Nokia 6160i User Manual

OWNER S  
MANUAL  
Keys  
Power key  
Press and hold to turn your phone  
on or off.  
Fixed  
antenna  
Do not  
attempt to  
extend or  
remove!  
Soft keys  
Their current  
function is  
Scroll  
keys  
Scroll  
through  
menus,  
submenus,  
and the  
displayed  
above the key  
(for example,  
here their  
functions are  
“Menu” and  
“Names”).  
Menu  
Names  
phone  
book. Press  
and hold for  
continuous  
scrolling.  
ô
Push this key  
to end a  
phone call.  
ó
Dials the  
number on  
the display.  
Indicators and Icons  
You have an active call.  
The phone is waiting for you to enter a response.  
All tones for the current profile have been set to Silent.  
Keyguard has been activated to help prevent any  
accidental keypresses.  
You have one or more voice messages waiting.  
You have one or more unread text messages waiting.  
Digital service is available.  
Any characters you enter will be upper-case letters or  
numbers. Press the # key to switch letter case.  
Any characters you enter will be lower-case letters or  
numbers. Press the # key to switch letter case.  
This appears when you press and hold the # key when  
storing names. Letters can not be entered when this  
appears, allowing quicker access to numbers.  
You are in “special character” mode; select a special  
character and press Insert. (When entering letters, you  
can switch to this mode by pressing the key.)  
The alarm clock is set.  
You have a reminder in your calendar to do something  
(appears only on Calendar display).  
You have a reminder in your calendar that its some-  
ones birthday (appears only on Calendar display).  
You have a reminder in your calendar to call someone  
(appears only on Calendar display).  
You have a reminder in your calendar of a meeting  
(appears only on Calendar display).  
Table of Contents  
1. Safety At A Glance . . . . . . . . . . . . . . . 1  
2. Getting Connected. . . . . . . . . . . . . . . 3  
Attaching your battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Removing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Charging your new battery . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
When is a good time to charge? . . . . . . . . . . . . . . . . . . . . . .4  
Important Battery Information . . . . . . . . . . . . . . . . . . . . . . . . . .6  
3. The Basics . . . . . . . . . . . . . . . . . . . . . 7  
Switching the phone on and off. . . . . . . . . . . . . . . . . . . . . . . . .7  
Get a good signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Want to stop your phone from ringing  
without answering the call?. . . . . . . . . . . . . . . . . . . . . . . . . .9  
Keyguard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
4. Using Your Phone. . . . . . . . . . . . . . . .11  
The display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
What is the ‘start screen’? . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Scrolling through the main menu . . . . . . . . . . . . . . . . . . . . . .12  
Help text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Summary of menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
5. Features A to Z . . . . . . . . . . . . . . . . 16  
Access codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
All calls timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Automatic answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Automatic redial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Storing exchange rate. . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Converting currency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Call forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Call log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
i
Call restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Call settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Call timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Caller groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Caller ID. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Calling card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Making calling card calls. . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Clear call lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Clear timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Setting the clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Selecting time format . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Displaying or hiding the clock . . . . . . . . . . . . . . . . . . . . . . 32  
Conference call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Current call timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Customer care contact number . . . . . . . . . . . . . . . . . . . . . . . 33  
Dialed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Earpiece volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Emergency calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Emergency key 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Entering letters and numbers . . . . . . . . . . . . . . . . . . . . . . . . 35  
ABC mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Changing letter case. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
123 mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Games. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
In-call menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Keypad tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Last call timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Last number redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Life timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Listen to voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Lock code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Changing your lock code. . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Manual touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Memory status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Message alert tone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
ii  
Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44  
Missed calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45  
NAM selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45  
Network feature setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46  
Storing codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46  
Network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47  
One-touch dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47  
Outbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49  
Paging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49  
Phone book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49  
Storing a name and number . . . . . . . . . . . . . . . . . . . . . . . .50  
Recalling names & numbers . . . . . . . . . . . . . . . . . . . . . . . .50  
Erasing stored names and numbers. . . . . . . . . . . . . . . . . . .51  
Phone lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51  
Phone settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52  
Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53  
Customizing Profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53  
Received calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54  
Restore factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54  
Restrict calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55  
Ringing options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57  
Ringing tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58  
Ringing volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58  
Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59  
Scrolling view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60  
Security settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60  
Security code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60  
Changing your security code . . . . . . . . . . . . . . . . . . . . . . . .61  
Send own number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61  
Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62  
Storing a name & number. . . . . . . . . . . . . . . . . . . . . . . . . . . .62  
Quick save. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62  
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63  
Text messages and pages. . . . . . . . . . . . . . . . . . . . . . . . . . . .63  
Writing text messages . . . . . . . . . . . . . . . . . . . . . . . . . . . .64  
Sending text messages. . . . . . . . . . . . . . . . . . . . . . . . . . . .64  
Receiving text messages. . . . . . . . . . . . . . . . . . . . . . . . . . .65  
Reading text messages. . . . . . . . . . . . . . . . . . . . . . . . . . . .66  
Reading options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66  
Forwarding a message . . . . . . . . . . . . . . . . . . . . . . . . . . . .66  
iii  
Replying to a message . . . . . . . . . . . . . . . . . . . . . . . . . . . 67  
Receiving a page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67  
Touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67  
Touch tone length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69  
Unlocked phone number . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69  
Vibrating alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69  
Voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70  
Setting up your voice mailbox number . . . . . . . . . . . . . . . . 70  
Greetings, passwords, and prompts. . . . . . . . . . . . . . . . . . 71  
Listening to your voice messages . . . . . . . . . . . . . . . . . . . 71  
Voice privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71  
Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71  
Warning and game tones . . . . . . . . . . . . . . . . . . . . . . . . . . . 72  
Welcome note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72  
Write new . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72  
6. Accessories. . . . . . . . . . . . . . . . . . . 73  
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73  
Chargers & other accessories . . . . . . . . . . . . . . . . . . . . . . . . 75  
7. Troubleshooting. . . . . . . . . . . . . . . . 78  
8. Reference Information . . . . . . . . . . 79  
9. Technical Data . . . . . . . . . . . . . . . . . 85  
10. NOKIA One-Year Limited Warranty . . 86  
11. Index . . . . . . . . . . . . . . . . . . . . . . . . 90  
iv  
1. Safety At A Glance  
Read these simple guidelines before using your  
phone. Failure to comply with these guidelines may  
be dangerous or illegal.  
For more detailed safety information, see  
Road Safety Comes First  
Don’t use a hand-held phone while driving; park the  
vehicle first.  
Switch Off In Hospitals  
Switch off your phone when near medical equip-  
ment. Follow any regulations or rules in force.  
Switch Off On Aircraft  
Mobile phones can cause interference. Using them  
on aircraft is illegal.  
Switch Off When Refueling  
Do not use the phone at a refueling point. Do not  
use near fuels or chemicals.  
Switch Off Near Blasting  
Do not use the phone where blasting is in progress.  
Observe restrictions, and follow any regulations or  
rules in force.  
Interference  
All mobile phones may get interference which could  
affect performance.  
Use Sensibly  
Use only in the normal position (to ear). Avoid un-  
necessary contact with the antenna when phone is  
on.  
Qualified Service  
Only qualified service personnel may install or repair  
cellular phone equipment.  
Accessories and Batteries  
Use only approved accessories and batteries.  
Do not connect incompatible products.  
1
 
FCC/Industry Canada Notice  
Your phone may cause TV or radio interference (e.g. when using  
a telephone in close proximity to receiving equipment).  
The FCC/Industry Canada can require you to stop using your  
telephone if such interference can not be eliminated. If you  
require assistance, contact your local service facility.  
This device complies with part 15 of the FCC rules. Operation is  
subject to the condition that this device does not cause harmful  
interference.  
Using this Guide  
The wireless phone described in this guide is approved for use  
in TDMA/AMPS networks.  
A number of features included in this guide are called Network  
Services. They are special services provided by wireless service  
providers. Before you can take advantage of any of these  
Network Services, you must subscribe to the service(s) from  
your home service provider and obtain instructions for their use.  
Updates  
The latest version of this Owners Manual may be found on  
Nokias World Wide Web site at www.NokiaUSA.com.  
Interactive manual  
Now, Nokia has a great new way for you to learn how to use  
all of your phone features. Go to www.NokiaHowTo.com to  
access the Nokia Interactive Owners Manual. It provides an  
interactive way to get step-by-step instructions for any of your  
phones features.  
Disclaimer  
Its possible that you may not be able to activate your phone on  
all wireless systems. Please see your service provider for details.  
2
2. Getting Connected  
You’re battery should be charged before you activate  
your new phone. This section will help familiarize you on  
how, and when, to charge your battery.  
Attaching your battery  
Simply place the battery in the grooves on the back of  
your phone. Then slide the battery upward until it clicks.  
Note: Use only those batteries approved by the phone  
manufacturer and recharge your battery only with the chargers  
approved by the manufacturer.  
Removing the battery  
Note: Switch off the phone before removing the battery!  
1. Press and hold the  
button at the top of  
the battery.  
2. Slide the battery  
toward the bottom of  
the phone.  
3. Lift the battery off  
the phone.  
3
Charging your new battery  
Your phone can be used with either a rechargeable  
Li-Ion or NiMH battery. Note that a new battery’s full  
performance is achieved only after two or three  
complete charge and discharge cycles.  
With your phone on or off, connect the charger to a  
standard 120V AC outlet. Then connect the lead from  
the charger to the bottom of your phone or place it on  
a charging stand.  
When the battery begins charging, your phone will beep  
once and the battery strength indicator on the right side  
of the display will scroll.  
Note: If the battery is totally empty, it may take a few minutes  
before the charging indication appears on the display.  
If your phone displays Not charging, charging is  
suspended. Check that the battery is not connected to  
a non-approved charging device. If the battery is very  
hot or cold, wait for a while; charging will automatically  
resume after the battery is restored to its normal  
operating state. If charging still fails, contact your dealer.  
When is a good time to charge?  
You can charge your battery anytime. If you have a  
NiMH battery, you should allow it to completely  
discharge once in a while.  
When your phone beeps once and displays Battery low,  
you only have a couple of minutes of talk time remaining.  
The repetition rate of these battery-low warnings depend  
on the remaining battery capacity and the battery con-  
dition. These warnings are more frequent when you’re  
in a call.  
Note: The phone will not give you the warning tone under  
certain conditions. See “Warning and game tones” on page 72.  
Once all the power has drained from your battery, you’ll  
hear three beeps with the message Recharge battery on  
your display. At this point, your phone will switch itself  
off and you’ll need to recharge your battery.  
4
When is charging complete?  
When the charge indicators stop scrolling, your  
phone is considered fully charged. However, a  
slight increase in charge may occur if your  
phone is left connected to the charger for a  
while. This is called “trickle charge.”  
Charging times depend on the type of battery and  
charger used.  
For approximate charging and operating times, see “Standby  
Can you make calls while charging?  
Yes, you can. But your battery may not charge while a  
call is in progress. Charging should resume once you  
end the call.  
Discharging NiMH batteries  
A NiMH battery lasts longer and performs better if you  
fully discharge it from time to time. To discharge the  
battery, leave your phone switched on until the battery  
is drained. The phone will display several messages that  
the battery is low and that you need to recharge it; just  
ignore them. Do not attempt to discharge the battery by  
any other means.  
5
Important Battery Information  
The battery can be charged and discharged hundreds of  
times but it will eventually wear out. When the operating  
time (talk time and standby time) is noticeably shorter than  
normal, it is time to buy a new battery.  
Use only batteries approved by the phone manufacturer  
and recharge your battery only with the chargers approved  
by the manufacturer. When a charger is not in use, discon-  
nect it from the power source. Do not leave the battery  
connected to a charger for longer than a week, since  
overcharging may shorten its life. If left unused a fully  
charged battery will discharge itself over time.  
(NiMH batteries only) For good operation times, discharge  
the battery from time to time by leaving your phone  
switched on until it turns itself off (or by using the battery  
discharge facility of any approved accessory available for  
your phone). Do not attempt to discharge the battery by  
any other means.  
Temperature extremes will affect the ability of your battery  
to charge: allow it to cool down or warm up first.  
Use the battery only for its intended purpose.  
Never use any charger or battery which is damaged or  
worn out.  
Do not short circuit the battery. Accidental short circuiting  
can occur when a metallic object (coin, clip, or pen)  
causes direct connection of the + and - terminals of the  
battery (metal strips on the back of the battery), for  
example when you carry a spare battery in your pocket or  
purse. Short circuiting the terminals may damage the  
battery or the connecting object.  
Leaving the battery in hot or cold places, such as in a  
closed car in summer or winter conditions, will reduce the  
capacity and lifetime of the battery. Always try to keep the  
battery between 59º F and 77º F (15º C and 25º C). A  
phone with a hot or cold battery may temporarily not work,  
even when the battery is fully charged. NiMH batteries’  
performance is particularly limited in temperatures below  
14º F (-10º C). Li-Ion batteries’ performance is particularly  
limited in temperatures below 32º F (0º C).  
Do not dispose of batteries in a fire!  
Dispose of used batteries in accordance with any local  
regulations.  
6
 
3. The Basics  
You have purchased a powerful phone, with lots of  
features. Read this section for some very basic  
information on how to use your phone.  
A more comprehensive description of your phone is  
covered in “Features A to Z” starting on page 16.  
Switching the phone on and off  
Press and hold the key for two seconds to switch the  
phone on or off.  
Switching off with the  
key  
Quickly press the  
key (Switch off! will appear,  
highlighted) then press OK.  
Note: Thismethod is available in all profiles exceptHeadsetand  
Car.  
NORMAL POSITION: Hold the phone as you would any other  
telephone with the antenna pointed up and over your shoulder.  
TIPS ON EFFICIENT OPERATION: As with any other radio  
transmitting device, do not touch the antenna unnecessarily  
when the phone is switched on. Contact with the antenna  
affects call quality and may cause the phone to operate at a  
higher power level than otherwise needed.  
WARNING! Do not switch on the phone when wireless phone  
use is prohibited or when it may cause interference or danger.  
See “Safety At A Glance” on page 1 for more information.  
Get a good signal  
Your phone operates on radio waves, and the quality of  
radio reception depends entirely on the strength of the  
radio signal in your area.  
This radio coverage is maintained by a wireless network  
and the quality of calls on a wireless phone depends on  
the strength of the wireless radio signal.  
7
 
Checking signal strength  
When you are at the start screen (see page 12)  
or in a call, the signal strength is indicated by  
the indicators on the left side of your phone’s  
display. These indicators scroll as the strength  
of the signal increases and decreases.  
Increasing your phone’s signal may be easy. Try moving  
your phone slightly, or move towards a window if you’re  
calling from inside a building.  
Making a call  
Enter the area code and phone number and press  
ó
Editing a number on display  
Press V to move the cursor to the left and W to move it  
to the right. Press Clear to delete the character to the  
left of the cursor.  
Dialing stored phone numbers  
from the start screen (see page 12), then press  
View stored names and numbers by pressing Wóor V  
See “Phone book” on page 49 for details on storing numbers.  
Calling card calls  
Emergency calls  
See “Emergency calls” on page 34.  
Ending a call  
Press  
ô
Answering a call  
Press any key except  
ô
or  
Note: If Keyguard is on (see next  
paragraph), only answers calls.  
ó
8
Want to stop your phone from ringing without  
answering the call?  
Press  
ô
when the phone rings. This keeps you from  
answering a call if it's inconvenient to talk.  
You can still answer the call if Call or the name of the  
person who is calling is still flashing on your display.  
If you don't wish to answer the call, it will be forwarded  
to your voice mailbox if you have a voice mail  
subscription.  
See “Voice messages” on page 70 for details on your voice  
mailbox.  
Keyguard  
This feature helps to prevent accidental key presses  
(e.g. when your phone is in your pocket, in your purse)  
by locking your keypad.  
If any keys are pressed while  
Keyguard is activated, Press Unlock  
and then * will display.  
Activating Keyguard  
There are three different ways to activate Keyguard.  
Keys locked will appear on the display when activated.  
Press and hold  
ô
Press Menu ∗  
Press Menu 9 at the start screen  
Deactivating Keyguard  
There are two different ways to deactivate Keyguard.  
Press Unlock, then ∗  
Press and hold  
ô
until Unlock keys? appears, then  
press OK  
Note: When Keyguard is ON, calls to the emergency number  
programmed into your phone (e.g. by pressing 911 then  
may be possible. However, Emergency key 9 doesn’t work.  
ó
)
9
 
Answering a call with Keyguard active  
Press to answer the call. After you end the call,  
ó
Keyguard automatically becomes active again.  
Some notes about Keyguard  
Calls may be possible to the emergency number  
programmed into your phone (e.g. 911 or other official  
emergency number). The number is displayed only after  
you have keyed in its last digit.  
Pressing the  
key quickly turns lights on for 15 seconds.  
Keyguard is automatically turned off when the phone is  
connected to a car kit.  
10  
4. Using Your Phone  
The first few days you have your phone, play with it to  
learn how the menu and submenu system works.  
The more you learn how to access these menus and  
submenus, the more fun you’ll have with your phone.  
This section describes the different methods of using  
your phone menus and submenus.  
The display  
Soft keys  
Your phone has two soft keys  
located below the display. The  
current function is indicated by  
the texts appearing directly above  
them. Press the corresponding key  
under the choice you wish to select.  
This illustration shows the phone at the start screen  
screen always displays Menu on the left and Names on  
the right. Menu allows you to access your phone’s  
menus and submenus. Names allows you to access  
your phone book (see “Phone book” on page 49).  
Scroll key  
Your phone has a scroll key located just below the  
display screen. The scroll key has two arrows on it that  
look like V and W. Press these to navigate through your  
phone’s menus and submenus, as well as through your  
phone book. (See “Phone book” on page 49).  
Scroll bar  
When you access your phone’s menu and sub-  
menus, you will notice a scroll bar at the far right  
of the screen. This bar indicates your location in  
the menu structure; each “tab” on the bar  
represents a different menu item.  
11  
For example, press Menu once. The scroll bar appears  
with the first (top) tab displayed. A different tab appears  
each time you press the W or V key to move up and  
down through the menu structure. The scroll bar works  
the same way with submenus.  
Menu & submenu numbering  
When you scroll to a menu or submenu, the menu  
number and/or submenu number appears on the  
display above the scroll bar.  
For example, when you scroll to menu 2 (Call log) the  
number 2 appears in the top right-hand corner of the  
display. If you scroll to menu 4 (Settings), submenu 3  
(Security settings), your phone will display 4-3 in the top  
right-hand corner.  
phone’s features along with their menu locations.  
What is the ‘start screen’?  
The start screen appears when you first turn your phone  
on, in its idle state.  
When you want to get to the start screen, press  
any time except during a call (unless you want to hang  
up).  
ô
at  
Note: If you press  
(i.e., a setting, phone number, name, etc.), the phone displays  
the start screen and the input is not saved.  
ô
when the phone is requesting input  
Scrolling through the main menu  
Press Menu at the start screen. Then press W or V to  
reach the desired menu item.  
Press Select, Options or OK (whichever appears) to  
enter submenus and to choose options.  
Press Exit to exit the present menu or Back to go back  
one level.  
12  
   
Using shortcuts  
This is a quick and easy way to access a menu without  
having to scroll through other menus.  
Press Menu, then menu number, then submenu  
number.  
Press the menu and submenu numbers within a couple  
of seconds of each other when using this method.  
For a summary of your phone’s menu structure, see “Summary  
Help text  
If you’re not sure how a feature works, wait just a few  
seconds and help text will appear for most of your  
phone’s features. Press More to see the next page of  
the text or Back to exit.  
13  
 
Summary of menu items  
1 Messages  
1 1 Text Messages  
1 1 1 Inbox  
1 1 2 Write new  
1 1 3 Outbox  
1 1 4 Saved  
1 1 5 Erase all  
1 2 Voice Messages  
1 2 1 Listen to voice messages  
1 2 2 Voice mailbox number  
1 3 Welcome Note  
2 Call log  
2 1 Missed calls  
2 2 Dialed calls  
2 3 Received calls  
2 4 Clear call lists  
2 5 Call timers  
3 Profiles  
3 1 Normal (following submenus appear in all profiles)  
3 1 1 Select  
3 1 2 Customize  
3 1 2 1 Ringing options  
3 1 2 2 Ringing volume  
3 1 2 3 Ringing tone  
3 1 2 4 Vibrating alert (w/vibrating battery only)  
3 1 2 5 Keypad tones  
3 1 2 6 Warning and game tones  
3 1 2 7 Message alert tone  
3 2 Silent  
3 3 Meeting  
3 4 Outdoor  
3 5 Pager  
3 6 Car (once used with car kit)  
3 7 Headset (once used with headset)  
14  
 
4 Settings  
4 1 Call settings  
4 1 1 Emergency key 9  
4 1 2 Automatic redial  
4 1 3 Calling card  
4 2 Phone settings  
4 2 1 Clock  
4 2 2 Alarm clock  
4 2 3 Touch tones  
4 2 4 Restore factory settings  
4 2 5 Language  
4 3 Security settings  
4 3 1 Restrict calls  
4 3 2 Access codes  
4 4 Network services  
4 4 1 Voice privacy  
4 4 2 Call forwarding  
4 4 3 Call waiting  
4 4 4 Send own number  
4 4 5 Network feature setting  
4 4 6 NAM selection  
5 System  
5 1 Automatic  
5 2 Manual  
5 3 New search  
6 Games  
6 1 Memory  
6 2 Snake  
6 3 Logic  
6 4 Dice  
7 Calculator  
8 Calendar  
9 Keyguard  
15  
5. Features A to Z  
ABC mode  
This allows you to enter names into your phone book.  
Access codes  
This is a security feature that allows you access to  
certain phone features, such as the phone lock (page 51)  
and unlocked phone number (page 69).  
Alarm clock  
The alarm clock operates off your  
phone’s clock. The volume for the  
alarm clock is determined by the  
current ringing volume.  
Note: If you have selected the Silentor Beep once ringing option  
(see page 57), your alarm clock will quietly beep one time.  
See “Clock” on page 31 for information on your phone’s clock.  
Setting the alarm clock  
1. Press Menu 4 2 2 (Settings - Phone settings - Alarm  
clock)  
2. Enter time you wish to set alarm (use two-digit  
fields for hours and minutes). Existing digits will  
be replaced with the new alarm time.  
3. Press OK  
4. Select either am or pm and press OK  
Note: Step 4 appears only if you have selected am/pm format;  
When the alarm goes off  
Press Stop to shut off the alarm.  
16  
       
Snoozing  
Press Snooze.  
The alarm will go off again in 10 minutes. If you let the  
phone alarm for 1 minute without pressing a key, it  
stops alarming for 10 minutes then starts again.  
Turning the alarm clock off  
Press Menu 4 2 2 (Settings - Phone settings - Alarm  
clock), then scroll to Off and press OK.  
Note: If you have selected the Silent or Meeting profile, your  
alarm will only beep once. The best profile to use while using the  
alarm clock is Normal or Outdoor, unless these have been  
modified from their original settings.  
For more information on Profiles, see page 53.  
All calls timer  
This feature keeps track of how much time you have  
spent on all calls with your phone.  
Automatic answer  
This is one of the settings in your phone’s Profiles  
(see page 53). With this on, your phone answers  
incoming voice calls after one ring.  
Note: This can only be used when your phone is connected to  
a headset or to an approved handsfree car kit equipped with the  
ignition sense option, with the ignition on.  
Activating automatic answer  
1. Press Menu 3 (Profiles)  
2. Your phone lists each profile. Use W to highlight  
either the Car or Headset profile and press Options.  
Note: Car and Headset will not appear unless your phone has  
already been connected to a car kit or headset at least one time.  
3. Highlight Customize and press OK. Press W to  
Automatic answer, then press Select again.  
4. Press W to On and press OK.  
17  
Automatic redial  
Your phone will redial the number you’re trying to call up  
to 3 times after you hear a quick, busy signal. Press  
ô
to stop the call attempts.  
This feature attempts to redial numbers that are busy  
due to the wireless network. It will not redial numbers to  
a busy party.  
Activating automatic redial  
Press Menu 4 1 2 (Settings - Call settings - Automatic  
redial), then press W or V to On and press OK.  
Calculator  
Your phone’s calculator adds,  
subtracts, multiplies, divides, and  
converts currency.  
Remember! Your phone must be switched  
on to use this feature. Do not switch on the  
phone when wireless phone use is prohibited or when it may  
cause interference or danger.  
Using the calculator  
1. Press Menu 7 (Calculator)  
2. Enter the first number in the calculation (press # for  
decimals)  
3. To add, press (+ appears)  
To subtract, press ∗∗ twice (- appears)  
To multiply, press ∗∗∗ (* appears)  
To divide, press ∗∗∗∗ ( / appears)  
To add a decimal, press the # key  
4. Enter the second number  
Repeat these steps as many times as needed. Press  
Clear to erase any mistakes.  
5. Press Options. With Equals highlighted, press OK  
Note: You can also choose Add, Subtract, Multiply, and  
Divide from the list of options.  
18  
 
Storing exchange rate  
1. Press Menu 7, then press Options  
2. Scroll to Exchange rate and press OK  
3. Press W or V at either How many home units to a  
visited unit or How many visited units to a home  
unit, depending on how you wish to convert the  
currency. Press OK once you decide.  
4. Enter the appropriate exchange rate and press OK  
(use the # key for decimals)  
5. Phone will display Rate saved  
Converting currency  
1. Press Menu 7  
2. Enter number of units, then press Options  
3. Press W or V to either To home or To visited, and  
press OK  
4. Converted currency will display  
Calendar  
The calendar keeps track of birth-  
days, meetings, simple reminders,  
and calls you need to make. It can  
even sound an alarm when it’s time  
for you to make a call or go to a  
meeting.  
Remember! Your phone must be switched on to use this  
feature. Do not switch on the phone when wireless phone use  
is prohibited or when it may cause interference or danger.  
Note: Your phone must remain on to use the calendar’s alarm  
feature. If your phone is off, the alarm will not sound at its  
scheduled time.  
19  
Using the calendar  
1. Press Menu 8 (Calendar)  
2. If you haven’t set the time and date, your phone  
prompts you to set your phones clock  
When your phone prompts you for the time with  
hh:mm, enter the time in hours and minutes  
(using two-digit fields), then press OK  
Time format (24-hour or am/pm) is set using the Clock.  
When your phone prompts you for the date with  
mm/dd/yyyy, enter the month and day (using two-  
digit fields) and year (using a four-digit field), then  
press OK.  
Tip: Use W to move the cursor right and V to move it  
left. When you enter a digit, it writes over the number to  
the right of the cursor.  
3. Your phone displays the current day. You can also  
scroll to different days by pressing W or V.  
4. Once you’re at the date you want, press Options.  
Then use to highlight the option you want, and  
press Select. The options are:  
Option 1: View day  
With this option, you can view the notes of the day  
currently on display.  
Use W to scroll through the notes. Each note allows you  
to choose the following Options:  
Erase clears the note from your calendar.  
Edit gives you the same prompts you got when you  
made the note.  
Move gives you the date prompt so you can move the  
note to another date.  
20  
Option 2: Make note  
With this option, you’ll need to choose Reminder, Call,  
Meeting, or Birthday. Your phone will prompt you for  
more information depending on which one you choose.  
You can also set an alarm for any calendar note.  
entering information at the Subject: prompt.  
Note: When the alarm goes off, you can press Postpone or OK.  
Press OK to shut off the alarm.  
Option 3: Erase notes  
With this option, you’ll need to choose which notes to  
erase. If you choose all the notes for the day currently  
on display (Of Chosen Day), or One By One (for all notes  
in the calendar), your phone presents each note to you  
with the option Erase or Back.  
If you choose All at Once, your phone will delete all  
calendar notes. When prompted to confirm the erase,  
press Yes or No.  
Option 4: View all  
This allows you to view the notes of the entire calendar.  
Use W or V to scroll through the notes. Calendar memory  
empty will appear if there are no notes in the calendar.  
Option 5: Go to date  
Enter the date you wish to go to.  
Option 6: Set the date  
Enter the day and month (using two-digit fields) and  
year (using a four-digit field), then press OK.  
21  
Call forwarding  
This network service is used to forward incoming calls  
to another number so you won’t miss an important call.  
Check with your service provider for details.  
Note: Before you can activate this feature, you should first store  
the feature code given to you by your service provider.  
Otherwise, this feature may not appear in the menu.  
However, you can use the feature code manually, if you choose,  
by including the feature code in front of the phone number  
(e.g., *72 555 1212)  
1. Press Menu 4 4 2 (Settings - Network services - Call  
forwarding)  
2. Scroll to desired call forwarding feature (see options  
below) and press Select  
3. Highlight Activate and press OK  
4. Enter phone number at Number: (or press Search to  
locate number in phone book) and press OK  
5. Your phone will attempt to call the network to  
confirm the feature code you entered in Menu 4 4 5  
6. Once the feature code had been confirmed, the  
feature is activated  
Call forwarding options  
Forward all calls forwards all incoming calls.  
Forward if busy forwards calls only when you’re on the  
phone.  
Forward if not answered forwards calls if you don’t  
answer.  
Forward if out of reach forwards calls if you are out of  
the serving wireless network.  
Cancel all call forwarding cancels all call forwarding  
options you have active.  
22  
 
Call log  
This feature automatically keeps  
track of numbers you’ve dialed,  
numbers that have called you, and  
the amount of time you’ve spent on  
calls.  
Using call log  
1. Press Menu 2 (Call log)  
2. Scroll to one of the following options, then press  
Select or OK  
2-1 Missed calls - See page 45.  
2-2 Dialed calls - See page 33.  
2-3 Received calls - See page 54.  
2-4 Clear call lists - See page 30.  
2-5 Call timers - See page 24.  
Tip: You can dial any of the phone numbers by pressing  
ó
while the number is on the display.  
The ‘Options’ soft key  
When you access Dialed calls, Received calls, or Missed  
calls and press Options, a list of options will appear on  
your phone’s display.  
Call time shows the date and time when the call was  
first connected (if clock has been set)  
Edit number allows you to edit the dialed number.  
Save allows you to save the number into your phone  
book.  
Erase will erase the number from the call list.  
View number will appear only if the number has been  
stored in the phone book and the name is displayed  
instead of the number.  
23  
   
Call restrictions  
This feature allows you to restrict incoming and  
outgoing calls to and from certain numbers.  
Call settings  
This feature allows you to access and activate some of  
your phone’s features.  
Using call settings  
1. Press Menu 4 1 (Settings - Call settings)  
2. Press W to reach one of the following options, then  
press Select  
4-1-1 Emergency key 9 - See page 35.  
4-1-2 Automatic redial - See page 18.  
4-1-3 Calling card - See page 28.  
Call timers  
Your phone automatically keeps  
track of the amount of time you’ve  
spent in calls.  
1. Press Menu 2 5 (Call log - Call  
timers)  
2. Scroll repeatedly to access the following options  
Last call displays call duration of last call.  
All calls displays call duration of all calls made since  
timers have last been reset (see page 30 for details  
on how to clear call timers).  
Life timer shows duration of all calls; this can not be  
reset (see page 41).  
Clear timers clears all call timers except the Life  
timer (see page 30).  
24  
   
These call durations are for the currently-selected NAM  
(phone number). Your phone has separate timers for  
each NAM your phone uses, except for the Life timer.  
See “NAM selection” on page 45 for details on NAM.  
Note: The actual time invoiced for calls by your service provider  
may vary, depending upon items such as network features,  
rounding off for billing, and taxes.  
Call waiting  
If you have subscribed to Call Waiting, your phone will  
beep during a call let you know you have an incoming  
call. Your phone may also display the incoming caller’s  
identification (see “Caller ID” on page 27).  
Answering an incoming call with call waiting  
Press  
ó
Press  
Swappinóg between two calls  
Ending the calls  
Press to end the current call.  
ô
Activating call waiting  
You can also activate this feature with your phone;  
simply ask your service provider for the feature code,  
store it into your phone, then activate it.  
Note: This feature may not appear in your phone’s menu until  
the feature code has been stored.  
1. Press Menu 4 4 3 (Settings - Network services - Call  
waiting)  
2. Scroll to Activate (or select Cancel to cancel and  
press OK  
3. Your phone will attempt to call the network to con-  
firm the feature code you entered in Menu 4 4 5  
25  
 
4. Once the feature code has been confirmed, the  
feature is activated.  
Caller groups  
You can create groups of names in your Phone book  
(see page 49), and give each group a different ringing  
tone. Then you’ll know when someone from that group  
is calling you because of the way the phone rings.  
Adding names to a caller group  
Note: The names and numbers that you add to a group must  
already be stored in your phone book. See “Storing a name and  
1. With the display clear, press W until you see the  
name or number you want, or choose Name and  
then press Search  
2. Press Details, if shown, or skip to Step 3  
3. Press Options  
4. Use W to reach Caller groups. Press Select.  
5. Use W to reach the group to which you want to add  
this name or number. Press Select.  
Defining a ringing tone for a caller group  
1. With the display clear, press Names  
2. Press W to reach Caller groups. Press Select  
3. Use W to reach the group you want. Press Select  
4. Press W until you see Group ringing tone. Press  
Select. Use W to reach the tone you want to hear  
when anyone from this group calls you. Press OK.  
Tip: You can set your phone to ring only when people  
from certain caller groups call you, and to otherwise be  
silent.  
See the “Caller group” description under “Ringing options” on  
26  
     
Renaming a caller group  
2. Press W until you see Rename group. Press Select.  
3. Enter the group name (see “Entering letters and  
numbers” on page 35 for details) and press OK  
Removing names from a caller group  
2. Use W to reach No group. Press Select.  
Caller group graphics  
When someone calls you from a particular caller group,  
your phone can display a graphic to identify which caller  
group that person is calling from.  
1. Press Names, scroll to Caller groups, then press Select  
2. Scroll to the caller group you wish to display the  
graphic for and press Select  
3. Scroll to Group graphic and press Select  
4. Scroll to On to display the graphic that goes with  
that particular caller group  
Caller ID  
Caller ID is a network service that can display the name  
and phone number of the person calling you, if the  
information is available. Contact your service provider  
for details.  
If the caller can be identified, the phone may display the  
caller’s name and phone number. The information  
displayed depends on the information available through  
the network and your phone book. It is possible that  
only the name or the number will appear.  
Call - caller ID unavailable will display when the wireless  
network doesn’t recognize the calling number. Also,  
Call - caller ID blocked may display if the calling party  
has blocked caller ID.  
27  
 
Calling card  
If you wish to use a calling card for  
long distance calls, you must first  
store your calling card information  
into your phone. Your phone can  
store up to four calling cards.  
Storing your calling card  
1. Press Menu 4 1 3 (Settings - Call settings - Calling  
card)  
2. Scroll to desired calling card and press Options  
3. Press W or V to Edit, press OK  
4. Enter security code and press OK  
5. Press Select at Dialing sequence. Select the dialing  
sequence your card uses (use chart below), press  
W or V to choose sequence, then press Select  
Note: The order of the following steps may vary, depending on  
which dialing sequence your card uses.  
6. Enter access number when prompted for the cal-  
ling cards access number (usually the 1-800 num-  
ber listed on the back of the calling card), press OK  
Note: You can also retrieve the access number from your phone  
book if it has already been stored. Simply press Search, then W  
or V to find the number.  
7. Enter card number and/or PIN when prompted to  
enter calling card number and personal identifica-  
tion number, then press OK. Press OK again at Save  
changes?  
8. Press W or V to Card name and press Select. Enter  
card name using your phones keypad, press OK.  
help on entering the card name  
28  
 
For details about your phone’s security code, see “Security  
Cards  
using this  
sequence*  
Dialing  
Sequence  
Use for cards that  
require you to:  
Access no.  
+ phone no.  
+ card no.  
Dial 1-800 access number,  
then phone number, then card Choice, Sprint  
number (+ PIN if required)  
MCI, AT&T True  
Canada, Unitel  
Access no.  
+ card no.  
+ phone no.  
Dial 1-800 access number,  
then card number (+ PIN if  
required), then phone number  
networkMCI,  
WorldPhone MCI  
Prefix  
Dial the prefix (any numbers  
GTE, PacBell,  
+ phone no.  
+ card no.  
that must precede the phone AT&T, Stentor  
number) and phone number  
you want to dial, then card  
number, (then PIN, if required)  
*These calling cards are frequently used with these dialing  
sequences. However, they may vary and are subject to change  
at the phone company’s discretion.  
Choosing a calling card to use  
1. Press Menu 4 1 3 (Settings - Call settings - Calling  
card)  
2. Scroll to desired card and press Options  
3. Press W or V to highlight Select and press OK.  
4. Enter security code at Security code:, press OK  
5. Your phone will display Card ready for use  
Making calling card calls  
1. Enter the phone number, including any prefix (such  
as 0 or 1) that your calling card may require when  
you make a calling card call. See your calling card  
for instructions.  
2. Press and hold  
ó
for a few seconds until your  
phone displays Card call.  
29  
3. Listen for the tone, then press OK. (Your phone will  
display Wait for tone, then press OK)  
4. Listen for the tone again, then press OK. (Your  
phone will display Wait for tone, press OK again.)  
Note: This procedure may not apply to all calling card options  
programmed into your phone. Please look at the back of your  
calling card or contact your long distance company for more  
information.  
Change lock code  
This feature allows you to change your lock code.  
Change security code  
This feature allows you to change your security code.  
Clear call lists  
This feature will clear all dialed numbers, as well as  
numbers of answered calls and missed calls. You can  
not undo this operation, so be careful.  
1. Press Menu 2 4 (Call log - Clear call lists)  
2. Highlight either All, Missed, Dialed, or Received and  
press OK (All will clear all call lists, while the others  
clear their respective call lists)  
Clear timers  
This feature clears all call timers for the currently-selected  
NAM. See “Call timers” on page 24 for more details.  
1. Press Menu 2 5 4 (Call log - Call timers - Clear timers)  
2. Enter security code at Security code: and press OK  
30  
   
Careful: Clearing call timers can not be undone. If you are  
using the call timers to log or track the amount of time you are  
using your phone, you may wish to record the call timers before  
you erase them.  
Note: The Life timer contains important warranty information  
and can not be reset. See “Life timer” on page 41 for details.  
Clock  
Your phone has an internal clock  
that can be displayed or hidden.  
It also features an alarm clock  
(see page 16).  
Note: The clock is powered by your  
phone’s battery. If your clock has been activated and you re-  
move the battery while your phone is still on, you will need to  
reset the time after you turn your phone back on.  
However, if you first turn your phone off before removing the  
battery, your phone will retain the time and date it had before  
the battery was removed.  
Setting the clock  
1. Press Menu 4 2 1 (Settings - Phone settings - Clock)  
2. Scroll to Adjust time and press Select  
3. Enter present time at Time: (use two-digit fields for  
hours and minutes)  
4. Press OK  
5. Select am or pm and press OK (if am/pm format has  
been selected; see below)  
Selecting time format  
1. Press Menu 4 2 1 (Settings - Phone settings - Clock)  
2. Scroll to Time format and press Select  
3. Scroll to either 24-hour or am/pm  
4. Press OK  
31  
   
Displaying or hiding the clock  
1. Press Menu 4 2 1 (Settings - Phone settings - Clock)  
2. Scroll to either Hide clock or Display clock (only one  
will display depending on the current setting)  
3. Press Select  
Conference call  
This feature allows you to add a third party to a call. You  
can use this feature with local and long distance calls.  
Note: This feature may not be available in all wireless systems.  
See your service provider for details and availability.  
Making a conference call  
While in a call, enter (or recall from the óphone book)  
1.  
the second phone number and press  
2. Once the third party answers, press  
ó
to con-  
nect all three parties  
3. Press  
ó
again if you wish to disconnect the third  
to drop both parties.  
party. Press  
ô
Recalling a number from the phone book during  
a conference call  
1. During the call, press Options  
2. Scroll to Names and press OK  
3. Press Select at Search  
4. Enter name and press OK, or just press W or V to  
scroll through the phone book  
5. Press  
ó
Current call timer  
This feature displays the running elapsed time on your  
screen while a call is active. Once the call has ended,  
simply press any key to clear the display.  
32  
 
Activating the current call timer  
Press Menu 2 5 (Call log - Call timers) and press Details.  
With Current call timer displayed, press Select, scroll to  
On, and press OK  
Customer care contact number  
With the press of a single button, you can quickly  
attempt calls to your service provider. This feature can  
be helpful if you’re having difficulties dialing a number,  
especially when traveling outside your home area.  
Simply press and hold the 2 key and your phone will  
attempt to call a customer care operator in the area.  
Note: This may not be available on all systems. Contact your  
service provider for availability.  
Customize profiles  
This feature allows you to customize individual Profiles.  
See “Profiles” on page 53 for details.  
Dialed calls  
Your phone automatically stores the  
last 10 numbers you’ve dialed.  
1. Press Menu 2 2 (Call log - Dialed  
calls)  
2. Press W or V to scroll through dialed numbers list  
3. Press  
ó
to dial the number you wish to call  
You can also access the last 10 dialed numbers if you  
press ó, then quickly press W or V to scroll through  
the list.  
Also, see “Call log” on page 23 for details on other call lists.  
The ‘Options’ soft key  
33  
   
Earpiece volume  
The scroll keys on your phone will adjust the earpiece  
volume during a phone call. The top scroll key increases  
while the bottom one decreases the volume.  
If an accessory like a headset or a car kit, or one with its  
own loudspeaker, is connected to your phone, the  
scroll keys will adjust the volume for that accessory.  
Note: Using the scroll keys to adjust earpiece volume functions  
only during phone calls.  
Emergency calls  
Before attempting any emergency calls, see “Making an Emer-  
gency Call” on page 82 for important safety information.  
1. If the phone is not on, switch it on  
2. Press the  
ô
key to ready the phone for calls.  
(Press it twice if there are still digits on the display.)  
3. Key in the emergency number for your present  
location (e.g. 911 or other official emergency  
number). Emergency numbers vary by location.  
4. Press  
ó
IMPORTANT!  
This phone, like any cellular phone, operates using radio signals,  
cellular and landline networks, as well as user-programmed func-  
tions which can not guarantee connection in all conditions.  
Therefore, you should never rely solely upon any cellular phone  
for essential communications (e.g., medical emergencies).  
Remember, to make or receive any calls, the phone must be  
switched on and in a service area with adequate cellular signal  
strength.  
Emergency calls may not be possible on all cellular phone net-  
works or when certain network services and/or phone features  
are in use. Check with local cellular service providers.  
If certain features are in use (keyguard, restrict calls, etc.), you  
may first need to turn those features off before you can make an  
emergency call. Consult this document and your local cellular  
service provider.  
34  
   
When making an emergency call, remember to give all the nec-  
essary information as accurately as possible. Remember that  
your cellular phone may be the only means of communication  
at the scene of an accident - do not cut off the call until given  
permission to do so.  
Emergency key 9  
emergency call when you press 9, then  
dials the emergency number pre-programmed into your  
phone.  
With this feature on, the phone attempóts to make an  
. The phone  
Note: You can also dial an emergency call by pressing and  
holding 9 until the phone indicates it is attempting to make an  
emergency call. However, this method does not work when  
Keyguard is active or when the phone is connected to a  
modem.  
Activating Emergency key 9  
Press Menu 4 1 1 (Settings - Call settings - Emergency  
key 9), scroll to On to activate or Off to cancel, then  
press OK.  
IMPORTANT!  
Official emergency numbers vary by location (e.g. 911). Only  
one emergency number is programmed into your phone to be  
dialed automatically by Emergency key 9, which may not be the  
proper number in all circumstances.  
Entering letters and numbers  
You can enter letters, as well as numbers, when storing  
information into your phone by using your phone’s  
keypad. When you see the letter you wish to enter,  
simply press the key associated with that letter until it  
appears on the display (numbers also appear).  
ABC mode  
When you need to enter letters into your phone, it will  
automatically switch over to  
mode.  
35  
   
Your phone displays the  
icon to indicate that your  
phone is in ABC mode. It also displays when you are  
viewing names rather than numbers.  
When  
is displayed, you can enter these characters:  
Key Characters Key  
Characters  
PQRS7  
1
2
3
4
5
6
.,’?!-1  
ABC2  
DEF3  
GHI4  
7
8
9
0
*
TUV8  
WXYZ9  
Enters an empty space, 0  
(See next page)  
JKL5  
MNO6  
#
Changes letter case; long  
press toggles between  
ABC/abc and 123 mode  
While you’re editing a name, the V key will move the  
cursor to the left, and W will move it to the right.  
Press Clear to correct any mistakes.  
If you wish to enter an empty space between  
characters, press 0 for each space.  
Changing letter case  
Press the # key to switch between upper and lower  
case letters. The  
icon will switch to  
to  
indicate you are using lower case.  
123 mode  
When storing names to the phone book, you can enter  
a number within a name at any time. Simply press that  
particular number key a few times until it appears.  
However, you can do this more quickly by accessing  
the  
mode, without having to scroll through each  
letter to access the number you wish to enter.  
Simply press the # key for about 2 seconds while in  
mode and the  
icon will appear. While in this  
mode, only numbers can be entered. Letters can not be  
entered unless your phone is in  
36  
mode.  
 
Press the # key again for a couple of seconds if you  
wish to deactivate the mode.  
Special characters (for storing names)  
When in ABC mode (see page 16), you can press the ∗  
key and the following special characters will appear.  
You can use these characters to help when storing  
names in your phone book. Simply press W or V to  
highlight the one you wish to use and press Insert.  
. , ? ! : ; - + # * ( ) ‘ “ _ @ & $ £ % / < > ¿ ¡ § = [ ] ¥  
TIP: If you wish to access a special character that  
appears toward the end of this list, press V for quicker  
access.  
Special Characters (for storing numbers)  
The following special characters are helpful when you  
store names to your phone book (see page 49). Simply  
press the * key once or repeatedly, and the following  
characters can be stored within the number sequence.  
(p) creates a pause when a number is dialed; the  
digits located to the right of the “p” are automati-  
cally sent as touch tones after a 2.5 second pause  
(see page 68).  
(w) creates a “wait” when a number is dialed.  
Send or  
The “wómakes your phone wait for you to press  
, then it sends the digits located to the  
right of the “w” as touch tones (see page 68).  
You can add as many special characters as you need  
in a single number sequence. These characters can not  
be entered while in  
mode.  
Erasing stored names and numbers  
Erasing your entire phone book  
37  
 
Games  
You have four exciting games to choose from in your  
phone. Press Menu 6 to choose one of the following  
games:  
REMEMBER! Your phone must be switched on to use this  
function. Do not switch on the phone when wireless phone use  
is prohibited or when it may cause interference or danger.  
Memory  
Reveal pictures to find pairs in as few tries as possible.  
Move the cursor with the 2 (up), 4 (left), 6 (right), and 8  
(down) keys. Press the 5 key to reveal pictures. Press  
the # key to jump right over revealed pictures or move  
from top left to bottom right. Press the key to jump left  
over revealed pictures or move from bottom right to top  
left. Once found, pairs stay visible.  
Snake  
Feed the snake with as many goodies as possible and  
watch it grow. Use keys 2, 4, 6, and 8 to turn the snake  
toward food. The longer the snake’s tail grows, the  
higher the score. If the snake hits its own tail or the  
surrounding wall, the game is over.  
Logic  
Find a secret combination of figures. Available figures  
are shown at the top of the display before you accept  
the first guess row. Use the 2, 4 and 8 keys to move the  
cursor and the 5 key to select the figure. To copy a  
figure from a previously accepted guess row, start  
scrolling with the 4 key, move the cursor to the desired  
figure in the normal way and accept the selection with  
the 5 key.  
Once you think you have the right combination, press  
the * key. The result is presented as a set of marks over  
the row. A correct figure in the right place gives a full  
mark; a correct figure in the wrong place gives a half  
mark. The game ends when all the figures are correct  
and in the right place.  
38  
Dice  
Use this to play other games that require a set of dice if  
one isn’t available. Use the Level option to set the num-  
ber of dice, up to six. You can roll, lock, and unlock  
each die as many times as you wish.  
When you start a new game, the dice roll for a couple of  
seconds and then stop. Use the 4 (left) and 6 (right) keys  
to select a die. Press the 5 key to lock or unlock the  
selected die.  
Press to roll the unlocked dice again.  
Game options  
When you select a game, you can choose from the  
following submenus:  
Level allows you to choose the level of difficulty.  
New game starts a new game.  
Top score will display the top score (does not appear in  
Logic).  
Instructions will describe how the game is played.  
Note: Last view or Continue may appear in the options list if a  
game is interrupted, not finished, or if you have lost the game.  
Inbox  
When you receive a text message, it’s stored in the  
Inbox. Your phone will display Message received, along  
with the text message icon, and makes a sound  
(depending on the message alert tone; see page 44).  
complete details on this feature.  
In-call menu  
While in a call, you may notice the Options soft key.  
Pressing this will access you to the in-call menu, and  
you may notice the following choices:  
39  
Touch tones You can manually enter a touch tone string  
or search for one in your phone book (see “Phone  
New call You can make a third party conference call  
Menu Allows you access to your phone’s menu  
Names Allows you access to your phone book  
Mute Allows you to mute the microphone; if your micro  
phone is already muted, this will change to End mute  
Keyguard  
This feature helps protect the keypad against accidental  
keypresses.  
the call?” on page 9 for complete details.  
Keypad tones  
This is one of the settings in your phone’s Profiles  
(see page 53). It sets the volume of the tone you hear  
when you press your phone’s keys.  
Note that if you choose the Silent profile, keypad tones  
will be turned off.  
Setting the keypad tones  
1. Press Menu 3 (Profiles)  
2. Your phone lists each profile. Use W to highlight the  
one you want to set the keypad tones for and  
press Options.  
3. Highlight Customize and press OK. Press W to  
Keypad tones and press Select  
4. Press W to scroll through the options; your phone  
plays a sample of each. Press OK for the one you  
want.  
40  
Language  
Because many wireless phone cus-  
tomers speak English as a second  
language, your phone allows you to  
choose your phone’s displayed  
language.  
Choosing a language for your phone  
Press Menu 4 2 5 (Settings - Phone settings - Language),  
scroll to the language you wish to use and press OK.  
You can choose from English, French, Spanish,  
Portuguese or Traditional Chinese.  
Last call timer  
This feature displays the duration of your last call.  
Last number redial  
When you want to call your last dialed number,  
Press  
ó
and wait 3 seconds  
Note: You must be at the start screen before you press  
ó
Letter case  
You can change from upper to lower case when  
entering letters into your phone.  
See “Changing letter case” on page 36 for complete details.  
Life timer  
The life timer displays the total time of all calls dialed and  
received with your phone (in hours and minutes only).  
The life timer can not be reset and is used in conjunction  
with your phone’s warranty  
41  
   
Lights  
This is one of the settings in your phone’s Car Profile  
(see page 53). This feature determines whether the  
lights are on only when you use your phone, or if they  
are on at all times. This setting works only when your  
phone is connected to a car kit.  
1. Press Menu 3 (Profiles)  
2. Your phone lists each profile. Use W to highlight Car  
and press Options.  
Note: Car will not appear in the list until the phone has been  
connected to a car kit at least once.  
3. Highlight Customize and press OK. Press W to  
highlight Lights and press Select.  
4. Use W to scroll through your choices and press OK  
If you select Automatic, your phone’s lights are turned  
off within fifteen seconds if no keys are pressed. If On is  
selected, then the lights will remain on the entire time  
your phone is connected to the car kit.  
Listen to voice messages  
This feature allows you to access your voice messages.  
See “Voice messages” on page 70 for complete details.  
Lock code  
You’ll need the lock code to activate and deactivate  
Phone Lock (see page 51), or to change your lock  
code. The default lock code is 1234. If you enter an  
incorrect lock code five times in a row, your phone will  
prompt you for the security code (see page 60).  
Changing your lock code  
In a lock code, only numeric characters are accepted.  
1. Enter Menu 4 3 2 3 (Settings - Security settings -  
Access codes - Change lock code)  
2. Enter lock code at Enter lock code: and press OK  
42  
   
3. Enter new lock code, press OK  
4. Verify new lock code, press OK  
Note: When you change your lock code, make sure you store it  
in a safe place, away from your phone. Avoid entering access  
codes similar to emergency numbers to prevent accidental  
emergency calls.  
Manual touch tones  
This setting determines how long touch tones are  
produced as you press the keys on the keypad.  
Note that touch tones are sometimes called DTMF  
tones.  
Setting manual touch tones  
Press Menu 4 2 3 1 (Settings - Phone settings - Touch  
tones - Manual touch tones) and highlight one of the  
following options, then press OK.  
Continuous means the tone sounds for as long as  
you press and hold the key.  
Fixed sets the tone length to .1 second, regardless  
of how long you press the key.  
Off turns the tones off, and no tones will be sent  
when you press the keys.  
Memory status  
This feature allows you to see how many free and in-use  
memory locations are in your directory.  
Press Names, scroll to Options and press Select.  
Then scroll to Memory status and press Select again  
Messages  
This feature allows you to access your voice and text  
messages, as well as composing your own welcome  
note.  
43  
Using messages  
1. Press Menu 1 (Messages)  
2. Scroll to one of the following options, then press  
Select  
1-1 Text messages - See page 63.  
1-2 Voice messages - See page 70.  
1-3 Welcome note - See page 72.  
Message alert tone  
This is one of the settings in your phone’s Profiles  
(see page 53). It sets the tone that your phone makes  
when you get a text message.  
1. Press Menu 3 (Profiles)  
2. Your phone lists each profile. Use W to highlight the  
one you want to set the message alert tone for and  
press Options.  
3. Highlight Customize and press OK. Press W to  
highlight Message alert tone, then press Select.  
4. Use W to scroll through your choices (your phone  
plays samples) and press OK.  
Microphone  
You can mute and unmute your phone’s microphone  
while a call is in progress. During a call, your phone’s  
soft keys change from Names and Menu to Options and  
Mute.  
Muting and unmuting your phone  
You can mute the phone’s microphone during a call;  
simply press Mute. To unmute the microphone, press  
Unmute.  
If these texts are not available, press Options, scroll to  
Mute or End mute and press Select.  
Muting and unmuting also affect the microphones of  
any accessories connected to the phone.  
44  
   
Missed calls  
Your phone will keep track of the last 10 calls you have  
missed if you weren’t around to answer the call. Missed  
calls will appear in your phone only if it was turned on  
and in a service area when the call was missed.  
If the display says ‘Missed calls’  
Press List. To call back the displayed number, press  
ó. Press Exit to go back to the start screen.  
The ‘Options’ soft key  
Checking the missed calls list anytime  
Press Menu 2 1 (Call log - Missed calls), then scroll  
through the list.  
This shows you the phone numbers of the 10 most  
recent calls you’ve not answered.  
When the Forward if not answered option in the Call  
Forwarding feature (see page 22) is selected, your  
phone treats the forwarded calls as missed calls.  
Also, see “Call log” on page 23 for details on other call lists.  
NAM selection  
The service provider programs your phone with the  
phone number and system information into your  
phone’s memory when your phone is first activated.  
This is called a Number Assignment Module (NAM).  
For example, your phone can be activated in up to 3  
different service areas (e.g. one in Dallas, another in  
Chicago, and maybe one more in New York), each  
giving your phone a different phone number or account.  
Only one number can be active at a time. When you  
select a phone number, you’re also selecting which  
system you’re using as your home system (see “Sys-  
tem” on page 63). The first phone number displayed  
with this menu is the currently selected number.  
45  
     
Note: It may not be necessary to have three NAMs for your  
phone if your service provider has service or roaming agree-  
ments for each area in which you wish to use your phone.  
Contact your service provider for details.  
Selecting the NAM for your phone  
Press Menu 4 4 6 (Settings - Network services - NAM  
selection), highlight the phone number you want to use  
and press OK.  
Note: You need at least one active number to make calls.  
You can not change from one NAM to another during a call.  
Network feature setting  
Call forwarding (page 22), Call waiting (page 25) and  
Send own number (page 61) are network services  
available through your service provider or dealer.  
When you subscribe to any of these services, your  
service provider or dealer gives you a separate feature  
code to activate each service. Deactivation codes are  
used to deactivate each service.  
Once you store the appropriate code in your phone, the  
service appears as a menu item. You can then use the  
menu to activate and deactivate these services.  
Each time you use a feature that requires a feature  
code, that code is sent to the network to verify you’re  
using the correct feature code.  
Note: If your phone has more than one phone number pro-  
grammed, any feature codes stored will apply only to your  
primary phone number, or NAM 1.  
See “NAM selection” on page 45 for details on NAM.  
Storing codes  
1. Press Menu 4 4 5 (Settings - Network services -  
Network feature setting)  
2. At Feature Code:, enter the feature code or deacti-  
vation code received from your dealer (e.g. 74,  
740, etc.), press OK  
46  
 
3. W to the service that the code applies to and press  
Select  
4. W to suboption, then Select (Repeat step as  
required, based on number of suboptions)  
(Use step four only for call forwarding options)  
5. W to Activate or Cancel, then press OK  
Network services  
Some of the features in this menu are network services  
that require a subscription. See your service provider for  
details and availability.  
4-4-1 Voice privacy - See page 71.  
4-4-2 Call forwarding * - See page 22.  
4-4-3 Call waiting * - See page 25.  
4-4-4 Send own number * - See page 61.  
4-4-5 Network feature setting - See page 46.  
4-4-6 NAM selection - See page 45.  
* These features will not appear in the menu unless they are  
activated using Network feature setting. See “Network fea-  
One-touch dialing  
This feature allows you to make phone calls quickly and  
easily with the touch of a button.  
You must store names and numbers in your phone  
book (see page 50) before you can use this feature.  
Then you can assign a name from the phone book to a  
one-touch dial location using your phone’s keys 2  
through 8.  
Note: Keys 1 and 9 are used exclusively for dialing your voice  
mailbox (see page 70) and for attempting emergency calls  
(see page 82) to the emergency number programmed into your  
phone (e.g. 911 or other official emergency number). The 2 key  
is for dialing a customer care operator (see page 33), which can  
be overwritten if you prefer.  
47  
 
Assigning one-touch dial locations  
1. Press Names, scroll to 1-touch dialing and press  
Select  
2. Scroll to next available empty location, (empty) will  
appear, then press Assign  
3. Scroll to select desired name and press Select  
4. Repeat as necessary  
Calling a number using one-touch dialing  
Note: The 2 key is for dialing a customer care operator, which  
can be overwritten if you prefer.  
Press and hold the key (2 through 8) for a few  
seconds to call the number in the corresponding  
one-touch dial location.  
Note: If you press and hold 1, your phone calls your voice mail-  
box. If you press and hold 9, and Emergency key 9 (Menu 4 1)  
is ON, your phone attempts a call to the emergency number  
programmed into your phone (e.g. 911 or other official emer-  
gency number).  
Changing numbers in one-touch dial list  
With this feature, you can assign a different number to  
any one-touch dial location.  
1. Press Names, scroll to 1-touch dialing and press  
Select  
2. Scroll to the location you wish to change and press  
Options  
3. Scroll to Change, then press Select  
4. Scroll through phone book to select new number  
and press Select  
Erasing one-touch dial locations  
1. Press Names, scroll to 1-touch dialing and press Select  
2. Scroll to the location you wish to erase and press  
Options  
3. Scroll to Erase, press Select, then press OK at  
Erase?  
48  
Outbox  
This is where all outgoing messages are stored.  
Paging  
You can receive pages with your phone.  
Phone book  
You can store up to 199 numbers and associated  
names in your phone’s memory. These numbers are  
right at your fingertips for easy dialing.  
Things to know about the phone book  
Stored numbers may be up to 32 digits long.  
Stored names may be up to 16 characters long.  
You can not store identical names into your phone  
(i.e., John, John); make sure that like names are some-  
what different in the phone book (i.e., John, Johnny).  
Replace? followed by the currently stored name displays  
when storing a name already in memory.  
Accessing the phone book  
Press Names, scroll to desired submenu and press  
Select.  
About the submenus  
The phone book has several submenus from which you  
can choose.  
Search allows you to search for a specific name.  
Add new allows you to enter new names and numbers.  
Options lets you choose your scrolling view, as well as  
to show memory status.  
1-touch dialing allows you to assign up to seven one-  
touch dial locations (see page 47 for details).  
Caller groups allows you to rename or change the ringing  
tone for a caller group (see“Caller groups” on page 26).  
49  
 
Erase all lets you erase every name and number in your  
phone book. You can erase one name and number at a  
time by pressing Details, then Options when viewing a  
name already in the directory.  
Storing a name and number  
1. Press Names  
2. Scroll to Add new and press  
Select  
3. Enter name using the keypad  
(use # to switch between  
upper and lower case) and press OK  
4. Enter phone number and press OK  
Changing a number stored with a name  
1. Recall stored name, then press Details to view  
number  
2. Press Options, scroll to Edit and press Select  
3. Press OK while name is displayed, unless you wish  
to change it. If so, press and hold Clear, re-enter  
name and press OK  
4. Press and hold Clear to erase number or use the W  
and V keys to edit  
5. Enter new number  
6. Press OK to save new number  
Recalling names & numbers  
At the start screen, press W or V to view names in  
directory. Then scroll to the person you wish to call and  
press  
ó
to dial the number (phone will display  
number dialed to confirm).  
50  
 
Recalling numbers by name  
At the start screen, press Names. Then press the  
number on the keypad with the corresponding first  
letter of the name you wish to call.  
You can also recall numbers by name by pressing  
Names, then press Select at Search. Enter the name of  
the person you wish to recall and press OK.  
Erasing stored names and numbers  
1. Recall stored name  
2. Press Details  
3. Press Options  
4. Highlight Erase, then press Select, then OK  
Note: You can not undo Erase functions, so be careful!  
Erasing your entire phone book  
1. Press Names  
2. Scroll to Erase all and press Select  
3. Press OK at Are you sure?  
4. Enter security code at Security code: and press OK  
Warning: This feature will erase your entire phone book,  
which can not be undone!  
Phone lock  
When you turn this on, your phone will lock after you  
switch your phone off and back on. Then, each time  
you turn your phone on, it will prompt you for a lock  
code when you press either Names or Menu.  
When the phone lock is on, you can not access most of  
your phone’s memory and menu features, or make  
phone calls without entering the lock code.  
Turning on phone lock  
Press Menu 4 3 2 1 (Settings - Security settings - Access  
codes - Phone lock). Enter the lock code then press OK.  
Then scroll to On, and press OK again.  
51  
     
When your phone is locked, calls may be possible to  
the emergency number programmed into your phone  
(e.g. 911 or other official emergency number) including  
calls with Emergency key 9 (page 35).  
You can also store a number in the Unlocked phone  
number location, which allows you to call this number  
even though your phone is locked (see page 69 for  
details).  
Answering a call with phone lock on  
Press any key except  
ô
and  
Turning off phone lock  
Press Menu 4 3 2 1 (Settings - Security settings - Access  
codes - Phone lock). Enter lock code and press OK.  
Then scroll to Off and press OK again.  
With phone lock off, you can now use your phone  
without entering the lock code each time you turn your  
phone on.  
Phone settings  
Phone settings allow you access to other phone  
features such as an alarm clock and your phone’s  
language.  
Using phone settings  
Press Menu 4 2 (Settings - Phone settings), then scroll to  
one of the following options, then press Select:  
4-2-1 Clock - See page 31.  
4-2-2 Alarm clock - See page 16.  
4-2-3 Touch tones - See page 67.  
4-2-4 Restore factory settings - See page 54.  
4-2-5 Language - See page 41.  
52  
 
Profiles  
Now you can adjust and customize  
your phone to whatever envi-  
ronments you find yourself in  
(i.e. meetings, a movie, etc.).  
With Profiles, you can control your  
phone’s ringing volume, ringing tone, message alert,  
keypad tones, warning and game tones, etc., in a  
matter of seconds.  
Note: Restore factory settings (see page 54) will reset any  
changes made in Profiles back to the factory defaults.  
The default setting is Normal.  
Accessing Profiles  
Press Menu 3  
Selecting different Profiles  
If you want to change your phone’s Profile, quickly  
press the  
key. Quickly press  
again to scroll  
through each choice, then press and hold the key for  
a second to select that Profile.  
You can also scroll through the list of Profiles with a  
quick press of the  
key. Then press W or V to choose  
another Profile and press OK.  
Either way, this only allows you to select other Profiles;  
you can not customize them here. Keep reading to  
learn how to customize a Profile.  
Customizing Profiles  
Press Menu 3 (Profiles) and scroll to desired Profile, then  
press Options.  
Once Options is selected, Select, Customize and Rename  
will appear as your choices. Once you have selected  
one of these items, press OK. If you wish to go back to  
the main menu, press Back.  
Select activates the currently highlighted Profile.  
53  
 
Customize allows you to customize a Profile by changing  
the current settings.  
Rename allows you to rename the Profile.  
When you select Customize, press OK and you’ll have  
access to several lists and sub-menus that will enable  
you to adjust the settings on the current Profile.  
Note: Car and Headset will not appear in the Profiles list unless  
your phone is connected to a car kit or a headset. However,  
they will remain in the menu once connected for the first time.  
Note: When you change a setting in the current Profile, it only  
affects that Profile and will not change your phone’s normal  
settings.  
Renaming profiles  
1. Press Menu 3 (Profiles)  
2. Scroll to desired Profile and press Options  
3. Scroll to Rename and press OK  
4. Enter new name and press OK again  
Note: Some profiles can not be renamed.  
Received calls  
This shows you the phone numbers of the 10 most  
recent calls you’ve answered.  
Press Menu 2 3 (Call log - Received calls), then scroll  
through the numbers.  
Also, see “Call log” on page 23 for details on other call lists.  
The ‘Options’ soft key  
Restore factory settings  
You can reset the settings of many of your phone’s  
features to factory defaults (as in a new telephone).  
54  
   
Restoring factory settings  
Press Menu 4 2 4 (Settings - Phone settings - Restore  
factory settings), enter security code and press OK.  
Note: The memory, timers, language selection and security  
code is not reset. However, any Profiles you have modified will  
reset when you restore your settings.  
Renaming profiles  
Restrict calls  
This feature allows you to restrict incoming and  
outgoing calls. Outgoing calls are restricted from a list  
of restrictions that you create yourself.  
Restrict outgoing calls  
If no restrictions have been defined in your phone, you  
will notice only one option:  
Add restriction allows you to create your own list of  
outgoing call restrictions. The maximum number of call  
restriction groups you can define is 10.  
Once you have entered Add restrictionand have added at  
least one restriction, the following options will be added:  
Select allows you to select call restrictions from the  
outgoing calls list.  
Edit allows you to edit an existing outgoing call  
restriction.  
Erase will erase any existing outgoing call restrictions.  
Note: When calls are restricted, calls may be possible to the  
emergency number programmed into your phone (e.g. 911 or  
other official emergency numbers). However, Emergency key 9  
may not operate depending on the type of restriction you choose.  
Adding call restrictions  
1. Press Menu 4 3 1 (Settings - Security settings -  
Restrict calls)  
55  
 
2. Scroll to Restrict outgoing calls and press Select  
3. Enter the security code and press OK  
4. Scroll to Add restriction to create an outgoing call  
restriction and press OK  
5. Enter the number string you wish to restrict and  
press OK. For example:  
If you wish to restrict all calls that begin with 1,  
enter 1 (this will restrict all long distance calls)  
If you wish to restrict all calls that begin with 1972,  
enter 1972  
If you wish to restrict all calls that begin with 214,  
enter 214  
6. If you wish to enter a name for the call restriction,  
enter the name using your phones keypad, then  
press OK  
Restrict incoming calls  
1. Press Menu 4 3 1 (Settings - Security settings -  
Restrict calls)  
2. Scroll to Restrict incoming calls and press Select  
3. Enter security code, then press OK.  
4. Scroll to All calls and press Mark (or press Unmark  
if you wish to remove the restriction)  
5. Press Back and then press Yes at Save changes?  
Selecting call restrictions  
1. Press Menu 4-3-1 (Settings - Security settings -  
Restrict calls)  
2. Scroll to Restrict outgoing calls and press Select  
3. Enter the security code and press OK  
4. Scroll to Select and press OK  
5. Scroll to each restriction you wish to use and press  
Mark; press Unmark to deactivate existing restrictions  
6. Press Back and then press Yes at Save changes?  
56  
Editing call restrictions  
1. Press Menu 4-3-1 (Settings - Security settings -  
Restrict calls)  
2. Scroll to Restrict outgoing calls and press Select  
3. Enter the security code and press OK  
4. Scroll to Edit and press OK  
5. Scroll to the restriction you wish to edit, press OK  
Note: If no name has been entered for a restriction,  
the restricted number will be displayed  
6. Press and hold Clear to erase entire number, then  
enter the new characters. Or use or V to move  
the cursor to the desired location and delete a  
character or insert additional characters. Press OK  
when finished.  
7. Edit name if desired using same procedure as  
above  
Erasing call restrictions  
1. Press Menu 4-3-1 (Settings - Security settings -  
Restrict calls)  
2. Scroll to Restrict outgoing calls and press Select  
3. Enter the security code and press OK  
4. Scroll to Erase and press OK  
5. Scroll to the restriction you wish to erase, press OK  
6. Press OK again to erase restriction  
Ringing options  
This is one of the settings in your phone’s Profiles  
(see page 53). You can choose how your phone notifies  
you of an incoming call. This setting does not affect  
incoming text message alert tones (see page 63).  
Selecting ringing options  
1. Press Menu 3 (Profiles)  
57  
 
2. Your phone lists each profile. Use W to highlight the  
one you want to set the ringing options for and  
press Options.  
3. Highlight Customize and press OK. Press W to  
Ringing options, then press Select.  
4. Highlight either Ring, Ascending, Ring once, Beep  
once, Caller groups, or Silent and press OK  
Caller groups sets the phone to Silent except for calls  
from people in selected caller groups (see “Caller  
Press W or V to highlight the desired caller group(s),  
then press Mark to select or Unmark to de-select them.  
Ringing tones  
This is one of the settings in your phone’s Profiles (see  
page 53). It sets the ringing tone for incoming voice calls.  
If you set Ringing Options (see page 57) to Silent or Beep  
once, ringing tones are automatically off.  
Selecting ringing tones  
1. Press Menu 3 (Profiles)  
2. Your phone lists each profile. Use W to highlight the  
one you want to set the ringing tones for and press  
Options.  
3. Highlight Customize and press OK. Press W to  
Ringing tones, then press Select.  
4. Scroll through the options. After you hear the tone  
you wish to use, press OK.  
Ringing volume  
This is one of the settings in your  
phone’s Profiles (see page 53). It  
sets the default ringing volume for  
incoming voice calls, message alert  
tones and the alarm.  
58  
 
Setting the ringing volume  
1. Press Menu 3 (Profiles)  
2. Your phone lists each profile. Use W to highlight the  
one you want to set the ringing volume for and  
press Options.  
3. Highlight Customize and press OK. Press W to  
Ringing volume, then press Select.  
4. Scroll through the options. When you hear the  
volume level you wish to use, press OK.  
Note: The ringing volume setting is stored individually for the  
handsfree car kit and the headset.  
Roaming  
This is a term used to indicate that your phone is not in  
its home area. Calls made or received while roaming are  
usually more expensive than calls made in your home  
area.  
When roaming in some systems outside your home  
area, your phone may not be recognized by the host  
system (the one you’re travelling in) and you may not be  
able to place a call.  
Contact your service provider for more specific informa-  
tion on how roaming works with your phone, as well as  
any information on coverage limitations.  
Roaming Indicators  
When your phone begins roaming, it will beep once and  
display ROAM or EXTENDED AREA, depending on how  
roaming works with your phone. Contact your service  
provider for more details. If your phone is not roaming  
(i.e. in its home area) it will either display HOME or the  
name of the service provider.  
Saved  
This is where saved text messages are stored.  
59  
Scrolling view  
There are three different options on how you can view  
the phone book. Your choices are:  
Name list shows all stored names in a scrolling list.  
Three names will appear at any given time. To view  
other names in the directory, scroll back and forth  
through the list using W or V. Name list is the default  
setting.  
Name+number displays individual names and numbers  
stored in your directory. Only one name will display on  
your screen at a time, with the corresponding phone  
number. Use W or V to view other names.  
Name only shows individual names only. To view other  
names, use W or V. You can view the corresponding  
phone number by pressing Details, then W or V.  
Selecting your scrolling view  
1. Press Names  
2. Scroll to Options, then press Select  
3. Press Select at Scrolling view  
4. Press W or V to select either Name list,  
Name+number, or Name only, then press OK  
Security settings  
This menu includes the following security features:  
4-3-1 Restrict calls - See page 55.  
4-3-2 Access codes - See page 16.  
The Access codes submenu includes Phone lock  
(page 51), Unlocked phone number (page 69), Change  
lock code (page 42), and Change security code (page 61).  
Security code  
Your phone will prompt you for a security code for cer-  
tain features. These features can be used only after the  
correct security code has been successfully entered.  
60  
   
Note: When entering your security code, ***** will appear on the  
display to keep others from viewing your code.  
If you make a mistake entering the code, erase the last  
digit entered by pressing Clear, or press and hold Clear.  
Then enter the correct code or press Back to exit the  
current feature.  
If you enter an incorrect security code (Code error will  
appear) five times in a row, your phone won’t accept  
any entries for the next five minutes.  
Your phone’s default security code is 12345. It’s highly  
recommended that you change this code at once, write  
it down, and store it in a safe place away from your  
phone.  
Changing your security code  
1. Press Menu 4 3 2 4 (Settings - Security settings -  
Access codes - Change security code)  
2. Enter security code and press OK  
3. Enter new security code at Enter new security  
code:, press OK  
4. Enter new security code again at Verify new security  
code:, press OK  
5. Phone will display Security code changed  
Note: If you have changed your security code and don’t  
remember the new code, contact your service provider.  
Once you have changed your security code, the default setting  
is no longer valid.  
Send own number  
In most service areas, when you call someone your  
name will be presented to his/her caller ID (if they sub-  
scribe). This feature allows you to block their caller ID  
(i.e. your number will not be presented) when you call  
them. This feature works on a per-call basis. Contact  
your service provider for more details.  
Note: Before you can deactivate this feature, you must first  
store the feature code given to you by your service provider.  
61  
   
Otherwise, this feature may not appear in the menu.  
Note: This feature is only effective when calling to a number that  
is equipped with Caller ID.  
1. Press Menu 4 4 4 (Settings - Network services - Send  
own number)  
2. W to Yes (to show your number) or No (to not show  
it) and press OK  
3. Enter the number you wish to call (or press Search  
to retrieve the number from the phone book and  
press OK), then press OK  
4. Your phone will attempt to call this number with  
the feature code you stored in Menu 4 4 5  
Settings  
This main menu allows you access to other features.  
See these individual entries for more information.  
4-1 Call settings - See page 24.  
4-2 Phone settings - See page 52.  
4-3 Security settings - See page 60.  
4-4 Network services - See page 47.  
Storing a name & number  
You can save names and numbers in the Phone book.  
Either use the method described in “Storing a name and  
number” on page 50 or the “quick save” method  
described below.  
Quick save  
Enter the phone number and press Save. Enter a name  
at Name: if you wish (optional), then press OK.  
62  
 
System  
Your phone is capable of working in Residential, Private,  
and Public Systems (such as your Home System). You  
can choose how your phone selects a network to use.  
This feature is Menu 5 in your phone. The default is  
Automatic, which means your phone automatically  
searches for networks available to you and chooses the  
appropriate one. Every time you switch on your phone,  
it resets this to Automatic.  
If you choose Manual, your phone searches for net-  
works, then begins displaying them. Your phone  
displays AVAILABLE: or NOT AVAILABLE: for the systems  
it finds (You can not use NOT AVAILABLE: systems). Use  
the W key to scroll through the choices, and press OK  
when you see the one you want.  
If you choose New Search, your phone begins a new  
search for new Private and Residential systems. When  
it finds the best new system, it displays it. You can then  
Select it, or start another search by pressing Next.  
Note: If you have two phone numbers (two NAMs), the Manual  
and New search features are only used with your primary  
phone number (NAM 1). See “NAM selection” on page 45 for  
more information concerning NAMs.  
To switch from private to public  
If you are in a private system and want access to a  
public system, press and hold Menu when you are not  
in a call. Your phone will display Search public systems?,  
press OK and your phone will use the public system for  
the next (only once) outgoing call. After that it goes back  
to Automatic system selection.  
Text messages and pages  
Before you can send or receive text messages and  
pages, you must subscribe to the text messaging  
network service.  
63  
   
Some or all of these features may not be available in  
some wireless systems. Please see your service  
provider for details and availability.  
Note: Text messages that you receive with your phone may  
appear different at times, due to messages that originate in  
networks other than your own.  
Also, the maximum length of a text message may depend on  
the network’s capabilities.  
Text message options  
When you access Text messages, you will view a screen  
with five different options.  
Inbox is where incoming messages are received and  
stored. All new, unread messages are kept here.  
Write new allows you to write text messages.  
Outbox is where outgoing messages are stored.  
Saved is where all saved, read messages are kept.  
Erase all allows you to erase all text messages. However,  
unread text messages will not be erased. Erase all can  
be found quickly when you access Text messages by  
pressing V.  
Writing text messages  
Note: Writing and sending text messages may not be available  
in all wireless systems. Please contact your service provider for  
details.  
Sending text messages  
1. Press Menu 1 1  
2. Scroll to Write New and press Select  
3. Write your message using the keypad and press  
Options  
4. To send the text message, press OK with Send  
highlighted  
5. Enter the phone number (or press Search to locate  
in the phone book), then press Send  
64  
Sending options  
If you press Options when sending a text message,  
you’ll find the following choices:  
Send sends the message  
Settings allows you to mark your messages (see below)  
Save will save your message to the Saved folder.  
Clear screen will clear the message screen.  
Message settings  
Urgent will notify recipient that your message is important.  
When you receive an Urgent message, the message will  
be marked with an exclamation point (!) in front of it.  
Read receipt notifies you that the recipient has opened  
your message.  
Callback no. will place your phone number within the  
message. This is the default setting and it is set to on.  
Receiving text messages  
Your phone has space for up to 30 text messages,  
depending on the length of each message.  
When you receive a text message  
Text messages are shown in the order that they were  
received, in their order of priority.  
Message received indicates an unread message or page.  
If more than one message is received, the number of  
received messages will be listed first.  
New emergency message indicates that the message or  
page received was sent by someone via the service  
provider. Emergency messages are sent only in  
situations where life and/or property are in immediate  
danger. Emergency messages are listed first and will  
override all other messages.  
Urgent messages are also high priority messages.  
65  
Reading text messages  
With Message received displayed, press Read and scroll  
to new message, then press Read again  
Reading options  
Press Options while a text message is displayed to  
access the following reading options:  
Read next allows you to read the next message.  
Erase will erase the message.  
Save will save the message to the Saved folder.  
Call back will automatically call whoever sent the  
message if any phone numbers are included within the  
message.  
Forward allows you to forward the message to someone  
else.  
Reply allows you to reply to the received message.  
Calling someone back in a message  
Press  
number quickly.  
ó
while the message is displayed to dial the  
Or, with the message and the phone number displayed  
on your phone’s screen, you can press Options, scroll  
and select Call back, then press OK.  
Note: If more than one number is on the display, the numbers  
to call and press  
display No number found on this screen.  
are displayed in aólist. Simply select the phone number you want  
. If no numbers are found, your phone will  
Forwarding a message  
Note: This feature is only available if your phone has been  
activated in a wireless system that supports the sending of  
text messages.  
With the message displayed, press Options, scroll to  
Forward and press OK. Then send the message as you  
normally would.  
66  
Replying to a message  
Note: This feature is only available if your phone has been  
activated in a wireless system that supports the sending of  
text messages.  
With the message displayed, press Options, scroll to  
Reply and press OK. Then write your reply and send the  
message as you normally would.  
If a phone number appears in the message you received,  
it’s used as the default for the reply you’re sending.  
This can be replaced by another number, if you wish.  
Receiving a page  
Your phone displays Message received. The message  
reads Call:, followed by the name or number of the  
person who paged you. Names will appear only if that  
person has been stored in the phone book.  
When your phone’s memory is full  
One or more messages, of lowest priority, will automa-  
tically be deleted in order to receive new text messages  
when your phone’s memory is full.  
If the message memory is still full, your phone will  
display No space: message waiting. You can clear this  
notification by pressing OK.  
Note: Messages are usually deleted from your Inbox. An incoming  
emergency message may delete messages from your Saved  
folder.  
Touch tones  
Your phone can generate various sounds, called touch  
tones, when the keys are pressed. These are also  
known as DTMF tones.  
Touch tones can be used for many automated, over-  
the-phone services such as checking bank balances,  
airline arrival and departure times, and using voice  
mailbox options. Touch tones can be sent only when a  
call is active.  
67  
 
Storing touch tone strings  
Touch tone strings can be used for sending and  
receiving information with your phone. For example,  
you can store your office voice mailbox number, along  
with your password for easy access to your messages.  
Store touch tone strings the same way you store  
phone numbers (see page 50).  
You can store a whole digit sequence in your phone  
book and send it as touch tones for frequently-used  
strings of numbers.  
Sending a touch tone string  
Make sure Menu 4 2 3 1 (Settings - Phone settings -  
Touch tones - Manual touch tones) is not set to Off.  
1. During a call, press Options  
2. Scroll to Touch tones and press OK  
3. Enter touch tone string or recall string from the  
phone book and press OK  
Note: Use caution when sending confidential information over  
the air when using DTMF tones in analog mode.  
Storing touch tone strings with phone numbers  
1. Enter the phone number (e.g. your office voice  
mailbox)  
2. Press ∗∗∗ (p) or ∗∗∗∗ (w)  
3. Enter the touch tone string (e.g. voice mailbox  
password)  
4. Store the number as you normally would  
page 37 for details on “p” and “w” characters.  
When you dial this number, your phone first dials the  
phone number, then waits (because of the “w”  
character) for you to press Send. Your phone then  
sends your password.  
If you include a “p” character instead of a “w”, your  
phone pauses for 2.5 seconds, then automatically  
sends your password as touch tones.  
68  
 
Touch tone length  
This feature determines the length of each touch tone  
when they are sent automatically.  
Short sets the tone length to .1 second. Long sets the  
tone length to .5 second.  
You can set the touch tone length by pressing Menu  
4 2 3 2 (Settings - Phone settings - Touch tones - Touch  
tone length).  
Unlocked phone number  
When the phone lock is on (see page 51), no calls can  
be made. However, you can store one number into your  
phone that can be called when it’s locked.  
Storing the unlocked phone number  
1. Press Menu 4 3 2 2 (Settings - Security settings -  
Access codes - Unlocked phone number)  
2. Enter lock code and press OK  
3. Enter phone number at Number: (or press Search  
and scroll through the phone book)  
4. Press OK  
Calling the unlocked phone number  
Note: Your phone must be locked to use this feature.  
Press W or V once, then  
enter the phone number as it is stored and press  
ó
or you can manually  
ó
.
Vibrating alert  
This is one of the settings in your phone’s Profiles  
(see page 53). When your phone has the vibrating  
battery attached, you can set your phone to vibrate  
when you receive a voice call.  
Note: This setting will not appear in your phone unless a  
vibrating battery has been attached.  
69  
   
Activating vibrating alert  
1. Press Menu 3 (Profiles)  
2. Your phone lists each Profile. Use W to highlight the  
one you want to set the vibrating alert for and press  
Options.  
3. Highlight Customize and press OK. Press W to reach  
Vibrating alert, then press Select again.  
4. Use W to highlight On or Off and press OK. If you  
choose On, your phone will vibrate even if you have  
set Ringing options (see page 57) to Silent.  
"The vibrating battery does not vibrate when the phone is  
connected to or placed in any charging device."  
Voice mailbox number  
This number dials your voice mailbox.  
See “Voice messages” in next section.  
Voice messages  
Voice mail is a network service that may require a  
subscription from your service provider.  
Your phone will notify you when you receive a voice  
message. New voice message will appear on the display  
along with the  
icon, and you’ll hear a short beep.  
Your phone will display the number of voice messages  
if you’ve received more than one.  
Setting up your voice mailbox number  
Before you can retrieve any voice messages, you need  
to store your voice mailbox number. Your service  
provider usually gives this number to you.  
When you’re ready to store your voice mailbox number,  
press Menu 1 2 2 (Messages - Voice messages - Voice  
mailbox number). Then enter your voice mailbox phone  
number and press OK. This number can be up to 32  
digits long and is used until it’s changed. So if your  
phone number changes, you may need to change your  
voice mailbox number along with it.  
70  
 
Greetings, passwords, and prompts  
These may vary in different wireless systems. So if you  
need information about how to record your greeting or  
how to store your password, contact your service  
provider. You’ll also need to contact them on how to  
listen to voice messages once you’re connected to your  
voice mailbox.  
Listening to your voice messages  
If New voice message is displayed, just press Listen and  
follow the prompts. If you’d rather listen to your  
messages later, press Exit.  
You can listen to messages anytime if you press and  
hold the 1 key; Calling voice mailbox will appear on the  
display. Or if you prefer, you can access your voice  
mailbox by pressing Menu 1 2 1 (Messages - Voice  
messages - Listen to voice messages).  
Voice privacy  
Note: This feature may not be available in all areas. Please see  
your service provider for details and availability.  
Used only in digital networks, voice privacy encrypts the  
voice channel so that people can not eavesdrop on  
your conversation.  
Voice privacy will become active only during a call and  
will notify you with a beep. Voice privacy active will also  
appear on the display.  
If you turn this feature on and voice privacy becomes  
inactive for any reason, your phone displays Voice  
privacy not active and beeps.  
You may set this to On or Off by pressing Menu 4 4 1  
(Settings - Network services - Voice privacy).  
Volume  
You can adjust the ringing volume and earpiece volume  
with your phone.  
71  
 
Warning and game tones  
This is one of the settings in your phone’s Profiles  
(see page 53). Warning and game tones include tones  
your phone makes for conditions such as errors, confir-  
mations, power on, battery low, recharge battery and  
games. You can set warning and game tones on or off.  
Turning warning and game tones on and off  
1. Press Menu 3 (Profiles)  
2. Your phone lists each Profile. Use W to highlight the  
one you want to set the warning and game tones  
for and press Options.  
3. Highlight Customize and press OK. Press W to  
Warning and game tones, then press Select.  
4. Scroll to On or Off and press OK  
Welcome note  
You can program a welcome note into your phone to  
display a message when you first turn it on (i.e. hello,  
your name, a reminder, etc.). The maximum length is 36  
characters.  
1. Press Menu 1 3 (Messages - Welcome note)  
2. Enter new message or edit an existing one, then  
press Options  
3. Press W to Save or Erase and press OK  
The welcome note displays each time your phone is  
switched on. Characters you enter are added to the left of  
the cursor. Press Clear to delete characters to the left of  
the cursor. Press W or V to move the cursor right or left.  
Write new  
This feature allows you to write text messages with your  
phone.  
72  
   
6. Accessories  
If you want to enhance your phone’s functionality, an  
extensive range of accessories is available for you.  
You can select any of these items to help accommodate  
your specific communication needs. For availability of  
these and other accessories, contact your service  
provider.  
A few practical rules for accessory operation:  
Keep all accessories out of reach of small children.  
When you disconnect the power cord of any  
accessory, grasp and pull the plug, not the cord.  
Check regularly that any vehicle-installed accesso-  
ries are mounted and are operating properly.  
Installation of any complex car accessories must  
be made by qualified personnel only.  
Use only batteries, chargers and accessories approved by the  
phone manufacturer for use with this particular phone model.  
The use of any other types may invalidate any approval or  
warranty applying to the phone, and may be dangerous.  
See page 6 for important battery usage information.  
Batteries  
The following table shows battery options that are  
available for your phone, charging times with the Rapid  
Travel Charger (ACP-9U) and the Standard Travel  
Charger (ACP-7U), talk times, and standby times.  
Consult your service provider for more information.  
73  
Charging Times  
ACP-7U ACP-9U  
Charger Charger  
Battery Option  
BPS-1 Ultra Slim Li-Polymer Battery 600 mAh  
BLS-2N Extended Li-Ion Battery 900 mAh  
2 hrs 30 min 1 hr 20 min  
4 hrs  
4 hrs  
2 hrs  
BMS-2/BMS-2S Extended NiMH Battery  
900 mAh  
1 hr 30 min  
BMS-2V Vibrating NiMH Battery 900 mAh  
BLS-4 Extended Li-Ion Battery 1500 mAh  
4 hrs  
5 hrs  
1 hr 30 min  
3 hrs 30 min  
Note: The times displayed above are approximate and will allow  
your battery to obtain approximately 80% of its capacity. At this  
time, the battery scroll bars on your phone’s display will stop  
scrolling. If you wish to obtain 100% battery capacity, please  
allow another two hours to “trickle” or “maintenance” charge.  
Standby and Talk Times  
Digital  
Talk Time Talk Time  
Analog  
Standby  
Time  
Battery Option  
BPS-1 Ultra Slim  
Li-Polymer Battery  
600 mAh  
1 hr 20 min to  
2 hrs 10 min  
40 min to  
1 hr 15 min 20 to 33 hrs (ana)  
66 to 133 hrs (dig)  
BLS-2N Extended  
Li-Ion Battery  
900 mAh  
2 hrs to  
3 hrs15 min  
1 hr to  
100 to 200 hrs (dig)  
1 hr 50 min 30 to 50 hrs (ana)  
BMS-2/BMS-2S  
Extended NiMH Battery  
900 mAh  
2 hrs to  
3 hrs15 min  
1 hr to  
100 to 200 hrs (dig)  
1 hr 50 min 30 to 50 hrs (ana)  
BMS-2V Vibrating  
NiMH Battery  
900 mAh  
2 hrs to  
3 hrs15 min  
1 hr to  
100 to 200 hrs (dig)  
1 hr 50 min 30 to 50 hrs (ana)  
BLS-4 Extended  
Li-Ion Battery  
1500 mAh  
3 hrs 10 min to 1 hr 35 min to 170 to 335 hrs (dig)  
5 hrs 10 min 2 hrs 50 min 50 to 83 hrs (ana)  
Note: The times shown are approximate. Battery operation  
times vary according to signal conditions, network parameters  
set by the service provider, and how you use your phone.  
74  
   
Chargers & other accessories  
The following chargers and other accessories are  
available for your phone; please see your dealer for  
details. Also, refer to the accessories brochure that was  
included in your sales package for the entire line of  
Nokia Original Accessories.  
Note: When a charger is not in use, disconnect it from the pow-  
er source. Do not leave the battery connected to a charger for  
longer than a week, since overcharging may shorten its life. If left  
unused, a fully charged battery will discharge itself over time.  
Standard Travel Charger  
(ACP-7U)  
This lightweight (187g) and  
durable AC charger can be  
used with all battery options.  
To use the Standard Travel  
Charger, plug it into a wall out-  
let and connect the lead from  
the charger to the base of your  
phone. The charger can also be used together with the  
Compact Desktop Charging Stand (DCH-9).  
Rapid Travel Charger (ACP-9U)  
This lightweight (100g) AC charger  
can be used with all battery options.  
Calls can be made during charging,  
even with a fully discharged battery.  
To use the Rapid Travel Charger  
(ACP-9U), plug it into a standard  
120V AC wall outlet, and connect the  
lead from the charger to the base of  
your phone.  
The charger can also be used together with the optional  
Compact Desktop Charging Stand (DCH-9).  
Approximate charging times for discharged batteries  
are shown at the beginning of this section.  
75  
Rapid Mobile Charger (LCH-8)  
You can charge your  
phone’s battery from  
your vehicle battery by  
using the Rapid Mobile  
Charger (LCH-8). You  
can also use this light-  
weight charger with the  
Compact Desktop Charging Stand (DCH-9).  
Calls are possible during charging. A green light  
indicates the charger is ready for charging (when not  
charging) or finished charging (if it has been charging).  
The battery charging times are the same as those for  
the Rapid Travel Charger (ACP-9U)  
The input voltage range is from 11 to 32V DC, negative  
grounding. Avoid prolonged charging with the Rapid  
Mobile Charger (LCH-8) when the car engine is not  
running; this may cause the battery of your car to drain.  
Note also that in some cars the cigarette lighter plug is  
not provided with electricity if the ignition is not  
switched on.  
Compact Desktop Charging Stand (DCH-9)  
Used together with the  
Standard Travel Charger  
(ACP-7U) or the Rapid Travel  
Charger (ACP-9U), the  
Compact Desktop Charging  
Stand (DCH-9) is an eco-  
nomical choice when you  
need your phone close at hand, always ready for calls.  
This charging stand allows you to charge your phone’s  
battery in the front charging slot, plus a spare battery in  
the rear charging slot.  
When charging both batteries simultaneously, charging  
will begin in the front charging slot and then move to the  
rear slot once the front battery is 100% charged.  
76  
Please refer to the chart below for charging times in the  
rear charging slot.  
DCH-9 Rear Slot Charging Times  
Using ACP-7U  
Using ACP-9U  
Battery Option  
When front When front When front When front  
slot empty  
occupied  
slot empty  
3 hrs  
occupied  
BPS-1Ultra Slim  
Li-Polymer Battery  
600 mAh  
4 hrs  
30 min  
6 hrs  
30 min  
4 hrs  
30 min  
BLS-2N Extended  
Li-Ion 900 mAh  
BMS-2/BMS-2S  
Extended  
NiMH 900 mAh  
6 hrs  
30 min  
8 hrs  
30 min  
4 hrs  
10 min  
5 hrs  
25 min  
BMS-2V Vibrating  
NiMH 900 mAh  
BLS-4 Ultra  
Extended  
Li-Ion 1500 mAh  
15 hrs  
40 min  
10 hrs  
30 min  
12 hrs  
8 hrs  
Note: Please note that if you are charging a battery in the rear  
charging slot while another battery occupies the front slot,  
please allow an additional two hours for a “maintenance”  
charge for the battery in the front slot. Please see page 74  
for charging times for the front charging slot.  
If you’re charging a battery in the front charging slot,  
charging is indicated by the scrolling battery bars on the  
right side of your phone’s display. When the scrolling  
stops, the battery is approximately 80% charged.  
A battery will be fully charged a couple of hours after  
the scrolling stops.  
Also, you may notice a light indicator on the stand,  
which is used for charging a spare battery. A green light  
indicates a battery is at least 80% full; the red light  
indicates a battery is charging.  
77  
7. Troubleshooting  
What if charging fails?  
If Not charging is displayed, charging is suspended.  
Make sure the battery is connected to an approved  
charging device and that the battery is at room temper-  
ature. Extreme temperatures, hot or cold, can affect  
your battery’s performance and prevent charging.  
If charging still fails, disconnect the charger from your  
phone. Then reconnect the charger to your phone and  
retry. If you still experience charging problems, contact  
your dealer and, if necessary, bring your phone in to  
have it serviced. Also remember to bring in your battery  
and charger.  
No service  
If you’re outside the wireless service area, No service will  
display on your phone. No calls can be made or  
received, however, emergency 911 calls may still be  
possible.  
What if the call doesn’t go through?  
Your phone can make and receive calls only when it’s  
switched on and in the wireless network’s service area.  
No service means that you’re probably outside the wire-  
less service area. No calls can be made or received.  
Check call restrictions means calls to the phone number  
you tried to call are restricted (see “Restrict calls” on  
page 55), or your phone is locked (see “Phone lock” on  
page 51).  
Note: Check with your service provider for information about  
when you need to dial a ‘1’ and/or an area code in addition to  
the number.  
If you make a mistake dialing  
Press Clear to delete the last character entered, or  
press and hold Clear to delete all characters entered.  
78  
8. Reference Information  
Important Safety Information  
Traffic Safety  
Do not use a hand-held telephone while driving a vehicle.  
If using a hand-held phone park the vehicle before conversing.  
Always secure the phone in its holder; do not place the phone  
on the passenger seat or where it can break loose in a collision  
or sudden stop.  
The use of an alert device to operate a vehicles lights or horn  
on public roads is not permitted.  
Remember, road safety always comes first!  
Operating Environment  
Remember to follow any special regulations in force in any area  
and always switch off your phone whenever it is forbidden to  
use it, or when it may cause interference or danger.  
When connecting the phone or any accessory to another de-  
vice, read its users guide for detailed safety instructions. Do not  
connect incompatible products.  
As with other mobile radio transmitting equipment, users are  
advised that for the satisfactory operation of the equipment and  
for the safety of personnel, it is recommended that the equip-  
ment should only be used in the normal operating position (held  
to your ear with the antenna pointing over your shoulder).  
Electronic Devices  
Most modern electronic equipment is shielded from radio  
frequency (RF) signals. However, certain electronic equipment  
may not be shielded against the RF signals from your wireless  
phone.  
Pacemakers  
Pacemaker manufacturers recommend that a minimum separa-  
tion of 6 inches (20 cm.) be maintained between a handheld  
wireless phone and a pacemaker to avoid potential interference  
with the pacemaker. These recommendations are consistent  
with the independent research by and recommendations of  
Wireless Technology Research. Persons with pacemakers:  
Should always keep the phone more than 6 inches (20 cm)  
from their pacemaker when the phone is switched on;  
79  
 
Should not carry the phone in a breast pocket;  
Should use the ear opposite the pacemaker to minimize  
the potential for interference.  
If you have any reason to suspect that interference is  
taking place, switch off your phone immediately.  
Hearing Aids  
Some digital wireless phones may interfere with some hearing  
aids. In the event of such interference, you may want to consult  
your service provider.  
Other Medical Devices  
Operation of any radio transmitting equipment, including cellular  
phones, may interfere with the functionality of inadequately  
protected medical devices. Consult a physician or the manufac-  
turer of the medical device to determine if they are adequately  
shielded from external RF energy or if you have any questions.  
Switch off your phone in health care facilities when any regula-  
tions posted in these areas instruct you to do so. Hospitals or  
health care facilities may be using equipment that could be  
sensitive to external RF energy.  
Vehicles  
RF signals may affect improperly installed or inadequately  
shielded electronic systems in motor vehicles (e.g. electronic  
fuel injection systems, electronic anti-skid (anti-lock) braking  
systems, electronic speed control systems, air bag systems).  
Check with the manufacturer or its representative regarding  
your vehicle. You should also consult the manufacturer of any  
equipment that has been added to your vehicle.  
Posted Facilities  
Switch your phone off in any facility where posted notices so  
require.  
Potentially Explosive Atmospheres  
Switch off your phone when in any area with a potentially explo-  
sive atmosphere and obey all signs and instructions. Sparks in  
such areas could cause an explosion or fire resulting in bodily  
injury or even death.  
80  
Users are advised to switch off the phone while at a refueling  
point (service station). Users are reminded of the need to ob-  
serve restrictions on the use of radio equipment in fuel depots  
(fuel storage and distribution areas), chemical plants or where  
blasting operations are in progress.  
Areas with a potentially explosive atmosphere are often but not  
always clearly marked. They include below deck on boats;  
chemical transfer or storage facilities; vehicles using liquefied  
petroleum gas (such as propane or butane); areas where the air  
contains chemicals or particles, such as grain, dust or metal  
powders; and any other area where you would normally be  
advised to turn off your vehicle engine.  
Vehicles  
Only qualified personnel should service the phone, or install the  
phone in a vehicle. Faulty installation or service may be danger-  
ous and may invalidate any warranty which may apply to the  
unit.  
Check regularly that all wireless phone equipment in your  
vehicle is mounted and operating properly.  
Do not store or carry flammable liquids, gases or explosive  
materials in the same compartment as the phone, its parts or  
accessories.  
For vehicles equipped with an air bag, remember that an air bag  
inflates with great force. Do not place objects, including both  
installed or portable wireless equipment, in the area over the air  
bag or in the air bag deployment area. If in-vehicle wireless  
equipment is improperly installed and the air bag inflates,  
serious injury could result.  
Switch off your phone before boarding an aircraft. The use of  
wireless telephones in an aircraft may be dangerous to the  
operation of the aircraft, disrupt the wireless telephone network  
and may be illegal.  
Failure to observe these instructions may lead to the suspension  
or denial of telephone services to the offender, or legal action, or  
both.  
81  
Emergency Calls  
IMPORTANT!  
This phone, like any wireless phone, operates using radio  
signals, wireless and landline networks as well as user-pro-  
grammed functions which can not guarantee connection in all  
conditions. Therefore, you should never rely solely upon any  
wireless phone for essential communications (e.g. medical  
emergencies).  
Remember, to make or receive any calls the phone must be  
switched on and in a service area with adequate signal strength.  
Emergency calls may not be possible on all wireless phone net-  
works or when certain network services and/or phone features  
are in use. Check with local service providers.  
Making an Emergency Call  
1. If the phone is not on, switch it on  
2. Press the  
ô
key to ready the phone for calls.  
(Press it twice if there are still digits on the display.)  
3. Key in the emergency number for your present  
location (e.g. 911 or other official emergency  
number). Emergency numbers vary by location.  
4. Press  
ó
If certain features are in use (keyguard, restrict calls, etc.), you  
may first need to turn those features off before you can make an  
emergency call. Consult this document and your local cellular  
service provider.  
When making an emergency call, remember to give all the ne-  
cessary information as accurately as possible. Remember that  
your wireless phone may be the only means of communication  
at the scene of an accident - do not cut off the call until given  
permission to do so.  
82  
   
Radio Frequency (RF) Signals  
THIS MODEL PHONE MEETS THE GOVERNMENT’S  
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.  
Your wireless phone is a radio transmitter and receiver. It is  
designed and manufactured not to exceed the emission limits  
for exposure to radiofrequency (RF) energy set by the Federal  
Communications Commission of the U.S. Government.  
These limits are part of comprehensive guidelines and establish  
permitted levels of RF energy for the general population.  
The guidelines are based on standards that were developed  
by independent scientific organizations through periodic and  
thorough evaluation of scientific studies. The standards include  
a substantial safety margin designed to assure the safety of all  
persons, regardless of age and health.  
The exposure standard for wireless mobile phones employs a  
unit of measurement known as the Specific Absorption Rate, or  
SAR. The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR  
are conducted using standard operating positions accepted by  
the FCC with the phone transmitting at its highest certified power  
level in all tested frequency bands. Although the SAR is deter-  
mined at the highest certified power level, the actual SAR level of  
the phone while operating can be well below the maximum value.  
This is because the phone is designed to operate at multiple  
power levels so as to use only the power required to reach the  
network. In general, the closer you are to a wireless base station  
antenna, the lower the power output.  
Before a phone model is available for sale to the public, it must  
be tested and certified to the FCC that it does not exceed the  
limit established by the government-adopted requirement for safe  
exposure. The tests are performed in positions and locations  
(e.g., at the ear) as required by the FCC for each model. The  
highest SAR value for this model phone when tested for use at  
the ear is 1.46 W/kg. While there may be differences between  
the SAR levels of various phones and at various positions, they  
all meet the government requirement.  
The FCC has granted an Equipment Authorization for this model  
phone with all reported SAR levels evaluated as in compliance  
with the FCC RF exposure guidelines. SAR information on this  
model phone is on file with the FCC and can be found under the  
Display Grant section of http://www.fcc.gov/oet/fccid after  
searching on FCC ID LJPNSW-3AX.  
_____________________________________________________  
*In the United States and Canada, the SAR limit for mobile phones  
used by the public is 1.6 watts/kg (W/kg) averaged over one  
gram of tissue. The standard incorporates a substantial margin  
of safety to give additional protection for the public and to  
account for any variations in measurements.  
83  
Care and Maintenance  
Your phone is a product of superior design and craftsmanship  
and should be treated with care. The suggestions below will  
help you to fulfill any warranty obligations and allow you to enjoy  
this product for many years. When using your phone, battery,  
charger, OR any accessory:  
Keep it and all its parts and accessories out of small  
children’s reach.  
Keep it dry. Precipitation, humidity and liquids contain  
minerals that will corrode electronic circuits.  
Do not use or store it in dusty, dirty areas as its moving  
parts can be damaged.  
Do not store it in hot areas. High temperatures can shorten  
the life of electronic devices, damage batteries, and warp  
or melt certain plastics.  
Do not store it in cold areas. When the phone warms up  
(to its normal operating temperature), moisture can form  
inside the phone, which may damage the phone's elec-  
tronic circuit boards.  
Do not attempt to open it. Non-expert handling of the  
device may damage it.  
Do not drop, knock or shake it. Rough handling can break  
internal circuit boards.  
Do not use harsh chemicals, cleaning solvents, or strong  
detergents to clean it. Wipe it with a soft cloth slightly  
dampened in a mild soap-and-water solution.  
Do not paint it. Paint can clog the device’s moving parts  
and prevent proper operation.  
Use only the supplied or an approved replacement  
antenna. Unauthorized antennas, modifications or attach-  
ments could damage the phone and may violate regula-  
tions governing radio devices.  
If the phone, battery, charger, or any accessory is not  
working properly, take it to your nearest qualified service  
facility. The personnel there will assist you, and if neces-  
sary, arrange for service.  
84  
9. Technical Data  
Wireless System  
Weight  
Dual-Band TDMA and AMPS  
165g (5.8 oz) with BMS-2/  
BMS-2S 900 mAh NiMH Battery  
140 cc  
Size  
Frequency Range  
Lowband  
824.04 - 848.97 MHz (TX)  
869.04 - 893.97 MHz (RX)  
1850.04 - 1909.92 MHz (TX)  
1930.08 - 1989.96 MHz (RX)  
Highband  
Transmitter Output Power  
Up to 600mW nominal  
Battery Voltage  
Charging current  
3.6 V nominal  
850 mAh max.  
Operating Temperature -20°C to + 40°C  
(-4°F to + 104°F)  
Number of Channels 832 lowband  
1997 highband  
Number of NAMs  
Memory Locations  
Memory Capacity  
3
199  
Alpha: 16 digits per location  
Numeric: 32 digits per location  
Nokia, Connecting People and the Original Accessories logos  
are trademarks of Nokia Corporation and/or its affiliates.  
The information contained in this phone was written for dual-  
mode TDMA and AMPS phones.  
The right to make changes and improvements to any of the  
products described in this guide without prior notice is reserved.  
© 2001 Nokia Inc. All rights reserved.  
These commodities are authorized by the U.S. Government for  
export only to Canada, Mexico, or the United States. They may  
not be resold, diverted, transferred, or otherwise disposed of in  
any other country, either in their original form or after being  
incorporated through an intermediate process into other end-  
items, without the written approval of the U.S. Department of  
State.  
Part No. 9352384 Issue No. 4 Phase 3 Printed in Canada 01/01  
85  
10. NOKIA One-Year Limited  
Warranty  
Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”)  
is free from defects in material and workmanship that result in  
Product failure during normal usage, according to the following  
terms and conditions:  
1. The limited warranty for the Product extends for ONE (1) year  
beginning on the date of the purchase of the Product.  
2. The limited warranty extends to the original purchaser of the  
Product (“Consumer”) and is not assignable or transferable to  
any subsequent purchaser/end-user.  
3. The limited warranty extends only to Consumers who  
purchase the Product in the United States.  
4. During the limited warranty period, Nokia will repair, or replace,  
at Nokia's option, any defective parts, or any parts that will not  
properly operate for their intended use with new or factory rebuilt  
replacement items if such repair or replacement is needed  
because of product malfunction or failure during normal usage.  
No charge will be made to the Consumer for any such parts.  
Nokia will also pay for the labor charges incurred by Nokia in  
repairing or replacing the defective parts. The limited warranty  
does not cover defects in appearance, cosmetic, decorative or  
structural items, including framing, and any non-operative parts.  
Nokia's limit of liability under the limited warranty shall be the  
actual cash value of the Product at the time the Consumer  
returns the Product for repair, determined by the price paid by  
the Consumer for the Product less a reasonable amount for  
usage. Nokia shall not be liable for any other losses or damages.  
These remedies are the Consumers exclusive remedies for  
breach of warranty.  
5. Upon request from Nokia, the Consumer must prove the date  
of the original purchase of the Product by a dated bill of sale or  
dated itemized receipt.  
6. The Consumer shall bear the cost of shipping the Product to  
Nokia in Melbourne, Florida. Nokia shall bear the cost of shipping  
the Product back to the Consumer after the completion of  
service under this limited warranty.  
7. The Consumer shall have no coverage or benefits under this  
limited warranty if any of the following conditions are applicable:  
a) The Product has been subject to abnormal use, abnormal  
conditions, improper storage, exposure to moisture or dampness,  
unauthorized modifications, unauthorized connections, un-  
authorized repair, misuse, neglect, abuse, accident, alteration,  
improper installation, or other acts which are not the fault of  
Nokia, including damage caused by shipping.  
86  
b) The Product has been damaged from external causes such  
as collision with an object, or from fire, flooding, sand, dirt,  
windstorm, lightning, earthquake or damage from exposure to  
weather conditions, an Act of God, or battery leakage, theft,  
blown fuse, or improper use of any electrical source, or damage  
caused by the connection to other products not recommended  
for interconnection by Nokia.  
c) Nokia was not advised by the Consumer in writing of the  
alleged defect or malfunction of the Product within fourteen (14)  
days after the expiration of the applicable limited warranty  
period.  
d) The Product serial number plate or the accessory data code  
has been removed, defaced or altered.  
e) The defect or damage was caused by the defective function  
of the cellular system or by inadequate signal reception by the  
external antenna.  
8. If a problem develops during the limited warranty period, the  
Consumer shall take the following step-by-step procedure:  
a) The Consumer shall return the Product to the place of  
purchase for repair or replacement processing.  
b) If “a” is not convenient because of distance (more than 50  
miles) or for other good cause, the Consumer shall ship the  
Product prepaid and insured to:  
Nokia Inc.  
Attn: Repair Department  
795 West Nasa Blvd.  
Melbourne, FL. 32901  
c) The Consumer shall include a return address, daytime phone  
number and/or fax number, complete description of the  
problem, proof of purchase and service agreement (if  
applicable). Expenses related to removing the Product from an  
installation are not covered under this limited warranty.  
d) The Consumer will be billed for any parts or labor charges not  
covered by this limited warranty. The Consumer will be  
responsible for any expenses related to reinstallation of the  
Product.  
e) Nokia will repair or authorize the repair of the Product under  
the limited warranty within 30 days after receipt of the Product  
by Nokia or an Nokia authorized service center. If Nokia cannot  
perform repair covered under this limited warranty within 30  
days, or after a reasonable number of attempts to repair the  
same defect, Nokia at its option, will provide a replacement  
Product or refund the purchase price of the Product less a  
reasonable amount for usage.  
87  
f) If the Product is returned to Nokia during the limited warranty  
period, but the problem with the Product is not covered under  
the terms and conditions of this limited warranty, the Consumer  
will be notified and given an estimate of the charges the  
Consumer must pay to have the Product repaired, with all  
shipping charges billed to the Consumer. If the estimate is  
refused, the Product will be returned freight collect. If the  
Product is returned to Nokia after the expiration of the limited  
warranty period, Nokia's normal service policies shall apply and  
the Consumer will be responsible for all shipping charges.  
9. The Product consists of newly assembled equipment that  
may contain used components that have been reprocessed  
to allow machine compliance with Product performance and  
reliability specifications.  
10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR  
FITNESS FOR A PARTICULAR PURPOSE OR USE, SHALL  
BE LIMITED TO THE DURATION OF THE FOREGOING LIMITED  
WRITTENWARRANTY. OTHERWISE, THE FOREGOING LIMITED  
WARRANTY IS THE CONSUMER'S SOLE AND EXCLUSIVE  
REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES,  
EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR  
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES,  
INCLUDING BUT NOT LIMITED TO, LOSS OF ANTICIPATED  
BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE,  
PUNITIVE DAMAGES, LOSS OF USE OF THE PRODUCT OR  
ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST  
OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWN-  
TIME, THE CLAIMS OF ANY THIRD PARTIES, INCLUDING  
CUSTOMERS, AND INJURY TO PROPERTY, RESULTING  
FROM THE PURCHASE OR USE OF THE PRODUCT OR  
ARISING FROM BREACH OF THE WARRANTY, BREACH OF  
CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER  
LEGAL OR EQUITABLE THEORY, EVEN IF NOKIA KNEW OF  
THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL NOT  
BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE  
LIMITED WARRANTY, OR LOSS OF USE DURING THE  
PERIOD THAT THE PRODUCT IS BEING REPAIRED.  
11. Some states do not allow limitation of how long an implied  
warranty lasts, so the above one-year warranty limitation may  
not apply to you (the Consumer). Some states do not allow the  
exclusion or limitation of incidental and consequential damages,  
so certain of the above limitations or exclusions may not apply  
to you (the Consumer). This limited warranty gives the Consumer  
specific legal rights and the Consumer may also have other  
rights which vary from state to state.  
88  
12. Nokia neither assumes nor authorizes any authorized  
service center or any other person or entity to assume for it any  
other obligation or liability beyond that which is expressly  
provided for in this limited warranty including the provider or  
seller of any extended warranty or service agreement.  
13. This is the entire warranty between Nokia and the  
Consumer, and supersedes all prior and contemporaneous  
agreements or understandings, oral or written, and all  
communications relating to the Product, and no representation,  
promise or condition not contained herein shall modify these  
terms.  
14. This limited warranty allocates the risk of failure of the  
Product between the Consumer and Nokia. The allocation is  
recognized by the Consumer and is reflected in the purchase  
price of the Product.  
15. Any action or lawsuit for breach of warranty must be  
commenced within eighteen (18) months following delivery of  
the Product.  
16. Questions concerning this limited warranty may be directed  
to:  
Nokia Customer Care Center  
Nokia Inc.  
7725 Woodland Center Boulevard, Suite #150  
Tampa, FL 33614  
Telephone: 1-888-NOKIA2U (1-888-665-4228)  
Facsimile: (813) 249-9619  
TTY Users: 1-800-24NOKIA (1-800-246-6542)  
17. The limited warranty period for Nokia supplied attachments  
and accessories is specifically defined within their own warranty  
cards and packaging.  
©Nokia is a registered trademark of Nokia Corporation.  
89  
Call timers 17, 23  
clearing 30  
11. Index  
A
current call timer 32  
life timer 41  
Call waiting  
activating 25  
answering an incoming  
call 25  
ABC mode 16  
Access codes 16  
Accessories 73  
batteries 73  
chargers 75  
Caller groups 26  
graphics 27  
renaming 27  
Alarm clock 16  
Answering a call 8  
Antenna 7  
ringing tones 26  
Caller ID 27  
Automatic answer 17  
Automatic redial 18  
send own number 61  
Calling card  
making calls with 29  
storing in phone 28  
Calls  
B
Batteries  
attaching 3  
available 73  
charging 4  
answering 8  
answering automatically 17  
answering with call  
waiting 25  
conference call 32  
ending 8  
charging times 74  
discharging 5  
removing 3  
standby times 74  
talk times 74  
forwarding 22  
initiating a second 32  
making 8  
muting 44  
silencing incoming 58  
swapping 25  
unmuting 44  
Care and maintenance 84  
Chargers 75  
Charging times 74  
Clear call lists 30  
Clock 31  
displaying/hiding 32  
setting 31  
C
Calculator 18  
currency converter 19  
Calendar 19  
Call forwarding 22  
cancelling 22  
options 22  
Call log  
clear call lists 30  
dialed calls 33  
missed calls 45  
options in call lists 23  
received calls list 54  
Call restrictions see restrict  
calls  
time format 31  
Conference call 32  
90  
Currency converter 19  
Cursor 20  
Customer care 33  
K
Keyguard 9  
Keypad tones 40  
Keys  
D
locking 9  
Dialed calls list 33  
power key 7  
scroll key 11  
soft keys 11  
Dice game 39  
Directory see phone book 49  
E
L
Earpiece volume 34  
Language 41  
Editing names/numbers 50  
Emergency calls 34, 82  
Emergency key 9 feature 35  
Entering letters and  
Last number redial 41  
Letter case 41  
Letters, entering 35  
Life timer 41  
numbers 35  
Lights  
Erasing names/numbers 51  
and Keyguard 10  
in Car profile 42  
Listen to voice messages 42  
Lock code 42  
Locking the keypad see  
Keyguard  
F
Factory settings, restoring 54  
Forwarding calls see call  
forwarding  
Locking your phone 51  
Logic game 38  
G
Game tones 72  
Games  
M
Dice 39  
Logic 38  
Memory 38  
Snake 38  
Making a call 8  
Memory game 38  
Memory status 43  
Menu  
help 13  
H
shortcuts, summary 14  
shortcuts, using 13  
Message alert tone 44  
Message received 39  
Message settings 65  
Messages 43  
Help text 13  
I
Inbox 39, 64  
In-call menu 39  
Microphone 44  
muting and unmuting 44  
Missed calls list 45  
91  
N
R
NAM selection 45  
Names  
Received calls list 54  
Redial  
editing 50  
automatic 18  
erasing 51  
last number 41  
finding 50  
storing 50  
Network feature setting 46  
Network services 47  
Numbers  
editing 50  
entering 35  
erasing 37  
Residential systems see  
system selection  
Restore factory settings 54  
Restrict calls 55  
Ringing options 57  
Ringing tones 58  
Ringing volume 58  
Roaming 59  
finding 50  
S
storing 62  
Safety information 79  
Scroll bar 11  
Scroll key 11  
O
On/off 7  
One-touch dialing 47  
Outbox 49  
Scrolling view 60  
Security code 60  
Send own number 61  
Shortcuts 13  
Signal strength 7, 8  
Snake game 38  
P
Paging 63  
Phone book 49  
available memory 43  
editing entries 50  
erasing entries 51  
finding entries 50  
one-touch dialing  
scrolling view 60  
storing entries 50  
Phone lock 51  
unlocked phone number  
69  
Soft keys 11  
Special characters 37  
Speed dialing see one-  
touch dialing  
Standby times 74  
Start screen 12  
Storing a calling card 28  
Storing names/numbers 50  
System 63  
System selection 63  
Power key 7  
private systems see system  
selection  
T
Talk times 74  
Profiles 53  
Technical data 85  
Public systems see system  
selection  
92  
Text messages  
forwarding 66  
inbox 39  
message settings 65  
reading 66  
receiving 65  
replying to 67  
sending 64  
V
Vibrating alert 69  
Voice mailbox number,  
storing 70  
Voice messages 70  
Voice privacy 71  
Volume  
earpiece 34  
keypad tones 40  
ringing 58  
storage 67  
writing 64  
Tones  
keypad 40  
W
message alert tone 44  
ringing options 57  
ringing tones 58  
ringing volume 58  
warning and game 72  
Touch tones 67  
length 69  
Warning and game tones 72  
Warranty 86  
Welcome note 72  
Write new 72  
manual 43  
U
Unlocked phone number 69  
Unlocking your phone  
Keyguard feature 9  
phone lock feature 52  
Unmuting the microphone 44  
93  
Para obtener un manual del usuario en español favor de  
llamar o enviar un fax al teléfono 1-888-NOKIA2U  
(1-888-665-4228), fax 1-813-249-9619.  
For alternate formats of this owners manual, call our  
Customer Care center at 1-888-665-4228 (NOKIA2U).  
94  

Transcend Information TS2GIFD25 User Manual
Toshiba 200gb 25in Phoenix M2 PX02SMF020 User Manual
Toastmaster ME8TSW User Manual
Sony ICF CD837 User Manual
Samsung SCH 1000 User Manual
Samsung E330 User Manual
Sagem 916 User Manual
Philips CD 740 User Manual
Panasonic CF VCW722 User Manual
Nokia E51 User Manual