Nokia 6250 User Manual

Electronic user’s guide released subject to "Nokia User’s Guides Terms and Conditions, 7th June, 1998"

User guide

9352583

Issue 2

Quick guide

These pages give you some tips for using your Nokia 6250 phone. For more detailed information, read

through the user guide.

I Making your first call

Before you can make your first call, see ’Getting started’ on page 27 to learn how to

• insert the SIM card,

• install and charge the battery,

• switch on your phone.

1. Key in the area code and phone number and press

2. Press to end the call.

I Call functions

Answering a call

• Press

• Press Options if you want to mute the ringing tone before

answering a call. Then select Answer from the selection list or press

to answer the silent call.

Ending / rejecting a call

Press

or press Reject.

Adjusting the earpiece volume

• Press the volume keys on the left side of the phone.

• Automatic volume control (AVC) can be activated through

Menu 4-1-1. See page 77.

Last number redial

Press

in the standby mode to access the list of last dialled numbers. Scroll

with

or to the desired number and press

Calling your voice mailbox

Press and hold . If the phone asks for the voice mailbox number, key it in and press OK.

Calling by using a voice tag

First, you need to add a voice tag to a name, see ’Voice dialling’ on page 50. Then press and hold

Names and say the name to make a call.

I Phone book functions

Quick save

Key in the phone number, press Options and select Save from the list. Key in the name and press

OK.

Quick find

In the standby mode, press

, key in the first letter of the name, scroll with

to the

desired name.

I Basic menu functions

Entering a menu

Press Menu, scroll with

to the desired menu function and press Select.

Exiting a menu

Press

to exit a menu function without changing its settings and return to standby mode.

I Keypad lock functions

Locking the keypad

Press Menu, then

(within 2 seconds).

Unlocking the keypad

Press Unlock and then

quickly.

Automatic keylock and keylock code

You can also set time delay to lock your keypad automatically and lock/unlock the keypad with a

code, see page 81 for details.

Contents

Quick guide........................................................................................................................................ 3

Contents............................................................................................................................................. 6

For your safety................................................................................................................................. 15

General information........................................................................................................................ 17

Stickers in the sales package ....................................................................................................................................................... 17

Security code .................................................................................................................................................................................... 17

Network services.............................................................................................................................................................................. 17

Accessories ....................................................................................................................................................................................... 18

Typographics used in this guide.................................................................................................................................................. 19

1. Your phone.................................................................................................................................. 20

Using your phone in wet and damp conditions...................................................................................................................... 20

Special features................................................................................................................................................................................ 21

Keys of your phone.......................................................................................................................................................................... 22

The selection keys ........................................................................................................................................................................ 23

The display indicators.................................................................................................................................................................... 24

Standby mode ............................................................................................................................................................................... 24

List of indicators in the standby mode .................................................................................................................................. 25

2. Getting started ........................................................................................................................... 27

Installing the SIM card and the battery .................................................................................................................................. 27

Charging the battery ...................................................................................................................................................................... 30

Switching the phone on and off ................................................................................................................................................. 31

If the phone asks for a PIN code: ............................................................................................................................................ 31

If the phone asks for a security code: .................................................................................................................................... 31

3. Call functions ............................................................................................................................. 33

Making a call..................................................................................................................................................................................... 33

International calls ........................................................................................................................................................................ 33

Making a call using the phone book....................................................................................................................................... 33

Last number redial........................................................................................................................................................................ 34

Making a call by saying a voice tag........................................................................................................................................ 34

Speed dialling a phone number................................................................................................................................................ 34

Calling your voice mailbox......................................................................................................................................................... 35

Adjusting the earpiece volume................................................................................................................................................. 35

Answering a call............................................................................................................................................................................... 35

Muting the ringing tone ............................................................................................................................................................ 35

Rejecting a call.............................................................................................................................................................................. 36

In-call options................................................................................................................................................................................... 36

Call waiting.................................................................................................................................................................................... 37

Call holding.................................................................................................................................................................................... 37

Making a conference call........................................................................................................................................................... 38

4. Phone book ................................................................................................................................. 39

Phone book basics............................................................................................................................................................................ 39

Selecting the phone book ......................................................................................................................................................... 39

Copying phone books .................................................................................................................................................................. 40

Entering the phone book............................................................................................................................................................ 40

Storing names and numbers...................................................................................................................................................... 41

Recalling a name and phone number..................................................................................................................................... 42

Organising the phone book........................................................................................................................................................ 43

Editing a name and number................................................................................................................................................... 43

Erasing a name and number.................................................................................................................................................. 43

Further phone book functions...................................................................................................................................................... 44

Assigning a phone number to a speed dial key................................................................................................................... 44

Caller groups.................................................................................................................................................................................. 44

Adding a name and phone number in a caller group..................................................................................................... 44

Setting a ringing tone and graphic for a caller group and renaming a caller group............................................ 45

Removing a name and number from a caller group....................................................................................................... 46

Copying via infrared................................................................................................................................................................... 46

Copying a name and number from your phone............................................................................................................... 46

Copying a name and phone number to your phone....................................................................................................... 46

Sending and receiving names and phone numbers............................................................................................................ 47

Storing multiple numbers and text items per name ......................................................................................................... 47

Adding a new number or text item to a name: ............................................................................................................... 48

To change the default number: ............................................................................................................................................ 49

Setting the type of view for stored names and numbers.............................................................................................. 49

Service numbers ........................................................................................................................................................................... 49

Memory status.............................................................................................................................................................................. 50

Voice dialling .................................................................................................................................................................................... 50

Adding a voice tag to a phone number................................................................................................................................. 51

Making a call by using a voice tag ......................................................................................................................................... 52

Replaying, erasing or changing a voice tag.......................................................................................................................... 52

5. Using the Menu.......................................................................................................................... 54

Accessing a menu function by scrolling ................................................................................................................................... 54

Accessing a menu function by using its shortcut number .................................................................................................. 55

List of menu functions................................................................................................................................................................... 56

6. Menu functions.......................................................................................................................... 59

Messages (Menu 1)......................................................................................................................................................................... 59

Writing and sending text messages........................................................................................................................................ 59

Predictive text input................................................................................................................................................................ 60

Standard answers and templates......................................................................................................................................... 63

Inserting pictures ...................................................................................................................................................................... 63

Reading and viewing text and picture messages................................................................................................................ 64

Replying to a message............................................................................................................................................................. 65

Special sending options.............................................................................................................................................................. 66

Sending a text message to multiple recipients................................................................................................................ 66

Sending a text message by message profile...................................................................................................................... 67

Organising your messages.......................................................................................................................................................... 67

Inbox and Outbox folders ....................................................................................................................................................... 67

Archive folder and user-specified folders.......................................................................................................................... 68

Message settings .......................................................................................................................................................................... 69

Settings common to all text messages............................................................................................................................... 69

Setting for Message profiles.................................................................................................................................................. 70

Call register (Menu 2)..................................................................................................................................................................... 71

Missed calls (Menu 2-1)............................................................................................................................................................. 72

Received calls (Menu 2-2) ......................................................................................................................................................... 72

Dialled numbers (Menu 2-3)..................................................................................................................................................... 72

Erase recent call lists (Menu 2-4)............................................................................................................................................ 72

Call duration (Menu 2-5)........................................................................................................................................................... 73

Call costs (Menu 2-6).................................................................................................................................................................. 73

Profiles (Menu 3) ............................................................................................................................................................................ 74

Activating a user profile............................................................................................................................................................. 74

Customising Profiles.................................................................................................................................................................... 75

Settings you can personalise................................................................................................................................................. 75

Renaming profiles......................................................................................................................................................................... 76

Settings (Menu 4) ............................................................................................................................................................................ 77

Call settings (Menu 4-1) ............................................................................................................................................................ 77

Automatic volume control (Menu 4-1-1).......................................................................................................................... 77

Anykey answer (Menu 4-1-2)................................................................................................................................................ 78

Automatic redial (Menu 4-1-3)............................................................................................................................................ 78

Speed dialling (Menu 4-1-4)................................................................................................................................................. 78

Call waiting service (Menu 4-1-5) ...................................................................................................................................... 78

Line for outgoing calls (Menu 4-1-6)................................................................................................................................. 79

Summary after call (Menu 4-1-7) ....................................................................................................................................... 79

Fax or data call (Menu 4-1-8).............................................................................................................................................. 79

Own number sending (Menu 4-1-9)................................................................................................................................... 79

Phone settings (Menu 4-2) ....................................................................................................................................................... 80

Language (Menu 4-2-1) ......................................................................................................................................................... 80

Cell info display (Menu 4-2-2)............................................................................................................................................. 80

Welcome note (Menu 4-2-3)................................................................................................................................................ 80

Network selection (Menu 4-2-4)......................................................................................................................................... 80

Display contrast (Menu 4-2-5)............................................................................................................................................. 81

Confirm SIM service actions (Menu 4-2-6)...................................................................................................................... 81

Keylock settings (Menu 4-3)..................................................................................................................................................... 81

Automatic keylock (Menu 4-3-1) ........................................................................................................................................ 81

Keylock code (Menu 4-3-2)................................................................................................................................................... 82

Change keylock code (Menu 4-3-3).................................................................................................................................... 82

Communication settings (Menu 4-4)..................................................................................................................................... 83

Info service (Menu 4-4-1)...................................................................................................................................................... 83

Listen to voice messages (Menu 4-4-2)............................................................................................................................. 83

Voice mailbox number (Menu 4-4-3)................................................................................................................................. 84

Service command editor (Menu 4-4-4) ............................................................................................................................. 84

Security settings (Menu 4-5).................................................................................................................................................... 84

PIN code request (Menu 4-5-1)........................................................................................................................................... 84

Call barring service (Menu 4-5-2)....................................................................................................................................... 85

Fixed dialling (Menu 4-5-3).................................................................................................................................................. 85

Closed user group (Menu 4-5-4).......................................................................................................................................... 86

Security level (Menu 4-5-5).................................................................................................................................................. 86

Change of access codes (Menu 4-5-6)............................................................................................................................... 87

Restore factory settings (Menu 4-6)................................................................................................................................... 87

Call divert (Menu 5) ........................................................................................................................................................................ 87

Games (Menu 6)............................................................................................................................................................................... 88

To start a new game.................................................................................................................................................................... 89

To start a 2-player game............................................................................................................................................................ 89

Game options................................................................................................................................................................................. 89

Calculator (Menu 7) ........................................................................................................................................................................ 90

Using the calculator..................................................................................................................................................................... 90

Currency conversion .................................................................................................................................................................... 91

Setting the exchange rate in Calculator............................................................................................................................ 91

Calendar (Menu 8)........................................................................................................................................................................... 92

Calendar views .............................................................................................................................................................................. 92

Day view ...................................................................................................................................................................................... 92

Note view .................................................................................................................................................................................... 92

Week list...................................................................................................................................................................................... 92

Options list of calendar views................................................................................................................................................... 93

Adding a calendar note............................................................................................................................................................... 93

When the phone alarms for a note...................................................................................................................................... 94

Task journal (Menu 9)..................................................................................................................................................................... 94

Restart (Menu 9-1) ...................................................................................................................................................................... 95

Add new (Menu 9-2) ................................................................................................................................................................... 95

Find (Menu 9-3)............................................................................................................................................................................ 96

Edit (Menu 9-4)............................................................................................................................................................................. 96

Erase (Menu 9-5).......................................................................................................................................................................... 96

History (Menu 9-6) ...................................................................................................................................................................... 97

Details........................................................................................................................................................................................... 98

Send as SMS............................................................................................................................................................................... 99

Transferring Task journal data to a PC using a cable......................................................................................................... 99

Transferring Task journal data to a compatible PC via infrared................................................................................ 100

Active work view........................................................................................................................................................................ 100

Pause task................................................................................................................................................................................. 100

Stop task ................................................................................................................................................................................... 101

Add cost..................................................................................................................................................................................... 101

Add comment........................................................................................................................................................................... 102

Clock (Menu 10) ........................................................................................................................................................................... 103

Stopwatch (Menu 10-1)........................................................................................................................................................... 103

Split timing............................................................................................................................................................................... 104

Lap timing................................................................................................................................................................................. 105

Saving or resetting times ..................................................................................................................................................... 105

Viewing times .......................................................................................................................................................................... 105

Deleting times.......................................................................................................................................................................... 106

Stopwatch memory................................................................................................................................................................ 106

Alarm clock (Menu 10-2)......................................................................................................................................................... 106

Time settings (Menu 10-3)...................................................................................................................................................... 107

Show clock / Hide clock (Menu 10-3-1).......................................................................................................................... 107

Set the time (Menu 10-3-2)................................................................................................................................................ 107

Time format (Menu 10-3-3)................................................................................................................................................ 108

Sound meter (Menu 11) ............................................................................................................................................................. 108

Infrared (Menu 12)........................................................................................................................................................................ 109

To send and receive data via IR ............................................................................................................................................. 110

Checking the status of an IR connection............................................................................................................................ 110

Mobile Internet Services (WAP) .............................................................................................................................................. 111

Setting up the phone for the WAP services ....................................................................................................................... 111

Saving the settings received as a text message ............................................................................................................ 112

Keying in the settings manually......................................................................................................................................... 112

Editing the settings................................................................................................................................................................ 113

Accessing WAP pages ............................................................................................................................................................... 114

Activating a connection set................................................................................................................................................. 114

Accessing a WAP page by opening the homepage........................................................................................................ 115

Bookmarks................................................................................................................................................................................. 115

Accessing a WAP page by entering its address.............................................................................................................. 116

Viewing WAP pages................................................................................................................................................................... 116

Keys used in WAP navigation.............................................................................................................................................. 116

Emptying the cache ................................................................................................................................................................... 117

Security certificates................................................................................................................................................................... 118

SIM services (Menu 14)................................................................................................................................................................ 119

7. Data and fax communications ................................................................................................ 120

Connecting your phone to a computer.................................................................................................................................... 120

Installing communications applications and modem drivers ........................................................................................ 120

Using communications applications..................................................................................................................................... 120

8. Reference information ............................................................................................................. 122

Access codes.................................................................................................................................................................................... 122

Security code (5 digits)............................................................................................................................................................. 122

PIN code (4 to 8 digits)............................................................................................................................................................. 122

PIN2 code (4 to 8 digits) .......................................................................................................................................................... 122

PUK code (8 digits)..................................................................................................................................................................... 123

PUK2 code (8 digit).................................................................................................................................................................... 123

Keylock code (4 digit)................................................................................................................................................................ 123

Barring password........................................................................................................................................................................ 123

Battery information....................................................................................................................................................................... 123

Charging and discharging the battery.................................................................................................................................. 123

Using the batteries ................................................................................................................................................................. 124

Care and maintenance................................................................................................................... 126

Important safety information....................................................................................................... 127

Technical specifications................................................................................................................. 131

For your safety

Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed

information is given in this manual.

ROAD SAFETY COMES FIRST

Don’t use a hand-held phone while driving; park the vehicle first.

INTERFERENCE

All wireless phones may get interference which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any regulations or rules. Switch phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Wireless phones can cause interference. Using them on aircraft is illegal.

SWITCH OFF WHEN REFUELING

Don’t use phone at a refuelling point. Don’t use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Don’t use phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.

USE SENSIBLY

Use only in normal position (to ear). Don’t touch the antenna area unnecessarily.

USE QUALIFIED SERVICE

Only qualified service personnel must install or repair equipment.

ACCESSORIES AND BATTERIES

Use only approved accessories and batteries. Do not connect incompatible products.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety instructions. Do not

connect incompatible products. Remember to make backup copies of all important data.

MAKING CALLS

Ensure the phone is switched on and in service. Enter the phone number, including the area code, then

press

. To end a call press

. To answer a call press

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press

as many times as needed (e.g. to exit a call,

to exit a menu, etc.) to clear the display. Enter the emergency number, then press

location. Do not end the call until told to do so.

. Give your

INFRARED PRECAUTIONS

Do not point the IR beam at anyones’s eyes or allow it to interfere with other IR devices.

General information

This chapter gives you some general information on your new Nokia phone and this user guide.

I Stickers in the sales package

The stickers contain important information for service and customer support purposes.

Attach the

sticker with the text “ITEM” and “IMEI” on page 2 of this user guide.

sticker to the Club Nokia Invitation Card supplied in the sales package.

I Security code

The factory setting for the security code is 12345. To avoid unauthorised use of your phone, change the

code in the Settings / Security settings/ Security level (Menu 4-5-5) and Change of access codes

(Menu 4-5-6). Keep the new code secret and in a safe place which is separate from your phone.

I Network services

The wireless phone described in this user guide is approved for use on the EGSM900, GSM1800 and

GSM900/1800 dual-band networks.

Note that Dual band functionality is a network-dependent feature. Check with your local service

provider if you can subscribe to and use the dual band functionality.

A number of features included in this user guide are called network services. They are special services

provided by wireless service providers. Before you can take advantage of any of these network services,

you must subscribe to these service(s) from your home service provider and obtain instructions for

their use.

I Accessories

Li-Ion battery BLL-2 is the manufacturer-approved rechargeable battery available for your phone.

This apparatus is intended for use when supplied with power from

ACP-7, ACP-8, and LCH-9 battery chargers. Other usage will invalidate any approval given to this

apparatus and may be dangerous.

Warning! Use only batteries, chargers and accessories approved by the phone

manufacturer for use with this particular phone model. The use of any other types will

invalidate any approval or warranty applying to the phone, and may be dangerous.

For availability of approved accessories, please check with your dealer.

When you disconnect the power cord of any accessory, grasp and pull the plug, not the

cord.

Please note that the accessories to be used with the Nokia 6250 do not meet the same

durability or water resistance specifications as the phone itself. For example, all the

chargers are only to be used in dry conditions - NEVER when wet or damp.

WALL MOUNTING OF THE WALL/DESK STAND

Wall/Desk Stand DCV-6 is a Nokia 6250 specific accessory. It has a wall mounting option for charging

your Nokia 6250 phone with Nokia chargers ACP-8 or ACP-7. The picture series below shows how the

stand should be mounted on a wall.

Note: The availability of particular products may vary by the region. Please check with the Nokia dealer

nearest you.

I Typographics used in this guide

The display texts which appear on the phone’s display are indicated in italic typeface, for example

Calling.

The display texts related to the selection keys are indicated in bold

typeface, for example Menu. Only the selection key texts without the key symbols are shown in the

text.

In this user guide all key presses are represented by icons such as

and

1. Your phone

The Nokia 6250 is a durable quality phone.

Its advanced mechanical solutions make it dust and water resistant; it can withstand temporary

immersion in water without harmful effects.

It can take a considerable drop onto a hard surface. However, even though the phone is designed to

meet your tough demands, it is not meant to be thrown around on purpose. It is a high-tech piece of

equipment and should be treated as such. Repeated droppings may, over time, deteriorate the

performance of your phone.

The speaker, buzzer and microphone are sealed so as to be dust and water resistant. Therefore never

use any sharp tools that can damage their coating.

Even though the car antenna connector is made durable and water-resistant, keep the rubber cap

(provided with the phone) in place when not using the active car kit to minimize the risk of any small

items and /or humidity entering the connector and possibly deteriorating the performance and /or

water resistance of the phone.

I Using your phone in wet and damp conditions

• Never try to use the phone under water.

• You can use this phone in the rain, but do not take it with you when you go e.g. swimming.

• If the phone, and especially the system connector, has been exposed to salt water, immediate

rinsing with freshwater is recommended to avoid corrosion. The phone must be wiped dry carefully

after it has been rinsed.

• Before opening the back cover, the phone must be wiped dry to avoid water entering the interior of

your phone. The SIM card and battery are not water resistant.

• Always remember that the accessories do not meet the same durability or water resistance

specifications as the phone itself.

• Never charge the phone when the bottom connector is wet or damp.

• Never use a damp phone with accessories that have an electrical functionality (e.g. Wall/Desk

Stand, Advanced HF Car Kit, etc.).

I Special features

Your phone has many new features to meet your needs in tough environments and elsewhere.

• With the Task journal (Menu 9) you can for example keep track of working times and costs.

• Stopwatch (Menu 10-1) enables the taking of intermediate times and lap times.

• Sound meter (Menu 11) reveals the estimated noise level of your surroundings.

• Automatic volume control can be selected on or off with

Menu 4-1-1.

• Keypad can be locked automatically and with a code, see page 81.

• Display contrast (Menu 4-2-5) offers a selection of ten different contrast levels for the display.

• Currencies can be converted in the standby mode if you have set the exchange rate in Calculator

(Menu 7).

• Timed profiles allow you to turn a profile on for a certain period of time, see page 74.

• The Quick silent feature mutes the ringing tone of an incoming call immediately. The silent call can

be answered as usual, see page 35.

I Keys of your phone

Selection keys

These keys perform the function indicated by the text immedi-

ately above them, e.g. Select or OK.

Scroll keys Use these keys to scroll through names, phone

numbers, menus or setting options or to get quick access to

the phone book.

Dials a phone number and answers a call. Sends the ongoing

call to Hold if pressed during a call. In the standby mode:

shows the list of the most recently dialled numbers.

Ends or rejects a call. Also exits from any function at any time.

Enter numbers and characters.

Pressing and holding of

calls your voice mailbox.

Used for various purposes in

different functions.

Power key (1)

Pressing the power key switches the phone on or off.

Pressing this key briefly while in the standby mode or during a

call: enters the list of profiles.

Pressing the key briefly while in the phone book or menu func-

tions: turns the display lights on for 15 seconds.

Volume keys (2)

The upper key increases and the lower key decreases the ear-

piece volume.

The selection keys

Below the display you will find two selection keys:

The functions of these keys depend on the guiding texts shown above the keys. For example, when the

text Menu appears above the key, pressing this key enters the menu functions.

Similarly, pressing the key under the text Names allows access to the phone book functions.

Pressing and holding Names activates voice dialling.

In this user guide, the selection keys are indicated by the relevant guiding text in bold type.

I The display indicators

Display indicators and icons inform you about the operation of your phone.

Standby mode

The indicators described below are shown when the phone is ready for use, with no characters entered

by the user. This screen is called standby mode.

The Nokia 6250 has 7-bar battery and signal status indicators

xxxxxx

Indicates in which cellular network the phone is currently used.

Shows the signal strength of the cellular network at your current location. The higher the bar,

the stronger the signal.

Shows the battery charge level. The higher the bar, the more power in the battery.

List of indicators in the standby mode

The following icons may also be shown when the phone is in the standby mode:

Indicates that you have received one or several text or picture messages. See ’Messages (Menu

1)’ on page 59.

Indicates that you have received one or several voice messages.

Indicates that the phone does not ring at an incoming call. See ’Settings you can personalise’

on page 75.

Indicates that the phone’s keypad is locked. See ’Keylock settings (Menu 4-3)’ on page 81.

Indicates that you have set the alarm clock . See ’Alarm clock (Menu 10-2)’ on page 106.

Indicates that you have activated one or more call diverts. See ’Call divert (Menu 5)’ on page

87.

Indicates that your calls are limited to a closed user group (network service). See ’Closed user

group (Menu 4-5-4)’ on page 86.

Indicates that a task in the Task journal is still active. See ’Task journal (Menu 9)’ on page 94.

Indicates that you have stopwatch timing going on in the background. See ’Stopwatch (Menu

10-1)’ on page 103.

Indicates that a profile is timed, see ’Profiles (Menu 3)’ on page 74.

2. Getting started

I Installing the SIM card and the battery

• Keep all miniature SIM cards out of the reach of small children.

• The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when

handling, inserting or removing the card.

• Before installing the SIM card, always make sure that the phone is dry and switched off and only

then remove the back cover.

1. With the back of the phone facing you, open the screw by pressing it

lightly and turning it 90 degrees to the left.

2. Remove the water resistant back cover by lifting it up.

3. Remove the BLL-2 battery if there is one.

Note: When removing the back cover and battery, do not tamper with

the other screws or the cover seals. If you do, you may invalidate the

warranty.

4. Open the SIM card holder by pressing the middle wires from sides

lightly and by releasing the card holder from its place.

5. Insert your SIM card ensuring that the bevelled corner is on the

bottom right and the golden contact area is facing downwards.

6. When SIM card is inserted, close the card holder

downwards and press the wires from sides again to lock

the card holder into the slots.

7. Replace the battery.

Note: Ensure you place the battery so that the electric contacts

of the battery and the phone touch one another.

Make sure the interior of your phone and the back cover seals are

dry and clean, and free of any foreign objects. Foreign objects

may damage the seals against water.

Never detach the cover seals.

8. Attach the back cover and close it tightly by turning the screw 90

degrees to the right.

I Charging the battery

Note: Never charge the phone when the bottom connector or

phone itself is wet or damp! The charger should always be dry.

1. Attach the lead from the charger to the socket (A) on the bottom

of your phone.

2. Connect the charger to an AC wall outlet or use the Nokia car

accessories compatible with your phone. The battery indicator

bar starts to scroll.

The text Charging is briefly displayed if the phone is switched on. You can use the phone while

charging.

If the battery is totally empty, it may take a few minutes before the charging indication appears on

the display or any calls can be made.

The charging time depends on the charger and battery used. For example, charging a BLL-2 battery

with an ACP-8 charger takes 2 hours 45 minutes.

3. The battery is fully charged when the battery indicator bar stops scrolling, and the text Battery full

is briefly displayed (if the phone is on).

If the text Not charging is displayed, charging has been suspended. Wait for a while, disconnect the

charger, plug it in again and retry. If charging still fails, contact your dealer.

I Switching the phone on and off

Press and hold the power key.

If the phone asks for a PIN code:

The PIN code is usually supplied with the SIM card.

• Key in the PIN code (displayed as ****), and press OK.

See also ’Access codes’ on page 122.

If the phone asks for a security code:

• Key in the five-digit security code (displayed as *****), and press OK.

See also ’Access codes’ on page 122.

Warning! Do not switch on the phone when wireless phone use is prohibited or when it may

cause interference or danger.

Note: Your phone has a built-in antenna. As with any other radio-

transmitting device, do not touch the antenna area unnecessarily

when the phone is switched on. Contact with the antenna affects call

quality and may cause the phone to operate at a higher power level

than otherwise needed. Not touching the antenna area during a call

optimizes the antenna performance and the talk time of your phone.

3. Call functions

I Making a call

1. Key in the phone number including the area code.

To edit a number on the display, press

character to the left of the cursor.

to move the cursor. Press Clear to delete the

2. Press

3. Press

or press Options and then select Call to call the number.

to end the call (or to cancel the call attempt).

Normal position: Hold the phone as you would any other telephone.

International calls

1. Press

code).

twice for the international prefix (the + character replaces the international access

2. Enter the country code, area code, and the phone number.

3. To call the number, press

Making a call using the phone book

1. Press Names.

2. Scroll to Search and press Select.

3. Key in the first letter or more of the name and press Search.

You can skip this step if you like.

4. Use and to reach the desired name.

5. Press to call the number.

Tip: You can enter the Phone book quickly by pressing in the standby mode the scroll keys

Last number redial

The last ten phone numbers you called or attempted to call are stored in the phone’s memory. To redial

one of these last-dialled numbers:

1. When in the standby mode, press

once to access the list of the last-dialled numbers.

2. Use or to reach the desired number or name and press

Making a call by saying a voice tag

Before you can make a call using voice tags, you must add the voice tag to a name. See ’Voice dialling’

on page 50.

Speed dialling a phone number

If you have assigned a phone number to one of the speed dialling keys

, you can call that

phone number in either of the following ways:

• Press the corresponding speed dialling key and press

• If the Speed diallings set to On: Press and hold the corresponding speed dialling key

to ) until the call is started.

(

See ’Assigning a phone number to a speed dial key’ on page 44 and ’Speed dialling a phone number’

on page 34.

Note: Pressing and holding

dials your voice mailbox number.

Calling your voice mailbox

1. Press and hold

when in the standby mode.

2. If the phone asks for the voice mailbox number, key it in and press OK. You obtain this number from

your service provider. To edit this number at a later time, see ’Voice mailbox number (Menu 4-4-3)’

on page 84.

Adjusting the earpiece volume

You can adjust the earpiece volume of your phone during a call. Press

to increase and

decrease the volume level. See also ’Automatic volume control (Menu 4-1-1)’ on page 77.

I Answering a call

1. To answer a call, press

2. Press

to end the call.

Muting the ringing tone

You can mute the ringing tone by pressing Options. Now you can answer the call either by selecting

Answer from the selection list or by pressing

Rejecting a call

To reject an incoming call and to send the caller the ’line busy’ tone, press

or Reject. If the Divert

if busy function is activated ’Call divert (Menu 5)’ on page 87, the call is diverted for example to your

voice mailbox.

I In-call options

Your phone provides a number of functions that you can use during a call. Many of the in-call options

are network dependent.

By pressing Options during a call some or all of the following in-call options may be available:

• AVC on or AVC off (to set the automatic volume control on or off)

• Hold or Unhold (to put a call on hold or to re-activate a call)

• New call (to make a call when you have a call in progress)

• Send DTMF (to send DTMF tone strings stored in the phone book or keyed in manually, for example,

passwords or bank account numbers)

• End all calls (to end all calls)

• Phone book (to access the phone book)

• Menu (to access the Menu)

• Mute or Unmute (to mute the phone’s microphone or converse)

• Swap (to switch between the active call and the call on hold)

• Transfer (to connect a call on hold with an active call and to disconnect you from both calls)

The options Conference, Private and End active call are available when two or more calls are active

simultaneously. You can make new calls during a call by selecting New call option. These incall-options

are also network dependent.

Call waiting

This network service allows you to answer an incoming call while you have a call in progress if you

have activated the menu function Call waiting service (Menu 4-1-5).

1. Press Answer or

. The first call is put on hold.

2. To switch between the two calls, press Swap or

3. To end the active call, press

, (or to end both calls at the same time, press Options, scroll to

End all calls and press OK.)

Tip: If you do not want to answer the call, you can ignore it or reject it. To reject the call,

press Options, then scroll to Reject and press OK. If you have activated the call divert

Divert if busy (Menu 5-2), a rejected call will also be diverted.

Call holding

This network service allows you to make another call while you have a call in progress.

1. Press Hold or press

. The first call is put on hold.

2. Make the second call.

3. To switch between the two calls, press Swap or

To end the active call, press

Tip: You can also mute the line for a while. Press Options, scroll with

Mute. When you want to resume the muted call, press Unmute.

Making a conference call

This network service allows up to six persons to take part in a conference call.

1. Make a call to the first participant.

2. Press Options and scroll to New call and press Select. Make the call to the second participant. The

first call is put on hold.

3. To join the first participant in the conference call, press Options, choose Conference and press

Select.

4. To add a new person to the call, repeat the steps 2 and 3.

5. To have a private conversation with one of the participants:

• Press Options, scroll to Private and press Select, then scroll to the desired participant and press

OK. Once you have finished the private conversation, return to the conference call as described

in step 3.

6. To end the conference call, press

or select Options and then End all calls.

4. Phone book

I Phone book basics

There are two separate memories you can store names and phone numbers to:

• the phone’s internal phone book

The phone’s internal phone book can store up to 255 names (each of which can have up to 50

characters) and phone numbers . You can store 3 numbers and one text note to a name.

If you have less than 255 names stored in the phone’s internal phone book, you may be able to store

up to 5 phone numbers and two text notes per name.

• the SIM card memory

The phone supports SIM cards that can store up to 250 names and phone numbers.

You can use only one memory at a time.

Note: Certain features, such as storing multiple numbers and text items per name or attaching voice

tags to numbers only work when the phone’s memory is in use. If you have numbers stored in the

memory of the SIM card, first copy them to the phone memory.

Selecting the phone book

You can set the phone to use its internal phone book or the SIM card memory for storing names and

numbers.

1. In the standby mode, press Names.

2. Scroll with

to Options and press Select.

3. Scroll to Memory in use and press Select.

4. Scroll to Phone (to set the phone to use its internal phone book) or SIM card (to set the phone to

use the SIM card memory) and press Select.

Note: After the SIM card is changed, the SIM phone book is automatically selected.

Copying phone books

You can copy names and phone numbers from the phone’s memory into your SIM card’s memory or

vice versa.

1. In the standby mode, press Names.

2. Scroll to Copy and press Select.

3. Scroll with

to the desired copying direction (From phone to SIM card or From SIM

card to phone) and press Select.

4. Scroll to One by one, All or Default Nos. and press Select.

If you selected One by one, scroll to the name you want to copy and press Copy.

Note that when you copy From SIM card to Phone, the text Default Nos. is not shown.

5. Select whether you want to keep the original names and numbers or not.

6. If you selected All or Default Nos., press OK when the text Start copying? is displayed.

Note that after pressing Copy or selecting All or Default Nos. the selection list Keep original, Erase

original appears.

Entering the phone book

• Press Names in standby mode, scroll with

to the desired function and press Select.

• In standby mode, press

to enter the phone book quickly.

• During a call: Press Options, scroll with

to Phone book, and press Select when

Search is highlighted.

Storing names and numbers

1. Press Names, scroll to Add name and press Select.

2. Key in the name; press a number key ( to

) repeatedly until the desired character or

number appears. The most common punctuation marks and special characters are available under

the number key . To insert a space, press

Note: All characters available under a number key are not printed on the key. The characters

available under a number key depend on the language selected in the menu 4-2-1.

3. Press OK.

4. Key in an area code and phone number, and press OK. If you wish to add a voice tag, see ’Adding a

voice tag to a phone number’ on page 51.

Writing text:

• If the next letter is located on the same key as the present one, press

(or wait until the

cursor appears again) and then key in the letter.

• To switch between upper case and lower case, press

quickly. The symbol ABC or abc shown at

the top of the display indicates the selected case.

• To insert a number, press and hold the key labelled with the desired number. To switch between

letters and numbers, press and hold

display.

. Number mode is indicated by 123 at the top of the

• Pressing

brings up a list of special characters. Move through the list to the desired character

with

and press Use to insert it in the name.

• If you make a mistake, you can remove characters to the left of the cursor by pressing Clear as

many times as necessary. Pressing and holding Clear will clear the screen.

•

and

Tip

move the cursor right and left, respectively.

Quick save:

When in the standby mode, key in the phone number, press Options, and select Save. Then,

enter the name and press OK.

Or, if you wish, save the number only: key in the phone number and press and hold Options.

Recalling a name and phone number

1. In the standby mode, press Names.

2. Scroll to Search and press Select.

3. Key in the first character of the name (or, press List to access the list of names) you are searching

for and press Search.

4. Press

until the desired name appears.

to call the highlighted name.

5. Once the desired name is highlighted press

Tip: To quickly access the list of stored names and numbers, press

when the

phone is in the standby mode.

Organising the phone book

Editing a name and number

1. Recall the name or number you want to edit and press Details. Then press Options.

2. Scroll to Edit name or Edit number and press Select.

3. Edit the name or number and press OK.

Erasing a name and number

You can remove names and phone numbers from the selected phone book one by one or all at once.

To erase a name and number

1. Recall the name and number you want to edit and press Details. Then press Options.

2. Scroll to Erase and press Select.

Note: If you have stored multiple numbers per name, the option Erase deletes the name, all the

numbers and the text notes stored under it.

To erase all names and numbers

1. Press Names, scroll to Erase and press Select.

2. Scroll to Erase all and press Select.

3. Scroll to the phone book you want to erase (SIM card or Phone) and press OK.

4. Press OK when the text Are you sure? is displayed and then key in your security code and press OK.

I Further phone book functions

Assigning a phone number to a speed dial key

You can set any of the number keys

to work as a speed dial key. To do this you need to

assign a phone number to a number key.

1. Press Names and scroll to Speed dials and press Select.

2. Scroll to the desired speed dial key (2 to 9), and press Assign.

3. Press Search, and scroll to the name or number and press Select.

4. Press Select to assign the displayed number.

After assigning a number to a speed dial key, you can call, view or change the number or undo the

speed dial. See ’Speed dialling a phone number’ on page 34.

Caller groups

You can set the phone to sound a specific ringing tone and show a selected graphic on the display

when you receive a call from a particular name and phone number. To do this, first include a name and

number in a caller group. Then, define a ringing tone and graphic for this group.

Note: You can set the phone to ring only upon receiving calls from names and numbers that belong to

a specific caller group by using the Alert for setting under the Profiles menu, see ’Customising Profiles’

on page 75.

Adding a name and phone number in a caller group

1. Press Names, scroll with

to Caller groups, and press Select.

2. Scroll to the desired caller group and press Select.

3. Scroll to Members and press Select.

4. Press OK when Add name is highlighted, then scroll to the desired name and press Add.

5. If you have more than one number stored under the name, scroll to the number that you want to

add to the caller group and then press OK.

Tip: You can also add a new name to a caller group by recalling it from the phone book. At

the desired number, first press Details and then Options. Scroll to Caller groups and press

Select. Scroll to the desired caller group and press Select.

Setting a ringing tone and graphic for a caller group and renaming a caller group

1. Press Names, scroll to Caller groups and press Select.

2. Scroll to one of the caller groups and press Select.

3. Scroll to one of the following settings and press Select.

• Group title. To rename the caller group, key in a new name and press OK.

• Group ringing tone. To set the phone to ring a specific ringing tone for the group, scroll to the

desired tone and press OK. Default is the tone selected for the currently selected profile.

• Group graphic To set the phone to display the group graphic, scroll to On and press OK.

The option list includes options for viewing and sending (Send graphic) the graphic as an Over The Air

(OTA) message, if supported by your network.

You can also receive a new group graphic to your phone as an OTA message. When you receive a group

graphic, press Show, then press Options, select Save or Discard and press Select. If you selected Save,

reach the desired caller group and press OK.

Removing a name and number from a caller group

1. Press Names, scroll to Caller groups and press Select.

2. Scroll to the desired caller group and press Select.

3. Scroll to Members and press Select.

4. Scroll to the name you want to remove, press Options and scroll to Remove name and press OK.

Copying via infrared

Copying a name and number from your phone

Using your phone’s infrared (IR) port, you can send phone book entries as business cards to a

compatible phone or PC which is running an appropriate application.

1. Make sure that the other phone or the PC is set up to receive data via its IR port.

2. Recall the name and phone number to be copied .

3. Press Options, scroll to Send card via IR to copy the phone number and name to another phone or

PC.

4. Press Select.

Copying a name and phone number to your phone

To copy names and phone numbers from another compatible phone.

1. Press Menu, scroll to Infrared (Menu 12) and press Select. Your phone is ready to receive data

through its IR port.

The user of the other phone can now send the name and phone number via Infrared.

2. Once the name and phone number have been copied to your phone, press Show. Then press

Options, select Save or Discard, and press Select.

Sending and receiving names and phone numbers

You can send or receive a person’s contact information as a business card either via IR or as an Over

The Air (OTA) message if supported by the network.

To send a business card as an OTA message, find the desired name and number from the phone book

and then use the option Send card.

To send a business card via IR, use the option Send card via IR . See also Copying via infrared on page

46.

When you receive a business card, press Show. Then press Options, select Save or Discard, and press

Select.

Note: Business cards are always stored in the phone’s memory.

Storing multiple numbers and text items per name

You can use your phone as a contact manager, since the phone’s internal phone book allows you to

store multiple phone numbers as well as text, such as an E-mail address, a street address or a note

under a name. You can store up to 2 text items per name.

The first number stored under a name is automatically set as the default number. When you select a

name from the phone book, e.g. to make a call or to send a message, the default number is used unless

you select another number. You can store up to 5 numbers per name.

For each number or text item you can select a number type. If you do not select any number type,

will be used as the number type. The default number is indicated by the box around the number type

icon, e.g.

Adding a new number or text item to a name:

Multiple numbers can be stored only in the phone’s memory.

Note: Before storing names and numbers, change the memory in use from SIM card to Phone. For

instructions, see ’Selecting the phone book’ on page 39.

1. Enter the names list, for example, by pressing

2. Scroll with

to the name to which you want to add a new number or text item and

press Details.

3. Press Options and scroll to Add number or to Add text and press Select.

4. Scroll to one of the number or text types and press Select.

General (default type when no other type is selected)

Mobile

Home

Office

Fax

Text types:

E-mail

Postal add.

Note

You can later change the number or text type by using the Change type option in the option list.

5. Enter the number or enter the text and press OK to save it.

6. Press Options (and then repeat steps 3 - 4) if you wish to continue adding numbers or text items to

the name. Press Back, and then Exit to exit the phone book and to return to the standby mode.

To change the default number:

1. Once in the names list, scroll to the desired name and press Details.

2. Scroll with

to the number you want to set as the default number, press Options.

3. Scroll to Set as default and press Select.

Setting the type of view for stored names and numbers

You can set your phone to show the stored names and numbers in two different ways.

1. Press Names, scroll with

to Options and press Select.

2. Scroll to Type of view and press Select.

3. Scroll to Name list (shows three names at a time) or Name & number (one name and phone number

at a time) and press OK.

Service numbers

By using this function you can easily dial any of the service numbers your service provider may have

stored in your SIM card. This function is not displayed if there are no service numbers stored in your

SIM card.

1. In the standby mode, press Names.

2. Scroll with

to Service Nos. and press Select.

to call the number.

3. Scroll to the desired service number, press

Memory status

You can check what percentage of the phone’s internal memory is in use or how many names and

numbers are stored on the SIM card’s memory and how much memory is still free.

1. When in the standby mode, press Names.

2. Scroll with

3. Scroll to Memory status and press Select. The status of the SIM card is displayed.

4. Press or to see the status of the phone’s internal memory.

to Options and press Select.

I Voice dialling

The voice dialling feature allows you to make phone calls by saying a voice tag that has been added to

a desired phone number. Any spoken word(s) such as a person’s first name, surname and type of

number (e.g. mobile) can be a voice tag.

Before using voice dialling:

• Voice tags can be stored only in the phone’s memory. Save or copy the phone numbers, to which you

want to add a voice tag, in your phone’s memory.

• When recording a voice tag or making a call by saying a voice tag, hold the phone in the normal

position near to your ear.

• Voice tags are not language dependent. They are dependent on the speaker’s voice.

• Voice tags are sensitive to the background noise; record voice tags in a quiet environment.

• Very short names are not accepted; use long names and avoid similar names for different numbers.

Note: The phone must be in a service area with adequate cellular signal strength. Also, you must

say the name exactly as you said it when you recorded it. This may be difficult in, for example, a

noisy environment or during an emergency, so you should not rely solely upon voice dialling in all

circumstances.

Adding a voice tag to a phone number

Voice tags can only be added to the phone numbers stored in the phone’s memory.

First, change the memory in use from SIM card to Phone, see ’Selecting the phone book’ on page 39 for

instructions. Then, save a name and number in the phone’s memory.

1. Press

to access the list of names.

2. Scroll with

3. Scroll with

to the name you want to add a voice tag to and press Details.

to select the number to which you want to add a voice tag.

4. Press Options and scroll with

to Add voice tag and press Select.

5. Press Start when the text Press Start, then speak after tone is displayed: The phone sounds a

notification tone and Please speak now is displayed.

6. Hold the phone near to your ear and say clearly the word(s) you want to record as a voice tag after

you hear the starting tone.

7. After recording the phone plays the recorded tag and Playing voice tag is displayed. If you do not

want to save the recording, press Stop.

8. When the voice tag has been successfully saved, Voice tag saved is displayed and you can hear a

beep.

The voice tag is now stored in the phone’s memory and the symbol

appears above the phone

number with the voice tag.

Note: Only eight phone numbers can have a voice tag. When the memory is full, delete some of the

voice tags.

Making a call by using a voice tag

1. In the standby mode, press and hold Names to start the voice dialling: A short tone is played and

Please speak now is displayed.

2. Hold the phone in the normal position near to your ear and say the voice tag clearly.

3. The phone plays the name and then automatically dials the number of the recognised voice tag

after 1.5 seconds.

• If the text No voice tags saved is displayed after you press and hold Names, make sure that the

phone’s memory is in use.

Making a call when using the HDC-9P headset

1. Press and hold the key on your headset: a short tone is played.

2. Say the voice tag clearly.

3. The phone plays the recognised tag and then automatically dials the number of the recognised

voice tag after 1.5 seconds.

Replaying, erasing or changing a voice tag

1. In the standby mode, press Names to access the phone book.

2. Scroll to Voice tags and press Select. Use scroll keys

to find the name with the voice

tag you wish to replay, change or erase.

To replay a voice tag: At the desired name, press Options, scroll to Playback and press Select. Hold

the phone close to your ear to hear the voice tag.

To erase a voice tag: At the desired name, press Options, scroll to Erase and press Select. Press OK

when Erase voice tag? is displayed.

To change a voice tag:

•

At the desired name, press Options, scroll to Change and press Select: Press start then speak

after tone is displayed.

• Press Start: The phone sounds a notification tone and Please speak now is displayed.

• Say the new voice tag clearly. The phone replays the new voice tag and confirms that the new voice

tag has been stored.

5. Using the Menu

The phone offers a range of functions that allow you to tailor the phone to your needs. These functions

are arranged in menus and submenus.

Most of the menu functions are provided with a brief help text. To view the help text, scroll to the

desired menu function and wait for 15 seconds. To exit the help text, press Back.

The menus and submenus can be accessed by scrolling or by using the shortcuts.

I Accessing a menu function by scrolling

1. To access the menu facility, press Menu. Press

to reach the desired main menu, e.g.

Settings. Press Select to enter the menu.

2. If the menu contains any submenus, find the one you want by scrolling with

. Press

Select to enter the submenu (for example Keylock settings).

3. If the menu you have selected contains submenus, repeat step 2. Press Select to enter the next

submenu (for example Automatic keylock).

4. Press

to find the setting of your choice and confirm the chosen setting.

Tip: You can return to the previous menu level by pressing Back or exit the menu without

changing any settings by pressing and holding Back.

You can always exit the menu without changing the menu settings by pressing

I Accessing a menu function by using its shortcut number

The menu items (menus, submenus and setting options) are numbered and can be accessed quickly by

using their shortcut number. For menu shortcuts, see the list of menu functions.

1. Press Menu.

2. Key in quickly, within two seconds, the index number of the menu function you want to access. For

example, to set the Automatic keypad locking on: Press Menu,

and

• Menu for entering the menu

•

for Settings

for Keylock settings

for Automatic keylock.

I List of menu functions

1. Messages

3. Profiles

1. Write message

2. Inbox

3. Outbox

4. Archive

5. Templates

1. General

1. Activate

1. Continuous

2. Timed

2. Personalise

1. Incoming call alert

2. Ringing tone

3. Ringing volume

4. Vibrating alert

5. Message alert tone

6. Keypad tones

7. Warning tones

8. Alert for

6. My folders

7. Erase all

8. Message settings

2. Call register

1. Missed calls

2. Received calls

3. Dialled numbers

4. Erase recent call lists

2. Silent

1. Activate

1. Continuous

2. Timed

2. Personalise (same submenus as in

General)

3. Rename

3. Meeting

(same submenus as in Silent)

4. Outdoor

(same submenus as in Silent)

5. Call duration

1. Last call duration

2. All calls’ duration

3. Received calls’ duration

4. Dialled calls’ duration

5. Clear timers

6. Call costs

1. Last call units

2. All calls’ units

5. Pager

5. Display contrast

(same submenus as in Silent)

6. Confirm SIM service actions

6. Handsfree¹(same submenus as in General

plus Automatic Answer and Lights)

7. Headset²(same submenus as in General

plus Automatic Answer.)

3. Keylock settings

1. Automatic keylock

2. Keylock code

3. Change keylock

4. Communication settings

1. Info service

2. Listen to voice messages

3. Voice mailbox number

4. Service command editor

5. Security settings

1. PIN code request

2. Call barring service

3. Fixed dialling

4. Closed user group

5. Security level

6. Change of access codes

1. Change security code

2. Change PIN code

3. Change PIN2 code

4. Change barring password

4. Settings

1. Call settings

1. Automatic volume control

2. Anykey answer

3. Automatic redial

4. Speed dialling

5. Call waiting service

6. Line for outgoing calls³

7. Summary after call

8. Fax or data call

9. Own number sending

2. Phone settings

1. Language

2. Cell info display

3. Welcome note

4. Network selection

6. Restore factory settings

1. Profile is shown only if the phone is or has been used with the CARK111 car kit. Activation of the profile is automatic.

2. Profile is shown only if the phone is or has been used with the HDC-9P headset. Activation of the profile is automatic.

3. If your SIM card does not support Line for outgoing calls function, the numbering of Summary after call, Fax and data

call and Own number sending changes.

5. Call divert

3. Find

4. Edit

5. Erase

6. History

1. Divert all voice calls

2. Divert if busy

3. Divert if not answered

4. Divert if out of reach

5. Divert if not available

6. Divert all fax calls

7. Divert all data calls

8. Cancel all diverts

6. Games

10.Clock

1. Stopwatch

2. Alarm clock

3. Time settings

11.Sound meter

12.Infrared

1. Snake II

2. Opposite

3. Pairs II

4. Settings

13. Services

1. Home

2. Bookmarks

3. Settings

7. Calculator

8. Calendar

4. Go to address

5. Clear the cache

9. Task journal

1. Restart

14.SIM services²

2. Add new¹

1. This is the only menu item shown if there are no previous tasks in the Task list.

2. Only shown if supported by your SIM card. The name and contents vary depending on the SIM card.

6. Menu functions

I Messages (Menu 1)

Within the Messages menu you can read, write and send text messages of up

to 160 characters or save your own messages in the folders for later use.

Note: The message centre number is often stored to your SIM card, but if it’s not, you need to store it

inthe Message centre number option under Message settings before you are able to send or receive

any messages. Contact your service provider for the message centre number.

Writing and sending text messages

Within the Write message menu you can write and edit text messages of up to 160 characters. You can

use:

• traditional text input, indicated by

To insert a character, you need to press the key labelled with the required letter as many times as is

necessary.

For more information, see ’Storing names and numbers’ on page 41.

• predictive text input, indicated by

When writing complete words, for inserting a character you need to press the key with the

corresponding letter only once.

1. In the standby mode, press Menu, press Select when Messages is displayed.

2. Press Select when Write message is displayed.

3. Key in a message.

Tip: When writing a text message, the phone uses the text case, which automatically

writes the first character of a sentence in upper case.

You can also insert templates (see ’Standard answers and templates’ on page 63) and

pictures (see ’Inserting pictures’ on page 63) into your messages.

4. To send the message, press Options.

5. Press Select when Send is highlighted.

The option list includes options for sending, saving and erasing the message you are writing.

Tip: You can also send the message by pressing

after you have written it.

6. Enter the recipient’s phone number, or recall the phone number from phone book by pressing

Search. Find the desired number and press OK.

7. Press OK to send the message.

Predictive text input

Predictive text input allows you to key in any characters by single keypresses when writing complete

words. This text input is based on a built-in dictionary to which you can add new words.

Selecting the language for predictive text input

1. Press Menu, press Select when Messages is displayed.

2. Press Select when Write message is displayed.

3. Press Options and scroll to Dictionary and press Select.

Note: Predictive text input is only available for the languages listed in the dictionary option list.

4. Scroll to the desired language and press Select. T9 dictionary activated is displayed and the

predictive text input is now on, indicated by

You can change from the predictive text input to the traditional text input by pressing Options and

scrolling to Dictionary. Select Dictionary off and press Select.. T9 dictionary deactivated is

displayed.

Tip: Press and hold Options to quickly activate or de-activate the predictive text input.

Alternatively, press

twice.

Writing words with predictive text input

1. Start writing a word by using the keys

writing complete words.

. Press each key only once for one letter when

For example, to write hello with the English dictionary selected:

The word changes after each keystroke - ignore how the word appears on the display before you

have keyed in all its characters.

• To delete a character, press Clear.

• To change the character case, press

• To change between letter and number mode, press and hold

• To insert a word, press Options. Scroll to Insert word and press Select. Write the word and press

Save.

• To insert a single number in character mode, press and hold the respective number key.

• To insert several numbers, press Options. Scroll to Insert number and press Select. Key in the

desired numbers and press OK.

• To insert a symbol, press and hold

. Select the desired symbol and press Use

Alternatively, press Options, scroll to Insert symbol, and press Select. Scroll to the desired

symbol and press Use.

2. When you have finished writing the word and it is correct, confirm it by pressing

space with

or adding a

3. If the word is correct, start writing the next word.

If the word is not correct, you have the following options:

• Press

repeatedly until the desired word appears and confirm it.

• Press Options, scroll to Next match and press Select. Next match is shown in the editor.

If the ? character is displayed after the word, the word you intended to write is not in the dictionary.

To add the word to the dictionary, press Spell.

Adding the desired word to the match list

1. If no matches are found in the predictive text input mode, you can insert a new word into the

dictionary. Press Spell and key in the desired word using traditional text input.

2. Press Save.

Note: When the dictionary is full, the new word replaces the least used word in it.

Writing compound words

1. Key in the first part of the word and accept it by pressing

2. Write the last part of the compound word and accept the word by pressing

Standard answers and templates

Your phone offers you a list of standard answers and templates that you can use in replying to

messages. You can also use templates when writing messages.

You can find the list of default templates in the Templates folder of the Messages menu. You can edit

the text message templates to your liking, but the original templates will be restored when the Menu

4-6 is selected (Restore factory settings).

To insert a template:

1. When in Write message menu, press Options.

2. Scroll to Insert template and press Select.

3. Scroll to the desired template and press Select.

The icon is displayed in front of text message templates. The

picture message templates.

icon is displayed in front of

Inserting pictures

Your phone offers you 10 picture message templates. You can also save new picture templates into the

Templates folder. More templates can be found on the Nokia website (http://www.club.nokia.com).

Note: This function can be used only if it is supported by your network operator or service provider.

Only phones that offer the picture messages feature can receive and display picture message.

To insert a picture in a text message:

1. When in the message editor, press Options.

2. Scroll to Attach picture and press Select. The list of picture message templates is displayed.

3. Scroll with

to the desired picture message template and press Select to view it.

Note: Picture templates have default titles but you can change them by selecting the option

Rename and keying in the new title.

4. To insert the picture into your message, press Use. When the picture has been attached to your

message, the text Picture attached is displayed and the phone returns to the message editor.

The indicator means that the picture has been attached. The number of characters that you can

enter in a picture message depends on the size of the picture.

5. If you want to see the text and the picture together before sending the message, press Options,

scroll to Preview and press Select.

If you want to change the attached picture, select the option Replace picture. If you want to

remove the attached picture, select the option Remove picture.

6. To send the message, press Options and select the option Send.

• Note that each picture message is made up of several text messages. Therefore, sending one picture

message may cost more than sending one text message.

• Since picture messages are saved in the phone’s memory, you cannot view them if you use the SIM

card with another phone.

Reading and viewing text and picture messages

When you have received a text or picture message, the

indicator and the number of new

messages followed by Message(s) received will appear on the display.

1. Press Show to view the message or press Exit to view it later.

To read the text message later:

Once in the Messages menu, scroll to Inbox and press Open. Scroll to the desired message and

press Select to read it. An unread text message is indicated by the

icon in front of it. The

message is stored in the Inbox folder after you have read it.

To view the picture message later:

Once in the Messages menu, scroll to Inbox and press Open. Scroll to the desired message and

press Select to view it. An unviewed picture message is indicated by the icon in front of it.

2. While reading and viewing the message, press Options to scroll through the list of options and

press Select at the highlighted option to select it.

The option list includes options for erasing, replying, forwarding, moving, editing, and renaming the

message you are reading. You can also change the font size of the message you are reading.

• Note that when you are replying to a picture message, only the text is copied to your reply

message. When you are editing a picture message, only the text can be edited, not the picture.

• If you want to save the picture for later use select the option Save picture: the picture is saved

in the Templates folder.

You can also copy the message to your phone’s calendar as a reminder note (Copy to cal.). The

Details option shows you, e.g., the sender’s name and phone number, message centre used for

sending, reception date and time. If you want to extract numbers from the current message, use the

option Use number, or press

Replying to a message

1. Once in a message you want to reply to, press Options, scroll to Reply or to Reply (text) if you are

replying to a picture message, and press Select.

2. Scroll to one of the following reply types and press Select.

• Empty screen. Original message is not included in the reply message.

• Orig. message. Original message is included in the reply message.

• Standard answers, e.g. Yes, Thank you or Congratulations. Only the selected standard answer is

included in the reply message. The standard answer can also be modified and additional text can

be added.

• Template. The selected template is included in the beginning of the reply message. The template

text can be modified and additional text can be added.

3. If you selected Template, the list of templates, including e.g. Please call or See you in, is displayed.

Scroll to the desired template and press Select.

4. Write your reply message and press Options, scroll to Send and press Select. Press OK to send the

message to the displayed number.

Special sending options

Sending a text message to multiple recipients

You can send a message to multiple recipients. When sending a reply message, use the Multiple copies

option under Forw. options, and when writing and sending a message, use Multiple copies under Send

options.

1. After you have written the message, press Options, scroll to Send options and press Select.

2. Scroll to Multiple copies and press Select: the list of names is displayed.

3. Scroll to the desired name and press OK to send the message.

4. Then select the next recipient and press OK.

5. When you do not want to send the message to any more recipients, press Done.

Sending a text message by message profile

You can send or forward a text message, for example to a fax number, by using the Message profile

option under Send options or under Forw. options if this profile is supported by your network.

For example, in order to send a text message to a fax, you first need to define one message profile

under the message settings for fax transmissions. See ’Message settings’ on page 69.

1. After you have written the message, select Message profile .

2. Scroll to the message profile you have defined for fax transmissions and press Select.

3. Enter the fax number or recall it from the phone book and press OK.

Tip: If you have stored the fax number under the Default recipient number setting of the

selected message profile, the phone automatically suggest that number. Press OK to accept

the number.

Organising your messages

All the messages stored in your phone’s message memory are organised in folders.

Inbox and Outbox folders

After you have read an incoming text or picture message, the phone stores the message in the Inbox

folder of the Messages menu.

When you save a message you have written and/or sent, the phone stores the message in the Outbox

folder.

Note: The blinking

icon indicates that the message memory is full. Before you can receive new

messages, delete some of your old messages.

Archive folder and user-specified folders

If you want to make sure that certain messages will not be overwritten when the message memory

becomes full, or if you want to further organise your messages, you can move some of your messages

to the Archive folder or you can add new folders under the Messages menu and store some of your

messages there.

Adding a folder:

1. Once in the Messages menu, scroll to My folders and press Open.

2. Press Optionsand scroll to Add folder and press Select. Enter the name of the new folder and press

OK.

Deleting the contents of a single folder or of all the folders:

1. Once in the Messages menu, scroll to Erase all and press Select.

2. Do either of the following:

Scroll to the folder whose contents you want to delete and press OK. Then press OK at the prompt

Erase all read messages from folder?

Scroll to All read and press OK to erase all read messages from all the folders. Then press OK at the

prompt Erase all read messages from folder?

Deleting a folder:

1. Once in the Messages menu, scroll to My folders and press Open.

2. Scroll to the folder you want to delete and press Options.

3. Scroll to Remove folder and press Select.

Note: When you delete a folder, all the messages contained in that folder are also deleted.

Moving or erasing a text or picture message:

1. Once in the desired message, press Options.

2. Scroll to Move or to Erase and press Select.

3. If you want to move a message, scroll to the selected folder name and press OK.

Message settings

To access the message settings list:

1. Once in the Messages menu, scroll to Message settings and press Select.

2. Scroll to the setting you want to set and press Select.

There are two kinds of message settings in your phone: message profile specific settings and settings

common to all text messages.

A message profile is a group of settings needed for sending text messages. The phone uses the settings

Message centre number, Messages sent as and Message validity under the Message settingsmenu

as a default message profile if you do not select another set when sending a message.

When, for example, you reply to a text message and select Send or when you write a text message and

select Send, the phone automatically uses the default message profile.

You can also send a text message to a fax or to an e-mail address (if supported by your service provider)

if you have defined a message profile with proper settings for fax or e-mail transmissions. See also

’Special sending options’ on page 66.

Settings common to all text messages

The following message settings under the Message settings menu are common to all outgoing text

messages, irrespective of the selected set.

• Delivery reports

You can request the network to send delivery reports on your text messages (network service). A

delivery report is indicated by in front of the message header.

• Reply to you via same centre

This network service allows the recipient of your text message to send you a reply message via your

text message centre.

Setting for Message profiles¹

Within the Message profiles submenu of the Message settings you can change the settings of a

particular message profile². Each of the message profiles has its own submenu with the following

functions:

• Message centre number

With this submenu you can store the phone number of the message centre needed for sending text

messages.

• Messages sent as

For normal text messages, select the option Text, for fax transmission, select the option Fax, etc.

Note that you can only use the options Fax, E-mail and Paging, if your messaging service offers the

facility to convert the text messages into these alternative formats. Contact your service provider

for availability of this function.

1. The message profiles menu is only displayed if your SIM card supports more than one set. Each set appears in its own

submenu and may have any name.

2. The number of sets depends on how many sets your SIM card offers.

• Message validity

This network service allows you to set the length of time that your text messages are stored at the

message centre while attempts are made to deliver them.

• Default recipient number

The phone will suggest the number stored under this option as a default number for text message

sending when this message profile is selected.

• Message profile name

Allows you to rename each message profile.

I Call register (Menu 2)

Within this menu you can view and delete phone numbers registered by the

phone, and view the approximate length and cost of your calls (network

service).

In the options of the missed calls, received calls or dialled numbers you can:

• call the number

• save the number in the phone book

• view the date and time of the call

• view, edit or erase the number from the list

Note: The phone registers missed and received calls only if the network supports Calling Line

Identification (CLI), and the phone is switched on and within the network’s service area.

Missed calls (Menu 2-1)

This function allows you to view a list of the last ten phone numbers from which somebody has tried to

call you with no success (network service).

Tip: When a note about missed calls is being displayed, press List to see the phone number.

To call back immediately, press

Received calls (Menu 2-2)

This function allows you to view a list of the ten phone numbers from which you have most recently

accepted calls (network service).

Dialled numbers (Menu 2-3)

This function allows you to view a list of the ten phone numbers that you have most recently dialled,

i.e. called or tried to call.

Tip: To quickly access the list of last dialled numbers, press

once when the phone is in

the standby mode.

Erase recent call lists (Menu 2-4)

This function allows you to delete all the phone numbers which appear in Menus 2-1 ‘Missed calls’, 2-

2 ’Received calls’ and 2-3 ‘Dialled numbers’.

These phone numbers are also erased when you:

• switch on the phone with a SIM card inserted that is not one of the five SIM cards used most

recently with the phone.

• change the ‘Security level’ setting (Menu 4-5-5).

Call duration (Menu 2-5)

This function allows you to view the duration of your incoming and outgoing calls in hours, minutes

and seconds. You can also (by first entering the security code) clear the call timers. See ’Access codes’

on page 122.

Note: The actual time invoiced for calls by your service provider may vary, depending upon

network features, rounding-off for billing, and so forth.

Call costs (Menu 2-6)

This network service allows you to check the cost of your last call or all calls. The call costs are shown

separately for each SIM card.You can limit the costs of your calls to a certain amount of charging units

or units of currency by using the option Call cost limit. You can make and receive charged calls as long

as the specified cost limit is not exceeded. The number of remaining units is shown in the standby

mode. You may need the PIN2 code to set the cost limit.You can set the phone to show the remaining

talk-time (cost limit) in terms of charging units or units of currency by using the option Show cost. You

may need the PIN2 code to select the currency or unit. Contact your service provider for charging unit

prices.The option Clear counters allows you to reset the call cost counters. To clear the counters you

need the PIN2 code. See ’Access codes’ on page 122.

Note: When no more charging or currency units are left, only calls to the emergency

number programmed into your phone (e.g. 112 or other official number) may be possible.

The actual time invoiced for calls by your service provider may vary, depending upon

network features, rounding-off for billing, and so forth.

I Profiles (Menu 3)

Within the Profiles menu, you can adjust and customise the phone tones for

different events, environments and caller groups. Most profiles can also be

set on for a certain period of time.

Note: You can also change the profile by pressing the power key and selecting the required profile with

the scroll keys. It is not possible to select Timed profiles via pressing the power key.

Activating a user profile

If you want to change the currently selected profile (General as default):

1. Press

2. Scroll with

quickly in standby mode.

or to the profile you want to activate and press OK.

1. Press Menu, scroll to Profiles and press Select. Scroll with

and

to the profile you want

to activate and press Options. Confirm the activation of the profile with OK.

2. Select Continuous if you want to activate the selected profile for an indefinite time.

The chosen profile remains active until you activate another profile.

3. Or select Timed if you want to set an expiry time for the profile (within the next 24 hours).

In standby mode a timed profile is displayed with a clock indicator

Note: You must set the phone’s clock before you can time a profile. See ’Set the time (Menu 10-3-

2)’ on page 107.

4. Enter the value in hours and minutes after Expiry time.

5. Confirm the given time value with OK.

Note: If you switch the phone off or connect it to the car kit or to the headset the timed profile is

terminated.

Customising Profiles

1. Press Menu, scroll to Profiles and press Select. The following list of options appears: General,

Silent, Meeting, Outdoor, Pager, Handsfree, Headset.

Note: Handsfree and Headset will not appear in the Profiles list unless the CARK111 car kit or the

HDC-9P headset are connected to your phone. However, the settings for the Handsfree and

Headset will remain in the menu once connected.

2. Scroll to the desired profile and press Options.

3. Select Personalise and press OK.

Note: When the phone is connected to the car kit CARK111 or to the headset HDC-9P, the Activate

function will not be available.

4. Scroll to the setting you want to customise and press Select.

5. Scroll to the desired option and press OK.

Settings you can personalise

Once you have selected the option Personalise, you can customise the following settings of the

selected profile:

• Incoming call alert to define how the phone notifies you of an incoming voice call. The options are:

Ringing, Ascending, Ring once, Beep once and Off.

When Incoming call alert is set to Off, no ringing tone or other alert tones will be heard. This silent

mode is indicated by , however, in Silent and Meeting profiles only.

• Ringing tone to set the ringing tone type for voice calls.

Tip: You can also receive ringing tones via OTA. You can store five ringing tones at a time in

the ringing tone list.

• Ringing volume to set the volume level for the ringing and message alert tones.

• Vibrating alert to set the phone to vibrate at an incoming voice call and at incoming text message.

The vibrating alert does not work when the phone is connected to a charger or desktop stand.

• Message alert tone to set the ringing tone type for text messages.

• Keypad tones to set the volume level for keypad tones or to set the keypad tones off.

• Warning tones to set the warning tones on or off. For example, when set to on, the phone sounds a

warning tone when the battery is running out of power.

• Automatic answer (in Handsfree and Headset profiles only) to set the phone to answer an

incoming voice call after a few seconds.

Note: This function can only be used when your phone is connected to a headset or to a car kit

equipped with the ignition sense option, with the ignition switched on.

• Alert for to set the phone to ring only upon calls from phone numbers which belong to a selected

caller group. Use the scroll keys

to reach the desired group and press Mark.

To set a ringing tone and a group graphic for a caller group, see page 45.

Renaming profiles

You can rename the profiles to your personal liking except for the General, Handsfree and Headset

profiles.

1. Press Menu, scroll with

to Profiles and press Select.

2. Scroll to the profile you want to rename and press Options, then scroll to Rename and press OK.

3. Enter the new name and press OK. To enter letters, see ’Storing names and numbers’ on page 41.

I Settings (Menu 4)

Call settings (Menu 4-1)

Automatic volume control (Menu 4-1-1)

Automatic volume control (AVC) controls the earpiece’s volume level according to the environment

noise level. If the environmental noise and/or level of received speech increases or decreases, AVC

changes also the earpiece’s volume level accordingly and keeps the volume at a right level respectively.

Automatic volume control can be activated by using menus or you can select it during an active call.

Note: AVC on/ AVC off setting during an active call affects only the current call.

Note: The usage of Automatic volume control is possible only in handportable mode. If you are using

the phone in any other modes (for example in Headset mode or in Handsfree mode) the options AVC

on/ AVC off cannot be selected during a call under Options or through the menu.

Activating Automatic volume control via a menu

1. Press Menu, first select Settings, then Call settings.

2. Select Automatic volume control.

3. Choose either Off or On. The default is Off.

Activating Automatic volume control during a call

1. Press Options during an active call.

2. Select AVC on if you want to activate the AVC or select AVC off if you

want to turn the automatic volume control off.

If you increase the volume level during an active call by pressing , the

phone’s volume level increases regardless of AVC being on or off.

When you end the call, the volume level returns to the level previous to AVC adjustment.

Note: If AVC has changed the volume level and you deactivate the AVC during a call, the volume level

stays at the level the AVC has adjusted it to.

Anykey answer (Menu 4-1-2)

When this function is set on, you can answer an incoming call by pressing any key briefly, except

and

. The facility to answer a call by pressing Reject is not available when this function is on.

Automatic redial (Menu 4-1-3)

When this function is set on, your phone will make up to ten attempts to connect the call after an

unsuccessful call attempt.

Speed dialling (Menu 4-1-4)

When this function is set to on, the names and phone numbers assigned to the speed dial keys

can be dialled by pressing and holding the corresponding number key.

Note that pressing and holding the

key dials your voice mailbox number.

Call waiting service (Menu 4-1-5)

When this network service is activated, the network will notify you of a new incoming call while you

have a call in progress. See ’Call waiting’ on page 37.

Line for outgoing calls (Menu 4-1-6)

The SIM card may be used with two subscriber numbers i.e. with two phone lines. Within the menu 4-

3-5, you can select the desired line for making calls. You can also prevent the line selection. For more

information on availability, contact your network operator or service provider.

If you select line 2 and have not subscribed to this network service, you will not be able to make calls.

However, calls on both lines can be answered regardless of the selected line.

You can prevent this menu function from being used by selecting the option Lock from the option list.

Tip: You can switch from one line to the other by pressing and holding

in the standby

mode.

Summary after call (Menu 4-1-7)

When you set this function to on, the phone will briefly display the approximate duration and cost

(network service) of the last call.

Fax or data call (Menu 4-1-8)

Within this menu, you can make a fax or data call. Before using this function you need to activate the

IR port of your phone within the Menu 9 or to connect your phone to a compatible device (for example,

a fax machine).

Own number sending (Menu 4-1-9)

This network service allows you to set your phone number either to be displayed or hidden from the

person you are calling. Set by network resets the phone to the default setting, On or Off, that you have

agreed upon with your service provider.

Note: The numbering of the Summary after call, Fax or data call and Own number sending menus

may vary depending on whether your SIM card supports the Line for outgoing calls function or not.

Phone settings (Menu 4-2)

Language (Menu 4-2-1)

Within this menu you can select the language in which the display texts will be shown. If the setting

Automatic is selected, the language used is chosen based on the current SIM card.

Language setting also affects the time and date formats of the following functions: Alarm clock (Menu

10-2), Time settings (Menu 10-3), Calendar (Menu 8), Task journal (Menu 9).

Cell info display (Menu 4-2-2)

This network service allows you to set the phone to indicate when it is used in a cellular network based

on Micro Cellular Network (MCN) technology (network service).

Welcome note (Menu 4-2-3)

This menu allows you to set the message that is shown briefly when the phone is switched on.

Network selection (Menu 4-2-4)

The network to which you are connected can be selected either automatically or manually.

In Automatic mode the phone automatically selects one of the cellular networks available in your

area; the selected network can be GSM900 or GSM1800.

In Manual mode the phone will show a list of the available networks and you can select the network

you wish to use if this network has a roaming agreement with your home network operator. If no such

agreement is in force, the text No access will be displayed and you must select another network. The

phone will stay in manual mode until the automatic mode is selected or another SIM card is inserted

into the phone.

Display contrast (Menu 4-2-5)

You can adjust the display contrast with this menu. There are ten (10)

possible contrast levels.

1. Select Display contrast under Phone settings.

2. Adjust the display contrast by scrolling with

The contrast bar on the phone’s display indicates the actual display

contrast.

Confirm SIM service actions (Menu 4-2-6)

Within this menu you can set the phone to show you the confirmation messages sent between your

phone and the network when you are using the SIM services by selecting the option Asked. See ’SIM

services (Menu 14)’ on page 119.

Keylock settings (Menu 4-3)

When the keypad is locked,

appears at the top of the display.

Note: When the Keypad lock is on, calls may be possible to the emergency number programmed into

your phone, (e.g. 112 or other official number).

Automatic keylock (Menu 4-3-1)

The automatic keypad lock is a user selectable feature. It functions in principle like a screen saver on

your PC. You can set time delay and when that time is up the keypad is locked automatically preventing

accidental keypresses.

1. Select On if you want to select the automatic keypad lock.

2. Give the time entry in minutes and seconds after Delay time appears on the display.

The default is 01:00. The maximum time entry for the delay is 60 minutes and the minimum entry

10 seconds.

The automatic keyguard activates if:

• phone is in standby mode and a user selectable time delay expires.

Keylock code (Menu 4-3-2)

You can use keylock code to prevent the unauthorised use of your phone. The default code is 0000.

Note: Before activating the keylock code make sure that the PIN code request is also set on.

If you set the keylock code by pressing On this is confirmed with the note Keylock code activated. You

need to enter the required code in the standby mode to unlock the keypad.

Note: To unlock your keypad, press in standby mode Unlock and then key in the four-digit keylock

code. If you enter an incorrect keylock code five times in succession, the phone prompts you to enter

the PIN code instead. After entering the PIN code, you can change your keylock code (Menu 4-3-3).

Change keylock code (Menu 4-3-3)

If you want to change the old or default code to a new one, use this

submenu.

1. Enter the new four-digit keylock code and press OK.

2. Verify the given code.

Note: Despite the keylock code you can answer a call and use other keys as

usual during the call. The keypad lock is reactivated once the call is finished.

If you want to take the default code into use again, you must select Restore factory settings (Menu 4-

6).

Communication settings (Menu 4-4)

Info service (Menu 4-4-1)

This network service allows you to receive messages on various topics (such as weather or traffic

conditions) from your service provider. For available topics and relevant topic numbers, contact your

service provider.

By setting this menu to On, you will receive messages on the active topics. You can edit the list of

topics, and mark a topic active or inactive.

Topic index retrieves a list of available topics from the network. By selecting Topics, you can add a

topic into the topics list. Key in the topic number and name. You can also edit or erase the topic list.

Select Language to set the language for the messages. Only messages in the selected language are

shown.

Tip: You can save info service messages in the Archive folder or in one of the user-specified

folders.

Listen to voice messages (Menu 4-4-2)

When you enter this submenu, the phone automatically calls your voice mailbox at the phone number

stored in Menu 4-4-3. Note that the voice mailbox is a network service and you may need to subscribe

to it first.

When the display text above the left selection key is OK, press the key to call your voice mailbox

number.

Tip: To quickly call your voice mailbox, press and hold

when in the standby mode or

in menus.

Voice mailbox number (Menu 4-4-3)

Within this submenu, you can store and edit your voice mailbox number. Voice mailbox is a network

service. For more information and for the voice mailbox number, contact your service provider.

Service command editor (Menu 4-4-4)

From this submenu you can send service requests (also known as USSD commands), for example

activation of network services commands, to your service provider. For more information, contact your

service provider.

Security settings (Menu 4-5)

Your phone is equipped with a versatile security system to prevent unauthorised use of the phone or

the SIM card. See also ’Access codes’ on page 122.

PIN code request (Menu 4-5-1)

You can protect your SIM card by setting the phone to ask for your PIN code every time the phone is

switched on. To do this, you need to set the menu PIN code request to On. You will need the PIN code

to turn this request function on. The PIN code is usually supplied with the SIM card. If not, contact your

service provider. You can change your PIN code in the Change of access codes menu (4-5-6).

Note: If you enter an incorrect PIN code three times in succession, the SIM card is blocked and you

need to enter the PUK code to unblock the SIM card. See ’Access codes’ on page 122.

Note: Some SIM cards do not allow the PIN code request to be turned off.

Call barring service (Menu 4-5-2)

This network service allows you to restrict incoming calls to and outgoing calls from your phone. A

barring password is required for using this function.

You can select one of the following call restrictions:

• Outgoing calls to bar all outgoing calls.

• International calls to bar all calls to abroad when in the home country.

• International calls except to home country to bar all international calls except to calls to the

home country when abroad.

• Incoming calls to bar all incoming calls.

• Incoming calls when abroad to bar all incoming calls when abroad.

For each of the above settings you can select Activate, Cancel or Check status (to show barred call

types).

Within the submenu Cancel all barrings you can cancel all call restrictions.

Note: When calls are barred, calls may be possible to certain emergency numbers in some

networks (e.g. 112 or other official emergency number).

Fixed dialling (Menu 4-5-3)

This service restricts your outgoing calls to selected phone numbers, if this function is supported by

your SIM card. To save and edit the numbers on the list, you will need to have the PIN2 code.

Note: When Fixed Dial Option is set on, calls may be possible to certain emergency

numbers in some networks (e.g. 112 or other official emergency number).

Closed user group (Menu 4-5-4)

This network service specifies the group of people whom you can call and who can call you. Preset

resets the phone to use a user group the SIM card owner has agreed upon with the service provider. A

closed user group is indicated by the icon . For further information contact your network operator

or service provider.

Note: When calls are limited to Closed User Groups, calls may be possible to certain

emergency numbers in some networks (e.g. 112 or other official emergency number).

Security level (Menu 4-5-5)

You can protect your phone against unauthorised use with the security code (security code). To do this,

you need to set the menu function Security level to Phone or Memory. When set to Phone, the phone

will ask for the security code when the SIM card inserted is not one of the five SIM cards used most

recently with the phone. When set to Memory, the security code is required to enter the phone’s

internal phone book.The security code is also required for using some functions, for example, to clear a

phone book or to restore the factory settings.The security code is usually supplied with the phone (on

an identification sticker). If not, contact your local dealer. The factory setting for the security code is

12345. Change the code within the menu 4-5-6 Change of access codes. Keep the new code secret

and in a safe place which is separate from the phone.

Note: If you enter an incorrect security code five times in succession, the phone is blocked and will not

accept the correct security code for the next five minutes.

Tip: You can also restrict calls made from or to your phone if supported by your network.

See also Call barring service (4-5-2), Fixed dialling (4-5-3) and Closed user group (4-5-4)

in the Settings section

Note: When you change the security level, all the recent calls lists are cleared.

Change of access codes (Menu 4-5-6)

With this menu you can change the access codes: security code, PIN code, PIN2 code and barring

password. These codes can only include the characters 0 to 9. The phone prompts you to enter the

current code and the new code. It also prompts you to verify the new code by entering it again.

Note: Avoid using access codes similar to the emergency numbers, such as 112, to prevent

accidental dialling of the emergency number.

Restore factory settings (Menu 4-6)

You can reset some of the menu settings to their original values. The security code is needed for this

function.

I Call divert (Menu 5)

This network service allows you to direct your incoming calls to another

number (for example, to your voice mailbox number). For details, contact

your service provider.

Within the Menu 5 you can select one of the following diverts:

• Divert all voice calls. All voice calls are diverted and no ringing tone is played at an incoming call.

• Divert if busy. Voice calls are diverted when your number is busy.

Tip: If Divert if busy is activated, rejecting an incoming call will also divert the call.

• Divert if not answered. Voice calls are diverted when you don’t answer a call within the pre-set

timeout.

• Divert if out of reach. Voice calls are diverted when your phone is switched off or outside of the

network service area.

• Divert if not available. Voice calls are diverted when your number is busy, when you don’t answer a

call, and when your phone is switched off or outside of the network service area.

• Divert all fax calls. All fax calls are diverted.

• Divert all data calls. All data calls are diverted.

Select the option Activate to set the divert setting on if allowed by the network, Cancel to set the

divert setting off or Check status to check whether the divert is activated or not.

To cancel all diverts, select the submenu Cancel all diverts.

Tip: The icon

is shown in the standby mode when you have activated the Divert all

and for the

voice calls. If you have two phone lines, the divert icon for your first line is

second line is

I Games (Menu 6)

Your phone offers you three games to play: Snake II, Opposite and Pairs II.

Settings allow you to set the lights and sounds on or off for a game.

Note: Your phone must be switched on to use this function. Do not switch on the phone

when the use of a wireless phone is prohibited or when it may cause interference or danger.

To start a new game

1. Press Menu, scroll to Games and press Select.

2. In Pairs II, select first either Time trial or Puzzle and then the option New game.

In Opposite, select the option New game and in Snake II select the

1 player option.

To start a 2-player game

You can also play Snake II as a 2-player game via the IR port of your phone with a person who has the

same game on a compatible phone. Before starting the 2-player game, ensure that the IR ports of the

two phones are pointing at each other. See ’Infrared (Menu 12)’ on page 109.

To start the game both players should select the option 2 players.

Game options

• New game starts a new game session.

• Level allows you to set the level of difficulty for the selected game. Select the desired level

with

and press OK.

• Instructions shows a help text on how to play the game. Scroll through the text with

• Top score shows the highest score (in Snake II and Pairs II only).

• Continue allows you to resume a paused game.

• Last view shows the final view of the game immediately after the game has ended.

I Calculator (Menu 7)

The calculator in your phone adds, subtracts, multiplies, divides, and converts

currency values. This calculator has a limited accuracy and rounding errors

may occur, especially in long divisions.

Note: Your phone must be switched on to use this function. Do not switch on the phone

when the use of a wireless phone is prohibited or when it may cause interference or danger.

Using the calculator

1. Press Menu, scroll to Calculator, and press Select.

2. When ‘0’ is displayed on the screen, enter the first number in the calculation. To change the sign,

press Options, scroll to Change sign and press Select.

To add a decimal, press

3. To add, press

To subtract, press

To multiply, press

To divide, press

once (+ will appear).

twice (- will appear).

three times (* will appear).

four times (/ will appear).

Alternatively, press Options, scroll to the desired options, and press Select.

4. Enter the second number. Repeat these steps as many times as necessary. Press Clear to erase any

mistakes.

5. For a total, press Options. Scroll to Equals and press Select.

6. To start a new calculation, first press and hold Clear.

Currency conversion

After setting the exchange rate in the Calculator you can convert currencies with your phone either in

Calculator or in standby mode.

In standby mode, enter digits and select Options and then either In domestic or In foreign depending

on which value you require.

Note: In standby mode you find the decimal point under

, if needed. You can also use the asterisk

(*) which functions like a decimal point.

When you key in a number in the standby mode you can create a call with the number or by pressing

Options you get the following selection list:

Save

Add to name¹

Send message

Call

In domestic

In foreign

Setting the exchange rate in Calculator

1. Select Calculator.

2. Press Options and choose Exchange rate.

3. Select either Foreign unit expressed in domestic units or Domestic units expressed in foreign

units.

1. This item shows only if the phone’s internal memory is being used.

4. Set the required exchange rate.

The currency exchange rate is stored permanently in phone’s memory.

I Calendar (Menu 8)

The calendar helps you to keep track of reminders, calls that you need to make,

meetings, and birthdays. The phone sounds an alarm tone when the set date for

a meeting, birthday or a call is reached.

Note: Your phone must be switched on to use this function. Do not switch on the phone

when the use of a wireless phone is prohibited or when it may cause interference or danger.

Calendar views

Day view

The day view shows the date and the icon(s) for each note type you have set for the day. See ’Adding a

calendar note’ on page 93.

To access the day view, press Menu, scroll to Calendar and press Select.

Note view

The note view allows you to view the details of the selected note.

To access the note view:

When in the day view, press Options, scroll to View day notes and press Select.

Week list

The week list allows you to scroll the calendar week by weeks.

To access the week list:

1. When in a day view, press Options.

2. Scroll to View by weeks and press Select.

Options list of calendar views

The option list of calendar views includes options for making a note and for sending a note via the text

message service or via IR.

The option list for day view and note view also includes options for erasing, editing, repeating and

moving a note. For notes of type Meeting, Call and Memo, there is also an option for copying the note

to another day and for repeating the note (every day, every week, biweekly or every year).

The Settings option allows you to set the date, time, date format, time format and week format for the

calendar. The option Auto erase allows you to set the phone to delete old notes automatically after a

specified time. However, the repeat notes (for example, birthday notes) will not be deleted.

Adding a calendar note

1. Once in the Calendar menu, scroll with

to the desired date.

2. Press Options, scroll to Make a note and press Select.

3. Scroll to one of the following note types and press Select. For entering letters and numbers, see

’Storing names and numbers’ on page 41.

• Meeting (

Enter the note and press OK. Then enter the time and press OK.

• Call (

)

Enter the desired phone number (or search for it from the phone book) and press OK. Then enter the

desired name (or search for it from the phone book) and press OK. Repeat this with the time.

• Birthday (

)

Enter the person’s name and press OK, then repeat the same with the date of birth and year of birth

(optional). If you enter the year of birth, the note shows the person’s age after the name.

•

Memo (

Enter the note and press OK.

4. Scroll with or to the desired alarm option (except fot the Memo) and press Select.

The presence of a tone alert is indicated by when you view the notes.

Tip: When you are in the day view or week list, you can quickly go to today’s view by

pressing

)

When the phone alarms for a note

The phone flashes its lights, beeps, and displays the note. With a Call note on the display, you can call

the displayed number by pressing

. To stop the alarm and view the note, press View, to stop the

alarm without viewing the note, press Exit.

I Task journal (Menu 9)

The Task journal is like a timecard used for keeping track of working times and

costs, and also for storing various comments. The Task journal uses time and

date formats of Calendar (see page 92) and Real-time clock (see page 103).

Note: You can send Task journal data to another phone as a text message or transfer data to a

compatible PC via a cable or using infrared function.

Note: Your phone must be switched on to use this function. Do not switch on the phone

when the use of a wireless phone is prohibited or when it may cause interference or danger.

After selecting Task journal (Menu 9) you have the following options:

• Restart, Add new, Find, Edit, Erase and History

If the Task list is empty, the only option to view and to select is Add new.

Note: If the phone is switched off during an active task, the task is not stopped; task journal timer

continues to run in the background. Also, if the phone is powered off due to a low battery, the task

journal timer continues to run as long as there is enough power to keep the phone’s main clock

running.

Restart (Menu 9-1)

With this submenu you can restart the existing task. If the Task list is empty this option is not available.

• Select Restart, scroll to the desired task and press Start.

The task is started and a new entry is created.

The Active work view is displayed.

Add new (Menu 9-2)

This submenu allows you to add a task to the Task journal.

1. Key in the name or other identification data after Title: and Customer:

Maximum length of an entry is 20 characters.

2. Confirm the given entries with OK.

The first entry of the new task is started and the phone moves to the active work view.

Note: If there is no free space in the memory, Memory full. Erase old task? is displayed.

Find (Menu 9-3)

With this submenu you can search for previous tasks by title, by customer .

If you select By title, you need to enter the name or a part of it for the search operation. Or you can

press OK to get the list of tasks.

The first matching item is highlighted. If there are no matches, the list starts with the closest match.

• If the search is done By title the remaining tasks appear in alphabetical order below the first one.

• If the search is done By customer only the tasks of a particular name are shown.

Edit (Menu 9-4)

With this submenu you can edit both the title and customer name of a particular task. After you have

chosen this submenu the phone displays the Task list, and you can select the item you wish to edit.

Erase (Menu 9-5)

There are two different ways to erase a task:

• One by one deletes one item at the time from the Task list.

• All tasks deletes all the existing tasks at once.

Both deletions must be verified with OK.

History (Menu 9-6)

Within this function you can view the history of tasks.

1. Select History from the Task journal main menu.

2. Select from the Task list the task you wish to examine.

After a particular task is selected, the phone turns to a History view. The History view contains the

following data:

• Title of a particular job or task

• Customer name

• Created

• Entries

• Total time

• Total wages

• Total materials

• Total costs

• Comments

If you need more detailed information or if you want to send data to another phone, or erase

something, press Options in this view.

Details

This view shows each entry of a particular item in chronological order. The date of entry, the number of

the current entry and the total number of entries are shown at the top of the display. Other

information includes:

• Task time

• Wages

• Materials

• Costs

You see the next entry for the current item if scrolling with

. More detailed information on

tasks can be found, if you press Options.

Timetable

You see the working times in detail by selecting Timetable.

Started

Paused

and / or

Started

Stopped

View wages

You see the wages in detail by selecting View wages. The phone displays the following information:

Hours

Rate

Total

View materials

You see the costs of used materials in detail by selecting View materials.

The following view with the entered information appears:

Amount

Cost

Total

Each of these views contains information about one entry only.

View comments

You can read any comments written for the current entry. If you select Options you can edit given

comments, send them to another phone as a text message .

Send as SMS

With this option you can send history data from the Task journal to another phone as a text message.

The content of data depends on where in the Task journal the sending option was selected.

Transferring Task journal data to a PC using a cable

If you use a cable for transferring Task journal data:

• Connect the DLR-3P cable to the serial port on the back of a compatible PC.

• Connect the DLR-3P cable to your phone.

Start using the Task journal PC-connectivity program available through the Nokia website

(www.nokia.com).

Note: Making or answering phone calls during a PC connection is not recommended as it

might disrupt the operation.

Transferring Task journal data to a compatible PC via infrared

You can also transfer Task journal data from your phone to a compatible PC via infrared function with

the help of the Task journal PC-connectivity program which is available through the Nokia website

(www.nokia.com). However, it is not possible to receive Task journal data through the infrared. See

’Infrared (Menu 12)’ on page 109 for more information.

Active work view

Active work view is shown when a task is active in the Task journal. Likewise, the timing starts in this

view.

The active work view contains the following information:

• title of your task

• starting time of the current entry

• duration of the current entry

• total work time

If you select Options you can pause or stop the task, add cost or comment,

find another task or view the history of a task.

Pause task

When the task is stopped by using Pause you can resume it later. The text Paused blinks on the display

and the timer stops, but it is not cleared.

To carry on with the same task, Select Options and then Continue.

100

After pausing the task you can also stop the task, add cost information or a comment to it or view its

history.

Stop task

1. Press Stop if you wish to end the task.

2. Confirm with OK.

This stops the timer and ends the current entry. The task is saved.

The summary of this entry is displayed:

• Duration

• Wages

• Materials

• Comments

If you select Options you can still add cost or a comment, restart the task or send the data to another

phone. If any information is added to the entry, the phone returns to the updated summary view

afterwards.

Add cost

You can also enter cost information in the active work view.

The maximum entry is 9 digits with two decimals.

1. Select Wages and the text Hourly wage: appears.

2. Key in the wage.

3. Confirm the value with OK.

The entered data can be viewed on the display:

101

• Hours for showing the duration of the current entry up to that specific moment

• Rate for showing the hourly wage

• Total for showing the current summary of wages

By selecting Material you can add material costs to total costs.

1. Enter a name or other identification of the part in question after Material id: and press OK.

2. Give the amount of used parts.

3. Key in the price of one piece after Price: and press OK.

The following information is displayed:

• Amount

• Cost

• Total for showing the summary of costs in the current addition

Add comment

You can store comments or make notes by selecting Add comment. The length of the comment is

limited to 40 characters.

Press Clear if you want to delete the written text.

Press Save if you want to keep the text.

102

I Clock (Menu 10)

Stopwatch (Menu 10-1)

Note: Your phone must be switched on to use this function. Do not switch on the phone

when the use of a wireless phone is prohibited or when it may cause interference or danger.

You can measure time with your phone using the stopwatch. With the stopwatch it is possible to

measure time, take intermediate times or lap times.

If you press

during the stopwatch timing, your phone returns to the standby mode and the

timing moves to the background. You can use the phone as usual.

The timing is also moved from the display to the background if there is:

• incoming call

• battery low note

• recharge battery note

• other types of special messages

Note: Using the stopwatch consumes the battery and the phone’s operating time will be reduced.

Therefore, to maximize the operating time of your phone, it is recommended not to let it run in the

background (i.e. when performing other operations with your phone) when you don’t need it.

103

Split timing

You can start measuring time by selecting Menu-Clock-Stopwatch-Split

timing. The phone displays an initial state, and the initial value is shown

in big digital numbers 00:00:00:0.

1. Press Start and the clock starts running.

2. Press Stop when you want to finish.

When timing is stopped, the result is shown on the display.

Note: If timing exceeds the value of 99:59:59:9, the time on the display changes to 00:00:00:0 and the

clock keeps running.

By pressing Options you can restart, save, reset and exit the timing function. If you start the timing

anew by pressing Start, time keeps running cumulatively instead of restarting at zero. If you select

Exit, the phone returns to the standby mode. If the stopwatch was not reset, there is an active item

Show last on the selection list.

Intermediate times

1. Press Start.

2. Press Split when you want to see an intermediate time.

Time keeps running as usual but also the newest intermediate time is displayed under the running

time.

Intermediate times are shown in smaller font than the running time. Three intermediate times can be

viewed simultaneously with the running time. If there are more of them, you can view them by

scrolling with

. Timing stops when you press Stop.

104

Lap timing

This function is started by selecting Lap timing from the Stopwatch main

menu.

1. Press Start and he clock starts running.

2. Press Lap when you want to see the lap time.

By pressing Lap, timing stops and then restarts immediately at zero. The

newest lap time is displayed under the running time.

Three lap times can be viewed simultaneously with running time on the phone’s display. Scroll

with

to view any further lap times. When you press Stop timing stops and the total time is

shown as a result.

Note: If you select Split timing or Lap timing from the Options list while there is timing going on in

the background, the confirmation note Discontinue previous? appears.

Saving or resetting times

1. Press Options and then select Save from the list.

2. Key in the name for the time value after Name:

The maximum number of characters is 10.

3. Confirm the given name with OK.

To reset the times: After selecting Reset from the list of options, confirm the resetting with OK.

The phone returns to the initial state where the initial value 00:00:00:0 is shown.

Viewing times

You can see saved times by selecting View times. The named time sets are listed on the display.

105

If you select a particular time set, you can view its times. Intermediate and lap times are displayed in a

smaller font underneath the final time. Scroll with or to view any further times.

In this view, you can erase times by selecting Options and then Erase times.

Deleting times

You can delete times from the stopwatch memory by selecting Erase times from the Stopwatch main

menu. It is also possible to erase times by selecting this function under Options.

You can erase times one by one or all times at once. In either way the phone still prompts you to

confirm the deletion with OK.

Note: If you try to erase a time when there are no more time sets, the phone displays the note

Stopwatch memory empty.

Stopwatch memory

The memory reserved for stopwatch times is limited. The maximum number of stopwatch times is 250.

The stopwatch memory stores its content also when the phone’s power is switched off.

Alarm clock (Menu 10-2)

You can set the phone to alarm at a specified time within the Alarm clock menu (Menu 10-2). To

access this submenu, press Menu, then select first Clock, then Alarm clock and press Select.

The alarm clock uses the time format set for the clock: i.e.12-hour or 24-hour format. In the standby

mode, the

indicator in the header line shows that the alarm is set to On. You can switch the phone

off and the alarm clock will still work.

106

When the alarm expires:

The phone will sound an alert tone. When the phone is alerting, Alarm! is also shown and the phone’s

lights flash.

Press Stop to stop the alarm. If you let the phone alarm for a minute or press Snooze, the alarm stops

for a few minutes and then resumes.

Note: If the alarm time expires while the phone is switched off, the phone starts alarming. If you press

Stop, the phone asks if you want to activate the phone for calls. Press Yes to register or No to keep the

phone switched off.

Note: Do not switch on the phone when the use of a wireless phone is prohibited or when it

may cause interference or danger.

Time settings (Menu 10-3)

The phone is provided with a clock. The current time is shown on the display if you have selected Show

clock option. The clock will not show if you are in the phone book or in menu functions.

Note: Your phone must be switched on to use this function. Do not switch on the phone

when the use of a wireless phone is prohibited or when it may cause interference or danger.

Show clock / Hide clock (Menu 10-3-1)

With this menu you can either show or hide the clock.

Set the time (Menu 10-3-2)

1. Once in Menu 10-3-2, press Select.

2. Enter the present time and press OK.

107

Time format (Menu 10-3-3)

This submenu allows you to select the 12-hour or 24-hour time format. Scroll to either format and

press OK.

The clock also serves the following functions: Messages (Menu 1), Call register (Menu 2), Alarm clock

(Menu 10-2), Calendar (Menu 8) and Task journal (Menu 9).

Note: If the battery is removed from the phone for a long time, you may need to set the time again.

I Sound meter (Menu 11)

The Sound meter is not intended for professional use.

It is rather a fun feature providing you with the means to measure the

estimated noise level of your surroundings.

Note: Your phone must be switched on to use this function. Do not switch on the phone

when the use of a wireless phone is prohibited or when it may cause interference or danger.

The phone displays a vertical meter bar that shows the noise level

graphically. There is also a numerical presentation of the sound level. The

peak value is shown in a frame on the top and the current value is presented

underneath. The unit of these numerical values is the decibel (dB).

Note: It is not possible to measure the estimated noise level of a call in

progress.

Please note that the Sound meter in your phone is NOT a professional

precision instrument. It can only display an approximation of the real dB level.

The Sound meter of your phone measures the sound level in frequencies between 300Hz and 3400Hz,

meaning approximately the frequencies that are most important for the speech intelligibility and are

108

conveyed through the GSM system in a normal call. Noise beneath and above those frequencies will

not be measured.

When you press Options you get a list of three:

• Reset

• Hold

• Dynamic

With Reset you can reset the peak value.

With Hold both values are shown but the peak value is updated only when the current noise level is

greater than the current peak value.

With Dynamic both values are shown but the peak value is valid only for 5 seconds.

Note: Using the sound meter consumes the battery and the phone’s operating time will be reduced

considerably. It is recommended not to use the sound meter when not needed.

I Infrared (Menu 12)

In this menu you can set up your phone to receive data through its infrared

(IR) port. To use an IR connection, the device with which you want to

establish a connection must be IrDA compliant. You can send or receive data such as business cards

(names and numbers stored in the phone book) and calendar notes to or from a compatible phone or

data device (for example, a computer) via the IR port of your phone.

You can send Task journal data via the IR port to a compatible PC with the help of the Task journal PC-

connectivity program which is available through the Nokia website (www.nokia.com). It is not possible

109

to send Task journal data to another phone via infrared, though. You can not receive Task journal data

from a PC.

Note: Your phone must be switched on to use this function. Do not switch on the phone

when the use of a wireless phone is prohibited or when it may cause interference or danger.

To send and receive data via IR

1. Ensure that the IR ports of the sending and receiving devices are pointing at each other and that

there are no obstructions between the devices. The preferable distance between the two devices in

an infrared connection is one meter at most.

2. When receiving data via IR, activate the IR port of your phone by entering the Infrared menu (Menu

12).

3. The user of the sending phone selects the desired IR function to start data transfer.

If data transfer is not started within two minutes of activation of the IR port, the connection is

cancelled and has to be started again.

Note: Your phone is a Class 1 Laser Product.

Checking the status of an IR connection

The status of an IR connection is indicated by

When is shown continuously, the IR connection is activated and your phone is ready to send and

receive data via its IR port.

When

is not shown, no IR connection exists.

blinks, your phone is trying to connect to the other device or a connection has been lost.

110

I Mobile Internet Services (WAP)

Various WAP (Wireless Application Protocol) service providers on the

Internet maintain web pages specifically designed for mobile phones,

offering services such as banking, news, weather reports, flight times, etc.

Note: Check the availability of WML- based services, pricing and tarifs with your network operator

and/or the WAP service provider. Service providers will also give you instructions on how to use their

services.

These web pages use a Mark-Up language called WML (Wireless Mark-Up Language). Web pages using

the Mark-Up language HTML (Hyper Text Mark-Up language) cannot be viewed on your phone.

Note: Your phone must be switched on to use this function. Do not switch on the phone

when the use of a wireless phone is prohibited or when it may cause interference or danger.

You can access WAP services via the Services menu (Menu 13) after you have stored the settings

required to access a service.

Setting up the phone for the WAP services

Before you can access WAP services you need to store the required connection settings of a WAP

service, from which you can visit the WAP pages they offer.

You get the connection settings from WAP service providers. They may send you the settings as a text

message or you should key in the settings manually.

You can store the connection settings under one of the five sets in your phone. Each connection set

contains the required settings for one WAP service and you need to store the settings for each WAP

service only once.

111

Saving the settings received as a text message

When you receive the connection settings as a text message, you will see the message Service settings

received on your display.

• To store the received settings, press Options, and scroll to Save.

• If you want to view the settings first, press Options, and scroll to View. The name and the

homepage address of the received setting are displayed. Press Save to store the settings or Back to

return to the option list.

Keying in the settings manually

Note: You get the settings from WAP service providers. They will give you more specific information.

1. Press Menu; scroll to Services and press Select.

2. Scroll to Settings and press Select.

3. Press Select when Connection settings is displayed.

4. Scroll to a connection set and press Options.

5. Scroll to Edit and press Select.

The settings are:

• Homepage - write the homepage address of the connection set

• Connection type - select Continuous or Temporary

• Connection security - select On or Off.

Note: When the connection security is on, the phone tries to use a secure line when a service is

activated. If a secure line is not available, the connection will not be made. If you wish to

connect anyway, with a non-secure connection, you must set the connection security to Off.

112

• Bearer - select SMS or Data. The speed and cost differs according to the bearer you select. For

pricing and more information, contact the WAP service provider.

Key in the settings listed below as instructed by the service provider.

SMS selected as the bearer

Server number

Service number

Data selected as the bearer

Dial-up number

IP address

Authentication type - select Secure or Normal

Data call type - select Analogue or ISDN. You can select a fixed data call type which also effects

the data call speed. When ISDN is selected, the data call speed includes only the options 9600

and 14400 bps.

Data call speed - Automatic selects the data call speed automatically but this is not possible if

ISDN has been selected as the data call type. The speed of the data call depends on the service

provider.

User name

Password

Editing the settings

There is space for five connection sets in your phone. To add a new set you have to overwrite an

existing stored set if the five sets are already being utilized. By selecting the option Rename, you can

rename the connection set.

113

You can choose whether images are shown or not and how the text is shown on the display when you

are browsing a WAP page. In some cases WML pages may have text wrapping set to off (that is, lines

are cut when there is no more space on the line) as a default; select On to see the whole text.

1. Press Menu, scroll to the Services and press Select.

2. Scroll to Settings and press Select.

3. Scroll to Appearance settings and press Select.

4. Scroll to Text wrapping or Show images and press Select.

5. Select On or Off for Text wrapping and Yes or No for Show images.

Accessing WAP pages

Once you have stored all the required connection settings you can access WAP pages. There are three

different ways of accessing WAP pages:

• Opening a homepage (by selecting Home in the options of the Services menu)

• Selecting a bookmark (by selecting Bookmarks in the options of the Services menu)

• Entering the address of a WAP page (by selecting Go to address in the options of the Services

menu)

First, you need to activate the connection set of the WAP service you want to use. Only one set can be

activated at a time.

Activating a connection set

1. Press Menu, scroll to Services and press Select.

2. Scroll to Settings and press Select.

114

3. Press Select when Connection settings is displayed.

4. Scroll to the desired connection set and press Options. Then scroll to Activate and press Select.

Accessing a WAP page by opening the homepage

1. When you are in the standby mode, press Menu, scroll to Services and press Select.

2. To connect to the homepage of the service, press Select when Home is highlighted.

Bookmarks

You can save the addresses of up to 15 of your favourite or most frequently used WAP pages in the

phone’s memory.

Adding bookmarks

1. Press Menu, scroll to Services and press Select.

2. Scroll to Bookmarks and press Select

3. Press Options, then press Select when Add bookmark is highlighted.

4. Enter the address of the desired service and press OK. Then enter a title for the service and press OK

Tip: You can also add a bookmark while browsing. First press Options and scroll to Bookmarks and

press Select. Then press Options and select Save bookmark and press Select.

Accessing a WAP page by using the bookmarks

1. Press Menu, scroll to Services and press Select.

2. Scroll to Bookmarks and press Select.

3. Scroll to the desired bookmark and press Options. To connect to the service, scroll to Go to and

press Select.

115

Note: A bookmark may become associated with the connection setting that you used when it was first

added. If the bookmark does not work (the text Check service settings may be displayed), you may

need to activate another connection set.

Accessing a WAP page by entering its address

1. Press Menu, scroll to Services and press Select.

2. Scroll to Go to address and press Select.

3. Key in the address (use the key

to enter special characters) of the WAP page you want to visit

and press OK.

Note: It is not necessary to enter the prefix http://; it will be added automatically. If you are using a

protocol other than http (such as ftp), you will have to enter the prefix.

Viewing WAP pages

When you are connected to the homepage of a WAP service, follow the text guides on the phone’s

display.

Keys used in WAP navigation

• Press

, e.g. to select a link.

and

to disconnect from a WAP page and to quit browsing.

• Use the scroll keys

• Press

to view a WAP page.

• Press the keys

to enter letters and numbers and the key

to enter special

characters.

• Press the right selection key

e.g. to go back to the previously accessed WAP page.

e.g. to display the list of options.

• Press the left selection key

116

While you are browsing a service, pressing Options displays the currently available option list.

Scroll to the desired option and press Select. Here are some of the possible options which may

become available while browsing:

Home (to go to the homepage), Reload (to reload the page), Select (to select a link), Back (to go

back to the previously accessed WAP page), Appearance settings (to set the settings for the text

and images), Bookmarks (to add a bookmark), Use number (to extract numbers from the service

you are using or from the page that is displayed), Go to address (to enter the address of the WAP

page you wish to access), Clear the cache (to clear the cache memory of the phone), Security info

(to see whether the connection is secured or not) and Exit (to quit browsing).

Emptying the cache

The information or services you have accessed are stored in the cache memory of the phone. A cache is

a buffer memory that is used to store data temporarily.

Note: If you have tried to access or have accessed confidential information requiring

passwords (for example, your bank account), empty the cache of your phone prior to each

use to secure the confidentiality

1. Press Menu, scroll to Services and press Select.

2. To empty the cache memory of your phone, scroll to Clear the cache and press Select.

117

Security certificates

For using some services, you need a security certificate. A security certificate is used to enable secure

communications with a WAP gateway or a server. The certificates are used to check signatures of WAP

gateway or server certificates and can be downloaded during browsing.

You can only be sure of the correct identity of a WAP gateway or a server when the signature and the

period of validity of a WAP gateway or a server certificate have been checked.You will be notified on

the phone’s display if the identity of the WAP server or gateway cannot be verified, the WAP server or

gateway is not authentic or if you do not have the right security certificate in your phone. After you

have downloaded the required security certificate from the Internet, you can view the certificate and

then save or delete it. If you save it, the certificate is added to the list of security certificates in the

Services menu.

To view the list of security certificates:

1. Press Menu, scroll to the Services menu and press Select.

2. Scroll to Settings and press Select.

3. Scroll to Security certificate and Select.

Note: When the security icon is displayed, the data transmission between the phone and the WAP

gateway or a server (identified by the IP address in the Connection settings) is encrypted and secure.

However, the security icon does not indicate that the data transmission between the gateway and the

content server (place where the requested resource is stored) is secure. It is up to the service provider

to secure the data transmission between the gateway and the content server.

118

I SIM services (Menu 14)

In addition to the functions available in the phone, your SIM card may

provide additional services that you can access via the menu 14. Menu 14 is

shown only if it is supported by your SIM card. The name and contents of the menu depend entirely on

the services available.

For availability, rates and information on using the SIM services, contact your SIM card vendor, e.g.

your network operator, service provider or other third-party vendor.

You can set the phone to show you the confirmation messages sent between your phone and the

network when you are using the SIM services by selecting the option Asked within the menu 4-2-6

(Confirm SIM service actions).

Note: Accessing these services may involve sending a text message (SMS) or making a phone call for

which you may be charged.

119

7. Data and fax communications

Your phone allows you to transfer data to other devices when it is connected to a compatible PC via an

IR connection or a serial cable.

To send and receive e-mail and faxes, connect to computers and access the Internet, you also need the

appropriate data and fax communications software installed on your computer. You can use the Nokia

6250 with a variety of commercially available data and fax communications applications.

For using your phone as a modem, you first need to install it as a modem. The path to the detailed

installation instructions and the required system files can be found through the Nokia website

(www.nokia.com).

I Connecting your phone to a computer

Installing communications applications and modem drivers

1. Ensure that a data communication application is correctly installed on your PC. For information on

how to install an application, please refer to that application’s documentation.

2. Install the necessary drivers on your PC. For instructions, see the Nokia website (www.nokia.com) to

find the modem setup application.

For troubleshooting, please refer to the Readme.txt file which can be found on the Nokia website.

Using communications applications

Do either of the following:

120

If you use IR:

• Activate the IR connection of your phone by selecting Menu 12.

• Make sure that the infrared port of the phone faces the infrared port of the PC.

If you use a cable:

• Connect the DLR-3P cable to the serial port on the back of your PC.

• Connect the DLR-3P cable to your phone.

Note: Both the cable and the connector must be dry.

Start using the data communication application on the PC. For information on how to use the

application, please refer to that application’s documentation.

Note: Making or answering phone calls during a PC connection is not recommended as it

might disrupt the operation.

For better performance during data calls, place the phone on a stationary surface with the

keypad facing downward. Do not move the phone by holding it in your hand during a data

call.

121

8. Reference information

I Access codes

You can use the access codes described in this section to avoid unauthorised use of your phone and

SIM card.

The access codes (except PUK, PUK2 and keylock codes) can be changed by using Menu 4-5-6. See the

following section.

Security code (5 digits)

The security code can be used to avoid unauthorised use of your phone. The factory setting for the

security code is 12345. To avoid unauthorised use of your phone, change the code in the Settings

menu, see ’Security level (Menu 4-5-5) on page 86 and ’Change of access codes (Menu 4-5-6)’ on page

87. Keep the new code secret and in a safe place separate from your phone.

PIN code (4 to 8 digits)

The PIN (Personal Identification Number) code protects your SIM card against unauthorised use. The

PIN code is usually supplied with the SIM card. When the PIN code request is enabled (Menu 4-5-1),

the code is requested each time the phone is switched on.

PIN2 code (4 to 8 digits)

The PIN2 code, supplied with some SIM cards, is required to access some functions, such as charging

unit counters. These functions are only available if supported by your SIM card.

122

PUK code (8 digits)

The PUK (Personal Unblocking Key) code is required to change a blocked PIN code. The PUK code may

be supplied with the SIM card. If not, contact your local service provider for the code. If you lose the

code, contact your service provider.

PUK2 code (8 digit)

The PUK2 code, supplied with some SIM cards, is required to change a blocked PIN2 code. If you lose

the code, contact your service provider.

Keylock code (4 digit)

You can use keylock code (Menu 4-3-2) to prevent the unauthorised use of your phone. The default

code is 0000.

Note: Before activating the keylock code make sure that the PIN code request is also set on.

Barring password

The barring password is needed when using the ‘Call Barring’ function. You obtain the password from

your service provider.

I Battery information

Charging and discharging the battery

• Never charge the phone when the bottom connector or phone itself is wet or damp.

• Do not charge the phone in wet and damp conditions.

123

• Your phone is powered by a rechargeable battery.

• Note that a new battery's full performance is achieved only after two or three complete charge and

discharge cycles.

• The battery can be charged and discharged hundreds of times but it will eventually wear out. When

the operating time (talk-time and stand-by time) is noticeably shorter than normal, it is time to buy

a new battery.

• Use only batteries approved by the phone manufacturer and recharge your battery only with the

chargers approved by the manufacturer.

• When a charger is not in use, disconnect it from the power source. Do not leave the battery

connected to a charger for longer than a week, since overcharging may shorten its life. If left

unused a fully charged battery will discharge itself over time.

• Temperature extremes will affect the ability of your battery to charge: allow it to cool down or

warm up first.

• When the battery is running out of power and only few minutes of talk time remain, a warning tone

is heard and Battery low is briefly displayed. When no more talk time is left, Battery empty is

displayed and a warning tone is sounded and the phone switches itself off.

Using the batteries

• The battery must be kept dry.

• Use the battery only for its intended purpose.

• Never use any charger or battery which is damaged or worn out.

• Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object (coin,

clip or pen) causes direct connection of the + and - terminals of the battery (metal strips on the

124

back of the battery) for example when you carry a spare battery in your pocket or purse. Short-

circuiting the terminals may damage the battery or the connecting object.

• Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will

reduce the capacity and lifetime of the battery. Always try to keep the battery between 15ºC and

25ºC (59 F and 77 F). A phone with a hot or cold battery may temporarily not work, even when the

battery is fully charged. Li-Ion batteries performance is particularly limited in temperatures below -

0ºC (32 F).

• Do not dispose of batteries in a fire!

Batteries must be recycled or disposed of properly.

Must not be disposed of in municipal waste!

125

Care and maintenance

Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions

below will help you to fulfill any warranty obligations and to enjoy this product for many years. When using your

phone, battery, charger OR any accessory:

•

Keep it and all its parts and accessories out of small children's reach.

Try to keep it dry. Precipitation, humidity and liquids contain minerals that will eventually corrode the

connectors.

•

Do not store your phone in dusty, dirty areas as this may cause damage to some parts of the phone.

Do not store it in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and

warp or melt certain plastics.

•

Do not store it in cold areas. When the phone warms up (to its normal temperature), moisture can form inside

the phone, which may damage the electronic circuit board.

•

Do not open the water resistant backcover if the phone is wet or dirty.

Do not attempt to open it except as instructed. Non-expert handling of the device may damage it.

Do not intentionally drop, knock or shake it. Rough handling is never recommended or beneficial for your

phone’s functionality.

•

Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it. Wipe it with a soft cloth slightly

dampened in a mild soap-and-water solution.

•

Do not paint it. Paint can clog the device’s moving parts and prevent proper operation.

If the phone, battery, charger or any accessory are not working properly, take them to your nearest qualified

service facility. The personnel there will assist you, and if necessary, arrange for service.

126

Important safety information

I Traffic safety

Do not use a hand-held telephone while driving a vehicle. If using a hand-held phone park the vehicle before

conversing. Always secure the phone in its holder; do not place the phone on the passenger seat or where it can

break loose in a collision or sudden stop.

The use of an alert device to operate a vehicle’s lights or horn on public roads is not permitted.

Remember road safety always comes first!

I Operating environment

Remember to follow any special regulations in force in any area and always switch off your phone whenever it is

forbidden to use it, or when it may cause interference or danger.

When connecting the phone or any accessory to another device, read its user guide for detailed safety instructions.

Do not connect incompatible products.

As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the

equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal

operating position (Held to your ear.).

Do not point the infrared beam at anyone’s eye or allow it to interfere with other infrared devices.

I Electronic devices

Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic

equipment may not be shielded against the RF signals from your wireless phone.

127

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of 20 cm (6 inches) be maintained between a

hand-held wireless phone and a pacemaker to avoid potential interference with the pacemaker. These

recommendations are consistent with the independent research by and recommendations of Wireless Technology

Research.

Persons with pacemaker:

•

Should always keep the phone more than 20 cm (6 inches) from their pacemaker when the phone is switched

on;

•

Should not carry the phone in a breast pocket;

Should use the ear opposite the pacemaker to minimize the potential for interference.

If you have any reason to suspect that interference is taking place, switch off your phone immediately.

Hearing aids

Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want

to consult your service provider.

Other medical devices

Operation of any radio transmitting equipment, including cellular phones, may interfere with the functionality of

inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to

determine if they are adequately shielded from external RF energy or if you have any questions.

Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so.

Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (e.g.

electronic fuel injection systems, electronic anti-skid (anti-lock) braking systems, electronic speed control systems,

air bag systems).

128

Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer

of any equipment that has been added to your vehicle.

Posted facilities

Switch your phone off in any facility where posted notices so require.

I Potentially explosive atmospheres

Switch off your phone when in any area with a potentially explosive atmosphere and obey all signs and

instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.

Users are advised to switch off the phone when at a refuelling point (service station). Users are reminded of the

need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas),

chemical plants or where blasting operations are in progress.

Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on

boats; chemical transfer or storage facilities; vehicles using liquified petroleum gas (such as propane or butane);

areas where the air contains chemicals or particles, such as grain, dust or metal powders; and any other area where

you would normally be advised to turn off your vehicle engine.

I Vehicles

Only qualified personnel should service the phone, or install the phone in a vehicle. Faulty installation or service

may be dangerous and may invalidate any warranty which may apply to the unit.

Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its

parts or accessories.

For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects,

including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment

area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

129

Switch off your phone before boarding an aircraft. The use of wireless telephones in an aircraft may be dangerous

to the operation of the aircraft, disrupt the wireless telephone network and may be illegal.

Failure to observe these instructions may lead to suspension or denial of telephone services to the offender, or legal

action or both.

I Emergency calls

IMPORTANT! This phone, like any wireless phone, operates using radio signals, wireless and landline

networks as well as user-programmed functions which cannot guarantee connection in all conditions.

Therefore, you should never rely solely upon any wireless phone for essential communications (e.g.

medical emergencies).

Remember, to make or receive any calls the phone must be switched on and in a service area with adequate cellular

signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network

services and/or phone features are in use. Check with local cellular service providers.

To make an emergency call:

1. If the phone is not on, switch it on.

Some networks may require that a valid SIM card is properly inserted in the phone.

2. Press

as many times as needed (e.g. to exit a call, to exit a menu, etc.) to clear the display.

3. Key in the emergency number for your present location (e.g. 112 or other official emergency number).

Emergency numbers vary by location.

4. Press the

key.

If certain features are in use (Keypad lock, Fixed Dialling, etc.), you may first need to turn those features off before

you can make an emergency call. Consult this document and your local cellular service provider.

When making an emergency call, remember to give all the necessary information as accurately as possible.

Remember that your wireless phone may be the only means of communication at the scene of an accident - do not

cut off the call until given permission to do so.

130

Technical specifications

Weight:

•

174g

Dimensions (min.- max):

•

142 x 50-58 x 23-27 mm, 159 cc

Talktime:

•

3 h 15 min - 5 h 50 min

Standby time:

•

72 h - 336 h

Durability:

• The Nokia 6250 can survive a drop up to 3 metres and immersion for up to 1 minute in water up to

0.5 m deep.²

Display:

High resolution, illuminated, full-graphics dynamic display, adjustable contrast, 96 x 60 pixels,

30.6mm x 24.1 mm, 7-bar battery and signal status indicators

Dual band operation:

EGSM 900, GSM 1800 and GSM 900/1800 dual-band networks. Automatic switching between the

bands.

1. Variation in operation times will occur depending on SIM card, network settings and usage.

2. Water may not be warmer than 50°C.

131

LIMITED MANUFACTURER’S WARRANTY

PART OF EUROPE & AFRICA REGION

This limited warranty shall apply in part of Nokia Mobile

nature, spillage of food or liquid, influence from chemical

Phones’ Europe & Africa Region unless a local warranty exists.

Nokia Mobile Phones Ltd ("Nokia") warrants that this NOKIA

product ("Product") is at the time of its original purchase free of

defects in materials, design and workmanship subject to the

following terms and conditions:

products or other acts beyond the reasonable control of

Nokia (including but not limited to deficiencies in

consumable parts, such as batteries which all by their

nature have a limited lifetime, and breakage or damage to

antennas) unless the defect was caused directly by defects

in materials, design or workmanship;

1. This limited warranty is given to the end-purchaser of the

Product ("Customer"). It shall neither exclude nor limit i)

any mandatory statutory rights of the Customer or ii) any

of the Customer’s rights against the seller/dealer of the

Product.

ii. Nokia or its authorized service company was not notified

by the Customer of the defect within thirty (30) days after

the appearance of the defect within the warranty period;

iii. the Product was not returned to Nokia or its authorized

service company within thirty (30) days after the

2. The warranty period is twelve (12) months from the date

on which the first Customer purchased the Product. In case

appearance of the defect within the warranty period;

of a subsequent purchase or other change of owner/user, iv. the Product serial number, the accessory date code or the

such warranty period shall continue for the remaining part

of the twelve (12) month period and otherwise remain

unaffected. This limited warranty is only valid and

enforceable in the following countries: Bosnia, Bulgaria,

IMEI number has been removed, erased, defaced, altered or

is illegible;

v. the defect was caused by a defective function of the

cellular network;

Croatia, Cyprus, the Czech Republic, Estonia, any member vi. the defect was caused by the fact that the Product was

state of the European Union, Hungary, Iceland, Israel,

Latvia, Lithuania, Macedonia, Malta, Norway, Poland,

Romania, the Slovak Republic, Slovenia, Switzerland and

Turkey.

used with or connected to an accessory not manufactured

and supplied by Nokia or used in other than its intended

use;

vii. the defect was caused by the fact that the battery was

short-circuited or seals of the battery enclosure or cells

were broken or show evidence of tampering or the battery

was used in equipment other than for which it has been

specified; or

viii. the Product software needs to be upgraded due to changes

in cellular network parameters.

7. To claim this limited warranty the Customer shall present

either i) a legible and non-modified original warranty card

which clearly indicates the name and address of the seller,

the date and place of purchase, the product type and the

IMEI or other serial number or alternatively ii) a legible and

non-modified original purchase receipt which contains the

same information, if such purchase receipt is presented to

the seller/dealer of the Product.

3. During the warranty period Nokia or its authorized service

company will repair or replace, at Nokia’s sole discretion, a

defective Product. Nokia will return the repaired Product or

another Product to the Customer in good working

condition. All parts or other equipment for which

replacements have been provided shall become the

property of Nokia.

4. A repaired or replaced Product will not be given a

prolonged or renewed warranty period.

5. This limited warranty will not cover painted covers or other

similar personalized parts. In all cases that require

unlocking or locking of an operator SIM-lock, Nokia will

first direct the Customer to such operator for unlocking or

locking of the operator SIM-lock before repairing or

replacing the Product.

8. This limited warranty is the Customer's sole and exclusive

remedy against Nokia and Nokia's sole and exclusive

liability against the Customer for defects or malfunctions

of the Product. This limited warranty replaces all other

warranties and liabilities, whether oral, written, (non-

mandatory) statutory, contractual, in tort or otherwise.

Nokia is in no event liable for any incidental, consequential

or indirect damage, costs or expenses. Neither is Nokia in

any event liable for any direct damage, costs or expenses, if

the Customer is a legal person.

6. This limited warranty shall not apply to deteriorations due

to normal wear and tear. This limited warranty shall further

not apply if:

i. The defect was caused by the fact that the Product has

been subjected to: use in contradiction with the owner's/

user manual, rough handling, exposure to moisture,

dampness or extreme thermal or environmental conditions

or rapid changes in such conditions, corrosion, oxidation,

unauthorized modifications or connections, unauthorized

opening or repair, repair by use of unauthorized spare

parts, misuse, improper installation, accident, forces of

9. Any change or amendment to this limited warranty

requires Nokia's prior written consent.

■ WARRANTY CARD

FILL IN WITH BLOCK LETTERS

Purchaser’s Name:

__________________________________________________

Address:

__________________________________________________

Country:

__________________________________________________

Phone:

__________________________________________________

Date of Purchase (dd/mm/yy):

|__|__| /|__|__| /|__|__|

Product Type (on phone type label under battery):

|__|__|__| − |__|__|__|

Product Model (on phone type label under battery):

|__|__|__|__|

Phone Serial No (on phone type label under battery):

|__|__|__|__|__|__|/|__|__| /|__|__|__|__|__|__|/|__|

Place of Purchase:

__________________________________________________

Store Name:

__________________________________________________

Store Address:

__________________________________________________

Stamp

ITEM

IMEI

West Bend L5613B User Manual
Transcend Information Memory Stick Pro MS Pro User Manual
Sony DRX 510UL User Manual
Snapper 1692210 1692231 1692353 9000100 User Manual
SmartDisk FireFly USBFF20P User Manual
Seagate ST480FP0021 User Manual
Sanyo scp8300 User Manual
SanDisk SDUFD2AK 1024 User Manual
Samsung Spinpiont M7 HM320II User Manual
Philips AZ5160 User Manual