Model CR401 User Guide
CD Receiver
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
I.H.T. IEC 825
English
Deutsch
CE MARKING
WARNINGS
Do not expose the equipment to rain or moisture.
WARNHINWEISE
-
- Das Gerät nicht Regen oder Feuchtigkeit
aussetzen.
- Die Abdeckung nicht vom Gerät abnehmen.
- Keine Gegenstände durch die Belüftungsschlitze
stecken.
English
- Do not remove the cover from the equipment.
- Do not insert anything into the equipment
through the ventilation holes.
- Do not handle the mains cord with wet hands.
- Do not cover the ventilation with any items such
as tablecloths, newspapers, curtains, etc.
- No naked flame sources, such as lighted
candles, should be placed on the equipment.
- When disposing of used batteries, please
comply with governmental regulations or
environmental public instruction’s rules that
apply in your country or area.
The CR401 is in conformity with the EMC directive and low-voltage directive.
Français
Le CR401 est conforme à la directive EMC et à la directive sur les basses tensions.
- Das Netzkabel nicht mit feuchten oder nassen
Händen anfassen.
Deutsch
Das Modell CR401 entspricht den EMC-Richtlinien und den Richtlinien für
Niederspannungsgeräte.
-
Decken Sie die Lüftungsöffnungen nicht mit einem
Tischtuch, einer Zeitung, einem Vorhang usw. ab.
- Es dürfen keine Gegenstände mit offener
Flamme, wie etwa brennende Kerzen, auf dem
Gerät aufgestellt werden.
- Beachten Sie bei der Entsorgung der
verbrauchten Batterien alle geltenden lokalen
und überregionalen Regelungen.
Nederlands
De CR401 voldoet aan de EMC eisen en de vereisten voor laag-voltage.
Español
El CR401 está de acuerdo con las normas EMC y las relacionadas con baja tensión.
-
Make a space of about 0.2 meter around the unit.
- No objects filled with liquids, such as vases,
shall be placed on the apparatus.
- When the switch is in the OFF position, the
equipment is not completely switched off from
MAINS.
Italiano
- Auf allen Geräteseiten muß ein Zwischenraum
von ungefähr 0,2 meter vorhanden sein.
Il CR401 è conforme alle direttive CEE ed a quelle per i bassi voltaggi.
-
Auf das Gerät dürfen keine mit Flüssigkeiten gefüllte
Behälter, wie etwa eine Vase, gestellt werden.
Svenska
CR401 är tillverkad i enlighet med EMC direktiven och direktiven för lågvoltsutrusning.
- Wenn der Schalter ausgeschaltet ist (OFF-
Position), ist das Gerät nicht vollständig vom
Stromnetz (MAINS) abgetrennt.
- The Socket-Outlet shall be installed near the
equipment and shall be easily accessible.
ENGLISH:
CAUTION –
- Die Netzsteckdose muss sich in der Nähe des
Gerätes befinden, und ein unbehinderter
Zugang dazu muss jederzeit gewährleistet sein.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
Français
AVERTISSEMENTS
-
Ne pas exposer l’appareil à la pluie ni à l’humidité.
- Ne pas essayer de retirer le boîtier de l’appareil.
FINNISH:
Nederlands
- Ne rien insérer dans l’appareil par les orifices de
ventilation.
- Ne pas manipuler le cordon d’alimentation avec
les mains mouillées.
- Ne pas recouvrir les ouïes de ventilation avec un
objet quelconque comme une nappe, un journal,
un rideau, etc.
- Ne placer aucune source de flamme nue,
comme une bougie allumée, sur l'appareil.
- Pour mettre au rebut les piles usées, respecter
les lois gouvernementales ou les règlements
officiels concernant l’environnement qui
s'appliquent à votre pays ou région.
- Veiller à ce qu’aucun objet ne soit à moins de
0,2 mètre des côtés de l'appareil.
- Aucun objet rempli de liquide, un vase par
exemple, ne doit être placé sur l'appareil.
- Lorsque l'interrupteur est sur la position OFF,
l'appareil n'est pas complètement déconnecté du
SECTEUR (MAINS).
VAROITUS!
Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa
altistaa käyttäjän turvallisuusluokan 1 ylittävuälle näkymättömälle lasersäteilylle.
WAARSCHUWINGEN
- Stel het apparaat niet bloot aan regen of vocht.
- Verwijder de afdekplaat van het apparaat niet.
- Duw niets door de ventilatieopeningen in het
apparaat.
- Raak het netsnoer niet met natte handen aan.
- Bedek de ventilatieopeningen niet met enige
voorwerpen, zoals tafelkleden, kranten,
gordijnen, enz.
- Plaats geen brandende voorwerpen, zoals
kaarsen, op het apparaat.
- Volg bij het weggooien van verbruikte batterijen
de overheidswetgeving of milieuvoorschriften op
die van kracht zijn in het land of de regio waarin
u zich bevindt.
SWEDISH:
VARNING!
Om apparaten används påannat sätt än vad som beskrivs 1 denna bruksanvisning
kan användaren utsättas för osynlig laserstrålning som overskrider gränsen för
laserklass 1 .
WARNINGS FOR LASER RADIATION
CAUTION : INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM.
DANGER : INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT
EXPOSURE TO BEAM.
VARO! :
AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET
ALTTIINANAKYMÄTTÖMÄALLE LASERSÄTEILYLLE. ÄLÄ KATSO
SÄTEESEEN.
- Zorg dat er 0,2 meter vrije ruimte rond het
toestel is.
- Plaats geen voorwerpen met een vloeistof erin,
zoals een bloemenvaas, op het apparaat.
- Als de schakelaar op OFF staat, is het apparaat
niet volledig losgekoppeld van de netspanning
(MAINS).
VARNING! :OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD OCH
SPÄRREN ÄR URKOPPLAD. BETRAKTA EJ STRALEN.
- La prise électrique doit se trouver près de
l'appareil et être facilement accessible.
-
Het stopcontact dient in de buurt van het apparaat
te zitten en eenvoudig bereikbaar te zijn.
Español
Svenska
ADVERTENCIAS
- No exponga el equipo a la lluvia ni a la
humedad.
VARNINGAR
- Utsätt inte utrustningen för regn eller fukt.
- Ta inte bort utrustningens hölje.
- No extraiga la tapa del equipo.
- No introduzca nada en el interior del equipo a
través de los orificios de ventilación.
- För inte in föremål i utrustningen genom
ventilationshålen.
- Hantera inte nätsladden med våta händer.
- No maneje el cable de alimentación con las
manos mojadas.
- No cubra la ventilación con objetos como
manteles, periódicos, cortinas, etc.
- No deben colocarse sobre el equipo elementos
con fuego, por ejemplo velas encendidas.
- Cuando se eliminen baterías usadas, deben
cumplirse las reglamentaciones oficiales o las
normas de protección medioambiental
aplicables en su país o en su zona.
- Täck inte för ventilationsöppningarna med några
föremål som till exempel bordsdukar,
dagstidningar, gardiner e.d.
- Inga föremål med öppen låga, som till exempel
tända stearinljus, bör placeras på utrustningen.
- Följ de lagar och miljöskyddsråd som gäller i det
land eller område där du bor när du gör dig av
med batterier.
- Se till att det finns omkring 0,2 meter fri plats
runt omkring enheten.
- Deje un espacio de unos 0,2 metro alrededor de
la unidad.
- No se deben colocar sobre el aparato
recipientes que contengan líquidos, como por
ejemplo jarrones.
- Cuando el interruptor está en la posición OFF, el
equipo no está completamente desconectado de
la alimentación MAINS.
- Inga objekt som är fyllda med någon vätska, till
exempel blomstervaser, bör placeras på
apparaten.
- Även om strömbrytaren står i det avstängda
läget OFF, så är utrustningen inte helt
bortkopplad från det elektriska nätet (MAINS).
- Uttaget ska vara installerat nära utrustningen
och vara lättillgängligt.
- La toma de corriente se debe instalar cerca del
equipo y ser de fácil acceso.
Italiano
AVVERTENZE
Non esporre l’apparecchio alla pioggia o all’umidità.
-
- Non rimuovere il coperchio dell’apparecchio.
- Non introdurre oggetti all’interno
dell’apparecchio attraverso i fori di ventilazione.
- Non toccare il cavo di alimentazione con le mani
bagnate.
- Non coprire le fessure di ventilazione con
tovaglie, giornali, tende od oggetti analoghi.
- Non posare sull'apparecchio sorgenti di fiamme
scoperte quali candele accese.
- Smaltire le pile usate in conformità alle norme
governative o disposizioni ambientali vigenti nel
proprio paese o zona.
- Lasciare 0,2 metro liberi tutto intorno l'unità.
- Non mettere sull'apparecchiatura alcun
contenitore di liquido, come ad esempio dei vasi.
- Quando l'interruttore è nella posizione OFF,
l'apparecchiatura non
scollegata da MAINS.
è
completamente
- La presa elettrica dovrebbe essere installata in
prossimità dell'apparecchio ed essere facilmente
accessibile.
TABLE OF CONTENTS
FEATURES
FEATURES.......................................................................................................1
AMP
• 30W/Ch into 6 ohms (1kHz, 10%)
• Tone Direct
• Tone Control for Treble and Bass
• 3 Audio Inputs and 2 Outputs for Tape, MD, DVD
BEFORE USE...................................................................................................2
PART NAME AND FUNCTIONS ......................................................................5
FRONT PANEL.........................................................................................................5
REAR PANEL ...........................................................................................................6
REMOTE CONTROL ................................................................................................7
CD
• Playback CD-DA and MP3 CDs
• Optical Digital Out
CONNECTIONS ...............................................................................................8
CONNECTING THE ANTENNA TERMINALS..........................................................8
CONNECTING SPEAKERS......................................................................................9
CONNECTING ANALOG / DIGITAL COMPONENTS ............................................10
Tuner
• AM/FM 40 Channels, Group Presets
General
• Audio Timer
• Sleep Timer
• Display Dimmer
BASIC OPERATION.......................................................................................11
CD OPERATION.............................................................................................12
PLAYING CD .........................................................................................................12
DISPLAYING INFORMATION ...............................................................................14
TUNER OPERATION .....................................................................................15
LISTENING TO FM/AM ..........................................................................................15
OTHER OPERATION .....................................................................................19
SETTING THE CLOCK ..........................................................................................19
TIMER PROGRAMS ..............................................................................................20
LAST FUNCTION MEMORY .................................................................................21
INITIALIZATION OF THE MICROPROCESSOR ...................................................21
A NOTE ABOUT RECYCLING
TROUBLESHOOTING....................................................................................22
SPECIFICATIONS & DIMENSIONAL DRAWINGS........................................24
OTHERS.........................................................................................................24
This product’s packaging materials are recyclable and can
be reused. This product and the accessories packed
together are the applicable product to the WEEE directive
except batteries.
Please dispose of any materials in accordance with your
local recycling regulations.
When discarding the unit, comply with your local rules or
regulations.
Batteries should never be thrown away or incinerated but
disposed of in accordance with your local regulations
concerning chemical wastes.
1
7
7
Do Not Touch Hot Spots During
and Immediately After Use
ABOUT DISCS
BEFORE USE
This section must be read before any connection is
made to the mains supply.
Playable discs
During and immediately after use, the CR401 is hot
in areas other than the controls and rear panel
connection jacks. Do not touch hot spots and
especially the top panel. Contact with hot areas
can cause burns.
Audio CD (CD-DA)
0.2 m or
more
7
Equipment mains working
setting
CD RECEIVER CR401
0.2 m
or more
0.2 m
or more
CD-R/CD-RW
7
Accessories
INPUT
MENU
DIRECT
Your Marantz product has been prepared to
comply with the household power and safety
requirements that exist in your area.
Finalized CD-R and CD-RW discs
recorded in the CD-DA format,
MP3 format can be played with
the unit.
BASS
TREBLE
• Remote control unit (RC601CR) x 1
• Size “AAA” batteries x 2
• AM loop antenna x 1
PUSH TO ENTER
VOLUME
STANDBY
POWER ON / STANDBY
PHONES
CR401 can be powered by 230V AC only.
7
Copyright
* Finalize is the process to make a CD-R/CD-RW
playable for players (not recorders)
Recording and playback of any material may
require consent. For further information refer to the
following:
0.2 m
or more
* Some discs may not be able to be played
depending on condition of the discs and
recording software.
– Copyright Act 1956
– Dramatic and Musical Performers Act 1958
– Performers Protection Acts 1963 and 1972
– Any subsequent statutory enactments and
orders
Structure of audio CD
Audio CDs contain music tracks only.
You can play them in conventional style through a
stereo system, using the keys on the remote
control and/or front panel.
7
Do not locate in the following
places
To ensure long-lasting use, do not locate the
CR401 where:
• FM indoor antenna x 1
• Exposed to direct sunlight.
• Near to sources of heat such as heaters.
• Highly humid or poorly ventilated.
• Dusty.
Noise or disturbance of the picture may be
generated if this unit or any other electronic
equipment using microprocessors is used near a
tuner or TV.
About playing copy-controlled CDs
• Subjected to mechanical vibrations.
If this happens, take the following steps:
Some copy-controlled CDs may not conform to
official CD standards. They are special discs and
may not play on the CR401.
• On wobbly, inclined or otherwise unstable
surfaces
• Install this unit as far as possible from the tuner
or TV.
• User Guide x 1
• Registration Card x 1
• Radiated heat is blocked such as in cramped
audio racks.
• Set the antenna wires from the tuner or TV away
from this unit’s mains cord and input/output
connection cords.
Discs made on personal computers
To ensure proper heat radiation, ensure the below
clearance from walls and other equipment.
Discs made on personal computers, including
those of a compatible format, may not work
properly in the CR401 because of incorrect
settings in the disc burning software. Check the
manual supplied with your disc burning software
for additional compatibility information.
• Noise or disturbance tends to occur particularly
when using indoor antennas or 300 Ω/ohms
feeder wires. We recommend using outdoor
antennas and 75 Ω/ohms coaxial cables.
Note
For heat dispersal, do not install this equipment
in a confined space such as a book case or
similar unit.
2
* Use discs which satisfy the CD standards
MP3 compatibility
7
Notes about the discs
such as those with the “CD logo” or “
mark on their disc label surfaces.
”
• MP3 discs must be ISO 9660 Level 1 or Level 2,
Joliet compliant. Supported formats: Mode 1,
Mode 2.
* Handle the discs carefully so as not to
scratch their surfaces.
No guarantees are made for playback if discs
which do not satisfy the appropriate CD
standards are used.
Similarly, no guarantees are made for their
sound quality even if it is possible to play such
discs.
* Keep the surfaces of the discs clean at all
times.
• Folders can be up to eight levels deep.
•
MP3 files must be MPEG-1/MPEG-2 Audio Layer
3 format with a sampling rate of between 16 kHz
and 48 kHz and a bit-rate of between 32 kbps and
320 kbps (128 kbps or 192 kbps recommended).
Incompatible files cannot be played.
When cleaning the surfaces of discs, always be
sure to use the special cleaner and wipe the
surfaces in the directions shown in the figure
below.
* To protect your discs from damage, avoid
placing them in the following locations.
• Fixed bit-rate MP3 files are recommended,
however, variable bit-rate (VBR) MP3 files
between 8 kbps and 320 kbps are supported
(Playing times may display incor-rectly).
• Where they will be exposed to direct sunlight
or where they will be close to a heater or other
heat-radiating appliance
• Where the humidity level is high or it is very
dusty
• MP3 files must have a “.mp3” or “.MP3” file
name extension. MP3 files without the proper
extension will not be recognized. To prevent
noise and malfunction, do not use these
extensions for other types of files.
• Near a window or other such location where
they may be exposed to rain
• Wipe the surface
radially from the
center.
• Do not wipe the
surface in the
circumferential
direction.
* Get into the habit of putting the discs back in
their cases after use.
• The CR401 supports up to 500 MP3 files and up
to 200 folders per disc. (In this case, Disc and
File names contain 30 characters and Folder
names contain 20 characters.) Files and folders
in excess of this cannot be played. Note that if
the file and folder structure is very complicated,
the CR401 may not be able to read or play all of
the MP3 files on the disc. If the disc, folder or file
names contain many characters, the CR401
may not support 500 MP3 files.
* Do not attach pieces of paper or stickers to
the label surfaces of the discs.
When a disc has a piece of plastic tape or rental
CD label with paste protruding from the edge or
when a disc still bears traces of sticky tape or
adhesive labels, do not attempt to play it. If
such a disc is played on the CD player, you may
find that you cannot remove it or that some other
kind of malfunctioning may occur.
• Disc names may contain up to 30 characters.
File and folder names may contain up to 60
characters.
• The maximum time that can be displayed for a
single track is 99 minutes and 59 seconds.
• The remaining time cannot be displayed when
playing MP3 files.
•
Multisession discs are supported, however,
some multisession discs may take a long time to
load and some may not load at all. When burning
CDs we recommend that you use a single
session (disc-at-once), and select “Disc Close.”
* Do not use discs which come in special
shapes.
Do not attempt to play heart-shaped or
octagonal discs or discs with any other special
shapes. You may find that you cannot remove
them or that some other kind of malfunctioning
may occur in the player.
• The ID3 tag version 1.0 is supported.
Notes
• With CD-ROM, CD-R, and CD-RW discs that
contain many files and folders, and files other
than MP3s, it may take a long time to read the
disc. We recommend that you include only MP3
files on your discs, use about 20 folders, and
limit folder nesting to three levels deep.
• In this manual, MP3 files are referred to as
tracks.
3
7
7
Loading batteries
Operating range of the
remote control unit
Before using the supplied remote control unit for
the first time, load the batteries in the remote
control unit. The batteries provided are used to
verify the operations of the remote control unit only.
• Point the remote control unit at the remote
sensor on the main unit as shown on the
diagram.
• The remote control unit can be used from a
straight distance of approximately 5 meters from
the main unit, but this distance will be shorter if
there are obstacles in the way or if the remote
control unit is not pointed directly at the remote
sensor.
1. Take hold of the tab on the battery cover which
is found on the back side of the remote control
unit, and pull it up.
• The remote control unit can be operated at a
horizontal angle of up to 30 degrees with respect
to the remote sensor.
2. Take load the two new size “AAA” batteries
inside the battery compartment while taking
care to align their polarities correctly with the
polarity markings (ª with ª and · with ·).
Notes
• It may be difficult to operate the remote control
unit if the remote sensor is exposed to direct
sunlight or strong artificial light.
Size “AAA” (SUM-4)
batteries x 2
• Do not press buttons on the main unit and
remote control unit simultaneously. Doing so
may result in malfunction.
• Neon signs or other devices emitting pulse-type
noise nearby may result in malfunction, so keep
the set as far away from such devices as
possible.
3. Push the battery cover down in the direction of
the arrow to close it.
Approx. 5m
Notes on batteries:
• Replace the batteries with new ones if the set
does not operate even when the remote control
unit is operated nearby the set. (The included
battery is only for verifying operation.)
RC601CR
• To prevent damage or leakage of battery fluid:
– Do not use a new battery together with an old
one.
– Do not use two different types of batteries.
– Do not short-circuit, disassemble, heat or
dispose of batteries in flames.
• If the battery fluid should leak, carefully wipe the
fluid off the inside of the battery compartment
and insert new batteries.
4
q POWER ON/STANDBY button
! PLAY/PAUSE 6 button
Press to turn power ON and press again to
switch to STANDBY mode.
This is used to start CD playback or pause CD
playback.
PART NAME AND FUNCTIONS
Note
FRONT PANEL
w Disc tray
If you press the PLAY/PAUSE 6 button in
except CD mode, the sound source is
changed to CD mode automatically.
e PHONES jack
For connecting stereo headphones. When the
headphones are connected to this jack, the
speaker sound is turned off.
! ! ! ! !
!
o i u y
! Easy JOG PUSH TO ENTER
CD Mode
Preceding or subsequent tracks can be
searched (tracks can be skipped) by turning
the jog dial clockwise or counterclockwise.
Push the this knob during play back CD, jump
to the next track.
CD RECEIVER CR401
r OPEN/CLOSE 0 button
Press this button to open and close the disc
tray.
Note
INPUT
MENU
DIRECT
Tuner Mode:
If you press the OPEN/CLOSE 0 button in
except CD mode, the sound source is
changed to CD mode automatically.
This knob is used in conjunction with the
MENU button, and is used to select and
determine the operation mode.
Also, this knob is used for the TUNING/PRESET
search.
In the tuning mode, the reception frequency is
tuned up or down. Turning the control in the
clockwise direction tunes the frequency up.
Tuning the control in the counterclockwise
direction tunes the reception frequency down.
In the preset mode, the selection of the preset
channel is moved up or down. The auto tuning
operation cannot be used when in this mode.
BASS
TREBLE
t
r
t Master VOLUME Knob
PUSH TO ENTER
VOLUME
To increase or decrease sound level. To
increase the sound level turn clockwise, and to
decrease turn counter-clockwise
STANDBY
y DIRECT button
POWER ON / STANDBY
PHONES
Used to select “Tone Direct On” or “Tone
Direct Off.”
u MENU button
Displays the Tuner menu.
i INPUT button
q
w
e
Used to select sound sources: CD, FM, AM,
TAPE, MD or DVD.
o Tone Control TREBLE
Adjusts the Treble sound while the Tone Direct
Off is selected.
! Tone Control BASS
Adjusts the Bass sound while the Tone Direct
Off is selected.
! Display
! STOP 7 button
This is used to stop the CD playback.
! IR SENSOR
5
a Antenna Terminal for FM Tuner
PART NAME AND FUNCTIONS
REAR PANEL
(75 ohms)
Connect an external FM antenna with a coaxial
cable, or a cable network FM source.
b Antenna Terminal for AM Tuner
(AM, GND)
Connect the supplied AM loop antenna. Use
the terminals marked “AM” and “GND”. The
supplied AM loop antenna will provide good
AM reception in most areas. Position the loop
antenna until you hear the best reception.
i
h
a
c Optical Digital Out Jack (CD)
SUB
WOOFER
FM(75
Ω)
GND AM
CD signals during playback are output digitally
from this optical jack.
ANTENNA
b
c
DIGITAL
OUT
R
L
d TAPE IN/OUT Jacks
TAPE
IN
MD
IN
DVD
IN
OPT
SPEAKERS
Connect the IN jacks to the output jacks of
Tape recorder and the OUT jacks to Tape
recoder input jacks.
L
MODEL NO. CR401
d
R
e MD IN/OUT Jacks
L
Connect the IN jacks to the output jacks of MD
or CD Recoder and the OUT jacks to MD or
CD Recorder input jacks.
R
OUT
OUT
AC IN
f AC Power cable
e
Connect to an AC power outlet. CR401 to be
powered by AC230V 50Hz.
g DVD IN Jacks
f
g
Connect the IN jacks to the output jacks of
DVD player.
h Subwoofer Preout Jack
Connect to a component speaker input of an
active subwoofer.
i Speaker terminals
Connect the speaker cord , observing the and
polarity of the cord and terminals.
6
⁄ DIMM button
¤ PAUSE 8 button
PART NAME AND FUNCTIONS
REMOTE CONTROL
The display’s brightness switches (in three
levels) each time this button is pressed.
Used to pause CD playback.
¤ PLAY 2 button
z
STANDBY/ON button
Press to turn power ON and press again to
switch to STANDBY mode.
⁄ AUTO TUNE button
Used to select the CD mode and start the CD
playback.
When pressed in the FM mode, receivable FM
stations are automatically stored in the preset
memory in order starting from preset channel
A1.
Note
If you press the PLAY 2 button in except CD
mode, the sound source is changed to CD
mode automatically.
x TIMER button
Used to set the timers.
CLOCK
CALL
⁄ MEMO button
c 5∞ button
Frequencies and station names can be stored
in the memory. When this button is pressed,
the “CH” indicator on the display flashes for 10
seconds.
Use the SHIFT button and the Preset channel
buttons during this time to designate the
desired preset channel.
¤ REPEAT button
‹
‹
z
x
Used to set the timers.
Used to select the MENU mode (UP/DOWN
CURSOR KEY)
Used with repeat playback.
TIMER
1
4
2
5
3
6
¤ VOLUME 5∞ button
Used to set the volume.
v --/--- button
c
7
8
9
--/---
Used to select the two or three digits CD
tracks.
v
m
¤ DISPLAY button
CLEAR
ENTER
MENU
10/0
Used to select the display mode.
b
n
¤
¤
⁄ DAB button
DISPLAY
¤
b ENTER button
This button does not function on CR401.
VOL
¤ CLEAR button
Used to set the timers/clock and the menu in
tuner/CD mode.
Used with memory playback.
INPUT
INPUT
MUTE
VOL
⁄ SLEEP button
MODE
REPEAT
Used with the Sleep Timer function.
‹ Nurmeric (ten keypad) button
,
.
¤
n MENU button
¤
¤
Used to select CD tracks, tuner presenting and
recalling stations.
⁄ SHIFT button
Used to enter or exit menu mode
¤
¤
⁄
⁄
Used to select the memory groups, A (1 ~ 10),
B (1 ~ 10), ... D (1 ~ 10).
TUNING
PRESET
m MUTE button
⁄
‹ CLOCK CALL button
Used to mute the CR401.
DIMM
DAB
FM
AM
Used to display the current time and used to
set the clock setting.
⁄ FM button
⁄
⁄
⁄
⁄
⁄
¤
¤
AUTO TUNE
MEMO
SLEEP
SHIFT
DIRECT
, MODE button
Used to select FM tuner.
Used to set Random Play or Memory Play in
CD mode.
Used to select the stereo mode or mono mode
when a FM stereo broadcast is received.
¤ DIRECT button
⁄
Used to select “Tone Direct On” or “Tone
Direct Off.”
⁄
REMOTE CONTROLLER
RC601CR
¤ AM button
. INPUT 1 2 button
Used to select AM tuner.
Used to select sound sources.
¤ 4 button
⁄ STOP 7 button
Used to select the previous track when CD
playback, or to select presets when the radio
used.
Used to stop the CD playback.
⁄ 1 button
Used to search backward when CD playback,
or to select tuning when the radio used.
¤ ¢ button
Used to select the next track when CD
playback, or to select presets when the radio
used.
⁄ ¡ button
Used to search forward when CD playback, or
to select tuning when the radio used.
7
7
7
AM loop antenna assembly
Connection of AM antennas
CONNECTIONS
1. Remove the vinyl tie and
take out the connection
line.
1. Push the lever.
CONNECTING THE ANTENNA TERMINALS
2. Connect to the AM antenna
2. Insert the conductor.
3. Return the lever.
terminals.
AM loop antenna
(Supplied)
3. Bend in the reverse
FM outdoor antenna
direction.
4.
a. With the antenna
on top any stable
surface.
Notes
•
Do not connect two FM antennas simultaneously.
Mount
• Even if an external AM antenna is used, do not
disconnect the AM loop antenna.
b. With the antenna
attached to the
wall.
• Make sure AM loop antenna lead terminals do
not touch metal parts of the panel.
SUB
WOOFER
FM(75
Ω
)
GND AM
75 Ω/ohms
ANTENNA
COAXIAL cable
DIGITAL
OUT
Installation hole Mount on the wall, etc.
R
L
TAPE
IN
MD
IN
DVD
IN
OPT
SPEAKERS
L
FM indoor antenna
(Supplied)
MODEL NO. CR401
R
L
Use tape or a
pin to fasten the
tip of the
R
OUT
OUT
AC IN
antenna to the
wall, a rack, etc.
AM outdoor antenna
Ground
8
Before you connect your speakers, read the
following:
7
Connecting a subwoofer
CONNECTIONS
Use the PRE OUT SUBWOOFER jack to connect
a powered subwoofer (the power amplifier is built
in ). If your subwoofer is a passive type (the power
amplifier is not built in), connect a monaural power
amplifier to the PRE OUT SUBWOOFER jack and
connect the subwoofer to the amplifier.
• Disconnect the mains cord from the wall outlet.
• Read the instructions supplied with your
speakers.
CONNECTING SPEAKERS
• Pay close attention to speaker wiring polarity. In
other words, connect positive ª terminals only
to positive ª terminals, and negative ·
terminals only to negative · terminals. If you
get them the wrong way around, the sound will
be out of phase and will sound odd.
FRONT SPEAKER
POWERED
SUBWOOFER
7
Connecting Speaker Wire
RIGHT
LEFT
1. Strip away approx. 10
mm (3/8 inch) of wire
insulation.
• Only use speakers with an impedance of 6 ohms
or higher. If you use speakers with a lower
impedance, and use the amplifier at high volume
levels for a long period of time, the built-in
protection circuit may be activated.
10 mm (3/8 inch)
2. Twist
the
• Unnecessarily long or very thin speaker wires
may affect the sound quality and should be
avoided.
bared wire
ends tight, to
prevent short
circuits.
• Be careful not to short the positive and negative
connections. Doing so may damage the CR401.
3. Push the terminal lever in
the direction of the arrow,
and keep this condition.
SUB
WOOFER
FM(75
Ω
)
GND AM
ANTENNA
DIGITAL
OUT
R
L
TAPE
IN
MD
IN
DVD
IN
OPT
SPEAKERS
L
• Don’t connect more than one wire to each
speaker terminal. Doing so may damage the
CR401.
MODEL NO. CR401
4. Insert the bare part of the
wire into the hole in the
side of each terminal.
R
L
• If you want to connect a single speaker instead
of a pair, connect it to either the left or right
speaker terminals, not both.
R
OUT
OUT
AC IN
5. Put the terminal lever
back, and make sure it is
fastened securely by
pulling the wire lightly.
9
7
Before Making Any
Connections
CONNECTIONS
•
Read the manuals supplied with your components.
CONNECTING ANALOG / DIGITAL COMPONENTS
• Don’t connect the mains cord until you’ve
completed and double-checked all connections.
2CH AUDIO
OUT
L
DVD PLAYER
Optical Digital Output
The CR401’s optical digital output has a shutter-
type cover that opens when an optical plug is
inserted and closes when it's removed. Push a
plug in all the way.
R
L
L
R
R
Caution
To prevent shutter damage, hold the optical plug
straight when inserting and removing.
RCA Connection Color Coding
RCA-type connections are usually color coded: red
and white.
SUB
WOOFER
FM(75
Ω
)
GND AM
ANTENNA
DIGITAL
OUT
R
L
TAPE
IN
MD
IN
DVD
IN
OPT
Use red plugs to connect right-channel audio
inputs and outputs (typically labeled “R”).
Use white plugs to connect left-channel audio
inputs and outputs (typically labeled “L”).
SPEAKERS
L
MODEL NO. CR401
R
• Push plugs in all the way to make good
connections (loose connections can cause noise
or malfunctions).
L
R
OUT
OUT
AC IN
• To prevent interference, keep audio cables away
from mains cords and speaker cables.
L
L
R
R
L
L
R
R
L
L
R
R
L
R
R
DIGITAL IN/OUT
OPTICAL
L
MD MD/CD
INPUT OUTPUT
ANALOG IN/OUT
CD/MD PLAYER
L
R
1
2
MD MD/CD
INPUT OUTPUT
CASSETTE TAPE DECK
LINE
IN OUT
L
R
10
i
BASIC OPERATION
CD RECEIVER CR401
7
7
Power Up the CR401
Adjusting the Volume
INPUT
MENU
DIRECT
Before connecting the mains cord, complete all
connections (ꢀ page 8 to 10).
BASS
TREBLE
1. To adjust the volume, use the Master VOLUME
knob t, or the VOLUME buttons ¤.
t
PUSH TO ENTER
VOLUME
• Turn the Master VOLUME knob t clockwise
to increase the volume, counterclockwise to
decrease it.
1. Connect the mains cord to a suitable wall outlet.
STANDBY
• The CR401 enters Standby mode, and the
POWER ON
/
STANDBY
PHONES
Standby indicator comes on.
2. To turn on the CR401, press the POWER
7
Using Headphones
ON/STANDBY switch q or
button z.
You can connect a pair of stereo headphones to
the CR401’s PHONES jack for private listening, as
shown.
q
• The CR401 comes on, the display lights up,
and the Standby indicator goes off.
• To turn off the CR401, press the POWER
CD RECEIVER CR401
ON/STANDBY switch q or
button z
again. The CR401 enters Standby mode and
the Standby indicator comes on.
INPUT
MENU
DIRECT
BASS
TREBLE
CLOCK
CALL
PUSH TO ENTER
VOLUME
z
7
Selecting Sound Sources
TIMER
1
4
2
5
8
STANDBY
POWER ON STANDBY
3
6
/
PHONES
1. Use the INPUT button i or . to select one of
the following sound sources: CD, FM, AM,
TAPE, MD and DVD.
7
9
--/---
CLEAR
ENTER
MENU
• The currently selected source is shown on the
display.
10/0
DISPLAY
Note
VOL
2. If you selected CD, see “PLAYING CD” on page
¤
Always turn down the volume before connecting
your head-phones.
12.
INPUT
INPUT
MUTE
VOL
• If you selected AM or FM, see “LISTENING
MODE
REPEAT
TO FM/AM” on page 15.
.
• If you selected TAPE, MD, or DVD, start
playback on the relevant component.
TUNING
PRESET
DIMM
DAB
FM
AM
AUTO TUNE
MEMO
SLEEP
SHIFT
DIRECT
REMOTE CONTROLLER
RC601CR
11
• To enter a track number greater than or equal to
100, press --/--- button v twice.
For example, to enter tranck number 123, press
--/--- button v twice, 1, 2 and 3.
!!
!
CD OPERATION
CD RECEIVER CR401
• For MP3, fast reverse only works within the MP3
track that is currently playing.
PLAYING CD
INPUT
MENU
DIRECT
7
Repeat Playback
BASS
TREBLE
1. Press the POWER ON/STANDBY switch q or
• If you press the button for more than four
seconds, the fast forward or fast reverse speed
increases.
Use the Repeat function to play a track, a folder for
MP3 only or a disc repeatedly.
button z to turn on the power.
PUSH TO ENTER
VOLUME
2. Press the OPEN/CLOSE 0 button r to open
the disc tray, put the CD on the tray with the
label-side facing up, and press the
OPEN/CLOSE 0 button r again to close the
tray.
r
STANDBY
1. During playback, press the REPEAT button ¤
POWER ON
/
STANDBY
PHONES
7
To Select Tracks
repeatedly to select repeat mode.
On the CR401:
D-Rpt: Repeat the disc
• Turn the Easy JOG 4/¢ knob ! to select a
track for playback.
• Be sure to put 8 cm discs in the center of the
tray.
q
Label side
• If you select a track while playback is stopped,
press the Easy JOG 4/¢ knob ! to start
playback.
F-Rpt: Repeat current folder (MP3 only)
• Press the Easy JOG 4/¢ knob ! to jump to
the next track during playback.
CLOCK
CALL
z
On the remote controller:
TIMER
1
4
2
5
8
• Press the ¢ button ¤ to select the next track,
or the 4 button ¤ to select the previous track.
3
6
3. Press the PLAY/PAUSE 6 button ! or
‹
PLAY 2 button ¤ to start playback.
T-Rpt: Repeat current track
• If you press the 4 button ¤ during playback or
while play-back is paused, the beginning of the
current track is selected.
7
9
• Playback starts and the “2” indicator appears
on the display.
--/---
v
CLEAR
ENTER
MENU
10/0
DISPLAY
• If you select a track while playback is stopped,
press the PLAY 2 button ¤ to start playback.
Note
VOL
If you press the OPEN/CLOSE 0 button r or
PAUSE 8 button ¤ in except CD mode, the
sound source is changed to CD mode
automatically.
INPUT
INPUT
MUTE
VOL
MODE
REPEAT
Note
¤
2. To cancel Repeat playback, press the REPEAT
button ¤ repeatedly to turn off the “Rpt”
indicator.
¤
¤
With CDs and MP3 discs that contain many
tracks, playback may take a while to start.
¤
¤
⁄
⁄
TUNING
PRESET
⁄
7
To Stop Playback
7
DIMM
AUTO TUNE
MEMO
DAB
FM
AM
Selecting Tracks by Number
• Press the STOP 7 button ! or ⁄.
Notes
SLEEP
SHIFT
DIRECT
Use the number buttons to select specific tracks.
• If you press the REPEAT button ¤ during
memory playback, your custom program will play
“D-Rpt” and “T-Rpt” only.
1. Use the number buttons to enter a track
7
To Pause Playback
number. Playback starts automatically.
• Press the PLAY/PAUSE 6 button ! or
PAUSE 8 button ¤. “8” indicator appears on
the display.
• For MP3 disc, select the serial number assigned
to the track.
• If you press the REPEAT button ¤ during
random playback for CD, you will use random
playback repeatedly.
REMOTE CONTROLLER
RC601CR
• To enter a track number smaller than or equal to
10, press each Numeric button ‹.
For example, to enter track number 10, press
10/0.
Use the --/--- button v to enter track numbers
above 10.
• To resume playback, press the PLAY/PAUSE
6 button ! or PLAY 2 button ¤.
7
To Fast Forward or Fast Reverse
(remote controller only)
• To enter a track number from 11 to 99, press --
/--- button v once.
For example, to enter track number 15, press --
/--- button v , 1 and 5.
• During playback or while playback is paused,
press and hold the ¡ button ⁄ to fast forward,
or the 1 button ⁄ to fast reverse.
12
7
To Stop Memory Playback
CD OPERATION
!!
!
• Press the STOP 7 button ! or ⁄.
CD RECEIVER CR401
7
7
7
Random Playback
Memory Playback
To Remove the Last Track in
the Program
INPUT
MENU
DIRECT
Use the Random function to play tracks in random
order.
Use the Memory function to make a custom
program of your favourite tracks.
BASS
TREBLE
• While memory playback is stopped, press the
CLEAR button ¤. Each time you press it, the
last track in the program is removed.
PUSH TO ENTER
VOLUME
1. While stopped, press the MODE button ,
1. While stopped, press the MODE button ,
repeatedly until the “Mem” indicator appears on
the display.
repeatedly to display “D-Rdm” indicator.
STANDBY
POWER ON
/
STANDBY
PHONES
7
To Cancel Memory Playback
2. To add a track to your program, use the 4
button ¤ and ¢ button ¤ to select it, and
then press the ENTER button b.
2. Press the PLAY 2 button ¤ to start random
• While memory playback is stopped, press the
MODE button , repeatedly until the “Mem”
indicator disappears. The entire program will be
deleted.
playback.
• All tracks are played in random order.
3. To start memory playback, press the PLAY 2
button ¤.
3. To cancel random playback, stop playback, and
then press the MODE button , repeatedly until
the “Rdm” indicator disappears.
Notes
Advice
• If the total playing time of your program exceeds
99 minutes and 59 seconds, "--:--" is displayed.
(This does not affect program playback.)
• Memory playback stops automatically when all
CLOCK
CALL
the tracks in the program have been played.
• You can add up to 20 tracks to your program.
TIMER
• The program is deleted when the disc tray is
opened or select the CD normal play mode by
MODE button ,.
1
4
7
2
• Tracks can also be added by using the number
buttons.
3
6
5
8
• For information on using the number buttons to
select a track, see “Selecting Tracks by Number”
on page 12.
9
--/---
CLEAR
ENTER
MENU
10/0
¤
b
,
DISPLAY
• You can check which tracks you’ve added to the
program by using the 1 button ⁄ and ¡
button ⁄.
VOL
INPUT
INPUT
MUTE
VOL
MODE
REPEAT
¤
¤
⁄
TUNING
PRESET
¤
⁄
⁄
DIMM
DAB
FM
AM
AUTO TUNE
MEMO
SLEEP
SHIFT
DIRECT
REMOTE CONTROLLER
RC601CR
13
CD OPERATION
7
DISPLAYING INFORMATION
MP3 Disc
CLOCK
CALL
Elapsed track time:
The length of time that the current track has
been playing (default display).
This section explains how to display various
information, including the remaining track time,
remaining disc time, and ID3 tag for MP3 tracks.
TIMER
1
4
2
5
3
6
7
8
1. During playback, press the DISPLAY button ¤
repeatedly to cycle through the following
options.
9
--/---
CLEAR
ENTER
MENU
10/0
DISPLAY
¤
VOL
Track name:
Name of the current track.
7
Audio CD
INPUT
INPUT
MUTE
VOL
MODE
REPEAT
Elapsed track time:
The length of time that the current track has
been playing (default display).
TUNING
PRESET
DIMM
DAB
FM
AM
Folder name:
Name of the current folder.
AUTO TUNE
MEMO
SLEEP
SHIFT
DIRECT
Remaining track time:
The amount of time remaining for the current
track (“R” indicator appears).
REMOTE CONTROLLER
RC601CR
Title name:
Title of the current track (if ID3 tag present).
Remaining disc time:
The amount of time remaining for the entire disc
(“T” indicator appears).
Notes
• To display the disc name, while playback is
stopped, press the DISPLAY button ¤.
• If a track or folder name contains a character
that cannot be displayed, it will be displayed as
“*”.
14
8. Either turn the Easy JOG 4/¢ knob ! or
7. Press the Easy JOG 4/¢ knob ! or ENTER
press the 1 button ⁄ or ¡ button ⁄.
button b to set the manual tuning mode.
TUNER OPERATION
• Automatic searching begins, then stops when
a station tuned in.
7
LISTENING TO FM/AM
Default value
STEREO receive mode
Auto tuner presets
7
FM Auto preset memory
8. Either turn the Easy JOG 4/¢ knob ! or
press the 1 button ⁄ or ¡ button ⁄ to tune
in the desired station.
87.5 / 89.1 / 98.1 / 108 / 90.1 / 90.1 /
90.1 / 90.1 / 90.1 / 90.1 MHz
1. Press the POWER ON/STANDBY switch q or
A1 ~ A10
B1 ~ B10
button z to turn on the power.
TUNED mode
522 / 603 / 999 / 1404 / 1611 kHz,
90.1 / 90.1 / 90.1 / 90.1 / 90.1 MHz
• The frequency changes continuously when
the 1 button ⁄ or ¡ button ⁄ on the
remote control unit is held in.
2. Watching the display, press the INPUT button
AUTO TUNING mode
i or . or FM button ⁄ to select the FM band.
C1 ~ C10 90.1 MHz
D1 ~ D10 90.1 MHz
Notes
!
i u
• When in the auto tuning mode on the FM band,
the
broadcast is tuned in. At open frequencies, the
noise is muted and the tuned off.
display on the panel when the stereo
CD RECEIVER CR401
7
Auto tuning (FM/AM)
3. Press the AUTO TUNE button ⁄.
INPUT
MENU
DIRECT
• If the signal is weak, if may be difficult to tune
into the station in stereo. In such a case, press
the MODE button , on the remote control. FM
stereo broadcasts are received in monaural and
BASS
TREBLE
1. Press the POWER ON/STANDBY switch q or
button z to turn on the power.
PUSH TO ENTER
VOLUME
2. Watching the display, press the INPUT button
i or . or FM button ⁄ or AM button ¤ to
select the desired band (AM or FM).
the
is not illuminated. To return to stereo
STANDBY
POWER ON
/
STANDBY
PHONES
4. Press the ENTER button b.
mode, press the MODE button , on the remote
control again.
• The unit automatically begins searching for
FM broadcast stations.
• If tuning does not stop at the desired station.
Use “Manual tuning” operation.
q
3. Press the MENU button u or n to select
7
Manual tuning (FM/AM)
CLOCK
CALL
menu.
z
c
1. Press the POWER ON/STANDBY switch q or
4. Either turn the Easy JOG 4/¢ knob ! or
press the 5 or ∞ button c to select “Search
Mode”.
• When the first FM broadcast station is found,
that station is stored in the preset memory at
channel A1.
TIMER
1
4
7
2
button z to turn on the power.
3
6
2. Watching the display, press the INPUT button
i or . or FM button ⁄ or AM button ¤ to
select the desired band (AM or FM).
5
8
• Subsequent stations are automatically stored
in order at preset channels A1 to A10, B1 to
B10, C1 to C10, D1 to D10 for a maximum of
40 stations.
9
--/---
CLEAR
ENTER
MENU
10/0
3. Press the MENU button u or n to select
b
n
DISPLAY
menu.
VOL
• Channel A1 is tuned in after the auto preset
memory operation is completed.
4. Either turn the Easy JOG 4/¢ knob ! or
press the 5 or ∞ button c to select “Search
Mode”.
5. Press the Easy JOG 4/¢ knob ! or
INPUT
INPUT
MUTE
VOL
ENTER button b to set search mode.
MODE
REPEAT
,
.
Notes
6. Either turn the Easy JOG 4/¢ knob ! or
5. Press the Easy JOG 4/¢ knob ! or
press the 5 or ∞ button c to select “Auto”.
• If an FM station cannot be preset automatically
due to poor reception, use the “Manual tuning”
operation to tune in the station, then preset it
using the manual “Preset memory” operation.
ENTER button b to set search mode.
TUNING
PRESET
⁄
6. Either turn the Easy JOG 4/¢ knob ! or
⁄
DIMM
DAB
FM
AM
press the 5 or ∞ button c to select “Manual”.
¤
AUTO TUNE
MEMO
SLEEP
SHIFT
DIRECT
•
To interrupt this function, press the POWER
ON/STANDBY switch q or button z
⁄
.
⁄
7. Press the Easy JOG 4/¢ knob ! or
• Perform this operation from the remote control
unit.
ENTER button b to set the auto tuning mode.
REMOTE CONTROLLER
RC601CR
15
• This allows you to easily find out the latest
traffic conditions in your area before you
leaving home.
7
RDS (Radio Data System)
TUNER OPERATION
• RDS (works only on the FM band) is a
broadcasting service which allows station to
send additional information along with the
regular radio program signal.
• Radio Text (RT)
7
7
Preset stations (FM/AM)
1. Use the “Auto tuning” or “Manual tuning”
operation to tune in the station to be preset in
the memory.
Recalling preset stations
(FM/AM)
• RT allows the RDS station to send text
messages that appear on the display.
• The following three types of RDS information
On the CR401:
1.Press the POWER ON/STANDBY switch q to
can be received on this unit:
Note
2. Press the MENU button u or n to select
• The operations described below pressing the
DISPLAY button ¤ will not function in areas in
which there are no RDS broadcasts.
turn on the power.
• Program Type (PTY)
menu.
2. Watching the display, press the INPUT button
• PTY identifies the type of RDS program.
3. Either turn the Easy JOG 4/¢ knob ! or
i to select FM or AM.
• The program types and their displays are as
follows:
press the 5 or ∞ button c to select “Memory”.
!
i u
3. Press the MENU button u to select menu.
4. Turn the Easy JOG 4/¢ knob ! to select
CD RECEIVER CR401
NEWS
News
“Search Mode”.
AFFAIRS
INFO
Current Affairs
Information
Sports
INPUT
MENU
DIRECT
BASS
TREBLE
SPORT
4. Press the Easy JOG 4/¢ knob !, or
ENTER button b to set the preset mode and
make the preset channel number flash.
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
Education
Drama
PUSH TO ENTER
VOLUME
5. Press the Easy JOG 4/¢ knob ! to set
STANDBY
Culture
POWER ON
/
STANDBY
PHONES
search mode.
Science
6. Turn the Easy JOG 4/¢ knob ! to select
Varied
“Preset”.
Pop Music
Rock Music
Easy Listening Music
Light Classical
q
• Steps 1 to 4 can be skipped when using the
MEMO ⁄ button.
When this button is pressed, the preset
memory standby mode is set, regardless of
the menu setting at that time.
ROCK M
EASY M
LIGHT M
CLOCK
CALL
CLASSICS Serious Classical
OTHER M Other Music
WEATHER Weather
FINANCE Finance
CHILDREN Children’s Programs
7. Press the Easy JOG 4/¢ knob ! and set
z
5. While the preset channel number is flashing,
either press the SHIFT button ⁄ to select the
desired memory group (A to D).
the preset mode.
TIMER
1
4
2
5
8
3
6
‹
c
7
6. While the preset channel number is flashing,
either turn the Easy JOG 4/¢ knob !,
press the 5 or ∞ button c or Numeric button
‹ to select the desired preset channel (1 to
10).
9
--/---
CLEAR
ENTER
MENU
SOCIAL
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
Social Affairs
Religion
10/0
b
n
DISPLAY
¤
8. Watching the display, turn the Easy JOG
4/¢ knob ! to select the desired preset
channel.
VOL
Phone In
Travel
INPUT
INPUT
MUTE
VOL
7. While the preset channel number is flashing,
either press the Easy JOG 4/¢ knob ! or
MEMO button ⁄ to store the station in the
preset memory.
MODE
REPEAT
Leisure
On the remote controller:
Jazz Music
-1
1 . Press the 4 button ¤ or ¢ button ¤ to
COUNTRY Country Music
TUNING
PRESET
¤
¤
select the desired preset channel.
• To preset other channels, repeat steps 2 to 6.
NATION M National Music
-2
¤
⁄
1 .Press the SHIFT button ⁄ and select the
DIMM
DAB
FM
AM
• A total of 40 broadcast stations can be preset
— 10 stations (channels 1 to 10) in each of
groups A to D.
OLDIES
FOLK M
Oldies Music
Folk Music
desired memory group (A to D) .
AUTO TUNE
MEMO
SLEEP
SHIFT
DIRECT
-3
1 .Press the Numeric button ‹ to select the
DOCUMENT Documentary
desired preset channel (1 to 10).
⁄
⁄
• Traffic Program (TP)
REMOTE CONTROLLER
RC601CR
• TP identifies programs that carry traffic
announcements.
16
• The station name is displayed on the display
after searching stops.
8. Either turn the Easy JOG 4/¢ knob ! or
press the 5 or ∞ button c. The RDS search
automatically begins and the “RDS Search”
blinks.
TUNER OPERATION
RDS search
7.
• If no other RDS station is found when all the
frequencies are searched, “NO RDS” is
displayed.
7
• If there is no station broadcasting the
designated program type above operation, all
the reception bands are searched.
Use this function to automatically tune to FM
stations that provide RDS service.
• If no other TP station is found when all the
frequencies are searched, “NO programme”
is displayed.
• The station name is displayed on the display
after searching stops.
1. Press the MENU button u or n to select
7
PTY search
• Use this function to find RDS stations
menu.
9.
broadcasting a designated program type (PTY).
• For a description of each program type, refer to
“Program Type (PTY)”.
!
u
• If no other station broadcasting the
designated program type is found when all the
frequencies are searched, “NO programme”
is displayed.
CD RECEIVER CR401
2. Either turn the Easy JOG 4/¢ knob ! or
1. Press the MENU button u or n to select
press the 5 or ∞ button c to display “RDS”.
menu.
INPUT
MENU
DIRECT
2. Either turn the Easy JOG 4/¢ knob ! or
BASS
TREBLE
press the 5 or ∞ button c to display “RDS”.
3. Press the Easy JOG 4/¢ knob ! or
ENTER button b to set the RDS search
selection mode.
PUSH TO ENTER
VOLUME
7
TP search
3. Press the Easy JOG 4/¢ knob ! or
ENTER button b to set the RDS search
selection mode.
Use this function to find RDS stations broadcasting
traffic program (TP).
STANDBY
POWER ON
/
STANDBY
PHONES
4. Either turn the Easy JOG 4/¢ knob ! or
press the 5 or ∞ button c to display “PTY
Search”.
1. Press the MENU button u or
2. Either turn the Easy JOG 4/¢ knob ! or
n
to select menu.
4. Either turn the Easy JOG 4/¢ knob ! or
press the 5 or ∞ button c to display “RDS
Search”.
press the 5 or ∞ button c to display “RDS”.
3. Press the Easy JOG 4/¢ knob ! or
ENTER button b to set the RDS search
selection mode.
CLOCK
CALL
5. Press the Easy JOG 4/¢ knob ! or
ENTER button b to set the PTY search
selection mode.
4. Either turn the Easy JOG 4/¢ knob ! or
press the 5 or ∞ button c to display “TP
Search”.
TIMER
1
4
2
5
3
6
5. Press the Easy JOG 4/¢ knob ! or
ENTER b button to set the RDS search
standby mode.
6. Watching the display, either turn the Easy JOG
4/¢ knob ! or press 5 or ∞ button c to
call out the desired program type.
c
7
8
9
--/---
CLEAR
ENTER
MENU
10/0
b
n
DISPLAY
VOL
5. Press the Easy JOG 4/¢ knob ! or
ENTER button b to set the TP search standby
mode.
INPUT
INPUT
MUTE
VOL
6. Either turn the Easy JOG 4/¢ knob ! or
press the 5 or ∞ button c. The RDS search
automatically begins and the “RDS Search”
blinks.
MODE
REPEAT
• When receiving an RDS station, its program
type is displayed first.
TUNING
PRESET
• If no RDS station is found with above
operation, all the reception band are
searched.
• When not receiving an RDS station, “PTY”
flashes.
DIMM
DAB
FM
AM
AUTO TUNE
MEMO
SLEEP
SHIFT
DIRECT
7. Press the Easy JOG 4/¢ knob ! or
ENTER button b to set the PTY search
standby mode.
6. Either turn the Easy JOG 4/¢ knob ! or
press the 5 or ∞ button c. The RDS search
automatically begins and the “RDS Search”
blinks.
• When the broadcast station is found, that
station’s name appears on the display.
7.
REMOTE CONTROLLER
RC601CR
• If no TP station is found with above operation,
all the reception bands are searched.
17
7
Switching RDS information
display
!
u
TUNER OPERATION
RT (Radio Text)
CD RECEIVER CR401
1. Use the procedure described at “Auto tuning”,
“Manual tuning” or “Recalling preset stations” to
tune in a frequency with an RDS station.
7
7
CT (Clock Time)
INPUT
MENU
DIRECT
1. Press the MENU button u or
n
to select menu.
• You can set clock time automatically by using
the RDS stations broadcasting Clock Time (CT)
information.
BASS
TREBLE
2. Press the DISPLAY button ¤ to switch the
2. Either turn the Easy JOG 4/¢ knob ! or
RDS reception information.
PUSH TO ENTER
VOLUME
press the 5 or ∞ button c to display “RDS”.
• The display switches as shown below each
time the DISPLAY button ¤ is pressed.
This unit picks CT information up and
automatically resets itself, when you set “CT
ON”.
3. Press the Easy JOG 4/¢ knob ! or
ENTER button b to set the RDS search
selection mode.
STANDBY
POWER ON
/
STANDBY
PHONES
q PS:
The program service name and frequency
of the station tuned in is displayed.
4. Either turn the Easy JOG 4/¢ knob ! or
press the 5 or ∞ button c to display “RT
ON/OFF”.
1. Press the MENU button u or
n
to select menu.
2. Either turn the Easy JOG 4/¢ knob ! or
press the 5 or ∞ button c to display “RDS”.
CLOCK
3. Press the Easy JOG 4/¢ knob ! or
ENTER button b to set the RDS search
selection mode.
CALL
TIMER
The above is an example for when there is
TP data but no RT data.
1
4
2
5
3
6
4. Either turn the Easy JOG 4/¢ knob ! or
press the 5 or ∞ button c to display “CT
ON/OFF”.
5. Press the Easy JOG 4/¢ knob ! or
ENTER button
b
to set the RT ON/OFF
c
7
8
9
--/---
selection mode.
w PTY:
CLEAR
ENTER
MENU
10/0
The program type of the tuned in
broadcast is displayed.
6. Either turn the Easy JOG 4/¢ knob !,
press the 5 or ∞ button c to choose the “RT
ON” or “RT OFF”.
b
n
DISPLAY
¤
VOL
INPUT
INPUT
MUTE
VOL
MODE
REPEAT
5. Press the Easy JOG 4/¢ knob ! or
ENTER button
b
to set the CT ON/OFF
selection mode.
TUNING
PRESET
6. Either turn the Easy JOG 4/¢ knob !,
press the 5 or ∞ button c to choose the “CT
ON” or “CT OFF”.
7. Press the Easy JOG 4/¢ knob ! or
ENTER button b to set whether to enable or
stop the RADIO TEXT function.
e CT:
DIMM
DAB
FM
AM
The current time is displayed.
AUTO TUNE
MEMO
SLEEP
SHIFT
DIRECT
• If no text data is being broadcast, “NO TEXT
DATA” is displayed.
REMOTE CONTROLLER
RC601CR
7. Press the Easy JOG 4/¢ knob ! or
ENTER button b to set whether enable or stop
the CT function.
• If you live close to the border with another
country, the CT information may have been
taken from a radio station in another time
zone.
In this case you should select “CT OFF”.
In this mode, although “CT” data are entered,
the time is not changed to the current time.
18
7. Press the 5 or ∞ button c to set the minutes,
and press the ENTER button b. The display
flashes.
!
!
o
y
OTHER OPERATION
CD RECEIVER CR401
7
Muting the CR401
SETTING THE CLOCK
Present time setting
5
5
INPUT
MENU
DIRECT
Use this function to mute the output of the CR401
temporarily.
5 5
BASS
TREBLE
7
PUSH TO ENTER
VOLUME
• To operate the timer program, you must set the
present time.
The clock time can be set 12-hour or 24-hour
system.
The clock displays “SUNDAY” “12H SYSTEM”
“0:00AM” at initial.
8. Press the ENTER button b to confirm the
1. Press the MUTE button m.
actual time. The clock now starts.
• The output is muted and “Muting” flashes on
STANDBY
• In the event of a power failure or when the AC
mains cord is disconnected. You must reset
the clock.
POWER ON
/
STANDBY
PHONES
the display.
2. To unmute the CR401, press the MUTE button
m again, or adjust VOLUME 5∞ button ¤.
1. Press the CLOCK CALL button ‹. Then the
• The output is unmuted and “Muting” goes off.
7
Displaying present time
“CLOCK 0:00AM” is displayed.
Note:
1. A present time can be displayed for 5 seconds
CLOCK
CALL
The Mute function is cancelled when the CR401
is set to Standby.
by pressing the CLOCK CALL button ‹.
‹
TIMER
1
4
2
3
6
5
8
2. Press the ENTER button b, the day of the
7
Adjusting the Bass & Treble
c
b
7
week flashes.
9
--/---
Use the Bass and Treble functions to adjust the
tone of the sound to your personal preference.
CLEAR
ENTER
MENU
10/0
DISPLAY
7
Displaying present time in
Standby mode
VOL
¤
1. Press the DIRECT button y or ¤ to select
m
INPUT
INPUT
MUTE
VOL
“Tone Direct Off”.
MODE
REPEAT
3. Press the 5 or ∞ button c to select a day.
If you want to be displayed the present time in
Standby mode, press the CLOCK CALL button ‹
in Standby mode.
2. Use the Tone control Bass knob ! or the
Tone control TREBLE knob o to adjust the
bass or treble.
4. Press the ENTER button b, “12H SYSTEM” is
flashes.
TUNING
PRESET
¤
¤
Note
¤
DIMM
DAB
FM
AM
Setting the CR401 to display the present time
will slightly increase the power consumption in
Standby mode.
AUTO TUNE
MEMO
SLEEP
SHIFT
DIRECT
7
Using Direct Mode
In Direct mode, the bass and treble tone circuits
are bypassed, creating a shorter signal path for a
purer sound.
If you want to select 24H SYSTEM, either press
the 5 or ∞ button c.
REMOTE CONTROLLER
RC601CR
5. Press the ENTER button b to set the desired
1. Press the DIRECT button y or ¤ to select
system. The hour digit flashes.
“Tone Direct On”.
2. To turn off Direct mode, press the DIRECT
5
button y or ¤ again to select “Tone Direct Off”.
5
6. Press the 5 or ∞ button c to set the hours and
press the ENTER button b. The minute digit
flashes.
19
6. The display indicate “TIMER PROGRAM x
FM/AM”. Either turn the Easy JOG 4/¢
knob ! or press the 5 or ∞ button c, the
display changes “TIMER PROGRAM x FM/AM”.
10. Set the On time.
OTHER OPERATION
TIMER PROGRAMS
7
Timer Program Setting
• You must set the clock time before you set the
timer programs.
7
About the Timer Programs
q Either turn the Easy JOG 4/¢ knob !
or press the 5 or ∞ button c to adjust the
hour for the On time and press the Easy
JOG 4/¢ knob ! or ENTER button
b.
• This unit has three timer programs so that you
can turn it on and off automatically at certain
times and on certain days of the week.
• You need to store preset stations before you set
the timer programs.
7. Press the Easy JOG 4/¢ knob ! or
ENTER button b to select “CD”, “FM/AM”,
“TAPE”, “MD” or “DVD”.
1. Press the TIMER button x, “TIMER
• Timer programs can be set for single operation
(Once) or everyweek operation (Everyweek) or
everyday operation (Everyday) or the days of
the week operation (Weekday).
PROGRAM 1” is displayed.
w Either turn the Easy JOG 4/¢ knob !
or press the 5 or ∞ button c to adjust the
minutes for the On time and press the
Easy JOG 4/¢ knob ! or ENTER
button b.
8. Either turn the Easy JOG 4/¢ knob ! or
press the 5 or ∞ button c to select Preset
station to be programed.
7
Timer Program Examples
11. Set the Off time.
2. The display changes as follows each time the
Easy JOG 4/¢ knob ! is turned or the 5
or ∞ button c is pressed.
• The following examples highlight some of the
ways in which you can use the timer programs.
Timer program 1: To wake up to your favorite
radio station every morning, set as follows:
9. Select the Operation method.
TIMER PROGRAM 1
TIMER PROGRAM 2
TIMER PROGRAM 3
TIMER PROGRAM 1 SET → FM/AM → A1 FM
87.50MHz → EVERYDAY → ON TIME=
7:00AM → OFF TIME= 7:30AM
(If you want a radio alarm only on weekdays,
select “WEEKDAY” instead of “EVERYDAY”
and specify “MON-FRI”.)
Timer program 2: To listen a radio program on
only this Sunday, set as follows:
TIMER PROGRAM 2 SET → FM/AM → B1
AM522kHz → ONCE → SUNDAY → ON
TIME= 9:00PM → OFF TIME=10:00PM
q Either turn the Easy JOG 4/¢ knob !
or press the 5 or ∞ button c to adjust the
hour for the Off time and press the Easy
JOG 4/¢ knob ! or ENTER button
b.
3. Press the Easy JOG 4/¢ knob ! or
ENTER button b to select timer program
number.
q
Either turn the Easy JOG 4/¢ knob !
or press the 5 or ∞ button c to select
operation method “ONCE”, “EVERYWEEK”,
“EVERYDAY” or “WEEKDAY” .
4. The display indicate “TIMER PROGRAM x
SET”.
w Either turn the Easy JOG 4/¢ knob !
or press the 5 or ∞ button c to adjust the
minutes for the Off time.
w Press the Easy JOG 4/¢ knob ! or
ENTER button b to decide the operation.
When you select “ONCE” or “EVERYWEEK”,
you can select the day of the week by turning
the Easy JOG 4/¢ knob ! or pressing
the 5 or ∞ button c.
12. Set the timer program.
q Press the Easy JOG 4/¢ knob ! or
ENTER button b to decide the timer
program setting.
Either turn the Easy JOG 4/¢ knob ! or
press the 5 or ∞ button c, the display changes
as follows.
7
Timer Program Overlap
• If two or three timer programs are set to the
same ON TIME, the timer program with the
lowest number has priority.
Standby indicator lights up green and
setting contents are scrolled.
When you select “WEEKDAY”, use the
Easy JOG 4/¢ knob ! or pressing
the 5 or ∞ button c to select the first day,
and then press the Easy JOG 4/¢
knob ! or ENTER button b.
Use the Easy JOG 4/¢ knob ! or
pressing the 5 or ∞ button c to select the
last day.
TIMER PROGRAM x SET
TIMER PROGRAM x CONFIRM
TIMER PROGRAM x ON
TIMER PROGRAM x OFF
Notes
For example, if Timer program 1 and Timer
program 2 are both set to an ON TIME of
7:00AM, Timer program 1 has priority and Timer
program 2 is ignored.
• Timer program can activate regardless of power
on or standby mode.
• If timer program is already available, to select
“TIMER PROGRAM x CONFIRM” to scroll the
timer setting contents.
• When timer program is finished, the unit goes to
standby mode.
Timer program 1: 7:00AM
(This timer has priority)
-
1:00PM
• If timer program is already available, to select
“TIMER PROGRAM x ON” to activate the
timer.
Then press the Easy JOG 4/¢ knob
! or ENTER button b.
• When timer program is activated, standby
indicator lights green.
Timer program 2: 7:00AM - 0:30PM
If the setting of the two timer program overlaps,
the earlier timer has priority.
• You can cancel the Timer program setting
procedure at any time by pressing the TIMER
button x.
• To select “TIMER PROGRAM x OFF” to turn
off the timer program.
Timer program 1: 9:00AM - 10:00AM
5. Press the Easy JOG 4/¢ knob ! or
ENTER button b to select “TIMER PROGRAM
x SET”.
Timer program 2: 8:00AM
(This Timer program has priority)
-
10:00AM
20
LAST FUNCTION MEMORY
!
u
OTHER OPERATION
CD RECEIVER CR401
• This unit is equipped with a last function memory
which stores the input and output setting
conditions as they were immediately before the
power is switched off.
This function eliminates the need to perform
complicated resettings when the power is turned
on.
7
7
Confirm and change timer
program
• You can check and change the timer program
setting as follows.
Sleep timer
INPUT
MENU
DIRECT
BASS
TREBLE
• The sleep timer function allows the unit to be in
standby mode automatically after specific period
of time.
PUSH TO ENTER
VOLUME
1. Press the SLEEP button ⁄ on the remote
STANDBY
• The unit is also equipped with a back-up
memory.
This function provides approximately one week
of memory storage when the main unit’s power
switch is off and with the mains cord
disconnected.
1. Press the TIMER button x.
2. Either turn the Easy JOG 4/¢ knob ! or
press the 5 or ∞ button c to select timer
program number.
POWER ON
/
STANDBY
PHONES
control.
q
3. You can change the displayed contents with the
Easy JOG 4/¢ knob ! or 5 or ∞ button
c and ENTER buttons b if necessary.
2. Each press of the button will increase the time
CLOCK
CALL
before shut down in the following sequence.
Note
z
x
INITIALIZATION OF THE
MICROPROCESSOR
OFF 10
20
30
60
90 120
TIMER
• Timer program is not changed if you quit
confirming halfway through a procedure.
1
4
2
3
6
9
5
8
3. The sleep timer will be shown for 5 seconds in
the display, and it will count down until the time
has elapsed. When the programed sleep timer
has elapsed, the unit will automatically turn off.
c
7
• When the indication of the display is not normal
or when the operation of the unit does not shows
the reasonable result, the initialization of the
microprocessor is required by the following
procedure.
7
--/---
Timer program off
CLEAR
ENTER
MENU
10/0
b
n
1. Press the TIMER button x, “TIMER
DISPLAY
PROGRAM 1” is displayed.
VOL
Note that the display will be dimmed when the
sleep timer is programed.
2. Either turn the Easy JOG 4/¢ knob ! or
press the 5 or ∞ button c to select timer
program number.
INPUT
INPUT
MUTE
VOL
1. Unplug the mains cord from the power outlet
MODE
REPEAT
4. Press the SLEEP button ⁄. The display shows
after pressing the POWER ON/STANDBY
the remaining time until standby mode begins.
switch q or
button z and setting the
3. Press the Easy JOG 4/¢ knob ! or
ENTER button b, “TIMER PROGRAM x SET”
is displayed.
standby mode.
5. To cancel the sleep timer, press the SLEEP
button ⁄ repeatedly until the display shows
“SLEEP OFF”.
TUNING
PRESET
2. Holding both the MENU button u and POWER
ON/STANDBY switch q, plug the mains cord
into the power outlet.
DIMM
DAB
FM
AM
4. Either turn the Easy JOG 4/¢ knob ! or
press the 5 or ∞ button c to select “TIMER
PROGRAM x OFF”.
• When the sleep timer is programed, DIMMER
function does not activate.
AUTO TUNE
MEMO
SLEEP
SHIFT
DIRECT
3. Check that the entire display is flashing with an
interval of about 1 second, and release your
fingers from the
2
buttons and the
microprocessor will be initialized.
⁄
REMOTE CONTROLLER
RC601CR
Notes
• If step 3 does not work,start over from step 1.
5. Press the Easy JOG 4/¢ knob ! or
• If the microprocessor has been initialized all the
button settings are reset to the default values
(the values set upon shipment from the factory).
ENTER button b to turn off the timer program.
Note
• To turn a timer program back on again, repeat
this procedure and select “TIMER PROGRAM x
ON”.
21
Symptom
Cause
Measures
Page
TROUBLESHOOTING
If a problem should arise, first check the following.
• A strong light source is
interfering with the CR401’s
remote sensor.
•
Make sure that the CR401 is
not subjected to direct sunshine
or inverter-type fluorescent
lights. Relocate if necessary.
4
1. Are the connections correct?
2. Have you operated the receiver according to the operating instructions?
3. Are the speakers and other components operating properly?
Hissing noise is heard
on FM broadcasts.
• Antenna cable is not properly
connected.
• Antenna is not pointing in the
right direction.
• Connect the leads properly.
• Point the antenna in the right
direction.
8
8
If this unit is not operating properly, check the items listed in the table below. Should the problem persist,
there may be a malfunction. Disconnect the power immediately and contact your store of purchase.
• Install an outdoor antenna.
8
• Radio waves are weak.
Symptom
Cause
Measures
Page
Hissing or buzzing
sound is heard on AM
broadcasts.
• Noise from a TV or
interference in the signals sent • Change the position of the
from the broadcast station.
• Turn off the TV.
8
8
Power does not turn on • Mains cord’s plug is not
• Plug the mains cord in
properly.
when POWER
ON/STANDBY switch is
pressed.
plugged into wall outlet.
loop antenna.
• Install an outdoor antenna.
8
9
8
Booming sound
(humming) is heard in
AM broadcasts.
• Signals transmitted over the
main cord are modulated by
the power source frequency.
• Insert the plug in the opposite
direction.
• Install an outdoor antenna.
There’s no sound
coming from the
speakers?
• The speaker cables are not
connected properly.
• Check the speaker
9
connections and make sure
that none of the wires are
touching each other, other
connectors, or any metal parts.
Reception is noisy,
intermittent, and the
indicator
• You’re too far away from the
transmitter. Or, your FM
antenna is in the wrong
position or pointing in the
wrong direction. Or, the
station’s signal strength is
poor.
• Switch the FM Mode to Mono.
• Adjust the position, height, and
direction of your FM antenna.
• Install an outdoor FM antenna,
preferably one with many
elements. Installing an out-
door antenna is a specialist’s
job, so contact your nearest
dealer for advice.
15
8
• The volume is set at minimum. • Turn up the volume.
• The CR401 is muted.
11
19
• Unmute the CR401.
flickers?
8
• A pair of headphones is
connected.
• The wrong input source is
selected.
• A connecting cable may be
damaged.
• Turn down the volume, then
disconnect the headphones .
• Check the input source setting.
11
11
10
• Check your connecting cables
for signs of damage and
replace as necessary.
The radio presets no
longer work?
• The power cord has not been
connected to a wall outlet, or
the power has been turned off
for an extended period.
•
Preset your favourite radio
16
stations again. The power cord
must be plugged into a wall
outlet a few times each month
in order to preserve the presets.
Sound is coming from
only one speaker?
• The other speaker’s cable is
not connected properly.
• Check the speaker
9
connections and make sure
that none of the wires are
touching each other, other
connectors, or any metal parts.
The RDS (Radio Data
System) doesn’t seem
to work?
• The current FM station does
not support RDS.
• The signal strength is poor, or • Install an outdoor FM antenna,
there’s too much interference.
• Tune into a station that
supports RDS.
17
8
Nothing happens when • Are the batteries dead?
remote control buttons
• Replace the batteries with new
ones.
• Operate from closer to the
main unit.
4
4
4
change the position or
direction of your outdoor FM
antenna, and keep it away
from fluorescent lights.
are pressed.
• Is the remote control unit too
far away?
• Is there an obstacle between
the remote control unit and the
main unit?
• You have pressed the wrong
button.
• Remove the obstacle.
CD playback skips?
Noise is generated.
• The CR401 is subject to
vibration.
• The disc is dirty.
• Install the CR401 somewhere
free of vibration.
• Remove the disc and clean it.
• Buy a new disc.
2
• Press the desired button.
7
4
3
3
• The disc is very scratched.
• Batteries are not set in their
proper direction (ª and ·).
• Set the batteries in the proper
direction.
• DTS CD is being replayed.
• Do not replay DTS CD, which
2
is not supported by the CR401.
22
Symptom
Cause
Measures
Page
Can’t play a CD?
• The disc is upside down.
• Load the disc with the label-
side facing up.
12
• The disc is dirty.
• Condensation has formed
inside the CR401.
• Remove the disc and clean it.
• Remove the disc and leave the
CR401 turned on for several
hours until the condensation
has evaporated.
3
2
• The CD-R/RW disc is
nonstandard.
• See “Disc Notes”.
2
2
It takes a long time to
read CD/MP3.
• It may take a longer time to
read CD/MP3 with many track
numbers.
• This is not a malfunction.
It takes a long time to
locate certain tracks.
• The disc is dirty.
• The disc is very scratched.
• Remove the disc and clean it.
• Buy a new disc.
3
2
The clock is wrong?
• CT (Clock Time) information
has been taken from a radio
station in another time zone.
• Set the clock by Manual
operation.
19
19
11
9
No sound is output
when a timed playback
or recording task starts? CR401 is muted.
• While a timed recording task is
in progress, the output of the
•
To hear what’s being recorded,
press the MUTE button to
cancel the Mute function. Press
it again to mute the CR401.
• Set the volume to a suitable
• For timed playback, the
volume is determined by the
VOLUME control.
level.
Standby indicator
flashes.
• The protection circuit may be
activated.
• Make sure not to short-circuit
the positive and negative
speaker wires.
Abnormal Behavior:
The CR401 contains a microcomputer for signal processing and control functions. In very rare situations,
severe interference, noise from an external source, or static electricity may cause it to lockup. In the
unlikely even that this should happen, unplug the power cord from the wall outlet, wait at least five
seconds, and then plug it back in again.
23
SPECIFICATIONS & DIMENSIONAL DRAWINGS
OTHERS
AMP
AM
Tuning Frequency Range
........................... 522–1611 kHz 9kHz step
The section describes the care and maintenance tasks that must be performed to optimize the operation of
your Marantz equipment.
Power Output ........30 W + 30 W (6 Ω THD=10%)
THD (Total Harmonic Distortion)
............................0.22% (15 W output 6 Ω)
Input Sensitivity and Impedance...............200 mV
Frequency Response
.......................20 Hz-90 kHz/( –3 dB /Line)
Tone Control....... +8 dB, –8 dB, 100 Hz – 10 kHz
Speaker Impedance................................... 6–8 Ω
Usable Sensitivity ..................................... 320 µV
S/N Ratio .................................................... 45 dB
THD (Total Harmonic Distortion) ................1.00%
7
Cleaning of equipment external surfaces
The exterior finish of your unit will last indefinitely with proper care and cleaning, Never use scouring pads,
steel wool, scourging powders or harsh chemical agents (e.g., lye solution), alcohol, thinner, benzine,
insecticide or other volatile substances as these wil mar the finish of the equipment. Likewise, never use
cloths containing chemical substances. If the equipment get dirty, wipe the external surfaces with a soft,
lint-free cloth.
CD
Frequency Response ........20 Hz–20 kHz ( 1 dB)
Audio Dynamic Range.................................93 dB
THD (Total Harmonic Distortion) ................0.01%
Wow and Flutter
................Below threshold of measurability
Audio Output/Impedance (Analog)
FM
Tuning Frequency Range
........................87.5–108 MHz 50 kHz step
Usable Sensitivity .......................2.2 µV (75ΩIHF)
S/N Ratio.............................Stereo 68 dB (IHF-A)
....................................Mono 69 dB (IHF-A)
THD (Total Harmonic Distortion)
...................................Stereo 0.3% (1 kHz)
.....................................Mono 0.2% (1 kHz)
Frequency Response
.................30 Hz–15 kHz/+1.5 dB, –1.5 dB
Stereo Separation.......................... 40 dB (1 kHz)
If the equipment becomes heavily soiled:
• dilute some washing up liquid in water, in a ratio of one part detergent to six
parts water.
• dip a soft, lint-free cloth in the solution and wring the cloth till it is damp.
• wipe the equipment with the damp cloth.
........................................1.3 V (rms) /1 kΩ
S/N Ratio .....................................................93 dB
• dry the equipment by wiping it with a dry cloth.
General
Power Supply..............................AC 230V, 50 Hz
Power Consumption .....................................74 W
Stand-by Power Consumption.....................0.8 W
Dimensions (W x H x D)
........................210 W x 146 H x 336 D mm
Weight.........................................................5.7 kg
7
Repairs
Only the most competent and qualified service technicians should be allowed to service the factory-
trained warranty station personnel have the knowledge and special facilities needed for repair and
calibration of this precision equipment. After the warranty period has expired, repairs will be performed for
a charge if the equipment can be returned to normal operation.
In the event of difficulty, refer to your dealer or write directly to the nearest location to you that is listed on
the Marantz Authorized Service Station list. If writing, please include the model and serial number of the
equipment together with a full description of what you think is abnormal about the equipment's behaviour.
* Specifications subject to change without prior
notice.
336
312
12
12
210
CD RECEIVER CR401
INPUT
MENU
DIRECT
BASS
TREBLE
PUSH TO ENTER
VOLUME
STANDBY
POWER ON / STANDBY
PHONES
(mm)
24
You can find your nearest authorized distributor or dealer on our website.
U.S.A.
Marantz America, Inc.
Marantz Europe B.V.
1100 Maplewood Drive, Itasca, IL 60143, U.S.A.
EUROPE
P.O. Box 8744, 5605 LS Eindhoven, The Netherlands
is a registered trademark.
Printed in China
11/2005 00M49BW851310 mzh-d
|