DLP TV
SP42L6HX
SP46L6HX
SP50L6HX
SP56L6HX
SP61L6HX
SP67L6HX
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
Picture In Picture (PIP)
Color Weakness Enhancement Mode
My Color Control
SRS TruSurroundXT
Digital Natural Image engine
This device is a Class B digital apparatus.
Contents
◆ CONNECTING AND PREPARING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
■
Control Panel of Your Television...................................................................
Connection Panel of Your Television ............................................................
Connecting to an Aerial or Cable Television Network ...................................
Connecting a Satellite Receiver or Decoder..................................................
Infrared Remote Control................................................................................
Inserting the Batteries in the Remote Control................................................
Switching Your Television On and Off...........................................................
Placing Your Television in Standby Mode.....................................................
Becoming Familiar with the Remote Control .................................................
Plug & Play Feature.......................................................................................
Choosing Your Language..............................................................................
5
6
8
8
9
10
11
11
12
13
14
◆ USING YOUR TELEVISION
Storing Channels Automatically.....................................................................
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
15
16
18
19
20
21
22
23
23
24
24
25
26
27
28
28
29
30
Storing Channels Manually............................................................................
Skipping Unwanted Channels .......................................................................
Sorting the Stored Channels .........................................................................
Activating the Child Lock ...............................................................................
Assigning Names to Channels ......................................................................
Fine Tuning Channel Reception....................................................................
Using the LNA (Low Noise Amplifier) Feature...............................................
Viewing the Channel Scan Picture ................................................................
Displaying Information...................................................................................
Freezing the Current Picture .........................................................................
Changing the Picture Standard .....................................................................
Adjusting the Picture Settings........................................................................
Selecting the Picture Size..............................................................................
Using the Digital NR (Noise Reduction) Feature...........................................
DNIeTM (Digital Natural Image engine)
...............................................
Setting the My Color Control (Easy Control) .................................................
Setting the My Color Control (Detail Control) ................................................
Symbols
☛
➢
Press
Important
Note
English - 3
Contents(continued)
◆ USING YOUR TELEVISION (continued)
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Setting the Film Mode....................................................................................
Viewing the Picture In Picture (PIP) ..............................................................
Changing the Sound Standard ......................................................................
Adjusting the Sound Settings ........................................................................
Setting the SRS TSXT...................................................................................
Adjusting the Volume Automatically ..............................................................
Enjoying the Sound of External Speakers.....................................................
Selecting the Sound Mode (depending on the model) ..................................
Setting and Displaying the Current Time.......................................................
Setting the Sleep Timer.................................................................................
Switching the Television On and Off Automatically.......................................
Setting the Blue Screen.................................................................................
Setting the Melody Sound .............................................................................
Using the Color Weakness Enhancement Feature .......................................
Setting the Picture in PC Mode .....................................................................
Viewing an External Signal Source ...............................................................
Assigning Names to External Sources ..........................................................
31
32
34
35
35
36
37
38
39
40
41
42
42
43
44
45
46
◆ USING THE TELETEXT FEATURE
■
■
■
■
Teletext Feature ............................................................................................
47
48
48
49
Displaying the Teletext Information ...............................................................
Selecting Display Options..............................................................................
Selecting a Teletext Page..............................................................................
◆ ADDITIONAL INFORMATION AND CONNECTIONS
■
■
■
■
■
■
■
Connecting to the External Input/Output .......................................................
Connecting to the S-Video Input....................................................................
Connecting to the Digital Input ......................................................................
Connecting to the Component Input..............................................................
Connecting to the PC Input ...........................................................................
Setting up Your PC Software (Windows only)...............................................
PC/HDMI(DVI) Input Mode............................................................................
50
51
52
53
53
54
55
◆ RECOMMENDATIONS FOR USE
■
■
■
■
■
Setting Up Your Remote Control...................................................................
56
57
59
60
61
Programming the Remote Control for Other Components ............................
Replacing the Lamp.......................................................................................
Troubleshooting: Before Contacting Service Personnel................................
Technical Specifications................................................................................
English - 4
Control Panel of Your Television
The actual configuration on your TV may be different, depending on
your model.
➢
Switch among video input modes
Display the on-screen menu
Adjust the volume
Select the channels
LED Indicators
Access to the selected option on
the menu system
Picture On/Off
Switch the TV On and Off
Remote Control Sensor
(
:On,
:Blinking,
:Off)
TIMER
LAMP
STAND BY/TEMP
Indication
Standby mode.
A timer pilot lights when Timer Auto On or Off is selected.
Normal operation.
Normal operation (when Timer Auto On or Off is selected).
Lamp is warming up. The normal picture comes on after 25 seconds.
The normal picture comes on after 25 seconds. (when Timer Auto On or
Off is selected)
Air vent cover in the rear of the TV is not properly installed.
Inside temperature of the TV is over normal. Clean the air vent cover in the
rear of the TV. Turn the TV back on after 1 hour.
The lamp does not work, please contact an authorized Service Center for
assistance.
◆
You can use the channel selection buttons to switch on the TV when it is in standby mode
depending on the model.
➢
◆
◆
When using the on-screen menu the volume adjustment and channel selection buttons have
the same function as the …/†/œ/√ buttons on the remote control.
If the remote control no longer works or your have lost it, you can use controls on the panel
of the TV.
English - 5
Connection Panel of Your Television
The actual configuration on your TV may be different, depending on
your model.
➢
Video Input Audio Input S-Video Input
English - 6
Connection Panel of Your Television(continued)
The actual configuration on your TV may be different, depending on
your model.
➢
Rear of the TV
ΠANT IN
Ø PC Input
Connect to the PC audio/video outputs.
Coaxial connector for aerial or cable
network.
∏ DVI Audio Input
´ S-Video Input
Connect to the audio output jacks for device
with DVI output.
Connect to S-Video output jacks of an
S-VHS VCR or DVD player.
” HDMI/DVI Input
ˇ Audio/Video Input
Connect to the digital device with HDMI or
DVI output.
Connect to the audio/video output jacks of
VCRs, DVD players and similar devices.
’ SERVICE Jack
¨ Audio/Video Output
It is for repairs and software upgrades.
Connect to the audio/video input jacks of a
recording VCR.
˝ SCART Input/Output
Inputs or outputs for external devices, such
as VCR, DVD, video game device or video
disc players.
ˆ COMPONENT Input
Connect to the audio and video outputs of
DVD or DTV Set-Top Box.
480i/480p/576i/576p/720p/1080i Y, PB and
PR video signal outputs are available.
English - 7
Connecting to an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
1
2
In the first three cases, connect the aerial or network input cable to
the ANT IN jack on the rear of the television.
Rear of the TV
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
or
For further details, refer to:
◆
◆
“Storing Channels Automatically” on page 15.
“Storing Channels Manually” on page 16.
Cable Television
Network
Connecting a Satellite Receiver or Decoder
In order to watch television programmes broadcast via
a satellite network, you must connect a satellite receiver
to the rear of TV. Also, in order to descramble a coded
transmission signal, you must connect a decoder
to the rear of TV.
Rear of the TV
◆
◆
Using a RCA cable
Connect the receiver (or decoder) RCA cable to one of the
RCA connectors on the rear of the television.
Using a coaxial cable
Connect a coaxial cable to the:
-
-
Receiver (or Decoder) output socket.
Television aerial input socket.
➢
If you wish to connect both a satellite receiver (or decoder)
and a VCR, you should connect the:
◆
Receiver (or Decoder) to the VCR
VCR to the television
Satellite Receiver/
Decoder
◆
Otherwise, connect the receiver (or decoder) directly to
the television.
English - 8
Infrared Remote Control
The performance of the remote control may be affected by bright light.
➢
POWER ON/OFF
WHEN YOU PRESS A BUTTON , ‘
’
APPEARS ALONG WITH SELECTED MODE
(TV, VCR, CATV, DVD OR STB) AND
REMAINING BATTERIES ON LCD
PICTURE EFFECT SELECTION
PICTURE SIZE
MAKE THE REMOTE CONTROL WORKS
FOR TV, VCR, CABLE-BOX (CATV),
DVD PLAYER, OR SET-TOP BOX (STB)
DIRECT CHANNEL SELECTION
SWITCH REPEATEDLY BETWEEN THE
LAST TWO CHANNELS DISPLAYED
ONE OR TWO-DIGIT CHANNEL
SELECTION
NEXT CHANNEL/
TELETEXT NEXT PAGE
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
EXTERNAL INPUT SELECTION/
TELETEXT HOLD
PREVIOUS CHANNEL/
TELETEXT PREVIOUS PAGE
TUNER/CABLE NETWORK
SELECTION
DISPLAY INFORMATION/
TELETEXT REVEAL
EXIT FROM ANY DISPLAY
MENU DISPLAY/
TELETEXT INDEX
MOVE TO THE REQUIRED MENU
OPTION/
CONFIRM YOUR CHOICE
(STORE OR ENTER)
ADJUST AN OPTION VALUE
RESPECTIVELY
SOUND EFFECT SELECTION
STILL THE MAIN PICTURE
SOUND MODE SELECTION
SRS TruSurround XT MODE SELECTION
In the PIP mode, the main and
➢
sub pictures are stilled
at the same time.
FASTEXT TOPIC SELECTION
CURRENT TIME DISPLAY/
TELETEXT SUBPAGE
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
PIP FUNCTIONS;
- PIP ACTIVATING OR DEACTIVATING
(PIP ON)
- SWAPPING THE MAIN AND THE SUB
PICTURE (SWAP)
AUTOMATIC SWITCH-OFF/
TELETEXT CANCEL
DNIe ON/DEMO/OFF/
TELETEXT SIZE SELECTION
- SELECTING THE CHANNEL OF SUB
PICTURE (P / )
∨
^
SET THE MBR CODE OF REMOTE
CONTROL FOR THE PRODUCTS
EXCEPT SAMSUNG PRODUCT
(OPTION)
VCR/DVD FUNCTIONS;
- REWIND (REW)
- STOP
- PLAY/PAUSE
- FAST FORWARD (FF)
IF YOUR REMOTE CONTROL IS
NOT FUNCTIONING PROPERLY,
TAKE OUT THE BATTERIES AND
PRESS THE RESET BUTTON FOR
ABOUT 2~3 SECONDS. RE-
INSERT THE BATTERIES AND
TRY USING THE REMOTE
CONTROL AGAIN.
English - 9
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
1
2
Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆
◆
-
+
on the battery against
on the battery against
-
on the remote control
+ on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
Do not mix battery types, i.e. alkaline and manganese.
English - 10
Switching Your Television On and Off
The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
➢
2
3
Press the power switch on the side of the television toward “ON”
(I).
Press the POWER ( ) button on the remote control (or the “
”
button on the front of the television).
Result:
The programme that you were watching last is re-
selected automatically.
TV
If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on page
15 or “Storing Channels Manually” on page 16.
➢
4
To switch your television off, press the power switch toward “OFF”
(O).
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce
the power consumption.
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
TV
1
Press the POWER ( ) button on the remote control to turn the
screen off.
Result:
The STAND BY/TEMP indicator on the front of the
television lights.
2
To turn the screen back on, simply press the POWER ( ) button
again.
You can also switch on by pressing the P
button.
/
, TV or numeric
➢
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the power
switch on the back of the set. It is best to unplug the set
from the mains and aerial.
☛
English - 11
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Display the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button
Viewing Function
Menu Function
Used to display the next
stored channel.
-
Used to display the
previous stored channel.
-
to
Used to display the corresponding channels.
For double digit channels, the second digit must be
pushed immediately after the first. Failure to do this will
result in a single digit channel being displayed.
➢
-/--
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
Used to switch repeatedly between the last two channels
displayed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the numeric buttons to select
second channel. Then, use the PRE-CH button to quickly
alternate between them.
Used to increase the
volume.
-
-
Used to decrease the
volume.
Used to switch the sound off temporarily.
To turn the sound back on, press this button again, or
➢
press the
or
button.
Used to display the
on-screen menu system.
Used to return to the previous
menu or normal viewing.
-
Used to:
◆ Display a submenu
containing selections for
the current menu option
◆ Increase/decrease a
menu option value
-
-
Used to confirm your choice.
Used to exit from the menu
system and return to normal
viewing directly.
English - 12
Plug & Play Feature
When the television is initially powered ON, several basic customer
settings proceed automatically and subsequently. The following
settings are available.
Plug & Play
Start Plug & Play
Start
Enter
Return
1
2
If the television is in Standby mode, press the POWER (
) button
on the remote control.
Plug & Play
To start the Plug & Play, select the Startand press the ENTER
button.
Language
English
Result:
The available languages are listed.
Türkçe
Français
3
4
5
6
Select the appropriate language by pressing the … or † button.
Press the ENTER button to confirm your choice.
Move
Enter
Skip
Result:
The message Check antenna input is displayed.
Make sure that the antenna is connected to the TV, and then
press the ENTER button.
Plug & Play
Check antenna input.
OK
Result:
The available areas are listed.
Select the appropriate area by pressing the … or † button.
Press the ENTER button to confirm your choice.
Enter
Skip
Result:
The Auto Store menu is displayed.
Plug & Play
Press the ENTER button to start the search
Result: The search will end automatically. Channels are sorted
Area
Asia/W.Europe
CIS/E.Europe
China
Hongkong/UK
Australia
NZ/Indonesia
South Africa
America
and stored in an order which reflects their position in
the frequency range (with lowest first and highest last).
➢
To stop the search before it has finished or return to normal
viewing, press the EXIT or ENTER button.
Move
Enter
Skip
7
8
When the channels have been stored, the Clock Set menu is
displayed. Press the ENTER button to set the current time.
Press the œ or √ button to move to the hour or minute.
Set these by pressing the ▲ or ▼ button.
Plug & Play
Auto Store
Press the ENTER button to confirm your choice.
Start
Enter
When it has finished, the message Enjoy your watchingis
displayed, and then the channel which has been stored will be
activated.
Skip
Plug & Play
Auto Store
175 MHz
18%
Stop
Enter
Skip
Plug & Play
: - - : - - am
Clock Set
Enter
Skip
Enjoy your watching.
OK
English - 13
Plug & Play Feature(continued)
If you want to reset this feature...
1
2
3
Press the MENU button.
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Result:
The options available in the Setupgroup are displayed.
Press the ENTER button.
Result:
The Plug & Playis selected.
4
5
Press the ENTER button again.
Setup
TV
Plug & Play
Language
Time
Blue Screen
Melody
√
√
√
√
√
√
√
To start the Plug & Play, select the Startand press the ENTER
button.
: English
: Off
: On
6
For further details on how to set, refer to the previous page.
Color Weakness: Off
PC
Move
Enter
Return
Choosing Your Language
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
Setup
TV
Plug & Play
Language
Time
Blue Screen
Melody
√
√
√
√
√
√
√
: English
1
2
Press the MENU button.
: Off
: On
Result:
The main menu is displayed.
Color Weakness: Off
PC
Press the ▲ or ▼ button to select Setup.
Move
Enter
Return
Result:
The options available in the Setupgroup are displayed.
3
4
Press the ENTER button.
Setup
TV
Plug & Play
Language
Time
Blue Screen
Melody
Press the ▲ or ▼ button to select Language.
Press the ENTER button.
English
:
Türkçe
:
Français
Result:
The available languages are listed.
: Off
Color Weakness: Off
PC
5
6
Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice.
Move
Enter
Return
English - 14
Storing Channels Automatically
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
TV
TV
TV
Channel
Auto Store
Manual Store
Add/Delete
Sort
Child Lock
Name
√
√
√
√
√
√
√
1
2
Press the MENU button.
Fine Tune
† More
Result:
The main menu is displayed.
Move
Enter
Return
Press the ▲ or ▼ button to select Channel.
Result:
The options available in the Channelgroup are
displayed.
Auto Store
Area
Search
:
Asia/W.Europe
CIS/E.Europe
China
Hongkong/UK
Australia
NZ/Indonesia
South Africa
America
3
4
5
Press the ENTER button.
Result:
The Auto Storeis selected.
Press the ENTER button again.
Result:
The Areais selected.
Move
Enter
Return
Press the ENTER button once again.
Result: The available areas are listed.
Auto Store
Area
: Asia/W.Europe √
Search
√
6
7
8
Select the appropriate area by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice
Press the ▲ or ▼ button to select Search.
Press the ENTER button.
To start the search, select the Startand press the ENTER
button.
Move
Enter
Return
Result:
The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range (with lowest first and highest last).
The programme originally selected is then displayed.
Search
Press ENTER to start.
Start
Enter
➢
To stop the search before it has finished or return to normal
viewing, press the EXIT or ENTER button.
Return
9
When searching and storing are complete, the Sortmenu is
Search
displayed.
Auto Store in progress.
◆
To sort the stored channels into the desired numerical order,
go to Step 5 of the “Sorting the Stored Channels” procedure
on page 19.
175 MHz
18%
Stop
Enter
◆
To exit from the channel store function without sorting the
channels, press the MENU button repeatedly until the menus
disappear.
Return
Sort
TV
10 When the channels have been stored, you can:
◆
◆
◆
◆
◆
Sort them in the order required (see page 19)
Clear a channel (see page 18)
Prog. Ch.
-----
-----
-----
-----
-----
1
2
3
4
5
*
*
*
*
*
Assign a name to the stored channels (see page 21)
Fine-tune channel reception if necessary (see page 22)
Activate/deactivate the LNA(Low Noise Amplifier) feature
(see page 23)
◆
Activate/deactivate the Digital NR(Noise Reduction)
feature (see page 28)
Move
Enter
Return
English - 15
Storing Channels Manually
You can store the television channels, including those received via
cable networks.
Channel
TV
Auto Store
Manual Store
Add/Delete
Sort
Child Lock
Name
√
√
√
√
√
√
√
When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found
◆ The programme number of each stored channel which
you wish to identify
Fine Tune
† More
Move
Enter
Return
1
2
Press the MENU button.
Result:
The main menu is displayed.
Manual Store
Color System Sound System
Press the ▲ or ▼ button to select Channel.
Prog.
1
AUTO
Search
887MHz
BG
Store
?
Result:
The options available in the Channelgroup are
displayed.
Channel
--
C
3
4
Press the ENTER button.
œ √ Move
Adjust
Return
Press the ▲ or ▼ button to select Manual Store.
Press the ENTER button.
Manual Store
Result:
The option available in the Manual Storegroup are
displayed with Prog. is selected.
Prog.
Color System Sound System
1
AUTO
Search
887MHz
BG
Store
?
Channel
5
6
To assign a programme number to a channel, find the correct
number by pressing the … or † button.
--
C
œ √ Move
Adjust
Return
If necessary, select the broadcasting standard required. Press the
œ or √ button to select Color Systemand press the … or †
button. The color standards are displayed in the following order.
(depending on the model).
Manual Store
◆ AUTO
-
-
PAL
-
SECAM
Prog.
Color System Sound System
1
AUTO
Search
887MHz
BG
Store
?
◆ AUTO
NTSC3.58
-
NTSC4.43
-
PAL60
Channel
--
C
7
Press the œ or √ button to select Sound Systemand press the …
or † button. The sound standards are displayed in the following
order. (depending on the model).
œ √ Move
Adjust
Return
BG
-
DK
-
I
-
M
English - 16
Storing Channels Manually (continued)
Manual Store
8
If you know the number of the channel to be stored, see the
following steps.
Prog.
1
Color System Sound System
AUTO
Search
887MHz
BG
Store
?
◆
◆
Press the œ or √ button to select Channel.
Channel
Press the ▲ or ▼ button to select C(Air channel) or S(Cable
--
C
channel).
œ √ Move
Adjust
Return
◆
◆
Press the √ button.
Press the numeric buttons (0~9), … or † button to select
indicate the required number.
Manual Store
Prog.
Color System Sound System
➢
If there is no sound or abnormal sound, reselect the sound
standard required.
1
AUTO
Search
887MHz
BG
Store
?
Channel
--
C
9
If you do not know the channel numbers, select the Searchby
pressing the œ or √ button. Press the … or † button to start the
search.
œ √ Move
Adjust
Return
Result:
The tuner scans the frequency range until the first
channel or the channel that you selected is received
on your screen.
Manual Store
Prog.
Color System Sound System
10 To store the channel and associated programme number, select
the Storeby pressing the œ or √ button. Press the ENTER
button.
1
AUTO
Search
887MHz
BG
Store
?
Channel
C
02
Result:
The OK is displayed.
œ √ Move
Adjust
Return
11 Repeat Steps 8 to 10 for each channel to be stored.
Manual Store
Prog.
Color System Sound System
Channel mode
☛
1
AUTO
Search
887MHz
BG
Store
OK
Channel
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been assigned to
position numbers from P00 to P99. You can select a channel
by entering the position number in this mode.
C
02
œ √ Move
Enter
Return
◆ C (Real channel mode): You can select a channel by
entering the assigned number to each air broadcasting station
in this mode.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel in this
mode.
English - 17
Skipping Unwanted Channels
You can exclude the channels of your choice from the channel scan
operation. When you scan through the stored channels, those that
you have chosen to skip are thus not displayed. All channels that
you do not specifically choose to skip are displayed during
scanning.
Channel
TV
TV
TV
Auto Store
Manual Store
Add/Delete
Sort
Child Lock
Name
√
√
√
√
√
√
√
1
2
Press the MENU button.
Fine Tune
† More
Result:
The main menu is displayed.
Move
Enter
Return
Press the ▲ or ▼ button to select Channel.
Result:
The options available in the Channelgroup are
displayed.
Add/Delete
Prog. Ch.
3
4
Press the ENTER button.
-----
-----
-----
-----
-----
1
2
3
4
5
Deleted
Deleted
Deleted
Deleted
Deleted
*
*
*
*
*
Press the ▲ or ▼ button to select Add/Delete.
Press the ENTER button.
Result:
The Add/Deletemenu is displayed with the current
channel automatically is selected.
Move
Enter
Return
5
6
7
Press the ▲ or ▼ button to select the channel to be added or
deleted. Press the ENTER button.
Add/Delete
Prog. Ch.
To add or delete the channel, select Addedor Deletedby
pressing the ▲ or ▼ button.
-----
-----
-----
-----
-----
1
2
3
4
5
Deleted
Deleted
Added
Deleted
Deleted
*
*
*
*
*
Press the ENTER button to confirm.
Adjust
Enter
Return
English - 18
Sorting the Stored Channels
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using the
auto store. You can delete those channels you do not want to keep.
Channel
TV
TV
TV
Auto Store
Manual Store
Add/Delete
Sort
Child Lock
Name
√
√
√
√
√
√
√
1
2
Press the MENU button.
Result:
The main menu is displayed.
Fine Tune
† More
Press the ▲ or ▼ button to select Channel.
Move
Enter
Sort
Return
Result:
The options available in the Channelgroup are
displayed.
3
4
Press the ENTER button.
Prog. Ch.
Press the ▲ or ▼ button to select Sort. Press the ENTER button.
-----
-----
-----
-----
-----
1
2
3
4
5
*
*
*
*
*
Result:
The Sortmenu is displayed.
5
6
Select the channel that you wish to move by pressing the ▲ or ▼
button. Press the ENTER button.
Move
Enter
Sort
Return
Select the number of the programme to which the channel is to be
moved by pressing the ▲ or ▼ button. Press the ENTER button.
Result:
The channel is moved to its new position and all other
channels are shifted accordingly.
Prog. Ch.
-----
-----
-----
-----
-----
-----
1
2
3
4
5
*
*
7
Repeat Steps 5 to 6 until you have moved all the channels to the
required programme numbers.
*
*
*
*
Move
Enter
Return
English - 19
Activating the Child Lock
This feature allows you to prevent unauthorized users, such as
children, from watching unsuitable programmes by muting out
video and audio. Child Lock cannot be released using front panel
buttons. Only remote control can release the Child Lock setting, so
keep the remote control away from children.
Channel
TV
TV
TV
Auto Store
Manual Store
Add/Delete
Sort
Child Lock
Name
√
√
√
√
√
√
√
1
2
Press the MENU button.
Fine Tune
† More
Result:
The main menu is displayed.
Move
Enter
Return
Press the ▲ or ▼ button to select Channel.
Result:
The options available in the Channelgroup are
displayed.
Child Lock
Prog. Ch.
Lock
3
4
Press the ENTER button.
-----
-----
-----
-----
-----
1
2
3
4
5
Unlocked
Unlocked
Unlocked
Unlocked
Unlocked
*
*
*
*
*
Press the ▲ or ▼ button to select Child Lock.
Press the ENTER button.
Result:
The Child Lockmenu is displayed with the current
channel automatically is selected.
Blue Screen is displayed when the Child Lockis
activated.
Move
Enter
Return
Child Lock
5
6
Press the … or † button to select the channel to be locked.
Prog. Ch.
Lock
Press the ENTER button. To lock the channel, select Lockedby
pressing the … or † button (to unlock the channel, select
Unlocked).
-----
-----
-----
-----
-----
1
2
3
4
5
Unlocked
Unlocked
Locked
Unlocked
Unlocked
*
*
*
*
*
7
Press the ENTER button to confirm.
Adjust
Enter
Return
English - 20
Assigning Names to Channels
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed, allowing
you to assign new names.
Channel
TV
TV
TV
Auto Store
Manual Store
Add/Delete
Sort
Child Lock
Name
√
√
√
√
√
√
√
1
2
Press the MENU button.
Result:
The main menu is displayed.
Fine Tune
† More
Press the ▲ or ▼ button to select Channel.
Move
Enter
Return
Result:
The options available in the Channelgroup are
displayed.
Name
3
4
Press the ENTER button.
Prog. Ch.
Name
Press the ▲ or ▼ button to select Name. Press the ENTER button.
-----
-----
-----
-----
-----
2
3
4
5
6
*
*
*
*
*
Result:
The Namemenu is displayed with the current channel
automatically is selected.
5
6
If necessary, select the channel to be assigned to a new name by
pressing the … or † button. Press the ENTER button.
Move
Enter
Return
Result:
Arrow indications are displayed around the name box.
Name
Press the … or † button to select a letter (A~Z), a number (0~9)
or a symbol (space, ., ).
-
Prog. Ch.
Name
Move on to the previous or next letter by pressing the œ or √
button.
-----
-----
-----
-----
-----
2
3
4
5
6
*
*
*
*
*
A
7
8
Repeat Steps 5 to 6 for each channel to be assigned to a new
name.
œ √ Move
Adjust
Return
When you have finished entering the name, press the ENTER
button to confirm the name.
English - 21
Fine Tuning Channel Reception
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
Channel
TV
Auto Store
Manual Store
Add/Delete
Sort
Child Lock
Name
√
√
√
√
√
√
√
1
2
Press the MENU button.
Fine Tune
† More
Result:
The main menu is displayed.
Move
Enter
Return
Press the ▲ or ▼ button to select Channel.
Result:
The options available in the Channelgroup are
displayed.
Fine Tune
P 1
3
4
Press the ENTER button.
0
Reset
Return
Press the ▲ or ▼ button to select Fine Tune.
Press the ENTER button.
Move
œ √ Adjust
Save
Result:
The horizontal bar is displayed.
Fine Tune
5
6
To obtain a sharp and clear picture and good sound quality, press
the œ or √ button until you reach the required setting.
P 1 ✻
3
To store the fine tuning setting in the TV’s memory, press the
ENTER button.
Reset
Return
Move
œ √ Adjust
Save
Result:
The symbol “✻” is displayed beside the programme
number.
Fine Tune
7
To reset the fine tuning to 0, select Resetby pressing the ▲ or ▼
button then press the ENTER button.
P 1 ✻
3
Reset
Return
Move
Enter
Fine Tune
P 1
0
Reset
Return
Move
Enter
English - 22
Using the LNA (Low Noise Amplifier) Feature
This feature is very useful in the situation that the TV is used in a
weak signal, and amplifies the TV signal in the weak signal area, but
not noise.
Channel
TV
… More
LNA
Scan
This feature is working only in a weak signal condition, and that is
memorized on relevant channel’s additional information.
: Off
On
1
2
Press the MENU button.
Result:
The main menu is displayed.
Move
Enter
Return
Press the ▲ or ▼ button to select Channel.
Result:
The options available in the Channelgroup are
displayed.
3
4
5
6
Press the ENTER button.
Press the ▲ or ▼ button to select LNA. Press the ENTER button.
Select Offor On by pressing the ▲ or ▼ button.
Press the ENTER button to confirm.
◆
◆
If the picture is noisy with the LNAset to On, select Off.
➢
LNA setting is to be made for each channel.
Viewing the Channel Scan Picture
This feature automatically scans all of the channels it has
memorized.
Channel
: Off
TV
… More
LNA
Scan
√
√
1
2
Press the MENU button.
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Channel.
Result:
The options available in the Channelgroup are
displayed.
Move
Enter
Return
3
4
Press the ENTER button.
Scan
P
1
Press the ▲ or ▼ button to select Scan. Press the ENTER button.
*
9
P
*
Return
Result:
You can view every memorized channel in order
through the sub picture. When viewing has finished or
stopped, the PIP feature will be activated
English - 23
Displaying Information
You can view the channel information and setting status you select
by pressing the “INFO” button on the remote control.
The information displayed varies according to the selected source.
P
1
*
Mono
Picture
Sound
SRS TSXT
Sleep Timer
Clock
Standard
Custom
Off
Off
-- am
--
:
TV
Freezing the Current Picture
You can freeze the picture when watching a television programme
simply by pressing the “STILL” button. To return to normal viewing,
press it again.
In the PIP mode, the main and sub pictures are stilled at
the same time.
➢
Still
English - 24
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
Picture
TV
Mode
Color Tone
Size
Digital NR
DNIe
My Color Control
: Standard
: Cool1
: 16 : 9
: Off
√
√
√
√
√
√
√
√
1
2
Press the MENU button.
Result:
The main menu is displayed.
: On
Press the ▲ or ▼ button to select Picture.
Film Mode
PIP
: Off
Result:
The options available in the Picturegroup are
displayed.
Move
Enter
Mode
Return
3
4
Press the ENTER button.
TV
Result:
The Modeis selected.
Mode
: Dynamic
Standard
Contrast
Brightness
Sharpness
Color
Tint G/R
Reset
Press the ENTER button again.
Cinema
65
50
50
Result:
The options available are displayed with the Modeis
selected
.
5
6
Press the ENTER button once again. Select the required option
by pressing the ▲ or ▼ button.
Move
Enter
Return
Result:
The following modes are available.
Dynamic - Standard - Cinema
Press the ENTER button to confirm.
You can also select these options simply by pressing the
P.MODE (Picture Mode) button.
➢
English - 25
Adjusting the Picture Settings
Your television has several settings which allow you to control
picture quality.
Picture
TV
Mode
Color Tone
Size
Digital NR
DNIe
My Color Control
: Standard
: Cool1
: 16 : 9
: Off
√
√
√
√
√
√
√
√
1
2
Press the MENU button.
Result: The main menu is displayed.
: On
Press the ▲ or ▼ button to select Picture.
Result: The options available in the Picturegroup are
Film Mode
PIP
: Off
Move
Enter
Return
displayed.
3
4
Press the ENTER button.
TV
Mode
Result:
The Pictureis selected.
Mode
: Standard
√
100
50
65
50
Contrast
Brightness
Sharpness
Color
Tint G/R
Reset
Press the ENTER button again.
Result:
The options available are displayed with the Modeis
selected
50
.
5
Select the required option (Contrast, Brightness, Sharpness,
Coloror Tint G/R-NTSC only) by pressing the ▲ or ▼ button.
Press the ENTER button.
Move
Enter
Return
100
The options are adjustable in each mode (Dynamic,
➢
Contrast
Standardor Cinema).
6
7
Press the œ or √ button until you reach the required setting.
Press the ENTER button.
TV
Mode
Result:
The Modemenu is displayed again.
Mode
: Standard
√
100
50
65
50
Contrast
Brightness
Sharpness
Color
To reset the picture settings to the factory defaults, select Reset
by pressing the ▲ or ▼ button. Press the ENTER button.
Tint G/R
Reset
50
Result:
The previously adjusted picture settings will be reset to
the factory defaults.
Move
Enter
Return
8
9
Press the MENU button.
Result: The options available in the Picturegroup are
displayed again.
Picture
TV
Mode
: Standard
:
Cool2
:
Cool1
: Normal
Press the ▲ or ▼ button to select Color Tone.
Press the ENTER button.
Color Tone
Size
Digital NR
DNIe
Warm1
Warm2
:
10 Select the required option by pressing the ▲ or ▼ button.
My Color Control
Film Mode
PIP
: Off
Result:
The following modes are available.
Cool2 - Cool1 - Normal - Warm1 - Warm2
Move
Enter
Return
11 Press the ENTER button to confirm.
English - 26
Selecting the Picture Size
You can select the picture size which best corresponds to your
viewing requirements.
Picture
TV
TV
TV
Mode
Color Tone
Size
Digital NR
DNIe
: Standard
: Cool1
: 16 : 9
: Off
√
√
√
√
√
√
√
√
1
2
Press the MENU button.
Result:
The main menu is displayed.
: On
My Color Control
Press the ▲ or ▼ button to select Picture.
Film Mode
PIP
: Off
Result:
The options available in the Picturegroup are
displayed.
Move
Enter
Size
Return
Return
Return
3
4
Press the ENTER button.
16:9
Press the ▲ or ▼ button to select Size. Press the ENTER button.
Panorama
Zoom1
Zoom2
14:9
Result :
The following modes are available depending on the
model.
4:3
◆ 16:9 - Panorama - Zoom1 - Zoom2 - 14:9 -
4:3
Move
Enter
Size
Lifting is available in the Zoom1, Zoom2or
14:9mode by pressing the ▲ or ▼ button.
➢
◆ 16:9 - 4:3
16:9
(PC, HDMI or DVI Mode)
.
Panorama
Zoom1
Zoom2
14:9
The picture position (
adjustment are available in these mode by
,
) and size (
)
➢
pressing the ▲ or ▼ button. (Not available
for DTV signals - 480p, 576p, 720p, 1080i.)
4:3
5
Select the required mode by pressing the ▲ or ▼ button.
Press the ENTER button.
√
Move
Enter
◆ You can select these option by simply pressing the
➢
P.SIZE button on the remote control.
◆ You can not select Panorama screen size in the
Component mode.
◆ You can select only 16:9, 4:3 screen size in the PC or
HDMI mode.
◆ With PIP On, the screen automatically becomes 16:9
screen size.
◆ PIP will disappear automatically when you change
screen size with PIP on.
English - 27
Using the Digital NR (Noise Reduction) Feature
If the signal received by your television is weak, you can activate
this feature to help reduce any static and ghosting that may appear
on the screen.
Picture
TV
Mode
: Standard
Color Tone
Size
Digital NR
DNIe
My Color Control
Film Mode
PIP
: Cool1
: 16 : 9
: Off
1
2
Press the MENU button.
Off
Result:
The main menu is displayed.
: On
Press the ▲ or ▼ button to select Picture.
: Off
Result:
The options available in the Picturegroup are
displayed.
Move
Enter
Return
3
4
Press the ENTER button.
Press the ▲ or ▼ button to select Digital NR.
Press the ENTER button.
5
6
Select Offor On by pressing the … or † button.
Press the ENTER button to confirm.
TM
DNIe (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise
reduction, detail enhancement, contrast enhancement and white
enhancement.
Picture
TV
Mode
Color Tone
Size
Digital NR
DNIe
: Standard
: Cool1
: 16 : 9
: Off
1
2
Press the MENU button.
: O
Off
Result:
The main menu is displayed.
My Color Control
Demo
On
:
Film Mode
PIP
Press the ▲ or ▼ button to select Picture.
Result:
The options available in the Picturegroup are
displayed.
Move
Enter
Return
3
4
5
Press the ENTER button.
DNIe Demo
Press the ▲ or ▼ button to select DNIe. Press the ENTER button.
Press the ▲ or ▼ button to change the setting.
DNIe On
DNIe Off
◆ Off
Switches off the DNIe mode.
◆ Demo
The screen before applying DNIe appears on the
right and the screen after applying DNIe appears
on the left.
◆ On
Switches on the DNIe mode.
6
Press the ENTER button to confirm.
You can select these options simply by pressing the DNIe
button.
➢
English - 28
Setting the My Color Control (Easy Control)
This feature allows you to adjust colors to according to their
preferences, by adjusting skin, sky and grass tones using the
predefined settings (“Blue”, “Green”, “Pink”, “Standard”,
“Custom”) without affecting other colors on the screen.
Picture
TV
Mode
Color Tone
Size
Digital NR
DNIe
: Standard
: Cool1
: 16 : 9
: Off
√
√
√
√
√
√
√
√
: On
1
2
Press the MENU button.
My Color Control
Film Mode
PIP
: Off
Result:
The main menu is displayed.
Move
Enter
Return
Press the ▲ or ▼ button to select Picture.
Result:
The options available in the Picturegroup are
displayed.
My Color Control
TV
Easy Control
Detail Control
: Custom
√
√
3
4
Press the ENTER button.
Press the ▲ or ▼ button to select My Color Control.
Press the ENTER button.
Result:
The options available are displayed with the Easy
Controlis selected
.
Move
Enter
Return
5
Press the ENTER button.
Result :
The following modes are available:
◆ Blue
Original
Custom
Emphasizes Clear Blues.
◆ Green
Emphasizes Mild Greens.
◆ Pink
Easy Control
Emphasizing Warm Skin Colors.
œ
Standard
Custom
œ √ Move
Enter
Return
◆ Standard
Standard Picture.
◆ Custom
Changing the settings in the Detail Control
menu will automatically set to Custom(see next
page).
6
Select the required mode by pressing the œ or √ button.
Result :
The original picture (before adjustment) is shown on
the left side, while the selected mode is shown on the
right side.
7
Press the ENTER button to confirm.
◆
◆
Depending on the input source (PC format signal of PC or
HDMI mode), this feature may not operate.
➢
This feature is operated when the “DNIe” is set to “On”
or “Demo” mode.
English - 29
Setting the My Color Control (Detail Control)
This settings can be adjusted to suit your personal preferences.
Picture
TV
TV
TV
Mode
Color Tone
Size
Digital NR
DNIe
: Standard
: Cool1
: 16 : 9
: Off
√
√
√
√
√
√
√
√
1
2
Press the MENU button.
Result:
The main menu is displayed.
: On
Press the ▲ or ▼ button to select Picture.
My Color Control
Film Mode
PIP
: Off
Result:
The options available in the Picturegroup are
displayed.
Move
Enter
Return
3
4
Press the ENTER button.
My Color Control
Easy Control : Blue
Detail Control
Press the ▲ or ▼ button to select My Color Control.
Press the ENTER button.
√
√
5
Press the ▲ or ▼ button to select Detail Control.
Press the ENTER button.
Result:
The available options are displayed.
6
7
Select the required option (Pink, Greenor Blue) by pressing the
Move
Enter
Return
▲ or ▼ button. Press the ENTER button.
Press the œ or √ button until you reach the required setting.
Detail Control
Pink
Green
Blue
50
50
50
Result :
Changing the adjustment value will refresh the adjusted
screen.
Reset
8
9
Press the MENU button.
Result: The options available in the Detail Controlgroup
are displayed again.
Move
Enter
Return
To return the factory defaults, select Resetby pressing the … or
† button.
Result:
The previously adjusted colors will be reset to the
factory defaults.
Original
Adjusted
10 Press the ENTER button.
Detail Control
Pink
50
Return
Move
œ √ Adjust
TV
Detail Control
Pink
Green
Blue
50
50
50
Reset
Move
Enter
Return
English - 30
Setting the Film Mode
You can automatically sense and process film signals from all sources
and adjust the picture for optimum quality.
Picture
TV
Mode
Color Tone
Size
Digital NR
DNIe
: Standard
: Cool1
: 16 : 9
: Off
1
2
Press the MENU button.
Result:
The main menu is displayed.
: On
My Color Control
Press the ▲ or ▼ button to select Picture.
Film Mode
PIP
:
Off
On
Result:
The options available in the Picturegroup are
displayed.
Move
Enter
Return
3
4
Press the ENTER button.
Press the ▲ or ▼ button to select Film Mode.
Press the ENTER button.
5
Select Offor On by pressing the ▲ or ▼ button.
◆ Off
Switches off the film mode.
◆ On
Automatically senses and processes film signals from
all sources and adjusts the picture for optimum quality.
6
Press the ENTER button to confirm.
Film mode is supported in 480i mode only.
➢
English - 31
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of TV program
or external A/V devices. In this way you can watch TV program or
monitor the video input from any connected devices while watching
TV or other video input.
Picture
TV
TV
TV
TV
TV
Mode
Color Tone
Size
Digital NR
DNIe
: Standard
: Cool1
: 16 : 9
: Off
√
√
√
√
√
√
√
√
: On
1
2
Press the MENU button.
My Color Control
Film Mode
PIP
: Off
Result:
The main menu is displayed.
Move
Enter
Return
Press the ▲ or ▼ button to select Picture.
Result:
The options available in the Picturegroup are
displayed.
PIP
PIP
: Off
3
4
Press the ENTER button.
On
Source
Swap
Size
Position
Prog.
:
Press the ▲ or ▼ button to select PIP. Press the ENTER button.
:
:
Result:
The PIPis selected.
: P6
5
6
Press the ENTER button again. To activate, set the PIP to On by
pressing the ▲ or ▼ button. Press the ENTER button.
Move
Enter
Return
Press the ▲ or ▼ button to select Source. Press the ENTER
button. Select a source of the sub picture by pressing the ▲ or ▼
button.
PIP
PIP
: TV
:
Ext
AV1
AV2
AV3
Source
Swap
Size
Position
Prog.
Result:
The available sources are displayed:
TV - Ext - AV1 AV2 AV3
:
-
-
-
S-Video1
-
:
S-Video1
S-Video2
S-Video2 S-Video3 Component1
-
-
-
:
Component2 PC HDMI
-
-
When the main picture is in the Component(480p/576p/
➢
Move
Enter
Return
720p/1080i), PC or HDMImode, only the TV, Ext, AV1, AV2,
AV3, S-Video1, S-Video2or S-Video3sources available.
PIP
7
8
Press the ENTER button.
PIP
: On
: TV
√
√
√
√
√
√
Source
Swap
Size
Position
Prog.
Press the ▲ or ▼ button to select Swap. Press the ENTER button.
:
:
Result:
The main picture and sub picture are interchanged.
: P6
9
Press the ▲ or ▼ button to select Size. Press the ENTER button.
Select a size of the sub picture by pressing the ▲ or ▼ button.
Move
Enter
Return
Result:
The available sizes are displayed:
- Large
- Small
PIP
- Double1
- Double2
PIP
: On
: TV
Source
Swap
Size
Position
Prog.
:
:
10 Press the ENTER button.
:
Move
Enter
Return
English - 32
Viewing the Picture In Picture (PIP) (continued)
11 Press the ▲ or ▼ button to select Position. Press the ENTER
button. Select a position of the sub picture by pressing the ▲ or ▼
button.
PIP
TV
PIP
: On
: TV
Source
Swap
Size
Result:
The available positions are displayed:
:
Position
Prog.
:
:
Move
Enter
Return
Position can not be selected in the “
(Double2) picture size mode.
” (Double1) or “
”
➢
PIP
TV
12 Press the ENTER button.
PIP
: On
: TV
Source
Swap
Size
Position
Prog.
13 Press the ▲ or ▼ button to select Prog.. Press the ENTER
button. Select the channel that you want to view through sub
picture by pressing the ▲ or ▼ button.
:
:
:
P6
14 Press the ENTER button.
Move
Enter
Return
Easy functions of remote control.
Buttons
PIP
Feature
Used to activate or deactivate the PIP function directly.
SWAP
Used to interchange the main picture and the sub
picture.
When the main picture is in the Video mode and
➢
the sub picture is in the TV mode, you might not
hear the sound of main picture when pressing
the SWAP button after changing the sub picture
channel. At this time, reselect the channel of
main picture.
P
/
Used to select the channel of sub picture.
English - 33
Changing the Sound Standard
You can select the type of special sound effect to be used when
watching a given broadcast.
TV
Sound
Mode
: Custom
√
√
√
√
√
Equalizer
SRS TSXT
Auto Volume
Internal Mute
1
2
3
Press the MENU button.
: Off
: Off
: Off
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Sound.
Result:
The options available in the Soundgroup are displayed.
Move
Enter
Return
Press the ENTER button.
Sound
Result:
The Modeis selected.
TV
Mode
: Standard
Music
4
5
Press the ENTER button again.
Equalizer
SRS TSXT
Auto Volume
Internal Mute
Movie
:
Speech
:
Select the option by pressing the … or † button.
The sound effects are displayed in the following order.
Custom
: Off
Standard
-
Music
-
Movie
-
Speech
-
Custom.
Move
Enter
Return
6
Press the ENTER button to confirm.
You can also set these options simply by pressing the
S.MODE (Sound Mode) button.
➢
English - 34
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal preferences.
TV
Sound
Mode
: Custom
√
√
√
√
√
1
2
Press the MENU button.
Equalizer
SRS TSXT
Auto Volume
Internal Mute
Result:
The main menu is displayed.
: Off
: Off
: Off
Press the ▲ or ▼ button to select Sound.
Result:
The options available in the Soundgroup are displayed.
Move
Enter
Return
3
4
Press the ENTER button.
Press the ▲ or ▼ button to select Equalizer.
Press the ENTER button.
Equalizer
TV
Result:
The Equalizermenu is displayed with the current
option.
R
L
+
0
-
+
0
-
5
6
Select the option to be adjusted by pressing the œ or √ button.
Press the ▲ or ▼ button until you reach the required setting.
100Hz 300Hz 1KHz 3KHz 10KHz
Press the ENTER button to confirm.
√
Move
Adjust
Return
If you make any changes to the equalizer settings, the
sound standard is automatically switched to the Custom.
➢
Setting the SRS TSXT
TruSurround XT is a patented SRS technology that solves the problem of
playing 5.1 multichannel content over two speakers. TruSurround delivers a
compelling, virtual surround sound experience through any two-speaker
playback system, including internal television speakers. It is fully compatible
with all multichannel formats.
TV
Sound
Mode
: Custom
Equalizer
SRS TSXT
Auto Volume
Internal Mute
:
:
:
Off
3D Mono
Stereo
1
2
Press the MENU button.
Result:
The main menu is displayed.
Move
Enter
Return
Press the … or † button until the Soundis selected.
Result:
The options available in the Soundgroup are displayed.
3
4
Press the ENTER button.
Press the … or † button until the SRS TSXTis selected.
Press the ENTER button.
5
Select Off, 3D Monoor Stereo by pressing the … or † button.
Press the ENTER button.
TruSurround XT, SRS and (
) symbol
➢
are trademarks of SRS Labs, Inc.
TruSurround XT technology is
incorporated under license from SRS
Labs, Inc.
You can also set these options simply by pressing the SRS
➢
(
)button.
English - 35
Adjusting the Volume Automatically
Each broadcasting station has its own signal conditions, and so it
is not easy for you to adjust the volume every time the channel is
changed. This feature lets you automatically adjust the volume of
the desired channel by decreasing the sound output when the
modulation signal is high or by increasing the sound output when
the modulation signal is decrease.
TV
Sound
Mode
: Custom
Equalizer
SRS TSXT
Auto Volume
Internal Mute
: Off
:
:
Off
On
1
2
Press the MENU button.
Move
Enter
Return
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Sound.
Result:
The options available in the Soundgroup are displayed.
3
4
Press the ENTER button.
Press the ▲ or ▼ button to select Auto Volume.
Press the ENTER button.
5
Select Offor On by pressing the ▲ or ▼ button.
Press the ENTER button.
English - 36
Enjoying the Sound of External Speakers
When using a device such as Home Theater or Amplifier with
external speakers, you can set “Internal Mute” to “On” to cutoff
sound from the TV’s internal speakers.
TV
Sound
Mode
: Custom
Equalizer
SRS TSXT
Auto Volume
Internal Mute
: Off
: Off
1
2
Press the MENU button.
: Off
On
Result:
The main menu is displayed.
Press the … or † button until the Soundis selected.
Move
Enter
Return
Result:
The options available in the Soundgroup are displayed.
3
4
Press the ENTER button.
Press the … or † button until the Internal Muteis selected.
Press the ENTER button.
5
6
Select Offor Onby pressing the ▲ or ▼ button.
Press the ENTER button to confirm.
The
Internal Muteis set to On. At this time, if you press the
or MUTE button, the message Not Availableis
displayed.
/
or MUTE button doesn’t operate when the
➢
/
English - 37
Selecting the Sound Mode (depending on the model)
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual I ” or “Stereo”, depending on
the current transmission.
Type of broadcast
On-screen indication
Regular broadcast
(Standard audio)
Mono (Normal use)
Regular +
NICAM Mono
NICAM Mono
NICAM Stereo
↔
↔
Mono
Mono
NICAM
Stereo
NICAM Stereo
(Forced mono)
NICAM Dual 1
NICAM Dual 2
→
→
NICAM Dual 1/2
Mono
Regular broadcast
(Standard audio)
Mono
A2
Stereo
Bilingual or Dual I/II
Stereo
Dual I
↔
Dual II
Mono
Stereo
↔
(Forced mono)
◆ If the receiving conditions deteriorate, listening will be
➢
easier if the mode is set to the Mono.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the Mono.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the side of the
television. If the mono sound comes out only from left
speaker, press the DUAL I-II button.
English - 38
Setting and Displaying the Current Time
You can set the television’s clock so that the current time is displayed
by pressing the “INFO “ button. You must also set the time if you
wish to use the automatic on or off timers.
Setup
TV
TV
TV
Plug & Play
Language
Time
Blue Screen
Melody
√
√
√
√
√
√
√
: English
When pressing the power switch toward “OFF” (O) on the
side of the television, the clock setting will be reset.
➢
: Off
: On
Color Weakness: Off
PC
1
2
Press the MENU button.
Move
Enter
Return
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Time
Result:
The options available in the Setupgroup are displayed.
Clock Set
- -
: Off
Off
:
- - am
√
√
√
√
Sleep Timer
On Timer
3
4
Press the ENTER button.
Off Timer
Off
Press the ▲ or ▼ button to select Time. Press the ENTER button.
Result:
The options available in the Timegroup are displayed
with Clock Setis selected.
Move
Enter
Return
5
6
Press the ENTER button again.
Result:
The Clock Setmenu is displayed.
Clock Set
Press the œ or √ button to move to the Hour, Minute, or am/pm.
Set the current time by pressing the ▲ or ▼ button.
Hour Minute am/pm
12
00
am
7
8
When you have finished, press the EXIT button to exit.
Press the INFO button to display the current time.
√
Move
Adjust
Return
English - 39
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes after
which the television automatically switches to standby mode.
Setup
TV
Plug & Play
Language
Time
Blue Screen
Melody
√
√
√
√
√
√
√
1
2
Press the MENU button.
: English
Result:
The main menu is displayed.
: Off
: On
Color Weakness: Off
PC
Press the ▲ or ▼ button to select Setup.
Result:
The options available in the Setupgroup are displayed.
Move
Enter
Return
3
4
Press the ENTER button.
Press the ▲ or ▼ button to select Time. Press the ENTER button.
Time
TV
Clock Set
11 : 35 am
Result:
The options available in the Timegroup are displayed.
Sleep Timer
On Timer
:
Off
30
60
5
6
7
Press the ▲ or ▼ button to select Sleep Timer. Press the
ENTER button.
Off Timer
90
120
150
180
Select the preset time intervals (Off, 30, 60, 90, 120, 150, 180) by
pressing the … or † button.
Move
Enter
Return
Press the ENTER button to confirm.
◆
◆
You can also set these options simply by pressing the
SLEEP button.
➢
➢
If the sleep timer is not yet set, Off is displayed.
If the sleep timer is already set, the remaining time
before which the television switches to Standby mode
is displayed.
Your TV automatically turns off when it receives no input
signal for 15 minutes or longer.
English - 40
Switching the Television On and Off Automatically
You can set the On or Off timers so that the television will:
◆ Switch on automatically and tune to the channel of your
Setup
TV
choice at the time you select
Plug & Play
Language
Time
Blue Screen
Melody
Color Weakness: Off
PC
√
√
√
√
√
√
√
: English
◆ Switch off automatically at the time you select
: Off
: On
The first step is to set the television’s clock (refer to “Setting
and Displaying the Current Time” on page 39). If you have
not yet set the clock, the message Set the clock first
is displayed.
➢
Move
Enter
Return
1
2
Press the MENU button.
Result:
The main menu is displayed.
Time
TV
TV
TV
Clock Set
11 : 35 am
√
√
√
√
Press the ▲ or ▼ button to select Setup.
Sleep Timer
On Timer
: Off
Result:
The options available in the Setupgroup are displayed.
Off
Off
Off Timer
3
4
Press the ENTER button.
Press the ▲ or ▼ button to select Time. Press the ENTER button.
Result:
The options available in the Timegroup are displayed.
Move
Enter
Return
5
Press the ▲ or ▼ button to select On Timer.
Press the ENTER button.
On Timer
Result:
The options available in the On Timergroup are
displayed.
Hour Minute am/pm
12
00
am
6
7
8
Select the Hour, Minute, am/pm, Prog.(programme number) or
Volumeby pressing the œ or √ button.
Set these by pressing the ▲ or ▼ button.
Prog.
P 1
Volume
10
Activation
No
To activate the On timer with the settings satisfied, select
Activationby pressing the œ or √ button,then select Yesby
pressing the ▲ or ▼ button.
√
Move
Adjust
Return
Press the MENU button.
Off Timer
Hour Minute am/pm
Result:
The options available in the Timegroup are displayed
again.
12
00
Activation
No
am
9
Press the ▲ or ▼ button to select Off Timer.
Press the ENTER button.
Result:
The options available in the Off Timergroup are
displayed.
√
Move
Adjust
Return
10 Set the Off Timeras methods for On Timersetting.
Auto Power Off
➢
Auto Power OFF will automatically turn the TV off if you
do not operate any controls within 3 hours after the TV is
turned on by the timer. This function is available in the
timer “On” mode only and will prevent a leakage accident
or overheating caused by your TV being left on too long.
English - 41
Setting the Blue Screen
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background. If you
wish to continue viewing the poor picture, you must set the “Blue
Screen“ mode to “Off“.
Setup
TV
Plug & Play
Language
Time
Blue Screen
Melody
: English
: Off
1
2
Press the MENU button.
On
:
Color Weakness: Off
PC
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Move
Enter
Return
Result:
The options available in the Setupgroup are displayed.
3
4
Press the ENTER button.
Press the ▲ or ▼ button to select Blue Screen.
Press the ENTER button.
5
6
Select Offor Onby pressing the ▲ or ▼ button.
Press the ENTER button.
Setting the Melody Sound
You can hear melody sound when the television is powered on or
off.
Setup
TV
Plug & Play
Language
Time
Blue Screen
Melody
1
Press the MENU button.
: English
: Off
Result:
The main menu is displayed.
Off
On
:
Color Weakness:
PC
2
Press the ▲ or ▼ button to select Setup.
Result:
The options available in the Setupgroup are displayed.
Move
Enter
Return
3
4
Press the ENTER button.
Press the ▲ or ▼ button to select Melody.
Press the ENTER button.
5
6
Select Offor Onby pressing the ▲ or ▼ button.
Press the ENTER button.
English - 42
Using the Color Weakness Enhancement Feature
This feature adjusts the Red, Blue or Green color to enhance the
picture according to the user's particular color weakness.
Setup
TV
Plug & Play
Language
Time
Blue Screen
Melody
Color Weakness: Off
PC
√
√
√
√
√
√
√
: English
1
2
Press the MENU button.
: Off
: On
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Result:
The options available in the Setupgroup are displayed.
Move
Enter
Return
3
4
Press the ENTER button.
TV
Color Weakness
Color Weakness: Off
Press the … or † button to select Color Weakness.
Press the ENTER button.
On
Red
0
0
Result:
The options available in the Color Weakness
group are displayed.
Green
Blue
5
6
Press the ENTER button again.
Press the … or † button to select On, then press the
ENTER button.
Move
Enter
Return
Press the … or † button to select the color you wish to adjust,
then press the ENTER button.
TV
Color Weakness
7
8
Press the œ or √ button to adjust to your preference.
Color Weakness: On
Red
Green
Blue
√
0
0
Press the MENU or ENTER button to confirm.
0
Move
Enter
Return
Color Weakness
Red
0
Move
œ √ Adjust
Return
English - 43
Setting the Picture in PC Mode
Preset to the PC mode by using the SOURCE button.
➢
1
Press the MENU button.
Setup
TV
Result:
The main menu is displayed.
Plug & Play
Language
Time
Blue Screen
Melody
√
√
√
√
√
√
√
: English
2
Press the ▲ or ▼ button to select Setup.
: Off
: On
Result:
The options available in the Setupgroup are displayed.
Color Weakness: Off
PC
3
4
Press the ENTER button.
Move
Enter
Return
Press the ▲ or ▼ button to select PC. Press the ENTER button.
Result:
The options available in the PC group are displayed.
TV
PC
5
6
Select Coarseor Fineby pressing the ▲ or ▼ button.
Coarse
50
0
Press the ENTER button.
Fine
Position
√
√
Press the œ or √ button until you reach the required setting.
Press the ENTER button.
Auto Adjustment
Result:
The PC menu is displayed again.
Move
Enter
Return
7
8
Press the ▲ or ▼ button to select Position.
Press the ENTER button.
Set to the required position by pressing the …/†/œ/√ button.
Press the ENTER button.
Coarse
50
To adjust the screen quality and position automatically, select the
Auto Adjustmentby pressing the ▲ or ▼ button.
Result:
The Auto Adjustmentis displayed. The screen quality
and position are automatically adjusted
Position
TV
.
9
Press the ENTER button.
Adjust
Enter
Return
Auto Adjustment
English - 44
Viewing an External Signal Source
Use the remote control to switch between viewing signals from
connected equipment, such as VCR, DVD, Set-Top box and the TV
source (broadcast or cable).
Input
: TV
TV
Source List
Edit Name
√
√
1
2
Press the MENU button.
Result:
The main menu is displayed.
Press the ▲ or ▼ button to select Input.
Move
Enter
Return
Result:
The options available in the Inputgroup are
displayed.
Source List
TV
3
Press the ENTER button.
Result: The options available in the Source Listgroup are
TV
Ext
AV1
AV2
----
HD STB
DVD
displayed.
AV3
TV
4
5
6
Press the ENTER button again.
S-Video1
S-Video2
† More
DVD
Press the ▲ or ▼ button to select the signal source.
Press the ENTER button.
Move
Enter
Return
You can also set these options simply by pressing the
SOURCE button. If you change the external source while
viewing, pictures might take a short period of time to be
switched.
➢
English - 45
Assigning Names to External Sources
This feature enables you to name the input source you have
connected.
Input
: TV
TV
Source List
Edit Name
√
√
1
2
Press the MENU button.
Result: The main menu is displayed.
Press the ▲ or ▼ button to select Input.
Result: The options available in the Inputgroup are
Move
Enter
Return
displayed.
3
4
Press the ENTER button.
Edit Name
TV
Ext
AV1
AV2
AV3
S-Video1
S-Video2
S-Video3
† More
:
:
:
:
:
:
:
--------
VCR
Press the ▲ or ▼ button to select Edit Name.
Press the ENTER button.
DVD
CHabDleSSTBTB
5
Press the ▲ or ▼ button to select the external source to be edited.
Press the ENTER button.
Satellite STB
AV Receiver
Result:
The device names available are listed
.
Move
Enter
Return
VCR DVD Cable STB HD STB
-
-
-
-
-
Satellite STB
Game
-
AV Receiver DVD Receiver
Camcorder DVD Combo DHR(DVD HDD Recorder)
PC TV.
-
-
-
-
-
-
6
7
Select the required device by pressing the ▲ or ▼ button.
Press the ENTER button to confirm.
English - 46
Teletext Feature
Most television channels provide written information services via
teletext. Information provided includes:
◆
◆
◆
◆
Television programme times
News bulletins and weather forecasts
Sports results
Travel information
This information is divided into numbered pages (see diagram).
Part
Contents
A
B
C
D
E
F
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
Teletext information is often divided between several
pages displayed in sequence, which can be accessed by:
➢
◆ Entering the page number
◆ Selecting a title in a list
◆ Selecting a colored heading (FASTEXT system)
English - 47
Displaying the Teletext Information
You can display Teletext information at any time on your television.
For Teletext information to be displayed correctly,
channel reception must be stable; otherwise:
☛
◆ Information may be missing
◆ Some pages may not be displayed
1
2
Select the channel providing the Teletext service by pressing the
or P button.
P
Press the TTX/MIX (
Result: The contents page is displayed. It can be redisplayed
at any time by pressing the (index) button.
) button to activate the teletext mode.
3
Press the TTX/MIX ( ) button again.
Result:
The screen will be split into two. This Double Teletext
feature lets you view the actual broadcast and teletext
information separately on the screen.
4
5
If you wish to display the teletext information on a single screen,
press the TTX/MIX ( ) button again.
To exit from the teletext display, press the TV (
) button.
Selecting Display Options
When you have displayed a Teletext page, you can select various
options to suit your requirements.
To display...
Press the...
◆
Hidden text
(reveal)
(answers to quiz games, for example)
◆
◆
◆
The normal screen
(reveal) again
A secondary page by entering its number
The broadcast when searching for a page
(sub-page)
(cancel)
◆
◆
The next page
(page up)
The previous page
(page down)
◆
Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
◆
The normal screen
• Three times
English - 48
Selecting a Teletext Page
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by
pressing the corresponding numeric buttons.
Result:
The current page counter is incremented and the
page is then displayed. If the selected page is linked
with several secondary pages, the secondary pages
are displayed in sequence. To freeze the display on a
given page, press the
to resume.
(hold) button. Press it again
2
If the FASTEXT system is used by the broadcasting company,
the different topics covered on a Teletext page are color-coded
and can be selected by pressing the colored buttons on the
remote control.
Press the colored button corresponding to the topic that you wish
to select; the available topics are given on the status line.
Result:
The page is displayed with other colored information
that can be selected in the same way.
3
4
To display the previous or next page, press the corresponding
colored button.
To display the subpage, see the following steps.
◆
Press the
Result:
(sub-page) button.
The available subpages appear.
◆
Select the required sub-page. Sub-pages can be scrolled by
pressing the or button.
English - 49
Connecting to the External Input/Output
Side of the TV
(depending on the model)
(Input)
Rear of the TV
(Input/Output)
VCR
③
➃
①
Decoder /
Video game device
Video disc player
Satellite receiver
②
or
or
➄
①
②
This end can be fitted with:
◆ Three RCA connectors (VIDEO + AUDIO-L and R)
This end can be fitted with:
◆ A SCART connector
◆ Three RCA connectors (VIDEO + AUDIO-L and R)
◆ An S-Video connector and two audio RCA connectors (L+R)
③
If you have a second VCR and wish to copy cassettes tape, connect the source VCR to IN 1 (or IN 2)
and the target VCR to OUT so that you can redirect the signal from source VCR to target VCR.
If you have a decoder, connect the decoder to the VCR and the VCR to the television.
When you wish to record a programme, connect the receiver to IN 1 (or IN 2) and the VCR to OUT so
that you can redirect the signal from IN 1 (or IN 2) to OUT.
➃
➄
Scart supports only TV signal output.
➢
AV OUT
Viewing Source
Audio
Available.
Video
Available.
TV
AV1/AV2/AV3
Available.
Available.
S-Video1/S-Video2/S-Video3
Available.
Available. (Mixed Video)
Not available.
Component1/ Component2/PC/HDMI
Not available.✽
✽
It is available when the InternalMuteis set to On. For details, refer to “Enjoying the Sound of
External Speakers” on page 37.
English - 50
Connecting to the S-Video Input
The “S-VIDEO” and “AUDIO-L/R” connectors are used for equipment with an S-Video output, such
as a camcorder or VCR.
Rear of the TV
and
Camcorder
VCR
Side of the TV
and
To play picture and sound, both the S-VIDEO and AUDIO-L/R connectors must be used.
➢
English - 51
Connecting to the Digital Input
The “HDMI/DVI IN” and “AUDIO-L/R” connectors are used for equipment with a digital output.
By inputting a high-bandwidth digital content protection high-definition picture source to these
jacks, high-definition pictures can be displayed on the screen in their digital forms.
Rear of the TV
Personal Computer
and
or
DVD
Rear of the TV
DTV receiver
The “HDMI/DVI IN” does not support the Analog R (red), G (green) and B (blue) signals.
➢
Please check if the HDMI source’s power is on, in case that
☛
you fail to select HDMI from the “Source List” even after you
connected the cable of the HDMI source (DTV Set-Top Box,
DVD, etc.) to TV.
English - 52
Connecting to the Component Input
Rear of the TV
DVD
DTV receiver
The COMPONENT IN 1 (or COMPONENT IN 2) connectors are used for equipment with a DVD or
DTV receiver output. (480i, 480p, 576i, 576p, 720p, 1080i)
➢
Connecting to the PC Input
The “PC” (video) and “AUDIO-L/R” connectors are used for interfacing with your PC.
Rear of the TV
Personal Computer
and
English - 53
Setting up Your PC Software (Windows only)
The Windows display-settings for a typical computer are shown below. But the actual screens on your
PC will probably be different, depending upon your particular version of Windows and your particular
video card. But even if your actual screens look different, the same, basic set-up information will apply
in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1
Right click the mouse on the Windows Desktop,
then click on Properties. The Display Dialog-Box
will be displayed.
2
Click on Settings, then set the Display Mode
with reference to the Display Modes Table. You
do not need to change the Colours settings.
3
4
Click on Advanced. A new settings dialog box
will be displayed.
Click on the Monitor tab, then set the Screen
Refresh Rate with reference to the Display
Modes Table. Set the Vertical Frequency and
Horizontal Frequency individually if you can do
so instead of setting the Screen Refresh Rate.
2
3
5
Press the OK button, close the window, then
press the OK button on the Display Registration
Information window. Automatic re-booting may
commence at this moment.
6
Shutdown the PC, and connect it to your TV.
(See page 53)
◆
The actual screens on your PC may look
different, depending on your particular
version of Windows and the type of your
PC.
➢
4
5
◆
◆
When you use your TV as a PC monitor, it
supports Colours up to 32 bits.
In this case, the display on the TV may look
different depending on your particular
version of Windows or the PC
manufacturer.
◆
When connecting a PC (including the DVI
connection), you must set it to the display
settings that are supported by the TV.
Otherwise, the message Out of input
range will be displayed.
English - 54
PC/HDMI(DVI) Input Mode
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The table below shows all of the display modes that are supported:
Horizontal
frequency (kHz)
Vertical
frequency (Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
Standard
Resolution
VGA
720 x 400
640 x 480
31.47
31.47
35.00
37.86
37.50
43.27
35.16
37.88
48.08
46.87
53.67
49.73
48.36
56.40
60.02
31.25
31.50
37.50
45.00
28.125
33.75
70.00
60.00
66.70
72.80
75.00
85.00
56.30
60.30
72.20
75.00
85.10
74.60
60.00
70.10
75.00
50.00
60.00
50.00
60.00
50.00
60.00
28.322
25.175
30.24
31.50
31.50
36.00
36.00
40.00
50.00
49.50
56.25
57.284
65.00
75.00
78.75
27.00
27.027
74.25
74.25
74.25
74.25
-/-
-/+
-/-
-/-
-/-
-/-
SVGA
XGA
800 x 600
-+/
-
+/+
-
+/+
+/+
+/+
832 x 624
1024 x 768
-/+
-/-
-/-
+/
-
DTV
(EIA/CEA-
861-B)
720 x 576
720 x 480
1280 x 720p
X
X
X
X
X
X
1920 x 1080i
◆ The interlace mode is not supported.
◆ The television might operate abnormally if a non-standard video format is selected.
◆ The 4:3 mode does not work with input signals from “720 x 400”.
◆ 640 x 480 PC signal is basically recognized as 720 x 480 TV signal in PC/HDMI mode.
Select ‘PC’ in Edit Name to recognize the signal as 640 x 480 PC signal.
Refer to Assigning Names to External Sources on page 46.
Notes
◆ The text quality of PC screen is optimum in the XGA mode (1024 x 768), the full size displayed PC
mode is optimum in the SVGA mode (800 x 600).
◆ When this television is used as a PC display, 24-bit color is supported (over 16 million colors).
◆ Your PC display screen might appear different depending on the manufacturer (and your particular version of
Windows). Check your PC instruction book for information about connecting your PC to a television.
◆ If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5kHz (horizontal).
In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned
off (or if the PC is disconnected). If so, press the SOURCE button to enter the Video mode. Also, make sure
that the PC is connected.
◆ When connecting a notebook PC to the television, make sure that the PC screen is displayed through only the
television (Otherwise, random signals might appear).
◆ When horizontal synchronous signals seem irregular in PC mode, check PC power saving mode or cable
connections.
English - 55
Setting Up Your Remote Control
This TV’s remote control can operate VCR, CATV , DVD, or
Set-top box (STB), in addition to controlling the TV.
The remote control might not be compatible with all DVD
Players, VCRs and Cable boxes.
➢
VCR
1
2
Turn off your VCR, Cable box, DVD or STB.
Press the SELECT button. Mode is changed whenever SELECT
button is pressed.
3
4
Press the POWER ( ) button on the remote control.
The component you select should turn on. If it turns on, your remote
control is now set correctly.
Once your remote control is set up, press the SELECT button any
time you want to use the remote control to operate your VCR,
Cable box, DVD or STB.
When your remote control is in the VCR, CATV, DVD or
➢
STB mode, the volume buttons still control your television’s
volume.
To program the cable receiver controls:
➢
◆
◆
Press the SELECT button to select CATV.
Point the remote control at the cable receiver and press
the SET button. Then press the company code number(s)
for the component in page 58.
Ex) If the component is manufactured by Oak, press 026.
To program the VCR controls:
➢
➢
◆
◆
Press the SELECT button to select VCR.
Point the remote control at the VCR and press the SET.
button. Then press the company code number(s) for the
component in page 57 or 58.
To program the DVD controls:
◆
◆
Press the SELECT button to select DVD.
Point the remote control at the DVD and press the SET.
button. Then press the company code number(s) for the
component in page 58.
English - 56
Programming the Remote Control for Other Components
VCR Remote Control Codes
Admiral
020
Marantz
Marta
007, 008, 018, 021, 026, 036, 037, 062
Aiwa
025
006
Akai
004, 027, 032
MEI
021
Audio Dynamics
Bell&Howell
Broksonic
Candle
007, 026
Memorex
MGA
006, 021, 024, 025
018
034
022
Midland
005
002, 003, 006, 008, 015, 055
Minolta
019, 041
Canon
021, 056
Mitsubishi
Montgomery Ward
MTC
019, 034, 041, 046
Citizen
002, 003, 006, 008, 015, 055
020
Colortyme
Craig
007
002, 025
002, 024
Multitech
NEC
002, 005, 025, 038
Curtis Mathes
002, 007, 008, 017, 021, 025, 056, 064,
007, 008, 018, 026, 037, 062, 064
066
Optimus
Panasonic
Pentax
020
Daewoo
DBX
003, 010, 011, 012, 013, 014, 015, 016
021, 056, 071, 072
007, 026
019, 041
Dimensia
Dynatech
Emerson
017
Pentex Research
Philco
008
021, 036, 056, 059
021, 036
034
001, 003, 006, 021, 022, 025, 030, 032,
Philips
034, 040, 047, 050, 052, 060, 063, 065,
Pioneer
019, 026, 039, 053
015, 049, 055
066, 067, 069
Portland
PROSCAN
Quartz
Fisher
018, 024, 028, 029, 048, 051, 061
017
Funai
025
018
General Electric
Go Video
002, 005, 017, 021, 056
Quasar
021, 056
002
Radio Shack/Realistic
006, 018, 020, 021, 024, 025, 029,
034, 048, 056
LG (Goldstar)
Harman Kardon
Hitachi
006, 007, 008, 009, 010
007
RCA
002, 017, 019, 021, 035, 041, 043,
057, 068
019, 025, 041, 042
Instant Replay
JC Penney
021
Samsung
Sansui
Sanyo
Scott
000, 001, 002, 003, 004, 005
026
002, 007, 018, 019, 021, 026, 037, 041,
054, 056
018, 024
JVC
007, 008, 018, 021, 026, 037
003, 047, 052, 067
006, 018, 019, 024, 028, 029, 041,
048, 051
Kenwood
KLH
007, 008, 018, 026, 037
Sears
070
Lioyd
025
Sharp
020, 034, 045, 015
027, 033, 038, 058
025
Logik
038
025
Shimom
Signature
Sony
LXI
Magnavox
021, 036, 056, 059
027, 033, 044
English - 57
Programming the Remote Control for Other Components
VCR Remote Control Codes (continued)
Sylvania
Symphonic
Tandy
021, 025, 036, 056, 059
Totevision
Unitech
002, 006
025
002
018, 025
Vector Research
Victor
007, 026
Tashika
Tatung
Teac
006
026
007, 026
037
025, 037, 068
021
Video Concepts
Videosonic
Wards
002
Technics
Teknika
TMK
002, 003, 006, 019, 020, 021, 024, 025,
034, 038, 041
006, 021, 025, 031
066
Yamaha
Zenith
007, 008, 018, 026, 037
023, 027, 033, 073
Toshiba
003, 019, 029, 051, 052
Cable Box (CATV) Remote Control Codes
Anvision
GI
017, 018
041
Regency
SA
015, 023
042, 043
Hamlin
Hitachi
Jerrold
Macom
Magnavox
Oak
003, 024, 031
025, 030
Samsung
Scientific Atlanta
Sprucer
000, 001, 002, 003, 004, 005, 006, 007
042, 043
038, 039
022
025, 030
Stargate 2000
Sylvania
Texscan
Tocom
036
019, 023, 028
026
016
016
032
Panasonic
Philips
Pioneer
RCA
003, 022, 027, 037, 044
019, 021, 023, 028
004, 018, 020, 044
014, 022, 040
003
Universal
Viewstar
Wamer amex
Zenith
033, 034
019, 021, 023, 028
046
Regal
017, 029, 035, 037, 045
DVD Remote Control Codes
Samsung
JVC
000, 001
002
LG (Goldstar)
Sony
006
007
008
009
PROSCAN/RCA
Panasonic
003
Denon
005
Curtis Mathes
English - 58
Replacing the Lamp
1
Unplug TV, then use a screwdriver to remove the screw.
Remove the Lamp cover.
2
3
4
Remove the screws securing the Lamp by using a screwdriver.
Separate the Lamp from the engine by holding the handle and
pulling it out
5
To reinstall the Lamp, follow these steps in reverse order.
◆ Why do I need to replace the lamp?
The lamp used in a projection TV has a limited lifespan. For
the best screen quality it needs to be replaced
periodically. After replacing the lamp, the screen quality will
be bright and clear as new.
◆
When do I need to replace it?
It should be replaced when the screen becomes darker, less
clear or when all three LEDs on the front (TIMER, LAMP and
STAND BY/TEMP) are flashing.
◆ Check before lamp replacement
-
Turn the power off and wait for 30 minutes before
replacing the lamp as it will be hot.
-
The lamp must be the same code to avoid damage to the
TV. The lamp code is indicated on the lamp case or the
side of TV.
-
After checking the lamp code, give to the store where you
purchased the TV or to a Samsung Service Center.
◆
Caution
-
Do not touch the glass part of the lamp with your bare
hands nor insert any foreign object inside the cover as it
may cause poor screen quality, electric shock or fire.
Do not place the old lamp near flammable objects or
within the reach of children.
Don't allow dirt or dust to accumulate inside the lamp
cover or on the lamp. A dirty cover or lamp can catch fire,
explode and cause electric shock.
-
-
-
-
If a new lamp is improperly handled, the screen quality
can be affected and the expected lifespan of the lamp can
be reduced.
Be sure to tighten the lamp cover on the TV after changing
the lamp. Note that the TV will not function if the lamp
cover is not securely attached. Please tighten the holding
screw on the lamp cover after it has been attached to the
TV.
English - 59
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
◆
◆
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the power switch toward “OFF” (O)
or the POWER ( ) button on the remote control or the front of the
television).
◆
◆
Check the picture contrast and brightness settings.
Check the volume.
Normal picture but no sound
◆
◆
Check the volume.
Check whether the volume MUTE button on the remote control has
been pressed.
◆
Check that the Internal Muteis set to On.
No picture or black and white picture
Sound and picture interference
◆
◆
Adjust the color settings.
Check that the broadcast system selected is correct.
◆
◆
◆
Try to identify the electrical appliance that is affecting the television,
then move it further away.
Plug your television into a different mains socket.
Blurred or snowy picture,
distorted sound
Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
◆
◆
◆
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
English - 60
Technical Specifications
The descriptions and characteristics in this booklet are given for information purposes only and are
subject to modification without notice.
Model name
SP42L6HX
SP46L6HX
SP50L6HX
SP56L6HX
SP61L6HX
SP67L6HX
Color systems
TV standards
PAL, SECAM, NTSC3.58, NTSC4.43
BG, DK, I, M
Audio output power
15 W + 15 W
Demensions
(W x D x H)
999 x 331.3 x 755.5 mm 1088 x 342.5 x 814.2 mm 1182 x 354 x 869.7 mm 1330 x 388.5 x 961.7 mm 1446 x 466.5 x 1056.2 mm 1584 x 502.5 x 1144.5 mm
Weight
28 kg
30.3 kg
33 kg
36.7 kg
42.9 kg
49 kg
Checking Parts
Sold Separately
Replacement Lamp
Owner’s Instructions
For purchasing a replacement lamp, ask at a
nearby service center.
Remote Control/
AAA Batteries
•
Use authorized lamps only. The company
cannot guarantee the quality of the product if
an unauthorized lamp is used.
When installing the product, make sure to keep
it away from the wall (more than 10cm) for
ventilation purposes.
➢
• Poor ventilation may cause an increase
in the internal temperature of the product,
resulting in a shortened component life
and degraded performance.
English - 61
Memo
English - 62
Memo
English - 63
-
AFTER SALES SERVICE
-
Do not hesitate to contact your retailer or service agent
if a change in the performance of your product indicates
that a faulty condition may be present.
ELECTRONICS
BP68-00478E-00
|