Panasonic EB GD67 User Manual

Operating Instructions  
Digital Cellular Phone  
EB-GD67  
Before operating this equipment please read these instructions completely.  
Important Information  
Important Information  
We, Matsushita Mobile Communications Development of Europe Ltd,  
declare, that the EB-GD67 conforms with the essential and other relevant  
requirements of the directive 1999/5/EC. A declaration of conformity to  
this effect can be found at http://www.panasonicmobile.com/support  
Safety Considerations  
The following information should be read and understood as it provides  
details which will enable you to operate your phone in a manner which is  
both safe to you and your environment, and conforms to any legal  
requirements regarding the use of cellular phones.  
This equipment should only be charged with approved charging  
equipment. Other usage will invalidate any approval given to this  
apparatus and may be dangerous. The use of approved charging  
equipment is recommended to ensure optimum performance  
and avoid damage to your phone. Ensure the voltage rating of  
the Fast Travel Charger is compatible with the area of use when  
travelling abroad.  
A Fast Travel Charger (EB-CAD95xx*) is supplied with the Main  
Kit. Other recommended equipment for charging -Car Charger  
(EB-CDD95)  
Note* xx identifies the Charger region, e.g. CN, EU, HK, UK.  
Switch off your cellular phone when in an aircraft. The use of  
cellular phones in an aircraft may be dangerous to the operation  
of the aircraft, disrupt the cellular network and may be illegal.  
Failure to observe this instruction may lead to the suspension or  
denial of cellular phone services to the offender, or legal action  
or both.  
Do not incinerate or dispose of the battery as ordinary rubbish.  
The battery must be disposed of in accordance with local  
legislation and may be recycled.  
i
 
Important Information  
It is advised not to use the equipment at a refuelling point. Users  
are reminded to observe restrictions on the use of radio  
equipment in fuel depots, chemical plants or where blasting  
operations are in progress. Never expose the battery to extreme  
temperatures (in excess of 60°C).  
It is imperative that the driver exercises proper control of the  
vehicle at all times. Do not hold a phone while you are driving;  
find a safe place to stop first. Do not speak into a Handsfree  
microphone if it will take your mind off the road. Always  
acquaint yourself thoroughly with restrictions concerning the use  
of cellular phones within the area you are driving and observe  
them at all times.  
Care must be taken when using the phone in close proximity to  
personal medical devices, such as pacemakers and hearing aids.  
For most efficient use hold the phone as you would any normal  
phone. Your GD67 cellular phone is fitted with an internal  
antenna, located in the upper portion of the phone, above the  
display screen. To avoid deterioration of signal quality or antenna  
performance, do not touch or "cup" the antenna area while the  
phone is switched on. (See "SAR Statement" page iii)  
Unauthorized modifications or attachments may damage the  
phone and violate applicable regulations. The use of an  
unapproved modification or attachment may result in the  
invalidation of your guarantee – this does not affect your  
statutory rights.  
This Panasonic mobile phone is designed, manufactured and  
tested to ensure that it complies with the specifications covering  
RF exposure guidelines applicable at the time of manufacture, in  
accordance with EU, USA FCC, and Australian ACA regulations;  
or as specifically stated in the separate declaration leaflet  
enclosed with this product.  
Please refer to our website for latest information/standards  
compliance in your country/region of use.  
http://www.panasonicmobile.com/health.html  
ii  
SAR Statement  
SAR Statement  
European union - RTTE  
THIS PANASONIC PHONE (MODEL EB-GD67) MEETS THE EU REQUIREMENTS FOR  
EXPOSURE TO RADIO WAVES.  
Your mobile phone is a radio transmitter and receiver. It is designed and  
manufactured not to exceed the limits for exposure to radio frequency (RF)  
energy recommended by The Council of the European Union. These limits  
are part of comprehensive guidelines and establish permitted levels of RF  
energy for the general population. The guidelines were developed by  
independent scientific organisations through periodic and thorough  
evaluation of scientific studies. The limits include a substantial safety margin  
designed to assure the safety of all persons, regardless of age and health.  
The exposure standard for mobile phones employs a unit of measurement  
known as the Specific Absorption Rate, or SAR. The SAR limit  
recommended by The Council of the European Union is 2.0 W/kg.* Tests  
for SAR have been conducted using standard operating positions with the  
phone transmitting at its highest certified power level in all tested frequency  
bands. Although the SAR is determined at the highest certified power level,  
the actual SAR level of the phone while operating can be well below the  
maximum value. This is because the phone is designed to operate at  
multiple power levels so as to use only the power required to reach the  
network. In general, the closer you are to a base station antenna, the lower  
the power output.  
Before a phone model is available for sale to the public, compliance with the  
European R&TTE directive must be shown. This directive includes as one  
essential requirement the protection of the health and the safety for the  
user and any other person. The SAR value for this model phone, when  
tested for use at the ear, for compliance against the standard was  
0.505 W/kg. While there may be differences between the SAR levels of  
various phones and at various positions, they all meet the EU requirements  
for RF exposure.  
* The SAR limit for mobile phones used by the public is 2.0 watts/kilogram  
(W/kg) averaged over ten grams of tissue. The limit incorporates a  
substantial margin of safety to give additional protection for the public and  
to account for any variations in measurements. SAR values may vary  
depending on national reporting requirements and the network band. For  
SAR information in other regions please look under product information at  
http://www.panasonicmobile.com/health.html  
iii  
 
Accessories  
Accessories  
Car  
Car Charger  
EB-CDD95  
Top up your battery in your vehicle by attaching this  
accessory to your phone and to the cigarette lighter socket  
Car Holder  
EB-KAD67  
This compact Car Holder can be mounted in your vehicle,  
providing a convenient and attractive means of storing your  
phone  
Personal  
Carry Case  
EB-YKD67  
This attractive hip case protects your phone and by using  
the belt clip keeps it close at hand.  
Li-Ion Battery  
EB-BSD67  
Double your talk time by having a spare battery.  
Personal Handsfree  
EB-EMD35  
Talk and move while keeping your hands free by using this  
accessory. Just place the earpiece in your ear and the  
adaptor in the side of the handset - and talk  
iv  
 
Accessories  
Office  
Fast Travel Charger  
EB-CAD95UK  
Carry a lightweight portable charger wherever you go to  
ensure you always have power to talk  
Fast Travel Charger  
EB-CAD95EU  
Charge Data Cable  
EB-RSD67  
This Charge Data Cable is used to connect your phone to a  
PC, allowing data communication between them. This  
should be used in conjunction with the Free Panasonic  
Data Connection Assistant Software.  
The software can be downloaded from  
http://www.panasonicmobile.com/support/software  
Identify a Genuine Panasonic Accessory  
Panasonic produces some of the most advanced mobile phones available.  
So, as you’d expect from this class leader, the range of accessories are  
second to none.  
Most genuine Panasonic accessories will have a label showing an  
“EB-XXX00” model number  
v
 
Care and Maintenance  
Care and Maintenance  
Pressing any of the keys may produce a loud tone. Avoid holding  
the phone close to the ear while pressing the keys.  
Extreme temperatures may have a temporary effect on the  
operation of your phone. This is normal and does not indicate a  
fault.  
Do not modify or disassemble the equipment. There are no user  
serviceable parts.  
Do not subject the equipment to excessive vibration or shock.  
Avoid contact with liquids. If the equipment becomes wet  
immediately remove the power and contact your dealer.  
Do not leave the equipment in direct sunlight or a humid, dusty  
or hot area.  
Keep metallic items that may accidentally touch the terminals  
away from the equipment.  
Always charge the battery in a well ventilated area, not in direct  
sunlight, between +5°C and +43°C. It is not possible to  
recharge the battery if it is outside this temperature range.  
When connecting the phone to an external source, read the  
operating instructions of the equipment for the correct  
connection and safety precautions. Ensure the phone is  
compatible with the product it is being connected to.  
When disposing of any packing materials or old equipment check  
with your local authorities for information on recycling.  
vi  
 
Quick Reference  
Quick Reference  
Q
"Press (  
) to select".  
F
abcd  
Direction which the user can move around the display  
screen using the Navigation key.  
Press a key once for a particular phone operation.  
“Press and hold” a key for a particular phone function.  
Representation of screen menu option.  
Secondary Softkey  
F
+Hold  
F
Menu  
A
Negative soft key/Back-key  
B
-
Numeric key pads.  
1 0  
Answer a call or call a dialled number.  
D
E
To end a call or return to Idle screen or  
to switch the phone on or off.  
+Hold  
F
M
Indicates that a function is SIM Dependent.  
R
Indicates that a function is Network Dependent.  
Switches Quiet Mode on and off.  
#
vii  
 
Contents  
Safety Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i  
SAR Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii  
Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i  
European union - RTTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii  
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv  
Car . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv  
Personal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv  
Office . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v  
Identify a Genuine Panasonic Accessory . . . . . . . . . . . . . . . . . . . . . . . v  
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi  
Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii  
Getting to Know Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi  
Location of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi  
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Fitting the SIM & Removing the SIM . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Fitting the Battery and Rear Cover. . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Removing the Rear Cover and Battery . . . . . . . . . . . . . . . . . . . . . . . 2  
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Fitting the IO cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Fitting Image-In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Operation of Battery Level Indicator. . . . . . . . . . . . . . . . . . . . . . . . . 5  
Low Battery Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
The Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Display Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Using the Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Selecting a Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Switching the Phone On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
International Dialling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Emergency Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Automatic Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Ending a Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Caller Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Earpiece Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Locking the Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Using the PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Setting Quiet Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Setting Ring and Key Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Setting the Key Tone Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Store a Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Overwrite Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Browsing Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Retrieve a Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Editing Phonebook Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Grouping Phonebook Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Using Voice Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Voice Dial Entry Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Recalling Voice Dial Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Dialling Voice Dial Entries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
viii  
Editing the Voice Dial Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
My Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Personalising Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Add a Start-up Greeting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Displaying Animations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Idle Screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Media Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Colour Themes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Changing the Ring Tone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Download data (  
) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
R
Composing a Melody . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Setting the Backlight Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Changing the Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Restoring the Default Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . 28  
Phone Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Enabling Key Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Disabling Key Guard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Changing the Security Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Restricting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Initially Setting the Home Time . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Setting the Clock Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Altering the Time/Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Setting the Clock for Summer Time . . . . . . . . . . . . . . . . . . . . . . . . 33  
Setting the Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Muting the Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Setting a Power On/Off Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Currency Convertor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Text Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Setting the Phone for Short Text Messages. . . . . . . . . . . . . . . . . . . . . 37  
Setting the Message Centre Number . . . . . . . . . . . . . . . . . . . . . . . . 37  
Creating a Text Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Receiving Text Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Message Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Cut / Copy & Paste Message Text . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Manage Messages Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Chat SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Cell Broadcasts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Call Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Recent Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Call Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Call Charges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Setting the Unit Price . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Setting the Maximum Unit Level . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Setting a Warning Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Call Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Advanced Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Diverting Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Holding Calls and Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Making a Second Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Receiving a Second Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Accept a Second Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Reject a Second Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
End Current Call and Receive Second Call . . . . . . . . . . . . . . . . . . . . . 49  
ix  
Operation During Two Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Call Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
Multi-party Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Creating a Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Viewing Reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Deleting Reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Setting a Holiday Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Jump to Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Downloadable Games (  
) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
R
Embedded Games (  
WAP Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
R
Browser Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Activating the Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Navigating Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
The Browser Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Using Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Deactivating the Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
Setting the Linger Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
Additional Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
Desktop Handsfree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
Voice Memo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
DTMF Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63  
Note Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64  
Second Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64  
Setting Clock Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64  
Accessory Related Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65  
Text Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66  
T9® Text Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67  
Other Text Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67  
Editing Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67  
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68  
Important Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70  
Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74  
Phone (Including Battery)* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74  
EU Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75  
Personal Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80  
Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81  
Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82  
Licencing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83  
x
Getting to Know Your Phone  
Getting to Know Your Phone  
Location of Controls  
Charge /Incoming Call  
Indicator  
Earpiece  
Display  
Primary softkey  
Secondary Softkey  
Negative Softkey  
Call Key  
Power On/Off,  
Back-Key  
Earpiece/  
Microphone Socket  
Keypad  
Microphone  
xi  
 
xii  
Getting Started  
Getting Started  
Thank you for purchasing this Panasonic digital cellular phone. This phone is  
designed to operate on GSM networks - GSM900 or GSM1800. It also  
supports GPRS for packet data connections. Ensure the battery is fully  
charged before use.  
Before operating this phone please read the “Important Information”  
section - see page i.  
These operating instructions detail use of the equipment contained in the  
Main Kit.  
Some services detailed, are network dependent (  
) or may only be  
R
available on a subscription basis. Some functions are SIM dependent (  
).  
M
For more information contact the Service Provider. If an item in the Phone  
Option is network or SIM dependant and is not available, the items will be  
"Greyed-Out". If the highlight bar is moved over a "Greyed-Out" item, the  
primary softkey label will be removed.  
Fitting the SIM & Removing the SIM  
The SIM is inserted into the back of the phone underneath the battery.  
1
 
Getting Started  
Fitting the Battery and Rear Cover  
Removing the Rear Cover and Battery  
Ensure the phone is switched off and the charger is disconnected from the  
phone before removing the battery.  
2
 
Getting Started  
Charging the Battery  
Connecting the Fast Travel Charger  
The battery must be fitted in the phone before the charger is connected.  
Insert the connector into the base of the phone, ensuring the arrows on the  
connector are to the front of the phone.  
Note: DO NOT force the connector as this may damage the phone and  
or the charger.  
Connect the charger to the mains power supply. The charging indicator will  
light and the battery level indicator will scroll right to left when charging.  
Disconnecting the Fast Travel Charger  
When charging is complete turn off the mains power supply and disconnect  
the charger.  
3
 
Getting Started  
Fitting the IO cover  
If excess force is applied to the IO cover, it is possible that the cover can  
become detached from the phone.  
If the IO over does become detached, it can easily be replaced  
Fitting Image-In  
Customised image cards may be fitted to the rear of the phone, behind the  
transparent rear cover.  
4
 
Getting Started  
Operation of Battery Level Indicator  
While charging  
Charging complete  
Phone on  
Phone off  
K
K
H
LCD Battery Charge  
Indicator off  
Low Battery Warning  
When the battery power is low, a warning tone will sound, and a flashing  
LOW BATTERY message will be displayed. If this occurs during  
conversation, finish your call immediately. The power will automatically  
shut off after the warning tone. Fully recharge the battery. See “Charging  
the Battery” page 3. (Calls can be made and received while the phone is  
charging)  
It is recommended that the battery is fully discharged between charges to  
maintain optimum battery life and performance.  
The Menu System  
The menu system allows the user to access all the functions of the phone  
that are not accessible purely by key strokes. Each menu contains a list of  
options. Some menus have further sub menus.  
5
 
Getting Started  
Display Icons  
Following some operations the display will automatically clear after three  
seconds or after pressing any key.  
Status Icons  
The status icons are displayed according to the currently activated  
functions. The Antenna, Signal and Battery icons are displayed when the  
handset is switched on and connected to a network.  
Information Area  
Status Icons  
Main Display  
Left Hand  
Selection area  
Right Hand  
Selection area  
Primary Selection  
Area  
is displayed when you are registered to a non-home network -  
Roaming  
Y
Indicates Call divert is enabled  
t
Indicates Quiet Mode is enabled  
Indicates All tones or ring volume is off  
]
[
Icon flashes when there is an unread message in the Inbox, or  
remains permanently lit when store is full  
N
Indicates Phone lock is enabled  
O
Indicates it is possible to make emergency calls only  
S
T
GSM signal strength:  
GPRS signal strength:  
Indicates Battery level:  
- weak signal,  
- weak signal,  
- strong signal  
- strong signal  
\
r
T
q
q
H
?
- full,  
(flashing) - low battery  
H
G
Indicates Alarm is set  
6
 
Getting Started  
Indicates current Phonebook entry is sourced from the Mobile  
>
<
g
Phonebook  
Indicates current Phonebook entry is sourced from the SIM  
Phonebook  
Available directions in which the Navigation key can be pressed  
Using the Menu System  
The menu system provides the means for accessing all the functions which  
do not have their own dedicated buttons on the keypad.  
The menu functions are selected using the five-way Navigation key.(  
)
g
Selecting a Function  
and  
move around the icons on the screen. When a particular  
F Q  
g
menu is highlighted,  
, a submenu is displayed. From any submenu,  
F Q  
use until the required item is highlighted,  
e
F Q  
Example:  
From Idle  
, select Phone Option> Security > Phone Lock >  
F Q  
Status  
F Q  
Use to choose Enable or Disable,  
e
F Q  
Enter the lock code, See "Locking the Phone" page 11,  
In detail:  
F Q  
1
2
3
4
5
6
7
Use  
Use  
to enter the menu system  
g
to highlight the Phone Option menu  
d a  
to enter the menu  
F Q  
Use twice to highlight the Security menu  
a
three times to enter the Phone Lock menu  
F Q  
Use to select Enable or Disable  
Enter the Lock Code  
e
F Q  
F Q  
Following some operations the display will automatically clear after three  
seconds, if this is not the case to return to Idle.  
F E  
7
 
Getting Started  
Shortcuts (  
)
M
When familiar with the layout of the menu, use the keypad to enter the  
Menu Number. This will allow the user to obtain the required function  
without having to navigate through the display menus. For example,  
F
or  
to enter the menu,then  
to take you directly to the  
Q
g
731  
Enable/Disable menu. Make the choice of disable or Enable  
, enter  
F Q  
the Lock Code  
F Q  
8
Basic Operation  
Basic Operation  
New to GD67 is the introduction of the "Pick List", which is used  
extensively throughout the phone. Using to scroll through the Pick List,  
e
the user can highlight a feature before "checking" a check box, or selecting a  
button to the left of the option.  
to confirm selection of a feature and  
F Q  
previous screen.  
to return to the  
F B  
Switching the Phone On/Off  
+ Hold  
F
E
When the phone is switched on a greeting will be displayed and  
then the phone will go into Idle  
Making a Call  
Ensure that the phone is switched on, the network operator logo is  
displayed and the signal strength meter shows network coverage is available  
in the current area.  
1
2
Enter area code and phone number  
F D  
International Dialling  
Using the automatic international access code (+)  
you will be able to dial international numbers without  
having to know the code for the international  
exchange.  
If the international number is known then it can be  
entered in the normal fashion followed by the area  
code and phone number.  
1
2
From Idle  
+ Hold  
until “+” is displayed  
F
0
Use to cycle through the abbreviated international names  
e
F
to choose the required code  
Q
3
4
Enter area code and phone number  
F D  
9
 
Basic Operation  
Note: Many countries / regions include an initial “0” in the area code. This  
should, in most cases, be omitted when dialling international numbers. If  
you have difficulties making international calls, contact your Service  
Provider.  
Emergency Calls  
To make an emergency call the antenna symbol ( ) must be present.  
S
Enter 112  
or if no SIM is fitted to the phone  
F QaQ  
F D  
Automatic Redial  
When your connection is unsuccessful,  
F Q  
when  
is displayed and a timer will countdown in  
Ok  
seconds to the next redial.  
Auto Redial  
00:00:59  
To stop redialling,  
when  
is  
Cancel  
F Q  
displayed in the Primary Selection area.  
Cancel  
When a call is connected a beep will be emitted.  
If a call is repeatedly unsuccessful,the phone will not automatically redial  
the phone number. In this case you must redial the phone number  
manually.  
Ending a Call  
F E  
Answering a Call  
To receive a call the phone must be switched on and  
the signal strength meter must be displayed.  
any key except  
or  
to answer a  
F
call  
E
A
to reject a call  
F E  
during an incoming call, and you will be given the option to  
F Q  
Accept or Reject the call. Use to select an option and  
e
F Q  
If a call is not answered, or is rejected, the number of incoming calls missed  
will be displayed.  
any key to clear the display  
F
10  
 
Basic Operation  
Caller Identification  
This feature allows you to identify incoming calls. The caller’s phone  
number, and name if stored in Phonebook, will be displayed.  
Note: Caller Identification may not always be available.  
Earpiece Volume Control  
The volume level may be adjusted during a call:  
Use to decrease the volume, use to increase the volume  
a
b
Note: Volume control for Personal Handsfree accessory is adjusted in the  
same manner.  
Locking the Phone  
With the Phone Lock enabled you will be restricted  
to answer incoming calls and make emergency calls  
only. The Phone Lock Code is factory set to “0000”.  
1
From Idle  
, select Phone Option  
F Q  
> Security > Phone Lock  
F Q  
2
From the pop up menu select status  
F
Q
3
4
Select Enable  
F Q  
Enter the 4-digit code,  
F Q  
The lock icon ( ) will now be displayed.  
O
Unlocking the Phone  
Enter your Lock Code  
. However, when you turn the phone off  
F Q  
and on again the Lock Code will need to be re-entered. When the correct  
code has been entered a tick will appear in the primary selection  
area,  
F Q  
11  
 
Basic Operation  
Disabling Phone Lock  
The phone must be unlocked before the phone lock can be disabled.  
1
From Idle  
, select Phone Option > Security > Phone  
F Q  
Lock  
F Q  
2
3
4
From the pop up menu select status  
F Q  
Select Disable  
F Q  
Enter the 4-digit code  
F Q  
Using the PIN  
The PIN protects your SIM against unauthorized use. If you enable the PIN,  
every time the phone is turned on you will be prompted to enter the PIN.  
The PIN2 controls security for the Fixed Dial Store, Call Charge metering  
and Barred Dial.  
If either PIN/PIN2 is entered incorrectly 3 times the phone will be locked  
and the user will need to enter the PUK/PUK2 code.  
Contact your service provider for the PUK/PUK2 code.  
Note: If the PUK/PUK2 code is entered incorrectly 10 times, the phone  
will cease to operate.  
Enabling/Disabling the PIN  
1
From Idle  
, select Phone Option > Security > PIN  
F Q  
F Q  
2
3
4
Use select Status  
Select Enable / Disable ,  
F Q  
Enter PIN (Between 4 and 8 digits)  
a
F Q  
F Q  
Setting Quiet Mode  
When required, the phone can be set up to vibrate when a call is received.  
Quiet Mode enables the user to choose between Continuous,  
Intermittent vibration alerts and a user defind ring volume when a call is  
received.  
1
2
From Idle  
Select Ring Volume  
, select Personalise > Quiet Mode  
F Q  
F Q  
, adjust the ring volume as required  
F Q  
Z Q  
3
4
select Vibration  
F Q  
Choose the vibration setting required; Continuous, Intermittent  
or Disable,  
F Q  
12  
 
Basic Operation  
Note: When activated, the phone will vibrate briefly.  
Setting Ring and Key Volume  
Changing either the ring volume/key volume is done in the same manner. If  
you increase the ring volume above maximum it will set an escalating ring  
tone. If you turn the ring volume off, the silent indicator icon ( ) will be  
[
displayed.  
1
2
3
From Idle  
, select Personalise > Tones  
F Q  
F Q  
Select Ring Volume or Key Volume  
F Q  
F Q  
Use to set the volume level  
e
Setting the Key Tone Type  
1
From Idle  
select Personalise > Tones >Key Tone  
F Q  
Type  
F Q  
2
Use to select tone type  
e
F Q  
13  
 
Phonebook  
Phonebook  
It is possible to store phone numbers in two locations:  
In the SIM Phonebook (  
)
M
In the Mobile Phonebook. This means that if you change the SIM, the  
numbers in the phone are not lost  
The Mobile Phonebook has the advantage that you can group your  
phonebook entries together.  
Store a Number  
To Store a Number in the SIM Phonebook  
1
From Idle enter the phone number and  
F A  
2
3
To select SIM Phonebook  
F Q  
Enter the name – see “Text Entry” page 66,  
twice  
F Q  
Confirm Phone number  
4
5
F Q  
F Q  
Enter location number  
You can choose not to enter a location number and the entry will be  
when  
placed in the next available location. Simply  
displayed.  
is  
Any  
F Q  
To Store a Number in the Mobile Phonebook  
1
2
3
From Idle enter the phone number and  
F A  
Use to select Mobile Phonebook and  
a
F Q  
Enter the name - see “Text Entry” page 66,  
F a  
4
5
Confirm phone number  
twice  
F Q  
Use to select a group - see “Grouping Phonebook Entries” page  
e
17 - into which to place the entry  
F Q  
6 Enter location number  
F Q  
A location number does not have to be specified.In this case the entry  
will be placed in the next available location. Simply  
is displayed.  
when  
Any  
F Q  
14  
 
Phonebook  
Overwrite Protection  
If a location is occupied, a prompt will be displayed to confirm that the  
current information is to be overwritten.  
to overwrite the selected location  
F Q  
to choose another location number  
F B  
Note: If you amend an entry stored in your phonebook that has a Voice  
Dial Command assigned to it, you will need to delete and reassign that  
Voice Dial Command - see “Editing the Voice Dial Entries” page 20.  
Browsing Phonebook  
You can search the Phonebook by either Name or Location. The default  
setting for browsing is by name. When browsing by name pressing a  
lettered key will take you to the first entry starting with that letter.  
1
2
3
From Idle  
, select Phonebook > Browse  
F Q  
Use to toggle between Names or Loc. Nos.  
F Q  
e
F Q  
Use to select the Phonebook you wish to browse  
e
F Q  
Retrieve a Number  
1
2
From Idle  
F A  
Use to browse through the Phonebook and highlight the  
e
required entry  
F Q  
Use to select recall  
3
e
F Q  
Note: The Phonebook you last viewed will be the default when you next  
. To change the default, use the Phonebook menu to select a  
F A  
particular phonebook.  
Speed Dial a Number Stored in SIM Phonebook  
1
2
3
From Idle Enter location number – leading zeros may be left out  
F #  
F D  
15  
 
Phonebook  
Editing Phonebook Entries  
It is possible to Detail, View, Recall, Edit, Delete or Create information  
in the Phonebook. To access any of these functions follow the same  
procedure for each one.  
With a phone number or name displayed:  
1
Use to cycle through Detail, View, Recall, Edit,  
Delete or Create  
F A  
e
2
to select an option  
F Q  
Detail  
Displays each element of the selected Phonebook entry. Use to display  
e
the next/previous element of the entry. Each element may be edited -  
F
, edit as required  
twice to save any changes.  
Q a Q  
F Q  
View  
Displays an individual name and phone number in the names list.  
Recall  
Displays the phone number, enabling you to either change it or call the  
number.  
Edit  
Displays the entry allowing you to make changes as required.  
twice to save any changes.  
F Q  
Delete  
Deletes the entry from the Phonebook.  
Create  
Creates a new entry in the Phonebook  
16  
 
Phonebook  
Grouping Phonebook Entries  
The ability to group phonebook entries together is an  
extra function of the Mobile Phonebook.  
Retrieving a Number from a Group  
Groups are used to collect together types of  
Phonebook entries, for example business and  
personal. Each group can be suitably titled for quick access to the entries  
contained within.  
An alert profile can be attributed to groups, or a phone number, thus  
allowing incoming calls to be tailored to indicate the type of caller. See  
“Alert Profiles” page 17.  
1
From Idle  
, select Phonebook > Group Setting and  
F Q  
or from Idle  
twice  
F Q  
F A  
2
3
Use to select the group  
twice  
F Q  
e
Use to select the entry required  
twice to recall the  
e
F Q  
number  
Retitling Group Names  
1
From Idle  
, select Phonebook > Group Setting  
F Q  
F
Q
2
3
Use to select the group required  
e
F Q  
Use to select Edit  
e
F Q  
Clear the current title and re-enter - see “Text Entry” page 66  
4
twice to save any changes  
F Q  
Alert Profiles  
Alert Profile enables you to identify callers with a particular ring tone,  
display picture/Animation, making it easier to distinguish between callers or  
groups of callers.  
Creating an Alert Profile  
1
From Idle  
, select Phonebook > Alert Profile  
F Q  
F
Q
2
3
4
,select Add or Insert from the pop up menu  
F Q  
Use to select Personal or Group  
e
F Q  
Recall the phone number / select group from the Phonebook – see  
“Retrieve a Number” page 15  
F Q  
17  
 
Phonebook  
5
6
Use to select the ring tone that you wish to use for this profile  
e
F Q  
Use to select the picture  
e
F Q  
Hot Key Phone Numbers  
It is possible to dial phone numbers from the Phonebook or Service Dial  
part of Phonebook very quickly. Some Hot Key Phone numbers may be  
reserved by the Service Provider, for example the first three Hot Key  
Phone numbers may be linked to Service Dial (  
).  
R
1
2
+ Hold a Digit key  
-
F
1
9
F D  
Note: In some instances, a long press on the  
games menu  
key will initiate the  
9
Setting the Hot Key Dial Source  
1
From Idle  
, select Phonebook > Hot Key Dial  
F Q  
F
Q
2
Use to select SIM Phonebook or Mobile Phonebook and  
e
F
Q
Info Numbers or Service Dial  
Your Service Provider may program some special phone numbers into your  
SIM (  
). It is not possible to modify these  
R
1
2
+ Hold  
F
A
to browse through the Service Dial list of phone numbers  
F e  
The phone number pointed to can only be recalled or dialled.  
Review the Phonebook  
The Review function in the Phonebook menu shows how many locations  
are available in the Phonebook.  
1
2
From Idle  
, select Phonebook > Review  
F Q F Q  
Use to select SIM Phonebook or Mobile Phonebook  
e
F
Q
A summary of the selected Phonebook will be displayed.  
18  
Phonebook  
Using Voice Commands  
Before any of the phone’s voice activated functions can be used, it is  
necessary to configure the phone so that it will recognize a particular voice  
and intonation.  
Voice Dial Entry Setup  
This function allows the user to recall and dial numbers from the  
Phonebook using voice commands.  
1
From Idle  
Voice Dial  
, select Phonebook > Voice Command >  
F Q  
F Q  
2
3
to add a new Voice Dial entry to the list  
F Q  
Browse through the Phonebook to select an entry which is to be  
attributed with a voice command, twice  
F Q  
Note: Each recording is short in length, so be prepared to speak soon after  
initiating the recording.  
4
When ready, the user should hold the phone approximately 20cm  
from his/her mouth, and speak clearly into the  
F Q  
microphone to record the name of the selected Phonebook entry  
When the recording has stopped, it will be necessary to repeat the name.  
When prompted, and repeat the name  
5
F Q  
When recording is completed for a second time, the display will indicate if  
the recording was successful or not. If unsuccessful, repeat from step 4.  
Recalling Voice Dial Entries  
From Idle move and hold the navigation key ( ) in any one of the four  
g
directions , , or . Speak clearly the name you wish to recall (exactly  
a b c  
d
as recorded) and wait.  
The above procedure will recall the phone number and the recorded Voice  
Dial entry is repeated; to initiate the call  
.
F D  
19  
 
Phonebook  
Dialling Voice Dial Entries  
Using Permission  
From Idle  
, select Phonebook > Voice Command >  
F Q  
Permission  
F Q  
With this function enabled a recalled phone number is automatically dialled  
without further intervention.  
Repeat this process to disable the Permission function returning to Voice  
Dial recall only.  
Editing the Voice Dial Entries  
It is possible to add to, play or delete any of the Voice Dial entries. With a  
Voice Dial entry displayed:  
and use to select Add, Play or Delete to  
F Q  
F Q  
e
select the desired option  
Add  
To add a new Voice Dial entry.  
Play  
To listen to the recording of a Voice Dial entry.  
Delete  
To delete an entry  
20  
 
My Numbers  
My Numbers  
My Numbers is a convenient part of Phonebook where voice, fax and data  
phone number(s) can be stored and viewed. (M)  
Adding Numbers  
1
From Idle  
, select Phonebook > My Numbers  
F Q  
F
twice  
Q
2
3
Use until Create is displayed in the pop up menu  
Enter the name - see “Text Entry” page 66, and use  
e
F Q  
a
Note: If using T9® text input then move  
an alternative word will be selected.  
before moving otherwise  
c
a
4
5
Enter the phone number  
twice  
F Q  
Enter location number or select  
Any  
F Q  
Viewing Stored Numbers  
1
From Idle  
, select Phonebook > My Numbers  
F Q F  
Q
2
3
Use to select View or Detail from the pop up menu  
e
F Q  
If more than one number is available then use to cycle through  
e
the listed numbers  
21  
 
Personalising Your Phone  
Personalising Your Phone  
Add a Start-up Greeting  
A personalised greeting can be programmed for  
when the phone is switched on.  
1
From Idle  
, select Personalise >  
F Q  
Display Setting > Greeting  
F Q  
Use the text entry facility to add a greeting  
twice - see “Text Entry” page 66  
2
T9  
Menu  
F Q  
Displaying Animations  
Animations can be displayed during the phone  
power on and off sequences  
Animation  
Off  
1
From Idle  
, select Personalise >  
F Q  
Display Setting > Animation  
Gems Forever  
Purple Haze  
F Q  
2
Use to cycle through the animated themes  
available  
e
View  
3
4
Use  
to view  
A
to select either the desired theme, or switch off the  
F Q  
animation  
Idle Screen Image  
The idle screen can be changed to display colour downloaded images or  
Colour Themes.  
To choose an image for the Idle screen:  
1
From Idle  
F Q  
Idle Screen  
select Personalise > Display Settings >  
2
3
4
Use to navigate select the required image  
e
Use  
to view image  
A
F Q  
It is possible to view the selected image before fixing it to the Idle screen.  
When  
is displayed in the secondary selection area  
.
View  
FA  
22  
 
Personalising Your Phone  
Media Folders  
This option enables the user to manipulate the media files which have been  
downloaded from a third party source and are saved in the handset. Some  
of these can be used as ring tones, or Idle screen images or attachments to  
text messages.  
Note: It is only possible to attach EMS format Animations/Pictures  
To select an item from the Media Folder:  
1
From Idle  
select Personalise > Media Folders  
F Q  
F Q  
2
3
Use to select the media type  
e
F Q  
Use to select an object  
e
Use to view the selected file before making any changes to the file.  
e
4
and use to select  
,
Rename Delete Delete All  
or  
F Q  
F Q  
e
at any time to return to the Media Folders sub menu  
F B  
Colour Themes  
The purpose of the Themes, is to provide alternative combinations of  
colours for the background and text.  
To use a Colour Theme:  
1
From Idle  
select Personalise > Display Settings >  
F Q  
Colour Themes  
F Q  
to preview the Colour Theme  
2
3
Use  
A
Use to select the required Colour Theme  
e
F Q  
To return to the Idle screen  
F E  
Changing the Ring Tone  
Voice Calls:  
The ring tones of the phone can be changed to one  
of many pre-defined sounds, a downloaded ring tone  
or a voice ringer (voice recording used as a ring  
tone).  
Type  
1
2
3
4
Type  
Type  
Type  
All voice, fax, data and messages can have a different  
ring tone.  
Play  
To change the Ring Tone:  
1
From Idle  
select Personalise > Tones > Ring Type  
F Q  
F Q  
23  
 
Personalising Your Phone  
2
3
4
5
Use to select the call type to be adjusted  
F Q  
e
Use to select the required ring tone  
e
to preview the ring tone  
F A  
to confirm ring tone selection  
F Q  
Alternatively you can use the Melody Composer to generate a custom ring  
tone. See “Composing a Melody" page 27.  
Recording a Voice Ringer  
1
2
3
From Idle  
, select Personalise > Tones > Voice  
F Q  
Ringer  
F Q  
Use to select the appropriate voice ringer to be changed  
e
F
Q
, start speaking into the microphone. The recording will  
F Q  
stop automatically, or before if  
is selected  
Q
To playback the recording use to select the appropriate voice ringer  
e
, select Playback  
F Q  
F Q  
Disabling/Enabling all Tones  
1
2
3
From Idle  
, select Personalise > Tones  
F Q F Q  
F Q  
Use to select Disable or Enable  
e
F Q  
When Idle is resumed the silent indicator icon ( ) will be displayed  
[
24  
Personalising Your Phone  
Download data (  
)
R
The Panasonic GD67 is able to use various downloaded data. The  
downloaded data is stored in the Media Folder and can be acquired via  
EMS, SMS or WAP. Details of this service are available on our website.  
For further information see:  
http://www.panasonicbox.com  
Download Animations, Pictures & Melodies  
Animation, Picture & Melody data can be downloaded using EMS, SMS  
(services supplied by a third party)  
Download Animations  
Animations may be downloaded to the phone using EMS.  
This service is network dependent.  
The service may not be available in all countries.  
Downloaded animations are stored in, and retrieved from: Personalise >  
Media Folders > Animations  
If an SMS or EMS has been received containing an animation:  
1
2
to acknowledge receipt of the animation  
F Q  
Use to select the SMS or EMS  
twice  
F Q  
e
The Animation is now stored and can be selected as required.  
Download Pictures  
Pictures may be downloaded to the phone using WAP. Details of this  
service are available on our website.  
This service is network dependent.  
For further information see:  
http://www.panasonicbox.com  
The service may not be available in all countries due to regulatory  
restrictions so please check the above site for availability.  
Downloaded Pictures are stored in, and retrieved from: Personalise >  
Media Folders > Pictures If an SMS or EMS has been received  
containing a Picture:  
1
2
to acknowledge receipt of the picture  
F Q  
Use to select the SMS or EMS  
twice  
F Q  
e
The Pictures is now stored and can be selected as required.  
25  
 
Personalising Your Phone  
Download Melody  
Melodies may be downloaded to the phone using SMS or EMS. Details of  
this service are available on our website.  
This service is network dependent.  
For further information see:  
http://www.panasonicbox.com  
The service may not be available in all countries due to regulatory  
restrictions so please check the above site for availability.  
When a message has been received containing a melody:  
1
2
to acknowledge receipt of the melody  
Use e to select the ring tone number to overwrite Z Q  
F Q  
twice  
The melody is now stored and can be selected as a ring tone.  
26  
Personalising Your Phone  
Composing a Melody  
From Idle  
, select Personalise > Tones > Melody  
F Q  
Composer  
F Q  
Using the following table as reference, enter the notes (from the choice of  
low, middle and high), rests, and the durations of each, to generate your  
composition.  
Note: At any time during composing  
melody.  
to play back the current  
F A  
When the composition is complete  
twice to save it.  
F Q  
Key  
1st press  
2nd press  
3rd press  
4th press  
5th  
press  
C
D
E
C#  
D#  
low C  
low D  
high E  
low F  
low G  
low A  
low C#  
low D#  
high C  
high D  
1
2
3
4
5
6
7
8
9
0
*
#
low E  
F#  
F
low F#  
low G#  
low A#  
high F  
high G  
high A  
G
A
B
G#  
A#  
low B  
Rest  
1/8  
1/4  
1/2  
1/1  
1/16  
Sharp  
1 Indicates a note from the second octave  
2 Indicates "Sharp" is not available to these notes  
27  
 
Personalising Your Phone  
Editing your Melody  
Once the melody has been saved the following operations can be used for  
re-editing purposes:  
to delete the character to the left of the cursor  
F B  
Use to navigate the cursor around the screen  
g
Use the relevant keys to insert new notes/rests  
Setting the Backlight Time  
1
From Idle  
, select Personalise > Display Setting >  
F Q  
Backlight Time  
F Q  
Use to cycle through the times available  
2
3
e
to select the desired time  
F Q  
Changing the Language  
It is possible to change the language that the phone  
uses for either display messages and/or text  
Display Language  
Tegic Language  
entry.(  
)
R
1
From Idle  
Language  
, select Personalise >  
F Q  
F Q  
1
2
3
Use to select Display Language or Tegic  
Language (text entry) that you wish to  
e
change  
F Q  
Use to select the desired language  
e
F Q  
Restoring the Default Phone Settings  
Any personal settings can be returned to their factory default, with the  
exception of some features, such as the Phone Lock code and the  
Language.  
1
2
From Idle  
, select Personalise > Defaults  
F Q F Q  
to restore the default settings  
F Q  
28  
 
Phone Security  
Phone Security  
The phone features a number of security functions that protect against  
unauthorized use, and enable the user to restrict access to certain features -  
see “Using the PIN” page 12. It is recommended that all security codes are  
memorized. If it is necessary to make a note of any security codes, never  
write them in a way that they can be recognized by another person. If  
forgotten, contact the dealer for the Phone Lock Code or the Service  
Provider for PIN and PIN2.  
Enabling Key Guard  
The Key Guard function is used to prevent any keys  
from being accidentally pressed e.g. when the phone  
is being carried.  
From Idle  
, 3 times or  
F Q  
+ Hold  
,
Q
F Q  
select Key Guard,  
F
twice.  
When a call is received Key Guard will be disabled  
temporarily, allowing the user to press any key  
except  
to answer the call. Emergency calls can still be made - see  
E
“Emergency Calls” page 10.  
Note: When making emergency calls with the “Key Guard” enabled, there  
will be no audible or visual indication that the number is being dialled  
Disabling Key Guard  
any key,  
F
When Free is displayed  
F A Q  
Changing the Security Codes  
1
2
3
From Idle  
, select Phone Option  
F Q  
> Security  
F Q  
Use to select Phone Lock, PIN or PIN2  
e
F Q  
Use to select Change  
e
F Q  
29  
 
Phone Security  
4
5
6
Enter the current code  
Enter the new code  
Verify the new code  
F Q  
F Q  
F Q  
Restricting Calls  
Call Barring  
The Call Bar function is used to restrict certain outgoing and/or incoming  
calls. Call Bar is controlled by a security password that is supplied by the  
Service Provider. When updating or checking the status of Call Bar the  
phone must be registered with a network. Different Call Bar restrictions  
can be used for voice, fax and data calls. Any combination of call restrictions  
can be set.  
1
2
3
4
From Idle  
, select Phone Option  
F Q  
> Security > Call Bar  
twice  
F Q  
Use , select Bar Voice, Bar Fax or Bar  
e
Data  
twice  
F Q  
Use to select the level of call barring that  
e
needs to be applied and  
F Q  
Enter Call Bar password and  
F Q  
Barred Dialling  
The Barred Dial function enables the user to bar all phone numbers  
pre-programmed in the SIM from being dialled on the phone. To use this  
function PIN2 is required.  
1
From Idle  
, select Phone Option > Security > Barred  
F Q  
Dial  
F Q  
2
Enter PIN2  
F Q  
Fixed Dial  
The Fixed Dial Store is part of Phonebook, but with additional security.  
When the security feature Fixed Dial is enabled it is only possible to make  
calls with phone numbers that are in the Fixed Dial Store.  
When Fixed Dial is enabled any manually dialled phone numbers must  
match a phone number in the Fixed Dial Store.  
To store, edit or delete a phone number in the Fixed Dial Store the Fixed  
Dial function must be enabled. With Fixed Dial enabled, all phone numbers  
can be added, edited or deleted as normal, but you will be prompted for  
PIN2.  
30  
 
Phone Security  
“Wild” Numbers  
Wild numbers are spaces that can be stored in a phone number. The “wild”  
numbers must be filled before the phone number is dialled. Used in  
conjunction with Fixed Dial calls can be restricted, for example, to a specific  
area by storing the area code of a phone and when recalled the remainder  
can be added. The “wild” numbers can be anywhere within a stored phone  
number.  
1
2
+ Hold  
until  
is displayed to enter a wild number  
F
0
_
When the phone number is recalled pressing a numeric key will fill  
in a “wild” number  
31  
Applications  
Applications  
Clock  
This phone incorporates a clock with date/time, an alarm and a power  
on/off feature.  
A second clock for dual time is also included - see “Second Clock” page .64  
Initially Setting the Home Time  
1
From Idle  
, select Applications >  
F Q  
Clock Function > Clock Set > Home >  
Time Set, use to select Summer Time on  
e
or off ,  
F Q  
Enter the digits for the date in the format  
2
3
day/month/year  
the date  
Enter the digits for the time  
twice to accept  
F Q  
twice to accept the time  
F Q  
Setting the Clock Format  
1
From Idle  
Clock Function > Clock Format >  
, select Applications >  
F Q  
Display Format  
F Q  
2
3
Use to cycle through the different clock  
and/or date formats or disable  
e
to select the desired clock display  
F Q  
type  
32  
 
Applications  
Altering the Time/Date  
1
From Idle  
, select Applications > Clock Function >  
F Q  
Clock Set > Home > Time Set  
F Q  
Enter the digits in the format day/month/year  
twice to accept the date  
2
3
4
F Q  
Enter the digits  
twice to accept time  
F Q  
Setting the Clock for Summer Time  
1
From Idle  
, select Applications > Clock Function >  
F Q  
Clock Set > Home > Summer Time  
F Q  
F Q  
2
to set Summer Time On or Off  
F e  
Setting the Alarm  
If the clock hasn’t been set, the user will be prompted to do so prior to  
setting the alarm.  
There are four separate alarms, each of which may be set independently.  
1
From Idle  
, select Applications > Clock Function >  
F Q  
Alarm Set  
F Q  
Use to select the alarm to be set  
2
3
4
5
e
F Q  
F Q  
Use to select the frequency of the alarm  
Enter the digits for the time  
e
F Q  
will be  
Use to select the ring type  
e
F Q  
When the alarm has been set, and the clock is displayed,  
displayed when the phone is in Idle.  
?
The alarm is activated in accordance with the current clock (Home or  
Second).  
Muting the Alarm  
When the set time is reached the alarm will sound and the display will flash  
with an alarm message. The alarm will sound for 30 seconds. If the alarm is  
due during a call, it will activate vibration alert.  
To end the alarm:  
any key  
F
33  
 
Applications  
Disabling the Alarm  
1
From Idle  
Alarm Set  
, select Applications > Clock Function >  
F Q  
F Q  
2
3
Use to select the alarm to be disabled  
three times  
F Q  
e
Use to select Disabled  
e
F Q  
When disabled, following the same procedure will re-enable the alarm.  
Adjusting the Alarm Time  
1
From Idle  
, select Applications > Clock Function >  
F Q  
Alarm Set  
F Q  
Use to select the alarm to be adjusted  
2
3
4
5
6
e
F Q  
to remove the current alarm time  
+ Hold  
F
B
Enter the digits for the time  
twice  
F Q  
Use to select the frequency of the alarm  
e
F Q  
Use to select the ring type  
e
F Q  
Setting a Power On/Off Time  
The phone can be set to turn itself on or off  
automatically at a specified time using the Power  
On/Off feature. The procedure for setting/adjusting  
the Power On/Off automatically is similar to that for  
setting the time on the clock. For either setting or  
adjusting the time needed to select Power On  
Time or Power Off Time in the Clock Function  
menu.  
Caution: Ensure that the setting of the Alarm or Power On function will  
not contravene any regulations whereby it may automatically power on  
when in an aircraft or medical facility etc. - see “Important Information”  
page i.  
34  
 
Applications  
Calculator  
The four function calculator will enable the user to  
perform simple arithmetic calculations  
(addition/subtraction/multiplication and division).  
1
2
From Idle  
, select Applications >  
F Q  
Calculator  
F Q  
Enter a number (maximum 10 digits) and it  
will be displayed on the upper right of the  
display. If a decimal point is required,  
F #  
to select the arithmetic operation you wish to perform (  
3
4
Use  
g
b
to multiply,  
to add, to divide,  
to subtract)  
c
a
d
Enter a number (maximum 10 digits) and it will be displayed next to  
the operation symbol  
If  
is used to select another arithmetical operation to perform, an  
g
intermediate calculation will be performed and the result displayed on the  
top line.  
5
to complete the calculation when is displayed in the  
=
F A  
left operation area  
Currency Convertor  
The currency convertor enables the user to convert from/to a home  
currency using a conversion rate that you enter.  
From Idle  
, select Applications > Currency  
F Q  
F Q  
Entering an Initial Conversion Rate  
1
2
F Q  
Enter an abbreviation for the home currency (up to 3 characters)  
twice  
F Q  
Enter an abbreviation for the foreign currency (up to 3 characters)  
twice  
3
4
F Q  
Enter the currency conversion rate  
twice  
F Q  
35  
 
Applications  
Converting a Value  
1
Check the conversion rate is the one you require  
twice  
F Q  
2
Enter the value to be converted  
twice  
F Q  
The conversion rate will be retained in the phone once entered. The next  
time the convertor is used, the conversion rate / currency abbreviation can  
be edited while in the Currency /rate display.  
, then use to  
F Q  
e
select  
Edit  
F Q  
Swapping the Currency Conversion  
When you have accepted the conversion rate and are ready to enter the  
value to be converted, you can swap the currencies to convert from the  
foreign currency into the home currency.  
1
2
, use to select  
Swap  
F Q  
e
F Q  
twice  
Enter the value for conversion  
F Q  
36  
Text Messages  
Text Messages  
It is possible to receive, display, edit and/or send single or concatenated text  
messages to mobile phones on the same network or any network that has a  
roaming agreement. Before the message is sent, the user will be informed  
of the number of text messages that will be sent if it is greater than one.  
Setting the Phone for Short Text Messages  
Before a message can be sent, it is necessary to enter the Message Centre  
number into Parameters (the Service Provider will supply the Message  
Centre number).  
The Message Centre number may have been preprogrammed on the SIM.  
Setting the Message Centre Number  
From Idle  
, select Messages > Parameters > Message  
F Q  
Centre  
F Q  
Enter message centre number in international dial format – see  
“International Dialling” page 9.  
Creating a Text Message  
1
From Idle  
, select Messages >  
F Q  
Create  
F Q  
2
, use to chose Text Entry mode  
F A  
e
from a pop up menu  
F Q  
to cancel the pop-up menu without  
T9  
F B  
changing text selection  
Menu  
Note:  
menu  
will take the user directly to the Text Message main  
F B  
Create a text message - see “Text Entry” page 66.  
The Character menu is not available in “Numeric mode”. In text modes it  
may be accessed by  
+ Hold  
-
or  
, use to  
F
1
9
F A  
e
select Char. List from the pop up menu,  
.
F Q  
Or in T9 mode  
+ Hold  
.
F
1
to exit the character menu.  
F B  
3
Use  
to navigate through the message and add or delete text  
g
4
twice  
F Q  
37  
 
Text Messages  
The user may be prompted to send the message. If the message is not to  
be sent  
, the message will be stored.  
F A  
5
and enter the destination phone number (or recall a  
F Q  
number from the Phonebook) - see “Retrieve a Number” page15  
twice  
F Q  
The user may be asked if delivery confirmation is required. If not  
6
required use to select No  
. If yes, use to select Yes  
e
F Q  
e
F Q  
The default setting for delivery confirmation can be enabled/disabled using  
the Report parameter in the Parameters menu.  
Text Attachments  
When creating a text message, it is possible to include attachments.  
(Copyright permitting)  
To include an attachment:  
1
2
From Create/Edit  
, from the pop menu, select  
Insert  
F Q  
Use to make a selection from the pop-up menu and  
to  
e
F Q  
select.  
3
Use to select the required file to be inserted into the text body,  
e
F Q  
Receiving Text Messages  
When a Short Text Message is sent to the phone, the message "Received 1  
New Message" and the message indicator ( ) will flash in the display, with  
N
an audible tone or vibration. This indicates that a new message has been  
received.  
When Read is displayed  
navigate through the message and to identify the sender and the time  
to read the message. Use to  
F Q  
e
the message was sent. With the phone number shown  
To dial the phone number.  
F D  
Note: If the message indicator is displayed constantly (does not flash) this  
indicates that the message area is full and you will need to delete old  
messages in order to be able to receive new messages in the future.  
38  
 
Text Messages  
Message Options  
Reply to a Message  
When a message is received and read the option to reply to the sender may  
be selected.  
twice. This will allow the user to create a reply message  
F Q  
Delete a Message  
1
2
F Q  
Use to select Delete  
to delete the message  
F Q  
e
To enable the auto-deletion of messages - see “Parameters” page 42.  
Edit a Message  
1
2
F Q  
Use to select Edit  
to edit the message  
e
F Q  
, this will give the option to send the edited message - see  
F B  
the message and it will be stored in the Send List.  
F Q  
“Creating a Text Message” page 37.  
if it is not necessary to send  
Cut / Copy & Paste Message Text  
This function allows the user to cut or copy message text from a user  
defined message or a user created message, into a new or existing message.  
It can also be used to paste text to a previously sent message - See “Edit a  
Message” page 39.  
1
2
3
When message text is displayed,  
, select Cut or Copy  
F Q  
F Q  
Use  
or copied  
Use  
to position the cursor at the beginning of the text to be cut  
g
F Q  
to highlight the required text  
g
F Q  
The cut or copied text will remain in the phone memory until other text is  
cut or copied.  
4
Select the required text screen for cut or copied text to be pasted  
into  
F Q  
Select Paste  
5
F Q  
To cut or copy text from a received message, select Forw’d and repeat  
steps 1 - 3.  
39  
 
Text Messages  
Manage Messages Lists  
All messages, whether sent or received, will mostly be stored in the phone  
until they are deleted. Selecting a stored message allows it to be replied to,  
edited or deleted.  
Inbox  
Messages received will be stored in the Inbox. A  
indicates an unread message.  
in the receive list,  
N
When reading a message the sender’s information is displayed below the  
text. to show the sender’s ID (if available), the time the message  
F e  
was sent.  
twice allows the user to reply to the message.  
F Q  
From the Inbox, it is possible for the user to Forward a received message,  
Extract text from a message and forward it or Chat with the sender of the  
message. See Chat SMS page 40.  
Outbox  
When a message has been sent or edited it will be stored in the Outbox.  
Create  
This allows the user to create a new message or reply to a received  
message.  
Chat SMS  
Chat, will enable the user to read sent and received messages on one  
screen when in Chat SMS mode with another party.  
1
When reading a previously sent or received message,  
F Q e  
Q
to select chat  
2
3
Enter the destination phone number,  
Enter your Nick name (up to 18 characters) - see "Text Entry" page  
66.  
F QQ  
It is now possible to Chat with the other party, providing they have the chat  
SMS facility on their phone. Enter your message - see "Text Entry" page 66.  
When receiving a message in chat mode, the text will appear automatically  
above your previous message.  
4
, select  
to continue the chat  
OK  
F Q  
40  
 
Text Messages  
If the phone is not in chat mode when receiving a reply to a chat message, it  
will be received as a normal sms. If a voice call is received when in chat  
mode, the phone will allow the user to accept the incoming call and return  
to chat mode at the end of the call.  
5
To exit chat mode  
F Qe Q  
The last sent message will be stored in the Out box.  
The last part of the received message will be stored in the In box.  
All other messages from the latest chat, will automatically be deleted from  
the phone.  
It is also possible to initiate chat mode from the Messages menu.  
Cell Broadcasts  
The user will need to specify the topic(s) of information that is to be  
received as broadcasts before they can be received. It is important that the  
user ensures the list is empty in order to receive optimum broadcasts.  
1
From Idle  
F Q  
F Q  
, select Messages > Broadcasts > Topics  
F Q  
2
3
4
5
to insert a new topic  
Use to cycle through the available topics  
e
select RX On from the pop up menu  
F Q  
to insert the currently displayed topic into your broadcast  
F Q  
list  
Note: There are 3 Cell Broadcast options: Not Receiving, Receiving and  
Receive and Notify Upon Arrival  
Message List  
This is a store for the last received broadcast messages. Messages can be  
deleted from here.  
Language  
The language in which broadcast messages are displayed can be changed  
(
).  
R
Enabling/Disabling Cell Broadcasts  
1
2
3
From Idle  
, select Messages > Broadcasts  
F Q  
Select receive  
F Q  
F Q  
Use and select Enable/Disable  
e
F Q  
Note: The pop menus may vary in appearance.  
41  
 
Text Messages  
When enabled, following the same procedure will disable broadcasts.  
When a low priority broadcast has been received,  
will be displayed on  
$
the Idle screen and a notification tone may sound (if enabled) . If a high  
priority broadcast is received, it's text content will be displayed on the idle  
screen  
Notify Tone  
To enable the notification tone for Cell Broadcast:  
1
From Idle  
select Messages > Broadcasts > Notify  
F Q  
Tone  
F Q  
2
3
Use to highlight Enable  
e
to select  
F Q  
To disable the notification tone, follow the same procedure and select  
Disable in the Notify Tone menu  
Parameters  
From Idle  
, select Messages > Parameters  
F Q  
F Q  
The following parameters can be set:  
Recipient Group  
There are 5 different recipient groups, allowing you  
to store up to ten destinations in each.  
Recipient Group enables the user to pre-define the  
destination of text messages.  
42  
 
Text Messages  
Setting Recipient Group  
1
From Idle  
, select Messages >Parameters >  
F Q  
Recipient Group  
F Q  
select  
To enter a new name,  
and enter the name of the  
Select  
F Q  
recipient from a name stored in one of the phone books, See Retrieve a  
Number page 15.  
twice, select  
from the pop up menu  
OK  
F Q  
F
Q
Auto Delete  
When set, will erase messages automatically:  
Received Read - will overwrite the oldest read message.  
Received Any - will overwrite the oldest message, even though it may not  
have been read.  
Lifetime  
This is the duration that your message is stored at the Message Centre.  
Delivery attempts will be repeated until the message has been delivered or  
the Lifetime expires.  
Message Centre  
Allows the Message Centre phone number to be edited - see “Setting the  
Phone for Short Text Messages” page 37.  
Report  
When your message has been delivered a confirmation will be received if  
Report is set to Yes.  
Protocol  
The Message Centre may be able to convert the message to the format  
specified by the selected protocol.  
43  
Call Information  
Call Information  
Recent Numbers  
Recently dialled phone numbers will be stored in Last Dialled.  
If Caller Identification is available the caller’s phone number, for an  
answered call will be stored in the Answered menu and an unanswered  
call will be stored in the Unanswered menu.  
If Caller Identification is not available then calls will still be stored but will  
have the date and time attributed to them.  
When the store is full the next phone number will overwrite the oldest.  
1
2
From Idle  
F D  
Use to select Last Dialled, Answered or Unanswered  
e
F
Q
3
Use to select the phone number (or name) you wish to redial  
e
F D  
You can edit or delete the phone number before dialling – see “Editing  
Phonebook Entries” page 16.  
If you wish to store the selected number in Phonebook,  
while  
F A  
the number is displayed – see “Store a Number” page 14.  
Calling the Last Dialled Number  
To redial your last called phone number  
twice.  
F D  
Returning an Unanswered Call  
When the display shows that you have received calls but not answered  
them.  
1
F Q  
The last caller’s phone number will be displayed if it is available.  
2
3
Use to select the phone number you wish to dial  
e
F D  
44  
 
Call Information  
Call Duration  
1
From Idle  
, select Phone Option > Call Service >  
F Q  
Calls  
F Q  
Note: The Calls function is SIM dependent (  
). If the SIM does not  
M
support this function then items under Calls menu will be found directly  
under Call Service menu.  
2
Use to select one of the functions  
e
described below, and  
F Q  
The Last Call function will display the duration and  
call charge if available, of the last call, when iin Idle  
mode. Times are indicated as: hours (0-99), minutes  
(0-59), seconds (0-59) - HH:MM:SS.  
The All Calls function displays the accumulated  
duration and call charge, if available, of Incoming and Outgoing calls. The  
lock code or PIN2 is required to reset the timer and call charge.  
GPRS Call Duration  
1
From Idle  
F Q  
Connections  
, select Phone Option > Call Service >  
F Q  
Note: The Connections function is SIM dependent (  
).  
M
2
Use to select one of the functions described below, and  
e
F
Q
The Last Connection function will display the duration and amount of data  
transfer of the last call. Times are indicated as: hours (0-99), minutes (0-59),  
seconds (0-59) - HH:MM:SS.  
The All Connections function displays the accumulated duration and  
amount of data transfer. The lock code or PIN2 is required to reset the  
timer.  
The Call Priority function is used to determine whether or not an incoming  
voice call should interrupt a data call.  
45  
 
Call Information  
Call Charges  
To maintain control over the cost of calls that are made, the phone can be  
set to restrict use to a finite number of units overall. (Q)  
Setting the Unit Price  
Firstly, a price per unit must be entered. This is the cost that the Service  
Provider charges for one unit of call time. (Q)  
1
From Idle  
, select Phone Option > Call Service >  
F Q  
Service Charges > Price/Unit  
F Q  
2
to edit the values  
F Q  
At this point you will be asked to enter your PIN2 or Lock code  
.
F Q  
F Q  
3
Enter a currency unit (up to three characters) e.g. GBP  
twice  
4
Enter a price  
twice  
F Q  
Setting the Maximum Unit Level  
This function allows the user to pre - determine the maximum cost of calls  
made. (  
)
M
1
From Idle  
, select Phone Option > Call Service >  
F Q  
Service Charges > Max Cost  
F Q  
twice to edit the values  
2
F Q  
At this point you will be asked to enter your PIN2 or lock code  
3
.
F Q  
Enter a value (number of units) which is to be the maximum  
permitted, and the corresponding cost will be displayed  
twice to accept  
4
F Q  
Note: The duration of one unit may vary during the day, peak and off-peak  
times. Therefore, the call charge can be calculated accordingly. However,  
call charge information may not give an accurate reflection of the tariffs  
charged by your Service Provider.  
46  
 
Call Information  
Setting a Warning Level  
A warning can be set as an indication that the maximum cost is about to be  
reached. (  
)
M
1
From Idle  
, select Phone Option > Call Service >  
F Q  
Service Charges > Warning at  
F Q  
2
3
twice to edit the value  
F Q  
Enter a value (in units) at which time you would like the warning to  
sound twice  
F Q  
Call Identification  
In the Call Service menu, the Caller’s ID and Withhold ID functions allow  
you to check the status of whether a Caller’s Identification is sent or can be  
received. (Withhold ID  
)
R
Note: When checking the status the phone must be registered with a  
network.  
47  
 
Advanced Operation  
Advanced Operation  
Diverting Calls  
Voice, fax and data calls can be diverted using different circumstances and  
to different numbers. For example you may wish voice calls to be diverted  
to Voicemail in the event that the phone is switched off.  
1
From Idle  
select Phone Option > Call Divert  
F Q F  
Q
2
3
4
Use to select the type of calls to divert,  
twice  
e
F Q  
Use to select the circumstances to initiate the divert  
e
F Q  
Enter phone number to divert to  
twice  
F Q  
When a divert situation is enabled the divert icon ( ) is displayed.  
t
When updating or checking the status of Call Divert the phone must be  
registered with a network. (  
)
R
Holding Calls and Call Waiting  
Holding a Call  
During a call:  
1
2
F Q  
Use to select Hold  
e
F Q  
Resuming a Call  
1
2
F Q  
Use to select Resume  
e
F Q  
Making a Second Call  
1
Enter phone number (or recall from Phonebook – see “Retrieve a  
Number” page 15)  
2
F D  
The first call will be placed on hold.  
48  
 
Advanced Operation  
Receiving a Second Call  
A second call can be received, if Call Waiting is switched on. This is enabled  
from the Phone Option > Call Service menu. It is not possible to have  
more than one fax or data call. All voice calls must be ended before you can  
make or receive a fax or data call. (  
)
M
Accept a Second Call  
1
2
F Q  
Use to select Accept  
e
F Q  
The current call will be placed on hold.  
Reject a Second Call  
1
2
F Q  
Use to select Reject  
e
F Q  
End Current Call and Receive Second Call  
1
2
with a waiting call  
F E  
any key except  
or  
F
E
g
Operation During Two Calls  
Swapping Between Calls  
The  
prompt in the display screen, indicates the current call  
!
1
2
F Q  
Use select  
Swap  
e
F Q  
End Current Call  
1
2
F Q  
Use to select  
End  
e
F Q  
The held call will remain held.  
End Both Calls  
F E  
49  
 
Advanced Operation  
Call Transfer  
With two calls connected, Call Transfer enables the user to connect them  
together ending your connection, leaving the other parties to talk together.  
(Q)  
When two calls are in use:  
1
2
F Q  
Use to select  
Trans.  
e
F Q  
The two calls will be connected to each other and your call will be ended.  
Note: Two call transfer cannot be utilized while in Multi-party mode.  
Multi-party Calls  
A Multi-party call enables three to five people to be in conversation at the  
same time. It is possible to swap between a Multi-party call and another call  
in the same way as with two separate calls. (  
)
M
Enabling Multi-party  
With two calls connected (one active, one on hold):  
1
2
F Q  
Use to select  
Merge  
e
F Q  
A Multi-party call has been enabled, all three people will be able to talk to  
each other.  
Adding to Multi-party  
It is possible to add to the Multi-party call (up to a maximum of five). Either  
by making a call or accepting an incoming call. The call can then be merged  
into the Multi-party.  
Note: When making a call or accepting an incoming call the Multi-party call  
will be placed on hold. The callers in the Multi-party call can continue to  
communicate with each other while on hold.  
Splitting a Multi-party  
The user can select an individual from the Multi-party and remove their  
connection. This enables you to talk privately without the participation of  
the rest of the Multi-party.  
50  
 
Advanced Operation  
During a Multi-party call:  
1
2
3
4
5
F Q  
Use to select  
Option  
e
F Q  
Use to select a caller in the Multi-party  
e
F Q  
Use to select  
Split  
e
F Q  
The selected caller will be split from the Multi-party call and the Multi-party  
call will be placed on hold (the remaining Multi-party callers can still  
communicate).  
Ending Multi-party Calls  
The user can either select an individual in the Multi-party and end the call or  
end the entire Multi-party call. If a call is held, or an other call is incoming  
then an individual call cannot be ended.  
Ending a Single Connection  
During a Multi-party call  
1
2
3
4
5
F Q  
Use to select  
Option  
e
F Q  
Use to select a caller in the Multi-party  
e
F Q  
Use to select  
End  
e
F Q  
Ending all Connections  
During a Multi-party call:  
to end all the calls at once  
F E  
51  
Advanced Operation  
Changing to a New Network  
When not in your home Country / Region, the user may use a network that  
is not directly subscribed to, this is called ROAMING. National Law may not  
permit roaming in your home region.  
The New Network function is used to manually select a network that is  
available in your current location.  
1
From Idle  
Network  
, select Phone Option > Network > New  
F Q  
F Q  
2
Use to select one from the list of available networks  
e
F Q  
If you cannot register with the selected network, that network will be  
greyed out.  
When the Search Mode is set to Automatic the phone will automatically  
reselect a new network in order to maintain optimum network availability.  
With the Search Mode set to Manual the phone will only use a selected  
network. If coverage is lost another network should be selected.  
The Network List is used when the Search Mode has been set to  
Automatic. The location numbers in the Preferred Network List show the  
search priority.  
Selecting Insert stores a new network in the currently displayed location  
and then moves other networks down, Edit overwrites the old network  
with a new one, and Add stores a new network at the end of the list.  
52  
 
Schedule  
Schedule  
The Scheduler can be used to register reminders for personal events as well  
as planning holiday periods.  
Caution: Ensure that any settings made in the Scheduler will not  
contravene any regulations whereby the phone may automatically power  
on when in an aircraft or medical facility etc. - see “Important Information”  
page i.  
Creating a Reminder  
From Idle  
, select Schedule  
F Q  
F Q  
1
2
Use the Navigation key ( ) to select the date for your reminder  
g
twice to create a new entry when the required date is  
F Q  
highlighted,  
twice  
F Q  
3
4
Enter the digits for the time using 12 or 24 hour clock  
twice  
F Q  
Use to select the frequency of the reminder  
e
F Q  
When selecting Daily, Weekly or Yearly you will be  
given the option of using the “Repeat Count”, which  
allows you to set the frequency of the alarm.  
5
Enter the memo for the reminder – see  
“Text Entry” page 66 , twice  
F Q  
6
Use to select a ring type for the reminder  
e
F Q  
Note: To indicate that a reminder has been set, the date will appear  
inversed.  
Viewing Reminders  
When in the Schedule menu, select the required  
date using the Navigation key (  
view reminders for that date  
)
to  
g F A  
53  
 
Schedule  
Deleting Reminders  
1
2
3
4
From Idle  
, select Schedule  
F Q F Q  
Use  
to select the required date of the reminder  
g
F A  
F Q  
Use to select the reminder to be deleted  
e
Use to select Delete  
twice  
F Q  
e
Setting a Holiday Reminder  
1
2
From Idle  
, select Schedule  
F Q F Q  
Use the Navigation key ( ) to select the day of your holiday  
g
F
Q
3
4
5
Use to select Function  
e
F Q  
Use to select Holiday Set  
e
F Q  
Use to select Day, Day of the week use to selct a day  
e
e
F
to update the Holiday List  
Q
Repeat process for each day of holiday as required.  
Note: To indicate that a holiday reminder has been set, the date/s will be  
emboldened  
Deleting Holiday Reminders  
To delete holiday reminders:  
1
2
From Idle  
, select Schedule  
F Q  
F Q  
Use the Navigation key ( ) to select the day of your holiday to be  
g
deleted  
F Q  
Use to select Function  
3
4
5
e
F Q  
Use to select Holiday Set  
e
F Q  
Use to select Holiday List,  
to select date for deletion  
e
F Q  
twice or to delete all holiday Reminders use , select All  
F Q  
Clear  
e
twice  
F Q  
54  
 
Schedule  
Jump to Date  
1
2
3
4
5
From Idle  
, select Schedule  
F Q F Q  
F Q  
Use to select Jump  
e
F Q  
to remove the current date  
+ Hold  
F
B
Using  
-
enter the date (using chosen date format) to  
0
9
which you want to ‘jump’ to  
twice  
F Q  
55  
 
Games  
Games  
Downloadable Games (  
)
R
The Downloadable Games menu enables the user to use one factory  
embedded game (Wallbreaker) and download another game from the  
games catalogue.  
Note: A downloaded game will overwrite the previously downloaded  
game.  
From Idle  
F Q  
Applications  
, select Games or select Games from  
The games banner will appear on the screen. To skip the banner  
introduction  
F Q  
and use to scroll through the games menu  
F Q  
e
to make a selection  
F Q  
Follow the screen prompts to navigate through the games menu.  
Full instructions on downloading and playing the range of games can be  
found in the games menu.  
Embedded Games (  
)
R
To enter the Embedded games menu:  
, select Games or select Games from Applications  
F Q  
Use to select a game  
e
F Q  
Follow the prompts in the pop up menu for playing instructions and game  
options  
56  
 
WAP Browser  
WAP Browser  
The phone’s WAP (Wireless Application Protocol) Browser enables the  
user to access Internet services supported by the network, such as news,  
weather reports, sport etc.  
Browser Settings  
Before Internet services can be accessed, the SIM must  
be data enabled and the relevant configuration  
information, entered into the phone.  
These settings may have been pre-programmed by the  
network operator.  
Note: Modifying previously entered settings can cause failure of the  
Browser.  
1
2
3
From Idle  
, select Browser > Browser Setting >  
F Q  
Server Setting  
F Q  
Two servers may be setup on the phone. Use to select one or  
other of the server settings  
e
F Q  
Use to select Edit  
e
F Q  
A list of configuration parameters will be displayed. The parameter Name  
will be highlighted and will be displayed.  
Edit  
4
5
6
F Q  
Enter the name of the WAP server  
twice  
F Q  
Use to select each of the other parameters in turn, edit the  
e
information  
twice  
F Q  
7
8
After all parameters have been entered,  
previous menu level  
Select the server setting that you have just edited  
to return to the  
F B  
. Use  
F Q  
e
to select Set  
F Q  
Record your WAP settings in the table at the rear of this booklet for  
easy reference.  
57  
 
WAP Browser  
Activating the Browser  
To activate the Browser, either:  
From Idle  
, select Browser > Start Browser  
F Q  
F Q  
The first time that the browser is activated there will be no content. Each  
time the browser is activated, the last page viewed from the previous WAP  
session will be recalled. (Cache is the phone’s memory that stores content  
downloaded in the past). At the start of a WAP session, the browser  
content may be retrieved from the cache. (At this stage the browser will  
remain off line) When data is required from the WAP server, the user will  
be prompted to Start a data call. If Yes is selected, the phone will go on  
line and the phone will go to the home page. (as defined by the network  
operator).  
Navigating Content  
Use the Navigation key ( ) to scroll through the content on the screen as  
g
follows:  
Use to scroll up/down on the current page  
e
Use to return to the previous object  
d
Use to return to the next selectable object  
c
When linked text (underlined text) is highlighted  
represented by the link.  
to load the page  
F Q  
The Browser Menu  
The Browser also contains its own menu which is applicable when content  
is currently being displayed (either on-line or off-line).  
To access the Browser menu  
to select the browser icon in the top  
F e  
or, while in the browser, it can be accessed by  
left of the screen,  
F Q  
+ Hold  
F
Q
This menu is used as follows:  
Back  
Returns the user to the Browser Start Up menu  
Home  
Displays the Home URL content as defined by the network operator.  
Exit  
Deactivates the Browser.  
58  
 
WAP Browser  
Mark Site  
Used to mark a location to return to later  
Bookmarks  
Use, add, delete and rename bookmarks.  
Inbox  
Used to retrieve a text message  
Save Image  
To save an image from the browser  
Reload  
Will reload and update the current page.  
Settings  
Allows the user to select the home URL, and allows the user pre-determine  
the functionality and speed of the keys. For example: the scroll speed.  
Access to the Security & Advanced menus is also available.  
About  
Provides information about the type of browser and security options  
Using Bookmarks  
Adding to the Bookmarks menu is gained via the "In Browser" menu.  
Frequently accessed pages may be bookmarked to save time. This prevents  
the need to re-enter the URL each time.  
Adding a Bookmark  
1
To access the Browser menu  
to select the browser icon in  
F e  
or, while in the browser, it can  
the top left of the screen,  
F Q  
+ Hold  
be accessed by  
F
Q
2
3
4
Use to select Mark Site  
Use e to select either Title or URL  
e
Use to confirm Title & URL to be stored. Scroll down until Save  
e
is displayed in the primary selection area and  
Z Q  
59  
 
WAP Browser  
Recalling Pages Using Bookmarks  
1
To access the Browser menu  
to select the browser icon in  
F e  
or, while in the browser, it can  
the top left of the screen,  
F Q  
+ Hold  
be accessed by  
F
Q
2
3
Use to select Bookmarks  
e
F Q  
Use to select the relevant bookmarks from the list,  
e
F Q  
Renaming a Bookmarks  
1
To access the Browser menu  
to select the browser icon in  
or, while in the browser, it can  
F e  
the top left of the screen,  
F Q  
+ Hold  
be accessed by  
F
Q
2
3
4
5
6
Use to select Bookmarks  
e
F Q  
Use to select the relevant bookmark from the list,  
e
F A  
F Q  
Use to select the area to be edited/ renamed  
e
FQ  
to cancel required text and re-entre text using key pad.  
F B  
See "Text Entry" page 66  
7
8
to confirm edit  
F Q  
Use to scroll down until Save is shown in the Primary selection  
area  
e
F Q  
Deleting Bookmarks  
1
To access the Browser menu  
to select the browser icon in  
F e  
or, while in the browser, it can  
the top left of the screen,  
F Q  
+ Hold  
be accessed by  
F
Q
2
3
4
Use to select Bookmarks  
e
F Q  
Use to select the relevant bookmark from the list,  
e
F A  
Use to select Delete  
e
F Q  
60  
WAP Browser  
Deactivating the Browser  
The Browser can be deactivated as follows:  
When browsing on-line  
When browsing off-line  
to review cache off line.  
to return to Idle mode.  
F E  
F E  
Setting the Linger Time  
The phone will be automatically disconnected from the WAP server after a  
set period of non-interaction. This period is defined in seconds by the  
Linger Time setting.  
1
From Idle  
, select Browser > Browser Setting >  
Z Q  
Linger Time  
Z Q  
Use to select Bearer Type  
2
3
4
e
Z Q  
Z Q  
to remove the current linger time, then  
Use to select value  
e
+ Hold  
Z
B
re-enter the value required (in seconds)  
twice  
Z Q  
61  
 
Additional Features  
Additional Features  
Desktop Handsfree  
Desktop Handsfree enables you to hold a conversation without having to  
hold the phone to your ear.  
Note: Do NOT hold the phone to your ear in Handsfree mode.  
Swapping Between Handsfree and Handheld Calls  
During a Handheld call:  
1
2
F Q  
Use e to select H’free F Q  
During a Handsfree call:  
F Q twice to revert for Handheld operation  
Answering a Call Handsfree:  
To answer a call using Handsfree F+ Hold D  
Voice Memo  
You can record a two-way conversation during a call. If a different SIM is  
installed any voice memos will be lost.  
Caution: Security of a recorded message is your responsibility. You MUST  
ask for the other party’s consent before recording.  
Record a Voice Memo  
During a call:  
F Q  
Use to select Memo  
e
F Q  
A tone will sound when recording starts. When the recording stops a tone  
will sound.  
If you  
while recording a voice memo, recording will stop but no  
F Q  
tone will sound to either party.  
62  
 
Additional Features  
Play Back a Voice Memo  
From Idle  
Playback  
, select Applications > Voice Memo Play >  
F Q  
F Q  
To stop playing,  
twice  
F Q  
The Note Pad function is available during playback - see “Note Pad” page  
64.  
Volume Control During Playback  
While playing back:  
Use to adjust the volume of the voice memo  
e
Delete Memo  
From Idle  
, select Applications > Voice Memo Play >  
F Q  
twice  
Delete  
F Q  
DTMF Tones  
DTMF tones can be sent during conversation. These are often used to  
access voice mail, paging and computerised home banking. For example,  
you may need to input a number to remotely access voice mail messages. A  
phone number may be stored in the Phonebook with DTMF tones, allowing  
the number to be dialled upon recall and the DTMF number to be sent  
automatically.  
Send DTMF Tones During a Call  
Enter digits (  
to  
,
and  
)
0
9 #  
*
Pause Dial  
Using pauses allows you to send DTMF tones automatically.  
1
2
Enter phone number  
and hold until a P is displayed at the end of the phone  
number entered  
F
0
3
4
Enter DTMF digits after the pause, e.g. enter the number to access  
voice mail messages.  
F D  
When the call is successful DTMF tones will be sent after 3 seconds or  
to send the DTMF tones manually.  
F D  
If the DTMF tones are unsuccessful then the destination of your call may  
require that the length of the tones be increased.  
63  
 
Additional Features  
5
6
From Idle  
, select Personalise > DTMF Length  
F Q  
F
Q
Use to select Long  
e
F Q  
Note Pad  
During a call numbers can be entered which you may wish to dial when the  
call has ended.  
During a call:  
1
2
Enter phone number  
When the call has ended  
to call that number  
F D  
while the number is displayed – see  
To store in Phonebook,  
“Store a Number” page 14.  
F
A
Second Clock  
The Second Clock can either be set to auto-adjusting, whereby the second  
time will be automatically set from the code of the current network, or a  
specified time difference can be set manually.  
Setting Clock Display  
1
From Idle  
, select Applications >  
F Q  
Clock Function > Clock Format > Display  
Pattern  
F Q  
2
Use to select Second Time or Home Time  
e
F Q  
Setting Auto Adjustment  
If traveling to a country / region which has a roaming agreement with the  
users’ home network, the Second Clock will be automatically adjusted.  
However, for countries / regions which have several time zones in the same  
area manual adjustment is required.  
1
From Idle  
, select Applications > Clock Function >  
F Q  
Clock Set > Second > Auto Adjustment > Home area  
F
Q
2
Use to select your home area  
e
F Q  
64  
 
Additional Features  
Enabling Auto Adjustment  
From Idle  
, select Applications > Clock Function >  
F Q  
Clock Set > Second > Auto Adjustment > Auto Adjustment  
F Q  
Repeat to disable Auto Adjustment.  
Setting Manual Adjustment  
1
From Idle  
, select Applications > Clock Function >  
F Q  
Clock Set > Second > Time Difference  
F Q  
F Q  
2
Use to select the time difference required  
to set the  
e
value  
Setting Summer Time  
From Idle  
, select Applications > Clock Function >  
F Q  
Clock Set > Second > Summer Time  
F Q  
Once enabled, following the same procedure will disable Summer Time.  
Accessory Related Features  
When Auto Answer is switched on, and Personal Handsfree is connected, a  
call will be answered without pressing any keys. Any call waiting should be  
answered in the normal way.  
See the documentation provided with the relevant Accessory for  
operation details.  
65  
 
Text Entry  
Text Entry  
The phone provides a means for entering alphanumeric characters to enter  
details into the Phonebook, to create text and e-mail messages etc. This  
section details the characters that can be entered and the relevant keys to  
press.  
Text Mode  
Key  
T9®  
Normal  
(ABC)  
Greek  
(ÁÂÃ)  
Extended  
(AÄÅ)  
Numeric  
(0 - 9)  
Alternatives  
Punctuation  
abc  
+_  
+_  
+_  
0+P_  
0
1
2
3
4
5
6
7
8
9
*
#
.@/:;*#+-”,!¡?¿_()[]{}’&%\^~|<>=_£$¥¤§  
1
2
3
4
5
6
7
8
9
ABCabc  
ABÃ  
ÄÅÆ  
ÇÈÉ  
ÊËÌ  
ÍÎÏ  
ÐÑÓ  
ÔÕÖ  
×ØÙ  
AÄÅÆBCÇaäåæàbc  
DEÉFdeéèf  
GHIghiì  
def  
DEFdef  
ghi  
GHIghi  
jkl  
JKLjkl  
JKLjkl  
mno  
MNOmno  
MNÑOÖØmnñoöøò  
PQRSpqrsß  
TUÜVtuüùv  
WXYZwxyz  
Shift/Lock*  
Space  
pqrs  
PQRSpqrs  
TUVtuv  
tuv  
wxyz  
WXYZwxyz  
Shift/Lock*  
Space  
Shift/Lock*  
Space  
@
Space  
#
*
once to enter a single capital letter (subsequent characters  
F *  
will be lower case).  
twice acts as a keyboard CAPS LOCK  
F *  
function and subsequent characters will be uppercase.  
time, to return to lowercase character entry.  
a third  
F *  
Alternatively,  
+ Hold any of the numeric keys to enter the character  
F
menu, which allows the user to navigate around the menu ( ) until the  
g
required character is highlighted.  
to select.  
F Q  
to return to the message screen.  
F B  
66  
 
Text Entry  
T9® Text Input  
Using this mode of text entry dramatically reduces the number of key  
presses required:  
Press a key once for any letter you require on that key. The desired letter  
may not be displayed. Continue pressing other keys until the end of a word  
is reached; then check that the word has been typed correctly before  
continuing on to the next word.  
If the combination of letters typed has produced a word which is not the  
one you require, press  
repeatedly until the correct word is displayed.  
0
Continue to the next word.  
If the word you require is not in the internal dictionary (i.e. It is a proper  
noun or a rarely used word) then it should be entered using the Normal  
(
) mode.  
U
Other Text Modes  
To access any of the other text entry modes use  
to cycle through until  
A
the desired mode is displayed in the Information Area.  
When using Normal (  
), Greek (  
) or Extended (  
) text entry  
W
U
V
modes, each time a key is pressed in quick succession it will display the next  
character available on that key. Releasing the key, or pressing another key  
will enter the currently displayed character and the cursor will move to the  
next position.  
Editing Text  
Pressing will move you up or down one text line (or field in Phonebook).  
e
f
Pressing  
will move you left or right one character. When the cursor is  
moved over a character and another key pressed this will insert the new  
character immediately before the selected character. Pressing will  
B
delete the character to the left of the cursor or delete the current line  
when pressed and held.  
67  
 
Trouble Shooting  
Trouble Shooting  
Should any problem persist contact your dealer.  
Problem  
Cause  
Remedy  
Phone will not  
switch on  
Check that the battery is fully  
charged and correctly  
connected to the phone  
Extremely short The network you are  
battery life for a  
new battery  
using and the  
condition of the  
battery can affect  
battery life  
Short battery life The battery has worn  
Replace with a new fully  
charged battery  
for an old battery  
out  
The charging  
The battery is not  
Leave the phone charging the  
battery for a few minutes  
before the indicator is lit and  
attempting to switch it on  
indicator does attached to the phone  
not light, the  
battery level  
indicator does  
not appear and  
the phone cannot  
be switched on  
when charging  
or when the battery  
has been deeply  
discharged the phone  
will take a short time  
until the indicator  
lights  
The battery is not  
attached to the phone  
Battery fails to  
charge  
Ensure the battery is fitted to  
the phone prior to  
Battery has been  
connected to the  
phone after the Fast  
Travel Charger has  
been switched on  
commencing charging.  
68  
 
Trouble Shooting  
Unlock the phone  
The phone is  
locked  
Calls cannot be  
made  
Outgoing calls are Disable the outgoing call barring,  
barred  
or barred dial  
The phone is not  
registered to a  
network  
Move to a coverage area and  
operate your phone after it has  
registered with a network.  
Check your SIM supports Fixed  
Dial  
Calls cannot be  
made from Fixed  
Dial Store  
Check if the Fixed Dial is  
switched on  
Check the phone number is  
stored in the Fixed Dial  
The phone is not  
switched on  
Switch the phone on  
Calls cannot be  
received  
Incoming calls are Disable the incoming call barring  
barred  
The phone is not  
registered to a  
network  
Move to a coverage area and  
operate your phone after it has  
registered with a network.  
Emergency calls  
cannot be made  
You are not in a Check that the antenna symbol  
S
GSM coverage  
area  
is displayed - move to a coverage  
area and operate your phone  
when the antenna symbol is  
displayed  
Phone numbers  
cannot be  
recalled from  
Phonebook  
The phone is  
locked  
Unlock the phone  
Phone number has  
been restricted  
Switch off restriction  
69  
Trouble Shooting  
Important Error Messages  
These are some of the most important error messages which may be  
displayed:  
Area Not  
Allowed  
Roaming in the selected area is not allowed  
Network Not  
Allowed  
Roaming with the selected network is not allowed  
Security Failure  
The network has detected an authentication failure  
because your SIM is not registered with that network  
- contact your Service Provider  
SIM Blocked /  
Contact Service  
provider  
The SIM is blocked because one of the PIN/PIN2  
unblocking keys (PUK/PUK2) has been entered  
incorrectly ten times - contact your Service Provider  
SIM Error  
The phone has detected a problem with the SIM -  
switch the phone off and then back on; if the message  
is still displayed contact your Service Provider  
SIM Invalid  
The SIM has failed one or more of the SIM  
personalisation checks - contact your Service Provider  
Function  
Unavailable  
The selected feature is either not supported by the  
SIM or is not available with the current subscription -  
contact your Service Provider  
PIN2 Invalidated The PIN2 is blocked permanently because the wrong  
PUK2 has been entered ten times, services controlled  
by PIN2 cannot be used - contact your Service  
Provider  
Message Rejected A message has been received but the message store is  
Store Full  
full - to receive messages, delete some of the  
currently stored messages or set messages to Auto  
Delete  
Phone Number  
Too Long  
The edited or newly created Phonebook number is  
too long for the SIM  
(Max:20)  
Warning Store  
Full Continue?  
The message area is full. Your messages cannot be  
stored until some of the currently stored messages  
are deleted  
70  
 
Trouble Shooting  
Verification  
Failure  
On changing the phone lock code, verification of the  
new code is incorrect - retry changing the lock code  
with correct verification  
Incorrect Lock  
Code  
Disabling or enabling the lock code has failed due to  
incorrect entry of the lock code - re-enter lock code  
Incorrect PIN /  
PIN2 / PUK /  
PUK2  
The entered code is incorrect - re-enter code  
correctly  
Auto Redial List  
Full  
Redial list of unsuccessfully dialled numbers is full -  
switch the phone off and then on again  
71  
Glossary of Terms  
Glossary of Terms  
APN  
Cut  
Access Point Name. Directs the user to the gateway  
or the required service.  
Permanently removes selected text from short text  
message  
Copy  
Copies selected text from short text message without  
removing it from the original message  
CHAP  
Challenge Handshake Authentication Protocol. A  
security feature for the GPRS network.  
DTMF Tones  
Dual Tone Multi-Frequency tones allow you to  
communicate with computerised phone systems,  
voice mailboxes etc.  
EMS  
GPRS  
GSM  
Enhanced Message Service. Upgraded feature of Text  
Messages  
General Packet Radio Service. The Technology the  
phone uses.  
Global System for Mobile Communications. The name  
given to the advanced digital technology that your  
phone uses.  
Network  
Operator  
The organization responsible for operating a GSM  
network.  
PAP  
Password  
PIN  
Password Authentication Protocol. A security feature  
for the GPRS network.  
Used for the control of the Call Bar. Supplied by your  
Service Provider.  
Personal Identification Number used for SIM security.  
Supplied by your Service Provider. If the PIN is  
entered incorrectly 3 times, the PIN will be blocked.  
PIN2  
Personal Identification Number used for the control of  
Fixed Dial Store and Call Charge metering. Supplied  
by your Service Provider. If the PIN2 is entered  
incorrectly 3 times, the PIN2 will be blocked.  
72  
 
Glossary of Terms  
PIN/PIN2 Unblocking Key. Used to unblock the  
PUK/PUK2  
PIN/PIN2. Supplied by your Service Provider. If the  
PUK/PUK2 is entered incorrectly 10 times, the  
PUK/PUK2 will be blocked.  
Registration  
Roaming  
The act of locking on to a GSM network. This is  
usually performed automatically by your phone.  
The ability to use your phone on networks other than  
your Home network.  
Service  
Provider  
The organization responsible for providing access to  
the GSM network.  
SIM  
Subscriber Identity Module. A small smart-card which  
stores unique subscriber and user-entered information  
such as Phonebook and Short Messages. Supplied by  
your Service Provider.  
WAP  
Wireless Application Protocol. The communication  
standard which enables you to download resources  
from the Internet to your phone  
73  
Specifications  
Specifications  
Phone (Including Battery)*  
GSM900 Class 4  
GSM1800 Class 1  
Type  
Temperature Range  
Charging  
Storage  
+5ºC - +43ºC  
-20ºC - +60ºC  
Weight  
81g*  
Dimensions (mm)  
Height x Width x Depth  
109 x 45 x 20  
Supply Voltage  
3.7V DC, 690mAh Li-ion  
Standby Time (hrs)  
Talk Time (hrs)  
From 60 - 190  
From 1.5 - 6.5  
Charge Time (Phone off)  
Up to 85m (Fast Travel Charger)  
Up to 84m (Car Charger)  
Antenna  
SIM Type  
Internal  
3V only  
Phonebook Memory  
Animation Themes  
Voice Memo  
200 + SIM  
2
1 x 16 seconds  
User Composed Melody  
Download Melody  
Download Logo  
One  
Up to 5  
Up to 5  
Recordable Ringer  
2 x 10 seconds  
Games (  
)
Up to 2  
R
Backlight  
Ring tones  
Scheduler  
Alarms  
1
23 Fixed & Variable  
Up to 100 Entries  
4
Note: Charge time will be longer when the phone is turned on. Battery life  
is affected by the network being used and the condition of the battery. Talk  
and standby time will be dependant upon network conditions, SIM, back  
light usage and battery condition.  
74  
 
EU Warranty  
EU Warranty  
EU/EEA - Wide guarantee is applicable in the EU/EEA and Switzerland.  
Panasonic GSM European Service Guarantee Conditions  
Dear Customer,  
Thank you for buying this Panasonic digital cellular telephone. The Panasonic GSM European Service  
Guarantee only applies while traveling in countries other than where the product was purchased.  
Your local guarantee is applicable in all other cases. If your Panasonic GSM telephone requires service  
while abroad, please contact the local service company shown on this document.  
The Guarantee  
The applicable period of the European wide guarantee for GSM is generally 12 months for the main  
body and 3 months for the rechargeable battery. With respect to a product used in a country other  
than a country of purchase, notwithstanding what is stated in the conditions below, the customer will  
benefit, in that country of use, from these guarantee periods of, respectively, 12 and 3 months, if  
these conditions are more favorable to him than the local guarantee conditions applicable in such  
country of use.  
Conditions of Guarantee  
When requesting guarantee service the purchaser should present the warranty card together with  
proof of purchase, to an authorized service centre.  
The guarantee covers breakdowns due to manufacturing or design faults; it does not apply to other  
events such as accidental damage, however caused, wear and tear, negligence, adjustment,  
modification or repair not authorized by us.  
Your sole and exclusive remedy under this guarantee against us is the repair, or at our option the  
replacement, of the product, or any defective part or parts. No other remedy, including, but not  
limited to, incidental or consequential damage or loss of whatsoever nature shall be available to the  
purchaser.  
This is in addition to and does not in any way affect any statutory or other rights of consumer  
purchasers. This guarantee applies in countries shown on this document at the authorized service  
centres detailed for that country.  
UK  
Service Centres in England  
Tel. +44 (0) 8705 159159  
Panasonic Service Center Berlin  
SERKO GmbH  
Schwedter Straße 34a  
10435 Berlin  
Tel. +49 (0)30/ 44 30 3221  
Panasonic Service Center Berlin  
RUESS SYSTEMS  
IRL  
Service Centres in Ireland  
Tel: +353 (0) 1 2898333  
Thrasoltstraße 11  
10585 Berlin  
Tel. +49 (0)30/ 342 2013  
Panasonic Service Center Rostock  
warnow electronic service gmbh  
An der Jägerbäk 2  
D
Panasonic Service Center Dresden  
18069 Rostock  
SERKO GmbH  
Tel. +49 (0)381/ 82 016  
Großenhainer Straße 163  
01129 Dresden  
Tel. +49 (0)351/ 85 88 477  
Panasonic Service Center Cottbus  
Petsch Kundendienst GmbH  
Am Seegraben 21  
Panasonic Service Center Hamburg  
ELVICE Service GmbH  
Spaldingstraße 74  
20097 Hamburg  
Tel. +49 (0)40/ 23 08 07  
03058 Gross-Gaglow  
Panasonic Service Center Rendsburg  
FERNSEH-DIENST B&W Service GmbH  
Kieler Straße 41  
Tel. +49 (0)355/ 58 36 36  
Panasonic Service Center Leipzig  
KES Keilitz-Electronic-Service GmbH  
Föpplstraße 19  
24678 Rendsburg  
Tel. +49 (0)4331/ 14 11-0  
04347 Leipzig  
Panasonic Service Center Bremen  
COM Elektronik Service GmbH  
Rübekamp 50  
Tel. +49 (0)341/ 244 33 33  
Panasonic Service Center ChemnitF  
WPS Rundfunk- u. Fernsehservice GmbH  
Fietenstraße 16  
28219 Bremen  
Tel. +49 (0)421/ 691 80 69  
09130 ChemnitF  
Tel. +49 (0)371/ 40 10 359  
75  
 
EU Warranty  
Panasonic Service Center Hannover  
COM Elektronik Service GmbH  
Vahrenwalder Straße 311  
30179 Hannover  
A
Service-Fentren in Österreich  
Funk Fuchs GmbH & CoKg Unterhart 90  
4642 Sattledt  
Tel. +49 (0)511/ 37 27 91  
Panasonic Service Center Magdeburg  
SERKO GmbH  
Tel. +43 7244 733  
Funktechnik Seissl  
Dorf 79  
6330 Schwoich  
Tel. +43 5372 8217  
Electro Oberndorfer  
Linzer Straße 2-4  
4840 Vöcklabruck  
Tel. +43 6772 72889  
Ebendorfer Chaussee 47  
39128 Magdeburg  
Tel. +49 (0)391/ 289 90 69  
Panasonic Service Center Düsseldorf  
VTH GmbH  
Kölner Straße 147  
40227 Düsseldorf  
Tel. +49 (0)211/ 77 90 25  
Panasonic Austria Handelsges.mbH Laxenburger  
Panasonic Service Center Essen  
Bernd van Bevern GmbH  
Heinrich-Held-Straße 16  
45133 Essen  
Straße 252  
1232 Wien  
Tel. +43 222/61080  
Tel. +49 (0)201/ 84 20 220  
FR  
Panasonic Service Center Osnabrück  
Petsch Kundendienst GmbH  
Pagenstecherstraße 75  
CETELEC  
FI de la Delorme  
5 Avenue Paul héroult  
13015 MARSEILLE  
Tél. : 04 96 15 77 77  
Tél. : 04 91 58 07 55  
49090 Osnabrück  
Tel. +49 (0) 541/ 68 038  
Panasonic Service Center Wiesbaden  
J. Hemmerling - VAD GmbH  
Ostring 7  
CORDON Electronique  
BP 460  
65205 Wiesbaden  
Tel. +49 (0)6122/ 90 91 10  
FI Taden  
Panasonic Service Center Mannheim  
N. Schaaf  
22107 DINAN CEDEX  
Tél. : 02.96.85.82.20  
Fax : 02.96.85.82.21  
Reichenbachstraße 21-23  
68309 Mannheim  
EASY REPAIR  
Tel. +49 (0)621/ 72 787-0  
26 rue des Cosmonautes  
31400 Toulouse  
Panasonic Service Center Stuttgart  
Hans Beck  
Friedrich-List-Straße 38  
70771 Leinfelden-Echterdingen  
Tel. +49 (0) 711/ 94 701-0  
Tél. : 05.62.71.48.14  
Fax : 05.62.71.48.15  
EASY REPAIR  
22 boulevard des Brotteaux  
69006 Lyon  
Panasonic Service Center Reutlingen  
Herbert Geissler  
Tél. : 04.72.83.02.02  
Fax : 04.78.52.40.38  
Lichtensteinstraße 75  
72770 Reutlingen  
ELECTRONIQUE SERVICE  
Avenue Figuières  
FAC Font de la Banquière  
34970 LATTES  
Tel. +49 (0)7072 / 92 96-0  
Panasonic Service Center München  
G.Berghofer & W.Kaller GmbH  
Helene-Wessel-Bogen 7  
Tél. : 04.67.15.96.30  
Fax : 04.67.20.04.72  
80939 München  
Tel. +49 (0)89/ 318 907-0  
GENERAL ELECTRONIQUE  
16 rue Joseph Cugnot  
F.I. Bracheux  
Panasonic Service Center Augsburg  
Klaus Bienek  
Affinger Straße 4  
60000 BEAUVAIS  
Tél. : 03.44.89.79.00  
Fax : 03.44.05.16.96  
86167 Augsburg  
Tel. +49 (0)821/ 70 70 75  
Panasonic Service Center Nürnberg  
Herbert Geissler GmbH  
Friedrich-Ebert-Straße 21  
90537 Feucht  
Négoce Technique etMaintenance  
40 boulevard Bessières  
75017 PARIS  
Tél. : 01.44.85.21.66  
Fax : 01.42.29.60.05  
Tel. +49 (0)9128/ 70 67-0  
Panasonic Service Center Eisenach  
Blitz Electro-Electronic-GmbH  
Bahnhofstraße 17  
S.B.E.  
F.I. de la Liane  
BP 9  
99817 Eisenach  
62360 SAINT LEONARD  
Tél. : 03.21.10.10.21  
Fax : 03.21.80.20.10  
Tel. +49 (0)3691/ 29 29 42 8  
76  
EU Warranty  
PLAY-SHOP SERVICE Keskuskatu 3  
NL  
00100 Helsinki  
Puh. +358 09 27053626  
Service-centra in  
Nederlands  
MEGAFIX KY  
Louhenkatu 9  
Panasonic-Centre Nederland  
(Servicom bv)  
74100 Iisalmi  
Puh. +358 017 14631  
P.O Box 16280  
2500 BG  
T: MI.M.HAAPOJA  
Miilukatu 7  
Den-Haag  
Nederland  
40320 Jyväskylä  
Tel. +31 703314314  
Puh. +358 014 677121  
Fonweg 60  
OUTOKUMMUN PUHELIN Pohjoisahonkatu 9  
83500 Outokumpu  
2516 BM  
Den-Haag  
Puh. +358 013 562211  
Nederland  
SETELE OY  
Tel. +31 703314314  
Rengastie 31  
60100 Seinäjoki  
Puh. +358 06 4148344  
I
TURUN J-MARKKINAT OY Tuureporinkatu 6  
20100 Turku  
Puh. + 358 02 2332685  
Per I Centri Assisitenza in Italia  
Servizio Clienti  
Tel. +39 02/ 67072556  
N
E
Servicesenter I Norge  
Norsk Elektronikksenter  
Fetveien 1  
Panasonic España, S.A.  
Servicio de Atención a Usuarios:  
Tel: 902 15 30 60  
2007 Kjeller  
Tlf: +47 63 80 45 00  
Panasonic Norge AS  
Østre Aker vei 22  
0508 Oslo  
DK  
For nærmeste servicecenter ring Panasonic  
Danmark  
Tlf: +47 22 91 68 00  
Tel. +45 43 20 08 50  
GR  
ÊÝíôñá ôå÷íéêÞò õðïóôÞñéîçò  
S
INTERTECH S.A.  
Firmor I Sverige  
International Technologies  
Áöñïäßôçò 26, 167 77 Åëëçíéêü  
Tá÷. Èõñ.: 738 21, 167 10 ÅËËÇÍÉÊÏ  
Ôçë. ÊÝíôñï: (01) 9692.300  
Komrep  
Rosenlundsgatan 4  
411 20 Göteborg  
Tel. +46 031-173354  
ÕðïêáôÜóôçìá Âüñåéáò ÅëëÜäáò:  
Ê. ÊáñáìáíëÞ 11, 54638 ÈÅÓÓÁËÏÍÉÊÇ  
Ôçë. ÊÝíôñï: (031) 245.840-3  
Signalstyrkan  
Kungsholmstorg 4  
104 22 Stockholm  
Tel. +46 08-6542500  
P
CR service  
Industribyn 3  
Centros de Assistência em Portugal  
232 37 Malmö  
Tel. +46 040-430030  
PAPELACO, S.A.  
Vale Paraiso - Ferreiras  
8200 ALBUFEIRA  
ALGARVE  
SF  
Huoltokeskukset Suomessa:  
Tel. +351 89 589960  
PAPELACO, S.A.  
Largo de Santos, 9  
1200 LISBOA  
KAUKOMARKKINAT OY  
PANASONIC-HUOLLOT Kutojantie 4  
02630 Espoo  
Tel. +351 1 3970539  
Puh. +358 09 521 5151 Huolto  
Puh. +358 09 521 5155 Varaosat Ja Tarvikkeet  
PAPELACO, S.A.  
Largo do Tribunal, Lote 11  
2400 LEIRIA  
SETELE OY  
Vanha Viertotie 7  
00300 Helsinki  
Tel. +351 44 28071  
Puh. +358 09 549100  
77  
EU Warranty  
PAPELACO, S.A.  
L
Rua Cidade de Santos, 31R/C  
9000 FUNCHAL  
Centres de service après-vente au Luxembourg  
NOUVELLE CENTRAL RADIO  
Rue des Jones 15  
MADEIRA  
Tel. +351 91 231523  
PAPELACO, S.A.  
Rua do Outeiro,  
Lote 25 - Gemunde  
4470 MAIA  
L - 1818 Howald  
Luxembourg - Grand Duché  
Tel. +32 40 40 78  
PORTO  
Tel. +351 2 944 0354/9  
CH  
Jonh Lay Electronics AG  
PAPELACO, S.A.  
Rua Major Leopoldo da Silva,  
Lote 3  
Littauerboden  
6014 Littau  
3500 VISEU  
Phone: +41 41 259 9090 Fax: +41 41 252  
0202  
Tel. +351 32 424771  
B
TR  
Centres de service après-vente en Belgique  
TEKOFAKS ISTANBUL CENTRE OFFICE  
KAÐITHANE CADDESI SEVÝLEN SOKAK NO. 58  
80340 ÇAÐLAYAN-ISTANBUL  
Tel: 90-212-220 60 70 / 14 Lines  
Fax: 90-212-220-60 94  
BROOTHAERS  
Hoevelei 167  
2630 AARTSELAAR  
Tel. +32 03/887 06 24  
HENROTTE  
ANKARA BRANCH OFFICE  
Rue du Campinaire 154  
6240 FARCIENNES  
Tel. +32 071/39 62 90  
GÜVEN MAH.FARABI SOKAK NO: 38/6 06690  
KAVAKLIDERE- ANKARA  
Tel: 90-312-467 30 94/2 Lines pbx  
Fax: 90-312 467 85 38  
ÝSMÝR BRANCH OFFICE  
PIXEL VIDEOTECH  
Rue St Remy 7  
4000 LIEGE  
CUMHURÝYET BULVARI NO:330 K.:6 D.:608 SEVÝL  
ÝÞ MERKEFÝ 35520 ALSANCAK-ÝFMÝR  
Tel: 90-232-464 29 01 pbx  
Tel. +32 041/23 46 26  
DELTA ELECTRONICS  
Rue P.d’Alouette 39  
5100 NANINNE  
Fax: 90-232-422 67 44  
BURSA BRANCH OFFICE  
ÞEHREKÜSTÜ MAHLLESÝ DURAK CADDESÝ NO.:7  
BURSA  
Tel: 90-224-225 10 46 pbx  
Fax: 90-224-223 81 03  
Tel. +32 081/40 21 67  
ELEKSERVICE FEYS Houthulstseweg 56  
8920 POELKAPELLE  
Tel. + 32 057/48 96 37  
AVS WAASLAND Lavendelstraat 113  
9100 ST NIKLAAS  
Tel. +32 03/777 99 64  
ADANA BRANCH OFFICE  
REÞATBEY MAH.FUFULÝ CAD.GÜLEK SÝTESÝ A  
BLOK NO: 75b 01120 ADANA  
Tel: 90-322-458 39 52 pbx  
A.V.T.C SA  
Fax: 90-322-453 21 32  
Kleine Winkellaan 54  
TRABFON BRANCH OFFICE  
MARAÞ CAD.MARAÞ APT.NO:51 D.:2 61200  
TRABFON  
Tel: 90-462-321 33 08  
Fax: 90-462-326 37 78  
ANTALYA BRANCH OFFICE  
ALTINDAÐ MAH. 146 SOKAK ÖFKOÇ  
APT.NO:9/1-2A ANTALYA  
Tel: 90-242-243 23 70 / 3 Lines  
Fax: 90-242-243 23 72  
DÝYARBAKIR BRANCH OFFICE  
LÝSE CADDESÝ GÖKALP APT.NO: 18/A  
DÝYARBAKIR  
Tel: 90-412-228 73 00  
Fax: 90-412-223 59 00  
1853 STROMBEEK-BEVER Tel. + 32 02/267 40  
19  
RADIO RESEARCH  
Rue des Carmélites 123  
1180 BRUXELLES  
Tel. +32 02/345 68 56  
VIDEO TECHNICAL SERVICE  
Av. du Roi Albert 207  
1080 BRUXELLES  
Tel. +32 02/465 33 10  
SERVICE CENTER Kapellestraat 95  
9800 DEINFE  
Tel. +32 09/386 67 67  
TOP SERVICE  
Westerloseweg 10  
2440 GEEL  
Tel. +32 014/54 67 24  
TELECTRO SC  
Quai des Ardennes 50  
4020 Liège  
Tel. +32 041/43 29 04  
78  
EU Warranty  
EU/EEA - Wide Guarantee: Conditions applicable in any country other than the country of  
original purchase.  
A
When the purchaser finds the appliance to be defective, he should promptly contact the proper  
sales company or national distributor in the EU/EEA country where this guarantee is claimed, as  
indicated in the “Product Service Guide” or the nearest authorized dealer together with this  
guarantee and proof of date of purchase.  
The purchaser will then be informed whether:  
(I) the sales company or national distributor will handle the repair service: or  
(ii) the sales company or national distributor will arrange for trans-shipment of the appliance to  
the EU/EEA country where the appliance was originally marketed; or  
(iii) the purchaser may himself send the appliance to the sales company or national distributor in  
the EU/EEA country where the appliance was originally marketed.  
B
C
If the appliance is a product model which is normally supplied by the sales company or national  
distributor in the country where it is used by the purchaser, then the appliance, together with  
this guarantee card and proof of date of purchase, should be returned at the purchaser’s risk and  
expense to such sales company or distributor, which will handle the repair service. In some  
countries, the affiliated sales company or national distributor will designate dealers or certain  
service centres to execute the repairs involved.  
If the appliance is a product model which is not normally supplied in the country where used, or  
if the appliance’s internal or external product characteristics are different from those of the  
equivalent model in the country where used, the sales company or national distributor may be  
able to have the guarantee repair service executed by obtaining spare parts from the country  
where the appliance was originally marketed, or it may be necessary to have the guarantee  
repair service executed the sales company or national distributor in the country where the  
appliance was originally marketed.  
In either case, the purchaser must furnish this guarantee card and proof of date of purchase. Any  
necessary transportation, both of the appliance and of any spare parts, will be at the purchaser’s  
risk and expense, and there may be a consequent delay in the repair service.  
D
E
F
Where the consumer sends the appliance for repair to the sales company or national distributor  
in the country of use of the appliance, the service will be provided on the same local terms and  
conditions (including the period of guarantee coverage) as prevail for the same model appliance  
in the country of use, and not the country of initial sale in the EU/EEA. Where the consumer  
sends the appliance for repair to the sales company or national distributor in the EU/EEA  
country where the appliance was originally marketed, the repair service will be provided on the  
local terms and conditions prevailing in the country of initial sale in the EU/EEA.  
Some product models require adjustment or adaptation for proper performance and safe use in  
different EU/EEA countries, in accordance with local voltage requirements and safety or other  
technical standards imposed or recommended by applicable regulations. For certain product  
models, the cost of such adjustment or adaptation may be substantial and it may be difficult to  
satisfy local voltage requirements and safety or other technical standards. It is strongly  
recommended that the purchaser investigates these local technical and safety factors before  
using the appliance in another EU/EEA country.  
This guarantee shall not cover the cost of any adjustments or adaptations to meet local voltage  
requirements and safety or other technical standards. The sales company or national distributor  
may be in a position to make the necessary adjustments or adaptations to certain product  
models at the cost of the purchaser. However, for technical reasons it is not possible to adjust  
or adapt all product models to comply with local voltage requirements and safety or other  
technical standards. Moreover, where adaptations or adjustments are carried out the  
performance of the appliance may be affected.  
G
If in the opinion of the sales company or national distributor in the country where the appliance  
is used the purchaser has the necessary adjustments or adaptations to local voltage requirements  
and technical or safety standards properly made, any subsequent guarantee repair service will be  
provided as above indicated, provided the purchaser discloses the nature of the adjustment or  
adaptation if relevant to the repair. (It is recommended that the purchaser should not send  
adapted or adjusted equipment for repair to the sales company or national distributor in the  
country where the appliance was originally marketed if the repair relates in any way to the  
adaptation or adjustment).  
H
This guarantee shall only be valid in territories subject to the laws of the European Union and  
the EEA.  
Please keep this guarantee with your receipt.  
79  
Personal Settings  
Personal Settings  
Use the table below to record your GSM/GPRS WAP settings.  
Item  
Provisioning  
Information Setting  
No 1  
Provisioning  
Information Setting  
No 2  
Name  
Home URL  
Gateway IP  
Port Number  
Non secure - 9201  
Secure - 9203  
(Delete One)  
Service Choice  
Circuit Switched (GSM)  
Digital Dial #  
Analogue Dial #  
Circuit Type  
PPP ID  
PPP Password  
Linger time  
Packet Switched (GPRS)  
Access Point Name  
User ID  
User Password  
Authentication  
Normal/Encrypted/  
None  
(PAP) (Chap)  
80  
 
Notes  
Notes  
81  
 
Menu Structure  
Menu Structure  
82  
 
Licencing  
Licencing  
In-Fusio  
In-Fusio have developed specific software called ExEn for the purpose of  
downloading and playing games from mobile handset  
OpenWave  
OvenWave is a pioneer in the mobile data transfer industry, supplying voice  
and data revenue to the mobile communications sector.  
Tegic  
T9® is a trademark of Tegic Communications Inc.T9® Text Input is  
licensed under one or more of the following: U.S. Pat. Nos. 5,818,437,  
5,953,541, 5,187,480, 5,945,928, and 6,011,554; Canadian Pat. No.  
1,331,057; United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat.  
No.HK0940329; Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0  
842 463 (96927260.8) DE/DK, FI, FR, IT, NL, PT.ES, SE, GB; and additional  
patents are pending worldwide.  
0168  
CP8 Patent  
© Matsushita Mobile Communications Development of Europe Ltd 2002  
Information in this document is subject to change without notice. No part  
of these instructions may be reproduced or transmitted in any form or by  
any means without obtaining express permission from Matsushita Mobile  
Communications Development of Europe Ltd  
83  
 
The Serial Number can be found on the outside of the phone under the  
battery. For your convenience we recommend that you note the  
following details as a record of your purchase.  
Part Number  
Serial Number  
Dealer Name  
Purchase Date  
GD67DPK11A  
Printed in Czech Republic  
www.panasonicmobile.com  
Matsushita Communication Industrial Czech s.r.o  
Pardubice, Czech Republic  

Sony FD TRINITRON VEGA KV 32FV16 User Manual
Sony Ericsson T290i User Manual
Seagate Pipeline HD 100529372 User Manual
Seagate CONSTELLATION ES2 SERIAL ATA ST33000652NS User Manual
Samsung NP300E4CA07JM User Manual
Pyramid Technologies TimeTrax Sync Wood Series User Manual
Philips CD 335 User Manual
Panasonic X60 User Manual
Nokia C5 00 User Manual
Honeywell Thermostat TH8321U1006 User Manual