RCA RIR205 User Manual

user manual  
RIR200  
RIR205  
It is important to read this instruction book prior to using your new product for the first time.  
Safety information  
FCC information  
CAUTION  
This device complies with part 15 of the FCC rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference,  
and (2) This device must accept any interference  
received including interference which may cause  
undesired operation.  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
THE LIGHTNING FLASH  
AND ARROWHEAD  
WITHIN THE TRIANGLE  
IS A WARNING SIGN  
ALERTING YOU OF  
"DANGEROUS  
THE EXCLAMATION  
POINT WITHIN THE  
TRIANGLE IS A  
WARNING SIGN  
ALERTING YOU OF  
IMPORTANT  
CAUTION: TO REDUCE THE  
RISK OF ELECTRIC SHOCK,  
DO NOT REMOVE COVER (OR  
BACK). NO  
USER-SERVICEABLE PARTS  
INSIDE. REFER SERVICING TO  
QUALIFIED SERVICE  
VOLTAGE" INSIDE THE  
PRODUCT.  
INSTRUCTIONS  
ACCOMPANYING  
THE PRODUCT.  
PERSONNEL.  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection  
against harmful interference in a residential  
installation. This equipment generates, uses and  
can radiate radio frequency energy and, if not  
installed and used in accordance with the  
instructions, may cause harmful interference to  
radio communications. However, there is no  
guarantee that interference will not occur in a  
particular installation.  
SEE MARKING ON BOTTOM / BACK OF PRODUCT  
WARNING:  
TO PREVENT FIRE OR  
ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE  
THIS PRODUCT TO RAIN OR MOISTURE.  
Manufacturer/Responsible Party  
Audiovox Electronics Corp,  
150 Marcus Blvd, Hauppauge, NY 11788  
1-800-878-5779  
This Class B digital apparatus complies with Canadian  
ICES-003.  
If this equipment does cause harmful interference to  
radio or television reception, which can be  
determined by turning the equipment off and on,  
the user is encouraged to try to correct the  
interference by one or more of the following  
measures:  
Cet appareil numérique de la class B est conforme à la  
norme du NMB-003 du Canada.  
Technical specification  
Product: Wi-Fi Internet Radio  
Brand: RCA  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment  
and receiver.  
Model: RIR200, RIR205  
Connect the equipment into an outlet on  
a circuit different from that to which the  
receiver is connected.  
Consult the dealer or an experienced  
radio / TV technician for help.  
Electrical power source  
External AC adapter for radio  
Output: 9.0V DC 1.56A  
Input: 100-240V ~ 50/60Hz 0.7A  
In accordance with FCC requirements, changes or  
modifications not expressly approved by  
manufacturer could void the user’s authority to  
operate this product.  
External AC adapter for enabler (RIR205 only)  
Output: 5V DC 1A  
Input: 100V~240V AC Power  
RCA  
RIR200  
RCA  
RIR205  
3
Safety information  
Product registration  
registration.  
Important battery precautions  
Any battery may present a risk of fire, explosion,  
or chemical burn if abused. Do not try to charge  
a battery that is not intended to be recharged,  
do not incinerate, and do not puncture.  
Non-rechargeable batteries, such as alkaline  
batteries, may leak if left in your product for a  
long period of time. Remove the batteries from  
the product if you are not going to use it for a  
month or more.  
If your product uses more than one battery, do  
not mix types and make sure they are inserted  
correctly. Mixing types or inserting incorrectly  
may cause them to leak.  
For your records  
Keep your sales receipt for proof of purchase to  
obtain warranty parts and service.  
In the event that service should be required, you  
may need both the model number and the serial  
number. In the space below, record the date and  
place of purchase, and the serial number:  
Model No.  
Date of Purchase  
Place of Purchase  
Serial No.  
Discard any leaky or deformed battery  
immediately. They may cause skin burns or  
other personal injury.  
Please help to protect the environment by  
recycling or disposing of batteries according to  
federal, state, and local regulations.  
Precautions for the player  
Do not use the unit immediately after  
transportation from a cold place to a warm  
place; condensation problems may result.  
Avoid shock to the unit.  
Do not store the unit near fire, places with high  
temperature or in direct sunlight. Exposure to  
direct sunlight or extreme heat (such as inside a  
parked car) may cause damage or malfunction.  
Do not expose to rain or moisture.  
Do not operate or store unit in places with  
frequent static electricity or electrical noise (e.g.  
speaker, TV set).  
Clean the unit with a soft cloth or a damp  
chamois leather. Never use solvents.  
The unit must only be opened by qualified  
personnel.  
4
Safety information  
IMPORTANT SAFETY INSTRUCTIONS  
PLEASE READ AND SAVE FOR FUTURE REFERENCE  
Some of the following information may not apply to  
Servicing is required when the apparatus has  
been damaged in any way, such as power-  
supply cord or plug is damaged, liquid has been  
spilled or objects have fallen into the apparatus,  
the apparatus has been exposed to rain or  
moisture, does not operate normally, or has  
been dropped.  
your particular product; however, as with any  
electronic product, precautions should be observed  
during handling and use.  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with dry cloth.  
Do not block any ventilation openings. Install in  
accordance with the manufacturer’s instructions.  
Do not install near any heat sources such as  
radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
ADDITIONAL SAFETY INFORMATION  
Apparatus shall not be exposed to dripping or  
splashing and no objects filled with liquids, such  
as vases, shall be placed on the apparatus.  
Always leave sufficient space around the  
product for ventilation. Do not place product in  
or on a bed, rug, in a bookcase or cabinet that  
may prevent air flow through vent openings.  
Do not place lighted candles, cigarettes, cigars,  
etc. on the product.  
Connect power cord only to AC power source as  
marked on the product.  
Care should be taken so that objects do not fall  
into the product.  
Do not defeat the safety purpose of the  
polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
and a third grounding prong. The wide blade or  
the third prong is provided for your safety. If the  
provided plug does not fit into your outlet,  
consult an electrician for replacement of the  
obsolete outlet.  
Do not attempt to disassemble the cabinet. This  
product does not contain customer serviceable  
components.  
Protect the power cord from being walked on or  
pinched particularly at plugs, convenience  
receptacles, and the point where they exit from  
the apparatus.  
MAINS plug or an appliance coupler is used as  
the disconnect device, the disconnect device  
shall remain readily operable.  
Only use attachments/accessories specified by  
the manufacturer.  
Use only with the cart, stand, tripod, bracket, or  
table specified by the manufacturer, or sold with  
the apparatus. When a cart is used, use caution  
when moving the cart/apparatus combination  
to avoid injury from tip-over.  
IF YOUR PRODUCT OPERATES ON BATTERIES,  
adhere to the following precautions:  
A. Any battery may leak electrolyte if mixed with a  
different battery type, if inserted incorrectly, or if  
all batteries are not replaced at the same time.  
B. Any battery may leak electrolyte or explode if  
disposed of in fire or an attempt is made to  
charge a battery not intended to be recharged.  
C. Discard leaky batteries immediately. Leaking  
batteries can cause skin burns or other personal  
injury. When discarding batteries, be sure to  
dispose of them in the proper manner,  
]
Portable Cart Warning  
according to your state/provincial and local  
regulations.  
Unplug this apparatus during lightning storms  
or when unused for long periods of time.  
Refer all servicing to qualified service personnel.  
D. Batteries (battery pack or batteries installed)  
shall not be exposed to excessive heat such as  
sunshine, fire or the like.  
UL60065  
5
End user license agreement  
End user license agreement  
IMPORTANT: READ CAREFULLY BEFORE DOWNLOADING OR  
INSTALLING THIS SOFTWARE!  
(c) The Program may contain pre-release code that does not  
perform at the level of a final code release. In such case, the  
Program may not operate properly. Updated versions of the  
downloads  
(d) AUDIOVOX is not obligated to provide support services for the  
Program.  
(e) The Program is provided with “RESTRICTED RIGHTS. Use,  
duplication, or disclosure by the U.S. Government is subject to  
restrictions as set forth in subparagraph (c)(1)(ii) of DFARS  
252.227-7013, or FAR 52.227-19, or in FAR 52.227-14 Alt. III, as  
applicable.  
THIS END USER LICENSE AGREEMENT (THIS “EULA”) IS A LEGAL  
AGREEMENT BETWEEN YOU AND AUDIOVOX CORPORATION AND, AS  
APPLICABLE, ANY AUDIOVOX SUBSIDIARY, AS DEFINED BELOW  
(COLLECTIVELY “AUDIOVOX”), FOR THE RCA® BRAND INTERNET RADIO  
DEVICE APPLICATION/DRIVER SOFTWARE PROGRAM WHICH MAY  
INCLUDE ASSOCIATED SOFTWARE COMPONENTS, SOFTWARE  
LICENSED BY AUDIOVOX FROM THIRD PARTIES (“LICENSORS”) AND  
ASSOCIATED DOCUMENTATION, IF ANY (COLLECTIVELY, THE  
“PROGRAM”). THIS EULA CONTAINS IMPORTANT LEGAL LIMITATIONS,  
RESTRICTIONS AND DISCLAIMERS, AND ALSO SPECIFIES THE  
DURATION OF YOUR LICENSE.  
BY INSTALLING THE PROGRAM OR CLICKING ON THE ACCEPTANCE  
BUTTON OF THE PROGRAM, COPYING OR OTHERWISE USING THE  
PROGRAM, YOU ACKNOWLEDGE AND AGREE THAT YOU HAVE READ  
THIS EULA, UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS TERMS  
AND CONDITIONS. THIS PROGRAM IS PROTECTED BY COPYRIGHT  
LAWS AND INTERNATIONAL COPYRIGHT TREATIES, AS WELL AS OTHER  
INTELLECTUAL PROPERTY LAWS AND TREATIES. YOU MAY USE THE  
PROGRAM ONLY IN ACCORDANCE WITH THIS EULA, AND ANY SUCH  
USE IS HEREBY UNDERSTOOD TO BE CONDITIONAL UPON YOUR  
SPECIFIC AGREEMENT TO THE UNMODIFIED TERMS SET FORTH HEREIN.  
IF YOU DO NOT AGREE WITH ALL OF THE TERMS OF THIS EULA, CLICK  
ON THE REJECTION BUTTON AND/OR DO NOT INSTALL THE PROGRAM  
AND/OR DO NOT USE THE PROGRAM.  
3. TERM AND TERMINATION  
(a) Your license is effective on the date you accept this EULA and  
remains in effect until this EULA is terminated by either party.  
(b) You may terminate this EULA and the associated license, without  
any notice or delay, by destroying or permanently erasing the  
Program and all copies thereof.  
(c) If you fail to comply with any of the terms of this EULA, in whole  
or part, your license will automatically terminate without notice  
from AUDIOVOX.  
(d) Upon termination of this EULA and your associated license, you  
shall cease all use of the Program and destroy or permanently  
erase the Program and all full or partial copies thereof.  
4. WARRANTY DISCLAIMER  
THE PROGRAM IS PROVIDED “AS ISWITHOUT WARRANTY OF ANY  
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED  
TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A  
PARTICULAR PURPOSE, TITLE OR NON-INFRINGEMENT. THE ENTIRE  
RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS  
WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU (AND  
NOT AUDIOVOX, ITS LICENSORS, SUPPLIERS, OR ITS DEALERS)  
ASSUME THE ENTIRE COST FOR ALL NECESSARY REPAIR OR  
CORRECTION.  
1. LICENSE  
(a) Under this EULA, you are granted a non-exclusive, non-  
sublicenseable, non-assignable and non-transferable (except as  
expressly set forth below) license (i) to use and install the Program  
on a single workstation, and (ii) to make one (1) copy of the  
Program into any machine-readable form for backup of the  
Program, provided the copy contains all of the original Program's  
proprietary notices.  
(b) You may transfer the Program and license to another party only as  
a part of the RCA® brand Internet Radio Device (the “Device”), and  
only if the other party agrees to accept the terms and conditions  
of this EULA. If you transfer the Program, you must at the same  
time either transfer all copies to the same party or destroy any  
copies not transferred.  
(c) The terms of this EULA will govern any software upgrades or  
updates provided by AUDIOVOX that replace and/or supplement  
the original Program, unless such upgrade or update is  
accompanied by separate license terms and conditions in which  
case the terms of that separate license will govern. You  
acknowledge and agree that AUDIOVOX may automatically  
download upgrades or updates to the Program software to your  
computer in order to update, enhance, and/or further develop the  
Program.  
This exclusion of warranty may not be allowed under some applicable  
laws. As a result, the above exclusion may not apply to you, and you  
may have other rights depending on the law that applies to you.  
5. OWNERSHIP RIGHTS  
All title and intellectual property rights, including but not limited to  
copyrights, in and to the Program and any copies thereof are owned  
by AUDIOVOX, its Licensors or its suppliers. All title and intellectual  
property rights in and to the content which may be accessed through  
use of the Program is the property of the respective content owner  
and may be protected by applicable copyright or other intellectual  
property laws and treaties. This license grants you no rights to use  
such content. All rights not expressly granted are reserved by  
AUDIOVOX or its Licensors.  
6. LIMITATION OF LIABILITY  
2. LICENSE RESTRICTIONS  
(a) TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN  
NO EVENT SHALL AUDIOVOX, ITS LICENSORS, OR ITS DEALERS BE  
LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR  
CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING,  
WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS,  
BUSINESS INTERRUPTION, CORRUPTION OF FILES, LOSS OF  
BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS)  
REGARDLESS OF CAUSE OR FORM OF ACTION, INCLUDING  
CONTRACT, TORT, OR NEGLIGENCE, ARISING OUT OF YOUR USE  
OF OR INABILITY TO USE THE PROGRAM, EVEN IF AUDIOVOX HAS  
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW THE  
EXCLUSION OR LIMITATION OF LIABILITY OF CONSEQUENTIAL OR  
INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY  
TO YOU.  
(a) Except for the licenses expressly granted to you in this EULA, no  
other licenses or rights are granted or implied.  
(b) You may not (i) make the Program available over a network where  
it could be used by multiple computers at the same time; (ii)  
modify, translate, reverse engineer, decompile, disassemble  
(except to the extent that this restriction is expressly prohibited  
by law), or create derivative works based upon the Program; (iii)  
copy the Program, except as expressly permitted herein; (iv)  
remove or alter any copyright notices on all copies of the  
Program; or (v) rent, lease or lend the Program. You agree that  
you shall only use the Program in a manner that complies with all  
applicable laws in the jurisdictions in which you use the Program,  
including, but not limited to, applicable restrictions concerning  
copyright and other intellectual property rights.  
6
End user license agreement  
9. THIRD PARTY SOFTWARE  
(b) YOU ASSUME RESPONSIBILITY FOR THE SELECTION OF THE  
APPROPRIATE PROGRAM TO ACHIEVE YOUR INTENDED RESULTS,  
AND FOR THE INSTALLATION, USE, AND RESULTS OBTAINED.  
ANY THIRD PARTY SOFTWARE THAT MAY BE PROVIDED WITH THE  
PROGRAM IS INCLUDED FOR USE AT YOUR OPTION. IF YOU CHOOSE  
TO USE SUCH THIRD PARTY SOFTWARE, THEN SUCH USE SHALL BE  
GOVERNED BY SUCH THIRD PARTY'S LICENSE AGREEMENT, AN  
ELECTRONIC COPY OF WHICH WILL BE INSTALLED IN THE  
APPROPRIATE FOLDER ON YOUR COMPUTER UPON INSTALLATION OF  
THE SOFTWARE. AUDIOVOX IS NOT RESPONSIBLE FOR ANY THIRD  
PARTY’S SOFTWARE AND SHALL HAVE NO LIABILITY FOR YOUR USE  
OF THIRD PARTY SOFTWARE.  
7. WINDOWS MEDIA  
This product is protected by certain intellectual property rights of  
Microsoft. Use or distribution f such technology outside of this  
product is prohibited without a license from Microsoft.  
The software embedded within your Device (the “Device Firmware”)  
contains software licensed from Microsoft that enables you to play  
Windows Media Audio (WMA) files (“WMA Software”). The WMA  
Software is licensed to you for use with your Device under the  
following conditions. By installing and using this version of the  
Device Firmware, you are agreeing to these conditions. IF YOU DO  
NOT AGREE TO THE END USER CONDITIONS OF THIS SECTION 7, DO  
NOT INSTALL OR USE THIS VERSION OF THE DEVICE FIRMWARE.  
10. GOVERNING LAW  
If you acquired this Device in the United States, this EULA shall be  
governed and construed in accordance with the laws of the State of  
New York, U.S.A. without regard to its conflict of laws principles. If you  
acquired this Device outside the United States or the European Union,  
then local law may apply.  
11. GENERAL TERMS  
The WMA Software is protected by copyright and other intellectual  
property laws. This protection also extends to documentation for the  
WMA Software, whether in written or electronic form.  
This EULA can only be modified by a written agreement signed by  
you and AUDIOVOX, and changes from the terms and conditions of  
this EULA made in any other manner will be of no effect. If any  
portion of this EULA shall be held invalid, illegal, or unenforceable, the  
validity, legality, and enforceability of the remainder of the Agreement  
shall not in any way be affected or impaired thereby. This EULA is the  
complete and exclusive statement of the agreement between you  
and AUDIOVOX, which supersedes all proposals or prior agreements,  
oral or written, and all other communications between you and  
AUDIOVOX, relating to the subject matter of this hereof. AUDIOVOX’S  
Licensors shall be considered third party beneficiaries of this  
Agreement and shall have the right to enforce the terms herein.  
GRANT OF LICENSE. The WMA Software is only licensed to you as  
follows:  
You may use this version of the Device Firmware containing the WMA  
Software only as such use relates to your Device.  
You may not reverse engineer, decompile, or disassemble the WMA  
Software, except and only to the extent that such activity is expressly  
permitted by applicable law.  
You may transfer your right to use the Device Firmware only as part of  
a sale or transfer of your Device, on the condition that the recipient  
agrees to the conditions set forth herein. If the version of the Device  
Firmware that you are transferring is an upgrade, you must also  
transfer all prior versions of the Device Firmware that you have which  
include the WMA Software.  
MICROSOFT IS NOT PROVIDING ANY WARRANTY OF ANY KIND TO  
YOU FOR THE WMA SOFTWARE, AND MICROSOFT MAKES NO  
REPRESENTATION CONCERNING THE OPERABILITY OF THE WMA  
SOFTWARE.  
“AUDIOVOX SUBSIDIARY” shall mean any person, corporation, or  
other organization, domestic or foreign, including but not limited to  
subsidiaries, that is directly or indirectly controlled by Audiovox  
Corporation including, but not limited to, Audiovox Consumer  
Electronics, Inc. and Audiovox Electronics Corporation. For purposes  
of this definition only, the term “control” means the possession of the  
power to direct or cause the direction of the management and  
policies of an entity, whether by ownership of voting stock or  
partnership interest, by contract, or otherwise, including direct or  
indirect ownership of at least fifty percent (50%) of the voting interest  
in the entity in question.  
The WMA Software is of U.S. origin. Any export of this version of the  
Device Firmware must comply with all applicable international and  
national laws, including the U.S. Export Administration Regulations,  
that apply to the WMA Software incorporated in the Device Firmware.  
8. RealNetworks, Inc.  
Portions of this software are included under license from  
RealNetworks, Inc. Copyright 1995-2007, RealNetworks, Inc. All rights  
reserved.  
The portions of the Program licensed from RealNetworks, Inc. (“RN”)  
are provided AS IS WITHOUT WARRANTY OF ANY KIND. TO THE  
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, RN FURTHER  
DICLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING  
WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF  
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND  
NONINFRINGEMENT. TO THE MAXIMUM EXTENT PERMITTED BY LAW  
IN NO EVENT SHALL RN BE LIABLE FOR ANY CONSEQUENTIAL,  
INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE OR OTHER DAMAGES  
(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS).  
BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW THE  
EXCLUSION OR LIMITATION OF LIABILITY OF CONSEQUENTIAL OR  
INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO  
YOU.  
You may not modify, translate, reverse engineer, decompile,  
disassemble (except to the extent that this restriction is expressly  
prohibited by applicable law) or use other means to discover the RN  
Source Code or otherwise replicate the functionality of the Real  
Format Client Code.  
7
Before you begin  
Dear RCA customer,  
Thank you for purchasing the RCA Wi-Fi Internet Radio. This product will let you listen to Slacker™ Radio,  
Internet Radio, AM/FM tuner, weather forecast and music stored in the internal memory or a USB device.  
To start using your Wi-Fi Internet Radio, please follow the setup instructions in the following pages.  
1. Unpack the unit  
You should find the following items in the box:  
AM loop antenna  
Power adapter  
Ethernet cable  
Radio  
Setup  
Information  
Card  
Quick Start  
Guide  
For RIR205 only:  
Wi-Fi Enabler  
Power adapter  
Additional requirements  
Broadband Internet service  
Broadband (cable/DSL) modem, usually supplied by your Internet service provider  
An 802.11 b or g (Wi-Fi) wireless home network or Ethernet router/switch/hub with available LAN port  
For Wi-Fi connections, you may also need:  
Your wireless network’s SSID  
Your access password (for secure networks)  
Slacker is a trademark of Slacker, Inc. in the United States and other countries.  
8
Before you begin  
2. Setup your RCA Infinite Radio accounts  
To simplify setup on the radio please complete these steps:  
1. Find the Setup Information Card that contains your radio’s MAC address number (MAC:  
00-00-00-00-00-00) and activation PIN # (PIN: 0000). (This number is also found in the Device Info screen  
under the Settings menu in your radio.)  
2. Using any Internet-connected computer, go to www.rcainfiniteradio.com/setup and follow the online  
instructions.  
You will need to input your radio’s MAC address and PIN # to associate your radio with your personal  
settings.  
3. Optional: Insert AAA batteries in the base of the radio  
Follow the polarity markers in the battery compartment. The batteries power the clock and alarm* whenever  
the radio loses electricity. We recommend that you replace the batteries every year (or more often in case of  
multiple power outages) to avoid low battery power. Otherwise, clock and alarm accuracy may be affected  
when electricity supply is interrupted.  
* When the battery backup functions, the clock display will not light. However, the function of  
alarm still occurs during the power interruption if remaining battery power is adequate.  
4. For RIR205 only: Connect the RCA Wi-Fi Enabler to your network  
If your modem or router/hub/switch has only one LAN  
port and is connected to your PC, disconnect the  
N
A
L
Ethernet cable from the modem/router/hub/switch and  
connect it to the Enabler's LAN port.  
LAN  
r
we  
po  
N
A
L
Electrical outlet  
t
e
s
re  
N
WA  
POWER  
WA  
N
N
A
L
Broadband modem or  
Ethernet router/hub/switch  
LAN  
Make sure the power, WAN, and WIRELESS LEDs are on. The MODE LED state will vary depending on your  
network configuration. If the MODE, WPS, and WIRELESS LEDs are blinking simultaneously, this indicates  
a possible connection error. Please review your connections and then press and hold the Enabler’s WPS  
button for 3 seconds (the MODE LED should start blinking) to rescan your network configuration. The  
Enabler may restart multiple times during this process and take up to two minutes depending on your  
network configuration. The MODE LED will stop blinking when this process is completed. Go to www.  
rcainfiniteradio.com for more information.  
9
Before you begin  
5. Optional: Connect the radio using an Ethernet cable  
Use the Ethernet cable if you do not have a wireless (Wi-Fi) access point.  
N
A
L
LAN  
Broadband modem or  
Ethernet router/hub/switch  
LAN  
6. Plug in and turn on the radio  
Electrical outlet  
Exit the DEMO mode after  
turning on  
Press and release preset 1, then  
SLEEP/SNOOZE, then preset 6.  
10  
Before you begin  
7. Set up the radio  
Before the connection is complete, the radio  
may take some time to check for updates and  
retrieve account info from the server. Please wait  
until you hear a short congratulations message  
and "Setup is complete, enjoy the music" is  
displayed.  
If the radio requires your IP address, you can find  
this information on your broadband modem,  
router or access point’s administration setup  
page or manual.  
Refer to Using the menus on page 16 for  
more information on making choices and  
inputting information in menus.  
A. NOTE: When you turn on the radio for the first  
time, it will be in "DEMO" mode. To exit this  
mode, press and release preset 1, then SLEEP/  
SNOOZE, then preset 6 on top of the radio.  
5. Wireless  
B. After exiting the DEMO mode, the radio displays  
the Select Language screen. Press or to  
choose your language and then press SELECT.  
This method uses your existing Wi-Fi access  
point, broadband modem or router to connect  
the radio to your existing network.  
DEVICE SETUP  
Select language:  
English  
French  
Spanish  
You need to know your Wireless Network’s name  
(SSID) and if your wireless network has security  
enabled, you will also need to know your  
wireless networks password (sometimes called  
passphrase or key). You can find this information  
on your broadband modem, router or access  
point’s administration setup page or manual.  
You may also call your Internet Service Provider  
(ISP) if you do not know how to access the  
administration page in order to find this  
If you are using RCA Wi-Fi Enabler (RIR205),  
setup is done (except you may need to enter  
your Zip code).  
If you encounter problems to connect the radio  
to the Internet via RCA Wi-Fi Enabler, refer step 4  
on page 9 or page 29 Further help on Wi-Fi  
Enabler.  
information. They usually have a 1-800 number  
available. Once you have the below information  
you may write it down for future reference.  
If you are using your own access point or router,  
please read below.  
Wireless network name (SSID)  
Security Type (Only needed if your network  
has security enabled and your SSID is hidden,  
not broadcasted)  
Password/Key (Only needed if your network  
has security enabled)  
3. The Network Setup screen displays connection  
options:  
NETWORK SETUP  
Wired  
Wireless  
Connection info  
Select Wired to connect using an Ethernet cable.  
Go to step 4 to complete the connection.  
Select Wireless to connect using an existing  
Wi-Fi access point. Go to step 5 to complete the  
connection.  
At the Network Setup screen, press or to  
select Wireless and then press SELECT. The  
Network Setup screen then shows with two  
setup options. Press or to choose an option  
and then press SELECT.  
NETWORK SETUP  
Select a wireless  
setup option:  
Detect Networks  
Enter SSID  
4. Wired  
This method uses an Ethernet cable shown in  
step 5 on page 10 to wire the radio directly up  
to your broadband modem, router, hub, or  
switch. Make sure your Ethernet cable is  
properly connected.  
Detect Networks: to automatically scan for  
available networks and display a list of networks  
to choose from. Go to step 6 to complete the  
connection.  
At the Network Setup screen, press or to  
select Wired and then press SELECT if your  
network does not provide Wi-fi access.  
11  
Before you begin  
Enter SSID: to manually enter your networks  
information. Select this option if your Networks  
SSID is hidden. Go to step 7 to complete the  
connection.  
About password:  
Do not get your Network Password confused  
with your Windows or Mac system logon  
password since they can be different.  
Some wireless access point or routers  
may call the Wireless Network Password a  
passphrase or key. These terms are the same.  
6. If Detect Networks is selected, the SSID  
(network name) of those found will be displayed  
after searching. Press or to select a desired  
network and then press SELECT.  
About passphrase:  
This radio supports secured access points  
using the Wireless Equivalent Privacy (WEP)  
keys or Wi-Fi Protected Access (WPA and  
WPA2) standards.  
Networks Found  
Network 1  
Network 2  
Network 3  
WEP keys are either 10 or 26 characters long  
(characters: 0-9 and A-F) (e.g. 6E78214A52).  
Note that some Wi-Fi routers support  
passphrase generation for WEP security.  
However, there is no industry standard for  
WEP passphrase generation and this radio  
does not support WEP passphrases.  
If you are using a WEP secured access point,  
enter the WEP key (HEX format) instead of  
the passphrase.  
Signal strength is indicated by  
.
Secured network is indicated by (unsecured  
network has none, as Network 1 in the above  
example).  
If a secured network is selected, you will be  
required to enter your password in the Network  
Security screen. The radio should then connect  
to the Internet. Please wait until you hear a short  
congratulations message and the clock screen is  
displayed.  
After connecting to the Internet  
NETWORK SECURITY  
Enter Password/key  
If you did not activate your Infinite Radio  
accounts, or if the radio cannot get your details  
from the Infinite Radio server, the radio may ask  
for your ZIP code.  
_ _ _ _ _ _ _ _ _  
A B C D E F G  
Input your ZIP. The radio should then connect to  
Internet Radio.  
If the network SSID is hidden (not broadcasted),  
you will only see a padlock icon and signal  
strength bars like the 4th network shown above.  
Press to highlight Enter SSID on the display  
and then press SELECT. Then go to step 7 to  
complete your connection.  
Interference may sometimes block your network  
from showing up in the list. If this happens, press  
to show Refresh List and then press SELECT  
to try again.  
DEVICE SETUP  
Enter zip code for  
clock and weather:  
_ _ _ _ _  
0 1 2 3 4 5 6  
Demonstration mode  
The radio has a pre-installed demonstration. To exit  
the demonstration, press and release in sequence  
the buttons on top of the radio: preset 1, then  
SLEEP/SNOOZE, then preset 6.  
7. If Enter SSID is selected, the Network Security  
screen will be displayed. Enter your SSID.  
NETWORK SECURITY  
Enter network SSID  
Getting the latest firmware and  
information  
_ _ _ _ _ _ _ _ _  
A B C D E F G  
The radio will automatically alert you for upgrade if  
a new firmware is available. You may also go to  
www.rcainfiniteradio.com for the latest firmware  
and user manual for your radio. Follow the  
instructions there to download and install files.  
If your network is secured (indicated by ), enter  
your password. The radio should then connect to  
the Internet. Please wait until you hear a short  
congratulations message and the clock screen is  
displayed.  
12  
Before you begin  
Frequently asked questions  
For answers to frequently asked questions (FAQ's),  
To install the Enabler:  
The Enabler can be installed vertically or  
horizontally. Remove the standing brackets for  
horizontal installation. Rotate the antenna to  
improve signal reception.  
General controls of RCA Wi-Fi Enabler  
(for RIR205)  
Front view  
Antenna  
MODE  
WPS WIRELESS POWER  
WPS  
PRESS  
WiFi ENABLER  
WAN  
LAN  
To turn on the Wi-Fi Enabler:  
The Enabler will turn on automatically when power  
is connected.  
MODE  
WPS WIRELESS POWER  
WPS  
PRESS  
WiFi ENABLER  
WAN  
LAN  
To check the RCA Wi-Fi Enabler's status by  
reading the LEDs (Lights):  
Normally the POWER, WAN and WIRELESS LEDs  
will be on when the enabler is operating as a  
router.  
Back view  
The LAN LED will be on if there is an Ethernet  
cable connected from the LAN port on the  
Enabler to a computer.  
The MODE LED will be off when the Enabler is  
operating as a Router.  
The MODE LED will be on when the Enabler is  
operating as an (AP) Access Point.  
WAN port – connect to your  
existing access point,  
broadband modem or  
Power  
adapter jack  
Ethernet router/hub/switch  
To rescan the network configuration:  
RESET  
Your Wi-Fi Enabler comes preconfigured from the  
factory so normally no rescan should be  
necessary.  
LAN  
WAN  
POWER  
Press and hold the WPS key for 3 seconds. The  
MODE LED then starts blinking. This will indicate  
to the user that the unit is scanning the network  
to determine the correct mode for the new  
environment (i.e. either router or AP).  
LAN port – if your modem or  
router/hub/switch has only  
one LAN port and is  
Reset push  
button  
If during a scanning, the unit cannot determine  
the mode or needs more information (i.e. no  
response from the WAN connection, PPPOE, fixed  
IP address connection, etc) the unit will start  
flashing the MODE, WPS and WIRELESS LEDs.  
connected to your PC,  
disconnect the Ethernet cable  
from the modem/router/hub/  
switch and connect it to the  
Enabler's LAN port.  
You can also connect it to your  
computer's Ethernet port to  
access the Enabler's web-  
administration page for  
troubleshooting purposes.  
Refer to page 31 for more  
information.  
To reset the Enabler:  
If you are unable to connect the radio to the  
Wi-Fi enabler, press and hold the RESET for 10  
seconds to reset the Wi-Fi enable back to factory  
defaults. After resetting the Wi-Fi enabler, try  
connecting again.  
13  
Before you begin  
Placement of Wi-Fi Enabler  
The placement of the RCA Wi-Fi Enabler and also  
interference can affect the radio and Wi-Fi Enablers  
operation; therefore choose placement wisely and  
try to reduce interference in the beginning will  
ensure a pleasant experience.  
To choose Wi-Fi Enabler placement:  
For best results, place your RCA Wi-Fi Enabler:  
Near the center of the area in which your  
computer and radio will operate.  
In an elevated location such as a high shelf  
where the wirelessly connected radio have line-  
of-sight access (even if through walls).  
Avoid obstacles to wireless signals.  
Keep wireless devices at least 2 feet (0.6m) from  
large metal fixtures such as file cabinets,  
refrigerators, pipes, metal ceilings, reinforced  
concrete, and metal partitions.  
Keep wireless devices away from large amounts  
of water such as fish tanks and water coolers.  
To reduce interference:  
Avoid windows unless communicating between  
buildings.  
Place wireless devices away from various  
electromagnetic noise sources, especially those  
in the 2400 – 2500 MHZ frequency band.  
Common noise-creating sources are:  
2.4 and 2.5GHz cordless phones, computers,  
other wireless routers, access points and fax  
machines (no closer than 1 foot (0.3m)).  
Copying machines, elevators, and cell phones  
(no closer than 6 feet (1.8m)).  
Microwave ovens (no closer than 10 feet (3m)).  
14  
General controls  
Front and top  
Sleep timer/  
snooze  
Station presets  
On/standby  
Volume  
WEATHER  
Audio source  
Alarm set  
Clock set  
Weather  
information  
Home/Main menu  
“Love It”  
Record  
“Ban It”  
Tag it”  
Play/pause  
Display  
Menu up  
Next/scan/fast  
forward/menu  
forward  
Previous/scan  
back/reverse/  
menu back  
Menu down  
Menu select  
Rear  
AM loop  
antenna socket  
FM antenna  
LAN port  
Power adapter  
input socket  
Headphone/  
audio line-out  
Full-speed  
USB port  
You can connect USB devices to the USB port:  
The radio can play MP3, WMA and RealAudio audio  
files stored on the connected USB device.  
RealAudio is a trademark or a registered trademark of RealNetworks, Inc.  
15  
General controls  
Turning on or off  
To input characters:  
Press ON/STANDBY to turn the radio on or off  
(standby mode).  
Some menus require  
character input (e.g.  
password, ZIP code).  
ZIP code is useful for  
clock time setting,  
NETWORK SECURITY  
Enter Password/key  
_ _ _ _ _ _ _ _ _  
A B C D E F G  
Volume control  
Rotate the VOL. knob to adjust the volume.  
weather forecast and  
searching local Internet radio stations in your  
area.  
When inputting characters, press or to  
select the alpha-numeric characters listed at the  
bottom of the screen. Press SELECT to confirm  
selections.  
Press or to choose among uppercase,  
lowercase, numeric, special characters or  
commands.  
Source selection  
Press SOURCE repeatedly to select among the  
following audio content sources:  
Slacker Radio, Internet Radio, USB Input, Internal  
Memory, FM Tuner, AM Tuner  
Weather forecast  
Press WEATHER to check current and 3-day forecast.  
Refer to page 26 for more information.  
Character sets ( or  
Upper case  
Lower case  
Numeric  
Special  
Commands  
)
Options ( or  
A B C D E...X Y Z  
a b c d e...x y z  
1 2 3 4 5 6 7 8 9 0  
_ – ! @ # $ % ^ & *  
(read below)  
)
Clock and alarm  
Press CLOCK once to show the current time or  
press and hold to set the clock time.  
Press ALARM once to activate or deactivate the  
alarm clock or press and hold to set the alarm.  
Refer to page 17-18 for more information.  
Commands: press or (or or ) to choose  
the desired command and then press SELECT.  
Using the menus  
The display window shows the playback screen,  
browse screen, settings screen, messages etc. What  
appears on the window varies depending on the  
function you are using.  
Commands Actions  
DONE  
Delete  
Ends entry  
Deletes highlighted input and  
moves the highlight back one  
space  
To display the Source menu:  
Press to display the  
Source menu for  
selection of an audio  
source.  
SOURCE  
Space  
Back  
Inserts a blank space, characters  
to the right will move one location  
over  
Moves the highlight back within  
the entered character without  
deleting  
Slacker Radio  
Internet Radio  
FM Tuner  
>
>
>
>
AM Tuner  
Now Playing –  
appears at the top of  
the Source menu when a station is playing.  
Select this option to return to the play screen.  
Next  
Moves the highlight forward  
within the entered character  
without deleting  
To navigate in the menus:  
Use the navigation controls to make  
choices and input information.  
Cancel  
Exits input screen without changes  
To exit the input screen without saving,  
select the Cancel command.  
Moves highlight up  
Moves highlight down  
Moves selection/navigates left  
Moves selection/navigates right  
SELECT Confirms selected option or character  
16  
Clock and alarm  
Accessing the digital clock  
The Wi-Fi Internet Radio also includes a digital clock  
which will be automatically updated when  
connected with the Internet.  
Using the alarm clock  
To set the wake time and sound:  
1. Press and hold ALARM until the hour time of the  
alarm clock is highlighted (reversed color) on the  
display.  
Wi-Fi connection  
strength  
Mon 2/24  
10:55AM  
Set Alarm  
7:04AM  
AL:7:30AM  
71oF  
Current temperature  
Select Sound  
Alarm clock status  
Press CLOCK to show the clock without  
interrupting audio playback.  
To hide the clock and return the display to the  
previous screen, press CLOCK again.  
The clock is also displayed when the radio is  
turned off (standby mode).  
2. Press or to select the wake hour time.  
3. Press to shift to minute time.  
4. Press or to select the wake minute time.  
5. Press to shift to AM/PM.  
Setting the clock  
6. Press or to select between AM and PM.  
With your ZIP code set, the clock time will be  
automatically updated when connected with the  
Internet. However, you may still be able to set it  
manually. Day, date and month can only be updated  
by connecting with an Internet radio station.  
7. Press to shift to Select Sound and then press  
SELECT.  
8. Press or to highlight one of the sources of  
wake sound:  
1. Press and hold CLOCK until the hour time is  
highlighted (reversed color) on the display.  
Buzzer  
AM Presets  
FM Presets  
Slacker Presets  
Internet Presets  
Set Clock  
9:04AM  
Read relevant sections (e.g. Slacker Radio)  
in this user manual to understand how to  
preset stations.  
2. Press or to select the hour time.  
3. Press to shift to minute time.  
9. Press SELECT on the highlighted source of wake  
sound and then press or to select the  
desired sound or preset item.  
4. Press or to select the minute time.  
5. Press to shift to AM/PM.  
10. Press SELECT to confirm the selected item as the  
6. Press or to select between AM and PM.  
7. Press SELECT again to confirm the setting.  
wake sound.  
When the radio loses electricity, the alarm clock  
will be powered by the batteries inserted at the  
base (refer to page 9). The wake sound selected  
will be reverted to the default buzzer.  
You may also adjust the clock time  
When the selected sound is no longer available,  
the default buzzer will sound.  
manually and turn off the automatic time  
update (Auto Sync) when connected with  
the Internet. Refer to Advanced Settings on  
page 27 for more information.  
17  
Clock and alarm  
To activate or deactivate the alarm clock:  
1. Press ALARM.  
2. If alarm is off, press ALARM again to activate it.  
If alarm is already on, press ALARM again to  
deactivate it.  
To turn off the alarm clock when it sounds:  
Press ALARM or ON/STANDBY to turn off the  
alarm clock. It will sound again on the next day if  
settings have not been changed.  
OR  
Press SLEEP/SNOOZE to turn off the alarm clock  
temporarily for extra sleep time. The alarm will  
sound again after 10 minutes.  
OR  
The alarm clock will turn off automatically after  
60 minutes without pressing any button.  
Sleep mode  
You can set the radio to play for a set length of time  
before turning off automatically.  
1. Press SLEEP/SNOOZE to turn on the Sleep mode  
while listening to the radio.  
Sleep: 15 min  
Press again to add  
more time  
The default time is 15 minutes.  
If the radio is off, press SLEEP/SNOOZE to turn  
on the Sleep mode with the last used channel.  
2. If necessary, press SLEEP/SNOOZE again to add  
extra sleep time up to 90 minutes. Each press of  
the button will add 15 minutes.  
The remaining time before turning off  
automatically will show at bottom right of the  
clock display, replacing the weather information.  
Select OFF (press SLEEP/SNOOZE once more  
after 90 min) if you decide not to use the sleep  
mode. The radio will turn off.  
To cancel the Sleep mode sooner, press ON/  
STANDBY.  
18  
Slacker Radio  
Slacker Radio is a premium, streaming content  
provider partner which offers "personalization"  
through the use of selectable "Love it" and "Ban it"  
buttons. It also uses artist recommendation and  
related artists to further assist discovery of music  
and enjoyment of stations.  
Listening to Slacker Radio  
To select a station (free account users):  
1. Press or to highlight a station genre and  
then press SELECT.  
SLACKER RADIO  
Slacker spotlight>  
Top Stations  
Alternative  
Blues  
>
>
>
You can listen to Slacker Radio with an anonymous  
account for a limited time only with some limited  
functionality. Register a FREE account in order to  
take full advantage of the station creation and song  
rating system. A premium subscription is also  
available, but not required. For more information  
regarding Slacker Radio accounts, please visit www.  
slacker.com.  
Some genres may contain sub-genres for  
selection.  
Custom stations can only be created through the  
Slacker website.  
2. While a station is highlighted, press SELECT. The  
selected station will start to play.  
SLACKER:  
Alternative  
Pearl Jam  
To use your Slacker account, the account  
information in the radio (refer to  
Account Info on page 27) must match  
3:04/4:27  
your Slacker account information online.  
Next: The Chiefs  
Press to pause or resume playback.  
Accessing Slacker Radio  
3. Press to skip to the next song.  
Press SOURCE repeatedly to select Slacker  
Free account limits to 6 skips per hour per  
station.  
Radio.  
OR  
Press or to highlight Slacker Radio in the  
Source menu and then press SELECT.  
To select a station (Premium account users):  
1. Press or to highlight Station or Library and  
then press SELECT.  
SLACKER PREMIUM  
Stations  
Library  
>
>
2. When Station is selected, press or to  
highlight a station genre and then press SELECT.  
When Library is selected, press or to  
highlight an artist and then press SELECT to  
further select a song from the selected artist.  
19  
Slacker Radio  
To store the current station as a preset:  
1. Select a station.  
Tag Options  
Two options are available while you are listening to  
a Slacker Radio station as you press . Press or  
to highlight an option in the Tag Options menu and  
then press SELECT to proceed.  
2. Press and hold 1, 2, 3, 4, 5 or 6 on top of the  
radio until a beep sound is heard to store the  
current station to that preset button.  
SLACKER RADIO  
Create Station  
Send to Alarm  
To listen to a preset station, press 1-6.  
To edit a preset station, repeat the steps above  
to overwrite the previously stored station.  
You can assign a preset station as the wake  
sound of the alarm, refer to page 17 for more  
information.  
Create Station  
To create a new station using the currently  
playing artist as the seed song (this function is  
the same as pressing and holding while  
listening).  
To mark a song as favorite:  
Press while listening. The current song will be  
marked as favorite.  
The button will illuminate if the same song is  
heard next time.  
Songs marked as favorites will appear in the  
playlist more often.  
To unmark the song as favorite, press while  
the same song is playing.  
Send to Alarm  
To assign the station in general to be used as the  
alarm clock wake sound.  
To create an artist station based on the current  
artist:  
Press and hold while listening. A new artist  
station will be created using the currently playing  
artist.  
The new station will be named using the artist's  
name and the term Radio.  
The newly created artist station will begin  
playback.  
It is also possible to create an artist station by  
pressing and selecting from the tag menu.  
To ban a song in the current station:  
Press while listening. The current song will be  
marked as banned.  
To ban an artist in the current station:  
Press and hold while listening. The current artist  
will be marked as banned.  
To further manage your artist stations,  
unmark the banned songs or banned  
artists, please login your Slacker account  
station management.  
20  
Internet Radio  
With Internet radio, you can listen to music, news,  
sports, weather or talk radio in other countries or  
from your home town. It offers the most music  
selections from around the world and most stations  
are free.  
To store the current station as a preset:  
1. Select a station.  
2. Press and hold 1, 2, 3, 4, 5 or 6 on top of the  
radio until a beep sound is heard to store the  
current station to that preset button.  
You can store up to 6 stations in each genre.  
To listen to a preset station, press 1-6.  
To edit a preset station, repeat the steps above  
to overwrite the previously stored station.  
You can assign a preset station as the wake  
sound of the alarm, refer to page 17 for more  
information.  
Accessing Internet Radio  
Press SOURCE repeatedly to select Internet  
Radio.  
OR  
Press or to highlight Internet Radio in the  
Source menu and then press SELECT.  
Listening to Internet Radio  
To select a station:  
Internet Radio stations are categorized according to  
music genre, talk nature and geographical location.  
1. Press or to highlight a category or sub-  
category and then press SELECT.  
To store the current station as My Favorites:  
Press while listening.  
Alternatively:  
1. Press  
.
INTERNET RADIO  
My Genres  
My Favorites  
Music  
2. Press or to highlight Add to Favorites and  
then press SELECT.  
To listen to a station in My Favorites:  
Select a station from My Favorites in the main  
menu of Internet Radio and then press SELECT to  
start playback. (Read To select a station for more  
information).  
Talk  
My Genres – your favorite genres together in  
one place for easier navigation  
My Favorites – a list of your favorite Internet  
Radio stations  
Music – music stations categorized by genre and  
sub-genres (e.g. Blues, Hip Hop)  
Talk – talk-specified stations categorized by talk  
natures (e.g. Business news, Religion)  
My Local – a list of local Internet radio stations  
selected according to the ZIP code provided by  
the user  
To remove a station from My Favorites:  
Press while listening to a favorite station.  
By Region – music stations categorized by  
geographical regions  
2. While a station is highlighted, press SELECT. The  
selected station will start to play.  
INTERNET RADIO  
Brit Pop  
Maroon 5 - Talking  
2:36  
WMA  
32Kbps  
21  
Internet Radio  
To assign the current station as the wake sound  
of the alarm clock:  
1. Press  
.
2. Press or to highlight Send to Alarm and  
then press SELECT.  
Recording Internet Radio  
Warning! Use of the recording feature is for  
personal use only. (Files can not be transferred or  
moved from the internal memory.)  
To record the current station:  
1. Press to start recording.  
INTERNET RADIO  
Brit Pop  
Maroon 5 - Talking  
2:36  
REC 00:00:34  
2. Press to stop recording.  
Recording will be stored in the internal memory  
of the radio.  
For playback, please refer to Internal Memory  
on page 24.  
The radio names each recording <Station  
Name>_<Month_Date>_<Time Stamp>. For  
example: JazzMan_1_21_445.  
Adding Internet Radio stations  
To add Internet Radio stations:  
login to your user account to add new stations  
under My Favorites.  
22  
FM/AM Tuner  
FM/AM antenna  
Recording FM/AM Radio  
For FM reception, uncoil the FM antenna at the  
back of the radio, ensuring it is fully extended  
(you may even want to tape it to the wall behind  
the radio if possible. The higher the better.)  
For AM reception, connect the AM antenna loop  
to the back of the radio. Rotate the AM loop  
antenna for better reception.  
Warning! Use of the recording feature is for  
personal use only. (Files can not be transferred or  
moved from the internal memory.)  
To record the current station:  
1. Press to start recording.  
FM RADIO  
ST  
Accessing FM/AM Radio  
92.3  
MHz  
Press SOURCE repeatedly to select FM Tuner or  
AM Tuner.  
REC 00:00:34  
OR  
Press or to highlight FM Tuner or AM Tuner  
2. Press to stop recording.  
in the Source menu and then press SELECT.  
FM RADIO  
Recording will be stored in the internal memory  
of the radio.  
For playback, please refer to Internal Memory  
Stereo signal indicator  
ST  
MHz  
on page 24.  
92.3  
The radio names each recording  
<Source><Station Frequency>_<Month_  
Date>_<Time Stamp>.  
For example: FM99.5_1_21_1245.  
Listening to FM/AM Radio  
To select a station:  
1. Press or to adjust the frequency.  
2. Press and hold or until the radio beeps to  
start searching through the frequency range. The  
radio stops searching when it detects the next  
station.  
To store the current station as a preset:  
1. Select a station.  
2. Press and hold 1, 2, 3, 4, 5 or 6 on top of the  
radio until a beep sound is heard to store the  
current station to that preset button.  
To listen to a preset station, press 1-6.  
To edit a preset station, repeat the steps above  
to overwrite the previously stored station.  
You can assign a preset station as the wake  
sound of the alarm, refer to page 17 for more  
information.  
To assign the current station as the wake sound  
of the alarm clock:  
1. Press  
.
2. Press or to highlight Send to Alarm and  
then press SELECT.  
23  
Internal Memory  
The radio's internal memory stores up to 10 hours of Deleting recordings  
recordings from Internet Radio and FM/AM Tuner.  
1. Press or to highlight an unwanted recording  
and then press SELECT.  
Accessing Internal Memory  
2. Press or to highlight Delete and then press  
Press SOURCE repeatedly to select Internal  
Memory.  
SELECT.  
INTERNAL MEMORY  
FM99.5_1_21_124  
OR  
Press or to highlight Internal Memory in  
the Source menu and then press SELECT.  
Play  
Delete  
Listening to recordings  
1. Press or to highlight a recording and then  
press SELECT.  
3. Press or to highlight Yes in the confirmation  
screen and then press SELECT.  
INTERNAL MEMORY  
FM99.5_1_21_124  
AM1070_1_22_355  
JazzMan_1_21_445  
Slkr_Blues_1_16_34  
To delete all recordings:  
1. In the list of recordings, press or to highlight  
Delete All and then press SELECT.  
INTERNAL MEMORY  
FM99.5_1_21_124  
AM1070_1_22_355  
JazzMan_1_21_445  
DELETE ALL  
2. Press or to highlight Play and then press  
SELECT to start playback.  
3. Press to pause or resume playback.  
4. Press to skip to the next recording.  
2. Select Continue in the confirmation screen and  
then press SELECT.  
You can also clear the internal memory from the  
Settings menu. Refer to Advanced Settings on  
page 27 for more information.  
5. Press to skip within the beginning 4 seconds  
of the current recording to skip to the previous  
recording. Otherwise, you will return to the  
beginning of the current recording.  
24  
USB Input  
The radio can play back music files (mp3, wma and  
RealAudio (RA8 and G2) formats) stored on an  
external USB device connected to it. The USB  
connection port is located at the back of the radio.  
Deleting files  
1. Press or to highlight an unwanted file and  
then press SELECT.  
2. Press or to highlight Delete and then press  
SELECT.  
Accessing USB Input mode  
USB INPUT  
01 Song1.mp3  
Press SOURCE repeatedly to select USB Input.  
OR  
Press or to highlight USB Input in the  
Source menu and then press SELECT.  
Play  
Delete  
Listening to music files  
3. Press or to highlight Yes in the confirmation  
1. Press  
,
,
or to browse through the  
screen and then press SELECT.  
directory of the USB device and select a music  
file by pressing SELECT.  
USB INPUT  
01 Song1.mp3  
02 Song2.mp3  
03 Song3.mp3  
04 Song4.mp3  
Press or SELECT to enter a folder.  
Press to exit from a folder.  
2. Press or to highlight Play and then press  
SELECT to start playback.  
3. Press to pause or resume playback.  
4. Press to skip to the next recording.  
5. Press to skip within the beginning 4 seconds  
of the current recording to skip to the previous  
recording. Otherwise, you will return to the  
beginning of the current recording.  
25  
Weather  
Weather broadcast  
Snow  
Your radio includes a complimentary 4  
year weather subscription from  
WeatherBug®  
Heavy snow  
Windy  
Fog  
A digital weather broadcast is available including:  
Text-to-speech reading of weather forecast for  
the ZIP code associated with the radio (can be  
turned on or off in the Settings menu). Audio  
playback will pause during reading.  
On screen display of conditions including  
current temperature, high and low temperatures  
of the day, current weather condition, humidity  
and wind conditions.  
To check the weather of current day:  
Press WEATHER once.  
WEATHER: 46290  
Current: 67(68/51) F  
Partly Cloudy  
Humidity: 50%  
Wind: 7 mph  
Graphical display of weather conditions for 3-day  
forecast:  
Unknown  
To check the 3-day weather forecast:  
Press WEATHER twice to check weather forecast for  
current day and the next two days.  
WEATHER: 46290  
Current: 67  
Sunny/clear  
Mostly sunny  
Partly cloudy  
Mostly cloudy  
Cloudy  
Today  
68/51  
Wed  
70/50  
Thu  
73/52  
To return to the previous audio source or  
playback screen:  
Press WEATHER a third time.  
Clear (night)  
Mostly clear (night)  
Partly cloudy (night)  
Mostly cloudy (night)  
Hazy  
Emergency Broadcast System alert  
When an Emergency Broadcast System alert is  
received, the radio will:  
pause current audio playback,  
sound the alert chirp,  
display the emergency warning text on the  
display,  
use text-to-speech to read the alert  
Hazy (night)  
Rain  
You can select the minimum level of emergency  
alerts to be notified of by the alert chirp or the text-  
to-speech reading in the Settings menu.  
Heavy rain  
Thunderstorms  
Severe thunderstorms  
Sleet  
Frozen mix  
26  
Settings  
Network setup  
Changing radio's settings  
To change the radio settings:  
1. Press to display the Source menu.  
To change the network setting of the radio (wired or  
wireless). Refer to page 11 for more information.  
2. Press or to highlight Settings and then  
Software updates  
press SELECT.  
To check if newer firmware is available. Follow the  
instructions on the display for update.  
3. Press or to highlight a setting and press  
SELECT to enter the sub-menu.  
Weather  
SETTINGS  
To turn on or off the text-to-speech reading  
when you press the WEATHER button.  
Account Info  
Device Info  
Display  
To select the gender and accent (US/UK) for the  
voice used for text-to-speech reading.  
To select the minimum level of emergency alerts  
to be notified of by the alert chirp.  
To select the minimum level of emergency alerts  
to be notified of by the text-to-speech reading.  
Network Setup  
Repeat this step to browse for more settings and  
sub-menus.  
4. To change setting, press or to highlight a  
desirable option and then press SELECT to  
confirm.  
Advanced settings  
Clock Mode: to select between Auto Sync and  
Manual for clock time update. If Auto Sync is  
selected, the clock time will update every 5  
minutes while checking for weather update.  
Format memory: to clear all recordings in the  
internal memory.  
Reset to defaults: to reset menus to factory  
defaults. The following settings will be reset:  
Slacker username  
Slacker password  
Display options  
Language selection  
Zip code entry  
Network connection setup  
Clock  
Alarm  
Weather alert level  
Text-to-speech options  
Demonstration mode  
Recordings in Internal Memory will NOT be  
erased  
SET VOICE TYPE TO:  
Off  
David  
Callie  
Millie  
Account info  
To change the login information (username and  
password) sent by the radio when attempting to  
login to the Slacker service.  
To edit the ZIP code for Slacker, time and  
weather functions.  
If you have changed your account  
information through Slacker's website,  
please also edit the account information  
in this setting. The information here  
must match your Slacker account  
information online.  
Set Language: to change the language of the  
display.  
Device info  
To show the firmware version, MAC address and PIN  
number of the radio. MAC address and PIN are  
necessary to activate your RCA Infinite Radio  
accounts.  
Some menus may require character input,  
refer to page 16 for tips on inputting  
characters.  
Display  
To change brightness and contrast of the display.  
27  
More information  
code as reference for automatic clock time  
update.  
Troubleshooting tips  
The radio cannot be turned on.  
Plug the AC power adapter securely into the  
radio and a wall outlet.  
Check the power outlet by plugging in another  
device.  
Press and hold ON/STANDBY for 10 seconds to  
reboot the unit.  
Weather information and Emergency Broadcast  
System alert are not read out.  
No sound.  
Refer to Weather in the Settings menu and make  
sure you have turned on the text-to-speech  
reading feature.  
Increase the volume setting.  
Make sure the headphones are not plugged in.  
The radio does not respond to key presses.  
The radio connects to the Internet but is unable  
to play a particular station.  
The radio may temporarily cease to function if  
subjected to electrostatic disturbance. To resume  
normal operation, it may be necessary to reset  
the radio by unplugging and reconnecting the  
power or by removing and reinstalling the  
batteries in the base of the radio.  
Check if the station is still broadcasting.  
The station may have reached the maximum  
number of simultaneous listeners.  
The link to the radio station may be out of date.  
The Internet connection between the radio  
station server and the radio may be too slow.  
Cannot connect the radio to Internet.  
Check if your access point is turned on.  
Check if the wireless enabler is securely and  
correctly connected.  
For users of RCA Wi-Fi Enabler: make sure all the  
indicators on the Enabler’s front panel are lit. If  
the WPS, MODE, or WIRELESS indicators are off or  
blinking simultaneously, press and hold the  
Enabler’s WPS button for 3 seconds (the MODE  
LED should start blinking) to rescan your  
network configuration. The Enabler may restart  
multiple times during this process and take up  
to two minutes depending on your network  
configuration. The MODE LED will stop blinking  
when this process is completed. Go to www.  
rcainfiniteradio.com for more information.  
Make sure a firewall is not blocking any outgoing  
ports.  
Make sure the access point does not restrict  
connections to specific MAC addresses.  
Make sure you have entered the correct  
password. Password is case sensitive.  
Your wireless Internet connection may exceed  
the maximum range for reception. Relocate the  
Internet Radio closer to the wireless access point.  
The network settings of the radio may be  
incorrect. Check the network settings in Network  
Setup in the Settings menu.  
Clock time is incorrect.  
Refer to Account Info in the Settings menu and  
make sure you have correctly input your ZIP  
28  
More information  
Cannot play back music files on connected USB  
device.  
Further help on Wi-Fi Enabler (for  
RIR205)  
Make sure USB device is securely connected.  
Digital Right Management (DRM) type music files  
will not be played.  
The RCA Wi-Fi Enabler adds Wi-Fi capability to  
your existing network. Page 9, step 4 shows you  
how to connect the RCA Wi-Fi Enabler to your  
network.  
The radio supports FAT12, 16 and 32 file systems  
only. Other file systems from Linux, MAC or NTFS  
are not supported.  
Your Wi-Fi Enabler comes preconfigured from the  
factory so normally no changes should be  
necessary. This information is provided for the  
more advanced users or for troubleshooting  
purposes.  
The LED of ON/STANDBY button is flashing.  
The LED is flashing (5-second interval) when the  
unit is being powered by the backup batteries  
due to electricity supply interruption. Please  
check your AC power supply.  
If you encounter problems connecting the radio  
to the Internet via RCA Wi-Fi Enabler, the settings  
on the radio may not match the settings on the  
Enabler. Follow the steps below to configure the  
settings again.  
If the LED is flashing even faster (3-second  
interval), this means that the unit is being  
powered by weak backup batteries. Please  
replace the backup batteries (refer to page 9). We  
recommend that you replace the batteries every  
year (or more often in case of multiple power  
outages) to avoid low battery power. Otherwise,  
clock and alarm accuracy may be affected when  
electricity supply is interrupted.  
To find the configuration information of the Wi-Fi  
Enabler:  
Find the Wi-Fi Enabler’s factory configuration  
information on the white label on the back of  
the RCA Infinite Radio. This label includes: 1) the  
Wireless Network’s name (SSID), 2) the Security  
Type, and 3) the password/key.  
Cannot stop the demonstration mode.  
To exit the demonstration, press and release in  
sequence the buttons on top of the radio: preset  
1, then SLEEP/SNOOZE, then preset 6.  
To check if the configuration information is the  
same in the radio:  
1. Press to display the Source menu of the radio.  
Press to highlight Settings and then press  
SELECT.  
My question was not answered here.  
Visit www.rcainfiniteradio.com for an up-to-  
date list of frequently asked questions.  
SOURCE  
AM Tuner  
>
Internal memory >  
USB Input  
Settings  
>
>
2. In the Settings menu, press to highlight  
Network Setup and then press SELECT.  
3. In the Network Setup screen, press to  
highlight Wireless and then press SELECT.  
4. At the warning screen, press SELECT while  
Continue is highlighted in the screen below.  
WARNING  
Current connection  
will be lost.  
Continue  
Cancel  
29  
More information  
5. In the Network Setup screen, press to  
9. The radio should then connect with the Wi-Fi  
Enabler and the Internet. If your AR Infinite  
Radio accounts have not been activated, the  
radio will then display a Server Error message.  
Please press SELECT to continue. You will be  
asked to enter your postal code before the radio  
connects successfully.  
highlight Enter SSID and then press SELECT.  
NETWORK SETUP  
Select a wireless  
setup option:  
Detect Networks  
Enter SSID  
SERVER ERROR  
6. The Network Security screen will be displayed.  
Confirm the SSID of the Wi-Fi Enabler or re-enter  
if necessary. When finished, press to show  
DONE and then press SELECT to continue.  
Unable to retrieve  
account settings  
Enter postal code  
Continue  
NETWORK SECURITY  
Enter network SSID  
ir_641764cc  
If you are still unable to connect with the Wi-Fi  
Enabler, reposition the Enabler and try  
The SSID here is an  
example only.  
connecting again. Refer to the Placement of  
Wi-Fi Enabler on page 14 for more information.  
DONE  
7. The Network Security screen will then show.  
Press to highlight WPA and then press  
SELECT.  
NETWORK SECURITY  
Select type:  
None  
WEP  
WPA  
8. The Enter Password/key screen will be  
displayed. Confirm the password/key of the Wi-Fi  
Enabler or re-enter if necessary. When finished,  
press to show DONE and then press SELECT  
to continue.  
NETWORK SECURITY  
Enter Password/key  
7a617fb2f  
The password/key here  
is an example only.  
DONE  
A connection screen will then show to let you  
know the Network name (SSID) that the radio is  
connecting to.  
30  
More information  
press Enter. The address depends on whether  
the Enabler is configured as a Router or as an  
Access Point (AP) on your system.  
Web-based utility of Wi-Fi Enabler  
This section is provided for advanced users that  
would like to verify their Enabler's configurations  
via the Enabler’s web-based utility.  
5. When the below screen appears, enter admin for  
the User Name and leave the Password field  
blank, and then click OK.  
The utility can be accessed via your web browser  
through the use of a computer connected to  
LAN port of the Wi-Fi Enabler. Refer to page 9,  
step 4 for more information.  
Major pages in the utility and the page’s key  
functions will be described below. For a basic  
network setup, most users will not have to use  
the following screens but this utility may be  
useful, for troubleshooting.  
To access the web-based utility of the Wi-Fi  
Enabler:  
1. Connect the supplied Ethernet cable from the  
Wi-Fi Enabler LAN port to your computer's  
Ethernet port. Refer to page 9, step 4 for more  
informaiton.  
6. The web-based utility's home page will be  
displayed. You can check the SSID and Security  
Type here.  
2. For PC users running Windows XP, click on Start,  
Run, and type cmd in the open dialog box and  
press Enter.  
For Mac users running OSx click on the terminal  
window.  
3. For PC users, at the dos prompt, type ipconfig /  
all. This will show you the IP address for your  
Default gateway (Wi-Fi Enabler).  
For Mac users, in the terminal window, type  
ipconfig getpacket en0.  
A sample of the configuration is shown below:  
Ethernet adapter Local Area Connection:  
7. Click LAN Settings from the left menu to view  
more configurations (such as IP address, Subnet  
Mask, etc.).  
Connection-specific DNS Suffix . :  
Description . . . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit  
Controller #2  
Physical Address. . . . . . . . . .: 00-12-3F-14-C2-0D  
Dhcp Enabled. . . . . . . . . . . . : Yes  
Autoconfiguration Enabled . . . . : Yes  
IP Address. . . . . . . . . . . . . . : 192.168.36.11  
Subnet Mask . . . . . . . . . . . . : 255.255.255.0  
Default Gateway. . . . . . . : 192.168.36.1  
DHCP Server . . . . . . . . . . . .: 192.168.36.1  
DNS Servers . . . . . . . . . . . . : 192.168.36.1  
Lease Obtained . . . . . . . . . : Monday, May 12, 2008 7:05:37 PM  
Lease Expires . . . . . . . . . . . : Thursday, May 15, 2008 7:05:37 PM  
C:\Documents and Settings\Administrator>  
4. Launch your Web browser and enter the Router’s  
Default Gateway address, (in the above  
example: 192.168.36.1 or 192.168.0.1) in the  
Address field that was found above and then  
31  
More information  
10. To view the Wireless Security configuration, click  
8. Click Status from the left menu to view the  
Configure on the Wireless screen.  
current connection status.  
In order for the W-Fi Enabler to communicate  
with the Radio, 1) SSID, 2) Wireless Security Type,  
and 3) Passphrase must match on both the RCA  
Wi-Fi Enabler and the radio.  
The SSID on the Enabler can be found on the  
white label on the side of the Enabler.  
A quick way to check the SSID on the radio: press  
, select Settings, select Network Setup, and  
then select Connection Info.  
CONNECTION INFO:  
Connected  
Type: Wireless  
SSID: ir_9d31893b  
9. Click Wireless from the left menu to view the  
wireless settings. The SSID shows here must  
match the SSID of the radio.  
A quick way to check the SSID on the radio: press  
, select Settings, select Network Setup, and  
then select Connection Info.  
The wireless security type on the Enabler should  
be set to WPA-PSK. This security type must  
match the security type on the radio (WPA). Refer  
to page 29-30 for more information.  
The Passphrase can be found on the white label  
on the side of the Wi-Fi Enabler and it needs to  
match the password/key on the radio. Refer to  
page 29-30 for more information.  
This screen also shows the Wireless channel that  
the Enabler is broadcasting on. The default  
Channel number is set to Auto. In some cases, if  
there are other wireless networks operating in  
near proximity on the same channel, the Auto  
channel mode may not work as expected and  
Auto may need to be changed to another  
channel. In the above example the channel was  
changed from Auto to Channel 6.  
32  
More information  
Copyright warning  
This player is for your personal use only.  
Unauthorized recording or duplication of  
copyrighted material may infringe upon the rights  
of third parties and may be contrary to copyright  
laws.  
Check for updates  
Visit www.rcainfiniteradio.com for the latest news  
and firmware upgrades for our Wi-Fi Internet Radio.  
Technical specification  
Product: Wi-Fi Internet Radio  
Brand: RCA  
Model: RIR200, RIR205  
Electrical Consumption: 13W  
Specifications  
Hardware  
Dimensions: 212 mm H, 94 mm W, 154 mm D  
Unit Weight: 790 g (27.9oz) (without batteries)  
Standards: IEEE 802.11g and 802.11b  
Channels: 11 Wi-Fi Channels (US, Canada)  
Ethernet Port: 10/100 RJ-45 compatible  
Power: External 9.0V, 1.4A  
Battery Backup: 3 X AAA Size Batteries  
Display: 2.7" Backlight LCD  
LEDS: On/Standby, two for navigation keys, Love  
it.  
Internal Memory: 512MB  
Stereo Headphones jack  
USB Connection Jack  
AM Tuner section  
Tuning Range: 520KHz to 1710KHz  
FM Tuner section  
Tuning Range: 87.5MHz to 107.9MHz  
Amplifier section  
Output Power: 2W x 2  
Distortion @ 1KHz: <10% THD  
Speakers  
Number: 2  
Size: 40mm (1.56")  
33  
Warranty information  
Limited warranty  
This Warranty is in lieu of all other express  
warranties or liabilities. ANY IMPLIED WARRANTIES,  
INCLUDING ANY IMPLIED WARRANTY OF  
MERCHANTABILITY, SHALL BE LIMITED TO THE  
DURATION OF THIS WRITTEN WARRANTY. ANY  
ACTION FOR BREACH OF ANY WARRANTY  
12 Month Limited Warranty  
Applies to RCA Audio/Video Products  
AUDIOVOX ELECTRONICS CORP. (the Company)  
warrants to the original retail purchaser of this  
product that should this product or any part thereof, HEREUNDER INCLUDING ANY IMPLIED WARRANTY  
under normal use and conditions, be proven  
defective in material or workmanship within 12  
months from the date of original purchase, such  
defect(s) will be repaired or replaced with  
reconditioned product (at the Company's option)  
without charge for parts and repair labor.  
OF MERCHANTABILITY MUST BE BROUGHT WITHIN A  
PERIOD OF 24 MONTHS FROM DATE OF ORIGINAL  
PURCHASE. IN NO CASE SHALL THE COMPANY BE  
LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL  
DAMAGES FOR BREACH OF THIS OR ANY OTHER  
WARRANTY. No person or representative is  
authorized to assume for the Company any liability  
other than expressed herein in connection with the  
sale of this product.  
To obtain repair or replacement within the terms of  
this Warranty, the product is to be delivered with  
proof of warranty coverage (e.g. dated bill of sale),  
specification of defect(s), transportation prepaid, to  
the Company at the address shown below.  
Some states do not allow limitations on how long an  
implied warranty lasts or the exclusion or limitation  
of incidental or consequential damage so the above  
limitations or exclusions may not apply to you. This  
Warranty gives you specific legal rights and you may  
also have other rights which vary from state to state.  
This Warranty does not extend to the elimination of  
externally generated static or noise, to correction of  
antenna problems, loss/interruptions of broadcast  
or internet service, to costs incurred for installation,  
removal or reinstallation of product, to corruptions  
caused by computer viruses, spyware or other  
malware, to loss of media, files, data or content, or  
to damage to tapes, discs, removable memory  
devices or cards, speakers, accessories, computers,  
computer peripherals, other media players, home  
networks or vehicle electrical systems.  
How to make a warranty claim:  
If your product is capable of storing content  
(such as an mp3 player, digital voice recorder,  
etc), it is recommended to make periodic backup  
copies of content stored on the product. If  
applicable, before shipping a product, make a  
back up copy of content or data stored on the  
device. Also, it is advisable to remove any  
personal content which you would not want  
exposed to others. IT IS LIKELY THAT CONTENTS  
AND DATA ON THE DEVICE WILL BE LOST DURING  
SERVICE AND REFORMATTING. AUDIOVOX  
ACCEPTS NO LIABILITY FOR LOST CONTENT OR  
DATA, OR FOR THE SECURITY OF ANY PERSONAL  
CONTENT OR DATA ON THE RETURNED DEVICE.  
Product will be returned with factory default  
settings, and without any pre-loaded content  
which may have been installed in the originally  
purchased products. Consumer will be  
This Warranty does not apply to any product or part  
thereof which, in the opinion of the Company, has  
suffered or been damaged through alteration,  
improper installation, mishandling, misuse, neglect,  
accident, or by removal or defacement of the factory  
serial number/bar code label(s). THE EXTENT OF THE  
COMPANY'S LIABILITY UNDER THIS WARRANTY IS  
LIMITED TO THE REPAIR OR REPLACEMENT  
PROVIDED ABOVE AND, IN NO EVENT, SHALL THE  
COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE  
PAID BY PURCHASER FOR THE PRODUCT.  
responsible for reloading data and content.  
Consumer will be responsible to restore any  
personal preference settings.  
34  
Warranty information  
Properly pack your unit. Include any remotes,  
memory cards, cables, etc. which were originally  
provided with the product. However DO NOT  
return any removable batteries, even if batteries  
were included with the original purchase. We  
recommend using the original carton and  
packing materials.  
Include evidence of purchase date such as the  
bill of sale. Also print your name and address and  
a description of the defect. Send via standard  
UPS or its equivalent to:  
Audiovox Electronics Corp.  
Attn: Service Department.  
150 Marcus Blvd.  
Hauppauge N.Y. 11788  
1-800-645-4994  
Insure your shipment for loss or damage.  
Audiovox accepts no liability in case of damage  
or loss en route to Audiovox.  
Pay any charges billed to you by the Exchange  
Center for service not covered by the warranty.  
A new or refurbished unit will be shipped to you  
freight prepaid.  
What we will do:  
Provide you with a new, or at our option, a  
refurbished unit. The exchange unit is under  
warranty for the remainder of the original product’s  
warranty period.  
For Canada Customers, please ship to:  
Audiovox Return Centre  
c/o Genco  
6685 Kennedy Road,  
Unit#3, Door 16,  
Mississuaga, Ontario  
L5T 3A5  
35  
Illustrations contained within this publication are for representation only and subject to change.  
The descriptions and characteristics given in this document are given as a general indication and not as a  
guarantee. In order to provide the highest quality product possible, we reserve the right to make any  
improvement or modification without prior notice. The English version serves as the final reference on all  
products and operational details should any discrepancies arise in other languages.  
Audiovox Electronics Corp.  
150 Marcus Blvd, Hauppauge, NY 11788  
1-800-878-5779  
© 2008 Audiovox Electronics Corp.  
Trademark(s) ® Registered  
Marca(s) ® Registrada(s)  
Marque(s) ® Deposée(s)  
v2.0  
36  

Toshiba Protege PT311U0GK02V User Manual
Toshiba MQ01ABD Series Hard Disk Drive MQ01ABD059 User Manual
Sonic Alert SBA475SS User Manual
Seagate Barracuda ST3500320NS User Manual
Samsung Spinpiont M7 M7 User Manual
Samsung SGH E310S User Manual
Samsung SGH D410C User Manual
Samsung DLP TV SP56L6HX User Manual
Philips FM16FD00B User Manual
Oregon Scientific DIGITAL TRAVEL RADIO FREQUENCY (RF) CONTROLLED CLOCK RM822 (UK VERSION RM823) User Manual