™
Shower CD/Radio
OWNER’S MANUAL
MODELS:
WT51BL, WT51GY, WT51OR,
WT51PB, WT51PL, WT51RD
OPERATING INSTRUCTIONS (Continued)
1. Swivel Hanging Hook. Used to hang unit around shower
head. Fits most standard shower heads. (P/N 10018*)
2. POWER Button. Press to turn the power: ON or OFF.
3. VOLUME Control Buttons. Press to adjust sound level:
UP ( + ) or DOWN ( - ).
4. CD Door.
5. MEMORY (Clock Adjust) Button. Program Setting/Clock or
Timer adjusting.
6. REPEAT/M-UP. In CD Mode: Press to repeat one or all tracks
while CD plays. In RADIO Mode: Press M-UP to select a stored
radio station.
7. MODE Button. Press to change the Display as shown: Radio
Frequency, Clock, Timer, or CD Remaining Time, Clock, Timer.
8. TIMER ON/OFF Button. Press to select Timer function.
9. BAND Select Button. Press to select Radio Band: FM or AM.
10. TUNER Select Button. Press to set the unit to RADIO Mode.
11. CD Select Button. Press to set the unit to CD Mode.
12. LCD Display. Shows various functions in all Modes.
13. PLAY/PAUSE Button. Press to begin CD playing or to pause.
14. STOP Button. Press to stop CD play.
15. TUNING/SKIP/TIMER Buttons (᭤᭤l l᭣᭣). Press to
skip/search ᭤᭤l forward or l᭣᭣ backward while in CD Playing
Mode. Press to search radio station ᭤᭤l upward, or l᭣᭣
downward while in RADIO Mode. Press to select time while
setting Clock or Timer.
16. Latch. Press to open the CD Door.
17. DC Jack. (Input DC 6V, 500 mA)
. Used to connect AC
adapter. (Not included.) Do not use in shower/sauna.
18. EARPHONES Jack. Connect headphones here for private
listening. (Not included.)
19. Battery Door. Unscrew to insert batteries. (P/N 10019*)
20. Mounting Plate Slots. For attaching the Mounting Plate.
21. Slot. For attaching CD/Radio to the Stand.
22. Mounting Plate. Used to mount the unit on the wall.
(P/N 10017*)
*Color reference: BL, GY, OR, PB, PL, RD.
2
™
USING THE WET TUNES STAND
™
TO ATTACH: Lower Wet Tunes
CD/Radio onto Stand pressing it
downward against the Spring
Loaded Bar. Match the Slot on
the Radio with the Hooked Tab
on the Stand, pushing unit
backward and into Slot, then
lifting up slightly until it clicks
into place.
TO RELEASE: Push
downward on the Radio
Slot
and pull it forward
and off of the Stand.
Hooked
Tab
*Color reference:
Stand
(P/N 10020*)
BL, GY, OR,
PB, PL, RD.
Spring Loaded Bar
FRONT PANEL DISPLAY
1.
2.
3.
4.
12.
11.
10. 9. 8.
7.
6.
5.
1. REPEAT. Repeats entire CD.
8. AM Indicator. Lights
REPEAT
when AM band selected.
(flashing). Repeats
current playing track.
9. FM Indicator. Lights
when FM band selected.
2. STEREO. Lights when the
received station is broadcasting
in stereo.
3. CD TRACK Indicator. Flashing
number indicates current CD
track.
10. TRACK/CH. Shows CD
track number and preset
radio station.
11. TIMER ON/OFF. Lights
when setting Timer
function.
4. OVER. Flashes when current CD
track is above the number 10.
12. MEMORY Indicator.
Lights when programming
CD Player and when
5. PLAY. Lights when CD is playing.
6. KHz/MHz Indicator.
7. TIME/STATION. Shows
CD playing time or current
radio station.
presetting radio stations.
3
POWER ON
When battery is connected for the first time or battery has been reinstalled:
1. The LCD Display shows the following:
2. Power ON Button is pressed on, the
unit defaults to TUNER Function, FM band.
Afterward when the Power ON is pressed on, the previously
chosen function will be displayed.
CLOCK SETTING
1. Press MODE Button, to display Clock.
2. Press MEMORY Button, HOUR digit will flash.
Press [᭤᭤l] Forward / [l᭣᭣ ] Backward Button to set the hour on
the Clock, watching for “AM” or “PM.”
AM
PM
3. Press MEMORY Button again, MINUTE digit will flash.
Press [᭤᭤l] / [l᭣᭣ ] Button to set the minute.
AM
PM
4. Press MEMORY Button once more, flashing stops and the
time is set.
NOTE: If Button is not pressed for several seconds, this mode
is released automatically.
TIMER OPERATION
The Timer Function allows you to program the Radio to automatically
turn on/off at a set time.
Timer Setting:
1. Press MODE Button to display the Clock.
2. Press MODE Button again, to set the TIMER ON Indicator flashing,
then press the MEMORY Button until the HOUR digit flashes.
Press [᭤᭤l] / [l᭣᭣ ] Button to select the desired hour.
Press the MEMORY Button again, and the MINUTE digit will flash.
Press the [᭤᭤l] / [l᭣᭣ ] Button to select the desired minute. This
will be the time the CD/Radio will turn on.
4
TIMER OPERATION (Continued)
3. Press MODE Button again, the TIMER OFF is shown:
4. Press the MEMORY Button until the HOUR digit flashes. Press
[᭤᭤l] / [l᭣᭣ ] Button to select the desired hour.
Press the MEMORY Button again, and the MINUTE digit will
flash. Press the [᭤᭤l] / [l᭣᭣ ] Button to select the desired minute.
This will be the time the CD/Radio will turn off.
5. Press MODE Button to return to Display.
NOTE: If Button is not pressed for several seconds, this
mode is released automatically.
TO ACTIVATE TIMER FUNCTION
1. Press MODE Button, the Clock will be displayed:
2. Press TIMER Button, the TIMER Indicator appears on the
LCD Display.
3. The TIMER will turn on the function last used, either the last radio
station will broadcast or the last CD setting will play.
VOLUME CONTROL
Adjust the VOLUME UP ( + ) / DOWN ( - ) Button to a comfortable
listening sound level.
5
RADIO OPERATION
1. Press POWER Button to turn unit on.
2. Press the TUNER Button to select RADIO Mode.
AM
3. Press and release the BAND Button to select desired radio
station (FM/AM).
4. Press and hold the TUNING / SKIP ( ᭤᭤l l᭣᭣ ) Button briefly to
search up and down (Auto Scan) for the next receivable station.
5. Press and release TUNING / SKIP ( ᭤᭤l l᭣᭣ ) Buttons to select
the desired radio station.
RADIO STATION MEMORY PRESETS
You can store up to 20 FM and 20 AM favorite stations in memory.
1. Select the desired radio station as described above.
2. Press MEMORY Button on main unit, MEMORY Indicator flashes
on the LCD Display.
NOTE: If Button is not pressed for several seconds,
MEMORY ENTRY Mode is released automatically.
3. Press M-UP Button to select CH to store station into.
4. Press MEMORY Button again to register.
5. Repeat steps 1 - 4 store additional radio stations.
TO RE-CALL STORED PRESET STATION
1. Press TUNER Button to select RADIO Mode.
2. Press BAND Button to select AM or FM.
3. Press M-UP Button to select desired stored preset station.
6
CD OPERATION
1. Press POWER Button to turn unit ON.
2. Press the CD Button to select CD Mode. Press the
OPEN/CLOSE Button to open the CD Door; insert a CD disc by
gently pressing on the center part of the disc, so that it locks into
place. With the label side facing forward, close the CD Door.
3. Press PLAY/PAUSE ᭤lI Button. The LCD Display will show the
first track number and play time will appear on the LCD Display
and the CD will begin to play.
NOTE: If there is no disc in the CD Compartment and CD
select Button is pressed. The LCD will show “No disc.”
4. Press PLAY/PAUSE ᭤lI Button again to PAUSE playback
temporarily. The LCD Display will show the following:
During PAUSE, the PLAY and playing time will flash. Press it
again to resume playback.
5. Press and release the SKIP ᭤᭤l (Forward) or l᭣᭣ (Backward)
Button to skip forward or backward to the desired track.
NOTE: If batteries are low, it may still play Radio but not CD
Player and Display may show:
Try replacing with fresh, new batteries.
7
MEMORY CD PLAY FUNCTIONS
The CD Player can be programmed to play up to 20 tracks in the
order desired.
1. Press the POWER Button to turn ON, and insert a disc.
2. Before setting, CD PLAY Function should be set to STOP Mode.
3. Press MEMORY Button to select program mode, MEMORY
Indicator appears on the LCD Display and TRACK & MEMORY
Indicator are flashing. The LCD Display shows:
NOTE: If Button is not pressed for several seconds, the
MEMORY PROGRAM Mode is released automatically. If this
occurs before you have completed programming, simply press
MEMORY again to advance to where you left off.
4. Press SKIP ᭤᭤l (Forward) Button to select track number
into memory.
5. Press MEMORY Button to store the track.
6. Repeat steps 4 - 5 to program additional tracks up to a
maximum of 20 tracks.
7. Press PLAY/PAUSE ᭤lI Button to start MEMORY Play. The CD
Player will play back the tracks in the order programmed.
IMPORTANT: If the STOP KEY ( ) is pressed at any time
during Steps 3 - 6 then all memory is cleared.
8
INFORMATION CONCERNING COMPACT DISCS
1. Usable compact discs. Use a compact
disc bearing the mark as shown:
2. Note on handling discs. Removing the
disc from its storage case and loading it.
Press claws at the
center of the case.
Insert with the
label facing up.
Incorrect
• Lift out without touching the recorded surface. Press the disc
gently to insert it.
• Do not touch the rainbow color reflecting recorded surface.
• Do not stick paper or write anything on the label surface.
• Do not bend the disc.
3. Storage. For storage, be sure to return a disc to its case.
• Do not expose discs to direct sunlight, high temperatures such
as from a heater, high humidity, or dusty places.
4. Cleaning a disc. Before operation, wipe off dust, dirt and
fingerprints on the surface with a soft cloth. The disc should be
cleaned from inward to outward. Never use thinner, benzene,
analog record cleaner or anti-static spray.
Correct
Incorrect
From the center
to the edge
NOTE: NEVER PUT YOUR FINGERS INTO THE CD
COMPARTMENT WHEN CLOSING THE CD DOOR.
9
INSTALLATION
WALL MOUNTING WITH ADHESIVE
Adhesive
Bead
1. Select a spot on the wall that is
as smooth as possible, such as
a smooth ceramic tile.
Thoroughly clean the spot of all
DC
soap, oil or other films using a
household cleaning solvent
such as Acetone or nail polish
remover. DO NOT use the tile
cleaner or other wax-based
substances. Allow area to dry
completely. Room temperature
should be at 60 to 70ºF.
Jack
Earphone
Jack
Mounting
Plate
Wall
(P/N
10017*)
2. For best results, hold adhesive tube
(supplied) at a 45-degree angle and apply sealant to Mounting
Plate, approximately 1/8” bead and 1/4” from edges. Use
entire contents. If additional adhesive is required, use silicone
caulking compound or you may order extra adhesive packets.
(P/N 01005)
3. Place Mounting Plate against clean wall surface using enough
pressure to displace air, but not adhesive.
4. Allow adhesive to cure for 24 hours.
5. Slide the Radio onto the secured Mounting Plate.
WALL MOUNTING WITH SCREWS
1. Place Mounting Plate against a
Mounting Plate
(P/N 10017*)
clean wall surface and mark the
spots on the wall where you will
be drilling. Remove the
DC
Jack
Mounting Plate from the wall.
2. Drill 4 holes in the wall that
match the placement of the
holes in the Mounting Plate.
Earphone
Jack
3. Insert a Screw Socket into
each of the 4 holes.
Wall
4. Place Mounting Plate against
the wall in the correct position
and drill in the 4 Screws.
5. Slide the Radio onto the
secured Mounting Plate.
4 Screw 4 Mounting
Sockets
Screws
*Color reference: BL, GY, OR, PB, PL, RD.
10
ONE-YEAR LIMITED WARRANTY
This Salton, Inc. product warranty extends to the original consumer purchaser of the product.
Warranty Duration: This product is warranted to the original consumer purchaser for a
period of one (1) year from the original purchase date.
Warranty Coverage: This product is warranted against defective materials or
workmanship. This warranty is void if the product has been damaged by accident, in
shipment, unreasonable use, misuse, neglect, improper service, commercial use, repairs
by unauthorized personnel or other causes not arising out of defects in materials or
workmanship. This warranty is effective only if the product is purchased and operated in
the USA, and does not extend to any units which have been used in violation of written
instructions furnished by Salton, Inc., or to units which have been altered or modified or
to damage to products or parts thereof which have had the serial number removed,
altered, defaced or rendered illegible.
Warranty Disclaimers: This warranty is in lieu of all warranties expressed or implied and
no representative or person is authorized to assume for Salton, Inc. any other liability in
connection with the sale of our products. There shall be no claims for defects or failure of
performance or product failure under any theory of tort, contract or commercial law including,
but not limited to, negligence, gross negligence, strict liability, breach of warranty and breach of
contract. Some states do not allow the exclusion or limitations of implied warranties or
consequential damages, so the above limitations or exclusions may not apply to you.
Salton, Inc. is not responsible or liable for indirect, special or consequential damages arising out
of or in connections with the use or performance of the product or other damages with respect
to loss of property, or loss of revenues or profit.
Legal Remedies: This warranty gives you specific legal rights, and you may also have other
rights that vary from state to state.
Warranty Performance: During the above one-year warranty period, a product with a
defect will be either repaired or replaced with a reconditioned comparable unit (at Salton,
Inc.’s option) when the product is returned to the Salton, Inc. facility listed below. The
repaired or replacement product will be in warranty for the balance of the one-year
warranty period and an additional one-month period. No charge will be made for such
repair or replacement.
Service and Repair
If service is required, you should first call toll-free 1-800-233-9054 between the hours of
8:00 am and 5:00 pm Central Standard Time and ask for CONSUMER SERVICE. Please refer
to Model WT51 when you call.
In-Warranty Service for a product covered under the warranty period, no charge is made
for service and return postage. Please return the product insured, packaged with
sufficient protection, and postage and insurance prepaid to the address listed below. Call
for return authorization.
Out-of- Warranty Service: There will be charges rendered for repairs made to the product
after the expiration of the aforesaid one (1) year warranty period, after purchaser is
advised appropriately. Include $6.00 (U.S.) for return shipping and handling.
Salton, Inc. cannot assume responsibility for loss or damage during incoming shipment.
For your protection, carefully package the product for shipment and insure it with the
carrier. Be sure to enclose the following items with your unit: any accessories related to
your problem; your full return address and daytime phone number; a note describing the
problem you experienced; a copy of your sales receipt or other proof of purchase to
determine warranty status. C.O.D. shipments cannot be accepted.
Return the appliance to: ATTN: Repair Department, Salton, Inc.
708 South Misouri St. Macon, MO 63552
For more information on Salton, Inc. products, visit our website:
Printed in China
©2001 Salton, Inc.
P/N 60624
|