Nokia 6610i User Manual

User’s Guide for Nokia 6610i phone

9230846

Issue 1

Under no circumstances shall Nokia be responsible for any loss of data or income or any special,

incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of

any kind, either express or implied, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or

contents of this document. Nokia reserves the right to revise this document or withdraw it at any time

without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to

you.

Contents

FOR YOUR SAFETY ..............................................................................................10

General information............................................................................................14

Access codes ...............................................................................................................................................14

Security code (5 to 10 digits).............................................................................................................14

PIN and PIN2 codes (4 to 8 digits), Module PIN and Signing PIN...........................................14

PUK and PUK2 codes (8 digits)...........................................................................................................15

Barring password (4 digits).................................................................................................................15

Wallet code (4 to 10 digits)................................................................................................................15

Overview of the functions of the phone...........................................................16

Camera..........................................................................................................................................................16

Multimedia messaging service (MMS) ................................................................................................16

Polyphonic sound (MIDI).........................................................................................................................16

JavaTM applications .................................................................................................................................17

General Packet Radio Service (GPRS) ..................................................................................................17

Over the Air (OTA) settings service.......................................................................................................18

1. Your phone.......................................................................................................19

Keys and connectors.................................................................................................................................19

Standby mode.............................................................................................................................................21

Screen saver.............................................................................................................................................22

Wallpaper.................................................................................................................................................22

Essential indicators in standby mode...............................................................................................22

Headset.........................................................................................................................................................24

Putting on the wrist strap.......................................................................................................................25

2. Getting started ................................................................................................26

Installing the SIM card and the battery..............................................................................................26

Charging the battery ................................................................................................................................29

Switching the phone on and off ...........................................................................................................30

Keypad lock (Keyguard) ...........................................................................................................................31

Changing the covers.................................................................................................................................33

3. Call functions ..................................................................................................35

Making a call ..............................................................................................................................................35

Speed dialling a phone number.........................................................................................................36

Answering or rejecting an incoming call............................................................................................36

Call waiting..............................................................................................................................................37

Options during a call................................................................................................................................37

4. Writing text.....................................................................................................39

Setting predictive text input on or off................................................................................................39

Using predictive text input.....................................................................................................................39

Writing compound words....................................................................................................................40

Using traditional text input....................................................................................................................41

Tips for writing text..................................................................................................................................41

5. Using the menu ...............................................................................................43

Accessing a menu function ....................................................................................................................43

List of menu functions.............................................................................................................................45

6. Menu functions...............................................................................................50

Messages (Menu 1)...................................................................................................................................50

Text messages (SMS).............................................................................................................................50

Multimedia messages ...........................................................................................................................57

Multimedia messages memory full...................................................................................................61

Deleting messages .................................................................................................................................61

Chat............................................................................................................................................................62

Voice messages.......................................................................................................................................63

Info messages..........................................................................................................................................64

Message settings....................................................................................................................................64

Service commands.................................................................................................................................68

Call register (Menu 2) ..............................................................................................................................68

Recent calls lists.....................................................................................................................................68

Call counters and call timers..............................................................................................................69

Contacts (Menu 3) ....................................................................................................................................70

Selecting settings for contacts ..........................................................................................................71

Saving names and phone numbers (Add name)............................................................................71

Searching for a name in contacts.....................................................................................................73

Editing a name, number or text item or changing an image....................................................74

Deleting names, numbers and images.............................................................................................74

Copying contacts....................................................................................................................................75

Sending and receiving a business card............................................................................................76

Speed dials...............................................................................................................................................77

Info numbers and service numbers...................................................................................................77

My numbers.............................................................................................................................................78

Caller groups ...........................................................................................................................................78

Profiles (Menu 4).......................................................................................................................................79

Settings (Menu 5) ....................................................................................................................................80

Personal shortcuts .................................................................................................................................80

Time and date settings.........................................................................................................................80

Call settings.............................................................................................................................................82

Phone settings ........................................................................................................................................84

Display settings.......................................................................................................................................86

Tone settings ...........................................................................................................................................88

Enhancement settings..........................................................................................................................89

Security settings.....................................................................................................................................90

Restore factory settings.......................................................................................................................91

Radio (Menu 6)...........................................................................................................................................92

Tuning a radio channel.........................................................................................................................92

Using the radio .......................................................................................................................................93

Camera (Menu 7).......................................................................................................................................94

To take a photo.......................................................................................................................................95

Camera settings......................................................................................................................................96

Gallery (Menu 8)........................................................................................................................................96

Organiser (Menu 9)...................................................................................................................................99

Alarm clock..............................................................................................................................................99

Calendar................................................................................................................................................. 100

To-do list ............................................................................................................................................... 103

Games (Menu 10)................................................................................................................................... 104

Launching a game............................................................................................................................... 104

Memory status for games................................................................................................................. 105

Game settings...................................................................................................................................... 105

Applications (Menu 11) ........................................................................................................................ 106

Launching an application ................................................................................................................. 106

Other options available for an application or application set............................................... 106

Downloading an application............................................................................................................ 107

Memory status for applications...................................................................................................... 108

Extras (Menu 12).................................................................................................................................... 109

Calculator.............................................................................................................................................. 109

Countdown timer................................................................................................................................ 110

Stopwatch............................................................................................................................................. 110

Wallet..................................................................................................................................................... 112

Synchronisation................................................................................................................................... 115

Connectivity (Menu 13)........................................................................................................................ 118

Infrared .................................................................................................................................................. 118

GPRS ....................................................................................................................................................... 119

Services (Menu 14) ................................................................................................................................ 121

Basic steps for accessing and using services.............................................................................. 121

Setting up the phone for a service................................................................................................. 122

Making a connection to a service.................................................................................................. 123

Browsing the pages of a service..................................................................................................... 124

Disconnect from a service ................................................................................................................ 125

Appearance settings of the multi-mode browser...................................................................... 126

Cookies................................................................................................................................................... 126

Bookmarks............................................................................................................................................. 127

Downloading ........................................................................................................................................ 128

Service inbox........................................................................................................................................ 128

The cache memory.............................................................................................................................. 129

Browser security.................................................................................................................................. 129

Go to (Menu 15) ..................................................................................................................................... 133

SIM services (Menu 16)........................................................................................................................ 133

7. PC Connectivity ............................................................................................ 134

PC Suite..................................................................................................................................................... 134

GPRS, HSCSD and CSD ...................................................................................................................... 135

Using data communication applications......................................................................................... 136

8. Battery information...................................................................................... 137

Charging and Discharging.................................................................................................................... 137

CARE AND MAINTENANCE.............................................................................. 139

ADDITIONAL SAFETY INFORMATION.............................................................. 141

FOR YOUR SAFETY

Read these simple guidelines. Not following them may be dangerous or illegal. Read the

complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or when it

may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while

driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could affect

performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELLING

Don't use the phone at a refuelling point. Don't use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Don't use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Don't

touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible

products.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety

instructions. Do not connect incompatible products.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all important

information stored in your phone.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press

needed to clear the display and return to the start screen. Key in the emergency

number, then press . Give your location. Do not end the call until given

permission to do so.

as many times as

■ ABOUT YOUR DEVICE

The wireless device described in this guide is approved for use on the EGSM 900, GSM 1800

and GSM1900 network. Contact your service provider for more information about networks.

When using the features in this device, obey all laws and respect privacy and legitimate

rights of others.

Warning: To use any features in this device, other than the alarm clock, the device

must be switched on. Do not switch the device on when wireless device use may

cause interference or danger.

■ Network Services

To use the phone you must have service from a wireless service provider. Many of the

features in this device depend on features in the wireless network to function. These

Network Services may not be available on all networks or you may have to make specific

arrangements with your service provider before you can utilize Network Services. Your

service provider may need to give you additional instructions for their use and explain what

charges will apply. Some networks may have limitations that affect how you can use

Network Services. For instance, some networks may not support all language-dependent

characters and services.

Your service provider may have requested that certain features be disabled or not activated

in your device. If so, they will not appear on your device menu. Contact your service provider

for more information.

■ Shared Memory

The following features in this device may share memory: phone book, text and multimedia

messages, images and ringing tones in gallery, calendar, to-do notes, and Java games and

applications. Use of one or more of these features may reduce the memory available for the

remaining features sharing memory. For example, saving many images, bookmarks, Java

applications, etc. may use all of the available memory. Your device may display a message

that the memory is full when you try to use a shared memory feature. In this case, delete

some of the information or entries stored in the shared memory features before continuing.

Some of the features , such as cache, booksmarks, and security certificates may have a

certain amount of memory specially allotted to them in addition to the memory shared with

other features.

■ Enchancements and batteries

Always switch the device off and disconnect the charger before removing the battery.

Check the model number of any charger before use with this device. This device is intended

for use when supplied with power from ACP-12, ACP-8, ACP-7, LCH-9, and LCH-12.

Warning: Use only batteries, chargers, and enhancements approved by Nokia for

use with this particular model. The use of any other types may invalidate any

approval or warranty, and may be dangerous.

For availability of approved enhancements, please check with your dealer. When you

disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

Your device and its enhancements may contain small parts. Keep them out of reach of small

children.

A few practical rules about accessories and enhancements.

•

Keep all accessories and enhancements out of the reach of small children.

When you disconnect the power cord of any accessory or enhancement, grasp and pull

the plug, not the cord.

•

Check regularly that enhancements installed in a vehicle are mounted and are operating

properly.

Installation of any complex car enhancements must be made by qualified personnel only.

General information

■ Access codes

Security code (5 to 10 digits)

The security code helps to protect your phone against unauthorised use. The pre-

set code is 12345. Change the code, and keep the new code secret and in a safe

place separate from your phone. To change the code, and to set the phone to

request the code, see Security settings on page 90.

PIN and PIN2 codes (4 to 8 digits), Module PIN and Signing PIN

• The PIN (Personal Identification Number) code protects your SIM card against

unauthorised use. The PIN code is usually supplied with the SIM card. Set the

phone to request the PIN code each time the phone is switched on, see

Security settings on page 90.

• The PIN2 code may be supplied with the SIM card and is required to access

some functions, such as charging unit counters.

• The module PIN is required to access the information in the security module.

See Security module on page 130. The module PIN is supplied with the SIM

card if the SIM card has a security module in it.

• The signing PIN is required for the digital signature. See Digital signature on

page 132. The signing PIN is supplied with the SIM card if the SIM card has a

security module in it.

If you key in an incorrect PIN code three times in succession, the phone may

display SIM blocked or PIN code blocked, for example, and ask you to enter the

PUK code.

PUK and PUK2 codes (8 digits)

The PUK (Personal Unblocking Key) code is required to change a blocked PIN code.

The PUK2 code is required to change a blocked PIN2 code.

If the codes are not supplied with the SIM card, contact your network operator or

service provider for the codes.

Barring password (4 digits)

The barring password is required when using the Call barring service, see Security

settings on page 90. You can obtain the password from your service provider.

Wallet code (4 to 10 digits)

The wallet code is required to access the wallet services. If you key in an incorrect

wallet code several times, the wallet application is blocked for five minutes. For

further information, see Wallet on page 112.

Overview of the functions of the phone

Your phone provides many functions, which are practical for daily use, such as a

calendar, a clock, an alarm clock, a camera, a radio, and many more. Changing the

covers on page 33.

■ Camera

Your phone has a built-in camera that can be used for taking pictures. For sending

a picture via the Multimedia Messaging Service (MMS), see Multimedia messages

on page 57, see Camera (Menu 7) on page 94. The pictures can also be used as

wallpapers in standby mode or as thumbnail pictures in Contacts.

You can save your pictures in a compatible PC using the PC Suite software.

■ Multimedia messaging service (MMS)

The phone is able to send and receive multimedia messages composed of text,

sound and a picture. You can save the pictures and ringing tones for personalising

your phone. See Multimedia messages on page 57.

■ Polyphonic sound (MIDI)

Polyphonic sound consists of several sound components played at the same time.

Your phone has sound components from over 40 instruments, but the phone can

only play a few instruments at the same time. Polyphonic sounds are used, for

example, in ringing tones and message alert tones. The phone supports Scalable

Polyphonic MIDI (SP-MIDI) format.

You can receive polyphonic ringing tones via a multimedia service, see Reading

and replying to a multimedia message on page 59, or you can download them via

the gallery menu, see Gallery (Menu 8) on page 96 or via PC suite, see PC Suite on

page 134.

■ Java^TMapplications

Your phone supports Java 2 Micro Edition, J2ME^TM, and includes some JavaTM

applications and games that have been specially designed for mobile phones. You

can download new applications and games to your phone, see Applications (Menu

11) on page 106.

■ General Packet Radio Service (GPRS)

GPRS technology is a network service that allows mobile phones to be used for

sending and receiving data over an Internet Protocol (IP) -based network. GPRS is

a data bearer that enables wireless access to data networks such as the Internet.

The applications that may use GPRS are MMS and SMS messaging (SMS, Short

Message Service), browsing sessions, Java application downloading and the PC

dial-up (for example, Internet and e-mail).

Note that your phone supports three simultaneous GPRS connections. For

example, you can receive multimedia messages and, at the same time, have an

ongoing PC dial-up connection or browsing session.

Before you can use GPRS technology

• Contact your network operator or service provider for availability and

subscription to the GPRS service.

• Save the GPRS settings for each of the applications used over GPRS.

See Setting up the phone for a service on page 122, Message settings on page

64 and GPRS on page 119.

Pricing for GPRS and applications

For more detailed information on pricing, contact your network operator or

service provider.

■ Over the Air (OTA) settings service

In order to use MMS, GPRS and other wireless services, you need to have proper

settings on your phone. You may be able to receive the settings directly as an OTA

message and you need to save the settings on your phone. For more information

on the availability of the settings, contact your network operator, service provider

or nearest authorised Nokia dealer.

1. Your phone

■ Keys and connectors

1. Power key

Switches the phone on and off.

When the keypad is locked, pressing

the power key briefly turns the

phone’s display lights on for

approximately 15 seconds.

2. Volume keys

Adjust the volume of the earpiece or

the loudspeaker, or the headset

when it is connected to the phone.

3. 4-way scroll keys

and

Enables, for example, scrolling

through contacts, menus or settings

and in calendar, or moving the

cursor when writing text.

4. Selection keys

and

The function of these keys depends on the guiding text shown on the display

above the keys. See Standby mode on page 21.

dials a phone number, and answers a call. In standby mode it shows the

list of the most recently called numbers.

ends an active call. Exits from any function.

enter numbers and characters.

and

are used for various purposes in different functions.

1. Charger connector

2. Pop-Port^TMconnector used, for

example, for headsets and the

data cable.

3. Infrared (IR) port

4. Camera lens on the back cover of

the phone.

■ Standby mode

When the phone is ready for use, and you have not keyed in any characters, the

phone is in standby mode.

1. Shows the name of the network or the operator logo to indicate in which

cellular network the phone is currently being used.

2. Shows the signal strength of the cellular network at your current location. The

higher the bar, the stronger the signal.

3. Shows the battery charge level. The higher the bar, the more power in the

battery.

4. The left selection key in standby mode is Menu.

5. The right selection key in standby mode is Contacts or Go to or it has an

operator specific name. If you press the right selection key when it is

• Contacts, you can access the Contacts menu.

• the operator specific key, you can access an operator’s homepage.

• Go to, you can then scroll to the specific function and select it. To set the

functions for your personal shortcut, see Personal shortcuts on page 80.

Same functions can also be activated if you select the menu Go to, see Go

to (Menu 15) on page 133.

Screen saver

The phone automatically activates a screen saver in standby mode after a certain

length of time if no phone function is used. See Screen saver on page 87. Press any

key to deactivate the screen saver.

Wallpaper

You can set your phone to display a background picture, wallpaper, when the

phone is in standby mode. See Wallpaper on page 86.

Essential indicators in standby mode

You have received one or several text or picture messages. See Reading

and replying to an SMS message or an e-mail on page 53.

You have received one or several multimedia messages. See Reading and

replying to a multimedia message on page 59.

The phone’s keypad is locked. See Keypad lock (Keyguard) on page 31.

The phone does not ring for an incoming call or text message when

Incoming call alert is set to Off and Message alert tone is set to Off. See

Tone settings on page 88.

The alarm clock is set to On. See Alarm clock on page 99.

The countdown timer is running. See Countdown timer on page 110.

The stopwatch is running in the background. See Stopwatch on page 110.

When the GPRS connection mode Always online is selected and the GPRS

service is available, the indicator is shown on the top left of the display.

Refer to GPRS connection on page 119.

When a GPRS connection is established, the indicator is shown on the top

left of the display. Refer to GPRS connection on page 119 and Browsing

the pages of a service on page 124.

The GPRS connection is suspended (on hold), for example if there is an

incoming or outgoing call during a GPRS dial-up connection. The

indicator is shown on the top right of the display.

Infrared connection indicator, see Infrared on page 118.

All your calls are diverted to another number, Divert all voice calls. If you

have two phone lines, the divert indicator for the first line is

and for

the second line . See Call divert on page 82.

or If you have two phone lines, the indicator displays the selected phone line.

See Line for outgoing calls on page 83.

The loudspeaker has been activated, see Options during a call on page 37.

Calls are limited to a closed user group. See Security settings on page 90.

The timed profile is selected. See Profiles (Menu 4) on page 79.

A headset, handsfree, loopset or music stand enhancement is connected

to the phone.

To enable the phone to show the time and date in standby mode, see Clock on

page 80 and Date on page 81.

■ Headset

Warning: When using the stereo headset your ability to hear outside sounds may

be affected. Do not use the stereo headset where it can endanger your safety.

Connect your headset to the Pop-Port connector as shown

in the picture.

You can carry the stereo headset HDS-3 as

shown in the picture.

■ Putting on the wrist strap

Thread the strap as shown in the picture and then

tighten it.

2. Getting started

■ Installing the SIM card and the battery

Keep all SIM cards out of the reach of small children. For availability and information on

using SIM card services, contact your SIM card vendor. This may be the service provider,

network operator, or other vendor.

The SIM card and its contacts can easily be damaged by scratches or bending, so

be careful when handling, inserting or removing the card.

Before installing the SIM card, always make sure that the phone is switched off

and disconnected from any enhancement and then remove the battery.

1. To remove the back cover from the phone:

With the back of the phone facing you, push the back cover release button (1)

and remove the cover from the phone (2).

2. Remove the battery by lifting it from the end

from the finger grip (3).

3. To release the SIM card holder, slide the card

holder backwards (4) and open it by lifting (5).

4. Insert the SIM card into the SIM card holder (6).

Make sure that the SIM card is properly inserted

and that the golden contact area on the card is

facing downwards.

5. Close the SIM card holder (7) and slide it forwards to lock it (8).

6. Replace the battery (9).

7. To replace the back cover:

First place the top of the back cover over the

locking catch on the top of the phone (10).

Direct the back cover towards the locking

catches on both sides of the phone and press

to lock the cover into place (11).

■ Charging the battery

1. Connect the lead from the charger to the

socket on the bottom of your phone.

2. Connect the charger to an AC wall socket.

The text Charging is displayed briefly if

the phone is switched on. If the battery is

completely flat, it may take a few

minutes before the charging indicator

appears on the display or before any calls

can be made.

You can use the phone while the charger is connected.

The charging time depends on the charger and the battery used. For example,

charging a BLD-3 battery with the ACP-12 charger takes up to one hour and 30

minutes while the phone is in standby mode.

■ Switching the phone on and off

Press and hold the power key

Note that if the phone displays Insert SIM card even though

the SIM card is properly inserted, or SIM card not supported,

contact your network operator or service provider. Your phone

does not support 5-Volt SIM cards and the card may need to

be changed.

• If the phone asks for a PIN code, key in the PIN code

(displayed as ****), and press OK.

See also PIN code request in Security settings on page 90 and Access codes on

page 14.

• If the phone asks for a security code, key in the security code (displayed as

*****), and press OK.

See also Access codes on page 14.

Your device has an internal antenna.

Note: As with any other radio transmitting

device, do not touch the antenna

unnecessarily when the device is switched on.

Contact with the antenna affects call quality and may

cause the device to operate at a higher power level than

otherwise needed. Avoiding contact with the antenna

area when operating the device optimises the antenna

performance and the battery life.

■ Keypad lock (Keyguard)

You can lock the keypad to prevent the keys being

accidentally pressed, for example, when your phone is in your handbag.

• Locking the keypad

In standby mode, press Menu and then

within 1.5 seconds.

• Unlocking the keypad

Press Unlock and then

within 1.5 seconds.

To answer a call when the keyguard is on, press

. During a call, the phone can be operated

normally. When you end or reject the call, the keypad

will automatically be locked.

For automatic keypad locking, see Automatic

keyguard on page 84.

For locking the keypad during a call, see Options during a call on page 37.

When the keyguard is on, calls still may be possible to the official emergency number

programmed into your device. Key in the emergency number and press

■ Changing the covers

Note: Before removing the cover, always switch off the power and disconnect the

charger and any other device. Avoid touching electronic components while

changing the covers. Always store and use the device with the covers attached.

1. Remove the back cover from the phone. See step 1 in Installing the SIM card

and the battery on page 26.

2. To remove the front cover, gently pull the locking catch on

the top of the front cover from the locking hole in the

phone (1) and remove the cover starting from the top.

3. Place the key mat on the new front cover (2).

4. To replace the front cover, first place the

catches on the lower part of the cover into the

corresponding holes on the phone (3) and then

gently push the catch on the top of the cover

through the locking hole on the top of the

phone (4). Press the cover into place.

5. Replace the back cover of the phone. See step 7

in Installing the SIM card and the battery on

page 26.

3. Call functions

■ Making a call

1. Key in the phone number, including the area code. If you key in an incorrect

character, press Clear to delete it.

For international calls, press

twice for the international prefix (the +

character replaces the international access code) and then key in the country

code, the area code without the leading 0, if necessary, and the phone

number.

2. Press

3. Press

to call the number.

to end the call or to cancel the call attempt.

See also Options during a call on page 37.

Making a call using contacts

• To search for a name/phone number that you have saved in Contacts, see

Searching for a name in contacts on page 73. Press

to call the number.

Last number redialling

• In standby mode, press

once to access the list of the most recent 20

numbers that you called or attempted to call. Scroll to the number or name

that you want, and press

to call the number.

, or press

Calling your voice mailbox

• In standby mode, press and hold

and

If the phone asks for the voice mailbox number, key it in and press OK. See also

Voice messages on page 63.

Speed dialling a phone number

Before you can use speed dialling, assign a phone number to one of the speed-

dialling keys, from

either of the following ways:

• Press the speed-dialling key that you want and then press

, see Speed dials on page 77. Call the number in

• If Speed dialling is set to on, press and hold a speed-dialling key until the call is

started. See Speed dialling on page 83.

■ Answering or rejecting an incoming call

Press

to answer an incoming call and press

to end the call.

Press

to reject an incoming call.

If you press Silence, only the ringing tone is muted. Then either answer or reject

the call.

If a compatible headset supplied with the headset key is connected to the phone,

you can answer and end a call by pressing the headset key.

Tip: If the Divert if busy function is activated to divert the calls, for

example to your voice mailbox, rejecting an incoming call will also divert

the call. See Call divert on page 82.

Note that when somebody is calling you, the phone shows the caller’s name,

phone number or the text Private number or Call. If more than one name is found

in Contacts with the same seven last digits of the phone number as the caller’s

number, only the phone number will be displayed, if this is available. The phone

may display an incorrect name, if the caller’s number is not saved in Contacts but

there is another name saved with the same seven last digits in the phone number

as in the phone number of the caller.

Call waiting

During a call, press

call is put on hold. Press

to answer the waiting call (network service). The first

to end the active call.

To activate the Call waiting function, see Call waiting on page 83.

■ Options during a call

Many of the options that you can use during a call are network services. For

availability, contact your network operator or service provider.

Press Options during a call for some of the following options:

•

Mute or Unmute, End call, End all calls, Contacts, Menu and Hold or Unhold,

New call, Private, Answer and Reject.

•

Conference to make a conference call that allows up to six persons to take part

in a conference call. During a call, make a call to a new participant (New call).

The first call is put on hold. When the new call has been answered, select

Conference to include the first participant in the conference call. To have a

private conversation with one of the participants, select Private and select the

desired participant. To rejoin the conference call after a private conversation,

select Conference.

•

Lock keypad to activate the keypad lock.

Send DTMF to send DTMF (Dual Tone Multi-Frequency) tone strings, for

example passwords or bank account numbers. The DTMF system is used by all

touch-tone telephones. Key in the DTMF string or search for it in Contacts and

press OK. Note that you can key in the wait character w and the pause

character p by repeatedly pressing

•

Swap to switch between the active call and the call on hold, Transfer to

connect a call on hold to an active call, and disconnect yourself from the calls.

Loudspeaker to use your phone as a loudspeaker during a call. Do not hold the

phone to your ear during loudspeaker operation. To activate/deactivate the

loudspeaker, select Loudspeaker/Handset or press Loudsp./Handset,

respectively. The loudspeaker is automatically deactivated when you end the

call or call attempt, or connect the handsfree unit or headset to the phone.

If you have connected a compatible handsfree unit or the headset to the

phone, Handset in the options list is replaced with Handsfree or Headset and

the selection key Handset with Handsfr. or Headset, respectively.

Warning: Do not hold the device near your ear when the loudspeaker

is in use, because the volume may be extremely loud.

Using the loudspeaker with the radio, see Using the radio on page 93.

4. Writing text

You can key in text, for example, when writing messages, using traditional or

predictive text input.

When you are writing text, the predictive text input is indicated by

and the

traditional text input by

indicated by , or

the character case by pressing

at the top left of the display. The character case is

next to the text input indicator. You can change

. The number mode is indicated by

, and

you can change between the letter and number mode by pressing and holding

■ Setting predictive text input on or off

When writing text, press Options and select Dictionary.

• To set the predictive text input on, select a language in the dictionary options

list. Predictive text input is only available for the languages on the list.

• To revert to traditional text input, select Dictionary off.

Tip: To quickly set the predictive text input on or off when writing text,

press

twice, or press and hold Options.

■ Using predictive text input

You can key in any letter with a single keypress. The predictive text input is based

on a built-in dictionary to which you can also add new words.

1. Start writing a word using the keys

. Press each key only once

for one letter. The word changes after each keystroke.

Example: To write Nokia when the English dictionary is selected, press

and

To insert a number while in letter mode, press and hold the desired number key.

For more instructions for writing text, see Tips for writing text on page 41.

2. When you have finished writing the word and it is correct, confirm it by adding

a space with

or by pressing any of the scroll keys. Pressing a scroll key

also moves the cursor.

If the word is not correct,

press

repeatedly or press Options and select Matches. When the word

that you want appears, confirm it.

If the ? character is displayed after the word, the word you intended to write is

not in the dictionary. To add the word to the dictionary, press Spell, key in the

word (traditional text input is used) and press Save. When the dictionary

becomes full, the new word replaces the oldest one that was added.

3. Start writing the next word.

Writing compound words

Key in the first part of the word and confirm it by pressing . Write the last part

of the word and confirm the word.

■ Using traditional text input

Press a number key,

, repeatedly until the desired character

appears. Not all characters available under a number key are printed on the key.

The characters available depend on the language selected in the Language menu,

see Language on page 84.

To insert a number while in letter mode, press and hold the desired number key.

• If the next letter you want is located on the same key as the present one, wait

until the cursor appears, or press any of the scroll keys and then key in the

letter.

•

The most common punctuation marks and special characters are available

under the number key

More instructions for writing text, see Tips for writing text on page 41.

■ Tips for writing text

The following functions may also be available for writing text:

• To insert a space, press

• To move the cursor to the left, right, down or up, press the scroll keys

or , respectively.

• To delete a character to the left of the cursor, press Clear. Press and hold Clear

to delete the characters more quickly.

To delete all the characters at once when writing a message, press Optionsand

select Clear text.

• To insert a word when using the predictive text input, press Options and select

Insert word. Write the word using the traditional text input and press Save. The

word is also added to the dictionary.

• To insert a special character when using the traditional text input, press

or when using the predictive text input, press and hold

, or press Options

and select Insert symbol.

Press any of the scroll keys to scroll to a character and press Use to select the

character.

You can also scroll to a character by pressing

and select the character by pressing

The following options are available when writing text messages:

• To insert a phone number while in letter mode, press Options and select Insert

number. Key in the phone number or search for it in Contacts and press OK.

• To insert a name from Contacts, press Options and select Insert contact. To

insert a phone number or a text item attached to the name, press Options and

select View details.

5. Using the menu

The phone offers you an extensive range of functions, which are grouped into

menus. Most of the menu functions are provided with a brief help text. To view

the help text, scroll to the menu function you want and wait for 15 seconds. To

exit the help text, press Back. See Help text activation on page 86.

■ Accessing a menu function

By scrolling

1. To access the menu, press Menu.

2. Scroll with

through the menu (or with any of the scroll keys if

the grid menu view is selected), and select, for example, Settings by pressing

Select. To change the menu view, see Menu view on page 87.

3. If the menu contains submenus, select the one that you want, for example Call

settings.

4. If the selected submenu contains further submenus, repeat step 3. Select the

next submenu, for example Anykey answer.

5. Select the setting of your choice.

6. Press Back to return to the previous menu level, and Exit to exit the menu.

By using a shortcut

The menus, submenus and setting options are numbered and you can access some

of them by using their shortcut number.

To access the menu, press Menu. Key in quickly, within two seconds, the index

number of the menu function you want to access. Note that to access the menu

functions in menu 1, press Menu and key in

and

and then key in the

rest of the desired shortcut number.

Press Back to return to the previous menu level, and Exit to exit the menu.

■ List of menu functions

1. Messages

1. Text messages

2. Multimedia msgs.

3. Chat

4. Voice messages

5. Info messages

6. Message settings

7. Service commands

2. Call register

1. Missed calls

2. Received calls

3. Dialled numbers

4. Delete recent call lists

5. Call duration

6. Call costs

7. GPRS data counter

8. GPRS connection timer

3. Contacts

1. Search

2. Add contact

3. Delete

4. Copy

5. Settings

6. Speed dials

7. Info numbers

8. Service numbers ¹

9. My numbers

10.Caller groups²

4. Profiles

1. General

2. Silent

3. Meeting

4. Outdoor

5. Pager

5. Settings

1. Personal shortcuts

2. Time and date settings

3. Call settings

4. Phone settings

5. Display settings

6. Tone settings

7. Enhancement settings

1. Shown if supported by your SIM card. For availability, contact your network operator or ser-

vice provider.

2. If Info numbers, Service numbers or both are not supported, the number of this menu item

changes accordingly.

8. Security settings

9. Restore factory settings

6. Radio

7. Camera

1. Standard photo

2. Portrait photo

3. Night mode

4. Self-timer

5. Settings

8. Gallery

1. View folders

2. Add folder

3. Delete folder

4. Rename folder

5. Gallery downloads

9. Organiser

1. Alarm clock

2. Calendar

3. To-do list

3. This menu is shown only if the phone is or has been connected to a compatible enhance-

ment available for the phone.

10.Games

1. Select game

2. Game downloads

3. Memory

4. Settings

11.Applications

1. Select application

2. App. downloads

3. Memory

12.Extras

1. Calculator

2. Countdown timer

3. Stopwatch

4. Wallet

5. Synchronisation

13.Connectivity

1. Infrared

2. GPRS

14.Services

1. Home

2. Bookmarks

3. Download links

4. Service inbox

5. Settings

6. Go to address

7. Clear the cache

15.Go to

16.SIM services

1. Only shown if supported by your SIM card. The name and contents may vary depending on

the SIM card

6. Menu functions

■ Messages (Menu 1)

You can read, write, send and save text, multimedia and e-mail

messages. All messages are organised into folders.

Before you can send any text, picture, or e-mail message, you need to save your

message centre number, see Message settings on page 64.

Important: E-mail messages or multimedia message objects may contain viruses

or otherwise be harmful to your device or PC. Do not open any attachment if you

are not sure of the trustworthiness of the sender.

Note:When sending messages, your device may display the words "Message Sent".

This is an indication that the message has been sent by your device to the message

centre number programmed into your device. This is not an indication that the

message has been received at the intended destination. For more details about messaging

services, check with your service provider.

Text messages (SMS)

Using SMS (Short Message Service), your phone can send and receive multi-part

messages, which consist of several ordinary text messages (network service).

Sending multipart messages may affect invoicing. Consult your service provider

for more details.

You can also send and receive text messages that contain pictures.

Your device supports the sending of text messages beyond the normal 160-character limit. If

your message exceeds 160 characters, it will be sent as a series of two or more messages.

The number of available characters / the current part number of a multi-part message are

shown on the top right of the display, for example 120/2.

Note that using special (Unicode) characters such as ë, â, á, ì take up more space.

Note: Picture message function can be used only if it is supported by your network

operator or service provider. Only devices that offer picture message features can

receive and display picture messages.

Writing and sending messages

1. Press Menu, and select Messages, Text messages and Create message.

Tip: To start writing messages quickly, press

in standby mode.

2.Key in a message. See Writing text on page 39. To insert text

templates or a picture into the message, see Templates on page 56. Each

picture message is made up of several text messages. Therefore, sending one

picture message may cost more than sending one text message.

3. To send the message, press Options and select Send.

4. Enter the recipient’s phone number or search for the phone number in

Contacts.

Press OK to send the message.

Options for sending a message

After you have written a message, press Options and select Sending options.

• To send a message to several recipients, select Send to many. When you have

sent the message to everyone you want to send it to, press Done.

• To send a message using a distribution list, select Send to list.

To create a distribution list, see Distribution lists on page 54.

• To send a message using a message profile, select Sending profile and then the

desired message profile.

To define a message profile, see Message settings on page 64.

Writing and sending e-mail

Before you can send an e-mail via SMS, you need to save the settings for sending

e-mail, see Message settings on page 64. To check e-mail service availability and

to subscribe to the service, contact your network operator or service provider. To

save an e-mail address in Contacts, see Saving multiple numbers and text items

per name on page 72.

1. Press Menu, and select Messages, Text messages and Create SMS e-mail.

2. Key in the recipient’s e-mail address or search for it in Contacts and press OK.

3. If you wish, you can key in a subject for the e-mail and press OK.

4. Key in the e-mail message. See Writing text on page 39. The total number of

characters that you can key in is shown on the top right of the display. The e-

mail address and subject are included in the total number of characters.

See also Inserting a text template into a message or into an e-mail on page 56.

Pictures cannot be inserted.

5. To send the e-mail, press Options and select Send e-mail. If you have not saved

the settings for sending e-mails, the phone asks for the number of the e-mail

server.

Press OK to send the e-mail.

Reading and replying to an SMS message or an e-mail

When you have received a message or an e-mail, the indicator

and the

number of new messages followed by messages received are shown.

The blinking indicates that the message memory is full. Before you can receive

new messages, delete some of your old messages in the Inbox folder.

The text messages function uses shared memory, see Shared Memory on page 12.

1. Press Show to view the new message, or press Exit to view it later.

Reading the message later:

Press Menu, and select Messages, Text messages and Inbox.

2. If more than one message has been received, select the one that you want to

read. An unread message is indicated by

in front of it.

3. While reading or viewing the message, press Options.

You can select an option, for example, to delete, forward or edit the message

as a text message or an e-mail, rename the message you are reading or to

move it to another folder.

Select Copy to calendar to copy text at the beginning of the message to your

phone’s calendar as a reminder note for the current day.

Select Message details to view, if available, the sender’s name and phone

number, the message centre used, and the date and time of receipt.

Select Use detail to extract numbers, e-mail addresses and website addresses

from the current message.

When reading a picture message, select Save picture to save the picture in the

Templates folder.

4. Select Reply to reply to a message. Select Original text to include the original

message in the reply, or select a standard answer to be included in the reply, or

select Empty screen.

When replying to an e-mail, confirm or edit the e-mail address and subject

first. Then write your reply message.

5. Press Options, select Send, and press OK to send the message to the displayed

number.

Inbox and sent items folders

The phone saves incoming text messages in the Inbox folder and sent messages in

the Sent items folder of the Text messages submenu.

Text messages that you wish to send later can be saved in the Archive, My folders

or Templates folder.

Distribution lists

If you need to send messages frequently to a fixed group of recipients, you can

define a distribution list for that purpose. You can save these distribution lists in

the phone’s memory. Note that the phone sends the message separately to each

recipient on the list. Therefore, sending a message using a distribution list may

cost more than to send a message to one recipient.

Make sure that the contacts you want to add to the distribution lists, are saved in

the phone’s internal contact memory.

Press Menu, and select Messages, Text messages and Distribution lists. The names

of the available distribution lists are shown.

• If you have not saved any lists, press Add to create one.

• Key in the name for the list and press OK. Press Options, and select View list

. Press Add and select a contact from the phone’s contact memory. To add

more contacts to the created list, press Options, select Add contact and

select a new contact.

• Otherwise, scroll to a list, press Options and you can select

•

View list to view the contacts on the selected list. Press Options and you

can also delete or view details of a selected contact or add a new contact.

•

Add list to create a distribution list.

Rename list to change the name of the selected list.

Clear list to delete all names and phone numbers from the selected list.

Delete list to delete the selected distribution list.

If the message cannot be sent to certain recipients on the distribution list,

select Undelivered. Press Options and select

•

Resend to list to resend the message to the recipients on the Undelivered

list.

•

View list to view the list of the recipients to whom the latest message

sending failed.

•

Delete list to delete the Undelivered list.

View message to view the failed message.

Templates

Your phone includes text templates, indicated by , and picture templates,

indicated by

To access the template list, press Menu, and select Messages, Text messages and

Templates.

Inserting a text template into a message or into an e-mail

• When you are writing or replying to a message or an e-mail, press Options.

Select Use template and select the template that you want to insert.

Inserting a picture into a text message

• When you are writing or replying to a message, press Options. Select Insert

picture and select a picture to view it. Press Insert to insert the picture into

your message. The

indicator in the header of the message indicates that a

picture has been attached. The number of characters that you can enter in a

message, depends on the size of the picture.

To view the text and the picture together before sending the message, press

Options and select Preview.

Archive folder and My folders

To organise your messages, you can move some of them to the Archive folder, or

add new folders for your messages.

While reading a message, press Options. Select Move, scroll to the folder that you

want to move the message to and press Select.

To add or delete a folder, press Menu, and select Messages, Text messages and My

folders.

• To add a folder, press Options and select Add folder.

• To delete a folder, scroll to the folder that you want to delete, press Options

and select Delete folder.

Multimedia messages

Note: Only devices that offer compatible multimedia message or e-mail features

can receive and display multimedia messages.

A multimedia message can contain text, sound and a picture. The phone supports

multimedia messages that are up to 45 kB in size. If the maximum size is

exceeded, the phone may not be able to receive the message. Depending on the

network, you may receive a text message that includes an Internet address where

you can view the multimedia message.

If the message contains a picture, the phone scales it down to fit the display area.

The default setting of the multimedia message service is generally on.

The appearance of a multimedia message may vary depending on the receiving device.

Multimedia messaging supports the following formats:

• Picture: JPEG, GIF, PNG, and BMP.

• Sound: Scalable Polyphonic MIDI (SP-MIDI) and monophonic ringing tones.

The phone does not necessarily support all variations of the aforementioned file

formats. If a received message contains any unsupported elements, they may be

replaced with the file name and the text Object format not supported.

Note that you are not able to receive any multimedia messages if you have a call

in progress, a game or another Java application running, or an active browsing

session over GSM data (see Keying in the service settings manually on page 122).

Because delivery of multimedia messages can fail for a variety of reasons, do not

rely solely upon them for essential communications.

Writing and sending a multimedia message

To set the settings for multimedia messaging, see Settings for multimedia

messages on page 66. To check availability and to subscribe to the multimedia

messaging service, contact your network operator or service provider.

1. Press Menu, and select Messages, Multimedia msgs. and Create message.

2. Key in a message. See Writing text on page 39.

To insert a picture or a sound clip, press Options, and select Insert image or

Insert sound clip, respectively. The list of available folders in the Gallery is

shown. Open a specific folder, scroll to the desired picture or sound, press

Options and select Insert. The

indicator in the header of the

message indicates that a picture or sound has been attached.

To insert a name from Contacts, press Options, select More options and Insert

contact. Scroll to the desired name, press Options and select Insert contact.

To insert a number, press Options, select More options and Insert number . Key

in the number or search for it in Contacts, and press OK.

3. To view the message before sending it, press Options and select Preview.

4. To send the message, press Options and select Send to number (or Send to e-

mail or Send to many).

5. Enter the recipient’s phone number (or e-mail address) or search for it in

Contacts. Press OK and the message is moved to the Outbox folder for sending.

It takes more time to send a multimedia message than to send a text message.

While the multimedia message is being sent, the animated indicator

displayed and you can use other functions on the phone. If there is an

interruption while the message is being sent, the phone tries to resend it a few

times. If this fails, the message will remain in the Outbox folder and you can try

to resend it later.

The messages that you have sent will be saved in the Sent items folder if the

setting Save sent messages is set to Yes. See Settings for multimedia messages

on page 66. This is not an indication that the message has been received at the

intended destination.

being copied, modified, transferred or forwarded.

Reading and replying to a multimedia message

When your phone is receiving a multimedia message, the animated indicator

is displayed. When the message has been received, the indicator

and the text

Multimedia message received are shown.

The blinking

indicates that the memory for multimedia messages is full, see

Multimedia messages memory full on page 61.

The multimedia message function uses shared memory, see Shared Memory on

page 12.

1. Press Show to view the message, or press Exit to view it later.

Reading the message later: Press Menu, and select Messages, Multimedia

msgs. and Inbox.

2. Scroll to view the message. Press Options and some of the following options

may be available:

•

Delete message to delete a saved message.

Reply or Reply to all to reply to the message. To send the reply, refer to

Writing and sending a multimedia message on page 58

•

Forward to no., Forward to e-mail or Send to many to forward the message.

Edit to edit a message. You can only edit messages you have created. See

Writing and sending a multimedia message on page 58.

•

Message details to view the subject, size and the type of message.

Details to view the details of the attached image or sound.

Save sound clip to save the ringing tone in the Gallery.

Save image to save the picture in the Gallery.

Refer also to the file options in Gallery, see Gallery (Menu 8) on page 96.

Inbox, Outbox, Saved and Sent items folders

The phone saves the multimedia messages that have been received in the Inbox

folder of the Multimedia msgs. submenu.

Multimedia messages that have not yet been sent are moved to the Outbox folder

of the Multimedia msgs. submenu.

The multimedia messages that you wish to send later, can be saved in the Saved

items folder of the Multimedia msgs. submenu.

The multimedia messages that have been sent are saved in the Sent items folder of

the Multimedia msgs. submenu if the setting Save sent messages is set to Yes. See

Settings for multimedia messages on page 66.

Multimedia messages memory full

When you have a new multimedia message waiting and the memory for the

messages is full, the indicator

blinks and Multimedia memory full, view

waiting msg. is shown. To view the waiting message, press Show. To save the

message, press Options, select Save message and delete old messages by first

selecting the folder and then the oId message to be deleted.

To discard the waiting message, press Exit and Yes. If you press No, you can view

the message.

Deleting messages

1. To delete text messages, press Menu, and select Messages, Text messages and

Delete messages.

To delete all messages from all folders, select All messages and when Delete all

messages from all folders? is displayed, press OK. If the folders contain unread

messages, the phone will ask whether you want to delete them also.

To delete multimedia messages, press Menu, and select Messages, Multimedia

msgs. and Delete messages.

2. To delete all messages from a folder, select the folder from which you want to

delete the messages and press OK. If the folder contains unread messages, the

phone will ask whether you want to delete them also.

Chat

You can have a conversation with another person using this faster text messaging

application (network service). You cannot save received or sent messages, but you

can view them while chatting. Each chat message is sent and priced as a separate

text message.

1. To start a chat session, press Menu, select Messages and Chat. Key in or search

the Contacts for the phone number of the person with whom you want to start

a chat session and press OK.

Another way to start a chat session: When you have received a message,

press Show to read it. To start a chat session, press Options and select Chat.

2. Key in your nickname for the chat session and press OK.

3. Write your chat message, see Writing text on page 39.

4. To send the message, press Options and select Send.

5. The reply message from the other person is shown above your original

message.

To reply to the message, press OK and repeat steps 3 and 4.

6. To end the chat session, press OK and press Options and select Quit.

To view the most recent messages of the current chat session, press Options and

select Chat history. The messages that you sent are indicated by "<" and your

nickname and the messages that you received are indicated by ">", and the

sender’s nickname. Press Back to return to the message you are currently writing.

To edit your nickname, select the option Chat name.

Voice messages

The voice mailbox is a network service and you may need to subscribe to it. For

more information and for the voice mailbox number, contact your service

provider.

Press Menu, and select Messages and Voice messages. Select

•

Listen to voice messages to call your voice mailbox at the phone number that

you have saved in the Voice mailbox number menu.

If you have two phone lines available (network service), each phone line may

have its own voice mailbox number. Refer to Line for outgoing calls on page

83.

•

Voice mailbox number to key in, search for or edit your voice mailbox number

and press OK to save it.

If supported by the network, the indicator

will show new voice messages.

Press Listen to call your voice mailbox number.

Info messages

With the info message network service you can receive messages on various

topics from your service provider. These messages may include, for example,

weather or traffic conditions. For availability, topics and the relevant topic

numbers, contact your service provider.

Message settings

The message settings affect the sending, receiving and viewing of messages.

Settings for text and e-mail messages

1. Press Menu, and select Messages, Message settings, Text messages and

Sending profile.

2. If more than one message profile set is supported by your SIM card, select the

set you want to change.

• Select Message centre number to save the phone number of the message

centre that is required for sending text messages. You will receive this

number from your service provider.

• Select Messages sent via to select the message type Text, E-mail, Paging or

Fax.

• Select Message validity to select the length of time for which the network

should attempt to deliver your message.

• For message type Text, select Default recipient number to save a default

number for sending messages for this profile.

For message type E-mail, select E-mail server to save the e-mail server

number.

• Select Delivery reports to ask the network to send delivery reports about

your messages (network service).

• Select Use GPRS and select Yes to set GPRS as the preferred SMS bearer.

Also, set the GPRS connection to Always online, see GPRS connection on

page 119.

• Select Reply via same centre to allow the recipient of your message to send

you a reply via your message centre (network service).

• Select Rename sending profile to change the name of the selected message

profile. The message profile sets are only displayed if your SIM card

supports more than one set.

Overwrite settings

When the text message memory is full, the phone cannot receive or send any new

messages. However, you can set the phone to automatically replace old text

messages in the Inbox and Sent items folders with the new ones.

Press Menu, and select Messages, Message settings, Text messages and

Overwriting in inbox or Overwriting in sent items. Select Allowed to set the phone

to replace the old text messages with new ones in the Inbox or the Sent items

folder, respectively.

Settings for multimedia messages

Press Menu, and select Messages, Message settings and Multimedia msgs.. Select

•

Save sent messages. Select Yes to set the phone to save sent multimedia

messages in the Sent items folder. If you select No, the sent messages are not

saved.

•

Delivery reports to ask the network to send delivery reports about your

messages (network service)

Scale image down to define the image size for the multimedia messages you

are writing.

Allow multimedia reception. Choose No, Yes or In home network to use the

multimedia service. If you choose In home network, you cannot receive

multimedia messages when outside your home network. The default setting is

In home network.

•

Incoming multimedia messages. Select Retrieve to set the phone to

automatically fetch newly received multimedia messages, or select Reject if

you do not wish to receive multimedia messages. This setting is not shown if

the Allow multimedia reception is set to No.

Connection settings. Define connection settings for retrieving multimedia

messages. Activate the set in which you want to save the connection settings

and then edit the active settings.

Select each of the settings one by one and key in all the required settings.

Contact your network operator or service provider for the the settings.

•

Settings' name. Key in the new name for the connection set and press OK.

•

Homepage. Key in the homepage address of the service provider that you

want to use, press for a dot, and press OK.

•

Session mode. Select Permanent or Temporary.

Data bearer. Select GPRS.

Bearer settings to set the settings for the selected bearer.

•

GPRS access point. Key in the access point name to establish a

connection to a GPRS network and press OK.

•

IP address. Key in the address, press

for a dot, and press OK.

Authentication type. Select Secure or Normal.

User name. Key in the user name and press OK.

Password. Key in the password and press OK.

•

Allow adverts. You can receive or reject advertisements. This setting is not

shown if the Allow multimedia reception is set to No.

To receive the multimedia connection settings as an OTA message

You may receive the multimedia connection settings as an OTA message from the

network operator or service provider. For more information, contact your network

operator or service provider.

Font size setting

To select the font size for reading and writing messages, press Menu, and select

Messages, Message settings, Other settings and Font size.

Service commands

Press Menu, and select Messages and Service commands. Key in and send service

requests (also known as USSD commands), such as activation commands for

network services, to your service provider.

■ Call register (Menu 2)

The phone registers the phone numbers of missed, received and

dialled calls, and the approximate length and cost of your calls.

The phone registers missed and received calls only if the network supports these

functions, the phone is switched on and within the network’s service area.

When you press Options in the Missed calls, Received calls and Dialled numbers

menu, you can, for example, view the date and the time of the call, edit or delete

the phone number from the list, save the number in Contacts or send a message to

the number.

Recent calls lists

Press Menu, and select Call register and then select

•

Missed calls to view the list of the last ten phone numbers from which

somebody has tried to call you (network service). The number in front of the

(name or) phone number indicates the amount of call attempts from that

caller.

Tip: When a note about missed calls is displayed, press List to access

the list of phone numbers. Scroll to the number you would like to call

back and press

•

Received calls to view the list of the last ten phone numbers from which you

have most recently accepted calls (network service).

Dialled numbers to view the list of the 20 phone numbers that you have most

recently called or attempted to call. See also Last number redialling on page

35.

•

Delete recent call lists to delete the recent calls lists. Select whether you want

to delete all the phone numbers in the recent calls lists, or only those numbers

in the missed calls, received calls or dialled numbers lists. You cannot undo the

operation.

Call counters and call timers

Note: The actual invoice for calls and services from your service provider may vary,

depending on network features, rounding off for billing, taxes and so forth.

Press Menu, and select Call register and then select

•

Call duration, scroll to view the approximate duration of your incoming and

outgoing calls in hours, minutes and seconds. The security code is required to

clear the timers.

If you have two phone lines available (network service), each phone line has its

own call duration timers. The timers of the currently selected line are

displayed. Refer to Line for outgoing calls on page 83.

•

Call costs (network service). Select Last call units or All calls' units to check the

cost of your most recent call or all calls in terms of units specified within the

Show costs in function.

Select Call cost settings and select Clear counters to clear the counters, or

select Show costs in to set the phone to show the remaining talk time in terms

of charging units, Units, or units of currency, Currency. Contact your service

provider for charging unit prices.

Select Call cost limit to limit the cost of your calls to a certain amount of

charging units or units of currency. The PIN2 code is required for the call cost

settings.

Note: When no more charging units or currency units are left, calls may only be

possible to the official emergency number programmed into the device.

•

GPRS data counter. Scroll to check the amounts of data that were sent or

received in the last session, data sent and received in total, and to clear the

counters. The counter unit is a byte. The security code is required to clear the

counters.

GPRS connection timer. Scroll to check the duration of the last GPRS

connection or the total GPRS connection time. You can also clear the timers.

The security code is required to clear the timers.

■ Contacts (Menu 3)

You can save names and phone numbers (contacts) in the

phone’s memory and in the SIM card’s memory.

• The phone’s memory may save up to 500 names with numbers and text notes

about each name. You can also save an image for a certain number of names.

The number of names that can be saved depends on the length of the names,

and the number and length of the phone numbers and text items.

Contacts use shared memory, see Shared Memory on page 12.

• The phone supports SIM cards that can save up to 250 names and phone

numbers. Names and numbers saved in the SIM card’s memory, are indicated

Selecting settings for contacts

Press Menu and select Contacts and Settings. Select

•

Memory in use to select the memory you want to use for your contacts. To

recall names and numbers from both memories for contacts, select Phone and

SIM. In that case, the names and numbers will be saved in the phone’s memory.

•

Contacts view to select how the names, numbers and images in contacts are

displayed.

Memory status to see how many names and phone numbers are currently

saved and how many can still be saved in the selected memory for contacts.

Saving names and phone numbers (Add name)

Names and numbers will be saved in the used memory, see Selecting settings for

contacts above.

1. Press Menu and select Contacts and Add contact.

2. Key in the name and press OK. See Using traditional text input on page 41.

3. Key in the phone number, and press OK. To key in the numbers, see Making a

call on page 35.

4. When the name and number are saved, press Done.

Tip: Quick save In standby mode, key in the phone number. Press Options,

and select Save. Key in the name, press OK and Done.

Saving multiple numbers and text items per name

You can save different types of phone numbers and short text items per name in

the phone’s internal memory for contacts.

The first number saved is automatically set as the default number and it is

indicated with a frame around the number type indicator, for example

. When

you select a name from contacts, for example to make a call, the default number is

used unless you select another number.

1. Make sure that the memory in use is either Phone or Phone and SIM. See

Selecting settings for contacts on page 71.

2. To access the list of names and phone numbers, press

in standby mode.

3. Scroll to the name saved in the phone’s internal memory for the contact to

which you want to add a new number or text item, and press Details.

4. Press Options and select Add number or Add detail.

5. Select one of the following number types

Office and Fax,

General,

Mobile,

Home,

or text types

E-mail address,

Web address,

Postal address and

Note.

To change the number or text type, select Change type in the options list.

6. Key in the number or text item and press OK to save it.

7. Press Back and then Exit to return to standby mode.

Changing the default number

Press

in standby mode, scroll to the name you want and press Details. Scroll

to the number you want to set as the default number. Press Options and select Set

as default.

Adding an image to a name or number in contacts

You can add an image in supported format to a name or number saved in the

phone’s internal memory.

Press

in standby mode, scroll to the name (and number) you want to add an

image to and press Details. Press Options and select Add image. The phone opens

the list of folders in the Gallery. Scroll to the desired image, press Options and

select Save to contacts. A copy of the image is added to the contact.

Searching for a name in contacts

1. Press Menu and select Contacts and Search.

2. You can key in the first characters of the name you are searching for in the

pop-up window.

Press

and

to scroll through the names in the list, and

and

to move the cursor in the pop-up window.

3. Scroll to the name you want, and press Details. Scroll to view the details of the

selected name.

Tip: To quickly find a name and phone number, press

in standby

mode. Key in the first letter(s) of the name, and/or scroll to the name you

want.

Tip: To quickly view a specific name with the default phone number, press

and hold

at the name while scrolling through the names.

Editing a name, number or text item or changing an image

Search for the name (and number) you want to edit and press Details. Scroll to the

name, number, text item or image, and press Options. Select Edit name, Edit

number, Edit detail or Change image and edit the name, number or text or change

the image and press OK.

Deleting names, numbers and images

Press Menu and select Contacts and Delete. Deleting a name and number will also

delete an image attached to it.

• To delete names and numbers one by one, select One by one and scroll to the

name (and number) you want to delete. Press Delete and press OK to confirm.

• To delete names and numbers in contacts all at once, select Delete all and then

scroll to either of the memories Phone or SIM card and press Delete. Press OK

and confirm with the security code.

Deleting numbers, text items or images

Press

in standby mode, scroll to the desired name (and number) and press

Details. Scroll to the number or text item you want to delete, press Options and

select Delete number or Delete detail, respectively. If you have an image attached

to the name or number and you want to delete it, press Options and select Delete

image. Deleting an image from contacts does not delete it from Gallery.

Copying contacts

You can copy names and phone numbers from the phone’s memory to your SIM

card’s memory and vice versa. Note that any text items saved in the phone’s

internal memory, such as e-mail addresses, will not be copied to the SIM card.

1. Press Menu and select Contacts and Copy.

2. Select the copying direction, From phone to SIM card or From SIM card to

phone.

3. Select One by one, All or Default numbers.

• If you select One by one, scroll to the name you want to copy and press

Copy.

Default numbers is shown if you copy from the phone to the SIM card. Only the

default numbers will be copied.

4. To choose whether you want to keep or delete the original names and numbers,

select Keep original or Move original.

• If you select All or Default numbers, press OK when Start copying? or Start

moving? is displayed.

Sending and receiving a business card

You can send and receive a person’s contact information from a compatible device

as a business card either via IR or as an Over The Air (OTA) message if supported by

the network.

Receiving a business card

To receive a business card via IR, make sure that your phone is ready to receive

data through its IR port, see Infrared on page 118. The user of the other phone can

now send the name and phone number via Infrared.

When you have received a business card via IR or as an OTA message, press Show.

Press Save to save the business card in the phone’s memory. To discard the

business card, press Exit and then OK.

Sending a business card

You can send a business card via IR or as an OTA message to a compatible phone

or other compatible device which supports the vCard standard. You can also send

an image attached to the business card via IR, if you have saved images in the

phone’s memory.

1. To send a business card, search for the name and phone number you want to

send from contacts, press Details and Options and select Send bus. card.

2. To send the business card via IR, make sure that the other phone or the PC is

set up to receive data via its IR port and select Via infrared.

To send the business card as an Over The Air (OTA) message, select Via text

message.

Speed dials

To assign a number to a speed-dialling key, press Menu and select Contacts and

Speed dials and scroll to the speed-dialling key number that you want.

Press Assign, press Search, and select first the name and then the number you

want to assign. If a number has already been assigned to the key, press Options,

and you can view, change or delete the assigned number. If the Speed dialling

function is off, the phone asks whether you want to activate it. Press Yes to

activate the function. Refer to Speed dialling on page 83.

To make a call using the speed-dialling keys, see Speed dialling a phone number

on page 36.

Info numbers and service numbers

Your service provider may have included information numbers or service numbers

in your SIM card.

Press Menu and select Contacts and Info numbers or Service numbers. Scroll

through a category to an information number, or to a service number, and press

to call the number.

My numbers

The phone numbers assigned to your SIM card are saved in My numbers if this is

allowed by the card. To view the numbers press Menu and select Contacts and My

numbers. Scroll to the desired name or number, and press View.

Caller groups

You can arrange the names and phone numbers saved in Contacts into caller

groups. For each caller group, you can set the phone to sound a specific ringing

tone and show a selected graphic on the display when you receive a call from a

phone number in the group, see below. To set the phone to ring only upon calls

from identified phone numbers belonging to a selected caller group, see Alert for

in Tone settings on page 88.

Press Menu and select Contacts and Caller groups and select the desired caller

group. Select

•

Group name, key in a new name for the caller group and press OK.

Group ringing tone and select the ringing tone for the group. Default is the

ringing tone selected for the currently active profile.

•

Group logo and select On to set the phone to display the group logo, Off not to

display it, or View to view the logo.

Group members to add a name to the caller group. If there are no names in the

group, press Add, or otherwise, press Options and select Add contact. Scroll to

the name you want to add to the group and press Add.

To remove a name from a caller group, scroll to the name you want to remove,

and press Options and select Remove contact.

■ Profiles (Menu 4)

Your phone has various setting groups, profiles, for which you can

customise the phone tones for different events and environments.

Initially, personalise the profiles to your own liking and then you only need to

activate a profile to use it. Available profiles are General, Silent, Meeting, Outdoor,

and Pager.

Press Menu, and select Profiles. Scroll to a profile and press Select.

• To activate the selected profile, select Activate.

• To set the profile to be active for a certain amount of time up to 24 hours,

select Timed and set the end time. When the time set for the profile expires,

the previous profile that was not timed, becomes active.

• To personalise the profile, select Personalise. Select the setting you want to

change and make the changes. The same settings can also be changed in the

Tone settings menu, see Tone settings on page 88.

To rename a profile, Profile name. The General profile cannot be renamed.

Tip: To change the profile quickly in standby mode, press the power key

, scroll to the profile you want to activate and press Select.

■ Settings (Menu 5)

Personal shortcuts

You can add some specific functions to your personal shortcut list and activate

them either by pressing Go to or accessing the Go to menu. Refer to Go to (Menu

15) on page 133 and Standby mode on page 21.

To select the name for the right selection key and the functions for your personal

shortcut list, press Menu, and select Settings and Personal shortcuts.

• To select the name for the right selection key displayed in standby mode, select

Right selection key. Select an operator specific name, Go to or Contacts.

• To select the desired functions for your personal shortcut list, select Select Go

to options and the list of available functions is shown.

Scroll to the desired function and press Mark to add it to the shortcut list.

To remove a function from the list, press Unmark.

• To rearrange the functions on the list, select Organise and the desired function.

Press Move and select where you want to move the function.

Time and date settings

Clock

Press Menu, and select Settings, Time and date settings and Clock.

Select Show clock (or Hide clock) to show (or hide) the time on the top right of the

display in standby mode. Select Set the time to adjust the clock to the correct

time, and Time format to select the 12-hour or 24-hour time format.

The clock serves the functions Messages, Call register, Alarm clock, timed Profiles,

Calendar and screen saver, for example.

If the battery is removed from the phone or if it is flat for a long time, you may

need to set the time again.

Date

Press Menu, and select Settings, Time and date settings and Date.

Select Show date (or Hide date) and the date is shown (or hidden) on the display

when the phone is in standby mode. Select Set the date to adjust the date. You can

also select the date format and date separator.

Auto update of date and time

Press Menu, and select Settings, Time and date settings and Auto-update of date

& time (network service). To set the phone to automatically update the time and

date according to the current time zone, select On. To set the phone to ask for a

confirmation before the update, select Confirm first.

The automatic update of the date and time does not change the time that you

have set for the alarm clock, calendar or the alarm notes. They are in local time.

Updating may cause some alarms that you have set to expire.

For information on availability, contact your network operator or service provider.

Call settings

Call divert

Press Menu, and select Settings, Call settings and Call divert (network service).

With call divert, you can direct your incoming calls to another number, for

example to your voice mailbox number. For details, contact your service provider.

Divert options not supported by your SIM card or your network operator may not

be shown.

Select the divert option you want, for example, select Divert if busy to divert voice

calls when your number is busy or when you reject an incoming call.

To set the divert setting to on, select Activate and then select the timeout after

which the call is diverted, if this is available for the divert option. To set the divert

setting to off, select Cancel, or select Check status, if this is available for the divert

option, to check whether call divert is activated or not. Several divert options may

be active at the same time.

To see the divert indicators in standby mode, see Standby mode on page 21.

Anykey answer

Press Menu, and select Settings, Call settings and then Anykey answer. Select On

and you can answer an incoming call by briefly pressing any key, except

selection keys

and

, and

Automatic redial

Press Menu, and select Settings, Call settings and Automatic redial. Select On and

your phone will make a maximum of ten attempts to connect the call after an

unsuccessful call attempt.

Speed dialling

Press Menu, and select Settings, Call settings and Speed dialling. Select On and

the names and phone numbers assigned to the speed-dialling keys, from

, can be dialled by pressing and holding the corresponding number key.

Call waiting

Press Menu, and select Settings, Call settings and Call waiting. Select Activate

and the network will notify you of an incoming call while you have a call in

progress (network service). See Call waiting on page 37.

Summary after call

Press Menu, and select Settings, Call settings and Summary after call. Select On

and the phone will briefly display the approximate duration and cost (network

service) of the call after each call.

Send my caller identity

Press Menu, and select Settings, Call settings and Send my caller identity. Select

Yes and your phone number will be displayed to the person you are calling

(network service). Select Set by network and the setting agreed upon with your

service provider is used.

Line for outgoing calls

Line for outgoing calls is a network service to select the phone line 1 or 2, that is,

the subscriber number, for making calls. For example, you can have a private and a

business line. For more information on availability, contact your network operator

or service provider.

Press Menu, and select Settings, Call settings and Line for outgoing calls. If you

select Line 2 and have not subscribed to this network service, you will not be able

to make calls. However, calls on both lines can be answered regardless of the

selected line.

If supported by your SIM card, you can prevent the line selection by selecting the

option Lock.

Tip: In standby mode, you can switch from one line to the other by

pressing and holding

Phone settings

Language

Press Menu, and select Settings, Phone settings and Language. Select the

language for the display texts. If Automatic is selected, the phone selects the

language according to the information on the SIM card.

Memory status

Press Menu, and select Settings, Phone settings and Memory status. Scroll to view

the free memory, the total used memory and the memory used for each function

in the list.

You may also find the memory information in the menu of some of those

functions, for example in Gallery.

Automatic keyguard

When the keyguard is on, calls still may be possible to the official emergency number

programmed into your device. Key in the emergency number and press

You can set the keypad of your phone to lock automatically after a pre-set time

delay when the phone is in standby mode and none of the phone’s functions have

been used.

Press Menu, and select Settings, Phone settings and Automatic keyguard. Select

On and set the time delay from 10 seconds to 60 minutes. To deactivate the

automatic keyguard, select Off.

Refer also to Keypad lock (Keyguard) on page 31.

Cell info display

Press Menu, and select Settings, Phone settings and Cell info display. Select On to

set the phone to indicate when it is used in a cellular network based on Micro

Cellular Network (MCN) technology.

Welcome note

Press Menu, and select Settings, Phone settings and Welcome note. Key in the

note you would like to be shown briefly when the phone is switched on. To save

the note, press Options, and select Save.

Network selection

Press Menu, and select Settings, Phone settings and Network selection. Select

Automatic and the phone automatically selects one of the cellular networks

available in your area.

If you select Manual, you can select a network that has a roaming agreement with

your home network operator. If No access is displayed, you must select another

network. The phone stays in manual mode until the automatic mode is selected or

another SIM card is inserted into the phone.

Confirm SIM service actions

See SIM services (Menu 16) on page 133.

Help text activation

To set the phone to show or not to show the help texts, press Menu, and select

Settings, Phone settings and Help text activation.

See also Using the menu on page 43.

Start-up tone

To set the phone to play or not to play a start-up tone when the phone is switched

on, press Menu, and select Settings, Phone settings and Start-up tone.

Display settings

Wallpaper

You can set your phone to display a background image, known as wallpaper, when

the phone is in standby mode. Some images are pre-saved in the Gallery menu.

You can also receive images, for example, via multimedia messages, or transfer

them with PC Suite from a compatible PC and then save them in Gallery. Your

phone supports JPEG, GIF, BMP and PNG formats but not necessarily all variations

of these file formats.

Press Menu, and select Settings, Display settings and Wallpaper.

• Select Change image and open an image folder. Scroll to the image you want

to set as wallpaper, press Options and select Set as wallpaper.

• To activate/deactivate the wallpaper, select On/Off, respectively.

Note that the wallpaper is not displayed when the phone activates the screen

saver.

Colour schemes

You can change the colour in some display components, for example, indicators

and signal and battery bars.

Press Menu, and select Settings, Display settings and Colour schemes. Select the

desired colour scheme.

Menu view

To select the way the phone displays the main menu, press Menu, and select

Settings, Display settings and Menu view. Select List for the menu list view and

Grid for the menu grid view.

Operator logo

To set your phone to display or hide the operator logo, press Menu, and select

Settings, Display settings and Operator logo. If you have not saved the operator

logo, the Operator logo menu is dimmed.

Note that the operator logo is not displayed when the phone activates the screen

saver.

For more information on availability of an operator logo, contact your network

operator or service provider. See also PC Suite on page 134.

Screen saver

The digital clock screen saver is used for power saving in standby mode. It is

activated when none of the phone’s functions have been used for a certain time.

Press any key to deactivate the screen saver. The screen saver is also deactivated

when the phone is out of the network coverage area.

Press Menu, and select Settings, Display settings and Screen saver timeout. Select

the timeout after which the digital clock display will be activated from 5 seconds

to 60 minutes.

Note that the screen saver overrides all the graphics and texts on the display in

standby mode.

Display brightness

You can change the display brightness level used on the phone display.

Press Menu, and select Settings, Display settings and Display brightness. Scroll

with

and

to decrease and increase the brightness level, and press OK to

accept it.

Tone settings

Press Menu, and select Settings and then Tone settings. You can find the same

settings in the Profiles menu, see Profiles (Menu 4) on page 79. Note that the

settings you make, will change the settings in the active profile.

Select Incoming call alert to choose how the phone notifies you of an incoming

voice call. The options are Ringing, Ascending, Ring once, Beep once and Off.

Select Ringing tone for incoming voice calls. To select ringing tones that have

been saved in the Gallery, select Open gallery from the ringing tone list.

Select Ringing volume and Vibrating alert for incoming voice calls and messages.

The vibrating alert does not work when the phone is connected to a charger, a

desktop stand, or a car kit.

Tip: If you receive a ringing tone via infrared connection or by

downloading, you can save the ringing tone in the Gallery.

Select Message alert tone to set the alert tone for the incoming messages, Keypad

tones, or Warning tones to set the phone to sound tones, for example, when the

battery is running out of power.

Select Alert for to set the phone to ring only upon calls from phone numbers that

belong to a selected caller group. Scroll to the caller group you want or All calls

and press Mark.

Enhancement settings

The enhancement settings menu is shown only if the phone is or has been

connected to some mobile enhancements, chargers and handsfree units, for

example.

Press Menu, and select Settings and Enhancement settings. You can select

Headset, Handsfree, Loopset, Text phone, Music stand or Charger, if the

corresponding enhancement is or has been connected to the phone. Depending on

the enhancement, you can select some of the following options:

•

Default profile to select the profile that you want to be automatically

activated when you connect to the selected enhancement. You can select

another profile while the enhancement is connected.

•

Automatic answer to set the phone to answer an incoming call automatically

after five seconds. If the Incoming call alert is set to Beep once or Off,

automatic answer will not be used.

Lights to set the lights permanently On. Select Automatic to set the lights on

for 15 seconds after a keypress.

• When the phone is connected to the full car kit, select Ignition detector and On

to automatically switch off the phone approximately 20 seconds after you

have switched off the car’s ignition.

• For Text phone, select Use text phone and select Yes to use the text phone

settings instead of headset or loopset settings.

Security settings

When security features that restrict calls are in use (such as call barring, closed user group

and fixed dialing) calls still may be possible to the official emergency number programmed

into your device.

Press Menu, and select Settings and Security settings. Select

•

PIN code request to set the phone to ask for your PIN code every time the

phone is switched on. Some SIM cards do not allow the PIN code request to be

turned off.

•

Call barring service (network service) to restrict incoming calls to and outgoing

calls from your phone. A barring password is required.

•

Fixed dialling to restrict your outgoing calls and text messages to selected

phone numbers if this function is supported by your SIM card. The PIN2 code is

required.

When the fixed dialling is on, GPRS connections are not possible except while

sending text messages over a GPRS connection. In this case, the recipient’s

phone number and the message centre number have to be included on the

fixed dialling list.

•

Closed user group. Closed user group is a network service that specifies the

group of people whom you can call and who can call you. For more information

contact your network operator or service provider.

Security level. Select Phone and the phone will ask for the security code

whenever a new SIM card is inserted into the phone.

Select Memory and the phone will ask for the security code when the SIM

card’s memory is selected and you want to change the memory in use, (see

Selecting settings for contacts on page 71) or copy from one memory to

another (Copying contacts on page 75).

•

Access codes to change the security code, PIN code, PIN2 code or barring

password. Codes can only include numbers from 0 to 9.

Restore factory settings

To reset some of the menu settings to their original values, press Menu, and select

Settings and Restore factory settings. Key in the security code and press OK. Note

that the data you have keyed in or downloaded, for example, the names and phone

numbers saved in Contacts are not deleted.

■ Radio (Menu 6)

The FM radio uses the wire of the headset as an antenna. A compatible

headset needs to be attached to the device for the FM radio to function

properly.

Note that the quality of the radio broadcast depends on the radio station’s

coverage in that particular area.

Warning: Listen to music at a moderate level. Continuous exposure to high

volume may damage your hearing.

1. To turn on the radio, press Menu and select Radio. The display shows the

• Channel location number and the name of the radio channel if you have

saved the channel.

• Frequency of the radio channel.

2. If you have already saved radio channels, you can scroll to the channel you

would like to listen to, or select a radio channel location 1 to 9 by pressing the

corresponding number key.

When using the compatible headset supplied with the headset key, press the

key to scroll to the desired saved radio channel.

3. When the radio is on, press Options and select Switch off to turn off the radio.

Tip: To quickly turn off the radio, press and hold

Tuning a radio channel

When the radio is on, press and hold

to start the channel search.

Searching stops when a channel is found. To save the channel, press Options, and

select Save channel. Key in the name of the channel and press OK. Select the

location where you want to save the channel.

Tip: To quickly save the channel in a location 1 to 9, press and hold the

corresponding number key, then key in the name of the channel and press

OK.

Using the radio

When the radio is on, press Options and select

•

Switch off to turn off the radio.

Save channel to save the radio channel you have found, refer to Tuning a radio

channel above. Up to 20 radio channels can be saved.

•

Automatic tuning. Briefly press

upwards or downwards. The search stops when a channel has been found,

press OK. To save the channel, see Save channel above.

to start the channel search

Manual tuning. Briefly press

to move the channel search 0.1

MHz upwards or downwards or press and hold down the keys to quickly search

upwards or downwards for a channel. To save the channel, press OK and see

Save channel above.

Tip: To quickly select Manual tuning, press

when in the Radio

menu.

•

Set frequency. If you know the frequency of the radio channel you would like

to listen to (between 87.5 MHz and 108.0 MHz), key it in and press OK. To save

the channel, see Save channel above.

Tip: To quickly select Set frequency, press

when in the Radio

menu.

•

Delete channel. To delete a saved channel, scroll to it, press Delete, and OK.

Rename. Key in a new name for the saved channel and press OK.

Loudspeaker (or Headset) to listen to the radio using the loudspeaker (or

headset). Keep the headset connected to the phone. The lead of the headset

functions as the radio antenna.

•

Mono output (or Stereo output) to listen to the radio in mono (or in stereo).

You can normally make a call or answer an incoming call while listening to the

radio. The volume of the radio is muted. When you end the call, the radio will

automatically be turned on.

When an application using a GPRS or HSCSD connection is sending or receiving

data, it may interfere with the radio.

■ Camera (Menu 7)

In this menu you can take photos with the phone’s built-in

camera and adjust its settings. The camera lens is on the back of

the phone, and the display of the phone works as a viewfinder. The camera

produces JPEG pictures.

If there is not enough memory to take a new photo, you need to free some by

deleting old photos or other files in the gallery. Note that the camera uses shared

memory, see Shared Memory on page 12.

The Nokia 6610i phone supports an image capture resolution of 352 x 288 pixels. The image

resolution in these materials may appear different.

To take a photo

1. Press Menu, and select Camera and Standard photo, Portrait photo or if the

lighting is dim for taking photos, select Night mode. If you want to add the

photo to a name/phone number saved in contacts, select Portrait photo.

Tip: To quickly open the camera viewfinder with standard photo view,

press

in standby mode.

2. The live image appears on the display, and you can use the display as a

viewfinder.

3. To take a photo, press Capture. The phone saves the photo in the Photos folder

of the Gallery menu. The saved photo will be shown on the display.

To define the default title for the photo, see Default title in Camera settings on

page 96.

4. Select Back to take another photo, or press Options and select, for example, an

option to delete or rename the saved photo, send it as a multimedia message,

or attach the photo to a name or phone number in contacts, or access the

gallery.

Tip: You can activate the self-timer of the camera for one picture at a time.

Press Menu, and select Camera, Self-timer and Standard photo, Portrait

photo or Night mode. Press Start, and after the timeout, the camera takes

the photo and saves it in the Gallery menu. While the self-timer is running,

a beeping sound is heard.

Camera settings

Press Menu, and select Camera and Settings. Select

•

Image quality to define how much the photo file will be compressed when

saving the image. Select High, Normal or Basic. High provides the best image

quality but takes more memory.

•

Camera sounds to set the shutter sound and the self-timer tone to On or Off.

Default title to define the title that will be used when saving a photo. If you

select Automatic, the default title will be used, or if you select My title, you can

key in or edit a new title.

■ Gallery (Menu 8)

In Gallery you can manage images, photos and tones saved in

your phone.

The gallery uses shared memory, see Shared Memory on page 12.

1. Press Menu and select Gallery. The list of options is shown.

2. Select View folders to open the list of folders.

Other available options are:

•

Add folder to add a new folder. Key in a name for the folder and press OK.

Delete folder to select the folder you want to delete. You cannot delete the

original folders on the phone.

•

Rename folder to select the folder you want to rename. You cannot rename

the original folders on the phone.

Gallery downloads to download more images and tones. Select Image

downloads or Tone downloads, respectively. The list of available browser

bookmarks is shown. Select More bookmarks to access the list of bookmarks

in the Services menu, see Bookmarks on page 127.

Select the appropriate bookmark to connect to the desired page. If the

connection fails, you may not be able to access the page from the service

whose connection settings are currently active. In this case, enter the

Services menu and activate another set of service settings, see Making a

connection to a service on page 123. Try again to connect to the page.

For the availability of different services, pricing and tariffs, contact your

network operator and/or the service provider. Download content only from

the sources you trust.

3. Open the folder you want and the list of files in the folder is shown. Photos,

Graphics and Tones are the original folders in the phone.

Press Options and some of the following options are available:

•

Open to open the selected file.

Delete to delete the selected file.

•

Send to send the selected file via MMS.

Move to move a file to another folder.

Rename to give a new name to the file.

Set as wallpaper to set the selected image file as wallpaper.

Set as ring tone to set the selected sound file as the ringing tone.

Details to see the details of the file, for example the size of the file.

Sort to sort the files and folders by date, type, name or size.

Delete all to delete all the files in the selected folder.

Edit image to insert text, a frame or clip-art into the selected picture.

4. Open the file you want. Press Options and some of the following options are

available:

•

Play (Pause) to listen to or to view a sound or image file that is contained in

the message.

•

Zoom to increase the size of the image that is contained in the message.

Mute audio (Unmute audio) to mute (unmute) the sound file.

Set contrast to adjust the contrast level of the image.

Set as wallpaper to set the selected image file as wallpaper.

Set as ring tone to set the selected sound file as the ringing tone.

Edit image to insert text, a frame or clip-art to the selected picture.

Details to see the details of the file, for example the size of the file.

Delete to delete the selected file.

•

Send to send the selected file via MMS.

Rename to give a new name to the file.

View in sequence to view the files in the folder sequentially.

Note that copyright protections may prevent some images, ringing tones and

other content from being copied, modified, transferred or forwarded.

■ Organiser (Menu 9)

Alarm clock

The alarm clock uses the time format set for the clock. The alarm clock works even

when the phone is switched off if there is enough power in the battery.

Press Menu, and select Organiser and Alarm clock.

• Select Alarm time, key in the alarm time and press OK.

To change the alarm time, select On.

• Select Alarm tone and select the default alarm tone, personalise the alarm

tone by selecting one from the ringing tone list or from the gallery, or set a

radio channel as the alarm tone.

If you select the radio as an alarm tone, connect the headset to the phone. The

phone uses the most recent channel you listened to as an alarm tone via the

loudspeaker. If the headset is removed, the default alarm tone will be used

instead of the radio.

When the alarm time expires

The phone will sound an alert tone, and flash Alarm! and the current time on the

display.

Press Stop to stop the alarm. If you let the phone continue to sound the alarm for

a minute or press Snooze, the alarm stops for about ten minutes and then

resumes.

If you have selected the radio as an alarm tone, instead of Snooze the phone asks

whether you want to switch off the radio or not.

If the alarm time is reached while the device is switched off, the device switches itself on

and starts sounding the alarm tone. If you press Stop, the device asks whether you want to

activate the device for calls. Press No to switch off the device or Yes to make and receive

calls. Do not press Yes when wireless phone use may cause interference or danger.

Calendar

The calendar helps you to keep track of reminders, calls that you need to make,

meetings, and birthdays.

The calendar uses shared memory, see Shared Memory on page 12.

Press Menu, and select Organiser and Calendar.

Tip: To quickly open the Calendar menu, press

in standby mode.

Scroll to the day you want. The current day is indicated by a frame around

the day. If there are any notes set for the day, the day is in bold type. To view the

day notes, press Options and select Day notes.

100

• To view a single note, scroll to the note you want to view, press Options and

select View. The note view allows you to view the details of the selected note.

You can scroll through the note.

• For example, there are also options for making a note, or for sending a note via

IR, or as a note directly to another compatible phone’s calendar or as a text

message.

There are also options for deleting, editing, moving and repeating a note and

for copying a note to another day.

Settings to set the date, time, date or time format, or the first day of the week.

In the Auto-delete option you can set the phone to delete old notes

automatically after a specified time. However, the repeat notes, for example,

birthday notes, will not be deleted.

Making a calendar note

For keying in letters and numbers, see Writing text on page 39.

Press Menu, and select Organiser and Calendar. Scroll to the date you want, press

Options and select Make a note. Select one of the following note types:

•

Meeting - Key in the note (or press Options and search for the name in

contacts). Press Options and select Save. Key in the location for the meeting

and press Options and select Save. Key in the start time for the meeting and

press OK, and then the end time and press OK. To set the alarm for the note,

select With tone or Silent (no alarm tone) and then set the alarm time.

•

Call - Key in the phone number, press Options and select Save. Key in the

name, press Options and select Save. (Instead of keying in the phone number,

101

press Options to search for the name and number in contacts.) Then key in the

time for the call and press OK. To set the alarm for the note, select With tone or

Silent (no alarm tone) and then set the alarm time.

•

Birthday - Key in the person’s name (or press Options and search for it in

contacts), press Options and select Save. Then key in the year of birth, and

press OK. To set the alarm for the note, select With tone or Silent (no alarm

tone) and then set the alarm time.

•

Memo - Key in the note, press Options and select Save. Key in the end day

for the note and press OK. To set the alarm for the note, select With tone or

Silent (no alarm tone) and then set the alarm time.

Reminder - Key in the subject for the reminder, press Options and select

Save. To set the alarm for the note, select Alarm on and then set the alarm

time.

When you have set the alarm, the indicator

notes.

is displayed when you view the

When the phone sounds an alarm for a note

The phone beeps, and displays the note. With a call note

on the display, you

can call the displayed number by pressing

. To stop the alarm and view the

note, press View. To stop the alarm without viewing the note, press Exit.

102

To-do list

You can save a note for a task that you have to do, select a priority level for the

note and mark it as done when you have completed it. You can sort the notes by

priority or by date.

The to-do list uses shared memory, see Shared Memory on page 12.

Press Menu, and select Organiser and To-do list and the list of notes is shown.

Press Options, or scroll to the desired note and press Options.

• To add a new note, select Add. Key in the subject for the note. When you have

keyed in the maximum number of characters for a note, no further characters

are accepted. Press Options and select Save. Select the priority for the note,

High, Medium, or Low. The phone automatically sets the deadline without an

alarm for the note. To change the deadline, view the note and select the option

for the deadline.

Dictionary, refer to Setting predictive text input on or off on page 39.

• For example, you can also view and delete the selected note and delete all the

notes that you have marked as done. You can sort the notes by priority or by

deadline, send a note to another phone, save a note as a calendar note, or

access the calendar.

While viewing a note, you can also, for example, select an option to edit the

selected note, edit the deadline or priority for the note, or mark the note as

done.

103

■ Games (Menu 10)

Launching a game

1. Press Menu, and select Games and Select game.

2. Scroll to a game or a game set (the name depends on the game).

3. Press Options and select Open or press

. If the selection is a single game

it will be launched.

Otherwise, a list of games in the selected game set is displayed. To launch a

single game, scroll to the desired game and press Options and select Open, or

press

Note that running some games may consume the phone’s battery faster (and you

may need to connect the phone to the charger).

Other options available for a game or game set

Options for games, see Other options available for an application or application

set on page 106 .

Game downloads

Press Menu, and select Games and Game downloads. The list of available

bookmarks is shown. Select More bookmarks to access the list of bookmarks in the

Services menu, see Bookmarks on page 127.

Select the appropriate bookmark to connect to the desired page. If the connection

fails, you may not be able to access the page from the service whose connection

settings are currently active. In this case, enter the Services menu and activate

104

another set of service settings, see Making a connection to a service on page 123.

Try again to connect to the page.

For the availability of different services, pricing and tariffs, contact your network

operator and/or the service provider.

To download more games, refer also to Downloading an application on page 107.

Note that when downloading a game, it may be saved in the Applications menu

instead of the Games menu.

Important: Only install applications from sources that offer adequate protection

against harmful software.

Memory status for games

To view the amount of memory available for game and application installations,

press Menu, and select Games and Memory. See also Memory status for

applications on page 108.

The games use shared memory, see Shared Memory on page 12.

Game settings

Press Menu, and select Games and Settings to set sounds, lights and shakes for

the game.

105

■ Applications (Menu 11)

Launching an application

1. Press Menu, and select Applications and Select application.

2. Scroll to an application or an application set (the name depends on the

application).

3. Press Options and select Open or press

. If the selection is a single

application it will be launched.

Otherwise, a list of applications in the selected application set is displayed. To

launch a single application, scroll to the desired application and press Options

and select Open, or press

Note that running some applications may consume the phone’s battery faster

(and you may need to connect the phone to the charger).

Other options available for an application or application set

•

Delete to delete the application or application set from the phone.

Note that if you delete a pre-installed application or an application set from

your phone, you may download it again to your phone from the Nokia Software

Market, http://www.softwaremarket.nokia.com/wap.

106

•

Web access to restrict the application from accessing the network. Select Ask

first to set the application to ask for your permission to connect to the

network, or Allowed / Not allowed to allow or not allow the connection.

•

Update version to check if a new version of the application is available for

download from the services (network service).

Web page to provide further information or additional data for the application

from an Internet page. This feature needs to be supported by the network. It is

only shown if an Internet address has been provided with the application.

•

Service settings for some applications that need specific service settings. Your

phone is set to use as default the service settings for the browser.

Details to give additional information about the application.

Downloading an application

Your phone supports Java technology (J2ME) applications. Make sure that the

application is compatible with your phone before downloading it. You can

download new Java applications in different ways:

• Press Menu, and select Applications and App. downloads and the list of

available bookmarks is shown. Select More bookmarks to access the list of

bookmarks in the Services menu, see Bookmarks on page 127.

Select the appropriate bookmark to connect to the desired page. If the

connection fails, you may not be able to access the page from the service

whose connection settings are currently active. In this case, enter the Services

107

menu and activate another set of service settings, see Making a connection to

a service on page 123. Try again to connect to the page.

For the availability of different services, pricing and tariffs, contact your

network operator and/or service provider.

• Press Menu, and select Services and Download links. Select to download an

appropriate application or game. See Downloading on page 128.

• Use the game download functionality, see Game downloads on page 104.

• Use the Nokia Application installer from PC Suite to download the applications

in your phone.

Important: Only install applications from sources that offer adequate protection

against harmful software.

Note that when downloading an application, it may be saved in the Games menu

instead of the Applications menu.

Memory status for applications

To view the amount of memory available for game and application installations,

press Menu, and select Applications and Memory.

The applications use shared memory, see Shared Memory on page 12.

108

■ Extras (Menu 12)

Calculator

The calculator in your phone adds, subtracts, multiplies, divides, calculates the

square and the square root and converts currency values.

Note: This calculator has limited accuracy and is designed for simple calculations.

1.Press Menu, and select Extras and Calculator.

2. When ’0’ is displayed on the screen, key in the first number in the calculation,

press

for a decimal point.

3. Press Optionsand select Add, Subtract, Multiply, Divide, Square, Square root or

Change sign.

Tip: Alternatively, press

times to multiply or four times to divide.

4. Key in the second number.

once to add, twice to subtract, three

5. For a total, press Options and select Equals. Repeat steps 3 to 5 as many times

as is necessary.

6. To start a new calculation, first press and hold Clear.

Performing a currency conversion

1. Press Menu, and select Extras and Calculator.

2. To save the exchange rate, press Options and select Exchange rate. Select

either of the displayed options. Key in the exchange rate, press

for a

109

decimal point, and press OK. The exchange rate remains in the memory until

you replace it with another one.

3. To perform the currency conversion, key in the amount to be converted, press

Options and select In domestic or In foreign.

Tip: You can also perform the currency conversion in standby mode. Key in

the amount to be converted, press Options and select In domestic or In

foreign.

Countdown timer

Press Menu, and select Extras and Countdown timer. Key in the alarm time in

hours and minutes and press OK. If you wish, write your own note text which is

displayed when the time expires, and press OK to start the countdown timer.

• To change the countdown time, select Change time, or to stop the timer, select

Stop timer.

If the alarm time is reached when the phone is in standby mode, the phone sounds

a tone and flashes the note text if it is set or else Countdown time up. Stop the

alarm by pressing any key. If no key is pressed, the alarm automatically stops

within 30 seconds. To stop the alarm and to delete the note text, press OK.

Stopwatch

You can measure time, take intermediate times or lap times using the stopwatch.

During timing, the other functions of the phone can be used. To set the stopwatch

timing in the background, press

110

Using the stopwatch or allowing it to run in the background when using other features

increases the demand on battery power and reduces the battery life.

Time observation and time splitting

1. Press Menu, and select Extras, Stopwatch and Split timing. You can select

Continue if you have set the timing in the background.

2. Press Start to start the time observation. Press Split every time you want to

take an intermediate time. The intermediate times are listed below the running

time on the display. Scroll to view the times.

3. Press Stop to stop the time observation.

4. Press Options and select

Start to start the time observation again. The new time is added to the previous

time.

Save to save the time. Key in a name for the measured time and press OK. If no

name is keyed in, the total time is used as the title.

Reset to reset the time without saving it.

Lap times

Press Menu, and select Extras, Stopwatch and Lap timing. Press Start to start the

time observation and Lap to take a lap time. Press Stop to stop the lap timing.

Press Options and you can save or reset the lap times. Refer to Time observation

and time splitting above.

Viewing and deleting times

Press Menu, and select Extras, and Stopwatch.

111

If the stopwatch is not reset, you can select Show last to view the most recent

measured time. Select View times and a list of names or final times of the time

sets is shown, select the time set you want to view.

To delete the saved times, select Delete times. Select Delete all and press OK, or

select One by one, scroll to the times you want to delete, press Delete and press

OK.

Wallet

In Wallet you can save personal information, for example, credit card numbers

and make purchases with your phone where supported by the service provider.

You can access wallet via the Wallet menu or via the browser, see Options while

browsing on page 125.

When you access wallet for the first time, you need to create your own wallet

code. At Create wallet code: key in the code and press OK to confirm it and at

Verify wallet code: key in the code again and press OK.

If you want to delete all the content of the wallet and the wallet code, key in

*#7370925538# (*#res0wallet# in letters) in standby mode. You also need the

phone’s security code.

See also General information on page 14.

Saving and changing personal card information

To access the wallet, press Menu, select Extras and Wallet. If required, key in your

wallet code and press OK, see Wallet settings on page 114. Select Cards to view

the list of cards. The maximum number of cards is five. Scroll to the desired card.

112

• To save information on a card, press Options and select View. Select

•

Card info to key in, for example, card holder’s name, card type, number and

expiry information.

•

User info to save user name and password for accessing sites.

Shipping info to save your contact information.

Billing info to save the contact information in case the invoicing address

differs from your own, for example, with company credit cards.

•

Receipt info to save phone numbers and e-mail addresses where you want

the service provider to send a receipt of your purchase.

• To make a copy of the card, press Options and select Copy card.

• To delete all the information on the card, press Options and select Clear card.

• To rename the card, press Options and select Rename card.

Personal notes

You can save up to 30 confidential personal notes, for example, passwords, codes

or notations.

Press Menu, select Extras, Wallet and Personal notes. Press Options and you can

view, add, edit a selected note and sort notes either by name or date or delete

notes. When viewing a note, the option Edit is for editing a note, and Send via text

msg. copies the note as a text message. Copy to calendar copies the note to the

calendar as a memo. Use detail extracts numbers, e-mail addresses and web

addresses from a note.

113

Wallet settings

Press Menu, select Extras, Wallet and Settings. Select

•

Code request to set the wallet code request to on or off. You need to key in the

correct wallet code before you can set the code request to on or off. Note that

if you set the code request Off, the wallet can be accessed without a wallet

code.

•

Change code to change the wallet code.

Guidelines for paying for your purchases with wallet

1. Access the desired site that supports wallet, to do your shopping, see Making a

connection to a service on page 123, and choose the product you want to buy.

Read carefully all information provided before your purchase.

Note: The text may not fit within a single screen. Therefore, make sure

to scroll through and read all of the text before signing.

2.To pay for the items you wish to purchase, press Options and select

Use wallet info. See Options while browsing on page 125.

3. Select the card you want to pay with. Fill in the data form you receive from the

service provider by transferring the credit card details from the wallet. If you

want to fill in all the fields automatically, select Fill in all fields. The option is

shown only when the service supports the Electronic Commerce Modelling

Language standard. You can also fill the form by selecting information fields

from the card one by one. The phone displays the filled form.

4. Approve the purchase, and the information is sent forward.

114

5. You may receive a sign-in document from the service that you need to sign to

make the purchase binding, see Digital signature on page 132.

6. To close the wallet, select Close wallet. See Options while browsing on page

125.

Synchronisation

Synchronisation allows you to save your calendar and contacts data in a remote

Internet server or in a compatible PC. If you have saved data in the remote

Internet server, you can synchronise your phone by starting the synchronisation

from your phone. Synchronising to the remote server is a network service. You can

also synchronise the data in your phone’s contacts and calendar to correspond

with the data of your compatible PC by starting the synchronisation from the PC.

The contact data in your SIM card will not be synchronised.

Note that answering an incoming call during synchronisation will end the

synchronisation and you need to start it again.

Synchronising from your phone to a remote server

Before synchronising from your compatible phone, you may need to do the

following:

• Subscribe to a synchronisation service. For more information on availability

and the synchronisation service settings, contact your network operator or

service provider.

115

• Retrieve the synchronisation settings from your network operator or service

provider.

You may receive the synchronisation settings as an OTA message, see Saving

the synchronisation settings received as an OTA message on page 116 or you

may have to key in the settings manually, see Keying in the synchronisation

settings manually on page 117.

To start the synchronisation from your phone:

1. Press Menu, and select Services, Active service settings and select the

connection settings you need for synchronisation.

The synchronisation settings may differ from the service settings required for

browsing. After synchronising, change your Active service settings back to the

previous ones if you want to use other services later.

2. Mark the data to be synchronised. See Data to be synchronised in Keying in the

synchronisation settings manually on page 117.

3. Press Menu, and select Extras, Synchronisation and Synchronise.

4. The marked data of the active set will be synchronised after confirmation.

Note that synchronising for the first time or after an interrupted

synchronisation may take time up to 30 minutes, if contacts or calendar are

full.

Saving the synchronisation settings received as an OTA message

When you receive the synchronisation settings as an OTA message,

Synchronisation settings received is displayed.

116

Press Options and select Details to view the received settings first, Save to save

the synchronisation settings, or Discard to discard them.

Keying in the synchronisation settings manually

Press Menu, select Extras, Synchronisation and Settings.

Select Active Internet sync. settings.

You need to activate the set where you want to save the synchronisation settings.

A set is a collection of settings required to make a connection to a service.

Scroll to the set you wish to activate and press Activate.

Select Edit active Internet sync. settings. Select each setting one by one and key in

all the required settings.

•

Settings’ name. Key in the name for the set and press OK.

Data to be synchronised. Mark the data you want to synchronise, Contacts and/

or Calendar, and press Done.

•

Database addresses. Select Contacts database and/or Calendar database to be

edited. Key in the name of the database and press OK.

•

User name. Key in the user name and press OK.

Password. Key in the password and press OK.

Synchronisation server. Key in the name of the server and press OK.

117

Synchronising from a compatible PC

To synchronise contacts and calendar from a compatible PC, use either an IR

connection or a data cable. You also need the PC Suite software of your phone

installed on the PC. Start the synchronisation from the PC using PC suite.

■ Connectivity (Menu 13)

Infrared

You can set up the phone to receive data through its infrared (IR) port. To use an IR

connection, the device with which you want to establish a connection must be

IrDA compliant. You can send or receive data such as business cards and calendar

notes to or from a compatible phone or data device (for example, a computer) via

the IR port of your phone.

Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR

devices. This device is a Class 1 laser product.

Sending and receiving data via IR

• Ensure that the IR ports of the sending and receiving devices are pointing at

each other and that there are no obstructions between the devices. The

preferable distance between the two devices in an infrared connection is 1

metre at most.

• To activate the IR port of your phone to receive data via IR, press Menu, and

select Connectivity and Infrared.

• The user of the sending phone selects the desired IR function to start data

transfer.

118

If data transfer is not started within 2 minutes after the activation of the IR port,

the connection is cancelled and has to be started again.

IR connection indicator

• When

phone is ready to send or receive data via its IR port.

• When blinks, your phone is trying to connect to the other device or a

connection has been lost.

is shown continuously, the IR connection is activated and your

GPRS

GPRS connection

GPRS is a network service. You can set the phone to automatically register to a

GPRS network when you switch the phone on. Press Menu, and select

Connectivity, GPRS, GPRS connection and Always online. When you start an

application using GPRS, the connection between phone and network is

established, and data transfer is possible. When you end the application, the GPRS

connection is ended but the registration to the GPRS network remains.

If you select When needed, the GPRS registration and connection are established

when an application using GPRS needs it and closed when you end the

application.

When Always online is selected and the GPRS service is available, the indicator

is shown on the top left of the display. When the GPRS connection is established,

the indicator

is shown. If you receive a call or a text message, or make a call

119

during a GPRS connection, the indicator will be shown on the top right of the

display to indicate that the GPRS connection is suspended (on hold).

Note that your phone supports three simultaneous GPRS connections. For

example, you can browse pages, receive multimedia messages and have an

ongoing PC dial-up connection at the same time.

GPRS modem settings

You can connect the phone via an infrared or a data cable connection to a

compatible PC and use the phone as a modem to enable GPRS connectivity

(network service) from the PC.

Press Menu, and select Connectivity, GPRS and GPRS modem settings. Select

Active access point and activate the access point you want to use. Select Edit

active access point to change the access point settings.

• Select Alias for access point. Key in the name you would like for the activated

access point and press OK.

• Select GPRS access point. Key in the Access Point Name (APN) to establish a

connection to a GPRS network and press OK. Contact your network operator or

service provider for the access point name.

You can also set the GPRS dial-up service settings (Access Point Name) on your PC

using the Nokia Modem Options software, see PC Suite on page 134. If you have

set the settings both on your PC and on your phone, note that the PC’s settings

will be used.

120

■ Services (Menu 14)

You can access various services on the Internet. For example,

these services may include weather reports, news or flight times

and financial information.

Check the availability of these services, pricing and tariffs with your network

operator and/or the service provider whose service you wish to use. The service

provider will also give you instructions on how to use their services.

With your phone’s multi-mode browser you can view the services that use

Wireless Mark-Up Language (WML) or extensible HyperText Markup Language

(xHTML) on their pages. Since the phone’s display and the memory capacity are

much smaller than in a computer, Internet content is displayed differently on the

phone’s display. Note that you may not be able to view all details on the Internet

pages.

Basic steps for accessing and using services

1. Save the service settings that are required to access the service that you want

to use. See page 122.

2. Make a connection to the given service. See page 123.

3. Start browsing the pages of the service. See page 124.

4. Once you are finished browsing, end the connection to the service. See page

125.

121

Setting up the phone for a service

You may receive the service settings as an OTA message from the network

operator or service provider that offers the service that you want to use. You can

also key in the settings manually or add and edit the settings with PC Suite.

For more information and for appropriate settings, contact your network operator

or service provider that offers the service that you want to use. The settings may

be available, for example, on their website.

Saving the service settings received as an OTA message

When you receive the service settings as an OTA message, Service settings

received is displayed.

• To save the received settings, press Options and select Save.

If no settings are saved in Active service settings, the settings are saved under

the first free connection set and are also activated.

If there are settings saved in Active service settings, Activate saved service

settings? will be displayed. To activate the saved settings, press Yes, or to save

them only, press No.

• To view the received settings first, press Options and select View. To save the

settings, press Save.

• To discard the received settings, press Options and select Discard.

Keying in the service settings manually

1. Press Menu, and select Services, Settings and Connection settings.

2. Select Active service settings.

122

3. Scroll to the connection set you would like to activate and press Activate.

You need to activate the connection set where you want to save the service

settings. A connection set is a collection of settings required to make a

connection to a service.

4. Select Edit active service settings.

Select each of the settings one by one and key in all the required settings

according to the information you have received from your network operator or

service provider. Note that all the bearer-related settings are in the Bearer

settings menu.

Making a connection to a service

1. Firstly, make sure that the service settings of the service you want to use are

activated. To activate the settings:

• Press Menu, and select Services, Settings and Connection settings. Select

Active service settings and scroll to the connection set you want to activate

and press Activate.

2. Secondly, make a connection to the service. There are three ways to connect:

• Open the start page, for example, the homepage of the service provider:

Press Menu, and select Services and Home, or in standby mode press and

hold

• Select a bookmark of the service:

Press Menu, and select Services, Bookmarks, and select a bookmark.

123

If the bookmark does not work with the current active service settings,

activate another set of service settings and try again.

• Key in the address of the service:

Press Menu, and select Services and then Go to address. Key in the address

of the service and press OK.

Note that it is not necessary to add the prefix http:// in front of the address

since it will be added automatically.

Browsing the pages of a service

After you have made a connection to the service, you can start browsing its pages.

The function of the phone keys may vary in different services. Follow the text

guides on the phone display. For more information, contact your service provider.

Note that if GPRS is selected as the data bearer, the indicator

is shown on the

top left of the display during browsing. If you receive a call or a text message, or

make a call during a GPRS connection, the indicator will be shown on the top

right of the display to indicate that the GPRS connection is suspended (on hold).

After the call, for example, the phone tries to reconnect the GPRS connection.

Using the phone keys while browsing

• Use any of the scroll keys to browse through the page.

• To select a highlighted item, press

• To enter letters and numbers, press the keys

characters, press the key

and to enter special

124

Options while browsing

Press Options and the following options may be available. The service provider

may also offer other options. Select

•

Home to return to the homepage.

Add bookmark to save the page as a bookmark.

Bookmarks. See Bookmarks on page 127.

Download links to show the list of bookmarks for downloading.

Shortcuts to open a new list of options that are, for example, specific to the

page.

•

Other options to show a list of other options, for example, options for wallet

and some security options.

•

Reload to reload and update the current page.

Quit. See Disconnect from a service on page 125.

Direct calling

The multi-mode browser supports functions that you can access while browsing.

You can make a voice call, send DTMF tones while a voice call is in progress, and

save in contacts a name and a phone number from a page.

Disconnect from a service

To quit browsing and to end the connection, press Options and select Quit. When

Quit browsing? is shown, press Yes.

125

Alternatively, press

. If GSM data is the selected data bearer, press

twice. The phone ends the connection to the service.

Appearance settings of the multi-mode browser

1. While browsing, press Options and select Other options and Appear. settings,

or in standby mode, press Menu, and select Services, Settings and Appearance

settings.

2. Select Text wrapping. Select On and the text continues on the next line if it

cannot be shown on one line. If you select Off, the text is abbreviated if it is too

long to be shown on one line.

Select Show images. Select No and any pictures appearing on the page are not

shown. This can speed up the browsing of pages that contain a lot of pictures.

A cookie is data that a site saves in your phone’s browser cache memory. The data

can be, for example, your user information or your browsing preferences. Cookies

will be saved until you clear the cache memory, see The cache memory on page

129.

1. While browsing, press Options and select Other options, Security and Cookies,

or in standby mode, press Menu, and select Services, Settings, Security settings

and Cookies.

2. Select Allow or Reject to allow or prevent the phone receiving cookies.

126

A cache is a memory location that is used to store data temporarily. If you have tried to

access or have accessed confidential information requiring passwords, empty the cache

after each use. The information or services you have accessed is stored in the cache. To

empty the cache, see The cache memory on page 129.

Bookmarks

You can save page addresses as bookmarks in the phone’s memory.

1. While browsing, press Options and select Bookmarks,

or in standby mode, press Menu, and select Services and Bookmarks.

2. Scroll to the bookmark you want to use and press Options.

3. Select Go to to make a connection to the page associated with the bookmark.

You can also view the title and the address of the selected bookmark, edit or

delete the selected bookmark, or send it directly to another phone as a

bookmark, or as an OTA message, or create a new bookmark.

Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does

not warrant or endorse these sites. If you choose to access them, you should take the same

precautions, for security or content, as you would with any Internet site.

Receiving a bookmark

When you have received a bookmark (sent as a bookmark) 1 bookmark received is

displayed. Press View, then press Options and select View to view the bookmark,

Save to save the bookmark, or Discard to discard it.

127

Downloading

1. To download more tones, images, games or applications to your phone, press

Menu, and select Services and Download links.

2. Select Tone downloads, Image downloads, Game downloads or App. downloads

to download tones, images, games or applications, respectively.

Important: Only install applications from sources that offer adequate protection

against harmful software.

Service inbox

The phone is able to receive service messages (pushed messages) sent by your

service provider. Service messages are notifications of, for example, news

headlines, and they may contain a text message or an address of a service.

To access the Service inbox in standby mode, when you have received a service

message, press Show.

•

If you press Exit the message is moved to the Service inbox. To access the

Service inbox later, press Menu, and select Services, Settings and Service

inbox.

To access the Service inbox while browsing, press Options and select Other

options andService inbox. Scroll to the message you want, press Options. Select

Retrieve to activate the multi-mode browser and download the marked content,

or Details to display detailed information on the service notification, or select

Delete to delete it.

128

Service inbox settings

Press Menu, and select Services, Settings and Service inbox settings.

• Select Service messages and On (or Off) to set the phone to receive (or not to

receive) service message.

• Select Automatic connection. If you have set the phone to receive service

messages and select Automatic connection on, the phone will automatically

activate the browser when the phone has received a service message.

If you select Automatic connection off, the phone will activate the browser

only after you have selected Retrieve when the phone has received a service

message.

The cache memory

The information or services you have accessed are stored in the cache of your

phone. A cache is a buffer memory, which is used to store data temporarily. To

empty the cache:

• while browsing, press Options and select Other options and Clear the cache, or

• in standby mode, press Menu, and select Services, and Clear the cache.

Browser security

Security features may be required for some services, such as banking services or

shopping on a site. For such connections you need security certificates and

possibly a security module which may be available on your SIM card. For more

information, contact your service provider.

129

Security module

The security module can contain certificates as well as private and public keys. The

security module may improve the security services for applications requiring

browser connection, and allows you to use a digital signature. The certificates are

saved in the security module by the service provider.

Press Menu and select Services, Settings, Security settings and Security module

settings. Select

•

Security module details to show the security module title, its status,

manufacturer and serial number.

Module PIN request to set the phone to ask for the module PIN when using

services provided by security module. Key in the code and select On. To disable

the module PIN request, select Off.

•

Change module PIN to change the module PIN, if allowed by the security

module. Enter the current module PIN code, then enter the new code twice.

Change signing PIN. Select the signing PIN you want to change. Enter the

current PIN code, then enter the new code twice.

See also General information on page 14.

Certificates

There are three kinds of certificates: server certificates, authority certificates and

user certificates.

• The phone uses a server certificate to improve security in connection between

the phone and the gateway. The phone receives the server certificate from the

130

service provider before the connection is established and its validity is checked

using the authority certificates saved in the phone. Server certificates are not

saved.

The security indicator

is displayed during a connection, if the data

transmission between the phone and the gateway (identified by the IP address

in the Edit active service settings - Bearer settings) is encrypted.

• Authority certificates are used by some services, such as banking services, for

checking the validity of other certificates. Authority certificates can either be

saved in the security module by the service provider, or they can be

downloaded from the network, if the service supports the use of authority

certificates.

• User certificates are issued to users by a Certifying Authority. User certificates

are required, for example, to make a digital signature and they associate the

user with a specific private key in a security module.

The security icon does not indicate that the data transmission between the gateway and the

content server (or place where the requested resource is stored) is secure. The service

provider secures the data transmission between the gateway and the content server.

Important: Note that even if the use of certificates makes the risks involved in

remote connections and software installation considerably smaller, they must be

used correctly in order to benefit from increased security. The existence of a

certificate does not offer any protection by itself; the certificate manager must contain

correct, authentic, or trusted certificates for increased security to be available. Certificates

have a restricted lifetime. If Expired certificate or Certificate not valid yet is shown even if

the certificate should be valid, check that the current date and time in your device are

correct.

131

Before changing any certificate settings, you must make sure that you really trust the owner

of the certificate and that the certificate really belongs to the listed owner.

Digital signature

You can make digital signatures with your phone. This feature requires support

from your SIM card. The signature can be traced back to you via the private key on

the security module and the user certificate that was used to perform the

signature. Using the digital signature can be the same as signing your name to a

paper bill, contract or other document.

To make a digital signature, select a link on a page, for example, the title of the

book you want to buy and its price. The text to sign (possibly including amount,

date, etc.) will be shown.

Check that the header text is Read and that the digital signature icon

shown.

Note: If the digital signature icon does not appear, there is a security

breach, and you should not enter any personal data such as your signing

PIN.

To sign the text, read all of the text first and then you can select Sign.

Note: The text may not fit within a single screen. Therefore, make sure to

scroll through and read all of the text before signing.

Select the user certificate you want to use. Key in the signing PIN (see

General information on page 14) and press OK. The digital signature icon will

disappear, and the service may display a confirmation of your purchase.

132

■ Go to (Menu 15)

To access some specific functions quickly, press Menu and

selectGo to and select the desired function from the list.

If there are no functions on the list, press Add, scroll to the function that you want

to add to the list and press Mark.

To remove or add more functions on the list, see Personal shortcuts on page 80.

■ SIM services (Menu 16)

In addition to the functions available on the phone, your SIM

card may provide additional services that you can access in

Menu 16. Menu 16 is shown only if it is supported by your SIM card. The name and

contents of the menu depend entirely on the service available.

You can set the phone to show you the confirmation messages sent between your

phone and the network when you are using the SIM services by selecting the

option Yes within the menu Confirm SIM service actions in Phone settings.

Note that accessing these services may involve sending a text message (SMS) or

making a phone call for which you may be charged.

133

7. PC Connectivity

You can send and receive e-mails, and access the Internet when your phone is

connected to a compatible PC via an IR connection or a data cable. You can use

your phone with a variety of PC connectivity and data communications

applications. With PC Suite you can, for example, send text messages, synchronise

contacts, calendar and to-do notes between your phone and the compatible PC

You may find more information and downloadable files on the Nokia website,

http://www.nokia.com/pcsuite.

■ PC Suite

The PC Suite contains the following applications:

• Nokia Application Installer to install Java applications from the compatible

PC to the phone.

• Nokia Image Converter to make images in supported formats usable for

multimedia messages or wallpaper and to transfer them to your phone.

• Nokia Sound Converter to optimise MIDI sounds to be compatible with your

phone and to transfer them to your phone.

• Nokia Content Copier to back up and restore personal data between your

phone and PC. You can also transfer content between multiple Nokia phones.

• Nokia Phone Editor to send text messages and to edit the contacts and

message settings of your phone.

134

• Nokia Phone Browser to view the contents of the Gallery folder of your phone

on a compatible PC. You can browse picture and audio files and also modify

files in the phone’s memory and transfer files between the phone and the PC.

• Nokia PC Sync to synchronise contacts, calendar and to-do notes between

your phone and a compatible PC.

• Nokia Multimedia Player plays the multimedia messages you receive via e-

mail and audio, image, and video files. You can also create playlists of your

favourite multimedia files.

• Nokia 6610i data modem drivers enable you to use your phone as a modem.

• Nokia Modem Options contains settings for HSCSD and GPRS connections.

• Nokia Connection Manager to select the connection type between the PC and

the phone.

from being copied, modified, transferred or forwarded.

GPRS, HSCSD and CSD

With your phone you can use GPRS (General Packet Radio Service), HSCSD (High

Speed Circuit Switched Data) and CSD (Circuit Switched Data, GSM data) data

services.

For availability and subscription to data services, contact your network operator

or service provider.

135

Note that the use of the HSCSD service consumes the phone’s battery faster than

normal voice or data calls. You may need to connect the phone to a charger for

the duration of data transfer.

See GPRS modem settings on page 120.

■ Using data communication applications

For information on using a data communication application, refer to the

documentation provided with it.

Note that making or answering phone calls during a computer connection is not

recommended as it might disrupt the operation.

For better performance during data calls, place the phone on a stationary surface

with the keypad facing downward. Do not move the phone or hold it in your hand

during a data call.

136

8. Battery information

■ Charging and Discharging

Your device is powered by a rechargeable battery. The full performance of a new battery is

achieved only after two or three complete charge and discharge cycles. The battery can be

charged and discharged hundreds of times but it will eventually wear out. When the talk and

standby times are noticeably shorter than normal, buy a new battery. Use only Nokia

approved batteries, and recharge your battery only with Nokia approved chargers

designated for this device.

Unplug the charger from the electrical plug and the device when not in use. Do not leave the

battery connected to a charger. Overcharging may shorten its lifetime. If left unused, a fully

charged battery will lose its charge over time. Temperature extremes can affect the ability of

your battery to charge.

To prolong battery life of NiMh batteries, discharge the battery from time to time by leaving

your device switched on until it turns itself off. Do not attempt to discharge the battery by

any other means.

Use the battery only for its intended purpose. Never use any charger or battery that is

damaged.

Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic

object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-

) terminals of the battery. (These look like metal strips on the battery.) This might happen, for

example, when you carry a spare battery in your pocket or purse. Short-circuiting the

terminals may damage the battery or the connecting object.

137

Leaving the battery in hot or cold places, such as in a closed car in summer or winter

conditions, will reduce the capacity and lifetime of the battery. Always try to keep the

battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not

work temporarily, even when the battery is fully charged. Battery performance is particularly

limited in temperatures well below freezing.

Do not dispose of batteries in a fire! Dispose of batteries according to local regulations.

Please recycle when possible. Do not dispose as household waste.

138

CARE AND MAINTENANCE

Your device is a product of superior design and craftsmanship and should be treated with

care. The suggestions below will help you protect your warranty coverage.

•

Keep the device dry. Precipitation, humidity and all types of liquids or moisture can

contain minerals that will corrode electronic circuits. If your device does get wet, remove

the battery and allow the device to dry completely before replacing it.

•

Do not use or store the device in dusty, dirty areas. Its moving parts and electronic

components can be damaged.

Do not store the device in hot areas. High temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain plastics.

Do not store the device in cold areas. When the device returns to its normal temperature,

moisture can form inside the device and damage electronic circuit boards.

•

Do not attempt to open the device other than as instructed in this guide.

Do not drop, knock, or shake the device. Rough handling can break internal circuit boards

and fine mechanics.

•

Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.

Do not paint the device. Paint can clog the moving parts and prevent proper operation.

Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity sensor, and

light sensor lenses).

•

Use only the supplied or an approved replacement antenna. Unauthorised antennas,

modifications, or attachments could damage the device and may violate regulations

governing radio devices.

139

All of the above suggestions apply equally to your device, battery, charger, or any

enhancement. If any device is not working properly, take it to the nearest authorized service

facility for service.

140

ADDITIONAL SAFETY INFORMATION

■ Operating environment

Remember to follow any special regulations in force in any area and always switch off your

device when its use is prohibited or when it may cause interference or danger. Use the device

only in its normal operating positions. To maintain compliance with radio frequency

exposure guidelines only use enhancements approved by Nokia for use with this device.

When the device is on and being worn on the body, always use an approved holder or

carrying case.

Parts of the device are magnetic. Metallic materials may be attracted to the device, and

persons with a hearing aid should not hold the device to the ear with the hearing aid. Always

secure the device in its holder, because metallic materials may be attracted by the earpiece.

Do not place credit cards or other magnetic storage media near the device, because

information stored on them may be erased.

■ Medical devices

Operation of any radio transmitting equipment, including wireless phones, may interfere

with the functionality of inadequately protected medical devices. Consult a physician or the

manufacturer of the medical device to determine if they are adequately shielded from

external RF energy or if you have any questions. Switch off your device in health care

facilities when any regulations posted in these areas instruct you to do so. Hospitals or

health care facilities may be using equipment that could be sensitive to external RF energy.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of 6 in. (15.3 cm) be

maintained between a wireless phone and a pacemaker to avoid potential interference with

141

the pacemaker. These recommendations are consistent with the independent research by

and recommendations of Wireless Technology Research. Persons with pacemakers should:

•

always keep the device more than 6 in. (15.3 cm) from their pacemaker when the device

is switched on;

•

not carry the device in a breast pocket; and

hold the device to the ear opposite the pacemaker to minimise the potential for

interference.

If you have any reason to suspect that interference is taking place, switch off your device

immediately.

Hearing aids

Some digital wireless devices may interfere with some hearing aids. If interference occurs,

consult your service provider.

■ Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in

motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock)

braking systems, electronic speed control systems, air bag systems. For more information,

check with the manufacturer or its representative of your vehicle or any equipment that has

been added.

Only qualified personnel should service the device, or install the device in a vehicle. Faulty

installation or service may be dangerous and may invalidate any warranty that may apply to

the device. Check regularly that all wireless device equipment in your vehicle is mounted

and operating properly. Do not store or carry flammable liquids, gases, or explosive materials

in the same compartment as the device, its parts, or enhancements. For vehicles equipped

with an air bag, remember that air bags inflate with great force. Do not place objects,

including installed or portable wireless equipment in the area over the air bag or in the air

142

bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag

inflates, serious injury could result.

Using your device while flying in aircraft is prohibited. Switch off your device before

boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the

operation of the aircraft, disrupt the wireless telephone network, and may be illegal.

■ Potentially explosive environments

Switch off your device when in any area with a potentially explosive atmosphere and obey

all signs and instructions. Potentially explosive atmospheres include areas where you would

normally be advised to turn off your vehicle engine. Sparks in such areas could cause an

explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling

points such as near gas pumps at service stations. Observe restrictions on the use of radio

equipment in fuel depots, storage, and distribution areas, chemical plants or where blasting

operations are in progress. Areas with a potentially explosive atmosphere are often but not

always clearly marked. They include below deck on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas

where the air contains chemicals or particles such as grain, dust or metal powders.

■ Emergency calls

Important:

Wireless phones, including this device, operate using radio signals, wireless

networks, landline networks, and user-programmed functions. Because of this,

connections in all conditions cannot be guaranteed. You should never rely solely on

any wireless device for essential communications like medical emergencies.

To make an emergency call:

1. If the device is not on, switch it on. Check for adequate signal strength.

143

Some networks may require that a valid SIM card is properly inserted in the device.

2. Press

as many times as needed to clear the display and ready the device for calls.

3. Key in the official emergency number for your present location. Emergency numbers vary

by location.

4. Press the

key.

If certain features are in use, you may first need to turn those features off before you can

make an emergency call. If the device is in offline or flight mode you must change the profile

to activate the phone function before you can make an emergency call. Consult this guide or

your service provider for more information.

When making an emergency call, give all the necessary information as accurately as

possible. Your wireless device may be the only means of communication at the scene of an

accident. Do not end the call until given permission to do so.

■ Certification information (SAR)

THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES

Your mobile device is a radio transmitter and receiver. It is designed and manufactured not

to exceed the limits for exposure to radio frequency (RF) recommended by international

guidelines (ICNIRP). These limits are part of comprehensive guidelines and establish

permitted levels of RF energy for the general population. The guidelines were developed by

independent scientific organisations through periodic and thorough evaluation of scientific

studies. The guidelines include a substantial safety margin designed to assure the safety of

all persons, regardless of age and health.

The exposure standard for mobile devices employs a unit of measurement known as the

Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is 2.0

W/kg*. Tests for SAR are conducted using standard operating positions with the device

transmitting at its highest certified power level in all tested frequency bands. Although the

144

SAR is determined at the highest certified power level, the actual SAR of the device while

operating can be well below the maximum value. This is because the device is designed to

operate at multiple power levels so as to use only the power required to reach the network.

In general, the closer you are to a base station, the lower the power output of the device.

The highest SAR value for this device when tested for use at the ear is 0.73 W/kg.

This device meets RF exposure guidelines when used either in the normal use position

against the ear or when positioned at least 2.2 cmaway from the body. When a carry case,

belt clip or holder is used for body-worn operation, it should not contain metal and should

position the product at least 2.2 cmaway from your body.

In order to transmit data files or messages, this device requires a quality connection to the

network. In some cases, transmission of data files or messages may be delayed until such a

connection is available. Ensure the above separation distance instructions are followed until

the transmission is completed.

* The SAR limit for mobile devices used by the public is 2.0 watts/kilogram (W/kg) averaged

over ten grams of body tissue. The guidelines incorporate a substantial margin of safety to

give additional protection for the public and to account for any variations in measurements.

SAR values may vary depending on national reporting requirements and the network band.

For SAR information in other regions please look under product information at

www.nokia.com.

145

Transcend Information Memory Stick Pro MS Pro User Manual
Sprint Nextel Cell Phone ACE User Manual
Sony Ericsson P1 User Manual
Seagate SAVVIO 15K2 SAS ST9146652SS User Manual
Sanus Systems VISIONMOUNT VMCA9 User Manual
Samsung SGH T101G User Manual
Samsung GH68 08691A User Manual
Samsung Computer Drive HX M750UAB User Manual
Panasonic CQ C7300N User Manual
Optimus CR 317 User Manual