Microsoft Windows Small Business Server 2011 2VG00202 User Manual

Quick Start Guide  
Windows® Small Business Server 2011 Standard  
Installing Your New Server  
Depending on how your server came from the manufacturer,  
your set up steps are slightly different. Follow the instructions  
that apply to your server, and then follow the instructions to  
connect other computers to it.  
01  
• If Windows SBS 2011 Standard came preinstalled on your  
server, follow the instructions for Scenario 1.  
• If Windows SBS 2011 Standard is not installed on your  
server, follow the instructions for Scenario 2.  
To get started, you will need the following items  
• Product Key  
• Router with firewall capability  
• Network cables  
NOTE: For help planning your installation, see  
Existing Server Migration  
If you already have a Windows Server domain, you can migrate  
the information on your existing server to the new server. Your  
existing server is known as your source server, and your new  
server is known as your destination server. Windows Small  
Business Server (Windows SBS) 2011 Standard Installation  
includes an integrated migration experience that helps you  
migrate from your current version of Windows SBS. If you  
choose to install the server in migration mode, you will be asked  
for specific information about your existing installation. Before  
you can migrate to the destination server, you will need to have  
this information ready.  
02  
If you choose a migration installation, you must thoroughly  
plan the migration and then prepare your source server  
and destination server as described in the information at  
http://go.microsoft.com/fwlink/?LinkID=193017. After your  
preparations are complete, follow the steps in the wizard to  
migrate to Windows SBS 2011 Standard.  
03  
NOTE: After you prepare the source server for the migration, you  
have 21 days to complete the migration process and shut down the  
source server.  
Step 1  
Connect Your Server to the Network  
You will likely have one of the following network configurations:  
04  
Basic network  
Router/Firewall  
Server with  
Internet  
keyboard, mouse  
and display  
Other computers  
n your network  
05  
Network with router and modem  
Router/Firewall  
Broadband  
modem / router  
Server with  
Internet  
keyboard, mouse  
and display  
Other computers  
n your network  
06  
Network with switch, router and modem  
Switch  
Broadband  
modem / router  
Server with  
Internet  
keyboard, mouse  
and display  
Other computers  
on your network  
07  
Common Networking Devices  
Broadband Enables your network to connect to the Internet through  
modem  
your Internet service provider (ISP).  
Firewall  
Helps secure your local network from unauthorized access  
from the Internet.  
Router  
Switch  
Sends, or routes, information between your network and  
another network, such as the Internet.  
Provides additional network connection points for  
computers and other devices.  
For more information about network requirements and  
supported configurations, see http://go.microsoft.com/  
fwlink/?LinkID=193018.  
NOTE: Some devices may be multipurpose, such as a router  
with firewall capabilities. Check your device manufacturer’s  
documentation for more information.  
08  
To connect your server to the network:  
1. Plug one end of a network cable into the network  
adapter on your server and the other end into the  
internal (local) interface on your router.  
IMPORTANT: Ensure that the network cable remains connected  
throughout the entire installation.  
2. Verify that your network hardware (such as your router) is  
powered on and is properly connected to the Internet.  
Step 2  
Setting up Your New Server: Scenario 1  
09  
Windows SBS 2011 came preinstalled on your server  
1. Connect the keyboard, monitor, and mouse to the server.  
2. Use an Ethernet cable to connect your server to your  
network, and then plug it in and turn it on.  
3. Follow the on-screen instructions to finish setting up your  
server. The computer may restart several times.  
Setting up Your New Server: Scenario 2  
10  
Windows SBS 2011 is not installed on your server  
1 Connect the keyboard, monitor, and mouse to the server.  
2. Use an Ethernet cable to connect your server to your  
network, and then plug it in and turn it on.  
3. Insert the installation DVD in the DVD drive, and then  
restart the server.  
11  
4. Choose to boot from the DVD drive.  
5. Follow the on screen instructions to finish setting up  
your server.  
NOTE: If you are not prompted to boot from the DVD drive, you  
may need to configure your computer’s BIOS settings so that the  
DVD drive is recognized as a startup disk. Different computer  
manufacturers have different methods for choosing the DVD drive  
as the startup disk. See your computer’s documentation for more  
information.  
Step 3  
Complete the Getting Started Tasks to Configure  
Your Server and Your Network  
12  
To help you finish configuring your network, the Windows  
SBS 2011 Standard Console Home page lists the Getting  
Started Tasks. Finish these tasks as soon as possible after  
you install Windows SBS 2011 Standard:  
1. Connect to the Internet: Configure your server and  
your network to connect them to the Internet. Click the  
Connect to the Internet task to get started.  
2. Enable Web technologies: You must run the Internet  
Address Management Wizard if you want to use Remote  
Web Access or send and receive e-mail over the Internet.  
The wizard also helps you set up a new or existing  
domain name to work with your server. Click the Set up  
your Internet address task to get started.  
13  
3. Protect your data: Configure and manage server backup.  
Click the Configure server backup task to get started.  
4. Add users, computers and devices: Enable users,  
computers and devices to access resources on your  
network, and learn how to add a shared printer to  
your network. Click the Add a new user account task  
to get started.  
5. Join computers to the Windows SBS 2011 Standard  
domain: Use a Web browser or portable media to run  
the Connect Computer program on each computer that  
is part of the network. Click the Connect computers to  
your network task to get started.  
NOTE: To connect to the Windows SBS 2011 network, a client  
computer must be running Windows XP Professional with Service  
Pack (SP) 3, Windows Vista® Business, Enterprise or Ultimate with  
SP2, or Windows 7 Professional, Enterprise or Ultimate.  
Quick Links and Help  
Where to get help  
14  
On your server  
If you have questions while you are installing your new  
server, completing tasks in the Console, or using the  
productivity tools for the network, click the Help links that  
appear on many pages.  
On the Internet  
Windows SBS Technical Library:  
In the Community  
Forums and blogs:  
Community resources:  
15  
Requirements for client access licenses  
Each user or device that accesses your network must have  
Windows SBS 2011 client access license (CAL) Suite. Your  
server software includes five CALs. For more information  
about purchasing additional CALs for Windows SBS 2011  
Standard, see the original equipment manufacturer or  
retailer.  
© 2010 Microsoft.  
Microsoft, Windows, and the Windows logo are trademarks  
of the Microsoft group of companies.  
X16-97957-01  

Nokia 3620 User Manual
LG Electronics LX290 User Manual
Lenoxx Electronics CD 10 User Manual
JVC XL Z132BK User Manual
Disney DCR4500 P User Manual
Dacor Flushing System Kit ACFS User Manual
Corsair 700D User Manual
Bodum Coffee Maker 1308 16 User Manual
Axxess Interface ABTI GM4 User Manual
Addonics Technologies JUPITER CIPHER EXDRIVE JCEDIU192 User Manual