Nokia GOLD ARTE 8800 User Manual

User guide

9232467

Issue 3

Java is a trademark of Sun Microsystems, Inc.

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and

noncommercial use in connection with information which has been encoded in compliance with the

MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use

in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be

implied for any other use. Additional information including that relating to promotional, internal and

commercial uses may be obtained from MPEG LA, LLC. See http://www.mpegla.com.

Nokia operates a policy of continuous development. Nokia reserves the right to make changes and

improvements to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special,

incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of

any kind, either express or implied, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or

contents of this document. Nokia reserves the right to revise this document or withdraw it at any time

without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to

you.

Export Controls

This device may contain commodities, technology or software subject to export laws and regulations from

the US and other countries. Diversion contrary to law is prohibited.

9232467/Issue 3

Contents

For your safety ..................................................................................................... 9

General information.......................................................................................... 13

Your Nokia 8800 package...................................................................................................................... 13

Overview of functions............................................................................................................................. 14

Access codes.............................................................................................................................................. 14

Security code.......................................................................................................................................... 14

PIN codes................................................................................................................................................. 15

PUK codes................................................................................................................................................ 15

Barring password .................................................................................................................................. 15

Wallet code............................................................................................................................................. 16

Configuration settings service.............................................................................................................. 16

Downloading content and applications............................................................................................. 17

Nokia Care Premium Service................................................................................................................. 17

Nokia support on the Web..................................................................................................................... 19

1.Getting started .............................................................................................. 20

Install the SIM card and the battery................................................................................................... 20

Charge the battery................................................................................................................................... 21

DT-8 Desk stand .................................................................................................................................... 22

Switch the phone on and off................................................................................................................ 23

Open the keypad....................................................................................................................................... 24

Normal operating position..................................................................................................................... 24

2.Your phone..................................................................................................... 25

Keys and parts........................................................................................................................................... 25

Standby mode............................................................................................................................................ 27

Shortcuts in the standby mode......................................................................................................... 28

Power saving .......................................................................................................................................... 28

Indicators................................................................................................................................................. 28

Keypad lock (keyguard)........................................................................................................................... 29

3.Call functions ................................................................................................ 31

Make a call................................................................................................................................................. 31

Speed dialing............................................................................................................................................. 32

Answer or reject a call............................................................................................................................ 32

Call waiting............................................................................................................................................. 32

Options during a call............................................................................................................................... 33

4.Write text....................................................................................................... 34

Settings ....................................................................................................................................................... 34

Predictive text input................................................................................................................................ 34

Writing compound words................................................................................................................... 35

Traditional text input .............................................................................................................................. 35

5.Navigate the menus ...................................................................................... 36

Access a menu function ......................................................................................................................... 36

6.Menu functions............................................................................................. 37

Messages..................................................................................................................................................... 37

Text messages (SMS)............................................................................................................................ 37

Multimedia messages (MMS)............................................................................................................ 40

Folders...................................................................................................................................................... 44

Instant messages (IM).......................................................................................................................... 44

E-mail application ................................................................................................................................ 50

Voice messages...................................................................................................................................... 52

Info messages......................................................................................................................................... 53

Service commands................................................................................................................................ 53

Delete messages.................................................................................................................................... 53

Message settings................................................................................................................................... 54

Message counter................................................................................................................................... 57

Contacts...................................................................................................................................................... 57

Search for a contact............................................................................................................................. 57

Save names and phone numbers...................................................................................................... 58

Save numbers, items, or an image ................................................................................................... 58

Copy contacts......................................................................................................................................... 59

Edit contact details .............................................................................................................................. 59

Delete contacts or contact details................................................................................................... 59

Business cards........................................................................................................................................ 60

My presence............................................................................................................................................ 60

Subscribed names ................................................................................................................................. 61

Settings.................................................................................................................................................... 63

Groups...................................................................................................................................................... 63

Speed dialing.......................................................................................................................................... 63

Voice dialing........................................................................................................................................... 64

Info, service, and my numbers........................................................................................................... 65

Call register................................................................................................................................................ 66

Recent calls lists.................................................................................................................................... 66

Counters and timers............................................................................................................................. 66

Positioning information ...................................................................................................................... 67

Settings...................................................................................................................................................... 67

Profiles ..................................................................................................................................................... 67

Themes ..................................................................................................................................................... 68

Tones......................................................................................................................................................... 68

Display...................................................................................................................................................... 69

Time and date......................................................................................................................................... 69

My shortcuts........................................................................................................................................... 70

Connectivity............................................................................................................................................ 71

Call ............................................................................................................................................................ 76

Phone........................................................................................................................................................ 77

Enhancement.......................................................................................................................................... 78

Configuration......................................................................................................................................... 79

Security.................................................................................................................................................... 80

Restore factory settings...................................................................................................................... 81

Operator menu.......................................................................................................................................... 82

Gallery.......................................................................................................................................................... 82

Media........................................................................................................................................................... 83

Camera..................................................................................................................................................... 84

Media player........................................................................................................................................... 84

Music player ........................................................................................................................................... 85

Radio......................................................................................................................................................... 87

Recorder................................................................................................................................................... 89

Equalizer.................................................................................................................................................. 90

Organiser..................................................................................................................................................... 90

Alarm clock............................................................................................................................................. 90

Calendar................................................................................................................................................... 91

To-do list ................................................................................................................................................. 92

Notes......................................................................................................................................................... 93

Wallet....................................................................................................................................................... 93

Calculator................................................................................................................................................ 97

Countdown timer.................................................................................................................................. 98

Stopwatch............................................................................................................................................... 99

Applications ............................................................................................................................................ 100

Games.................................................................................................................................................... 100

Collection ............................................................................................................................................. 100

Web ........................................................................................................................................................... 102

Set up browsing.................................................................................................................................. 103

Connect to a service.......................................................................................................................... 103

Browse pages ...................................................................................................................................... 104

Appearance settings.......................................................................................................................... 105

Cookies.................................................................................................................................................. 106

Scripts over secure connection...................................................................................................... 106

Bookmarks............................................................................................................................................ 107

Download files .................................................................................................................................... 108

Service inbox....................................................................................................................................... 108

Cache memory .................................................................................................................................... 109

Browser security................................................................................................................................. 109

SIM services............................................................................................................................................ 112

7.PC connectivity............................................................................................ 113

PC Suite.................................................................................................................................................... 113

Packet data, HSCSD, and CSD............................................................................................................ 113

Data communication applications.................................................................................................... 114

8.Battery information..................................................................................... 115

Charging and discharging................................................................................................................... 115

Nokia battery authentication guidelines........................................................................................ 116

CARE AND MAINTENANCE............................................................................. 119

Additional safety information........................................................................ 121

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the

complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or when it

may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while

driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could affect

performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELING

Do not use the phone at a refueling point. Do not use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Do

not touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible

products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all important

information stored in your phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety

instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press the end key as many times

as needed to clear the display and return to the start screen. Enter the

emergency number, then press the call key. Give your location. Do not end the

call until given permission to do so.

■ About your device

The wireless device described in this guide is approved for use on the EGSM 900, GSM 1800,

and GSM 1900 networks. Contact your service provider for more information about

networks.

Your product represents superior design and craftsmanship, and comes with stainless steel

covers and a glass display treated for scratch resistance. Therefore, handle your phone with

due care.

When using the features in this device, obey all laws and respect the privacy and legitimate

rights of others.

Warning: To use any features in this device, other than the alarm clock, the device

must be switched on. Do not switch the device on when wireless device use may

cause interference or danger.

■ Network services

To use the phone you must have service from a wireless service provider. Many of the

features in this device depend on features in the wireless network to function. These

network services may not be available on all networks or you may have to make specific

arrangements with your service provider before you can utilize network services. Your

service provider may need to give you additional instructions for their use and explain what

charges will apply. Some networks may have limitations that affect how you can use

network services. For instance, some networks may not support all language-dependent

characters and services.

Your service provider may have requested that certain features be disabled or not activated

in your device. If so, they will not appear on your device menu. Your device may also have

been specially configured. This configuration may include changes in menu names, menu

order and icons. Contact your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some

features of this device, such as text messages, multimedia messages, instant messages, e-

mail, presence enhanced contacts, mobile Internet services, content and application

downloads, and synchronization with remote Internet server, require network support for

these technologies.

■ Shared memory

The following features in this device may share memory: contacts, text and instant

messages, e-mail, voice tags, calendar, to-do notes, Java^TMgames and applications, and note

application. Use of one or more of these features may reduce the memory available for the

remaining features sharing memory. For example, saving many Java applications may use all

of the available memory. Your device may display a message that the memory is full when

you try to use a shared memory feature. In this case, delete some of the information or

entries stored in the shared memory features before continuing. Some of the features, such

as Java applications, may have a certain amount of memory specially allotted to them in

addition to the memory shared with other features.

Note that gallery files share a different memory. For further information see Gallery on

page 82.

■ Enhancements

A few practical rules about accessories and enhancements:

•

Keep all accessories and enhancements out of the reach of small children.

When you disconnect the power cord of any accessory or enhancement, grasp and pull

the plug, not the cord.

•

Check regularly that enhancements installed in a vehicle are mounted and are operating

properly.

Installation of any complex car enhancements must be made by qualified personnel only.

General information

■ Your Nokia 8800 package

In your package you will find

• Your Nokia 8800 phone

• Two batteries BL-5X

• Charger ACP-12

• Deskstand DT-8

• Wired headset HS-15

• Carrying pouch CP-35

• User guide

• Story booklet

• CD-ROM

The items supplied with your phone and available enhancements may be different,

depending on your region or service provider. If your package does not include all

the listed items above, please contact your retailer.

Before you can use your phone, you need to insert the SIM card, and insert and

charge the battery. See Install the SIM card and the battery, page 20.

■ Overview of functions

Your phone provides many functions that are practical for daily use, such as a

calendar, a clock, an alarm clock, a radio, a music player, and a built-in camera.

Your phone also supports the following functions:

• Enhanced Data rates for GSM Evolution (EDGE), see Packet data (EGPRS),

page 73.

• Extensible hypertext markup language (XHTML), see Web, page 102.

• E-mail application, see E-mail application, page 50.

• Presence-enhanced contacts, see My presence, page 60.

• Java 2 Micro Edition (J2ME^TM), see Applications, page 100.

• Bluetooth technology, see Bluetooth wireless technology, page 71.

• Synchronization of data from another phone without having a SIM card

inserted, see Data transfer with a compatible device, page 75.

• Plug and play online service to get the configuration settings, see Switch the

phone on and off, page 23, and Configuration, page 79.

■ Access codes

Security code

The security code (5 to 10 digits) helps to protect your phone against

unauthorized use. The preset code is 12345. To change the code, and to set the

phone to request the code, see Security, page 80.

PIN codes

The PIN (personal identification number) code and the UPIN (universal personal

identification number) code (4 to 8 digits) help to protect your SIM card against

unauthorized use. See Security, page 80.

The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for

some functions.

The module PIN is required to access the information in the security module. See

Security module, page 110.

The signing PIN is required for the digital signature. See Digital signature,

page 111.

PUK codes

The PUK (personal unblocking key) code and the UPUK (universal personal

unblocking key) code (8 digits) is required to change a blocked PIN code and UPIN

code, respectively. The PUK2 code (8 digits) is required to change a blocked PIN2

code.

Barring password

The barring password (4 digits) is required when using the Call barring service.

See Security, page 80.

Wallet code

The wallet code (4 to 10 digits) is required to access the wallet services. For further

information, see Wallet, page 93.

■ Configuration settings service

To use some of the network services, such as mobile Internet services, MMS, or

remote Internet server synchronization, your phone needs the correct

configuration settings. You may be able to receive the settings directly as a

configuration message. After receiving the settings you need to save them on your

phone. The service provider may provide a PIN that is needed to save the settings.

For more information on availability, contact your network operator, service

provider, nearest authorized Nokia dealer, or visit the support area on the Nokia

website, www.nokia.com/support.

When you have received a configuration message Configuration settings

received is displayed.

To save the settings, select Show > Save. If the phone requests Enter settings'

PIN:, enter the PIN code for the settings, and select OK. To receive the PIN code,

contact the service provider that supplies the settings. If no settings are saved yet,

these settings are saved and set as default configuration settings. Otherwise, the

phone asks Activate saved configuration settings?.

To discard the received settings, select Exit, or Show > Discard.

To edit the settings, see Configuration, page 79.

■ Downloading content and applications

You may be able to download new content (for example themes, tones, and video

clips) to the phone (network service). Select the download function (for example,

in the Gallery menu). To access the download function, see the respective menu

descriptions. For the availability of different services, pricing, and tariffs, contact

your service provider.

Important: Use only services that you trust and that offer adequate security and

protection against harmful software.

■ Nokia Care Premium Service

As Nokia 8800 phone owner, you are entitled to Nokia Care Premium Service. This

includes the following (in selected countries*):

• 24-month warranty** for your Nokia 8800 phone

• Priority service** at selected Nokia service points during 24 months from the

purchase of your Nokia 8800 phone. Check www.nokia.com or your local Nokia

Web site for details of the selected Nokia service points.

• Unparalleled Nokia contact center support at local rate during 24 months from

the purchase of your Nokia 8800 phone. For your local Nokia contact number,

check the following list.

Country

Austria

Belgium

Nokia contact Operating

number hours

Country

Nokia contact Operating

number hours

0810 281 900 Mon-Sat

9-21

Luxembourg 034 2080 8193 Mon-Fri

9-21

070 70 77 70

Mon-Fri

9-21

Malta

0574 519334

Mon-Fri

9-21

Czech

Republic

841 114 455

Mon-Fri

9-18

Netherlands 0900 202 60 55 Mon-Fri

9-21

Cyprus

210 6142 844 Mon-Fri

8-17

Norway

Poland

Portugal

Romania

Russia

815 222 15

Mon-Fri

9-21

Denmark 72 29 29 16

Mon-Fri

9-21

022 654 00 43 Mon-Fri

9-18

Estonia

Finland

France

611 9901

Mon-Fri

9-17

808 780 780

Mon-Fri

9-18

0203 23456

Mon-Fri

9-21

021 407 7505

Mon-Fri

9-18

08 11 00 45 67 Mon-Fri

9-21

7095 7272222 Mon-Fri

8-20

Germany 0180 501 502 0 Mon-Fri

9-21

Slovakia

Spain

0850 111 561

Mon-Fri

9-18

Greece

210 6142 844 Mon-Fri

8-17

902 404 414

Mon-Fri

9-21,

Sat 9-16

Hungary

06 40 505 505 Mon-Fri

9-18

Sweden

0771 210 200

Mon-Fri

9-21

Country

Ireland

Italy

Nokia contact Operating

number hours

Country

Nokia contact Operating

number

hours

1890 946 245 Mon-Fri

9-21

Switzerland 0848 100010

Mon-Sat

9-21

848 690 691

Mon-Fri

9-21

Turkey

0 212 337 17 17 Mon-Sun

9-18

Latvia

7320603

Mon-Fri

9-17

0870 600 6012 Mon-Fri

9-21

Lithuania 1553

Mon-Fri

9-17

Ukraine

8 800 50 101 50 Mon-Sun

9-20

*Services may vary for each country. Check www.nokia.com or your local Nokia Web site for

details.

**Based on Nokia end-user warranty terms. In Europe, Middle East, and Africa area, a 24

month warranty is applicable in the following countries: European Union member states,

Iceland, Norway, Switzerland, Turkey, Romania, Russia, Ukraine, Kazakhstan, Belarus,

Moldavia, Georgia, Mongolia, Azerbaijan, Israel, Croatia, Bulgaria, Serbia and Montenegro,

Macedonia, Bosnia and Herzegovina.

■ Nokia support on the Web

Check www.nokia.com/support or your local Nokia Web site for the latest version

of this guide, additional information, downloads, and services related to your

Nokia product.

1. Getting started

■ Install the SIM card and the battery

Always switch the device off and disconnect the charger before removing the battery.

Keep all SIM cards out of the reach of small children. For availability and information on

using SIM card services, contact your SIM card vendor. This may be the service provider,

network operator, or other vendor.

This device is intended for use with BL-5X battery.

The SIM card and its contacts can easily be damaged by scratches or bending, so

be careful when handling, inserting, or removing the card.

To remove the back cover of the phone push the

sideways release buttons (1) and slide the back

cover to remove it from the phone (2).

Remove the battery as shown (3).

Insert the SIM card (4). Make sure that the SIM

card is properly inserted, and that the golden

contact area on the card is facing downwards.

Replace the battery (5).

Observe the battery contacts.

Always use original Nokia

batteries. See Nokia battery

authentication guidelines,

page 116.

Slide the back cover into its

place (6).

■ Charge the battery

Warning: Use only batteries, chargers, and enhancements approved by Nokia for

use with this particular model. The use of any other types may invalidate any

approval or warranty, and may be dangerous.

Check the model number of any charger before use with this device. This device is intended

for use when supplied with power from ACP-12.

For availability of approved enhancements, please check with your dealer.

Connect the lead from the charger to the

socket at the bottom of your phone.

Connect the charger to a wall socket.

If the battery is completely discharged, it

may take a few minutes before the charging

indicator appears on the display or before

any calls can be made.

The charging time depends on the charger and the battery used. For example,

charging a BL-5X battery with the ACP-12 charger takes approximately 1 hour

and 5 minutes while the phone is in the standby mode.

DT-8 Desk stand

The desk stand allows charging of the phone battery, and a spare battery that may

be included in the sales package. It can be supplied with power from the AC-1 or

ACP-12 charger. The spare battery is charged if the phone is not inserted, or if the

battery in the phone is fully charged. The charge level of the phone battery is

shown on the display of the phone.

The blue light indicator shows the charging status of the spare battery and has the

following functionality:

• The light indication is breathing blue when the desk stand is empty, or when

only the phone is inserted (phone battery is either fully charged, or being

charged), or when both, the phone and the spare battery, are inserted, and

spare battery is fully charged.

• Constant blue light indicates that the inserted spare battery is not fully

charged. If the phone is inserted, the spare battery is only being charged when

the phone battery is fully charged.

• The light indicator can be turned off by pressing the switch on the back of the

desk stand. To turn the light indicator on again, press the switch.

• If the light indication is off without pressing the switch, the reason might be

one of the following: a non-compatible charger is used or the spare battery

temperature is too high. Check the compatibility of the charger and use only

compatible Nokia chargers. If the spare battery temperature is too high, it is

not being charged. When the temperature of the spare battery is back to

normal, charging starts and the light indication turns on again.

■ Switch the phone on and off

Warning: Do not switch the phone on when wireless phone use is prohibited or

when it may cause interference or danger.

Press and hold the power key as shown.

If the phone asks for a PIN or a UPIN code, enter the code (for

example, displayed as ****), and select OK.

When you switch on your phone for the first time, and the phone is

in standby mode, page 27, you will be asked to get the

configuration settings from your service provider (network service). Confirm or

decline the query. See Connect to service provider support, page 80, and

Configuration settings service, page 16.

■ Open the keypad

To open the keypad, slide the phone as shown.

■ Normal operating position

Use the device only in its normal operating position.

Your device has an internal antenna.

Note: As with any other radio transmitting

device, do not touch the antenna unnecessarily when the device is switched on.

Contact with the antenna affects call quality and may cause the device to operate

at a higher power level than otherwise needed. Avoiding contact with the antenna

area when operating the device optimises the antenna performance and the

battery life.

2. Your phone

■ Keys and parts

• Power key (1)

• Loudspeaker (2)

• Earpiece (3)

• Left selection key (4)

Right selection key (5)

Middle selection key (6)

The function of the selection key depends on the

guiding text shown on the display above the key.

• 4-way navigation key (7)

Scroll up and down, left and right.

• Call key (8) to dial a phone number and answer a

call

• End key (9) to end an active call and exit from any

function

• Battery cover release buttons (10)

• Microphone (11)

• Charger connector (12)

• Enhancements connector (13)

• Camera lens (14)

• Headset HS-15, rotating clip

■ Standby mode

When the phone is ready for use, and you have not entered any characters, the

phone is in the standby mode.

• Name of the network or the operator logo (1)

• Signal strength of the cellular network at your current

location (2)

• Battery charge level (3)

• Left selection key is Go to (4). To view the functions in

the personal shortcut list, select Go to.

To activate a function select it.

To view a list with available functions, select Options > Select options. To add

a function to the shortcut list, select Mark. To remove a function from the list,

select Unmark.

To rearrange the functions on your personal shortcut list, select Options >

Organise. Select the desired function and Move and the place where you want

to move the function.

• Middle selection key is Menu (5)

• Right selection key is Names (6) to access the Names menu or another

shortcut to a function that you selected. See My shortcuts, page 70. Operator

variants may have an operator-specific name to access an operator specific

Web site.

Shortcuts in the standby mode

• To access the list of dialled numbers, press the call key once. Scroll to the

number or name that you want and to call the number: press the call key.

• To open the web browser, press and hold 0.

• To call your voice mailbox, press and hold 1.

• Use the navigation key as a shortcut. See My shortcuts, page 70.

• To change the profile, open the list of profiles: briefly press the power key, and

select the desired profile from the list.

Power saving

A digital clock view overwrites the display when no function of the

phone has been used for a certain period of time. To activate the

power saving, see Power saver in Display, page 69. To deactivate

the screen saver, press any key.

Indicators

You received one or several text or picture messages. See Read and reply

to an SMS message, page 39.

You received one or several multimedia messages. See Read and reply to a

multimedia message, page 42.

The phone registered a missed call. See Call register, page 66.

The keypad is locked. See Keypad lock (keyguard), page 29.

The phone does not ring for an incoming call or text message when

Incoming call alert is set to Off and Message alert tone is set to Off. See

Tones, page 68.

The alarm clock is set to On. See Alarm clock, page 90.

When the packet data connection mode Always online is selected and the

packet data service is available, the indicator is shown. Refer to Packet

data (EGPRS), page 73.

A packet data connection is established. Refer to Packet data (EGPRS),

page 73 and Browse pages, page 104.

The packet data connection is suspended (on hold), for example if there is

an incoming or outgoing call during a packet data dial-up connection.

Bluetooth connection indicator. See Bluetooth wireless technology,

page 71.

■ Keypad lock (keyguard)

You can lock the keypad to prevent accidental keypresses.

• To lock the keypad and the power key, close the slide, and press the left

selection key (Lock) to confirm; or select Menu and press * within 3.5 seconds.

• To unlock the keypad, open the slide; or select Unlock, and press * within 1.5

seconds. If the Security keyguard is set On, enter the security code if

requested.

To answer a call when the keyguard is on, press the call key. When you end or

reject the call, the keypad is automatically locked.

For Automatic keyguard and Security keyguard, see Phone, page 77.

When the keyguard is on, calls still may be possible to the official emergency number

programmed into your device.

3. Call functions

■ Make a call

1. Enter the phone number, including the area code. To delete an incorrect

character, select Clear.

For international calls, press * twice for the international prefix (the +

character replaces the international access code) and then enter the country

code, the area code without the leading 0, if necessary, and the phone number.

2. To call the number, press the call key.

3. To end the call or to cancel the call attempt, press the end key, or close the

slide.

Make a call using names

To search for a name or phone number that you have saved in Contacts, see

Search for a contact, page 57. Press the call key to call the number.

Last number redialing

To access the list of up to 20 numbers you last called or attempted to call, press

the call key once in standby mode. To call the number, select a number or name,

and press the call key.

■ Speed dialing

Assign a phone number to one of the speed-dialing keys, 2 to 9. See Speed dialing,

page 63. Call the number in either of the following ways:

• Press a speed-dialing key and then press the call key.

• If Speed dialling is set to On, press and hold a speed-dialing key until the call is

started. See Speed dialling in Call, page 76.

■ Answer or reject a call

To answer an incoming call, press the call key, or open the slide. To end the call,

press the end key, or close the slide.

To reject an incoming call when the slide is open, press the end key.

To mute the ringing tone, select Silence. Then either answer or reject the call.

Tip: If the Divert if busy function is activated to divert the calls, for

example, to your voice mailbox, rejecting an incoming call will also divert

the call. See Call, page 76.

If a compatible headset supplied with the headset key is connected to the phone,

to answer and end a call, press the headset key.

Call waiting

To answer the waiting call during an active call, press the call key. The first call is

put on hold. To end the active call, press the end key.

To activate the Call waiting function, see Call, page 76.

■ Options during a call

Many of the options that you can use during a call are network services. For

availability, contact your network operator or service provider.

To increase or decrease the volume during a call, press the navigation key right or

left.

For some of the following options, select Options during a call:

Muteor Unmute, Contacts, Menu, Record, Lock keypad, Loudspeaker or

Handset, and the network services Hold or Unhold, Answer and Reject, New call,

Send DTMF(to send tone strings), Swap (to switch between the active call and

the call on hold), Transfer (to connect a call on hold to an active call and

disconnect yourself), Conference (to make a conference call that allows up to five

persons to take part in a conference call), Add to conference, Private call (to

discuss privately in a conference call), End call, End all calls.

Note: Do not hold the device near your ear when the loudspeaker is in use, because

the volume may be extremely loud.

4. Write text

You can enter text, for example, when writing messages, using traditional or

predictive text input. When using traditional text input, press a number key, 1 to

9, repeatedly until the desired character appears. In predictive text input you can

enter a letter with a single keypress

When you write text,

predictive text input, and

appears at the top left of the display, indicating

appears, indicating traditional text input.

, or

appears next to the text input indicator, indicating the character

indicates number mode. To

case. To change the character case, press #.

change from the letter to number mode, press and hold #, and select Number

mode.

■ Settings

To set the writing language to a language other than that selected in Phone

language, page 77, select Options > Writing language. Predictive text input is

only available for the languages on the list.

To set the predictive text input option, select Options > Dictionary on, or to set

traditional text input option select Options > Dictionary off.

■ Predictive text input

Predictive text input allows you to write text quickly using the phone keypad and

a built-in dictionary.

1. Start writing a word using the keys 2 to 9. Press each key only once for a single

letter. The word changes after each keystroke.

2. When you finish writing the word and it is correct, to confirm it by adding a

space, press 0.

If the word is not correct, press * repeatedly, or select Options > Matches.

When the word that you want appears, select Use.

If the ? character is displayed after the word, the word you intended to write is

not in the dictionary. To add the word to the dictionary, select Spell. Enter the

word (traditional text input is used), and select Save.

Writing compound words

Key in the first part of the word and confirm it by pressing the navigation key

right. Write the last part of the word and confirm the word.

■ Traditional text input

Press a number key, 1 to 9, repeatedly until the desired character appears. Not all

characters available under a number key are printed on the key. The characters

available depend on the selected writing language. See Settings, page 34.

If the next letter you want is located on the same key as the present one, wait

until the cursor appears, or press any of the navigation keys, and enter the letter.

The most common punctuation marks and special characters are available under

the number key 1.

5. Navigate the menus

The phone offers you an extensive range of functions, which are grouped into

menus.

■ Access a menu function

1. To access the menu, select Menu. To change the menu view, select Options >

Main menu view > List or Grid.

2. Scroll through the menu, and select, for example, Settings.

3. If the menu contains submenus, select the one that you want, for example,

Call.

4. If the selected menu contains further submenus, select the one that you want,

for example, Anykey answer.

5. Select the setting of your choice.

6. To return to the previous menu level, select Back. To exit the menu, select Exit.

6. Menu functions

■ Messages

The message services can only be used if they are supported by your

network or your service provider.

Note: When sending messages, your device may display the words Message sent.

This is an indication that the message has been sent by your device to the message

centre number programmed into your device. This is not an indication that the

message has been received at the intended destination. For more details about

messaging services, check with your service provider.

Important: Exercise caution opening messages. Messages may contain malicious

software or otherwise be harmful to your device or PC.

Only devices that have compatible features can receive and display messages. The

appearance of a message may vary depending on the receiving device.

Text messages (SMS)

Using the short message service (SMS) you can send and receive multipart

messages made of several ordinary text messages (network service) that can

contain pictures.

Before you can send any text, picture, or e-mail message, you must save your

message centre number. See Message settings, page 54.

To check SMS e-mail service availability and to subscribe to the service, contact

your service provider. To save an e-mail address in Contacts, see Save numbers,

items, or an image, page 58.

Your device supports the sending of text messages beyond the character limit for a single

message. Longer messages will be sent as a series of two or more messages. Your service

provider may charge accordingly. Characters that use accents or other marks, and characters

from some language options like Chinese, take up more space limiting the number of

characters that can be sent in a single message.

On top of the display you can see the message length indicator counting the number of

characters available. For example, 10/2 means that you can still add 10 characters for the

text to be sent as two messages.

Write and send an SMS message

1. Select Menu > Messages > Create message > Text message.

2. Enter a message. See Write text, page 34. To insert text templates or a picture

into the message, see Templates, page 39. Each picture message comprises

several text messages. Sending one picture or multipart message may cost

more than sending one text message.

3. To send the message, select Send > Recently used, To phone number, To

many, To e-mail address, or to send a message using a predefined message

profile, select Via sending profile. For the sending profile, see Text and SMS e-

mail, page 54. Select or enter a phone number or e-mail address, or select a

profile.

Read and reply to an SMS message

is shown when you have received a message or an e-mail using SMS. The

blinking

indicates that the message memory is full. Before you can receive

new messages, delete some of your old messages in the Inbox folder.

1. To view a new message, select Show. To view it later, select Exit.

To read the message later, select Menu > Messages > Inbox. If more than one

message has been received, select the message that you want to read.

indicates an unread message.

2. While reading a message, select Options and delete or forward the message,

edit the message as a text message or an SMS e-mail, rename the message you

are reading or move it to another folder, or view or extract message details.

You can also copy text from the beginning of the message to your phone

calendar as a reminder note. To save the picture in the Templates folder when

reading a picture message, select Save picture.

3. To reply as a message, select Reply > Text message or Multimedia msg. Enter

the reply message. When replying to an e-mail, first confirm or edit the e-mail

address and subject.

4. To send the message to the displayed number, select Send > OK.

Templates

Your phone offers you text templates , and picture templates

use in text, picture, or SMS e-mail messages.

that you can

To access the template list, select Menu > Messages > Saved items > Text

messages > Templates.

Multimedia messages (MMS)

A multimedia message can contain text, sound, a picture, a calendar note, a

business card, or a video clip. The phone supports multimedia messages that are

up to 300 KB (some operators/networks may limit this to 100 KB) in size. If the

message is too large, the phone may not be able to receive it. Some networks

allow text messages that include an Internet address where you can view the

multimedia message.

Multimedia messaging supports the following formats:

• Picture: JPEG, GIF, WBMP, BMP, and PNG.

• Sound: MP3, AAC, Scalable polyphonic MIDI (SP-MIDI), AMR audio and

monophonic ringing tones.

• Video clips: 3GP format with QCIF and SubQCIF image size and AMR, WB AMR,

or ACC LC audio

The phone may not support all variations of the file formats.

You cannot receive multimedia messages during a call, a game, another Java

application, or an active browsing session over GSM data. Because delivery of

multimedia messages can fail for various reasons, do not rely solely upon them for

essential communications.

Write and send a multimedia message

To set the settings for multimedia messaging, see Multimedia, page 54. To check

availability and to subscribe to the multimedia messaging service, contact your

service provider.

1. Select Menu > Messages > Create message > Multimedia msg..

2. Enter a message. See Write text, page 34.

To insert a file, select Options > Insert and from the following options:

Image, Sound clip or Video clip to insert a file from Gallery.

New imageto activate the Camera and take a new image to be added to the

message.

New sound clip to open the Recorder and make a new record to be added to

the message.

Slide to insert a slide to the message. Your phone supports multimedia

messages that contain several pages (slides). Each slide can contain text, one

image, a calendar note, a business card, and one sound clip. To open a desired

slide if the message contains several slides, select Options > Previous slide >

Next slide or Slide list. To set the interval between the slides, select Options >

Slide timing. To move the text component to the top or bottom of the

message, select Options > Place text first or Place text last.

Business card or Calendar note to insert a business card or a calendar note in

the message.

The following options may also be available: Deleteto delete an image, slide or

sound clip from the message, Clear text, Preview, Save message. In More

optionsthe following options may be available: Insert contact, Insert number,

Message details and Edit subject.

3. To send the message, select Send > Recently used, To phone number, To e-

mail address or To many.

4. Select the contact from the list, or enter a phone number or e-mail address, or

search for it in Contacts > Names. Select OK and the message is moved to the

Outbox folder for sending.

While the multimedia message is being sent, the animated indicator

displayed and you can use other functions on the phone. If the sending fails,

the phone tries to resend it a few times. If this fails, you are notified. The

message remains in the Outbox folder and you can try to resend it later.

If Save sent messages > Yes is selected, the sent message is saved in the Sent

items folder. See Multimedia, page 54. When the message is sent, it is not an

indication that the message has been received at the intended destination.

content from being copied, modified, transferred or forwarded.

Read and reply to a multimedia message

The default setting of the multimedia message service is generally on.

When your phone is receiving a multimedia message, the animated

displayed. When the message has been received,

and the text Multimedia

message received are shown.

1. To read the message, select Show. To view it later, select Exit.

To read the message later, select Menu > Messages > Inbox. In the list of

messages,

indicates an unread message. Select the message that you want

to view.

2. The function of the middle selection key changes according to the currently

displayed attachment in the message.

To view the whole message if the received message contains a presentation,

select Play.

Otherwise, select Play to listen to a sound clip or view a video clip attached to

the message. To zoom in on an image, select Zoom. To view a business card, a

calendar note, or to open a theme object, select Open. To open a streaming

link, select Load.

3. To reply to the message, select Options > Reply > Text message or

Multimedia msg. Enter the reply message, and select Send. You can send the

reply message only to the person who sent you the original message.

Select Options and some of the following options may be also available: Play

presentation, View text, Open image, Open sound clip or Open video clip,

Save image, Save sound clip, Save video clip, Details, Delete message, Reply,

Reply to all, Forward to no., Forward to e-mail or Forward to many, Edit,

Message details.

Memory full

When you have a new multimedia message waiting and the memory for the

messages is full,

blinks and Multimedia memory full. View waiting message.

is shown. To view the waiting message, select Show. To save the message, select

Save. To delete an old message, select the folder and the oId message to be

deleted.

To discard the waiting message, select Exit > Yes. If you select No, you can view

the message.

Folders

The phone saves received text and multimedia messages in the Inbox folder.

Multimedia messages that have not yet been sent are moved to the Outbox folder.

If you have selected Message settings > Text messages > Save sent messages >

Yes, and Message settings > Multimedia msgs. > Save sent messages > Yes, the

sent messages are saved in the Sent items folder.

To save the text message that you are writing and wish to send later in the Saved

items folder, select Options > Save message > Saved text msgs.. For multimedia

messages, select the option Save message.

indicates unsent messages.

To organize your text messages, you can move some of them to My folders, or add

new folders for your messages. Select Messages > Saved items > Text

messages > My folders.

To add a folder, select Options > Add folder. If you have not saved any folders,

select Add.

To delete or rename a folder, scroll to the desired folder, and select Options >

Delete folder or Rename folder.

Instant messages (IM)

Instant messaging (network service) is a way to send short, simple text messages

to online users, delivered over TCP/IP protocols.

Before you can use instant messaging, you must subscribe to the service. To check

the availability and costs, and to subscribe to the service, contact your network

operator or service provider, from whom you also receive your unique ID,

password, and settings.

To set the required settings for the instant messaging service, see Connect.

settings in Access the instant messaging menu, page 45. The icons and texts on

the display may vary, depending on the instant messaging service.

Depending on the network, the active instant messaging conversation may

consume the phone battery faster, and you may need to connect the phone to a

charger.

Access the instant messaging menu

To access the menu while still offline, select Menu > Messages > Instant

messages. If more than one set of connection settings for instant messaging

service is available, select the desired one. If there is only one set defined, it is

selected automatically.

The following options are shown: Login to connect to the instant messaging

service, Saved conversations to view, erase or rename the instant messages

conversations that you have saved during the instant messages session, or

Connect. settingsto edit the settings needed for messaging and presence

connection.

Connect to the instant messaging service

To connect to the instant messaging service, enter the Instant messages menu,

activate an instant messaging service and select Login. When the phone has

successfully connected, Logged in is displayed.

To disconnect from the instant messaging service, select Logout.

Start an instant messaging session

Open the Instant Messages menu, and connect to the service. Start the service in

different ways. Select

Conversations to view the list of new and read instant messages or invitations to

instant messaging during the active instant messaging session. Scroll to the

message or invitation that you want and select Open to read the message.

indicates the new and

indicates the invitations.

the read instant messages.

read group messages.

The icons and texts on the display may vary, depending on the instant messaging

service.

IM contacts includes the contacts that you have added. Scroll to the contact with

whom you would like to chat and select Chat or Open if a new contact is shown in

the list. To add contacts see Contacts for instant messaging, page 48.

indicates the online and

memory. indicates a blocked contact.

sent a new message.

the offline contacts in the phone contacts

indicates a contact that has been

Groups > Public groups. The list of bookmarks to public groups provided by the

network operator or service provider is displayed. To start a instant messaging

session with a group, scroll to a group, and select Join. Enter your screen name

that you want to use in the conversation. When you have successfully joined the

group conversation, you can start a group conversation. To create a private group,

see Groups, page 49.

Search > Users or Groups to search for other instant messaging users or public

groups on the network by phone number, screen name, e-mail address, or name. If

you select Groups, you can search for a group by a member in the group, or by

group name, topic, or ID.

To start the conversation when you have found the user or the group that you

want, select Options > Chat or Join group.

Start a conversation from Contacts, see View the subscribed names, page 62.

Accept or reject an invitation

In the standby mode, when you are connected to the instant messaging service

and you receive a new invitation, New invitation received is displayed. To read it,

select Read. If more than one invitation is received, scroll to the invitation you

want, and select Open. To join the private group conversation, select Accept, and

enter the screen name; or to reject or delete the invitation, select Options >

Reject or Delete.

Read a received instant message

In the standby mode, when you are connected to the instant messaging service,

and you receive a new message that is not a message associated with an active

conversation, New instant message is displayed. To read it, select Read. If you

receive more than one message, scroll to the message, and select Open.

New messages received during an active conversation are held in Instant

messages > Conversations. If you receive a message from someone who is not in

IM contacts, the sender ID is displayed. To save a new contact that is not in the

phone memory, select Options > Save contact.

Participate in a conversation

Join or start an instant messages session by selecting Write. Write your message,

and select Send or press the call key to send it. If you select Options, some of the

following options are available: View conversation, Save contact, Group

members, Block contact, End conversation.

Edit your availability status

1. Open the Instant messages menu, and connect to the instant messaging

service.

2. To view and edit your own availability information, or screen name, select My

settings.

3. To allow all the other instant messaging users to see you as being online, select

Availability > Available for all.

To allow only the contacts on your instant messaging contact list to see you as

being online, select Availability > Avail. for contacts.

To appear as being offline, select Availability > Appear offline.

When you are connected to the instant messaging service,

are online and that you are not visible to others.

indicates that you

Contacts for instant messaging

To add contacts to the instant messages contacts list, connect to the instant

messages service, and select IM contacts. To add a contact to the list, select

Options > Add contact, or if you have no contacts added, select Add. Select Enter

ID manually, Search from serv., Copy from server, or By mobile number.

Scroll to a contact, and to start a conversation, select Chat, or select Options >

Contact info, Block contact (or Unblock contact), Add contact, Remove contact,

Change list, Copy to server, or Availability alerts.

Block and unblock messages

To block messages, connect to the instant messaging service, and select

Conversations > IM contacts; or join or start a conversation. Scroll to the contact

from whom you want to block incoming messages, select Options > Block

contact > OK.

To unblock the messages, connect to the instant messages service, and select

Blocked list. Scroll to the contact from whom you want to unblock the messages,

and select Unblock.

Groups

You can create your own private groups for an instant messaging conversation, or

use the public groups provided by the service provider. The private groups exist

only during an instant messaging conversation, and the groups are saved on the

server of the service provider. If the server you are logged into does not support

group services, all group-related menus are dimmed.

Public groups

You can bookmark public groups that your service provider may maintain.

Connect to the instant messages service, select Groups >Public groups. Scroll to a

group that you want to chat with, and select Join. If you are not in the group,

enter your screen name as your nickname for the group. To delete a group from

your group list, select Options > Delete group.

To search for a group, select Groups > Public groups > Search groups. You can

search for a group by a member in the group, by group name, topic, or ID.

Create a private group

Connect to the instant messaging service, and select Groups > Create group.

Enter the name for the group and the screen name that you want to use. Mark the

private group members in the contacts list, and write an invitation.

E-mail application

The e-mail application allows you to access your compatible e-mail account from

your phone when you are not in the office or at home. This e-mail application is

different from the SMS and MMS e-mail function.

Your phone supports POP3 and IMAP4 e-mail servers. Before you can send and

retrieve any e-mail, you may need to do the following:

• Obtain a new e-mail account or use the current one. For availability of your

e-mail account contact your e-mail service provider.

• For the settings required for e-mail, contact your e-mail service provider. You

may receive the e-mail configuration settings as a configuration message. See

Configuration settings service, page 16. You can also enter the settings

manually. See Configuration, page 79.

To activate the e-mail settings, select Menu > Messages > Message

settings > E-mail messages. See E-mail, page 55.

This application does not support keypad tones.

Write and send an e-mail

1. Select Menu > Messages > E-mail > Create e-mail.

2. Enter the recipient’s e-mail address, a subject, and the e-mail message.

To attach a file to the e-mail, select Options > Attach and a desired file from

the Gallery.

3. Select Send > Send now.

Download e-mail

1. To access the e-mail application, select Menu > Messages > E-mail.

2. To download e-mail messages that have been sent to your e-mail account,

select Retrieve.

To download new e-mail messages and to send e-mail that have been saved in

the Outbox folder, select Options > Retrieve and send.

To first download the headings of the new e-mail messages that have been

sent to you e-mail account, select Options > Check new e-mail. Then, to

download the selected e-mail, mark the desired ones, and select Options >

Retrieve.

3. Select the new message in Inbox. To view it later, select Back.

indicates an

unread message.

Read and reply to e-mail

Select Menu > Messages > E-mail > Inbox. While reading the message, select

Options to view the available options.

To reply to an e-mail, select Reply > Original text or Empty screen. To reply to

many, select Options > Reply to all. Confirm or edit the e-mail address and

subject, then write your reply. To send the message, select Send > Send now.

Inbox and other folders

Your phone saves e-mail that you have downloaded from your e-mail account in

Inbox folder. Other folders contains the following folders: Drafts for saving

unfinished e-mail, Archive for organizing and saving your e-mail, Outbox for

saving e-mail that have not been sent, and Sent items for saving e-mail that have

been sent.

To manage the folders and their e-mail content, select Options > Manage folder.

Delete e-mail messages

Select Menu > Messages > E-mail > Options > Manage folder and the desired

folder. Mark the messages that you want to delete, and to delete them, select

Options > Delete.

Deleting an e-mail from your phone does not delete it from the e-mail server. To

set the phone to delete the e-mail also from the e-mail server, select Menu >

Messages > E-mail > Options > Extra settings > Leave c. on server > Delete

retr. msgs.

Voice messages

The voice mailbox is a network service and you may need to subscribe to it. For

details, contact your service provider.

To call your voice mailbox, select Menu > Messages > Voice messages > Listen to

voice messages. To enter, search for or edit your voice mailbox number, select

Voice mailbox number.

If supported by the network,

will show new voice messages. Select Listen to

call your voice mailbox number.

Info messages

With the Info messages network service, you can receive messages on various

topics from your service provider. To check availability, topics, and the relevant

topic numbers, contact your service provider.

Service commands

Select Menu > Messages > Service commands. Write and send service requests

(also known as USSD commands) to your service provider, such as activation

commands for network services.

Delete messages

To delete all messages from a folder, select Menu > Messages > Delete messages

and the folder from which you want to delete the messages. Select Yes, and if the

folder contains unread messages, the phone asks whether you want to delete

them also. Select Yes again.

Message settings

Text and SMS e-mail

The message settings affect the sending, receiving, and viewing of messages.

Select Menu > Messages > Message settings > Text messages, and from the

following options:

• Sending profile, and if more than one message profile set is supported by your

SIM card, select the set you want to change.

The following options may be available: Message centre number (delivered

from your service provider), Messages sent via, Message validity, Default

recipient number (text messages) or E-mail server (e-mail), Delivery reports,

Use packet data, Reply via same centre (network service) and Rename

sending profile.

• Save sent messages > Yes to set the phone to save the sent text messages in

the Sent items folder.

Multimedia

The message settings affect the sending, receiving, and viewing of multimedia

messages.

Select Menu > Messages > Message settings > Multimedia msgs. and from the

following options:

• Save sent messages > Yes — to set the phone to save sent multimedia

messages in the Sent items folder.

• Delivery reports — to ask the network to send delivery reports about your

messages (network service).

• Default slide timing— to define the default time between slides in multimedia

messages.

• Allow multimedia reception > Yes or No — to receive or to block the

multimedia message. If you select In home network, you cannot receive

multimedia messages when outside your home network.

• Incoming multimedia messages > Retrieve, Retrieve manually, or Reject — to

allow the reception of multimedia messages automatically, manually after

being prompted, or to reject the reception.

• Configuration settings > Configuration. Only the configurations that support

multimedia messaging are shown. Select a service provider, Default, or

Personal config. for multimedia messaging.

Select Account and select a multimedia messaging service account contained

in the active configuration settings.

• Allow adverts — to receive or reject advertisements. This setting is not shown

if Allow multimedia reception is set to No.

E-mail

The settings affect the sending, receiving and viewing of e-mail.

You may receive the configuration settings for the e-mail application as a

configuration message. See Configuration settings service, page 16. You can also

enter the settings manually. See Configuration, page 79.

To activate the settings for the e-mail application, select Menu > Messages >

Message settings > E-mail messages and from the following options:

• Configuration — Select the set that you would like to activate.

• Account — Select an account provided by the service provider.

• My name. — Enter your name or nickname.

• E-mail address— Enter e-mail address.

• Include signature — You can define a signature that is automatically added to

the end of your e-mail when you write your message.

• Reply-to address — Enter the e-mail address to which you want the replies to

be sent.

• SMTP user name— Enter the name that you want to use for outgoing mail.

• SMTP password — Enter the password that you want to use for outgoing mail.

• Display terminal window — Select Yes to perform manual user authentication

for intranet connections.

• Incoming server type— Select either POP3 or IMAP4 depending on the type of

e-mail system that you are using. If both types are supported, select IMAP4.

• Incoming mail settings

If you selected POP3 as the incoming server type, the following options are

shown: Retrieve e-mails, POP3 user name, POP3 password, and Display

terminal window.

If you selected IMAP4 as the incoming server type, the following options are

shown: Retrieve e-mails, Retrieval method, IMAP4 user name, IMAP4

password, and Display terminal window.

Other settings

To select other settings for messages, select Menu > Messages > Message

settings > Other settings. To change the font size for reading and writing

messages, select Font size. To set the phone to replace character-based smileys

into graphical ones, select Graphical smileys > Yes.

Message counter

Select Menu > Messages > Message counter for approximate information on

your recent communications.

■ Contacts

You can save names and phone numbers (Contacts) in the phone

memory and in the SIM card memory.

The phone memory may save contacts with numbers and text items.

You can also save an image for a certain number of names.

Names and numbers saved in the SIM card memory, are indicated by

Search for a contact

Select Menu > Contacts > Names > Options > Search. Scroll through the list of

contacts or enter the first letter of the name you are searching for.

Save names and phone numbers

Names and numbers will be saved in the used memory. Select Menu > Contacts >

Names > Options > Add new contact. Enter the name and the phone number.

Save numbers, items, or an image

In the phone memory for contacts you can save different types of phone numbers,

and short text items per name.

The first number you save is automatically set as the default number, and it is

indicated with a frame around the number type indicator (for example,

When you select a name (for example, to make a call) the default number is used

unless you select another number.

1. Make sure that the memory in use is either Phone or Phone and SIM.

2. Scroll to the name to which you want to add a new number or text item, and

select Details > Options > Add detail.

3. To add a number, select Number and one of the number types.

To add another detail, select a text type, or an image from Gallery.

To search for an ID from the server of your service provider if you have

connected to the presence service, select User ID > Search. See My presence,

page 60. If only one ID is found, it is automatically saved. Otherwise, to save

the ID, select Options > Save. To enter the ID, select Enter ID manually.

To change the number type, scroll to the desired number, and select Options >

Change type. To set the selected number as the default number, select Set as

default.

4. Enter the number or text item; to save it, select OK.

5. To return to standby mode, select Back > Exit.

Copy contacts

Search for the contact you want to copy, and select Options > Copy. You can copy

names and phone numbers from the phone contact memory to the SIM card

memory, or vice versa. The SIM card memory can save names with one phone

number attached to them.

Edit contact details

1. Search for the contact you want to edit, select Details, and scroll to the desired

name, number, text item, or image.

2. To edit a name, number, or text item, or to change image, select Options > Edit

name, Edit number, Edit detail, or Change image.

You cannot edit an ID when it is on the IM contacts or the Subscribed names

list.

Delete contacts or contact details

To delete all the contacts and the details attached to them from the phone or SIM

card memory, select Menu > Contacts > Delete all contacts > From phone

mem., or From SIM card. Confirm with the security code.

To delete a contact, search for the desired contact, and select Options > Delete

contact.

To delete a number, text item, or an image attached to the contact, search for the

contact, and select Details. Scroll to the desired detail, and select Options >

Delete > Delete number, Delete detail, or Delete image. Deleting an image from

contacts does not delete it from Gallery.

Business cards

You can send and receive a person’s contact information from a compatible device

that supports the vCard standard as a business card.

To send a business card, search for the contact whose information you want to

send, and select Details > Options > Send business card > Via multimedia, Via

text message, or Via Bluetooth.

When you have received a business card, select Show > Save to save the business

card in the phone memory. To discard the business card, select Exit > Yes.

My presence

With the presence service (network service) you can share your presence status

with other users with compatible devices and access to the service. Presence

status includes your availability, status message, and personal logo. Other users

who have access to the service and who request your information are able to see

your status. The requested information is shown in Subscribed names in the

viewers’ Contacts menu. You can personalize the information that you want to

share with others and control who can see your status.

Before you can use presence, you must subscribe to the service. To check the

availability, and costs, and to subscribe to the service, contact your network

operator or service provider, from whom you also receive your unique ID,

password, and the settings for the service. See Configuration, page 79.

While you are connected to the presence service, you can use the other functions

of the phone, and the presence service is active in the background. If you

disconnect from the service, your presence status is shown for a certain amount of

time to viewers depending on the service provider.

Select Menu > Contacts > My presence and select from the following options:

• Connect to 'My presence' service or Disconnect from service to connect to or

disconnect from the service.

• View my presence to view the status in Private presence and Public presence.

• Edit my presence to change your presence status. Select My availability, My

presence message, My presence logo, or Show to.

• My viewers > Current viewers, Private list, or Blocked list.

• Settings > Show current presence in idle, Synchronise with profiles,

Connection type, or Presence settings.

Subscribed names

You can create a list of contacts whose presence status information you want to

be aware of. You can view the information if it is allowed by the contacts and the

network. To view these subscribed names, scroll through the contacts, or use the

Subscribed names menu.

Make sure that the memory in use is either Phone or Phone and SIM.

To connect to the Presence service, select Menu > Contacts > My presence >

Connect to 'My presence' service.

Add contacts to the subscribed names

1. Select Menu > Contacts > Subscribed names.

2. If you have no contacts on your list, select Add. Otherwise, select Options >

Subscribe new. The list of your contacts is shown.

3. Select a contact from the list and if the contact has an user ID saved, the

contact is added to the subscribed names list.

View the subscribed names

To view the presence information, see Search for a contact, page 57.

1. Select Menu > Contacts > Subscribed names.

The status information of the first contact on the subscribed names list is

displayed. The information that the person wants to give to the others may

include text and some of the following icons:

or indicate that the person is either available, discreet or not

available.

indicates that the person’s presence information is not available.

2. Select Details to view the details of the selected contact; or select Options >

Subscribe new, Chat, Send message, Send business card, or Unsubscribe.

Unsubscribe a contact

To unsubscribe a contact from the Contacts list, select the contact and select

Details > the user ID > Options > Unsubscribe > OK.

To unsubscribe, use the Subscribed names menu, see View the subscribed names,

page 62.

Settings

Select Menu > Contacts > Settings, and select from the following options:

Memory in useto select SIM card or phone memory for your contacts. To recall

names and number from both memories, select Phone and SIM. In that case, the

names and numbers will be saved in the phone memory. To select how the names

and numbers in contacts are displayed, select Contacts view. To view the free and

used memory capacity, select Memory status.

Groups

Select Menu > Contacts > Groups to arrange the names and phone numbers

saved in the memory into caller groups with different ringing tone and a group

image.

Speed dialing

To assign a number to a speed-dialing key, select Menu > Contacts > Speed dials,

and scroll to the speed-dialing number that you want.

Select Assign, or if a number has already been assigned to the key, select

Options > Change. Select Search and select first the name and then the number

you want to assign. If the Speed dialling function is off, the phone asks whether

you want to activate it. See also Speed dialling in Call, page 76.

To make a call using the speed-dialing keys, see Speed dialing, page 32.

Voice dialing

You can make a phone call by saying a voice tag that has been added to a phone

number. Any spoken words, such as a name, can be a voice tag. The number of

voice tags you can create is limited.

Before using voice tags, note that:

•

Voice tags are not language-dependent. They are dependent on the speaker's voice.

You must say the name exactly as you said it when you recorded it.

Voice tags are sensitive to background noise. Record voice tags and use them in a quiet

environment.

•

Very short names are not accepted. Use long names and avoid similar names for different

numbers.

Note: Using voice tags may be difficult in a noisy environment or during an

emergency, so you should not rely solely upon voice dialing in all circumstances.

Add and manage voice tags

Save or copy to the phone memory the contacts for which you want to add a voice

tag. You can also add voice tags to the names in the SIM card, but if you replace

your SIM card with a new one, you first must delete the old voice tags before you

can add new ones.

1. Search for the contact to which you want to add a voice tag.

2. Select Details, scroll to the desired phone number, and select Options > Add

voice tag.

3. Select Start, and say clearly the words you want to record as a voice tag. After

recording, the phone plays the recorded tag.

appears after the phone number with a voice tag in Contacts.

To check the voice tags, select Menu > Contacts > Voice tags. Scroll to the

contact with the voice tag that you want, and select an option to listen to, delete,

or change the recorded voice tag.

Make a call by using a voice tag

If the phone has an application running that is sending or receiving data using a

GPRS connection, you must end the application before voice dialing.

1. In the standby mode, press and hold the right selection key. A short tone is

heard, and Speak now is displayed.

2. Say the voice tag clearly. The phone plays the recognized voice tag, and dials

the phone number of the voice tag after 1.5 seconds.

If you are using a compatible headset with the headset key, press and hold the

headset key to start the voice dialing.

Info, service, and my numbers

Select Menu > Contacts, and the following functions may be available:

Info numbers to call the information numbers of your service provider if the

numbers are included on your SIM card (network service).

Service numbers to call the service numbers of your service provider if the

numbers are included on your SIM card (network service).

My numbersto view the phone numbers assigned to your SIM card, if the

numbers are included on your SIM card.

■ Call register

The phone registers the phone numbers of identified missed, received,

and dialed calls, the message recipients, and the approximate length

of your calls.

The phone registers if it is switched on and within the network’s service area, and

the network supports these functions.

Recent calls lists

When you select Options in the Missed calls, Received calls , Dialled numbers, or

Message Recipients menu, you can view the time of the call; edit, view or call the

registered phone number; add it to the memory; or delete it from the list. You can

also send a text message. To delete the recent calls lists, select Delete recent call

lists.

Counters and timers

Note: The actual invoice for calls and services from your service provider may vary,

depending upon network features, rounding-off for billing, taxes and so forth.

Some timers, including the life timer, may be reset during service or software

upgrades.

Select Menu > Call register > Call duration, Packet data counter, or Packet data

conn. timer for approximate information on your recent communications.

Positioning information

The network may send you a location request. You can ensure that the network

will deliver location information of your phone only if you approve it (network

service). Contact your network operator or service provider to subscribe and to

agree upon the delivery of location information.

To accept or reject the location request, select Accept or Reject. If you miss the

request, the phone automatically accepts or rejects it according to what you have

agreed with your network operator or service provider. The phone displays 1

missed position request. To view the missed location request, select Show.

To view the information on the 10 most recent privacy notifications and requests

or to delete them, select Menu > Call register > Positioning > Position log >

Open folder or Delete all.

■ Settings

Profiles

Your phone has various setting groups, called profiles, for which you

can customize the phone tones for different events and environments.

Select Menu > Settings > Profiles. Scroll to a profile, and select it.

• To activate the selected profile, select Activate.

• To set the profile to be active until a certain time up to 24 hours, select Timed

and set the time the profile setting shall end. When the time set for the profile

expires, the previous profile that was not timed, becomes active.

• To personalize the profile, select Personalise. Select the setting you want to

change and make the changes.

To change your presence status information, select My presence > My

availability, or My presence message. The My presence menu is available if

you set Synchronise with profiles to On. See My presence, page 60.

Themes

A theme contains many elements for personalizing your phone, such as wallpaper,

screen saver, color scheme, and a ringing tone.

Select Menu > Settings > Themes and select from the following options:

• Select themeto set a theme in your phone. A list of folders in Gallery opens.

Open the Themes folder, and select a theme.

• Theme downloadsto open a list of links to download more themes. See

Download files, page 108.

Tones

You can change the settings of the selected active profile.

Select Menu > Settings > Tones. Select and change Incoming call alert, Ringing

tone, Ringing volume, Vibrating alert, Message alert tone, Instant message alert

tone, Keypad tones, and Warning tones. You can find the same settings in the

Profilesmenu, see Profiles, page 67.

To set the phone to ring only upon calls from phone numbers that belong to a

selected caller group, select Alert for. Scroll to the caller group you want or All

calls and select Mark.

Display

Select Menu > Settings > Display and from the following options:

Wallpaper > Select wallpaper or Select slide set, and an image or a slide from

Gallery — to set your phone to display it when the phone is in standby mode. To

activate the wallpaper, select On.

Screen saver — To choose a screen saver from Gallery, select Screen savers >

Image, Slide set, Video clip, Analogue clock, or Digital clock. To enter the time

after which the screen saver is activated, select Time-out. To activate the screen

saver, select On.

Power saver > On — to save some battery power. A digital clock is displayed when

no function of the phone is used for a certain time.

Colour schemes — to change the color in some display components, such as

indicators and signal and battery bars.

Idle state font colour — to select the color for the texts on the display in the

standby mode.

Operator logo — to set your phone to display or hide the operator logo.

Time and date

Select Menu > Settings > Time and date and from the following options:

Clock — to set the phone to show the clock in the standby mode, adjust the clock

and select the time zone and the time format.

Date— to set the phone to show the date in the standby mode, set the date, and

select the date format and date separator.

Auto-update of date & time (network service) — to set the phone to

automatically update the time and date according to the current time zone.

My shortcuts

With personal shortcuts you get quick access to often used functions of the

phone.

Right selection key

To set one phone function from a predefined list to the right selection key, select

Menu > Settings > My shortcuts > Right selection key. See Standby mode,

page 27.This menu may not be shown, depending on your service provider.

Navigation key

To assign other phone functions from a predefined list to the navigation key,

select Menu > Settings > My shortcuts > Navigation key. See Shortcuts in the

standby mode, page 28.

Voice commands

To activate phone functions by saying a voice tag, select Menu > Settings > My

shortcuts >Voice commands. Select a folder, scroll to a function to which you

want to add a voice tag, and select Add.

indicates a voice tag.

Connectivity

You can connect your phone to compatible devices using Bluetooth wireless

technology, for example, at the same time to a Bluetooth stereo headset and a PC.

You can also define the settings for packet data dial-up connections.

Bluetooth wireless technology

This device is compliant with Bluetooth Specification 1.2 supporting the following profiles:

hands-free, object push profile, file transfer profile, dial-up networking profile, SIM access

profile, service discovery profile, generic access profile, serial port profile, advanced audio

distribution profile, and audio video remote control profile. To ensure interoperability

between other devices supporting Bluetooth technology, use Nokia approved enhancements

for this model. Check with the manufacturers of other devices to determine their

compatibility with this device.

There may be restrictions on using Bluetooth technology in some locations. Check with your

local authorities or service provider.

Features using Bluetooth technology, or allowing such features to run in the background

while using other features, increase the demand on battery power and reduces the battery

life.

Bluetooth technology allows you to connect the phone to a compatible Bluetooth

device up to 10 meters. Since devices using Bluetooth technology communicate

using radio waves, your phone and the other devices do not need to be in direct

line-of sight, although the connection can be subject to interference from

obstructions such as walls or from other electronic devices.

Set up a Bluetooth connection

Select Menu > Settings > Connectivity > Bluetooth. Select from the following

options:

Bluetooth > On or Off — to activate or deactivate the Bluetooth function.

indicates an active Bluetooth connection.

Search for audio enhancements — to search for compatible Bluetooth audio

devices. Select the device that you want to connect to the phone.

Paired devices — to search for any Bluetooth device in range. Select New to list

any Bluetooth device in range. Scroll to a device, and select Pair. Enter the

Bluetooth passcode of the device to associate (pair) the device to your phone. You

only must give this passcode when you connect to the device for the first time.

Your phone connects to the device, and you can start data transfer.

Bluetooth wireless connection

Select Menu > Settings > Connectivity > Bluetooth. To check which Bluetooth

connection is currently active, select Active device. To view a list of Bluetooth

devices that are currently paired with the phone, select Paired devices.

Select Options to access some of the following functions depending on the status

of the device and the Bluetooth connection. Select Connect > Assign short name,

or Auto-conn. without confirmation > Yes — to set the phone automatically to

connect to a paired Bluetooth device.

Bluetooth settings

To define how your phone is shown to other Bluetooth devices, select Menu >

Settings > Connectivity > Bluetooth > Bluetooth settings > My phone's

visibility or My phone's name.

We recommend to use the setting Hidden in My phone's visibility. Always accept only

Bluetooth communication from others that you agree with.

Packet data (EGPRS)

Enhanced general packet radio service (EGPRS), packet data, is a network service

allows mobile phones to send and receive data over an Internet protocol

(IP)-based network. It enables wireless access to data networks such as the

Internet.

The applications that may use packet data are MMS, video streaming, browsing

sessions, e-mail, remote SyncML, Java application downloading, and the PC dial-

up.

To define how to use the service, select Menu > Settings > Connectivity > Packet

data > Packet data connection > When needed — to set the packet data

registration and connection to established when an application using packet data

needs it and closed when you end the application, or Always online — to set the

phone to automatically register to an packet data network when you switch the

phone on. is shown.

Modem settings

You can connect the phone using Bluetooth wireless technology to a compatible

PC and use the phone as a modem to enable EGPRS connectivity from the PC.

To define the settings for connections from the PC, select Menu > Settings >

Connectivity > Packet data > Packet data settings > Active access point,

activate the access point you want to use, and select Edit active access point.

Select Alias for access point, and enter a nick name for the currently selected

access point. Select Packet data access point, and enter the access point name

(APN) to establish a connection to an EGPRS network.

You can also set the dial-up service settings (access point name) on your PC using

the Nokia Modem Options software. See PC Suite, page 113. If you have set the

settings both on the PC and on your phone, the PC settings are used.

Data transfer and synchronization

Synchronize your data from calendar, notes, and contacts with another

compatible device (for example, a mobile phone), a compatible PC, or a remote

Internet server (network service).

Partner list

To copy or synchronize data from your phone, the name of the device and the

settings must be in the list of partners in transfer contacts. If you receive data

from another device, for example, a compatible mobile phone, the partner is

automatically added to the list, using the contact data from the other device.

Server syncand PC sync settings are the original items in the list.

To add new partner to the list, for example a new device, select Menu >

Settings > Connectivity > Data transfer > Options > Add transfer contact >

Phone syncor Phone copy, and enter the settings according to the transfer type.

To edit the copy and synchronize settings, select a contact from the partner list,

and select Options > Edit.

To delete a selected partner, select Options > Delete. You can not delete Server

sync and Phone sync.

Data transfer with a compatible device

For synchronization Bluetooth wireless technology is used. The other device is in

the standby mode.

To start a data transfer, select Menu > Settings > Connectivity > Data transfer

and the transfer partner from the list, other than Server sync and PC sync.

According to the settings the selected data will be copied or synchronized.

Data transfer without SIM card

Your phone allows the data transfer without having a SIM card inserted.

Switch your phone on with no SIM card inserted, and select Transfer and from the

following options:

Transfer contacts and select a contact, other than Server sync and PC sync, from

the partner list to transfer data from your phone. The phone starts a

synchronization or copy session.

Receive data > Via Bluetooth to receive data from the other phone.

Synchronize from a compatible PC

To synchronize data from calendar, notes, and contacts from a compatible PC, use

Bluetooth wireless technology. You also need Nokia PC Suite software of your

phone installed on the PC.

Synchronize the data in the phone contacts, calendar, and notes to correspond

with the data of your compatible PC by starting the synchronization from the PC.

Synchronize from a server

To use a remote Internet server you have to subscribe to a synchronization service.

For more information and the settings required for this service, contact your

service provider. You may receive the settings as a configuration message. See

Configuration settings service, page 16 and Configuration, page 79.

If you have saved data on the remote Internet server, you can synchronize your

phone by starting the synchronization from your phone.

Select Menu > Settings > Connectivity > Data transfer > Server sync.

Depending on the settings, select Initialising sync or Initialising copy.

Synchronizing for the first time or after an interrupted synchronization may take

up to 30 minutes to complete, if the contacts or calendar are full.

Call

Select Menu > Settings > Call and from the following options:

Call divert (network service) — to divert your incoming calls. You may not be able

to divert your call if some call barring functions are active. See Call barring

service in Security, page 80.

Anykey answer > On — to answer an incoming call by briefly pressing any key,

except the power, the left and right selection keys, or the end key.

Automatic redial > On — to set your phone to make a maximum of ten attempts

to connect the call after an unsuccessful call attempt.

Speed dialling > On and the names and phone numbers assigned to the speed-

dialing keys, 2 to 9. To dial, press and hold the corresponding number key.

Call waiting > Activate — to set the network to notify you of an incoming call

while you have a call in progress (network service). See Call waiting, page 32.

Summary after call > On — to briefly display the approximate duration and cost

(network service) of the call after each call.

Send my caller ID (network service) > Yes, or Set by network.

Line for outgoing calls(network service) — to select the phone line 1 or 2 to make

calls, if supported by your SIM card.

Phone

Select Menu > Settings > Phone and from the following options:

Phone language — to set the display language of your phone. If you select

Automatic, the phone selects the language according to the information on the

SIM card.

Memory status — to view the free memory and the used memory for each

function in the list.

Automatic keyguard— to set the keypad of your phone to lock automatically

after a pre-set time delay when the phone is in the standby mode and no function

of the phone has been used. Select On, and you can set the time from 5 seconds to

60 minutes.

Security keyguard — to set the phone to ask for the security code when you

unlock the keyguard. Enter the security code, and select On.

When the keyguard is on, calls still may be possible to the official emergency number

programmed into your device.

Cell info display > On — to receive information from the network operator

depending on the network cell used (network service).

Welcome noteand enter the note you would like — to be shown briefly when the

phone is switched on.

Operator selection > Automatic— to set the phone automatically to select one of

the cellular networks available in your area. With Manual, you can select a

network that has a roaming agreement with your home network operator.

Confirm SIM service actions. See SIM services, page 112.

Help text activation — to select whether the phone shows help texts.

Start-up tone — to select whether the phone plays a start-up tone when the

phone is switched on.

Enhancement

This menu is shown only if the phone is or has been connected to a compatible

mobile enhancement.

Select Menu > Settings > Enhancements. You can select an enhancement menu

if the corresponding enhancement is or has been connected to the phone.

Depending on the enhancement, select from the following options:

Default profile— to select the profile that you want to be automatically activated

when you connect to the selected enhancement.

Automatic answer — to set the phone to answer an incoming call automatically

after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic

answer is off.

Lights — to set the lights permanently On. Select Automatic to set the lights on

for 15 seconds after a key press.

Text phone > Use text phone > Yes — to use the text phone settings instead of

headset or loopset settings.

Configuration

You can configure your phone with settings that are required for certain services

to function correctly. The services are browser, multimedia messaging, remote

Internet server synchronization, presence, e-mail application, and streaming. Get

the settings from your SIM-card, from a service provider as a configuration

message or enter your personal settings manually. Configuration settings from up

to 10 different service providers can be stored in the phone and can be managed

within this menu.

To save the configuration settings received by a configuration message sent by a

service provider, see Configuration settings service, page 16.

Select Menu > Settings > Configuration and from the following options:

Default configuration settings — to view the service providers saved in the

phone. Scroll to a service provider, and select Details to view the applications that

the configuration settings of this service provider supports. To set the

configuration settings of the service provider as default settings, select Options >

Set as default. To delete configuration settings, select Delete.

Activate default in all applications — to activate the default configuration

settings for supported applications.

Preferred access point— to view the saved access points. Scroll to an access

point, and select Options > Details to view the name of the service provider, data

bearer, and packet data access point or GSM dial-up number.

Connect to service provider support — to download the configuration settings

from your service provider.

Personal configuration settings — to add new personal accounts for various

services manually, and to activate or delete them. To add a new personal account

if you have not added any, select Add; otherwise, select Options > Add new.

Select the service type, and select and enter each of the required parameters. The

parameters differ according to the selected service type. To delete or activate a

personal account, scroll to it, and select Options > Delete or Activate.

Security

When security features that restrict calls are in use (such as call barring, closed user group

and fixed dialing) calls still may be possible to the official emergency number programmed

into your device.

Select Menu > Settings > Security and from the following options:

PIN code request — to set the phone to ask for your PIN or UPIN code every time

the phone is switched on. Some SIM cards do not allow the code request to be

turned off.

Call barring service(network service) — to restrict incoming calls to and outgoing

calls from your phone. A barring password is required.

Fixed dialling — to restrict your outgoing calls to selected phone numbers if this

function is supported by your SIM card.

Closed user group (network service) — to specify a group of people whom you can

call and who can call you.

Security level > Phone — the phone asks for the security code whenever a new

SIM card is inserted into the phone. Select Memory and the phone asks for the

security code when the SIM card’s memory is selected and you want to change the

memory in use.

Access codes — to set the PIN code or UPIN code in use, or to change the security

code, PIN code, UPIN code, PIN2 code, and barring password.

Code in use — to select whether the PIN code or UPIN code should be active.

Pin2 code request — to select whether PIN2 code is required when using a

specific phone feature which is covered by the PIN2 code.

Restore factory settings

To reset some of the menu settings to their original values, select Menu >

Settings > Restore factory settings. Enter the security code. Note that the data

you have entered or downloaded are not deleted, for example, the names and

phone numbers saved in contacts.

■ Operator menu

This menu lets you access a portal to services provided by your network operator.

The name and the icon depends on the operator. For more information contact

your network operator.

The operator can update this menu with a service message. For more information,

refer to Service inbox, page 108.

■ Gallery

In this menu you can manage graphics, images, recordings and tones.

These files are arranged in folders.

Your phone supports an activation key system to protect acquired

content. Always check the delivery terms of any content and activation key before

acquiring them, as they may be subject to a fee.

content from being copied, modified, transferred or forwarded.

The files stored in Gallery use a memory that may have a capacity of

approximately 52 MB in the phone.

1. Select Menu > Gallery. The original folders in Gallery are: Images, Video clips,

Music files, Themes, Graphics, Tones, Recordings, and Received files.

2. Scroll to the desired folder. To view a list of files in the folder, select Open.

Select Options and one of the following options may be available: Downloads,

Delete folder, Move, Rename folder, Details, Type of view, Sort, Add folder,

Memory status, and Activation key list.

3. Scroll to the file you want to view, and select Open. Select Options, and use

one of the following functions that may be available for the selected file:

Downloads, Delete, Move, Rename, Apply theme, Set as wallpaper, Set as

ring tone, Details, Type of view, Sort, Add folder, Memory status.

Send — to send the selected file using MMS or Bluetooth wireless technology.

Delete all — to delete all the files and folders in the selected folder.

Edit image— to insert text, a frame or clip-art into the selected picture, or to

crop the image.

Open in sequence — to view the files in the folder one by one.

Zoom — to increase the size of the image

Mute audio (Unmute audio) — to mute (unmute) the sound file.

Set contrast — to adjust the contrast level of the image.

Activate content— to update the activation key of the selected file. The option

is only shown if the activation key updating is supported by the file.

Activation key list — to view the list of all available activation keys. You can

delete the activation keys, for example, delete the expired ones.

■ Media

tones), and other content from being copied, modified, transferred or

forwarded.

Camera

You can take photos or record video clips with the built-in camera. The camera

produces pictures in JPEG format and video clips in 3GP format.

When taking and using images or video clips, obey all laws and respect local customs as well

as privacy and legitimate rights of others.

Take a photo

Select Menu > Media > Camera > Capture. The phone saves the photo in

Gallery > Images. To take another photo, select Back; to send the photo as a

multimedia message, select Send. To view the options, select Options.

Record a video clip

Select Menu > Media > Camera. To select the video mode, scroll left or right, or

select Options > Video, and select Record. To pause the recording, select Pause;

to resume the recording, select Contin.. To stop the recording, select Stop. The

phone saves the recording in Gallery > Video clips. To view the options, select

Options.

Media player

With the media player you can view, play and download files, such as images,

audio, video and animated images. You can also view compatible streaming videos

from a network server (network service).

Select Menu > Media > Media player > Open gallery, Bookmarks, Go to address,

or Media downloads.

Set up for a streaming service

You may receive the configuration settings required for the streaming as a

configuration message from the network operator or service provider. See

Configuration settings service, page 16. To enter the settings manually, see

Configuration, page 79.

Select Menu > Media > Media player > Streaming settings and from the

following options:

Configuration — only the configurations that support streaming are shown.

Select a service provider, Default, or Personal config..

Account and a streaming service account contained in the active configuration

settings.

Music player

Your phone includes a music player for listening to music tracks, recordings, or

other MP3 or AAC sound files that you have transferred to the phone with the

Nokia Audio Manager application. Music files are automatically detected and

added to the default track list.

Play music tracks

1. Select Menu > Media > Music player. The details of the first track on the

default track list are shown.

To use the graphical keys,

, or

, on the display, scroll left or right

to the desired key, and select it.

2. To play a track, scroll to the track that you want, and select

To skip to the beginning of the next track, select

of the previous track, select twice.

. To skip to the beginning

To rewind the current track, select and hold . To fast forward the current

track, select and hold . Release the key at the position you want.

3. To stop the playing, select

Warning: Listen to music at a moderate level. Continuous exposure to high

volume may damage your hearing. Do not hold the device near your ear when the

loudspeaker is in use, because the volume may be extremely loud.

Music player settings

In the Music player menu, the following options may be available:

Volume — to change the volume level, press the navigation key left or right.

Play via bluetooth — to make a connection to an audio enhancement using a

Bluetooth connection.

Track list — to view all the tracks available on the track list. To play a track, scroll

to the desired track, and select Play. Select Options > Refresh all tracks or

Change track list — to refresh the track list (for example, after adding new tracks

to the list) or change the track list that is shown when you open the Music player

menu, if several track lists are available in the phone.

Play options > Random > On — to play the tracks in the track list in random

order. Select Repeat > Current track or All tracks to play the current track or the

entire track list repeatedly.

Media equaliser — to open the list of media equalizer sets. See Equalizer, page 90.

Loudspeakeror Headset — to listen to the music player through the loudspeaker

or a compatible headset connected to the phone.

Tip: When using a headset, you can skip to the next track by pressing the

headset key.

Send — to send the selected file using MMS or a Bluetooth connection.

Music downloads— to connect to a browser service related to the current track.

This function is only available when the address of the service is included in the

track.

Memory status — to view the free and used memory capacity.

Radio

The FM radio depends on an antenna other than the wireless device’s. A compatible headset

or enhancement needs to be attached to the device for the FM radio to function properly.

Warning: Listen to music at a moderate level. Continuous exposure to high

volume may damage your hearing. Do not hold the device near your ear when the

loudspeaker is in use, because the volume may be extremely loud.

Select Menu > Media > Radio. To use the graphical keys

, or

the display, scroll left or right to the desired key, and select it.

Save radio channels

1. To start the channel search, select and hold

frequency in 0.05 MHz steps, briefly press

. To change the radio

2. To save the channel to a memory location 1 to 9, press and hold the

corresponding number key. To save the channel in the memory location from

10 to 20, press briefly 1 or 2, and press and hold the desired number key, 0 to 9.

3. Enter the name of the channel, and select OK.

Listen to the radio

Select Menu > Media > Radio. To scroll to the desired channel, select

or press the headset key, or to select a radio channel location, briefly press the

corresponding number keys.

Select Options and from the following options:

Switch off — to turn off the radio.

Volume — to change the volume level, press the navigation key left or right.

Save channel, and enter the channels name — to save a new channel.

Channels — to select the list of saved channels. To delete or rename a channel,

scroll to the desired channel, and select Options > Delete channel or Rename.

Loudspeakeror Headset — to listen to the radio using the loudspeaker or headset.

Keep the headset connected to the phone. The lead of the headset functions as the

radio antenna.

Set frequency— to enter the frequency of the desired radio channel.

You can normally make a call or answer an incoming call while listening to the

radio. During the call, the volume of the radio is muted.

When an application using a packet data or HSCSD connection is sending or

receiving data, it may interfere with the radio.

Recorder

You can record pieces of speech, sound, or an active call. This is useful when

recording a name and phone number for writing them down later.

The recorder cannot be used when a data call or GPRS connection is active.

Record sound

1. Select Menu > Media > Recorder.

To use the graphical keys,

, or

, on the display, scroll left or right to

the desired key, and select it.

2. To start the recording, select . To start the recording during a call, select

Options > Record. While recording a call, all parties to the call hear a faint

beeping sound approximately every 5 seconds. When recording a call, hold the

phone in the normal position near to your ear.

3. To end the recording, select

. The recording is saved in Gallery >

Recordings.

4. To listen to the latest recording, select Options > Play last recorded.

5. To send the last recording using Bluetooth, or a multimedia message, select

Options > Send last recorded.

List of recordings

Select Menu > Media > Recorder > Options > Recordings list. The list of folders

in the Gallery is shown. Open Recordings to see the list with recordings. Select

Options to select options for files in the Gallery. See Gallery, page 82.

Equalizer

You can control the sound quality when using the music player by amplifying or

attenuating frequency bands.

Select Menu > Media > Equaliser.

To activate a set, scroll to one of the equalizer sets, and select Activate.

To view, edit, or rename a selected set, select Options > View, Edit, or Rename.

Not all sets can be edited or renamed.

■ Organiser

Alarm clock

You can set the phone to alarm at a desired time. Select Menu >

Organiser > Alarm clock.

To set the alarm, select Alarm time, and enter the alarm time. To change the alarm

time when the alarm time is set, select On. To set the phone to alert you on

selected days of the week, select Repeat alarm.

To select the alarm tone or set a radio channel as the alarm tone, select Alarm

tone. If you select the radio as an alarm tone, connect the headset to the phone.

The phone uses the last channel you listened to as the alarm, and the alarm plays

through the loudspeaker. If you remove the headset or switch off the phone, the

default alarm tone replaces the radio.

To set a snooze time-out, select Snooze time-out.

Stop the alarm

The phone sounds an alert tone, and flashes Alarm! and the current time on the

display, even if the phone was switched off. To stop the alarm, select Stop. If you

let the phone continue to sound the alarm for a minute or select Snooze, the

alarm stops for the selected snooze time-out and then resumes.

If the alarm time is reached while the device is switched off, the device switches itself on

and starts sounding the alarm tone. If you select Stop, the device asks whether you want to

activate the device for calls. Select No to switch off the device or Yes to make and receive

calls. Do not select Yes when wireless phone use may cause interference or danger.

Calendar

Select Menu >Organiser > Calendar.

The current day is indicated by a frame. If there are any notes set for the day, the

day is in bold type. To view the day notes, select View. To view a week, select

Options > Week view. To delete all notes in the calendar, select the month or

week view, and select Options > Delete all notes.

Other options for the calendar day view can be make a note; delete, edit, move, or

repeat a note; copy a note to another day; send a note with Bluetoothtechnology;

or send a note to the calendar of another compatible phone as a text message or

multimedia message. In Settings you can set the date and time settings. In the

Auto-delete notes option you can set the phone to delete old notes automatically

after a specified time.

Make a calendar note

Select Menu > Organiser > Calendar. Scroll to the date you want, select

Options > Make a note and select one of the following note types:

Meeting,

Call,

Birthday,

Memo or

Reminder.

A note alarm

The phone beeps, and displays the note. With a call note

on the display, to call

the displayed number, press the call key. To stop the alarm and to view the note,

select View. To stop the alarm for 10 minutes, select Snooze. To stop the alarm

without viewing the note, select Exit.

To-do list

To save a note for a task that you must do, select Menu > Organiser > To-do list.

To make a note if no note is added, select Add; otherwise, select Options > Add.

Write the note, and select Save. Select the priority, the deadline and the alarm

type for the note.

To view a note, scroll to it, and select View.

You can also select an option to delete the selected note and delete all the notes

that you have marked as done. You can sort the notes by priority or by deadline,

send a note to another phone as a text message or a multimedia message, save a

note as a calendar note, or access the calendar.

While viewing a note, you can also select an option to edit the deadline or priority

for the note, or mark the note as done.

Notes

To use this application for writing and sending notes, select Menu > Organiser >

Notes. To make a note if no note is added, select Add; other wise, select Options >

Make a note. Write a note and select Save.

Other options for notes include deleting, and editing a note. While editing a note,

you can also exit the text editor without saving the changes. You can send the

note to compatible devices using a text message, a multimedia message, or

Bluetooth wireless technology. If the note is too long to be sent as a text message,

the phone asks you to delete the appropriate number of characters from your

note.

Wallet

In Wallet, you can save personal information, such as credit card numbers,

addresses, and access codes to services that require a user name and password.

You can easily retrieve the information in the wallet to fill in online forms, if the

service supports it.

The first time you access the wallet, you define the wallet code that protects your

encrypted data. At Create wallet code:, enter the code, and select OK to confirm.

At Verify wallet code: enter the code again, and select OK. See also Wallet code,

page 16.

If you want to delete all the content of the wallet and the wallet code, enter

*#7370925538# (*#res wallet# in letters) in the standby mode. You also need the

security code of the phone; see Security code, page 14.

To add or edit contents, open the Wallet menu. To use the content of the wallet in

a mobile service, access the wallet from the browser. See Web, page 102.

Access the wallet menu

To access the wallet menu, select Menu > Organiser > Wallet. Enter your wallet

code, and select OK; see Wallet settings, page 96. Select from the following

options:

Wallet profiles — to create card combinations for different services. A wallet

profile is helpful if the service asks you to fill in many data items. You can select

the appropriate wallet profile instead of selecting different cards separately.

Cards — to save personal card information. You can save payment card, loyalty

card, and access card information, such as user name and password combinations

for different services, addresses, and user data. See Save card details, page 94.

Tickets — to save the notifications of e-tickets that you bought through a mobile

service. To view the tickets, select Options > View.

Receipts — to save receipts of mobile purchases.

Personal notes — to save all kinds of personal information that you want to keep

protected by the wallet PIN code. See Personal notes, page 95.

Settings— to modify wallet settings. See Wallet settings, page 96.

Save card details

Access the wallet, and select Cards. Select the card type to save details: Payment

cards, Loyalty cards, Access cards, User info cards, or Address cards. If no card is

added, select Add; otherwise, select Options > Add new. Fill in the fields for the

details.

If supported by your service provider, you can also receive card information to

your phone as a configuration message. You are notified of the card category. For

availability of receiving card information as configuration settings, contact the

card issuer or service provider.

Personal notes

You can save personal notes, such as account numbers, passwords, or codes.

1. Access the wallet, and select Personal notes. If no note is added, select Add;

otherwise, select Options > Add new. Enter the note and a title for it.

Select Options to edit a selected note, sort notes by name or date, or delete

notes.

2. To view a note, scroll to it, and select View.

3. When viewing a note, select Edit to edit it. Select Options and from the

following options:

Send via text msg. — to copy the note as a text message.

Copy to calendar — to copy the note to the calendar as a memo.

Use detail — to extracting numbers, e-mail addresses and Web addresses from

a note.

Delete— to delete the note.

Create a wallet profile

When you have saved your personal card details, you can combine them together

into a wallet profile. You can use the profile to retrieve wallet data from different

cards while browsing.

1. Access the wallet, and select Wallet profiles.

2. To create a new wallet profile if no profile is added, select Add. Otherwise,

select Options > Add new.

3. Fill in the following fields. Some of the fields contain data that is selected from

the wallet. You must save this data before you can create a wallet profile.

Select payment card next and select a card from the payment card list.

Select loyalty card next and select a card from the loyalty card list.

Select access card next and select a card from the access card list.

Select user info card next and select a card from the user data card list.

Select billing address next and select an address from the address card list.

Select shipping address next and select an address from the address card list.

Select receipt delivery address next and select an address from the address

card list.

Select receipt delivery method next and select the means of delivery: To

phone number or To e-mail address.

Wallet profile name: enter a name for the profile.

Wallet settings

Access the wallet, and select Settings. To change the wallet code, select Change

code. To set the radio frequency identification (RFID) code and type, select RFID >

RFID codeand RFID type. RFID is technology that helps secure your commercial

transactions.

Wallet purchases

To do your shopping, access the desired Web site that supports the wallet. The

service must support the Electronic Commerce Modeling Language specification.

See Connect to a service, page 103. Choose the product you want to buy and read

carefully all provided information before your purchase. The text may not fit

within a single screen. Therefore, make sure to scroll through and read all of the

text before your purchase.

To pay for the items you wish to buy, the phone asks whether you want to use the

wallet. The phone also asks for your wallet PIN code.

Select the card you want to pay with from the Payment cardslist. If the data form

you receive from the service provider supports the Electronic Commerce Modeling

Language specification, the phone automatically fills in the credit card

information or the wallet profile from the wallet.

Approve the purchase, and the information is forwarded.

You may receive an acknowledgement or a digital receipt of the purchase.

To close the wallet, select Close wallet. If you do not use the wallet for 5 minutes,

it closes automatically.

A cache is a memory location that is used to store data temporarily. If you have tried to

access or have accessed confidential information requiring passwords empty the cache

after each use. To empty the cache, see Cache memory, page 109.

Calculator

The calculator in your phone adds, subtracts, multiplies, divides, calculates the

square and the square root and converts currency values.

Note: This calculator has limited accuracy and is designed for simple calculations.

Select Menu > Organiser > Calculator. When 0 is displayed on the

screen, enter the first number in the calculation, press the # key for a decimal

point. Select Options >Add, Subtract, Multiply, Divide, Square, Square root, or

Change sign. Enter the second number. For a total, select Equals. As many times

as it is necessary, select Options and the option again. To start a new calculation,

first select and hold Clear.

Performing a currency conversion

Select Menu > Organiser > Calculator. To save the exchange rate, select

Options > Exchange rate. Select either of the displayed options. Enter the

exchange rate, press the # key for a decimal point, and select OK. The exchange

rate remains in the memory until you replace it with another one. To perform the

currency conversion, enter the amount to be converted, select Options > In

domestic, or In foreign.

Countdown timer

Select Menu > Organiser > Countdown timer. Enter the alarm time in hours,

minutes, and seconds, and select OK. If you wish, write your own note text that is

displayed when the time expires. To start the countdown timer, select Start. To

change the countdown time, select Change time. To stop the timer, select Stop

timer.

If the alarm time is reached when the phone is in the standby mode, the phone

sounds a tone and flashes the note text if it is set or Countdown time up. Stop the

alarm by pressing any key. If no key is pressed, the alarm automatically stops

within 30 seconds. To stop the alarm and to delete the note text, select Exit. To

restart the countdown timer, select Restart.

Stopwatch

You can measure time, take intermediate times, or take lap times using the

stopwatch. During timing, the other functions of the phone can be used. To set the

stopwatch timing in the background, press the end key.

Using the stopwatch or allowing it to run in the background when using other features

increases the demand on battery power and reduces the battery life.

Select Menu > Organiser > Stopwatch and from the following options:

Split timing — to take intermediate times. To start the time observation, select

Start. Select Split every time that you want to take an intermediate time. To stop

the time observation, select Stop. To save the measured time, select Save. To start

the time observation again, select Options > Start. The new time is added to the

previous time. To reset the time without saving it, select Reset. To set the

stopwatch timing in the background, press the end key.

Lap timing — to take lap times. To set the stopwatch timing in the background,

press the end key.

Continue — to view the timing that you have set in the background.

Show last — to view the most recently measured time if the stopwatch is not

reset.

View times or Delete times — to view or delete the saved times.

■ Applications

Games

Your phone software includes some games.

Launch a game

Select Menu > Applications > Games. Scroll to the desired game, and select

Open, or press the call key.

For options related to a game, see Other application options, page 101.

Game downloads

Select Menu > Applications > Options > Downloads > Game downloads. The list

of available bookmarks is shown. Select More bookmarks to access the list of

bookmarks in the Web menu; see Bookmarks, page 107.

Only install and use applications and other software from sources that offer adequate

security and protection against harmful software.

Game settings

To set sounds, lights, and shakes for the game, select Menu > Applications >

Options > Application settings.

Collection

Your phone software includes some Java applications specially designed for this

Nokia phone.

100

Launching an application

Select Menu > Applications > Collection. Scroll to an application, and select

Open, or press the call key.

Other application options

Delete— to delete the application or application set from the phone.

Details — to give additional information about the application.

Update version — to check if a new version of the application is available for

download from Web (network service).

Web page — to provide further information or additional data for the application

from an Internet page. This feature must be supported by the network. It is only

shown if an Internet address has been provided with the application.

Application access — to restrict the application from accessing the network.

Different categories are shown. Select in each category, if available, one of the

following permissions: Ask every time and the phone asks always for net access,

Ask first time only and the phone asks on first attempt to net access, Always

allowed to allow the net access, or Not allowed to not allow the net access.

Download an application

Your phone supports J2ME Java applications. Make sure that the application is

compatible with your phone before downloading it.

Only install and use applications and other software from sources that offer adequate

security and protection against harmful software.

You can download new Java applications in different ways:

101

Select Menu > Applications > Options > Downloads > App. downloads, and the

list of available bookmarks is shown. Select More bookmarks to access the list of

bookmarks in the Web menu. Select the appropriate bookmark to connect to the

desired page. For the availability of different services, pricing, and tariffs, contact

your service provider.

Select Menu > Web > Downloads. Download an appropriate application or game.

See Download files, page 108.

Use the game download function. See Game downloads, page 100.

Use the Nokia Application Installer from PC Suite to download the applications to

your phone.

Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does

not warrant or endorse these sites. If you choose to access them, you should take the same

precautions, for security or content, as you would with any Internet site.

When downloading an application, it may be saved in the Games menu instead of

the Applications menu.

■ Web

You can access various mobile Internet services with your phone

browser.

Important: Use only services that you trust and that offer adequate

security and protection against harmful software.

Check the availability of these services, pricing, tariffs, and instructions with your

service provider.

102

With the phone browser you can view the services that use wireless markup

language (WML) or extensible hypertext markup language (XHTML) on their

pages. Appearance may vary due to screen size. You may not be able to view all

details of the Internet pages.

Set up browsing

You may receive the configuration settings required for browsing as a

configuration message from the network operator or service provider that offers

the service that you want to use. See Configuration settings service, page 16. You

can also enter all the configuration settings manually. See Configuration,

page 79.

Connect to a service

First, verify that the correct configuration settings of the service that you want to

use are activated.

1. To select the settings for connecting to the service, select Menu > Web >

Settings > Configuration settings.

2. Select Configuration. Only the configurations that support browsing service

are shown. Select a service provider, Default, or Personal config. for browsing.

See Set up browsing, page 103.

Select Account and a browsing service account contained in the active

configuration settings.

103

Select Display terminal window > Yes to perform manual user authentication

for intranet connections.

Secondly, make a connection to the service in one of the following ways:

• Select Menu > Web > Home; or in the standby mode, press and hold 0.

• To select a bookmark of the service, select Menu > Web > Bookmarks.

• To select the last URL, select Menu > Web > Last web address.

• To enter the address of the service, select Menu > Web > Go to address, enter

the address of the service, and select OK.

Browse pages

After you make a connection to the service, you can start browsing its pages. The

function of the phone keys may vary in different services. Follow the text guides

on the phone display. For more information, contact your service provider.

If packet data is selected as the data bearer,

display during browsing. If you receive a call or a text message, or make a call

during a packet data connection, is shown on the top right of the display to

is shown on the top left of the

indicate that the packet data connection is suspended (on hold). After a call the

phone tries to reconnect the packet data connection.

Browse with phone keys

Scroll any direction to browse through the page.

To select a highlighted item, press the call key, or select Select.

104

To enter letters and numbers, press the keys, 0 to 9. To enter special characters,

press *.

Options while browsing

The following options may be available: Nokia.com, Use wallet info, Home,

Shortcuts, Add bookmark, Bookmarks, Page options, History, Download, Other

options, Reload, Quit. The service provider may also offer other options.

A cache is a memory location that is used to store data temporarily. If you have tried to

access or have accessed confidential information requiring passwords, empty the cache

after each use. The information or services you have accessed is stored in the cache. To

empty the cache, see Cache memory, page 109.

Direct calling

The browser supports functions that you can access while browsing. You can make

a phone call, send DTMF tones while a voice call is in progress, and save a name

and a phone number from a page.

Appearance settings

While browsing, select Options > Other options > Appearance settings; or in the

standby mode, select Menu > Web > Settings > Appearance settings and from

the following options:

Text wrapping > On — to set the text to continue on the next line on the display.

If you select Off, the text is abbreviated.

Font size > Extra small, Small, or Medium — to set the font size.

105

Show images > No — to hide pictures on the page. This can speed up the browsing

of pages that contain a lot of pictures.

Alerts > Alert for unsecure connection > Yes — to set the phone to alert when a

encrypted connection changes to an unencrypted one during browsing.

Alerts > Alert for unsecure items > Yes — to set the phone to alert when a

encrypted page contains an unsecure item. These alerts do not guarantee a secure

connection. For more information, see Browser security, page 109.

Character encoding > Content encoding— to select the encoding for the browser

page content.

Character encoding > Unicode (UTF-8) web addresses > On — to set the phone

to send a URL as a UTF-8 encoding. You may need this setting when you access a

Web page created in foreign language.

A cookie is data that a site saves in the cache memory of your phone. Cookies are

saved until you clear the cache memory. See Cache memory, page 109.

While browsing, select Options > Other options > Security > Cookie settings; or

in the standby mode, select Menu > Web > Settings > Security settings >

Cookies. To allow or prevent the phone receiving cookies, select Allow or Reject.

Scripts over secure connection

You can select whether to allow the running of scripts from a secure page. The

phone supports WML scripts.

106

1. While browsing, select Options > Other options > Security settings > Script

settings; or in the standby mode, select Menu > Web > Settings > Security

settings > Scripts over secure connection.

2. To allow the scripts, select Allow.

Bookmarks

You can save page addresses as bookmarks in the phone memory.

1. While browsing, select Options > Bookmarks; or in the standby mode, select

Menu > Web > Bookmarks.

2. Scroll to a bookmark, and select it; or press the call key to make a connection

to the page associated with the bookmark.

3. Select Options to view, edit, delete, or send the bookmark; create a new

bookmark; or save the bookmark to a folder.

Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does

not warrant or endorse these sites. If you choose to access them, you should take the same

precautions, for security or content, as you would with any Internet site.

Receive a bookmark

When you have received a bookmark that is sent as a bookmark, 1 bookmark

received is displayed. To save the bookmark, select Show > Save. To view or delete

the bookmark, select Options > View or Delete. To discard the bookmark directly

after you have received the bookmark, select Exit > OK.

107

Download files

To download more tones, images, games, or applications to your phone (network

service), select Menu > Web > Download > Tone downloads, Graphic

downloads, Game downloads, Video downloads, Theme downloads, or App.

downloads.

Important: Only install and use applications and other software from sources that

offer adequate security and protection against harmful software.

To save all downloaded files automatically in Gallery, select Menu > Web >

Settings > Downloading settings > Automatic saving > On.

Service inbox

The phone is able to receive service messages (pushed messages) sent by your

service provider (network service). Service messages are notifications of, for

example, news headlines, and they may contain a text message or an address of a

service.

To access the Service inbox in the standby mode, when you have received a

service message, select Show. If you select Exit, the message is moved to the

Service inbox. To access the Service inbox later, select Menu > Web > Service

inbox.

To access the Service inbox while browsing, select Options > Other options >

Service inbox. Scroll to the message you want, and to activate the browser and

download the marked content, select Retrieve. To display detailed information on

the service notification, or to delete the message, select Options > Details or

Delete.

108

Service inbox settings

Select Menu > Web > Settings > Service inbox settings.

To set whether you want to receive service message, select Service messages >

On or Off.

To set the phone to receive service messages only from content authors approved

by the service provider, select Message filter > On. To view the list of the

approved content authors, select Trusted channels.

To set the phone to automatically activate the browser from the standby mode

when the phone has received a service message, select Automatic connection >

On. If you select Off, the phone activates the browser only after you select

Retrieve when the phone has received a service message.

Cache memory

A cache is a memory location that is used to store data temporarily. If you have tried to

access or have accessed confidential information requiring passwords, empty the cache

after each use. The information or services you have accessed is stored in the cache.

To empty the cache, while browsing, select Options > Other options > Clear the

cache; in the standby mode, select Menu > Web > Clear the cache.

Browser security

Security features may be required for some services, such as online banking or

shopping. For such connections you need security certificates and possibly a

security module, which may be available on your SIM card. For more information,

contact your service provider.

109

Security module

The security module improves security services for applications requiring a

browser connection, and allows you to use a digital signature. The security module

may contain certificates as well as private and public keys. The certificates are

saved in the security module by the service provider.

Select Menu > Web > Settings > Security settings > Security module settings

and from the following options:

Security module details — to show the security module title, status,

manufacturer, and serial number.

Module PIN request — to set the phone to ask for the module PIN when using

services provided by the security module. Enter the code, and select On. To disable

the module PIN request, select Off.

Change module PIN— to change the module PIN, if allowed by the security

module. Enter the current module PIN code, then enter the new code twice.

Change signing PIN — to change the signing PIN code for the digital signature.

Select the signing PIN you want to change. Enter the current PIN code, then enter

the new code twice.