current, and future months in calendar format  
and showing scheduled events (that is, schedules,  
anniversaries, memos, tasks). The Calendar also lets  
you schedule events.  
Section 11: Calendar  
125  
   
Calendar Options  
The Calendar feature allows you to view the current,  
past, or future months in a monthly calendar layout.  
While viewing the calendar, the current date is  
highlighted and days with scheduled events will be  
surrounded with a box.  
1. In Idle mode, press the Menu soft key to access menu  
mode.  
2. Select Calendar and press the Select soft key or the  
key.  
3. Press the Options soft key.  
The following options appear in the display:  
View Mode  
View Mode allows you to select how you want to view  
the calendar.  
1. In Idle mode, press the Menu soft key to access menu  
mode.  
2. Select Calendar and press the Select soft key or the  
key.  
3. Scroll to a date on the calendar by pressing the  
Navigation keys and press the  
key.  
Alternatively press the Options soft key and select Go  
To, press the Select soft key, or the Right Navigation key  
or the  
key and select Date.  
Press the Select soft key or the  
key and manually  
enter a specific date and press the OK soft key.  
The selected date appears in Day View mode.  
4. Press the Back soft key to return to Calendar View.  
126  
   
Create  
5. Press the Options soft key. A pop-up window appears  
containing Calendar options with the View Mode option  
highlighted.  
6. Press the Right Navigation key to display the following  
View Mode options:  
Day View Shows a list of any events scheduled for the  
selected date.  
Week View Shows a selected week and lists the hours  
when events are scheduled.  
7. Use the Up or Down navigation key to highlight the  
desired View Mode and press the Select soft key or the  
key. The selected View Mode appears in the display.  
Press the Back soft key to return to Calendar View.  
Create  
Create allows you to create the following:  
Schedule  
1. In Idle mode, press the Menu soft key to access menu  
mode.  
2. Select Calendar and press the Select soft key or the  
key.  
The calendar displays with today date highlighted.  
3. Scroll to a date on the calendar by pressing the  
Navigation keys and press the  
key.  
Alternatively press the Options soft key and select Go  
To, press the Select soft key, or the Right Navigation  
key or the  
key and select Date.  
Press the Select soft key or the  
key and manually  
enter a specific date and press the OK soft key.  
Section 11: Calendar  
127  
 
4. Press the Options soft key and select Create, press the  
Select soft key, or the Right Navigation key or the  
key and select Schedule.  
5. Press the Select soft key or the  
key an empty  
schedule screen displays.  
6. Enter the following information:  
Subject enter the Subject text and press the Down  
Navigation key.  
Details enter the Details of your message and press the  
Down Navigation key.  
Start Date enter the Start Date using the keypad and  
press the Down Navigation key.  
Start Time enter the Start Time using the keypad and  
press the Down Navigation key.  
AM/PM use the Left or Right Navigation key to select AM  
or PM for the start time of the scheduled event and press the  
Down Navigation key.  
End Date enter the End Date using the keypad and press  
the Down Navigation key.  
End Time enter the End Time using the keypad and press  
the Down Navigation key.  
AM/PM use the Left or Right Navigation key to select AM  
or PM for the end time of the scheduled event and press the  
Down Navigation key.  
Location enter the physical location of the scheduled  
event. Press the  
key to change text entry mode. Press  
the Down Navigation key.  
Alarm press the  
key to set an alarm to ring on the  
chosen day. A check mark displays. Press the Down  
Navigation key.  
128  
Create  
Before enter the number of Minutes, Hours, Days, or  
Weeks that you would like to be notified prior to the scheduled  
event. Press the Down Navigation key. Use the Left or Right  
Navigation key to select how you will be notified. Press the  
Down Navigation key.  
Alarm Tone press the key to select an Alarm Tone to  
ring, to remind you of the scheduled event and press the  
Down Navigation key.  
Repeat press the  
key to set the alarm to automatically  
repeat Every Day, Every Week, or Every Month and press  
the Down Navigation key.  
Until enter the date you would like the Repeat function to  
end.  
7. When you have finished, press the Save soft key.  
Anniversary  
1. In Idle mode, press the Menu soft key to access menu  
mode.  
2. Select Calendar and press the Select soft key or the  
key.  
The calendar displays with today date highlighted.  
3. Scroll to a date on the calendar by pressing the  
Navigation keys and press the  
key.  
Alternatively press the Options soft key and select Go  
To, press the Select soft key, or the Right Navigation  
key or the  
key and select Date.  
Press the Select soft key or the  
key and manually  
enter a specific date and press the OK soft key.  
4. Press the Options soft key and select Create, press the  
Select soft key, or the Right Navigation key or the  
key and select Anniversary.  
Section 11: Calendar  
129  
5. Press the Select soft key or the  
key an empty  
Anniversary screen displays.  
6. Enter the following information:  
Occasion enter the detail of the Occasion and press the  
Down Navigation key.  
Date enter the Date using the keypad and press the Down  
Navigation key.  
Alarm press the  
key to set an alarm to ring on the  
chosen day. A check mark displays and press the Down  
Navigation key.  
Before enter the number of Days or Weeks that you  
would like to be notified prior to the scheduled event. Press the  
Down Navigation key. Use the Left or Right Navigation key to  
select how you will be notified. Press the Down Navigation key.  
Alarm Time set the alarm time for the scheduled event,  
using the keypad and press the Down Navigation key.  
AM/PM use the Left or Right Navigation key to select AM  
or PM for the Alarm Time of the scheduled event and press  
the Down Navigation key.  
Alarm Tone press the key to select an Alarm Tone to  
ring, to remind you of the scheduled event and press the  
Down Navigation key.  
Repeat Every Year press the  
key if you would like the  
occasion to be a recurring event. A check mark displays.  
7. When you have finished, press the Save soft key.  
Memo  
You can make up to 100 memos for the calendar. More  
than one memo can be made for one day.  
1. In Idle mode, press the Menu soft key to access menu  
mode.  
130  
 
Create  
2. Select Calendar and press the Select soft key or the  
key.  
The calendar displays with today date highlighted.  
3. Scroll to a date on the calendar by pressing the  
Navigation keys and press the  
key.  
Alternatively press the Options soft key and select Go  
To, press the Select soft key, or the Right Navigation key  
or the  
key and select Date.  
Press the Select soft key or the  
key and manually  
enter a specific date and press the OK soft key.  
Note: To skip to the previous or next month, press the Volume keys or the  
left side of the phone.  
4. Press the Options soft key and select Create, press the  
Select soft key, or the Right Navigation key or the  
key and select Memo.  
Press the Select soft key or the  
key an empty memo  
screen displays allowing you to enter your memo.  
5. Enter your memo and the press the Save soft key.  
Task  
1. In Idle mode, press the Menu soft key to access menu  
mode.  
2. Select Calendar and press the Select soft key or the  
key.  
The calendar displays with today date highlighted.  
3. Scroll to a date on the calendar by pressing the  
Navigation keys and press the  
key.  
Section 11: Calendar  
131  
Alternatively press the Options soft key and select Go  
To, press the Select soft key, or the Right Navigation key  
or the  
key and select Date.  
Press the Select soft key or the  
key and manually  
enter a specific date and press the OK soft key.  
4. Press the Options soft key and select Create, press the  
Select soft key, or the Right Navigation key or the  
key and select Task.  
5. Press the Select soft key or the  
key an empty Task  
screen displays.  
Task enter details about the event and press the Down  
Navigation key.  
Start Date enter the Start Date of the event using the  
keypad. Press the Down Navigation key.  
Due Date enter the date the task is due to complete.  
Select Priority use the Left or Right Navigation key to set  
a priority level. Choose either High, Normal, or Low.  
6. When you have finished, press the Save soft key.  
Viewing an Event  
1. In Idle mode, press the Menu soft key to access menu  
mode.  
2. Select Calendar and press the Select soft key or the  
key.  
The calendar displays with today date highlighted.  
3. Select the date of the event (s) you want to view and  
press the  
key.  
Alternatively press the Options soft key and select View  
Mode, press the Select soft key, or the Right Navigation  
key or the  
key and select Day View.  
132  
 
Create  
Press the Select soft key or the  
key.  
If there is more than one event for that date, the latest  
event displays.  
The following icons denote events:  
Schedule  
Anniversary  
Memo  
Task  
4. Press the Up or Down Navigation key to scroll to the  
previous or next event.  
If you want to create a new event for that date while  
viewing an event press the Options soft key and select  
Create, press the Select soft key, or the Right  
Navigation key or the  
5. Press the key or press the Options soft key, select  
View and press the Select soft key or the key. The  
event appears in the display.  
key.  
6. Press the Options soft key, to access the event view  
options.  
Edit allows you to edit the entry.  
Create allows you to create a new entry.  
Send via allows you to send the memo to another phone  
via Text Message, Multimedia Message.  
View Mode allows you to select how you want to view the  
calendar memos. Choose the following viewing options,  
Month View, Week View, or Day View.  
Delete allows you to delete the memo.  
Section 11: Calendar  
133  
Memory Status allows you to view the memory status of  
the Schedule, Anniversary, Memo, and Task.  
7. When you have finished, press the  
key.  
Go to  
Allows you to go to today or select a specific date.  
Sort by  
Allows you to sort items by event type. Choose  
Schedule, Anniversary, Memo or Task.  
Delete  
You can delete calendar events one by one, by periods,  
by month or all at one time.  
1. In Idle mode, press the Menu soft key to access menu  
mode.  
2. Select Calendar and press the Select soft key or the  
key.  
3. Press the Options soft key and select Delete, press the  
Select soft key, or the Right Navigation key or the  
key. The following options display.  
Selected delete selected event.  
Periods deletes events in a selected range. Press the  
Select soft key or the key. Enter the From date, press  
the Down Navigation key. Enter the To date and press the  
OK soft key.  
This Month deletes items for specified month.  
All deletes all items in your calendar.  
4. Select option and press the Select soft key or the  
key.  
134  
     
Missed Alarm Events  
5. Press the Yes soft key to confirm deletion.  
6. When you have finished, press the  
key.  
Missed Alarm Events  
This menu option lists alarm events that were missed.  
Memory Status  
This menu option lists the available memory for each  
event category. Use the Up or Down Navigation key to  
select Schedule, Anniversary, Memo, or Task.  
Section 11: Calendar  
135  
   
136  
Section 12: File Manager  
Topics Covered  
This section outlines the various applications that are  
available on your phone.  
Section 12: File Manager  
137  
   
File Manager Menu  
To access the File Manager menu, do the following:  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select File Manager and press the Select soft key or the  
key. The following options appear in the display:  
Audio allows you to play and manage audio files stored on  
your phone.  
Graphics allows you to view and manage graphics stored  
on your phone.  
Video allows you to play and manage videos stored on your  
phone.  
Other Files allows you to play and manage other files  
stored on your phone.  
Memory Status allows you to view the amounts of  
memory used and available to store audio, graphics, and video  
files on your phone.  
3. Press the number key associated with your choice or use  
the navigation keys to highlight the desired option and  
press the Select soft key or the  
key.  
Audio  
In this menu, you can view the list of audio files you  
have recorded, downloaded (ringtones), or received in  
multimedia messages. You can set an audio file as the  
current ringtone. The following options are available:  
138  
   
Audio  
Get Ringtones  
Using the Get Ringtones option on the Audio menu,  
you can access the web site preset by your Wireless  
Provider and download new sounds.  
Downloaded Audio  
Highlight an item in the Downloaded Audio menu  
and press the Options soft key. The following options  
are available:  
Play — plays the selected sound.  
Send via MMS allows you to send the selected sound in a  
multimedia message.  
Set as allows you to set the sound as your Ringtone or as a  
Caller ID tone.  
Delete allows you to delete the sound or delete all sounds.  
Rename allows you to change the name of the sound.  
Move to Favorite Audio allows you to move the sound to  
the Favorite Audio list.  
Protection allows you to lock the sound to protect it from  
deletion.  
Properties displays the sound Name, Date, Format, Size,  
and Protection.  
Record  
The Record option lets you record and save messages  
and sounds for later reuse. After recording a message  
or sound, press the Options soft key. The following  
options are available:  
Play — plays the newly recorded sound.  
Record — returns you to the Record Audio screen.  
Section 12: File Manager  
139  
Go to Recorded Audio — takes you to the Recorded Audio  
list.  
Send via MMS allows you to send the newly recorded  
sound in a multimedia message.  
Set as allows you to set the newly recorded sound as your  
Ringtone or as a Wake-up Call tone.  
Delete allows you to delete the newly recorded sound.  
Rename allows you to change the name of the newly  
recorded sound.  
Protection allows you to lock the newly recorded sound to  
protect it from deletion.  
Properties — displays the newly recorded sound Name, Date,  
Format, Length, Size, and Protection.  
Recorded Audio  
The Recorded Audio list contains your recorded audio  
messages. Highlight an item in the Recorded Audio  
menu and press the Options soft key. The following  
options are available:  
Play — plays the audio message.  
Send via MMS allows you to send the audio message in a  
multimedia message.  
Set as allows you to set the audio message as your  
Ringtone or as a Wake-up Call tone.  
Delete allows you to delete the audio message or delete all  
audio messages.  
Rename allows you to change the name of the audio  
message.  
Move to Favorite Audio allows you to move the audio  
message to the Favorite Audio list.  
Protection allows you to lock the audio message to protect  
it from deletion.  
140  
Audio  
Properties displays the audio message Name, Date,  
Format, Length, Size, and Protection.  
Favorite Audio  
The Favorite Audio list contains your favorite  
downloaded and recorded audio files. Highlight an  
item in the Favorite Audio menu and press the  
Options soft key. The following options are available:  
Play — plays the audio file.  
Send via MMS allows you to send the audio file in a  
multimedia message.  
Set as allows you to set the audio file as your Ringtone or  
Caller ID tone.  
Delete allows you to delete the audio or delete all audio  
files.  
Rename allows you to change the name of the audio file.  
Move to Downloaded/Recorded Audio allows you to move  
the audio message back to the Downloaded Audio or Recorded  
Audio list.  
Protection allows you to lock the audio file to protect it from  
deletion.  
Properties displays the audio file Name, Date, Format,  
Length, Size, and Protection.  
Section 12: File Manager  
141  
Graphics  
In this menu, you can view the list of graphics  
downloaded from the web server or received in  
messages. You can set a downloaded graphic as the  
current background image (wallpaper).  
The following options are available:  
Get Graphics  
Using the Get Graphics option, you can access the web  
site preset by your Wireless Carrier and download new  
graphics.  
Downloaded Graphics  
This menu allows you to access your downloaded  
graphics.  
Scroll to the graphic you want to view. By pressing the  
Options soft key you can access the following options:  
View displays the image.  
Send via MMS allows you to send the graphic in a  
multimedia message.  
Set as allows you to set the graphic as Wallpaper or as a  
Caller ID.  
Delete allows you to delete the graphic.  
Rename allows you to change the name of the graphic.  
Move to Favorite Graphics allows you to move the graphic  
to the Favorite Graphics list.  
Protection allows you to lock the graphic to protect it from  
deletion.  
Properties displays the graphic Name, Date, Format,  
Resolution, Size, and Protection.  
142  
 
Video  
Favorite Graphics  
This menu allows you to access your favorite graphics.  
Highlight an item in the Favorite Graphics menu and  
press the Options soft key. The following options are  
available:  
View — displays the image.  
Send via MMS allows you to send the graphic in a  
multimedia message.  
Set as allows you to set the graphic as Wallpaper or as a  
Caller ID.  
Delete allows you to delete the graphic.  
Rename allows you to change the name of the graphic.  
Move to Downloaded Graphics allows you to move the  
graphic to the Downloaded Graphics list.  
Protection allows you to lock the graphic to protect it from  
deletion.  
Properties displays the graphic Name, Date, Format,  
Resolution, Size, and Protection.  
Video  
In this menu, you can view a list of videos downloaded  
from your wireless provider or received in multimedia  
messages. The following options are available:  
Downloaded Video  
This menu allows you to access your downloaded  
video clips.  
Scroll to the video you want to view. By pressing the  
Options soft key you can access the following options:  
Section 12: File Manager  
143  
 
Play plays the video.  
Send via MMS allows you to send the video in a multimedia  
message.  
Delete allows you to delete the video.  
Rename allows you to change the name of the video.  
Move to Favorite Video allows you to move the video to the  
Favorite Video list.  
Protection allows you to lock the video to protect it from  
deletion.  
Properties displays the video Name, Date, Format, Size, and  
Protection.  
Favorite Video  
In this menu you can review the photos youve taken.  
Highlight a video and press the Options soft key to  
choose from the following options:  
Play plays the video.  
Send via MMS allows you to send the video in a multimedia  
message.  
Delete allows you to delete the video.  
Rename allows you to change the name of the video.  
Move to Downloaded Video allows you to move the video  
to the Downloaded Video list.  
Protection allows you to lock the video to protect it from  
deletion.  
Properties displays the video Name, Date, Format, Size, and  
Protection.  
Other Files  
144  
 
Memory Status  
The Other Files menu lists files that have been sent to  
you. To access this list, use the following steps:  
1. In Idle mode, press the Menu soft key to access menu  
mode.  
2. Select File Manager and press the Select soft key or  
the key. Highlight Other Files and press the Select  
soft key or the key.  
3. Highlight the desired file and press the Select soft key.  
Memory Status  
You can check the amount of memory being used and  
memory remaining for sounds, graphics, and videos.  
Press the Left or Right navigation keys to scroll  
between the memory status of Audio, Graphics, Video,  
and Other files.  
Section 12: File Manager  
145  
 
146  
Section 13: Internet  
Topics Covered  
This section explains how to access the wireless web  
services of your Wireless Carrier.  
Section 13: Internet  
147  
 
Internet Options  
The Internet feature allows you to access wireless web  
services provided by your Wireless Carrier.  
1. In Idle mode, press the Menu soft key to access menu  
mode.  
2. Select Internet and press the Select soft key or the  
key.  
The following options appear in the display:  
Home — takes you back at any time to the home page of the  
Wireless Web service provider.  
Favorites shows the bookmarks list. You can bookmark  
the current page or access previously bookmarked pages.  
Go to URL allows you to manually enter the URL address of  
a wireless web site.  
Browser Profiles allows you to select and edit profiles  
used to access wireless web sites.  
Clear Cache deletes the information stored in the cache.  
The cache stores the most recently accessed web pages.  
Favorites  
While navigating the WAP browser, you can bookmark  
the site to quickly and easily access it at a future time.  
The URL addresses of the bookmarked sites are stored  
in the Favorites folder.  
Accessing a Web Site Using Favorites  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Highlight Internet and press the Select soft key or the  
key.  
148  
   
Favorites  
3. Select Favorites and press the Select soft key or the  
key.  
4. Select a favorite on the Favorite list and press the Select  
soft key or the  
key.  
Storing a Web URL Address  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Highlight Internet and press the Select soft key or the  
key.  
3. Select Favorites and press the Select soft key or the  
key.  
4. Select an <Empty> location, and press the Select soft  
key  
5. Enter the name and address and press the Save soft key  
or the  
6. When you have finished, press the  
Editing a Favorite  
key.  
key.  
1. From the Favorites list, highlight the favorite you want to  
change.  
2. Press the Options soft key and select Edit.  
3. Change the address and the name, as you would when  
storing a new one.  
4. When you have finished, press the Save soft key or the  
key.  
Deleting a Favorite  
1. From the Favorites list, highlight the bookmark you want  
to delete.  
Section 13: Internet  
149  
2. Press the Options soft key and select Delete.  
3. Select Selected.  
4. Press the Yes soft key or the  
key to confirm the  
key.  
deletion.  
5. When you have finished, press the  
Go to URL  
1. In Idle mode, press the Menu soft key to access menu  
mode.  
2. Select Internet and press the Select soft key or the  
key.  
3. Select Go to URL and press the Select soft key or the  
key.  
4. After entering an address, press the Enter soft key or the  
key to go there directly.  
Browser Profiles  
You can set up server profiles for the WAP browser.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Highlight Internet and press the Select soft key or the  
key.  
3. Select Browser Profiles and press the Select soft key or  
the  
key.  
4. Select the profile you want.  
For each profile, the following options are available:  
Profile Name enter a name that you wish to assign to the  
HTTP proxy server.  
150  
   
Browser Profiles  
Home URL set the address of your startup home page.  
When the default home page displays, you can delete it using  
the key and enter your own choice.  
Proxy place a check in the box to use the proxy server.  
IP Address enter the IP address of the proxy server.  
Port enter a port number or use default setting.  
DNS  
מ
 DNS1 enter the primary DNS (Domain Name System)  
address.  
מ
 DNS2 enter the secondary DNS address.  
Bearer select the bearer to be used for each type of  
network address accessed: GPRS or GSM. The remaining  
options depend on the Bearer setting.  
When the bearer is set to GPRS:  
APN enter the access point name used for the address of  
the GPRS network gateway.  
Login ID enter the User ID required to connect to the GPRS  
network.  
Password enter the password required to connect to the  
GPRS network.  
When the bearer is set to GSM:  
Dial Number enter the PPP server phone number  
Login ID enter the PPP server login ID.  
Password enter the PPP server password.  
Data Call Type select a data call type: Analog or ISDN.  
Note: The Browser Profile settings may vary depending on the service  
provider.  
Section 13: Internet  
151  
Clear Cache  
The cache is the phones temporary memory in which  
the most recently accessed web pages are stored. You  
can clear the cache at anytime.  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Highlight Internet and press the Select soft key or the  
key.  
3. Select Clear Cache.  
4. Press the Yes soft key or the  
key to confirm the  
key.  
deletion.  
5. When you have finished, press the  
152  
 
Section 14: Health and Safety  
Information  
Topics Covered  
This section outlines the safety precautions  
associated with using your phone. These safety  
precautions should be followed to safely use your  
phone.  
Section 14: Health and Safety Information  
153  
   
Health and Safety Information  
Exposure to Radio Frequency (RF) Signals  
Certification Information (SAR)  
Your wireless phone is a radio transmitter and receiver.  
It is designed and manufactured not to exceed the  
exposure limits for radio frequency (RF) energy set by  
the Federal Communications Commission (FCC) of the  
U.S. government. These FCC exposure limits are  
derived from the recommendations of two expert  
organizations, the National Counsel on Radiation  
Protection and Measurement (NCRP) and the Institute  
of Electrical and Electronics Engineers (IEEE). In both  
cases, the recommendations were developed by  
scientific and engineering experts drawn from industry,  
government, and academia after extensive reviews of  
the scientific literature related to the biological effects of  
RF energy.  
The exposure limit set by the FCC for wireless mobile  
phones employs a unit of measurement known as the  
Specific Absorption Rate (SAR). The SAR is a measure  
of the rate of absorption of RF energy by the human  
body expressed in units of watts per kilogram (W/ kg).  
The FCC requires wireless phones to comply with a  
safety limit of 1.6 watts per kilogram (1.6 W/ kg). The  
FCC exposure limit incorporates a substantial margin  
of safety to give additional protection to the public and  
to account for any variations in measurements.  
SAR tests are conducted using standard operating  
positions accepted by the FCC with the phone  
transmitting at its highest certified power level in all  
154  
 
Health and Safety Information  
tested frequency bands. Although the SAR is  
determined at the highest certified power level, the  
actual SAR level of the phone while operating can be  
well below the maximum value. This is because the  
phone is designed to operate at multiple power levels  
so as to use only the power required to reach the  
network. In general, the closer you are to a wireless  
base station antenna, the lower the power output.  
Before a new model phone is available for sale to the  
public, it must be tested and certified to the FCC that it  
does not exceed the exposure limit established by the  
FCC. Tests for each model phone are performed in  
positions and locations (e.g. at the ear and worn on the  
body) as required by the FCC. Body-worn operations  
are restricted to Samsung-supplied, approved, or non-  
Samsung designated accessories that have no metal and  
must provide at least 1.5 cm separation between the  
device, including its antenna (whether extended or  
retracted) and the user's body. Non-compliance with  
the above restrictions may result in violation of FCC RF  
exposure guidelines.  
The FCC has granted an Equipment Authorization for  
this mobile phone with all reported SAR levels  
evaluated as in compliance with the FCC RF exposure  
guidelines. The maximum SAR values for this model  
phone as reported to the FCC are:  
GSM 850  
Head: 1.27 W/Kg.  
Body-worn: 1.02 W/Kg.  
PCS 1900  
Head: 0.624 W/Kg.  
Section 14: Health and Safety Information  
155  
Body-worn: 0.312 W/Kg.  
SAR information on this and other model phones can  
be viewed on-line at www.fcc.gov/ oet/ fccid. To find  
information that pertains to a particular model phone,  
this site uses the phone FCC ID number which is  
usually printed somewhere on the case of the phone.  
Sometimes it may be necessary to remove the battery  
pack to find the number. Once you have the FCC ID  
number for a particular phone, follow the instructions  
on the website and it should provide values for typical  
or maximum SAR for a particular phone. Additional  
product specific SAR information can also be obtained  
at www.fcc.gov/ cgb/ sar.  
UL Certified Travel Adaptor  
The Travel Adaptor for this phone has met UL 1310  
safety requirements. Please adhere to the following  
safety instructions per UL guidelines.  
FAILURE TO FOLLOW THE INSTRUCTIONS  
OUTLINED MAY LEAD TO SERIOUS PERSONAL  
INJURY AND POSSIBLE PROPERTY DAMAGE  
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE  
INSTRUCTIONS.  
DANGER - TO REDUCE THE RISK OF FIRE OR  
ELECTRIC SHOCK, CAREFULLY FOLLOW THESE  
INSTRUCTIONS.  
FOR CONNECTION TO A SUPPLY NOT IN THE  
U.S.A., USE AN ATTACHMENT PLUG ADAPTOR OF  
THE PROPER CONFIGURATION FOR THE POWER  
OUTLET.  
156  
 
Consumer Information on Wireless Phones  
Consumer Information on Wireless Phones  
The U.S. Food and Drug Administration (FDA) has  
published a series of Questions and Answers for  
consumers relating to radio frequency (RF) exposure  
from wireless phones. The FDA publication includes  
the following information:  
What kinds of phones are the subject of this update?  
The term wireless phone refers here to hand-held  
wireless phones with built-in antennas, often called  
"cell," "mobile," or "PCS" phones. These types of  
wireless phones can expose the user to measurable  
radio frequency energy (RF) because of the short  
distance between the phone and the user's head. These  
RF exposures are limited by Federal Communications  
Commission safety guidelines that were developed  
with the advice of FDA and other federal health and  
safety agencies. When the phone is located at greater  
distances from the user, the exposure to RF is  
drastically lower because a person's RF exposure  
decreases rapidly with increasing distance from the  
source. The so-called "cordless phones," which have a  
base unit connected to the telephone wiring in a house,  
typically operate at far lower power levels, and thus  
produce RF exposures well within the FCC's  
compliance limits.  
Do wireless phones pose a health hazard?  
The available scientific evidence does not show that  
any health problems are associated with using wireless  
phones. There is no proof, however, that wireless  
phones are absolutely safe. Wireless phones emit low  
Section 14: Health and Safety Information  
157  
 
levels of radio frequency energy (RF) in the microwave  
range while being used. They also emit very low levels  
of RF when in the stand-by mode. Whereas high levels  
of RF can produce health effects (by heating tissue),  
exposure to low level RF that does not produce heating  
effects causes no known adverse health effects. Many  
studies of low level RF exposures have not found any  
biological effects. Some studies have suggested that  
some biological effects may occur, but such findings  
have not been confirmed by additional research. In  
some cases, other researchers have had difficulty in  
reproducing those studies, or in determining the  
reasons for inconsistent results.  
What is FDA's role concerning the safety of wireless  
phones?  
Under the law, FDA does not review the safety of  
radiation-emitting consumer products such as wireless  
phones before they can be sold, as it does with new  
drugs or medical devices. However, the agency has  
authority to take action if wireless phones are shown to  
emit radio frequency energy (RF) at a level that is  
hazardous to the user. In such a case, FDA could  
require the manufacturers of wireless phones to notify  
users of the health hazard and to repair, replace or  
recall the phones so that the hazard no longer exists.  
Although the existing scientific data do not justify FDA  
regulatory actions, FDA has urged the wireless phone  
industry to take a number of steps, including the  
following:  
"Support needed research into possible biological effects of RF  
of the type emitted by wireless phones;  
158  
Consumer Information on Wireless Phones  
"Design wireless phones in a way that minimizes any RF  
exposure to the user that is not necessary for device function;  
and  
"Cooperate in providing users of wireless phones with the best  
possible information on possible effects of wireless phone use  
on human health.  
FDA belongs to an interagency working group of the  
federal agencies that have responsibility for different  
aspects of RF safety to ensure coordinated efforts at the  
federal level. The following agencies belong to this  
working group:  
"National Institute for Occupational Safety and Health  
"Environmental Protection Agency  
"Federal Communications Commission  
"Occupational Safety and Health Administration  
"National Telecommunications and Information Administration  
The National Institutes of Health participates in some  
interagency working group activities, as well.  
FDA shares regulatory responsibilities for wireless  
phones with the Federal Communications Commission  
(FCC). All phones that are sold in the United States  
must comply with FCC safety guidelines that limit RF  
exposure. FCC relies on FDA and other health  
agencies for safety questions about wireless phones.  
FCC also regulates the base stations that the wireless  
phone networks rely upon. While these base stations  
operate at higher power than do the wireless phones  
themselves, the RF exposures that people get from  
these base stations are typically thousands of times  
lower than those they can get from wireless phones.  
Section 14: Health and Safety Information  
159  
Base stations are thus not the primary subject of the  
safety questions discussed in this document.  
What are the results of the research done already?  
The research done thus far has produced conflicting  
results, and many studies have suffered from flaws in  
their research methods. Animal experiments  
investigating the effects of radio frequency energy (RF)  
exposures characteristic of wireless phones have  
yielded conflicting results that often cannot be repeated  
in other laboratories. A few animal studies, however,  
have suggested that low levels of RF could accelerate  
the development of cancer in laboratory animals.  
However, many of the studies that showed increased  
tumor development used animals that had been  
genetically engineered or treated with cancer-causing  
chemicals so as to be pre-disposed to develop cancer in  
absence of RF exposure. Other studies exposed the  
animals to RF for up to 22 hours per day. These  
conditions are not similar to the conditions under  
which people use wireless phones, so we don't know  
with certainty what the results of such studies mean for  
human health.  
Three large epidemiology studies have been published  
since December 2000. Between them, the studies  
investigated any possible association between the use  
of wireless phones and primary brain cancer, glioma,  
meningioma, or acoustic neuroma, tumors of the brain  
or salivary gland, leukemia, or other cancers. None of  
the studies demonstrated the existence of any harmful  
health effects from wireless phones RF exposures.  
However, none of the studies can answer questions  
160  
Consumer Information on Wireless Phones  
about long-term exposures, since the average period of  
phone use in these studies was around three years.  
What research is needed to decide whether RF exposure  
from wireless phones poses a health risk?  
A combination of laboratory studies and  
epidemiological studies of people actually using  
wireless phones would provide some of the data that  
are needed. Lifetime animal exposure studies could be  
completed in a few years. However, very large  
numbers of animals would be needed to provide  
reliable proof of a cancer promoting effect if one exists.  
Epidemiological studies can provide data that is  
directly applicable to human populations, but ten or  
more years' follow-up may be needed to provide  
answers about some health effects, such as cancer. This  
is because the interval between the time of exposure to  
a cancer-causing agent and the time tumors develop - if  
they do - may be many, many years. The interpretation  
of epidemiological studies is hampered by difficulties  
in measuring actual RF exposure during day-to-day  
use of wireless phones. Many factors affect this  
measurement, such as the angle at which the phone is  
held, or which model of phone is used.  
What is FDA doing to find out more about the possible  
health effects of wireless phone RF?  
FDA is working with the U.S. National Toxicology  
Program and with groups of investigators around the  
world to ensure that high priority animal studies are  
conducted to address important questions about the  
effects of exposure to radio frequency energy (RF).  
Section 14: Health and Safety Information  
161  
FDA has been a leading participant in the World Health  
Organization international Electromagnetic Fields  
(EMF) Project since its inception in 1996. An influential  
result of this work has been the development of a  
detailed agenda of research needs that has driven the  
establishment of new research programs around the  
world. The Project has also helped develop a series of  
public information documents on EMF issues.  
FDA and Cellular Telecommunications & Internet  
Association (CTIA) have a formal Cooperative  
Research and Development Agreement (CRADA) to do  
research on wireless phone safety. FDA provides the  
scientific oversight, obtaining input from experts in  
government, industry, and academic organizations.  
CTIA-funded research is conducted through contracts  
to independent investigators. The initial research will  
include both laboratory studies and studies of wireless  
phone users. The CRADA will also include a broad  
assessment of additional research needs in the context  
of the latest research developments around the world.  
What steps can I take to reduce my exposure to radio  
frequency energy from my wireless phone?  
If there is a risk from these products - and at this point  
we do not know that there is - it is probably very small.  
But if you are concerned about avoiding even potential  
risks, you can take a few simple steps to minimize your  
exposure to radio frequency energy (RF). Since time is  
a key factor in how much exposure a person receives,  
reducing the amount of time spent using a wireless  
phone will reduce RF exposure.  
162  
Consumer Information on Wireless Phones  
"If you must conduct extended conversations by wireless phone  
every day, you could place more distance between your body  
and the source of the RF, since the exposure level drops off  
dramatically with distance. For example, you could use a  
headset and carry the wireless phone away from your body or  
use a wireless phone connected to a remote antenna.  
Again, the scientific data do not demonstrate that  
wireless phones are harmful. But if you are concerned  
about the RF exposure from these products, you can  
use measures like those described above to reduce your  
RF exposure from wireless phone use.  
What about children using wireless phones?  
The scientific evidence does not show a danger to users  
of wireless phones, including children and teenagers. If  
you want to take steps to lower exposure to radio  
frequency energy (RF), the measures described above  
would apply to children and teenagers using wireless  
phones. Reducing the time of wireless phone use and  
increasing the distance between the user and the RF  
source will reduce RF exposure.  
Some groups sponsored by other national  
governments have advised that children be  
discouraged from using wireless phones at all. For  
example, the government in the United Kingdom  
distributed leaflets containing such a recommendation  
in December 2000. They noted that no evidence exists  
that using a wireless phone causes brain tumors or  
other ill effects. Their recommendation to limit wireless  
phone use by children was strictly precautionary; it was  
not based on scientific evidence that any health hazard  
exists.  
Section 14: Health and Safety Information  
163  
Dohands-freekitsforwirelessphonesreducerisksfrom  
exposure to RF emissions?  
Since there are no known risks from exposure to RF  
emissions from wireless phones, there is no reason to  
believe that hands-free kits reduce risks. Hands-free  
kits can be used with wireless phones for convenience  
and comfort. These systems reduce the absorption of  
RF energy in the head because the phone, which is the  
source of the RF emissions, will not be placed against  
the head. On the other hand, if the phone is mounted  
against the waist or other part of the body during use,  
then that part of the body will absorb more RF energy.  
Wireless phones marketed in the U.S. are required to  
meet safety requirements regardless of whether they  
are used against the head or against the body. Either  
configuration should result in compliance with the  
safety limit.  
Do wireless phone accessories that claim to shield the  
head from RF radiation work?  
Since there are no known risks from exposure to RF  
emissions from wireless phones, there is no reason to  
believe that accessories that claim to shield the head  
from those emissions reduce risks. Some products that  
claim to shield the user from RF absorption use special  
phone cases, while others involve nothing more than a  
metallic accessory attached to the phone. Studies have  
shown that these products generally do not work as  
advertised. Unlike "hand-free" kits, these so-called  
"shields" may interfere with proper operation of the  
phone. The phone may be forced to boost its power to  
compensate, leading to an increase in RF absorption. In  
164  
Consumer Information on Wireless Phones  
February 2002, the Federal trade Commission (FTC)  
charged two companies that sold devices that claimed  
to protect wireless phone users from radiation with  
making false and unsubstantiated claims. According to  
FTC, these defendants lacked a reasonable basis to  
substantiate their claim.  
What about wireless phone interference with medical  
equipment?  
Radio frequency energy (RF) from wireless phones can  
interact with some electronic devices. For this reason,  
FDA helped develop a detailed test method to measure  
electromagnetic interference (EMI) of implanted cardiac  
pacemakers and defibrillators from wireless  
telephones. This test method is now part of a standard  
sponsored by the Association for the Advancement of  
Medical instrumentation (AAMI). The final draft, a  
joint effort by FDA, medical device manufacturers, and  
many other groups, was completed in late 2000. This  
standard will allow manufacturers to ensure that  
cardiac pacemakers and defibrillators are safe from  
wireless phone EMI. FDA has tested wireless phones  
and helped develop a voluntary standard sponsored  
by the Institute of Electrical and Electronic Engineers  
(IEEE). This standard specifies test methods and  
performance requirements for hearing aids and  
wireless phones so that no interference occurs when a  
person uses a compatible phone and a compatible  
hearing aid at the same time. This standard was  
approved by the IEEE in 2000.  
FDA continues to monitor the use of wireless phones  
for possible interactions with other medical devices.  
Section 14: Health and Safety Information  
165  
Should harmful interference be found to occur, FDA  
will conduct testing to assess the interference and work  
to resolve the problem.  
Additional information on the safety of RF exposures  
from various sources can be obtained from the  
following organizations:  
FCC RF Safety Program:  
http://www.fcc.gov/oet/rfsafety/  
Environmental Protection Agency (EPA):  
http://www.epa.gov/radiation/  
Occupational Safety and Health Administration's (OSHA):  
http://www.osha.slc.gov/SLTC/radiofrequencyradiation/  
index.html  
National institute for Occupational Safety and Health (NIOSH):  
http://www.cdc.gov/niosh/emfpg.html  
World health Organization (WHO):  
http://www.who.int/peh-emf/  
International Commission on Non-Ionizing Radiation Protection:  
http://www.icnirp.de  
Radiation Protection Division of Health Protection Agency (UK):  
http://www.hpa.org.uk/radiation/  
US food and Drug Administration  
http://www.fda.gov/cellphones  
Road Safety  
Your wireless phone gives you the powerful ability to  
communicate by voice, almost anywhere, anytime. But  
an important responsibility accompanies the benefits of  
wireless phones, one that every user must uphold.  
When driving a car, driving is your first responsibility.  
When using your wireless phone behind the wheel of a  
166  
 
Road Safety  
car, practice good common sense and remember the  
following tips:  
1. Get to know your wireless phone and its features, such  
as speed dial and redial. If available, these features help  
you to place your call without taking your attention off  
the road.  
2. When available, use a hands-free device. If possible, add  
an additional layer of convenience and safety to your  
wireless phone with one of the many hands free  
accessories available today.  
3. Position your wireless phone within easy reach. Be able  
to access your wireless phone without removing your  
eyes from the road. If you get an incoming call at an  
inconvenient time, let your voice mail answer it for you.  
4. Let the person you are speaking with know you are  
driving; if necessary, suspend the call in heavy traffic or  
hazardous weather conditions. Rain, sleet, snow, ice  
and even heavy traffic can be hazardous.  
5. Do not take notes or look up phone numbers while  
driving. Jotting down a "to do" list or flipping through  
your address book takes attention away from your  
primary responsibility, driving safely.  
6. Dial sensibly and assess the traffic; if possible, place  
calls when you are not moving or before pulling into  
traffic. Try to plan calls when your car will be stationary.  
If you need to make a call while moving, dial only a few  
numbers, check the road and your mirrors, then  
continue.  
7. Do not engage in stressful or emotional conversations  
that may be distracting. Make people you are talking  
Section 14: Health and Safety Information  
167  
with aware you are driving and suspend conversations  
that have the potential to divert your attention from the  
road.  
8. Use your wireless phone to call for help. Dial 9-1-1 or  
other local emergeny number in the case of fire, traffic  
accident or medical emergencies. Remember, it is a free  
call on your wireless phone!  
9. Use your wireless phone to help others in emergencies. If  
you see an auto accident, crime in progress or other  
serious emergency where lives are in danger, call 9-1-1  
or other local emergency number, as you would want  
others to do for you.  
10. Call roadside assistance or a special non-emergency  
wireless assistance number when necessary. If you see  
a broken-down vehicle posing no serious hazard, a  
broken traffic signal, a minor traffic accident where no  
one appears injured, or a vehicle you know to be stolen,  
call roadside assistance or other special non-emergency  
number.  
"The wireless industry reminds you to use your phone safely  
when driving."  
For more information, please call 1-888-901-SAFE, or  
visit our web-site www.wow-com.com  
Provided by the Cellular Telecommunications &  
Internet Association  
Operating Environment  
Remember to follow any special regulations in force in  
any area and always switch your phone off whenever it  
is forbidden to use it, or when it may cause interference  
168  
 
Operating Environment  
or danger. When connecting the phone or any accessory  
to another device, read its user's guide for detailed  
safety instructions. Do not connect incompatible  
products.  
As with other mobile radio transmitting equipment,  
users are advised that for the satisfactory operation of  
the equipment and for the safety of personnel, it is  
recommended that the equipment should only be used  
in the normal operating position (held to your ear with  
the antenna pointing over your shoulder if you are  
using an external antenna).  
Using Your Phone Near Other Electronic Devices  
Most modern electronic equipment is shielded from  
radio frequency (RF) signals. However, certain  
electronic equipment may not be shielded against the  
RF signals from your wireless phone. Consult the  
manufacturer to discuss alternatives.  
Pacemakers  
Pacemaker manufacturers recommend that a  
minimum distance of 15 cm (6 inches) be maintained  
between a wireless phone and a pacemaker to avoid  
potential interference with the pacemaker.  
These recommendations are consistent with the  
independent research and recommendations of  
Wireless Technology Research.  
Persons with pacemakers:  
should always keep the phone more than 15 cm (6 inches) from  
their pacemaker when the phone is switched on.  
should not carry the phone in a breast pocket.  
Section 14: Health and Safety Information  
169  
should use the ear opposite the pacemaker to minimize  
potential interference.  
If you have any reason to suspect that interference is  
taking place, switch your phone off immediately.  
Other Medical Devices  
If you use any other personal medical devices, consult  
the manufacturer of your device to determine if it is  
adequately shielded from external RF energy. Your  
physician may be able to assist you in obtaining this  
information. Switch your phone off in health care  
facilities when any regulations posted in these areas  
instruct you to do so. Hospitals or health care facilities  
may be using equipment that could be sensitive to  
external RF energy.  
Vehicles  
RF signals may affect improperly installed or  
inadequately shielded electronic systems in motor  
vehicles. Check with the manufacturer or its  
representative regarding your vehicle. You should also  
consult the manufacturer of any equipment that has  
been added to your vehicle.  
Posted Facilities  
Switch your phone off in any facility where posted  
notices requireyou to do so.  
Potentially Explosive Environments  
Switch your phone off when in any area with a  
potentially explosive atmosphere and obey all signs  
and instructions. Sparks in such areas could cause an  
170  
 
Emergency Calls  
explosion or fire resulting in bodily injury or even  
death.  
Users are advised to switch the phone off while at a  
refueling point (service station). Users are reminded of  
the need to observe restrictions on the use of radio  
equipment in fuel depots (fuel storage and distribution  
areas), chemical plants or where blasting operations are  
in progress.  
Areas with a potentially explosive atmosphere are often  
but not always clearly marked. They include below  
deck on boats, chemical transfer or storage facilities,  
vehicles using liquefied petroleum gas (such as  
propane or butane), areas where the air contains  
chemicals or particles, such as grain, dust or metal  
powders, and any other area where you would  
normally be advised to turn off your vehicle engine.  
Emergency Calls  
This phone, like any wireless phone, operates using  
radio signals, wireless and landline networks as well as  
user-programmed functions, which cannot guarantee  
connection in all conditions. Therefore, you should  
never rely solely on any wireless phone for essential  
communications (medical emergencies, for example).  
Remember, to make or receive any calls the phone must  
be switched on and in a service area with adequate  
signal strength. Emergency calls may not be possible on  
all wireless phone networks or when certain network  
services and/ or phone features are in use. Check with  
local service providers.  
Section 14: Health and Safety Information  
171  
 
To make an emergency call:  
1. If the phone is not on, switch it on.  
2. Key in the emergency number for your present location  
(for example, 911 or other official emergency number).  
Emergency numbers vary by location.  
3. Press the  
key.  
If certain features are in use (call barring, for example),  
you may first need to deactivate those features before  
you can make an emergency call. Consult this  
document and your local cellular service provider.  
When making an emergency call, remember to give all  
the necessary information as accurately as possible.  
Remember that your phone may be the only means of  
communication at the scene of an accident; do not cut  
off the call until given permission to do so.  
Restricting Children's access to your Phone  
Your phone is not a toy. Children should not be  
allowed to play with it because they could hurt  
themselves and others, damage the phone or make calls  
that increase your phone bill.  
FCC Notice and Cautions  
FCC Notice  
The phone may cause TV or radio interference if used  
in close proximity to receiving equipment. The FCC can  
require you to stop using the phone if such interference  
cannot be eliminated.  
Vehicles using liquefied petroleum gas (such as  
propane or butane) must comply with the National Fire  
172  
 
Other Important Safety Information  
Protection Standard (NFPA-58). For a copy of this  
standard, contact the National Fire Protection  
Association, One Batterymarch Park, Quincy, MA  
02269, Attn: Publication Sales Division.  
Cautions  
Any changes or modifications to your phone not  
expressly approved in this document could void your  
warranty for this equipment, and void your authority  
to operate this equipment. Only use approved batteries,  
antennas and chargers. The use of any unauthorized  
accessories may be dangerous and void the phone  
warranty if said accessories cause damage or a defect to  
the phone.  
Although your phone is quite sturdy, it is a complex  
piece of equipment and can be broken. Avoid dropping,  
hitting, bending or sitting on it.  
Other Important Safety Information  
Only qualified personnel should service the phone or install the  
phone in a vehicle. Faulty installation or service may be  
dangerous and may invalidate any warranty applicable to the  
device.  
Check regularly that all wireless phone equipment in your  
vehicle is mounted and operating properly.  
Do not store or carry flammable liquids, gases or explosive  
materials in the same compartment as the phone, its parts or  
accessories.  
For vehicles equipped with an air bag, remember that an air bag  
inflates with great force. Do not place objects, including both  
installed or portable wireless equipment in the area over the air  
bag or in the air bag deployment area. If wireless equipment is  
improperly installed and the air bag inflates, serious injury  
could result.  
Section 14: Health and Safety Information  
173  
 
Switch your phone off before boarding an aircraft. The use of  
wireless phone in aircraft is illegal and may be dangerous to  
the aircraft's operation.  
Failure to observe these instructions may lead to the  
suspension or denial of telephone services to the offender, or  
legal action, or both.  
Product Performance  
Getting the Most Out of Your Signal Reception  
The quality of each call you make or receive depends  
on the signal strength in your area. Your phone informs  
you of the current signal strength by displaying a  
number of bars next to the signal strength icon. The  
more bars displayed, the stronger the signal.  
If you're inside a building, being near a window may  
give you better reception.  
Understanding the Power Save Feature  
If your phone is unable to find a signal after 15 minutes  
of searching, a Power Save feature is automatically  
activated. If your phone is active, it periodically  
rechecks service availability or you can check it yourself  
by pressing any key.  
Anytime the Power Save feature is activated, a message  
displays on the screen. When a signal is found, your  
phone returns to standby mode.  
Understanding How Your Phone Operates  
Your phone is basically a radio transmitter and receiver.  
When it's turned on, it receives and transmits radio  
frequency (RF) signals. When you use your phone, the  
system handling your call controls the power level.  
174  
 
Availability of Various Features/Ring Tones  
This power can range from 0.006 watts to 0.2 watts in  
digital mode.  
Maintaining Your Phone's Peak Performance  
For the best care of your phone, only authorized  
personnel should service your phone and accessories.  
Faulty service may void the warranty.  
There are several simple guidelines to operating your  
phone properly and maintaining safe, satisfactory  
service.  
If your phone is equipped with an external antenna, hold the  
phone with the antenna raised, fully-extended and over your  
shoulder.  
Do not hold, bend or twist the phone's antenna.  
Do not use the phone if the antenna is damaged.  
If your phone is equipped with an internal antenna, obstructing  
the internal antenna could inhibit performance.  
Speak directly into the phone's receiver.  
Avoid exposing your phone and accessories to rain or liquid  
spills. If your phone does get wet, immediately turn the power  
off and remove the battery. If it is inoperable, call Customer  
Care for service.  
Availability of Various Features/Ring Tones  
Many services and features are network dependent  
and may require additional subscription and/ or usage  
charges. Not all features are available for purchase or  
use in all areas. Downloadable Ring Tones may be  
available at an additional cost. Other conditions and  
restrictions may apply. See your service provider for  
additional information.  
Section 14: Health and Safety Information  
175  
 
Battery Standby and Talk Time  
Standby and talk times will vary depending on phone  
usage patterns and conditions. Battery power  
consumption depends on factors such as network  
configuration, signal strength, operating temperature,  
features selected, frequency of calls, and voice, data,  
and other application usage patterns.  
Battery Precautions  
Avoid dropping the cell phone. Dropping it, especially on a hard  
surface, can potentially cause damage to the phone and  
battery. If you suspect damage to the phone or battery, take it  
to a service center for inspection.  
Never use any charger or battery that is damaged in any way.  
Use the battery only for its intended purpose.  
If you use the phone near the network's base station, it uses  
less power; talk and standby time are greatly affected by the  
signal strength on the cellular network and the parameters set  
by the network operator.  
Follow battery usage, storage and charging guidelines found in  
the user’s guide.  
Battery charging time depends on the remaining battery charge  
and the type of battery and charger used. The battery can be  
charged and discharged hundreds of times, but it will gradually  
wear out. When the operation time (talk time and standby time)  
is noticeably shorter than normal, it is time to buy a new  
battery.  
If left unused, a fully charged battery will discharge itself over  
time.  
Use only Samsung-approved batteries and recharge your  
battery only with Samsung-approved chargers. When a charger  
is not in use, disconnect it from the power source. Do not leave  
the battery connected to a charger for more than a week, since  
overcharging may shorten its life.  
176  
   
Battery Precautions  
Do not use incompatible cell phone batteries and chargers.  
Some Web sites and second-hand dealers, not associated with  
reputable manufacturers and carriers, might be selling  
incompatible or even counterfeit batteries and chargers.  
Consumers should purchase manufacturer or carrier  
recommended products and accessories. If unsure about  
whether a replacement battery or charger is compatible,  
contact the manufacturer of the battery or charger.  
Extreme temperatures will affect the charging capacity of your  
battery: it may require cooling or warming first.  
Do not leave the battery in hot or cold places, such as in a car in  
summer or winter conditions, as you will reduce the capacity  
and lifetime of the battery. Always try to keep the battery at  
room temperature. A phone with a hot or cold battery may  
temporarily not work, even when the battery is fully charged.  
Li-ion batteries are particularly affected by temperatures below  
0 °C (32 °F).  
Do not place the phone in areas that may get very hot, such as  
on or near a cooking surface, cooking appliance, iron, or  
radiator.  
Do not get your phone or battery wet. Even though they will dry  
and appear to operate normally, the circuitry could slowly  
corrode and pose a safety hazard.  
Do not short-circuit the battery. Accidental short- circuiting can  
occur when a metallic object (coin, clip or pen) causes a direct  
connection between the + and - terminals of the battery (metal  
strips on the battery), for example when you carry a spare  
battery in a pocket or bag. Short-circuiting the terminals may  
damage the battery or the object causing the short-circuiting.  
Do not permit a battery out of the phone to come in contact with  
metal objects, such as coins, keys or jewelry.  
Do not crush, puncture or put a high degree of pressure on the  
battery as this can cause an internal short-circuit, resulting in  
overheating.  
Dispose of used batteries in accordance with local regulations.  
In some areas, the disposal of batteries in household or  
business trash may be prohibited. For safe disposal options for  
Section 14: Health and Safety Information  
177  
Li-Ion batteries, contact your nearest Samsung authorized  
service center. Always recycle. Do not dispose of batteries in a  
fire.  
Care and Maintenance  
Your phone is a product of superior design and  
craftsmanship and should be treated with care. The  
suggestions below will help you fulfill any warranty  
obligations and allow you to enjoy this product for  
many years  
Keep the phone and all its parts and accessories out of the  
reach of small children's.  
Keep the phone dry. Precipitation, humidity and liquids contain  
minerals that will corrode electronic circuits.  
Do not use the phone with a wet hand. Doing so may cause an  
electric shock to you or damage to the phone.  
Do not use or store the phone in dusty, dirty areas, as its  
moving parts may be damaged.  
Do not store the phone in hot areas. High temperatures can  
shorten the life of electronic devices, damage batteries, and  
warp or melt certain plastics.  
Do not store the phone in cold areas. When the phone warms  
up to its normal operating temperature, moisture can form  
inside the phone, which may damage the phone's electronic  
circuit boards.  
Do not drop, knock or shake the phone. Rough handling can  
break internal circuit boards.  
Do not use harsh chemicals, cleaning solvents or strong  
detergents to clean the phone. Wipe it with a soft cloth slightly  
dampened in a mild soap-and-water solution.  
Do not paint the phone. Paint can clog the device's moving  
parts and prevent proper operation.  
178  
 
Care and Maintenance  
Do not put the phone in or on heating devices, such as a  
microwave oven, a stove or a radiator. The phone may explode  
when overheated.  
If your phone has an external antenna, use only the supplied or  
an approved replacement antenna. Unauthorized antennas or  
modified accessories may damage the phone and violate  
regulations governing radio devices.  
If the phone, battery, charger or any accessory is not working  
properly, take it to your nearest qualified service facility. The  
personnel there will assist you, and if necessary, arrange for  
service.  
Section 14: Health and Safety Information  
179  
180  
Section 15: Warranty Information  
Topics Covered  
Section 15: Warranty Information  
181  
 
Standard Limited Warranty  
What is Covered and For How Long? SAMSUNG  
TELECOMMUNICATIONS AMERICA, L.P.  
(“SAMSUNG”) warrants to the original purchaser  
(“Purchaser”) that SAMSUNG's Phones and accessories  
(“Products”) are free from defects in material and  
workmanship under normal use and service for the  
period commencing upon the date of purchase and  
continuing for the following specified period of time  
after that date:  
Phone  
1 Year  
Batteries  
1 Year  
Leather Case/ Pouch  
Holster  
90 Days  
90 Days  
Other Phone Accessories 1 Year  
What is Not Covered? This Limited Warranty is  
conditioned upon proper use of Product by Purchaser.  
This Limited Warranty does not cover: (a) defects or  
damage resulting from accident, misuse, abuse, neglect,  
unusual physical, electrical or electromechanical stress,  
or modification of any part of Product, including  
antenna, or cosmetic damage; (b) equipment that has  
the serial number removed or made illegible; (c) any  
plastic surfaces or other externally exposed parts that  
are scratched or damaged due to normal use; (d)  
malfunctions resulting from the use of Product in  
conjunction with accessories, products, or ancillary/  
peripheral equipment not furnished or approved by  
182  
   
Standard Limited Warranty  
SAMSUNG; (e) defects or damage from improper  
testing, operation, maintenance, installation, or  
adjustment; (f) installation, maintenance, and service of  
Product, or (g) Product used or purchased outside the  
United States or Canada. This Limited Warranty covers  
batteries only if battery capacity falls below 80% of  
rated capacity or the battery leaks, and this Limited  
Warranty does not cover any battery if (i) the battery  
has been charged by a battery charger not specified or  
approved by SAMSUNG for charging the battery, (ii)  
any of the seals on the battery are broken or show  
evidence of tampering, or (iii) the battery has been used  
in equipment other than the SAMSUNG phone for  
which it is specified.  
What are SAMSUNG's Obligations? During the applicable  
warranty period, SAMSUNG will repair or replace, at  
SAMSUNG's sole option, without charge to Purchaser,  
any defective component part of Product. To obtain  
service under this Limited Warranty, Purchaser must  
return Product to an authorized phone service facility  
in an adequate container for shipping, accompanied by  
Purchaser's sales receipt or comparable substitute proof  
of sale showing the date of purchase, the serial number  
of Product and the sellers' name and address. To obtain  
assistance on where to deliver the Product, call  
Samsung Customer Care at 1-888-987-4357. Upon  
receipt, SAMSUNG will promptly repair or replace the  
defective Product. SAMSUNG may, at SAMSUNG's  
sole option, use rebuilt, reconditioned, or new parts or  
components when repairing any Product or replace  
Product with a rebuilt, reconditioned or new Product.  
Repaired/ replaced leather cases, pouches and holsters  
Section 15: Warranty Information  
183  
will be warranted for a period of ninety (90) days. All  
other repaired/ replaced Product will be warranted for  
a period equal to the remainder of the original Limited  
Warranty on the original Product or for 90 days,  
whichever is longer. All replaced parts, components,  
boards and equipment shall become the property of  
SAMSUNG. If SAMSUNG determines that any Product  
is not covered by this Limited Warranty, Purchaser  
must pay all parts, shipping, and labor charges for the  
repair or return of such Product.  
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?  
EXCEPT AS SET FORTH IN THE EXPRESS  
WARRANTY CONTAINED HEREIN, PURCHASER  
TAKES THE PRODUCT “AS IS,” AND SAMSUNG  
MAKES NO WARRANTY OR REPRESENTATION  
AND THERE ARE NO CONDITIONS, EXPRESS OR  
IMPLIED, STATUTORY OR OTHERWISE, OF ANY  
KIND WHATSOEVER WITH RESPECT TO THE  
PRODUCT, INCLUDING BUT NOT LIMITED TO:  
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS  
FOR ANY PARTICULAR PURPOSE OR USE;  
WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE  
PRODUCT;  
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS  
CONTAINED THEREIN; OR  
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF  
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING  
THERETO.  
NOTHING CONTAINED IN THE INSTRUCTION  
MANUAL SHALL BE CONSTRUED TO CREATE AN  
EXPRESS WARRANTY OF ANY KIND  
184  
Standard Limited Warranty  
WHATSOEVER WITH RESPECT TO THE PRODUCT.  
ALL IMPLIED WARRANTIES AND CONDITIONS  
THAT MAY ARISE BY OPERATION OF LAW,  
INCLUDING IF APPLICABLE THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE, ARE  
HEREBY LIMITED TO THE SAME DURATION OF  
TIME AS THE EXPRESS WRITTEN WARRANTY  
STATED HEREIN. SOME STATES/ PROVINCES DO  
NOT ALLOW LIMITATIONS ON HOW LONG AN  
IMPLIED WARRANTY LASTS, SO THE ABOVE  
LIMITATION MAY NOT APPLY TO YOU. IN  
ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR  
ANY DAMAGES OF ANY KIND RESULTING FROM  
THE PURCHASE, USE, OR MISUSE OF, OR  
INABILITY TO USE THE PRODUCT OR ARISING  
DIRECTLY OR INDIRECTLY FROM THE USE OR  
LOSS OF USE OF THE PRODUCT OR FROM THE  
BREACH OF THE EXPRESS WARRANTY,  
INCLUDING INCIDENTAL, SPECIAL,  
CONSEQUENTIAL OR SIMILAR DAMAGES, OR  
LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR  
FOR DAMAGES ARISING FROM ANY TORT  
(INCLUDING NEGLIGENCE OR GROSS  
NEGLIGENCE) OR FAULT COMMITTED BY  
SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR  
ANY BREACH OF CONTRACT OR FOR ANY CLAIM  
BROUGHT AGAINST PURCHASER BY ANY OTHER  
PARTY. SOME STATES/ PROVINCES DO NOT  
ALLOW THE EXCLUSION OR LIMITATION OF  
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO  
THE ABOVE LIMITATION OR EXCLUSION MAY  
Section 15: Warranty Information  
185  
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU  
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO  
HAVE OTHER RIGHTS, WHICH VARY FROM STATE  
TO STATE/ PROVINCE TO PROVINCE. THIS  
LIMITED WARRANTY SHALL NOT EXTEND TO  
ANYONE OTHER THAN THE ORIGINAL  
PURCHASER OF THIS PRODUCT AND STATES  
PURCHASER'S EXCLUSIVE REMEDY. IF ANY  
PORTION OF THIS LIMITED WARRANTY IS HELD  
ILLEGAL OR UNENFORCEABLE BY REASON OF  
ANY LAW, SUCH PARTIAL ILLEGALITY OR  
UNENFORCEABILITY SHALL NOT AFFECT THE  
ENFORCEABILITY FOR THE REMAINDER OF THIS  
LIMITED WARRANTY WHICH PURCHASER  
ACKNOWLEDGES IS AND WILL ALWAYS BE  
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS  
LIMITED AS THE LAW PERMITS. THE PARTIES  
UNDERSTAND THAT THE PURCHASER MAY USE  
THIRD-PARTY SOFTWARE OR EQUIPMENT IN  
CONJUNCTION WITH THE PRODUCT. SAMSUNG  
MAKES NO WARRANTIES OR REPRESENTATIONS  
AND THERE ARE NO CONDITIONS, EXPRESS OR  
IMPLIED, STATUTORY OR OTHERWISE, AS TO THE  
QUALITY, CAPABILITIES, OPERATIONS,  
PERFORMANCE OR SUITABILITY OF ANY  
THIRDPARTY SOFTWARE OR EQUIPMENT,  
WHETHER SUCH THIRD-PARTY SOFTWARE OR  
EQUIPMENT IS INCLUDED WITH THE PRODUCT  
DISTRIBUTED BY SAMSUNG OR OTHERWISE,  
INCLUDING THE ABILITY TO INTEGRATE ANY  
SUCH SOFTWARE OR EQUIPMENT WITH THE  
PRODUCT. THE QUALITY, CAPABILITIES,  
186  
Standard Limited Warranty  
OPERATIONS, PERFORMANCE AND SUITABILITY  
OF ANY SUCH THIRD-PARTY SOFTWARE OR  
EQUIPMENT LIE SOLELY WITH THE PURCHASER  
AND THE DIRECT VENDOR, OWNER OR SUPPLIER  
OF SUCH THIRD-PARTY SOFTWARE OR  
EQUIPMENT, AS THE CASE MAY BE.  
This Limited Warranty allocates risk of Product failure  
between Purchaser and SAMSUNG, and SAMSUNG's  
Product pricing reflects this allocation of risk and the  
limitations of liability contained in this Limited  
Warranty. The agents, employees, distributors, and  
dealers of SAMSUNG are not authorized to make  
modifications to this Limited Warranty, or make  
additional warranties binding on SAMSUNG.  
Accordingly, additional statements such as dealer  
advertising or presentation, whether oral or written, do  
not constitute warranties by SAMSUNG and should  
not be relied upon.  
Samsung Telecommunications America, L.P.  
1000 Klein Street  
Plano, Texas 75074  
Phone: 1-800-SAMSUNG  
Phone: 1-888-987-HELP (4357)  
©2006 Samsung Telecommunications America, L.P. All  
rights reserved.  
No reproduction in whole or in part allowed without  
prior written approval. Specifications and availability  
subject to change without notice.  
Printed in Korea  
Section 15: Warranty Information  
187  
188  
Putting a Call on Hold 32  
Searching for a  
Number 35  
Index  
A
Accessing a Menu  
Function 38  
Alerts on Call 102  
Alphabet mode 48  
Applications 117  
Audio List 122  
B
Call Time 30  
Call Waiting 35, 104  
Charging battery 8  
Clear key 22  
Command Keys 21  
Connection Settings 111  
Contacts List  
Adding a New Contact 55  
Finding an Entry 54  
Group 59  
Battery  
Charging 8  
Installing 7  
Low Indicator 9  
Removing 6  
Management 64  
My Name Card 63  
Own Phone Number 64  
Searching for a  
Number 35  
C
Calendar 125  
Call Functions  
Adjusting the Call  
Volume 28  
Speed Dial 61  
Store number in  
Phone 55  
Answering a Call 28  
Correcting the  
Number 26  
Store number in SIM  
card 57  
Using 54  
Making a Call 26  
Quiet Mode 32  
Recent Calls 29  
Redialing Last  
Number 27  
Contacts Management  
Checking the Memory  
Status 66  
Copying all to Phone 65  
Default Saving 64  
Deleting All Contacts  
Entries 65  
Call Options  
Call Waiting 35  
During a Call 33  
Muting or Sending Key  
Tones 34  
Converter 123  
189  
 
D
H
Data Call Time 31  
Data Volume 31  
Dialing a Number  
Contacts List 54  
Display  
Health and Safety  
Information 153  
I
Icons, description 18  
International Call 26  
K
Keypad Tone 100  
L
Left soft key 21  
Low battery indicator 9  
M
Icons 18  
Display Settings 97  
E
End key 22  
Ending a Call 26  
Entering Text  
Changing the Text Entry  
Mode 48  
Making a Call  
Contacts List 27  
Memo  
Using Alphabet Mode 51  
Using Numbers 52  
Using Symbols 52  
Using T9 Mode 49  
Writing 130  
Menu Navigation 37  
Menu Outline 40  
Messaging 69  
Types of Messages 70  
F
FDN mode 110  
File Manager 137  
Functions and Options 20  
G
Missed Call  
Deleting 29  
Viewing 29  
Games 113  
Mute 34  
N
Getting 114  
My Games 115  
Navigation key 23  
Network Selection 105  
Network Services 102  
Call Forwarding 103  
Getting Started  
Activating Your Phone 6  
Voice Mail 10  
Greeting Message 94  
Number mode 48  
190  
Settings  
P
Connection 111  
Personal Assistant  
Display 97  
Network Services 102  
Phone 93  
Reset 112  
Security 107  
Alarm 118  
Calculator 120  
Phone  
Icons 18  
Phone Settings 93  
PIN  
Sound Settings 99  
Time & Date 92  
Change 108  
Check 108  
FDN 110  
PIN2 110  
Shortcuts 38  
SIM card  
Installing 6  
Lock 109  
Removing 7  
Store Numbers 57  
Powering on/off  
Phone 10  
R
Record  
Soft Keys 21  
Speakerphone Key 23  
Speed Dial  
Voice Memo 121  
Record Audio 121  
Reset Settings 112  
Right soft key 21  
Setting Up Entries 61  
Storing a number  
Phones Memory 55  
PhoneBook 55, 57  
SIM Card 57  
S
Security  
T
Change Password 109  
FDN mode 110  
Phone Lock 108  
PIN check 108  
PIN2 110  
T9 Mode  
Add Word to T9  
Dictionary 50  
Enter a Word 50  
Privacy 109  
SIM lock 109  
Text Input Mode  
Changing 48  
Send key 22  
Service Dialing  
Numbers 67  
Text Messages 70  
Travel adapter 8  
191  
U
Understanding Your  
Contacts List 53  
Understanding Your Phone  
Features of Your  
Phone 14  
Front View of Your  
Phone 14  
Open View of Your  
Phone 16  
V
Viewing an Event 132  
Voice Mail  
Accessing 11  
Changing Number 11  
W
Warranty Information  
Standard Limited  
Warranty 182  
192  

Uniden DX15686 Series User Manual
Toshiba RS 485 User Manual
Sony Xperia SP XSPC5306BK User Manual
SonicWALL Hard Drive 01 SSC 9310 User Manual
Samsung Spinpiont SP2004C User Manual
Samsung Spinpiont M8 ST1000LM024 User Manual
Samsung GT S5620 User Manual
Samsung GALAXY ACE User Manual
Saeco Coffee Makers Coffee Maker V spresso User Manual
Nokia 9201597R001 User Manual