RCA RP5510i User Manual

v11.0 (EN/E)  
Reorient or relocate the  
receiving antenna.  
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE  
FCC information  
This device complies with Part  
15 of the FCC Rules. Operation  
is subject to the following two  
conditions: (1) This device may not  
cause harmful interference, and  
(2) this device must accept any  
interference received, including  
interference that may cause  
undesired operation.  
Increase the separation between  
the equipment and receiver.  
Connect the equipment into  
an outlet on a circuit different  
from that to which the receiver  
is connected.  
Consult the dealer or an  
experienced radio/TV technician  
for help.  
IMPORTANT SAFETY INSTRUCTIONS  
Some of the following information may  
not apply to your particular product;  
however, as with any electronic product,  
precautions should be observed during  
handling and use.  
Important Battery Precautions  
Use only with the cart,  
stand, tripod, bracket,  
or table specified by  
the manufacturer, or  
sold with the apparatus.  
When a cart is used, use caution  
when moving the cart/apparatus  
combination to avoid injury from  
tip-over.  
Connect power cord only to AC  
power source as marked on the  
product.  
Care should be taken so that objects  
do not fall into the product.  
Do not attempt to disassemble  
the cabinet. This product does  
not contain customer serviceable  
components.  
user manual  
manual de usuario  
Any battery may present a risk of  
fire, explosion, or chemical burn  
if abused. Do not try to charge a  
battery that is not intended to be  
recharged, do not incinerate, and  
do not puncture.  
Non-rechargeable batteries, such as  
alkaline batteries, may leak if left in  
your product for a long period of  
time. Remove the batteries from the  
product if you are not going to use  
it for a month or more.  
If your product uses more than one  
battery, do not mix types and make  
sure they are inserted correctly.  
Mixing types or inserting incorrectly  
may cause them to leak.  
]
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near  
water.  
RP5510i  
RP5512i  
This equipment has been tested  
and found to comply with the  
limits for a Class B digital device,  
pursuant to Part 15 of FCC Rules.  
These limits are designed to  
provide reasonable protection  
against harmful interference in  
a residential installation. This  
equipment generates, uses, and  
can radiate radio frequency  
energy and, if not installed  
and used in accordance with  
the instructions, may cause  
harmful interference to radio  
communications.  
However, there is no guarantee  
that interference will not occur  
in a particular installation. If  
this equipment does cause  
harmful interference to radio or  
television reception, which can  
be determined by turning the  
equipment off and on, the user is  
encouraged to try to correct the  
interference by one or more of  
the following measures  
Unplug this apparatus during  
lightning storms or when unused  
for long periods of time.  
IF YOUR PRODUCT OPERATES  
ON BATTERIES, adhere to the  
Changes or modifications not  
expressly approved by the party  
responsible for compliance could  
void the user’s authority to operate  
the equipment.  
Clean only with dry cloth.  
following precautions:  
A. Any battery may leak electrolyte  
if mixed with a different battery  
type, if inserted incorrectly, or if all  
batteries are not replaced at the  
same time.  
B. Any battery may leak electrolyte  
or explode if disposed of in fire  
or an attempt is made to charge  
a battery not intended to be  
recharged.  
Do not block any ventilation  
openings. Install in accordance with  
the manufacturer’s instructions.  
Do not install near any heat sources  
such as radiators, heat registers,  
stoves, or other apparatus (including  
amplifiers) that produce heat.  
Do not defeat the safety purpose  
of the polarized or grounding-type  
plug. A polarized plug has two  
blades with one wider than the  
other. A grounding type plug has  
two blades and a third grounding  
prong. The wide blade or the third  
prong is provided for your safety. If  
the provided plug does not fit into  
your outlet, consult an electrician  
for replacement of the obsolete  
outlet.  
Refer all servicing to qualified  
service personnel. Servicing is  
required when the apparatus has  
been damaged in any way, such  
as power-supply cord or plug is  
damaged, liquid has been spilled  
or objects have fallen into the  
apparatus, the apparatus has been  
exposed to rain or moisture, does  
not operate normally, or has been  
dropped.  
Maufacturer/Responsible Party  
Audiovox Electronics Corp.  
150 Marcus Blvd., Hauppauge,  
NY 11788  
Discard any leaky or deformed  
battery immediately. They may  
cause skin burns or other personal  
injury.  
Please help to protect the  
C. Discard leaky batteries  
IMPORTADOR PARA MEXICO:  
Audiovox Mexico, S. de R.L. de C.V.  
Ejercito Nacional 436 Piso 3  
Col. Chapultepec Morales C.P. 11570  
Mexico, D.F.  
environment by recycling or  
disposing of batteries according to  
federal, state, and local regulations.  
ADDITIONAL SAFETY INFORMATION  
Apparatus shall not be exposed to  
dripping or splashing and no objects  
filled with liquids, such as vases,  
shall be placed on the apparatus.  
Always leave sufficient space around  
the product for ventilation. Do  
not place product in or on a bed,  
rug, in a bookcase or cabinet that  
may prevent air flow through vent  
openings.  
immediately. Leaking batteries can  
cause skin burns or other personal  
injury. When discarding batteries,  
be sure to dispose of them in  
the proper manner, according to  
your state/provincial and local  
regulations.  
D. Do not expose batteries to  
excessive heat (for example, by  
leaving them in sunlight or close to  
fire).  
The descriptions and characteristics in  
this owner’s manual are for the purpose  
of general reference only and not as a  
guarantee. In order to provide you with  
the highest quality product, we may  
make changes or modifications without  
prior notice. The English version serves  
as the final reference on all product  
and operational details should any  
discrepancies arise in other languages.  
AME0712174Y4  
Protect the power cord from being  
walked on or pinched particularly at  
plugs, convenience receptacles, and  
the point where they exit from the  
apparatus.  
Do not place lighted candles,  
cigarettes, cigars, etc. on the  
product.  
EN/E  
It is important to read this user manual prior to using your new product for the first time.  
Es importante leer este manual antes de usar por vez primera su equipo.  
Only use attachments/accessories  
specified by the manufacturer.  
Service information  
Technical information  
Product: Clock Radio  
Brand: RCA  
Before you begin  
General controls  
This product should be serviced  
only by those specially trained in  
appropriate servicing techniques.  
For instructions on how to obtain  
service, refer to the warranty  
included in this user manual.  
Model: RP5510i, RP5512i  
To select radio, iPod or AUX mode  
Plugging in for power  
Insert the connector of the AC/DC  
adpater to the power jack at the  
bottom of the unit.  
External AC/DC adaptor input  
power supply: 100-240 V ~ 50/60 Hz  
power is restored so you will not  
have to reset the time or the  
alarm.  
Side views  
Front view  
Electrical consumption  
External AC/DC adaptor  
Input: 100-240 V ~ 50/60 Hz 0.7 A  
Display  
Install battery as follow:  
To select the  
To adjust  
1. Remove battery compartment  
door (located at the bottom of  
the radio) by applying thumb  
pressure to the tab on battery  
door and then lift the door  
out and off the cabinet.  
2. Insert 2 AA batteries  
(included).  
3. Replace the compartment door.  
Output: 10 V  
1.4 A  
radio frequency  
the volume  
For your records  
To turn off the unit  
(standby mode)  
In the event that service should be  
required, you may need the model  
number and the serial number. In  
the space below, record the date  
and place of purchase and the  
serial number:  
The AC/DC Adaptor supplied with  
this product is intended to be  
correctly orientated in a vertical or  
floor mount position.  
Power is fed to the unit even when  
it is not functioning. To cut the  
power supply off, the power cable  
must be unplugged.  
To select random  
playback mode  
To select the  
radio band  
To select the  
display brightness  
To select repeat  
playback mode  
Universal dock for iPod®  
(push to open or close)  
iPod is a trademark of Apple  
Computer, Inc., registered in the  
U.S. and other countries.  
Model No.:  
Date of Purchase:  
Place of Purchase:  
Serial No.:  
Battery back-up operation  
This clock radio is equipped with  
a memory holding system that  
can be powered with 2 “AA”  
batteries (included). The power  
failure protection circuit will not  
operate unless battery is installed.  
When normal household power  
is interrupted, or AC line cord  
is unplugged, the batteries will  
power the clock radio to keep  
track of time and alarm settings  
programmed into memory. When  
the battery backup functions,  
the digital display will not light,  
however, the function of alarm  
still occurs during the power  
interruption if remaining battery  
power is adequate. Normal  
To skip to the previous or next file,  
to search backward or forward  
Bottom view  
Note: we recommend that you  
replace the batteries every year.  
Press SET at the center to select adjusting the clock time,  
wake time 1 or wake time 2. Rotate the knob to adjust  
the clock time, wake time 1 or wake time 2.  
Top view  
Time zone selector (refer to “Clock”)  
Power failure indicator  
When external DC power is  
interrupted (disconnected) for a  
short period of time, both time  
and alarm settings will change  
(unless batteries are installed).  
After external DC power is  
restored (reconnected), the Digital  
Display will blink to indicate that  
power was interrupted and you  
should readjust the time and  
alarm settings.  
AUX input jack  
Daylight saving time  
button (refer to “Clock”)  
To activate  
Wake 1 settings  
and changes  
To activate  
Wake 2 settings  
and changes  
Wake 2 mode  
Battery compartment lock  
SEE MARKING ON BOTTOM OF PRODUCT  
Wake 1 mode  
Battery compartment  
(refer to “Battery back-up operation”)  
Refer to “NAP function”  
WARNING: TO PREVENT FIRE OR ELECTRICAL  
SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO  
RAIN OR MOISTURE.  
Refer to “Sleep function”  
To turn off the wake function momentarily,  
to turn off the sleep funtion  
operation will resume after AC  
Power jack for AC/DC adapter (10 V  
1.4 A)  
Clock  
Radio  
iPod  
Adapters  
WARNING: Avoid playing with  
these buttons when setting clock  
or wake time.  
Auto clock set  
US time zones  
Listening to the radio  
1. Press RADIO on the front of  
the unit to turn on the radio.  
2. Slide BAND to select the radio  
band. The selected radio band  
shows on the display.  
3. Rotate TUNING to select  
frequency. The selected  
frequency shows on the  
When tuning in FM stations, you  
may notice that the station you  
are tuning can be well-tuned on  
two or three nearby points on the  
dial. Always tune carefully at the  
loudest and clearest point.  
Connecting your iPod  
1. Push the universal dock for  
iPod on the front of the unit  
to open it.  
2. Eight adapters are supplied.  
Check the table on the right  
and use the appropriate  
adapter for your iPod.  
3. Place the adapter and then  
your iPod on the universal  
dock for iPod.  
4. Press iPod on the front of the  
unit to select the iPod mode.  
5. Playback from the iPod starts  
automatically.  
You do not have to set the clock  
time as a built-in automatic time  
set system is equipped in this clock  
powered by 3V (2 AA batteries,  
included and installed). All you  
have to do is to plug this clock for  
power and current time will be  
shown automatically after setting  
the time zone and daylight saving  
time (read below).  
Seattle  
Olympia  
Washington  
Maine  
Augusta  
Montana  
North Dakota  
Bismarck  
Salem  
Helena  
Minnesota  
St. Paul  
Montpelier  
Vt.  
N.H.  
Oregon  
Idaho  
Boise  
Concord  
Setting clock  
Boston  
Albany  
New York  
South Dakota  
Pierre  
Mass.  
Wisconsin  
Madison  
Providence  
Michigan  
Lansing  
Detroit  
R.I.  
Wyoming  
Hartford  
Conn.  
In case the memory holding  
batteries are accidentally  
removed, set the clock manually  
as below:  
New York  
Trenton  
Pennsylvania  
Philadelphia  
Harrisburg  
Md.  
Chicago  
Iowa  
Des Moines  
New Jersey  
Delaware  
Cheyenne  
Nebraska  
Sacramento Carson City  
Salt Lake City  
Utah  
Ohio  
Lincoln  
Nevada  
Indiana  
Illinois  
Springfield  
WAansnhapinolgiston, D.C.  
Columbus West  
San Francisco  
California  
AM Antenna  
Virginia  
Indianapolis  
Denver  
Richmond  
Virginia  
Topeka  
Colorado  
St. Louis  
Charleston  
Kansas  
Frankfort  
Kentucky  
Jefferson City  
A built-in ferrite rod antenna  
eliminates the need for an outside  
antenna for AM reception.  
Rotating the unit slightly may  
improve reception of distant AM  
stations.  
Las Vegas  
Summer  
Missouri  
Raleigh  
North Carolina  
Winter  
Nashville  
Tennessee  
Los Angeles  
Santa Fe  
Oklahoma  
Oklahoma City  
Memphis  
display.  
Arizona  
Phoenix  
Columbia  
Arkansas  
Little Rock  
1. Press SET on the top of the  
unit until the clock setting icon  
flashes on the display.  
2. Rotate the knob on the top  
of the unit to set the clock  
time. The time decrements or  
increments follows by a faster  
rate when you rotate and hold  
the knob. The clock setting  
South  
New Mexico  
Atlanta  
Carolina  
Alabama  
Montgomery  
Mississippi  
Jackson  
Georgia  
4. Press OFF to turn off the radio.  
Dallas  
Louisiana  
However, the batteries can also  
be exhausted and we recommend  
that you replace the batteries  
every year.  
Texas  
Baton  
Austin  
Rouge  
New Orleans  
Houston  
Built-in AFC  
Florida  
Miami  
The Built-in Automatic Frequency  
Control (AFC) works only on FM.  
It helps reducing drift on FM  
reception and keeping the radio  
locked in on the FM station to  
which it is tuned.  
Pacific  
Mountain  
Central Eastern  
Canadian time zones  
Made for:  
Setting time zone  
iPod with video (30GB, 60GB,  
80GB) 5th generation  
iPod photo (20GB U2 Special  
Edition, 30GB U2 Special  
Edition, 40GB, 60GB) 4th  
generation  
Slide the time zone selector at  
the bottom of the unit to Eastern,  
Central, Mountain or Pacific time  
zone (refer to the maps on the  
right).  
icon  
flashes when you are  
setting the time. AM or PM  
icon also shows beside the  
time.  
3. To save and exit the clock  
setting, wait for about 5  
seconds or press SET until the  
Yukon  
Territory  
Display brightness  
Nunavut  
Northwest Territories  
iPod (20GB, 20GB U2 Special  
Edition, 40GB) 4th generation  
iPod nano (2GB, 4GB, 8G) 1st,  
2nd & 3rd generations  
iPod mini (4GB, 6GB) 1st &  
2nd generations  
British  
Columbia  
Daylight saving time  
Press and hold DAYLIGHT  
Press BRIGHTNESS to dim the  
display and press again to restore  
to the original brightness level.  
When the display is dimmed, the  
blue indicator on the universal  
dock for iPod will also be turned  
off.  
Newfoundland  
* For the latest iPod models,  
please use the adapter provided  
with your iPod.  
Summer  
Alberta  
Winter  
Manitoba  
clock setting  
, WAKE 1 or  
SAVING TIME button on the  
bottom of the unit to turn on/ off  
in areas observing/ not observing  
such time change. The icon  
shows on the display when  
daylight saving time is active.  
Saskatchewan  
WAKE 2 icon is off. The clock  
time is now set.  
Quebec  
Saskatoon  
Regina  
Ontario  
Winnipeg  
iPod touch  
iPod classic  
Pacific  
Mountain  
Central Eastern  
iPod  
Wake function  
Turn off the wake  
function  
Silence the wake function  
momentarily:  
Press SNOOZE. The alarm  
will sound again when the  
snooze period is over. (refer to  
“SmartSnoozeTM”).  
Listening to iPod  
2. Press WAKE 1 or WAKE  
2 to select a wake mode.  
Corresponding icon lights on  
the front of the unit.  
SmartSnoozeTM  
the iPod when the function is  
activated. Press REPEAT until  
no repeat playback indication  
shows on the iPod to cancel  
the repeat playback.  
Set the wake time  
Waking to RADIO (  
)
3. Select a desired wake up radio  
channel (refer to “Listening  
to the radio”). If no wake  
up channel is set, your last  
listening radio station will be  
selected.  
4. Adjust the volume to your  
desired level.  
5. Press OFF to turn off the unit.  
1. During playback, press iPod to  
pause the playback and press  
again to resume.  
This operation allows extra sleep  
time after the wake function is on.  
The alarm will be off by pressing  
SNOOZE, SLEEP or NAP until  
the snooze period is over. Snooze  
function can be used repeatedly  
up to 2 hours. After this, the wake  
function will turn off until the  
next day.  
This unit allows 2 wake times to  
be set.  
When the wake  
function activates, the  
corresponding wake  
icon will flash until the  
wake function is turned off. The  
icon will then stop flashing and  
keep lighting up.  
1. Press SET on the top of the  
unit until the icon WAKE1 or  
WAKE2 flashes on the display.  
2. Rotate the knob on the top  
of the unit to set the wake  
time. The time decrements or  
increments follows by a faster  
rate when you rotate and hold  
the knob.  
3. To save and exit the wake  
time setting, wait for about 5  
seconds or press SET until the  
clock setting , WAKE 1 or  
WAKE 2 icon is off. The wake  
1 or wake 2 time is now set.  
1
1
1
2
2
2
– Wake time 1 by alarm  
– Wake time 1 by radio  
– Wake time 1 by iPod  
– Wake time 2 by alarm  
– Wake time 2 by radio  
– Wake time 2 by iPod  
2. Press  
previous or next file. Press and  
hold to search backward  
or forward.  
/
to skip to the  
/
Note:  
You may charge the battery  
of your iPod through the  
universal dock for iPod while  
the unit is turned off (standby  
mode) or in the iPod mode.  
Charging control should be  
operated on the iPod.  
If no iPod is connected in the  
iPod mode, the unit will exit  
the iPod mode and turn off  
automatically.  
3. Press SHUFFLE to play the files  
in random order in the iPod.  
Random playback indication  
shows on the iPod when the  
function is activated. Press  
again to cancel the function.  
4. Press REPEAT to select a  
repeat playback mode (repeat  
1 or repeat all). Repeat  
OR  
Waking to iPod (  
)
Set the “quiet” period as follow:  
While pressing SNOOZE, rotate  
the knob on the top of the unit to  
set the “quiet” period from 1 to  
30 minutes (default: 9 minutes).  
Release SNOOZE, then the  
Waking to Alarm (  
)
Stop the wake function:  
Press OFF. The alarm will be  
on again the following day at  
the same time.  
3. Adjust the volume to your  
desired level. The last played  
file on the iPod will be played  
when the wake function  
activates.  
Note:  
The unit equips with GRAD-U-  
WAKE feature, the alarm tone  
volume will increase gradually  
to its maximum in about 30 to  
45 seconds.  
OR  
4. Press OFF to turn off the unit.  
playback indication shows on  
“quiet” period is set.  
To check the wake time after  
setting, press SET until the  
icon WAKE1 or WAKE2 flashes  
and the respective assigned  
wake time shows on the  
display.  
If you set the wake function  
with low volume level before  
going to bed, we advise using  
Waking to Alarm mode to  
wake you up since the volume  
will automatically increase.  
When the AC power is  
Disable the wake function  
permanently:  
Press WAKE 1 or WAKE  
2 repeatedly until no  
Note: If there is no iPod  
connected, the alarm tone will  
sound instead even if Waking to  
iPod mode is selected.  
Auxiliary source  
corresponding wake indicator  
1. Connect your auxiliary source  
(e.g. mp3 player) to the AUX  
input jack on the top of the  
unit with an audio cable (not  
supplied).  
2. Press AUX to turn on the unit  
or to switch to listen to AUX  
from other modes. The AUX  
indicator on the front will turn  
on.  
Adjust the auxiliary player to  
mid-range volume and adjust  
the master volume on the unit.  
Do not turn the volume of the  
auxiliary player too high as this  
may affect the sound quality.  
For other playback operations,  
control them on your auxiliary  
player.  
(e.g.  
) shows on the  
display.  
disconnected, all wake mode  
will be reverted to alarm  
tone.  
Select the wake source  
You may be woken up by the  
alarm, radio, or music from iPod.  
1. Set a wake time (refer to the  
above instructions).  
product or part thereof which, in the  
opinion of the Company, has suffered  
or been damaged through alteration,  
improper installation, mishandling,  
misuse, neglect, accident, or by  
removal or defacement of the factory  
serial number/bar code label(s).  
THE EXTENT OF THE COMPANY’S  
LIABILITY UNDER THIS WARRANTY  
IS LIMITED TO THE REPAIR OR  
REPLACEMENT PROVIDED ABOVE  
AND, IN NO EVENT, SHALL THE  
COMPANY’S LIABILITY EXCEED THE  
PURCHASE PRICE PAID BY PURCHASER  
FOR THE PRODUCT.  
damage so the above limitations or  
exclusions may not apply to you.  
This Warranty gives you specific  
legal rights and you may also have  
other rights which vary from state  
to state.  
return any removable batteries,  
even if batteries were included  
with the original purchase. We  
recommend using the original  
carton and packing materials.  
Include evidence of purchase date  
such as the bill of sale. Also print  
your name and address and a  
description of the defect. Send via  
standard UPS or its equivalent to:  
Audiovox Electronics Corp.  
Attn: Service Department.  
150 Marcus Blvd.  
Warranty information  
12 Month Limited Warranty  
Applies to RCA Audio/Video Products  
Sleep function  
NAP function  
AUDIOVOX ELECTRONICS CORP.  
(the Company) warrants to the  
original retail purchaser of this  
product that should this product  
or any part thereof, under normal  
use and conditions, be proven  
defective in material or workmanship  
within 12 months from the date  
of original purchase, such defect(s)  
will be repaired or replaced with  
reconditioned product (at the  
Company’s option) without charge  
for parts and repair labor.  
In the sleep mode, the radio,  
iPod or AUX mode turns off  
automatically. To set the sleep  
time, simply:  
Press OFF to stop the NAP  
alarm, OR press and hold  
NAP until “OFF” is selected to  
cancel the NAP function.  
be played whenever the iPod  
mode is selected but without  
the corresponding device  
connected.  
For catnaps up to 2 hours without  
disturbing the regular alarm  
settings, the NAP function wakes  
you up after a short period of  
time. Simply:  
How to make a warranty claim:  
If your product is capable of storing  
content (such as an mp3 player,  
digital voice recorder, etc), it is  
recommended to make periodic  
backup copies of content stored  
on the product. If applicable,  
OR  
1. Press SLEEP repeatedly to cycle  
among the sleep time available  
(90min, 60min, 30min, 15min  
and OFF. 90min is the default  
setting).  
If an auxiliary player (e.g. mp3  
player) is connected, press AUX  
to select listening to it.  
3. Select a radio station as usual,  
OR  
1. Press NAP repeatedly to cycle  
among the NAP time available  
(10min, 20min, 30min, 60min,  
90min, 120min and OFF. 20min  
is the default setting).  
Hauppauge N.Y. 11788  
1-877-833-3491  
IMPORTADOR PARA MEXICO:  
Audiovox Mexico, S. de R.L. de  
C.V.  
Ejercito Nacional 436 Piso 3  
Col. Chapultepec Morales C.P.  
11570  
before shipping a product, make  
a back up copy of content or data  
stored on the device. Also, it is  
advisable to remove any personal  
content which you would not want  
exposed to others. IT IS LIKELY  
THAT CONTENTS AND DATA ON  
THE DEVICE WILL BE LOST DURING  
SERVICE AND REFORMATTING.  
AUDIOVOX ACCEPTS NO LIABILITY  
FOR LOST CONTENT OR DATA,  
OR FOR THE SECURITY OF ANY  
PERSONAL CONTENT OR DATA ON  
THE RETURNED DEVICE. Product  
will be returned with factory  
default settings, and without any  
pre-loaded content which may have  
been installed in the originally  
purchased products. Consumer will  
be responsible for reloading data  
and content. Consumer will be  
responsible to restore any personal  
preference settings.  
This Warranty is in lieu of all other  
express warranties or liabilities. ANY  
IMPLIED WARRANTIES, INCLUDING  
ANY IMPLIED WARRANTY OF  
Insure your shipment for loss or  
damage. Audiovox accepts no  
liability in case of damage or loss en  
route to Audiovox.  
Pay any charges billed to you by  
the Exchange Center for service not  
covered by the warranty.  
If necessary, press  
/
to  
Press iPod and then press  
/
To obtain repair or replacement  
within the terms of this Warranty,  
the product is to be delivered with  
proof of warranty coverage (e.g.  
dated bill of sale), specification of  
defect(s), transportation prepaid, to  
the Company at the address shown  
below.  
This Warranty does not extend to the  
elimination of externally generated  
static or noise, to correction of  
antenna problems, loss/interruptions  
of broadcast or internet service,  
to costs incurred for installation,  
removal or reinstallation of product,  
to corruptions caused by computer  
viruses, spyware or other malware,  
to loss of media, files, data or  
content, or to damage to tapes, discs,  
removable memory devices or cards,  
speakers, accessories, computers,  
computer peripherals, other media  
players, home networks or vehicle  
electrical systems.  
further set the sleep time.  
Each press of the button  
will decrease or increase one  
minute. For example, to set  
35 min, press SLEEP to select  
If necessary, press  
/
to  
to select a file on the iPod.  
Playback will be in repeat all  
files mode automatically.  
OR  
Start playback on your  
auxiliary player.  
further set the NAP time.  
Each press of the button  
will decrease or increase one  
minute. For example, to set  
35min, press NAP to select 30  
MERCHANTABILITY, SHALL BE  
LIMITED TO THE DURATION OF THIS  
WRITTEN WARRANTY. ANY ACTION  
FOR BREACH OF ANY WARRANTY  
HEREUNDER INCLUDING ANY IMPLIED  
WARRANTY OF MERCHANTABILITY  
MUST BE BROUGHT WITHIN A PERIOD  
OF 24 MONTHS FROM DATE OF  
ORIGINAL PURCHASE. IN NO CASE  
SHALL THE COMPANY BE LIABLE FOR  
ANY CONSEQUENTIAL OR INCIDENTAL  
DAMAGES FOR BREACH OF THIS OR  
ANY OTHER WARRANTY. No person  
or representative is authorized  
to assume for the Company any  
liability other than expressed herein  
in connection with the sale of this  
product.  
Mexico, D.F.  
AME0712174Y4  
A new or refurbished unit will be  
shipped to you freight prepaid.  
30min and then press  
times.  
5
min and then press  
5 times.  
EXPORTADOR:  
Audiovox Electronics Corp  
150 Marcus Blvd, Hauppauge,  
NY11788.  
The icon  
selecting.  
flashes while  
The icon NAP flashes while  
What we will do:  
Press SLEEP once to check the  
remaining sleep time. Press  
SLEEP repeatedly to select  
another sleep time.  
If you decide to turn off the  
unit sooner, press SNOOZE,  
OFF or press SLEEP repeatedly  
to select “OFF”.  
When the sleep mode is  
activated again, the sleep time  
will be the same as the one  
you have set before.  
Provide you with a new, or at our  
option, a refurbished unit. The  
exchange unit is under warranty for  
the remainder of the original product’s  
warranty period.  
selecting.  
2. When the desired sleep time  
is selected, release SLEEP and  
wait for about 5 seconds, the  
sleep time is now set. The  
2. When the desired NAP time is  
selected, release NAP and wait  
for about 5 seconds, the NAP  
time is now set. The current  
time shows and the icon NAP  
lights on the display.  
Audiovox Electronics Corp.  
150 Marcus Blvd, Hauppauge,  
NY 11788  
radio (default) turns on and  
For Canada Customers, please ship  
to:  
Audiovox Return Centre  
c/o Genco  
6685 Kennedy Road,  
Unit#3, Door 16,  
Mississuaga, Ontario  
the icon  
display.  
OR  
lights on the  
©2009 Audiovox Electronics Corp.  
Trademark(s) ® Registered  
Marque(s) ® Deposée(s)  
Marca(s) ® Registrada(s)  
Printed in China  
3. Press NAP once to show briefly  
the NAP time left.  
If the iPod is selected in your  
last sleep function setting, the  
iPod will start to play, instead  
of the radio. The radio will  
Only alarm tone can be  
Some states do not allow limitations  
on how long an implied warranty  
lasts or the exclusion or limitation  
of incidental or consequential  
Properly pack your unit. Include  
any remotes, memory cards, cables,  
etc. which were originally provided  
with the product. However DO NOT  
selected in the NAP mode.  
L5T 3A5  
This Warranty does not apply to any  

Xpelair XIM150 User Manual
VTech LS6426 3 User Manual
Sony WALKMAN EJ121 User Manual
Sony Ericsson CDX CA860X User Manual
Seagate Barracuda ST3160023AS User Manual
Scotts SMV122 User Manual
Rio Audio Advanced Digital Audio Center User Manual
Raymarine RAY220 User Manual
Philips FM04FD30B User Manual
Philips AJ 3900 User Manual