Panasonic EB GD92 User Manual

Operating Instructions

EB-GD92

Digital Cellular Telephone

Before operating this equipment please read these instructions completely.

Contents

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Fitting the SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Fitting the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Charging the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Getting to Know Your Phone . . . . . . . . . . . . . . . . . . . . . . . 3

Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Switching the Phone On/Off . . . . . . . . . . . . . . . . . . . . . . . . 6

Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Automatic Redial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Ending a Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Answering a Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Earpiece Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . 7

Locking the Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Using the PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Setting Vibration Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Setting Ring and Key Volume . . . . . . . . . . . . . . . . . . . . . . . 9

Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Store a Number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Browsing Phonebook. . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Retrieve a Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Editing Phonebook Entries . . . . . . . . . . . . . . . . . . . . . . . . 11

Grouping Phonebook Entries. . . . . . . . . . . . . . . . . . . . . . . 12

Using Alert Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Personal Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Hot Key Phone Numbers . . . . . . . . . . . . . . . . . . . . . . . . . 14

Service Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Review the Phonebook. . . . . . . . . . . . . . . . . . . . . . . . . . 14

My Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Personalising Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Add a Start-up Greeting . . . . . . . . . . . . . . . . . . . . . . . . . 15

Displaying Animations . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Changing the Ring Tone . . . . . . . . . . . . . . . . . . . . . . . . . 15

Disabling all Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Setting the Backlight Colour . . . . . . . . . . . . . . . . . . . . . . . 17

Selecting Vibration Alert Type . . . . . . . . . . . . . . . . . . . . . . 17

Changing the Language . . . . . . . . . . . . . . . . . . . . . . . . . 17

Restoring the Default Phone Settings . . . . . . . . . . . . . . . . . . 17

Phone Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Using Key Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Changing the Security Codes . . . . . . . . . . . . . . . . . . . . . . 18

Restricting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Currency Convertor. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Short Text Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Setting the Phone for Text Messages . . . . . . . . . . . . . . . . . . 24

Sending a Text Message . . . . . . . . . . . . . . . . . . . . . . . . . 24

Receiving Text Messages . . . . . . . . . . . . . . . . . . . . . . . . 25

Message Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Using Pre-defined Messages. . . . . . . . . . . . . . . . . . . . . . . 25

Manage Messages Lists . . . . . . . . . . . . . . . . . . . . . . . . . 26

Message Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Cell Broadcasts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Call Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Recent Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Call Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Call Charges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Call Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Advanced Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Diverting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Holding Calls and Call Waiting . . . . . . . . . . . . . . . . . . . . . . 31

Call Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Multi-party Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Changing to a New Network . . . . . . . . . . . . . . . . . . . . . . . 34

Internet E-mail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

E-mail Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Create a New Message . . . . . . . . . . . . . . . . . . . . . . . . . 35

Send/Receive Messages . . . . . . . . . . . . . . . . . . . . . . . . . 36

Read Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Store an Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Add a Signature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Manage Message Stores. . . . . . . . . . . . . . . . . . . . . . . . . 37

Additional Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Desktop Handsfree . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Voice Memo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Dicta Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

DTMF Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Note Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Second Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Accessory Related Features . . . . . . . . . . . . . . . . . . . . . . . 41

Text Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Important Error Messages . . . . . . . . . . . . . . . . . . . . . . . . 46

Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Safety Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

EU Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Getting Started

Thank you for purchasing this Panasonic digital cellular phone. This phone is

designed to operate on the Global System for Mobile Communications (GSM),

GSM900 or GSM1800. Ensure the battery is fully charged before use.

Before operating this phone please read the “Important Information” section -

see page 48.

These operating instructions detail use of the equipment contained in the Main Kit.

Some services detailed herein are network dependent or may only be available on a

subscription basis. Some functions are SIM dependent. For more information contact

your Service Provider.

Fitting the SIM

The SIM is inserted into the back of the

phone underneath the battery.

Place the SIM in the recess at the rear

of the phone (1) ensuring the bevelled

corner is positioned in the top right

corner. Slide the SIM to the left (2) using

light pressure until it is located under the

lugs and the SIM retaining clip has

clicked into position (3).

Removing the SIM

Ensure the SIM retaining clip is pressed

down (1) and while holding this down

slide the SIM to the right (2). Once clear

of the lugs the SIM can be lifted out of

the recess.

Fitting the Battery

Fit a fully charged battery pack. If the

battery pack is not fully charged then it

must be charged as described in the

“Charging the Battery” section.

Locate the top of the battery into the

rear of the phone (1). Push the bottom

of the battery into place until it locks into position (2).

Getting Started

Removing the Battery

Push the battery release latch down (1).

The base of the battery will raise out of

the recess (2). The battery can now be

removed from the phone (3).

Charging the

Battery

Connecting the AC

Adaptor

The battery pack must be attached to

the phone before the AC Adaptor is

connected. Insert the AC Adaptor plug

into the base of the phone (1).

Note: DO NOT force the connector as

this may damage the phone and/or the

AC Adaptor.

Connect the AC Adaptor to the mains power supply (2). Indicator will light and

charging starts.

Operation of Battery Level Indicator

While charging

Charging complete

Telephone on

Telephone off

Indicator off

When charging is complete remove the AC Adaptor.

Disconnecting the AC Adaptor

Disconnect the AC Adaptor from the

mains power supply (1).

Squeeze together the two buttons on

the plug of the AC Adaptor (2) and while

maintaining pressure extract the plug

from the base of the phone (3).

Getting Started

Low Battery Warning

When the battery power is low a warning tone will sound and a

blinking LOW BATTERY message will be displayed. If this

occurs during conversation finish your call immediately. The

power will be automatically shut off shortly after the warning

tone. Fully charge the battery pack or replace it with a fully

charged one.

LOW

BATTERY

Getting to Know Your Phone

Location of Controls

Antenna

Earpiece

Incoming/Charging

Indicator

Memo Key

Earphone/Microphone Socket

123

456

789

*0 #

Display

External Connector

Microphone

Navigation key – pressing up/down/left/right scrolls through options in the

main area of the display. Pressing left/right scrolls through options in the

option area of the display

Select key – selects an option in the option area of the display

accesses Phonebook or switches character types

provides instant access to one phone number (Personal Dial)

makes a call or recalls recently dialled phone numbers

clears the last digit entered, clears all digits when pressed and held or

returns to the previous display

ends a call or switches the phone on/off when pressed and held

Records and plays back recorded memos

Digit keys

and

– the

key will switch on and off

vibration alert

Getting Started

The Menu System

The menu system provides the means for accessing all the functions which do not

have their own dedicated buttons on the keypad.

The menu functions can be selected using a combination of the Navigation key

and the menu Select key

During a call a restricted menu will be available.

Shortcuts

In addition, once you are familiar with the layout of the menu you can use the keypad

to enter the Menu Number to quickly obtain the required function. For example,

pressing

to enter the menu and then 52will take you directly to the menu

for changing the ring tone. Examples in these instructions use the shortcuts to gain

access to the relevant functions or to the sub-menu under which other functions are

located.

Display Icons

Status Icons

Main Display Area

Option Area

Information Area

Navigation Prompt

Following some operations the display will automatically clear after three seconds or

after pressing any key.

Status Icons

The status icons are displayed according to the currently activated functions. The

Antenna, Signal and Battery icons are always displayed when the handset is

switched on and connected to a network.

lights when you are registered to a non-home network - roaming

lights when call divert is enabled

]

[

lights when vibration alert is enabled

lights when all tones or ring volume is off

Getting Started

blinks when an unread message is stored or lights when message area is

full

lights when phone lock is enabled

indicates that it is possible to make emergency calls

indicates the received signal strength:

- weak signal,

- strong

signal

indicates the battery level:

- full,

(blinking) - low battery

Information Area

This area is used to indicate the current top level menu, the sub-menu number, text

entry mode, Phonebook source, Phonebook location number, or the alarm set icon

depending on the current mode of operation.

indicates alarm is set

indicates current Phonebook entry is sourced from Mobile Phonebook

indicates current Phonebook entry is sourced from SIM Phonebook

Navigation Prompt

This area indicates the available directions in which the Navigation Key

can be pressed according to the current mode of operation.

Option Area

The Option Area displays the options which can be selected by pressing the Select

key (B).

Basic Operation

Switching the Phone On/Off

To switch the phone on or off.

GSM

Press and hold

to switch power on

A greeting animation will be displayed and then the phone will

go into Idle mode.

Press and hold

to switch power off

Making a Call

Ensure that the phone is switched on, the network operator

logo is displayed and the signal strength meter shows network

coverage is available in the current area.

Voice Call

Enter area code and phone number

Press

Hold

International Dialling

Using the automatic international access code (+) you will be able to dial international

numbers without having to know the code for the international exchange.

If the international number is known then it can be entered in the normal fashion

followed by the area code and phone number.

Press and hold

Press to cycle through the abbreviated international

names and press to select the required code

Enter area code and phone number

Press

until + is displayed

Country:

Note: Many countries include an initial “0” in the area code. This should, in most

cases, be left out when dialling international numbers. If you have difficulties making

international calls, contact your Service Provider.

Emergency Calls

To make an emergency call the antenna symbol (

S) must be present.

Enter 112Dor press when SOS is displayed in the option area

Basic Operation

Automatic Redial

When a call is unsuccessful the phone may ask if you want to

redial the phone number again automatically.

Auto Redial

00:24

Press

when Ok is displayed in the option area and

the display will countdown in seconds to the next redial.

Cancel

To stop redialling, press

the option area or press

when Cancel is displayed in

When a call is connected a beep will be emitted.

If a call is repeatedly unsuccessful you will not be able to automatically redial the

phone number. In this case you must redial the phone number manually.

Ending a Call

Press

Answering a Call

To receive a call the phone must be switched on and the signal strength meter must

be displayed.

Press any key except

Press to reject the call

If a call is not answered, or is rejected, the number of unanswered calls will be

displayed.

Press any key to clear the display

Caller Identification

This feature allows you to identify incoming calls and accept

or reject them. The caller’s phone number, and name if stored

Home

in Phonebook, will be displayed.

+0123456789

Note: Caller Identification may not always be available.

Earpiece Volume Control

The volume level may be adjusted during a call:

Press

to decrease the volume

to increase the volume

Ear

Volume

Volume control for Personal Handsfree accessory is adjusted

in the same manner.

Basic Operation

Locking the Phone

With the Phone Lock enabled you will be restricted to answer incoming calls and

make emergency calls only. The Phone Lock Code is factory set to “0000”.

From Idle mode press B 81to enter the Phone

Lock menu

Phone Lock

Enabled

Press

Enter the 4-digit code and press

The phone will be locked and the lock icon (

displayed.

O) will be

Unlocking the Phone

To restore normal operation, enter your Lock Code and press

. The lock icon will

be removed from the display. However, once you turn the phone off and on again you

will need to re-enter the Lock Code, and when the correct code has been entered Ok

will be displayed. Press

Disabling Phone Lock

From Idle mode press B 8to enter the Security menu.

Press

until Disable is displayed in the option area

Enter the Lock Code and press

Using the PIN

The PIN (Personal Identification Number) protects your SIM against unauthorized

use. If you enable the PIN, every time the phone is turned on you will be prompted to

enter the PIN.

The PIN2 controls security for the Fixed Dial Store and Call Charge metering.

Enabling/Disabling the PIN

From Idle mode press B 83to enter the PIN menu

Press to enable/disable the PIN

Enter PIN number

Basic Operation

Setting Vibration Alert

When vibration alert is switched on the phone will vibrate when a call is received.

Switching on vibration alert will silence the ring volume. However, when the ring

volume is adjusted after the vibration alert is switched on, the phone will ring and

vibrate when a call is received.

From Idle mode:

Press and hold

to switch on or off. When switched

on, the phone will vibrate briefly.

Setting Ring and Key

Volume

Changing either the ring volume and key volume is done in the same manner. If you

increase the ring volume above maximum it will set an escalating ring tone. If you turn

the ring volume off, the silent indicator icon (

[

) will be displayed.

From Idle mode press B 52to enter the Tones menu

Use

to select Ring Volume or Key Volume and press

to set the volume level and press

Phonebook

Phone numbers can be stored in two locations. You can store numbers in the SIM

Phonebook (therefore the number of locations, length of name and number of phone

numbers are SIM dependant). Alternatively you can store phone numbers in the

Mobile Phonebook, this means that if you change the SIM the numbers in the phone

are not lost.

The Mobile Phonebook has the advantage that you can group your phonebook

entries together.

Store a Number

To Store a Number in the SIM Phonebook

From Idle mode enter the phone number and press

Location:

(1-50)

Press to select the SIM Phonebook

Enter the name – see “Text Entry” page 42, and press

0-9

Any

Confirm phone number and press

Enter location number and press

You can choose not to enter a location number and the entry will be placed in the next

available location. Simply press when Any is displayed in the option area.

To Store a Number in the Mobile Phonebook

From Idle mode enter the phone number and press

Use to select the Mobile Phonebook and press

Enter the name - see “Text Entry” page 42, and press

Confirm phone number and press

If you wish to store an e-mail address with the current number then after confirming

the number press , enter the mail address and press

to select a group - see “Grouping Phonebook Entries” page 12 - into

which to place the entry and press

Enter location number and press

Use

You can choose not to enter a location number and the entry will be placed in the next

available location. Simply press when Any is displayed in the option area.

Phonebook

Overwrite Protection

If a location is occupied you will be prompted to confirm that you wish to overwrite the

current information.

Press

to overwrite the selected location

to choose another location number

Browsing Phonebook

You can search the Phonebook by either Name or Location. The default setting for

browsing is by name. When browsing by name pressing a lettered key will take you to

the first entry starting with that letter.

From Idle mode press B 2to enter the Phonebook menu

Use

to toggle between Names or Loc’ns display mode and press

to select the Phonebook you wish to browse and press

Retrieve a Number

From Idle mode:

Press

Use

to browse through the Phonebook

Once you have selected a phone number or name, there are a number of actions that

you can perform. To dial the selected number press

Note: The Phonebook you last viewed will be the default when you next press

. To

change the default, use the Phonebook menu to select a particular phonebook.

Speed Dial a Number Stored in SIM Phonebook

Enter location number – leading zeros may be left out

Press

Editing Phonebook Entries

You can Detail, View, Recall, Edit, Delete or Create in the Phonebook. To access any

of these functions you follow the same procedure. With a phone number or name

displayed:

Use

to cycle through Detail, View, Recall, Edit, Delete or Create

to select an option

Press

Phonebook

Detail

Displays each element of the selected Phonebook entry. Use

to display the

until Edit is

next/previous element of the entry. Each element may be edited - use

displayed in the option area and press

View

Displays an individual name and phone number in the names list.

If an e-mail address is present in the Mobile Phonebook this will be displayed along

with the name and number.

Recall

Displays the phone number, enabling you to either change it or call the number.

Edit

Displays the entry allowing you to make changes as required. Press

changes.

to save any

Delete

Deletes the entry from the Phonebook.

Create

Creates a new entry in the Phonebook

Grouping Phonebook Entries

The ability to group phonebook entries together is an extra function of the Mobile

Phonebook.

Retrieving a Number from a Group

Groups are used to collect together types of Phonebook entries, for example

business and personal. Each group can be suitably titled for quick access to the

entries contained within.

An alert profile can be attributed to groups, or a phone number, thus allowing

incoming calls to be tailored to indicate the type of caller.

From Idle mode press B 24to enter the Group Settings menu

Use

to select the group and press

to select the entry required and press

to recall the number.

Phonebook

Retitling Group Names

From Idle mode press B 24to enter the Group Settings menu

Use

to select the group

until Edit is displayed in the option area and press

Clear the current title and re-enter - see “Text Entry” page 42

Press

Using Alert Profiles

Alert Profile enables you to identify callers with a particular ring tone, display picture

and backlight colour, making it easier to distinguish between callers or groups of

callers.

Creating an Alert Profile

From Idle mode press B 23to enter the Alert Profile menu

Press to insert a new profile

Use to select Personal or Group and press

Recall the phone number / select group from the Phonebook – see “Retrieve a

Number” page 11 and press

Press

Use

to select the ring tone that you wish to use for this profile and press

to select the picture and press

to select the backlight colour and press

Personal Dial

The

key can be defined to recall your favourite phone number in preparation for

initiating a call.

Setting the Personal Dial Number

From Idle mode press B 28to enter the Personal Dial menu

Enter the name - see “Text Entry” page 42, and press

Enter the phone number and press

Using Personal Dial

From Idle mode:

Press

to recall the number, then press

to initiate a call

Phonebook

Hot Key Phone Numbers

It is possible to dial phone numbers from the Phonebook or Service Dial part of

Phonebook very quickly. Some Hot Key Phone numbers may be reserved by the

Service Provider, for example the first three Hot Key Phone numbers may be linked

to Service Dial (network dependent).

Press and hold a Digit key

Press

Setting the Hot Key Dial Source

From Idle mode press B 27to enter the Hot Key Dial menu

Use to select SIM Phonebook or Mobile Phonebook and press

Service Dial Numbers

Your Service Provider may program some special phone numbers into your SIM

(network dependent). It is not possible to modify the Service Dial numbers.

Press and hold

Press to browse through the Service Dial list of phone numbers

The phone number pointed to can only be recalled or dialled.

Review the Phonebook

The Review function in the Phonebook menu shows how many locations are

available in the Phonebook.

From Idle mode press B 25to enter the Review menu

Use to select SIM Phonebook or Mobile Phonebook and press

A summary of the selected Phonebook will be displayed.

Use to gain a detailed view of the Phonebook locations. Occupied locations

are shown with “ ”.

My Numbers

My Numbers is a convenient part of Phonebook where your voice, fax and data

phone number(s) can be stored and viewed. This function is SIM dependent.

From Idle mode press B 26to display the number

If more than one number is available then use

numbers

to cycle through the listed

Personalising Your Phone

Add a Start-up Greeting

A personalised greeting can be programmed for when the phone is switched on.

From Idle mode press B 531to enter the Greeting menu

Use the text entry facility to add your greeting and press

page 42

- see “Text Entry”

Displaying Animations

Animations can be displayed when the phone is switched on.

Animation

From Idle mode press B 534 to enter the

Animation menu

Theme

Use

Press

the animation

to cycle through the animated themes available

to select either the desired theme, or disable

Changing the Ring Tone

The ring tones of the phone can be changed to one of many pre-defined sounds or to

a voice ringer (a voice recording used as a ring tone).

Each of voice, fax, data and message can have a different ring tone.

Alternatively you can use the Melody Composer to generate your own ring tone.

Setting up a Pre-defined Ring Tone

You can choose from a selection of tones and melodies.

Voice Calls:

From Idle mode press B 523 to enter the

Ring Type menu

Type

Use

to cycle through the ring types

to select the desired ring tone

Press

Recording a Voice Ringer

From Idle mode press B 525to enter the Voice Ringer menu

Press and start speaking into the microphone to record your voice. The

recording will stop automatically after 5 seconds, or before if is pressed.

To playback the recording press

Personalising Your Phone

Composing a Melody

Up to 3 user-defined melodies can be created.

From Idle mode press B 524to enter the Melody Composer menu

Use to cycle through the melodies

Press to edit the chosen melody

Using the following table as reference, enter the notes (from the choice of low, middle

and high), rests, and the durations of each, to generate your composition.

At any time during composing press

to play back the current melody.

Once the composition is complete press

to save it.

1st

2nd

3rd

4th

5th

6th

Key

press

low C

low D

high E

low F

low G

low A

press

low C#

low D#

high C

high D

high C#

high D#

low E

low F#

low G#

low A#

high F

high G

high A

high F#

high G#

high A#

low B

rest

1/8

1/2

1/16

1/1

1/2

1/8

1/4

(duration)

1/16

Editing your Melody

Once the melody has been saved the following operations can be used for re-editing

purposes:

Press

Use

Use the relevant keys to insert new notes/rests

to delete the character to the left of the cursor

to navigate the cursor around the screen

Personalising Your Phone

Disabling all Tones

From Idle mode press B 521to enter the All Tones menu

Press to disable all tones and the silent indicator icon ( ) will be displayed.

[

Repeat the process to enable all tones.

Setting the Backlight Colour

From Idle mode press B 532to enter the Backlight Colour menu

Use

to cycle through the colours available

to select the desired colour

Press

Selecting Vibration Alert Type

The vibration alert facility may be set to vibrate continuously or intermittently.

From Idle mode press B 54to enter the Vibration Alert menu

Use to select the type of vibration desired and press

Changing the Language

It is possible to change the language that the phone uses for either the display

messages and/or for text entry.

From Idle mode press B 51to enter the Language menu

Use to select DisplayLanguage or Tegic Language (text entry) that you

wish to change and press

Use to select the desired language and press

Restoring the Default Phone Settings

Any personal settings can be returned to their factory default, with the exceptions of

the Phone Lock code and the Language.

From Idle mode press B 57to enter the Defaults menu

Press to restore the default settings

Phone Security

The phone features a number of security functions that protect against unauthorized

use, and enable you to restrict access to certain features - see “Using the PIN” page

8. It is recommended that you memorize your security codes. If you need to make a

note of your security codes, never write them in a way that they can be recognized by

another person. If you forget them contact your dealer for the Phone Lock Code or

your Service Provider for PIN and PIN2.

Using Key Guard

The Key Guard function is used to prevent any keys from

being accidentally pressed e.g. when the phone is being

GSM

carried.

From Idle mode press

Guard

three times to enable Key

Free

When

call is received Key Guard will be disabled

temporarily, allowing you to press any key to answer the call. Emergency calls can

still be made.

Disabling Key Guard

When Free is displayed in the option area press

twice

Changing the Security Codes

From Idle mode press B 8to enter the Security menu

Use

to select Phone Lock, PIN or PIN2

until Change is displayed in the option area and press

Enter the current code and press

Enter the new code and press

Verify the new code and press

Phone Security

Restricting Calls

Call Barring

The Call Bar function is used to restrict certain outgoing and/or incoming calls. Call

Bar is controlled by a security password that is supplied by your Service Provider.

When updating or checking the status of Call Bar the phone must be registered with a

network. Different Call Bar restrictions can be used for voice, fax and data calls. Any

combination of call restrictions can be set.

From Idle mode press B 82to enter the Call Bar menu

Use

to select Bar Voice, Bar Fax or Bar Data and press

to the select level of call barring that you wish to apply and press

Enter Call Bar password and press

Barred Dialling

The Barred Dial function enables you to bar all phone numbers pre-programmed in

the SIM from being dialled on the phone. To use this function PIN2 is required.

From Idle mode press B 86and press

PIN2 and press

Bto enable Barred Dial , enter

Fixed Dial

The Fixed Dial Store is part of Phonebook, but with additional security. When the

security feature Fixed Dial is enabled it is only possible to make calls with phone

numbers that are in the Fixed Dial Store.

When Fixed Dial is enabled any manually dialled phone numbers must match a

phone number in the Fixed Dial Store.

To store, edit or delete a phone number in the Fixed Dial Store the Fixed Dial

function must be enabled. With Fixed Dial enabled, all phone numbers can be

added, edited or deleted as normal, but you will be prompted for PIN2.

“Wild” Numbers

Wild numbers are spaces that can be stored in a phone number. The “wild” numbers

must be filled before the phone number is dialled. Used in conjunction with Fixed Dial

calls can be restricted, for example, to a specific area by storing the area code of a

phone and when recalled the remainder can be added. The “wild” numbers can be

anywhere within a stored phone number.

Press and hold

number

until _ is displayed to enter a wild

When the phone number is recalled pressing a numeric

key will fill in a “wild” number.

+0123_56_

Applications

Clock

This phone incorporates a clock with date/time, an alarm and a power on/off feature.

A second clock for dual time is also included - see “Second Clock” page 41.

Initially Setting the Home Time

From Idle mode press B 41111 to

enter the Time Set menu and press

Use to select whether you require Summer Time

setting on or off and press

Enter the digits for the date in the format day/month/year

and press

Enter the digits for the time using 24 hour clock and press

Time:

HH:MM

0-9

Setting the Clock Format

From Idle mode press B 4122 to enter the Display Format

Press

to cycle through the different clock and/or date formats

to select the desired clock display type

Altering the Time/Date

From Idle mode press B 41111to enter the Time Set menu

and press

Press and hold

Enter the digits in the format day/month/year

Press to accept the date

Press and hold to remove the current time

Enter the digits using 24 hour clock and press

to remove the current date

Setting the Clock for Summer Time

From Idle mode press B 41112to enter the Summer Time

Press

to set Summer Time on.

If Summer Time setting is on then press

to turn it off

Applications

Setting the Alarm

If you have not already set the clock, you will be prompted to do so prior to setting the

alarm.

There are four separate alarms, each of which may be set independently.

From Idle mode press B 413 to enter the

Alarm Set menu and press

Use to select the alarm to be set and press

Enter the digits for the time and press

Alarm:

Repeat Daily

Use

to select the frequency of the alarm and press

Use

to select the ring type and press

Once the alarm has been set,

will be displayed in the information area when the

phone is in Idle mode.

The alarm is activated in accordance with the current clock (Home or Visitor)

Muting the Alarm

When the set time is reached the alarm will sound and the display will flash with an

alarm message. The alarm will sound for 30 seconds. If the alarm is due during a call,

it will activate vibration alert.

To end the alarm:

Press any key

Disabling the Alarm

From Idle mode press B 413 to enter the Alarm Set menu and

press

Use

to select the alarm to be disabled and press

until Disabled is displayed and press

twice

Once disabled, following the same procedure will re-enable the alarm.

Adjusting the Alarm Time

From Idle mode press B 413 to enter the Alarm Set menu and

press

Use

Press and hold

Enter the digits for the time and press

Press to select the frequency of the alarm and press

Use to select the ring type and press

to select the alarm to be adjusted and press

to remove the current alarm time

Applications

Setting a Power On/Off Time

You can set your phone to turn itself on or off automatically at a specified time using

the Power On/Off feature. The procedure for setting/adjusting the Power On/Off

automatically is similar to that for setting the time on the clock. For either setting or

adjusting the time you need to select Power On Time or Power Off Time in the

Clock Function menu.

Caution: Ensure that the setting of the Power On function will not contravene any

regulations whereby it may automatically power on when in an aircraft or medical

facility etc. - see “Important Information” page 48.

Calculator

The four function calculator will enable you to perform simple arithmetic calculations

(addition/subtraction/multiplication and division).

From Idle mode press B 42to enter the Calculator menu

Enter a number (maximum 10 digits) and it will be displayed on the lower line

Use

perform (

subtract)

to select the arithmetic operation you wish to

to multiply, to add, to divide, to

123

+ 10

Enter a number (maximum 10 digits) and it will be

displayed next to the operation symbol

If you use

to select another arithmetic operation to

perform, an intermediate calculation will be performed and the result displayed

on the upper line

Press

to complete the calculation when = is displayed in the option area

to add a decimal point.

Note: Press and hold

Currency Convertor

The currency convertor enables you to convert from/to a home currency using a

conversion rate that you enter.

From Idle mode press B 43to enter the Currency menu

Entering an Initial Conversion Rate

Press

Enter a country code for the home currency (up to 3

characters) and press

Enter a country code for the foreign currency (up to 3

characters) and press

Enter the currency conversion rate and press

Currency/Rate:

___ => ___

0.00

Edit

Applications

Note: Press and hold

to add a decimal point.

Converting a Value

Check the conversion rate is the one you require and press

Enter the value to be converted and press

The country code and currency rate will be retained in the phone once entered. The

next time you use the convertor you can edit the conversion rate/country codes while

in the Currency/Rate display. Use

press

until Edit is displayed in the option area and

Swapping the Currency Conversion

When you have accepted the conversion rate and are ready to enter the value to be

converted, you can swap the currencies to convert from the foreign currency into the

home currency.

Use

until Swap is displayed in the option area and press

Enter the value for conversion and press

Short Text Messages

You can receive, display, edit and/or send short text messages, of up to 160

characters to mobile phones on the same network or any network that has a roaming

agreement.

Setting the Phone for Text Messages

Before you can send a message you must enter the Message Centre number into

Parameters (your Service Provider will supply the Message Centre number).

The Message Centre number may have been preprogrammed, on your SIM card.

Setting the Message Centre Number

From Idle mode press B 3163 to enter the Message Centre

menu and press

Enter message centre number in international dial format – see “International

Dialling” page 6

Sending a Text Message

From Idle mode press B 313 to enter the

Create menu and press

Enter the message (up to 160 characters) – see “Text

Entry” page 42 and press

You will be prompted if you wish to send the message, if you

Hello_

do not wish to send the message press

be stored.

C, the message will

Press

Phonebook) - see “Retrieve a Number” page 11 and press

Press

You may be asked if you wish to have delivery confirmation, if you want

confirmation press . If you do not, use until No is displayed in the option

area, then press

and enter the destination phone number (or recall a number from the

The default setting for delivery confirmation can be enabled/disabled using the

Report parameter in the Short Message menu.

Use

to select a melody type, if required, and press

Short Text Messages

Receiving Text Messages

When a Short Text Message is sent to your phone the message indicator (

N) will

blink in the display, with an audible tone or vibration. This indicates that a new

message has been received.

When Read is displayed in the option area press

to read

Received

New

Message

the message. Use to navigate through the message and

to identify the sender of the message.

Note: If the message indicator is displayed constantly (does

not blink) this indicates that the message area is full and you

will need to delete old messages in order to be able to receive

new messages in the future.

Read

Message Options

Reply to a Message

When you have received and read a message you may wish to reply to the sender.

This is the default setting in the option area and pressing

reply message.

Bwill allow you to create a

Delete a Message

While reading a message use

until Delete is displayed in the option area. Press

twice to delete the message. To enable the auto-deletion of messages - see

“Message Parameters” page 27.

Edit a message

While reading a message use

until Edit is displayed in the option area. Press

and make any amendments. Pressing

will give you the option to send the edited

message - see “Sending a Short Text Message” page 24. Press

Cif you do not wish

to send the message and it will be stored in the Send List.

Using Pre-defined Messages

Pre-defined messages can be sent immediately or they can be used as a basis for a

longer message and edited accordingly.

From Idle mode press B 313to enter the Create menu

Use

to point to the pre-defined message you wish to use and press

Use

to navigate through the message and add any extra text – see “Text

Entry” page 42

When complete the message can be sent - see “Sending a Text Message” page 24

Short Text Messages

User Defined Message

Creating a User Defined Message

It is possible to create a user defined message which, once generated, can be used

as any other pre-defined message.

From Idle mode press B 314. Edit the message as required and

press

Selecting the User Defined Message

From Idle mode press B 313

The user defined message will be displayed at the top of the list of pre-defined

messages.

Use

until the

prompt is adjacent to the message and press

Changing the Pre-defined Message Language

With the pre-defined message highlighted:

Use

to select Lang in the option area and press

to select a language and press

until Select is displayed in the option area and press

twice to send

the message

Manage Messages Lists

All messages, whether sent or received, will be stored on the SIM until they are

deleted. Selecting a stored message allows it to be replied to, edited or deleted.

Receive List

Messages received will be stored in the Receive List. A blinking “•” indicates an

unread message.

When reading a message the sender’s information is displayed below the text

indicating the time the message was sent and the message centre number. Pressing

allows you to reply to the message.

Send List

When a message has been sent or edited it will be stored in the Send List.

Review

Review allows you to check usage of the message area.

Short Text Messages

Message Parameters

From Idle mode press B 316to enter the Parameters menu. The

following parameters can be set:

Auto Delete

When set will erase messages automatically:

Received Read - will overwrite the oldest read message

Received Any - will overwrite the oldest message even though it may not have been

read.

Lifetime

This is the duration that your message is stored at the Message Centre. Delivery

attempts will be repeated until the message has been delivered or the Lifetime

expires.

Message Centre

Allows the Message Centre phone number to be edited - see “Setting the Phone for

Short Text Messages” page 24.

Report

When your message has been delivered a confirmation will be received if Report is

set to Yes.

Protocol

The Message Centre may be able to convert the message to the format specified by

the selected protocol.

Cell Broadcasts

Cell broadcasts are general information that is sent to your phone by a network

operator. The information can include topics like local traffic reports, weather etc.

Setting Broadcast Topics

You need to specify the topic(s) of information that you wish to receive as broadcasts

before you can receive them.

From Idle mode press B 3173to enter the Topics menu

When Insert is displayed in the option area press

Use to cycle through the available topics and press

currently displayed topic into your broadcast list

to insert the

Short Text Messages

Enabling/Disabling Broadcasts

From Idle mode press B 3171to enter the Receive menu

Press

Once enabled, following the same procedure will disable broadcasts.

Message List

This is a store for the last received broadcast messages. Messages can be deleted

from here.

Language

The Language in which broadcast messages are displayed can be changed

(network dependent).

Call Information

Recent Numbers

Recently dialled phone numbers will be stored in Last Dialled.

If Caller Identification is available the caller’s phone number for an answered call will

be stored in Answered and an unanswered call will be stored in Unanswered.

If Caller Identification is not available then calls will still be stored but will have the

date and time attributed to them.

When the store is full the next phone number will overwrite the oldest.

Press

Use

to select Last Dialled, Answered or Unanswered and press

to select the phone number (or name) you wish

to redial and press

Last Dialled

Answered

Unanswered

You can edit or delete the phone number before dialling – see

“Editing Phonebook Entries” page 11.

Select

If you wish to store the selected number in Phonebook, press

while the number is displayed – see “Store a Number”

page 10.

Calling the Last Dialled Number

To redial your last called phone number press D D

Returning an Unanswered Call

When the display shows that you have received calls but not answered them.

Press

The last caller’s phone number will be displayed if it is available

Press

eto select the phone number you wish to dial

Call Duration

From Idle mode press B 6to enter the Call Service menu

Use to select one of the functions described below, and press

The Last Call function will display the duration and call charge, if available, of the last

call during Idle mode or the current call during a call. Times are indicated as: hours

(0-99), minutes (0-59), seconds (0-59) - HH:MM:SS.

The All Calls function displays the accumulated duration and call charge, if available,

of incoming and outgoing calls. The lock code or PIN2 is required to reset the timer

and call charge.

Call Information

Call Charges

To maintain control over the cost of calls that are made, the phone can be set to

restrict use to a finite number of units overall.

Setting the Unit Price

Firstly, a price per unit must be entered. This is the cost that the Service Provider

charges for one unit of call time.

From Idle mode press B 662to enter the Price/Unit menu

Press to edit the values

At this point you will be asked to enter your PIN2.

Enter a currency unit (up to three characters) and press

Enter a price and press

Setting the Maximum Unit Level

From Idle mode press B 663to enter the Max Cost menu

Press to edit the values

At this point you will be asked to enter your PIN2.

Enter a value (number of units) which is to be the maximum permitted, and the

corresponding cost will be displayed

Press

to accept

Note: The duration of one unit may vary during the day, peak and off-peak times.

Therefore, the call charge can be calculated accordingly. However, call charge

information may not give an accurate reflection of the tariffs charged by your Service

Provider.

Setting a Warning Level

A warning can be set as an indication that the maximum cost is about to be reached.

From Idle mode press B 664to enter the Warning at menu

Press to edit the value

Enter a value (in units) at which time you would like the warning to sound and

press

Call Identification

In the Call Service menu, the Caller’s ID and Withhold ID functions allow you to

check the status of whether a Caller’s Identification is sent or can be received.

Note: When checking the status the phone must be registered with a network.

Advanced Operation

Diverting Calls

Voice, fax and data calls can be diverted using different circumstances and to

different numbers. For example you may wish voice calls to be diverted to Voicemail

in the event that the phone is switched off.

From Idle mode press B 7to enter the Call Divert menu

Use

to select the type of calls to divert and press

to select the circumstances to initiate the divert and press

Enter phone number to divert to and press

When a divert situation is enabled the divert icon (t) is displayed.

When updating or checking the status of Call Divert the phone must be registered

with a network.

Holding Calls and Call Waiting

Holding/Resuming a Call

Press

when Hold is displayed in the option area

Press

when Resume is displayed in the option area

Making a Second Call

Enter phone number (or recall from Phonebook – see “Retrieve a Number” page

11)

Press

The first call will be placed on hold.

Receiving a Second Call

A second call can be received, if Call waiting is switched on. This is enabled from the

Call Service menu. It is not possible to have more than one fax or data call. All voice

calls must be ended before you can make or receive a fax or data call.

Accept a Second Call

Press

when Accept is displayed in the option area

The current call will be placed on hold.

Reject a Second Call

Press

to display Reject in the option area

Press

Advanced Operation

End Current Call and Receive Second Call

Press

with a waiting call

Press any key except

Operation During Two Calls

Swapping Between Calls

The

prompt indicates the current call

Press

when Swap is displayed in the option area

End Current Call

Press

to display End in the option area

Press

The held call will remain held.

End Both Calls

Press

Call Transfer

With two calls connected, Call Transfer enables you to connect them together ending

your connection, leaving the other parties to talk together without you.

When you have two calls:

Press

to display Trans. in the option area

The two calls will be connected to each other and your call will be ended.

Note: Two call transfer cannot be utilized while in Multi-party mode.

Multi-party Calls

A Multi-party call enables three to five people to be in conversation at the same time.

It is possible to swap between a Multi-party call and another call in the same way as

with two separate calls.

Enabling Multi-party

With two calls connected (one active, one on hold):

Press

to display Merge in the option area

A Multi-party call has been enabled, all three people will be able to talk to each other.

Advanced Operation

Adding to Multi-party

You can add to the Multi-party call (up to a maximum of five). Either by making a call

or accepting an incoming call. The call can then be merged into the Multi-party.

Note: When making a call or accepting an incoming call the Multi-party call will be

placed on hold. The callers in the Multi-party call can continue to communicate with

each other while on hold.

Splitting a Multi-party

You can select an individual from the Multi-party and remove their connection. This

enables you to talk privately without the participation of the rest of the Multi-party.

During a Multi-party call:

Use

until Option is displayed in the option area and press

Press

to select a caller in the Multi-party

to display Split in the option area

The selected caller will be split from the Multi-party call and the Multi-party call will be

placed on hold (the remaining Multi-party call callers can still communicate).

Ending Multi-party Calls

You can either select an individual in the Multi-party and end the call or end the entire

Multi-party call. If a call is held, or an other call is incoming then an individual call

cannot be ended.

Ending a Single Connection

During a Multi-party call

Press

to display Option in the option area and press

to select a caller in the Multi-party

to display End in the option area

Ending a Multi-party Call

During a Multi-party call:

Press

to end all the calls at once

Advanced Operation

Changing to a New Network

When not in your home country you may use a network that you do not directly

subscribe to, this is called ROAMING. National Law may not permit roaming in your

home country.

The New Network function is used to manually select a network that is available in

your current location.

From Idle mode press B 91to enter the New Network menu

Use to select one from the list of available networks and press

An X will be displayed in the information area if you cannot register with the selected

network.

When the Search Mode is set to Automatic the phone will automatically reselect a

new network in order to maintain optimum network availability. With the Search

Mode set to Manual the phone will only use a selected network. If coverage is lost

another network should be selected.

The Network List is used when the Search Mode has been set to Automatic. The

location numbers in the Preferred Network List show the search priority.

Selecting Insert stores a new network in the currently displayed location and then

moves other networks down, Edit overwrites the old network with a new one, and

Add stores a new network at the end of the list

Internet E-mail

Using the E-mail function you can send and receive e-mail messages to the mail

server of an Internet Service Provider.

E-mail Setup

Before you can send and receive e-mail messages, your SIM must be data enabled

and a contract must be set up with an Internet Service Provider and the relevant

configuration information, supplied by the provider, entered into the phone.

From Idle mode press B 32to enter the E-mail menu

Use

to select Parameters and press

to select Server Settings and press

Up to three Internet Service Providers may be setup

Use until Create is displayed in the option area and press

A list of configuration parameters will be displayed. The parameter Profile Name will

be highlighted and Edit will be displayed in the option area

Press

Enter the name of the Internet Service Provider and press

Use to select each of the other parameters in turn and press

enter the information

Press and select the next parameter in the list

After all parameters which have been supplied by the Internet Service Provider

have been entered, use until Save is displayed in the option area and press

to store the settings

in order to

Record your e-mail settings in the table on the inside rear cover of this booklet

for easy reference. For additional information about setting up the Internet

E-mail see http://www.user.mci.co.uk

Create a New Message

From Idle mode press B 32to enter the E-mail menu

Use

to select Create and press

Enter the relevant details in the To, CC, Subject and Message fields, using

to navigate between them.

Note: The To and CC fields must be entered using previously saved mail addresses

in the Phonebook, retrieved in the normal fashion.

After entering the necessary information press

Use until Save is displayed in the option area and press

Internet E-mail

Send/Receive Messages

The Send/Receive function is used to both send messages created on the phone to

the server of the Internet Service Provider, and to check your mailbox on the server

for incoming messages and download them to the phone at the same time.

From Idle mode press B 32to enter the E-mail menu

Use until the Send/Receive function is highlighted and press

If there are unsent messages in the Outbox you will be prompted to send them.

Press to send any unsent messages.

If there are new messages to download to the phone then you will be prompted to

receive them.

Press

to receive new messages.

If no action is taken the connection will time out after one minute and return to the

E-mail menu.

If any messages are downloaded then, when finished, the phone will display the new

messages allowing them to be viewed, replied to etc.

If no messages are downloaded the phone will display the Inbox menu, unless there

are no messages in this list, then it will return to the E-mail menu.

Read Messages

From Idle mode press B 32and press

to enter the Inbox menu

to scroll

to read the current message.

The header fields of the most recent messages will be displayed. Use

through previous message headers and press

Message Status

A message can be in one of four states. The current state of each message is

indicated by an appropriate icon:

No icon indicates a message which has been read or sent.

Indicates an unread or unsent message

Indicates that the message has been locked

Indicates a broken message (either a message too long for the phone or a

message which contains an attachment)

While reading a message any of the following operations may be performed by using

the

key until the relevant operation is displayed in the option area and pressing

Compose a reply to the sender of the current message

Internet E-mail

Forward

Send the current message to a different person other than the sender

Delete

Remove the current message from the list

Lock

Apply a lock to the message so that it cannot be overwritten when receiving further

messages. A locked message can still be deleted manually.

Store an Address

An e-mail address can be stored in the Mobile Phonebook - see “Store a Number”

page 10

Add a Signature

This Signature function enables a pre-defined signature to be added to your

outgoing e-mails. Once the signature has been setup, each time a new e-mail is

created it will have the signature automatically inserted.

Setup Signature

From Idle mode press B 32to enter the E-mail menu

Use

until the Parameters function is highlighted and press

until the Signature function is highlighted and press

Enter the text for your required signature – see “Text Entry” page 42 and press

Manage Message Stores

Once the Inbox and/or Outbox store are full any new messages received or created

will overwrite existing messages from the oldest first. To prevent messages being

overwritten each list should be maintained deleting any messages which are no

longer required. Important messages can have a lock applied to them so that they

cannot be overwritten when the Send/Receive process is activated.

Additional Features

Desktop Handsfree

Desktop Handsfree enables you to hold a conversation without having to hold the

phone to your ear.

Note: Do NOT hold the phone to your ear in Handsfree mode.

Swapping Between Handsfree and Handheld Calls

During a Handheld call:

Use

to until H’free is displayed in the option area

Press

During a Handsfree call:

Press to revert to Handheld operation

Answering a Call Handsfree

Pressing and holding

will allow the call to be answered Handsfree.

Voice Memo

You can record a two-way conversation for up to 18 seconds during a call. There are

two separate areas for voice memo messages (Voice Memo 1, Voice Memo 2)

allowing you to record two separate voice calls. If a different SIM is installed any voice

memos will be lost.

Caution: Security of a recorded message is your responsibility. You MUST ask for

the other party’s consent before recording.

Record a Voice Memo

Press

during a call

A tone will sound when recording starts. When the recording stops

a tone will sound to you.

If you press

while recording a voice memo, recording to the

current voice memo area will stop. Pressing

recording in the other voice memo area.

again will start

is pressed when the two voice memo areas are occupied,

the older recording will be overwritten by the new memo.

Additional Features

Play Back a Voice Memo

Press

from Idle mode:

If there are two voice memos recorded they will both be played back continuously. To

swap playback between the two voice memos areas press

If there is no recording two tones will sound.

during playback.

To stop playing, press

The Note Pad function is available during playback - see “Note Pad” page 40.

Volume Control During Playback

While playing back:

Press

to adjust the volume of the voice memo

Delete Memo

Press

twice during playback

Dicta Phone

The dicta phone facility allows two voice messages (of up to 10 seconds each) to be

recorded, for later playback. If a different SIM is installed any voice messages will be

lost.

Recording a Message

Press and hold

key when in Idle mode

When ready, press

message.

and speak clearly into the microphone to record your

Play Back a Message

Press and hold

Use to select Playback and press

To play the most recent message press

To play the other message use to select the second message in the list and

press

key when in Idle mode

Delete a Message

While the message is playing or message list is displayed press

twice

Additional Features

DTMF Tones

DTMF tones can be sent during conversation. These are often used to access voice

mail, paging and computerized home banking. For example, you may need to input a

number to remotely access voice mail messages. A phone number may be stored in

the Phonebook with DTMF tones, allowing the number to be dialled upon recall and

the DTMF number to be sent automatically.

Send DTMF Tones During a Call

Enter digits (0 to 9, # and *)

Pause Dial

Using pauses allows you to send DTMF tones automatically.

Enter phone number

Press and hold

until a P is displayed

Enter DTMF digits after the pause, e.g. enter the number

to access voice mail messages.

+01234P6

Press

When the call is successful DTMF tones will be sent after 3

seconds or when is pressed.

If the DTMF tones are unsuccessful then the destination of your call may require that

the length of the tones be increased.

From Idle mode press B 56to enter the DTMF Length menu

Use to set to Long and press

Note Pad

During a call you can enter numbers which you may wish to dial when the call has

ended.

During a call:

Enter phone number

When the call has ended press

to call that number

To store in Phonebook, press

Number” page 10.

while the number is displayed – see “Store a

Additional Features

Second Clock

The Second Clock can either be set to auto-adjusting, whereby the second time will

be automatically set from the country code of the current network, or a specified time

difference can be set manually.

Setting Clock Display

From Idle mode press B 4121to enter the Display Pattern menu.

Use

to select either Second Time or Home Time and press

Setting Auto Adjustment

If you travel to a country which has a roaming agreement with your home network,

your Second Clock will be automatically adjusted. However, for countries which have

several time zones in the same country manual adjustment is required.

From Idle mode press B 411232 to enter the Auto

Adjustment menu.

Use

to select home country and press

Enabling Auto Adjustment

From Idle mode press B 411231 to enter the Auto

Adjustment menu and press

Repeat to disable Auto Adjustment.

Setting Manual Adjustment

From Idle mode press B 41121 to

enter the Time Difference menu.

Time Difference:

03:34 28/02/00

+2.0 hour

Use

to select the time difference required and press

to set the value

Set

Setting Summer Time

From Idle mode press B 41122to enter the Summer Time

menu.

Press

to set Summer Time on

Once enabled, following the same procedure will disable Summer Time.

Accessory Related Features

When Auto Answer is switched on, and Personal Handsfree is connected, a call will

be answered without pressing any keys.

This is also applicable to the Handsfree Car Kit accessory.

See the documentation provided with the relevant Accessory for operational

details.

Text Entry

The phone provides a means for entering alphanumeric characters to enter details

into the Phonebook, to create text and e-mail messages etc. This section details the

characters that can be entered and the relevant keys to press.

Text Mode

Normal

Greek

Extended

(W)

Numeric

(0-9)

T9^®

Key

)

(

)

Alternatives

0+P_

Punctuation space”@,.;:!¡?¿()[]{}’&%+-/\^~|<>=€£$¥¤§

ABG

abc

def

ABCabc

DEFdef

AÄÅÆBCÇaäåæàbc

DEÉFdeéèf

GHIghiì

DEZ

HQI

ghi

GHIghi

KLM

NXO

PRS

TUF

CYW

jkl

JKLjkl

mno

pqrs

tuv

MNOmno

PQRSpqrs

TUVtuv

MNÑOÖØmnñoöøò

PQRSpqrsß

TUÜVtuüùv

WXYZwxyz

wxyz

WXYZwxyz

Shift/Lock*

Space

* Press

case). Pressing

once to enter a single capital letter (subsequent characters will be lower

twice acts as a keyboard CAPS LOCK function and subsequent

characters will be uppercase, until

lowercase character entry.

is pressed for a third time returning to

T9^®Text Input

Using this mode of text entry dramatically reduces the number of key presses

required:

Press a key once for any letter you require on that key. The desired letter may not

be displayed. Continue pressing other keys until the end of a word is reached; then

check that the word has been typed correctly before continuing on to the next word.

Text Entry

If the combination of letters typed has produced a word which is not the one you

require, press

next word.

repeatedly until the correct word is displayed. Continue to the

If the word you require is not in the internal dictionary (i.e. It is a proper noun or a

rarely used word) then it should be entered using the Normal (

U) mode.

Other Text Modes

To access any of the other text entry modes use

to cycle through until the desired

mode is displayed in the Information Area.

When using Normal (

U), Greek (V) or Extended (W) text entry modes, each

time a key is pressed in quick succession it will display the next character available on

that key (or if the key is pressed and held down it will cycle through the available

characters). Releasing the key, or pressing another key will enter the currently

displayed character and the cursor will move to the next position.

Editing Text

Pressing

will move you up or down one text line (or field in Phonebook). Pressing

will move you left or right one character (or to the first character of the previous or

next word when using T9^®text entry mode). When the cursor is moved over a

character and another key pressed this will insert the new character immediately

before the selected character. Pressing

will delete the character to the left of the

cursor or delete the current line when pressed and held.

T9^®is a trademark of Tegic Communications Inc.

Menu Structure

From Idle mode pressing

will display a menu of phone features. To select a

feature press

then press

so that the pointer is showing next to the feature that you require

To exit the current menu and return to the previous level press

. To exit completely

out of the menu structure, press and hold

, or

(except during a call).

1 Key Guard

2 Phonebook

Browse

Create

Receive List

Send List

Create

User Defined Msg

Review

Alert Profile

Group Setting

Review

My Numbers

Hot Key Dial

Personal Dial

Parameters

Broadcasts

3 Messages

Short Message

E-mail

Inbox

Outbox

Create

Send/Receive

Review

Parameters

Clock Set

Clock Format

Alarm Set

Power On Time

Power Off Time

Clock Function

Calculator

Currency

4 Applications

Home

Second

Display Pattern

Display Format

Display Language

Tegic language

Language

Tones

5 Personalise

All Tones

Ring Volume

Ring Type

Melody Composer

Voice Ringer

Key Volume

Warning Tone

Greeting

Display Setting

Vibration Alert

Auto Answer

DTMF Length

Defaults

Backlight Colour

Contrast

Animation

Last Call

All Calls

Call Waiting

Caller’s ID

Withhold ID

Call Charge

6 Call Service

7 Call Divert

8 Security

Voice Calls

Fax Calls

Data Calls

Cancel All

Status

Phone Lock

Call Bar

PIN2

Fixed Dial

Barred Dial

Bar Voice

Bar Fax

Bar Data

Cancel All

Status

Cost Left

Price/Unit

Max Cost

Warning at

Password

New Network

Search Mode

Network List

9 Network

Trouble Shooting

Should any problem persist contact your dealer.

Problem

Cause

Remedy

Check that the Battery Pack is fully

charged and correctly connected to

the phone

Telephone will not

switch on

The network you are

using and the

condition of the

battery pack can

affect battery life

Extremely short

battery life for a

new battery pack

Short battery life

for an old battery

pack

The battery pack has

worn out

Replace with a new one

When the Battery

Pack has been

The charging

Leave the phone charging the

Battery Pack for a few minutes

indicator does not

light and the phone

cannot be switched

on when charging

deeply discharged

the phone will take a before the indicator is lit and

short time until the

indicator lights

attempting to switch it on

The phone is locked

Unlock the phone

Outgoing calls are

barred

Disable the outgoing call barring, or

barred dial

Calls cannot be

made

The phone is not

registered to a

network

Move to a coverage area and

operate your phone after it has

registered with a network.

Check your SIM supports Fixed

Dial

Check if the Fixed Dial is switched

Check the phone number is stored

in the Fixed Dial

Calls cannot be

made from Fixed

Dial Store

Trouble Shooting

The phone is not

switched on

Switch the phone on

Incoming calls are

barred

Calls cannot be

received

Disable the incoming call barring

The phone is not

registered to a

network

Move to a coverage area and

operate your phone after it has

registered with a network.

Check that the antenna symbol

is displayed - move to a coverage

area and operate your phone when

the antenna symbol is displayed

Emergency calls

cannot be made

You are not in a

GSM coverage area

Telephone

The phone is locked

Unlock the phone

numbers cannot be

recalled from

Phonebook

Phone number has

been restricted

Switch off restriction

Important Error Messages

These are some of the most important error messages which may be displayed:

Area Not Allowed

Roaming in the selected area is not allowed

Network Not

Allowed

Roaming with the selected network is not allowed

The network has detected an authentication failure

because your SIM is not registered with that network -

contact your Service Provider

Security Failure

SIM Blocked /

Contact Service

provider

The SIM is blocked because one of the PIN/PIN2

unblocking keys (PUK/PUK2) has been entered incorrectly

ten times - contact your Service Provider

The phone has detected a problem with the SIM - switch

the phone off and then back on; if the message is still

displayed contact your Service Provider

SIM Error

The SIM has failed one or more of the SIM personalisation

checks - contact your Service Provider

SIM Invalid

The selected feature is either not supported by the SIM or

is not available with the current subscription - contact your

Service Provider

Function

Unavailable

The PIN2 is blocked permanently because the wrong

PUK2 has been entered ten times, services controlled by

PIN2 cannot be used - contact your Service Provider

PIN2 Invalidated

Trouble Shooting

A message has been received but the message store is

full - to receive messages, delete some of the currently

stored messages or set messages to Auto Delete

Message Rejected

Store Full

Number Too Long

(Max:20)

The edited or newly created Phonebook number is too

long for the SIM

Warning Store Full The message area is full. Your messages cannot be stored

Continue?

until some of the currently stored messages are deleted

On changing the phone lock code, verification of the new

Verification Failure code is incorrect - retry changing the lock code with correct

verification

Incorrect Lock

Code

Disabling or enabling the lock code has failed due to

incorrect entry of the lock code - re-enter lock code

Invalid PIN / PIN2 /

PUK / PUK2

The entered code is incorrect - re-enter code correctly

Auto Redial List

Full

Redial list of unsuccessfully dialled numbers is full - switch

the phone off and then on again

Important Information

Safety Considerations

The following information should be read and understood as it provides details which

will enable you to operate your phone in a manner which is both safe to you and your

environment, and conforms to any legal requirements regarding the use of cellular

phones.

This equipment should only be charged with approved charging

equipment, e.g. AC Adaptor (EB-CAD92xx*) - supplied in the Main Kit.

Other usage will invalidate any approval given to this apparatus and

may be dangerous. The use of approved charging equipment is

recommended to ensure optimum performance and avoid damage to

your phone. Ensure the voltage rating of the AC Adaptor is compatible

with the country of use when travelling abroad.

Other recommended equipment for charging includes DC Adaptor

(EB-CDD92), and Handsfree Car Kit (EB-HFD92Z).

* Where xx identifies the specific AC Adaptor region, e.g. CN, EU, HK, TW, UK.

Switch off your cellular phone when in an aircraft. The use of cellular

phones in an aircraft may be dangerous to the operation of the aircraft,

disrupt the cellular network and may be illegal. Failure to observe this

instruction may lead to the suspension or denial of cellular phone

services to the offender, or legal action or both.

You are advised not to use the equipment at a refuelling point. You are

reminded to observe restrictions on the use of radio equipment in fuel

depots, chemical plants or where blasting operations are in progress.

Never expose the battery pack to extreme temperatures (in excess of

60°C) or charge the battery pack for much longer than recommended.

You MUST exercise proper control of your vehicle at all times. Do not

hold a phone while you are driving; find a safe place to stop first. Do not

speak into a handsfree microphone if it will take your mind off the road.

Always acquaint yourself thoroughly with restrictions concerning the

use of cellular phones within the country you are driving and observe

them at all times.

Care must be taken when using the phone in close proximity to personal

medical devices, such as pacemakers and hearing aids.

Important Information

For most efficient use hold the phone as you would any normal

telephone. Keep the antenna pointed over your shoulder while in use.

Use only the supplied or approved replacement antenna. Unauthorized

antennas, modifications or attachments may damage the phone and

violate applicable regulations. The use of an unapproved antenna,

modification or attachment may result in the invalidation of your

guarantee – this does not affect your statutory rights.

This Panasonic mobile phone is designed, manufactured and tested to

ensure that it complies with the following specifications covering RF

exposure guidelines;

CENELEC European Pre-standard ENV50166-2

ANSI C95.1-1992 (USA, Asia-Pacific)

AS 2772.1 (Int)-1998 (Australia)

Care and Maintenance

Pressing any of the keys may produce a loud tone. Avoid holding the

phone close to the ear while pressing the keys.

Extreme temperatures may have a temporary effect on the operation of

your phone. This is normal and does not indicate a fault.

Do not modify or disassemble the equipment. There are no user

serviceable parts.

Do not subject the equipment to excessive vibration or shock.

Avoid contact with liquids. If the equipment becomes wet immediately

remove the power and contact your dealer.

Do not leave the equipment in direct sunlight or a humid, dusty or hot

area.

Keep metallic items that may accidentally touch the terminals away from

the equipment.

Always charge the Battery Pack in a well ventilated area, not in direct

sunlight, between +5°C and +35°C. It is not possible to recharge the

battery pack if it is outside this temperature range.

Avoid recharging battery packs for longer than recommended.

Do not incinerate or dispose of the battery packs as ordinary rubbish. The

battery packs must be disposed of in accordance with local legislation

and may be recycled.

When disposing of any packing materials or old equipment check with

your local authorities for information on recycling.

Glossary of Terms

Dual Tone Multi-Frequency tones allow you to

communicate with computerized phone systems, voice

mailboxes etc.

DTMF Tones

Global System for Mobile Communications. The name given

to the advanced digital technology that your phone uses.

GSM

Home Country

Home Network

The country where your home network operates.

The GSM network on which your subscription details are

held.

Network

Operator

The organization responsible for operating a GSM network.

Used for the control of the Call Bar. Supplied by your

Service Provider.

Password

Personal Identification Number used for SIM security.

Supplied by your Service Provider. If the PIN is entered

incorrectly 3 times, the PIN will be blocked.

Personal Identification Number used for the control of

Fixed Dial Store and Call Charge metering. Supplied by

your Service Provider. If the PIN2 is entered incorrectly 3

times, the PIN2 will be blocked.

PIN2

PIN/PIN2 Unblocking Key. Used to unblock the PIN/PIN2.

Supplied by your Service Provider. If the PUK/PUK2 is

entered incorrectly 10 times, the PUK/PUK2 will be

blocked.

PUK/PUK2

The act of locking on to a GSM network. This is usually

performed automatically by your phone.

Registration

Roaming

The ability to use your phone on networks other than your

Home network.

The organization responsible for providing access to the

GSM network.

Service Provider

Subscriber Identity Module. A small smart-card which

stores unique subscriber and user-entered information

such as Phonebook and Short Messages. Supplied by your

Service Provider.

SIM

Specifications

Telephone

GSM900 Class 4

GSM1800 Class 1

Type

Temperature range

Charging

Storage

+5°C to +35°C

-20°C to +60°C

Battery – Attached to phone

Battery Pack (S)

77g

Weight

Dimensions

Height x Width x Depth

118.1 x 40.5 x 16.4mm

Supply Voltage

3.7V DC, 650mAh Li-Ion

Standby Time - Idle Mode (h)

Talk Time (h)

Up to 160

3.5

Charge Time (min)

100

Note: Charge time will be longer when the phone is turned on. Battery life is affected

by the network you are using and the condition of the battery pack.

EU Warranty

EU/EEA-Wide guarantee is applicable in the EU/EEA and Switzerland.

Panasonic GSM European Service Guarantee Conditions

Dear Customer,

Thank you for buying this Panasonic digital cellular telephone. The Panasonic GSM

European Service Guarantee only applies while traveling in countries other than where the

product was purchased. Your local guarantee is applicable in all other cases. Ifyour

Panasonic GSM telephone requires service while abroad, please contact the local service

company shown on this document.

The Guarantee

The applicable period of the European wide guarantee for GSM is generally 12 months for

the main body and 3 months for the rechargeable battery. With respect to a product used

in a country other than a country ofpurchase, notwithstanding what is stated in the

conditions below, the customer will benefit, in that country of use, from these guarantee

periods of, respectively, 12 and 3 months, if these conditions are more favorable to him

than the local guarantee conditions applicable in such country ofuse.

Conditions of Guarantee

When requesting guarantee service the purchaser should present the warranty card

together with proofofpurchase, to an authorized service centre.

The guarantee covers breakdowns due to manufacturing or design faults; it does not apply

to other events such as accidental damage, however caused, wear and tear, negligence,

adjustment, modification or repair not authorized by us.

Your sole and exclusive remedy under this guarantee against us is the repair, or at our

option the replacement, ofthe product, or any defective part or parts. No other remedy,

including, but not limited to, incidental or consequential damage or loss ofwhatsoever

nature shall be available to the purchaser.

This is in addition to and does not in any way affect any statutory or other rights of

consumer purchasers. This guarantee applies in countries shown on this document at the

authorized service centres detailed for that country.

Panasonic Service Center Berlin

RUESS SYSTEMS

Service Centres in the UK

Tel. +44 870 5159159

Thrasoltstraße 11

10585 Berlin

Tel. +49 (0)30/ 342 2013

Panasonic Service Center Rostock

warnow electronic service gmbh

An der Jägerbäk 2

Panasonic Service Center Dresden

SERKO GmbH

18069 Rostock

Großenhainer Straße 163

01129 Dresden

Tel. +49 (0)351/ 85 88 477

Tel. +49 (0)381/ 82 016

Panasonic Service Center Hamburg

ELVICE Service GmbH

Spaldingstraße 74

20097 Hamburg

Tel. +49 (0)40/ 23 08 07

Panasonic Service Center Cottbus

Petsch Kundendienst GmbH

Am Seegraben 21

03058 Gross-Gaglow

Tel. +49 (0)355/ 58 36 36

Panasonic Service Center Rendsburg

FERNSEH-DIENST B&W Service GmbH

Kieler Straße 41

24768 Rendsburg

Tel. +49 (0)4331/ 14 11-0

Panasonic Service Center Leipzig

KES Keilitz-Electronic-Service GmbH

Föpplstraße 19

04347 Leipzig

Panasonic Service Center Bremen

COM Elektronik Service GmbH

Rübekamp 50

28219 Bremen

Tel. +49 (0)421/ 691 80 69

Tel. +49 (0)341/ 244 33 33

Panasonic Service Center Chemnitz

WPS Rundfunk- u. Fernsehservice GmbH

Zietenstraße 16

09130 Chemnitz

Panasonic Service Center Hannover

COM Elektronik Service GmbH

Vahrenwalder Straße 311

30179 Hannover

Tel. +49 (0)371/ 40 10 359

Panasonic Service Center Berlin

SERKO GmbH

Schwedter Straße 34a

10435 Berlin

Tel. +49 (0)511/ 37 27 91

Tel. +49 (0)30/ 44 30 3221

EU Warranty

Panasonic Service Center Magdeburg

SERKO GmbH

Ebendorfer Chaussee 47

39128 Magdeburg

Service-Zentren in Österreich

Funk Fuchs GmbH & CoKg Unterhart 90

4642 Sattledt

Tel. +49 (0)391/ 289 90 69

Panasonic Service Center Düsseldorf

VTH GmbH

Tel. +43 7244 733

Funktechnik Seissl

Dorf79

6330 Schwoich

Tel. +43 5372 8217

Kölner Straße 147

40227 Düsseldorf

Tel. +49 (0)211/ 77 90 25

Panasonic Service Center Essen

Bernd van Bevern GmbH

Heinrich-Held-Straße 16

45133 Essen

Elektro Oberndorfer

Linzer Straße 2-4

4840 Vöcklabruck

Tel. +43 7672 72889

Tel. +49 (0)201/ 84 20 220

Panasonic Austria Handelsges.mbH

Laxenburger Straße 252

1232 Wien

Panasonic Service Center Osnabrück

Petsch Kundendienst GmbH

Pagenstecherstraße 75

Tel. +43 222/61080

49090 Osnabrück

Tel. +49 (0) 541/ 68 038

Panasonic Service Center Wiesbaden

J. Hemmerling - VAD GmbH

Ostring 7

Centres de service après-vente en France

65205 Wiesbaden

ASTELCOM

75 quai de Seine

75019 - Paris

Tel. +49 (0)6122/ 90 91 10

Panasonic Service Center Mannheim

N. Schaaf

Reichenbachstraße 21-23

68309 Mannheim

Tel. +49 (0)621/ 72 787-0

Tél.: +33 01 42 09 95 16

ELECTRONIQUE SERVICE av. Figuières

ZAC Font de la Banquière 34970 - Lattes

Tél.: +33 04 67 15 96 30

Panasonic Service Center Stuttgart

Hans Beck

Friedrich-List-Straße 38

70771 Leinfelden-Echterdingen

Tel. +49 (0) 711/ 94 701-0

DMF ELECTRONIQUE

24 rue de l’Economie

69500 - Lyon-Bron

Tél.: +33 04 72 37 16 27

S.T.E.

3 chemin de l’Industrie

06110 - Le Cannet Rocheville Tél.: +33 04

93 46 05 00

Panasonic Service Center Reutlingen

Herbert Geissler

Lichtensteinstraße 75

72770 Reutlingen

LAPUCE

Tel. +49 (0)7072 / 92 96-0

31 rue des Teinturiers

14300 - Caen

Panasonic Service Center München

G.Berghofer & W.Kaller GmbH

Helene-Wessel-Bogen 7

80939 München

Tél.: +33 02 31 86 64 51

S.T.R.A.

15 bis rue du Pré La Reine 63100 -

Clermont-Ferrand

Tel. +49 (0)89/ 318 907-0

Panasonic Service Center Augsburg

Klaus Bienek

Tél.: +33 04 73 92 01 40

CLINIC VIDEO

Affinger Straße 4

1 bis rue de Beauvais

56100 - Lorient

86167 Augsburg

Tel. +49 (0)821/ 70 70 75

Tél.: +33 02 97 21 06 07

Panasonic Service Center Nürnberg

Herbert Geissler GmbH

Friedrich-Ebert-Straße 21

90537 Feucht

BEAUGENDRE

8 bis

rue du Pré du Bois/ZI de Chantpie

35500 - Rennes

Tel. +49 (0)9128/ 70 76-0

Tél.: +33 02 99 50 24 14

Panasonic Service Center Eisenach

Blitz Elektro-Elektronik-GmbH

Bahnhofstraße 17

99817 Eisenach

Tel. +49 (0)3691/ 29 29 42 8

CETELEC

6 impasse du pétrole

13015 Marseille

Tél.: +33 04 91 02 17 17

SETELEC

23 rue du Châtelet

76420 - Bihorel Les Rouens

Tél.: +33 02 35 60 64 39

EU Warranty

ELECTROTECH

2 bd Alexandre 1er de Yougoslavie

21000 - Dijon

Service-centra in

Nederlands

Tél.: +33 03 80 56 18 09

TELEMAN

Panasonic-Centre Nederland

(Servicom bv)

4 rue du 19 mars 1962

38320 - Eybens

P.O Box 16280

2500 BG

Den-Haag

Nederland

Tél.: +33 04 76 25 50 20

TECHNIC COLOR

ZI Thibaut

15 rue Boudeville

31084 - Toulouse cedex

Tél.: +33 05 61 40 32 32

Tel. +31 703314314

Zonweg 60

2516 BM

ELECTRONIQUE SERVICE+

5, bd Louis XI,

Den-Haag

Nederland

ZI Menneton,

Tel. +31 703314314

37000 - Tours

Tél.: +33 02 47 36 43 43

SAVLOR

33, av. du Général De Gaulle,

54280 - Seichamps

Tél: +33 02 20 82 82

Per i Centri Assisitenza in Italia

Servizio Clienti

Tel. +39 02/ 67072556

TEVISO

ZA de Terrefort B.P. 71

33520 - Bruges

Tél.: +33 05 56 28 96 36

Centros de Servicio en España

M.R.T.

PANASONIC SALES SPAIN, S.A. (S.T.R.)

Clara del REY, 8 Lateral

28002 Madrid

74 rue Albert Einstein

ZI Nord

72021 - Le Mans cedex

Tél.: +33 02 43 28 52 20

Tel. +34 91 519 91 40

ZENER ELECTRONICA

Orillamar, 65 Bajo

EUROTECHNIC

3 rue Niepce

15002 La Coruña

ZA Les Garennes

78130 - Les Mureaux

Tél.: +33 02 34 92 02 40

Tel. +34 981 22 07 00

ELECTRONICA MILLAN, S.L.

Natalia, 6

29009 Málaga

Tel. +34 95 227 39 87

A.A.V.I Centre de gros

1 rue du Mont deTerre

59818 - Lesquin

Tél.: +33 03 20 62 18 98

TECNOLEC, S.A

Pinar del Río, 48 - 50

08027 Barcelona

SID ELECTRONIQUE

95 - 97 avenue Roger Salengro

13003 - Marseille

Tel. +34 93 340 87 53

Tél.: +33 04 91 50 52 54

S.T.R. BROADCAST

Av. Zuberoa, 12

I.T.V.S.

48012 Bilbao

Village du petit chatelier

359 Route de Ste-Luce

44301 NANTES

Tel. +34 94 410 00 23

LAVISON, C.B.

Montseny, 35

Tél.: +33 02 51 89 18 10

17005 Girona

N.T.M.

Tel. +34 972 23 01 22

40 Bd Bessières

75017 PARIS

IRTESA ELECTRONICA

Jaume Ferran, 72

07004 Palma de Mallorca

Tel. +34 971 20 47 02

Tél.: +33 01 40 29 60 04

S.T.A.V.

14 Rue dessaix

67450 MUNDOLSHEIM

Tél.: +33 03 88 20 43 30

PANASONIC SALES SPAIN, S.A. (S.T.R.)

Asunción, 27

41011 Sevilla

Tel. +34 95 427 54 04

PANASONIC SALES SPAIN, S.A. (S.T.R.)

Alberíque, 33

46008 Valencia

Tel. +34 96 385 76 31

EU Warranty

For nærmeste servicecenter ring Panasonic Servicesenter i Norge

Danmark

Norsk Elektronikksenter

Tel. +45 43 20 08 50

Fetveien 1

2007 Kjeller

Tlf: +47 63 80 45 00

Panasonic Norge AS

Østre Aker vei 22

0508 Oslo

Firmor i Sverige

Komrep

Tlf: +47 22 91 68 00

Rosenlundsgatan 4

411 20 Göteborg

Tel. +46 031-173354

ÊÝíôñá ôå÷íéêÞò õðïóôÞñéîçò

Signalstyrkan

Kungsholmstorg 4

104 22 Stockholm

Tel. +46 08-6542500

INTERTECH S.A.

International Technologies

Áöñïäßôçò 26, 167 77 Åëëçíéêü

Tá÷. Èõñ.: 738 21, 167 10 ÅËËÇÍÉÊÏ

Ôçë. ÊÝíôñï: (01) 9692.300

CR service

Industribyn 3

232 37 Malmö

Tel. +46 040-430030

ÕðïêáôÜóôçìá Âüñåéáò ÅëëÜäáò:

Ê. ÊáñáìáíëÞ 11, 54638 ÈÅÓÓÁËÏÍÉÊÇ

Ôçë. ÊÝíôñï: (031) 245.840-3

Huoltokeskukset Suomessa:

KAUKOMARKKINAT OY

PANASONIC-HUOLLOT Kutojantie 4

02630 Espoo

Puh. +358 09 521 5151 Huolto

Puh. +358 09 521 5155 Varaosat Ja

Tarvikkeet

Centros de Assistência em Portugal

PAPELACO, S.A.

Vale Paraiso - Ferreiras

8200 ALBUFEIRA

ALGARVE

Tel. +351 89 589960

SETELE OY

Vanha Viertotie 7

00300 Helsinki

PAPELACO, S.A.

Largo de Santos, 9

1200 LISBOA

Puh. +358 09 549100

Tel. +351 1 3970539

PLAY-SHOP SERVICE Keskuskatu 3

00100 Helsinki

Puh. +358 09 27053626

PAPELACO, S.A.

Largo do Tribunal, Lote 11

2400 LEIRIA

MEGAFIX KY

Tel. +351 44 28071

Louhenkatu 9

74100 Iisalmi

PAPELACO, S.A.

Rua Cidade de Santos, 31R/C

9000 FUNCHAL

Puh. +358 017 14631

T: MI.M.HAAPOJA

Miilukatu 7

MADEIRA

Tel. +351 91 231523

40320 Jyväskylä

Puh. +358 014 677121

PAPELACO, S.A.

Rua do Outeiro,

Lote 25 - Gemunde

4470 MAIA

OUTOKUMMUN PUHELIN

Pohjoisahonkatu 9

83500 Outokumpu

PORTO

Puh. +358 013 562211

Tel. +351 2 944 0354/9

SETELE OY

Rengastie 31

PAPELACO, S.A.

Rua Major Leopoldo da Silva,

Lote 3

60100 Seinäjoki

Puh. +358 06 4148344

3500 VISEU

TURUN J-MARKKINAT OY Tuureporinkatu

Tel. +351 32 424771

20100 Turku

Puh. + 358 02 2332685

EU Warranty

Centres de service après-vente en

Belgique

Jonh Lay Electronics AG

Littauerboden

6014 Littau

BROOTHAERS

Hoevelei 167

Phone: +41 41 259 9090 Fax: +41 41 252

0202

2630 AARTSELAAR

Tel. +32 03/887 06 24

Nova-Funk Technik AG

Neuenkirchstr. 18c

6020 Emmenbrüche

Phone: +41 41 280 9292 Fax: +41 41 280

9294

HENROTTE

Rue du Campinaire 154

6240 FARCIENNES

Tel. +32 071/39 62 90

Bindschädler Marc

PIXEL VIDEOTECH

Rue St Remy 7

4000 LIEGE

Radio-TV

Zürichstr. 123c

8123 Ebmatingen

Tel. +32 041/23 46 26

Phone: +41 01 980 3040 Fax: +41 01 980

4321

DELTA ELECTRONICS

Rue P.d’Alouette 39

5100 NANINNE

Tel. +32 081/40 21 67

ELEKSERVICE FEYS Houthulstseweg 56

8920 POELKAPELLE

TEKOFAKS ISTANBUL CENTRE OFFICE

KAÐITHANE CADDESI SEVÝLEN SOKAK

NO. 58 80340 ÇAÐLAYAN-ISTANBUL

Tel: 90-212-220 60 70 / 14 Lines

Fax: 90-212-220-60 94

Tel. + 32 057/48 96 37

AVS WAASLAND Lavendelstraat 113

9100 ST NIKLAAS

Tel. +32 03/777 99 64

A.V.T.C SA

ANKARA BRANCH OFFICE

Kleine Winkellaan 54

1853 STROMBEEK-BEVER Tel. + 32

02/267 40 19

GÜVEN MAH.FARABI SOKAK NO: 38/6

06690 KAVAKLIDERE- ANKARA

Tel: 90-312-467 30 94/2 Lines pbx

Fax: 90-312 467 85 38

RADIO RESEARCH

Rue des Carmélites 123

1180 BRUXELLES

ÝSMÝR BRANCH OFFICE

CUMHURÝYET BULVARI NO:330 K.:6

D.:608 SEVÝL ÝÞ MERKEZÝ 35520

ALSANCAK-ÝZMÝR

Tel: 90-232-464 29 01 pbx

Fax: 90-232-422 67 44

BURSA BRANCH OFFICE

ÞEHREKÜSTÜ MAHLLESÝ DURAK

CADDESÝ NO.:7 BURSA

Tel: 90-224-225 10 46 pbx

Fax: 90-224-223 81 03

Tel. +32 02/345 68 56

VIDEO TECHNICAL SERVICE

Av. du Roi Albert 207

1080 BRUXELLES

Tel. +32 02/465 33 10

SERVICE CENTER Kapellestraat 95

9800 DEINZE

Tel. +32 09/386 76 67

TOP SERVICE

ADANA BRANCH OFFICE

Westerloseweg 10

2440 GEEL

REÞATBEY MAH.FUZULÝ CAD.GÜLEK

SÝTESÝ A BLOK NO: 75b 01120 ADANA

Tel: 90-322-458 39 52 pbx

Tel. +32 014/54 76 24

TELECTRO SC

Fax: 90-322-453 21 32

Quai des Ardennes 50

4020 Liège

TRABZON BRANCH OFFICE

MARAÞ CAD.MARAÞ APT.NO:51 D.:2

61200 TRABZON

Tel: 90-462-321 33 08

Fax: 90-462-326 37 78

ANTALYA BRANCH OFFICE

ALTINDAÐ MAH. 146 SOKAK ÖZKOÇ

APT.NO:9/1-2A ANTALYA

Tel: 90-242-243 23 70 / 3 Lines

Fax: 90-242-243 23 72

DÝYARBAKIR BRANCH OFFICE

LÝSE CADDESÝ GÖKALP APT.NO: 18/A

DÝYARBAKIR

Tel: 90-412-228 73 00

Fax: 90-412-223 59 00

Tel. +32 041/43 29 04

Centres de service après-vente au

Luxembourg

NOUVELLE CENTRAL RADIO

Rue des Jones 15

L - 1818 Howald

Luxembourg - Grand Duché

Tel. +32 40 40 78

EU Warranty

EU/EEA-Wide Guarantee: Conditions applicable in any country other than the country of original

purchase.

When the purchaser finds the appliance to be defective, he should promptly contact

the proper sales company or national distributor in the EU/EEA country where this

guarantee is claimed, as indicated in the “Product Service Guide” or the nearest

authorized dealer together with this guarantee and proofofdate ofpurchase.

The purchaser will then be informed whether:

(i) the sales company or national distributor will handle the repair service: or

(ii) the sales company or national distributor will arrange for trans-shipment of the

appliance to the EU/EEA country where the appliance was originally marketed; or

(iii) the purchaser may himselfsend the appliance to the sales company or national

distributor in the EU/EEA country where the appliance was originally marketed.

Ifthe appliance is a product model which is normally supplied by the sales company or

national distributor in the country where it is used by the purchaser, then the

appliance, together with this guarantee card and proofofdate ofpurchase, should be

returned at the purchaser’s risk and expense to such sales company or distributor,

which will handle the repair service. In some countries, the affiliated sales company or

national distributor will designate dealers or certain service centres to execute the

repairs involved.

Ifthe appliance is a product model which is not normally supplied in the country where

used, or if the appliance’s internal or external product characteristics are different from

those ofthe equivalent model in the country where used, the sales company or

national distributor may be able to have the guarantee repair service executed by

obtaining spare parts from the country where the appliance was originally marketed, or

it may be necessary to have the guarantee repair service executed the sales company

or national distributor in the country where the appliance was originally marketed.

In either case, the purchaser must furnish this guarantee card and proofofdate of

purchase. Any necessary transportation, both ofthe appliance and ofany spare parts,

will be at the purchaser’s risk and expense, and there may be a consequent delay in

the repair service.

Where the consumer sends the appliance for repair to the sales company or national

distributor in the country ofuse ofthe appliance, the service will be provided on the

same local terms and conditions (including the period ofguarantee coverage) as

prevail for the same model appliance in the country of use, and not the country of

initial sale in the EU/EEA. Where the consumer sends the appliance for repair to the

sales company or national distributor in the EU/EEA country where the appliance was

originally marketed, the repair service will be provided on the local terms and

conditions prevailing in the country ofinitial sale in the EU/EEA.

Some product models require adjustment or adaptation for proper performance and

safe use in different EU/EEA countries, in accordance with local voltage requirements

and safety or other technical standards imposed or recommended by applicable

regulations. For certain product models, the cost ofsuch adjustment or adaptation

may be substantial and it may be difficult to satisfy local voltage requirements and

safety or other technical standards. It is strongly recommended that the purchaser

investigates these local technical and safety factors before using the appliance in

another EU/EEA country.

This guarantee shall not cover the cost ofany adjustments or adaptations to meet

local voltage requirements and safety or other technical standards. The sales

company or national distributor may be in a position to make the necessary

adjustments or adaptations to certain product models at the cost ofthe purchaser.

However, for technical reasons it is not possible to adjust or adapt all product models

to comply with local voltage requirements and safety or other technical standards.

Moreover, where adaptations or adjustments are carried out the performance of the

appliance may be affected.

Ifin the opinion ofthe sales company or national distributor in the country where the

appliance is used the purchaser has the necessary adjustments or adaptations to local

voltage requirements and technical or safety standards properly made, any

subsequent guarantee repair service will be provided as above indicated, provided the

purchaser discloses the nature ofthe adjustment or adaptation ifrelevant to the repair.

(It is recommended that the purchaser should not send adapted or adjusted equipment

for repair to the sales company or national distributor in the country where the

appliance was originally marketed ifthe repair relates in any way to the adaptation or

adjustment).

This guarantee shall only be valid in territories subject to the laws ofthe European

Union and the EEA.

Please keep this guarantee with your receipt.

Notes

E-mail Settings

Use the table below to record your E-mail settings. The list may vary depending on

the Internet Service Provider.

Item

Hint

Current Setting

Profile Name

Mail Account

SMTP Server

POP3 Server

POP3 Account

Password

Service Provider Name

Your E-mail Address

Domain Name or IP Address

Reminder of Password

Leave/Delete Message*

Phone Number

Mail Delivery

Access Point

Circuit Type

User ID

Analog or Digital

Your name (or alias)

Reminder of Password

IP Address

User Password

Primary DNS

Secondary DNS

IP Address

* This function allows e-mail messages to either be removed from the server when

they have been downloaded to the phone, or they can be left on the server.

The Serial Number can be found on the outside of the phone under the battery.

For your convenience we recommend that you note the following details as a

record of your purchase.

Part Number

Serial Number

Dealer Name

Purchase Date

BULL CP8 PATENT

Information in this document is subject to change without notice. No part of these

instructions may be reproduced or transmitted in any form or by any means without

obtaining express permission from Matsushita Communication Industrial UK

Limited

7LB825A

Printed in UK

www.mcuk.panasonic.co.uk

00.290

West Bend L 5227 User Manual
Taylor 516 User Manual
Tascam CD 160MKII User Manual
Sony WALKMAN WM FX325 User Manual
Sony CDX C4900R User Manual
Seagate BARRACUDA ST32000542AS User Manual
SanDisk SDUFD2AK 1024 User Manual
Samsung SGH P107 User Manual
Panasonic SL SW891C User Manual
Atmor new95 User Manual