7. PROG AND FOLDER CONNERSION BUTTON
In STOP mode, you can program several tracks (20 tracks max):
- Press the STOP button to enter in the stop mode
- Press the PROG button to enter in the program mode
- Use the skip track buttons to choose the track you want to listen then press the PROG button to
enter your choice.
- Use one more time the skip track buttons to choose the track you want to listen then press the
PROG button to enter your choice.
- Repeat the operation to select all the track you want to listen
- Press the play / pause button to start the playback
8. OUT BUTTON (LOOP BUTTON)
When you press this button, you set the end point of the seamless loop and you start the loop. To
finish the loop, press again this button.
9. RELOOP BUTTON(LOOP SYSTEM)
This button is used to start the last saved loop. To finish the loop, press the reloop button.
10. SKIP I<< BUTTON
This button selects the last track to be player.
11. PITCH BEND +/- BUTTON
The CUE function allows the CD to be played from the memorized point any numbers of times,
with the unit in pause mode. Press the CUE button to set up the memorized CUE point and then
the CUE button blinks.
12. +10 BUTTON
Use this button to jump of 10 tracks in one press.
13. PLAY / PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from
pause to play.
14. SKIP >>I BUTTON
Uses the button select the next track to be player.
15. PITCH CONTROL
Use this fader to increase or decrease the speed of the track.
16. PITCH BEND +/- BUTTON
When each to two CD player is playing the pitch bend function allows the button beat when mixing
from one song to anther.
17. PITCH BUTTON
If you push this button, the adjustement of the pitch potentiometer is available.
18. DISPLAY
This LCD Display indicates track Numbers,Time,Remain,pitch,Single,Continue and Time Bar
19. DISC-TRAY
To enter the disc, please refer to the explanations under 6.2 CD-tray.
20. OPEN/CLOSE BUTTON
The Disc is placed on this tray pressing the Disc tray open/close buttons will open or close the tray
21. SEARCH BUTTON
Press this button to switch the single and continues play mode.The select mode is indicated on the
LCD.In SINGLE mode, after each track,the unit pauses the beginning of the next track in
continues mode,the unit plays all tracks.
22. USB PORT
Support USB playing and you may also connect the computer with the USB cable but only when
enter into USB work mode.
3
23. CD/USB
To enter into the CD or USB work mode by this key conversion.
24.
3 IN 1 CARD SLOT
Slot for inserting 3 IN 1 card. The contacts of the card must point downwards. The unit cannot
read cards with a capacity of more than 4GB. The unit is not compatible to SDHC cards and only
supports the MP3 format.
Connection:
25. LINE OUT 1-2
The audio for each CD player is output from these jacks. Connect to the line input of the mixer.
26. AC CORD
Connect the power cord into an AC wall outlet with the proper AC voltage
27. CONNECTION PORT
The 8 PIN Termination permits the connection the control unit to the main unit
4
WARRANTY CONDITIONS
PLYE PRO equipment is covered by a 1-year warranty on parts and labour except for faders (90
days).
The following rules apply from the day the equipment leaves the factory:
The date on the invoice is considered to be the date the warranty begins.
Only companies approved by PLYE PRO are allowed to work on the equipment. Warranty becomes
void when other service technicians open the equipment.
During warranty period, defective equipment must be sent by pre-paid mail in the original box.
PLYE PRO will return the goods by pre-paid mail during the first year of warranty; thereafter the
mailing cost is to be paid by the recipient.
Potentiometers have a limited lifetime and are not covered by the manufacturer for more than normal
use.
For all service enquiries, refer to your local distributor, as he is best able to help you.
SPECIFICATIONS:
Anti-Shock Buffer Memory:
Range of adjustments:
Power supply:
40 seconds
+/- 24%
~115/230V, 60/50Hz
Player : 482x90x255mm
Controller : 482x132x80mm
Dimensions :
5
|