Nokia 6161i User Manual

’

OWNER S

MANUAL

Keys

Power key

Press and hold to turn your phone

on or off.

Fixed

antenna

Do not

attempt to

extend or

remove!

Softkeys

Their current

function is

Menu Names

displayed

above the key

(for example,

here their

functions are

“Menu” and

“Names”).

Scroll keys

Scroll through

menus, sub-

menus, and

the phone

book. Press

and hold for

continuous

scrolling.

Push this key

to end a

phone call.

Dials the

number on

the display.

Keypad

cover

Flip it open to

answer a call

and to access

the keypad.

Flip it closed

to end a call.

Indicators and Icons

You have an active call.

The phone is waiting for you to enter a response.

All tones for the current profile have been set to Silent.

Keyguard has been activated to help prevent any

accidental keypresses.

You have one or more voice messages waiting.

You have one or more unread text messages waiting.

Digital service is available.

Any characters you enter will be upper-case letters or

numbers. Press the # key to switch letter case.

Any characters you enter will be lower-case letters or

numbers. Press the # key to switch letter case.

This appears when you press and hold the # key when

storing names. Letters can not be entered when this

appears, allowing quicker access to numbers.

You are in “special character” mode; select a special

character and press Insert. (When entering letters, you

can switch to this mode by pressing the ∗ key.)

The alarm clock is set.

You have a reminder in your calendar to do something

(appears only on Calendar display).

You have a reminder in your calendar that it’s

someone’s birthday (appears only on Calendar display).

You have a reminder in your calendar to call someone

(appears only on Calendar display).

You have a reminder in your calendar of a meeting

(appears only on Calendar display).

Table of Contents

1. Safety At A Glance . . . . . . . . . . . . . . . 1

2. Getting Connecte d . . . . . . . . . . . . . . . 3

Attaching your battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Removing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Charging your new battery . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

When is a good time to charge? . . . . . . . . . . . . . . . . . . . . . .4

Important Battery Information . . . . . . . . . . . . . . . . . . . . . . . . . .6

3. The Basics . . . . . . . . . . . . . . . . . . . . . 7

Switching the phone on and off. . . . . . . . . . . . . . . . . . . . . . . . .7

Get a good signa l . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Using the keypad cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Keyguard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

4. Using Your Phone. . . . . . . . . . . . . . . .11

The display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

What is the ‘start screen’? . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Scrolling through the main menu . . . . . . . . . . . . . . . . . . . . . .12

Help text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Summary of menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

5. Features A to Z . . . . . . . . . . . . . . . . 16

Access codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

All calls time r . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Automatic answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Automatic redial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Storing exchange rate . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Converting currency. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Call forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Call log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Call restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Call settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Call timer s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Caller groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Caller ID. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Calling card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Making calling card calls . . . . . . . . . . . . . . . . . . . . . . . . . 29

Clear call lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Clear timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Cloc k . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 0

Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Selecting time format . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Displaying or hiding the clock . . . . . . . . . . . . . . . . . . . . . . 31

Conference call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Current call timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Customer care contact number . . . . . . . . . . . . . . . . . . . . . . . 32

Dialed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Digital/analog selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Earpiece volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Emergency call s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4

Emergency key 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Entering letters and numbers . . . . . . . . . . . . . . . . . . . . . . . . 35

ABC mod e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 5

Changing letter case . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

123 mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Games. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

In-call menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Keypad tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Last call timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Last number redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Life timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Listen to voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Lock code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Changing your lock code . . . . . . . . . . . . . . . . . . . . . . . . . 42

Manual touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Memory statu s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3

Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Message alert tone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Missed calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

NAM selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Network feature setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Storing codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

One-touch dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Outbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Paging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Phone book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Storing a name and numbe r . . . . . . . . . . . . . . . . . . . . . . . .5 0

Recalling names & numbers. . . . . . . . . . . . . . . . . . . . . . . .51

Erasing stored names and numbers . . . . . . . . . . . . . . . . . .51

Phone lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Phone setting s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Customizing Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Public system selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Received calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Restore factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Restrict calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Ringing options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Ringing tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Ringing volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Scrolling view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Security settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Security code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Changing your security code . . . . . . . . . . . . . . . . . . . . . . .62

Send own number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Storing a name & number. . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Quick save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

T e xt messages and pages. . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Writing text messages . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Sending text messages . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Receiving text messages . . . . . . . . . . . . . . . . . . . . . . . . . .66

Reading text messages . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Reading options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Forwarding a message. . . . . . . . . . . . . . . . . . . . . . . . . . . .6 7

iii

Replying to a message . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Receiving a page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Touch tone length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Unlocked phone number . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Vibrating alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Storing your voice mailbox number . . . . . . . . . . . . . . . . . . 71

Greetings, passwords, and prompts . . . . . . . . . . . . . . . . . 72

Listening to your voice messages . . . . . . . . . . . . . . . . . . . 72

Voice privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Warning and game tones . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Welcome note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Write new . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

6. Accessorie s . . . . . . . . . . . . . . . . . . . 7 5

Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Chargers & Other Accessories. . . . . . . . . . . . . . . . . . . . . . . . 77

7. Troubleshootin g . . . . . . . . . . . . . . . . 8 0

8. Reference Information . . . . . . . . . . 81

9. T e chnical Data . . . . . . . . . . . . . . . . . 86

10. NOKIA One-Year Limited Warranty. . 87

11. Index . . . . . . . . . . . . . . . . . . . . . . . . 91

1. Safety At A Glance

Read these simple guidelines before using your

phone. Failure to comply with these guidelines may

be dangerous or illegal.

For more detailed safety information, see “Important

Safety Information” on page 81.

Road Safety Comes First

Don’t use a hand-held phone while driving; park the

vehicle first.

Switch Off In Hospitals

Switch off your phone when near medical

equipment. Follow any regulations or rules in force.

Switch Off On Aircraft

Mobile phones can cause interference. Using them

on aircraft is illegal.

Switch Off When Refueling

Do not use the phone at a refueling point. Do not

use near fuels or chemicals.

Switch Off Near Blasting

Do not use the phone where blasting is in progress.

Observe restrictions, and follow any regulations or

rules in force.

Interference

All mobile phones may get interference which could

affect performance.

Use Sensibly

Use only in the normal position (to ear). Avoid

unnecessary contact with the antenna when phone

is on.

Qualified Service

Only qualified service personnel may install or repair

cellular phone equipment.

Accessories and Batteries

Use only approved accessories and batteries.

Do not connect incompatible products.

FCC/Industry Canada Notice

Your phone may cause TV or radio interference (e.g. when using

a telephone in close proximity to receiving equipment). The

FCC/Industry Canada can require you to stop using your

telephone if such interference can not be eliminated. If you

require assistance, contact your local service facility.

This device complies with part 15 of the FCC rules. Operation is

subject to the condition that this device does not cause harmful

interference.

Using this Guide

The wireless phone described in this guide is approved for use

in TDMA/AMPS networks.

A number of features included in this guide are called Network

Services. They are special services provided by wireless service

providers. Before you can take advantage of any of these

Network Services, you must subscribe to the service(s) from

your home service provider and obtain instructions for their use.

Updates

The latest version of this Owner’s Manual may be found on

Nokia’s World Wide Web site at www.NokiaUSA.com.

Interactive manual

Now, Nokia has a great new way for you to learn how to use all

of your phone features. Go to www.NokiaHowTo.com to

access the Nokia Interactive Owner’s Manual. It provides an

interactive way to get step-by-step instructions for any of your

phone’s features.

Disclaimer

It’s possible that you may not be able to activate your phone on

all wireless systems. Please ask your service provider for details.

2. Getting Connected

You’ll need to charge your battery once your phone has

been activated. This section will help familiarize you on

how, and when, to charge your battery.

Attaching your battery

Simply place the battery in the grooves on the back of

your phone. Then slide the battery upward until it clicks.

Note: Use only those batteries approved by the phone

manufacturer and recharge your battery only with the chargers

approved by the manufacturer.

See “Important Battery Information” on page 6.

Removing the battery

Note: Switch off the phone before removing the battery!

1. Press and hold the

button at the top of

the battery.

2. Slide the battery

toward the bottom of

the phone.

3. Lift the battery off

the phone.

Charging your new battery

Your phone can be used with either a rechargeable

Li-Ion or NiMH battery. Note that a new battery’s full

performance is achieved only after two or three

complete charge and discharge cycles.

With your phone on or off, connect the charger to a

standard 120V AC outlet. Then connect the lead from

the charger to the bottom of your phone or place it on

a charging stand.

When the battery begins charging, your phone will beep

once and the battery strength indicator on the right side

of the display will scroll.

Note: If the battery is totally empty, it may take a few minutes

before the charging indication appears on the display.

If your phone displays Not charging, charging is

suspended. Check that the battery is not connected to

a non-approved charging device. If the battery is very

hot or cold, wait for a while; charging will automatically

resume after the battery is restored to its normal

operating state. If charging still fails, contact your dealer.

When is a good time to charge?

You can charge your battery anytime. If you have a

NiMH battery, you should allow it to completely

discharge once in a while.

When your phone beeps once and displays Battery low,

you only have a couple of minutes of talk time

remaining. The repetition rate of these battery-low

warnings depend on the remaining battery capacity and

the battery condition. These warnings are more

frequent when you’re in a call.

Note: The phone will not give you the warning tone under

certain conditions. See “Warning and game tones” on page 73.

Once all the power has drained from your battery, you’ll

hear three beeps with the message Recharge battery on

your display. At this point, your phone will switch itself

off and you’ll need to recharge your battery.

When is charging complete?

When the charge indicators stop scrolling, your

phone is considered fully charged. However, a

slight increase in charge may occur if your

phone is left connected to the charger for a

while. This is called “trickle charge.”

Charging times depend on the type of battery and

charger used.

For approximate charging and operating times, see “Standby

and T alk Times” on page 76.

Can you make calls while charging?

Yes, you can. But your battery may not charge while a

call is in progress. Charging should resume once you

end the call.

Discharging NiMH batteries

A NiMH battery lasts longer and performs better if you

fully discharge it from time to time. To discharge the

battery, leave your phone switched on until the battery

is drained. The phone will display several messages that

the battery is low and that you need to recharge it; just

ignore them. Do not attempt to discharge the battery by

any other means.

Important Battery Information

•

The battery can be charged and discharged hundreds of

times but it will eventually wear out. When the operating

time (talk time and standby time) is noticeably shorter than

normal, it is time to buy a new battery.

•

Use only batteries approved by the phone manufacturer

and recharge your battery only with the chargers approved

by the manufacturer. When a charger is not in use,

disconnect it from the power source. Do not leave the

battery connected to a charger for longer than a week,

since overcharging may shorten its life. If left unused a fully

charged battery will discharge itself over time.

•

(NiMH batteries only) For good operation times, discharge

the battery from time to time by leaving your phone

switched on until it turns itself off (or by using the battery

discharge facility of any approved accessory available for

your phone). Do not attempt to discharge the battery by

any other means.

Temperature extremes will affect the ability of your battery

to charge: allow it to cool down or warm up first.

•

Use the battery only for its intended purpose.

Never use any charger or battery which is damaged or

worn out.

•

Do not short circuit the battery. Accidental short circuiting

can occur when a metallic object (coin, clip, or pen)

causes direct connection of the + and - terminals of the

battery (metal strips on the back of the battery), for

example when you carry a spare battery in your pocket or

purse. Short circuiting the terminals may damage the

battery or the connecting object.

Leaving the battery in hot or cold places, such as in a

closed car in summer or winter conditions, will reduce the

capacity and lifetime of the battery. Always try to keep the

battery between 59º F and 77º F (15º C and 25º C). A

phone with a hot or cold battery may temporarily not work,

even when the battery is fully charged. NiMH batteries’

performance is particularly limited in temperatures below

14º F (-10º C). Li-Ion batteries’ performance is particularly

limited in temperatures below 32º F (0º C).

•

Do not dispose of batteries in a fire!

Dispose of used batteries in accordance with any local

regulations.

3. The Basics

You have purchased a powerful phone, with lots of

features. Read this section for some very basic

information on how to use your phone.

A more comprehensive description of your phone is

covered in “Features A to Z” starting on page 16.

Switching the phone on and off

Press and hold the

the phone on or off.

key for two seconds to switch

Switching off with the

key

Quickly press the key (Switch off! will appear,

highlighted) then press OK.

Note: Thismethod is available in all profiles exceptHeadsetand

Car.

NORMAL POSITION: Hold the phone as you would any other

telephone with the antenna pointed up and over your shoulder.

TIPS ON EFFICIENT OPERATION: As with any other radio

transmitting device, do not touch the antenna unnecessarily

when the phone is switched on. Contact with the antenna

affects call quality and may cause the phone to operate at a

higher power level than otherwise needed.

WARNING! Do not switch on the phone when wireless phone

use is prohibited or when it may cause interference or danger.

See “Safety At A Glance” on page 1 for more information.

Get a good signal

Your phone operates on radio waves, and the quality of

radio reception depends entirely on the strength of the

radio signal in your area.

This radio coverage is maintained by a wireless network

and the quality of calls on a wireless phone depends on

the strength of the wireless radio signal.

Checking signal strength

When you are at the start screen (see page 12)

or in a call, the signal strength is indicated by

the indicators on the left side of your phone’s

display. These indicators scroll as the strength

of the signal increases and decreases.

Increasing your phone’s signal may be easy. Try moving

your phone slightly, or move towards a window if you’re

calling from inside a building.

Using the keypad cover

When Keypad cover setting is on, you can answer calls

simply by opening the keypad cover. When you want to

hang up, just close the cover and the call will end.

When the keypad cover setting is off, you must open

the keypad cover to answer any calls. Once opened,

you can press any key (except the

answer a call.

and

keys) to

To end a call, press

cover.

before closing the keypad

Activating the keypad cover

1. Press Menu 4 2 6

2. Press ^Wor ^Vto On and press OK

Note: If you’re using a headset and wish to close the keypad

cover and still keep the call active, press Options once before

closing the keypad cover.

Making a call

enter the area code and phone number and press

^{When you want to make a call, open the keypad co}ó^ver,

Editing a number on display

Press ^Vto move the cursor to the left and ^Wto move it

to the right. Press Clear to delete the character to the left

of the cursor.

Dialing stored phone numbers

from the start screen (see page 12), then press

^{View stored names and numbers by pressing W}ó^{or V}

See “Phone book” on page 49 for details on storing numbers.

Calling card calls

See “Calling card” on page 27.

Emergency calls

See “Emergency calls” on page 34.

Ending a call

If Keypad cover setting is active, simply close the keypad

cover. Otherwise, press

See “Using the keypad cover” on page 8.

Answering a call

The phone rings according to the

settings in the currently selected

profile (see page 53).

If Keypad cover setting is active, simply open the keypad

except

^{cover to answe}ð^{r the call. Otherwise, press any key}

Note: If Keyguard is on (see page 10), only

See “Using the keypad cover” on page 8.

answers calls.

Want to stop your phone from ringing without

answering the call?

Press

when the phone rings. This keeps you from

answering a call if it’s inconvenient to talk.

You can still answer the call if Call or the name of the

person who is calling is still flashing on your display.

If you don’t wish to answer the call, it will be forwarded to

your voice mailbox if you have a voice mail subscription.

See “Voice messages” on page 71 for details on your voice

mailbox.

Keyguard

This feature helps to prevent accidental key presses

(e.g. when your phone is in your pocket, in your purse)

by locking your keypad.

If any keys are pressed while

Keyguard is activated, Press Unlock

and then * will display.

Activating Keyguard

There are three different ways to activate Keyguard.

Keys locked will appear on the display when activated.

•

Press and hold

Press Menu ∗

Press Menu 9 at the start screen

Deactivating Keyguard

Press Unlock, then ∗

Note: When Keyguard is ON, calls to the emergency number

programmed into your phone (e.g. by pressing 911 then

•

)

may be possible. However, Emergency key 9 doesn’t work.

Answering a call with Keyguard active

During an incoming call the keypad automatically

unlocks. However, you can answer a call only by

opening the keypad cover if it’s active; otherwise, press

^onlyó^{. After you end the call, Keyguard automatically}

becomes active again.

Some notes about Keyguard

•

Calls may be possible to the emergency number

programmed into your phone (e.g. 911 or other official

emergency number). The number is displayed only after

you have keyed in its last digit.

•

Pressing the

key quickly turns lights on for 15 seconds.

Keyguard is automatically turned off when the phone is

connected to a car kit.

4. Using Your Phone

The first few days you have your phone, play with it to

learn how the menu and submenu system works.

The more you learn how to access these menus and

submenus, the more fun you’ll have with your phone.

This section describes the different methods of using

your phone menus and submenus.

The display

Soft keys

Your phone has two soft keys

located below the display. The

current function is indicated by the

texts appearing directly above

them. Press the corresponding key

under the choice you wish to select.

This illustration shows the phone at the start screen

(see “What is the ‘start screen’?” on page 12). The start

screen always displays Menu on the left and Names on

the right. Menu allows you to access your phone’s

menus and submenus. Names allows you to access

your phone book (see “Phone book” on page 49).

Scroll keys

Your phone has two scroll keys located just below the

display screen. The scroll keys have arrows on them

that look like ^Vand ^W. Press these to navigate through

your phone’s menus and submenus, as well as through

your phone book (See “Phone book” on page 49).

Scroll bar

When you access your phone’s menu and

submenus, you will notice a scroll bar at the far

right of the screen. This bar indicates your

location in the menu structure; each “tab” on the

bar represents a different menu item.

For example, press Menu once. The scroll bar appears

with the first (top) tab displayed. A different tab appears

each time you press the ^Wor ^Vkey to move up and

down through the menu structure. The scroll bar works

the same way with submenus.

Menu & submenu numbering

When you scroll to a menu or submenu, the menu

number and/or submenu number appears on the

display above the scroll bar.

For example, when you scroll to menu 2 (Call log) the

number 2 appears in the top right-hand corner of the

display. If you scroll to menu 4 (Settings), submenu 3

(Security settings), your phone will display 4-3 in the top

right-hand corner.

See “Summary of menu items” on page 14 for a list of your

phone’s features along with their menu locations.

Also, see “Using shortcuts” on page 13.

What is the ‘start screen’?

The start screen appears when you first turn your phone

on, in its idle state.

When you want to get to the start screen, press

any time except during a call (unless you want to hang

up).

Note: If you press

(i.e., a setting, phone number, name, etc.), the phone displays

the start screen and the input is not saved.

when the phone is requesting input

Scrolling through the main menu

Press Menu at the start screen. Then press ^Wor ^Vto

reach the desired menu item.

Press Select, Options or OK (whichever appears) to

enter submenus and to choose options.

Press Exit to exit the present menu or Back to go back

one level.

Using shortcuts

This is a quick and easy way to access a menu without

having to scroll through other menus.

Press Menu, then menu number, then submenu

number.

Press the menu and submenu numbers within a couple

of seconds of each other when using this method.

For a summary of your phone’s menu structure, see “Summary

of menu items” on page 14.

Help text

If you’re not sure how a feature works, wait just a few

seconds and help text will appear for most of your

phone’s features. Press More to see the next page of

the text or Back to exit.

Summary of menu items

1 Messages

1 1 Text Messages

1 1 1 Inbox

1 1 2 Saved

1 1 3 Write new

1 1 4 Outbox

1 1 5 Erase all

1 2 Voice messages

1 2 1 Listen to voice messages

1 2 2 Voice mailbox number

1 3 Welcome Note

2 Call log

2 1 Missed calls

2 2 Dialed calls

2 3 Received calls

2 4 Clear call lists

2 5 Call timers

3 Profiles

3 1 Normal (following submenus appear in all profiles)

3 1 1 Select

3 1 2 Customize

3 1 2 1 Ringing options

3 1 2 2 Ringing volume

3 1 2 3 Ringing tone

3 1 2 4 Vibrating alert (w/vibrating battery only)

3 1 2 5 Keypad tones

3 1 2 6 Warning and game tones

3 1 2 7 Message alert tone

3 2 Silent

3 3 Meeting

3 4 Outdoor

3 5 Pager

3 6 Car (once used with car kit)

3 7 Headset (once used with headset)

4 Settings

4 1 Call settings

4 1 1 Emergency key 9

4 1 2 Automatic redial

4 1 3 Calling card

4 2 Phone settings

4 2 1 Clock

4 2 2 Alarm clock

4 2 3 Touch tones

4 2 4 Restore factory settings

4 2 5 Language

4 2 6 Keypad cover setting

4 3 Security settings

4 3 1 Restrict calls

4 3 2 Access codes

4 4 Network services

4 4 1 Voice privacy

4 4 2 Call forwarding

4 4 3 Call waiting

4 4 4 Send own number

4 4 5 Network feature setting

4 4 6 NAM selection

4 4 7 Digital/analog selection

(may not appear in all systems)

4 4 8 Public system selection

(may not appear in all systems)

5 System

5 1 Automatic

5 2 Manual

5 3 New search

6 Games

6 1 Memory

6 2 Snake

6 3 Logic

6 4 Dice

7 Calculator

8 Calendar

9 Keyguard

5. Features A to Z

ABC mode

This allows you to enter names into your phone book.

See “Entering letters and numbers” on page 35.

Access codes

This is a security feature that allows you access to

certain phone features, such as the phone lock (page 52)

and unlocked phone number (page 70).

Also, see “Lock code” on page 42 and “Security code” on

page 61.

Alarm clock

The alarm clock operates off your

phone’s clock. The volume for the

alarm clock is determined by the

current ringing volume.

Note: If you have selected the Silent or Beep once ringing

option (see page 58), your alarm clock will quietly beep one

time.

See “Clock” on page 30 for information on your phone’s clock.

Setting the alarm clock

1. Press Menu 4 2 2 (Settings - Phone settings - Alarm

clock)

2. Enter time you wish to set alarm (use two-digit

fields for hours and minutes). Existing digits will be

replaced with the new alarm time.

3. Press OK

4. Select either am or pm and press OK

Note: Step 4 appears only if you have selected am/pm format;

see “Selecting time format” on page 31 for more information.

When the alarm goes off

Press Stop to shut off the alarm.

Snoozing

Press Snooze.

The alarm will go off again in 10 minutes. If you let the

phone alarm for 1 minute without pressing a key, it

stops alarming for 10 minutes then starts again.

Turning the alarm clock off

Press Menu 4 2 2 (Settings - Phone settings - Alarm

clock), then scroll to Off and press OK.

Note: If you have selected the Silent or Meeting profile, your

alarm will only beep once. The best profile to use while using the

alarm clock is Normal or Outdoor, unless these have been

modified from their original settings.

For more information on Profiles, see page 53.

All calls timer

This feature keeps track of how much time you have

spent on all calls with your phone.

See “Call timers” on page 24.

Automatic answer

This is one of the settings in your phone’s Profiles

(see page 53). With this on, your phone answers

incoming voice calls after one ring.

Note: This can only be used when your phone is connected to

a headset or to an approved handsfree car kit equipped with the

ignition sense option, with the ignition on.

Activating automatic answer

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use ^Wto highlight

either the Car or Headset profile and press Options.

Note: Car and Headset will not appear unless your phone has

already been connected to a car kit or headset at least one time.

3. Highlight Customize and press OK. Press ^Wto

Automatic answer, then press Select again.

4. Press ^Wto On and press OK.

Automatic redial

to 3 times after you hear a quick, busy signal. Press

^{Your phone will redial the number you’re trying to ca}ô^{ll up}

to stop the call attempts.

This feature attempts to redial numbers that are busy

due to the wireless network. It will not redial numbers to

a busy party.

Activating automatic redial

Press Menu 4 1 2 (Settings - Call settings - Automatic

redial), then press ^Wor ^Vto On and press OK.

Calculator

Your phone’s calculator adds,

subtracts, multiplies, divides, and

converts currency.

Remember! Your phone must be switched

on to use this feature. Do not switch on the

phone when wireless phone use is prohibited or when it may

cause interference or danger.

Using the calculator

1. Press Menu 7 (Calculator)

2. Enter the first number in the calculation (press # for

decimals)

3. To add, press ∗ (+ appears)

To subtract, press ∗∗ twice (- appears)

To multiply, press ∗∗∗ (* appears)

To divide, press ∗∗∗∗ ( / appears)

To add a decimal, press the # key

4. Enter the second number

Repeat these steps as many times as needed. Press

Clear to erase any mistakes.

5. Press Options. With Equals highlighted, press OK

Note: You can also choose Add, Subtract, Multiply, and

Divide from the list of options.

Storing exchange rate

1. Press Menu 7, then press Options

2. Scroll to Exchange rate and press OK

3. Press ^Wor ^Vat either How many home units to a

visited unit or How many visited units to a home

unit, depending on how you wish to convert the

currency. Press OK once you decide.

4. Enter the appropriate exchange rate and press OK

(use the # key for decimals)

5. Phone will display Rate saved

Converting currency

1. Press Menu 7

2. Enter number of units, then press Options

3. Press ^Wor ^Vto either To home or To visited, and

press OK

4. Converted currency is displayed

Calendar

The calendar keeps track of

birthdays, meetings, simple

reminders, and calls you need to

make. It can even sound an alarm

when it’s time for you to make a call

or go to a meeting.

Remember! Your phone must be switched on to use this

feature. Do not switch on the phone when wireless phone use

is prohibited or when it may cause interference or danger.

Note: Your phone must remain on to use the calendar’s alarm

feature. If your phone is off, the alarm will not sound at its

scheduled time.

Using the calendar

1. Press Menu 8 (Calendar)

2. If you haven’t set the time and date, your phone

prompts you to set your phone’s clock

When your phone prompts you for the time with

hh:mm, enter the time in hours and minutes (using

two-digit fields), then press OK

Time format (24-hour or am/pm) is set using the Clock.

See “Selecting time format” on page 31.

When your phone prompts you for the date with

mm/dd/yyyy, enter the month and day (using two-

digit fields) and year (using a four-digit field), then

press OK.

Tip: Use ^Wto move the cursor right and ^Vto move it

left. When you enter a digit, it writes over the number to

the right of the cursor.

3. Your phone displays the current day. You can also

scroll to different days by pressing ^Wor ^V.

4. Once you’re at the date you want, press Options.

Then use ^Wýto highlight the option you want, and

press Select. The options are:

Option 1: View day

With this option, you can view the notes of the day

currently on display.

Use ^Wto scroll through the notes. Each note allows you

to choose the following Options:

Erase clears the note from your calendar.

Edit gives you the same prompts you got when you

made the note.

Move gives you the date prompt so you can move the

note to another date.

Option 2: Make note

With this option, you’ll need to choose Reminder, Call,

Meeting, or Birthday. Your phone will prompt you for

more information depending on which one you choose.

You can also set an alarm for any calendar note.

See “Entering letters and numbers” on page 35 for help with

entering information at the Subject: prompt.

Note: When the alarm goes off, you can press Postpone or OK.

Press OK to shut off the alarm.

Option 3: Erase notes

With this option, you’ll need to choose which notes to

erase. If you choose all the notes for the day currently

on display (Of Chosen Day), or One By One (for all notes

in the calendar), your phone presents each note to you

with the option Erase or Back.

If you choose All at Once, your phone will delete all

calendar notes. When prompted to confirm the erase,

press Yes or No.

Option 4: View all

This allows you to view the notes of the entire calendar.

Use ^Wor ^Vto scroll through the notes. Calendar memory

empty will appear if there are no notes in the calendar.

Option 5: Go to date

Enter the date you wish to go to.

Option 6: Set the date

Enter the day and month (using two-digit fields) and

year (using a four-digit field), then press OK.

Call forwarding

This network service is used to forward incoming calls

to another number so you won’t miss an important call.

Check with your service provider for details.

Note: Before you can activate this feature, you should first store

the feature code given to you by your service provider.

Otherwise, this feature may not appear in the menu.

However, you can use the feature code manually, if you choose,

by including the feature code in front of the phone number

(e.g., *72 555 1212)

See “Network feature setting” on page 46 for more details.

1. Press Menu 4 4 2 (Settings - Network services - Call

forwarding)

2. Scroll to desired call forwarding feature (see options

on next page) and press Select

3. Highlight Activate and press OK

4. Enter phone number at Number: (or press Search to

locate number in phone book) and press OK

5. Your phone will attempt to call the network to

confirm the feature code you entered in Menu 4 4 5

(see “Network feature setting” on page 46)

6. Once the feature code had been confirmed, the

feature is activated

Call forwarding options

Forward all calls forwards all incoming calls.

Forward if busy forwards calls only when you’re on the

phone.

Forward if not answered forwards calls if you don’t

answer.

Forward if out of reach forwards calls if you are out of

the serving wireless network.

Cancel all call forwarding cancels all call forwarding

options you have active.

Call log

This feature automatically keeps

track of numbers you’ve dialed,

numbers that have called you, and

the amount of time you’ve spent on

calls.

Using call log

1. Press Menu 2 (Call log)

2. Scroll to one of the following options, then press

Select or OK

2-1 Missed calls - See page 45.

2-2 Dialed calls - See page 32.

2-3 Received calls - See page 55.

2-4 Clear call lists - See page 29.

2-5 Call timers - See page 24.

Tip: You can dial any of the phone numbers by pressing

while the number is on the display.

The ‘Options’ soft key

When you access Dialed calls, Received calls, or Missed

calls and press Options, a list of options will appear on

your phone’s display.

Call time shows the date and time when the call was

first connected (if clock has been set)

Edit number allows you to edit the dialed number.

Save allows you to save the number into your phone

book.

Erase will erase the number from the call list.

View number will appear only if the number has been

stored in the phone book and the name is displayed

instead of the number.

Call restrictions

This feature allows you to restrict incoming and

outgoing calls to and from certain numbers.

See “Restrict calls” on page 56 for details.

Call settings

This feature allows you to access and activate some of

your phone’s features.

Using call settings

1. Press Menu 4 1 (Settings - Call settings)

2. Press ^Wto reach one of the following options, then

press Select

4-1-1 Emergency key 9 - See page 34.

4-1-2 Automatic redial - See page 18.

4-1-3 Calling card - See page 27.

Call timers

Your phone automatically keeps

track of the amount of time you’ve

spent in calls.

1. Press Menu 2 5 (Call log - Call

timers)

2. Scroll repeatedly to access the following options

Last call displays call duration of last call.

All calls displays call duration of all calls made since

timers have last been reset (see page 30 for details

on how to clear call timers).

Life timer shows duration of all calls; this can not be

reset (see page 41).

Clear timers clears all call timers except the Life

timer (see page 30).

These call durations are for the currently-selected NAM

(phone number). Your phone has separate timers for

each NAM your phone uses, except for the Life timer.

See “NAM selection” on page 45 for details on NAM.

Note: The actual time invoiced for calls by your service provider

may vary, depending upon items such as network features,

rounding off for billing, and taxes.

Call waiting

If you have subscribed to Call Waiting, your phone will

beep during a call let you know you have an incoming

call. Your phone may also display the incoming caller’s

identification (see “Caller ID” on page 27).

Answering an incoming call with call waiting

Press

Swapping between two calls

Press

Ending the calls

Press to end both calls

Activating call waiting

You can also activate this feature with your phone;

simply ask your service provider for the feature code,

store it into your phone, then activate it.

Note: This feature may not appear in your phone’s menu until

the feature code has been stored.

See “Network feature setting” on page 46 for more details.

1. Press Menu 4 4 3 (Settings - Network services - Call

waiting)

2. Scroll to Activate (or select Cancel to cancel and

press OK

3. Your phone will attempt to call the network to

confirm the feature code you entered in Menu 4 4 5

(see “Network feature setting” on page 46)

4. Once the feature code had been confirmed, the

feature is activated.

Caller groups

You can create groups of names in your Phone book

(see page 49), and give each group a different ringing

tone. Then you’ll know when someone from that group

is calling you because of the way the phone rings.

Adding names to a caller group

Note: The names and numbers that you add to a group must

already be stored in your phone book. See “Storing a name and

number” on page 50.

1. With the display clear, press ^Wuntil you see the

name or number you want

2. Press Details, if shown, or skip to Step 3

3. Press Options

4. Use ^Wto reach Caller groups. Press Select.

5. Use ^Wto reach the group to which you want to add

this name or number. Press Select.

Defining a ringing tone for a caller group

1. With the display clear, press Names

2. Press ^Wto reach Caller groups. Press Select

3. Use ^Wto reach the group you want. Press Select

4. Press ^Wuntil you see Group ringing tone. Press

Select. Use ^Wto reach the tone you want to hear

when anyone from this group calls you. Press OK.

Tip: You can set your phone to ring only when people

from certain caller groups call you, and to otherwise be

silent.

See the “Caller group” description under “Ringing options” on

page 58.

Renaming a caller group

1. Follow steps 1-3 in “Defining a ringing tone for a

caller group”

2. Press ^Wuntil you see Rename group. Press Select.

3. Enter the group name (see “Entering letters and

numbers” on page 35 for details) and press OK

Removing names from a caller group

1. Follow steps 1-4 in “Adding names to a caller group”

2. Use ^Wto reach No group. Press Select.

Caller group graphics

When someone calls you from a particular caller group,

your phone can display a graphic to identify which caller

group that person is calling from.

1. Press Names, scroll to Caller groups, then press Select

2. Scroll to the caller group you wish to display the

graphic for and press Select

3. Scroll to Group graphic and press Select

4. Scroll to On to display the graphic that goes with

that particular caller group

Caller ID

Caller ID is a network service that can display the name

and phone number of the person calling you, if the in-

formation is available. Contact your service provider for

details.

If the caller can be identified, the phone may display the

caller’s name and phone number. The information

displayed depends on the information available through

the network and your phone book. It is possible that

only the name or the number will appear.

Call - caller ID unavailable will display when the wireless

network doesn’t recognize the calling number. Also,

Call - caller ID blocked may display if the calling party

has blocked caller ID.

Calling card

If you wish to use a calling card for

long distance calls, you must first

store your calling card information

into your phone. Your phone can

store up to four calling cards.

Storing your calling card

1. Press Menu 4 1 3 (Settings - Call settings - Calling

card)

2. Scroll to desired calling card and press Options

3. Press ^Wor ^Vto Edit, press OK

4. Enter security code and press OK

5. Press Select at Dialing sequence. Select the dialing

sequence your card uses (use chart on next page),

press ^Wor ^Vto choose sequence, then press Select

Note: The order of the following steps may vary, depending on

which dialing sequence your card uses.

6. Enter access number when prompted for the

calling card’s access number (usually the 1-800

number listed on the back of the calling card),

press OK

Note: You can also retrieve the access number from your phone

book if it has already been stored. Simply press Search, then W

or ^Vto find the number.

7. Enter card number and/or PIN when prompted to

enter calling card number and personal

identification number, then press OK. Press OK

again at Save changes?

8. Press ^Wor ^Vto Card name and press Select. Enter

card name using your phone’s keypad, press OK.

See “Entering letters and numbers” on page 35 if you need

help on entering the card name

For details about your phone’s security code, see “Security

code” on page 61.

Cards using

this

sequence*

Dialing

Sequence

Use for cards that

require you to:

Access no.

+ phone no.

+ card no.

Dial 1-800 access number,

then phone number, then card Choice, Sprint

number (+ PIN if required)

MCI, AT&T True

Canada, Unitel

Access no.

+ card no.

+ phone no.

Dial 1-800 access number,

then card number (+ PIN if

required), then phone number

networkMCI,

WorldPhone MCI

Prefix

Dial the prefix (any numbers

GTE, PacBell,

+ phone no.

+ card no.

that must precede the phone AT&T, Stentor

number) and phone number

you want to dial, then card

number, (then PIN, if required)

*These calling cards are frequently used with these dialing

sequences. However, they may vary and are subject to change

at the phone company’s discretion.

Choosing a calling card to use

1. Press Menu 4 1 3 (Settings - Call settings - Calling

card)

2. Scroll to desired card and press Options

3. Press ^Wor ^Vto highlight Select and press OK

4. Enter security code at Security code:, press OK

5. Your phone will display Card ready for use

Making calling card calls

1. Enter the phone number, including any prefix (such

as 0 or 1) that your calling card may require when

you make a calling card call. See your calling card

for instructions.

2. Press and hold

for a few seconds until your

phone displays Card call.

3. Listen for the tone, then press OK. (Your phone will

display Wait for tone, then press OK)

4. Listen for the tone again, then press OK. (Your phone

will display Wait for tone, press OK again.)

Note: This procedure may not apply to all calling card options

programmed into your phone. Please look at the back of your

calling card or contact your long distance company for more

information.

Change lock code

This feature allows you to change your lock code.

See “Changing your lock code” on page 42.

Change security code

This feature allows you to change your security code.

See “Changing your security code” on page 62.

Clear call lists

This feature will clear all dialed numbers, as well as

numbers of answered calls and missed calls. You can

not undo this operation, so be careful.

Also, see “Call log” on page 22.

1. Press Menu 2 4 (Call log - Clear call lists)

2. Highlight either All, Missed, Dialed, or Received and

press OK (All will clear all call lists, while the others

clear their respective call lists)

Clear timers

This feature clears all call timers for the currently-selected

NAM. See “Call timers” on page 24 for more details.

1. Press Menu 2 5 4 (Call log - Call timers - Clear timers)

2. Enter security code at Security code: and press OK

Careful: Clearing call timers can not be undone. If you are

using the call timers to log or track the amount of time you are

using your phone, you may wish to record the call timers before

you erase them.

Note: The Life timer contains important warranty information

and can not be reset. See “Life timer” on page 41 for details.

Clock

Your phone has an internal clock

that can be displayed or hidden.

It also features an alarm clock

(see page 16).

Note: The clock is powered by your

phone’s battery. If your clock has been activated and you

remove the battery while your phone is still on, you will need to

reset the time after you turn your phone back on.

However, if you first turn your phone off before removing the

battery, your phone will retain the time and date it had before the

battery was removed.

Setting the clock

1. Press Menu 4 2 1 (Settings - Phone settings - Clock)

2. Scroll to Adjust time and press Select

3. Enter present time at Time: (use two-digit fields for

hours and minutes)

4. Press OK

5. Select am or pm and press OK (if am/pm format has

been selected; see next page)

Selecting time format

1. Press Menu 4 2 1 (Settings - Phone settings - Clock)

2. Scroll to Time format and press Select

3. Scroll to either 24-hour or am/pm

4. Press OK

Displaying or hiding the clock

1. Press Menu 4 2 1 (Settings - Phone settings - Clock)

2. Scroll to either Hide clock or Display clock (only one

will display depending on the current setting)

3. Press Select

Conference call

This feature allows you to add a third party to a call. You

can use this feature with local and long distance calls.

Note: This feature may not be available in all wireless systems.

See your service provider for details and availability.

Making a conference call

^{While in a call, enter (or recall from the}ó^{phone book)}

the second phone number and press

2. Once the third party answers, press

connect all three parties

3. Press

again if you wish to disconnect the third

to drop both parties.

party. Press

Recalling a number from the phone book during

a conference call

1. During the call, press Options

2. Scroll to Names and press OK

3. Press Select at Search

4. Enter name and press OK, or just press ^Wor ^Vto

scroll through the phone book

5. Press

Current call timer

This feature displays the running elapsed time on your

screen while a call is active. Once the call has ended,

simply press any key to clear the display.

Also, see “Call timers” on page 24.

Activating the current call timer

Press Menu 2 5 (Call log - Call timers) and press Details.

With Current call timer displayed, press Select, scroll to

On, and press OK

Customer care contact number

With the press of a single button, you can quickly

attempt calls to your service provider. This feature can

be helpful if you’re having difficulties dialing a number,

especially when traveling outside your home area.

Simply press and hold the 2 key and your phone will

attempt to call a customer care operator in the area.

Note: This may not be available on all systems. Contact your

service provider for availability.

Customize profiles

This feature allows you to customize individual Profiles.

See “Profiles” on page 53 for details.

Dialed calls

Your phone automatically stores the

last 10 numbers you’ve dialed.

1. Press Menu 2 2 (Call log - Dialed

calls)

2. Press ^Wor ^Vto scroll through dialed numbers list

3. Press

to dial the number you wish to call

You can also access the last 10 dialed numbers if you

^pressó^{, then quickly press}^Wor ^Vto scroll through

the list.

Also, see “Call log” on page 22 for details on other call lists.

The ‘Options’ soft key

See “The ‘Options’ soft key” on page 23.

Digital/analog selection

Note: This feature will not appear in your phone until needed.

Please contact your service provider for details.

The feature allows you to select whether your phone

uses an analog or digital network. The network can

always override your setting, however, and the network

you choose must be available.

Selecting either analog or digital

1. Press Menu 4 4 7 (Settings - Network services -

Digital/analog selection)

2. Press ^Wor ^Vto one of the following:

Digit. & analog Allows your phone to first search for a

digital network to place a call. If one is not available, it

will then search for an analog network.

Analog Your phone will place calls only in an analog

network.

Digital Your phone will place calls only in a digital network.

3. Press OK

The phone resets itself to Digit. & analog when you

switch the phone off and back on.

Earpiece volume

The scroll keys on your phone will adjust the earpiece

volume during a phone call. The top scroll key increases

while the bottom one decreases the volume.

If an accessory like a headset or a car kit, or one with its

own loudspeaker, is connected to your phone, the scroll

keys will adjust the volume for that accessory.

Note: Using the scroll keys to adjust earpiece volume functions

only during phone calls.

Emergency calls

Before attempting any emergency calls, see “Emergency Calls”

on page 83 for important safety information.

1. If the phone is not on, switch it on

2. Press the

key to ready the phone for calls.

(Press it twice if there are still digits on the display.)

3. Key in the emergency number for your present

location (e.g. 911 or other official emergency

number). Emergency numbers vary by location.

4. Press

IMPORTANT!

This phone, like any cellular phone, operates using radio signals,

cellular and landline networks, as well as user-programmed

functions which can not guarantee connection in all conditions.

Therefore, you should never rely solely upon any cellular phone

for essential communications (e.g., medical emergencies).

Remember, to make or receive any calls, the phone must be

switched on and in a service area with adequate cellular signal

strength.

Emergency calls may not be possible on all cellular phone

networks or when certain network services and/or phone

features are in use. Check with local cellular service providers.

If certain features are in use (keyguard, restrict calls, etc.), you

may first need to turn those features off before you can make an

emergency call. Consult this document and your local cellular

service provider.

When making an emergency call, remember to give all the

necessary information as accurately as possible. Remember

that your cellular phone may be the only means of communication

at the scene of an accident - do not cut off the call until given

permission to do so.

Emergency key 9

emergency call when you press 9, then

dials the emergency number pre-programmed into your

phone.

^{With this feature on, the phone attemp}ó^{ts to make an}

. The phone

Note: You can also dial an emergency call by pressing and

holding 9 until the phone indicates it is attempting to make an

emergency call. However, this method does not work when

Keyguard is active or when the phone is connected to a modem.

Activating Emergency key 9

Press Menu 4 1 1 (Settings - Call settings - Emergency

key 9), scroll to On to activate or Off to cancel, then

press OK.

IMPORTANT!

Official emergency numbers vary by location (e.g. 911). Only

one emergency number is programmed into your phone to be

dialed automatically by Emergency key 9, which may not be the

proper number in all circumstances.

Entering letters and numbers

You can enter letters, as well as numbers, when storing

information into your phone by using your phone’s

keypad. When you see the letter you wish to enter,

simply press the key associated with that letter until it

appears on the display (numbers also appear).

ABC mode

When you need to enter letters into your phone, it will

automatically switch over to

mode.

Your phone displays the

icon to indicate that your

phone is in ABC mode. It also displays when you are

viewing names rather than numbers.

When

is displayed, you can enter these

characters (see next page):

Key Characters Key

Characters

PQRS7

.,’?!-1

ABC2

DEF3

GHI4

∗

TUV8

WXYZ9

Enters an empty space, 0

(See next page)

JKL5

MNO6

Changes letter case; long

press toggles between

ABC/abc and 123 mode

While you’re editing a name, the ^Vkey will move the

cursor to the left, and ^Wwill move it to the right.

Press Clear to correct any mistakes.

If you wish to enter an empty space between

characters, press 0 for each space.

Changing letter case

Press the # key to switch between upper and lower

case letters. The

icon will switch to

indicate you are using lower case.

123 mode

When storing names to the phone book, you can enter

a number within a name at any time. Simply press that

particular number key a few times until it appears.

However, you can do this more quickly by accessing the

mode, without having to scroll through each letter

to access the number you wish to enter.

Simply press the # key for about 2 seconds while in

mode and the

mode, only numbers can be entered. Letters can not be

entered unless your phone is in mode.

icon will appear. While in this

Press the # key again for a couple of seconds if you

wish to deactivate the mode.

Special characters (for storing names)

When in ABC mode (see page 16), you can press the ∗

key and the following special characters will appear. You

can use these characters to help when storing names

in your phone book. Simply press ^Wor ^Vto highlight the

one you wish to use and press Insert.

. , ? ! : ; - + # * ( ) ‘ “ _ @ & $ £ % / < > ¿ ¡ § = [ ] ¥

TIP: If you wish to access a special character that

appears toward the end of this list, press ^Vfor quicker

access.

Special characters (for storing numbers)

The following special characters are helpful when you

store names to your phone book (see page 49). Simply

press the * key once or repeatedly, and the following

characters can be stored within the number sequence.

(p) creates a pause when a number is dialed; the

digits located to the right of the “p” are

automatically sent as touch tones after a 2.5

second pause (see page 68).

(w) creates a “wait” when a number is dialed.

Send or

^{The “w”}ó^{makes your phone wait for you to press}

, then it sends the digits located to the

right of the “w” as touch tones (see page 68).

You can add as many special characters as you need in

a single number sequence. These characters can not

be entered while in

mode.

Erasing stored names and numbers

See “Erasing stored names and numbers” on page 51.

Erasing your entire phone book

See “Erasing your entire phone book” on page 51.

Games

You have four exciting games to choose from in your

phone. Press Menu 6 to choose one of the following

games:

REMEMBER! Your phone must be switched on to use this

function. Do not switch on the phone when wireless phone use

is prohibited or when it may cause interference or danger.

Memory

Reveal pictures to find pairs in as few tries as possible.

Move the cursor with the 2 (up), 4 (left), 6 (right), and 8

(down) keys. Press the 5 key to reveal pictures. Press

the # key to jump right over revealed pictures or move

from top left to bottom right. Press the ∗ key to jump left

over revealed pictures or move from bottom right to top

left. Once found, pairs stay visible.

Snake

Feed the snake with as many goodies as possible and

watch it grow. Use keys 2, 4, 6, and 8 to turn the snake

toward food. The longer the snake’s tail grows, the

higher the score. If the snake hits its own tail or the

surrounding wall, the game is over.

Logic

Find a secret combination of figures. Available figures

are shown at the top of the display before you accept

the first guess row. Use the 2, 4 and 8 keys to move the

cursor and the 5 key to select the figure. To copy a

figure from a previously accepted guess row, start

scrolling with the 4 key, move the cursor to the desired

figure in the normal way and accept the selection with

the 5 key.

Once you think you have the right combination, press

the * key. The result is presented as a set of marks over

the row. A correct figure in the right place gives a full

mark; a correct figure in the wrong place gives a half

mark. The game ends when all the figures are correct

and in the right place.

Dice

Use this to play other games that require a set of dice if

one isn’t available. Use the Level option to set the

number of dice, up to six. You can roll, lock, and unlock

each die as many times as you wish.

When you start a new game, the dice roll for a couple of

seconds and then stop. Use the 4 (left) and 6 (right) keys

to select a die. Press the 5 key to lock or unlock the

selected die.

Press ∗ to roll the unlocked dice again.

Game options

When you select a game, you can choose from the

following submenus:

Level allows you to choose the level of difficulty.

New game starts a new game.

Top score will display the top score (does not appear in

Logic).

Instructions will describe how the game is played.

Note: Last view or Continue may appear in the options list if a

game is interrupted, not finished, or if you have lost the game.

Inbox

When you receive a text message, it’s stored in the

Inbox. Your phone will display Message received, along

with the text message icon, and makes a sound

(depending on the message alert tone; see page 44).

Please see “T e xt messages and pages” on page 64 for

complete details on this feature.

In-call menu

While in a call, you may notice the Options soft key.

Pressing this will access you to the in-call menu, and

you may notice the following choices:

Touch tones You can manually enter a touch tone string

or search for one in your phone book (see “Phone book”

on page 49)

New call You can make a third party conference call

(see “Conference call” on page 31)

Menu Allows you access to your phone’s menu

Names Allows you access to your phone book

(see “Phone book” on page 49)

Mute Allows you to mute the microphone; if your

microphone is already muted, this will change to End

mute (see “Microphone” on page 44)

Keyguard

This feature helps protect the keypad against accidental

keypresses.

See “Keyguard” on page 10 for complete details.

Keypad cover setting

This feature activates the keypad cover if you wish to

answer and end calls with the keypad cover.

See “Using the keypad cover” on page 8 for details.

Keypad tones

This is one of the settings in your phone’s Profiles

(see page 53). It sets the volume of the tone you hear

when you press your phone’s keys.

Note that if you choose the Silent profile, keypad tones

will be turned off.

Setting the keypad tones

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use^Wto highlight the

one you want to set the keypad tones for and

press Options.

3. Highlight Customize and press OK. Press ^Wto

Keypad tones and press Select

4. Press ^Wto scroll through the options; your phone

plays a sample of each. Press OK for the one you

want.

Language

Because many wireless phone

customers speak English as a

second language, your phone allows

you to choose your phone’s

displayed language.

Choosing a language for your phone

Press Menu 4 2 5 (Settings - Phone settings - Language),

scroll to the language you wish to use and press OK.

You can choose from English, French, Spanish,

Portuguese or Traditional Chinese.

Last call timer

This feature displays the duration of your last call.

See “Call timers” on page 24.

Last number redial

When you want to call your last dialed number,

Press

and wait 3 seconds

Note: You must be at the start screen before you press

Letter case

You can change from upper to lower case when

entering letters into your phone.

See “Changing letter case” on page 36 for complete details.

Life timer

The life timer displays the total time of all calls dialed and

received with your phone (in hours and minutes only).

The life timer can not be reset and is used in conjunction

with your phone’s warranty

Also, see “Call timers” on page 24.

Lights

This is one of the settings in your phone’s Car Profile

(see page 53). This feature determines whether the

lights are on only when you use your phone, or if they

are on at all times. This setting works only when your

phone is connected to a car kit.

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use^Wto highlight Car

and press Options.

Note: Car will not appear in the list until the phone has been

connected to a car kit at least once.

3. Highlight Customize and press OK. Press ^Wto

highlight Lights and press Select.

4. Use ^Wto scroll through your choices and press OK

If you select Automatic, your phone’s lights are turned

off within fifteen seconds if no keys are pressed. If On is

selected, then the lights will remain on the entire time

your phone is connected to the car kit.

Listen to voice messages

This feature allows you to access your voice messages.

See “Voice messages” on page 71 for complete details.

Lock code

You’ll need the lock code to activate and deactivate

Phone Lock (see page 52), or to change your lock

code. The default lock code is 1234. If you enter an

incorrect lock code five times in a row, your phone will

prompt you for the security code (see page 61).

Changing your lock code

In a lock code, only numeric characters are accepted.

1. Enter Menu 4 3 2 3 (Settings - Security settings -

Access codes - Change lock code)

2. Enter lock code at Enter lock code: and press OK

3. Enter new lock code, press OK

4. Verify new lock code, press OK

Note: When you change your lock code, make sure you store it

in a safe place, away from your phone. Avoid entering access

codes similar to emergency numbers to prevent accidental

emergency calls.

Manual touch tones

This setting determines how long touch tones are

produced as you press the keys on the keypad. Note

that touch tones are sometimes called DTMF tones.

See “T o uch tones” on page 68 for details.

Setting manual touch tones

Press Menu 4 2 3 1 (Settings - Phone settings - Touch

tones - Manual touch tones) and highlight one of the

following options, then press OK.

Continuous means the tone sounds for as long as

you press and hold the key.

Fixed sets the tone length to .1 second, regardless

of how long you press the key.

Off turns the tones off, and no tones will be sent

when you press the keys.

Memory status

This feature allows you to see how many free and in-use

memory locations are in your directory.

Also, see “Phone book” on page 49.

Press Names, scroll to Options and press Select.

Then scroll to Memory status and press Select again

Messages

This feature allows you to access your voice and text

messages, as well as composing your own welcome

note.

Using messages

1. Press Menu 1 (Messages)

2. Scroll to one of the following options, then press

Select

1-1 Text messages - See page 64.

1-2 Voice messages - See page 71.

1-3 Welcome note - See page 73.

Message alert tone

This is one of the settings in your phone’s Profiles

(see page 53). It sets the tone that your phone makes

when you get a text message.

Also, see “T e xt messages and pages” on page 64.

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use^Wto highlight the

one you want to set the message alert tone for and

press Options.

3. Highlight Customize and press OK. Press ^Wto

highlight Message alert tone, then press Select.

4. Use ^Wto scroll through your choices (your phone

plays samples) and press OK.

Microphone

You can mute and unmute your phone’s microphone

while a call is in progress. During a call, your phone’s

soft keys change from Names and Menu to Options and

Mute.

Muting and unmuting your phone

You can mute the phone’s microphone during a call;

simply press Mute. To unmute the microphone, press

Unmute.

If these texts are not available, press Options, scroll to

Mute or End mute and press Select.

Muting and unmuting also affect the microphones of

any accessories connected to the phone.

Missed calls

Your phone will keep track of the last 10 calls you have

missed if you weren’t around to answer the call. Missed

calls will appear in your phone only if your phone was

turned on and in a service area when the call was missed.

If the display says ‘Missed calls’

Press List. To call back the displayed number, press

ó^{. Press}^Exit^{to go back to the start screen.}

The ‘Options’ soft key

See “The ‘Options’ soft key” on page 23.

Checking the missed calls list anytime

Press Menu 2 1 (Call log - Missed calls), then scroll

through the list.

This shows you the phone numbers of the 10 most

recent calls you’ve not answered.

When the Forward if not answered option in the Call

Forwarding feature (see page 21) is selected, your

phone treats the forwarded calls as missed calls.

Also, see “Call log” on page 22 for details on other call lists.

NAM selection

The service provider programs your phone with the

phone number and system information into your

phone’s memory when your phone is first activated.

This is called a Number Assignment Module (NAM).

For example, your phone can be activated in up to 3

different service areas (e.g. one in Dallas, another in

Chicago, and maybe one more in New York), each

giving your phone a different phone number or account.

Only one number can be active at a time. When you

select a phone number, you’re also selecting which

system you’re using as your home system (see “System”

on page 63). The first phone number displayed with this

menu is the currently selected number.

Note: It may not be necessary to have three NAMs for your

phone if your service provider has service or roaming

agreements for each area in which you wish to use your phone.

Contact your service provider for details.

Selecting the NAM for your phone

Press Menu 4 4 6 (Settings - Network services - NAM

selection), highlight the phone number you want to use

and press OK.

Note: You need at least one active number to make calls.

You can not change from one NAM to another during a call.

Network feature setting

Call forwarding (page 21), Call waiting (page 24) and

Send own number (page 62) are network services

available through your service provider or dealer.

When you subscribe to any of these services, your

service provider or dealer gives you a separate feature

code to activate each service. Deactivation codes are

used to deactivate each service.

Once you store the appropriate code in your phone, the

service appears as a menu item. You can then use the

menu to activate and deactivate these services.

Each time you use a feature that requires a feature

code, that code is sent to the network to verify you’re

using the correct feature code.

Note: If your phone has more than one phone number

programmed, any feature codes stored will apply only to your

primary phone number, or NAM 1.

See “NAM selection” on page 45 for details on NAM.

Storing codes

1. Press Menu 4 4 5 (Settings - Network services -

Network feature setting)

2. At Feature Code:, enter the feature code or

deactivation code received from your dealer

(e.g. ∗74, ∗740, etc.), press OK

3. ^Wto the service that the code applies to and press

Select

4. ^Wto suboption, then Select (Repeat step as

required, based on number of suboptions)

(Use step four only for call forwarding options)

5. ^Wto Activate or Cancel, then press OK

Network services

Some of the features in this menu are network services

that require a subscription. See your service provider for

details and availability.

4-4-1 Voice privacy - See page 72.

4-4-2 Call forwarding * - See page 21.

4-4-3 Call waiting * - See page 24.

4-4-4 Send own number * - See page 62.

4-4-5 Network feature setting - See page 46.

4-4-6 NAM selection - See page 45.

4-4-7 Digital/analog selection ** - See page 33.

4-4-8 Public system selection ** - See page 54.

* These features will not appear in the menu unless they are

activated using Network feature setting. See “Network

feature setting” on page 46 for details.

** These features appear in your phone’s menu only when

needed. Please contact your service provider for details.

One-touch dialing

This feature allows you to make phone calls quickly and

easily with the touch of a button.

You must store names and numbers in your phone

book (see page 50) before you can use this feature.

Then you can assign a name from the phone book to a

one-touch dial location using your phone’s keys 2

through 8.

Note: Keys 1 and 9 are used exclusively for dialing your voice

mailbox (see page 71) and for attempting emergency calls

(see page 83) to the emergency number programmed into your

phone (e.g. 911 or other official emergency number). The 2 key

is for dialing a customer care operator (see page 32), which can

be overwritten if you prefer.

Assigning one-touch dial locations

1. Press Names, scroll to 1-touch dialing and press

Select

2. Scroll to next available empty location, (empty) will

appear, then press Assign

3. Scroll to select desired name and press Select

4. Repeat as necessary

Calling a number using one-touch dialing

Note: The 2 key is for dialing a customer care operator, which

can be overwritten if you prefer.

Press and hold the key (2 through 8) for a few

seconds to call the number in the corresponding

one-touch dial location.

Note: If you press and hold 1, your phone calls your voice

mailbox. If you press and hold 9, and Emergency key 9 (Menu

4 1) is ON, your phone attempts a call to the emergency

number programmed into your phone (e.g. 911 or other official

emergency number).

Changing numbers in one-touch dial list

With this feature, you can assign a different number to

any one-touch dial location.

1. Press Names, scroll to 1-touch dialing and press

Select

2. Scroll to the location you wish to change and press

Options

3. Scroll to Change, then press Select

4. Scroll through phone book to select new number

and press Select

Erasing one-touch dial locations

1. Press Names, scroll to 1-touch dialing and press

Select

2. Scroll to the location you wish to erase and press

Options

3. Scroll to Erase, press Select, then press OK at

Erase?

Outbox

This is where all outgoing messages are stored.

See “T e xt messages and pages” on page 64 for more details.

Paging

You can receive pages with your phone.

See “T e xt messages and pages” on page 64.

Phone book

You can store up to 199 numbers and associated

names in your phone’s memory. These numbers are

right at your fingertips for easy dialing.

Things to know about the phone book

Stored numbers may be up to 32 digits long.

Stored names may be up to 16 characters long.

You can not store identical names into your phone

(i.e., John, John); make sure that like names are

somewhat different in the phone book (i.e., John,

Johnny).

Replace? followed by the currently stored name displays

when storing a name already in memory.

Accessing the phone book

Press Names, scroll to desired submenu and press

Select.

About the submenus

The phone book has several submenus from which you

can choose.

Search allows you to search for a specific name.

Add new allows you to enter new names and numbers.

Options lets you choose your scrolling view, as well as

to show memory status.

1-touch dialing allows you to assign up to seven one-

touch dial locations (see page 47 for details).

Caller groups allows you to rename or change the

ringing tone for a caller group (see“Call forwarding” on

page 21).

Erase all lets you erase every name and number in your

phone book. You can erase one name and number at a

time by pressing Details, then Options when viewing a

name already in the directory.

Storing a name and number

1. Press Names

2. Scroll to Add new and press

Select

3. Enter name using the keypad

(use # to switch between

upper and lower case) and press OK

4. Enter phone number and press OK

Also, see “Entering letters and numbers” on page 35 and

“Quick save” on page 63.

Changing a number stored with a name

1. Recall stored name, then press Details to view

number

2. Press Options, scroll to Edit and press Select

3. Press OK while name is displayed, unless you wish

to change it. If so, press and hold Clear, re-enter

name and press OK

4. Press and hold Clear to erase number or use the ^W

and ^Vkeys to edit

5. Enter new number

6. Press OK to save new number

Recalling names & numbers

At the start screen, press ^Wor ^Vto view names in

directory. Then scroll to the person you wish to call and

press

to dial the number (phone will display

number dialed to confirm).

Recalling numbers by name

At the start screen, press Names. Then press the

number on the keypad with the corresponding first

letter of the name you wish to call.

You can also recall numbers by name by pressing

Names, then press Select at Search. Enter the name of

the person you wish to recall and press OK.

Erasing stored names and numbers

1. Recall stored name

2. Press Details

3. Press Options

4. Highlight Erase, then press Select, then OK

Note: You can not undo Erase functions, so be careful!

Erasing your entire phone book

1. Press Names

2. Scroll to Erase all and press Select

3. Press OK at Are you sure?

4. Enter security code at Security code: and press OK

Warning: This feature will erase your entire phone book,

which can not be undone!

Phone lock

When you turn this on, your phone will lock after you

switch your phone off and back on. Then, each time you

turn your phone on, it will prompt you for a lock code

when you press either Names or Menu.

When the phone lock is on, you can not access most of

your phone’s memory and menu features, or make

phone calls without entering the lock code.

Turning on phone lock

Press Menu 4 3 2 1 (Settings - Security settings - Access

codes - Phone lock). Enter the lock code then press OK.

Then scroll to On, and press OK again.

When your phone is locked, calls may be possible to

the emergency number programmed into your phone

(e.g. 911 or other official emergency number) including

calls with Emergency key 9 (page 34).

You can also store a number in the Unlocked phone

number location, which allows you to call this number

even though your phone is locked (see page 70 for

details).

Answering a call with phone lock on

Press any key except

and

Turning off phone lock

Press Menu 4 3 2 1 (Settings - Security settings - Access

codes - Phone lock). Enter lock code and press OK.

Then scroll to Off and press OK again.

With phone lock off, you can now use your phone

without entering the lock code each time you turn your

phone on.

Phone settings

Phone settings allow you access to other phone features

such as an alarm clock and your phone’s language.

Using phone settings

Press Menu 4 2 (Settings - Phone settings), then scroll to

one of the following options, then press Select:

4-2-1 Clock - See page 30.

4-2-2 Alarm clock - See page 16.

4-2-3 Touch tones - See page 68.

4-2-4 Restore factory settings - See page 56.

4-2-5 Language - See page 41.

4-2-6 Keypad cover setting - See page 8.

Profiles

Now you can adjust and customize

your phone to whatever

environments you find yourself in

(i.e. meetings, a movie, etc.).

With Profiles, you can control your

phone’s ringing volume, ringing tone, message alert,

keypad tones, warning tones, etc., in a matter of seconds.

Note: Restore factory settings (see page 56) will reset any

changes made in Profiles back to the factory defaults.

The default setting is Normal.

Accessing Profiles

Press Menu 3

Selecting different Profiles

^{again to}ð^{scroll through}

key for a

the

each choice, then press and hold the

second to select that Profile.

^{If yo}ð^{u want to change your phone’s Profile, quickly press}

key. Quickly press

You can also scroll through the list of Profiles with a

quick press of the key. Then press ^Wor ^Vto choose

another Profile and press OK.

Either way, this only allows you to select other Profiles;

you can not customize them here. Keep reading to learn

how to customize a Profile.

Customizing Profiles

Press Menu 3 (Profiles) and scroll to desired Profile, then

press Options.

Once Options is selected, Select, Customize and Rename

will appear as your choices. Once you have selected

one of these items, press OK. If you wish to go back to

the main menu, press Back.

Select activates the currently highlighted Profile.

Customize allows you to customize a Profile by changing

the current settings.

Rename allows you to rename the Profile.

When you select Customize, press OK and you’ll have

access to several lists and sub-menus that will enable

you to adjust the settings on the current Profile.

Note: Car and Headset will not appear in the Profiles list unless

your phone is connected to a car kit or a headset. However,

they will remain in the menu once connected for the first time.

Note: When you change a setting in the current Profile, it only

affects that Profile and will not change your phone’s normal

settings.

Renaming Profiles

1. Press Menu 3 (Profiles)

2. Scroll to desired Profile and press Options

3. Scroll to Rename and press OK

4. Enter new name and press OK again

Note: Some profiles can not be renamed.

Public system selection

Note: This feature will not appear in your phone until needed.

Please contact your service provider for details.

In each service area there are usually two service

providers. The service provider you sign up with, also

known as your home system, is of type A or B. Systems

that are of the same type as your home system are

called “home-type” systems; systems that are of the

opposite type as your home system are called

“non-home-type” systems.

Public system selection allows your phone to search for

other available systems when service is not available in

your home system.

You can also request the order in which your phone

looks for available systems.

Note: Using Home only or Any system is usually the most

economical choice.

1. Press Menu 4 4 8 (Settings - Network service - Public

system selection).

2. Scroll to one of the following choices:

Any system The phone searches for service in a

home-type system and if service is not found it will

then search for a non-home type system.

Home type The phone searches for a service in a

home-type system only.

Nonhome type The phone searches for a service in

a non-home type system only (doesn’t find a home

system since it doesn’t search for a home-type

system).

Home only Your phone uses its home system only

(that is, it will not roam).

3. Press OK.

Received calls

This shows you the phone numbers of the 10 most

recent calls you’ve answered.

Press Menu 2 3 (Call log - Received calls), then scroll

through the numbers.

Also, see “Call log” on page 22 for details on other call lists.

The ‘Options’ soft key

See “The ‘Options’ soft key” on page 23.

Restore factory settings

You can reset the settings of many of your phone’s

features to factory defaults (as in a new telephone).

Restoring factory settings

Press Menu 4 2 4 (Settings - Phone settings - Restore

factory settings), enter security code and press OK.

Note: The memory, timers, language selection and security

code are not reset. However, any Profiles you have modified will

reset when you restore your settings.

Renaming profiles

See “Profiles” on page 53.

Restrict calls

This feature allows you to restrict incoming and outgoing

calls. Outgoing calls are restricted from a list of

restrictions that you create yourself.

Restrict outgoing calls

If no restrictions have been defined in your phone, you

will notice only one option:

Add restriction allows you to create your own list of

outgoing call restrictions. The maximum number of call

restriction groups you can define is 10.

Once you have entered Add restriction and have added

at least one restriction, the following options will be

added:

Select allows you to select call restrictions from the

outgoing calls list.

Edit allows you to edit an existing outgoing call restriction.

Erase will erase any existing outgoing call restrictions.

Note: When calls are restricted, calls may be possible to the

emergency number programmed into your phone (e.g. 911 or

other official emergency numbers). However, Emergency key 9

may not operate depending on the type of restriction you

choose.

Adding call restrictions

1. Press Menu 4 3 1 (Settings - Security settings -

Restrict calls)

2. Scroll to Restrict outgoing calls and press Select

3. Enter the security code and press OK

4. Scroll to Add restriction to create an outgoing call

restriction and press OK

5. Enter the number string you wish to restrict and

press OK. For example:

If you wish to restrict all calls that begin with 1,

enter 1 (this will restrict all long distance calls)

If you wish to restrict all calls that begin with 1972,

enter 1972

If you wish to restrict all calls that begin with 214,

enter 214

6. If you wish to enter a name for the call restriction,

enter the name using your phone’s keypad, then

press OK

Restrict incoming calls

1. Press Menu 4 3 1 (Settings - Security settings -

Restrict calls)

2. Scroll to Restrict incoming calls and press Select

3. Scroll to All calls and press Mark (or press Unmark

if you wish to remove the restriction)

Selecting call restrictions

1. Press Menu 4-3-1 (Settings - Security settings -

Restrict calls)

2. Scroll to Restrict outgoing calls and press Select

3. Enter the security code and press OK

4. Scroll to Select and press OK

5. Scroll to each restriction you wish to use and press

Mark; press Unmark to deactivate existing restrictions

6. Press Back and then press Yes at Save changes?

Editing call restrictions

1. Press Menu 4-3-1 (Settings - Security settings -

Restrict calls)

2. Scroll to Restrict outgoing calls and press Select

3. Enter the security code and press OK

4. Scroll to Edit and press OK

5. Scroll to the restriction you wish to edit, press OK

Note: If no name has been entered for a restriction, the

restricted number will be displayed

6. Press and hold Clear to erase entire number, then

enter the new characters. Or use ^Wýor ^Vto move

the cursor to the desired location and delete a

character or insert additional characters. Press OK

when finished.

7. Edit name if desired using same procedure as above

Erasing call restrictions

1. Press Menu 4-3-1 (Settings - Security settings -

Restrict calls)

2. Scroll to Restrict outgoing calls and press Select

3. Enter the security code and press OK

4. Scroll to Erase and press OK

5. Scroll to the restriction you wish to erase, press OK

6. Press OK again to erase restriction

Ringing options

This is one of the settings in your phone’s Profiles

(see page 53). You can choose how your phone notifies

you of an incoming call. This setting does not affect

incoming text message alert tones (see page 64).

Selecting ringing options

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use ^Wto highlight the

one you want to set the ringing options for and

press Options.

3. Highlight Customize and press OK. Press ^Wto

Ringing options, then press Select.

4. Highlight either Ring, Ascending, Ring once, Beep

once, Caller groups, or Silent and press OK

Caller groups sets the phone to Silent except for calls

from people in selected caller groups (see “Call

forwarding” on page 21).

Press ^Wor ^Vto highlight the desired caller group(s),

then press Mark to select or Unmark to de-select them.

Ringing tones

This is one of the settings in your phone’s Profiles (see

page 53). Itsetstheringing toneforincomingvoicecalls.

If you set Ringing Options (see page 58) to Silent or Beep

once, ringing tones are automatically off.

Selecting ringing tones

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use ^Wto highlight the

one you want to set the ringing tones for and press

Options.

3. Highlight Customize and press OK. Press ^Wto

Ringing tones, then press Select.

4. Scroll through the options. After you hear the tone

you wish to use, press OK.

Ringing volume

This is one of the settings in your

phone’s Profiles (see page 53).

It sets the default ringing volume for

incoming voice calls, message alert

tones and the alarm.

Setting the ringing volume

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use^Wto highlight the

one you want to set the ringing volume for and

press Options.

3. Highlight Customize and press OK. Press ^Wto

Ringing volume, then press Select.

4. Scroll through the options. When you hear the

volume level you wish to use, press OK.

Note: The ringing volume setting is stored individually for the

handsfree car kit and the headset.

Roaming

This is a term used to indicate that your phone is not in

its home area. Calls made or received while roaming are

usually more expensive than calls made in your home

area.

When roaming in some systems outside your home

area, your phone may not be recognized by the host

system (the one you’re travelling in) and you may not be

able to place a call.

Contact your service provider for more specific

information on how roaming works with your phone, as

well as any information on coverage limitations.

Roaming Indicators

When your phone begins roaming, it will beep once and

display ROAM or EXTENDED AREA, depending on how

roaming works with your phone. Contact your service

provider for more details. If your phone is not roaming

(i.e. in its home area) it will either display HOME or the

name of the service provider.

Saved

This is where saved text messages are stored.

See “T e xt messages and pages” on page 64 for details.

Scrolling view

There are three different options on how you can view

the phone book. Your choices are:

Name list shows all stored names in a scrolling list.

Three names will appear at any given time. To view

other names in the directory, scroll back and forth

through the list using ^Wor ^V. Name list is the default

setting.

Name+number displays individual names and numbers

stored in your directory. Only one name will display on

your screen at a time, with the corresponding phone

number. Use ^Wor ^Vto view other names.

Name only shows individual names only. To view other

names, use ^Wor ^V. You can view the corresponding

phone number by pressing Details, then ^Wor ^V.

Selecting your scrolling view

1. Press Names

2. Scroll to Options, then press Select

3. Press Select at Scrolling view

4. Press ^Wor ^Vto select either Name list,

Name+number, or Name only, then press OK

Security settings

This menu includes the following security features:

4-3-1 Restrict calls - See page 56.

4-3-2 Access codes - See page 16.

The Access codes submenu includes Phone lock(page 52),

Unlocked phone number (page 70), Change lock code

(page 42), and Change security code (page 62).

Security code

Your phone will prompt you for a security code for certain

features. These features can be used only after the

correct security code has been successfully entered.

Note: When entering your security code, ***** will appear on the

display to keep others from viewing your code.

If you make a mistake entering the code, erase the last

digit entered by pressing Clear, or press and hold Clear.

Then enter the correct code or press Back to exit the

current feature.

If you enter an incorrect security code (Code error will

appear) five times in a row, your phone won’t accept

any entries for the next five minutes.

Your phone’s default security code is 12345. It’s highly

recommended that you change this code at once, write it

down, and store it in a safe place away from your phone.

Changing your security code

1. Press Menu 4 3 2 4 (Settings - Security settings -

Access codes - Change security code)

2. Enter security code and press OK

3. Enter new security code at Enter new security

code:, press OK

4. Enter new security code again at Verify new

security code:, press OK

5. Phone will display Security code changed

Note:Ifyouhavechangedyour securitycodeanddon’tremember

the new code, contact your service provider. Once you have

changed your security code, the default setting is no longer valid.

Send own number

In most service areas, when you call someone your

name will be presented to his/her caller ID (if they

subscribe). This feature allows you to block their caller

ID (i.e. your number will not be presented) when you call

them. This feature works on a per-call basis. Contact

your service provider for more details.

Note: Before you can deactivate this feature, you must first

store the feature code given to you by your service provider.

Otherwise, this feature may not appear in the menu.

See “Network feature setting” on page 46 for more details.

Note: This feature is only effective when calling to a number that

is equipped with Caller ID.

1. Press Menu 4 4 4 (Settings - Network services - Send

own number)

2. ^Wto Yes (to show your number) or No (to not show

it) and press OK

3. Enter the number you wish to call (or press Search

to retrieve the number from the phone book and

press OK), then press OK

4. Your phone will attempt to call this number with

the feature code you stored in Menu 4 4 5

(see “Network feature setting” on page 46)

Settings

This main menu allows you access to other features.

See these individual entries for more information.

4-1 Call settings - See page 23.

4-2 Phone settings - See page 52.

4-3 Security settings - See page 61.

4-4 Network services - See page 47.

Storing a name & number

You can save names and numbers in the Phone book.

Either use the method described in “Storing a name and

number” on page 50 or the “quick save” method

described below.

Quick save

Enter the phone number and press Save. Enter a name

at Name: if you wish (optional), then press OK.

Also, see “Entering letters and numbers” on page 35.

System

Your phone is capable of working in Residential, Private,

and Public Systems (such as your Home System). You

can choose how your phone selects a network to use.

This feature is Menu 5 in your phone. The default is

Automatic, which means your phone automatically

searches for networks available to you and chooses the

appropriate one. Every time you switch on your phone,

it resets this to Automatic.

If you choose Manual, your phone searches for

networks, then begins displaying them. Your phone

displays AVAILABLE: or NOT AVAILABLE: for the

systems it finds (You can not use NOT AVAILABLE:

systems). Use the ^Wkey to scroll through the choices,

and press OK when you see the one you want.

If you choose New Search, your phone begins a new

search for new Private and Residential systems. When

it finds the best new system, it displays it. You can then

Select it, or start another search by pressing Next.

Note: If you have two phone numbers (two NAMs), the Manual

and New search features are only used with your primary

phone number (NAM 1). See “NAM selection” on page 45 for

more information concerning NAMs.

To switch from private to public

If you are in a private system and want access to a

public system, press and hold Menu when you are not

in a call. Your phone will display Search public systems?,

press OK and your phone will use the public system for

the next (only once) outgoing call. After that it goes back

to Automatic system selection.

Text messages and pages

Before you can send or receive messages and pages,

you must subscribe to the text messaging network

service.

Some or all of these features may not be available in

some wireless systems. Please see your service

provider for details and availability.

Note: Text messages that you receive with your phone may

appear different at times, due to messages that originate in

networks other than your own.

Also, the maximum length of a text message may depend on

the network’s capabilities.

Text message options

When you access Text messages, you will view a screen

with five different options.

Inbox is where incoming messages are received and

stored. All new, unread messages are kept here.

Saved is where all saved and read messages are kept.

Write new allows you to write text messages.

Outbox is where outgoing messages are stored.

Erase all allows you to erase all text messages. However,

unread text messages will not be erased. Erase all can

be found quickly when you access Text messages by

pressing ^V.

Writing text messages

Note: Writing and sending text messages may not be available

in all wireless systems. Please contact your service provider for

details.

Sending text messages

1. Press Menu 1 1

2. Scroll to Write new and press Select

3. Write your message using the keypad and press

Options

4. To send the text message, press OK with Send

highlighted

5. Enter the phone number (or press Search to locate

in the phone book), then press Send

Sending options

If you press Options when sending a text message,

you’ll find the following choices:

Send sends the message.

Settings allows you to tag your messages (see below).

Save will save your message to the Saved folder.

Clear screen will clear the message screen.

Message settings

Urgent will notify recipient that your message is important.

When you receive an Urgent message, the message will

be marked with an exclamation point (!) in front of it.

Read receipt notifies you that the recipient has opened

your message.

Callback no. will place your phone number within the

message. This is the default setting and it is set to on.

Receiving text messages

Your phone has space for up to 30 text messages,

depending on the length of each message.

When you receive a text message

Text messages are shown in the order that they were

received, in their order of priority.

Message received indicates an unread message or page.

If more than one message is received, the number of

received messages will be listed first.

New emergency message indicates that the message or

page received was sent by someone via the service

provider. Emergency messages are sent only in

situations where life and/or property are in immediate

danger. Emergency messages are listed first and will

override all other messages.

Urgent messages are also high priority messages.

Reading text messages

With Message received displayed, press Read and scroll

to new message, then press Read again

Reading options

Press Options while a text message is displayed to

access the following reading options:

Read next allows you to read the next message.

Erase will erase the message.

Save will save the message to the Saved folder.

Call back will automatically call whoever sent the message

if any phone numbers are included within the message.

Forward allows you to forward the message to someone

else.

Reply allows you to reply to the received message.

Calling someone back in a message

Press

number quickly.

while the message is displayed to dial the

Or, with the message and the phone number displayed

on your phone’s screen, you can press Options, scroll

and select Call back, then press OK.

Note: If more than one number is on the display, the numbers

to call and press

display No number found on this screen.

^{are displayed in a}ó^{list. Simply select the phone number you want}

. If no numbers are found, your phone will

Forwarding a message

Note: This feature is only available if your phone has been

activated in a wireless system that supports the sending of text

messages.

With the message displayed, press Options, scroll to

Forward and press OK. Then send the message as you

normally would.

Replying to a message

Note: This feature is only available if your phone has been

activated in a wireless system that supports the sending of text

messages.

With the message displayed, press Options, scroll to

Reply and press OK. Then write your reply and send the

message as you normally would.

If a phone number appears in the message you received,

it’s used as the default for the reply you’re sending. This

can be replaced by another number, if you wish.

Receiving a page

Your phone displays Message received. The message

reads Call:, followed by the name or number of the

person who paged you. Names will appear only if that

person has been stored in the phone book.

When your phone’s memory is full

One or more messages, of lowest priority, will

automatically be deleted in order to receive new text

messages when your phone’s memory is full.

If the message memory is still full, your phone will

display No space: message waiting. You can clear this

notification by pressing OK.

Note: Messages are usually deleted from your Inbox. An

incoming emergency message may delete messages from your

Saved folder.

Touch tones

Your phone can generate various sounds, called touch

tones, when the keys are pressed. These are also

known as DTMF tones.

Touch tones can be used for many automated, over-

the-phone services such as checking bank balances,

airline arrival and departure times, and using voice

mailbox options. Touch tones can be sent only when a

call is active.

Storing touch tone strings

Touch tone strings can be used for sending and

receiving information with your phone. For example, you

can store your office voice mailbox number, along with

your password for easy access to your messages.

Store touch tone strings the same way you store

phone numbers (see page 50).

You can store a whole digit sequence in your phone

book and send it as touch tones for frequently-used

strings of numbers.

Sending a touch tone string

Make sure Menu 4 2 3 1 (Settings - Phone settings -

Touch tones - Manual touch tones) is not set to Off.

1. During a call, press Options

2. Scroll to Touch tones and press OK

3. Enter touch tone string or recall string from the

phone book and press OK

Note: Use caution when sending confidential information over

the air when using DTMF tones in analog mode.

Storing touch tone strings with phone numbers

1. Enter the phone number (e.g. your office voice

mailbox)

2. Press ∗∗∗ (p) or ∗∗∗∗ (w)

3. Enter the touch tone string (e.g. voice mailbox

password)

4. Store the number as you normally would

Note: See “Special characters (for storing numbers)” on

page 37 for details on “p” and “w” characters.

When you dial this number, your phone first dials the

phone number, then waits (because of the “w” character)

for you to press Send. Your phone then sends your

password.

If you include a “p” character instead of a “w”, your

phone pauses for 2.5 seconds, then automatically

sends your password as touch tones.

Touch tone length

This feature determines the length of each touch tone

when they are sent automatically.

Short sets the tone length to .1 second. Long sets the

tone length to .5 second.

You can set the touch tone length by pressing Menu

4 2 3 2 (Settings - Phone settings - Touch tones - Touch

tone length).

Unlocked phone number

When the phone lock is on (see page 52), no calls can

be made. However, you can store one number into your

phone that can be called when it’s locked.

Storing the unlocked phone number

1. Press Menu 4 3 2 2 (Settings - Security settings -

Access codes - Unlocked phone number)

2. Enter lock code and press OK

3. Enter phone number at Number: (or press Search

and scroll through the phone book)

4. Press OK

Calling the unlocked phone number

Note: Your phone must be locked to use this feature.

Press ^Wor ^Vonce, then

enter the phone number as it is stored and press

or you can manually

Vibrating alert

This is one of the settings in your phone’s Profiles

(see page 53). When your phone has the vibrating

battery attached, you can set your phone to vibrate

when you receive a voice call.

Note: This setting will not appear in your phone unless a

vibrating battery has been attached.

Activating vibrating alert

1. Press Menu 3 (Profiles)

2. Your phone lists each Profile. Use ^Wto highlight the

one you want to set the vibrating alert for and press

Options.

3. Highlight Customize and press OK. Press ^Wto reach

Vibrating alert, then press Select again.

4. Use ^Wto highlight On or Off and press OK. If you

choose On, your phone will vibrate even if you have

set Ringing options (see page 58) to Silent.

Note: The vibrating alert does not work when your phone is

connected to any charger or car kit.

Voice mailbox number

This number dials your voice mailbox.

See “Voice messages” in next section.

Voice messages

Voice mail is a network service that may require a

subscription from your service provider.

Your phone will notify you when you receive a voice

message. New voice message will appear on the display

along with the

icon, and you’ll hear a short beep.

Your phone will display the number of voice messages

if you’ve received more than one.

Storing your voice mailbox number

Before you can retrieve any voice messages, you need

to store your voice mailbox number. Your service

provider usually gives this number to you.

When you’re ready to store your voice mailbox number,

press Menu 1 2 2 (Messages - Voice messages - Voice

mailbox number). Then enter your voice mailbox phone

number and press OK. This number can be up to 32

digits long and is used until it’s changed. So if your

phone number changes, you may need to change your

voice mailbox number along with it.

Greetings, passwords, and prompts

These may vary in different wireless systems. So if you

need information about how to record your greeting or

how to store your password, contact your service

provider. You’ll also need to contact them on how to

listen to voice messages once you’re connected to your

voice mailbox.

Listening to your voice messages

If New voice message is displayed, just press Listen and

follow the prompts. If you’d rather listen to your

messages later, press Exit.

You can listen to messages anytime if you press and

hold the 1 key; Calling voice mailbox will appear on the

display. Or if you prefer, you can access your voice

mailbox by pressing Menu 1 2 1 (Messages - Voice

messages - Listen to voice messages).

Voice privacy

Note: This feature may not be available in all areas. Please see

your service provider for details and availability.

Used only in digital networks, voice privacy encrypts the

voice channel so that people can not eavesdrop on your

conversation.

Voice privacy will become active only during a call and

will notify you with a beep. Voice privacy active will also

appear on the display.

If you turn this feature on and voice privacy becomes

inactive for any reason, your phone displays Voice

privacy not active and beeps.

You may set this to On or Off by pressing Menu 4 4 1

(Settings - Network services - Voice privacy).

Volume

You can adjust the ringing volume and earpiece volume

of your phone.

See “Earpiece volume” on page 33 and “Ringing volume” on

page 59.

Warning and game tones

This is one of the settings in your phone’s Profiles

(see page 53). Warning tones include tones your phone

makes for conditions such as errors, confirmations,

power on, battery low, recharge battery and games.

You can set warning and game tones on or off.

Turning warning and game tones on and off

1. Press Menu 3 (Profiles)

2. Your phone lists each Profile. Use ^Wto highlight the

one you want to set the warning and game tones

for and press Options.

3. Highlight Customize and press OK. Press ^Wto

Warning and game tones, then press Select.

4. Scroll to On or Off and press OK

Welcome note

You can program a welcome note into your phone to

display a message when you first turn it on (i.e. hello,

your name, a reminder, etc.). The maximum length is 36

characters.

1. Press Menu 1 3 (Messages - Welcome note)

2. Enter new message or edit an existing one, then

press Options

3. Press ^Wto Save or Erase and press OK

The welcome note displays each time your phone is

switched on. Characters you enter are added to the left of

the cursor. Press Clear to delete characters to the left of

the cursor. Press ^Wor ^Vto move the cursor right or left.

See “Entering letters and numbers” on page 35 for details.

Write new

This feature allows you to write text messages with your

phone.

See “T e xt messages and pages” on page 64 for more details.

6. Accessories

If you want to enhance your phone’s functionality, an

extensive range of accessories is available for you.

You can select any of these items to help accommodate

your specific communication needs. For availability of

these and other accessories, contact your service

provider.

A few practical rules for accessory operation:

Keep all accessories out of reach of small children.

When you disconnect the power cord of any

accessory, grasp and pull the plug, not the cord.

Check regularly that any vehicle-installed

accessories are mounted and are operating

properly.

Installation of any complex car accessories must

be made by qualified personnel only.

Use only batteries, chargers and accessories approved by the

phone manufacturer for use with this particular phone model.

The use of any other types may invalidate any approval or

warranty applying to the phone, and may be dangerous.

See page 6 for important battery usage information.

Batteries

The following table shows battery options that are

available for your phone, charging times with the Rapid

Travel Charger (ACP-9U) and the Standard Travel

Charger (ACP-7U), talk times, and standby times.

Consult your service provider for more information.

Charging Times

ACP-7U ACP-9U

Charger Charger

Battery Option

BPS-1 Ultra Slim Li-Polymer Battery 600 mAh

BLS-2N Extended Li-Ion Battery 900 mAh

BMS-2/BMS-2S Extended NiMH Battery 900 mAh

BMS-2V Vibrating NiMH Battery 900 mAh

BLS-4 Extended Li-Ion Battery 1500 mAh

2 hrs 30 min 1 hr 20 min

4 hrs

5 hrs

2 hrs

1 hr 30 min

3 hrs 30 min

Note: The times displayed above are approximate and will allow

your battery to obtain approximately 80% of its capacity. At this

time, the battery scroll bars on your phone’s display will stop

scrolling. If you wish to obtain 100% battery capacity, please

allow another two hours to “trickle” or “maintenance” charge.

Standby and Talk Times

Digital

Talk Time Talk Time

Analog

Standby

Time

Battery Option

BPS-1 Ultra Slim

Li-Polymer Battery

600 mAh

1 hr 20 min to

2 hrs 10 min

40 min to

1 hr 15 min 20 to 33 hrs (ana)

66 to 133 hrs (dig)

BLS-2N Extended Li-Ion

Battery 900 mAh

2 hrs to

3 hrs15 min

1 hr to

100 to 200 hrs (dig)

1 hr 50 min 30 to 50 hrs (ana)

BMS-2/BMS-2S

Extended NiMH

Battery 900 mAh

2 hrs to

3 hrs 15 min

1 hr to 100 to 200 hrs (dig)

1 hr 50 min 30 to 50 hrs (ana)

BMS-2V Vibrating NiMH

Battery 900 mAh

2 hrs to

3 hrs 15 min

1 hr to

100 to 200 hrs (dig)

1 hr 50 min 30 to 50 hrs (ana)

BLS-4 Extended Li-Ion 3 hrs 10 min to 1 hr 35 min to 170 to 335 hrs (dig)

Battery 1500 mAh 5 hrs 10 min 2 hrs 50 min 50 to 83 hrs (ana)

Note: The times shown are approximate.Battery operation

times vary according to signal conditions, network parameters

set by the service provider, and how you use your phone.

Chargers & Other Accessories

The following chargers and other accessories are

available for your phone; please see your dealer for

details. Also, refer to the accessories brochure that was

included in your sales package for the entire line of

Nokia Original Accessories.

Note: When a charger is not in use, disconnect it from the

power source. Do not leave the battery connected to a charger

for longer than a week, since overcharging may shorten its life.

If left unused, a fully charged battery will discharge itself over

time.

Standard Travel Charger

(ACP-7U)

This lightweight (187g) and

durable AC charger can be

used with all battery options.

To use the Standard Travel

Charger, plug it into a wall

outlet and connect the lead

from the charger to the base of

your phone. The charger can also be used together with

the Compact Desktop Charging Stand (DCH-9).

Rapid Travel Charger (ACP-9U)

This lightweight (100g) AC charger

can be used with all battery options.

Calls can be made during charging,

even with a fully discharged battery.

To use the Rapid Travel Charger

(ACP-9U), plug it into a standard

120V AC wall outlet, and connect

the lead from the charger to the base

of your phone.

The charger can also be used together with the optional

Compact Desktop Charging Stand (DCH-9).

Approximate charging times for discharged batteries

are shown at the beginning of this section.

Rapid Cigarette Lighter Charger (LCH-9)

You can charge your

phone’s battery from your

vehicle battery by using

the Rapid Cigarette

Lighter Charger (LCH-9).

You can also use this

lightweight charger with

the Compact Desktop Charging Stand (DCH-9).

Calls are possible during charging. A green light

indicates the charger is ready for charging (when not

charging) or finished charging (if it has been charging).

The battery charging times are the same as those for

the Rapid Travel Charger (ACP-9U)

The input voltage range is from 11 to 32V DC, negative

grounding. Avoid prolonged charging with the Rapid

Cigarette Lighter Charger (LCH-9) when the car engine

is not running; this may cause the battery of your car to

drain. Note also that in some cars the cigarette lighter

plug is not provided with electricity if the ignition is not

switched on.

Compact Desktop Charging Stand (DCH-9)

Used together with the

Standard Travel Charger

(ACP-7U) or the Rapid Travel

Charger (ACP-9U), the

Compact Desktop Charging

Stand (DCH-9) is an

economical choice when you

need your phone close at hand, always ready for calls.

This charging stand allows you to charge your phone’s

battery in the front charging slot, plus a spare battery in

the rear charging slot.

When charging both batteries simultaneously, charging

will begin in the front charging slot and then move to the

rear slot once the front battery is 100% charged.

Please refer to the chart below for charging times in the

rear charging slot.

DCH-9 Rear Slot Charging Times

Using ACP-7U

Using ACP-9U

Battery Option

When front When front When front When front

slot empty occupied slot empty occupied

BPS-1 Ultra Slim

Li-Polymer 600 mAh 30 min

4 hrs

6 hrs

30 min

4 hrs

30 min

3 hrs

BLS-2N Extended

Li-Ion 900 mAh

BMS-2/BMS-2S

6 hrs

8 hrs

30 min

4 hrs

10 min

5 hrs

25 min

Extended

30 min

NiMH 900 mAh

BMS-2V Vibrating

NiMH 900 mAh

BLS-4 Ultra

Extended

12 hrs

15 hrs

40 min

8 hrs

10 hrs

30 min

Li-Ion 1500 mAh

Note: Please note that if you are charging a battery in the rear

charging slot while another battery occupies the front slot,

please allow an additional two hours for a “maintenance”

charge for the battery in the front slot. Please see page 76 for

charging times for the front charging slot.

If you’re charging a battery in the front charging slot,

charging is indicated by the scrolling battery bars on the

right side of your phone’s display. When the scrolling

stops, the battery is approximately 80% charged.

A battery will be fully charged a couple of hours after the

scrolling stops.

Also, you may notice a light indicator on the stand,

which is used for charging a spare battery. A green light

indicates a battery is at least 80% full; the red light

indicates a battery is charging.

7. Troubleshooting

What if charging fails?

If Not charging is displayed, charging is suspended.

Make sure the battery is connected to an approved

charging device and that the battery is at room

temperature. Extreme temperatures, hot or cold, can

affect your battery’s performance and prevent charging.

If charging still fails, disconnect the charger from your

phone. Then reconnect the charger to your phone and

retry. If you still experience charging problems, contact

your dealer and, if necessary, bring your phone in to

have it serviced. Also remember to bring in your battery

and charger.

No service

If you’re outside the wireless service area, No service will

display on your phone. No calls can be made or received,

however, emergency 911 calls may still be possible.

What if the call doesn’t go through?

Your phone can make and receive calls only when it’s

switched on and in the wireless network’s service area.

No service means that you’re probably outside the

wireless service area. No calls can be made or received.

See “Get a good signal” on page 7.

Check call restrictions means calls to the phone number

you tried to call are restricted (see “Restrict calls” on

page 56), or your phone is locked (see “Phone lock” on

page 52).

Note: Check with your service provider for information about

when you need to dial a ‘1’ and/or an area code in addition to

the number.

If you make a mistake dialing

Press Clear to delete the last character entered, or press

and hold Clear to delete all characters entered.

8. Reference Information

Important Safety Information

Traffic Safety

Do not use a hand-held telephone while driving a vehicle.

If using a hand-held phone park the vehicle before conversing.

Always secure the phone in its holder; do not place the phone

on the passenger seat or where it can break loose in a collision

or sudden stop.

The use of an alert device to operate a vehicle’s lights or horn

on public roads is not permitted.

Remember, road safety always comes first!

Operating Environment

Remember to follow any special regulations in force in any area

and always switch off your phone whenever it is forbidden to

use it, or when it may cause interference or danger.

When connecting the phone or any accessory to another

device, read its user’s guide for detailed safety instructions.

Do not connect incompatible products.

As with other mobile radio transmitting equipment, users are

advised that for the satisfactory operation of the equipment and

for the safety of personnel, it is recommended that the equipment

should only be used in the normal operating position (held to

your ear with the antenna pointing over your shoulder).

Electronic Devices

Most modern electronic equipment is shielded from radiofrequency

(RF) signals. However, certain electronic equipment may not be

shielded against the RF signals from your wireless phone.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation

of 6 inches (20 cm.) be maintained between a handheld wireless

phone and a pacemaker to avoid potential interference with the

pacemaker. These recommendations are consistent with the

independent research by and recommendations of Wireless

Technology Research. Persons with pacemakers:

•

Should always keep the phone more than 6 inches (20 cm)

from their pacemaker when the phone is switched on;

•

Should not carry the phone in a breast pocket;

Should use the ear opposite the pacemaker to minimize

the potential for interference.

•

If you have any reason to suspect that interference is

taking place, switch off your phone immediately.

Hearing Aids

Some digital wireless phones may interfere with some hearing

aids. In the event of such interference, you may want to consult

your service provider.

Other Medical Devices

Operation of any radio transmitting equipment, including cellular

phones, may interfere with the functionality of inadequately

protected medical devices. Consult a physician or the manufac-

turer of the medical device to determine if they are adequately

shielded from external RF energy or if you have any questions.

Switch off your phone in health care facilities when any regula-

tions posted in these areas instruct you to do so. Hospitals or

health care facilities may be using equipment that could be

sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles (e.g. electronic

fuel injection systems, electronic anti-skid (anti-lock) braking

systems, electronic speed control systems, air bag systems).

Check with the manufacturer or its representative regarding

your vehicle. You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Posted Facilities

Switch your phone off in any facility where posted notices so

require.

Potentially Explosive Atmospheres

Switch off your phone when in any area with a potentially

explosive atmosphere and obey all signs and instructions.

Sparks in such areas could cause an explosion or fire

resulting in bodily injury or even death.

Users are advised to switch off the phone while at a refueling

point (service station). Users are reminded of the need to

observe restrictions on the use of radio equipment in fuel

depots (fuel storage and distribution areas), chemical plants

or where blasting operations are in progress.

Areas with a potentially explosive atmosphere are often but not

always clearly marked. They include below deck on boats;

chemical transfer or storage facilities; vehicles using liquefied

petroleum gas (such as propane or butane); areas where the air

contains chemicals or particles, such as grain, dust or metal

powders; and any other area where you would normally be

advised to turn off your vehicle engine.

Vehicles

Only qualified personnel should service the phone, or install the

phone in a vehicle. Faulty installation or service may be dangerous

and may invalidate any warranty which may apply to the unit.

Check regularly that all wireless phone equipment in your

vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases or explosive

materials in the same compartment as the phone, its parts or

accessories.

For vehicles equipped with an air bag, remember that an air bag

inflates with great force. Do not place objects, including both

installed or portable wireless equipment, in the area over the air

bag or in the air bag deployment area. If in-vehicle wireless

equipment is improperly installed and the air bag inflates,

serious injury could result.

Switch off your phone before boarding an aircraft. The use of

wireless telephones in an aircraft may be dangerous to the

operation of the aircraft, disrupt the wireless telephone network

and may be illegal.

Failure to observe these instructions may lead to the suspension

or denial of telephone services to the offender, or legal action, or

both.

Emergency Calls

IMPORTANT!

This phone, like any wireless phone, operates using radio signals,

wireless and landline networks as well as user-programmed

functions which can not guarantee connection in all conditions.

Therefore, you should never rely solely upon any wireless phone

for essential communications (e.g. medical emergencies).

Remember, to make or receive any calls the phone must be

switched on and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone

features are in use. Check with local service providers.

Making an Emergency Call

1. If the phone is not on, switch it on

2. Press the

key to ready the phone for calls. (Press

it twice if there are still digits on the display.)

3. Key in the emergency number for your present

location (e.g. 911 or other official emergency number).

4. Press

^Emergó^{ency numbers vary by location.}

If certain features are in use (Keyguard, restrict calls, etc.), you

may first need to turn those features off before you can make an

emergency call. Consult this document and your local cellular

service provider.

When making an emergency call, remember to give all the

necessary information as accurately as possible. Remember

that your wireless phone may be the only means of

communication at the scene of an accident - do not cut off the

call until given permission to do so.

Radio Frequency (RF) Signals

THIS MODEL PHONE MEETS THE GOVERNMENT’S

REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.

Your wireless phone is a radio transmitter and receiver. It is

designed and manufactured not to exceed the emission limits

for exposure to radiofrequency (RF) energy set by the Federal

Communications Commission of the U.S. Government.

These limits are part of comprehensive guidelines and establish

permitted levels of RF energy for the general population.

The guidelines are based on standards that were developed

by independent scientific organizations through periodic and

thorough evaluation of scientific studies. The standards include

a substantial safety margin designed to assure the safety of all

persons, regardless of age and health.

The exposure standard for wireless mobile phones employs a

unit of measurement known as the Specific Absorption Rate, or

SAR. The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR

are conducted using standard operating positions accepted by

the FCC with the phone transmitting at its highest certified power

level in all tested frequency bands. Although the SAR is deter-

mined at the highest certified power level, the actual SAR level of

the phone while operating can be well below the maximum value.

This is because the phone is designed to operate at multiple

power levels so as to use only the power required to reach the

network. In general, the closer you are to a wireless base station

antenna, the lower the power output.

Before a phone model is available for sale to the public, it must

be tested and certified to the FCC that it does not exceed the

limit established by the government-adopted requirement for safe

exposure. The tests are performed in positions and locations

(e.g., at the ear) as required by the FCC for each model. The

highest SAR value for this model phone when tested for use at

the ear is 1.27 W/kg. While there may be differences between

the SAR levels of various phones and at various positions, they

all meet the government requirement.

The FCC has granted an Equipment Authorization for this model

phone with all reported SAR levels evaluated as in compliance

with the FCC RF exposure guidelines. SAR information on this

model phone is on file with the FCC and can be found under the

Display Grant section of http://www.fcc.gov/oet/fccid after

searching on FCC ID LJPNSW-3ND.

_____________________________________________________

*In the United States and Canada, the SAR limit for mobile phones

used by the public is 1.6 watts/kg (W/kg) averaged over one

gram of tissue. The standard incorporates a substantial margin

of safety to give additional protection for the public and to

account for any variations in measurements.

Care and Maintenance

Your phone is a product of superior design and craftsmanship

and should be treated with care. The suggestions below will

help you to fulfill any warranty obligations and allow you to enjoy

this product for many years. When using your phone, battery,

charger, OR any accessory:

•

Keep it and all its parts and accessories out of small

children’s reach.

Keep it dry. Precipitation, humidity and liquids contain

minerals that will corrode electronic circuits.

Do not use or store it in dusty, dirty areas as its moving

parts can be damaged.

Do not store it in hot areas. High temperatures can shorten

the life of electronic devices, damage batteries, and warp

or melt certain plastics.

•

Do not store it in cold areas. When the phone warms up

(to its normal operating temperature), moisture can form

inside the phone, which may damage the phone's

electronic circuit boards.

•

Do not attempt to open it. Non-expert handling of the

device may damage it.

Do not drop, knock or shake it. Rough handling can break

internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or strong

detergents to clean it. Wipe it with a soft cloth slightly

dampened in a mild soap-and-water solution.

•

Do not paint it. Paint can clog the device’s moving parts

and prevent proper operation.

Use only the supplied or an approved replacement

antenna. Unauthorized antennas, modifications or

attachments could damage the phone and may violate

regulations governing radio devices.

•

If the phone, battery, charger, or any accessory is not

working properly, take it to your nearest qualified service

facility. The personnel there will assist you, and if

necessary, arrange for service.

9. Technical Data

Wireless System

Dual-Band TDMA and AMPS

Weight

165g (5.8 oz) with BMS-2/

BMS-2S 900 mAh NiMH Battery

Size

140 cc

Frequency Range

Lowband

824.04 - 848.97 MHz (TX)

869.04 - 893.97 MHz (RX)

Highband

1850.04 - 1909.92 MHz (TX)

1930.08 - 1989.96 MHz (RX)

Transmitter Output Power

Up to 600mW nominal

Battery Voltage

3.6 V nominal

850 mAh max.

Charging current

Operating Temperature -20°C to + 40°C

(-4°F to + 104°F)

Number of Channels 832 lowband

1997 highband

Number of NAMs

Memory Locations

Memory Capacity

199

Alpha: 16 digits per location

Numeric: 32 digits per location

Nokia, Connecting People and the Original Accessories logos

are trademarks of Nokia Corporation and/or its affiliates.

The information contained in this phone was written for dual-

mode TDMA and AMPS phones.

The right to make changes and improvements to any of the

products described in this guide without prior notice is reserved.

These commodities are authorized by the U.S. Government for

export only to Canada, Mexico, or the United States. They may

not be resold, diverted, transferred, or otherwise disposed of in

any other country, either in their original form or after being

incorporated through an intermediate process into other end-

items, without the written approval of the U.S. Department of

State.

Part No. 9352390 Issue No. 4 Phase 3 Printed in Canada 01/01

10. NOKIA One-Year Limited

Warranty

Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”)

is free from defects in material and workmanship that result in

Product failure during normal usage, according to the following

terms and conditions:

1. The limited warranty for the Product extends for ONE (1) year

beginning on the date of the purchase of the Product.

2. The limited warranty extends to the original purchaser of the

Product (“Consumer”) and is not assignable or transferable to

any subsequent purchaser/end-user.

3. The limited warranty extends only to Consumers who

purchase the Product in the United States.

4. During the limited warranty period, Nokia will repair, or replace,

at Nokia's option, any defective parts, or any parts that will not

properly operate for their intended use with new or factory rebuilt

replacement items if such repair or replacement is needed

because of product malfunction or failure during normal usage.

No charge will be made to the Consumer for any such parts.

Nokia will also pay for the labor charges incurred by Nokia in

repairing or replacing the defective parts. The limited warranty

does not cover defects in appearance, cosmetic, decorative or

structural items, including framing, and any non-operative parts.

Nokia's limit of liability under the limited warranty shall be the

actual cash value of the Product at the time the Consumer

returns the Product for repair, determined by the price paid by

the Consumer for the Product less a reasonable amount for

usage. Nokia shall not be liable for any other losses or damages.

These remedies are the Consumer’s exclusive remedies for

breach of warranty.

5. Upon request from Nokia, the Consumer must prove the date

of the original purchase of the Product by a dated bill of sale or

dated itemized receipt.

6. The Consumer shall bear the cost of shipping the Product to

Nokia in Melbourne, Florida. Nokia shall bear the cost of shipping

the Product back to the Consumer after the completion of

service under this limited warranty.

7. The Consumer shall have no coverage or benefits under this

limited warranty if any of the following conditions are applicable:

a) The Product has been subject to abnormal use, abnormal

conditions, improper storage, exposure to moisture or dampness,

unauthorized modifications, unauthorized connections, un-

authorized repair, misuse, neglect, abuse, accident, alteration,

improper installation, or other acts which are not the fault of

Nokia, including damage caused by shipping.

b) The Product has been damaged from external causes such

as collision with an object, or from fire, flooding, sand, dirt,

windstorm, lightning, earthquake or damage from exposure to

weather conditions, an Act of God, or battery leakage, theft,

blown fuse, or improper use of any electrical source, or damage

caused by the connection to other products not recommended

for interconnection by Nokia.

c) Nokia was not advised by the Consumer in writing of the

alleged defect or malfunction of the Product within fourteen (14)

days after the expiration of the applicable limited warranty

period.

d) The Product serial number plate or the accessory data code

has been removed, defaced or altered.

e) The defect or damage was caused by the defective function

of the cellular system or by inadequate signal reception by the

external antenna.

8. If a problem develops during the limited warranty period, the

Consumer shall take the following step-by-step procedure:

a) The Consumer shall return the Product to the place of

purchase for repair or replacement processing.

b) If “a” is not convenient because of distance (more than 50

miles) or for other good cause, the Consumer shall ship the

Product prepaid and insured to:

Nokia Inc.

Attn: Repair Department

795 West Nasa Blvd.

Melbourne, FL. 32901

c) The Consumer shall include a return address, daytime phone

number and/or fax number, complete description of the

problem, proof of purchase and service agreement (if

applicable). Expenses related to removing the Product from an

installation are not covered under this limited warranty.

d) The Consumer will be billed for any parts or labor charges not

covered by this limited warranty. The Consumer will be

responsible for any expenses related to reinstallation of the

Product.

e) Nokia will repair or authorize the repair of the Product under

the limited warranty within 30 days after receipt of the Product

by Nokia or an Nokia authorized service center. If Nokia cannot

perform repair covered under this limited warranty within 30

days, or after a reasonable number of attempts to repair the

same defect, Nokia at its option, will provide a replacement

Product or refund the purchase price of the Product less a

reasonable amount for usage.

f) If the Product is returned to Nokia during the limited warranty

period, but the problem with the Product is not covered under

the terms and conditions of this limited warranty, the Consumer

will be notified and given an estimate of the charges the

Consumer must pay to have the Product repaired, with all

shipping charges billed to the Consumer. If the estimate is

refused, the Product will be returned freight collect. If the

Product is returned to Nokia after the expiration of the limited

warranty period, Nokia's normal service policies shall apply and

the Consumer will be responsible for all shipping charges.

9. The Product consists of newly assembled equipment that

may contain used components that have been reprocessed

to allow machine compliance with Product performance and

reliability specifications.

10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR

FITNESS FOR A PARTICULAR PURPOSE OR USE, SHALL

BE LIMITED TO THE DURATION OF THE FOREGOING LIMITED

WRITTEN WARRANTY. OTHERWISE, THEFOREGOING LIMITED

WARRANTY IS THE CONSUMER'S SOLE AND EXCLUSIVE

REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES,

EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES,

INCLUDING BUT NOT LIMITED TO, LOSS OF ANTICIPATED

BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE,

PUNITIVE DAMAGES, LOSS OF USE OF THE PRODUCT OR

ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST

OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWN-

TIME, THE CLAIMS OF ANY THIRD PARTIES, INCLUDING

CUSTOMERS, AND INJURY TO PROPERTY, RESULTING

FROM THE PURCHASE OR USE OF THE PRODUCT OR

ARISING FROM BREACH OF THE WARRANTY, BREACH OF

CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER

LEGAL OR EQUITABLE THEORY, EVEN IF NOKIA KNEW OF

THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL NOT

BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE

LIMITED WARRANTY, OR LOSS OF USE DURING THE

PERIOD THAT THE PRODUCT IS BEING REPAIRED.

11. Some states do not allow limitation of how long an implied

warranty lasts, so the above one-year warranty limitation may

not apply to you (the Consumer). Some states do not allow the

exclusion or limitation of incidental and consequential damages,

so certain of the above limitations or exclusions may not apply

to you (the Consumer). This limited warranty gives the Consumer

specific legal rights and the Consumer may also have other

rights which vary from state to state.

12. Nokia neither assumes nor authorizes any authorized

service center or any other person or entity to assume for it any

other obligation or liability beyond that which is expressly

provided for in this limited warranty including the provider or

seller of any extended warranty or service agreement.

13. This is the entire warranty between Nokia and the

Consumer, and supersedes all prior and contemporaneous

agreements or understandings, oral or written, and all

communications relating to the Product, and no representation,

promise or condition not contained herein shall modify these

terms.

14. This limited warranty allocates the risk of failure of the

Product between the Consumer and Nokia. The allocation is

recognized by the Consumer and is reflected in the purchase

price of the Product.

15. Any action or lawsuit for breach of warranty must be

commenced within eighteen (18) months following delivery of

the Product.

16. Questions concerning this limited warranty may be directed

to:

Nokia Customer Care Center

Nokia Inc.

7725 Woodland Center Boulevard, Suite #150

Tampa, FL 33614

Telephone: 1-888-NOKIA2U (1-888-665-4228)

Facsimile: (813) 249-9619

TTY Users: 1-800-24NOKIA (1-800-246-6542)

17. The limited warranty period for Nokia supplied attachments

and accessories is specifically defined within their own warranty

cards and packaging.

call timers 17, 24

clearing 30

11. Index

current call timer 32

life timer 41

call waiting 24

caller groups 25

graphics 26

renaming 26

ringing tones 26

caller ID 27

send own number 62

calling cards

making calls with 29

storing in phone 27

calls

ABC mode 16, 35

access codes 16

accessories

batteries 75

chargers 77

alarm clock 16

answering a call 9

antenna 7

automatic answer 17

automatic redial 18

answering 9

answeringautomatically

answering with call

waiting 24

conference calls 31

ending 9

batteries

attaching 3

charging 4

charging times 76

discharging 5

removing 3

standby times 76

talk times 76

forwarding 21

making 8

muting 44

silencing incoming 9

swapping 24

calculator 18

currency converter 19

calendar 19

call forwarding 21

call log 22

clear call lists 29

dialed calls list 32

missed calls list 45

options in call lists 23

received calls list 55

call restrictions see restrict

calls

unmuting 44

care and maintenance 85

chargers 77

charging times 76

clock

displaying/hiding 31

setting 30

time format 31

conference calls 31

currency converter 19

customer care 32

dialed calls list 32

Dice game 39

language 41

last number redial 41

letters, entering 35

life timer 41

digital/analog selection 33

lights

and Keyguard 10

in Car profile 42

lock code 42

locking the keypad see

Keyguard

earpiece volume 33

emergency calls 34, 8 3

emergency key 9 feature 34

ending a call 9

entering letters and

numbers 35

locking your phone 52

Logic game 38

factory settings, restoring 56

forwarding calls see call

forwarding

making a call 8

Memory game 38

memory status 43

help 13

games 38

shortcuts, summary 14

shortcuts, using 13

message alert tone 44

message settings 66

microphone, muting/

unmuting 44

help 13

Inbox 39, 6 5

missed calls list 45

muting calls 44

in-call menu 39

Keyguard 10

keypad cover setting 40

keypad tones 40

keys

NAM selection 45

names, storing see phone

book

network feature setting 46

network services 47

numbers, entering 35

numbers, storing see

phone book

locking 10

power key 7

scroll key 11

softkeys 11

on/off 7

safety information 81

Saved 65

one-touch dialing 47

scroll bar 11

scroll key 11

scrolling 12

paging see text messages

phone book 49

scrolling view 61

security code 61

send own number 62

signal strength 7

Snake game 38

softkeys 11

special characters in

names 37

special characters in

numbers 37

available memory 43

editing entries 50

erasing entries 51

finding entries 51

one-touch dialing

scrolling view 61

storing entries 50

phone lock 52

unlocked phone

number 70

speed dialing see one-

touch dialing

power key 7

standby times 76

start screen 12

system selection 63

private systems see

system selection

profiles 53

pubic system selection 54

public systems see system

selection

talk times 76

technical information 86

text messages 64

forwarding 67

Inbox 39, 65

received calls list 55

redial 41

message settings 66

reading 66

receiving 66

replying to 67

sending 65

automatic 18

residential systems see

system selection

restore factory settings 56

restrict calls 56

storage 68

writing 65

ringing options 58

vibrating alert 70

ringing tones 59

ringing volume 59

roaming 60

tones

keypad tones 40

vibrating alert 70

voice mailbox number,

storing 71

message alert tone 44

ringing options 58

ringing tones 59

ringing volume 59

vibrating alert 70

warning and game 73

touch tones 68

voice messages 71

voice privacy 72

volume

earpiece 33

keypad tones 40

ringing 59

length 70

manual 43

troubleshooting 80

warning and game tones

warranty 87

unlocked phone number 70

unlocking your phone

Keyguard feature 10

phone lock feature 52

unmuting calls 44

welcome note 73

Para obtener un manual del usuario en español favor de

llamar o enviar un fax al teléfono 1-888-NOKIA2U

(1-888-665-4228), fax 1-813-249-9619.

Sony XDCAM PDW 1500 User Manual
Sony ISF C115 User Manual
Sony Ericsson CYBER SHOT C510 User Manual
Seagate ST480HM000 User Manual
Seagate Savvio ST973401SS User Manual
Seagate MOMENTUS ST9640423AS User Manual
Salton FSU122 User Manual
Qualcomm Computer Accessories 43 User Manual
Philips AK 640 User Manual
Packard Bell Grafite & Carbon CS036A00 User Manual