Samsung FLIGHT SGH A797 User Manual

S G H - A 7 9 7  
P O R T A B L E  
M O B I L E  
S e r i e s  
Q u a d - B A N D  
P H O N E  
User Manual  
Please read this manual before operating your  
phone, and keep it for future reference.  
®
ACCESS and NetFront™ are trademarks or registered trademarks of ACCESS Co., Ltd. in Japan and other countries.  
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered  
trademarks and are wholly owned by the Bluetooth SIG.  
microSD™ and the microSD logo are Trademarks of the SD Card Association.  
®
Openwave is a registered Trademark of Openwave, Inc.  
Your phone is designed to make it easy for you to access a wide variety of content. For your protection, we want you to be aware that  
some applications that you enable may involve the location of your phone being shared. For applications available through AT&T, we offer  
privacy controls that let you decide how an application may use the location of your phone and other phones on your account. However,  
the AT&T privacy tools do not apply to applications available outside of AT&T. Please review the terms and conditions and the associated  
privacy policy for each location-based service to learn how location information will be used and protected. In addition, your AT&T phone  
may be used to access the Internet and to download, and/or purchase goods, applications, and services from AT&T or elsewhere from  
third parties. AT&T provides tools for you to control access to the Internet and certain Internet content. These controls may not be  
available for certain devices which bypass AT&T controls.  
Open Source Software  
Some software components of this product incorporate source code covered under GNU General Public License (GPL), GNU Lesser General  
Public License (LGPL), OpenSSL License, BSD License and other open source licenses. To obtain the source code covered under the open  
source licenses, please visit:  
.
Disclaimer of Warranties; Exclusion of Liability  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE  
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER  
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE  
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE  
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION  
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE  
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF  
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.  
Time & Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Call Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Making a Call from the Address Book . . . . . . . . . . . . . . . . . . . 23  
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Quick Reply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Dialing Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
1
Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79  
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80  
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80  
Other Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81  
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103  
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103  
Section 13: AppCenter ............................................... 106  
Downloading Multimedia Files . . . . . . . . . . . . . . . . . . . . . . . 106  
2
Where . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123  
Section 16: Mobile Web ..............................................124  
Accessing the Mobile Web . . . . . . . . . . . . . . . . . . . . . . . . . . 124  
Homepage - att.net . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124  
Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137  
World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138  
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138  
Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138  
3
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148  
Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149  
Section 20: Warranty Information .............................160  
Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 160  
End User License Agreement for Software . . . . . . . . . . . . . . 163  
Index ............................................................................168  
4
Section 1: Getting Started  
This section explains how to start using your phone by first  
configuring your hardware, activating your service, and then  
setting up your voice mail.  
Installing the SIM Card  
When you subscribe to a cellular network, you are provided with  
a plug-in SIM card loaded with your subscription details, such as  
your PIN, available optional services, and many others features.  
Setting Up Your Phone  
Prior to use it is necessary to install both the battery and SIM into  
their corresponding internal compartments. The microSD card  
slot is also located in this same internal area.  
Important!: The plug-in SIM card information and its contacts can be easily  
damaged by scratching or bending, so be careful when handling,  
inserting, or removing the card. Keep all SIM cards out of reach  
of small children.  
1. Remove the battery cover by placing your thumbnail into  
the slot at the bottom of the phone (1) and lifting up.  
Carefully slide the SIM card into the SIM card socket until the  
card locks into place.  
2. Lift the cover away from the phone (2).  
Make sure that the card’s gold contacts face into the phone and  
that the upper-left angled corner of the card is positioned as shown.  
Getting Started  
5
           
Note: If the card is not inserted correctly, the phone does not detect the SIM  
Note: The Samsung a797 has been tested to support up to a 16GB memory  
card. Re-orient the card back into the slot.  
card.  
Installing the Memory Card  
Installing the Battery  
1. Insert the battery into the opening on the back of the  
phone, making sure the connectors align (1).  
Your phone also supports the use of a memory card (microSD™)  
for data storage of such things as data, music, pictures, and  
video files. This type of memory card is designed for use with this  
mobile phone and other devices.  
2. Gently press down to secure the battery (2).  
Push the microSD card into the slot until it clicks (as shown).  
Make sure the microSD’s gold contact pins face upward and the  
card is securely inserted.  
3. Replace the battery cover onto the back of the phone (1).  
Incorrect  
Correct  
6
       
4. Press down until you hear a light click (2).  
Although you can use the phone while the battery is charging,  
doing so will require additional charging time.  
Note: You must fully charge the battery before using your phone for the first  
time. A discharged battery recharges fully in approximately 4 hours.  
Using the Travel Adapter  
1. With the battery installed, temporarily remove the plastic  
cover (upper left side of phone) and plug in the wall  
charger’s connector into the jack.  
Important!: Verify that the handset battery is installed prior to connection. If  
the battery is not properly installed and the wall charger is  
connected, the handset may power off and on continuously,  
preventing proper operation.  
Note: Make sure the battery is properly installed before switching on the  
phone.  
Charging a Battery  
Your phone is powered by a rechargeable Li-ion battery. The  
Travel Adapter that is used to charge the battery, is included with  
your phone. Use only Samsung-approved batteries and chargers.  
Note: The wall charger’s connector will be attached to the phone at a slight  
angle.  
Note: Long backlight settings, searching for service, vibrate mode, browser  
use, and other variables may reduce the battery’s talk and standby  
times.  
Getting Started  
7
       
Note: Failure to unplug the wall charger before you remove the battery, can  
cause damage to the phone.  
Low Battery Indicator  
When the battery is weak and only a few minutes of talk time  
remain, the battery icon (  
) blinks and the device sounds a  
warning tone at regular intervals. In this condition, your phone  
conserves its remaining battery power, not by turning off the  
backlight, but by entering the dimming mode. For a quick check  
of your battery level, glance at the battery charge indicator  
located in the upper-right corner of your device’s display. Five  
I
n
c
o
rr  
ec  
t
C
o
rr  
ec  
t
bars (  
) indicate a full charge.  
When the battery level becomes too low, the phone automatically  
turns off.  
2. Plug the flat end of the Travel Adapter into the Power/  
Accessory Interface connector and the other end into a  
standard AC wall outlet.  
Switching the Phone On or Off  
1. Press and hold  
or  
until the phone switches on.  
3. When charging is finished, remove the flat end from the  
The phone launches the activation splash screen and then  
proceeds to search for the network. Once the network has  
interface connector jack on the phone.  
touch screen responds best to a light touch from the pad of your  
finger or a non-metallic stylus. Using excessive force or a metallic  
object when pressing on the touch screen may damage the  
tempered glass surface and void the warranty. For more  
Note: The display language is preset to English at the factory. To change the  
language, use the Language menu. For more information, refer to  
“Changing Your Settings” on page 39.  
information, refer to “Standard Limited Warranty” on page 160.  
8
         
2. Press and hold  
Locking the Touch Screen  
1. Press (on the right side of the phone) to lock the  
touch screen.  
2. Press and hold  
, until the phone switches off.  
2. When you hear your voicemail greeting, press the asterisk  
key (*).  
3. Enter your passcode using the onscreen keypad.  
again to unlock the touch screen.  
Setting Up Your Voice Mail  
1. In Idle mode, press and hold  
or  
.
You may be prompted to enter a password.  
2. Follow the tutorial to create a password, record a greeting,  
and record your name.  
Note: These steps may be different depending on your network.  
Accessing Your Voice Mail  
1. In Idle mode, press and hold  
or  
.
2. When connected, follow the voice prompts from the voice  
mail center.  
Accessing Your Voice Mail From Another Phone  
1. Dial your wireless phone number.  
Getting Started  
9
               
Section 2: Understanding Your Phone  
This section outlines some key features of your phone. It also  
displays the screen and the icons that appear when the phone is  
in use.  
Front Open View of Your Phone  
1
Features of Your Phone  
Your phone is lightweight, easy-to-use and offers many useful  
features. The following list outlines a few of the features included  
in your phone.  
2
17  
16  
3
Touch screen provides quick response to a variety of in-phone menus  
and options  
4
5
Multitasking  
15  
14  
User friendly, menu driven access to features and options  
Ready access to the Internet  
Built-in Bluetooth technology  
6
7
13  
Instant Messaging capability  
AT&T GPS Navigation functionality provides real-time navigation  
microSD card compatibility for use in data storage and access  
My Stuff feature provides Applications, Audio, Games, Pictures, Tools,  
Videos, Other Files and Used Space.  
8
12  
9
10 11  
10  
             
1. External speaker: allows you to hear the caller.  
9. Messaging: Press the Messaging key to compose a text or  
multimedia message.  
2. Display: shows the information needed to operate your  
phone, such as the received signal strength, phone battery  
level, time, etc.  
10. Microphone: The Microphone allows the other callers to  
hear you when you are speaking to them.  
3. Message Key: allows you to access the Create Message  
11. Silent mode: Press and hold to place your device in silent  
option.  
mode. In text entry mode, press to add a space.  
4. Contacts key: allows you to access your current Contacts,  
12. Directional keys: allows you to scroll up, down, left, and  
Groups and Favorites lists.  
right while navigating menus and the Mobile Web.  
5. Dial key: allows you to access the Phone Functions menu,  
13. Power/End key: ends a call. Press and hold for three  
seconds to turn the phone on or off. While in a menu,  
pressing this key once cancels the current input and twice  
returns the phone to Idle mode.  
such as Dialer, Contacts, and New Message screen.  
6. Talk/Send key: allows you to power on the phone, make  
or answer a call, access your Call History, Call Manager,  
and Call Block features. Press and hold to redial the last  
phone number.  
14. Back key: allows you to return to the previous menu. This  
key also allows you to return to the previous page within  
the Web browser. In Idle mode, this key displays your  
calendar.  
7. Voicemail key: Allows you to press and hold to  
automatically dial your voicemail.  
15. Menu key: allows you to access your phone’s menu  
functions menu, such as IM, Messaging, Mobile Email,  
Mobile Web, AppCenter, YPmobile, AT&T GPS, Address  
Book, AT&T Music, My Stuff, Mobile Video, and Settings.  
8. Built in QWERTY Keypad: Allows you to enter numbers,  
letters, and characters using a full QWERTY keypad  
interface.  
Understanding Your Phone  
11  
16. Shortcuts key: allows you to set up shortcuts to your  
2. Volume keys: allow you to adjust the ringer volume while in  
standby mode or adjust the voice volume during a call.  
When receiving an incoming call, briefly press down either  
favorite applications, tools, or features.  
17. Favorites key: allows you to access and maintain a  
volume key (  
) to mute the ring tone. Press and  
favorite list of contacts.  
hold either volume key to reject the call and send it directly  
to voicemail. Adjusts text size when reading a message or  
using your browser.  
Side Views of Your Phone  
1
3. Multitask key: (  
) launches the multitask menu. This  
menu provides ready access to some of the most  
commonly used features such as: Call, Messaging, Mobile  
Web, Music Player, and Games. You can also End all  
running features.  
5
2
3
4
4. Camera key: allows you to both access the Picture camera  
menu and take pictures when you are in camera mode. In  
Idle mode, press to launch the camera.  
5. Lock key: (  
) lets you lock or unlock the touch screen.  
If you receive an incoming call while the screen is locked,  
1. Power/Accessory Interface connector: allows you to  
connect a Travel Charger or other optional accessories  
such as a USB/data cable or a hands-free headset for  
convenient, hands-free conversations.  
you can answer it by pressing  
unlocking the screen.  
or Accept without  
12  
     
Rear View of Your Phone  
Display Layout  
Your display screen provides a wealth of information about the  
phone’s status and options.The display has 3 main areas:  
2
Indicators  
1
Main Display  
area  
1. Speaker — Allows you to hear music.  
2. Camera lens: is used to take pictures and shoot videos.  
Function  
categories  
Function Categories  
Function Categories are shortcuts to Dial (for dialing a number),  
Contacts (accessing the Contacts list), Menu (displays the icons  
for application access), Message (takes you to the Create  
Message screen), Favorites (displays your Contact Favorites), and  
Shortcuts (displays shortcuts that you have set up to easily  
access your favorite applications).  
Understanding Your Phone  
13  
       
Icons  
Displays when your phone is communicating with the  
EDGE network.  
This list identifies the symbols you’ll see on your phone’s display  
and Indicator area:  
Displays when your connection to a 3G network is  
active.  
Displays your current signal strength. The greater the  
number of bars, the stronger the signal.  
Displays when the phone is accessing services in a  
3G+(HSDPA)network.Whendataisbeingtransferred,  
this icon animates.  
Indicates that the Airplane Mode is active. You cannot  
send or receive any calls or access online information.  
Displays when your phone is communicating with the  
3G network.  
Displays when you are out of your service area.  
Displays when an internal microSD memory card is  
detected.  
Displays when a call is in progress.  
Displays when the phone is connected to a computer  
via a supported USB cable connection.  
Displays when a Video Share call is in progress.  
Displays within the Indicators area when a new text  
message is received.  
Displays within the lock screen when a call has been  
missed.  
Displays within the Indicators area when a new  
Multimedia message is received.  
Displaysyourbattery’schargelevel.Themorebarsyou  
see, the more power you have remaining.  
Displays within the Indicators area when a new voice  
mail is received.  
Displays when your connection to an EDGE network is  
active.  
14  
 
Displays within the Indicators area when a new WAP  
message is received.  
Displays when a Bluetooth stereo headset has been  
paired with the phone.  
Displays when TTY device has been inserted.  
Displays when you set an alarm to ring at a specified  
page 132.  
DisplayswhenT-Coilisenabled.Formoreinformation,  
DisplayswhenCallforwarding is set toForwardalways.  
For more information, refer to “Call Settings” on  
page 54.  
For more details on configuring your phone’s settings, see  
“Changing Your Settings” on page 39.  
Displays when the Sound profile is set to Normal.  
Using the Multitasking Menu  
Displays when the Sound profile is set to silent or the  
volume has been manually lowered below level 1.  
This key (  
) launches the Multitask menu that can be  
activated from within any active window or page on the phone.  
There is no need to stop what you are doing, if you quickly want  
to jump out and activate another common feature.  
Displays when the Sound profile is set to Driving.  
Displays when the Sound profile is set to Outdoor.  
Displays when Bluetooth is activated.  
The idea is to allow you to temporarily exit from your current  
location to access a group of common functions such as: Call,  
Messaging, Mobile Web, Music Player, Games, and End all. This  
key keeps you from having to completely exit from your current  
task or window, whether that be a text message, a web page, or  
an active call, just to quickly do something else.  
Understanding Your Phone  
15  
     
Here is an example:  
Messaging: allows you to send a text or multimedia message while  
using the handset for other tasks.  
You might be in the middle of typing up an email or text message,  
when you suddenly realize that you need to make a quick call.  
Typically, you would have to exit from your current message,  
navigate to the Idle screen, make your call (page 21), after which  
you would have to go back and re-create your message.  
Mobile Web: allows you to launch the Mobile Web while using the  
handset for other tasks.  
Music Player: allows you to launch the Music Player while using the  
handset for other tasks. If an incoming call is received or you want to  
make a call, the Music Player is muted.  
Using this same situation, all you would have to do is:  
Games: allows you to quickly access Games while using the handset  
for other tasks.  
1. Press  
until the you see the Multitask menu screen.  
2. Touch Call, then enter your number and continue the call.  
End all?: closes all running applications or tasks and returns you to the  
Idle screen.  
3. Once you are done, hang up the call normally and you are  
returned to the previous message screen.  
Multitask Functions  
Pressing the Multitasking key (  
) on the right side of the  
handset, allows you to choose from one of the following  
functions:  
Call: allows you to make a voice call while using the handset for other  
tasks. If Music Player is active, it is muted during the call.  
16  
 
Section 3: Menu Navigation  
This section explains the menu navigation for your phone. The  
a797 is completely navigable by either an onscreen touch or by  
using the QWERTY keypad.  
Idle screen  
Lock key  
Touching an onscreen option activates the feature.  
Long menu list can be easily viewed by either using your fingertip to  
scroll either up or down the onscreen list, pressing the volume keys  
up or down, or using the directional keys on the keypad.  
Menu Navigation  
Menus, sub-menus, and features can be accessed by scrolling  
through the available onscreen menus.  
Locking and Unlocking the Phone  
When the device is locked, press and hold  
a797 and display the Idle screen.  
to unlock the  
The Idle screen provides access to a wealth of phone features,  
including Menu tabs (Dial, Contacts, and Menu), Message,  
Favorites, and Shortcuts.  
Command Keys  
Menu Navigation  
17  
       
Opening an Application  
Touch  
and tap the associated onscreen icon.  
Press  
to exit from the current menu and return to the  
previous screen.  
Press to exit from the current location/function, cancel your  
input and return to the Idle screen.  
Navigating Through Menus  
As you navigate through a menu, options display on the screen  
as scrollable lists. Menu tabs (located at the bottom of most  
screens, provide access to additional screen options).  
To navigate a scrollable list:  
1. From the Idle screen, touch  
.
2. Gently press an onscreen option.  
3. From the available list of options you can either:  
Touch an onscreen entry to activate it.  
Firmly press and slide your finger up or down the screen to scroll  
through lists of menu items.  
Navigate through a long list by pressing either volume key up or  
down.  
Navigate through a long list by pressing the directional keys on the  
keypad.  
18  
Scrolling using the Directional Keys  
Note: Scrolling requires that you press firmly on the screen then drag. When  
scrolling through a list make sure not to touch or press individual  
entries on the list as this will open the list entry.  
When you need to scroll through a menu or scroll while using the  
Browser, not only can you use touch, but you can use the  
directional keys on the QWERTY keyboard.  
Directional Keys  
(Up, Down, Left,  
Right)  
Accessing the Phone’s Main Menu  
Once you display a menu list, tapping an item causes different  
functions, depending on its function. For example, you can open  
another list, add text to a message, send a message, play a song,  
or view a photo.  
Shortcuts  
The Shortcuts option allows you quick access to your favorite  
applications, features, and tools. You can Add, Change, and  
Remove Shortcuts.  
1. Touch  
Settings.  
2. Scroll through the list to then touch/activate the desired  
Accessing the Shortcuts Menu  
1. From the Idle screen, touch Shortcuts  
phone function.  
(
).  
Menu Navigation  
19  
   
2. The menu listing your Shortcuts will display.  
3. Touch the Shortcut that you would like to replace.  
4. Select an application that you would like to be added in its  
Adding Shortcuts  
place and touch  
.
1. From the Idle screen, touch Shortcuts  
(
).  
Removing Shortcuts  
2. Touch Add  
.
1. From the Idle screen, touch Shortcuts  
(
).  
2. Touch Remove  
.
Touch to add shortcut  
Touch to expand menu  
3. Select the applications you want to remove from your  
Shortcut list. A checkmark will appear next to each one. Or,  
touch All to remove all Shortcuts.  
4. Touch Remove  
.
The Shortcut is removed from your Shortcut list.  
3. Select an application and touch  
to add it to your  
shortcuts. Items that contain other applications, will have  
displayed next to them. Select to expand the menu.  
>
>
Changing Shortcuts  
1. From the Idle screen, touch Shortcuts  
(
).  
2. Touch Change  
.
20  
Section 4: Call Functions  
This section describes how to make or answer a call. It also  
includes the features and functionality associated with making or  
answering a call.  
Making an International Call  
1. From the Idle screen, press  
. The + character appears.  
2. Use the keypad to enter the country code, area code, and  
For more information, refer to “Call Settings” on page 54.  
phone number.  
Displaying Your Phone Number  
If you make a mistake, touch  
been deleted.  
until the desired numbers have  
Touch  
Settings  
Phone Information.  
Making a Call  
3. Touch  
or press  
.
1. From the Idle screen, with the phone open, use the keypad  
Manual Pause Dialing  
to enter the number you wish to call.  
– or –  
To manually call a number with pause(s) without storing it in your  
Contacts list:  
From the Idle screen, with the phone closed, touch  
and use the onscreen keypad to enter the number you  
wish to dial.  
1. From the Idle screen, use the keypad to enter the phone  
number.  
2. Press  
to add a two-second pause, and use the keypad  
to enter the additional numbers.  
2. Touch  
or press  
.
Tip: You can create pauses longer than two seconds by entering multiple  
p
Note: When you activate the Auto Redial option in the Voice Call menu, the  
phone will automatically redial up to 10 times when the person does  
not answer the call or is already on the phone. For more information,  
refer to “Call Settings” on page 54.  
pauses.  
3. Touch  
or press  
.
Call Functions  
21  
               
For more information, refer to “Adding Pauses to Contact  
Numbers” on page 67.  
3. Touch  
name if already in your Address Book).  
– or –  
Select the Contact to enter the Details page, then touch  
next to the desired phone number (or entry  
Correcting an Entered Number  
Use the following steps to correct a mis-typed entry when  
dialing.  
Call or press  
to dial the number.  
1. After entering a number using the keypad.  
If you make a mistake, press  
Press and hold to erase the entire string of numbers.  
to return to the Idle screen.  
to erase a single character.  
Note: Press and hold  
to redial the last number.  
2. Press  
To scroll between  
Calls Made, Calls  
Received, and  
Missed Calls  
Ending a Call  
Press  
key.  
Dialing a Recent Number  
To call the  
selected number  
All incoming, outgoing and missed calls are recorded in the Calls  
menu. If the number or caller is listed in your Address Book, the  
associated name also displayed.  
1. From the Idle Screen, briefly press  
.
2. Find the number by touching the drop down arrow to the  
right to view the call logs from the various options screens.  
Choose from: All, Missed, Made, or Received.  
To save the  
number to the  
Address Book  
22  
     
Making a Call Using Speed Dial  
Answering a Call  
You can assign a shortcut number to a phone number for speed  
dialing.  
When a call is received the phone rings and displays the caller’s  
phone number, or name if stored in the Address Book.  
1. Touch  
Speed Dial  
Address Book  
Address Book Settings  
1. From the Incoming call screen, press  
or slide Accept  
.
to the right.  
If the Any Key option is activated (Menu  
Settings  
Calls  
2. The Speed Dial screen displays showing the numbers 1  
General  
Call Answer), you can press any key to answer a call  
through 9. The number 1 is reserved for Voice Mail.  
except  
.
3. Touch an unused number and the Contacts screen  
2. End the call by pressing  
.
displays.  
Note: You can answer a call while using the Address Book or other menu  
feature. After ending the call, the phone returns to the previously active  
function screen.  
4. Select a contact to assign to the number. You can also tap  
on the search box and enter the first few letters of the  
name you are searching for.  
Other Answering Options  
5. Follow the on-screen instructions to replace, add, or delete  
When receiving an incoming call:  
an entry.  
Briefly press down either volume key (  
tone.  
) to mute the ring  
Making a Call from the Address Book  
You can store phone numbers that you use regularly on the SIM  
card or in the phone’s memory. These entries are collectively  
called the Address Book.  
the call and send it directly to voicemail.  
Slide Reject + Message to the right to use the Quick Reply feature  
and send the caller a pre-defined text message. For more information,  
refer to “Quick Reply” on page 24.  
For further details about the Address Book feature, see “Finding  
an Address Book Entry” on page 68.  
Call Functions  
23  
           
Quick Reply  
Dialing Options  
You can use the Quick Reply feature to send a text message to  
someone when you are not able to take their call.  
From the Idle screen, you have the option to access the Dialer  
and initiate a call. Before you manually enter numbers from the  
Dialer, you will see three dialing options displayed on the screen.  
To use the Quick Reply feature, follow these steps:  
1. At the incoming call screen, touch and slide Reject +  
Message to the right. The Quick Reply screen will display.  
Call: dials the current number entered using the onscreen keypad.  
Send Message: to create a new text message and address it to either  
a manually entered number or a current entry from your Address Book.  
Contacts: takes you to your Address Book where you can select a  
contact to call.  
2. Touch one of the following pre-defined messages:  
I’ll call you right back.  
I’m in a meeting plz leave me a message.  
What’s up?  
After you begin to enter numbers, the Contacts options changes  
to Save so you can save the Contact if needed.  
Video Share  
Create Message  
3. The message is sent and you are returned to the previous  
The Video Share features allows you to place a call and share live  
or recorded video while on the call. You can initiate or receive  
video by using the following steps.  
menu.  
Note: In order to share video, both parties must be subscribed to Video  
Share, both must have phones that support Video Share, and both  
must be in a 3G coverage area.  
Initiating and Receiving a Video Share Session  
Touch and  
Slide here  
To initiate and receive a Video Share session:  
1. From the Idle screen, touch  
and use the keypad to  
enter the number you wish to dial.  
24  
           
2. Touch  
or press  
.
7. During a Video Share session, your options are displayed  
as icons on the screen. Touch the corresponding icon to  
activate the feature.  
3. Once the call is answered, if you're both capable of Video  
Sharing, the Video Share icon appears on the screen and  
turns from grey to black (  
).  
4. Touch the Video Share onscreen button to invite the other  
party to see video shot from your phone. “Inviting ###-  
###-####” displays. A message is sent to the recipient  
###-###-#### Wants to Share Video With You.”  
Important!: When establishing a Video Share session, only the sender of the  
video clip can save the file.  
5. The recipient will receive a Video Share pop-up to either  
Accept or Reject the Video Share call. They should touch  
Accept to continue or Reject to reject the invitation.  
Tip: To stop the video share call touch Stop.  
6. If the Auto Record option is On, a Recording Started popup  
8. A pop-up message displays Video Share has stopped. Your  
displays showing the memory available for the video.  
recorded video “VSxxxxxxxx” is saved in the Video folder in  
My Stuff  
.
Note: The Auto Record option (page 59) must be enabled for this popup to be  
Video Share (In-Call)  
displayed.  
You can begin a Video Share call during an existing call by  
touching the Video Share icon, or touching More Video  
Share Live.  
Call Functions  
25  
 
Play a Video Share Recording  
are listed.  
During a call (while not in a Live Video Share session) you can  
2. Touch an entry from the list to view the following options:  
share a recorded video for the recipient.  
• Call: allows you to return the call automatically.  
1. Touch More  
Video Share  
Recorded and then select  
• Video Share: allows you to call the number and share a video.  
from the available files in your Video folder.  
• Send Message: allows you to sent a text or Multimedia message to  
the caller.  
2. To make the connection, the recipient should touch Accept  
• Save: allows you to save the number to your Address Book on  
either the phone or SIM card.  
and the Video begins to play on both phones.  
Recent Calls  
The phone stores the numbers of the calls you’ve dialed,  
received, or missed in the Calls menu. You can access this menu  
by from the Idle screen by doing one of the following:  
• Block Caller: allows you to add the sending number to your Reject  
List, where incoming calls are sent directly to voice mail.  
• Delete: allows you to delete the selected call.  
Viewing Missed Calls  
1. Briefly press  
– Or –  
.
The number of calls you have missed is displayed on the Idle  
screen.  
Touch  
My Stuff  
Tools  
Recent Calls.  
1. Touch the onscreen Missed Calls dialog. The most recently  
missed calls are displayed.  
2. Touch the drop-down list located at the top right of the  
screen to select from All Missed Made, or Received  
,
,
.
If the number or caller is listed in your Address Book, the  
associated name is displayed.  
Viewing All Calls  
1. From the Recent Calls menu, touch the drop-down and  
select the All option. All calls made, received, and missed  
26  
               
1. If more than one missed call, touch the Missed Calls dialog.  
Note: If there is a voicemail sent by the same number, associated icons are  
A list of the most recently missed calls is displayed.  
displayed and can then be selected.  
2. Touch the desired missed call.  
2. Scroll through the list of missed calls.  
3. Touch either Call or press  
.
3. To move to another call type, touch the call drop-down list  
Saving a Missed Call to your Address Book  
1. Touch the Missed Calls dialog. A list of the most recently  
missed calls is displayed.  
(upper right of Calls page) and make your selection.  
Viewing the Details of a Missed Call  
To view the details of a selected missed call, use the following  
steps:  
2. Touch the desired missed call.  
1. Touch the Missed Calls dialog. A list of the most recently  
Note: You may see different choices depending upon the settings for your  
missed calls is displayed.  
“Save New Contacts to” option.  
2. Touch the desired missed call. Information for that caller is  
then displayed within a Missed Calls page. For more  
information regarding the available options, see “Viewing  
All Calls” on page 26.  
3. Touch Save New.  
For further details about the Address Book feature, see “Adding  
a New Contact” on page 64.  
Sending a Message to a Missed Call  
1. Touch the Missed Calls dialog. A list of the most recently  
missed calls is displayed.  
Calling Back a Missed Call  
To call back a missed call number:  
Touch Call on the Missed Calls dialog if there was only a single  
2. Touch the desired missed call.  
missed call.  
– or –  
3. Touch Send Message.  
Call Functions  
27  
       
4. At the Create screen, touch the empty text field and use the  
Note: You can press  
at any time to exit the Missed Call feature.  
keypad to type in a message.  
Call Time  
5. When you are done with your message, touch Send.  
1. Touch  
My Stuff  
Tools  
Recent Calls  
Call  
6. To add additional recipients, touch the recipients field.  
Manager Call Time.  
2. The following times are displayed:  
Insert new recipients by:  
Pressing the Tap to Add field and then entering the number  
manually.  
• Last Call Duration: shows the length of time for the last call.  
Selecting from Recent Contacts to choose your recipient.  
Total Dialed: shows the total length of time for the calls made.  
Select an entry from your Contacts list.  
• Dialed Voice Calls: shows the total length of time for all voice calls  
made.  
Selecting members of a Group  
.
• Dialed Data Calls: shows the total length of time for all data calls  
7. Touch Send to initiate delivery.  
made.  
Deleting a Missed Call  
1. Touch the Missed Calls dialog. A list of the most recently  
missed calls is displayed.  
Total Received: shows the total length of time for the calls  
received.  
• Received Voice Calls: shows the total length of time for all voice  
calls received.  
2. Touch Delete.  
• Received Data Calls: shows the total length of time for all data  
calls received.  
3. Place a check mark adjacent to those entries you wish to  
select for deletion.  
Total CallDuration: shows the total length of time for all calls made  
and received.  
Touching All toggles the placement of a check mark next to every  
entry in the list.  
3. Reset these fields by touching Reset All  
.
4. Touch Delete  
.
28  
     
4. Touch Yes to confirm the reset or No to cancel the  
Total Received: shows the size of the total data packet (measured  
in KB - kilobytes) which have been received by the phone since the  
last time this counter was reset.  
5. Enter the user-defined password and touch OK to reset all  
counters. For more information, refer to “Change Phone  
Password” on page 51.  
3. To set these counters back to zero, touch Reset  
.
Place a checkmark adjacent to those individual fields you would like  
Touch All to place a checkmark adjacent to all fields.  
Press  
or  
to cancel this operation.  
4. Enter the password and touch OK to reset all counters. For  
more information, refer to “Change Phone Password” on  
page 51.  
Data Counter  
Data Counter refers to the amount of data (volume) to and from  
the phone.  
1. Touch  
Manager Data Counter.  
2. The following data items are displayed:  
My Stuff  
Tools  
Recent Calls  
Call  
5. Press  
or  
to cancel this operation.  
Options During a Call  
Your phone provides a number of control functions that you can  
use during a call.  
• Last Sent: shows the size of the last data packet (measured in KB -  
kilobytes) sent by the phone since the last time this counter was  
reset.  
Adjusting the Call Volume  
During a call, to adjust the earpiece volume, use the Volume keys  
on the left side of the phone.  
• Last Received: shows the size of the last data packet (measured in  
KB - kilobytes) received by the phone since the last time this  
counter was reset.  
Press the Up volume key to increase the volume level and  
Total Sent: shows the size of the total data packet (measured in KB  
- kilobytes) which have been sent by the phone since the last time  
this counter was reset.  
press the Down volume key to decrease the volume level.  
In Idle mode, you can also adjust the ringer volume using these  
same keys.  
Call Functions  
29  
         
In-Call Options  
Placing a Call on Hold  
During an active call there are several functions available by  
touching a corresponding onscreen button.  
You can place the current call on hold at any point during a  
conversation. You can also make another call while you have a  
call in progress if your network supports this service.  
Speaker On/Off routes the phone’s audio through either the speaker  
or through the earpiece.  
1. While on a call, touch Hold. This action places the current  
caller on hold (which is displayed onscreen as a  
greyed-out box).  
Slide Speaker to On to route the audio through the speaker. (You can  
adjust the speaker volume using the volume keys.)  
Slide Speaker to Off to use the phone’s earpiece.  
2. You can later reactivate this call by touching Resume.  
Touch Mute during a call to mute the microphone.  
Touch Unmute to unmute the microphone.  
To make a new call while you have a call in progress:  
Hold  
1. Touch  
.
Video Share lets you share video during an active call. For more  
information, refer to “Video Share” on page 24.  
Dial to display the onscreen keypad, where you can choose to Save  
the entered number to your Address Book, Send a new text message,  
or initiate a new call.  
More  
2. Touch  
Address Book to look up a number in the  
Address Book.  
- or -  
Dial  
New Call  
Touch  
enter the new number ➔  
to dial the second number.  
.
Hold to place the current active call on hold.  
More to access additional in-call options such as:  
3. Press  
Address Book to display your current Address Book entries.  
Save to Address Book to store the current phone number into your  
Address Book.  
Once connected, each call is displayed within either an In  
call or On hold tab.  
Send Message to send a new text message.  
Memo to write a memo concerning this call.  
Note: The caller currently on hold appears within the On Hold tab.  
30  
       
Switching Between Calls  
2. Once the call is answered, slide Speaker to On to activate  
the speakerphone.  
When you have an active call and a call on hold, you may switch  
between the two calls, changing the one on hold to active and  
placing the other on hold.  
1. Touch Swap.  
The current call (caller #2) is placed on hold and the previous call  
on hold (caller #1) is then reactivated so that you can continue  
conversing with that person.  
2. Press  
to end the currently active call.  
To end a specific call:  
1. Press the associated tab (In call or On hold).  
2. Touch  
to end the specific call.  
3. Press the  
key to end the remaining call.  
3. Use the Volume keys (located on the left side of your  
phone) to adjust the volume.  
Using the Speakerphone During an Active Call  
While in an active call, it is possible to enable the speakerphone  
feature.  
4. To deactivate the speakerphone, slide Speaker to Off.  
Important!: For more information, see “Responsible Listening” on page 149.  
1. Dial the number and press  
.
Switching off the Microphone (Mute)  
You can temporarily switch your phone’s microphone off, so that  
the other person cannot hear you.  
Call Functions  
31  
       
To answer a call while you have a call in progress:  
1. Press to answer the next incoming call. The first call  
is automatically put on hold.  
Example: You wish to say something to person in the room, but do not want  
the person on the phone to hear you.  
Note: If you are already in Video Share or you have a call on hold, you need to  
2. To switch between the two calls, touch Swap.  
select Mute/Unmute.  
• Swap: Places the current call on hold and then activates the  
previous call.  
To switch the microphone off temporarily during a call:  
To end a call on hold  
1. Touch Mute. The option is then replaced with Unmute.  
1. Touch the On hold tab and touch  
adjacent to the  
2. Touch Unmute to deactivate the Mute function and  
caller you wish to disconnect.  
reactivate the microphone.  
2. Press  
to end the current active call.  
Searching for a Number in Address Book  
3-Way Calling (Multi-Party Calling)  
The 3-Way or Multi-Party feature allows you to answer a series of  
incoming calls and place them on hold. If this service is  
supported by the network, all calls can be joined together. You  
are notified of an incoming call by a call waiting tone.  
2. Touch the Address Book entry.  
For further details about the Address Book feature, see “Finding  
an Address Book Entry” on page 68.  
Call Waiting  
Note: The Join option combines all of the calls you have established with  
your phone (both active and on hold).  
The Call Waiting feature allows you to answer an incoming call  
while you have a call in progress, if this service is supported by  
Swap places the current call on hold and then activates the previous  
call.  
the network, and you have set the Settings Call  
Call Waiting Menu to Activated. You are notified of an  
incoming call by a call waiting tone.  
s
Voice Call  
This feature joins all of the calls you have established with your  
phone (both active and on hold) into a multi-party call.  
32  
     
1. Press  
to answer the first incoming call.  
2. Press  
or Accept to answer the next incoming call. The  
first call is automatically put on hold.  
3. Join the first two callers by pressing touching Join.  
• Join: combines your current set of callers into a single multi-party  
call (both active and on hold).  
4. Press  
to end the call.  
Call Functions  
33  
 
Section 5: Entering Text  
This section outlines how to select the desired text entry mode  
when entering characters using the QWERTY keyboard-style  
keypad.  
The keys are labelled with alphabet on the lower half and  
numbers and symbols on the upper half. Press the key  
corresponding to the character you want to enter. To switch  
between using the upper case characters and lower case  
This section also describes how to use the T9 predictive text  
entry system to reduce the number of key strokes needed to  
enter text.  
characters, press  
Navigation key.  
. You can move the cursor by moving the  
Using the QWERTY Keypad  
Tip: To delete a character, press  
the key.  
Your phone has a QWERTY (  
) keypad  
In addition, you can use the following function keys:  
Press to delete characters.  
to support easy and quick text input. You can enter text as you  
would when using a computer’s keyboard. To access the  
QWERTY keypad, slide your phone open to expose the keypad.  
Press to start a new line.  
Press twice to select CAP LOCK.  
Press once more to remove CAP LOCK.  
Press twice to select Function lock.  
Press once more to remove Function lock.  
34  
       
Short press inserts a space.  
Present Text Input mode  
Double press inserts a period and a space.  
Press and hold in Idle mode to set phone to Silent  
mode.  
Press to display the symbols grid.  
Changing the Text Input Mode  
The available Text Input modes are: T9 Predictive Text  
,
Numeric/  
Symbols (123Sym), and Abc. Refer to the Text Input mode in the  
upper right hand corner to identify which mode you are currently  
in.  
Touch to change Text Input mode  
T9: activates the T9 mode in either abc (all lower case) or  
(where the keys default to lowercase until the Shift key is touched  
[activated]).  
To change the Text Input mode, follow these steps:  
1. Touch the on-screen Text Input mode button.  
Symbol-Numeric: activates the number and symbol keys.  
Emoticons: activates the emoticon keys.  
Abc: activates the default alphabet keys. This function works in  
conjunction with the T9 feature.  
2. Touch one of the available Text Input modes.  
3. Enter the desired text.  
Entering Text  
35  
   
4. Use your finger to scroll up and down the word options box  
Using T9 Predictive Text Mode  
1. Touch the Text Input Mode button at the bottom of the  
screen and touch T9 Predictive Text  
.
5. Continue until you have finished your message.  
2.  
will appear in the upper right corner of the  
For more information on sending messages, see “Creating  
screen.  
and Sending Messages” on page 93.  
3. Press each key only once for each letter. A list of word  
options displays and includes a number indicating the  
words available to chose from.  
Using T9 Predictive Text Mode in an Edit Field  
When you are editing a field, such as a contact name, in T9  
Predictive Text Mode, words are not displayed on the screen as in  
the previous example. Use the Up and Down keys on the QWERTY  
keyboard to display different suggested spellings.  
36  
     
3. Touch the Emoticon symbol or symbols that you would like  
Using Numeric/Symbols Mode  
in your message.  
1. Touch the Text Input Mode button at the bottom of the  
screen and touch Numeric/Symbols  
.
OK  
4. When you are finished, touch  
.
2.  
will appear in the upper right corner of the  
5. You will be returned to your message and the previous Text  
screen.  
Input mode.  
3. Press the keys for the numbers or symbols that you want  
in your message.  
4. When you are finished adding numbers or symbols, touch  
the Text Input Mode button and change back to your  
5. Continue until you have finished your message.  
For more information on sending messages, see “Creating  
and Sending Messages” on page 93.  
Using Emoticon Mode  
1. Touch the Text Input Mode button at the bottom of the  
6. Continue until you have finished your message.  
screen and touch Emoticons  
.
For more information on sending messages, see “Creating  
2.  
will appear in the upper right corner of the  
and Sending Messages” on page 93.  
screen.  
Entering Text  
37  
       
Using Abc Mode  
1. Touch the Text Input Mode button at the bottom of the  
screen and touch Abc Mode  
.
2.  
will appear in the upper right corner of the  
screen.  
3. Touch each key only once for each letter.  
To add a number or a symbol, you can change Text Input  
Mode or you can press  
and then the key that  
4. Continue until you have finished your message.  
For more information on sending messages, see “Creating  
and Sending Messages” on page 93.  
38  
   
Section 6: Changing Your Settings  
This section includes tips on how to use your phone’s features,  
as well as how to change and customize the display settings, call  
handling, security settings, and other settings associated with  
your phone.  
• Driving  
• Outdoor  
Normal Profile  
The phone’s profile defaults to Normal where the incoming Alert  
Type is set to melody.  
Quick Tips  
Quick Tips connects you to the AT&T Quick Tips web page where  
you can find information on the operation of your phone.  
Editing the Normal - Call Profile  
1. Touch  
Settings  
Sound Profile  
Normal.  
Touch  
Settings  
Quick Tips.  
Touch the name field and not the radio button to the right.  
The AT&T Quick Tips web page is displayed.  
2. Touch drop-down menu (upper-right of the screen) and  
Sound Profile  
select Call.  
This menu allows you to specify how you are informed of  
incoming calls and messages as well as other notification sounds  
your phone can make.  
3. Select the Call Alert Type field and select one of the  
following and touch Save  
:
• Melody: the phone rings using the ring melody selected in the Ring  
Selecting a Profile  
tone menu.  
1. Touch  
Settings  
Sound Profile.  
• Vibration then Melody: the phone vibrates and then starts ringing.  
2. Touch the radio button next to the profile name. The  
• Vibration & Melody: the phone vibrates and plays a melody  
simultaneously.  
selected profile activates. Choices include:  
4. Touch the Voice Call Ringtone field, touch to select a  
• Normal  
• Silent  
ringtone and touch Save  
.
Changing Your Settings  
39  
           
5. Drag the Ringtone Volume slider to the volume level you  
5. Touch the Message Alert Repetition pull-down and select  
desire (range is 1-7).  
one of the following options:  
• Once: repeats the message alert once.  
• Periodic: repeats the message alert periodically.  
6. Drag the Alert Tone Volume slider to the volume level you  
desire (range is 1-7).  
6. Touch the Vibration Pattern field, then touch to select  
Vibration 1 - 5 and touch Save  
.
7. Touch Save to return to the Sound Profile menu.  
Editing the Normal - Message Profile  
7. Touch the Vibration Pattern field, then touch to select  
1. Touch  
Settings  
Sound Profile  
Normal.  
Vibration 1 - 3 and touch Save  
.
Touch the name field and not the radio button to the right.  
8. Touch Save to return to the Sound Profile menu.  
2. Touch drop-down menu (upper-right of the screen) and  
Editing the Normal - Phone Profile  
select Message.  
1. Touch  
Settings  
Sound Profile  
Normal.  
3. Touch the Message Alert Type field, select one of the  
Touch the name field and not the radio button to the right.  
following and touch Save  
:
2. Touch drop-down menu (upper-right of the screen) and  
• Melody: the phone rings using the ring melody selected in the  
Message Alert Tone menu.  
select Phone.  
• Vibration: the phone vibrates.  
3. Touch the Keypad Tone pull-down and select one of the  
• Vibration & Melody: the phone vibrates and plays a melody  
simultaneously.  
following tones:  
• Beep  
• Glossy  
• Mute  
• Mute: the phone is silent and does not play a melody or vibrate.  
4. Touch the Message Alert Tone field, touch to select a  
ringtone and touch Save  
.
40  
4. Touch the Power On Type field, select one of the following  
and touch Save  
All sound tones are now changed to Silent.  
:
Editing the Silent - Call Profile  
• Melody: the phone rings using a pre-set ring melody.  
1. Touch  
Settings  
Sound Profile  
Silent.  
• Vibration: the phone vibrates but does not play a melody.  
Touch the name field and not the radio button to the right.  
• Vibration & Melody: the phone vibrates and plays a melody  
simultaneously.  
2. Touch drop-down menu (upper-right of the screen) and  
select Call.  
• Mute: the phone is silent and does not play a melody or vibrate.  
3. Select the Call Alert Type field and select one of the  
5. Touch the Power Off Type field, select one of the following  
following and touch Save  
:
and touch Save  
:
• Vibration: the phone vibrates.  
• Melody: the phone rings using a pre-set ring melody.  
• Mute: the phone is silent and does not play a melody or vibrate.  
4. Touch the Vibration Pattern field, then touch to select  
• Vibration: the phone vibrates but does not ring.  
• Vibration & Melody: the phone vibrates and plays a melody  
simultaneously.  
Vibration 1 - 5 and touch Save  
.
• Mute: the phone is silent and does not play a melody or vibrate.  
6. Drag the Phone Sound Volume slider to the volume level  
you desire (range is 0-7).  
5. Drag the Vibration Intensity slider to the intensity level you  
desire (range is 0-7).  
6. Touch Save to return to the Sound Profile menu.  
7. Touch Save to return to the Sound Profile menu.  
Editing the Silent - Message Profile  
Silent Profile  
Silent mode is convenient when you wish to stop the phone from  
making noise, in a theater for example.  
1. Touch  
Settings  
Sound Profile  
Silent.  
Touch the name field and not the radio button to the right.  
2. Touch drop-down menu (upper-right of the screen) and  
Touch  
Settings  
Sound Profile  
Silent.  
select Message.  
Changing Your Settings  
41  
 
3. Touch the Message Alert Type field, select one of the  
following and touch Save  
2. Touch drop-down menu (upper-right of the screen) and  
:
select Call.  
• Vibration: the phone vibrates.  
3. Select the Call Alert Type field and select one of the  
• Mute: the phone is silent and does not play a melody or vibrate.  
4. Touch the Message Alert Repetition pull-down and select  
one of the following options:  
following and touch Save  
:
• Melody: the phone rings using the ring melody selected in the Ring  
tone menu.  
• Vibration then Melody: the phone vibrates and then starts ringing.  
• Once: repeats the message alert once.  
• Vibration & Melody: the phone vibrates and plays a melody  
• Periodic: repeats the message alert periodically.  
5. Touch the Vibration Pattern field, then touch to select  
simultaneously.  
4. Touch the Voice Call Ringtone field, touch to select a  
Vibration 1 - 3 and touch Save  
.
ringtone and touch Save  
.
6. Drag the Vibration Intensity slider to the intensity level you  
5. Drag the Ringtone Volume slider to the volume level you  
desire (range is 0-7).  
desire (range is 1-7).  
7. Touch Save to return to the Sound Profile menu.  
6. Touch the Vibration Pattern field, then touch to select  
Driving Profile  
Vibration 1 - 5 and touch Save  
.
In this case, the speaker is active and launches the currently  
selected Call alert type when the associated notification is  
activated.  
7. Touch Save to return to the Sound Profile menu.  
Editing the Driving - Message Profile  
1. Touch  
Settings  
Sound Profile  
Driving.  
Editing the Driving - Call Profile  
1. Touch  
Settings  
Sound Profile  
Driving.  
Touch the name field and not the radio button to the right.  
2. Touch drop-down menu (upper-right of the screen) and  
Touch the name field and not the radio button to the right.  
select Message.  
42  
 
3. Touch the Message Alert Type field, select one of the  
following and touch Save  
Touch the name field and not the radio button to the right.  
2. Touch drop-down menu (upper-right of the screen) and  
:
select Phone.  
• Melody: the phone rings using the ring melody selected in the  
Message Alert Tone menu.  
3. Touch the Keypad Tone pull-down and select one of the  
• Vibration: the phone vibrates but does not ring.  
following tones:  
• Vibration & Melody: the phone vibrates and plays a melody  
simultaneously.  
• Beep  
• Glossy  
• Mute: the phone is silent and does not play a melody or vibrate.  
• Mute  
4. Touch the Message Alert Tone field, then touch to select  
4. Touch the Power On Type field, select one of the following  
Message Tone 1 - 4 and touch Save  
.
and touch Save  
:
5. Touch the Message Alert Repetition pull-down and select  
• Melody: the phone rings using a pre-set ring melody.  
one of the following options:  
• Vibration: the phone vibrates but does not play a melody.  
• Once: repeats the message alert once.  
• Periodic: repeats the message alert periodically.  
6. Drag the Alert Tone Volume slider to the volume level you  
desire (range is 1-7).  
• Vibration & Melody: the phone vibrates and plays a melody  
simultaneously.  
• Mute: the phone is silent and does not play a melody or vibrate.  
5. Touch the Power Off Type field, select one of the following  
7. Touch the Vibration Pattern field, then touch to select  
and touch Save  
:
Vibration 1 - 3 and touch Save  
.
• Melody: the phone rings using a pre-set ring melody.  
• Vibration: the phone vibrates but does not ring.  
8. Touch Save to return to the Sound Profile menu.  
• Vibration & Melody: the phone vibrates and plays a melody  
simultaneously.  
Editing the Driving - Phone Profile  
1. Touch  
Settings  
Sound Profile  
Driving.  
Changing Your Settings  
43  
• Mute: the phone is silent and does not play a melody or vibrate.  
6. Drag the Phone Sound Volume slider to the volume level  
you desire (range is 0-7).  
4. Touch the Voice Call Ringtone field, touch to select a  
ringtone and touch Save  
.
5. Drag the Ringtone Volume slider to the volume level you  
7. Touch Save to return to the Sound Profile menu.  
desire (range is 1-7).  
Outdoor Profile  
6. Touch the Vibration Pattern field, then touch to select  
Vibration 1 - 5 and touch Save  
.
In this case, you are outdoors and might not be able to hear the  
phone, or need an increased volume in order to hear the phone.  
For example, you might be jogging and need the phone to vibrate  
and ring loudly.  
7. Touch Save to return to the Sound Profile menu.  
Editing the Outdoor - Message Profile  
1. Touch  
Settings  
Sound Profile  
Outdoor.  
Editing the Outdoor - Call Profile  
Touch the name field and not the radio button to the right.  
1. Touch  
Settings  
Sound Profile  
Outdoor.  
2. Touch drop-down menu (upper-right of the screen) and  
Touch the name field and not the radio button to the right.  
select Message.  
2. Touch drop-down menu (upper-right of the screen) and  
3. Touch the Message Alert Type field, select one of the  
select Call.  
following and touch Save  
:
3. Select the Call Alert Type field and select one of the  
• Melody: the phone rings using the ring melody selected in the  
following and touch Save  
:
Message Alert Tone menu.  
• Melody: the phone rings using the ring melody selected in the Ring  
tone menu.  
• Vibration: the phone vibrates but does not ring.  
• Vibration & Melody: the phone vibrates and plays a melody  
• Vibration then Melody: the phone vibrates and then starts ringing.  
simultaneously.  
• Vibration & Melody: the phone vibrates and plays a melody  
simultaneously.  
• Mute: the phone is silent and does not play a melody or vibrate.  
44  
 
4. Touch the Message Alert Tone field, then touch to select  
Message Tone 1 - 4 and touch Save  
• Mute  
4. Touch the Power On Type field, select one of the following  
.
and touch Save  
:
5. Touch the Message Alert Repetition pull-down and select  
• Melody: the phone rings using a pre-set ring melody.  
one of the following options:  
• Vibration: the phone vibrates but does not play a melody.  
• Once: repeats the message alert once.  
• Periodic: repeats the message alert periodically.  
6. Drag the Alert Tone Volume slider to the volume level you  
desire (range is 1-7).  
• Vibration & Melody: the phone vibrates and plays a melody  
simultaneously.  
• Mute: the phone is silent and does not play a melody or vibrate.  
5. Touch the Power Off Type field, select one of the following  
7. Touch the Vibration Pattern field, then touch to select  
and touch Save  
:
Vibration 1 - 3 and touch Save  
.
• Melody: the phone rings using a pre-set ring melody.  
8. Touch Save to return to the Sound Profile menu.  
• Vibration: the phone vibrates but does not ring.  
• Vibration & Melody: the phone vibrates and plays a melody  
Editing the Outdoor - Phone Profile  
simultaneously.  
1. Touch  
Settings  
Sound Profile  
Outdoor.  
• Mute: the phone is silent and does not play a melody or vibrate.  
6. Drag the Phone Sound Volume slider to the volume level  
you desire (range is 0-7).  
Touch the name field and not the radio button to the right.  
2. Touch drop-down menu (upper-right of the screen) and  
select Phone.  
Touch Save to return to the Sound Profile menu.  
3. Touch the Keypad Tone pull-down and select one of the  
Display and Light Settings  
In this menu, you can change various settings for the display or  
backlight.  
following tones:  
• Beep  
• Glossy  
Changing Your Settings  
45  
   
1. From Idle mode, touch  
Light  
2. Select one of the following options:  
Settings  
Display and  
• Pictures: allows you to choose a photo from your Picture folder,  
that are displayed in a thumbnail view.  
.
Clock  
Allows you to select how your clock is displayed on the top right  
side of your screen.  
Wallpaper  
Clock  
1. From Idle mode, touch  
Light Clock  
2. Touch Digital Clock  
3. Touch Save  
Settings  
Display and  
Font Type  
.
Greeting Message  
Transition Effect  
Brightness  
,
Analog Clock, or Off.  
.
Backlight Time  
Font Type  
Wallpaper  
You can select the text style for the informational text displayed  
on your phone.  
This menu allows you to change the background image displayed  
on the Main screen.  
1. From Idle mode, touch  
Light Font Type  
2. Select Type1 Type2 or Type3 and touch Save  
Settings  
Display and  
1. From Idle mode, touch  
Light Wallpaper.  
Settings  
Display and  
.
,
.
2. Drag an onscreen image to the left or right to view either  
the next or previously available images (located in your  
Picture folder) for the wallpaper selection.  
Greeting Message  
In this menu you enter the text which displays on the main  
screen when the phone powers on.  
3. Touch one of the following options:  
1. From Idle mode, touch  
Light Greeting Message.  
Settings  
Display and  
Set: assigns the current image as the new wallpaper image that  
appears when the Main screen.  
46  
2. Touch and hold  
to erase the current greeting message.  
Note: Modifying this setting will impact your battery life.  
3. Use either the onscreen keypad/keyboard to enter a new  
Backlight Time  
greeting.  
When the time (set in this feature) runs out, the touch screen  
turns off. The phone can also be set to lock when the Backlight  
Time runs out. For more information, refer to “Locking and  
Unlocking the Phone” on page 17.  
OK  
4. Touch  
.
Transition Effect  
Allows you to activate/deactivate the default transition effect  
(wipe) during transitions between menu/options pages.  
1. From Idle mode, touch  
Settings  
Display and  
1. From Idle mode, touch  
Settings  
Display and  
Light Backlight Time.  
Light Transition Effect.  
2. Touch one of the backlight times to set the amount of time  
2. Touch either On (activate) or Off (deactivate).  
the phone’s touchscreen remains lit without activity.  
Save  
3. Touch  
.
Options include: 8 Seconds  
,
15 Seconds, 30 Seconds,  
Brightness  
1 Minute 3 Minutes, or 10 Minutes).  
,
Allows you to adjust the display brightness for the LCD to see  
better within different lighting conditions.  
Save  
3. Touch  
.
1. From Idle mode, touch  
Settings  
Display and  
Note: Modifying this setting will impact your battery life.  
Light Brightness.  
Time & Date  
2. Drag the Level slider to the brightness level you desire  
This menu allows you to change the current time and date  
displayed.  
(range is 1-5).  
Save  
3. Touch  
.
1. From Idle mode, touch  
Settings  
Time and Date  
.
Changing Your Settings  
47  
             
Set  
2. Touch the Time Zone Updating drop-down list and select  
Touch  
to complete the assignment.  
6. Touch the Date Format pull-down list and select the format  
one of the following:  
Automatic: the phone automatically updates the time and date  
in which you want the date to display.  
according to the current time zone using the network service.  
7. Touch the Date field then adjust the Month Day, and Year  
,
Prompt First: you are prompted before a time change is applied.  
Manual Only: you need to manually set the time and date  
according to the current time zone using the Set time menu.  
values by using either the up/down input arrows or by  
quickly sliding your fingertip over the numbers to scroll  
through their available values. (Date field is not displayed  
3. Touch the Time Zone field and assign a new time zone by  
touching a corresponding area of the world map. (Time  
Zone field is not displayed when Time Zone Updating is set  
when Time Zone Updating is set to Automatic  
)
Set  
Touch  
to complete the assignment.  
to Automatic  
)
8. Touch Save to store all the new Time and Date settings.  
OK  
to save the new setting.  
Touch  
Phone Settings  
You can customize various phone settings.  
Major cities in each zone are displayed upon selection.  
Current time zones are based upon Greenwich Mean Time.  
From Idle mode, touch  
Settings  
Phone.  
4. Touch 12 hr (12 hour) or 24 hr (24 hour) from the Time  
Language  
Format field.  
This menu allows you to select a display language for Text  
language and Text Input mode. Choose from Automatic, English,  
Français, and Español.  
5. Touch the Time field then adjust the hour and minutes  
values by using either the up/down input arrows or by  
quickly sliding your fingertip over the numbers to scroll  
through their available values. (Time field is not displayed  
when Time Zone Updating is set to Automatic).  
1. From Idle mode, touch  
Language  
Settings  
Phone  
.
Touch either AM or PM.  
48  
     
2. Touch the Screen Text field, touch one of the following  
Calibration  
Save  
selections and touch  
:
The Calibration feature allows you to re-align the screen’s touch  
accuracy. Use this feature only when the device does not respond  
properly when you touch the screen.  
• Automatic (uses the language set on your SIM card).  
• English  
1. From Idle mode, touch  
Calibration  
Settings  
Phone  
• Français  
.
• Español  
2. Touch the center of each target and repeat this step for all  
3. Touch the Input Language field, touch one of the following  
Save  
four targets displayed.  
selections and touch  
:
• English  
• Français  
• Español  
The new settings are automatically saved.  
Note: When touching the screen in Calibration mode, you must touch the  
center of the cross hair area.  
4. Touch  
to return to Phone settings page.  
QWERTY Slide Setting  
Vibration Feedback  
This setting allows you to choose what will be displayed on the  
main screen when you slide open your phone.  
You can set the level of vibration intensity that occurs when you  
touch the screen.  
1. From Idle mode, touch  
QWERTY Slide Setting  
2. Touch Off Create New Message IM, or Mobile Email. If you  
Settings  
Phone  
1. From Idle mode, touch  
Vibration Feedback  
Settings  
Phone  
.
.
,
,
2. Drag the Vibration Intensity slider to the intensity level you  
choose Off, the Idle screen will display when you slide  
desire (range is 0-4).  
open your phone.  
3. Touch Save  
.
3. Touch Save  
.
Changing Your Settings  
49  
Auto Screen Lock  
To change the phone password, see “Change Phone Password”  
on page 51. Once you enter the correct password, you can use  
the phone until you switch it off.  
The Auto Screen Lock feature locks your phone when the  
Backlight turns off. Press and hold the  
keypad.  
key to unlock the  
Touch On or Off from the Lock Phone field.  
Phone.  
Lock SIM Card  
2. Touch On or Off from the Auto Screen Lock field.  
When the Lock SIM Card feature is enabled, your phone only  
works with the current SIM. You must enter the lock code to  
unlock the SIM so you can use a different SIM card. Once you  
have entered the lock code, you are asked to confirm your  
password.  
For more information on setting the Backlight time settings, see  
“Backlight Time” on page 47.  
Security  
The Security feature enables you to restrict the use of your phone  
by others and to restrict the types of calls.  
Touch On or Off from the Lock SIM Card field.  
Note: This lock code is typically the last four digits of the current phone  
number or can be obtained from an AT&T customer service  
representative.  
Various codes and passwords are used to protect the features of  
your phone.  
From Idle mode, touch  
Settings  
Phone  
Security.  
Check PIN code  
Lock Phone  
When the Check PIN code feature is enabled, you must enter  
your PIN each time you switch on the phone. Consequently, any  
person who does not have your PIN cannot use your phone  
without your approval.  
When the Lock Phone feature is enabled, the phone is locked and  
you must enter the 4 to 8 digit phone password each time the  
phone is switched on.  
Touch On or Off from the Check PIN Code field.  
Note: You will be prompted to create a password the first time this feature is  
enabled.  
Note: You can obtain your PIN from an AT&T customer service representative.  
50  
         
Lock Applications  
Fixed Dialing Mode  
Using this menu, you can lock your applications and media  
contents (apps, messages, images, and sounds) from being  
accidentally accessed, altered or deleted. Once you lock the  
contents, you must enter the phone’s password to access the  
associated menus.  
restricts your outgoing calls to a limited set of phone numbers.  
When this feature is enabled, you can make calls only to phone  
numbers stored in the FDN list on the SIM card. For more  
information, refer to “FDN Mode” on page 70.  
1. Touch On or Off from the Fixed Dialing Mode field.  
Note: The first time you access the password screen, you will be prompted to  
• On: you can only call phone numbers stored in the Fixed Dial  
Contacts. You must enter your PIN2 to continue this configuration.  
You can obtain your PIN2 from AT&T’s customer service  
department.  
create a password.  
1. Touch the Lock Applications field.  
2. Touch the check box next to each application you wish to  
• Off: you can call any number.  
lock, or touch All to select all applications.  
2. Use the onscreen keypad to enter your PIN2 Code and  
Applications include: Messaging, My Stuff, Recent Calls, Address  
Book, Calendar, Memo, IM, and Tasks.  
OK  
touch  
.
Save  
Touch  
to store your new selections.  
Note: The PIN2 code is provided by AT&T. Entering an incorrect PIN2 code  
can cause the phone to lock, at which point, you will have to call AT&T  
customer service for assistance.  
3. Enter a new password (during the first use) using the  
onscreen keypad into the New Password field and touch  
OK  
Change Phone Password  
.
OK  
The Change password feature allows you to change your current  
phone password to a new one. You must enter the current  
password before you can specify a new one.  
4. Enter the new password again and touch  
.
Note: To change this password, see “Change Phone Password” on page 51.  
1. Touch the Change Phone Password field.  
Changing Your Settings  
51  
         
OK  
OK  
2. Enter the current phone password and touch  
.
4. Enter your new PIN code and touch  
5. Confirm your new PIN code and touch  
Change PIN2 code  
.
OK  
.
Note: Initially, the phone will not have a password assigned, and step 2 will  
not be necessary. Once a password is assigned, all steps are  
necessary.  
The Change PIN2 code feature allows you to change your current  
PIN2 to a new one. You must first enter the current PIN2  
(obtained from AT&T) before you can specify a new one. Once  
you have entered a new PIN2, you are asked to confirm it by  
entering it again.  
OK  
3. Enter the new password and touch  
.
OK  
4. Re-enter the same password and touch  
.
Note: If you change your password, be sure to write it down and keep it in a  
safe place. If you forget your password, your phone will require AT&T  
customer service to have it unlocked.  
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu  
does not display.  
Change PIN code  
1. Touch the Change PIN2 Code field.  
This feature allows you to change your current PIN, provided that  
the Check PIN Code feature is enabled. The Check PIN Code field  
must be active before you can access this function (page 50).  
2. Use the onscreen keypad/keyboard to enter your PIN2  
OK  
code and touch  
.
OK  
3. Enter the new PIN2 code and touch  
.
Note: This code is provided by AT&T. Entering an incorrect code can cause  
the phone to lock, at which point, you will have to call AT&T customer  
service for assistance.  
OK  
4. Re-enter (reconfirm) the same code and touch  
.
APN Control  
1. If the Check PIN Code feature has not been enabled, touch  
Allows you to turn control of Access Point Names (APN) On or Off.  
APNs are a method by which you can access advanced  
communication using your handset. This advanced  
On from the Check PIN Code field.  
2. Touch the Change PIN Code field.  
communication can include instant messaging, multimedia  
OK  
3. Enter your current PIN code and touch  
.
52  
messaging, email, and Internet access. Turning On APN Control  
requires the PIN2 code.  
4. After the phone settings have been reset, the Reset Phone  
done confirmation displays.  
1. Touch On or Off from the APN Control field.  
Once your phone has been reset to its default settings for  
those selected options, it will restart itself in order to  
incorporate the new settings.  
2. Use the onscreen keypad/keyboard to enter your PIN2  
OK  
code and touch  
.
Note: When the APN Control is on, you must enter the Carrier’s Access Name  
Note: User Data such as contacts, messages, pictures, videos, and music is  
to the APN Control List for Data Service.  
not deleted.  
3. Press  
to return to the previous Phone settings page.  
Restore Phone  
The Restore Phone option is the same as the Reset Phone option  
described above in that all settings are reset to factory defaults.  
However, with the Restore Phone option, all user data is deleted.  
Note: If your SIM card does not support the APN Control feature, this menu  
will not appear.  
Reset Phone  
Warning!: All User Data such as contacts, messages, pictures, videos, and  
music will be deleted. Ensure that you remove your MicroSD card  
if applicable as it will be erased with the Restore Phone option.  
You can easily reset your phone to its default settings. To reset  
your phone:  
1. From Idle mode, touch  
Phone  
Settings  
Phone  
Reset  
Warning!: When performing the Restore Phone option, do not remove your  
battery until the phone has completed the task and has restarted,  
otherwise your phone may be damaged.  
.
2. At the Continue? prompt, touch Yes to reset, or No to  
cancel.  
Airplane Mode  
3. Enter your phone password, if prompted and touch  
Airplane Mode allows you to use many of your phone’s features,  
such as Games, Voice note, etc., when you are in an airplane or  
OK  
.
Changing Your Settings  
53  
 
in any other area where making or receiving calls or data is  
prohibited. When your phone is in Airplane Mode, it cannot send  
Call Settings  
From Idle mode, touch  
Settings  
Calls.  
or receive any calls or access online information. The (  
appears in place of the signal strength indicator when active.  
1. From Idle mode, touch Settings Phone  
) icon  
Adjusting the General Call Settings  
1. Touch General and select from the following options:  
.
• Show My Number: allows you to select how your caller ID is  
handled when an outgoing call is initiated. This is what others see  
on their Caller ID screen. This value can be made blank if you do not  
wish your number displayed to other users.  
2. Touch On or Off from the Airplane Mode field.  
T-Coil Mode  
T-Coil mode allows you to use a hearing aid with a T-coil setting  
in connection with the handset. You can set this mode to On or  
• Auto Reject: selects which numbers will be automatically sent to  
voicemail based on a user-created list from within the Reject List  
.
Off. When T-Coil Mode is On, the  
icon displays on the Idle  
• Quick Reply: allows you to select from several pre-written  
messages that you can send to callers when you can’t take a call.  
screen.  
T-Coil mode can be set to on or off.  
• Call Answer: selects how your phone answers incoming calls.  
Selections are: Send Key, Open Slide, Any Key, and Automatic  
(Time - 1-5 seconds).  
1. In Idle mode, press Menu Settings Phone T-Coil  
Mode.  
• Call Status Tones: allows you to activate an alert tone for one of  
2. Touch On or Off  
.
two available status categories. Touch an option to make your  
Save  
selection and then touch  
Options include:  
to store your new selection.  
3. Touch Yes when the T-Coil confirmation displays.  
Call Connect Tone: allows you to activate an alert tone when the a  
connection has been made.  
compatibility only when the phone is open, which has maximum  
antenna efficiency. When the option is enabled and the phone is  
open during a call, the T-coil adjusts the audio for use with T-coil  
hearing aids (see “FCC Hearing-Aid Compatibility (HAC)  
Minute Minder: allows you to activate an alert tone which sounds  
every minute the call is active.  
Regulations for Wireless Devices” on page 152.)  
• Alerts on Call: activates an alert tone for new messages being  
received during an active call. Touch  
Save  
to store setting.  
54  
       
Save  
Touch  
to store the new setting.  
2. Press  
twice return to the previous Phone settings  
2. Press  
twice return to the previous Phone settings  
page.  
page.  
Adjusting the Voice Call Settings  
1. Touch Voice Call and select from the following options:  
Connectivity  
The phone has several communication/connection parameters  
which can be edited.  
• Call Forwarding: incoming calls are re-routed to a secondary  
number that you specify. Select the condition for the call forward  
action:  
Bluetooth  
Forward Always activates an automatic forward of all incoming calls  
regardless of condition.  
Bluetooth is a short-range wireless communications technology  
capable of exchanging information over a distance of about 30  
feet without requiring a physical connection. Unlike infrared, you  
don't need to line up the devices to beam information with  
Bluetooth. If the devices are within a range of one another, you  
can exchange information between them, even if they are located  
in different rooms. The following Bluetooth options are available:  
Busy activates an forward function only when your number is currently  
in use and the caller receives a busy signal.  
No Reply activates an automatic forward of all incoming calls after a  
preset amount of time (5 seconds - 30 seconds).  
Unreachable activates an automatic forward of all incoming calls only  
when you can not be reached and your phone status is set to  
unreachable.  
Bluetooth Activation and Deactivation  
Cancel All cancels all call forwarding functions.  
1. From Idle mode, touch  
Bluetooth  
Settings  
Connectivity  
• Call Waiting: this network service informs you when someone is  
trying to reach you during another call. You can specify individual  
call waiting options for voice calls and/or data calls.  
.
2. Touch the onscreen Phone icon  
to activate Bluetooth.  
Touch of the available options: Activate  
,
Deactivate, Check Status  
– or –  
(checks the status of this service on your account).  
Touch  
to deactivate Bluetooth.  
• Auto Redial: the phone automatically redials the last active number  
if the call was either cut off or you were unable to connect.  
Touch either On or Off to activate/deactivate the function.  
Changing Your Settings  
55  
     
Phone’s Visibility  
1. From Idle mode, touch  
Settings  
Connectivity  
Bluetooth  
Visible.  
2. Touch Yes or No to enable or disable the visibility  
(discoverability) of your phone.  
Your phone becomes visible to other devices when you transmit  
your device’s name to others in your area. This allows other devices  
to detect your phone and request a connection. If your phone is not  
visible, you can still detect and connect to other devices, while still  
hiding yourself from others.  
Bluetooth  
Inactive  
Bluetooth  
Active  
Device Name  
1. From Idle mode, touch  
Bluetooth My Info  
Connecting to Other Bluetooth Devices  
Settings  
Settings  
Connectivity  
1. From Idle mode, touch  
Bluetooth Search  
Connectivity  
.
.
2. Touch the Name field, touch and hold  
Detected Bluetooth devices then appear as buttons on the  
Bluetooth page.  
2. Touch the desired device to begin pairing.  
3. Use the keypad to enter the new name for this device and  
3. Touch the Passkey field, enter the passkey used by the  
OK  
touch  
. For more information, refer to “Entering Text”  
OK  
target device and touch  
.
on page 34.  
Save  
OK  
4. Select Connection Options and touch  
.
4. Touch  
.
5. Once the target device accepts the pair your new device  
shows as connected (green) within the Bluetooth page.  
56  
 
Object Push: used to exchange personal data (namecards, Address  
Book contacts, etc.) with Bluetooth devices.  
Bluetooth Secure Mode  
When the Bluetooth Visibility is turned on, your phone is  
wirelessly transmitting its phone name and status to every device  
within its range. This transmission can pose a security risk and  
incite unauthorized connection to your phone. It is recommended  
that you remain hidden unless necessary.  
Configuring Your Phone’s USB Settings  
This menu selects the method of communication for the USB  
port.  
Note: The Bluetooth feature must first be disabled before initiating a USB  
connection with the phone. Prior to connecting the USB cable to the  
phone, install the latest version of the PC Studio application. This  
application installs the necessary USB drivers onto your machine. For a  
free download of PC Studio, go to www.samsung.com/us/support.  
Bluetooth Services  
The Bluetooth specification is a protocol that describes how the  
short-range wireless technology works, whereas services  
describe the individual devices that are supported. These  
services reduce the chance that incompatible devices are  
allowed to connect to your phone.  
1. From Idle mode, touch  
Select USB Mode  
2. Select one of the following USB modes:  
Settings  
Connectivity  
.
Headset: a Bluetooth headset enables both incoming and outgoing  
calls using Bluetooth headsets.  
• Ask on Connection: causes the phone to present a “Select USB  
Mode” pop-up when you connect to the PC. You can then choose  
Handsfree: a Bluetooth car kit or speakerphone enables both  
incoming and outgoing calls.  
from either: PC Studio Media Player, or Mass Storage.  
,
Bluetooth Stereo Headset: used to make calls and listen to music  
through the Bluetooth stereo headset.  
• Samsung PC Studio: sets PC Studio to launch as the default  
application when a USB connection is detected.  
Serial Port: used to connect to other Bluetooth devices through a  
virtual serial port.  
• Media Player: sets the Media Player to launch as the default  
application when a USB connection is detected.  
Dial up: used to provide Internet access for Bluetooth devices through  
the phone’s modem.  
• Mass Storage: allows you to utilize the onboard storage capacity of  
the phone’s MicroSD card to store and upload files. This option  
allows your computer to detect the phone’s MicroSD card as a  
removable storage drive.  
File transfer: used to transfer files to and from Bluetooth devices.  
Changing Your Settings  
57  
     
Save  
3. Touch  
.
• Auth Type: select the type of authentication used for this WAP  
connection: None, Normal, or Secure.  
Network Profile Configuration  
• User ID: enter the User ID required to connect to the network.  
Your phone is wirelessly connecting to the Internet via a built in  
WAP browser. Connection can be made via either one of three  
available WAP browsers: MEdia Net, AT&T MMS (MultiMedia  
Server), and AT&T IMS. These configurations are pre-configured  
and cannot be modified by the user. You need these settings to  
use the web browser or send MMS messages or Emails. Your  
phone is set up by default to connect to the internet.  
• Password: enter the user password required to connect to the  
network.  
• Protocol: set the connection protocol used by the WAP browser:  
WAP, HTTP, or Other.  
• Home URL: enter the URL address of the page to be used as your  
homepage.  
• Proxy Address: MEdia Net set as the proxy server address and  
port.  
You can use this menu to create and customize the profiles  
containing the settings for connecting your phone to the network.  
Although the active connection can be changed by the user, it is  
recommended that this choice be made with the assistance of  
either the retailer or customer service representative.  
• Linger Time (sec.): set a time period (in seconds) after which the  
network is disconnected if there has been no new data traffic in that  
time.  
• Advanced Settings: allows you to configure some of the IP-specific  
information: Static IP, Static DNS, Server information, and Traffic  
Class.  
To create a new configuration, follow these steps:  
1. From Idle mode, touch  
Settings  
Connectivity  
Static IP: specify if you want to manually enter an IP address. If you  
want the IP address to be automatically assigned by the server, remove  
the check mark.  
Network Profiles  
.
Create  
2. Touch  
.
Static DNS: specify if you want to manually enter the Domain Name  
Server (DNS) address. If you want the address to be automatically  
assigned by the server, remove the check mark.  
3. Select the parameter you want to add or edit:  
• Set Name: enter a profile name.  
Traffic Class: select the traffic class.  
• Access Name: edit the access point name.  
58  
     
These applications are described in more detail within other  
sections of this manual.  
Note: The WAP settings may vary depending on the service provider.  
1. From Idle mode, touch  
Settings Applications  
OK  
4. Touch  
5. Touch  
to exit Advanced Settings.  
to store these new settings.  
Settings.  
Save  
2. Select the type of application which you want to change:  
IMS Settings  
• Messaging (see page 93)  
• Browser (see page 124)  
IMS is the method used to connect to the server in order set up  
the Video Share option.  
• Music Player (see page 109)  
• Mobile Video (see page 90)  
• Video Share (see page 59)  
• Record Audio (see page 60)  
• Calendar (see page 60)  
1. From Idle mode, touch  
IMS Settings  
2. Touch one of these options:  
• IMS Service allows you to set the IMS service to On or Off  
Settings  
Connectivity  
.
.
• Address Book (see page 64).  
Video Share Settings  
Important!: If you reset the IMS Service to Off, you will not be able to use the  
Video Share Option.  
To enable the Alerts, Auto Record, and Recording Location for  
Video Share, use the following steps.  
• IMS Profiles allows you to set the server that service is coming  
from. Select a profile and make your alterations.  
1. From Idle mode, touch  
Settings Video Share  
Settings Applications  
Important!: If you change from the default AT&T IMS, you may not be able to  
.
use Video Sharing.  
2. Activate any of the following options by touching the  
Applications Settings  
The Applications Settings feature allows you to configure the  
functional parameters for most of the onboard applications.  
onscreen button.  
Changing Your Settings  
59  
           
Audio Alert: allows you to turn On or Off the Video Share Alerts  
which play a tone.  
Calendar Settings  
To configure the starting day and view used when opening the  
Calendar application.  
Auto Record: allows you to turn On or Off the Auto Record which  
records the Video Share call.  
1. From Idle mode, touch  
Settings Calendar  
Settings Applications  
• Recording Location: allows you to set whether video recorded is  
stored on the Phone or on the microSD Memory Card  
.
.
Save  
3. Touch  
.
2. Touch either of the following fields and edit the  
information:  
Record Audio Settings  
Starting Day: allows you choose which day mark the first day in  
your calendar week (Sunday or Monday).  
To configure the filename and maximum length for a recording.  
1. From Idle mode, touch  
Settings Record Audio  
Settings Applications  
View by: allows you to choose the default view for appointments  
used by the Calendar application when launched (Month, Week, or  
Day).  
.
2. Touch either of the following fields and edit the  
Save  
3. Touch  
.
information:  
Address Book Settings  
Default Name: allows you to use the onscreen keyboard to enter a  
prefix name of all recorded audio files. Touch  
new name.  
to store the  
OK  
To configure your Address Book application.  
1. From Idle mode, touch  
Settings Address Book  
Settings Applications  
Recording Time: allows you to choose the maximum limit allowed  
for the recorded audio file (1 Minute, 5 Minutes, 10 Minutes,15  
Minutes, 30 Minutes, 60 Minutes, or Limit for MMS). Touch  
.
2. Touch one of the following fields and edit the information:  
Save  
to save the new Recording Time.  
• My Business Card: creates and attaches a virtual business card to  
be used as an attachment to outgoing messages. For more  
information, see “Attaching Business Card to a Message”  
on page 95.  
Save  
3. Touch  
.
60  
           
• Speed Dial: allows you to set up Speed Dial for your contacts. For  
more information, refer to “Making a Call Using Speed Dial”  
on page 23.  
• Used Space  
Clear Phone Memory  
From this menu you can clear the memory for Files, Messages,  
can all select All to clear everything listed.  
• Save New Contacts to: defines the destination for new contact  
entries (Phone, SIM Card, or Always Ask).  
• View Contacts from: to filter the display of current Address Book  
entries. Options include: All, Phone, or SIM Card.  
Note: To completely remove any personal information stored on your device,  
• Own Number: to display your current phone number.  
see “Warranty Information” on page 160.  
• Fixed Dial Contacts: assigns phone numbers as FDN entries.  
1. From Idle mode, touch  
Settings  
Memory  
• UsedSpace: displays the memory storage allocation (total available  
and remaining) within both your Phone, SIM card, and FDN list.  
Management Clear Phone Memory  
.
Save  
3. Touch  
save).  
(not all of the above options require that you  
2. Place a checkmark alongside those applications you wish  
to clear by touching individual applications  
– or –  
Memory Management  
You can easily check the amount of memory being used for  
storing data, such as messages, media, calendar data, or  
contacts entries. You can also delete any selected information  
from your phone:  
Touch All to clear all the memory settings.  
3. Touch  
4. Enter the user-defined password and touch OK to clear the  
memory settings. For more information, refer to “Change  
Phone Password” on page 51.  
1. From Idle mode, touch  
Management  
2. Touch any of the following options:  
Settings  
Memory  
.
5. Touch Yes to confirm or No to cancel.  
Clear Phone Memory  
Memory Card Details  
Changing Your Settings  
61  
       
Memory Card Details  
5. After formatting, the Memory Card Details screen appears.  
Allows you to view specific information related to the current  
microSD card being used for storage.  
6. Touch Rename if you would like to rename your memory  
card.  
From Idle mode, touch  
Settings  
Memory  
7. When you are finished, press  
to return to Idle screen.  
Management Memory Card Details  
.
Check the Used Space  
1. From Idle mode, touch  
Management Used Space.  
Settings  
Memory  
Note: Memory card is optional.  
Formatting the Memory Card  
2. Select one of the following storage categories to view the  
Allows you to format your memory card. All information on the  
memory card will be removed and new folders will be created for  
contents of a category’s memory:  
• Shared Memory  
• Messaging  
• My Stuff  
1. Ensure that your memory card is inserted properly in your  
phone. For more information, refer to “Installing the  
Memory Card” on page 6.  
• Calendar  
Tasks  
• Memo  
2. From Idle mode, touch  
Management Memory Card Details  
3. At the bottom of the screen, touch Format  
Settings  
Memory  
• Address Book  
.
3. When you are finished, press  
to return to Idle screen.  
.
4. The prompt, Formatting will erase all data. Continue? is  
displayed. Touch Yes to continue or No to cancel.  
62  
       
Software Update  
The Software Update feature enables you to use your phone to  
connect to the network and upload any new phone software  
directly to your phone.  
1. From Idle mode, touch  
Update  
Settings  
Software  
.
2. Follow the on screen instructions.  
Phone Information  
This option allows you to see the phone number on the SIM card  
(within the phone), the manufacturer, and the model number.  
This information may be necessary if talking to Customer Service  
in the event of a problem.  
1. From Idle mode, touch  
Settings Phone  
Information.  
2. When you are finished, press  
to return to Idle screen.  
Changing Your Settings  
63  
       
Section 7: Understanding Your Address Book  
This section allows you to manage your daily contacts by storing  
their name and number in your Address Book. Address Book  
entries can be sorted by name, entry, or group.  
• View Contacts from: to filter the display of current Address Book  
entries. Options include: All, Phone, or SIM Card.  
• Own Number: to display your current phone number (page 70).  
• Fixed Dial Contacts: assigns phone numbers as FDN entries  
Note: When storing an Address Book entry into your SIM card, note that only  
the name, phone number, group, and slot location are initially offered  
as fields (some SIM cards may allow an address as well). Although you  
may add additional fields to a SIM entry; if you move that same SIM  
card to another model phone, it is possible that only the basic  
information will be transferred.  
(page 70).  
• UsedSpace: displays the memory storage allocation (total available  
and remaining) within both your Phone, SIM card, and FDN list  
(page 74).  
Adding a New Contact  
Use the following procedure to store a new contact to your  
Address Book Settings  
1. Touch  
Address Book  
Address Book Settings.  
Address Book. New contacts are stored on your phone by default.  
2. Touch any of the following options to activate a function:  
Saving a Number from the Idle screen  
Create Contact  
1. Touch  
(Create Contact). This opens the  
• My Business Card: creates and attaches a virtual business card as  
an attachment to outgoing messages. For more information, see  
Add New Contact screen.  
2. Touch the image icon and assign a picture to the new entry  
• Speed Dial: touch an unused number and then assign it to  
someone in your Contacts list. From the Dial screen, touch and hold  
the number to speed dial your contact. For more information, refer  
to “Making a Call Using Speed Dial” on page 23.  
by choosing one of three options:  
• Remove although not an option with a new entry, deletes any  
previously assigned image.  
• Save New Contacts to: defines the destination for new contact  
entries (Phone, SIM Card, or Always Ask).  
Take Photo to use the camera to take a new picture and assign it  
to this entry.  
64  
                 
• Caller Image to retrieve a previously stored image from your  
Picture folder and assign it to this entry. Select an image and touch  
Add to assign the image and return to the previous Add New  
Contact screen.  
• Group: assigns this contact to group. Touch an group type to  
complete the assignment. For more information, refer to  
“Creating New Group” on page 71.  
• Ringtone: assigns a ringtone for this contact information. Choose  
and use the onscreen keyboard to enter names for the new  
OK  
Last Name, and Display Name fields  
from Tones, Music, or Recorded Audio categories. Touch a music  
file to play a short sample and then touch Add to complete the  
assignment.  
entry, and touch  
. (For more information, refer to  
• Vibration: assigns a vibration type for this contact information.  
Touch a setting (Vibration 1 - 5) to be provided with a sample.  
“Entering Text” on page 34.)  
• First Name: allows you enter a first name for this entry.  
• Birthday: assigns a calendar date for the contact’s birthday. Touch  
OK to store the new date.  
• Last Name: allows you enter a Last name for this entry.  
• Display Name: allows you enter a display name for this entry which  
then appears when you receive a call from this contact.  
• Note: allows you enter notes associated with this contact. (For  
4. Touch the Mobile field and use the onscreen keypad to  
Save  
7. Touch  
to store the new entry into the Address Book.  
OK  
enter the phone number for the entry, and touch  
5. Touch to change the category type of the entry.  
Choose from among: Mobile Home Work Fax, or Others.  
.
Note: By default, Contacts are saved on the phone. To copy them to a SIM  
card, see “Copying an Entry to the SIM Card” on page 73.  
,
,
,
Adding More Fields to a Number  
6. Use your fingertip to scroll down the screen and touch any  
of the remaining fields to update their information. Touch  
While in the process of creating a new entry or editing an existing  
OK  
contact, you can add additional fields to the entry’s list of  
, if required, to save your updates. Available fields  
information.  
consist of:  
Add More Fields  
1. Within the open Contact Screen, touch  
(Add More  
• Email: adds a contact email address for this entry.  
Fields).  
Understanding Your Address Book  
65  
 
2. Place a checkmark adjacent to an individual field by  
• Address - Home: adds a field used to assign a physical home  
address for this entry.  
touching each entry.  
– or –  
• Address - Work: adds a field used to assign a physical work  
address for this entry.  
Place a checkmark alongside all entries by touching All  
.
Done  
3. Touch  
to store the new fields to the entry and  
Additional fields include:  
return to the previous screen.  
– or –  
• Mobile: adds an additional Mobile number field for the entry.  
• Home: adds an additional Home number field for the entry.  
• Work: adds an additional Work number field for the entry.  
• Fax: adds an additional Fax number field for the entry.  
• Others: adds an Others field for the entry.  
Add More  
Fields  
To add even more fields, touch  
previous step.  
and repeat the  
Deleting Fields From a Number  
1. Within the open Contact Screen, touch  
Delete  
(Delete  
Fields  
• Email: adds an additional contact Email address field for this entry.  
• URL: adds a Web site’s URL to the entry.  
Fields).  
• DTMF: adds a DTMF tone string for use with this entry.  
• Group: creates an additional group field for group assignment.  
Note: Only certain new fields may be deleted. If you have not added any new  
fields to the contact, the Delete Fields button will not appear.  
• Message Tone: adds a field used to assign a message tone that  
will sound when messages are received from this contact.  
2. Touch each field you wish to delete and a checkmark will  
appear.  
• NickName: adds a field that can be used to enter a nickname for  
the entry. The NickName is not displayed when calls are made to or  
received from the contact.  
Delete  
3. Touch  
.
Save  
4. Once you have made your deletions, touch  
to store  
• Company: adds a Company field for this entry.  
the contact and its fields.  
• Job Title: adds a Job Title field for this entry.  
66  
 
Saving a Number During a Call  
1. Touch  
number.  
and use the onscreen keypad to enter your  
2. Press  
or touch  
to initiate the call.  
To call the  
selected number  
More  
3. Touch  
Save to Address Book New.  
Select Update if this was a previously created entry and your are  
adding the current number to the previous entry.  
4. Enter the desired information, see “Saving a Number from  
the Idle screen” on page 64.  
To save the  
number to the  
Address Book  
Saving a Number After a Call Has Ended  
1. Press  
to bring up the recent calls screen.  
– or –  
Save  
3. Touch  
New.  
Touch  
My Stuff  
Tools  
Recent Calls.  
Select Update if this was a previously created entry and your are  
adding the current number to the previous entry.  
2. Touch a phone number from the list to reveal the Details  
4. Enter the desired information, see “Saving a Number from  
page (shown below) for the phone entry.  
the Idle screen” on page 64.  
Adding Pauses to Contact Numbers  
When you call automated systems, you are often required to  
enter a password or account number. Instead of manually  
Understanding Your Address Book  
67  
   
OK  
entering the numbers each time, you can store the numbers in  
your Contacts along with special characters called pauses.  
5. Touch  
.
Save  
6. Touch  
to store your changes.  
To add a pause to a Contact:  
Using Contacts  
1. Touch  
, and then touch the image icon or name to  
Dialing a Number from Address Book  
open the Contact.  
Once you have stored phone numbers in the Address Book, you  
can dial them easily and quickly by either using their SIM card  
location number or by using the Search field to locate the entry.  
Edit  
2. Touch  
and then select the desired phone number.  
3. Touch the Phone Number field and then touch the screen at  
the place where the additional numbers need to be added.  
Note: The default Address Book entries are: *Now - *669, Check Bill Balance  
- *225#, Customer Care - 1-800-331-0500, Directory Assistance -  
411, Pay My Bill - *729, View Data Usage - *3282#, View My Minutes -  
*646#, Voice Dial - *08, and Music ID - #43.  
4. Press  
to add a two-second pause, and use the keypad  
to enter the additional numbers.  
Finding an Address Book Entry  
Note: If more than a two-second pause is required, press  
as many times  
as needed to add additional two-second pauses.  
You can store phone numbers and their corresponding names  
onto your SIM card and phone’s onboard memory. The two  
locations are physically separate but are used as a single entity,  
called the Address Book.  
Depending on your particular SIM card, the maximum number of  
phone numbers the SIM card can store and how they are stored  
may differ.  
1. In Idle mode, touch  
Address Book  
Contacts.  
68  
       
2. Touch the Contacts Filter field (upper-right) and select  
1. Touch  
and touch an Address Book name from the list  
Contacts. Additional entry categories include Groups and  
to reveal the Entry Options page (shown below) for the  
Favorites.  
phone entry.  
Contacts Filter  
Phone Options  
Additional  
Options  
2. Touch  
• Call  
to reveal the first set of options:  
:
allows you to call a currently selected entry.  
3. When found, touch  
adjacent to the entry to make the  
• Video Share: allows you to share either a live video recording or  
recorded video with a phone that is similarly equipped, and if both  
SIMs have the feature enabled.  
call.  
Address Book Entry Options  
While in the details page for a specific entry (seen below) you  
have two sets of options, each accessible from two of the  
onscreen buttons.  
• Send Message  
:
allows you to send a text message or a multimedia  
message to the selected entry.  
3. Press to return to the previous Entry Options page.  
Understanding Your Address Book  
69  
   
Edit  
4. Touch  
to alter the properties of the current entry  
Note: FDN Mode must be set to On in the Menu  
Settings  
Phone  
such as: Name, Number, Email, Group, or Birthday. Touch  
Security  
Fixed Dialing Mode option before you can add, change, or  
delete contacts on the FDN List.  
Save  
to store your changes.  
Delete  
Changing the FDN mode Status  
5. Touch  
to delete the current address book entry from  
a target location such as the Phone and/or SIM card.  
More  
1. In Idle mode, touch  
Settings  
Phone  
Security.  
6. Touch  
to reveal the second set of entry options:  
2. Scroll down to the Fixed Dialing Mode field and touch  
On (to enable fixed dialing) or Off to disable the option.  
• Send Business Card via: allows you to send a business card  
containing information on the selected contact.  
This can be sent as either a message or via Bluetooth.  
Important!: With Fixed Dial Mode enabled, you will NOT be able to dial any  
number other than those created Fixed Dial Numbers.  
• Add to Favorites: allows you add the current contact entry to your  
favorite list of callers (Favorites list).  
Creating New FDN Numbers  
Finding My Own Phone Number  
This function is a memory aid, which you can use to check your  
own phone number if you need to do so.  
With the Fixed Dial mode On, follow these procedures:  
1. In Idle mode, touch  
Contacts Create FDN  
Address Book  
Fixed Dial  
.
In Idle mode, touch  
Settings Own Number  
FDN Mode  
Address Book  
Address Book  
<voice line #>  
.
Note: If FDN is Off: touch Menu -> Address Book -> Address Book Settings ->  
Fixed Dial Contacts -> Create FDN. Then follow steps 2-7.  
FDN (Fixed Dialing Number) mode, if supported by your SIM card,  
restricts your outgoing calls to a limited set of phone numbers.  
When this feature is enabled, you can make calls only to phone  
numbers stored in the FDN list on the SIM card.  
OK  
2. Enter your PIN2 password and touch  
provided to you by your Service Provider.  
3. Touch Name and use the onscreen alphanumeric keypad to  
OK  
. This number is  
enter a name for this FDN contact. Touch  
.
70  
           
4. Touch Phone Number and use the onscreen numeric  
Take Photo  
:
to use the camera to take a new picture and assign it  
to this entry.  
keypad to enter a contact phone number for this FDN  
• Group Picture: to retrieve a previously stored image from your  
Picture folder and assign it to this group entry.  
OK  
contact. Touch  
.
5. Touch the SIM card location field to then use the onscreen  
4. Touch Group Ringtone to choose an audio file for  
numeric keypad to enter a location value for the entry on  
assignment to this new group. Choose from Tones  
,
Music,  
OK  
the SIM card. Touch  
.
or Recorded Audio categories.  
Save  
6. Touch  
to store the new FDN entry.  
to return to Idle mode.  
Touch a music file to play a short sample and then touch Add to  
complete the assignment.  
7. Press  
5. Touch Group Vibration to choose a vibration type for  
Group Settings  
Creating New Group  
1. In Idle mode, touch  
assignment to this new group. Choose from five vibration  
options (Vibration 1-5).  
Address Book  
Groups  
Touch a vibration option to activate a short sample and then touch  
Save to complete the assignment.  
Save  
6. Touch  
to store the new Group category.  
2. Touch the Group Name field and use the onscreen  
keypad/keyboard to enter a new group name. For more  
Adding an Entry to a Group  
1. In Idle mode, touch  
information, refer to “Entering Text” on page 34.  
Address Book  
Groups.  
OK  
to store the new group name.  
Touch  
2. Touch a group entry.  
3. Touch the Group Picture field and choose a location for the  
3. Touch Add Member and place a checkmark alongside those  
new image:  
entries you wish to add to the current Group.  
• Reset: although not an option with a new group, deletes any  
previously assigned image.  
4. Touch Add  
.
Understanding Your Address Book  
71  
         
Removing an Entry From a Group  
Adding Favorites to your Address Book  
1. In Idle mode, touch  
Address Book  
Groups  
.
1. From the Idle screen, touch Favorites  
(
).  
– or –  
2. Touch a group entry.  
In Idle mode, touch  
2. Touch  
3. Select either Existing Contact or New Contact  
Address Book  
Favorites.  
3. Touch Remove Member and place a checkmark alongside  
those entries you wish to remove from the current Group.  
.
4. Touch Remove  
.
.
Editing a Caller Group  
4. Select the Contacts you want to add to your Favorites or  
create a new Contact.  
To edit a Group entry, there must be at least one member as part  
of the selected group.  
5. Touch  
.
1. In Idle mode, touch  
Address Book  
Groups.  
Removing Favorites from your Address Book  
Address Book Favorites.  
2. Touch a current Group entry.  
1. In Idle mode, touch  
2. Touch  
3. Touch  
.
4. Make modifications to the Group Name  
,
Group Picture,  
3. Touch the Contacts you want to remove from your  
Group Ringtone, and Group Vibration fields. For more  
Favorites. A checkmark will appear in the box.  
information, refer to “Creating New Group” on page 71.  
4. Touch  
.
Save  
5. Touch  
to store your changes.  
Managing Address Book Entries  
You can copy, delete, and view the memory status for the Phone  
and SIM entries on your phone.  
Address Book Favorites  
Once you have stored phone numbers in the Address Book, you  
can add them to your Favorites list.  
72  
             
Copying an Entry to the SIM Card  
displays a list of your current contacts held on the SIM  
card.  
Note: When storing an Address Book entry into the SIM card, note that only  
the name, phone number, group, and slot location are initially offered  
as fields (some SIM cards may allow an address as well). To save  
additional information for a particular contact, such as other phone  
numbers, or e-mail, it is important to add new fields to that Contact  
information. It is also important to note that if you move the SIM card to  
another phone that does not support additional fields on the SIM card,  
this additional information may not be available.  
If the entry’s associated Group image has a SIM location icon on it,  
then the entry exists on the SIM card. This is the type you can  
duplicate.  
If the entry’s associated Group image does not have a SIM location  
icon, then this entry currently exists on the phone.  
2. Place a checkmark adjacent to those entries you wish to  
1. In Idle mode, touch  
Address Book  
SIM  
have copied from the SIM card to the Phone.  
Management Copy Contacts to SIM. The phone then  
Repeat this step for all individual entries you wish copied to the  
Phone or touch All to place a checkmark alongside all entries.  
displays a list of your current contacts.  
3. Touch Copy  
.
2. Place a checkmark adjacent to those entries you wish to  
4. When you are finished, press  
to return to Idle mode.  
have copied to the SIM card.  
Repeat this step for all individual entries you wish copied to the SIM  
or touch All to place a checkmark alongside all entries.  
Deleting All of the Address Book Entries  
You can delete all Phone or SIM entries from your phone’s  
memory.  
3. Touch Copy. The selected numbers are copied to the SIM  
card.  
Deleting all entries from the Phone  
4. Press  
to return to Idle mode.  
1. In Idle mode, touch  
Delete  
Address Book  
Contacts  
.
Copying an Entry to the Phone  
1. In Idle mode, touch  
Address Book  
SIM  
2. Touch the All field to place checkmarks alongside all the  
Management Copy Contacts from SIM. The phone then  
current Address Book entries.  
Understanding Your Address Book  
73  
         
3. Touch Delete  
.
2. Scroll through the available numbers.  
4. When you are finished, press  
to return to Idle mode.  
3. To dial the number displayed, press  
.
Deleting all entries from the SIM  
Note: This menu is available only when your SIM card supports Service  
1. In Idle mode, touch  
Address Book  
SIM  
Dialing Numbers.  
Management Delete Contacts from SIM  
.
Checking the Address Book’s Used Space  
Touch the All field to place checkmarks alongside all the  
You can check how many names and numbers are stored in the  
Address book, in both SIM card and the phone memory. You can  
also see the capacity of both memories.  
current Address Book entries.  
2. Touch Delete  
.
1. In Idle mode, touch  
Settings Used Space.  
Address Book  
Address Book  
3. At the prompt, touch Yes to delete all entries from the SIM  
or touch No to cancel.  
• Phone: tells you how many Address Book entries (out of a possible  
1000) are in use.  
4. When you are finished, press  
to return to Idle mode.  
• USIM: tells you how many entries are in use on your SIM card.  
Note: Entries on the FDN Address Book must be deleted from within the FDN  
Additional No. 1: if you have added additional numbers to contacts  
saved on the SIM card, this is a counter of the number of SIM contacts  
with a second number saved on your SIM card.  
Address Book  
Using the Service Dialing Numbers  
Additional No. 2:if you have added additional numbers to contacts  
saved on the SIM card, this is a counter of the number of SIM contacts  
with a third number saved on your SIM card.  
You can view the list of Service Dialing Numbers (SDN) assigned  
by your service provider. These numbers may include emergency  
numbers, customer service numbers, and directory inquiries.  
Email: tells you how many entries are in use.  
1. In Idle mode, touch  
Address Book Service  
• FDN: tells you how many entries are in use on your FDN SIM  
memory.  
Numbers.  
74  
       
Note: Depending on the SIM card, the number of entries may differ.  
2. Once finished, press  
to return to Idle mode.  
Yellow Pages Mobile  
The Yellowpages Mobile application provides quick and ready  
access to businesses, map locations, and storage of your favorite  
searches (My Place). This application allows you to tap into local  
businesses, locations, and events, connecting you to your search  
in real-time.  
1. Touch  
YPmobile.  
2. Follow the onscreen prompts to enter the desired business  
name, location or search by category types.  
Understanding Your Address Book  
75  
   
Section 8: My Stuff  
The topics covered in this section include Applications, Audio,  
Games, Picture, Tools, Video, Other Files, and Used Space.  
• Manage: allows you to move or copy an existing unlocked folder or  
file.  
• More: provides you with the ability to Delete, Rename, Sort by,  
Send via Bluetooth, Bluetooth Visibility, and Lock/Unlock certain files  
or folders.  
1. Touch  
2. Select from one of the following functions: Applications  
Audio Games Picture Tools Video Other Files, or Used  
Space  
3. Touch the filter drop down (upper-right of My Stuff page) to  
My Stuff.  
,
,
,
,
,
,
Creating a New Folder  
My Stuff  
2. Use the onscreen alphanumeric keypad to create a new  
.
1. Touch  
Create Folder.  
filter the entries based on their current location (All Phone,  
,
OK  
name for the folder and touch  
once your are done.  
or Memory Card).  
Managing Files and Folders  
My Stuff Functions  
This page provides you with several functions that can be  
activated from virtually any page within the My Stuff directories.  
Most editing features are only applicable to those files/folders  
that are not locked, and therefore editable.  
1. Touch  
My Stuff  
Manage.  
2. Select a migration option by touching either Move or Copy  
.
• Move: takes an unlocked file/folder and moves it to a new location.  
• Copy: takes the unlocked file/folder and duplicates it in the new  
location.  
1. Touch  
My Stuff.  
3. Select an unlocked entry by touching it to then place a  
2. Select from the following:  
checkmark next to the entry.  
• Create Folder: create a new My Stuff folder on either the Phone or  
Memory Card.  
Touch All to place a checkmark alongside all available/unlocked  
items.  
4. Once complete, touch Move/Copy.  
76  
   
5. Touch Phone or Memory Card depending on where you  
Audio  
want to copy or move the files to.  
The Audio menu option allows you to shop tones, answer tones,  
and music using AppCenter. You can also access previously  
stored (pre-recorded) audio files from your internal microSD card.  
6. Select the folder to copy or move the files to. Touch New  
folder to create a new folder.  
1. Touch  
My Stuff  
Audio.  
7. Touch Paste here/Move here to copy or move the files.  
2. Touch an onscreen option (Tones Answer Tones, Music, or  
,
More Functionality  
Recorded Audio).  
1. Touch  
My Stuff  
More.  
Tones  
2. Select an onscreen option:  
You can shop, download, and save to your Downloaded  
Ringtones folder.  
• Delete: erases selected files/folders.  
• Rename: renames the selected files/folders.  
1. Touch  
My Stuff  
Audio  
Tones. A menu then  
• Sort by: sorts the current available files and folders using either:  
Date, Type, Name, or Size.  
displays to give you the option of either shopping for tones  
or selecting from files previously stored to your phone.  
• Send via Bluetooth: sends a selected file via Bluetooth to another  
compatible device.  
2. Touch Shop Tones select a file to download, and follow  
the on-screen options. (These files are downloaded and  
stored in the Tones folder.)  
• Bluetooth Visibility: allows you to make specific files visible to  
other Bluetooth devices.  
• Lock/Unlock: locks or unlocks available files and folders.  
– or –  
Applications  
The Applications menu option allows you to access applications  
Touch an available entry.  
3. From the playback page, touch Set as and select from the  
and shop for applications using AppCenter (MEdia Mall).  
following options:  
For more information, refer to “Applications” on page 103.  
My Stuff  
77  
         
• Call Ringtone: allows you to assign the selected ringtone for use  
with general incoming calls when no other caller ringtone has been  
assigned.  
Music  
This menu displays all of your purchased songs. From this menu,  
you can also shop for music using the browser.  
• Caller Ringtone: allows you to assign a ringtone to someone in  
your Contacts list. Select Search Contact to find an existing contact  
or Create Contact to create a new one.  
1. Touch  
My Stuff  
Audio  
Music  
Shop Music  
to launch AppCenter.  
• Alarm Tone: allows you to assign the tone to an alarm.  
2. Follow the on-screen options.  
Answer Tones  
Recorded Audio  
You can shop and download Answer Tones, manage your Answer  
Tones, and access Help files. To access the Answer Tones menu  
option, use the following steps:  
This menu shows a list of saved voice memos. When a voice  
memo is recorded and saved, it is stored in the Recorded Audio  
folder. To access this menu use the following steps:  
1. Touch  
My Stuff  
Audio  
Answer Tones.  
1. Touch  
2. Touch a pre-recorded memo to begin playback.  
3. To exit, press  
My Stuff  
Audio  
Recorded Audio.  
2. Touch one of the following options and follow the onscreen  
instructions.  
.
• Shop Answer Tones: launches the browser from which you can  
touch Shop Answer Tones, then follow the onscreen instructions to  
purchase a file.  
1. Touch  
My Stuff  
Tools  
Record Audio.  
• Manage Answer Tones: launches the browser from which you can  
assign Answer Tones to Callers and Groups, turn your greeting on  
or off, and shop for more Answer Tones.  
2. To start recording, touch  
.
For more information, refer to “Record Audio” on page 131.  
• About Answer Tones: launches the browser from which you can  
navigate through the frequently asked questions regarding Answer  
Tones.  
78  
       
2. Follow the onscreen options to purchase the new image.  
Games  
The file is downloaded and stored in the Picture folder.  
The Games menu option allows you to shop games using  
AppCenter. You can download new games, then save them to the  
Games folder.  
Image Features  
Touch a graphic from the Pictures page to display the image.  
functions (Zoom, Edit, and Info) and menu options.  
For more information, refer to “Games” on page 103.  
Picture  
Zoom: allows you to magnify the current image.  
Edit: allows you to edit the current image by applying various image  
effects. For more information, refer to “Editing Images” on page 80.  
The Picture menu option allows you to shop for and download  
new graphics (using AppCenter), then save them to your Picture  
folder. To access the Picture menu option, use the following  
steps:  
Note: Editing is only available for unlocked images or non DRM images.  
Touch  
My Stuff  
Picture.  
From the Picture page you can access the following menu  
options (see “My Stuff Functions” on page 76.):  
Information: displays an onscreen listing of the image’s properties  
such as: name, format, size, etc.  
• Create Folder: create a new My Stuff folder on either the Phone or  
Memory Card.  
Send: lets you send the currently active image as part of a new  
multimedia message or to an external device via Bluetooth.  
Set as: allows you to assign the current image as either your current  
Wallpaper, or as a display image used by a specific entry within your  
Address Book.  
• Manage: allows you to move or copy an existing unlocked folder or  
file.  
• More: provides you with the ability to Delete, Rename, Sort by,  
Send via Bluetooth, Bluetooth Visibility, and Lock/Unlock certain files  
or folders.  
More: allows you to choose from the following image options:  
• Delete: allows you to delete the current graphic.  
Shop Graphics  
• Rename: allows you to rename the current graphic.  
1. Touch  
My Stuff  
Picture  
Shop Graphics.  
AppCenter is launched.  
My Stuff  
79  
         
• Slide Show: allows you play a slideshow using the graphics  
currently available from within the Picture folder. Press  
the slideshow.  
• Crop: allows you to crop the image. Touch one corner of the image  
to stop  
and, in a single motion, drag to another location to create the crop  
area, then touch Crop  
• Insert: allows you to add Frames  
and Text to the image.  
.
• Bluetooth Visibility: allows you to make specific graphics visible to  
other Bluetooth devices.  
,
Picture, Clip Art, Emoticon,  
• Lock/Unlock: locks or unlocks available files.  
• Memo on screen: allows you to select a color, then handwrite a  
message onto the current image. Touch Done to store the new  
changes.  
• Properties: allows you to view the properties of a photo.  
Editing Images  
Tools  
1. Touch  
Note: Pre-loaded images cannot be edited.  
2. Touch Edit ) Files Open or Save as (to save a  
My Stuff  
Picture  
<image>.  
The Tools folder provides access to and allows you to use the  
Camera, Voice Recognition, Record Audio files, set Alarms, use  
the Calendar features, view Recent Calls, use the Sketchpad,  
create Memos, create Tasks, use the Calculator, use the Tip  
Calculator, use the Converter (for currency, length, weight,  
volume, area, and temperature), view World Clock, set the Timer,  
and use the Stopwatch.  
(
renamed copy of this image).  
– or –  
Touch Edit  
(
) Edit and select from any of the  
For more information, refer to “Tools” on page 130.  
following:  
Video  
This menu allows you shop for videos and to set up folders to  
save your videos using AppCenter.  
• Effects: allows you to choose from among several effects such as:  
Filter Style Warp, or Partial Blur  
,
,
.
• Adjust: allows you to adjust Auto Level  
,
Brightness, Contrast,  
1. Touch  
My Stuff  
Video  
Shop Videos.  
and Color  
.
AppCenter is launched.  
Transform: allows you to Resize Rotate, and Flip the image.  
,
80  
         
2. Follow the onscreen options to purchase the new video.  
The file is downloaded and stored in the Video folder.  
Other Files  
This feature provide additional storage of other miscellaneous file  
types that may not fit into any of the previous categories.  
Access the Other Files menu by selecting My Stuff  
Files  
Used Space  
Other  
.
The Used Space menu option allows you to view the usage and  
available memory for Applications, Audio, Games, Picture, Video,  
and Other Files. To access the Used Space option, use the  
following steps:  
1. Touch  
My Stuff  
Used Space.  
The memory usage for the different items are listed.  
2. To delete items to free up memory, choose from  
Applications Audio, Games, Picture, Video, or Other Files.  
,
3. Touch the items you want to delete. A checkmark should  
appear in the box next to the item. Touch All to delete all  
items.  
4. Touch Delete  
.
My Stuff  
81  
         
Section 9: Camera  
This section explains how to use the camera on your phone. You  
can take photographs and shoot video by using the built-in  
camera functionality. Your 2.0 megapixel camera produces  
photos in JPEG format.  
3. Press the Camera key until the shutter sounds. (The  
storage location. If no microSD is installed, all pictures will  
be stored on the Phone.) For more information, refer to  
“Camera and Camcorder Options” on page 83.  
Important!: Do not take photos of people without their permission.  
Do not take photos in places where cameras are not allowed.  
Do not take photos in places where you may interfere with  
another person’s privacy.  
Current mode Display Image Pictures Remaining  
Using the Camera  
Taking Photos  
Taking pictures with your device’s built-in camera is as simple as  
choosing a subject, pointing the camera, then pressing the  
camera key.  
Note: When taking a photo in direct sunlight or in bright conditions, shadows  
may appear on the photo.  
1. In Idle mode, press the Camera key  
to activate the  
Settings  
Current Configurations  
camera mode.  
2. Using the phone’s main display screen as a viewfinder,  
adjust the image by aiming the camera at the subject.  
82  
           
Note: The number of JPEG pictures remaining on the selected media appears  
in the upper-right of the screen. This is an approximate number of total  
pictures which can be taken at the current image size.  
Recording Mode: allows you to set the recording mode to  
either: Normal (limited only by available space on  
destination location), Limit for MMS (limited by MMS size  
restrictions), Video Share (only available in Camcorder  
mode).  
4. If desired, before taking the photo, you can touch onscreen  
icons to access various camera options.  
Shooting mode: allows you to set the shooting mode.  
Options are:  
5. When viewing a picture after you have taken it, use the Up  
and Down Volume keys to zoom in or out. You can magnify  
the picture up to x10.  
S
Single: takes a single photo and view it before  
returning to the shooting mode.  
6. Press  
to return to the viewfinder.  
Continuous: takes a succession of consecutive photos  
by pressing and holding the Camera key.  
Camera and Camcorder Options  
Options are represented by icons across both sides of the screen.  
Panorama: takes a landscape photo by taking an  
initial photo and then adding additional images to  
itself. The guide box lets you view the area where the  
second part of the panoramic picture should fall  
within.  
Note: The options will disappear after a few seconds. Touch the screen and  
they will reappear.  
Smile Shot: the camera focuses on the face of your  
subject. Once the camera detects the person’s smile,  
it will take the picture.  
Camera/Camcorder/VideoShareMode:allowsyoutotakea  
photo in various modes. Once you change the mode, the  
corresponding indicator appears at the top left of the  
display. Choose from Camera, Camcorder, or Video Share.  
Mosaic: takes multiple photos and then groups them  
together into a single final photo.  
Camera  
83  
   
Shooting mode (continued)  
:
Image Quality: allows you to set the image quality to:  
S
Superfine, Fine, or Normal.  
Frame: allows you to choose a custom frame border  
for your image. Choose from one of the 20 available  
frames. Touch OK to assign the frame.  
Camcorder  
:
Effects: allows you to change the color tone or apply  
special effects to the video. Options include: None,  
Black and White, Sepia, Negative, or Watercolor.  
Camera Resolution: allows you to set the image size to  
either: 2M(1600x1200), 1M(1280x960), 0.3M(640x480),  
or 320x240.  
Video Quality: allows you to set the video quality to:  
Fine, Normal, or Economy.  
Camcorder Resolution: allows you to set the video size to  
either: 320x240 or 176x144.  
Settings tab  
:
Guidelines: allows you to turn the guidelines On or Off.  
Settings: allows you to customize your camera settings.  
Choose the following options and touch OK  
:
Review: allows you to review the photo or video  
immediately after taking it.  
Camera  
:
GPS: allows you to turn GPS On or Off (also known as  
Geotagging). The location of where the picture is  
taken is attached to the picture. This option is only  
available in Camera mode.  
Effects: allows you to change the color tone or apply  
special effects to the photo. Options include: None,  
Black and White, Sepia, Negative, or Watercolor.  
Exposure Meter: allows you to set how the camera  
measures or meters the light source: Matrix,  
Center-Weighted, or Spot.  
Shutter Sound: allows you to select a tone to play  
when the camera’s shutter opens and closes. Sound  
selections are Shutter 1, Shutter 2, Shutter 3, or Off.  
Night Mode: allows you to set the Night Mode to On or  
Off.  
84  
   
Pictures/Videos Folder Options  
Settings tab (continued)  
:
After you have taken a photo or shot a video, you can access  
various options from the Pictures/Video Folder page.  
Audio Recording: allows you to record audio while  
recording video. Selecting Off, temporarily mutes the  
microphone and records only video. This option is  
only available in Camcorder mode.  
Play Slideshow  
Image/Video  
Send  
Set as  
Storage: allows you to configure the default storage  
location for images/videos as either Phone or Memory  
Card (if inserted).  
White Balance: allows you to set this option from the  
following choices: Auto, Daylight, Incandescent,  
Fluorescent, or Cloudy.  
Timer: allows you to set a time delay before the camera  
takes the photo or the camcorder begins recording video.  
Optionsinclude: Off, 2seconds, 5 seconds, or10 seconds.  
Edit  
Information  
Return to previous page  
Delete  
Touch  
and then touch one of the available  
Brightness: allows you to adjust the brightness level by  
moving the slider across the page.  
options:  
Play Slideshow  
(
): to play the available images (from the Picture  
AccessPictures/VideoFolderOptions:allowsyoutoaccess  
the options page for a selected image/video. Options  
include: Play slideshow, Edit, Information, Send, Set as,  
Delete, and Return to previous page.  
and Video folders) within a slideshow. Touch the Up/Down arrows to  
set the duration of each onscreen image.  
Camera  
85  
   
Edit  
(
): allows you to edit the current image using any of the  
Set as  
(
): allows you to assign the current image as either your  
following:  
current Wallpaper, or as a display image used by a specific entry  
within your Address Book.  
Effects: allows you to choose from among several effects such as  
Filter Style Warp, and Partial blur  
Adjust: allows you to adjust Auto Level  
Color  
Transform: allows you to Resize  
,
,
.
Delete  
Return  
(
): erases the currently selected image/video.  
,
Brightness, Contrast, and  
(
): takes you back to the previously active camera or  
.
camcorder page where you can take another photo or shoot a new  
video.  
,
Rotate, and Flip the image.  
Crop: allows you to crop the image. Touch one corner of the image and,  
Accessing the Picture Folder  
My Stuff Picture.  
in a single motion, drag to another location to create the crop area,  
then touch Crop  
1. Touch  
.
Insert: allows you to add Frames Picture, Clip Art, Emoticon, and  
Text to the image.  
Memo on screen: allows you to select a color, then handwrite a  
message onto the current image. Touch Done to store the new  
changes.  
,
2. Touch a photo to open it in the viewer.  
Selecting and Using the Picture Folder  
Touch a picture from the Picture page to display the image. From  
the image viewer page, you have access to both macro functions  
(Zoom, Edit, and Info) and menu options.  
Note: Edit and Set as features are not available when the camcorder mode is  
active.  
Note: Menu options only appear in portrait view.  
Information  
size, resolution, etc.  
Send ): lets you send the currently active image as part of a  
(
): displays file information such as name, format,  
For more information, see “Image Features” on page 79.  
Editing a Photo  
(
new multimedia message, to an external device via Bluetooth, or to  
HP’s Snapfish.  
For information on editing a photo, see “Editing Images” on  
page 80.  
86  
 
Assigning an Image to an Address Book Entry  
Using the Camcorder  
1. Touch  
My Stuff  
Picture  
<image>.  
In addition to taking photos, the camera also doubles as a  
camcorder allowing you to also record, view, and send videos.  
2. Touch Set as  
Caller Image  
Search Contact, touch an  
Shooting Video  
Save  
onscreen entry and touch  
– or –  
.
Tip: When shooting video in direct sunlight or in bright conditions, it is  
recommended that you provide your subject with sufficient light by  
having the light source behind you.  
the create a new Address Book entry with the image  
already assigned. For more information, refer to  
“Understanding Your Address Book” on page 64.  
1. In Idle mode, press the Camera key  
to activate the  
camera mode.  
2. Touch  
then touch Camcorder (  
).  
Assigning an Image as a Wallpaper  
3. Using the phone’s main display screen as a viewfinder,  
1. Touch  
My Stuff  
Picture  
<image>.  
adjust the image by aiming the camera at the subject.  
2. Touch Set as  
Wallpaper  
.
4. Press the Camera key again to begin shooting video.  
3. Touch the screen to reveal the adjustment tools:  
5. Touch  
save the video file to your Video folder.  
– or –  
Before shooting, touch  
or the Camera key to stop the recording and  
• Zoom slider: touch the magnifying icons at either the top or bottom  
of the slider to adjust the magnification of the current image.  
• Rotate: orients the current image in either a landscape or portrait  
orientation. The bottom left of the page indicates how much of the  
image will be displayed as the wallpaper.  
and select  
.
Set  
4. Touch  
to store the new settings and assign the  
Video Share allows you to make a Video Share call by displaying a  
screen where you can input the number of a recipient that also has  
Video Share. (This option will only display if you have the Video  
wallpaper image.  
Camera  
87  
       
Share service.) If the recipient accepts the Video Share call, you  
continue using the camcorder as usual.  
Note: Edit and Set as are not a features available when the camcorder mode  
is active.  
Touch  
to end the Video Share session. The  
recorded file is saved automatically and the file name is displayed.  
You can then continue the call or terminate it.  
Information  
size, resolution, etc.  
Send ): lets you send the currently active video as part of a new  
multimedia message, or to an external device via Bluetooth.  
(
): displays file information such as name, format,  
6. Once the file has been saved, touch  
to play back your  
(
video for review.  
Delete  
Return  
(
): erases the currently selected video.  
7. Press  
to return to the viewer.  
(
): takes you back to the previously active camcorder  
Camcorder Options  
page where you can shoot a new video.  
Accessing the Video Folder  
My Stuff  
2. Touch a video to open it in the viewer and initiate playback.  
3. To play the video, touch  
Camcorder options are represented by icons across both sides of  
the screen.  
1. Touch  
Video.  
For more information, refer to “Camera and Camcorder Options”  
on page 83.  
.
Camcorder Options after a Video is Taken  
Options available from the main Video page, and before you  
select it to play:  
After you have shot a video, you can use various options that  
appear as icons on the screen. Touch an icon to activate the  
function.  
Create Folder: create a new My Stuff folder on either the Phone or  
Memory Card.  
Touch  
and then touch one of the available  
Manage: allows you to move or copy an existing unlocked folder or  
file.  
options:  
Play Slideshow  
(
): to play the available images (from the Picture  
Move: allows you to choose the Selected or Multiple videos to move.  
and Video folders) within a slideshow. Touch the Up/Down arrows to  
set the duration of each onscreen image.  
Copy: allows you to copy a selected or multiple videos.  
88  
     
More: provides you with the ability to Delete, Rename, Sort by, Send  
via Bluetooth, Bluetooth Visibility, and Lock/Unlock certain files or  
folders.  
Portrait Mode  
portrait view. From the Portrait View, touch  
Landscape mode.  
(
): allows you to change the display mode to the  
to return to  
Delete: allows you to delete the Selected video or Multiple videos.  
Rename: allows you to rename the video file.  
Sort by: allows you to sort video clips by Date, Type, Name, or Size.  
Send via Bluetooth: allows you to send the video to a Bluetooth  
device.  
Bluetooth Visibility: allows you to make the Selected or Multiple  
videos visible to Bluetooth devices.  
Lock/Unlock: allows you to lock/unlock the video file to prevent  
deletion. Lock prevents the video clip from being deleted; Unlock allows  
the video clip to be deleted.  
Pause/Resume: (  
played, and then resume playing.  
Previous/Next: ( allows you to jump to either the  
previously played video or the next file in the Videos folder.  
Exit: ( )takes you back to the Videos page.  
)allows you to pause the video being  
)
Once you have selected the video to play, your options are:  
Options  
(
): to access the following:  
Video Share: allows you to send the video clip via Video Share.  
Send via: allows you to send the video clip via a multimedia message  
or via a Bluetooth device.  
Display Mode: allows you to select Full Screen, Full Screen in Ratio, or  
Original Size to view your video.  
Properties: allows you to view the properties for this video file.  
Full-Screen View  
the full-screen option while the video is playing. Press the Normal View  
icon ( ) to return to Normal View.  
(
): allows you to change the display mode to  
Camera  
89  
Section 10: Mobile Video  
Your phone is equipped with a WAP (Wireless Application  
Protocol) browser which allows you to access the Internet and  
download media files directly to your phone. These media files  
are displayed using the built-in Media Player. Mobile Video is a  
media service which allows you to stream media content  
(Weather, News, Sports highlights, etc.) directly to your phone.  
• Help: provides basic on-line assistance which answers most of the  
common issues users come across while using this feature.  
2. Select from one of the available categories by touching an  
option.  
Viewing a Video Clip  
1. In Idle mode, touch  
Mobile Video.  
1. In Idle mode, touch  
Mobile Video to launch the  
2. Select the video clip by touching the entry from within the  
default Mobile Video homepage. This homepage provides  
you with access to content categories & settings:  
Favorites section.  
• My Favorites: allows you to choose from recently uploaded video  
clips from media providers such as CNN, ESPN, HBO Mobile  
Preview, and NBC.  
3. After the stream has been buffered into memory, you can  
choose to either pause or play the content.  
Touch the Pause/Play button to toggle between the two functions.  
• Video Categories: provides some general content categories from  
which to begin searching for media: Entertainment, Sports, News &  
Weather, Music, Kids & Cartoons & HBO Mobile.  
Touch the Exit button to be taken back to the Mobile Video  
homepage.  
• Customize CV: allows you to access the Mobile Video Settings  
menu where you can configure most of the settings associated with  
Mobile Video.  
Using the Video Categories  
This grouping of media categories provides access to an  
additional listing of streaming media. Where the previous  
Favorites list of media stream can be user edited and updated,  
this list of categories is defined by Mobile Video’s homepage and  
cannot be changed.  
• Parental Controls: provides you with settings which can be  
configured to restrict certain media content from being displayed on  
the phone.  
• MEdia Net: exits from the Mobile Video application and launches  
the MEdia Net homepage.  
90  
           
2. Touch the red circle next to any of the available alert  
services listed within the Add to My Alerts section of the  
page (ex: Breaking News).  
Customizing Mobile Video  
Updating the Favorites List  
The list of media providers which appear in the Favorites section  
of the Mobile Video homepage can be edited and changed by the  
user.  
My Purchases  
The CV homepage can be used to shop for streaming multimedia  
content. The My Purchases section can help keep track of your  
purchase history and view any new resale products.  
1. In Idle mode, touch  
Mobile Video Customize  
CV Edit My Favorites. The screen is composed of two  
sections:  
1. In Idle mode, touch  
Mobile Video Customize  
Manage My Favorites: lists the current Favorites list and gives you  
the option of opening the page or deleting it from your Favorites.  
CV My Purchases  
Purchase History. This provides you  
with an on screen listing of your “to date” purchase history  
for media content.  
Add to Favorites: selecting an item moves it to the Favorites list.  
2. Do one of the following:  
2. Touch My Account. This provides you with an onscreen  
Touch  
Touch  
Touch  
to delete a Favorite.  
to open a Favorite.  
to move an item to the Favorites.  
description of your account details.  
Parental Controls  
Your phone can be configured to block both purchased and  
streamed media content. Before filtering, you must first establish  
a pin/password and a contact e-mail address. Once those have  
been established, you can the two available filter options:  
Adding a Video Alert  
When new media is available for upload to your phone (such as  
breaking news), you can set your phone to notify you of the new  
available content.  
Content Filters: let you restrict access to inappropriate content both  
1. In Idle mode, touch  
Mobile Video Customize  
on and outside of MEdia Net.  
CV My Video Alerts Add to My Alerts  
.
Mobile Video  
91  
           
Purchase Blocker: lets you restrict the ability to buy ringtones,  
downloads, games, etc., from MEdia Net on this phone.  
Setting up Parental Controls  
1. In Idle mode, touch  
Mobile Video Customize  
CV Parental Controls to access the MEdia Net parental  
setup fields.  
2. Touch each of the following fields and use the onscreen  
keypad/keyboard to enter the information: PIN  
,
Re-enter,  
contact email address  
.
3. Touch Save and allow a few minutes for your information to  
be received and accepted by MEdia Net. You can then use  
this information to activate the parental filters.  
Configuring the Filters  
1. In Idle mode, touch  
Mobile Video Customize  
CV Content Filters On button to toggle the On/Off  
state.  
2. Touch Purchase Blocker On button to toggle the On/Off  
state.  
3. Touch OK to activate the filter.  
92  
   
Section 11: Messaging  
This section describes how to send or receive different types of  
messages. It also includes the features and functionality  
associated with messaging.  
Messaging icons are displayed at the top of the screen and  
indicate when messages are received and their type. For more  
information, refer to “Icons” on page 14.  
Types of Messages  
Creating and Sending Messages  
1. From the Idle screen, touch Message  
(
).  
Your phone provides the following message types:  
Text Messages  
– or –  
Multimedia (Picture and Video) Messages  
IM Messages  
Touch  
Messaging  
Create Message.  
2. Select a recipient by selecting an entry method by  
touching Tap to Add Recipient and then selecting an  
associated option:  
Mobile Email  
The Short Message Service (SMS) lets you send and receive text  
messages to and from other mobile phones or email addresses.  
To use this feature, you may need to subscribe to your service  
provider’s message service.  
• Enter Number: to manually enter a destination using a valid cellular  
phone number.  
• Enter Email: to manually enter a destination using a valid email  
The Multimedia Messaging Service (MMS) lets you send and  
receive multimedia messages (such as picture messages and  
video messages) to and from other mobile phones or email  
addresses. To use this feature, you may need to subscribe to  
your service provider’s multimedia message service.  
address.  
• Contacts: to select a recipient from your Contacts list (valid entries  
must have a wireless phone number or email address).  
• Recent Contacts: to select a recipient from a list of recently sent  
messages.  
Important!: When creating a message, adding an image, a sound file, or a  
video clip to a text message changes the message from a text  
message to a multimedia message.  
• Group: to select a recipient from the Group list.  
Messaging  
93  
         
Take Picture: allows you to temporarily exit the message, take a  
Note: If the number of recipients are less than 10, all members in the group  
will be added. You will need to delete any unnecessary members in the  
list by selecting the trash can icon and deleting unwanted entries.  
photo with phone’s camera, and then add it to your message by  
touching OK  
.
• Record Video: allows you to temporarily exit the message, record a  
video clip using the phone’s camera, and then add it to your  
Note: Enter additional recipients by separating each entry with a semicolon  
message by touching OK  
.
• Record Audio: allows you to temporarily exit the message, record  
an audio clip using the phone’s microphone, and then add it to your  
3. Touch the empty onscreen text field and use the keypad to  
message by touching Add  
.
enter a message. For more information, refer to “Entering  
• Favorite URL: allows you to temporarily exit the message, access  
your Favorites list then select those URLs you would like to add to  
Text” on page 34.  
the current message by touching Add  
• Contact Info: allows you to choose an existing Address Book entry,  
then add it to your message by touching Insert  
.
Send  
4. Review your message and touch  
.
Additional Message Options  
1. While composing your message, touch  
additional insert options.  
.
Insert  
to reveal  
More  
2. Touch  
to reveal additional options:  
• Preview: allows you to preview your current message before  
delivery (multimedia messages only).  
• Picture: allows you to choose an existing image from the Pictures  
list, then add it to your message by touching Add  
.
• Slide Options: allows you to add more pages to the current  
message. Options include: Add Slide, Delete Slide, or Edit Style  
(multimedia messages only).  
• Video: allows you to choose an existing video from the Videos list,  
then add it to your message by touching Add  
.
• Attach Files: allows you to add attachments to your message. The  
following options are available:  
• Audio: allows you to choose an existing audio file from the Audio  
list, then add it to your message by touching Add  
.
File: allows you to insert an audio, graphic, or video clip to your  
message as an attached file.  
Templates: allows you to insert one of the preset message  
templates to the text (for example, “Where is the meeting?”).  
Business Card: allows you to insert the contact information for an  
entry from Address Book directly to your message as an attached file.  
94  
 
Send  
Event: allows you to insert an Event entry from your calendar directly to  
your message as an attached file.  
4. Touch  
recipients.  
to deliver the message to the selected  
Tasks: allows you to insert a Task entry from your Tasks directly to your  
message as an attached file.  
Attaching Business Card to a Message  
Memo: allows you to insert a pre-saved Memo (text) directly to your  
message as an attached file.  
To attach your Business Card to an outgoing message, follow  
these steps:  
Favorite URL: allows you to insert a URL address from your web  
favorites list.  
1. Touch  
Address Book  
Address Book Settings  
My Business Card  
.
• Add Subject/Remove Subject: allows you to either add or delete a  
subject field to the new message (multimedia messages only).  
2. Create your Business Card by entering the information that  
• Save to Drafts: saves the current message to the Drafts folder.  
you want (this must only be done once).  
• Save as Template: allows you to save the message as a template  
so you can use it again later.  
3. Touch More  
Send Business Card via  
Message.  
OK  
• Delivery Options: allows you to configure the options associated  
4. Enter your message and touch  
.
with sending the message.  
Send  
5. Add recipient(s) and touch  
.
• Request Reports: allows you to be alerted when the message is  
received and when it is read (text messages only). When the Report  
option is checked, the text message will be changed to a  
Viewing New Received Messages  
1. In Idle mode, new messages are indicated by icons and a  
New Messages pop-up.  
3. When you have finished composing your message, touch  
Send to and confirm the recipient(s). For more  
information, refer to “Creating and Sending Messages” on  
page 93.  
2. Touch the View button from the New Messages pop-up.  
Note: If you accidentally exit from this notification screen, you will need to go  
to Menu  
Messaging  
Inbox to access your messages.  
Messaging  
95  
     
3. Touch a message you wish to view. The selected message  
Sent: stores a copy of the messages you sent.  
Outbox: contains messages until they are sent and then the message  
no longer displays in this box but instead displays in the Sent box.  
Drafts: stores unsent messages that you want to edit or send later.  
appears in the display.  
Tip: When viewing a text message, press the Up or Down volume keys to  
increase or decrease the font size of the message text. Six different font  
sizes are available.  
With the list of current message displayed onscreen, use any  
of the following menu options:  
4. To play a multimedia message, touch  
.
• List by: sort the current list based on one of the following criteria  
(criteria will be different depending on the type of message):  
To pause playback of the multimedia message, touch  
To stop playback of the multimedia message, touch Stop  
.
Date, Sender, Type, Subject, Size, or Lock/Unlock status.  
.
• Delete: deletes either a single or multiple set of messages. Touch  
an entry from the list to place a checkmark alongside the entry and  
mark it for deletion. Touch Delete to complete the process.  
5. To scroll through the message (if additional text pages  
have been added), touch the screen and in a single motion,  
scroll up or down the onscreen page.  
With a message open for reading, use any of the following  
menu options:  
6. When you have finished, press  
.
• Reply (to): allows you to compose and send a reply to the  
message. This option reads Reply (when replying to an SMS [Text]  
message), and Reply to (when replying to an MMS [Multimedia]  
message).  
Note: Messages can also be accessed by navigating to your Inbox (Menu  
Messaging Inbox).  
Using Message Options  
• Delete: deletes the current message.  
Message options at the Inbox level differ according to the  
message type, what you have done with the message, and  
whether you are viewing the message. Some of the main  
message category types include:  
• More: provides these additional message functions:  
Forward: allows you to forward the message.  
Save to Address Book: allows you to save the recipient or sender’s  
information from the message to your Address Book as either a New or  
Inbox: stores any incoming message (text or multimedia).  
96  
   
Updated entry. For more information, refer to “Understanding Your  
Address Book” on page 64.  
3. Touch Sign Up to accept the Terms of Agreement.  
4. Touch both the ID and Password fields, then use your  
onscreen keyboard/keypad to enter the account  
information (for example, “silverfox2”), and touch Sign In  
You will be connected to your account's Inbox and  
contacts, where you can send and receive email.  
Move to Phone/Move to SIM card: If a message is stored in the SIM  
card, it is saved to the phone’s memory. If a message is stored in the  
phone’s memory, it is then saved to the SIM card. This option only  
appears for text messages.  
.
Save as Template: allows you to save message content as a template.  
Save Attachment: allows you save any selected attachments. If the  
filename matches one you already have in your folder, you are prompted  
to rename the filename. This option only appears for multimedia  
messages.  
5. Follow any remaining onscreen instructions to complete  
the process.  
Properties: allows you to see properties of a message such as  
Date, From, To, Size, Priority, Delivery Report, and Read Report. This  
option only appears for multimedia messages.  
Using Instant Messaging (IM)  
Instant Messaging allows you to send and receive instant  
messages using AIM, Windows Live, and Yahoo! communities.  
®
Lock/Unlock: allows you to secure a selected message by  
protecting it from accidental alterations. This option only appears for  
text or multimedia messages that are saved in phone memory.  
Note: Before using this feature, you need to subscribe to a messaging  
service. For further details, contact your service provider.  
Using Mobile Email  
Signing into Your IM Account  
Take your email with you! With Mobile Email you can check your  
®
®
®
Yahoo! Mail, AOL , AIM, Windows Live Hotmail, AT&T Yahoo!  
Gmail, and other providers quickly and easily.  
,
Although each account type differs, the initial sign in procedure is  
common to all supported types. Before beginning the sign in  
procedure, you must complete the previous procedures for  
selecting your default IM Community to which you are  
subscribed.  
Signing into Your Mobile Email  
To sign into your Mobile Email, follow these steps:  
1. Touch  
Messaging  
Mobile Email.  
1. Touch  
Messaging  
IM.  
2. Touch an Email carrier of your choice.  
Messaging  
97  
                     
2. Touch an IM client of your choice (AIM, Windows Live, or  
messages. You can delete the messages in each message  
folder(s) either individually or all at one time. Another option is to  
delete messages from all categories at once.  
Yahoo!).  
3. Touch New Account and then touch the available fields to  
enter your information such as Screen Name, Email  
Address, or Yahoo! ID, and Password. Select any additional  
fields.  
Deleting Messages within a Folder  
1. Touch  
Messaging.  
2. Select a message folder (Inbox  
,
Sent, Outbox, or Drafts). A  
list of messages in the folder appears in the display.  
4. Touch Sign In to continue.  
3. Touch Delete and touch an entry to mark it for selection  
After selecting an Instant Messaging service and signing in, you  
can choose from the following options:  
with a checkmark.  
4. Touch either an individual message or Select All to place a  
• Refresh List: updates and displays the IM contact information.  
checkmark alongside all entries in the list.  
• Add Contact: allows you to add an IM contact to the list.  
• More  
:
5. Touch Delete  
.
Settings: allows you to change your Community settings.  
Delete All Messages  
Messaging  
Send Msg to: allows you to send a message to a selected contact.  
1. Touch  
Delete by Folder  
.
Saved Conversations: shows permanent records of your Instant  
Messaging conversations.  
2. Touch either a single category (Inbox, Sent, Outbox, or  
Drafts) or touch All to place a checkmark alongside all  
entries.  
Minimize: minimizes the IM window.  
Sign Out: allows you to log off or disconnect from this IM session.  
Deleting Messages  
When your phone’s memory is full, an error message displays  
notifying you that you cannot receive any new messages. Use the  
Delete option erase obsolete messages, freeing memory for new  
Delete  
3. Touch  
.
4. At the “Locked Messages” pop-up, touch Yes or Cancel to  
discontinue the process.  
98  
 
Save  
2. Touch Keep a Copy and touch  
to store a local copy  
Messaging Settings  
of all outgoing text messages.  
To configure the settings for text messages, multimedia  
messages, Voice mails, and Push messages.  
Configuring the Text Message Center  
1. From Messaging Settings page, touch Text Message  
Touch  
Settings  
Applications Settings  
Messaging.  
Text  
Configuring Auto Delete Inbox Settings  
Message Center. These settings allow you to set the default  
method of text message transmission used by the Text  
Message Center.  
When you select the Auto Delete Inbox option, inbox messages  
will be deleted automatically without a warning message.  
1. From Messaging Settings page, touch Auto Delete Inbox  
2. Touch one of the available setting fields:.  
• Off: Messages will not be deleted automatically.  
.
2. Touch one of the available setting fields and make the  
necessary updates.  
• SMS Settings: allows you to configure the Text message delivery  
parameters when sending Text messages.  
• 1 Week Old: Read messages more than one week old will be  
deleted automatically.  
• Email Settings: allows you to configure the Email parameters when  
sending this type of message.  
• 2 Weeks Old: Read messages more than two weeks old will be  
deleted automatically.  
• Empty: allows you to configure a new Text Message Center profile  
for use when sending this type of message.  
• The Oldest when Full: The oldest message will be deleted  
automatically when the Inbox is full.  
Note: It is recommended that you do not alter these fields without assistance  
Save  
3. Touch  
to store the selected option.  
from a customer service representative.  
Configuring Text Message Settings  
Save  
3. Touch  
to store your settings.  
1. From Messaging Settings page, touch Text Message  
Delivery Options  
Configuring Multimedia Message Settings  
1. From Messaging Settings page, touch Multimedia  
.
Message  
.
Messaging  
99  
   
Send Read Report: when this option is enabled, your phone sends a  
notification back to the recipient indicating that your message has been  
received.  
2. Touch an available field and make the necessary updates.  
• Delivery Options: to configure the parameters associated with the  
delivery of the multimedia message such as:  
Reject Anonymous: allows you to automatically reject messages with  
Priority: you can select the priority level of your messages.  
Expiration: select the length of time you wish the message you sent to  
Reject Advertisement: allows you to automatically reject messages  
with a category of advertisement.  
remain on the Multimedia message server.  
Delivery Time: you can set a time delay before the phone sends your  
messages.  
• MMS Profiles: to configure you Network parameters (For more  
information, refer to “Changing the WAP Profiles” on  
page 128.)  
Message Size: you can set the maximum allowed size (30/100/300/  
600 KB) for a multimedia message.  
• Auto Resize Image: to configure the size limits of the images  
added to new picture messages. Images larger then your setting,  
will be resized to meet this value. Options include: No Resize, 100  
KB, 300 KB, or 600 KB.  
Get Delivery Report: when this option is enabled, the network informs  
you whether or not your message has been delivered.  
Get Read Report: when this option is enabled, your phone requests a  
reply along with your message to the recipient.  
• Creation Mode: provide you with editing and formatting tools.  
Choose from: Free, Warning, or Restricted.  
Keep a Copy: you specify whether you want to keep a copy of the sent  
messages on your phone.  
• Default Style: assigns the “look and feel” for the multimedia  
message screen with parameters such as: Background Color, Font  
Color (for text), Font Style, and Slide Duration (during playback).  
Add My Business Card: you send your content information along with  
your sent messages.  
• Receiving Options: to configure the parameters associated  
received multimedia messages such as:  
Save  
3. Touch  
to store each new settings.  
Configuring Voice Mail Settings  
Download Type: allows you to set the message receipt options.  
Choose from Auto Download, Manual, or Reject.  
There may be times when the voice mail access number might  
need to be changed. If this is necessary, please obtain the  
information from your service provider’s Customer Service  
Department.  
Send Delivery Report: when this option is enabled, the phone allows  
the network report to the sender whether or not the message has been  
received.  
100  
Configuring Push Message Settings  
Note: It is recommended that you do not alter these fields without assistance  
from a customer service representative.  
A Push Message is a method for your service provider to deliver  
content (e.g. images, ringtones, software upgrades, information,  
etc.) to mobile phones that are WAP enabled. You cannot initiate  
or reply to WAP Push Messages. Examples may be firmware  
updates or emergency notifications.  
1. From Messaging Settings page, touch Voice Mail  
.
2. Touch the Voicemail field and use your onscreen  
keypad/keyboard to enter the new Name and Center  
Address (voicemail phone number).  
1. From Messaging Settings page, touch Push Message  
.
2. From the Receiving Options field touch On (activate) or Off  
• Name: allows you to create a new descriptive name for this access  
number.  
(deactivate) to toggle the state of this feature.  
• Center Address: allows you edit the existing number and create a  
new number for use when accessing the remote voicemail.  
Templates  
Besides entering text in your message by using the keypad keys,  
you can speed message composition by including copies of  
stored text into your message.  
Save  
3. Touch  
to store this new information.  
Configuring Broadcast Message Settings (SIM Card  
Dependent)  
Creating Text Templates  
This network service allows you to receive text messages on  
various topics, such as the weather or traffic.  
1. Touch  
Messaging  
Note: Please contact AT&T customer service for further details.  
2. Touch the empty onscreen text field and use the keypad to  
enter a message. For more information, refer to “Entering  
Text” on page 34.  
1. From Messaging Settings page, touch Broadcast Message  
.
Save  
2. Touch  
to store this new information.  
3. Touch Save to store the text to the Text Template folder.  
Messaging  
101  
   
Creating Multimedia Templates  
Messaging  
2. Touch a particular folder for review or both size and  
contents within the selected folder.  
1. Touch  
3. When you have finished, press  
.
2. Touch the empty onscreen text field and use the keypad to  
enter a message. For more information, refer to “Entering  
Text” on page 34.  
3. Touch OK  
.
4. Touch Insert to place a picture, video, or audio file into the  
message.  
5. Touch Add to include the selected picture, video, or audio  
into the template.  
6. Touch More  
Save as Template.  
Used Space  
You can check the amount of the memory being used and the  
memory remaining for Multimedia, Text, Push, and Configuration  
Messages. The display shows the total space including the used  
and free space. You can also view how much space is currently  
occupied by each message box.  
1. Touch  
Messaging  
Used Space.  
102  
   
Section 12: Games & Applications  
Games  
Note: Service charges and subscription purchase may be required.  
The Games menu option allows you to access games that are on  
the phone and also shop for games using AppCenter. You can  
download new games and then save them to the Games folder.  
For more information, refer to “AppCenter” on page 106.  
Applications  
1. Touch  
My Stuff  
Games.  
The Applications menu option allows you to access applications  
that are on the phone and also shop applications using  
AppCenter. You can download applications and then save them to  
the Applications folder.  
2. From the Games menu, touch a pre-installed application or  
touch Shop Games  
.
• Diner Dash 2  
1. Touch  
2. From the Applications menu, touch a pre-installed  
application or touch Shop Applications  
My Stuff  
Applications.  
• Ms. PAC-MAN by Namco  
Tetris  
.
• UNO  
• Browser: allows you to access the internet using att.home.  
3. Follow the on-screen instructions.  
• AppCenter: The AppCenter allows you to shop for Ringtones,  
Games, Cool Tools/Apps, Videos, Color Graphics, Answer Tones,  
and Multimedia using the built-in browser. You can also access the  
MEdia Home site.  
Shop Games  
1. Touch  
AppCenter.  
Games Shop Games to launch  
AT&T Navigator: is a JAVA based driving aid that uses GPS  
navigation.  
2. Follow the onscreen options. The file is downloaded and  
stored in the Games folder.  
AT&T Social Net: is a single mobile application with a live  
connection to your favorite social networks such as Facebook,  
Twitter, Myspace, and the News.  
Games & Applications  
103  
                 
• Make-UR-Tones: The Make-UR-Tones application allows  
you to create customized ringtones from full-track  
songs.  
Service data for your immediate location, your travel destination, or  
virtually anywhere else in the continental U.S.  
• WHERE: is a downloadable mobile application that uses your  
current location (obtained via the built-in GPS) to help you find  
places of interest, things to do, and local information while you’re  
on the go.  
• Mobile Banking: You can access your banking information on your  
device. Mobile Banking allows you to view balances, perform  
transfers, view account history and pay bills directly from your  
mobile phone. Partner banks include: Citi, Chase, Wachovia,  
SunTrust, USAA, Regions, Arvest, Synovus, America First,  
BancorpSouth, Bank Caroline, 1st Bank, Carolina First, and  
Mercantile Bank.  
• WikiMobile: With WikiMobile, you gain access to all 2 million  
Wikipedia articles, including pictures and quick facts. Bookmark  
your favorites for quick and easy tracking. Being a walking  
encyclopedia is now at your fingertips.  
• Mobile Email: Take your email with you! With Mobile Email you can  
check your Yahoo!® Mail, AOL®, AIM, Windows Live Hotmail,  
AT&T Yahoo!®, Gmail, and other providers quickly and easily.  
• XM Radio: This service allows you to stream approximately 25  
channels of commercial-free music through your handset.  
Yellowpages: The Yellowpages Mobile application provides quick  
and ready access to businesses, map locations, and storage of  
your favorite searches (My Place). This application allows you to tap  
into local businesses, locations, and events, connecting you to your  
search in real-time.  
• Mobile Web: Your phone is equipped with att.net, your access to  
the mobile web.  
• MobiTV: This is a subscription service that allows you to watch your  
favorite TV shows using your handset.  
• MobiVJ  
:
This is a subscription service that allows you to watch  
3. Follow the on-screen instructions.  
unlimited music videos using your handset.  
• MusicID 2: This is an application which uses the onboard  
microphone to analyze a music sample and then identify the song.  
Once the application completes the analysis of the song sample, it  
then provides you with the name of the song, artist and album art  
as well as opportunities to buy related content.  
• My-Cast Weather: This is a user-friendly application which runs on  
your mobile phone giving you access to all the weather information  
you need. You can check current and predicted National Weather  
104  
                       
Shop Applications  
1. Touch  
Applications Shop Applications to  
launch AppCenter.  
2. Follow the onscreen options to purchase the new  
application. The file is downloaded and stored in the  
Applications folder.  
3. To access a new application, touch the entry from the  
Note: Service charges and subscription purchase may be required.  
For more information, refer to “AppCenter” on page 106.  
Games & Applications  
105  
 
Section 13: AppCenter  
The AppCenter allows you to shop for Ringtones, Games, Cool  
Tools/Apps, Videos, Color Graphics, Answer Tones, and  
Multimedia using the built-in browser. You can also access the  
MEdia Home site.  
AppCenter Home  
My MEdia Club  
AppCenter Account  
Recently Viewed  
Exit  
Touch  
AppCenter. This then launches the AppCenter  
application.  
4. Find the item you want to download and follow the  
Downloading Multimedia Files  
onscreen instructions to purchase it.  
You can buy a variety of multimedia files, such as ringtones,  
graphics, applications, Multimedia content, and so on from  
AppCenter. Your phone has embedded links to the web sites  
providing you with download services, preset by your service  
provider.  
Ringtones  
This option allows you to shop for ringtones using the built-in  
browser.  
1. Touch  
AppCenter  
Ringtones. You may have to  
touch an onscreen entry twice, once to select it and a  
second time to navigate to that page.  
1. Touch  
2. Touch an onscreen entry such as: Ringtones  
Videos Color Graphics Answer Tones, or Multimedia Store  
To access the homepage for the online shopping mall, touch MEdia  
AppCenter.  
,
Games,  
2. Follow the on-screen options. Purchase options include:  
Answer Tones, Full Track Music, Voice Tones, and Sound  
Effects.  
,
,
.
3. Touch the onscreen Options button to also access the  
following options. For more information, refer to  
“AppCenter Options” on page 108.  
Games  
This option allows you to shop for games using the built-in  
browser.  
106  
             
1. Touch  
AppCenter  
Games. You may have to  
2. Follow the on-screen options to purchase a color graphic.  
touch an onscreen entry twice, once to select it and a  
second time to navigate to that page.  
Answer Tones  
This menu option allows you to shop for answer tones using the  
built-in browser.  
2. Follow the on-screen options to purchase games for your  
1. Touch  
AppCenter  
Answer Tones. You may have  
phone.  
to touch an onscreen entry twice, once to select it and a  
second time to navigate to that page.  
Videos  
This option allows you to shop for videos using the built-in  
browser.  
2. If prompted to accept a redirection, touch Ok  
.
1. Touch  
AppCenter  
Videos. You may have to  
3. Follow the on-screen options to purchase an answer tone.  
touch an onscreen entry twice, once to select it and a  
second time to navigate to that page.  
Multimedia Store  
This menu option allows you to shop for multimedia files (videos)  
using the built-in browser.  
2. Follow the on-screen options to purchase videos for your  
phone.  
1. Touch  
AppCenter  
Multimedia Store. You may  
have to touch an onscreen entry twice, once to select it  
and a second time to navigate to that page.  
Color Graphics  
This menu option allows you to shop for graphic images using  
the built-in browser. You can download new images to your  
Pictures folder.  
2. When prompted to confirm that you want to “Open Link in  
Browser? This link will take you out of AppCenter.  
1. Touch  
AppCenter  
Color Graphics. You may have  
Continue?” touch Ok  
.
to touch an onscreen entry twice, once to select it and a  
second time to navigate to that page.  
3. Follow the on-screen options to purchase multimedia  
content.  
AppCenter  
107  
             
AppCenter Options  
The onscreen Options button (visible from the main AppCenter  
homepage). The following options appear:  
MEdia Mall Home: takes you back to the AppCenter home screen.  
MyMEdia Club: enables you to join the MyMEdia Club, where you can  
earn credits to be used for tones, graphics, and games in the AT&T  
AppCenter.  
Note: A monthly charge is applied for MyMEdia membership.  
MEdia Mall Account: shows a history of your AppCenter account.  
Recently Viewed: shows the most recently viewed ringtones, games,  
videos, graphics, and answer tones.  
Exit: takes you back to the Main menu.  
108  
   
Section 14: AT&T Music  
AT&T Music provides you access to Streaming Music, Music  
Videos, Music communities, Music applications, and allows you  
to both identify and purchase music directly from your handset.  
to activate their features:  
Shuffle mode button:  
Shuffle On: the current list of songs are  
randomly shuffled for playback.  
Music Player  
The Music Player is an application that can play music files. The  
music player supports files with extensions AAC, AAC+, eAAC+,  
MP3, WMA, 3GP, MP4, and M4A. Launching the Music Player  
allows you to navigate through your music library, play songs,  
and create playlists (music files bigger than 300 KB are  
displayed).  
Shuffle Off: songs play in order and are not  
shuffled.  
Equalizer button:  
Equalizer presets include: NORMAL, ROCK, POP,  
DANCE, CLASSICAL, JAZZ, WIDE, DYNAMIC, and  
SURROUND.Thea797isusingtheSRSsolution.  
WIDE=WOWHD(Voice), andDYNAMIC=WOWHD.  
NORM  
Using the Music Player  
1. Touch  
AT&T Music  
Music Player  
.
Repeat button:  
2. Touch a library category (All Music, Artist, Album, or  
Playlists) to view the available music files. Or, touch Shop  
Music to purchase music online.  
Repeat one: repeats the currently playing  
song.  
Repeat all: replays the current list when the  
list ends.  
3. Scroll through the list of songs and touch an entry to begin  
Play All: plays the current song list once.  
playback.  
Music Player Functions  
Touch any of the following on-screen buttons during playback  
AT&T Music  
109  
                           
Properties: allows you to view details for the current song such as  
Plays the previous song.  
Name, Format, Size, Forwarding, Date created, and Location.  
Touch and hold to rewind current song.  
Adding Music to your Handset  
Music files (ringtones and full tracks) can be added to your  
handset by using one or more of the following methods:  
Touch once to play the current song.  
Touch once to pause the current song.  
Purchase and download music and ringtones directly to your handset  
over your wireless carrier’s network by using the AT&T Music – Shop  
Music feature (also accessible from My Stuff).  
Advances to the next song.  
Note: Audio files smaller than 300 KB are treated as ringtones, whereas  
audio files larger than 300 KB are stored in the Music Folder. To listen  
to music smaller than 300 KB, go to Menu My Stuff Audio ➔  
Tones. You can not assign an MP3 file larger than 300 KB as a  
ringtone.  
Touch and hold to fast-forward current song.  
Touch the player menu options at the bottom of the screen to  
reveal additional menu functions:  
Transfer music files from a personal computer using a media player  
TM  
application and an optional USB Data Cable and an optional microSD  
Memory Card.  
Library: displays the Music Player library view (Now Playing, All Music,  
Artist, Album, Playlists, and Shop Music).  
Minimize: reduces the player and leaves it running in the background  
so that you can navigate to other programs or activities.  
More: provides access to options such as:  
Note: When the Bluetooth feature is active on your handset, USB  
communication is not be available.  
To transfer files to your handset, turn off the Bluetooth functionality  
(
Settings  
Connectivity  
Bluetooth). (For more information, refer to  
Add to Playlist: allows you to add the current audio file to a selected  
playlist.  
Send via: allows you to send the current file via a message attachment  
or as a data file delivered to a Bluetooth-capable device.  
Settings: allows you to access the Background Playing Settings menu.  
“Bluetooth” on page 55.)  
Note: The maximum number of songs you can synchronize between your  
phone and your PC is 1000.  
110  
 
3. Verify the pre-insertion of the microSD card into the  
handset. For more information, refer to “Installing the  
Memory Card” on page 6.  
Shop Music  
AT&T Music can be used to shop for ringtones, Answer Tones™  
and songs from some of your favorite music stores.  
1. Touch  
The Shop Music web page is displayed.  
2. Select your music store of choice (or select Ringtones).  
AT&T Music  
Music Player  
Shop Music.  
4. Use the USB adapter cable to connect the handset to the  
target PC. When an active connection has been  
established, a USB icon (  
) appears on the phone.  
3. From the Categories listing, select the desired entry. Touch  
Note: If the target computer does not detect the newly connected handset or  
provide an MTP Player dialog window on the PC screen, please follow  
steps 6 - 9.  
to return to the previous page.  
4. Exit the browser at any time by pressing  
.
5. Touch  
Settings  
Connectivity  
Select USB Mode  
Transferring Music from the Digital Music Stores  
Mass Storage. For more information, refer to  
In order to download music from the computer to your handset, a  
microSD card and USB data cable are required. These items are  
“Configuring Your Phone’s USB Settings” on page 57.  
6. Once the USB connection has been established, the  
handset displays “Connected” and the computer screen  
then shows your device. If the detection occurs, skip to  
step 8.  
.
1. Using your computer, open your preferred Windows Media  
Digital Rights Management (WMDRM) PC music  
management client.  
7. Locate the song on your computer and using your right  
2. Download the selected song to your library.  
mouse button, click Copy  
.
8. Open the Removable Disk drive corresponding to the  
Note: If the music file is protected, Media Player will block the playing or  
synching of that file.  
microSD card location on the phone.  
AT&T Music  
111  
       
9. Open the Music folder (ex:\\Audio\Music) you wish to  
4. Select a song to play within the Music Player.  
upload from the handset.  
Playing Music while Using the Phone  
10. Using your right mouse button, click Paste. This step  
The Music Player allows you to play music in the background  
while performing other tasks on your phone. The music will  
pause when an incoming call is accepted, and the music will  
resume when the call is ended. Music will continue to play when  
you receive a Text Message, Multimedia Message, or an Instant  
Message.  
begins the download process.  
Note: The Music Player does not necessarily support all features of a  
particular file format nor all the variations of those formats. The Music  
Player includes support for Windows Media Digital rights Management  
(WMDRM) which allows you to play some purchased or subscription  
content. Copyright protections may prevent some images, music  
(including ringtones) and other content from being copied, modified,  
transferred or forwarded.  
The other functions you can use are:  
Call: make or receive a call (music player is paused)  
Messaging: send or receive a text or multimedia message. Music  
continues to play unless an audio clip is received as a part of a  
multimedia message.  
Playing Music through a Stereo Bluetooth Device  
Your device supports the Stereo Bluetooth profile (A2DP), and  
Browser: browse the web (music continues to play).  
Music Player: turns on Music Player, or allows you to use full-screen  
controls of the music player.  
1. Pair and connect your handset to a stereo Bluetooth  
device. For more information, refer to “Connecting to Other  
Bluetooth Devices” on page 56.  
Games: lets you play games while listening to music.  
Important!: When you are finished using the Music Player function, you  
2. From the list of compatible devices, select the previously  
paired Bluetooth headset to begin listening to your song  
through the headset.  
must press  
to stop the function to prevent the battery from  
losing its charge. Pausing the player will continue to use the  
battery.  
Music Player Settings  
AT&T Music  
3. Touch  
112  
AT&T Music  
Music Player  
All Music.  
1. Touch  
Music Player  
Settings.  
     
2. Touch On or Off to either activate or deactivate the  
2. Touch a previously created playlist from the list and touch  
Add Tracks  
Background Playing option. This determines whether you  
.
want the music to play in the background while outside of  
3. Touch any available music files to place a checkmark  
alongside their entry (indicating their selection).  
– or –  
the player.  
Save  
3. Touch  
.
Touch All to select all available songs from the list.  
Using Playlists  
Playlists are used to assign songs to a list of preferred media  
which can then be grouped into a list for later playback. These  
Playlists can be created via either the handset’s Music Player  
options menu or from within a 3rd party music application (such  
as Windows Media Player) and then downloaded to the handset.  
4. Touch Add and wait for the songs to be added to the  
current playlist.  
Changing the order of songs in a Playlist  
1. Touch  
2. Touch a previously created playlist.  
3. Touch More Change Order  
AT&T Music  
Music Player  
Playlists.  
Creating a Playlist  
1. Touch  
AT&T Music  
Music Player  
Playlists  
.
Create Playlist  
.
4. Touch and hold one of the songs. The color bar changes  
2. Touch the ivory playlist name field and use the onscreen  
color.  
keyboard to enter a descriptive name for the new playlist.  
5. Drag the song to the new location.  
Save  
OK  
3. Touch  
to complete the creation process.  
Removing songs from a Playlist  
Adding Songs to a Playlist  
AT&T Music  
1. Touch  
2. Touch a previously created playlist from the list and touch  
Remove Tracks  
AT&T Music  
Music Player  
Playlists.  
1. Touch  
Music Player  
Playlists.  
.
AT&T Music  
113  
         
3. Touch any available music files to place a checkmark  
alongside their entry (indicating their selection).  
– or –  
3. Use the USB adapter cable to connect the handset to the  
target PC. When an active connection has been  
established, a USB icon (  
) appears on the phone.  
Touch All to select all available songs from the list for  
4. Once the USB connection has been established, the  
handset displays “Connected” and the computer screen  
then shows your phone.  
removal.  
4. Touch Remove Tracks and wait for the songs to be deleted  
from the current playlist.  
Note: The following steps reflect the procedure used with Windows Media  
Player. If you are using either Napster, or some other form of media  
player, you should refer to that application’s Help files for specific  
directions.  
Transferring Music using a Media Application  
A USB cable, microSD card, and a current version of a media  
®
®
application (such as Napster or Windows Media Player ) are  
required for this procedure.  
1. Open the media player on your personal computer (if you  
are using Windows Media Player, use version 10.0 or  
higher).  
Note: The Napster application can be downloaded at www.napster.com.  
2. Touch  
Select USB Mode  
Mass Storage/Media Player (for MTP). For more  
information, refer to “Configuring Your Phone’s USB  
Settings” on page 57.  
114  
 
5. If this is your first time connecting the a797 to Windows  
Media Player you will need to enter a unique name for this  
phone connection (ex: a797 Card). This assigns a name to  
both the phone (when recognized) and to the internal  
microSD card.  
Note: This upper-right area also indicates the amount of free storage space  
left on the internal microSD.  
Current selected source  
Playlists  
(indicating the internal microSD card)  
Name for microSD storage card  
SGH-A797  
SGH-A797 Card  
-
SGH-A797 Card  
-
SGH-A797  
SGH-A797  
SGH-A797  
SGH-A797  
6. Click Finish to continue onto the application. You will then  
notice the Sync tab active and displaying a connection with  
the phone and displaying the name you created.  
Sync button  
a797 Music  
Library  
7. From within the Windows Media Player application, click  
on the Sync tab. Available songs are then listed on the left  
side of the application.  
AT&T Music  
115  
10. Click on the Library entry (from the left column) and select  
a category to reveal available songs.  
11. Click a song from the center column and drag it into the  
Sync List section of the current page. This then places the  
current song on a “wait list” for update to the target  
location within the phone.  
SGH-A797  
12. Click the Start Sync button (at the bottom of the Sync List)  
to begin uploading the selected songs to your handset. A  
synchronization in progress” message appears on the  
application. Do not unplug the handset during this process.  
Once complete, a Sync Results folder then appears below  
the device entry to indicate sync status.  
SGH-A797  
SGH-A797  
13. It is now safe to unplug the USB connector from the  
handset.  
Sync List  
Importing a Playlist from Windows Media Player  
1. Open Windows Media Player on your computer (version  
10.0 or higher).  
8. If not already active, click the Sync tab.  
9. Choose the destination location for the media files. The  
a797 Card entry (you named) appears in a drop-down list  
on the left side of the screen.  
2. Use the USB adapter cable to connect the handset to the  
target PC. When an active connection has been  
established, a USB icon (  
) appears on the phone.  
116  
 
3. Once the USB connection has been established, the  
handset displays “Connected” and the computer screen  
then shows your phone.  
• Explore: allows you to search for your favorite songs or view the  
most popular songs.  
• Profile: keeps track of the songs you discover. When you find a  
song that you want to remember, save it to your profile so you can  
look at it again later.  
4. If not already active, click the Sync tab.  
• Help: provides more information about using Music ID 2.  
5. Locate the Playlist section (upper-left).  
• EXIT: allows you to exit the application and return to the main AT&T  
Music menu.  
6. Right-click a playlist entry and select Add to ‘Sync List’.  
7. Click the Start Sync button (at the bottom of the Sync List)  
To exit the application at any time, simply press  
.
to begin uploading the selected playlist to your handset.  
Using Identify Song  
8. It is now safe to unplug the USB connector from the  
1. Touch  
AT&T Music  
Music ID  
Identify Song.  
handset.  
2. Place the handset’s microphone up to the source of the  
song, which can be from either a radio, stereo, or headset.  
The handset then begins to analyze the audio signal and  
displays “Recording” then “Analyzing”. If a song match is  
found, the screen displays the Artist Name and Track Title.  
If available, Album cover art, Ringtones, Biography, Full  
Songs, Lyrics, Similar, and Share is displayed.  
MusicID  
MusicID 2 is an application which uses the onboard microphone  
to analyze a music sample and then identify the song. Once the  
application completes the analysis of the song sample, it then  
provides you with the name of the song, artist and album art as  
well as opportunities to buy related content.  
1. Touch  
AT&T Music  
Music ID.  
3. To purchase the song (with ringtone and wallpaper if  
2. Select any of the following options by touching an entry:  
available), touch Full Songs  
.
• Identify Song: begins the analysis of the song being sampled  
through the handset’s microphone.  
AT&T Music  
117  
     
4. The song, or a list of songs is displayed. Touch the song  
and you will be diverted to a website where you can  
purchase the song.  
• Explore: provides information about searching for songs by title,  
artist, or lyrics.  
• Using Your Profile: provides information about using your profile.  
• About MusicID 2: provides information about the MusicID 2  
software version.  
5. To share the song ID with another user, touch Share  
.
6. Touch the 123 button from the bottom of the screen to  
display an alphanumeric keypad. Use these keys to enter  
the recipients phone number. Touch OK once complete.  
Exiting from the Music ID Application  
Exit the application by simply pressing  
Yes.  
XM Radio  
7. To identify another song, touch NEW ID.  
This service allows you to stream approximately 25 channels of  
commercial free music through your handset.  
8. If a song can not be found, the handset displays a “Sorry,  
No Match Try Again!” message. Touch NEW ID and try  
analyzing the song again.  
Note: Since this product uses a large amount of data in its stream process,  
you should note that you are responsible for all data charges incurred.  
It is recommended that you subscribe to a MEdia Max data bundle so  
that you are not charged for data overages.  
To exit the application at any time, simply press  
.
Getting Help with Music ID  
1. Touch  
AT&T Music  
XM Radio.  
1. Touch  
AT&T Music  
Music ID  
Help. The screen  
2. During the initial setup, touch OK to acknowledge the data  
displays a list of helpful topics related to the musicID  
application. These topics cover:  
service usage information and verify your subscription.  
• Getting Started: provides information about Music ID 2 and what  
you need to do to get started.  
Note: This is a paid service, initially you will only be allowed a 10 minute trial  
period before you have to register for the paid service.  
• Features: provides information about Music ID 2 features.  
3. Touch Accept to agree to the terms of the XM Radio service  
and follow the on screen prompts.  
118  
       
4. Select a radio station category from the guide list.  
Note: This service requires a subscription. You will have a trial period, after  
which a fee will be applied.  
5. Select a specific radio channel to start the music  
streaming to your phone.  
1. Touch  
AT&T Music  
Music Videos  
Guide.  
6. Touch Buy to purchase the music content associated to the  
2. From the main Music Video homepage, touch Options.  
selected channel.  
To view Help content and access video player options, select  
from the following:  
Music Videos  
Music Videos provides links to music video channels that are  
organized by music genres.  
Full Screen: enlarges the picture to fill the entire screen.  
Mute: silences the audio in the application.  
Help/Settings: provides information on how to use the application &  
information about Subscriptions, Video, and how to Send to a Friend.  
Exit: exits the Music Videos application.  
1. Touch  
AT&T Music  
Music Videos.  
You are then taken to the MobiVJ Music Videos application.  
2. During the initial setup, touch OK to acknowledge the data  
Viewing a Video Clip  
service usage information and verify your subscription.  
Touch the video clip to begin the streaming playback.  
3. Touch Accept to agree to the terms of the MobiVJ service  
and follow the on screen prompts. A welcome video is then  
displayed.  
After the stream has been buffered into memory, you can choose  
to either Pause or play the content.  
Make-UR-Tones  
The Make-UR-Tones menu allows you to create customized  
ringtones from full-track songs.  
4. Touch a desired video station to view music videos.  
Music Video Options  
1. Touch  
AT&T Music Make-UR-Tones.  
While playing a music video channel, touch Guide to view the  
channel guide listing.  
2. Follow the on-screen options.  
AT&T Music  
119  
           
3. Once you have purchased a song to create your ringtone,  
exit the browser and you will be prompted to edit the  
ringtone.  
4. Follow the on-screen options.  
5. Tap the Get UR Tone banner to download the ringtone to  
your handset.  
Community  
The Community is a place where you can find a listing of various  
fan sites that provide sound clips, wallpapers, bios,  
discographies, and other information about an artist.  
1. Touch  
AT&T Music  
Community.  
2. Select a fan site and follow the onscreen instructions.  
Exit the application by simply pressing  
.
Music Applications  
The Music Applications option accesses the internet to provide  
Music tools for your handset. Services provided on this site may  
include Music ID, MobiRadio, Billboard Mobile Channel, MobiTV,  
Live TV, and MobiTV en Español.  
1. Touch  
AT&T Music  
Music Applications.  
2. Select a music site and follow the onscreen instructions.  
120  
       
Section 15: AT&T GPS  
AT&T GPS provides you with access to real-time GPS-driven  
applications. These programs not only allow you to achieve  
real-time GPS enabled turn-by-turn navigation, but also access  
local searches based on a variety of category parameters. The  
system is also future upgradeable via the purchase of additional  
GPS applications.  
Launching AT&T Navigator  
1. Touch AT&T GPS AT&T Navigator  
2. Read the AT&T Navigator Terms of Use and touch YES to  
.
acknowledge the terms of use. Otherwise, touch Exit  
.
3. Read the Warning disclaimer and touch Agree to  
Global GPS turn-by-turn navigation—mapping and Point of  
Interest content for three continents, including North America  
(U.S., Canada, and Mexico), Western Europe, and China where  
wireless coverage is available from AT&T or its roaming  
providers.  
acknowledge. Otherwise, touch Exit  
.
4. You will be asked if you would like a brief tour of the AT&T  
Navigator features. Touch Yes for a tour or touch No, Skip  
Tour to skip the tour.  
AT&T GPS is a folder on the phone where you can either  
purchase GPS applications or find preloaded GPS applications.  
5. The AT&T Navigator main screen displays.  
Using Navigator  
Although your phone does not come with left and right softkeys,  
these are available as onscreen buttons so you can activate their  
corresponding features.  
AT&T Navigator is a separately licensed product that requires you  
to download the feature to your handset, and accept the license  
agreement before using.  
1. Touch  
AT&T GPS  
AT&T Navigator.  
Important!: You must have a data plan to use this feature.  
2. Select an option and follow the onscreen instructions to  
activate a Navigator features.  
AT&T GPS  
121  
       
• Drive To: lets you get driving directions from wherever you are to  
wherever you’re going. Choices include:  
Note: These services require the purchase of a subscription.  
My Favorites: displays your favorite (marked) GPS navigation sites.  
Recent Places: displays your recently entered locations.  
Address: displays manually entered locations.  
Obtaining Driving Directions  
The a797’s built-in GPS hardware allows you to get real-time  
driving directions to selected locations or establishments based  
on your current location.  
Intersection: used to locate a specific address by using two separate  
street addresses to identify an intersection. These can be entered either  
manually (Type It) or by speaking into the phone (Speak It).  
Using a Physical Address  
City: allows you to enter a city, State and/or Province for navigation.  
1. Touch  
AT&T GPS  
AT&T Navigator  
Drive To  
Businesses: allows you to enter a business type or name, category, or  
location.  
Address  
OK.  
2. Touch either Type It or Speak It  
.
• Search: allows you to search for the address by either speaking it  
or by entering the information manually. This function lets you  
search for locations from options such as: Food/Coffee, Gas  
Stations, Gas By Price, Banks/ATMs, WiFi Spots, Parking Lots  
Hotels & Motels, and Movie Theaters.  
• Type It: requires that you enter the physical address using the  
keypad.  
• Speak It: enables the voice response unit and translates voice to  
text.  
• Maps& Traffic: provides access to 2D and 3D maps for both your  
current location and for several categories of locations such as  
Airports and Contacts.  
3. If typing in the address, touch the following fields and use  
the onscreen alphanumeric keypad to enter the necessary  
information:  
Tools & Extras: provides additional features such as sharing your  
location with contacts, recording your current location, creating and  
storing My Favorites locations, accessing the product tour, setting  
detailed application preferences, and seeing information. about  
your account.  
• Street: used to enter a street address. Touch Done to complete.  
• City: to enter the city for the address. Touch Done to complete.  
• State/Province or ZIP/Postalcode: additional information that can  
provide a more detailed search. Touch Done to complete.  
3. Press  
to return to Idle mode.  
4. Follow both the onscreen and audio directions.  
122  
 
4. The following menu icons appear in the display:  
Shopping for GPS Applications  
1. Touch AT&T GPS Shop GPS Apps.  
• Weather: allows you to check the local weather.  
• News: allows you to check Local News, Top US News, Sports,  
Entertainment, Technology, or Strange News.  
• Movies: allows you to search for local theaters and movies being  
shown.  
• YP.COM: allows you to search the Yellow Pages.  
• My Stuff: allows you to set up My shortcuts and My places.  
• WhereWall: allows you to write on the world wide WHERE wall. You  
must set up an account first.  
• Starbucks: allows you to locate the nearest Starbucks.  
• Gas Prices: allows you research gas pricing in your area.  
2. Follow the onscreen prompts to purchase additional GPS  
Applications.  
Where  
WHERE™ is a downloadable mobile application that uses your  
current location (obtained via the built-in GPS) to help you find  
places of interest, things to do, and local information while you’re  
on the go.  
1. Touch  
AT&T GPS  
Where. A seven-day free trial  
5. Use the navigation keys to select an option and follow the  
period is provided with a notice that if you do not cancel  
within seven days then you will be charged for the GPS  
service.  
onscreen prompts.  
Note: These services require the purchase of a subscription.  
Important!: After the trial period, charges for Where service apply. Contact  
your service provider for details.  
2. Touch OK to accept the Terms of Service.  
3. Touch OK to start.  
Your location will automatically be calculated.  
AT&T GPS  
123  
     
Section 16: Mobile Web  
Your phone is equipped with att.net, your access to the mobile  
web. This section explains how to navigate att.net and introduces  
you to the basic features.  
Local: The Local page allows you to quickly search for Restaurants,  
ATMs, Shopping and other businesses based on your current location.  
You can also view Maps & Traffic, Weather, and Movie Times.  
Popular: The Popular page allows you to access news, social  
networking site, web-based email and other content.  
Accessing the Mobile Web  
To access the Mobile Web browser:  
Browse the Local, Web and Popular screens using the top  
navigation bar. The default is the Web tab.  
When the Idle screen displays, touch  
att.net homepage displays.  
Mobile Web. The  
You can change the way you view the web by checking or  
unchecking the Mobile view option in Options Settings ➔  
Mobile view. When the Mobile view option is unchecked, the  
web format changes to resemble the web as it appears on your  
PC.  
Homepage - att.net  
When you access the Mobile Web, the att.net homepage  
displays.  
The main page has 3 tabs:  
Web: Web is the default page. Web allows you to enter a URL, search  
the web, manage your shortcuts, and access My Account.  
124  
       
Mobile view: allows you to choose how you view the web: Mobile  
Navigating with the Mobile Web  
1. To select an item, touch an entry.  
Web view or HTML web view.  
Landscape mode: changes your display to landscape.  
2. To return to the previous page, touch Back or press  
.
Show overview: when checked, desktop view will appear zoomed  
out after page is loaded. When unchecked, desktop view will appear  
zoomed in.  
3. Press the Options soft key to access the following options:  
Home [0]: returns you to the homepage where you  
started.  
In-line form input: when checked, text will be entered in the  
att.net text entry boxes. When unchecked, the device’s own text entry  
screen will be displayed.  
Enter Address: allows you to enter a URL address.  
24-hour clock: allows you to change between 12-hour and 24-  
hour clock format.  
History: displays a list of the last sites visited. You can  
browse to any of these sites by selecting them in your  
History list.  
Set clock: drop-down menu allows you to set your clock.  
Go to Bookmarks: displays a list of your bookmarked  
sites. You can browse to any of these sites by selecting  
them in your Bookmarks list.  
Clear Cookies: allows you to delete cookies stored by the sites you  
have visited.  
Help: allows you to search for help on using the web.  
Add to Bookmarks: allows you to add a URL to your  
bookmark list. This option does not appear while at the  
home page.  
Exit: allows you to exit the web and return to the Main  
Menu.  
Enter a URL  
You can access a website quickly by entering the URL. Websites  
are optimized for viewing on your phone.  
Reload: reloads the current page.  
Find in Page: allows you to search in the current page.  
Settings: allows you to change the way you view your  
web pages by changing these options:  
To enter a URL and go to a particular website, follow these steps:  
1. Select the Web tab.  
Load images: allows you to choose whether to load images or not.  
Images quality: allows you to adjust from Low, Medium or High.  
Font size: allows you to set font size: Small, Medium, Large or Extra  
Large.  
2. Touch the URL field.  
3. Enter the URL using the QWERTY keypad.  
Mobile Web  
125  
       
Search the Internet  
My Account  
To perform an internet search using keywords, follow these  
steps:  
My Account allows you to manage your account from your  
phone’s browser. You can use it to view your minutes, Internet,  
and messaging usage. You may also be able to see account  
balances, pay your bill, change services, and reset your  
voicemail password.  
1. Select the Web tab.  
2. Touch the Yahoo Search the Internet field.  
3. Enter the keyword(s) to search using the QWERTY keypad.  
1. Select the Web tab.  
4. Touch OK  
.
2. Touch the My Account link.  
3. Touch one of the following items:  
5. A list of search results displays.  
6. Touch a link or press  
to return.  
• Usage & Billing: shows current usage, minutes remaining, and  
date of next billing cycle.  
My Shortcuts  
Shortcuts enable you to access web content quickly. You can  
customize your Shortcuts.  
• Parental Controls: allows you to turn on Content Filters and  
Purchase Blocker.  
• Privacy Policy: shows where to view Privacy Policy.  
• Help: allows you to get help for My Account.  
Using Bookmarks  
While navigating a website with att.net, you can bookmark a site  
to quickly and easily access it at a future time. The URLs (website  
addresses) of the bookmarked sites are stored in the Favorites  
folder, where you can use the 6-preset favorites and store your  
own favorite URLs.  
1. From the Web page, select the content you want to add as  
a Shortcut.  
2. Select Add to My Shortcuts located at the top of the page to  
add the Shortcut to your homepage.  
Tip: Manage Shortcuts allows you to rearrange and delete Shortcuts.  
126  
         
Accessing a Website Using Bookmarks  
1. When the Idle screen displays, touch  
then touch Options Go to Bookmarks.  
Deleting a Bookmark  
1. From the Bookmarks list, touch  
bookmark you want to delete.  
Mobile Web  
,
to the right of the  
2. Touch a bookmark item in the Bookmarks list.  
2. At the Delete? confirmation pop-up, touch OK to continue,  
or Back to cancel.  
Adding Bookmarks  
3. When you have finished, press Done  
.
1. When the Idle screen displays, touch  
Mobile Web.  
Emptying the Cookies  
2. Touch the URL field.  
A cookie is a small file which is placed on your phone by a  
website during navigation. In addition to containing some site-  
specific information, it can also contain some personal  
information (such as a username and password) which can pose  
a security risk if not properly managed. You can clear these  
cookies from your phone at any time.  
3. Enter the URL using the QWERTY keypad.  
4. Touch the Options soft key, then select Add to  
Bookmarks.  
5. Bookmark Added displays at the top of the screen.  
6. When you have finished, press  
or touch Back to  
1. When the Idle screen displays, touch  
2. At the att.net homepage, touch Options Settings.  
3. Touch Clear cookies...  
Mobile Web.  
return to the Main Menu.  
Editing Bookmarks  
.
1. From the Bookmarks list, touch  
bookmark you want to change.  
to the right of the  
4. Touch Yes to confirm and continue, or No to cancel.  
5. The Cookies deleted confirmation is displayed.  
2. Edit the Name of the bookmark.  
3. Touch Save.  
6. When you have finished, touch Back to return to the page  
you were at before or press  
to exit the web.  
4. When you have finished, touch Done  
.
Mobile Web  
127  
           
1. In Idle mode, touch  
Settings Browser  
Settings  
Applications  
Using your History  
The History list provides you with a list of the most recently  
visited websites. These entries can be used to return to  
previously unmarked web pages.  
Browser Profiles.  
2. Touch one of the following profiles:  
• MEdia Net  
AT&T MMS  
AT&T IMS  
1. When the Idle screen displays, touch  
Mobile Web,  
then touch Options History.  
2. Touch an entry from the list to access the site.  
Caution!: The WAPs are pre-configured and can not be altered using this  
screen. If you change the settings without first checking with your  
service provider, the web browser, MMS, and e-mail features may  
not work properly.  
3. Touch Clear to clear the history content.  
4. When you have finished, touch Back to return or press  
to exit from the browser.  
Create  
3. To create a new connection profile, touch  
the onscreen prompts.  
– or –  
and follow  
Changing the WAP Profiles  
Connection can be made via either one of three available  
connection profiles: MEdia Net, AT&T MMS (MultiMedia Server),  
or AT&T IMS. Use this menu to create and customize the profiles  
containing the settings for connecting your phone to the network.  
You need these settings to use the WAP browser or to send MMS  
messages or Email messages.  
To edit an existing profile, touch a profile from list, scroll to  
the desired field, and use the onscreen keypad/keyboard  
to edit the parameter you want to edit:  
• Set Name: enter a profile name.  
Note: Although the active connection can be changed by the user, it is  
recommended that this choice be made with the assistance of either  
the retailer or customer service representative.  
• Access Name: edit the access point name.  
• Auth Type: select the type of authentication used for this WAP  
connection: None, Normal, or Secure.  
• User ID: enter the User ID required to connect to the network.  
128  
         
Traffic Class: select the traffic class.  
• Password: enter the user password required to connect to the  
network.  
OK  
4. Touch  
to exit Advanced Settings.  
• Protocol: set the connection protocol used by the WAP browser:  
WAP or HTTP.  
Save  
5. Touch  
to save these settings.  
The WAP settings may vary depending on the service provider.  
• Home URL: enter the URL address of the page to be used as your  
homepage.  
• Gateway Address: (WAP only) enter the gateway address of the  
proxy server.  
• Proxy Address: (HTTP only) set the proxy server address and port.  
• Secure Connection: (WAP only) determines if the connection will  
follow a secure protocol.  
• Linger Time (sec.): set a time period (in seconds) after which the  
network is disconnected if there has been no new data traffic in that  
time.  
• Advanced Settings: (touch  
) allows you to configure some of  
the IP-specific information: Static IP, Static DNS, Server information,  
and Traffic Class.  
Static IP: specify if you want to manually enter an IP address. If you  
want the IP address to be automatically assigned by the server, remove  
the check mark.  
Local Phone IP: enter the IP address obtained from the network  
operator, if you checked the Static IP option.  
Static DNS: specify if you want to manually enter the Domain Name  
Server (DNS) address. If you want the address to be automatically  
assigned by the server, remove the check mark.  
Server 1/Server 2: enter the Domain Name Server (DNS) addresses.  
Mobile Web  
129  
Section 17: Tools  
The on-board applications (such as camera, camcorder,  
calendar, and alarms) can be supplemented with additional  
applications which can be purchased through the AT&T Mall.  
2. At the voice prompt, say a command. The list of available  
commands is listed below.  
Tools  
Note: This list of voice commands is briefly displayed.  
Tools are feature options that allow you to use your handset for a  
variety of non-phone related activities. To access any of the tools,  
Say a Command Options  
Call <Name or #>: dials a name or number listed in your contact list.  
If multiple numbers exist (i.e. home, work, or other) say the name and  
the number type (location).  
Touch  
My Stuff  
Tools.  
Camera  
Send Message <Name or #>: displays the Create Text Message  
screen.  
For more information, refer to “Camera” on page 82.  
Lookup <Name>: allows you use a voice command to locate and  
display contact information stored in the Contacts list.  
Go To <Menu>: accesses all the features of your phone if they are  
activated, such as: Voice mail, Contacts, Tones, Calendar, Tasks, and  
Browser.  
Voice Recognition  
Nuance Voice Recognition software is an advanced speech  
recognition software used to activate a wide variety of functions  
on your phone. Nuance software automatically voice activates  
(up to 1,000 contacts) for voice dialing and searching. No  
pre-recording or training needed. Speak a contact name  
naturally to dial, and use your voice to look up contacts, launch  
applications and navigate phone menus.  
Check <Item>: lets you check your phone's status in the same report  
(Status, Messages, Missed Calls, Time, Signal strength, Network,  
Battery, My Phone Number, and Volume).  
While the Say a Command screen displays you have two options:  
Tutorial: provides examples of how to use the voice commands.  
1. Touch  
My Stuff  
Tools Voice Recognition.  
130  
           
Settings: lists the settings for voice command software such as:  
Confirmation, Adaptation, Audio Modes, Speakerphone, and About.  
In very noise environments, it may be helpful to use a headset or a  
Bluetooth headset.  
If the phone does not recognize your command the Command not  
recognized screen displays with two options:  
Contacts List Voice Activation  
On startup, Nuance Voice Recognition software reads your  
Contacts list and voice-activates all the names.  
Tutorial: provides instructions on how to use voice commands.  
Restart: touch and try the command options again.  
When you add or change contacts, the software automatically  
reloads and voice-activates the list when you add or modify a  
contact.  
Speak clearly when giving your command. There is no need for  
you to speak slowly or with added emphasis. The voice  
recognition software has been optimized to understand your  
speech in its natural form. If it does not recognize your command  
after a few seconds, a voice prompt asks you to repeat the  
command. If it does not recognize your command again, the  
following message displays “Sorry, no match found,” and voice  
recognition turns off.  
Record Audio  
Record Audio allows you to record voice memos. It also allows  
you to send your audio clip to other people as an attachment of  
an MMS message. Recording time will vary based on the  
available memory within the phone.  
1. Touch  
My Stuff  
Tools Record Audio. For  
You must end your current Voice Commands call before you can  
make another call using Voice Commands. To make a 3-way call,  
only the first call can be made using Voice Commands.  
more information, refer to “Record Audio Settings” on  
page 60.  
Voice Recognition Tips  
2. To start recording, touch  
. Record a memo by  
Wait for the tone before you speak.  
speaking into the microphone.  
Speak clearly and at a normal volume.  
There is no need to use paused speech. The voice recognition software  
has been trained to recognize natural speech, and performs best when  
you speak naturally.  
Tools  
131  
       
3. During the recording process you can either touch Stop  
) to stop the recording or Pause ( ) to  
2. Touch a pre-recorded memo from the list to begin  
(
playback.  
temporarily halt the recording. Once the audio recording  
has stopped, the message is automatically saved.  
3. To exit, press  
or press  
.
Alarms  
4. Once stopped, choose from one of the following options:  
This feature allows you to both set the alarm to ring at a specific  
time.  
• Play: allows you to play the memo.  
• Record: allows you to save the current memo and begin another  
1. Touch  
My Stuff  
Tools  
Alarms  
Tap to  
session.  
Create. The following options display:  
• Delete: allows you to delete the current memo.  
• Name: allows you to use a specific name for the alarm. The name  
will appear on the display when the alarm activates.  
• More: provides these additional functions.  
Send via: allows you to send your voice clip to other people using either  
a message or to a Bluetooth device.  
• Time: use either the Up/Down input arrows or scroll through the  
available fields to set the new time for the event, at which time an  
alarm will sound. Touch Set to save the new values.  
Set as: allows you to set the current memo as a Call Ringtone, a Caller  
Ringtone for a specific entry or an Alarm Tone.  
Note: To change the time format, see “Time & Date” on page 47.  
Properties: displays the Name, Format, Size, etc., of the current voice  
memo.  
• Alarm Repeat: use this option to set the repeating status for the  
alarm by placing a checkmark alongside those days you would like  
to use for the current alarm. Everyday places a checkmark  
alongside all days.  
5. To exit, press  
or press  
.
Recorded Audio Folder  
This folder shows a list of audio clips that have been recorded  
and saved. To access this folder, use the following steps:  
• Snooze: use this option to set a Snooze Duration (5, 10, 15, 20, or  
30 Minutes) and a Snooze Repetition (1, 2, 3, 5, or 10 Times).  
1. Touch  
My Stuff  
Audio  
Recorded Audio.  
• Set Details: allows you modify some additional features:  
132  
       
Alarm Type sets the way in which the alarm sounds when activated  
(Melody, Vibration, Vibration then Melody, and Vibration & Melody).  
Touch  
My Stuff  
Tools  
Calendar. The Calendar is  
displayed.  
Alarm Tone sets the sound file which is played when the alarm is  
activated.  
Note: You an also access your Calendar in Idle mode by pressing  
.
Alarm Volume adjusts the alarm’s volume (1 - 7).  
2. Touch Save to store the alarm details and Save again store  
Creating a New Event  
this new event.  
1. Touch  
Event  
My Stuff  
Tools  
Calendar  
Create  
.
Turning Off an Alarm  
To stop the alarm when it rings, perform one of these steps:  
2. Touch the Title field and use the onscreen keyboard to  
enter a name for this specific event. Touch OK to save the  
new name.  
Locate the slider on the screen and slide it to the right to the  
Stop position.  
– or –  
3. Touch the Start Date field. The Start Date screen displays.  
4. Enter a date with the keypad.  
Press  
.
To activate the Snooze feature:  
5. Touch Set to complete the process.  
Locate the slider on the screen and slide it left to the Snooze  
6. Touch the Start Time field. The Start Time screen displays.  
7. Enter a time with the keypad.  
position.  
Calendar  
8. Touch Set to complete the process.  
The Calendar feature allows you to view the Month, Week, and  
Day layout views. It also shows any Missed Alarm Events that  
have occurred.  
9. Touch the Alarm field and select a time for the alarm to  
begin alerting you of the upcoming event.  
To display your calendar:  
Tools  
133  
       
Choices include: Off, On Time, 30 Minutes Before, 1 Hour Before, 1  
Day Before, 1 Week Before, Customize (your own defined  
schedule).  
Other Event Options  
My Stuff  
2. Touch any of the following options:  
1. Touch  
Tools  
Calendar  
More.  
10. Touch Save to store the new alert time.  
• Go to: allows you to manually select a target date for review by  
using the Go To dialer page. Touch Go to be taken to the dialed-in  
date.  
11. Touch Set Details to configure additional parameters for the  
new event:  
• End Date: enter final date for this event to occur. This is useful if the  
alarm is for a repeating event. Touch Set to store the date.  
• View by Day: allows you to change the Calendar view to display a  
daily event listing.  
• End Time: enter final time for this repeating event. Touch Set to  
store the time.  
• Viewby Week: allows you to change the Calendar view to display a  
weekly event listing.  
• Details: enter a description for this event. Touch OK to store the  
• Delete: allows you to remove an event from your Calendar.  
name.  
• Calendar Settings: allows you to configure the Calendar’s Starting  
Day (select either Sunday or Monday) and View by Mode (select  
Month, Week, or Day).  
• Location: enter a location for this event. Touch OK to store the  
name.  
• Alarm Tone: allows you to choose an alarm tone. Once highlighted,  
navigate to Tones and select an audio file. Touch Add to assign the  
file as your new alert tone.  
• Missed Alarm Events: displays any missed events.  
• Used Space: displays a list of the different Calendar event  
categories along with the memory allocation for each.  
• Repeat: allows you to set the number of repetitions allowed for this  
appointment (Off, Everyday, Every Week, Every Month, or Every  
Year). Once selected, all remaining alarm settings are enabled.  
Touch Save to store the option.  
3. To exit, press  
or press  
.
Viewing an Event  
1. Touch  
My Stuff  
Tools  
Calendar  
Event List.  
• Repeat Until: allows you to set as duration for this appointment by  
assigning an expiration date.  
A listing of all upcoming events is then displayed.  
Save  
Save  
12. Touch  
134  
to store the new event.  
 
2. Touch an event from the Events page to then open that  
The following options are available:  
instance.  
Save: allows you to save your sketch.  
3. To exit, press  
or press  
.
Draw: allows you to draw a sketch. Touch this icon to  
toggle between Draw, Erase, and Fill.  
Deleting an Event  
1. Touch  
Delete  
My Stuff  
Tools  
Calendar  
Event List  
Erase: allows you to erase everywhere that you draw.  
.
2. Touch an individual event from the list or touch All to place  
Fill: allows you to fill in enclosed areas of your sketch.  
a checkmark adjacent to all events.  
3. Touch Delete  
.
LineWidth:allowsyou tosetthreedifferent linewidths  
usedfordrawing.Touchthisicontotogglebetweenthe  
three line widths.  
4. To exit, press  
or press  
.
Recent Calls  
The phone stores the numbers of the calls you’ve dialed,  
received, or missed in the Recent Calls menu. If the number or  
caller is listed in your Address Book, the associated name  
displays.  
Color: allows you to choose between seven different  
colors. Touch the arrow keys to move the color bar.  
Undo:allowsyoutoundothelastcontinuousstrokethat  
you drew on your sketch. You can undo up to your last  
30 strokes.  
For more information, refer to “Recent Calls” on page 26.  
Sketchpad  
3. When you are finished, touch  
to save.  
This option allows you to create sketches.  
4. Enter a File Name for your sketch and touch Save  
.
1. Touch  
My Stuff  
Tools  
Sketchpad  
Draw.  
2. Use the touchscreen to draw a sketch with your finger.  
Tools  
135  
             
• Alarm: allows you to set a time prior to the event where the event  
alerts will begin. Options include Off, On Start Date, On Due Date, 1  
Day Before Starting, 2 Days Before Starting, and1 Week Before  
Starting.  
Memo  
This option allows you to create memos to add to your events.  
1. Touch  
2. Use the onscreen keyboard to enter a new memo and  
OK  
My Stuff  
Tools  
Memo  
Create Memo.  
• Alarm Time: enter a time for this alarm to sound. Touch Set to  
assign the new time.  
touch  
Tasks  
. Your memo is saved.  
• Alarm Tone: allows you to choose an alarm tone. Once selected,  
navigate to Tones, select a file, and touch Add to assign the audio  
file as the current alarm tone.  
This menu option allows you to create a “to do” entry of tasks  
which are created in a similar fashion to previously described  
Calendar entries.  
Save  
Save  
4. Touch  
to store the new task.  
Calculator  
1. Touch  
2. Select any of the following options:  
• Title: enter a title for this task (up to 15 characters).  
My Stuff  
Tools  
Tasks  
Create Task.  
With this feature, you can use the phone as a calculator. The  
calculator provides the basic arithmetic functions; addition,  
subtraction, multiplication, and division.  
1. Touch  
My Stuff  
Tools  
Calculator.  
• Priority: allows you assign the task a priority (High, Medium, or  
Low).  
2. Enter the first number using the onscreen numeric keys.  
• Start Date: enter a date for this task to begin.  
3. Enter the operation for your calculation by touching the  
• Due Date: enter a date for this task to end.  
corresponding onscreen arithmetic function key.  
• Status: allows you assign a current project status (Completed or  
Ongoing).  
4. Enter the second number.  
3. Touch Set Details to access additional options:  
5. To view the result, touch equals (=).  
• Details: enter a detailed description for this task (up to 100  
characters).  
Tip Calculator  
Tip Calculator automatically calculates the following amounts:  
136  
                   
Gratuity (tip)  
Volume  
Individual payment (for groups)  
Area  
Temperature  
Calculations are based on the total amount of the check, a  
selected percentage, and the number of people paying.  
1. Touch  
My Stuff  
Tools  
Converter.  
1. Touch  
My Stuff  
Tools  
Tip Calculator.  
2. Select the specific converter function by touching one of  
2. Touch the Bill field and use the keypad to enter the total  
the above onscreen conversion functions.  
amount of the bill.  
Each converter function has a field for the type of unit to be  
converted, and the type of unit to convert to. An additional field  
allows you to input the unit amount to convert.  
3. If needed, touch the Tip field and use the keypad to  
change the tip percentage.  
3. Enter the main value by touching the first onscreen value  
4. If needed, touch the Split field and use the keypad to  
field (top left of the page).  
change the number of persons that will be splitting the bill.  
4. Use the keypad to enter the necessary value and touch  
5. The amount of the Tip, the bill Total, and the amount each  
OK  
.
person should pay appear in the lower half of the screen.  
5. Touch the drop-down list (upper-right) to then select the  
6. Touch Reset to clear the fields and start over.  
desired source unit. This is the value you are converting  
Converter  
from”.  
Your phone comes with a built-in conversion application. This  
conversion menu provides the following conversion categories:  
The resulting converted values (“to”) are automatically displayed in  
a list.  
6. Touch Reset to erase the current values and begin again.  
7. To exit, press or press  
Currency  
Length  
Weight  
.
Tools  
137  
     
2. Touch the Trash Can (  
) next to the entry you wish to  
World Clock  
delete.  
World Clock allows you to view the time of day or night in another  
parts of the world. World displays time in the 100 different cities,  
within all 24 time zones around the world. The time in your time  
zone is automatically displayed.  
Timer  
You can use this menu to set a countdown timer. Use a timer to  
count down to an event based on a preset time length (hours,  
minutes, and seconds).  
To add another time zone:  
1. Touch  
My Stuff  
Tools  
World Clock  
Add.  
1. Touch  
My Stuff  
Tools  
Timer.  
2. Drag the onscreen map to find the desired global region.  
2. Select a countdown time length for the alert by setting the  
3. Touch a representative city from a desired area. If the city  
Hours, Minutes, and Seconds value.  
area is then correctly highlighted in a different color, your  
Enter a time length with the keypad.  
OK  
selection was accurately read and you can touch  
– or –  
.
3. Touch Start to begin the timer and touch Stop to pause the  
timer.  
If not read correctly, repeat the previous two steps until  
your selection is correct.  
Stopwatch  
You can use this menu to measure intervals of time.  
4. Touch the sun symbol next to the time to add or remove  
Daylight Savings Time. If Daylight Savings Time is  
1. Touch  
My Stuff  
Tools  
Stopwatch  
Start.  
2. Touch Stop to stop the stopwatch and touch Lap to mark a  
selected, the sun symbol will appear orange and display  
unit of time per lap. You can record up to 50 lap times.  
on”  
Deleting a World Clock Entry  
My Stuff  
.
3. Touch Reset to erase all times recorded.  
1. Touch  
Tools  
World Clock  
Delete.  
138  
                   
Section 18: Accessibility  
TTY Settings  
TTY (also known as a TDD or Text Telephone) is a  
telecommunications device that allows people who are deaf or  
hard of hearing, or who have speech or language disabilities, to  
communicate via a telephone. This phone comes TTY-ready and  
only requires the insertion of the TTY device to enable this  
feature.  
Use the following steps to access the TTY settings:  
Inserting a TTY connector into the Headset/Adapter jack (on  
the left side of the phone) enables this function.  
For additional technical support you may access the following  
website or call 1-888-987-4357.  
Accessibility  
139  
   
Section 19: Health and Safety Information  
This section outlines the safety precautions associated with using  
your phone. These safety precautions should be followed to  
safely use your phone.  
absorption of RF energy by the human body expressed in units of  
watts per kilogram (W/kg). The FCC requires wireless phones to  
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).  
Health and Safety Information  
Exposure to Radio Frequency (RF) Signals  
Certification Information (SAR)  
The FCC exposure limit incorporates a substantial margin of  
safety to give additional protection to the public and to account  
for any variations in measurements.  
SAR tests are conducted using standard operating positions  
accepted by the FCC with the phone transmitting at its highest  
certified power level in all tested frequency bands. Although the  
SAR is determined at the highest certified power level, the actual  
SAR level of the phone while operating can be well below the  
maximum value. This is because the phone is designed to  
operate at multiple power levels so as to use only the power  
required to reach the network. In general, the closer you are to a  
wireless base station antenna, the lower the power output.  
Your wireless phone is a radio transmitter and receiver. It is  
designed and manufactured not to exceed the exposure limits for  
radio frequency (RF) energy set by the Federal Communications  
Commission (FCC) of the U.S. government.  
These FCC exposure limits are derived from the  
recommendations of two expert organizations, the National  
Counsel on Radiation Protection and Measurement (NCRP) and  
the Institute of Electrical and Electronics Engineers (IEEE).  
In both cases, the recommendations were developed by scientific  
and engineering experts drawn from industry, government, and  
academia after extensive reviews of the scientific literature  
related to the biological effects of RF energy.  
Before a new model phone is available for sale to the public, it  
must be tested and certified to the FCC that it does not exceed  
the exposure limit established by the FCC. Tests for each model  
phone are performed in positions and locations (e.g. at the ear  
and worn on the body) as required by the FCC.  
The exposure limit set by the FCC for wireless mobile phones  
employs a unit of measurement known as the Specific  
Absorption Rate (SAR). The SAR is a measure of the rate of  
140  
       
For body worn operation, this phone has been tested and meets  
FCC RF exposure guidelines when used with an accessory that  
contains no metal and that positions the handset a minimum of  
1.5 cm from the body.  
SAR information on this and other model phones can be viewed  
online at http://www.fcc.gov/oet/ea. To find information that  
pertains to a particular model phone, this site uses the phone  
FCC ID number which is usually printed somewhere on the case  
of the phone.  
Use of other accessories may not ensure compliance with FCC RF  
exposure guidelines.  
Sometimes it may be necessary to remove the battery pack to  
find the number. Once you have the FCC ID number for a  
particular phone, follow the instructions on the website and it  
should provide values for typical or maximum SAR for a particular  
phone. Additional product specific SAR information can also be  
The FCC has granted an Equipment Authorization for this mobile  
phone with all reported SAR levels evaluated as in compliance  
with the FCC RF exposure guidelines. The maximum SAR values  
for this model phone as reported to the FCC are:  
GSM 850  
:
Warning Regarding Display  
Head: 0.348 W/Kg.  
Body-worn: 0.578 W/Kg.  
The display on your handset is made of glass or acrylic and could  
break if your handset is dropped or if it receives significant  
impact. Do not use if screen is broken or cracked as this could  
cause injury to you.  
GSM 1900  
:
Head: 0.504 W/Kg.  
Body-worn: 0.695 W/Kg.  
Samsung Mobile Products and Recycling  
Samsung cares for the environment and encourages its  
customers to recycle Samsung mobile phones and genuine  
Samsung accessories.  
WCDMA 850  
:
Head: 0.353 W/Kg.  
Body-worn: 0.305 W/Kg.  
WCDMA 1900  
:
1-800-822-8837 for more information.  
Head: 0.786 W/Kg.  
Body-worn: 0.613 W/Kg.  
Health and Safety Information  
141  
   
What kinds of phones are the subject of this update?  
UL Certified Travel Adapter  
The Travel Adapter for this phone has met applicable UL safety  
requirements. Please adhere to the following safety instructions  
per UL guidelines.  
The term wireless phone refers here to hand-held wireless  
phones with built-in antennas, often called "cell," "mobile," or  
"PCS" phones. These types of wireless phones can expose the  
user to measurable radio frequency energy (RF) because of the  
short distance between the phone and the user's head. These RF  
exposures are limited by Federal Communications Commission  
safety guidelines that were developed with the advice of FDA and  
other federal health and safety agencies.  
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD  
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY  
DAMAGE.  
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE  
INSTRUCTIONS.  
When the phone is located at greater distances from the user, the  
exposure to RF is drastically lower because a person's RF  
exposure decreases rapidly with increasing distance from the  
source. The so-called "cordless phones," which have a base unit  
connected to the telephone wiring in a house, typically operate at  
far lower power levels, and thus produce RF exposures well  
within the FCC's compliance limits.  
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,  
CAREFULLY FOLLOW THESE INSTRUCTIONS.  
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE  
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER  
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS  
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR  
HORIZONTAL OR FLOOR MOUNT POSITION.  
Do wireless phones pose a health hazard?  
Consumer Information on Wireless Phones  
The available scientific evidence does not show that any health  
problems are associated with using wireless phones. There is no  
proof, however, that wireless phones are absolutely safe.  
Wireless phones emit low levels of radio frequency energy (RF) in  
the microwave range while being used. They also emit very low  
levels of RF when in the stand-by mode. Whereas high levels of  
RF can produce health effects (by heating tissue), exposure to  
The U.S. Food and Drug Administration (FDA) has published a  
series of Questions and Answers for consumers relating to radio  
frequency (RF) exposure from wireless phones. The FDA  
publication includes the following information:  
142  
     
low level RF that does not produce heating effects causes no  
known adverse health effects. Many studies of low level RF  
exposures have not found any biological effects. Some studies  
have suggested that some biological effects may occur, but such  
findings have not been confirmed by additional research. In some  
cases, other researchers have had difficulty in reproducing those  
studies, or in determining the reasons for inconsistent results.  
Design wireless phones in a way that minimizes any RF exposure to  
the user that is not necessary for device function; and  
Cooperate in providing users of wireless phones with the best possible  
information on possible effects of wireless phone use on human  
health.  
FDA belongs to an interagency working group of the federal  
agencies that have responsibility for different aspects of RF  
safety to ensure coordinated efforts at the federal level. The  
following agencies belong to this working group:  
What is FDA's role concerning the safety of wireless  
phones?  
National Institute for Occupational Safety and Health  
Environmental Protection Agency  
Under the law, FDA does not review the safety of radiation-  
emitting consumer products such as wireless phones before they  
can be sold, as it does with new drugs or medical devices.  
However, the agency has authority to take action if wireless  
phones are shown to emit radio frequency energy (RF) at a level  
that is hazardous to the user.  
Federal Communications Commission  
Occupational Safety and Health Administration  
National Telecommunications and Information Administration  
The National Institutes of Health participates in some interagency  
working group activities, as well.  
In such a case, FDA could require the manufacturers of wireless  
phones to notify users of the health hazard and to repair, replace  
or recall the phones so that the hazard no longer exists.  
FDA shares regulatory responsibilities for wireless phones with  
the Federal Communications Commission (FCC). All phones that  
are sold in the United States must comply with FCC safety  
guidelines that limit RF exposure. FCC relies on FDA and other  
health agencies for safety questions about wireless phones.  
Although the existing scientific data do not justify FDA regulatory  
actions, FDA has urged the wireless phone industry to take a  
number of steps, including the following:  
Support needed research into possible biological effects of RF of the  
type emitted by wireless phones;  
FCC also regulates the base stations that the wireless phone  
networks rely upon. While these base stations operate at higher  
Health and Safety Information  
143  
power than do the wireless phones themselves, the RF  
exposures that people get from these base stations are typically  
thousands of times lower than those they can get from wireless  
phones.  
Three large epidemiology studies have been published since  
December 2000. Between them, the studies investigated any  
possible association between the use of wireless phones and  
primary brain cancer, glioma, meningioma, or acoustic neuroma,  
tumors of the brain or salivary gland, leukemia, or other cancers.  
None of the studies demonstrated the existence of any harmful  
health effects from wireless phones RF exposures.  
Base stations are thus not the primary subject of the safety  
questions discussed in this document.  
What are the results of the research done already?  
However, none of the studies can answer questions about long-  
term exposures, since the average period of phone use in these  
studies was around three years.  
The research done thus far has produced conflicting results, and  
many studies have suffered from flaws in their research  
methods. Animal experiments investigating the effects of radio  
frequency energy (RF) exposures characteristic of wireless  
phones have yielded conflicting results that often cannot be  
repeated in other laboratories. A few animal studies, however,  
have suggested that low levels of RF could accelerate the  
development of cancer in laboratory animals. However, many of  
the studies that showed increased tumor development used  
animals that had been genetically engineered or treated with  
cancer-causing chemicals so as to be pre-disposed to develop  
cancer in absence of RF exposure. Other studies exposed the  
animals to RF for up to 22 hours per day. These conditions are  
not similar to the conditions under which people use wireless  
phones, so we don't know with certainty what the results of such  
studies mean for human health.  
What research is needed to decide whether RF exposure  
from wireless phones poses a health risk?  
A combination of laboratory studies and epidemiological studies  
of people actually using wireless phones would provide some of  
the data that are needed. Lifetime animal exposure studies could  
be completed in a few years. However, very large numbers of  
animals would be needed to provide reliable proof of a cancer  
promoting effect if one exists. Epidemiological studies can  
provide data that is directly applicable to human populations, but  
ten or more years' follow-up may be needed to provide answers  
about some health effects, such as cancer.  
This is because the interval between the time of exposure to a  
cancer-causing agent and the time tumors develop - if they do -  
may be many, many years. The interpretation of epidemiological  
144  
studies is hampered by difficulties in measuring actual RF  
exposure during day-to-day use of wireless phones. Many  
factors affect this measurement, such as the angle at which the  
phone is held, or which model of phone is used.  
CTIA-funded research is conducted through contracts to  
independent investigators. The initial research will include both  
laboratory studies and studies of wireless phone users. The  
CRADA will also include a broad assessment of additional  
research needs in the context of the latest research  
developments around the world.  
What is FDA doing to find out more about the possible  
health effects of wireless phone RF?  
What steps can I take to reduce my exposure to radio  
frequency energy from my wireless phone?  
FDA is working with the U.S. National Toxicology Program and  
with groups of investigators around the world to ensure that high  
priority animal studies are conducted to address important  
questions about the effects of exposure to radio frequency  
energy (RF).  
If there is a risk from these products - and at this point we do not  
know that there is - it is probably very small. But if you are  
concerned about avoiding even potential risks, you can take a  
few simple steps to minimize your exposure to radio frequency  
energy (RF). Since time is a key factor in how much exposure a  
person receives, reducing the amount of time spent using a  
wireless phone will reduce RF exposure.  
FDA has been a leading participant in the World Health  
Organization international Electromagnetic Fields (EMF) Project  
since its inception in 1996. An influential result of this work has  
been the development of a detailed agenda of research needs  
that has driven the establishment of new research programs  
around the world. The Project has also helped develop a series of  
public information documents on EMF issues.  
If you must conduct extended conversations by wireless phone every  
day, you could place more distance between your body and the source  
of the RF, since the exposure level drops off dramatically with distance.  
For example, you could use a headset and carry the wireless phone  
away from your body or use a wireless phone connected to a remote  
antenna.  
FDA and Cellular Telecommunications & Internet Association  
(CTIA) have a formal Cooperative Research and Development  
Agreement (CRADA) to do research on wireless phone safety.  
FDA provides the scientific oversight, obtaining input from  
experts in government, industry, and academic organizations.  
Again, the scientific data do not demonstrate that wireless  
phones are harmful. But if you are concerned about the RF  
exposure from these products, you can use measures like those  
Health and Safety Information  
145  
described above to reduce your RF exposure from wireless phone  
use.  
phones for convenience and comfort. These systems reduce the  
absorption of RF energy in the head because the phone, which is  
the source of the RF emissions, will not be placed against the  
head. On the other hand, if the phone is mounted against the  
waist or other part of the body during use, then that part of the  
body will absorb more RF energy. Wireless phones marketed in  
the U.S. are required to meet safety requirements regardless of  
whether they are used against the head or against the body.  
Either configuration should result in compliance with the safety  
limit.  
What about children using wireless phones?  
The scientific evidence does not show a danger to users of  
wireless phones, including children and teenagers. If you want to  
take steps to lower exposure to radio frequency energy (RF), the  
measures described above would apply to children and  
teenagers using wireless phones. Reducing the time of wireless  
phone use and increasing the distance between the user and the  
RF source will reduce RF exposure.  
Do wireless phone accessories that claim to shield  
the head from RF radiation work?  
Some groups sponsored by other national governments have  
advised that children be discouraged from using wireless phones  
at all. For example, the government in the United Kingdom  
distributed leaflets containing such a recommendation in  
December 2000. They noted that no evidence exists that using a  
wireless phone causes brain tumors or other ill effects. Their  
recommendation to limit wireless phone use by children was  
strictly precautionary; it was not based on scientific evidence that  
any health hazard exists.  
Since there are no known risks from exposure to RF emissions  
from wireless phones, there is no reason to believe that  
accessories that claim to shield the head from those emissions  
reduce risks. Some products that claim to shield the user from RF  
absorption use special phone cases, while others involve nothing  
more than a metallic accessory attached to the phone. Studies  
have shown that these products generally do not work as  
advertised. Unlike "hand-free" kits, these so-called "shields"  
may interfere with proper operation of the phone. The phone may  
be forced to boost its power to compensate, leading to an  
increase in RF absorption. In February 2002, the Federal trade  
Commission (FTC) charged two companies that sold devices that  
Do hands-free kits for wireless phones reduce  
risks from exposure to RF emissions?  
Since there are no known risks from exposure to RF emissions  
from wireless phones, there is no reason to believe that hands-  
free kits reduce risks. Hands-free kits can be used with wireless  
146  
claimed to protect wireless phone users from radiation with  
making false and unsubstantiated claims.  
FDA continues to monitor the use of wireless phones for possible  
interactions with other medical devices. Should harmful  
interference be found to occur, FDA will conduct testing to assess  
the interference and work to resolve the problem.  
According to FTC, these defendants lacked a reasonable basis to  
substantiate their claim.  
Additional information on the safety of RF exposures from various  
sources can be obtained from the following organizations  
(Updated 12/1/2006):  
What about wireless phone interference with  
medical equipment?  
Radio frequency energy (RF) from wireless phones can interact  
with some electronic devices. For this reason, FDA helped  
develop a detailed test method to measure electromagnetic  
interference (EMI) of implanted cardiac pacemakers and  
defibrillators from wireless telephones. This test method is now  
part of a standard sponsored by the Association for the  
Advancement of Medical instrumentation (AAMI). The final draft,  
a joint effort by FDA, medical device manufacturers, and many  
other groups, was completed in late 2000. This standard will  
allow manufacturers to ensure that cardiac pacemakers and  
defibrillators are safe from wireless phone EMI. FDA has tested  
wireless phones and helped develop a voluntary standard  
sponsored by the Institute of Electrical and Electronic Engineers  
(IEEE). This standard specifies test methods and performance  
requirements for hearing aids and wireless phones so that no  
interference occurs when a person uses a compatible phone and  
a compatible hearing aid at the same time. This standard was  
approved by the IEEE in 2000.  
FCC RF Safety Program:  
Environmental Protection Agency (EPA):  
Occupational Safety and Health Administration's (OSHA):  
National Institute for Occupational Safety and Health (NIOSH):  
World Health Organization (WHO):  
International Commission on Non-Ionizing Radiation Protection:  
Health Protection Agency:  
US Food and Drug Administration:  
Health and Safety Information  
147  
4. Let the person you are speaking with know you are driving;  
if necessary, suspend the call in heavy traffic or hazardous  
weather conditions. Rain, sleet, snow, ice and even heavy  
traffic can be hazardous.  
Road Safety  
Your wireless phone gives you the powerful ability to  
communicate by voice, almost anywhere, anytime. But an  
important responsibility accompanies the benefits of wireless  
phones, one that every user must uphold.  
5. Do not take notes or look up phone numbers while driving.  
Jotting down a "to do" list or flipping through your address  
book takes attention away from your primary  
responsibility, driving safely.  
When driving a car, driving is your first responsibility. When using  
your wireless phone behind the wheel of a car, practice good  
common sense and remember the following tips:  
1. Get to know your wireless phone and its features, such as  
speed dial and redial. If available, these features help you  
to place your call without taking your attention off the road.  
6. Dial sensibly and assess the traffic; if possible, place calls  
when you are not moving or before pulling into traffic. Try  
to plan calls when your car will be stationary. If you need to  
make a call while moving, dial only a few numbers, check  
the road and your mirrors, then continue.  
2. When available, use a hands-free device. If possible, add  
an additional layer of convenience and safety to your  
wireless phone with one of the many hands free  
accessories available today.  
7. Do not engage in stressful or emotional conversations that  
may be distracting. Make people you are talking with  
aware you are driving and suspend conversations that  
have the potential to divert your attention from the road.  
3. Position your wireless phone within easy reach. Be able to  
access your wireless phone without removing your eyes  
from the road. If you get an incoming call at an  
inconvenient time, let your voice mail answer it for you.  
8. Use your wireless phone to call for help. Dial 9-1-1 or other  
local emergency number in the case of fire, traffic accident  
or medical emergencies.  
148  
 
9. Use your wireless phone to help others in emergencies. If  
you see an auto accident, crime in progress or other  
serious emergency where lives are in danger, call 9-1-1 or  
other local emergency number, as you would want others  
to do for you.  
Responsible Listening  
Caution!: Avoid potential hearing loss.  
Damage to hearing occurs when a person is exposed to loud  
sounds over time. The risk of hearing loss increases as sound is  
played louder and for longer durations. Prolonged exposure to  
loud sounds (including music) is the most common cause of  
preventable hearing loss. Some scientific research suggests that  
using portable audio devices, such as portable music players and  
cellular telephones, at high volume settings for long durations  
may lead to permanent noise-induced hearing loss. This includes  
the use of headphones (including headsets, earbuds, and  
Bluetooth or other wireless devices). Exposure to very loud sound  
has also been associated in some studies with tinnitus (a ringing  
in the ear), hypersensitivity to sound and distorted hearing.  
10. Call roadside assistance or a special non-emergency  
wireless assistance number when necessary. If you see a  
broken-down vehicle posing no serious hazard, a broken  
traffic signal, a minor traffic accident where no one  
appears injured, or a vehicle you know to be stolen, call  
roadside assistance or other special non-emergency  
number.  
"The wireless industry reminds you to use your phone safely when  
driving."  
Individual susceptibility to noise-induced hearing loss and  
potential hearing problem varies. Additionally, the amount of  
sound produced by a portable audio device varies depending on  
the nature of the sound, the device settings, and the headphones  
that are used. As a result, there is no single volume setting that is  
appropriate for everyone or for every combination of sound,  
settings and equipment.  
For more information, please call 1-888-901-SAFE, or visit our  
.
Important!: If you are using a handset other than a standard numeric keypad,  
please call 1-888-901-7233.  
Provided by the Cellular Telecommunications & Internet  
Association.  
You should follow some commonsense recommendations when  
using any portable audio device:  
Health and Safety Information  
149  
   
Set the volume in a quiet environment and select the lowest volume at  
which you can hear adequately.  
You can obtain additional information on this subject from the  
following sources:  
When using headphones, turn the volume down if you cannot hear the  
people speaking near you or if the person sitting next to you can hear  
what you are listening to.  
American Academy of Audiology  
11730 Plaza American Drive, Suite 300  
Reston, VA 20190  
Do not turn the volume up to block out noisy surroundings. If you  
choose to listen to your portable device in a noisy environment, use  
noise-cancelling headphones to block out background environmental  
noise. By blocking background environment noise, noise cancelling  
headphones should allow you to hear the music at lower volumes than  
when using earbuds.  
Voice: (800) 222-2336  
National Institute on Deafness and Other Communication Disorders  
National Institutes of Health  
Limit the amount of time you listen. As the volume increases, less time  
is required before you hearing could be affected.  
Avoid using headphones after exposure to extremely loud noises, such  
as rock concerts, that might cause temporary hearing loss. Temporary  
hearing loss might cause unsafe volumes to sound normal.  
31 Center Drive, MSC 2320  
Bethesda, MD 20892-2320  
Do not listen at any volume that causes you discomfort. If you  
experience ringing in your ears, hear muffled speech or experience  
any temporary hearing difficulty after listening to your portable audio  
device, discontinue use and consult your doctor.  
150  
As with other mobile radio transmitting equipment, users are  
advised that for the satisfactory operation of the equipment and  
for the safety of personnel, it is recommended that the  
equipment should only be used in the normal operating position  
(held to your ear with the antenna pointing over your shoulder if  
you are using an external antenna).  
National Institute for Occupational Safety and Health (NIOSH)  
395 E Street, S.W.  
Suite 9200  
Patriots Plaza Building  
Washington, DC 20201  
UsingYourPhoneNearOtherElectronicDevices  
Voice: 1-800-35-NIOSH (1-800-356-4647)  
1-800-CDC-INFO (1-800-232-4636)  
Outside the U.S. 513-533-8328  
Most modern electronic equipment is shielded from radio  
frequency (RF) signals. However, certain electronic equipment  
may not be shielded against the RF signals from your wireless  
phone. Consult the manufacturer to discuss alternatives.  
Implantable Medical Devices  
A minimum separation of six (6) inches should be maintained  
between a handheld wireless phone and an implantable medical  
device, such as a pacemaker or implantable cardioverter  
defibrillator, to avoid potential interference with the device.  
1-888-232-6348 TTY  
Operating Environment  
Remember to follow any special regulations in force in any area  
and always switch your phone off whenever it is forbidden to use  
it, or when it may cause interference or danger.  
Persons who have such devices:  
Should ALWAYS keep the phone more than six (6) inches from their  
implantable medical device when the phone is turned ON;  
Should not carry the phone in a breast pocket;  
When connecting the phone or any accessory to another device,  
read its user's guide for detailed safety instructions. Do not  
connect incompatible products.  
Should use the ear opposite the implantable medical device to  
minimize the potential for interference;  
Health and Safety Information  
151  
     
Should turn the phone OFF immediately if there is any reason to  
suspect that interference is taking place;  
The wireless telephone industry has developed a rating system  
for wireless phones, to assist hearing device users find phones  
that may be compatible with their hearing devices. Not all phones  
have been rated. Phones that are rated have the rating on their  
box or a label located on the box.  
Should read and follow the directions from the manufacturer of your  
implantable medical device. If you have any questions about using  
your wireless phone with such a device, consult your health care  
provider.  
The ratings are not guarantees. Results will vary depending on  
the user's hearing device and hearing loss. If your hearing device  
happens to be vulnerable to interference, you may not be able to  
use a rated phone successfully. Trying out the phone with your  
hearing device is the best way to evaluate it for your personal  
needs.  
For more information see:  
FCC Hearing-Aid Compatibility (HAC)  
Regulations for Wireless Devices  
On July 10, 2003, the U.S. Federal Communications Commission  
(FCC) Report and Order in WT Docket 01-309 modified the  
exception of wireless phones under the Hearing Aid Compatibility  
Act of 1988 (HAC Act) to require digital wireless phones be  
compatible with hearing-aids.  
M-Ratings: Phones rated M3 or M4 meet FCC requirements and  
are likely to generate less interference to hearing devices than  
phones that are not labeled. M4 is the better/higher of the two  
ratings.  
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are  
likely to generate less interference to hearing devices than  
phones that are not labeled. T4 is the better/higher of the two  
ratings.  
The intent of the HAC Act is to ensure reasonable access to  
telecommunications services for persons with hearing  
disabilities.  
While some wireless phones are used near some hearing devices  
(hearing aids and cochlear implants), users may detect a  
buzzing, humming, or whining noise. Some hearing devices are  
more immune than others to this interference noise, and phones  
also vary in the amount of interference they generate.  
Hearing devices may also be rated. Your hearing device  
manufacturer or hearing health professional may help you find  
this rating. Higher ratings mean that the hearing device is  
relatively immune to interference noise. The hearing aid and  
wireless phone rating values are then added together. A sum of 5  
152  
         
is considered acceptable for normal use. A sum of 6 is  
considered for best use.  
The HAC rating and measurement procedure are described in the  
American National Standards Institute (ANSI) C63.19 standard.  
Other Medical Devices  
If you use any other personal medical devices, consult the  
manufacturer of your device to determine if it is adequately  
shielded from external RF energy. Your physician may be able to  
assist you in obtaining this information. Switch your phone off in  
health care facilities when any regulations posted in these areas  
instruct you to do so. Hospitals or health care facilities may be  
using equipment that could be sensitive to external RF energy.  
T3  
+
T2  
=
5
M3  
+
M2  
=
5
Vehicles  
In the above example, if a hearing aid meets the M2 level rating  
and the wireless phone meets the M3 level rating, the sum of the  
two values equal M5. This is synonymous for T ratings. This  
should provide the hearing aid user with "normal usage" while  
using their hearing aid with the particular wireless phone.  
"Normal usage" in this context is defined as a signal quality that  
is acceptable for normal operation.  
RF signals may affect improperly installed or inadequately  
shielded electronic systems in motor vehicles. Check with the  
manufacturer or its representative regarding your vehicle. You  
should also consult the manufacturer of any equipment that has  
been added to your vehicle.  
Posted Facilities  
The M mark is intended to be synonymous with the U mark. The  
T mark is intended to be synonymous with the UT mark. The M  
and T marks are recommended by the Alliance for  
Telecommunications Industries Solutions (ATIS). The U and UT  
marks are referenced in Section 20.19 of the FCC Rules.  
Switch your phone off in any facility where posted notices require  
you to do so.  
Potentially Explosive Environments  
Switch your phone off when in any area with a potentially  
explosive atmosphere and obey all signs and instructions. Sparks  
Health and Safety Information  
153  
 
in such areas could cause an explosion or fire resulting in bodily  
injury or even death.  
networks or when certain network services and/or phone  
features are in use. Check with local service providers.  
Users are advised to switch the phone off while at a refueling  
point (service station). Users are reminded of the need to observe  
restrictions on the use of radio equipment in fuel depots (fuel  
storage and distribution areas), chemical plants or where blasting  
operations are in progress.  
To make an emergency call:  
1. If the phone is not on, switch it on.  
2. Key in the emergency number for your present location (for  
example, 911 or other official emergency number).  
Emergency numbers vary by location.  
Areas with a potentially explosive atmosphere are often but not  
always clearly marked. They include below deck on boats,  
chemical transfer or storage facilities, vehicles using liquefied  
petroleum gas (such as propane or butane), areas where the air  
contains chemicals or particles, such as grain, dust or metal  
powders, and any other area where you would normally be  
advised to turn off your vehicle engine.  
3. Press the  
key.  
If certain features are in use (call barring, for example), you may  
first need to deactivate those features before you can make an  
emergency call. Consult this document and your local cellular  
service provider.  
When making an emergency call, remember to give all the  
necessary information as accurately as possible. Remember that  
your phone may be the only means of communication at the  
scene of an accident; do not cut off the call until given  
permission to do so.  
Emergency Calls  
This phone, like any wireless phone, operates using radio  
signals, wireless and landline networks as well as user-  
programmed functions, which cannot guarantee connection in all  
conditions. Therefore, you should never rely solely on any  
wireless phone for essential communications (medical  
emergencies, for example).  
Restricting Children's access to your Phone  
Your phone is not a toy. Children should not be allowed to play  
with it because they could hurt themselves and others, damage  
the phone or make calls that increase your phone bill.  
Remember, to make or receive any calls the phone must be  
switched on and in a service area with adequate signal strength.  
Emergency calls may not be possible on all wireless phone  
154  
 
phone warranty if said accessories cause damage or a defect to  
the phone.  
FCC Notice and Cautions  
FCC Notice  
Although your phone is quite sturdy, it is a complex piece of  
equipment and can be broken. Avoid dropping, hitting, bending  
or sitting on it.  
The phone may cause TV or radio interference if used in close  
proximity to receiving equipment. The FCC can require you to  
stop using the phone if such interference cannot be eliminated.  
Other Important Safety Information  
Vehicles using liquefied petroleum gas (such as propane or  
butane) must comply with the National Fire Protection Standard  
(NFPA-58). For a copy of this standard, contact the National Fire  
Protection Association:  
Only qualified personnel should service the phone or install the phone  
in a vehicle. Faulty installation or service may be dangerous and may  
invalidate any warranty applicable to the device.  
Check regularly that all wireless phone equipment in your vehicle is  
mounted and operating properly.  
NFPA (National Fire Protection Agency)  
1 Batterymarch Park  
Do not store or carry flammable liquids, gases or explosive materials in  
the same compartment as the phone, its parts or accessories.  
Quincy, Massachusetts  
For vehicles equipped with an air bag, remember that an air bag  
inflates with great force. Do not place objects, including both installed  
or portable wireless equipment in the area over the air bag or in the air  
bag deployment area. If wireless equipment is improperly installed and  
the air bag inflates, serious injury could result.  
USA 02169-7471  
Cautions  
Switch your phone off before boarding an aircraft. The use of wireless  
phone in aircraft is illegal and may be dangerous to the aircraft's  
operation.  
Any changes or modifications to your phone not expressly  
approved in this document could void your warranty for this  
equipment, and void your authority to operate this equipment.  
Only use approved batteries, antennas and chargers. The use of  
any unauthorized accessories may be dangerous and void the  
Failure to observe these instructions may lead to the suspension or  
denial of telephone services to the offender, or legal action, or both.  
Health and Safety Information  
155  
   
Maintaining Your Phone's Peak Performance  
Product Performance  
Getting the Most Out of Your Signal Reception  
For the best care of your phone, only authorized personnel should  
service your phone and accessories. Faulty service may void the  
warranty.  
The quality of each call you make or receive depends on the  
signal strength in your area. Your phone informs you of the  
current signal strength by displaying a number of bars next to the  
signal strength icon. The more bars displayed, the stronger the  
signal.  
There are several simple guidelines to operating your phone  
To ensure that the Hearing Aid Compatibility rating for your phone is  
maintained, secondary transmitters such as Bluetooth and WLAN  
components must be disabled during a call. For more information,  
refer to “Bluetooth Activation and Deactivation” on page 55.  
If you're inside a building, being near a window may give you  
better reception.  
Understanding the Power Save Feature  
If your phone is equipped with an external antenna, hold the phone  
with the antenna raised, fully-extended and over your shoulder.  
If your phone is unable to find a signal after searching, a Power  
Save feature is automatically activated. If your phone is active, it  
periodically rechecks service availability or you can check it  
yourself by pressing any key.  
Do not hold, bend or twist the phone's antenna, if applicable.  
Do not use the phone if the antenna is damaged.  
If your phone is equipped with an internal antenna, obstructing the  
internal antenna could inhibit call performance.  
Anytime the Power Save feature is activated, a message displays  
on the screen. When a signal is found, your phone returns to  
standby mode.  
Speak directly into the phone's receiver.  
Avoid exposing your phone and accessories to rain or liquid spills. If  
your phone does get wet, immediately turn the power off and remove  
the battery. If it is inoperable, call Customer Care for service.  
Understanding How Your Phone Operates  
Your phone is basically a radio transmitter and receiver. When it's  
turned on, it receives and transmits radio frequency (RF) signals.  
When you use your phone, the system handling your call controls  
the power level. This power can range from 0.006 watts to 0.2  
watts in digital mode.  
Availability of Various Features/Ring Tones  
Many services and features are network dependent and may  
require additional subscription and/or usage charges. Not all  
156  
   
features are available for purchase or use in all areas.  
Downloadable Ring Tones may be available at an additional cost.  
Other conditions and restrictions may apply. See your service  
provider for additional information.  
Battery charging time depends on the remaining battery charge and  
the type of battery and charger used. The battery can be charged and  
discharged hundreds of times, but it will gradually wear out. When the  
operation time (talk time and standby time) is noticeably shorter than  
normal, it is time to buy a new battery.  
Battery Standby and Talk Time  
If left unused, a fully charged battery will discharge itself over time.  
Standby and talk times will vary depending on phone usage  
patterns and conditions. Battery power consumption depends on  
factors such as network configuration, signal strength, operating  
temperature, features selected, frequency of calls, and voice,  
data, and other application usage patterns.  
Use only Samsung-approved batteries and recharge your battery only  
with Samsung-approved chargers. When a charger is not in use,  
disconnect it from the power source. Do not leave the battery  
connected to a charger for more than a week, since overcharging may  
shorten its life.  
Battery Precautions  
Do not use incompatible cell phone batteries and chargers. Some Web  
sites and second-hand dealers, not associated with reputable  
manufacturers and carriers, might be selling incompatible or even  
counterfeit batteries and chargers. Consumers should purchase  
manufacturer or carrier recommended products and accessories. If  
unsure about whether a replacement battery or charger is compatible,  
contact the manufacturer of the battery or charger.  
Avoid dropping the cell phone. Dropping it, especially on a hard  
surface, can potentially cause damage to the phone and battery. If you  
suspect damage to the phone or battery, take it to a service center for  
inspection.  
Never use any charger or battery that is damaged in any way.  
Do not modify or remanufacture the battery as this could result in  
serious safety hazards.  
Misuse or use of incompatible phones, batteries, and charging devices  
could result in damage to the equipment and a possible risk of fire,  
explosion, leakage, or other serious hazard.  
If you use the phone near the network's base station, it uses less  
power; talk and standby time are greatly affected by the signal  
strength on the cellular network and the parameters set by the  
network operator.  
Extreme temperatures will affect the charging capacity of your battery:  
it may require cooling or warming first.  
Follow battery usage, storage and charging guidelines found in the  
user’s guide.  
Health and Safety Information  
157  
   
Do not leave the battery in hot or cold places, such as in a car in  
summer or winter conditions, as you will reduce the capacity and  
lifetime of the battery. Always try to keep the battery at room  
temperature. A phone with a hot or cold battery may temporarily not  
work, even when the battery is fully charged. Li-ion batteries are  
particularly affected by temperatures below  
Dispose of used batteries in accordance with local regulations. In some  
areas, the disposal of batteries in household or business trash may be  
prohibited. For safe disposal options for Li-Ion batteries, contact your  
nearest Samsung authorized service center. Always recycle. Do not  
dispose of batteries in a fire.  
Care and Maintenance  
0 °C (32 °F).  
Your phone is a product of superior design and craftsmanship  
and should be treated with care. The suggestions below will help  
you fulfill any warranty obligations and allow you to enjoy this  
product for many years.  
Do not place the phone in areas that may get very hot, such as on or  
near a cooking surface, cooking appliance, iron, or radiator.  
Do not get your phone or battery wet. Even though they will dry and  
appear to operate normally, the circuitry could slowly corrode and  
pose a safety hazard.  
Keep the phone and all its parts and accessories out of the reach of  
small children.  
Do not short-circuit the battery. Accidental short-circuiting can occur  
when a metallic object (coin, clip or pen) causes a direct connection  
between the + and - terminals of the battery (metal strips on the  
battery), for example when you carry a spare battery in a pocket or  
bag. Short-circuiting the terminals may damage the battery or the  
object causing the short-circuiting.  
Keep the phone dry. Precipitation, humidity and liquids contain  
minerals that will corrode electronic circuits.  
Do not use the phone with a wet hand. Doing so may cause an electric  
shock to you or damage to the phone.  
Do not use or store the phone in dusty, dirty areas, as its moving parts  
may be damaged.  
Do not permit a battery out of the phone to come in contact with metal  
objects, such as coins, keys or jewelry.  
Do not store the phone in hot areas. High temperatures can shorten the  
life of electronic devices, damage batteries, and warp or melt certain  
plastics.  
Do not crush, puncture or put a high degree of pressure on the battery  
as this can cause an internal short-circuit, resulting in overheating.  
Do not store the phone in cold areas. When the phone warms up to its  
normal operating temperature, moisture can form inside the phone,  
which may damage the phone's electronic circuit boards.  
158  
 
Do not drop, knock or shake the phone. Rough handling can break  
internal circuit boards.  
Do not use harsh chemicals, cleaning solvents or strong detergents to  
clean the phone. Wipe it with a soft cloth slightly dampened in a mild  
soap-and-water solution.  
Do not paint the phone. Paint can clog the device's moving parts and  
prevent proper operation.  
Do not put the phone in or on heating devices, such as a microwave  
oven, a stove or a radiator. The phone may explode when overheated.  
If your phone is equipped with an external antenna, use only the  
supplied or an approved replacement antenna. Unauthorized antennas  
or modified accessories may damage the phone and violate  
regulations governing radio devices.  
If the phone, battery, charger or any accessory is not working properly,  
take it to your nearest qualified service facility. The personnel there  
will assist you, and if necessary, arrange for service.  
Health and Safety Information  
159  
Section 20: Warranty Information  
Standard Limited Warranty  
removed or made illegible; (c) any plastic surfaces or other  
externally exposed parts that are scratched or damaged due to  
normal use; (d) malfunctions resulting from the use of Product in  
conjunction with accessories, products, or ancillary/peripheral  
equipment not furnished or approved by SAMSUNG; (e) defects or  
damage from improper testing, operation, maintenance,  
installation, or adjustment; (f) installation, maintenance, and  
service of Product, or (g) Product used or purchased outside the  
United States or Canada.  
What is Covered and For How Long?  
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")  
warrants to the original purchaser ("Purchaser") that SAMSUNG's  
Phones and accessories ("Products") are free from defects in  
material and workmanship under normal use and service for the  
period commencing upon the date of purchase and continuing for  
the following specified period of time after that date:  
This Limited Warranty covers batteries only if battery capacity  
falls below 80% of rated capacity or the battery leaks, and this  
Limited Warranty does not cover any battery if (i) the battery has  
been charged by a battery charger not specified or approved by  
SAMSUNG for charging the battery, (ii) any of the seals on the  
battery are broken or show evidence of tampering, or (iii) the  
battery has been used in equipment other than the SAMSUNG  
phone for which it is specified.  
Phone  
1 Year  
Batteries  
1 Year  
Leather Case  
Holster  
90 Days  
90 Days  
1 Year  
Other Phone Accessories  
What is Not Covered? This Limited Warranty is conditioned upon  
proper use of Product by Purchaser. This Limited Warranty does  
not cover: (a) defects or damage resulting from accident, misuse,  
abuse, neglect, unusual physical, electrical or electromechanical  
stress, or modification of any part of Product, including antenna,  
or cosmetic damage; (b) equipment that has the serial number  
What are SAMSUNG's Obligations? During the applicable warranty  
period, SAMSUNG will repair or replace, at SAMSUNG's sole  
option, without charge to Purchaser, any defective component  
part of Product. To obtain service under this Limited Warranty,  
Purchaser must return Product to an authorized phone service  
160  
       
facility in an adequate container for shipping, accompanied by  
Purchaser's sales receipt or comparable substitute proof of sale  
showing the date of purchase, the serial number of Product and  
the sellers' name and address. To obtain assistance on where to  
deliver the Product, call Samsung Customer Care at 1-888-987-  
4357. Upon receipt, SAMSUNG will promptly repair or replace the  
defective Product. SAMSUNG may, at SAMSUNG's sole option,  
use rebuilt, reconditioned, or new parts or components when  
repairing any Product or replace Product with a rebuilt,  
reconditioned or new Product. Repaired/replaced leather cases,  
pouches and holsters will be warranted for a period of ninety (90)  
days. All other repaired/replaced Product will be warranted for a  
period equal to the remainder of the original Limited Warranty on  
the original Product or for 90 days, whichever is longer. All  
replaced parts, components, boards and equipment shall  
become the property of SAMSUNG.  
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO  
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:  
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE;  
WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;  
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS  
CONTAINED THEREIN; OR  
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY  
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.  
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE  
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND  
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED  
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION  
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES  
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF  
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.  
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW  
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION  
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE  
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE  
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE  
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE  
If SAMSUNG determines that any Product is not covered by this  
Limited Warranty, Purchaser must pay all parts, shipping, and  
labor charges for the repair or return of such Product.  
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED  
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND  
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND  
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY  
Warranty Information  
161  
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF  
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,  
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF  
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO  
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO  
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR  
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING  
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS  
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,  
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE  
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR  
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY  
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO  
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE  
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,  
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY  
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER  
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH  
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.  
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS  
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR  
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER  
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE  
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL  
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT  
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL  
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY  
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED  
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE  
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES  
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS  
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY  
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR  
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY  
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH  
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE  
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS  
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE  
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT  
This Limited Warranty allocates risk of Product failure between  
Purchaser and SAMSUNG, and SAMSUNG's Product pricing  
reflects this allocation of risk and the limitations of liability  
contained in this Limited Warranty. The agents, employees,  
distributors, and dealers of SAMSUNG are not authorized to make  
modifications to this Limited Warranty, or make additional  
warranties binding on SAMSUNG. Accordingly, additional  
statements such as dealer advertising or presentation, whether  
oral or written, do not constitute warranties by SAMSUNG and  
should not be relied upon.  
162  
only; provided that the backup copy must include all copyright or  
other proprietary notices contained on the original.  
End User License Agreement for Software  
IMPORTANT. READ CAREFULLY: This End User License Agreement  
("EULA") is a legal agreement between you (either an individual  
or a single entity) and Samsung Electronics Co., Ltd. for software  
owned by Samsung Electronics Co., Ltd. and its affiliated  
companies and its third party suppliers and licensors that  
accompanies this EULA, which includes computer software and  
may include associated media, printed materials, "online" or  
electronic documentation ("Software"). BY CLICKING THE "I  
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE  
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,  
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO  
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT  
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE  
"DECLINE" BUTTON, DISCONTINUE USE OF THE SOFTWARE.  
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves  
all rights not expressly granted to you in this EULA. The Software  
is protected by copyright and other intellectual property laws and  
treaties. Samsung or its suppliers own the title, copyright and  
other intellectual property rights in the Software. The Software is  
licensed, not sold.  
3. LIMITATIONS ON END USER RIGHTS. You may not reverse  
engineer, decompile, disassemble, or otherwise attempt to  
discover the source code or algorithms of, the Software (except  
and only to the extent that such activity is expressly permitted by  
applicable law notwithstanding this limitation), or modify, or  
disable any features of, the Software, or create derivative works  
based on the Software. You may not rent, lease, lend, sublicense  
or provide commercial hosting services with the Software.  
1. GRANT OF LICENSE. Samsung grants you the following rights  
provided that you comply with all terms and conditions of this  
EULA: You may install, use, access, display and run one copy of  
the Software on the local hard disk(s) or other permanent storage  
media of one computer and use the Software on a single  
computer or a mobile device at a time, and you may not make  
the Software available over a network where it could be used by  
multiple computers at the same time. You may make one copy of  
the Software in machine-readable form for backup purposes  
4. CONSENT TO USE OF DATA. You agree that Samsung and its  
affiliates may collect and use technical information gathered as  
part of the product support services related to the Software  
provided to you, if any, related to the Software. Samsung may  
use this information solely to improve its products or to provide  
customized services or technologies to you and will not disclose  
this information in a form that personally identifies you.  
Warranty Information  
163  
 
5. UPGRADES. This EULA applies to updates, supplements and  
add-on components (if any) of the Software that Samsung may  
provide to you or make available to you after the date you obtain  
your initial copy of the Software, unless we provide other terms  
along with such upgrade. To use Software identified as an  
upgrade, you must first be licensed for the Software identified by  
Samsung as eligible for the upgrade. After upgrading, you may  
no longer use the Software that formed the basis for your  
upgrade eligibility.  
8. TERMINATION. This EULA is effective until terminated. Your  
rights under this License will terminate automatically without  
notice from Samsung if you fail to comply with any of the terms  
and conditions of this EULA. Upon termination of this EULA, you  
shall cease all use of the Software and destroy all copies, full or  
partial, of the Software.  
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge  
and agree that use of the Software is at your sole risk and that  
the entire risk as to satisfactory quality, performance, accuracy  
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED BY  
APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND  
WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND  
SAMSUNG AND ITS LICENSORS (COLLECTIVELY REFERRED TO AS  
"SAMSUNG" FOR THE PURPOSES OF SECTIONS 9, 10 and 11)  
HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH  
RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR  
STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF  
SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF FITNESS  
FOR A PARTICULAR PURPOSE, OF RELIABILITY OR AVAILABILITY,  
OF ACCURACY, OF LACK OF VIRUSES, OF QUIET ENJOYMENT,  
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG  
DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR  
ENJOYMENT OF THE SOFTWARE, THAT THE FUNCTIONS  
CONTAINED IN THE SOFTWARE WILL MEET YOUR  
6. SOFTWARE TRANSFER. You may not transfer this EULA or the  
rights to the Software granted herein to any third party unless it  
is in connection with the sale of the mobile device which the  
Software accompanied. In such event, the transfer must include  
all of the Software (including all component parts, the media and  
printed materials, any upgrades, this EULA) and you may not  
retain any copies of the Software. The transfer may not be an  
indirect transfer, such as a consignment. Prior to the transfer, the  
end user receiving the Software must agree to all the EULA  
terms.  
7. EXPORT RESTRICTIONS. You acknowledge that the Software is  
subject to export restrictions of various countries. You agree to  
comply with all applicable international and national laws that  
apply to the Software, including the U.S. Export Administration  
Regulations, as well as end user, end use, and destination  
restrictions issued by U.S. and other governments.  
164  
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL  
BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE  
SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN  
INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG  
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY.  
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE  
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR  
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE  
EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON  
APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THESE  
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.  
OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN ADVISED OF  
THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO  
NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL  
INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO  
THIS LIMITATION MAY NOT APPLY TO YOU.  
11. LIMITATION OF LIABILITY. Notwithstanding any damages that  
you might incur for any reason whatsoever (including, without  
limitation, all damages referenced herein and all direct or general  
damages in contract or anything else), the entire liability of  
Samsung under any provision of this EULA and your exclusive  
remedy hereunder shall be limited to the greater of the actual  
damages you incur in reasonable reliance on the Software up to  
the amount actually paid by you for the Software or US$5.00. The  
foregoing limitations, exclusions and disclaimers (including  
Sections 9, 10 and 11) shall apply to the maximum extent  
permitted by applicable law, even if any remedy fails its essential  
purpose.  
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN  
OTHER DAMAGES. TO THE EXTENT NOT PROHIBITED BY LAW, IN  
NO EVENT SHALL SAMSUNG BE LIABLE FOR PERSONAL INJURY,  
OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL  
DAMAGES WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF  
DATA, BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY  
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR  
USE OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF  
OR FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES,  
INFORMATION, SOFTWARE, AND RELATED CONTENT THROUGH  
THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF  
THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION  
WITH ANY PROVISION OF THIS EULA, HOWEVER CAUSED,  
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT  
12. U.S. GOVERNMENT END USERS. The Software is licensed  
only with "restricted rights" and as "commercial items"  
consisting of "commercial software" and "commercial software  
documentation" with only those rights as are granted to all other  
end users pursuant to the terms and conditions herein.  
13. APPLICABLE LAW. This EULA is governed by the laws of  
TEXAS, without regard to conflicts of laws principles. This EULA  
Warranty Information  
165  
shall not be governed by the UN Convention on Contracts for the  
International Sale of Goods, the application of which is expressly  
excluded. If a dispute, controversy or difference is not amicably  
settled, it shall be finally resolved by arbitration in Seoul, Korea in  
accordance with the Arbitration Rules of the Korean Commercial  
Arbitration Board. The award of arbitration shall be final and  
binding upon the parties.  
default settings. Please contact the Samsung Customer Care  
Center for details.  
Important!: Please provide warranty information (proof of purchase) to  
Samsung’s Customer Care Center in order to provide this service  
at no charge. If the warranty has expired on the device, charges  
may apply.  
Customer Care Center:  
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire  
agreement between you and Samsung relating to the Software  
and supersedes all prior or contemporaneous oral or written  
communications, proposals and representations with respect to  
the Software or any other subject matter covered by this EULA. If  
any provision of this EULA is held to be void, invalid,  
unenforceable or illegal, the other provisions shall continue in full  
force and effect.  
1000 Klein Rd.  
Plano, TX 75074  
Toll Free Tel: 1.888.987.HELP (4357)  
Samsung Telecommunications America, LLC:  
1301 East Lookout Drive  
Richardson, Texas 75082  
Precautions for Transfer and Disposal  
Phone: 1-800-SAMSUNG (726-7864)  
If data stored on this device is deleted or reformatted using the  
standard methods, the data only appears to be removed on a  
superficial level, and it may be possible for someone to retrieve  
and reuse the data by means of special software.  
Important!: If you are using a handset other than a standard numeric keypad,  
dial the numbers listed in brackets.  
Phone: 1-888-987-HELP (4357)  
To avoid unintended information leaks and other problems of this  
sort, it is recommended that the device be returned to Samsung’s  
Customer Care Center for an Extended File System (EFS) Clear  
which will eliminate all user memory and return all settings to  
©
2009 Samsung Telecommunications America. All rights  
reserved.  
166  
No reproduction in whole or in part allowed without prior written  
approval. Specifications and availability subject to change  
without notice.  
Warranty Information  
167  
Index  
Group Settings 71  
Managing Address Book Entries 72  
Service Dialing Numbers 74  
Address Book Settings 64  
Memo 135, 136  
Music Player 109  
Record Audio 131  
Stopwatch 138  
Tasks 136  
Timer 138  
Tools 130  
Using the Camcorder 87  
Using the Camera 82  
World Clock 138  
Navigator 121  
AT&T Music  
Music Apps 120  
Music Player 109  
Music Videos 119  
MusicID 117  
A
Accessing AT&T Music 109  
Adding a New Contact  
Adding More Fields 65  
Deleting Fields 66  
During a Call 67  
Idle Screen 64  
Address Book  
Alarms 132  
Answer Tones 78, 107  
Adding a New Contact 64  
Adding Pauses to Contact Numbers  
67  
Address Book Entry Options 69  
Checking the Used Space 74  
Copying an entry to the Phone 73  
Copying Entry to Phone 73  
Copying Entry to SIM Card 73  
Deleting all of the Address Book  
Entries 73  
AppCenter 103, 104  
Answer Tones 107  
Multimedia Store 107  
Options 108  
Ringtones 106  
Application Settings  
Calendar 60  
Reset 53  
Applications 103  
Alarms 132  
Calculator 136  
Calendar 133  
Dialing a Number 68  
Favorites 72  
FDN (Fixed Dialing Number) Mode  
Playing Music Through a Stereo  
Bluetooth Device 112  
70  
Converter 137  
Finding an Address Book Entry 68  
168  
 
Playing Music while Using the Phone  
112  
Playlists 113  
Shop Music 111  
Music Stores 111  
Transferring Music Windows Media  
Player 114  
Brightness 47  
Settings 128  
Business Card  
Manual Pause Dialing 21  
Missed Call Details 27  
Options During a Call 29  
Putting a Call on Hold 30  
attaching to a message 95  
Saving the Missed Call Number to  
Address Book 27  
C
Calendar 133  
Book 32  
Using the Speakerphone 31  
Viewing All Calls 26  
Viewing Missed Calls 26  
Camcorder 87  
Accessing the Video Folder 88  
Shooting Video 87  
Camcorder Options after a Video is  
Taken 88  
Accessing the Pictures Folder 86  
Camera Options 83  
Picture Folder 86  
Viewing an Event 134  
Call Functions 21  
3-Way Calling (Multi-Party Calling)  
32  
Address Book 23  
Adjusting the Call Volume 29  
Answering a Call 23  
Call Back Missed Call 27  
Call Waiting 32  
Correcting the Number 22  
Data Counter 29  
Deleting Missed Call 28  
Dialing a Recent Number 22  
Ending a Call 22  
International Call 21  
Making a Call 21  
XM Radio 118  
AT&T Navigator 103  
AT&T Social Net 103  
AT&T Yahoo! 97  
Audio 77  
Audio Folder 132  
B
Backlight Time 47  
Battery  
charging 7  
Installing 6  
Low Battery Indicator 8  
BellSouth 97  
Block Caller 26  
Bluetooth Device  
Stereo 112  
Taking Pictures 82  
169  
Camera Options  
Settings 84  
Shooting mode 84  
Timer 85  
White Balance 85  
Change Phone Password 51  
Changing Your Settings 39  
Charging battery 7  
Check PIN code 50  
Clear Phone Memory 61  
Cookies  
F
I
IMS Settings 59  
Changing the Status 70  
Creating New Numbers 70  
Fixed Dialing Mode 51  
G
Setting Up Your Phone 5  
Voice mail 9  
J
L
M
GPS Applications 123  
Graphics 107  
Make-UR-Tones 104, 119  
MEdia Net and WAP  
Changing WAP Profiles 128  
Downloading Multimedia Files 106  
Memory  
Emptying 127  
D
Digital Music Stores 111  
Display  
icons 14  
Adding an Entry 71  
Creating New Group 71  
Used Space 102  
E
Memory Card Installation 6  
Memory Management 61  
Clear Phone Memory 61  
Formatting the Memory Card 62  
Memory Card Details 62  
Used Space 62  
Entering Text 34  
Changing the Text Entry Mode 35  
Using 123Sym Mode 37  
Using Abc Mode 38  
Using Emo Mode 37  
Using T9 Mode 36  
Using T9 Mode in an Edit field 36  
H
HAC 152  
Health and Safety Information 140  
Menu Navigation 17  
170  
Messaging  
Creating and Sending Text  
Messages 93  
Settings 99  
Signing into Your Mobile Email 97  
Templates 101  
Types of Messages 93  
Using Message Options 96  
microSD card  
Mobile Web 104  
Browser 125  
Using Bookmarks 126  
MobiTV 104  
Exit 118  
Help me out 118  
Identify song 117  
MusicID 2 104  
Mute 30, 31  
My Stuff  
Answer Tones 78  
Audio 77  
Games 79  
MobiVJ 104  
M-Ratings 152  
Installing 6  
Mobile Banking 104  
Mobile Email 104  
AIM 97  
AOL 97  
AT&T Yahoo! 97  
Windows Live Mail 97  
Mobile Video  
Adding a Video Alert 91  
Customizing 91  
Menu 15  
Music 78  
Music File Extensions  
3GP 109  
AAC 109  
AAC+ 109  
eAAC+ 109  
M4A 109  
MP3 109  
Music 78  
Other Files 81  
Recorded Audio 78  
Shop Applications 105  
Tones 77  
Used Space 81  
Videos 80  
My-Cast Weather 104  
My Purchases 91  
Parental Controls 91  
Updating Favorites 91  
Video Categories 90  
MP4 109  
WMA 109  
Music Player 109  
Music Videos  
Music Video Options 119  
Viewing a Video Clip 119  
N
Configuration 58  
Network Selection 58  
171  
Video Share 59  
Shortcuts 19  
SIM card  
installation 5  
Sketchpad 135  
Speakerphone Key 31  
P
Q
Parental Controls  
Quick Reply 24  
QWERTY Keypad 34  
Configuring Filters 92  
Setup 92  
R
Password  
Changing 51  
Phone  
Front View 10  
icons 14  
Recent Calls 26, 135  
Record Audio  
Audio Folder 132  
Recorded Audio 78  
Swap 31  
Rear View 13  
Side View 12  
S
SAR values 140  
Switching On/Off 8  
Phone Information 63  
Phone Lock 50  
T-Coil 15  
Tones 77  
Alarms 132  
Calculator 136  
Calendar 133  
Camera 82  
Converter 137  
Memo 136  
Recent Calls 135  
Record Audio 131  
Stopwatch 138  
Service Dialing Numbers 74  
Phone Safety 151  
Phone Settings 48  
Playlists  
Address Book 60, 64  
Applications 59  
Call Settings 54  
Display and Light 45  
Phone 48  
Phone Information 63  
Security 50  
Adding songs to a Playlist 113  
Creating a Playlist 113  
Importing a Playlist from Windows  
Media Player 116  
Removing songs from a Playlist 113  
Powering  
Software Update 63  
Sound 39  
Off 8  
On 8  
Time & Date 47  
172  
Tasks 136  
Timer 138  
V
X
Y
XM Radio 104  
World Clock 138  
Touch Screen 9  
Lock/Unlock 9  
Transition Effect 47  
T-Ratings 152  
Travel Adapter 7  
Using 7  
Viewing a Video Clip 90  
Video Features 90  
IMS Settings 59  
In-Call 25  
Initiating and Receiving a Video  
Share Session 24  
Play a Recording 26  
Settings 59  
Yellowpages 104  
Yellowpages Mobile 75  
TTY Settings 139  
U
UL Certification 142  
Features of Your Phone 10  
Front View 10  
Videos 80  
From Another Phone 9  
Setup 9  
Rear View 13  
Side Views 12  
Voice Recognition 130  
Unmute 30  
W
Used Space 74, 81, 102  
Widgets 19  
Using Favorites  
Accessing a Website Using Favorites  
127  
Adding Favorites 127  
Deleting a Favorite 127  
Editing Favorites 127  
WikiMobile 104  
Windows Live Hotmail 97  
World Clock 138  
Deleting an Entry 138  
173  

Sony Xplod CDX R5515X User Manual
Seagate CONSTELLATION SAS ST9500431SS User Manual
SanDisk 4GBMicroSDHC User Manual
Samsung TS H663L User Manual
Samsung SGH Z800 User Manual
Samsung SCH I589 User Manual
Samsung Galaxy Tab 3 SMT210RGNYXAR User Manual
RCA CLOCK RADIO RP5620 User Manual
Pioneer PD F407 User Manual
Oricom WNS1 User Manual