User Guide
Nokia 3395
User Guide
The wireless phone described in this guide is approved for use in GSM networks.
LEGAL INFORMATION
Part No. 9354456, Issue No. 2
Copyright ©2001- 2002 Nokia. All rights reserved.
Nokia is a registered trademark of Nokia Corporation.
Printed in Canada 04/2002
Nokia, Nokia Connecting People and the Original Accessories logos are trademarks
of Nokia Corporation and/or its affiliates. Snake II, Space Impact, Bantumi, and
Bumper are trademarks of Nokia Corporation.
US Patent No 5818437 and other pending patents.
T9 text input software Copyright ©1999-2002. Tegic Communications, Inc. All
rights reserved. Downloadable screen savers are licensed under U.S. Patent Number
4,558,302.
Includes RSA BSAFE cryptographic or security protocol software from RSA Security.
The information contained in this user guide was written for Nokia 3395 phone.
Nokia operates a policy of continuous development. Nokia reserves the right to
make changes and improvements to any of the products described in this
document without prior notice.
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF
DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR
INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED
BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN
RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT.
NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY
TIME WITHOUT PRIOR NOTICE.
EXPORT CONTROLS
This product contains commodities, technology or software exported from the
United States in accordance with the Export Administration regulations. Diversion
contrary to U.S. law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your phone may cause TV or radio interference (for example, when using a
telephone in close proximity to receiving equipment). The FCC or Industry Canada
can require you to stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the condition that
this device does not cause harmful interference.
TOPICS
Chapter
For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
Welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making and answering calls . . . . . . . . . . . . . . . . . . . . . . . . .
The menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering letters and numbers . . . . . . . . . . . . . . . . . . . . . . . .
Phone book. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Voice mail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Advanced calling features. . . . . . . . . . . . . . . . . . . . . . . . . . .
Customizing your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Security features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Select a system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WAP services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Your personal digital assistant . . . . . . . . . . . . . . . . . . . . . . .
Fun and games. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Frequently asked questions. . . . . . . . . . . . . . . . . . . . . . . . . .
Nokia One-Year Limited Warranty . . . . . . . . . . . . . . . . . . . .
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
NOTES
Contents
Keys and features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Bottom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Network services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
[ i ]
End a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Caller ID++ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
[ ii ]
Automatic redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Use Voice dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
[ iv ]
Set up the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
PIN codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Fixed dialing++ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
[ v ]
[ vi ]
Vehicles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
A message from the CTIA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
[ viii ]
For your safety
1
1 For your safety
Read these simple guidelines. Breaking the rules may be dangerous or
illegal. Further detailed information is given in “Reference information”
SWITCH OFF WHERE PROHIBITED
Do not switch on the phone when wireless phone use is
prohibited or when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Don't use a hand-held phone while driving.
INTERFERENCE
All wireless phones may get interference, which could affect
performance.
SWITCH OFF IN HOSPITALS
Follow any regulations or rules. Switch phone off near medical
equipment.
SWITCH OFF IN AIRCRAFT
Wireless devices can cause interference in aircraft.
SWITCH OFF WHEN REFUELING
Don't use the phone at a refueling point. Don't use near fuel or
chemicals.
SWITCH OFF NEAR BLASTING
Don't use the phone where blasting is in progress. Observe
restrictions, and follow any regulations or rules.
USE SENSIBLY
Use only in the normal position. Don't touch the antenna
unnecessarily.
[ 1 ]
QUALIFIED SERVICE
Only qualified personnel may install or repair phone equipment.
1
ACCESSORIES AND BATTERIES
Use only approved accessories and batteries. Do not connect
incompatible products.
WATER-RESISTANCE
Your phone is not water-resistant. Keep it dry.
CALLING
Ensure the phone is switched on and in service. Enter the phone
number, including the area code, then press Call. To end a call,
press End. To answer a call, press Answer.
EMERGENCY CALLS
Ensure the phone is switched on and in service. Press
as
many times as needed (for example, to exit a call, to exit a
menu) to clear the display. Enter the emergency number, then
press Call. Give your location. Do not end the call until told to
do so.
• YOUR PHONE’S LABEL
can find the phone’s label on the back portion of the phone. This label
includes various information about the phone, such as the model number.
your service provider, you might be asked for this information. Therefore,
do not remove the phone’s label.
[ 2 ]
Welcome
2 Welcome
Congratulations on your purchase of a Nokia mobile phone. You are now
on your way to using a new and exciting tool. However, before you use
your phone, read this chapter. It provides information you need for using
this guide and for contacting Nokia.
2
• USING THIS GUIDE
For clarity, this guide uses various icons and terms. These icons and terms
page 4. Additionally, the guide describes various network services features,
Documentation conventions
This guide uses various types of texts to indicate specific items. These are
called documentation conventions. The table below lists and describes
these conventions.:
Convention
Description
Indicates emphasized text.
italic
Example: You cannot use your phone without this card.
bold
Indicates one of the following items:
•
Text displayed on your phone’s screen.
Example: Select or Silent.
•
•
Special text such as Notes and Warnings.
A Web link. Example: The Nokia World Wide Web
site at www.nokia.com.
[ 3 ]
Terms
This guide uses the following terms:
2
•
•
Press means to briefly press and release a button.
Press xxx means to press the selection key that is below xxx.
Example: Press Menu
means to press here
•
•
Cross references appear as "see page x."
Press and hold means to press and hold a button for 1 to 3 seconds
(depending on the feature being used), then release the button.
Icons
The following icons are used to alert you to important information:
Tip: Provides information for easy operation.
Note: Provides explanatory information.
Important: Provides information critical to using features correctly.
Caution: This information helps avoid loss of data.
Warning: This information helps avoid damage to the phone,
personal injury, or property damage.
• ACCESSING THIS GUIDE ONLINE
The latest version of this User Guide may be available on the Nokia World
Wide Web site at www.nokia.com. Go to Phones, US link, and then
perform a search to access this documentation. Also, an interactive user
guide is available at www.nokiahowto.com.
[ 4 ]
Welcome
• KEYS AND FEATURES
Front
2
1- Power key
2- Earpiece
3- Screen
4- Navi™ key
5- Scroll keys
6- Number keys
7- Microphone
8- Clear key
Note: When you press any key
the keypad lights stay on
for up to 15 seconds.
Bottom
Charger connection Headset/Car kit connection
Back
Back cover release
Antenna
[ 5 ]
Navi key
The use of the phone is largely based on the
Nokia Navi™ key, located below the display.
This key’s function varies according to the
text displayed in the screen above the key.
For example, in this screen, the word Menu
appears above the Navi™ key. Press the key
to enter the menu function.
2
Navi-key
Scroll keys
The scroll keys
are located to
the right of the Navi-key. Use the scroll
keys to:
Scroll keys
•
•
•
browse menus
move the cursor
adjust earpiece volume during a
call
Clear key
The clear key
is to the left of
the menu key. Press the clear key:
Clear
key
•
to delete a character to the
left of the cursor, or press and
hold to clear all characters
from the display
•
to return to the previous menu
level
•
•
to return from the menu to the start screen
to access the in-call menu
[ 6 ]
Welcome
• NETWORK SERVICES
A number of features known as network services are described in this
guide. These are special services to which your wireless service provider
can give you access.
2
These services include the following:
•
•
•
•
•
Voice privacy
Call waiting
•
•
•
•
Call forwarding
Send own number
Picture messages
Caller ID
News and info services
Conference calling
WAP
Before you can take advantage of these network services features, you
must subscribe to them through your service provider.
Your service provider will give you instructions on how to use these
network services. This guide will tell you when you need to contact your
service provider for more step-by-step information.
Whenever this guide talks about a network services feature, the text will
not only tell you that this is a network services feature, but will also
++
display this icon after the first mention of the feature within a chapter.
Note: Some networks might not support all language-dependent
characters and/or services.
++
Features marked with this icon might not be supported on all
carrier networks.
[ 7 ]
• CONTACTING NOKIA
The Nokia Customer Service department is available to provide you with
help or more information. Before you contact this department, however,
please have the following information available:
2
•
•
The phone’s modelnumber
(3395)
•
The phone’s IMEI (serial) number
Your Zip code
To find the serial number, you have to remove the battery. Refer to
“Remove the battery” on page 12 for step-by-step instructions on this
procedure.
Finally, if you are calling about any type of phone accessory, please have
the accessory available. For example, if you are calling about a headset,
please have it handy. This way, if you are asked a specific question about
the accessory, it will be available for quick reference.
Nokia Customer Care Center, USA
Nokia Mobile Phones, Inc.
7725 Woodland Center Boulevard, Suite 150
Tampa, FL 33614
Tel: 1-888-NOKIA-2U (1-888-665-4228)
Fax: (1) 813-249-9619
For the hearing-impaired only (TTY):
1-800-24-NOKIA (1-800-246-6542)
Customer Service, Canada
Nokia Products Ltd.
601 Westney Rd. South
Ajax, Ontario L1S 4N7
Tel: 1-888-22-NOKIA (1-888-226-6542)
Fax: 1-905-427-1070
[ 8 ]
Before you begin
3 Before you begin
Before you begin using your phone, you need to perform several tasks.
This section tells you how to complete these tasks.
3
• PREPARE YOUR PHONE FOR USE
•
•
•
“Install the SIM card” (see below).
To find out how to remove a battery, refer to “Remove the battery” on
Remove the back cover
1&2 Press the back cover release
button and slide the cover as
shown.
3
Lift the cover off the phone.
Install the SIM card
1
Align the SIM card
beveled corner
•
Beveled corner as shown.
•
Gold contact area downward.
Insert the SIM card.
2
[ 9 ]
Notes about SIM cards
•
Keep all miniature SIM cards out of the reach of small children.
•
The SIM card and its contacts are easily damaged by scratches or
bending, so be careful when handling, inserting, or removing the card.
3
•
You must remove the battery to access the SIM card. Always make
sure that the phone is switched off before you remove the battery.
Install the battery
1
Place the battery in the compartment
with the label side facing up and the
golden contact area aligned with the
contact prongs.
2
3
Slide the battery into place.
Insert the two catches of the back
cover in the corresponding slots
in the phone and slide the cover
towards the bottom of the phone
until it locks into place.
[ 10 ]
Before you begin
Charge the battery
1
Connect the lead from the charger to
the bottom of the phone.
3
2
Connect the charger to a standard
wall outlet. The battery power
indicator (or battery bar) appears on
the screen and starts scrolling. If the
phone is on, Charging appears also.
Battery bar
3
4
When the battery is charged, the
battery bar stops scrolling. Battery full appears also, if the phone is
on.
Disconnect the charger from the phone.
For best performance, charge your phone’s battery for 24 hours before
using your phone.
Battery notes
Use the following guidelines to obtain the best performance from
your battery:
•
•
•
Use the battery until it is fully discharged. Repeat this procedure
twice for a total of three charging cycles.
Battery operation time may be less than the estimated times during
the first charges. This condition is normal.
You can use your phone while the battery is charging. However, if the
battery is completely empty, it may need to recharge a few minutes
before you can make or receive calls or the battery indicator appears.
Note: The battery will accept a "trickle charge" for an additional
information on batteries.
[ 11 ]
Before you begin
Note: When you remove and replace the battery, you must reset
the phone’s clock. See “Set up the clock” on page 66.
• IMPORTANT BATTERY INFORMATION
3
Important: Your phone is powered by a rechargeable battery.
Use only batteries approved by Nokia and recharge your battery
only with the chargers approved by Nokia. Never use any charger
or battery which is damaged.
The battery can be charged and discharged hundreds of times but
it will eventually wear out. When the operating time (talk-time
and standby time) is noticeably shorter than normal, it is time to
buy a new battery.
The BLB-3 battery doesn't need a full discharge before recharging.
[ 13 ]
4 About your phone
• SWITCH ON YOUR PHONE
•
Press and hold
for two seconds.
4
The phone might ask for a Personal
Identification (PIN) code or a security
code. See “PIN and PUK codes” on
page 68 for more information.
Warning: Do not switch on the phone in
places where hand-held phone use is prohibited or where the use
of the phone could cause interference or danger.
Important: As with any other radio
transmitting device, do not touch the
antennaunnecessarilywhenthephone
is switched on. Contact with the
antenna affects call quality and might
cause the phone to operate at a higher
power level than needed.
• ABOUT THE START SCREEN
When you turn on your phone, the first screen
that appears is the Start screen. In the middle
of the Start screen, you see information
indicating which wireless network your phone
uses. This information can vary between
phones. Other indicators and icons appear on
[ 14 ]
About your phone
About indicators and icons
On your phone, you have two types of identifiers: indicators and icons.
INDICATORS
Indicators show the status of something. The phone uses three types of
indicators:
4
•
•
•
Signal strength indicator:
Shows the strength of the signal to your phone.
Battery power indicator:
Shows how much power is left in your phone’s battery.
Volume indicator:
Shows the earpiece volume level. Adjust the
volume level with the scroll keys (see “Adjust
ICONS
Icons are graphical representations of a specific item or situation. For
example, this icon
may appear when you have a voice message
waiting to be heard. (Some systems use a different method.)
The rest of this section shows examples of each icon that can appear on
your phone and tells you what these icons indicate.
Line 1 is selected for outgoing calls.
Line 2 is selected for outgoing calls.
You have an active call.
[ 15 ]
You have one or more new voice messages. (Some carriers may
use a different symbol)
You have one or more new text messages. (If blinking, text
message memory is full.)
Keyguard is on. Your phone will not accept any key presses.
4
The alarm clock is set.
The Silent profile is selected.
Incoming voice calls are being forwarded to another number.
You have forwarded all voice calls received on line 1.
You have forwarded all voice calls received on line 2.
You have forwarded all voice calls received on lines 1 and 2.
The phone is ready for you to enter a response.
Characters entered will be uppercase letters. Press
switch letter case.
to
Characters entered will be lowercase letters.
Press
to switch letter case.
Characters entered will be numbers. (When entering letters,
switch to numbers by pressing and holding .)
You are in “special character” mode. Select a character, then
press Use. (When entering letters, press and hold the
to see the special characters menu.)
key
You are in predictive text mode.
You are in predictive text mode. Characters entered will be
uppercase letters. Press
to switch letter case.
You are in predictive text mode. Characters entered will be
lowercase letters. Press to switch letter case.
[ 16 ]
About your phone
You are in predictive text mode. Characters entered will be
numbers.
Indicates the current call.
Indicates a call on hold.
4
Indicates voice security is active.
Indicates voice security is not active.
Note: Check with your service provider for the voice
security feature.
[ 17 ]
5 Making and answering calls
This chapter tells you how to make and receive calls and how to adjust
certain options.
• MAKE A CALL
5
Check the signal strength
The signal indicator on the left side of your phone’s screen
shows the strength of the network radio signal. The indicator
scrolls as the signal strength increases and decreases. To get
the strongest signal, try moving your phone slightly. If you’re
inside a building, move toward a window.
Use the keypad
1
Enter the area code and phone number.
2
Press Call.
Hold the phone as you would any other
telephone, with the antenna pointed up.
Important: As with any other radio transmitting device, do not
touch the antenna when the phone is switched on. Contact with
the antenna affects call quality and may cause the phone to
operate at a higher power level than otherwise needed.
Warning: Do not switch on the phone when wireless phone use is
prohibited or when it may cause interference or danger.
Use the phone book
1
From the Start screen, press
and scroll to the number you want.
OR
Press
, then press the number key that matches the first letter of
the name to skip ahead quickly in the list.
[ 18 ]
Making and answering calls
2
Press Call to make the call.
Advanced calling options
•
•
•
Make an international call:
Make a call using the voice tag feature:
5
Make a 1-touch call:
Adjust the earpiece volume during a call
•
To increase the volume, press
.
•
To decrease the volume, press
.
If an accessory with its own loudspeaker is connected to your phone, the
volume keys adjust the volume for that accessory.
Note: This feature works only during a call.
• END A CALL
•
Press End.
• ANSWER A CALL
When someone calls you, the phone alerts
calling flashes on the display.
•
To answer, press any key except
.
++
Caller ID
This is a network service that helps identify incoming calls. Contact your
service provider for details
[ 19 ]
When Caller ID is active, your phone may display the caller’s phone
number. The caller’s name may also appear, if their name and number have
wireless network supports it.
• REJECT A CALL
•
Press
and the phone stops ringing.
5
Note: You can also set the phone so that the call goes to voice
mail. This feature must be set up with Call Forwarding. See “Call
forwarding++” on page 48. for more information.
• REDIAL THE LAST-DIALED NUMBER
•
Press
, then Call.
Dial any of the 10 last-dialed numbers
1
Press
to scroll to the number you want to redial.
2
Press Call.
[ 20 ]
The menu
6 The menu
Your phone offers an extensive range of functions that are grouped in
menus and submenus. Access these menus with the selection keys and
scroll keys, or by entering the appropriate shortcut number.
• SCROLL BAR
While using your phone’s menus, a scroll
bar appears at the far right of the screen.
This bar indicates where you are in the
menu. Each numbered “tab” on the bar
represents a different menu item.
6
For example, press Menu once. The scroll
bar appears with the first (top) tab displayed. A different tab appears each
time you press
or
.
• HELP TEXT
Many menu items have brief help text. To view the help text, scroll to the
menu item and wait for about 15 seconds. Press More to see the next
page of the text or Back to exit.
• MENU SHORTCUTS
When you scroll to a menu item, the menu
number appears on the screen above the
scroll bar. If you learn the menu numbers,
you can use them to quickly find features
instead of scrolling to them through
the menu.
[ 21 ]
• LIST OF MENU SHORTCUTS
•
•
•
To access phone book menus, press Menu 01, then the menu number.
To access other menus, press Menu, then the menu number.
Some menus may not appear. Ask your service provider for details.
5 Templates
1 Phone book
1 Please call...
2 I’m at home...
3 I’m at work...
4 I can’t answer...
5 I am late...
1 Search
2 Add entry
3 Erase
6
4 Edit
6 (empty)
5 Options
6 Smileys
1 Phone book view
7 Message settings
2 Memory status
6 Send entry
7 1-touch dialing
8 Voice tags
1 Add voice tag
2 Playback
1 Set 1 (up to five sets
may appear)
1 Message center
number
2 Messages sent as
1 Text
2 Fax
3 Page
4 E-mail
3 Change
4 Erase
9 Assign tone
10 Service nos.
3 Message validity
1 1 hour
2 6 hours
2 Messages
3 24 hours
4 3 days
1 Inbox
5 1 week
6 Maximum time
2 Common
1 Delivery reports
1 Yes
2 Outbox
3 Write messages
4 Picture messages
[ 22 ]
The menu
2 No
2 Reply via same
center
5 Clear timers
4 Profiles
1 Yes
2 No
1 Normal
2 Silent
1 Select
8 News & info service
1 On
2 Customize
2 Off
1 Ringing tone
3 Topic index
4 Topics
5 Language
6
2 Ringing volume
3 Ringing options
4 Message alert tone
5 Keypad tones
6 Warning tones
7 Vibrating alert
8 Screen saver
9 Service command editor
10 Voice messages
1 Listen to voice
messages
2 Voice mailbox number
9 Rename
3 Discreet
3 Call log
4 Loud
5 (empty)
6 (empty)
1 Missed calls
2 Received calls
3 Dialed calls
4 Clear call lists
1 All calls
2 Missed calls
3 Dialed calls
4 Received calls
5 Call timers
1 Last call
5 Settings
1 Alarm clock
2 Clock
1 Hide clock
2 Set the time
3 Time format
3 Auto update of date and
time
2 All calls
3 Received calls
4 Dialed calls
1 On
2 Confirm first
[ 23 ]
3 Off
1 Automatic
2 English
3 Français
4 Call settings
1 Automatic redial
1 On
2 Off
2 Calling card
4 Español
2 Cell info display
1 On
2 Off
1 None
2 Card A
3 Card B
3 List of own numbers
4 System selection
1 Automatic
2 Manual
6
3 Closed user group
1 Preset
2 On
3 Off
5 Touch tone length
1 Short
2 Long
6 Welcome note
8 Restore factory
settings
4 Send own caller ID
when calling
1 Preset
2 On
3 Off
6 Security settings
5 Call waiting
1 Activate
2 Cancel
1 SIM card security
1 On
2 Off
2 Phone security
3 Status
6 Line for outgoing calls
(see your service
provider)
1 Line 1
2 Line 2
7 Automatic answer
(Headset attached)
1 On
1 Off
2 On
3 Call restrictions
1 Outgoing calls
2 International calls
3 International calls
except to home
country
2 Off
4 Incoming calls
5 Incoming calls if
roaming
5 Phone settings
1 Language
[ 24 ]
The menu
6 Cancel all call
restrictions
7 Games
4 Fixed dialing (see your
service provider)
5 Change access codes
1 Change PIN code
2 Change PIN2 code
3 Change security
code
1 Select game
1 Snake II
1 New game
2 High scores
3 Options
1 Mazes
6
2 Level
4 Change restriction
password
4 Instructions
2 Space impact
1 New game
2 High scores
3 Chapters
4 Instructions
3 Bumper
6 Forwarding
1 Forward all voice calls
1 Activate
2 Cancel
3 Status
1 New game
2 High scores
3 Tables
2 Forward if busy
3 Forward if not answered
4 Instructions
4 Bantumi
5 Pairs II
4 Forward when phone off
or no coverage
5 Forward when not able to
take calls
1 Time trial
2 Puzzle
1 Activate
2 Cancel
3 Set delay time
6 Cancel all call forwarding
2 Game services
3 Settings
1 Sounds
1 Off
2 On
2 Lights
1 Off
Ask your service
provider for details.
2 On
[ 25 ]
3 Shakes
1 Off
5 Go to date
6 Set the date
2 On
10 Composer
8 Calculator
1 Play
1 Equals
2 Save
2 Add
3 Tempo
4 Send
3 Subtract
4 Multiply
5 Divide
6
5 Clear screen
6 Exit
6 In home curr.
7 In foreign curr.
8 Exchange rate
11 Services
1 Home
9 Calendar
2 Bookmarks
3 Service inbox
4 Settings
1 View day notes
1 Erase
5 Clear cache
2 Edit
3 Move
12 Keyguard
4 Send note
2 Make note
1 Reminder
2 Call
13 SIM services
(if supported
by your SIM card and service
provider)
3 Meeting
4 Birthday
3 Erase notes
1 Of chosen day
2 One by one
3 All at once
4 View all notes
[ 26 ]
Entering letters and numbers
7 Entering letters and numbers
You can use two methods to enter letters and numbers into your phone
for a person’s name and phone number, writing a text message, and so on.
•
Standard text input, for making entries in the phone book, calendar
notes, writing short text messages, and renaming caller groups.
•
Predictive text input, for writing text messages and picture messages.
See “Using predictive text input” on page 87. for more information.
7
• STANDARD TEXT INPUT
ABC mode
This is the default mode. The ABC icon
appears as visual confirmation.
1
Find the key with the letter you want
to enter.
2
Press it as many times as needed for
the letter to appear on the screen.
Tip: Let the cursor move to the next empty space before
entering the next letter.
For example, to enter the name John:
Press
Press
Press
Press
J
O
H
N
[ 27 ]
Depending on the selected display language, the following characters
may be available.
Key
1
Characters
. , ’ ? ! - 1
Key
7
Characters
P Q R S 7
2
A B C 2
D E F 3
G H I 4
J K L 5
8
T U V 8
3
9
W X Y Z 9
Space, 0
4
0
7
5
*
Special characters (See
page 29 for details.)
6
M N O 6
#
Changes letter case
Note: Some networks may not support all language-dependent
characters.
ENTER SPACES AND PUNCTUATION
•
To enter a space, press
once.
•
To enter punctuation marks, press and hold
with the following special characters available:
. A screen appears
&
•
•
. , ? ! : ; - + # * ( ) ‘ “ _ @ & $ £ % / < > ¿ ¡ § = ¤
¥
Use the scroll keys to select the character you want, then press Use.
ERASE MISTAKES
If you make a mistake:
•
•
Press
to erase that character.
Press
and hold
as needed to erase more than one character, or press
to erase the entire field of characters.
CHANGE LETTER CASE
To switch between uppercase and lowercase letters, press
•
.
The ABC icon switches to abc, showing you are using lowercase letters.
[ 28 ]
Entering letters and numbers
123 mode
To enter numbers, you can:
•
Press and hold
and switch to 123 mode. Your phone displays
the
icon. Press the appropriate number key to enter a number.
OR
•
While in ABC mode, press and hold the number key until the number
appears.
As with the ABC mode, if you make a mistake:
•
•
Press
to erase that character.
7
To switch back to the ABC mode, press and hold
again.
Use special characters in names and phone numbers
IN ABC MODE
1
Press and hold
characters available:
. A screen appears with the following special
&
. , ? ! : ; - + # * ( ) ‘ “ _ @ & $ £ % / < > ¿ ¡ § = ¤
¥
2
Use scroll keys to select the character you want, then press Use.
IN 123 MODE:
The
key inserts the following characters only in 123 mode:
This character sends command strings to the network. Contact your
service provider for details.
*
+
p
This character is a prefix for dialing international numbers.
This character creates a pause that occurs when dialing a number.
Numbers entered to the right of this special character are automatically
sent as touch tones after a 2.5-second pause.
[ 29 ]
8 Phone book
The Nokia 3395 has a host of options to give
you full control of your phone book and its
contents.
•
A phone book entry can consist of a
number only, or a name and number.
•
A name may appear only once in the
phone book. If you try to save a name that already exists in the phone
book, the phone asks if you want to replace the existing name.
8
• SAVE NAMES AND NUMBERS
Save a name and number
1
2
3
Enter the phone number.
Press and press Save.
Enter a name, then press OK.
Tip: For international dialing, press
twice to enter the +
symbol in front of the phone number.
Save a number only
1
2
Enter the phone number.
Press , then press and hold Save.
The number is saved in your phone book. You can add a name to it later.
Save a name and number while in a call
1
2
3
4
5
Press
then press Options.
Scroll to Phone book, then press Select.
Scroll to Add entry, then press Select.
Enter the name, then press OK.
Enter the phone number, then press OK.
[ 30 ]
Phone book
If your phone book is full
If your phone book is full, Phone book full displays. You must replace an
existing entry.
•
Scroll to the entry you want to replace, then press OK.
• FIND NAMES IN THE PHONE BOOK
From the Start screen
•
Press
to scroll to the number you want.
OR
•
Press
want.
, then press the key with the first letter of the name you
8
OR
•
Search the phone book.
Press Menu, then Select.
Search appears highlighted.
Press Select.
1
2
When the box appears, enter the name and press OK. You can enter
just the first few letters of the name, then press OK. Your phone
shows the closest matching name.
While in a call
1
2
Press
then Options.
Scroll to Phone book and press Select.
Search is highlighted.
3
4
Press Select.
When the box appears, enter the name and press OK. You can enter
just the first few letters of the name, then press OK. Your phone
shows the closest matching name.
[ 31 ]
• EDIT (REVISE) NAMES AND NUMBERS
At the Start screen:
1
2
3
4
5
Press Menu then Select.
Scroll to Edit, then press Select.
Scroll to the name you want to edit, then press Edit.
Edit the name, then press OK.
Edit the number, then press OK.
• SEND NAMES AND NUMBERS
You can send names and numbers as electronic business cards to other
phones with SMS capability.
8
1
2
3
Press Menu, then Select.
Scroll to Send Entry and press Select.
Scroll to the name and/or number you wish to send the name/number
to and press Send.
4
Enter the phone number to which you want to send the name/number
and press OK.
Tip: You may need to add a 1 to the number. Check with your service
provider for details.
OR
Press Search and scroll through the phone book to find the name that
you want to send the name/number to.
5
6
Press OK. The phone number stored for that name appears.
Press OK.
A confirmation message appears.
[ 32 ]
Phone book
• ERASE NAMES AND NUMBERS
Erase selected names and numbers
Important: You cannot undo erase functions, so be careful!
At the Start screen:
1
2
Press Menu, then Select.
Scroll to Erase, then press Select.
One by one appears highlighted.
Press Select and scroll to the name you want to erase.
Press Erase, then press OK.
OR
3
4
8
If you don’t want to erase that name, press
the list.
to return to
Erase your entire phone book
Important: This feature erases your entire phone book and can’t
be undone!
1
2
Press Menu then Select.
Scroll to Erase and press Select.
One by one appears highlighted.
Scroll to Erase all and press Select.
When you see Are you sure?, press OK.
3
4
5
When the Security code: prompt appears, enter your security code
and press OK. Erasing phone book appears.
[ 33 ]
• PHONE BOOK OPTIONS
•
At the Start screen, press Menu, then Select. Scroll to select an option.
Option
Search
Action
Searches for a specific name. See “Find names in the
Add entry
Erase
Enters a new name and number. See “Save a name
Erases names/numbers. See “Erase names and
8
Edit
Make changes to names and numbers stored in
memory. See “Edit (revise) names and numbers” on
Options
Chooses the phone book view, and shows the
memory status. See next page for details.
Send entry
Sends a phone book entry to another phone. See
1-touch dialing Assigns up to nine 1-touch dial locations. See
“1-touch dialing” on page 57 for more information.
Voice tags
Programs voice-activated dialing. See “Use Voice
dialing” on page 53 for more information.
Assign tone
Service nos.
Assigns a ring tone for a specific name or number in
View numbers set up by your service provider.
[ 34 ]
Phone book
Options
PHONE BOOK VIEW
Change the way names and numbers appear.
1
2
Press Menu, then Select.
Scroll to Options and press Select.
Phone book view appears, along with the current setting.
Press Select.
3
Three settings appear, with the current setting highlighted:
Name list, Name + number, Name only.
4
Scroll to the setting you want and press Select.
8
CHECK SIM MEMORY STATUS
Your phone saves names and numbers in the SIM card’s memory. The amount
of names and numbers you can store in SIM card memory is dependent on
SIM card capacity. Please check with your SIM card provider or carrier.
1
2
3
Press Menu, then Select.
Scroll to Options and press Select.
Scroll to Memory status and press Select.
Assign tone
Assign unique ringing tones to names and numbers stored in the phone
book. When someone with an assigned tone calls, you’ll know who it is
because of the ringing tone.
1
2
From the Start screen, press Menu, and then Select.
Scroll to Assign tone and press Select.
Note: You must have phone numbers stored in memory.
3
4
Scroll to the name you want to assign a ring tone and press Assign.
Scroll to the ring tone you want for that name, then pause to hear a
sample of the tone.
5
Press OK to select the tone or keep scrolling to select another tone.
[ 35 ]
• CALL LOG
This network feature automatically keeps
track of numbers you’ve dialed, numbers
that have called you, and the time you’ve
spent in calls.
Check for missed calls
Your phone saves the numbers and names (if available) of the last 10 callers
that have tried unsuccessfully to reach you. A message on the Start screen
shows how many calls were missed.
AFTER MISSING A CALL
1
Press List.
8
If you have missed more than one call, you can scroll through the list
of numbers.
2
3
To dial the displayed number, press Options.
Call appears highlighted.
Press Select to dial the number.
OR
more information.)
4
To exit, press and hold
.
AT ANY TIME
1
Press Menu 3 1.
The phone numbers of missed calls appear in the order received.
2
3
Scroll to the number you want to see information about.
To dial the number, press Options.
Call appears highlighted.
Press Select.
4
OR
[ 36 ]
Phone book
more information.)
5
To exit, press and hold
.
Look up received calls
Your phone saves the phone numbers of the 10 most recent calls you’ve
answered, if the caller’s number was available.
1
Press Menu 3 2.
The last call received appears.
2
3
Scroll to the number you want to see information about.
To dial the number, press Options.
8
Call appears highlighted.
4
Press Select.
OR
Scroll for other options. (See "Options in call lists" below.)
5
To exit, press and hold
.
Look up dialed calls
Your phone saves the last 10 numbers you’ve dialed.
1
Press Menu 3 3.
The last call you placed appears.
Scroll to the call you want to dial.
To dial the number, press Options.
Call appears highlighted.
2
3
4
5
Press Select.
OR
To exit, press and hold
.
[ 37 ]
Options in call lists
When you view the missed calls, received calls, or dialed calls list and
press Options, a list of options appears on your phone’s screen.
Call lets you place a call to the number.
Call time shows the time of the last call.
Edit number allows you to call the displayed number and/or edit and save
it with a name to your phone book.
Save allows you to enter a name for the number and save both to your
phone book.
Erase erases the number from the call list.
8
Clearing call lists
This feature clears all the missed, received, and dialed call lists.
1
2
Press Menu 3 4.
Scroll to All calls, Missed calls,
Dialed calls, or Received calls,
then press OK.
3
A confirmation appears.
Tip: Missed, received, and dialed calls lists are also erased when
you change the phone security setting (see “Security features” on
page 68) or when you use a SIM card that is not one of the five
most recent cards used with the phone.
[ 38 ]
Voice mail++
9 Voice mail++
Voice mail is a network feature that enables those who call you to leave
a voice message.
Note: You can use voice mail with either one or two phone lines.
When you receive a voice message, your phone lets you know by beeping,
displaying an icon on the screen, or showing a text message. The method
of notification depends upon your carrier.
If you receive more than one voice mail message, your phone may display
the number of messages that you have received. If you have subscribed to
two different phone lines, the message would indicate the line to which
the message was addressed.
9
However, even though your phone notifies you of a message, the voice
mail feature is independent of your phone’s software. To use voice mail,
you must have:
•
•
•
A voice mail subscription
A voice mailbox number
A temporary password
These items are provided by your service provider. Your service provider
should also tell you how to record a greeting for your voice mailbox and
how to change the temporary password.
After you obtain this information from your service provider, you must
then save your voice mailbox number to your phone. Refer to “Save the
After you have saved your voice mailbox number, refer to “Listen to your
Note: If you have difficulty using the voice mail feature, contact
your service provider.
[ 39 ]
• SAVE THE VOICE MAILBOX NUMBER
1
Press Menu 2 1 0 2.
2
Enter your voice mailbox number, then press OK.
Note: The number can be up to 32 digits long. Your service
provider will give you your voice mailbox number.
• LISTEN TO YOUR VOICE MESSAGES
If there’s a notification message on your screen, you can get your voice
messages using any of the following methods:
•
•
Press Read and follow the directions provided.
If you’ve saved your voice mailbox number in your phone, press and
9
hold
to call your voice mailbox.
•
Call your voice mailbox number as you would any other telephone
number, then follow the directions provided.
[ 40 ]
Profiles
10 Profiles
The profiles feature lets you adjust and
customize the phone’s ringing tones for
different events and environments. There are
six profiles available:
•
Normal is the default setting, but it is
easy to choose another profile.
•
•
•
•
•
Silent
Discreet
Loud
(empty)
(empty)
10
• SELECT PROFILES
1
2
3
Press Menu 4.
Scroll to the profile you want.
Press OK.
Select appears highlighted.
Press OK.
4
OR
•
To access the profiles directly, press and release
until the desired
profile is highlighted, then press OK.
For example, to keep your phone from ringing, select the Silent profile.
If you want your phone to ring loudly, select the Loud profile. You can
[ 41 ]
11 Advanced calling features
• ACTIVE CALL OPTIONS
++
Use call waiting
This network service lets you receive an incoming call when you’re already
in a call. (Contact your service provider for availability.) The phone beeps
to let you know of the incoming call.
ACTIVATE/CANCEL CALL WAITING
1
2
Press Menu 5 4 5.
Activate appears highlighted.
Press OK to activate.
OR
Scroll to Cancel and press OK to deactivate.
11
CONFIRM CALL WAITING STATUS
1
Press Menu 5 4 5.
Activate appears highlighted.
Scroll to Status and press OK.
The display shows Active: Voice calls.
2
ANSWER A WAITING CALL
1
Your phone signals when you have a call
waiting.
2
Press Options and then Answer to put
the current call on hold and answer the
waiting call.
[ 42 ]
Advanced calling features
REJECT A WAITING CALL
You can just let the phone ring, or follow the steps below.
•
Press
,
The caller hears a busy signal when you
reject a call.
OR
•
You can set Call Forwarding to send the
caller to voice mail when you press
or
1
2
Press Options and scroll to Reject.
Press Select. The call is sent to Voice mail.
SWITCH BETWEEN CALLS
1
Press Options.
11
2
When Swap appears highlighted, press Select.
Swapped appears briefly.
The
icon represents the active call and the
icon represents the
call on hold.
END THE ACTIVE CALL
1
Press Options and scroll to End active call.
2
Press Select.
THIRD CALL WAITING
If you have both an active and a held call, and a third call is waiting,
choose one of the following options.
DROP AN ACTIVE CALL TO ANSWER THE WAITING CALL
1
Press Options and scroll to End active call.
2
Press Select to answer the third call. The held call is unaffected.
[ 43 ]
END THE ACTIVE CALL AND HELD CALL TO ANSWER THE
WAITING CALL
1
Press Options and scroll to End all calls.
2
Press Select.
Use in-call options
During a call, press
and Options to see the In-call menu. Your choices are:
Choice
What it does
Hold or
Unhold
Holds or releases a call.
New call
Makes a call when you have a call in progress.
End all calls Ends all calls.
Touch tones Sends touch tones.
Phone book Switches you to the phone book.
11
Messages
Mute
Allows access to text and voice message functions.
Mutes your phones microphone.
Hold and unhold
1
2
To put a call on hold, press
and then Options.
When Hold appears highlighted, press Select.
To return to the call:
1
2
Press
and then Options.
When Unhold appears highlighted, press Select.
New call
1
Press
and then Options.
2
Scroll to New call, then press Select.
[ 44 ]
Advanced calling features
3
4
Enter the second phone number.
OR
Press Search, then scroll to the number in the phone book.
Press Call.
SWITCH BETWEEN TWO CALLS IN PROGRESS
1
Press Options.
2
When Swap appears highlighted, press Select.
The
icon represents the active call and the
icon represents the
call on hold.
END THE ACTIVE CALL
1
Press Options and scroll to End active call.
2
Press Select.
The held call becomes the active call.
11
End all calls
1
2
Press Options.
Scroll to End all calls, then press Select.
Touch tones
When you press the keys during a call, your phone generates sounds
known as touch tones. Use touch tones to access many automated, over-
the-phone services such as voice mail, checking airline arrival/departure
times, and bank balances.
Note: You must be on an active call to send touch tones.
SET TOUCH-TONE LENGTH
1
Press Menu 5 5 5.
The current selection appears highlighted.
Scroll to Short (1/10 second) or Long (1/2 second).
Press OK.
2
3
[ 45 ]
SAVE TOUCH TONE STRINGS
A touch-tone string is a series of tones in a certain sequence. Use touch
tone strings to send and receive information with your phone. For example,
you can save your office voice mailbox number along with your password
for easy access to your messages.
Store touch tone strings the same way you save phone numbers (see “Save
For frequently used strings of numbers, you can save an entire sequence
of digits in your phone book and send it as a touch tone string.
SEND A TOUCH TONE STRING
1
2
3
Press
and then Options.
Scroll to Touch tones and press Select.
Enter a touch tone string or recall a touch tone string from the phone
book and press OK.
Tip: Press
to enter a p. Numbers entered to the right of this
11
special character are automatically sent as touch tones after a
2.5-second pause.
OR
Press
to enter a w, or "wait" Numbers to the right of the w
are not sent until you press Send.
Phone book
1
Press
and then Options.
2
Scroll to Phone book and press Select. Now most of your phone book
++
Messages
You can access almost all of your phone’s text message, picture message,
and voice mail functions during a call. (See “Messages++” on page 85.)
1
2
Press
, then press Options.
Scroll to Messages and press Select.
Scroll to the message function you want.
[ 46 ]
Advanced calling features
++
Conference calls
This network service allows you to make a 3-way conference call with
your phone. Check with your service provider for details.
MAKE A CONFERENCE CALL
1
2
3
4
Make a normal call to the first party.
Press and then Options.
Scroll to New call and press Select.
Recall or enter the number of the next party you want to include, then
press Call.
5
6
After the other party answers, press Options.
Scroll to Conference, then press Select.
END THE CONFERENCE CALL
1
2
3
Press Options.
11
Scroll to End all calls.
Press Select.
HAVE A PRIVATE CONVERSATION WITH A PARTICIPANT
1
While in a conference call, press Options.
2
Scroll to Private, then press Select.
A list of the participants appears.
3
4
5
Scroll to the person you want to speak with, then press OK.
To rejoin the conference call, press Options.
Scroll to Conference, then press Select.
DROP A PARTICIPANT FROM THE CONFERENCE CALL
1
While in a conference call, press Options.
2
Scroll to Private, then press Select.
A list of the participants appears.
3
Scroll to the person you want to drop, then press OK.
[ 47 ]
4
5
6
When End appears briefly, press the Navi-key.
Press Options, then scroll to Transfer.
Press Select.
++
• CALL FORWARDING
This network service lets you forward your
incoming calls to another phone number.
Note: If you have subscribed to a second
phone line, call forwarding works
separately for each line. Make sure
you have selected the line you want
before you set up any call forwarding.
The following icons appear on your phone’s screen:
Incoming voice calls are being forwarded to another number.
You have forwarded all voice calls that are received on line 1.
You have forwarded all voice calls that are received on line 2.
11
You have forwarded all voice calls that are received on lines
1 and 2.
Activate call forwarding
1
Press Menu 6. Scroll to one of the following options:
6 1 Forward all voice calls
Forwards all voice calls without ringing.
6 2 Forward if busy
6 3 Forward if not answered
6 4 Forward when phone off or no coverage
6 5 Forward when not able to take calls
Combines the previous three types, and lets you choose a delay
time between 5 and 30 seconds.
6 6 Cancel all call forwarding
[ 48 ]
Advanced calling features
2
3
4
Press Select.
Activate is highlighted; press OK.
Select Voice Mail
OR
Select Other number.
If you select Voice mail:
•
•
Press OK. All calls are forwarded to your voice mailbox.
To verify your voice mailbox number, press Details. Number appears
highlighted. Press OK to verify your voice mailbox number.
If you select Other number:
Press OK. Enter the phone number to which you want to forward
•
calls, then press OK. Press Number to see if you entered the phone
number correctly.
5
Press and hold
to exit and return to the Start screen.
11
SET THE DELAY TIME
After setting your phone to "Forward when not able to take calls"
(Menu 6 5), you can choose how long your phone will ring before
forwarding the call.
1
Press Menu 6 5.
Activate appears highlighted.
Scroll to Set delay time and press OK.
Scroll to the time delay you want (from 5 to 30 seconds) and press OK.
Menu 6 5 appears again.
2
3
4
5
Press Select.
Activate appears highlighted.
Press OK.
Voice mail appears highlighted.
[ 49 ]
6
7
Select Voice mail
OR
Select Other number and press OK.
A confirmation message appears.
Press Details to review your Number and Delay settings.
OR
Press and hold
to return to the Start screen.
Cancel call forwarding
1
2
3
Press Menu 6.
Scroll to the forwarding option you want to cancel and press Select.
Scroll to Cancel and press OK.
Note: Canceling all call forwarding may also cancel any automatic
forwarding of calls to voice mail that your service provider has
activated for you. Also, this option may cancel your call forwarding
service. Contact your service provider for details.
11
Check call forwarding status
1
2
3
Press Menu 6.
Scroll to the call forwarding option you want and press Select.
Scroll to Status, then press OK.
Note: Status is not available for Forward when not able to take
calls. Press Number to see which phone number the calls are being
forwarded to.
• AUTOMATIC REDIAL
This feature redials the number you’re trying to call up to ten times.
Note: Automatic redial will not work while you make or answer
another call.
[ 50 ]
Advanced calling features
Activate automatic redial
1
2
3
Press Menu 5 4 1.
Scroll to On, then press OK.
Press and hold
to return to the Start screen.
If the number you dial is busy, your phone immediately redials the number.
If it is still busy, your phone redials up to nine more times.
• CALLING CARD
You can store two calling card numbers in your phone’s memory.
Save calling card information
1
2
Press Menu 5 4 2.
Scroll to the calling card information you want to change (Card A or
Card B), then press Options.
3
4
5
Scroll to Edit, then press OK.
11
At Dialing sequence, press Select. Scroll to the dialing sequence your
card uses (see chart below) then press Select.
Dialing
sequence
Use for cards
that require you to:
Cards using
this sequence
Access no. Dial the 1-800 access number, then MCI, AT&T True
+ Phone no. phone number, then card number (+ Choice, Sprint
+ Card no. PIN if required).
Canada, Unitel
Access no. Dial the 1-800 access number, then networkMCI,
+ Card no. card number (+ PIN if required), then WorldPhone MCI
+ Phone no. phone number.
Prefix
Dial the prefix (any numbers that
GTE, PacBell, AT&T,
+ Phone no. must precede the phone number) and Stentor
+ Card no. phone number you want to dial, then
card number (then PIN, if required).
[ 51 ]
Note: The order of the following steps may vary, depending on
which dialing sequence your card uses.
6
Enter the access number (usually the 1-800 number listed on the back
of the calling card), then press OK.
7
8
9
Enter the card number and/or PIN, then press OK.
Your phone displays Save changes? Press OK.
When Dialing sequence appears again, scroll to Card name and press
Select.
10 Enter the card name, then press OK.
11 Press Select to choose that calling card as the current calling card.
12 Press and hold
to return to the start screen.
Choose a calling card
1
Press Menu 5 4 2.
11
The current calling card setting appears highlighted.
Scroll to the card you want to use, then press Options.
Select is highlighted
2
3
4
Press OK.
Enter your security code, then press OK.
Card ready for use appears.
Make a calling card call
1
Enter the phone number, including any prefix (such as 0 or 1) that
your calling card may require. See your calling card for instructions.
2
3
Press and hold Call until your phone displays Card call.
Your phone displays Wait for tone, then press OK. Wait for the tone,
then press OK.
4
Your phone displays Wait for tone, press OK again. Wait for the tone,
then press OK.
[ 52 ]
Advanced calling features
This procedure may not work with all calling cards. Follow the directions
on the back of your calling card or contact your long distance company
for more information.
Work with two phone lines
If your particular SIM card supports it, your phone can have two phone
lines. Contact your service provider about this feature.
If you decide to use two phone lines, you can select one of the two lines
for outgoing calls, but you can still answer calls on both lines.
To switch from line 1 to line 2:
1
At the Start screen, press and hold
Change the phone line? appears.
Press OK.
.
2
Line 2 selected appears briefly and the number 2 appears in the
display’s upper left corner.
If you use two phone lines, you may be given a voice mailbox number for
each line so you will need to save each phone line’s voice mailbox number
separately.
11
To do this, follow steps 1 and 2 above and select the outgoing line. Then,
the other line and save its voice mailbox number.
• USE VOICE DIALING
Your phone’s voice dialing feature lets you dial a number using your voice.
Before using this feature, you need to create entries in the phone book so
you can associate a "voice tag" with the name you wish to dial.
Add a voice tag to a phone book entry
To create entries in the phone book, see “Save names and numbers” on
page 30. By this time you should be familiar with the phone book. If not,
1
At the Start screen, press Menu and then Select.
[ 53 ]
2
3
4
Scroll to Voice tags and press Select.
When Add voice tag appears highlighted, press Select.
Scroll to the phone book entry that you want to give a voice tag and
press Add.
5
When Press start, then speak after tone
appears, hold the phone up to your ear
and press Start. You hear several beeps,
and Please speak now appears.
6
Speak clearly into the microphone.
Tip: Do NOT press Quit when
you’re finished.
The phone automatically stops recording and then saves and replays the
voice tag.
If recording is not successful, your phone
11
displays Voice system error.
Press Add, and repeat steps 5 - 6.
Warning: Do not rely only on a voice tag for dialing emergency
numbers. In emergencies, stress causes changes in your voice,
which may keep the phone from recognizing the command.
Notes about voice tags
•
Voice tags are not language dependent. Any clearly spoken word or
phrase can serve as a voice tag.
•
It’s easier for the phone to differentiate between long, unique voice
tags. For example you might want to record a person’s first and last
names rather than only the first name.
•
Voice tags must be shorter than 2 seconds.
[ 54 ]
Advanced calling features
•
Voice tags are sensitive to background noise. For best results, record
them in a quiet environment.
•
•
If you delete a name, any associated voice tag is also deleted.
The recording process stops automatically. Pressing Quit aborts the
recording attempt.
•
•
If you try to record a voice tag, and Voice tag memory full appears,
you must erase a current voice tag to make room for the new one.
If your phone is in the Silent or Discreet profiles you will not hear the
beeps when you record a voice tag.
Make a call using voice recognition
1
Hold the phone up to your ear, then press and hold Menu.
When you hear several beeps and Please speak now appears, release
the button.
11
2
Pronounce the voice tag clearly into the microphone.
Searching appears. When the phone finds the voice tag, Found
appears, and the phone automatically dials the number.
If the phone does not locate a number, No match found. Try again?
appears.
3
Press Yes to try again.
OR
Press
to cancel and return to the Start screen.
Tip: If you’re using the headset and the phone does not locate the
number, you will hear an error tone and No match found appears.
Play back a voice tag
1
Press Menu and then Select.
2
Scroll to Voice tags and press Select.
[ 55 ]
3
4
Scroll to Playback and press Select.
Scroll to the name with the voice tag you want and press Playback.
Change a voice tag
1
2
3
4
Press Menu and then Select.
Scroll to Voice tags and press Select.
Scroll to Change and press Select.
Scroll to the name with the voice tag you want to change and press
Change.
5
When Press start, then speak after tone appears, hold the phone up
to your ear and press Start.
6
The phone repeats your voice tag, and
Voice tag changed appears.
11
Erase a voice tag
1
2
3
4
Press Menu and then Select.
Scroll to Voice tags and press Select.
Scroll to Erase and press Select.
Scroll to the name with the voice tag you want to erase and press
Erase.
5
6
When Erase voice tag? appears, press OK to erase the voice tag.
The phone erases the voice tag and Voice
tag erased appears.
[ 56 ]
Advanced calling features
• 1-TOUCH DIALING
Assign a name and number to a 1-touch dial location so that when you
press this key, the associated number automatically dials.
Tip: The first nine numbers stored in SIM memory are automatically
stored in keys 2 through 9 as 1-touch dial numbers. You can assign
new numbers to the keys, but the names and numbers must be
already stored in the phone book. Refer to “Phone book” on
page 30 for more information.
Key 1 can be set up to access your voice mail. Check with your
service provider for details. Also, any key can be set up to dial
emergency numbers such as 911.
Assign a number to a 1-touch dial key
1
Press Menu and then Select.
2
Scroll to 1-touch dialing and press Select.
11
Key 2 appears along with the first phone number that is saved in SIM
Memory.
3
4
If you want to assign this phone book entry to Key 2, press Assign.
OR
Press
or
to choose another key, then press Assign.
The list of names saved in the phone book appears.
Scroll to the phone book entry you want
to assign to the key and press OK.
A confirmation message appears.
below to edit the number if needed.
Call a 1-touch dial number
•
Press and hold the appropriate key, or press the key then press Call.
The phone dials the number.
[ 57 ]
Change 1-touch dialing numbers
1
2
3
4
5
Press Menu and then Select.
Scroll to 1-touch dialing and press Select.
Scroll to the key that you want to change and press Options.
Scroll to Change and press Select.
Scroll to the new name you want to assign to this key and press OK.
Erase 1-touch dialing numbers
1
2
3
4
5
Press Menu and then Select.
Scroll to 1-touch dialing and press Select.
Scroll to the key that you want to erase and press Options.
Scroll to Erase and press Select.
Press OK to confirm or
to return to the list of 1-touch numbers.
11
• MAKE AN INTERNATIONAL CALL
1
Press
twice to enter the international dialing prefix (+).
2
Enter the country code, area code, and phone number, and press Call.
• CALL TIMERS
The phone automatically tracks the amount
of time you’ve spent on calls.
If you have two phone lines
If you have subscribed to a second phone
page 53), a separate call timer is available for each of your phone lines.
When you view call timers, the call timers that are shown are for the
currently selected outgoing line. However, if you view call timers while
you are in a call, the call timers that are shown are for the line you are
using at that moment.
[ 58 ]
Advanced calling features
View the call duration
1
Press Menu 3 5.
Call timers appears briefly, then Last call appears along with the
duration of your last call.
2
Scroll to display the following options:
•
All calls....................Shows the total duration of all calls since the
last reset.
•
•
•
Received calls........Shows the total duration of all received calls.
Dialed calls.............Shows the total duration of all dialed calls.
Clear timers ...........Resets all timers to zero.
Reset call timers to 0
1
Press Menu 3 5 5.
Clear timers appears.
11
2
Enter your security code, then press OK.
Show call timer during calls
1
Press Menu 3 5.
2
Scroll to Last call, then press Details.
Current call is displayed.
Press Select.
3
4
Scroll to On, then press OK.
During a call, the amount of time spent in that call is displayed.
Note: The actual time invoiced for calls by your service provider may
vary, depending on network features, rounding-off for billing, and
so forth.
[ 59 ]
12 Customizing your phone
• PROFILES
Profiles let you personalize your phone’s
sound and display settings. Each profile
contains settings for:
•
•
•
•
•
•
•
•
•
ringing tone
ringing volume
ringing options
message alert tone
keypad tones
warning tones
vibrating alert
screen saver
12
rename
Just pick the profile that suits you: Normal, Silent, Discreet, or Loud.
Or download a profile from the Internet and place it in "empty."
You can modify the settings in each profile, and you can rename the
profile (except for Normal).
Select a profile
1
Press Menu 4.
2
Scroll to the profile you want to use (for example, Discreet) and press
Select.
Select appears highlighted.
3
Press OK.
[ 60 ]
Customizing your phone
Customize the profile
1
2
3
4
Press Menu 4.
Scroll to the profile you want to customize (for example, Discreet).
Press Select.
Scroll to Customize, then press OK.
The customize options appear.
Ringing tone
Ringing volume
Ringing options
Message alert tone
Keypad tones
Warning tones
Vibrating alert
Screen saver
Profile =
Rename
RINGING TONE
Your phone has up to 56 ringing tones available:
•
•
•
35 pre-programmed tones
20 slots for downloaded tones
12
One slot for your "Own tone" created with Composer. (See “Ringing
1
2
Press Menu 4.
Scroll to the profile for which you want to set the ringing tones, and
press Select.
3
4
5
Scroll to Customize and press OK.
When Ringing tone appears, press Select.
Scroll to the ringing tone you want, then pause to hear a sample of
the tone.
6
Press OK to select the tone or continue scrolling to select a different
tone.
Tip: If you created a tone with Composer, select Own tone.
To download a tone from the Internet, see “Download ringing
[ 61 ]
RINGING VOLUME
This feature sets the ringing volume for
incoming voice calls and message alert
tones.
1
2
Press Menu 4.
Scroll to the profile whose ringing
volume you want to set, then press Select.
3
4
5
Scroll to Customize, then press OK.
Scroll to Ringing volume, then press Select.
Scroll to the volume level you wish to use, then pause to hear a
sample of the volume.
6
Press OK to select the volume or continue scrolling to select a
different volume.
Note: If you select Level 5, you see a note stating VERY LOUD
RINGING. Press OK to confirm the setting. Also when you
select Level 5, the phone starts ringing at Level 4, then ascends
to Level 5.
12
RINGING OPTIONS
Choose how a profile notifies you of an incoming call.
1
Scroll to one of the following, and press OK.
Ring: The phone rings.
Ascending: The ringing volume starts low and increases with
successive rings.
Ring once: The phone rings once.
Beep once: The phone makes a short beep.
Silent: The phone sounds no tone. Keypad tones, warning tones, and
message alert tones are turned off, and the
icon appears at the top
of the screen.
[ 62 ]
Customizing your phone
MESSAGE ALERT TONE
This option sets the tone your phone makes when you get a text message.
1
2
Press Menu 4.
Scroll to the profile whose message alert tone you want to set, then
press Select. Scroll to Customize, then press OK.
3
4
Scroll to Message alert tone, then press Select.
Scroll through the tones until you hear one you like, then press OK.
KEYPAD TONES
This option sets the volume of the tone you hear when you press the
phone’s keys.
1
2
Press Menu 4.
Scroll to the profile whose keypad tones you want to set, then
press Select.
3
4
5
Scroll to Customize, then press OK.
Scroll to Keypad tones, then press Select.
12
Scroll through the choices until you hear the volume level you want,
then press OK.
WARNING TONES
Warning tones are sounds your phone makes for conditions such as errors,
confirmations, power on, battery low, and recharge battery.
1
2
Press Menu 4.
Scroll to the profile for which you want to set the warning tones, then
press Select.
3
4
5
Scroll to Customize and press OK.
Scroll to Warning tones, then press Select.
Scroll to On or Off, then press OK.
[ 63 ]
VIBRATING ALERT
Your phone has an internal vibrating mechanism. No special battery is
needed to make the phone vibrate when someone calls you.
1
2
Press Menu 4.
Scroll to the profile for which you want to set the vibrating alert, and
press Select.
3
4
5
Highlight Customize and press OK.
Scroll to Vibrating alert, then press Select.
Scroll to On or Off and press OK.
If you choose On, your phone vibrates even if you have set Ringing
SCREEN SAVER
Choose one of 14 pictures for your display. You can choose the timeout
duration so the picture appears after a pause of only 5 seconds or as long
as 10 minutes. Then, the picture stays visible until you press any key. Check
with your service provider for details.
12
•
•
•
All pictures are available for use as picture messages. See “Picture
Pictures 9 through 14 are animated. You can also send them as a non-
animated picture that’s part of a picture message.
You can replace pictures 9 through 14 with other animated pictures
downloaded from the internet via WAP.
Activate Screen saver
1
2
Press Menu 4.
Scroll to the profile whose screen saver you want to set, then press
Select.
3
4
5
Scroll to Customize, then press OK.
Scroll to Screen saver, then press Select.
Scroll to On and press OK.
[ 64 ]
Customizing your phone
Choose a Screen saver picture
1
Follow steps 1 through 4 above.
2
Scroll to Screen saver and press OK.
A picture appears. To use this picture, press Use.
A confirmation message appears. Press and hold
start screen.
to return to the
OR
Press
or
to select another picture.
Change a Screen saver picture
1
2
3
4
Follow steps 1 - 4 in “Activate Screen saver.”
Scroll to Screen saver and press Select.
Press
Press Use to select the new picture.
Done appears as confirmation, then Screen saver appears highlighted.
Press and hold to return to the start screen.
or
to see other pictures.
5
12
Set the timeout
1
Press Menu 4.
2
Scroll to the profile whose screen saver you want to set, then press
Select.
3
4
5
6
Scroll to Customize, then press OK.
Scroll to Screen saver, then press Select.
Scroll to Timeout and press OK.
Scroll to the time you want (from 5 seconds to 10 minutes) and press OK.
Timeout selected appears.
7
Press and hold
to return to the Start screen.
[ 65 ]
Rename a profile
1
2
3
4
5
Press Menu 4.
Scroll to the profile you want to rename and press Select.
Scroll to Customize and press OK.
Scroll to Rename and press Select.
Enter the new profile name, then press OK.
• RESTORE FACTORY SETTINGS
You can use Menu 5 5 9 to reset some of the phone settings to their
original values. You must enter the security code.
Note: Restoring factory settings does not erase your phone book,
language settings, counters, or game scores. However, it does erase
all customized settings you may have entered.
• CHOOSE THE DISPLAY LANGUAGE
You can choose your phone’s display
language.
12
1
2
Press Menu 5 5 1.
Scroll to the language you want, then
press OK.
OR
Scroll to Automatic and press OK. The language will be set automatically
by the SIM card.
• SET UP THE CLOCK
Your phone has an internal clock that can be
displayed on the Start screen. It also features
[ 66 ]
Customizing your phone
Set the clock
1
2
Press Menu 5 2 2.
Enter the current time, using two digits for both hours and minutes.
OR
Enter hours and minutes in 24-hour format.
Press OK.
3
4
Select am or pm and press OK.
Note: If you entered the time in the 24-hour format, am and
pm do not appear.
If this is the first time you have set the clock, the phone asks you to enter
the date. Enter the date in mm/dd/yyyy format and press OK.
Select the time format
1
2
3
Press Menu 5 2 3.
Scroll to 24-hour or am/pm.
Press OK.
12
Display the clock
This feature lets you continuously display the time on the Start screen.
1
Press Menu 5 2 1.
Either Clock hidden or Clock shown appears as confirmation,
depending on the current setting.
2
Press and hold
to return to the Start screen.
++
Set automatic update of date and time
If this feature is supported by your wireless service provider, it automatically
updates the clock in your phone in accordance with the current time zone.
Press Menu 5 3 and choose:
•
•
•
On: Updates the date and time automatically.
Confirm first: Requires you to confirm that you want the update.
Off: Prevents the date and time from being automatically updated.
[ 67 ]
13 Security features
• LOCK THE KEYPAD (KEYGUARD)
The keypad lock (Keyguard) disables your
keypad to prevent accidental key presses
(for example, when your phone is in your
pocket or purse).
Caution: Keyguard does not prevent
unauthorized use of your phone.
Lock/unlock the keys
•
To lock the keys, press Menu, then
.
•
To unlock the keys, press Unlock, then
.
Note: Connecting your phone to a car kit automatically disables
Keyguard. Also, Keyguard is automatically disabled during an
incoming call, when the alarm is sounding, or when dialing an
emergency number (such as 112 or 911).
13
• PIN AND PUK CODES
The following table summarizes how different types of security codes are
used in your phone.
For more
information
Code
Purpose
Security code Required by several phone
See entries for call
features. If phone security is timers, calling card,
on, the phone requests the
security code the first time
you use it after installing a
new SIM card.
phone book, and
phone security.
[ 68 ]
Security features
For more
information
Code
PIN code
Purpose
every time the phone is
turned on.
PIN2 code
Required by several phone
features.
See entries for fixed
dialing, and PIN and
PIN2 codes.
System
password
PIN codes
The PIN (Personal Identity Number) and PIN2 codes are 4- to 8-digit
numbers that usually come from your service provider along with the
SIM card. Use the PIN code to protect your phone and SIM card against
unauthorized use. The PIN2 code activates some of your phone’s functions.
When the phone requires the PIN or PIN2 code, it displays Enter PIN code:
or Enter PIN2 code:.
13
•
Enter the code then press OK.
CHANGE YOUR PIN OR PIN2 CODE
The default PIN code is 1234, and the default PIN2 code is 5678. You can
change your PIN or PIN2 code to any 4- to 8-digit number.
1
Press Menu 5 6 5.
When Change PIN code appears, press Select.
Note: If SIM card security is not set to on, you’ll be prompted to
2
3
4
Enter the current PIN code and press OK.
Enter the new PIN code and press OK.
Enter the new PIN code again to verify, and press OK.
[ 69 ]
Tip: If you make a mistake while entering the code, Code Error
appears. Start again at step 2 and be careful to enter the correct
code. If you enter the wrong code three times in a row, the PIN code
SET SIM CARD SECURITY
This feature sets your phone to ask for the PIN code each time the phone
is switched on and prevents unauthorized use of your phone.
1
2
Press Menu 5 6 1.
When Enter PIN code appears, enter the PIN code supplied by your
service provider, and press OK.
3
Press (up or down) to highlight On and press OK.
To turn off this feature, repeat steps 1 through 3 above, but highlight Off
in step 3.
Caution: If you enter the wrong PIN or PIN2 code three times in a
row, the SIM card is automatically blocked or you cannot activate
the function. See "PUK codes" below to unblock the codes.
PUK codes
The PUK (Personal Unblocking Key) and PUK2 codes are 4- to 8-digit codes
obtained from your service provider. The PUK code unblocks a blocked PIN
code, and the PUK2 code unblocks a blocked PIN2 code.
13
UNBLOCK A PIN CODE
1
Press Menu 5 6 5, then press Select.
Change PIN code appears.
To unblock the PIN2 code, press
Press Select.
2
3
to select Change PIN2 code.
PIN code blocked appears.
Enter the PUK code, then press OK.
4
Caution: If you enter a wrong PUK code ten times in a row, the SIM
card becomes invalid and you must contact your service provider
for a new card.
[ 70 ]
Security features
5
6
Enter the new PIN code, then press OK.
Enter the new PIN code again to verify, and press OK.
Caution: You cannot change the PUK or PUK2 code, so keep a
record of them in a safe place. If you lose them, contact your
service provider.
If you try to change the PIN2 code, and you enter a wrong PUK2
code ten times in succession, you can’t use functions requiring the
PIN2 code. Contact your service provider for a new SIM card.
• SECURITY CODE
You need the security code to access some security features. When the
phone requires the security code, it displays Security code:.
•
Enter the code then press OK.
If you enter an incorrect security code five times in a row, the phone will
not accept the correct code for 5 minutes.
The default security code that comes with your phone is 12345. To change
the security code:
13
1
2
3
4
5
Press Menu 5 6 5, then press Select.
Scroll to Change security code and press Select.
Enter the current security code, then press OK.
Enter the new security code, then press OK.
Enter the security code again to verify, then press OK.
Keep the code secret and in a safe place, separate from the phone.
++
• FIXED DIALING
If supported by your SIM card, this feature lets you restrict your outgoing
calls to phone numbers included in the fixed dialing list or beginning with
the same digit(s) as an entry in the list. Check with your service provider
for more information.
[ 71 ]
Caution: If you turn fixed dialing on and don’t have any numbers
in the fixed dialing list, you can’t make any calls!
Note: When fixed dialing is set to on, calls may be possible to
certain emergency numbers in some networks (such as 911 or other
official emergency numbers).
Turn fixed dialing on or off
1
2
3
Press Menu 5 6 4.
Scroll to On or Off, then press OK.
Enter your PIN2 code, then press OK.
Add numbers to the fixed dialing list
1
2
3
4
5
6
Press Menu 5 6 4.
Scroll to Numbers, then press OK.
Scroll to Add, then press Select.
Enter your PIN2 code and press OK.
Enter a name to go with the number, then press OK.
Enter the phone number you want to allow to be dialed, then press OK.
13
Repeat steps 3 through 6 for each number you want to add to the list.
++
• RESTRICTING CALLS
This is a network service that lets you restrict the calls your phone can
make and receive. Check with your service provider for details.
Note: When calls are restricted, calls may be possible to certain
emergency numbers in some networks (such as 911 or other official
emergency number).
Turn on call restrictions
1
2
Press Menu 5 6 3.
Scroll through the types of calls you can restrict, and press Select
when you see the one you want.
[ 72 ]
Security features
Outgoing calls: Calls cannot be made.
International calls: Calls cannot be made to foreign countries.
International except to home country: When abroad, calls can
be made only within the current country and to your home country
(that is, the country where your home network operator is located.)
Incoming calls: Calls cannot be received.
Incoming calls if roaming: Calls cannot be received outside your
home area.
Cancel all call restrictions: Turns off all call restrictions. Calls can be
made and received in the usual way.
Note: If you selected Cancel all call restrictions, the following
steps are not available. Also, you can cancel call restrictions on
each option, allowing restrictions on other options to stay in force.
3
4
Scroll to one of the following options:
Activate: Enter the restriction password and press OK.
Cancel: Enter the restriction password and press OK.
Status: The phone lists the call types with call restriction active.
Press OK.
13
For more information about your restriction password, see “Restricting
++
• SET UP A CLOSED USER GROUP
This network service specifies the group of people to whom you can call
and who can call you. Preset resets the phone to a user group that the
SIM card owner has agreed upon with the service provider.
Note: When calls are limited to closed user groups, calls may be
possible to certain emergency numbers in some networks (such as
911 or other official emergency number).
[ 73 ]
14 Select a system
You can select how your phone chooses a wireless network, as there may
be more than one available. The selection you make stays active until you
change it or change the SIM card.
1
2
•
Press Menu 5 5 4.
Scroll to Automatic or Manual, then press Select.
Automatic: The phone automatically selects one of the available
systems.
•
Manual: The phone searches for available systems and then lists
them. Scroll to the one you want, then press Select. The phone looks
for a network and displays the result. If you lose connection while in
Manual mode, the phone asks you to select a network again.
14
[ 74 ]
WAP Services++
15 WAP Services++
Important: Check with your service provider for availability of
WAP services.
WAP (short for Wireless Application Protocol) is to mobile devices what
WWW (world wide web) is to desktop computers. The mobile community
began developing WAP several years ago to give mobile device users
access to the internet. Today, most WAP sites are made up of text and
hyperlinks, with some capable of text input and selection items in a list.
Some pages even contain low-resolution graphics. Because your service
provider and others are free to design WAP sites as they choose, each site
can vary almost as much as a web page on the Internet.
• WAP SETTINGS
Note: Depending on your network or service provider’s WAP
settings, some of the following menu items may not be accessible.
It shouldn’t be necessary to manually configure your phone for browsing.
Normally your service provider will modify these settings once you’ve
subscribed to this feature. However, some network operators or service
providers may allow you to set up the phone for browsing.
The connection settings may come as a text message. Or, you may be able
to enter the settings manually. The WAP settings may be available, for
example, on the Web site of the network operator or service provider. For
appropriate settings, contact your network operator or service provider.
15
Save settings as a text message
1
When you receive the settings, Service settings received appears.
2
Press Options, scroll to Save and press Select.
Enter the settings manually
1
Press Menu 11, scroll to Settings, and press Select.
Connection settings appears.
[ 75 ]
2
Press Select and scroll to a set of connection settings.
For example: Set 1.
3
4
Press Options and scroll to Edit.
Scroll to each of the settings and enter information as shown below.
Make all the required settings one by one. For appropriate settings,
contact your network operator or service provider.
•
•
•
Homepage: Enter the homepage address of the WAP service you want
to use and press OK.
Connection type: Scroll to Continuous or Temporary and press
Select.
Connection security: Scroll to On or Off and press Select.
When the connection security is on, the phone tries to use a secure
connection with the WAP service. If a secure connection is not
available, the connection will not be made. If you want to connect
anyway with a non-secure connection, set the connection security
to Off.
•
•
•
•
•
•
5
Dial-up number: Enter the number and press OK.
IP address: Enter the address and press OK.
Authentication type: Scroll to Secure or Normal and press Select.
Data call type: Scroll to Analog or ISDN and press Select.
User name: Enter the user name and password and press OK.
Password: Enter your password and press OK.
15
After you have made all the required settings, you can change the
set’s name. Press
and then Options, scroll to Rename, and press
Select. Enter the name and press OK.
Activate the settings
1
Press Menu 11, scroll to Settings and press Select.
Connection settings appears.
2
Press Select and scroll to the appropriate set. For example: Set 1
[ 76 ]
WAP Services++
3
4
Press Select.
Activate appears highlighted.
Press Select.
A confirmation message appears,: Selected set: Set 1. Then the phone
returns to the Connection settings menu.
5
Press and hold
to return to the Start screen.
The settings are now saved and you can connect to the WAP service.
• CONNECT TO THE WAP SERVICE
It’s likely that your service provider has created their own home page and
configured your browser to go to this page when you press Home on the
browser’s menu. Once at your service provider’s home page, you’ll find
links to a number of other WAP sites.
Note: Some service providers may have customized the Services
menu and/or WAP page’s Options menu. Please contact your
service provider for more information, in the event that any of the
connection options are unavailable.
There are three ways to make a connection.
Home page
•
Press Menu 11, scroll to Home and press Select.
15
The phone automatically begins dialing your service provider.
Bookmarks
•
Press Menu 11, scroll to Bookmarks and press Select. For more
Enter the address of the WAP service
•
Press Menu 11, scroll to Go to address, and press Select. Enter the
WAP services address and press OK.
For example: www.nokia.com
[ 77 ]
• BROWSE PAGES IN THE WAP SERVICE
Now you can start browsing (or looking through) the WAP services pages.
The function of the phone keys may vary between WAP service providers.
Follow directions as they appear in the display. For more information,
contact your WAP service provider.
Navigating a WAP page
Elements common to most pages:
•
Header line - shows the current location.
•
Active hyperlink - highlighted and awaiting
a press of the
or
keys.
•
Hyperlink - used to navigate to other pages
or sites. Scroll to select the link and press
or
.
• Text - use
or
to scroll through the
text. The cursor will automatically jump to
the next hyperlink to activate it.
• Selection list - identified by text in
brackets. Press
or
on this link to
display additional choices or links.
15
• Options - Displays a page’s options menu
and/or the browser menu. Press
to go
back to the previous page.
•
Data entry field - identified by ellipse in
brackets [...]. This field is used when
specific user input is required (example: city
name, stock symbol, airline name or flight
number, etc.). To edit this field:
[ 78 ]
WAP Services++
1
2
Highlight the data entry field and press
or
.
Enter the text requested by the data entry
field (for example: Miami) and press OK.
The text you entered now appears between
the brackets.
3
Scroll to the link that requires an action (For example: get forecast?)
and press or
.
The browser menu
1
2
•
At the Start screen, press Menu 11.
Scroll to any of the following menu items and press Select.
Home: Starts the browser and takes you to your service provider’s
home page.
•
•
•
Bookmarks: Displays a list of all saved bookmarks.
Service inbox: Contains messages received through WAP.
Settings: From here you can modify your connection settings,
appearance settings, and Security certificate more.
•
•
Go to address: Allows you to enter the address of your choice.
Clear cache: Empties the browser’s temporary memory and frees up
15
space. It’s advisable to empty your cache at the end of each session.
Note: Some service providers may have customized the Services
menu and/or WAP page’s Options menu. Please contact your
service provider for more information, in the event that any of
the above menu options are unavailable.
Use the keys
•
Use
or
to browse the WAP page and highlight the desired
Item. The item can be, for example, underlined text in a “link.”
•
Press
or
to select a highlighted item.
[ 79 ]
The “world” icon rotates while the page downloads from the WAP
server.
•
•
•
Press
Press and hold
Press and
special characters.
to go back to the WAP page that you viewed previously.
to disconnect from the WAP service.
to enter letters and numbers and
to enter
•
Press Options to display the following options. Scroll to the option
you want and press Select.
Home: Takes you back to the homepage of the WAP service.
Reload: Refreshes the WAP page.
Select: Selects a link or any other highlighted item on the WAP page.
Back: Takes you back to the WAP page that you previously viewed.
Appear. sett.: You can wrap the text and hide the images on the WAP
page. For details, see “Adjust the appearance settings of WAP pages”
Service inbox: Contains messages received through WAP.
Use number: Copies a phone number from the current WAP page to
your phone for saving or calling and then ends the WAP session. If the
WAP page has several numbers, you can select the one you want.
15
Go to address: Connect to any WAP page by entering the WAP
address and pressing OK.
Security info: Shows if the connection is secure.
Exit: Quits browsing and ends the call.
[ 80 ]
WAP Services++
Handle a call while browsing
Note: If you receive a call while browsing, you must end the WAP
connection to answer the call.
When the phone receives a call, the message waiting and the incoming
caller’s phone number appears.
For example: waiting 8885551232.
You have about 20 seconds to answer the call. If you do not answer, the
call may be forwarded to voice mail or the caller may be asked to try again
later.
ANSWER THE CALL:
1
Press and hold
to end the WAP connection.
Calling flashes in the display, and the incoming caller’s phone number
appears again.
2
Press Answer to answer the call.
Note: To answer the call and keep the last WAP page in view, press
Options, scroll to End active call, and press Select. Call ended
appears, followed by the last WAP page you were viewing when
you received the call.
IGNORE THE CALL:
Take no action and continue browsing.
15
Note: You can set up call forwarding to send the call to your voice
mailbox. See “Call forwarding++” on page 48.
When you end your WAP connection, Missed call appears. Press List to
see details about the missed call. See “Check for missed calls” on page 36
for more information.
RETURN TO WAP SERVICES
Connect to WAP services as described in “Connect to the WAP service” on
[ 81 ]
End the WAP connection
1
Press Options, scroll to Exit and press Select.
Quit browsing? appears.
2
Press Yes to end the session.
Adjust the appearance settings of WAP pages
1
2
3
Press Menu 11.
Scroll to Settings and press Select.
Scroll to Appearance settings and press Select.
Text wrapping appears.
The text wrapping feature makes text lines “wrap” to the next line if
they’re too long for one line.
4
5
Press Select and choose Yes or No, then scroll to Show images.
Set Show Images to show pictures appearing on WAP pages. This may
speed up the browsing of WAP pages that contain a lot of pictures.
Press and hold
to return to the Start screen.
Save and manage bookmarks
Bookmarks are shortcuts to WAP pages. You can create a new bookmark
even without being connected to the WAP service.
15
Note: Make sure the currently active set of connection settings
can be used with the WAP page you want. If the bookmark does
not work, Change service settings may appear. Change the
connection settings and try again.
WITH NO WAP CONNECTION
1
Press Menu 11. When the Services Options menu appears, scroll to
Bookmarks and press Select.
If there are no bookmarks stored, (no bookmks) appears.
Press Options.
2
Add bookmark appears.
[ 82 ]
WAP Services++
3
4
Enter the address of the WAP page and press OK.
Write a name for the WAP page and press OK.
DURING A WAP CONNECTION
Use the Save bookmark function to save the current WAP page as a
bookmark.
1
Press Options, scroll to Bookmarks and press Select.
If there are no bookmarks stored, (no bookmks) appears.
Press Options and scroll to Save bookmk. and press Select.
Bookmark saved appears.
2
USE OTHER BOOKMARK FUNCTIONS
•
Go to: Makes a connection to the WAP page intended for that
bookmark.
•
•
•
Edit: Lets you make changes as needed to a bookmark.
Erase: Deletes the bookmark.
Send bookmk.: Use this feature to send a bookmark to another WAP-
enabled device.
•
•
Add bookmark: Let’s you manually enter a new bookmark for later use.
Save bookmk.: Places a bookmark in the phone’s memory for the web
page currently in view.
15
Empty the cache memory
Your phone temporarily stores information received during a WAP connection,
including confidential information requiring passwords. You can erase
this information from your phone to prevent unauthorized access.
1
2
Press Menu 11, and scroll to Clear cache.
Press Select.
Cache cleared appears.
[ 83 ]
Security certificates
For some WAP service such as banking services, you need a security
certificate. The security certificate helps you improve the security of
the connection between your phone and a WAP gateway or server.
Note: You must set the Connection security option to On.
You can download the certificate from a WAP page and then view, save,
or delete it. If you save it, the certificate is stored in your phone. Then the
phone uses the certificate to verify the identity of that WAP server when
you return to it. The phone alerts you if the identity of a WAP server or
gateway can not be verified, or if you don’t have the correct certificate
stored in your phone.
Important: Internet content received over a secure connection and
stored in your browser's cache may be reused over non-secure
connections and may create security issues. Please check with your
service provider to determine if emptying your browser's cache
after each browsing session or some other method should be used
to avoid security issues.
TO VIEW THE LIST OF SECURITY CERTIFICATES:
1
2
3
Press Menu 11 and scroll to Settings.
Press Select and scroll to Security certificates.
Press Select.
15
If the security icon appears during a WAP connection, it indicates that the
data transmission between the phone and the WAP gateway or server is
encrypted and secure. However, the icon does not indicate that the data
transmission between the gateway and the content server is secure. It’s
up to the service provider to secure the data transmission between the
gateway and the content server.
[ 84 ]
Messages++
16 Messages++
The message network service allows you to
send short text messages to any device that
can receive this information, such as
computers, fax machines, and pagers.
• SAVE MESSAGE SETTINGS
Before you can send and receive messages, you must:
•
•
•
Have a text or email message subscription through your service provider.
Know your message center number (check with service provider).
Save your message center number in your phone.
Save your message center number
Note: Get this number from your wireless service provider.
1
Press Menu 2 7.
The Messages settings menu appears,
followed by the settings programmed in
your phone.
2
Scroll to the set of message settings
you want to use (the first one is the
default), then press Select.
16
Message center number appears.
Press Select.
3
4
Enter your message center number, then press OK.
[ 85 ]
Set the message mode
You must specify the way your phone sends messages: text messages,
faxes, pages, or E-mail messages.
1
2
3
4
Press Menu 2 7.
Scroll to the set you want to change the settings for, then press Select.
Scroll to Messages sent as and press Select.
Scroll to Text, Fax, Page, or E-mail, then press OK. (In order to receive
a converted message, the recipient needs to have the appropriate
terminal device, such as a fax machine, pager, or e-mail account.)
Set message validity
Message validity is a network feature that determines the amount of time
that your service provider’s message center attempts to deliver a message.
1
2
3
4
Press Menu 2 7.
Scroll to the set you want to change the settings for, then press Select.
Scroll to Message Validity and press Select.
Choose a time, then press OK.
• WRITING MESSAGES
Be sure to set message mode before typing in message.
Using standard text input
16
Be sure to set message mode as above. When you select this mode, the
ABC icon appears as visual confirmation.
1
2
Find the key with the letter you want to enter.
Press it as many times as needed for the letter to appear on the screen.
[ 86 ]
Messages++
For example, to enter the name John:
Press
Press
Press
Press
J
O
H
N
See “Standard text input” on page 27. for more information.
Using predictive text input
Predictive text input is the default mode. This method allows you to write
text using a built-in dictionary. You can also add new words to the
dictionary. With predictive text input, you only need to press each number
key once for each letter.
For example, to write Nokia with the English dictionary selected:
(for N)
(for o)
(for k)
(for i)
(for a)
The display shows the above words for each key pressed.
Since the displayed word changes after each key stroke, disregard the
word until you have keyed in all the characters.
16
[ 87 ]
Predictive text input tools
-
Use for word entry. Press each key only once for each
letter.
Press to view the next matching word if the underlined
word is not the word you intended.
Spell
Press to add a new word to the dictionary.
Press once to accept a word and add a space.
Press and hold to enter a number.
that you can input numbers.
indicates
Press to change the character case.
indicates
uppercase.
indicates lowercase.
Press to select predictive input or standard text input.
and
,
indicate standard text input.
, and indicate predictive text
input.
Press once to delete the character to the left of the
cursor. Press and hold to clear the entire screen.
Press once to add a punctuation mark. To change the
16
underlined symbol, press
desired symbol appears.
repeatedly until the
459/1
Character counter. Shows the maximum number of
characters available (up to 459, depending on the
service provider). Appears in the top right corner of the
screen and counts down for each character added.
[ 88 ]
Messages++
SELECT A LANGUAGE AND TURN ON PREDICTIVE TEXT INPUT
1
2
3
4
Press Menu 2.
Scroll to Write messages, then press Select.
Press Options, scroll to Dictionary, then press OK.
Scroll to the language you want, then press OK.
Dictionary activated appears.
TURN OFF PREDICTIVE TEXT INPUT
•
1
2
To switch from predictive text input to traditional text input:
Repeat steps 1 through 3 above.
Scroll to Dictionary off and press Select.
OR
•
While writing the message, press
text input and standard text input.
to switch between predictive
WRITE WITH PREDICTIVE TEXT INPUT
1
Press each key once for each letter.
For example, to write “Hello” press
,
,
,
,
.
•
•
Do not pay attention to the word
on the screen until you have
finished writing the word.
16
Refer to the character counter in the top right of the screen.
The counter shows how many characters are available.
•
•
•
•
•
Press
Press and hold
Press to change the character case.
Press and hold the respective number key to insert a number.
to delete a character.
to clear the entire screen.
Press
to insert a punctuation mark. If it is not correct, press
repeatedly to find the desired punctuation mark.
[ 89 ]
•
To insert a symbol, press and hold
appears. Press or to move the cursor left or right to
select the desired symbol and press Insert.
. The symbol screen
Tip: Press to move the
cursor between rows
2
When you have finished writing,
check the underlined word to see if it
is the word you intended to write.
If the word is correct
•
Insert a punctuation mark, if needed. Then press
to confirm
the word, enter a space, and begin writing the next word.
If the word is not correct
•
Press
repeatedly until the desired word appears, then press
to confirm the word.
OR
•
Press Options, scroll to Matches, then press OK.
•
Scroll to the correct word and press Use.
•
Press
to confirm the word, enter a space, and begin writing
the next word.
•
Start writing the next word.
Note: When you enter a period to end a sentence, the phone
16
switches to
mode so the that the first letter in the
next word will be uppercase.
If the ? character appears after the word the word you intended to
write is not in the dictionary’s match list.
1
2
Press Spell.
Enter the word using standard text input (see “Standard text input”
3
Press OK to save the word.
[ 90 ]
Messages++
Note: If you need to exit while writing the message be sure to save
Menu 2 2 to return and finish writing the message. If you turn off
the phone without saving the message, the message will be lost.
ADD NEW WORDS TO THE DICTIONARY’S MATCH LIST
You can add new words to the dictionary.
1
Press Menu 2 3.
Write messages appears followed by a blank message screen.
2
3
Press Options and scroll to Spell mode.
page 27) to insert the word.
4
Press OK.
INSERT NUMBERS
1
To add a number to the message, press and hold
appears.
until
2
Key in the desired numbers, then press and hold
ABC mode.
to return to
INSERT SMILEYS
A smiley is a symbol composed of punctuation characters that indicate
how an email message should be interpreted. For example, this smiley
:-) represents a person who is smiling. It usually means that the message
is meant as a joke and shouldn't be taken seriously.
16
To insert smileys in your message:
1
2
Press Options.
Scroll to Insert smiley and press OK.
A list of five smileys appears.
Scroll to the smiley you want and press Select.
3
[ 91 ]
To create a smiley:
1
2
Press Menu 2 6.
Scroll to one of the spaces labeled (empty) and press Read.
The word (empty) appears at the top of the screen.
3
4
Press Options.
Edit appears highlighted
Press Select.
A blank message screen appears.
5
6
Press and hold
until the special characters screen appears.
Press
or
to highlight the first character for your smiley and
press Use.
The character appears in the message screen.
7
8
Continue selecting characters for your smiley. When you’re finished,
press Options and scroll to Save.
Press OK to save your smiley.
Your smiley now appears in the list with the others.
INSERT SYMBOLS
1
Press and
hold until the symbol screen appears.
OR
Press Options and scroll to Insert symbol.
16
2
Select the desired symbol and press Insert.
WRITE COMPOUND WORDS
1
Write the first part of the word and press
to accept it.
to enter the
2
Write the last part of the compound word and press
word in memory.
[ 92 ]
Messages++
Use Templates
The Nokia 3395 has five preset messages, or "templates," that you can use
for writing a message.
1
Press Menu 2 3.
Write messages appears followed by an open message screen.
Press Options, scroll to Templates, and press OK.
Scroll to the template you want and press Select.
2
3
4
When the template appears you can write the remainder of the
message as appropriate.
CREATE A TEMPLATE
You can create up to three templates.
1
Press Menu 2 5.
A list of current templates appears.
Scroll to one of the templates labeled (empty) and press Read.
Press Options, and when Edit appears highlighted, press Select.
Write a message of up to 40 characters.
Press Options and scroll to Save.
Press OK.
2
3
4
5
6
Template saved appears.
16
EDIT A TEMPLATE
1
Press Menu 2 5.
The template list appears.
2
3
Scroll to the template you want to edit and press Read.
Press Options.
When Edit appears highlighted, press Select.
Edit the template.
4
When you’re finished, press Options.
[ 93 ]
5
6
Scroll to Save and press OK.
Press to return to the Start screen.
Save messages in the outbox
When you write a text message, it’s a good idea to save it in the outbox.
Then if there is a message delivery problem, you can easily resend it.
1
2
While writing the message, press Options.
Scroll to Save, then press OK.
• SEND THE MESSAGE
Text messages
1
Press Menu 2 3.
Write messages appears briefly, followed by the message screen.
2
3
Enter a message. (The number of available characters appears in the
top right corner of the screen.)
Once you have finished writing, press Options.
When Send appears highlighted, press OK.
4
When the number block appears, enter
or recall the recipient’s phone number,
then press OK.
Tip: You may need to add a 1 to
the number. Check with your
service provider for details.
16
Sending message appears.
When the message is successfully sent, Message sent appears.
[ 94 ]
Messages++
E-mail messages
1
Repeat steps 1-3 on previous page.
2
When the E-mail address block appears,
enter the recipient’s e-mail address and
press OK.
Tip: To enter multiple e-mail addresses,
separate each address with a comma,
but no space.
3
4
When the Number block appears, enter
the E-mail number code for your service
provider and press OK.
Sending message appears.
When the message is successfully sent,
Message sent appears.
• RESEND A MESSAGE FROM THE OUTBOX
Messages in the outbox have one of two icons in front of them. The
icon in front of a message heading shows that you have attempted to
send the message to the text message center. The
have not yet tried to send the message.
icon shows that you
1
2
3
4
5
Press Menu 2 2.
Scroll to the message, then press Read.
Press Options.
16
Scroll to Forward and press OK.
Press Options.
Send appears already highlighted.
Press OK.
6
7
Enter the recipient’s phone number or e-mail address and press OK.
[ 95 ]
Note: If you’re sending an email, the Number block appears.
Enter the E-mail number code for your service provider and
press OK.
Sending message appears.
When the message is successfully sent, Message sent appears.
• READ MESSAGES
Read new messages now
When you receive a message, the phone displays Message received and
the
indicator, and makes a sound (depending on the “Message alert
1
2
To read the message, press Read.
This takes you to the Inbox, with the new message selected.
Press Read again to read the message.
Read new messages later
When you receive a message, the phone displays Message received and
the
indicator, and makes a sound (depending on the “Message alert
1
2
Press
Later when you want to read the message, press Menu 2 1.
A list of message headers is displayed. The icon indicates that a
icon in front of the header
to save the message to your Inbox.
16
message has not yet been read. The
indicates that a message has been read.
3
4
5
Scroll to the message you want, then press Read.
If the message is long, use the scroll keys to see the entire message.
Press
to see the sender’s name or phone number, reception date,
and time.
[ 96 ]
Messages++
• ERASE A MESSAGE
While reading a message
1
2
While reading the message, press Options.
When Erase appears highlighted, press OK.
Your phone asks you to confirm that you want to erase the message.
3
Press OK.
• REPLY TO A MESSAGE
While reading a message:
1
2
3
Press Options.
Scroll to Reply, then press OK.
Enter your message.
OR
Press Options, scroll to Template, select a template and enter your
message.
4
Press Options, scroll to Send, then press OK.
If replying to a text message:
•
•
The phone displays the return number
Edit the number if needed, then press OK.
16
If replying to an E-mail
•
•
The E-mail address block appears. Press OK.
The Number block appears with an E-mail code already entered.
Press OK.
5
A message appears, confirming the E-mail or text message was sent.
Note: On some systems, you may need to enter the E-mail
address and another E-mail code. Check with your service
provider for details.
[ 97 ]
• FORWARD A MESSAGE
1
Press Options.
2
Scroll to Forward, then press OK.
The message text appears.
Edit the message if necessary, then press Options.
Send appears already highlighted.
Press OK.
3
4
5
The Number box appears.
Enter the recipient’s phone number, then press OK.
OR
•
Press Search to recall a stored name and phone number, then
press OK.
•
Press OK again to confirm.
• USE NUMBER
You can save or dial a phone number that is included in a message.
1
2
3
Press Options.
Scroll to Use number, then press OK.
If more than one number is shown, scroll to the one you want, then
press OK.
16
The phone displays the number on the screen. You can dial it or save it as
if you had entered it yourself.
• MESSAGE SETTINGS
Change common settings for all messages
1
Press Menu 2 7.
2
Scroll to Common, then press Select.
[ 98 ]
Messages++
3
Scroll to Delivery reports or Reply via same center, then press Select.
Delivery reports: Scroll to Yes or No, then press OK. Yes means that
the network tries to send delivery reports for the messages you send.
Reply via same center: The network tries to route the reply to this
text message through your own message center.
• MESSAGE STORAGE
The inbox and outbox share a given amount of memory in your SIM card.
When this memory is full and there is no more room to store messages,
the message indicator blinks. If you are sent a message when the memory
is full, the phone displays the message No space: message waiting.
You should delete one or more old messages to make room for the new
message. The network waits and resends the message at a later time.
Note: Depending on your SIM card, the inbox and outbox can
contain a total of up to 30 messages.
• PICTURE MESSAGES
Using Menu 2 4, you can send picture messages with your phone. There are
14 images included in your phone. All images can be replaced or deleted.
Note: Picture messaging must be supported by your service
provider and by the receiving phone.
Send picture messages
16
1
Press Menu 2 4.
2
When the picture list appears, scroll to the picture you want to send,
then press View.
The picture appears. To choose a different picture, press
, scroll to
another picture, then press View.
3
4
Press Options and scroll to Forward, and press Select.
Recall or enter the phone number to which you want to send the
picture message.
[ 99 ]
5
Press OK.
Send picture messages with text
1
Press Menu 2 4.
2
When the picture list appears, scroll to the picture you want to send,
then press View.
The picture appears. To choose a different picture, press
, scroll to
another picture, then press View.
3
4
Press Options.
When Edit text appears, press Select.
Use predictive text input or standard text input to write the message
(up to 121 characters) to go along with the picture (see “Writing
messages” on page 86 for more information).
5
After writing the message, press Options, then scroll to one of the
following:
•
•
•
Save picture lets you permanently assign the text to that picture.
Clear text lets you erase the entire text message.
Preview lets you see the picture and text message before sending
it. Press
or
as needed to see the entire message.
OR
Scroll to Send picture and press OK.
16
6
Enter the phone number to which you want to send the picture
message and press OK.
Sending picture message appears, followed by Picture message sent.
Note: The phone number chosen must be able to receive
picture messages.
[ 100 ]
Messages++
Receive picture messages
1
2
3
When your phone displays Picture message received, press View and
the message appears.
If the picture has a text message with it, scroll up or down to see the
entire message.
Press Save to keep the picture message, or press
and Exit to
delete it.
Other picture message options
Erase: Deletes the picture you select and any text saved with the picture.
Caution: The Erase function permanently deletes the picture
and text.
Use number: Automatically lets you save any phone number included in
the text of the picture message.
Details: Shows the phone number of the person who sent you that picture
message.
16
[ 101 ]
17 Your personal digital
assistant
• CALCULATOR
Warning: Do not switch on
the phone to use this function
when wireless phone use is
prohibited or when it may
cause interference or danger.
Your phone’s calculator adds, subtracts, multiplies, divides, and converts
between currencies.
Use the calculator
1
Press Menu 8.
2
Enter the first number in the calculation.
•
Press
to enter a decimal point and press Clear to erase any
mistakes.
•
•
•
•
To add, press
once (+ appears)
twice (- appears)
To subtract, press
To multiply, press
To divide, press
three times (∗ appears)
four times ( / appears)
17
3
4
Enter the second number, repeating steps as needed.
Press Options.
Equals is selected.
Press OK.
5
[ 102 ]
Your personal digital assistant
Convert currency
SET THE EXCHANGE RATE
1
2
3
Press Menu 8, then press Options.
Scroll to Exchange rate, then press OK.
Scroll to How many home units to a foreign unit (to enter the
number of domestic units to a foreign unit) or How many foreign
units to a home unit (to enter the number of foreign units to a
domestic unit).
4
5
6
Press OK.
Enter the exchange rate (press
to enter a decimal point).
Press OK.
CONVERT A CURRENCY AMOUNT
1
Press Menu 8, then press Options.
2
Scroll to In home curr. to convert to domestic units or In foreign curr.
to convert to foreign units.
3
4
5
Press OK.
Enter the numbers you want converted, then press Options.
Scroll to In home curr. or In foreign curr., then press OK.
• CALENDAR
Warning: Do not switch on the phone to use this function
when wireless phone use is prohibited or when it may cause
interference or danger.
17
The calendar keeps track of reminders, calls
you need to make, meetings, and birthdays.
It can even sound an alarm when it’s time for
you to make a call or go to a meeting.
[ 103 ]
View the calendar
•
Press Menu 9 to see the current day’s calendar screen.
If the time isn’t set, Set phone clock appearsfollowed by the Time screen.
Enter the time in hh:mm format or in 24-hour format.
Enter the date
1
Press Options, scroll to Set the date, and press Select.
2
Enter the current month and day in mm/dd/yyyy format, then
press OK.
(Example: Enter December 31, as 12/31/2000).
Date is set appears.
VIEW DAY NOTES
This option allows you to view, erase, edit, move, and send notes made for
the selected day. Use the scroll keys to scroll through notes. Options
available while viewing a note are Erase, Edit, Move (to another date),
Send note to send the note,
MAKE NOTE
With this option, you can choose from four note types: Reminder, Call,
Meeting, or Birthday. Your phone asks you for more information depending
on which one you choose.
1
2
3
4
5
Press Options, scroll to Make note, then press Select.
Scroll to the desired note type (for example, Reminder) and press OK.
Enter a subject for the reminder and press OK.
17
Enter the date for the reminder in mm/dd/yyyy format and press OK.
When Set alarm for the note? appears, choose Yes.
• Enter the date for the alarm, then press OK.
• Enter the time for the alarm, then press OK.
• Choose am or pm, and press OK.
[ 104 ]
Your personal digital assistant
Calendar note saved appears briefly, and then the current day’s
calendar screen appears.
OR
If you’d rather not set an alarm, press
.
• Calendar note saved appears briefly, and the calendar screen for
the day of the reminder appears.
When you set calendar notes for the displayed date, the appropriate
icon(s) appear in the lower right-hand corner:
Birthday reminder
Meeting reminder
Call reminder
Other reminder
ERASE NOTES
1
Scroll to Erase notes and press Select.
2
Scroll to Of chosen day, One by one, or All at once, then press OK.
Of chosen day: Displays each note for the current day so you can delete the
notes individually. Press Erase to delete the note, or press the scroll keys
to view other notes.
One by one: Displays notes in chronological order, with birthdays first, so
you can delete them individually. Press Erase to delete the note, or press
the scroll keys to view other notes.
All at once: Allows you to delete all calendar notes at once. The phone
asks you to confirm your decision before erasing the notes.
17
VIEW ALL NOTES
Lets you scroll through all stored notes. Birthday notes appear first in
chronological order, followed by other notes, also in chronological order.
GO TO DATE
This option takes you directly to the specified date instead of scrolling.
•
Enter a date in mm/dd/yyyy format, then press OK.
[ 105 ]
SET THE DATE
This option allows you to set the current date in your phone.
•
Enter the date in mm/dd/yyyy format, then press OK.
Work with calendar notes
ERASE A CALENDAR NOTE
1
While viewing a note, press Options.
When Erase appears highlighted, press OK.
A confirmation message appears.
Press OK to erase the note.
OR
2
3
Press
to return to the note.
EDIT A CALENDAR NOTE
1
While viewing a note, press Options.
2
Edit the note as needed, then press OK.
Your phone will prompt you to edit other information, depending on
the type of note you’re viewing.
MOVE A NOTE
1
2
3
To move (or reschedule) a note, open the note and press Options.
Scroll to Move and press OK.
Enter the new date for the note.
Your phone will prompt to edit other information, depending on the
type of note you’re viewing.
17
Send/receive calendar notes
SEND A CALENDAR NOTE
You can share your calendar notes with another phone
1
2
While viewing any calendar note, press Options.
Scroll to Send note, and press OK.
[ 106 ]
Your personal digital assistant
3
Recall from the phone book or enter the number to which you want
to send the calendar note and press OK.
Sending message appears briefly.
VIEW RECEIVED CALENDAR NOTES
When someone sends you a note, your phone displays Calendar note
received. You can save the note in your calendar and work with it in the
same way as any other note in your calendar, including setting an alarm.
1
When your phone displays Calendar note received, press Options.
Show appears highlighted.
2
3
Press OK.
Scroll through the note.
SAVE OR DISCARD RECEIVED CALENDAR NOTES
1
After viewing the calendar note, press Back.
Scroll to Save, then press OK.
OR
2
Scroll to Discard and press OK.
• ALARM CLOCK
Warning: Do not switch on the phone to use this function
when wireless phone use is prohibited or when it may cause
interference or danger.
The alarm clock feature is based on your
phone’s internal clock and sounds an alert
at a time you specify. It even works if you
switch the phone off!
17
Set the alarm clock
1
Press Menu 5 1.
Set alarm time appears.
Enter the alarm time in hh:mm format.
2
[ 107 ]
3
4
Press OK.
Select either am or pm and press OK.
Alarm on appears briefly.
Note: Step 4 is necessary only in am/pm format.
5
Press and hold
at the top of the screen to show the alarm is set.
to return to the start screen. The
icon appears
Manage the alarm
When the alarm sounds, you can shut it off or use the snooze feature.
PHONE ON
•
Press any key to stop the alarm.
The alarm is reset and, on the next day, will sound again at the time
you’ve set.
Tip: If you let the alarm sound for 1 minute without pressing
a key, it stops for 5 minutes, and then sounds again.
OR
•
Press Snooze.
The alarm stops and sounds again in 5 minutes.
To silence the alarm and keep snoozing, press Stop.
To shut off the alarm, press any key.
PHONE OFF
17
The phone switches itself on at alarm time, and then the alarm sounds.
If you press any key, the phone displays Activate phone for calls?.
Press Yes to keep it on or
to shut it off.
Warning: Do not switch on the phone to use this function
when wireless phone use is prohibited or when it may cause
interference or danger.
[ 108 ]
Your personal digital assistant
Turn off the alarm clock
1
2
Press Menu 5 1.
Scroll to Off and press OK.
• BUSINESS CARDS
Your phone can send or receive electronic business cards consisting of a
name and phone number. You can save received business cards to your
phone book.
Send a business card
1
2
3
Press Menu and then Select.
Scroll to Send entry and press Select.
Scroll to the entry in the phone book that you want to send and press
Send.
4
5
Enter or recall from the phone book the number to which you want
to send the entry and press OK. To send a business card through
Sending message appears.
View a received business card
1
When your phone displays Business card
received, press Options.
Show appears highlighted, along with
Save and Discard.
17
2
Press OK to read the information.
Save a viewed business card
1
After viewing the business card, press Back, scroll to Save, then
press OK.
2
3
At the Name: prompt, edit the name if you want to, then press OK.
At the Number: prompt, edit the number if you want to, then
press OK.
[ 109 ]
Delete a viewed business card
After viewing the business card, press Back, scroll to Discard, then
press OK.
View more than one business card
1
When your phone displays Business card received, press Options.
Show appears highlighted, along with Save and Discard.
2
3
Press OK to read the information in the first business card.
Press Back and then
.
The business card you last viewed is deleted and Show appears again
with Save and Discard.
Note: To save the business card, press Back and refer to "Save a
viewed business card."
4
Press Show to view the next business card.
17
[ 110 ]
Fun and games
18 Fun and games
• GAMES
Challenge yourself or a friend to the five fun games in your phone!
Warning: Do not switch on the phone to use this function when
wireless phone use is prohibited or when it may cause interference
or danger.
Snake II
Feed the snake with as many goodies as possible and watch it grow. Use
keys
,
,
, and
to turn the snake toward food. The longer
the snake’s tail grows, the higher your score. You can choose to have a
clear field, or select from five different mazes. If the snake runs into its
own tail or one of the walls, the game is over.
Space Impact
Use your weapons to survive alien attacks. When you defeat all the enemies,
you progress to the next level. Use
and
to move left and right. Key
or fires bonus weapons.
to move up and down,
or fires the main
and
weapons, and key
Bumper
Get your highest score by keeping the ball on the table using the flippers.
Press
keys
to launch the ball. Hold down the key to get more power. Use
and to control the flippers. Use keys and to
nudge the table - but not too much or the game will tilt!
18
Bantumi
Play against the phone, dropping beans into the pots. Press
or
to pick a pot and
to drop the beans. Finish in your big pot and get
another turn. Finish in your empty pot and get beans from the opponent's
pot. The one with most beans wins.
[ 111 ]
Pairs II
Uncover pictures to find pairs, but use as few tries as possible. In Arcade
mode, you must find all the pairs before the bomb explodes. Move the
cursor with keys
pictures.
,
,
, and
. Press
to reveal the
++
• DOWNLOAD RINGING TONES
You can download ringing tones to replace the 20 (empty) entries in your
list of ringing tones. For details about this network service, contact your
wireless service provider.
Notification of received ringing tone
When your phone receives a ringing tone, Ringing tone received appears.
Listen to received ringing tones
1
When your phone displays Ringing tone received, press Options.
Playback is selected.
2
Press OK.
The phone plays the ringing tone.
Save received ringing tones
1
2
3
After listening to the ringing tone, press Back.
Scroll to Save tone, then press OK.
Choose which ringing tone you want to replace (either an empty place
holder, or a previously downloaded tone), then press OK.
18
The tone is saved to your list of ringing tones.
Discard received ringing tones
If you don’t want to save the ringing tone, press Exit without saving it, or
scroll to Discard, then press OK.
[ 112 ]
Fun and games
• RINGING TONE COMPOSER
This function lets you make up your own, custom ringing tone.
Features
•
7-note scale with three octaves for each note.
•
Note and rest duration selectable from whole note to 32nd note and
whole rest to 32nd rest.
•
•
•
Tempo ranges from 40 beats per minute (BPM) to 225 BPM.
Each tone can be up to 50 notes long.
You can copy the tone to another phone.
Compose the tone
SELECT COMPOSER
•
Press Menu 10.
•
The composer screen appears.
The number in the upper right corner
indicates how many notes are available.
18
[ 113 ]
The notes in Composer begin with c and end with b.
ENTER NOTES FOR "MARY HAD A LITTLE LAMB."
•
•
Press
.
As you press each key, you hear
each note and the entries appear on
the screen:
NOTE DEFINITIONS:
Duration
The first number indicates how long the note
lasts. The smaller the number, the longer it
lasts.
1 - whole note
2 - half note
4 - quarter note
8 - eighth note
16 - sixteenth note
32 - thirty-second note
18
•
The next note entered keeps the same duration as the previous note.
Press 8 to make it shorter or 9 to make it longer.
•
Press
to erase one note, or press
repeatedly to erase several
notes.
[ 114 ]
Fun and games
Note
Notes range from c to b.
Octave
This indicates the pitch range of the note.
The higher the number, the higher the pitch
range.
Press
to select different
octaves
Octave 1
Octave 2
18
Octave 3
[ 115 ]
CLEAR SCREEN
Caution: This option erases the tone completely!
1
2
Press Options and scroll to Clear screen.
Press OK to erase the entire tone.
RESTS AND SHARPS
•
•
•
Press
Press
Press
to insert brief pauses between notes, known as rests.
to make the rest shorter, or
to make the note sharp.
to make the rest longer.
The note plays again at the higher pitch.
PLAY THE TONE
1
2
Press Options.
Play appears highlighted.
Press OK.
The new tone plays.
SET THE TEMPO
1
After entering notes in Composer, press Options and scroll to Tempo.
2
Press OK.
Tempo ranges from 40 BPM (slow) to 225 BPM (fast).
Scroll to the tempo you want and press Select.
Scroll to Play and press OK to hear the tone at the new tempo.
3
4
SAVE THE TONE
1
After entering notes in Composer and setting the tempo, press
Options and scroll to Save.
18
2
3
Press OK.
Enter a name for the tone and press OK.
The tone name now appears in the Ringing tone list.
[ 116 ]
Fun and games
SEND THE TONE
You can send the tone to another phone.
Tip: Before sending the tone to another phone, set the message
mode to "Messages sent as text." See “Set the message mode” on
page 86. Also, the phone to which you’re sending the tone must be
capable of receiving ringing tones. Check with your service provider
for more information.
1
2
3
Press Menu 10.
When the tone appears, press Options.
Scroll to Send and press OK.
The tone name appears.
Press OK.
4
5
Enter or recall from the phone book the number to which you want
to send the tone.
6
Press OK.
SELECT THE TONE
1
2
3
Press Menu 4, choose a profile, and press Select.
Scroll to customize and press OK.
Ringing tone is the first menu item.
Press Select.
The list of ring tones appears.
4
5
Scroll to the name of the tone you composed and press Select.
18
Press
.
Customize appears highlighted.
6
Scroll up to Select and press OK.
[ 117 ]
19 Reference information
• BATTERIES, CHARGERS, AND ACCESSORIES
This section provides information about the phone’s batteries, accessories,
and chargers. Be aware that the information in this section is subject to
change as the batteries, chargers, and accessories change.
This phone is intended for use when supplied with power from the PPH-1
car kit, an ACP-7U, an ACP-8U, or an LCH-9 charger. Other usage could
invalidate any approval given to this apparatus and might be dangerous.
Warning: When you purchase batteries, chargers, and accessories
for your phone, use only batteries, chargers, and accessories that
have received approval from the phone’s manufacturer. The use of
any other type of phone-related hardware may invalidate any approval or
warranty applying to the phone, and could also be dangerous. For
availability of approved batteries, chargers, and accessories, check with
your dealer.
Note: For information on how to charge and recharge your battery,
When the battery is charged the battery bar stops scrolling. Battery full
appears also, if the phone is on. Allow another 2 hours for a “trickle” or
“maintenance” charge.
When you are not using a charger, disconnect it from the power source.
Do not leave the battery connected to a charger for more than a week,
since overcharging could shorten its life span. If left unused, a fully-
charged battery will discharge itself over time.
Temperature extremes can affect the ability of your battery to charge.
Therefore, allow it to cool down or warm up before trying to charge it.
19
[ 118 ]
Reference information
When the battery is running out of power and your phone only has a few
minutes of talk time remaining, a warning tone sounds and the Battery
low message appears briefly. When no more talk time is left, a warning
tone is sounded and the phone switches itself off.
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object, like a coin, a clip, or a pen causes a direct
connection of the + and - terminals of the battery, which are metal strips
on top of the battery.
An example of short-circuiting could occur if you carry a spare battery in
your pocket or purse, where the battery could come into contact with
objects such as a coin. Short-circuiting could damage either the battery
or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in
either summer or winter conditions, will reduce the capacity and lifetime
of the battery. Always try to keep the battery between 15°C and 25°C
(59°F and 77°F).
A phone with a hot or cold battery might not work temporarily, even if the
battery is fully charged. The performance of batteries is particularly limited
in temperatures below 0°C (32°F).
The following list provides guidelines that you can follow:
•
When the operating time (talk time and standby time) is noticeably
shorter than normal, buy a new battery.
•
•
•
Use the battery only for its intended purpose.
Never use any charger or battery that is damaged and/or worn out.
Batteries must be recycled or disposed of properly. Do not dispose of
batteries by putting them in fire!
19
•
When you disconnect the power cord of any accessory, grasp and pull
the plug, not the cord.
[ 119 ]
• IMPORTANT SAFETY INFORMATION
This section provides additional safety information. A brief overview of
Traffic safety
Do not use a handheld telephone while driving a vehicle. Always park the
vehicle before using the phone.
After completing your phone conversation, always secure the phone back
into its holder; do not place the phone on the passenger seat or place it
where it can break loose in a collision or during a sudden stop.
Caution: The use of an alert device to operate a vehicle’s lights or
horn on public roads is not permitted.
Remember: Safety—Your most important call.
Operating environment
Remember to follow any special regulations that are in force in any area,
and always switch off your phone wherever it is forbidden to use it.
Otherwise, the use of your phone could cause interference or danger.
When connecting the phone or any accessory to another device, read the
associated user guide first and obtain detailed safety instructions.
Note: Do not connect incompatible products.
As with other mobile radio transmitting equipment, you are advised that,
for the satisfactory operation of the equipment and for the safety of
personnel, it is recommended that the phone should only be used in the
normal operating position. This position is when the phone is held to your
ear with the antenna pointing over your shoulder.
Electronic devices
19
Most modern electronic equipment is shielded from radio frequency (RF)
signals. However, certain electronic equipment might not be shielded
against the RF signals from your wireless phone. The following four
subsections provide more information about this topic.
[ 120 ]
Reference information
PACEMAKERS
Pacemaker manufacturers recommend that a minimum separation of 6
inches (20 cm) should be maintained between a handheld wireless phone
and a pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with the independent research by
and recommendations of Wireless Technology Research. Persons with
pacemakers:
•
Should always keep the phone more than 6 inches (20 cm) from their
pacemakers when the phone is switched on.
•
•
Should not carry the phone in a breast pocket.
Should use the ear opposite the pacemaker to minimize the potential
for interference.
Caution: If you have any reason to suspect that interference is
taking place, switch off your phone immediately.
HEARING AIDS
Some digital wireless phones could interfere with some hearing aids. In
the event of such interference, you might want to consult your service
provider.
OTHER MEDICAL DEVICES
Operation of any radio transmitting equipment, including cellular phones,
could interfere with the functionality of inadequately protected medical
devices. Consult a physician or the manufacturer of the medical device to
determine if they are adequately shielded from external RF energy. Also
contact these authorities if you have any questions.
Switchoff yourphone inhealthcare facilities or where anyposted regulations
instruct you to do so. Hospitals or health care facilities could be using
equipment that is sensitive to external RF energy.
19
[ 121 ]
VEHICLES
RF signals could improperly affect installed or inadequately shielded
electronic systems in motor vehicles. These could include electronic fuel
injection systems, electronic anti-skid (anti-lock) braking systems, electronic
speed control systems, or air bag systems.
Check with the manufacturer or its representative regarding your vehicle.
You should also consult the manufacturer of any equipment that has been
added to your vehicle.
POSTED FACILITIES
Switch your phone off in any facility where posted notices so require.
Potentially explosive atmospheres
Switch off your phone if you are in any area that has a potentially
explosive atmosphere, and obey all signs and instructions. Sparks in such
areas could cause an explosion or fire, resulting in bodily injury or even
death.
You are advised to switch off the phone while at a refueling point
(service station). And, you are reminded of the need to observe restrictions
regarding the use of radio equipment in fuel depots (fuel storage and
distribution areas), chemical plants, or where blasting operations are in
progress.
Areas with a potentially explosive atmosphere are often—but not always—
clearly marked. These areas include the following: below deck on boats;
chemical transfer or storage facilities; vehicles using liquefied petroleum
gas (such as propane or butane); areas where the air contains chemicals
or particles, such as grain, dust, or metal powders; and any other area
where you would normally be advised to turn off your vehicle engine.
Vehicles
19
Only qualified personnel should service the phone or install the phone in
a vehicle. Faulty installation or service could be dangerous and might
invalidate any warranty that could apply to the unit.
[ 122 ]
Reference information
Regularly check that all wireless phone equipment in your vehicle is
mounted and operating properly.
Do not store or carry flammable liquids, gases, or explosive materials in
the same compartment as the phone, its parts, or its accessories.
For vehicles equipped with an air bag, remember that an air bag inflates
with great force. Do not place objects, including both the installed or the
portable wireless equipment, in the area over the air bag or in the air bag
deployment area. If the in-vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
Switch off your phone before boarding an aircraft. The use of wireless
telephones in an aircraft may be dangerous to the operation of the
aircraft, may disrupt the wireless telephone network, and may be illegal.
Failure to observe these instructions could lead to the suspension or the
denial of telephone services to the offender, or it could result in legal
action, or both scenarios could apply.
• EMERGENCY CALLS
IMPORTANT!
This phone, like any wireless phone, operates using radio signals,
wireless and landline networks, and user-programmed functions.
Because of this, connections in all conditions cannot be guaranteed.
Therefore, you should never rely solely on any wireless phone for
essential communications (for example, medical emergencies).
Remember, to make or receive any calls, the phone must be switched on
and be used in a service area that has adequate signal strength. Emergency
calls might not be possible on all wireless phone networks or when certain
network services and/or phone features are in use. Check with local
service providers.
19
[ 123 ]
Always make sure that your phone is properly charged before attempting
any emergency calls. If you allow your battery to become empty, you will
be unable to receive or make calls, including emergency calls. You must
then wait a few minutes after the charging begins to place any emergency
calls.
Make an Emergency Call
1
If the phone is not on, switch it on.
Some networks may require that a valid SIM card is properly inserted
in the phone.
2
3
Enter the emergency number for your present location (for example,
911 or any other official emergency number. Emergency numbers vary
by location).
Press Call.
If certain features are in use (Fixed dialing, restrict calls, and so on), you
might first need to turn those features off before you can make an emergency
call. Consult this document and your local cellular service provider.
When making an emergency call, remember to give all of the necessary
information as accurately as possible. Remember that your wireless phone
might be the only means of communication at the scene of an accident—
do not terminate the call until given permission to do so.
19
[ 124 ]
Reference information
CERTIFICATION INFORMATION (SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of
the U.S. Government. These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR
limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using
standard operating positions accepted by the FCC with the phone
transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power
level, the actual SAR level of the phone while operating can be well below
the maximum value. This is because the phone is designed to operate at
multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station antenna,
the lower the power output.
Before a phone model is available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the limit established by
the government-adopted requirement for safe exposure. The tests are
performed in positions and locations (for example, at the ear and worn on
the body) as required by the FCC for each model. The highest SAR value
for this model phone as reported to the FCC when tested for use at the
ear is .86 W/kg, and when worn on the body, as described in this user
guide, is 0.68 W/kg. (Body-worn measurements differ among phone
models, depending upon available accessories and FCC requirements).
19
[ 125 ]
While there may be differences between the SAR levels of various phones
and at various positions, they all meet the government requirement.
The FCC has granted an Equipment Authorization for this model phone
with all reported SAR levels evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this model phone is on file with
the FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID GMLNPB-1BB.
For body worn operation, this phone has been tested and meets the FCC
RF exposure guidelines when used with the Nokia accessories supplied or
designated for this product. Use of other accessories may not ensure
compliance with FCC RF exposure guidelines.
________________________________________________________
*In the United States and Canada, the SAR limit for mobile phones used
by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of
tissue. The standard incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in
measurements. SAR values may vary depending on national reporting
requirements and the network band. For SAR information in other regions
please look under product information at www.nokia.com.
• ACCESSORIES
If you want to enhance your phone’s functionality, a range of accessories
is available for you. You can select any of these items to help accommodate
your specific communication needs. For availability of these and other
accessories, contact your service provider.
A FEW PRACTICAL RULES FOR ACCESSORY OPERATION
•
Keep all accessories out of reach of small children.
19
•
When you disconnect the power cord of any accessory, grasp and pull
the plug, not the cord.
•
Check regularly that any vehicle-installed accessories are mounted
and are operating properly.
[ 126 ]
Reference information
•
•
Installation of any complex car accessories must be made by qualified
personnel only.
Use only batteries, chargers, and accessories that have been approved
by the phone manufacturer. The use of any other types could invalidate
any approval or warranty applying to the phone, and could be
dangerous. Refer to “Batteries, chargers, and accessories” on
• XPRESS-ON™ COVERS
Your phone’s Xpress-on covers are available in several fashion colors.
Extra covers may be purchased from your authorized Nokia dealer.
•
•
Always store the phone with the covers attached.
Before changing the covers, always switch off the phone and
disconnect the phone from the charger or any other device.
REMOVE THE BACK COVER
1&2 Press the back cover release
button.and slide the cover forward.
3
Lift the cover off the phone.
19
[ 127 ]
REMOVE THE FRONT COVER
1
Hold the phone as shown
here.
2
Gently pull the cover until it
pops open.
REMOVE THE KEYPAD
1
Lift the keypad from the
back of the old cover.
2
Place the keypad into the
back of the new cover.
REPLACE THE FRONT COVER
1
Align the top of the phone
with the top of the front cover.
2
Push the phone toward the cover
until it locks into place.
19
[ 128 ]
Reference information
REPLACE THE BACK COVER
1
Insert the two catches of the back
cover in the corresponding slots in
the phone.
2
Slide the cover towards the bottom
of the phone until it locks into place.
• BATTERIES
This section provides information about the phone’s batteries. Be aware
that the information in this section is subject to change.
Caution: Dispose of used batteries in accordance with any local
regulations.
The tables shown in this section provide information about battery options
that are available for your phone, charging times with the Rapid Travel
Charger (ACP-8U), the Standard Travel Charger (ACP-7U), talk times, and
standby times. Consult your service provider for more information.
Note: The charging times listed below are approximate.
19
[ 129 ]
CHARGING TIMES
Battery option
ACP-7U Charger ACP-8U Charger
BMC-2 NiMH Battery 640 mAh
BMC-3 NiMH Battery 900 mAh
BLC-2 Li-Ion Battery 850 mAh
2 hrs 45 min
4 hrs
1 hr 30 min
2 hrs
3 hrs 15 min
2 hrs 15 min
Tip: The times displayed above allow your battery to obtain most
of its capacity. When this happens, the battery scroll bars on your
phone’s screen stop scrolling. If you want to obtain full battery
capacity, allow another 2 hours for a “trickle” or “maintenance”
charge.
STANDBY AND TALK TIMES
Note: Battery talk and standby times are estimates only and
depend on signal strength, network conditions, features used,
battery age and condition (including the effect of charging habits),
temperatures to which battery is exposed, use in digital mode, and
many other factors. Please note that the amount of time a phone
is used for calls will affect its standby time. Likewise, the amount
of time that the phone is turned on and in standby mode will affect
its talk time.
Battery option
Digital talk time Standby time
BMC-2 NiMH Battery 640 mAh up to 2 hrs 40 min up to 5.5 days
BMC-3 NiMH Battery 900 mAh up to 3 hrs 45 min up to 7.5 days
BLC-2 Li-Ion Battery 850 mAh up to 3 hrs 45 min up to 7.5 days
19
[ 130 ]
Reference information
• CHARGERS AND OTHER ACCESSORIES
This section provides information about the phone’s chargers and
accessories. Be aware that the information in this section is subject
to change as the chargers and accessories change.
The chargers and accessories that are described in this section are available
for your phone. Contact your dealer for details. Also, refer to the accessories
brochure that was included in your sales package for the entire line of
Nokia Original Accessories.
Note: When a charger is not in use, disconnect it from the power
source. Do not leave the battery connected to a charger for longer
than a week, since overcharging the battery could shorten its life
span. If left unused, a fully charged battery will discharge itself
over time.
STANDARD TRAVEL CHARGER (ACP-7U)
This is a lightweight (187g) and durable AC charger.
To use the Standard Travel Charger, plug it into a wall
outlet and connect the lead from the charger to the
base of your phone.
RAPID TRAVEL CHARGER (ACP-8U)
This is a lightweight (100g) and durable AC charger.
Calls can be made during charging, even with a fully
discharged battery.
To use the Rapid Travel Charger (ACP-8U), plug it into a
standard 120V or 220V AC wall outlet, and connect the
lead from the charger to the base of your phone.
The charger can also be used together with the optional
Desktop Charging Stand. Approximate charging times
19
[ 131 ]
TRAVEL CHARGER (ACP-12)
This charger is especially suitable for active travelers because it works
with multiple voltages. Plug it into a standard 120V or 220V AC wall
outlet, and connect the lead from the charger to the base of your phone.
MOBILE CHARGER (LCH-9)
You can charge your phone’s battery from
your vehicle battery by using the Mobile
Charger. You can also use this lightweight
charger with the Desktop Charging Stand.
Calls are possible during charging. A green
light indicates that the charger is ready for
charging (when not charging) or finished
charging (if it has been charging). The battery charging times are the same
as those for the Rapid Travel Charger (ACP-8U).
The input voltage range is from 11 to 32V DC, negative grounding. Avoid
prolonged charging with the Rapid Cigarette Lighter Charger when the
car engine is not running; this could cause your car battery to drain. Note
also that, in some cars, the cigarette lighter plug is not provided with
electricity if the ignition is not switched on.
DESKTOP STAND (DCV-10)
This charging stand allows you to charge your
phone’s battery in an upright, obtainable
position on your desk.
Used together with the Standard Travel Charger
(ACP-7U), the Travel Charger (ACP-12), or the
Rapid Travel Charger (ACP-8U), the Desktop Charging Stand is an
economical choice when you need your phone close at hand, always ready
for calls.
19
[ 132 ]
Reference information
SPARE BATTERY CHARGER (DDC-1)
Lightweight and stylish. this charger provides
a convenient way to charge your spare
battery. Compatible with Rapid Travel Charger
(ACP-8U) or Standard Battery Charger
(ACP-7U).
MOBILE HOLDER (MBC-6)
Holds phone securely in place while driving or
during charging. Can be used with Rapid Mobile
Charger (LCH-9)
HEADSET KIT (HDE-2, HDC-5)
This headset provides handsfree operation.
It connects directly to phone requiring no
additional adapter.
EXPRESS CAR KIT (CARK-125)
This compact charger provides full handsfree
use by simply plugging into the cigarette lighter.
The mobile holder holds the phone securely.
LEATHER CARRY SLEEVE (CSL-12)
A luxurious leather sleeve with standard
belt clip.
19
MICROFIBER CARRY SLEEVE
A colorful, form-fitting carry sleeve with standard belt clip.
Purple - CSH-7 Gray - CSM-2 Blue - CSM-3
[ 133 ]
Troubleshooting
20 Troubleshooting
This section provides a table that lists some of the most commonly
encountered problems and provides possible solutions.
Problem
Possible cause
Possible solution
My phone isn’t
charging.
The charger and the phone Securely connect the
are not properly connected. charger to the phone.
The charger is not properly Make surethatthecharger
plugged in.
is plugged in correctly.
My phone isn’t
making/answering
calls.
The battery is not charged. Charge the battery.
The signal strength is poor. If you are indoors, move
toward a window.
The phone line has changed. Press and hold
to
select the correct line,
1 or 2.
I can’t listen to my You don’t have voice mail Call your wireless service
voice messages. service. provider.
You have not set up your Call your wireless service
voice mailbox with your
service provider.
provider.
You have not saved your
Refer to “Voice mail++”
phone.
The voice mail number you Call your wireless service
have saved is incorrect.
provider.
You have forgotten your
password or are entering it provider.
incorrectly.
Call your wireless service
20
[ 135 ]
21 Frequently asked questions
(FAQ)
This section lists and answers the questions that you most frequently ask.
Where necessary, the answers refer you to the appropriate section within
this guide.
Note: Some of the answers tell you to use menu shortcuts.
For a complete listing of these shortcuts, refer to “List of menu
Q. How do I lock my phone?
A. Press Menu 5 6 1, press Select, enter your PIN code, and press OK.
Scroll to On and press OK.
Q. How do I unlock my phone?
A. Press Menu 5 6 1, press Select, enter your PIN code, and press OK.
Scroll to Off and press OK.
Q. What is my lock code?
A. The lock code enables you to lock your phone, thus preventing someone
else from using it. The default lock code is 1234 (depending on your
service provider). However, you should change this code immediately.
Q. What is my security code?
A. The default security code is 12345. However, it is suggested that you
change this code immediately. Certain features can be used only after
the correct security code has been successfully entered.
21
[ 136 ]
Frequently asked questions (FAQ)
Q. How do I lock the keypad?
A. To lock the keypad:
•
Press Menu
.
Q. How do I unlock the keypad?
A. To unlock the keypad:
•
Press Unlock and
.
Q. How do I make the ringing louder?
Q. How do I change the ringing tone?
Q. How do I store my voice mailbox number?
A. Press Menu 2 10 2. Enter your voice mailbox number, then press OK.
This number can be up to 32 digits long.
This voice mailbox number is valid unless your phone number changes.
If your phone number changes, you will have to save a new voice
mailbox number. Refer to “Save the voice mailbox number” on
page 40 for details.
Q. How do I call my voice mailbox number (retrieve voice messages)?
When your phone alerts you to new voice messages, press Listen and
follow the prompts. If you’d rather listen later, press
.
To listen to your voice messages at a later time, perform one of the
following actions:
•
If you’ve saved your voice mailbox number in your phone, press
21
and hold
to call your voice mailbox.
[ 137 ]
•
Call your voice mailbox number as you would any other telephone
number, then follow the directions provided.
See “Voice mail++” on page 39. for details.
Q. How do I find my phone’s model number?
A. Turn off your phone, then remove the battery from the back of the
phone. Read the sticker that is inside and you will find, after the word
Model, your phone’s model number.
Q. How do I redial the last-dialed number?
A. Press
once.
See “Redial the last-dialed number” on page 20 for details.
Q. How do I assign a key to 1-touch dialing?
A. Press Menu, then Select, scroll to 1-touch dialing, and press Select.
Scroll to the key number you want to assign a 1-touch dial number
and press Assign.
Note: If you have numbers saved in SIM memory, the first nine
numbers are automatically stored in keys 2 through 9 as
1-touch dial numbers.
Scroll to the phone book entry that you want to assign to this key and
Q. How do I find out how many memory locations the phone has?
A. Press Menu and then Select. Scroll to Options. Press Select.
Scroll to Memory status and press Select again. A message appears
stating the amount of memory locations free and in use.
Q. How do I find my phone’s IMEI number?
A. Turn your phone off, open the rear sliding cover, then remove the
battery. Your phone’s IMEI number is printed on the sticker inside the
21
battery cover, under the first bar code. Or press
06
.
[ 138 ]
Frequently asked questions (FAQ)
Q. How can I change the contrast of my phone’s display?
A. The contrast of your phone’s display is fixed and cannot be changed.
Q. Why doesn’t the battery last as long as the user guide says it will?
A. A battery’s life greatly depends on how the battery is charged. Be sure
to charge the battery for 24 hours so it will reach a 100% charge.
• CARE AND MAINTENANCE
Your phone is a product of superior design and craftsmanship and should
be treated with care. The suggestions below will help you to fulfill any
warranty obligations and allow you to enjoy this product for many years.
When using your phone, battery, charger, or any accessory:
•
•
•
•
Keep it and all its parts and accessories out of the reach of small
children.
Keep it dry. Precipitation, humidity, and liquids contain minerals that
will corrode electronic circuits.
Do not use or store it in dusty, dirty areas as its moving parts can be
damaged.
Do not store it in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain
plastics.
•
Do not store it in cold areas. When the phone warms up to its normal
operating temperature, moisture can form inside the phone, which
could damage the phone's electronic circuit boards.
•
•
•
Do not attempt to open it. Non-expert handling of the device could
damage it.
Do not drop, knock or shake it. Rough handling can break internal
circuit boards.
Do not use harsh chemicals, cleaning solvents, or strong detergents
to clean it. Wipe it with a soft cloth that has been slightly dampened
in a mild soap-and-water solution.
21
[ 139 ]
•
Do not paint it. Paint can clog the device’s moving parts and prevent
proper operation.
If the phone, battery, charger, or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
21
[ 140 ]
Nokia One-Year Limited Warranty
22 Nokia One-Year Limited
Warranty
Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free
from defects in material and workmanship that result in Product failure
during normal usage, according to the following terms and conditions:
1
The limited warranty for the Product extends for ONE (1) year beginning
on the date of the purchase of the Product. This one year period is
extended by each whole day that the Product is out of your possession
for repair under this warranty.
2
The limited warranty extends only to the original purchaser (“Consumer”)
of the Product and is not assignable or transferable to any subsequent
purchaser/end-user.
3
4
The limited warranty extends only to Consumers who purchase the
Product in the United States of America.
During the limited warranty period, Nokia will repair, or replace, at
Nokia’s sole option, any defective parts, or any parts that will not
properly operate for their intended use with new or refurbished
replacement items if such repair or replacement is needed because
of product malfunction or failure during normal usage. No charge
will be made to the Consumer for any such parts. Nokia will also
pay for the labor charges incurred by Nokia in repairing or replacing
the defective parts. The limited warranty does not cover defects in
appearance, cosmetic, decorative or structural items, including
framing, and any non-operative parts. Nokia’s limit of liability under
the limited warranty shall be the actual cash value of the Product at
the time the Consumer returns the Product for repair, determined by
the price paid by the Consumer for the Product less a reasonable
amount for usage. Nokia shall not be liable for any other losses or
damages. These remedies are the Consumer’s exclusive remedies for
breach of warranty.
22
[ 141 ]
5
6
Upon request from Nokia, the Consumer must prove the date of the
original purchase of the Product by a dated bill of sale or dated
itemized receipt.
The Consumer shall bear the cost of shipping the Product to Nokia in
Melbourne, Florida. Nokia shall bear the cost of shipping the Product
back to the Consumer after the completion of service under this
limited warranty.
7
The Consumer shall have no coverage or benefits under this limited
warranty if any of the following conditions are applicable:
a) The Product has been subjected to abnormal use, abnormal
conditions, improper storage, exposure to moisture or dampness,
unauthorized modifications, unauthorized connections,
unauthorized repair, misuse, neglect, abuse, accident, alteration,
improper installation, or other acts which are not the fault of
Nokia, including damage caused by shipping.
b) The Product has been damaged from external causes such as
collision with an object, or from fire, flooding, sand, dirt,
windstorm, lightning, earthquake or damage from exposure to
weather conditions, an Act of God, or battery leakage, theft,
blown fuse, or improper use of any electrical source, damage
caused by computer or internet viruses, bugs, worms, Trojan
Horses, cancelbots or damage caused by the connection to other
products not recommended for interconnection by Nokia.
c) Nokia was not advised in writing by the Consumer of the alleged
defect or malfunction of the Product within fourteen (14) days
after the expiration of the applicable limited warranty period.
d) The Product serial number plate or the accessory data code has
been removed, defaced or altered.
e) The defect or damage was caused by the defective function of the
cellular system or by inadequate signal reception by the external
antenna, or viruses or other software problems introduced into
the Product.
22
[ 142 ]
Nokia One-Year Limited Warranty
8
Nokia does not warrant uninterrupted or error-free operation of the
Product. If a problem develops during the limited warranty period, the
Consumer shall take the following step-by-step procedure:
a) The Consumer shall return the Product to the place of purchase
for repair or replacement processing.
b) If “a” is not convenient because of distance (more than 50 miles)
or for other good cause, the Consumer shall ship the Product
prepaid and insured to:
Nokia Inc., Attn: Repair Department
795 West Nasa Blvd.
Melbourne, FL 32901
c) The Consumer shall include a return address, daytime phone
number and/or fax number, complete description of the problem,
proof of purchase and service agreement (if applicable). Expenses
related to removing the Product from an installation are not
covered under this limited warranty.
d) The Consumer will be billed for any parts or labor charges not
covered by this limited warranty. The Consumer will be responsible
for any expenses related to reinstallation of the Product.
e) Nokia will repair the Product under the limited warranty within
30 days after receipt of the Product. If Nokia cannot perform
repairs covered under this limited warranty within 30 days, or
after a reasonable number of attempts to repair the same defect,
Nokia at its option, will provide a replacement Product or refund
the purchase price of the Product less a reasonable amount for
usage. In some states the Consumer may have the right to a
loaner if the repair of the Product takes more than ten (10) days.
Please contact the Customer Service Center at Nokia at the
telephone number listed at the end of this warranty if you need
a loaner and the repair of the Product has taken or is estimated
to take more than ten (10) days.
22
[ 143 ]
f) If the Product is returned during the limited warranty period, but
the problem with the Product is not covered under the terms and
conditions of this limited warranty, the Consumer will be notified
and given an estimate of the charges the Consumer must pay to
have the Product repaired, with all shipping charges billed to the
Consumer. If the estimate is refused, the Product will be returned
freight collect. If the Product is returned after the expiration of
the limited warranty period, Nokia’s normal service policies shall
apply and the Consumer will be responsible for all shipping charges.
9
You (the Consumer) understand that the product may consist of
refurbished equipment that contains used components, some of
which have been reprocessed. The used components comply with
Product performance and reliability specifications.
10 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A
PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION
OF THE FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE
FOREGOING LIMITED WARRANTY IS THE CONSUMER’S SOLE AND
EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR SPECIAL,
INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, INCLUDING
BUT NOT LIMITED TO LOSS OF ANTICIPATED BENEFITS OR PROFITS,
LOSS OF SAVINGS OR REVENUE, LOSS OF DATA, PUNITIVE DAMAGES,
LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT,
COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT OR
FACILITIES, DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES,
INCLUDING CUSTOMERS, AND INJURY TO PROPERTY, RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM
BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE,
STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF
NOKIA KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL
NOT BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE
LIMITED WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE
PRODUCT IS BEING REPAIRED.
22
[ 144 ]
Nokia One-Year Limited Warranty
11 Some states do not allow limitation of how long an implied warranty
lasts, so the one year warranty limitation may not apply to you (the
Consumer). Some states do not allow the exclusion or limitation of
incidental and consequential damages, so certain of the above
limitations or exclusions may not apply to you (the Consumer). This
limited warranty gives the Consumer specific legal rights and the
Consumer may also have other rights which vary from state to state.
12 Nokia neither assumes nor authorizes any authorized service center
or any other person or entity to assume for it any other obligation or
liability beyond that which is expressly provided for in this limited
warranty including the provider or seller of any extended warranty or
service agreement.
13 This is the entire warranty between the Nokia and the Consumer, and
supersedes all prior and contemporaneous agreements or understandings,
oral or written, relating to the Product, and no representation,
promise or condition not contained herein shall modify these terms.
14 This limited warranty allocates the risk of failure of the Product
between the Consumer and Nokia. The allocation is recognized by
the Consumer and is reflected in the purchase price.
15 Any action or lawsuit for breach of warranty must be commenced
within eighteen (18) months following purchase of the Product.
16 Questions concerning this limited warranty may be directed to:
Nokia Inc.
Attn: Customer Service
7725 Woodland Center Blvd., Ste. 150
Tampa, FL 33614
Telephone: 1-888-NOKIA-2U (1-888-665-4228)
Facsimile: (813) 287-6612
TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6542)
17 The limited warranty period for Nokia supplied attachments and
accessories is specifically defined within their own warranty cards
and packaging.
Nokia is a registered trademark of Nokia Corporation.
22
[ 145 ]
Safety is the most important call you will ever make.
A Guide to Safe and Responsible Wireless Phone Use
Tens of millions of people in the u.s. today take advantage of the unique combination
of convenience, safety and value delivered by the wireless telephone. Quite simply, the
wireless phone gives people the powerful ability to communicate by voice--almost
anywhere, anytime--with the boss, with a client, with the kids, with emergency
personnel or even with the police. each year, americans make billions of calls from their
wireless phones, and the numbers are rapidly growing.
But an important responsibility accompanies those benefits, one that every wireless
phone user must uphold. When driving a car, driving is your first responsibility. A
wireless phone can be an invaluable tool, but good judgment must be exercised at all
times while driving a motor vehicle--whether on the phone or not.
The basic lessons are ones we all learned as teenagers. Driving requires alertness,
caution and courtesy. It requires a heavy dose of basic common sense---keep your head
up, keep your eyes on the road, check your mirrors frequently and watch out for other
drivers. It requires obeying all traffic signs and signals and staying within the speed
limit. It means using seatbelts and requiring other passengers to do the same.
But with wireless phone use, driving safely means a little more. This brochure is a call
to wireless phone users everywhere to make safety their first priority when behind the
wheel of a car. Wireless telecommunications is keeping us in touch, simplifying our
lives, protecting us in emergencies and providing opportunities to help others in need.
When it comes to the use of wireless phones, safety is your most important call.
Wireless Phone "Safety Tips"
Below are safety tips to follow while driving and using a wireless phone which should
be easy to remember.
1 Get to know your wireless phone and its features such as speed dial and redial.
Carefully read your instruction manual and learn to take advantage of valuable
features most phones offer, including automatic redial and memory. Also, work to
memorize the phone keypad so you can use the speed dial function without taking
your attention off the road.
2 When available, use a hands free device. A number of hands free wireless phone
accessories are readily available today. Whether you choose an installed mounted
device for your wireless phone or a speaker phone accessory, take advantage of these
devices if available to you.
3 Position your wireless phone within easy reach. Make sure you place your wireless
phone within easy reach and where you can grab it without removing your eyes from
the road. If you get an incoming call at an inconvenient time, if possible, let your
voice mail answer it for you.
4 Suspend conversations during hazardous driving conditions or situations. Let the
person you are speaking with know you are driving; if necessary, suspend the call in
heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be
hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay
attention to the road.
[ 147 ]
5 Do not take notes or look up phone numbers while driving. If you are reading an
address book or business card, or writing a "to do" list while driving a car, you are not
watching where you are going. It’s common sense. Don’t get caught in a dangerous
situation because you are reading or writing and not paying attention to the road or
nearby vehicles.
6 Dial sensibly and assess the traffic; if possible, place calls when you are not moving
or before pulling into traffic. Try to plan your calls before you begin your trip or
attempt to coincide your calls with times you may be stopped at a stop sign, red light
or otherwise stationary. But if you need to dial while driving, follow this simple tip--
dial only a few numbers, check the road and your mirrors, then continue.
7 Do not engage in stressful or emotional conversations that may be distracting.
Stressful or emotional conversations and driving do not mix--they are distracting and
even dangerous when you are behind the wheel of a car. Make people you are talking
with aware you are driving and if necessary, suspend conversations which have the
potential to divert your attention from the road.
8 Use your wireless phone to call for help. Your wireless phone is one of the greatest
tools you can own to protect yourself and your family in dangerous situations--with
your phone at your side, help is only three numbers away. Dial 9-1-1 or other local
emergency number in the case of fire, traffic accident, road hazard or medical
emergency. Remember, it is a free call on your wireless phone!
9 Use your wireless phone to help others in emergencies. Your wireless phone provides
you a perfect opportunity to be a "Good Samaritan" in your community. If you see an
auto accident, crime in progress or other serious emergency where lives are in danger,
call 9-1-1 or other local emergency number, as you would want others to do for you.
10Call roadside assistance or a special wireless non-emergency assistance number
when necessary. Certain situations you encounter while driving may require
attention, but are not urgent enough to merit a call for emergency services. But you
still can use your wireless phone to lend a hand. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal, a minor traffic accident where no
one appears injured or a vehicle you know to be stolen, call roadside assistance or
other special non-emergency wireless number.
Careless, distracted individuals and people driving irresponsibly represent a hazard to
everyone on the road. Since 1984, the Cellular Telecommunications Industry
Association and the wireless industry have conducted educational outreach to inform
wireless phone users of their responsibilities as safe drivers and good citizens. As we
approach a new century, more and more of us will take advantage of the benefits of
wireless telephones. And, as we take to the roads, we all have a responsibility to drive
safely.
The wireless industry reminds you to use your phone safely when driving.
For more information, please call 1-888-901-SAFE.
For updates: http://www.wow-com.com/consumer/issues/driving/articles.cfm?ID=85
[ 148 ]
Consumer Update on Wireless Phones
U.S. Food and Drug Administration
1. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are associated
with using wireless phones. There is no proof, however, that wireless phones are
absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the
microwave range while being used. They also emit very low levels of RF when in the
stand-by mode. Whereas high levels of RF can produce health effects (by heating
tissue), exposure to low level RF that does not produce heating effects causes no known
adverse health effects. Many studies of low level RF exposures have not found any
biological effects. Some studies have suggested that some biological effects may occur,
but such findings have not been confirmed by additional research. In some cases, other
researchers have had difficulty in reproducing those studies, or in determining the
reasons for inconsistent results.
2. What is FDA's role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-emitting consumer products
such as wireless phones before they can be sold, as it does with new drugs or medical
devices. However, the agency has authority to take action if wireless phones are shown
to emit radiofrequency energy (RF) at a level that is hazardous to the user. In such a
case, FDA could require the manufacturers of wireless phones to notify users of the
health hazard and to repair, replace or recall the phones so that the hazard no longer
exists.
Although the existing scientific data do not justify FDA regulatory actions, FDA has
urged the wireless phone industry to take a number of steps, including the following:
•
•
•
Support needed research into possible biological effects of RF of the type emitted
by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to the user that
is not necessary for device function; and
Cooperate in providing users of wireless phones with the best possible information
on possible effects of wireless phone use on human health.
FDA belongs to an interagency working group of the federal agencies that have
responsibility for different aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this working group:
•
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group
activities, as well.
[ 150 ]
FDA shares regulatory responsibilities for wireless phones with the Federal
Communications Commission (FCC). All phones that are sold in the United States must
comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks rely upon. While
these base stations operate at higher power than do the wireless phones themselves,
the RF exposures that people get from these base stations are typically thousands of
times lower than those they can get from wireless phones. Base stations are thus not
the subject of the safety questions discussed in this document.
3. What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with built-in
antennas, often called cell mobile or PCS phones. These types of wireless phones can
expose the user to measurable radiofrequency energy (RF) because of the short distance
between the phone and the user’s head. These RF exposures are limited by Federal
Communications Commission safety guidelines that were developed with the advice of
FDA and other federal health and safety agencies. When the phone is located at greater
distances from the user, the exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the source. The so-called
cordless phones; which have a base unit connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus produce RF exposures far below the
FCC safety limits.
4. What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have
suffered from flaws in their research methods. Animal experiments investigating the
effects of radiofrequency energy (RF) exposures characteristic of wireless phones have
yielded conflicting results that often cannot be repeated in other laboratories. A few
animal studies, however, have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of the studies that showed
increased tumor development used animals that had been genetically engineered or
treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in
the absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours
per day. These conditions are not similar to the conditions under which people use
wireless phones, so we don’t know with certainty what the results of such studies mean
for human health.
Three large epidemiology studies have been published since December 2000. Between
them, the studies investigated any possible association between the use of wireless
phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of
the brain or salivary gland, leukemia, or other cancers. None of the studies
demonstrated the existence of any harmful health effects from wireless phone RF
exposures. However, none of the studies can answer questions about long-term
exposures, since the average period of phone use in these studies was around three
years.
[ 151 ]
5. What research is needed to decide whether RF exposure from wireless
phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people actually
using wireless phones would provide some of the data that are needed. Lifetime animal
exposure studies could be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer promoting effect if one
exists. Epidemiological studies can provide data that is directly applicable to human
populations, but 10 or more years follow-up may be needed to provide answers about
some health effects, such as cancer. This is because the interval between the time of
exposure to a cancer-causing agent and the time tumors develop - if they do - may be
many, many years. The interpretation of epidemiological studies is hampered by
difficulties in measuring actual RF exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the angle at which the phone is held, or
which model of phone is used.
6. What is FDA doing to find out more about the possible health effects
of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of
investigators around the world to ensure that high priority animal studies are
conducted to address important questions about the effects of exposure to
radiofrequency energy (RF).
FDA has been a leading participant in the World Health Organization International
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of
this work has been the development of a detailed agenda of research needs that has
driven the establishment of new research programs around the world. The Project has
also helped develop a series of public information documents on EMF issues.
FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal
Cooperative Research and Development Agreement (CRADA) to do research on wireless
phone safety. FDA provides the scientific oversight, obtaining input from experts in
government, industry, and academic organizations. CTIA-funded research is conducted
through contracts to independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The CRADA will also include a
broad assessment of additional research needs in the context of the latest research
developments around the world.
7. How can I find out how much radiofrequency energy exposure I can get
by using my wireless phone?
All phones sold in the United States must comply with Federal Communications
Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures. FCC
established these guidelines in consultation with FDA and the other federal health and
safety agencies. The FCC limit for RF exposure from wireless telephones is set at a
Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The FCC limit is
consistent with the safety standards developed by the Institute of Electrical and
Electronic Engineering (IEEE) and the National Council on Radiation Protection and
Measurement. The exposure limit takes into consideration the body’s ability to remove
heat from the tissues that absorb energy from the wireless phone and is set well below
levels known to have effects.
[ 152 ]
Manufacturers of wireless phones must report the RF exposure level for each model of
phone to the FCC. The FCC website (http://www.fcc.gov/oet/rfsafety) gives directions for
locating the FCC identification number on your phone so you can find your phone’s RF
exposure level in the online listing.
8. What has FDA done to measure the radiofrequency energy coming from
wireless phones?
The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical
standard for measuring the radiofrequency energy (RF) exposure from wireless phones
and other wireless handsets with the participation and leadership of FDA scientists and
engineers. The standard, Recommended Practice for Determining the Spatial-Peak
Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications
Devices: Experimental Techniques, sets forth the first consistent test methodology for
measuring the rate at which RF is deposited in the heads of wireless phone users. The
test method uses a tissue-simulating model of the human head. Standardized SAR test
methodology is expected to greatly improve the consistency of measurements made at
different laboratories on the same phone. SAR is the measurement of the amount of
energy absorbed in tissue, either by the whole body or a small part of the body. It is
measured in watts/kg (or milliwatts/g) of matter. This measurement is used to
determine whether a wireless phone complies with safety guidelines.
9. What steps can I take to reduce my exposure to radiofrequency energy
from my wireless phone?
If there is a risk from these products--and at this point we do not know that there is--
it is probably very small. But if you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your exposure to radiofrequency energy
(RF). Since time is a key factor in how much exposure a person receives, reducing the
amount of time spent using a wireless phone will reduce RF exposure.
If you must conduct extended conversations by wireless phone every day, you could
place more distance between your body and the source of the RF, since the exposure
level drops off dramatically with distance. For example, you could use a headset and
carry the wireless phone away from your body or use a wireless phone connected to a
remote antenna.
Again, the scientific data do not demonstrate that wireless phones are harmful. But if
you are concerned about the RF exposure from these products, you can use measures
like those described above to reduce your RF exposure from wireless phone use.
10. What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones, including
children and teenagers. If you want to take steps to lower exposure to radiofrequency
energy (RF), the measures described above would apply to children and teenagers using
wireless phones. Reducing the time of wireless phone use and increasing the distance
between the user and the RF source will reduce RF exposure.Some groups sponsored by
other national governments have advised that children be discouraged from using
wireless phones at all. For example, the government in the United Kingdom distributed
leaflets containing such a recommendation in December 2000. They noted that no
[ 153 ]
evidence exists that using a wireless phone causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by children was strictly precautionary; it
was not based on scientific evidence that any health hazard exists.
11. What about wireless phone interference with medical equipment?
Radiofrequency energy (RF) from wireless phones can interact with some electronic
devices. For this reason, FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators
from wireless telephones. This test method is now part of a standard sponsored by the
Association for the Advancement of Medical instrumentation (AAMI). The final draft, a
joint effort by FDA, medical device manufacturers, and many other groups, was
completed in late 2000. This standard will allow manufacturers to ensure that cardiac
pacemakers and defibrillators are safe from wireless phone EMI. FDA has tested hearing
aids for interference from handheld wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This
standard specifies test methods and performance requirements for hearing aids and
wireless phones so that no interference occurs when a person uses a compatible phone
and a accompanied hearing aid at the same time. This standard was approved by the
IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible interactions with other
medical devices. Should harmful interference be found to occur, FDA will conduct
testing to assess the interference and work to resolve the problem.
12. Where can I find additional information?
For additional information, please refer to the following resources:
•
•
•
•
•
FDA web page on wireless phones
http://www.fda.gov/cdrh/phones/index.html
Federal Communications Commission (FCC) RF Safety Program
http://www.fcc.gov/oet/rfsafety
International Commission on Non-Ionizing Radiation Protection
http://www.icnirp.de
World Health Organization (WHO) International EMF Project
http://www.who.int/emf
National Radiological Protection Board (UK)
http://www.nrpb.org.uk/
July 18, 2001For updates: http://www.fda.gov/cdrh/phones
[ 154 ]
viewing 109
Index
C
Numerics
calendar
edit notes 106
1-touch dialing
assigning a number 57
call a 1-touch number 57
change a 1-touch number 58
erase a 1-touch number 58
erase notes 105
make note 104
move notes 106
send notes 106
view calendar 103
view day notes 104
view received notes 107
call forwarding
activate 48
A
accessories 126
batteries 129
chargers and other accessories
cancel 50
delay 49
status 50
XPress on covers 127
active call options
activate/cancel call waiting 42
answer a waiting call 42
call waiting 42
end the active call 43
reject a waiting call 43
switch between calls 43
third call waiting 43
answer a call 19
call log
clearing call lists 38
dialed calls 37
missed calls 36
options in call lists 38
received calls 37
call timers
reset to 0 59
automatic redial 50
show during calls 59
view duration 58
call waiting 42
caller ID 19
calling card calls
choose a calling card 52
make a calling card call 52
save calling card information 51
clock
B
battery
charge 11
important information 13
install 10
remove 12
browser menu 79
business cards
deleting 110
saving 109
alarm
manage the alarm 108
sending 109
[ 155 ]
set the alarm 107
display the clock 67
set the clock 66
in-call options
access the phone book 46
conference calls 47
end all calls 45
make a new call 44
messages 46
conference calls 47
convert currency 103
covers
put a call on hold 44
send touch tones 45
indicators 15
replacing 128
customer contact center number 8
international calls 58
D
display language 66
K
keyguard 68
keypad tones 63
keys and features
back 5
E
earpiece
volume 15
emergency calls 123
end a call 19
entering letters and numbers
special characters 29
standard text input 27
bottom 5
front 5
lights 5
L
label 2
F
Letters and numbers 27
lights
FAQ 136
keypad 5
G
games
M
Bantumi 111
Bumper 111
Pairs II 112
Snake II 111
Space Impact II 111
make a call 18
memory 35
menu shortcuts 22
message alert tone 63
message settings
message center number 85
message mode 86
message validity 86
H
help text 21
I
icons 15
[ 156 ]
scroll bar 21
scroll keys 6
N
Navi key 6
network services 7
security features
call restirctions 72
closed user groups 73
fixed dialing 71
keyguard 68
PIN codes 68
PUK codes 70
security code 71
SIM card
P
phone book
edit names and numbers 32
erase names and numbers 33
find names 31
find names in a call 31
options 34
save names and numbers 30
send names and numbers 32
view 35
install 9
memory status 35
notes 10
picture messages
start screen 14
system select 74
sending 99
sending with text 100
viewing 101
T
technical information 134
text messages
add words to the match list 91
e-mail messages 95
erasing 97
power key 5
profiles
customizing 60
renaming 66
selecting 41
forwarding 98
match list 90
reading 96
replying 97
resending 95
saving in outbox 94
sending 94
R
redial last number 20
reject a call 20
restore factory settings 66
ringing tones
assign 35
composer 113
downloading 112
options 62
set up 85
smileys
create a smiley 92
storage 99
volume 62
S
symbols 92
screen saver 64
[ 157 ]
templates
create a template 93
edit a template 93
use a template 93
writing with predictive text
input 87
W
WAP
browsing 78
connecting 77
navigate a WAP card 78
settings 75
writing with standard input 86
touch-tones 45
save touch-tone string 46
send touch-tone string 46
set touch-tone length 45
troubleshooting 135
two phone lines 53
welcome 75
warning and game tones 63
warranty 141
welcome note 3
V
vibrating alert 64
voice dialing
add a voice tag 53
change a voice tag 56
erase a voice tag 56
make a call with voice
recognition 55
play back a voice tag 55
voice mail
listen to your messages 39
save the mailbox number 40
[ 158 ]
NOTES
[ 159 ]
Para obtener un manual del usuario en español favor de
llamar o enviar un fax al teléfono 1-888-NOKIA-2U,
fax 813-249-9619.
[ 160 ]
|