Sagem MY 302X User Manual

251108518.qxd 19/12/01 9:36 Page 1

MY 302X

MY 304X

IN A FEW WORDS ...

Lock and unlock the keyboard

from the standby screen

Switch on

Press then OK.

Press

Redial last number

Call

Press

twice.

Dial the number then press

Make a call from a number stored

in the directory

Answer

By name: enter the first letter of the name,

Press

press

, scroll down the list to find your

to call.

correspondent, then press

Hang up

By location in the directory: enter the location

Press

number then press to call.

Switch off

Press

(long press).

Hands-free

To communicate, press

Briefly, the functions

MY_304X_EN-00.p65

28/12/01, 11:16

MENUS

Enter using

Validate using OK

Quit or return to the previous

menu using C

Navigate using

and

Services

Directory

Directory menu

Sort by location

Create record

Call groups

4. Menu list

Available memory

Personal numbers

Quit

According to the model of your phone, to the

configuration of the networks and associated

subscriptions, certain functions may not be available

(indicated by *).

Scroll through the names entered 23

See record

Modify

Delete

Call

Send message

Quit

4. Menus

MY_304X_EN-04.p65

04/01/02, 08:37

Double call

Text messages

Activation

De-activation

Status

Access to the SMS

Call services

Call forwarding

All voice calls

Automatic redial

Voice mail number

Local information (*)

Replace “+” prefix (*)

All conditional fwd

Cancel voice forwards

Forward if busy

Forward if no answer

Forward if unavailable

Data forwarding

Faxes forwarding

View last numbers

Options

Ringing and beeps

Volume and choice of music

Call groups

Personalised ringing tone

Create a tune

Vibrate

Vibrate and ring

Vibrate then ring

Inactive vibrate

Only vibrate

Call

Duration and cost of calls (*)

Counters

Delete durations

Costs (*)

Silent mode

Beeps

Keypad beeps

Network beep

Low battery beep

Tones

Delete costs (*)

Display of duration

Display numbers

Anonymous mode

Your number

Callers’ number

4. Menus

MY_304X_EN-04.p65

04/01/02, 08:37

Operator password (*)

Limit incoming calls (*)

Incoming voice calls

Incoming data calls

Incoming fax calls

All incoming calls

Limit outgoing calls (*)

Outgoing voice calls

Outgoing data calls

Outgoing fax calls

All outgoing calls

Pre-set directory (*)

Costs (*)

Controls

Customization

Menus type

Energy saving

Screen Saver

Greeting message (*)

Prog. Key (*)

Select language

Automatic response

Auto. answer

Any key

Network selection

Networks available

Preferred networks

Setting time/date

Display contrast

Currency converter

Rapid exchange

Exchange rate

Settings

Limitation

Accessories

Calculator

Alarm

Timer

Car kit (*)

Data parameters

Currencies

Security

Keyboard locking

PIN number

Modify

Games

Control PIN

PIN2 number (*)

Phone code

Modify

Control phone code

4. Menus

MY_304X_EN-04.p65

04/01/02, 08:37

The number of

5.1 Directory display

telephone numbers

stored in the SIM

card directory varies

depending on the

capacity of the card.

Your Operator or

your Service

Provider can provide

you with this

information.

You can store the telephone

numbers that you call regularly:

•

in the SIM card,

in the phone itself.

Different icons will inform you of the

directory location where the number

is stored when you search for it:

SIM card directory

Your phone’s directory

SIM card pre-set directory.

5. How to use the directory

5.2 Storing a number

It is advisable to

store numbers in

their international

format (+, country

code, and number).

You can verify the

contents of a record

and modify it by

selecting the

In the Directory menu, select

Create record. Validate by

pressing OK.

Enter the name (the number of

accepted characters depends on

the SIM card used). Validate.

required name.

Enter the number including the

area code, if necessary (up to

20 characters). Validate.

5. Directory

MY_304X_EN-05.p65

28/12/01, 11:24

You can enter spaces in the number

(displayed as commas “,”) by

Creating a group

When sorting by

location, pressing on

By default, groups have already been

created in the phone.

pressing (long press) on or #. The

the key launches

figures entered after a space are

a search for the first

available location;

pressing on #

returns to the start

of the list.

processed in a DTMF sequence

(usable after a number).

In order to look up their characteristics,

display a list of the groups - Directory/

Directory menu/Call groups menu.

If necessary, select the call group

to which you want to assign this

number.

Using the scrolling arrows, choose a group

and press OK. You are then able to look up

or alter its characteristics or to erase the

group.

Depending on the available space, you can

select the storage location of the number

entered: SIM card or phone itself.

To create a new group:

Go into Directory/Directory menu/Call

groups.

5.3 Deleting a number

Choose Create group.

To delete the contents of a directory location,

select the name using the scrolling arrows.

Validate by pressing OK. Select Delete, then

validate.

Enter a name and validate.

Choose an icon using the scrolling arrows

and validate.

Choose a ring tone, then choose a

vibrator mode, and validate.

5.4 Call groups

The selection of a call group is made when

entering a number into the directory, or when

modifying a number you have already saved.

You are also able to classify contacts

recorded in the directory into Call Groups.

To each of these groups you attribute certain

characteristics (icon, ringing tone, vibrator,

etc.).

5. Directory

MY_304X_EN-05.p65

28/12/01, 11:25

Activate the Call Groups

function

Looking up a group

If call groups are not

enabled, you cannot

attach correspondents

to groups.

Select the group to be looked up and

press OK.

If you want the characteristics of the

groups to apply to each call:

Choose See group. The screen presents

the name, the icon, and the choice of

vibrator mode of the group.

Go into Directory/Directory

menu/Call groups.

If there are contacts attached to this

group, press the

Choose Activate groups.

key can be used to

view the list of these ones.

Tick the box and validate.

The calls received from contacts who do not

belong to a Call group use the parameters

provided in the Ringing and beeps menu.

Modifying a group

Select the group to be modified, and press

OK.

Available memory

Choose Modify.

Carry out the wanted modifications.

Validate by OK.

To ascertain the number of groups which can

still be created:

Go into Directory/Directory menu/Call

groups.

Deleting a group

Select the group to be deleted, and press

OK.

Choose Available memory.

Choose Delete.

The first number shows the number of

groups which can still be created, and the

second shows the maximum number of

groups.

Confirm by OK.

5. Directory

MY_304X_EN-05.p65

28/12/01, 11:25

5.5 Sorting

5.8 Displaying personal numbers

Using Directory menu/Personal numbers

menu, you can create records for your

own numbers in order to be able to

consult them.

Directory menu enables you to sort the

stored numbers by name or location; for the

latter, the free locations are indicated in the

list.

5.9 Making a call with a stored

number

5.6 Sending a short message to a

stored number

Select the recipient scrolling using the

scrolling arrows and validate using OK.

Select Send message and validate using

OK.

Here are all the ways you can call a

correspondent, whose number you have

saved in the directory, from the standby

screen:

Compose your text message.

1) Enter the first letter(s) of your

correspondent’s name, as you saved it

Press OK. Select Send and validate using

OK. The recipient number is displayed.

into the directory, and then press

Send your message using

key.

The directory list is displayed, with the first

name that corresponds with the letter you

entered at the top. If your correspondent

is not at the top, use the scrolling arrows

to select the name.

5.7 Directory space memory

In Directory menu, select Available

memory. Validate using OK.

Press on

to make the call.

The screen will display the amount of

available space on the SIM card and on

the phone itself.

5. Directory

MY_304X_EN-05.p65

28/12/01, 11:25

2) Enter the number under which you have

saved your correspondent’s details, and

then press on (rapid dial).

3) Enter the number under which you have

saved your correspondent’s details, and

then press on #. Your correspondent’s

number is displayed, at which point you

can modify or add to the number.

Press on

to make the call.

5. Directory

MY_304X_EN-05.p65

28/12/01, 11:25

6.1 Receiving an SMS message

Several types of SMS messages

Access to this

can be received:

service depends on

the network. For

more information,

consult your

Operator or your

Service Provider.

•

text messages

icons for call groups

animated screen savers

melodies

WAP bookmarks.

6. SMS

When you receive an SMS message, a beep

is heard, (the beep selected in the menu

Ringing and beeps/Volume and choice of

music/Messages) a flashing red light

appears and the

icon is displayed on

your phone screen.

This icon remains on screen as long as the

SMS messages have not been read.

When the memory flashes, it is full.

6. SMS

MY_304X_EN-06.p65

28/12/01, 11:26

The receipt of icons, animated

screen savers or melodies can take

several minutes. Messages inform

you of the downloading progress.

This symbol indicates that an SMS

message has been altered: it

consists of several fragments, some

of which have been deleted.

Ask your Operator

about the down-

loading of SMS

icons, animated

screen savers or

melodies.

You can hide that screen at any

time by pressing (e.g. to make a

call or access other information on

your phone) or delete the download

Meaning of the symbols in front of each

SMS message

Call group icons

Animated screen savers

Text messages

Melodies.

Unread SMS

messages are in

bold.

in progress by pressing

Go into the Text messages menu to

access the list of messages

received.

Actions possible on an SMS message

received

Meaning of the symbols at the top of the

screen

Select an SMS message.

This symbol indicates a written text

message. If this symbol is flashing,

it means that the SMS message has

not been sent.

By pressing

, you can:

• read an SMS text message

• view and save an SMS icon or

animated screen saver

This symbol indicates an SMS

message received. If this symbol is

flashing, it means that the SMS

message has not been read yet.

• listen to and save an SMS melody.

When you press (Options), various

options are available according to the type

of SMS message received:

This symbol indicates an SMS

message which is incomplete or in

the process of being downloaded.

• read it

• delete it

6. SMS

MY_304X_EN-06.p65

28/12/01, 11:26

•

Saving a melody in your phone

Warning

forward it to another person

consult the available memory

A melody is saved in the Ringing

and beeps/Personalised ringing

tone menu.

Only the screen

savers and melodies

without Copyright

may be forwarded to

another person and

depending on model.

You must listen to

the entire melody in

order to be able to

save it.

delete all SMS messages

already read

delete all SMS messages

choose a sending option

enter the number of the

messaging centre

add a WAP bookmark (see

below)

If you have just listened to it,

•

press

(Record)

Select it in the list and choose the Save

option by pressing (Options).

•

The space required as well as the space

available in the phone are indicated.

save it in your phone (SMS

melody, animated screen

saver and icon (see below)).

If the maximum number of melodies or the

maximum capacity has been reached, you

will be asked if you wish to delete some

melodies or replace an existing melody with

the new one.

Adding a WAP bookmark in your

phone

To add a WAP bookmark received:

This sign placed in front of a melody

indicates that it can be deleted and

will free enough memory space to

save the new one.

If you have just read it, choose

the Add WAP bookmark option

by pressing (Options)

This sign placed in front of a melody

indicates that it can be deleted but

will not free enough memory space

to save the new one.

Select it in the list and choose

the Add WAP bookmark option

by pressing (Options).

6. SMS

MY_304X_EN-06.p65

28/12/01, 11:26

Saving an animated screen saver on your

phone

Select it in the list and choose the Save

option by pressing (Options).

An animated screen saver is saved

in the Controls/Customization/

Screen Saver menu.

The space required as well as the space

available in the phone are indicated.

Warning

You must view the

entire screen saver

in order to be able to

save it.

If the maximum number of icons or the

maximum capacity has been reached, you

will be asked if you wish to delete some

icons or replace an existing one with the new

one.

If you have just viewed it, press

(Record)

Select it in the list and choose the Save

option by pressing (Options).

6.2 Editing a message using

Easy Message T9™

The space required as well as the space

available in the phone are indicated.

T9™ mode is

If the maximum number of animated screen

savers or the maximum capacity has been

reached, you will be asked if you wish to

delete some animated screen savers or

replace an existing one with the new one.

activated as soon as

you create or modify

a message.

The Easy Message T9™ function

helps you to easily enter short

messages.

Select the Text messages/Write

new... menu and press OK.

Language

Saving an icon in your phone

By default, the

Selecting the editing language

language used is that

which is activated on

the phone’s menu

display (or English if

a language not

supported by Easy

Message T9™ is

selected in the

An icon is saved in the menu Ringing and

beeps/Call groups/Call groups menu.

Validate T9 by pressing the

key. Select using the scrolling

arrows, the language required

and validate by pressing OK.

If you have just viewed the icon, press

(Record)

menu).

6. SMS

MY_304X_EN-06.p65

28/12/01, 11:26

Using T9 mode

Additional entry modes

Press the key corresponding to the letter

required, compose the word by continuing

to press the keys corresponding to the

different letters, without worrying about the

display, until the whole word is entered: it

will appear in negative, white on black.

The key

selects one mode or another.

The 123 mode inserts numbers.

The Insert symbol mode displays a list of

symbols and the figures from 0 to 9 that

correspond to them.

To enter a symbol, simply type the number

that appears above the character

required, for example: 6 for ?. The symbol

is inserted into the text and you return

automatically to Easy Message T9™

mode. Several lists are accessible using

the scrolling arrows.

If the word proposed corresponds to the

one you are looking for, press 0 to validate

it, create a space and go on to the next

word.

It is possible that there are

several words in the dictionary

As you go along,

that contain the same sequence

of keys pressed. If the word that

appears is not the one you want,

press @ to scroll through the

words present in the dictionary,

corresponding to this sequence of

keys. When you find the word you

want, press 0 to validate, type a

space and go on to the next word.

depending on the

keys pressed, the

software looks in a

dictionary for the

corresponding words

that are most

The ABC mode enters words that do not

exist in the dictionary or in another

language. To obtain a letter, hold down the

corresponding key. The letters and

numbers scroll. Release the key when the

required letter appears.

frequently used.

Capital letters

You can type capital letters, by pressing

If the word that you want does not appear

in the dictionary, several additional modes

allow you to vary the nature of the words

entered.

the key before entering the relevant

character. The following characters will

automatically return to lowercase.

6. SMS

MY_304X_EN-06.p65

28/12/01, 11:26

Words in capital letters

After validating your text, you can choose

one of the following options:

You can also choose to type a whole word

in capital letters by pressing twice on the

•

Send your message

Store your message

De-activate Zoom

Cancel.

key before entering the word. It is

possible to return to lower case mode by

pressing once on the key.

Punctuation marks

Punctuation marks are obtained by using

either the 1 key (except in numeric mode),

or using the Insert symbols mode (quick

access using # key).

6.3 Edited messages

Pressing the key (Options), different

options are available for an edited message:

Accented characters

•

read it

The number of

messages stored in

the SIM card

changes depending

on the SIM card

capacity; contact

Accented characters are

send it

automatically generated in the

word in Easy Message T9™

mode. In ABC mode, you need to

wait for the accented character to

be displayed whilst holding down your Operator or

the corresponding key.

delete it

modify it

view the memory occupation level

delete them all

your Service

Provider. for further

information.

select a send option (acknowledgement,

reply given, period of validity, message

format)

•

enter the message centre number.

6. SMS

MY_304X_EN-06.p65

28/12/01, 11:26

Look out for

7.1 Forwarding calls

Forwarding voice calls

incompatibilities; for

more information,

consult your

Depending on your subscription, this

service allows you to transfer

incoming calls to another number or

a mailbox.

Operator or your

Service Provider.

Scroll through the menu to activate the

type of forwarding that you require:

•Forward all voice calls: all incoming

calls are forwarded to a number you

define

7. How to use the call

related features

•Forward all conditional calls

•Forward calls when your line is busy

•Forward calls when there is no answer

on your extension after a period that

you can define by answering the

questions on the menu

•Forward calls when your phone is

unavailable, outside of network

coverage or switched off.

Enter the number to which you want to

forward your calls. If necessary, include

the area code you would use if you were

calling the number from your phone.

7. Call related features

MY_304X_EN-07.p65

28/12/01, 11:27

Validate by pressing

The forwarding

number to the

messaging centre

depends on the

subscription type.

7.2 Viewing the list of the last

numbers used

A message on the screen

confirms that forwarding has

been activated.

You can consult the list of the last

numbers used (outgoing and

incoming if available).

Several options are

available for this

number: store it in

your directory, send

it a short message,

delete it. You can

also delete the

You can also cancel all types of

forwarding.

Warning

You can view the status of a type

of call forwarding in order to

verify whether it is active or not.

This function is also useful for

controlling the number to which

your calls are forwarded. The

information supplied is provided

by the network.

To redial a number:

Cancellations of

forwarding can

cause particular

reactions in certain

networks.

Select from the list using the

scrolling arrows.

whole list of

numbers.

Make the call by pressing on

Shortcut

From the standby screen, press on

Forwarding data or faxes

For services specific

to a network, such

as mailboxes, short

dialling is only valid

when covered by the

particular network.

You may possibly

prefer an

international number.

This memory is

linked to the phone

and not to the SIM

card.

Depending on your subscription,

this service permits you to transfer

data or faxes that are addressed to

you to another number.

7.3 Monitoring the duration and

cost of calls (*)

On the Counters menu you can view the

duration of the last call and all calls made

since the last deletion.

You can activate the data or faxes

forwarding service, to enter the

required number, cancel it and view

the status of the service.

The Delete durations menu enables you

to delete the duration of the last call and

reset to zero the total calls counter.

7. Call related features

MY_304X_EN-07.p65

28/12/01, 11:27

On the Costs (*) menu you can

view the cost of the last call and

all calls made since the last

deletion.

•

Yes: you wish to use the anonymous

mode and the person you are calling

cannot know your number.

This data is purely

indicative and does

not represent proof.

The metering criteria

for the network can

be appreciably

Your number

The Delete costs (*) menu

enables you to clear the cost of

the last call and to reset the call

counter after entering your PIN2

code.

•On outgoing calls you can check that your

phone number is displayed on the phone

of the person you are calling (CLIR).

different (indivisible

minutes, etc.).

•On incoming calls, you can check that the

telephone number of a phone to which you

are transferring calls will appear on the

The Display of duration menu enables

you to select the duration display during a

call.

phone of a person calling you (COLR).

Callers Number

7.4 Displaying the numbers

•On outgoing calls, you can see the phone

number to which your call is being

transferred (COLP) if the person you are

calling has authorised his or her identity to

be displayed by deactivating the COLR

option.

This menu permits you to see the status of

the display numbers function for:

•your identity (phone number)

•the identity of the person calling you.

•On incoming calls, when it is activated,

this function displays on your phone the

phone number of the person calling

(CLIP). This function is only possible if the

caller has authorised his identity to be

displayed by deactivating his CLIR option.

Anonymous mode

You can decide whether the person you are

calling is given your phone number or not.

• Preset: the phone network default mode.

• No: you do not wish to use the

anonymous mode and the person you are

calling will know your number.

7. Call related features

MY_304X_EN-07.p65

28/12/01, 11:27

Call waiting

7.5 Authorising double call

7.8 Local information distribution

You can activate,

deactivate and view

the status of the call

waiting service in

order to check

(Service depending on the operator)

This menu allows you to activate

and select reception of information

distributed by the network.

Contact your

operator for further

details)

During a call, a special tone can

inform you that another caller is

trying to reach you. The caller’s

number - and name, if stored - is

displayed on the screen.

whether it is active

or not.

7.9 Replacing the international

prefix

During a call, when pressing the @ key, the

key changes function and gives access to

different possibilities of actions with this call.

(Depending on model)

In the event that a call is not possible with

the “+” prefix, you have the option of

choosing a replacement prefix with no need

to change the number(s) already recorded

with the prefix + in the directory.

7.6 Configuring automatic redial

You can activate automatic redial either by

default or on demand.

7.10 Placing calls on hold

7.7 Voice mail number

(Service depending on the operator)

To program a special permanent call number,

type in this number and validate.

During a call, you can put the

current call on hold by pressing Ok.

Warning

This number is used when calling the voice

mail centre with the programmable keys.

In this case,

pressing

calls.

During a call, when pressing the @

key, the key changes function and

enables you to access different

ends all

options for the call.

7. Call related features

MY_304X_EN-07.p65

28/12/01, 11:27

1 X

End the current call order number

7.11 Multi-conferencing (*)

Place on hold the current call (or

multi-conference calls) and accept

the call holding or waiting (or

multi-conference calls).

(Service depending on the operator

and depending on model)

Multi-conferencing

enables you to talk

to several callers

(depending on the

network capacity

and on the model).

A multi-conference is limited to 6

participants: 5 in a multi-conference

and one additional call

2 X

Place on hold the multi-

conference calls except for the

current call order number X

(private call).

During a call, when pressing the @

key, the key changes function and gives

access to different possibilities of actions

with this call.

Add a call holding (or multi-

conference calls) to the current

call (or to the multi-conference).

Standard commands

Tel N°

Place on hold the current call (or

the multi-conference calls) and

call another phone number.

Sequences of standard keys also permit

access to services such as call notification,

call holding, multi-conferencing, and open up

additional possibilities:

If you use this feature, we recommend that

you first place the current caller on hold,

then dial the new number as a courtesy to

your caller and to ensure privacy with the

Reject a call holding or waiting (or

multi-conference calls).

other party if desired.

End the current call holding or

waiting (or the multi-conference

calls if there are any) and accept

the call (or multi-conference

calls).

End all calls except for a possible

call waiting.

7. Call related features

MY_304X_EN-07.p65

28/12/01, 11:27

8.1 Selecting the volume and

the type of ringing tone

You can set your phone to ring on

receiving calls and/or short

messages.

There are numerous

tunes available

(including a «silent

ringing tone») and

several volume

levels including a

crescendo.

You can, during adjustment,

listen to the melody selected or

not: activate or don’t by pressing

@; the symbol appears barred

or not.

Select the ringing tone required

using the scrolling arrows.

8. How to adjust the ringing

tones and the vibrator

Press

to move on to the next

section.

Select the volume required for using the

phone with the scrolling arrows (from 1 to

4 and + for the volume crescendo) and

validate using OK.

Press

to move on to the next section.

Select the volume required for using the

hands free car or pedestrian kit with the

scrolling arrows (from 1 to 4 and + for the

volume crescendo) and validate using OK.

8. Ringing tones and vibrator

MY_304X_EN-08.p65

28/12/01, 11:28

If you have saved melodies received by

SMS (see SMS chapter), they will appear in

that menu.

8.2 Call groups

See chapter How to use the directory for all

the functions about call groups.

You can then modify it (if the copyright

allows it), listen to it or select one of the

following options:

Downloaded icons

If you have saved icons received by SMS

(see SMS chapter), they will appear in the

menu Ringing and beeps/Call groups/Call

groups menu.

•

change its title

send it by SMS to another person (if it is

not Copyright protected)

•

consult its memory capacity

consult the available memory

delete the selected melody

delete all melodies.

If you select an icon in the list, it will appear

at the top of the screen.

You can then delete it or select one of the

following options:

• change its title

8.4 Setting the vibrator

• consult the available memory

• delete the selected icon

• delete all saved icons.

Wherever you require your calls to arrive

discreetly, you can use the vibrator or select

the silent mode.

Using the scrolling keys, select one of the

following options: inactive vibrate, only

vibrate, vibrate and ring, vibrate then ring.

8.3 Personalising the ringing tone

You have the option of creating a

personalised call tune. A help menu,

Validate by pressing

accessible by pressing

, will guide you.

8. Ringing tones and vibrator

MY_304X_EN-08.p65

28/12/01, 11:28

Setting the low battery tone

8.5 Selecting silent mode

If you want your phone to give a warning

beep when your battery is low:

If you want the ringing tone of your

phone to be replaced by the vibrator

and the beeps to be suppressed

(except for the alarm tone), tick the

box and validate by pressing OK.

Silent mode is

automatically

Tick the box and validate by pressing OK.

deactivated when

the hands free kit

car is connected as

well as when the

phone is switched

on/off.

8.7 Deleting DTMF tones

This mode is indicated by the

symbol on the screen saver.

(Depending on model)

You can delete the emission of DTMF tones

during a call. You can thus make a call, in a

comfortable and discreet way for you caller.

8.6 Setting the beeps

To be discreet, clear the selection from the

box. Validate by pressing OK.

Different controls are available:

You can select the

tones produced by

your keypad: Beep,

DTMF (musical

keys) or non active

tones (in this last

case, when you

press your

Setting the keypad tones

Select the tone required using

the scrolling arrows and validate

(press

Setting the network tone

keyboard, it does not

make a noise).

If you want your phone to give a

warning beep when it locates a

network on which it can

communicate:

Tick the box and validate by

pressing OK.

8. Ringing tones and vibrator

MY_304X_EN-08.p65

28/12/01, 11:28

9.1 Customizing your phone

Menus type

You have the option of personalising the

presentation of the menus, and so of limiting

access to certain functions.

Three levels are available:

Expert: presents all of the functions

Essential: presents the main functions

Restricted: limits access to certain

functions.

9. How to adjust and

customize your phone

Installing the energy saving mode

In order not to use the phone’s screen light

and thereby increase its operating time:

In the Customization/Energy saving

menu, check No light and press OK to

validate.

9. Phone adjustment

MY_304X_EN-09.p65

28/12/01, 11:29

•

consult its memory capacity

consult the available memory

delete the selected screen

delete all screens.

Configuring the idle mode

You can choose between an animated idle

screen or the economy mode.

In the Customization/Screen Saver

menu, use the scrolling arrows to select

the animation you want, a text, a banner

or the economy mode.

Personalising the welcome screen

Depending on model

Press

to access the setting of the

You can personalise the welcome screen of

your phone by typing a text. Validate by

pressing OK.

animation or economy mode activation

interval.

Press OK to validate.

Customizing the programmable keys

To exit the economy mode, press

Depending on model

The action allocated

If you have saved animated screen

savers received by SMS (see SMS

chapter), they will appear in that

menu.

This menu, accessible directly by a

short press on a programmable key

from the standby screen, enables

to a programmable

key is triggered by a

long press or two

short presses only

from the standby

screen.

The frequency of

display of the screen

saver has a direct

impact on the

phone's operating

capacity. For optimal

operating capacity,

set the maximum

interval.

you to configure the and

keys.

There are different possibilities for

each of the keys:

The following options are available

according to the type of screen:

Directory

• validate the animated screen

savers as default screen

Validate Directory.

When you press the key, you can see the

names in the directory.

• change its title (only downloaded

screens)

9. Phone adjustment

MY_304X_EN-09.p65

28/12/01, 11:29

Rapid dial

9.2 Selecting the display language

Select a name from the directory and

validate. When you press the key, you will

automatically call the name selected.

You can select the language in which you

wish your phone display to operate:

Automatic selection.

Silent mode

The display language will be that of

your SIM card (if available).

Validate Silent mode.

This mode, indicated

on the screen saver,

is automatically

deactivated/

activated when the

hands free kit is

connected.

The ringing tone of your phone

will be replaced automatically by

the vibrator and all the beeps will

be suppressed (except for the

alarm).

otherwise select the language of your

choice using the scrolling arrows and

validate by pressig OK.

9.3 Select the type of response

Call voice mail

Validate Call voice mail.

When you press the key you will

You can reply to a telephone call:

either automatically, if you have ticked

the Automatic ans. box (for a hands

free kit) and validated by pressing OK.

automatically call your mailbox number.

Text messages

Validate Text messages.

or by pressing any numeric key if you

have ticked the Any key and validated

by pressing OK.

When you press the key you can read the

short messages stored in the SIM card or

in the phone itself.

View calls

Validate View calls

When you press the key, you can view the

list of the last calls made and received if

available.

9. Phone adjustment

MY_304X_EN-09.p65

28/12/01, 11:29

Network

Available networks

Depending on

9.4 Selecting the network

model, you can

choose a manual

selection for a

network search. A

triangle appears in

the antenna above

the network icon to

indicate the manual

search.

This menu enables you to start a

search for all available networks at

the present location and to display

them.

When your home

network is not

Every SIM subscription card can

store an ordered list of preferred

networks.

accessible (abroad,

for example), your

phone automatically

searches for another

available and

authorised network

in the order of

preference indicated

by the list on the

SIM card.

If the list has not been

Use the scrolling arrows to scroll

the available networks and

validate the one wanted (press

programmed, or if none of the

networks on the list are available

or authorised, the phone

searches for an authorised

network providing the highest

level of signal.

Preferred networks

To program a list of preferred

networks into your SIM card:

If none of the available network

is authorized, you can use your

phone to make emergency calls

only until a network connection

can be re-established.

Use the scrolling arrows to select

from the list.

Validate.

If the network is not on the list,

select the country code then the

network code (ask the organisation

from which you obtained the SIM

card).

If no network is available, your

phone continues to search for

one.

In all cases, the phone searches

for its home network first.

9. Phone adjustment

MY_304X_EN-09.p65

28/12/01, 11:29

Rapid exchange

9.5 Setting the time and date

If you tick the Rapid exchange

box, the converter will operate on the

standby screen, enter the digits required

and use the scrolling arrows to perform a

conversion.

Setting time/date/Control menu

Set the hours and minutes by pressing on

the corresponding numbers or by scrolling

through the values using the

arrows.

Exchange rate

Press

to go to the next setting.

Enter the conversion rate corresponding

to the two selected currencies.

Set the day, month and year.

Press OK to validate.

Currencies

Setting time/date/Display menu

Enter the symbols of the two currencies to

convert. A long press on C returns to the

beginning of the line to enter them (if the

symbols are already entered).

Use the scrolling arrows to select the type

of clock to be displayed on the screen or

to display no clock. Press OK to validate.

9.6 Controlling screen contrast

Control screen contrast using the scrolling

arrows, and validate by pressing OK.

9.7 Converting currencies

This menu enables you to convert one

currency into another. Using the scrolling

arrows, you can select:

9. Phone adjustment

MY_304X_EN-09.p65

28/12/01, 11:29

Locked keyboard

10.1 Locking the keyboard

You can still make

emergency calls and

answer calls.

This menu enables you to lock your

phone’s keyboard to prevent calls from

being made unintentionally in your bag

or pocket.

Tick the Lock box: the keyboard will

automatically be locked.

For a quick keypad

To unlock your keyboard:

locking, press

Press then OK.

then OK from the

After unlocking, the keyboard will be

standby screen.

locked after a certain period.

10.How to use the security

features of your phone

Warning

10.2 Changing the PIN

number

If the wrong PIN

code is entered three

times in a row, the

card will be locked.

To unlock your card,

call the organisation

which issued your

card for guidance in

unlocking it.

You can change your PIN number:

To the question: Old pin

number ?, enter your old PIN

code and validate (press

To the question: New pin

number ?, enter your new PIN

code (a number between 4 and 8

digits) and validate by pressing

OK.

If your SIM card is

permanently locked,

contact your

Operator or your

Service Provider to

obtain a new card.

10. Security

MY_304X_EN-10.p65

28/12/01, 11:30

To the question: Verify pin number ?,

enter your new PIN code a second time to

verify and validate by pressing OK.

If the incorrect code is entered, the

time interval between each attempt

increases, making use impossible.

The phone code is a

secret code,

intended to protect

the phone in the

event of theft. It is

linked automatically

to the SIM card

present on

To change the phone code, you

must first check that it is active

(Control phone code menu).

Checking the PIN number

You can activate your PIN number so that it

is requested and checked every time the

phone is switched on, so that if the phone is

lost or stolen, your SIM card cannot be used:

To activate:

activation.

To the question: Phone code?,

To the question: Pin number ?: enter your

enter 0000 and validate (press

PIN number and validate (press

Tick the Telephone contr box and validate

Tick the box Pin number cont and

by pressing OK.

validate by pressing OK.

To deactivate:

To the question: Phone code?, enter your

code (possibly changed) and validate

10.3 Changing the PIN2 number (*)

(press

You have a second PIN number. The

procedure for modifying the PIN2 number is

identical to that for the PIN number.

Do not tick the Telephone contr box and

validate by pressing OK: it will reset the

code to 0000.

10.4 Changing the phone code

Once the phone code is activated, you can

modify it:

The phone code menu enables you to

activate the phone code so that it is

requested and checked each time the phone

is switched on, in the case of a different SIM

card being used.

To the question: Old phone code?, enter

your old phone code and validate (press

10. Security

MY_304X_EN-10.p65

28/12/01, 11:30

To the question: New phone code? enter

your new phone code (a number of

between 4 and 8 digits) and validate by

pressing OK.

You can activate, deactivate, and

view the status of the type of call

barring. You can also cancel ALL incoming calls or to

The restriction can

apply to ALL

incoming calls when

you are not in your

home country (if you

types of barring.

To the question: Verify phone code enter

your new phone code a second time to

verify it and validate by pressing OK.

have roaming).

10.7 Limiting outgoing calls

(*)

10.5 Changing the operator

password (*)

Depending on your subscription, this

service stops certain types of

outgoing calls being made from your

phone.

Access to this

service depends on

your subscription

type. For more

information contact

your Operator or

Service Provider.

You have an operator password. The

procedure for modifying this password is

identical to that for your PIN code.

If you have this service, you will

have been provided with a

password when you subscribed.

This password is necessary to

activate this function.

10.6 Limiting incoming calls (*)

The restriction can

apply to ALL

outgoing calls, to all

your

INTERNATIONAL

outgoing calls or to

outgoing

international calls

EXCEPT those sent

to your HOME

country.

Depending on your subscription, this

service enables you to restrict

certain types of incoming calls.

You can activate, deactivate, and

view the status of the type of call

barring. You can also cancel ALL

types of barring.

Access to this

service depends on

your subscription

type. For more

information contact

your Operator or

Service Provider.

If you have this service, you will

have been provided with a

password when you subscribed.

This password is necessary to

activate this function.

10. Security

MY_304X_EN-10.p65

28/12/01, 11:30

Currency: enter the currency

name (maximum 3 characters)

and charge per unit. Ask your

operator for this value.

Warning

10.8 Setting up the pre-set

directory (*)

These functions

depend on the ability

of the network to

send charge data to

your phone in real

time, and on the

The pre-set directory allows you to

limit calls. When you activate this

directory, only the numbers you

store in this directory can be called.

This directory is

linked to the SIM

card. Thus, its size

is determined by

limitations of this

card.

Telephone unit.

The Limitation menu allows you to

activate the credit function in the

selected currency after entering your

PIN2 code.

capacity or options

on your SIM card.

Before creating it, you must first

activate it:

Display the Pre-set directory

menu.

Enter your PIN2 number.

Tick the Pre-set directory box.

Validate by pressing OK.

To create the pre-set directory,

proceed as you would proceed for

another directory (see chapter How

to use the Directory/Storing a

number).

10.9 Charge checking (*)

The Settings menu allows you to

select the type of charge indication

after entering your PIN2 code:

10. Security

MY_304X_EN-10.p65

28/12/01, 11:30

11.1 Calculator

You can operate the calculator using the following

keys:

Add

Subtract

Multiply

Divide

Equals

Delete

11.Other functions

Long press on:

or # or @ or

Decimal point

Monetary operations if

there is no calculation in

progress

(See chapter Phone

adjustment, § 9.7).

Monetary conversion.

From the standby screen, you can convert a

currency into another according to the settings

chosen (calculator key

) or menu (Controls/

Currency converter).

11. Other functions

MY_304X_EN-11.p65

28/12/01, 11:34

The alarm function

is represented on

the screen by the

11.2 Setting the alarm

11.4 Configure your phone with a car kit

To use your phone as an alarm

clock:

(Depending on the model)

To use your phone

with a hands free kit,

see the notes

symbol

As regards the phone, there are

several options:

Permanent flashing

of this symbol

Using the numbers or the

scrolling arrows, set the alarm

time.

supplied with the kit.

indicates that an

alarm time has been

programmed but the

date and time clock

has not been

Programming the switch-off delay

on your phone

Press

to go to the next item.

Set the phone off delay using the

numbers or scrolling arrows.

Set the minutes.

This delay starts

counting down as

soon as the end of a

call is detected.

initialised.

Tick the box and validate by

pressing OK.

Press

to go to the next item.

Tick the box and validate by

The ringer is stopped by pressing any key;

the alarm remains programmed.

pressing OK.

Programming the alarm timing

This can only

happen when the

vehicle is not

running.

The alarm function remains active when the

phone is switched off. It is not affected by

silent mode.

You can be notified that your phone

is ringing when you are not in your

car.

Set the delay after which an external warning is

set off using the digits or scrolling arrows.

11.3 Setting the timer

Tick the box and validate by pressing OK.

The same procedure is applied as for the

alarm function, but in this case you start a

time clock running against a defined value.

The phone must remain switched on.

11.5 Data parameters

You can set the serial link speed when using AT

commands.

11. Other functions

MY_304X_EN-11.p65

28/12/01, 11:35

From the standby screen, press on

the @ key to access the local menu

for WAP functions.

Depending on

model, scrolling

menu 0 allows you

to access the WAP

function.

Home: connection to the home

page.

Bookmarks (depending on model):

from the standby screen, following a

number key with the @ key initiates

access to the favourite

This menu enables

you to record a

directory of Internet

site names and

addresses for easy

and fast access.

corresponding with the number.

You can receive bookmarks by SMS

and add them to this list (see SMS chapter).

You can also send some by SMS: select a

bookmark, press (Options), then select

Send by SMS.

12.WAP Function

Mobile Internet

Go to URL (depending on model): this menu

enables you to directly enter an Internet

address.

WAP: Wireless Application Protocol – This is a protocol which converts Internet

language into the language which can be understood by a mobile telephone.

The WAP browser is licensed from:

Advanced...: access to the sub-menus:

•

Connection settings which allow

you to set the parameters for

several access providers

(depending on model). The

current access service has a star

in front of it.

All of the information

to be entered in the

settings is supplied

by your Operator or

Service Provider.

The WAP browser remains the exclusive property of Phone.com. It is therefore

highly prohibited to modify, translate, reverse engineer, de-compile or

disassemble the Phone.com browser or any part thereof.

12. WAP Function

MY_304X_EN-12.p65

28/12/01, 11:36

Configuration of WAP parameters

•

FastW@p (depending on model) which

provides quicker access to the pages of

Internet sites.

Select the desired access service using

the scrolling arrows then press on

Modify ( key).

Reset cache: empties data stored from

previous connections.

The parameters to be entered are:

the name of the service,

a user name,

Quit: return to the phone standby screen.

a password,

The q icon enables you, by pressing the @

key, to access two display modification

possibilities:

the IP address of the WAP gateway:

enter the IP number using the @ key

(Next) then choose Secure or Non

secure,

the zoom to change the size of characters by

pressing on successively

the call number,

the access mode (digital or analog).

full screen display by pressing on

Once all the parameters entered, you

can activate the selected service.

Confirm your choice with OK.

Connection

When connecting on

the GSM network,

the @ character

flashes, and the cost

of communications

starts to clock up as

soon as it stops

flashing.

From the Home menu, start up

connection to a service.

• Show URL which presents the current

Internet address.

Once connected to a service,

press on q then [Menu] to return

to the local menu.

• Disconnect which ends the communication

(allows a navigation whithout being

connected).

• Linger timer enables you to set a time

limit, after which the phone will disconnect

automatically if you have forgotten to

disconnect from a service.

12. WAP Function

MY_304X_EN-12.p65

28/12/01, 11:36

Disconnection

You will be automa-

tically disconnected

after a short pause if

you have forgotten

to disconnect from a

service.

Disconnection is achieved by

pressing on q then [Menu] and

then by using the Advanced...

menu and Disconnect.

The @ character disappears

from the screen.

Exit from the WAP function

To exit from the browser and end

the current communication (if

necessary):

press

from the local menu, select Quit

and validate by pressing OK.

12. WAP Function

MY_304X_EN-12.p65

28/12/01, 11:36

Depending on the model, several games are

available. The presentation menu guides you

on how to best use them.

13.Games

13. Games

MY_304X_EN-13.p65

28/12/01, 11:37

Depending on the model,

different accessories are

available on your phone:

Warning

Do not connect/

disconnect the

special socket on

your phone during a

call.

The use of the

EXTERNAL SIGNAL

function to activate

the lights on a

vehicle or the horn,

in order to take a

call on a public road,

may not be

•

Additional batteries

Additional chargers

Desk charger

Cigarette lighter adapter

Hands-free kits

Coloured front panels.

14.Available accessories

authorised.

14. Available accessories

MY_304X_EN-14.p65

28/12/01, 11:37

Upkeep

Warning

Clean your phone using a soft

slightly damp non fluffy cloth.

Certain chemical

products can

damage plastic. Do

not use aerosols,

certain special

Battery

cleaning products,

corrosive products,

solvents, alcohol

and detergents.

After a long period of non use

(several months), when the charger

is being connected, the unit might

not switch on.

In this case:

15.Upkeep

Disconnect the charger, wait a

few seconds, and plug it in again.

It may be necessary to repeat

this several times.

Maintenance menu

This menu contains information that

you could be asked for to perform

specific operations. If they are

rquired, you will be shown how to

find information you need.

15. Upkeep

MY_304X_EN-15.p65

28/12/01, 11:38

The use of your phone is controlled

by safety regulations intended to

protect both the user and his/her

environment.

CE marking on the

unit conforms to

directives 1999/5/

EC, 89/336/CEE

and 73/23/CEE.

Electrical safety

Only use the appropriate chargers

contained in the manufacturer’s

catalogue. Using another charger

could be dangerous and will

invalidate the manufacturer’s

warranty.

16.Recommendations

The main plug socket must be

easily accessible.

The main voltage should

correspond to that given on the

manufacturer’s plate on the

charger.

16. Recommendations

MY_304X_EN-16.p65

28/12/01, 11:39

The phone must be shielded

sufficiently from electronic

equipment in the vehicle. It gives off

micro-waves, which may affect the

operation of such equipment.

Warning

Airplane safety

Ensure that no part

of your body is

permanently close to

the aerial unless

there is a metal

screen (e.g.: a

In an airplane, your phone must be switched

off to ensure that it does not interfere with

the planes systems. Its use is illegal and you

could be prosecuted or banned from using

cellular networks in the future if you do not

abide by these regulations.

•

Installation of your phone in a

vehicle must only be performed

by qualified personnel.

vehicle roof, ꢀ).

Non ionising radiation

Areas containing combustibles

•

To obtain maximum satisfaction from your

It is advisable to switch your phone off in the

vicinity of gas stations.

phone, use it in a vertical position. Your

personal safety can only be improved by

doing so.

Regulations limit the use of radio equipment

in chemical factories, gas depots and any

area where there are mines. You are advised

to abide by these rules.

Electronic medical equipment

•

Your phone emits radio waves that could

possible interfere with electronic medical

equipment, for example an auditory

Road safety

prosthesis, heart pacemakers, ꢀ Your

doctor or the manufacturer of the medical

item will be able to advise you on whether

your phone could cause such interference.

Except in an emergency, do not use your

phone when driving without a hands-free kit

that enables you to maintain your freedom of

movement. Always keep your eyes on the

road when you are driving. To make a call,

pull to the side of the road, then make your

call. Abide by the current laws.

•

In hospitals, the phone must be switched

off.

16. Recommendations

MY_304X_EN-16.p65

28/12/01, 11:39

•

You are strongly advised not to

connect your phone to the

charger if it doesn’t contain a

battery.

Warning

General precautions

The constructor

cannot be held

responsible if the

above

recommendations

are not followed or if

the phone is

• Do not attempt to open your phone and

repair it yourself. The manufacturer cannot

be held responsible for any damage/

accident that may result from this.

To avoid the risk of

demagnetisation, do not let

electronic devices close to your

phone for a long time.

• Any work carried out by non-authorised

personnel will invalidate your warranty.

incorrectly used.

• Do not use your phone in damp areas

(bathroom, swimming pool, ꢀ). Protect it

from water and other liquids.

• Do not expose your phone to extreme

temperatures.

• Do not leave your phone within the reach

of small children (certain removable parts

may be accidentally ingested).

Note on downloading facilities

You can use your mobile phone to download ringing tones, icons and

animated screen savers. Some of these items may contain data that

causes your mobile phone to malfunction or to lose data (viruses for

example).

• Use your phone with original accessories,

or your warranty will be rendered invalid.

• The physicochemical processes created

by chargers impose temperature limits

when charging the battery. Your phone

automatically protects the batteries in

extreme temperatures.

Sagem declines all responsibility for (1) the reception of data that has been

downloaded or loss of said data, (2) the consequences on the operation of

the mobile phone and (3) damage resulting from the reception of said

downloaded data or loss of said data. Moreover, Sagem draws attention to

the fact that problems caused by the reception of downloaded data that

does not comply with Sagem’s specifications are not covered by the

guarantee. Consequently, the cost of diagnosing and repairing mobile

phones affected by said downloaded data will be charged to customers.

• Removing the battery may mean that the

time is lost.

The software program developed by SAGEM remains the exclusive

property of SAGEM SA. It is therefore highly prohibited to modify, translate,

de-compile or disassemble this software program or any part thereof.

16. Recommendations

MY_304X_EN-16.p65

28/12/01, 11:39

not cycling: disconnect the charger, re-

connect and then check the battery

charging indicator: if it is still not cycling,

disconnect the charger and re-connect

several times.

Answers to your questions

The telephone does not turn on

Remove the battery and then replace it.

If the battery is still not charging, contact

the after sales service.

Connect the phone to the charger (check

that this is plugged in) for approximately

5 minutes.

When the battery charging indicator is

continuously on, the battery is fully

charged.

No network recognised

Error message: BATTERY STATUS NOT

KNOWN

Remove the SIM card. Check that there is

no dust or grit in the SIM slot. Replace the

SIM card being sure to push it right up to

the stop point.

The battery pack is not recognised by the

phone. Check that the battery pack is

correctly fitted in the phone.

Calls to a messaging service or voice

server do not get through

Error message: LOW BATTERY

Check in the Ringing and beeps/Tones

menu that the box is ticked.

This message is displayed when the

battery charge is too low. The phone turns

off automatically. Charge the phone.

Unable to turn the phone on

Error message: SIM NOT PRESENT

Charge the phone for 15 minutes before

turning it on.

Check that the SIM card has been

inserted correctly.

Check the battery charging indicator:

cycling: charging normally

Answers to your questions

MY_304X_EN-QR.p65

28/12/01, 11:39

Examine the SIM card. If it is damaged,

contact your mobile phone operator sales

point. If the message is still displayed,

contact the after sales service.

Error message: SIM LOCKED

The Operator may require certain types of

SIM card to be used. This message

indicates that the SIM card is not accepted.

Error message: INCORRECT PIN

Remove the SIM card and turn the phone

on again. If you get the SIM not present

error message, check with your phone

dealer whether your SIM card is compatible.

Otherwise, contact the after sales service.

The PIN has been incorrectly entered. If

the PIN is entered incorrectly three times,

the SIM card is blocked.

Error message: SIM BLOCKED

The phone display does not change

The PIN has been incorrectly entered

three times. Use your Personal

Unblocking Key (PUK) to unblock the SIM

card.

Press a key. If nothing is displayed, check

the position of the SIM card. If the problem

continues, contact the after sales service.

Enter:

No connection made

**05*PUK*PIN*PIN#

Check the form of the number called.

PUK: your PUK code supplied by your

Operator.

Check that there is at least one field

strength dot showing. If R is displayed but

there is no mobile phone operator name,

only emergency calls are allowed.

PIN: your PIN code.

After 10 (or 5 depending on the type of

SIM card) unsuccessful attempts, the SIM

card is blocked permanently. You must

then contact your Operator to get a new

card.

Check that you have not used all your credit

with the mobile phone operator.

Check that the SIM card provides the

service you required and that it has not

expired.

Answers to your questions

MY_304X_EN-QR.p65

28/12/01, 11:39

Check and, if necessary, disable the

outgoing call lock.

No voice box

Check that the SIM card provides this

service.

The network is saturated. Please try later.

If you still have problems getting a

connection, contact the Hotline.

Set up the redirection to the voice box

using the information provided by the

Operator.

Unable to receive calls

Try to make a call to check that the phone

and the network are operational.

Check and, if necessary, disable the

permanent call redirection (permanent call

redirection icon displayed).

Check and, if necessary, disable the

incoming call lock.

If you still have problems receiving calls,

contact the Hotline.

Cannot send messages

Check that the SIM card provides this

service.

Check that the message server is

correctly set up.

Try to make a call to check that the phone

and the network are operational.

Try sending the message later.

Answers to your questions

MY_304X_EN-QR.p65

28/12/01, 11:40

West Bend QUIKSERVE User Manual
Toastmaster ME12DPB User Manual
Tannoy T303 User Manual
Sony SMP N100 User Manual
Seagate ST3320820ACE User Manual
Seagate CFS270A User Manual
Seagate BARRACUDA XT SERIES SATA ST32000641AS User Manual
Samsung Gleam User Manual
Oregon Scientific RMR802 User Manual
Nokia Cell Phone E90 User Manual