Nokia TransACT N91 8GB User Manual

Contents

Repeat play ...................................................................19

Modify sound .......................................................................19

Equalizer ........................................................................19

Audio settings ..............................................................19

Go to music shop.........................................................20

Transfer music......................................................................20

Transfer from PC..........................................................21

Music transfer..............................................................21

Playlists..................................................................................22

Create a playlist...........................................................22

Add songs to a playlist...............................................23

Reorder songs...............................................................23

Remove songs from a playlist..................................23

Add items from views to a playlist.........................23

Playlist details ..............................................................24

Automatic playlists.....................................................24

Available options.................................................................24

Options only in Now Playing view..........................25

Rename items.......................................................................25

View and edit song details...............................................25

Library details.......................................................................26

Set a song as a ringing tone............................................26

For your safety...........................................9

Your Nokia N91 8GB.............................. 12

Hard drive..............................................................................12

View memory consumption..............................................12

Memory low—free memory...............................................12

Essential indicators.............................................................13

Nokia support on the Web................................................14

Help.........................................................................................14

Tutorial ...................................................................................14

Clock........................................................................................15

Clock settings................................................................15

World clock....................................................................15

Volume and loudspeaker control ....................................16

File manager .........................................................................16

Keypad lock (keyguard)......................................................17

Music player............................................ 18

Play a song ............................................................................18

Controls..................................................................................18

Indicators...............................................................................19

Play modes ............................................................................19

Shuffle play ...................................................................19

Visualization......................................................................... 26 Add ringing tones for contacts .......................................37

Change album art............................................................... 26 Create contact groups.......................................................37

About encoded audio.........................................................26

Bitrates........................................................................... 27

Variable bitrate............................................................ 27

Remove members from a group..............................37

Messaging.................................................38

Write text..............................................................................39

Traditional text input.................................................39

Predictive text input—Predictive text....................39

Copy text to clipboard ...............................................41

Personalize your device...........................28

Profiles—Set tones.............................................................. 28

Offline profile............................................................... 28

Change the look of your device...................................... 29 Write and send messages.................................................41

Active standby mode.......................................................... 29

Receive MMS and e-mail settings .........................43

Inbox—receive messages...................................................44

Multimedia messages.................................................44

Data and settings........................................................44

Web service messages................................................45

My folders .............................................................................45

Mailbox..................................................................................45

Open the mailbox........................................................45

Retrieve e-mail messages.........................................46

Retrieve e-mail messages automatically..............47

Delete e-mail messages.............................................47

Disconnect from the mailbox ..................................47

Outbox—messages waiting to be sent..........................48

View messages on a SIM card.........................................48

Messaging settings.............................................................48

Text messages...............................................................49

Make calls ................................................31

Voice calls .............................................................................31

Make a conference call .............................................31

Speed dial a phone number...................................... 32

Voice dialling................................................................ 32

Answer or reject a call....................................................... 33

Call waiting (network service)................................. 33

Options during a voice call....................................... 34

Contacts (Phonebook).............................35

Save names and numbers................................................. 35

Default numbers and addresses.............................. 36

SIM directory and SIM services ...................................... 36

Copy contacts ......................................................................36

Multimedia messages.................................................50

E-mail..............................................................................51

Web service messages................................................52

Cell broadcast...............................................................53

Other settings...............................................................53

Listen to the radio.......................................................63

View visual content ....................................................63

Saved stations..............................................................64

Settings ..........................................................................64

My own.....................................................65

Media applications ................................. 54

IM—instant messaging (chat)..........................................65

Receive IM settings.....................................................65

Connect to an IM server............................................65

Modify your IM settings............................................65

Search for IM groups and users ..............................66

Join IM groups..............................................................66

Chat.................................................................................66

View and start conversations...................................67

IM contacts...................................................................67

Manage IM groups......................................................68

IM server settings........................................................69

Push to talk (network service).........................................69

Define a push-to-talk access point........................70

Push-to-talk settings .................................................70

Exit push to talk...........................................................71

Make a one-to-one call.............................................71

Answer a one-to-one call.........................................71

Make a group call ...............................................................72

Subscribe login status of others.....................................72

Camera..................................................................................54

Take pictures.................................................................54

Viewfinder......................................................................56

Tips on taking good photographs............................56

Record videos................................................................57

Gallery.....................................................................................58

View images and video clips.....................................59

Presentations ................................................................59

Folders.............................................................................59

Music player..........................................................................59

RealPlayer™...........................................................................60

Play video.......................................................................60

Stream content over the air .....................................60

Receive RealPlayer settings......................................60

FlashPlayer.............................................................................61

Organise flash files......................................................61

Play flash files...............................................................62

Recorder.................................................................................62

Radio.......................................................................................62

Send a callback request ....................................................72 Remove calendar entries...................................................81

Respond to a callback request................................. 72 Calendar settings ................................................................81

Channels................................................................................ 72

Office........................................................82

Create your own channels........................................ 72

Calculator..............................................................................82

Talking to a channel................................................... 73

Calculate percentages................................................82

Respond to a channel invitation ....................................73

Converter...............................................................................82

View the push-to-talk log................................................ 73

Set base currency and exchange rates..................83

Log........................................................................................... 74

Notes ......................................................................................83

Recent calls ..................................................................74

Call duration................................................................. 74

Internet.....................................................84

Packet data ................................................................... 74

Services..................................................................................84

Monitor all communication events........................ 74

Access point for Services ..........................................84

Nokia Lifeblog ..................................................................... 75

Bookmarks view...........................................................84

Installation on your PC.............................................. 76

Make a connection .....................................................85

Connect your device and your PC...........................76

Browse............................................................................86

Copy items..................................................................... 77

Download and purchase items................................87

Post to the Web...........................................................77

End a connection.........................................................87

Import items from other sources............................ 78

Settings for Services...................................................88

Browse timeline and favourites .............................. 78

Web.........................................................................................89

More information........................................................ 78

Download!.............................................................................89

Calendar....................................................79

Connectivity.............................................90

Create calendar entries..................................................... 79

Bluetooth connectivity......................................................90

Set a calendar alarm.......................................................... 80

Settings..........................................................................91

Calendar views..................................................................... 80

Send data using Bluetooth connectivity ..............92

To-do view..................................................................... 80

Pair devices....................................................................92

Receive data using Bluetooth connectivity..........93

Switch off Bluetooth connectivity..........................93

Data cable..............................................................................93

PC connections.....................................................................94

CD-ROM .........................................................................94

Your device as a modem............................................94

Connection manager..........................................................94

Data connections.........................................................95

View data connection details...................................95

Wireless LAN.........................................................................95

Synchronisation ...................................................................96

Create a new synchronisation profile....................97

Synchronise data .........................................................98

Device manager ...................................................................98

Server profile settings ................................................98

Connection..................................................................103

Date & time.................................................................107

Security ........................................................................107

Call diverting ..............................................................110

Call barring..................................................................111

Network........................................................................111

Enhanc. sett. ...............................................................111

Positioning ..........................................................................112

Landmarks...........................................................................112

Voice commands ...............................................................113

Application manager........................................................114

Install applications and software .........................114

Remove applications and software......................115

Application settings..................................................116

Memory-Hard drive..........................................................116

Tools..............................................................................116

Digital Rights Management...........................................117

Tools.......................................................100

Troubleshooting.................................... 119

Q&A.......................................................................................119

Settings wizard ................................................................. 100

E-mail........................................................................... 100

Push to talk ................................................................ 100

Operator ...................................................................... 101

More information ..................................................... 101

Settings ............................................................................... 101

Phone ........................................................................... 101

Call settings................................................................ 102

Battery information ............................. 122

Charging and discharging...............................................122

Nokia battery authentication guidelines....................122

Care and maintenance ......................... 124

Additional safety information............. 125

Index ...................................................... 128

For your safety

Read these simple guidelines. Not following them may be

dangerous or illegal. Read the complete user guide for

further information.

SWITCH OFF WHEN REFUELING Do not use

the device at a refueling point. Do not use near

fuel or chemicals.

SWITCH ON SAFELY Do not switch the device

on when wireless phone use is prohibited or

when it may cause interference or danger.

SWITCH OFF NEAR BLASTING Follow any

restrictions. Do not use the device where

blasting is in progress.

ROAD SAFETY COMES FIRST Obey all local

laws. Always keep your hands free to operate

the vehicle while driving. Your first

consideration while driving should be road

safety.

USE SENSIBLY Use only in the normal

position as explained in the product

documentation. Do not touch the antenna

unnecessarily.

QUALIFIED SERVICE Only qualifiedpersonnel

may install or repair this product.

INTERFERENCE All wireless devices may be

susceptible to interference, which could affect

performance.

ENHANCEMENTS AND BATTERIES Use only

approved enhancements and batteries. Do not

connect incompatible products.

SWITCH OFF IN HOSPITALS Follow any

restrictions. Switch the device off near medical

equipment.

WATER-RESISTANCE Your device is not

water-resistant. Keep it dry.

SWITCH OFF IN AIRCRAFT Follow any

restrictions. Wireless devices can cause

interference in aircraft.

BACK-UP COPIES Remember to make

back-up copies or keep a written record of all

important information.

CONNECTING TO OTHER DEVICES When

connecting to any other device, read its user

guide for detailed safety instructions. Do not

connect incompatible products.

Warning: To use any features in this device, other

than the alarm clock, the device must be switched on.

Do not switch the device on when wireless device use

may cause interference or danger.

EMERGENCY CALLS Ensure the phone

function of the device is switched on and in

Network Services

service. Press the

as many times as

To use the phone you must have service from a wireless

service provider. Many of the features in this device

depend on features in the wireless network to function.

These network services may not be available on all

networks or you may have to make specific arrangements

with your service provider before you can utilize network

services. Your service provider may need to give you

additional instructions for their use and explain what

charges will apply. Some networks may have limitations

that affect how you can use network services. For instance,

some networks may not support all language-dependent

characters and services.

needed to clear the display and return to the

standby mode. Enter the emergency number,

then press

. Give your location. Do not

end the call until given permission to do so.

About your device

The wireless device described in this guide is approved for

use on the EGSM 900/1800/1900 and UMTS 2100

networks. Contact your service provider for more

information about networks.

When using the features in this device, obey all laws and

respect privacy and legitimate rights of others.

Your service provider may have requested that certain

features be disabled or not activated in your device. If so,

they will not appear on your device menu. Your device may

also have been specially configured. This configuration

may include changes in menu names, menu order and

icons. Contact your service provider for more information.

(including ringing tones), and other content from being

copied, modified, transferred or forwarded.

When taking and using images or video clips, obey all laws

and respect local customs as well as privacy and

legitimate rights of others.

This device supports WAP 2.0 protocols (HTTP and SSL) that

run on TCP/IP protocols. Some features of this device, such

as MMS, browsing, e-mail and content downloading via

browser or over MMS, require network support for these

technologies.

invalidate any approval or warranty, and may be

dangerous.

For availability of approved enhancements, please check

with your dealer. When you disconnect the power cord of

any enhancement, grasp and pull the plug, not the cord.

For availability and information on using SIM card services,

contact your SIM card vendor. This may be the service

provider, network operator, or other vendor.

Enhancements, batteries, and

chargers

Always switch the device off and disconnect the charger

before removing the battery.

Removing the battery before switching off the device may

corrupt the hard drive.

Check the model number of any charger before use with

this device. This device is intended for use when supplied

with power from a DC-4, AC-3 and AC-4 charger and from

an AC-1, ACP-7, ACP-8, ACP-9, ACP-12, LCH-8, LCH-9, or

LCH-12 charger when used with the charger adapter

CA-44.

The battery intended for use with this device is BL-5C.

Warning: Use only batteries, chargers, and

enhancements approved by Nokia for use with this

particular model. The use of any other types may

Your Nokia N91 8GB

Model number: Nokia N91-2

View memory consumption

Hereinafter referred to as Nokia N91.

Leaving applications running in the background increases

the demand on battery power and reduces the battery life.

To close applications running in the background, press and

Congratulations on your purchase of the Nokia N91. Your

device combines stereo sound, storage capacity for up to

6000 songs, over-the-air music downloads, access to your

music collection and smartphone functionality with Wi-Fi

and 2Mpix camera.

hold

to show open applications, scroll to an

, and select Yes to confirm.

application, press

To view what types of data you have in the device and how

much memory the different data types consume, press

, and select Tools > Hard drive. Select Options >

Memory details and scroll down to Free memory to view

the amount of free memory in the device.

Hard drive

Your device is equipped with a 8 GB hard drive providing

high capacity of storage room for different kind of files.

Sensors in the device will stop the hard drive if the

operating temperature is too low or too high, if the device

is dropped, or if the back cover of the device is removed.

Hard drives are fragile components that must be handled

with care. All impacts caused by shock, vibration,

bumping, and dropping or other mishandling of the

device, as well as extreme temperatures, humidity and

liquids, may cause the hard drive to malfunction and data

to be lost or corrupted.

Memory low—free memory

The device notifies you if the memory is getting low. If the

device memory starts to get low when your browser is

open, then the browser is closed automatically to free

some memory space.

To free device memory, transfer data to the hard drive in

File mgr.. Mark files to be moved, select Options > Move

to folder > Hard drive, and select a folder.

Do not remove the back cover when the device is switched

on.

Tip! To free memory from the device, use Image Store

available in Nokia PC Suite to transfer images, and

video clips to a compatible PC. See the CD-ROM

supplied in the sales package.

—You have missed calls. See ‘Voice calls’, p. 31.

—Shown if Ringing type is set to Silent and Message

alert tone, IM alert tone, and E-mail alert tone are set

to Off. See ‘Profiles—Set tones’, p. 28.

To remove data to free memory, use File mgr., or go to the

respective application. For example, you can remove the

following:

—The phone keypad is locked. See ‘Keypad lock

(keyguard)’, p. 17.

•

Messages from Inbox, Drafts, and Sent folders in

Messag.

Retrieved e-mail messages from the phone memory

Saved Web pages

Saved images, videos, or sound files

Contact information

Calendar notes

Downloaded applications. See also ‘Application

manager’, p. 114.

Any other data that you no longer need

—You have an active clock alarm. See ‘Clock’, p. 15.

•

—The second phone line is being used. See ‘Call

settings’, p. 102.

—All calls to the phone are diverted to another

number. If you have two phone lines, the divert indicator

for the first line is

and for the second

—A headset is connected to the phone.

—A data call is active.

•

—A GPRS or EDGE packet data connection is available.

—A GPRS or EDGE packet data connection is active.

Essential indicators

—The phone is being used in a GSM network.

—A GPRS or EDGE packet data connection is on hold.

These icons are shown instead of the signal strength

indicator (shown in the top left corner in the standby

mode). See ‘Packet data connections in GSM and UMTS

networks’, p. 103.

(network service)—The phone is being used in a UMTS

network. See ‘Network’, p. 111.

—You have one or more unread messages in the Inbox

folder in Messag..

You have received new e-mail in the remote mailbox.

—A UMTS packet data connection is available.

—A UMTS packet data connection is active.

—There are messages waiting to be sent in the Outbox

folder. See ‘Outbox—messages waiting to be sent’, p. 48.

—A UMTS packet data connection is on hold.

Help

—Bluetooth connectivity is On.

—Data is being transmitted using a Bluetooth

connection. See ‘Bluetooth connectivity’, p. 90.

Your device has context-sensitive help. You can access the

help from an application or from the main menu.

You have set the device to scan for wireless LANs, and

a wireless LAN is available. See ‘Wireless LAN’, p. 95.

When an application is open, to access help for the current

view, select Options > Help.

A wireless LAN connection is active in a network

that has encryption.

When you are reading the instructions, to switch between

help and the application that is open in the background,

A wireless LAN connection is active in a network that

does not have encryption.

press and hold

To open help from the main menu, select Tools > Help.

Select the desired application to view the help topics. To

search for help topics using keywords, select Options >

Search by keyword.

—A USB connection is active.

—You have an e-mail that has been read, waiting for

you to retrieve to your phone.

When you are reading a help topic, to view other related

topics, scroll left or right with the joystick.

—You have an e-mail that has not been read, waiting

for you to retrieve to your phone.

Tutorial

Nokia support on the Web

Check http://www.nokia.com/support or your local Nokia

Web site for the latest version of this guide, additional

information, downloads, and services related to your

Nokia product.

The tutorial gives you information about some of the

features of your device. To access the tutorial in the menu,

press , and select My Own > Tutorial and the section

you want to view.

To change the clock shown in the standby mode, scroll

down, and select Clock type > Analogue or Digital.

Clock

To allow the mobile phone network to update the time,

date, and time zone information to your phone (network

service), scroll down, and select Network operator time >

Auto-update. For the Network operator time setting to

take effect, the phone restarts.

Press , and select My Own > Clock.

To set a new alarm, select Options > Set alarm. Enter the

alarm time, and select OK. When the alarm is active, the

sign is shown.

To change the alarm tone, scroll down, and select Clock

To turn off the alarm, select Stop. When the alarm tone

sounds select Snooze to stop the alarm for five minutes,

after which it resumes. You can do this a maximum of five

times.

alarm tone.

World clock

If the alarm time is reached while the device is switched

off, the device switches itself on and starts sounding the

alarm tone. If you select Stop, the device asks whether you

want to activate the device for calls. Select No to switch

off the device or Yes to make and receive calls. Do not

select Yes when wireless phone use may cause

interference or danger.

Open Clock, and scroll right to open the world clock view.

In the world clock view, you can view the time in different

cities.

To add cities to the list, select Options > Add city. Enter

the first letters of the city name. The search field appears

automatically, and the matching cities are displayed.

Select a city. You can add a maximum of 15 cities to the

list.

To cancel an alarm, select Clock > Options > Remove

alarm.

To set your current city, scroll to a city, and select

Options > My current city. The city is displayed in the

clock main view, and the time in your phone is changed

according to the city selected. Check that the time is

correct and matches your time zone.

Clock settings

To change the clock settings, select Clock > Options >

Settings.

sound distortion or damage to the external device. Then

you can readjust the volume to the appropriate level.

Volume and loudspeaker control

To increase or decrease the volume level, when you have

an active call or are listening to a sound, press and hold

With some headsets you can only adjust the volume with

the volume keys of the headset. If you use the volume keys

of the device, the volume changes only after you detach

the headset.

on the left side of the device.

The built-in loudspeaker allows you to speak and listen to

the phone from a short distance without having to hold

the phone to your ear, for example, having it on a table

nearby. Sound applications use the loudspeaker by

default.

File manager

Warning: Listen to music at a moderate level.

Continuous exposure to high volume may damage your

hearing. Do not hold the device near your ear when the

loudspeaker is in use, because the volume may be

extremely loud.

Many features of the phone use memory to store data.

These features include contacts, messages, images, ringing

tones, calendar and to-do notes, documents, and

downloaded applications. The free memory available

depends on how much data is already saved in the phone

memory.

To locate the loudspeaker, see ‘Keys and parts’ in the

Quick start guide.

To browse files and folders in the device memory or hard

drive, press

to view the hard drive contents.

, and select Tools > File mgr.. Scroll right

To use the loudspeaker during a call, start a call, and select

Options > Activate loudsp..

To move or copy files to a folder, press

joystick at the same time to mark a file, and select Options

> Move to folder or Copy to folder.

and press the

To turn off the loudspeaker when you have an active call

or are listening to a sound, select Options > Activate

handset.

Many different file formats can be opened directly from

File manager. However, to get the full functionality you

should open the file in the corresponding application, not

in File manager.

Before connecting a device other than original Nokia

headphones to the headphone connector of your Nokia

N91, adjust the volume level to less than half to prevent

Icons in File mgr.:

Folder

Folder that has a subfolder

To find a file, select Options > Find , select the search

location and enter the text that matches the file name.

Tip! You can use Nokia Phone Browser available in

Nokia PC Suite to view the content of the device

memory and hard drive of your phone. See the CD-ROM

supplied in the sales package.

Keypad lock (keyguard)

To lock: Move the lock switch on top of the device next to

the power key, to the left. When you move the switch

when the slide cover is closed, all the keys are locked.When

you open the slide cover, all the keys are active.

To unlock: Move the switch to the right.

When the keypad lock is on, calls still may be possible to

the official emergency number programmed into your

device. Enter the emergency number, and press

Music player

Music player supports files with extensions AAC, AAC+,

eAAC+, MP3, WMA, MP4, M4A and DCF. Music player

does not necessarily support all features of a file format

or all the variations of file formats.

Controls

—Press to go to the next song. To fast forward, press

and hold.

—Press once to return to the beginning of the song. To

skip to the previous song, press within two seconds after a

song has started. To rewind through the song, press and

hold.

For more information on player, select Options > Help for

context sensitive help.

(including ringing tones), and other content from being

copied, modified, transferred or forwarded.

—Press to decrease volume. Located on the left side of

the device.

—Press to increase volume. Located on the left side of

the device.

Play a song

1 Press

, and select Music.

To lock all the keys of the device, slide the lock switch on

top of the device.

2 Move the joystick to navigate to a preferred song,

artist or other category and press the joystick to open

category lists.

Tip! You can also use the keys on the remote to

control the device. The lock switch on the side of the

remote control only locks the keys of the remote

control.

3 Press

Play/Pause key to play the selected song or

list of songs.

To open the Now playing view of the player from any

other view, press the Music access key. To return to

previous view, press it again.

To select more music to play in Now playing view, select

Options > Go to Music menu.

Indicators

Modify sound

Icons in Music player:

Equalizer

—Repeat one

To modify the tone of the music playback, select Options

—Repeat all

> Equaliser.

—Shuffle on

To use one of the preset equalizer settings, select it with

the joystick, and select Activate. Each preset has different

settings on a 8–band graphic equalizer.

—Loudspeaker muted

(displayed in volume pop-

up)

Modify equalizer presets

1 To create a new preset, select Options> New preset.

To modify an existing preset select Options > Edit.

2 To adjust the frequency settings, move the joystick to

the left or right to select low, mid, or, high frequency

and up or down to increase or decrease the volume of

the selected frequency band.

Play modes

Shuffle play

1 To switch random play on or off, select Options >

Shuffle.

3 To reset the settings to their original values, select

2 Select Off or On. The Now playing view is displayed

Options > Reset to defaults.

with or without the shuffle icon

in top right corner.

To delete a preset, scroll to it, and press

presets cannot be deleted.

. The default

Repeat play

1 To repeat the current song, all songs, or to switch

Audio settings

To modify the balance and stereo image or to enhance

bass, select Options > Audio settings.

repeat off, select Options > Repeat.

2 Select Off, All, or Repeat song. The Now playing view

is displayed with or without the repeat all

repeat song icon

in the top right corner.

Default access point:—Select whether to connect

automatically or ask before connecting. Only available

with WLAN.

Go to music shop

1 In Music menu, select Options > Go to Music shop.

(This option is not available if music service Web

address has not been defined. See ‘Music shop

settings’, p. 20)

User name:—Enter your user name for music shop. If this

field is left empty, you may have to enter your user name

at login.

2 Choose from the options on the screen to search,

browse, or select ringing tones.

Password:—Enter your password for music shop. If this

field is left empty, you may have to enter your password at

Music shop settings

The settings may also be predefined and not editable.

You must have valid Internet connections in order to use

this service. For more details, see ‘Access points’, p.104.

Transfer music

You can transfer music from a compatible PC or other

compatible devices using a USB cable or Bluetooth

connection. For details about connecting your device, see

‘Connectivity’, p.90.

The availability and appearance of music shop settings

may vary.

You also must have the Web address of the music shop

defined in music shop settings.

The requirements of the PC:

To change or define the Web address for the music shop,

in Music menu, select Options > Go to Music shop.

(Music shop may also be available as a separate shortcut

in Operator folder.)

•

Windows® XP operating system (or later)

a compatible version of Windows Media® player

application. You can get more detailed information

about Windows Media player compatibility from the

N91 section of the Nokia Web site.

In Music shop, select Options > Settings. Define the

following:

•

Nokia PC Suite 6.7 or later. The sofware is available for

installation on the sales package CD-ROM.

Address:—Enter the Web address of the music shop

service.

Connection method:

•

USB data cable DKE-2 (miniUSB - USB)

Bluetooth enabled compatible PC

USB cable connection

Connect the DKE-2 USB cable to a compatible PC and your

device. If you are using Windows XP, your device is

automatically recognised as an external hard drive. All the

applications in your device are closed, and the phone goes

offline.

Transfer from PC

You can use three different methods to transfer files:

•

To view your device on PC as an external hard drive

where you can transfer any data files, make the

connection with cable or Bluetooth connectivity. If you

are using the DKE-2 USB cable, select Data transfer as

the connection method in your device. This method

gives you total control of what you move and where,

but you cannot see all the file information. You may not

be able to transfer material that has been protected

against copying. To refresh the Library after you have

updated the song selection in your device, go to Music

menu, and select Options > Refresh Music library.

To synchronise music with Windows Media player,

attach the USB cable and select Media player as the

connection method. This method is good if you want to

synchronise all or some of the music files between a

compatible PC and your device.

To synchronise music with Windows Media player, select

Media player as the connection method. To select the

connection mode, use the joystick.

To change the default USB connection mode, press

select Connect. > Data cbl. and one of the options in

Data cable mode.

Music transfer

Both Windows Media player and Nokia Music Manager in

Nokia PC Suite have been optimized for transferring music

files. For information about transferring music with Nokia

Music Manager, see Nokia PC Suite User Guide provided

on the CD-ROM with your Nokia N91.

•

The following instructions have been written based on

information about the latest compatible Windows Media

player version available at the time of writing. However,

the details of the instructions especially concerning the

locations and naming of different options may not be

accurate and are subject to change. For more up-to-date

To use Nokia Music Manager in Nokia PC Suite, attach

the DKE-2 USB cable and select PC Suite as the

connection method.

information see the corresponding Windows Media player

guides and helps.

device, and click Set up Sync. Clear or select the Sync this

device automatically check box.

If the Sync this device automatically check box is

selected and you connect your device, your N91 music

library is automatically updated based on playlists you

have selected in Windows Media player.

Manual synchronisation

After connecting your device with a compatible PC,

Windows Media player selects manual sync, if there is

less than 8 GB of free storage room in your device or if

there is not enough storage room to fit your entire library.

With manual sync, you select the songs and playlists that

you want to move, copy, or remove.

If no playlists have been selected, the whole PC music

library is selected for syncronisation. Note that your PC

library may contain more files that can fit to the hard drive

of your Nokia N91. See Windows Media player help for

more information.

The first time you connect your device you must enter a

name that is used as the name of your device in Windows

Media player.

The playlists on your device are not synchronised with the

Windows Media player playlists.

To transfer selected manually:

1 After your device is connected with Windows Media

player, select your device in the Navigation pane, if

more than one device is connected.

Playlists

2 Drag the songs or albums to the List pane for

synchronisation. To remove songs or albums, select an

item in the list and click Remove from list .

3 Check that the List pane contains the files you want to

synchronise and that there is enough capacity on the

device. Click Start Sync. to start the synchronisation.

Create a playlist

To create a playlist of songs:

1 Select Options > Create playlist in Playlists view.

2 Enter a name for the playlist, and select OK or press the

joystick.

3 Expand and collapse an artist title to find the songs you

want to include in the playlist. Press the joystick to add

items. To show the song list under an artist title, move

Automatic synchronisation

To change the default file transfer option in Windows

Media player, click the arrow under Sync , select your

the joystick to the right. To hide the song list, move the

joystick to the left.

4 When you have made your selections, select Done.

6 Scroll to a new position.

7 Select Drop.

8 When you have reordered the list, select Done.

Tip! To grab and drop, you can also press the joystick.

Add songs to a playlist

You can add songs to an existing playlist or first create a

new playlist.

Remove songs from a playlist

You can remove songs from a playlist.

1 In a song list, select Options > Add songs.

2 Expand and collapse an artist title to find the songs you

want to include in the playlist. Press the joystick to add

items. To show the song list under an artist title, move

the joystick to the right. To hide the song list, move the

joystick to the left.

1 Scroll to a song in a playlist.

2 Select Options > Remove from playlist.

3 Select Yes to confirm. This deletion does not delete the

song from the device; it only removes it from the

playlist.

3 When you have made your selections, select Done.

Add items from views to a playlist

You can add songs, albums, artists, genres, and composers

from different views of the Music menuto existing or new

playlists.

Tip! You can even add songs to a playlist that is

currently playing.

To search for a song start entering letters with the

keypad.

1 In a view opened from the Music menu, select an item.

2 Select Options > Add to a playlist > Saved playlist or

New playlist.

3 If you selected New playlist, enter a name for the

playlist, and select OK. If you selected Saved playlist,

select the playlist and OK.

Reorder songs

1 Select Options > Reorder list in a playlist view.

2 The selected song is ready to be moved. Scroll up or

down to move it or leave it there.

3 Select Drop.

4 Scroll to the song you want to move.

5 Select Grab.

Tip! In some of the views you can select multiple

songs to be added by selecting Options > Mark/

Unmark > Mark.

Tip! You can add a song that you are currently

Available options

listening to to a playlist.

The following items are available as options in different

views of Music player.

Playlist details

In Playlists view, Select Options > Playlist details. The

following information is displayed:

Go to Now playing—Opens a view that displays

information about the song that is currently being played

Go to Music shop—Opens wireless connection to a Web

shop, where you can search for, browse, and purchase

music

Name—The name of the playlist

Songs—The current number of songs in the playlist

Location—The location of the playlist on the hard drive

Date—The date the playlist was last modified

Time—The time the playlist was last modified

Refresh Music library—Updates the library list by

scanning the hard drive for new songs and removing

broken links

Song details/Playlist details/Music library details—

Displays information about the selected item

Automatic playlists

The following playlists appear in the playlist view

automatically:

Help—Opens the help application

Create playlist—Opens a view where you can create a new

playlist

Most played tracks—Includes the 40 most-played songs

listed from the most recently played songs

Send—Allows you to send the selected item to another

compatible device

Recent tracks—Includes 40 most recently played songs in

reverse order, ending with the most recently played song.

Delete—Removes the selected item after confirmation. The

song is permanently deleted from the hard drive.

Recent additions—Includes songs that you have added to

the library within the past week.

Rename—Renames the selected item

Add to a playlist—Add the selected item to an existing

playlist or new playlist

Album art—Opens a view which will show you album art

currently attached to the selected album or song You can

change or add album art using images on your phone.

Rename items

1 Select an Artist, Album, Genre, or Composer from the

list.

Mark/Unmark—Allows you to select several items for

action

2 Select Options > Rename.

3 Enter the new name, and select OK. All songs

belonging to the selected artist, album, genre, or

composer are updated.

Set as ringing tone—Selects the selected song as the

ringing tone of the active profile. If you select songs from

the hard drive to be used as ringing tones, they may not

work with vibra. For optimal performance, store the ringing

tones in the device memory.

View and edit song details

In a song view, Select Options > Song details. The

Reorder list—Rearrange the songs of a playlist

following information is displayed and editable.

Options only in Now Playing view

Song name—The name of the song

Go to Music menu—Opens the Music menu view

Artist—The name of the artist

Shuffle—Switches the shuffle mode on or off. In shuffle

mode the songs are played in random order.

Album—The name of the album to which this song

belongs

Repeat—Repeats the song or all songs in the list that is

currently being played.

Track number—The song position in the album to which

this song belongs

Equaliser—Opens a view where you can adjust the sound

Year—The year in which the album was released

Genre—The style category to which this song belongs

Composer—The name of the composer of this song

Comment—Any other information about this song

frequency balance.

Audio settings—Opens a view where you can change the

sound balance, stereo image and bass response.

Start visualisation—Opens a list of available

visualizations.

To view details like Format, Duration, and Copyright,

select Options > View file details in Song details view.

3 Press Close to return to Now playing view.

Change album art

Library details

1 Select a song.

In Music menu select Options > Music library details.

2 Select Options > Album art.

3 Select Options > Change.

4 Scroll throough images from your Gallery, and select

Select:.

The following information is displayed:

Songs—The current number of songs in the library

Duration—The length of current songs together

Used—The total size of the files in the music libray

Available—Available hard disk space in gigabytes

Refreshed—The date when the libraray was last modified

5 To restore the original album art, select Restore

original.

About encoded audio

Applications like Windows Media player and Nokia Audio

Manager encode audio files with codecs like WMA or MP3

to save storage space. The encoding is done by removing

those parts of the audio signal that are not audible or only

barely audible by human ear.

Set a song as a ringing tone

1 Select a song.

2 Select Options > Set as ringing tone. The selected

song has been set as the ringing tone for the active

profile.

Regardless of the encoder and codec quality, the sound

quality of the resulting file is not as good as the original.

The basic codecs supported by this device are AAC, WMA,

and MP3. All of these have different variations.

Visualization

1 In Now playing view, select Options > Start

visualisation.

2 Select one of the available visulizations.

the complexity of the encoded material. When using VBR,

the encoding is optimized to preserve a constant audio

quality throughout the track, rather than losing quality for

complex music sections as with constant bitrate (CBR)

encoding.

Bitrates

When encoding audio, the quality of the resulting sound

depends on the sample rate and bit rate used for the

encoding. Sample rate is expressed as thousands of

samples per second (kHz), and for CD music the sample

rate is fixed at 44.1 kHz. Bit rate is expressed as kilobits per

second (Kbps). The higher the bitrate, the better the sound

quality.

The required quality level may depend on your demands,

the headphones used, and the surrounding noise. For MP3s

a bitrate between 128 and 192 Kbps usually gives results

good enough for listening to pop music with your device.

WMA or AAC generally gives a similar result as MP3 with

one step lower bitrate (96-160 Kbps). Variations of AAC,

such as AAC+ and enhanced AAC+ (eAAC+) provide CD

quality audio at bitrates as low as 48 Kbps. Classical music

and music with nuances usually require a higher bitrate

than basic pop music.

For speech or other sources where the quality of the sound

is less important than saving storage space, you can use

bitrates between 8 and 64 Kbps. At low bitrates WMA or

AAC generally gives better results than MP3.

Variable bitrate

Your device also supports variable bitrate (VBR). Variable

bitrate means that the bit rate of the encoding varies with

Personalize your device

Your service provider may have requested that certain

features be disabled or not activated in your device. If so,

they will not appear on your device menu. Your device

may also have been specially configured for your network

provider. This configuration may include changes in menu

names, menu order, and icons. Contact your service

provider for more information.

tone list and listen to each one before you make your

selection. To stop the sound, press any key.

When you choose a tone, Tone downloads opens a list of

bookmarks. You can select a bookmark and connect to a

Web page to download tones.

If you want the caller’s name to be said when your device

rings, select Options > Personalise, and set Say caller's

name to On. The caller’s name must be saved in Contacts.

Profiles—Set tones

To create a new profile, select Options > Create new.

If listen to music and Music profile is selected, you only

hear a beep for incoming calls and all the other alert tones

are switched off.

To set and customize the ringing tones, message alert

tones, and other tones for different events, environments,

or caller groups, press , and select Tools > Profiles. If

the currently selected profile is other than General, the

profile name is shown at the top of the display in the

standby mode.

Offline profile

The Offline profile lets you use the device without

connecting to the wireless network. When you activate the

Offline profile, the connection to the wireless network is

To change the profile, press

in the standby mode.

Scroll to the profile you want to activate, and select OK.

turned off, as indicated by

in the signal strength

indicator area. All wireless phone signals to and from the

device are prevented. If you try to send messages, they are

placed in the outbox to be sent later.

To modify a profile, press , and select Tools > Profiles.

Scroll to the profile, and select Options > Personalise.

Scroll to the setting you want to change, and press the

joystick to open the choices. Tones stored on the hard

drive are indicated with

. You can scroll through the

When you have activated the Offline profile, you can still

use the wireless LAN (if available) to read your e-mail or

browse on the Internet, for example. Remember to comply

with any applicable safety requirements when establishing

and using a wireless LAN connection. See ‘Wireless LAN’,

p. 95.

Change the look of your

device

To change the look of the display, such as the wallpaper

and icons, press , and select Tools > Themes. The active

theme is indicated by

together elements from other themes or select images

. In Themes you can group

Warning: In the offline profile you cannot make (or

receive) any calls, except make calls to certain

emergency numbers, or use other features that require

network coverage. To make calls, you must first activate

the phone function by changing profiles. If the device

has been locked, enter the lock code.

from the Gallery to personalize themes further. The

themes on the hard drive are indicated by

To open a browser connection and download more

themes, select Theme downloads.

To activate a theme, scroll to it, and select Options >

Apply. To preview a theme before activating it, select

Options > Preview.

Warning: Your device must be switched on to use

Offline profile. Do not switch the device on when

wireless device use is prohibited or when it may cause

interference or danger.

To edit themes, scroll to a theme, and select Options >

Edit to change the Wallpaper and Power saver settings.

To leave the Offline profile, press

, and select Tools >

To restore the selected theme to its original settings,

select Options > Restore orig. theme when you edit a

theme.

Profiles, scroll to another profile, and select Options >

Activate > Yes. The device re-enables wireless

transmissions (providing there is sufficient signal

strength). If Bluetooth connectivity is activated before

entering the Offline profile, it will be deactivated.

Bluetooth connectivity is automatically reactivated after

leaving the Offline profile. See ‘Settings’, p. 91.

Active standby mode

Use your standby display for fast access to your most

frequently used applications. By default, the active

standby mode is on.

Press

, select Tools > Settings > Phone > Standby

mode > Active standby, and press the joystick to switch

the active standby on or off.

The active standby display is

shown with default

applications across the top

of the screen, and calendar,

to-do, and player events are

listed below.

Scroll to an application or

event, and press the joystick.

The standard joystick

shortcuts available in the

standby mode cannot be

used when the active standby mode is on.

To change the default application shortcuts, press

select Tools > Settings > Phone > Standby mode >

Active standby apps., and press the joystick.

Some shortcuts may be fixed, and you cannot change

them.

Make calls

letters of the name to the search field. Matching contacts

are listed. Press to call.

Voice calls

Tip! To increase or decrease the volume during a call,

You must copy the contacts from your SIM to Contacts

before you can make a call this way. See ‘Copy contacts’,

p. 36.

press the keys on the left side of the device.

1 In the standby mode, enter the phone number,

including the area code. Press

For international calls, press

to remove a number.

twice for the +

To call your voice mailbox (network service), press and

hold

110.

in the standby mode. See also ‘Call diverting’, p.

character (replaces the international access code), and

enter the country code, area code (omit the leading

zero if necessary), and phone number.

Tip! To change the phone number of your voice

mailbox, press

Options > Change number. Enter the number

, and select Tools > Voice mail >

2 Press

3 Press

attempt).

to call the number.

to end the call (or to cancel the call

(obtained from your service provider), and select OK.

Tip! You can also use the

key on the remote

To call a recently dialled number in the standby mode,

control to answer and end a call.

press

called or attempted to call. Scroll to the number you want,

and press to call the number.

to access a list of the 20 last numbers you

Pressing

always ends a call, even if another

application is active.

Tip! To end a call when you are not using the headset,

press during the call, and close the slide within

Make a conference call

15 seconds. Closing the slide when you are using the

headset does not end the call.

1 Make a call to the first participant.

2 To make a call to another participant, select Options >

New call. The first call is automatically put on hold.

To make a call from Contacts, press

, and select

Contacts. Scroll to the desired name, or enter the first

3 When the new call is answered, to join the first

participant in the conference call, select Options >

Conference.

number, and select Options > Assign.

is reserved for

the voice mailbox.

To call in the standby mode, press the speed dial key and

To add a new person to the call, repeat step 2, and

select Options > Conference > Add to conference.

Your device supports conference calls between a

maximum of six participants, including yourself.

To have a private conversation with one of the

participants, select Options > Conference > Private.

Scroll to a participant, and select Private. The

conference call is put on hold on your device. The other

participants can still continue the conference call.

Once you have finished the private conversation,

select Options > Conference > Add to conference to

return to the conference call.

Voice dialling

Your device supports enhanced voice commands.

Enhanced voice commands are not dependent on the

speaker’s voice, so the user does not record voice tags in

advance. Instead, the device creates a voice tag for the

entries in contacts, and compares the spoken voice tag to

it. The voice recognition in the device adapts to the main

user’s voice to recognise the voice commands better.

The voice tag for a contact is the name or nickname that is

saved on the contact card. To listen to the synthesised

voice tag, open a contact card, and select Options > Play

voice tag.

To drop a participant, select Options > Conference>

Drop participant, scroll to the participant, and select

Drop.

4 To end the active conference call, press

Make a call with a voice tag

Speed dial a phone number

Note: Using voice tags may be difficult in a noisy

environment or during an emergency, so you should not

rely solely upon voice dialling in all circumstances.

To activate speed dialling, press

, and select Tools>

Settings > Call > Speed dialling > On.

When you use voice dialling, the loudspeaker is in use. Hold

the device at a short distance away when you say the voice

tag.

To assign a phone number to one of the speed dialling

keys (

—

), press

, and select Tools > Spd. dial.

Scroll to the key to which you want to assign the phone

1 To start voice dialling, press and hold the

right

Tip! You can also use the

key on the remote

selection key. If you are using a compatible headset

with the headset key, press and hold the headset key to

start voice dialling.

control to answer and end a call.

If you do not want to answer a call, press

to reject

it. If you have activated the Call divert > If busy function

to divert calls, rejecting an incoming call also diverts the

call. See ‘Call diverting’, p. 110.

2 A short tone is played, and Speak now is displayed. Say

clearly the name or nickname that is saved on the

contact card.

When you reject an incoming call, you can also select

Send text message to send a message to the caller

informing why you cannot answer the call. You can edit

the text before sending it. To set up this option and write

a standard text message, see ‘Call settings’, p. 102.

3 The device plays a synthesised voice tag for the

recognised contact in the selected device language,

and displays the name and number. After a timeout of

1.5 seconds, the device dials the number.

If the recognised contact was not correct, select Next

to view a list of other matches, or Quit to cancel voice

dialling.

Call waiting (network service)

If several numbers are saved under the name, the device

selects the default number, if it has been set. Otherwise

the device selects the first available number of the

following: Mobile, Mobile (home), Mobile (business),

Telephone, Tel. (home), and Tel. (business).

You can answer a call while you have another call in

progress if you have activated Call waiting in Settings >

Call > Call waiting.

Tip! To change the device tones for different

environments and events, for example, when you want

your device to be silent, see ‘Profiles—Set tones’, p. 28.

Answer or reject a call

To answer the waiting call, press

on hold.

. The first call is put

To answer the call, press

or open the slide cover.

To switch between the two calls, select Swap. Select

Options > Transfer to connect an incoming call or a call

on hold with an active call and to disconnect yourself from

To mute the ringing tone when a call comes in, select

Silence.

the calls. To end the active call, press

. To end both

calls, select Options > End all calls.

Options during a voice call

Many of the options that you can use during a voice call

are network services. Select Options during a call for

some of the following options: Mute or Unmute, Answer,

Reject, Swap, Hold or Unhold, Activate handset,

Activate loudsp., or Activate handsfree (if a compatible

headset with Bluetooth connectivity is attached), End

active call or End all calls, New call, Conference, and

Transfer. Select from the following:

Replace—To end an active call and replace it by answering

the waiting call.

Send MMS (in UMTS networks only)—To send an image or

a video in a multimedia message to the other participant

of the call. You can edit the message and change the

recipient before sending. Press

to send the file to a

compatible device (network service).

Send DTMF—To send DTMF tone strings, for example, a

password. Enter the DTMF string or search for it in

Contacts. To enter a wait character (w) or a pause

character (p), press

tone.

repeatedly. Select OK to send the

Tip! You can add DTMF tones to the Phone number

or DTMF fields in a contact card.

Contacts (Phonebook)

Press , and select Contacts. In Contacts you can add a

personal ringing tone or a thumbnail image to a contact

card. You can also create contact groups, which allow you

to send text messages or e-mail to many recipients at the

same time. You can add received contact information

(business cards) to contacts. See ‘Data and settings’, p. 44.

Contact information can only be sent to or received from

compatible devices.

eachcontact you want to delete. Press

marked contacts.

to delete the

Tip! To add and edit contact cards, use Nokia

Contacts Editor available in Nokia PC Suite. See the

CD-ROM supplied with your device.

To attach a small thumbnail image to a contact card, open

the contact card, and select Options > Edit > Options >

Add thumbnail. The thumbnail image is shown when the

contact calls.

Tip! Regularly back up the device information. You

can restore the information, such as contacts, to the

device later. You can use Nokia PC Suite to back up your

contacts to a compatible PC. See the CD-ROM supplied

with your device.

Tip! Speed dialling is a quick way to call frequently

used numbers. You can assign speed dialling keys to

eight phone numbers. See ‘Speed dial a phone number’,

p. 32.

Tip! To send contact information, select the card you

want to send. Select Options > Send > Via text

message, Via multimedia, Via e-mail, or Via

Bluetooth. See ‘Messaging’, p. 38 and ‘Send data using

Bluetooth connectivity’, p. 92.

Save names and numbers

1 Select Options > New contact.

2 Fill in the fields that you want, and select Done.

To edit contact cards in Contacts, scroll to the contact

card you want to edit, and select Options > Edit.

To add a contact to a group, select Options > Add to

group: (shown only if you have created a group). See

‘Create contact groups’, p. 37.

To delete a contact card in Contacts, select a card, and

press

time, press and hold

. To delete several contact cards at the same

and press the joystick to mark

To view the amount of contacts, groups, and the available

memory, select Contacts > Options > Contacts info.

stored on the SIM card. In the SIM directory you can add,

edit, or copy numbers to contacts, and you can make calls.

To view the list of fixed dialing numbers, select Options >

SIM contacts > Fixed dialling contacts. This setting is

only shown if supported by your SIM card.

Default numbers and addresses

You can assign default numbers or addresses to a contact

card. In this way if a contact has several numbers or

addresses, you can easily call or send a message to the

contact at a certain number or address. The default

number is also used in voice dialing.

To restrict calls from your device to selected phone

numbers, select Options > Activ. fixed dialling. To add

new numbers to the fixed dialing list, select Options >

New SIM contact. You need the PIN2 code for these

functions.

1 In contacts, scroll to a contact, and press the joystick.

2 Select Options > Defaults.

When you use Fixed dialling, packet data connections are

not possible, except when sending text messages over a

packet data connection. In this case, the message center

number and the recipient’s phone number must be

included on the fixed dialing list.

3 Select a default to which you want to add a number or

an address, and select Assign.

4 Select a number or an address you want to set as a

default.

The default number or address is underlined in the contact

card.

When fixed dialing is activated, calls may be possible to

the official emergency number programmed into your

device.

SIM directory and SIM services

For availability and information on using SIM card

services, contact your SIM card vendor. This may be the

service provider, network operator, or other vendor.

Copy contacts

To copy names and numbers from a SIM card to your

device, press

, and select Contacts > Options > SIM

contacts > SIM directory. Select the names you want to

copy and Options > Copy to Contacts.

Press , and select Contacts > Options > SIM

contacts > SIM directory to see the names and numbers

To copy contacts to your SIM card, press

, and select

Create contact groups

Contacts. Select the names you want to copy and

Options > Copy > To SIM directory. Only the contact card

fields supported by your SIM card are copied.

1 In Contacts, move the joystick right to open the groups

list.

2 Select Options > New group.

3 Write a name for the group or use the default name

Group (number), and select OK.

4 Open the group, and select Options > Add members.

5 Scroll to a contact, and press the joystick to mark it. To

add multiple members at a time, repeat this action on

all the contacts you want to add.

To edit phone number to which calls from your device are

allowed, press

, and select Contacts > Options > SIM

contacts > Fixed dialling contacts. Scroll to the contact

and select Options > Edit. You may need your PIN2 code

to edit your fixed dialling numbers.

Tip! You can synchronise your contacts to a

compatible PC with Nokia PC Suite. See the CD-ROM

supplied with your device.

6 Select OK to add the contacts to the group.

To rename a group, select Options > Rename, enter the

new name, and select OK.

Add ringing tones for contacts

Remove members from a group

1 In the groups list, open the group you want to modify.

2 Scroll to the contact, and select Options > Remove

from group.

When a contact or group member calls you, the device

plays the chosen ringing tone (if the caller’s telephone

number is sent with the call and your device recognises it).

1 Press the joystick to open a contact card, or go to the

groups list, and select a contact group.

2 Select Options > Ringing tone. A list of ringing tones

opens.

3 Select Yes to remove the contact from the group.

Tip! To check to which groups a contact belongs,

scroll to the contact, and select Options > Belongs to

groups.

3 Select the ringing tone you want to use for the

individual contact or the selected group.

To remove the ringing tone, select Default tone from the

list of ringing tones.

Messaging

Press

, and select Messag.. In Messag., you can create,

Drafts—Draft messages that have not been sent are

stored here.

send, receive, view, edit, and organise text messages,

multimedia messages, e-mail messages, and special text

messages containing data. You can also receive messages

and data using Bluetooth connectivity, receive Web

service messages, cell broadcast messages, and send

service commands.

Sent—The last 20 messages that were sent, excluding

messages sent using Bluetooth connectivity, are stored

here. To change the number of messages to be saved, see

‘Other settings’, p. 53.

Outbox—Messages waiting to be sent are temporarily

stored here.

Note: Only devices that have compatible features

can receive and display multimedia messages. The

appearance of a message may vary depending on the

receiving device.

Example: Messages are placed in the outbox when

your device is outside network coverage. You can also

schedule e-mail messages to be sent the next time you

connect to your remote mailbox.

When you open Messag., you can see the New message

function and the following folders:

Reports—You can request the network to send you a

delivery report of the text messages and multimedia

messages you have sent (network service). Receiving a

delivery report of a multimedia message that has been sent

to an e-mail address may not be possible.

Inbox—Received messages, except e-mail and cell

broadcast messages, are stored here. E-mail messages are

stored in the Mailbox.

My folders—For organizing your messages into

folders.

Tip! When you have opened any of the default folders,

to switch between the folders, move the joystick to the

right or left.

Mailbox—Connect to your remote mailbox to

retrieve your new e-mail messages or view your previously

retrieved e-mail messages offline. See ‘E-mail’, p. 51.

To enter and send service requests (also known as USSD

commands), such as activation commands for network

services, to your service provider, select Options > Service

•

To switch between letter and number mode, press and

hold

If the next letter is located on the same key as the

present one, wait until the cursor appears (or quickly

move the joystick to the right to end the time-out

period), and enter the letter.

command in the main view of Messag..

Cell broadcast (network service) allows you to receive

messages on various topics, such as weather or traffic

conditions from your service provider. For available topics

and relevant topic numbers, contact your service provider.

In the main view of Messaging, select Options > Cell

broadcast. In the main view you can see the status of a

topic, a topic number, name, and whether it has been

flagged ( ) for follow-up.

•

To erase a character, press

. Press and hold

clear more than one character.

The most common punctuation marks are available

under . Press repeatedly to reach the desired

punctuation mark.

Press to open a list of special characters. Use the

joystick to move through the list, and press Select to

select a character.

Cell broadcast messages cannot be received in UMTS

networks. A packet data connection may prevent cell

broadcast reception.

•

To insert a space, press

next line, press three times.

To switch between the different character modes,

press

. To move the cursor to the

Write text

ABC, abc, and Abc indicate the selected character mode.

123 indicates the number mode.

Predictive text input—Predictive text

You can enter any letter with a single key press. Predictive

text input is based on a built-in dictionary to which you

Traditional text input

The indicator

is shown on the top right of the display

when you are writing text using traditional text input.

can also add new words.

is shown on the top right

of the display when you write text using predictive text

input.

•

Press a number key (

—

) repeatedly until the

desired character appears. There are more characters

available for a number key than are printed on the key.

To insert a number, press and hold the number key.

1 To activate predictive

Tip! To set predictive text input on or off, quickly press

twice.

text input, press

, and

select Predictive text on.

This activates predictive

text input for all editors

in the device.

Tips on text input

To insert a number in letter mode, press and hold the

desired number key.

2 To write the desired word,

To switch between the different character modes, press

press the keys

—

Press each key only once

for one letter. For

example, to write ‘Nokia’ when the English dictionary

To erase a character, press

. Press and hold

clear more than one character.

is selected, press

i, and for a.

The word suggestion changes after each press.

3 When you finish writing the word correctly, scroll right

to confirm it, or press to add a space.

for N,

for o,

for k,

for

Press

Tip! To insert several special characters at the same

time, press when you select each character.

The most common punctuation marks are available under

. Press , then repeatedly to search for the

desired punctuation mark.

to open a list of special characters.

If the word is not correct, press

each matching word, or press

Predictive text > Matches.

repeatedly to view

, and select

Tip! Predictive text input tries to guess which

commonly used punctuation mark (.,?!‘) is needed. The

order and availability of the punctuation marks depend

on the language of the dictionary.

If the ? character is shown after the word, the word is

not in the dictionary. To add a word to the dictionary,

select Spell, enter the word using traditional text

input, and select OK. The word is added to the

dictionary. When the dictionary is full, a new word

replaces the oldest added word.

Press

repeatedly to view the matching words the

dictionary has found one by one.

4 Start writing the next word.

Press , select Predictive text, and scroll right to select

one of the following options:

Matches—To view a list of words that correspond to your

Copy text to clipboard

key presses.

1 To select letters and words, press and hold

. At the

Insert word—To add a word to the dictionary by using

traditional text input. When the dictionary becomes full, a

new word replaces the oldest added word.

same time, move the joystick left or right. As the

selection moves, text is highlighted.

2 To copy the text to the clipboard, while still holding

Edit word—To edit the word using traditional text input.

This is available if the word is active (underlined).

, select Copy.

3 To insert the text into a document, press and hold

and select Paste, or press

once, and select Paste.

Tip! When you press

, the following options appear

To select lines of text, press and hold

time move the joystick up or down.

. At the same

(depending on the editing mode): Predictive text

(predictive text input), Alpha mode (traditional text

input), Number mode, Cut (if text has been selected),

Copy (if text has been selected), Paste (when text has

been cut or copied first), Insert number, Insert symbol,

and Writing language: (changes the input language

for all editors in the phone).

To remove the selected text from the document, press

Write and send messages

The appearance of a multimedia message may vary,

depending on the receiving device.

Write compound words

Write the first half of a compound word; to confirm it,

move the joystick right. Write the last part of the

compound word. To complete the compound word, press

to add a space.

(including ringing tones), and other content from being

copied, modified, transferred or forwarded.

Tip! You can start to create a message from any

application that has the option Send. Select a file

(image or text) to be added to the message, and select

Options > Send.

Turn predictive text input off

Press

, and select Predictive text > Off to turn

predictive text input off for all editors in the phone.

Before you can create a multimedia message or write an

e-mail, you must have the correct connection settings in

place. See ‘Receive MMS and e-mail settings’, p. 43 and

‘E-mail’, p. 51.

5 To add a media object to a multimedia message, select

Options > Insert object > Image, Sound clip, or Video

clip. When sound is added, the

icon is shown.

The wireless network may limit the size of MMS messages.

If the inserted picture exceeds this limit, the device may

make it smaller so that it can be sent by MMS.

You may not be able to send video clips that are saved

in the .mp4 format in a multimedia message. To change

the format in which recorded videos are saved, see

‘Video settings’, p. 58.

1 Select New message and one of the following:

Text msg.—to send a text message

6 To take a new picture or

Multimedia message—to send a multimedia message

(MMS)

record sound or video for

a multimedia message,

E-mail—to send an e-mail. If you have not set up your

e-mail account, you are prompted to do so. To start

creating the e-mail settings with the mailbox guide,

select Start.

select Insert new >

Image, Sound clip, or

Video clip. To insert a new

slide to the message,

select Slide.

To see what the

multimediamessagelooks

like, select Options >

Preview.

2 In the To field, press the joystick to select recipients or

groups from contacts, or enter the recipient’s phone

number or e-mail address. Press

to add a

semicolon (;) that separates the recipients. You can

also copy and paste the number or address from the

clipboard.

7 To add an attachment to an e-mail, select Options >

Tip! Scroll to a contact, and press the joystick to

mark it. You can mark several recipients at a time.

Insert > Image, Sound clip, Video clip or Note. E-mail

attachments are indicated by

3 In the Subject field, enter the subject of a multimedia

message or e-mail. To change the fields that are

visible, select Options > Address fields.

Tip! To send files other than sounds and notes as

attachments, open the appropriate application, and

select Send > Via e-mail, if available.

4 Move the joystick down to move to the message field

and write the message. To use a template, select

Options > Insert or Insert object > Template.

8 To send the message, select Options > Send, or press

Your device supports the sending of text messages beyond

the character limit for a single message. Longer messages

will be sent as a series of two or more messages. Your

service provider may charge accordingly. Characters that

use accents or other marks, and characters from some

language options like Chinese, take up more space limiting

the number of characters that can be sent in a single

message. In the navigation bar, you can see the message

length indicator counting backwards. For example, 10 (2)

means that you can still add 10 characters for the text to

be sent as two messages.

Options > Settings > Multimedia message > Image

size in the Messaging main view.

Note: The indicators showing that the

message has been sent indicate that the

message has been sent by your device to the

message center number programmed into your device.

This is not an indication that the message has been

received at the intended destination. For more details

about messaging services, check with your service

provider.

E-mail messages are automatically placed in Outbox

before sending. If sending does not succeed, the e-mail is

left in the Outbox.

Receive MMS and e-mail settings

You may receive the settings in a text message from your

network operator or service provider. See ‘Data and

settings’, p. 44.

Tip! In Messaging you can also create presentations

and send them in a multimedia message. In the

multimedia message editor view, select Options >

Create presentation (shown only if MMS creation

mode is set to Guided or Free). See ‘Multimedia

messages’, p. 50.

For availability of and subscription to data services,

contact your network operator or service provider. Follow

the instructions given by your service provider.

Enter the MMS settings manually:

1 Press

, and select Tools > Settings > Connection >

Tip! When you send a multimedia message to an

e-mail address or a device that supports the receiving

of large images, use the larger image size. If you are not

sure of the receiving device, or the network does not

support sending large files, it is recommended that you

use a smaller image size or a sound clip that is no

longer than 15 seconds. To change the setting, select

Access points, and define the settings for a

multimedia messaging access point. See ‘Connection’,

p. 103.

2 Press

, and select Messaging > Options >

Settings > Multim. msg. > Access point in use and

the access point you created as the preferred

connection. See also ‘Multimedia messages’, p. 50.

To reply to a received message, select Options > Reply.

Multimedia messages

Before you can send, receive, retrieve, reply to, and

forward e-mail, you must do the following:

Important: Excercise caution when opening

messages. Multimedia message objects may contain

malicious software or otherwise be harmful to your device

or PC.

•

Configure an Internet access point (IAP) correctly. See

‘Connection’, p. 103.

•

Define your e-mail settings correctly. If you select

Mailbox in the Messag. main view and have not set up

your e-mail account, you are prompted to do so. To

start creating the e-mail settings with the mailbox

guide, select Start. See ‘E-mail’, p. 51.

You may receive a notification that a multimedia message

is waiting in the multimedia message center. To start a

packet data connection to retrieve the message to your

device, select Options > Retrieve.

You must have a separate e-mail account. Follow the

instructions given by your remote mailbox and

Internet service provider (ISP).

When you open a multimedia message ( ), you may see

an image and a message.

is shown if sound is

included, or if video is included. To play the sound or

the video, select the indicator.

Inbox—receive messages

To see what kinds of media objects have been included in

the multimedia message, open the message, and select

Options > Objects.

Inbox folder has the following indicators:

—Unread text message.

If the message includes a multimedia presentation,

displayed. To play the presentation, select the indicator.

—Unread multimedia message.

—Data received through Bluetooth connectivity.

Data and settings

Your device can receive many kinds of messages that

contain data:

When you receive a message,

and the text 1 new

message are shown in the standby mode. To open the

message, select Show. To open a message in Inbox, scroll

to it, and press the joystick.

Configuration message—You may receive settings from

your network operator, service provider, or company

information management department in a configuration

message. To save the settings, select Options > Save all.

For availability and subscription, contact your service

provider.

My folders

In My folders, you can organise your messages into

Business card—To save the information to Contacts, select

Options > Save business card. Certificates or sound files

attached to the business card are not saved.

folders, create new folders, and rename and delete folders.

Tip! You can use texts in the templates folder to

avoid rewriting messages that you send often.

Ringing tone—To save the ringing tone, select Options >

Save.

Operat. logo—To have the logo shown in the standby

mode instead of the network operator’s own identification,

select Options > Save.

Mailbox

If you select Mailbox and have not set up your e-mail

account, you are prompted to do so. To start creating the

e-mail settings with the mailbox guide, select Start. See

also ‘E-mail’, p. 51.

Calen. entry—To save the invitation, select Options >

Save to Calendar.

Web message—To save the bookmark to the bookmarks

list in Web, select Options > Add to bookmarks. If the

message contains both access point settings and

When you create a new mailbox, the name you give to the

mailbox replaces Mailbox in the Messaging main view.

You can have up to six mailboxes.

bookmarks, to save the data, select Options > Save all.

E-mail notif.—The note tells you how many new e-mail

messages you have in your remote mailbox. An extended

notification may list more detailed information.

Open the mailbox

When you open the mailbox, the device asks if you want

to connect to the mailbox (Connect to mailbox?).

Web service messages

Web service messages ( ) are notifications (for example,

news headlines) and may contain a text message or a link.

To connect to your mailbox and retrieve new e-mail

headings or messages, select Yes. When you view

messages online, you are continuously connected to a

remote mailbox using a data connection. See also

‘Connection’, p. 103.

The new e-mail (offline or online mode) has not

been retrieved to your device.

The new e-mail has been retrieved to your device.

The e-mail message has been read, and it has not

been retrieved to your device.

To view previously retrieved e-mail messages offline,

select No. When you view e-mail messages offline, your

device is not connected to the remote mailbox.

The e-mail message has been read.

The e-mail heading has been read and the message

content has been deleted from the device.

3 To open an e-mail message, press the joystick. If the

e-mail message has not been retrieved and you are

offline, you are asked if you want to retrieve this

message from the mailbox.

Retrieve e-mail messages

If you are offline, select Options > Connect to start a

connection to a remote mailbox.

Important: Excercise caution when opening

messages. E-mail messages may contain malicious

software or otherwise be harmful to your device or PC.

To view e-mail attachments, open a message that has the

attachment indicator , and select Options >

Attachments. If the attachment has a dimmed indicator,

it has not been retrieved to the device; select Options >

Retrieve. In the Attachments view, you can retrieve, open,

save, or remove attachments. You can also send

attachments using Bluetooth connectivity.

1 When you have an open connection to a remote

mailbox, select Options > Retrieve e-mail and one of

the following:

New—to retrieve all new e-mail messages

Selected—to retrieve only the e-mail messages that

have been marked

All—to retrieve all messages from the mailbox

To stop retrieving messages, select Cancel.

2 After you retrieve the e-mail messages, you can

continue viewing them online, or select Options >

Disconnect to close the connection and view the

e-mail messages offline.

Tip! If your mailbox uses the IMAP4 protocol, you can

define how many messages to retrieve, and whether to

retrieve the attachments. With the POP3 protocol, the

options are Headers only, Size limit, or Msgs. &

attachs..

E-mail status indicators:

If you are offline, the e-mail is deleted first from your

device. During the next connection to the remote mailbox,

it is automatically deleted from the remote mailbox. If you

are using the POP3 protocol, messages marked to be

deleted are removed only after you have closed the

connection to the remote mailbox.

Retrieve e-mail messages

automatically

To retrieve messages automatically, select Options > E-

mail settings > Automatic retrieval > Header retrieval >

Always enabled or Only in home net., and define when

and how often the messages are retrieved.

To cancel deleting an e-mail from the device and server,

scroll to an e-mail that has been marked to be deleted

during the next connection ( ), and select Options >

Restore.

Retrieving e-mail messages automatically may increase

your call costs due to the data traffic.

Delete e-mail messages

Disconnect from the mailbox

When you are online, select Options > Disconnect to end

the packet data connection to the remote mailbox.

To delete the contents of an e-mail message from the

device while still retaining it in the remote mailbox, select

Options > Delete. In Delete msg. from:, select Phone

only.

Tip! You can also leave your mailbox connection

open and the new e-mails (Headers only as default)

will be retrieved from the remote mailbox to your

device automatically (only if the IMAP IDLE function is

supported by your server). To leave the messaging

application open in the background, press

Leaving the connection open may increase your call

costs due to the data traffic.

The device mirrors the e-mail headings in the remote

mailbox. Although you delete the message content, the

e-mail heading stays in your device. If you want to remove

the heading as well, you must first delete the e-mail

message from your remote mailbox, then make a

connection from your device to the remote mailbox again

to update the status.

twice.

View e-mail messages when offline

When you open Mailbox the next time and you want to

view and read the e-mail messages offline, answer No to

the Connect to mailbox? query. You can read the

To delete an e-mail from the device and the remote

mailbox, select Options > Delete. In Delete msg. from:,

select Phone and server.

previously retrieved e-mail headings, the retrieved e-mail

messages, or both. You can also write new, reply to, or

forward e-mail to be sent the next time you connect to

the mailbox.

Example: Messages are placed in the outbox, for

example, when your device is outside network coverage.

You can also schedule e-mail messages to be sent the next

time you connect to your remote mailbox.

Outbox—messages waiting to be View messages on a SIM card

sent

Before you can view SIM messages, you must copy them to

a folder in your device.

Outbox is a temporary storage place for messages waiting

1 In the Messag. main view, select Options > SIM

to be sent.

messages.

Status of the messages in Outbox are as follows:

2 Select Options > Mark/Unmark > Mark or Mark all to

mark messages.

Sending—A connection is being made, and the message is

being sent.

3 Select Options > Copy. A list of folders opens.

4 To start copying, select a folder and OK. To view the

messages, open the folder.

Waiting/Queued—The message will be sent when

previous messages of a similar type have been sent.

Resend at (time)—The device will try to send the message

again after a time-out period. Select Send to restart the

sending immediately.

Messaging settings

Fill in all fields marked with Must be defined or with a red

asterisk. Follow the instructions given by your service

provider. You may also obtain settings from your service

provider in a configuration message.

Deferred—You can set documents to be on hold while

they are in Outbox. Scroll to a message that is being sent,

and select Options > Defer sending.

Some or all message centers, access points or other

settings may be preset for your device by your service

provider or network operator, and you may not be able to

change, create, edit, or remove them.

Failed—The maximum number of sending attempts has

been reached. Sending has failed. If you were trying to

send a text message, open the message, and check that

the Sending options are correct.

Preferred conn.—Select the connection used for sending

text messages: GSM network or packet data, if supported

by the network. See ‘Connection’, p. 103.

Text messages

Press

, and select Messag. > Options > Settings >

Text msg. and from the following:

Reply via same ctr.—Select whether you want the reply

message to be sent using the same text message center

number (network service).

Message centres—View a list of all text message centers

that have been defined.

Msg. centre in use—Select which message center is used

to deliver text messages.

Add new and edit text message centers

Note that if you change your SIM card, the list of available

text message centers is updated according to the centers

on the new SIM card. Message centers may also be preset

in your device by your service provider, and you may not

be able to create, edit, or delete them.

SMS e-mail—To send and receive text messages to and

from e-mail addresses, enter the e-mail gateway and

e-mail message center.

Character encoding— To use character conversion to

another encoding system when available, select Reduced

support.

1 Select Message centres > Options > New msg.

centre or Edit.

2 Press the joystick, write a name for the message

Receive report—Select whether the network sends

center, and select OK.

delivery reports on your messages (network service).

3 Scroll down, press the joystick, and write the number

of the text message center. You receive the number

from your service provider.

Message validity—Select how long the message center

resends your message if the first attempt fails (network

service). If the recipient cannot be reached within the

validity period, the message is deleted from the message

center.

4 Select OK.

5 To use the new settings, go back to the settings view.

Scroll to Msg. centre in use, and select the new

message center.

Message sent as—Change this option only if you are sure

that your message center is able to convert text messages

into these other formats. Contact your network operator.

connection to retrieve the message both in and outside

your home network.

Multimedia messages

Press

, and select Messag. > Options > Settings >

Allow anon. msgs.—Select whether you want to reject

messages from an anonymous sender.

Multimedia message and from the following:

Image size—Define the size of the image in a multimedia

message: Original (shown only when the MMS creation

mode is set to Guided or Free), Small, or Large.

Receive adverts—Define whether you want to receive

multimedia message advertisements.

Receive report—Select whether you want the status of the

sent message to be shown in the log (network service).

Receiving a delivery report of a multimedia message that

has been sent to an e-mail address may not be possible.

MMS creation mode—If you select Guided, the device

informs you if you try to send a message that may not be

supported by the recipient. Select Restricted; the device

prevents you from sending messages that may not be

supported.

Deny report sending—Select whether you want to deny

your device sending delivery reports of received

multimedia messages.

Access point in use—Select which access point is used as

the preferred connection for the multimedia message

center.

Message validity—Select how long the message center

resends your message if the first attempt fails (network

service). If the recipient cannot be reached within the

validity period, the message is deleted from the message

center.

Multimedia retrieval—Select how you want to receive

multimedia messages. To receive multimedia messages

automatically in your home network, select Auto. in

home network. Outside your home network, you receive

a notification that there is multimedia message that you

can retrieve in the multimedia message center.

Tip! You may also obtain the multimedia and e-mail

settings from your service provider in a configuration

message. Contact your service provider for more

information. See ‘Data and settings’, p. 44.

When you are outside your home network, sending and

receiving multimedia messages may cost you more.

If you select Multimedia retrieval > Always automatic,

your device automatically makes an active packet data

Mailbox type—Defines the e-mail protocol that your

remote mailbox service provider recommends. The options

are POP3 and IMAP4. This setting can be selected only

once and cannot be changed if you have saved or exited

from the mailbox settings. If you use the POP3 protocol,

e-mail messages are not updated automatically when you

are online. To see the latest e-mail messages, you must

disconnect and make a new connection to your mailbox.

E-mail

Press

, and select Messag. > Options > Settings > E-

mail and from the following:

Mailboxes—Select a mailbox to change the following

settings: Connection settings, User settings, Retrieval

settings, and Automatic retrieval.

Mailbox in use— Select which mailbox you want to use for

sending e-mail.

Security (ports)—Select the security option used to

secure the connection to the remote mailbox.

To create a new mailbox, select Options > New mailbox in

the mailbox main view.

Port—Define a port for the connection.

APOP secure login (for POP3 only)—Use with the POP3

protocol to encrypt the sending of passwords to the

remote e-mail server while connecting to the mailbox.

Connection settings

To edit the settings for the e-mail you receive, select

Incoming e-mail and from the following:

To edit the settings for the e-mail you send, select

Outgoing e-mail and from the following:

User name—Enter your user name, given to you by your

service provider.

My e-mail address—Enter the e-mail address given to you

by your service provider. Replies to your messages are sent

to this address.

Password—Enter your password. If you leave this field

blank, you are prompted for the password when you try to

connect to your remote mailbox.

Outgoing mail serv.—Enter the IP address or host name of

the mail server that sends your e-mail. You may only be

able to use the outgoing server of your network operator.

Contact your service provider for more information.

Incoming mail serv.—Enter the IP address or host name of

the mail server that receives your e-mail.

Access point in use—Select an Internet access point (IAP).

See ‘Connection’, p. 103.

Access point in use—Select an Internet access point (IAP).

See ‘Connection’, p. 103.

Mailbox name—Enter a name for the mailbox.

The settings for User name, Password, Security (ports),

and Port are similar to the ones in Incoming e-mail.

Retrieval amount—Define how many new e-mail

messages are retrieved to the mailbox.

IMAP4 folder path (for IMAP4 only)—Define the folder

User settings

My name—Enter your own name. Your name replaces

your e-mail address in the recipient’s device when the

recipient’s device supports this function.

path for folders to be subscribed.

Folder subscriptions (for IMAP4 only)—Subscribe to other

folders in the remote mailbox and retrieve content from

those folders.

Send message—Define how e-mail is sent from your

device. Select Immediately for the device to connect to

the mailbox when you select Send message. If you select

During next conn., e-mail is sent when the connection to

the remote mailbox is available.

Automatic retrieval

Header retrieval—Select whether you want the device to

retrieve new e-mail automatically. You can define when,

and how often, the messages are retrieved.

Send copy to self—Select whether you want to save a

copy of the e-mail to your remote mailbox and to the

address defined in My e-mail address.

Retrieving e-mail messages automatically may increase

your call costs due to the data traffic.

Include signature—Select whether you want to attach a

Web service messages

signature to your e-mail messages.

Press

, and select Messaging > Options > Settings >

New e-mail alerts—Select whether you want to receive

the new e-mail indications, a tone and a note, when new

mail is received to the mailbox.

Service message. Select whether you want to receive

service messages. If you want to set the device to

automatically activate the browser and start a network

connection to retrieve content when you receive a service

message, select Download messages > Automatically.

Retrieval settings

E-mail to retrieve—Define which parts of the e-mail are

retrieved: Headers only, Size limit, Messages (for IMAP4

only), or Msgs. & attachs..

Memory in use—Select the memory where you want to

save your messages: Phone memory or Hard drive.

Cell broadcast

Check the available topics and related topic numbers with

your service provider. Press

Options > Settings > Cell broadcast and from the

following:

, and select Messaging >

Reception—Select whether you want to receive cell

broadcast messages.

Language—Select the languages in which you want to

receive messages: All, Selected, or Other.

Topic detection—Select whether the device automatically

searches for new topic numbers, and saves the new

numbers without a name to the topic list.

Other settings

Press

, and select Messaging > Options > Settings >

Other and from the following:

Save sent messages—Select whether you want to save a

copy of the text messages, multimedia messages, or e-mail

that you send to the Sent folder.

No. of saved msgs.—Define how many sent messages are

saved to the Sent folder at a time. The default limit is 20

messages. When the limit is reached, the oldest message is

deleted.

Media applications

When taking a picture, note the following:

Camera

•

To keep the camera still, use both hands.

To adjust colour before taking a picture, select Options

> Adjust > White balance or Colour tone. See ‘Adjust

colour’, p. 55.

The Nokia N91 supports an image capture resolution of

1600 x 1200 pixels. The image resolution in these

materials may appear different.

•

The quality of a zoomed picture is lower than that of a

nonzoomed picture.

The camera goes into battery saving mode if there are

no key presses for a moment. To continue taking

pictures, press the joystick.

To activate the camera, press in the Standby view, and

select Camera. The camera starts, and you can see the

view to be captured.

If the camera is in Video mode, move the joystick to the

left to start Image mode.

After the image is taken:

•

To discard the image, select Options > Delete.

To send the image Via multimedia, Via e-mail, or Via

Bluetooth, select Options > Send. For more

information, see ‘Messaging’, p. 38 and ‘Bluetooth

connectivity’, p. 90.

The images are automatically saved in the gallery in .jpg

format. You can send images in a multimedia message as

an e-mail attachment or by using Bluetooth connectivity.

Take pictures

•

To send an image to the other party during an active

call, select Options > Send MMS.

To take a picture, press the joystick. Do not move the

device before the image is saved. The image is saved

automatically in the Images folder of Gallery. See

‘Gallery’, p. 58.

Exposure modes

•

To set the camera to take six pictures in a sequence,

select Options> Sequence mode. You can also use the

sequence mode with the Self-timer. See ‘You in the

Saving the captured image may take longer if you change

the zoom, lighting, or colour settings.

picture—self-timer’, p. 55. The pictures are

automatically saved in Gallery.

After you take the pictures, they are shown in a grid on

the main display. To view a picture, press the joystick to

open it.

To set the camera to take pictures in low light

conditions, select Options > Night mode

The screen display changes to match any settings made,

showing you how the change affects the pictures or

videos.

The settings return to the default settings when you close

the camera.

•

Adjust still image camera settings

To change the main settings, select Options > Settings.

These settings remain the same until you change them.

Select from the following options:

You in the picture—self-timer

Use the self-timer to delay the capture so that you can

include yourself in the picture. To set the self-timer delay,

select Options > Self-timer > 10 seconds, 20 seconds, or

30 seconds. To activate the self-timer, select Activate. The

self-timer indicator ( ) blinks and the device beeps when

the timer is running. The camera takes the picture after the

selected delay elapses. You can also use the Self-timer in

the sequence mode. See ‘Exposure modes’, p. 54.

Image quality—High, Normal, or Basic. The better the

image quality, the more memory the image consumes.

Image resolution—Select the resolution you want to use.

The higher the image resolution, the more memory the

image consumes. The quality of a zoomed picture is lower

than that of a nonzoomed picture.

Adjust colour

Default image name— Set a name for the pictures taken.

For example, if you set Beach as the default name, Camera

will name the pictures you take Beach, Beach(001),

Beach(002), and so on, until you change the setting again.

To enable the camera to reproduce colours more

accurately, or to add effects to your pictures or videos,

select Options > Adjust, and select from the following

options:

Show captured img.—Select Yes if you want to see the

captured image after it is taken, or No if you want to

continue taking pictures immediately.

White balance—Select the current lighting condition from

the list. This allows the camera to reproduce colours more

accurately.

Memory in use—Select where to store your images.

Colour tone—Select a colour effect from the list.

Viewfinder

Tips on taking good photographs

Viewfinder shows the following:

Picture quality

The Memory in use indicator (1) shows where the images

Use the appropriate picture quality. The camera has

three picture quality modes ( High, Normal, and Basic).

Use the High setting to make sure that the camera

produces the best picture quality available. Note however,

that better picture quality requires more storage space. For

MMS and e-mail attachments it may be necessary to use

Normal, or Basic setting. You can define the quality in

Options > Settings.

are currently stored: in device memory

or in hard drive

The images counter (2) on top of the viewfinder shows an

estimate of how many images, depending on the selected

image quality, can fit in the remaining memory of your

device.

—The zoom indicator

(3) shows the zoom

level. Move the

Background

Use a simple background. For portraits and other pictures

with people, avoid having your subject in front of a

cluttered, complex background that may distract attention

from the subject. Move the camera, or the subject, when

these conditions cannot be met. Move the camera closer to

the object to take clearer portraits.

joystick up and down

to zoom in and zoom

out.

—The Night mode

indicator (4) shows that the

camera has been optimized

for low-light photography.

Depth

When shooting landscapes and sceneries, add depth to

your pictures by placing objects in the foreground. If the

foreground object is too close to the camera, it may be

blurred.

—The Sequence mode

indicator (5) shows that the camera is in sequence mode.

—The self-timer indicator (6) shows that the self-timer

is activated. See ‘You in the picture—self-timer’, p. 55.

To adjust colour before recording a video, select Options

> Adjust > White balance or Colour tone. See ‘Adjust

colour’, p. 55.

Lighting conditions

Changing the source, amount, and direction of light can

change photographs dramatically. Here are some typical

lighting conditions:

• Light source behind the subject. Avoid placing your

subject in front of a strong light source. If the light

source is behind the subject or visible in the display, the

resulting picture may have weak contrast, may be too

dark, and may contain unwanted light effects.

• Sidelit subject. Strong side light gives a dramatic

effect but may be too harsh, resulting in too much

contrast.

1 Press the joystick to start recording. The red record

icon

is shown and a tone sounds, indicating to the

subject that video is being recorded.

2 To pause recording at any time, select Pause. The pause

icon

blinks on the display. Video recording

automatically stops if the recording is set to pause and

there are no key presses within a minute.

3 Select Continue to resume recording.

4 Select Stop to stop recording. The video clip is

automatically saved to the Video clips folder of

Gallery. See ‘Gallery’, p. 58.

• Light source in front of the subject. Harsh sunlight

may cause the subjects to squint their eyes. The

contrast may also be too high.

Viewfinder indicators show the following:

• Optimal lighting is found in situations where there is

plenty of diffused, soft light available, for example, on

a bright, partially cloudy day or on a sunny day in the

shadow of trees.

—The microphone indicator shows that the microphone

is muted.

—The zoom indicator shows the zoom level. Move the

joystick up and down to zoom in and out.

Record videos

To activate the camera, Press , and select Camera. The

After a video clip is recorded:

camera starts, and you can see the view to be captured.

•

To immediately play the video clip you just recorded,

select Options > Play.

If the camera is in Image mode, open the video recorder

view by moving the joystick right.

•

To discard the video, select Options > Delete.

•

To return to the viewfinder to record a new video,

press the joystick.

To send the video, select Options > Send > Via

multimedia, Via e-mail, or Via Bluetooth. For more

information, see ‘Messaging’, p. 38 and ‘Bluetooth

connectivity’, p. 90.

video clips you take Beach, Beach(01), Beach(02), and so

on, until you change the setting again.

Gallery

•

To send a video clip to the other party during an active

call, select Options > Send MMS.

To store and organise your images, video clips, sound clips,

playlists, and streaming links, press

> Gallery. To open the gallery in the camcorder select

Options > Go to Gallery.

, and select Media

Video settings

There are two kinds of settings for the video recorder:

temporary settings and default settings. To adjust

contrast, brightness and colour settings, see ‘Adjust

colour’, p. 55. The temporaray settings return to the

default settings after you close the camera, but the

default settings remain the same until you change them

again. To change the default settings, select Options >

Settings and from the following:

Select Images, Video clips, Tracks, Sound clips,

Streaming links, or All files, and press the joystick to open

it.

You can browse and open folders, and mark, copy, and

move items to folders. You can also create folders, and

mark, copy, and add items to folders. See ‘Folders’, p. 59.

Tip! You can transfer images from your device to a

compatible PC with Nokia Phone Browser available in

Nokia PC Suite. See the CD-ROM supplied with your

device.

Length—To optimize video clip for MMS, select Short.

Video resolution—High(CIF, 352x288), Normal(QCIF

176x144), or Basic (SubQCIF 128x96). The higher the

resolution, the more memory the video consumes.

Press the joystick to open a file. Video clips, .ram files, and

streaming links are opened and played in the RealPlayer

application and sound clips in the Music Player

application. For more information, see ‘RealPlayer™’, p. 60,

‘Music player‘, p.18. and ‘View images and video clips’, p.

59.

Default video name:—Set a name for the video taken.

Select Date or Text. If you select Text, the videos are

named in the format Video by default. For example, if you

set Beach as the default name, Camera will name the

To rename a file, select a file and Options > Rename.

select the Presentations folder, scroll to an image, and

select Options > Play.

To download files into Gallery in one of the main folders

using the browser, select Graphic downl. or Video downl.,

Track downl., or Sound downl.. The browser opens, and

you can select a bookmark from which the site can

download.

To zoom in, press . To zoom out, press

To switch between full screen and normal screen, press *.

Folders

With folders you can conveniently manage your images

and video clips.

View images and video clips

Photos taken are stored in the Images folder and video

clips are stored in the Video clips folder in Gallery. Images

and video clips can also be sent to you in a multimedia

message, as an e-mail attachment, or through a Bluetooth

connection. To be able to view a received image or video

clip in the gallery or in the media player, you must save it.

To create a new folder, select Options > Organise > New

folder. Enter a name for the folder, and select OK.

To add a picture or a video clip to an folder in the gallery,

scroll to a picture or video clip, and select Options >

Organise > Copy to hard drive / Copy to phone mem. or

Move to hard drive / Move to phone mem. depending on

the current location of the file. A list of folders opens.

Select the folder to which you want to add the picture or

video clip, and press the joystick.

Open the Images or Video clips folder in Gallery. To

browse the files, scroll up or down and press the joystick to

open a file for viewing.

To delete an image or a video clip, press

To remove a file from an folder, press

Presentations

Music player

See ‘Music player’ on p.18 for details.

With presentations, you can view SVG (scalable vector

graphics) files, such as cartoons and maps. SVG images

maintain their appearance when printed or viewed with

different screen sizes and resolutions. To view SVG files,

Stream content over the air

Many service providers require you to use an Internet

access point (IAP) for your default access point. Other

service providers allow you to use a WAP access point.

RealPlayer™

Press

, and select Media > RealPlayer. With

RealPlayer, you can play video clips or stream media files

over the air. You can activate a streaming link when you

browse Web pages or store it in the hard drive.

The access points may be configured when you first start

your device.

Contact your service provider for more information.

RealPlayer supports files with extensions such as .awb or

.m4a, but not all the variations of file formats. For

example, some .mp4 files may include content that is not

compliant with 3GPP standards and, therefore, cannot be

opened.

In RealPlayer, you can only open an rtsp:// URL address.

However, RealPlayer will recognise an http link to a .ram

file.

To stream content over the air, select a streaming link

saved in Gallery, on a Web page, or received in a text

message or multimedia message. Before live content

begins streaming, your device connects to the site and

starts loading the content. The content is not saved in your

device.

Tip! You can transfer music files from your device to

your hard drive with Nokia PC Suite. See the CD-ROM

supplied with your device.

Play video

1 To play a media file stored in phone memory, or on the

hard drive, select Options > Open and select:

Most recent clips—To play one of the last six files

played in RealPlayer.

Receive RealPlayer settings

You may receive RealPlayer settings in a special text

message from the network operator or service provider.

See ‘Data and settings’, p. 44. For more information,

contact your network operator or service provider.

Saved clip—To play a file saved in Gallery. See

‘Gallery’, p. 58.

2 Scroll to a file, and press the joystick to play the file.

Change the RealPlayer settings

Select Options > Settings and from the following:

Tip! To view a video clip in full screen mode, press

. Press again to change back to normal screen mode.

Video—To adjust the contrast of the video and to have

RealPlayer automatically repeat video clips after they

finish playing.

playing through a network link, select User defined,

and press the joystick. Enter the time, and select OK.

• Lowest UDP port—Enter the lowest port number of the

servers port range. The minimum value is 6970.

• Highest UDP port—Enter the highest port number of

the servers port range. The maximum value is 32000.

Select Options > Advanced settings to edit the

bandwidth values for different networks.

Connection—To select whether to use a proxy server,

change the default access point, and set the port range

used when connecting. Contact your service provider for

the correct settings.

Proxy sett.:

• Use proxy—Select Yes.

FlashPlayer

With Flash player, you can view, play, and

interact with flash files made for mobile

devices.

• Proxy serv. address—Enter the IP address of the proxy

server.

• Proxy port number—Enter the port number of the

proxy server.

Glossary: Proxy servers are intermediate servers between

media servers and their users. Some service providers

use them to provide additional security or speed up

access to browser pages that contain sound or video

clips.

Organise flash files

Press

, and select Media >Flash Player. Scroll right.

To open a folder or play a flash file, scroll to it, and press

the joystick.

Netw. sett.:

To copy a flash file to another folder, select Options >

Organise > Copy to folder.

• Default access point—Scroll to the access point you

want to use to connect to the Internet, and press the

joystick.

To move a flash file to another folder, select Options >

Organise > Move to folder

• Online time—Set the time for RealPlayer to disconnect

To create a folder to organize your flash files, select

Options > Organise > New folder.

from the network when you have paused a media clip

The available options may vary.

To delete a flash file, scroll to it, and press

Recorder

Play flash files

Press

, and select Media >Flash Player. Scroll to a

Press

, and select Media > Recorder to record

flash file and press the joystick.

telephone conversations and voice memos. If you are

recording a telephone conversation, both parties hear a

tone every 5 seconds during recording.

Select Options and from the following:

Note: Options may not be available in all flash files.

The recorder cannot be used when a data call or GPRS

connection is active.

• Pause to pause the playback.

• Stop to stop the playback.

• Volume to adjust the playback volume. To increase or

decrease the volume use the side volume key on the

left side of the device.

• Quality to select the playback quality.

If the playback appears uneven and slow, change the

Quality setting to Normal or Low.

• Full screen to play the file using the entire display. To

return to the normal screen, select Normal screen.

Even though not visible in full screen, the key

functions may still be available when you press either

key below the display.

Radio

Press

, and select Media > Radio. You can use the

application as a traditional FM radio with automatic

tuning and saved stations, or with parallel visual

information related to the radio program on the display, if

you tune to stations that offer Visual Radio service. The

Visual Radio service uses packet data (network service).

You can listen to the FM radio while using other

applications.

• Fit to screen to play the file in its original size after

zooming it.

If you do not have access to the Visual Radio service, the

operators and radio stations in your area do not necessarily

• Pan mode on to be able to move around the display

with the joystick when you have zoomed in.

support Visual Radio. The Visual Radio service may not be

available in all areas and countries.

or previous saved station, or press the corresponding

number key to select the memory location of a station.

You can normally make a call or answer an incoming call

while listening to the radio. The radio is muted when there

is an active call.

To adjust the volume, press and hold

side of the device. To listen to the radio using the

loudspeaker, select Options > Activate loudspeaker.

on the left

The radio selects the used frequency band based on the

country information received from the network. If this

information is not available, you may be asked to select the

region where you are located, or you can select the region

in the Visual Radio settings.

To view available stations based on location, select

Options > Station directory (network service).

To save the current tuned station to your station list,

select Options > Save station. To open the list of your

saved stations, select Options > Stations.

To return to the standby mode and leave the FM radio

playing in the background, select Options > Play in

background.

Listen to the radio

Note that the quality of the radio broadcast depends on

the coverage of the radio station in that particular area.

View visual content

To check availability and costs and to subscribe to the

service, contact your network operator or service provider.

The FM radio depends on an antenna other than the

wireless device antenna. A compatible headset or

enhancement needs to be attached to the device for the

FM radio to function properly.

To view available visual content for a tuned station, select

or Options > Start visual service. If the visual

service ID has not been saved for the station, enter it, or

select Retrieve to search for it in the station directory

(network service).

Press

search, select

, and select Media > Radio. To start a station

or and press the joystick. To

change the frequency manually, select Options > Manual

tuning.

If you have previously saved radio stations, select

When the connection to the visual service is established,

the display shows the current visual content.

on the display and press the joystick to go to the next

To adjust display settings for the visual content view,

select Options > Display settings.

Current region—Select the region you are currently

located in. This setting is displayed only if there was no

network coverage when the application was started.

Saved stations

You can save up to 20 radio stations in the radio. To open

your station list, select Options > Stations.

To listen to a saved station, select Options > Station >

Listen. To view available visual content for a station with

Visual Radio service, select Options > Station > Start

visual service.

To change station details, select Options > Station >

Edit.

Settings

Select Options > Settings and from the following:

Start-up tone—Select whether a tone is played when the

application is started.

Auto-start service—Select Yes to have the Visual Radio

service start automatically when you select a saved

station that offers visual service.

Access point—Select the access point used for the data

connection. You do not need an access point to use the

application as an ordinary FM radio.

My own

message from the network operator or service provider

that offers the IM service. See ‘Data and settings’, p. 44.

You can also enter the settings manually. See ‘IM server

settings’, p. 69.

IM—instant messaging

(chat)

Press

, and select My Own > IM.

Instant messaging (network service) allows you to

converse with other people using instant messages and

join discussion forums (IM groups) with specific topics.

Various service providers maintain IM servers that you can

providers may differ in their support of features.

Connect to an IM server

1 To connect to the IM server in use, open IM, and select

Options > Login. To change the IM server in use and

save new IM servers, see ‘IM server settings’, p. 69.

2 Enter your user ID and password, and press the joystick

to log in. You obtain the user ID and password for the

IM server from your service provider.

Select Conversations to start or continue a conversation

with an IM user; IM contacts to create, edit, or view the

online status of your IM contacts; IM groups to start or

continue a group conversation with multiple IM users; or

Record. chats to view a previous instant messaging

session that you saved.

3 To log out, select Options > Logout.

Modify your IM settings

Select Options > Settings > IM settings and from the

following:

Check the availability of services, pricing, instructions, and

fees with your network operator or service provider.

Use screen name (shown only if IM groups are supported

by the server)—To enter a nickname, select Yes.

Receive IM settings

You must save the settings to access the service that you

want to use. You may receive the settings in a special text

Allow messages from—To allow messages from all, select

All.

Allow invitations from—To allow invitations only from

your IM contacts, select IM contacts only. IM invitations

To search for users, in the IM contacts view, select

Options > New IM contact > Search from server. You

are sent by IM contacts who want you to join their groups. can search by User's name, User ID, Phone number, and

E-mail address.

Msg. scrolling speed—Select the speed at which new

messages are displayed.

Join IM groups

The IM groups view shows a list of the IM groups that you

have saved or are currently joined to.

Sort IM contacts—Select how your IM contacts are

sorted: Alphabetically or By online status.

Availabil. reloading—To select how to update

information about whether your IM contacts are online or

offline, select Automatic or Manual.

To join a saved IM group, press the joystick.

To join an IM group that is not on the list, but for which

you know the group ID, select Options > Join new group.

Offline contacts—Select whether IM contacts with an

offline status are shown in the IM contacts list.

To leave the IM group, select Options > Leave IM group.

Own message colour—Select the color of the instant

messages you send.

Chat

Received msg colour—Select the color of the instant

messages you receive.

After you join an IM group, you can view the messages that

are exchanged there, and send your own messages.

IM alert tone—Change the tone played when you receive

a new instant message.

To send a message, write the message in the message

editor field, and press the joystick.

To send a private message to a participant, select

Options > Send private msg..

Search for IM groups and users

To search for groups, in the IM groups view, select

Options > Search. You can search by Group name, Topic,

and Members (user ID).

To reply to a private message sent to you, select the

message and Options > Reply.

To invite IM contacts who are online to join the IM group,

select Options > Send invitation.

To prevent receiving messages from certain participants,

To save a conversation participant to your IM contacts,

select Options > Blocking options and the desired option. select Options > Add to IM contacts.

To send automatic replies to incoming messages, select

Options > Set auto reply on. You can still receive

messages.

Record chats

To record the messages that are exchanged during a

conversation or while you are joined in a IM group, select

Options > Record chat. To stop recording, select

Options > Stop recording. To view the recorded chats, in

the main view, select Record. chats.

IM contacts

In the IM contacts view, you can retrieve IM contact lists

from the server, or add a new IM contact to a contact list.

When you log in to the server, the previously used IM

contact list is retrieved from the server automatically.

View and start conversations

The Conversations view shows a list of the individual

conversation participants that you have an ongoing

conversation with. Ongoing conversations are

automatically closed when you exit IM.

To create a new contact, select Options > New IM

contact > Enter manually. Fill in the Nickname and User

ID fields, and select Done.

To move a contact from a list on the server to the retrieved

list, select Options > New IM contact > Move from

other list.

To view a conversation, scroll to a participant, and press

the joystick.

To continue the conversation, write your message, and

press the joystick.

To change the IM contact list, select Options > Change

contact list.

To return to the conversations list without closing the

conversation, select Back. To close the conversation, select

Options > End conversation.

Select from the following options:

Open conversation—To start a new conversation or

continue an ongoing conversation with the contact.

To start a new conversation, select Options > New

conversation.

Switch tracking on—To have the device notify you every

time the IM contact goes online or offline.

Belongs to groups—To see which groups the IM contact

Create a new IM group

Select IM groups > Options > Create new group. Enter

the settings for the group.

has joined.

Reload users' availab.—To update information about

whether the contact is online or offline. The online status

is shown by an indicator next to the contact name. This

option is not available if you have set the Availabil.

reloading to Automatic in IM settings.

You can edit the settings for an IM group if you have

administrator rights to the group. The user who creates a

group is automatically given administrator rights to it.

Group name, Group topic, and Welcome note—To add

details that the participants see when they join the group.

Manage IM groups

Select IM groups view to see a list of the IM groups that

you have either saved or are currently joined to.

Group size—To define the maximum number of members

allowed to join the group.

Allow search—To define if others can find the IM group by

searching.

Scroll to a group, select Options > Group and one of the

following:

Editing rights—To define the IM group participants to

whom you want to give rights to invite contacts to join the

IM group and edit the group settings.

Save—To save an unsaved group that you are currently

joined to.

View participants—To see who is currently joined to the

group.

Group members—See ‘Add and remove group members’, p.

69.

Details—To see the group ID, topic, participants,

administrators of the group (shown only if you have the

editing rights), the list of blocked participants (shown only

if you have the editing rights), and whether private

conversations are allowed in the group.

Banned list—Enter the participants that are not allowed to

join the IM group.

Allow private msgs.—To allow messaging between

selected participants only.

Group ID—The group ID is created automatically and

cannot be changed.

Settings—To view and edit the IM group settings. See

‘Create a new IM group’, p 68.

Server name—the name for the IM server

Add and remove group members

To add members to a group, select IM groups, scroll to an

IM group, and select Options > Group > Settings > Group

members > Selected only or All.

Access point in use—the access point you want to use for

the server

Web address—the URL address of the IM server

User ID—your user ID

To remove a member from the IM group, scroll to the

member, and select Options > Remove. To remove all

members, select Options > Remove all.

Password—your login password

IM server settings

Push to talk (network

service)

Push to talk (PTT) is a real-time voice over IP service

implemented over a GSM/GPRS network. Push to talk

provides direct voice communication connected with the

push of a key. Use push to talk to have a conversation with

one person or with a group of people.

Select Options > Settings > Server settings. You may

receive the settings in a special text message from the

network operator or service provider that offers the chat

service. You obtain the user ID and password from your

service provider when you register to the service. If you do

not know your user ID or password, contact your service

provider.

Before you can use push to talk, you must define the

push-to-talk access point and push-to-talk settings. You

may receive the settings in a special text message from

the service provider that offers the push-to-talk service.

Servers—View a list of all defined IM servers.

Default server—Change the IM server to which you want

to connect.

IM login type—To log in automatically when you start IM,

Press

, and select My Own > Push to talk.

select On app. start-up.

In push-to-talk communication, one person talks while

the others listen through the built-in loudspeaker.

Speakers take turns responding to each other. Because

only one group member can talk at any time, the

To add a new server to your list of IM servers, select

Servers > Options > New server. Enter the following

settings:

maximum duration of a speech turn is limited. The

maximum duration is usually set to 30 seconds. For details

of the speech turn duration for your network, contact your

network operator or service provider.

Incoming PTT calls—Select Notify if you want to see a

notification of incoming calls. Select Auto-accept if you

want PTT calls to be answered automatically. Select Not

allowed if you want PTT calls to be rejected automatically.

Warning: Be sure to hold the device in front of you

and not to your ear. The loudspeaker is used to listen.

Continuous exposure to high volume may damage your

hearing.

PTT call alert tone—Select Set by profile if you want the

incoming call alert setting for push to talk to follow your

profile settings. For example, if your profile is silent, push

to talk is set to do not disturb (DND) and, except for

callback requests, you are not available to others using

push to talk.

Phone calls always take priority over push-to-talk

activities.

Callback request tone—Select a tone for callback

requests.

Define a push-to-talk access point

Application start-up—Select if you want to log in to the

Many service providers require you to use an Internet

access point (IAP) for your default access point. Other

service providers allow you to use a WAP access point.

Contact your service provider for more information.

Push-to-talk service when you switch on your device.

Default nickname—Enter your default nickname (20

characters maximum) that is displayed to other users. Your

service provider may have disabled this option in your

device. For more information, contact your network

operator or service provider.

If you do not have a WAP connection, you may need to

contact your service provider for assistance with the

first-time connection or visit

www.nokia.com/phonesettings.

Show my PTT address—Select In 1 to 1 calls, In group

calls, In all calls, or Never. Your service provider may have

disabled this option in your device. For more information,

contact your network operator or service provider.

Push-to-talk settings

Press

, and select My Own > Push to talk >

Show my login status—Select Yes whether you want your

status to be shown or No if you want your status to be

hidden.

Options > Settings. Enter the following information:

User settings:

Connection settings:

Exit push to talk

Domain—Enter the domain name obtained from your

service provider.

Select Options > Exit. Switch Push to talk off after

exiting application? is displayed. Select Yes to keep the

application active on the background or No to log out and

close the service.

Access point name—Enter the push-to-talk access point

name. The access point name is needed to establish a

connection to the GSM/GPRS network.

If several applications are open and you want to switch

Server address—Enter the IP address or domain name of

the push-to-talk server obtained from your service

provider.

from one application to another, press and hold

Make a one-to-one call

Select Options > PTT contacts.

User name—Enter your user name obtained from your

service provider.

Scroll to the contact you want to talk to from the list and

select Options > Talk 1 to 1.

Password—Enter a password, if required, to make a data

connection. The password is usually provided by the service

provider and is often case-sensitive.

Press and hold

the entire time you are talking. When

you have finished talking, release

You must end the one-to-one call before you can create a

new call. Select Disconnect or press

Press

, and select My Own > Push to talk. Push to talk

Tip! Remember to hold the device in front of you

during a push-to-talk call so you can see the display.

Speak towards the microphone, and do not cover the

loudspeaker with your hands.

automatically logs in to the service when started.

When log in is successful, push to talk automatically

connects to groups that were active when the application

was last closed. If the connection is lost, the device

automatically tries to log back in until you choose to exit

push to talk.

Answer a one-to-one call

Press

to start a one-to-one call or

to dismiss

the call.

Tip! You can make a one-to-one or group call also

from Contacts. Select Options > Talk 1 to 1 or Make

PTT group call.

Channels

You can join public preconfigured channels. Public

channels are open to anyone who knows the URL for the

channel.

Make a group call

To call a group, select Options > PTT contacts, select

When you are connected to a channel and talk, all

members joined to the channel hear you talking. Up to five

channels can be active at the same time. When more than

one channel is active, use Swap to change the channel you

want to talk to.

Options > Make PTT group call, mark the contacts you

want to call, and press

Select Options > PTT channels.

Subscribe login status of others

To subscribe or unsubscribe to the push-to-talk login

status of others, select Options > PTT contacts, select the

contact, select Options > Show login statusor Hide login

status.

To connect to a public preconfigured channel for the first

time, select Options > New channel > Add existing.

When you join a preconfigured channel, you must fill in an

URL for the channel.

Create your own channels

To create a new preconfigured channel select Options >

New channel > Create new.

Send a callback request

In PTT contacts, scroll to the desired name, and select

Options > Send callback request.

You can create your own public channels, choose your own

channel name, and invite members. Those members can

invite more members to the public channel.

Respond to a callback request

When someone sends you a callback request, 1 new

callback request is displayed in standby mode. Press

Show to open Callback inbox. Select a contact and select

Options > Talk 1 to 1 to start a one-to-one call.

You may also set up private channels. Only users invited by

the host are allowed to join and use private channels.

For each channel, define the following: Channel name,

Channel privacy, Nickname in channel, and Channel

thumbnail (optional).

You can also invite new members to a channel when you

are connected to it, select Options > Send invitation to

open the invitation view. You can only invite new

members when you are the host of a private channel, or

when the channel is a public channel. Channel invitations

are text messages.

When you have successfully created a channel, you are

asked if you want to send channel invitations. Channel

invitations are text messages.

Talking to a channel

To talk to a channel after you log in to the push-to-talk

Respond to a channel invitation

To save a received channel invitation, select Options >

Save PTT channel. The channel is added to your PTT

contacts, channels view.

service, press

is granted.

. You hear a tone indicating that access

Continue to press and hold

talking. When you finish talking, release

the entire time you are

After you save the channel invitation, you are asked if you

want to connect to the channel. Select Yes to open the

push-to-talk sessions view. Your device logs in to the

service, if you are not logged in already.

If you try to respond to a channel by pressing

while

another member is talking, Wait is displayed. Release

, wait for the other person to finish talking, and press

again when the speaker has finished. Alternatively,

If you reject or clear the invitation, the invitation is stored

in your messaging inbox. To join the channel later, open

the invitation message, and accept.

keep

pressed and wait for Talk to be displayed.

When you are talking in a channel, the first person to press

when someone stops talking talks next.

View the push-to-talk log

When you have finished the push-to-talk call, select

Press

, and select My Own > Push to talk > Options >

Disconnect or press

PTT log. The log contains the following folders: Missed

calls, Received calls, and Created calls.

To view currently active members of a channel when you

have an active call to the channel, select Options > Active

members.

You can initiate a one-to-one call from PTT log by

Call duration

To monitor the approximate duration of your incoming and

pressing

outgoing calls, press

, and select Log > Call duration.

Log

To set the display of the call duration while a call is active,

select My Own > Log > Options > Settings > Show call

duration. Select Yes or No.

Recent calls

To monitor the phone numbers of missed, received, and

Note: The actual time invoiced for calls by your

service provider may vary, depending on network

features, rounding off for billing, and so forth.

dialled calls, press

, and select My Own > Log >

Recent calls. The device registers missed and received

calls only if the network supports these functions, the

device is switched on, and within the network service

area.

To clear call duration timers, select Options > Clear

timers. For this you need the lock code, see ‘Security’,

‘Phone and SIM’, p. 107.

Packet data

To check the amount of data sent and received during

Tip! When you see a note in the standby mode about

missed calls, select Show to access the list of missed

calls. To call back, scroll to a name or number, and

packet data connections, press

, and select My

press

Own >Log > Packet data. For example, you may be

charged for your packet data connections by the amount

of data sent and received.

To clear all recent call lists, select Options > Clear recent

calls in the recent calls main view. To clear one of the call

registers, open the register you want to erase, and select

Options > Clear list. To clear an individual event, open a

Monitor all communication events

Icons in Log:

Incoming

Outgoing

Missed communication events

To monitor all voice calls, text messages, or data

contents, recent calls register, and messaging delivery

reports are permanently deleted.

connections registered by the device, press

, select My

Own > Log, and scroll right to open the general log. For

each communication event, you can see the sender or

recipient name, phone number, name of the service

provider, or access point. You can filter the general log to

view just one type of event and create new contact cards

based on the log information.

To view the details of a communication event, in the

general log view scroll to an event, and press the joystick.

Tip! In the details view you can copy a phone number

to the clipboard, and paste it to a text message, for

example. Select Options > Copy Number.

Packet data counter and connection timer: To view how

much data, measured in kilobytes, is transferred and how

long a certain packet data connection lasts, scroll to an

incoming or outgoing event indicated by Pack., and select

Options > View details.

Tip! If you want to see the duration of a voice call on

the main display during an active call, select Options >

Settings > Show call duration > Yes.

Tip! To view a list of sent messages, press

, and

select Messaging > Sent.

Subevents, such as a text message sent in more than one

part and packet data connections, are logged as one

communication event. Connections to your mailbox,

multimedia messaging centre, or Web pages are shown as

packet data connections.

Nokia Lifeblog

Nokia Lifeblog multimedia diary is a combination of

software for the mobile phone and PC that keeps a

multimedia diary of the items that you collect with your

device. Nokia Lifeblog multimedia diary automatically

organizes your photos, videos, sounds, text messages,

multimedia messages, and weblog posts into a chronology

that you can browse, search, share, publish, and back up.

Both Lifeblog PC and Lifeblog mobile let you send or blog

your items for others to see.

To filter the log, select Options > Filter and a filter.

To erase the contents of the log, recent calls register, and

messaging delivery reports permanently, select Options >

Clear log. Select Yes to confirm.

To set the Log duration, select Options > Settings > Log

duration. The log events remain in the phone memory for

a set number of days after which they are automatically

erased to free memory. If you select No log, all the log

Lifeblog mobile automatically keeps track of your

multimedia items. Use Lifeblog mobile on your device to

browse your items, send them to others, or publish them

on the Web. Connect your device to a compatible PC using

a USB data cable or Bluetooth connectivity to transfer and

synchronize the items on the device with your compatible

PC.

•

1 GHz Intel Pentium or equivalent, 128 MB RAM

400 MB of available hard disk space (if Microsoft

DirectX and Nokia PC Suite must be installed)

Graphics capability of 1024x768 and 24-bit color

32 MB graphics card

•

Microsoft Windows 2000 or Windows XP

To install Nokia Lifeblog on your PC:

Lifeblog PC provides easy browsing and searching of the

items that you collected with your device. With

one-button transfer using a USB data cable or Bluetooth

connectivity, your favorite photos, videos, text, and

multimedia messages are transferred back to your device.

1 Insert the CD-ROM.

2 Install Nokia PC Suite (includes Nokia Connectivity

Cable Drivers for USB connection).

3 Install Nokia Lifeblog for PC.

If Microsoft DirectX 9.0 is not already installed on your PC,

it is installed at the same time with Lifeblog PC.

For safekeeping, you can back up your Lifeblog database

using your hard disk, CDs, DVDs, removable drive, or

network drive. Additionally, you can post items to your

weblog (blog).

Connect your device and your PC

To connect your device and a compatible PC using the USB

data cable supplied with your device:

This application is only available in a limited number of

languages.

1 Ensure that you have installed Nokia PC Suite.

2 Connect the USB data cable to the device and the PC.

When you connect your device to the PC for the first

time after you have installed Nokia PC Suite, the PC

installs the specific driver for your device. This may take

a while.

To start Lifeblog mobile on your device, press

select

My own > Lifeblog > Options > Open.

, and

Installation on your PC

Before you install Lifeblog PC on a compatible PC, you

need the following:

3 Start the Lifeblog PC application.

To connect your device and a compatible PC using

Bluetooth wireless technology:

Post to the Web

To share your best Nokia Lifeblog items, send them to your

weblog on the Internet for others to see.

1 Ensure that you have installed Nokia PC Suite on your

PC.

2 Ensure that you have paired your device and the PC

through Bluetooth wireless technology with Get

Connected in Nokia PC Suite. See Nokia PC Suite user

guide and “Bluetooth connectivity”, p. 90.

3 Activate Bluetooth connectivity on your device and on

your PC.

You must first create an account with a weblog service,

create one or more weblogs that you use as the

destination of your posts, and add the weblog account to

Nokia Lifeblog multimedia diary. The recommended

weblog service for Nokia Lifeblog is TypePad from Six

Apart, www.typepad.com.

On your device, add the weblog account in Lifeblog mobile

in the weblog settings. On your PC, edit accounts in the

Edit log accounts window.

Copy items

When you have connected your device to a compatible PC

using a USB data cable or Bluetooth connectivity, you can

copy your items between your device and your PC.

To post items to the Web from your device:

1 In Timeline or Favourites, select the items that you

want to post to the Web.

2 Select Options > Post to Web.

To copy new or edited items from your device to your PC,

and copy the selected items from your PC to your device:

3 If you use the feature for the first time, Lifeblog mobile

retrieves a weblog list from the weblog server.

4 The weblog post dialog opens. Select the weblog you

want to use from the Post to: list. If you have created

new weblogs, to update the weblog list, select

Options > Refresh blog list.

5 Enter a title and a caption for the post. You can also

write a longer story or description in the body text

field.

1 Start the Lifeblog PC application.

2 In the Nokia Lifeblog PC application, select File > Copy

from phone and to Phone.

The new items from your device are copied to your PC. The

items in the To phone view on your PC are copied to your

device.

6 When everything is ready, select Options > Send.

To post items to the Web from your PC:

3 Select a folder, file, or several files. You can view their

content in the Preview: pane.

1 In Timeline or Favourites, select the items (a

maximum of 50) that you want to post to the Web.

2 Select File > Post to the Web.... The Post to the Web

window opens.

4 Click Open to import the folder (including subfolders)

or selected files.

Browse timeline and favourites

3 Enter a title and a caption for the post. You can also

write a longer story or description in the body text

field.

When you start Lifeblog PC, you have several ways to move

around in the Timeline and Favourites views. The fastest

way is to grab the slider handle and move it forward or

backward, fast or slow. Alternatively, click the time bar to

select a date, use the Go to date... feature, or use the

arrow keys.

4 Select the weblog that you want to use from the Post

to: list.

5 When everything is ready, click the Send button.

Import items from other sources

More information

In addition to the .jpeg images of your imaging device, you

can also import .jpeg images and .3gp and .mp4 video

clips, .arm sound files, and .txt text files from other

sources (such as a CD, DVD, or folders on your hard disk)

into Nokia Lifeblog multimedia diary.

For more information on weblog services and their

compatibility with Nokia Lifeblog multimedia diary, visit

www.nokia.com/lifeblog, or press F1 in Lifeblog PC to

open Nokia Lifeblog Help.

To import images or videos from a compatible PC to

Lifeblog PC:

1 In Timeline or Favourites, select File > Import from

PC.... The Import window opens.

2 Browse the list to find the image or video file, or sound

or text file from the list, or navigate to other folders to

find the file that you want to import. Use the Look in

list to browse other drives or appliances.

Calendar

Tip! Regularly back up the phone information with

Nokia PC Suite. You can restore the information, such

as calendar entries, to the phone later.

Repeat—Scroll right to change the entry to be

repeating ( is shown in the day view).

Repeat until—You can set an end date for the repeated

entry.

Synchronisation:

Create calendar entries

Private—After synchronisation the calendar entry can

be seen only by you and it will not be shown to others

with online access to view the calendar.

Public—The calendar entry is shown to others who

have access to view your calendar online.

None—The calendar entry will not be copied to your PC

when you synchronise.

Shortcut: In the day, week, or month calendar view,

press any key (

—

). An appointment entry opens,

and the characters you enter are added to the Subject

field. In the to-do view, a to-do note entry opens.

Press

, and select My own > Calendar > Options

> New entry and one of the following:

Meeting—To remind you of an appointment that has a

specific date and time.

3 To save the entry, select Done.

When the calendar alarms for a note, select Silence to

turn off the calendar alarm tone. The reminder text stays

on the screen. To end the calendar alarm, select Stop. To

set the alarm to snooze, select Snooze.

Memo—To write a general entry for a day.

Anniversary—To remind you of birthdays or special

dates. Anniversary entries are repeated every year.

To-do—to remind you of a task that needs doing by a

specific date

To send a calendar note to a compatible phone, select

Options > Send > Via text message, Via multimedia, Via

e-mail, or Via Bluetooth.

2 Fill in the fields.

Alarm (meetings, to-dos, and anniversaries)—Select

On, and scroll down to fill in the Alarm time and Alarm

Tip! You can move calendar and to-do data from

many different Nokia phones to your phone or

synchronise your calendar and to-do to a compatible

date fields.

in the day view indicates an alarm.

PC using Nokia PC Suite. See the CD-ROM supplied

with the phone.

before 8 o’clock. Press

view, the week view, the day view, and the to-do view.

to switch between the month

Icons in the day view:

Set a calendar alarm

You can set an alarm to remind you of meetings and

anniversaries.

Memo

Anniversary

There is no icon for Meeting.

To go to a certain date, select Options > Go to date, write

the date, and select OK.

1 Open an entry in which you want to set an alarm, and

select Alarm > On.

2 Set the Alarm time and Alarm date.

3 Scroll down to Repeat, and scroll right to select how

often you want the alarm to be repeated.

4 Select Done.

Press

to jump to today.

To-do view

Press

do view to write notes and maintain a task list.

, and select My own > Calendar > Options > To-

To delete a calendar alarm, open the entry in which you

want to delete an alarm, and select Alarm > Off.

To add a note, press any number key to start to write the

task in the Subject field.

Calendar views

To set the due date for the task, scroll to the Due date field,

and enter a date.

Tip! Select Options > Settings to change the

starting day of the week or the view that is shown

when you open the calendar.

To set the priority for the To-do note, scroll to the Priority

field, and scroll right to select the priority. The priority

icons are (High) and (Low). There is no icon for

Normal.

To open Month view or To-do view, select Options >

Month view / To-do view.

In the month view, dates that have calendar entries are

marked with a small triangle at the right bottom corner.

In the week view, memos and anniversaries are placed

To mark a task as completed, scroll to it in the To-do list,

and select Options > Mark as done.

To restore a task, scroll to it in the To-do list, and select

Options > Mark as not done.

Week view title—Select either Week number or Week

dates. If you select any day other than Monday in Week

starts on, the above setting is not available.

To save your settings, press Back.

Remove calendar entries

Removing past entries in Calendar saves space in your

phone memory.

To remove more than one event at a time, go to the month

view, and select Options > Delete entry and one of the

following:

Before date—Deletes all calendar entries that take place

before a certain date you define

All entries—Deletes all calendar entries

Calendar settings

Scroll to the following settings and press the joystick to

edit:

Calendar alarm tone—To change the alarm tone, scroll to

the new tone and press the joystick.

Default view—To change the view that is displayed when

you open Calendar, scroll to the desired view and press the

joystick.

Week starts on—To change the first day of the week, scroll

to the desired day and press the joystick.

Office

Calculator

Converter

To add, substract, multiply, divide, calculate square roots

To convert measures such as Length from one unit (Yards)

and percentages, press

, and select Office >

to another (Metres), press

, and select Office >

Calculator.

Converter.

Note: This calculator has limited accuracy and is

designed for simple calculations.

Note that Converter has limited accuracy, and rounding

errors may occur.

1 Scroll to the Type field, and press the joystick to open

a list of measures. Scroll to the measure you want to

use, and select OK.

2 Scroll to the first Unit field, and press the joystick.

Select the unit from which you want to convert and

OK. Scroll to the next Unit field, and select the unit to

which you want to convert.

3 Scroll to the first Amount field, and enter the value you

want to convert. The other Amount field changes

automatically to show the converted value.

To save a number in the memory (indicated by M), select

Options > Memory > Save. To retrieve a number in

memory, select Options > Memory > Recall. To clear a

number in memory, select Options > Memory > Clear.

Calculate percentages

1 Enter a number for which you want to calculate a

percentage.

2 Select

3 Enter the percentage.

4 Select

, or

Press

to add a decimal and

for the +, - (for

temperature), and E (exponent) symbols.

Tip! To change the conversion order, enter the

value in the second Amount field. The result is

shown in the first Amount field.

Set base currency and exchange rates

Notes

Before you can make currency conversions, you need to

choose a base currency and add exchange rates. The rate

of the base currency is always 1. The base currency

determines the conversion rates of the other currencies.

To write notes, press

can send notes to compatible devices, and save plain text

files (.txt format) that you receive to Notes.

, and select Office > Notes. You

1 Select Converter > Options > Currency rates. A list of

currencies opens, and you can see the current base

currency at the top.

Tip! To rename a currency, go to the currency rates

view, scroll to the currency, and select Options >

Rename currency.

2 To change the base currency, scroll to the currency, and

select Options > Set as base curr..

3 Add exchange rates. Scroll to the currency, and enter a

new rate, that is, how many units of the currency equal

one unit of the base currency you have selected.

After you have inserted all the necessary exchange rates,

you can make currency conversions.

Note: When you change base currency, you must

enter the new rates because all previously set exchange

rates are set to zero.

Internet

Various service providers maintain pages specifically

designed for mobile devices. These pages use the wireless

markup language (WML), extensible hypertext markup

language (XHTML), or hypertext markup language (HTML).

Tip! Settings may be available on the Web site of a

network operator or service provider.

Enter the settings manually

1 Press

, and select Tools > Settings > Connection >

Check the availability of services, pricing, and tariffs with

your network operator or service provider. Service

providers will also give you instructions on how to use

their services.

Access points, and define the settings for an access

point. Follow the instructions given to you by your

service provider. See ‘Connection’, p. 103.

2 Press

, and select Services > Options > Bookmark

manager > Add bookmark. Enter a name for the

bookmark and the address of the page defined for the

current access point.

Services

3 To set the created access point as the default access

point, select Options > Settings > Access point.

Press

, and select Services.

Shortcut: To start a connection, press and hold

in the standby mode.

Bookmarks view

The bookmarks view opens when you open Services.

Access point for Services

Glossary: A bookmark consists of an Internet address

(mandatory), bookmark title, access point, and if the

Web page requires, a user name and password.

To access pages, you need service settings for the page

that you want to use. You may receive the settings in a

special text message from the network operator or service

provider that offers the Web page. See ‘Data and settings’,

p. 44. For more information, contact your network

operator or service provider.

Your device may have some bookmarks loaded for sites not

affiliated with Nokia. Nokia does not warrant or endorse

these sites. If you choose to access them, you should take

the same precautions, for security or content, as you would

with any Internet site.

Make a connection

Once you have stored all the required connection settings,

you can access the pages.

Icons in the bookmark view:

The starting page defined for the default access point.

If you use another default access point for browsing, the

starting page is changed accordingly.

1 Select a bookmark or enter the address in the field

(

). When you enter the address, matching

bookmarks are shown above the field. Scroll up to

select a matching bookmark.

2 Press the joystick to start to download the page.

The automatic bookmarks folder contains bookmarks

(

) that are collected automatically when you browse

pages. The bookmarks in this folder are automatically

organised according to domain.

Connection security

If the security indicator

connection, the data transmission between the device and

the Internet gateway or server is encrypted.

is displayed during a

Any bookmark showing the title or Internet address of

the bookmark.

Add bookmarks manually

The security icon does not indicate that the data

transmission between the gateway and the content server

(or place where the requested resource is stored) is secure.

The service provider secures the data transmission

between the gateway and the content server.

1 In the bookmarks view, select Options > Bookmark

manager > Add bookmark.

2 Start to fill in the fields. Only the URL address must be

defined. The default access point is assigned to the

bookmark if no other one is selected. Press

special characters such as /, ., :, and @. Press

clear characters.

to enter

Select Options > Details > Security to view details about

the connection, encryptions status, and information about

server and user authentication.

3 Select Options > Save to save the bookmark.

Security features may be required for some services, such

as banking services. For such connections you need

security certificates. For more information, contact your

service provider. See also ‘Certificate management’, p.

109.

Send bookmarks

Scroll to a bookmark, and select Options > Send > Via

text message. Press to send. It is possible to send

more than one bookmark at the same time.

To save a page while browsing, select Options > Advanced

options > Save page. You can save pages either to the

device memory or on the hard drive, and browse them

when offline. To access the pages later, scroll right in the

bookmarks view to open the Saved pages view.

Browse

Important:Use only services that you trust and that

offer adequate security and protection against harmful

software.

To download a page, select a bookmark, or enter the

address in the field ( ).

To enter a new URL address, select Options > Navigation

options > Go to web address.

On a browser page, new links appear underlined in blue

and previously visited links in purple. Images that act as

links have a blue border around them.

To open a list of commands or actions specific for the

currently open page, select Options > Service options, if

available.

To open a link, scroll to it, and press the joystick.

You can download files that cannot be shown on the page,

such as ringing tones, images, operator logos, themes, and

video clips. To download an item, scroll to the link, and

press the joystick.

Shortcut: Use

to jump to the end of a page and

to the beginning of a page.

To go to the previous page while browsing, select Back. If

Back is not available, select Options > Navigation

options > Historyto view a chronological list of the pages

you have visited during a browsing session. The history list

is cleared each time a session is closed.

When you start a download, a list of ongoing, paused, and

completed downloads from the current browsing session is

displayed. You can also view the list by selecting Options >

Tools > Downloads. In the list, scroll to an item, and select

Options to pause, resume, or cancel ongoing downloads, or

open, save, or delete completed downloads.

To retrieve the latest content from the server, select

Options > Navigation options > Reload.

Downloaded items are handled by their respective

applications. For example, a downloaded image is saved in

Gallery.

To save a bookmark, select Options > Bookmarks > Save

as bookmark.

Tip! To access the bookmarks view while browsing,

press and hold down the joystick. To return to the

browser view again, select Options > Back to page.

Important: Only install and use applications and

other software from sources that offer adequate security

and protection against harmful software.

Tip! The browser collects bookmarks automatically

Important: Only install and use applications and

other software from sources that offer adequate security

and protection against harmful software.

while you are browsing pages. The bookmarks are

stored to the automatic bookmarks folder (

) and

automatically organized according to domain. See also

‘Settings for Services’, p. 88.

1 To download the item, scroll to the link, and press the

joystick.

2 Select the appropriate option to purchase the item.

3 Carefully read all the information provided.

To continue the download, select Accept. To cancel the

download, select Cancel.

View saved pages

If you regularly browse pages containing information that

does not change very often, you can save and browse them

when offline. In the saved pages view you can also create

folders to store your saved pages.

For information on downloading music, see ‘Go to music

shop’, p. 20.

To open the saved pages view, scroll right in the bookmarks

view. In the saved pages view, press the joystick to open a

(including ringing tones), and other content from being

copied, modified, transferred or forwarded.

saved page (

To save a page while browsing, select Options > Advanced

options > Save page.

End a connection

To start a connection to the browser service and to

download the latest version of the page, select Options >

Reload. The device stays online after you reload the page.

Select Options > Advanced options > Disconnect to end

the connection and view the browser page offline, or to

end the connection and close the browser, select

Options > Exit.

Download and purchase items

Empty the cache

The information or services you have accessed are stored

in the cache memory of the device.

You can download items such as ringing tones, images,

operator logos, themes, and video clips. These items can be

provided free, or you can purchase them. Downloaded

items are handled by their respective applications, for

example, a downloaded photo is saved in Gallery.

A cache is a memory location that is used to store data

temporarily. If you have tried to access or have accessed

confidential information requiring passwords, empty the

cache after each use. The information or services you have

accessed are stored in the cache. To empty the

Default encoding—If text characters are not shown

correctly, you may choose another encoding according to

language.

cache,select Options > Advanced options > Clear cache.

Auto. bookmarks—To disable automatic bookmark

collecting, select Off. If you want to continue collecting

automatic bookmarks but hide the folder from the

bookmarks view, select Hide folder.

Your device may have some bookmarks loaded for sites

not affiliated with Nokia. Nokia does not warrant or

endorse these sites. If you choose to access them, you

should take the same precautions, for security or content,

as you would with any Internet site.

Screen size—To select what is shown when you are

browsing. Select Select. keys only or Full screen.

Search page—To define a Web page that is downloaded

when you select Navigation options > Open search page

in the bookmarks view, or when browsing.

Settings for Services

Select Options > Settings and the following settings:

Access point—To change the default access point, press

the joystick to open a list of available access points. See

‘Connection’, p. 103. Some or all access points may be

preset for your device by your service provider or network

operator, and you may not be able to change, create, edit,

or remove them.

Rendering—If you want the page layout shown as

accurately as possible when in Small screen mode, select

By quality. If you do not want external cascading style

sheets to be downloaded, select By speed.

Cookies—To enable or disable the receiving and sending of

cookies.

Homepage—To define the home page.

Glossary: Cookies are a means of content providers to

identify users and their preferences for frequently used

content.

Load imgs. & sounds—Select whether you want to load

images while browsing. If you select No, to load images

later during browsing, select Options > Show images.

Java/ECMA script—To enable or disable the use of scripts.

Font size—To choose the text size.

Security warnings—To hide or show security notifications.

Conf. DTMF sending—Choose whether you want to

confirm before the device sends DTMF tones during a voice

call. See also ‘Options during a voice call’, p. 34.

Web feeds: You can subscribe to news and blog feeds

hosted by many web sites. The Web feeds feature of the

browser will also alert the user when feed links are

available for a web site.

For information on other features and options in Web, see

‘Services’, p. 84.

Web

Press

, and select Internet > Web to open a

Download!

supplementary web browser optimized for browsing web

sites that are not originally formatted for mobile browsing.

Web preserves the original page layout.

Download! (network service) is a mobile content shop

available on your device. You can browse, download, and

install items, such as applications and media files, to your

device from the Internet.

To easily scroll within a page, scroll to any direction on a

page. A smaller image of the page is displayed with a red

frame that indicates the currently shown area.

The items are categorized under catalogs and folders

provided by different service providers. Some items may be

chargeable, but you can usually preview them free of

charge.

To view the thumbnail image of the current page you can

also select Options > Tools > Page overview. Move the red

frame with the joystick and press the joystick to return to

normal view.

Press

, and select Internet > Download!

To view recently visited pages as thumbnails, select

Options > Navigation options.

For details, see the Additional applications leaflet

available at www.nokia.com/support..

To block pop-up windows, select Options > Settings >

Block pop-up windows.

To search for a text in real time, select Options > Find and

start entering the search string. The matching string is

displayed as you enter the text.

Connectivity

profile. To ensure interoperability between other devices

supporting Bluetooth technology, use Nokia approved

enhancements for this model. Check with the

manufacturers of other devices to determine their

compatibility with this device.

Bluetooth connectivity

You can connect wirelessly to other compatible devices

with wireless Bluetooth technology. Compatible devices

may include mobile phones, computers, and

enhancements such as headsets and car kits. You can use

Bluetooth connectivity to send images, video clips, music

and sound clips, and notes; connect wirelessly to your

compatible PC (for example, to transfer files).

Glossary: A profile corresponds to a service or a

function, and defines how different devices connect.

For example, the Handsfree Profile is used between the

handsfree device and the phone. For devices to be

compatible, they must support the same profiles.

Since devices with Bluetooth technology communicate

using radio waves, your device and the other device do not

need to be in direct line-of-sight. The two devices only

need to be within 10 meters (33 feet) of each other,

although the connection may be subject to interference

from obstructions such as walls or from other electronic

devices.

There may be restrictions on using Bluetooth technology in

some locations. Check with your local authorities or service

provider.

Features using Bluetooth technology, or allowing such

features to run in the background while using other

features, increase the demand on battery power and

reduce the battery life.

This device is compliant with Bluetooth Specification 1.2

supporting the following profiles: Generic Access Profile,

Serial Port Profile, Dial-up Networking Profile, Headset

Profile, Handsfree Profile, Generic Object Exchange

Profile, Object Push Profile, File Transfer Profile, Basic

Imaging Profile, Advanced Audio Distribution Profile,

Audio/Video Remote Control Profile, and SIM Access

When the device is locked, you cannot use Bluetooth

connectivity. See ‘Security’, p. 107 for more information on

locking the device.

other device as authorized. See ‘Pair devices’, p. 92. The

remote SIM mode is activated from the other device.

Settings

Press

, and select Connect. > Bluetooth. When you

When remote SIM mode is on in your Nokia N91, Remote

open the application for the first time, you are asked to

define a name for your device. After you set Bluetooth

connectivity on and change My phone's visibility to

Shown to all, your device and this name can be seen by

other users with devices using Bluetooth technology.

SIM is displayed in the standby mode. The connection to

the wireless network is turned off, as indicated by

the signal strength indicator area, and you cannot use SIM

card services or features requiring cellular network

coverage. However, a wireless LAN connection remains

active during the remote SIM mode.

Select from the following:

Bluetooth—Select On or Off. To connect wirelessly to

another compatible device, first set Bluetooth connectivity

On, then establish a connection.

Warning: In the remote SIM mode, you cannot make

or receive any calls with your device, except make calls

to certain emergency numbers, or use other features

that require network coverage. To make calls, you must

first leave the remote SIM mode. If the device has been

locked, enter the lock code.

My phone's visibility—To allow your device to be found by

other devices with Bluetooth technology, select Shown to

all. To hide it from other devices, select Hidden.

To leave the remote SIM mode, press the power key, and

select Exit rem. SIM mode.

My phone's name—Edit the name of your device.

Remote SIM mode—To enable another device, such as a

car kit enhancement, to use the SIM card in your device to Security tips

connect to the network, select On.

When you are not using Bluetooth connectivity, select

Bluetooth > Off or My phone's visibility > Hidden.

The remote SIM mode

Operating the phone in hidden mode is a safer way to

avoid malicious software.

To use the remote SIM mode, set Bluetooth connectivity

on, and enable the use of the remote SIM mode with your

device. Before the mode can be activated, the two devices

must be paired and the pairing initiated from the other

device. When pairing, use a 16-digit passcode, and set the

Do not pair with an unknown device. Do not accept

Bluetooth connectivity from sources you do not trust.

To interrupt the search, select Stop.

Send data using Bluetooth

connectivity

Several Bluetooth connections can be active at a time. For

example, if you are connected to a headset, you can also

transfer files to another compatible device at the same

time.

3 Select the device with which you want to connect.

4 If the other device requires pairing before data can be

transmitted, a tone sounds, and you are asked to enter

a passcode. See ‘Pair devices’, p. 92.

5 When the connection has been established, Sending

data is shown.

The Sent folder in Messag. does not store messages sent

Bluetooth connectivity indicators

using Bluetooth connectivity.

•

When

connectivity is on.

When

with another device.

is shown in the standby mode, Bluetooth

Tip! When searching for devices, some devices may

show only the unique address (device address). To find

the unique address of your device, enter the code

*#2820# in the standby mode.

is blinking, your device is trying to connect

When

is shown continuously, data is being

transmitted using Bluetooth connectivity.

Pair devices

To open the paired devices view (

application main view, scroll right.

Tip! To send text using Bluetooth connectivity, open

Notes, write the text, and select Options > Send > Via

Bluetooth.

), in the Bluetooth

1 Open an application or folder where the item you want

to send is stored. For example, to send an image to

another compatible device, open Gallery.

2 Select the item and Options > Send > Via Bluetooth.

The device icon, the name of the device, the device

type, or a short name for devices with Bluetooth

technology within range start to appear on the display.

Before pairing, create your own passcode (1—16 digits),

and agree with the owner of the other device to use the

same code. Devices that do not have a user interface have

a factory-set passcode. The passcode is used only once.

To pair with a device, select Options > New paired device.

Devices with wireless Bluetooth technology within range

start to appear on the display. Select the device, and enter

the passcode. The same passcode must be entered on the

Device icons:

video device, and

computer, phone,

other device.

audio or

other device as well. After pairing, the device is saved to

the paired devices view.

message. If you accept,

is shown, and the item is

placed in the Inbox folder in Messag.. Messages received

through Bluetooth connectivity are indicated by . See

‘Inbox—receive messages’, p. 44.

Paired devices are indicated by

in the device search.

To set a device as authorized or unauthorized, scroll to a

device, and select from the following options:

Switch off Bluetooth connectivity

To switch off Bluetooth connectivity, select Bluetooth >

Off.

Set as authorised—Connections between your device and

this device can be made without your knowledge. No

separate acceptance or authorization is needed. Use this

status for your own devices, such as your compatible

headset or PC, or devices that belong to someone you trust.

indicates authorized devices in the paired devices view.

Data cable

Set as unauthorised—Connection requests from this

You can connect to a compatible PC with a USB data

cable. With data cable connectivity, you can use Nokia PC

Suite and transfer music or other data, such as image files,

between your device and the PC. See ‘Transfer music’, p. 20

for more information on transferring music.

device must be accepted separately every time.

To cancel a pairing, scroll to the device, and select

Options > Delete. If you want to cancel all pairings, select

Options > Delete all.

Tip! If you are currently connected to a device and

delete the pairing with that device, pairing is removed

immediately, and the connection is switched off.

Press

, and select Connect. > Data cbl. > Data cable

mode. Select Media player to transfer music, PC Suite to

use Nokia PC Suite, or Data transfer to transfer other

data. To have the device ask the purpose of the connection

each time the cable is connected, select Ask on

connection.

Receive data using Bluetooth

connectivity

When you receive data through Bluetooth connectivity, a

tone sounds, and you are asked if you want to accept the

Your device as a modem

PC connections

You can use your device as a modem to send and receive

e-mail, or to connect to the Internet with a compatible PC

by using a Bluetooth connection or a data cable. Detailed

installation instructions can be found in the User Guide for

Nokia PC Suite in Modem options on the CD-ROM.

You can use your device with a variety of PC connectivity

and data communications applications. With Nokia PC

Suite you can, for example, backup and restore your

settings and DRM rights objects, synchronise contacts,

calendar and To-do notes, and transfer images between

your device and a compatible PC. Because of the high

capacity of the 8 GB hard drive you can store hundreds of

images and songs in the device.

Tip! When using Nokia PC Suite for the first time, to

connect your device to a compatible PC and to use

Nokia PC Suite, use the Get Connected wizard available

in Nokia PC Suite. See the CD-ROM supplied in the sales

package.

Always create the connection from the PC to synchronise

with your device.

For further information on how to install Nokia PC Suite

(compatible with Windows 2000 and Windows XP), see

the User Guide for Nokia PC Suite and the Nokia PC Suite

help in the ‘Install’ section on the CD-ROM supplied in the

sales package.

Connection manager

You may have multiple data connections active at the

same time when you are using your device in GSM and

UMTS networks. Press

, and select Connect. > Conn.

CD-ROM

mgr. To view the status of data connections or end

connections in GSM and UMTS network and wireless LAN,

select Act. data conn.. To search for wireless LANs

available within range, select Availab. WLAN.

The CD-ROM should launch after you have inserted it into

the CD-ROM drive of a compatible PC. If not, proceed as

follows: Open Windows Explorer, right-click the CD-ROM

drive where you inserted the CD-ROM, and select

Autoplay.

Recvd.—The amount of data, in bytes, received to your

Data connections

In the active connections view, you can see the open data

connections: data calls ( ), packet data connections (

or ), and wireless LAN connections ( ).

device.

Sent—The amount of data, in bytes, sent from your device.

Duration—The length of time that the connection has

been open.

Note: The actual time invoiced for calls by your

service provider may vary, depending on network

features, rounding off for billing, and so forth.

Speed—The current speed of both sending and receiving

data in kilobytes per second.

To end a connection, select Options > Disconnect. To close

Dial-up—The dial-up number used.

all open connections, select Options > Disconnect all.

Shared (not shown if the connection is not shared)—The

number of applications using the same connection.

To view the details of a connection, select Options >

Details. The details shown depend on the connection type.

Wireless LAN

Your device is approved for use in a wireless local area

network (wireless LAN). With wireless LAN, you can

connect your device to the Internet.

View data connection details

To view the details of a connection, scroll to a connection,

and select Options > Details.

Name—The name of the Internet access point (IAP) in use,

or the modem connection name if the connection is a

dial-up connection.

Some places, like France, have restrictions on the use of

wireless LAN. Check with your local authorities for more

information.

Bearer—The type of data connection: Data call, High

speed (GSM), or Packet data.

Features using wireless LAN, or allowing such features to

run in the background while using other features, increase

the demand on battery power and reduce the battery life.

Status—The current status of the connection: Connecting,

Conn. (inactive), Conn.(active), On hold, Disconnecting,

or Disconnected.

Your device supports the following wireless LAN features:

•

IEEE 802.11g standard

•

Operation at a frequency of 2.4 GHz

You can use wireless LAN during a voice call or when

packet data is active. You can only be connected to one

wireless LAN access point device at a time, but several

applications can use the same wireless LAN connection.

Encryption methods wired equivalent privacy (WEP)

with keys up to 128 bits, Wi-Fi protected access

(WPA), and 802.1x. These functions can be used only if

they are supported by the network.

When you activate the Offline profile, you can still use

wireless LAN (if available). Remember to comply with any

applicable safety requirements when establishing and

using a wireless LAN connection.

You can create an Internet access point (IAP) in a wireless

LAN and use it for applications that need to connect to

the Internet.

Create an Internet access point

There are two operating modes in wireless LAN:

1 Press

, and select Connect. > Conn. mgr. >

Infrastructure and Ad-hoc.

Availab. WLAN.

The infrastructure operating mode allows two kinds of

communication: wireless devices are connected to each

other through a wireless LAN access point device, or

wireless devices are connected to a wired LAN through a

wireless LAN access point device.

2 The device searches for wireless LANs within range. To

create an Internet access point in a network, select

Options > Define access point.

3 The device creates an Internet access point with

default settings. To view or change the settings of the

Internet access point, see ‘Access points’, p. 104.

In the ad hoc operating mode, devices can send and receive

data directly with each other. To create an Internet access

point for the ad hoc network, see ‘Access points’, p. 104.

When an application asks you to select an access point,

select the created access point, or Search for WLAN, to

search for wireless LANs in range.

Tip! To check the unique Media Access Control (MAC)

address that identifies your device, enter *#62209526#

in the standby mode.

A wireless LAN connection is established when you create

a data connection using a wireless LAN Internet access

point. The active wireless LAN connection ends when you

end the data connection. To end the connection, see

‘Connection manager’, p. 94.

Synchronisation

Press

, and select Connect. > Sync. Sync enables you

Scroll to each application and press the joystick to

define its synchronization settings:

• Include in sync—Select Yes if you want to

synchronise the application.

to synchronise your notes, calendar, and contacts with

various calendar and address book applications on a

compatible PC or on the Internet.

• In Remote database, enter a correct path to the

remote calendar, address book, or database on the

server.

• Select Synchronisation type: Normal (two-way

synchronisation), To server only, or To phone only.

Connection settings—Define the following. Contact

your service provider or system administrator for the

correct values.

The synchronisation application uses SyncML technology

for synchronisation. For information on SyncML

compatibility, contact the supplier of the calendar or

address book application you want to synchronise your

phone data with.

You may receive syncronisation settings in a special text

message. See ‘Data and settings’, p. 44.

• Server version—Select the SyncML version the

synchronization server uses. You must select 1.2 to

synchronize e-mail.

• Server ID—Enter the server ID for the e-mail server

(shown only if Server version is set to 1.2).

• Data bearer—Select the connection type: Internet,

or Bluetooth.

• Access point (shown only if Data bearer is set to

Internet)—Select an access point to use for the data

connection.

• Host address—The IP address of the host server.

• Port—The server port number (shown only if Data

bearer is set to Internet).

• User name—Your user ID for the synchronisation

server.

Create a new synchronisation profile

1 If no profiles have been defined, your device asks if you

want to create a new profile. Select Yes.

To create a new profile in addition to existing ones,

select Options > New sync profile. Choose whether

you want to use the default setting values or copy the

values from an existing profile to be used as the basis

for the new profile.

2 Define the following:

Sync profile name—Write a descriptive name for the

profile.

Applications—Select the applications to synchronize

with this profile, Contacts and Calendar, for example.

• Password—Your password for the synchronization

server.

how many calendar or contact entries, or notes have

been added, updated, deleted, or discarded (not

synchronized) in your device or on the server.

• Allow sync requests—Select Yes if you want to

allow the server to start a synchronization.

• Accept all sync reqs.—Select No if you want your

device to ask you before a synchronization

initialised by the server is started.

Device manager

• Network authentic. (shown only if Data bearer is

set to Internet)—Select Yes to enter a network user

name and password. Scroll down to view the user

name and password fields.

Press

, and select Connect. > Device mgr.. You may

receive server profiles and different configuration settings

from your network operator, service provider, or company

information management department. These configuration

settings may include access point settings for data

connections and other settings used by different

applications in your device.

3 Select Back to save the settings and return to the main

view.

Synchronise data

In the Sync main view, you can see the different

synchronization profiles and the kind of data to be

synchronized.

1 Select a synchronization profile and Options >

Synchronise. The status of the synchronization is

shown at the bottom of the screen.

To cancel synchronization before it finishes, select

Cancel.

2 You are notified when the synchronization is

complete. After synchronization is complete, select

Options > View log to open a log file showing the

synchronization status (Complete or Incomplete) and

To connect to a server and receive configuration settings

for your device, select Options > Start configuration.

Server profile settings

Contact your service provider for the correct settings.

Server name—Enter a name for the configuration server.

Server ID—Enter the unique ID to identify the

configuration server.

Server password—Enter a password to identify your device

to the server.

Access point—Select an access point to be used when

connecting to the server.

Host address—Enter the URL address of the server.

Port—Enter the port number of the server.

User name and Password—Enter your user name and

password.

Allow configuration—To receive configuration settings

from the server, select Yes.

Auto-accept all requests—If you want your device to ask

for confirmation before accepting a configuration from the

server, select No.

Network authentication—Select whether network

authentication is used.

Tools

4 Settings wizard prompts you to enter the details of

your e-mail address, user name, and password. Select

each in turn, and select Options > Change. Enter the

details, and select OK.

5 Select Options > OK when you are finished.

6 Select OK to confirm that you want to set up the

mailbox for the specified operator.

Settings wizard

Settings wizard configures your device for operator

(MMS, GPRS, mobile Internet, and streaming), e-mail, and

push to talk (network service) settings based on your

network operator information.

7 Select OK.

To use these services, you may have to contact your

network operator or service provider to activate a data

connection or other services.

Push to talk

This option is available only if you have the application

installed in your device, and you have subscribed to the

service.

Press

, and select Tools > Sett. wizard.

Select the item from the menu that you want to configure

your device for, and press the joystick.

1 When you choose to configure your push-to-talk

(network service) settings, Settings wizard detects

your available network operator, and asks you to

confirm it. Select OK, or scroll to another network

operator, and select OK.

2 Some operators require a user name, password, and

nickname. Select each in turn, and select Options >

Change. Enter the details, and select OK.

E-mail

1 When you choose to configure your e-mail settings,

Settings wizard detects your available network

operator, and asks you to confirm it. Select OK, or

scroll to another network operator, and select OK.

2 Select your e-mail service provider from the list.

3 Select the outgoing mail server. Use the default server

if you are not sure.

3 Select Options > OK when you are finished.

4 Select OK to confirm that you want to set up Push to

talk for the specified operator.

100

and time and the separators used, for example, in

calculations. Automaticselects the language according to

the information on your SIM card. After you change the

display text language, the device restarts.

Operator

1 When you choose to configure your operator settings,

Settings wizard detects your available network

operator and asks you to confirm it. Select OK, or scroll

to another network operator, and select OK.

2 Select OK to confirm that you want to set up your

device for the specified operator.

Changing the settings for Phone language or Writing

language affects every application in your device, and the

change remains effective until you change these settings

again.

Writing language—Changing the language affects the

characters and special characters available when writing

text and the predictive text dictionary used.

More information

If you experience any problems with Settings wizard, visit

the Nokia phone settings Web site at

Predictive text—You can set the predictive text input On

or Off for all editors in the device. The predictive text

dictionary is not available for all languages.

www.nokia.com/phonesettings.

Settings

Welcome note / logo—The welcome note or logo is

displayed briefly each time you switch on the device.

Select Default to use the default image, Text to write a

welcome note (up to 50 letters), or Imageto select a photo

or picture from Gallery.

To change settings, press

, and select Tools > Settings.

Scroll to a setting group, and press the joystick to open it.

Scroll to a setting you want to change, and press the

joystick.

Orig. phone settings—You can reset some of the settings

to their original values. To do this, you need the lock code.

See ‘Security’, ‘Phone and SIM’, p. 108. After resetting, the

device may take a longer time to power on. Documents

and files are not affected.

Phone

General

Phone language—Changing the language of the display

texts in your device also affects the format used for date

101

Power saver time-out—The power saver is activated when

Standby mode

Active standby—Use shortcuts to applications in the

standby mode on the display. See ‘Active standby mode’,

p. 29.

the time-out period is over.

Light time-out—Select a time-out after which the

backlight of the display is switched off.

Left selection key—To assign a shortcut to the left

Call settings

selection key (

) in the standby mode, select an

application from the list.

Send my caller ID (network service)—You can set your

phone number to be displayed to (Yes) or hidden from (No)

the person to whom you are calling, or the value may be

set by your network operator or service provider when you

make a subscription (Set by network).

Right selection key—To assign a shortcut to the right

selection key (

) in the standby mode, select an

application from the list.

Active standby apps.—To select the application shortcuts

you want to appear in the active standby mode, select the

applications from the list. This setting is only available if

Active standby is on.

Call waiting (network service)—If you have activated call

waiting, the network notifies you of a new incoming call

while you have a call in progress. Select Activate to

request the network to activate call waiting, Cancel to

request the network to deactivate call waiting, or Check

status to check if the function is active or not.

You can also assign shortcuts to different movements of

the joystick. Select the application for each movement

from a list. The joystick shortcuts are only available if

Active standby is off.

Reject call with SMS—Select Yes to send a text message

to a caller informing why you could not answer the call.

See ‘Answer or reject a call’, p. 33.

Operator logo—This setting is visible only if you have

received and saved an operator logo. You can choose

whether you want the operator logo to show or not.

Message text—Write a text to be sent in a text message

when you reject a call.

Display

Automatic redial—Select On, and your device makes a

maximum of ten attempts to connect the call after an

Brightness—You can change the brightness of the display

to be lighter or darker.

102

unsuccessful call attempt. To stop automatic redialling,

press

Connection

Data connections and access points

Your device supports packet data connections ( ), such

as GPRS in the GSM network.

Summary after call—Activate this setting if you want the

device to briefly display the approximate duration of the

last call.

Speed dialling—Select On, and the numbers assigned to

Glossary: General packet radio service (GPRS) uses

packet data technology where information is sent in

short packets of data over the mobile network.

the speed dialing keys (

) can be dialed by pressing

and holding the key. See also ‘Speed dial a phone number’,

p. 32.

To establish a data connection, an access point is required.

You can define different kinds of access points, such as:

Anykey answer—Select On, and you can answer an

incoming call by briefly pressing any key under the slide

cover.

•

MMS access point to send and receive multimedia

messages

Access point for the Web application to view WML or

XHTML pages

Line in use (network service)—This setting is shown only if

the SIM card supports two subscriber numbers, that is, two

phone lines. Select which phone line you want to use for

making calls and sending text messages. Calls on both lines

can be answered irrespective of the selected line. If you

select Line 2 and have not subscribed to this network

service, you will not be able to make calls. When line 2 is

selected, is shown in the standby mode.

Internet access point (IAP) to send and receive e-mail

Check the type of access point you need with your service

provider for the service you wish to access. For availability

and subscription to packet data connection services,

contact your network operator or service provider.

Packet data connections in GSM and UMTS

networks

Tip! To switch between the phone lines, press and

hold

in the standby mode.

When you use your device in GSM and UMTS networks,

multiple data connections can be active at the same time

and access points can share a data connection. In the

UMTS network, data connections remain active during

Line change (network service)—To prevent line selection,

select Line change > Disable if supported by your SIM

card. To change this setting, you need the PIN2 code.

103

voice calls. To check the active data connections, see

‘Connection manager’, p. 94.

access point settings in a text message from a service

provider. See ‘Data and settings’, p. 44.

The following indicators may be displayed below the

signal indicator, depending on which network you use:

Tip!See also ‘Receive MMS and e-mail settings’, p. 43,

‘E-mail’, p. 51, and ‘Access point for Services’, p. 84.

GSM network, packet data is available in the network.

indicates a packet data access point, and

wireless LAN access point.

GSM network, packet data connection is active, data is

being transferred.

To create a new access point, press

Settings > Connection > Access points > Options > New

, and select Tools >

GSM network, multiple packet data connections are

active.

access point.

Follow the instructions given to you by your service

provider.

GSM network, packet data connection is on hold. (This

can happen during a voice call, for example.)

Connection name—Give a descriptive name for the

UMTS network, packet data is available in the network.

connection.

UMTS network, packet data connection is active, data

is being transferred.

Data bearer—Depending on what data connection you

select, only certain setting fields are available. Fill in all

fields marked with Must be defined or with a red asterisk.

Other fields can be left empty, unless you have been

instructed otherwise by your service provider.

UMTS network, multiple packet data connections are

active.

UMTS network, packet data connection is on hold.

To be able to use a data connection, the network service

provider must support this feature, and if necessary,

activate it for your SIM card.

Access points

Some or all access points may be preset for your device by

your service provider or network operator, and you may

not be able to change, create, edit, or remove them.

indicates a protected access point. You may also receive

Packet data

Follow the instructions from your service provider.

104

Access point name (for packet data only)—The access

point name is needed to establish a connection to the

packet data and UMTS networks. You obtain the access

point name from your network operator or service provider.

DNS address— Primary DNS address, Second. name

server: Contact your Internet service provider to obtain

these addresses.

Glossary: The domain name service (DNS) is an

Internet service that translates domain names such as

www.nokia.com into IP addresses like

192.100.124.195.

User name—The user name may be needed to make a data

connection, and it is usually provided by the service

provider. The user name is often case-sensitive.

Prompt password—Select Yes if you must enter a new

password every time you log in to a server, or if you do not

want to save your password in your device.

Proxy serv. address—Define the address for the proxy

server.

Proxy port number—Enter the proxy port number.

Password—A password may be needed to make a data

connection, and it is usually provided by the service

provider. The password is often case-sensitive.

SIP settings

SIP (Session Initiation Protocol) settings are needed for

certain network services using SIP, such as video sharing.

You may receive the settings in a special text message

from your network operator or service provider. You can

view, delete, or create these setting profiles in SIP

settings.

Authentication—Select Normal or Secure.

Homepage—Depending on what you are setting up, write

the Web address or the address of the multimedia

messaging centre. Complete the Advanced settings to

further define your access details:

Data call

Network type—Select the Internet protocol type to use:

IPv4or IPv6. The other settings depend on the selected

network type.

The data call settings affect all access points that use a

GSM data call.

Online time—Set data calls to disconnect automatically

after a time-out if there is no activity. To enter a time-out,

select User defined, and enter the time in minutes. If you

select Unlimited, data calls are not disconnected

automatically.

Phone IP address (for IPv4)—Enter the IP address of your

device.

105

Wireless LAN

WEP key settings—Enter WEP encryption (length of the

key), WEP key format (ASCII or Hexadecimal), and WEP

key (the WEP key data in the selected format).

Follow the instructions from your service provider.

WLAN netw. name—Select Enter manually or Search

for netw.. If you select an existing network, WLAN netw.

mode and WLAN security mode are determined by the

settings of its access point device.

Security settings for 802.1x and WPA/WPA2:

WPA mode—Select the means of authentication: EAP to

use an extensible authentication protocol (EAP) plug-in, or

Pre-shared key to use a password. Complete the

appropriate settings:

WLAN netw. mode—Select Ad-hoc to create an ad-hoc

network and to allow devices to send and receive data

directly; a wireless LAN access point device is not needed. EAP plug-in settings (only for EAP)—Enter the settings as

your service provider instructs.

WLAN security mode—Select the encryption used: WEP,

802.1x (not for ad hoc networks), or WPA/WPA2. If you

select Open network, no encryption is used. The WEP,

802.1x, and WPA functions can be used only if the

network supports them.

Pre-shared key (only for Pre-shared key)—Enter a

password. The same password must be entered on the

wireless LAN access point device.

TKIP encryption—Select whether Temporal Key Integrity

Protocol (TKIP) is used.

WLAN security sett.—Enter the settings for the selected

security mode:

Homepage—Define a home page.

Security settings for WEP:

Select Options > Advanced settings and from the

following:

Wep key in use—Select the WEP key number. You can

create up to four WEP keys. The same settings must be

entered on the wireless LAN access point device.

IPv4 settings: Phone IP address (the IP address of your

device), Subnet mask (the subnet IP address), Default

gateway (the gateway), and DNS address—enter the IP

addresses of the primary and secondary DNS server.

Contact your Internet service provider for these addresses.

Authentication type—Select Open or Shared for the

authentication type between your device and the wireless

LAN access point device.

106

IPv6 settings > DNS address—Select Automatic, Well-

the settings may be stored on your SIM or USIM card. You

can save these settings to your device, view, or delete

them in Configurations.

known, or User defined.

Ad-hoc channel (only for Ad-hoc)—To enter a channel

number (1-11) manually, select User defined.

Date & time

See ‘Clock settings’, p. 15.

Proxy serv. address—Enter the address for the proxy

server.

See also the language settings in ‘General’, p. 101.

Proxy port number—Enter the proxy port number.

Packet data

The packet data settings affect all access points using a

packet data connection.

Security

Phone and SIM

PIN code request—When active, the code is requested

each time the device is switched on. Deactivating the

personal identification number (PIN) code request may not

be allowed by some SIM cards. See ‘Glossary of PIN and

lock codes’, p. 108.

Packet data conn.—If you select When available and you

are in a network that supports packet data, the device

registers to the packet data network. Also, starting an

active packet data connection is quicker (for example, to

send and receive e-mail). If you select When needed, the

device uses a packet data connection only if you start an

application or action that needs it. If there is no packet

data coverage and you select When available, the device

periodically tries to establish a packet data connection.

PIN code, PIN2 code, and Lock code—You can change the

lock code, PIN code, and PIN2 code. These codes can only

include the numbers from 0 to 9. See ‘Glossary of PIN and

lock codes’, p. 108.

Access point—The access point name is needed to use your

Avoid using access codes similar to the emergency

numbers to prevent accidental dialling of the emergency

number.

device as a packet data modem to your PC.

Configurations

You may receive trusted server settings from your network

operator or service provider in a configuration message, or

If you forget any of these codes, contact your service

provider.

107

Autolock period—You can set an autolock period, a

timeout after which the device automatically locks and

can be used only if the correct lock code is entered. Enter

a number for the timeout in minutes, or select None to

turn off the autolock period.

Glossary of PIN and lock codes

If you forget any of these codes, contact your service

provider.

Personal identification number (PIN) code—This code

protects your SIM card against unauthorised use. The PIN

code (4 to 8 digits) is usually supplied with the SIM card.

After three consecutive incorrect PIN code entries, the PIN

code is blocked, and you need to unblock it before you can

use the SIM card again. See the information about the PUK

code in this section.

To unlock the device, enter the lock code.

When the device is locked, calls still may be possible to

the official emergency number programmed into your

device.

Tip! To lock the device manually, press

. A list of

commands opens. Select Lock phone. For information

UPIN code—This code may be supplied with the USIM card.

The USIM card is an enhanced version of the SIM card and

is supported by UMTS mobile phones. The UPIN code

protects the USIM card against unauthorised use.

on Lock switch see ‘Keypad lock (keyguard)’, p. 17.

Lock if SIM changed—You can set the device to ask for

the lock code when an unknown SIM card is inserted into

your device. The device maintains a list of SIM cards that

are recognised as the owner’s cards.

PIN2 code—This code (4 to 8 digits) is supplied with some

SIM cards, and is required to access some functions in your

device.

Closed user group (network service)—You can specify a

group of people to whom you can call and who can call

you.

Lock code (also known as security code)—This code (5

digits) can be used to lock the device to avoid unauthorised

use. The factory setting for the lock code is 12345. To

avoid unauthorised use of your device, change the lock

code. Keep the new code secret and in a safe place

separate from your device.

When calls are limited to closed user groups, calls still

may be possible to the official emergency number

programmed into your device.

Confirm SIM services (network service)—You can set the

device to display confirmation messages when you are

using a SIM card service.

Personal unblocking key (PUK) code and PUK2 code—These

codes (8 digits) are required to change a blocked PIN code

or PIN2 code, respectively. If the codes are not supplied

108

with the SIM card, contact the operator whose SIM card is

in your device.

installation considerably smaller, they must be used

correctly in order to benefit from increased security. The

existence of a certificate does not offer any protection by

itself; the certificate manager must contain correct,

authentic, or trusted certificates for increased security to

be available. Certificates have a restricted lifetime. If

Expired certificate or Certificate not valid yet is shown

even if the certificate should be valid, check that the

current date and time in your device are correct.

UPUK code—This code (8 digits) is required to change a

blocked UPIN code. If the code is not supplied with the

USIM card, contact the operator whose USIM card is in

your device.

Certificate management

Digital certificates do not guarantee safety; they are used

to verify the origin of software.

View certificate details—check authenticity

Glossary: Digital certificates are used to verify the

origin of the XHTML or WML pages and installed

software. However, they can only be trusted if the

origin of the certificate is known to be authentic.

You can only be sure of the correct identity of a server

when the signature and the period of validity of a server

certificate have been checked.

You are notified on the device display if the identity of the

server is not authentic or if you do not have the correct

security certificate in your device.

In the certificate management main view, you can see a

list of authority certificates that are stored in your device.

Scroll right to see a list of personal certificates, if available.

To check certificate details, scroll to a certificate, and

select Options > Certificate details. When you open

certificate details, the validity of the certificate is checked,

and one of the following notes may be displayed:

Digital certificates should be used if you want to connect

to an online bank or another site or remote server for

actions that involve transferring confidential information.

They should also be used if you want to reduce the risk of

viruses or other malicious software and be sure of the

authenticity of software when downloading and installing

software.

• Certificate not trusted—You have not set any

application to use the certificate. See ‘Change the trust

settings’, p. 110.

• Expired certificate—The period of validity has ended

for the selected certificate.

Important: Even if the use of certificates makes the

risks involved in remote connections and software

109

• Certificate not valid yet—The period of validity has

not yet begun for the selected certificate.

EAP plug-ins

You can view the EAP plug-ins currently installed in your

device (network service). Some Internet access points that

use wireless LAN as a data bearer and WPA security mode

use the plug-ins for authentication.

• Certificate corrupted—The certificate cannot be used.

Contact the certificate issuer.

Change the trust settings

Before changing any certificate settings, you must make

sure that you really trust the owner of the certificate and

that the certificate really belongs to the listed owner.

Security module

To view or edit a security module (if available) in Secur.

mod., scroll to it, and press the joystick. To view detailed

information about a security module, scroll to it, and select

Options > Security details.

Scroll to an authority certificate, and select Options >

Trust settings. Depending on the certificate, a list of the

applications that can use the selected certificate is

shown. For example:

Call diverting

Call divert allows you to divert your incoming calls to your

voice mailbox or another phone number. For details,

contact your service provider.

• Symbian installation: Yes—The certificate is able to

certify the origin of a new Symbian operating system

application.

• Internet: Yes—The certificate is able to certify servers.

• App. installation: Yes—The certificate is able to

certify the origin of a new Java application.

1 Press

, and select Tools > Settings > Call divert.

2 Select which calls you want to divert: Voice calls, Data

calls, or Fax calls.

Select Options > Edit trust setting to change the value.

3 Select the desired divert option. To divert voice calls

when your number is busy or when you reject incoming

calls, select If busy.

4 Set the divert option on (Activate) or off (Cancel), or

check whether the option is activated (Check status).

Several divert options can be active at the same time.

Track protect. object

Some copyright-protected music files may include a

transaction identifier. Select whether you allow the

identifier to be sent with the music file if you send or

forward the file. The provider of the music file can use the

identifier to track the distribution of the files.

110

When all calls are diverted,

mode.

is shown in the standby

Operator selection—Select Automatic to set the device

to search for and select one of the available networks, or

Manual to manually select the network from a list of

networks. If the connection to the manually selected

network is lost, the device sounds an error tone and asks

you to reselect a network. The selected network must have

a roaming agreement with your home network, that is, the

operator whose SIM card is in your device.

Call barring

Call barring (network service) allows you to restrict the

calls that you make or receive with the device. To change

the settings, you need the barring password from your

service provider. Select the desired barring option, and set

it on (Activate) or off (Cancel), or check whether the

option is active (Check status). Call barring affects all

calls, including data calls.

Glossary: A roaming agreement is an agreement

between two or more network service providers to

enable the users of one service provider to use the

services of other service providers.

When calls are barred, calls still may be possible to certain

official emergency numbers.

Cell info display—Select On to set the device to indicate

when it is used in a cellular network based on

microcellular network (MCN) technology and to activate

cell info reception.

Network

Your device can automatically switch between the GSM

and UMTS networks. The GSM network is indicated with

in the standby mode. The UMTS network is indicated

Enhanc. sett.

Indicator shown in the standby mode:

—A headset is connected.

with

Network mode (shown only if supported by the

Select Headset or Bluetooth handsfree and the following

options are available:

operator)—Select which network to use. If you select Dual

mode, the device uses the GSM or UMTS network

automatically, according to the network parameters and

the roaming agreements between the network operators.

Contact your network operator for more details.

Default profile—To set the profile that you want

activated each time you connect a certain enhancement

to your device. See ‘Profiles—Set tones’, p. 28.

111

Automatic answer—To set the device to answer an

incoming call automatically after 5 seconds. If the Ringing

type is set to Beep once or Silent, automatic answer is

disabled.

United States government, which is solely responsible for

accuracy and maintenance of the system. The accuracy of

location data can be affected by adjustments to GPS

satellites made by the United States government and is

subject to change with the United States Department of

Defense civil GPS policy and the Federal Radionavigation

Plan. Accuracy can also be affected by poor satellite

geometry. Availability and quality of GPS signals may be

affected by your location, buildings and natural obstacles

as well as weather conditions. The GPS receiver should only

be used outdoors to allow reception of GPS signals. GPS

should only be used as a navigation aid. It should not be

used for precise location measurement and you should

never rely solely on location data from the GPS receiver for

positioning or navigation.

Positioning

Press

, and select Tools > Position.. With Positioning,

you can enable one or more positioning methods to allow

compatible applications to receive the position

information of the current location of your device. When

you enable a positioning method you can, for example,

save the position information of your current location in

Landmarks and Navigator.

You may receive a request from a network service to

receive your position information. Service providers may

offer information about local topics, such as weather or

traffic conditions, based upon the location of your device.

Positioning methods may be network based (network

service) or they may require that you use a compatible

GPS receiver. To enable a positioning method, scroll the

method, and select Options > Enable.

When you receive a position request, a message is

displayed showing the service that is making the request.

Select Accept to allow your position information to be

sent, or select Reject to deny the request.

To start using a compatible GPS receiver with Bluetooth

connectivity for positioning, scroll to Bluetooth GPS, and

select Options > Enable. If asked, select your GPS receiver

from the found devices with Bluetooth connectivity, and

pair the devices. See “Pair devices”, p. 92.

Landmarks

The Global Positioning System

The Global Positioning System (GPS) is operated by the

112

Press

, and select Tools > Landmarks. With

To send one or several landmark to a compatible device,

select Options > Send. Your received landmarks are

placed in the Inbox folder in Messaging.

Landmarks, you can save the position information of

specific locations in your device. You can sort the saved

locations into different categories, such as business, and

add other information, such as addresses, to them. You can

use your saved landmarks in compatible navigation

applications, such as Navigator in your Nokia N91.

Voice commands

To create a new landmark, select Options > New

landmark. If your device is connected to a compatible GPS

receiver, you can make a positioning request for the

coordinates of your current location. Select Current

position to retrieve the position information. To enter the

position information manually, select Enter manually.

You can use voice commands to control your device. For

more information about the enhanced voice commands

supported by your device, see ‘Voice dialling’, p. 32.

To activate enhanced voice commands for starting

applications or profiles, you must open the Voice comms.

application and its Profiles folder. Press

, and select

To edit or add information to a saved landmark, for

example, a street address, scroll to a landmark, and press

the joystick. Scroll to the desired field and enter the

information.

Tools > Voice cm. > Profiles. The device creates voice

commands for the applications and profiles. You can now

use enhanced voice commands by pressing and holding

the right selection key (

) and saying a voice

command in the standby mode. The voice command is the

name of the application or profile displayed in the list.

You can sort your landmarks into the preset categories,

and create new categories. To edit and create new

landmark categories, scroll right in Landmarks, and select

Options > Edit categories.

To add more applications to the list, select Options > New

application. To add a second voice command that can be

used to start the application, scroll to it, select Options >

Change command, and enter the new voice command as

text. Avoid very short names, abbreviations, and acronyms.

To add a landmark to a category, scroll to the landmark,

and select Options > Add to category. Scroll to each

category to which you want to add the landmark, and press

the joystick to select it.

To change voice command settings, select Options >

Settings. To switch off the synthesiser that plays

113

recognised voice tags and commands in the selected

device language, select Synthesiser > Off. To reset voice

recognition learning, for example, when the main user of

the device has changed, select Reset voice adapts..

Example: If you have received the installation file as

an e-mail attachment, go to your mailbox, open the

e-mail, open the attachments view, scroll to the

installation file, and press the joystick to start

installation.

Application manager

Install applications and software

Tip! You can also use Nokia Application Installer

available in Nokia PC Suite to install applications. See

the CD-ROM supplied with the device.

Press

, and select Tools > App. mgr.. You can install

two types of applications and software to your device:

•

J2ME™ applications based on Java™ technology with

the extension .jad or .jar ( ).

Application icons are as follows:

—.sis application

Other applications and software suitable for the

Symbian operating system ( ). The installation files

have the .sis extension. Only install software

specifically designed for your Nokia N91. Software

providers will often refer to the official model number

of this product: the Nokia N91-2.

—Java application

—application is not fully installed.

Important: Only install and use applications and

other software from sources that offer adequate security

and protection against harmful software.

Installation files may be transferred to your device from a

compatible PC, downloaded during browsing, or sent to

you in a multimedia message, as an e-mail attachment, or

using Bluetooth connectivity. You can use Nokia

Application Installer in Nokia PC Suite to install an

application to your device. If you use Microsoft Windows

Explorer to transfer a file, save the file to the hard drive of

your device (local disk).

Before installation, note the following:

•

To view the application type, version number, security

certificate details, and the supplier or manufacturer of

the application, select Options > View details.

•

If you install a file that contains an update or repair to

an existing application, you can only restore the

original application if you have the original installation

file or a full back-up copy of the removed software

114

package. To restore the original application, remove the

application, and install the application again from the

original installation file or the back-up copy.

The .jar file is required for installing Java applications.

If it is missing, the device may ask you to download it.

If there is no access point defined for the application,

you are asked to select one. When you are downloading

the .jar file, you may need to enter a user name and

password to access the server. You obtain these from

the supplier or manufacturer of the application.

To start an installed application, locate it in the menu, and

press the joystick.

To start a network connection and to view extra

information about the application, scroll to it, and select

Options > Go to web address, if available.

•

To see what software packages were installed or removed

and when, select Options > View log.

To send your installation log to a help desk so that they

can see what was installed or removed, select Options >

Send log > Via text message or Via e-mail (available

only if the correct e-mail settings are in place).

To install applications and software complete these

steps:

1 Open App. mgr., and scroll to an installation file.

Alternatively, search the device memory or the hard

drive in File mgr., or open a message in Messag. >

Inbox that contains an installation file.

Remove applications and software

Scroll to a software package, and select Options >

Remove. Select Yes to confirm.

2 Select the application, and press the joystick to start

If you remove software, you can only reinstall it if you

have the original software package or a full backup of the

removed software package. If you remove a software

package, you may no longer be able to open documents

created with that software.

the installation.

Tip! While browsing, you can download an

installation file, and install it without closing the

connection.

During installation, the device shows information

about the progress of the installation. If you are

installing an application without a digital signature or

certification, the device displays a warning. Continue

installation only if you are sure of the origin and

contents of the application.

If another software package depends on the software

package that you removed, the other software package

may stop working. Refer to the documentation of the

installed software package for details.

115

Application settings

Tools

Select Options > Settings and from the following:

Scanning, defragmenting or formatting the hard drive

increases the demand on battery power. Switch the phone

to Offline mode, do not use your device for anything else

and use a charger while scanning, defragmenting or

formatting the hard drive.

Online certif. check—Select to check the online

certificates before installing an application.

Default web address—Set the default address used when

checking online certificates.

Scan hard drive

You can scan your hard drive to find and fix possible errors.

Some Java applications may require a phone call, a

message to be sent, or a network connection to a specific

access point for downloading extra data or components.

In the App. mgr. main view, scroll to an application, and

select Options > Suite settings to change settings

related to that specific application.

To scan your hard drive, select Options > Tools > Scan

hard drive. A progress bar is displayed.

After the scanning is completed you will be informed of the

results.

Defragment hard drive

For better results, scan the hard drive before you

defragment it.

Memory-Hard drive

To monitor the amount of used and free disk space on the

To optimize your hard drive, select Options > Tools >

device hard drive, press

, and select Tools > Hard

Defragment hard drive.

drive. To see how much disc space the different

applications and data types use, select Options >

Memory details.

You will be informed when the defragmentation is

completed.

Format hard drive

When the hard drive is formatted, all data on the drive is

permanently lost. Back up data you want to keep before

formatting the hard drive. You can use Nokia PC Suite to

To change the name of the hard drive, select Options >

Hard drive name.

116

back up data to a compatible PC. If your device needs to be

repaired or replaced, a back-up copy is required to restore

data protected by digital rights management technologies

(DRM).

If your device has WMDRM protected content both the

activation keys and the content will be lost if the device

memory is formatted. You may also lose the activation

keys and the content in case the files on your device get

corrupted. Losing the activation keys or the content may

limit your ability to use the same content on your device

again. For more information, contact your service provider.

To format the hard drive, select Options >Tools > Format

hard drive > Quick format or Full format. Use Full

format to completely clean the disk. This may be necessary

if you give your device to someone else and you want to

erase all the personal data first. Use Full format also if

you have disk corruption problems. If corrupted sectors are

found, Full format will isolate those sectors to prevent

further problems. Use Quick format for a previously

formatted disk just to quickly erase the content.

If your device has OMA DRM protected content, the only

way to back up both the activation keys and the content

is to use the backup feature of Nokia PC Suite. Other

transfer methods may not transfer the activation keys

which need to be restored with the content for you to be

able to continue the use of OMA DRM protected content

after the device memory is formatted. You may also need

to restore the activation keys in case the files on your

device get corrupted.

Formatting is not a 100% safe way to destroy confidential

data. Standard formatting only marks the formatted area

as available space and deletes the address to find the files

again. The recovery of formatted or even overwritten data

may still be possible with special recovery tools and

software.

Digital Rights Management

Digital rights management technologies may prevent some

back-up data from being restored. Contact your service

provider for more information about DRM used for your

content.

Content owners may use different types of digital rights

management technologies (DRM) to protect their

intellectual property, including copyrights. This device

uses various types of DRM software to access DRM

protected content. With this device you can access

content protected with WMDRM 10, OMA DRM 1.0 and

OMA DRM 2.0. If certain DRM software fails to protect the

Digital rights management (DRM) protected content

comes with an associated activation key that defines your

rights to use the content.

117

content, content owners may ask that such software's

ability to access new DRM protected content be revoked.

Revocation may also prevent renewal of such DRM

protected content already in your device. Revocation of

such DRM software does not affect the use of content

protected with other types of DRM or the use of non-

DRM-protected content.

To view activation keys for DRM protected content stored

in your device, press

and from the following:

, and select Tools > Actv. keys

Valid keys—View keys that are connected to one or more

media files and keys whose validity period has not started

yet.

Invalid keys—View keys that are not valid; the time period

for using the media file is exceeded or there is a protected

media file in the device but no connected activation key.

Not in use—View keys that have no media files connected

to them in the device.

To buy more usage time or extend the usage period for a

media file, select an invalid activation key and Options >

Get activation key. Activation keys cannot be updated if

Web service message reception is disabled. See ‘Web

service messages’, p. 52.

118

Troubleshooting

consume, select File manager > Options > Memory

Q&A

details.

Bluetooth connectivity

Q: The note Retrieving message is shown briefly. What is

happening?

Q: Why can’t I find my friend’s device?

A: The phone is trying to retrieve a multimedia message from

the multimedia messaging centre.

A: Check that both devices have activated Bluetooth

connectivity.

Check that the settings for multimedia messaging are

defined correctly and that there are no mistakes in phone

numbers or addresses. Select Messaging > Options >

Settings > Multim. msg..

Check that the distance between the two devices is not

over 10 metres and that there are no walls or other

obstructions between the devices.

Check that the other device is not in hidden mode.

Check that both devices are compatible.

Messaging

Q: Why can’t I end a Bluetooth connection?

Q: Why can’t I select a contact?

A: If another device is connected to your phone, you can either

end the connection using the other device or by

deactivating Bluetooth connectivity. Select Connect. >

Bluetooth > Off.

A: The contact card does not have a phone number or an

e-mail address. Add the missing information to the

contact card in Contacts.

Camera

Multimedia messaging

Q: Why do images look smudgy?

A: Ensure that the camera lens protection window is clean.

Wallpapers and Themes

Q: What should I do when the phone cannot receive a

multimedia message because memory is full?

A: The amount of memory needed is indicated in the error

message: Not enough memory to retrieve message.

Delete some data first. To view what kind of data you

have and how much memory the different data groups

Q: I turned my device off for charging and now my personal

wallpaper is no longer on the display. What has happened?

119

A: This may happen if you store your wallpaper on the

harddrive of your N91. Use the device memory to store

wallpapers and themes.

Q: Why do I have problems in connecting the phone to my PC?

A: Make sure that Nokia PC Suite is installed and running on

your PC. See the User Guide for Nokia PC Suite on the

CD-ROM. If Nokia PC Suite is installed and running, you

can use Nokia Get connected wizard available in Nokia PC

Suite to connect to your PC. For further information on

how to use Nokia PC Suite, see the help function on Nokia

PC Suite or visit the support pages at www.nokia.com.

Calendar

Q: Why are the week numbers missing?

A: If you have changed the calendar settings so that the week

starts on a day other than Monday, the week numbers are

not shown.

Access codes

Browser services

Q: What is my password for the lock, PIN, or PUK codes?

Q: What do I do if the following message is displayed: No

valid access point defined. Define one in Services

settings.?

A: The default lock code is 12345. If you forget or lose the lock

code, contact your phone dealer.

If you forget or lose a PIN or PUK code, or if you have not

received such a code, contact your network service

provider.

A: Insert the correct browser settings. Contact your service

provider for instructions.

For information about passwords, contact your access

point provider, for example, a commercial Internet service

provider (ISP), service provider, or network operator.

Log

Q: Why does the log appear empty?

A: You may have activated a filter, and no communication

events fitting that filter have been logged. To see all

events, select My Own > Log. Scroll right and select

Options > Filter > All communication.

Application not responding

Q: How do I close an application that is not responding?

A: Open the application switching window by pressing and

holding

. Then scroll to the application, and press

Q: How do I delete my log information?

to close the application.

A: Select My Own > Log > Options > Clear log or go to

Settings > Log duration> No log. These will erase the log

contents, recent calls register, and message delivery

reports permanently.

Phone display

Q: Why do missing, discoloured, or bright dots appear on the

screen every time I turn on my phone?

PC connectivity

120

A: This is a characteristic of this type of display. Some displays

may contain pixels or dots that remain on or off. This is

normal, not a fault.

Make sure that everything of any value has been copied to

your PC. Format the hard drive. For more information, see

‘Format hard drive’, p. 118

Proceed with the software update.

To reset your device memory, enter *#7370# and the code

12345.

Restore your device memory from the backup with Nokia

PC Suite.

Copy your hard drive contents back from your PC to the

formatted hard drive.

Memory low

Q: What can I do if my phone memory is low?

A: You can delete the following items regularly to avoid low

memory:

•

Messages from Inbox, Drafts, and Sent folders in Messag.

Retrieved e-mail messages from the phone memory

Saved browser pages

Reinstall the applications and themes.

Images and photos in Gallery

To delete contact information, calendar notes, call timers, call

cost timers, game scores, or any other data, go to the

respective application to remove the data. If you are deleting

multiple items and any of the following notes are shown: Not

enough memory to perform operation. Delete some data

first. or Memory low. Delete some data., try deleting items

one by one (starting from the smallest item).

Q: How can I save my data before a software update?

A: Always save your data if you are planning a software

update. Save your data using the following method:

Back up your device memory using Nokia PC suite.

Use a data cable connection in Data transfermode to copy

all your files (music, videos, images, documents,

uninstalled applications, themes and so on) from the hard

drive to your PC.

121

Battery information

spare battery in your pocket or purse. Short-circuiting the

terminals may damage the battery or the connecting object.

Charging and discharging

Your device is powered by a rechargeable battery. The full

performance of a new battery is achieved only after two or

three complete charge and discharge cycles. The battery can

be charged and discharged hundreds of times but it will

eventually wear out. When the talk and standby times are

noticeably shorter than normal, replace the battery. Use only

Nokia approved batteries, and recharge your battery only with

Nokia approved chargers designated for this device.

Leaving the battery in hot or cold places, such as in a closed

car in summer or winter conditions, will reduce the capacity

and lifetime of the battery. Always try to keep the battery

between 15°C and 25°C (59°F and 77°F). A device with a hot

or cold battery may not work temporarily, even when the

battery is fully charged. Battery performance is particularly

limited in temperatures well below freezing.

Do not dispose of batteries in a fire as they may explode.

Batteries may also explode if damaged. Dispose of batteries

according to local regulations. Please recycle when possible.

Do not dispose as household waste.

Unplug the charger from the electrical plug and the device

when not in use. Do not leave fully charged battery connected

to a charger, since overcharging may shorten its lifetime. If

left unused, a fully charged battery will lose its charge over

time.

Nokia battery authentication

guidelines

If the battery is completely discharged, it may take several

minutes before the charging indicator appears on the display

or before any calls can be made.

Always use original Nokia batteries for your safety. To check

that you are getting an original Nokia battery, purchase it from

an authorized Nokia dealer, look for the Nokia Original

Enhancements logo on the packaging and inspect the

hologram label using the following steps:

Use the battery only for its intended purpose. Never use any

charger or battery that is damaged.

Do not short-circuit the battery. Accidental short-circuiting

can occur when a metallic object such as a coin, clip, or pen

causes direct connection of the positive (+) and negative (-)

terminals of the battery. (These look like metal strips on the

battery.) This might happen, for example, when you carry a

Successful completion of the four steps is not a total

assurance of the authenticity of the battery. If you have any

reason to believe that your battery is not an authentic original

122

Nokia battery, you should refrain from using it and take it to

the nearest authorized Nokia service point or dealer for

assistance. Your authorized Nokia service point or dealer will

inspect the battery for authenticity. If authenticity cannot be

verified, return the battery to the place of purchase.

Confirm that the 20-digit code is

valid by following the instructions

at www.nokia.com/batterycheck.

To create a text message, key in the

20-digit code, for example

12345678919876543210, and send

to +44 7786 200276.

Authenticate hologram

When looking at the hologram on

the label, you should see the Nokia

connecting hands symbol from

one angle and the Nokia Original

Enhancements logo when looking

from another angle.

National and international operator chargers will apply.

You should receive a message indicating whether the code

can be authenticated.

What if your battery is not authentic?

When you angle the hologram

left, right, down, and up, you

should see 1, 2, 3, and 4 dots on

each side respectively.

If you cannot confirm that your Nokia battery with the

hologram on the label is an authentic Nokia battery, please do

not use the battery. Take it to the nearest authorized Nokia

service point or dealer for assistance. The use of a battery that

is not approved by the manufacturer may be dangerous and

may result in poor performance and damage to your device

and its enhancements. It may also invalidate any approval or

warranty applying to the device.

Scratch the side of the label to

reveal a 20-digit code, for example

12345678919876543210. Turn

the battery so that the numbers

are facing upwards. The 20-digit

code reads starting from the

number at the top row followed by

the bottom row.

To find out more about original Nokia batteries, visit

www.nokia.com/battery.

123

Care and maintenance

Your device is a product of superior design and craftsmanship

and should be treated with care. The suggestions below will

help you protect your warranty coverage.

attachments could damage the device and may violate

regulations governing radio devices.

Use chargers indoors.

Always create a backup of data you want to keep (such as

contacts and calendar notes) before sending your device to

a service facility.

•

Keep the device dry. Precipitation, humidity and all types

of liquids or moisture can contain minerals that will

corrode electronic circuits. If your device does get wet,

remove the battery and allow the device to dry completely

before replacing it.

All of the above suggestions apply equally to your device,

battery, charger, or any enhancement. If any device is not

working properly, take it to the nearest authorized service

facility for service.

•

Do not use or store the device in dusty, dirty areas. Its

moving parts and electronic components can be damaged.

Do not store the device in hot areas. High temperatures

can shorten the life of electronic devices, damage

batteries, and warp or melt certain plastics.

•

Do not store the device in cold areas. When the device

returns to its normal temperature, moisture can form

inside the device and damage electronic circuit boards.

Do not attempt to open the device other than as

instructed in this guide.

Do not drop, knock, or shake the device. Rough handling

can break internal circuit boards and fine mechanics.

Do not use harsh chemicals, cleaning solvents, or strong

detergents to clean the device.

Do not paint the device. Paint can clog the moving parts

and prevent proper operation.

Use a soft, clean, dry cloth to clean any lenses (such as

camera, proximity sensor, and light sensor lenses).

Use only the supplied or an approved replacement

antenna. Unauthorised antennas, modifications, or

•

124

Additional safety information

Operating environment

Medical devices

Remember to follow any special regulations in force in any

area and always switch off your device when its use is

prohibited or when it may cause interference or danger. Use

the device only in its normal operating positions. This device

meets RF exposure guidelines when used either in the normal

use position against the ear or when positioned at least 1.5 cm

(5/8 in) away from the body. When a carry case, belt clip or

holder is used for body-worn operation, it should not contain

metal and should position the device the above-stated

distance from your body.

Operation of any radio transmitting equipment, including

wireless phones, may interfere with the functionality of

inadequately protected medical devices. Consult a physician

or the manufacturer of the medical device to determine if

they are adequately shielded from external RF energy or if you

have any questions. Switch off your device in health care

facilities when any regulations posted in these areas instruct

you to do so. Hospitals or health care facilities may be using

equipment that could be sensitive to external RF energy.

Pacemakers Pacemaker manufacturers recommend that a

minimum separation of 15.3 cm (6 in) be maintained between

a wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations are

consistent with the independent research by and

recommendations of Wireless Technology Research. Persons

with pacemakers should:

In order to transmit data files or messages, this device requires

a good quality connection to the network. In some cases,

transmission of data files or messages may be delayed until

such a connection is available. Ensure the above separation

distance instructions are followed until the transmission is

completed.

Parts of the device are magnetic. Metallic materials may be

attracted to the device, and persons with a hearing aid should

not hold the device to the ear with the hearing aid. Do not

place credit cards or other magnetic storage media near the

device, because information stored on them may be erased.

•

always keep the device more than 15.3 cm (6 in) from their

pacemaker;

not carry the device in a breast pocket; and

hold the device to the ear opposite the pacemaker to

minimise the potential for interference.

•

If you suspect interference, switch off your device and move

the device away.

125

of the aircraft, disrupt the wireless telephone network, and

may be illegal.

Hearing aids Some digital wireless devices may interfere

with some hearing aids. If interference occurs, consult your

service provider.

Potentially explosive environments

Vehicles

Switch off your device when in any area with a potentially

explosive atmosphere and obey all signs and instructions.

Potentially explosive atmospheres include areas where you

would normally be advised to turn off your vehicle engine.

Sparks in such areas could cause an explosion or fire resulting

in bodily injury or even death. Switch off the device at

refuelling points such as near gas pumps at service stations.

Observe restrictions on the use of radio equipment in fuel

depots, storage, and distribution areas, chemical plants or

where blasting operations are in progress. Areas with a

potentially explosive atmosphere are often but not always

clearly marked. They include below deck on boats, chemical

transfer or storage facilities, vehicles using liquefied

petroleum gas (such as propane or butane), and areas where

the air contains chemicals or particles such as grain, dust or

metal powders.

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles such as

electronic fuel injection systems, electronic antiskid (antilock)

braking systems, electronic speed control systems, air bag

systems. For more information, check with the manufacturer

or its representative of your vehicle or any equipment that has

been added.

Only qualified personnel should service the device, or install

the device in a vehicle. Faulty installation or service may be

dangerous and may invalidate any warranty that may apply to

the device. Check regularly that all wireless device equipment

in your vehicle is mounted and operating properly. Do not

store or carry flammable liquids, gases, or explosive materials

in the same compartment as the device, its parts, or

enhancements. For vehicles equipped with an air bag,

remember that air bags inflate with great force. Do not place

objects, including installed or portable wireless equipment in

the area over the air bag or in the air bag deployment area. If

in-vehicle wireless equipment is improperly installed and the

air bag inflates, serious injury could result.

Emergency calls

Important: Wireless phones, including this device,

operate using radio signals, wireless networks, landline

networks, and user-programmed functions. Because of this,

connections in all conditions cannot be guaranteed. You

should never rely solely on any wireless device for essential

communications like medical emergencies.

Using your device while flying in aircraft is prohibited. Switch

off your device before boarding an aircraft. The use of wireless

teledevices in an aircraft may be dangerous to the operation

126

The exposure guidelines for mobile devices employ a unit of

measurement known as the Specific Absorption Rate or SAR.

The SAR limit stated in the ICNIRP guidelines is 2.0 watts/

kilogram (W/kg) averaged over 10 grams of tissue. Tests for

SAR are conducted using standard operating positions with

the device transmitting at its highest certified power level in

all tested frequency bands. The actual SAR level of an

operating device can be below the maximum value because

the device is designed to use only the power required to reach

the network. That amount changes depending on a number of

factors such as how close you are to a network base station.

The highest SAR value under the ICNIRP guidelines for use of

the device at the ear is 0.48 W/kg.

To make an emergency call:

1 If the device is not on, switch it on. Check for adequate

signal strength.

Some networks may require that a valid SIM card is

properly inserted in the device.

Press

as many times as needed to clear the display

and ready the device for calls.

Enter the official emergency number for your present

location. Emergency numbers vary by location.

Press the

key.

When making an emergency call, give all the necessary

information as accurately as possible. Your wireless device

may be the only means of communication at the scene of an

accident. Do not end the call until given permission to do so.

Use of device accessories and enhancements may result in

different SAR values. SAR values may vary depending on

national reporting and testing requirements and the network

band. Additional SAR information may be provided under

product information at www.nokia.com.

Warning: In the offline profile you cannot make (or

receive) any calls, except make calls to certain emergency

numbers, or use other features that require network

coverage.

Your mobile device is also designed to meet the requirements

for exposure to radio waves established by the Federal

Communications Commission (USA) and Industry Canada.

These requirements set a SAR limit of 1.6 W/kg averaged over

1 gram of tissue. The highest SAR value reported under this

standard during product certification for use at the ear is 0.74

W/kg and when properly worn on the body is 0.58 W/kg.

Information about this device model can be found at http://

www.fcc.gov/oet/fccid by searching the equipment

Certification information (SAR)

This mobile device meets guidelines for exposure to radio

waves.

Your mobile device is a radio transmitter and receiver. It is

designed not to exceed the limits for exposure to radio waves

recommended by international guidelines. These guidelines

were developed by the independent scientific organization

ICNIRP and include safety margins designed to assure the

protection of all persons, regardless of age and health.

authorization system using FCC ID: QEYRM-43.

127

bookmarks 84

brightness, adjusting display 102

video recorder sett ings 58

CD-ROM 94

Index

access points 103

creating 104

settings 104

activation keys 117

alarms

alarm clock 15

calendar 80

Anykey answer 103

applications

installing 114

Java 114

certificates 109

chat

cache, clearing 87

calendar

See instant messaging

clear screen

See standby mode

clock 15

alarm 15

settings 15

codecs 26

codes 107

lock code

alarm 79

creating entries 79

synchronising PC Suite 79

call register

See log

calls

dialled numbers 74

duration 74

international 31

received 74

PIN code 108

PIN2 code 108

security code 108

computer connections 94

conference call 31

Connection manager 94

connection settings 103

contact cards 35

inserting pictures 35

sending 35

storing DTMF tones 34

copying

settings 102

audio

file formats 18

audio file formats 18

settings for call divert 110

transferring 33

Camera 54

camera

bitrates 26

adjusting lighting and colour 54,

Bluetooth 90

connecting two devices, pairing 92

device address 92

headset 111

55, 57

image setup settings 55

saving video clips 57

self-timer 55

pairing 92

security 91

switching off 93

contacts between the SIM card and

device memory 36

text 41

sending images 54

sequence mode 54

still image camera settings 55

128

see activation keys

cutting text 41

.jar 114, 115

.sis 114

Music player 18

RealOne Player 60

connecting to a server 65

groups 68

recording messages 67

sending instant messages 66

file manager 16

fixed dialing 36

FM radio 62

Internet

data connections

details 95

See Web

Internet access points (IAP)

See access points

ending 95

indicators 13

date 15

defragmenting 116

digital rights management, DRM

see activation keys

DNS, domain name service, glossary

explanation 105

Download! 89

formatting 116

IP address, glossary explanation 105

gallery

adding files to album 59

creating new album 59

presentations 59

Java

See applications

viewing images and videos 59

Kbps 26

handsfree

see loudspeaker

hard drive

defragmenting 116

formatting 116

scanning 116

headset settings 111

help application 14

lock code 108

log

e-mail 42

automatic retrieving 47

offline 47

opening 46

remote mailbox 45

retrieving from mailbox 46

settings 51

clearing 120

erasing contents 75

filtering 75

log duration 75

loudspeaker 16

viewing attachments 46

mailbox 45

automatic retrieving 47

media files

indicators 13

instant messaging 65

blocking 67

file formats

.jad 114

file formats 18, 60

129

memory

clearing 74

son gs 26

packet data connections

GPRS, glossary explanation 103

settings 107

viewing memory consumption 12,

security code

See lock code

sending

contact cards, business cards 35

images 54

service commands 39

settings

116

Messaging 38

messaging

e-mail 42

multimedia messages 42

text messages 42

multimedia messages 42

music

pasting text 41

PC connections

via Bluetooth or USB cable 94

PC Suite

calendar data 79

synchronisation 94

transferring images to a PC 58

transferring media files 12

viewing phone memory data 17

personalization 29

phonebook

See contact cards

PIN code 108

profiles 28

access codes 107

access points 104

Bluetooth connection 91

calendar 80

call barring 111

call diverting 110

certificates 109

data connections 103

date and time 107

display 102

album art 26

as ringtones 26

details 25

file formats 18

transfering 20

visualization 26

Music player 18

controls 18

equalizer 19

file formats 18

indicators 19

headset 111

radio 62

IM 65, 69

reminder

language 101

See calendar, alarm

remote mailbox 45

remote SIM mode 91

ringing tones

personal ringing tone 37

receiving in a text message 45

ringtones

options 24

lock code 108

play modes 19

music player

playlists 22

Music shop 20

original settings 101

personalizing the phone 28

PIN code 108

screen saver 102

UPIN code 108

130

UPUK code 109

shortcuts

Web connection 84

SIM card

adding ne w 49

text messages 42

themes 29

loudspeaker 16

Web

time 15

access points, see access points

browser 84

wireless LAN 95

access point settings 106

create IAP 96

create IAP 12

copying names and numbers to

phone 36

messages 48

UPIN code 108

UPUK code 109

USB cable 94

USSD commands 39

names and numbers 36

sis file 114

SMS centre, short message service

centre 49

snooze 15

software

transferring a file to your device

114

songs

VBR 26

video clips 58

video player

See RealOne Player

Visual Radio 62

viewing content 63

visual service ID 63

voice commands 113

voice dialling 32

voice mailbox 31

changing the phone number 31

diverting calls to voice mailbox 110

voice messages 31

voice tags 113

as ringtones 26

file formats 18

sound clips 58

sounds

muting a ringing tone 33

recording sounds 62

speed dialling 32

standby mode 28

svg files 59

making calls 32

volume control 16

during a call 31

synchronisation 97

text message service centre

131

Technicolor Thomson TM9235 EN User Manual
Sony Mobile Xperia tipo 1264 0775 User Manual
Sony Ericsson S500C User Manual
Sony Ericsson K220C User Manual
Samsung SGH S308 User Manual
Samsung Cell Phone SGH i700 User Manual
Raymarine RAY220 User Manual
Philips SA3104 User Manual
Philips AZ3856 User Manual
Pantech Matrix Pro User Manual