Contents
Contents
Contents . . . . . . . . . . . . . . . . . . . . . . . 3
Quick Reference . . . . . . . . . . . . . . . . . . . 4
Important Information. . . . . . . . . . . . . . . . . 5
SAR. . . . . . . . . . . . . . . . . . . . . . . . . . 7
Accessories. . . . . . . . . . . . . . . . . . . . . . 9
Care and Maintenance . . . . . . . . . . . . . . . 11
Getting to Know Your Phone . . . . . . . . . . . . 12
Getting Started . . . . . . . . . . . . . . . . . . . 13
Basic Operation . . . . . . . . . . . . . . . . . . . 17
Phonebook . . . . . . . . . . . . . . . . . . . . . 22
Personalising your Phone. . . . . . . . . . . . . . 31
Phone Security . . . . . . . . . . . . . . . . . . . 36
Applications . . . . . . . . . . . . . . . . . . . . . 38
Infrared . . . . . . . . . . . . . . . . . . . . . . . 43
Messages . . . . . . . . . . . . . . . . . . . . . . 47
Call Information . . . . . . . . . . . . . . . . . . . 61
Advanced Operation . . . . . . . . . . . . . . . . 65
Data Folder . . . . . . . . . . . . . . . . . . . . . 70
Schedule . . . . . . . . . . . . . . . . . . . . . . 76
Games . . . . . . . . . . . . . . . . . . . . . . . 78
WAP Browser . . . . . . . . . . . . . . . . . . . . 79
Deactivating the Browser . . . . . . . . . . . . . . 83
Camera Operation . . . . . . . . . . . . . . . . . 84
Additional Features . . . . . . . . . . . . . . . . . 88
Text Entry . . . . . . . . . . . . . . . . . . . . . . 92
Troubleshooting . . . . . . . . . . . . . . . . . . . 94
Glossary of Terms. . . . . . . . . . . . . . . . . . 98
Specifications . . . . . . . . . . . . . . . . . . . 100
EU Warranty . . . . . . . . . . . . . . . . . . . . 101
Personal Settings . . . . . . . . . . . . . . . . . 107
Menu Structure . . . . . . . . . . . . . . . . . . 108
Licencing. . . . . . . . . . . . . . . . . . . . . . 109
Notes. . . . . . . . . . . . . . . . . . . . . . . . 110
Index . . . . . . . . . . . . . . . . . . . . . . . . 111
3
Quick Reference
“Press (F) to select”.
Answer a call or call a dialled number.
Direction which the user can move around
the display screen using the Navigation key.
To end a call or return to Idle screen or F
+Hold to switch the phone on or off.
Secondary Softkey.
Negative soft key/Back-key.
Switches Quiet Mode on and off.
Indicates that a function is Network and/or
third party service dependent.
R
-
Numeric key pads.
Menu
Representation of screen menu option.
4
Important Information
Important Information
Thank you for purchasing this Panasonic digital cellular phone. This phone is designed to operate on GSM networks - GSM900,
GSM1800 and GSM1900. It also supports GPRS for packet data connections. Please ensure the battery is fully charged before
use.
We, Matsushita Mobile Communications Development of Europe Ltd, declare, that the EB-GD87 conforms with the essential and
other relevant requirements of the directive 1999/5/EC.
A declaration of conformity to this effect can be found at http://www.panasonicmobile.com
Safety Considerations
The following information should be read and understood as it provides details which will enable you to operate your phone in a
manner which is both safe to you and your environment, and conforms to any legal requirements regarding the use of cellular
phones.
This equipment should only be charged with
approved charging equipment to ensure
optimum performance and avoid damage to
your phone. Other usage will invalidate any
approval given to this apparatus and may be
dangerous. Ensure the voltage rating of the
Fast Travel Charger is compatible with the area
of use when travelling abroad.
Switch off your cellular phone when in an
aircraft. The use of cellular phones in an
aircraft may be dangerous to the operation of
the aircraft, disrupt the cellular network and
may be illegal. Failure to observe this
instruction may lead to the suspension or
denial of cellular phone services to the
offender, or legal action or both.
A Fast Travel Charger (EB-CAD95xx*) is
supplied with the Main Kit. Other
recommended equipment for charging -Car
Charger (EB-CDD95).
Do not incinerate or dispose of the battery as
ordinary rubbish. The battery must be disposed
of in accordance with local legislation and may
be recycled.
Note* xx identifies the Charger region, e.g.
CN, EU, HK, UK.
5
Important Information
It is advised not to use the equipment at a
For most efficient use hold the phone as you
would any normal phone. To avoid
refuelling point. Users are reminded to observe
restrictions on the use of radio equipment in
fuel depots, chemical plants or where blasting
operations are in progress. Never expose the
battery to extreme temperatures (in excess of
60°C).
deterioration of signal quality or antenna
performance, do not touch or “cup” the antenna
area while the phone is switched on. (See
‘SAR Statement’). Unauthorised modifications
or attachments may damage the phone and
violate applicable regulations. The use of an
unapproved modification or attachment may
result in the invalidation of your guarantee –
this does not affect your statutory rights.
It is imperative that the driver exercises proper
control of the vehicle at all times. Do not hold a
phone while you are driving; find a safe place
to stop first. Do not speak into a Handsfree
microphone if it will take your mind off the road.
Always acquaint yourself thoroughly with
restrictions concerning the use of cellular
phones within the area you are driving and
observe them at all times.
This Panasonic mobile phone is designed,
manufactured and tested to ensure that it
complies with the specifications covering RF
exposure guidelines applicable at the time of
manufacture, in accordance with EU, USA
FCC, and Australian ACA regulations; or as
specifically stated in the separate declaration
leaflet enclosed with this product.
Care must be taken when using the phone in
close proximity to personal medical devices,
such as pacemakers and hearing aids.
Please refer to our website for latest
information/standards compliance in your
country/region of use.
http://www.panasonicmobile.com
6
SAR
SAR
European union - RTTE
THIS PANASONIC PHONE (MODEL EB-GD87) MEETS THE EU REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio
frequency (RF) energy recommended by The Council of the European Union. These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the general population. The guidelines were developed by independent scientific
organisations through periodic and thorough evaluation of scientific studies. The limits include a substantial safety margin designed
to assure the safety of all persons, regardless of age and health.
The exposure standard for mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The
SAR limit recommended by The Council of the European Union is 2.0 W/kg.* Tests for SAR have been conducted using standard
operating positions with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum
value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a base station antenna, the lower the power output.
Before a phone model is available for sale to the public, compliance with the European R&TTE directive must be shown. This
directive includes as one essential requirement the protection of the health and the safety for the user and any other person. The
SAR value for this model phone, when tested for use at the ear, for compliance against the standard was 0.633 W/kg. While there
may be differences between the SAR levels of various phones and at various positions, they all meet the EU requirements for RF
exposure.
* The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/kg) averaged over ten grams of tissue. The limit
incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in
measurements. SAR values may vary depending on national reporting requirements and the network band.
For SAR information in other regions please look under product information at
http://www.panasonicmobile.com/health.html
7
SAR
European union - RTTE
THIS PANASONIC PHONE (MODEL EB-GD87) MEETS THE EU REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio
frequency (RF) energy recommended by The Council of the European Union. These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the general population. The guidelines were developed by independent scientific
organisations through periodic and thorough evaluation of scientific studies. The limits include a substantial safety margin designed
to assure the safety of all persons, regardless of age and health.
The exposure standard for mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The
SAR limit recommended by The Council of the European Union is 2.0 W/kg.* Tests for SAR have been conducted using standard
operating positions with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum
value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a base station antenna, the lower the power output.
Before a phone model is available for sale to the public, compliance with the European R&TTE directive must be shown. This
directive includes as one essential requirement the protection of the health and the safety for the user and any other person. The
SAR value for this model phone, when tested for use at the ear, for compliance against the standard was 0.633 W/kg. While there
may be differences between the SAR levels of various phones and at various positions, they all meet the EU requirements for RF
exposure.
* The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/kg) averaged over ten grams of tissue. The limit
incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in
measurements. SAR values may vary depending on national reporting requirements and the network band.
For SAR information in other regions please look under product information at http://www.panasonicmobile.com/health.html
8
Accessories
Accessories
Personal
Car
Carry Case (EB-YKD87)
Car Charger (EB-CDD95)
This attractive hip case protects your phone
Top up your battery in your vehicle by attaching
and by using the belt clip keeps it close at
hand.
this accessory to your phone and to the
cigarette lighter socket.
Li-Ion Battery (EB-BSD87)
Car Holder (EB-KAD87)
Double your talk time by having a spare
battery.
This compact Car Holder can be mounted in
your vehicle, providing a convenient and
attractive means of storing your phone.
Personal Handsfree (EB-EMD87)
Handsfree Car Kit (EB-HFD87Z)
Talk and move while keeping your hands free
by using this accessory. Just place the
earpiece in your ear and the adaptor in the side
of the handset - and talk.
Drive safely - install a Handsfree car kit and
remove the need to hold your phone while
driving.
9
Accessories
Office
Fast Travel Charger (EB-CAD95UK)
Charge Data Cable (EB-RSD67)
This Charge Data Cable is used to connect
Carry a lightweight portable charger wherever
you go to ensure you always have power to
talk.
your phone to a PC, allowing data
communication between them. This should be
used in conjunction with the Free Panasonic
Data Connection Assistant Software.
The software can be downloaded from:
http://www.panasonicmobile.com/support/software
Fast Travel Charger (EB-CAD95EU)
How to Identify a Genuine Panasonic
Accessory
Panasonic produces some of the most advanced mobile
phones available. So, as you’d expect from this class leader,
the range of accessories are second to none.
Most genuine Panasonic accessories will have a label showing
an “EB-XXX00” model number.
10
Care and Maintenance
Care and Maintenance
Pressing any of the keys may produce a loud tone.
Avoid holding the phone close to the ear while
pressing the keys.
Keep metallic items that may accidentally touch the
terminals away from the equipment.
Extreme temperatures may have a temporary effect
on the operation of your phone. This is normal and
does not indicate a fault.
Always charge the battery in a well ventilated area,
not in direct sunlight, between +5°C and +35°C. It is
not possible to recharge the battery if it is outside
this temperature range.
Do not modify or disassemble the equipment. There
are no user serviceable parts.
When connecting the phone to an external source,
read the operating instructions of the equipment for
the correct connection and safety precautions.
Ensure the phone is compatible with the product it is
being connected to.
Do not subject the equipment to excessive vibration
or shock.
Avoid contact with liquids. If the equipment becomes
wet immediately remove the power and contact your
dealer.
When disposing of any packing materials or old
equipment check with your local authorities for
information on recycling.
Do not leave the equipment in direct sunlight or a
humid, dusty or hot area.
11
Getting to Know Your Phone
Earpiece
Main Display
Navigation Key
Camera Lens
Self Portrait
Mirror
Left Softkey
Sub Display
Headset
Connector
Call Key
Voice Memo Key /
Camera Shutter
Key
Right Softkey
Power / End /
Back Key
IrDA (Infrared)
Charging Indicator
Keypad
Microphone
Accessory Connector
12
Getting Started
Getting Started
Some services detailed, are network dependent or may only be available on a subscription basis. Some functions are SIM
dependent. For more information contact your service provider.
Fitting, and Removing the SIM
Fitting, and Removing the Battery
The SIM is inserted into the back of the phone underneath the
battery.
Before removing the battery, ensure that the phone is switched
off and the charger disconnected from the phone.
Fitting the SIM
Fitting the Battery
Removing the SIM
Removing the Battery
13
Getting Started
Charging the Battery
Operation of Battery Level Indicator
Connecting, and disconnecting the Fast Travel
Charger
While charging
Charging complete
The battery must be fitted in the phone before the charger is
connected. Insert the connector into the base of the phone,
ensuring the arrows on the connector face to the front of the
phone.
Phone on
Phone off
G
.
Battery Charge
Indicator off
.
Note: DO NOT force the connector as this may damage the
phone and/or the charger.
Low Battery Warning
Connect the charger to the AC outlet. When the phone is
charging, the charging indicator will light and a flashing plug
icon will appear in the main display and in the sub display.
When the battery power is low, a warning tone will sound, and a
flashing LOW BATTERY message will be displayed. If this
occurs during conversation, finish your call immediately. The
power will automatically shut off after the warning tone. Fully
recharge the battery. See “Charging the Battery”. (Calls can be
made and received while the phone is charging).
When charging is complete turn off the mains power supply and
disconnect the charger.
14
Getting Started
Menu System
Y
is displayed when you are registered to a non-home
network - Roaming
Display Icons
t
Indicates Call divert is enabled
Indicates Vibration Alert is enabled
Indicates All tones or ring volume is off
After some operations, the display will automatically clear after
three seconds or after pressing any key.
]
[
Status Icons
N Indicates a new message has been received. An
exclamation mark (!) on the left of the message icon
indicates the message store is full.
The status icons are displayed according to the currently
activated functions. The Antenna, Signal and Battery icons are
displayed when the handset is switched on and connected to a
network.
O Indicates Phone lock is on
Status Icons
S
T
q
Indicates it is possible to make emergency calls only
GSM signal strength: \ - weak signal, T - strong signal
GPRS service available
Main
Display
Indicates Battery level:
battery
- full, G (flashing) - low
G
G
Information
Area
?
Indicates Alarm is set
Left Hand
Selection
area
Right Hand
Selection
area
> Indicates current Phonebook entry is from the Mobile
Phonebook
< Indicates current Phonebook entry is from the SIM
Primary Selection Area
Phonebook
15
Getting Started
Using the Menu System
Shortcuts
The menu system provides the means for accessing all the
functions which do not have their own dedicated buttons on the
keypad.
When familiar with the menu system, use the keypad to enter
the Menu Number instead of navigating through the display
menus. For example, to browse the Data Folder function:
Key
Examples of function
From Idle mode:
Access the Menu system
Display a sub-menu
Confirm a selection
Information
Navigate around a menu
Select an option
Icons indicate the current top level menu, the sub-menu
number, text entry mode, Phonebook source, Phonebook
location number, or the alarm set icon depending on the current
mode of operation.
Access the Phonebook
Switch between text entry types
? indicates alarm is set
> indicates current Phonebook entry is from the Mobile
Cancel the current operation and
return to the previous menu
Phonebook
< indicates current Phonebook entry is from the SIM
Phonebook
16
Basic Operation
Basic Operation
New to GD87 is the introduction of the “Pick List”, which is
used extensively throughout the phone.
International Dialling
Using the automatic international access code (+) you will be
able to dial international numbers without having to know the
code for the international exchange.
Select
option
If the international number is known then it can be entered in
the normal fashion followed by the area code and phone
number.
Switching the Phone On/Off
From Idle mode:
Press and hold
Press and hold
until + is
displayed
Select
abbreviated
international
number
When the phone is switched on a greeting will be displayed and
then the phone will go into Idle mode.
Making Calls
Enter area code and
phone number
Ensure that the phone is switched on, the network operator logo
is displayed and the signal strength icon shows network
coverage is available in the current area.
Note: Many countries / regions include an initial “0” in the area
code. This should, in most cases, be omitted when dialling
international numbers. If you have difficulties making
international calls, contact your service provider.
Enter area code and phone number
17
Basic Operation
To stop redialling:
Emergency Calls
When Cancel or C is displayed:
To make an emergency call the antenna symbol (S) must be
present.
If a SIM is installed
Enter 112
Ending Calls
If a SIM is not installed
Automatic Redial
If a connection is unsuccessful
When OK is displayed:
18
Basic Operation
Answering a Call
Earpiece Volume
Select the required volume level
To receive a call the phone must be switched on and the signal
strength icon must be displayed.
To answer a call:
Note: Volume control for the Personal Handsfree accessory is
adjusted in the same manner.
Press any key except
Phone Lock
Phone Lock restricts use to answering incoming calls and
making emergency calls.
The Phone Lock Code is preset to “0000”.
To reject a call:
From Idle mode:
Phone Option
Security >
Phone Lock >
On / Off
On or
Off
Note: If a call is not answered, or is rejected, the number of
incoming calls missed will be displayed. Press any key to clear
the display
Caller ID
The caller’s phone number, and name if stored in Phonebook,
will be displayed during an incoming call.
Enter the
4-digit code
The lock icon will
be displayed
Note: Caller ID may not always be available.
19
Basic Operation
Unlocking the Phone
Enter the 4-digit code
Using the PIN
The PIN protects your SIM against unauthorised use. If you
enable the PIN, every time the phone is turned on you will be
prompted to enter the PIN.
The PIN2 controls security for the Fixed Dial Store, Call Charge
metering and Barred Dial.
When the correct code has been entered Ok will appear in the
primary selection area.
If either PIN/PIN2 is entered incorrectly 3 times the phone will
be locked and the user will need to enter the PUK/PUK2 code.
Contact your service provider for the PUK/PUK2 code.
Note: If the PUK/PUK2 code is entered incorrectly 10 times, the
phone will cease to operate permanently. All information stored
in the SIM will be lost and the SIM will need to be replaced.
Contact your service provider for more details.
Note: When you turn the phone off and on again the Lock Code
will need to be re-entered.
Turning the Phone Lock off
Enabling/Disabling the PIN
The phone must be unlocked before the phone lock can be
turned off.
Phone Option
> Security >
PIN
From Idle mode:
Phone Option >
Security >
Phone Lock
Select
Select Enable/
Disable
On or Off
Enable or
Disable
Select Off
Enter the 4-digit code
Enter PIN
(4 ~ 8 digits)
20
Basic Operation
Setting Quiet Mode
Setting Ring and Key Volume
When required, the phone can be set to vibrate when a call is
received. You can choose between Continuous, Intermittent
or Disabled vibration alerts or a user defined ring volume when
a call is received.
Personalise >
Sounds
Select
Ring Volume
or Key
Volume
From Idle mode:
Adjust the
volume level
Personalise >
Quiet Mode
Setting the Key Tone Type
Select Ring
Volume or
Vibration
Select
required
setting
Personalise >
Sounds >
Key Tone
Select
required
tone
Note: If you increase the ring volume above maximum it will set
an escalating ringtone. If you turn the ring volume off, the silent
indicator icon ([) will be displayed.
21
Phonebook
Phone numbers can be stored in two locations:
SIM Phonebook, where the number of locations, length of name and numbers are SIM dependent.
Ø
Mobile Phonebook, where phonebook entries can be grouped together and additional data can be stored with numbers.
This Phonebook is retained if you change the SIM.
Ø
Note: see ‘Text Entry’ section for descriptions of the different text entry methods available for making Phonebook entries.
Storing a number in the SIM Phonebook
From Idle mode:
Enter the
name
Phonebook >
Create > SIM
Phonebook
Select the
Name Icon
x 2
Enter phone
number
Specify
location?
Select the Phone
Number Icon
Enter location
number
Yes
x 2
No
Entry will go in next
available location
Note: If you amend an entry in the phonebook that has a Voice Dial Command assigned to it, you will need to delete and reassign
that Voice Dial Command (See “Using Voice Commands”).
22
Phonebook
Storing a number in the Mobile Phonebook
Adding Ringtones
Select
Ringtone
icon
Select Fixed Data,
Data Folder or Default
(see ‘Changing the Ring
Tone’)
From Idle mode:
Phonebook >
Create > Mobile
Phonebook
Select the
Name Icon
Adding Pictures
Select
Image to
display
Select Camera
Folder
Select
Camera
icon
Select the
Phone
Enter the
name
x 2
x 2
Number Icon
Adding LCD Colours
Select
Rainbow
icon
Select
Colour
Enter phone
number
Select an
icon
Saving a Phonebook Entry
You can add additional information to each phonebook entry
such as additional telephone numbers, e-mail address,
ringtone, picture, group, notes and LCD colour.
Select Any
Location
Adding E-Mail Addresses and Telephone Numbers
Note: If you amend an entry in the phonebook that has a Voice
Dial Command assigned to it, you will need to delete and
reassign that Voice Dial Command (See ‘Using Voice
Commands’).
Enter
text
Select
icon
Select E-Mail
or
Telephone
You can store up to 3 telephone numbers and 2 E-Mail
addresses for each phonebook entry.
23
Phonebook
Overwrite Protection
Retrieving a Number
If a location is already occupied you will be prompted to confirm
the overwriting of the current information.
From Idle mode:
Select required
phone number or
name
To dial the
selected
number
To overwrite
To choose an
alternative location
Speed Dialling a number stored in the SIM Phonebook
From Idle mode:
Browsing the Phonebook
Enter location number
You can search the Phonebook by either Name or Location.
The default setting for browsing is by name. When browsing by
name pressing a lettered key will take you to the first entry
starting with that letter.
From Idle mode:
Phonebook >
Browse
By Name
OR
By Location
Note:
The Phonebook you last viewed will be the default when you
next press the Phonebook access key.
To change the default, use the Phonebook menu to select the
required Phonebook.
Select required
Phonebook
Select required
name or
Enter location
number
24
Phonebook
Editing Phonebook Entries
It is possible to Detail, View, Recall, Edit, Delete or Create information in the Phonebook. To access any of these functions follow
the same procedure for each one.
With a phone number or name displayed:
View
Displays an individual name and phone number in the names
list.
Select required phone
number or name
Recall
Displays the phone number, allowing you to call it or change it.
Detail
Displays each element of the selected Phonebook entry.
Edit
Displays the entry allowing you to make changes as required.
Select the next or previous
element of the entry
Delete
Deletes the entry from the Phonebook.
Each element may be edited:
Create
Select Edit and edit as
required
Creates a new entry in the Phonebook.
x 2
25
Phonebook
Grouping Phonebook Entries
The ability to group phonebook entries together is an extra function of the Mobile Phonebook.
Retrieving a Number from a Group
Retitling Group Names
Groups are used to collect together types of Phonebook entries,
e.g. business and personal. Each group can be suitably titled
for quick access to the entries contained within.
From Idle mode:
Phonebook >
Group Setting
Select
group
An alert profile can be attributed to groups, or a phone number,
thus allowing incoming calls to indicate the type of caller. See
“Alert Profiles”.
From Idle mode:
Select Edit
Clear the current title
and re-enter - see
“Text Entry”
Phonebook >
Group Setting
Select
group
Select OK
Select
entry
requir
ed
x 2
Select
View
26
Phonebook
Alert Profiles
Hot Key Phone Numbers
Alert Profile allows you to identify callers with a particular
ringtone or display picture/animation, making it easier to
distinguish between callers or groups of callers.
Phone numbers from the Phonebook or Service Dial part of the
Phonebook can be dialled quickly.
Press and hold a Digit
key (1~9)
Creating an Alert Profile
Phone book >
Alert Profile
Select
x 2
Personal or
Group
Note: In some instances, a long press on the 9key will
initiate the games menu
Select an entry from
the phone book
Setting the Hot Key Dial Source
Recall
From Idle mode:
Phonebook >
Hot Key Dial
Select Fixed Data or
Data Folder
x 3
Select SIM Phonebook
or Mobile Phonebook
Select required fixed data or file
from data folder
27
Phonebook
Info Numbers or Service Dial
Using Voice Commands
Some special numbers may be programmed into your SIM
Before any of the phone’s voice activated functions can be
used, it is necessary to configure the phone so that it will
recognise a particular voice and intonation.
(R). It is not possible to modify these.
and hold
Browse through the
Service Dial List
Voice Dial Entry Setup
Phonebook >
Voice
Command >
x 2
Note: The selected phone number can be recalled or dialled.
Voice Dial
Select
Recall
Hold phone
20cm away
from your
mouth
Select
entry to
have voice
command
Review the Phonebook
The Review function in the Phonebook menu shows how many
locations are available in the Phonebook.
Phonebook >
Review
Speak clearly to
record the required
name
When promoted
speak clearly to
repeat the
recording of the
required name
Select SIM
Phonebook or Mob.
Phonebook
A summary of the
selected Phonebook
will be displayed
When recording has finished, the display will indicate if it has
been successful or not. If unsuccessful, repeat as necessary.
Note: Each recording is short in length, so be ready to speak
soon after initiating the recording.
28
Phonebook
Recalling Voice Dial Entries
Editing the Voice Dial Entries
From Idle mode:
From Idle mode:
and Hold
Say clearly which
name to recall
Phonebook >
Voice Command >
Voice Dial
Select required option
and edit as required
Dialling Voice Dial Entries
Using Permission
Add
Allows voice recalled entries to be dialled automatically.
From Idle mode:
To add a new Voice Dial entry.
Play
Phonebook >
Voice Command >
Permission
Select On or
Off
To listen to the recording of a Voice Dial entry.
Delete
Repeat to disable the Permission function returning to Voice
Dial recall only.
To delete an entry.
29
Phonebook
My Profiles
My Profiles is a convenient part of Phonebook where voice, fax and data phone numbers can be stored and viewed.
Adding Numbers
Viewing Stored Numbers
From Idle mode:
From Idle mode:
Phonebook >
My Profile
Phonebook >
Select
Create
x 3
My Profile
x 2
If necessary cycle through
listed numbers
No
*Using T9®
text input?
Enter the name
(See Text Entry)
x 2
x 2
Yes
* Using T9® predictive text input dramatically reduces the number of key
presses required. See ‘Text Entry’.
Enter location number
OR
Select Any
Enter the
Phone
Number
x 2
30
Personalising your Phone
Personalising your Phone
Adding a Start-up Greeting
Changing the Wallpaper
A personalised greeting can be programmed for when the
phone is switched on.
A personal picture (wallpaper) can be displayed when the
phone is in Idle mode.
From Idle mode:
From Idle mode:
Personalise >
Display Settings
> Power On
Setting >
Enter
Personalise >
Display Settings
> Wallpaper
Select
greeting
(See ‘Text
Entry’)
Fixed Data
or Data
Folder
x 2
Greeting
Displaying Animations
If Data Folder
is selected,
select the
required
Preview an
image
Select an image
Animations can be displayed during the phone power on and off
sequences.
From Idle mode:
folder.
Personalise >
Select On or
Off
Note: Pictures are normally stored in the following folders:
Camera, Mail (E-mail or MMS), Received (IrDA or data
connection), Browser or User (optional stored locations).For
creating and saving pictures for use as wallpaper, see ‘Camera
Operation’.
Display Settings >
Power On Setting
> Animation
31
Personalising your Phone
Changing the Ringtone
Composing a Melody
The ringtone of the phone can be changed to one of many
pre-defined sounds, or a downloaded ringtone. All voice, fax,
data and messages can have a different ringtone.
From Idle mode:
Personalise >
Sounds >
Melody Composer
Create
To change the Ringtone
From Idle mode:
Using the table as a reference, enter the notes (from the choice
of Low, - High), rests, and the durations of each, to generate
your composition.
Personalise >
Sounds >
Ring Type
Select
call type
When the composition is complete:
Enter filename
Select Fixed
Data or Data
Folder
Select required
Fixed Data or
required file
from Data
x 2
x 2
Folder
Note: At any time during composing:
Note: See ‘Composing a Melody’ to generate a custom
To play back the current melody
ringtone.
32
Personalising your Phone
Editing your Melody
Key 1st press 2nd press 3rd press 4th press 5th press
C2
D2
E2
F2
G2
A2
B2
C3
D3
E3
F3
G3
A3
B3
C4
D4
E4
F4
G4
A4
B4
C1
D1
E1
F1
G1
A1
B1
Once the ringtone has been saved:
1
2
3
4
5
6
7
8
9
0
*
#
Personalise >
Sounds >
Melody Composer
Edit
Sound
Select required
Melody
Use the relevant keys to insert new notes/rests
Download Melody
Melodies may be downloaded from the Internet, details of this
service are available on our website:
http://www.panasonicbox.com
Rest
1/8
When a message has been received containing a melody:
Select
1/4
1/2
1/1
1/6
Message
location
x 2
Sharp
The ringtone is now stored and can be selected as a
pre-defined melody.
Note: Downloaded melodies will be stored in the data folder
33
Personalising your Phone
Download Logo
Setting the Backlight Time
Logos may be downloaded from the Internet, details of this
service are available on our website:
http://www.panasonicbox.com
From Idle mode:
Personalise >
Display
Settings >
Cycle through
available
times
When a message has been received containing a Logo:
Backlight Time
Select picture location
x 2
To select desired time
The Logo is now stored and can be selected as Wall Paper
from the Personalise menu or as a picture for the Alert Profile
set up.
Changing the Language
Disabling/Enabling all Tones
From Idle mode:
It is possible to change the language that the phone uses for
either display messages and/or text entry.(R)
Personalise >
Sounds >
All Tones
Select Off
or On
From Idle mode:
Personalise >
Language
Select Display
Language OR
Tegic Language
(text entry)
Select
language
When Idle is resumed the silent indicator icon ([) will be
displayed
34
Personalising your Phone
Restoring the Default Phone Settings
Any personal settings can be returned to their factory default,
with the exception of some features, such as the Phone Lock
code and the Language.
From Idle mode:
Personalise >
x 2
Defaults
35
Phone Security
This phone has security options to stop unauthorised use and to limit access to some features. We recommend you memorise your
security codes. If you write them down, don’t write them in a way that someone else could recognise.
If you forget your codes, contact your dealer for the Phone Lock Code and your service provider for the PIN and PIN2.
Key Guard
Changing the security codes
Key Guard stops the keys from performing their normal function
if accidentally pressed. When a call is received, Key Guard is
temporarily disabled, press any key to answer the call.
Use the following to change Phone Lock, PIN or PIN2:
From Idle mode:
Phone Option
> Security
Phone Lock /
PIN / PIN2
Enabling Key Guard
Personalise >
Key Guard
x 2
Enter the current code, press:
Enter the new code, press:
Verify the new code, press:
Select
Change
Restricting Calls
Disabling Key Guard
Barred Dial
x 2
Stops all phone numbers pre-programmed in the SIM from
being dialled. To use this function the PIN2 code is required.
From Idle mode:
Note: Emergency calls can still be made with Key Guard
enabled but there will be no indication that you are dialling a
number.
Phone Option >
Enter PIN2
Security >
Barred Dial >
Enable
36
Phone Security
Call Barring
Fixed Dial
Call Barring restricts certain outgoing and/or incoming calls
using a password supplied by your service provider. When
updating/checking the status of Call Bar the phone must be
registered with a network. Varying call restrictions can be used
for voice, fax and data calls.
Fixed Dial is part of the Phonebook, but with added security.
When Fixed Dial is enabled:
Only numbers that are in the Fixed Dial Store may be
dialled.
Ø
Ø
Ø
Any manually dialled phone numbers must match a number
already in the Fixed Dial Store.
From Idle mode:
A phone number may be stored, edited or deleted. You will
be prompted for your PIN2 code.
Phone Option >
Security >
Call Bar
Bar Voice /
Bar Fax
/
Bar Data
“Wild” Numbers
Enter
Select
level
Password
Wild numbers are spaces that can be stored in a phone
number. The wild numbers must be filled before the phone
number is dialled. Used in conjunction with Fixed Dial, calls can
be restricted, for example, to a specific area by storing the area
code of a phone and when recalled the remainder can be
added. The wild numbers can be anywhere within a stored
phone number.
x 2
Press and hold until
__ is displayed
When the phone number
is recalled, enter the wild
number
37
Applications
Clock
This phone incorporates a clock with date/time, an alarm and a power on/off feature.
A second clock for dual time is also included - see ‘Second Clock’.
Initially Setting the Home Time
Setting the Clock Format
From Idle mode:
From Idle mode:
Applications >
Clock Function >
Clock Set >
Home >
Applications >
Clock Function >
Clock Format >
Display Format
Time Set
Enter date
(day/month/year)
Enter time (use
24 hour clock)
Select clock/date format
38
Applications
Altering the Time/Date
Setting the Alarm
From Idle mode:
If the clock hasn’t been set, the user will be prompted to do so
prior to setting the alarm.
There are four separate alarms, each of which may be set
independently.
From Idle mode:
Applications >
Clock Function >
Clock Set >
Home >
Press and
hold
Applications >
Clock Function >
Alarm Set
Time Set
Select alarm
to be set
Enter time
Enter date
(day/month/year)
(use 24 hour
clock)
Press and
hold
Enter time
Select alarm
frequency
Setting the Clock for Summer Time
x 2
From Idle mode:
Applications >
Select
frequency
required
Clock Function >
Clock Set >
Home >Summer Time
Select On
or Off
Select ring
type
Select Fixed Data
or Data Folder
Select
required alert
39
Applications
When the alarm has been set, an alarm clock will be displayed
when the phone is in Idle.
The alarm is activated based on the current clock (Home or
Second).
Muting the Alarm
When disabled, following the same procedure will re-enable the
alarm.
When the set time is reached the alarm will sound and the
display will flash with an alarm message. The alarm will sound
for 30 seconds. If the alarm is due during a call, it will activate
vibration alert.
Adjusting the Alarm Time
From Idle mode:
Applications >
Clock Function >
Alarm Set
To end the alarm:
Press any key
Select alarm
to adjust
Disabling the Alarm
From Idle mode:
Enter time
Press and hold
x 2
Applications >
Clock Function >
Alarm Set
Select alarm to
disable
Select
frequency
required
Select ring
type
Select alarm
frequency
Select
frequency
Select
Disabled
Select Fixed
Select
Data or Data
Folder
required
sound
40
Applications
Setting a Power On/Off Time
Calculator
The phone can be set to turn itself on or off automatically at a
specified time using the Power On/Off feature. Setting/adjusting
the Power On/Off automatically is similar to setting the time on
the clock. Select Power On Time or Power Off Time in the
Clock Function menu.
The four function calculator will enable the user to perform
simple arithmetic calculations (addition / subtraction /
multiplication and division).
From Idle mode:
Applications >
Calculator
Enter number
(max. 10 digits)
From Idle mode:
Applications > Clock Function > Power On
Time or Power Off Time
Complete a further
sum?
Enter number
(max. 10 digits)
Select arithmetic
operation
Yes
Select
Frequency
Enter time (use 24
hour clock)
No
Select next
arithmetic
operation
Intermediate
sum result
shown
Press to
complete
the sum
Caution: Ensure that the setting of the Alarm or Power On
function will not automatically power on when in an aircraft or
medical facility etc. - see ‘Important Information’.
Press and hold to add a decimal point
For arithmetic operations:
To
To
To
To
multiply
add
divide
subtract
41
Applications
Currency Convertor
The conversion rate will be retained in the phone once entered.
The next time the convertor is used, the conversion rate /
currency abbreviation can be edited while in the Currency/rate
display.
The currency convertor enables the user to convert from/to a
home currency using a conversion rate that you enter.
From Idle mode:
Select Edit
Entering an Initial Conversion Rate
Applications >
Unit Converter
Converting a Value
Confirm conversion
rate is correct
Enter value to
convert
Enter abbreviation for the home
currency (max. 3 characters)
x 2
x 2
x 2
Swapping the Currency Conversion
When you have accepted the conversion rate and are ready to
enter the value to be converted, you can swap the currencies to
convert from the foreign currency into the home currency.
Enter abbreviation for the foreign
currency (max. 3 characters)
Enter currency
conversion rate
x 2
Enter value to
convert
Select Swap
x 2
x 2
42
Infrared
Infrared
By using infrared connection with another GD87 or with other devices with an infrared port, you can transfer data between the
devices. Also it enables you to use GSM fax and data services, and it provides access to Internet and e-mail, through existing
applications.
Preparing for Infrared Connection
Press to stop the transmission at any time
Place GD87 and another device with an infrared port within
the effective range of infrared connection with each other.
Ø
There must be no obstruction between the two
communicating devices.
Ø
Sending Images and Music Data
Images and Music data can be transferred among GD87s.
From Idle mode:
The infrared ports of both devices must point at each other.
Ø
Ø
If you use a PC, you need to set up infrared connection on
the PC.
(Example: Start > Settings > Control Panel > Infrared >
Options tab > Enable Infrared Communication)
Select Personalise >
Select the
data to send
Data Folder >
Browse >
Sending Data
Picture OR Sound
The types of data you can send are: Phone Book, My Profile,
Scheduler, Camera, Sound, File and Data Folder.
Ensure that the infrared ports of your GD87 and the second
phone or device are pointing at each other with no obstructions
in between.
Select Send
IrDA
43
Infrared
Sending My Profile Data
Once data is displayed:
From Idle mode:
for Phone Book data:
Ø
Phonebook > My
Profiles
Select SIM Phonebook
OR Mobile Phonebook
SIM Phone
Book selected?
Yes
x 2
No
Send IrDA
Select the group number
to register
Note: If you try to send data that cannot be forwarded or saved,
an error message will be displayed.
for Scheduler data:
Ø
Ø
Receiving Data via Infrared Port
From Idle mode:
x 2
Applications >
Infrared >
for all other data: the received data will automatically be
saved in the Received Folder.
Data Receive
44
Infrared
Using the Internet and Faxing
Testing the Infrared Connection
You can join your GD87 and a PC together via an infrared
connection to access the Internet, and to send and receive
faxes. The following explains how to set up communication
between the GD87 and a PC. These instructions should be
used in conjunction with your Internet platform software and/or
your fax software.
The following process will set up a PC to connect to your GD87
using the Windows standard communication software,
HyperTerminal, as an example (the process described may
vary slightly for other software packages).
Note: Depending on how your computer has been set up
‘HyperTerminal’ may not be located in ‘Communications’ (as
detailed in the first instruction).
Prerequisites
Faxing: contact your mobile phone network operator to
determine whether this feature is available to you.
Select Start > Programs > Accessories >
Communications > HyperTerminal
Ø
Ø
Double click on HyperTerminal.
In the Connection Description dialogue box, enter a name of
your choice in the Name field and click OK.
Ensure that you have set up a dial up account with an Internet
Service Provider.
In the Phone Number dialog box, select the country code,
enter your Internet Service Provider’s phone number and
confirm that GD87 is selected in the “Connect using” box.
Click OK.
You will need the installation CD from your ISP, or your account
details (i.e. phone number, user name and password) to
configure Dial Up Networking within Windows.
Ø
When you set up your Internet account for the first time, make
sure that you select GD87 as the connecting modem device.
(For more details contact your Internet Service Provider, or for
help using Windows Dial Up Networking, search Windows Help
[Start>Help])
When the connect dialogue box is displayed, click Cancel.
Select File > properties and confirm that GD87 is selected.
Click OK.
Ø
Ø
In the HyperTerminal window, type AT+CGMI and click.
If GD87 has connected successfully you will receive the
reply OK.
45
Infrared
Connecting to the Internet
Faxing
To connect to the Internet, you need to type in AT command in
the terminal screen on your PC.
Ensure that you have fax application software installed on your
PC. We recommend you use one of the following packages:
Microsoft Fax (www.Microsoft.com)
On the PC:
WinFax Pro or ProComm Plus (www.symantec.com)
HotFax 3.0 (www.smithmicro.com)
Display the terminal screen in the communication software
on your PC. (in our example: select Start > Programs >
Accessories > Communications > HyperTerminal)
Ø
Note: Ensure the fax application is set up to use the area code
and, for international calls, the country code.
On the GD87:
From Idle mode:
Applications >
Infrared >
Dial-Up
When Ready for Communication is displayed, type in the
AT command in the terminal screen on your PC.
Ø
Ø
Enter the phone number to connect to for Circuit Switch.
Use the dedicated phone number to packet for Packet
connection.
Enter AT commands as necessary.
Ø
46
Messages
Messages
This phone has various messaging features including SMS, MMS and E-mail:
SMS: You can enter the recipient’s phone number to send text and images.
MMS: You can attach images and music to text messages. The recipient can play it as a Slide show.
E-Mail: You can enter an e-mail address to send a message to another mobile phone or a PC via the Internet.
SMS
Setting the Message Centre Number
It is possible to receive, display, edit and/or send text messages
of up to 459 characters, (Dependent upon the language being
used) to mobile phones on your service providers network or
any network that has a roaming agreement. (Dependent on the
recipient’s phone parameters).
From Idle mode:
Messages >
SMS >
Parameters >
Message Centre
Phone Setup for SMS
Enter message centre number in
international dial format (see
‘International Dialling’)
Before a message can be sent, it is necessary to enter the
Message Centre number into Parameters.
x 2
The Message Centre number may have been preprogrammed
on the SIM.
47
Messages
Creating a Text Message
From Idle mode:
To access Character menu:
Create text message -
max. 459 characters
(see ‘Text Entry’) or
select User Message
Messages >
SMS >
Create
In Numeric mode: Character menu not available
Ø
In T9 mode:
Ø
Enter destination phone number /
recall a number from Phonebook
(see ‘Retrieving a Number’)
Recall
x 3
Using T9® predictive text input dramatically reduces the number of
key presses required. See ‘Text Entry’.
Ø
Ø
In other text modes:
x 3
Press and hold a
Digit key (1-9)
The user may be asked if delivery confirmation is required:
Ø
Select Yes / No
Note: The default setting for delivery confirmation can be
enabled/disabled using the Report parameter in the Parameters
menu.
48
Messages
User Messages
Message Options
When creating a text message, it is possible to use short
messages stored in the phone.
When a message is received and read the following options are
available:
To Edit a User Message
Reply to a Message
See ‘Creating a Text
Message’ to send the
message
From Idle mode:
Reply
Select
User
Messages
a
Personalise >
User
Delete a Message
Messages
Select Delete
Edit message as required
To enable the auto-deletion of messages, see ‘Parameters’
X 2
Forward a Message
Receiving Text Messages
Press to edit
Select Forw’d
message
N Indicates a new message has been received. An
exclamation mark (!) on the left of the message icon
indicates the message store is full.
When Read is displayed:
See ‘Creating a Text Message’ to send the message
Press to read
message
Move through the message,
identify the sender and the time
the message was sent
49
Messages
Cut, Copy & Paste Message Text
Managing Message Lists
This function allows the user to cut or copy message text from a
user defined message or a user created message, into a new or
existing message. It can also be used to paste text to a
previously sent message.
All messages will be stored on the SIM until they are deleted. A
stored message can be replied to, edited or deleted.
Inbox
With a message displayed:
Select Cut /
Copy
Put cursor at start of
text to edit
Received messages are stored in the Inbox. A N in the
receive list indicates an unread message.
Outbox
When a message has been sent or edited, it is stored in the
Outbox.
Highlight text
to edit
Create
This allows you to create a new message or reply to a
message.
Select
Paste
Select text screen
where text is to be
placed
Template
Template allows the creation of a message template, which can
be inserted into an outgoing message.
Note: The cut or copied text will remain in the phone memory
until other text is cut or copied.
To cut or copy text from a received message, select Forw’d
and repeat above as necessary.
50
Messages
Chat SMS
Cell Broadcasts
Chat SMS allows you to read sent and received messages with
another party on one screen.
You need to specify the topic(s) of information that you wish to
receive as broadcasts before you can receive them.
From Idle mode:
When reading a previously sent or received message:
Messages >
SMS >
Enter your
Broadcasts >
Topics
Select Chat
Nickname
Enter
x 2 to insert a
required topic
See ‘Creating a
Text Message’
to send the
new topic
x 2
number
To end the Chat
x 2
message
Turning Broadcasts On and Off
A Nickname may be up to 18 characters in length.
Ø
Ø
When receiving a message in chat mode, the text appears
above your previous message.
From Idle mode:
If the phone is not in chat mode when receiving a reply to a
chat message, it will be received as a normal SMS.
Ø
Ø
Select On / Off
Messages >
SMS >
Broadcasts >
Receive
If a voice call is received when in chat mode, you can
accept the incoming call and return to chat mode at the end
of the call.
Only the last sent and received messages are stored, all
other messages from the latest chat are automatically
deleted.
Ø
51
Messages
Message List
To rename a recipient group:
Enter new name, see ‘Text
Entry’
This is a store for the last received broadcast messages.
Messages can be deleted from here.
Rename
Languages
The language in which broadcast messages are displayed can
be changed.
x 2
Parameters
From Idle mode:
Adding names to a recipient group
Messages >
SMS >
Parameters
Select
x 2
The following parameters can be set:
Recipient Group
Select required
name
Recipient Group enables you to preset the destination of text
messages. There are 5 different recipient groups, allowing you
to store up to ten destinations in each.
Recall
x 2
Setting Recipient Group
Messages >
SMS >
Parameters >
Recipient Group
Select
required
group
52
Messages
Auto Delete
Multimedia Message Service (MMS)
When set, this feature automatically erases messages:
Received Read - will overwrite the oldest read message.
Received Any - will overwrite the oldest message, even though
it may not have been read.
MMS Configuration
MMS Configuration must be done before you can send or
receive an MMS message. You can create up to three server
profiles on the phone.
Lifetime
Note: Your MMS settings may have been pre-configured by
This is the duration that your message is stored at the Message
Centre. Delivery attempts will be repeated until the message
has been delivered or the Lifetime expires.
your service provider.
From Idle mode:
Message Centre
Messages >
MMS. >
Server List
Select required
server
Allows the Message Centre phone number to be edited - see
‘Setting the Message Centre Number’.
Report
Profile
Name
Edit
When your message has been delivered a confirmation will be
received if Report is set to Yes. If set to Ask the recipient will
be prompted if they want to send a reply.
Protocol
Enter the profile
name, see ‘Text
Entry’
Leave it on this
The Message Centre may be able to convert the message to
the format specified by the selected protocol.
screen to set the
server profile
options
x 2
53
Messages
Server Profile Settings
Creating a New MMS Message
Adding a recipient
The Server URL and Gateway IP are all set using the same
method.
From Idle mode:
Select
required
option
Enter the options details,
see ‘Text Entry’ or select
the required setting
Messages >
MMS >
Create
Select To, Cc or
Bcc
Repeat this process until all
required options are set
Enter recipients
address, see ‘Text
Entry’
x 2
Select Add
x 2
x 4
Note: To select an entry from the Phonebook, you must have
When Bearer Type is the selected option:
an address stored in that particular Phonebook entry.
Circuit Switch /
GPRS
Edit
Select
an item
Enter the options details,
see ‘Text Entry’ or select
the required setting
x 2
54
Messages
Adding the Subject or Message
Sent and Received Messages
Received messages are stored in the Inbox, if there are any
After adding the recipient(s):
unread messages, the number is displayed next to Inbox.
Select Subj
Enter text, see ‘Text
Entry’
Sent messages are stored in the Outbox.
x 2
Reading a Received Message
From Idle mode:
Attaching Image or Audio files
Messages >
MMS >
Inbox
Select required
message
After adding the recipient(s) :
Select
Message
Select Option
Scroll through
message
Your MMS can now be sent or saved by returning to the Create
menu and:
Select Send
or Save
Note: If Save is selected, the message is stored in the Outbox
to be sent or edited later.
55
Messages
Received Message Options
Message Send Options
With the message displayed:
From Idle mode:
Select
required
option
Messages >
MMS >
Options >
Mail Option
Select required
item and set as
necessary
Reply: Compose a reply to the sender.
Ø
Ø
Lifetime: Select Maximum or choose a time limit to set the
lifetime for sent messages.
Ø
Ø
Ø
Reply to All: Compose a reply to all the people who have
been sent the message.
Sender Visibility: Allows the recipient to view your details,
useful when replying to your message.
Forward: Pass a copy of the message on to another
Ø
person.
Report: Request a delivery report on the status of a sent
Sort: Sort all messages in the Inbox into a certain order.
Phonebook: Save the senders address in your Phonebook.
Protect: Lock the message against deletion.
Delete: Delete the message.
Ø
Ø
Ø
Ø
Ø
Ø
message.
Delete All: Delete all messages from the Inbox.
Review: View details of the message, e.g. file size (Kb).
56
Messages
Internet E-Mail
Server Profile Settings
E-Mails can be sent and received via the mail server of an
Internet Service Provider that supports POP3 / SMTP protocols.
The Mail Address, SMTP Server, POP3 Server, POP3 Account,
Password, Mail Delivery, Primary DNS and Secondary DNS are
all set using the same method.
Prior to using the Internet E-Mail feature, your SIM must be
data enabled and a contract with an Internet Service Provider
must be in place.
Select
required
option
Enter the options details,
see ‘Text Entry’ or select
the required setting
E-Mail Setup
From Idle mode:
Repeat this process until all
required options are set
Messages >
E-Mail >
Server List
Select required
server
x 2
Note: For the Mail Delivery option, select between Leave Msg.
and Delete Msg.
When Bearer Type is the selected option:
Select
Modify
Select
Profile
Name
Enter profile
name
Circuit Switch or
GPRS
Edit
Select
an item
Enter the options details,
see ‘Text Entry’ or select
the required setting
Leave it on this screen to set the server
profile options
x 2
x 2
57
Messages
Creating a New E-Mail Message
Adding a recipient(s)
Adding the Subject or Message
After adding the recipient(s):
From Idle mode:
Messages >
E-Mail >
Create
Select To, Cc
or Bcc
Select Subj
or Message
Enter text, see ‘Text
Entry’
x 2
Attaching files
Select Add
Press the Phonebook key
to select an entry from the
MobilePhonebook list
Or
After adding the recipient(s):
Enter e-mail
address, see ‘Text
Entry’
Select File
Select Add
x 2
x 4
Select
required
folder
Select
required file
x 2
58
Messages
Sending and Receiving E-Mail Messages
Reading a Received Message
Use this function to send and receive e-mails at the same time.
Any messages awaiting to be sent, are sent. If there are any
messages in your server mailbox they will be downloaded to the
phone.
From Idle mode:
Messages >
E-Mail >
Inbox
Select required
message
From Idle mode:
Messages >
E-Mail >
Send/Receive
View
If there are any unsent messages in the Outbox, you will be
prompted to send them.
Message Status
Messages have four possible states, each one is indicated by a
different icon:
If there are any new messages on the server, you will be
prompted to receive them. The messages will be downloaded to
the Inbox, with the number of messages displayed next to the
Inbox.
^ Indicates a message which has been read or sent.
N Indicates an unread or pending message.
% Indicates the message is locked.
& Indicates a broken message that is too long for the phone
or contains an attachment.
Note: If no messages are sent or received and the connection
is left idle, it will terminate after 60 seconds.
59
Messages
Received Message Options
Messages Setup Options
With the message displayed:
From Idle mode:
Select
required
option
Messages >
E-Mail >
Options >
Select required
item
Send Options
Reply: Compose a reply to the sender.
Recipient Group: Enables you to preset the destination of
E-Mail messages. There are 5 different recipient groups,
allowing you to store up to ten destinations in each.
Ø
Ø
Ø
Reply to All: Compose a reply to all the people who have
been sent the message.
Signature: You can insert essential information into
outgoing messages, e.g. a disclaimer.
Ø
Ø
Forward: Send the message on to another person.
Sort: Sort all messages in the Inbox into a certain order.
Phonebook: Save the senders address in your Phonebook.
Protect: Lock the message against deletion.
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Auto Quote: Enables you to attach text from the message
that you are replying to. Set to On or Off.
Managing the Inbox and Outbox
Once the Inbox or Outbox store are full, any new messages
received or created will overwrite existing messages from the
oldest first. To prevent messages being overwritten each list
should periodically be cleaned up, deleting any messages
which are no longer required.
Important messages can have a lock applied to them so that
they cannot be overwritten when the Send/Receive process is
activated.
Delete: Delete the message.
Delete All: Delete all messages from the Inbox.
Review: View details of the message, e.g. file size (Kb).
60
Call Information
Call Information
Recent Numbers
Recently dialled phone numbers will be stored in Last Call.
If Caller Identification is available, the caller’s phone number for an answered call will be stored in the Answered menu and an
unanswered call will be stored in the Unanswered menu. If Caller Identification is not available then calls will still be stored but will
have the date and time attributed to them.
When the store is full the next phone number will overwrite the oldest.
From Idle mode:
Calling the Last Dialled Number
Select
option
Select number/name
to redial
x 2
Returning an Unanswered Call
When the display shows that you have received calls but not
answered them.
If required, edit number
(see ‘Editing Phonebook
Entries’)
Store number in
Phonebook?
No
Last caller’s number
will be displayed, if
available
Select number/name
to redial
Yes
Press while number
is displayed
61
Call Information
International Dialling
Call Duration
Using the automatic international access code (+) you will be
able to dial international numbers without having to know the
code for the international exchange.
Use the Calls submenu to display information as follows:
Last Call - displays the duration and call charge if available,
of the last call. Times are indicated as: hours (0-99),
minutes (0-59), seconds (0-59) - HH:MM:SS.
Ø
Ø
From Idle mode:
Press and hold until
Select international
code name
All Calls - displays the duration and call charge, if available,
of Incoming and Outgoing calls. The lock code or PIN2 is
required to reset the timer and call charge.
+ is displayed
Call Waiting - Check the Call Waiting status.
Caller’s ID - Check the Caller’s ID status.
Withhold ID - Access the Withhold ID status.
Ø
Ø
Ø
Enter area code
and phone number
From Idle mode:
Phone Option >
Call Service >
Calls
Select
function
Notes: If the international code is known then it can be entered
in the normal fashion followed by the area code and phone
number.
Many countries / regions include an initial “0” in the area code.
This should, in most cases, be omitted when dialling
international numbers. If you have difficulties making
international calls, contact your service provider.
Note: The Calls function is SIM dependent. If the SIM does not
support this function, then items under the Calls submenu will
be found directly under the Call Service menu.
62
Call Information
GPRS Call Duration
Call Charges
Use the Connections submenu to display information as
follows:
To maintain control over the cost of calls that are made, the
phone can be set to restrict use to a finite number of units
overall.
Last Connection - displays the duration and amount of
data transfer of the last call. Times are indicated as: hours
(0-99), minutes (0-59), seconds (0-59) - HH:MM:SS.
Ø
Ø
Ø
Setting the Unit Price
Firstly, a price per unit must be entered. This is the cost that the
Service Provider charges for one unit of call time.
All Connections - displays the accumulated duration and
amount of data transfer. The lock code or PIN2 is required
to reset the timer.
From Idle mode:
Call Priority - determines whether an incoming voice call
should interrupt a data call. Select between On and Off.
Phone Option >
Call Service >
Service Charges >
Price Unit
Enter security
code
x 2
From Idle mode:
Phone Option >
Call Service >
Connections
Select
function
Enter currency
unit (max. 3
characters)
Enter unit
price
x 2
x 2
Note: The Connections function is SIM dependent.
Note: The “Service Charges” function is SIM/Service provider
dependent
63
Call Information
Setting the Maximum Unit Level
Setting a Warning Level
This function allows the user to pre-determine the maximum
cost of calls made.
A warning can be set as an indication that the maximum cost is
about to be reached. This function is SIM dependent.
From Idle mode:
From Idle mode:
Enter security
code
Phone Option >
Call Service >
Service Charge >
Phone Option >
Call Service >
Service Charge >
Max Cost
x 3
x 2
Warning At
Enter value in units at which
Enter maximum units permitted
point warning will sound
(corresponding cost will be displayed)
x 2
x 2
Note: The duration of one unit may vary during the day, peak
and off-peak times. Therefore, the call charge can be calculated
accordingly. However, call charge information may not give an
accurate reflection of the tariffs charged by your service
provider.
Call Identification
In the Call Service menu, the Caller’s ID and Withhold ID
functions allow you to check the status of whether a Caller’s
Identification is sent or can be received.
Note: When checking the status the phone must be registered
with a network.
64
Advanced Operation
Advanced Operation
Diverting Calls
Holding Calls and Call Waiting
Voice, fax and data calls can be diverted using different
circumstances and to different numbers. For example, you may
wish voice calls to be diverted to Voicemail in the event that the
phone is switched off.
Holding a Call
During a call:
Select
Hold
From Idle mode:
Phone Option >
Call Divert
Select type of
calls to divert
Resuming a Call
Select
Resume
Select
circumstances
to initiate divert
Enter number
to divert to
x 2
x 2
Making a Second Call
Enter number / recall from
Phonebook (see ‘Retrieving a
Number’)
Notes: When Divert is enabled the divert icon is displayed.
When updating or checking the status of Call Divert the phone
must be registered with a network.
The first call will be placed on hold.
65
Advanced Operation
Receiving a Second Call
Operation During Two Calls
If Call Waiting is switched on a second call can be received.
This is enabled from Phone Option > Call Service > Calls >
Call Waiting.
Swapping Between Calls
An icon indicates the current call.
Select
Swap
It is not possible to have more than one fax or data call at a
time. All voice calls must be ended before you can make or
receive a fax or data call.
Accept / Reject a Second Call
Select
option
End Current Call
Select
End
Note: If you accept the second call, the current call is placed on
hold.
End Current Call and Receive Second Call
The held call remains held.
With a call waiting:
End Both Calls
Press any key apart
from the following two:
66
Advanced Operation
Call Transfer
Multi-party Calls
With two calls connected, Call Transfer lets you connect them
together, ending your connection and leaving the two callers to
talk together.
A Multi-party call enables three to five people to be in
conversation at the same time. It is possible to swap between a
Multi-party call and another call in the same way as with two
separate calls.
When two calls are in use:
Enabling Multi-party
Select
Trans.
With two calls connected (one active, one on hold):
Select
Merge
The two calls will be connected to each other and your call will
be ended.
A Multi-party call has been enabled, all three people will be able
to talk to each other.
Note: Two call transfer cannot be utilised while in Multi-party
mode.
Adding to Multi-party
It is possible to add to the Multi-party call (up to a maximum of
five). Either by making a call or accepting an incoming call. The
call can then be merged into the Multi-party.
Note: When making a call or accepting an incoming call the
Multi-party call will be placed on hold. The callers in the
Multi-party call can continue to communicate with each other
while on hold.
67
Advanced Operation
Splitting a Multi-party
Ending a Single Connection
The user can select an individual from the Multi-party and
remove their connection. This enables you to talk privately
without the participation of the rest of the Multi-party.
During a Multi-party call:
Select
Option
Select a
caller
During a Multi-party call:
Select
Option
Select a
caller
Select
End
Select
Split
Ending all Connections
During a Multi-party call:
The selected caller will be split from the Multi-party call and the
Multi-party call will be placed on hold (the remaining Multi-party
call callers can still communicate).
Press to end all calls
Ending Multi-party Calls
The user can either select an individual in the Multi-party and
end the call or end the entire Multi-party call. If a call is held, or
another call is incoming then an individual call cannot be ended.
68
Advanced Operation
Changing to a New Network
When not in your home Country / Region, the user may use a
network that is not directly subscribed to, this is called
ROAMING.
When the Search Mode is set to Manual the phone will only use
a selected network. If coverage is lost another network should
be selected.
National Law may not permit roaming in your home region.
When the Search Mode is set to Automatic the phone will
automatically reselect a new network in order to maintain
optimum network availability. The Network List is used when
the Search Mode is set to Automatic. The location numbers in
the Preferred Network List show the search priority. Amend the
List as follows:
The New Network function is used to manually select a network
that is available in your current location.
From Idle mode:
Insert - stores a new network in the currently displayed
location and then moves other networks down.
Ø
Phone Option >
Network >
New Network
Edit - overwrites the old network with a new one.
Ø
Ø
Add - stores a new network at the end of the list.
Select
network
An X will be displayed in the information area if you cannot
register with the selected network.
69
Data Folder
The data saved in GD87 is located in the Data Folder. There are six pre-defined folders (Camera, Sound, Mail, Browser, Received,
Phonebook) plus five folders you can customise. The maximum capacity of Data Folder is 1MB, holding up to 900 files. The
maximum size of a file is 50 kilobytes.
Note: Changing SIM does not affect the contents of stored data.
Display Images and Text
Display Images Continuously
From Idle mode:
You can display all the images and animations stored in one
folder in the order listed, as a slide show.
Personalise >
Data Folder >
Browse
Select folder
where file is
located
Personalise >
Data Folder >
Browse
Select folder
where file is
Select
file
Select View
A new image
appears every
5 seconds
Select
Slide Show
Note: The phone cannot display a file that is not in one of the
supported formats.
Press to stop slide
show (not while an
animation is being
shown):
To move to
next image
press any key
except:
70
Data Folder
Melodies, Music and Images
Edit Melodies and Images
From Idle mode:
Playing Melodies and Music
Personalise >
Data Folder >
Browse
Select folder
where file is
located
From Idle mode:
Personalise >
Data Folder >
Browse
Edit
Select file
Melody
OR
Edit Image
Select folder
where the file is
Select file
Note: You cannot edit polyphonic ringtones, music files and
files that cannot be forwarded or saved.
71
Data Folder
Copy & Paste and Move Files
Customise Folders
From Idle mode:
You can customise and rename the folders User1 to User5.
Personalise >
Data Folder >
Browse
From Idle mode:
Personalise >
Data Folder >
Browse
Select folder to
rename
Select folder
where the file is
Select file
Select
Rename
Delete
displayed name
Select
option
Select folder where
the file will be pasted
or moved to
Type in new
name (max. 20
characters)
x 2
You cannot:
Ø
Ø
- copy a file that cannot be forwarded or saved;
- move or paste a file into a folder defined for a different file
type.
Note: Do not use special characters in the new name.
- move files in Phonebook.
You can :
- move or paste a file into the folder it is copied from;
-
to select Copy or Move while the file is displayed.
72
Data Folder
Rename Files
Jump to Create Mail Screen from Files
for Mail Attachment
From Idle mode:
From Idle mode:
Personalise >
Data Folder >
Browse
Select folder
where the file is
Personalise >
Data Folder >
Browse
Select folder
where the file is
located
Select
file
Select
Rename
Select
file
Select
Create Mail
Delete
displayed
name
Type in new
name (max. 20
characters)
Select Email or
MMS
x 2
The phone will display the ‘Create Mail’ screen.
Note: Do not use special characters in the new name.
You cannot:
- copy a file that cannot be forwarded or saved;
Ø
Ø
You can:
-
to select Create Mail while the file is displayed.
73
Data Folder
Delete Files
Transfer Files via Infrared
From Idle mode:
You can transfer images and sound files to another GD87 or
other devices with an infrared port. See ‘Infrared’ for details.
Personalise >
Data Folder >
Browse
Select folder
where the file
to be deleted is
Display File Information
Display Number of Saved Files
From Idle mode:
Select
file
Select
Delete
Personalise >
Data Folder >
Status
Display Folder and File Property
Press again if Set Confirmation for
Delete? is displayed
Folder Property
x 2
You can see the name of the folder and the number of files
stored in the folder.
From Idle mode:
Personalise >
Data Folder >
Browse
Select
folder
Select
Property
74
Data Folder
File Property
You can see the file name, date, file size, whether the file can
be forwarded and whether it can be saved.
From Idle mode:
Personalise >
Data Folder >
Browse
Select
folder where
file is
Select
file
Select
Property
Note: If there is not enough memory capacity in the folder
when you try to save a file, the phone will display:
Folder is Full. Delete Data? Either:
Press not to
delete file
Press to
delete file
OR
75
Schedule
The Scheduler can be used to register reminders for personal events as well as planning holiday periods.
Caution: Ensure that any settings made in the Scheduler will not contravene any regulations whereby the phone may automatically
power on when in an aircraft or medical facility etc. - see ‘Important Information’.
Creating a Reminder
From Idle mode:
Viewing Reminders
When in the Schedule menu:
Schedule
Create
x 2
Select the
required
reminder
View
Select
Time
Enter start date, Press:
Repeat for end date
x 2
x 2
Deleting a Reminder
Enter start time, Press:
From Idle mode:
x 2
Repeat for end time
Schedule
Delete
x 2
Select between Repeat type,
Memo and Ring Type
Modify each option as
required
76
Schedule
Setting a Holiday Reminder
Deleting Holiday Reminders
From Idle mode:
Schedule
Options
x 2
Schedule
Options
x 2
Select Day or
Day of the
Week
Holiday Set
Holiday Set
Holiday List
Press and hold
to remove
current date
Enter new
date
x 2
Select
required
Holiday date
x 2
Note: Repeat for each day of holiday as required.
To indicate that holiday reminder has been set, the date(s) will
be emboldened Red.
Jump to Date
Schedule
Jump
x 2
Press and hold to
remove current date
Enter Date
x 2
77
Games
Embedded Games (R)
x 3
Follow the on-screen instructions to play the game.
Downloadable Games (R)
The Downloadable Games menu enables you to use one
factory embedded game and download another game from the
games catalogue.
Note: A downloaded game will overwrite the previously
downloaded game.
Scroll through
Select
Games Menu
x 2
game
Follow the on-screen instructions to play the game.
78
WAP Browser
WAP Browser
The WAP (Wireless Application Protocol) Browser allows access to the Internet services supported by the network, such as news,
weather reports and sport.
Server Profile Settings
The Profile Name, Home URL, Linger Time, Gateway IP,
Security and Bearer Type are all set using the same method.
Before accessing the Internet, the SIM must be data enabled
and the configuration information must be entered.
Enter the options details,
see ‘Text Entry’ or select
the required setting
Select required
option
Note: This configuration information may have been
pre-programmed by your service provider. Modifying these
settings may cause failure of the Browser.
Repeat this process until all
required options are set
From Idle mode:
OK
Browser >
Server List
Five servers may be manually setup on the phone.
Select required
When Bearer Type is the selected option:
Circuit Switch
or GPRS
Edit
server
Edit
Select
an item
Enter the options details,
see ‘Text Entry’ or select
the required setting
x 2
79
WAP Browser
Browser Setting
Activating the Browser
Browser setting allows customisation of the browser interface
for items such as colour and font size.
From Idle mode:
Browser >
Start Browser
From Idle mode:
Select
required
option
Browser >
Browser Setting
The first time that the browser is activated, the Home URL
content displays (as defined by your service provider). The
Home URL is recalled from the cache each time the browser is
activated. (Cache is the phone’s memory that stores previously
downloaded content).
When recalling content from cache the phone remains off-line
(not connected to a WAP server).
Repeat this process until
all required options are set
Set options as
required
Navigating Content
Return to previous
Scroll up/down
page
Return to next page
(only if a return to previous page has been performed)
80
WAP Browser
Navigating Content(Continued)
Home Page: Displays the Home URL content as defined by
the network operator.
Ø
When linked text (underlined text) is highlighted:
Current URL: Display the current URL.
Enter URL: Type in a URL directly to go to a known site.
Ø
Ø
Ø
( indicates a table - with View displayed:
Page Memo: Saves the contents displayed on the current
screen.
Save Image: Saves the image displayed on the current
screen.
Ø
Ø
) Indicates an image which cannot be displayed
~ Indicates on-line browsing (Non Secure)
' Indicates on-line browsing (Secure)
Secure Information: Displays the information on the
current session.
Images: to display a page quicker, the images can be
diabled
Ø
Reload: Will reload and update the current page.
Ø
Ø
The Browser Menu
Reset: Deletes the content in cache and displays the Home
URL content.
The Browser contains its own menu which is applicable when
content is currently being displayed (either on-line or off-line).
Exit: Deactivates the Browser.
Ø
When Menu is displayed at the bottom left of the display
81
WAP Browser
Using Bookmarks
Deleting Bookmarks
To prevent the need to re-enter the URL each time, frequently
accessed pages may be bookmarked.
While viewing content:
Adding a Bookmark
Select
required
Bookmark
Bookmark
While viewing content:
Bookmark
x 2
Edit
Title
Press and hold
to remove the
name
Enter the
new name
Recalling pages using Bookmarks
x 2
While viewing content:
Renaming a Bookmark
Select
required
While viewing content:
Bookmark
Bookmark
Select
Bookmark
required
Bookmark
Select Delete
x 2
82
WAP Browser
Deactivating the Browser
When browsing on-line:
To review cache off line
When browsing off-line:
To return to Idle mode
Last Error
If an error should occur when using the Browser, use this
function to inform the network operator of the last error which
occurred with the phone to assist with a diagnosis of the
problem.
Browser >
Last Error
83
Camera Operation
You can take pictures with the built-in camera, send them in a multimedia (MMS) message or use them as Wallpaper.
Camera Controls
Taking a Picture
Preview
Screen
From Idle mode:
Camera Lens
View the required subject on
the Preview Screen
The captured image is shown on the Preview Screen.
To Store the image in the Data Folder:
Self Portrait
Mirror
To return to camera operation without storing the image:
Switch to
camera
mode
Note: If the phone does not detect any operation for three
minutes while in Camera Operation, it will return to Idle mode.
If a captured image is showing on the preview screen, it is
temporarily saved. If you turn off power while the image is
saved temporarily, the image will be deleted.
Shutter key
84
Camera Operation
Add the subject and message, if required. (See MMS: Creating
Sending a picture by MMS
a New Message.)
Select Send
or Save
Create Mail
MMS
Note: If Save is selected, the message is stored in the Outbox
to be sent or edited later.
Select To, Cc
or Bcc
x 2
Saving a Picture
Once a picture has been taken the picture will be saved to the
Camera Folder. To use a saved picture as your personal
wallpaper, see ‘Changing the Wallpaper’.
Press the Phonebook key
Select Name
to select an entry from the
Phonebook list
Select Recall
x 3
85
Camera Operation
Self Portrait
Zoom operation
The shutter button located on the top part of the clam shell can
be used to capture an image, for example, self portrait.
The x2 zoom can be used whilst viewing in the Preview Screen:
From Idle mode:
Close the phone,
view the scene in the
Self Portrait Mirror
To engage x2 Zoom
To return to Normal
Incoming Calls during Camera Operation
Brightness adjustment
If an incoming call is received during Camera Operation, the
phone will exit Camera Operation and switch to the incoming
call. If a captured image is showing on the preview screen, it is
temporarily saved.
The Brightness of an image can be set both before and after
taking the picture. Brightness can be increased or decreased by
2 steps either way.
On re-entering Camera Operation:
To change Brightness while taking a picture
To Store the image in the Data Folder:
Whilst viewing in the Preview Screen:
To decrease the
Brightness
To increase the
Brightness
To return to camera operation without storing the image:
86
Camera Operation
To change Brightness after taking a picture
When the required subject is shown on the Preview Screen:
Whilst viewing the captured image:
Select
required option
Select required
option
Edit Image
Brightness
Adjust Brightness
Twilight Mode: Improves picture taking in low light
Ø
conditions.
Close Up Mode: For close up work (Macro mode).
Ø
Ø
x 4
Effect: Choose from Sepia, Monochrome or
Negative/Positive effects.
Frame: Place a border around the image.
Preview Screen Menu
Ø
Ø
Ø
Self Timer: Delaying the taking of an image.
It is possible to select from various extra settings or functions.
Twilight Mode, Close Up Mode, Effect, Frame, Self Timer and
Image Format are all set using the same method.
Image Format: Select from JPG Fine, JPG Normal, JPG
Economy or PNG.
Data Folder: A shortcut to the Data Folder, see ‘Data
Folders’.
Ø
Ø
Create Mail: A shortcut to the Create Mail screen, see
‘Messages’.
87
Additional Features
Desktop Handsfree
Voice Memo (Dictaphone)
Desktop Handsfree allows you to hold a conversation without
holding the phone to your ear.
The Voice Memo feature allows you to record a two-way
conversation during a call, and to use the phone as a
Dictaphone. You can record up to 4 voice memos. The
maximum length of each is 14 seconds.
Note: Do NOT hold the phone to your ear in Handsfree mode.
Note: If a different SIM is installed any voice memos will be
lost.
Swapping Between Handsfree and Handheld Calls
When all four memo storage areas are occupied, a new
recording overwrites the oldest memo.
During a Handheld call:
Caution: Security of a recorded message is your responsibility.
Select H’free
You should ask for the other party’s consent before recording.
During a Handsfree call:
Record a Voice Memo
From Idle mode:
x 2 to revert to Handheld operation
Applications >
Voice Memo
Record
>
To answer a call Handsfree:
Press and hold
Notes: During a call, press Memo key. A tone will sound when
recording starts and again when it stops.
Press to stop recording a
memo
Press again to start
recording next memo
88
Additional Features
Play Back a Voice Memo
Note Pad
From Idle mode:
During a call, numbers can be entered which you may wish to
dial when the call has ended.
Applications >
Voice Memo >
Playback
Select desired
voice memo
During a call:
Press while number
displayed to store in
Phonebook (the
Enter
Press to dial
number (once
current call ends)
To stop playing:
required
phone
number
or
current call ends)
x 2
DTMF Tones
Note: The Note Pad is available during playback - see ‘Note
Pad’
DTMF tones can be sent during conversation. These are often
used to access voice mail, paging and computerised home
banking. For example, you may need to input a number to
remotely access voice mail messages. A phone number may be
stored in the Phonebook with DTMF tones, allowing the number
to be dialled upon recall and the DTMF number to be sent
automatically.
Volume Control during Playback
While playing back:
Adjust volume
Send DTMF Tones During a Call
Delete Memo
Enter digits:
Applications >
Use digits 0 - 9
plus:
Select desired
voice memo
Voice Memo >
x 2
Delete
89
Additional Features
Pause Dial
Setting Clock Display
Using pauses allows you to send DTMF tones automatically.
From Idle mode:
Applications >
Enter phone
number
Press and
hold until P is
displayed
Enter DTMF
numbers
Clock Function >
Clock Format >
Choose Clock
When the call is successful DTMF tones will be sent after 3
seconds.
Select
option
If the DTMF tones are unsuccessful then the destination of your
call may require that the length of the tones be increased, as
follows:
Setting Auto Adjustment
From Idle mode:
When travelling to a country / region which has a roaming
agreement with your home network, the Second Clock is
adjusted automatically. However, for countries / regions which
have several time zones in the same area manual adjustment is
required.
Personalise >
DTMF Length
Select
Long
From Idle mode:
Second Clock
Applications > Clock Function > Clock
Set > Away >Auto Adjustment > Home
Area
The Second Clock can either be set to be auto-adjusting,
whereby the second time is set from the code of the current
network, or a specified time difference can be set manually.
Select your
home area
90
Additional Features
Enabling Auto Adjustment
Setting Summer Time
From Idle mode:
From Idle mode:
Applications > Clock Function >
Clock Set > Away >Auto Adjustment
> Auto Adjustment
Applications > Clock Function >
Clock Set > Away > Summer Time
Select On OR
Off
Select On OR
Off
Repeat to disable Auto Adjustment.
Once enabled, following the same procedure will disable
Summer Time.
Setting Manual Adjustment
Accessory Related Features
From Idle mode:
When Auto Answer is switched on, and Personal Handsfree is
connected, a call will be answered without pressing any keys.
Any call waiting should be answered in the normal way.
Applications > Clock Function > Clock
Set > Away > Time Difference
This is also applicable to the Handsfree Car Kit accessory.
See the documentation provided with the relevant Accessory for
operation details.
Select time
difference
91
Text Entry
You can use alphanumeric characters to enter details into the Phonebook, to create text, e-mail messages, etc.
Text Mode
Key
0
1
2
3
4
5
6
7
8
9
*
#
T9®
Normal (ABC)
+_
Greek (ÁÂÃ)
Extended (AÄÅ)
+_
Numeric (0 - 9)
0+P_
Alternatives
+_
Punctuation
.@/:;*#+-”,!¡?¿_()[]{}’&%\^~|<>=_£$¥¤§
1
2
3
4
5
6
7
8
9
abc
ABCabc
DEFdef
ABÃ
ÄÅÆ
ÇÈÉ
AÄÅÆBCÇaäåæàbc
DEÉFdeéèf
GHIghiì
def
ghi
GHIghi
jkl
JKLjkl
JKLjkl
ÊËÌ
ÍÎÏ
ÐÑÓ
ÔÕÖ
×ØÙ
mno
pqrs
MNOmno
PQRSpqrs
TUVtuv
MNÑOÖØmnñoöøò
PQRSpqrsß
TUÜVtuüùv
WXYZwxyz
Shift/Lock
Space
tuv
wxyz
WXYZwxyz
Shift/Lock
Space
Shift/Lock
Space
@
Space
#
Press the key once to create a single capital letter; press twice to enter all subsequent characters as capital letters;
press again to return to lower case letter entry.
Ø
92
Text Entry
Text Input
Editing Text
Move up / down one text
line
Delete character to
left of the cursor
T9®
Using this mode of text entry dramatically reduces the number
of key presses required:
Move left / right one
character
Press and hold to
delete the current
line
Press a key once for any letter you require on that key. The
desired letter may not be displayed. Continue pressing other
keys until the end of a word is reached; then check that the
word has been typed correctly before continuing on to the next
word. If the combination of letters typed has produced a word
When the cursor is moved over a character and another key
pressed this will insert the new character immediately before
the selected character.
which is not the one you require, press 0 or up or down
repeatedly until the correct word is displayed. Continue to the
next word.
T9® is a trademark of Tegic Communications Inc.T9® Text Input is licensed under one or more of the following:
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554; Canadian Pat. No. 1,331,057;
United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No.HK0940329; Republic of Singapore Pat. No.
51383; Euro.Pat. No. 0 842 463 (96927260.8) DE/DK, FI, FR, IT, NL, PT.ES, SE, GB; and additional patents
are pending worldwide.
If the word you require is not in the internal dictionary then it
should be entered using the Normal ( ABC ) mode.
Other Text Modes
Select text mode (displayed in
Information Area on screen)
You could enter text using the character menu:
Press and hold a Left soft
key (1~9) to enter menu
Highlight character
Normal ( U ), Greek ( V ) or Extended ( W ) modes:
each time a key is pressed in quick succession it displays the
next character available on that key. Releasing the key or
pressing another key enters the character displayed. The cursor
moves to the next position.
To return to message
screen
Press to select
character
93
Troubleshooting
Should any problem persist contact your dealer.
Problem
Cause
Remedy
Check that the battery is fully charged and correctly
connected to the phone
Phone will not switch on
The network you are using and the
condition of the battery can affect
battery life
Extremely short battery life for a
new battery
Short battery life for an old battery
The battery has worn out
Replace with a new fully charged battery
The charging indicator does not
light, the battery level indicator
does not appear and the phone
cannot be switched on when
charging
The battery is not attached to the
phone or when the battery has
been deeply discharged the phone minutes before the indicator is lit and attempting to
will take a short time until the
indicator lights
Leave the phone charging the battery for a few
switch it on
The battery is not attached to the
phone
Ensure the battery is fitted to the phone prior to
commencing charging.
Battery fails to charge
Battery has been connected to the
phone after the Fast Travel
Charger has been switched on
94
Troubleshooting
The phone is locked
Unlock the phone
Outgoing calls are barred
Disable the outgoing call barring, or barred dial
Calls cannot be made
The phone is not registered to a
network
Move to a coverage area and operate your phone
after it has registered with a network.
Check your SIM supports Fixed Dial
Calls cannot be made from Fixed
Dial Store
Check if the Fixed Dial is switched on
Check the phone number is stored in the Fixed Dial
The phone is not switched on
Incoming calls are barred
Switch the phone on
Disable the incoming call barring
Calls cannot be received
The phone is not registered to a
network
Move to a coverage area and operate your phone
after it has registered with a network.
Check that the antenna symbol S is displayed - move
to a coverage area and operate your phone when the
antenna symbol is displayed
You are not in a GSM coverage
area
Emergency calls cannot be made
The phone is locked
Unlock the phone
Phone numbers cannot be recalled
from Phonebook
Phone number has been restricted Switch off restriction
95
Troubleshooting
Important Error Messages
These are some of the most important error messages which may be displayed:
Area Not Allowed
Roaming in the selected area is not allowed
Network Not Allowed
Roaming with the selected network is not allowed
The network has detected an authentication failure because your SIM is not registered with that
network - contact your service provider
Security Failure
SIM Blocked / Contact Service The SIM is blocked because one of the PIN/PIN2 unblocking keys (PUK/PUK2) has been
provider
entered incorrectly ten times - contact your service provider
The phone has detected a problem with the SIM - switch the phone off and then back on; if the
message is still displayed contact your service provider
SIM Error
The SIM has failed one or more of the SIM personalisation checks - contact your service
provider
SIM Invalid
The selected feature is either not supported by the SIM or is not available with the current
subscription - contact your service provider
Function Unavailable
PIN2 Invalidated
The PIN2 is blocked permanently because the wrong PUK2 has been entered ten times,
services controlled by PIN2 cannot be used - contact your service provider
A message has been received but the message store is full - to receive messages, delete some
of the currently stored messages or set messages to Auto Delete
Message Rejected Store Full
Phone Number Too Long
(Max:20)
The edited or newly created Phonebook number is too long for the SIM
96
Troubleshooting
The message area is full. Your messages cannot be stored until some of the currently stored
Warning Store Full Continue?
Verification Failure
messages are deleted
On changing the phone lock code, verification of the new code is incorrect - retry changing the
lock code with correct verification
Disabling or enabling the lock code has failed due to incorrect entry of the lock code - re-enter
lock code
Incorrect Lock Code
Incorrect PIN / PIN2 / PUK /
PUK2
The entered code is incorrect - re-enter code correctly
Auto Redial List Full
Redial list of unsuccessfully dialled numbers is full - switch the phone off and then on again
97
Glossary of Terms
APN
Access Point Name. Directs the user to the gateway or the required service.
Permanently removes selected text from short text message
Cut
Copy
CHAP
Copies selected text from short text message without removing it from the original message
Challenge Handshake Authentication Protocol. A security feature for the GPRS network.
Dual Tone Multi-Frequency tones allow you to communicate with computerised phone systems, voice
mailboxes etc.
DTMF Tones
GPRS
General Packet Radio Service. The Technology the phone uses.
Global System for Mobile Communications. The name given to the advanced digital technology that your phone
uses.
GSM
Network
Operator
The organization responsible for operating a GSM network.
PAP
Password Authentication Protocol. A security feature for the GPRS network.
Used for the control of the Call Bar. Supplied by your service provider.
Password
98
Glossary of Terms
Personal Identification Number used for SIM security. Supplied by your service provider. If the PIN is entered
incorrectly 3 times, the PIN will be blocked.
PIN
Personal Identification Number used for the control of Fixed Dial Store and Call Charge metering. Supplied by
your service provider. If the PIN2 is entered incorrectly 3 times, the PIN2 will be blocked.
PIN2
PIN/PIN2 Unblocking Key. Used to unblock the PIN/PIN2. Supplied by your service provider. If the
PUK/PUK2 is entered incorrectly 10 times, the PUK/PUK2 will be blocked.
PUK/PUK2
Registration
Roaming
The act of locking on to a GSM network. This is usually performed automatically by your phone.
The ability to use your phone on networks other than your Home network.
Service
Provider
The organization responsible for providing access to the GSM network.
Subscriber Identity Module. A small smart-card which stores unique subscriber and user-entered information
such as Phonebook and Short Messages. Supplied by your service provider.
SIM
Wireless Application Protocol. The communication standard which enables you to download resources from
the Internet to your phone
WAP
99
Specifications
Bands supported: .
.
.
.
.
.
.
GSM900 Class 4
GSM1800 Class 1
GSM1900
SIM Type: .
Phonebook Memory:
Animation Themes:
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3V only
200 + SIM
.
1
Standby Time (hrs): .
.
.
.
.
.
75 - 220
Voice Memo & Dictaphone: .
4 x 14 seconds
User Composed Melody:
.
.
.
.
.
.
1
Note: Talk and Standby time will be dependant upon network
condidtions, SIM usage and battery condition.
Games:
.
.
.
.
.
.
.
.
.
.
.
.
1
Backlight colours: .
1 (White)
Talk Time (hrs): .
.
.
.
.
.
.
.
1.6 - 7
Ringtones: .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
15 Fixed;
(Varies depending on Data Folder)
Temperature Range
.
.
.
.
.
.
Charging:
Storage: .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
+5ºC - +35ºC
-20ºC - +60ºC
Scheduler: .
Alarms:
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Up to 100 Entries
4
.
.
Weight:
.
.
.
.
.
.
.
.
.
.
.
.
103g (including battery)
Graphics Formats Supported: . GIF87a, GIF89, JPEG,
Dimensions:
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
WBMP, BMP, PNG
Height: .
Width: .
Depth: .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
97.5mm
49mm
23mm
Maximum Graphics Size:
.
.
50kB
1Mb
Graphics Storage Capacity: .
Supply Voltage: .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3.7V DC, 720 mAh Li-ion
Fixed
Antenna: .
.
.
.
.
.
.
Charge Time:
Up to 90 Min
Note: Charging time will be dependant on usage and battery
condition.
100
EU Warranty
EU Warranty
EU/EEA - Wide guarantee is applicable in the EU/EEA and Switzerland.
Panasonic GSM European Service Guarantee Conditions
Dear Customer,
Thank you for buying this Panasonic digital cellular telephone. The Panasonic GSM European Service Guarantee only applies while traveling in countries
other than where the product was purchased. Your local guarantee is applicable in all other cases. If your Panasonic GSM telephone requires service
while abroad, please contact the local service company shown on this document.
The Guarantee
The applicable period of the European wide guarantee for GSM is generally 12 months for the main body and 3 months for the rechargeable battery. With
respect to a product used in a country other than a country of purchase, notwithstanding what is stated in the conditions below, the customer will benefit,
in that country of use, from these guarantee periods of, respectively, 12 and 3 months, if these conditions are more favorable to him than the local
guarantee conditions applicable in such country of use.
Conditions of Guarantee
When requesting guarantee service the purchaser should present the warranty card together with proof of purchase, to an authorised service centre.
The guarantee covers breakdowns due to manufacturing or design faults; it does not apply to other events such as accidental damage, however caused,
wear and tear, negligence, adjustment, modification or repair not authorised by us.
Your sole and exclusive remedy under this guarantee against us is the repair, or at our option the replacement, of the product, or any defective part or
parts. No other remedy, including, but not limited to, incidental or consequential damage or loss of whatsoever nature shall be available to the purchaser.
This is in addition to and does not in any way affect any statutory or other rights of consumer purchasers. This guarantee applies in countries shown on
this document at the authorised service centres detailed for that country.
UK
Service Centres in England
Tel. +44 8705 159159
D
Panasonic Service Center Leipzig
KES Keilitz-Electronic-Service GmbH
Föpplstraße 19
04347 Leipzig
Tel. +49 (0)341/ 244 33 33
Panasonic Service Center Dresden
SERKO GmbH
Großenhainer Straße 163
01129 Dresden
IRL
Service Centres in Ireland
Tel: +353 1 2898333
Panasonic Service Center ChemnitF
WPS Rundfunk- u. Fernsehservice GmbH
Fietenstraße 16
09130 ChemnitF
Tel. +49 (0)371/ 40 10 359
Tel. +49 (0)351/ 85 88 477
Panasonic Service Center Cottbus
Petsch Kundendienst GmbH
Am Seegraben 21
03058 Gross-Gaglow
Panasonic Service Center Berlin
SERKO GmbH
Tel. +49 (0)355/ 58 36 36
Schwedter Straße 34a
10435 Berlin
Tel. +49 (0)30/ 44 30 322
101
EU Warranty
Panasonic Service Center Berlin
RUESS SYSTEMS
Thrasoltstraße 11
Panasonic Service Center Düsseldorf
VTH GmbH
Kölner Straße 147
Panasonic Service Center München
G.Berghofer & W.Kaller GmbH
Helene-Wessel-Bogen 7
80939 München
10585 Berlin
40227 Düsseldorf
Tel. +49 (0)30/ 342 2013
Tel. +49 (0)211/ 77 90 25
Tel. +49 (0)89/ 318 907-0
Panasonic Service Center Rostock
warnow electronic service gmbh
An der Jägerbäk 2
Panasonic Service Center Essen
Bernd van Bevern GmbH
Heinrich-Held-Straße 16
45133 Essen
Panasonic Service Center Augsburg
Klaus Bienek
Affinger Straße 4
18069 Rostock
86167 Augsburg
Tel. +49 (0)381/ 82 016
Tel. +49 (0)201/ 84 20 220
Tel. +49 (0)821/ 70 70 75
Panasonic Service Center Hamburg
ELVICE Service GmbH
Spaldingstraße 74
Panasonic Service Center Osnabrück
Petsch Kundendienst GmbH
Pagenstecherstraße 75
Panasonic Service Center Nürnberg
Herbert Geissler GmbH
Friedrich-Ebert-Straße 21
90537 Feucht
20097 Hamburg
49090 Osnabrück
Tel. +49 (0)40/ 23 08 07
Tel. +49 (0) 541/ 68 038
Tel. +49 (0)9128/ 70 67-0
Panasonic Service Center Rendsburg
FERNSEH-DIENST B&W Service GmbH
Kieler Straße 41
Panasonic Service Center Wiesbaden
J. Hemmerling - VAD GmbH
Ostring 7
Panasonic Service Center Eisenach
Blitz Electro-Electronic-GmbH
Bahnhofstraße 17
24678 Rendsburg
65205 Wiesbaden
99817 Eisenach
Tel. +49 (0)4331/ 14 11-0
Tel. +49 (0)6122/ 90 91 10
Tel. +49 (0)3691/ 29 29 42 8
Panasonic Service Center Bremen
COM Elektronik Service GmbH
Rübekamp 50
28219 Bremen
Tel. +49 (0)421/ 691 80 69
Panasonic Service Center Mannheim
N. Schaaf
Reichenbachstraße 21-23
68309 Mannheim
A
Service-Fentren in Österreich
Funk Fuchs GmbH & CoKg Unterhart 90
4642 Sattledt
Tel. +49 (0)621/ 72 787-0
Panasonic Service Center Hannover
COM Elektronik Service GmbH
Vahrenwalder Straße 311
30179 Hannover
Panasonic Service Center Stuttgart
Hans Beck
Friedrich-List-Straße 38
70771 Leinfelden-Echterdingen
Tel. +49 (0) 711/ 94 701-0
Tel. +43 7244 733
Funktechnik Seissl
Dorf 79
6330 Schwoich
Tel. +43 5372 8217
Tel. +49 (0)511/ 37 27 91
Panasonic Service Center Magdeburg
SERKO GmbH
Ebendorfer Chaussee 47
39128 Magdeburg
Panasonic Service Center Reutlingen
Herbert Geissler
Lichtensteinstraße 75
72770 Reutlingen
Tel. +49 (0)7072 / 92 96-0
Electro Oberndorfer
Linzer Straße 2-4
4840 Vöcklabruck
Tel. +43 6772 72889
Tel. +49 (0)391/ 289 90 69
Panasonic Austria Handelsges.mbH
Laxenburger Straße 252
1232 Wien
Tel. +43 222/61080
102
EU Warranty
Négoce Technique etMaintenance
40 boulevard Bessières
75017 PARIS
Tél. : 01.44.85.21.66
Fax : 01.42.29.60.05
FR
DK
For nærmeste servicecenter ring Panasonic
Danmark
CETELEC
FI de la Delorme
5 Avenue Paul héroult
13015 MARSEILLE
Tél. : 04 96 15 77 77
Tél. : 04 91 58 07 55
Tel. +45 43 20 08 50
S.B.E.
F.I. de la Liane
BP 9
S
62360 SAINT LEONARD
Tél. : 03.21.10.10.21
Fax : 03.21.80.20.10
CORDON Electronique
BP 460
FI Taden
22107 DINAN CEDEX
Tél. : 02.96.85.82.20
Fax : 02.96.85.82.21
Firmor I Sverige
Komrep
Rosenlundsgatan 4
411 20 Göteborg
Tel. +46 031-173354
NL
Service-centra in Nederlands
Signalstyrkan
EASY REPAIR
26 rue des Cosmonautes
31400 Toulouse
Tél. : 05.62.71.48.14
Fax : 05.62.71.48.15
Kungsholmstorg 4
104 22 Stockholm
Tel. +46 08-6542500
Panasonic-Centre Nederland
(Servicom bv)
P.O Box 16280
2500 BG
Den-Haag
Nederland
CR service
Industribyn 3
232 37 Malmö
Tel. +46 040-430030
EASY REPAIR
22 boulevard des Brotteaux
69006 Lyon
Tel. +31 703314314
Fonweg 60
2516 BM
Den-Haag
Nederland
Tel. +31 703314314
Tél. : 04.72.83.02.02
Fax : 04.78.52.40.38
SF
Huoltokeskukset Suomessa:
ELECTRONIQUE SERVICE
Avenue Figuières
FAC Font de la Banquière
34970 LATTES
Tél. : 04.67.15.96.30
Fax : 04.67.20.04.72
KAUKOMARKKINAT OY
PANASONIC-HUOLLOT Kutojantie 4
02630 Espoo
Puh. +358 09 521 5151 Huolto
Puh. +358 09 521 5155 Varaosat Ja Tarvikkeet
I
Per I Centri Assisitenza in Italia
GENERAL ELECTRONIQUE
16 rue Joseph Cugnot
F.I. Bracheux
60000 BEAUVAIS
Tél. : 03.44.89.79.00
Fax : 03.44.05.16.96
SETELE OY
Vanha Viertotie 7
00300 Helsinki
Servizio Clienti
Tel. +39 02/ 67072556
Puh. +358 09 549100
E
PLAY-SHOP SERVICE Keskuskatu 3
00100 Helsinki
Puh. +358 09 27053626
Panasonic España, S.A.
Servicio de Atención a Usuarios:
Tel: 902 15 30 60
103
EU Warranty
MEGAFIX KY
Louhenkatu 9
74100 Iisalmi
Puh. +358 017 14631
ÕðïêáôÜóôçìá Âüñåéáò ÅëëÜäáò:
Ê. ÊáñáìáíëÞ 11, 54638 ÈÅÓÓÁËÏÍÉÊÇ
Ôçë. ÊÝíôñï: (031) 245.840-3
B
Centres de service après-vente en Belgique
BROOTHAERS
Hoevelei 167
2630 AARTSELAAR
Tel. +32 03/887 06 24
T: MI.M.HAAPOJA
Miilukatu 7
40320 Jyväskylä
Puh. +358 014 677121
P
Centros de Assistência em Portugal
PAPELACO, S.A.
Vale Paraiso - Ferreiras
8200 ALBUFEIRA
ALGARVE
HENROTTE
OUTOKUMMUN PUHELIN Pohjoisahonkatu 9
83500 Outokumpu
Puh. +358 013 562211
Rue du Campinaire 154
6240 FARCIENNES
Tel. +32 071/39 62 90
Tel. +351 89 589960
SETELE OY
Rengastie 31
60100 Seinäjoki
Puh. +358 06 4148344
PIXEL VIDEOTECH
Rue St Remy 7
4000 LIEGE
PAPELACO, S.A.
Largo de Santos, 9
1200 LISBOA
Tel. +32 041/23 46 26
Tel. +351 1 3970539
TURUN J-MARKKINAT OY Tuureporinkatu 6
20100 Turku
Puh. + 358 02 2332685
DELTA ELECTRONICS
Rue P.d’Alouette 39
5100 NANINNE
PAPELACO, S.A.
Largo do Tribunal, Lote 11
2400 LEIRIA
Tel. +32 081/40 21 67
Tel. +351 44 28071
N
ELEKSERVICE FEYS Houthulstseweg 56
8920 POELKAPELLE
PAPELACO, S.A.
Rua Cidade de Santos, 31R/C
9000 FUNCHAL
MADEIRA
Tel. +351 91 231523
Servicesenter I Norge
Tel. + 32 057/48 96 37
Norsk Elektronikksenter
Fetveien 1
2007 Kjeller
AVS WAASLAND Lavendelstraat 113
9100 ST NIKLAAS
Tel. +32 03/777 99 64
Tlf: +47 63 80 45 00
PAPELACO, S.A.
Rua do Outeiro,
Lote 25 - Gemunde
4470 MAIA
PORTO
Tel. +351 2 944 0354/9
A.V.T.C SA
Kleine Winkellaan 54
Panasonic Norge AS
Østre Aker vei 22
0508 Oslo
1853 STROMBEEK-BEVER Tel. + 32 02/267
40 19
Tlf: +47 22 91 68 00
RADIO RESEARCH
Rue des Carmélites 123
1180 BRUXELLES
PAPELACO, S.A.
Rua Major Leopoldo da Silva,
Lote 3
GR
ÊÝíôñá ôå÷íéêÞò õðïóôÞñéîçò
Tel. +32 02/345 68 56
3500 VISEU
Tel. +351 32 424771
VIDEO TECHNICAL SERVICE
Av. du Roi Albert 207
1080 BRUXELLES
INTERTECH S.A.
International Technologies
Áöñïäßôçò 26, 167 77 Åëëçíéêü
Tá÷. Èõñ.: 738 21, 167 10 ÅËËÇÍÉÊÏ
Ôçë. ÊÝíôñï: (01) 9692.300
Tel. +32 02/465 33 10
104
EU Warranty
SERVICE CENTER Kapellestraat 95
9800 DEINFE
Tel. +32 09/386 67 67
ÝSMÝR BRANCH OFFICE
CUMHURÝYET BULVARI NO:330 K.:6 D.:608
SEVÝL ÝÞ MERKEFÝ 35520 ALSANCAK-ÝFMÝR
Tel: 90-232-464 29 01 pbx
TOP SERVICE
Westerloseweg 10
2440 GEEL
Fax: 90-232-422 67 44
Tel. +32 014/54 67 24
BURSA BRANCH OFFICE
ÞEHREKÜSTÜ MAHLLESÝ DURAK CADDESÝ
NO.:7 BURSA
Tel: 90-224-225 10 46 pbx
Fax: 90-224-223 81 03
TELECTRO SC
Quai des Ardennes 50
4020 Liège
Tel. +32 041/43 29 04
L
ADANA BRANCH OFFICE
REÞATBEY MAH.FUFULÝ CAD.GÜLEK SÝTESÝ
A BLOK NO: 75b 01120 ADANA
Tel: 90-322-458 39 52 pbx
Centres de service après-vente au Luxembourg
NOUVELLE CENTRAL RADIO
Rue des Jones 15
Fax: 90-322-453 21 32
L - 1818 Howald
Luxembourg - Grand Duché
Tel. +32 40 40 78
TRABFON BRANCH OFFICE
MARAÞ CAD.MARAÞ APT.NO:51 D.:2 61200
TRABFON
CH
Tel: 90-462-321 33 08
Jonh Lay Electronics AG
Littauerboden
Fax: 90-462-326 37 78
6014 Littau
ANTALYA BRANCH OFFICE
ALTINDAÐ MAH. 146 SOKAK ÖFKOÇ
APT.NO:9/1-2A ANTALYA
Tel: 90-242-243 23 70 / 3 Lines
Fax: 90-242-243 23 72
Phone: +41 41 259 9090 Fax: +41 41 252 0202
TR
TEKOFAKS ISTANBUL CENTRE OFFICE
KAÐITHANE CADDESI SEVÝLEN SOKAK NO.
58 80340 ÇAÐLAYAN-ISTANBUL
Tel: 90-212-220 60 70 / 14 Lines
Fax: 90-212-220-60 94
DÝYARBAKIR BRANCH OFFICE
LÝSE CADDESÝ GÖKALP APT.NO: 18/A
DÝYARBAKIR
ANKARA BRANCH OFFICE
Tel: 90-412-228 73 00
GÜVEN MAH.FARABI SOKAK NO: 38/6 06690
KAVAKLIDERE- ANKARA
Fax: 90-412-223 59 00
Tel: 90-312-467 30 94/2 Lines pbx
Fax: 90-312 467 85 38
105
EU Warranty
Where the consumer sends the appliance for repair to the sales company
or national distributor in the country of use of the appliance, the service will
be provided on the same local terms and conditions (including the period of
guarantee coverage) as prevail for the same model appliance in the
country of use, and not the country of initial sale in the EU/EEA. Where the
consumer sends the appliance for repair to the sales company or national
distributor in the EU/EEA country where the appliance was originally
marketed, the repair service will be provided on the local terms and
conditions prevailing in the country of initial sale in the EU/EEA.
EU/EEA - Wide Guarantee: Conditions applicable in any country
other than the country of original purchase.
When the purchaser finds the appliance to be defective, he should promptly
contact the proper sales company or national distributor in the EU/EEA
country where this guarantee is claimed, as indicated in the “Product
Service Guide” or the nearest authorised dealer together with this
guarantee and proof of date of purchase. The purchaser will then be
informed whether:
(I) the sales company or national distributor will handle the repair service:
or
(ii) the sales company or national distributor will arrange for
trans-shipment of the appliance to the EU/EEA country where the
appliance was originally marketed; or
Some product models require adjustment or adaptation for proper
performance and safe use in different EU/EEA countries, in accordance
with local voltage requirements and safety or other technical standards
imposed or recommended by applicable regulations. For certain product
models, the cost of such adjustment or adaptation may be substantial and it
may be difficult to satisfy local voltage requirements and safety or other
technical standards. It is strongly recommended that the purchaser
investigates these local technical and safety factors before using the
appliance in another EU/EEA country.
(iii) the purchaser may himself send the appliance to the sales company or
national distributor in the EU/EEA country where the appliance was
originally marketed.
If the appliance is a product model which is normally supplied by the sales
company or national distributor in the country where it is used by the
purchaser, then the appliance, together with this guarantee card and proof
of date of purchase, should be returned at the purchaser’s risk and
expense to such sales company or distributor, which will handle the repair
service. In some countries, the affiliated sales company or national
distributor will designate dealers or certain service centres to execute the
repairs involved.
This guarantee shall not cover the cost of any adjustments or adaptations
to meet local voltage requirements and safety or other technical standards.
The sales company or national distributor may be in a position to make the
necessary adjustments or adaptations to certain product models at the cost
of the purchaser. However, for technical reasons it is not possible to adjust
or adapt all product models to comply with local voltage requirements and
safety or other technical standards. Moreover, where adaptations or
adjustments are carried out the performance of the appliance may be
affected.
If the appliance is a product model which is not normally supplied in the
country where used, or if the appliance’s internal or external product
characteristics are different from those of the equivalent model in the
country where used, the sales company or national distributor may be able
to have the guarantee repair service executed by obtaining spare parts
from the country where the appliance was originally marketed, or it may be
necessary to have the guarantee repair service executed the sales
company or national distributor in the country where the appliance was
originally marketed.
In either case, the purchaser must furnish this guarantee card and proof of
date of purchase. Any necessary transportation, both of the appliance and
of any spare parts, will be at the purchaser’s risk and expense, and there
may be a consequent delay in the repair service.
If in the opinion of the sales company or national distributor in the country
where the appliance is used the purchaser has the necessary adjustments
or adaptations to local voltage requirements and technical or safety
standards properly made, any subsequent guarantee repair service will be
provided as above indicated, provided the purchaser discloses the nature
of the adjustment or adaptation if relevant to the repair. (It is recommended
that the purchaser should not send adapted or adjusted equipment for
repair to the sales company or national distributor in the country where the
appliance was originally marketed if the repair relates in any way to the
adaptation or adjustment).
This guarantee shall only be valid in territories subject to the laws of the
European Union and the EEA.
Please keep this guarantee with your receipt.
106
Personal Settings
Personal Settings
Use the table below to record your GSM/GPRS WAP settings.
Provisioning
Information
Setting No 1
Provisioning
Information
Setting No 2
Provisioning
Information
Setting No 3
Provisioning
Information
Setting No 4
Provisioning
Information
Setting No 5
Item
Name
Home URL
Linger time
Gateway IP
Non secure / Secure
(DeleteOne)
Security
Bearer Type
Circuit Switched (GSM)
Digital Dial #
Analogue Dial #
Circuit Type
User ID
User Password
Packet Switched (GPRS)
Access Point Name
User ID
User Password
Normal/Encrypted/None
(PAP) (Chap)
Authentication
107
Menu Structure
Personalise
Game
Phone Option
Language
Sounds
Game 1
Call Service
Call Divert
Security
Display Settings
Vibration Alert
Quiet Mode
Data Folder
User Messages
Answer Function
DTMF Length
Key Guard
Network
Browser
Schedule
Start Browser
Bookmark
Enter URL
Page Memo
Push Message
Browser Setting
Server List
Applications
Short Cut Key
Defaults
Games
Voice memo
Download Data
Clock Function
Calculator
Last Error
Phonebook
Browse
Create
Camera
Unit Converter
Infrared
Voice Command
Alert Profile
Group Setting
Review
Messages
SMS
My Profile
Hot Key Dial
MMS
E-mail
108
Licencing
Licencing
Tegic
CP8 Patent
T9® is a trademark of Tegic Communications Inc.T9® Text
Input is licensed under one or more of the following: U.S. Pat.
Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928, and
6,011,554; Canadian Pat. No. 1,331,057; United Kingdom Pat.
No. 2238414B; Hong Kong Standard Pat. No.HK0940329;
Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842
463 (96927260.8) DE/DK, FI, FR, IT, NL, PT.ES, SE, GB; and
additional patents are pending worldwide.
© Matsushita Mobile Communications Development of Europe
Ltd 2002
Information in this document is subject to change without
notice. No part of these instructions may be reproduced or
transmitted in any form or by any means without obtaining
express permission from Matsushita Mobile Communications
Development of Europe Ltd
0168
109
Notes
110
Index
Index
Changing to a New Network·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
69
14
51
38
54
48
42
50
Charging the Battery
·
·
·
·
·
·
·
·
·
·
·
·
Chat SMS ·
Clock ·
·
·
·
·
·
·
·
·
·
·
A
·
·
Activating the Browser·
Alert Profiles ·
Altering the Time/Date·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
80
27
39
19
18
Creating a New MMS Message ·
·
·
·
·
·
Creating a Text Message ·
Currency Convertor · ·
·
·
·
·
·
·
·
·
Answering a Call
Automatic Redial
·
·
·
·
·
·
Cut, Copy & Paste Message Text ·
D
B
Data Folder
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
70 - 75
76
Browsing the Phonebook
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
24
Deleting a Reminder·
Deleting Holiday Reminders·
77
C
Desktop Handsfree
·
·
·
·
·
·
·
·
88
Calculator ·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
41
Dialling Voice Dial Entries ·
29
Call Charges·
Call Duration·
63
Diverting Calls ·
·
·
·
·
·
·
·
·
·
·
·
·
65
62
DTMF Tones
·
89
Call Identification
64
Call Transfer·
Caller ID ·
·
·
·
·
67
E
·
·
19
Earpiece Volume
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
19
25
29
18
Camera Controls
84
Editing Phonebook Entries
Camera Operation·
Cell Broadcasts ·
84 - 87
51
Editing the Voice Dial Entries ·
·
Emergency Calls
·
·
·
·
·
·
·
Changing the Language ·
Changing the Ringtone
34
·
32
F
Changing the security codes
Changing the Wallpaper·
36
Fitting, and Removing the Battery ·
Fitting, and Removing the SIM
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
13
13
·
·
31
·
·
111
Index
Multimedia Message Service (MMS)
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
53
67
40
30
G
Multi-party Calls ·
Muting the Alarm
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
Grouping Phonebook Entries ·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
26
65
My Profiles·
·
·
·
H
N
Holding Calls and Call Waiting
Navigating Content
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
80
89
I
Note Pad
·
·
·
·
·
Important Information ·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
5 - 6
86
O
Incoming Calls during Camera Operation ·
Infrared
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
43 - 46
38
Operation During Two Calls ·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
66
14
24
Initially Setting the Home Time
Operation of Battery Level Indicator·
International Dialling·
·
·
·
·
·
·
·
·
·
·
17
Overwrite Protection·
·
·
·
·
·
·
·
·
Internet E-Mail ·
·
·
·
·
·
·
·
·
·
57
P
K
Parameters
Phone Lock
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
52
19
43
Key Guard ·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
36
Preparing for Infrared Connection ·
L
R
Last Error
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
83
14
Low Battery Warning
Recalling Voice Dial Entries ·
Receiving Data via Infrared Port
Receiving Text Messages ·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
29
44
49
35
36
24
M
·
·
·
Making Calls·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
17
Restoring the Default Phone Settings ·
Managing Message Lists
50
Restricting Calls ·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
Menu System
Messages ·
·
·
·
·
·
·
·
·
·
·
·
·
15
Retrieving a Number
·
47 - 60
112
Index
Using Voice Commands·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
28
S
SAR ·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
7 - 8
90
86
77
41
21
21
39
34
39
38
21
47
47
23
22
17
V
Second Clock ·
Self Portrait
Viewing Reminders
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
76
88
·
·
Voice Memo (Dictaphone)·
Setting a Holiday Reminder ·
Setting a Power On/Off Time
W
Setting Quiet Mode
·
·
·
·
·
WAP Browser ·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
79 - 83
Setting Ring and Key Volume ·
Setting the Alarm
·
·
·
·
·
·
·
·
·
Setting the Backlight Time·
Setting the Clock for Summer Time ·
Setting the Clock Format
·
·
·
·
·
·
·
·
·
·
·
Setting the Key Tone Type
Setting the Message Centre Number ·
SMS · ·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
Storing a number in the Mobile Phonebook ·
Storing a number in the SIM Phonebook
·
·
·
·
Switching the Phone On/Off ·
·
·
·
·
·
·
T
Taking a Picture ·
Text Entry ·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
84
·
·
·
92 - 93
81
The Browser Menu
U
Using the PIN ·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
20
113
The Serial Number can be found on the outside of the phone under the battery. For your convenience we recommend that you
note the following details as a record of your purchase.
Part Number
Serial Number
Dealer Name
Purchase Date
114
|