Nokia 6086 User Guide
9251039
Issue 1
Nokia operates a policy of continuous development. Nokia reserves the right to make
changes and improvements to any of the products described in this document without prior
notice.
Under no circumstances shall Nokia be responsible for any loss of data or income or any
special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided "as is". Except as required by applicable law, no
warranties of any kind, either express or implied, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose, are made in relation to the
accuracy, reliability or contents of this document. Nokia reserves the right to revise this
document or withdraw it at any time without prior notice.
The availability of particular products may vary by region. Please check with the Nokia dealer
nearest to you.
EXPORT CONTROLS This device may contain commodities, technology, or software subject to
export laws and regulations from the U.S. and other countries. Diversion contrary to law is
prohibited.
9251039/Issue 1
C o n t e n t s
Contents
For your safety.......................... 6
General information................. 9
Access codes............................................ 9
Copyright protection.......................... 10
Configuration settings service ........ 10
Download content and
applications .......................................... 11
Nokia support and contact
information........................................... 11
Edit contact details............................ 48
Groups.................................................... 49
Speed dialing........................................ 49
Service and my numbers................... 50
1. Get started......................... 12
SIM card and battery installation.. 12
Charge the battery.............................. 13
Memory card installation ................. 13
Switch the phone on and off........... 14
Open the fold ....................................... 15
Normal operating position............... 15
Wrist strap ............................................ 16
2. Your phone......................... 17
Keys and parts...................................... 17
Standby mode...................................... 18
Indicators and icons........................... 20
Keypad lock (keyguard) ..................... 21
7. Call log................................ 51
Positioning information.................... 51
3. Call functions..................... 23
Make a call ........................................... 23
Speed dialing........................................ 23
Enhanced voice dialing...................... 23
Answer or reject a call....................... 24
Options during a call.......................... 25
8. Settings............................... 53
Profiles................................................... 53
Themes................................................... 53
Tones....................................................... 54
Display.................................................... 54
Time and date ...................................... 56
My shortcuts ........................................ 56
Connectivity ......................................... 58
Call.......................................................... 67
Phone...................................................... 68
Enhancements ..................................... 70
Configuration....................................... 70
Security.................................................. 71
4. Phone menus...................... 26
Menu views........................................... 26
Access a menu function.................... 26
5. Messaging .......................... 27
Text messages...................................... 27
SIM messages....................................... 30
4
Restore factory settings..................... 72
Phone software updates.................... 72
Access service....................................... 96
9. Operator menu................... 74
10. Gallery.............................. 75
Format memory card.......................... 75
Camera ................................................... 76 Service inbox ..................................... 100
Media player......................................... 77 Cache memory................................... 101
Music player.......................................... 78 Browser security............................... 101
Radio....................................................... 79
16. SIM services .................. 104
Recorder................................................. 81
Equalizer................................................. 82
Stereo widening................................... 82
Nokia PC Suite................................... 105
EGPRS, GPRS, HSCSD, and CSD.... 105
12. Push to talk ..................... 83
Connect and disconnect.................... 83
Data communication applications 106
Make and receive a PTT call ............. 84
Bluetooth............................................ 106
Callback requests................................. 86
Add a one-to-one contact................ 87
PTT channels ......................................... 87
18. Enhancements............... 107
PTT settings ........................................... 88
19. Battery information...... 108
Charging and discharging.............. 108
Nokia battery authentication
13. Organizer.......................... 90
Alarm clock............................................ 90
Calendar................................................. 91
To-do list................................................ 92
Notes....................................................... 92
Calculator .............................................. 92
Timer ....................................................... 93
Stopwatch ............................................. 93
guidelines............................................ 109
Care and maintenance ........ 111
Additional safety
information.......................... 112
Index..................................... 116
14. Applications..................... 94
Games..................................................... 94
Collection............................................... 94
5
F o r y o u r s a f e t y
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should be
road safety.
INTERFERENCE
All wireless phones may be susceptible to interference, which could
affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the phone off near medical
equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in
aircraft.
SWITCH OFF WHEN REFUELING
Do not use the phone at a refueling point. Do not use near fuel or
chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the phone where blasting is in
progress.
USE SENSIBLY
Use only in the normal position as explained in the product
documentation. Do not touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
6
F o r y o u r s a f e t y
WATER-RESISTANCE
Your phone is not water-resistant. Keep it dry.
BACKUP COPIES
Remember to make back-up copies or keep a written record of all
important information stored in your phone.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the phone is switched on and in service. Press the end key as
many times as needed to clear the display and return to the start
screen. Enter the emergency number, then press the call key. Give
your location. Do not end the call until given permission to do so.
■ About your device
The wireless device described in this guide is approved for use on the EGSM 850,
900, 1800, and 1900 networks. Contact your service provider for more
information about networks.
When using the features in this device, obey all laws and respect privacy and
legitimate rights of others, including copyrights.
When taking and using images or video clips, obey all laws and respect local
customs as well as privacy and legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock,
the device must be switched on. Do not switch the device on when
wireless device use may cause interference or danger.
■ Network services
To use the phone you must have service from a wireless service provider. Many of
the features in this device depend on features in the wireless network to
function. These network services may not be available on all networks or you may
have to make specific arrangements with your service provider before you can
utilize network services. Your service provider may need to give you additional
instructions for their use and explain what charges will apply. Some networks
may have limitations that affect how you can use network services. For instance,
some networks may not support all language-dependent characters and services.
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, they will not appear on your device menu. Your
7
F o r y o u r s a f e t y
device may also have been specially configured. This configuration may include
changes in menu names, menu order, and icons. Contact your service provider for
more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP
protocols. Some features of this device, such as MMS, browsing, e-mail
application, instant messaging, remote synchronization, and content
downloading using the browser or MMS, require network support for these
technologies.
■ Shared memory
The following features in this device may share memory: gallery, contacts, text
messages, multimedia messages, instant messages, e-mail, calendar, to-do notes,
and JavaTM games and applications. Use of one or more of these features may
reduce the memory available for the remaining features sharing memory. For
example, saving many Javaapplications may use all of the available memory.
Your device may display a message that the memory is full when you try to use a
shared memory feature. In this case, delete some of the information or entries
stored in the shared memory features before continuing. Some of the features ,
such as text messages, may have a certain amount of memory specially allotted
to them in addition to the memory shared with other features.
■ Enhancements
Check the model number of any charger before use with this device. This device is
intended for use when supplied with power from the AC-3 charger. This device
uses BL-5C batteries.
Warning: Use only batteries, chargers, and enhancements approved by
Nokia for use with this particular model. The use of any other types may
invalidate any approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer.
A few practical rules about accessories and enhancements.
•
•
Keep all accessories and enhancements out of the reach of small children.
When you disconnect the power cord of any accessory or enhancement, grasp
and pull the plug, not the cord.
•
•
Check regularly that enhancements installed in a vehicle are mounted and
are operating properly.
Installation of any complex car enhancements must be made by qualified
personnel only.
8
G e n e r a l i n f o r m a t i o n
General information
Congratulations on your purchase of this Nokia mobile phone. Some of
its other features include a calendar, a clock, an alarm clock, a radio, a
music player, and a built-in camera.
■ Access codes
Security code
The security code (5 to 10 digits) helps to protect your phone against
unauthorized use. The preset code is 12345. To change the code, and to
set the phone to request the code, see “Security,” p. 71.
If you enter an incorrect security code five times in succession, the
phone ignores further entries of the code. Wait for five minutes, and
enter the code again.
PIN codes
The personal identification number (PIN) code and the universal
personal identification number (UPIN) code (four to eight digits) help to
protect your SIM card against unauthorized use. See “Security,” p. 71.
The PIN code is usually supplied with the SIM card. To set the phone to
request the PIN code, see “Security,” p. 71.
The PIN2 code (four to eight digits) may be supplied with the SIM card
and is required for some functions.
The module PIN is required to access the information in the security
module. See “Security module,” p. 101. The module PIN is supplied with
the SIM card if the SIM card has a security module in it.
The signing PIN is required for the digital signature. See “Digital
signature,” p. 103. The signing PIN is supplied with the SIM card if the
SIM card has a security module in it.
9
G e n e r a l i n f o r m a t i o n
PUK codes
The personal unblocking key (PUK) code and the universal personal
unblocking key (UPUK) code (eight digits) is required to change a
blocked PIN code and UPIN code, respectively. The PUK2 code is required
to change a blocked PIN2 code.
If the codes are not supplied with the SIM card, contact your service
provider for the codes.
Barring password
The barring password (four digits) is required when using Call barring
service. See “Security,” p. 71. You can obtain the password from your
service provider.
If you enter an incorrect barring password three times in succession, the
password is blocked. Contact your service provider for assistance.
■ Copyright protection
Copyright protections may prevent some images, music (including ringing tones),
and other content from being copied, modified, transferred or forwarded.
■ Configuration settings service
To use some of the network services, such as mobile internet services,
MMS, or remote internet server synchronization, your phone needs the
correct configuration settings. You may be able to receive the settings
directly as a configuration message. After receiving the settings, you
need to save them on your phone. The service provider may provide a
PIN that is needed to save the settings. For more information on
availability of the settings, contact your service provider.
When you have received a configuration message, Configuration sett.
received is displayed.
To save the settings, select Show > Save. If the phone requests Enter
settings' PIN:, enter the PIN code for the settings, and select OK. To
receive the PIN code, contact the service provider who supplies the
settings. If no settings are saved yet, these settings are saved and set as
10
G e n e r a l i n f o r m a t i o n
default configuration settings. Otherwise, the phone asks, Activate
saved configuration settings?
To discard the received settings, select Show > Discard.
To edit the settings, see “Configuration,” p. 70.
■ Download content and applications
You may be able to download content, such as themes, tones, and video
clips, to the phone (network service). Select the download function (for
example, in the Gallery menu). To access the download function, see the
respective menu descriptions. For availability of different services,
pricing, and tariffs, contact your service provider.
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
■ Nokia support and contact information
Check www.nokia.com/support or your local Nokia web site for the
latest additional information, downloads, and services related to your
Nokia product.
On the web site, you can get information on the use of Nokia products
and services. If you need to contact customer service, check the list of
local Nokia Care contact centers at www.nokia.com/customerservice.
For maintenance services, check your nearest Nokia Care services
location at www.nokia.com/repair.
11
G e t s t a r t e d
1. Get started
■ SIM card and battery installation
Always switch the device off, and disconnect the charger before removing the
battery.
Keep all SIM cards out of the reach of small children.
For availability and information on using SIM card services, contact your SIM
card vendor. This may be the service provider, network operator, or other vendor.
The SIM card and its contacts can easily be damaged by scratches or
bending, so be careful when handling, inserting, or removing the card.
To install the SIM card:
1. Press firmly and slide the top of the back
cover to release it; then remove the back
cover by lifting it from the phone.
2. After you have removed the back cover, insert
your fingernail under the battery, and lift it as
shown.
3. Place a fingernail in the middle of the
metal SIM card holder. Then, unlatch
and swing the SIM card holder open.
4. Insert the SIM card into the holder as
shown, beveled corner first, with the
gold-colored contacts on the SIM card
face up (away from the phone).
5. Swing the SIM card holder closed. The
gold-colored contacts on the SIM card
meet the gold-colored contacts on the inside of the phone. Gently
press the SIM card holder into the phone until it clicks into place.
12
G e t s t a r t e d
6. Replace the battery, by positioning it (with
the label side facing up), so the gold-colored
contacts match up with those on the phone.
Slide the battery in until it snaps into place.
7. Slide the back cover until it locks into place.
■ Charge the battery
1. Connect the charger to a standard
wall outlet.
2. Insert the charger plug into the
round jack in the bottom of the
phone. If the battery is completely
discharged, it may take a few minutes before the charging indicator
appears on the display or before any calls can be made.
3. Disconnect the charger from the phone when the battery is fully
charged.
You can use the phone while the charger is connected. The charging
time depends on the charger and the battery used. For example,
charging a BL-5C battery with the AC-3 charger takes approximately 2
hours and 20 minutes while the phone is in the standby mode.
■ Memory card installation
Use only compatible microSD cards approved by Nokia
for use with this device. Nokia uses approved industry
standards for memory cards, but some brands may not be
fully compatible with this device. Incompatible cards
may damage the card and the device and corrupt data
stored on the card..
You can use a memory card to extend the memory
of the Gallery. See “Gallery,” p. 75. You can insert or change the memory
card without turning the phone off.
13
G e t s t a r t e d
Important: Do not remove the memory card in the middle of an
operation when the card is being accessed. Removing the card in the
middle of an operation may damage the memory card as well as the
device, and data stored on the card may be corrupted.
To insert a memory card, use a fingernail
as a lever, place it in the recessed area of
the memory card holder and swing the
holder open (1). Place the memory card in
the card holder (2). Make sure that the
memory card is properly inserted and that
the gold-colored contacts on the card are
facing upwards. Close the memory card
holder (3).
You can use the memory card to save your
multimedia files, such as video clips, sound files, and images, in the
Gallery.
To remove the memory card, use a finger nail as a lever. Place it in the
recessed area of the memory card holder and swing the holder open.
Push gently with a finger nail against the card to loosen it from the
holder; pull the card out. Close the memory card holder.
To format the memory card, see “Format memory card,” p. 75.
■ Switch the phone on and off
Press and hold the end key until
the phone switches on or off. If the
phone asks for a PIN, enter the
code, and select OK.
Plug and play service
When you turn on your phone for the first time, and the phone is in the
standby mode, you may be asked to get the configuration settings from
your service provider (network service). Confirm or reject the query. See
14
G e t s t a r t e d
Connect to service provider support in “Configuration,” p. 70 and
“Configuration settings service,” p. 10.
■ Open the fold
When you open the fold of the
phone, it opens up to
approximately 155 degrees.
Do not try to force the fold
open more.
■ Normal operating position
Use the phone only in its normal
operating position.
Your device has an internal antenna.
15
G e t s t a r t e d
Note: As with any other radio transmitting device, do not touch the
antenna unnecessarily when the device is switched on. Contact with
the antenna affects call quality and may cause the device to operate at
a higher power level than otherwise needed. Avoiding contact with the
antenna area when operating the device optimizes the antenna
performance and the battery life.
■ Wrist strap
Remove the back cover from
the phone and thread a strap
as shown in the picture.
16
Y o u r p h o n e
2. Your phone
■ Keys and parts
• Earpiece (1)
• Main display (2)
• Left, middle, and right selection keys (3)
• Four-way navigation key (4)
• Call key (5)
• End key (6)
• Keypad (7)
• Camera lens (8)
• Mini display (9)
• Memory card holder (10)
• Loudspeaker (11)
• Microphone (12)
• Pop-Port connectorTM (13)
• Charger connector (14)
• Camera release key (15)
• Volume key and push to talk
key (16)
17
Y o u r p h o n e
■ Standby mode
When you turn on your phone, the first
screen that appears is the start screen,
which indicates your phone is in the
standby mode. When your phone is in the
standby mode, the selection keys access
specific functions, and the indicators
appear on the start screen. Indicators show
the status of the phone.
• Network signal strength (1)
• Battery strength indicator (2)
• Clock (3) — if the time is set to appear on
the display. See “Time and date,” in
“Settings,” p. 56.
• The name of the service provider or the operator logo (4)
• Calendar (5) — the date is displayed if it is set to appear on the
display and the active standby is not set. See “Active standby mode,”
p. 19 and “Time and date,” p. 56.
• Active standby (6). See “Active standby mode,” on p. 19.
• The left selection key (7) is Go to or a shortcut to another function.
See “Left selection key,” p. 56.
• The middle selection key (8) mode is Menu.
• The right selection key (9) may be Names to access the list of
contacts in the Contacts menu, an operator specific name to access
an operator specific web site, or a shortcut to a function that you
selected. See “Right selection key,” p. 57.
18
Y o u r p h o n e
Active standby mode
In the active standby mode, the phone
can display separate content item
windows, such as general indicators
and operator logo (1), shortcuts (2),
audio functions (3), and the calendar
(4). To select whether the active
standby is shown, see Active standby in
“Standby mode settings,” p. 54.
The active standby is in passive mode
when the middle selection key (5) is
Menu; you can only view content. To
activate the navigation mode and scroll
through the content, use the navigation
key. To change the key for accessing the
navigation mode, see Active standby key in “Standby mode settings,”
p. 54. When the arrow indicators are shown, you can scroll the item left
and right.
To personalize and organize the active standby content, select Options
and select a corresponding option. See “Standby mode settings,” p. 54.
To exit the navigation mode, select Exit. If no keys are pressed after a
certain period of time, the phone automatically returns to the passive
mode.
Content items in navigation mode
Shortcut bar — To select a shortcut, scroll to the function you want and
select it. To change or organize the shortcuts when in the navigation
mode, select Options > Personalise.
Radio and Music — To turn on the radio or the music player, scroll to and
select it. To change a track in the music player, scroll down or up. To
start the radio channel search, scroll and hold left or right.
Calendar — To view today’s notes, select the one you want. To view the
notes for the previous or next days, scroll left or right.
My note — To enter a note, select the content window, write your note,
and save it.
19
Y o u r p h o n e
Countdown timer — To start the countdown timer, select the content
item. The remaining time with a note is shown.
General indicators — To show standby indicators, such as date, cell info
display, info messages, PTT default group name, and closed user group
index. The date is shown if the calendar is not selected as active standby
content.
Standby mode shortcuts
To access the list of dialed numbers, press the call key once. See “Make a
call,” p. 23.
To call your voice mailbox (network service) when you have saved your
voice mailbox number in the phone, press and hold 1.
To connect to a browser service, press and hold 0.
To set shortcut functions for the navigation key, see Navigation key in
“My shortcuts,” p. 56.
To make a call by pressing a number key with an assigned phone
number, see “Speed dialing,” p. 23.
To toggle between the General profile and the Silent profile, press and
hold #.
■ Indicators and icons
Your phone has two types of identifiers: indicators and icons.
Indicators
See “Standby mode,” p. 18 for information on indicators.
Icons
Icons are graphical representations of a specific item or situation. The
following list describes each icon.
You have unread messages in the Inbox folder.
You have unsent, canceled, or failed messages in the Outbox
folder.
20
Y o u r p h o n e
The phone registered a missed call.
You have received one or several instant messages, and you are
connected to the instant messaging service.
The keypad is locked.
The alarm clock is set to On.
The phone does not ring for an incoming call or text message.
The countdown timer is running.
The stopwatch is running in the background.
The phone is registered to the GPRS or EGPRS network.
A GPRS or EGPRS connection is established.
/
/
/
The GPRS or EGPRS connection is suspended (on hold), for
example, if there is an incoming or outgoing call during an
EGPRS or GPRS dial-up connection.
A Bluetooth connection is active.
If you have two phone lines, the second phone line is selected.
All incoming calls are diverted to another number.
The loudspeaker is activated, or the music stand is connected to
the phone.
Calls are limited to a closed user group.
The timed profile is selected.
Calls are routed over a wireless local network (WLAN)/ wireless
fidelity (Wi-Fi). See “WLAN/Wi-Fi,” p. 58.
■ Keypad lock (keyguard)
The keyguard disables your keypad to prevent accidental key presses.
• To lock the keypad, select Menu, and press * within 3.5 seconds.
• To unlock the keypad, select Unlock, and press * within 1.5 seconds.
21
Y o u r p h o n e
• To enable automatic keyguard, select Menu >Settings > Phone >
Automatic keyguard > On. Set the delay in minutes and seconds in
which the keypad locks.
If the Security keyguard is set to On, enter the security code if requested.
To answer a call when the keyguard is on, press the call key. When you
end or reject the call, the keypad is automatically locked.
When the keyguard is on, calls still may be possible to the official
emergency number programmed into your device. Enter the emergency
number and press the call key.
For information about Security keyguard, see “Phone,” p. 68.
22
C a l l f u n c t i o n s
3. Call functions
■ Make a call
1. Enter the phone number, including the area code. To delete an
incorrect character, select Clear.
For international calls, press * twice for the international prefix (the
+ character replaces the international access code); and then enter
the country code, the area code without the leading 0, if necessary,
and the phone number.
2. To call the number, press the call key.
3. To end the call or to cancel the call attempt, press the end key, or
select Options > End call.
■ Speed dialing
number by one of the following ways:
• Press a speed dialing key, and then press the call key.
• If Speed dialling is set to On, press and hold a speed dialing key until
the call is started. See Speed dialling in “Call,” p. 67.
■ Enhanced voice dialing
You can make a phone call by saying the name that is saved in the
contact list of the phone. A voice command is added automatically to all
entries in the contact list of the phone.
Make a voice dialing call
If an application is sending or receiving data using a packet data
connection, end the application before you use voice dialing.
Voice commands are language-dependent. To set the language, see
Voice recognition language in “Phone,” p. 68.
23
C a l l f u n c t i o n s
Note: Using voice tags may be difficult in a noisy environment or during
an emergency, so you should not rely solely upon voice dialing in all
circumstances.
1. In the standby mode, press and hold the right selection key. A short
tone is played, and Speak now is displayed.
If you are using a compatible headset with the headset key, press and
hold the headset key to start the voice dialing.
2. Say the voice command clearly. If the voice recognition is successful,
a list with matches is shown. The phone plays the voice command of
the match on the top of the list. After about 1.5 seconds, the phone
dials the number; or if the result is not the correct one, scroll to
another entry, and select to dial the entry.
Using voice commands to carry out a selected phone function is
similar to voice dialing. See Voice commands in “My shortcuts,”
p. 56.
■ Answer or reject a call
Open the fold, or press the call key to answer the call. To mute the
ringing tone, select Silence, if the fold is open or if the fold is closed,
press the volume up or down key.
To reject an incoming call when the fold is open, press the end key.
If Divert if busy is activated in your voice mailbox, the call is forwarded
to your voice mail. If not, the call is rejected. If a compatible headset
supplied with the headset key is connected to the phone, press the
headset key to answer and end a call.
Call waiting
Call waiting is a network service. To answer the waiting call during an
active call, press the call key. The first call is put on hold. To end the
active call, press the end key.
To activate the Call waiting function, see “Call,” p. 67.
24
C a l l f u n c t i o n s
■ Options during a call
Many of the options that you can use during a call are network services.
For availability, contact your service provider.
To increase or decrease the volume during a call, press the volume up or
down key on the side of the phone.
Select Options during a call and the following options may be available.
Send DTMF — to send tone strings
Swap — to switch between the active call and the call on hold
Transfer — to connect a call on hold to an active call and disconnect
yourself
Conference — to make a conference call that allows up to five persons to
take part in a conference call
Private call — to discuss privately in a conference call
Do not hold the device near your ear when the loudspeaker is in use,
because the volume may be extremely loud.
25
P h o n e m e n u s
4. Phone menus
Phone features are grouped according to function and are accessed
through the main menus of your phone. Each main menu contains
submenus and lists from which you can select or view items and
personalize phone features. Scroll to access these menus and submenus.
Some menus may not be available, depending on your network. For more
information, contact your service provider.
■ Menu views
Your phone may have two types of menu views: List and Grid.
In the List interface, images introduce every menu. Scroll to navigate
through the menus. As you scroll through the menus, the menu number
appears in the upper right corner of the display. Below the menu number
is a scroll bar with a tab. The tab moves up or down as you scroll through
the menus, providing a visual representation of your current position in
the menu structure.
In the Grid interface, multiple menu icons appear on a single display.
Use the four-way navigation key to scroll through the icons. The name
of the menu appears at the top of the display and the icon for the
selected menu is outlined.
To change the menu view, select Menu >Options > Main menu view >
List or Grid.
■ Access a menu function
1. Select Menu and the menu you want.
2. If the menu contains submenus, select the one that you want.
3. If the selected menu contains further submenus, select the one that
you want
4. To return to the previous menu level, select Back. To exit the menu,
select Exit.
26
M e s s a g i n g
5. Messaging
You can use mobile messages to keep in touch with
friends, family, and business associates by using the short message
service (SMS), which is a network service. Not all messaging features are
available in all wireless networks. Contact your service provider for
availability and subscription information.
When sending messages, your phone may display the words Message
sent. This is an indication that the message has been sent by your device
to the message center number programmed into your device. This is not
an indication that the message has been received at the intended
destination. For more details about messaging services, check with your
service provider.
■ Text messages
Your device supports the sending of text messages beyond the character limit for
a single message. Longer messages are sent as a series of two or more messages.
Your service provider may charge accordingly. Characters that use accents or
other marks, and characters from some language options like Chinese, take up
more space limiting the number of characters that can be sent in a single
message.
You can use predefined templates to help you write text messages.
Before you can send any text or e-mail messages, you need to configure
the message settings. See “Message settings,” p. 43.
To check SMS e-mail service availability and to subscribe to the service,
contact your service provider.
Text entry
To enter text while writing messages, use traditional or predictive text
input. When using traditional text input, press a number key, 1 to 9,
repeatedly until the character you want is displayed. In predictive text
input you can enter a letter with a single keypress.
27
M e s s a g i n g
When you write text,
appears at the top left of the display,
indicating predictive text input, and
traditional text input. , or
is displayed, indicating
is displayed next to the text
,
input indicator, indicating the character case. To change the character
case, press #. indicates number mode. To change from the letter to
number mode, press and hold #, and select Number mode.
Settings
To set the writing language to a language other than that selected,
select Options > Writing language. Predictive text input is only
available for the languages on the list.
To set the predictive text input option, select Options > Prediction on ,
or to set traditional text input option, select Options > Prediction off.
To quickly set predictive text input on or off when writing text, press #
twice, or select and hold Options.
Predictive text input
Predictive text input allows you to write text quickly by using the phone
keypad and a built-in dictionary.
1. Start writing a word, using the keys, 2 to 9, and press each key only
once for one letter. The word changes after each keystroke.
2. When you finish writing the word and it is correct, press 0.
3. If a displayed word is not correct, press * repeatedly, or select
Options > Matches. When the word that you want is displayed,
select Use.
4. If the ? character is displayed after the word, the word you intended
to write is not in the dictionary. To add the word to the dictionary,
select Spell. The phone displays the entered letters. Enter the word
(traditional text input is used), and select Save.
Traditional text input
Press a number key, 1 to 9, repeatedly until the character you want is
displayed. Not all characters available under a number key are printed
on the key. The characters available depend on the selected writing
language. See “Settings,” p. 28.
28
M e s s a g i n g
If the next letter you want is located on the same key as the present one,
wait until the cursor is displayed, or scroll and enter the letter.
To access the most common punctuation marks and special characters,
press 1. To insert a space, press 0.
If you want more characters, press *.
Write and send
1. Select Menu > Messaging > Create message > Text message and
enter the recipient’s phone number in the To: field.
2. To retrieve a phone number from Contacts, select Add > Contact. To
send the message to multiple recipients, add the contacts you want
one by one.
3. To send the message to persons in a group, select Contact group and
the group you want. To retrieve the contacts to which you recently
sent messages, select Add > Recently used.
4. Scroll down and enter a message. See “Text entry,” p. 27.
5. To insert a template to the text message, select Options > Use
template and the template you want to insert.
6. To see how the message will look to the recipient, select Options >
Preview.
7. To send the message, select Send.
Read and reply
When you receive messages, either 1 message received or N messages
received is displayed, where N is the number of new messages.
1. To view a new message, select Show. To view it later, select Exit.
To read the message later, select Menu > Messaging > Inbox. If more
than one message has been received, select the message that you
want to read.
indicates an unread message in Inbox.
2. While reading a message, select Options, and delete or forward the
message, edit the message as a text message or an SMS e-mail or
move it to another folder, or view or extract message details. You can
29
M e s s a g i n g
also copy text from the beginning of the message to your phone
calendar as a reminder note.
3. To reply to a message, select Reply > Text message, Multimedia,
Flash message, or Audio message.
To send a text message to an e-mail address, enter the e-mail
address in the To: field.
4. Scroll down and enter a message in the Message: field. See “Text
entry,” p. 27. If you want to change the message type for your reply
message, select Options > Change msg. type.
5. To send the message, select Send.
■ SIM messages
SIM messages are text messages that are saved to your SIM card. You
can copy or move those messages to the phone memory, but not vice
versa. Received messages are saved to the phone memory.
To read SIM messages, select Menu > Messaging > Options > SIM
messages.
■ Multimedia messages
Note: Only devices that have compatible features can receive and
display multimedia messages. The appearance of a message may vary
depending on the receiving device.
A multimedia message can contain text, sound, a picture, a calendar
note, a business card, or a video clip. If the message is too large, the
phone may not be able to receive it. Some networks allow text messages
that include an internet address where you can view the multimedia
message.
You cannot receive multimedia messages during a call or an active
browsing session over GSM data. Because delivery of multimedia
messages can fail for various reasons, do not rely solely upon them for
essential communications.
30
M e s s a g i n g
Write and send a multimedia message
The wireless network may limit the size of MMS messages. If the inserted picture
exceeds this limit, the device may make it smaller so that it can be sent by MMS.
To set the settings for multimedia messaging, see “Multimedia,” p. 45.
To check availability and to subscribe to the MMS, contact your service
provider.
1. Select Menu > Messaging > Create message > Multimedia.
2. Enter a message. See “Text entry,” p. 27.
Your phone supports multimedia messages that contain several
pages (slides). A message can contain a calendar note and a business
card as attachments. A slide can contain text, one image, and one
sound clip; or text and a video clip.
3. To insert a slide in the message, select New; or select Options >
Insert > Slide.
4. To view the message before sending it, select Options > Preview.
6. Enter the recipient’s phone number in the To: field.
To retrieve a phone number from Contacts, select Add > Contact.
To send the message to multiple recipients, add the contacts you
want one by one.
To send the message to persons in a group, select Contact group and
the group you want.
To retrieve the contacts to which you recently sent messages, select
Add > Recently used.
Message sending
When you finish writing your message, to send the message, select
Send, or press the call key. The phone saves the message in the Outbox
folder, and sending starts. If you select Save sent messages > Yes, the
sent message is saved in the Sent items folder. See “General settings,”
p. 43.
31
M e s s a g i n g
When the phone is sending the message, the animated
is shown.
Actual receipt of a message depends on a number of factors. For more
details about messaging services, check with your service provider.
It takes more time to send a multimedia message than to send a text
message. While the message is being sent, you can use other functions
on the phone. If an interruption occurs while the message is being sent,
the phone tries to resend the message a few times. If these attempts fail,
the message remains in the Outbox folder. You can try to resend it later.
To cancel the sending of the messages in the Outbox folder, scroll to the
desired message, and select Options > Cancel sending.
Read and reply
Important: Exercise caution when opening messages. Multimedia
message objects may contain malicious software or otherwise be
harmful to your device or PC.
When you receive multimedia messages, either Multimedia message
received or N messages received is displayed, where N is the number of
new messages.
1. To read the message, select Show. To view it later, select Exit.
To read the message later, select Menu > Messaging > Inbox. In the
list of messages,
indicates an unread message. Select the
message that you want to view.
2. To view the whole message if the received message contains a
presentation, select Play.
To view the files in the presentation or the attachments, select
Options > Objects or Attachments.
3. To reply to the message, select Options > Reply > Text message,
Multimedia, Flash message, or Audio message. Write the reply
message.
If you want to change the message type for your reply message,
select Options > Change msg. type. The new message type may not
support all the content that you have added.
4. To send the message, select Send. See “Message sending,” p. 31.
32
M e s s a g i n g
Memory full
When you are receiving a message, and the memory for the messages is
full, Memory full. Unable to receive msgs. is shown. To delete old
messages, select OK > Yes and the folder. Scroll to the message you
want, and select Delete.
If you want to delete more than one message at the same time, scroll to
one of the messages you want to delete and select Options > Mark.
Scroll to each additional message you want to delete and select Mark or
if you want to delete all the messages, select Options > Mark all. When
you have finished marking the messages you want to delete, select
Options > Delete marked.
Folders
The phone saves received text and multimedia messages in the Inbox
folder.
To set the phone to save the sent messages in the Sent items folder, see
Save sent messages in “General settings,” p. 43.
To see any message you want to send later and have saved as a draft in
the Drafts folder, select Menu > Messaging > Drafts.
You can move your messages to the Saved items folder. To organize your
Saved items subfolders, select Menu > Messaging > Saved items >
Saved messages or a folder you added. To add a new folder for your
messages, select Options > Add folder. To delete or rename a folder,
scroll to the folder you want, and select Options > Delete folder or
Rename folder.
Your phone has templates. To create a new template, save, or copy a
message as a template. To access the template list, select Menu >
Messaging > Saved items > Templates.
Flash messages
Flash messages are text messages that are instantly displayed upon
reception. Flash messages are not automatically saved.
33
M e s s a g i n g
Write a flash message
Select Menu > Messaging > Create message > Flash message. Enter the
recipient’s phone number in the To: field. Write your message in the
Message: field. The maximum length of a flash message is 70 characters.
To send the message, select Send.
Receive a flash message
A received flash message is indicated with Message:, followed by a few
words from the beginning of the message. To read the message, select
Read. To extract phone numbers, e-mail addresses, and web site
addresses from the current message, select Options > Use detail.
■ Nokia Xpress audio messaging
You can use the multimedia message service to create and send voice
messages conveniently. Multimedia messaging service must be
activated before you can use audio messages.
Create an audio message
1. Select Menu > Messaging > Create message > Audio message, and
to start recording.
2. To stop recording, select
and a message screen is displayed.
3. To view the available options, select Options.
4. Enter the recipient’s phone number in the To: field.
To retrieve a phone number from Contacts, select Add > Contact.
To send the message to multiple recipients, add the contacts you
want one at a time.
To send the message to persons in a group, select Contact group and
the group you want.
To retrieve the contacts to which you recently sent messages, select
Add > Recently used.
5. To send the message, select Send.
34
M e s s a g i n g
Receive an audio message
When your phone receives audio messages, either 1 audio message
received, or N messages received is displayed, where N is the number of
new messages. To open the message, select Play; or if more than one
message is received, select Show > Play. To listen to the message later,
select Exit. Select Options to see the available options.
■ Instant messaging
You can take text messaging to the next level by experiencing IM
(network service) in a wireless environment. You can engage in IM with
friends and family, regardless of the mobile system or platform (like the
internet) they are using, as long as you all use the same IM service.
Before you can start using IM, you must first subscribe to your wireless
service provider’s text messaging service and register with the IM
service you want to use. You must also obtain a user name and password
before you can use IM. See “Register with an IM service,” p. 35 for more
information.
Note that depending on both your IM service provider and your wireless
service provider, you may not have access to all of the features
described in this guide.
To set the required settings for the IM service, see Connect. settings in
“Access,” p. 36. The icons and texts on the display may vary, depending
on the IM service.
While you are connected to the IM service, you can use the other
functions of the phone, and the IM conversation remains active in the
background. Depending on the network, the active IM conversation may
consume the phone battery faster, and you may need to connect the
phone to a charger.
Register with an IM service
You can do this by registering over the internet with the IM service
provider you have selected to use. During the registration process, you
will have the opportunity to create the user name and password of your
35
M e s s a g i n g
choice. For more information about signing up for IM services, contact
your wireless service provider.
Access
To access the Instant messages menu while still offline, select Menu >
Messaging > Instant messages (Instant messages may be replaced by
another term depending on the service provider). If more than one set of
connection settings for IM service is available, select the one you want.
If there is only one set defined, it is selected automatically.
The following options are shown:
Login — to connect to the IM service. To set the phone to automatically
connect to the IM service when you switch on the phone; in the login
session, scroll to Automatic login: and select Change >On, or select
Menu > Messaging > Instant messages, connect to the IM service, and
select Options > Settings > Automatic login > On or Off.
Saved convers. — to view, erase, or rename the conversations that you
saved during an IM session
Connect. settings — to edit the settings needed for messaging
connection
Connect
To connect to the IM service, access the Instant messages menu, select
the IM service, if needed, and select Login. When the phone has
successfully connected, Logged in is displayed.
To disconnect from the IM service, select Options > Logout.
Sessions
When connected to the IM service your status as seen by others is
shown in a status line: Status: Online, My status: Busy or Status: App. off.
— to change own status, select Change
Below the status line there are three folders containing your contacts
and showing their status: Convers., Online and Offline. To expand the
36
M e s s a g i n g
folder highlight it and select Expand (or press scroll right), to collapse
the folder select Collapse (or press scroll left).
Conversations — shows the list of new and read instant messages or
invitations to IM during the active IM session
indicates a new group message.
indicates a read group message.
indicates a new instant message.
indicates a read instant message.
indicates an invitation.
The icons and texts on the display may vary, depending on the IM service
you have selected.
Online — shows the number of contacts that are online
Offline — shows the number of contacts that are offline
To start a conversation, expand the Online or the Offline folder and
scroll to the contact with whom you would like to chat and select Chat.
To answer an invitation or to reply to a message expand the
Conversations folder and scroll to the contact to whom you would like
to chat and select Open. To add contacts, see “Add IM contacts,” p. 38.
Options > Search IM users — to search for other instant messaging users
on the network by mobile phone number, alias, e-mail address, first
name or last name.
Options > Chat — to start the conversation when you have found the
user that you want.
Accept or reject an invitation
In the standby mode, when you are connected to the IM service and you
receive a new invitation, New invitation received is displayed. To read it,
select Read. If more than one invitation is received, scroll to the
invitation you want, and select Open. To join the private group
conversation, select Accept, and enter the screen name you want to use
as your nickname. To reject or delete the invitation, select Options >
Reject or Delete.
37
M e s s a g i n g
Read an instant message
In the standby mode, when you are connected to the IM service, and you
receive a new message that is not a message associated with an active
conversation, New instant message is displayed.To read it, select Read.
If you receive more than one message, N new instant messages appears
in the display, where N is the number of new messages. Select Read,
scroll to a message, and select Open.
New messages received during an active conversation are held in
Instant messages > Conversations. If you receive a message from
someone who is not in IM contacts, the sender ID is displayed. To save a
new contact that is not in the phone memory, select Options > Save
contact.
Participate in a conversation
To participate in a conversation, write your message; and select Send, or
press the call key. Select Options to view the available options.
If you receive a new message during a conversation from a person who
is not taking part in the current conversation,
phone sounds an alert tone.
is displayed, and the
Write your message; and select Send, or press the call key. Your message
is displayed, and the reply message is displayed below your message.
Add IM contacts
When connected to the IM service, in the IM main menu select
Options > Add contact.
Select By mobile number, Enter ID manually, Search from serv., or Copy
from server (depending on service provider). When the contact is
successfully added, the phone confirms it.
Scroll to a contact. To start a conversation, select Chat.
Block or unblock messages
When you are in a conversation and want to block messages, select
Options > Block contact. A confirmation query is shown, select OK to
block messages from this contact.
38
M e s s a g i n g
To block messages from a specific contact in your contacts list, scroll to
the contact in Conversations, Online or Offline and select Options >
Block contact > OK.
To unblock a contact, in the IM main menu select Options > Blocked list.
Scroll to the contact you want to unblock and select Unblock > OK.
Groups
You can create your own private groups for an IM conversation. The
private groups exist only during an IM conversation.
Connect to the IM service, and from the main menu select Options >
Create group. Enter the name for the group and the screen name that
you want to use as your nickname. Mark the private group members in
the contacts list, and write an invitation.
■ E-mail application
The e-mail application uses a packet data connection (network service)
are not in the office or at home. This e-mail application is different from
the SMS e-mail function. To use the e-mail function on your phone, you
need a compatible e-mail system.
You can write, send, and read e-mail with your phone. You can also save
and delete the e-mail on a compatible PC. Your phone supports POP3
and IMAP4 e-mail servers.
Before you can send and retrieve any e-mail messages, you must do the
following:
• Obtain a new e-mail account or use your current account. To check
the availability of your e-mail account, contact your e-mail service
provider.
• Check your e-mail settings with your network operator or e-mail
service provider. You may receive the e-mail configuration settings
as a configuration message. See “Configuration settings service,”
p. 10. You can also enter the settings manually. See “Configuration,”
p. 70.
39
M e s s a g i n g
To edit the e-mail settings, select Menu > Messaging > E-mail >
Options > Manage accounts.
This application does not support keypad tones.
Settings wizard
The settings wizard will start automatically if no e-mail settings are
defined in the phone. To enter the settings manually, select Menu >
Messaging > E-mail > Options > Manage accounts > Options > New.
e-mail settings. Make sure that you have defined the correct preferred
access point for your operator. See “Configuration,” p. 70.
The e-mail application requires an internet access point without a
proxy. WAP access points normally include a proxy and do not work with
the e-mail application.
Write and send an e-mail
You can write your e-mail message before connecting to the e-mail
service; or connect to the service first, then write and send your e-mail.
1. Select Menu > Messaging > E-mail > Write new e-mail.
2. If more than one e-mail account is defined, select the account from
which you want to send the e-mail.
3. Enter the recipient’s e-mail address.
4. Write a subject for the e-mail.
5. Enter the e-mail message. See “Text entry,” p. 27.
To attach a file to the e-mail, select Options > Attach file and a file
from Gallery.
6. To send the e-mail message immediately, select Send > Send now.
To save the e-mail in the Outbox folder to be sent later, select
Send > Send later.
To edit or continue writing your e-mail later, select Options > Save
as draft. The e-mail is saved in Outboxes > Drafts.
40
M e s s a g i n g
To send the saved e-mail from the outbox, select Menu >
Messaging > E-mail > Options > Send e-mail or Send/check e-mail.
Download e-mail
1. To download e-mail messages that have been sent to your e-mail
account, select Menu > Messaging > E-mail > Check new e-mail.
If more than one e-mail account is defined, select the account from
which you want to download the e-mail.
The e-mail application only downloads e-mail headers at first.
2. Select Back.
3. Select Inboxes, the account name, the new message, and Retrieve to
download the complete e-mail message.
To download new e-mail messages and to send e-mail that has been
saved in the Outbox folder, select Options > Send/check e-mail.
Read and reply to e-mail
Important: Exercise caution when opening messages. E-mail
messages may contain malicious software or otherwise be harmful to
your device or PC.
1. Select Menu > Messaging > E-mail > Inboxes, the account name,
and the desired message.
2. While reading the message, select Options to view the available
options.
3. To reply to an e-mail, select Reply > Original text or Empty message.
To reply to many, select Options > Reply to all. Confirm or edit the
e-mail address and subject, then write your reply.
4. To send the message, select Send > Send now.
E-mail folders
Your phone saves e-mail that you have downloaded from your e-mail
account in the Inboxes folder. The Inboxes folder contains the following
folders: “Account name” for incoming e-mail, Archive for archiving
e-mail, Custom 1—Custom 3 for sorting e-mail, and Junk where all spam
41
M e s s a g i n g
e-mail is stored. The Outboxes folder contains the following folders:
Drafts for saving unfinished e-mail, Outbox for saving e-mail that has
not been sent, and Sent items for saving e-mail that has been sent.
To manage the folders and their e-mail content, select Options to view
the available options of each folder.
Spam filter
The e-mail application allows you to activate a built-in spam filter. To
activate and define this filter, select Options > Spam filter > Settings in
the main e-mail idle screen. The spam filter allows the user to put
specific senders on a black or white list. Black list messages are filtered
to the Junk folder. Unknown and White list messages are downloaded
into the account inbox. To blacklist a sender, select the e-mail message
in the Inboxes folder and Options > Blacklist sender.
■ Voice messages
If you subscribe to voice mail (network service), your service provider
will furnish you with a voice mailbox number. You need to save this
number to your phone to use voice mail. When you receive a voice
message, your phone lets you know by beeping, displaying a message, or
both. If you receive more than one message, your phone shows the
number of messages received.
To call your voice mailbox, select Menu > Messaging > Voice
messages > Listen to voice messages. To enter, search for, or edit your
voice mailbox number, select Voice mailbox number.
If supported by the network,
indicates new voice messages. Select
Listen to call your voice mailbox number.
■ Info messages
With the Info messages network service, you can receive short text
messages from your service provider. To check availability, topics, and
the relevant topic numbers, contact your service provider.
42
M e s s a g i n g
■ Service commands
Use the Service commands editor to enter and send service requests
(also known as USSD commands) to your service provider. Contact your
service provider for information about specific service commands.
Select Menu > Messaging > Service commands.
■ Delete messages
To delete messages one by one, select Menu > Messaging > Delete
messages > By message and the folder from which you want to delete
messages. Scroll to the message you want to delete, and select Delete.
If you want to delete more than one message at the same time, scroll to
one of the messages you want to delete, and select Options > Mark.
Scroll to each additional message you want to delete, and select Mark
or if you want to delete all the messages, select Options > Mark all.
When you have finished marking the messages you want to delete,
select Options > Delete marked.
To delete all messages from a folder, select Menu > Messaging > Delete
messages > By folder and the folder from which you want to delete the
messages. Depending on the folder, the phone asks if you want to delete
the messages. To delete, select Yes. Otherwise, if the folder contains
unread messages or messages which are waiting to be sent, the phone
asks whether you want to keep them. To keep these messages, select
Yes.
To delete all messages from all folders, select Menu > Messaging >
Delete messages > All messages > Yes.
■ Message settings
General settings
General settings are common for text and multimedia messages.
Select Menu > Messaging > Message settings > General settings and
one of the following options:
43
M e s s a g i n g
Save sent messages > Yes — to set the phone to save the sent messages
in the Sent items folder
Overwriting in Sent items — to select if overwriting takes place when
messages are sent and the message memory is full
Font size — to select the font size used in messages
Graphical smileys > Yes — to set the phone to replace character-based
smileys with graphical ones
Text messages
The text message settings affect the sending, receiving, and viewing of
text and SMS e-mail messages.
Select Menu > Messaging > Message settings > Text messages and one
of the following options:
Delivery reports — to select whether the network sends delivery reports
about your messages (network service)
Message centres > Add centre — to set the phone number and name of
the message center that is required for sending text messages. You
receive this number from your service provider. If you select SIM msg.
centre, you can view the SIM message center information.
Message centre in use — to select the message center in use
E-mail message centres > Add centre — to set the phone numbers and
name of the e-mail center for sending SMS e-mails. If you select SIM
e-mail cntr., you can view the SIM e-mail center information.
E-mail centre in use — to select the SMS e-mail message center in use
Message validity — to select the length of time for which the network
attempts to deliver your message
Messages sent via > Text > Paging, or Fax— to select the format of the
messages to be sent (network service).
Use packet data > Yes — to set GPRS as the preferred SMS bearer
Character support > Full — to select all characters in the messages to be
sent as viewed. If you select Reduced, characters with accents and other
marks may be converted to other characters. When writing a message,
44
M e s s a g i n g
you can check how the message will look to the recipient by previewing
the message. See “Write and send,” p. 29.
Reply via same centre > Yes — to allow the recipient of your message to
send you a reply using your message center (network service)
Multimedia
The multimedia message settings affect the sending, receiving, and
viewing of multimedia messages and audio messages.
You may receive the configuration settings for multimedia messaging as
a configuration message. See “Configuration settings service,” p. 10.
You can also enter the settings manually. See “Configuration,” p. 70.
Select Menu > Messaging > Message settings > Multimedia msgs. and
one of the following options:
Delivery reports > Yes — to ask the network to send delivery reports
about your messages (network service)
Image size (multimedia) — to define the default image size used in
multimedia messages
Default slide timing — to define the default time between slides in
multimedia messages
Allow multimedia reception > Yes or No — to receive or block the
multimedia message. If you select In home network, you cannot receive
multimedia messages when outside your home network. The default
setting of the multimedia message service is generally In home network.
Incoming multimedia messages — to allow the reception of multimedia
messages automatically, manually after being prompted, or to reject the
reception. This setting is not shown if Allow multimedia reception is set
to No.
Allow adverts — to receive or reject advertisements. This setting is not
shown if Allow multimedia reception is set to No, or Incoming multi-
media messages is set to Reject.
Configuration settings > Configuration — only the configurations that
support multimedia messaging are shown. Select a service provider,
45
M e s s a g i n g
Default, or Personal config. for multimedia messaging. Select Account
and a MMS account contained in the active configuration settings.
E-mail messages
The settings affect the sending, receiving, and viewing of e-mail. You
may receive the settings as a configuration message. See “Configuration
settings service,” p. 10. You can also enter the settings manually. See
“Configuration,” p. 70.
Select Menu > Messaging > Message settings > E-mail messages and
from the following options:
Configuration — to select the set that you want to activate
Account — to select an account provided by the service provider
My name — to enter your name or nickname
E-mail address — to enter your e-mail address
Incoming server type — to select the incoming e-mail server type
Login information — to enter information according to the server type
Incoming mail settings — to select the maximum number of mails that
shall be retrieved
Outgoing mail settings (SMTP) — to enter SMTP (simple mail transfer
protocol) information and setting options used when sending e-mail
Display terminal window > Yes — to perform manual user
authentication for intranet connections
46
C o n t a c t s
6. Contacts
In Contacts, you can store and manage contact information,
such as names, phone numbers, and addresses. You can save names and
numbers in the internal memory of the phone, the SIM card memory, or
in a combination of the two. Names and numbers saved in the SIM card
memory, are indicated by
.
■ Search
Select Menu > Contacts > Names and scroll through the list of contacts
or enter the first letter of the name you are trying to find.
■ Save names and phone numbers
Names and numbers are saved in the used memory. Select Menu >
Contacts > Names > Options > Add new contact and enter the last
name, first name, and the phone number.
■ Save numbers, items, or an image
In the phone memory for contacts, you can save different types of phone
numbers and short text items per name. You can also assign a ringing
tone to a contact.
The first number you save is automatically set as the default number,
and it is indicated with a frame around the number type indicator (for
example,
). When you select a name, the default number is used
unless you select another number.
1. Make sure that the memory in use is either Phone or Phone and SIM.
2. Scroll to the name to which you want to add a new number or text
item, and select Details > Options > Add detail.
3. To add a number, select Number and one of the number types.
4. To add another detail, select a text type, an image from the Gallery,
or a new image.
47
C o n t a c t s
5. To change the number type, scroll to the number you want, and
select Options > Change type. To set the selected number as the
default number, select Set as default.
6. Enter the number or text item; to save it, select Save.
7. To return to the standby mode, select Back > Exit.
■ Copy a contact
Search for the contact you want to copy, and select Options > Copy
contact. You can copy names and phone numbers from the phone
contact memory to the SIM card memory, or vice versa. The SIM card
memory can save names with one phone number attached to them.
■ Edit contact details
1. Search for the contact you want to edit, select Details; and scroll to
the name, number, text item, or image you want.
2. To edit a name, number, or text item, or to change image, select
Options > Edit.
You cannot edit an ID when it is on the IM contacts or the Subscribed
names list.
■ Delete contacts or details
To delete all the contacts and the details attached to them from the
phone or SIM card memory, select Menu > Contacts > Delete all
contacts > From phone mem. or From SIM card. Confirm with the
security code.
To delete a contact, search for the contact you want, and select
Options > Delete contact.
To delete a number, text item, or an image attached to the contact,
search for the contact, and select Details. Scroll to the desired detail,
and select Options > Delete > Delete number, Delete detail, or Delete
image. Deleting an image from contacts does not delete it from the
Gallery.
48
C o n t a c t s
■ Business cards
You can send and receive a person’s contact information from a
compatible device that supports the vCard standard as a business card.
To send a business card, search for the contact whose information you
want to send, and select Details > Options > Send bus. card > Via
multimedia, Via text message, or Via Bluetooth.
When you have received a business card, select Show > Save to save the
business card in the phone memory. To discard the business card, select
Exit > Yes.
■ Settings
Select Menu > Contacts > Settings and one of the following options:
Memory in use — to select the SIM card or phone memory for your
contacts. Select Phone and SIM to recall names and number from both
memories. In that case, when you save names and numbers, they are
saved in the phone memory.
Contacts view — to select how the names and numbers in Contacts are
displayed
Name display — to select whether the contact’s first or last name is
displayed first
Font size — to set the font size for the list of contacts
Memory status — to view the free and used memory capacity
■ Groups
Select Menu > Contacts > Groups to arrange the names and phone
numbers saved in the memory into caller groups with a different ringing
tone and a group image.
■ Speed dialing
To assign a number to a speed dialing key, select Menu > Contacts >
Speed dials, and scroll to the speed dialing number that you want.
49
C o n t a c t s
Select Assign, or if a number has already been assigned to the key,
select Options > Change. Select Search and the contact you want to
assign. If the Speed dialling function is off, the phone asks whether you
want to activate it.
To make a call using speed dialing, see “Speed dialing,” p. 23.
■ Service and my numbers
Select Menu > Contacts and one of the following options:
Service numbers — to call the service numbers of your service provider if
the numbers are included on your SIM card (network service)
My numbers — to view the phone numbers assigned to your SIM card.
This is only shown if the numbers are included on your SIM card.
50
C a l l l o g
7. Call log
The phone registers the phone numbers of identified
missed, received, and dialed calls, and the approximate length of your
calls. The phone registers missed and received calls only if the network
supports these functions, and the phone is turned on and within the
network’s service area.
To view the information on your calls, select Menu > Log > Missed calls,
Received calls, or Dialled numbers. To view your recent missed and
received calls and the dialed numbers chronologically, select Call log. To
view the contacts to whom you most recently sent messages, select
Message recipients.
To view the approximate information on your recent communications,
select Menu > Log > Call duration, Packet data counter, or Packet data
conn. timer.
To view how many text and multimedia messages you have sent and
received, select Menu > Log > Message log.
Note: The actual invoice for calls and services from your service
provider may vary, depending on network features, rounding off for
billing, taxes, and so forth.
Some timers, including the life timer, may be reset during service or
software upgrades.
■ Positioning information
The network may send you a location request. You can ensure that the
network will deliver location information of your phone only if you
approve it (network service). Contact your service provider to subscribe
and to agree upon the delivery of location information. Some networks
allow you to request the position of the phone (network service).
To accept or reject the location request, select Accept or Reject. If you
miss the request, the phone automatically accepts or rejects it
according to what you have agreed with your service provider. The
51
C a l l l o g
phone displays 1 missed position request. To view the missed location
request, select Show.
To view the information on the 10 most recent privacy notifications and
requests or to delete them, select Menu > Log > Positioning > Position
log > Open folder or Delete all.
52
S e t t i n g s
8. Settings
Use this menu to set or change your profiles, themes,
personal shortcuts, time and date settings, connectivity settings, call
settings, phone settings, main display settings, mini display settings,
tone settings, enhancement settings, configuration settings, security
settings, and to restore factory settings.
■ Profiles
Your phone has various setting groups, called profiles, for which you can
personalize the phone tones for different events and environments.
Select Menu > Settings > Profiles and a profile.
• To activate the selected profile, select Activate.
you want to change: then, make the changes.
• To set the profile to be active until a certain time (up to 24 hours),
select Timed and set the time you want the profile setting to end.
When the time set for the profile expires, the previous profile (that
was not timed) becomes active.
■ Themes
You can change the look of your phone display by activating a theme. A
theme can include a wallpaper image, a ringing tone, a screen saver, and
a color scheme. Themes are stored in the Gallery.
Select Menu > Settings > Themes and one of the following options:
Select theme — to set a theme in your phone. A list of folders in the
Gallery opens. Open the Themes folder, and select a theme.
Theme downloads — to open a list of links to download more themes.
See “Download settings,” p. 100.
53
S e t t i n g s
■ Tones
You can change the settings of the selected active profile.
Select Menu > Settings > Tones. and edit the available settings. You can
find the same settings when you personalize a profile in the Profiles
menu. See “Profiles,” p. 53.
To set the phone to ring only upon calls from phone numbers that
belong to a selected caller group, select Alert for:. Scroll to the caller
group you want or All calls, and select Mark.
■ Display
With display settings, you can personalize your display view of the
phone.
Main display
You can select display settings for the start screen (main display).
Standby mode settings
Select Menu > Settings > Main display and one of the following
options:
Wallpaper — to display a background picture (wallpaper) on the start
screen. Select Wallpapers and from the following:
Image
Slide set and an image or a slide from the Gallery
Open Camera
To download more graphics, select Graphic downloads.
Select Active standby — to display the active standby. Select one of the
following options:
•
•
Personalise view — to change the content and to reorganize the
content on the display Options > Move content.
Active standby key — to change the key for accessing the navigation
mode. The same setting is also in the My shortcuts menu. See
“Enabling active standby,” p. 57.
54
S e t t i n g s
Standby mode font colour — to select the color for the texts on the
display in the standby mode
Navigation key icons — to set the scroll key icons that are shown in the
standby mode
Fold animation — to select whether an animation is shown when you
open and close the fold. The fold animation is only visible if it is
supported by and selected from the active theme set in your phone. See
“Themes,” on p. 53.
Operator logo — to set your phone to display or hide the operator logo.
Cell info display > On — to receive information from the network
operator depending on the network cell used (network service).
Screen saver
To select a screen saver, select Menu > Settings > Main display >
Screen saver > Screen savers > Image, Slide set, Open Camera, Video
clip, Analogue clock or Digital clock. To download more screen savers,
select Graphic downloads. To enter the time after which the screen saver
is activated, select Time-out. To activate the screen saver, select On.
Font size
This feature allows you to select the font size for Messaging, Contacts
and Web. Select Menu > Settings > Main display > Font size and one of
the following:
Messaging — to select the font size you want to use for messages. Select
Extra small font, Normal font, or Large font.
Contacts — to select the font size you want to display your contacts’
names. Select Normal font or Large font.
Web — to select the font size you want to display for mobile internet
pages. Select Extra small font, Small font or Large font.
Mini display
You can select display settings for the mini display on the front of your
phone.
55
S e t t i n g s
Screen saver
Select Menu > Settings > Mini display > Screen saver > Analogue clock
or Digital clock . To enter the time after which the screen saver is
activated, select Time-out. To activate the screen saver, select On.
■ Time and date
Select Menu > Settings > Time and date and one of the following
options:
Time — to set the phone to show or hide the clock in the standby mode,
adjust the time, and select the time zone and the time format
Date — to set the phone to show or hide the date in the standby mode,
set the date, and select the date format and date separator
Auto-update of date & time (network service) — to set the phone to
automatically update the time and date to the appropriate time zone
■ My shortcuts
You can set your most frequently used functions to be quickly accessed
through the My shortcuts feature.
Left selection key
To select a function from the list for the left selection key, select
Menu > Settings > My shortcuts > Left selection key. See also “Standby
mode,” p. 18.
To activate a function in the standby mode if the left selection key is Go
to, select Go to and the function you want on your personal shortcut
list.
Select Options and from the following options:
Select options — to add a function to the shortcut list, or to remove one.
Scroll to the function, and select Mark or Unmark.
Organise — to rearrange the functions on your personal shortcut list.
Scroll to the function you want to move, and select Move. Scroll to
where you want to move the function, and select OK. Repeat this
56
S e t t i n g s
process, if you want to move another function. When you have
completed rearranging the functions you want, select Done > Yes.
Right selection key
To set a specific function (from a predefined list) to the right selection
key, select Menu > Settings > My shortcuts > Right selection key. This
function can be used only if it is supported by your service provider.
Navigation key
This key allows you to scroll up, down, left, and right. To assign other
phone functions (from a predefined list) to the navigation key, select
Menu > Settings > My shortcuts > Navigation key. Scroll to the key you
want, select Change and a function from the list. To remove a shortcut
function from the key, select (empty). To reassign a function for the key,
select Assign.
Enabling active standby
This function allows you to select how the active standby mode is
activated. Select Menu > Settings > My shortcuts > Active standby
key > Navigation key up, Navigat. key down, or Nav. key up/down.
Voice commands
You can call contacts and carry out phone functions by saying voice
commands. Voice commands are language-dependent. To set the
language, see Voice recognition language in “Phone,” p. 68.
To select the phone functions to activate with a voice command, select
Menu > Settings > My shortcuts > Voice commands and a folder. Scroll
to a function you want.
indicates that the voice tag is activated. To
deactivate the voice command, select Options > Remove. To activate
the voice tag, select Add. To play the activated voice command, select
Playback. To use voice commands, see “Enhanced voice dialing,” p. 23.
To manage the voice commands, scroll to a phone function, and select
from the following options:
57
S e t t i n g s
Edit or Remove — to change or deactivate the voice command of the
selected function
Remove all — to deactivate voice commands to all functions in the voice
commands list
■ Connectivity
You can connect the phone to compatible devices, using Bluetooth
wireless technology or USB data cable (CA-53) connection. You can also
define the settings for EGPRS or GPRS dial-up connections.
WLAN/Wi-Fi
Important: Always enable one of the available encryption methods to
increase the security of your wireless LAN connection. Using encryption
reduces the risk of unauthorized access to your data.
Some places, like France, have restrictions on the use of wireless LAN. Check with
your local authorities for more information.
Your device supports voice calls over the internet (internet calls). Your device
attempts emergency calls primarily over cellular networks. If an emergency call
using cellular networks is not successful, your device attempts an emergency call
through your net call provider. Due to the established nature of cellular
telephony, you should use cellular networks for emergency calls, if possible. If
you have cellular network coverage available, make sure that your cellular phone
is switched on and ready to make calls before you attempt an emergency call. The
capability for an emergency call using internet telephony depends on the
availability of a WLAN network and your net call provider's implementation of
emergency call capabilities. Contact your net call provider to check the internet
telephony emergency call capability.
This device can detect and connect to a wireless local area network
(WLAN) through call over local access. This unlicensed mobile access
(UMA) technology allows a seamless handoff of mobile voice and data
from a wide area cellular network to WLAN or wireless fidelity (Wi-Fi),
so it is possible to connect at a high speed to the internet from virtually
anywhere.
Before you can start using UMA, you must first obtain a UMA account
with your service provider. Since this device was specially designed to
58
S e t t i n g s
detect and connect to WLAN/Wi-Fi, the proper settings may already be
configured in your phone. For more information, contact your service
provider.
If you move the device to another location within the wireless LAN and
out of range of a WLAN/Wi-Fi access point, the roaming function can
automatically connect your device to another access point that belongs
to the same network. During a call you will hear a beeping sound when
you go in and out of range of the WLAN/Wifi access point and connect
to the cellular network. As long as you remain within range of access
points that belong to the same network, your device can stay connected
to the network.
A WLAN/Wi-Fi connection is established when you create a data
connection using a WLAN/Wi-Fi access point. The active WLAN/Wi-Fi
connection is ended when you end the data connection.
Features using WLAN/Wi-Fi or allowing such features to run in the
background while using other features, increase the demand on battery
power and reduce the battery life.
Tutorial
To see the tutorial any time you want, select Menu > Applications >
Collection > Tutorial. To exit the tutorial at any time, select Exit.
Turn on WLAN/Wi-Fi
Select Menu > Settings > Connectivity > Wi-Fi > Wi-Fi radio > On.
Quick connection
Quick connection allows you to connect to an open network with the
best signal strength.
1. From the standby mode, select Go to > Quick connect or from the
Wi-Fi menu, select Quick connect.
2. If you have not connected to WLAN/Wi-Fi first, a message asks if you
want to turn on WLAN/Wi-Fi first. Select Yes.
3. If you are already connected to another network, a message asks if
you want to disconnect from that network. Select Yes.
59
S e t t i n g s
The phone searches for networks and when the network with the best
signal strength is found, a message confirming network connection is
displayed. If you have not saved the network, a message asks if you want
to save it. Select Yes or No if you want to save the network or not. If no
available networks can be found, No quick connect networks available is
displayed.
Available networks
The list of available networks shows all the available networks to which
you can connect.
indicates that a network is connected and
indicates that a network is saved.
A network may be hidden and can only be found by searching for its
service set identifier (SSID), which is a code attached to all packets on a
wireless network to identify each packet as part of that network. All
wireless devices attempting to communicate with each other must
share the same SSID.
1. Select Menu > Settings > Connectivity > Wi-Fi > Available
networks.
2. If you have not connected to WLAN/Wi-Fi first, a message asks if you
want to turn on WLAN/Wi-Fi first. Select Yes.
The phone searches for available networks and when the networks
are found, they are listed in signal strength order.
3. Scroll to the network you want and select Connect.
A message confirming network connection is displayed. If you have
not saved the network, a message asks if you want to save it.
4. Select Yes to save the network or No to not save the network.
5. To save an available network to which you have not connected,
select Options > Save.
6. To update the list of available networks, select Options > Refresh. If
the list of available networks is empty, select Refresh.
7. To locate a hidden network, select Options > Hidden networks, enter
the SSID of the network you want to find, and select OK.
8. To disconnect from the network, select Disconn.
60
S e t t i n g s
Saved networks
The list of saved networks consists of all the networks you have saved.
The name of the network and the connection setting is displayed. The
networks are listed in order of priority and the network with the highest
priority is automatically the first one where a connection attempt is
made.
1. Select Menu > Settings > Connectivity > Wi-Fi > Saved networks.
2. Scroll to the network you want, and select Connect.
3. If you have not connected to WLAN/Wi-Fi first, a message asks if you
want to turn on WLAN/Wi-Fi first. Select Yes.
A message confirming network connection is displayed.
4. To rename a saved network, scroll to the network you want, and
select Options > Rename. Select Clear as many times as necessary to
delete the network name, enter the new network name, and select
OK.
5. To forward the settings of a saved network, scroll to the network you
want, select Options > Forward settings, enter the security code
(preset code is 12345), and select OK. Enter a phone number and
select Send.
6. To change the priority of a saved network, select Options > Organise
priority, scroll to the network you want, and select Move > Move up,
Move down, Move to top or Move to bottom > Done > Yes.
Each saved network has its individual connection settings, which offer
different ways to connect to the network. Scroll to the network you
want, and select Options > Conn. settings and one of the following
options:
Ask first — to be asked to be connected to a network when it becomes
available
Automatic — to be connected to the network automatically
Manual — to be connected to the network only when done manually
Other options for saved networks are edit a saved network’s settings,
delete a saved network, or add a new network.
61
S e t t i n g s
Add to saved networks
You can also add a network to the saved networks list from the Wi-Fi
menu. You can either manually enter a network, which must have a
valid SSID, or select from the available networks.
To save from available networks, do the following:
1. To save a network from the available networks, select Available
networks.
2. If you have not connected to WLAN/Wi-Fi first, a message asks if you
want to turn on WLAN/Wi-Fi first. Select Yes.
The phone searches for available networks and when the networks
are found, they are listed in signal strength order.
3. Scroll to the network you want, and select Options > Save.
4. Select Clear as many times as necessary to delete the network name,
and enter the new network name.
5. Select OK.
Turn off WLAN/Wi-Fi while connected
Select Menu > Settings > Connectivity > Wi-Fi > Wi-Fi radio > Off >
Yes.
Wi-Fi call settings
Configuration — to select which UMA configuration to use.
Account — to select which UMA account to use.
Connection failure
You may not be able to connect to the network at times. Try connecting
to the network later, as this may be only a temporary error. If the
connection still fails, contact your service provider.
Login failure
If you attempt to login to a network without a UMA subscription,
Contact your service provider is displayed.
62
S e t t i n g s
Bluetooth wireless technology
This device is compliant with Bluetooth Specification 2.0 supporting the
following profiles: hands-free, headset, network access, object push profile, file
transfer profile, dial-up networking profile, SIM access profile, serial port profile,
service discovery application profile, personal area network profile, advanced
audio distribution profile and audio video remote control profile. To ensure
interoperability between other devices supporting Bluetooth technology, use
Nokia approved enhancements for this model. Check with the manufacturers of
other devices to determine their compatibility with this device.
There may be restrictions on using Bluetooth technology in some locations.
Check with your local authorities or service provider.
Features that use Bluetooth technology, or allow such features to run in the
background while using other features, increase the demand on battery power
and reduce the battery life.
Bluetooth technology allows you to connect the phone to a compatible
Bluetooth device within 10 meters (33 feet). Since devices using
Bluetooth technology communicate using radio waves, your phone and
the other devices do not need to be in direct line of sight, although the
connection can be subject to interference from obstructions, such as
walls or from other electronic devices.
To set up a Bluetooth connection, do the following:
1. Select Menu > Settings > Connectivity > Bluetooth.
2. To activate or deactivate the Bluetooth function, select Bluetooth >
On or Off.
indicates an active Bluetooth connection.
3. To search for compatible Bluetooth audio devices, select Search for
audio enhancements and the device that you want to connect to the
phone.
To search for any Bluetooth device in range, select Paired devices.
Select New to list any Bluetooth device in range. Scroll to a device,
and select Pair.
4. Enter the Bluetooth passcode of the device to associate (pair) the
device to your phone. You must only give this passcode when you
connect to the device for the first time. Your phone connects to the
device, and you can start data transfer.
63
S e t t i n g s
Settings
To define how your phone is shown to other Bluetooth devices, select
Menu > Settings > Connectivity > Bluetooth > My phone's visibility or
My phone's name.
Operating the phone in hidden mode is a safer way to avoid malicious software.
Do not accept Bluetooth connectivity from sources you do not trust.
Turn off the Bluetooth function as another alternative. This will not affect other
functions of the phone.
Connection
Select Menu > Settings > Connectivity > Bluetooth. To check which
Bluetooth connection is currently active, select Active devices. To view a
list of Bluetooth devices that are currently paired with the phone, select
Paired devices.
Select Options to access available options, depending on the status of
the device and the Bluetooth connection.
Packet data
General packet radio service (GPRS) is a network service that allows
mobile phones to send and receive data over an internet protocol (IP)
based network. GPRS is a data bearer that enables wireless access to
data networks such as the internet.
Enhanced GPRS (EGPRS) is similar to GPRS but enables faster
connections. For more information on availability of EGPRS or GPRS and
data transfer speed, contact your network operator or service provider.
The applications that may use EGPRS or GPRS are MMS, video
streaming, browsing sessions, e-mail, remote SyncML, Java application
downloading, and the PC dial-up.
When you have selected GPRS as a data bearer, the phone uses EGPRS
instead of GPRS, if this is available in the network. You cannot select
between EGPRS and GPRS, but for some applications you may be able to
select GPRS or GSM data (circuit-switched data, CSD).
64
S e t t i n g s
To define how to use the service, select Menu > Settings >
Connectivity > Packet data > Packet data connection and one of the
following options:
When needed — to set the packet data registration and connection to
established when an application using packet data needs it and closed
when you end the application
Always online — to set the phone to automatically register to an packet
data network when you switch the phone on. or indicates that the
GPRS or EGPRS service is available.
If you receive a call or a text message, or make a call during a GPRS or
EGPRS connection,
or indicates that the GPRS or EGPRS
connection is suspended (on hold).
Packet data settings
You can connect the phone using Bluetooth wireless technology or USB
data cable connection to a compatible PC and use the phone as a
modem to enable EGPRS or GPRS connectivity from the PC.
To define the settings for EGPRS or GPRS connections from your PC,
select Menu > Settings > Connectivity > Packet data > Packet data
settings > Active access point, and activate the access point you want to
use. Select Edit active access point > Alias for access point, enter a name
to change the access point settings, and select OK. Select Packet data
access point, enter the access point name (APN) to establish a
connection to an EGPRS or GPRS network, and select OK.
You can also set the EGPRS or GPRS dial-up service settings (access
point name) on your PC, by using the One Touch Access software. See
“Nokia PC Suite,” p. 105. If you have set the settings both on your PC
and on your phone, the PC settings are used.
Data transfer and synchronization
Synchronize your data from calendar, notes, and contacts with another
compatible device (for example, a mobile phone), a compatible PC, or a
remote internet server (network service).
Your phone allows data transfer with a compatible PC or another
compatible device when using the phone without a SIM card. Note that
65
S e t t i n g s
when you use the phone without a SIM card, some functions appear
dimmed in the menus and cannot be used. To synchronize with a remote
internet server is not possible without a SIM card.
To copy or synchronize data from your phone, the name of the device
and the settings must be in the list of partners in transfer contacts. If
you receive data from another compatible device, the partner is
automatically added to the list, using the contact data from the other
device. Server sync and PC sync settings are the original items in the list.
To add a new partner to the list, such as a new device, select Menu >
Settings > Connectivity > Data transfer > Options > Add contact >
Phone sync or Phone copy, and enter the settings according to the
transfer type.
To edit the copy and synchronize settings, select a contact from the
partner list, and select Options > Edit.
To delete a selected partner, select Options > Delete> OK. You cannot
delete Server sync and Phone sync.
Data transfer with a compatible device
For synchronization, Bluetooth wireless technology is used. The other
device is in the standby mode.
To start a data transfer, select Menu > Settings > Connectivity > Data
transfer and the transfer partner from the list other than Server sync
and PC sync. Based on the settings, the selected data is copied or
synchronized. The other device also must be activated to receive data.
Synchronize from a compatible PC
To synchronize data from calendar, notes, and contacts from a
compatible PC, use Bluetooth wireless technology or a USB data cable
(CA-53). You also need the correct version of Nokia PC Suite software
for your phone installed on the PC. See “Computer connectivity,” p. 105
for information about Nokia PC Suite.
Synchronize the data in the phone contacts, calendar, and notes to
correspond with the data of your compatible PC by starting the
synchronization from the PC.
66
S e t t i n g s
Synchronize from a server
To use a remote internet server, you have to subscribe to a
synchronization service. For more information and the settings required
for this service, contact your service provider. You may receive the
settings as a configuration message. See “Configuration settings
service,” p. 10 and “Configuration,” p. 70.
If you have saved data on the remote internet server, you can
synchronize your phone by starting the synchronization from your
phone.
Select Menu > Settings > Connectivity > Data transfer > Server sync >
Initialising sync or Initialising copy.
If the contacts or calendar are full, synchronizing may take up to
30 minutes to complete, when synchronizing for the first time, or after
an interrupted synchronization.
USB data cable
You can use the USB data cable to transfer data between the memory
card inserted in the phone and a compatible PC or a printer supporting
PictBridge. You can also use the USB data cable with Nokia PC Suite.
To activate the memory card for data transfer or picture printing,
connect the data cable; when the phone displays USB data cable
connected. Select mode., select OK and one of the following options:
Nokia mode — to use the cable for Nokia PC Suite
Printing & media — to print pictures directly from the phone by using a
compatible printer
Data storage — to activate the memory card for data transfer
To change the USB mode, select Menu > Settings > Connectivity > USB
data cable > Nokia mode, Printing, or Data storage.
■ Call
Select Menu > Settings > Call and one of following options:
67
S e t t i n g s
Call divert — to forward your incoming calls (network service). Call
barring service in “Security,” p. 71.
Anykey answer > On — to answer an incoming call by briefly pressing
any key, except the left and right selection keys, volume key, camera key,
or the end key
Answer when fold is opened > On — to set your phone to answer a call
when you open the fold. If the setting is off, you must press the call key
after you open the fold.
Automatic redial > On — to set your phone to make a maximum of 10
attempts to connect the call after an unsuccessful call attempt
Speed dialling > On and the names and phone numbers assigned to the
speed dialing keys, 2 to 9. To dial, press and hold the corresponding
number key.
Call waiting > Activate — to set the network to notify you of an
incoming call while you have a call in progress (network service). See
“Call waiting,” p. 24.
Summary after call > On — to briefly display the approximate duration
of the call after each call
Send my caller ID > Yes — to show your phone number to the person you
are calling (network service). To use the setting agreed upon with your
service provider, select Set by network.
■ Phone
Select Menu > Settings > Phone and one of the following options:
Language settings > Phone language — to set the display language of
your phone. If you select Automatic, the phone selects the language
according to the information on the SIM card.
• To select the USIM card language, select SIM language.
• To set a language for the voice playback, select Voice recognition
language. See “Make a voice dialing call,” p. 23 and Voice commands
in “My shortcuts,” p. 56.
68
S e t t i n g s
Memory status — to view the free memory and the used memory for
each function in the list
Security keyguard — to set the phone to ask for the security code when
you unlock the keyguard. Enter the security code, and select On. When
the keyguard is on, calls still may be possible to the official emergency
number programmed into your device.
Automatic keyguard — to set the keypad to lock automatically. Choose
On and the time-out to activate the keyguard, or Off to set the
automatic keyguard off.
Flight query — to set the phone to ask if Flight mode should be used each
time the phone is turned on. In Flight mode, all radio connections are
turned off. Flight mode should be used in areas sensitive to radio
emissions.
Welcome note — to create the welcome note you would like to be shown
briefly when the phone is turned on
Phone updates — to view the current phone software version, to
download new phone software and, to install downloaded phone
software. See “Phone software updates,” p. 72.
Operator selection > Automatic — to set the phone automatically to
select one of the cellular networks available in your area. With Manual,
you can select a network that has a roaming agreement with your
service provider.
Confirm SIM service actions. This option is shown only if supported by
your SIM card. See “SIM services,” p. 104.
Help text activation — to select whether the phone shows help texts
Start-up tone — to select whether the phone plays a start-up tone when
the phone is turned on
Switch off tone — to select whether the phone plays a switch off tone
when the phone is turned off. This menu is only visible if the tone exists
in Themes or is part of the power-down function of your service
provider.
69
S e t t i n g s
Fold close handling — to select whether closing the fold causes the
phone to go to the standby mode or to keep all running applications
open.
■ Enhancements
This menu is shown only if the phone is or has been connected to a
compatible mobile enhancement, other than the charger.
Select Menu > Settings > Enhancements. You can select an
enhancement menu if the corresponding enhancement is or has been
connected to the phone. Depending on the enhancement, select from
one of the following options:
Default profile — to select the profile that you want to be automatically
activated when you connect to the selected enhancement
Automatic answer — to set the phone to answer an incoming call
automatically after 5 seconds. If Incoming call alert is set to Beep once
or Off, automatic answer is off.
lights on for 15 seconds after a keypress
Ignition detector > On — to automatically switch off the phone
approximately 20 seconds after you switch off the car ignition, when
the phone is connected to the full car kit
Text phone > Use text phone > Yes — to use text phone settings instead
of headset settings
■ Configuration
You can configure your phone with settings that are required for certain
services to function correctly. The services are multimedia messaging,
instant messaging, synchronization, e-mail application, streaming, push
to talk, and browser. Your service provider may also send you these
settings as a configuration message.
To save the configuration settings received as a configuration message,
see “Configuration settings service,” p. 10.
70
S e t t i n g s
Select Menu > Settings > Configuration and one of the following
options:
Default configuration settings — to view the service providers saved in
the phone. Scroll to a service provider, and select Details to view the
applications that the configuration settings of this service provider
supports. To set the configuration settings of the service provider as
default settings, select Options > Set as default. To delete configuration
settings, select Delete.
Activate default in all applications — to activate the default
configuration settings for supported applications
Preferred access point — to view the saved access points. Scroll to an
access point, and select Options > Details to view the name of the
service provider, data bearer, and packet data access point or GSM
dial-up number.
Connect to service provider support — to download the configuration
settings from your service provider, if this is supported by your service
provider
Personal configuration settings — to add new personal accounts for
various services manually, and to activate or delete them. To add a new
personal account if you have not added any, select Add new; otherwise,
select Options > Add new. Select the service type, and enter each of the
required parameters. The parameters differ according to the selected
service type. To delete or activate a personal account, scroll to it, and
select Options > Delete or Activate.
■ Security
When security features that restrict calls are in use (such as call barring,
closed user group, and fixed dialing) calls still may be possible to the
official emergency number programmed into your device.
Select Menu > Settings > Security and one of the following options:
PIN code request — to set the phone to ask for your PIN or UPIN code
every time the phone is switched on. Some SIM cards do not allow the
code request to be turned off.
71
S e t t i n g s
Call barring service — to restrict incoming calls to and outgoing calls
from your phone (network service). A password is required.
Fixed dialling — to restrict your outgoing calls to selected phone
numbers, if this function is supported by your SIM card
Closed user group — to specify a group of people whom you can call and
who can call you (network service)
Security level > Phone — The phone asks for the security code whenever
a new SIM card is inserted into the phone. Select Memory and the phone
asks for the security code when the SIM card’s memory is selected and
you want to change the memory in use.
Access codes — to set the PIN code or UPIN code in use, or to change the
security code, PIN code, UPIN code, PIN2 code, and call barring
password
Code in use — to select whether the PIN code or UPIN code should be
active
Authority certificates or User certificates — to view the list of the
authority or user certificates downloaded into your phone. See
“Certificates,” p. 102.
Security module settings — to view Security module details, activate
Module PIN request, or change the module PIN and signing PIN. See also
“Access codes,” p. 9.
■ Restore factory settings
To reset some of the menu settings to their original values, select
Menu > Settings > Restore factory sett., and enter the security code.
Data that you have entered or downloaded is not deleted. For example,
names and numbers in Contacts are not affected.
■ Phone software updates
You may initiate phone software updates from the Phone updates menu.
Also, your service provider may initiate the updates by sending them
over the air directly to your device. This function is known as firmware
over the air (FOTA).
72
S e t t i n g s
Warning: If you install a software update, you cannot use the
device, even to make emergency calls, until the update is
completed and the device is restarted. Be sure to back up data
before accepting a FOTA update.
Download
Select Menu > Settings > Phone > Phone updates to request available
phone software updates from your service provider. Select Current
software details to display the current software version. Select
Download phone software to download and install a phone software
update (if an update is available). Follow the instructions on the display.
Important: Only install and use applications and other software from
sources that offer adequate security and protection against harmful
software.
Install
Select Install software update to start the installation, if you cancelled
the installation after the download.
The software update may take several minutes.
Note: If there are problems with the download or installation,
contact your service provider.
73
G a l l e r y
10. Gallery
In this menu, you can manage graphics, images, recordings,
and tones. These files are arranged in folders.
Your phone supports an activation key system to protect acquired
content. Always check the delivery terms of any content and activation
key before acquiring them, as they may be subject to a fee.
The files stored in the Gallery use the memory capacity of the phone.
You can use a compatible memory card to extend the memory capacity
to store images, themes, graphics, ringing tones, video clips, and sound
clips in the Gallery.
To manage the files and folders, do the following:
1. Select Menu > Gallery. A list of folders is shown. If a memory card is
inserted in the phone, the folder Memory card, (unformat.), or the
name of the memory card is shown.
2. Scroll to the folder you want. To view a list of files in the folder,
select Open. For the available options, select Options.
3. Scroll to the file you want to view, and select Open. For the available
options, select Options.
■ Format memory card
To format a new memory card, select Menu > Gallery. Scroll to the
memory card folder, and select Options > Format mem. card.
75
M e d i a
11. Media
■ Camera
You can take photos or record video clips with the built-in camera. The
camera lens is on the front of the phone. The color display works as a
viewfinder.
Take a photo
1. Select Menu > Media > Camera > Capture; or press the camera key,
and select Capture.
The phone saves the photo in Gallery > Images, unless you set the
phone to use the memory card to save photos.
2. To take another photo, select Back.
3. To zoom in or out, press the four-way navigation key up or down.
4. To take up to five photos in quick succession, select Options > Img.
sequence on > Sequen. To take another photo, select Options > New
image.
The higher the resolution, the fewer photos you can take
sequentially.
5. To send the photo as a multimedia message, select Send.
6. To set a timer to delay capturing a photo for 10 seconds, select
Options > Self-timer on > Start.
A beep sounds while the self-timer is running, and beeps faster when
the camera is about to capture the photo. After the timeout, the
camera takes the photo and saves the photo in Gallery > Images.
To take a photo when the lighting is dim, the camera automatically
adjusts a longer exposure time so the photo quality is better.
This Nokia device supports an image capture resolution up to 640x480
pixels. The image resolution in these materials may appear different.
76
M e d i a
Record a video clip
Select Menu > Media > Camera > Options > Video > Record. To pause
recording, select Pause; to resume recording, select Continue. To stop
recording, select Stop. The phone saves the recording in Gallery > Video
clips. To view the options, select Options.
Camera settings
Select Menu > Media > Camera > Options > Settings, and edit the
available settings.
Camera effects
Select Menu > Media > Camera > Options > Effects and one of the
available options.
■ Media player
With the media player you can view, play, and download files, such as
images, audio, video and animated images. You can also view
compatible streaming videos from a network server (network service).
Select Menu > Media > Media player > Open gallery, Bookmarks, Go to
address, or Media downloads.
Set for streaming service
You may receive the configuration settings required for the streaming as
a configuration message from the network operator or service provider.
See “Configuration settings service,” p. 10. To enter the settings
manually, see “Configuration,” p. 70.
Select Menu > Media > Media player > Streaming sett. and one of the
following options:
Configuration — Only the configurations that support streaming are
displayed. Select a service provider, Default, or Personal config.
Account — Select a streaming service account contained in the active
configuration settings.
77
M e d i a
■ Music player
Your phone includes a music player for listening to music tracks,
recordings, or MP3, MP4, WMA (Windows Media Audio), AAC, AAC+, or
eAAC+ sound files that you have transferred to the phone with the
Nokia Music Manager application. Music files are automatically
detected and added to the default track list.
Play music tracks
1. Select Menu > Media > Music player. The details of the first track on
the default track list are shown.
2. To play a track, scroll to the track, and select
3. To skip to the beginning of the next track, select
.
. To skip to the
beginning of the previous track, select
twice.
4. To rewind the current track, select and hold
. To fast forward the
current track, select and hold . Release the key at the position you
want.
5. To pause the playing, select
.
Warning: Listen to music at a moderate level. Continuous exposure to
high volume may damage your hearing.
Settings
In the Music player menu, the following options may be available:
Show tracks — to view all the tracks available on the track list. To play a
track, scroll to the track you want, and select Play.
Music library — to browse your music library according to following
criteria: All tracks, Artists, Albums, Genres, Composers or Track lists. To
update the contents of your music library, select Update library.
Play options > Random > On — to play the tracks in the track list in
random order. Select Repeat > Current track or All tracks to play the
current track or the entire track list repeatedly.
Media equaliser — to open the list of media equalizer sets. See
“Equalizer,” p. 82.
78
M e d i a
Add to Favourites — to add the current song to the Favourites track list
Play via Bluetooth — to connect and play music through a bluetooth
enabled audio accessory using bluetooth connection
Use tone — to use the current song as a ring tone for example. You are
presented a list of possible options for the tone.
Send — to send the selected file using MMS or a bluetooth connection
Web page — to connect to a browser service related to the current track.
This function is only available when the address of the service is
included in the track.
Music downloads — to download music through web
Memory status — to view the free and used memory capacity
■ Radio
The FM radio depends on an antenna other than the wireless device
antenna. A compatible headset or enhancement needs to be attached to
the device for the FM radio to function properly.
Warning: Listen to music at a moderate level.Continuous exposure to
high volume may damage your hearing.
Select Menu > Media > Radio. To use the graphical keys
on the phone display, scroll left or right to the key you want and
select it.
,
,
, or
Save channels
1. To start the channel search, select and hold
or . To change the
.
radio frequency in 0.05 MHz steps, press
or
2. To save the channel to a memory location, 1 to 9, press and hold the
corresponding number key.
3. To save the channel in the memory location from 10 to 20, press 1 or
2, and press and hold the number key (0 to 9) you want.
4. Enter the name of the channel, and select OK.
79
M e d i a
Listen
1. Select Menu > Media > Radio.
2. To scroll to the channel you want, select
headset key.
or , or press the
3. To select a radio channel location, briefly press the corresponding
number keys.
4. Select Options and one of the following options:
Switch off — to turn off the radio
Save station — to save a new channel by entering the channel’s name
Visual Radio — to set whether the Visual Radio application is used
(network service). To check the availability and costs, contact your
network operator or service provider. Some radio channels may send
text or graphical information that you can view using the Visual
Radio application.
Loudspeaker or Headset — to listen to the radio using the
loudspeaker (limited to FM radio) or headset. Keep the headset
connected to the phone. The lead of the headset functions as the
radio antenna.
Mono output or Stereo output — to listen to the radio in monophonic
sound or in stereo
Stations — to select the list of saved channels. To delete or rename a
channel or edit the visual service ID, scroll to the channel you want,
and select Options > Delete station or Rename or Visual service ID.
Search all stations — to start automatic search and save function for
all available radio channels. The search picks up only the strongest
available radio channels.
Set frequency — to enter the frequency of the radio channel you
want
Station directory— to activate the station directory (network service)
to seek available radio stations and save them for later use
80
M e d i a
Enable visual serv. — To set whether the Visual Radio application
starts automatically when you turn on the radio, select Enable visual
serv. > Automatically.
You can normally make a call or answer an incoming call while listening
to the radio. During the call, the volume of the radio is muted.
When an application using a packet data or HSCSD connection is
sending or receiving data, it may interfere with the radio.
■ Recorder
You can record pieces of speech, sound, or an active call. This is useful
when recording a name and phone number for writing them down later.
Record sound
1. Select Menu > Media > Recorder.
2. To start recording, select . To start recording during a call, select
faint beeping sound. When recording a call, hold the phone in the
normal position near to your ear.
3. To stop recording, select
.
The recording is saved in Gallery > Recordings.
4. To listen to the latest recording, select Options > Play last recorded.
5. To send the last recording using bluetooth or as a multimedia
message, select Options > Send last recorded.
List of recordings
1. Select Menu > Media > Recorder > Options > Recordings list.
The list of folders in the Gallery is shown.
2. Open Recordings to see the list with recordings.
3. Select Options to select options for files in Gallery. See “Gallery,”
p. 75.
81
M e d i a
Define a storage folder
To use a folder other than Recordings as the default folder in Gallery,
select Menu > Media > Recorder > Options > Select memory and a
folder from the list.
■ Equalizer
You can control the sound quality when using the music player by
amplifying or attenuating frequency bands.
1. Select Menu > Media > Equaliser.
2. To activate a set, scroll to one of the equalizer sets, and select
Activate.
3. To view, edit, or rename a selected set, select Options > View, Edit, or
Rename.
Not all sets can be edited or renamed.
■ Stereo widening
This function can only be used if your Nokia mobile phone is connected
to a compatible stereo headset.
To enhance the sound that is available in stereo with a wider stereo
effect, select Menu > Media > Stereo widening > On.
82
P u s h t o t a l k
12. Push to talk
Push to talk (PTT) over cellular is a two-way radio service
available over a GSM/GPRS cellular network (network service). PTT
provides direct voice communication. To connect, press the volume up
key.
You can use PTT to have a conversation with one person or with a group
of people having compatible devices. When your call is connected, the
people you are calling do not have to answer the phone. The participants
should confirm the reception of any communication where appropriate,
as there is no other confirmation whether the recipients have heard the
call.
To check availability and costs, and to subscribe to the service, contact
your service provider. Roaming services may be more limited than for
normal calls.
Before you can use the PTT service, you must define the required PTT
service settings. See “PTT settings,” p. 88.
While you are connected to the PTT service, you can use the other
functions of the phone. The PTT service is not connected to traditional
voice communication; therefore many of the services available for
traditional voice calls (for example, voice mailbox) are not available for
PTT communication.
■ Connect and disconnect
To connect to the PTT service, select Menu > Push to talk > Switch PTT
on. indicates the PTT connection.
indicates that the service is
temporarily unavailable. The phone automatically tries to reconnect to
the service until you disconnect from the PTT service. If you have added
channels to the phone, you are automatically joined to the active
channels.
To disconnect from the PTT service, select Switch PTT off.
83
P u s h t o t a l k
■ Make and receive a PTT call
Set the phone to use the loudspeaker or earpiece for PTT
communication. When the earpiece is selected, use the phone normally
by holding it to your ear.
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
When connected to the PTT service, you can make or receive channel
calls, group calls, or one-to-one calls. One-to-one calls are calls you
make to only one person.
Press and hold the volume up key the entire time you are talking, and
hold the phone in front of you so that you can see the display. When you
are finished, release the volume up key. Talking is allowed on a first
come, first served basis. When someone stops talking, the first person to
press the key used for PTT can talk next.
To check the login status of your contacts, select Menu > Push to talk >
Contacts list. This service depends on your service provider and is only
available for subscribed contacts.
indicates the contact is available.
indicates the contact is not logged into the PTT service.
indicates the contact is unknown.
indicates the contact does not want to be disturbed. You cannot
call the contact, but you can send a callback request.
To subscribe a contact, select Options > Subscribe contact; or if one or
more contacts are marked, select Subscribe marked.
Make a channel or a group call
To make a call to the default channel, press the volume up key. A tone
sounds, indicating that the access is granted, and the phone displays
your nickname and channel name. See “PTT channels,” p. 87.
To make a call to a nondefault channel, select Channel list in the PTT
menu, scroll to the channel you want, and press the volume up key.
84
P u s h t o t a l k
To make a group call from Contacts, the recipients must be connected to
the PTT service. Select Menu > Contacts > Groups, scroll to the group
you want, and press the volume up key.
Make a one-to-one call
To start a one-to-one call from the list of contacts to which you added
the PTT address, select Contacts list. Scroll to a contact, and press the
volume up key.
You can also select the contact from Contacts.
To start a one-to-one call from the list of PTT channels, select Channel
list, and scroll to the channel you want. Select Members, scroll to the
contact you want, and press the volume up key.
To start a one-to-one call from the list of callback requests you have
received, select Callback inbox. Scroll to the contact you want, and press
the volume up key.
Make a PTT call to multiple recipients
You can select multiple PTT contacts from the contact list. The recipients
receive an incoming call and must accept the call to participate.
Select Menu > Push to talk > Contacts list, and mark the contacts you
want. To make the call, press the volume up key. The contacts who
accept the call are shown.
Receive a PTT call
A short tone notifies you of an incoming PTT call. Information such as
the channel name or the nickname (network service) of the caller is
displayed.
If you have set the phone to first notify you of one-to-one calls, accept
or reject the call.
If you press the volume up key to try to respond to a call while another
member is talking, you hear a tone, and Queuing is displayed as long as
you press the volume up key. Press and hold the volume up key, and wait
for the other person to finish; then you can talk.
85
P u s h t o t a l k
■ Callback requests
If you make a one-to-one call and do not get a response, you can send a
request for the person to call you back.
Send a callback request
You can send a callback request in the following ways:
To send a callback request from the contacts list in the Push to talk
menu, select Contacts list. Scroll to a contact, and select Options >
Send PTT callback.
To send a callback request from Contacts, search for the contact you
want, select Details, scroll to the PTT address, and select Options > Send
PTT callback.
To send a callback request from the channel list in the Push to talk
menu, select Channel list, and scroll to the channel you want. Select
Members, scroll to the contact you want, and select Options > Send PTT
callback.
To send a callback request from the callback request list in the Push to
talk menu, select Callback inbox. Scroll to a contact, and select
Options > Send PTT callback.
Respond to a callback request
When you receive a callback request, Callback request received is shown
in the standby mode. Select View. The list of contacts who have sent you
callback requests is shown.
• To make a one-to-one call, press the volume up key.
• To send a call request back to the sender, select Options > Send PTT
callback.
• To delete the request, select Options > Delete callback.
• To view the sender's PTT address, select View.
• To save a new contact or to add the PTT address to a contact, select
Options > Save as or Add to contact.
86
P u s h t o t a l k
■ Add a one-to-one contact
You can save the names of persons to whom you often make one-to-one
calls in the following ways:
To add a PTT address to a name in Contacts, search for the desired
contact, and select Details > Options > Add detail > PTT address.
To add a contact to the PTT contacts list, select Menu > Push to talk >
Contacts list > Options > Add contact.
To add a contact from the channel list, connect to the PTT service, select
Channel list, and scroll to the channel you want. Select Members, scroll
to the member whose contact information you want to save, and select
Options. To add a new contact, select Save as. To add a PTT address to a
name in Contacts, select Add to contact.
■ PTT channels
When you call a channel, all members joined to the channel hear the call
simultaneously.
There are three types of PTT channels:
Provisioned channel — apermanent channel created by the service
provider
Public channel — Every channel member can invite other persons.
Private channel — Only persons who receive an invitation from the
channel creator can join in.
Add a channel
To add a public or private channel, select Menu > Push to talk > Add
channel, and edit the settings in the form fields:
Channel status: — Select Active or Inactive.
Chnl. nickname: — Enter your nickname for the channel.
Chnl. security: — Select Public channel or Private channel.
To send an invitation to the group, select Yes when the phone requests
it. You can send the invitation using SMS.
87
P u s h t o t a l k
To add a provisioned channel, select Menu > Push to talk > Add
channel > Options > Edit add. manually. Enter the channel address
provided by your service provider.
Receive an invitation
When you receive a text message invitation to a group, Channel
invitation received: is displayed.
1. To view the contact who sent the invitation and the channel address
if the group is not a private channel, select View.
2. To add the channel to your phone, select Save.
3. To set the status for the channel, select Active or Inactive.
4. To reject the invitation, select View > Discard > Yes.
■ PTT settings
There are two kinds of PTT settings: settings for connecting to the
service and settings for use.
You may receive the settings for connecting to the service from your
network operator or service provider. See “Configuration settings
service,” p. 10. You can enter the settings manually. See
“Configuration,” p. 70.
To select the settings for connecting to the service, select Menu > Push
to talk > Config. settings and one of the following options:
Configuration — to select a service provider, Default, or Personal config.
for PTT service. Only the configurations that support the PTT service are
shown.
Account — to select a PTT service account in the active configuration
settings
You can also select from other available options.
To edit the PTT settings for use, select Menu > Push to talk > PTT
settings, and one of the following options:
1 to 1 calls > On — to set the phone to allow the reception of
one-to-one calls. To make but not receive one-to-one calls, select Off.
88
P u s h t o t a l k
The service provider may offer some services that override these
settings. To set the phone to first notify you of incoming one-to-one
calls with a ringing tone, select Notify.
PTT key default function > Open contact list, Open channel list, Call
contact/group, or Call PTT channel
Show my login status > Yes — to enable the sending of the login status
PTT status in startup > Yes or Ask first — to set the phone to
automatically connect to the PTT service when you switch on the phone
Push to talk when abroad — to switch the PTT service on or off when the
phone is used outside of the home network
Send my PTT address > No — to hide your PTT address from calls
89
O r g a n i z e r
13. Organizer
Your Nokia mobile phone has many useful features for organizing your
everyday life. The following features are found in Organiser: alarm clock,
calendar, to-do list, notes, calculator, timer, and stopwatch.
■ Alarm clock
The alarm clock uses the time format set for the clock. The alarm clock
works even when the phone is turned off if there is enough power in the
battery.
To set the alarm, select Menu > Organiser > Alarm clock > Alarm time,
and enter the alarm time. To change the alarm time when the alarm
time is set, select On. To set the phone to alert you on selected days of
the week, select Repeat alarm.
To select the alarm tone or set a radio channel as the alarm tone, select
Menu > Organiser > Alarm clock > Alarm tone. If you select the radio as
an alarm tone, connect the headset to the phone. The phone uses the
last channel you listened to as the alarm, and the alarm plays through
the loudspeaker. If you remove the headset or switch off the phone, the
default alarm tone replaces the radio.
To set a snooze time-out, select Snooze time-out and the time you
want.
Alert tone and message
The phone sounds an alert tone and flashes Alarm! and the current time
on the display, even if the phone is switched off. To stop the alarm,
select Stop. If you let the phone continue to sound the alarm for a
minute or select Snooze, the alarm stops for the selected snooze
time-out and then resumes.
If the alarm time is reached while the device is switched off, the device switches
itself on and starts sounding the alarm tone. If you select Stop, the device asks
whether you want to activate the device for calls. Select No to switch off the
90
O r g a n i z e r
device or Yes to make and receive calls. Do not select Yes when wireless phone
use may cause interference or danger.
■ Calendar
The calendar helps you keep track of reminders, calls that you need to
make, meetings, and birthdays.
Select Menu > Organiser > Calendar.
The current day is indicated by a frame in the month view. If there are
any notes set for the day, the day is in bold type. To view the day notes,
select View. To view a week, select Options > Week view. To delete all
notes in the calendar, select the month or week view and Options >
Delete all notes.
Other options for the calendar day view are make a note; delete, edit, or
move a note; copy a note to another day; send a note with Bluetooth
wireless technology; or send a note as a text message or multimedia
message to the calendar of another compatible phone. In Settings, you
can set the date and time settings. In the Auto-delete notes option, you
can set the phone to delete old notes automatically after a specified
time.
Make a note
Select Menu > Organiser > Calendar, the date you want, and Options >
Make a note and one of the following note types: Meeting, Call,
Birthday, Memo or Reminder.
Note alarm
The phone beeps, and displays the note. If a call note appears, to call the
displayed number, press the call key. To stop the alarm and to view the
note, select View. To stop the alarm for 10 minutes, select Snooze. To
stop the alarm without viewing the note, select Exit.
91
O r g a n i z e r
■ To-do list
You can save a note for a task that you have to do, select a priority level
for the note, and mark it as done when you have completed it. You can
sort the notes by priority or by date.
To-do notes
1. Select Menu > Organiser > To-do list.
2. If no note is added, select Add note; otherwise, select Options >
Add.
3. Write the note, select the priority, set the deadline and the alarm
type for the note, and select Save.
4. To view a note, scroll to it, and select View.
■ Notes
To use Notes to write and send notes to compatible devices, use SMS or
MMS.
1. Select Menu > Organiser > Notes.
2. To make a note if one is not added, select Add note; otherwise, select
Options > Make a note.
3. Write the note, and select Save.
4. To view a note, scroll to it, and select View.
■ Calculator
The calculator in your phone provides basic arithmetic and
trigonometric functions, calculates the square and the square root, the
inverse of a number, and converts currency values.
Note: This calculator has limited accuracy and is designed for simple
calculations.
Select Menu > Organiser > Calculator. Press # for a decimal point.
Scroll to the desired operation or function, or select it from the Options.
92
O r g a n i z e r
To save the exchange rate, select Options > Exchange rate. To perform
the currency conversion, enter the amount to be converted, and select
Options > In domestic or In foreign.
■ Timer
1. Select Menu > Organiser > Timer > Normal timer; enter the alarm
time in hours, minutes, and seconds; and select OK.
You can write your own note text, which will display when the time
expires.
2. To start the timer, select Start.
3. To change the countdown time, select Change time.
4. To stop the timer, select Stop timer.
If the alarm time is reached when the phone is in the standby mode, the
phone sounds a tone and flashes the note text (if it is set) or Countdown
time up. To stop the alarm, press any key. If no key is pressed, the alarm
automatically stops within 60 seconds. To stop the alarm and to delete
the note text, select Exit. To restart the countdown timer, select Restart.
■ Stopwatch
You can measure time, take intermediate times, or take lap times using
the stopwatch. During timing, the other functions of the phone can be
used. To set the stopwatch timing in the background, press the end key.
Using the stopwatch or allowing it to run in the background when using
other features increases the demand on battery power and reduces the
battery life.
93
A p p l i c a t i o n s
14. Applications
■ Games
Your phone software includes some games.
Launch
Select Menu > Applications > Games, scroll to the game you want, and
select Open.
For options related to a game, see “Other application options,” p. 94.
Downloads
Select Menu > Applications > Options > Downloads > Game
downloads. The list of available bookmarks is shown.
Important: Only install and use applications and other software from
sources that offer adequate security and protection against harmful
software.
Settings
To set sounds, lights, and shakes for the game, select Menu >
Applications > Options > App. settings.
■ Collection
Your phone software includes some Java applications, such as a world
clock.
Launch an application
Select Menu > Applications > Collection; scroll to an application; and
select Open, or press the call key.
Other application options
Delete — to delete the application or application set from the phone
94
A p p l i c a t i o n s
Details — to give additional information about the application
Update version — to check if a new version of the application is available
for download from the Web (network service)
App. access — to restrict the application from accessing the network.
Different categories are shown. Select in each category one of the
available permissions.
Web page — to provide further information or additional data for the
application from an internet page (network service). It is only shown if
an internet address has been provided with the application.
Download applications
Important: Only install and use applications and other software from
sources that offer adequate security and protection against harmful
software.
Your phone supports J2ME™ Java applications. Make sure that the
application is compatible with your phone before downloading it
(network service).
You can download new Java applications in different ways:
• Select Menu > Applications > Options > Downloads > App.
downloads, and the list of available bookmarks is shown.
For the availability of different services, pricing, and tariffs, contact
your service provider.
• Use the game download function. See “Downloads,” p. 94.
• Use the Nokia Application Installer from Nokia PC Suite to download
the applications to your phone.
Your device may have some bookmarks loaded for sites not affiliated with Nokia.
Nokia does not warrant or endorse these sites. If you choose to access them, you
should take the same precautions, for security or content, as you would with any
internet site.
95
W e b
15. Web
Your phone has a built-in browser you can use to connect
to selected services on the mobile internet. Many wireless mobile
internet access features are network-dependent, and some features
may not be available. Contact your service provider for more
information.
■ Technology background
A technology called wireless application protocol (WAP) is to mobile
devices what the world wide web (WWW) is to personal computers.
Most WAP sites are made up of text and hyperlinks. Some pages even
contain low-resolution graphics, or require data input.
You may not be able to view all the details of the mobile internet pages,
as page appearance may vary due to screen size.
■ Service provider
Because mobile internet content is designed to be viewed from your
phone, your service provider is now your mobile internet service provider
as well. It is likely that your service provider has created a home page
and set up your WAP browser to go to this page when you log on to the
mobile internet. Once at your service provider’s home page, you may
find links to a number of other sites.
■ Access service
Set up service
You may receive the configuration settings required for browsing as a
configuration message from the network operator or service provider
that offers the service that you want to use. See “Configuration settings
service,” p. 10. You can also enter all the configuration settings
manually. See “Configuration,” p. 70.
96
W e b
Activate the settings
Ensure that the Web settings of the service you want to use are
activated.
1. Select Menu > Web > Settings > Configuration settings >
Configuration.
Only the configurations that support the browsing service are shown.
2. Select a service provider or Personal config. for browsing.
3. Select Account and a browsing service account contained in the
active configuration settings.
4. If you want to perform manual user authentication for intranet
connections, select Display terminal window > Yes.
Connect to a service
There are several ways to connect to a service.
• To open the service’s home page, select Menu > Web > Home; or in
the standby mode, press and hold 0.
• To select a bookmark, select Menu > Web > Bookmarks.
• To select the last viewed web site, select Menu > Web > Last web
address.
• To enter the address of the service, select Menu > Web > Go to
address, enter the address of the service, and select OK.
■ Browse
It should not be necessary to manually configure the browser on your
phone. Normally this is done by your service provider once you have
subscribed to the feature. Contact your service provider if you have
problems using the browser.
After you make a connection to the service, you can start browsing its
pages. The function of the phone keys may vary in different services.
Follow the text guides on the phone display. For more information,
contact your service provider.
97
W e b
If EGPRS or GPRS is selected as the data bearer, either
or
is
shown in the top left of the display during browsing. If you receive a call
or a text message, or make a call during an EGPRS or GPRS connection,
or is shown in the top right of the display to indicate that the
EGPRS or GPRS connection is suspended (on hold). After a call, the
phone tries to reconnect the EGPRS or GPRS connection.
Phone keys
• To browse through the page, press the scroll key in any direction.
• To select a highlighted item, press the call key.
• To enter letters and numbers, press the keys, 0 to 9.
• To enter special characters, press *.
Options
Beside the options available on your device, your service provider may
offer other options.
Direct calling
The browser supports functions that you can access while browsing. You
can make a phone call or save a name and a phone number from a page.
Appearance settings
While browsing, select Options > Other options > Appear. settings; or in
the standby mode, select Menu > Web > Settings > Appearance
settings and one of the following options:
Text wrapping > On — to set the text to continue on the next line in the
display. If you select Off, the text is abbreviated.
Font size — to set the font size for mobile internet pages
Show images > No — to hide pictures on the page. This can speed up the
browsing of pages that contain a lot of pictures.
Alerts > Alert for unsecure connection > Yes — to set the phone to alert
when a encrypted connection changes to an unencrypted one during
browsing
98
W e b
Alerts > Alert for unsecure items > Yes — to set the phone to alert when
a encrypted page contains an unsecure item. These alerts do not
guarantee a secure connection. For more information, see “Browser
security,” p. 101.
Character encoding > Content encoding — to select the encoding for the
browser page content
Character encoding > Unicode (UTF-8) web addresses > On — to set the
phone to send a URL as a UTF-8 encoding. You may need this setting
when you access a web page created in a foreign language.
Screen size > Full or Small— to set the screen layout
JavaScript > Enable — to enable JavaScript™
■ Security settings
Cookies
A cookie is data that a site saves in the cache memory of your phone.
Cookies are saved until you clear the cache memory. See “Cache
memory,” p. 101.
While browsing, select Options > Other options > Security > Cookie
settings; or in the standby mode, select Menu > Web > Settings >
Security settings > Cookies. To allow or prevent the phone receiving
cookies, select Allow or Reject.
Scripts over secure connection
You can select whether to allow the running of scripts from a secure
page. The phone supports WML scripts. While browsing, select
Options > Other options > Security > WMLScript sett.; or in the standby
mode, select Menu > Web > Settings > Security settings > WMLScripts
over secure connection. To allow the scripts, select Allow.
■ Bookmarks
You can save page addresses as bookmarks in the phone memory.
99
W e b
1. While browsing, select Options > Bookmarks; or in the standby
mode, select Menu > Web > Bookmarks.
2. Scroll to a bookmark, and select it; or press the call key to make a
connection to the page associated with the bookmark.
3. Select Options to view, edit, delete, or send the bookmark; create a
new bookmark; or move the bookmark to a folder.
Your device may have some bookmarks loaded for sites not affiliated with Nokia.
Nokia does not warrant or endorse these sites. If you choose to access them, you
should take the same precautions, for security or content, as you would with any
internet site.
Receive
When you have received a bookmark that is sent as a bookmark, 1
bookmark received is displayed. The received bookmark is saved
automatically to Bookmarks. To view it, select Show > Bookmarks.
■ Download settings
To automatically save all downloaded files in the Gallery, select Menu >
Web > Settings > Downloading settings > Automatic saving > On.
■ Service inbox
The phone is able to receive service messages (pushed messages) sent by
your service provider (network provider). Service messages are
notifications (for example, news headlines). These messages may
contain a text message or an address of a service.
To access the Service inbox in the standby mode, when you have
received a service message, select Show. If you select Exit, the message
is moved to the Service inbox. To access the Service inbox later, select
Menu > Web > Service inbox.
Settings
Select Menu > Web > Settings > Service inbox settings.
100
W e b
To set whether you want to receive service message, select Service
messages > On or Off.
To set the phone to receive service messages only from content authors
approved by the service provider, select Message filter > On. To view the
list of the approved content authors, select Trusted channels.
To set the phone to automatically activate the browser from the standby
mode when the phone has received a service message, select Automatic
connection > On. If you select Off, the phone activates the browser only
after you select Retrieve when the phone has received a service
message.
■ Cache memory
A cache is a memory location that is used to store data temporarily. If you have
tried to access or have accessed confidential information requiring passwords,
empty the cache after each use. The information or services you have accessed is
stored in the cache.
To empty the cache, while browsing, select Options > Other options >
Clear the cache.
To empty the cache, while in the standby mode, select Menu > Web >
Clear the cache.
■ Browser security
Security features may be required for some services, such as online
banking or shopping. For such connections, you need security
certificates and possibly a security module, which may be available on
your SIM card. For more information, contact your service provider.
Security module
The security module improves security services for applications
requiring a browser connection, and allows you to use a digital
signature. The security module may contain certificates as well as
private and public keys. The certificates are saved in the security module
by the service provider.
101
W e b
Select Menu > Settings > Security > Security module settings and one
of the following options:
Security module details — to show the security module title,
manufacturer, and serial number
Module PIN request — to set the phone to ask for the module PIN when
using services provided by the security module. Enter the code, and
select On. To disable the module PIN request, select Off.
Change module PIN — to change the module PIN, if allowed by the
security module. Enter the current module PIN code, then the new code
twice.
Change signing PIN — to change the signing PIN code for the digital
signature. Select the signing PIN you want to change. Enter the current
PIN code, then the new code twice.
See also “Access codes,” p. 9.
Certificates
Important: Even if the use of certificates makes the risks involved in
remote connections and software installation considerably smaller,
they must be used correctly in order to benefit from increased security.
The existence of a certificate does not offer any protection by itself;
the certificate manager must contain correct, authentic, or trusted
certificates for increased security to be available. Certificates have a
restricted lifetime. If Expired certificate or Certificate not valid yet is
shown even if the certificate should be valid, check that the current
date and time in your device are correct.
Before changing any certificate settings, you must make sure that you
really trust the owner of the certificate and that the certificate really
belongs to the listed owner.
There are three kinds of certificates: server certificates, authority
certificates, and user certificates. You may receive these certificates
from your service provider. Authority certificates and user certificates
may also be saved in the security module by the service provider.
To view the list of the authority or user certificates downloaded into
your phone, select Menu > Settings > Security > Authority certificates
or User certificates.
102
W e b
The security indicator is displayed during a connection, if the data
transmission between the phone and the content server is encrypted.
The security icon does not indicate that the data transmission between the
gateway and the content server (or place where the requested resource is stored)
is secure. The service provider secures the data transmission between the
gateway and the content server.
Digital signature
You can make digital signatures with your phone if your SIM card has a
security module. Using the digital signature can be the same as signing
your name to a paper bill, contract, or other document.
To make a digital signature, select a link on a page, such as the title of
the book you want to buy and its price. The text to sign is displayed,
which may include the amount and date.
Check that the header text is Read and that the digital signature icon
is shown.
If the digital signature icon does not appear, there is a security breach,
and you should not enter any personal data such as your signing PIN.
To sign the text, read all of the text first, and select Sign.
The text may not fit within a single screen. Therefore, make sure to scroll
through and read all of the text before signing.
Select the user certificate you want to use. Enter the signing PIN (see
“Access codes,” p. 9), and select OK. The digital signature icon
disappears, and the service may display a confirmation of your purchase.
103
S I M s e r v i c e s
16. SIM services
Your SIM card may provide additional services that you
can access. This menu is shown only if it is supported by your SIM card.
The name and contents of the menu depend on the SIM card.
For availability, rates, and information on using SIM services, contact your
service provider.
To access these services, it may be necessary to send messages or make a
phone call for which you may be charged.
104
C o m p u t e r c o n n e c t i v i t y
17. Computer connectivity
You can send and receive e-mail, and access the internet when your
phone is connected to a compatible PC through Bluetooth or USB data
cable (CA-53) connection. You can use your phone with a variety of PC
connectivity and data communications applications.
■ USB data storage
You can use the USB data cable to transfer data between the memory
card inserted in the phone and a compatible PC. See “USB data cable,”
p. 67. After transferring data, ensure that it is safe to unplug the USB
data cable from the PC.
■ Nokia PC Suite
Nokia PC Suite software is available for your phone. Nokia PC Suite is a
features and data. Each component is a separate program that includes
online helps. Nokia PC Suite software, installation instructions, and
other documentation is provided free of charge and can be downloaded
from the software downloads of the Nokia web site:
■ EGPRS, GPRS, HSCSD, and CSD
You can use the enhanced GPRS (EGPRS), general packet radio service
(GPRS), high-speed circuit switched data (HSCSD), circuit-switched
data (CSD), and GSM data services with your phone.
For availability and subscription to data services, contact your service
provider.
The use of HSCSD services consumes the phone battery faster than
normal voice or data calls. You may need to connect the phone to a
charger for the duration of data transfer. See “Packet data settings,”
p. 65.
105
C o m p u t e r c o n n e c t i v i t y
For information on using a data communication application, refer to the
documentation provided with it.
Making or answering phone calls during a computer connection is not
recommended, as it might disrupt the operation.
■ Bluetooth
Use Bluetooth technology to connect your compatible laptop to the
internet. Your phone must have activated a service provider that
supports internet access and your PC has to support Bluetooth PAN
(Personal Area Network). After connecting to the network access point
(NAP) service of the phone and pairing with your PC your phone
automatically opens a packet data connection to the internet. PC Suite
software installation is not necessary when using the NAP service of the
phone.
See “Bluetooth wireless technology,” p. 63.
106
B a t t e r y i n f o r m a t i o n
19. Battery information
■ Charging and discharging
Your device is powered by a rechargeable battery. The full performance of a new
battery is achieved only after two or three complete charge and discharge cycles.
The battery can be charged and discharged hundreds of times, but it will
eventually wear out. When the talk and standby times are noticeably shorter
than normal, replace the battery. Use only Nokia approved batteries, and
recharge your battery only with Nokia approved chargers designated for this
device.
If a replacement battery is being used for the first time or if the battery has not
been used for a prolonged period, it may be necessary to connect the charger
then disconnect and reconnect it to begin charging the battery.
Unplug the charger from the electrical plug and the device when not in use. Do
not leave a fully charged battery connected to a charger, since overcharging may
shorten its lifetime. If left unused, a fully charged battery will lose its charge over
time.
If the battery is completely discharged, it may take a few minutes before the
charging indicator appears on the display or before any calls can be made.
Use the battery only for its intended purpose. Never use any charger or battery
that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object such as a coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the battery. (These look like metal strips
on the battery.) This might happen, for example, when you carry a spare battery
in your pocket or purse. Short-circuiting the terminals may damage the battery
or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery. Always try
to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the battery is fully charged.
Battery performance is particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also
explode if damaged. Dispose of batteries according to local regulations. Please
recycle when possible. Do not dispose as household waste.
108
B a t t e r y i n f o r m a t i o n
■ Nokia battery authentication guidelines
Always use original Nokia batteries for your safety. To check that you are getting
an original Nokia battery, purchase it from an authorized Nokia dealer, look for
the Nokia Original Enhancements logo on the packaging, and inspect the
hologram label using the following steps:
Successful completion of the four steps is not a total assurance of the
authenticity of the battery. If you have any reason to believe that your battery is
not an authentic original Nokia battery, you should refrain from using it, and take
it to the nearest authorized Nokia service point or dealer for assistance. Your
authorized Nokia service point or dealer will inspect the battery for authenticity.
If authenticity cannot be verified, return the battery to the place of purchase.
Authenticate hologram
1. W hen looking at the hologram on the label, you
should see the Nokia connecting hands symbol from
one angle and the Nokia Original Enhancements
logo when looking from another angle.
2. When you angle the hologram left, right, down, and
up, you should see 1, 2, 3, and 4 dots on each side
respectively.
3. Scratch the side of the label to reveal a 20-digit
code, for example, 12345678919876543210. Turn
the battery so that the numbers are facing upwards.
The 20-digit code reads starting from the number at
the top row followed by the bottom row.
109
B a t t e r y i n f o r m a t i o n
4. Confirm that the 20-digit code is valid by following
the instructions at www.nokia.com/batterycheck.
To create a text message enter the 20-digit code, for example,
12345678919876543210, and send to +44 7786 200276.
National and international operator charges will apply.
You should receive a message indicating whether the code can be authenticated.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the hologram on the label is
an authentic Nokia battery, please do not use the battery. Take it to the nearest
authorized Nokia service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and may result in poor
performance and damage to your device and its enhancements. It may also
invalidate any approval or warranty applying to the device.
To find out more about original Nokia batteries, visit www.nokia.com/battery.
110
C a r e a n d m a i n t e n a n c e
Care and maintenance
Your device is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you protect your warranty
coverage.
•
Keep the device dry. Precipitation, humidity and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, remove the battery and allow the device to dry
completely before replacing it.
•
•
•
Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
•
•
Do not attempt to open the device other than as instructed in this guide.
Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
•
•
•
•
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity
sensor, and light sensor lenses).
Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the device and may
violate regulations governing radio devices.
•
•
Use chargers indoors.
Always create a backup of data you want to keep (such as contacts and
calendar notes) before sending your device to a service facility.
All of the above suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest
authorized service facility for service.
111
A d d i t i o n a l s a f e t y i n f o r m a t i o n
Additional safety information
Your device and its enhancements may contain small parts. Keep them out of the
reach of small children.
■ Operating environment
Remember to follow any special regulations in force in any area, and always
switch off your device when its use is prohibited or when it may cause
interference or danger. Use the device only in its normal operating positions. This
device meets RF exposure guidelines when used either in the normal use position
against the ear or when positioned at least 1.5 centimeters (5/8 inch) from the
body. When a carry case, belt clip or holder is used for body-worn operation, it
should not contain metal and should position the device the above-stated
distance from your body. To transmit data files or messages, this device requires a
quality connection to the network. In some cases, transmission of data files or
messages may be delayed until such a connection is available. Ensure the above
separation distance instructions are followed until the transmission is
completed.
Parts of the device are magnetic. Metallic materials may be attracted to the
device. Do not place credit cards or other magnetic storage media near the
device, because information stored on them may be erased.
■ Medical devices
Operation of any radio transmitting equipment, including wireless phones, may
interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you have any
questions. Switch off your device in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care facilities may
be using equipment that could be sensitive to external RF energy.
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of
15.3 centimeters (6 inches) be maintained between a wireless phone and a
pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with pacemakers
should do the following:
112
A d d i t i o n a l s a f e t y i n f o r m a t i o n
•
Always keep the device more than 15.3 centimeters (6 inches) from the
pacemaker
•
•
Not carry the device in a breast pocket
Hold the device to the ear opposite the pacemaker to minimize the potential
for interference.
If you suspect interference, switch off your device, and move the device away.
Hearing aids
Some digital wireless devices may interfere with some hearing aids. If
interference occurs, consult your service provider.
■ Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, an air bag
systems. For more information, check with the manufacturer or its representative
of your vehicle or any equipment that has been added.
Only qualified personnel should service the device, or install the device in a
vehicle. Faulty installation or service may be dangerous and may invalidate any
warranty that may apply to the device. Check regularly that all wireless device
equipment in your vehicle is mounted and operating properly. Do not store or
carry flammable liquids, gases, or explosive materials in the same compartment
as the device, its parts, or enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device
before boarding an aircraft. The use of wireless teledevices in an aircraft may be
dangerous to the operation of the aircraft, disrupt the wireless telephone
network, and may be illegal.
■ Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere
and obey all signs and instructions. Potentially explosive atmospheres include
areas where you would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting in bodily injury or
even death. Switch off the device at refueling points such as near gas pumps at
service stations. Observe restrictions on the use of radio equipment in fuel
113
A d d i t i o n a l s a f e t y i n f o r m a t i o n
depots, storage, and distribution areas; chemical plants; or where blasting
operations are in progress. Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied petroleum gas (such as
propane or butane), and areas where the air contains chemicals or particles such
as grain, dust, or metal powders.
■ Emergency calls
Important: Wireless phones, including this device, operate using radio
signals, wireless networks, landline networks, and user-programmed
functions. Because of this, connections in all conditions cannot be
guaranteed. You should never rely solely on any wireless device for
essential communications like medical emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal strength.
Some networks may require that a valid SIM card is properly inserted in the
device.
2. Press the end key as many times as needed to clear the display and ready the
device for calls.
3. Enter the official emergency number for your present location. Emergency
numbers vary by location.
4. Press the call key.
If certain features are in use, you may first need to turn those features off before
you can make an emergency call. Consult this guide or your service provider for
more information.
When making an emergency call, give all the necessary information as accurately
as possible. Your wireless device may be the only means of communication at the
scene of an accident. Do not end the call until given permission to do so.
■ Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves
Your mobile device is a radio transmitter and receiver. It is designed not to
exceed the limits for exposure to radio waves recommended by international
guidelines. These guidelines were developed by the independent scientific
organisation ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
114
A d d i t i o n a l s a f e t y i n f o r m a t i o n
The exposure guidelines for mobile devices employ a unit of measurement known
as the Specific Absorption Rate, or SAR. The SAR limit stated in the ICNIRP
guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests
for SAR are conducted using standard operating positions with the device
transmitting at its highest certified power level in all tested frequency bands. The
actual SAR level of an operating device can be below the maximum value
because the device is designed to use only the power required to reach the
network. That amount changes depending on a number of factors such as how
close you are to a network base station. The highest SAR value under the ICNIRP
guidelines for use of the device at the ear is 1.15 W/kg.
Use of device accessories and enhancements may result in different SAR values.
SAR values may vary depending on national reporting and testing requirements
and the network band. Additional SAR information may be provided under
product information at www.nokia.com.
115
I n d e x
Index
A
D
access codes 9
active standby 19, 57
alarm clock 90
antenna 15
dialing 23
downloads
settings 100
B
E
battery
emergency calls 114
enhancements 107
charge 13
strength indicator 18
bluetooth 63
bookmarks 99
browser 97
I
instant messaging 35
business cards 49
C
K
calculator 92
calendar 91
call
keyguard 21
keys and parts 17
answer 24
end 23
M
log 51
maintenance 111
media player 77
memory card
format 75
make 23
options 25
reject 24
voice mail 42
waiting 24
camera
installation 13
slot 17
menu 26
messages
lens 17
use 76
audio 34
contacts
flash 33
add 47
copy 48
delete 48
delete details 48
edit 48
memory in use 49
my numbers 50
search 47
service numbers 50
info 42
multimedia 30
SIM 30
templates 33
text 27
voice 42
music player 78
my shortcuts 56
N
network services 7
116
Nokia PC Suite 105
notes 92
service
commands 43
inbox 100
settings
O
call 67
operator logo 55
operator menu 74
configuration 70
enhancement 70
modem 65
phone 68
P
phone software updates 72
plug and play service 14
profiles 53
restore factory 72
security 71
time and date 56
tones 54
PTT. See push to talk.
push to talk
shared memory 8
SIM card 12
callback requests 86
channel call 84
standby mode 18
standby mode shortcuts 20
stereo widening 82
summary after call 68
synchronization 65
channels 87
connect 83
disconnect 83
group call 84
make and receive calls 84
one-to-one call 85
settings 88
T
text entry 27
themes 53
R
to-do list 92
radio 79
V
S
voice commands 57
safety
certification information (SAR) 114
emergency calls 114
explosive environments 113
hearing aids 113
W
wallpaper 54
WLAN/Wi-Fi 58
wrist strap 16
medical devices 112
pacemakers 112
vehicles 113
117
|