Samsung Gleam User Manual

Verizon Wireless GleamTM  
b y  
P O R T A B L E  
A l l D i g i t a l  
M O B I L E P H O N E  
S a m s u n g  
User Manual  
Please read this manual before operating your  
phone, and keep it for future reference.  
Licensed by Qualcomm Incorporated under one or more of the following patents:  
U.S.  
Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107,  
225; 5, 109, 390.  
Printed in Korea  
ACCESS and NetFront are trademarks or registered trademarks of ACCESS CO., LTD.  
in Japan and other countries. Copyright © 1996 - 2007 ACCESS CO., LTD.  
RSA® is a registered Trademark RSA Security, Inc.  
Disclaimer of Warranties; Exclusion of Liability  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE  
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE  
PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF  
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT  
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE  
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE  
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE  
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR  
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION  
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY  
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,  
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING  
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF  
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.  
u700_AG07_PM_081707_F11  
Table of Contents  
1
Table of Contents  
2
3
Turning Your Phone On and Off  
Section 1: Getting Started  
Topics Covered  
Turning Your Phone On and Off  
Setting Up Voicemail  
Understanding this User Manual  
Notes and Tips  
This section allows you to start using your phone after activating your service,  
setting up your voicemail, contacting customer support, or getting an understanding  
of how this manual is put together.  
Turning Your Phone On and Off  
Turning Your Phone On  
END  
1. Open the flip, then press  
.
Note: As with any other radio-transmitting device, do not touch the internal antenna as it affects call quality  
and may cause the phone to operate at a higher power level than is necessary. The internal antenna  
is located along the top on the back side of your phone.  
2. Once the phone finds a signal, the time, date, and day appear in the  
display.  
3. You’re now ready to place and receive calls.  
Note: If the phone is outside the Verizon Wireless coverage area the roaming icon  
appears in the top  
of the display.  
Turn Your Phone Off  
END  
Press  
for two or more seconds. Your phone powers off.  
Getting Started  
4
           
Setting Up Voicemail  
Voicemail allows callers to leave voice messages, which can be retrieved any time.  
Note: Once your voicemail account has been set up, you can use the voicemail selection 7 (under the  
Messaging menu) to view details of voice messages in your voicemail box.  
Voicemail Setup*  
SEND  
@
1. Press and hold  
or  
from your phone  
or dial your wireless phone number from any touch-tone phone.  
#
2. When the recorded announcement begins, press  
to interrupt  
(if applicable).  
3. An easy-to-follow setup tutorial will begin. Follow the instructions to set up  
your new password and record a greeting.  
Listen to Voicemail  
SEND  
@
1. Press and hold  
or  
.
#
2. You are then prompted to enter your password followed by  
key.  
3. Follow the recorded prompts to listen to messages, change administrative  
options, and so on.  
*Airtime and long distance charges apply. IN Calling minutes do not apply to Voicemail setup or retrievals.  
Understanding this User Manual  
The chapters of this manual generally follow the same order as the menus and  
sub-menus in your phone. A robust index for quick reference to most features begins  
Also included is important safety information that you should know before using your  
phone. Most of this information is near the back of the guide, beginning on  
5
         
Notes and Tips  
Notes and Tips  
Throughout this guide are icons and text that are set apart from the rest. These are  
intended to point out important information, quick methods for activating features, to  
define terms, and more. The definitions for these methods are as follows:  
Notes: Explain alternative options within the current feature, menu, or sub-menu.  
Tips: Provide quick or innovative methods for performing functions related to the  
subject at hand.  
Important: Points out important information about the current feature that could  
affect performance, or even damage your phone.  
Getting Started  
6
       
Section 2: Understanding Your Phone  
Topics Covered  
Inserting and Removing the microSD card  
This section outlines key features of your phone. It also displays the screen and the  
icons that are displayed when the phone is in use.  
7
   
Features of Your Phone  
Features of Your Phone  
High Speed Data (EVDO 1x Technology)  
Global Positioning (GPS) Technology for VZ NavigatorSM  
V CAST Music and Video Capable  
Personal Organizer (Calculator, Calendar, Alarm Clock, Stop Watch, World Clock,  
and Notepad)  
Messaging Services (Standard and Enhanced TXT Messaging, Picture Messaging,  
Video Messaging, Sketch Messaging, Postcard, Email Messaging, Mobile Instant  
Messenger and Chat)  
2 Megapixel Camera and Camcorder  
Advanced Speech Recognition  
Dual Stereo Speakerphone or Speakers  
microSD™ Memory Card Slot  
Bluetooth® Wireless Technology **  
**The GleamTM supports the following Bluetooth profiles: Headset, Handsfree, Serial Port, Dial Up  
Networking, Object Push for vCard, Phonebook Access, Bluetooth Stereo Support for Music, Basic Image for  
sending/printing non-protected images to a compatible device, and Basic Print Profile. The GleamTM does  
not support all Bluetooth OBEX profiles. Go to www.verizonwireless.com/bluetoothchart to check vehicle/  
accessory compatibility.  
Understanding Your Phone  
8
   
Open View of Your Phone  
The following illustration shows the main internal features of your phone:  
16. Earpiece  
1. Internal LCD  
2. Navigation key  
15. OK key  
14. Right Soft key  
13. Voice Commands key  
12. End/Power key  
3. Left Soft key  
4. Speakerphone key  
5. Send key  
11. Clear key  
6. Voicemail key  
10. Toggle key  
7. Special Function  
key (Left)  
9. Special Function  
key (Right)  
8. Microphone  
9
 
Open View of Your Phone  
Features  
1. Internal LCD: Displays all the information needed to operate your phone.  
2. Navigation key: These keys allow you to scroll through the phone menu  
options.  
3. Left Soft key: This key is used to navigate through menus and applications  
by selecting the choice indicated on the lower left area of the display  
screen.  
4. Speakerphone key: Press and hold this key to enable/disable the  
speakerphone option.  
5. Send key: Allows you to place or receive a call. From the main screen,  
press the key once to access the recent call log.  
6. Voicemail key: Press and hold to call Voicemail.  
7. Special Function key (Left): Enters special characters. Perform various  
functions.  
8. Microphone: The Microphone allows the other caller to hear you clearly  
when you are speaking to them.  
9. Special Function key (Right): Enters special characters. Perform various  
functions.  
10. Toggle key: When creating a message, press to cycle through words in  
Word mode.  
11. Clear key: Deletes characters from the display when you are in text entry  
mode. Press to return to the previous menu or screen when navigating  
features.  
12. End/Power key: Ends a call. Also press and hold the END key, to power On  
or Off. When you receive an incoming call, press END to send the call  
directly to voicemail.  
13. Voice Commands key: Press to activate Voice Commands.  
14. Right Soft key: This key is used to navigate through menus and  
applications by selecting the choice indicated on the lower right area of the  
display screen.  
15. OK key: Pressing when navigating through a menu accepts the highlighted  
choice in a menu.  
16. Earpiece: The earpiece allows you to hear the other caller.  
Understanding Your Phone 10  
Closed View of Your Phone  
The following illustration shows the main external features of your phone:  
11. Camera Lens  
10. Headset Jack  
1. Camera/Camcorder  
key  
2. Volume key  
9. Power/Accessory  
Connector  
3. External LCD  
8. Hold key  
7. Play/Pause key  
4. Rewind key  
6. Fast Forward key  
5. Speakers  
5. Speakers  
Features  
1. Camera/Camcorder key: Press to activate the camera or press and hold  
to activate the camcorder.  
2. Volume key: Allows you to adjust the master volume or adjust the voice  
volume during a call. To mute the ringer during an incoming call, press the  
volume key up or down. Also press and hold the key, to activate Sound Off  
mode/Normal mode.  
3. External LCD: External LCD shows signal and battery strength, time, day,  
and date. It also displays incoming calls or messages.  
4. Rewind key: Music rewind key. Touch and hold to rewind music. Tap to go  
to a previous song.  
5. Speakers: Music, Ringtones, and Sounds are played through the speaker.  
These speakers provide stereo sound for multimedia files.  
6. Fast Forward key: Music fast forward key. Press and hold to fast forward  
music. Tap to go to the next song.  
7. Play/Pause key: Music play or pause key.  
11  
 
Command Keys  
8. Hold key: Allows you to lock/unlock the music keys (i.e. Rewind, Play/  
Pause, and Fast Forward) on the front of the phone.  
9. Power/Accessory Connector: The power/accessory interface connector  
is used to plug in the charging accessories and also connect any available  
accessory cables to your phone.  
10. Headset Jack: Allows you to plug in an optional headset for safe,  
convenient conversations.  
11. Camera Lens: Allows you to take photos or record video.  
Command Keys  
Functions for the soft keys are defined by what appears above each in the display.  
There are two soft keys, the left soft key  
and the right soft key  
.
Left Soft Key  
Some functions of the left soft key are as follows.  
Press the Message (left) soft key  
to open the Message menu.  
When the left soft key function is Settings, press the Settings (left) soft key  
to view settings for the feature.  
When the left soft key function is Edit, press the Edit (left) soft key  
a Contact or Profile setting.  
to edit  
Right Soft Key  
Some functions of the right soft key are as follows.  
Press the Contacts (right) soft key  
to open your Contacts list.  
When the right soft key function is Options, press the Options (right) soft key  
to view more options for the current menu.  
Clear Key  
CLR  
The CLR key (  
) is used to erase or clear numbers, text, or symbols from the  
CLR  
display. You can also use  
to return to a previous menu or to return to the  
main screen from any menu.  
CLR  
If you enter an incorrect character, briefly press  
to backspace (and delete)  
the character.  
CLR  
To erase the previous word in a sentence, press and hold  
.
CLR  
To back up one menu level, briefly press  
.
CLR  
Press and hold  
to return to the main screen.  
Understanding Your Phone 12  
         
End Key  
The End key (  
END  
) is used to end a call, to turn your phone on/off, to return to the  
main screen from any menu or cancel the last input.  
Press and hold the End key (  
END  
) to turn your phone on or off.  
END  
Press  
Press  
input.  
to disconnect a call.  
END  
to return to the main screen from any menu, or to cancel the last  
Send Key  
SEND  
The Send key (  
) is used to answer calls, dial calls, and to recall the last  
number(s) dialed, received, or missed.  
SEND  
Press  
to answer calls.  
SEND  
Enter a number and press  
to make a call.  
SEND  
Press  
phone.  
Press  
from the main screen to display a list of all calls to and from your  
SEND  
twice from the main screen to call the most recently dialed, received,  
or missed number.  
SEND  
SEND  
Press  
to pick up a waiting call. Press  
again to switch back to the  
other call.  
OK  
Navigation Key  
Use the directional keys on the navigation key to browse menus, sub-menus, and  
lists. Each key also acts as a shortcut to launch applications. The navigation key can  
be customized to launch your favorite application. For more information, refer to "Set  
Speakerphone Key  
With the flip open, press and hold the Speakerphone key (  
) to switch from  
using the earpiece to the speakerphone before or during a call. Use the volume keys  
(located on the left side of your phone) to adjust the volume. Press and hold the  
speakerphone key to enable and disable the speakerphone option.  
When answering a call, press and hold the Speakerphone key (  
). To end the  
call again press and hold the Speakerphone key (  
). After the call has ended  
the speakerphone function turns off automatically.  
13  
       
Understanding the Display Screen  
Camera Key  
Press the Camera key (  
) (on the left side of the phone) to activate the camera.  
While in camera mode press the camera key or to take a photo.  
Touch Keypad Lock  
Press Lock/Unlock key (  
the touch keypad(i.e.  
the front of the Gleam.  
) on the right side of your phone to lock/unlock  
Play/Pause, and Fast Forward) on  
Rewind,  
Note: The music touch keys are only functional when the backlight is on.  
Understanding the Display Screen  
The top line of your phone’s display contain icons that  
indicate network status, battery power, signal strength,  
connection type and more.  
The gray line of the main screen shows icons that  
indicate feature and function status. The following list  
contains icons that may appear in your display.  
Understanding Your Phone 14  
   
Display icons  
Standalone Mode: Appears when Standalone Mode is on. When  
on, all RF functions for your phone are disabled, and you cannot  
use your phone to place or receive calls.  
Roaming: Your phone is outside your home area. While  
roaming, another wireless provider may be handling your call.  
The service rate for the call may be higher than those made  
from within your home area. Please refer to Verizon Wireless for  
roaming rates.  
EV signal strength: Appears when your phone is using the EVDO  
protocol. Appears when your phone is on and indicates the  
current signal strength. More bars indicate a stronger signal.  
1X signal strength: Indicates your phone is using the CDMA 1X  
protocol. Appears when your phone is on and indicates the  
current signal strength. More bars indicate a stronger signal.  
EV1X signal strength: The EVDO/1X protocol is capable of high-  
speed broadband data (3G). Appears when your phone is on  
and indicates the current signal strength. More bars indicate a  
stronger signal.  
D signal strength: Appears when your phone is receiving digital  
data. Appears when your phone is on and indicates the current  
signal strength. More bars indicate a stronger signal.  
SSL: Indicates the secure socket layer is active transmits your  
communications over the internet in an encrypted format.  
Voice Privacy: Prevents eavesdropping over a CDMA traffic  
channel.  
Hold - Keys Locked: Indicates that the external music player  
keys are locked and are not functional. Press and hold the  
HOLD key to lock/unlock the external music player keys.  
15  
                         
Understanding the Display Screen  
No service: Your phone cannot find a signal because you’re  
outside a service area. You cannot make or receive calls. Wait  
for a signal or move to an open area to find a signal. This  
indicator always appears when you first turn on your phone and  
disappears once service is located.  
Voice Call: Indicates a call in progress.  
Data Call: Indicates a data call in progress.  
Dormant: Indicates no incoming or outgoing data.  
E911: Indicates Global Positioning Service (GPS) for 911 is set to  
On for emergency calls only.  
Location On: Global Positioning Service is set to On for location  
and 911 calls.  
Battery Level: More bars indicate a greater charge. When the  
battery is low, an empty battery icon flashes and the phone  
sounds an alert, which indicates your phone is about to shut  
down.  
TTY: Indicates that TTY is enabled.  
Bluetooth On: Indicates that Bluetooth wireless technology is  
turned on.  
Bluetooth Connected: Indicates Bluetooth wireless technology is  
turned on and is paired with another Bluetooth-enabled device.  
Bluetooth Active: Indicates that Bluetooth wireless technology is  
connected to another device and receiving or pushing data.  
Understanding Your Phone 16  
                     
Bottom Display Icons  
All Sounds Off: The ringer is silenced for all alerts, incoming  
calls, and incoming messages.  
Alarm Only: Your phone will only ring when the set alarm  
sounds.  
Vibrate On: Your phone vibrates upon receiving a call.  
Speakerphone: Your phone switches to speakerphone instead  
of earpiece.  
Missed Calls: Your phone displays this icon when calls are  
missed.  
New Msgs: You’ve received a new text, page or web alert  
message. You’re also notified of a new message by animations  
and sound.  
Calendar Appt: Your phone displays this icon when you have a  
calendar event scheduled.  
Voicemail: You’ve received a voicemail message, page or web  
alert message. You have one or more unread voicemail  
messages in your voicemail box. (Only applicable on the Verizon  
Wireless Network.)  
Alarm On: Indicates that your phone has a set alarm.  
Auto Answer: Automatic answer is enabled. Your phone  
automatically picks up calls after the designated time with the  
stereo headset or when your Bluetooth headset or Bluetooth  
hands-free car kit is connected.  
17  
                     
Inserting and Removing the microSD card  
Dialogue boxes  
Dialogue boxes prompt for action, inform you of status, or warn of situations such as  
low memory. Dialogue boxes and their definitions are outlined below.  
Choice  
Example: “SAVE MESSAGE?”  
Reconfirm  
Example: “ERASE ALL MESSAGES?”  
Performing  
Example: “SENDING...” “CONNECTING...”  
Completed  
Example: “MESSAGE SENT”  
Information  
Example: “NEW MESSAGE”  
Error  
Example: “SYSTEM ERROR!”  
Warning  
Example: “BATTERY LOW,” “MEMORY FULL!”  
Inserting and Removing the microSD card  
To add additional memory to your phone insert a microSD card into the external  
memory slot, located in the battery compartment of the phone. Use the following  
instructions and illustrations for proper insertion and removal.  
1. Press down, and slide the battery cover back and lift up to remove it.  
Understanding Your Phone 18  
 
2. Use your finger to lift the battery (bottom end first) up and away from the  
phone.  
3. Remove the battery  
4. Push the microSD card into the slot until it clicks into place.  
19  
Battery  
To remove the card:  
5. To remove the card, using your thumb carefully press down and slide the  
card in the direction indicated below.  
Battery  
Note: This phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel  
charger.  
You must fully charge the battery before using your phone for the first time. A fully discharged battery  
requires up to 4 hours of charge time.  
Important!: Although the phone can be used while the battery is charging, the battery must be fully  
charged before first use, otherwise you could damage the battery.  
Understanding Your Phone 20  
   
Using A Non-Supported Battery  
Samsung handsets do not support the use of a  
non-supported battery.  
When using a non-supported battery you will hear a  
series of beeps and you will see a warning message that  
indicates “NON SUPPORTED BATTERY. SEE USER  
GUIDE” If you receive this warning, battery charging has  
been disabled.  
Samsung charging accessories (i.e. travel adapter, and  
cigarette lighter adapter) will only charge a Samsung  
approved battery.  
OK  
To continue use of your handset press  
.
Note: When using a non-supported battery the handset can only be used for the duration of the life of the  
battery and cannot be recharged.  
Important!: Using a non-supported battery may cause damage to your phone. Use a Samsung supported  
battery only.  
21  
 
Battery  
Install the Battery  
1. Press down, and slide the battery cover back and lift up to remove it.  
2. Insert the top end of the battery into the phone housing by using the  
direction of the arrow printed on the battery. The gold contacts on the top  
of the battery should match up with those on the phone.  
3. Push the bottom end of the battery down until it snaps into place.  
4. Slide the battery cover up until it snaps into place..  
Understanding Your Phone 22  
   
Remove the Battery  
1. Press down, and slide the battery cover back and lift up to remove it.  
2. Use your finger to lift the battery (bottom end first) up and away from the  
phone.  
3. Slide the battery cover up until it snaps into place.  
23  
   
Battery  
Charge the Battery  
Your phone is powered by a rechargeable standard Li-ion battery. Only use  
Samsung-approved charging devices and batteries. Samsung accessories are  
designed to maximize battery life. Using other accessories may invalidate your  
warranty and may cause damage.  
Travel Charger  
The travel charger is a convenient, light-weight charger that rapidly charges your  
phone from any 120/ 220 VAC outlet.  
1. Plug the connector of the travel adaptor into the jack on the right side of  
the phone.  
Incorrect  
+
Correct  
2. Plug the adaptor into a standard AC wall outlet.  
3. When the phone is completely charged (the battery icon becomes still),  
unplug the adapter from the power outlet.  
Note: You can use your phone while charging, however, the battery charges faster if the phone is turned  
off.  
Battery Indicator  
The battery indicator  
power level. Four bars indicate a full charge, while an empty icon  
almost empty battery. Two to three minutes before the battery becomes too low to  
operate, a blinking empty battery icon appears and a tone sounds. If you  
continue to operate the phone without charging, it shuts down.  
in the upper-right corner of the display indicates battery  
indicates an  
Understanding Your Phone 24  
     
Section 3: Call Functions  
Topics Covered  
Making a Call  
Answering a Call  
Call In-Progress Options  
Recent Calls  
Roaming  
TTY  
Voice Commands  
This section describes how to make or answer a call. It also includes the features  
and functionality associated with making or answering a call.  
Making a Call  
1. From the main screen, enter the number you want to call using the  
numeric keypad.  
SEND  
2. Press  
.
Making Calls Using Contacts  
Contacts are entries that you create to store names, numbers, and other information  
for people or groups of interest. If you’ve already entered information into your  
Contacts list, you can recall and dial the contact easily. For more information, refer to  
1. From the main screen, press the right soft key  
Contacts.  
2. Press the navigation up and down keys until the contact that you want to  
call is highlighted.  
Note: To quickly locate a name, press (or multi-press) any key on the keypad that corresponds to the first,  
second, and/or third letters of the contact’s name.  
OK  
3. When the desired contact is highlighted, press  
VIEW. Details for the  
contact appear in the display.  
4. If the entry contains more than one number, use the up or down navigation  
key to highlight the desired number.  
25  
     
Answering a Call  
SEND  
5. Press  
to call the number.  
Answering a Call  
When you receive an incoming call, press  
SEND  
to answer the call or the right soft  
key  
Ignore to send the call to voicemail, or left soft key  
Quiet to  
silence the ringer.  
Answering Call-Waiting Calls  
When you receive a call while on a call:  
SEND  
Press  
to answer the new call.  
SEND  
If you press  
hold.  
and answer the incoming call, the original caller is placed on  
SEND  
Press the  
key again to return to your original call.  
Call In-Progress Options  
Access numerous menus and features even while in a call.  
Note: If the call is disconnected while accessing the Call-In Progess Options, the options disappear from  
the display and the phone eventually returns to the main screen.  
1. While in a call, press the right soft key  
menu items appear in the display.  
Options. The following  
• Messaging: Displays the Messages menu.  
• Contacts List: Opens Contact list to view your contacts.  
• Recent Calls: Displays your recent incoming, missed and outgoing calls.  
• Bluetooth Menu: Displays the Bluetooth menu.  
• Main Menu: Displays the Main menu.  
• Notepad: Opens the Notepad.  
• Voice Record: Records the conversation as a voice memo in My Sounds.  
Note: Recording a call may require consent from the person being recorded. User should determine  
applicable law and take appropriate steps to comply.  
• Whisper Mode: Increases the microphone to the maximum volume level.  
Note: During a call turn on Whisper Mode when speaking softly or when the caller cannot hear your voice  
clearly. This mode is useful in meetings or public places.  
OK  
2. Use the navigation key to highlight a menu. Press  
to open the  
highlighted menu or to activate the feature.  
Call Functions 26  
     
3. Press the left soft key  
Mute/Unmute to mute the call. Press  
again to unmute the call.  
Recent Calls  
When you place, miss, or receive a call, a record of the call is saved in Recent Calls,  
which is a listing of the different types of calls you can either receive or make. These  
types of calls are listed below.  
Missed: Displays any missed calls.  
Received: Displays any received calls that were answered.  
Dialed: Displays all outgoing calls made from your phone.  
All: Displays all missed, received, and outgoing calls made from your phone.  
Viewing Call Information  
Recent Calls retains information such as the duration, date and time, and whether  
the call was received, dialed, or missed.  
SEND  
1. From the main screen, press the  
key.  
OK  
Or press  
MENU then press the right navigation key to highlight  
OK  
Recent Calls and press  
. Use the up or down navigation key to  
highlight the call log that contains the number you want to view and press  
OK  
.
2. Press the down navigation key to highlight the desired number.  
OK  
3. Once the desired number is highlighted, press  
OPEN.  
4. The following call information appear in the display:  
• Call Type: The title bar displays if the call is a missed, dialed, or received.  
• Name: If the caller is in your Contacts list, their name is listed here as well as the  
appropriate icon to indicate Mobile 1, Mobile 2, Home, Work, or Fax. This option  
only appears if the caller is in your Contacts list. If the caller is not in your  
Contacts list, No Name appears.  
• Number: Displays the telephone number.  
• Time: The time of the call.  
• Date: The date of the call.  
• Duration: The duration of the calls made or received.  
5. Press the right soft key  
Options to display the following options:  
• Save: Save the number to your Contacts list.  
Note: If save doesn't appear, that entry is already in your Contacts list.  
• Details: Displays details about the caller if entered in Contacts.  
27  
     
Recent Calls  
• Erase: Deletes the call from Call History.  
• Lock/Unlock: Locks or unlocks the entry to prevent accidental deletion.  
• View Timers: Select to view the call timers for your phone.  
OK  
6. Press the down navigation key to highlight an option. Press  
to enter  
the highlighted option’s sub-menu.  
Call History Icons  
When you view Recent Calls, an icon to the left of the number indicates the type of  
call.  
Indicates a Missed call  
Indicates a Dialed call  
Indicates a Received call  
Making Calls Using Call History  
SEND  
1. From the main screen, press  
then press up or down navigation key  
until the desired number is highlighted.  
SEND  
OK  
2. Press  
to call the highlighted number. Or, you can press  
SEND  
OPEN, then press  
to call the highlighted number.  
Creating or Updating Contacts Using Call History  
SEND  
1. From the main screen, press  
then press up or down navigation key  
until the desired number is highlighted.  
2. Press the right soft key Options. Save is highlighted. Press  
3. Use the up or down navigation keys to highlight Add New Contact or  
OK  
.
OK  
Update Existing. Press  
.
Call Functions 28  
       
4. If you selected Add New Contact, the following types are available.  
Mobile 1  
Mobile 2  
Home  
Work  
Fax  
5. If you selected Update Existing, proceed to step 10.  
6. Use the up/down navigation keys to highlight the desired entry type  
OK  
(Mobile 1, Mobile 2, Home, Work, or Fax) then press  
.
7. Enter a name for the entry using the keypad. Press the left soft key  
Abc if you wish to select a different method of text entry, such as  
Word, Abc, ABC, 123, or Symbols.  
8. To assign a Speed Dial location, use the up/down navigation key to  
highlight the number you would like to assign to a Speed Dial location and  
press the right soft key  
Options. Highlight Set Speed Dial and  
OK  
press  
.
OK  
Highlight an unassigned location and press  
SET. A confirmation  
OK  
message appears in the display, Yes is highlighted, press  
to add  
Contact to the speed dial location.  
Note: Voicemail is assigned to Speed Dial location 1.  
Note: You can assign a speed dial location to each number associated with the contact (Home, Work,  
Mobile 1, Mobile 2, and Fax.).  
OK  
9. When you’re finished entering information for the entry, press  
SAVE.  
The entry is saved to your Contacts.  
10. An UPDATE EXISTING pop-up screen with a selection list of entry types  
displays. Use the up or down navigation keys to highlight the desired type  
O
K
then press  
your Contacts.  
. The number is added to the selected entry and saved to  
29  
Roaming  
Delete Call History Entries  
SEND  
1. From the main screen, press  
then press up or down navigation key  
until the desired number is highlighted.  
2. Press the right soft key  
Options. A pop-up menu appears in the  
display.  
OK  
3. Press the down navigation key to highlight Erase and press  
. Select  
Yes or No at the ERASE ENTRY? pop-up screen.  
K
O
4. Press  
.
Delete All Call History Entries  
SEND  
1. From the main screen, press  
.
2. Press the right soft key  
Options. A pop-up menu appears in the  
display.  
OK  
3. Press the down navigation key to highlight Erase All and press  
.
Select Yes or No at the ERASE ALL ENTRIES? pop-up screen.  
OK  
4. Press  
Roaming  
What is Roaming?  
.
Your phone can roam on other digital networks. Roaming occurs when you travel  
outside a pre-designated coverage area. The roaming icon displays when roaming is  
active and extra charges may apply when making or receiving calls.  
Note: Some features may be unavailable while roaming.  
Roaming Options  
The following roaming options are available:  
Home Only - Your phone is available for normal operation only in the designated  
coverage area.  
Automatic: The preferred roaming list is used to acquire service.  
Note: Contact Verizon Wireless for information regarding preferred systems.  
Call Functions 30  
         
To change your Roaming option, follow these steps:  
OK  
1. From the main screen, press  
MENU. Use the right navigation key to  
OK  
highlight  
2. Press  
3. Press  
Settings & Tools and press  
.
Phone Settings.  
System Select.  
4. Use the up or down navigation keys to choose the setting you want, and  
OK  
press  
.
TTY  
Your phone is fully TTY compatible. Connect the TTY equipment to the headset jack,  
which is located on the right side of the phone. Before you can use your phone with  
a TTY device, you’ll need to enable TTY functions in the phone.  
OK  
1. From the main screen, press  
MENU. Use the right navigation key to  
O
K
highlight  
2. Press  
3. Press  
Settings & Tools and press  
.
Call Settings.  
TTY Mode. The TTY Mode screen displays.  
4. A warning appears in the display stating “ENABLING TTY WILL DISABLE  
HEADSET AUDIO. CONTINUE?”  
OK  
Use the up or down navigation key to highlight Yes and press  
to  
proceed to TTY MODE screen.  
OK  
Use the up or down navigation key to highlight No and press  
to return  
to Call Settings menu.  
5. Use the up or down navigation keys to select one of the following:  
• TTY Full  
• TTY + Talk (VCO)  
• TTY + Hear (HCO)  
• TTY Off  
OK  
6. Press  
to make your selection. The TTY MODE SET screen displays.  
31  
   
Voice Commands  
Voice Commands  
Voice Commands is advanced speech recognition software that can be used to  
activate a wide variety of functions on your phone. Voice Commands software  
automatically voice activates all contacts for voice dialing and searching, no pre-  
recording or training needed. Speak phone numbers naturally to dial, and use voice  
commands to navigate phone menus.  
Voice Commands Settings  
You can adjust the settings and preferences by opening Voice Commands menu.  
Using this menu, you can change the following Voice Command features:  
1. From the main screen, press the Voice Commands key (  
).The  
Voice Commands screen appears in the display.  
2. Press the right soft key  
Settings.The following options appear in  
the display:  
• Digit Dial Readout: Reads out the numbers pressed when dialing a phone  
number.  
• Menu Readout: Reads out the menu items and contacts as you scroll through  
them.  
• TXT Msg Readout: Reads out the text in a TXT message.  
Note: Picture or Video messages cannot be read back to you.  
• Choice List: If Voice Commands is not absolutely confident that it has correctly  
identified a name or number, it can display a choice list of up to three  
possibilities, and prompt you to confirm the correct one. You can control when  
choice lists appear by changing the Choice Lists setting to the following:  
-
Automatic: Voice Commands displays a choice list when it is not confident it  
has identified the correct choice from among multiple alternatives.  
Always Off: Voice Commands never displays a choice list. Instead, the  
application picks the best from among the possible choices.  
-
Call Functions 32  
     
• Sensitivity: Sensitivity controls the balance between rejecting too much, which  
means the phone frequently does not recognize names, numbers, or  
commands, and rejecting too little, which means it frequently recognizes  
something even if nothing was said. When Voice Commands rejects an  
utterance, it displays a message such as “Please repeat…” or “No match  
found.” If you frequently experience these messages, you might be able to get  
better recognition by selecting the Sensitivity setting Reject Less. If you frequently  
experience false activations (Voice Commands detects a wrong match), you  
might be able to get better performance by selecting the Sensitivity setting Reject  
More.  
• Train Voice: Use the Train Voice menu to adapt digit dialing and name dialing  
to your voice.  
• Prompts: Allows you to select the voice command system characteristics.  
-
Mode: Select the voice command system mode from the following:  
-Prompts - for handset to read out voice command prompts  
-Readout - for handset to read out prompts, dialing digits, menus, and TXT  
messages (regardless of individual settings for these above)  
-Tones Only - for handset to prompt you with a tone only  
-
-
Audio Playback: Allows audio playback to play through the speakerphone or  
through the earpiece.  
Timeout: Allows you to set the timeout interval. If not used within 5 sec or 10 sec  
Voice Command will timeout and return to the main screen.  
• Call Alert: Provides audible readout of the phone number and/or name (if in  
your contact list) of an incoming call.  
• Key Setting: Allows you to select the method the Voice Command menu can  
be accessed. Select Voice Key Only, Voice Key / Headset, Voice Key / Flip.  
Voice Commands  
The following is a list of functions that you can perform  
using Voice Commands speech recognition on your  
phone.  
Call <Name or #>: Dial by saying a Name in your  
Contacts List, a Name and a Location (home, work,  
mobile) or the phone number.  
Send <Msg Type>: Send a text, picture, or video  
message to a number or to someone in your Contacts  
List.  
Goto <Menu>: Open any application installed on your  
device.  
Check <Item>: Provides details of your phone status, voicemail, messages,  
missed calls, time, signal strength, battery level, and volume level.  
33  
 
Voice Commands  
Contacts <Name>: Open the contact record for any name in your Contacts List.  
Play <Playlist name>: Opens a music playlist.  
My Account: Provides information about your Verizon Wireless account.  
Help: Provides a helpful tutorial on how to use Voice Commands.  
Call <Name or #>  
Call Digit Dialing  
Digit Dial allows you to dial any phone number by simply speaking the digits into the  
phone. No training is necessary, and Digit Dial is programmed to understand natural  
speech.  
1. From the main screen, press the Voice Commands key (  
).  
2. After a brief pause, a list of optional commands appears in the display and  
the audio prompt "Please say a command" plays through the speaker or  
speakerphone-if it is enabled.  
3. Say “Call” at a distance of 3-12 inches from the phone in a natural voice.  
4. “Please say the name, numer, voice mail or last number” plays through the  
speaker.  
5. To use Digit Dialing, say the area code and number that you want to dial  
into the microphone, clearly and naturally.  
6. The number that you said is repeated through the speaker and your phone  
dials the number.  
7. If Voice Commands is not sure of the number that you said, a list of  
possible matches appears in the display.  
8. You’re asked to confirm the correct number as Voice Commands displays  
the results.  
Say “Yes” to confirm the number.  
Say “No” to reject the number.  
Say “Exit” to exit the Voice Command.  
Say “Repeat” to have the selected number read one more time.  
Call Name Dialing  
To use Name Dial, you’ll need to have entries stored in your Contacts list. See  
page 54 for information on creating a Contacts list.  
1. From the main screen, press the Voice Commands key (  
).  
Call Functions 34  
   
2. After a brief pause, a list of optional commands appears in the display and  
the audio prompt “Please say the name, number, voice mail or last  
number” plays through the speaker.  
3. Say “Call” at a distance of 3-12 inches from the phone in a natural voice.  
4. “Say the name or number” plays through the speaker or speakerphone-if it  
is enabled.  
5. To use Name Dialing, say the name of the contact that you want to dial.  
6. The name that you said is repeated through the speaker and your phone  
dials the number.  
7. If Voice Commands is not sure of the number that you said, a list of  
possible matches appears in the display.  
8. You’re asked to confirm the correct number as Voice Commands displays  
the results.  
Say “Yes” to confirm the number.  
Say “No” to reject the number.  
Say “Exit” to exit the Voice Command.  
Say “Repeat” to have the selected number read one more time.  
Note: In case various number are displayed , “Which Number?” will display in the Listening menu option.  
9. The location is repeated through the speaker and your phone dials the  
number.  
Send <Msg Type>  
Send Text  
1. From the main screen, press the Voice Commands key (  
).  
2. A list of commands appears in the display and the audio prompt "Please  
say a command" plays through the earpiece or speakerphone--if it is  
enabled.  
3. Say “Send Text” at a distance of 3-12 inches from the microphone.  
“Please say the name or number” plays through the earpiece or  
speakerphone.  
4. Say the name exactly as it is displayed in your Contacts list, first name  
followed by last name or the phone number of the recipient.  
Note: In case various number are displayed , “Which Number?” will display in the Listening menu option.  
35  
 
Voice Commands  
5. The contact name appears in the To: field. For more information, refer to  
Send Picture  
Send Picture allows you to access the Picture Messaging menu. You can use entries  
stored in My Pictures or you can take a picture of an image using the camera.  
1. From the main screen, press the Voice Commands key (  
).  
2. A list of commands appears in the display and the audio prompt "Please  
say a command" plays through the earpiece or speakerphone-if it is  
enabled.  
3. Say “Send Picture” at a distance of 3-12 inches from the microphone.  
“Please say the name or number” plays through the earpiece or  
speakerphone.  
4. Say the name exactly as it is displayed in your Contacts list, first name  
followed by last name.  
Note: In case various number are displayed , “Which Number?” will display in the Listening menu option.  
5. The contact name appears in the To: field. For more information, refer to  
Send Video  
Send Video allows you to access Video message, you can use entries stored in My  
Videos or you can record a video using the camcorder.  
1. From the main screen, press the Voice Commands key (  
).  
2. A list of commands appears in the display and the audio prompt “Please  
Say a Command” plays through the earpiece or speakerphone--if it is  
enabled.  
3. Say “Send Video” at a distance of 3-12 inches from the microphone.  
“Please say the name or number” plays through the earpiece or  
speakerphone.  
4. Say the name exactly as it is displayed in your Contacts list, first name  
followed by last name.  
Note: In case various number are displayed , “Which Number?” will display in the Listening menu option.  
5. The contact name appears in the To: field. For more information, refer to  
Call Functions 36  
 
Goto <Menu>  
The “Go To” command allows you to access a menu within the phone (for example,  
“Go to Contacts”). If no menu option is stated, a list of options will be provided.  
Opening Menus and Applications  
To begin navigation of menu items on your phone or to open select applications  
using Voice Commands, perform the following:  
1. From the main screen, press the Voice Commands key (  
).  
2. A list of commands appears in the display and the audio prompt “Please  
say a command” plays through the speakerphone.  
3. To begin navigation of menu items, say “Go To” at a distance of 3-12  
inches from the microphone. The menu list displays and a prompt of  
“Please choose” plays through the speakerphone.  
4. Select one of the following menus or applications:  
Contacts  
Recent Calls  
Messaging  
Get It Now  
Settings & Tools  
News & Info  
V CAST Videos  
My Music  
5. The option spoken opens.  
37  
Voice Commands  
Check <Item>  
Checking Phone Status  
1. From the main screen, press the Voice Commands key (  
).  
2. A list of commands appears in the display and the audio prompt "Please  
say a command" plays through the earpiece or speakerphone--if it is  
enabled.  
3. Say “Check” at a distance of 3-12 inches from the microphone. “Please  
choose” plays through the earpiece or speakerphone. Valid “Check”  
commands are:  
"Status": Displays and announces all of the available status indicators in  
sequence through the earpiece or speakerphone—if it is enabled.  
"Voicemail" : Displays the number of new voicemail messages.  
"Messages": Displays and announces the number of new voicemail, TXT, and  
Picture messages through the earpiece or speakerphone—if it is enabled.  
"Missed Calls": Displays the missed call log.  
"Time": Displays and announces the current time through the earpiece or  
speakerphone—if it is enabled.  
"Signal Strength": Displays and announces the current EVDO and 1x signal  
strength levels through the earpiece or speakerphone—if it is enabled.  
"Battery": Displays and announces the current battery level through the  
earpiece or speakerphone—if it is enabled.  
"Volume": Displays and announces the current master volume setting through  
the earpiece or speakerphone—if it is enabled.  
4. The option spoken opens.  
Call Functions 38  
 
Contacts <Name>  
Name Lookup  
To perform a name lookup, you’ll need to have some entries in your Contacts list.  
1. From the main screen, press the Voice Commands key (  
).  
2. A list of commands appears in the display and the audio prompt "Please  
say a command" plays through the earpiece or speakerphone-if it is  
enabled.  
3. Say “Lookup” at a distance of 3-12 inches from the microphone. “Please  
say the name or number” plays through the earpiece or speakerphone.  
Note: The “Look Up” menu does not display in the Voice Command menu but the command is functional.  
4. Say the name exactly as it is displayed in your Contacts list, first name  
followed by last name.  
5. The contact name appears in the display with other information that you’ve  
entered for that contact.  
Play <Playlist name>  
Play  
Play allows you to choose from the following selections.  
All Songs: Allows you to play all songs on your handset. If all your music is stored  
on a microSD card it must be inserted to use this function.  
Playlist: Allows you to play a playlist.  
My Music: Allows you to access the Music Library menu.  
1. From the main screen, press the Voice Commands key (  
).  
2. A list of commands appears in the display and the audio prompt "Please  
say a command" plays through the earpiece or speakerphone-if it is  
enabled.  
Say “Play” or “My Music” at a distance of 3-12 inches from the microphone.  
The Music Library displays.  
Say “Play All Song” at a distance of 3-12 inches from the microphone to play all  
songs on your device.  
Say the “Playlist <Name>” at a distance of 3-12 inches from the microphone.  
Note: The playlist name must be spoken exactly as saved in My Music library.  
3. “Please Choose” plays through the earpiece or speakerphone.  
39  
 
Voice Commands  
4. Say “All Songs” to play all songs on your handset, say a playlist name to  
play that playlist, or say “My Music” to access the Music Library.  
My Account  
Using Voice Commands, you can check your Verizon Wireless account status by  
voice command.  
Note: This features launches the browser to your account page and requires a data plan and is subject to  
Verizon Wireless data coverage.  
Help  
Provides helpful information on how to use Voice Commands.  
1. From the main screen, press the Voice Commands key (  
).  
2. A list of commands appears in the display and the audio prompt “Please  
say a command” plays through them earpiece or speakerphone—if it is  
enabled.  
3. Say, "Help" at a distance of 3-12 inches from the phone in a natural voice.  
4. The tutorial appears in the displays.  
Call Functions 40  
Section 4: Menu Navigation  
Topics Covered  
Menu Navigation  
Shortcuts  
Menu Outline  
This section explains the menu navigation for your phone. It also includes an outline  
of all the available menus associated with your phone.  
Menu Navigation  
Access menus using the navigation keys, soft keys  
shortcut.  
, or use a  
OK  
1. From the main screen, press  
MENU. The first of several menus  
appear in the display.  
2. Use the navigation keys to browse phone menus.  
OK  
3. Press  
display.  
to enter the menu or sub-menu presently appearing in the  
Return to the Previous Menu  
CLR  
Press  
to return to the previous menu.  
Shortcuts  
Navigate Using Shortcuts  
You can also access menus and sub-menus using menu numbers. This method is  
OK  
often called a “shortcut.” To shortcut to a menu or sub-menu, press  
MENU,  
then enter the menu and/or sub-menu number(s) for the feature in question. For  
OK  
1. From the main screen, press  
MENU. The  
Contacts icon is  
OK  
highlighted, press  
to display the menu.  
2. Press the number of the menu. Example, press  
Groups,  
Family.  
41  
               
Menu Outline  
Navigation Key Shortcuts  
From the main screen, press a navigation key (as illustrated below) to launch its  
corresponding application.  
MOBILE WEB  
PICTURE & VIDEO  
GET IT NOW  
O
K
CALENDAR  
The Navigation key default settings can be customized to select other functions. For more information on  
how to customize your Navigation key see "Set Shortcut Key" on page 100.  
O
K
1. From the main screen, press  
highlight Settings & Tools and press  
2. Press Phone Settings, Set Shortcut Keys. The shortcut  
MENU, press the navigation key right to  
OK  
.
key list displays. Select one of the following options:  
@
Left Key  
Up Key  
Right Key  
Down Key  
Reset All  
3. Select the navigation key location you would like to change, select a menu  
OK  
item and press  
to save.  
Menu Outline  
The following list shows the menu structure and indicates the number assigned to  
each option.  
Get It Now  
1: Music & Tones  
1: V CAST Music  
Menu Navigation 42  
       
2: Get New Ringtones  
1: Get New Applications  
3: My Ringtones  
1: Get New Ringtones  
1: Get New Applications  
4: My Music  
5: My Sounds  
1: Record New  
6: Sync Music  
2: Picture & Video  
1: V CAST Videos  
2: Get New Pictures  
1: Get New Applications  
3: My Pictures  
4: My Videos  
5: Take Picture  
6: Record Video  
7: PIX Place  
3: Games  
1: Get New Applications  
4: News & Info  
5: Tools on the Go  
1: Get New Applications  
6: Extras  
1: Get New Applications  
Messaging  
1: New Message  
1: TXT Message  
2: Picture Message  
3: Video Message  
4: Sketch Message  
5: Postcard  
2: Inbox  
3: Sent  
4: Drafts  
5: Voicemail  
6: Mobile IM  
7: Email  
43  
Menu Outline  
8: Chat  
Contacts  
1: New Contact  
2: Contact List  
3: Groups  
1: No Group  
2: Business  
3: Colleague  
4: Family  
5: Friends  
4: Speed Dials  
5: In Case of Emergency  
6: My Name Card  
Recent Calls  
1: Missed  
2: Received  
3: Dialed  
4: All  
5: View Timers  
Settings & Tools  
1: My Account  
2: Tools  
1: Voice Commands  
2: Calculator  
1: Normal  
2: Tip  
3: Converter  
3: Calendar  
4: Alarm Clock  
5: Stop Watch  
6: World Clock  
7: Notepad  
3: Bluetooth Menu  
1: Add New Device  
4: Sounds Settings  
1: Call Sounds  
1: Call Ringtone  
Menu Navigation 44  
1: Get New Ringtones  
2: Call Vibrate  
2: Alert Sounds  
1: TXT Message  
1: Tone  
1: Get New Ringtones  
2: Vibrate  
3: Reminder  
2: Picture-Video Message  
1: Tone  
1: Get New Ringtones  
2: Vibrate  
3: Reminder  
3: Voicemail  
1: Tone  
1: Get New Ringtones  
2: Vibrate  
3: Reminder  
4: Device Connect  
3: Keypad Sounds  
4: Keypad Volume  
5: Service Alerts  
1: ERI  
2: Minute Beep  
3: Call Connect  
4: Service Change  
6: Power On/Off  
1: Power On  
2: Power Off  
5: Display Settings  
1: Banner  
1: Personal Banner  
2: ERI Banner  
2: Backlight  
1: Display  
1: Duration  
2: Brightness  
2: Keypad  
45  
Menu Outline  
3: Wallpaper  
1: Main Screen  
1: My Pictures  
2: My Videos  
3: Living Wallpaper  
2: Front Screen  
4: Display Themes  
5: Dial Fonts  
1: Style  
2: Size  
6: Menu Font Size  
7: Clock Format  
1: Main Clock  
2: Front Clock  
6: Phone Settings  
1: Standalone Mode  
2: Set Shortcut Keys  
3: Voice Commands  
4: Language  
5: Location  
6: Security  
7: System Select  
8: NAM Select  
9: Quick Search  
7: Call Settings  
1: Answer Options  
2: Auto Retry  
3: TTY Mode  
4: One Touch Dial  
5: Voice Privacy  
6: Data Settings  
7: DTMF Tones  
8: Memory  
1: Save Options  
1: Pictures  
2: Videos  
3: Sounds  
2: Phone Memory  
Menu Navigation 46  
1: Phone Memory Usage  
2: My Pictures  
3: My Videos  
4: My Ringtones  
5: My Music  
6: My Sounds  
3: Card Memory  
1: Car Memory Usage  
2: My Pictures  
3: My Videos  
4: My Music  
5: My Sounds  
9: Phone Info  
1: My Number  
2: SW Version  
3: Icon Glossary  
47  
Changing the Text Entry Mode  
Section 5: Entering Text  
Topics Covered  
Changing the Text Entry Mode  
Entering Text Using Word Mode  
Entering Upper and Lower Case  
Entering Symbols  
Entering Numbers  
This section outlines how to select the desired text input mode when entering  
characters into your phone. This section also describes how to use Word text entry  
system to reduce the amount of key strokes associated with entering text.  
Changing the Text Entry Mode  
1. While composing a message, press left soft key  
Abc to display a  
pop-up menu with the following Text Entry Mode options:  
• Word  
• Abc  
• ABC  
• 123  
• Symbols  
• Shortcuts*  
• Quick Text**  
Note: *The Shortcuts option is only available when the To field is highlighted. Use the Shortcuts option to  
quickly enter @, .com, .net, or .edu to an Email address.  
**The Quick Text option is only available when entering the body of the message. Use the Quick Text  
option to quickly enter a message.  
Entering Text 48  
       
Entering Text Using Word Mode  
Word recognizes the most commonly used word for any sequence of key presses  
and inserts that word into your message. It’s much faster than the traditional method  
of text entry (Abc) and requires only one key press per letter of the word that you’re  
spelling.  
1. From the main screen, press the left soft key  
press New Messge, TXT Message to compose a new text  
message.  
Message, then  
@
@
2. Enter the phone number or Email address of the recipient, then press the  
down navigation key to move to the Text field.  
3. Press the left soft key  
Abc to display a pop-up menu containing  
text entry mode options.  
4. Abc is highlighted by default. Use the up/down navigation keys to highlight  
OK  
Word, then press  
.
Now, for practice, enter the word “Hello” into your message by pressing  
each of the following keys only once:  
H
E
L
L
O
Word recognizes that the most frequently used word for the sequence of numbers  
entered. The word you just entered is “HELLO.” If more than one word shares the  
same sequence, Word provides the most common of the two. Press  
display other words in the dictionary, if available.  
to  
49  
   
Entering Upper and Lower Case  
Entering Upper and Lower Case  
Enter characters while in ABC mode by pressing the key that contains the desired  
characters for G”.  
Press the key repeatedly to cycle through other available characters for that key.  
Pause briefly when the desired character appears in the display to accept the  
character and therefore insert it into the message.  
Press  
To cycle between initial caps, uppercase, and lower case for characters in ABC  
mode, briefly press  
To cycle between initial caps, uppercase, and lower case for characters in Word  
#
to enter a space.  
.
mode, briefly press  
.
Entering Symbols  
Symbol mode enables you to enter symbols such as @ or % into a text message.  
1. From the main screen, press the left soft key Message, then  
press New Message, TXT Message to compose a new  
text message.  
@
@
2. Enter the phone number or Email address of the recipient, then press the  
down navigation key to move to the Text field.  
3. Press the left soft key  
Abc to display a pop-up menu containing  
the text entry mode options.  
4. Abc is highlighted by default. Use the up/down navigation keys to highlight  
OK  
Symbols, then press  
. The first of three screens containing symbols  
appears in the display.  
5. Press left soft key  
Prev or right soft key Next to page  
through the other symbols, if necessary.  
6. Enter the key that corresponds with the symbol that you wish to enter. For  
example, press  
symbols.  
for an exclamation point (!) on the first page of  
7. Repeat steps 3 through 6 to insert as many symbols into your message as  
desired.  
Entering Text 50  
       
Entering Numbers  
Enter numbers into a text message while in number mode (123). For instructions on  
1. From the main screen, press the left soft key  
press New Message, TXT Message to compose a new  
text message.  
Message, then  
@
@
2. Enter the phone number or Email address of the recipient, then press the  
down navigation key to move to the Text field.  
3. Press the left soft key  
Abc to display a pop-up menu containing  
the text entry mode options.  
4. Abc is highlighted by default. Use the up/down navigation keys to highlight  
OK  
123, then press  
5. Enter the key that corresponds with the number that you wish to enter. For  
example, press for the number 4.  
.
6. When you are finished adding numbers, press the left soft key  
123 to select a different method of text entry.  
51  
   
Opening Contacts Menu  
Section 6: Understanding Your Contacts  
Topics Covered  
Opening Contacts Menu  
Contacts Icons  
Adding a Contact  
Adding Pauses  
Contact Groups  
Finding a Contact Entry  
Editing an Existing Contact Entry  
Deleting a Contact Entry  
Storing Numbers After a Call  
Speed Dialing  
My Name Card  
Finding My Phone Number  
Emergency Contacts  
This section allows you to manage your daily contacts by storing their name and  
number in your Address Book.  
Opening Contacts Menu  
The Contacts menu provides access to powerful features such as adding Groups,  
creating and sending vCards, and viewing the phone number assigned to your phone  
by Verizon Wireless.  
OK  
1. From the main screen, press  
K
MENU,  
Contacts is highlighted  
O
and press  
.
• New Contact: Add a number, or Email address to your Contacts.  
• Contact List: Find a phone number by Name.  
• Groups: Add new or rename one of your five default groups.  
• Speed Dials: Set a speed dial for a contact.  
• In Case of Emergency: Add Emergency contacts.  
Understanding Your Contacts 52  
       
• My Name Card: Create a business card, which can then be sent to others as  
an attachment  
2. Use the navigation key to highlight the  
K
Contacts sub-menu of your  
O
choice, then press  
.
Contacts Icons  
You can assign multiple entries to a contact. The icons in the following table  
represent all available entry types  
Mobile 1 icon. Enter a mobile number for the entry in this field.  
Home icon. Enter a home number for the entry in this field.  
Work icon. Enter the work number for the entry in this field.  
Email 1 icon. Enter an Email address for the entry in this field.  
Group icon. Select an available group to associate with the entry  
in this field.  
Picture icon. Select an available pre-loaded image or  
downloaded image from Picture ID to associate with the  
contact.  
Ringtone icon. Select a ringtone to associate with the entry in  
this field.  
Mobile 2 icon. Enter a secondary mobile number for the entry in  
this field.  
Fax icon. Enter a fax number for the entry in this field.  
Email 2 icon. Enter a secondary Email address for the entry in  
this field.  
Note icon. Enter a note for the entry in this field.  
53  
 
Adding a Contact  
Adding a Contact  
When you add information to your Contacts, you can add it as a new entry or as an  
existing entry.  
Method 1  
Creating a new Contact from the main screen  
K
O
1. From the main screen, press  
MENU,  
Contacts is highlighted  
OK  
and press  
.
2. Press  
@
New Contact to enter the contact information.  
3. Enter a name for the entry using the keypad.  
4. Use the navigation key to highlight the appropriate type (Mobile, Home,  
Work, Email, etc.). Once highlighted, use the keypad to enter required  
information.  
Use the navigation key to highlight other type fields, if desired. Enter  
information using the keypad.  
5. To assign a Speed Dial location after entering the number, press the right  
O
K
soft key  
Options. Highlight Set Speed Dial and press  
K
.
O
Highlight an unassigned location and press  
SET. A confirmation  
OK  
message appears in the display, Yes is highlighted, press  
to add the  
Contact to the speed dial location.  
Note: Voicemail is assigned to Speed Dial location 1.  
Note: You can assign a speed dial location to each number associated with the contact (Home, Work,  
Mobile 1, Mobile 2, and Fax.).  
OK  
6. When you’re finished entering information for the entry, press  
SAVE  
to save the entry to your Contacts.  
Method 2  
Adding a number to a new or existing Contact from the main  
screen  
You can add new numbers to the Contacts by simply entering the number from the  
main screen, then following the necessary prompts to complete the process.  
1. From the main screen, enter the number that you wish to save using the  
keypad, then press the left soft key  
Save. You’re prompted to  
select from Add New Contact , Update Existing or Notepad.  
Understanding Your Contacts 54  
       
2. Press  
@
to enter the number as a Add New Contact, press  
to add the number to Update Existing or press  
to save the entry to  
Notepad.  
3. If you selected Add New Contact, the following types are available.  
Mobile 1  
Mobile 2  
Home  
Work  
Fax  
4. If you selected Update Existing, proceed to Step 9.  
5. Use the up/down navigation keys to highlight the desired entry type  
OK  
(mobile, home, work, etc.) then press  
.
6. Enter a name for the entry using the keypad. Press the left soft key  
Abc if you wish to select a different method of text entry, such as  
Word, Abc, ABC, 123, or Symbols.  
7. To assign a Speed Dial location, use the up/down navigation key to  
highlight the number you would like to assign to a Speed Dial location and  
press the right soft key  
Options. Highlight Set Speed Dial and  
OK  
press  
.
OK  
Highlight an unassigned location and press  
SET. A confirmation  
OK  
message appears in the display, Yes is highlighted, press  
to add  
Contact to the speed dial location.  
Note: Voicemail is assigned to Speed Dial location 1.  
Note: You can assign a speed dial location to each number associated with the contact (Home, Work,  
Mobile 1, Mobile 2, and Fax.).  
OK  
8. When you’re finished entering information for the entry, press  
SAVE.  
The entry is saved to your Contacts.  
9. If you selected Update Existing, the Contact List opens in Search mode.  
Use the navigation key to browse through entries, or enter the name of the  
entry using the keypad. Once you’ve highlighted the entry you wish to  
OK  
update, press  
.
55  
Adding Pauses  
10. An UPDATE EXISTING pop-up screen with a selection list of entry types  
displays. Use the up or down navigation keys to highlight the desired type  
OK  
then press  
your Contacts.  
Method 3  
. The number is added to the selected entry and saved to  
Storing Numbers After a Call  
Once you’ve finished a call, you can store the number of the caller to your Contact  
List.  
Note: If the call was incoming and Caller ID information was unavailable, then the store option is also  
unavailable.  
1. After you press  
END  
to end your call, the call time, length of call and  
phone number appears in the display.  
2. Press the right soft key  
Save. You’re prompted to select Add  
New Contact, or Update Existing.  
3. Follow the on-screen prompts to designate other information.  
Adding Pauses  
Calls to automated systems often require a password or account number. Instead of  
manually entering numbers each time, store the numbers to your Contacts along  
with special characters called pauses.  
1. From the main screen, enter the number.  
2. Press the right soft key  
Options use the navigation key to  
highlight Add Wait (A “W” appears in the display.) or Add Pause (A “P”  
OK  
appears in the display.) and press  
.
• Add Wait: A hard pause stops the calling sequence until further input from you.  
• Add Pause: A two-second pause stops the calling sequence for two seconds  
and then automatically sends the remaining digits.  
3. When you’re finished entering information for the entry, press the left soft  
key  
SAVE.  
4. Continue with Step 2, Method 2 of Adding a number to a new or existing  
Contact from the main screen.  
Note: Entering multiple Add Pauses extends the length of a pause. For example, two consecutive Add  
Pauses cause a total pause time of four seconds. Keep in mind pauses count as digits towards the  
48-digit maximum.  
Understanding Your Contacts 56  
         
Contact Groups  
You can place Contact entries into categories, called “Groups.” Groups allow you to  
search your Contacts faster, quickly send messages to one or more group members,  
and more.  
Note: By default, new entries to your Contacts are placed into the No Group unless another group is  
specified.  
View Groups  
OK  
1. From the main screen, press  
MENU,  
Contacts is highlighted  
OK  
and press  
.
2. Press  
Groups. The following groups appear in the display.  
• No Group  
• Business  
• Colleague  
• Family  
• Friends  
OK  
3. Use the navigation key to highlight the desired group, then press  
to  
access the group and view its contents.  
Move an Entry to Another Group  
1. From the main screen, press the right soft key  
Contacts. Use the  
navigation key to highlight the contact you wish to move.  
2. Press the left soft key  
Edit. Use the up/down navigation key to  
Set. Choose from the following groups:  
scroll to the Group option.  
3. Press the left soft key  
• No Group  
• Business  
• Colleague  
• Family  
• Friends  
4. Use the navigation key to highlight the group containing the entry that you  
OK  
wish to move, then press  
.
OK  
5. Press  
SAVE. The selection has been saved to the designated group.  
57  
     
Contact Groups  
Create a New Group  
In addition to the five groups already in your phone, you can create additional groups  
(a maximum of 25). New groups can be named anything you like as long as their  
names are within the 32-character limit.  
OK  
1. From the main screen, press  
MENU,  
Contacts is highlighted  
O
K
and press  
2. Press  
3. Press the left soft key  
.
Groups. Your existing groups appear in the display.  
New. A NEW GROUP pop-up menu  
displays with the “Enter Name” field highlighted.  
4. Enter the Group name.  
OK  
5. Press  
added.  
SAVE to save. The Groups list now displays the new group  
Send a Text Message to Members of a Group  
Use Send Message in the Group feature to send a message to as many as 10  
members of a group at once.  
Note: Text messaging availability varies when roaming off the Verizon Wireless Network.  
OK  
1. From the main screen, press  
MENU,  
Contacts is highlighted  
OK  
and press  
2. Press  
3. Highlight the desired group name and press the right soft key  
.
Groups. Your existing groups appear in the display.  
OK  
Options. Highlight New TXT Msg and press  
.
4. Use the down navigation key to highlight the contacts in the group you  
OK  
want to send a message. Press  
selection to send messages to.  
to place a checkmark next to each  
5. Press the left soft key  
Done after selecting up to 10 contacts.  
Note: You can mark up to 10 members of a group for message distribution. If you try and mark an 11th  
member, you’ll be notified that “MAXIMUM NUMBER OF RECIPIENTS IS 10”.  
6. Press the down navigation key to place the cursor in the Text field.  
7. Enter the content of your message using the keypad.  
OK  
8. To send the text message, press  
SEND.  
Understanding Your Contacts 58  
   
Send a Picture Message to Members of a Group  
Note: Only available within Verizon Wireless Enhanced Services Area.  
OK  
1. From the main screen, press  
MENU,  
Contacts is highlighted  
OK  
and press  
2. Press  
3. Highlight the desired group name and press the right soft key  
.
Groups. Your existing groups appear in the display.  
OK  
Options. Highlight New Picture Msg and press  
.
4. Use the down navigation key to highlight the contacts in the group to which  
OK  
you want to send a message. Press  
each selection to send messages to.  
to place a checkmark next to  
5. Press the left soft key  
Done after selecting up to 10 contacts.  
6. Press the down navigation key to move the cursor into the following entry  
fields:  
• Text: Add text to the Picture Message.  
• Picture: Add an image from the My Pictures gallery to the message.  
• Sound: Add sound to the Picture Message.  
• Subject: Add a subject to the Picture Message.  
• Name Card: Attach a Name Card or an entry in your Contacts to the message.  
7. Once you’ve finished adding the desired content to your Picture Message,  
OK  
press  
SEND to send the Picture Message to the intended recipients.  
Send a Video Message to Members of a Group  
Note: Only available within Verizon Wireless Enhanced Services Area.  
OK  
1. From the main screen, press  
MENU,  
Contacts is highlighted  
OK  
and press  
2. Press  
3. Highlight the desired group name and press the right soft key  
.
Groups. Your existing groups appear in the display.  
OK  
Options. Highlight New Video Msg and press  
.
4. Use the down navigation key to highlight the contacts in the group to which  
OK  
you want to send a message. Press  
each selection to send messages to.  
to place a checkmark next to  
5. Press the left soft key  
Done after selecting up to 10 contacts.  
59  
 
Finding a Contacts Entry  
6. Press the down navigation key to move the cursor into the following entry  
fields:  
• Text: Add text to the Video Message.  
• Video: Add an image from the My Videos gallery to the message.  
• Subject: Add a subject to the Video Message.  
• Name Card: Attach a Name Card or an entry in your Contacts to the message.  
7. Once you’ve finished adding the desired content to your Video Message,  
OK  
press  
SEND to send the Video Message to the intended recipients.  
Finding a Contacts Entry  
From the main screen, you can quickly open the Contacts list. Contacts is a quick  
way of viewing entries you’ve stored in the Contacts list.  
1. From the main screen, press the right soft key  
Contacts. The  
Contact List displays.  
2. In the Go To field, enter the first and second letters of the name you wish  
to search until it is highlighted.  
Editing an Existing Contact Entry  
OK  
1. From the main screen, press  
MENU,  
Contacts is highlighted  
OK  
and press  
2. Press  
3. Use the navigation key to highlight the contact list entry and press the left  
soft key Edit.  
.
Contact List.  
4. Use the navigation key to highlight the name, number, Email address, or  
other field that you wish to edit.  
CLR  
5. Press  
to backspace and delete numbers, text, or symbols.  
CLR  
6. Press and hold  
to erase all numbers in the highlighted field.  
7. Use the keypad to re-enter numbers, text, or symbols.  
OK  
8. When you’re finished editing the entry, press  
SAVE. Your changes are  
saved.  
Deleting a Contact Entry  
OK  
1. From the main screen, press  
MENU,  
Contacts is highlighted  
OK  
and press  
.
2. Press  
Contact List.  
OK  
3. Use the navigation key to display the contact list entry and press  
VIEW.  
Understanding Your Contacts 60  
             
4. Press the left soft key  
Erase.  
5. A pop-up “ERASE ENTRY?” screen displays.  
OK  
6. Highlight Yes or No, then press  
Speed Dialing  
.
Note: 1-Touch, 2-Touch, and 3-Touch dialing allows you to call numbers stored in your Contact List  
quicker.  
Speed dialing allows you to press and hold a key (or keys) to dial the number  
associated with those key(s). There are three types of speed dialing; 1-touch,  
2-touch, and 3-touch dialing.  
Note: Memory location 001 is reserved for voicemail.  
1-touch dialing  
Call phone numbers assigned to memory locations 002 - 009 by pressing and  
holding the any of the 2 - 9 keys. For example, to speed dial the number assigned to  
location 2, press and hold  
and the number is dialed.  
until the name and number appear in the display  
2-touch dialing  
Call phone numbers assigned to keys 010 through 099 by briefly pressing the first  
key, then pressing and holding the second key. For example, to speed dial the  
@
number assigned to 013, briefly press  
number dials.  
, then press and hold  
until the  
3-touch dialing  
Call phone numbers assigned to memory locations 100 through 999 by briefly  
pressing the first and second keys, then pressing and holding the third key. For  
@
@
example, to dial location number 113, briefly press  
hold until the number dials.  
Assign a speed dial location  
, then press and  
OK  
1. From the main screen, press  
MENU,  
Contacts is highlighted  
OK  
and press  
.
2. Press  
Speed Dials. The Speed Dials screen displays with the first  
available number highlighted.  
3. Use the navigation keys to highlight the number you wish to assign or enter  
OK  
the speed dial location using the keypad, press  
SET.  
61  
                 
My Name Card  
4. The SET SPEED DIAL screen displays.  
OK  
5. Use the navigation keys to highlight the entry you want, then press  
.
6. At the pop-up screen, use the navigation key to highlight Yes or No and  
OK  
press  
.
7. Continue to assign speed dial entries or press  
END  
to return to the main  
screen.  
My Name Card  
My Name Card allows you to create a virtual business card. Once completed, you  
can send the card to recipients as a vCard attachment.  
OK  
1. From the main screen, press  
MENU,  
Contacts is highlighted  
OK  
and press  
.
2. Press  
My Name Card.  
3. My Name Card opens with the Name field highlighted.  
4. Enter information in each of the fields as desired. Use the navigation key to  
move between fields, then use the keypad to enter information.  
Note: A check mark appears to the left of selected contacts.  
OK  
5. When finished, press  
to save the Name Card.  
Sending Contact Information (vCard) to another Bluetooth  
enabled phone  
You can send individual contacts or your entire contact list to or from another device  
that is Bluetooth enabled*.  
Note: *If Bluetooth is not powered on, or your Gleam is not paired with another device see "On/Off" on  
Important!: Not all Bluetooth devices will accept a name card.  
1. From the main screen, press right soft key  
Contacts.  
2. Highlight a contact and press right soft key  
Options.  
3. Press  
Send Name Card. The following options display:  
• TXT Message: Allows you to send a name card via TXT Message. A name  
card with a picture cannot be sent in a TXT Message because it exceeds the  
maximum number of characters allowed.  
• Picture Message: Allows you to send a name card via Picture Message.  
Understanding Your Contacts 62  
   
• Video Message: Allows you to send a name card via Video Message.  
• Bluetooth: Allows you to send a name card to a Bluetooth enabled device.  
4. Press  
Bluetooth.  
OK  
5. Highlight the desired contact and press  
MARK. To choose all  
contacts, press right soft key  
Mark All.**  
6. When finished, press left soft key  
Done.  
K
O
7. Highlight the destination device an press  
.
Note: If your Gleam is not paired already with the destination device, follow the instructions on p.90 for  
Bluetooth Search.  
OK  
8. Highlight Yes to connect to the other device and press  
K
.
O
9. The other device will ask to connect. Press  
.
10. CONNECTING” appears in the display.  
11. When the information is exchanged, a message will appear that the  
transfer is complete.  
Note: ** All information will be transferred except for group name , ringtone, and Emergency (ICE) contact  
reference..  
Finding My Phone Number  
My Number displays the ten-digit number assigned to your phone.  
O
K
1. From the main screen, press  
key to highlight Settings & Tools and press  
2. Press Phone Info.  
3. Press My Number. The mobile device, phone number, and mobile  
identification number are displayed.  
MENU, then press the right navigation  
OK  
.
@
63  
   
Emergency Contacts  
Emergency Contacts  
Adding Emergency Contacts  
1. From the main screen, press the right soft key  
Contacts.  
OK  
2. In Case of Emergency is highlighted, press  
VIEW.  
OK  
3. Highlight a contact location and press  
ADD.  
Note: Use the Personal Info option to enter information such as illnesses, allergies, and other detail  
information.  
Understanding Your Contacts 64  
 
@
4. Press  
From Contacts to add an emergency number from your  
OK  
contacts list. Select a Contact and press  
.
Press  
New Contact to enter a new contact as an emergency  
OK  
number. Enter Contact information and press  
SAVE.  
5. The Emergency Contact is added and is displayed in the Contact List in red  
font.  
65  
Emergency Contacts  
Deleting an Emergency Contact  
1. From the main screen, press the right soft key  
2. Highlight the Emergency Contact you want to delete.  
Contacts.  
Note: Emergency contacts are displayed in red font.  
3. Press the right soft key  
Options.  
4. Press Unassign ICE Contact.  
5. The “UNASSIGN ICE CONTACT?” confirmation screen appears in the  
display.  
OK  
OK  
6. Yes is higlighted, press  
return to your contact list.  
to confirm or highlight No and press  
to  
Understanding Your Contacts 66  
Section 7: Messaging  
Topics Covered  
Creating and Sending Picture Messages  
Creating and Sending Video Messages  
Receiving Picture Messages  
Receiving Video Messages  
Message Folders  
Changing Message Settings  
Voicemail  
Email  
Mobile IM  
Chat  
This section allows you to send or receive different types of messages. It also  
includes the features and functionality associated with messaging.  
Types of Messages  
Your phone is capable of sending Email, text, picture and video messages. Send  
Email, Mobile Instant Messages (IM), text, picture, and video messages by simply  
entering the Email address or the phone number of the recipient in the To: <.........>  
or Send To field when creating a new message.  
67  
       
Retrieving New Messages  
Retrieving New Messages  
While text messages from other phones are delivered directly to your phone, Picture  
and Video messages and Email will be stored in the Inbox of the message server and  
the server will alert you to new messages. Therefore you need to retrieve new  
messages to your phone and read them on the phone.  
Retrieving a Text Message  
When you receive a message the message ringer sounds, (unless turned off), and  
New Text Message appears in the display along with the closed envelope icon  
The date and time of the message also appear in the display.  
.
OK  
1. Press  
to View now, or press the down navigation key to highlight  
OK  
View later and press  
. The message is saved to your Inbox where you  
can view it later.  
2. With the message open, press the right soft key  
Options to  
Forward, Reply w. Copy, Save Quick Text, Lock, Add To Contacts or view  
Message Info, Number & Address, and Messaging Font Size. Press the left  
soft key  
Erase to erase the message.  
K
O
3. With the message open, press  
REPLY to return a message to the  
sender.  
Creating and Sending Text Messages  
You can send text messages to another mobile phone or to an Email address.  
1. From the main screen, press the left soft key  
Message.  
@
2. Press  
New Message.  
TXT Message to compose a new text message.  
@
3. Press  
4. Enter the phone number or Email address of the recipient. At any point  
while entering your recipient(s) phone number or Email address, press the  
left soft key  
123 or the right soft key  
Add soft keys to  
display additional options.  
Press the left soft key  
Word, Abc, ABC, 123, Symbols and Shortcuts modes of text entry.  
123 to change Text Entry Mode. Choose  
Press the right soft key  
Recent Calls or Groups.  
Add to add a recipient From Contacts,  
CLR  
Note: If you do not select an option press the  
to return to your message.  
Messaging 68  
         
OK  
5. Press the down navigation key or  
key to move to the Text field. In the  
text field, compose your message using the keypad. At any point while  
composing a message, press the left soft key  
Abc or the right  
soft key  
Options soft keys to display additional options.  
Press the left soft key  
Word, Abc, ABC,123, and Symbols modes of text entry.  
Abc to change Text Entry Mode. Choose  
Press the right soft key  
Options to display a pop-up menu with  
the options listed:  
• Save As Draft: Save the message to your Draft folder.  
• Add Graphic: Lists preloaded and downloaded graphics.  
• Add Animation: Lists preloaded and downloaded animations.  
• Add Sound: Lists preloaded and downloaded sounds.  
• Add Quick Text: Choose from up to 12 pre-loaded messages. You can add 15  
additional messages by pressing the right soft key  
Quick Text messages by pressing the left soft key  
New and you can erase  
Erase.  
• Add Name Card: Attach My Name Card information or information from one of  
your Contacts.  
• Edit Text Format: Allows you to edit the text size, alignment, style, color, and  
background color.  
• Priority Level: Save the message with a High or Normal priority.  
• Callback #: Provides the ability to send a callback # with the message.  
• Validity Period: Allows you to enter a fixed date and time for which this  
message is valid.  
• Enh. Delivery Ack: Displays a pop-up screen notifying the message sent has  
been received.  
• Cancel Msg: Cancels the message and allows you to save it in the Drafts  
folder.  
CLR  
Note: If you do not select an option press the  
to return to your message.  
OK  
6. Use the navigation key to highlight an option. Press  
to perform the  
function for the option, or to enter its sub-menu.  
OK  
7. To send the message, press  
SEND.  
69  
Creating and Sending Picture Messages  
Creating and Sending Picture Messages  
Note: Only available within Verizon Wireless Enhanced Services Area.  
Picture Message combines text, picture, and sound creating an intuitive message.  
This is also known as Multimedia Messaging (MMS).  
1. From the main screen, press the left soft key  
Message.  
@
2. Press  
New Message.  
3. Press  
Picture Message.  
4. Enter the phone number or Email address of the recipient. At any point  
while entering your recipient(s) phone number or Email address, press the  
left soft key  
123 or the right soft key  
Add soft keys to  
display additional options.  
Press the left soft key  
Word, Abc, ABC, 123, Symbols and Shortcuts modes of text entry.  
123 to change Text Entry Mode. Choose  
Press the right soft key Add to add a recipient From Contacts,  
Groups, Recent Calls, or To PIX Place.  
CLR  
Note: If you do not select an option press the  
to return to your message.  
OK  
5. Press the down navigation key or  
key to move to the Text field. In the  
text field, compose your message using the keypad. At any point while  
composing a message, press the left soft key Abc or the  
right soft key  
Options soft keys to display additional options.  
Press the left soft key  
Word, Abc, ABC,123, and Symbols modes of text entry.  
Abc to change Text Entry Mode. Choose  
Press the right soft key  
Options to display a pop-up menu with  
the options listed:  
• Preview: Shows the message before it is sent.  
• Save As Draft: Save the message to your Draft folder.  
• Add Quick Text: Choose from up to 12 pre-loaded messages. You can add 15  
additional messages by pressing the right soft key  
Quick Text messages by pressing the left soft key  
New and you can erase  
Erase.  
• Priority Level: Save the message with a High or Normal priority.  
• Validity Period: Allows you to enter a fixed date and time for which this  
message is valid.  
• Cancel Msg: Cancels the message and allows you to save it in the Drafts  
folder.  
Messaging 70  
   
CLR  
Note: If you do not select an option press the  
to return to your message.  
6. Press the down navigation key to highlight the Picture field. Press the left  
soft key My Pics to add a picture, and follow the prompts. Press  
to attach the highlighted image.  
7. Press the down navigation key to highlight the Sound field. Press the left  
soft key Sounds to select a sound.  
Press the up/down navigation key to highlight the desired sound or  
OK  
OK  
highlight Record New to record a sound and press  
.
8. Press the down navigation key to highlight the Subject field. Press the left  
soft key  
Abc to change entry mode. Press the right soft key  
Options to Add Quick Text. Press the up/down navigation key to  
OK  
highlight the desired Quick Text phrase, and press  
.
9. Press the down navigation key to add Name Card. Press the left soft key  
Add to select My Name Card or an entry from your Contacts  
OK  
list. Follow the prompts and press  
to insert.  
OK  
10. Once all fields are complete, press  
to send the message to the  
intended recipient(s).  
Creating and Sending Video Messages  
Video Message combines text, and video creating an intuitive message. This is also  
known as Multimedia Messaging (MMS).  
1. From the main screen, press the left soft key  
Message.  
@
2. Press  
New Message.  
3. Press  
Video Message.  
4. Enter the phone number or Email address of the recipient. At any point  
while entering your recipient(s) phone number or Email address, press the  
left soft key  
123 or the right soft key  
Add soft keys to  
display additional options.  
Press the left soft key  
Word, Abc, ABC, 123, Symbols and Shortcuts modes of text entry.  
123 to change Text Entry Mode. Choose  
Press the right soft key Add to add a recipient From Contacts,  
Groups, Recent Calls, or To PIX Place.  
CLR  
Note: If you do not select an option press the  
to return to your message.  
71  
     
Creating and Sending Video Messages  
OK  
5. Press the down navigation key or  
key to move to the Text field. In the  
text field, compose your message using the keypad. At any point while  
composing a message, press the left soft key Abc or the  
right soft key  
Options soft keys to display additional options.  
Press the left soft key  
Word, Abc, ABC,123, and Symbols modes of text entry.  
Abc to change Text Entry Mode. Choose  
Press the right soft key  
Options to display a pop-up menu with  
the options listed:  
• Preview: Shows the message before it is sent.  
• Save As Draft: Save the message to your Draft folder.  
• Add Quick Text: Choose from up to 12 pre-loaded messages. You can add 15  
additional messages by pressing the right soft key  
Quick Text messages by pressing the left soft key  
New and you can erase  
Erase.  
• Priority Level: Save the message with a High or Normal priority.  
• Validity Period: Allows you to enter a fixed date and time for which this  
message is valid.  
• Cancel Msg: Cancels the message and allows you to save it in the Drafts  
folder.  
CLR  
Note: If you do not select an option press the  
to return to your message.  
6. Press the down navigation key to highlight the Video field. Press the left  
soft key Videos to add a video, and follow the prompts. Press  
to attach the highlighted video.  
7. Press the down navigation key to highlight the Subject field. Press the left  
OK  
soft key  
Abc to change entry mode. Press the right soft key  
Options to Add Quick Text. Press the up/down navigation key to  
OK  
highlight the desired Quick Text phrase, and press  
.
8. Press the down navigation key to add Name Card. Press the left soft key  
Add to select My Name Card or an entry from your Contacts  
OK  
list. Follow the prompts and press  
to insert.  
OK  
9. Once all fields are complete, press  
to send the message to the  
intended recipient(s).  
Messaging 72  
Receiving Picture Messages  
When you receive a new Picture Message, NEW PIC-VIDEO MSG appears in the  
display along with the options View Now, or View Later.  
Note: For the option Reject to appear in the display when you receive a Picture Message, Auto Receive  
mode must be set to Off in the Message Settings menu. The default Auto Receive value is set to On.  
OK  
1. When you receive a new Picture Message, press  
View Now.  
2. After loading, the image (and text if any) contained in the Picture Message  
appears in the display.  
3. Use the navigation keys to scroll through the message or view the entire  
picture if necessary.  
4. Press the left soft key  
byte) or the right soft key  
appear in the display:  
Mute/Unmute (to play the attached sound  
Options. The following options may  
• Play Again: Replays the sound in the message.  
• Forward: Forward the message to another recipient.  
• Erase: Deletes the message.  
• Save Picture: Saves the picture in a Picture message to My Picture  
• Save As Ringtone: Saves the sound byte received with the message as a  
ringtone.  
• Save Sound: Saves the sound received with the message.  
• Save Quick Text: Saves the text received in the message to the Quick Text list.  
• Save Name Card: Saves the attached name card to your Contact List.  
• Lock/Unlock: Locks or unlocks the entry to prevent accidental deletion.  
• Add To Contacts: Save the number of the sender to your Contacts as a new  
entry or add to an existing entry.  
• Message Info: Provides the following information: From and Callback #,  
Priority, Message Type, Size and Attachment(s) name and size.  
• Number & Address: Displays the number and/or address of the sender.  
Note: When viewing a Picture message, you can view the previous Picture message by pressing the left  
navigation key and view the next Picture message by pressing the right navigation key.  
73  
   
Receiving Video Messages  
Receiving Video Messages  
When you receive a new Video Message, NEW PIC-VIDEO MSG appears in the  
display along with the options View Now, or View Later.  
Note: For the option Reject to appear in the display when you receive a Video Message, Auto Receive mode  
must be set to Off in the Message Settings menu. The default Auto Receive value is set to On.  
OK  
1. When you receive a new Video Message, press  
View Now.  
2. After loading, the image (and text if any) contained in the Video Message  
appears in the display.  
OK  
3. Press  
PLAY to play the video.  
4. Use the navigation keys to scroll through the message.  
5. Press the left soft key  
right soft key  
Erase to erase the message or the  
Options. The following options may appear in the  
display:  
• Reply: Replies to the received message.  
• Forward: Forward the message to another recipient.  
• Save Video: Saves the video in a Video message to Videos.  
• Save Quick Text: Saves the text received in the message to the Quick Text list.  
• Save Name Card: Saves the attached name card to your Contact List.  
• Lock/Unlock: Locks or unlocks the entry to prevent accidental deletion.  
• Add To Contacts: Save the number of the sender to your Contacts as a new  
entry or add to an existing entry.  
• Message Info: Provides the following information: From and Callback #,  
Priority, Message Type, Size and Attachment(s) name and size.  
• Number & Address: Displays the number and/or address of the sender.  
Note: When viewing a Video message, you can view the previous Video message by pressing the left  
navigation key and view the next Video message by pressing the right navigation key.  
Messaging 74  
   
Receive Messages While in a Call  
1. When you receive a message while in a call, the NEW TXT MESSAGE or  
OK  
NEW PIC-VIDEO MSG(S) dialog box appears in the display. Press  
View now, or press the up/down navigation key to highlight View later  
to  
OK  
and press  
.
Note: Text messages can only be viewed during a call. Picture-Video messages can not be downloaded  
during a call.  
2. You can view a text message without disconnecting your call by pressing  
the right soft key Options and then select Messaging.  
3. Press Inbox, use the up/down navigation keys to highlight the  
message you want to view and press  
View a Picture-Video Message Later  
1. When you receive a new Picture-Video message that you would like to view  
OK  
OPEN to view the message.  
OK  
later, highlight View Later and press  
2. To view the message, press the left soft key  
3. Press  
4. Use up/down the navigation key to highlight the unopened message, then  
.
Message  
.
Inbox  
OK  
press  
OPEN. The INBOX screen appears first with information about  
OK  
the message. Press  
DOWNLOAD to view Picture-Video message.  
Message Folders  
Your phone provides default message folders for your Text and Picture-Video  
messages.  
Note: To quickly view all messages in the Inbox, Sent, or Drafts folders, open one message and then press  
the right navigation key to view the next message or press the left navigation key to view the  
previous message.  
Inbox  
Received messages of all types are stored in the Inbox folder.  
1. From the main screen, press the left soft key  
2. Press Inbox.  
3. Use the navigation key to highlight the message that you wish to view.  
Message.  
OK  
4. Press  
OPEN to view contents of the highlighted message.  
75  
             
Message Folders  
5. While viewing a message press the right soft key  
Options to  
display the available options. Options are dependent on the message type:  
For Text Messages the following options may appear in the display:  
-
Forward: Forwards the message to another recipient.  
-
Reply w. Copy: Replies to the received message with a text message, picture  
message or video message and allows you to send a copy of the message to  
another contact.  
-
Save Quick Text: Saves the text received in the message to the Quick Text  
list.  
-
-
Lock/Unlock: Locks or unlocks the entry to prevent accidental deletion.  
Add to contacts: Saves the number of the sender to your Contacts as a new  
entry or add to an existing entry.  
-
-
-
Message Info: Provides the following information: From (also provides the  
date and time the message was sent), Callback #, Priority, Message Type, Size  
and if a Picture, Sound or Name Card were included in the message.  
Number & Address: Allows you to view the number and/or address of the  
sender of the message. Press left soft key  
to your contacts or press to call the sender.  
Save to save the number  
OK  
Messaging Font Size: Allows you to select the font size of the message  
being viewed. Select Normal, Small, or Large.  
For Picture Messages the following options may appear in the display:  
-
-
-
Play Again: Replays the sound byte attached to a Picture Message.  
Forward: Forwards the message to another recipient.  
Erase: Deletes the message. Only displays in menu when a sound byte isn’t  
attached to the message that was sent.  
-
-
Save Picture: Saves the picture sent in a Picture message to My Pictures.  
Save As Ringtone: Saves the sound byte received with the message as a  
ringtone.  
-
-
Save Sound: Saves the sound byte received with the message in My Sounds.  
Save Quick Text: Saves the text received in the message to the Quick Text  
list.  
-
-
-
Save Name Card: Saves the attached name card to your Contact List.  
Lock/Unlock: Locks or unlocks the entry to prevent accidental deletion.  
Add To Contacts: Save the number of the sender to your Contacts as a new  
entry or add to an existing entry.  
-
-
Message Info: Provides the following information: From (also provides the  
date and time the message was sent), Callback #, Priority, Message Type, Size  
and if a Picture, Sound or Name Card were included in the message.  
Number & Address: Displays the name and/or address of the sender.  
Messaging 76  
For Video Messages the following options may appear in the display:  
-
-
-
-
Reply: Replies to the received message.  
Forward: Forwards the message to another recipient.  
Save Video: Saves the video received with the message in Videos.  
Save Quick Text: Saves the text received in the message to the Quick Text  
list.  
-
-
-
Save Name Card: Saves the attached name card to your Contact List.  
Lock/Unlock: Locks or unlocks the entry to prevent accidental deletion.  
Add To Contacts: Save the number of the sender to your Contacts as a new  
entry or add to an existing entry  
-
-
Message Info: Provides the following information: From (also provides the  
date and time the message was sent), Callback #, Priority, Message Type, Size  
and if a Picture, Sound or Name Card were included in the message.  
Number & Address: Saves the name and number of the sender in your  
contact list.  
Note: If no sound byte is attached to the message, press the left soft key  
Erase to delete the  
message.  
Press the left soft key  
to the message.  
Mute/Unmute/Play to play or mute/unmute the sound byte attached  
OK  
6. Press  
PLAY to play the message.  
Note: When the Inbox exceeds 100 text messages, the first message in the list is replaced with the next  
incoming message. Picture messages are replaced when a maximum of 500 is reached.For  
information on how to set Auto Erase and Auto Receive see "Changing Message Settings" on page  
Sent  
Your phone stores messages in the Sent folder, regardless of whether the message  
was successfully transmitted. Verify if and when a message or Email was  
successfully transmitted by enabling the Enh. Delivery Ack feature in Message  
Settings.  
Note: Enhanced Delivery Acknowledgement can't be set for Picture-Video message.  
77  
 
Message Folders  
Review Messages in the Sent Folder  
1. From the main screen, press the left soft key  
Message.  
2. Press  
Sent.  
3. Use the navigation key to highlight the message you wish to review, then  
OK  
press  
OPEN.  
4. While viewing the message, press the right soft key  
Options to  
display options listed. Options are dependent on the type of message:  
For Text Messages the following options may appear in the display:  
-
Forward: Forwards the message to another recipient.  
-
Lock/Unlock: Locks or unlocks the entry to prevent accidental deletion.  
-
-
-
Save Quick Text: Saves the text sent in the message to the Quick Text list.  
Add To Contacts: Adds the sender’s information to your contact list.  
Message Info: Provides the following information: Send To Number (also  
provides the date and time the message was sent), Priority, Message Type, Size,  
Attachment(s) (if a Graphic, Sound or Name Card were included in the message),  
Status, and Error Code.  
For Picture Messages the following options may appear in the display:  
-
-
-
Play Again: Replays the sound in the message.  
Forward: Forwards the message to another recipient.  
Erase: Deletes the message. Only displays in menu when a sound byte isn’t  
attached to the message that was sent.  
-
-
-
-
Lock/Unlock: Locks or unlocks the entry to prevent accidental deletion.  
Save Quick Text: Saves the text sent in the message to the Quick Text list.  
Add To Contacts: Adds the sender’s information to your contact list.  
Message Info: Provides the following information: Send To Number (also  
provides the date and time the message was sent), Priority, Message Type, Size,  
Attachment(s) (if a Graphic, Sound or Name Card were included in the message),  
Status, and Error Code.  
For Video Message the following options may appear in the display:  
-
-
-
-
-
-
-
Forward: Forwards the message to another recipient.  
Resend: Allows you to resend the message.  
Lock/Unlock: Locks or unlocks the entry to prevent accidental deletion.  
Save Quick Text: Saves the text sent in the message to the Quick Text list.  
Save Name Card: Saves the attached name card to your Contact List.  
Add To Contacts: Adds the sender’s information to your contact list.  
Message Info: Provides the following information: Send To Number (also  
provides the date and time the message was sent), Priority, Message Type, Size,  
Attachment(s) (if a Graphic, Sound or Name Card were included in the message),  
Status, and Error Code.  
Messaging 78  
   
Note: If no sound byte is attached to the message, press the left soft key  
Erase to delete the  
message.  
Press the left soft key  
attached to the picture message.  
Mute/Unmute/Play to play or mute/unmute the sound byte  
5. Use the navigation key to highlight the desired option.  
O
K
6. Press  
to perform the function for the highlighted option.  
Erase to delete the  
7. From the Sent menu, press the left soft key  
message from the Sent folder. Highlight Yes to delete, or No to return to  
the Sent menu.  
Drafts  
Draft messages are those that have been composed but never sent. You can return  
to the Drafts folder at any time to view, edit, or send a draft message.  
Create a Draft Text Message  
1. From the main screen, press the left soft key  
Message.  
@
2. Press  
New Message.  
3. Select the type of message you want to create.  
4. Enter the phone number of the recipient, then press the down navigation  
key.  
5. Compose your message using the keypad, then press the right soft key  
Options. A pop-up menu appears in the display.  
6. Scroll down with the navigation key until Save As Draft is highlighted, then  
OK  
press  
. A confirmation message appears in the display and your  
message is saved to the Drafts folder.  
View and Edit Draft Messages  
1. From the main screen, press the left soft key  
Message.  
2. Press  
Drafts.  
3. Use the navigation key to highlight the message you wish to view, then  
OK  
press  
EDIT. The message opens in the Text field with the message  
text displayed.  
CLR  
4. Press  
to backspace and delete any characters in the display, if  
CLR  
desired. Press and hold  
to erase all characters in the field.  
5. Press the right soft key  
Options. A pop-up menu appears in the  
display with the options listed.  
79  
 
Message Folders  
For Text Messages the following options may appear in the display:  
-
-
-
-
-
Save As Draft: Save the message to your Draft folder.  
Add Graphic: Lists preloaded and downloaded graphics.  
Add Animation: Lists preloaded and downloaded animations.  
Add Sound: Lists preloaded and downloaded sounds.  
Add Quick Text: Choose from up to 12 pre-loaded messages. You can add 15  
additional messages by pressing the right soft key  
erase Quick Text messages by pressing the left soft key  
New and you can  
Erase.  
-
-
Add Name Card: Attach My Name Card information or information from one of  
your Contacts.  
Edit Text Format: Allows you to edit the text size, alignment, style, color, and  
background color.  
-
-
-
Priority Level: Save the message with a High or Normal priority.  
Callback #: Provides the ability to send a callback # with the message.  
Validity Period: Allows you to enter a fixed date and time for which this  
message is valid.  
-
-
Enh. Delivery Ack: Displays a pop-up screen notifying the message sent has  
been received.  
Cancel Msg: Cancels the message and allows you to save it in the Drafts folder.  
For Picture-Video Messages the following options may appear in the display:  
-
-
-
Preview: Allows you to preview the message.  
Save As Draft: Save the message to your Draft folder.  
Add Quick Text: Choose from up to 12 pre-loaded messages. You can add  
15 additional messages by pressing the right soft key  
New and you  
Erase.  
can erase Quick Text messages by pressing the left soft key  
-
-
Priority Level: Save the message with a High or Normal priority.  
Validity Period: Allows you to enter a fixed date and time for which this  
message is valid.  
-
Cancel Msg: Cancels the message and allows you to save it in the Drafts  
folder.  
OK  
6. Use the navigation key to highlight the desired option. Press  
to  
perform the function for the highlighted option.  
7. Press the down navigation key to highlight the following fields for Picture-  
Video Messages and press the right soft key  
the following options:  
Options to display  
• Picture-Video: Insert a picture-video clip.  
Note: Press the left soft key  
My Pics-Videos to add a new picture or video clip.  
-
Preview: Allows you to preview the message.  
Messaging 80  
-
-
-
Save As Draft: Save the message to your Draft folder.  
Priority Level: Save the message with a High or Normal priority.  
Validity Period: Allows you to enter a fixed date and time for which this  
message is valid.  
-
-
Remove Picture-Video: Deletes the attached Picture-Video file.  
Cancel Msg: Cancels the message and allows you to save it in the Drafts  
folder.  
• Sound: Insert a sound byte.  
Note: Press the left soft key  
Sounds to add a new sound byte.  
-
Preview: Allows you to preview the message.  
-
-
-
Save As Draft: Save the message to your Draft folder.  
Priority Level: Save the message with a High or Normal priority.  
Validity Period: Allows you to enter a fixed date and time for which this  
message is valid.  
-
-
Remove Sound: Deletes the attached sound byte file.  
Cancel Msg: Cancels the message and allows you to save it in the Drafts  
folder.  
• Subject: Insert the subject of your message.  
Note: Press the left soft key  
Abc to change text entry mode.  
-
-
-
Preview: Allows you to preview the message.  
Save As Draft: Save the message to your Draft folder.  
Add Quick Text: Choose from up to 12 pre-loaded messages. You can add  
15 additional messages by pressing the right soft key  
New and you  
Erase.  
can erase Quick Text messages by pressing the left soft key  
-
-
Priority Level: Save the message with a High or Normal priority.  
Validity Period: Allows you to enter a fixed date and time for which this  
message is valid.  
-
Cancel Msg: Cancels the message and allows you to save it in the Drafts  
folder.  
• Name Card: Insert and name card.  
Note: Press the left soft key  
Add to add a name card.  
-
-
-
Preview: Allows you to preview the message.  
Save As Draft: Save the message to your Draft folder.  
Priority Level: Save the message with a High or Normal priority.  
81  
Changing Message Settings  
-
Validity Period: Allows you to enter a fixed date and time for which this  
message is valid.  
-
-
Remove Name Card: Deletes the name card.  
Cancel Msg: Cancels the message and allows you to save it in the Drafts  
folder.  
OK  
8. Use the navigation key to highlight the desired option. Press  
to  
perform the function for the highlighted option.  
OK  
9. Once you’ve returned to the message composer, press  
to send the  
message, if desired.  
Erase Options  
You can erase unlocked messages in your Inbox, Drafts folder, or Sent folder.  
Locked messages are not erased.  
To erase messages:  
1. From the main screen, press the left soft key,  
2. Press the right soft key Options.  
Message.  
3. The following options are available:  
• Erase Inbox: Erases unlocked messages in your Inbox.  
• Erase Drafts: Erases unlocked messages in your Drafts folder.  
• Erase Sent: Erases unlocked messages in your Sent folder.  
• Erase All: Erases unlocked messages in all message folders  
(Inbox, Drafts and Sent).  
Changing Message Settings  
This menu allows you to define settings for messages sent or received on your  
phone. To access your message settings, use the following steps:  
1. From the main screen, press the left soft key,  
2. Press the left soft key Settings.  
Message.  
OK  
3. Select the message type you would like to change and press  
. Choose  
from the following options:  
• Entry Mode: Sets the default entry mode for messaging. Choose from Word, Abc,  
ABC, or 123.  
• Auto Save Sent: Saves all messages sent. Use the navigation keys to select On,  
Off, or Prompt.  
Messaging 82  
     
• Auto Erase Inbox: Erases the oldest message of the same type (Text or Picture-  
Video) when the maximum number of received messages of that type is exceeded in  
the Inbox. For example, When the Inbox exceeds 100 text messages, the first  
message in the list is replaced with the next incoming message. Picture  
messages are replaced when a maximum of 500 is reached.Choose from On  
or Off.  
• Messaging Font Size: Allows you to set the message font size for message  
received.  
• TXT Auto View: Automatically displays the text message when received. Choose  
from On or Off.  
• Pic-Video Auto Receive: Automatically receives picture and video messages  
into your inbox. Choose from On or Off.  
• Quick Text: Displays the Quick Text pre-defined entries for Text Message and  
Picture-Video Message. Press the right soft key  
New to add to the Quick  
Text list or press the left soft key  
Erase to erase. Enter your new text and  
OK  
press  
. The new Quick Text item shows in the first position of the list.  
• Voice Mail #: Enter the speed dial entry set for your voicemail.  
• Callback #: Allows you to use or edit the number assigned to your handset.  
Choose from On or Off.  
• Signature: Adds the signature text to each message sent. Choose from None or  
Custom.  
Voicemail  
New voicemail alerts are sent via a free Text message. These messages indicate  
how many new and urgent voicemails are in your voice mailbox. Open the free text  
message to view the number of new and urgent voice messages in your voice  
mailbox. If a caller leaves a callback number, this number will also be sent via Text  
message.  
Note: Standard Text Messaging charges do not apply.  
Receive Voicemail Messages  
When you receive a new voicemail message you’ll hear a sound and an Text  
message appears in the display.  
1. Press the up/down navigation keys to select Listen Now or Listen Later.  
K
O
2. Press  
.
83  
     
Mobile IM  
View Voicemail Messages in the Inbox Folder  
1. From the main screen, press the left soft key,  
Message.  
2. Press  
Voicemail.  
CALL to dial voicemail and retrieve your message(s).  
OK  
3. Press  
Mobile IM  
The Instant Messaging function allows you to send and receive instant messages  
using one of the following communities:  
• AOL® Instant Messenger™  
• MSN® Messenger Service  
• Yahoo!® Messenger  
Note: You must first create the Instant Message account before accessing it on your phone.  
Using Mobile IM  
1. From the main screen, press the left soft key  
2. Press Mobile IM.  
3. Highlight Mobile IM and press  
4. Select your instant message community using the left and right navigation  
Message.  
OK  
.
OK  
keys and press  
.
5. Use the on-screen application specific functions and options to use the  
instant message applications.  
Email  
This menu allows you to send and receive Email using Mobile Web. To use your  
Email, follow these steps:  
1. From the main screen, press the left soft key,  
2. Press Email.  
3. Using the up and down Navigation keys, select one of the following Email  
Message.  
OK  
providers and press  
.
• MSN® Hotmail  
• AOL® Mail  
• Yahoo!® Mail  
• Find More  
4. Use the on-screen application specific functions and options to use the  
Email applications.  
Messaging 84  
         
Chat  
You have the ability to join wireless chat rooms from your phone. Send messages  
including text and icons to many chat room participants or launch one-on-one  
(private) chat rooms.  
To access a chat room from the browser:  
1. From the main screen, press the left soft key  
2. Press Chat.  
3. Using the up and down navigation keys, select one of the following chat  
Message.  
OK  
rooms and press  
.
• LAVALIFE  
• FRIENDZ  
• LIFESTYLE  
• POWER CHAT  
• FIND MORE  
4. Use the on-screen application specific functions and options to use the  
Chat applications.  
85  
   
My Account  
Section 8: Changing Your Settings  
Topics Covered  
My Account  
Tools  
Bluetooth Menu  
Sounds Settings  
Display Settings  
Phone Settings  
Call Settings  
Memory  
Phone Info  
This section explains the sound and phone settings for your phone. It includes  
display settings, security settings, and extra settings associated with your phone.  
My Account  
The My Account menu connects to the Verizon Wireless Mobile Web. You can setup  
Favorites or choose from the available applications.  
Tools  
The Tools menu provides the ability to access the following menus:  
Changing Your Settings 86  
                         
Bluetooth Menu  
About Bluetooth  
Bluetooth is a short-range wireless communications technology capable of  
exchanging information over a distance of about 30 feet without requiring a physical  
connection.  
Unlike infrared, you don't need to line up the devices to beam information with  
Bluetooth. If the devices are within a range of one another, you can exchange  
information between them, even if they are located in different rooms.  
Note: When connected to your Bluetooth headset, press the multi-function key on the headset to use Voice  
Commands’s Voice Dial feature.  
Bluetooth Service Profiles  
Actually, the Bluetooth specification is a protocol that describes how the short-range  
wireless technology works, whereas individual profiles describe the services  
supported by individual devices. Profiles reduce the chance that different devices  
will not work together.  
Your phone supports the following Bluetooth profile services:  
Voice Calls are supported using any of the following depending on the accessory:  
• HSP - Headset  
• HFP - Hands-free profiles*.  
Transfer Object allows sending an OPP - Object Push Profile which allows transfer  
of vCard (i.e., Contact information) between devices.  
Bluetooth Stereo uses A2DP - Advanced Audio Distribution Profile and AVRCP -  
Audio/Video Remote Control Profile.  
Printing is supported using BIP - Basic Imaging or BPP - Basic Printing Profiles.  
Automobile Kits can use any of the following: HFP - Hands-free or PBAP - Phone  
Book Access Profiles*.  
Connectivity Connections (i.e. computer) are supported using SPP - Serial Port  
(connecting two BT devices) or DUN - Dial Up Networking (to access the internet).  
* For vehicle/accessory compatibility, go to www.verizonwireless.com/bluetooth  
chart. Phone does not support all Bluetooth OBEX profiles.  
The following Bluetooth options are available:  
87  
     
Bluetooth Menu  
On/Off  
When the Bluetooth radio is turned on, you can use the Bluetooth features available.  
When the Bluetooth radio is turned off, you cannot send or receive information via  
Bluetooth. To save battery life or in situations where radio use is prohibited, such as  
airline traveling, you can turn off the Bluetooth wireless technology.  
O
K
1. From the main screen, press  
key to highlight Settings & Tools and press  
2. Press Bluetooth Menu.  
3. Press the left soft key  
MENU key and use the right navigation  
OK  
.
to turn Bluetooth On or Off.  
Note: If Bluetooth is turned on, the  
Bluetooth icon displays in the top line of the display.  
Search  
This option searches for a recognized Bluetooth wireless technology device.  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
Settings & Tools and press  
.
Bluetooth Menu.  
OK  
3. Add New Device is highlighted, press  
twice.  
Note: If you have NOT already activated Bluetooth on the phone, the message  
OK  
“TURN BLUETOOTH POWER ON?” displays. Highlight Yes to activate or No to exit and press  
.
4. A list of found Bluetooth devices will be displayed. Use the Up and Down  
OK  
navigation keys to highlight a Bluetooth device. Press  
devices.  
to pair the  
5. The phone automatically attempts to send a passkey of "0000" to a hands-  
free device and shows the message "ATTEMPTING TO AUTO PAIR". If the  
default passkey is not successful, the phone will display the message  
"AUTO PAIR FAILED. ENTER PASSKEY". (If you are attempting to pair with a  
car kit, be sure to clear any error message on the car kit display first.)  
OK  
Enter the correct passkey for the device you want to pair, and press  
6. Select Yes to pair the devices. Once connected the Bluetooth Connected  
icon appears in the upper half of the display.  
7. When pairing is complete, highlight Always Ask or Always Connect and  
.
OK  
press  
.
Changing Your Settings 88  
 
Bluetooth Settings  
The Bluetooth wireless technology settings menu provides the ability to view and  
change the device name, show the visibility, and set the security for the device.  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
Settings & Tools and press  
.
Bluetooth Menu.  
3. Press the right soft key  
Options. The Bluetooth menu displays  
with the following options:  
• My Phone Name: Allows you enter a customized name.  
• Discovery Mode: Allows other users to see your accessibility. Select On for  
other devices to see your device, or Off for no visibility.  
Note: After selecting On, users have one minute to see your accessibilty. After which Discovery Mode will  
automatically default back to off.  
• Supported Profiles: Displays a list of supported Bluetooth profiles.  
Highlight a profile and press  
OK  
to view a description.  
• My Phone Info: Shows the handset information.  
Sounds Settings  
The Sounds menu provides the ability to access the following menus:  
Call Sounds  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
Settings & Tools and press  
.
Sounds Settings.  
@
3. Press  
or  
Call Sounds.  
@
Press  
Call Ringtone to get new ringtones from “Get It Now” (Get  
New Applications) or choose from pre-loaded ringtones.  
4. Press  
Call Vibrate to turn Call Vibrate On or Off.  
OK  
5. Press  
to save the setting.  
89  
     
Sounds Settings  
Alert Sounds  
1. From the main screen, press  
OK  
MENU, use the right navigation key to  
O
K
highlight  
2. Press  
3. Press  
Settings & Tools and press  
.
Sounds Settings.  
Alert Sounds. For the following options, you can set the tone  
for the message alerts. You can also set vibration on and set a reminder.  
• TXT Message: allow you to set a notification for TXT message.  
• Picture-Video Message: allow you to set a notification for Pic-Video  
message.  
• Voicemail: allow you to set a notification for Voicemail Message.  
• Device Connect: allow you to set a notification when you connect to a device.  
Keypad Sounds  
Select the sound of the keypad when pressed.  
OK  
1. From the main screen, press  
MENU, use the navigation key to  
OK  
highlight  
2. Press  
3. Press  
Settings & Tools and press  
.
Sounds Settings.  
Keypad Sounds.  
4. Use the navigation key to select Default or Xylophone.  
O
K
5. Press  
Keypad Volume  
1. From the main screen, press  
to set the new dial sound.  
OK  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
3. Press  
Settings & Tools and press  
.
Sounds Settings.  
Keypad Volume.  
4. Use the navigation key or volume key to adjust the keypad volume.  
OK  
5. Press  
SET to save.  
Changing Your Settings 90  
   
Service Alerts  
1. From the main screen, press  
OK  
MENU, use the right navigation key to  
O
K
highlight  
2. Press  
3. Press  
Service Alert On or Off.  
Settings & Tools and press  
.
Sounds Settings.  
Service Alerts. For the following options, you can turn the  
• ERI: Sounds an alert when you go into and out of your coverage areas.  
• Minute Beep: While on a call your phone beeps after every minute of usage.  
• Call Connect: Sounds an alert when a call is connected and when a call has  
ended.  
• Service Change: Allows you to turn the Service Change alert On or Off.  
Power On/Off  
1. From the main screen, press  
OK  
MENU, use the right navigation key to  
O
K
highlight  
2. Press  
3. Press  
Power Off to either On or Off.  
Display Settings  
Settings & Tools and press  
.
Sounds Settings.  
Power On/Off. You can set the sounds for Power On and  
The Display menu affects the menu style, main screen animation, backlight  
settings, and more.  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
OK  
highlight  
Settings & Tools and press  
.
2. Press  
Display Settings.  
• Banner: Create your own personalized greeting that appears in main screen or  
choose the ERI Banner which displays the network in which you have  
subscribed.  
• Backlight: Choose settings for the LCD and/or Keypad.  
• Wallpaper: Choose Pictures from My Pictures, or Videos from My Videos, or  
special "living" (animated) wallpaper to use as the background display for your  
Main Screen. Choose Pictures from My Pictures to use as the background  
display for your Front Screen.  
• Display Themes: Choose from 3 preset colors used for menu display.  
• Dial Fonts: Choose a dialing font style and size.  
• Menu Font Size: Choose a menu font size.  
• Clock Format: Choose digital or analog format for time display.  
91  
       
Display Settings  
3. Use the navigation key to highlight the display menu that you wish to edit,  
OK  
then press  
4. Use the navigation key to select an option and press  
Banner  
.
OK  
.
Banner allows you to create your own personalized greeting that appears in main  
screen. Or you can display the network to which you are subscribed.  
To create a personal banner:  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
Settings & Tools and press  
.
Display Settings.  
@
3. Press  
Banner.  
@
4. Press  
Personal Banner to create a customized banner for your  
handset.  
CLR  
Note: Press and hold  
to erase an existing banner, if necessary.  
5. Enter a word or short phrase (18 characters or less) to appear in the main  
OK  
screen and press  
to save the new banner.  
To turn on an ERI banner:  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
Settings & Tools and press  
.
Display Settings.  
@
3. Press  
Banner.  
4. Press  
to set the ERI Banner for your handset.  
K
O
5. Select On or Off and press  
.
Changing Your Settings 92  
   
Backlight  
Set the backlight for the display or keypad to remain on for a specified period of  
time or to remain on as long as the flip is open.  
Note: Prolonged backlight use drains your battery faster.  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
O
K
highlight  
2. Press  
3. Press  
Settings & Tools and press  
.
Display Settings.  
Backlight. The menus listed appear in the display.  
• Display: The following options are for the Main LCD.  
-
Duration: Can be set to 7 seconds, 15 seconds, 30 seconds, Always On, or  
Always Off.  
-
Brightness: Use the navigation key to adjust the brightness.  
• Keypad: The following options are for the keypad.  
-
-
-
-
-
7 Seconds: The keypad is on for 7 seconds.  
15 Seconds: The keypad is on for 15 seconds.  
30 Seconds: The keypad is on for 30 seconds.  
Always On: The keypad is always on.  
Always Off: The keypad is always off.  
4. Use the navigation key to highlight a menu.  
O
K
5. Press  
desired.  
Wallpaper  
1. From the main screen, press  
to enter the highlighted option’s menu and change settings as  
OK  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
Settings & Tools and press  
.
Display Settings.  
3. Press  
Wallpaper*.  
@
4. Press  
Main Screen or  
Front Screen.  
• Main Screen: Choose My Picture (allows you to select an image from the  
My Picture folder.) My Videos (allows you to select a video from the My Videos  
folder.) or Living Wallpaper (allows you to select animated wallpaper)  
• Front Screen: Choose My Pictures (allows you to select an image from the My  
Picture folder.)  
OK  
5. Use the navigation key to highlight your selection, the press  
the wallpaper that will appear in the main or front LCD display.  
to select  
93  
   
Display Settings  
Living Wallpaper*  
Warning!: Selecting Living Wallpaper may diminish battery standby time slightly.  
Living Wallpaper is new innovative wallpaper that changes according to the time of  
day. Choose from the following backgrounds:  
Note: **The default wallpaper setting is City Background.  
Default display theme setting is Cruiser.  
Default alert sound is Car horn.  
City Background**  
Country Background  
City Cruising  
Country Cruising  
Indicators  
The City Background and Country Background living wallpaper indicators display  
across the bottom bar for the following:  
City Background  
Volume has been set to one of the following: Vibrate Only, Alarm Only, All Sounds  
Off  
New message is received (and unopened)  
New voicemail is received (and unheard)  
Missed calls  
Changing Your Settings 94  
Calendar event will occur within 24 hours  
Speakerphone is turned on  
Alarm is set  
The City Cruising and Country Cruising living wallpaper indicators display on the  
right side of the main screen for the following:  
Alarm  
Message  
The number (4) denotes  
the number of un-read  
text messages in your  
Inbox.  
Missed Calls  
Speakerphone  
Voicemail Message  
Calendar Appt  
The number (3) denotes  
the number of unheard  
voicemails messages in your  
mailbox.  
Vibrate On  
City Cruising  
Gauges  
Time Gauge  
Voicemail Gauge  
Message Gauge  
95  
Display Settings  
Voicemail Gauge  
The Voicemail Gauge displays the number of unheard voicemail messages in your  
voicemail mailbox.  
The needle indicates the number of unheard messages (up to 4) in your voicemail  
box.  
The red line of the dial indicates 5 or more unheard voicemails.  
Message Gauge (Text and Multimedia)  
The Message Gauge displays the number of unopened messages.  
The needle indicates the number of unopened messages up to 10.  
The red line of the dial indicates more than 10 unopened messages.  
Important!: The difference between the dial indicator and the historical message indicator is that the  
message indicator on Background living wallpapers only displays when unread messages are  
stored on your handset. Once you look at the Inbox screen, the “message” indicator  
disappears from the Background living wallpapers (even if some of the messages are  
unopened). But on the Cruising living wallpapers, the dial will always show the number of  
unopened messages—no matter how many times you have looked at the Inbox screen.  
Time Gauge  
The Time Gauge displays the date and time in digital or analog format depending on  
the setting. When an Alarm is set, that indicator will appear next to “AM/PM” in the  
Changing Your Settings 96  
Transitioning  
Living Wallpaper transitions according to the time of day.  
Dawn (5 AM - 7 AM  
)
Day (7 AM - 5 PM  
)
Dusk (5 PM - 8 PM  
)
Night (8 PM - 5 AM)  
Living Wallpapers have the following lighting transition time frames:  
Dawn from 5 AM-7 AM  
Daytime from 7 AM - 5 PM  
Dusk from 5 PM - 8 PM  
Night from 8 PM - 5 AM  
97  
Display Settings  
Display Themes  
Choose from 3 preset themes used for the menu display.  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
Settings & Tools and press  
.
Display Settings.  
3. Press  
Display Themes.  
4. Press the left soft key  
View to cycle through thumbnails of the  
themes.  
Cruiser  
Espresso  
List to return to the list.  
Rainbow  
Press the left soft key  
OK  
5. Make your selection and press  
SET to save.  
Dial Fonts  
1. From the main screen, press  
OK  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
Settings & Tools and press  
.
Display Settings.  
3. Press  
Dial Fonts.  
@
4. Press  
Style or  
Size.  
• Style: Choose Normal, Rainbow, Quill Pen, or Sticky.  
• Size: Choose Normal or Large Only.  
5. Use the navigation keys to select a dialing font preference, then press  
OK  
.
Changing Your Settings 98  
   
Menu Font Size  
1. From the main screen, press  
OK  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
Settings & Tools and press  
.
Display Settings.  
3. Press  
Menu Font Size.  
OK  
4. Select Normal or Large and press  
.
Clock Format  
This menu allows you to have time displayed in digital or analog format.  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
Settings & Tools and press  
.
Display Settings.  
3. Press  
Clock Format.  
@
4. Press  
Main Clock or  
Front Clock.  
5. The following options appear in the display. Highlight one of the following  
OK  
options and press  
to save.  
• Digital: Time appears in digital format, for example, 12:54pm.  
• Analog: Time appears in clock format. Digital format is still present in the  
display.  
• Off: No time is displayed.  
Phone Settings  
The Phone Settings menu provides the ability to access the following menus:  
Standalone Mode  
With Standalone Mode on, all RF functions for your phone are disabled, and you  
cannot use your phone to place or receive calls.  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
O
K
highlight  
2. Press  
3. Press  
Off and press  
Settings & Tools and press  
.
Phone Settings.  
@
Standalone Mode. Use the navigation key to select On or  
OK  
.
99  
         
Phone Settings  
Set Shortcut Key  
Shortcut Key allows you to select from up to 23 applications that appear in the  
display when you press the left/right/up/down directional keys on the navigation key  
from the main screen.  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
3. Press  
Settings & Tools and press  
.
Phone Settings.  
Set Shortcut Keys.  
4. Use the navigation key to select the directional key you want to change and  
OK  
press  
.
Note: Press  
Reset All to return to the navigation key defaults settings. For default settings see  
OK  
5. Select a menu item and press  
Voice Commands  
.
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
O
K
highlight  
2. Press  
3. Press  
Language  
Settings & Tools and press  
.
Phone Settings.  
Change the display language from English to Spanish or vice versa using the  
Language menu.  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
3. Press  
Settings & Tools and press  
.
Phone Settings.  
Language.  
OK  
4. Use the navigation key to select a language and press  
.
Changing Your Settings 100  
     
Location  
Note: This feature is only available on the Verizon Wireless network.  
The Location Global Positioning Service (GPS) setting identifies your location to the  
network. You can fully enable this setting or set GPS to work only in the case that  
you dial 911 from your phone.  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
O
K
highlight  
2. Press  
3. Press  
Settings & Tools and press  
.
Phone Settings.  
Location. The following options appear in the display:  
• Location On: GPS location setting is on wherever the feature is available.  
• E911 Only: GPS location setting is on whenever you dial 911 only.  
4. Use the navigation key to highlight an option.  
OK  
5. Press  
Security  
to select the highlighted setting.  
The Security menu allows you to lock your phone, set restrictions, and other  
security options.  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
3. Press  
Settings & Tools and press  
.
Phone Settings.  
Security.  
4. Enter the lock code (factory settings are the last four digits of your  
OK  
telephone number) and press  
display:  
. The following options appear in the  
• Edit Codes: Allows you to change the Lock Code for Phone Only Lock or Calls  
& Services.  
• Restrictions: Allows you to restrict the Location Setting (Lock/Unlock Setting),  
Calls (Outgoing or Incoming calls), messages (Outgoing or Incoming messages)  
and dial-up modems (Allow or Block).  
• Phone Lock Setting: Allows you to set the phone to Unlocked or lock the  
phone On Power Up.  
• Lock Phone Now: Allows you to lock the handset.  
• Restore Phone: All settings are reset to factory default settings and all user  
data is erased including pictures, videos, music, messages, contacts, and  
downloaded applications stored on the phone.  
101  
   
Phone Settings  
Lock Phone  
Lock Phone restricts the use of your phone with the exception of outgoing calls to  
911. Lock Phone allows you to answer calls, but to place calls (except to emergency  
numbers) you have to unlock the phone.  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
3. Press  
lock code is the last four digits of your telephone number.  
Settings & Tools and press  
.
Phone Settings.  
Security. You’re prompted to enter the lock code. The default  
OK  
4. Enter the Lock Code and press  
. Several security menus appear in the  
display.  
5. Press  
Phone Lock Setting. The following options display:  
• Unlocked: If locked, unlocks the device or phone, depending on your selection.  
• On Power Up: The Lock Code is required whenever you power up the phone.  
O
K
6. Use the navigation key to select an option and press  
Lock Phone Now  
1. From the main screen, press  
.
OK  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
3. Press  
lock code is the last four digits of your telephone number.  
Settings & Tools and press  
.
Phone Settings.  
Security. You’re prompted to enter the lock code. The default  
OK  
4. Enter the Lock Code and press  
. Several security menus appear in the  
display.  
5. Press  
Lock Phone Now.  
Your phone returns to the main screen. The Lock Code is required  
immediately to access any functions.  
Changing Your Settings 102  
     
Lock Location  
1. From the main screen, press  
OK  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
3. Press  
lock code is the last four digits of your telephone number.  
Settings & Tools and press  
.
Phone Settings.  
Security. You’re prompted to enter the lock code. The default  
OK  
4. Enter the Lock Code and press  
. Several security menus appear in the  
display.  
5. Press  
Restrictions.  
OK  
6. Enter the Lock Code then press  
. The default lock code is the last  
four digits of your telephone number.  
@
7. Press  
Location Setting.  
OK  
8. Highlight Lock Setting and press  
.
Edit Lock Code  
The default lock code is the last four digits of your phone number. Edit Code allows  
you to change this code to a lock code of your preference.  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
3. Press  
lock code is the last four digits of your telephone number.  
Settings & Tools and press  
.
Phone Settings.  
Security. You’re prompted to enter the lock code. The default  
OK  
4. Enter the Lock Code and press  
. Several security menus appear in the  
display.  
@
5. Press  
Edit Codes. The following options display:  
• Phone Only: Allows you to edit the lock code for only the handset.  
• Calls & Services: Allows you to edit the lock code for all Calls & Services.  
OK  
6. Highlight an option and press  
.
7. At the “ENTER NEW CODE” prompt, enter the new lock code and press  
OK  
.
8. You’re prompted to confirm the new lock code.  
9. At the “RE-ENTER NEW CODE” prompt, re-enter lock code and press  
OK  
.
103  
   
Phone Settings  
10. PHONE ONLY CODE SET” or CALLS & SERVICES CODE SET” message  
appears in the display confirming that your lock code was changed.  
Note: Your phone does not allow you to view the lock code for obvious security reasons. If you change the  
lock code, be sure to write down or memorize the new code.  
Restoring Your Phone Memory to Factory Condition  
Restore Phone, returns all setup options to their factory default.  
K
O
1. From the main screen, press  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
Settings & Tools and press  
.
Phone Settings.  
3. Press  
Security, and enter the lock code.  
4. Press  
Restore Phone. A prompt appears in the display asking if you  
wish to restore default settings and erase all user data including pictures,  
videos, music, messages, contacts, and downloaded applications stored  
on the phone.  
OK  
5. Highlight Yes and press  
return to the Security list.  
to restore default settings or select No to  
SEND  
Note: After the phone power cycles back on, you must press *228  
to re-program your phone  
number.  
Changing Your Settings 104  
Call Emergency Numbers in Lock Mode  
In Lock Mode, you can dial 911 to place an emergency call.  
Note: If you dial 911, your phone dials the emergency number immediately (no prompt).  
System Select  
The System Select menu allows you to set your roaming options. For more  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
O
K
highlight  
2. Press  
3. Press  
• Home Only  
Settings & Tools and press  
.
Phone Settings.  
System Select. The following options appear in the display:  
• Automatic, Automatic-A or Automatic-B (one of these 3 option will  
show)  
OK  
4. Make your selection and press  
NAM Select  
.
Your phone provides the option of selecting between two NAMs (Number Assignment  
Modules) or phone numbers. Select either NAM1 or NAM2.  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
O
K
highlight  
2. Press  
3. Press  
• NAM 1  
Settings & Tools and press  
.
Phone Settings.  
NAM Select. The following options appear in the display:  
• NAM 2  
OK  
4. Make your selection and press  
.
105  
 
Phone Settings  
Quick Search  
Quick Search is an easy way to locate contacts in your Address Book and Menu  
items.  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
Settings & Tools and press  
.
Phone Settings.  
3. Press  
Quick Search.  
4. Press the right soft key  
Info to display detail information about  
OK  
Quick Search. Press  
to return to Quick Search Menu.  
OK  
5. Select On or Off and press  
.
Searching for a Contact  
Note: Quick Search must be turn on to perform the procedures listed below.  
1. From the main screen, press the first three numeric keys that correspond  
to the letters of the contacts name.  
For example, to search for “Sally” you would enter  
S
A
L
2. Press the up navigation key to search for Contacts. If a match is found, the  
name(s) appear in the display.  
SEND  
3. Press the  
key to call the contact.  
Changing Your Settings 106  
Searching for a Menu Item  
1. From the main screen, press the first three numeric keys that correspond  
to the letters of the Menu item name.  
For example, to search for “Inbox” you would enter  
I
N
B
2. Press the down navigation key to search for Menu items. If a match is  
found, the menu item(s) appear in the display.  
OK  
3. Press the  
key to access the content of the menu item.  
Call Settings  
The Call Settings menu allows you to select the method for answering incoming  
calls, setting redial options, setting data options, voice privacy, and more.  
Answer Options  
The Answer Options menu allows you to select the method for answering incoming  
calls.  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
O
K
highlight  
2. Press  
3. Press  
Settings & Tools and press  
.
Call Settings.  
@
Answer Options. The following options appear in the display:  
• Flip Open: Calls are answered when the flip is opened.  
• Any Key: Calls are answered when any key is pressed.  
• Auto with Handsfree: Calls are answered automatically with a 5 second  
delay.  
4. Use the navigation key to highlight the method you wish to use for  
O
K
answering calls, then press  
5. Press the right soft key  
6. Press the left soft key  
MARK.  
Mark All to select all options.  
Done.  
107  
     
Call Settings  
Auto Retry  
Auto Retry automatically redials voice/data calls after a preset period of time.  
K
O
1. From the main screen, press  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
Settings & Tools and press  
.
Call Settings.  
3. Press  
Auto Retry. The following options appear in the display:  
• On  
• Off  
OK  
4. Use the navigation key to select an option and press  
.
TTY Mode  
Before you can use your phone with a TTY device, you’ll need to enable TTY  
One Touch Dial  
You can use this option to enable or disable the speed dialing feature.  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
OK  
highlight  
1. Press  
2. Press  
Voice Privacy  
Settings & Tools and press  
.
Call Settings.  
OK  
One Touch Dial. Select On or Off and press  
.
Note: This feature is only available on the Verizon Wireless network.  
Voice Privacy when enabled turns on advanced voice encryption. Voice privacy can  
be set to On or Off.  
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
Settings & Tools and press  
.
Call Settings.  
3. Press  
Voice Privacy. The following options appear in the display:  
• On  
• Off  
OK  
4. Use the navigation key to select an option and press  
.
Changing Your Settings 108  
       
Data Settings  
1. From the main screen, press  
OK  
MENU, use the right navigation key to  
OK  
highlight  
2. Press  
3. Press  
• Data Off: Phone operates in normal voice call mode.  
Settings & Tools and press  
.
Call Settings.  
Data Settings. The following options appear in the display:  
• Data For Next Call: Data call is enabled for next call only. Phone will reset to  
Data Off mode after call.  
• Data Until Powered Off: Phone will remain in Data Mode until phone is  
powered off.  
OK  
4. Use the navigation key to select an option and press  
DTMF Tones  
Use this menu to set DTMF settings to Normal, or Long.  
.
OK  
1. From the main screen, press  
MENU, use the right navigation key to  
O
K
highlight  
2. Press  
3. Press  
• Normal: Select for a normal tone.  
Settings & Tools and press  
.
Call Settings.  
DTMF Tones. The following options appear in the display:  
• Long: Select for an extended tone.  
OK  
4. Use the navigation key to select an option and press  
.
Memory  
The Memory menu allows you to manage your Save Options (for Pictures, Videos,  
and Sounds) on your Phone Memory or Card Memory. You can also set the  
memory usage for pictures, videos, music, sounds, and ringtones on your phone and  
microSD™ card.  
O
K
1. From the main screen, press  
highlight Settings & Tools and press  
2. Press Memory. The following options are available:  
MENU, use the right navigation key to  
OK  
.
• Save Options: You can set your Pictures, Videos, and Sounds to be saved to  
either phone memory or card memory.  
109  
 
Memory  
• Phone Memory: Allows you to see the memory usage for everything stored on  
your phone. The following options are available:  
-
Phone Memory Usage: Displays the current memory usage and allocation  
figures for the various applications and folders stored on the phone. These  
include: Available, Used, Total, My Pictures, My Videos, My Ringtones, My Music,  
My Sounds, Applications, and Pic/Video Msg.  
-
-
-
-
-
My Pictures: Pictures you have saved from a Picture message, downloaded  
via the “Get It Now” application, or taken using your phone.  
My Videos: Video Clips you have saved from a Video message, downloaded via  
the “Get It Now” application, or taken using your phone.  
My Ringtones: Ringtones you have downloaded via the “Get It Now”  
application.  
My Music: Music you have downloaded directly from the V CAST Music  
catalog or music you have transferred from your PC using Sync Music.  
My Sounds: Sounds you have downloaded, recorded using your phone, or  
saved from a Picture message with Sound attached.  
Note: Your phone does not come with a microSD™ memory card. A card must be purchased as an  
accessory. See your service provider for more information.  
• Card Memory: Allows you to see memory usage of everything stored on your  
microSD™ card. The following file options are available for the removable  
microSD™ memory card:  
-
Card Memory Usage: Displays the current memory usage and allocation  
figures for the various applications and folders stored on the card. These include:  
Available, Used, Total, My Pictures, My Videos, Ringtones, My Music, and  
My Sounds.  
-
-
-
-
My Pictures: Pictures you have saved from a Picture message or taken using  
your phone.  
My Videos: Video Clips you have saved from a Video message or taken using  
your phone.  
My Music: Music you have downloaded directly from the V CAST Music  
catalog or music you have transferred from your PC using Sync Music.  
My Sounds: Sounds you have recorded using your phone or saved from a  
Picture message with Sound attached.  
Changing Your Settings 110  
Phone Info  
The Phone Info menu allows you to view the software and hardware information,  
your assigned number, and an icon glossary for your phone.  
OK  
1. From the main screen, press  
highlight Settings & Tools and press  
2. Press  
3. Press  
numbers.  
4. Press  
MENU, use the right navigation key to  
O
K
.
Phone Info. My Number is highlighted.  
@
My Number to display the Mobile Device and Identification  
SW/HW Version to view the version of software, PRL, ERI,  
Browser, Get it Now, MSUI, Hardware, and MEID on your phone.  
5. Press  
description.  
K
Icon Glossary to view the list of icons with a brief  
O
6. Press  
to return to the Phone Info menu.  
111  
   
Get It Now  
Section 9: Get It Now  
Topics Covered  
Get It Now  
Music & Tones  
Picture & Video  
Games  
News & Info  
Tools on the Go  
Extras  
This section describes how to download and play music, tones, and video. It also  
outlines how to take, record and store images and videos, sounds, and ringtones  
using your phone.  
Get It Now  
The Get It Now menu provides sub-menus to Music & Tones, Picture & Video,  
Games, News & Info, Tools on the Go and Extras. You can also view memory info to  
see how much space you’ve used (and have left) for stored media. Use the following  
steps for each Get It Now sub-menu.  
1. From the main screen, press the navigation key right for  
Get It Now.  
2. Press the right soft key  
Info.  
@
3. Press  
App. Memory to display the memory available. Press the  
CLR  
key to return.  
Get It Now 112  
       
4. Press  
Content Memory to view the memory Available, Used, and  
CLR  
the Total amount being used. Press the  
key to return.  
5. Press  
View Log to see the file transfer activity.  
CLR  
6. Press the  
7. Press  
key to return.  
Help to display a list of frequently asked questions. Use the  
OK  
navigation key to highlight an item and press  
to display help text.  
CLR  
8. Press the  
key to return.  
Music & Tones  
This menu allows you to get new tunes and tones, record new sounds, and set tunes  
and tones as your ringtone. It also allows you to access your music files.  
V CAST Music  
You can use the V CAST Music option to download music from the V CAST Music  
catalog directly to phone memory or to a removable memory card. Before  
downloading music to your microSD™ memory card, be sure to format it as  
described below.  
Formatting a microSD™ Card using your Gleam  
K
O
1. From the main screen, press the  
MENU, use the navigation key to  
OK  
highlight  
2. Press  
3. Press  
Settings & Tools and press  
.
Memory.  
Card Memory.  
4. Press the right soft key  
5. The Format Card option is highlighted. Press  
Options.  
OK  
.
OK  
6. Highlight Yes and press  
to format microSD™ card.  
113  
   
Music & Tones  
Formatting a microSD™ Card using your PC  
For best playback of songs stored to the microSD™ memory card, you should  
reformat your memory card with PC format FAT32.  
Note: Any content currently stored on the microSD™ memory card will be lost after this procedure is  
performed.  
1. Insert the microSD™ memory card into an SD card adapter.  
2. Insert the SD card adapter into the SD card reader slot.  
3. Plug the SD card reader into a USB port on your PC.  
4. On your PC, go to your My Computer directory and highlight the drive that  
represents the SD card reader.  
5. Right click and select the Format option.  
6. Under the File System option, select FAT32 and click the Start button.  
7. Your microSD™ memory card will be reformatted.  
8. Remove the microSD™ card from the SD card reader and insert it back  
into your phone. The My Music directory will automatically be created on  
the microSD™ memory card the first time that you access V Cast Music/  
My Music/Sync Music from your phone.  
Downloading Music from the V CAST Music Catalog  
1. From the main screen, press the navigation key right for  
Get It Now.  
OK  
2. Highlight Music & Tones menu and press  
.
@
3. Press  
V CAST Music to open the V CAST Music catalog.  
4. Browse or search the catalog to preview the songs you want.  
OK  
5. Highlight the music (song or album) that you want to purchase. Press  
BUY to purchase.  
6. The CONFIRM PURCHASE screen will display the price and items you  
OK  
selected to purchase. Press  
BUY to accept the terms.  
7. You’ll receive confirmation that your purchase was successful and your  
OK  
music is available for download. Press  
to continue.  
8. Highlight Phone Memory or Memory Card for storage location (Memory  
OK  
Card is recommended). Press  
to begin downloading. Wait for the  
OK  
phone to acquire the content license. Press  
complete.  
when download is  
Get It Now 114  
     
9. Press the right soft key  
Play to play the downloaded song  
immediately.  
Or, You can press the left soft key  
Library to go to your Music  
Library of downloaded songs and albums.  
10. To return to the main screen, press the  
END  
key.  
Get New Ringtones  
You can use this option to download new ringtones from the Internet.  
1. From the main screen, press the navigation key right for  
Get It Now.  
OK  
2. The Music & Tones menu is highlighted, press  
.
3. Press  
Get New Ringtones.  
@
4. Press  
Get New Applications.  
5. You are connected to the Get It Now catalog and presented with available  
provider ringtone applications.  
6. To return to the main screen, press the  
My Ringtones  
1. From the main screen, press the navigation key right for  
END  
key.  
Get It Now.  
OK  
2. The Music & Tones menu is highlighted, press  
.
3. Press  
My Ringtones.  
Get New Ringtones to access the Get It Now catalog to  
@
4. Press  
download new ringtones. Or if you have already downloaded ringtones,  
OK  
highlight your selection and press  
.
5. To return to the main screen, press the  
END  
key.  
115  
Music & Tones  
My Music  
The Music Player can be used to play music files that you have downloaded from the  
V CAST Music catalog or that you have transferred from your PC using Sync Music.  
You can play your music with the flip open or closed.  
Playing Music with the Flip Closed  
The external keys which you will use are labeled below.  
Play/Pause  
Fast Forward  
Rewind  
Note: The touchpad keys (Rewind, Play and Fast Forward) are only active when the Sub-Display is active. If  
the Sub-Display is not active, press and hold one of the other external keys (Lock/Unlock Key, or  
Volume Key) to activate the Sub-Display.  
The touchpad responds to a light touch. Using excessive force when pressing the touchpad keys may  
damage the touchpad.  
1. From the main screen, with your flip closed, press and hold the Play/  
Pause (  
) key. If you have already downloaded music to your phone or  
memory card, all songs will begin to play one at a time.  
2. You can use the Fast Forward (  
another song track. Press and hold the Fast Forward (  
) keys to forward or rewind the current song.  
) and Rewind (  
) keys to skip to  
) and Rewind  
(
Get It Now 116  
   
Playing Music with the Flip Open  
1. From the main screen, press the navigation key right for  
Get It Now.  
OK  
2. The Music & Tones menu is highlighted, press  
3. Press My Music.  
.
4. The Music Library screen appears in the display. The following options  
appear in the display:  
• Genres: This option organizes your songs by music type (genre). For example,  
Folk, Rock, Country, Classical, Soul, Unknown and so on. Each folder will contain  
all songs within that genre.  
• Artists: This option organizes your songs by artist.  
• Albums: This option organizes your songs by album title. Even if you only have  
one song from an album, a folder for the album will display.  
• Songs: This option organizes your songs by song title. To add a song to a  
playlist, press the right soft key  
place the song into one of your playlists.  
Options and select Add to playlist to  
• Playlists: Any playlists that you have created are displayed in this option. Press  
the right soft key  
Create to create a new playlist. With a playlist  
highlighted, press the right soft key  
erase the playlist, or to create a new playlist.  
Options to play, edit, rename, or  
• Inbox: This repository is where alert notifications are received when new music  
from a selected artist is available for download.  
• Play All: This option will play all of your songs in list order.  
• Shuffle: This option will re-sort a playlist order.  
5. While in the Music Library, press the left soft key  
Catalog to go  
to the V CAST Music catalog.  
CLR  
Press  
to go back to the Music Library.  
OK  
6. Use the navigation key to select Songs and press  
or press  
Options, to  
Songs  
7. Scroll down to a song and press the right soft key  
select from the following options:  
• Add to playlist: Add song to playlist.  
• Move song: Moves the song from the microSD™ card to the phone and from  
the phone to the microSD™ card.  
• Erase song: Erases the selected file.  
• Song Info: Displays Title, Artist, Album, Genre, Copyright, Length, and Size.  
• Reinitialize library database: refreshes library database.  
8. Press the up/down navigation keys to highlight the song you want to listen  
OK  
to and press  
PLAY to play the song.  
117  
   
Music & Tones  
9. During song playback, press the right soft key  
Options to switch  
to one of the following functions:  
Note: The song playing will automatically stop playing when this is done. To resume playing of the song,  
CLR  
press  
.
• Play All: Selects all songs for playback.  
• Shuffle: Re-sorts the current playlist order.  
• Get V CAST Music: Connects you to the V CAST Music catalog to download  
more songs.  
• Buy music by (Artist Name): Allows you to buy music of the artist currently  
playing.  
10. During song playback, press the right navigation key to advance to the next  
song track in the current playlist, or press the left navigation key to skip to  
the previous song track.  
Creating a Playlist  
1. From the main screen, press the navigation key right for  
Get It Now.  
OK  
2. The Music & Tones menu is highlighted, press  
.
3. Press  
My Music.  
4. Press  
Playlists.  
5. Press the right soft key  
Create.  
OK  
6. Enter a title for the playlist in the text box and press  
.
CLR  
7. Press the  
key to return to the Music Library menu. You can select  
songs to add to the playlist by browsing through Genres, Artists, Albums, or  
Songs in the Manage Music library.  
8. Highlight a song, press the right soft key  
Options and press  
@
OK  
Add to playlist. Highlight the appropriate playlist and press  
Add.  
9. To return to the main screen, press the  
END  
key.  
Get It Now 118  
 
Editing a Playlist  
1. From the main screen, press the navigation key right for  
Get It Now.  
OK  
2. The Music & Tones menu is highlighted, press  
.
3. Press  
My Music.  
4. Press  
Playlists.  
5. Highlight the playlist you would like to edit and press the right soft key  
OK  
Options. Highlight  
6. To remove a song from the playlist, highlight the song and press the right  
soft key Remove.  
7. To change the order of the songs in your playlist, highlight a song and  
Edit playlist and press  
.
OK  
press  
Move. Then use the Up or Down navigation keys to move the  
OK  
song up or down in the playlist order. When you are finished, press  
Save.  
8. To return to the main screen, press the  
My Sounds  
1. From the main screen, press the navigation key right for  
END  
key.  
Get It Now.  
O
K
2. The Music & Tones menu is highlighted, press  
3. Press My Sounds.  
K
.
O
4. Record New is highlighted. Press  
to launch the RECORD NEW  
screen.  
O
K
5. Press  
REC to begin recording.  
K
O
6. During the recording, press  
STOP to stop and automatically save the  
recording to My Sounds or press the left soft key  
and resume the recording appropriately.  
Pause to pause  
OK  
7. Press  
STOP to save sound.  
119  
 
Music & Tones  
Sync Music  
This option allows you to transfer music files from your PC. In order to use this  
option, you must load Windows MediaTM Player 10 or higher on your PC. Windows  
MediaTM Player 10 or higher is only compatible with Windows XP® operating  
systems.  
For setup of Windows MediaTM Player 10, refer to the following resources:  
To download the Windows MediaTM Player 10:  
http://www.microsoft.com/windows/windowsmedia/mp10/default.aspx  
Tips on getting started:  
http://www.microsoft.com/windows/windowsmedia/mp10/usingplayer.aspx  
Common questions:  
http://www.microsoft.com/windows/windowsmedia/mp10/troubleshooting.aspx  
Support:  
http://www.microsoft.com/windows/windowsmedia/mp10/errors.aspx  
Note: The file name is limited to 36.3 characters (thirty-six to left of “.”, three to right of “.”)  
Only songs with English or Spanish filenames can be successfully transferred to the phone for play  
back.  
Note: Before transferring files, be sure to format your microSDTM memory card with PC format FAT32. For  
more information, refer to "Formatting a microSD™ Card using your PC" on page 114.  
1. Plug in the USB cable (purchased separately) to your phone and connect it  
to a USB port on your PC.  
2. From the main screen, press the navigation key right for  
Get It Now.  
OK  
3. The Music & Tones menu is highlighted, press  
4. Press Sync Music.  
5. Your phone should display the message, Connected.  
.
6. Open Windows Media Player 10 on your PC and select the SYNC option.  
7. The left-hand side of the Windows Media Player will display the files on  
your PC. Check the songs you want to download.  
8. On the right-hand side of the Windows Media Player, select whether you  
want to download the music to Removable storage card or Phone  
internal memory.  
9. Press the Start Sync button on the upper left-hand side of the Windows  
Media Player.  
Get It Now 120  
   
10. A Synchronization Complete message will appear on the phone when  
downloading is complete.  
11. Disconnect the USB cable (purchased seperately).  
12. To return to the main screen, press the  
END  
key.  
Picture & Video  
This menu allows you to get new Pictures and Videos via Get It Now and V CAST  
Video or take new Pictures or Videos using your phone’s camera/camcorder. You can  
also view the saved pictures.  
V CAST Video  
V CAST, the next generation wireless technology that unveils a whole new  
multimedia experience at your fingertips, provides access to vibrant, full-color  
content from some of the biggest names in entertainment. V CAST is your link to  
video on demand, which allows you to view or download video clips that contain  
breaking news, sports highlights, weather and more.  
For additional information regarding V CAST Videos and its use, see  
www.verizonwireless.com.  
Note: To access and download videos, you must have the  
icon displayed.  
Browsing, Selecting and Playing Video Clips  
1. From the main screen, press the navigation key right for  
Get It Now.  
2. Press  
3. The V CAST Videos option is highlighted. Press  
4. Use the navigation keys to highlight the V CAST Videos category you want.  
Picture & Video.  
OK  
.
OK  
5. After choosing the category you want press  
. Choose a sub category,  
if applicable, by using the navigation keys or by entering the short-cut key  
OK  
number and press  
.
6. Use the navigation key to highlight a video. You may press the right soft  
key  
Options to read the description of the video clip.  
K
O
7. To view the highlighted video, press  
VIEW.  
OK  
8. Highlight Yes to accept charges, if applicable, and then press  
. After  
connection and buffering occurs, the video clip begins.  
121  
         
Picture & Video  
Downloading a Video Clip  
1. Launch V CAST Videos and select a video you want to save. For  
information about launching your video player and choosing a video clip,  
review steps 1-5 of the previous section, “Browsing, Selecting and Playing  
Video Clips” above.  
OK  
2. To download and save the highlighted video, press  
SAVE. The video  
clip will be saved to My Video.  
OK  
3. Highlight Yes to accept charges, if applicable, and then press  
. The  
video download begins.  
4. Once the download is completed, “Download Complete. Play video  
now?” appears in the display.  
K
O
5. Select Yes and press  
V CAST Videos menu.  
to view the video, or select No to return to the  
Note: Not all video content available can be downloaded to your phone; however, all content is available for  
viewing.  
Deleting Video Clips  
1. From the main screen, press the navigation key right for  
Get It Now.  
2. Press  
Picture & Video.  
3. Press  
My Videos.  
4. Use the navigation key to highlight the video you want to erase and press  
the left soft key Erase.  
K
O
5. Highlight Yes when the confirmation screen displays, then press  
.
Configure Alerts for New Video Clips  
1. Launch V CAST Videos.  
2. Use the navigation keys (left, right, up, or down) to select the  
V CAST Videos categories you want to configure an alert.  
3. Choose a sub category if applicable, then press the right soft key  
Options.  
OK  
4. Highlight Alerts and press  
5. Highlight Configure alerts and press  
6. Select the alert content you want, and press  
7. After reading terms, highlight Save to accept and press  
.
OK  
.
OK  
.
OK  
, or highlight  
OK  
Cancel to decline and press  
.
Get It Now 122  
     
Note: Fees apply for text messages/alerts both sent and received.  
Get New Pictures  
1. From the main screen, press the navigation key right for  
Get It Now.  
2. Press  
3. Press  
4. Press  
Picture & Video.  
Get New Pictures.  
@
Get New Applications. Follow the on-screen prompts to  
download pictures and wallpaper from the Get It Now server. Appropriate  
subscription charges may apply.  
My Pictures  
My Pictures allows you to review the pictures taken with the camera feature or  
downloaded and stored into your phone and/or microSDTM card  
1. From the main screen, press the navigation key right for  
Get It Now.  
2. Press  
Picture & Video.  
3. Press  
My Pictures.  
O
K
VIEW to view  
Options to select  
4. Use the navigation key to highlight a photo, and press  
the highlighted picture. Press the right soft key  
from the following options (depending on whether you choose to highlight  
or highlight and view a photo):  
• Send: Launches the send submenu. Select one of the following:  
-
-
-
Picture Message: Allows you to send the image in a Picture Message.  
To PIX Place: Sends picture to PIX Place.  
Via Bluetooth: Allows you to send the image via bluetooth to a device capable of  
receiving the image.  
• Set As: Set the picture as the Main Wallpaper, Front Wallpaper or Picture ID.  
• Take Picture: Activates the camera.  
• Get New Pictures: Allows you to download pictures and wallpaper from the  
Get It Now server.  
• Slide Show: Allows you to view in a series of pictures.  
• Print: Allows you to print the image using a USB cable connection or to a paired  
bluetooth printer.  
123  
 
Picture & Video  
• Rotate: Allows you to rotate the picture. Once you have completed editing your  
OK  
picture press  
existing image.  
. You can now save the image as a Copy or Overwrite the  
Flips Image Up/Down  
Rotate Right 90  
rotates image  
a
full 360  
Flips Image Left/Right  
• Create Postcard: Allows you to merge a sketched picture with a regular  
picture to create a postcard.  
• Rename: Renames picture file name.  
• Move: Moves picture from phone to memory card or memory card to phone.  
• Lock/Unlock: Locks or unlocks the entry to prevent accidental deletion.  
• Erase Files: Erases pictures from the gallery except the locked images.  
• File Info: Provides the date, time, resolution, size and rights to the selected  
picture.  
OK  
5. Use the navigation key to make your selection and press  
.
Printing a Picture from your phone  
The Gleam comes equipped with a built-in camera that allows you to print images  
directly to a printer using the PictBridge technology. A USB cable must be connected  
between the two devices before any printing can occur.  
Note: Using PictBridge to print photos automatically places your phone in Standalone Mode. This means  
you cannot receive or make calls other than emergency (911) calls until PictBridge is finished.  
1. From the main screen, press the navigation key right for  
Get It Now.  
2. Press  
Picture & Video.  
3. Press  
My Pictures.  
4. Select a photo.  
5. Press the right soft key  
Options.  
6. Press  
Print.  
@
7. Press  
USB or press  
Bluetooth.  
Get It Now 124  
If wanting to print via USB  
@
OK  
1. Press  
USB and press  
. “STANDALONE MODE ENABLED TO  
PRINT” appears in the display.  
O
K
2. Select a photo and press  
MARK to place a check mark next to the  
Done or press the right  
Mark All. “CONNECT A USB CABLE” appears in the  
image selected. Press the left soft key  
soft key  
display.  
3. Insert the USB cable into your phone. The PRINT SETTINGS screen  
appears in the display.  
4. Highlight Copies and press the navigation key left or right to select the  
desired number of copies to print.  
5. Press the navigation key down to select Type. Press the navigation key left  
or right to select one of the following sizes:  
• Default  
• 1-Up  
• 1-Up Borderless  
• 2-Up  
• 4-Up  
• Index  
Note: These sizes may vary and are dependent on the printer’s capabilities.  
6. Press the navigation key down to select Paper Size. Press the navigation  
key left or right to select Default or whatever paper sizes are supported by  
the printer.  
Note: Paper sizes may vary and are dependent on the printer’s capabilities.  
125  
Picture & Video  
7. Press the navigation key down to select Quality. Press the navigation key  
left or right to select Default or one of the quality options supported by the  
printer.  
Note: Quality options may vary and are dependent on the printer’s capabilities.  
8. Press the navigation key down to select Date. Press the navigation key left  
or right to turn on or off.  
K
O
9. Press  
PRINT to print the marked image(s).  
K
O
10. Select Yes to confirm printing and press  
.
If wanting to print via Bluetooth  
1. Press  
Bluetooth.  
@
2. Press  
Add New Device. The “TURN BLUETOOTH POWER ON?”  
popup displays.  
OK  
3. Yes is highlight, press  
to activate Bluetooth on your device.  
4. Make sure the device your are connecting to is in discoverable mode and  
OK  
press  
.
Get It Now 126  
5. Your device begans to search for other bluetooth enabled device(s).  
OK  
6. Select the device you want to pair with and press  
K
PAIR.  
O
7. Enter the passkey and press  
.
8. Once connected the BEFORE CONNECTING SCREEN displays select  
O
K
Always ask or Always connect and press  
K
.
O
9. Highlight Yes and press  
to connect to the printer.  
10. Transfer Completed” appears in the display and the chosen picture  
prints.  
Note: Print setting options may be available, dependent on the printer’s capabilities.  
My Videos  
My Videos allows you to review videos taken with the camcorder feature or  
downloaded and stored into your phone and/or microSDTM card. Video clips you save  
are stored in My Videos. You can access video clips without launching the  
V CAST Videos application and delete your saved video clips directly.  
1. From the main screen, press the navigation key right for  
Get It Now.  
2. Press  
Picture & Video.  
3. Press  
My Videos.  
OK  
4. Use the navigation key to select a video, and press  
PLAY to play the  
highlighted video.  
5. Press the left soft key  
Erase to erase the selected video.  
127  
Picture & Video  
6. Press the right soft key  
Options to select from the following  
options:  
• Send: Launches the send submenu. Select one of the following:  
-
Video Message: Allows you to send the video in a Video Message.  
-
To PIX Place: Sends videos to PIX Place.  
• Record Video: Activates the camcorder.  
• V Cast Videos: Launches the internet to get online videos.  
• Set As Wallpaper: Sets the selected user generated video as wallpaper for the  
main display.  
• Rename: Allows you to rename user generated videos.  
• Move: Allows you to move user generated video from phone to memory card or  
memory card to phone.  
• Lock/Unlock: Locks/Unlocks the user generated videos to prevent accidental  
deletion.  
• Erase Files: Erases videos from the gallery except locked videos.  
• File Info: Provides the name, date, time, resolution, duration and size of the  
selected video.  
OK  
7. Use the navigation key to make your selection and press  
.
Take Pictures  
This menu launches the camera.  
1. From the main screen, press the  
Camera/Camcorder key  
Camera/Camcorder  
on the left side of the phone.  
key  
Tip: Alternatively to launch the camera, press the Camera/Camcorder key (  
).  
If you would like to switch to the camcorder, press and hold the Camera/Camcorder key (  
launch camcorder.  
) to  
Get It Now 128  
 
2. Press the left soft key  
your phone.  
MyPics to view images already saved to  
Press the right soft key  
Options, to choose the specific camera  
settings. Press the navigation key up or down to advance to each setting  
category, and to make selections within each category. The following  
categories are available:  
• Settings: Allows you to customize your image settings.  
-
-
-
Color Effect: Allows you to set this option from the following choices:  
Normal, Black & White, Sketch, Antique, Negative  
White Balance: Allows you to set this option from the following choices: Auto,  
Sunny, Cloudy, Tungsten, or Fluorescent.  
Memory: Allows you to select the location for saved pictures. Save to phone or  
microSD™ card.  
-
-
-
-
-
Auto Name: Turn Auto Name Off or On  
Preview Mode: Allows you preview the image in Full screen or Actual screen.  
ISO: Auto, 100, 200, or 400.  
Metering: Average, Center, Spot  
Icon Display: Allows you to hide or view the camera icons in the display.  
Select Display All, Partial, Guideline, No Icons.  
-
Sound Effect: Allows you to select the Ready Sound and/or Shutter  
Sound.  
-Ready Sound: The sound you hear before you capture the image. Off, Say  
Cheese!, Look here, 1,2,3,!  
-Shutter Sound: Allows you to select a shutter sound. Off, Shutter, OK,  
Melody.  
-
Reset Settings: Return camera options to default settings.  
Nightshot: Allows you to turn Nightshot Off or On.  
• Self Timer: Off, 3 Seconds, 5 Seconds, 10 Seconds  
• Quality: Economy, Normal, Fine  
129  
Picture & Video  
• Resolution: (1600x1200) (1280x960), (1024x768), (640x480), (320x240), and  
(176x144).  
• Multi-Shot: Series Shot, and Divided Shot.  
• Camcorder: Switches from Camera to Camcorder  
OK  
3. Press  
TAKE to capture a picture. Press the right soft key  
Erase to delete it or press the left soft key  
Save. The picture is  
now saved to the gallery.  
4. To exit the camera, press the  
END  
key.  
Taking a Picture with the flip closed  
1. From the main screen, press and  
hold the Camera/Camcorder key  
Camera/Camcorder  
on the left side of the  
key  
phone.  
2. Take Picture is highlighted, press  
the Rewind (  
) to highlight Take Picture if not already highlighted.  
3. Press Play/Pause (  
) OK to select.  
4. Press the Play/Pause (  
5. The picture is automatically saved to My Pics.  
Record Video  
) OK to capture a picture.  
This menu launches the camcorder.  
1. From the main screen, press and  
hold the Camera/Camcorder key  
on the left side of the  
Camera/Camcorder  
key  
phone. The camcorder is now  
active.  
Tip: Alternatively to launch the camera, press the Camera/Camcorder key (  
).  
If you would like to switch to the camcorder, press and hold the Camera/Camcorder key (  
launch camcorder.  
) to  
Get It Now 130  
   
2. Press the left soft key  
downloaded videos.  
Videos to preview previously recorded or  
Press the right soft key  
Options to choose the specific video  
settings. Press the navigation key up or down to advance to each setting  
category, and to make selections within each category. The following  
categories are available:  
Settings: Allows you to customize your video settings.  
-
Color Effect: Normal, Black and White, Antique and Negative.  
-
-
White Balance: Auto, Sunny, Cloudy, Tungsten, or Fluorescent.  
Memory: Allows you to select the location for saved videos. Save to phone or  
microSD™ card.  
-
Auto Name: Allows you to set Auto Name to On or Off. The file is saved and file  
name is selected automatically.  
-
-
Icon Display: Allows you to hide or view the camcorder icons in the display  
when recording a video. Display All, Partial, No Icons.  
Sound Effect: Allows you to select the Start Sound and/or End Sound  
-Start Sound: Set the start sound you will hear when you capture a video.  
Off, Beep, Look Here!, 1,2,3!  
-End Sound: Set the end sound you will hear when you finished  
capturing a video. Off, OK, Beep-beep-beep, Melody  
-
Reset Settings: Return camcorder options to default settings.  
• Recording Mode: Limit for Video Msg (up to 30 seconds), Normal (up to 10  
minutes)  
• Self Timer: Off, 3 Seconds, 5 Seconds, 10 Seconds  
• Quality: Economy, Normal, Fine  
• Resolution: (320X240), (176X144 Video Msg)  
• Camera: Switches from Camcorder to Camera  
OK  
3. Press  
to save the settings.  
131  
Picture & Video  
OK  
4. Press  
REC to begin recording. Press the left soft key  
Pause  
-or-  
OK  
STOP.  
5. Press the left soft key  
Save or the right soft key  
key.  
Erase.  
6. To exit the camcorder, press the  
END  
Note: If you receive an incoming call while using your camcorder, the video recording is stopped. You will  
be presented with the call Ignore / Accept screen. If you ignore the call, then you are given the choice  
to Save, Play or Erase the video. If you accept the call, then your video is auto-saved and the  
camcorder application exits in the background.  
Note: If the battery level becomes too low while you are recording, the recording is stopped and the video is  
auto-saved. The low battery indicator will be displayed and you will exit from the camcorder  
application. If your battery is too low then the phone will power down without saving the video.  
Note: If you receive a text message, a multi-media message or a voicemail while you are recording, the  
video recording is stopped. You are given the choice to View Now or View Later. If you choose later,  
you are given the chance to Save, Play or Erase the video. If you want to view the message now, the  
video is auto-saved and the camera application exits in the background.  
Recording a Video with the flip closed  
1. From the main screen, press and  
hold the Camera/Camcorder key  
Camera/Camcorder  
on the left side of the  
key  
phone.  
2. Take Picture is highlighted, press  
the Fast Forward key (  
3. Press Play/Pause (  
) to highlight Rec. Video.  
) OK to select.  
4. Press the Play/Pause (  
5. Press the Play/Pause (  
) REC to record video.  
) STOP to stop and save recording.  
6. The video is automatically saved to Videos.  
Get It Now 132  
PIX Place  
Sends pictures to your online album.  
Note: You must first setup your account on the Verizon Wireless website: www.verizonwireless.com before  
establishing a connection.  
1. From the main screen, press the navigation key right for  
Get It Now.  
2. Press  
Picture & Video.  
PIX Place. The PIX Place sign-on screen displays.  
3. Press  
4. Enter your Mobile Number and Password. Use the navigation key to  
OK  
highlight LOGIN and press  
. You are now connected to your online  
album.  
Games  
Select from several fun and interesting applications or a broad category of games  
that you can play on your phone.  
1. From the main screen, press the navigation key right for  
Get It Now.  
2. Press  
Games.  
@
3. Press  
Get New Applications.  
OK  
4. Use the navigation keys to make a selection and press  
.
OK  
5. Choose the charge Either Subscription or Unlimited, then press  
.
Follow in screen prompts to apply.  
133  
 
News & Info  
News & Info  
1. From the main screen, press the navigation key right for  
Get It Now.  
Tip: Alternatively to launch the Verizon Wireless Mobile Web, press the Up arrow navigation key.  
2. Press  
News & Info.  
3. The browser is launched and a pop up screen with available applications is  
displayed.  
4. Use the navigation key to browse the categories.  
OK  
5. Once the desired category is highlighted, press  
to enter the category  
list.  
When you use Get News & Info, some of the keys operate differently than during a  
normal phone call.  
It presents on-screen items in any of the following ways:  
Text or numeric input  
Links (embedded in content)  
Numbered options (some options may not be numbered)  
Simple text  
You can utilize the options or links by using the soft keys.  
Get It Now 134  
   
Tools on the Go  
Download applications that keep you in touch with the world, keep you organized,  
and help you find the coolest spots.  
1. From the main screen, press the navigation key right for  
2. Press Tools on the Go.  
3. Get New Applications is highlighted. Press  
4. Highlight the application you wish to download and press  
Get It Now.  
OK  
.
OK  
.
OK  
5. Follow on screen subscription prompts and press  
. The download  
process begins.  
6. At the “App installed successfully. Would you like to run it?” prompt, press  
Yes to launch application, or No to return to category list.  
Note: The Tools on the Go menu will display all downloaded applications, with the most current download  
first.  
Extras  
1. From the main screen, press the navigation key right for  
2. Press Extras.  
3. Get New Applications is highlighted.  
Get It Now.  
OK  
4. Press  
.
OK  
5. Highlight the application you wish to download and press  
.
OK  
6. Follow on screen subscription prompts and press  
. The download  
process begins.  
7. At the “App installed successfully. Would you like to run it?” prompt, press  
Yes to launch application, or No to return to category list.  
135  
   
Voice Commands  
Section 10: Tools  
Topics Covered  
Voice Commands  
Calculator  
Calendar  
Alarm Clock  
World Clock  
Stop Watch  
Notepad  
The topics covered in this section allow you to schedule appointments, view the  
calendar, set an alarm, view time zones, take notes, and perform simple math  
calculations  
Voice Commands  
Calculator  
You can perform calculations, including addition, subtraction, multiplication and  
division using your phone.  
Normal  
OK  
1. From the main screen, press  
MENU, then press the right navigation  
O
K
key to  
Settings & Tools and press  
Tools, Calculator,  
.
@
2. Press  
Normal. The Calculator  
opens.  
3. Enter the first number in your equation using the keypad. (Numbers can be  
up to eight digits long.)  
4. Press the right soft key  
Operator to display a pop-up menu  
which allows you to enter a Parenthesis or Power if desired. Press the left  
CLR  
soft key  
Clear or  
to clear all data entered.  
#
5. Press  
6. Press  
to change the sign for a number to a negative.  
to add a decimal point.  
Tools 136  
         
7. Use the navigation directional keys to set the type of calculation that you  
wish to perform. Your choices are as follows:  
• Up key: [+] Addition  
• Down key: [-] Subtraction  
• Right key: [x] Multiplication  
• Left key: [÷] Division  
8. Use the keypad to enter the second number into your equation.  
OK  
9. Press  
(=) to perform the calculation and view the result.  
Tip  
Calculates the tip and determine how much each person should pay for the meal.  
OK  
1. From the main screen, press  
MENU, then press the right navigation  
OK  
key to  
Settings & Tools and press  
Tools, Calculator,  
.
2. Press  
Tip. The Tip Calculator  
opens.  
3. Populate the following fields:  
• Bill: enter the amount of the bill.  
• Tip: enter the tip percentage.  
• # Paying: enter the amount of people paying.  
Note: Press the  
key to enter a decimal point.  
4. In the section below, the calculator will automatically display the Tip, total  
bill including the tip, and the share of the bill for each person.  
Converter  
The Converter menu provides the following conversion categories:  
Temperature  
Length  
Weight  
Area  
Volume  
Currency  
137  
   
Calendar  
OK  
1. From the main screen, press  
MENU, then press the right navigation  
OK  
key to  
Settings & Tools and press  
Tools, Calculator,  
.
2. Press  
Converter.  
OK  
3. Scroll to the conversion feature you wish to use and press the  
key.  
4. Use the Left or Right navigation keys to select the From units of money or  
measure for the quantity you want converted.  
5. Enter the quantity you want converted in the text box.  
#
Note: Press the  
key to enter a decimal point. Press  
to change the sign for a number to a  
negative.  
Use the left or right navigation keys to select the To units of money or measure for  
the quantity you want converted.  
Calendar  
Schedule up to eight events for any day by indicating each event’s start and end  
time. Set alarms for events so that you can be alerted before an event takes place.  
Events scheduled for future dates automatically appear on your Today events  
schedule for the present day.  
Add a new event  
OK  
1. From the main screen, press  
MENU, then press the right navigation  
OK  
key to  
Settings & Tools and press  
.
2. Press  
Tools, Calendar. The calendar appears in the  
display with the current date highlighted.  
3. To view available options, press the right soft key  
Options. A  
pop-up menu appears in the display that contains the menu items.  
• Weekly: View the current week.  
• Go To Date: Go to any date that you specify.  
• Go to Today: View today’s events.  
• Erase Old: Select a past event to delete.  
• Erase All: Delete all events in your calendar  
4. Press the left soft key  
Add to add a new event.  
5. The Appointment name field is highlighted. Enter the name and use the  
down navigation key to move to the following fields:  
• Start Date: Enter the start date for the event.  
• Start Time: Enter the start time for the event.  
Tools 138  
     
-
am/pm: Select from am or pm for the start time.  
• End Date: Enter the end date for the event.  
• End Time: Enter the end time for the event.  
-
am/pm: Select from am or pm for the end time.  
• Recurrence: Select the frequency of the event.  
• Alert: Sets the alarm for the event. Select from Tone, Vibrate, or Light Only.  
• Reminder: Set a reminder before the event. Select Off, Once, Every 2 Minutes,  
Every 15 Minutes.  
• Alert Time: Set the Alert Time to sound before the event takes place.  
6. Fill in and select event details using the navigation keys and the  
alphanumeric keypad.  
O
K
7. Press  
View an event  
1. From the main screen, press  
. The event is saved.  
OK  
MENU, then press the right navigation  
OK  
key to  
Settings & Tools and press  
.
2. Press  
Tools,  
Calendar.  
3. A calendar appears in the display with the current date highlighted.  
4. Use the navigation keys to highlight the date containing the event that you  
wish to view or press the right soft key  
Options.  
In the pop-up menu that appears in the display, use the navigation key to  
OK  
highlight Go To Date, then press  
.
OK  
Enter the desired date in the box, then press  
. The month that you  
entered appears in the display with the event date highlighted.  
OK  
5. Press  
VIEW to view event details for the date.  
OK  
6. To edit the event, press  
VIEW, press the left soft key  
Edit.  
OK  
Make changes, then press  
SAVE.  
7. Press the right soft key  
Options. A pop-up menu appears in the  
display.  
8. To erase the current event, press  
Erase. A pop-up menu appears  
OK  
with Yes highlighted. press  
to erase, or highlight No to cancel.  
@
9. To see the selected date in a month view, press  
Monthly.  
10. To see the selected date in a week view, press  
Weekly.  
139  
   
Alarm Clock  
Alarm Clock  
Your phone has an alarm clock that can be set to go off once, or recur daily at a  
specific time. Once set, the alarm clock is easy to change or turn off.  
Set An Alarm  
OK  
1. From the main screen, press  
MENU, then press the right navigation  
OK  
key to  
Settings & Tools and press  
.
2. Press  
Tools, Alarm Clock. The Alarm Clock menu  
displays with the Alarm 1 highlighted.  
3. The following options appear in the display:  
• Alarm 1  
• Alarm 2  
• Alarm 3  
4. Use the navigation key to highlight the alarm that you wish to enable, then  
OK  
press  
. The Set Alarm (1, 2, or 3 depending on your selection) screen  
appears in the display.  
5. The Alarm field is highlighted. Use the left/right navigation keys to select  
On or Off.  
6. Press the down navigation key to highlight the Time field, then enter the  
time that you wish for the alarm to sound.  
7. Press the down navigation key once to highlight the am/pm field. Use the  
left/right navigation keys to select am or pm.  
8. Press the down navigation key once to highlight the Frequency field. Use  
the left/right navigation keys to set the frequency (occurrence) of the  
alarm. Below lists and defines the options for this field.  
• Once: The alarm sounds only once, at the time specified.  
• Daily: The alarm sounds every day at the time specified.  
• Mon-Fri: The alarm sounds Monday through Friday at the time specified.  
• Weekends: The alarm sounds Saturday through Sunday at the time specified.  
9. Press the down navigation key once to highlight the first Ringer field. Use  
the left/right navigation keys to set the ringer to Tone, Vibrate, or Light  
Only.  
10. If you selected Tone, press the down navigation key again to highlight the  
second field. Use the left/right navigation keys to set the alert tone to VZW  
Default Tone, or select a tone from My Ringtones.  
Tools 140  
       
OK  
11. When all fields have correct information entered, press  
SAVE to save  
your settings.  
Disable an alarm before it sounds  
OK  
1. From the main screen, press  
MENU, then press the right navigation  
OK  
key to  
Settings & Tools and press  
.
2. Press  
Tools, Alarm Clock. The Alarm Clock menu  
displays with the Alarm 1 highlighted.  
3. Use the navigation keys to highlight the alarm you wish to disable, then  
press the right soft key  
Options. A pop-up menu appears in the  
display.  
@
4. Press  
Off to turn the highlighted alarm off. Press  
Reset to  
reset the highlighted alarm or press  
alarms.  
Reset All to reset all of the  
Snooze  
When an alarm sounds, a menu screen displays that allows you to either turn the  
alarm off or to have the alarm ring again after 5 minutes. This is called Snooze.  
To use this feature follow these steps:  
1. Set one of your phone’s 3 alarms. For more information, refer to "Set An  
2. When an alarm sounds, use the up/down navigation key to highlight  
OK  
Snooze or Dismiss. To snooze, highlight Snooze and press  
to set it  
to ring again after 5 minutes. Or, highlight Dismiss to turn the alarm off  
completely. The alarm turns off and the main screen displays.  
Stop Watch  
OK  
This feature allows you to use a stopwatch. Press the  
START to start the  
OK  
stopwatch. Press  
STOP to stop stopwatch. Press the right soft key  
Reset to erase recorded stopwatch time.  
OK  
1. From the main screen, press  
MENU, then press the right navigation  
OK  
key to  
Settings & Tools and press  
.
2. Press  
Tools, Stop Watch. The Stop Watch appears in the  
display.  
OK  
3. Press the  
START to start the stopwatch.  
OK  
4. Press  
STOP to stop stopwatch.  
141  
           
World Clock  
5. Press the right soft key  
Reset to erase recorded stopwatch time.  
6. Press the left soft key  
Record to record split times.  
World Clock  
World Clock allows you to view the time of day or night in any part of the world.  
OK  
1. From the main screen, press  
MENU, then press the right navigation  
OK  
key to  
Settings & Tools and press  
.
2. Press  
Tools, World Clock.  
3. Use the left soft key  
Cities to display the 45 supported cities.  
OK  
Press  
to save your entry.  
4. Press the right soft key  
Options to view the following options:  
• Set As Local Time: Sets the time according to the city chosen in the Cities field.  
• DST On: Sets the Daylight Savings time option.  
5. You can scroll through other cities by pressing the navigation keys.  
6. To return to the main screen, press  
END  
.
Notepad  
Create and store notes in Notepad. Return to Notepad anytime to review and edit  
your notes.  
OK  
1. From the main screen, press  
MENU, then press the right navigation  
OK  
key to  
Settings & Tools and press  
Tools, Notepad.  
.
2. Press  
3. If you have any stored notes, they appear as a list in the display. If this is  
your first time in Notepad, No Notes displays.  
4. To add a new note, press the left soft key  
Add, then enter the  
note using the keypad.  
5. While entering a note, press the left soft key  
Abc, to display a  
pop-up menu with the following text entry modes  
• Word  
• Abc  
• ABC  
• 123  
• Symbols  
Tools 142  
       
Tip: Press and hold  
to cycle through text entry mode types (Word, Abc, and 123).  
to cycle between lower case, all caps, and intial caps.  
Press  
OK  
6. Use the navigation keys to select a text entry mode and press  
or  
CLR  
press  
to exit the pop-up menu.  
OK  
7. When you’re finished entering details for the note, press  
. The note is  
saved.  
Review, Edit, and Erase Notes  
OK  
1. From the main screen, press  
MENU, then press the right navigation  
OK  
key to  
Settings & Tools and press  
.
2. Press  
Tools, Notepad. The Notepad menu opens. If you  
have any stored notes, they appear as a list in the display.  
3. With a note highlighted, press the right soft key  
Options. A  
pop-up menu with the options listed in the following table appears in the  
display:  
• Edit: Edit the note currently highlighted or appearing in the display.  
• Erase: Erase the note currently highlighted or appearing in the display.  
O
K
• Erase Notes: Allows you to erase selected notes. Press  
Mark to mark a  
to Mark All.  
specific note to be erased or press the left soft key  
Press the left soft key  
Done to erase the notes.  
• Lock/Unlock: Locks or unlocks the entry to prevent accidental deletion.  
CLR  
4. Use the navigation keys to highlight an option or press  
to exit the  
pop-up menu.  
OK  
5. Press  
to perform the highlighted option’s function.  
143  
 
Mobile Web  
Section 11: Mobile Web  
Topics Covered  
Mobile Web  
Launching Mobile Web  
Exit Mobile Web  
Navigate the Web  
Mobile Web Soft Keys  
Links  
Place a Call While Using Mobile Web  
This section outlines the mobile web options available.  
Mobile Web  
Mobile Web allows you to surf the web from your wireless phone.  
If you receive a call while using Mobile Web, the web session is suspended during  
the call. Once the call ends, your Mobile Web session resumes where you left off.  
Note: This feature is currently unavailable outside of the United States. Only available within the Verizon  
Wireless Enhanced Services Area.  
Any time the service indicator icon is visible, you are connected to the Internet and billed accordingly.  
Rates and prices vary according to your service contract. For further information on billing contact  
Verizon Wireless.  
Launching Mobile Web  
Note: This feature is currently unavailable outside of the United States. Only available within the Verizon  
Wireless Enhanced Services Area.  
1. From the main screen, press the up navigation key. Mobile Web and a list  
of categories (representing one or more web sites) appears in the display.  
2. Use the navigation key to browse the categories.  
OK  
3. Once the desired category is highlighted, press  
to enter the category  
list.  
Mobile Web 144  
         
Exit Mobile Web  
To exit the Mobile Web, press the  
END  
key.  
Navigate the Web  
Note: This feature is currently unavailable outside of the United States. Only available within the Verizon  
Wireless Enhanced Services Area.  
When you use Mobile Web, some of the keys operate differently than during a  
normal phone call.  
Mobile Web presents on-screen items in any of the following ways:  
Text or numeric input  
Links (embedded in content)  
Numbered options (some options may not be numbered)  
Simple text  
You can act on the options or links by using the soft keys.  
Mobile Web Soft Keys  
Note: This feature is currently unavailable outside of the United States. Only available within the Verizon  
Wireless Enhanced Services Area.  
At the bottom of the Mobile Web display contains the browser commands. The  
left  
and right  
soft keys on the keypad are used to perform the  
commands in the display. These are called “soft keys” because their function  
changes depending where you are in the application.  
How Mobile Web keys work  
The following table lists Mobile Web keys and functions.  
Navigation Key: Use the navigation key to browse lists and  
highlight options.  
OK  
CLR Key: A browser back-up key. Press once to back up  
one page. Press and hold to go back to Mobile Web home  
page.  
CLR  
Press to clear the last number, letter, or symbol entered.  
Press and hold to completely clear the display.  
145  
           
Links  
Numbers 1 - 9: Use the number keys to select items in a  
@
menu if they are numbered.  
END Key: Press to exit Mobile Web and return the phone to  
END  
main screen.  
Left Soft Key: Press the left soft key to go to the highlighted  
web link and/or perform the function above it in the display.  
Right Soft Key: The right soft key is the Menu key. Press  
this key to display a pop-up menu with several options.  
SEND Key: Press to dial a highlighted number.  
SEND  
Links  
Note: This feature is currently unavailable outside of the United States. Only available within the Verizon  
Wireless Enhanced Services Area.  
Links can serve several purposes, such as jumping to a different page, to a different  
site, or initiating a phone call. Links are underlined (__). Normally, the left soft key  
OK  
or  
is used to select a highlighted link.  
Place a Call While Using Mobile Web  
Note: This feature is currently unavailable outside of the United States. Only available within the Verizon  
Wireless Enhanced Services Area.  
You can place a call while using Mobile Web if the website supports this feature.  
Press the appropriate soft key to call the number. In most cases you can also press  
END  
to call the number. The Internet connection terminates when you initiate the  
call. After you end the call, the Resume Browser screen displays.  
Mobile Web 146  
       
Section 12: Health and Safety Information  
Topics Covered  
This section outlines the safety precautions associated with using your phone. These  
safety precautions should be followed to safely use your phone.  
Health and Safety Information  
Exposure to Radio Frequency (RF) Signals  
Certification Information (SAR)  
Your wireless phone is a radio transmitter and receiver. It is designed and  
manufactured not to exceed the exposure limits for radio frequency (RF) energy set  
by the Federal Communications Commission (FCC) of the U.S. government.  
147  
       
Health and Safety Information  
These FCC exposure limits are derived from the recommendations of two expert  
organizations, the National Counsel on Radiation Protection and Measurement  
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE).  
In both cases, the recommendations were developed by scientific and engineering  
experts drawn from industry, government, and academia after extensive reviews of  
the scientific literature related to the biological effects of RF energy.  
The exposure limit set by the FCC for wireless mobile phones employs a unit of  
measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of  
the rate of absorption of RF energy by the human body expressed in units of watts  
per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit  
of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a  
substantial margin of safety to give additional protection to the public and to account  
for any variations in measurements.  
SAR tests are conducted using standard operating positions accepted by the FCC  
with the phone transmitting at its highest certified power level in all tested frequency  
bands. Although the SAR is determined at the highest certified power level, the  
actual SAR level of the phone while operating can be well below the maximum value.  
This is because the phone is designed to operate at multiple power levels so as to  
use only the power required to reach the network. In general, the closer you are to a  
wireless base station antenna, the lower the power output.  
Before a new model phone is available for sale to the public, it must be tested and  
certified to the FCC that it does not exceed the exposure limit established by the  
FCC. Tests for each model phone are performed in positions and locations (e.g. at  
the ear and worn on the body) as required by the FCC. For body worn operation, this  
phone has been tested and meets FCC RF exposure guidelines when used with an  
accessory that contains no metal and that positions the handset a minimum of  
1.5 cm from the body. Use of other accessories may not ensure compliance with  
FCC RF exposure guidelines.  
The FCC has granted an Equipment Authorization for this mobile phone with all  
reported SAR levels evaluated as in compliance with the FCC RF exposure  
guidelines. The maximum SAR values for this model phone as reported to the FCC  
are:  
Head: 0.872 W/kg  
Body-worn: 0.718 W/kg  
Health and Safety Information  
148  
SAR information on this and other model phones can be viewed on-line at  
http://www.fcc.gov/oet/ea. To find information that pertains to a particular model  
phone, this site uses the phone FCC ID number which is usually printed somewhere  
on the case of the phone.  
Sometimes it may be necessary to remove the battery pack to find the number. Once  
you have the FCC ID number for a particular phone, follow the instructions on the  
website and it should provide values for typical or maximum SAR for a particular  
phone. Additional product specific SAR information can also be obtained at  
Samsung Mobile Products and Recycling  
Samsung cares for the environment and encourages its customers to recycle  
Samsung mobile phones and genuine Samsung accessories.  
UL Certified Travel Adapter  
The Travel Adapter for this phone has met applicable UL safety requirements. Please  
adhere to the following safety instructions per UL guidelines.  
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS  
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE  
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.  
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW  
THESE INSTRUCTIONS.  
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN ATTACHMENT  
PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. THIS  
POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR  
HORIZONTAL OR FLOOR MOUNT POSITION.  
Consumer Information on Wireless Phones  
The U.S. Food and Drug Administration (FDA) has published a series of Questions  
and Answers for consumers relating to radio frequency (RF) exposure from wireless  
phones. The FDA publication includes the following information:  
149  
       
Consumer Information on Wireless Phones  
What kinds of phones are the subject of this update?  
The term wireless phone refers here to hand-held wireless phones with built-in  
antennas, often called "cell," "mobile," or "PCS" phones. These types of wireless  
phones can expose the user to measurable radio frequency energy (RF) because of  
the short distance between the phone and the user's head. These RF exposures are  
limited by Federal Communications Commission safety guidelines that were  
developed with the advice of FDA and other federal health and safety agencies.  
When the phone is located at greater distances from the user, the exposure to RF is  
drastically lower because a person's RF exposure decreases rapidly with increasing  
distance from the source. The so-called "cordless phones," which have a base unit  
connected to the telephone wiring in a house, typically operate at far lower power  
levels, and thus produce RF exposures well within the FCC's compliance limits.  
Do wireless phones pose a health hazard?  
The available scientific evidence does not show that any health problems are  
associated with using wireless phones. There is no proof, however, that wireless  
phones are absolutely safe. Wireless phones emit low levels of radio frequency  
energy (RF) in the microwave range while being used. They also emit very low levels  
of RF when in the stand-by mode. Whereas high levels of RF can produce health  
effects (by heating tissue), exposure to low level RF that does not produce heating  
effects causes no known adverse health effects. Many studies of low level RF  
exposures have not found any biological effects. Some studies have suggested that  
some biological effects may occur, but such findings have not been confirmed by  
additional research. In some cases, other researchers have had difficulty in  
reproducing those studies, or in determining the reasons for inconsistent results.  
What is FDA's role concerning the safety of wireless  
phones?  
Under the law, FDA does not review the safety of radiation-emitting consumer  
products such as wireless phones before they can be sold, as it does with new drugs  
or medical devices. However, the agency has authority to take action if wireless  
phones are shown to emit radio frequency energy (RF) at a level that is hazardous to  
the user. In such a case, FDA could require the manufacturers of wireless phones to  
notify users of the health hazard and to repair, replace or recall the phones so that  
the hazard no longer exists.  
Health and Safety Information  
150  
Although the existing scientific data do not justify FDA regulatory actions, FDA has  
urged the wireless phone industry to take a number of steps, including the following:  
Support needed research into possible biological effects of RF of the type emitted  
by wireless phones;  
Design wireless phones in a way that minimizes any RF exposure to the user that is  
not necessary for device function; and  
Cooperate in providing users of wireless phones with the best possible information  
on possible effects of wireless phone use on human health.  
FDA belongs to an interagency working group of the federal agencies that have  
responsibility for different aspects of RF safety to ensure coordinated efforts at the  
federal level. The following agencies belong to this working group:  
National Institute for Occupational Safety and Health  
Environmental Protection Agency  
Federal Communications Commission  
Occupational Safety and Health Administration  
National Telecommunications and Information Administration  
The National Institutes of Health participates in some interagency working group  
activities, as well.  
FDA shares regulatory responsibilities for wireless phones with the Federal  
Communications Commission (FCC). All phones that are sold in the United States  
must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA  
and other health agencies for safety questions about wireless phones.  
FCC also regulates the base stations that the wireless phone networks rely upon.  
While these base stations operate at higher power than do the wireless phones  
themselves, the RF exposures that people get from these base stations are typically  
thousands of times lower than those they can get from wireless phones. Base  
stations are thus not the primary subject of the safety questions discussed in this  
document.  
151  
Consumer Information on Wireless Phones  
What are the results of the research done already?  
The research done thus far has produced conflicting results, and many studies have  
suffered from flaws in their research methods. Animal experiments investigating the  
effects of radio frequency energy (RF) exposures characteristic of wireless phones  
have yielded conflicting results that often cannot be repeated in other laboratories. A  
few animal studies, however, have suggested that low levels of RF could accelerate  
the development of cancer in laboratory animals. However, many of the studies that  
showed increased tumor development used animals that had been genetically  
engineered or treated with cancer-causing chemicals so as to be pre-disposed to  
develop cancer in absence of RF exposure. Other studies exposed the animals to RF  
for up to 22 hours per day. These conditions are not similar to the conditions under  
which people use wireless phones, so we don't know with certainty what the results  
of such studies mean for human health.  
Three large epidemiology studies have been published since December 2000.  
Between them, the studies investigated any possible association between the use of  
wireless phones and primary brain cancer, glioma, meningioma, or acoustic  
neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of  
the studies demonstrated the existence of any harmful health effects from wireless  
phones RF exposures. However, none of the studies can answer questions about  
long-term exposures, since the average period of phone use in these studies was  
around three years.  
What research is needed to decide whether RF exposure  
from wireless phones poses a health risk?  
A combination of laboratory studies and epidemiological studies of people actually  
using wireless phones would provide some of the data that are needed. Lifetime  
animal exposure studies could be completed in a few years. However, very large  
numbers of animals would be needed to provide reliable proof of a cancer promoting  
effect if one exists. Epidemiological studies can provide data that is directly  
applicable to human populations, but ten or more years' follow-up may be needed to  
provide answers about some health effects, such as cancer. This is because the  
interval between the time of exposure to a cancer-causing agent and the time  
tumors develop - if they do - may be many, many years. The interpretation of  
epidemiological studies is hampered by difficulties in measuring actual RF exposure  
during day-to-day use of wireless phones. Many factors affect this measurement,  
such as the angle at which the phone is held, or which model of phone is used.  
Health and Safety Information  
152  
What is FDA doing to find out more about the possible  
health effects of wireless phone RF?  
FDA is working with the U.S. National Toxicology Program and with groups of  
investigators around the world to ensure that high priority animal studies are  
conducted to address important questions about the effects of exposure to radio  
frequency energy (RF).  
FDA has been a leading participant in the World Health Organization international  
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result  
of this work has been the development of a detailed agenda of research needs that  
has driven the establishment of new research programs around the world. The  
Project has also helped develop a series of public information documents on EMF  
issues.  
FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal  
Cooperative Research and Development Agreement (CRADA) to do research on  
wireless phone safety. FDA provides the scientific oversight, obtaining input from  
experts in government, industry, and academic organizations. CTIA-funded research  
is conducted through contracts to independent investigators. The initial research will  
include both laboratory studies and studies of wireless phone users. The CRADA will  
also include a broad assessment of additional research needs in the context of the  
latest research developments around the world.  
What steps can I take to reduce my exposure to radio  
frequency energy from my wireless phone?  
If there is a risk from these products - and at this point we do not know that there is  
- it is probably very small. But if you are concerned about avoiding even potential  
risks, you can take a few simple steps to minimize your exposure to radio frequency  
energy (RF). Since time is a key factor in how much exposure a person receives,  
reducing the amount of time spent using a wireless phone will reduce RF exposure.  
If you must conduct extended conversations by wireless phone every day, you  
could place more distance between your body and the source of the RF, since the  
exposure level drops off dramatically with distance. For example, you could use a  
headset and carry the wireless phone away from your body or use a wireless  
phone connected to a remote antenna.  
Again, the scientific data do not demonstrate that wireless phones are harmful. But if  
you are concerned about the RF exposure from these products, you can use  
measures like those described above to reduce your RF exposure from wireless  
phone use.  
153  
Consumer Information on Wireless Phones  
What about children using wireless phones?  
The scientific evidence does not show a danger to users of wireless phones,  
including children and teenagers. If you want to take steps to lower exposure to  
radio frequency energy (RF), the measures described above would apply to children  
and teenagers using wireless phones. Reducing the time of wireless phone use and  
increasing the distance between the user and the RF source will reduce RF  
exposure.  
Some groups sponsored by other national governments have advised that children  
be discouraged from using wireless phones at all. For example, the government in  
the United Kingdom distributed leaflets containing such a recommendation in  
December 2000. They noted that no evidence exists that using a wireless phone  
causes brain tumors or other ill effects. Their recommendation to limit wireless  
phone use by children was strictly precautionary; it was not based on scientific  
evidence that any health hazard exists.  
Do hands-free kits for wireless phones reduce  
risks from exposure to RF emissions?  
Since there are no known risks from exposure to RF emissions from wireless  
phones, there is no reason to believe that hands-free kits reduce risks. Hands-free  
kits can be used with wireless phones for convenience and comfort. These systems  
reduce the absorption of RF energy in the head because the phone, which is the  
source of the RF emissions, will not be placed against the head. On the other hand, if  
the phone is mounted against the waist or other part of the body during use, then  
that part of the body will absorb more RF energy. Wireless phones marketed in the  
U.S. are required to meet safety requirements regardless of whether they are used  
against the head or against the body. Either configuration should result in  
compliance with the safety limit.  
Do wireless phone accessories that claim to shield  
the head from RF radiation work?  
Since there are no known risks from exposure to RF emissions from wireless  
phones, there is no reason to believe that accessories that claim to shield the head  
from those emissions reduce risks. Some products that claim to shield the user from  
RF absorption use special phone cases, while others involve nothing more than a  
metallic accessory attached to the phone. Studies have shown that these products  
generally do not work as advertised. Unlike "hand-free" kits, these so-called  
"shields" may interfere with proper operation of the phone. The phone may be  
forced to boost its power to compensate, leading to an increase in RF absorption.  
Health and Safety Information  
154  
In February 2002, the Federal trade Commission (FTC) charged two companies that  
sold devices that claimed to protect wireless phone users from radiation with  
making false and unsubstantiated claims. According to FTC, these defendants  
lacked a reasonable basis to substantiate their claim.  
What about wireless phone interference with  
medical equipment?  
Radio frequency energy (RF) from wireless phones can interact with some electronic  
devices. For this reason, FDA helped develop a detailed test method to measure  
electromagnetic interference (EMI) of implanted cardiac pacemakers and  
defibrillators from wireless telephones. This test method is now part of a standard  
sponsored by the Association for the Advancement of Medical instrumentation  
(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and  
many other groups, was completed in late 2000. This standard will allow  
manufacturers to ensure that cardiac pacemakers and defibrillators are safe from  
wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary  
standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This  
standard specifies test methods and performance requirements for hearing aids and  
wireless phones so that no interference occurs when a person uses a compatible  
phone and a compatible hearing aid at the same time. This standard was approved  
by the IEEE in 2000.  
FDA continues to monitor the use of wireless phones for possible interactions with  
other medical devices. Should harmful interference be found to occur, FDA will  
conduct testing to assess the interference and work to resolve the problem.  
Additional information on the safety of RF exposures from various sources can be  
obtained from the following organizations (Updated 12/1/2006):  
FCC RF Safety Program:  
Environmental Protection Agency (EPA):  
Occupational Safety and Health Administration's (OSHA):  
National Institute for Occupational Safety and Health (NIOSH):  
World Health Organization (WHO):  
155  
Road Safety  
International Commission on Non-Ionizing Radiation Protection:  
National Radiation Protection Board (UK):  
US Food and Drug Administration  
Road Safety  
Your wireless phone gives you the powerful ability to communicate by voice, almost  
anywhere, anytime. But an important responsibility accompanies the benefits of  
wireless phones, one that every user must uphold.  
When driving a car, driving is your first responsibility. When using your wireless  
phone behind the wheel of a car, practice good common sense and remember the  
following tips:  
1. Get to know your wireless phone and its features, such as speed dial and  
redial. If available, these features help you to place your call without taking  
your attention off the road.  
2. When available, use a hands-free device. If possible, add an additional  
layer of convenience and safety to your wireless phone with one of the  
many hands free accessories available today.  
3. Position your wireless phone within easy reach. Be able to access your  
wireless phone without removing your eyes from the road. If you get an  
incoming call at an inconvenient time, let your voice mail answer it for you.  
4. Let the person you are speaking with know you are driving; if necessary,  
suspend the call in heavy traffic or hazardous weather conditions. Rain,  
sleet, snow, ice and even heavy traffic can be hazardous.  
5. Do not take notes or look up phone numbers while driving. Jotting down a  
"to do" list or flipping through your address book takes attention away  
from your primary responsibility, driving safely.  
6. Dial sensibly and assess the traffic; if possible, place calls when you are  
not moving or before pulling into traffic. Try to plan calls when your car will  
be stationary. If you need to make a call while moving, dial only a few  
numbers, check the road and your mirrors, then continue.  
Health and Safety Information  
156  
 
7. Do not engage in stressful or emotional conversations that may be  
distracting. Make people you are talking with aware you are driving and  
suspend conversations that have the potential to divert your attention from  
the road.  
8. Use your wireless phone to call for help. Dial 9-1-1 or other local  
emergency number in the case of fire, traffic accident or medical  
emergencies. Remember, it is a free call on your wireless phone!  
9. Use your wireless phone to help others in emergencies. If you see an auto  
accident, crime in progress or other serious emergency where lives are in  
danger, call 9-1-1 or other local emergency number, as you would want  
others to do for you.  
10. Call roadside assistance or a special non-emergency wireless assistance  
number when necessary. If you see a broken-down vehicle posing no  
serious hazard, a broken traffic signal, a minor traffic accident where no  
one appears injured, or a vehicle you know to be stolen, call roadside  
assistance or other special non-emergency number.  
"The wireless industry reminds you to use your phone safely when driving."  
For more information, please call 1-888-901-SAFE, or visit our web-site  
Important!: If you are using a handset other than a standard numeric keypad, please call 1-888-901-7233.  
Provided by the Cellular Telecommunications & Internet Association.  
Responsible Listening  
Caution!: Avoid potential hearing loss.  
Damage to hearing occurs when a person is exposed to loud sounds over time. The  
risk of hearing loss increases as sound is played louder and for longer durations.  
Prolonged exposure to loud sounds (including music) is the most common cause of  
preventable hearing loss. Some scientific research suggests that using portable  
audio devices, such as portable music players and cellular telephones, at high  
volume settings for long durations may lead to permanent noise-induced hearing  
loss. This includes the use of headphones (including headsets, earbuds, and  
Bluetooth or other wireless devices). Exposure to very loud sound has also been  
associated in some studies with tinnitus (a ringing in the ear), hypersensitivity to  
sound and distorted hearing.  
157  
 
Responsible Listening  
Individual susceptibility to noise-induced hearing loss and potential hearing problem  
varies. Additionally, the amount of sound produced by a portable audio device varies  
depending on the nature of the sound, the device settings, and the headphones that  
are used. As a result, there is no single volume setting that is appropriate for  
everyone or for every combination of sound, settings and equipment.  
You should follow some commonsense recommendations when using any portable  
audio device:  
Set the volume in a quiet environment and select the lowest volume at which you  
can hear adequately.  
When using headphones, turn the volume down if you cannot hear the people  
speaking near you or if the person sitting next to you can hear what you are  
listening to.  
Do not turn the volume up to block out noisy surroundings. If you choose to listen  
to your portable device in a noisy environment, you noise-cancelling headphones  
to block out background environmental noise. By blocking background  
environment noise, noise cancelling headphones should allow you to hear the  
music at lower volumes than when using earbuds.  
Limit the amount of time you listen. As the volume increases, less time is required  
before you hearing could be affected.  
Avoid using headphones after exposure to extremely loud noises, such as rock  
concerts, that might cause temporary hearing loss. Temporary hearing loss might  
cause unsafe volumes to sound normal.  
Do not listen at any volume that causes you discomfort. If you experience ringing in  
your ears, hear muffled speech or experience any temporary hearing difficulty  
after listening to your portable audio device, discontinue use and consult your  
doctor.  
You can obtain additional information on this subject from the following sources:  
American Academy of Audiology  
11730 Plaza American Drive, Suite 300  
Reston, VA 20190  
Voice: (800) 222-2336  
Internet: http://www.audiology.org  
Health and Safety Information  
158  
National Institute on Deafness and Other Communication Disorders  
National Institutes of Health  
31 Center Drive, MSC 2320  
Bethesda, MD 20892-2320  
Voice: (301) 496-7243  
Internet: http://www.cdc.gov/niosh/topics/noise/default.html  
National Institute for Occupational Safety and Health  
Hubert H. Humphrey Bldg.  
200 Independence Ave., SW  
Washington, DC 20201  
Voice: 1-800-35-NIOSH (1-800-356-4647)  
Internet: http://www.cdc.gov/niosh/topics/noise/default.html  
Operating Environment  
Remember to follow any special regulations in force in any area and always switch  
your phone off whenever it is forbidden to use it, or when it may cause interference  
or danger. When connecting the phone or any accessory to another device, read its  
user's guide for detailed safety instructions. Do not connect incompatible products.  
As with other mobile radio transmitting equipment, users are advised that for the  
satisfactory operation of the equipment and for the safety of personnel, it is  
recommended that the equipment should only be used in the normal operating  
position (held to your ear with the antenna pointing over your shoulder if you are  
using an external antenna).  
Using Your Phone Near Other Electronic Devices  
Most modern electronic equipment is shielded from radio frequency (RF) signals.  
However, certain electronic equipment may not be shielded against the RF signals  
from your wireless phone. Consult the manufacturer to discuss alternatives.  
159  
   
Using Your Phone Near Other Electronic Devices  
Implantable Medical Devices  
A minimum separation of six (6) inches should be maintained between a handheld  
wireless phone and an implantable medical device, such as a pacemaker or  
implantable cardioverter defibrillator, to avoid potential interference with the device.  
Persons who have such devices:  
Should ALWAYS keep the phone more than six (6) inches from their implantable  
medical device when the phone is turned ON;  
Should not carry the phone in a breast pocket;  
Should use the ear opposite the implantable medical device to minimize the  
potential for interference;  
Should turn the phone OFF immediately if there is any reason to suspect that  
interference is taking place.  
Should read and follow the directions from the manufacturer of your implantable  
medical device. if you have any questions about using your wireless phone with  
such a device, consult your health care provider.  
Hearing Aid Compatibility with Mobile Phones  
When some mobile phones are used near some hearing devices (hearing aids and  
cochlear implants), users may detect a buzzing, humming, or whining noise. Some  
hearing devices are more immune than others to this interference noise, and phones  
also vary in the amount of interference they generate.  
The wireless telephone industry has developed ratings for some of their mobile  
phones, to assist hearing device users in finding phones that may be compatible  
with their hearing devices. Not all phones have been rated. Phones that are rated  
have the rating on their box or a label on the box.  
The ratings are not guarantees. Results will vary depending on the user’s hearing  
device and hearing loss. If your hearing device happens to be vulnerable to  
interference, you may not be able to use a rated phone successfully. Trying out the  
phone with your hearing device is the best way to evaluate it for your personal  
needs.  
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to  
generate less interference to hearing devices than phones that are not labeled. M4 is  
the better/higher of the two ratings.  
Health and Safety Information  
160  
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more  
usable with a hearing device’s telecoil (“T Switch” or “Telephone Switch”) than  
unrated phones. T4 is the better/higher of the two ratings. (Note that not all hearing  
devices have telecoils in them.)  
Hearing devices may also be measured for immunity to this type of interference.  
Your hearing device manufacturer or hearing health professional may help you find  
results for your hearing device. The more immune your hearing aid is, the less likely  
you are to experience interference noise from mobile phones.  
Other Medical Devices  
If you use any other personal medical devices, consult the manufacturer of your  
device to determine if it is adequately shielded from external RF energy. Your  
physician may be able to assist you in obtaining this information. Switch your phone  
off in health care facilities when any regulations posted in these areas instruct you to  
do so. Hospitals or health care facilities may be using equipment that could be  
sensitive to external RF energy.  
Vehicles  
RF signals may affect improperly installed or inadequately shielded electronic  
systems in motor vehicles. Check with the manufacturer or its representative  
regarding your vehicle. You should also consult the manufacturer of any equipment  
that has been added to your vehicle.  
Posted Facilities  
Switch your phone off in any facility where posted notices require you to do so.  
Potentially Explosive Environments  
Switch your phone off when in any area with a potentially explosive atmosphere and  
obey all signs and instructions. Sparks in such areas could cause an explosion or fire  
resulting in bodily injury or even death.  
Users are advised to switch the phone off while at a refueling point (service station).  
Users are reminded of the need to observe restrictions on the use of radio equipment  
in fuel depots (fuel storage and distribution areas), chemical plants or where blasting  
operations are in progress.  
Areas with a potentially explosive atmosphere are often but not always clearly  
marked. They include below deck on boats, chemical transfer or storage facilities,  
vehicles using liquefied petroleum gas (such as propane or butane), areas where the  
air contains chemicals or particles, such as grain, dust or metal powders, and any  
other area where you would normally be advised to turn off your vehicle engine.  
161  
 
Emergency Calls  
Emergency Calls  
This phone, like any wireless phone, operates using radio signals, wireless and  
landline networks as well as user-programmed functions, which cannot guarantee  
connection in all conditions. Therefore, you should never rely solely on any wireless  
phone for essential communications (medical emergencies, for example).  
Remember, to make or receive any calls the phone must be switched on and in a  
service area with adequate signal strength. Emergency calls may not be possible on  
all wireless phone networks or when certain network services and/or phone features  
are in use. Check with local service providers.  
To make an emergency call:  
1. If the phone is not on, switch it on.  
2. Key in the emergency number for your present location (for example, 911  
or other official emergency number). Emergency numbers vary by location.  
SEND  
3. Press the  
key.  
If certain features are in use (call barring, for example), you may first need to  
deactivate those features before you can make an emergency call. Consult this  
document and your local cellular service provider.  
When making an emergency call, remember to give all the necessary information as  
accurately as possible. Remember that your phone may be the only means of  
communication at the scene of an accident; do not cut off the call until given  
permission to do so.  
Restricting Children's access to your Phone  
Your phone is not a toy. Children should not be allowed to play with it because they  
could hurt themselves and others, damage the phone or make calls that increase  
your phone bill.  
Health and Safety Information  
162  
 
FCC Notice and Cautions  
FCC Notice  
The phone may cause TV or radio interference if used in close proximity to receiving  
equipment. The FCC can require you to stop using the phone if such interference  
cannot be eliminated.  
Vehicles using liquefied petroleum gas (such as propane or butane) must comply  
with the National Fire Protection Standard (NFPA-58). For a copy of this standard,  
contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA  
02269, Attn: Publication Sales Division.  
Cautions  
Any changes or modifications to your phone not expressly approved in this document  
could void your warranty for this equipment, and void your authority to operate this  
equipment. Only use approved batteries, antennas and chargers. The use of any  
unauthorized accessories may be dangerous and void the phone warranty if said  
accessories cause damage or a defect to the phone.  
Although your phone is quite sturdy, it is a complex piece of equipment and can be  
broken. Avoid dropping, hitting, bending or sitting on it.  
Other Important Safety Information  
Only qualified personnel should service the phone or install the phone in a vehicle.  
Faulty installation or service may be dangerous and may invalidate any warranty  
applicable to the device.  
Check regularly that all wireless phone equipment in your vehicle is mounted and  
operating properly.  
Do not store or carry flammable liquids, gases or explosive materials in the same  
compartment as the phone, its parts or accessories.  
For vehicles equipped with an air bag, remember that an air bag inflates with great  
force. Do not place objects, including both installed or portable wireless equipment  
in the area over the air bag or in the air bag deployment area. If wireless  
equipment is improperly installed and the air bag inflates, serious injury could  
result.  
Switch your phone off before boarding an aircraft. The use of wireless phone in  
aircraft is illegal and may be dangerous to the aircraft's operation.  
Failure to observe these instructions may lead to the suspension or denial of  
telephone services to the offender, or legal action, or both.  
163  
   
Product Performance  
Product Performance  
Getting the Most Out of Your Signal Reception  
The quality of each call you make or receive depends on the signal strength in your  
area. Your phone informs you of the current signal strength by displaying a number  
of bars next to the signal strength icon. The more bars displayed, the stronger the  
signal.  
If you're inside a building, being near a window may give you better reception.  
Understanding the Power Save Feature  
If your phone is unable to find a signal after searching, a Power Save feature is  
automatically activated. If your phone is active, it periodically rechecks service  
availability or you can check it yourself by pressing any key.  
Anytime the Power Save feature is activated, a message displays on the screen.  
When a signal is found, your phone returns to standby mode.  
Understanding How Your Phone Operates  
Your phone is basically a radio transmitter and receiver. When it's turned on, it  
receives and transmits radio frequency (RF) signals. When you use your phone, the  
system handling your call controls the power level. This power can range from 0.006  
watts to 0.2 watts in digital mode.  
Maintaining Your Phone's Peak Performance  
For the best care of your phone, only authorized personnel should service your  
phone and accessories. Faulty service may void the warranty.  
There are several simple guidelines to operating your phone properly and  
maintaining safe, satisfactory service.  
If your phone is equipped with an external antenna, hold the phone with the  
antenna raised, fully-extended and over your shoulder.  
Do not hold, bend or twist the phone's antenna, if applicable.  
Do not use the phone if the antenna is damaged.  
If your phone is equipped with an internal antenna, obstructing the internal  
antenna could inhibit call performance.  
Speak directly into the phone's receiver.  
Avoid exposing your phone and accessories to rain or liquid spills. If your phone  
does get wet, immediately turn the power off and remove the battery. If it is  
inoperable, call Customer Care for service.  
Health and Safety Information  
164  
 
Availability of Various Features/Ring Tones  
Many services and features are network dependent and may require additional  
subscription and/or usage charges. Not all features are available for purchase or use  
in all areas. Downloadable Ring Tones may be available at an additional cost. Other  
conditions and restrictions may apply. See your service provider for additional  
information.  
Battery Standby and Talk Time  
Standby and talk times will vary depending on phone usage patterns and conditions.  
Battery power consumption depends on factors such as network configuration,  
signal strength, operating temperature, features selected, frequency of calls, and  
voice, data, and other application usage patterns.  
Battery Precautions  
Avoid dropping the cell phone. Dropping it, especially on a hard surface, can  
potentially cause damage to the phone and battery. If you suspect damage to the  
phone or battery, take it to a service center for inspection.  
Never use any charger or battery that is damaged in any way.  
Do not modify or remanufacture the battery as this could result in serious safety  
hazards.  
If you use the phone near the network's base station, it uses less power; talk and  
standby time are greatly affected by the signal strength on the cellular network  
and the parameters set by the network operator.  
Follow battery usage, storage and charging guidelines found in the user’s guide.  
Battery charging time depends on the remaining battery charge and the type of  
battery and charger used. The battery can be charged and discharged hundreds of  
times, but it will gradually wear out. When the operation time (talk time and  
standby time) is noticeably shorter than normal, it is time to buy a new battery.  
If left unused, a fully charged battery will discharge itself over time.  
Use only Samsung-approved batteries and recharge your battery only with  
Samsung-approved chargers. When a charger is not in use, disconnect it from the  
power source. Do not leave the battery connected to a charger for more than a  
week, since overcharging may shorten its life.  
Do not use incompatible cell phone batteries and chargers. Some Web sites and  
second-hand dealers, not associated with reputable manufacturers and carriers,  
might be selling incompatible or even counterfeit batteries and chargers.  
Consumers should purchase manufacturer or carrier recommended products and  
165  
     
Battery Precautions  
accessories. If unsure about whether a replacement battery or charger is  
compatible, contact the manufacturer of the battery or charger.  
Misuse or use of incompatible phones, batteries, and charging devices could result  
in damage to the equipment and a possible risk of fire, explosion, leakage, or other  
serious hazard.  
Extreme temperatures will affect the charging capacity of your battery: it may  
require cooling or warming first.  
Do not leave the battery in hot or cold places, such as in a car in summer or winter  
conditions, as you will reduce the capacity and lifetime of the battery. Always try to  
keep the battery at room temperature. A phone with a hot or cold battery may  
temporarily not work, even when the battery is fully charged. Li-ion batteries are  
particularly affected by temperatures below 0 °C (32 °F).  
Do not place the phone in areas that may get very hot, such as on or near a  
cooking surface, cooking appliance, iron, or radiator.  
Do not get your phone or battery wet. Even though they will dry and appear to  
operate normally, the circuitry could slowly corrode and pose a safety hazard.  
Do not short-circuit the battery. Accidental short-circuiting can occur when a  
metallic object (coin, clip or pen) causes a direct connection between the + and -  
terminals of the battery (metal strips on the battery), for example when you carry a  
spare battery in a pocket or bag. Short-circuiting the terminals may damage the  
battery or the object causing the short-circuiting.  
Do not permit a battery out of the phone to come in contact with metal objects,  
such as coins, keys or jewelry.  
Do not crush, puncture or put a high degree of pressure on the battery as this can  
cause an internal short-circuit, resulting in overheating.  
Dispose of used batteries in accordance with local regulations. In some areas, the  
disposal of batteries in household or business trash may be prohibited. For safe  
disposal options for Li-Ion batteries, contact your nearest Samsung authorized  
service center. Always recycle. Do not dispose of batteries in a fire.  
Health and Safety Information  
166  
Care and Maintenance  
Your phone is a product of superior design and craftsmanship and should be treated  
with care. The suggestions below will help you fulfill any warranty obligations and  
allow you to enjoy this product for many years.  
Keep the phone and all its parts and accessories out of the reach of small children.  
Keep the phone dry. Precipitation, humidity and liquids contain minerals that will  
corrode electronic circuits.  
Do not use the phone with a wet hand. Doing so may cause an electric shock to  
you or damage to the phone.  
Do not use or store the phone in dusty, dirty areas, as its moving parts may be  
damaged.  
Do not store the phone in hot areas. High temperatures can shorten the life of  
electronic devices, damage batteries, and warp or melt certain plastics.  
Do not store the phone in cold areas. When the phone warms up to its normal  
operating temperature, moisture can form inside the phone, which may damage  
the phone's electronic circuit boards.  
Do not drop, knock or shake the phone. Rough handling can break internal circuit  
boards.  
Do not use harsh chemicals, cleaning solvents or strong detergents to clean the  
phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water  
solution.  
Do not paint the phone. Paint can clog the device's moving parts and prevent  
proper operation.  
Do not put the phone in or on heating devices, such as a microwave oven, a stove  
or a radiator. The phone may explode when overheated.  
If your phone is equipped with an external antenna, use only the supplied or an  
approved replacement antenna. Unauthorized antennas or modified accessories  
may damage the phone and violate regulations governing radio devices.  
If the phone, battery, charger or any accessory is not working properly, take it to  
your nearest qualified service facility. The personnel there will assist you, and if  
necessary, arrange for service.  
167  
 
Standard Limited Warranty  
Section 13: Warranty Information  
Topics Covered  
Standard Limited Warranty  
Standard Limited Warranty  
What is Covered and For How Long? SAMSUNG  
TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the original  
purchaser ("Purchaser") that SAMSUNG's Phones and accessories ("Products") are  
free from defects in material and workmanship under normal use and service for the  
period commencing upon the date of purchase and continuing for the following  
specified period of time after that date:  
Phone  
1 Year  
Batteries  
1 Year  
Leather Case/ Pouch  
Holster  
90 Days  
90 Days  
1 Year  
Other Phone Accessories  
What is Not Covered? This Limited Warranty is conditioned upon proper use of  
Product by Purchaser. This Limited Warranty does not cover: (a) defects or damage  
resulting from accident, misuse, abuse, neglect, unusual physical, electrical or  
electromechanical stress, or modification of any part of Product, including antenna,  
or cosmetic damage; (b) equipment that has the serial number removed or made  
illegible; (c) any plastic surfaces or other externally exposed parts that are scratched  
or damaged due to normal use; (d) malfunctions resulting from the use of Product in  
conjunction with accessories, products, or ancillary/peripheral equipment not  
furnished or approved by SAMSUNG; (e) defects or damage from improper testing,  
operation, maintenance, installation, or adjustment; (f) installation, maintenance, and  
service of Product, or (g) Product used or purchased outside the United States or  
Canada.  
Warranty Information  
168  
       
This Limited Warranty covers batteries only if battery capacity falls below 80% of  
rated capacity or the battery leaks, and this Limited Warranty does not cover any  
battery if (i) the battery has been charged by a battery charger not specified or  
approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery  
are broken or show evidence of tampering, or (iii) the battery has been used in  
equipment other than the SAMSUNG phone for which it is specified.  
What are SAMSUNG's Obligations? During the applicable warranty period,  
SAMSUNG will repair or replace, at SAMSUNG's sole option, without charge to  
Purchaser, any defective component part of Product. To obtain service under this  
Limited Warranty, Purchaser must return Product to an authorized phone service  
facility in an adequate container for shipping, accompanied by Purchaser's sales  
receipt or comparable substitute proof of sale showing the date of purchase, the  
serial number of Product and the sellers' name and address. To obtain assistance on  
where to deliver the Product, call Samsung Customer Care at 1-888-987-4357.  
Upon receipt, SAMSUNG will promptly repair or replace the defective Product.  
SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts  
or components when repairing any Product or replace Product with a rebuilt,  
reconditioned or new Product. Repaired/replaced leather cases, pouches and  
holsters will be warranted for a period of ninety (90) days. All other repaired/replaced  
Product will be warranted for a period equal to the remainder of the original Limited  
Warranty on the original Product or for 90 days, whichever is longer. All replaced  
parts, components, boards and equipment shall become the property of SAMSUNG.  
If SAMSUNG determines that any Product is not covered by this Limited Warranty,  
Purchaser must pay all parts, shipping, and labor charges for the repair or return of  
such Product.  
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY? EXCEPT AS SET  
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE  
PRODUCT "AS IS," AND SAMSUNG MAKES NO WARRANTY OR REPRESENTATION  
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR  
OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,  
INCLUDING BUT NOT LIMITED TO:  
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR  
PURPOSE OR USE;  
WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;  
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED  
THEREIN; OR  
169  
Standard Limited Warranty  
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,  
SPECIFICATION OR CONTRACT PERTAINING THERETO.  
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO  
CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO  
THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY  
OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY  
LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY  
STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW  
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY  
TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY  
KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE  
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF  
USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY,  
INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR  
LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM  
ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT  
COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF  
CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER  
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION  
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR  
EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL  
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO  
STATE/PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO  
ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES  
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS  
HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL  
ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR  
THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES  
IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED  
AS THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE  
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.  
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE NO  
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE  
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY  
THIRDPARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE  
OR EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR  
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR  
Warranty Information  
170  
EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,  
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR  
EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER  
OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE  
MAY BE.  
This Limited Warranty allocates risk of Product failure between Purchaser and  
SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the  
limitations of liability contained in this Limited Warranty. The agents, employees,  
distributors, and dealers of SAMSUNG are not authorized to make modifications to  
this Limited Warranty, or make additional warranties binding on SAMSUNG.  
Accordingly, additional statements such as dealer advertising or presentation,  
whether oral or written, do not constitute warranties by SAMSUNG and should not be  
relied upon.  
Precautions for Transfer and Disposal  
If data stored on this device is deleted or reformatted using the standard methods,  
the data only appears to be removed on a superficial level, and it may be possible for  
someone to retrieve and reuse the data by means of special software.  
To avoid unintended information leaks and other problems of this sort, it is  
recommended that the device be returned to Samsung’s Customer Care Center for  
an Extended File System (EFS) Clear which will eliminate all user memory and return  
all settings to default settings. Please contact the Samsung Customer Care Center  
for details.  
Important!: Please provide warranty information (proof of purchase) to Samsung’s Customer Care Center  
in order to provide this service at no charge. If the warranty has expired on the device, charges  
may apply.  
Customer Care Center:  
1000 Klein St.  
Plano, TX 75074  
Toll Free Tel: 1.888.987.HELP (4357)  
171  
Standard Limited Warranty  
Samsung Telecommunications America, LLC  
1301 East Lookout Drive  
Richardson, Texas 75082  
Phone: 1-800-SAMSUNG (726-7864)  
Important!: If you are using a handset other than a standard numeric keypad, dial the numbers listed  
in brackets.  
Phone: 1-888-987-HELP (4357)  
©2007 Samsung Telecommunications America. All rights reserved.  
No reproduction in whole or in part allowed without prior written approval.  
Specifications and availability subject to change without notice.  
Warranty Information  
172  
icons 28  
new contact 28  
Index  
updating existing contact 28  
Camcorder  
recording video 130  
Camera  
taking pictures 128  
Change lock code 103  
Changing Message Settings 82  
Chat 85  
Numerics  
1-touch dialing 61  
2-touch dialing 61  
3G protocol icon 15  
3-touch dialing 61  
A
Adding a New Contact Entry 54  
Alarm clock  
Clear key 12  
Clock Format 99  
icon 15, 17  
Command Keys 12  
Contact List  
snooze 141  
turn off the alarm 141  
Answer options 107  
Auto retry 108  
finding a contact entry 60  
Contacts  
adding a new contact entry 54  
deleting a contact entry 60  
editing an existing contact  
entry 60  
B
Battery 20  
charging 24  
indicator 24  
installing 22  
removing 23  
Bluetooth 87  
about 87  
speed dialing 61  
Creating and Sending PICTURE  
Messages 70  
Creating and Sending TXT  
Messages 68  
Creating and Sending VIDEO  
Messages 71  
icons 16  
C
D
Calendar  
Dial Fonts 98  
Dialing  
add a new event 138  
Call Functions  
answering a call 26  
recent calls 27  
roaming 30  
one-touch 61  
three-touch 61  
two-touch 61  
Disable alarm 141  
Display 91  
Call history  
calls using 28  
definition 27  
deleting entry 30  
backlight 93  
banner 92  
language 100  
173  
   
screen icons 15  
Display Theme 98  
Downloading Music 114  
Drafts folder 79  
I
Icons  
alarm on 17  
alarm only 17  
auto answer icon 17  
display 15  
silent mode 17  
SSL icon 15  
E
Email 84  
End key 13  
Entering Text 48  
changing text entry mode 48  
entering numbers 51  
entering symbols 50  
entering upper and lower  
case 50  
vibrate mode 17  
Indicator  
1X signal strength 15  
battery strength 16  
bluetooth 16  
bluetooth active 16  
bluetooth connected 16  
calendar event 17  
D signal strength 15  
data call 16  
using word mode 49  
F
Finding a Contacts Entry 60  
Finding My Phone Number 63  
dormant 16  
G
EV signal strength 15  
EV1X signal strength 15  
keys lock 15  
location on 16  
message 17  
missed calls 17  
no service 16  
roaming 15  
speakerphone 17  
standalone 15  
TTY 16  
voice call 16  
voice privacy 15  
voicemail 17  
Get It Now 112  
Get New Picture 123  
Get Pictures & Videos 121  
Getting Started 4  
understanding this user  
manual 5  
GPS icon 16  
Groups  
creating 58  
move entries from/to 57  
send messages to 58  
send Picture msg to 59  
viewing 57  
H
Installing battery 22  
Health and Safety Information 147  
174  
playing with flip open 117  
transferring from PC 120  
Music & Tones 113  
My Music 116  
My Name Card 62  
L
Language setting 100  
Left soft key 12  
Links 146  
Lock code, changing 103  
Lock Mode  
N
placing an emergency  
Navigation key 13  
call 105  
Lock phone 102  
Navigation key shortcuts 42  
News & Info 134  
Non-Supported Battery 21  
Notes and tips 6  
Notes, description 6  
Notes, editing 143  
M
Making a call 25  
Menu Navigation 41  
menu outline 42  
Menu shortcuts 41  
Message Folders 75  
drafts 79  
P
Pause 56  
hard pause 56  
erase options 82  
inbox 75  
two-second pause 56  
Phone Info 111  
Phone Settings 99  
shortcut key 100  
standalone mode 99  
Picture-Video messages  
view later 75  
Place a call while using Mobile  
Web 146  
Playlist  
sent 77  
Messages, receive in call 75  
Messaging 67  
types of messages 67  
microSD Card  
formatting 114  
Mobile IM 84  
Mobile Web 144  
exit 145  
creating a playlist 118  
editing a playlist 119  
Powering off 4  
launch Mobile Web 144  
links 146  
navigate the web 145  
soft keys 145  
Powering on 4  
R
Mode  
Receive messages in call 75  
Receive text messages 68  
Receiving PICTURE Messages 73  
Receiving VIDEO Messages 74  
Record Video 130  
call answer 107  
Multimedia 112  
Music  
downloading 114  
playing with flip closed 116  
175  
Removing battery 23  
Retrieving a Message 68  
Return to last menu 41  
Return to the previous menu 41  
Reviewing sent 78  
Right soft key 12  
Roaming  
Speakerphone Key 13  
Speed dial, assigning 61  
Standard Limited Warranty 168  
Store numbers, shortcuts 54  
Storing numbers after a call 56  
Sync Music 120  
T
definition 30  
options 30  
Take Pictures 128  
Text messages, receiving 68  
Tip, description 6  
S
Safe Use of your phone 149  
Security  
Tools 86  
alarm clock 86, 140  
calculator 86, 136  
calendar 86, 138  
edit lock code 103  
lock phone 102  
voice privacy 108  
Security settings 101  
Send key 13  
Sent, reviewing messages 78  
Set an alarm 140  
Settings 86  
converter 137  
notepad 86, 142  
stop watch 86, 141  
tip, calculator 137  
view an event 139  
voice commands 86, 136  
world clock 86, 142  
Travel Charger 24  
TTY Mode 31, 108  
Turning Your Phone On and Off 4  
Two-touch dialing 61  
backlight 93  
banner 92  
display settings 91  
edit lock code 103  
language 100  
lock phone 102  
security settings 101  
tools 86  
U
Understanding Your Address book  
using contacts list 52  
Shortcut to menus 41  
signal strength icons 15  
Snooze 141  
Understanding Your Contacts 52  
Understanding Your Phone 7  
display screen 14  
Sounds 89  
features of your phone 8  
alert sounds 90  
call sounds 89  
keypad volume 90  
power on/off 91  
service alerts 91  
176  
V
V CAST Video  
browsing/playing clips 121  
configuring alerts 122  
deleting clips 122  
description 121  
downloading clips 122  
Video clips 121  
View an event, calendar 139  
View Picture-Video Msg Later 75  
Voice Commands  
description 33  
digit dial 34  
name dial 34  
name lookup 39  
phone status 38  
send picture 36  
send text 35  
Voice privacy 108  
Voicemail 83  
listening to 5  
Receive 83  
setting up 5  
viewing messages 84  
voicemail 17  
VoiceSignal  
features 33  
W
Wallpaper 93  
Warranty Information 168  
177  

Yamaha CD REWRITABLE DRIVE CRW8824S NB User Manual
Transcend Information SD User Manual
Toshiba Protege PT311U04C00U User Manual
Sony Walkman NW E013 User Manual
Seagate SAVVIO ST973401FC User Manual
Seagate BARRACUDA ST380021A User Manual
Seagate BARRACUDA 720010 SERIAL ATA ST3250410AS User Manual
RCA SMARTSNOOZE RP5440 User Manual (1)
Philips S890 User Manual
Philips KPATKOE PYKOBOACTBO 10FF3CMI User Manual