Nokia 3510 User Manual

Electronic user’s guide released subject to "Nokia User’s Guides Terms and Conditions, 7th

June, 1998"

User´s Guide

9354276

Issue 3

Under no circumstances shall Nokia be responsible for any loss of data or income or any special,

incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of

any kind, either express or implied, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or

contents of this document. Nokia reserves the right to revise this document or withdraw it at any time

without prior notice

The availability of particular accessories may vary by region. Please check with the Nokia dealer nearest to

you.

9354276/ Issue 3

Quick and easy

This Quick Guide explains the basic functions of your Nokia 3510 mobile phone.

More information on these functions is given in chapters 3-6.

■ Making a call

• Before you can make your first call, see Installing the SIM card and the battery

to learn how to insert the SIM card, install and charge the battery, and switch

on your phone.

1. Key in the area code and phone number and press

2. Press to end the call.

■ Call functions

• Answering a call: Press

• Ending/rejecting a call: Press

. You can also press Silence to mute the

ringing, and then either answer or reject the call.

• Adjusting earpiece volume: During a call, press the scroll keys.

• Calling your voice mailbox: Press and hold

. If the phone asks for the

voice mailbox number, key it in and press OK.

• Speed dialling: First assign a phone number to a speed dialling key (see page

55). Then press the speed dialling key you want and

• Answering a waiting call: First activate Call waiting service (see page 36).

Then you can answer a waiting call by pressing . The first call is put on hold.

Press to end the active call.

For more information, see Phone book (Names - Menu 1) on page 50.

■ Sending a text message

1. Press Menu, select Messages and Write message

2. Key in a message. See Writing text on page 37.

See also Text and picture templates on page 61.

3. To send the message, press Options and select Send.

4. Enter the recipient’s phone number and press OK to send the message, or

search for the phone number in the phone book. Press OK to send the message.

For more information, see Messages (Menu 2) on page 59.

■ Locking and unlocking the keypad

To lock the keypad:

• In standby mode, press Menu and

within 1.5 seconds to lock the keypad.

within 1.5 seconds to unlock the

To unlock the keypad:

•In standby mode, press Unlock and

keypad.

To set the keypad to lock automatically:

•Press Menu, Settings, Phone settings and Automatic keyguard. Select On to

activate the keyguard and select the time after which the keypad

automatically locks.

Contents

Quick and easy.......................................................................................................4

Contents.................................................................................................................7

FOR YOUR SAFETY ..............................................................................................13

General information............................................................................................16

Stickers in the sales package .................................................................................................................16

Access codes ...............................................................................................................................................16

Overview of the functions of the phone...........................................................18

Multimedia messaging service ..............................................................................................................18

Polyphonic sound (MIDI) .........................................................................................................................18

GPRS (General Packet Radio Service) ..................................................................................................19

WAP (Wireless Application Protocol)...................................................................................................20

1. Your phone.......................................................................................................21

Keys and connectors.................................................................................................................................21

Standby mode.............................................................................................................................................22

2. Getting started ................................................................................................24

Installing the SIM card and the battery..............................................................................................24

Removing the SIM card........................................................................................................................26

Charging the battery ................................................................................................................................26

Switching the phone on and off ...........................................................................................................27

Keypad lock (Keyguard) ...........................................................................................................................29

Changing the covers.................................................................................................................................30

Putting on the carrying strap.................................................................................................................31

3. Call functions ..................................................................................................33

Making a call ..............................................................................................................................................33

Last number redialling..........................................................................................................................33

Calling your voice mailbox..................................................................................................................34

Speed dialling a phone number .........................................................................................................34

Making a conference call ....................................................................................................................34

Answering or rejecting an incoming call............................................................................................35

Call waiting..............................................................................................................................................35

Options during a call................................................................................................................................36

4. Writing text.....................................................................................................37

Setting predictive text input on or off................................................................................................37

Using predictive text input.....................................................................................................................37

Writing compound words....................................................................................................................39

Using traditional text input....................................................................................................................39

Tips for writing text..................................................................................................................................39

5. Using the menu ...............................................................................................41

Accessing a menu function ....................................................................................................................41

List of menu functions.............................................................................................................................43

6. Menu functions...............................................................................................50

Phone book (Names - Menu 1)..............................................................................................................50

Selecting the phone book settings....................................................................................................50

Saving names and phone numbers (Add name)............................................................................51

Saving multiple numbers and text items per name..................................................................51

Searching for a name in the phone book........................................................................................53

Editing a name, number or text item...............................................................................................53

Erasing names and numbers...............................................................................................................54

Copying phone books............................................................................................................................54

Sending and receiving a business card............................................................................................55

Assigning a number to a speed dialling key...................................................................................55

Voice dialling...........................................................................................................................................56

Adding a voice tag .............................................................................................................................56

Making a call using a voice tag......................................................................................................57

Replaying, changing or erasing a voice tag................................................................................58

Service numbers .....................................................................................................................................58

Ringing tone per name.........................................................................................................................58

Messages (Menu 2)...................................................................................................................................59

Writing and sending text messages..................................................................................................59

Options for sending a message..........................................................................................................60

Text and picture templates .................................................................................................................61

Inserting a text template into a message....................................................................................61

Inserting a picture template into a message..............................................................................61

Reading and replying to a text message.........................................................................................62

Inbox and outbox folders.....................................................................................................................63

Erasing text messages ..........................................................................................................................63

Chat............................................................................................................................................................63

My folders and Archive folder............................................................................................................64

Voice messages.......................................................................................................................................65

Info messages..........................................................................................................................................66

Service command editor ......................................................................................................................66

Text message settings...........................................................................................................................66

Receiving multimedia messages ...........................................................................................................67

Multimedia messaging settings.........................................................................................................68

Viewing multimedia messages...........................................................................................................69

Viewing the received message........................................................................................................69

Viewing a saved message.................................................................................................................70

Call register (Menu 3) ..............................................................................................................................70

Missed calls and received calls ..........................................................................................................71

Dialled numbers......................................................................................................................................71

Erase recent call lists ............................................................................................................................71

Call counters and call timers..............................................................................................................72

Tones (Menu 4)...........................................................................................................................................73

Profiles (Menu 5).......................................................................................................................................74

Settings (Menu 6) ....................................................................................................................................75

Time and date settings .........................................................................................................................75

Clock settings ......................................................................................................................................75

Date settings........................................................................................................................................75

Automatic update of date and time .............................................................................................75

Call settings.............................................................................................................................................76

Call divert..............................................................................................................................................76

Anykey answer.....................................................................................................................................76

Automatic redial.................................................................................................................................77

Speed dialling settings......................................................................................................................77

Call waiting service............................................................................................................................77

Summary after call.............................................................................................................................77

My number sending...........................................................................................................................77

Line for outgoing calls ......................................................................................................................78

Phone settings ........................................................................................................................................78

Language...............................................................................................................................................78

Keyguard settings...............................................................................................................................79

Cell info display...................................................................................................................................79

Welcome note......................................................................................................................................79

Network selection...............................................................................................................................79

Confirm SIM service actions............................................................................................................80

Help text activation...........................................................................................................................80

Start-up tone.......................................................................................................................................80

Accessory settings..................................................................................................................................80

Security settings.....................................................................................................................................81

Restore factory settings.......................................................................................................................82

Games (Menu 7).........................................................................................................................................83

Starting a game......................................................................................................................................83

Game services and game settings.....................................................................................................83

Organiser (Menu 8)...................................................................................................................................84

Alarm clock..............................................................................................................................................84

Calendar....................................................................................................................................................85

Making a calendar note....................................................................................................................86

When the phone alarms for a note...............................................................................................87

Tools (Menu 9)............................................................................................................................................87

Screen saver.............................................................................................................................................87

Screen saver activation timeout ....................................................................................................88

Receiving screen savers via MMS or picture messaging.........................................................88

Calculator.................................................................................................................................................88

Making a currency conversion........................................................................................................89

Countdown timer...................................................................................................................................90

Stopwatch................................................................................................................................................90

Time observation and time splitting .............................................................................................91

Lap times...............................................................................................................................................91

Viewing and erasing times...............................................................................................................92

Mobile Internet services, WAP (Menu 10)..........................................................................................92

Basic steps for accessing and using WAP services.......................................................................92

Setting up the phone for a WAP service.........................................................................................93

Saving the service settings received as a text message..........................................................93

Keying in the service settings manually ......................................................................................94

Settings when GSM data is the selected data bearer..............................................................95

Settings when GPRS is the selected data bearer ......................................................................95

Making a connection to a WAP service...........................................................................................96

Browsing the pages of a WAP service..............................................................................................98

General guidelines for using the phone keys..............................................................................98

WAP direct calling..............................................................................................................................99

Ending a WAP connection................................................................................................................ 100

Appearance settings of the WAP browser.................................................................................. 100

Download settings.............................................................................................................................. 101

Bookmarks............................................................................................................................................. 101

Receiving a bookmark .................................................................................................................... 102

Service inbox........................................................................................................................................ 102

To set the phone to receive service messages......................................................................... 103

The cache memory.............................................................................................................................. 103

Security indicator................................................................................................................................ 104

Authority certificates......................................................................................................................... 104

SIM services (Menu 11) ........................................................................................................................ 105

7. Battery statements....................................................................................... 106

Charging and Discharging.................................................................................................................... 106

CARE AND MAINTENANCE.............................................................................. 108

IMPORTANT SAFETY INFORMATION............................................................... 109

FOR YOUR SAFETY

Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further

detailed information is given in this manual.

Do not switch the phone on when wireless phone use is prohibited or when it

may cause interference or danger.

ROAD SAFETY COMES FIRST

Don’t use a hand-held phone while driving.

INTERFERENCE

All wireless phones may get interference, which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any regulations or rules. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELLING

Don’t use the phone at a refuelling point. Don’t use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Don’t use the phone where blasting is in progress. Observe restrictions, and

follow any regulations or rules.

USE SENSIBLY

Use only in the normal position. Don’t touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair phone equipment.

ACCESSORIES AND BATTERIES

Use only approved accessories and batteries. Do not connect incompatible

products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user’s guide for detailed safety

instructions. Do not connect incompatible products.

CALLING

Ensure the phone is switched on and in service. Enter the phone number,

including the area code, then press

call, press

. To end a call, press

. To answer a

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press

as many times as

needed (e.g. to exit a call, to exit a menu, etc.) to clear the display. Enter the

emergency number, then press

told to do so.

. Give your location. Do not end the call until

■ Network Services

The wireless phone described in this guide is approved for use on the EGSM 900 and GSM

1800 networks.

Dualband is a network dependent feature. Check with your local service provider if you can

subscribe to and use this feature.

A number of features included in this guide are called Network Services. These are special

services that you arrange through your wireless service provider. Before you can take

advantage of any of these Network Services, you must subscribe to them through your

service provider and obtain instructions for their use from your service provider.

Note: Some networks may not support all language-dependent characters and/or

services.

Check the model number of any charger before use with this device. This device is intended

for use when supplied with power from ACP-7, ACP-8 and LCH-9.

Warning: Use only batteries, chargers and accessories approved by the phone

manufacturer for use with this particular phone model. The use of any other types

may invalidate any approval or warranty applying to the phone, and may be

dangerous.

For availability of approved accessories, please check with your dealer.

When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.

General information

■ Stickers in the sales package

The stickers contain important information for service and customer support

purposes.

Attach the

package.

sticker to the Club Nokia Invitation Card supplied in the sales

Attach the

sticker to your warranty card.

■ Access codes

• Security code (5 digits): The security code protects your phone against

unauthorised use, and is supplied with the phone. The preset code is 12345.

Change the code in the Settings menu, see Security settings on page 81. Keep

the new code secret and in a safe place separate from your phone.

Set the phone to request the code, see Security settings on page 81.

• PIN code (4 trough 8 digits): The Personal Identification Number (PIN) code

protects your SIM card against unauthorised use. The PIN code is usually

supplied with the SIM card.

Set the phone to request the PIN code each time the phone is switched on, see

Security settings on page 81.

• PIN2 code (4 through 8 digits): The PIN2 code may be supplied with the SIM

card and is required to access some functions, such as charging unit counters.

• PUK and PUK2 codes (8 digits): The Personal Unblocking Key (PUK) code is

required to change a blocked PIN code. The PUK2 code is required to change a

blocked PIN2 code.

If the codes are not supplied with the SIM card, contact your local service

provider for the codes.

• Barring password: The barring password is needed when using the Call barring

service, see Security settings on page 81. The password is supplied by your

service provider.

Overview of the functions of the phone

The Nokia 3510 phone provides many functions which are very handy for daily

use, such as a Calendar, Clock, Alarm clock, Countdown timer, Calculator, Games,

and many more.

A range of accessory covers is also available for your phone. To change the covers,

see Changing the covers on page 30.

■ Multimedia messaging service

The multimedia messaging service enables you to receive multimedia messages.

These messages can be made up of text, graphics and sound. The graphic part can

be saved for use as a screen saver, and the sound part can be saved for use as a

ringing tone.

Note: The default setting of the multimedia message service is on (Allow

multimedia reception is set to Yes), and your operator or service provider may

charge you for every message you receive.

■ Polyphonic sound (MIDI)

Polyphonic sound consists of several sound components played at the same time

through a speaker. The polyphonic sounds make ringing tones sound like real

melodies compared to the beeps in traditional ringing tones. The polyphonic

sounds are used in ringing tones, message alert tones and in gaming for

background music . Your 3510 phone has sound components from over 40

instruments that can be used for polyphonic sounds. A maximum of four

instruments can be played simultaneously. The format supported is the Scalable

Polyphonic MIDI (SP-MIDI).

You can receive polyphonic ringing tones via multimedia service, see Receiving

multimedia messages on page 67 and Tones (Menu 4). You can also download

them via WAP via Tone services menu. See Tones (Menu 4) on page 73.

■ GPRS (General Packet Radio Service)

GPRS is a technology that allows mobile phones to be used for sending and

receiving data over the mobile network. GPRS is a data bearer that enables

wireless access to data networks such as the Internet. The applications which use

GPRS are WAP, MMS and SMS messages.

Before you can use GPRS technology

• You need to subscribe to the GPRS service.

For availability and subscription to GPRS service, contact your network

operator or service provider.

• You need to save the GPRS settings for the applications used over GPRS.

See Setting up the phone for a WAP service on page 93.

See Text message settings on page 66.

Fees for GPRS and applications

Both the active GPRS connection and the applications used over GPRS, for

example WAP services, sending and receiving data and SMS messages, require a

fee. For more detailed information on fees, contact your network operator or

service provider.

■ WAP (Wireless Application Protocol)

You can access various WAP services such as news, weather reports,

entertainment, cinema and online games. These services are specially designed for

mobile phones and they are maintained by WAP service providers.

Check the availability of WAP services, pricing and tariffs with your network

operator and/or the service provider whose services you wish to use. Service

providers will also give you instructions on how to use their services.

See Mobile Internet services, WAP (Menu 10) on page 92.

1. Your phone

■ Keys and connectors

1.Power key,

Switches the phone on and off.

While in the phone book or in menu

functions, or when the keypad is

locked, briefly pressing the power

key turns the phone’s display lights

on for approximately 15 seconds.

2.Selection keys,

and

The function of the keys depends on

the guiding text shown on the

display above the keys, for example

Menu and Names in standby mode.

3.Scroll keys,

and

Enables scrolling through names,

phone numbers, menus or settings.

Also adjusts the earpiece volume

during a call.

ends an active call. Exits from any function.

dials a phone number, and answers a call. In standby mode, it shows the

most recently called number.

enter numbers and characters. Pressing and holding

your voice mailbox.

and are used for various purposes in different functions, for example,

when locking the keypad.

calls

■ Standby mode

When the phone is ready for use and no characters have

been entered by the user, the phone is in standby mode.

The selection keys in standby mode are Menu and Names.

xxxxxx Indicates the cellular network in which the phone is currently being used.

Shows the signal strength of the cellular network at your current location.

The higher the bar, the stronger the signal.

Shows the battery charge level. The higher the bar, the more power in the

battery.

Other essential indicators in standby mode:

You have received one or several text or picture messages. See Reading

and replying to a text message on page 62.

You have received one or several voice messages. See Voice messages on

page 65.

The phone’s keypad is locked. See Keypad lock (Keyguard) on page 29.

The phone does not ring for an incoming call or for a text message when

Incoming call alert is set to Off and Message alert tone is set to Off. See

Tones (Menu 4) on page 73.

The alarm clock is set to On. See Alarm clock on page 84.

The countdown timer is running. See Countdown timer on

page 90.

The stopwatch timing is running in the background. See Stopwatch on

page 90.

All your calls are diverted to another number, Divert all voice calls. If you

have two phone lines, the divert indicator for the first line is

and for

the second line is . See Call divert on page 76.

Calls are limited to a closed user group (network service). See Security

settings on page 81.

2. Getting started

■ Installing the SIM card and the battery

•

Keep all miniature SIM cards out of the reach of small children.

• The SIM card and its contacts can easily be damaged by scratches or bending,

so be careful when handling, inserting or removing the card.

• Before installing the SIM card, always make sure that the phone is switched off

and you can then remove the battery.

1. With the back of the phone facing you,

press the release button. Slide and lift the

back cover off the phone in the direction

of the arrows.

2. Lift the battery out of the phone, the end

side first.

3. Insert the SIM card into the phone. Make sure

that the SIM card is positioned correctly and

that the golden contact area on the card is

facing downwards.

4. Replace the battery.

5. Replace the back cover. Make sure that the locking catches on the sides of the

covers go in the notches on the phone.

Removing the SIM card

If you need to remove the SIM card from the phone,

remove the back cover and the battery, press the snap

of the SIM card holder down and gently push the SIM

card towards the top of the phone.

■ Charging the battery

1. Connect the lead of the charger to the

socket on the bottom of your phone.

2. Connect the charger to an AC wall socket.

The text Charging is displayed briefly if

the phone is switched on. When the

battery is completely flat, it may take a

few minutes before the charging indicator appears on the display or any calls

can be made.

You can use the phone while the charger is connected.

The charging time depends on the charger and the battery used. For example,

charging a BLC-2 battery with the ACP-7 charger takes about 3 hours and 45

minutes.

■ Switching the phone on and off

Press and hold the power key,

Note that if the phone displays Insert SIM card even though

the SIM card is properly inserted, you should contact your

network operator or service provider. Your phone does not

support 5 Volt SIM cards and the card may need to be

changed.

• If the phone asks for a PIN code, key in the PIN code

(displayed as ****), and press OK.

See also PIN code request in Security settings on page 81

and Access codes on page 16.

• If the phone asks for a security code, key in the security

code (displayed as *****), and press OK.

See also Access codes on page 16.

Warning: Do not switch the phone on when wireless phone use is prohibited or

when it may cause interference or danger.

TIPS ON EFFICIENT OPERATION: Your phone has a built-in

antenna. As with any other radio transmitting device, do not touch

the antenna unnecessarily when the phone is switched on.

Contact with the antenna affects call quality and may cause the

phone to operate at a higher power level than otherwise needed.

Not touching the antenna area during a phone call optimises the

antenna performance and the talktime of your phone.

■ Keypad lock (Keyguard)

You can lock the keypad to prevent the keys being accidentally pressed, for

example, when your phone is in your bag.

• Locking the keypad

In standby mode, press Menu and then

within 1.5

seconds to lock the keypad.

When the keypad is locked,

the display.

appears at the top of

• Unlocking the keypad

Press Unlock and then

within 1.5 seconds to

unlock the keypad.

• When keyguard is on

To answer a call, press

. During a call, the phone can be operated normally.

When you end or reject a call, the keypad will automatically be locked.

• Automatic keyguard

You can set the keypad to lock automatically after a certain time. See Keyguard

settings on page 79.

Note: When Keyguard is on, calls may be possible to the emergency number

programmed into your phone (e.g. 112 or other official emergency number). Key in

the emergency number and press

keyed in its last digit.

. The number is displayed only after you have

■ Changing the covers

Before changing either cover, always switch off the power and disconnect the phone from

the charger or any other device. Always store and use the phone with the covers attached.

1. To remove the back cover of the phone,

with the back of the phone facing you,

press the back cover release button and

slide the cover off the phone. See

Installing the SIM card and the battery on

page 24.

2. Gently pull the front cover off the phone

starting from the bottom.

3. Replace the key mat on the new front cover, if

necessary.

4. To replace the front cover, align the bottom of

the phone with the bottom of the front cover

and gently push the phone towards the cover.

Ensure that the locking catches on the sides go

in the notches on the phone, and that the cover

is locked into place.

5. To replace the back cover of the phone, direct

the back cover towards the locking catches on

the front cover and slide the back cover until it locks into place. See Installing

the SIM card and the battery on page 24.

■ Putting on the carrying strap

1. Take off the back and front cover, see Changing the covers on

page 30.

2. Lift the power key from the edge shown in the picture.

You can also remove the power key completely, but

make sure not to lose it.

Insert the carrying strap by threading the strap

as shown in the picture and tighten.

3. Press the power key back in. Make sure it is

properly in place.

4. Replace the front and back cover, see Changing the covers on

page 30.

3. Call functions

■ Making a call

1. Key in the phone number, including the area code. To edit the number on the

display, press

to move the cursor and press Clear to delete the

character to the left of the cursor.

For international calls, press

twice for the international prefix (the +

character replaces the international access code) and then key in the country

code, area code and the phone number.

2. Press

3. Press

to call the number.

or End call to end the call (or to cancel the call attempt).

Making a call using the phone book

1. See Searching for a name in the phone book on page 53.

2. Press

to call the number on the display.

Last number redialling

In standby mode, press

once to access a list of the 20 numbers you most

recently called or attempted to call. Scroll to the number or name you want, and

press to call the number.

Calling your voice mailbox

In standby mode, press and hold

, or press

and

If the phone asks for the voice mailbox number, key it in and press OK. See also

Voice messages on page 65.

Speed dialling a phone number

Assign a phone number to one of the speed dialling keys, (from

through

), and you can call that number in either of the following ways:

• Press the speed dialling key you want and then press

• If Speed dialling is activated, press and hold a speed dialling key until the call is

started. See Speed dialling settings on page 77.

See also Assigning a number to a speed dialling key on page 55.

Making a conference call

Conference calling is a network service that allows up to six people to take part in

a conference call.

1. Make a call to the first participant.

2. To make a call to a new participant, press Options and select New call.

3. Key in or search the phone book for the phone number of the new participant

and press Call. The first call is put on hold.

4. When the new call has been answered, include the first participant in the

conference call. Press Options and select Conference.

5. To add a new participant to the call, repeat steps 2 through 4.

6. To have a private conversation with one of the participants:

Press Options and select Private. Scroll to the desired participant and press OK.

Once you have finished the private conversation, re-establish the conference

call as described in step 4 above.

7. To end the conference call, press

■ Answering or rejecting an incoming call

Press

to answer the incoming call and press

to end the call.

Press

to reject the incoming call.

If you press Silence, only the ringing tone is muted. Then either answer or reject

the call.

Tip: If the Divert if busy function is activated to divert the calls, for

example to your voice mailbox, rejecting an incoming call will also divert

the call. See Call divert on page 76.

Call waiting

You can answer an incoming call while you have a call in progress if you have

activated the function Call waiting service, see Call waiting service on page 77.

During a call, press

Press

to answer the waiting call. The first call is put on hold.

to end the active call.

■ Options during a call

Press Options during a call for some of the following network service options (if

they are available from your service provider and operator for the current call):

Mute or Unmute, End call, End all calls, Phone book, Menu and Hold or Unhold,

New call, Conference, Private, Answer and Reject.

Send DTMF is used to send DTMF tone strings, for example, passwords or bank

account numbers. Key in the DTMF string or search for it in the phone book and

press OK. Note that you can key in the wait character w and the pause character p

by repeatedly pressing

Swap is used to switch between the active call and the call on hold.

Transfer is used to connect a call on hold to an active call and to disconnect

yourself from the calls.

4. Writing text

You can key in text, for example, when writing messages, in two different ways,

using the traditional method, or another method called predictive text input.

When you are writing text, the predictive text input is indicated by

traditional text input by at the top left of the display. The character case is

indicated by Abc, abc, or ABC next to the text input indicator, and you can switch

the character case by pressing . The number mode is indicated by 123, and

and the

you can switch between the letter and number mode by pressing and holding

■ Setting predictive text input on or off

When writing text, press Options and select Dictionary.

• To set the predictive text input on, select a language in the dictionary options

list. Predictive text input is only available for the languages in the list.

• To change back to the traditional text input, select Dictionary off.

Tip: To quickly set the predictive text input on or off when writing text,

press

twice, or press and hold Options.

■ Using predictive text input

You can key in any letter from A through Z with a single keypress. The predictive

text input is based on a built-in dictionary to which you can also add new words.

1. Start writing a word by using the keys

through

. Press each key only

once for one letter. The word changes after each keystroke.

For example, to write Nokia when the English dictionary is selected, press

once for N,

once for o,

once for k,

once for i and

once for

To insert a number while in letter mode, press and hold the desired number key.

For more instructions on writing text, see Tips for writing text on page 39.

2. When you have finished writing the word and it is correct, confirm the word by

pressing

If the word is not correct, you have the following options:

• Press repeatedly until the word you want appears and confirm it.

or adding a space with

• Press Options and select Matches.

If the ? character is displayed after the word, the word you intended to write is

not in the dictionary. To add the word to the dictionary, press Spell, key in the

word (traditional text input is used) and press Save. When the dictionary

becomes full, the new word replaces the oldest one that was added.

3. Start writing the next word.

Writing compound words

Key in the first part of the word and confirm the word by pressing

. Write the

last part of the word and confirm the word by pressing

■ Using traditional text input

Press a number key,

through

, repeatedly until the character you want

appears. Not all of the characters available under a number key are printed on the

key. The characters available depend on the language selected in the Language

menu, see Language on page 78.

To insert a number while in letter mode, press and hold the desired number key.

• If the next letter you want is located on the same key as the present one, wait

until the cursor appears, or press

The most common punctuation marks and special characters are available

under the number key

and then key in the letter.

•

For more instructions on writing text, see Tips for writing text below.

■ Tips for writing text

You can also use the following keys for writing text:

• To insert a space, press

• To move the cursor to the right or left, press

, respectively.

• To delete a character to the left of the cursor, press Clear. Press and hold Clear

to delete the characters more quickly.

• To insert a special character when using traditional text input, press

when using the predictive text input, press and hold

, or press Options and

select Insert symbol.

Scroll through the list of characters and press Use to select a character.

To scroll through the list more quickly, press or , and

press to select a character.

• To insert a number while in letter mode, press Options and select Insert

number. Key in the numbers you want and press OK.

• To insert a name or a phone number by searching for it in the phone book, press

Options and select Insert name or Insert number.

• To insert a word when using predictive text input, press Options and select

Insert word. Write the word using the traditional text input and press Save. The

word is also added to the dictionary.

5. Using the menu

The phone offers you an extensive range of functions, which are grouped into

menus. Most of the menu functions are provided with a brief help text. To activate

the help texts, see Help text activation on page 80. To view the help text, scroll to

the menu function you want and wait for 15 seconds. To exit the help text, press

Back.

■ Accessing a menu function

By scrolling

1. To access the menu, press Menu.

2. Scroll through the menu and select, for example, Settings by pressing Select.

3. If the menu contains submenus, select the one you want, for example Call

settings.

4. If the selected submenu contains further submenus, repeat step 3. Select the

next submenu, for example Anykey answer.

5. Select the setting of your choice.

6. Press Back to return to the previous menu level, and Exit to exit the menu.

By shortcut

The menus, submenus and setting options are numbered and you can access them

by using their shortcut numbers. The shortcut number is shown in the top right

corner of the display.

• To access the menu, press Menu and within two seconds key in the index

number of the menu function you want to access.

For example, to set the Anykey answer On, press Menu,

and

■ List of menu functions

1. Phone book

1. Search

2. Add name

3. Edit name

4. Erase

5. Copy

6. Add number

7. Settings

1. Memory in use

2. Phone book view

3. Memory status

8. Speed dials

9. Voice tags

10.Info numbers¹

11.Service nos.¹

12.My numbers²

2. Messages

1. Write message

2. Chat

3. Inbox

1. Visible only if supported by your network.

2. Visible only if supported by your operator or service provider.

4. Multimedia inbox

5. Outbox

6. Archive

7. Templates

8. Pictures

9. My folders

10.Erase messages

1. All read

2. Inbox

3. Outbox

11.Voice messages

1. Listen to voice messages

2. Voice mailbox number

12.Info messages

13.Service command editor

14.Message settings

1. Text messages

2. Multimedia msg.

3. Call register

1. Missed calls

2. Received calls

3. Dialled numbers

4. Call duration

1. Last call duration

2. All calls’ duration

3. Received calls’ duration

4. Dialled calls’ duration

5. Clear timers

5. Call costs

1. Last call units

2. All calls’ units

3. Call cost settings

6. GPRS data counter

1. Data sent in last session

2. Data received in last session

3. All sent data

4. All received data

5. Clear counters

7. GPRS connection timer

1. Duration of last session

2. Duration of all sessions

3. Clear timers

8. Erase recent call lists

1. All

2. Missed

3. Dialled

4. Received

4. Tones

1. Tone settings

1. Incoming call alert

2. Ringing tone

3. Ringing volume

4. Vibrating alert

5. Message alert tone

6. Keypad tones

7. Warning tones

2. Tone services

5. Profiles

1. General

1. Activate

2. Personalise

3. Timed

2. Silent

3. Discreet

4. Loud

5. My style 1

6. My style 2

6. Settings

1. Time and date settings

1. Clock

2. Date

3. Auto-update of date & time

2. Call settings

1. Call divert

2. Anykey answer

3. Automatic redial

4. Speed dialling

5. Call waiting service

6. Summary after call

7. My number sending

8. Line for outgoing calls

3. Phone settings

1. Language

2. Automatic keyguard

3. Cell info display

4. Welcome note

5. Network selection

6. Confirm SIM service actions

7. Help text activation

8. Start-up tone

4. Accessory settings¹

1. Headset

2. Handsfree

3. Loopset

5. Security settings

1. PIN code request

2. Call barring service

3. Fixed dialling

4. Closed user group

5. Security level

6. Change of access codes

6. Restore factory settings

1. Shown only when an accessory has been used.

7. Games

1. Select game

1. Kart Racing

2. Space Impact II

3. Dance 2 Music

4. Link5

5. Bumper

2. Game services

3. Settings

1. Game sounds

2. Game lights

3. Shakes

4. Game controls

5. Club Nokia ID

8. Organiser

1. Alarm clock

2. Calendar

9. Tools

1. Screen saver

2. Calculator

3. Countdown timer

4. Stopwatch

10.Services

1. Home

2. Bookmarks

• Send

3. Service inbox

4. Settings

1. Active service settings

2. Edit active service settings

3. Appearance settings

4. Cookie settings

5. Authority certificates

6. Service inbox settings

5. Go to address

6. Clear the cache

11.SIM services¹

1. Only shown if supported by your SIM card. The name and contents vary depending on the SIM

card.

6. Menu functions

■ Phone book (Names - Menu 1)

You can save names and phone numbers in the phone’s memory (internal phone

book) or in the SIM card’s memory (SIM phone book).

• The internal phone book can save a maximum of 500 names with several

numbers and text notes for each name. The total number of names that can be

saved depends on the number of names and the phone numbers and text items

attached to them.

• The phone supports SIM cards that can save a maximum of 250 names and

phone numbers. Names and numbers saved in the SIM card’s memory are

indicated by

Selecting the phone book settings

1. Press Names or Menu and Phone book and then select Settings.

2. Select Memory in use, and select one of the following options:

Phone and SIM to recall names and numbers from both phone books. The

names and numbers will be saved in the phone’s memory.

Phone to use the phone’s internal phone book.

SIM card to use the SIM card’s phone book.

3. Select Phone book view and select one of the following options:

Name list to show three names at a time.

Name and no. to show one name and one phone number at a time.

4. Select Memory status. Select Phone or SIM card to see how many names and

phone numbers are currently saved and how many can still be saved in the

selected phone book.

Saving names and phone numbers (Add name)

Names and numbers will be saved in the memory currently being used, see

Selecting the phone book settings above.

1. Press Names or Menu and Phone book and select Add name.

2. Key in the name and press OK. See Writing text on page 37.

3. Key in the phone number and press OK. To key in the numbers, see Making a

call on page 33.

4. When the name and number are saved, press Done.

Tip: Quick save

In standby mode, key in the phone number. Press Options and select

Save. Key in the name and press OK.

Saving multiple numbers and text items per name

You can save a maximum of five phone numbers and four brief text items in the

phone’s internal phone book for each name. Text items saved under one name can

be for example street and e-mail addresses, a note and a web address.

The first number saved under a name is automatically set as the default number,

and is indicated by . When you select a name from the phone book, for

example, to make a call, the default number is used unless you select another

number.

1. Make sure that the memory in use is either Phone or Phone and SIM, since

multiple numbers and text items can only be saved in the phone’s memory. See

Selecting the phone book settings on page 50.

2. To access the list of names and phone numbers, press

mode.

in standby

3. Scroll to the name saved in the phone’s internal phone book to which you want

to add a new number or text item and press Details. (If the name is not saved in

the phone, the phone will ask you whether you want to save it there.)

4. Press Options and select Add number or Add detail.

5. Select one of the following number or text types:

General is the default type used when no other number type is set as the

default number. Other number types are

and Fax.

Text types are

Mobile,

Home,

Office

E-mail,

Postal addr., Note and

Web address:.

To change the number or text type, select Change type in the options list.

6. Key in the number or text item and press OK to save it.

7. Press Back and then Exit to return to standby mode.

Changing the default number

Press or in standby mode, scroll to the name you want and press Details.

Scroll to the number you want to set as the default. Press Options and select Set

as default.

Searching for a name in the phone book

1. Press Names or Menu and Phone book, then select Search.

2. Either press List to access the phone book or key in the first character(s) of the

name you are searching for and press Search. The matches appear with the

pop-up window.

3. Scroll to the name you want and press Details. Scroll to view the details of the

selected name.

Tip: To find a name and phone number quickly, press

standby mode. Key in the first letter(s) of the name, and/or scroll to the

name you want.

Editing a name, number or text item

Search for the name (and number) you want to edit and press Details. Scroll to the

name, number or text item you want to edit, and press Options. Select Edit name,

Edit number or Edit detail, edit the name, number or text and press OK.

Erasing names and numbers

Press Names or Menu and Phone book, and select Erase.

• To delete names and numbers one by one, select One by one and scroll to the

name (and number) you want to delete. Press Erase and press OK to confirm.

• To delete all names and numbers in the phone book at once, select Erase all

and then scroll to the phone book, Phone or SIM card and press Erase. Press OK

and confirm with your security code.

Copying phone books

You can copy names and phone numbers from the phone’s memory to your SIM

card’s memory and vice versa.

1. Press Names or Menu and Phone book, and select Copy.

2. Select the copying direction, From phone to SIM card or From SIM card to

phone.

3. Select One by one, All or Default nos.

• If you select One by one, scroll to the name you want to copy and press

Copy.

Default nos. is shown if you copy from the phone to the SIM card. Only the

default numbers will be copied, since your SIM card may not support multiple

numbers stored under one name.

4. To select whether you want to keep or erase the original names and numbers,

choose Keep original or Move original.

• If you select All or Default nos., press OK when Start copying? or Start

moving? is displayed.

Sending and receiving a business card

You can send and receive a person’s contact information as a business card as an

Over The Air (OTA) message, if supported by the network.

• Receiving a business card

When you have received a business card as an Over The Air (OTA) message,

press Show. Press Options and select Save to save the business card in the

phone’s memory, or Discard to discard the received business card.

• Sending a business card

You can send a person’s contact info as a business card to a compatible phone

or other compatible handheld device that supports the vCard standard.

1. Search the phone book for the name and phone number you want to send,

press Options and select Send bus. card.

2. To send the business card as an OTA message, select Via text msg.

Assigning a number to a speed dialling key

Press Names or Menu and Phone book and select Speed dials. Scroll to the speed

dialling key number you want.

• Press Assign and then Search. Select the name first and then the number you

want to assign to that key.

• If a number is already assigned to that key, press Options, and you can view,

change or erase the assigned number.

To make a call using the speed dialling keys, see Speed dialling a phone number on

page 34.

Voice dialling

You can make a phone call by saying a voice tag that has been added to a phone

number. You can add a maximum of 14 voice tags. Any spoken word(s), such as a

person’s name(s), can be a voice tag.

Before using voice dialling, note that:

•

Voice tags are not language dependent. They are dependent on the speaker's voice.

Voice tags are sensitive to background noise. Record them and make calls in a quiet

environment.

•

When recording a voice tag or making a call by saying a voice tag, hold the phone in the

normal position near to your ear.

Very short names are not accepted. Use long names and avoid similar names for different

numbers.

Note: You must say the name exactly as you said it when you recorded it. This may

be difficult in, for example, a noisy environment or during an emergency, so you

should not rely solely upon voice dialling in all circumstances.

Adding a voice tag

Save or copy the names and phone numbers to which you want to add a voice tag

in the phone’s memory.

You can also add voice tags to the names in the SIM card, but if you replace your

SIM card with a new one, you first need to delete the old voice tags before you can

add new ones.

1. In standby mode, press

2. Scroll to the name to which you want to add a voice tag and press Details.

Scroll to the phone number you want and press Options.

3. Select Add voice tag.

4. Press Start, and speaking clearly say the word(s) you want to record as a voice

tag. After recording, the phone plays the recorded tag.

5. When the voice tag has been successfully saved, Voice tag saved is displayed, a

beep sounds and a symbol

appears after the phone number with the voice

tag.

Making a call using a voice tag

When an application using the GPRS connection is sending or receiving data, you

cannot make a call using voice dialling. To make a call using a voice tag, end the

application using the GPRS connection.

1. In standby mode, press and hold Names. A short tone is heard and Speak now is

displayed.

2. Say the voice tag clearly.

3. The phone plays the recognised voice tag and then dials the phone number of

the voice tag after 1.5 seconds.

If you are using the headset, press and hold the headset key to start the voice

dialling.

Replaying, changing or erasing a voice tag

Press Namesand select Voice tags. Scroll to the name with the voice tag you want,

and press Options.

• To replay the voice tag, select Playback.

• To erase the voice tag, select Erase and press OK.

• To change the voice tag, select Change. Press Start to add the new voice tag.

Service numbers

You can call the service numbers of your service provider if the numbers are

included on your SIM card.

Press Names and select Service Nos. Scroll to a service number and press

call the number.

Ringing tone per name

You can assign a ringing tone to each phonebook memory entry. You can, for

example, assign the same ringing tone to all your friends or colleagues.

1. Press Names or Menu and Phone book, and scroll to the entry (name) to which

you want to assign a ringing tone.

2. Press Details and then Options. Select Assign tone and then choose the ringing

tone you want to assign to the entry. Note that Default means you will use the

same general ringing tone used in the active profile.

■ Messages (Menu 2)

You can read, write and send text and picture messages or save

your messages. All the messages in your phone’s message

memory are organised in folders.

Before you can send any text or picture messages, you need to save your message

centre number, see Text message settings on page 66.

You can also receive multimedia messages with text, ringing tones and graphics.

Multimedia messages will be dealt with in Receiving multimedia messages,

starting on page 67.

Writing and sending text messages

Your phone is able to send and receive multi-part messages comprised of several

ordinary text messages (network service). Invoicing is based on how many

ordinary messages are needed for a multi-part message.

The number of available characters and the current part number of a multi-part

message are shown at the top right of the display.

1. Press Menu, and select Messages and Write message.

2. Key in a message. See Writing text on page 37.

See also Inserting a text template into a message on page 61 and Inserting a

picture template into a message on page 61.

3. To send the message, press Options and select Send.

4. Enter the recipient’s phone number and press OK to send the message, or

search for the phone number in the phone book. Press OK to send the message.

Note: When sending messages via the SMS network service, your phone may

display the words "Message Sent". This is an indication that the message has been

sent by your phone to the message centre number programmed into your phone.

This is not an indication that the message has been received at the intended

destination. For more details about SMS services, check with your service provider.

Options for sending a message

After you have written a message, press Options, and select Sending options.

• To send a message to several recipients, select Send to many. When you have

sent the message to everyone you want to send it to, press Done.

• To send a message using a message profile, select Sending profile and then the

message profile you want to use.

For example, if you select a profile that you have defined for e-mail

transmission, key in or search the phone book for the recipient’s e-mail address

and press OK. Key in the e-mail service number and select Accept to send the

message.

To define a message profile, see Text message settings on page 66.

Text and picture templates

Press Menu, select Messages and Templates. The list of text templates, indicated

with

, and picture templates, indicated with

, is displayed.

Your phone offers you 10 picture message templates. You can also save new

pictures into the Templates folder. More pictures can be found on the Nokia

website, http://www.club.nokia.com.

Note: This function can be used only if it is supported by your network operator or

service provider. Only phones that offer picture message features can receive and

display picture messages.

• Each picture message is made up of several text messages. Therefore, sending

one picture message may cost more than sending one text message.

• Since picture messages are saved in the phone’s memory, you cannot view

them if you use your SIM card with another phone.

Inserting a text template into a message

When you are writing or replying to a message, press Options. Select Use template

and select the template that you want to insert.

Inserting a picture template into a message

When you are writing or replying to a message, press Options. Select Attach

picture and select a picture to view. Press Attach to insert the picture into your

message.

The

indicator on the header of the message indicates that a picture has been

attached. The number of characters that you can enter in a message depends on

the size of the picture.

To view the text and the picture together before sending the message, press

Options and select Preview.

Reading and replying to a text message

When you have received a text or picture message, the indicator

and the

number of new messages followed by messages received will appear on the

display.

The blinking

indicates that the message memory is full. Before you can

receive or send new messages, delete some of your old messages.

1. Press Show to view the message, or press Exit to view it later.

Reading the message later: Press Menu, select Messages and Inbox.

2. If more than one message is received, select the message you want to read. An

unread text message is indicated by

indicated by in front of it.

and an unviewed picture message is

3. While reading or viewing the message, press Options.

You can select an option to erase, forward, edit, move, and rename the

message you are reading. You can also change the font size of the message.

Select Copy to calend. to copy the message to your phone’s calendar as a

reminder note for the current day.

Select Details to view, for example, the sender’s name and phone number, the

message centre used, the date and time the message was received.

Select Use number to extract numbers from the current message.

Select Save picture to save the picture in the Templates folder.

Select Reply to reply to a message. Select Original text to include the original

message in the reply, or select standard answers, for example, Thank you or

Congrats or Template to be included in the reply, or select Empty screen.

4. Write your reply message.

5. Press Options, select Send and press OK to send the message to the displayed

number.

Inbox and outbox folders

After you have read an incoming text or picture message, the phone saves the

message in the Inbox folder of the Messages menu.

You can save a message that you want to send later in the Outbox or Archive

folder.

Erasing text messages

Press Menu, select Messages and select Erase messages.

To delete all the messages in a folder, scroll to the folder and press OK. Then press

OK when Erase all read messages from folder? is displayed.

To delete all read messages from all the folders, scroll to All read and press OK.

Then press OK when Erase read messages from all folders? is displayed.

Chat

You can have a conversation with other people using this faster text message

service. Messages sent or received during a chat session are not saved.

1. To start a chat, press Menu, select Messages and Chat. Key in or search the

phone book for the phone number of the person with whom you want to start

the chat session and press OK.

Another way to start a chat: When you have received a message, press Show

to read it. To start a chat, press Options and select Chat.

2. Key in your nickname for the chat and press OK.

3. Write your chat message, see Writing text on page 37.

4. To send the message, press Options and select Send.

5. The reply message from the other person is shown above your original

message. To reply to the message, press OK and repeat step 3.

To view the latest messages sent and received during the current chat session,

press Options and select Chat history. The messages you sent are indicated by "<"

and your nickname, and the messages you received by ">" and the sender’s

nickname. Press Back to return to the message you are writing.

To edit your nickname, select the option Chat name.

My folders and Archive folder

To organise your messages, you can add new folders and then move messages to

the new folder or to Archive folder.

To add or delete a folder, press Menu, select Messages and My folders.

• To add a folder, press Options and select Add folder.

• To delete a folder, scroll to the folder you want to delete, press Options and

select Delete folder.

To move a message to another folder, press Options while reading the message

you want to move. Select Move, scroll to the folder where you want to move the

message and press OK.

Voice messages

Voice mailbox is a network service and you may need to subscribe to it first. For

more information and for the voice mailbox number, contact your service

provider.

Press Menu, select Messages and Voice messages. Select

•

Listen to voice messages to call your voice mailbox at the phone number you

have saved within the Voice mailbox number menu. Note also that pressing

and holding

calls your voice mailbox.

Each phone line may have its own voice mailbox number, see Line for outgoing

calls on page 78.

•

Voice mailbox number to key in or edit your voice mailbox number and press

OK to save it.

If supported by the network, the indicator

will indicate new voice messages.

Press Listen to call your voice mailbox number.

Info messages

With the info message network service, you can receive messages on various

topics, for example weather or traffic conditions, from your service provider. For

available topics and relevant topic numbers, contact your service provider.

If the GPRS connection is set to Always online, the info messages may not be

received. In that case, set the GPRS connection to When needed, see Setting up

the phone for a WAP service on page 93.

Service command editor

Press Menu, select Messages and Service command editor. Key in and send service

requests (also known as USSD commands), such as activation commands for

network services, to your service provider.

Text message settings

Text message settings affect the sending of messages.

Press Menu, select Messages, Message settings and Text messages. If more than

one message profile set is supported by your SIM card, select the message profile

set that you want to change. Select

•

Message centre number to save the phone number of the message centre. You

need the message centre number to send text and picture messages. You

receive the number from your service provider.

•

Messages sent as to select the message format.

•

Message validity to set how long the network will attempt to send you a

message, for example, when your phone is turned off.

Default recipient number to save a default number to send messages for this

message profile.

Delivery reports to request the network to send delivery reports about your

messages (network service).

•

Use GPRS to set GPRS as the preferred SMS bearer.

Reply via same centre to allow the recipient of your message to send you a

reply via your message centre (network service)

•

Rename sending profile to change the name of the selected message profile.

■ Receiving multimedia messages

The multimedia messaging service enables you to receive multimedia messages.

These messages can contain text, graphics and sound parts. The graphic part can

be saved for use as a screen saver, and the sound part can be saved for use as a

ringing tone.

You can store three Multimedia messages in the Multimedia inbox. Graphic parts

can be saved in the Pictures folder and sound parts in the ringing tone list. See

Viewing multimedia messages on page 69.

The following formats are supported:

• Text: Unicode

• Graphic: GIF87, GIF89a, BMP, PNG, OTA-BMP, JPEG and WBMP

• Sound: Polyphonic sound (MIDI)

If a received message contains any unsupported elements, they are replaced by a

fixed text Object format not supported.

The size of the multimedia message can be a maximum of 30 KB. If the size of the

message exceeds 30 KB, you will not be able to receive the message. Depending on

your network operator or service provider, you may receive an SMS, which

contains an Internet address where you can view the multimedia message. If the

multimedia message contains images larger than the display, the phone scales

them down to fit the display area.

Note: The default setting of the multimedia message service is on (Allow

multimedia reception is set to Yes), and your operator or service provider may

charge you for every message you receive.

Multimedia messaging settings

Press Menu, select Messages, Message settings and Multimedia msg.. Select

•

Allow multimedia reception - choose No, Yes or Home network to use the

multimedia service. If you choose Home network, you cannot receive

multimedia messages when outside your own network.

•

Incoming multimedia messages - choose one of the following:

•

Reject not to receive multimedia messages, and a notification of this is sent

to the network.

•

Retrieve to receive multimedia messages.

•

Allow adverts to receive or reject adverts.

•

Connection settings - you can define WAP connection settings for retrieving

multimedia messages. You can edit the settings (Edit active multimedia

settings) or activate them (Active multimedia settings). For more information

on editing the settings, see Mobile Internet services, WAP (Menu 10) on page

92.

Viewing multimedia messages

When you have received a multimedia message, the text Multimedia message

received is shown.

Viewing the received message

Press Show to view the message, or press Exit to delete it.

Note that if you press Exit, you cannot view the message later. If you want to view

the message later, you have to save it by pressing Show, Options and then

selecting Save message.

You also have the following options available when you press Options:

•

Play to listen to a sound clip.

Save tone to save a sound part in the ringing tone list.

Discard to delete a message.

Details to view the message subject, size and class.

Save image to save the attached image, for example, to be used as a screen

saver.

Viewing a saved message

Press Menu, select Messages and Multimedia inbox. Select the message you want

to read.

When viewing the message, press Options. Select

•

Play to listen to a sound clip.

Save tone to save the sound part in the ringing tone list.

Details to view the message subject, size and class.

Erase message to delete the message.

Save image to save the attached image, for example, to be used as a screen

saver.

■ Call register (Menu 3)

The phone registers the phone numbers of missed, received and

dialled calls, and the approximate length and cost of your calls.

The phone registers missed and received calls only if the network supports these

functions, the phone is switched on and within the network’s service area.

When you press Options in the Missed calls, Received calls and Dialled numbers

menus, you can view the date and the time of the call, edit or erase the phone

number from the list, save the number in the phone book, or send a message to the

number.

Missed calls and received calls

To view a list of the last ten phone numbers from which somebody has tried to call

you (network service), press Menu, select Call register and Missed calls.

Tip: When a note about missed calls is being displayed, press List to

access the list of phone numbers. Scroll to the number you would like to

call back and press

To view a list of the last ten phone numbers from which you have most recently

accepted calls (network service), press Menu, select Call register and Received

calls.

Dialled numbers

To view a list of the 20 phone numbers that you have most recently called or

attempted to call, press Menu, select Call register and Dialled numbers. See also

Last number redialling on page 33.

Erase recent call lists

To erase the recent calls lists, press Menu, select Call register and select Erase

recent call lists. Select whether you want to delete all the phone numbers in the

recent call lists, or only the numbers in the missed calls, received calls or dialled

numbers lists. You cannot undo the operation.

Call counters and call timers

Note: The actual invoice for calls and services from your service provider may vary,

depending upon network features, rounding-off for billing, taxes and so forth.

Press Menu and select Call register. Select

•

Call duration and scroll to view the approximate duration of your incoming

and outgoing calls in hours, minutes and seconds. To clear the timers, your

security code is needed.

Each phone line has its own call timers and the timers of the selected line are

displayed. See Line for outgoing calls on page 78.

•

Call costs (network service) and select Last call units or All calls’ units to check

the cost of your last call or all calls.

Select Call cost settings and then select Clear counters or Show costs in to set

the phone to show the remaining talk time in terms of charging units, Units, or

units of currency, Currency. Contact your service provider for charging unit

prices. Select Call cost limit to limit the cost of your calls to a certain amount

of charging units or units of currency. The PIN2 code is needed for the call cost

settings.

Note: When no more charging units or currency units are left, calls may only be

possible to the emergency number programmed into your phone (e.g. 112 or other

official emergency number).

•

GPRS data counter and scroll to check the amounts of data that were most

recently sent and received, data sent and received in total, and to clear the

counters. The counter unit is a byte.

•

GPRS connection timer and scroll to check the duration of the last GPRS

connection or the total duration of GPRS connection. You can also clear the

timers.

■ Tones (Menu 4)

Press Menu, select Tones and Tone settings. You can find the

same settings in the Profiles menu, see Profiles (Menu 5) on page

74.

Select Incoming call alert to choose how the phone notifies you of an incoming

voice call. The options are Ringing, Ascending, Ring once, Beep once and Off.

Select Ringing tone, Ringing volume and Vibrating alert for an incoming voice call

and an incoming message. The vibrating alert does not work when the phone is

connected to a charger, desktop stand or a car kit.

Select Message alert tone to set the alert tone for incoming messages, Keypad

tones, or Warning tones to set the phone to sound tones, for example, when the

battery is running out of power.

If you receive a traditional ringing tone as an OTA message, you can save it in the

ringing tone list. You can also download polyphonic ringing tones from a

predefined WAP site using the Tone services submenu, or via MMS. The number of

ringing tones you can savein the ringing tone list depends on the size of an

individual ringing tone. If there is no free space for ringing tones, you can replace

a previously stored ringing tone with the received one. The ringing tone list

contains both traditional and polyphonic ringing tones.

■ Profiles (Menu 5)

Your phone has various setting groups, or profiles, for which you

can customise the phone tones for different events and

environments. First, personalise the profiles to your liking and then you only need

to activate a profile to use it.

Available profiles are General, Silent, Discreet, Loud, My style 1, and My style 2.

Press Menu and select Profiles. Scroll to a profile and press Select.

• To activate the profile, select Activate.

Tip: To quickly change the profile in standby mode, press the power

key

, scroll to the profile you want to activate and press Select.

• To set the profile to be active for a certain amount of time up to 24 hours,

select Timed and set the desired time length. When the time set for the profile

expires, the previous profile that was not timed, becomes active.

• To personalise the profile, select Personalise. Select the setting you want to

change and make the changes.

For the currently active profile, the settings can also be changed in the Tones

menu, see Tones (Menu 4)on page 73. In addition, you can rename a profile,

Profile name. The General profile cannot be renamed.

■ Settings (Menu 6)

Time and date settings

Clock settings

Press Menu, select Settings, Time and date settings and Clock. Select

•

Show clock (Hide clock) and the time is shown on the top right of the display

when the phone is in standby mode.

•

Set the time, key in the correct time and press OK.

Time format and set the 12-hour or 24-hour time format.

The clock also serves the functions Messages, Call register, Alarm clock, timed

Profiles and Calendar.

If the battery is removed from the phone for more than a few minutes, you may

need to set the time again.

Date settings

Press Menu, select Settings, Time and date settings and Date. Select

•

Set the date to give the current date.

Date format to choose how the date is displayed.

Automatic update of date and time

Select Auto-update of date & time and On to set the phone to automatically

update the time and date according to the current time zone. To set the phone to

ask for confirmation before the update, select Confirm first.

Call settings

Call divert

Press Menu, select Settings, Call settings and Call divert (network service). With

call divert, you can direct your incoming calls to another number, for example, to

your voice mailbox number. For details, contact your service provider. Divert

options that are not supported by your SIM card or your network operator may not

be shown.

Select the divert option you want, for example, select Divert if busy to divert voice

calls when your number is busy or when you reject an incoming call.

To activate the divert setting, select Activate, to deactivate the divert setting,

select Cancel, or Check status to check whether the divert is activated or not. To

change the timeout during which the call is diverted, first select Set delay, if this is

available for the divert option, and then select Activate to turn the divert setting

on.

To cancel all the active call diverts at once, select the option Cancel all diverts.

To see the divert indicators in standby mode, see Standby mode on page 22.

Anykey answer

Press Menu, select Settings, Call settings and then Anykey answer. Select On and

you can answer an incoming call by briefly pressing any key, except

and

Automatic redial

Press Menu, select Settings, Call settings and Automatic redial. Select On and your

phone will make a maximum of ten attempts to connect the call after an

unsuccessful call attempt.

Speed dialling settings

Press Menu, select Settings, Call settings and Speed dialling. Select On and the

names and phone numbers connected to the speed dialling keys, from

, can be dialled by pressing and holding the corresponding number key. See

Assigning a number to a speed dialling key on page 55.

Note that speed dialling will be activated automatically when you save the first

speed dialling entry, if speed dialling has not been activated already.

Call waiting service

Press Menu, select Settings, Call settings and Call waiting service. Select Activate

and the network will notify you of an incoming call while you have a call in

progress (network service). See Call waiting on page 35.

Summary after call

Press Menu, select Settings, Call settings and Summary after call. Select On and

the phone will briefly display the duration and cost (network service) of the last

call.

My number sending

Press Menu, select Settings, Call settings and My number sending. Select On and

your phone number will be displayed to the person you are calling (network

service). Select Set by network to reset the phone to the setting that you have

agreed upon with your service provider.

Line for outgoing calls

Line for outgoing calls is a network service to select the phone line (that is,

subscriber number) 1 or 2 for making calls.

Press Menu, select Settings, Call settings and Line for outgoing calls. If you select

Line 2 and have not subscribed to this network service, you will not be able to

make calls. However, calls on both lines can be answered regardless of the

selected line.

If supported by your SIM card, you can prevent the line selection by selecting the

option Lock.

For more information on availability, contact your network operator or service

provider.

Tip: In standby mode, you can switch from one line to the other by

pressing and holding

Phone settings

Language

Press Menu, select Settings, Phone settings and Language. Select the language for

the display texts. If Automatic is selected, the phone selects the language

according to the information on the SIM card.

Keyguard settings

Press Menu, Settings, Phone settings and Automatic keyguard. Select On to

activate the keyguard on and select the time after which the keypad

automatically locks.

Cell info display

Press Menu, select Settings, Phone settings and Cell info display. Select On to set

the phone to indicate when it is used in a cellular network based on Micro Cellular

Network (MCN) technology.

If the GPRS connection is set to Always online, the info messages may not be

received. In that case, set the GPRS connection to When needed, see Setting up

the phone for a WAP service on page 93.

Welcome note

Press Menu, select Settings, Phone settings and Welcome note. Key in the note

you would like to be shown briefly when the phone is switched on. To save the

note, press Options, and select Save.

Network selection

The cellular network to which your phone is connected can be selected either

manually or automatically.

Press Menu, select Settings, Phone settings and Network selection. Select

Automatic and the phone automatically selects one of the cellular networks

available in your area.

If you select Manual, the phone shows a list of the available networks and you can

select a network that has a roaming agreement with your home network operator.

Otherwise, No access will be displayed and you must select another network. The

phone stays in manual mode until the automatic mode is selected or another SIM

card is inserted into the phone.

Confirm SIM service actions

See SIM services (Menu 11) on page 105.

Help text activation

To set the phone to show or not to show the help texts, press Menu, select

Settings, Phone settings and Help text activation.

See also Using the menu on page 41.

Start-up tone

To set the phone to play or not to play a start-up tone when the phone is switched

on, press Menu, select Settings, Phone settings and Start-up tone.

If you have set a welcome note, the start-up tone will not be played, see Welcome

note on page 79.

Accessory settings

The accessory settings menu is shown only if the phone is or has been connected

to one of the following accessories: headsets HDC-5 or HDE-2, loopset LPS-3 or

handsfree car kits PPH-1 or CARK 125.

Press Menu, select Settings and Accessory settings. Select Headset, Handsfree or

Loopset.

• Select Default profile to select the profile you want to automatically activate

when you connect the selected accessory. You can select another profile while

the accessory is connected.

• Select Automatic answer to set the phone to automatically answer an

incoming call after five seconds. If the Incoming call alert is set to Beep once or

Off, automatic answer will not be used.

• Select Lights to set the lights permanently on, On. Select Automatic to switch

the lights on for 15 seconds after a keypress. The Lights option is only available

when Handsfree is selected.

• Select Use loopset to use the loopset instead of the headset,Yes. Use loopset is

available only when Loopset is selected.

Security settings

Note: When security features, which restrict calls, are in use (call barring, closed

user group and fixed dialling), calls may be possible to certain emergency numbers

in some networks (e.g. 112 or other official emergency number).

Press Menu, select Settings and Security settings. Select

•

PIN code request to set the phone to ask for your PIN code every time the

phone is switched on. Some SIM cards do not allow the PIN code request to be

turned off.

•

Call barring service (network service) to restrict incoming calls to and outgoing

calls from your phone. A barring password is required.

•

Fixed dialling to restrict your outgoing calls to selected phone numbers, if this

function is supported by your SIM card. The PIN2 code is required.

Closed user group. Closed user group is a network service that specifies the

group of people whom you can call and who can call you. For more information

contact your network operator or service provider.

•

Security level. Select Phone and the phone will ask for the security code

whenever a new SIM card is inserted into the phone.

Select Memory and the phone will ask for the security code whenever you

want to select the phone’s internal memory or to copy from one memory to

another. Note that the selected memory has to be the SIM card memory. See

Selecting the phone book settings on page 50 and Copying phone books on

page 54.

•

Change of access codes and you can change security code, PIN code, PIN2 code

or barring password. Codes can only include numbers from 0 to 9.

Note that you should avoid using access codes similar to emergency numbers,

such as 112, to prevent accidental dialling of an emergency number.

Restore factory settings

To reset some of the menu settings to their original values, press Menu, select

Settings and Restore factory settings. Key in the security code and press OK. For

example, the names and phone numbers saved in the phone book are not deleted.

■ Games (Menu 7)

Note: The phone must be switched on to use this function. Do

not switch on the phone when the use of a wireless phone is prohibited or when it

may cause interference or danger.

Starting a game

Press Menu, select Games and Select game. Select the game you would like to

play: Kart racing, Space Impact II, Dance 2 Music, Link5 or Bumper. If available for

the game, select the game type and then New game.

You can read instructions on how to use the keys and how the game works by

selecting Instructions from the submenu.

Game services and game settings

Press Menu, select Games and Game services or Settings. Select

•

Game services and the phone will try to connect to the WAP pages of Club

Nokia by using the currently active service settings.

If the connection fails, you may not be able to access Club Nokia from the WAP

service whose connection settings are currently active. In this case, enter the

Services menu and activate another set of service settings, see Making a

connection to a WAP service on page 96. Try again to connect to Club Nokia.

For the availability of different WAP services, pricing and tariffs, contact your

network operator and/or WAP service provider.

•

Settings to set sounds, lights and vibrator, Shakes, for the game. . You can save

your Club Nokia membership number, Club Nokia ID. For more information on

Club Nokia and the game services, visit www.club.nokia.com. Availability may

vary by country.

Under Settings select Game controls and

•

Default to activate the optimised game settings when you are not using the

games cover.

•

Games cover to activate the optimised game settings when you are using

the games cover.

■ Organiser (Menu 8)

Alarm clock

The alarm clock uses the time format set for the clock. The alarm clock works even

when the phone is switched off.

Press Menu, select Organiser and Alarm clock. Key in the alarm time and press OK.

To change the time when the alarm time is set, select On.

When the alarm time expires

The phone will sound an alert tone, and flash Alarm! and the alarm time on the

display.

Press Stop to stop the alarm. If you let the phone continue to alarm for a minute

or press Snooze, the alarm stops for a few minutes and then resumes.

If the alarm time is reached while the phone is switched off, the phone switches itself on and

starts sounding the alarm tone. If you press Stop, the phone asks whether you want to

activate the phone for calls. Press No to switch off the phone or Yes to make and receive

calls.

Note: Do not press Yes when wireless phone use is prohibited or when it may cause

interference or danger.

Calendar

The calendar helps you to keep track of reminders, calls that you need to make and

birthdays. The phone can sound an alarm tone when the set date for an event is

reached, if you have set an alarm for the note.

Note: The phone must be switched on to use this function. Do not switch on the

phone when the use of a wireless phone is prohibited or when it may cause

interference or danger.

Press Menu, select Organiser and Calendar. Scroll to the day you want. If you

want to see the day’s notes, press Options and select Day notes. The note indicator

is shown on the first line. You can view a single note by scrolling to it in day view,

then pressing Options and View. The week view shows four weeks at a time.

The other options for the calendar views may include:

• Options for making a note, for sending a note directly to another phone’s

calendar or as a text message.

• Options for erasing, editing, moving and repeating a note and for copying a

note to another day.

•

Settings to set, for example, the date, time, date format or time format. In the

Auto-erase option, you can set the phone to automatically delete old notes

after a specified time. However, the repeat notes, for example, birthday notes,

will not be deleted.

Making a calendar note

For keying in letters and numbers, see Writing text on page 37.

Press Menu, select Organiser and Calendar. Scroll to the date you want, press

Options and select Make a note. Select one of the following note types:

•

Reminder - Key in the note, press Options and Save. Choose whether you

want an alarm for the reminder, and enter the time if you wish.

Call - Key in the phone number and press Options and Save. You can also

search for the number in the phone book by pressing Options and Search. Then

key in the time for the call and press OK. If you wish, select With tone to set an

alarm for the note, and the time for the alarm.

•

Birthday - Key in the person’s name (or search for it in the phone book by

pressing Options and Search), press Options and Save. Then key in the year of

birth, and press OK. If you key in the year, the note shows you the person’s age

after their name. If you wish, select With tone to set an alarm for the note, and

the time for the alarm.

When a tone alert is set, the indicator

is displayed when you view the notes.

When the phone alarms for a note

The phone beeps and displays the note. With a call note

on the display, you can

call the displayed number by pressing

. To stop the alarm and view the note,

press View. To stop the alarm without viewing the note, press Exit.

■ Tools (Menu 9)

Screen saver

The screen saver can be a still picture, an animation or a clock.

1. To set a screen saver on for a profile, press Menu, select Profiles, then the

profile you want, select Personalise, Screen saver and On.

To use a screen saver for the currently active profile, press Menu, select Tools,

Screen saver and On.

2. To select a screen saver picture for a profile, press Menu, select Profiles, then

the profile you want, select Personalise, Screen saver and Screen savers. You

can also select a screen saver picture for the currently active profile by

pressing Menu, and then selecting Tools, Screen saver and Screen savers..

Choose either of the following:

• Pictures: Choosing Pictures will give you a list of pictures, possibly

animated, that you can choose as the screen saver by pressing Options and

Select. You can also preview the picture by selecting Preview.

Note that when using an animated screen saver, the phone’s power

consumption is increased.

• Clocks: Choosing Clocks lets you choose an analogue or digital clock as the

screen saver.

To deactivate the screen saver for a profile, press Menu, select Profiles, the profile

you want, Personalise, Screen saver and Off. You can also deactivate the screen

saver for the currently active profile by pressing Menu, select Tools, Screen saver

and Off.

Screen saver activation timeout

To set the time length after which the screen saver will activate, press Menu,

select Profiles, the profile you want, Personalise, Screen saver and Timeout. Or to

set the timeout for the currently active profile, press Menu, select Tools, Screen

saver and Timeout. You can choose the time from the list or key in any time you

want by choosing Other.

Receiving screen savers via MMS or picture messaging

You can receive animated or still pictures that you can use as screen savers via the

multimedia messaging service (MMS) or picture messaging service (GMS). The

pictures are saved in the Pictures folder under Messages. To use a picture as a

screen saver, scroll to the picture you want, and press Options and then select Use

as s. saver.

Calculator

The calculator in your phone adds, subtracts, multiplies, divides, calculates the

square and the square root and converts currency values.

Note: The phone must be switched on to use this function. Do not switch on the

phone when the use of a wireless phone is prohibited or when it may cause

interference or danger.

This calculator has a limited accuracy and rounding errors may occur, especially in

long divisions.

1. Press Menu, select Tools and Calculator.

2. When ’0’ is displayed on the screen, key in the first number in the calculation,

press

for a decimal point.

3. Press Options and select Add, Subtract, Multiply, Divide, Square, Square root or

Change sign.

Tip: Alternatively, press

once to add, twice to subtract, three

times to multiply or four times to divide.

4. Key in the second number.

5. For a total, press Options and select Equals. Repeat steps 3 to 5 as many times

as is necessary.

6. To start a new calculation, first press and hold Clear.

Making a currency conversion

1. Press Menu, select Tools and Calculator.

2. To save the exchange rate, press Options and select Exchange rate. Select

either of the displayed options. Key in the exchange rate, press

for a

decimal point and press OK. The exchange rate remains in the memory until

you replace it with another one.

3. To make the currency conversion, key in the amount to be converted, press

Options and select In domestic or In foreign.

You can also make the currency conversion in standby mode. Key in the amount to

be converted, press Options and select In domestic or In foreign.

Countdown timer

Press Menu, select Tools and Countdown timer. Key in the alarm time in hours and

minutes and press OK to start the countdown timer. If you like, write your own

note, which is displayed when the time expires, and press OK. When the timer is

running, the indicator

is shown in standby mode.

If the alarm time is reached when the phone is in standby mode, the phone sounds

a tone and flashes either the note, or if a note has not been set, Countdown time

up. Stop the alarm by pressing OK. If no key is pressed, the alarm stops after 30

seconds. Press OK to erase the note.

To stop the countdown timer or to change the countdown time:

Press Menu, select Tools and Countdown timer. Select Change time to set the

timer again, or Stop timer to stop the timer.

Stopwatch

You can measure time, take intermediate times or lap times by using the

stopwatch. During timing, the other functions of the phone can be used.

Using the stopwatch consumes the battery and the phone’s operating time will be reduced.

Be careful not to let it run in the background when performing other operations with your

phone.

Time observation and time splitting

1. Press Menu, select Tools, Stopwatch and Split timing.

You can select Continue if the timing was set in the background, for example,

because of an incoming call.

2. Press Start to start the time observation. Press Split every time you want to

take an intermediate time. The intermediate times are listed below the running

time on the display. Scroll to view the times.

3. Press Stop to stop the time observation.

4. Press Options and select

•

Start to start the time observation again. The new time is added to the

previous time.

Save to save the time. Key in a name for the measured time and press OK. If

no name is keyed in, the total time is used as a title.

Reset to reset the time without saving it.

Lap times

Press Menu, select Tools, Stopwatch and Lap timing. Press Start to start the time

observation and Lap to take a lap time. Press Stop to stop the lap timing. Press

Options and you can save or reset the lap times. Refer to Time observation and

time splitting on page 91.

Viewing and erasing times

Press Menu, select Tools and Stopwatch.

If the stopwatch is not reset, you can select Show last to view the most recently

measured time. Select View times. and a list of names or final times of the time

sets is shown, select the time set you want to view.

To delete the saved times, press Options and select Erase times. Select All at once

and press OK, or select One by one and scroll to the times you want to delete. Press

Erase and press OK.

■ Mobile Internet services, WAP (Menu 10)

See also WAP (Wireless Application Protocol) on page 20.

Note: The phone must be switched on to use this function. Do

not switch on the phone when the use of a wireless phone is prohibited or when it

may cause interference or danger.

The WAP services use Wireless Mark-Up Language (WML) on their WAP pages.

Web pages using the Hyper Text Mark-Up Language (HTML) cannot be viewed on

your phone.

Basic steps for accessing and using WAP services

1. Save the service settings that are needed to access the WAP service that you

want to use. See Setting up the phone for a WAP service on page 93 and

Appearance settings of the WAP browser on page 100.

2. Make a connection to the given WAP service. See Making a connection to a

WAP service on page 96.

3. Start browsing the pages of the WAP service. See Browsing the pages of a WAP

service on page 98.

4. Once you have finished browsing, end the connection to the WAP service. See

Ending a WAP connection on page 100.

Setting up the phone for a WAP service

You may receive the service settings directly to your phone from the network

operator or service provider that offers the WAP service that you want to use. For

more information, contact your network operator or service provider, or visit Club

Nokia’s Web site (www.club.nokia.com).

You can also key in the settings manually. For the appropriate settings, contact

your network operator or service provider. The WAP settings may be available, for

example, on the Web site of the network operator or service provider.

Saving the service settings received as a text message

When you receive the service settings as a text message, Service settings received

is displayed.

• To save and activate the received settings, press Options and select Save.

If no settings are saved in Active service settings, the settings are saved under

the first free connection set and also activated.

• To discard the received settings, press Options and select Discard.

• To view the received settings first, press Options and select View. To save the

settings, press Save.

Keying in the service settings manually

1. Press Menu, select Services and Settings.

2. Select Active service settings.

You need to activate the set in the same place where you want to save the

service settings. A set is a collection of settings needed for making a

connection to a WAP service.

3. Scroll to the set you want to activate and press Activate.

4. Select Edit active service settings.

Select each of the service settings one by one and key in all the required

settings.

•

Settings’ name - Key in the new name for the connection set and press OK.

Homepage - Key in the homepage address of the WAP service that you

want to use, press

for a period and press OK.

•

Session mode - Select Permanent or Temporary.

Connection security - Select On or Off.

When the connection security is On, the phone tries to use a secure

connection to the WAP service. If a secure connection is not available, the

connection will not be made. If you wish to connect anyway, with a non-

secure connection, you must set the connection security to Off.

•

Data bearer - Select GSM data or GPRS. For settings for the selected bearer,

see Settings when GSM data is the selected data bearer below and Settings

when GPRS is the selected data bearer, below.

For pricing, connection speed and other information, contact your network

operator or service provider.

Settings when GSM data is the selected data bearer

•

Dial-up number - Key in the phone number and press OK.

•

IP address - Key in the address, press

for a dot and press OK. You can

obtain the IP address from your network operator or service provider.

•

Authentication type - Select Secure or Normal.

Data call type - Select Analogue or ISDN.

Data call speed - Select the speed you want to use, or select Automatic.

Automatic is available only if the currently selected data call type is Analogue.

The actual data call speed depends on the service provider.

•

type uses the user name and password keyed in for the following settings. If

you select Manual, the login information must be entered when establishing a

connection.

•

User name - Key in the user name and press OK.

Password - Key in the password and press OK.

Settings when GPRS is the selected data bearer

•

GPRS connection - Select Always online or When needed.

If you select Always online, the phone is automatically registered to a GPRS

network when you switch the phone on. Starting a WAP or PC dial-up

application creates the connection between phone and network and data

transfer is possible. When you end the application, GPRS connection is ended

but the registration to the GPRS network remains.

If you select When needed, the GPRS connection is established when you

connect to a WAP service and closed when you end the WAP connection.

•

GPRS access point - Key in the access point name and press OK.

An access point name is needed to establish a connection to a GPRS network.

You can obtain the access point name from your network operator or service

provider.

IP address - Key in the address, press

for a period and press OK. You can

obtain the IP address from your network operator or service provider.

•

Authentication type - Select Secure or Normal.

connection is set to Always online, the Always online connection will be

disabled.

•

User name - Key in the user name and press OK.

Password - Key in the password and press OK.

Making a connection to a WAP service

Firstly, make sure that the service settings of the WAP service you want to use are

activated. To activate the settings:

• Press Menu, select Services and Settings. Select Active service settings and

scroll to the set you want to activate and press Activate.

Secondly, make a connection to the WAP service. There are three ways to connect:

• Open the homepage of the WAP service:

Press Menu, select Services and Home.

Tip: To open the homepage of a WAP service quickly:

In standby mode, press and hold

• Select a bookmark of the WAP service:

Press Menu, select Services, Bookmarks and select a bookmark.

If the bookmark does not work with the currently active service settings,

activate another set of service settings and try again.

• Key in the address of the WAP service:

Press Menu, select Services and then Go to address. Key in the address of the

WAP service, press

for special characters and press OK.

Note that it is not necessary to add the prefix http:// in front of the address

since it will be added automatically.

Browsing the pages of a WAP service

After you have made a connection to the WAP service, you can start browsing its

WAP pages. The function of the phone keys may vary in different WAP services.

Follow the text guides on the phone display. For more information, contact your

WAP service provider.

Note that if GPRS is selected as the data bearer, the indicator is shown on the

top left of the display during browsing. If there is an incoming (or outgoing) call

during a GPRS connection, the indicator

display. The GPRS connection is suspended.

is shown on the top right of the

General guidelines for using the phone keys

• Use the scroll keys or to browse the WAP page.

• To select a highlighted item, press

• To enter letters and numbers, press the keys

characters, press the key.

and to enter special

• Some or all of the following options are available while a WAP connection is in

progress. Press Options and select the option you want.

Home - to go back to the homepage of the WAP service

Bookmarks - the list of bookmarks is displayed. For details, see Bookmarks on

page 101.

Edit/Open row/Open link/Open list - to key in text or select a highlighted item

on the WAP page.

Add bookmark - to add the current WAP page as a bookmark in your bookmarks

list.

Go to address - to key in the address of the WAP service you wish to connect to.

Service inbox - a list of service messages is displayed, see Service inbox on page

102.

Appear. sett. - for details, see Appearance settings of the WAP browser on page

100.

Cookie settings - for details, see Download settings on page 101.

Use number - to copy a number from the current WAP page for saving or

calling (which ends the WAP connection). If the WAP page contains several

numbers, you may select the desired one.

Reload - to reload and update the current WAP page.

Clear the cache - for details, see The cache memory on page 103.

Security info - to view security information about the current WAP connection

and the server.

Quit - to quit browsing and end the call.

The options may also include links provided by the service provider.

WAP direct calling

Certain WAP pages support functions that you can access while browsing. This is

indicated on the WAP page. You may, for example, be able to

• make a voice call while you are on a WAP page.

• send DTMF tones while a voice call is in progress.

• save in the phone book a name and a phone number from a WAP page.

The phone asks for a confirmation before carrying out the function.

Ending a WAP connection

When you are using a WAP service, press Options and select Quit. When Quit

browsing? is shown, press Yes.

Alternatively,

• When GPRS is the selected bearer: Press

once to exit the WAP menu. The

twice to first end the

GPRS connection remains active.

• When GSM data is the selected bearer: Press

connection and then exit the WAP menu.

Appearance settings of the WAP browser

1. When no WAP connection is in progress

• Press Menu, select Services, Settings and Appearance settings.

When a WAP connection is in progress

• Press Options and select Appear. sett..

2. Select Text wrapping or Show images.

3. Select On or Off for Text wrapping and Yes or No for Show images.

When Text wrapping is set to On, the text continues onto the next line if it

cannot be shown on one line.

100

When Show images is set to No, the pictures appearing on the WAP page are

not shown. This can speed up the browsing of WAP pages that contain a lot of

pictures.

Download settings

You can set the phone to allow or prevent the phone receiving cookies.

A cookie is data that a WAP site saves in your phone’s browser cache memory. The

data can be, for example, your user information or your browsing preferences.

Cookies will be saved until you clear the cache memory, see The cache memory on

page 103.

1. When no WAP connection is in progress

• Press Menu, select Services, Settings and Cookie settings.

When a WAP connection is in progress

• Press Options and select Cookie settings.

2. Select Cookies and select Allow or Reject to allow or prevent the phone

receiving cookies.

Bookmarks

You can save a maximum of 50 WAP page addresses as bookmarks in the phone’s

memory.

1. When no WAP connection is in progress

• Press Menu, select Services and then Bookmarks.

101

When a WAP connection is in progress

• Press Options and select Bookmarks.

2. Scroll to the bookmark you want to use and press Options.

3. Select one of the following options:

Go to to make a connection to the WAP page associated with the bookmark.

Edit or Erase to modify or delete the selected bookmark.

Send to send the selected bookmark to another phone via SMS.

New bookmark to create a new bookmark without a connection to a WAP

service. Key in the address and the title of the WAP page and press OK.

Note that your phone may have some pre-installed bookmarks for sites not

affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose

to access them, you should take the same precautions, for security or content, as

you would with any site.

Receiving a bookmark

When you have received a bookmark from a compatible phone, press Options and

select View to view the bookmark, Save to save the bookmark, or Discard to

discard it.

Service inbox

The phone can receive service messages (pushed messages) sent by your service

provider. Service messages are notifications of, for example, news headlines, and

they may contain an address of a WAP service.

102

1. To access the service inbox when no WAP connection is in progress

When you have received a service message, 1 service message received will be

displayed. Press View to access the Service inbox.

If you press Exit, the message is moved to the Service inbox. To access the

Service inbox later, press Menu, select Services, and then Service inbox.

When a WAP connection is in progress

Press Options and select Service inbox.

2. Scroll to the message you want and press Options.

Select Retrieve to activate the browser and download the contents of the

service message.

Select Details to display detailed information on the service notification.

Select Erase to delete the selected service notification.

To set the phone to receive service messages

Press Menu, select Services, Settings, Service inbox settings and Service messages.

To set the phone to receive service messages, select On. If you select Off, the

phone will not receive service messages.

The cache memory

Note: The information or services you have accessed are stored in the cache of

your phone. A cache is a buffer memory, which is used to store data temporarily. If

you have tried to access or have accessed confidential information requiring

passwords (for example, your bank account), empty the cache of your phone after

each use.

103

To clear the cache memory when no WAP connection is in progress

• Press Menu, select Services, and Clear the cache.

To clear the cache memory when a WAP connection is in progress

• Press Options and select Clear the cache.

Security indicator

If the security indicator

is displayed during a WAP connection, the data

transmission between the phone and the WAP gateway or WAP server (identified

by the IP address setting in the Edit active service settings menu) is encrypted.

However, the security indicator does not indicate that the data transmission

between the gateway and the content server (the location where the requested

resource is stored) is secure. It is up to the service provider to secure the data

transmission between the gateway and the content server.

Authority certificates

Authority certificates are used by some WAP services, such as banking services, for

checking signatures, server certificates (used to determine the identity of the WAP

server) or other authority certificates.

You can download the certificate from a WAP page, if the WAP service supports

the use of authority certificates. After the download, you can view the certificate

and then save or delete it. If you save the certificate, it is added to the certificate

list on the phone.

104

■ SIM services (Menu 11)

In addition to the functions available on the phone, your SIM card

may provide additional services that you can access in menu 13.

Menu 13 is shown only if it is supported by your SIM card. The name and contents

of the menu depend entirely on the service available.

Note: For availability, rates and information on using SIM services, contact your

SIM card vendor, e.g. network operator, service provider or other vendor.

You can set the phone to show you the confirmation messages sent between your

phone and the network when you are using SIM services by selecting the option

Yes within the menu 4-4-5, Confirm SIM service actions.

Note that accessing these services may involve sending a text message or making

a phone call for which you may be charged.

105

7. Battery statements

■ Charging and Discharging

Your phone is powered by a rechargeable battery.

Note that a new battery’s full performance is achieved only after two or three complete

charge and discharge cycles!

The battery can be charged and discharged hundreds of times but it will eventually wear out.

When the operating time (talk-time and standby time) is noticeably shorter than normal, it

is time to buy a new battery.

Use only batteries approved by the phone manufacturer and recharge your battery only with

the chargers approved by the manufacturer. Unplug the charger when not in use. Do not

leave the battery connected to a charger for longer than a week, since overcharging may

shorten its lifetime. If left unused a fully charged battery will discharge itself over time.

Temperature extremes can affect the ability of your battery to charge.

Use the battery only for its intended purpose.

Never use any charger or battery which is damaged.

Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic

object (coin, clip or pen) causes direct connection of the + and - terminals of the battery

(metal strips on the battery) for example when you carry a spare battery in your pocket or

purse. Short circuiting the terminals may damage the battery or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or winter

conditions, will reduce the capacity and lifetime of the battery. Always try to keep the

battery between 15 °C and 25 °C. A phone with a hot or cold battery may temporarily not

106

work, even when the battery is fully charged. Batteries’ performance is particularly limited in

temperatures well below freezing.

Do not dispose of batteries in a fire!

Dispose of batteries according to local regulations (e.g. recycling). Do not dispose of as

household waste.

107

CARE AND MAINTENANCE

Your phone is a product of superior design and craftsmanship and should be treated with

care. The suggestions below will help you to fulfil any warranty obligations and to enjoy this

product for many years.

•

Keep the phone and all its parts and accessories out of the reach of small children.

Keep the phone dry. Precipitation, humidity and all types of liquids or moisture can

contain minerals that will corrode electronic circuits.

•

Do not use or store the phone in dusty, dirty areas. Its moving parts can be damaged.

Do not store the phone in hot areas. High temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain plastics.

•

Do not store the phone in cold areas. When it warms up (to its normal temperature),

moisture can form inside, which may damage electronic circuit boards.

•

Do not attempt to open the phone. Non-expert handling may damage it.

Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the phone.

Do not paint the phone. Paint can clog the moving parts and prevent proper operation.

Use only the supplied or an approved replacement antenna. Unauthorised antennas,

modifications or attachments could damage the phone and may violate regulations

governing radio devices.

All of the above suggestions apply equally to your phone, battery, charger or any accessory.

If any of them is not working properly, take it to your nearest qualified service facility. The

personnel there will assist you and, if necessary, arrange for service.

108

IMPORTANT SAFETY INFORMATION

■ Traffic Safety

Do not use a hand-held telephone while driving a vehicle. Always secure the phone in its

holder; do not place the phone on the passenger seat or where it can break loose in a

collision or sudden stop.

Remember road safety always comes first!

■ Operating environment

Remember to follow any special regulations in force in any area and always switch off your

phone whenever it is forbidden to use it, or when it may cause interference or danger.

Use the phone only in its normal operating positions.

Parts of the phone are magnetic. Metallic materials may be attracted to the phone, and

persons with a hearing aid should not hold the phone to the ear with the hearing aid. Always

secure the phone in its holder, because metallic materials may be attracted by the earpiece.

Do not place credit cards or other magnetic storage media near the phone, because

information stored on them may be erased.

■ Electronic devices

Most modern electronic equipment is shielded from radio frequency (RF) signals. However,

certain electronic equipment may not be shielded against the RF signals from your wireless

phone.

109

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of 20 cm be maintained

between a handheld wireless phone and a pacemaker to avoid potential interference with

the pacemaker. These recommendations are consistent with the independent research by

and recommendations of Wireless Technology Research. Persons with pacemakers:

•

Should always keep the phone more than 20 cm from their pacemaker when the phone is

switched on;

•

Should not carry the phone in a breast pocket;

Should use the ear opposite the pacemaker to minimise the potential for interference.

If you have any reason to suspect that interference is taking place, switch off your phone

immediately.

Hearing aids

Some digital wireless phones may interfere with some hearing aids. In the event of such

interference, you may want to consult your service provider.

Other medical devices

Operation of any radio transmitting equipment, including cellular phones, may interfere

with the functionality of inadequately protected medical devices. Consult a physician or the

manufacturer of the medical device to determine if they are adequately shielded from

external RF energy or if you have any questions. Switch off your phone in health care

facilities when any regulations posted in these areas instruct you to do so. Hospitals or

health care facilities may be using equipment that could be sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in

motor vehicles (e.g. electronic fuel injection systems, electronic anti-skid (anti-lock) braking

110

systems, electronic speed control systems, air-bag systems). Check with the manufacturer

or its representative regarding your vehicle. You should also consult the manufacturer of

any equipment that has been added to your vehicle.

Posted facilities

Switch your phone off in any facility where posted notices so require.

■ Potentially explosive atmospheres

Switch off your phone when in any area with a potentially explosive atmosphere and obey

all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in

bodily injury or even death.

Users are advised to switch off the phone when at a refuelling point (service station). Users

are reminded of the need to observe restrictions on the use of radio equipment in fuel depots

(fuel storage and distribution areas), chemical plants or where blasting operations are in

progress.

Areas with a potentially explosive atmosphere are often but not always clearly marked. They

include below deck on boats; chemical transfer or storage facilities; vehicles using liquified

petroleum gas (such as propane or butane); areas where the air contains chemicals or

particles, such as grain, dust or metal powders; and any other area where you would

normally be advised to turn off your vehicle engine.

■ Vehicles

Only qualified personnel should service the phone, or install the phone in a vehicle. Faulty

installation or service may be dangerous and may invalidate any warranty which may apply

to the unit.

Check regularly that all wireless phone equipment in your vehicle is mounted and operating

properly.

111

Do not store or carry flammable liquids, gases or explosive materials in the same

compartment as the phone, its parts or accessories.

For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do

not place objects, including both installed or portable wireless equipment in the area over

the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly

installed and the air bag inflates, serious injury could result.

Using your phone while in the air is prohibited. Switch off your phone before boarding an

aircraft. The use of wireless telephones in an aircraft may be dangerous to the operation of

the aircraft, disrupt the wireless telephone network and may be illegal.

Failure to observe these instructions may lead to suspension or denial of telephone services

to the offender, or legal action or both.

■ Emergency calls

Important:

This phone, like any wireless phone, operates using radio signals, wireless and

landline networks as well as user-programmed functions. Because of this,

connections in all conditions can not be guaranteed. Therefore, you should never

rely solely upon any wireless phone for essential communications (e.g. medical

emergencies).

Emergency calls may not be possible on all wireless phone networks or when certain

network services and/or phone features are in use. Check with local service providers.

To make an emergency call:

1. If the phone is not on, switch it on. Check for adequate signal strength.

Some networks may require that a valid SIM card is properly inserted in the phone.

112

2. Press

as many times as needed (e.g. to exit a call, to exit a menu, etc.) to clear the

display and ready the phone for calls.

3. Key in the emergency number for your present location (e.g. 112 or other official

emergency number). Emergency numbers vary by location.

4. Press the

key

If certain features are in use, you may first need to turn those features off before you can

make an emergency call. Consult this guide and your local cellular service provider.

When making an emergency call, remember to give all the necessary information as

accurately as possible. Remember that your wireless phone may be the only means of

communication at the scene of an accident - do not cut off the call until given permission to

do so.

■ Certification information (SAR)

THIS MODEL PHONE MEETS THE EU REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.

Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not

to exceed the limits for exposure to radiofrequency (RF) energy recommended by The

Council of the European Union. These limits are part of comprehensive guidelines and

establish permitted levels of RF energy for the general population. The guidelines were

developed by independent scientific organisations through periodic and thorough

evaluation of scientific studies. The limits include a substantial safety margin designed to

assure the safety of all persons, regardless of age and health.

The exposure standard for mobile phones employs a unit of measurement known as the

Specific Absorption Rate, or SAR. The SAR limit recommended by The Council of the

European Union is 2.0 W/kg.* Tests for SAR have been conducted using standard operating

positions with the phone transmitting at its highest certified power level in all tested

frequency bands. Although the SAR is determined at the highest certified power level, the

113

actual SAR level of the phone while operating can be well below the maximum value. This is

because the phone is designed to operate at multiple power levels so as to use only the

power required to reach the network. In general, the closer you are to a base station

antenna, the lower the power output.

Before a phone model is available for sale to the public, compliance with the European

R&TTE directive must be shown. This directive includes as one essential requirement the

protection of the health and the safety for the user and any other person. The highest SAR

value for this model phone when tested for compliance against the standard was 0.66 W/kg.

While there may be differences between the SAR levels of various phones and at various

positions, they all meet the EU requirements for RF exposure.

* The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/kg) averaged

over ten grams of tissue. The limit incorporates a substantial margin of safety to give

additional protection for the public and to account for any variations in measurements. SAR

values may vary depending on national reporting requirements and the network band. For

SAR information in other regions please look under product information at www.nokia.com.

114

LIMITED MANUFACTURER’S WARRANTY

PART OF EUROPE & AFRICA REGION

This limited warranty shall apply in part of Nokia

which all by their nature have a limited lifetime, and

breakage or damage to antennas) unless the defect

was caused directly by defects in materials, design or

workmanship;

Mobile Phones’ Europe & Africa Region unless a local

warranty exists. Nokia Corporation, Nokia Mobile

Phones (”Nokia”) warrants that this NOKIA product

(”Product”) is at the time of its original purchase free

of defects in materials, design and workmanship

subject to the following terms and conditions:

(ii) Nokia or its authorized service company was not

notified by the Customer of the defect within thirty

(30) days after the appearance of the defect within

the warranty period;

1. This limited warranty is given to the end-purchaser

of the Product (”Customer”). It shall neither

exclude nor limit i) any mandatory statutory rights

of the Customer or ii) any of the Customer’s rights

against the seller/dealer of the Product.

(iii) the Product was not returned to Nokia or its

authorized service company within thirty (30) days

after the appearance of the defect within the

warranty period;

2. The warranty period is twelve (12) months from

the date on which the first Customer purchased

the Product. In case of a subsequent purchase or

other change of owner/user, such warranty period

shall continue for the remaining part of the twelve

(12) month period and otherwise remain

unaffected. This limited warranty is only valid and

enforceable in the following countries: Bosnia,

Bulgaria, Croatia, Cyprus, the Czech Republic,

Estonia, any member state of the European Union,

Hungary, Iceland, Israel, Latvia, Lithuania,

Macedonia, Malta, Norway, Poland, Romania, the

Slovak Republic, Slovenia, Switzerland and Turkey.

(iv) the Product serial number, the accessory date

code or the IMEI number has been removed, erased,

defaced, altered or is illegible;

(v) the defect was caused by a defective function of

the cellular network;

(vi) the defect was caused by the fact that the

Product was used with or connected to an accessory

not manufactured and supplied by Nokia or used in

other than its intended use;

(vii) the defect was caused by the fact that the

battery was short-circuited or seals of the battery

enclosure or cells were broken or show evidence of

tampering or the battery was used in equipment

other than for which it has been specified; or

3. During the warranty period Nokia or its authorized

service company will repair or replace, at Nokia’s

sole discretion, a defective Product. Nokia will

return the repaired Product or another Product to

the Customer in good working condition. All parts

or other equipment for which replacements have

been provided shall become the property of Nokia.

(viii) the Product software needs to be upgraded due

to changes in cellular network parameters.

4. A repaired or replaced Product will not be given a

prolonged or renewed warranty period.

7. To claim this limited warranty the Customer shall

present either i) a legible and non-modified

original warranty card which clearly indicates the

name and address of the seller, the date and place

of purchase, the product type and the IMEI or

other serial number or alternatively ii) a legible and

non-modified original purchase receipt which

contains the same information, if such purchase

receipt is presented to the seller/dealer of the

Product.

5. This limited warranty will not cover painted covers

or other similar personalized parts. In all cases that

require unlocking or locking of an operator SIM-

lock, Nokia will first direct the Customer to such

operator for unlocking or locking of the operator

SIM-lock before repairing or replacing the Product.

6. This limited warranty shall not apply to

deterioration due to normal wear and tear. This

limited warranty shall further not apply if:

8. This limited warranty is the Customer’s sole and

exclusive remedy against Nokia and Nokia’s sole

and exclusive liability against the Customer for

defects or malfunctions of the Product. This limited

warranty replaces all other warranties and

liabilities, whether oral, written, (non-mandatory)

statutory, contractual, in tort or otherwise. Nokia is

in no event liable for any incidental, consequential

or indirect damage, costs or expenses. Neither is

Nokia in any event liable for any direct damage,

costs or expenses, if the Customer is a legal person.

(i) the defect was caused by the fact that the Product

has been subjected to: use in contradiction with the

owner’s/user manual, rough handling, exposure to

moisture, dampness or extreme thermal or

environmental conditions or rapid changes in such

conditions, corrosion, oxidation, unauthorized

modifications or connections, unauthorized opening

or repair, repair by use of unauthorized spare parts,

misuse, improper installation, accident, forces of

nature, spillage of food or liquid, influence from

chemical products or other acts beyond the

9. Any change or amendment to this limited warranty

requires Nokia’s prior written consent.

reasonable control of Nokia (including but not limited

to deficiencies in consumable parts, such as batteries

9359974/02

WARRANTY CARD

FILL IN WITH BLOCK LETTERS

Purchaser’s Name: _____________________________________________________

Address: _____________________________________________________________

_____________________________________________________________

Country: _____________________________________________________________

Phone: ______________________________________________________________

Date of Purchase (dd/mm/yy):

Product Type (on phone type label under battery):

Product Model (on phone type label under battery):

Phone Serial No (on phone type label under battery):

–

Place of Purchase: _____________________________________________________

Store Name:__________________________________________________________

Store Address: ________________________________________________________

Stamp

Nokia 002F4W8 User Manual
NAD C542 User Manual
Mr Coffee PR14 User Manual
Motorola V195 User Manual
Motorola IDEN LM 3000E User Manual
Microsoft Windows 7 Professional QLF 00195 User Manual
Maxtor MaxAttach NAS 4100 User Manual
Kenwood Z828MP User Manual
Grindmaster PRECISION BREW Single Cup Pod Brewer User Manual
DeLonghi Coffeemaker EC250 User Manual