Battery Charger
•
Treo™ 750 smartphone batteries
Introduction
The Palm® Battery Charger is a convenient,
pocket-sized traveler’s charger for various
Palm® smartphone batteries, including the
following:
NOTE For a complete list of compatible
smartphone batteries, go to
Working with the AC charger that came
with your smartphone or another power
supply approved by Palm, the Battery
Charger ensures that your smartphone
battery is ready to use whenever you need
it.
•
•
•
•
•
Treo™ 650 smartphone batteries
Treo™ 680 smartphone batteries
Treo™ 700p smartphone batteries
Treo™ 700w smartphone batteries
Treo™ 700wx smartphone batteries
I N T R O D U C T I O N
1
4
Connect the AC charger that came with
your smartphone to the Battery Charger
so that the white triangles are aligned.
Using your Battery
Charger
NOTE Connecting other power supplies to
the Battery Charger may damage or
destroy your smartphone battery. Use only
power supplies that are approved by Palm.
For more information, go to
To charge a smartphone battery with your
Battery Charger, do the following:
1
2
With your thumb and index finger on
each side of the lid, open the Battery
Charger.
5
Connect the AC charger to a wall outlet.
Insert a smartphone battery into the
Battery Charger so that the battery
contacts align with the contacts in the
Battery Charger.
6
Check the indicator light to confirm that
the smartphone battery is being
charged.
3
Close the lid until it lightly snaps shut.
Solid red indicates that your
smartphone battery is being charged.
U S I N G Y O U R B A T T E R Y C H A R G E R
2
Solid green indicates that your
smartphone battery is charged.
Power Charger, or another power supply
approved by Palm.
Flashing yellow indicates that the
battery being charged has become too
hot or too cold to safely charge. Move
the Battery Charger to a location that is
at room temperature.
CAUTION Do not use power supplies that
are not approved by Palm. They could
damage the Battery Charger or the battery
being charged and may cause personal
injury.
Solid yellow indicates a damaged
battery or a power-supply error.
•
•
Don’t use the Battery Charger in areas
where sparks could pose a hazard.
CAUTION If the indicator light is solid
yellow, immediately disconnect your
Battery Charger. Be sure you are using a
functional Palm smartphone battery as well
as a functional Palm power supply.
Don’t let the Battery Charger’s metal
contacts or electrical socket come in
contact with metal objects.
•
Keep the metal contacts and the
electrical socket on the Battery Charger
clean and free from debris that could
obstruct charging or could cause a short
circuit.
NOTE For additional troubleshooting
information for your Battery Charger, go to
•
•
Don’t expose the Battery Charger or
your spare batteries to rain or other
liquids.
Caring for your
Battery Charger
Avoid using the Battery Charger at high
temperatures (above 60°C/134°F), such
as in a hot vehicle or in direct sunlight.
General information
•
Use only the AC charger that came with
your smartphone, a Palm® Vehicle
C A R I N G F O R Y O U R B A T T E R Y C H A R G E R
3
Battery safety and disposal information
CAUTION Burning a battery may cause an
explosion and personal injury.
•
Keep the metal contacts on the battery
clean.
•
Be sure to dispose of your battery in an
environmentally responsible and legal
way.
•
Don’t attempt to disassemble or
short-circuit the battery.
CAUTION To avoid being burned, don’t
handle a damaged or leaking lithium-ion
(Li-ion) battery.
NOTE In some areas, the disposal of
batteries in household or business trash
may be prohibited. For battery disposal
environment.
•
Never dispose of a battery by
incineration.
C A R I N G F O R Y O U R B A T T E R Y C H A R G E R
4
written approval may void the user’s authority to operate this
equipment.
Important safety and
legal information
Responsible party:
Palm, Inc.
950 W. Maude Avenue
Sunnyvale, CA 94085-2801
United States of America
(408) 617-7000
FCC statement
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Smartphone Cradle
Tested to Comply
With FCC Standard
FOR HOME OR OFFICE USE
Canadian ICES-003 statement
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
•
•
•
Reorient or relocate the receiving antenna.
Cet appareil numérique de la classe B respecte toutes les exigences
du Réglement sur le matériel brouilleur du Canada.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded I/O cables is required when connecting this
equipment to any and all optional peripheral or host devices. Failure
to do so may violate FCC rules.
CE compliance statement
This product was tested by Palm, Inc. and found to comply with all
the requirements of the EMC Directive 89/336/EEC as amended.
IMPORTANT Changes or modifications not covered in this manual
must be approved in writing by the manufacturer’s Regulatory
Engineering Department. Changes or modifications made without
I M P O R T A N T S A F E T Y A N D L E G A L I N F O R M A T I O N
5
cradle, or connecting it to any other device. You can do this in many
ways, including the following:
Static Electricity, ESD, and Your Palm Device
Electrostatic discharge (ESD) can cause damage to electronic devices
if discharged into the device, so you should take steps to avoid such
an occurrence.
•
Ground yourself when you're holding your device by
simultaneously touching a metal surface that is at earth ground.
For example, if your computer has a metal case and is plugged
into a standard three-prong grounded outlet, touching the case
should discharge the ESD on your body.
Description of ESD Static electricity is an electrical charge caused by
the buildup of excess electrons on the surface of a material. To most
people, static electricity and ESD are nothing more than annoyances.
For example, after walking over a carpet while scuffing your feet,
building up electrons on your body, you may get a shock—the
discharge event—when you touch a metal doorknob. This little shock
discharges the built-up static electricity.
•
•
Increase the relative humidity of your environment.
Install ESD-specific prevention items, such as grounding mats.
Conditions that enhance ESD occurrences Conditions that can
contribute to the buildup of static electricity in the environment
include the following:
ESD-susceptible equipment Even a small amount of ESD can harm
circuitry, so when working with electronic devices, take measures to
help protect your electronic devices, including your Palm® device,
from ESD harm. While Palm has built protections against ESD into its
products, ESD unfortunately exists and, unless neutralized, could
build up to levels that could harm your equipment. Any electronic
device that contains an external entry point for plugging in anything
from cables to docking stations is susceptible to entry of ESD.
Devices that you carry with you, such as your Palm device, build up
ESD in a unique way because the static electricity that may have built
up on your body is automatically passed to the device. Then, when
the device is connected to another device such as a docking station, a
discharge event can occur.
•
•
Low relative humidity.
Material type. (The type of material gathering the charge. For
example, synthetics are more prone to static buildup than natural
fibers like cotton.
•
The rapidity with which you touch, connect, or disconnect
electronic devices.
While you should always take appropriate precautions to discharge
static electricity, if you are in an environment where you notice ESD
events, you may want to take extra precautions to protect your
electronic equipment against ESD.
Precautions against ESD Make sure to discharge any built-up static
electricity from yourself and your electronic devices before touching
an electronic device or connecting one device to another. The
recommendation from Palm is that you take this precaution before
connecting your Palm device to your computer, placing a device in a
PN: 185-10441-00
I M P O R T A N T S A F E T Y A N D L E G A L I N F O R M A T I O N
6
|