Samsung Delve™
( S C H - R 8 0 0
P O R T A B L E
M O B I L E
S e r i e s )
D U A L - B A N D
P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
Printed in Korea.
Licensed by Qualcomm Incorporated under one or more of the following patents:
U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and
other patents pending.
®
Nuance , VSuite™ and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the
United States and/or other countries.
®
ACCESS and NetFront™ are trademarks or registered trademarks of ACCESS Co., Ltd. in Japan and other countries.
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
™
microSD and the microSD logo are Trademarks of the SD Card Association.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
®
1
2
FCC Hearing-Aid Compatibility (HAC) Regulations for
3
Section 2: Getting Started
This section explains how to start using your Samsung Delve
phone by activating your service, setting up your Voicemail, or
getting an understanding of how this manual is put together.
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
Understanding this User Manual
The chapters of this manual generally follow the same order as
the menus and sub-menus in your phone. A robust index for
select
Touch a menu item or screen item to launch, access,
or save a highlighted menu item or screen field of
interest.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 150.
➔
Used in place of “select” in long “drill down”
procedure steps.
Notes and Tips
Example: “...Settings
➔
Call Settings
➔
Call Answer...”
Throughout this manual some text is set apart from the rest. In
this way, important information, quick methods for activating
features, to define terms, and more are emphasized. The
definitions for these methods are as follows:
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate your warranty and may
cause damage.
•
•
•
Notes — Explain alternative options within the current feature, menu,
or sub-menu.
Tips — Provide quick or innovative methods for performing functions
related to the subject at hand.
Important — Points out important information about the current
feature that could affect performance, or even damage your phone.
Getting Started
4
Use the Travel Adapter
Important!: You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
The travel adapter included
with your phone is a
convenient, light-weight
charger that rapidly charges
your phone from any 120/220
VAC outlet.
Low battery indicator
The battery indicator (
) in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
•
•
•
Five bars (
) indicate a full charge.
1. Plug the large end of the Travel Adapter into a standard
An empty battery icon (
) indicates a near empty battery.
120 VAC or 220 VAC wall outlet.
A blinking empty battery icon (
) and a tone sounding indicate
Important!: For connection to an electrical supply not located in North
America, you must use an adaptor of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
you have two to three minutes before the battery is too low to operate
the phone.
If you continue to use your phone without charging its battery, the
phone will shut down.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
Correct
Install the Battery
Incorrect
Note: Your phone comes packaged with a partially charged rechargeable
2. Insert the smaller end of the Travel Adapter into the
charger/accessory connector at the bottom end of your
phone.
standard Li-Ion battery and travel adapter.
5
Remove the Battery
Important!: You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery. From fully
discharged to fully charged, the battery requires up to 4 hours of
charge time.
1. Press and hold the Power On/Off-LOCK key (
the top of your phone to turn it off (if on).
) on
2. Press down on the battery cover (1), slide the cover toward
the bottom end of the phone, then lift the cover (2) away
from the phone.
1. Insert the bottom end of the battery first, matching the
gold contacts on the inside of the battery to those on the
phone.
2. Press lightly on the top end of the battery down into the
3. Lift the battery up (1) and away (2) from the phone, top end
phone until it slips into place.
first.
3. Place the battery cover over the battery (1) and slide the
battery cover up into place (2).
Getting Started
6
Turn Your Phone On
1. Press the LOCK key (
the top of the phone.
phone, for two or more seconds. Your phone powers off.
Press
), on
Note: If your phone is on and you press
for less than one second, the
phone will not power off. This prevents your phone from being turned
off accidentally.
Note: As with any other radio-transmitting
device, do not touch the antenna (at the
bottom of the phone) while using your
phone as this can affect call quality and
can cause the phone to operate at a
higher power level than is necessary.
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
Note: Once your Voicemail account has been set up, you can use the
Voicemail folder (under the Message menu) to view details of voice
messages in your Voicemail box.
2. The phone begins searching for a
network signal.
3. Once the phone finds a signal, the
1. In standby mode, press the Dialer soft key, then press and
No Service icon (
line of the display changes to a
Signal Strength icon [( ) or (
4. You’re now ready to place and receive calls.
) in the top
hold
or dial your own mobile number and press
to dial Voicemail. (For more information, refer to
)].
2. Follow the prompts in the new user tutorial to setup your
mail box.
Note: If you are outside of your carrier’s coverage or roaming area, the No
Service icon (
) appears at the top of the phone’s display. If you
Listen to Voicemail
1. In standby mode, press the Dialer soft key, then press and
cannot place or receive calls, try later when service is available, or at
another location.
hold
or dial your own mobile number and press
Turn Your Phone Off
to dial Voicemail. (For more information, refer to
ᮣ
Press and hold the LOCK key (
), on the top of the
7
2. Make sure that the label side of the card is face up, as
shown, then carefully slide the memory card into the
memory card slot until you feel it click into place.
After connecting, you will hear your voice greeting.
2. You are prompted to enter your password.
3. Replace the microSD cover.
Memory Card (Optional)
Your phone has a memory card slot in the battery cavity, above
the battery. You can install a microSD card (up to 8GB) to
provide additional memory for storing files (such as, sound files
and photos) in your phone.
Remove a Memory Card
1. Open the microSD cover on the right hand side of the
TM
phone.
2. Carefully press the memory card inward until you feel it
Install a Memory Card
1. Open the microSD cover on the right hand side of the
phone, as shown.
release.
3. Slowly release your pressure on the card. It will slide
outward a short distance.
4. Remove the memory card from the memory card slot.
6. Replace the microSD cover.
Incorrect
Correct
Getting Started
8
Section 3: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that will be displayed
when the phone is in use.
Side Views of Your Phone
Features of Your Phone
•
•
•
•
Full-screen Touch Screen [high-resolution (240 x400 pixels), color]
Widget menu
Full-HTML Browser
Messaging (Text, Picture, Video, and E-mail) with QWERTY Touch
Keypad
•
•
•
•
•
•
•
•
2.0 Megapixel wide screen Camera-Camcorder
High speed data (CDMA 2000 1x Technology)
10
®
Bluetooth Stereo (v2.0) Wireless Technology (see Note)
Global Positioning (GPS) Technology
PIM Functions
11
12
Voice and Touch Keypad Dial
Music (MP3) Player and Video (MP4) Player
Memory Card slot (for optional microSD™ cards — up to 8 GB)
Features
1. Headset Connector — Used to connect an optional wired
headset or TTY device to your phone.
Note: The Delve™ phone supports the wireless hands free profile and the
serial port profile for Bluetooth® v2.0 wireless technology. The Delve
does not support Bluetooth OBEX profiles.
9
2. Power / Accessory Connector — Used to connect charging
accessories or any available accessory cables to your
phone.
8. Power On-Off/LOCK key — Turns the power on and off.
Locks and unlocks the keys and the touch screen and
lights the backlight.
3. Volume Key — Lets you adjust the ring volume in standby
mode, adjust the voice volume during a call, or mute the
ringer during an incoming call.
9. Memory Card Slot — Used to plug in an optional
microSD™ memory card for additional multimedia file
storage.
4. Send Key — Lets you place or receive a call. In standby
10. Voice Recognition Key — Used to launch VoiceSignal voice
mode, press the key once to access the Recent Calls log.
recognition system.
5. Clear Key — Deletes characters from the display when you
are in text entry mode. Press this key to return to the
previous menu or screen when navigating features on your
phone.
11. Camera Key — Launches the Camera-Camcorder feature
of your phone and takes pictures or records videos.
12. End Key — Ends a call. Returns you to standby mode from
any feature, function, or menu.
6. Display — Indicates the status of your phone (including
numbers dialed, feature and function screens, status
icons, message indicators and contents, signal strength,
and so on) and shows all touch controls (hot buttons,
keypads, and menus).
7. Earpiece / Speaker — Lets you hear ringing and alert
tones, alarm tones, and the other parties to calls.
Understanding Your Phone
10
2. Volume Key — Lets you adjust the ring volume in standby
mode, adjust the voice volume during a call, or mute the
ringer during an incoming call.
Front View of Your Phone
3. Display — Indicates the status of your phone (including
numbers dialed, feature and function screens, status
icons, message indicators and contents, signal strength,
and so on) and shows all touch controls (hot buttons,
keypads, and menus).
4. Send Key — Lets you place or receive a call. In standby
mode, press the key once to access the recent calls log.
5. Clear Key — Deletes characters from the display when you
are in text entry mode. Press this key to return to the
previous menu or screen when navigating features on your
phone.
6. Microphone — Lets the other caller hear you clearly when
you are speaking to them.
7. End Key — Ends a call. Returns you to standby mode from
any feature, function, or menu.
Features
8. Camera Key — Launches the Camera-Camcorder feature
1. Earpiece / Speaker — Lets you hear ringing and alert
tones, alarm tones, and the other parties to calls.
of your phone and takes pictures or records videos.
11
9. Voice Recognition Key — Used to launch VoiceSignal voice
Features
recognition system.
1. Camera Lens — The lens of your built-in camera.
Rear View
2. Mirror — Lets you position the Camera Lens to take self
portraits.
3. Battery Cover — Lets you access your phone’s battery.
4. Camera Key — Launches the Camera-Camcorder feature
of your phone and takes pictures or records videos.
Command Keys
Power On-Off/LOCK key
•
Press and hold the Power On-Off/LOCK key (
) to turn your
phone on or off.
•
With the phone keys and touch screen locked, press and hold the
Power On-Off/LOCK key ( ) to unlock the phone.
Note: With the phone locked, you can still answer incoming calls by pressing
the Talk key.
Volume Key
•
In standby mode, press the Volume key on the upper left side of the
phone Up or Down to adjust the volume of the incoming calls ringer.
•
When receiving a call, press the Volume key Up or Down to mute the
ringer.
Understanding Your Phone
12
•
•
During a call, press the Volume key Up or Down to adjust the voice
volume in the Earpiece-Speaker.
•
If you enter an incorrect character, briefly press
(and delete) the character.
to backspace
When playing a music file or video clip, press the Volume key Up or
Down to adjust the playback volume.
•
•
To erase the entire sentence, press and hold
To back up one menu level, briefly press
.
.
Soft Keys
End Key
•
Briefly press
once to disconnect a call.
to return to standby mode from any menu, or to cancel
Functions for the soft keys are defined by what appears above
each in the display. There are four soft keys across the bottom of
the display.
•
Press
the last input.
Send Key
Camera Key
The Send key (
recall the last number(s) dialed, received, or missed.
) is used to answer calls, dial calls, and to
Use the Camera key on the right side of the phone to launch the
Camera function on your phone by pressing and holding this key.
•
•
•
Press
Enter a number and briefly press
Briefly press in standby mode to display a list of recent calls
to and from your phone.
once to answer calls.
to make a call.
•
•
Press
Press
twice in standby mode to call the most recent number.
to pick up a waiting call. Press
again to switch
back to the other call.
Clear Key
The Clear key (
) is used to erase or clear numbers, text, or
symbols from the display. You can also use the key to return to a
previous menu or to return to standby mode from any menu.
13
5. Tapping the top line of the display pulls down a four-icon
Understanding the Display Screen
shortcut bar.
1. The top line of your
phone’s display contains
icons that indicate
network status, battery
power, signal strength,
connection type, and
more.
1
5
Note: To close the Widget bar, tap on the left arrow tab on the right edge of
the bar.
To close the shortcut bar, tap anywhere on the screen below the bar.
Display Screen Icons
2
4
Your Delve phone can show you definitions of the icons that
appear on the top line of the display.
2. Tapping the right arrow
tab on the left side of the
display opens the Widget
bar that lists available
shortcut widgets.
To access the Icon Glossary:
ᮣ
In standby mode, press Menu, then select Phone Info
➔
3
Icon Glossary. A list appears showing the icons that can
appear on the top line of the displays.
Dialogue Boxes
3. The bottom line of the display shows available soft keys.
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
The sample screen shows the following soft keys:
• Dialer — Launches the Dialer screen that lets you place calls.
• Contacts — Launches the Contacts list screen.
•
Choice
• Messages — Launches the Messages menu.
–
Example: “Save Message?”
• Menu — Launches the Main Menu.
•
Reconfirm
–
Example: “Erase All Messages?”
4. The center portion of the display shows information such
as call progress information, messages, and photos.
Understanding Your Phone
14
•
•
•
•
•
Performing
Example: “Sending...” “Connecting...”
Completed
Example: “Message Saved”
Information
Example: “New Message”
Error
Your Phone’s Modes
Call Answer Mode
–
You can choose to answer a call by pressing any key except
–
or
, or by pressing only the
key. (For
–
Input Mode
–
Example: “System Error!”
Input mode determines how you enter text, numbers, and
symbols. While at any text entry screen, press the down arrow in
the upper left corner of the screen, then select the input mode
from the drop-down menu. Optional input modes are:
Warning
–
Example: “Low Battery,” “Memory Full!”
Backlight
•
•
•
•
3X4Keypad (phone-style touch keypad)
QWERTY (full touch keypad — changes display to landscape mode)
Handwriting box (divided pallet)
The backlight illuminates the display. When you press any key or
open the phone, the backlight comes on. It goes off when the
screen and phone keys are not pressed within a period of time
set in the Backlight Time menu.
Handwriting full screen (undivided pallet)
Note: During a phone call, the display backlight dims and turns off after 10
seconds to conserve battery power, regardless of the Backlight Time
setting.
Tip: When using the 3X4Keypad mode, you can also choose between Abc
/
ABC T9 Word, and 123 by pressing the Entry Mode soft key.
,
Lock Mode
When the phone is in Lock Mode, restrictions are placed on
phone use. You can receive calls and messages, but cannot place
15
outgoing calls (except for emergency numbers) until you unlock
the phone. Lock Mode also restricts access to menus and the
Volume key.
•
When you press
after a call or from within a menu.
In standby mode, you will see the time, day, and date as well as
all phone status icons.
To enter Lock Mode:
Place Calls in Standby Mode
1. In standby mode, enter a phone number, and press
to place a call.
ᮣ
In standby mode, press
on the top of the
phone. The lock mode screen
appears momentarily in the
display, then the screen goes
dark.
2. Press
to return to standby mode.
Receive Messages in Standby Mode
While your phone is in standby mode, new incoming messages
automatically appear in the screen as they are received. Use the
Navigation key to scroll through text or to view complete images.
To exit Lock Mode:
ᮣ
While in Lock mode, press
and hold until the
Talk Mode
You can place and receive calls only when your phone is on.
While in a call your phone is in talk mode. During a call, a number
of option buttons are available in the call screen. (For more
standby mode screen
appears in the display.
Speakerphone Mode
During a call, you can place the Delve in Speakerphone mode,
allowing you to conduct your call hands-free and/or to share the
call with nearby people.
Standby Mode
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into standby mode:
•
To turn Speakerphone mode on, during a call, press
.
•
After you power the phone on.
Understanding Your Phone
16
Warning!: To avoid hearing damage, move the phone away from your ears
while in Speakerphone mode. (For more information, refer to
Note: The Volume key is on the left side of phone.
Adjust the Ringer
•
To turn Speakerphone mode off, end the call or press
.
To adjust the Ringer volume, while in standby mode, press the
Volume key up or down.
Enter/Exit Silent Mode
1. In standby mode, press the Volume key up or down to set
Silences the ringers, the alerts, and the tones your keypad makes
when you press a key.
the call ringer volume as desired.
Options are:
To enter Silent Mode:
ᮣ
In standby mode, press and hold the Volume key
• Silence all
• Alarm only
• Vibrate only
• 1 Beep
• Low/Medium
• Medium
• Medium/High
• High
(
) Down until “Sound off activated” appears in the
display.
• Low
To exit Silent Mode:
ᮣ
While in Silent mode and standby mode, press and hold
the Volume key ( ) Up until “Normal mode
2. When you are satisfied with the setting, release the Volume
key. Your phone returns to standby mode.
activated” appears in the display and the original ringer
Note: The Vibrate icon ( ) appears in the display when the phone is in
value appears.
Vibrate mode. The No Ring icon (
) appears in the display when the
phone is in Silence All mode.
Vibrate Mode
Music Player Mode
ᮣ
In standby mode, repeatedly press the Volume key
(
) down until “Vibrate only” appears in the
The Music Player in your phone can play music files (MP3, CMX,
Midi, AAC, AAC+, and eAAC+), but only if they are stored in the
My Music folder on an optional microSD™ Memory Card.
display.
17
Camcorder Mode
Camcorder mode lets you record videos with your phone’s
camera. In Camcorder mode, you can also adjust the resolution
and appearance of your videos.
•
Entering Music Player Mode:
In standby mode, press the Menu soft key, then select
Multimedia Music Player
ᮣ
➔
.
•
Entering Camcorder Mode:
–
In standby mode, press and hold the Camera key (
right side of the phone.
) — on the
Camera Mode
–
In Camera mode, press the Mode button (
).
key.
Camera mode lets you take pictures with your phone’s camera.
In Camera mode, you can also adjust the resolution and
appearance of your pictures.
•
Exiting Camcorder Mode — Press the
Video Player Mode
The Video Player in your phone can play video files [3GS, MP4,
H.263, and H.264 (Decoding : QCIF Only)], but only if they are
stored in the My Video folder in the phone or on an optional
microSD™ Memory Card.
•
Entering Camera Mode:
–
In standby mode, press and hold the Camera key (
) — on the
right side of the phone.
– Or –
–
In Camcorder mode, press the Mode button (
).
•
Entering Video Player Mode:
•
Exiting Camera Mode — Press the
key.
1. In standby mode, press the Menu soft key, then select
Multimedia
➔
My Videos.
– or –
Understanding Your Phone
18
In camcorder mode, press the Gallery soft key.
A list of thumbnail images with their file names appears in
the display.
2. Select the desired video. The Video Player screen appears
in the display and begins playing the highlighted video.
19
Section 4: Call Functions
This section explains how to make or answer a call. This section
also includes the features and functionality associated with
making or answering a call.
1. In standby mode, press the Dialer soft key. The touch
keypad screen appears in the display.
2. Enter 911 using the touch keypad.
Making a Call — Number
Entry Dialing
3. Press
or the Voice Call soft key to place the call.
1. In standby mode, press the
Dialer soft key. The touch
keypad screen appears in the
display.
Important!: Emergency number 911 is preset into your phone. You can dial
this number almost any time, even when the phone is locked or
restricted.
If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
2. Enter the number you wish to
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
call using the touch keypad.
3. Press
or the Voice
Call soft key to place the call.
Dialing Emergency Numbers
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
When you call an Emergency Number, such as 911, your phone
locks itself in emergency mode, only allowing you to make calls
to the emergency call center you originally contacted. This
enables emergency operators to more easily dispatch aid, such
as police, fire fighting, and emergency medical personnel.
Note: You can specify other numbers than 911 as emergency numbers using
Call Functions
20
Manual Pause Calling
Tip: You can create pauses longer than two seconds by entering multiple T
Pauses.
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
4. Select the desired pause option. The respective letter (T or
P) is added to your number entry.
5. Press
or the Voice Call soft key to call the number.
•
T Pause — A two-second pause stops the calling sequence for two
seconds and then automatically sends the remaining digits.
P Pause — A hard pause stops the calling sequence until you press
.
Making a Call — Contact
Dialing
You can store phone numbers and
contact names in your phone’s
Contacts list. To call one of your
contacts, do the following:
•
To manually call a number with pause(s) without storing it to your
Contacts:
1. In standby mode, press the Dialer soft key. The touch
1. In standby mode, press the
Dialer soft key. The touch
keypad screen appears in the
display.
keypad screen appears in the display.
2. Enter the number you wish to call.
3. Press the Add Pause soft key.
A pop-up menu containing the following options appears in
the display:
2. Press the Contacts button
(
). The Contacts list
•
•
T Pause — a two-second pause.
appears in the display.
P Pause — a hard pause (awaits input from you).
3. Select the desired Contacts entry’s radio button. A blue dot
appears in the button.
21
If the selected Contacts entry
has more than one number,
the entry’s information
phone’s Contacts list and assigned Speed Dial numbers 002
through 009 by pressing and holding a single key.
Example: For Speed Dial number 003, press the Dialer soft key, then press
and hold
until the name and number appear in the display and
appears in the display.
the number is dialed.
•
Select the number you wish to
dial.
Two-Touch Dialing
4. Press the Add soft key.
Memory locations 010 through 030 are special Two-Touch
dialing locations.
5. The selected Contact’s
number appears in the Dialer
screen.
Example: For Speed Dial number 013, press the Dialer soft key, then briefly
press
, then press and hold
until the name and number
appear in the display and the number is dialed.
6. To call the number, press the
Voice Call soft key or press
.
Pause Dialing From a Contacts Entry
•
If you speed dial a contact that contains two-second (T) pause(s)
simply wait for the pauses to pass and the dialing to complete.
Making a Call — Speed Dialing
Speed Dialing lets you quickly and easily dial any contact in your
Contacts list by using that contact’s Favorites number in the list.
You can assign and change Favorites (speed dial) numbers for
•
If you speed dial a contact that contains hard (P) pauses, wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and press
continue your dialing sequence.
to
One-Touch Dialing
Speed Dial numbers 002 through 009 are special One-Touch
dialing numbers. You can call the phone numbers stored in your
Call Functions
22
3. Speak clearly and say the name of a person in your
Making a Call — Voice Dialing
Contacts list, first name followed by last name.
Your Delve mobile phone includes state-of-the-art voice
recognition software that lets you dial numbers using your voice.
If the name is recognized, Voice Dial repeats the name and
dials the number.
Using Voice Dial
Use the Voice Dial command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Voice Dial to dial any valid telephone number,
even numbers not stored in your contact list, by speaking the
individual digits in the number (Digit Dialing).
If Voice Dial is not sure which name you said, it prompts
you with “Call?” followed a choice list of up to three
names.
4. Do one of the following:
Voice Dialing Tips:
•
•
•
•
•
Press one of the name buttons.
•
•
Wait for the beep before speaking.
Say “Yes” to confirm the first name.
Say “No” to hear the next name.
Speak clearly at a normal volume, as if you were talking to someone
on the phone.
Say “Repeat” to hear the names again.
Say “Cancel” to exit Voice Service without dialing.
•
When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1. In standby mode, press the Voice Recognition key (
).
If the recognized/selected name has multiple numbers
stored for it (that is, Home, Work, Mobile, and so on), Voice
Dial displays the possible choices and prompts you with
“Which number?”
“Say a Command” appears in the display and is
pronounced through the earpiece.
2. Say, “Call”. You are prompted to “Say the name or #”.
5. Say one of the following number types:
23
•
•
•
“
Home
Work
Mobile
”
•
•
•
Say “No” to hear the next number.
“
”
Say “Repeat” to hear the numbers again.
Say “Cancel” to exit Voice Service without dialing.
“
”
Voice Dial dials the specified number.
Dialing a Number
Pause Dialing From a Contacts Entry
To dial a number using Voice Dial, do the following:
•
If you voice dial a contact that contains (hard waits) P Pauses(s), wait
for the appropriate prompt(s) from the number you are calling (credit
card number, bank account number, and so on) and enter the
appropriate response(s).
1. In standby mode, press the Voice Recognition key (
).
“Say a Command” appears in the display and is
pronounced through the speaker.
•
If you voice dial a contact that contains (two-second) T Pause(s) simply
wait for the pauses to pass and the dialing to complete.
2. Say “Call”. VoiceSignal prompts you to “Say the name or
#”.
Answering a Call
3. Speak clearly and say the telephone number of the person
Your phone notifies you of a call in the following ways:
you want to call. For example, say “7 8 1 9 7 0 5 2 0 0."
•
A ring tone sounds and/or your phone vibrates (Your phone provides
If it recognizes the number, Voice Dial repeats and dials the
number. If Voice Dial is not sure it has recognized the
number, it displays and prompts you with “Call?” followed
by a choice list of up to three numbers.
eight ring volume settings including: Silent all
,
Alarm only
,
Vibrate
only 1 Beep Low Low/Medium Medium
,
,
,
,
,
Medium/High, or
High, and/or different ring types to distinguish callers.)
•
•
A phone number (unless blocked by the caller) and a name appear in
the display (If the caller’s number and name are stored in your
Contacts list).
4. Do one of the following:
•
•
Press one of the number buttons.
If the caller can’t be identified, Call from unavailable#
,
Call from
Say “Yes” to confirm the first number.
restricted number, or no number appears in the display.
Call Functions
24
•
Your phone continues to notify you of the call until one of the following
events occurs:
Calls Log
The Calls log retains information about Outgoing, Incoming, and
Missed calls. You can also view times for your last call and the
time totals for all calls.
•
•
•
•
You answer the call.
You ignore the call.
The calling party ends the call.
The call is sent to voicemail.
Review the Calls Log
1. In standby mode, press the
Menu soft key, then select
Calls. The Calls list appears
in the display showing All
calls.
Answering an Incoming Call
ᮣ
Press the
key. The ring tone and/or vibration stop
and the caller’s voice can be heard in the earpiece.
Tip: You can set your phone to answer calls automatically or when you press
any key but
2. Select the Down arrow in the
upper right corner of the
screen. The following Calls
log options appear in a drop-
down menu:
Ignoring a Call
When you ignore an incoming call, the call is immediately
forwarded to your voice mail.
ᮣ
During an incoming call, press the
is forwarded to your voice mail.
key. The caller
•
•
•
•
All
Incoming
Outgoing
Missed
Adjusting the Call Volume
ᮣ
In standby mode, repeatedly press the Volume key Down
until the Call Volume Level desired appears in the display.
The Volume key is on the left side of phone.
• Data
25
Note: To review your Delve’s Call Timers or Data Counters, press the Call
Note: In standby mode, you can quickly view your most recent calls of all
Timer soft key or the Data Counter soft key.
types by briefly pressing
. A list containing up to 270 of your
most recent outgoing, incoming, and missed calls appears in the
display.
3. Select the Calls log that you wish to review.
1. In standby mode, press the Menu soft key, then select
Calls. The Calls list appears in the display showing All
calls.
Note: In cases where a Calls log entry concerns a call to or from a Contacts
entry, the Contact name associated with the number appears in the
Calls log list instead of the number.
4. The following functions are also available:
2. Select the Down arrow in the upper right corner of the
screen, then select Outgoing. A list of Outgoing Calls
appears in the display.
• Dialer — Press this soft key to launch the Dialer screen and place
a call.
• Erase — Press this soft key to delete selected or All unlocked calls
from the displayed call log.
3. Select a call to view further
information about it. The call
information screen shows the
recipient’s name (Contacts
only), the number dialed, the
time and date the call was
made, and the duration of the
call.
• Lock Unlock — Press this soft key to block/permit deletion of
/
individual calls.
• Call Timer — Press this soft key to list the duration of the Last Call;
total durations of all Outgoing Calls, Incoming Calls, Roaming Calls,
All Calls since the timers were last reset; the date and time the
timers were last reset; and the total duration of Lifetime Calls (all
calls since your phone was activated — this timer cannot be reset).
Outgoing Calls
Your phone retains information about the last 90 outgoing calls
and stores them in the Outgoing calls log. You can review the
Outgoing calls log for the time and date of a call, as well as other
information.
4. The call information screen
offers the following options:
Call Functions
26
•
•
— Press to dial this number.
Incoming calls log for the time and date of the call, as well as
other information.
— Press to send a Text, Picture, or Video message to this
1. In standby mode, press the Menu soft key, then select
Calls. The Calls list appears in the display showing All
calls.
•
•
•
•
•
To add the number to your Contacts list, press the Add To Contacts
soft key.
2. Select the Down arrow in the upper right corner of the
screen, then select Incoming. A list of Incoming Calls
appears in the display.
Contacts only — To view Contact information for this call, press the
View details soft key.
To delete the selected call from your Outgoing calls log, press the
Erase soft key.
3. Select a call to view further
information about it. The call
information screen shows the
caller’s name (Contacts only),
the number called received
from, the time and date the
call was received, and the
duration of the call.
To block / permit deletion of the selected call, press the Lock
Unlock soft key.
/
To copy this number to the Dialer screen so that you can make
changes (such as, to add Pauses) before reuse, press the Copy to
dialer soft key.
Note: When viewing an outgoing call to a Contact, press the More soft key to
access the Lock Unlock and Copy to dialer options.
/
5. To review another Outgoing call, press the Left and Right
arrow keys at the top of the screen.
4. The call information screen
Incoming Calls
offers the following options:
•
— Press to dial this
Your phone retains information about the last 90 Incoming calls
and stores them in the Incoming calls log. You can review the
number.
27
•
— Press to send a Text, Picture, or Video message to this
1. In standby mode, press the Menu soft key, then select
Calls. The Calls list appears in the display showing All
calls.
•
•
•
•
•
To add the number to your Contacts list, press the Add To Contacts
soft key.
2. Select the Down arrow in the upper right corner of the
screen, then select Missed. A list of Missed Calls appears
in the display.
Contacts only — To view Contact information for this call, press the
View details soft key.
To delete the selected call from your Incoming calls log, press the
Erase soft key.
3. Select a call to view further
information about it. The call
information screen shows the
caller’s name (Contacts only),
the number called received
from, the time and date the
call was received, and the
duration of the call.
To block / permit deletion of the selected call, press the Lock
Unlock soft key.
/
To copy this number to the Dialer screen so that you can make
changes (such as, to add Pauses) before reuse, press the Copy to
dialer soft key.
Note: When viewing an incoming call from a Contact, press the More soft key
to access the Lock Unlock and Copy to dialer options.
/
5. To review another Incoming call, press the Left and Right
4. The call information screen
arrow keys at the top of the screen.
offers the following options:
Missed Calls
•
— Press to dial this
number.
Your phone retains information about the last 90 missed calls
(calls that were never picked up) and stores them in the Missed
calls log. You can review the Missed calls log for the time and
date of the call, as well as other information.
•
— Press to send a Text, Picture, or Video message to this
Call Functions
28
•
•
•
•
•
To add the number to your Contacts list, press the Add To Contacts
2. Select a call to view further information about it. The call
information screen shows the caller’s name (Contacts
only), the number called (by), the time and date the call
was made / received, and the duration of the call.
soft key.
Contacts only — To view Contact information for this call, press the
View details soft key.
To delete the selected call from your Missed calls log, press the
Erase soft key.
3. The call information screen offers the following options:
To block / permit deletion of the selected call, press the Lock
Unlock soft key.
/
•
•
— Press to dial this number.
— Press to send a Text, Picture, or Video message to this
To copy this number to the Dialer screen so that you can make
changes (such as, to add Pauses) before reuse, press the Copy to
dialer soft key.
•
•
•
•
•
To add the number to your Contacts list, press the Add To Contacts
soft key.
Note: When viewing a missed call from a Contact, press the More soft key to
access the Lock Unlock and Copy to dialer options.
/
Contacts only — To view Contact information for this call, press the
View details soft key.
5. To review another Incoming call, press the Left and Right
To delete the selected call from your Calls log, press the Erase soft
key.
arrow keys at the top of the screen.
To block / permit deletion of the selected call, press the Lock
Unlock soft key.
/
All Calls
You can review all of the calls log entries (outgoing, incoming,
and missed calls) for the time and date of a call, as well as other
information.
To copy this number to the Dialer screen so that you can make
changes (such as, to add Pauses) before reuse, press the Copy to
dialer soft key.
1. In standby mode, press the Menu soft key, then select
4. To review another call, press the Left and Right arrow keys
Calls. The Calls list appears in the display showing All
at the top of the screen.
calls
.
29
Data Calls
•
•
To block / permit deletion of the selected call, press the Lock
/
Unlock soft key.
You can review all of the data calls log entries for the time and
date of a call, as well as other information.
To review the amounts of data Transmitted, Received, Total
exchanged since the last time the counters were reset, the date
and time the counters were last reset, and the Lifetime data count,
press the Data Counter soft key.
1. In standby mode, press the Menu soft key, then select
Calls. The Calls list appears in the display showing All
calls.
5. To review another Data call, press the Left and Right arrow
keys at the top of the screen.
2. Select the Down arrow in the upper right corner of the
screen, then select Data. A list of Data Calls appears in the
display.
Call Timer
View the duration of your last call, total calls, and calls made
during the life cycle of you phone using the Call Timer feature.
3. Select a call to view further
information about it. The call
information screen shows the
the number called or called
by, the time and date the call
was placed or received, and
the duration of the call.
Note: Call Timer is not for billing purposes.
1. In standby mode, press Menu ➔ Calls.
2. Press the Call Timer soft key. The following options appear
in the display:
•
•
Last Call — View the duration of your last call.
Outgoing Calls — View the duration of the total outgoing calls
made on your phone since all timers were last reset.
4. The call information screen
offers the following options:
•
•
Incoming Calls — View the duration of the total incoming calls
•
To delete the selected call from
your Data calls log, press the
Erase soft key.
received on your phone since all timers were last reset.
Roaming Calls — View the total calls duration on your phone
while roaming since all timers were last reset.
Call Functions
30
•
All Calls — View the duration of the total call, incoming, outgoing,
3. Press the Data Counter soft key. The following options
and data calls made on your phone since all timers were last reset.
appear in the display:
•
•
Last Reset — View the time and date all timers were last reset.
•
•
•
Transmitted — View the total amount of data transmitted by your
Lifetime Calls — View the number and total duration of all calls
since your phone was activated.
phone since the last reset.
Received — View the total amount of data received by your phone
since the last reset.
3. Press the Reset soft key to reset all counters except
Lifetime Calls.
Total — View the total amount of data sent or received by your
phone since the last reset.
Note: Although Total Calls timers can be erased, the Lifetime Calls timer can
•
•
Last Reset — View the time and date all timers were last reset.
never be erased.
Lifetime Data Counter — View the total amount of data sent or
received by your phone since activation (Lifetime Data Counter
cannot be reset).
Data Counter
View the amount of Transmit data, Receive data, and Total data
transmitted or received since the last time you reset the data
counters, and the Lifetime amount of data transmitted or
received.
4. Press the Reset soft key to reset all counters except
Lifetime Data Counter.
Note: Although Total data counters can be erased, the Lifetime Data Counter
can never be erased.
Note: Data Counter is not for billing purposes.
Roaming
What is Roaming?
1. In standby mode, press Menu ➔ Calls.
2. Select the Down arrow in the upper right corner of the
screen, then select Data. A list of Data Calls appears in the
display.
Roaming lets you use your phone when you travel outside of your
Wireless Provider’s coverage area. The Roaming icon (
appears in the top line of the display when Roaming is active,
and extra charges may apply when making or receiving calls.
)
31
Note: Some features may be unavailable while roaming. Roaming also
consumes additional power from the battery requiring more frequent
recharging. Contact your Wireless Provider for more information about
Roaming.
How Roaming Works
Roam Option lets you set roaming preferences if you move in and
out of your home network. The following roaming options are
available:
•
Home Only — Your phone is available for normal operation only in the
designated coverage area.
•
Automatic — Your Wireless Provider’s Preferred Roaming List (PRL) of
networks is used to acquire service. If no preferred networks are
found, any digital system is acquired.
Call Functions
32
Section 5: Menu Navigation
This section explains the menu navigation for your phone. It also
describes the menus available with your phone.
Widget Bar Shortcuts
1. In standby mode, press the
right arrow tab on the left
edge of the display. The
Widget Bar slides open to the
right and lists icons for those
Widgets selected in the
Menu Navigation
Access menus using the Menu soft
key, other soft keys, or icons on the
Widget Bar or Shortcut Bar.
1. In standby mode, press the
Menu soft key. The Main
Menu appears in the display.
2. Select icons or menu options
to access a menu or sub-
2. Scroll through the Widget list
menu shown in the display.
by pressing and sliding within the Widget Bar until a
desired Widget icon appears.
Return to the Previous Menu
Press
to return to the previous menu.
33
3. Press, hold, and slide the icon
to the right until it is free of
the Widget Bar. The icon now
displays on the standby
The In-Use Options
Access numerous menus and
features even while in a call.
Note: If the call is disconnected while
accessing the In-Use Option, the In-
Use Option disappears from the
display and the phone eventually
returns to standby mode.
screen and expands in size.
Note: You can position a Widget icon as
needed by pressing, holding, and
sliding it.
1. While in a call, the following
buttons and soft keys appear
in the display:
4. Select a Widget icon on the
standby screen to launch its
function.
Note: You can return a Widget icon to the Widget Bar simply by pressing,
Turns Speakerphone mode On/Off. (For more
holding, and sliding the icon until it overlaps the Widget Bar.
5. Close the Widget Bar by pressing the left arrow tab.
With Bluetooth on and a Bluetooth headset
connected with your Delve, switches the call
sounds to the Bluetooth Headset.
Menu Navigation
34
•
Add To Contacts — Lets you add the other party’s number to your
Contacts list.
With Bluetooth on and a Bluetooth headset
connected with your Delve, switches the call
sounds from the Bluetooth Headset and back to
the phone.
Using Widgets
Widgets are special icons that you can use to launch particular
phone features and functions or to quickly access particular
Internet addresses. You can initially access the widgets on your
Delve phone by displaying the Widget Bar.
Mutes/unmutes the microphone on your Delve.
Allows you to speak to someone else without
being overheard by the other party on your call.
Widget Bar
The Widget Bar is an easily accessed list of widgets that acts like
a menu or storage bay for your widgets.
Opens the Memo Pad. (For more information,
1. To open the Widget Bar, tap the folder tab located on the
left side of the standby screen. The Widget Bar slides open
to the left, revealing the currently available widgets.
Launches the Voice Memo Recorder. (For more
Tip: You can hide or display individual widgets by changing the Widget
Ends the current call and returns the Delve to
Standby mode.
2. To close the Widget Bar, tap the folder tab again.
Soft Keys
The following soft keys are available during a call:
•
Dialer — Opens the Dialer screen to enable you to place another call
while the current call remains active.
•
•
Contacts — Opens the Contacts list screen.
Messages — Launches the Messages menu.
35
Section 6: Understanding Your Contacts
This section explains how to manage your daily contacts by
storing their name and number in your Contacts. Contacts entries
can be sorted by name.
2. To find a Contact, select the Search field. The 3X4 Keypad
screen appears in the display.
•
Enter the first few letters of the Contact’s name. A list of Contacts
with names matching the letters you entered appears below the
Search field.
Your Contacts List
Your Contacts list can store up to 500 entries, with each contact
having up to five associated phone numbers, an e-mail address,
and a picture ID.
•
Select the desired Contact to display it’s information.
Adding a New Contacts Entry
Each phone number can be up to 32 digits in length, including
hard pauses. Contact names can be up to 32 characters in
length. You can also specify a memory location for each entry,
and you can restrict access to the Contacts list to prevent
unauthorized use.
You can add an entirely new entry to your Contacts list or add
information to an existing entry.
Using the Contacts Add Option
1. In standby mode, press the Contacts soft key. The Contacts
screen appears in the display.
Tip: One-Touch and Two-Touch Dialing allow you to call numbers stored in
your Contacts list faster. (See page 22.)
Note: In standby mode, press the Menu soft key and select Contacts
.
Open Your Contacts List
2. Press the New Contact soft key. The New Contact screen
1. In standby mode, press the Contacts soft key. The Contacts
screen appears in the display.
appears in the display.
Note: In standby mode, press the Menu soft key and select Contacts
.
Understanding Your Contacts
36
3. Select the Name field. The
3X4 Keypad text entry screen
appears in the display.
7. If desired, assign the new
Contact to a Group. This lets
you send messages to and
find this Contact and other
related contacts. (For more
•
If desired, select another text
entry screen. (For more
information, refer to “Changing
4. Enter a name or phrase to
associate with the new
•
Select the General field. The
Select Group screen appears in
the display. The following groups
are available:
–
–
–
–
–
New Group
Family
Friends
5. Select a phone number field (Mobile Mobile 2, Home, Work,
,
Colleagues
Business
or Fax) or the e-mail address (E-mail) field. The 3X4
Keypad text entry screen appears in the display.
•
Select the preferred group. A message pops-up confirming the
group assignment for this Contact.
•
If desired, select another text entry screen. (For more information,
8. If desired, select a unique Ringtone or voice memo file to
37
9. If desired, enter an additional phone number (Mobile 2
Home Work, or Fax) or e-mail address (Email) for the new
Contacts entry.
,
• Update existing — Lets you add the number or e-mail address
you just entered to an existing Contacts entry.
,
Tip: You can also store a phone number from standby mode by entering the
number, and pressing the Save soft key.
10. If desired, select an identifying image by highlighting the
photo ID field and pressing the Set soft key. The My Images
screen appears in the display. (For more information, refer
Creating a new Contacts entry:
3. Select Add New Contacts. The New Contact screen appears
in the display with the number you’re saving populating
the Mobile field.
11. To save the new Contacts entry, press the Save soft key.
4. To save the number as other than the first Mobile number,
Saving a Number from a Call
press the button (
) The following (number type) icons
Once you’ve finished a call, you can save the number of the
caller to your Contacts list.
appear in the display:
Mobile
Fax
Home
Work
Note: If the call was incoming and Caller ID information was unavailable,
then the Save option is also unavailable.
1. After you press
to end your call, the call time,
length of call, phone number, and name of the other party
(if available) appear in the display.
5. Select the number type that matches your new entry. The
New Contact screen appears in the display with the
number being save populating the selected number type
field. (For more information on creating a new Contacts
2. Press the Add To Contacts soft key. The Add To Contacts
screen appears in the display showing the following
options:
• Add New Contacts — Lets you create a new Contacts entry.
Understanding Your Contacts
38
Adding the number to an existing Contacts entry:
6. Select Update Existing. The
Contacts screen appears in
9. Select the appropriate unassigned number type. The
Contact screen appears in the display.
10. Make any added changes you wish to the Contacts entry.
the display showing your
current Contacts list.
7. Select the Search field and
enter the first few characters
of the Contacts entry name
under which you will store the
saved number. (For more
11. To save the Contacts entry, press the Save soft key.
Storing Number from a Calls Log
You can store numbers from the Calls logs to your Contacts.
1. In standby mode, press the Menu soft key, then select
Calls. The Calls list appears in the display showing All
calls.
information on finding a
2. Select the Down arrow in the upper right corner of the
screen. The following Calls log options appear in a drop-
down menu:
8. Select the desired Contacts entry. The following (number
type) icons appear in the Update Existing screen:
•
•
•
•
•
All
Mobile
Fax
Home
Work
Incoming
Outgoing
Missed
Data
3. Select the Calls log that you wish to review.
39
4. Select the number you wish to store in your Contacts list.
The associated Call Information screen appears in the
display.
“Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Lookup”.
5. Press the Add To Contacts soft key. The Add To Contacts
screen appears in the display showing the following
options:
VoiceSignal prompts you to “Say the name or #.”
3. Speak clearly and say the full name of the person you want
to call, exactly as it is entered in your contact list.
• Add New Contacts — Lets you create a new Contacts entry.
•
If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
• Update Existing — Lets you add the selected number to an
existing Contacts entry.
•
If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “Did you say?” followed by the first name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
Finding a Contacts Entry
Voice Method
Use the VoiceSignal Contacts command to view contact
information for any named contact stored in your Contacts list by
saying the name.
•
•
To say the name again, press the Repeat soft key.
To exit VoiceSignal without dialing, press
.
Note: The Contacts command shows the requested contact information in
5. The contact information for the name you selected appears
the display but does not dial any phone numbers for the contact.
in the display.
To look up information for a specific contact:
1. In standby mode, press the Voice Recognition key (
).
Understanding Your Contacts
40
Group
Keypad Methods
Find by Name
This option lets you find a Contacts
list entry with a specific Group
name.
If you have stored a named contact in your Contacts list, Find lets
you locate the entry quickly.
1. In standby mode, press the
Contacts soft key. The Contacts
screen appears in the display
with an alphabetical list of
Contacts showing.
1. In standby mode, press the Contacts soft key. The Contacts
screen appears in the display with an alphabetical list of
Contacts showing.
2. Select the Search field and enter the first few characters of
the name of the contact as it appears in your Contacts list.
2. Press the Down arrow button
at the top right corner of the
screen.
Example: If you saved a contact name as “Amy Smith”, begin your search for
that contact by pressing
for “A”.
3. Select the Groups option. The
Note: As you enter letters, the entry names of the closest matches (thus far)
appear in the display.
Groups screen appears in the display.
3. When the desired Contacts entry is listed in the display, do
4. Select the group you wish to browse. The selected Group
one of the following
list appears in the display.
•
•
To dial the number associated with the named Contact, press
.
5. Do one of the following:
To change the information about the Contact, select the Contact
entry and press the Edit soft key.
•
To add an existing contact entry to the Group, press the Add
Member soft key.
•
To delete a contact from the Group, press the Remove member
soft key. (Does not apply to the General group.)
41
•
•
To rename the Group, press the Rename soft key.
6. When you’re finished editing the entry, press the Save soft
key. Your changes are saved and a confirmation message
appears in the display.
To remove this Group and return all its members to the General
group, press the Erase soft key.
•
To send a text or picture message to selected Contact(s) in the
Adding Pauses to Contacts Numbers
current Group, press
.
6. Select the desired option to enter that option’s sub-menu.
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
Editing an Existing Contact Entry
Once stored in the Contacts, an entry can be changed quite
easily.
•
P pause — A hard pause stops the calling sequence until further input
from you.
•
T pause — A two-second pause stops the calling sequence for two
seconds and then automatically sends the remaining digits.
2. Press the Edit soft key. The Edit Contact screen appears in
the display with the contact name highlighted.
Tip: You can enter multiple two-second pauses to extend the length of a
pause. For example, two consecutive two-second pauses cause a total
pause time of four seconds.
3. Highlight a number stored in this contact entry.
4. To backspace and delete numbers, press
.
Note: Keep in mind that pauses count as digits towards the 32-digit
5. To clear all numbers in the highlighted field, press and hold
maximum.
.
Store Pauses in a New Contacts Entry
Note: You can also add numbers (such as a second Mobile number or a Fax
1. In standby mode, enter the number you wish to store (such
as your bank’s teleservice number).
number) to the entry, assign it to a Group, and add other information.
Understanding Your Contacts
42
2. Press the Add Pause soft key.
The following menu options pop-up in the display:
• P pause — Adds a hard pause (awaits input from you).
• T pause — Adds a two-second pause.
The following menu options pop-up in the display:
• P pause — Adds a hard pause (awaits input from you).
• T pause — Adds a two-second pause.
6. Select the pause option of your choice to enter it into your
number sequence.
3. Select the pause option of your choice to enter it into your
number sequence.
7. Press the Done soft key.
4. When you’re finished entering the number and pauses,
8. When you’re finished entering pauses, press the Save soft
key to save your changes to the number in your Contacts
list.
press the Save soft key to store the number in your
Contacts
.
Add Pauses to an Existing Contacts Entry
Add a Number or Email Address to an Existing Entry
2. Press the Edit soft key. The Edit Contact screen appears in
2. Press the Edit soft key. The Edit Contact screen appears in
the display with the contact name highlighted.
the display with the contact name highlighted.
3. Highlight a number stored in this contact entry.
3. Highlight a number field or the Email field in this Contacts
entry.
4. Use the Left and Right navigation keys to place the cursor
where you want to add a pause (usually at the right-hand
end of the number).
4. Enter the phone number or e-mail address for the new
Contacts entry.
5. Press the Add Pause soft key.
43
5. Press the Done soft key to add the number or Email
Speed Dial Numbers
address to the existing entry.
You can assign and change Speed
Dial numbers for Contacts entries.
Edit an Existing Email Address
Assigning a Speed Dial Number
1. In standby mode, press the
Dialer soft key, then press the
Favorites button (
). The
2. Press the Edit soft key. The Edit Contact screen appears in
Favorites list appears in the
the display with the contact name highlighted.
display.
3. Highlight the E-mail field (labeled with the @ symbol).
Tip: To scroll the Favorites list, press the Volume key (on the left side of the
phone) Up or Down.
•
•
To insert the @ symbol, press the Symbols soft key and press
@.
To add the domain type to the end of the Email address, press the
Shortcuts soft key, then select the desired domain type (.com, .net,
.org, .gov).
5. Press the Done soft key to enter your changes, then press
the Save soft key to save them.
Understanding Your Contacts
44
2. Select a Speed Dial number.
The Contacts screen appears in
the display.
Changing Speed Dial Numbers
1. In standby mode, press the
Dialer soft key, then press the
Favorites button (
). The
3. Find and select a Contact entry.
selected Contact’s check
circle.
Favorites list appears in the
display.
2. Press the Change Order soft
key. The Favorites list changes,
as shown.
Note: The Voicemail favorite (1) is
deactivated to prevent you changing it.
4. Press the Add soft key. You are
returned to the Favorites
Tip: To scroll the Favorites list, press the Volume key (on the left side of the
screen with the newly assigned
Contact showing.
phone) Up or Down.
45
3. Press and drag one or more
Contacts to other Favorites
positions.
Removing Speed Dial Numbers
1. In standby mode, press the
Dialer soft key, then press the
Favorites button (
). The
Favorites list appears in the
display.
2. Press the Remove soft key. The
Favorites list changes, as
shown.
Note: The Voicemail favorite (1) is
deactivated to prevent you removing it.
4. Press the Change soft key. The
changed Favorites list appears
in the display.
Tip: To scroll the Favorites list, press the Volume key (on the left side of the
phone) Up or Down.
Understanding Your Contacts
46
3. Press the Remove button (
for one or more assigned
Favorites.
)
Renaming a Contacts Group
Use this option to rename a Group in your Contacts list.
1. In standby mode, press the Menu soft key and select
Contacts. The Contacts screen appears in the display with
an alphabetical list of Contacts showing.
2. Press the Down arrow button at the top right corner of the
screen. The Groups screen appears in the display.
• General
• Family
• Friends
• Colleague
4. Press the Remove soft key. The
changed Favorites list appears
in the display.
• Business
3. Press the Rename soft key.
4. Select the Group (other than No Group) that you want to
rename, then press the Rename soft key.
5. The Rename Group text entry screen appears in the display.
The current name of the selected Group populates the text
field.
47
7. Press the Save soft key to save the changed group name.
3. Select Contacts entry you wish to send. A check mark
appears in the entry’s check box. Repeat this step for all
other Contacts entries you wish to send.
Deleting a Contacts Entry
4. When you have marked all the entries you wish to send,
press the Send soft key. The Choose device screen appears
in the display.
2. Press the Erase soft key, the Select to erase screen appears
5. Select the receiving device. Your phone automatically
connects with the other device and sends the selected
Contact entry(ies).
in the display.
3. Select the Contact to delete by pressing
.
4. Press the Erase soft key. You are prompted to confirm the
erasure.
5. To erase this contact, press the Yes button.
Memory Status
Sending a Contacts Entry
Use the Memory sub-menu to view the number of Contacts
entries you have stored, as well as the remaining memory.
Use the Send Name Card With Bluetooth option to send one or
more selected Contacts entries to another, compatible phone or
other device over a Bluetooth connection.
1. In standby mode, press the Contacts soft key. The Contacts
screen appears in the display.
2. Press the Down arrow button at the top right corner of the
screen and select More
➔
Memory status. The Memory
2. Press the Send Name Card soft key. The Select to send
status screen appears in the display, showing the amounts
screen appears in the display.
of memory used and remaining for Contacts entries.
Understanding Your Contacts
48
Section 7: Entering Text
This section details how to select the type of text entry screen
(phone-style touch keypad, QWERTY touch keypad, or divided or
full-screen handwriting recognition panel). This section also
describes how to select the desired text entry mode when using
the phone-style touch keypad or the QWERTY keyboard-style
touch keypad.
Phone-Style (3X4) Touch Keypad
Changing Text Entry Screens
Built-in QWERTY Keypad
This is the phone-style touch keypad for entering text, numbers,
and/or characters (such as punctuation and polarity signs) that
you can access by doing the following:
Your Delve has a keyboard-style touch keypad, commonly called
QWERTY, this is the default text entry screen for most features
and functions that require you to enter text, numbers, and/or
characters (such as punctuation and polarity signs.)
1. From the Phone Touch Keypad screen or from either of the
Handwriting Recognition screens, press the down arrow
button (
) (at the upper right corner of the screen).
49
The following options appear in the display:
entry screen by pressing one of the following keys:
• 3X4 Keypad — Displays the phone-style touch keypad.
3X4 Keypad — 3X4 (phone-style) touch keypad
• QWERTY — Displays the keyboard-style touch keypad, in
landscape mode.
Handwriting box
—
Divided handwriting recognition screen
• Handwriting box — Displays the divided text entry screen with the
handwritten text entry field at the bottom. Recognized text appears
in the upper field.
Handwriting full screen
recognition screen
—
Full-screen handwriting
• Handwriting full screen — Displays the full-screen handwritten
text entry field. Both handwritten text and the recognized text
appear in the same field.
Handwriting Recognition Screens
Your Delve also can recognize print handwriting. Just print your
text, and Delve translates it to text in a screen font.
2. Select 3X4 Keypad. The phone-style touch keypad appears
and the display automatically rotates to show information
in a wider, landscape format.
Using the QWERTY keypad, you can type letters, numbers,
punctuation, and other special characters into text entry fields or
other applications simpler and faster than using the phone-style
keypad.
Note: Your phone’s Browser function requires you to use the QWERTY
keypad. Other functions requiring text entry (such as, Messaging and
Memo Pad) accept text entry from whichever keypad you prefer.
Changing Text Entry Screen Using QWERTY Keypad
ᮣ
From the QWERTY touch keypad, change to another text
Entering Text
50
Accessing the Divided Handwriting Recognition Screen
Accessing the Full-Screen Handwriting Recognition Screen
The divided Handwriting
The full-screen Handwriting
Recognition screen offers an
integrated message text and
handwriting input field.
Recognition screen offers separate
message text (upper) and dedicated
handwriting (lower) fields.
Entering Text Using Handwriting
Recognition Screens
1. From the Phone Touch
Keypad screen or from the
full-screen Handwriting
1. Using a stylus, print your text
in the handwriting entry field.
The phone replaces your
Recognition screen, press the
down arrow button (
) (at
handwriting with printed text.
the upper right corner of the
screen), then select
2. To enter numbers, press
Handwriting box
.
then print numbers.
2. From the QWERTY Touch Keypad screen, press
.
3. To enter letters, press
then print words.
Note: The only punctuation handwriting recognition accepts is a period.
4. To enter a space, press
.
5. To move to a new line, press
.
6. To delete text, press
.
7. When you are finished writing your text, press the Done
soft key to save your writing.
51
8. To correct any handwriting recognition errors, press the
•
123 — Enter numbers by pressing the corresponding keys on the
phone keypad or the QWERTY keypad (indicated by
keys).
or
on
down arrow (at the upper right corner of the screen), then
select 3X4 Keypad or QWERTY
.
Changing the Text Entry Mode
Text messages can be made up of alphabetical characters,
numbers, and symbols. You can use the following text entry
modes to simplify text entry:
Tip: Using the QWERTY keypad or the Handwriting Recognition screens, also
use 123 mode to enter numbers and symbols into your message simply
by pressing the keys labeled with the symbols you want.
•
Symbols — Using the phone keypad, enter a symbol into your
message by pressing the key labeled with the desired symbol
•
Abc — Enter letters, numbers, and symbols by repeatedly pressing
each phone key until the desired character (as shown on the key)
appears in the display or by using the QWERTY keypad. ABC mode
letter options are:
(indicated by
or
on keys).
The current text entry mode (T9 Word, abc, Abc, ABC, 123, or
Symbols) is indicated on the touch keys. To change the text
entry mode, do the following:
–
–
Abc — Enter initial capital letters (indicated by
ABC — Enter all upper case letters (indicated by
on keys)
or
on
on
Changing 3X4 Keypad Text Entry Mode
1. While composing a text message or memo, press the Entry
Mode soft key.
keys)
–
abc — Enter all lower case letters (indicated by
or
keys)
The following options appear in the display:
Note: T9 Word does not support the QWERTY keypad or Handwriting
Recognition screens, which do not need this function.
•
•
•
•
•
Abc
abc
•
T9 Word — Press each phone key only once to enter the letter of the
ABC
word that you’re spelling. T9 WORD mode letter options are:
T9Word
T9word
–
–
–
T9 Word — Enter initial capital letters (indicated by
T9 WORD — Enter all upper case letters (indicated by
T9 word — Enter all lower case letters (indicated by
on keys)
on keys)
on keys)
Entering Text
52
®
•
•
T9WORD
123
Using T9 Mode (Phone Keypad Only)
T9 Word recognizes commonly used words for the numeric
sequence of key presses and inserts the word into your message.
T9 Word is much faster than the traditional method of text entry
(Abc) and requires only one key press per letter of the word that
you’re spelling.
2. Select the desired text entry mode.
3. To change to Symbols mode, press the Symbols soft key.
Changing QWERTY Keypad Text Entry Mode
ᮣ
While composing a text message or memo, to change text
entry mode:
ᮣ
While composing a text message, press the Left soft key,
then select T9Word.
•
To select abc mode, press
To toggle between abc and ABC modes, press
To select 123-Symbols mode, press or
To select additional Symbols mode, press
.
•
For practice, enter the word “Samsung” by pressing each of the
following keys only once:
–
.
•
.
–
.
S
A
M
S
U
N
G
Changing Handwriting Recognition Screen Text Entry
Mode
T9 Word recognizes that the most commonly used word for the
numeric sequence you just entered is “Samsung.”
ᮣ
While composing a text message or memo, to change text
entry mode:
•
•
To select Abc mode, press
.
To select 123 mode, press
.
53
–
–
Pause briefly and the displayed letter is accepted and inserted into your
message.
If more than one word shares the
same numeric sequence, T9 Word
provides the most commonly used
word, any additional words appear
in a scrollable pop-up list, in which
you can select a preferred word.
Press
to enter a space and press
to enter a period.
•
•
Using the QWERTY keypad, press the key labeled with the desired
letter (such as, press for “G” and for “H”).
Using either Handwriting recognition screen, use a stylus to print
the desired letters.
Note: To enter a space, press
enter a period, press
. To
. These key
Entering Numbers
Enter numbers into a text message while in 123 mode.
functions apply to both T9 Word and
1. While composing a text message, do one of the following:
•
Using the phone keypad, press the Entry Mode soft key, then
select 123
.
•
•
Using the QWERTY keypad, press
or
.
Using Abc Mode
1. While composing a text message, do one of the following:
Using either Handwriting recognition screen, press
.
2. Enter numbers while in 123 mode by using one of the
•
Using the phone keypad, press the Entry Mode soft key, then
select Abc
following:
.
•
•
Using the QWERTY keypad, press
.
•
Using the phone keypad or the QWERTY keypad, press the keys
labeled with the desired numbers.
Using either Handwriting recognition screen, press
.
•
Using either Handwriting recognition screen, use a stylus to print
the desired numbers.
2. Enter letters while in Abc mode by using one of following:
Using the phone keypad:
Press the key repeatedly until the desired letter appears in the display
•
Entering Symbols
Enter symbols (such as “@” or “%”) into a text message while in
–
(such as, press once for “G” and twice for “H”).
Symbols mode.
Entering Text
54
ᮣ
While composing a text message, enter symbols by using
one of following keypads:
•
Using the phone keypad:
–
Press the Symbols soft key. The first of four symbol screens appears in
the display.
–
Use the Prev and Next soft keys to page through the other symbols, if
desired.
–
–
Press the key labeled with the symbol that you wish to enter.
Repeat these steps to insert additional symbols into your message.
•
•
Using the QWERTY keypad:
–
–
Press
and/or
.
Press the key(s) labeled with the corresponding symbol(s) that you wish
to insert into your message.
Using either Handwriting recognition screen, the only symbol you
can enter is a period.
55
Section 8: Messaging
This section explains how to create, send, receive, and view
different types of messages. This section also describes the
features and functionality associated with messaging.
2. Address your message by selecting contacts and/or
entering number(s) or e-mail address(es) of message
recipient(s):
Creating and Sending New Messages
This section guides you through procedures for creating and
sending text, picture, and postcards.
•
To select a mobile number or e-mail address using your Contacts
list, press the Contacts button. The Contacts screen appears in
Creating and Sending a Text Message
1. In standby mode, press the
Messages soft key, then
Select a Contact entry. A check mark appears in the entry’s check box.
To add the selected Contact to the To list, press the Add soft key. The
Text Msg screen appears in the display showing the populated To list.
select Create Message
➔
Text
•
To enter recipient phone number(s) or e-mail address(es), select an
empty To field. The QWERTY touch keypad screen appears in the
display in 123 mode.
Message. The Text Msg
screen appears in the display
–
To enter a phone number, press the appropriate keys in the proper
showing the To list.
sequence, then press the Done soft key. You are returned to the To list.
–
To enter an e-mail address, change the text entry mode from 123 to
soft key. You are returned to the To list.
Tip: You can also access Messages by
pressing the Menu soft key and
selecting Messages
.
•
To select members of a Contacts Group as recipients, press the
Group button. The Groups screen appears in the display.
–
Select the desired Group. The Contacts screen appears in the display.
Messaging 56
–
–
Select individual Contacts or select Select All. Check marks appear in
the check boxes for the selected Contacts.
Note: You can use any of the Delve’s four text entry screens to enter your
Press the Add soft key. You are returned to the To list.
•
To select a phone number from a Recent Call as a recipient, press
the Recent Calls button. The Calls screen appears in the display.
–
–
–
If desired, press the down arrow button in the upper right corner of the
screen, then select All Incoming Outgoing, or Missed calls.
,
,
•
To use pre-composed text, change from the QWERTY touch keypad
to another text entry screen and press the Add Quick Text soft key.
Select individual calls or select Select All. Check marks appear in the
check boxes for the selected calls.
Press the Add soft key. You are returned to the To list.
3. When you are finished addressing your message, press the
Next soft key. The QWERTY touch keypad screen appears
in the display in lower-case mode.
5. When you’re finished composing your message text, press
the Done soft key. A preview of your message appears in
the display.
6. If you have finished your text message, you can send it by
pressing the Send soft key.
•
Before sending your text message, you can change or add
recipients to your message by pressing the Edit Send To soft key.
•
Before sending your text message, you can add media (Graphics,
Animations, or Sounds) to your message by pressing the Add
Media soft key.
•
Before sending your text message, you can set message send
options by pressing the More soft key and select Sending Options
page 62.)
.
57
Creating and Sending a Picture Message
1.In standby mode, press the Messages soft key, then select
Create Message
➔
Picture Message. The Picture Msg
screen appears in the display showing the To list.
Tip: You can also access Messages by pressing the Menu soft key and
selecting Messages
.
2. Address your message as you
would a Text message (see
one addition:
Note: You can use any of the Delve’s four text entry screens to enter your
•
To send this message to your
Online Album, press the Alltel
Mypics button.
•
To use pre-composed text, change from the QWERTY touch keypad
to another text entry screen and press the Add Quick Text soft key.
3. When you are finished
addressing your message,
press the Next soft key. The
Picture Msg fields screen
appears in the display.
6. If desired, repeat steps 4 and 5 for the Text field.
7. To add a picture to the message, select the Picture field.
You are prompted to Take a Photo or to add a photo from
the My Images folder.
4. If desired, select the Subject field. The QWERTY touch
keypad screen appears in lower-case mode.
Messaging
58
Send Picture Messages in Camera Mode
•
•
To activate the phone’s camera and take a new picture, select Take
Picture messages can be sent from your phone’s camera to
recipients with compatible phones or devices. You can even
accompany a picture with a voice memo or preloaded sound file.
To access your photo gallery, select My Images. With pictures in
the gallery, a list of thumbnail images appears in the display. Select
the desired photo and press the Send soft key.
Tip: You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate To field of the Picture
Msg screen.
You are returned to the Picture Msg screen which is
populated with the selected photo in the Picture field.
8. If desired, you can add a sound file to accompany the
1. In standby mode, press and hold the Camera key (
).
picture by selecting the Sound field.
The camera viewfinder screen appears in the display.
•
To record a sound file to add to this message, select Record New.
2. Using the display as a viewfinder, when the image that you
wish to send appears in the display, press the Camera key
•
To add an existing sound file, select My Sounds, select a preferred
file for a list of available sound files, and press the Send soft key.
(
) to take a picture.
You are returned to the Picture Msg screen which is
Note: For more information about using the camera feature in your phone,
populated with the selected sound file in the Sound field.
9. To send your finished message, press the Send soft key.
3. Press the Send soft key. You are prompted to Send to Alltel
•
Before sending your Picture message, you can set message send
my pics.
options by pressing the More soft key and select Sending Options
.
•
•
To send your picture to Alltel my pics, press the Yes button.
To send your picture to other recipients other than Alltel my pics,
press the No button.
•
•
To preview your Picture message as the recipient(s) will see it, press
the Preview soft key.
To make changes to your message, press the Back soft key.
59
If necessary, the Delve resizes your picture for sending,
then the Picture Msg screen appears in the display
showing the To list.
Creating and Sending a Video Message
1.In standby mode, press the Messages soft key, then select
Create Message
➔
Video Message. The Video Msg screen
appears in the display showing the To list.
one addition:
Tip: You can also access Messages by pressing the Menu soft key and
selecting Messages
.
•
To send this message to your Online Album, press the Alltel
2. Address your message as you
would a Text message (see
one addition:
Mypics soft key.
5. When you are finished addressing your message, press the
Next soft key. The Picture Msg fields screen appears in the
display with your new picture populating the Picture field.
6. To complete and send your message, refer to steps 4 – 11
•
To send this message to your
Online Album, press the Alltel
Mypics soft key.
Send Postcard Messages in Camera Mode
3. If desired, select the Subject
field. The QWERTY touch
keypad screen appears in
lower-case mode.
You can also create Postcard messages using photos taken with
the Delve’s camera.
Note: You can use any of the Delve’s four text entry screens to enter your
Messaging
60
8. To preview your Video message as the recipient(s) will see
it, press the Preview soft key.
•
To use pre-composed text, change from the QWERTY touch keypad
to another text entry screen and press the Add Quick Text soft key.
•
To make changes to your message, press the Back soft key.
9. To send your finished message, press the Send soft key.
Send Video Messages in Camcorder Mode
5. If desired, repeat steps 3 and 4 for the Text field.
Video messages can be sent from your phone’s camcorder to
recipients with compatible phones or devices.
6. To add a video clip to the message, select the Video field.
You are prompted to Take a Video or to add a video clip
from the My Videos folder.
Tip: You can send a Video message to up to ten recipients. Enter each
recipient’s address or phone number in a separate To field of the Video
Msg screen.
•
To activate the phone’s camcorder and record a new video clip,
press the Send soft key.
1. In standby mode, press and hold the Camera key (
).
The camera viewfinder screen appears in the display.
•
To access your photo gallery, select My Videos. With video clips in
the gallery, a list of thumbnail images appears in the display. Select
the desired video clip and press the Send soft key.
2. Press the Mode soft key. The camcorder viewfinder screen
appears in the display.
3. Press the Recording Mode soft key. Select the Video Msg
You are returned to the Video Msg screen which is
option.
populated with the selected video clip in the Video field.
7. Before sending your Video message, you can set message
send options by pressing the More soft key and select
Note: For more information about setting camcorder options in your phone,
61
4. Using the display as a viewfinder, when the image that you
9. To complete and send your message, refer to steps 3 – 9
wish to send appears in the display, press the Camera key
(
) to record a video. The time counter at the bottom
Message Sending Options
of the Camcorder viewfinder screen indicates recording
time in seconds.
You can set priority, validity, and
other options before you send a
message. Which options appear in
the Sending Options list depends on
what type of message you have
composed and what message field
you have highlighted.
5. To end your video clip, press Stop
(
).
Note: For more information about using the camcorder feature in your
6. Press the Send soft key. If necessary, the Delve resizes
your picture for sending, then the Picture Msg screen
appears in the display showing the To list.
1. After you’ve composed a Text,
Picture, or Video message,
press the More soft key and
select Sending Options. The
following options appear in
the display:
one addition:
•
To send this message to your Online Album, press the Alltel
Mypics soft key.
• Priority Level — Lets you assign a High Normal, or Low (pic/
,
video messages only) priority to the message.
8. When you are finished addressing your message, press the
Next soft key. The Video Msg fields screen appears in the
display with your new picture populating the Video field.
• Validity Period — Lets you select a Date and Time when this
message will no longer be available to the recipient. When your
selected date and time pass, your message is recalled.
• Enh. Delivery Ack / Delivery Ack — Set to On to be alerted when
your message is received by the addressee.
Messaging
62
–
–
View Now — Opens the message where you have the option to Reply,
Forward, Erase, Add To Contacts, Lock/Unlock, Save Quick Text, Save
Media, or Message Info.
View Later — Closes the popup and saves the message to your inbox
where you can view it later.
• Deferred Delivery Time — Lets you set a Date and Time when
this message will be delivered.
2. Select any desired options and values for those options.
3. To save your settings, press the OK soft key. You’re
returned to the message creation screen.
Select the desired option.
Receiving New Messages
Receive Messages in Chat View
When you receive a message in
standby mode, one of the following
occurs:
When you exchange a series of text
messages with a single Contact or
number, you can view your
incoming messages and your sent
messages as if they were a “chat
session”.
•
If Auto View and Auto Scroll are
both set to On — An alert sounds
(unless turned off) and the message
text automatically appears in the
display and scrolls slowly to the end of
the message. (For more information,
Frank
Note: To use Chat View, you must set the
Text Msg View
➔
View Mode setting
1. View your incoming text
•
If Auto View is set to Off — An alert
sounds (unless turned off) and a New Message notification appears in
the display along with the closed envelope icon ( ). The date and
time of the message and the following options also appear in the
display:
message(s) in Auto View or
View Now mode. (For more
•
indicates an incoming text message.
63
•
indicates an outgoing text message.
2. You have the following available options:
To reply to the latest incoming text message, press the Reply soft
key, and select Text Message
•
•
If Auto View and Auto Scroll are both set to On — The message text
automatically appears in the display and scrolls slowly to the end of
•
.
A
New Message notification appears in the display along with the
closed envelope icon ( ). The date and time of the message and
the following options also appear in the display:
Note: Only text messages appear in the Chat With screen.
•
•
•
To view details about the last message in the Chat With screen,
press the View Last Msg. soft key.
–
–
View Now — Opens the message where you have the option to Reply,
Forward, Erase, Add To Contacts, Lock/Unlock, Save Quick Text, Save
Media, or Message Info.
View Later — Closes the popup and saves the message to your inbox
where you can view it later.
To erase selected or All messages listed in the Chat With screen,
press the Erase soft key.
To access additional options, press the More soft key:
–
–
–
–
–
Forward — Forward a copy of a selected text message listed in the
Chat With screen.
Select the desired option.
Voicemail
Add to Contacts — Adds the originator of an incoming text message
to your Contacts list.
Voicemail allows callers to leave voice messages in your voice
mailbox, and lets you review, play, and delete your voice
messages any time you are in your Carrier’s network coverage
area.
Lock/Unlock — Blocks/permits deletion of selected or All text
messages listed in the Chat With screen.
Save Quick Text — Save the message text as a Quick Text entry for
later reuse.
Voice Mail Setup
Message Info — Shows the originator, date and time, priority,
message type, and message size.
Before callers can leave voice mail messages, you must first set
Receive Messages While in a Call
When you receive a message while in a call, one of the following
occurs:
Messaging
64
Checking your Voicemail
1. In standby mode, press the Dialer soft key, then press and
•
To compose and send a message to the sender of the message,
press the Reply soft key, then select the type of message you wish
to compose: Text, Picture, or Video.
hold
until you’re connected to your Wireless Carrier’s
•
•
•
To forward the message to other recipients, press the Forward soft
key.
voicemail system. A recorded message prompts you for a
password.
To delete one or more messages, press the Erase soft key, select
the message(s) to be deleted, then press the Erase soft key again.
2. Enter your password, then follow the recorded prompts, to
listen to your voice message(s), change administrative
options, and so on.
To access other options, press the More soft key. The following
options appear in the display:
–
Add To Contacts — Lets you add the sender’s number or E-mail
address to your Contacts list.
Tip: You can also access your voice mail by selecting an entry in the
–
–
–
Lock Unlock — Blocks or allows erasure of the message.
/
Voicemail folder.
Save Quick Text — Saves the message text as a Quick Text entry.
Message Folders
Inbox
Message Info — Lets you display status information about a
message.
Select an option to perform the function for that option.
Received messages of all types (except Voicemail) are stored in
the Inbox.
Messages and Lock Mode
Your phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code. (For
1. In standby mode, press the Messages soft key, then select
Inbox, to open the Inbox folder.
2. To delete one or more messages, press the Erase soft key,
select the message(s) to be deleted, then press the Erase
soft key again.
3. To view a message, select it, then do one of the following:
65
Outbox
•
To access other options, press the More soft key. The following
options appear in the display:
Your phone stores outgoing messages in the Outbox, regardless
of whether the message was successfully sent to, or received by,
the addressee.
–
Add To Contacts — Lets you add the sender’s number or E-mail
address to your Contacts list.
–
–
–
Lock Unlock — Blocks or allows erasure of the message.
/
Save Quick Text — Saves the message text as a Quick Text entry.
Tip: Verify whether and when a message or e-mail was successfully
Message Info — Lets you display status information about a
message.
Select an option to perform the function for that option.
1. In standby mode, press the Messages soft key, then select
Outbox. A list of your outgoing messages appears in the
display.
Drafts Folder
Messages in the Drafts folder are those that have been
composed but never sent. You can return to the Drafts folder at
any time to view, edit, or send a draft message.
2. To delete one or more messages, press the Erase soft key,
select the message(s) to be deleted, then press the Erase
soft key again.
1. In standby mode, press the Message soft key, then select
Drafts. A list of your draft messages appears in the display.
2. To delete one or more messages, press the Erase soft key,
select the message(s) to be deleted, then press the Erase
soft key again.
3. To view a message, select it, then do one of the following
•
•
•
To re-send a message to the original recipient(s), press the Resend
soft key.
To forward the message to other recipients, press the Forward soft
key.
3. To view a message, select it, then do one of the following
•
To send a message to the original recipient(s), press the Send soft
key.
To delete one or more messages, press the Erase soft key, select
the message(s) to be deleted, then press the Erase soft key again.
•
To change the message and/or the recipients, press the Edit soft
key.
Messaging
66
•
•
To delete one or more messages, press the Erase soft key, select
Note: You can also dial your voice mailbox from standby mode by pressing
the Dialer soft key, and then pressing and holding
the message(s) to be deleted, then press the Erase soft key again.
.
To access other options, press the More soft key. The following
options appear in the display:
E-Mail
–
Add To Contacts — Lets you add the sender’s number or E-mail
You can use your Delve to access your personal or business e-
mail account(s).
address to your Contacts list.
–
–
–
Lock Unlock — Blocks or allows erasure of the message.
/
1. In standby mode, press the Messages soft key, then select
Save Quick Text — Saves the message text as a Quick Text entry.
E-Mail
.
Message Info — Lets you display status information about a
message.
2. Follow the prompts that appear in the display to setup your
Select an option to perform the function for that option.
phone to access an E-Mail account.
Voicemail
Erasing Messages
You can erase all of the messages in each/all of your message
folders from one convenient location.
New voice messages in your voice mailbox are logged in the
Voicemail folder of the Messages menu. Open the Voicemail
folder to view the Callback # (if available), Urgency, and other
details of new voicemail messages.
Note: This function erases all messages in a selected message folder or in
all message folders. To delete a single message, from the Messaging
menu, select the message folder where the message to be deleted is
stored, then press the Erase soft key, select the message in the list,
and press the Erase soft key again.
1. In standby mode, press the Message soft key, then select
Voicemail. A Voicemail status screen indicating the number
of new messages in your voice mailbox, their urgency, and
any callback numbers appears in the display.
1. In standby mode, press the Messages soft key, then select
Erase Messages. The following options appear in the
display:
2. Press the Call soft key or press
to call your voice
mailbox and listen to your voice messages.
• Inbox — Lets you delete all messages from your Inbox.
67
–
Automatically erase/or prompt you to delete the oldest read messages
after message memory is full and new messages are received.
• Outbox — Lets you delete all messages from your Outbox.
• Drafts — Lets you delete all draft messages from the Drafts folder.
• Quick Text — Lets you change pre-composed text or compose
text for addition to your outgoing messages.
• All Messages — Lets you delete all messages from all message
folders.
• Voicemail Number — Lets you update your Voicemail access
number.
• E-Mail — Lets you delete all messages from your E-Mail message
folder(s).
• Keypad/Entry Mode — Lets you set the following:
2. Select the folder(s) containing the messages that you wish
to delete. You are prompted to confirm the erasure of all
messages in the folder(s).
–
Default Keypad (3X4 Keypad, QWERTY, Handwriting box, Handwriting
full screen) for entering message text.
–
Default text Entry Mode [Abc/abc/ABC (alphabetically), T9 Word, or
123 (numerical)] for composing message text.
3. To cancel deleting any messages, press the No soft key. To
delete all messages from the selected folder, press the Yes
soft key.
• Callback Number — Lets you disable (Off), enable (On), and
update the callback number that can be inserted in outgoing
messages.
• Signature — Lets you disable (Off), enable (On), and update the
Message Settings
The Message Settings let you customize Delve messaging to suit
your preferences.
text signature that can be inserted in outgoing messages.
• Reminder — Lets you set the message receipt reminder to play
Once Every 2 Minutes, Every 15 Minutes, or not to play (Off).
,
1. In standby mode, press the Messages soft key, then select
Message Settings. The Message Settings screen appears in
the display listing the following options:
• Text Msg View — Lets you set Delve messaging to do the
following:
–
Auto View — Set your Delve to Display your incoming text messages
automatically when they’re received or to prompt you whether to view
them now or later.
• Auto Save/Auto Erase — Lets you set Delve messaging to:
–
Automatically save unsent messages to the Outbox folder, to discard
them, or to prompt you to elect to save/discard unsent messages.
–
View Mode — Set Delve messaging to display incoming text
messages one at a time or to display text messages (outgoing and
incoming) in a Chat-style view.
Messaging
68
• Picture/Video Msg Download — When set to On, your Delve
automatically downloads Picture and Video messages to your Inbox
folder when they are received. When set to Off, you are prompted
to select whether to download the message now or later.
2. Select any desired options and settings for those options.
3. To save your settings, press the OK soft key. You are
returned to the Message Settings menu.
69
Section 9: E-mail
The E-Mail feature is an integrated messaging application that
lets you send and receive e-mail messages from your personal e-
mail account(s) and/or from your business e-mail account.
For additional service
choices, select More...
This section details how to launch the E-Mail feature.
Launching E-Mail
1. In standby mode, press the
Menu soft key, then select
E-Mail
(
).
The E-Mail Setup Wizard
Welcome screen appears in
the display.
2. To proceed, press (
).
“Receiving data:” appears in
the display, followed by a list
of E-Mail service providers.
3. To begin setup of access to
your personal or business e-mail account, select the
desired provider.
E-mail
70
Section 10: Alltel Shop
This section explains the Alltel Shop features where users can
download multimedia, applications, games, and check news and
sports.
Changing Your Settings
Use the Settings menu in Auto Shop to manage, move, order
applications, and much more.
Finding Applications
1. At the Alltel Shop menu, select Settings.
With Alltel Shop, you can download
full featured applications over the
air including games, personalized
ring tones, pictures, and more.
The following options appear in the display:
•
•
Order Apps — Download applications over the network.
Move Apps — Move previously downloaded applications between
available folders.
ᮣ
In standby mode, press the
Menu soft key, then select
Alltel Shop. The Alltel Shop
screen appears in the display.
The following options are
available:
•
•
•
Manage Apps — View used and available memory.
Screen Savers — View downloaded screensavers.
View Log — View the Auto Shop log, which displays information
about recent activity using Auto Shop.
2. Select the desired option to enter its sub-menu and view or
change settings.
Using On-line Help
The Help sub-menu within Alltel Shop is a short tutorial on
several Alltel Shop features. View information about charges,
cancelling subscriptions, buying applications, disabling
applications, and more.
• Shop — Lets you locate,
purchase (if needed), and download selected applications.
•
Various Applications — Launch the related applications when
selected.
• Settings
• Help
—
—
71
1. At the Alltel Shop menu, select Help. The available Help
subjects appear in the display.
2. To view the Help information, select the desired Help
subject.
Alltel Shop
72
Section 11: Alltel Web
This section outlines how to launch Alltel Web, how to navigate to
other pages on the web, and how the keys on the keypad are
used with the web application. Additionally, links to other sites
are briefly discussed.
The Alltel Web screen appears in the display in landscape
mode. A list of categories (each representing one or more
web sites) appears in the display.
Browser Features
With Alltel Web, you can conveniently surf the web and download
ringtones and wallpapers using your phone. Each time you
launch Alltel Web, your phone connects to the Internet and the
service indicator icon with a red arrow (
display.
) appears in the
Stored Web Content
2. Select the desired category, to enter the category list.
Alltel Web ends an Internet connection after a certain period of
inactivity, however some information from your session remains
stored in the phone (if you leave your phone turned on). You can
access this information without reconnecting to the Internet.
However, if you are viewing stored information, and you select a
link to a site that was not accessed in your last session, you
automatically re-connect to the Internet.
Exit Browser
ᮣ
To exit Alltel Web, press
Using Browser
Alltel Web presents on-screen items in any of the following ways:
Text or numeric input.
.
•
Launching Browser
1. In standby mode, press the Menu soft key, then select Alltel
Note: When entering text in a web page field, Alltel Web limits you to using
the QWERTY touch keypad.
Web
.
73
•
•
•
Links (embedded in content).
Numbered options (some may not be numbered).
Simple text.
Zoom — Lets you enlarge or shrink web pages.
Favorites — Displays and lets youselect from a list
of web sites you have saved as your favorites.
You can act upon options or links by selecting them.
Using Links
Add to Favorites — Lets you save the address and
Links have several purposes, such as jumping to a different
page, to a different site, or even initiating a phone call. Links are
shown inside of brackets ([ ]). You can normally select a link.
title of the current web page to your favorites list.
Slide — Lets you press and slide the current web
page to view undisplayed portions of the page.
How Alltel Web Buttons Work
The top and right side of the Alltel Web screen contain control bars.
The following table lists Alltel Web buttons that appear in the control
Settings — Launches the Browser Settings menu,
letting you customize Browser to suit your needs.
Press to exit the Browser and return the phone to
standby mode.
bars and their functions and the
key.
Back — Displays the previously viewed web page,
if any.
Forward — Displays the previously viewed web
page, if any.
Refresh — Reloads and displays the current web
page.
Home — Loads and displays the web page
designated as your “home page”.
Alltel Web
74
Section 12: Alltel TV on Demand
Alltel TV on Demand lets you access video clips of popular TV
shows from both broadcast and cable networks.
3. To view a video clip, select the desired folder, then select
the desired video clip.
This section details how to launch the TV on Demand feature.
Launching TV on Demand
1. In standby mode, press the
Menu soft key, then select
TV on Demand
(
).
The first time you launch TV
on Demand, the following
screens appear in the display:
•
Airtime charges message (To
stop this message appearing
each time you launch TV on
Demand, press the Don’t show
this again check box, then press
the Continue soft key.)
•
•
Alltel TV on Demand logo
Welcome Movie (first time you launch TV on Demand) —
demonstrates the basics of using TV on Demand.
2. To display a list of available video clip folders, press the
Guide soft key.
75
Section 13: Alltel Navigation
Alltel Navigation lets you find your way to a desired destination
by letting you access maps and by providing voice and on-screen
driving directions.
3. Press the Submit button. The Logging in... pop-up appears
in the display, followed by the User Agreement screen.
4. Read the User Agreement and, if you agree with it, press
This section details how to launch the Navigation feature.
the Accept button. Otherwise, press the Decline button.
Note: To use the Navigation feature, first check that your phone’s Location
5. If you accept the User Agreement, you are prompted to
view a tour of Navigation features. To view the tour, press
the Yes button.
Launching Navigation
1. In standby mode, press the
Menu soft key, then select
6. If you haven’t set your
phone’s Location option to
Location On, a Warning screen
appears in the display to
remind you to change your
Location setting.
Navigation
(
).
The Alltel Navigation logo
screen displays, followed by
the Register page.
7. Press the Continue button.
The Alltel Navigation screen
appears in the display.
2. Select each field to enter your
name and e-mail address.
Alltel Navigation
76
Section 14: Camera-Camcorder
Use your Samsung phone to take full color digital pictures and
videos, display them on your phone’s vivid color display, and
instantly share them with family and friends. It’s fun, and as easy
to use as a traditional point-and-click camera or camcorder. This
section explains how you can do the following:
•
•
•
Take pictures and videos with your phone’s built-in digital camera-
camcorder.
Send and receive pictures and videos taken with your phone’s camera-
camcorder.
Set the several options associated with the camera-camcorder that
help you take crisp, clear pictures and videos.
Note: You can also activate the camera by pressing the Menu soft key, then
select Multimedia
➔
Camera.
Taking Pictures and Videos
Taking pictures videos with the built-in camera-camcorder is as
simple as choosing a subject, pointing the lens (located on the
rear of your phone, at the top), and pressing a button.
2. Using the display as a viewfinder, point the camera at your
subject.
3. When the image that you wish to capture appears in the
Taking Snap Shots (Single Pictures)
display, press the Camera key (
).
To take a single picture using the current camera settings, do the
following:
4. Press the Save button to save the picture to memory.
5. Press the Erase button to erase the photo.
1. In standby mode, press and hold the Camera key (
)
6. To exit the Camera feature, press
.
on the right side of the phone. The camera view finder
screen appears in the display. (For more information, refer
77
• Mosaic — Lets you take a mosaic of 4 or 9 photos.
• Frame — Lets you select a frame to surround your photos.
3. When you select the Multi option, the following options
appear in the display:
Tip: You can change a number of the camera’s settings to suit particular
Taking Multi Shot Pictures
• 3
When taking pictures of moving subjects or subjects you cannot
pose, such as children and pets, the camera’s Multi Shot mode
simplifies the process of taking multiple pictures in quick
succession. After taking Multi Shot pictures, the camera
automatically displays thumbnail views of the pictures you have
just taken so you can select the best picture(s) and discard the
rest.
• 5
When you select Mosaic, the following options appear in
the display:
• 4
• 9
4. Select the desired number of shots.
1. In standby mode, press and hold the Camera key (
)
The Multi progress bar (
) or the Mosaic icon (
or
on the right side of the phone. The camera view finder
or
)
screen appears in the display. (For more information, refer
(which acts as a progress bar while pictures are being
taken) appears in the display.
Note: You can also activate the camera by pressing the Menu soft key, then
select Multimedia
➔
Camera.
5. Using the display as a viewfinder, point the camera lens at
your subject.
2. Press the Shooting Mode button ( ). The following
6. Press the Camera key. The camera takes one picture
options appear in the display:
(
Single) or multiple pictures in quick succession (Multi or
• Single — Take one photo with each press of the Camera button.
Mosaic).
• Multi — Lets you take a series of 3 or 5 photos.
Camera-Camcorder
78
7. To save the picture(s) to memory, press the Save button.
4. Press the Save button to save the video to memory.
To discard the pictures, press the Erase button. You are
5. Press the Erase button to erase the video. You are
prompted to confirm the erasure.
prompted to confirm the erasure.
Screen Layouts
Taking Videos
Camera Screen
To take a video using the current camcorder settings, do the
following:
1. In Camera mode, press the Mode button (
). The
camcorder view finder screen appears in the display. (For
Note: You can also activate the camcorder from standby mode by pressing
the Menu soft key, then selecting Multimedia
➔
Camcorder
.
When you activate your phone’s camera, the second line of the
display is reserved for the current camera resolution setting and
the picture counter. The center of the display shows a viewfinder
image of the subject at which the camera is pointed.
2. Using the display as a viewfinder, point the camera lens at
your subject.
3. Press the Camera key when the image that you wish to
capture appears in the display. Recording continues until
one of the following occurs:
Camera Screen Buttons
Changes the Camera-Camcorder mode to Camcorder.
•
•
•
You press Stop
(
).
Available memory is used up (Normal setting).
15 seconds of video have been recorded (Video Msg setting).
79
White Balance — Indicates camera’s white balance
setting. (You can change the camera white balance
Lets you set the Camera’s Shooting Mode to Single
,
Multi Mosaic, or Frame
,
.
Lets you set the resolution of your photos between
2Megapixels – 0.1Mmegapixels and Picture ID
Quality — Indicates camera’s picture quality setting.
[You can change the picture quality setting. (For more
.
Lets you select values for Quality
,
ISO, White Balance,
Effects, and Exposure metering
.
Photo Limit — Indicates the available number of photos
you can take. (Depending on the camera resolution
setting.)
Lets you set Night Shot OFF or ON
.
Phone Memory — Indicates photos will be stored in the
phone’s memory.
Lets you set a time delay before the Camera takes a
picture.
Card Memory — Indicates photos will be stored on a
microSD Memory Card.
Lets you set the Camera to brighten or darken your
photos.
Brightness — Brightens or darkens the image
from 4 to +4.
Shooting Mode (Mosaic) — Takes multiple pictures
Lets you access the My Images folder.
manually when you press the Camera key (
). The
number of pictures taken depends upon the Mosaic
setting.
Camera Screen Icons
Shooting Mode (Multi) — Takes multiple
ISO — Indicates camera exposure index setting.
pictures when you press the Camera key
(
). The number of pictures taken
depends upon the Multi setting.
Camera-Camcorder
80
Self Timer in use — Delays the camera shutter from 3 to
10 seconds after you press the Camera key ( ).
Lets you set the Camcorder’s Recording Mode to Normal
or Video Msg
.
Battery Level — Number black bars indicates level of
charge. When the battery is low, an empty battery icon
flashes and the phone sounds an alert, which indicates
your phone is about to shut down.
Lets you set the resolution of your videos between
320x240 and 176x144
.
Lets you select values for Quality
,
White Balance, and
Camcorder Screen
Effects
.
Not supported by Camcorder.
Lets you set a time delay before the Camcorder records
a video.
Lets you set the Camcorder to brighten or darken your
videos.
When you activate your phone’s camcorder, the first line of the
display is shows current camcorder setting icons. The center of
the display shows a viewfinder image of the subject at which the
camcorder is pointed.
Lets you access the My Videos folder.
Camcorder Screen Icons
Camcorder Screen Buttons
White Balance — Indicates the camcorder’s white
balance setting. (You can change the camcorder white
Changes the Camera-Camcorder mode to Camera.
81
Quality — Indicates camcorder’s video quality setting. (You
can change the video quality setting. For more information,
Note: If the Alltel Mypics reminder setting is set to On, you are prompted to
send a copy of your picture or video to your Alltel MyPics folder in a
Phone Memory — Indicates videos will be stored in the
phone’s memory.
On your phone, a picture is stored in the My Images folder. A video is
stored in the My Videos folder. These folders are part of the phone’s
memory and/or part of an optional Memory Card devoted to storing,
browsing, and viewing saved pictures and videos. (For more
Card Memory — Indicates videos will be stored on a
microSD Memory Card.
Memory Available — Indicates the percentage of
memory available for you to store a video.
•
•
Set the picture as wallpaper in the idle screen by press the Set as
Wallpaper button.
Send the picture or video to someone else by pressing the Send
button.
Battery Level — Number black bars indicates level of
charge. When the battery is low, an empty battery icon
flashes and the phone sounds an alert, which indicates
your phone is about to shut down.
Brightness — Brightens or darkens the image
from 4 to +4.
•
Discard the picture or video by pressing the Erase soft key.
S
elf Timer in use — Delays the camcorder from
recording for from 3 to 10 seconds after you press the
Camera key ( ).
Camera Options
The Camera Option buttons let you adjust the default camera
settings to suite available lighting, the subject of the photo, or the
purpose of the photo.
Saving Pictures and Videos
After you’ve taken a picture or video, you can do any of the
following:
View Mode
•
Save the picture or video by pressing the Save button.
View Mode lets you quickly add or remove elements of the
Camera viewfinder screen.
Camera-Camcorder
82
ᮣ
In camera mode with the status icon bar and camera
buttons showing, press the center of the display the
following number of times:
Mode
Switches the Camera to Camcorder mode. The Camcorder view
finder screen appears in the display.
Shooting Mode
• First press — Icons disappear except for photo/memory counter
and battery level.
Shooting Mode lets you select Fun Frames and/or take multiple
pictures in succession when you press the Camera key (
• Second press — Camera buttons disappear.
).
• Third press — Icons and camera buttons reappear.
1. In camera mode, press
. The following options pop-
Zoom
up:
Zoom lets you temporarily enlarge the pictures you take, unless
your Size setting is 2.0m. Increasing the Zoom (2 – 9) enlarges
your pictures or videos (1 is normal).
• Single — 1 picture taken when your press the Camera key (
).
• Multi — Off / 3 pictures taken in succession / 5 pictures taken in
succession.
• Mosaic — Off / 4 of the same new picture in a 2-by-2 array / 9 of
the same new picture in a 3-by-3 array.
Note: Zoom is not available if the Size option is set to 2.0m
.
• Frame — Lets you select a frame for enclosing each new photo.
2. Select the desired option and setting. The related icon
appears in the display.
ᮣ
In camera or camcorder viewfinder screen, use the Up and
Down Volume keys to adjust the Zoom (the screen image
enlarges to show the affects of your changes).
The next time you press the Camera key (
), the camera
Note: When the Shooting Mode option is set to a value other than Single
,
either a Multi shot progress bar (
) or a Mosaic shot icon
takes an enlarged picture according to your selected Zoom
setting.
(
) appears in the viewfinder screen.
When you press the Camera key (
), the camera takes
several pictures in rapid succession (Multi and Mosaic).
83
Size
• On
2. Select the Night Shot setting of your choice. You’re
returned to the camera viewfinder screen.
Change the size (in bytes) of your pictures using the Size setting.
1. In camera mode, press
. The following options pop-
up:
Self Timer
• 2Megapixels (1600x1200 pixels)
• 1.3Megapixels (1280x960 pixels)
• 0.8Megapixels (1024x768 pixels)
• 0.3Megapixels (640 X 480 pixels)
• 0.1Megapixels (320x240 pixels)
Self Timer lets you delay taking a picture long enough to let you
join others in a picture.
1. In camera mode, press
. The following options pop-
up:
• Off
• Picture ID — lets you take pictures the correct size and resolution
• 3 seconds
• 5 seconds
• 10 seconds
for Contacts list picture IDs.
2. Select the desired option. You’re returned to the camera
viewfinder screen.
2. Select the desired Self Timer option. If you select
3,
5, or
10, the Self Timer icon appears in the camera screen in the
Note: The Size setting affects zoom capabilities. When Size is set to 2.0M
(1600 X 1200), zoom is not available. When Size is set to any value
lower than 2.0M (1600 X 1200), zoom settings 1 – 9 are available.
display.
When you press the Camera key (
), the countdown
Night Shot
timer indicates the time remaining before the camera
takes the picture.
Night Shot lets you take pictures in low light conditions.
1. In camera mode, press
in the display:
• Off
. The following options appear
Tip: To stop the countdown timer without resetting it, press
.
Camera-Camcorder
84
Brightness
• High
• Normal
Brightness lets you temporarily lighten the pictures you take.
Increasing the Brightness (-4 – +4) lightens your pictures (0 is
normal).
• Economy
2. Select the quality setting of your choice. You’re returned to
the camera viewfinder screen.
1. In camera mode, press
. The Brightness adjustment
appears in the display.
ISO
ISO lets you set your camera’s exposure index.
2. To brighten your next picture(s), press
. To darken your
1. In camera mode, press (
), then select Camera Tab ➔
next picture(s), press . (The screen image lightens or
ISO. The options are:
darkens to show the affects of your changes).
The next time you press the Camera key (
• Auto
), the
• 100
camera takes a lighter or darker picture according to your
selected Brightness setting.
• 200
• 400
Camera Settings — Camera Tab
2. Select the ISO setting of your choice. You’re returned to the
camera viewfinder screen.
When you change a setting, your change is retained until you
change that setting or reset all your camera settings.
White Balance
Quality
White Balance allows you to adjust video quality according to
available light.
You can affect how much your video is compressed, thereby
reducing it’s overall size (not to be confused with resolution).
1. In camera mode, press (
), then select Camera Tab ➔
Quality. The following options appear in the display:
85
1. In camera mode, press (
), then select Camera Tab ➔
Effects
White Balance. The name of the current White Balance
setting appears in the second line of the display. The
options are:
Change the look of your pictures with Effects. Choose from six
available settings such as Green, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
• Auto — The camera automatically adjusts color balance to
available light.
1. In camera mode, press (
), then select Camera Tab ➔
Effects. The following options pop-up:
• Daylight — Use this setting when taking photos in full sun.
• Cloudy — Use this setting when taking photos in cloudy
conditions.
Note: Choose Normal to disable Color Effects.
• Tungsten — Use this setting when taking photos under
• Normal — Subjects and pictures appear with a normal hue.
• Green — Subjects and pictures appear in a greenish hue.
• Negative — Subjects and pictures appear in inverted colors.
• Sepia — Subjects and pictures appear in a brownish-gray hue.
• B & W — Subjects and pictures appear in black and white.
• Aqua — Subjects and pictures appear in an aqua hue.
incandescent lights.
• Fluorescent — Use this setting when taking photos under
fluorescent lights.
2. Press the various White Balances to highlight them and to
show the effects they have on a photo.
3. When you have highlighted the White Balance you wish to
use, press the OK button. The camera viewfinder screen
appears in the display with your selected White Balance
applied.
2. Select the color effect of your choice, then press the OK
button. You’re returned to the camera viewfinder screen.
When you take your next picture, the phone’s display
previews your subject image with the selected color effect.
The next time you press the Camera key (
), the
camera applies the selected White Balance to your photo.
Camera-Camcorder
86
Exposure metering
1. In camera mode, press (
• Card Memory — Stores pictures on an optional microSD Memory
Card.
), then select Camera Tab ➔
2. Select the memory location setting of your choice, then
press the OK button. You’re returned to the camera
viewfinder screen.
Exposure metering. The following options appear in the
display:
• Normal — Adjusts exposure to the average light level over a large
picture area.
Auto Save
• Center-weighted — Adjusts exposure to the average light level
over a center portion of the subject.
1. In camera mode, press (
), then select Common Tab ➔
Auto Save. The following options appear in the display:
• Spot — Adjusts exposure to the light level over a small portion of
the subject.
• Off
• On
2. Select the Metering setting of your choice, then press the
OK button. You’re returned to the camera viewfinder
screen.
2. Select the automatic save setting of your choice, then
press the OK button. You’re returned to the camera
viewfinder screen.
When you take your next picture, the phone’s display
AlltelMypics reminder
previews your subject image with the measured exposure.
After you take a picture and press the Save button, AlltelMypics
reminder prompts you to send a copy of your picture to your Alltel
Mypics folder.
Camera Settings — Common Tab
Default storage
1. In camera mode, press (
), then select Common Tab ➔
1. In camera mode, press (
), then select Common Tab ➔
Default storage. The following storage options appear in
the display:
AlltelMypics reminder. The following options appear in the
display:
• Phone Memory — Stores pictures in phone memory.
• Off
87
• On
• Off
2. Select the AlltelMypics reminder setting of your choice,
then press the OK button. You’re returned to the camera
viewfinder screen.
• Shutter
• OK
• Melody
2. Select the shutter sound setting of your choice, then press
the OK button. You’re returned to the camera viewfinder
screen.
Guideline
Shows a cross hatch pattern in the view finder screen.
1. In camera mode, press (
), then select Common Tab ➔
Camcorder Options
Guideline. The following options appear in the display:
The Camcorder Options let you adjust the default camcorder
settings to suite available lighting, the subject of the video, or the
purpose of the video.
• Off
• On
2. Select the Guideline setting of your choice, then press the
OK button. You’re returned to the camera viewfinder
screen.
View Mode
View Mode lets you quickly add or remove elements of the
Camcorder viewfinder screen.
Shutter Sound
ᮣ
In camcorder mode with the status icon bar and
camcorder buttons showing, press the center of the
display the following number of times:
Choose from four different sounds whenever you take a picture.
Aside from being a cool sound effect, Shutter Sounds acts as an
audible reminder that your camera has taken a picture.
• First press — Icons disappear except for memory counter and
battery level.
1. In camera mode, press (
), then select Common Tab ➔
Shutter Sound. The following shutter sounds appear in the
• Second press — Camcorder buttons disappear.
display:
• Third press — Icons and camcorder buttons reappear.
Camera-Camcorder
88
Zoom
Size
Zoom lets you temporarily enlarge the videos you take.
Change the size (in bytes) of your videos by changing the video
Increasing the Zoom (2 – 9) enlarges your videos (1 is normal).
resolution setting.
ᮣ
In camcorder mode, use the Up and Down Volume keys to
adjust the Zoom (the screen image enlarges to show the
affects of your changes).
1. In camcorder mode, press the Size button. The following
options pop-up:
• 320 x 240 (pixels)
• 176 x 144 (pixels)
The next time you press the Camera key (
), the camera
2. Select the desired option, then press the OK button. You’re
returned to the camcorder viewfinder screen.
takes an enlarged picture according to your selected Zoom
setting.
Mode
Note: The Size setting is affected by the Recording Mode setting. When
Recording Mode is set to Video Msg, the Size setting is locked at 176 x
Switches the Camcorder to Camera mode. The Camera view
finder screen appears in the display.
144.
Self Timer
Recording Mode
Self Timer lets you delay taking a video long enough to let you
join others in the video.
1. In camcorder mode, press the Recording Mode button. The
following options appear in the display:
1. In camcorder mode, press the Self Timer button. The
• Normal — Record videos that are any length up, depending on
available memory.
following options appear in the display:
• Off
• Video Msg — Record videos that are a maximum of 15 seconds
long. The videos can be included in video messages.
• 3 seconds
• 5 seconds
• 10 seconds
2. Select the desired recording mode setting. The camcorder
viewfinder screen appears in the display.
89
2. Select the desired delay. The camcorder viewfinder screen
Settings — Camcorder Tab
appears in the display.
Quality
The next time you the Camera key (
), a countdown
You can affect how much your video is compressed, thereby
reducing it’s overall size (not to be confused with the Size
setting).
timer in the display indicates the time remaining before the
camcorder starts recording the video.
1. In camcorder mode, press the Settings button, then select
Camcorder Tab ➔ Quality. The following options appear in
the display:
Tip: To stop the countdown timer without resetting it, press
.
Brightness
• High
Brightness lets you temporarily lighten the videos you take.
Increasing the Brightness (-4 – +4) lightens your videos (0 is
normal).
• Normal
• Economy
2. Select the quality setting of your choice, then press the OK
button. You’re returned to the camcorder viewfinder
screen.
1. In camcorder mode, press
. The Brightness
adjustment appears in the display.
2. To brighten your next video(s), press
. To darken your
Note: The Quality is affected by the Recording Mode setting. When Recording
Mode is set to Video Msg, the Quality setting is locked at Economy
.
next video(s), press
. (The screen image lightens or
darkens to show the affects of your changes).
The next time you press the Camera key (
White Balance
), the
White Balance allows you to adjust video quality according to
available light.
camcorder records a lighter or darker video according to
your selected Brightness setting.
1. In camcorder mode, press the Settings button, then select
Camcorder Tab ➔ White Balance
.
Camera-Camcorder
90
The options are:
Camcorder Tab ➔ Effects. The following options appear in
the display.
• Auto — The camcorder automatically adjusts color balance to
available light.
Note: Choose Normal to disable Color Effects.
• Daylight — Use this setting when recording videos in full sun.
• Cloudy — Use this setting when recording videos in cloudy
• Normal — Subjects and pictures appear with a normal hue.
• Green — Subjects and pictures appear in a greenish hue.
• Negative — Subjects and pictures appear in inverted colors.
• Sepia — Subjects and pictures appear in a brownish-gray hue.
• B & W — Subjects and pictures appear in black and white.
• Aqua — Subjects and pictures appear in an aqua hue.
2. Select the color effect of your choice, then press the OK
button. You’re returned to the camcorder viewfinder
screen.
conditions.
• Tungsten — Use this setting when recording videos under
incandescent lights.
• Fluorescent — Use this setting when recording videos under
fluorescent lights.
2. Select the White Balance you wish to use, then press the
OK button. The camcorder viewfinder screen appears in
the display with your selected White Balance applied.
The next time you press the Camera key (
), the
camcorder applies the selected White Balance to your
video.
When you record your next video, the phone’s display
previews your subject image with the selected color effect.
Camcorder Settings — Common Tab
Effects
Default storage
Change the look of your videos with Color Effects. Choose from
six available settings such as Green, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
1. In camcorder mode, press the Settings button, then select
Common Tab ➔ Default storage. The following Memory
options appear in the display:
1. In camcorder mode, press the Settings button, then select
• Phone Memory — Stores videos in phone memory.
91
• Card Memory — Stores videos on an optional microSD Memory
Card.
• On
2. Select the AlltelMypics reminder setting of your choice,
then press the OK button. You’re returned to the camcorder
viewfinder screen.
2. Select the memory location setting of your choice, then
press the OK button. You’re returned to the camcorder
viewfinder screen.
Start Sound
Auto Save
Choose from two different sounds whenever you begin video
recording. Aside from being a cool sound effect, Start Sound acts
as an audible reminder that your camcorder has begun recording
a video.
1. In camcorder mode, press the Settings button, then select
Common Tab ➔ Auto Save. The following options appear in
the display:
1. In camcorder mode, press the Settings button, then select
Common Tab ➔ Start Sound. The following Memory
options appear in the display:
• Off
• On
2. Select the automatic save setting of your choice. You’re
returned to the camcorder viewfinder screen.
• Off
• Beep
AlltelMypics reminder
• Look here
After you record a video and press the Save button, AlltelMypics
reminder prompts you to send a copy of your video to your Alltel
Mypics folder.
• 1,2,3!
2. Select the desired start sound, then press the OK button.
You’re returned to the camcorder viewfinder screen.
1. In camcorder mode, press (
), then select Common Tab
➔
AlltelMypics reminder. The following options appear in
the display:
• Off
Camera-Camcorder
92
End Sound
2. Press and slide to browse pictures in the gallery.
Choose from two different sounds whenever you stop video
recording. Aside from being a cool sound effect, End Sound acts
as an audible reminder that your camcorder has stopped
recording a video.
3. To send the currently displayed or highlighted picture as a
Picture message, press the Send soft key.
4. To buy and download images from the Internet, press the
Buy Images soft key.
1. In camcorder mode, press the Settings button, then select
Common Tab ➔ End Sound. The following Memory options
appear in the display:
5. To delete selected unlocked pictures from the My Images
folder, press the Erase soft key. Locked pictures must be
unlocked before you can erase them.
• Off
• Beep
6. For more options, press the More soft key. The following
additional options pop-up:
• OK
• Melody
• Camera — Launches the camera.
2. Select the desired end sound, then press the OK button.
You’re returned to the camcorder viewfinder screen.
• Postcard — Lets you overlay a selected image with drawing(s) or
handwriting, then save the new postcard and send it in a Picture
The Photo Gallery
• Move — Relocate the currently displayed or highlighted picture
from phone memory to a Memory Card or from a Memory Card to
phone memory.
Saved pictures are stored in the My Images folder. You can
browse the pictures one at a time (expanded mode), or view
several pictures at once in thumbnail format.
• Copy — Copy one or more images from phone memory to card
1. In the Camera viewfinder screen, press the Gallery button.
Any pictures that you’ve saved are listed with their
thumbnail images in the display.
memory or from card memory to phone memory.
• Lock/Unlock — Prevent/allow erasure of one or more images.
93
–
Lock / Unlock — Lock the currently displayed or highlighted picture
so that it cannot be deleted, or unlock the picture so that it can be
deleted.
• Print — Print one or more images on a Bluetooth-compatible
printer.
7. To view an image, select it. While viewing an image, you
–
–
–
Print — Print the image on a Bluetooth-compatible printer.
have the following options:
Slide Show — Show the images as a full screen slide show.
•
•
•
•
•
•
To magnify the image, press
To create a Postcard, press
.
.
Image Info — View the Title, time and date created, size, and
resolution of the currently highlighted or displayed picture.
8. Select the desired option to perform its function or to enter
To expand the image to fill the display, press
.
To send the image in a Picture message, press the Send soft key.
its sub-menu.
To buy and download images, press the Buy Images soft key.
Creating and Sending Postcard Messages
To assign the image as the standby screen Wallpaper or as a
Picture ID for someone in your Contacts list, press the Set As soft
key.
Postcard lets you quickly send photos overlaid with handwritten
messages as Picture messages, rather than using the keypad to
enter your message. You can also include a sound file and
keypad-entered text.
•
To access more options, press the More soft key. The following
additional options pop-up:
1. In the Camera viewfinder screen, press the Gallery button.
Any pictures that you’ve saved are listed with their
thumbnail images in the display.
–
–
Camera — Launches the camera.
Erase — Deletes the image from the My Images folder, provided the
image is unlocked.
–
Move to card phone — Relocate the currently displayed or
/
2. Select the desired picture, then press the Postcard button.
highlighted picture from phone memory to a Memory Card or from a
Memory Card to phone memory.
– Or –
–
–
Copy to card phone — Copy one or more images from phone
/
Press the More soft key, then select Postcard, select the
memory to card memory or from card memory to phone memory.
desired picture, and press the Postcard soft key.
Rename — Rename the currently displayed or highlighted picture.
Camera-Camcorder
94
You are prompted to save your postcard as an Image (JPG)
Lets you select the line thickness for art or writing
using the Pen drawing tool.
file or as a Flash (SWF) file.
3. Select the desired file format. The postcard message
Lets you remove selected or all stamps from your
postcard image.
screen appears in the display.
Lets you undo the previous line or letter made
with the Pen or the previous stamp image made
using the Stamp.
Lets you save your changes to your Postcard
image.
5. Press
to save your changes.
4. Use the following tools to add handwritten text or graphics
6. Press the Send soft key, then select Picture Message. The
to your postcard:
Picture Msg screen appears in the display.
Lets you select the Pen or the Stamp as your
drawing tool.
7. Address, compose, and send your Postcard as a Picture
Lets you select the color for art or writing using
the Pen drawing tool.
Lets you select the pattern for the Stamp drawing
tool.
95
•
With a video clip, a menu pops-up offering you the following
options:
Point, Click, and Send Pictures and Videos
Take a picture or record a video and send it to anyone with a
compatible device in a few easy steps.
–
–
–
Video Message
To alltel my pics
Via Bluetooth
1. In standby mode, press and hold the Camera key (
) on
the right side of the phone. The camera view finder screen
appears in the display.
Select Video Message. The Video Msg screen appears in the display
with the To list showing.
6. Enter the recipient’s phone number or e-mail address
2. If desired, press the Mode button. The camcorder view
using the keypad.
finder screen appears in the display.
7. Press the Done soft key to save the address(es).
3. Using the display as a viewfinder, take the desired picture
or record the desired video by pressing the Camera key
8. Press the Next soft key. Select other message fields as
(
), and then pressing the Stop button (
) to stop
video recording.
The photo/video review screen appears in the display.
9. When you are finished composing your message, press
Send soft key to send the Picture or Video message to the
intended recipient(s).
4. For a video clip, press the Save button. The camcorder
view finder screen appears in the display. Next, press the
Gallery button; then, if desired, select the new video clip.
5. Press the Send button:
•
With a photo, you are prompted to send the photo to Alltel my pic.
Select the preferred option. The Picture Msg screen appears in the
display with the To list showing.
Camera-Camcorder
96
Section 15: Music Player
Music Player lets you play music files (such as, CMX, MIDI, MP3,
AAC, AAC+, and eAAC+) stored on a microSD™ Memory Card
(up to 8 GB).
Music Player Controls
1. Music Library button
Launches the
Music Library
menu.
This section describes your phone’s Music Player functions and
key features associated with multimedia.
AccessingtheMusicPlayer
2. Selection Information
area — Shows album
cover image, selection
title/file name, artist, and
album name, if available.
Note: A microSD™ Memory Card must be
installed for the Music Player to
ᮣ
In standby mode, press the
3. Equalization and
Menu soft key, then select
Repetition controls — Set the equalization (Normal Rock,
,
Multimedia
➔
Music Player.
Jazz, or Classic – only active when you use a headset),
The Music Player screen
repetition, and shuffle.
appears in the display.
4. Progress bar — Indicates progress of playback.
97
5. Elapsed Time and Total Time — Show how many hours,
minutes, and seconds of the music file have been played
and shows how long the music file is in hours, minutes,
and seconds.
Browsing for a Music File to Play
To select a music file to play:
1. From the Music Player screen,
press the Music Library
button (
) in the upper
6. Playback controls
left corner of the screen.
Adjusts playback volume.
The Music Library screen
appears in the display listing
the following options:
Changes playback to previous music file in
playback list.
• Now playing — Lists all music
files you have selected to play.
Starts/resumes music file playback.
• All tracks — Lists all music files stored in the My Music folder on a
microSD Memory Card by their file names.
Pauses music file playback.
• Playlists — Lists any music file Playlist(s) you have created.
Changes playback to next music file in playback
list.
• Artists — Lists all available recording artists names with music
files stored on a Memory Card.
• Albums — Lists all available album titles for music files stored on a
Music Player Soft Keys
Memory Card.
•
Details — Launches the Details screen which shows Title, Artists
names, Album title, Genre, File Name, and Encoding Format for the
music file currently playing.
2. Select what music file group you wish to access. A list of
music files appears in the display.
3. To play a music file, select the file. The Music Player screen
•
Minimize — Closes the Music Player screen, but playback continues.
appears in the display and the selected file begins playing.
Music Player
98
4. To add a file to a Playlist, press the Add to Playlist soft key.
3. Enter the first few characters of the file, Playlist, artist, or
album you wish to find, depending upon which Library
The Add to playlists screen appears in the display.
•
Select a music file to add to a Playlist. A check mark appears in the
check box for that file.
•
•
Press the Save soft key. The Playlists screen appears in the display.
4. Press the Done soft key. A list of the files, Playlists, artists,
or albums with names that match your text entry appears
in the search screen.
Select the Playlist to receive the selected music files. The selected
playlist opens to show the added files.
•
Press the Save soft key. The Playlists screen appears in the display.
5. Select the file you wish to play. The Music Player screen
Searchingfor aMusicFiletoPlay
1. From the Music Player screen,
press the Library button
appears in the display and the selected file begins playing.
6. To add a file to a Playlist, press the Add to Playlist soft key.
(
) in the upper left
The Add to Playlist screen appears in the display.
corner of the screen, then
select a Library option (such
as All Tracks).
•
Select a music file to add to a Playlist. A check mark appears in the
check box for that file.
•
•
Press the Save soft key. The Playlists screen appears in the display.
Select the Playlist to receive the selected music files. You are
returned to the All Tracks list.
2. Select the <Tap here to find>
field. The 3X4 Keypad screen
appears in the display.
Creating a Playlist
1. From the Music Player screen, press the Music Library
button (
) in the upper left corner of the screen.
The Music Library screen appears in the display listing the
following options:
99
• Now playing — Lists all music files you have selected to play.
The Create Playlist screen
• All tracks — Lists all music files stored in the My Music folder on a
appears in the display.
microSD Memory Card by their file names.
4. Enter a name for your new
• Playlists — Lists any music file
Playlist(s) you have created.
Playlist.
• Artists — Lists all available
recording artists names with
music files stored on a Memory
Card.
5. The Playlists screen appears
in the display containing your
new playlist.
• Albums — Lists all available
album titles for music files stored
on a Memory Card.
6. Press the down arrow button
in the upper right corner of
the screen, then select a
2. Select Playlist. The Playlists
Library option to select music
to add to your new Playlist.
screen appears in the display.
3. Press the Create soft key.
7. Press the Add Songs soft key. The Add Songs screen
appears in the display.
8. Select a music file to add to a Playlist. A check mark
appears in the check box for that file. Repeat this step as
needed.
9. Press the Save soft key. The Add to Playlist screen shows a
list of available Playlists.
Music Player
100
10. Select your new Playlist. You are returned to the Library
option screen you previously chose.
11. Press the down arrow button in the upper right corner of
the screen, then select Playlists. A list of available Playlists
appears in the display.
12. Select your new Playlist. Your Playlist screen appears in
the display showing the newly added files.
101
Section 16: Multimedia
This section outlines your phone’s multimedia functions and key
features associated with multimedia.
2. Select a sub-menu to launch it. The following sections
describe the above listed sub-menus in greater detail.
Accessing Multimedia
My Images
1. In standby mode, press the Menu soft key, then select
Multimedia. The following Multimedia sub-menus appear
in the display:
The My Images folder stores pictures you have taken with your
phone’s camera and images you have downloaded. My Images
lets you choose a picture or image to do the following:
•
•
•
Appear in your phone’s display while in standby mode (wallpaper).
Serve as picture ID for one of your contacts.
• Camcorder — Lets you launch and set up your phone’s
Be sent to another phone as part of a Picture message or over a
Bluetooth connection.
•
Serve as the background for a Postcard message.
1. From the Multimedia menu, select My Images
.
If there are no pictures stored in your phone or on a
memory card, “No Image” appears in the My Images
screen.
• My Images — Lets you choose the multi-media or pictures that
appear in your phone’s display.
• My Videos — Lets you choose the videos that appear in your
phone’s display.
•
To launch the camera to take a picture, press the More soft key and
• My Ringtones — Lets you assign melody tones for calls, alarms,
and other alerts.
• My Sounds — Lets you assign melody tones for calls, alarms, and
other alerts.
•
To purchase and download images, press the Buy Images soft key,
Multimedia
102
–
Camera — Launches your phone’s camera, so you can take new
pictures.
If there are pictures stored in your phone or on an optional
Memory Card, up to seven thumbnail images of your
pictures appear in the display.
–
–
Erase — Deletes one or more selected, unlocked pictures.
Move to card
to the memory card or from the memory card to the phone.
Copy to card phone — Lets you copy the picture from the phone to
/
phone — Lets you move the picture from the phone
Tip: You can also access My Images from:
–
/
-The Camera screen, by selecting the Gallery button.
the memory card or from the memory card to the phone.
–
–
–
Rename — Lets you rename the picture.
-The Edit Contact screen, by selecting the picture ID field and then
selecting the My Images option.
Lock Unlock — Lets you protect the picture from being deleted.
/
Print — Sends a printout of the picture to a Bluetooth-compatible
printer.
2. Select a picture to enlarge it for easier viewing.
3. While viewing a picture, the following options are
available:
–
–
Slide Show — Shows the available images as a sequence of full-
screen pictures.
Image Info — Displays information about the picture, such as the
• Zoom button — Lets you magnify the current image.
picture Name, creation Date and Time
Size
Select the desired option.
,
Resolution, and the data
• Postcard button — Lets you use the current image to create a
.
My Videos
• Full screen button — Expands the current image to fill the display.
My Videos lets you take videos, review your videos, send them as
video messages, and assign your videos as wallpaper on your
phone.
• Send soft key — Lets you send the selected image to a specified
recipient in a Picture message or to Alltel My Pics, or via Bluetooth.
• BuyImages soft key — Launches the Alltel Web browser, enabling
you to find, purchase (as needed), and download images.
1. From the Multimedia menu, select My Videos
.
• Set As soft key — Lets you assign the selected picture as the
If there are no videos stored in your phone or on a memory
Picture ID for a Contact or as the Wallpaper for the idle screen.
card, “No Video” appears in the Videos screen.
• More soft key — Lets you access the following additional options:
103
If there are videos stored in your phone or on an optional
Memory Card, up to seven thumbnail images from your
videos appear in the Videos screen.
6. To move a video from the phone to a Memory Card or from
a Memory Card to the phone, press the Move soft key.
7. For more My Videos options, press the More soft key. The
following options appear in the display:
2. To take a new video, press the More soft key and select the
Camcorder option. The camcorder view finder screen
appears in the display. (For more information, refer to
• Camcorder — Lets you record a new video clip.
• Copy — Lets you copy a video clip from the phone to the memory
card or from the memory card to the phone.
• Lock / Unlock — Lets you protect a video from being deleted.
3. To play a video, select it. The
Video Player screen appears
in the display and begins
8. Select the desired option.
Video Player
Your Delve phone includes a Video Player capable of playing 3gs
and MP4 video files. To launch the Video Player:
playing the highlighted video.
4. To send a video as part of a
video message, press the
information, refer to “Creating
and Sending a Video
1. From the Videos screen, select a video. The Video Player
screen appears in the display and the selected video
begins playing.
2. To send a video as part of a video message, press the Send
5. To delete one or more video
3. To delete one or more video clips from the My Videos
clips from the My Videos folder, press the Erase soft key.
folder, press the Erase soft key.
Multimedia
104
4. To view the video in the largest size possible for the Delve,
6. To select another video for playback, press
in the
press the Full Screen soft key.
upper left corner of the screen.
My Ringtones
My Ringtones lets you assign ringtones (preloaded and
downloaded) for calls, alerts, and as distinctive ringers for
Contacts.
1. From the Multimedia menu, select My Ringtones. A list of
ringtones appears in the display.
Tip: You can also access My Ringtones from:
5. For more Video Player options, press the More soft key. The
following options appear in the display:
-A Alarm screen by selecting the Alarm Tone option.
-The Edit Contact screen by selecting the
option.
• Camcorder — Lets you record a new video clip.
• Move to card — Lets you move the video clip to an optional
2. When accessing My Ringtones from an Alarm or a Contact,
select a particular ringtone. A dot appears in the selected
ringtone’s radio button, and the ringtone begins playing.
Memory Card.
• Copy to card — Lets you save a copy of the video clip to an
optional Memory Card.
• Rename — Lets you change the name of this video clip.
• Lock / Unlock — Lets you protect the video from being deleted.
• Video Info — Displays information about the video, such as the
•
•
To stop ringtone playback, select the ringtone a second time.
To assign the highlighted ringtone to the Alarm or Contact, press
the Set as button.
video Name, creation Date and Time
,
Resolution, data Size, and
3. When accessing My Ringtones from the Multimedia menu,
assign the highlighted ringtone by pressing the Set As
button. The following options appear in the display:
the Duration
.
105
• Ringtone — Lets you assign the selected ringtone to incoming
voice calls.
Tip: You can also access My Sounds from:
-A Set Alarm screen by selecting the Alarm Tone option, then pressing
the My Sounds soft key.
• Contact ID — Lets you assign the selected ringtone as the
distinctive ringer for a Contact.
-The Edit Contact screen by selecting the
option and pressing the
• Alert Tone — Lets you assign the selected ringtone to All
My Sounds soft key.
Messages
,
TXT Message, Picture-Video Message, or Voicemail
Message
.
2. Press the Record New soft key to record a voice memo.
4. Select the desired option.
5. When using a downloaded ringtone, press the Options soft
key and the following options appear in the display:
3. Selecting a sound file to hear it played. The Sound Player
screen appears in the display. The following soft keys are
available:
• Erase — Erases one or more selected files or All files.
• Lock / Unlock — Lets you prevent/permit file deletion.
• Send Via BT — Sends a copy of the ringtone file to another device
over a Bluetooth connection.
• Record New — Launches the Voice Recorder, allowing you to
record a voice memo.
• Ringtone Info — Displays information about the selected file, such
as the file name, the file type, and the data size.
• Send — Lets you send the selected sound file to a specified
recipient ro device.
6. Select the desired option.
–
–
–
Picture Message — Launches the Picture Msg screen with the
selected sound file populating the Sound field, allowing you to send the
message containing the file to a selected recipient.
My Sounds
My Sounds lets you record voice memos and lets you assign
preloaded and downloaded sound files as ringers for calls,
alarms, and other alerts.
To alltel my pix — Lets you send the selected sound file to an Online
Album on your wireless provider’s server. For details, contact your
wireless provider.
1. From the Multimedia menu, select My Sounds
.
Record New
Via Bluetooth — Lets you send a copy of a selected sound file to
another Bluetooth device over a Bluetooth connection with your Delve.
and a list of sound files appears in the display.
Multimedia
106
• Set as — Lets you set the selected sound file as a Ringtone, a
Contact ID, or as an Alert Tone.
You can save as many voice memos as will fit in the empty
memory capacity.
4. For recorded sound files, access other options by pressing
Record a Voice Memo
the More soft key.
1. From the Multimedia menu, select My Sounds then press
the Record New soft key. The following options appear in
the display:
• Erase — Erases the selected sound file.
• Rename — Lets you rename the sound file.
• Lock / Unlock — Lets you protect the sound file from being
• Until Memory Full — Recording continues until you press , or until
deleted.
all available memory is used.
• Sound Info — Displays information about the sound file, such as
the file name, file size, file type, date, and time.
• Limit for Message — Recording continues for no more than 1
minute.
5. Select the desired option.
2. Select the desired option. The Voice Recorder screen
Voice Memo
appears in the display.
You can use your phone to record
voice memos and other sound files
for later playback or assignment as
ringers. (For more information, refer
Note: The maximum length for a voice
memo in “Limit for Message” mode
is 60 seconds. In “Until Memory Full”
mode, the time limit is determined by
available memory.
107
3. Press the Record button
), then start speaking.
2. Select the voice memo you
wish to review to play it. The
Sound Player screen appears
in the display.
(
As it is recording the phone
displays a countdown timer
that shows the seconds
•
To stop the memo playing, press
. Press
to restart playing
remaining for the recording.
the memo.
•
To pause the memo, press the
Pause button. When a memo is
paused, select Resume to
continue recording.
When the voice memo
finishes playing, the selected
voice memo remains
highlighted in the list of sound
files.
4. Once you’re finished
recording, press the Stop
button. The new recording is saved, and the My Sounds
screen appears in the display.
Erase One or More Voice Memos
1. From the Multimedia menu, select My Sounds. A list of
sound files appears in the display.
Review Voice Memos
If you’ve saved any voice memos, you can review them anytime.
1. From the Multimedia menu, select My Sounds. A list of
sound files appears in the display.
2. Press the Erase soft key. The Select to erase screen
appears in the display.
3. Select the Voice Memo(s) you want to erase. A check mark
appears in each Voice Memo’s check box.
Multimedia
108
Section 17: Tools
This section explains how to use your phone’s digital assistant
functions to view today’s calendar, schedule events, set
reminders, perform calculations, and more.
2. Select the desired sub-menu.
Voice Commands
To access the Voice Commands menu:
Accessing Your Phone’s Tools
To launch the Tools menu:
1. In standby mode, press and hold the Voice Recognition key
(
), on the right side of the phone.
ᮣ
In standby mode, press the Menu soft key, then select
Tools ). The Tools menu appears in the display.
Voice Service
– Or –
(
From the Tools menu, select Voice Service
Commands
➔
Voice
.
Your Delve includes state-of-the-art voice recognition software
that lets you use your voice to dial numbers, access your
Contacts list, and open Tools. To access your phone’s voice
recognition, do the following:
Tip: You can also set your phone to start VoiceSignal when you connect an
1. At the Tools menu, select Voice Service. The following
“
Say a Command” appears in the display and is
options appear in the display:
pronounced through the earpiece, followed by a list of
available commands:
• Voice Commands — Lets you place calls, access your Contacts
List, review your appointments, and more by speaking commands
• Call — Lets you dial the phone by saying any name stored in your
contact list, without ever having to record, or “train” that name.
VoiceSignal automatically voice-activates all your contacts, even if
you have hundreds of them stored on your phone. You can also dial
any telephone number, even if it is not stored in your contact list, by
• Voice Settings — Lets you tailor VoiceSignal to better respond to
your voice and your phone use preferences. (For more information,
109
saying the digits in the number. (For more information, refer to
If VoiceSignal does not recognize a command, it prompts
you to repeat the command.
• Send Text — Lets you access Create Text Message.
If VoiceSignal still does not recognized the command, it
tells you “No match found” and offers you the option of
selecting Settings or Repeat before canceling voice
recognition.
• Send Picture — Lets you access Create Picture Message.
• Lookup — Lets you find a Contact by name and review the
Contact’s information.
• Go to — Lets you access the following list of your phone’s features
and functions:
Voice Command Tips:
–
–
–
–
–
–
–
–
–
–
–
–
Messages
Alltel Shop
Alltel Web
Contacts
Calls
Multimedia
Tools
Settings
Phone Info
E-Mail
TV on Demand
Navigation
•
Make sure you wait for the beep and/or “Listening ...” pop-up before
speaking.
•
Speak clearly at a normal volume, as if you were talking on the phone.
Voice Settings
Confirmation
You can select whether and when VoiceSignal asks for
confirmation of your responses when using the Call command.
1. From the Tools menu, select Voice Service
➔
Voice Settings
➔
Confirmation. The following options appear:
• Automatic — Voice Service asks for your confirmation only when it
is not sure if it has correctly recognized the name or number.
• Check — Lets you say a single command (such as “Status”) to
verify your phone's: Status Signal Strength Network Battery, or
My Phone Number
• Always Confirm — Voice Service always asks for your
,
,
,
confirmation.
.
• Never Confirm — Voice Service never asks for your confirmation.
2. Speaking clearly, say the command that you want to use.
Tools
110
2. Select your preferred setting.
•
•
If you make a mistake while recording a phrase, or if there is an
unexpected noise that spoils the recording, re-record that phrase.
3. To save your selection, press the OK soft key. To discard
Only use Adaptation if you are regularly having problems with Voice
Service. Once you adapt Voice Service, it will not work as well for other
people using your phone. (You can always reset Voice Service to its
original state, as described below.)
the new setting, press
. You are returned to the
Voice Settings menu.
Adaptation
Adapt Voice
If you regularly have trouble with Voice Service not recognizing
the commands, names, and/or numbers you say, try adapting
Voice Service to your voice. Adapting can improve the accuracy
of Voice Service responses, especially for people with strong
regional accents.
To adapt Voice Signal to your voice, do the following:
1. From the Tools menu, select Voice Service
Adaptation. The Adaptation screen appears in the
display showing the Adapt Voice option.
➔
Voice Settings
➔
Note: After you adapt Voice Service, it is customized to your voice, and your
voice only. Others will not be able to use your Voice Service on your
phone unless they reset it to factory defaults.
2. Select Adapt Voice. Your phone displays text describing the
Adapt Digits process.
3. Press the Start soft key. Your phone displays the first
phrase or digit sequence and says “Please say” through
the speaker followed by the phrase or digit sequence
appearing in the display.
Adaptation involves recording your responses to several
sequences of phrases. The recording process takes a couple of
minutes.
Tips for Adapting Voice Service:
•
•
•
•
Use Adaptation in a quiet place.
4. Wait for the beep and say the phrase or digits using your
normal tone of voice. Adaptation continues the recording
process with the next phrase or set of digits.
Do not use a headset during Adaptation.
Make sure you wait for the beep before starting to speak.
Speak clearly, and say each phrase distinctly.
111
After 15 phrases and sets of digits, adaptation ends and
2. Select the preferred setting.
your are returned to the Adaptation screen.
3. Press the OK soft key to accept the new setting. Press
to discard the new setting and return to the Voice
Settings menu.
Reset Voice
To reset Voice Service to factory default settings, do the
following:
Voice Launch
1. From the Tools menu, select Voice Service
➔
Voice Settings
To set the key or action that launches Voice Service, do the
following:
➔
Adaptation Reset Voice. The phone prompts you to
➔
confirm voice adaptation reset.
1. From the Tools menu, select Voice Service
Voice Launch. The following options appear in the
display:
➔
Voice Settings
➔
2. Press the Yes soft key to reset your voice adaptation, or
press the No soft key to keep your voice adaptation.
• Key Only — Press and hold the Voice Recognition key (
) to
Modes
activate Voice Service.
Modes lets you specify whether Voice Service is to read prompts
and/or on-screen text to you when you are using your phone’s
menus.
• Key/EarMic — Attach a headset to your phone. Press and hold the
Voice Recognition key (
to activate Voice Service.
) or press the button on the headset
1. From the Tools menu, select Voice Service
➔
Voice Settings
2. Select the preferred setting.
➔
Modes. The following options appear in the display:
3. Press the OK soft key to accept the new setting. Press
to discard the new setting and return to the Voice
Settings menu.
• Expert Mode — Voice Signal plays a beep when it requires
information from you.
• Prompt Mode — Voice Signal plays audio prompts for required
information.
• Readout Mode — Voice Signal reads on-screen text and plays
audio prompts for required information.
Tools
112
About
send or receive information via Bluetooth. To save battery life or
in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology
headset.
This option displays version and build information about the Voice
Service software included on your phone.
ᮣ
From the Tools menu, select Voice Service
About
➔
Voice Settings
Turn Bluetooth On
➔
.
1. From the Tools menu, select
Bluetooth. The Bluetooth
screen displays.
The About screen appears in the display showing the
version level of the Voice Service software currently
installed on your phone.
2. Press the Turn On soft key.
Bluetooth
•
•
•
“Bluetooth Power On” pops-up
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
in the display.
The blue Bluetooth On icon
(
) appears on the status bar.
The SEARCH button becomes
highlighted in blue.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within a range of
one another, you can exchange information between them, even
if they are located in different rooms.
Turn Bluetooth Off
1. From the Tools menu, select Bluetooth. The Bluetooth
screen displays.
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
2. Press the Turn Off soft key. “Bluetooth Power Off” pops-up
in the display, the SEARCH button highlighting disappears,
and the blue Bluetooth On icon ( ) disappears from the
status bar.
Turn Bluetooth On/Off
When the Bluetooth is turned on, you can use the Bluetooth
features available. When the Bluetooth is turned off, you cannot
113
Add New Device
The Device Info screen appears in the display, showing the
selected device’s name, Type, Status, and Address.
Searching for Available Bluetooth
Devices
5. Return to the Bluetooth screen by pressing the OK soft key.
1. From the Tools menu, select
Bluetooth. The Bluetooth
screen displays.
6. Press, hold, and slide the identified icon to overlap the
Search button. You are prompted to enter the passkey or
PIN for the selected device.
2. Place the Bluetooth device
you want to pair with your
Delve in discoverable mode.
(See the device user manual
for more information.)
7. Enter the device passkey or PIN and press the Done soft
key. (See the device user manual for more information.)
Pop-up messages appear and the SEARCH button and
selected device icon are highlighted in blue to inform you
that pairing with the device and connecting to it are
complete.
3. Press the SEARCH button.
Note: If Bluetooth is off, it automatically turns on.
Note: If you are pairing and connecting to another phone or to a personal
computer, both devices prompt for a passkey or PIN. To successfully
pair and connect your phone with the other device, the same passkey
or PIN must be entered on both devices.
Your phone searches for available Bluetooth devices.
Named icons for available devices appear in the display.
Note: When more than 5 devices are detected, additional icons are placed on
additional Bluetooth screen pages.
4. Identify the device you want to pair with your phone by
selecting an icon.
Tools
114
Paired Icons
2. Select Disconnect. The device icon’s blue highlighting
disappears.
The Bluetooth screen shows the
icons for Bluetooth wireless
technology devices paired with your
handset.
Managing Your Paired Icons
1. In the Bluetooth screen, press a device icon. A device
options list pops-up. The following options appear in the
display:
1. From the Tools menu, select
Bluetooth. Icons for
•
•
Disconnect — Lets you disconnect from the selected device.
registered Bluetooth devices
appear in the display.
Browse Files — Lets you view the folders and files on the
selected device and/or its memory card.
Connecting to a Bluetooth Device
•
•
•
Send Files — Lets you send copies of files on your Delve to the
selected device.
1. In the Bluetooth screen,
Rename — Lets you change or replace the device name, as
needed.
press, hold, and slide the icon
for the preferred device to overlap the SEARCH button. The
SEARCH button and the device icon flash and are
highlighted in blue to indicate the connection is complete.
Remove — Deletes the device from the Bluetooth screen.
• Service list — Lists the Bluetooth services supported by your
Delve.
2. If you are unable to connect with the device a pop-up
appears in the display. Press, hold, and slide the selected
icon to overlap the SEARCH button again.
•
Device Info — Shows the device name, Type of device, Status,
and device Address.
2. Select the desired option.
Disconnecting from a Bluetooth Device
1. In the Bluetooth screen, press the device icon. A device
options list pops-up.
115
Bluetooth Settings
Calendar
1. To access the Delve’s Bluetooth settings, in the Bluetooth
screen, press the Settings soft key. The Phone Settings
screen appears in the display showing the following
options:
Calendar lets you view the current,
past, or future month in calendar
format. While viewing the calendar,
the current date is highlighted, and
days with scheduled events are
surrounded by a box.
• Device Name — Shows your device’s name. You may change this
name. Just select the name and enter your text changes.
Navigating the Calendar
1. From the Tools menu, select
• Discovery Mode — Allows other Bluetooth devices to see your
device as accessible. Select On for other devices to see your
device, or Off for no visibility.
Calendar
.
• Address — Shows the Bluetooth Address of your phone. (This
The calendar appears in the
display with the current date
highlighted. The month and year appear at the top of the
display.
address is not changeable.)
2. To save your changes, press the Save soft key. Press
to discard your changes and return to the
Bluetooth screen.
2. Use the following controls to display a particular month
and to highlight a particular date in the Calendar screen:
• Left/Right buttons — Moves the date and screen back/ahead one
month per keypress.
• Goto soft key — Select a particular date.
Add a New Event
1. From the Tools menu, select Calendar
.
Tools
116
The calendar appears in the display with the current date
highlighted. The month and year appear at the top of the
display.
• End Time — Populated with a time one half-hour later that Start
Time. Select the time this event ends.
• Alarm Tone — Select a ringtone from My Ringtones, buy a
ringtone on-line, or select a sound file from My Sounds. When you
select a ringtone or sound, it plays.
• Repeat — Select Off
Every Year
/
Every Day
/
Every Week
/
Every Month
/
.
3. Press the New Event soft key. The New Event screen
7. Press the Save soft key to save your additional details
appears in the display.
settings.
8. To store this Event in your Calendar, press the Save soft
key. An alarm will notify you before the start of this Event,
if Alarm is set to a value other than Off
5. Select each of the following New Event options:
.
• Start Date — Populated with highlighted Calendar date. Select the
date this event begins.
View/Change an Event
1. From the Tools menu, select Calendar
.
• Start Time — Populated with the current time (rounded to the
nearest half-hour). Select the time this event begins.
A calendar appears in the display with the current date
highlighted. The month and year appear at the top of the
display.
• Alarm — Select Off
Before 1 Day Before
particular number of minutes, hours, or days before the Start Date
and Start Time)
/
10 Mins Before
/
30 Mins Before
/
1 Hour
/
/
1 Week Before
/
Customize (select
.
page 116.) The calendar is replaced by the Daily View for
the selected date, listing all events scheduled for this date.
6. For additional New Event options, press the Set Details soft
key.
• End Date — Populated with highlighted Calendar date. Select the
date this event ends.
117
3. Select an Event to view. The current settings for the
Memo Pad
selected Event appear in the display in a scrollable list.
Create notes and store them in
Memo Pad. Notes that you create in
Memo Pad can’t be prioritized or
assigned an alert. Return to Memo
Pad anytime to review and edit your
notes.
•
•
•
To remove the event from the calendar, press the Erase soft key.
(You are prompted to confirm the erasure.)
To return to the Daily View list, press
.
Create a Memo
4. For other options, press the More soft key. The following
1. From the Tools menu, select
Memo Pad. A list of any stored
Memos appears in the
display.
options appear in the display:
• Monthly View — Returns you to the Calendar screen.
• Erase — Remove this event from the Calendar.
5. Select an option to invoke its function.
2. To add a Memo, press the New Memo soft key. A blank
Memo screen appears in the display.
4. When you’re finished entering details for the Memo, press
the Done soft key. The Memo is saved.
5. To discard this Memo, press and hold
to erase the
memo text, then press
again to return to the Memo
Pad screen.
Tools
118
Review, Edit, Erase, and Send Memos
1. From the Tools menu, select Memo Pad. A list of any stored
Memos appears in the display.
Alarm Clock
Your phone has three alarm clocks that you can set to go off
once, or to recur daily at a specific time. Once set, an alarm clock
is easy to change or turn off completely.
2. To review a Memo, select it. The text of the Memo appears
in the display in a scrollable screen.
Note: The Alarm Clock doesn’t function when the phone is turned off. If the
time for an alarm that was set for Once has elapsed while the phone is
off, the alarm sounds at the specified time on the next day.
3. To edit a Memo, select it and press the Edit soft key. The
Memo text appears in a text entry screen. (For more
Set an Alarm
1. From the Tools menu, select
Alarm Clock. The Alarm
screen appears in the display,
listing any currently set
alarms.
•
To save your changes and return to the Memo Pad screen, press
the Done soft key.
•
To discard your changes and exit Memo Pad, press
are prompted to confirm your wish to exit Memo Pad.
. You
4. To erase a Memo, select it and press the Erase soft key.
You are prompted to confirm the erasure.
2. Press the New Alarm soft key.
The following Alarm options
appear in the display:
5. To send a memo as a text message, select the memo, then
press the Send text message soft key. The memo text
appears in the Text Msg screen as part of the message
text.
• Alarm Name — Populated with
the default name, Alarm. To
change, select this field and
119
• Alarm Time — Populated with the current time. To change the
time, select this field, select a new time, and press the Set soft key.
Note: If the alarm is set to repeat on one or more days, the alarm icon
remains in the top of the display.
• Alarm Repeat — Select the day(s) of the week (Sun Sat) on
which this alarm is to sound. The alarm will sound every week on
the day(s) selected.
–
If the alarm was set as a once only alarm (no repeat day selected), the
alarm icon disappears from the top of the display.
• Alarm Tone — Populated with Alert 1. To change, select this field,
select the preferred ringtone in the My Ringtones screen, then
press the Set soft key.
Turn Off an Alarm
1. From the Tools menu, select Alarm Clock. The Alarm screen
appears in the display, listing any currently set alarms.
• Alarm Volume — Press and slide to set to the preferred volume.
• Alarm Snooze — Select On to enable snooze timer for this alarm,
2. Press the Off button on the Alarm you wish to turn off.
then select values for the following options:
Erasing an Alarm
–
–
Snooze Duration — Select 1 min
Snooze Repeat — Select Once Twice
Times
,
2 min
,
3 min
,
5 min, or 7 min
.
1. From the Tools menu, select
Alarm Clock. The Alarm
screen appears in the display,
listing any currently set
alarms.
,
,
3 Times,
5 Times, Or 10
.
3. When you’re finished selection option values for the alarm,
press the Save soft key. If the Alarm is set to On, the alarm
icon (
) appears in the top of the display.
When an Alarm Sounds
2. Press the Erase soft key. The
Select to erase screen
An animated alarm clock appears in the display and an alert
sounds when the specified time for the alarm arrives.
appears in the display.
ᮣ
To silence the alarm, press and slide
shown) or Stop
to Snooze (if
3. Select the check box for the
.
Alarm you want to remove
from the list. A check mark appears in the selected box.
Tools
120
4. Press the Erase soft key. The selected Alarm is removed
Setting a World Clock
from the list.
The home clock is set to a default
time and city and is labeled with the
name of the city. To change this or
another World Clock setting, do the
following:
World Time
World Time lets you set up to four
clocks to the time of day or night in
any of the 24 different time zones
around the world.
1. From the Tools menu, select
World Time. The World Time
screen appears in the display
listing your current World
Clocks.
Note: To use World Time, you need to
subscribe to your Wireless Provider’s
digital service.
ᮣ
From the Tools menu, select
World Time. A list of your
selected clocks appears in
the display. The following
icons appear in the list:
2. Select the clock you wish to
set to a new time zone. The Add City screen appears in the
display.
3. Press and slide the map until you see the city whose time
you wish to select as this clock’s new time.
Indicates the clock set to your home (local) time.
Indicates your 2nd clock.
4. Select the city. The displayed time changes to the time for
the selected city.
121
5. Press the Save soft key. Your choice is saved and you are
2. Press the Add soft key. The
Add City screen appears in
the display.
returned to the World Time screen.
Enable Daylight Saving Time (DST)
1. In the Add City screen, on the
time display, press the DST
3. Press and slide the map until
you see the city whose time
you wish to select as this
clock’s new time.
icon (
). The icon
becomes highlighted and the
time display changes to
4. Select the city. The displayed
time changes to the time for
the selected city.
reflect the new DST setting.
2. Press the Save soft key. You
are returned to the World
5. Press the Add soft key. Your
choice is saved and you are returned to the World Time
screen.
Time screen. The changed
World Clock shows the DST
icon overlaying the Clock icon
Selecting Your 2nd Clock
(
).
Your 2nd Clock and your Home Clock both appear in the Clock
widget when you move it from the Widget Bar to the standby
screen. By changing your 2nd Clock, you can quickly and easily
keep track of the time in a new city and at home. (For more
Adding a World Clock
1. From the Tools menu, select World Time. The World Time
screen appears in the display listing your current World
Clocks.
Tools
122
1. From the Tools menu, select
World Time. The World Time
screen appears in the display
listing your current World
Clocks.
2. Press the Erase soft key. The
Select to erase screen
appears in the display.
Note: Your Home and 2nd clocks are
disabled in the Select to erase screen
to prevent them being erased.
2. Press the Set as 2nd Clock
3. Select the World Clock you
want to erase. A check mark
appears in the selected World
Clock’s checkbox.
soft key.
3. Select the World Clock you
prefer as your 2nd Clock. The
2nd check mark moves to
your selection.
4. Press the Erase soft key. You
are returned to the World Time screen in which the erased
World Clock no longer appears.
4. Press the OK soft key. Your selection is saved.
Erasing a World Clock
Calculator
World Time lets you erase all of your World Clocks except your
You can perform calculations, including addition, subtraction,
multiplication, division, and percentages using your phone.
Home clock (
) and 2nd clock (
).
1. From the Tools menu, select World Time. The World Time
screen appears in the display listing your current World
Clocks.
1. From the Tools menu, select Calculator. The Calculator
screen appears in the display.
123
2. Enter the first number in your
calculation using the
Stop Watch
You can use this function to set a
stop watch.
calculator-style touch
keypad. (Numbers can be up
to 15 digits long, and can
include a decimal point
followed by up to 5 more
digits.)
1. From the Tools menu, select
Stop Watch. The Stop Watch
screen appears in the display.
2. To start the Stop Watch count,
press the Start soft key.
3. Select the desired operation.
[You can nest calculations
using parentheses “( )”. To
delete your last entry, press
3. To record succeeding event/
lap times, press the LAP soft
key at the start of each
.]
succeeding event/lap to
record the completion time for the previous event/lap. You
can record up to eight event/lap times.
4. Use the keypad to enter the second number for your
calculation.
4. To stop the Stop Watch count, press the Stop soft key.
5. Press
to perform the calculation and view the result.
5. To resume the Stop Watch count, press the Restart key.
6. To erase all Stop Watch (lap) times recorded, press the
Reset soft key.
Tools
124
2. Select the conversion feature you wish to use.
Converter
The conversion menu provides the
following conversion categories:
3. Press the down arrow key and select the units to be
converted from.
•
•
•
•
•
•
Currency
Length
4. Enter the quantity you want converted in the field at the top
of the screen. The converted quantities appear opposite
their respective units of measure.
Weight
Volume
Area
Currency — Reviewing/Editing Exchange Rates
Temperature
The Currency Converter includes
long-term average exchange rates
as default values. To review and/or
change a default exchange rate to
the current exchange rate, do the
following:
Using Converters
To convert a currency, length,
weight, volume, area, or
temperature, do the following:
1. From the Tools menu, select Converter. The following list of
1. From the Tools menu, select
converters appears in the display:
Converter
➔
Currency.
• Currency
• Length
2. Press the View Rates soft key.
A list of exchange rates
• Weight
appears in the display.
• Volume
• Area
3. Select the exchange rate you
wish to change.
• Temperature
125
4. Enter the changed exchange
Currency — Adding Exchange Rates
rate value.
You can use the Currency Converter
to convert from and to obscure
currencies by adding exchange
rates for these currencies. To add a
currency and its exchange rate to
the Currency Converter, do the
following:
5. Press the Done soft key to
save the changed exchange
rate.
1. From the Tools menu, select
Converter
➔
Currency.
2. Press the View Rates soft key.
A list of exchange rates
appears in the display.
3. Use the left and right arrow buttons at the top of the list to
display the base currency for the new exchange rate.
4. Press the Add Rates soft key. A new line containing blank
exchange rate fields appears at the bottom of the
exchange rates list.
5. Select the currency identifier field.
Tools
126
6. Enter an identifier of up to 4 characters for the new
3. Press the Erase Rates soft
key. The Select to Erase
screen appears in the display,
listing those rates you can
erase.
7. Highlight the exchange rate field.
8. Enter a decimal exchange rate for the new currency using
the keypad.
Note: The Erase Rates soft key only
appears if there are user-added
currency conversion rates in the
Rates list.
Note: The Exchange Rate field only accepts up to seven characters (including
the decimal point) with up to five digits before or after the decimal
point (for example: 1234567, 0.12345, 1.23456, 123.456, 12345.6).
4. Select a user-added currency
exchange rate to be erased. A
check mark appears in the
9. To add the new exchange rate to the list, press the Done
soft key.
checkbox for the selected rate.
Currency — Erasing Exchange Rates
You cannot erase the preloaded currencies from the Exchange
Rate list. You can erase a currency that you have added to the list
by doing the following:
– Or –
Select Select All. Checkmarks appear in the checkboxes
for all user-added rates.
1. From the Tools menu, select Converter
➔
Currency.
5. Press the Done soft key. You are returned to the Rates List.
2. Press the View Rates soft key. A list of exchange rates
The erased rate no longer appears in the list.
appears in the display.
127
Tip Calculator
Tip Calculator automatically
calculates the following amounts:
•
•
Gratuity (tip)
Individual payment (for groups)
Calculations are based on the total
amount of the check, a selected
gratuity percentage, and the
number of people paying.
1. From the Tools menu, select
Tip Calculator. The Tip
Calculator screen appears in
the display.
2. Select the Bill field and enter the total amount of the bill.
3. Select the Tip field and enter a tip percentage.
4. Select the # Paying field and enter the number of persons
paying using the keypad.
5. The amount of the Tip, the bill Total, and the amount Each
person should pay appear in the lower half of the screen.
Tools
128
Section 18: Changing Your Settings
This section explains how to customize your phone to suit your
needs and preferences.
Widget
This function lets you select which
optional widgets appear in the
Widget Bar.
Settings Menu
ᮣ
To access the Settings menu, select Menu
➔
Settings. The
Settings menu appears in the display.
Location
1. From the Settings menu,
select Widget. The following
options appear in the display:
This function identifies your location to the network via the Global
Positioning System (GPS). You can set this function for
continuous operation or to operate only in the event that you dial
911.
• Clock — Displays current time.
• Date — Displays current date.
Note: Contact your Wireless Provider to determine whether, when, or where
• Images — Launches My
Images folder.
location-based services are available.
1. From the Settings menu, select Location. The following
• Mini Player — Plays music files in My Music folder on a microSD
Memory Card.
options appear in the display:
• Alarm — Lets you set alarm clock.
• Location On — GPS location setting is on whenever you make or
• Top5 — Launches the Favorites screen. Lets you access your
Contacts list and Contacts Groups as well.
receive a call, wherever the feature is available.
• 911 Only — GPS location setting is on only when you dial 911.
2. Select the desired Location setting. You’re returned to the
Settings menu.
• Sketchpad — Lets you draw images or handwrite text into a file.
• Voicemail — Checks your voicemail messages.
129
• Nutsie — Launches an Internet content portal which lets you
following options appear in the display:
access “cool” content files.
• Main Menu Style — Lets you choose whether the Main Menu
appears as a matrix of icons or as a list of menus.
• MyCast Weather — Displays weather report for entered ZIP code.
• Collapse — Launches a game.
• Wallpaper — Lets you choose the picture(s) that display(s) on your
phone when in standby mode.
• Calculator — Launches Calculator tool.
• Calendar — Launches Calendar tool.
• Banner — Lets you create your own personalized greeting that
appears in the display when your phone is in standby mode.
• Help — Lets you access your Wireless Carrier’s on-line Help
service.
• Backlight — Lets you set backlight options for the LCDs, keypad,
and set the brightness.
2. To enable/disable a particular widget, select the associated
option in the Widget screen. A check mark appears in/
disappears from the option’s check box.
2. Select the desired sub-menu. The following sections
describe the Display sub-menus in greater detail.
Main Menu Style
3. To enable/disable all available widgets, select Select All
/
Main Menu Style allows you to choose how the main menu
appears in your display. You are shown a preview of your choice.
Unselect All. A check mark appears in/disappears from all
the options’ check boxes.
1. From the Settings menu, select Display Settings
➔
Main
4. To save your new settings, select OK. You are returned to
Menu Style. The following options appear in the display:
the Settings menu.
• Grid — Display the main menu as a 3x4 grid of icons.
• List — Display the main menu in a list format.
2. Select the desired menu format.
Display Settings
Using the Display menu, you can set the menu style, set the
standby mode animation, customize the backlight settings, and
more.
3. Press the OK soft key to save your selection and return to
the Display Settings menu.
1. From the Settings menu, select Display Settings. The
Changing Your Settings
130
Wallpaper
To set an image without
previewing it, press the radio
button to the right of a
preferred picture or image. A
blue dot appears in the radio
button.
Wallpaper lets you choose the
pictures that appear in your phone’s
displays while in standby mode.
1. From the Settings menu,
select Display Settings
➔
Wallpaper. A scrollable list of
thumbnail images appears in
the display.
3. To save your choice, press the
Set soft key.
•
If you selected a “Preloaded”
image, you are returned to the
Display Settings menu.
•
To obtain additional images not
included with your phone, press
the Buy Images soft key.
•
If you selected a photo taken with
your phone’s camera or a downloaded image, the Set as
Wallpaper pop-up appears showing the following options:
2. To preview an image, select
the image. An expanded view appears in the display.
–
–
Fit to Screen — Resizes the selected image to fit the Delve display.
Rotate & Center — Rotates the selected image clockwise 90o and
– Or –
centers it on the screen.
–
Center image — Places the center of the selected image at the center
of the Delve display.
Select the preferred option. Your selected image is prepared and saved
as the new Wallpaper. You are returned to the menu.
131
Banner
Note: Prolonged backlight use drains your battery faster.
Create your own personalized greeting that appears in the
display while your phone is in standby mode.
1. From the Settings menu, select Display Settings
➔
1. From the Settings menu, select Display Settings
➔
Banner.
Backlight
➔
Backlight Time. The following options appear
The Banner screen appears in the display.
in the display:
• 7 Seconds
• 15 Seconds
• 30 Seconds
Note: If necessary, press and hold
to erase an existing banner.
2. Select the Banner field and enter a word or short phrase
(up to 32 characters) to appear in your phone’s display
• Always On (this setting uses much more power than the timed
settings)
• Always Dim
2. Select the desired Backlight Time setting.
3. Select the preferred Display setting: On (banner displays),
Brightness
Off (banner does not display).
Brightness lets you adjust the brightness of the backlight.
1. From the Settings menu, select Display Settings
Backlight Brightness. The Brightness screen appears in
the display.
4. Press the Save soft key to save the new/changed banner
➔
and return to the Display Settings menu.
➔
Backlight
Backlight Time
2. To adjust the backlight brightness, press, hold, and slide
You can set the backlight for your display to remain on or off or to
remain on for a specified period of time.
the Level button left or right.
3. To save your new setting, press the Save soft key.
Changing Your Settings
132
Charging Light
The Volume screen appears
in the display showing the
following options:
When set to On, the Charging Light displays a dimmed, animated
charging progress image appears when the Backlight dims with
a charger connected to the Delve.
• Master Volume — Controls the
loudness of all phone sounds.
1. From the Settings menu, select Display Settings
Backlight
➔
➔
Charging Light. The Charging Light screen
• Messages Volume — Controls
the loudness of the ringtone
played for incoming messages.
appears in the display.
2. Select the desired setting (On
/
Off). The blue dot moves to
2. Select the volume option you
want to change. The
the selected setting.
3. To save your new setting, press the OK soft key.
associated Volume screen
appears in the display.
Sounds Settings
3. Select the preferred Volume setting:
The Sounds Settings menu provides a variety of options to
customize audio properties for such things as ringers, keypad
tones alerts, and more.
•
•
•
•
•
Low
•
•
•
•
Low/Medium
Medium/High
Silence all
Medium
High
Volume
Volume lets you adjust the loudness of the sounds your Delve
produces.
Alarm only
1 beep
Vibrate only
1. From the Settings menu, select Sounds Settings
➔
Volume.
4. To preview your new setting, press the Play soft key. To
end the preview, press the Stop soft key.
133
5. To retain your setting, press the Set soft key. Your are
2. Select the desired option. A
related, scrollable ringtones
list appears in the display.
returned to the Volume screen.
6. To save your new settings and return to the Sound Settings
menu, press the OK soft key.
3. To assign a ringtone to the
selected option, select a
ringtone in the list.
Ringer Type
You can assign ringer types and melody tones for calls, alarms,
and other alerts, in the Ringer Type sub-menu.
4. To assign a sound file to the
selected option:
1. From the Settings menu, select Sounds Settings
Type
The following options appear in the display:
➔
Ringer
.
•
•
•
Press the down arrow in the
upper right corner of the screen.
Select Sounds. A sound files list
appears in the display.
• Voice Calls — Lets you set which ringtone, sound file, and/or one
of a set of ringtones and/or sound files plays when you receive a
voice call.
Select the preferred sound or record a new sound by pressing the
• Text Message — Lets you set which ringtone or sound file plays
when you receive a Text Message.
5. To retain your selection and return to the Ringer Type
• Pic/Video Message — Lets you set which ringtone or sound file
plays when you receive a Picture Message or Video Message.
screen, press the Set soft key.
6. To save your new ringer settings and return to the Sound
• Voicemail — Lets you set which ringtone or sound file plays when
you receive a Voicemail message.
Settings menu, press the OK soft key.
Changing Your Settings
134
Alerts
• Tone Level — Lets you set the volume for the key tones (Silence
all, Low, Low/Medium, Medium, Medium/High, High).
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, as well as
other options.
• Tone Length — Lets you set the length of the key tones (Normal,
Long).
2. To save your new setting and return to the Key Tone menu,
1. From the Settings menu, select Sounds Settings
➔
Alerts.
press the OK soft key.
The following Alerts options appear in the display:
Vibrating Alert
• Minute Beep — Sounds an alert ten seconds before each elapsed
minute of a call.
Vibrating Alert lets you set your phone to vibrate in sync with
ringtones and melodies your phone plays.
• Roaming — Sounds an alert when you leave your home service
area during a call.
1. From the Settings menu, select Sounds Settings
Vibrating Alert
2. Select On or Off
➔
• Call Connect — When you make a call, an alert sounds when the
.
call is answered.
.
• Power On — Plays a melody when the phone is being turned on.
• Power Off — Plays a melody when the phone is being turned off.
2. Select the desired Alert option setting (On or Off).
3. To save your new setting and return to the Sound Settings
menu, press the OK soft key.
Widget Effect
3. To save your new alert settings and return to the Sound
Settings menu, press the OK soft key.
Widget Effect lets you control the unique sound effects your
phone can produce when you use the Widget bar or individuals
Widgets.
Key Tone
Key Tone lets you select the volume and the length of the DTMF
tones that the Delve sends when dialing.
1. From the Settings menu, select Sounds Settings
Effect
2. Select On or Off
➔
Widget
.
1. From the Settings menu, select Sounds Settings
➔
Key
.
Tone. The following options appear in the display:
135
3. To save your new setting and return to the Sound Settings
• Caller ID + Ring — Phone rings and the display shows caller ID for
an incoming call.
menu, press the OK soft key.
• Name Repeat — Phone repeats displaying Contact name or caller
ID.
Call Settings
Call Answer
2. Select the desired call alerting method and press the OK
soft key to save your selection.
You can select a specific answer mode when you receive an
incoming call.
Auto Answer
1. From the Settings menu, select Call Settings
Answer
The following call answer settings appear in the display:
➔
Call
With Auto Answer enabled, your phone automatically answers
calls after a period of time that you select.
.
1. From the Settings menu, select Call Settings
➔
Auto
• Any Key — Press any key except the
or Left soft key to
Answer. The following settings appear in the display:
answer an incoming call.
• Off — Disables automatic answering of calls
• Send Key — Press
to answer an incoming call.
• After 1 Second — Phone automatically answers calls after 1
second
Tip: You can set your phone to answer calls automatically, without any input
• After 3 Seconds — Phone automatically answers calls after 3
seconds
2. Select the desired call answering method and press the OK
• After 5 Seconds — Phone automatically answers calls after 5
seconds
soft key to save your selection.
2. Select the desired call automatic answering setting and
Call Alert
press the OK soft key to save your selection.
1. From the Settings menu, select Call Settings
➔
Call Alert.
The following Call Alert settings appear in the display:
• Ring Only — Phone rings for an incoming call.
Changing Your Settings
136
Speed Dial
2. Select the desired setting and press the OK soft key to save
your selection.
Speed Dial lets you disable the speed dialing function, except for
the Voicemail hot key (
) which remains active. (For more
TTY Mode
Your phone is fully compatible with TTY equipment used by those
who are hearing impaired. TTY equipment is connected to your
phone through the headset connector on the top of the phone.
TTY Mode must be enabled before you can use your phone with a
TTY device.
1. From the Settings menu, select Call Settings
➔
Speed Dial.
• On — Enables the speed dial keys.
• Off — Disables the speed dial keys.
2. Select the desired setting and press the OK soft key to save
1. From the Settings menu, select Call Settings
➔
TTY Mode.
your selection.
You are prompted to confirm you want to change the
current TTY Mode setting.
Auto Retry
Auto Retry automatically re-dials a number if the connection fails.
Depending upon your location, the number of times your phone
automatically dials the number may vary.
Note: The “Enabling TTY may Impair Headset Use and Non-TTY Accessory
Performance.” message pops up when you select TTY Mode
.
1. From the Settings menu, select Call Settings
The following settings appear in the display:
• Off — Disables automatic re-dialing of numbers
➔
Auto Retry.
2. To access the TTY Mode settings, press the Yes soft key. To
return to the Call Settings sub-menu, press the No soft key.
3. If you press the Yes soft key, the following settings appear
• Every 10 Seconds — Phone automatically re-dials a number
every 10 seconds
in the display:
• TTY Full — Enables TTY mode and disables microphone and
earpiece.
• Every 30 Seconds — Phone automatically re-dials a number
every 30 seconds
• TTY+Talk (VCO) — Enables TTY mode and microphone.
• Every 60 Seconds — Phone automatically re-dials a number
every 60 seconds
• TTY+Hear (HCO) — Enables TTY mode and earpiece.
137
• TTY Off — Disables TTY mode.
• Data For Next Call — Wait for data call for the next 10 minutes.
4. Select the desired TTY Mode setting and press the OK soft
key to save your selection.
• Data Until Powered Off — Data calls only, no voice calls accepted,
until you power the phone off and on again.
2. Select the desired data call connection setting and press
Note: The TTY icon (
) appears in the top of the display when the phone is
the OK soft key to save your selection.
in standby mode.
Phone Settings
Airplane Mode
Voice Privacy
Voice Privacy when enabled (that is, set to Enhanced), turns on
When set to On, Airplane Mode disables all radio functions of your
phone. This prevents you from receiving or making calls (except
emergency calls), but allows you to use other features (such as
the camera and the Tools) safely in sensitive environments, such
as on board an aircraft.
advanced voice encryption.
1. From the Settings menu, select Call Settings
➔
Voice
Privacy. The following settings appear in the display:
• Standard — Voice privacy is disabled
• Enhanced — Voice privacy is enabled
1. From the Settings menu, select Phone Settings
➔
Airplane
Mode.The following settings appear in the display:
2. Select the desired Voice Privacy setting and press the OK
soft key to save your selection.
• On — Disables the radio transmitter and receiver in your phone
• Off — Enables the radio transmitter and receiver in your phone
2. Select the desired Airplane Mode setting and press the OK
soft key to save your selection.
Data Settings
Use the Data Settings menu to configure data connection
settings.
Language
1. From the Settings menu, select Call Settings
➔
Data
Settings. The following settings appear in the display:
The language option on your phone can change the language of
voice prompts, menus, and key-input.
• Data Off — No incoming data calls accepted.
Changing Your Settings
138
1. From the Settings menu, select Phone Settings
➔
Auto Keypad Lock
Language. The following settings appear in the display:
Auto Keypad Lock lets you set your phone to automatically lock
all keys (except the Power On/Off-LOCK key) when the Backlight
time expires.
• English
• Español
2. Select the desired Language setting and press the OK soft
key to save your selection.
Tip: If you set Backlight to Always On or Always Dim, Auto Keypad Lock is
disabled. You can manually lock the touch screen and all keys by
pressing the Power On/Off-LOCK key (
) at the top of the phone.
Vibration Feedback
1. From the Settings menu, select Phone Settings
Keypad Lock
2. Select On or Off
➔
Auto
When set to On, Vibration Feedback causes your phone to vibrate
as well as play a tone when you press a key, button, or field on
the phone to assure you that your screen press is recognized.
.
.
1. From the Settings menu, select Phone Settings
➔
Vibration
3. To save your new setting and return to the Phone Settings
Feedback.The following options appear in the display:
menu, press the OK soft key.
• Activation
Security
–
–
On — Enables vibration feedback.
Use the Security menu to lock your phone, set up emergency
numbers, set restrictions, as well as other security options.
Off — Disables vibration feedback.
• Vibration intensity — Push and slide left and right (
0
–
5).
Lock Phone
2. Select the desired Vibration Feedback settings and press
Locking the phone limits all outgoing calls except calls to 911
emergency and the three user-programmable emergency
numbers. You can lock the phone manually during use, or set the
phone to lock automatically when it is turned on. With the phone
in lock mode, you can answer incoming calls, but you must
the Save soft key to save your selection.
139
Change Lock Code
unlock the phone to place outgoing calls (except to emergency
and secret numbers).
The default lock code for your phone is generally the last four
digits of your phone number. It is advisable to change the default
lock code to a secret code for security purposes.
1. From the Settings menu, select Phone Settings
➔
Security.
You’re prompted to enter the lock code.
1. From the Settings menu, select Phone Settings
➔
Security.
Note: The default lock code is the last four digits of your telephone number.
You’re prompted to enter the lock code.
2. Select the lock code field, enter the lock code, and press
Note: The default lock code is the last four digits of your telephone number.
the OK soft key.
2. Select the lock code field, enter the lock code, and press
3. Select Lock Phone. The following phone Lock mode
the OK soft key.
settings appear in the display:
3. Select Change Lock Code. You’re prompted to enter the
• Lock — Locks the phone immediately (The phone stays locked
until you enter the lock code.)
new lock code.
• Unlock — Unlocks the phone.
4. Enter the new lock code and press the OK soft key. You’re
• On Power Up — The phone locks automatically the next time your
phone is powered ON (The phone stays locked until you enter the
lock code.)
prompted to re-enter the new lock code for verification.
5. Enter the new lock code again and press the OK soft key.
4. Select the desired phone Lock mode setting and press the
Your new Lock Code is stored.
OK soft key to save your selection.
Note: Your phone does not allow you to view the Lock Code for obvious
security reasons. If you change the Lock Code, be sure to write down
or memorize the new code.
Tip: You can manually lock your phone by pressing
Changing Your Settings
140
Emergency #
Note: The default lock code is the last four digits of your telephone number.
Your phone provides the option of storing three emergency
numbers. Each number can be up to 32 digits in length. All
emergency numbers can be manually called at any time, even
when your phone is locked or restricted. This can be a useful
feature for controlling outgoing calls from your phone.
2. Select the lock code field, enter the lock code, and press
the OK soft key.
3. Select Emergency #
.
4. Select from the three emergency number entries.
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.
5. Enter an emergency number (up to 32 digits in length),
then press the Done soft key to save the number that you
entered.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Call Emergency Numbers in Lock Mode
1. In standby mode, enter the emergency number.
2. Press
to place the call.
Reset Phone
Important!: DO NOT depend on this phone as a primary method of calling
Reset Phone returns all Settings to their factory default values.
911 or for any other essential or emergency communications.
1. From the Settings menu, select Phone Settings
➔
Security.
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
You’re prompted to enter the lock code.
Store Emergency Numbers
Note: The default lock code is the last four digits of your telephone number.
1. From the Settings menu, select Phone Settings
➔
Security.
2. Select the lock code field, enter the lock code, and press
You’re prompted to enter the lock code.
the OK soft key.
141
3. Select Reset Phone. You are prompted to confirm that you
want to restore default settings (except for the Contacts
and Voice Dial).
4. To erase all entries, press Yes. To keep the current entries
and return to the Security sub-menu, press No
.
Restrictions
4. To return to the Security sub-menu without resetting the
Restrictions lets you restrict the use of your phone for outgoing
calls, incoming calls, and calls placed from your Contacts.
phone, press No. To restore default settings, press Yes
.
1. From the Settings menu, select Phone Settings
➔
Security.
Erase All Contacts
You’re prompted to enter the lock code.
Erase memory erases your Contacts and Group information
(except Default). This feature is useful if you want to give your
phone to someone else.
Note: The default lock code is the last four digits of your telephone number.
1. From the Settings menu, select Phone Settings
➔
Security
.
2. Select the lock code field, enter the lock code, and press
You’re prompted to enter the lock code.
the OK soft key.
3. Select Restrictions. The following options appear in the
display:
Note: The default lock code is the last four digits of your telephone number.
2. Select the lock code field, enter the lock code, and press
• Outgoing Calls — Allows/blocks/or restricts your calls.
the OK soft key.
• Incoming Calls — When set to On, restricts the phone from
receiving calls.
3. Select Erase All Contacts. You are prompted to confirm
4. Select the desired Call Restriction. The following options
erasure of all Contacts entries.
appear in the display:
Note: This procedure does not delete your Photo Gallery. The Photo Gallery
• Allow All — Lets you make or receive calls with no restriction.
needs to be deleted separately.
• Allow None — Blocks you from making or receiving calls.
Changing Your Settings
142
• Allow Contacts — Blocks you from making calls to, or receiving
The following roaming options appear in the display:
calls from, any number not in your Contacts list.
• Home Only — Your phone is available for normal operation only
within your designated coverage area.
5. Select the preferred setting.
6. To save your new setting, press the OK soft key.
NAM Selection
• Automatic-A — Your Wireless Provider’s Preferred Roaming List
(PRL) of networks is used to acquire service. If no preferred systems
are found, any digital “A” system is acquired.
• Automatic-B — Your Wireless Provider’s PRL of networks is used
to acquire service. If no preferred systems are found, any digital “B”
system is acquired.
The Network menu allows you to select NAM (Number
Assignment Module) settings for your phone. You can store two
NAM settings, which are essentially telephone numbers, for your
phone.
2. Select the preferred roaming option, then press the OK soft
key.
1. From the Settings menu, select Phone Settings
➔
NAM
Selection. The following options appear in the display:
Set Time
• NAM1 — Your service contract has one phone line.
• NAM2 — Your service contract has two phone lines.
2. Select the desired NAM setting. The phone powers itself
off and back on.
Use the Set Time option to set the current date and time.
Note: In digital service mode, the Set Time feature is disabled. The network
adjusts time and date automatically.
With Airplane Mode set to On, this function is enabled. In digital service
System Select
The System Select menu allows you to select the roaming setting
for your phone.
1. From the Settings menu, select Phone Settings
➔
Set Time.
The following options appear in the display:
1. From the Settings menu, select Phone Settings
Select
➔
System
• Set Date
• Set Time
.
143
2. Select the desired option.
Calibration
•
For Set Date, the Set Date screen appears in the display.
Calibration lets you adjust the screen ability to correctly locate
your touch.
–
–
Use the up and down arrow buttons to select the current date.
Press the OK soft key to save your date setting.
1. From the Settings menu, select Phone Settings
➔
•
For Set Time, the Set Time screen appears in the display.
Calibration. The Calibration screen appears in the display.
–
–
Use the up and down arrow buttons to select the current time.
2. To begin calibration of the screen, press the OK soft key. A
Press the OK soft key to save your time setting.
series of five crosses appear in the screen.
Touch Sensitivity
3. To calibrate the screen, press the center of each cross in
Touch Sensitivity lets you adjust how much pressure you must
apply to the screen for the Delve to react.
turn.
1. From the Settings menu, select Phone Settings
➔
Touch
Important!: For this calibration process to succeed, it is recommended that
you use a stylus to accurately set the new touch points.
Sensitivity. The Touch Sensitivity screen appears in the
display.
PC Connection
2. Press, hold, and slide the Touch Sensitivity button left or
PC Connection lets you select how your Delve responds to being
connected to personal computer using an optional USB Data
Cable.
right to adjust the screen’s responsiveness to your touch (
1
–
5).
1. From the Settings menu, select Phone Settings
➔
PC
3. Test your setting by applying pressure to the Touch Here
Connection. The following PC Connection options appear in
button until it responds.
the display:
4. If desired, repeat steps 2 and 3 until the Touch Sensitivity
• USB Mass Storage — Allows you to manage files on an optional
microSD Memory Card in your Delve, just as you would files on a
flash drive.
setting is acceptable.
5. To save your new setting, press the Save soft key.
Changing Your Settings
144
• USBModem — Allows you to use your Delve as a wireless modem
Phone Memory Usage
for your PC.
Phone Memory Usage lets you review your usage of your phone’s
memory.
2. Select the desired setting, and press the OK soft key to
save it and return to the Phone Settings screen.
1. From the Settings menu, select Memory Manager
➔
Phone
Memory Manager
Memory Usage. The Phone Memory Usage screen appears
in the display showing the following information:
Memory Manager lets you quickly and easily review and manage
your phone memory usage. To access Memory Manager, do the
following:
• Total Used memory usage
• Available unused memory
• Images memory usage
ᮣ
From the Settings menu, select Memory Manager. The
following options appear in the display:
• Videos memory usage
• Phone Memory Usage — Lets you review your phone’s used and
• Ringtones memory usage
• Sounds memory usage
available memory.
• Card Memory Usage — Lets you review a removable Memory
Card’s used and available memory.
• Applications memory usage
• Pic/Video Msg memory usage
2. Press the OK soft key to return to the Memory Manager
menu.
• Save Options — Lets you specify whether your images and videos
will be stored in your phone or on an optional Memory Card.
• Phone Memory — Lets you review your phone’s available memory
and manage your files stored there.
Card Memory Usage
• Card Memory — Lets you review a removable Memory Card’s
available memory, manage your files stored there, and format new
Memory Cards.
Card Memory Usage lets you review your usage of your Memory
Card.
1. From the Settings menu, select Memory Manager
➔
Card
Memory Usage. The Card Memory Usage screen appears in
145
the display showing the following information:
3. Select the preferred storage location for the desired file
type, then press the Save soft key. You are returned to the
Memory Manager menu.
• Total memory usage
• Available unused memory
• Images memory usage
Phone Memory
• Videos memory usage
Phone Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up
memory on your phone for reuse.
• Music memory usage
2. Press the OK soft key to return to the Memory Manager
menu.
1. From the Settings menu, select Memory Manager
➔
Phone
Memory. The Phone screen appears in the display listing
Save Options
files in the Images folder.
Lets you specify where you want your images and videos stored.
To access Save Options, do the following:
2. To select another folder, press the down arrow button. The
1. From the Settings menu, select Memory Manager
Options
➔
Save
following options drop down:
.
• Images
• Videos
The following file type options appear in the display:
• Ringtones
• Images
• Videos
• Sounds
3. Select the desired option. A list of all files in the related
folder appears in the display. Files are listed by name.
2. The following storage options appear in the display for
each file type:
4. To erase files, do the following:
• Phone — Saves the selected type of files in your phone’s memory.
• Card — Saves the selected type of files in a removable microSD
memory card.
•
Press the Erase soft key. The Select to erase screen appears in
the display.
Changing Your Settings
146
•
•
Select the check box for a file you want to erase to mark the file for
erasure. (Press the Select All check box to mark all files for
erasure.)
• Videos
• Music
3. Select the desired option. A list of all files in the related
folder appears in the display.
Press the Erase soft key.
5. To move files to the Memory Card, do the following:
Files are listed by name, and each file entry shows the
name of each file.
•
Press the Move soft key. The Select to move screen appears in the
display.
•
Select the check box for a file you want to move to mark the file for
removal to the Memory Card. (Press the Select All check box to
mark all files for removal.)
4. To erase files, do the following:
•
Press the Erase soft key. The Select to erase screen appears in
the display.
•
Press the Move soft key.
•
Select the check box for a file you want to erase to mark the file for
erasure. (Press the Select All check box to mark all files for
erasure.)
6. Press
to return to the Memory Manager menu.
Card Memory
•
Press the Erase soft key.
Card Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up
space on your Memory Card for reuse.
5. To move files to Phone Memory, do the following:
•
Press the Move soft key. The Select to move screen appears in the
display.
1. From the Settings menu, select Memory Manager
➔
Card
•
Select the check box for a file you want to move to mark the file for
removal to Phone Memory. (Press the Select All check box to mark
all files for removal.)
Memory. The Card screen appears in the display listing files
in the Images folder.
2. Press the down arrow button. The following options drop
•
Press the Move soft key.
down:
6. Press
to return to the Memory Manager menu.
• Images
147
Formatting a Memory Card
Formatting a microSD Memory Card erases any data currently on
the card and creates multimedia directories compatible with your
phone. To format a Memory Card, do the following:
1. From the Settings menu, select Memory Manager
➔
Card
Memory. The Card screen appears in the display.
2. Press the Format soft key. You are prompted to confirm
formatting of the Memory Card.
3. To format the Memory Card, press Yes. To return to the
Card screen without formatting the Memory Card, press
No.
Changing Your Settings
148
Section 19: Phone Info
This section explains Phone Info options that let you identify the
hardware and software versions of your phone and let you
identify the phone number assigned to your phone.
Version
You can view both the software and hardware version of your
phone using this feature. This feature is helpful if you need to
contact Customer Service.
Phone Number
This option causes the Phone Number screen to appear in the
display and show the ten-digit number assigned to your phone by
your Wireless Provider.
1. In standby mode, press the Menu soft key, then select
Phone Info
➔
Version.
Your phone’s hardware and software version information
appears in the display.
1. In standby mode, press the Menu soft key, then select
Phone Info
➔
Phone Number. The phone number assigned
2. To return to the Phone Info menu, press
.
by your Wireless Provider appears in the display.
2. To return to the Phone Info menu, press
.
Icon Glossary
This option causes the Icon Glossary list to appear in the display
and show the icons that can appear in the display and the names
of the icons.
1. In standby mode, press the Menu soft key, then select
Phone Info
➔
Icon Glossary. A list shows of the icons that
can appear on the top line of the display.
2. To return to the Phone Info menu, press
.
149
Section 20: Health and Safety Information
Thissectionoutlinesthesafetyprecautionsassociatedwithusing
yourphone.Thesesafetyprecautionsshouldbefollowedtosafely
use your phone.
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
For body worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
Health and Safety Information
150
contains no metal and that positions the handset a minimum of
1.5 cm from the body.
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
information.
•
CDMA:
UL Certified Travel Adapter
–
Head: 1.04 W/Kg.
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
–
Body-worn: 0.656 W/Kg.
•
PCS:
–
Head: 0.803 W/Kg.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
–
Body-worn: 0.716 W/Kg.
SAR information on this and other model phones can be viewed
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
151
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
What is FDA's role concerning the safety of wireless
phones?
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
Under the law, FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
Health and Safety Information
152
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
•
•
•
Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
•
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
153
cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don't know with certainty what the results of such
studies mean for human health.
provide data that is directly applicable to human populations, but
ten or more years' follow-up may be needed to provide answers
about some health effects, such as cancer.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do -
may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF).
However, none of the studies can answer questions about long-
term exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The Project has also helped develop a series of
public information documents on EMF issues.
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies can
Health and Safety Information
154
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
away from your body or use a wireless phone connected to a remote
antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000.
•
If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to
limit wireless phone use by children was strictly precautionary; it
155
was not based on scientific evidence that any health hazard
exists.
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that hands-
free kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
Health and Safety Information
156
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
•
•
•
International Commission on Non-Ionizing Radiation Protection:
National Radiation Protection Board (UK):
US Food and Drug Administration:
Road Safety
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/1/2006):
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
•
•
•
•
•
FCC RF Safety Program:
1. Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
Environmental Protection Agency (EPA):
Occupational Safety and Health Administration's (OSHA):
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
National Institute for Occupational Safety and Health (NIOSH):
World Health Organization (WHO):
157
3. Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes
from the road. If you get an incoming call at an
7. Do not engage in stressful or emotional conversations that
may be distracting. Make people you are talking with
aware you are driving and suspend conversations that
have the potential to divert your attention from the road.
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving;
if necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice and even heavy
traffic can be hazardous.
8. Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
or medical emergencies.
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1 or
other local emergency number, as you would want others
to do for you.
5. Do not take notes or look up phone numbers while driving.
Jotting down a "to do" list or flipping through your address
book takes attention away from your primary
responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try
to plan calls when your car will be stationary. If you need to
make a call while moving, dial only a few numbers, check
the road and your mirrors, then continue.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see a
broken-down vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
number.
Health and Safety Information
158
"The wireless industry reminds you to use your phone safely when
driving."
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
For more information, please call 1-888-901-SAFE, or visit our
web-site www.ctia.org
.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
You should follow some commonsense recommendations when
using any portable audio device:
Provided by the Cellular Telecommunications & Internet
Association.
•
Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
Responsible Listening
Caution!: Avoid potential hearing loss.
•
When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cellular telephones, at high volume settings for long durations
may lead to permanent noise-induced hearing loss. This includes
the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound
has also been associated in some studies with tinnitus (a ringing
in the ear), hypersensitivity to sound and distorted hearing.
•
•
Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, you
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
159
•
•
Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
Bethesda, MD 20892-2320
Voice: (301) 496-7243
Email: [email protected]
You can obtain additional information on this subject from the
following sources:
National Institute for Occupational Safety and Health
Hubert H. Humphrey Bldg.
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
200 Independence Ave., SW
Washington, DC 20201
Voice: (800) 222-2336
Voice: 1-800-35-NIOSH (1-800-356-4647)
Email: [email protected]
Internet: http://www.audiology.org
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger.
When connecting the phone or any accessory to another device,
read its user's guide for detailed safety instructions. Do not
connect incompatible products.
Health and Safety Information
160
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
•
•
Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place;
Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless phone with such a device, consult your health care
provider.
UsingYourPhoneNearOtherElectronicDevices
For more information see:
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
Persons who have such devices:
•
Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
Should not carry the phone in a breast pocket;
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are
more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
•
•
Should use the ear opposite the implantable medical device to
minimize the potential for interference;
161
The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users find phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the rating on their
box or a label located on the box.
is considered acceptable for normal use. A sum of 6 is
considered for best use.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
T3
+
T2
=
5
M3
+
M2
=
5
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with "normal usage" while
using their hearing aid with the particular wireless phone.
"Normal usage" in this context is defined as a signal quality that
is acceptable for normal operation.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than
phones that are not labeled. T4 is the better/higher of the two
ratings.
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together. A sum of 5
Health and Safety Information
162
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
Vehicles
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Emergency Calls
Switch your phone off in any facility where posted notices require
you to do so.
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
163
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
FCC Notice and Cautions
FCC Notice
To make an emergency call:
1. If the phone is not on, switch it on.
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
3. Press the
key.
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
Cautions
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
phone warranty if said accessories cause damage or a defect to
the phone.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
Health and Safety Information
164
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
Other Important Safety Information
•
Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
•
•
•
Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
If you're inside a building, being near a window may give you
better reception.
Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
Understanding the Power Save Feature
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
•
•
Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
Understanding How Your Phone Operates
Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
165
Maintaining Your Phone's Peak Performance
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
Battery Standby and Talk Time
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
•
To ensure that the Hearing Aid Compatibility rating for your phone is
maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call. For more information,
Battery Precautions
•
If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
•
Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
•
•
•
Do not hold, bend or twist the phone's antenna, if applicable.
Do not use the phone if the antenna is damaged.
If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
•
•
Never use any charger or battery that is damaged in any way.
Do not modify or remanufacture the battery as this could result in
serious safety hazards.
•
•
Speak directly into the phone's receiver.
Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
•
If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
•
Follow battery usage, storage and charging guidelines found in the
user’s guide.
Health and Safety Information
166
•
Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below
0 °C (32 °F).
•
•
If left unused, a fully charged battery will discharge itself over time.
•
•
Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
•
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
•
Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
•
•
•
Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
•
Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
•
•
Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
167
•
•
•
Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
•
•
•
•
•
Keep the phone and all its parts and accessories out of the reach of
small children.
Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
•
If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
•
Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
•
•
Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
Health and Safety Information
168
Section 21: Warranty Information
Standard Limited Warranty
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
Phone
1 Year
Batteries
1 Year
Leather Case
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
169
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-987-
4357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
•
•
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
•
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
Warranty Information
170
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
171
Precautions for Transfer and Disposal
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
©2008 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein St.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Warranty Information
172
Index
Settings 116
C
Camcorder
A
Alltel Shop
Options 88
Camera
Calculator 123
Calendar 116
Call Functions
Options 82
Settings 71
Camera Options
Alltel Web
Making a Call — Contact
Dialing 21
Making a Call — Number Entry
Dialing 20
Making a Call — Speed
Dialing 22
Making a Call — Voice
Dialing 23
Axcess Web
B
Battery
Card Memory
Call Settings
Charging 4
Removal 6
Formatting 148
Management 147
Contacts List
Bluetooth
173
Open 36
Converters 125
Creating and Sending New Messages
D
F
L
Favorites
Language 138
G
Getting Started
UnderstandingthisUserManual
M
Making a Call
Display Settings
Backlight 132
Banner 132
Wallpaper 131
Melody Shuffle
Memory Card
Formatting 148
E
Voicemail 7
easyedgeSM
H
Help 71
E-Mail
Installing 8
Removing 8
Menu Navigation
HAC 161
I
Launching 70
Message Folders
Image Shuffle
Inbox 65
Outbox 66
Wallpaper 131
K
Voicemail 67
174
Messaging
microSD
Features 9
Modes 15
Q
R
Roaming 31
Formatting 148
Installing 8
Removing 8
Phone Info
Version 149
Mode
Camcorder 18
Camera 18
M-Ratings 162
Multimedia 102
N
P
Personal Organizer
Phone
Phone Memory
S
Phone Settings
Security Settings
Restriction 142
Language 138
Photos
Sending 96
Settings
Picture Messages
Display 130
175
Phone 138
Security 139
Sound 133
Changing 52
Text Modes
U
Understanding Your Contacts
Editing an Existing Contact
Entry 42
Setup
Location 129
Voicemail 64
Sound Settings
Alerts 135
Speed Dial
Changing 52
Tools
Memory 48
Pauses 42
Bluetooth 113
Calculator 123
Calendar 116
V
Assigning 44
Changing 45
Removing 46
Converter 125
Tools Menu
Accessing 109
T-Ratings 162
TV on Demand
Version 149
Voice Service
T
Commands 109
Settings 110
Voicemail
Checking 65
176
|