Samsung Cell Phone SGH T528G User Manual

SGH-T528G  
M O B I L E  
P H O N E  
User Manual  
Please read this manual before operating your  
phone, and keep it for future reference.  
GH68-32644A  
Printed in China  
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat.  
5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and other patents pending.  
®
ACCESS and NetFront™ are trademarks or registered trademarks of ACCESS Co.,  
Ltd. in Japan and other countries.  
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination  
mark (Bluetooth word mark and “B Design”) are registered trademarks and are  
wholly owned by the Bluetooth SIG.  
microSD™ and the microSD logo are Trademarks of the SD Card Association.  
®
Openwave is a registered Trademark of Openwave, Inc.  
and  
are trademarks of SRS Labs, Inc. CS Headphone and WOW  
HD technologies are incorporated under license from SRS Labs, Inc.  
Open Source Software  
Some software components of this product incorporate source code covered under  
GNU General Public License (GPL), GNU Lesser General Public License (LGPL),  
OpenSSL License, BSD License and other open source licenses. To obtain the  
source code covered under the open source licenses, please visit:  
.
SAR Information  
Your wireless phone is a radio transmitter and receiver. It is designed and  
manufactured not to exceed the emission limits for exposure to radio frequency (RF)  
energy set by the Federal Communications Commission (FCC) of the U.S.  
Government. These limits are part of comprehensive guidelines and establish  
permitted levels of RF energy for the general population. The guidelines are based  
on the safety standards that were developed by independent scientific organizations  
through periodic evaluation of scientific studies.  
The standards include a substantial safety margin designed to assure the safety of  
all persons, regardless of age and health.  
The exposure standard for wireless phones employs a unit of measurement known  
as Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6 W/kg. The  
highest SAR values for this model phone were Head: 0.62 W/kg,  
Body-worn: 1.08 W/kg.  
Disclaimer of Warranties; Exclusion of Liability  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE  
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE  
PRODUCT “AS IS”, AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF  
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT  
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE  
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE  
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE  
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR  
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION  
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY  
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,  
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING  
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH  
OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR  
CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.  
TracFone_T528G_UDKA8_MM_012711_F6  
Data Counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Options During a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Section 4: Entering Text ......................................................41  
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Using the QWERTY Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
1
Using Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89  
Using Exchange Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89  
Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90  
Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90  
2
Other Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115  
Used Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115  
Section 12: Tools ...............................................................116  
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116  
3
Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124  
World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125  
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126  
Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127  
4
Section 1: Getting Started  
This section explains how to start using your phone by charging your battery, setting  
up your voice mail and installing a memory card.  
Setting Up Your Phone  
SIM Card  
Your phone comes with a pre-installed SIM card.  
Removing the Battery Cover  
PWR  
END  
1. If the phone is turned on, press and hold  
until the phone turns off.  
2. Remove the battery cover by placing your thumbnail into the slot at the  
bottom of the phone (1). If you have fragile nails, use a pointed object.  
3. Lift the cover up and off the phone (2).  
Getting Started  
5
   
Installing the Battery  
1. Insert the battery into the opening on the back of the phone, making sure the  
gold contacts align (1).  
2. Gently press down to secure the battery (2).  
Note: Make sure the battery is properly installed before switching on the phone.  
Replacing the Battery Cover  
1. Place the battery cover on the back of the phone and press down (1).  
2. Press down on the bottom of the phone (2) until you hear a light click.  
6
Charging the Battery  
Your phone is powered by a rechargeable Li-ion battery. The Travel Adapter used to  
charge the battery is included with your phone. Use only Samsung-approved  
batteries and chargers.  
Note: Before using your phone for the first time, you must fully charge the battery. A discharged  
battery requires approximately 4 hours to recharge fully.  
Although you can use the phone while the battery is charging, doing so requires  
additional charging time.  
Long backlight settings, searching for service, vibrate mode, browser use, and other  
variables may reduce the battery’s talk and standby times.  
Using the Travel Adapter  
1. With the battery installed, lift and rotate the plastic cover of the Power/  
Accessory Interface connector at the top of the phone.  
Important!: Verify that the battery is properly installed prior to connection. If the battery is not  
properly installed and the wall charger is connected, the handset may power off and on  
continuously, preventing proper operation.  
Correct  
Incorrect  
2. Plug the travel adapter connector into the jack on your phone.  
Getting Started  
7
 
3. Plug the travel adapter power plug into a standard AC wall outlet.  
4. When the battery is fully charged, the phone displays a message telling you  
the battery is full. Remove the connector from the phone.  
Note: Failure to unplug the wall charger before you remove the battery can cause damage to the  
phone.  
Warning!: If your handset has a touch screen display, please note that a touch screen responds  
best to a light touch from the pad of your finger. Using excessive force when pressing on  
the touch screen may damage the tempered glass surface and void the warranty.  
Low Battery Indicator  
When the battery is weak and only a few minutes of talk time remain, the battery  
icon (  
) blinks and the device sounds a warning tone at regular intervals. In  
this condition, your phone conserves its remaining battery power, not by turning off  
the backlight, but by entering the dimming mode. For a quick check of your battery  
level, glance at the battery charge indicator located in the upper-right corner of your  
device’s display. Five bars (  
) indicate a full charge.  
When the battery level becomes too low, the phone automatically turns off.  
Switching the Phone On or Off  
PWR  
END  
1. To turn on, press and hold  
until the phone switches on. The phone  
launches the activation splash screen and searches for the network. Once the  
network is found, you can make or receive calls.  
PWR  
END  
2. To turn off, press and hold  
until the phone switches off.  
Locking the Touch Screen  
1. Press the Lock Key  
on the upper right side of the phone to lock the  
touch screen.  
8
   
2. Press and hold the Lock Key  
to unlock the touch screen.  
– or –  
Touch and hold  
on the Idle screen to unlock the touch screen.  
Setting Up Voice Mail  
1. In Idle mode, press  
, then touch and hold  
.
You may be prompted to enter a password.  
Note: You can also access your voicemail from the on-screen keypad by touching  
then  
SEND  
pressing  
or touch Call.  
2. Follow the tutorial to create a password, record a greeting, and record your  
name.  
Note: These steps may be different depending on your network.  
Accessing Voice Mail  
1. In Idle mode, press  
, then touch and hold  
.
2. When connected, follow the voice prompts from the voice mail center.  
Accessing Voice Mail From Another Phone  
1. Dial your wireless phone number.  
2. When you hear your voicemail greeting, press  
(the asterisk key on the  
phone you are using).  
3. Enter your passcode using the on-screen keypad.  
Getting Started  
9
 
Installing the Memory Card  
Your phone also supports the use of a memory card (microSD™) for storage of  
data, music, pictures, and video files. Your phone supports up to a 16 GB memory  
card.  
Push the microSD card into the slot until it clicks.  
Note: Make sure the microSD gold contact pins are oriented as shown and the card is securely  
inserted.  
10  
 
Section 2: Understanding Your Phone  
Thissectionoutlinessomekeyfeaturesofyourphone.Italsodescribesthescreenand  
the icons that appear when the phone is in use.  
Features  
Your phone is lightweight and easy to use, and it offers many useful features. The  
following list outlines a few of the features included in your phone.  
Touch screen with menu driven access to features and options  
Widgets  
®
Bluetooth Wireless Technology  
Camera/Camcorder  
Mobile Email  
Browser  
TM  
Memory Card slot for optional microSD card  
Tools feature provides access to Camera, Music Player, Voice recognition, Record Audio,  
Alarms, Calendar, Recent Calls, Memo, Tasks, Calculator, Tip Calculator, Converter,  
World Clock, Timer and Stopwatch.  
Understanding Your Phone  
11  
   
Front View  
1
2
3
4
5
9
8
PWR  
SEND  
6
7
END  
1. External speaker: allows you to hear the caller.  
2. Display: shows the information needed to operate your phone, such as the  
received signal strength, phone battery level, time, and so on.  
3. Widget tab: allows you to open the Widget toolbar.  
4. Contacts key: allows you to access your current Contacts, Groups, and  
Favorites lists.  
5. Dial key: allows you to access the Phone Functions menu, such as Dialer,  
Contacts, and Create message screen.  
12  
 
6. Talk/Send key: allows you to power on the phone, make or answer a call,  
and access your call history, Call Manager, and Block Caller features. Press  
and hold to redial the last phone number.  
7. Back key: allows you to return to the previous menu while in menu mode.  
While in the Web browser, allows you to return to the previous page. In Idle  
mode, allows you to launch the Prepaid menu.  
8. Power/End key: ends a call. Press and hold to turn the phone on or off. While  
in a menu, pressing this key once cancels the current input and twice returns  
the phone to Idle mode.  
9. Menu key: allows you to access your phone menus and widgets in Idle mode.  
While in the Menu screen, the Menu key is replaced with the Message key. The  
Message key allows you to create new text or multimedia messages.  
Understanding Your Phone  
13  
Side Views  
6
5
1
2
4
3
1. Volume key: (  
) allows you to adjust the ringer volume while in  
standby mode or adjust the voice volume during a call. When receiving an  
incoming call, briefly press down either end of the volume key to mute the  
ring tone. Press and hold either end of the volume key to reject the call and  
send it directly to voicemail. Adjusts text size when reading a message or  
using the browser in the Applications folder.  
2. Memory Card Slot: allows you to plug in an optional microSD memory card  
for additional multimedia file storage.  
3. Microphone: allows other callers to hear you when you are speaking to them.  
14  
 
4. Camera/Camcorder key: (  
) allows you to take pictures or videos when  
you are in camera or camcorder mode. In Idle mode, press to launch the  
5. Lock key: (  
) lets you lock or unlock the touch screen. For more  
information on locking your phone, see “Locking and Unlocking the Phone”  
on page 19.  
6. Power/Accessory Interface connector: allows you to connect a Travel  
Charger or other optional accessories such as a USB/data cable or a hands-  
free headset.  
Rear View  
1
2
1. Camera lens: is used to take pictures and shoot videos.  
2. External speaker: allows you to hear when the Speakerphone is turned on.  
Understanding Your Phone  
15  
 
Display Layout  
Your display screen provides a wealth of information about phone status and  
options, as well as providing access to the Widget List. For more information about  
the Widget List, see “Widgets” on page 23.  
The display has four main areas:  
Indicators  
Widget List  
Main Display  
Area  
Function  
Categories  
Function Categories  
Function categories are shortcuts to Dial for dialing a number, Contacts for  
accessing the contacts list, and Menu for displaying the icons for application and  
folder access. While viewing the Main Menus, the Menu category changes to  
Message, which can be used to view and create messages.  
16  
 
Icons  
This list identifies the icons that appear in your phone display and Indicator area:  
Displays your current signal strength. The greater the  
number of bars, the stronger the signal.  
Indicates that the Airplane Mode is active. You cannot  
send or receive any calls or access online information.  
Displays when you are out of your service area.  
Displays when a call is in progress.  
Displays within the lock screen when a call has been  
missed.  
Displaysyourbattery’schargelevel.Themorebarsyou  
see, the more power you have remaining.  
Displays when your connection to a 3G network is  
active.  
Displays when an internal microSD memory card is  
detected.  
Displays when the phone is connected to a computer  
with a supported USB cable connection.  
Displays within the Indicators area when a new text  
message is received.  
Understanding Your Phone  
17  
 
Displays within the Indicators area when a new email  
message is received.  
Displays within the Indicators area when a new  
multimedia message is received.  
Displays within the Indicators area when a new voice  
mail is received.  
Displays within the Indicators area when a new WAP  
message is received.  
Displays when you set an alarm to ring at a specified  
time. For more information, refer to “Alarms” on  
page 119.  
Displays when the Sound profile is set to Normal.  
Displays when Silent Mode is activated.  
Displays when the Sound profile is set to Driving.  
Displays when the Sound profile is set to Outdoor.  
Displays when Bluetooth is activated.  
18  
Displays when a Bluetooth stereo headset has been  
paired with the phone.  
Displays when a TTY device has been inserted.  
Displays when your Address Book is synchronizing  
with the Address Book, the network backup service.  
Menu Navigation  
This section explains the menu navigation for your phone.  
Touching an on-screen option activates the feature.  
Menu lists can be viewed by using your fingertip to scroll up or down the on-screen list or  
by pressing the volume key up or down.  
Locking and Unlocking the Phone  
When your phone is locked, there are two ways to unlock your phone:  
Press and hold the Lock Key  
Touch and hold on the Idle screen.  
located on the upper right side of your phone.  
Understanding Your Phone  
19  
   
Navigating Through the Main Menus  
Your phone originally has three main menus. Some icons can be deleted and  
replaced with new icons.  
1. From the Idle screen, touch  
. Main Menu 1 is displayed.  
Menu  
2. Drag your finger across the Main Menus to scroll through the three Main  
Menus. You can scroll in either direction.  
PWR  
SEND  
END  
The icons initially contained in the three Main Menus are shown below.  
20  
Opening an Application  
Tap the associated on-screen icon.  
Press  
Press  
the Idle screen.  
to exit from the current menu and return to the previous screen.  
PWR  
END  
to exit from the current location or function, cancel your input, and return to  
Navigating Through Menus  
As you navigate through a menu, options display on the screen as scrollable lists.  
Function categories, located at the bottom of most screens, provide access to  
additional screen options.  
To navigate a scrollable list:  
1. From the Idle screen, touch  
.
Menu  
2. Scroll through the main menus and press an icon to make your selection.  
3. You can perform the following operations:  
Touch an on-screen entry field to activate it.  
Firmly press and slide your finger up or down the screen to scroll through lists of menu  
items.  
Navigate through a long list by pressing the volume key up or down.  
Scrolling Through Field Entries  
Some screens ask you to assign a value to an on-screen field by either touching the  
up or down selection arrows or by quickly sliding through these values by using  
your fingertip. An example of these actions can be found on the Alarm page.  
1. Touch  
Tools  
2. Touch the Alarm Time field and use the Keypad mode to adjust the Hour  
Minute, and AM PM values manually or the Wheel mode by using the  
or (down) buttons or by quickly sweeping your fingertip over the numbers.  
Alarms  
Create Alarm.  
Menu  
,
/
+
(up)  
-
Understanding Your Phone  
21  
 
Menu Navigation Notation  
The following notation shows an example of a statement used in this manual to  
direct you to a menu, submenu or menu item.  
In Idle mode, touch  
My folders Tools Calendar.  
Menu  
This notation directs you to perform the following operations:  
Touch the Menu soft key.  
Touch the My folders icon.  
Scroll to and touch Tools in the My folders menu.  
Scroll to and touch Calendar in the Tools menu.  
According to the selections you make, soft keys display to provide more options:  
Touch More Calendar Settings View by.  
This notation directs you to perform the following operations:  
Touch the More soft key.  
Scroll to and touch Calendar Settings in the list of options.  
Scroll to View by in the Calendar Settings list.  
22  
Widgets  
A Widget List is located on the left of the Idle screen providing access to the  
following programs: Widget Setting, Analog Clock, Digital Clock, Dual Clock, Create  
Message, Buddy List, Voice Recognition, Browser, Today, Calendar, Pictures,  
Games, Widget Memo 1, 2, and 3, Message Inbox, Record Audio, Memo, Timer, Go  
on a Diet, Birthday, Sound Profile, Bluetooth, Calculator, Video, Google Search, AP  
Mobile, MySpace, Facebook, Twitter, Samsung Apps and AccuWeather.com.  
Widget  
List  
You can customize the Widget List by keeping the widgets docked in the list or by  
dragging them anywhere on the Idle screen.  
Displaying and Hiding Widgets  
To select the items that are displayed or hidden in the Widget List:  
1. From Idle mode, touch the Widget List to open it.  
2. Touch  
to display the Widget menu.  
Understanding Your Phone  
23  
   
3. Touch the box to place a check mark next to each Widget you want to display.  
– or –  
Touch the box to remove the check mark from Widgets you want to hide.  
The following table contains descriptions of available Widgets.  
Widget Manager: allows you to choose which  
widgets to display on the Widget List.  
Analog Clock: displays the current time on an  
analog clock.  
Digital Clock: displays the current time on a digital  
clock.  
07:27P  
Dual Clock: displays current time in other user-  
zone1  
defined international locations.  
zone2  
For more information, refer to “World Clock” on  
page 125.  
Music Player: allows you to play music files stored  
on the phone and external card and control the  
playback.  
Create Message: allows you to create new text or  
picture messages. For more information, refer to  
“Creating and Sending Messages” on page 84.  
24  
Buddy List: displays the Favorites list. You can use  
thepull-downContactsmenutoselectallContacts  
and Groups.  
Drag and drop the Buddy List onto the desktop  
to view the contacts by Favorites, Groups, or  
by all Contacts. These favorites are listed and  
can be edited in Address Book  
Favorites.  
Voice Recognition: allows you to use your voice to  
dial, look up contacts, launch applications, and  
navigate phone menus. Follow the on-screen  
tutorial.  
Browser: opens the Mobile Web home page.  
Today: displays the current date (month/day/year).  
Monday  
9 Jan 2009  
Calendar: allows you to access the Calendar  
feature.  
With the Calendar feature, you can:  
Consult the calendar by month, week, or day.  
Set schedules and note anniversaries.  
Write memos to keep track of your schedule.  
Set an alarm to act as a reminder.  
Pictures: allows you to view the list of photos  
downloaded from the web server, received in  
messages, or taken by the camera. You can assign  
an image as wallpaper.  
Understanding Your Phone  
25  
Games: allows you to access your Games folder.  
Widget Memo 1: allows you to write a short memo  
to keep on your Widget List or main display. The  
Widget Memo is limited to 80 characters.  
Widget Memo 2: allows you to write a short memo  
to keep on your Widget List or main display. The  
Widget Memo is limited to 80 characters.  
Widget Memo 3: allows you to write a short memo  
to keep on your Widget List or main display. The  
Widget Memo is limited to 80 characters.  
Message Inbox: allows you to access your inbox.  
Record Audio: allows you to record voice memos.  
Memo: allows you to access the Memo feature.  
Timer: allows you to access your Timer.  
GoonaDiet:allowsyoutoseehowmanydayshave  
pasted since starting a diet. Touch the icon and  
touch Start to start keeping track of days.  
26  
Birthday: displays an on-screen alert for up to 5  
upcoming birthdays, according to information  
entered in the Address Book for a contact birthday.  
Sound Profile: allows you to quickly modify your  
current sound profile.  
Bluetooth: From this application you can activate  
Bluetooth and configure it so other Bluetooth  
devices can see your device by name.  
Calculator: allows you to use the built-in calculator.  
Video: allows you to play videos stored on  
the phone.  
Google Search: allows you to perform Google  
searches on the Mobile Web.  
AP Mobile: provides access to international,  
national and local news.  
MySpace: allows you to sign up for an account and  
to create and customize your profile with photos,  
videos.  
Facebook: allows you to sign up for an account and  
to create and customize your profile with photos,  
videos.  
Understanding Your Phone  
27  
Twitter: allows you to sign up for an account and to  
create and customize your profile with photos,  
videos.  
Samsung Apps.: allows you to access Samsung  
Apps.  
AccuWeather.com: allows you to access  
AccuWeather.com using your browser.  
Widget List Navigation  
You can drag the widgets to any of the three Idle screens to use the application or  
feature, then drag it back to the Widget List when you are finished. There are three  
different widget Idle screens you can use. You can have different widgets on all  
three Idle screens.  
Accessing the Widget List  
1. Tap the Widget List tab, located on the left side of the main display, to open  
the Widget (quick access) Bar.  
2. Tap the Widget List tab or anywhere on the Idle screen to close the Widget  
List.  
Undocking Widgets  
You can easily customize the Widget List by either keeping these mini-apps docked  
within the bar itself or undocking them by dragging onto your Main display screen.  
1. Touch and hold the widget.  
2. While still holding the icon, in a single motion, drag it over to the new location  
and release your finger from the screen. The application is now located on  
the Idle screen.  
28  
 
Note: You can drag a widget to a location of your choice on the Idle screen or just touch the widget  
on the Widget List and it displays in the center of the Idle screen.  
Rearranging Widgets  
You can customize the Widget List by moving the widgets. You can place your  
frequently used widgets at the top of the list.  
1. Touch and hold the widget.  
2. While still holding the icon, drag it away from the Widget List and drop it on  
the main screen. Then drag it back into its new location in the list.  
Activating a Widget  
1. Locate your widget. If the widget is on the Widget List, touch it to move it to  
an Idle screen.  
2. Touch the icon to activate the mini-application (widget).  
Scrolling Through the Widget List  
Although the Widget List contains a number of widgets, it can only display six  
widget icons at one time on the bar.  
Use your fingertip to scroll up and down along the Widget List.  
Understanding Your Phone  
29  
Accessing Multiple Widget Idle Screens  
Drag your finger along the three bars at the top of the Idle screen to scroll  
through the three widget Idle screens. You can scroll in either direction.  
PWR  
PWR  
SEND  
SEND  
SEN
END  
END  
Understanding the Events Widget  
The Event Widget is an area that displays on the screen to inform you of calendar  
events, missed calls, or when new messages have been sent to the phone.  
214-555-8374  
30  
 
The following is a description of these on-screen notification tabs:  
Displays when the Event Widget is parked on the  
Widget List.  
Displays as a tab within the Event Widget when a call  
has been missed.  
Displays as a tab within the Event Widget when a new  
voice mail message is received.  
Displays as a tab within the Event Widget when a new  
message is received.  
Displays as a tab within the Event Widget when a new  
chat message is received.  
Displays as a tab within the Event Widget when a new  
email message is received.  
Displays as a tab within the Event Widget when a  
scheduled event has been missed.  
Note: When you drag the Event Widget to the Idle screen, it will remain there until you drag it back  
to the Widget List. When the Event Widget automatically appears on the Idle screen after an  
event has taken place, it will automatically return to the Widget List after you have confirmed  
PWR  
END  
the event or pressed  
.
Understanding Your Phone  
31  
Section 3: Call Functions  
This section describes how to make or answer a call.  
Displaying Your Phone Number  
Touch  
Settings  
Calls  
General  
Show My Number  
Menu  
Show Number  
.
Making a Call  
1. From the Idle screen, touch  
and use the on-screen keypad to enter the  
number you want to dial.  
2. Touch  
Note: When you activate the Auto Redial option in the Voice Call menu, the phone automatically  
redials up to 10 times when the person does not answer the call or is already on the phone.  
For more information, refer to “Call Settings” on page 98.  
Making an International Call  
1. Touch  
, then touch and hold  
. The + character appears.  
2. Use the on-screen keypad to enter the country code, area code, and  
phone number.  
If you make a mistake, touch  
until the desired numbers have been deleted.  
SEND  
Call  
3. Touch  
or press  
.
Manual Pause Dialing  
To manually call a number with pause(s) without storing it in your Contacts list:  
1. Touch and use the on-screen keypad to enter the phone number.  
2. Press and hold  
to add a two-second pause. Use the keypad to enter  
the additional numbers.  
32  
     
Tip: You can create pauses longer than two seconds by entering multiple P pauses.  
SEND  
Call  
3. Touch  
or press  
.
Correcting an Entered Number  
Use the following steps to correct an entry when dialing.  
Touch  
to delete the previous character entered.  
Ending a Call  
PWR  
END  
Press the  
key to end a call.  
Dialing a Recent Number  
All incoming, outgoing, and missed calls are recorded in the Calls menu. If  
the number or caller is listed in your Address Book, the associated name is  
also displayed.  
SEND  
1. From the Idle Screen, briefly press  
.
2. Find the number by touching the drop down arrow to the right to view the call  
logs from the various options screens. Choose from: All, Missed, Made  
and Received  
.
3. Touch  
next to the desired phone number or entry name, if already in  
your Address Book.  
– or –  
SEND  
Select the log to enter the Details page, then touch Call or press  
to dial  
the number.  
Call Functions  
33  
Making a Call from the Address Book  
You can store phone numbers that you use regularly on the SIM card or in the  
phone’s memory. These entries are collectively called the Address Book.  
Answering a Call  
When a call is received the phone rings and displays the caller’s phone number or  
name, if stored in the Address Book.  
1. At the incoming call screen, press and hold Accept to answer the call.  
– or –  
SEND  
Press  
to answer the call.  
If the Any Key option is activated (Menu  
Settings  
Calls  
General  
Call  
PWR  
Answer), you can press any key to answer a call except  
.
END  
2. Touch and hold Reject to reject the call and send it to your Voice Mail.  
3. Touch and hold Reject + Msg to reject the call, send it to your Voice Mail, and  
create a message to send the caller. There are also prepared messages you  
can choose and quickly send to the caller.  
PWR  
END  
4. Press  
to end the call.  
Note: You can answer a call while using the Address Book or any other menu feature. After ending  
the call, the phone returns to the previously active function screen.  
Other Answering Options  
When receiving an incoming call, press and hold either end of the volume key to  
reject the call and send it directly to Voice Mail.  
34  
   
Dialing Options  
From the Idle screen and Main menu, you have the option to access the Dialer and  
initiate a call by touching  
. When you manually enter numbers from the on-  
screen keypad, you see three icons displayed on the bottom of the screen.  
Call: Press Call to dial the current number entered  
using the on-screen keypad.  
Call  
More: displays a menu of options: Send Message and  
Save to Address Book. Press Send Message to create  
More  
a new text message and address it to the manually  
enterednumber. PressSavetoAddressBook toaddor  
update an Address Book entry.  
Delete key: after entering a number, touch to erase a  
single character or press and hold to erase the entire  
string of numbers.  
After you start entering numbers, possible contact names and numbers appear in a  
box under the number. If the number you intend to enter displays, touch the box to  
complete the number automatically.  
Recent Calls  
The phone stores the numbers of the calls you have dialed, received, or missed in  
the Calls menu. You can access this menu by from the Idle screen by doing one of  
the following:  
SEND  
1. Briefly press  
.
– or –  
Touch  
Tools  
Recent Calls.  
Menu  
Call Functions  
35  
     
2. Touch the drop-down list located at the top right of the screen to select from  
All Missed Made and Received. If the number or caller is listed in your  
,
,
Address Book, the associated name is displayed.  
You can select a recent call to view details, return the call, save to your address  
book, send a message or delete the call.  
Call Time  
The Call Time menu shows the call time for the following: Last Call Duration, Total  
Dialed, Dialed Voice Calls, Dialed Data Calls, Total Received, Received Voice Calls,  
Received Data Calls and Total Call Duration. After reviewing you can select Reset  
All.  
Touch  
Tools  
Recent Calls  
Call Manager Call Time.  
Menu  
Data Counter  
Data counter refers to the amount of data (volume) to and from the phone. The  
following data items are displayed: Last Sent, Last Received, Total Sent and Total  
Received. Touch Reset to set these counters back to zero.  
Touch  
Tools  
Recent Calls  
Call Manager Data Counter.  
Menu  
Options During a Call  
Your phone provides a number of control functions that you can use during a call.  
Adjusting the Call Volume  
During a call, to adjust the earpiece volume, use the Volume key on the left side of  
the phone.  
Press Up (top area of the volume key) to increase the volume level and press  
Down (bottom area of the volume key) to decrease the volume level.  
In Idle mode, press the Volume key Up or Down to adjust the ringer volume.  
36  
     
In-Call Options  
During an active call there are several functions available by touching a  
corresponding on-screen button.  
Speaker On/Off: routes the phone audio through either the speaker or through  
the earpiece.  
Slide Speaker to On to route the audio through the speaker. (You can adjust the speaker  
volume using the volume key.)  
Slide Speaker to Off to use the phone’s earpiece (see “Using the Speakerphone During  
an Active Call” on page 38.)  
Mute/Unmute: turns the onboard microphone either on or off.  
Touch and hold the on-screen Mute button during a call to mute the microphone.  
Touch and hold the on-screen Unmute button during a call to unmute the microphone.  
Dial: to display the on-screen keypad where you can choose to initiate a New call or display  
your Contacts  
Hold/Resume: to place the current active call on hold or to resume the call after it has been  
placed on hold.  
More: to access additional in-call options such as:  
Address Book: to display your current Address Book entries.  
Save to Address Book: to save the current phone number into your Address Book if it is not  
already saved.  
Send Message  
:
to send a new text message.  
Memo to write a memo concerning this call.  
:
Placing a Call on Hold  
You can place the current call on hold at any point during a conversation. You can  
also make another call while you have a call in progress, if your network supports  
this service.  
Hold  
1. While on a call, touch  
and displays Held  
2. You can later reactivate this call by touching  
. This action places the current caller on hold  
.
Resume  
.
Call Functions  
37  
To make a new call while you have a call in progress  
Hold  
1. Touch  
.
More  
Dial  
2. Touch  
– or –  
Address Book to look up a number in the Address Book.  
Call  
Touch  
enter the new number ➔  
.
SEND  
3. Press  
to dial the second number. Once connected, each call is displayed  
within either an In Call or On Hold tab. The caller currently on hold appears  
within the On Hold tab.  
Switching Between Calls  
When you have an active call and a call on hold, you can switch between the  
PWR  
END  
Swap  
two calls by touching  
active call.  
. Press  
when you are ready to end the  
Using the Speakerphone During an Active Call  
While in an active call, you can activate the speakerphone by sliding the Speaker on  
bar to the right.  
1. Use the Volume key (located on the left side of your phone) to adjust  
the volume.  
2. To deactivate the speakerphone, slide the Speaker off bar to the left.  
Switching Off the Microphone (Mute)  
You can temporarily switch your phone microphone off, so that the other person  
cannot hear you.  
38  
 
Call Waiting  
The Call Waiting feature allows you to answer an incoming call while you have a  
call in progress, if this service is supported by the network, and you have set the  
Settings Call  
s
Voice Call  
Call Waiting menu to Activated. You are  
Menu  
notified of an incoming call by a call waiting tone.  
To answer a call while you have a call in progress  
SEND  
1. Touch and hold Accept or  
to answer the next incoming call. The first call  
is automatically put on hold.  
2. To switch between the two calls, touch Swap, which places the current call  
on hold and then activates the previous call.  
To end a call on hold  
1. Touch the On Hold tab and touch  
adjacent to the caller you want to  
disconnect.  
PWR  
END  
2. Press  
to end the current active call.  
3-Way Calling (Multi-Party Calling)  
The 3-Way or Multi-Party feature allows you to answer a series of incoming calls  
and place them on hold.  
If this service is supported by the network, and the SIM has the feature enabled, all  
calls can be joined together. You are notified of an incoming call by a call waiting  
tone. To activate the call waiting feature, see “Call Waiting” on page 39.  
SEND  
1. Press  
or Accept to answer the first incoming call.  
SEND  
2. Press  
or Accept to answer the next incoming call. The first call is  
automatically put on hold.  
Call Functions  
39  
 
SEND  
3. Press  
to join with both of your callers, the active call and the  
call on hold, in a single multi-party call.  
PWR  
END  
4. Press  
to end the call.  
40  
Section 4: Entering Text  
This section outlines how to select the desired text input mode when entering  
characters into your phone. This section also describes how to use the T9 predictive  
text entry system to reduce the number of key strokes associated with entering text.  
Your phone comes equipped with an orientation detector that can tell if the phone is  
being held in an upright (portrait) or sideways (landscape) orientation. This is useful  
when entering text. If the phone is sideways, an on-screen, QWERTY keypad is  
displayed. When upright, the alphanumeric keypad is displayed.  
Keys  
You can enter characters into your phone by using an on-screen portrait keypad or a  
landscape QWERTY keypad. Depending on which format you use, the keys are  
associated with different letters, special characters, or numbers. Refer to the  
following layouts to determine which keys are associated with letters, special  
characters, or numbers.  
Create New Message  
Portrait Keypad  
Entering Text  
41  
     
From a screen where you can enter text, rotate your phone counterclockwise to a  
Landscape orientation and the on-screen QWERTY keypad displays.  
Create New Message  
Landscape Keypad  
By default, the first letter of an entry is capitalized and all consecutive letters are  
kept in lowercase unless you touch the Shift key. After entering a character, the  
cursor automatically advances to the next space after two seconds or when you  
enter a character on a different key.  
Using the QWERTY Keypad  
This phone also offers the convenience of an on-screen QWERTY keypad. Using the  
QWERTY keypad to type letters, numbers, punctuation, and other special characters  
into text entry fields or other applications should be simpler and faster than using  
the portrait keypad.  
1
2
3
4
5
6
7
42  
 
The following keys perform special functions when entering text:  
1. Shift: Press to switch between uppercase and lowercase characters.  
2. 123Sym: Press once to type special characters and numbers that appear on  
the QWERTY keys. Examples: $, @, #, !, 1, 2. Press again to deactivate this  
1/2  
function. Touch either  
additional keys.  
or  
on the  
button to cycle through  
3. T9: Press to activate the T9 mode in either abc (all lower case) or  
(where the keys default to lowercase until the Shift key is touched  
[activated]). This is achieved by repeatedly pressing the button to toggle the  
current state.  
Note: The EMO option is available only when 123Sym mode has been selected.  
EMO: Press to display Emoticons. Touch a character on the screen. After all  
characters have been selected, press OK Abc, or 123Sym.  
,
4. Space: Press to insert an empty space. Press twice to insert a period and a  
space to begin a new sentence.  
5. Enter: Press to move the insertion point to the next line in a message.  
6. OK: Press to accept the choices offered when navigating through a menu.  
7. Backspace: Press to delete the previous character, similar to the backspace  
key on a computer keyboard.  
The keypad provides keys labeled with alphabetic characters. Touch the key  
corresponding to the character you want to enter.  
Entering Text  
43  
Changing the Text Input Mode  
To enter text when storing a name in your Address Book, creating your personal  
greeting or scheduling events on your calendar, you can enter alphanumeric  
characters by using your phone keypad in portrait mode or in qwerty mode. Tape  
the text entry screen to display the on-screen keypad.  
Your phone has the following text input modes:  
T9 Abc: allows you to enter words with only one keystroke per letter. The T9 mode  
automatically compares the series of keystrokes you make with an internal linguistic  
dictionary to determine the most likely word, thus requiring fewer keystrokes than the  
traditional Abc mode.  
T9 ABC: allows you to enter all capital alpha characters in T9 mode.  
T9 abc: allows you to enter lower case alpha characters in T9 mode.  
Abc: allows you to enter initial caps alpha characters.  
ABC: allows you to enter alpha characters in all caps.  
abc: allows you to enter lower case alpha characters.  
Numeric: allows you to enter numbers.  
Symbols: allows you to enter symbols, such as punctuation marks.  
Emoticons: allows you to enter Emoticons.  
Note: When characters can be entered in a field, the text input mode indicator displays on the top  
right portion of the screen.  
Using T9 Mode  
T9 is a predictive text input mode that allows you to key in any character using  
single keystrokes. This text input mode is based on a built-in dictionary.  
To enter a word in T9 mode while in Portrait Mode:  
1. Start entering a word by pressing the 2 through 9 keys. Touch each key only  
once for each letter.  
44  
   
Example: To enter “Hello” in T9 mode, touch the 4, 3, 5, 5, and 6 keys.  
The word that you are typing displays on the screen. It may change with each  
consecutive key that you touch.  
2. Enter the whole word before editing or deleting the keystrokes.  
3. When the word correctly displays, go to Step 4.  
If the word does not display correctly, touch the Next key to display other word  
choices from which you can choose. If these choices do not include the word  
you want to use, switch to Abc mode and enter the word you want.  
Example: Both the words “Of” and “Me” use the 6 and 3 keys. The phone displays the most  
commonly used choice first.  
4. Press Space to insert a space and start the next word.  
To enter a word in T9 mode while in Landscape Mode:  
1. Begin typing a word by pressing the A through Z keys. Touch a key for each  
letter.  
2. The word that you are typing displays on the screen. A list of word options  
displays and includes a number indicating the number of words available. The  
word and list of words may change as you type it.  
Entering Text  
45  
Touch to see list.  
Number of words  
in list.  
Scroll up and down,  
and touch the  
correct word.  
3. Scroll up and down in the word options box to select the desired word.  
4. If these choices do not include the word you want to use, add a new word into  
the T9 dictionary.  
To add a new word into the T9 dictionary:  
menu (Landscape Mode), scroll to the end of the list, and select Add word  
.
2. Enter the word you want to add using Abc mode. For more information, refer  
to “Changing the Text Input Mode” on page 44.  
3. Touch OK to accept the newly added word. The word is added to the T9  
dictionary and becomes a word for the associated key press series.  
Note: The Add word feature may not be available for some languages.  
To enter periods, hyphens, and other special characters while in Portrait Mode:  
1. Touch T9Ab  
Symbols and then touch the corresponding key. If the symbol  
does not display on the initial screen, touch the left  
to display the next set of symbols.  
or right  
key  
2. Touch SYM  
T9 Abc to return to the T9Abc input mode.  
46  
To shift case in T9 mode:  
1. Touch Shift.  
2. Touch the desired letter on the keypad. There are three cases: Initial capital,  
Capital lock, and Lower case.  
To delete letters:  
1. Touch  
2. Touch and hold  
To move the insertion point to the next line in a message:  
Touch  
To navigate within existing text in Portrait Mode:  
.
to clear the display.  
.
1. Touch  
to display the navigation keys.  
, or to move the cursor in the indicated  
2. Touch  
,
,
direction.  
3. Touch  
to return to text entry mode.  
Touch OK to complete the message and return to the previous screen.  
Using Abc In Portrait Mode  
If you choose not to use Predictive Text (T9):  
1. Touch T9Ab  
Abc.  
2. Use the 2 through 9 keys to enter text.  
3. Touch the key, labeled with the letter you want. Once for the first letter, twice  
for the second letter, and so on.  
Entering Text  
47  
 
Using Numeric In Portrait Mode  
Use the Numeric mode to enter numbers into a text message.  
1. Touch T9Ab  
Numeric.  
2. Touch the keys corresponding to the digits you want to enter.  
Using Symbols  
Symbols mode enables you to insert symbols and punctuation marks into text.  
To enter symbols in Portrait Mode:  
1. Touch T9Ab  
2. Touch the desired symbol key.  
3. Touch the left or right  
the symbol does not display on the initial screen.  
4. To clear the symbol(s), touch  
5. Touch SYM Abc to return to the Abc input mode.  
Symbols to display a list of symbols.  
key to display the next set of symbols, if  
.
6. To enter a period, comma, hyphen, question mark, exclamation point, @,  
colon, left and right parentheses, apostrophe, slash, or the number 1, touch  
.@,  
. ABC mode applies grammar rules to ensure correct punctuation.  
To enter symbols in Landscape Mode:  
1. Touch the 123Sym key and touch the symbol on the key that displays the  
symbol you need.  
2. Touch  
to clear the symbol(s). Touch and hold  
to clear the display.  
Tip: The cursor moves to the right when you touch a different key. When entering the same letter  
twice or a different letter on the same key, wait for a few seconds for the cursor to  
automatically move to the right, and then select the next letter.  
48  
   
Using Emoticon (EMO) Mode  
1. Rotate your phone counterclockwise to a Landscape orientation.  
Note: The EMO option is available only when 123Sym mode has been selected.  
2. Touch the Text Input Mode button at the bottom of the screen and  
touch  
.
Emo  
3. After all characters have been selected, press OK  
,
Abc, or 123Sym.  
To enter Emoticons into a text message in Portrait Mode:  
1. Touch T9Ab  
Emoticons.  
2. Touch the  
or  
key to display the three Emoticon screens.  
3. After all characters have been selected, press OK or EMO  
.
Entering Text  
49  
 
Section 5: Contacts and Your Address Book  
This section allows you to manage your daily contacts by storing their name and  
number in your Address Book.  
Adding a New Contact  
Use the following procedure to store a new contact to your Address Book.  
1. Touch  
Create Contact. This opens the Add New Contact screen.  
Contacts  
2. Touch the image icon and assign a picture to the new entry by choosing one  
of three options:  
• Reset: although not an option with a new entry, deletes any previously assigned image.  
Take Photo: to use the camera to take a new picture and assign it to this entry.  
• Caller Image: to retrieve a previously stored image from your Pictures folder and assign it  
to this entry. Select an image and touch  
to assign the image and return to the  
previous Add New Contact screen.  
3. Touch the First Name and Last Name fields and use the on-screen keypad to  
enter names for the new entry, and touch OK  
4. Touch the Mobile field and use the on-screen keypad to enter the phone  
number for the entry, and touch OK  
Touch if you want to change the category type of the entry. Choose from  
the following: Home Work Fax, or Others  
.
.
,
,
.
5. Use your fingertip to scroll down the screen and touch any of the remaining  
fields to update their information. Touch OK, if required, to save your updates.  
Available fields consist of:  
• Home: allows you to enter the contact’s home phone number.  
• Email: adds a contact email address for this entry.  
• Group: assigns this contact to a group. Touch a group type to complete the assignment.  
50  
     
Recorded Audio categories. Touch a music file to play a short sample and then touch  
• Birthday: assigns a calendar date for the contact’s birthday. Touch Set to store the new  
date. For more information, refer to “Scrolling Through Field Entries” on page 21.  
• Note: allows you to enter notes associated with this contact. For more information, refer to  
“Entering Text” on page 41.  
6. To add more fields to your contact, touch Add More Fields. The following  
optional fields display:  
• Mobile: adds an additional Mobile number field for the entry.  
• Home: adds an additional Home number field for the entry.  
• Work: adds an additional Work number field for the entry.  
• Fax: adds an additional Fax number field for the entry.  
• Others: adds an Others field for the entry.  
• Email: adds an additional contact Email address field for this entry.  
• URL: adds a website’s URL to the entry.  
• DTMF: adds a DTMF tone string for use with this entry.  
• Group: creates an additional group field for group assignment.  
• Message Tone: adds a field used to assign a message tone that sounds when messages  
are received from this contact.  
• Nickname: adds a field that can be used to enter a nickname for the entry. The Nickname  
is not displayed when calls are made to or received from the contact.  
• Company: adds a Company field for this entry.  
• Job Title: adds a Job Title field for this entry.  
• Address - Home: adds a field used to assign a physical home address for this entry.  
• Address - Work: adds a field used to assign a physical work address for this entry.  
Contacts and Your Address Book  
51  
7. Touch the box next to an individual field to add that field.  
– or –  
Touch All to select all fields.  
8. Touch Done to store the new fields to the entry and return to the previous  
screen.  
9. Touch the new fields to enter information.  
10. Touch Save to store the new entry into the Address Book.  
Saving a Number Before a Call  
1. Touch  
and use the on-screen keypad to enter your number.  
2. Touch More  
Save to Address Book New  
.
– or –  
Select Update to edit an existing contact.  
Saving a Number After a Call Has Ended  
SEND  
1. Press  
to bring up the recent calls screen.  
– or –  
Touch  
Tools  
Recent Calls.  
Menu  
2. Touch a phone number from the list to reveal the Details page for the phone  
entry.  
3. Touch Add to Phonebook  
New.  
– or –  
Select Update to edit an existing contact.  
52  
Adding Pauses to Contact Numbers  
When you call automated systems, you are often required to enter a password or  
account number. Instead of manually entering the numbers each time, you can store  
the numbers in your Contacts along with special characters called pauses.  
To add a pause to a Contact:  
1. Touch Contacts , and then touch the name to open the Contact.  
2. Touch Edit and then touch the Phone Number field.  
3. Touch the screen at the place where the additional numbers need to be  
added.  
4. Press and hold  
to add a two-second pause, and use the keypad to  
enter the additional numbers.  
Note: If more than a two-second pause is required, press and hold  
as many times as needed  
to add additional two-second pauses.  
5. Touch OK. Touch Save to store your changes.  
Using Contacts  
Dialing a Number from Address Book  
Once you have stored phone numbers in the Address Book, you can dial them easily  
and quickly by either using their SIM card location number or by using the Search  
field to locate the entry.  
Finding an Address Book Entry  
You can store phone numbers and their corresponding names to your SIM card and  
to your phone onboard memory. Your Address Book refers to the information stored  
in one or both of these locations.  
Contacts and Your Address Book  
53  
 
1. To access your Address Book in Idle mode, touch  
Contacts. The  
Menu  
Address Book window displays.  
2. In the Address Book window, touch Contacts to see your contacts list.  
3. Select Contacts in the drop down menu in the upper right corner of the  
display. Additional entry categories include Groups and Favorites.  
4. In the Contacts list, drag the Power Search tab on the left side of the display to  
search your contacts alphabetically. When you get to the first letter of the first  
name you are looking for, release the tab and scroll to your selection.  
5. Touch  
adjacent to the selected entry to make the call.  
Address Book Options  
1. Touch  
and touch an Address Book name from the list .  
Contacts  
2. Touch  
to reveal your options:  
allows you to call a currently selected entry.  
• Send Message allows you to send a text message or a multimedia message to the  
• Call  
:
:
selected entry.  
3. Press to return to the previous Entry Options page.  
4. Touch Edit to alter the properties of the current entry such as: Name, Mobile  
number, Home number, or Email address. Touch Save to store your changes.  
5. Touch Delete to delete the current address book entry from the Phone or the  
SIM card.  
6. Touch More to reveal the following options:  
• Mark as Default: allows you to select a default number if more than one number is listed  
for contact.  
• Print via Bluetooth: allows you to send the selected contact entry information to a  
Bluetooth compatible printer.  
54  
 
• Send Business Card via: allows you to send a message to the selected entry that  
contains the information from an Address Book Business Card entry that you have on file.  
This can be sent as either a message or by way of Bluetooth.  
• Add to Favorites: allows you to add the selected contact to your favorites.  
FDN Mode  
FDN (Fixed Dialing Number) mode, if supported by your SIM card, restricts your  
outgoing calls to a limited set of phone numbers. When this feature is enabled, you  
can make calls only to phone numbers stored in the FDN list on the SIM card.  
Note: FDN Mode must be set to On in the Menu  
Settings  
Phone  
Security  
Fixed dialing  
mode option before you can add, change, or delete contacts on the FDN List.  
Changing the FDN Mode Status  
1. In Idle mode, touch  
Settings  
Phone  
Security.  
Menu  
2. Scroll down to the Fixed dialing mode field and touch On (to enable fixed  
dialing) or Off to disable the option.  
Important!: While Fixed Dial Mode is enabled, you will NOT be able to dial any number other than a  
created Fixed Dial Number.  
Creating New FDN Numbers  
With the Fixed Dial mode On, follow these procedures:  
1. In Idle mode, touch  
Contacts  
FDN Contacts Create FDN.  
Menu  
Note: If FDN is Off: touch Menu  
Contacts  
Address Book Settings  
Fixed Dial Contacts  
Create FDN. Then follow Steps 2-7.  
2. Enter your PIN2 password and touch Confirm. This number is provided to you  
by your Service Provider.  
Contacts and Your Address Book  
55  
 
3. Touch Name and use the on-screen alphanumeric keypad to enter a name for  
this FDN contact. Touch OK  
4. Touch Phone number and use the on-screen numeric keypad to enter a  
contact phone number for this FDN contact. Touch OK  
5. Touch the SIM card location field to then use the on-screen numeric keypad  
.
.
to enter a location value for the entry on the SIM card. Touch OK  
.
6. Touch Save to store the new FDN entry.  
PWR  
END  
7. Press  
to return to Idle mode.  
Groups  
Creating New Group  
You can manage your contacts by forming groups and customizing alerts.  
In Idle mode, touch Contacts Groups Create Group  
.
Menu  
Favorites  
Once you have stored phone numbers in the Address Book, you can add them to  
your Favorites list.  
Adding Favorites to Your Address Book  
1. In Idle mode, touch  
Contacts  
Favorites.  
Menu  
2. Touch Add  
.
3. Touch the Contact you want to add to your Favorites.  
Removing Favorites from Your Address Book  
1. In Idle mode, touch  
Contacts  
Favorites.  
Menu  
2. Touch Remove  
.
56  
   
3. To select, touch the Wastebasket icon in front of the Contact you want to  
remove from your Favorites.  
4. Touch OK. The contact is removed from your Favorites.  
Changing the Order of Your Favorites  
1. In Idle mode, touch  
Contacts  
Favorites.  
Menu  
2. Touch Change Order  
3. Drag the entry to the desired location in your Favorites.  
4. Touch OK  
.
.
Finding My Own Phone Number  
This menu allows you to access your own phone number.  
In Idle mode, touch  
Contacts  
Address Book Settings  
Own  
Menu  
Number  
<voice line #>. Your number displays.  
Checking the Address Book Used Space  
You can check how many names and numbers are stored in the Address Book, in  
both the SIM card and the phone memory and the capacity for both.  
1. In Idle mode, touch  
Contacts  
Address Book Settings  
Used Space.  
Menu  
• Phone: indicates how many Address Book entries out of a possible 2000 are in use.  
• USIM: indicates how many entries out of a possible 250 are in use on your SIM card.  
Additional No. 1: if you have added additional numbers to contacts saved on the SIM card, this  
is a counter of the number of SIM contacts with a second number saved on your SIM card.  
Additional No. 2:if you have added additional numbers to contacts saved on the SIM card, this  
is a counter of the number of SIM contacts with a third number saved on your SIM card.  
Additional No. 3:if you have added additional numbers to contacts saved on the SIM card, this  
is a counter of the number of SIM contacts with a forth number saved on your SIM card.  
Email: indicates how many email addresses exist on your SIM card.  
Contacts and Your Address Book  
57  
• FDN: indicates how many entries out of a possible 40 are in use on your FDN SIM  
memory.  
Note: Depending on the SIM card, the number of entries may differ.  
PWR  
END  
2. Press  
to return to Idle mode.  
58  
Section 6: Multimedia  
This section explains how to use the multimedia features of your phone, including  
Music, Music Player, Video Player, Gallery, Camera, and Camcorder.  
Adding Music to Your Handset  
Music files (ringtones and full tracks) can be added to your handset by using one or  
more of the following methods:  
Purchase and download music and ringtones directly to your handset over your wireless  
carrier’s network by using the Music – Shop Music feature (also accessible from My  
folders).  
Note: Audio files smaller than 300 KB are treated as ringtones, whereas audio files larger  
than 300 KB are stored in the Music Folder. To listen to music smaller than 300 KB,  
go to Menu  
My folders  
Audio  
Music. You can not assign an MP3 file larger than  
300 KB as a ringtone.  
Transfer music files from a personal computer using a media player application and an  
optional USB Data Cable and an optional microSD Memory Card.  
TM  
Note: When the Bluetooth feature is active on your handset, USB communication is not available.  
To transfer files to your handset, turn off the Bluetooth functionality (Menu Bluetooth  
or Menu Settings Connectivity Bluetooth).  
Note: The maximum number of songs you can synchronize between your phone and your PC  
is 1500.  
Transferring Music from a Personal Computer  
In order to download music from the computer to your handset, a microSD card and  
USB data cable are required. These items are sold separately.  
1. Using your computer, open your preferred Windows Media Digital Rights  
Management (WMDRM) PC music management client.  
Multimedia  
59  
 
2. Download the selected song to your library.  
Note: If the music file is protected, Media Player blocks the playing or synching of that file.  
3. Verify the pre-insertion of the microSD card into the handset. For more  
information, refer to “Installing the Memory Card” on page 10.  
4. Use the USB adapter cable to connect the handset to the target PC. When an  
active connection has been established, a USB icon (  
phone.  
) appears on the  
5. Touch  
Settings  
Connectivity  
Select USB mode  
Media player  
.
Menu  
For more information, refer to “Configuring Your Phone USB Settings” on  
page 107.  
6. Once the USB connection has been established, the handset displays  
Connected” and the computer screen then shows your device. If the  
detection occurs, skip to step 8.  
7. Locate the song on your computer and using your right mouse button, click  
Copy  
.
8. Open the Removable Disk drive corresponding to the microSD card location  
on the phone.  
9. Open the Music folder (for example, ...\Card\Music) you want to upload from  
the handset.  
10. Using your right mouse button, click Paste. This step begins the download  
process.  
60  
Note: The Music Player does not necessarily support all features of a particular file format nor all  
the variations of those formats. The Music Player includes support for Windows Media Digital  
rights Management (WMDRM), which allows you to play some purchased or subscription  
content. Copyright protections may prevent some images, music (including ringtones), and  
other content from being copied, modified, transferred, or forwarded.  
Playing Music Through a Stereo Bluetooth Device  
Your device supports the Stereo Bluetooth profile (A2DP), and, when connected to a  
stereo Bluetooth headset, plays back music in stereo from the phone through the  
headset.  
1. Pair and connect your handset to a stereo Bluetooth device. For more  
information, refer to “Connecting to Other Bluetooth Devices” on page 105.  
2. From the list of compatible devices, select the previously paired Bluetooth  
headset to begin listening to your song through the headset.  
3. Touch  
Tools  
Music Player  
All music.  
Menu  
4. Select a song to play within the Music Player.  
Playing Music While Using the Phone  
The Music Player allows you to play music in the background while performing  
other tasks on your phone. The music pauses when an incoming call is accepted  
and resumes when the call is ended. Music continues to play when you receive a  
Text Message, a Multimedia Message, or an Instant Message.  
The other functions you can use are:  
Call: make or receive a call (music player is paused)  
Messaging: send or receive a text or multimedia message. Music continues to play unless  
an audio clip is received as a part of a multimedia message.  
Browser: browse the web (music continues to play).  
Multimedia  
61  
Music Player: turns on Music Player, or allows you to use full-screen controls of the music  
player.  
Games: lets you play games while listening to music.  
PWR  
END  
Important!: When you are finished using the Music Player function, you must press  
the function to prevent the battery from losing its charge. Pausing the player  
continues to use the battery.  
to stop  
Music Player Settings  
1. Touch  
Tools  
Music Player  
Settings.  
Menu  
2. Touch On or Off to either activate or deactivate the Background playing  
option. This determines whether you want the music to play in the  
background while outside of the player.  
3. Touch Save  
.
Using Playlists  
Playlists are used to assign songs to a list of preferred media, which can then be  
grouped into a list for later playback. These Playlists can be created using either the  
handset’s Music Player options menu or from within a third party music application  
(such as Windows Media Player) and then downloaded to the handset.  
Creating a Playlist  
Touch  
Tools  
Music Player  
Music Player  
Playlists  
Playlists  
Playlists  
Create playlist.  
Menu  
Adding Songs to a Playlist  
Touch  
Tools  
.
Menu  
Changing the order of songs in a Playlist  
1. Touch  
Tools  
2. Touch a previously created playlist.  
3. Touch More Change Order  
Music Player  
.
Menu  
.
62  
4. Touch a song.  
5. Touch the new location. The first song is moved to the new location.  
6. Touch OK when all changes have been made.  
Removing songs from a Playlist  
1. Touch  
Tools  
2. Touch a previously created playlist.  
3. Touch Remove Tracks  
Music Player  
Playlists.  
Menu  
.
4. Touch the box next to any available music file you want to remove.  
– or –  
Touch Select All to select all available songs in the list.  
5. Touch Remove and wait for the songs to be deleted from the current playlist.  
Transferring Music Using a Media Application  
A USB cable, microSD card, and a current version of a media application (such as  
®
®
Napster or Windows Media Player ) are required for this procedure.  
1. Open the media player on your personal computer (if you are using Windows  
Media Player, use version 10.0 or higher).  
2. Touch  
Settings  
Connectivity  
Select USB mode  
Media player.  
Menu  
For more information, refer to “Configuring Your Phone USB Settings” on  
page 107.  
Multimedia  
63  
3. Use the USB adapter cable to connect the handset to the target PC. When  
an active connection has been established, a USB icon (  
the phone.  
) appears on  
4. Once the USB connection has been established, the handset displays  
Connected” and the computer screen then shows your phone.  
Note: The following steps reflect the procedure used with Windows Media Player. If you are using  
either Napster or some other form of media player, you should refer to that application’s  
Help files for specific directions.  
5. If this is your first time connecting your phone to Windows Media Player you  
need to enter a unique name for this phone connection. This assigns a name  
to both the phone (when recognized) and to the internal microSD card.  
6. Click Finish to continue to the application. You should then notice that the  
Sync tab is active and displaying a connection with the phone and displaying  
the name you created.  
7. From within the Windows Media Player application, click on the Sync tab.  
Available songs are then listed on the left side of the application.  
8. If not already active, click the Sync tab.  
9. Choose the destination location for the media files. The Card entry you named  
appears in a drop-down list on the left side of the screen.  
10. Click on the Library entry (from the left column) and select a category to  
reveal available songs.  
11. Click a song from the center column and drag it into the Sync List section of  
the current page. This then places the current song on a “wait list” for update  
to the target location within the phone.  
64  
12. Click the Start Sync button (at the bottom of the Sync List) to begin uploading  
the selected songs to your handset. A “synchronization in progress”  
message appears on the application. Do not unplug the handset during this  
process. Once complete, a Sync Results folder then appears below the device  
entry to indicate sync status.  
13. It is now safe to unplug the USB connector from the handset.  
Importing a Playlist from Windows Media Player  
1. Open Windows Media Player on your computer (version 10.0 or higher).  
2. Use the USB adapter cable to connect the handset to the target PC. When  
an active connection has been established, a USB icon (  
the phone.  
) appears on  
3. Once the USB connection has been established, the handset displays  
Connected” and the computer screen then shows your phone.  
4. If not already active, click the Sync tab.  
5. Locate the Playlists section (upper-left).  
6. Right-click a playlist entry and select Add to ‘Sync List’.  
7. Click the Start Sync button (at the bottom of the Sync List) to begin uploading  
the selected playlist to your handset.  
8. It is now safe to unplug the USB connector from the handset.  
Music Player  
The Music Player is an application that can play music files. The music player  
supports files with extensions AAC, AAC+, eAAC+, MP3, WMA, 3GP, MP4, and M4A.  
Launching the Music Player allows you to navigate through your music library, play  
songs, and create playlists (music files bigger than 300 KB are displayed).  
Multimedia  
65  
   
Using the Music Player  
1. Touch  
Tools  
Music Player  
.
Menu  
– or –  
Drag  
from the Widget List and touch it.  
2. Touch a library category (All music, Artist, Album, Genre, or Playlists) to view  
the available music files.  
3. Scroll through the list of songs and touch an entry to begin playback.  
Music Player Functions  
1. Touch any of the following on-screen buttons during playback to activate  
their features:  
Shuffle mode button:  
Shuffle On: the current list of songs are  
randomly shuffled for playback.  
Shuffle Off: songs play in order and are not  
shuffled.  
Equalizer button:  
Equalizer presets include: NORM (normal),  
NORM  
ROCK, POP, DANC (dance), CLAS (classical),  
JAZZ, WIDE, DYNA (dynamic), and SURR  
(surround). Your phone is using the SRS™  
solution.WIDE=WOWHD(Voice),andDYNAMIC  
= WOWHD.  
66  
Repeat button:  
Repeat one: repeats the currently playing  
song.  
Repeat all: replays the current list when the  
list ends.  
Play All: plays the current song list once.  
Touch quickly to move to the beginning of  
the current song.  
Touch and hold to play the previous song.  
Touch once to play the current song.  
Touch once to pause the current song.  
Advances to the next song.  
Touch and hold to fast forward through the  
current song.  
2. Touch the player menu options at the bottom of the screen to reveal additional  
menu functions:  
• Library: displays the Music Player library view (Now playing, All music, Artist, Album,  
Genre, and Playlists).  
• Minimize: reduces the player and leaves it running in the background so you can navigate  
to other programs or activities.  
Multimedia  
67  
• More: provides access to options such as:  
Add to playlist: allows you to add the current audio file to a selected playlist.  
Send via: allows you to send the current file via a message attachment or as a data file  
delivered to a Bluetooth-capable device.  
Settings: allows you to access the Background playing Settings menu.  
Properties: allows you to view basic information for the current song such as Name, Format,  
Size, Forwarding, Date created, and Location. This option also allows you to view media  
information such as Artist, Title, Album, Track length, Genre, Recording date, and Format.  
Video Player  
The Video Player application plays video files stored on your microSD card.  
1. Touch  
Video  
.
Menu  
All videos that you have on your memory card display.  
2. Touch the video that you want to play.  
The video begins to play and the following video controls are available:  
Pause the video.  
Start the video after being paused.  
Rewind the video.  
Fast-forward the video.  
Original screen size view (Landscape  
x
1
mode only).  
Full-screen view (Landscape mode only).  
68  
 
Pictures  
The Pictures menu is where you view photos. You can also perform basic editing  
tasks, view a slide show, set photos as wallpaper or contact image, and share as a  
picture message.  
Touch  
Pictures  
.
Menu  
From the Pictures page you can access the following menu options:  
Create Folder: create a new folder on either the Phone or Memory Card.  
Manage: allows you to move or copy an existing unlocked folder or file.  
More: provides you with the ability to Delete, Rename, Sort by, Send via Bluetooth,  
Bluetooth Visibility, and Lock or Unlock certain files or folders.  
Image Features  
Touch a graphic from the Pictures page to display the image. From the image viewer  
page, you have access to both macro functions (Zoom) and menu options. If the  
icons and options do not appear when the picture displays, touch the screen below  
the picture.  
Up and Down Arrows: allow you to magnify the current image. Touch and hold the picture  
and drag it up and down to zoom out.  
Send: lets you send the currently active image as part of a new multimedia message or to  
an external device via Bluetooth.  
Set as: allows you to assign the current image as either your current Wallpaper or as a  
display Caller Image used by a specific entry within your Address Book.  
More: allows you to choose from the following image options:  
Delete: allows you to delete the current picture.  
Rename: allows you to rename the current picture.  
Slide show: allows you to play a slide show using the pictures currently available from within  
the Pictures folder. Touch the screen and touch Pause or Play to stop or resume the slide  
show. Touch Previous or Next to navigate through the pictures.  
Edit: allows you to edit the current image by applying various image effects. For more  
information, refer to “Editing Images” on page 70.  
Multimedia  
69  
 
Print via: allows you to make a selected graphic printable by either USB or Bluetooth printer.  
Properties: displays a listing of the image’s properties such as: name, format, resolution,  
size, and so on.  
Note: Editing is only available for unlocked images or non-DRM images.  
Editing Images  
1. Touch  
Pictures  
<image>  
.
Menu  
2. Touch More  
this image).  
– or –  
Edit File  
Open or Save as (to save a renamed copy of  
Touch More  
Edit and select from any of the following:  
• Effects: allows you to choose from among several effects such as: Filter  
,
Style, Warp, or  
Partial Blur  
.
• Adjust: allows you to adjust Auto Level  
,
Brightness/Contrast, and Color  
.
• Undo: allows you to reverse the previous change.  
3. Touch the tab above Undo to display the following additional options:  
Rotate and Flip the picture. Touch the buttons to  
rotate or flip (left to right or top to bottom) the  
current picture.  
Resize the image. Touch the new size and touch  
OK.  
Crop the image. Drag the frame to position it.  
Touch OK to crop the area.  
InsertTextontheimage.Dragthetexttopositionit.  
70  
InsertImage onthecurrentimage. Dragtheframe  
to position the inserted picture.  
InsertEmoticononthecurrentimage.Toucheither  
end of the emoticon list to scroll through the  
possibilities and touch an emoticon. Drag the  
emoticon to position it.  
InsertClipArtontheimage.Toucheitherendofthe  
clip art list to scroll through the possibilities and  
touch an item. Drag the emoticon to position it.  
Camera  
This section explains how to use the camera on your phone. You can take  
photographs and shoot video by using the built-in camera functionality. Your 2.0  
megapixel camera produces photos in JPEG format.  
Important!: Do not take photos of people without their permission.  
Do not take photos in places where cameras are not allowed.  
Do not take photos in places where you may interfere with another person’s privacy.  
Using the Camera  
Taking Photos  
Taking pictures with your device’s built-in camera is as simple as choosing a  
subject, pointing the camera, then pressing the camera key.  
Note: When taking a photo in direct sunlight or in bright conditions, shadows may appear on the  
photo.  
1. In Idle mode, press the Camera key  
to activate the camera mode.  
Multimedia  
71  
     
2. Using the phone’s main display screen as a viewfinder, adjust the image by  
aiming the camera at the subject.  
3. Press the Up or Down Volume keys to adjust the zoom of your image. (Zoom  
is not available when the resolution is set to the maximum setting.)  
stored in your designated storage location. If no microSD is installed, all  
pictures are stored on the Phone.) For more information, refer to “Camera  
and Camcorder Options” on page 73.  
Note: The number of JPEG pictures taken and the number of pictures remaining on the selected  
media appears in the top center part of the screen. The remaining number of pictures is an  
approximate number based on the current image size.  
5. If desired, before taking the photo, you can touch on-screen icons to access  
various camera options.  
6. When viewing a picture after you have taken it, touch and hold the picture to  
zoom in on an area of the picture. You can magnify the picture up to x2.0.  
7. Press  
to return to the viewfinder.  
72  
Camera and Camcorder Options  
Options are represented by icons across both sides of the screen.  
Note: The options disappear after a few seconds. Touch the screen to make them reappear.  
Camera, Camcorder: allows you to take a photo or record a  
video. Once you change the mode, the corresponding  
indicator appears at the top left of the display. Choose  
Camera or Camcorder.  
Recording Mode: allows you to set the Recording mode to  
either Normal (limited only by available space on  
destinationlocation)orLimitforMMS(limitedbyMMSsize  
restrictions). (Recording mode is only available in  
Camcorder mode).  
Shooting Mode: allows you to set the shooting mode.  
Options are:  
Single: take a single photo and view it before returning  
to the shooting mode.  
Continuous: take a succession of consecutive photos  
by pressing and holding the Camera key.  
Multimedia  
73  
 
Panorama: take a landscape photo by taking an initial  
photo and then adding additional images to itself. The  
guide box lets you view the area where the second  
part of the panoramic picture should fall within by  
highlighting the box in yellow. If you hold the camera  
still when it turns yellow, the picture is automatically  
taken. Repeat this step for up to six segments. When  
you are done, press the Camera key.  
Smile Shot: the camera focuses on the face of your  
subject. Once the camera detects the person’s smile,  
it takes the picture.  
Mosaic: take multiple photos and then group them  
together into a single final photo.  
Frame: allows you to choose a custom frame border  
for your image. Choose from one of the 20 available  
frames.  
Camera Resolution: allows you to set the image size to  
either: 2M (1600 x 1200), 1.3M (1280 x 960),  
0.3M (640 x 480), or 320 x 240.  
Camcorder Resolution: allows you to set the video size to  
either: 320 x 240 or 176 x 144.  
320  
240  
74  
Settings (lower left corner): allows you to customize your  
cameraandcamcordersettings.Choosefromthefollowing  
options:  
Camera and Camcorder  
:
Effects: allows you to change the color tone or apply  
special effects to the photo. Options include: None,  
Black and white, Sepia, Negative, or Watercolor.  
Camera  
:
Exposure Meter: allows you to set how the camera  
measures or meters the light source: Matrix,  
Center-weighted, or Spot.  
Night Mode: allows you to turn On or Off the Night  
mode depending on the lighting conditions.  
Image Quality: allows you to set the image quality to:  
Superfine, Fine, or Normal.  
Camcorder  
:
Video Quality: allows you to set the video quality to:  
Superfine, Fine, or Normal.  
Multimedia  
75  
Camera and Camcorder Settings tab (upper right corner)  
:
The following are additional camera and camcorder  
settings.  
Guidelines: allows you to turn the guidelines On or Off.  
Review: allows you to activate the instant review  
feature where images are displayed immediately after  
review (On or Off).  
Shutter Sound: allows you to set the Shutter sound to  
three different shutter sound or to turn it off. (Only  
available in Camera mode.)  
Audio Recording: allows you to record audio while  
recording video. Selecting Off, temporarily mutes the  
microphone and records only video.  
(Only available in Camcorder mode).  
Storage: allows you to configure the default storage  
location for images and videos as either Phone or  
Memory card (if inserted).  
GPS Connection: allows you to turn GPS On or Off.  
(Only available in Camcorder mode)  
White Balance: allows you to set this option to one of  
the following choices: Auto, Daylight, Incandescent,  
Fluorescent, or Cloudy.  
Timer: allows you to set a timer for how long to wait  
before taking a picture or video. Options include: Off, 2  
Seconds, 5 Seconds, and 10 Seconds.  
76  
Brightness: allows you to adjust the brightness level by  
moving the slider across the page.  
Quickview: allows you to access the options page for a  
selected image or video. Options include: Send (Via  
MessageorBluetooth),Delete,andMore(Setas,Edit,Slide  
show, Rename or Properties).  
Pictures and Videos Folder Options  
After you take a photo or shoot a video, you can access various options from the  
Pictures and Videos Folder page.  
Touch  
and then touch one of the available options:  
Send: lets you send the currently active image as part of a new multimedia message or to  
an external device via Bluetooth.  
Delete: erases the currently selected image or video.  
More: touch this option to display the following options:  
Set as: allows you to assign the current image as either your current Wallpaper or as a  
display Caller Image used by a specific entry within your Address Book.  
Slide show: allows you to view your pictures and videos in a slide show.  
Edit: allows you to edit the current image using any of the following options:  
• File: allows you to open another picture folder and picture or to save the current picture  
under a new name.  
• Effects: allows you to choose from among several effects.  
• Adjust: allows you to adjust Auto level  
,
Brightness  
/
Contrast, and Color  
.
• Undo: allows you to reverse the previous change. Touch the tab above Undo to display  
additional options.  
Rename: allows you to rename the picture using the on-screen keypad.  
Multimedia  
77  
Properties: Displays Basic Info and Media Info about the current picture or video, such as  
name, format, resolution, size, and so on.  
Note: Edit and Set as features are not available when the camcorder mode is active.  
Press  
to return to the previously active camera or camcorder page where  
you can take another photo or shoot a new video.  
Accessing the Pictures Folder  
1. Touch  
Pictures.  
Menu  
2. Touch a photo to open it in the viewer.  
Options available from the main Pictures folder before you select a picture are:  
Create Folder: create a new folder on either the Phone or Memory Card.  
Manage: allows you to Move or Copy an existing, unlocked picture or pictures.  
Touch the box next to each picture you want to move or copy or touch Select All to move or  
copy all pictures  
Touch Move or Copy  
.
Select the folder to which the pictures should be moved or copied or create a new folder.  
More: provides the following options:  
Delete: allows you to delete one or more pictures.  
Rename: allows you to rename pictures.  
Sort by: allows you to sort pictures by Date, Type, Name, or Size.  
Send via Bluetooth: allows you to send one or more pictures to a Bluetooth device.  
Bluetooth Visibility: allows you to make the one or more pictures visible to Bluetooth  
devices. This option only appears on photographs taken with your camera.  
Lock/Unlock: allows you to lock or unlock one or more pictures to prevent deletion. Lock  
prevents a picture from being deleted. Unlock allows the picture to be deleted.  
78  
Selecting and Using the Pictures Folder  
Touch a picture from the Pictures page to display the image. From the image viewer  
page, you have access to both macro functions (Zoom) and menu options.  
Zoom: Touch and hold the picture to zoom in on an area of the picture. Touch and drag the  
picture to move the area of the picture that is visible. Use the inset image to navigate  
around the picture.  
Send: lets you send the currently active image as part of a new multimedia message or to  
an external device via Bluetooth.  
Set as: allows you to assign the current image as either your current Wallpaper or as a  
display Caller Image used by a specific entry within your Address Book.  
More: allows you to choose from the following image options:  
Delete: allows you to delete the current picture.  
Rename: allows you to rename the current picture.  
Slide show: allows you to play a slide show using the pictures currently available from within  
the Pictures folder. Touch the screen and touch Pause or Play to stop or resume the slide  
show. Touch Previous or Next to navigate through the pictures.  
Edit: allows you to edit the current image by applying various image effects. ?  
Print via: allows you to make a selected graphic printable by a Bluetooth printer.  
Properties: displays a listing of the image’s properties such as: name, format, resolution,  
size, and so on.  
Assigning an Image as a Wallpaper  
Pictures <image>  
Wallpaper  
3. Touch the screen to reveal the adjustment tools:  
1. Touch  
.
Menu  
2. Touch Set as  
.
Touch and hold the picture to zoom in on an area of the picture. Touch and drag the  
picture to move the area of the picture that is visible. Use the inset image at the bottom left  
of the screen to navigate around the picture.  
• Rotate: orients the current image in either a landscape or portrait orientation.  
4. Touch Set to store the new settings and assign the wallpaper image.  
Multimedia  
79  
Assigning an Image to an Address Book Entry  
1. Touch  
Pictures  
<image>  
.
Menu  
2. Touch Set as  
Caller Image  
Search Contact, touch an entry, and  
touch Save  
.
– or –  
Touch Set as  
Caller Image  
Create Contact and create a new Address  
Book entry with the image already assigned.  
Using the Camcorder  
In addition to taking photos, the camera also doubles as a camcorder allowing you  
to also record, view, and send videos.  
Shooting Video  
Tip: When shooting video in direct sunlight or in bright conditions, it is recommended that you  
provide your subject with sufficient light by having the light source behind you.  
1. In Idle mode, press the Camera key  
side of the phone to activate the camera mode.  
2. Touch then touch Camcorder ).  
located on the lower right-hand  
(
3. Using the phone’s main display screen as a viewfinder, adjust the image by  
aiming the camera at the subject.  
4. Press the Camera key again to begin shooting video.  
5. Touch  
your Videos folder.  
6. Once the file has been saved, touch  
7. Press to return to the viewer.  
or the Camera key to stop the recording and save the video file to  
to play back your video for review.  
80  
 
Camcorder Options  
Camcorder options are represented by icons across both sides of the screen.  
For more information, refer to “Camera and Camcorder Options” on page 73.  
Camcorder Options after a Video is Taken  
After you finish shooting a video, you can use various options that appear as icons  
on the screen. Touch an icon to activate the function.  
Touch  
and then touch one of the available options:  
Send: lets you send the currently active video as part of a new multimedia message or to an  
external device via Bluetooth.  
Delete: erases the currently selected video.  
More: allows you to choose from the following video options:  
Slide show: allows you to view your pictures and videos in a slide show.  
Rename: allows you to rename the video.  
Properties: displays file information such as name, format, resolution, size, and so on.  
Note: Edit and Set as are not available features when the camcorder mode is active.  
Press  
to return to the previously active camera or camcorder page where  
you can shoot a new video.  
Accessing the Video Folder  
Touch  
My folders  
Video.  
Menu  
Options available from the main Video folder before you select a video are:  
Create Folder: create a new folder on either the Phone or Memory Card.  
Manage: allows you to Move or Copy an existing, unlocked video or videos.  
Touch the box next to each video you want to move or copy or touch Select All to move or  
copy all videos.  
Touch Move or Copy  
.
Select the folder to which the videos should be moved or copied or create a new folder.  
Multimedia  
81  
More: provides you with the options Delete, Rename, Sort by, Send via Bluetooth, Bluetooth  
Visibility, and Lock/Unlock for certain videos.  
Delete: allows you to delete one or more videos.  
Rename: allows you to rename videos.  
Sort by: allows you to sort video clips by Date, Type, Name, or Size.  
Send via Bluetooth: allows you to send one or more videos to a Bluetooth device.  
Bluetooth Visibility: allows you to make one or more videos visible to Bluetooth devices.  
Lock/Unlock: allows you to lock or unlock one or more videos to prevent deletion. Lock  
prevents a video clip from being deleted. Unlock allows the video clip to be deleted.  
Once you have selected the video to play, your options are (touch  
landscape mode):  
for options in  
Send via: allows you to send the video clip as part of a new multimedia message or to an  
external Bluetooth device.  
Properties: displays file information such as name, format, resolution, size, and so on.  
Touch the icon in the upper right corner of the display screen to change the Display  
Mode from original size to full screen or full screen in ratio.  
x
1
Original Size  
(
): allows you to change the display mode to the original size.  
Full-Screen View  
(
): allows you to change the display mode to the full-screen option  
while the video is playing. The entire screen is used, which may cause some minor  
distortion.  
Pause/Resume: (  
resume playing.  
Previous/Next: (  
/
)
allows you to pause the video being played and then  
/
)
touch briefly to jump to either the previously played video or  
the next file in the Videos folder. Touch and hold to rewind or fast forward.  
Exit: takes you back to the Videos page.  
82  
Games  
The Games menu option allows you to shop for games. You can download new  
games and then save them to the Games folder.  
1. Touch  
Games  
.
Menu  
2. From the Games menu, touch Buy Games to launch the browser.  
3. Follow the on-screen instructions.  
Note: Service charges and subscription purchase may be required.  
Multimedia  
83  
 
Section 7: Messaging  
This section describes how to send or receive different types of messages. It also  
includes the features and functionality associated with messaging.  
Types of Messages  
Your phone provides the following message types:  
Text Messages  
Multimedia (Pictures and Video) Messages  
Email Messages  
The Short Message Service (SMS) lets you send and receive text messages to and  
from other mobile phones or email addresses. To use this feature, you may need to  
subscribe to your service provider’s message service.  
The Multimedia Messaging Service (MMS) lets you send and receive multimedia  
messages (such as picture messages and video messages) to and from other  
mobile phones or email addresses. To use this feature, you may need to subscribe  
to your service provider’s multimedia message service.  
Important!: When creating a message, adding an image, a sound file, or a video clip to a text  
message changes the message from a text message to a multimedia message.  
Messaging icons are displayed at the top of the screen and indicate when  
messages are received and their type. For more information, refer to “Icons” on  
page 17.  
Creating and Sending Messages  
1. Touch  
Messaging  
Create Message.  
Menu  
– or –  
While in a Main menu, touch  
at the bottom of the display.  
Message  
84  
       
2. Add a recipient by touching Tap to add recipient and then selecting an  
associated option:  
• Enter manually: to manually enter a destination using a valid cellular phone number.  
• Recent contacts: to select a recipient from a list of recently sent messages.  
• Contacts: to select a recipient from your Contacts list (valid entries must have a wireless  
phone number or email address).  
• Group: to select a recipient from the Group list.  
• FDN contacts: to select a recipient from your Fixed Dial Contacts list (if FDN mode has  
been turned on).  
3. Touch the empty text field and use the on-screen keypad to enter a message.  
– or –  
Rotate the phone counterclockwise on its side to display the QWERTY keypad.  
4. Touch OK (on-screen keypad mode) to save your text and return to the  
message screen.  
5. Add more recipients by touching the recipient field.  
6. Review your message and touch Send  
.
Additional Message Options  
1. Touch Insert to perform one of the following options:  
• Picture: allows you to choose an existing image from the Pictures list, then add it to your  
message by touching  
.
• Video: allows you to choose an existing video from the Videos list, then select  
• Audio: allows you to choose an existing audio file from the Audio list, then add it to your  
message by touching  
.
.
Text templates: allows you to insert one of the preset message templates to the text (for  
example, “Where is the meeting?”).  
Take picture: allows you to temporarily exit the message, take a photo with the phone’s  
built-in camera, and then add it to your message by touching Add  
.
Messaging  
85  
 
• Record video: allows you to temporarily exit the message, record a video clip using the  
phone’s built-in camcorder, and then add it to your message by touching Add  
.
• Record Audio: allows you to temporarily exit the message, record an audio clip using the  
phone’s microphone, and then add it to your message by touching Add to message  
.
• Favorites URL: allows you to temporarily exit the message, access your Favorites list,  
select the URLs you would like to add to the current message by touching the box next to  
the URL, and then touching Add  
.
• Contact Info: allows you to choose an existing Address Book entry, select any or all  
information by touching the box next to the field, and then add it to your message by  
touching Insert  
.
2. Touch More to perform one of these additional options:  
• Attach Files: allows you to add either a file, card, or other information such as a calendar  
entry, task, or note.  
File: allows you to insert an audio file, graphic, or video clip to your message as an attached file.  
Business card: allows you to insert the contact information for an entry from Address Book  
directly to your message as an attached file.  
Event: allows you to insert an Event entry from your calendar directly to your message as an  
attached file.  
Tasks: allows you to insert an entry from your calendar tagged as a Task directly to your  
message as an attached file.  
Memo: allows you to insert a presaved Memo (text) directly to your message as an attached file.  
Favorites URL: allows you to add a web address from your Favorites list of Internet sites as an  
attachment to the message.  
• Add subject or Remove subject: allows you to either add or delete a subject field for the  
new message (multimedia messages only).  
• Save to Drafts: saves the current message to the Drafts folder.  
• Save as Template: allows you to save the message as a template so you can use it again  
later.  
• Delivery Options: allows you to configure the options associated with sending the  
message.  
86  
3. When you have finished composing your message, touch Send to and  
confirm the recipient(s) or add additional recipients.  
4. Touch Send to deliver the message to the selected recipients.  
Attaching a Business Card to a Message  
To attach your Business Card to an outgoing message, follow these steps:  
1. Touch  
Contacts  
2. Create your Business Card by entering the information that you want and  
touch Save  
3. Touch More  
4. Enter your message and touch OK  
5. Add recipient(s) and touch Send  
Viewing New Received Messages  
Address Book Settings  
My Business Card.  
Menu  
.
Send Business Card via  
Message.  
.
.
1. In Idle mode, new messages are indicated by icons and a New Messages pop-  
up.  
2. Touch the View all button from the New Messages pop-up.  
Note: Once you view the message, it is removed from this notification screen. Go to Menu  
Messaging Inbox to access your messages.  
3. Touch a message you want to view. The selected message appears in the  
display.  
Tip: When viewing a text message, press the volume key Up or Down to increase or decrease the  
font size of the message text.  
Messaging  
87  
   
4. To play a multimedia message, touch  
or Retrieve.  
To pause playback of the multimedia message, touch  
To stop playback of the multimedia message, touch Stop  
.
.
5. To scroll through the message (if additional text pages have been added),  
touch the screen and in a single motion, scroll up or down the page.  
6. When you have finished, press  
.
Using Message Options  
Message options at the Inbox level differ according to the message type, what you  
have done with the message, and whether you are viewing the message. Some of  
the main message category types include:  
Inbox: stores any incoming message (text or multimedia).  
Outbox: stores a copy of the messages you have sent.  
Drafts: stores unsent messages that you want to edit or send later.  
With the list of current message displayed, use any of the following menu  
options:  
• List by: sort the current list based on one of the following criteria (the criteria is different  
depending on the type of message):  
Date, Sender, Recipient, Read/Unread, Message type, Subject, Size, or Lock/Unlock status.  
• Delete: deletes one or more messages. Touch the box next to each entry you want to  
delete or touch Select All to select all entries. Touch Delete to complete the process.  
With a message open for reading, use any of the following menu options:  
• Reply / Reply to: allows you to compose and send a reply to the message. This option  
reads Reply when replying to an SMS (Text) message or Reply to when replying to an  
MMS (Multimedia) message.  
• Delete: deletes the current message.  
88  
 
Forward: allows you to forward the message.  
Save to Address Book: allows you to save the recipient or sender’s information from the  
message to your Address Book as either a New or Updated entry. For more information, refer to  
“Contacts and Your Address Book” on page 50.  
Move to phone/Move to SIM: if a message is stored in the SIM card, it is saved to the phone’s  
memory. If a message is stored in the phone’s memory, it is then saved to the SIM card.  
Backup to memory card: allows you to save the message to your memory card.  
Save as Template: allows you to save text and multimedia as a template.  
Save to: allows you to save the message as an Event or a Memo.  
Save Attachment: allows you to save any selected attachments. If the filename matches  
one you already have in your folder, you are prompted to rename the filename. This option only  
appears for multimedia messages.  
Print via Bluetooth: allows you to print the contents of the message on a Bluetooth compatible  
printer.  
Properties: allows you to see properties of a message such as Subject, Date, From, To,  
Size, Priority, Delivery report, and Read report. This option only appears for multimedia  
messages.  
Lock/Unlock: allows you to secure a selected message by protecting it from accidental  
alterations. This option only appears for multimedia messages.  
Using Email  
To sign into your Email, follow the on-screen prompts in the Email setup wizard to  
configure your phone for your email account.  
Touch  
Messaging  
Email.  
Menu  
Using Exchange Email  
Configure your Exchange Email by entering your information in the fields at the on-  
screen prompts: Server URL, User Name, Password, Domain, turn on or off Use SSL.  
Messaging  
89  
   
Voicemail  
The Voicemail selection allows you to set up voicemail for your phone and to access  
your voice messages.  
Touch  
Messaging  
Voicemail.  
Menu  
Messaging Settings  
The Messaging Settings menu allows you to configure the settings for Auto Delete  
Inbox, Text Messages, Multimedia Messages, Email and Voicemail.  
Touch  
Messaging  
Messaging Settings.  
Menu  
Templates  
Besides entering text in your message by using the keypad keys, you can include  
preloaded Templates and create your own. You can also create and store  
multimedia templates.  
Touch  
Messaging  
Templates.  
Menu  
Select Text templates or Multimedia templates to add a stored template to your  
message or to create a new template.  
Deleting Messages  
When your phone memory is full, use the Delete by Folder option to erase obsolete  
messages and free memory for new messages. You can delete messages in these  
folders: Inbox, Read, Unread, Email, Outbox and Drafts.  
Touch  
Messaging  
Delete by Folder  
.
Menu  
Used Space  
You can check the amount of the memory being used and the memory remaining  
for Multimedia, Email and Text messages. The display shows the total space  
including the used and free space. You can also view how much space is currently  
occupied by each message box.  
90  
         
1. Touch  
Messaging  
Used Space.  
Menu  
2. Touch a particular folder for review using the drop-down list box.  
3. Touch the box next to a message to delete messages based on size.  
– or –  
Touch Select All to select all messages in the list.  
4. Touch Delete  
.
5. Press  
to return to the main menu.  
Messaging  
91  
Section 8: Change Your Settings  
This section includes tips on how to use your phone’s features, as well as how to  
change and customize the display settings, call handling, security settings, and  
other settings associated with your phone.  
Sound Profile  
This menu allows you to specify how you are informed of incoming calls and  
messages as well as other notification sounds your phone can make.  
Selecting a Profile  
1. Touch  
Settings  
Sound Profile.  
Menu  
2. Touch the radio button next to the profile name. The selected profile  
activates. Choices include:  
• Normal: The phone’s profile defaults to Normal where the incoming Call alert type is set  
to Vibration & Melody.  
• Silent: This mode is convenient when you want to stop the phone from making noise, in a  
theater for example.  
• Driving: In this mode, the speaker is active and launches the currently selected Call alert  
type when the associated notification is activated.  
• Outdoor: Use this mode if you are outdoors, and might not be able to hear the phone, or  
you need an increased volume in order to hear the phone. For example, you might be  
jogging and need the phone to vibrate and ring loudly.  
Silent Profile  
Turn on the Silent profile by one of the following methods:  
Touch  
– or –  
Settings  
Sound Profile  
Silent.  
Menu  
From the on-screen dial pad, touch and hold the  
key. Silent profile on  
is displayed. Touch and hold again, to change back to Normal profile.  
92  
   
Editing the Profiles  
The four sound profiles have settings for incoming calls, messages, and other  
notification sounds your phone can make.  
1. Touch  
2. Touch the drop-down menu (upper-right of the screen) and select the settings  
you want to change: Call Message, or Phone  
to the right of the radio button of the profile you want to edit.  
,
.
Note: Some Call Message, and Phone settings may not be available for each profile type.  
,
Editing Call Settings  
1. Select the Call Alert Type field and select one of the following and touch Save  
:
• Melody: the phone rings using the ring melody selected in the Voice Call Ringtone menu.  
• Vibration then Melody: the phone vibrates and then starts ringing.  
• Vibration & Melody: the phone vibrates and plays a melody simultaneously.  
2. Touch the Voice Call Ringtone field, touch to select a ringtone and touch Save  
.
3. Drag the Ringtone Volume slider to the volume level you desire (range is  
1 through 7).  
4. Touch Save to return to the Sound Profile menu.  
Editing Message Settings  
1. Touch the Message Alert Type field, select one of the following and touch Save  
:
• Melody: the phone rings using the ring melody selected in the Message Alert Tone menu.  
• Vibration: the phone vibrates 2 times.  
• Vibration & Melody: the phone vibrates and plays a melody simultaneously.  
• Mute: the phone is silent and does not play a melody or vibrate.  
2. Touch the Message Alert Tone field, then touch to select Cloud, Haze, Postbox,  
Postman, Sherbet, Stepping stones or Transparent piano, and touch Save  
.
Change Your Settings  
93  
3. Touch the Message Alert Repetition pull-down and select one of the following  
options and touch Save  
:
• Once: repeats the message alert once.  
• Every 2 Min: repeats the message every two minutes.  
4. Drag the Alert Tone Volume slider to the volume level you desire (range is 1  
through 7).  
5. Touch Save to return to the Sound Profile menu.  
Editing Phone Settings  
1. Touch the Keypad Tone pull-down and select one of the following tones and  
touch Save  
:
• Beep  
• Glossy  
• Mute  
2. Touch the Power On Type field, select one of the following and touch Save  
:
• Melody: the phone rings using the ring melody.  
• Vibration: the phone vibrates but does not play a melody.  
• Vibration & Melody: the phone vibrates and plays a melody simultaneously.  
• Mute: the phone is silent and does not play a melody or vibrate.  
3. Touch the Power Off Type field, select one of the following and touch Save  
:
• Melody: the phone rings using the ring melody.  
• Vibration: the phone vibrates but does not ring.  
• Vibration & Melody: the phone vibrates and plays a melody simultaneously.  
• Mute: the phone is silent and does not play a melody or vibrate.  
4. Drag the Phone Sound Volume slider to the volume level you desire (range is  
0 through 7).  
94  
Touch Save to return to the Sound Profile menu.  
Display and Light Settings  
In this menu, you can change various settings for the display or backlight.  
1. Touch  
Settings  
Display and Light.  
Menu  
2. Select one of the following options:  
Wallpaper  
Widget  
Font Type  
Brightness  
Backlight Time  
Wallpaper  
This menu allows you to change the background image displayed on the Main  
screens.  
1. Touch  
Settings  
Display and Light  
Wallpaper.  
Menu  
2. Touch a panel that corresponds to the Main screen that you want to change.  
3. Touch Pictures, scroll through the pictures, and touch the name area of a  
picture to view a full screen image.  
4. Touch one of the following options:  
Set: assigns the current image as the new wallpaper image that appears for the Main  
screen selected.  
• Rotate: allows you to rotate the image clockwise 90 degrees for each touch.  
5. Touch to the left of a picture name to immediately apply it as wallpaper.  
Widget  
The Widget settings menu allows you to select the widget applications that appear  
docked on the Idle screen.  
Change Your Settings  
95  
 
For more information, refer to “Widgets” on page 23.  
Font Type  
You can select one of three font options for the text style in the phone display.  
1. Touch  
Settings  
Display and Light  
Font Type.  
Menu  
2. Select Type1  
,
Type2, or Type3 and touch Save.  
Brightness  
Allows you to adjust the display brightness for the LCD to see better within different  
lighting conditions.  
Touch  
Settings  
Display and Light Brightness.  
Menu  
Backlight Time  
The backlight turns the screen on using a preset brightness level. When the set time  
runs out (8 seconds, 15 seconds, 30 seconds, 1 minute, 3 minutes or 10 minutes),  
the touch screen turns off. The phone can also be set to lock when the Backlight  
Time runs out.  
Touch  
Settings  
Display and Light Backlight Time.  
Menu  
Note: Modifying this setting will impact your battery life.  
Time and Date  
This menu allows you to change settings that affect the current time and date  
displayed, the time format and the date format.  
Touch  
Settings  
Time and Date.  
Menu  
Phone Settings  
To customize various phone settings:  
Touch Settings Phone.  
Menu  
96  
     
Language  
This menu allows you to select a display language for Screen Text and Input  
Language. Choose from Automatic, English and Español.  
Touch  
Settings  
Phone  
Language.  
Menu  
Touch Panel Auto Lock  
The Touch Panel Auto Lock feature locks your phone when the Backlight turns off.  
To modify this feature, follow these steps:  
Touch  
Settings  
Phone  
Touch Panel Auto-lock.  
Menu  
Security  
The Security feature enables you to restrict the use of your phone by others and to  
restrict the types of calls. You modify the following settings in the Security menu:  
Lock Phone, Lock SIM Card, Check PIN Code, Lock Applications, Fixed dialing mode,  
Change Phone Password, Change PIN Code and Change PIN2 Code.  
Various codes and passwords are used to protect the features of your phone.  
Touch  
Settings  
Phone  
Security.  
Menu  
Reset Phone  
You can easily reset your phone to its default settings. To reset your phone:  
1. Touch Settings Phone Reset Phone  
.
Menu  
2. At the All settings reset to factory defaults. Continue? prompt, touch Yes to  
reset or No to cancel.  
3. Enter your phone password, if prompted, and touch Confirm  
.
4. After the phone settings have been reset, the Reset Phone done confirmation  
displays.  
Once your phone resets to its default settings for those selected options, it  
automatically restarts in order to incorporate the new settings.  
Change Your Settings  
97  
Note: User Data, such as contacts, messages, pictures, videos, and music, is not deleted.  
Restore Phone  
The Restore Phone option is the same as the Reset Phone option described above in  
that all settings are reset to factory defaults. However, with the Restore Phone  
option, all user data is deleted.  
Warning!: All User Data such as contacts, messages, pictures, videos, and music will be deleted.  
Ensure that you remove your MicroSD card if applicable because it will be erased with  
the Restore Phone option.  
Airplane Mode  
Airplane Mode allows you to use many of your phone features when you are in an  
airplane or any other area where making calls or receiving calls or data is  
prohibited. When your phone is in Airplane Mode, it cannot send or receive calls or  
access online information. The Airplane Mode icon (  
signal strength indicator when active.  
) appears in place of the  
1. Touch  
Settings  
Phone.  
Menu  
2. Touch On or Off from the Airplane Mode field.  
3. Press  
to return to the previous Phone settings page.  
Call Settings  
Touch  
Settings  
Calls.  
Menu  
Adjusting the General Call Settings  
1. Touch General and select from the following options:  
• Show My Number: allows you to select how your caller ID is handled when an outgoing  
call is initiated. This is what others see on their Caller ID screen. This value can be made  
blank if you do not want your number displayed to other users.  
98  
   
• Auto Reject: allows you to set up and add numbers to a Reject List, which causes those  
numbers to be automatically sent to voice mail.  
Touch either On or Off to activate or deactivate the function.  
If active (On), touch the Reject List Add Number field to enter or search for numbers.  
Touch Save to save the Reject List numbers.  
Touch the box to the left of Unknown to reject any unidentifiable number.  
• Quick Reply: allows you to select and send a quick, one-line reply to a caller.  
Touch one of the message text areas to edit the message with the on-screen keypad.  
Touch a button to the right of the message text areas to quickly send the message text.  
• Call Answer: selects how your phone answers incoming calls. Selections are: The send  
key, Any key, and Automatic (Time: 1 second through 5 seconds).  
• Call Status Tones: allows you to activate an alert tone for one of two available status  
categories. Touch an option to make your selection and then touchSave to store your new  
selection. Options include:  
Call Connect Tone: allows you to activate an alert tone when the a connection has been made.  
Minute Minder: allows you to activate an alert tone that sounds every minute the call is active.  
• Alerts on Call: activates an alert tone for new messages being received during an active  
call. Touch Save to store setting.  
• TTY mode: TTY (also known as a TDD or Text Telephone) is a telecommunications device  
that allows people who are deaf or hard of hearing, or who have speech or language  
disabilities, to communicate with a telephone. This phone comes TTY-ready and only  
requires the insertion of the TTY device to enable this feature.  
2. Press  
to return to the Calls settings page.  
TTY Settings  
TTY (also known as a TDD or Text Telephone) is a telecommunications device that  
allows people who are deaf or hard of hearing, or who have speech or language  
disabilities, to communicate with a telephone. This phone comes TTY-ready and  
only requires the insertion of the TTY device to enable this feature.  
Change Your Settings  
99  
To access the TTY settings:  
Insert a TTY connector into the Headset/Adapter jack (on the top of the phone)  
to enable this function.  
For additional technical support you may access the following website: http://  
Adjusting the Voice Call Settings  
1. Touch Voice Call and select from the following options:  
• Call Waiting: this network service informs you when someone is trying to reach you  
during another call. You can specify individual call waiting options for voice calls and data  
calls.  
Touch of the available options: Activate  
,
Deactivate, Check Status (checks the status of this  
service on your account).  
• Auto Redial: the phone automatically redials the last active number if the call was either  
cut off or you were unable to connect.  
Touch either On or Off to activate or deactivate the function.  
Touch Save to store the new setting.  
2. Press  
Connectivity  
The phone has several communication and connection parameters that can be  
edited. For more information, refer to “Connections” on page 103.  
Applications Settings  
The Applications Settings feature allows you to configure the onboard applications:  
Messaging, Browser, Music Player, Record Audio, Calendar and Address Book.  
Touch  
Settings Applications Settings.  
Menu  
100  
   
Browser Settings  
To configure the parameters on the onboard browser, use the Browser  
Settings page.  
Touch  
Settings Applications Settings Browser  
.
Menu  
In Browser Settings, touch any of the following fields to adjust settings:  
Clear Caches: deletes the information stored in the cache. The cache stores the most  
recently accessed pages.  
Delete Cookies: delete cookies. Cookies are pieces of personal information sent to a web  
server while navigating the web.  
Cookie Options: sets whether cookies are stored on your phone (Accept All or Reject All). If  
you select Prompt, the phone asks you to save the cookies on every page requiring cookies.  
Delete History: deletes the record of any previously visited websites.  
Preferences  
:
changes the settings for the web browser to suit your preference.  
About Browser: displays the access version and copyright information about the browser.  
Calendar Settings  
To configure the starting day and view that is used when opening the Calendar  
application.  
1. Touch  
Settings Applications Settings  
Calendar.  
Menu  
2. Touch either of the following fields and edit the information:  
Starting Day: allows you to choose which day marks the first day in your calendar week  
(Sunday or Monday).  
View by: allows you to choose the default view for appointments used by the Calendar  
application when launched (Month, Week, or Day).  
3. Touch Save  
.
Change Your Settings  
101  
Address Book Settings  
To configure your Address Book application.  
1. Touch  
Settings Applications Settings  
Menu  
2. Touch one of the following fields and edit the information:  
• My Business Card: creates and attaches a virtual business card to be used as an  
attachment to outgoing messages. For more information, see “Attaching a Business  
Card to a Message” on page 87.  
• Save New Contacts to: defines the destination for new contact entries (Phone, SIM card,  
or Always ask).  
• View Contacts from: to filter the display of current Address Book entries. Options  
include: All, Phone, or SIM card.  
• Own Number: to display your current phone number.  
• Fixed Dial Contacts: assigns phone numbers as FDN entries.  
• UsedSpace: displays the memory storage allocation (total available and remaining) within  
both your Phone, SIM card, and FDN list.  
3. Touch Save, if required.  
4. Press  
to return to the Settings page.  
Memory Management  
You can easily check the amount of memory being used for storing data, such as  
messages, media, calendar data, or contacts entries. You can also delete any  
selected information from your phone:  
1. Touch  
Settings  
Memory Management.  
Menu  
2. Touch any of the following options:  
• Clear Phone Memory  
• Memory Card Details  
• Used Space  
102  
 
Section 9: Connections  
This section describes the various connections your phone can make including  
accessing the Internet with your Browser, connecting to other devices with  
Bluetooth, and connecting your device to a PC.  
Browser  
To access the Browser:  
1. Touch  
Applications  
Browser  
.
Menu  
2. Touch  
to view options or touch  
for full screen mode.  
Home Web Page  
When you access the Browser, the home web page displays. The blue bar at the top  
of the display disappears when the page is fully loaded. The home web page  
contains the following items:  
Address Bar: touch the address bar to display the on-screen keypad. Use the keypad to  
enter a new URL and touch Go to display the new web page.  
Recent Pages: touch the recent pages tab  
to display a drop-down list of recently  
viewed pages. Touch an entry in the list to go to that web page.  
Previous or Next Page: touch the Previous button or the next Next button to navigate  
between previously viewed web pages.  
Home Page: touch the Home Page button  
Web Page Reload: touch the Web Page Reload button  
Search: touch the Search button to display the on-screen keypad. Use the keypad to  
to return to the home web page.  
to reload the current web page.  
enter a search word or phrase. Touch Search Options to choose between Google Search  
or Yahoo Search. Touch Search (portrait) or OK (landscape) to initiate the search.  
Connections  
103  
       
Add to Favorites: touch the Add to Favorites button  
to add the current URL to your  
Favorites. To add a different URL to your Favorites, touch the Enter URL Address field to  
display the on-screen keypad. Use the keypad to enter the new URL and touch OK. Touch  
the Title field, use the on-screen keypad to enter a title, and touch OK. Touch Save to store  
the new favorite.  
Favorites: touch the Favorites button  
to display a list of your favorite URLs. Touch an  
entry in the list to transfer to the web page or choose from the following options:  
Add New: to add a new favorite.  
Delete: to delete an existing favorite. You can only delete URLs that you have added, which  
are marked with  
More:  
• Go to Home: return to the home web page.  
• Copy URL to Message: touch next to the URL you want to copy into a new text message  
and touch Done. The message Create screen displays with the URL.  
• Send URL via: lets you send a URL as a message attachment or to a Bluetooth device.  
Browser Settings: touch the Browser Settings button  
to access various browser  
related options such as clearing caches, deleting cookies, cookie options, deleting browser  
history, web page details, preferences, and about browser.  
Bluetooth  
Bluetooth is a short-range wireless communications technology capable of  
exchanging information over a distance of about 30 feet without requiring a  
physical connection. Unlike infrared, you do not need to line up the devices to beam  
information with Bluetooth. If the devices are within a range of one another, you can  
exchange information between them, even if they are located in different rooms.  
The following Bluetooth options are available:  
104  
 
Activation  
1. From Idle mode, touch  
Bluetooth  
.
Menu  
– or –  
Touch  
Settings  
Connectivity  
Bluetooth  
.
Menu  
2. Touch the Phone icon  
to activate Bluetooth.  
– or –  
Touch  
to deactivate Bluetooth.  
Device Name  
1. Touch  
Bluetooth  
My info.  
Menu  
2. Touch the Name field, touch and hold  
to erase the current name.  
3. Use the on-screen keypad to enter the new name for this device and touch  
OK  
.
4. Touch Save  
.
Phone Visibility  
1. Touch  
Bluetooth  
Visible.  
Menu  
2. Touch Yes or No to enable or disable the visibility, or discoverability, of your  
phone.  
Your phone becomes visible to other devices when you transmit your device name to  
others in your area. This allows other devices to detect your phone and request a  
connection. If your phone is not visible, you can still detect and connect to other devices  
while still hiding yourself from others.  
Connecting to Other Bluetooth Devices  
1. Touch  
Bluetooth  
Detected Bluetooth devices then appear as buttons on the Bluetooth page.  
2. Touch the desired device to begin pairing.  
Search.  
Menu  
Connections  
105  
 
3. Touch the Passkey field, enter the passkey used by the target device and  
touch OK  
4. Select a connection option and touch Pair  
.
.
5. Once the target device accepts the pair, your new device shows as connected  
(green) within the Bluetooth page.  
Bluetooth Secure Mode  
When the Bluetooth Visibility is turned on, your phone is wirelessly transmitting its  
phone name and status to every device within its range. This transmission can pose  
a security risk and incite unauthorized connection to your phone. It is recommended  
that you remain hidden unless necessary.  
Remote SIM Mode  
This mode allows you to turn On or Off Remote SIM Mode. Remote SIM mode, when  
set to On, allows the Bluetooth phone car kit to access the contact information  
stored on the SIM card.  
Note: There is a risk that another Bluetooth device (user) can access and modify your SIM card  
features and data.  
1. Touch  
Settings  
2. Touch On or Off from the Remote SIM mode field.  
3. Touch Save  
Connectivity  
Bluetooth  
My info.  
Menu  
.
Bluetooth Services  
The Bluetooth specification is a protocol that describes how the short-range  
wireless technology works, whereas services describe the individual devices that  
are supported. These services reduce the chance that incompatible devices are  
allowed to connect to your phone.  
106  
Headset: a Bluetooth headset enables both incoming and outgoing calls using Bluetooth  
headsets.  
Handsfree: a Bluetooth car kit or speakerphone enables both incoming and outgoing calls.  
Bluetooth Stereo Headset: used to make calls and listen to music through the Bluetooth  
stereo headset.  
Serial Port: used to connect to other Bluetooth devices through a virtual serial port.  
Dial up: used to provide Internet access for Bluetooth devices through the phone’s modem.  
Basic Printing: used to print images, text messages, personal data such as namecards,  
appointments, and so on, through a remote Bluetooth printer.  
File transfer: used to transfer files to and from Bluetooth devices.  
Object Push: used to exchange personal data (namecards, Address Book contacts, and so  
on) with Bluetooth devices.  
SIM Access: provides access to the SIM card on the phone.  
PC Connections  
You can connect your device to a PC using an optional PC data cable using various  
USB connection modes. When you connect the device to a PC, you can synchronize  
files with Windows Media Player, transfer data to and from your device directly, or  
launch Samsung PC Studio when a USB connection is detected.  
Configuring Your Phone USB Settings  
This menu selects the method of communication for the USB port.  
Note: The Bluetooth feature must first be disabled before initiating a USB connection with the phone.  
Prior to connecting the USB cable to the phone, install the latest version of the PC Studio  
application. This application installs the necessary USB drivers onto your machine. For a free  
download of PC Studio, go to www.samsung.com/us/support.  
Connections  
107  
   
1. Touch  
Settings  
2. Select one of the following USB modes:  
• Ask on connection: causes the phone to present a “Select USB Mode” pop-up when you  
Connectivity  
Select USB mode.  
Menu  
connect to the PC. You can then choose from either: Samsung PC Studio Media player  
or Mass storage  
,
,
.
• Samsung PC Studio: sets PC Studio to launch as the default application when a USB  
connection is detected.  
• Media player: sets the Media Player to launch as the default application when a USB  
connection is detected.  
• Mass storage: allows you to utilize the onboard storage capacity of the phone’s microSD  
card to store and upload files. This option allows your computer to detect the phone’s  
microSD card as a removable storage drive.  
3. Touch Save  
.
108  
Section 10: Applications  
Accessing the Applications Menu  
The Applications menu option allows you to access applications that are on the  
phone: My Space, Facebook, or you can launch your Browser. You can download  
applications and save them to the Applications folder.  
1. Touch  
– or –  
Applications  
.
Menu  
Touch  
My folders  
Applications.  
Menu  
2. From the Applications menu, touch a pre-installed application or an  
application you have previously downloaded.  
My Space  
Use this application to log in to your MySpace application and get automatic status  
updates.  
1. Touch  
Applications  
2. Touch the Email and Password fields, use the on-screen keypad to enter your  
information, and touch OK  
My Space.  
Menu  
.
3. Touch the box next to Remember me to save your Email and Password  
information.  
4. Touch Login to connect to MySpace.  
5. Follow the on-screen instructions.  
Applications  
109  
     
Facebook  
Use this application to log in to your Facebook application and get automatic status  
updates.  
1. Touch  
Applications  
2. Touch the Email and Password fields, use the on-screen keypad to enter your  
information, and touch OK  
Facebook.  
Menu  
.
3. Touch the box next to Remember me to save your Email and Password  
information.  
4. Touch Log in to connect to Facebook.  
5. Follow the on-screen instructions.  
Browser  
Browser allows you to access the internet. For more information, refer to “Browser”  
on page 103.  
110  
   
Section 11: My folders  
The topics covered in this section include Applications, Audio, Games, Pictures,  
Tools, Video, Other Files, and Used Space.  
1. Touch  
My folders  
2. Select from one of the following functions: Applications  
Pictures Tools Video Other Files, or Used Space  
.
Menu  
,
Audio, Games,  
,
,
,
.
3. If you have a memory card in your phone, touch the filter drop down (upper-  
right of My folders page) to filter the entries based on their current location  
(All, Phone, or Memory Card).  
My folders Functions  
This page provides you with several functions that can be activated from virtually  
any page within the My folders directories. Most editing features are only applicable  
to those files/folders that are not locked, and therefore editable.  
1. Touch  
My folders.  
Menu  
2. Select from the following:  
• Create Folder: create a new folder on either the Phone or Memory Card.  
• Manage: allows you to move or copy an existing unlocked folder or file.  
• More: provides you with the ability to Delete, Rename, Sort by, Send via Bluetooth,  
Bluetooth Visibility, and Lock/Unlock certain files or folders.  
Creating a New Folder  
1. Touch  
My folders  
2. If you have a microSD card inserted, you are asked where you want the new  
folder created. Select Phone or Memory Card  
Create Folder.  
Menu  
.
My folders  
111  
   
3. Use the on-screen alphanumeric keypad to create a new name for the folder  
and touch OK to create the folder.  
Managing Files and Folders  
1. Touch  
My folders  
Manage.  
Menu  
2. Select a migration option by touching either Move or Copy  
.
• Move: takes an unlocked file or folder and moves it to a new location.  
• Copy: takes the selected file or folder and duplicates it in the new location.  
3. Touch the box next to an individual, unlocked entry.  
– or –  
Touch Select All to select all available, unlocked entries.  
4. Touch Move or Copy  
.
5. Touch Phone or Memory Card depending on where you want to copy or move  
the files.  
6. Select the folder to copy or move the files to. Touch New Folder to create a  
new folder.  
7. Touch Paste Here/Move Here to copy or move the files.  
More Functionality  
1. Touch  
My folders  
More.  
Menu  
2. Select an on-screen option:  
• Delete: erases selected files and folders.  
• Rename: renames the selected files and folders.  
• Sort by: sorts the current available files and folders using either: Date, Type, Name, or  
Size.  
• Send via Bluetooth: sends a selected file via Bluetooth to another compatible device.  
112  
• Bluetooth Visibility: allows you to make specific files or folders visible to other Bluetooth  
devices.  
• Lock: locks or unlocks available files and folders.  
Applications  
The Applications menu provides access to My Space, and Facebook and  
the Browser.  
Audio  
The Audio option allows you to shop for tones, answer tones, and music. You  
can also access previously stored (pre-recorded) audio files from your internal  
microSD card.  
Tones  
You can shop, download, and save to your Downloaded Ringtones folder.  
1. Touch  
My folders  
Audio  
Tones.  
Menu  
A menu displays to give you the option of either shopping for tones or  
selecting from files previously stored to your phone.  
2. Touch Buy Tones and select a file to download. Follow the on-screen options.  
(These files are downloaded and stored in the Tones folder.)  
– or –  
Touch an available entry.  
3. From the playback page, touch Set as and select from the following options:  
• Call Rintone: allows you to assign the tone as the call rintone.  
• Caller Ringtone: select one of the following:  
Search Contact: allows you to assign a ringtone to someone in your Contacts list.  
Create Contact: allows you to create a new contact to assign a ringtone to.  
• Alarm Tone: allows you to assign the tone to an alarm.  
My folders  
113  
   
Music  
This menu displays a list of all your purchased songs. When you download music, it  
is stored in the Music folder. To access this menu use the following steps:  
1. Touch  
My folders  
2. Touch a music file to begin playback.  
3. To exit, press  
Audio  
Music.  
Menu  
.
For more information, refer to “Music Player” on page 65.  
Recorded Audio  
This menu shows a list of saved voice memos. When a voice memo is recorded and  
saved, it is stored in the Recorded Audio folder. To access this menu use the  
following steps:  
1. Touch  
My folders  
2. Touch a pre-recorded memo to begin playback.  
3. To exit, press  
Audio  
Recorded Audio.  
Menu  
.
Creating a new audio recording  
1. Touch  
Tools  
2. To start recording, touch  
Games  
Record Audio.  
Menu  
.
The Games menu option allows you to shop games using AppCenter. You can  
download new games, then save them to the Games folder.  
Pictures  
The Pictures menu option allows you to shop for and download new graphics  
(using AppCenter), then save them to your Pictures folder.  
114  
   
Buy Graphics  
1. Touch  
My folders  
Pictures Buy Graphics.  
Menu  
2. Follow the on-screen options to purchase the new image. The file is  
downloaded and stored in the Pictures folder.  
Tools  
The Tools folder provides access to the Camera, the Music Player, Voice  
Recognition, Record Audio, Alarms, the Calendar, Recent Calls, Memo, Tasks,  
Calculator, Tip Calculator, Converter (for currency, length, weight, volume, area, and  
temperature), World Clock, Timer, Stopwatch and SIM App.  
Other Files  
This feature provides additional storage of other miscellaneous file types that may  
not fit into any of the previous categories.  
To access the Other Files menu:  
Touch  
My folders  
Other Files.  
Menu  
Used Space  
The Used Space menu option allows you to view the usage and available memory  
for Applications, Audio, Games, Pictures, Video, and Other Files. To access the Used  
Space option, use the following steps:  
1. Touch  
My folders  
2. Choose from Applications  
3. Press to return to the Used Space menu.  
Used Space  
.
Menu  
,
Audio Games  
,
,
Pictures  
,
Video, or Other Files.  
My folders  
115  
     
Section 12: Tools  
The on-board applications (such as camera, camcorder, calendar, and alarms) can  
be supplemented with additional applications that can be purchased through the  
Samsung Apps.  
Tools  
Tools are applications that allow you to use your handset for a variety of non-phone  
Touch  
Tools  
.
Menu  
Camera  
For more information, refer to “Camera” on page 71.  
Music Player  
For more information, refer to “Music Player” on page 65.  
Voice Recognition  
Nuance Voice Recognition software is an advanced speech recognition software  
used to activate a wide variety of functions on your phone. Nuance software  
automatically voice activates (up to 2,000 contacts) for voice dialing and searching.  
No pre-recording or training needed. Speak a contact name naturally to dial and use  
your voice to look up contacts, launch applications, and navigate phone menus.  
1. Touch  
Tools Voice recognition.  
Menu  
2. At the voice prompt, say a command. The list of available commands is listed  
below.  
Note: This list of voice commands is briefly displayed.  
116  
         
Say a Command Options  
Call <Name or #>: dials a name or number listed in your contact list. If multiple numbers  
exist (such as, home, work, or other), say the name and the number type (location).  
Send Text <Name or #>: displays the Send Text screen.  
Lookup <Name>: allows you to use a voice command to locate and display contact  
information stored in the Contacts list.  
Go To <Menu>: accesses all the features of your phone if they are activated, such as:  
Calendar, Ringtones, Address Book, Voicemail, and Games.  
Check <Item>: lets you check your phone's status in the same report (Status, Messages,  
Missed Calls, Time, Signal Strength, Network, Battery, My Phone Number, and Volume).  
While the Say a command screen displays, you have two options:  
Tutorial: provides examples of how to use the voice commands.  
Settings: lists the settings for voice command software such as: Confirmation, Adaptation,  
Audio Modes, Speakerphone, and About.  
If the phone does not recognize your command, the Command not recognized  
screen displays with two options:  
Help: provides instructions on how to use voice commands.  
Restart: touch and try the command options again.  
Speak clearly when giving your command. There is no need to speak slowly or with  
added emphasis. The voice recognition software has been optimized to understand  
your speech in its natural form. If it does not recognize your command after a few  
seconds, a voice prompt asks you to “please try again”. If it does not recognize your  
command again, the Command not recognized screen displays “Try again?”. Say or  
touch Yes or No  
.
You must end your current Voice Commands call before you can make another call  
using Voice Commands. To make a 3-way call, only the first call can be made using  
Voice Commands.  
Tools  
117  
Voice Recognition Tips  
Wait for the tone before you speak.  
Speak clearly and at a normal volume.  
There is no need to use paused speech. The voice recognition software has been trained to  
recognize natural speech and performs best when you speak naturally.  
In very noisy environments, it may be helpful to use a headset or a Bluetooth headset.  
Contacts List Voice Activation  
On startup, Nuance Voice Recognition software reads your Contacts list and voice-  
activates all the names.  
When you add or change contacts, the software automatically reloads and voice-  
activates the list.  
Record Audio  
Record Audio allows you to record voice memos. It also allows you to send your  
audio clip to other people as an attachment of an MMS message. Recording time  
varies based on the available memory within the phone.  
1. Touch  
Tools Record Audio.  
Menu  
2. To start recording, touch  
. Record a memo by speaking into the  
microphone.  
3. During the recording process, you can either touch Stop ( ) to stop and  
save the recording or Pause ( ) to temporarily halt the recording. Once the  
audio recording has stopped, the message is automatically saved.  
4. Once stopped, choose from one of the following options:  
• Play  
:
(
)
allows you to play the memo.  
• Record: allows you to save the current memo and begin another session.  
• Send via: allows you to send your voice clip to other people using either a message or to  
a Bluetooth device.  
118  
 
• More: provides these additional functions.  
Delete: allows you to delete the current memo.  
Set as: allows you to set the current recording as Call Ringtone, a Caller Ringtone for a specific  
contact or an Alarm Tone.  
Properties: displays the Name, Format, Size, and so on, of the current recording.  
PWR  
END  
5. To exit, press  
or press  
.
Recorded Audio Folder  
This folder shows a list of audio clips that have been recorded and saved. To access  
this folder, use the following steps:  
Touch  
My folders  
Audio  
Recorded Audio.  
Menu  
Record Audio Settings  
To configure the filename and maximum length for a recording.  
From Idle mode, touch Tools Record Audio Settings.  
Menu  
Alarms  
This feature allows you to name an alarm and set it to ring at a specific time.  
1. Touch Tools Alarms Create Alarm  
The following options display:  
.
Menu  
• Alarm Name: allows you to use a specific name for the alarm. The name appears on the  
display when the alarm activates.  
• Alarm Time: allows you to set the time at which the alarm sounds. Use the Keypad mode  
to adjust the Hour  
,
Minute, and AM/PM values manually or the Wheel mode by using the  
+
(up) or (down) buttons or by quickly sweeping your fingertip over the numbers. Touch  
-
Set to save the new values.  
Note: To change the time format, see “Time and Date” on page 96.  
Tools  
119  
   
• Alarm Repeat: use this option to set the repeating status for the alarm. Touch the box  
next to each day you would like to use for the current alarm. Touch the box next to  
Everyday to select all days. Touch the box next to Once Only to activate the alarm only  
one time at the Alarm Time. Touch Save to save the repeat option.  
• Snooze: use this option to set a Snooze duration (5, 10, 15, 20, or 30 Minutes) and a  
Snooze repeat (1, 2, 3, 5, or 10 Times).  
• Set Details: allows you to modify the following additional features:  
Alarm Type: sets the way in which the alarm sounds when activated (Melody, Vibration,  
Vibration then Melody, Vibration & Melody).  
Alarm Tone: sets the sound file that is played when the alarm is activated.  
Alarm Volume: adjusts the alarm’s volume (1 through 7).  
2. Touch Save to store the alarm details and Save again to store this new event.  
Turning Off an Alarm  
To stop the alarm when it rings, perform one of these steps:  
Press and hold Stop until the alarms stops.  
– or –  
PWR  
END  
Press any key, such as: volume,  
or  
.
– or –  
Press and hold Snooze, if this option is set in the alarm setting.  
Calendar  
The calendar feature allows you to view the Month, Week, and Day layout views. It  
also shows any Missed Alarm Events that have occurred.  
Creating a New Event  
1. Touch  
Tools  
Calendar  
Create.  
Menu  
The Event screen displays.  
120  
 
2. Touch the Title field and use the on-screen keypad to enter a name for this  
specific event. Touch OK to save the new name.  
3. Touch the Start Date field. The Start date screen displays. Use the Keypad  
mode to enter the Month  
,
Day, and Year manually or the Wheel mode by using  
the (up) or (down) buttons or by quickly sweeping your fingertip over the  
+
-
numbers.Touch Set to complete the process.  
4. Touch the Start Time field. The Start time screen displays. Use the Keypad  
mode to enter the Hour  
,
Minute, and AM/PM values manually or the Wheel  
mode by using the (up) or  
+
-
(down) buttons or by quickly sweeping your  
fingertip over the numbers. Touch Set to save the new values.  
Note: In Wheel mode, touching and holding down the + and - keys increases the speed at which  
the numbers scroll through each reel.  
5. Touch the Alarm field and select a time for the alarm to begin alerting you of  
the upcoming event. Touch Save to store the new alert time.  
Choices include: Off, On Time, 30 Minutes before, 1 Hour before, 1 Day before, and 1  
Week before. You can also customize your own defined schedule.  
6. Touch Set Details to configure the following additional parameters for the new  
event:  
• End Date: enter final date for this event to occur. This is useful if the alarm is for a  
repeating event. Touch Set to store the date.  
• End Time: enter final time for this repeating event. Touch Set to store the time.  
• Details: enter a description for this event. Touch OK to store the name.  
• Location: enter a location for this event. Touch OK to store the name.  
• Alarm Tone: allows you to choose an alarm tone. Once highlighted, navigate to Tones and  
select an audio file. Touch  
to assign the file as your new alarm tone.  
Tools  
121  
• Set Holiday: allows you to indicate whether the event is a holiday. Touch On or Off  
.
• Repeat: allows you to set the number of repetitions allowed for this event (Off, Everyday,  
Every Week, Every Month, or Every Year). Once selected, all remaining alarm settings are  
enabled. Touch Save to store the option.  
• Repeat Until: allows you to set as duration for this appointment by assigning an expiration  
date.  
7. Touch Save  
Save to store the new event.  
Viewing an Event  
1. Touch  
Tools  
Calendar  
Event List.  
Menu  
A listing of all upcoming events is displayed.  
2. Touch an event from the Event page to open it.  
PWR  
END  
3. To exit, press  
or press  
.
Deleting an Event  
Touch  
Tools  
Calendar  
Event List  
Delete.  
Menu  
Recent Calls  
The phone stores the numbers of the calls you have dialed, received, or missed in  
the Recent Calls menu. If the number or caller is listed in your Address Book, the  
associated name displays.  
For more information, refer to “Recent Calls” on page 35.  
Memo  
This option allows you to create memos to add to your events.  
1. Touch  
Tools  
Memo  
Create Memo.  
Menu  
2. Use the on-screen keypad to enter a new memo and touch OK  
.
122  
   
Tasks  
This option allows you to create a “to do” entry of tasks, which are created in a  
similar fashion to previously described Calendar entries.  
1. Touch  
Tools  
Tasks  
Create Task.  
Menu  
2. Select any of the following options:  
• Title: enter a title for this task, which can be up to 100 characters.  
• Priority: allows you to assign the task a priority of High, Medium, or Low.  
• Start Date: enter a date for this task to begin.  
• Due Date: enter a date for this task to end.  
• Status: allows you to assign a current project status of Completed or Ongoing.  
3. Touch Set Details to access additional options:  
• Details: enter a detailed description for this task, which can be up to 100 characters.  
• Alarm: allows you to set a time, prior to the event, for the event alerts to begin. Options  
include Off, On Start Date, On Due Date, 1 Day before Starting, 2 Days before Starting, or  
1 Week before Starting. You can also customize an exact date.  
• Alarm Time: enter a time for this alarm to sound. Touch Set to assign the new time.  
• Alarm Tone: allows you to choose an alarm tone. Once selected, navigate to Tones, select  
a file, and touch  
to assign the audio file as the current alarm tone.  
4. Touch Save  
Save to store the new task.  
Calculator  
With this feature, you can use the phone as a calculator. The calculator provides the  
basic arithmetic functions; addition, subtraction, multiplication, and division.  
1. Touch  
Tools  
Calculator.  
Menu  
2. Enter the first number using the on-screen numeric keys.  
3. Enter the operation for your calculation by touching the corresponding on-  
screen arithmetic function key.  
Tools  
123  
   
4. Enter the second number.  
5. To view the result, touch equals (  
Tip Calculator  
=).  
Tip Calculator automatically calculates the following amounts:  
Gratuity (tip)  
Individual payment (for groups)  
Calculations are based on the total amount of the check, a selected percentage, and  
the number of people paying.  
1. Touch  
Tools  
2. Touch the Bill field and use the keypad to enter the total amount of the bill  
and press Result  
3. If needed, touch the Tip field and use the keypad to change the tip percentage  
and press Result  
4. If needed, touch the Split field and use the keypad to change the number of  
persons that are splitting the bill and press Result  
Tip Calculator.  
Menu  
.
.
.
5. The amount of the Tip, the bill Total, and the amount each person should pay  
appear in the lower half of the screen.  
6. Touch Reset to clear the fields and start over.  
Converter  
Your phone comes with a built-in conversion application. This conversion menu  
provides the following conversion categories:  
Currency  
Length  
Weight  
Volume  
124  
   
Area  
Temperature  
1. Touch  
Tools  
Converter  
.
Menu  
2. Select the specific converter function by touching one of the above on-screen  
conversion functions.  
Each converter function has a field for the type of unit to be converted and the type of unit  
to be converted to. An additional field allows you to input the unit amount to convert.  
3. Enter the main value by touching the first on-screen value field (top left of the  
page).  
4. Use the popup keypad to enter the necessary value and touch OK  
.
5. Touch the drop-down list (upper-right) to select the desired source unit. This  
is the value you are converting “from”.  
The resulting converted values (“to”) are automatically displayed in a list.  
6. Touch Reset to erase the current values and begin again.  
PWR  
END  
7. To exit, press  
or press  
.
World Clock  
World Clock allows you to view the time of day or night in other parts of the world.  
World Clock displays time in 100 different cities within all 24 time zones around the  
world.  
1. Touch  
Tools  
World Clock  
Add.  
Menu  
2. Drag the on-screen map to find the desired global region.  
Tools  
125  
   
3. Touch a representative city from a desired area. If the correct city area is then  
highlighted in a different color, your selection was accurately read and you  
can touch OK  
.
– or –  
If not read correctly, repeat the previous two steps until your selection is  
correct.  
4. Touch the sun symbol next to the time to add (On) or remove (Off) Daylight  
Savings Time.  
Timer  
You can use this feature to set a countdown timer. Use a timer to count down to an  
event based on a preset time length of hours, minutes, and seconds.  
1. Touch  
Tools  
Timer.  
Menu  
2. Select a countdown time length for the alert by setting the hours, minutes,  
and seconds value.  
Enter a time length by using either the  
your fingertip over the numbers.  
+
or - buttons or by quickly sliding  
Note: Touching and holding down the + and - keys increases the speed at which the numbers  
scroll through each reel.  
3. Touch Start to begin the timer and touch Stop to pause the timer.  
4. Touch Reset to clear the current timer and display the Timer set screen.  
126  
 
Stopwatch  
You can use this feature to measure intervals of time.  
1. Touch  
Tools  
Stopwatch  
Start.  
Menu  
2. Touch Lap to mark a unit of time per lap. You can record up to 50 lap times.  
3. Touch Stop to stop the stopwatch.  
4. Touch Reset to erase all times recorded.  
Tools  
127  
 

Yamaha EM 203VCD User Manual
Toshiba MK5055GSX User Manual
Toastmaster TCM4RCAN User Manual
Sony Xplod CFD G700CP User Manual
Silicon Image SiliconDrive CF SSD C08G(I) 3150 User Manual
Sanyo Katana II SCP 6650KTB User Manual
Samsung SGH U100 User Manual
Samsung SGH T429 User Manual
Samsung SGH T340G User Manual
Samsung GH68 37099A User Manual